04:33:36 Starting Observatory v1.63  12/8/14
04:33:36 Startup delay was 0 sec
04:33:36 Process ID=616  UTC is 2018-4-5  04:33:36.430; local time is 2018-4-5  04:33:36.430 Coordinated Universal Time (diff=0 min)
04:33:36 High-resolution performance counter is available; frequency is 2194.510000 MHz
04:33:36 Master has allocated shared memory
04:33:36 Reading parameter file ObservatoryControlFile.txt
04:33:36 Apparatus is type 2 (Alaska)
04:33:36 Detailed log 0
04:33:36 Pointing head type specified by Observatory control file is SkyScan
04:33:36 SkyScan model specified by Observatory control file is 0
04:33:36 Pointing head communications specified by Observatory control file via COM1
04:33:36 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
04:33:36 Corrections added to script-specified directions are az=-4.000000, ze=6.500000
04:33:36 High-resolution performance counter has been disabled by Observatory control file
04:33:36 Filter type is 4
04:33:36 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
04:33:36   LASER           220            yes O 
04:33:36 Driver init  Result=78
04:33:36 Board name=""
04:33:36 Board entry="No Open Layers boards installed"
04:33:36 Board status=0
04:33:36 Get version result=0   SDK version is "V6.2.1.0"
04:33:36 Get driver version result=39   Version is "[unknown]"
04:33:36 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
04:33:36 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
04:33:36 Digital I/O configure subsystem 0 as input
04:33:36 Set data flow result=40
04:33:36 Configure result=40
04:33:36 Digital I/O configure subsystem 0 as output
04:33:36 Set data flow result=40
04:33:36 Configure result=40
04:33:37 SkyScan init: port=COM1  logFile=Observatory_20180405043336.txt  detail=0
04:33:37 Init port COM1
04:33:37 Successful CreateFile
04:33:37 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
04:33:37 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
04:33:37 SkyScan port init result=0
04:33:38 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
04:33:38 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
04:33:38 SkyScan SmartMotor 1 sw rev=25
04:33:38 SkyScan SmartMotor 2 sw rev=2
04:33:38 SkyScan SmartMotor 2 response was=2VERSION 100


04:33:38 SkyScan SmartMotor 1 (az) counts/rev=24000
04:33:38 SkyScan SmartMotor 2 (ze) counts/rev=24000
04:33:38 SkyScan initialization result=0
04:33:38 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
04:33:38 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
04:33:38 FLIList err=0  nWheels=1
04:33:38 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
04:33:38 FLIOpen err=0  dev=0
04:33:38 FLIGetHWRevision err=0  hwRev=0
04:33:38 FLIGetFWRevision err=0  fwRev=32768
04:33:38 FLIGetFilterCount err=0  nFilters=6
04:33:38 FLIGetFilterPos err=0  currentPosition=-1
04:33:38 FLIGetStepsRemaining err=0  RemainingSteps=0
04:33:38 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
04:33:38 FLIFreeList err=0
04:33:38 Observatory log will be written every 1200000 msec
04:33:38 Received message from Master: op=Identify serial=111
04:33:44 Received message from Master: op=SetupFPI serial=115
04:33:44 SkyScan home
04:33:44 SkyScan home: resp=1
04:34:14 SkyScan home response=10000
04:34:14 Received message from Master: op=State serial=116
04:34:14 GetSingleValue result=40  Value=cccccccc
04:34:14 SkyScan query
04:34:15 SkyScan query done: ret=0  az=0<--14612  ze=64.5<-7700  Statuses=0009 0008
04:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:15 Parameters OK
04:34:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:15 Set A/D data flow result=40
04:34:15 Set A/D channel type result=40
04:34:15 Set A/D encoding result=40
04:34:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:15 Set channel filter=0.000000e+000  result=40
04:34:15 Config A/D  Result=40
04:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:15 Get A/D filter: -9.255963e+061  result=40
04:34:15 Get A/D value=-858993460  result=40
04:34:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:15 Parameters OK
04:34:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:15 Set A/D data flow result=40
04:34:15 Set A/D channel type result=40
04:34:15 Set A/D encoding result=40
04:34:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:15 Set channel filter=0.000000e+000  result=40
04:34:15 Config A/D  Result=40
04:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:15 Get A/D filter: -9.255963e+061  result=40
04:34:15 Get A/D value=-858993460  result=40
04:34:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:15 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=64.500000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
04:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:34:15 Aux=
04:34:15 Message to Master, serial 116 queued
04:34:15 Received message from Master: op=State serial=117
04:34:15 GetSingleValue result=40  Value=cccccccc
04:34:15 SkyScan query
04:34:15 SkyScan query done: ret=0  az=0<--14683  ze=64.5<-7700  Statuses=0009 0008
04:34:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:15 Parameters OK
04:34:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:15 Set A/D data flow result=40
04:34:15 Set A/D channel type result=40
04:34:15 Set A/D encoding result=40
04:34:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:15 Set channel filter=0.000000e+000  result=40
04:34:15 Config A/D  Result=40
04:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:15 Get A/D filter: -9.255963e+061  result=40
04:34:15 Get A/D value=-858993460  result=40
04:34:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:15 Parameters OK
04:34:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:15 Set A/D data flow result=40
04:34:15 Set A/D channel type result=40
04:34:15 Set A/D encoding result=40
04:34:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:15 Set channel filter=0.000000e+000  result=40
04:34:15 Config A/D  Result=40
04:34:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:15 Get A/D filter: -9.255963e+061  result=40
04:34:15 Get A/D value=-858993460  result=40
04:34:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:15 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=64.500000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
04:34:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:34:15 Aux=
04:34:15 Message to Master, serial 117 queued
04:35:00 Received message from Master: op=PointingHead serial=118
04:35:00 Move0 PH to az=2.600000e+001 (2.200000e+001)  zen=9.000000e+001 (9.650000e+001)
04:35:00 SkyScan point: az=22->1467  ze=96.5->5567  Resp=0
04:35:01 Point started: ret=0
04:35:01 point_skyscan result=0
04:35:01 Check angles
04:35:01 SkyScan query
04:35:02 SkyScan query done: ret=0  az=70.095<-4673  ze=94.035<-5731  Statuses=0004 0009
04:35:02 Msec=0  True Az=70.095  Ze=94.035  Az status=0004  Ze status=0009
04:35:02 Check angles
04:35:02 SkyScan query
04:35:03 SkyScan query done: ret=0  az=52.245<-3483  ze=96.525<-5565  Statuses=0009 0008
04:35:03 Msec=750  True Az=52.245  Ze=96.525  Az status=0009  Ze status=0008
04:35:03 Check angles
04:35:03 SkyScan query
04:35:03 SkyScan query done: ret=0  az=34.8<-2320  ze=96.495<-5567  Statuses=0009 0008
04:35:03 Msec=1500  True Az=34.8  Ze=96.495  Az status=0009  Ze status=0008
04:35:04 Check angles
04:35:04 SkyScan query
04:35:04 SkyScan query done: ret=0  az=22.02<-1468  ze=96.495<-5567  Statuses=0009 0008
04:35:04 Msec=2250  True Az=22.02  Ze=96.495  Az status=0009  Ze status=0008
04:35:04 Check angles
04:35:04 SkyScan query
04:35:05 SkyScan query done: ret=0  az=21.975<-1465  ze=96.495<-5567  Statuses=0008 0008
04:35:05 Msec=3000  True Az=21.975  Ze=96.495  Az status=0008  Ze status=0008
04:35:05 Message to Master queued w/err=0: serial=118 error=0
04:36:25 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=1.790000e+002 (1.855000e+002)
04:36:25 SkyScan point: az=106->7067  ze=185.5->0  Resp=0
04:36:25 Point started: ret=0
04:36:25 point_skyscan result=0
04:36:26 Check angles
04:36:26 SkyScan query
04:36:27 SkyScan query done: ret=0  az=44.73<-2982  ze=126.045<-3597  Statuses=0009 0009
04:36:27 Msec=0  True Az=44.73  Ze=126.045  Az status=0009  Ze status=0009
04:36:27 Check angles
04:36:27 SkyScan query
04:36:27 SkyScan query done: ret=0  az=62.385<-4159  ze=147<-2200  Statuses=0009 0009
04:36:27 Msec=750  True Az=62.385  Ze=147  Az status=0009  Ze status=0009
04:36:27 Check angles
04:36:27 SkyScan query
04:36:28 SkyScan query done: ret=0  az=79.755<-5317  ze=167.94<-804  Statuses=0009 0009
04:36:28 Msec=1500  True Az=79.755  Ze=167.94  Az status=0009  Ze status=0009
04:36:28 Check angles
04:36:28 SkyScan query
04:36:29 SkyScan query done: ret=0  az=97.47<-6498  ze=-179.955<-23997  Statuses=0009 0008
04:36:29 Msec=2250  True Az=97.47  Ze=-179.955  Az status=0009  Ze status=0008
04:36:29 Check angles
04:36:29 SkyScan query
04:36:30 SkyScan query done: ret=0  az=106.05<-7070  ze=-179.985<-23999  Statuses=0008 0008
04:36:30 Msec=3000  True Az=106.05  Ze=-179.985  Az status=0008  Ze status=0008
04:36:59 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=1.740000e+002 (1.805000e+002)
04:36:59 SkyScan point: az=106->7067  ze=180.5->0  Resp=0
04:37:00 Point started: ret=0
04:37:00 point_skyscan result=0
04:37:01 Check angles
04:37:01 SkyScan query
04:37:01 SkyScan query done: ret=0  az=106.005<-7067  ze=180<-0  Statuses=0008 0008
04:37:01 Msec=0  True Az=106.005  Ze=180  Az status=0008  Ze status=0008
04:37:27 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=1.000000e+002 (1.065000e+002)
04:37:27 SkyScan point: az=106->7067  ze=106.5->4900  Resp=0
04:37:27 Point started: ret=0
04:37:27 point_skyscan result=0
04:37:28 Check angles
04:37:28 SkyScan query
04:37:29 SkyScan query done: ret=0  az=106.005<-7067  ze=150.195<-1987  Statuses=0008 0009
04:37:29 Msec=0  True Az=106.005  Ze=150.195  Az status=0008  Ze status=0009
04:37:29 Check angles
04:37:29 SkyScan query
04:37:30 SkyScan query done: ret=0  az=106.005<-7067  ze=129.255<-3383  Statuses=0008 0009
04:37:30 Msec=750  True Az=106.005  Ze=129.255  Az status=0008  Ze status=0009
04:37:30 Check angles
04:37:30 SkyScan query
04:37:30 SkyScan query done: ret=0  az=106.005<-7067  ze=108.12<-4792  Statuses=0008 0009
04:37:30 Msec=1500  True Az=106.005  Ze=108.12  Az status=0008  Ze status=0009
04:37:31 Check angles
04:37:31 SkyScan query
04:37:31 SkyScan query done: ret=0  az=106.005<-7067  ze=106.485<-4901  Statuses=0008 0008
04:37:31 Msec=2250  True Az=106.005  Ze=106.485  Az status=0008  Ze status=0008
04:37:43 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=1.740000e+002 (1.805000e+002)
04:37:43 SkyScan point: az=106->7067  ze=180.5->0  Resp=0
04:37:43 Point started: ret=0
04:37:43 point_skyscan result=0
04:37:44 Check angles
04:37:44 SkyScan query
04:37:44 SkyScan query done: ret=0  az=106.005<-7067  ze=136.605<-2893  Statuses=0008 0009
04:37:44 Msec=0  True Az=106.005  Ze=136.605  Az status=0008  Ze status=0009
04:37:44 Check angles
04:37:44 SkyScan query
04:37:45 SkyScan query done: ret=0  az=106.005<-7067  ze=157.995<-1467  Statuses=0008 0009
04:37:45 Msec=750  True Az=106.005  Ze=157.995  Az status=0008  Ze status=0009
04:37:45 Check angles
04:37:45 SkyScan query
04:37:46 SkyScan query done: ret=0  az=106.005<-7067  ze=178.62<-92  Statuses=0008 0009
04:37:46 Msec=1500  True Az=106.005  Ze=178.62  Az status=0008  Ze status=0009
04:37:46 Check angles
04:37:46 SkyScan query
04:37:47 SkyScan query done: ret=0  az=106.005<-7067  ze=-179.985<-23999  Statuses=0008 0008
04:37:47 Msec=2250  True Az=106.005  Ze=-179.985  Az status=0008  Ze status=0008
04:38:02 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=-1.740000e+002 (-1.675000e+002)
04:38:02 SkyScan point: az=106->7067  ze=-167.5->23167  Resp=0
04:38:02 Point started: ret=0
04:38:02 point_skyscan result=0
04:38:03 Check angles
04:38:03 SkyScan query
04:38:03 SkyScan query done: ret=0  az=106.005<-7067  ze=-167.49<-23166  Statuses=0008 0008
04:38:03 Msec=0  True Az=106.005  Ze=-167.49  Az status=0008  Ze status=0008
04:38:17 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=-1.780000e+002 (-1.715000e+002)
04:38:17 SkyScan point: az=106->7067  ze=-171.5->23433  Resp=0
04:38:18 Point started: ret=0
04:38:18 point_skyscan result=0
04:38:18 Check angles
04:38:18 SkyScan query
04:38:19 SkyScan query done: ret=0  az=106.005<-7067  ze=-171.51<-23434  Statuses=0008 0008
04:38:19 Msec=0  True Az=106.005  Ze=-171.51  Az status=0008  Ze status=0008
04:38:31 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=-1.790000e+002 (-1.725000e+002)
04:38:31 SkyScan point: az=106->7067  ze=-172.5->23500  Resp=0
04:38:31 Point started: ret=0
04:38:31 point_skyscan result=0
04:38:32 Check angles
04:38:32 SkyScan query
04:38:32 SkyScan query done: ret=0  az=106.005<-7067  ze=-172.5<-23500  Statuses=0008 0008
04:38:32 Msec=0  True Az=106.005  Ze=-172.5  Az status=0008  Ze status=0008
04:38:41 Move1 PH to az=1.100000e+002 (1.060000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:38:41 SkyScan point: az=106->7067  ze=-173->23533  Resp=0
04:38:42 Point started: ret=0
04:38:42 point_skyscan result=0
04:38:42 Check angles
04:38:42 SkyScan query
04:38:43 SkyScan query done: ret=0  az=106.005<-7067  ze=-172.995<-23533  Statuses=0008 0008
04:38:43 Msec=0  True Az=106.005  Ze=-172.995  Az status=0008  Ze status=0008
04:38:54 Move1 PH to az=1.150000e+002 (1.110000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:38:54 SkyScan point: az=111->7400  ze=-173->23533  Resp=0
04:38:54 Point started: ret=0
04:38:54 point_skyscan result=0
04:38:55 Check angles
04:38:55 SkyScan query
04:38:56 SkyScan query done: ret=0  az=111<-7400  ze=-172.995<-23533  Statuses=0008 0008
04:38:56 Msec=0  True Az=111  Ze=-172.995  Az status=0008  Ze status=0008
04:39:01 Move1 PH to az=1.200000e+002 (1.160000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:39:01 SkyScan point: az=116->7733  ze=-173->23533  Resp=0
04:39:01 Point started: ret=0
04:39:01 point_skyscan result=0
04:39:02 Check angles
04:39:02 SkyScan query
04:39:03 SkyScan query done: ret=0  az=115.995<-7733  ze=-172.995<-23533  Statuses=0008 0008
04:39:03 Msec=0  True Az=115.995  Ze=-172.995  Az status=0008  Ze status=0008
04:39:13 Move1 PH to az=1.180000e+002 (1.140000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:39:13 SkyScan point: az=114->7600  ze=-173->23533  Resp=0
04:39:14 Point started: ret=0
04:39:14 point_skyscan result=0
04:39:14 Check angles
04:39:14 SkyScan query
04:39:15 SkyScan query done: ret=0  az=114<-7600  ze=-172.995<-23533  Statuses=0008 0008
04:39:15 Msec=0  True Az=114  Ze=-172.995  Az status=0008  Ze status=0008
04:39:21 * END OF LOG *