03:10:26 Starting Observatory v1.63  12/8/14
03:10:26 Startup delay was 5 sec
03:10:26 Process ID=856  UTC is 2018-11-26  03:10:26.171; local time is 2018-11-26  03:10:26.171 Coordinated Universal Time (diff=0 min)
03:10:26 High-resolution performance counter is available; frequency is 2194.540000 MHz
03:10:26 Master has allocated shared memory
03:10:26 Reading parameter file ObservatoryControlFile.txt
03:10:26 Apparatus is type 2 (Alaska)
03:10:26 Detailed log 0
03:10:26 Pointing head type specified by Observatory control file is SkyScan
03:10:26 SkyScan model specified by Observatory control file is 0
03:10:26 Pointing head communications specified by Observatory control file via COM1
03:10:26 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
03:10:26 Corrections added to script-specified directions are az=-4.000000, ze=6.500000
03:10:26 High-resolution performance counter has been disabled by Observatory control file
03:10:26 Filter type is 4
03:10:26 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
03:10:26   LASER           220            yes C 
03:10:26 Driver init  Result=78
03:10:26 Board name=""
03:10:26 Board entry="No Open Layers boards installed"
03:10:26 Board status=0
03:10:26 Get version result=0   SDK version is "V6.2.1.0"
03:10:26 Get driver version result=39   Version is "[unknown]"
03:10:26 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
03:10:26 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
03:10:26 Digital I/O configure subsystem 0 as input
03:10:26 Set data flow result=40
03:10:26 Configure result=40
03:10:26 Digital I/O configure subsystem 0 as output
03:10:26 Set data flow result=40
03:10:26 Configure result=40
03:10:37 SkyScan init: port=COM1  logFile=Observatory_20181126031026.txt  detail=0
03:10:37 Init port COM1
03:10:37 Successful CreateFile
03:10:37 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
03:10:37 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
03:10:37 SkyScan port init result=0
03:10:37 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
03:10:37 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
03:10:37 SkyScan SmartMotor 1 sw rev=25
03:10:38 SkyScan SmartMotor 2 sw rev=2
03:10:38 SkyScan SmartMotor 2 response was=2VERSION 100


03:10:38 SkyScan SmartMotor 1 (az) counts/rev=24000
03:10:38 SkyScan SmartMotor 2 (ze) counts/rev=24000
03:10:38 SkyScan initialization result=0
03:10:38 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
03:10:38 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
03:10:38 FLIList err=0  nWheels=1
03:10:38 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
03:10:38 FLIOpen err=0  dev=0
03:10:38 FLIGetHWRevision err=0  hwRev=0
03:10:38 FLIGetFWRevision err=0  fwRev=32768
03:10:38 FLIGetFilterCount err=0  nFilters=6
03:10:38 FLIGetFilterPos err=0  currentPosition=-1
03:10:38 FLIGetStepsRemaining err=0  RemainingSteps=0
03:10:38 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
03:10:38 FLIFreeList err=0
03:10:38 Observatory log will be written every 1200000 msec
03:20:38 No messages received for 10 min. 0 sent since last one of these.
03:26:36 * END OF LOG *