12:25:38 Starting Observatory v1.63  12/8/14
12:25:38 Startup delay was 5 sec
12:25:38 Process ID=456  UTC is 2018-7-11  12:25:38.906; local time is 2018-7-11  12:25:38.906 Coordinated Universal Time (diff=0 min)
12:25:38 High-resolution performance counter is available; frequency is 2194.530000 MHz
12:25:38 Master has allocated shared memory
12:25:38 Reading parameter file ObservatoryControlFile.txt
12:25:38 Apparatus is type 2 (Alaska)
12:25:38 Detailed log 0
12:25:38 Pointing head type specified by Observatory control file is SkyScan
12:25:38 SkyScan model specified by Observatory control file is 0
12:25:38 Pointing head communications specified by Observatory control file via COM1
12:25:38 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
12:25:38 Corrections added to script-specified directions are az=-4.000000, ze=6.500000
12:25:38 High-resolution performance counter has been disabled by Observatory control file
12:25:38 Filter type is 4
12:25:38 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
12:25:39   LASER           220            yes C 
12:25:39 Driver init  Result=78
12:25:39 Board name=""
12:25:39 Board entry="No Open Layers boards installed"
12:25:39 Board status=0
12:25:39 Get version result=0   SDK version is "V6.2.1.0"
12:25:39 Get driver version result=39   Version is "[unknown]"
12:25:39 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
12:25:39 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
12:25:39 Digital I/O configure subsystem 0 as input
12:25:39 Set data flow result=40
12:25:39 Configure result=40
12:25:39 Digital I/O configure subsystem 0 as output
12:25:39 Set data flow result=40
12:25:39 Configure result=40
12:25:54 SkyScan init: port=COM1  logFile=Observatory_20180711122538.txt  detail=0
12:25:54 Init port COM1
12:25:54 Successful CreateFile
12:25:54 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
12:25:54 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
12:25:54 SkyScan port init result=0
12:25:54 listen_skyscan result=10000 from ByChars "¹RSP "
12:25:59 SkyScan SmartMotor 1 sample rate/firmware version result=10000,10000 ""
12:25:59 listen_skyscan result=10000 from ByChars "²RSP "
12:26:05 SkyScan SmartMotor 2 sample rate/firmware version result=10000,10000 ""
12:26:05 listen_skyscan result=10000 from ByChars "¹GOSUB3 "
12:26:05 SkyScan initialization result=10000
12:26:06 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
12:26:06 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
12:26:06 FLIList err=0  nWheels=1
12:26:06 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
12:26:06 FLIOpen err=0  dev=0
12:26:06 FLIGetHWRevision err=0  hwRev=0
12:26:06 FLIGetFWRevision err=0  fwRev=32768
12:26:06 FLIGetFilterCount err=0  nFilters=6
12:26:06 FLIGetFilterPos err=0  currentPosition=-1
12:26:06 FLIGetStepsRemaining err=0  RemainingSteps=0
12:26:06 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
12:26:06 FLIFreeList err=0
12:26:06 Observatory log will be written every 1200000 msec
12:36:06 No messages received for 10 min. 0 sent since last one of these.
[UTC 2018-7-11  12:46:06]
[UTC 2018-7-11  13:06:06]
[UTC 2018-7-11  13:26:07]
[UTC 2018-7-11  13:46:07]
[UTC 2018-7-11  14:06:07]
[UTC 2018-7-11  14:26:07]
[UTC 2018-7-11  14:46:07]
[UTC 2018-7-11  15:06:07]
[UTC 2018-7-11  15:26:07]
[UTC 2018-7-11  15:46:07]
[UTC 2018-7-11  16:06:07]
[UTC 2018-7-11  16:26:07]
[UTC 2018-7-11  16:46:07]
[UTC 2018-7-11  17:06:07]
[UTC 2018-7-11  17:26:07]
[UTC 2018-7-11  17:46:07]
[UTC 2018-7-11  18:06:07]
[UTC 2018-7-11  18:26:07]
[UTC 2018-7-11  18:46:07]
[UTC 2018-7-11  19:06:07]
[UTC 2018-7-11  19:26:07]
[UTC 2018-7-11  19:46:07]
[UTC 2018-7-11  20:06:07]
[UTC 2018-7-11  20:26:07]