03:44:37 Starting Observatory v1.63  12/8/14
03:44:37 Startup delay was 0 sec
03:44:37 Process ID=172  UTC is 2018-4-5  03:44:37.977; local time is 2018-4-5  03:44:37.977 Coordinated Universal Time (diff=0 min)
03:44:37 High-resolution performance counter is available; frequency is 2194.510000 MHz
03:44:37 Master has allocated shared memory
03:44:37 Reading parameter file ObservatoryControlFile.txt
03:44:37 Apparatus is type 2 (Alaska)
03:44:37 Detailed log 0
03:44:37 Pointing head type specified by Observatory control file is SkyScan
03:44:37 SkyScan model specified by Observatory control file is 0
03:44:37 Pointing head communications specified by Observatory control file via COM1
03:44:37 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
03:44:37 Corrections added to script-specified directions are az=-4.000000, ze=6.000000
03:44:37 High-resolution performance counter has been disabled by Observatory control file
03:44:37 Filter type is 4
03:44:37 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
03:44:37   LASER           220            yes O 
03:44:37 Driver init  Result=78
03:44:37 Board name=""
03:44:37 Board entry="No Open Layers boards installed"
03:44:37 Board status=0
03:44:37 Get version result=0   SDK version is "V6.2.1.0"
03:44:37 Get driver version result=39   Version is "[unknown]"
03:44:37 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
03:44:37 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
03:44:37 Digital I/O configure subsystem 0 as input
03:44:37 Set data flow result=40
03:44:37 Configure result=40
03:44:37 Digital I/O configure subsystem 0 as output
03:44:37 Set data flow result=40
03:44:37 Configure result=40
03:44:38 SkyScan init: port=COM1  logFile=Observatory_20180405034437.txt  detail=0
03:44:38 Init port COM1
03:44:38 Successful CreateFile
03:44:38 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
03:44:38 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
03:44:38 SkyScan port init result=0
03:44:39 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
03:44:39 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
03:44:39 SkyScan SmartMotor 1 sw rev=25
03:44:39 SkyScan SmartMotor 2 sw rev=2
03:44:39 SkyScan SmartMotor 2 response was=2VERSION 100


03:44:39 SkyScan SmartMotor 1 (az) counts/rev=24000
03:44:39 SkyScan SmartMotor 2 (ze) counts/rev=24000
03:44:39 SkyScan initialization result=0
03:44:39 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
03:44:39 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
03:44:39 FLIList err=0  nWheels=1
03:44:39 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
03:44:39 FLIOpen err=0  dev=0
03:44:39 FLIGetHWRevision err=0  hwRev=0
03:44:39 FLIGetFWRevision err=0  fwRev=32768
03:44:39 FLIGetFilterCount err=0  nFilters=6
03:44:39 FLIGetFilterPos err=0  currentPosition=-1
03:44:39 FLIGetStepsRemaining err=0  RemainingSteps=0
03:44:39 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
03:44:39 FLIFreeList err=0
03:44:39 Observatory log will be written every 1200000 msec
03:44:39 Received message from Master: op=Identify serial=111
03:44:43 Received message from Master: op=SetupFPI serial=115
03:44:43 SkyScan home
03:44:43 SkyScan home: resp=1
03:45:13 SkyScan home response=10000
03:45:13 Received message from Master: op=State serial=116
03:45:13 GetSingleValue result=40  Value=cccccccc
03:45:13 SkyScan query
03:45:14 SkyScan query done: ret=0  az=162.975<-10865  ze=96<-5600  Statuses=0009 0008
03:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:45:14 Parameters OK
03:45:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:45:14 Set A/D data flow result=40
03:45:14 Set A/D channel type result=40
03:45:14 Set A/D encoding result=40
03:45:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:45:14 Set channel filter=0.000000e+000  result=40
03:45:14 Config A/D  Result=40
03:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:45:14 Get A/D filter: -9.255963e+061  result=40
03:45:14 Get A/D value=-858993460  result=40
03:45:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:45:14 Parameters OK
03:45:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:45:14 Set A/D data flow result=40
03:45:14 Set A/D channel type result=40
03:45:14 Set A/D encoding result=40
03:45:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:45:14 Set channel filter=0.000000e+000  result=40
03:45:14 Config A/D  Result=40
03:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:45:14 Get A/D filter: -9.255963e+061  result=40
03:45:14 Get A/D value=-858993460  result=40
03:45:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:45:14 PH type=1  Digital in=000000  Instrument Az=162.975006 deg  Ze=96.000000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:45:14 Aux=
03:45:14 Message to Master, serial 116 queued
03:45:14 Received message from Master: op=State serial=117
03:45:14 GetSingleValue result=40  Value=cccccccc
03:45:14 SkyScan query
03:45:14 SkyScan query done: ret=0  az=165.69<-11046  ze=96<-5600  Statuses=0009 0008
03:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:45:14 Parameters OK
03:45:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:45:14 Set A/D data flow result=40
03:45:14 Set A/D channel type result=40
03:45:14 Set A/D encoding result=40
03:45:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:45:14 Set channel filter=0.000000e+000  result=40
03:45:14 Config A/D  Result=40
03:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:45:14 Get A/D filter: -9.255963e+061  result=40
03:45:14 Get A/D value=-858993460  result=40
03:45:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:45:14 Parameters OK
03:45:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:45:14 Set A/D data flow result=40
03:45:14 Set A/D channel type result=40
03:45:14 Set A/D encoding result=40
03:45:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:45:14 Set channel filter=0.000000e+000  result=40
03:45:14 Config A/D  Result=40
03:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:45:14 Get A/D filter: -9.255963e+061  result=40
03:45:14 Get A/D value=-858993460  result=40
03:45:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:45:14 PH type=1  Digital in=000000  Instrument Az=165.690002 deg  Ze=96.000000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:45:14 Aux=
03:45:14 Message to Master, serial 117 queued
03:45:59 Received message from Master: op=PointingHead serial=118
03:45:59 Move0 PH to az=2.600000e+001 (2.200000e+001)  zen=9.000000e+001 (9.600000e+001)
03:45:59 SkyScan point: az=22->1467  ze=96->5600  Resp=0
03:46:00 Point started: ret=0
03:46:00 point_skyscan result=0
03:46:01 Check angles
03:46:01 SkyScan query
03:46:01 SkyScan query done: ret=0  az=0<--6007  ze=96<-5600  Statuses=0009 0008
03:46:01 Msec=0  True Az=0  Ze=96  Az status=0009  Ze status=0008
03:46:01 Check angles
03:46:01 SkyScan query
03:46:02 SkyScan query done: ret=0  az=0<--4844  ze=96<-5600  Statuses=0009 0008
03:46:02 Msec=750  True Az=0  Ze=96  Az status=0009  Ze status=0008
03:46:02 Check angles
03:46:02 SkyScan query
03:46:03 SkyScan query done: ret=0  az=0<--3679  ze=96<-5600  Statuses=0009 0008
03:46:03 Msec=1500  True Az=0  Ze=96  Az status=0009  Ze status=0008
03:46:03 Check angles
03:46:03 SkyScan query
03:46:03 SkyScan query done: ret=0  az=0<--2516  ze=96<-5600  Statuses=0009 0008
03:46:03 Msec=2250  True Az=0  Ze=96  Az status=0009  Ze status=0008
03:46:04 Check angles
03:46:04 SkyScan query
03:46:04 SkyScan query done: ret=0  az=0<--1353  ze=96<-5600  Statuses=0009 0008
03:46:04 Msec=3000  True Az=0  Ze=96  Az status=0009  Ze status=0008
03:46:04 Check angles
03:46:04 SkyScan query
03:46:05 SkyScan query done: ret=0  az=0<--182  ze=95.985<-5601  Statuses=0009 0000
03:46:05 Msec=3750  True Az=0  Ze=95.985  Az status=0009  Ze status=0000
03:46:05 Check angles
03:46:05 SkyScan query
03:46:06 SkyScan query done: ret=0  az=0.87<-58  ze=96<-5600  Statuses=0008 0008
03:46:06 Msec=4500  True Az=0.87  Ze=96  Az status=0008  Ze status=0008
03:46:06 Message to Master queued w/err=0: serial=118 error=0
03:46:55 * END OF LOG *