03:20:44 Starting Observatory v1.63  12/8/14
03:20:44 Startup delay was 0 sec
03:20:44 Process ID=1740  UTC is 2018-4-5  03:20:44.961; local time is 2018-4-5  03:20:44.961 Coordinated Universal Time (diff=0 min)
03:20:44 High-resolution performance counter is available; frequency is 2194.510000 MHz
03:20:44 Master has allocated shared memory
03:20:44 Reading parameter file ObservatoryControlFile.txt
03:20:44 Apparatus is type 2 (Alaska)
03:20:44 Detailed log 0
03:20:44 Pointing head type specified by Observatory control file is SkyScan
03:20:44 SkyScan model specified by Observatory control file is 0
03:20:44 Pointing head communications specified by Observatory control file via COM1
03:20:44 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
03:20:44 Corrections added to script-specified directions are az=-4.000000, ze=0.000000
03:20:44 High-resolution performance counter has been disabled by Observatory control file
03:20:44 Filter type is 4
03:20:44 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
03:20:44   LASER           220            yes O 
03:20:44 Driver init  Result=78
03:20:44 Board name=""
03:20:44 Board entry="No Open Layers boards installed"
03:20:44 Board status=0
03:20:44 Get version result=0   SDK version is "V6.2.1.0"
03:20:44 Get driver version result=39   Version is "[unknown]"
03:20:44 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
03:20:44 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
03:20:44 Digital I/O configure subsystem 0 as input
03:20:44 Set data flow result=40
03:20:44 Configure result=40
03:20:44 Digital I/O configure subsystem 0 as output
03:20:44 Set data flow result=40
03:20:44 Configure result=40
03:20:46 SkyScan init: port=COM1  logFile=Observatory_20180405032044.txt  detail=0
03:20:46 Init port COM1
03:20:46 Successful CreateFile
03:20:46 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
03:20:46 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
03:20:46 SkyScan port init result=0
03:20:46 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
03:20:46 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
03:20:46 SkyScan SmartMotor 1 sw rev=25
03:20:46 SkyScan SmartMotor 2 sw rev=2
03:20:46 SkyScan SmartMotor 2 response was=2VERSION 100


03:20:46 SkyScan SmartMotor 1 (az) counts/rev=24000
03:20:46 SkyScan SmartMotor 2 (ze) counts/rev=24000
03:20:46 SkyScan initialization result=0
03:20:46 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
03:20:46 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
03:20:47 FLIList err=0  nWheels=1
03:20:47 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
03:20:47 FLIOpen err=0  dev=0
03:20:47 FLIGetHWRevision err=0  hwRev=0
03:20:47 FLIGetFWRevision err=0  fwRev=32768
03:20:47 FLIGetFilterCount err=0  nFilters=6
03:20:47 FLIGetFilterPos err=0  currentPosition=-1
03:20:47 FLIGetStepsRemaining err=0  RemainingSteps=0
03:20:47 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
03:20:47 FLIFreeList err=0
03:20:47 Observatory log will be written every 1200000 msec
03:20:47 Received message from Master: op=Identify serial=111
03:20:49 Received message from Master: op=SetupFPI serial=115
03:20:49 SkyScan home
03:20:49 SkyScan home: resp=1
03:21:20 SkyScan home response=10000
03:21:20 Received message from Master: op=State serial=116
03:21:20 GetSingleValue result=40  Value=cccccccc
03:21:20 SkyScan query
03:21:20 SkyScan query done: ret=0  az=0<--12988  ze=-79.995<-17333  Statuses=0009 0008
03:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:21:20 Parameters OK
03:21:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:21:20 Set A/D data flow result=40
03:21:20 Set A/D channel type result=40
03:21:20 Set A/D encoding result=40
03:21:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:21:20 Set channel filter=0.000000e+000  result=40
03:21:20 Config A/D  Result=40
03:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:21:20 Get A/D filter: -9.255963e+061  result=40
03:21:20 Get A/D value=-858993460  result=40
03:21:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:21:20 Parameters OK
03:21:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:21:20 Set A/D data flow result=40
03:21:20 Set A/D channel type result=40
03:21:20 Set A/D encoding result=40
03:21:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:21:20 Set channel filter=0.000000e+000  result=40
03:21:20 Config A/D  Result=40
03:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:21:20 Get A/D filter: -9.255963e+061  result=40
03:21:20 Get A/D value=-858993460  result=40
03:21:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:21:20 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:21:20 Aux=
03:21:20 Message to Master, serial 116 queued
03:21:20 Received message from Master: op=State serial=117
03:21:20 GetSingleValue result=40  Value=cccccccc
03:21:20 SkyScan query
03:21:21 SkyScan query done: ret=0  az=0<--13060  ze=-79.995<-17333  Statuses=0009 0008
03:21:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:21:21 Parameters OK
03:21:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:21:21 Set A/D data flow result=40
03:21:21 Set A/D channel type result=40
03:21:21 Set A/D encoding result=40
03:21:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:21:21 Set channel filter=0.000000e+000  result=40
03:21:21 Config A/D  Result=40
03:21:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:21:21 Get A/D filter: -9.255963e+061  result=40
03:21:21 Get A/D value=-858993460  result=40
03:21:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:21:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:21:21 Parameters OK
03:21:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:21:21 Set A/D data flow result=40
03:21:21 Set A/D channel type result=40
03:21:21 Set A/D encoding result=40
03:21:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:21:21 Set channel filter=0.000000e+000  result=40
03:21:21 Config A/D  Result=40
03:21:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:21:21 Get A/D filter: -9.255963e+061  result=40
03:21:21 Get A/D value=-858993460  result=40
03:21:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:21:21 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:21:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:21:21 Aux=
03:21:21 Message to Master, serial 117 queued
03:22:06 Received message from Master: op=PointingHead serial=118
03:22:06 Move0 PH to az=2.600000e+001 (2.200000e+001)  zen=8.000000e+001 (8.000000e+001)
03:22:06 SkyScan point: az=22->1467  ze=80->6667  Resp=0
03:22:06 Point started: ret=0
03:22:06 point_skyscan result=0
03:22:07 Check angles
03:22:07 SkyScan query
03:22:07 SkyScan query done: ret=0  az=70.53<-4702  ze=-51.105<-15407  Statuses=0004 0009
03:22:07 Msec=0  True Az=70.53  Ze=-51.105  Az status=0004  Ze status=0009
03:22:07 Check angles
03:22:07 SkyScan query
03:22:08 SkyScan query done: ret=0  az=52.77<-3518  ze=-29.73<-13982  Statuses=0009 0009
03:22:08 Msec=750  True Az=52.77  Ze=-29.73  Az status=0009  Ze status=0009
03:22:08 Check angles
03:22:08 SkyScan query
03:22:09 SkyScan query done: ret=0  az=35.355<-2357  ze=-8.745<-12583  Statuses=0009 0009
03:22:09 Msec=1500  True Az=35.355  Ze=-8.745  Az status=0009  Ze status=0009
03:22:09 Check angles
03:22:09 SkyScan query
03:22:10 SkyScan query done: ret=0  az=21.93<-1462  ze=12.195<-11187  Statuses=0009 0009
03:22:10 Msec=2250  True Az=21.93  Ze=12.195  Az status=0009  Ze status=0009
03:22:10 Check angles
03:22:10 SkyScan query
03:22:10 SkyScan query done: ret=0  az=21.99<-1466  ze=33.15<-9790  Statuses=0008 0009
03:22:10 Msec=3000  True Az=21.99  Ze=33.15  Az status=0008  Ze status=0009
03:22:10 Check angles
03:22:10 SkyScan query
03:22:11 SkyScan query done: ret=0  az=21.99<-1466  ze=54.09<-8394  Statuses=0008 0009
03:22:11 Msec=3750  True Az=21.99  Ze=54.09  Az status=0008  Ze status=0009
03:22:11 Check angles
03:22:11 SkyScan query
03:22:12 SkyScan query done: ret=0  az=22.005<-1467  ze=75.045<-6997  Statuses=0008 0009
03:22:12 Msec=4500  True Az=22.005  Ze=75.045  Az status=0008  Ze status=0009
03:22:12 Check angles
03:22:12 SkyScan query
03:22:13 SkyScan query done: ret=0  az=22.005<-1467  ze=80.055<-6663  Statuses=0008 0008
03:22:13 Msec=5250  True Az=22.005  Ze=80.055  Az status=0008  Ze status=0008
03:22:13 Message to Master queued w/err=0: serial=118 error=0
03:22:28 Received message from Master: op=PointingHead serial=119
03:22:28 Move0 PH to az=1.520000e+002 (1.480000e+002)  zen=8.000000e+001 (8.000000e+001)
03:22:28 SkyScan point: az=148->9867  ze=80->6667  Resp=0
03:22:28 Point started: ret=0
03:22:28 point_skyscan result=0
03:22:29 Check angles
03:22:29 SkyScan query
03:22:29 SkyScan query done: ret=0  az=44.775<-2985  ze=79.995<-6667  Statuses=0009 0008
03:22:29 Msec=0  True Az=44.775  Ze=79.995  Az status=0009  Ze status=0008
03:22:29 Check angles
03:22:29 SkyScan query
03:22:30 SkyScan query done: ret=0  az=62.52<-4168  ze=79.995<-6667  Statuses=0009 0008
03:22:30 Msec=750  True Az=62.52  Ze=79.995  Az status=0009  Ze status=0008
03:22:30 Check angles
03:22:30 SkyScan query
03:22:31 SkyScan query done: ret=0  az=79.71<-5314  ze=79.995<-6667  Statuses=0009 0008
03:22:31 Msec=1500  True Az=79.71  Ze=79.995  Az status=0009  Ze status=0008
03:22:31 Check angles
03:22:31 SkyScan query
03:22:31 SkyScan query done: ret=0  az=97.155<-6477  ze=79.995<-6667  Statuses=0009 0008
03:22:31 Msec=2250  True Az=97.155  Ze=79.995  Az status=0009  Ze status=0008
03:22:32 Check angles
03:22:32 SkyScan query
03:22:32 SkyScan query done: ret=0  az=114.6<-7640  ze=79.995<-6667  Statuses=0009 0008
03:22:32 Msec=3000  True Az=114.6  Ze=79.995  Az status=0009  Ze status=0008
03:22:32 Check angles
03:22:32 SkyScan query
03:22:33 SkyScan query done: ret=0  az=132.165<-8811  ze=79.995<-6667  Statuses=0009 0008
03:22:33 Msec=3750  True Az=132.165  Ze=79.995  Az status=0009  Ze status=0008
03:22:33 Check angles
03:22:33 SkyScan query
03:22:34 SkyScan query done: ret=0  az=147.99<-9866  ze=79.995<-6667  Statuses=0009 0008
03:22:34 Msec=4500  True Az=147.99  Ze=79.995  Az status=0009  Ze status=0008
03:22:34 Check angles
03:22:34 SkyScan query
03:22:34 SkyScan query done: ret=0  az=148.005<-9867  ze=79.995<-6667  Statuses=0008 0008
03:22:34 Msec=5250  True Az=148.005  Ze=79.995  Az status=0008  Ze status=0008
03:22:34 Message to Master queued w/err=0: serial=119 error=0
03:22:49 Received message from Master: op=PointingHead serial=120
03:22:49 Move0 PH to az=-8.200000e+001 (-8.600000e+001)  zen=8.000000e+001 (8.000000e+001)
03:22:49 SkyScan point: az=-86->6267  ze=80->17333  Resp=0
03:22:50 Point started: ret=0
03:22:50 point_skyscan result=0
03:22:51 Check angles
03:22:51 SkyScan query
03:22:51 SkyScan query done: ret=0  az=125.055<-8337  ze=50.28<-8648  Statuses=0009 0009
03:22:51 Msec=0  True Az=125.055  Ze=50.28  Az status=0009  Ze status=0009
03:22:51 Check angles
03:22:51 SkyScan query
03:22:52 SkyScan query done: ret=0  az=107.16<-7144  ze=28.92<-10072  Statuses=0009 0009
03:22:52 Msec=750  True Az=107.16  Ze=28.92  Az status=0009  Ze status=0009
03:22:52 Check angles
03:22:52 SkyScan query
03:22:53 SkyScan query done: ret=0  az=94.005<-6267  ze=8.415<-11439  Statuses=0009 0009
03:22:53 Msec=1500  True Az=94.005  Ze=8.415  Az status=0009  Ze status=0009
03:22:53 Check angles
03:22:53 SkyScan query
03:22:53 SkyScan query done: ret=0  az=94.005<-6267  ze=-12.555<-12837  Statuses=0008 0009
03:22:53 Msec=2250  True Az=94.005  Ze=-12.555  Az status=0008  Ze status=0009
03:22:54 Check angles
03:22:54 SkyScan query
03:22:54 SkyScan query done: ret=0  az=94.005<-6267  ze=-33.495<-14233  Statuses=0008 0009
03:22:54 Msec=3000  True Az=94.005  Ze=-33.495  Az status=0008  Ze status=0009
03:22:54 Check angles
03:22:54 SkyScan query
03:22:55 SkyScan query done: ret=0  az=94.005<-6267  ze=-54.465<-15631  Statuses=0008 0009
03:22:55 Msec=3750  True Az=94.005  Ze=-54.465  Az status=0008  Ze status=0009
03:22:55 Check angles
03:22:55 SkyScan query
03:22:56 SkyScan query done: ret=0  az=94.005<-6267  ze=-75.435<-17029  Statuses=0008 0009
03:22:56 Msec=4500  True Az=94.005  Ze=-75.435  Az status=0008  Ze status=0009
03:22:56 Check angles
03:22:56 SkyScan query
03:22:56 SkyScan query done: ret=0  az=94.005<-6267  ze=-80.055<-17337  Statuses=0008 0008
03:22:56 Msec=5250  True Az=94.005  Ze=-80.055  Az status=0008  Ze status=0008
03:22:56 Message to Master queued w/err=0: serial=120 error=0
03:26:15 * END OF LOG *