07:43:09 Starting Observatory v1.63  12/8/14
07:43:09 Startup delay was 5 sec
07:43:09 Process ID=3232  UTC is 2018-4-9  07:43:09.937; local time is 2018-4-9  07:43:09.937 Coordinated Universal Time (diff=0 min)
07:43:09 High-resolution performance counter is available; frequency is 2194.510000 MHz
07:43:09 Master has allocated shared memory
07:43:09 Reading parameter file ObservatoryControlFile.txt
07:43:09 Apparatus is type 2 (Alaska)
07:43:09 Detailed log 0
07:43:09 Pointing head type specified by Observatory control file is SkyScan
07:43:09 SkyScan model specified by Observatory control file is 0
07:43:09 Pointing head communications specified by Observatory control file via COM1
07:43:09 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
07:43:09 Corrections added to script-specified directions are az=-4.000000, ze=6.500000
07:43:09 High-resolution performance counter has been disabled by Observatory control file
07:43:09 Filter type is 4
07:43:09 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
07:43:10   LASER           220            yes C 
07:43:10 Driver init  Result=78
07:43:10 Board name=""
07:43:10 Board entry="No Open Layers boards installed"
07:43:10 Board status=0
07:43:10 Get version result=0   SDK version is "V6.2.1.0"
07:43:10 Get driver version result=39   Version is "[unknown]"
07:43:10 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
07:43:10 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
07:43:10 Digital I/O configure subsystem 0 as input
07:43:10 Set data flow result=40
07:43:10 Configure result=40
07:43:10 Digital I/O configure subsystem 0 as output
07:43:10 Set data flow result=40
07:43:10 Configure result=40
07:43:15 SkyScan init: port=COM1  logFile=Observatory_20180409074309.txt  detail=0
07:43:15 Init port COM1
07:43:15 Successful CreateFile
07:43:15 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
07:43:15 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
07:43:15 SkyScan port init result=0
07:43:15 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
07:43:16 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
07:43:16 SkyScan SmartMotor 1 sw rev=25
07:43:16 SkyScan SmartMotor 2 sw rev=2
07:43:16 SkyScan SmartMotor 2 response was=2VERSION 100


07:43:16 SkyScan SmartMotor 1 (az) counts/rev=24000
07:43:16 SkyScan SmartMotor 2 (ze) counts/rev=24000
07:43:16 SkyScan initialization result=0
07:43:16 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
07:43:16 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
07:43:16 FLIList err=0  nWheels=1
07:43:16 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
07:43:16 FLIOpen err=0  dev=0
07:43:16 FLIGetHWRevision err=0  hwRev=0
07:43:16 FLIGetFWRevision err=0  fwRev=32768
07:43:16 FLIGetFilterCount err=0  nFilters=6
07:43:16 FLIGetFilterPos err=0  currentPosition=-1
07:43:16 FLIGetStepsRemaining err=0  RemainingSteps=0
07:43:16 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
07:43:16 FLIFreeList err=0
07:43:16 Observatory log will be written every 1200000 msec
07:43:18 Received message from Master: op=Identify serial=111
07:43:20 * END OF LOG *