03:09:22 Starting Observatory v1.63  12/8/14
03:09:22 Startup delay was 0 sec
03:09:22 Process ID=3280  UTC is 2018-4-5  03:09:22.055; local time is 2018-4-5  03:09:22.055 Coordinated Universal Time (diff=0 min)
03:09:22 High-resolution performance counter is available; frequency is 2194.510000 MHz
03:09:22 Master has allocated shared memory
03:09:22 Reading parameter file ObservatoryControlFile.txt
03:09:22 Apparatus is type 2 (Alaska)
03:09:22 Detailed log 0
03:09:22 Pointing head type specified by Observatory control file is SkyScan
03:09:22 SkyScan model specified by Observatory control file is 0
03:09:22 Pointing head communications specified by Observatory control file via COM1
03:09:22 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
03:09:22 Corrections added to script-specified directions are az=0.000000, ze=0.000000
03:09:22 High-resolution performance counter has been disabled by Observatory control file
03:09:22 Filter type is 4
03:09:22 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
03:09:22   LASER           220            yes O 
03:09:22 Driver init  Result=78
03:09:22 Board name=""
03:09:22 Board entry="No Open Layers boards installed"
03:09:22 Board status=0
03:09:22 Get version result=0   SDK version is "V6.2.1.0"
03:09:22 Get driver version result=39   Version is "[unknown]"
03:09:22 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
03:09:22 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
03:09:22 Digital I/O configure subsystem 0 as input
03:09:22 Set data flow result=40
03:09:22 Configure result=40
03:09:22 Digital I/O configure subsystem 0 as output
03:09:22 Set data flow result=40
03:09:22 Configure result=40
03:09:23 SkyScan init: port=COM1  logFile=Observatory_20180405030922.txt  detail=0
03:09:23 Init port COM1
03:09:23 Successful CreateFile
03:09:23 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
03:09:23 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
03:09:23 SkyScan port init result=0
03:09:23 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
03:09:23 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
03:09:23 SkyScan SmartMotor 1 sw rev=25
03:09:23 SkyScan SmartMotor 2 sw rev=2
03:09:23 SkyScan SmartMotor 2 response was=2VERSION 100


03:09:23 SkyScan SmartMotor 1 (az) counts/rev=24000
03:09:23 SkyScan SmartMotor 2 (ze) counts/rev=24000
03:09:23 SkyScan initialization result=0
03:09:23 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
03:09:23 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
03:09:23 FLIList err=0  nWheels=1
03:09:23 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
03:09:23 FLIOpen err=0  dev=0
03:09:23 FLIGetHWRevision err=0  hwRev=0
03:09:23 FLIGetFWRevision err=0  fwRev=32768
03:09:23 FLIGetFilterCount err=0  nFilters=6
03:09:23 FLIGetFilterPos err=0  currentPosition=-1
03:09:23 FLIGetStepsRemaining err=0  RemainingSteps=0
03:09:23 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
03:09:23 FLIFreeList err=0
03:09:23 Observatory log will be written every 1200000 msec
03:09:24 Received message from Master: op=Identify serial=111
03:09:30 Received message from Master: op=SetupFPI serial=115
03:09:30 SkyScan home
03:09:30 SkyScan home: resp=1
03:10:01 SkyScan home response=10000
03:10:01 Received message from Master: op=State serial=116
03:10:01 GetSingleValue result=40  Value=cccccccc
03:10:01 SkyScan query
03:10:01 SkyScan query done: ret=0  az=0<--13057  ze=-79.995<-17333  Statuses=0009 0008
03:10:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:10:01 Parameters OK
03:10:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:10:01 Set A/D data flow result=40
03:10:01 Set A/D channel type result=40
03:10:01 Set A/D encoding result=40
03:10:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:10:01 Set channel filter=0.000000e+000  result=40
03:10:01 Config A/D  Result=40
03:10:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:10:01 Get A/D filter: -9.255963e+061  result=40
03:10:01 Get A/D value=-858993460  result=40
03:10:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:10:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:10:01 Parameters OK
03:10:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:10:01 Set A/D data flow result=40
03:10:01 Set A/D channel type result=40
03:10:01 Set A/D encoding result=40
03:10:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:10:01 Set channel filter=0.000000e+000  result=40
03:10:01 Config A/D  Result=40
03:10:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:10:01 Get A/D filter: -9.255963e+061  result=40
03:10:01 Get A/D value=-858993460  result=40
03:10:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:10:01 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:10:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:10:01 Aux=
03:10:01 Message to Master, serial 116 queued
03:10:01 Received message from Master: op=State serial=117
03:10:01 GetSingleValue result=40  Value=cccccccc
03:10:01 SkyScan query
03:10:02 SkyScan query done: ret=0  az=0<--13130  ze=-79.995<-17333  Statuses=0009 0008
03:10:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:10:02 Parameters OK
03:10:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:10:02 Set A/D data flow result=40
03:10:02 Set A/D channel type result=40
03:10:02 Set A/D encoding result=40
03:10:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:10:02 Set channel filter=0.000000e+000  result=40
03:10:02 Config A/D  Result=40
03:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:10:02 Get A/D filter: -9.255963e+061  result=40
03:10:02 Get A/D value=-858993460  result=40
03:10:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:10:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:10:02 Parameters OK
03:10:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:10:02 Set A/D data flow result=40
03:10:02 Set A/D channel type result=40
03:10:02 Set A/D encoding result=40
03:10:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:10:02 Set channel filter=0.000000e+000  result=40
03:10:02 Config A/D  Result=40
03:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:10:02 Get A/D filter: -9.255963e+061  result=40
03:10:02 Get A/D value=-858993460  result=40
03:10:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:10:02 PH type=1  Digital in=000000  Instrument Az=0.000000 deg  Ze=-79.995003 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=09 08
03:10:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:10:02 Aux=
03:10:02 Message to Master, serial 117 queued
03:10:47 Received message from Master: op=PointingHead serial=118
03:10:47 Move0 PH to az=2.600000e+001 (2.600000e+001)  zen=8.000000e+001 (8.000000e+001)
03:10:47 SkyScan point: az=26->1733  ze=80->6667  Resp=0
03:10:47 Point started: ret=0
03:10:47 point_skyscan result=0
03:10:48 Check angles
03:10:48 SkyScan query
03:10:48 SkyScan query done: ret=0  az=69.87<-4658  ze=-50.265<-15351  Statuses=0004 0009
03:10:48 Msec=0  True Az=69.87  Ze=-50.265  Az status=0004  Ze status=0009
03:10:49 Check angles
03:10:49 SkyScan query
03:10:49 SkyScan query done: ret=0  az=52.305<-3487  ze=-29.325<-13955  Statuses=0009 0009
03:10:49 Msec=750  True Az=52.305  Ze=-29.325  Az status=0009  Ze status=0009
03:10:49 Check angles
03:10:49 SkyScan query
03:10:50 SkyScan query done: ret=0  az=35.025<-2335  ze=-8.355<-12557  Statuses=0009 0009
03:10:50 Msec=1500  True Az=35.025  Ze=-8.355  Az status=0009  Ze status=0009
03:10:50 Check angles
03:10:50 SkyScan query
03:10:51 SkyScan query done: ret=0  az=25.995<-1733  ze=13.05<-11130  Statuses=0008 0009
03:10:51 Msec=2250  True Az=25.995  Ze=13.05  Az status=0008  Ze status=0009
03:10:51 Check angles
03:10:51 SkyScan query
03:10:51 SkyScan query done: ret=0  az=25.995<-1733  ze=34.005<-9733  Statuses=0008 0009
03:10:51 Msec=3000  True Az=25.995  Ze=34.005  Az status=0008  Ze status=0009
03:10:52 Check angles
03:10:52 SkyScan query
03:10:52 SkyScan query done: ret=0  az=25.995<-1733  ze=54.96<-8336  Statuses=0008 0009
03:10:52 Msec=3750  True Az=25.995  Ze=54.96  Az status=0008  Ze status=0009
03:10:52 Check angles
03:10:52 SkyScan query
03:10:53 SkyScan query done: ret=0  az=25.995<-1733  ze=75.915<-6939  Statuses=0008 0009
03:10:53 Msec=4500  True Az=25.995  Ze=75.915  Az status=0008  Ze status=0009
03:10:53 Check angles
03:10:53 SkyScan query
03:10:54 SkyScan query done: ret=0  az=25.995<-1733  ze=80.04<-6664  Statuses=0008 0008
03:10:54 Msec=5250  True Az=25.995  Ze=80.04  Az status=0008  Ze status=0008
03:10:54 Message to Master queued w/err=0: serial=118 error=0
03:11:09 Received message from Master: op=PointingHead serial=119
03:11:09 Move0 PH to az=1.520000e+002 (1.520000e+002)  zen=8.000000e+001 (8.000000e+001)
03:11:09 SkyScan point: az=152->10133  ze=80->6667  Resp=0
03:11:09 Point started: ret=0
03:11:09 point_skyscan result=0
03:11:10 Check angles
03:11:10 SkyScan query
03:11:10 SkyScan query done: ret=0  az=48.915<-3261  ze=79.995<-6667  Statuses=0009 0008
03:11:10 Msec=0  True Az=48.915  Ze=79.995  Az status=0009  Ze status=0008
03:11:10 Check angles
03:11:10 SkyScan query
03:11:11 SkyScan query done: ret=0  az=66.42<-4428  ze=79.995<-6667  Statuses=0009 0008
03:11:11 Msec=750  True Az=66.42  Ze=79.995  Az status=0009  Ze status=0008
03:11:11 Check angles
03:11:11 SkyScan query
03:11:12 SkyScan query done: ret=0  az=83.865<-5591  ze=79.995<-6667  Statuses=0009 0008
03:11:12 Msec=1500  True Az=83.865  Ze=79.995  Az status=0009  Ze status=0008
03:11:12 Check angles
03:11:12 SkyScan query
03:11:13 SkyScan query done: ret=0  az=101.43<-6762  ze=79.995<-6667  Statuses=0009 0008
03:11:13 Msec=2250  True Az=101.43  Ze=79.995  Az status=0009  Ze status=0008
03:11:13 Check angles
03:11:13 SkyScan query
03:11:13 SkyScan query done: ret=0  az=118.77<-7918  ze=79.995<-6667  Statuses=0009 0008
03:11:13 Msec=3000  True Az=118.77  Ze=79.995  Az status=0009  Ze status=0008
03:11:13 Check angles
03:11:13 SkyScan query
03:11:14 SkyScan query done: ret=0  az=136.215<-9081  ze=79.995<-6667  Statuses=0009 0008
03:11:14 Msec=3750  True Az=136.215  Ze=79.995  Az status=0009  Ze status=0008
03:11:14 Check angles
03:11:14 SkyScan query
03:11:15 SkyScan query done: ret=0  az=151.995<-10133  ze=79.995<-6667  Statuses=0009 0008
03:11:15 Msec=4500  True Az=151.995  Ze=79.995  Az status=0009  Ze status=0008
03:11:15 Check angles
03:11:15 SkyScan query
03:11:16 SkyScan query done: ret=0  az=151.995<-10133  ze=79.995<-6667  Statuses=0008 0008
03:11:16 Msec=5250  True Az=151.995  Ze=79.995  Az status=0008  Ze status=0008
03:11:16 Message to Master queued w/err=0: serial=119 error=0
03:11:31 Received message from Master: op=PointingHead serial=120
03:11:31 Move0 PH to az=-8.200000e+001 (-8.200000e+001)  zen=8.000000e+001 (8.000000e+001)
03:11:31 SkyScan point: az=-82->6533  ze=80->17333  Resp=0
03:11:31 Point started: ret=0
03:11:31 point_skyscan result=0
03:11:32 Check angles
03:11:32 SkyScan query
03:11:32 SkyScan query done: ret=0  az=128.79<-8586  ze=50.13<-8658  Statuses=0009 0009
03:11:32 Msec=0  True Az=128.79  Ze=50.13  Az status=0009  Ze status=0009
03:11:32 Check angles
03:11:32 SkyScan query
03:11:33 SkyScan query done: ret=0  az=111.435<-7429  ze=29.205<-10053  Statuses=0009 0009
03:11:33 Msec=750  True Az=111.435  Ze=29.205  Az status=0009  Ze status=0009
03:11:33 Check angles
03:11:33 SkyScan query
03:11:34 SkyScan query done: ret=0  az=97.98<-6532  ze=7.785<-11481  Statuses=0009 0009
03:11:34 Msec=1500  True Az=97.98  Ze=7.785  Az status=0009  Ze status=0009
03:11:34 Check angles
03:11:34 SkyScan query
03:11:34 SkyScan query done: ret=0  az=97.995<-6533  ze=-13.17<-12878  Statuses=0008 0009
03:11:34 Msec=2250  True Az=97.995  Ze=-13.17  Az status=0008  Ze status=0009
03:11:35 Check angles
03:11:35 SkyScan query
03:11:35 SkyScan query done: ret=0  az=97.995<-6533  ze=-34.125<-14275  Statuses=0008 0009
03:11:35 Msec=3000  True Az=97.995  Ze=-34.125  Az status=0008  Ze status=0009
03:11:35 Check angles
03:11:35 SkyScan query
03:11:36 SkyScan query done: ret=0  az=97.995<-6533  ze=-55.515<-15701  Statuses=0008 0009
03:11:36 Msec=3750  True Az=97.995  Ze=-55.515  Az status=0008  Ze status=0009
03:11:36 Check angles
03:11:36 SkyScan query
03:11:37 SkyScan query done: ret=0  az=97.995<-6533  ze=-76.455<-17097  Statuses=0008 0009
03:11:37 Msec=4500  True Az=97.995  Ze=-76.455  Az status=0008  Ze status=0009
03:11:37 Check angles
03:11:37 SkyScan query
03:11:37 SkyScan query done: ret=0  az=97.995<-6533  ze=-80.04<-17336  Statuses=0008 0008
03:11:37 Msec=5250  True Az=97.995  Ze=-80.04  Az status=0008  Ze status=0008
03:11:37 Message to Master queued w/err=0: serial=120 error=0
03:12:21 * END OF LOG *