01:50:22 Starting Observatory v1.63  12/8/14
01:50:22 Startup delay was 0 sec
01:50:22 Process ID=4068  UTC is 2018-4-5  01:50:22.055; local time is 2018-4-5  01:50:22.055 Coordinated Universal Time (diff=0 min)
01:50:22 High-resolution performance counter is available; frequency is 2194.510000 MHz
01:50:22 Observatory is running stand-alone
01:50:22 Reading parameter file ObservatoryControlFile.txt
01:50:22 Apparatus is type 2 (Alaska)
01:50:22 Detailed log 0
01:50:22 Pointing head type specified by Observatory control file is SkyScan
01:50:22 SkyScan model specified by Observatory control file is 0
01:50:22 Pointing head communications specified by Observatory control file via COM1
01:50:22 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
01:50:22 Corrections added to script-specified directions are az=0.000000, ze=0.000000
01:50:22 High-resolution performance counter has been disabled by Observatory control file
01:50:22 Filter type is 4
01:50:22 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
01:50:22   LASER           220            yes O 
01:50:22 Driver init  Result=78
01:50:22 Board name=""
01:50:22 Board entry="No Open Layers boards installed"
01:50:22 Board status=0
01:50:22 Get version result=0   SDK version is "V6.2.1.0"
01:50:22 Get driver version result=39   Version is "[unknown]"
01:50:22 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
01:50:22 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
01:50:22 Digital I/O configure subsystem 0 as input
01:50:22 Set data flow result=40
01:50:22 Configure result=40
01:50:22 Digital I/O configure subsystem 0 as output
01:50:22 Set data flow result=40
01:50:22 Configure result=40
01:50:24 SkyScan init: port=COM1  logFile=Observatory_20180405015022.txt  detail=0
01:50:24 Init port COM1
01:50:24 Successful CreateFile
01:50:24 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
01:50:24 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
01:50:24 SkyScan port init result=0
01:50:24 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
01:50:24 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
01:50:24 SkyScan SmartMotor 1 sw rev=25
01:50:25 SkyScan SmartMotor 2 sw rev=2
01:50:25 SkyScan SmartMotor 2 response was=2VERSION 100


01:50:25 SkyScan SmartMotor 1 (az) counts/rev=24000
01:50:25 SkyScan SmartMotor 2 (ze) counts/rev=24000
01:50:25 SkyScan initialization result=0
01:50:25 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
01:50:25 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
01:50:25 FLIList err=0  nWheels=1
01:50:25 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
01:50:25 FLIOpen err=0  dev=0
01:50:25 FLIGetHWRevision err=0  hwRev=0
01:50:25 FLIGetFWRevision err=0  fwRev=32768
01:50:25 FLIGetFilterCount err=0  nFilters=6
01:50:25 FLIGetFilterPos err=0  currentPosition=-1
01:50:25 FLIGetStepsRemaining err=0  RemainingSteps=0
01:50:25 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
01:50:25 FLIFreeList err=0
01:50:25 Observatory log will be written every 1200000 msec
01:50:32 SkyScan init: port=COM1  logFile=Observatory_20180405015022.txt  detail=0
01:50:32 Init port COM1
01:50:32 SkyScan port init result=51
01:50:32 SkyScan manual initialization result=51
01:51:35 Move1 PH to az=0.000000e+000 (0.000000e+000)  zen=4.500000e+001 (4.500000e+001)
01:51:35 SkyScan point: az=0->0  ze=45->9000  Resp=0
01:51:35 listen_skyscan result=1 from ByChars "še=0 "
01:51:35 point_skyscan result=1
01:51:36 Check angles
01:51:36 SkyScan query
01:51:36 listen_skyscan result=1 from ByChars "šRS "
01:51:36 Msec=0  True Az=-999  Ze=-999  Az status=FFFFFFFF  Ze status=FFFFFFFF
01:51:36 Error condition: state=-6 motor 2  Status=FFFFFFFF FFFFFFFF
01:52:07 * END OF LOG *