03:47:01 Starting Observatory v1.63 12/8/14 03:47:01 Startup delay was 0 sec 03:47:01 Process ID=3348 UTC is 2018-4-5 03:47:01.789; local time is 2018-4-5 03:47:01.789 Coordinated Universal Time (diff=0 min) 03:47:01 High-resolution performance counter is available; frequency is 2194.510000 MHz 03:47:01 Master has allocated shared memory 03:47:01 Reading parameter file ObservatoryControlFile.txt 03:47:01 Apparatus is type 2 (Alaska) 03:47:01 Detailed log 0 03:47:01 Pointing head type specified by Observatory control file is SkyScan 03:47:01 SkyScan model specified by Observatory control file is 0 03:47:01 Pointing head communications specified by Observatory control file via COM1 03:47:01 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E ht=200.000000 m 03:47:01 Corrections added to script-specified directions are az=-4.000000, ze=6.500000 03:47:01 High-resolution performance counter has been disabled by Observatory control file 03:47:01 Filter type is 4 03:47:01 Name Serial number Ry# Available? State pRelay 1/0 USB shutters/relays specified 03:47:01 LASER 220 yes O 03:47:01 Driver init Result=78 03:47:01 Board name="" 03:47:01 Board entry="No Open Layers boards installed" 03:47:01 Board status=0 03:47:01 Get version result=0 SDK version is "V6.2.1.0" 03:47:01 Get driver version result=39 Version is "[unknown]" 03:47:01 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0 03:47:01 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type 03:47:01 Digital I/O configure subsystem 0 as input 03:47:01 Set data flow result=40 03:47:01 Configure result=40 03:47:01 Digital I/O configure subsystem 0 as output 03:47:01 Set data flow result=40 03:47:01 Configure result=40 03:47:03 SkyScan init: port=COM1 logFile=Observatory_20180405034701.txt detail=0 03:47:03 Init port COM1 03:47:03 Successful CreateFile 03:47:03 SetPortParameters: baud=9600 size=8 parity=0 stop=0 charTime=1042 usec 03:47:03 Successful SetCommTimeouts ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20 ReadTotalTimeoutConstant=10 03:47:03 SkyScan port init result=0 03:47:03 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C " 03:47:03 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C " 03:47:03 SkyScan SmartMotor 1 sw rev=25 03:47:03 SkyScan SmartMotor 2 sw rev=2 03:47:03 SkyScan SmartMotor 2 response was=2VERSION 100 03:47:03 SkyScan SmartMotor 1 (az) counts/rev=24000 03:47:03 SkyScan SmartMotor 2 (ze) counts/rev=24000 03:47:03 SkyScan initialization result=0 03:47:03 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt Level=7 03:47:03 FLIGetLibVersion err=0 Lib vn=Software Development Library for Windows 1.104 03:47:03 FLIList err=0 nWheels=1 03:47:03 Wheel 0 filename="flifil0" modelName="CFW-6-6" 03:47:03 FLIOpen err=0 dev=0 03:47:03 FLIGetHWRevision err=0 hwRev=0 03:47:03 FLIGetFWRevision err=0 fwRev=32768 03:47:03 FLIGetFilterCount err=0 nFilters=6 03:47:03 FLIGetFilterPos err=0 currentPosition=-1 03:47:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:03 FilterWheelPositionGet err=0 currentPosition=-1 remaining steps=0 03:47:03 FLIFreeList err=0 03:47:03 Observatory log will be written every 1200000 msec 03:47:03 Received message from Master: op=Identify serial=111 03:47:07 Received message from Master: op=SetupFPI serial=115 03:47:07 SkyScan home 03:47:07 SkyScan home: resp=1 03:47:37 SkyScan home response=10000 03:47:37 Received message from Master: op=State serial=116 03:47:37 GetSingleValue result=40 Value=cccccccc 03:47:37 SkyScan query 03:47:37 SkyScan query done: ret=0 az=0<--14857 ze=96<-5600 Statuses=0009 0008 03:47:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:37 Parameters OK 03:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:37 Set A/D data flow result=40 03:47:37 Set A/D channel type result=40 03:47:37 Set A/D encoding result=40 03:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:37 Set channel filter=0.000000e+000 result=40 03:47:37 Config A/D Result=40 03:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:37 Get A/D filter: -9.255963e+061 result=40 03:47:37 Get A/D value=-858993460 result=40 03:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:37 Parameters OK 03:47:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:37 Set A/D data flow result=40 03:47:37 Set A/D channel type result=40 03:47:37 Set A/D encoding result=40 03:47:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:37 Set channel filter=0.000000e+000 result=40 03:47:37 Config A/D Result=40 03:47:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:37 Get A/D filter: -9.255963e+061 result=40 03:47:37 Get A/D value=-858993460 result=40 03:47:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:37 PH type=1 Digital in=000000 Instrument Az=0.000000 deg Ze=96.000000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=09 08 03:47:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:37 Aux= 03:47:37 Message to Master, serial 116 queued 03:47:38 Received message from Master: op=State serial=117 03:47:38 GetSingleValue result=40 Value=cccccccc 03:47:38 SkyScan query 03:47:38 SkyScan query done: ret=0 az=0<--13794 ze=96<-5600 Statuses=0009 0008 03:47:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:38 Parameters OK 03:47:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:38 Set A/D data flow result=40 03:47:38 Set A/D channel type result=40 03:47:38 Set A/D encoding result=40 03:47:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:38 Set channel filter=0.000000e+000 result=40 03:47:38 Config A/D Result=40 03:47:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:38 Get A/D filter: -9.255963e+061 result=40 03:47:38 Get A/D value=-858993460 result=40 03:47:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:38 Parameters OK 03:47:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:38 Set A/D data flow result=40 03:47:38 Set A/D channel type result=40 03:47:38 Set A/D encoding result=40 03:47:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:38 Set channel filter=0.000000e+000 result=40 03:47:38 Config A/D Result=40 03:47:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:38 Get A/D filter: -9.255963e+061 result=40 03:47:38 Get A/D value=-858993460 result=40 03:47:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:38 PH type=1 Digital in=000000 Instrument Az=0.000000 deg Ze=96.000000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=09 08 03:47:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:38 Aux= 03:47:38 Message to Master, serial 117 queued 03:48:23 Received message from Master: op=PointingHead serial=118 03:48:23 Move0 PH to az=2.600000e+001 (2.200000e+001) zen=9.000000e+001 (9.650000e+001) 03:48:23 SkyScan point: az=22->1467 ze=96.5->5567 Resp=0 03:48:23 Point started: ret=0 03:48:23 point_skyscan result=0 03:48:24 Check angles 03:48:24 SkyScan query 03:48:25 SkyScan query done: ret=0 az=70.275<-4685 ze=96.495<-5567 Statuses=0004 0008 03:48:25 Msec=0 True Az=70.275 Ze=96.495 Az status=0004 Ze status=0008 03:48:25 Message to Master queued w/err=0: serial=118 error=0 03:49:23 Move1 PH to az=2.600000e+001 (2.200000e+001) zen=-9.000000e+001 (-8.350000e+001) 03:49:23 SkyScan point: az=22->1467 ze=-83.5->17567 Resp=0 03:49:24 Point started: ret=0 03:49:24 point_skyscan result=0 03:49:24 Check angles 03:49:24 SkyScan query 03:49:25 SkyScan query done: ret=0 az=22.005<-1467 ze=66.315<-7579 Statuses=0008 0009 03:49:25 Msec=0 True Az=22.005 Ze=66.315 Az status=0008 Ze status=0009 03:49:25 Check angles 03:49:25 SkyScan query 03:49:26 SkyScan query done: ret=0 az=22.005<-1467 ze=45.345<-8977 Statuses=0008 0009 03:49:26 Msec=750 True Az=22.005 Ze=45.345 Az status=0008 Ze status=0009 03:49:26 Check angles 03:49:26 SkyScan query 03:49:26 SkyScan query done: ret=0 az=22.005<-1467 ze=24.405<-10373 Statuses=0008 0009 03:49:26 Msec=1500 True Az=22.005 Ze=24.405 Az status=0008 Ze status=0009 03:49:27 Check angles 03:49:27 SkyScan query 03:49:27 SkyScan query done: ret=0 az=22.005<-1467 ze=3.435<-11771 Statuses=0008 0009 03:49:27 Msec=2250 True Az=22.005 Ze=3.435 Az status=0008 Ze status=0009 03:49:27 Check angles 03:49:27 SkyScan query 03:49:28 SkyScan query done: ret=0 az=22.005<-1467 ze=-17.505<-13167 Statuses=0008 0009 03:49:28 Msec=3000 True Az=22.005 Ze=-17.505 Az status=0008 Ze status=0009 03:49:28 Check angles 03:49:28 SkyScan query 03:49:29 SkyScan query done: ret=0 az=22.005<-1467 ze=-38.43<-14562 Statuses=0008 0009 03:49:29 Msec=3750 True Az=22.005 Ze=-38.43 Az status=0008 Ze status=0009 03:49:29 Check angles 03:49:29 SkyScan query 03:49:29 SkyScan query done: ret=0 az=22.005<-1467 ze=-59.43<-15962 Statuses=0008 0009 03:49:29 Msec=4500 True Az=22.005 Ze=-59.43 Az status=0008 Ze status=0009 03:49:30 Check angles 03:49:30 SkyScan query 03:49:30 SkyScan query done: ret=0 az=22.005<-1467 ze=-80.4<-17360 Statuses=0008 0009 03:49:30 Msec=5250 True Az=22.005 Ze=-80.4 Az status=0008 Ze status=0009 03:49:30 Check angles 03:49:30 SkyScan query 03:49:31 SkyScan query done: ret=0 az=22.005<-1467 ze=-83.55<-17570 Statuses=0008 0008 03:49:31 Msec=6000 True Az=22.005 Ze=-83.55 Az status=0008 Ze status=0008 03:51:08 Move1 PH to az=1.600000e+002 (1.560000e+002) zen=5.800000e+001 (6.450000e+001) 03:51:08 SkyScan point: az=156->10400 ze=64.5->7700 Resp=0 03:51:08 Point started: ret=0 03:51:08 point_skyscan result=0 03:51:09 Check angles 03:51:09 SkyScan query 03:51:09 SkyScan query done: ret=0 az=45.48<-3032 ze=-53.325<-15555 Statuses=0009 0009 03:51:09 Msec=0 True Az=45.48 Ze=-53.325 Az status=0009 Ze status=0009 03:51:10 Check angles 03:51:10 SkyScan query 03:51:10 SkyScan query done: ret=0 az=62.91<-4194 ze=-32.37<-14158 Statuses=0009 0009 03:51:10 Msec=750 True Az=62.91 Ze=-32.37 Az status=0009 Ze status=0009 03:51:10 Check angles 03:51:10 SkyScan query 03:51:11 SkyScan query done: ret=0 az=80.325<-5355 ze=-11.415<-12761 Statuses=0009 0009 03:51:11 Msec=1500 True Az=80.325 Ze=-11.415 Az status=0009 Ze status=0009 03:51:11 Check angles 03:51:11 SkyScan query 03:51:12 SkyScan query done: ret=0 az=97.725<-6515 ze=9.525<-11365 Statuses=0009 0009 03:51:12 Msec=2250 True Az=97.725 Ze=9.525 Az status=0009 Ze status=0009 03:51:12 Check angles 03:51:12 SkyScan query 03:51:12 SkyScan query done: ret=0 az=115.605<-7707 ze=30.93<-9938 Statuses=0009 0009 03:51:12 Msec=3000 True Az=115.605 Ze=30.93 Az status=0009 Ze status=0009 03:51:13 Check angles 03:51:13 SkyScan query 03:51:13 SkyScan query done: ret=0 az=133.05<-8870 ze=51.885<-8541 Statuses=0009 0009 03:51:13 Msec=3750 True Az=133.05 Ze=51.885 Az status=0009 Ze status=0009 03:51:13 Check angles 03:51:13 SkyScan query 03:51:14 SkyScan query done: ret=0 az=150.615<-10041 ze=64.56<-7696 Statuses=0009 0008 03:51:14 Msec=4500 True Az=150.615 Ze=64.56 Az status=0009 Ze status=0008 03:51:14 Check angles 03:51:14 SkyScan query 03:51:15 SkyScan query done: ret=0 az=156.015<-10401 ze=64.515<-7699 Statuses=0008 0008 03:51:15 Msec=5250 True Az=156.015 Ze=64.515 Az status=0008 Ze status=0008 03:51:39 Move1 PH to az=1.600000e+002 (1.560000e+002) zen=8.500000e+001 (9.150000e+001) 03:51:39 SkyScan point: az=156->10400 ze=91.5->5900 Resp=0 03:51:39 Point started: ret=0 03:51:39 point_skyscan result=0 03:51:40 Check angles 03:51:40 SkyScan query 03:51:40 SkyScan query done: ret=0 az=156<-10400 ze=91.56<-5896 Statuses=0008 0009 03:51:40 Msec=0 True Az=156 Ze=91.56 Az status=0008 Ze status=0009 03:51:41 Check angles 03:51:41 SkyScan query 03:51:41 SkyScan query done: ret=0 az=156<-10400 ze=91.515<-5899 Statuses=0008 0008 03:51:41 Msec=750 True Az=156 Ze=91.515 Az status=0008 Ze status=0008 03:51:47 Move1 PH to az=1.600000e+002 (1.560000e+002) zen=8.100000e+001 (8.750000e+001) 03:51:47 SkyScan point: az=156->10400 ze=87.5->6167 Resp=0 03:51:48 Point started: ret=0 03:51:48 point_skyscan result=0 03:51:48 Check angles 03:51:48 SkyScan query 03:51:49 SkyScan query done: ret=0 az=156<-10400 ze=87.495<-6167 Statuses=0008 0008 03:51:49 Msec=0 True Az=156 Ze=87.495 Az status=0008 Ze status=0008 03:51:54 Move1 PH to az=1.600000e+002 (1.560000e+002) zen=8.200000e+001 (8.850000e+001) 03:51:54 SkyScan point: az=156->10400 ze=88.5->6100 Resp=0 03:51:54 Point started: ret=0 03:51:54 point_skyscan result=0 03:51:55 Check angles 03:51:55 SkyScan query 03:51:56 SkyScan query done: ret=0 az=156<-10400 ze=88.5<-6100 Statuses=0008 0008 03:51:56 Msec=0 True Az=156 Ze=88.5 Az status=0008 Ze status=0008 03:52:02 Move1 PH to az=1.600000e+002 (1.560000e+002) zen=8.300000e+001 (8.950000e+001) 03:52:02 SkyScan point: az=156->10400 ze=89.5->6033 Resp=0 03:52:03 Point started: ret=0 03:52:03 point_skyscan result=0 03:52:03 Check angles 03:52:03 SkyScan query 03:52:04 SkyScan query done: ret=0 az=156<-10400 ze=89.505<-6033 Statuses=0008 0008 03:52:04 Msec=0 True Az=156 Ze=89.505 Az status=0008 Ze status=0008 03:52:27 Move1 PH to az=1.520000e+002 (1.480000e+002) zen=8.300000e+001 (8.950000e+001) 03:52:27 SkyScan point: az=148->9867 ze=89.5->6033 Resp=0 03:52:28 Point started: ret=0 03:52:28 point_skyscan result=0 03:52:29 Check angles 03:52:29 SkyScan query 03:52:29 SkyScan query done: ret=0 az=148.005<-9867 ze=89.505<-6033 Statuses=0008 0008 03:52:29 Msec=0 True Az=148.005 Ze=89.505 Az status=0008 Ze status=0008 03:52:52 Move1 PH to az=1.600000e+002 (1.560000e+002) zen=5.800000e+001 (6.450000e+001) 03:52:52 SkyScan point: az=156->10400 ze=64.5->7700 Resp=0 03:52:52 Point started: ret=0 03:52:52 point_skyscan result=0 03:52:53 Check angles 03:52:53 SkyScan query 03:52:54 SkyScan query done: ret=0 az=156<-10400 ze=64.455<-7703 Statuses=0008 0009 03:52:54 Msec=0 True Az=156 Ze=64.455 Az status=0008 Ze status=0009 03:52:54 Check angles 03:52:54 SkyScan query 03:52:54 SkyScan query done: ret=0 az=156<-10400 ze=64.485<-7701 Statuses=0008 0008 03:52:54 Msec=750 True Az=156 Ze=64.485 Az status=0008 Ze status=0008 03:53:13 * END OF LOG *