03:17:42 Starting Observatory v1.63  12/8/14
03:17:42 Startup delay was 0 sec
03:17:42 Process ID=3764  UTC is 2018-4-5  03:17:42.664; local time is 2018-4-5  03:17:42.664 Coordinated Universal Time (diff=0 min)
03:17:42 High-resolution performance counter is available; frequency is 2194.510000 MHz
03:17:42 Master has allocated shared memory
03:17:42 Reading parameter file ObservatoryControlFile.txt
03:17:42 Apparatus is type 2 (Alaska)
03:17:42 Detailed log 0
03:17:42 Pointing head type specified by Observatory control file is SkyScan
03:17:42 SkyScan model specified by Observatory control file is 0
03:17:42 Pointing head communications specified by Observatory control file via COM1
03:17:42 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
03:17:42 Corrections added to script-specified directions are az=-3.000000, ze=0.000000
03:17:42 High-resolution performance counter has been disabled by Observatory control file
03:17:42 Filter type is 4
03:17:42 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
03:17:42   LASER           220            yes O 
03:17:42 Driver init  Result=78
03:17:42 Board name=""
03:17:42 Board entry="No Open Layers boards installed"
03:17:42 Board status=0
03:17:42 Get version result=0   SDK version is "V6.2.1.0"
03:17:42 Get driver version result=39   Version is "[unknown]"
03:17:42 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
03:17:42 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
03:17:42 Digital I/O configure subsystem 0 as input
03:17:42 Set data flow result=40
03:17:42 Configure result=40
03:17:42 Digital I/O configure subsystem 0 as output
03:17:42 Set data flow result=40
03:17:42 Configure result=40
03:17:43 SkyScan init: port=COM1  logFile=Observatory_20180405031742.txt  detail=0
03:17:43 Init port COM1
03:17:43 Successful CreateFile
03:17:43 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
03:17:43 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
03:17:43 SkyScan port init result=0
03:17:43 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
03:17:44 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
03:17:44 SkyScan SmartMotor 1 sw rev=25
03:17:44 SkyScan SmartMotor 2 sw rev=2
03:17:44 SkyScan SmartMotor 2 response was=2VERSION 100


03:17:44 SkyScan SmartMotor 1 (az) counts/rev=24000
03:17:44 SkyScan SmartMotor 2 (ze) counts/rev=24000
03:17:44 SkyScan initialization result=0
03:17:44 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
03:17:44 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
03:17:44 FLIList err=0  nWheels=1
03:17:44 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
03:17:44 FLIOpen err=0  dev=0
03:17:44 FLIGetHWRevision err=0  hwRev=0
03:17:44 FLIGetFWRevision err=0  fwRev=32768
03:17:44 FLIGetFilterCount err=0  nFilters=6
03:17:44 FLIGetFilterPos err=0  currentPosition=-1
03:17:44 FLIGetStepsRemaining err=0  RemainingSteps=0
03:17:44 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
03:17:44 FLIFreeList err=0
03:17:44 Observatory log will be written every 1200000 msec
03:17:44 Received message from Master: op=Identify serial=111
03:17:49 Received message from Master: op=SetupFPI serial=115
03:17:49 SkyScan home
03:17:49 SkyScan home: resp=1
03:18:19 SkyScan home response=10000
03:18:19 Received message from Master: op=State serial=116
03:18:19 GetSingleValue result=40  Value=cccccccc
03:18:19 SkyScan query
03:18:19 SkyScan query done: ret=0  az=0<--13199  ze=-79.995<-17333  Statuses=0009 0008
03:18:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:18:19 Parameters OK
03:18:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:18:19 Set A/D data flow result=40
03:18:19 Set A/D channel type result=40
03:18:19 Set A/D encoding result=40
03:18:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:18:19 Set channel filter=0.000000e+000  result=40
03:18:19 Config A/D  Result=40
03:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:18:19 Get A/D filter: -9.255963e+061  result=40
03:18:19 Get A/D value=-858993460  result=40
03:18:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:18:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:18:19 Parameters OK
03:18:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:18:19 Set A/D data flow result=40
03:18:19 Set A/D channel type result=40
03:18:19 Set A/D encoding result=40
03:18:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:18:19 Set channel filter=0.000000e+000  result=40
03:18:19 Config A/D  Result=40
03:18:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:18:19 Get A/D filter: -9.255963e+061  result=40
03:18:19 Get A/D value=-858993460  result=40
03:18:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:18:19 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:18:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:18:19 Aux=
03:18:19 Message to Master, serial 116 queued
03:18:19 Received message from Master: op=State serial=117
03:18:19 GetSingleValue result=40  Value=cccccccc
03:18:19 SkyScan query
03:18:20 SkyScan query done: ret=0  az=0<--13270  ze=-79.995<-17333  Statuses=0009 0008
03:18:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:18:20 Parameters OK
03:18:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:18:20 Set A/D data flow result=40
03:18:20 Set A/D channel type result=40
03:18:20 Set A/D encoding result=40
03:18:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:18:20 Set channel filter=0.000000e+000  result=40
03:18:20 Config A/D  Result=40
03:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:18:20 Get A/D filter: -9.255963e+061  result=40
03:18:20 Get A/D value=-858993460  result=40
03:18:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:18:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:18:20 Parameters OK
03:18:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:18:20 Set A/D data flow result=40
03:18:20 Set A/D channel type result=40
03:18:20 Set A/D encoding result=40
03:18:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:18:20 Set channel filter=0.000000e+000  result=40
03:18:20 Config A/D  Result=40
03:18:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:18:20 Get A/D filter: -9.255963e+061  result=40
03:18:20 Get A/D value=-858993460  result=40
03:18:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:18:20 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:18:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:18:20 Aux=
03:18:20 Message to Master, serial 117 queued
03:19:05 Received message from Master: op=PointingHead serial=118
03:19:05 Move0 PH to az=2.600000e+001 (2.300000e+001)  zen=8.000000e+001 (8.000000e+001)
03:19:05 SkyScan point: az=23->1533  ze=80->6667  Resp=0
03:19:05 Point started: ret=0
03:19:05 point_skyscan result=0
03:19:06 Check angles
03:19:06 SkyScan query
03:19:07 SkyScan query done: ret=0  az=70.08<-4672  ze=-50.595<-15373  Statuses=0004 0009
03:19:07 Msec=0  True Az=70.08  Ze=-50.595  Az status=0004  Ze status=0009
03:19:07 Check angles
03:19:07 SkyScan query
03:19:07 SkyScan query done: ret=0  az=52.68<-3512  ze=-29.64<-13976  Statuses=0009 0009
03:19:07 Msec=750  True Az=52.68  Ze=-29.64  Az status=0009  Ze status=0009
03:19:07 Check angles
03:19:07 SkyScan query
03:19:08 SkyScan query done: ret=0  az=34.875<-2325  ze=-8.25<-12550  Statuses=0009 0009
03:19:08 Msec=1500  True Az=34.875  Ze=-8.25  Az status=0009  Ze status=0009
03:19:08 Check angles
03:19:08 SkyScan query
03:19:09 SkyScan query done: ret=0  az=23.01<-1534  ze=13.155<-11123  Statuses=0008 0009
03:19:09 Msec=2250  True Az=23.01  Ze=13.155  Az status=0008  Ze status=0009
03:19:09 Check angles
03:19:09 SkyScan query
03:19:10 SkyScan query done: ret=0  az=22.995<-1533  ze=34.095<-9727  Statuses=0008 0009
03:19:10 Msec=3000  True Az=22.995  Ze=34.095  Az status=0008  Ze status=0009
03:19:10 Check angles
03:19:10 SkyScan query
03:19:10 SkyScan query done: ret=0  az=22.995<-1533  ze=55.065<-8329  Statuses=0008 0009
03:19:10 Msec=3750  True Az=22.995  Ze=55.065  Az status=0008  Ze status=0009
03:19:10 Check angles
03:19:10 SkyScan query
03:19:11 SkyScan query done: ret=0  az=22.995<-1533  ze=75.99<-6934  Statuses=0008 0009
03:19:11 Msec=4500  True Az=22.995  Ze=75.99  Az status=0008  Ze status=0009
03:19:11 Check angles
03:19:11 SkyScan query
03:19:12 SkyScan query done: ret=0  az=22.995<-1533  ze=80.04<-6664  Statuses=0008 0008
03:19:12 Msec=5250  True Az=22.995  Ze=80.04  Az status=0008  Ze status=0008
03:19:12 Message to Master queued w/err=0: serial=118 error=0
03:19:27 Received message from Master: op=PointingHead serial=119
03:19:27 Move0 PH to az=1.520000e+002 (1.490000e+002)  zen=8.000000e+001 (8.000000e+001)
03:19:27 SkyScan point: az=149->9933  ze=80->6667  Resp=0
03:19:27 Point started: ret=0
03:19:27 point_skyscan result=0
03:19:28 Check angles
03:19:28 SkyScan query
03:19:28 SkyScan query done: ret=0  az=45.93<-3062  ze=79.995<-6667  Statuses=0009 0008
03:19:28 Msec=0  True Az=45.93  Ze=79.995  Az status=0009  Ze status=0008
03:19:29 Check angles
03:19:29 SkyScan query
03:19:29 SkyScan query done: ret=0  az=63.42<-4228  ze=79.995<-6667  Statuses=0009 0008
03:19:29 Msec=750  True Az=63.42  Ze=79.995  Az status=0009  Ze status=0008
03:19:29 Check angles
03:19:29 SkyScan query
03:19:30 SkyScan query done: ret=0  az=80.94<-5396  ze=79.995<-6667  Statuses=0009 0008
03:19:30 Msec=1500  True Az=80.94  Ze=79.995  Az status=0009  Ze status=0008
03:19:30 Check angles
03:19:30 SkyScan query
03:19:31 SkyScan query done: ret=0  az=98.28<-6552  ze=79.995<-6667  Statuses=0009 0008
03:19:31 Msec=2250  True Az=98.28  Ze=79.995  Az status=0009  Ze status=0008
03:19:31 Check angles
03:19:31 SkyScan query
03:19:31 SkyScan query done: ret=0  az=115.845<-7723  ze=79.995<-6667  Statuses=0009 0008
03:19:31 Msec=3000  True Az=115.845  Ze=79.995  Az status=0009  Ze status=0008
03:19:32 Check angles
03:19:32 SkyScan query
03:19:32 SkyScan query done: ret=0  az=133.275<-8885  ze=79.995<-6667  Statuses=0009 0008
03:19:32 Msec=3750  True Az=133.275  Ze=79.995  Az status=0009  Ze status=0008
03:19:32 Check angles
03:19:32 SkyScan query
03:19:33 SkyScan query done: ret=0  az=148.995<-9933  ze=79.995<-6667  Statuses=0009 0008
03:19:33 Msec=4500  True Az=148.995  Ze=79.995  Az status=0009  Ze status=0008
03:19:33 Check angles
03:19:33 SkyScan query
03:19:34 SkyScan query done: ret=0  az=148.995<-9933  ze=79.995<-6667  Statuses=0008 0008
03:19:34 Msec=5250  True Az=148.995  Ze=79.995  Az status=0008  Ze status=0008
03:19:34 Message to Master queued w/err=0: serial=119 error=0
03:19:49 Received message from Master: op=PointingHead serial=120
03:19:49 Move0 PH to az=-8.200000e+001 (-8.500000e+001)  zen=8.000000e+001 (8.000000e+001)
03:19:49 SkyScan point: az=-85->6333  ze=80->17333  Resp=0
03:19:49 Point started: ret=0
03:19:49 point_skyscan result=0
03:19:50 Check angles
03:19:50 SkyScan query
03:19:50 SkyScan query done: ret=0  az=125.955<-8397  ze=50.28<-8648  Statuses=0009 0009
03:19:50 Msec=0  True Az=125.955  Ze=50.28  Az status=0009  Ze status=0009
03:19:51 Check angles
03:19:51 SkyScan query
03:19:51 SkyScan query done: ret=0  az=108.165<-7211  ze=28.935<-10071  Statuses=0009 0009
03:19:51 Msec=750  True Az=108.165  Ze=28.935  Az status=0009  Ze status=0009
03:19:51 Check angles
03:19:51 SkyScan query
03:19:52 SkyScan query done: ret=0  az=94.995<-6333  ze=7.5<-11500  Statuses=0009 0009
03:19:52 Msec=1500  True Az=94.995  Ze=7.5  Az status=0009  Ze status=0009
03:19:52 Check angles
03:19:52 SkyScan query
03:19:53 SkyScan query done: ret=0  az=94.995<-6333  ze=-13.44<-12896  Statuses=0008 0009
03:19:53 Msec=2250  True Az=94.995  Ze=-13.44  Az status=0008  Ze status=0009
03:19:53 Check angles
03:19:53 SkyScan query
03:19:53 SkyScan query done: ret=0  az=94.995<-6333  ze=-34.38<-14292  Statuses=0008 0009
03:19:53 Msec=3000  True Az=94.995  Ze=-34.38  Az status=0008  Ze status=0009
03:19:54 Check angles
03:19:54 SkyScan query
03:19:54 SkyScan query done: ret=0  az=94.995<-6333  ze=-55.77<-15718  Statuses=0008 0009
03:19:54 Msec=3750  True Az=94.995  Ze=-55.77  Az status=0008  Ze status=0009
03:19:54 Check angles
03:19:54 SkyScan query
03:19:55 SkyScan query done: ret=0  az=94.995<-6333  ze=-77.16<-17144  Statuses=0008 0009
03:19:55 Msec=4500  True Az=94.995  Ze=-77.16  Az status=0008  Ze status=0009
03:19:55 Check angles
03:19:55 SkyScan query
03:19:56 SkyScan query done: ret=0  az=94.995<-6333  ze=-80.04<-17336  Statuses=0008 0008
03:19:56 Msec=5250  True Az=94.995  Ze=-80.04  Az status=0008  Ze status=0008
03:19:56 Message to Master queued w/err=0: serial=120 error=0
03:20:37 * END OF LOG *