00:50:31 Starting Observatory v1.63  12/8/14
00:50:31 Startup delay was 5 sec
00:50:31 Process ID=2960  UTC is 2018-4-7  00:50:31.675; local time is 2018-4-7  00:50:31.675 Coordinated Universal Time (diff=0 min)
00:50:31 High-resolution performance counter is available; frequency is 2194.510000 MHz
00:50:31 Master has allocated shared memory
00:50:31 Reading parameter file ObservatoryControlFile.txt
00:50:31 Apparatus is type 2 (Alaska)
00:50:31 Detailed log 0
00:50:31 Pointing head type specified by Observatory control file is SkyScan
00:50:31 SkyScan model specified by Observatory control file is 0
00:50:31 Pointing head communications specified by Observatory control file via COM1
00:50:31 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
00:50:31 Corrections added to script-specified directions are az=-4.000000, ze=6.500000
00:50:31 High-resolution performance counter has been disabled by Observatory control file
00:50:31 Filter type is 4
00:50:31 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
00:50:31   LASER           220            yes C 
00:50:31 Driver init  Result=78
00:50:31 Board name=""
00:50:31 Board entry="No Open Layers boards installed"
00:50:31 Board status=0
00:50:31 Get version result=0   SDK version is "V6.2.1.0"
00:50:31 Get driver version result=39   Version is "[unknown]"
00:50:31 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
00:50:31 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
00:50:31 Digital I/O configure subsystem 0 as input
00:50:31 Set data flow result=40
00:50:31 Configure result=40
00:50:31 Digital I/O configure subsystem 0 as output
00:50:31 Set data flow result=40
00:50:31 Configure result=40
00:50:40 SkyScan init: port=COM1  logFile=Observatory_20180407005031.txt  detail=0
00:50:40 Init port COM1
00:50:40 Successful CreateFile
00:50:40 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
00:50:40 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
00:50:40 SkyScan port init result=0
00:50:40 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
00:50:41 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
00:50:41 SkyScan SmartMotor 1 sw rev=25
00:50:41 SkyScan SmartMotor 2 sw rev=2
00:50:41 SkyScan SmartMotor 2 response was=2VERSION 100


00:50:41 SkyScan SmartMotor 1 (az) counts/rev=24000
00:50:41 SkyScan SmartMotor 2 (ze) counts/rev=24000
00:50:41 SkyScan initialization result=0
00:50:41 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
00:50:41 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
00:50:41 FLIList err=0  nWheels=1
00:50:41 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
00:50:41 FLIOpen err=0  dev=0
00:50:41 FLIGetHWRevision err=0  hwRev=0
00:50:41 FLIGetFWRevision err=0  fwRev=32768
00:50:41 FLIGetFilterCount err=0  nFilters=6
00:50:41 FLIGetFilterPos err=0  currentPosition=-1
00:50:41 FLIGetStepsRemaining err=0  RemainingSteps=0
00:50:41 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
00:50:41 FLIFreeList err=0
00:50:41 Observatory log will be written every 1200000 msec
00:50:41 Received message from Master: op=Identify serial=111
00:50:43 * END OF LOG *