04:58:53 Starting Observatory v1.63  12/8/14
04:58:53 Startup delay was 0 sec
04:58:53 Process ID=2868  UTC is 2017-9-24  04:58:53.440; local time is 2017-9-24  04:58:53.440 Coordinated Universal Time (diff=0 min)
04:58:53 High-resolution performance counter is available; frequency is 2194.520000 MHz
04:58:53 Master has allocated shared memory
04:58:53 Reading parameter file ObservatoryControlFile.txt
04:58:53 Apparatus is type 2 (Alaska)
04:58:53 Detailed log 0
04:58:53 Pointing head type specified by Observatory control file is SkyScan
04:58:53 SkyScan model specified by Observatory control file is 0
04:58:53 Pointing head communications specified by Observatory control file via COM1
04:58:53 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
04:58:53 Corrections added to script-specified directions are az=0.000000, ze=0.000000
04:58:53 High-resolution performance counter has been disabled by Observatory control file
04:58:53 Filter type is 4
04:58:53 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
04:58:53   LASER           220            yes C 
04:58:53 Driver init  Result=78
04:58:53 Board name=""
04:58:53 Board entry="No Open Layers boards installed"
04:58:53 Board status=0
04:58:53 Get version result=0   SDK version is "V6.2.1.0"
04:58:53 Get driver version result=39   Version is "[unknown]"
04:58:53 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
04:58:53 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
04:58:53 Digital I/O configure subsystem 0 as input
04:58:53 Set data flow result=40
04:58:53 Configure result=40
04:58:53 Digital I/O configure subsystem 0 as output
04:58:53 Set data flow result=40
04:58:53 Configure result=40
04:58:55 SkyScan init: port=COM1  logFile=Observatory_20170924045853.txt  detail=0
04:58:55 Init port COM1
04:58:55 Successful CreateFile
04:58:55 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
04:58:55 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
04:58:55 SkyScan port init result=0
04:58:56 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
04:58:56 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
04:58:56 SkyScan SmartMotor 1 sw rev=25
04:58:56 SkyScan SmartMotor 2 sw rev=2
04:58:56 SkyScan SmartMotor 2 response was=2VERSION 100


04:58:56 SkyScan SmartMotor 1 (az) counts/rev=24000
04:58:56 SkyScan SmartMotor 2 (ze) counts/rev=24000
04:58:56 SkyScan initialization result=0
04:58:56 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
04:58:56 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
04:58:56 FLIList err=0  nWheels=1
04:58:56 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
04:58:56 FLIOpen err=0  dev=0
04:58:56 FLIGetHWRevision err=0  hwRev=0
04:58:56 FLIGetFWRevision err=0  fwRev=32768
04:58:56 FLIGetFilterCount err=0  nFilters=6
04:58:56 FLIGetFilterPos err=0  currentPosition=-1
04:58:56 FLIGetStepsRemaining err=0  RemainingSteps=0
04:58:56 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
04:58:56 FLIFreeList err=0
04:58:56 Observatory log will be written every 1200000 msec
04:58:57 Received message from Master: op=Identify serial=111
04:59:37 * END OF LOG *