09:59:48 Starting Observatory v1.63  12/8/14
09:59:48 Startup delay was 5 sec
09:59:48 Process ID=3272  UTC is 2018-4-7  09:59:48.312; local time is 2018-4-7  09:59:48.312 Coordinated Universal Time (diff=0 min)
09:59:48 High-resolution performance counter is available; frequency is 2194.510000 MHz
09:59:48 Master has allocated shared memory
09:59:48 Reading parameter file ObservatoryControlFile.txt
09:59:48 Apparatus is type 2 (Alaska)
09:59:48 Detailed log 0
09:59:48 Pointing head type specified by Observatory control file is SkyScan
09:59:48 SkyScan model specified by Observatory control file is 0
09:59:48 Pointing head communications specified by Observatory control file via COM1
09:59:48 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
09:59:48 Corrections added to script-specified directions are az=-4.000000, ze=6.500000
09:59:48 High-resolution performance counter has been disabled by Observatory control file
09:59:48 Filter type is 4
09:59:48 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
09:59:48   LASER           220            yes O 
09:59:48 Driver init  Result=78
09:59:48 Board name=""
09:59:48 Board entry="No Open Layers boards installed"
09:59:48 Board status=0
09:59:48 Get version result=0   SDK version is "V6.2.1.0"
09:59:48 Get driver version result=39   Version is "[unknown]"
09:59:48 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
09:59:48 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
09:59:48 Digital I/O configure subsystem 0 as input
09:59:48 Set data flow result=40
09:59:48 Configure result=40
09:59:48 Digital I/O configure subsystem 0 as output
09:59:48 Set data flow result=40
09:59:48 Configure result=40
10:00:01 SkyScan init: port=COM1  logFile=Observatory_20180407095948.txt  detail=0
10:00:01 Init port COM1
10:00:01 Successful CreateFile
10:00:01 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
10:00:01 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
10:00:01 SkyScan port init result=0
10:00:01 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
10:00:02 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
10:00:02 SkyScan SmartMotor 1 sw rev=25
10:00:02 SkyScan SmartMotor 2 sw rev=2
10:00:02 SkyScan SmartMotor 2 response was=2VERSION 100


10:00:02 SkyScan SmartMotor 1 (az) counts/rev=24000
10:00:02 SkyScan SmartMotor 2 (ze) counts/rev=24000
10:00:02 SkyScan initialization result=0
10:00:02 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
10:00:02 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
10:00:02 FLIList err=0  nWheels=1
10:00:02 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
10:00:02 FLIOpen err=0  dev=0
10:00:02 FLIGetHWRevision err=0  hwRev=0
10:00:02 FLIGetFWRevision err=0  fwRev=32768
10:00:02 FLIGetFilterCount err=0  nFilters=6
10:00:02 FLIGetFilterPos err=0  currentPosition=-1
10:00:02 FLIGetStepsRemaining err=0  RemainingSteps=0
10:00:02 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
10:00:02 FLIFreeList err=0
10:00:02 Observatory log will be written every 1200000 msec
10:00:02 Received message from Master: op=Identify serial=111
10:00:04 * END OF LOG *