02:51:53 Starting Observatory v1.63  12/8/14
02:51:53 Startup delay was 5 sec
02:51:53 Process ID=524  UTC is 2017-2-22  02:51:53.984; local time is 2017-2-22  02:51:53.984 Coordinated Universal Time (diff=0 min)
02:51:53 High-resolution performance counter is available; frequency is 2194.510000 MHz
02:51:53 Master has allocated shared memory
02:51:54 Reading parameter file ObservatoryControlFile.txt
02:51:54 Apparatus is type 2 (Alaska)
02:51:54 Detailed log 0
02:51:54 Pointing head type specified by Observatory control file is SkyScan
02:51:54 SkyScan model specified by Observatory control file is 0
02:51:54 Pointing head communications specified by Observatory control file via COM1
02:51:54 Station #5 location is lat=65.119000 deg N long=-147.430000 deg E  ht=200.000000 m
02:51:54 Corrections added to script-specified directions are az=0.000000, ze=0.000000
02:51:54 High-resolution performance counter has been disabled by Observatory control file
02:51:54 Filter type is 4
02:51:54 Name    Serial number Ry# Available? State  pRelay    1/0 USB shutters/relays specified
02:51:54   LASER           220            yes C 
02:51:54 Driver init  Result=78
02:51:54 Board name=""
02:51:54 Board entry="No Open Layers boards installed"
02:51:54 Board status=0
02:51:54 Get version result=0   SDK version is "V6.2.1.0"
02:51:54 Get driver version result=39   Version is "[unknown]"
02:51:54 Subsystem enumeration: nAD=0 nDA=0 nDIn=0 nDOut=0 nCtrTim=0 nDIOBits=0
02:51:54 Unknown digital I/O for this board; expected DT-302 (3 ports, configurable) or DT-9812 (2 ports, fixed) type
02:51:54 Digital I/O configure subsystem 0 as input
02:51:54 Set data flow result=40
02:51:54 Configure result=40
02:51:54 Digital I/O configure subsystem 0 as output
02:51:54 Set data flow result=40
02:51:54 Configure result=40
02:51:59 SkyScan init: port=COM1  logFile=Observatory_20170222025153.txt  detail=0
02:51:59 Init port COM1
02:51:59 Successful CreateFile
02:51:59 SetPortParameters: baud=9600  size=8  parity=0  stop=0  charTime=1042 usec
02:51:59 Successful SetCommTimeouts  ReadIntervalTimeout=104 ReadTotalTimeoutMultiplier=20  ReadTotalTimeoutConstant=10
02:51:59 SkyScan port init result=0
02:52:00 SkyScan SmartMotor 1 sample rate/firmware version result=0,10012 "24576/440C 
"
02:52:00 SkyScan SmartMotor 2 sample rate/firmware version result=0,10012 "24576/440C 
"
02:52:00 SkyScan SmartMotor 1 sw rev=25
02:52:00 SkyScan SmartMotor 2 sw rev=2
02:52:00 SkyScan SmartMotor 2 response was=2VERSION 100


02:52:00 SkyScan SmartMotor 1 (az) counts/rev=24000
02:52:00 SkyScan SmartMotor 2 (ze) counts/rev=24000
02:52:00 SkyScan initialization result=0
02:52:03 FilterWheelInit: FLISetDebugLevel err=0 debugFilepath is C:\PKZPrograms\FliDebug.txt  Level=7
02:52:03 FLIGetLibVersion err=0  Lib vn=Software Development Library for Windows 1.104
02:52:03 FLIList err=0  nWheels=1
02:52:03 Wheel 0 filename="flifil0"  modelName="CFW-6-6"
02:52:03 FLIOpen err=0  dev=0
02:52:03 FLIGetHWRevision err=0  hwRev=0
02:52:03 FLIGetFWRevision err=0  fwRev=32768
02:52:03 FLIGetFilterCount err=0  nFilters=6
02:52:03 FLIGetFilterPos err=0  currentPosition=-1
02:52:03 FLIGetStepsRemaining err=0  RemainingSteps=0
02:52:03 FilterWheelPositionGet err=0  currentPosition=-1 remaining steps=0
02:52:03 FLIFreeList err=0
02:52:03 Observatory log will be written every 1200000 msec
02:52:03 Received message from Master: op=Identify serial=111
02:52:07 * END OF LOG *