03:14:33 Starting Observatory v1.63  12/8/14
03:14:33 Startup delay was 0 sec
03:14:33 Process ID=2308  UTC is 2018-4-5  03:14:33.477; local time is 2018-4-5  03:14:33.477 Coordinated Universal Time (diff=0 min)
03:14:33 High-resolution performance counter is available; frequency is 2194.510000 MHz
03:14:33 Master has allocated shared memory
03:14:33 Reading parameter file ObservatoryControlFile.txt
03:14:33 Apparatus is type 2 (Alaska)
03:14:33 Detailed log 0
03:14:33 Pointing head type specified by Observatory control file is SkyScan
03:14:33 SkyScan model specified by Observatory control file is 0
03:14:33 Pointing head communications specified by Observatory control file via COM1
03:14:33 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
03:14:33 Corrections added to script-specified directions are az=5.000000, ze=0.000000
03:14:33 High-resolution performance counter has been disabled by Observatory control file
03:14:33 Filter type is 4
03:14:33 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
03:14:33   LASER           220            yes O 
03:14:33 Driver init  Result=78
03:14:33 Board name=""
03:14:33 Board entry="No Open Layers boards installed"
03:14:33 Board status=0
03:14:33 Get version result=0   SDK version is "V6.2.1.0"
03:14:33 Get driver version result=39   Version is "[unknown]"
03:14:33 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
03:14:33 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
03:14:33 Digital I/O configure subsystem 0 as input
03:14:33 Set data flow result=40
03:14:33 Configure result=40
03:14:33 Digital I/O configure subsystem 0 as output
03:14:33 Set data flow result=40
03:14:33 Configure result=40
03:14:34 SkyScan init: port=COM1  logFile=Observatory_20180405031433.txt  detail=0
03:14:34 Init port COM1
03:14:34 Successful CreateFile
03:14:34 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
03:14:34 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
03:14:34 SkyScan port init result=0
03:14:35 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
03:14:35 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
03:14:35 SkyScan SmartMotor 1 sw rev=25
03:14:35 SkyScan SmartMotor 2 sw rev=2
03:14:35 SkyScan SmartMotor 2 response was=2VERSION 100


03:14:35 SkyScan SmartMotor 1 (az) counts/rev=24000
03:14:35 SkyScan SmartMotor 2 (ze) counts/rev=24000
03:14:35 SkyScan initialization result=0
03:14:35 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
03:14:35 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
03:14:35 FLIList err=0  nWheels=1
03:14:35 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
03:14:35 FLIOpen err=0  dev=0
03:14:35 FLIGetHWRevision err=0  hwRev=0
03:14:35 FLIGetFWRevision err=0  fwRev=32768
03:14:35 FLIGetFilterCount err=0  nFilters=6
03:14:35 FLIGetFilterPos err=0  currentPosition=-1
03:14:35 FLIGetStepsRemaining err=0  RemainingSteps=0
03:14:35 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
03:14:35 FLIFreeList err=0
03:14:35 Observatory log will be written every 1200000 msec
03:14:35 Received message from Master: op=Identify serial=111
03:14:40 Received message from Master: op=SetupFPI serial=115
03:14:40 SkyScan home
03:14:40 SkyScan home: resp=1
03:15:10 SkyScan home response=10000
03:15:10 Received message from Master: op=State serial=116
03:15:10 GetSingleValue result=40  Value=cccccccc
03:15:10 SkyScan query
03:15:11 SkyScan query done: ret=0  az=0<--13064  ze=-79.995<-17333  Statuses=0009 0008
03:15:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:15:11 Parameters OK
03:15:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:15:11 Set A/D data flow result=40
03:15:11 Set A/D channel type result=40
03:15:11 Set A/D encoding result=40
03:15:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:15:11 Set channel filter=0.000000e+000  result=40
03:15:11 Config A/D  Result=40
03:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:15:11 Get A/D filter: -9.255963e+061  result=40
03:15:11 Get A/D value=-858993460  result=40
03:15:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:15:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:15:11 Parameters OK
03:15:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:15:11 Set A/D data flow result=40
03:15:11 Set A/D channel type result=40
03:15:11 Set A/D encoding result=40
03:15:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:15:11 Set channel filter=0.000000e+000  result=40
03:15:11 Config A/D  Result=40
03:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:15:11 Get A/D filter: -9.255963e+061  result=40
03:15:11 Get A/D value=-858993460  result=40
03:15:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:15:11 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:15:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:15:11 Aux=
03:15:11 Message to Master, serial 116 queued
03:15:11 Received message from Master: op=State serial=117
03:15:11 GetSingleValue result=40  Value=cccccccc
03:15:11 SkyScan query
03:15:12 SkyScan query done: ret=0  az=0<--13136  ze=-79.995<-17333  Statuses=0009 0008
03:15:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:15:12 Parameters OK
03:15:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:15:12 Set A/D data flow result=40
03:15:12 Set A/D channel type result=40
03:15:12 Set A/D encoding result=40
03:15:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:15:12 Set channel filter=0.000000e+000  result=40
03:15:12 Config A/D  Result=40
03:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:15:12 Get A/D filter: -9.255963e+061  result=40
03:15:12 Get A/D value=-858993460  result=40
03:15:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:15:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:15:12 Parameters OK
03:15:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:15:12 Set A/D data flow result=40
03:15:12 Set A/D channel type result=40
03:15:12 Set A/D encoding result=40
03:15:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:15:12 Set channel filter=0.000000e+000  result=40
03:15:12 Config A/D  Result=40
03:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:15:12 Get A/D filter: -9.255963e+061  result=40
03:15:12 Get A/D value=-858993460  result=40
03:15:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:15:12 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:15:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:15:12 Aux=
03:15:12 Message to Master, serial 117 queued
03:15:57 Received message from Master: op=PointingHead serial=118
03:15:57 Move0 PH to az=2.600000e+001 (3.100000e+001)  zen=8.000000e+001 (8.000000e+001)
03:15:57 SkyScan point: az=31->2067  ze=80->6667  Resp=0
03:15:57 Point started: ret=0
03:15:57 point_skyscan result=0
03:15:57 Check angles
03:15:57 SkyScan query
03:15:58 SkyScan query done: ret=0  az=70.05<-4670  ze=-50.52<-15368  Statuses=0004 0009
03:15:58 Msec=0  True Az=70.05  Ze=-50.52  Az status=0004  Ze status=0009
03:15:58 Check angles
03:15:58 SkyScan query
03:15:59 SkyScan query done: ret=0  az=52.26<-3484  ze=-29.145<-13943  Statuses=0009 0009
03:15:59 Msec=750  True Az=52.26  Ze=-29.145  Az status=0009  Ze status=0009
03:15:59 Check angles
03:15:59 SkyScan query
03:15:59 SkyScan query done: ret=0  az=34.785<-2319  ze=-8.175<-12545  Statuses=0009 0009
03:15:59 Msec=1500  True Az=34.785  Ze=-8.175  Az status=0009  Ze status=0009
03:16:00 Check angles
03:16:00 SkyScan query
03:16:00 SkyScan query done: ret=0  az=31.005<-2067  ze=12.765<-11149  Statuses=0008 0009
03:16:00 Msec=2250  True Az=31.005  Ze=12.765  Az status=0008  Ze status=0009
03:16:00 Check angles
03:16:00 SkyScan query
03:16:01 SkyScan query done: ret=0  az=31.005<-2067  ze=33.735<-9751  Statuses=0008 0009
03:16:01 Msec=3000  True Az=31.005  Ze=33.735  Az status=0008  Ze status=0009
03:16:01 Check angles
03:16:01 SkyScan query
03:16:02 SkyScan query done: ret=0  az=30.99<-2066  ze=54.69<-8354  Statuses=0008 0009
03:16:02 Msec=3750  True Az=30.99  Ze=54.69  Az status=0008  Ze status=0009
03:16:02 Check angles
03:16:02 SkyScan query
03:16:02 SkyScan query done: ret=0  az=31.005<-2067  ze=75.645<-6957  Statuses=0008 0009
03:16:02 Msec=4500  True Az=31.005  Ze=75.645  Az status=0008  Ze status=0009
03:16:03 Check angles
03:16:03 SkyScan query
03:16:03 SkyScan query done: ret=0  az=31.005<-2067  ze=80.04<-6664  Statuses=0008 0008
03:16:03 Msec=5250  True Az=31.005  Ze=80.04  Az status=0008  Ze status=0008
03:16:03 Message to Master queued w/err=0: serial=118 error=0
03:16:18 Received message from Master: op=PointingHead serial=119
03:16:18 Move0 PH to az=1.520000e+002 (1.570000e+002)  zen=8.000000e+001 (8.000000e+001)
03:16:18 SkyScan point: az=157->10467  ze=80->6667  Resp=0
03:16:19 Point started: ret=0
03:16:19 point_skyscan result=0
03:16:19 Check angles
03:16:19 SkyScan query
03:16:20 SkyScan query done: ret=0  az=54.12<-3608  ze=79.995<-6667  Statuses=0009 0008
03:16:20 Msec=0  True Az=54.12  Ze=79.995  Az status=0009  Ze status=0008
03:16:20 Check angles
03:16:20 SkyScan query
03:16:21 SkyScan query done: ret=0  az=71.925<-4795  ze=79.995<-6667  Statuses=0009 0008
03:16:21 Msec=750  True Az=71.925  Ze=79.995  Az status=0009  Ze status=0008
03:16:21 Check angles
03:16:21 SkyScan query
03:16:21 SkyScan query done: ret=0  az=89.28<-5952  ze=79.995<-6667  Statuses=0009 0008
03:16:21 Msec=1500  True Az=89.28  Ze=79.995  Az status=0009  Ze status=0008
03:16:22 Check angles
03:16:22 SkyScan query
03:16:22 SkyScan query done: ret=0  az=106.815<-7121  ze=79.995<-6667  Statuses=0009 0008
03:16:22 Msec=2250  True Az=106.815  Ze=79.995  Az status=0009  Ze status=0008
03:16:22 Check angles
03:16:22 SkyScan query
03:16:23 SkyScan query done: ret=0  az=124.605<-8307  ze=79.995<-6667  Statuses=0009 0008
03:16:23 Msec=3000  True Az=124.605  Ze=79.995  Az status=0009  Ze status=0008
03:16:23 Check angles
03:16:23 SkyScan query
03:16:24 SkyScan query done: ret=0  az=142.38<-9492  ze=79.995<-6667  Statuses=0009 0008
03:16:24 Msec=3750  True Az=142.38  Ze=79.995  Az status=0009  Ze status=0008
03:16:24 Check angles
03:16:24 SkyScan query
03:16:24 SkyScan query done: ret=0  az=156.99<-10466  ze=79.995<-6667  Statuses=0009 0008
03:16:24 Msec=4500  True Az=156.99  Ze=79.995  Az status=0009  Ze status=0008
03:16:25 Check angles
03:16:25 SkyScan query
03:16:25 SkyScan query done: ret=0  az=157.005<-10467  ze=79.995<-6667  Statuses=0008 0008
03:16:25 Msec=5250  True Az=157.005  Ze=79.995  Az status=0008  Ze status=0008
03:16:25 Message to Master queued w/err=0: serial=119 error=0
03:16:40 Received message from Master: op=PointingHead serial=120
03:16:40 Move0 PH to az=-8.200000e+001 (-7.700000e+001)  zen=8.000000e+001 (8.000000e+001)
03:16:40 SkyScan point: az=-77->6867  ze=80->17333  Resp=0
03:16:41 Point started: ret=0
03:16:41 point_skyscan result=0
03:16:41 Check angles
03:16:41 SkyScan query
03:16:42 SkyScan query done: ret=0  az=133.59<-8906  ze=49.62<-8692  Statuses=0009 0009
03:16:42 Msec=0  True Az=133.59  Ze=49.62  Az status=0009  Ze status=0009
03:16:42 Check angles
03:16:42 SkyScan query
03:16:43 SkyScan query done: ret=0  az=116.085<-7739  ze=28.68<-10088  Statuses=0009 0009
03:16:43 Msec=750  True Az=116.085  Ze=28.68  Az status=0009  Ze status=0009
03:16:43 Check angles
03:16:43 SkyScan query
03:16:43 SkyScan query done: ret=0  az=103.02<-6868  ze=7.275<-11515  Statuses=0009 0009
03:16:43 Msec=1500  True Az=103.02  Ze=7.275  Az status=0009  Ze status=0009
03:16:44 Check angles
03:16:44 SkyScan query
03:16:44 SkyScan query done: ret=0  az=102.99<-6866  ze=-13.665<-12911  Statuses=0008 0009
03:16:44 Msec=2250  True Az=102.99  Ze=-13.665  Az status=0008  Ze status=0009
03:16:44 Check angles
03:16:44 SkyScan query
03:16:45 SkyScan query done: ret=0  az=103.005<-6867  ze=-34.635<-14309  Statuses=0008 0009
03:16:45 Msec=3000  True Az=103.005  Ze=-34.635  Az status=0008  Ze status=0009
03:16:45 Check angles
03:16:45 SkyScan query
03:16:46 SkyScan query done: ret=0  az=103.005<-6867  ze=-55.575<-15705  Statuses=0008 0009
03:16:46 Msec=3750  True Az=103.005  Ze=-55.575  Az status=0008  Ze status=0009
03:16:46 Check angles
03:16:46 SkyScan query
03:16:46 SkyScan query done: ret=0  az=103.005<-6867  ze=-76.53<-17102  Statuses=0008 0009
03:16:46 Msec=4500  True Az=103.005  Ze=-76.53  Az status=0008  Ze status=0009
03:16:47 Check angles
03:16:47 SkyScan query
03:16:47 SkyScan query done: ret=0  az=103.005<-6867  ze=-80.04<-17336  Statuses=0008 0008
03:16:47 Msec=5250  True Az=103.005  Ze=-80.04  Az status=0008  Ze status=0008
03:16:47 Message to Master queued w/err=0: serial=120 error=0
03:17:27 * END OF LOG *