[UTC 2019-3-18  14:31:20]
14:31:20 Received message from Master: op=Log open serial=343657
14:31:20 Log file open: Observatory  C:\PKZPrograms\Logs\20190317 \ PKZ20190318143120_Observatory.txt
14:31:20 Previous log file: 
14:31:24 Received message from Master: op=Log directory change serial=343659
14:31:24 Log file directory changed from C:\PKZPrograms\Logs\20190317 to C:\PKZPrograms\Logs\20190318
14:31:24 Log file name is PKZ20190318143124_Observatory.txt
14:33:35 Received message from Master: op=Identify serial=343667
14:43:35 No messages received for 10 min. 3824 sent since last one of these.
14:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
14:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
14:43:35 MsgArea S: 
[UTC 2019-3-18  14:43:48]
14:53:35 No messages received for 10 min. 0 sent since last one of these.
14:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
14:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
14:53:35 MsgArea S: 
15:03:35 No messages received for 10 min. 0 sent since last one of these.
15:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
15:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
15:03:35 MsgArea S: 
[UTC 2019-3-18  15:03:48]
15:13:35 No messages received for 10 min. 0 sent since last one of these.
15:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
15:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
15:13:35 MsgArea S: 
15:23:35 No messages received for 10 min. 0 sent since last one of these.
15:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
15:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
15:23:35 MsgArea S: 
[UTC 2019-3-18  15:23:48]
15:33:35 No messages received for 10 min. 0 sent since last one of these.
15:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
15:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
15:33:35 MsgArea S: 
15:43:35 No messages received for 10 min. 0 sent since last one of these.
15:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
15:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
15:43:35 MsgArea S: 
[UTC 2019-3-18  15:43:48]
15:53:35 No messages received for 10 min. 0 sent since last one of these.
15:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
15:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
15:53:35 MsgArea S: 
16:03:35 No messages received for 10 min. 0 sent since last one of these.
16:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
16:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
16:03:35 MsgArea S: 
[UTC 2019-3-18  16:03:48]
16:13:35 No messages received for 10 min. 0 sent since last one of these.
16:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
16:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
16:13:35 MsgArea S: 
16:23:35 No messages received for 10 min. 0 sent since last one of these.
16:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
16:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
16:23:35 MsgArea S: 
[UTC 2019-3-18  16:23:48]
16:33:35 No messages received for 10 min. 0 sent since last one of these.
16:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
16:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
16:33:35 MsgArea S: 
16:43:35 No messages received for 10 min. 0 sent since last one of these.
16:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
16:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
16:43:35 MsgArea S: 
[UTC 2019-3-18  16:43:48]
16:53:35 No messages received for 10 min. 0 sent since last one of these.
16:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
16:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
16:53:35 MsgArea S: 
17:03:35 No messages received for 10 min. 0 sent since last one of these.
17:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
17:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
17:03:35 MsgArea S: 
[UTC 2019-3-18  17:03:48]
17:13:35 No messages received for 10 min. 0 sent since last one of these.
17:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
17:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
17:13:35 MsgArea S: 
17:23:35 No messages received for 10 min. 0 sent since last one of these.
17:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
17:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
17:23:35 MsgArea S: 
[UTC 2019-3-18  17:23:48]
17:33:35 No messages received for 10 min. 0 sent since last one of these.
17:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
17:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
17:33:35 MsgArea S: 
17:43:35 No messages received for 10 min. 0 sent since last one of these.
17:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
17:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
17:43:35 MsgArea S: 
[UTC 2019-3-18  17:43:48]
17:53:35 No messages received for 10 min. 0 sent since last one of these.
17:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
17:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
17:53:35 MsgArea S: 
18:03:35 No messages received for 10 min. 0 sent since last one of these.
18:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
18:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
18:03:35 MsgArea S: 
[UTC 2019-3-18  18:03:48]
18:13:35 No messages received for 10 min. 0 sent since last one of these.
18:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
18:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
18:13:35 MsgArea S: 
18:23:35 No messages received for 10 min. 0 sent since last one of these.
18:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
18:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
18:23:35 MsgArea S: 
[UTC 2019-3-18  18:23:48]
18:33:35 No messages received for 10 min. 0 sent since last one of these.
18:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
18:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
18:33:35 MsgArea S: 
18:43:35 No messages received for 10 min. 0 sent since last one of these.
18:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
18:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
18:43:35 MsgArea S: 
[UTC 2019-3-18  18:43:48]
18:53:35 No messages received for 10 min. 0 sent since last one of these.
18:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
18:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
18:53:35 MsgArea S: 
19:03:35 No messages received for 10 min. 0 sent since last one of these.
19:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
19:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
19:03:35 MsgArea S: 
[UTC 2019-3-18  19:03:48]
19:13:35 No messages received for 10 min. 0 sent since last one of these.
19:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
19:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
19:13:35 MsgArea S: 
19:23:35 No messages received for 10 min. 0 sent since last one of these.
19:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
19:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
19:23:35 MsgArea S: 
[UTC 2019-3-18  19:23:48]
19:33:35 No messages received for 10 min. 0 sent since last one of these.
19:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
19:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
19:33:35 MsgArea S: 
19:43:35 No messages received for 10 min. 0 sent since last one of these.
19:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
19:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
19:43:35 MsgArea S: 
[UTC 2019-3-18  19:43:48]
19:53:35 No messages received for 10 min. 0 sent since last one of these.
19:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
19:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
19:53:35 MsgArea S: 
20:03:35 No messages received for 10 min. 0 sent since last one of these.
20:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
20:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
20:03:35 MsgArea S: 
[UTC 2019-3-18  20:03:48]
20:13:35 No messages received for 10 min. 0 sent since last one of these.
20:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
20:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
20:13:35 MsgArea S: 
20:23:35 No messages received for 10 min. 0 sent since last one of these.
20:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
20:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
20:23:35 MsgArea S: 
[UTC 2019-3-18  20:23:48]
20:33:35 No messages received for 10 min. 0 sent since last one of these.
20:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
20:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
20:33:35 MsgArea S: 
20:43:35 No messages received for 10 min. 0 sent since last one of these.
20:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
20:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
20:43:35 MsgArea S: 
[UTC 2019-3-18  20:43:48]
20:53:35 No messages received for 10 min. 0 sent since last one of these.
20:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
20:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
20:53:35 MsgArea S: 
21:03:35 No messages received for 10 min. 0 sent since last one of these.
21:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
21:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
21:03:35 MsgArea S: 
[UTC 2019-3-18  21:03:48]
21:13:35 No messages received for 10 min. 0 sent since last one of these.
21:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
21:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
21:13:35 MsgArea S: 
21:23:35 No messages received for 10 min. 0 sent since last one of these.
21:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
21:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
21:23:35 MsgArea S: 
[UTC 2019-3-18  21:23:48]
21:33:35 No messages received for 10 min. 0 sent since last one of these.
21:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
21:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
21:33:35 MsgArea S: 
21:43:35 No messages received for 10 min. 0 sent since last one of these.
21:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
21:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
21:43:35 MsgArea S: 
[UTC 2019-3-18  21:43:48]
21:53:35 No messages received for 10 min. 0 sent since last one of these.
21:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
21:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
21:53:35 MsgArea S: 
22:03:35 No messages received for 10 min. 0 sent since last one of these.
22:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
22:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
22:03:35 MsgArea S: 
[UTC 2019-3-18  22:03:48]
22:13:35 No messages received for 10 min. 0 sent since last one of these.
22:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
22:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
22:13:35 MsgArea S: 
22:23:35 No messages received for 10 min. 0 sent since last one of these.
22:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
22:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
22:23:35 MsgArea S: 
[UTC 2019-3-18  22:23:48]
22:33:35 No messages received for 10 min. 0 sent since last one of these.
22:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
22:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
22:33:35 MsgArea S: 
22:43:35 No messages received for 10 min. 0 sent since last one of these.
22:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
22:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
22:43:35 MsgArea S: 
[UTC 2019-3-18  22:43:48]
22:53:35 No messages received for 10 min. 0 sent since last one of these.
22:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
22:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
22:53:35 MsgArea S: 
23:03:35 No messages received for 10 min. 0 sent since last one of these.
23:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
23:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
23:03:35 MsgArea S: 
[UTC 2019-3-18  23:03:48]
23:13:35 No messages received for 10 min. 0 sent since last one of these.
23:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
23:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
23:13:35 MsgArea S: 
23:23:35 No messages received for 10 min. 0 sent since last one of these.
23:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
23:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
23:23:35 MsgArea S: 
[UTC 2019-3-18  23:23:48]
23:33:35 No messages received for 10 min. 0 sent since last one of these.
23:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
23:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
23:33:35 MsgArea S: 
23:43:35 No messages received for 10 min. 0 sent since last one of these.
23:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
23:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
23:43:35 MsgArea S: 
[UTC 2019-3-18  23:43:48]
23:53:35 No messages received for 10 min. 0 sent since last one of these.
23:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
23:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
23:53:35 MsgArea S: 
00:03:35 No messages received for 10 min. 0 sent since last one of these.
00:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
00:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
00:03:35 MsgArea S: 
[UTC 2019-3-19  00:03:48]
00:13:35 No messages received for 10 min. 0 sent since last one of these.
00:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
00:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
00:13:35 MsgArea S: 
00:23:35 No messages received for 10 min. 0 sent since last one of these.
00:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
00:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
00:23:35 MsgArea S: 
[UTC 2019-3-19  00:23:48]
00:33:35 No messages received for 10 min. 0 sent since last one of these.
00:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
00:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
00:33:35 MsgArea S: 
00:43:35 No messages received for 10 min. 0 sent since last one of these.
00:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
00:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
00:43:35 MsgArea S: 
[UTC 2019-3-19  00:43:48]
00:53:35 No messages received for 10 min. 0 sent since last one of these.
00:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
00:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
00:53:35 MsgArea S: 
01:03:35 No messages received for 10 min. 0 sent since last one of these.
01:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
01:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
01:03:35 MsgArea S: 
[UTC 2019-3-19  01:03:48]
01:13:35 No messages received for 10 min. 0 sent since last one of these.
01:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
01:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
01:13:35 MsgArea S: 
01:23:35 No messages received for 10 min. 0 sent since last one of these.
01:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
01:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
01:23:35 MsgArea S: 
[UTC 2019-3-19  01:23:48]
01:33:35 No messages received for 10 min. 0 sent since last one of these.
01:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
01:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
01:33:35 MsgArea S: 
01:43:35 No messages received for 10 min. 0 sent since last one of these.
01:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
01:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
01:43:35 MsgArea S: 
[UTC 2019-3-19  01:43:48]
01:53:35 No messages received for 10 min. 0 sent since last one of these.
01:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
01:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
01:53:35 MsgArea S: 
02:03:35 No messages received for 10 min. 0 sent since last one of these.
02:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
02:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
02:03:35 MsgArea S: 
[UTC 2019-3-19  02:03:48]
02:13:35 No messages received for 10 min. 0 sent since last one of these.
02:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
02:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
02:13:35 MsgArea S: 
02:23:35 No messages received for 10 min. 0 sent since last one of these.
02:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
02:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
02:23:35 MsgArea S: 
[UTC 2019-3-19  02:23:48]
02:33:35 No messages received for 10 min. 0 sent since last one of these.
02:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
02:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
02:33:35 MsgArea S: 
02:43:35 No messages received for 10 min. 0 sent since last one of these.
02:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
02:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
02:43:35 MsgArea S: 
[UTC 2019-3-19  02:43:48]
02:53:35 No messages received for 10 min. 0 sent since last one of these.
02:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
02:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
02:53:35 MsgArea S: 
03:03:35 No messages received for 10 min. 0 sent since last one of these.
03:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
03:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
03:03:35 MsgArea S: 
[UTC 2019-3-19  03:03:48]
03:13:35 No messages received for 10 min. 0 sent since last one of these.
03:13:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
03:13:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
03:13:35 MsgArea S: 
03:23:35 No messages received for 10 min. 0 sent since last one of these.
03:23:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
03:23:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
03:23:35 MsgArea S: 
[UTC 2019-3-19  03:23:48]
03:33:35 No messages received for 10 min. 0 sent since last one of these.
03:33:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
03:33:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
03:33:35 MsgArea S: 
03:43:35 No messages received for 10 min. 0 sent since last one of these.
03:43:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
03:43:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
03:43:35 MsgArea S: 
[UTC 2019-3-19  03:43:48]
03:53:35 No messages received for 10 min. 0 sent since last one of these.
03:53:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
03:53:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
03:53:35 MsgArea S: 
04:03:35 No messages received for 10 min. 0 sent since last one of these.
04:03:35 MsgArea H: nextMessageSerial=343670  startMsgs=68  nextFree=17340  maxMsg=65468
04:03:35 MsgArea Q: Master=16728:17136  Camera=-1:-1  Observatory=-1:-1  Communicate=408:408  Analyze=-1:-1
04:03:35 MsgArea S: 
[UTC 2019-3-19  04:03:48]
04:08:56 Received message from Master: op=PointingHead serial=343671
04:08:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:08:56 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:08:57 Point started: ret=0
04:08:57 point_skyscan result=0
04:08:57 Check angles
04:08:57 SkyScan query
04:08:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:08:58 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:08:58 Message to Master queued w/err=0: serial=343671 error=0
04:09:03 Received message from Master: op=Filter serial=343672
04:09:03 Color wheel filter change from 2 to 2
04:09:03 FLIGetFilterPos err=0  currentPosition=2
04:09:03 FLIGetStepsRemaining err=0  RemainingSteps=0
04:09:03 Filter is already there-color wheel unchanged
04:09:03 Received message from Master: op=Shutter serial=343673
04:09:03 Shutter LASER close
04:09:05 Received message from Camera: op=State serial=343675
04:09:05 GetSingleValue result=40  Value=cccccccc
04:09:05 SkyScan query
04:09:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:09:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:05 Parameters OK
04:09:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:05 Set A/D data flow result=40
04:09:05 Set A/D channel type result=40
04:09:05 Set A/D encoding result=40
04:09:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:05 Set channel filter=0.000000e+000  result=40
04:09:05 Config A/D  Result=40
04:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:05 Get A/D filter: -9.255963e+061  result=40
04:09:05 Get A/D value=-858993460  result=40
04:09:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:05 Parameters OK
04:09:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:05 Set A/D data flow result=40
04:09:05 Set A/D channel type result=40
04:09:05 Set A/D encoding result=40
04:09:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:05 Set channel filter=0.000000e+000  result=40
04:09:05 Config A/D  Result=40
04:09:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:05 Get A/D filter: -9.255963e+061  result=40
04:09:05 Get A/D value=-858993460  result=40
04:09:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:09:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:09:05 Aux=
04:09:05 Message to Camera, serial 343675 queued
04:09:11 Received message from Master: op=PointingHead serial=343686
04:09:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:09:11 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:09:11 Point started: ret=0
04:09:11 point_skyscan result=0
04:09:12 Check angles
04:09:12 SkyScan query
04:09:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:09:13 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:09:13 Message to Master queued w/err=0: serial=343686 error=0
04:09:18 Received message from Master: op=Filter serial=343687
04:09:18 Color wheel filter change from 2 to 2
04:09:18 FLIGetFilterPos err=0  currentPosition=2
04:09:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:09:18 Filter is already there-color wheel unchanged
04:09:18 Received message from Master: op=Shutter serial=343688
04:09:18 Shutter LASER close
04:09:18 Received message from Camera: op=State serial=343690
04:09:18 GetSingleValue result=40  Value=cccccccc
04:09:18 SkyScan query
04:09:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:09:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:19 Parameters OK
04:09:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:19 Set A/D data flow result=40
04:09:19 Set A/D channel type result=40
04:09:19 Set A/D encoding result=40
04:09:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:19 Set channel filter=0.000000e+000  result=40
04:09:19 Config A/D  Result=40
04:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:19 Get A/D filter: -9.255963e+061  result=40
04:09:19 Get A/D value=-858993460  result=40
04:09:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:19 Parameters OK
04:09:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:19 Set A/D data flow result=40
04:09:19 Set A/D channel type result=40
04:09:19 Set A/D encoding result=40
04:09:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:19 Set channel filter=0.000000e+000  result=40
04:09:19 Config A/D  Result=40
04:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:19 Get A/D filter: -9.255963e+061  result=40
04:09:19 Get A/D value=-858993460  result=40
04:09:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:09:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:09:19 Aux=
04:09:19 Message to Camera, serial 343690 queued
04:09:54 Received message from Master: op=PointingHead serial=343702
04:09:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:09:54 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:09:55 Point started: ret=0
04:09:55 point_skyscan result=0
04:09:56 Check angles
04:09:56 SkyScan query
04:09:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:09:56 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:09:56 Message to Master queued w/err=0: serial=343702 error=0
04:10:01 Received message from Master: op=Filter serial=343703
04:10:01 Color wheel filter change from 2 to 2
04:10:01 FLIGetFilterPos err=0  currentPosition=2
04:10:01 FLIGetStepsRemaining err=0  RemainingSteps=0
04:10:01 Filter is already there-color wheel unchanged
04:10:01 Received message from Master: op=Shutter serial=343704
04:10:01 Shutter LASER open
04:10:01 Received message from Camera: op=State serial=343706
04:10:01 GetSingleValue result=40  Value=cccccccc
04:10:01 SkyScan query
04:10:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:10:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:02 Parameters OK
04:10:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:02 Set A/D data flow result=40
04:10:02 Set A/D channel type result=40
04:10:02 Set A/D encoding result=40
04:10:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:02 Set channel filter=0.000000e+000  result=40
04:10:02 Config A/D  Result=40
04:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:02 Get A/D filter: -9.255963e+061  result=40
04:10:02 Get A/D value=-858993460  result=40
04:10:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:02 Parameters OK
04:10:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:02 Set A/D data flow result=40
04:10:02 Set A/D channel type result=40
04:10:02 Set A/D encoding result=40
04:10:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:02 Set channel filter=0.000000e+000  result=40
04:10:02 Config A/D  Result=40
04:10:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:02 Get A/D filter: -9.255963e+061  result=40
04:10:02 Get A/D value=-858993460  result=40
04:10:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:10:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:10:02 Aux=
04:10:02 Message to Camera, serial 343706 queued
04:10:11 Received message from Master: op=Shutter serial=343716
04:10:11 Shutter LASER close
04:10:11 Received message from Master: op=PointingHead serial=343720
04:10:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:10:11 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:10:11 Point started: ret=0
04:10:11 point_skyscan result=0
04:10:12 Check angles
04:10:12 SkyScan query
04:10:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:10:13 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:10:13 Message to Master queued w/err=0: serial=343720 error=0
04:10:18 Received message from Master: op=Filter serial=343721
04:10:18 Color wheel filter change from 2 to 2
04:10:18 FLIGetFilterPos err=0  currentPosition=2
04:10:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:10:18 Filter is already there-color wheel unchanged
04:10:18 Received message from Master: op=Shutter serial=343722
04:10:18 Shutter LASER close
04:10:18 Received message from Camera: op=State serial=343724
04:10:18 GetSingleValue result=40  Value=cccccccc
04:10:18 SkyScan query
04:10:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:19 Parameters OK
04:10:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:19 Set A/D data flow result=40
04:10:19 Set A/D channel type result=40
04:10:19 Set A/D encoding result=40
04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:19 Set channel filter=0.000000e+000  result=40
04:10:19 Config A/D  Result=40
04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:19 Get A/D filter: -9.255963e+061  result=40
04:10:19 Get A/D value=-858993460  result=40
04:10:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:19 Parameters OK
04:10:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:19 Set A/D data flow result=40
04:10:19 Set A/D channel type result=40
04:10:19 Set A/D encoding result=40
04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:19 Set channel filter=0.000000e+000  result=40
04:10:19 Config A/D  Result=40
04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:19 Get A/D filter: -9.255963e+061  result=40
04:10:19 Get A/D value=-858993460  result=40
04:10:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:10:19 Aux=
04:10:19 Message to Camera, serial 343724 queued
04:10:26 Received message from Master: op=PointingHead serial=343736
04:10:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:10:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:10:27 Point started: ret=0
04:10:27 point_skyscan result=0
04:10:28 Check angles
04:10:28 SkyScan query
04:10:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.92<-21528  Statuses=0008 0009
04:10:28 Msec=0  True Az=112.995  Ze=-142.92  Az status=0008  Ze status=0009
04:10:28 Check angles
04:10:28 SkyScan query
04:10:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
04:10:29 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
04:10:29 Check angles
04:10:29 SkyScan query
04:10:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.025<-18735  Statuses=0008 0009
04:10:30 Msec=1500  True Az=112.995  Ze=-101.025  Az status=0008  Ze status=0009
04:10:30 Check angles
04:10:30 SkyScan query
04:10:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.07<-17338  Statuses=0008 0009
04:10:30 Msec=2250  True Az=112.995  Ze=-80.07  Az status=0008  Ze status=0009
04:10:31 Check angles
04:10:31 SkyScan query
04:10:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.115<-15941  Statuses=0008 0009
04:10:31 Msec=3000  True Az=112.995  Ze=-59.115  Az status=0008  Ze status=0009
04:10:31 Check angles
04:10:31 SkyScan query
04:10:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.13<-14542  Statuses=0008 0009
04:10:32 Msec=3750  True Az=112.995  Ze=-38.13  Az status=0008  Ze status=0009
04:10:32 Check angles
04:10:32 SkyScan query
04:10:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
04:10:33 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
04:10:33 Check angles
04:10:33 SkyScan query
04:10:33 SkyScan query done: ret=0  az=112.995<-7533  ze=3.78<-11748  Statuses=0008 0009
04:10:33 Msec=5250  True Az=112.995  Ze=3.78  Az status=0008  Ze status=0009
04:10:34 Check angles
04:10:34 SkyScan query
04:10:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:10:34 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:10:34 Message to Master queued w/err=0: serial=343736 error=0
04:10:39 Received message from Master: op=Filter serial=343737
04:10:39 Color wheel filter change from 2 to 0
04:10:39 FLIGetFilterPos err=0  currentPosition=2
04:10:39 FLIGetStepsRemaining err=0  RemainingSteps=0
04:10:45 FLISetFilterPos err=0  rqPosition=0
04:10:45 FLIGetStepsRemaining err=0  RemainingSteps=0
04:10:45 Check after 0.00 sec for filter wheel  DIn/CWh=0
04:10:45 FLIGetFilterPos err=0  currentPosition=0
04:10:45 FLIGetStepsRemaining err=0  RemainingSteps=0
04:10:45 Received message from Master: op=Shutter serial=343738
04:10:45 Shutter LASER close
04:10:46 Received message from Camera: op=State serial=343740
04:10:46 GetSingleValue result=40  Value=cccccccc
04:10:46 SkyScan query
04:10:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:10:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:46 Parameters OK
04:10:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:46 Set A/D data flow result=40
04:10:46 Set A/D channel type result=40
04:10:46 Set A/D encoding result=40
04:10:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:46 Set channel filter=0.000000e+000  result=40
04:10:46 Config A/D  Result=40
04:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:46 Get A/D filter: -9.255963e+061  result=40
04:10:46 Get A/D value=-858993460  result=40
04:10:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:46 Parameters OK
04:10:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:46 Set A/D data flow result=40
04:10:46 Set A/D channel type result=40
04:10:46 Set A/D encoding result=40
04:10:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:46 Set channel filter=0.000000e+000  result=40
04:10:46 Config A/D  Result=40
04:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:46 Get A/D filter: -9.255963e+061  result=40
04:10:46 Get A/D value=-858993460  result=40
04:10:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:10:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:10:46 Aux=
04:10:46 Message to Camera, serial 343740 queued
04:11:23 Received message from Master: op=PointingHead serial=343753
04:11:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:11:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:11:23 Point started: ret=0
04:11:23 point_skyscan result=0
04:11:24 Check angles
04:11:24 SkyScan query
04:11:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:11:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:11:25 Message to Master queued w/err=0: serial=343753 error=0
04:11:30 Received message from Master: op=Filter serial=343754
04:11:30 Color wheel filter change from 0 to 0
04:11:30 FLIGetFilterPos err=0  currentPosition=0
04:11:30 FLIGetStepsRemaining err=0  RemainingSteps=0
04:11:30 Filter is already there-color wheel unchanged
04:11:30 Received message from Master: op=Shutter serial=343755
04:11:30 Shutter LASER close
04:11:30 Received message from Camera: op=State serial=343757
04:11:30 GetSingleValue result=40  Value=cccccccc
04:11:30 SkyScan query
04:11:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:11:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:11:30 Parameters OK
04:11:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:11:30 Set A/D data flow result=40
04:11:30 Set A/D channel type result=40
04:11:30 Set A/D encoding result=40
04:11:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:11:30 Set channel filter=0.000000e+000  result=40
04:11:30 Config A/D  Result=40
04:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:11:30 Get A/D filter: -9.255963e+061  result=40
04:11:30 Get A/D value=-858993460  result=40
04:11:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:11:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:11:30 Parameters OK
04:11:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:11:30 Set A/D data flow result=40
04:11:30 Set A/D channel type result=40
04:11:30 Set A/D encoding result=40
04:11:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:11:30 Set channel filter=0.000000e+000  result=40
04:11:30 Config A/D  Result=40
04:11:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:11:30 Get A/D filter: -9.255963e+061  result=40
04:11:30 Get A/D value=-858993460  result=40
04:11:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:11:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:11:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:11:30 Aux=
04:11:30 Message to Camera, serial 343757 queued
04:12:07 Received message from Master: op=PointingHead serial=343770
04:12:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:12:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:12:08 Point started: ret=0
04:12:08 point_skyscan result=0
04:12:08 Check angles
04:12:08 SkyScan query
04:12:09 SkyScan query done: ret=0  az=135.765<-9051  ze=-6.51<-12434  Statuses=0009 0008
04:12:09 Msec=0  True Az=135.765  Ze=-6.51  Az status=0009  Ze status=0008
04:12:09 Check angles
04:12:09 SkyScan query
04:12:10 SkyScan query done: ret=0  az=153.27<-10218  ze=-6.495<-12433  Statuses=0009 0008
04:12:10 Msec=750  True Az=153.27  Ze=-6.495  Az status=0009  Ze status=0008
04:12:10 Check angles
04:12:10 SkyScan query
04:12:10 SkyScan query done: ret=0  az=170.67<-11378  ze=-6.495<-12433  Statuses=0009 0008
04:12:10 Msec=1500  True Az=170.67  Ze=-6.495  Az status=0009  Ze status=0008
04:12:11 Check angles
04:12:11 SkyScan query
04:12:11 SkyScan query done: ret=0  az=176.01<-11734  ze=-6.495<-12433  Statuses=0008 0008
04:12:11 Msec=2250  True Az=176.01  Ze=-6.495  Az status=0008  Ze status=0008
04:12:11 Message to Master queued w/err=0: serial=343770 error=0
04:12:16 Received message from Master: op=Filter serial=343771
04:12:16 Color wheel filter change from 0 to 0
04:12:16 FLIGetFilterPos err=0  currentPosition=0
04:12:16 FLIGetStepsRemaining err=0  RemainingSteps=0
04:12:16 Filter is already there-color wheel unchanged
04:12:16 Received message from Master: op=Shutter serial=343772
04:12:16 Shutter LASER close
04:12:16 Received message from Camera: op=State serial=343774
04:12:16 GetSingleValue result=40  Value=cccccccc
04:12:16 SkyScan query
04:12:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:12:17 Parameters OK
04:12:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:12:17 Set A/D data flow result=40
04:12:17 Set A/D channel type result=40
04:12:17 Set A/D encoding result=40
04:12:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:12:17 Set channel filter=0.000000e+000  result=40
04:12:17 Config A/D  Result=40
04:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:12:17 Get A/D filter: -9.255963e+061  result=40
04:12:17 Get A/D value=-858993460  result=40
04:12:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:12:17 Parameters OK
04:12:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:12:17 Set A/D data flow result=40
04:12:17 Set A/D channel type result=40
04:12:17 Set A/D encoding result=40
04:12:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:12:17 Set channel filter=0.000000e+000  result=40
04:12:17 Config A/D  Result=40
04:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:12:17 Get A/D filter: -9.255963e+061  result=40
04:12:17 Get A/D value=-858993460  result=40
04:12:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:12:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:12:17 Aux=
04:12:17 Message to Camera, serial 343774 queued
04:12:54 Received message from Master: op=PointingHead serial=343787
04:12:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:12:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:12:54 Point started: ret=0
04:12:54 point_skyscan result=0
04:12:55 Check angles
04:12:55 SkyScan query
04:12:56 SkyScan query done: ret=0  az=152.61<-10174  ze=6.51<-11566  Statuses=0009 0008
04:12:56 Msec=0  True Az=152.61  Ze=6.51  Az status=0009  Ze status=0008
04:12:56 Check angles
04:12:56 SkyScan query
04:12:56 SkyScan query done: ret=0  az=135.195<-9013  ze=6.495<-11567  Statuses=0009 0008
04:12:56 Msec=750  True Az=135.195  Ze=6.495  Az status=0009  Ze status=0008
04:12:56 Check angles
04:12:56 SkyScan query
04:12:57 SkyScan query done: ret=0  az=117.735<-7849  ze=6.495<-11567  Statuses=0009 0008
04:12:57 Msec=1500  True Az=117.735  Ze=6.495  Az status=0009  Ze status=0008
04:12:57 Check angles
04:12:57 SkyScan query
04:12:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:12:58 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:12:58 Message to Master queued w/err=0: serial=343787 error=0
04:13:03 Received message from Master: op=Filter serial=343788
04:13:03 Color wheel filter change from 0 to 0
04:13:03 FLIGetFilterPos err=0  currentPosition=0
04:13:03 FLIGetStepsRemaining err=0  RemainingSteps=0
04:13:03 Filter is already there-color wheel unchanged
04:13:03 Received message from Master: op=Shutter serial=343789
04:13:03 Shutter LASER close
04:13:03 Received message from Camera: op=State serial=343791
04:13:03 GetSingleValue result=40  Value=cccccccc
04:13:03 SkyScan query
04:13:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:13:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:04 Parameters OK
04:13:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:04 Set A/D data flow result=40
04:13:04 Set A/D channel type result=40
04:13:04 Set A/D encoding result=40
04:13:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:04 Set channel filter=0.000000e+000  result=40
04:13:04 Config A/D  Result=40
04:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:04 Get A/D filter: -9.255963e+061  result=40
04:13:04 Get A/D value=-858993460  result=40
04:13:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:04 Parameters OK
04:13:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:04 Set A/D data flow result=40
04:13:04 Set A/D channel type result=40
04:13:04 Set A/D encoding result=40
04:13:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:04 Set channel filter=0.000000e+000  result=40
04:13:04 Config A/D  Result=40
04:13:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:04 Get A/D filter: -9.255963e+061  result=40
04:13:04 Get A/D value=-858993460  result=40
04:13:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:13:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:13:04 Aux=
04:13:04 Message to Camera, serial 343791 queued
04:13:40 Received message from Master: op=PointingHead serial=343804
04:13:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:13:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:13:41 Point started: ret=0
04:13:41 point_skyscan result=0
04:13:42 Check angles
04:13:42 SkyScan query
04:13:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
04:13:42 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
04:13:42 Check angles
04:13:42 SkyScan query
04:13:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.865<-14991  Statuses=0008 0009
04:13:43 Msec=750  True Az=112.995  Ze=-44.865  Az status=0008  Ze status=0009
04:13:43 Check angles
04:13:43 SkyScan query
04:13:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.79<-16386  Statuses=0008 0009
04:13:44 Msec=1500  True Az=112.995  Ze=-65.79  Az status=0008  Ze status=0009
04:13:44 Check angles
04:13:44 SkyScan query
04:13:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.76<-17784  Statuses=0008 0009
04:13:44 Msec=2250  True Az=112.995  Ze=-86.76  Az status=0008  Ze status=0009
04:13:45 Check angles
04:13:45 SkyScan query
04:13:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.15<-19210  Statuses=0008 0009
04:13:45 Msec=3000  True Az=112.995  Ze=-108.15  Az status=0008  Ze status=0009
04:13:45 Check angles
04:13:45 SkyScan query
04:13:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.09<-20606  Statuses=0008 0009
04:13:46 Msec=3750  True Az=112.995  Ze=-129.09  Az status=0008  Ze status=0009
04:13:46 Check angles
04:13:46 SkyScan query
04:13:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.045<-22003  Statuses=0008 0009
04:13:47 Msec=4500  True Az=112.995  Ze=-150.045  Az status=0008  Ze status=0009
04:13:47 Check angles
04:13:47 SkyScan query
04:13:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.24<-23416  Statuses=0008 0009
04:13:47 Msec=5250  True Az=112.995  Ze=-171.24  Az status=0008  Ze status=0009
04:13:48 Check angles
04:13:48 SkyScan query
04:13:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:13:48 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:13:48 Message to Master queued w/err=0: serial=343804 error=0
04:13:53 Received message from Master: op=Filter serial=343805
04:13:53 Color wheel filter change from 0 to 0
04:13:53 FLIGetFilterPos err=0  currentPosition=0
04:13:53 FLIGetStepsRemaining err=0  RemainingSteps=0
04:13:53 Filter is already there-color wheel unchanged
04:13:53 Received message from Master: op=Shutter serial=343806
04:13:53 Shutter LASER open
04:13:53 Received message from Camera: op=State serial=343808
04:13:53 GetSingleValue result=40  Value=cccccccc
04:13:53 SkyScan query
04:13:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:13:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:54 Parameters OK
04:13:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:54 Set A/D data flow result=40
04:13:54 Set A/D channel type result=40
04:13:54 Set A/D encoding result=40
04:13:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:54 Set channel filter=0.000000e+000  result=40
04:13:54 Config A/D  Result=40
04:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:54 Get A/D filter: -9.255963e+061  result=40
04:13:54 Get A/D value=-858993460  result=40
04:13:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:54 Parameters OK
04:13:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:54 Set A/D data flow result=40
04:13:54 Set A/D channel type result=40
04:13:54 Set A/D encoding result=40
04:13:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:54 Set channel filter=0.000000e+000  result=40
04:13:54 Config A/D  Result=40
04:13:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:54 Get A/D filter: -9.255963e+061  result=40
04:13:54 Get A/D value=-858993460  result=40
04:13:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:13:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:13:54 Aux=
04:13:54 Message to Camera, serial 343808 queued
04:14:02 Received message from Master: op=Shutter serial=343818
04:14:02 Shutter LASER close
04:14:03 Received message from Master: op=PointingHead serial=343822
04:14:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:14:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:14:03 Point started: ret=0
04:14:03 point_skyscan result=0
04:14:04 Check angles
04:14:04 SkyScan query
04:14:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
04:14:05 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
04:14:05 Check angles
04:14:05 SkyScan query
04:14:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.785<-20119  Statuses=0008 0009
04:14:05 Msec=750  True Az=112.995  Ze=-121.785  Az status=0008  Ze status=0009
04:14:06 Check angles
04:14:06 SkyScan query
04:14:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
04:14:06 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
04:14:06 Check angles
04:14:06 SkyScan query
04:14:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.905<-17327  Statuses=0008 0009
04:14:07 Msec=2250  True Az=112.995  Ze=-79.905  Az status=0008  Ze status=0009
04:14:07 Check angles
04:14:07 SkyScan query
04:14:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.935<-15929  Statuses=0008 0009
04:14:08 Msec=3000  True Az=112.995  Ze=-58.935  Az status=0008  Ze status=0009
04:14:08 Check angles
04:14:08 SkyScan query
04:14:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.95<-14530  Statuses=0008 0009
04:14:08 Msec=3750  True Az=112.995  Ze=-37.95  Az status=0008  Ze status=0009
04:14:09 Check angles
04:14:09 SkyScan query
04:14:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.01<-13134  Statuses=0008 0009
04:14:09 Msec=4500  True Az=112.995  Ze=-17.01  Az status=0008  Ze status=0009
04:14:09 Check angles
04:14:09 SkyScan query
04:14:10 SkyScan query done: ret=0  az=112.995<-7533  ze=3.93<-11738  Statuses=0008 0009
04:14:10 Msec=5250  True Az=112.995  Ze=3.93  Az status=0008  Ze status=0009
04:14:10 Check angles
04:14:10 SkyScan query
04:14:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:14:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:14:11 Message to Master queued w/err=0: serial=343822 error=0
04:14:16 Received message from Master: op=Filter serial=343823
04:14:16 Color wheel filter change from 0 to 0
04:14:16 FLIGetFilterPos err=0  currentPosition=0
04:14:16 FLIGetStepsRemaining err=0  RemainingSteps=0
04:14:16 Filter is already there-color wheel unchanged
04:14:16 Received message from Master: op=Shutter serial=343824
04:14:16 Shutter LASER close
04:14:16 Received message from Camera: op=State serial=343826
04:14:16 GetSingleValue result=40  Value=cccccccc
04:14:16 SkyScan query
04:14:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:14:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:14:16 Parameters OK
04:14:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:14:16 Set A/D data flow result=40
04:14:16 Set A/D channel type result=40
04:14:16 Set A/D encoding result=40
04:14:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:14:16 Set channel filter=0.000000e+000  result=40
04:14:16 Config A/D  Result=40
04:14:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:14:16 Get A/D filter: -9.255963e+061  result=40
04:14:16 Get A/D value=-858993460  result=40
04:14:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:14:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:14:16 Parameters OK
04:14:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:14:16 Set A/D data flow result=40
04:14:16 Set A/D channel type result=40
04:14:16 Set A/D encoding result=40
04:14:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:14:16 Set channel filter=0.000000e+000  result=40
04:14:16 Config A/D  Result=40
04:14:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:14:16 Get A/D filter: -9.255963e+061  result=40
04:14:16 Get A/D value=-858993460  result=40
04:14:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:14:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:14:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:14:16 Aux=
04:14:16 Message to Camera, serial 343826 queued
04:14:52 Received message from Master: op=PointingHead serial=343838
04:14:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:14:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:14:53 Point started: ret=0
04:14:53 point_skyscan result=0
04:14:53 Check angles
04:14:53 SkyScan query
04:14:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:14:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:14:54 Message to Master queued w/err=0: serial=343838 error=0
04:14:59 Received message from Master: op=Filter serial=343839
04:14:59 Color wheel filter change from 0 to 0
04:14:59 FLIGetFilterPos err=0  currentPosition=0
04:14:59 FLIGetStepsRemaining err=0  RemainingSteps=0
04:14:59 Filter is already there-color wheel unchanged
04:14:59 Received message from Master: op=Shutter serial=343840
04:14:59 Shutter LASER close
04:14:59 Received message from Camera: op=State serial=343842
04:14:59 GetSingleValue result=40  Value=cccccccc
04:14:59 SkyScan query
04:15:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:15:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:15:00 Parameters OK
04:15:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:15:00 Set A/D data flow result=40
04:15:00 Set A/D channel type result=40
04:15:00 Set A/D encoding result=40
04:15:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:15:00 Set channel filter=0.000000e+000  result=40
04:15:00 Config A/D  Result=40
04:15:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:15:00 Get A/D filter: -9.255963e+061  result=40
04:15:00 Get A/D value=-858993460  result=40
04:15:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:15:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:15:00 Parameters OK
04:15:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:15:00 Set A/D data flow result=40
04:15:00 Set A/D channel type result=40
04:15:00 Set A/D encoding result=40
04:15:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:15:00 Set channel filter=0.000000e+000  result=40
04:15:00 Config A/D  Result=40
04:15:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:15:00 Get A/D filter: -9.255963e+061  result=40
04:15:00 Get A/D value=-858993460  result=40
04:15:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:15:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:15:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:15:00 Aux=
04:15:00 Message to Camera, serial 343842 queued
04:15:37 Received message from Master: op=PointingHead serial=343855
04:15:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:15:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:15:37 Point started: ret=0
04:15:37 point_skyscan result=0
04:15:38 Check angles
04:15:38 SkyScan query
04:15:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:15:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:15:38 Message to Master queued w/err=0: serial=343855 error=0
04:15:43 Received message from Master: op=Filter serial=343856
04:15:43 Color wheel filter change from 0 to 0
04:15:43 FLIGetFilterPos err=0  currentPosition=0
04:15:43 FLIGetStepsRemaining err=0  RemainingSteps=0
04:15:43 Filter is already there-color wheel unchanged
04:15:44 Received message from Master: op=Shutter serial=343857
04:15:44 Shutter LASER close
04:15:44 Received message from Camera: op=State serial=343859
04:15:44 GetSingleValue result=40  Value=cccccccc
04:15:44 SkyScan query
04:15:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:15:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:15:44 Parameters OK
04:15:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:15:44 Set A/D data flow result=40
04:15:44 Set A/D channel type result=40
04:15:44 Set A/D encoding result=40
04:15:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:15:44 Set channel filter=0.000000e+000  result=40
04:15:44 Config A/D  Result=40
04:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:15:44 Get A/D filter: -9.255963e+061  result=40
04:15:44 Get A/D value=-858993460  result=40
04:15:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:15:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:15:44 Parameters OK
04:15:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:15:44 Set A/D data flow result=40
04:15:44 Set A/D channel type result=40
04:15:44 Set A/D encoding result=40
04:15:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:15:44 Set channel filter=0.000000e+000  result=40
04:15:44 Config A/D  Result=40
04:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:15:44 Get A/D filter: -9.255963e+061  result=40
04:15:44 Get A/D value=-858993460  result=40
04:15:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:15:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:15:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:15:44 Aux=
04:15:44 Message to Camera, serial 343859 queued
04:16:21 Received message from Master: op=PointingHead serial=343872
04:16:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:16:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:16:21 Point started: ret=0
04:16:21 point_skyscan result=0
04:16:22 Check angles
04:16:22 SkyScan query
04:16:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:16:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:16:23 Message to Master queued w/err=0: serial=343872 error=0
04:16:28 Received message from Master: op=Filter serial=343873
04:16:28 Color wheel filter change from 0 to 0
04:16:28 FLIGetFilterPos err=0  currentPosition=0
04:16:28 FLIGetStepsRemaining err=0  RemainingSteps=0
04:16:28 Filter is already there-color wheel unchanged
04:16:28 Received message from Master: op=Shutter serial=343874
04:16:28 Shutter LASER close
04:16:28 Received message from Camera: op=State serial=343876
04:16:28 GetSingleValue result=40  Value=cccccccc
04:16:28 SkyScan query
04:16:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:16:28 Parameters OK
04:16:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:16:28 Set A/D data flow result=40
04:16:28 Set A/D channel type result=40
04:16:28 Set A/D encoding result=40
04:16:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:16:28 Set channel filter=0.000000e+000  result=40
04:16:28 Config A/D  Result=40
04:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:16:28 Get A/D filter: -9.255963e+061  result=40
04:16:28 Get A/D value=-858993460  result=40
04:16:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:16:28 Parameters OK
04:16:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:16:28 Set A/D data flow result=40
04:16:28 Set A/D channel type result=40
04:16:28 Set A/D encoding result=40
04:16:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:16:28 Set channel filter=0.000000e+000  result=40
04:16:28 Config A/D  Result=40
04:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:16:28 Get A/D filter: -9.255963e+061  result=40
04:16:28 Get A/D value=-858993460  result=40
04:16:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:16:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:16:28 Aux=
04:16:28 Message to Camera, serial 343876 queued
04:17:05 Received message from Master: op=PointingHead serial=343889
04:17:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:17:05 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:17:06 Point started: ret=0
04:17:06 point_skyscan result=0
04:17:06 Check angles
04:17:06 SkyScan query
04:17:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.775<-13585  Statuses=0008 0009
04:17:07 Msec=0  True Az=112.995  Ze=-23.775  Az status=0008  Ze status=0009
04:17:07 Check angles
04:17:07 SkyScan query
04:17:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.715<-14981  Statuses=0008 0009
04:17:08 Msec=750  True Az=112.995  Ze=-44.715  Az status=0008  Ze status=0009
04:17:08 Check angles
04:17:08 SkyScan query
04:17:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.105<-16407  Statuses=0008 0009
04:17:08 Msec=1500  True Az=112.995  Ze=-66.105  Az status=0008  Ze status=0009
04:17:09 Check angles
04:17:09 SkyScan query
04:17:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.045<-17803  Statuses=0008 0009
04:17:09 Msec=2250  True Az=112.995  Ze=-87.045  Az status=0008  Ze status=0009
04:17:09 Check angles
04:17:09 SkyScan query
04:17:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-108<-19200  Statuses=0008 0009
04:17:10 Msec=3000  True Az=112.995  Ze=-108  Az status=0008  Ze status=0009
04:17:10 Check angles
04:17:10 SkyScan query
04:17:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.39<-20626  Statuses=0008 0009
04:17:11 Msec=3750  True Az=112.995  Ze=-129.39  Az status=0008  Ze status=0009
04:17:11 Check angles
04:17:11 SkyScan query
04:17:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.36<-22024  Statuses=0008 0009
04:17:11 Msec=4500  True Az=112.995  Ze=-150.36  Az status=0008  Ze status=0009
04:17:12 Check angles
04:17:12 SkyScan query
04:17:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.15<-23410  Statuses=0008 0009
04:17:12 Msec=5250  True Az=112.995  Ze=-171.15  Az status=0008  Ze status=0009
04:17:12 Check angles
04:17:12 SkyScan query
04:17:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:17:13 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:17:13 Message to Master queued w/err=0: serial=343889 error=0
04:17:18 Received message from Master: op=Filter serial=343890
04:17:18 Color wheel filter change from 0 to 0
04:17:18 FLIGetFilterPos err=0  currentPosition=0
04:17:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:17:18 Filter is already there-color wheel unchanged
04:17:18 Received message from Master: op=Shutter serial=343891
04:17:18 Shutter LASER open
04:17:18 Received message from Camera: op=State serial=343893
04:17:18 GetSingleValue result=40  Value=cccccccc
04:17:18 SkyScan query
04:17:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:17:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:19 Parameters OK
04:17:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:19 Set A/D data flow result=40
04:17:19 Set A/D channel type result=40
04:17:19 Set A/D encoding result=40
04:17:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:19 Set channel filter=0.000000e+000  result=40
04:17:19 Config A/D  Result=40
04:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:19 Get A/D filter: -9.255963e+061  result=40
04:17:19 Get A/D value=-858993460  result=40
04:17:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:19 Parameters OK
04:17:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:19 Set A/D data flow result=40
04:17:19 Set A/D channel type result=40
04:17:19 Set A/D encoding result=40
04:17:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:19 Set channel filter=0.000000e+000  result=40
04:17:19 Config A/D  Result=40
04:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:19 Get A/D filter: -9.255963e+061  result=40
04:17:19 Get A/D value=-858993460  result=40
04:17:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:17:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:17:19 Aux=
04:17:19 Message to Camera, serial 343893 queued
04:17:27 Received message from Master: op=Shutter serial=343903
04:17:27 Shutter LASER close
04:17:28 Received message from Master: op=PointingHead serial=343907
04:17:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:17:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:17:28 Point started: ret=0
04:17:28 point_skyscan result=0
04:17:29 Check angles
04:17:29 SkyScan query
04:17:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
04:17:30 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
04:17:30 Check angles
04:17:30 SkyScan query
04:17:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.28<-20152  Statuses=0008 0009
04:17:30 Msec=750  True Az=112.995  Ze=-122.28  Az status=0008  Ze status=0009
04:17:31 Check angles
04:17:31 SkyScan query
04:17:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
04:17:31 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
04:17:31 Check angles
04:17:31 SkyScan query
04:17:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.355<-17357  Statuses=0008 0009
04:17:32 Msec=2250  True Az=112.995  Ze=-80.355  Az status=0008  Ze status=0009
04:17:32 Check angles
04:17:32 SkyScan query
04:17:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
04:17:33 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
04:17:33 Check angles
04:17:33 SkyScan query
04:17:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
04:17:33 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
04:17:34 Check angles
04:17:34 SkyScan query
04:17:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.055<-13137  Statuses=0008 0009
04:17:34 Msec=4500  True Az=112.995  Ze=-17.055  Az status=0008  Ze status=0009
04:17:34 Check angles
04:17:34 SkyScan query
04:17:35 SkyScan query done: ret=0  az=112.995<-7533  ze=4.275<-11715  Statuses=0008 0009
04:17:35 Msec=5250  True Az=112.995  Ze=4.275  Az status=0008  Ze status=0009
04:17:35 Check angles
04:17:35 SkyScan query
04:17:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:17:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:17:36 Message to Master queued w/err=0: serial=343907 error=0
04:17:41 Received message from Master: op=Filter serial=343908
04:17:41 Color wheel filter change from 0 to 0
04:17:41 FLIGetFilterPos err=0  currentPosition=0
04:17:41 FLIGetStepsRemaining err=0  RemainingSteps=0
04:17:41 Filter is already there-color wheel unchanged
04:17:41 Received message from Master: op=Shutter serial=343909
04:17:41 Shutter LASER close
04:17:41 Received message from Camera: op=State serial=343911
04:17:41 GetSingleValue result=40  Value=cccccccc
04:17:41 SkyScan query
04:17:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:17:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:42 Parameters OK
04:17:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:42 Set A/D data flow result=40
04:17:42 Set A/D channel type result=40
04:17:42 Set A/D encoding result=40
04:17:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:42 Set channel filter=0.000000e+000  result=40
04:17:42 Config A/D  Result=40
04:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:42 Get A/D filter: -9.255963e+061  result=40
04:17:42 Get A/D value=-858993460  result=40
04:17:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:42 Parameters OK
04:17:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:42 Set A/D data flow result=40
04:17:42 Set A/D channel type result=40
04:17:42 Set A/D encoding result=40
04:17:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:42 Set channel filter=0.000000e+000  result=40
04:17:42 Config A/D  Result=40
04:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:42 Get A/D filter: -9.255963e+061  result=40
04:17:42 Get A/D value=-858993460  result=40
04:17:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:17:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:17:42 Aux=
04:17:42 Message to Camera, serial 343911 queued
04:18:18 Received message from Master: op=PointingHead serial=343924
04:18:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:18:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:18:19 Point started: ret=0
04:18:19 point_skyscan result=0
04:18:19 Check angles
04:18:19 SkyScan query
04:18:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:18:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:18:20 Message to Master queued w/err=0: serial=343924 error=0
04:18:25 Received message from Master: op=Filter serial=343925
04:18:25 Color wheel filter change from 0 to 0
04:18:25 FLIGetFilterPos err=0  currentPosition=0
04:18:25 FLIGetStepsRemaining err=0  RemainingSteps=0
04:18:25 Filter is already there-color wheel unchanged
04:18:25 Received message from Master: op=Shutter serial=343926
04:18:25 Shutter LASER close
04:18:25 Received message from Camera: op=State serial=343928
04:18:25 GetSingleValue result=40  Value=cccccccc
04:18:25 SkyScan query
04:18:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:18:26 Parameters OK
04:18:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:18:26 Set A/D data flow result=40
04:18:26 Set A/D channel type result=40
04:18:26 Set A/D encoding result=40
04:18:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:18:26 Set channel filter=0.000000e+000  result=40
04:18:26 Config A/D  Result=40
04:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:18:26 Get A/D filter: -9.255963e+061  result=40
04:18:26 Get A/D value=-858993460  result=40
04:18:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:18:26 Parameters OK
04:18:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:18:26 Set A/D data flow result=40
04:18:26 Set A/D channel type result=40
04:18:26 Set A/D encoding result=40
[UTC 2019-3-19  04:18:26]
04:18:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:18:26 Set channel filter=0.000000e+000  result=40
04:18:26 Config A/D  Result=40
04:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:18:26 Get A/D filter: -9.255963e+061  result=40
04:18:26 Get A/D value=-858993460  result=40
04:18:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:18:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:18:26 Aux=
04:18:26 Message to Camera, serial 343928 queued
04:19:03 Received message from Master: op=PointingHead serial=343941
04:19:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:19:03 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:19:03 Point started: ret=0
04:19:03 point_skyscan result=0
04:19:04 Check angles
04:19:04 SkyScan query
04:19:04 SkyScan query done: ret=0  az=136.305<-9087  ze=-6.51<-12434  Statuses=0009 0008
04:19:04 Msec=0  True Az=136.305  Ze=-6.51  Az status=0009  Ze status=0008
04:19:05 Check angles
04:19:05 SkyScan query
04:19:05 SkyScan query done: ret=0  az=153.825<-10255  ze=-6.495<-12433  Statuses=0009 0008
04:19:05 Msec=750  True Az=153.825  Ze=-6.495  Az status=0009  Ze status=0008
04:19:05 Check angles
04:19:05 SkyScan query
04:19:06 SkyScan query done: ret=0  az=171.18<-11412  ze=-6.495<-12433  Statuses=0009 0008
04:19:06 Msec=1500  True Az=171.18  Ze=-6.495  Az status=0009  Ze status=0008
04:19:06 Check angles
04:19:06 SkyScan query
04:19:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:19:07 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
04:19:07 Message to Master queued w/err=0: serial=343941 error=0
04:19:12 Received message from Master: op=Filter serial=343942
04:19:12 Color wheel filter change from 0 to 0
04:19:12 FLIGetFilterPos err=0  currentPosition=0
04:19:12 FLIGetStepsRemaining err=0  RemainingSteps=0
04:19:12 Filter is already there-color wheel unchanged
04:19:12 Received message from Master: op=Shutter serial=343943
04:19:12 Shutter LASER close
04:19:12 Received message from Camera: op=State serial=343945
04:19:12 GetSingleValue result=40  Value=cccccccc
04:19:12 SkyScan query
04:19:12 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:19:12 Parameters OK
04:19:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:19:12 Set A/D data flow result=40
04:19:12 Set A/D channel type result=40
04:19:12 Set A/D encoding result=40
04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:19:12 Set channel filter=0.000000e+000  result=40
04:19:12 Config A/D  Result=40
04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:19:12 Get A/D filter: -9.255963e+061  result=40
04:19:12 Get A/D value=-858993460  result=40
04:19:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:19:12 Parameters OK
04:19:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:19:12 Set A/D data flow result=40
04:19:12 Set A/D channel type result=40
04:19:12 Set A/D encoding result=40
04:19:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:19:12 Set channel filter=0.000000e+000  result=40
04:19:12 Config A/D  Result=40
04:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:19:12 Get A/D filter: -9.255963e+061  result=40
04:19:12 Get A/D value=-858993460  result=40
04:19:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:19:12 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:19:12 Aux=
04:19:12 Message to Camera, serial 343945 queued
04:19:49 Received message from Master: op=PointingHead serial=343958
04:19:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:19:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:19:50 Point started: ret=0
04:19:50 point_skyscan result=0
04:19:50 Check angles
04:19:50 SkyScan query
04:19:51 SkyScan query done: ret=0  az=152.76<-10184  ze=6.51<-11566  Statuses=0009 0008
04:19:51 Msec=0  True Az=152.76  Ze=6.51  Az status=0009  Ze status=0008
04:19:51 Check angles
04:19:51 SkyScan query
04:19:52 SkyScan query done: ret=0  az=135.315<-9021  ze=6.495<-11567  Statuses=0009 0008
04:19:52 Msec=750  True Az=135.315  Ze=6.495  Az status=0009  Ze status=0008
04:19:52 Check angles
04:19:52 SkyScan query
04:19:52 SkyScan query done: ret=0  az=117.96<-7864  ze=6.495<-11567  Statuses=0009 0008
04:19:52 Msec=1500  True Az=117.96  Ze=6.495  Az status=0009  Ze status=0008
04:19:53 Check angles
04:19:53 SkyScan query
04:19:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:19:53 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:19:53 Message to Master queued w/err=0: serial=343958 error=0
04:19:58 Received message from Master: op=Filter serial=343959
04:19:58 Color wheel filter change from 0 to 0
04:19:58 FLIGetFilterPos err=0  currentPosition=0
04:19:58 FLIGetStepsRemaining err=0  RemainingSteps=0
04:19:58 Filter is already there-color wheel unchanged
04:19:58 Received message from Master: op=Shutter serial=343960
04:19:58 Shutter LASER close
04:19:58 Received message from Camera: op=State serial=343962
04:19:58 GetSingleValue result=40  Value=cccccccc
04:19:58 SkyScan query
04:19:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:19:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:19:59 Parameters OK
04:19:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:19:59 Set A/D data flow result=40
04:19:59 Set A/D channel type result=40
04:19:59 Set A/D encoding result=40
04:19:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:19:59 Set channel filter=0.000000e+000  result=40
04:19:59 Config A/D  Result=40
04:19:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:19:59 Get A/D filter: -9.255963e+061  result=40
04:19:59 Get A/D value=-858993460  result=40
04:19:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:19:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:19:59 Parameters OK
04:19:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:19:59 Set A/D data flow result=40
04:19:59 Set A/D channel type result=40
04:19:59 Set A/D encoding result=40
04:19:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:19:59 Set channel filter=0.000000e+000  result=40
04:19:59 Config A/D  Result=40
04:19:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:19:59 Get A/D filter: -9.255963e+061  result=40
04:19:59 Get A/D value=-858993460  result=40
04:19:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:19:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:19:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:19:59 Aux=
04:19:59 Message to Camera, serial 343962 queued
04:20:36 Received message from Master: op=PointingHead serial=343975
04:20:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:20:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:20:36 Point started: ret=0
04:20:36 point_skyscan result=0
04:20:37 Check angles
04:20:37 SkyScan query
04:20:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
04:20:37 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
04:20:38 Check angles
04:20:38 SkyScan query
04:20:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
04:20:38 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
04:20:38 Check angles
04:20:38 SkyScan query
04:20:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
04:20:39 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
04:20:39 Check angles
04:20:39 SkyScan query
04:20:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.325<-17755  Statuses=0008 0009
04:20:40 Msec=2250  True Az=112.995  Ze=-86.325  Az status=0008  Ze status=0009
04:20:40 Check angles
04:20:40 SkyScan query
04:20:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.265<-19151  Statuses=0008 0009
04:20:40 Msec=3000  True Az=112.995  Ze=-107.265  Az status=0008  Ze status=0009
04:20:41 Check angles
04:20:41 SkyScan query
04:20:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.22<-20548  Statuses=0008 0009
04:20:41 Msec=3750  True Az=112.995  Ze=-128.22  Az status=0008  Ze status=0009
04:20:41 Check angles
04:20:41 SkyScan query
04:20:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.19<-21946  Statuses=0008 0009
04:20:42 Msec=4500  True Az=112.995  Ze=-149.19  Az status=0008  Ze status=0009
04:20:42 Check angles
04:20:42 SkyScan query
04:20:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.13<-23342  Statuses=0008 0009
04:20:43 Msec=5250  True Az=112.995  Ze=-170.13  Az status=0008  Ze status=0009
04:20:43 Check angles
04:20:43 SkyScan query
04:20:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:20:43 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:20:43 Message to Master queued w/err=0: serial=343975 error=0
04:20:48 Received message from Master: op=Filter serial=343976
04:20:48 Color wheel filter change from 0 to 0
04:20:48 FLIGetFilterPos err=0  currentPosition=0
04:20:48 FLIGetStepsRemaining err=0  RemainingSteps=0
04:20:48 Filter is already there-color wheel unchanged
04:20:49 Received message from Master: op=Shutter serial=343977
04:20:49 Shutter LASER open
04:20:49 Received message from Camera: op=State serial=343979
04:20:49 GetSingleValue result=40  Value=cccccccc
04:20:49 SkyScan query
04:20:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:20:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:20:49 Parameters OK
04:20:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:20:49 Set A/D data flow result=40
04:20:49 Set A/D channel type result=40
04:20:49 Set A/D encoding result=40
04:20:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:20:49 Set channel filter=0.000000e+000  result=40
04:20:49 Config A/D  Result=40
04:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:20:49 Get A/D filter: -9.255963e+061  result=40
04:20:49 Get A/D value=-858993460  result=40
04:20:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:20:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:20:49 Parameters OK
04:20:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:20:49 Set A/D data flow result=40
04:20:49 Set A/D channel type result=40
04:20:49 Set A/D encoding result=40
04:20:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:20:49 Set channel filter=0.000000e+000  result=40
04:20:49 Config A/D  Result=40
04:20:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:20:49 Get A/D filter: -9.255963e+061  result=40
04:20:49 Get A/D value=-858993460  result=40
04:20:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:20:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:20:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:20:49 Aux=
04:20:49 Message to Camera, serial 343979 queued
04:20:58 Received message from Master: op=Shutter serial=343989
04:20:58 Shutter LASER close
04:20:58 Received message from Master: op=PointingHead serial=343993
04:20:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:20:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:20:59 Point started: ret=0
04:20:59 point_skyscan result=0
04:20:59 Check angles
04:20:59 SkyScan query
04:21:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.8<-21520  Statuses=0008 0009
04:21:00 Msec=0  True Az=112.995  Ze=-142.8  Az status=0008  Ze status=0009
04:21:00 Check angles
04:21:00 SkyScan query
04:21:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.815<-20121  Statuses=0008 0009
04:21:01 Msec=750  True Az=112.995  Ze=-121.815  Az status=0008  Ze status=0009
04:21:01 Check angles
04:21:01 SkyScan query
04:21:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.89<-18726  Statuses=0008 0009
04:21:01 Msec=1500  True Az=112.995  Ze=-100.89  Az status=0008  Ze status=0009
04:21:02 Check angles
04:21:02 SkyScan query
04:21:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.95<-17330  Statuses=0008 0009
04:21:02 Msec=2250  True Az=112.995  Ze=-79.95  Az status=0008  Ze status=0009
04:21:02 Check angles
04:21:02 SkyScan query
04:21:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.995<-15933  Statuses=0008 0009
04:21:03 Msec=3000  True Az=112.995  Ze=-58.995  Az status=0008  Ze status=0009
04:21:03 Check angles
04:21:03 SkyScan query
04:21:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
04:21:04 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
04:21:04 Check angles
04:21:04 SkyScan query
04:21:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.07<-13138  Statuses=0008 0009
04:21:04 Msec=4500  True Az=112.995  Ze=-17.07  Az status=0008  Ze status=0009
04:21:05 Check angles
04:21:05 SkyScan query
04:21:05 SkyScan query done: ret=0  az=112.995<-7533  ze=3.9<-11740  Statuses=0008 0009
04:21:05 Msec=5250  True Az=112.995  Ze=3.9  Az status=0008  Ze status=0009
04:21:05 Check angles
04:21:05 SkyScan query
04:21:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:21:06 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:21:06 Message to Master queued w/err=0: serial=343993 error=0
04:21:11 Received message from Master: op=Filter serial=343994
04:21:11 Color wheel filter change from 0 to 0
04:21:11 FLIGetFilterPos err=0  currentPosition=0
04:21:11 FLIGetStepsRemaining err=0  RemainingSteps=0
04:21:11 Filter is already there-color wheel unchanged
04:21:11 Received message from Master: op=Shutter serial=343995
04:21:11 Shutter LASER close
04:21:11 Received message from Camera: op=State serial=343997
04:21:11 GetSingleValue result=40  Value=cccccccc
04:21:11 SkyScan query
04:21:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:21:12 Parameters OK
04:21:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:21:12 Set A/D data flow result=40
04:21:12 Set A/D channel type result=40
04:21:12 Set A/D encoding result=40
04:21:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:21:12 Set channel filter=0.000000e+000  result=40
04:21:12 Config A/D  Result=40
04:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:21:12 Get A/D filter: -9.255963e+061  result=40
04:21:12 Get A/D value=-858993460  result=40
04:21:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:21:12 Parameters OK
04:21:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:21:12 Set A/D data flow result=40
04:21:12 Set A/D channel type result=40
04:21:12 Set A/D encoding result=40
04:21:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:21:12 Set channel filter=0.000000e+000  result=40
04:21:12 Config A/D  Result=40
04:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:21:12 Get A/D filter: -9.255963e+061  result=40
04:21:12 Get A/D value=-858993460  result=40
04:21:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:21:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:21:12 Aux=
04:21:12 Message to Camera, serial 343997 queued
04:21:49 Received message from Master: op=PointingHead serial=344010
04:21:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:21:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:21:49 Point started: ret=0
04:21:49 point_skyscan result=0
04:21:50 Check angles
04:21:50 SkyScan query
04:21:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:21:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:21:51 Message to Master queued w/err=0: serial=344010 error=0
04:21:56 Received message from Master: op=Filter serial=344011
04:21:56 Color wheel filter change from 0 to 0
04:21:56 FLIGetFilterPos err=0  currentPosition=0
04:21:56 FLIGetStepsRemaining err=0  RemainingSteps=0
04:21:56 Filter is already there-color wheel unchanged
04:21:56 Received message from Master: op=Shutter serial=344012
04:21:56 Shutter LASER close
04:21:56 Received message from Camera: op=State serial=344014
04:21:56 GetSingleValue result=40  Value=cccccccc
04:21:56 SkyScan query
04:21:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:21:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:21:56 Parameters OK
04:21:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:21:56 Set A/D data flow result=40
04:21:56 Set A/D channel type result=40
04:21:56 Set A/D encoding result=40
04:21:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:21:56 Set channel filter=0.000000e+000  result=40
04:21:56 Config A/D  Result=40
04:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:21:56 Get A/D filter: -9.255963e+061  result=40
04:21:56 Get A/D value=-858993460  result=40
04:21:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:21:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:21:56 Parameters OK
04:21:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:21:56 Set A/D data flow result=40
04:21:56 Set A/D channel type result=40
04:21:56 Set A/D encoding result=40
04:21:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:21:56 Set channel filter=0.000000e+000  result=40
04:21:56 Config A/D  Result=40
04:21:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:21:56 Get A/D filter: -9.255963e+061  result=40
04:21:56 Get A/D value=-858993460  result=40
04:21:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:21:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:21:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:21:56 Aux=
04:21:56 Message to Camera, serial 344014 queued
04:22:33 Received message from Master: op=PointingHead serial=344027
04:22:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:22:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:22:34 Point started: ret=0
04:22:34 point_skyscan result=0
04:22:34 Check angles
04:22:34 SkyScan query
04:22:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:22:35 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:22:35 Message to Master queued w/err=0: serial=344027 error=0
04:22:40 Received message from Master: op=Filter serial=344028
04:22:40 Color wheel filter change from 0 to 0
04:22:40 FLIGetFilterPos err=0  currentPosition=0
04:22:40 FLIGetStepsRemaining err=0  RemainingSteps=0
04:22:40 Filter is already there-color wheel unchanged
04:22:40 Received message from Master: op=Shutter serial=344029
04:22:40 Shutter LASER close
04:22:40 Received message from Camera: op=State serial=344031
04:22:40 GetSingleValue result=40  Value=cccccccc
04:22:40 SkyScan query
04:22:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:22:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:22:41 Parameters OK
04:22:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:22:41 Set A/D data flow result=40
04:22:41 Set A/D channel type result=40
04:22:41 Set A/D encoding result=40
04:22:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:22:41 Set channel filter=0.000000e+000  result=40
04:22:41 Config A/D  Result=40
04:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:22:41 Get A/D filter: -9.255963e+061  result=40
04:22:41 Get A/D value=-858993460  result=40
04:22:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:22:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:22:41 Parameters OK
04:22:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:22:41 Set A/D data flow result=40
04:22:41 Set A/D channel type result=40
04:22:41 Set A/D encoding result=40
04:22:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:22:41 Set channel filter=0.000000e+000  result=40
04:22:41 Config A/D  Result=40
04:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:22:41 Get A/D filter: -9.255963e+061  result=40
04:22:41 Get A/D value=-858993460  result=40
04:22:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:22:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:22:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:22:41 Aux=
04:22:41 Message to Camera, serial 344031 queued
04:23:17 Received message from Master: op=PointingHead serial=344043
04:23:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:23:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:23:17 Point started: ret=0
04:23:17 point_skyscan result=0
04:23:18 Check angles
04:23:18 SkyScan query
04:23:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:23:18 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:23:18 Message to Master queued w/err=0: serial=344043 error=0
04:23:23 Received message from Master: op=Filter serial=344044
04:23:23 Color wheel filter change from 0 to 0
04:23:23 FLIGetFilterPos err=0  currentPosition=0
04:23:23 FLIGetStepsRemaining err=0  RemainingSteps=0
04:23:23 Filter is already there-color wheel unchanged
04:23:23 Received message from Master: op=Shutter serial=344045
04:23:23 Shutter LASER close
04:23:23 Received message from Camera: op=State serial=344047
04:23:23 GetSingleValue result=40  Value=cccccccc
04:23:23 SkyScan query
04:23:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:23:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:23:24 Parameters OK
04:23:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:23:24 Set A/D data flow result=40
04:23:24 Set A/D channel type result=40
04:23:24 Set A/D encoding result=40
04:23:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:23:24 Set channel filter=0.000000e+000  result=40
04:23:24 Config A/D  Result=40
04:23:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:23:24 Get A/D filter: -9.255963e+061  result=40
04:23:24 Get A/D value=-858993460  result=40
04:23:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:23:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:23:24 Parameters OK
04:23:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:23:24 Set A/D data flow result=40
04:23:24 Set A/D channel type result=40
04:23:24 Set A/D encoding result=40
04:23:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:23:24 Set channel filter=0.000000e+000  result=40
04:23:24 Config A/D  Result=40
04:23:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:23:24 Get A/D filter: -9.255963e+061  result=40
04:23:24 Get A/D value=-858993460  result=40
04:23:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:23:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:23:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:23:24 Aux=
04:23:24 Message to Camera, serial 344047 queued
[UTC 2019-3-19  04:23:48]
04:24:01 Received message from Master: op=PointingHead serial=344060
04:24:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:24:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:24:01 Point started: ret=0
04:24:01 point_skyscan result=0
04:24:02 Check angles
04:24:02 SkyScan query
04:24:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
04:24:02 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
04:24:03 Check angles
04:24:03 SkyScan query
04:24:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
04:24:03 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
04:24:03 Check angles
04:24:03 SkyScan query
04:24:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
04:24:04 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
04:24:04 Check angles
04:24:04 SkyScan query
04:24:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.325<-17755  Statuses=0008 0009
04:24:05 Msec=2250  True Az=112.995  Ze=-86.325  Az status=0008  Ze status=0009
04:24:05 Check angles
04:24:05 SkyScan query
04:24:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.265<-19151  Statuses=0008 0009
04:24:05 Msec=3000  True Az=112.995  Ze=-107.265  Az status=0008  Ze status=0009
04:24:06 Check angles
04:24:06 SkyScan query
04:24:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.22<-20548  Statuses=0008 0009
04:24:06 Msec=3750  True Az=112.995  Ze=-128.22  Az status=0008  Ze status=0009
04:24:06 Check angles
04:24:06 SkyScan query
04:24:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.19<-21946  Statuses=0008 0009
04:24:07 Msec=4500  True Az=112.995  Ze=-149.19  Az status=0008  Ze status=0009
04:24:07 Check angles
04:24:07 SkyScan query
04:24:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.13<-23342  Statuses=0008 0009
04:24:08 Msec=5250  True Az=112.995  Ze=-170.13  Az status=0008  Ze status=0009
04:24:08 Check angles
04:24:08 SkyScan query
04:24:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:24:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:24:08 Message to Master queued w/err=0: serial=344060 error=0
04:24:13 Received message from Master: op=Filter serial=344061
04:24:13 Color wheel filter change from 0 to 0
04:24:13 FLIGetFilterPos err=0  currentPosition=0
04:24:13 FLIGetStepsRemaining err=0  RemainingSteps=0
04:24:13 Filter is already there-color wheel unchanged
04:24:14 Received message from Master: op=Shutter serial=344062
04:24:14 Shutter LASER open
04:24:14 Received message from Camera: op=State serial=344064
04:24:14 GetSingleValue result=40  Value=cccccccc
04:24:14 SkyScan query
04:24:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:24:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:14 Parameters OK
04:24:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:14 Set A/D data flow result=40
04:24:14 Set A/D channel type result=40
04:24:14 Set A/D encoding result=40
04:24:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:14 Set channel filter=0.000000e+000  result=40
04:24:14 Config A/D  Result=40
04:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:14 Get A/D filter: -9.255963e+061  result=40
04:24:14 Get A/D value=-858993460  result=40
04:24:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:14 Parameters OK
04:24:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:14 Set A/D data flow result=40
04:24:14 Set A/D channel type result=40
04:24:14 Set A/D encoding result=40
04:24:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:14 Set channel filter=0.000000e+000  result=40
04:24:14 Config A/D  Result=40
04:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:14 Get A/D filter: -9.255963e+061  result=40
04:24:14 Get A/D value=-858993460  result=40
04:24:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:24:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:24:14 Aux=
04:24:14 Message to Camera, serial 344064 queued
04:24:23 Received message from Master: op=Shutter serial=344074
04:24:23 Shutter LASER close
04:24:24 Received message from Master: op=PointingHead serial=344078
04:24:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:24:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:24:24 Point started: ret=0
04:24:24 point_skyscan result=0
04:24:25 Check angles
04:24:25 SkyScan query
04:24:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.755<-21517  Statuses=0008 0009
04:24:25 Msec=0  True Az=112.995  Ze=-142.755  Az status=0008  Ze status=0009
04:24:25 Check angles
04:24:25 SkyScan query
04:24:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.8<-20120  Statuses=0008 0009
04:24:26 Msec=750  True Az=112.995  Ze=-121.8  Az status=0008  Ze status=0009
04:24:26 Check angles
04:24:26 SkyScan query
04:24:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
04:24:27 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
04:24:27 Check angles
04:24:27 SkyScan query
04:24:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.92<-17328  Statuses=0008 0009
04:24:27 Msec=2250  True Az=112.995  Ze=-79.92  Az status=0008  Ze status=0009
04:24:28 Check angles
04:24:28 SkyScan query
04:24:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.485<-15899  Statuses=0008 0009
04:24:28 Msec=3000  True Az=112.995  Ze=-58.485  Az status=0008  Ze status=0009
04:24:28 Check angles
04:24:28 SkyScan query
04:24:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
04:24:29 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
04:24:29 Check angles
04:24:29 SkyScan query
04:24:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.59<-13106  Statuses=0008 0009
04:24:30 Msec=4500  True Az=112.995  Ze=-16.59  Az status=0008  Ze status=0009
04:24:30 Check angles
04:24:30 SkyScan query
04:24:30 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
04:24:30 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
04:24:31 Check angles
04:24:31 SkyScan query
04:24:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:24:31 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:24:31 Message to Master queued w/err=0: serial=344078 error=0
04:24:36 Received message from Master: op=Filter serial=344079
04:24:36 Color wheel filter change from 0 to 0
04:24:36 FLIGetFilterPos err=0  currentPosition=0
04:24:36 FLIGetStepsRemaining err=0  RemainingSteps=0
04:24:36 Filter is already there-color wheel unchanged
04:24:36 Received message from Master: op=Shutter serial=344080
04:24:36 Shutter LASER close
04:24:37 Received message from Camera: op=State serial=344082
04:24:37 GetSingleValue result=40  Value=cccccccc
04:24:37 SkyScan query
04:24:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:24:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:37 Parameters OK
04:24:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:37 Set A/D data flow result=40
04:24:37 Set A/D channel type result=40
04:24:37 Set A/D encoding result=40
04:24:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:37 Set channel filter=0.000000e+000  result=40
04:24:37 Config A/D  Result=40
04:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:37 Get A/D filter: -9.255963e+061  result=40
04:24:37 Get A/D value=-858993460  result=40
04:24:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:37 Parameters OK
04:24:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:37 Set A/D data flow result=40
04:24:37 Set A/D channel type result=40
04:24:37 Set A/D encoding result=40
04:24:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:37 Set channel filter=0.000000e+000  result=40
04:24:37 Config A/D  Result=40
04:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:37 Get A/D filter: -9.255963e+061  result=40
04:24:37 Get A/D value=-858993460  result=40
04:24:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:24:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:24:37 Aux=
04:24:37 Message to Camera, serial 344082 queued
04:25:14 Received message from Master: op=PointingHead serial=344095
04:25:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:25:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:25:14 Point started: ret=0
04:25:14 point_skyscan result=0
04:25:15 Check angles
04:25:15 SkyScan query
04:25:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:25:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:25:16 Message to Master queued w/err=0: serial=344095 error=0
04:25:21 Received message from Master: op=Filter serial=344096
04:25:21 Color wheel filter change from 0 to 0
04:25:21 FLIGetFilterPos err=0  currentPosition=0
04:25:21 FLIGetStepsRemaining err=0  RemainingSteps=0
04:25:21 Filter is already there-color wheel unchanged
04:25:21 Received message from Master: op=Shutter serial=344097
04:25:21 Shutter LASER close
04:25:21 Received message from Camera: op=State serial=344099
04:25:21 GetSingleValue result=40  Value=cccccccc
04:25:21 SkyScan query
04:25:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:25:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:25:21 Parameters OK
04:25:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:25:21 Set A/D data flow result=40
04:25:21 Set A/D channel type result=40
04:25:21 Set A/D encoding result=40
04:25:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:25:21 Set channel filter=0.000000e+000  result=40
04:25:21 Config A/D  Result=40
04:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:25:21 Get A/D filter: -9.255963e+061  result=40
04:25:21 Get A/D value=-858993460  result=40
04:25:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:25:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:25:21 Parameters OK
04:25:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:25:21 Set A/D data flow result=40
04:25:21 Set A/D channel type result=40
04:25:21 Set A/D encoding result=40
04:25:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:25:21 Set channel filter=0.000000e+000  result=40
04:25:21 Config A/D  Result=40
04:25:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:25:21 Get A/D filter: -9.255963e+061  result=40
04:25:21 Get A/D value=-858993460  result=40
04:25:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:25:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:25:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:25:21 Aux=
04:25:21 Message to Camera, serial 344099 queued
04:25:58 Received message from Master: op=PointingHead serial=344112
04:25:58 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:25:58 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:25:59 Point started: ret=0
04:25:59 point_skyscan result=0
04:25:59 Check angles
04:25:59 SkyScan query
04:26:00 SkyScan query done: ret=0  az=135.87<-9058  ze=-6.51<-12434  Statuses=0009 0008
04:26:00 Msec=0  True Az=135.87  Ze=-6.51  Az status=0009  Ze status=0008
04:26:00 Check angles
04:26:00 SkyScan query
04:26:01 SkyScan query done: ret=0  az=153.39<-10226  ze=-6.495<-12433  Statuses=0009 0008
04:26:01 Msec=750  True Az=153.39  Ze=-6.495  Az status=0009  Ze status=0008
04:26:01 Check angles
04:26:01 SkyScan query
04:26:01 SkyScan query done: ret=0  az=170.76<-11384  ze=-6.495<-12433  Statuses=0009 0008
04:26:01 Msec=1500  True Az=170.76  Ze=-6.495  Az status=0009  Ze status=0008
04:26:02 Check angles
04:26:02 SkyScan query
04:26:02 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:26:02 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
04:26:02 Message to Master queued w/err=0: serial=344112 error=0
04:26:07 Received message from Master: op=Filter serial=344113
04:26:07 Color wheel filter change from 0 to 0
04:26:07 FLIGetFilterPos err=0  currentPosition=0
04:26:07 FLIGetStepsRemaining err=0  RemainingSteps=0
04:26:07 Filter is already there-color wheel unchanged
04:26:07 Received message from Master: op=Shutter serial=344114
04:26:07 Shutter LASER close
04:26:07 Received message from Camera: op=State serial=344116
04:26:07 GetSingleValue result=40  Value=cccccccc
04:26:07 SkyScan query
04:26:08 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:26:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:26:08 Parameters OK
04:26:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:26:08 Set A/D data flow result=40
04:26:08 Set A/D channel type result=40
04:26:08 Set A/D encoding result=40
04:26:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:26:08 Set channel filter=0.000000e+000  result=40
04:26:08 Config A/D  Result=40
04:26:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:26:08 Get A/D filter: -9.255963e+061  result=40
04:26:08 Get A/D value=-858993460  result=40
04:26:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:26:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:26:08 Parameters OK
04:26:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:26:08 Set A/D data flow result=40
04:26:08 Set A/D channel type result=40
04:26:08 Set A/D encoding result=40
04:26:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:26:08 Set channel filter=0.000000e+000  result=40
04:26:08 Config A/D  Result=40
04:26:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:26:08 Get A/D filter: -9.255963e+061  result=40
04:26:08 Get A/D value=-858993460  result=40
04:26:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:26:08 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:26:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:26:08 Aux=
04:26:08 Message to Camera, serial 344116 queued
04:26:45 Received message from Master: op=PointingHead serial=344129
04:26:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:26:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:26:45 Point started: ret=0
04:26:45 point_skyscan result=0
04:26:46 Check angles
04:26:46 SkyScan query
04:26:46 SkyScan query done: ret=0  az=152.97<-10198  ze=6.51<-11566  Statuses=0009 0008
04:26:46 Msec=0  True Az=152.97  Ze=6.51  Az status=0009  Ze status=0008
04:26:47 Check angles
04:26:47 SkyScan query
04:26:47 SkyScan query done: ret=0  az=135.54<-9036  ze=6.495<-11567  Statuses=0009 0008
04:26:47 Msec=750  True Az=135.54  Ze=6.495  Az status=0009  Ze status=0008
04:26:47 Check angles
04:26:47 SkyScan query
04:26:48 SkyScan query done: ret=0  az=118.065<-7871  ze=6.495<-11567  Statuses=0009 0008
04:26:48 Msec=1500  True Az=118.065  Ze=6.495  Az status=0009  Ze status=0008
04:26:48 Check angles
04:26:48 SkyScan query
04:26:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:26:49 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:26:49 Message to Master queued w/err=0: serial=344129 error=0
04:26:54 Received message from Master: op=Filter serial=344130
04:26:54 Color wheel filter change from 0 to 0
04:26:54 FLIGetFilterPos err=0  currentPosition=0
04:26:54 FLIGetStepsRemaining err=0  RemainingSteps=0
04:26:54 Filter is already there-color wheel unchanged
04:26:54 Received message from Master: op=Shutter serial=344131
04:26:54 Shutter LASER close
04:26:54 Received message from Camera: op=State serial=344133
04:26:54 GetSingleValue result=40  Value=cccccccc
04:26:54 SkyScan query
04:26:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:26:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:26:55 Parameters OK
04:26:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:26:55 Set A/D data flow result=40
04:26:55 Set A/D channel type result=40
04:26:55 Set A/D encoding result=40
04:26:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:26:55 Set channel filter=0.000000e+000  result=40
04:26:55 Config A/D  Result=40
04:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:26:55 Get A/D filter: -9.255963e+061  result=40
04:26:55 Get A/D value=-858993460  result=40
04:26:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:26:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:26:55 Parameters OK
04:26:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:26:55 Set A/D data flow result=40
04:26:55 Set A/D channel type result=40
04:26:55 Set A/D encoding result=40
04:26:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:26:55 Set channel filter=0.000000e+000  result=40
04:26:55 Config A/D  Result=40
04:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:26:55 Get A/D filter: -9.255963e+061  result=40
04:26:55 Get A/D value=-858993460  result=40
04:26:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:26:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:26:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:26:55 Aux=
04:26:55 Message to Camera, serial 344133 queued
04:27:31 Received message from Master: op=PointingHead serial=344146
04:27:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:27:31 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:27:32 Point started: ret=0
04:27:32 point_skyscan result=0
04:27:32 Check angles
04:27:32 SkyScan query
04:27:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.52<-13568  Statuses=0008 0009
04:27:33 Msec=0  True Az=112.995  Ze=-23.52  Az status=0008  Ze status=0009
04:27:33 Check angles
04:27:33 SkyScan query
04:27:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
04:27:34 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
04:27:34 Check angles
04:27:34 SkyScan query
04:27:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.445<-16363  Statuses=0008 0009
04:27:35 Msec=1500  True Az=112.995  Ze=-65.445  Az status=0008  Ze status=0009
04:27:35 Check angles
04:27:35 SkyScan query
04:27:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.46<-17764  Statuses=0008 0009
04:27:35 Msec=2250  True Az=112.995  Ze=-86.46  Az status=0008  Ze status=0009
04:27:35 Check angles
04:27:35 SkyScan query
04:27:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.775<-19185  Statuses=0008 0009
04:27:36 Msec=3000  True Az=112.995  Ze=-107.775  Az status=0008  Ze status=0009
04:27:36 Check angles
04:27:36 SkyScan query
04:27:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.165<-20611  Statuses=0008 0009
04:27:37 Msec=3750  True Az=112.995  Ze=-129.165  Az status=0008  Ze status=0009
04:27:37 Check angles
04:27:37 SkyScan query
04:27:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.555<-22037  Statuses=0008 0009
04:27:38 Msec=4500  True Az=112.995  Ze=-150.555  Az status=0008  Ze status=0009
04:27:38 Check angles
04:27:38 SkyScan query
04:27:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.285<-23419  Statuses=0008 0009
04:27:38 Msec=5250  True Az=112.995  Ze=-171.285  Az status=0008  Ze status=0009
04:27:39 Check angles
04:27:39 SkyScan query
04:27:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:27:39 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:27:39 Message to Master queued w/err=0: serial=344146 error=0
04:27:44 Received message from Master: op=Filter serial=344147
04:27:44 Color wheel filter change from 0 to 0
04:27:44 FLIGetFilterPos err=0  currentPosition=0
04:27:44 FLIGetStepsRemaining err=0  RemainingSteps=0
04:27:44 Filter is already there-color wheel unchanged
04:27:44 Received message from Master: op=Shutter serial=344148
04:27:44 Shutter LASER open
04:27:44 Received message from Camera: op=State serial=344150
04:27:44 GetSingleValue result=40  Value=cccccccc
04:27:44 SkyScan query
04:27:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:27:45 Parameters OK
04:27:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:27:45 Set A/D data flow result=40
04:27:45 Set A/D channel type result=40
04:27:45 Set A/D encoding result=40
04:27:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:27:45 Set channel filter=0.000000e+000  result=40
04:27:45 Config A/D  Result=40
04:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:27:45 Get A/D filter: -9.255963e+061  result=40
04:27:45 Get A/D value=-858993460  result=40
04:27:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:27:45 Parameters OK
04:27:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:27:45 Set A/D data flow result=40
04:27:45 Set A/D channel type result=40
04:27:45 Set A/D encoding result=40
04:27:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:27:45 Set channel filter=0.000000e+000  result=40
04:27:45 Config A/D  Result=40
04:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:27:45 Get A/D filter: -9.255963e+061  result=40
04:27:45 Get A/D value=-858993460  result=40
04:27:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:27:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:27:45 Aux=
04:27:45 Message to Camera, serial 344150 queued
04:27:53 Received message from Master: op=Shutter serial=344160
04:27:53 Shutter LASER close
04:27:54 Received message from Master: op=PointingHead serial=344164
04:27:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:27:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:27:54 Point started: ret=0
04:27:54 point_skyscan result=0
04:27:55 Check angles
04:27:55 SkyScan query
04:27:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
04:27:56 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
04:27:56 Check angles
04:27:56 SkyScan query
04:27:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.175<-20145  Statuses=0008 0009
04:27:56 Msec=750  True Az=112.995  Ze=-122.175  Az status=0008  Ze status=0009
04:27:56 Check angles
04:27:56 SkyScan query
04:27:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
04:27:57 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
04:27:57 Check angles
04:27:57 SkyScan query
04:27:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.905<-17327  Statuses=0008 0009
04:27:58 Msec=2250  True Az=112.995  Ze=-79.905  Az status=0008  Ze status=0009
04:27:58 Check angles
04:27:58 SkyScan query
04:27:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.95<-15930  Statuses=0008 0009
04:27:59 Msec=3000  True Az=112.995  Ze=-58.95  Az status=0008  Ze status=0009
04:27:59 Check angles
04:27:59 SkyScan query
04:27:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
04:27:59 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
04:28:00 Check angles
04:28:00 SkyScan query
04:28:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.14<-13076  Statuses=0008 0009
04:28:00 Msec=4500  True Az=112.995  Ze=-16.14  Az status=0008  Ze status=0009
04:28:00 Check angles
04:28:00 SkyScan query
04:28:01 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
04:28:01 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
04:28:01 Check angles
04:28:01 SkyScan query
04:28:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:28:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:28:02 Message to Master queued w/err=0: serial=344164 error=0
04:28:07 Received message from Master: op=Filter serial=344165
04:28:07 Color wheel filter change from 0 to 0
04:28:07 FLIGetFilterPos err=0  currentPosition=0
04:28:07 FLIGetStepsRemaining err=0  RemainingSteps=0
04:28:07 Filter is already there-color wheel unchanged
04:28:07 Received message from Master: op=Shutter serial=344166
04:28:07 Shutter LASER close
04:28:07 Received message from Camera: op=State serial=344168
04:28:07 GetSingleValue result=40  Value=cccccccc
04:28:07 SkyScan query
04:28:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:28:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:28:07 Parameters OK
04:28:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:28:07 Set A/D data flow result=40
04:28:07 Set A/D channel type result=40
04:28:07 Set A/D encoding result=40
04:28:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:28:07 Set channel filter=0.000000e+000  result=40
04:28:07 Config A/D  Result=40
04:28:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:28:07 Get A/D filter: -9.255963e+061  result=40
04:28:07 Get A/D value=-858993460  result=40
04:28:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:28:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:28:07 Parameters OK
04:28:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:28:07 Set A/D data flow result=40
04:28:07 Set A/D channel type result=40
04:28:07 Set A/D encoding result=40
04:28:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:28:07 Set channel filter=0.000000e+000  result=40
04:28:07 Config A/D  Result=40
04:28:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:28:07 Get A/D filter: -9.255963e+061  result=40
04:28:07 Get A/D value=-858993460  result=40
04:28:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:28:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:28:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:28:07 Aux=
04:28:07 Message to Camera, serial 344168 queued
04:28:44 Received message from Master: op=PointingHead serial=344181
04:28:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:28:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:28:45 Point started: ret=0
04:28:45 point_skyscan result=0
04:28:46 Check angles
04:28:46 SkyScan query
04:28:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
04:28:46 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
04:28:46 Message to Master queued w/err=0: serial=344181 error=0
04:28:51 Received message from Master: op=Filter serial=344182
04:28:51 Color wheel filter change from 0 to 0
04:28:51 FLIGetFilterPos err=0  currentPosition=0
04:28:51 FLIGetStepsRemaining err=0  RemainingSteps=0
04:28:51 Filter is already there-color wheel unchanged
04:28:51 Received message from Master: op=Shutter serial=344183
04:28:51 Shutter LASER close
04:28:51 Received message from Camera: op=State serial=344185
04:28:51 GetSingleValue result=40  Value=cccccccc
04:28:51 SkyScan query
04:28:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:28:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:28:52 Parameters OK
04:28:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:28:52 Set A/D data flow result=40
04:28:52 Set A/D channel type result=40
04:28:52 Set A/D encoding result=40
04:28:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:28:52 Set channel filter=0.000000e+000  result=40
04:28:52 Config A/D  Result=40
04:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:28:52 Get A/D filter: -9.255963e+061  result=40
04:28:52 Get A/D value=-858993460  result=40
04:28:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:28:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:28:52 Parameters OK
04:28:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:28:52 Set A/D data flow result=40
04:28:52 Set A/D channel type result=40
04:28:52 Set A/D encoding result=40
04:28:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:28:52 Set channel filter=0.000000e+000  result=40
04:28:52 Config A/D  Result=40
04:28:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:28:52 Get A/D filter: -9.255963e+061  result=40
04:28:52 Get A/D value=-858993460  result=40
04:28:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:28:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:28:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:28:52 Aux=
04:28:52 Message to Camera, serial 344185 queued
04:29:29 Received message from Master: op=PointingHead serial=344198
04:29:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:29:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:29:29 Point started: ret=0
04:29:29 point_skyscan result=0
04:29:30 Check angles
04:29:30 SkyScan query
04:29:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
04:29:30 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
04:29:30 Message to Master queued w/err=0: serial=344198 error=0
04:29:35 Received message from Master: op=Filter serial=344199
04:29:35 Color wheel filter change from 0 to 0
04:29:35 FLIGetFilterPos err=0  currentPosition=0
04:29:35 FLIGetStepsRemaining err=0  RemainingSteps=0
04:29:35 Filter is already there-color wheel unchanged
04:29:36 Received message from Master: op=Shutter serial=344200
04:29:36 Shutter LASER close
04:29:36 Received message from Camera: op=State serial=344202
04:29:36 GetSingleValue result=40  Value=cccccccc
04:29:36 SkyScan query
04:29:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:29:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:29:36 Parameters OK
04:29:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:29:36 Set A/D data flow result=40
04:29:36 Set A/D channel type result=40
04:29:36 Set A/D encoding result=40
04:29:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:29:36 Set channel filter=0.000000e+000  result=40
04:29:36 Config A/D  Result=40
04:29:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:29:36 Get A/D filter: -9.255963e+061  result=40
04:29:36 Get A/D value=-858993460  result=40
04:29:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:29:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:29:36 Parameters OK
04:29:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:29:36 Set A/D data flow result=40
04:29:36 Set A/D channel type result=40
04:29:36 Set A/D encoding result=40
04:29:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:29:36 Set channel filter=0.000000e+000  result=40
04:29:36 Config A/D  Result=40
04:29:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:29:36 Get A/D filter: -9.255963e+061  result=40
04:29:36 Get A/D value=-858993460  result=40
04:29:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:29:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:29:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:29:36 Aux=
04:29:36 Message to Camera, serial 344202 queued
04:30:13 Received message from Master: op=PointingHead serial=344215
04:30:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:30:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:30:13 Point started: ret=0
04:30:13 point_skyscan result=0
04:30:14 Check angles
04:30:14 SkyScan query
04:30:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:30:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:30:15 Message to Master queued w/err=0: serial=344215 error=0
04:30:20 Received message from Master: op=Filter serial=344216
04:30:20 Color wheel filter change from 0 to 0
04:30:20 FLIGetFilterPos err=0  currentPosition=0
04:30:20 FLIGetStepsRemaining err=0  RemainingSteps=0
04:30:20 Filter is already there-color wheel unchanged
04:30:20 Received message from Master: op=Shutter serial=344217
04:30:20 Shutter LASER close
04:30:20 Received message from Camera: op=State serial=344219
04:30:20 GetSingleValue result=40  Value=cccccccc
04:30:20 SkyScan query
04:30:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:30:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:30:20 Parameters OK
04:30:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:30:20 Set A/D data flow result=40
04:30:20 Set A/D channel type result=40
04:30:20 Set A/D encoding result=40
04:30:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:30:20 Set channel filter=0.000000e+000  result=40
04:30:20 Config A/D  Result=40
04:30:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:30:20 Get A/D filter: -9.255963e+061  result=40
04:30:20 Get A/D value=-858993460  result=40
04:30:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:30:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:30:20 Parameters OK
04:30:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:30:20 Set A/D data flow result=40
04:30:20 Set A/D channel type result=40
04:30:20 Set A/D encoding result=40
04:30:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:30:20 Set channel filter=0.000000e+000  result=40
04:30:20 Config A/D  Result=40
04:30:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:30:20 Get A/D filter: -9.255963e+061  result=40
04:30:20 Get A/D value=-858993460  result=40
04:30:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:30:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:30:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:30:20 Aux=
04:30:20 Message to Camera, serial 344219 queued
04:30:57 Received message from Master: op=PointingHead serial=344232
04:30:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:30:57 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:30:58 Point started: ret=0
04:30:58 point_skyscan result=0
04:30:58 Check angles
04:30:58 SkyScan query
04:30:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
04:30:59 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
04:30:59 Check angles
04:30:59 SkyScan query
04:31:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.1<-14940  Statuses=0008 0009
04:31:00 Msec=750  True Az=112.995  Ze=-44.1  Az status=0008  Ze status=0009
04:31:00 Check angles
04:31:00 SkyScan query
04:31:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.07<-16338  Statuses=0008 0009
04:31:00 Msec=1500  True Az=112.995  Ze=-65.07  Az status=0008  Ze status=0009
04:31:01 Check angles
04:31:01 SkyScan query
04:31:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.025<-17735  Statuses=0008 0009
04:31:01 Msec=2250  True Az=112.995  Ze=-86.025  Az status=0008  Ze status=0009
04:31:01 Check angles
04:31:01 SkyScan query
04:31:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.965<-19131  Statuses=0008 0009
04:31:02 Msec=3000  True Az=112.995  Ze=-106.965  Az status=0008  Ze status=0009
04:31:02 Check angles
04:31:02 SkyScan query
04:31:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.92<-20528  Statuses=0008 0009
04:31:03 Msec=3750  True Az=112.995  Ze=-127.92  Az status=0008  Ze status=0009
04:31:03 Check angles
04:31:03 SkyScan query
04:31:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.875<-21925  Statuses=0008 0009
04:31:03 Msec=4500  True Az=112.995  Ze=-148.875  Az status=0008  Ze status=0009
04:31:04 Check angles
04:31:04 SkyScan query
04:31:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.8<-23320  Statuses=0008 0009
04:31:04 Msec=5250  True Az=112.995  Ze=-169.8  Az status=0008  Ze status=0009
04:31:04 Check angles
04:31:04 SkyScan query
04:31:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:31:05 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:31:05 Message to Master queued w/err=0: serial=344232 error=0
04:31:10 Received message from Master: op=Filter serial=344233
04:31:10 Color wheel filter change from 0 to 0
04:31:10 FLIGetFilterPos err=0  currentPosition=0
04:31:10 FLIGetStepsRemaining err=0  RemainingSteps=0
04:31:10 Filter is already there-color wheel unchanged
04:31:10 Received message from Master: op=Shutter serial=344234
04:31:10 Shutter LASER open
04:31:10 Received message from Camera: op=State serial=344236
04:31:10 GetSingleValue result=40  Value=cccccccc
04:31:10 SkyScan query
04:31:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:31:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:11 Parameters OK
04:31:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:11 Set A/D data flow result=40
04:31:11 Set A/D channel type result=40
04:31:11 Set A/D encoding result=40
04:31:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:11 Set channel filter=0.000000e+000  result=40
04:31:11 Config A/D  Result=40
04:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:11 Get A/D filter: -9.255963e+061  result=40
04:31:11 Get A/D value=-858993460  result=40
04:31:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:11 Parameters OK
04:31:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:11 Set A/D data flow result=40
04:31:11 Set A/D channel type result=40
04:31:11 Set A/D encoding result=40
04:31:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:11 Set channel filter=0.000000e+000  result=40
04:31:11 Config A/D  Result=40
04:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:11 Get A/D filter: -9.255963e+061  result=40
04:31:11 Get A/D value=-858993460  result=40
04:31:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:31:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:31:11 Aux=
04:31:11 Message to Camera, serial 344236 queued
04:31:19 Received message from Master: op=Shutter serial=344246
04:31:19 Shutter LASER close
04:31:20 Received message from Master: op=PointingHead serial=344250
04:31:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:31:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:31:20 Point started: ret=0
04:31:20 point_skyscan result=0
04:31:21 Check angles
04:31:21 SkyScan query
04:31:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.34<-21556  Statuses=0008 0009
04:31:22 Msec=0  True Az=112.995  Ze=-143.34  Az status=0008  Ze status=0009
04:31:22 Check angles
04:31:22 SkyScan query
04:31:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.89<-20126  Statuses=0008 0009
04:31:22 Msec=750  True Az=112.995  Ze=-121.89  Az status=0008  Ze status=0009
04:31:23 Check angles
04:31:23 SkyScan query
04:31:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.98<-18732  Statuses=0008 0009
04:31:23 Msec=1500  True Az=112.995  Ze=-100.98  Az status=0008  Ze status=0009
04:31:23 Check angles
04:31:23 SkyScan query
04:31:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.025<-17335  Statuses=0008 0009
04:31:24 Msec=2250  True Az=112.995  Ze=-80.025  Az status=0008  Ze status=0009
04:31:24 Check angles
04:31:24 SkyScan query
04:31:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.085<-15939  Statuses=0008 0009
04:31:25 Msec=3000  True Az=112.995  Ze=-59.085  Az status=0008  Ze status=0009
04:31:25 Check angles
04:31:25 SkyScan query
04:31:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.1<-14540  Statuses=0008 0009
04:31:25 Msec=3750  True Az=112.995  Ze=-38.1  Az status=0008  Ze status=0009
04:31:26 Check angles
04:31:26 SkyScan query
04:31:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.16<-13144  Statuses=0008 0009
04:31:26 Msec=4500  True Az=112.995  Ze=-17.16  Az status=0008  Ze status=0009
04:31:26 Check angles
04:31:26 SkyScan query
04:31:27 SkyScan query done: ret=0  az=112.995<-7533  ze=3.81<-11746  Statuses=0008 0009
04:31:27 Msec=5250  True Az=112.995  Ze=3.81  Az status=0008  Ze status=0009
04:31:27 Check angles
04:31:27 SkyScan query
04:31:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:31:28 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:31:28 Message to Master queued w/err=0: serial=344250 error=0
04:31:33 Received message from Master: op=Filter serial=344251
04:31:33 Color wheel filter change from 0 to 0
04:31:33 FLIGetFilterPos err=0  currentPosition=0
04:31:33 FLIGetStepsRemaining err=0  RemainingSteps=0
04:31:33 Filter is already there-color wheel unchanged
04:31:33 Received message from Master: op=Shutter serial=344252
04:31:33 Shutter LASER close
04:31:33 Received message from Camera: op=State serial=344254
04:31:33 GetSingleValue result=40  Value=cccccccc
04:31:33 SkyScan query
04:31:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:31:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:34 Parameters OK
04:31:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:34 Set A/D data flow result=40
04:31:34 Set A/D channel type result=40
04:31:34 Set A/D encoding result=40
04:31:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:34 Set channel filter=0.000000e+000  result=40
04:31:34 Config A/D  Result=40
04:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:34 Get A/D filter: -9.255963e+061  result=40
04:31:34 Get A/D value=-858993460  result=40
04:31:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:34 Parameters OK
04:31:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:34 Set A/D data flow result=40
04:31:34 Set A/D channel type result=40
04:31:34 Set A/D encoding result=40
04:31:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:34 Set channel filter=0.000000e+000  result=40
04:31:34 Config A/D  Result=40
04:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:34 Get A/D filter: -9.255963e+061  result=40
04:31:34 Get A/D value=-858993460  result=40
04:31:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:31:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:31:34 Aux=
04:31:34 Message to Camera, serial 344254 queued
04:32:10 Received message from Master: op=PointingHead serial=344267
04:32:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:32:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:32:11 Point started: ret=0
04:32:11 point_skyscan result=0
04:32:11 Check angles
04:32:11 SkyScan query
04:32:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
04:32:12 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
04:32:12 Message to Master queued w/err=0: serial=344267 error=0
04:32:17 Received message from Master: op=Filter serial=344268
04:32:17 Color wheel filter change from 0 to 0
04:32:17 FLIGetFilterPos err=0  currentPosition=0
04:32:17 FLIGetStepsRemaining err=0  RemainingSteps=0
04:32:17 Filter is already there-color wheel unchanged
04:32:17 Received message from Master: op=Shutter serial=344269
04:32:17 Shutter LASER close
04:32:17 Received message from Camera: op=State serial=344271
04:32:17 GetSingleValue result=40  Value=cccccccc
04:32:17 SkyScan query
04:32:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:32:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:32:18 Parameters OK
04:32:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:32:18 Set A/D data flow result=40
04:32:18 Set A/D channel type result=40
04:32:18 Set A/D encoding result=40
04:32:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:32:18 Set channel filter=0.000000e+000  result=40
04:32:18 Config A/D  Result=40
04:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:32:18 Get A/D filter: -9.255963e+061  result=40
04:32:18 Get A/D value=-858993460  result=40
04:32:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:32:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:32:18 Parameters OK
04:32:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:32:18 Set A/D data flow result=40
04:32:18 Set A/D channel type result=40
04:32:18 Set A/D encoding result=40
04:32:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:32:18 Set channel filter=0.000000e+000  result=40
04:32:18 Config A/D  Result=40
04:32:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:32:18 Get A/D filter: -9.255963e+061  result=40
04:32:18 Get A/D value=-858993460  result=40
04:32:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:32:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:32:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:32:18 Aux=
04:32:18 Message to Camera, serial 344271 queued
04:32:55 Received message from Master: op=PointingHead serial=344284
04:32:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:32:55 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:32:55 Point started: ret=0
04:32:55 point_skyscan result=0
04:32:56 Check angles
04:32:56 SkyScan query
04:32:56 SkyScan query done: ret=0  az=136.05<-9070  ze=-6.51<-12434  Statuses=0009 0008
04:32:56 Msec=0  True Az=136.05  Ze=-6.51  Az status=0009  Ze status=0008
04:32:56 Check angles
04:32:56 SkyScan query
04:32:57 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
04:32:57 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
04:32:57 Check angles
04:32:57 SkyScan query
04:32:58 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.495<-12433  Statuses=0009 0008
04:32:58 Msec=1500  True Az=171.3  Ze=-6.495  Az status=0009  Ze status=0008
04:32:58 Check angles
04:32:58 SkyScan query
04:32:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:32:59 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
04:32:59 Message to Master queued w/err=0: serial=344284 error=0
04:33:04 Received message from Master: op=Filter serial=344285
04:33:04 Color wheel filter change from 0 to 0
04:33:04 FLIGetFilterPos err=0  currentPosition=0
04:33:04 FLIGetStepsRemaining err=0  RemainingSteps=0
04:33:04 Filter is already there-color wheel unchanged
04:33:04 Received message from Master: op=Shutter serial=344286
04:33:04 Shutter LASER close
04:33:04 Received message from Camera: op=State serial=344288
04:33:04 GetSingleValue result=40  Value=cccccccc
04:33:04 SkyScan query
04:33:04 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:33:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:33:04 Parameters OK
04:33:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:33:04 Set A/D data flow result=40
04:33:04 Set A/D channel type result=40
04:33:04 Set A/D encoding result=40
04:33:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:33:04 Set channel filter=0.000000e+000  result=40
04:33:04 Config A/D  Result=40
04:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:33:04 Get A/D filter: -9.255963e+061  result=40
04:33:04 Get A/D value=-858993460  result=40
04:33:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:33:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:33:04 Parameters OK
04:33:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:33:04 Set A/D data flow result=40
04:33:04 Set A/D channel type result=40
04:33:04 Set A/D encoding result=40
04:33:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:33:04 Set channel filter=0.000000e+000  result=40
04:33:04 Config A/D  Result=40
04:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:33:04 Get A/D filter: -9.255963e+061  result=40
04:33:04 Get A/D value=-858993460  result=40
04:33:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:33:04 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:33:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:33:04 Aux=
04:33:04 Message to Camera, serial 344288 queued
04:33:35 Received message from Master: op=Identify serial=344292
04:33:40 Received message from Master: op=PointingHead serial=344303
04:33:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:33:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:33:41 Point started: ret=0
04:33:41 point_skyscan result=0
04:33:41 Check angles
04:33:41 SkyScan query
04:33:42 SkyScan query done: ret=0  az=152.58<-10172  ze=6.51<-11566  Statuses=0009 0008
04:33:42 Msec=0  True Az=152.58  Ze=6.51  Az status=0009  Ze status=0008
04:33:42 Check angles
04:33:42 SkyScan query
04:33:43 SkyScan query done: ret=0  az=135.15<-9010  ze=6.495<-11567  Statuses=0009 0008
04:33:43 Msec=750  True Az=135.15  Ze=6.495  Az status=0009  Ze status=0008
04:33:43 Check angles
04:33:43 SkyScan query
04:33:43 SkyScan query done: ret=0  az=117.705<-7847  ze=6.495<-11567  Statuses=0009 0008
04:33:43 Msec=1500  True Az=117.705  Ze=6.495  Az status=0009  Ze status=0008
04:33:44 Check angles
04:33:44 SkyScan query
04:33:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:33:44 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:33:44 Message to Master queued w/err=0: serial=344303 error=0
04:33:49 Received message from Master: op=Filter serial=344304
04:33:49 Color wheel filter change from 0 to 0
04:33:49 FLIGetFilterPos err=0  currentPosition=0
04:33:49 FLIGetStepsRemaining err=0  RemainingSteps=0
04:33:49 Filter is already there-color wheel unchanged
04:33:49 Received message from Master: op=Shutter serial=344305
04:33:49 Shutter LASER close
04:33:49 Received message from Camera: op=State serial=344307
04:33:49 GetSingleValue result=40  Value=cccccccc
04:33:49 SkyScan query
04:33:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:33:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:33:50 Parameters OK
04:33:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:33:50 Set A/D data flow result=40
04:33:50 Set A/D channel type result=40
04:33:50 Set A/D encoding result=40
04:33:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:33:50 Set channel filter=0.000000e+000  result=40
04:33:50 Config A/D  Result=40
04:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:33:50 Get A/D filter: -9.255963e+061  result=40
04:33:50 Get A/D value=-858993460  result=40
04:33:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:33:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:33:50 Parameters OK
04:33:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:33:50 Set A/D data flow result=40
[UTC 2019-3-19  04:33:50]
04:33:50 Set A/D channel type result=40
04:33:50 Set A/D encoding result=40
04:33:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:33:50 Set channel filter=0.000000e+000  result=40
04:33:50 Config A/D  Result=40
04:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:33:50 Get A/D filter: -9.255963e+061  result=40
04:33:50 Get A/D value=-858993460  result=40
04:33:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:33:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:33:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:33:50 Aux=
04:33:50 Message to Camera, serial 344307 queued
04:34:27 Received message from Master: op=PointingHead serial=344320
04:34:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:34:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:34:27 Point started: ret=0
04:34:27 point_skyscan result=0
04:34:28 Check angles
04:34:28 SkyScan query
04:34:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.295<-13553  Statuses=0008 0009
04:34:29 Msec=0  True Az=112.995  Ze=-23.295  Az status=0008  Ze status=0009
04:34:29 Check angles
04:34:29 SkyScan query
04:34:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.73<-14982  Statuses=0008 0009
04:34:29 Msec=750  True Az=112.995  Ze=-44.73  Az status=0008  Ze status=0009
04:34:29 Check angles
04:34:29 SkyScan query
04:34:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.655<-16377  Statuses=0008 0009
04:34:30 Msec=1500  True Az=112.995  Ze=-65.655  Az status=0008  Ze status=0009
04:34:30 Check angles
04:34:30 SkyScan query
04:34:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.045<-17803  Statuses=0008 0009
04:34:31 Msec=2250  True Az=112.995  Ze=-87.045  Az status=0008  Ze status=0009
04:34:31 Check angles
04:34:31 SkyScan query
04:34:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.985<-19199  Statuses=0008 0009
04:34:32 Msec=3000  True Az=112.995  Ze=-107.985  Az status=0008  Ze status=0009
04:34:32 Check angles
04:34:32 SkyScan query
04:34:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.94<-20596  Statuses=0008 0009
04:34:32 Msec=3750  True Az=112.995  Ze=-128.94  Az status=0008  Ze status=0009
04:34:33 Check angles
04:34:33 SkyScan query
04:34:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.345<-22023  Statuses=0008 0009
04:34:33 Msec=4500  True Az=112.995  Ze=-150.345  Az status=0008  Ze status=0009
04:34:33 Check angles
04:34:33 SkyScan query
04:34:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.435<-23429  Statuses=0008 0009
04:34:34 Msec=5250  True Az=112.995  Ze=-171.435  Az status=0008  Ze status=0009
04:34:34 Check angles
04:34:34 SkyScan query
04:34:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:34:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:34:35 Message to Master queued w/err=0: serial=344320 error=0
04:34:40 Received message from Master: op=Filter serial=344321
04:34:40 Color wheel filter change from 0 to 0
04:34:40 FLIGetFilterPos err=0  currentPosition=0
04:34:40 FLIGetStepsRemaining err=0  RemainingSteps=0
04:34:40 Filter is already there-color wheel unchanged
04:34:40 Received message from Master: op=Shutter serial=344322
04:34:40 Shutter LASER open
04:34:40 Received message from Camera: op=State serial=344324
04:34:40 GetSingleValue result=40  Value=cccccccc
04:34:40 SkyScan query
04:34:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:34:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:41 Parameters OK
04:34:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:41 Set A/D data flow result=40
04:34:41 Set A/D channel type result=40
04:34:41 Set A/D encoding result=40
04:34:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:41 Set channel filter=0.000000e+000  result=40
04:34:41 Config A/D  Result=40
04:34:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:41 Get A/D filter: -9.255963e+061  result=40
04:34:41 Get A/D value=-858993460  result=40
04:34:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:41 Parameters OK
04:34:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:41 Set A/D data flow result=40
04:34:41 Set A/D channel type result=40
04:34:41 Set A/D encoding result=40
04:34:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:41 Set channel filter=0.000000e+000  result=40
04:34:41 Config A/D  Result=40
04:34:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:41 Get A/D filter: -9.255963e+061  result=40
04:34:41 Get A/D value=-858993460  result=40
04:34:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:34:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:34:41 Aux=
04:34:41 Message to Camera, serial 344324 queued
04:34:49 Received message from Master: op=Shutter serial=344334
04:34:49 Shutter LASER close
04:34:49 Received message from Master: op=PointingHead serial=344338
04:34:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:34:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:34:50 Point started: ret=0
04:34:50 point_skyscan result=0
04:34:50 Check angles
04:34:50 SkyScan query
04:34:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.695<-21513  Statuses=0008 0009
04:34:51 Msec=0  True Az=112.995  Ze=-142.695  Az status=0008  Ze status=0009
04:34:51 Check angles
04:34:51 SkyScan query
04:34:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.305<-20087  Statuses=0008 0009
04:34:52 Msec=750  True Az=112.995  Ze=-121.305  Az status=0008  Ze status=0009
04:34:52 Check angles
04:34:52 SkyScan query
04:34:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-99.87<-18658  Statuses=0008 0009
04:34:53 Msec=1500  True Az=112.995  Ze=-99.87  Az status=0008  Ze status=0009
04:34:53 Check angles
04:34:53 SkyScan query
04:34:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-78.915<-17261  Statuses=0008 0009
04:34:53 Msec=2250  True Az=112.995  Ze=-78.915  Az status=0008  Ze status=0009
04:34:54 Check angles
04:34:54 SkyScan query
04:34:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.96<-15864  Statuses=0008 0009
04:34:54 Msec=3000  True Az=112.995  Ze=-57.96  Az status=0008  Ze status=0009
04:34:54 Check angles
04:34:54 SkyScan query
04:34:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.035<-14469  Statuses=0008 0009
04:34:55 Msec=3750  True Az=112.995  Ze=-37.035  Az status=0008  Ze status=0009
04:34:55 Check angles
04:34:55 SkyScan query
04:34:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.05<-13070  Statuses=0008 0009
04:34:56 Msec=4500  True Az=112.995  Ze=-16.05  Az status=0008  Ze status=0009
04:34:56 Check angles
04:34:56 SkyScan query
04:34:56 SkyScan query done: ret=0  az=112.995<-7533  ze=4.71<-11686  Statuses=0008 0009
04:34:56 Msec=5250  True Az=112.995  Ze=4.71  Az status=0008  Ze status=0009
04:34:57 Check angles
04:34:57 SkyScan query
04:34:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:34:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:34:57 Message to Master queued w/err=0: serial=344338 error=0
04:35:02 Received message from Master: op=Filter serial=344339
04:35:02 Color wheel filter change from 0 to 0
04:35:02 FLIGetFilterPos err=0  currentPosition=0
04:35:02 FLIGetStepsRemaining err=0  RemainingSteps=0
04:35:02 Filter is already there-color wheel unchanged
04:35:02 Received message from Master: op=Shutter serial=344340
04:35:02 Shutter LASER close
04:35:02 Received message from Camera: op=State serial=344342
04:35:02 GetSingleValue result=40  Value=cccccccc
04:35:02 SkyScan query
04:35:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:35:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:35:03 Parameters OK
04:35:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:35:03 Set A/D data flow result=40
04:35:03 Set A/D channel type result=40
04:35:03 Set A/D encoding result=40
04:35:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:35:03 Set channel filter=0.000000e+000  result=40
04:35:03 Config A/D  Result=40
04:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:35:03 Get A/D filter: -9.255963e+061  result=40
04:35:03 Get A/D value=-858993460  result=40
04:35:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:35:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:35:03 Parameters OK
04:35:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:35:03 Set A/D data flow result=40
04:35:03 Set A/D channel type result=40
04:35:03 Set A/D encoding result=40
04:35:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:35:03 Set channel filter=0.000000e+000  result=40
04:35:03 Config A/D  Result=40
04:35:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:35:03 Get A/D filter: -9.255963e+061  result=40
04:35:03 Get A/D value=-858993460  result=40
04:35:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:35:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:35:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:35:03 Aux=
04:35:03 Message to Camera, serial 344342 queued
04:35:40 Received message from Master: op=PointingHead serial=344355
04:35:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:35:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:35:40 Point started: ret=0
04:35:40 point_skyscan result=0
04:35:41 Check angles
04:35:41 SkyScan query
04:35:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
04:35:42 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
04:35:42 Message to Master queued w/err=0: serial=344355 error=0
04:35:47 Received message from Master: op=Filter serial=344356
04:35:47 Color wheel filter change from 0 to 0
04:35:47 FLIGetFilterPos err=0  currentPosition=0
04:35:47 FLIGetStepsRemaining err=0  RemainingSteps=0
04:35:47 Filter is already there-color wheel unchanged
04:35:47 Received message from Master: op=Shutter serial=344357
04:35:47 Shutter LASER close
04:35:47 Received message from Camera: op=State serial=344359
04:35:47 GetSingleValue result=40  Value=cccccccc
04:35:47 SkyScan query
04:35:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:35:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:35:47 Parameters OK
04:35:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:35:47 Set A/D data flow result=40
04:35:47 Set A/D channel type result=40
04:35:47 Set A/D encoding result=40
04:35:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:35:47 Set channel filter=0.000000e+000  result=40
04:35:47 Config A/D  Result=40
04:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:35:47 Get A/D filter: -9.255963e+061  result=40
04:35:47 Get A/D value=-858993460  result=40
04:35:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:35:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:35:47 Parameters OK
04:35:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:35:47 Set A/D data flow result=40
04:35:47 Set A/D channel type result=40
04:35:47 Set A/D encoding result=40
04:35:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:35:47 Set channel filter=0.000000e+000  result=40
04:35:47 Config A/D  Result=40
04:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:35:47 Get A/D filter: -9.255963e+061  result=40
04:35:47 Get A/D value=-858993460  result=40
04:35:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:35:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:35:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:35:47 Aux=
04:35:47 Message to Camera, serial 344359 queued
04:36:24 Received message from Master: op=PointingHead serial=344372
04:36:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:36:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:36:25 Point started: ret=0
04:36:25 point_skyscan result=0
04:36:25 Check angles
04:36:25 SkyScan query
04:36:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:36:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:36:26 Message to Master queued w/err=0: serial=344372 error=0
04:36:31 Received message from Master: op=Filter serial=344373
04:36:31 Color wheel filter change from 0 to 0
04:36:31 FLIGetFilterPos err=0  currentPosition=0
04:36:31 FLIGetStepsRemaining err=0  RemainingSteps=0
04:36:31 Filter is already there-color wheel unchanged
04:36:31 Received message from Master: op=Shutter serial=344374
04:36:31 Shutter LASER close
04:36:31 Received message from Camera: op=State serial=344376
04:36:31 GetSingleValue result=40  Value=cccccccc
04:36:31 SkyScan query
04:36:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:36:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:36:32 Parameters OK
04:36:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:36:32 Set A/D data flow result=40
04:36:32 Set A/D channel type result=40
04:36:32 Set A/D encoding result=40
04:36:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:36:32 Set channel filter=0.000000e+000  result=40
04:36:32 Config A/D  Result=40
04:36:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:36:32 Get A/D filter: -9.255963e+061  result=40
04:36:32 Get A/D value=-858993460  result=40
04:36:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:36:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:36:32 Parameters OK
04:36:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:36:32 Set A/D data flow result=40
04:36:32 Set A/D channel type result=40
04:36:32 Set A/D encoding result=40
04:36:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:36:32 Set channel filter=0.000000e+000  result=40
04:36:32 Config A/D  Result=40
04:36:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:36:32 Get A/D filter: -9.255963e+061  result=40
04:36:32 Get A/D value=-858993460  result=40
04:36:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:36:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:36:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:36:32 Aux=
04:36:32 Message to Camera, serial 344376 queued
04:37:08 Received message from Master: op=PointingHead serial=344389
04:37:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:37:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:37:09 Point started: ret=0
04:37:09 point_skyscan result=0
04:37:10 Check angles
04:37:10 SkyScan query
04:37:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:37:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:37:10 Message to Master queued w/err=0: serial=344389 error=0
04:37:15 Received message from Master: op=Filter serial=344390
04:37:15 Color wheel filter change from 0 to 0
04:37:15 FLIGetFilterPos err=0  currentPosition=0
04:37:15 FLIGetStepsRemaining err=0  RemainingSteps=0
04:37:15 Filter is already there-color wheel unchanged
04:37:15 Received message from Master: op=Shutter serial=344391
04:37:15 Shutter LASER close
04:37:15 Received message from Camera: op=State serial=344393
04:37:15 GetSingleValue result=40  Value=cccccccc
04:37:15 SkyScan query
04:37:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:37:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:37:16 Parameters OK
04:37:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:37:16 Set A/D data flow result=40
04:37:16 Set A/D channel type result=40
04:37:16 Set A/D encoding result=40
04:37:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:37:16 Set channel filter=0.000000e+000  result=40
04:37:16 Config A/D  Result=40
04:37:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:37:16 Get A/D filter: -9.255963e+061  result=40
04:37:16 Get A/D value=-858993460  result=40
04:37:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:37:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:37:16 Parameters OK
04:37:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:37:16 Set A/D data flow result=40
04:37:16 Set A/D channel type result=40
04:37:16 Set A/D encoding result=40
04:37:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:37:16 Set channel filter=0.000000e+000  result=40
04:37:16 Config A/D  Result=40
04:37:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:37:16 Get A/D filter: -9.255963e+061  result=40
04:37:16 Get A/D value=-858993460  result=40
04:37:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:37:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:37:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:37:16 Aux=
04:37:16 Message to Camera, serial 344393 queued
04:37:53 Received message from Master: op=PointingHead serial=344406
04:37:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:37:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:37:53 Point started: ret=0
04:37:53 point_skyscan result=0
04:37:54 Check angles
04:37:54 SkyScan query
04:37:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.865<-13591  Statuses=0008 0009
04:37:54 Msec=0  True Az=112.995  Ze=-23.865  Az status=0008  Ze status=0009
04:37:55 Check angles
04:37:55 SkyScan query
04:37:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.82<-14988  Statuses=0008 0009
04:37:55 Msec=750  True Az=112.995  Ze=-44.82  Az status=0008  Ze status=0009
04:37:55 Check angles
04:37:55 SkyScan query
04:37:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.76<-16384  Statuses=0008 0009
04:37:56 Msec=1500  True Az=112.995  Ze=-65.76  Az status=0008  Ze status=0009
04:37:56 Check angles
04:37:56 SkyScan query
04:37:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
04:37:57 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
04:37:57 Check angles
04:37:57 SkyScan query
04:37:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.685<-19179  Statuses=0008 0009
04:37:57 Msec=3000  True Az=112.995  Ze=-107.685  Az status=0008  Ze status=0009
04:37:58 Check angles
04:37:58 SkyScan query
04:37:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.61<-20574  Statuses=0008 0009
04:37:58 Msec=3750  True Az=112.995  Ze=-128.61  Az status=0008  Ze status=0009
04:37:58 Check angles
04:37:58 SkyScan query
04:37:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.015<-22001  Statuses=0008 0009
04:37:59 Msec=4500  True Az=112.995  Ze=-150.015  Az status=0008  Ze status=0009
04:37:59 Check angles
04:37:59 SkyScan query
04:38:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.865<-23391  Statuses=0008 0009
04:38:00 Msec=5250  True Az=112.995  Ze=-170.865  Az status=0008  Ze status=0009
04:38:00 Check angles
04:38:00 SkyScan query
04:38:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:38:00 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:38:00 Message to Master queued w/err=0: serial=344406 error=0
04:38:05 Received message from Master: op=Filter serial=344407
04:38:05 Color wheel filter change from 0 to 0
04:38:05 FLIGetFilterPos err=0  currentPosition=0
04:38:05 FLIGetStepsRemaining err=0  RemainingSteps=0
04:38:05 Filter is already there-color wheel unchanged
04:38:06 Received message from Master: op=Shutter serial=344408
04:38:06 Shutter LASER open
04:38:06 Received message from Camera: op=State serial=344410
04:38:06 GetSingleValue result=40  Value=cccccccc
04:38:06 SkyScan query
04:38:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:38:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:06 Parameters OK
04:38:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:06 Set A/D data flow result=40
04:38:06 Set A/D channel type result=40
04:38:06 Set A/D encoding result=40
04:38:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:06 Set channel filter=0.000000e+000  result=40
04:38:06 Config A/D  Result=40
04:38:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:06 Get A/D filter: -9.255963e+061  result=40
04:38:06 Get A/D value=-858993460  result=40
04:38:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:06 Parameters OK
04:38:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:06 Set A/D data flow result=40
04:38:06 Set A/D channel type result=40
04:38:06 Set A/D encoding result=40
04:38:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:06 Set channel filter=0.000000e+000  result=40
04:38:06 Config A/D  Result=40
04:38:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:06 Get A/D filter: -9.255963e+061  result=40
04:38:06 Get A/D value=-858993460  result=40
04:38:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:38:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:38:06 Aux=
04:38:06 Message to Camera, serial 344410 queued
04:38:14 Received message from Master: op=Shutter serial=344419
04:38:14 Shutter LASER close
04:38:14 Received message from Master: op=PointingHead serial=344423
04:38:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:38:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:38:15 Point started: ret=0
04:38:15 point_skyscan result=0
04:38:16 Check angles
04:38:16 SkyScan query
04:38:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.325<-21555  Statuses=0008 0009
04:38:16 Msec=0  True Az=112.995  Ze=-143.325  Az status=0008  Ze status=0009
04:38:16 Check angles
04:38:16 SkyScan query
04:38:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.92<-20128  Statuses=0008 0009
04:38:17 Msec=750  True Az=112.995  Ze=-121.92  Az status=0008  Ze status=0009
04:38:17 Check angles
04:38:17 SkyScan query
04:38:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.545<-18703  Statuses=0008 0009
04:38:18 Msec=1500  True Az=112.995  Ze=-100.545  Az status=0008  Ze status=0009
04:38:18 Check angles
04:38:18 SkyScan query
04:38:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.59<-17306  Statuses=0008 0009
04:38:18 Msec=2250  True Az=112.995  Ze=-79.59  Az status=0008  Ze status=0009
04:38:19 Check angles
04:38:19 SkyScan query
04:38:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.635<-15909  Statuses=0008 0009
04:38:19 Msec=3000  True Az=112.995  Ze=-58.635  Az status=0008  Ze status=0009
04:38:19 Check angles
04:38:19 SkyScan query
04:38:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.68<-14512  Statuses=0008 0009
04:38:20 Msec=3750  True Az=112.995  Ze=-37.68  Az status=0008  Ze status=0009
04:38:20 Check angles
04:38:20 SkyScan query
04:38:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.725<-13115  Statuses=0008 0009
04:38:21 Msec=4500  True Az=112.995  Ze=-16.725  Az status=0008  Ze status=0009
04:38:21 Check angles
04:38:21 SkyScan query
04:38:21 SkyScan query done: ret=0  az=112.995<-7533  ze=4.185<-11721  Statuses=0008 0009
04:38:21 Msec=5250  True Az=112.995  Ze=4.185  Az status=0008  Ze status=0009
04:38:22 Check angles
04:38:22 SkyScan query
04:38:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:38:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:38:22 Message to Master queued w/err=0: serial=344423 error=0
04:38:27 Received message from Master: op=Filter serial=344424
04:38:27 Color wheel filter change from 0 to 0
04:38:27 FLIGetFilterPos err=0  currentPosition=0
04:38:27 FLIGetStepsRemaining err=0  RemainingSteps=0
04:38:27 Filter is already there-color wheel unchanged
04:38:27 Received message from Master: op=Shutter serial=344425
04:38:27 Shutter LASER close
04:38:28 Received message from Camera: op=State serial=344427
04:38:28 GetSingleValue result=40  Value=cccccccc
04:38:28 SkyScan query
04:38:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:38:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:28 Parameters OK
04:38:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:28 Set A/D data flow result=40
04:38:28 Set A/D channel type result=40
04:38:28 Set A/D encoding result=40
04:38:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:28 Set channel filter=0.000000e+000  result=40
04:38:28 Config A/D  Result=40
04:38:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:28 Get A/D filter: -9.255963e+061  result=40
04:38:28 Get A/D value=-858993460  result=40
04:38:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:28 Parameters OK
04:38:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:28 Set A/D data flow result=40
04:38:28 Set A/D channel type result=40
04:38:28 Set A/D encoding result=40
04:38:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:28 Set channel filter=0.000000e+000  result=40
04:38:28 Config A/D  Result=40
04:38:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:28 Get A/D filter: -9.255963e+061  result=40
04:38:28 Get A/D value=-858993460  result=40
04:38:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:38:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:38:28 Aux=
04:38:28 Message to Camera, serial 344427 queued
04:39:04 Received message from Master: op=PointingHead serial=344439
04:39:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:39:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:39:04 Point started: ret=0
04:39:04 point_skyscan result=0
04:39:05 Check angles
04:39:05 SkyScan query
04:39:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:39:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:39:06 Message to Master queued w/err=0: serial=344439 error=0
04:39:11 Received message from Master: op=Filter serial=344440
04:39:11 Color wheel filter change from 0 to 0
04:39:11 FLIGetFilterPos err=0  currentPosition=0
04:39:11 FLIGetStepsRemaining err=0  RemainingSteps=0
04:39:11 Filter is already there-color wheel unchanged
04:39:11 Received message from Master: op=Shutter serial=344441
04:39:11 Shutter LASER close
04:39:11 Received message from Camera: op=State serial=344443
04:39:11 GetSingleValue result=40  Value=cccccccc
04:39:11 SkyScan query
04:39:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:39:11 Parameters OK
04:39:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:39:11 Set A/D data flow result=40
04:39:11 Set A/D channel type result=40
04:39:11 Set A/D encoding result=40
04:39:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:39:11 Set channel filter=0.000000e+000  result=40
04:39:11 Config A/D  Result=40
04:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:39:11 Get A/D filter: -9.255963e+061  result=40
04:39:11 Get A/D value=-858993460  result=40
04:39:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:39:11 Parameters OK
04:39:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:39:11 Set A/D data flow result=40
04:39:11 Set A/D channel type result=40
04:39:11 Set A/D encoding result=40
04:39:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:39:11 Set channel filter=0.000000e+000  result=40
04:39:11 Config A/D  Result=40
04:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:39:11 Get A/D filter: -9.255963e+061  result=40
04:39:11 Get A/D value=-858993460  result=40
04:39:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:39:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:39:11 Aux=
04:39:11 Message to Camera, serial 344443 queued
04:39:48 Received message from Master: op=PointingHead serial=344456
04:39:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:39:48 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:39:49 Point started: ret=0
04:39:49 point_skyscan result=0
04:39:49 Check angles
04:39:49 SkyScan query
04:39:50 SkyScan query done: ret=0  az=136.275<-9085  ze=-6.51<-12434  Statuses=0009 0008
04:39:50 Msec=0  True Az=136.275  Ze=-6.51  Az status=0009  Ze status=0008
04:39:50 Check angles
04:39:50 SkyScan query
04:39:51 SkyScan query done: ret=0  az=154.08<-10272  ze=-6.495<-12433  Statuses=0009 0008
04:39:51 Msec=750  True Az=154.08  Ze=-6.495  Az status=0009  Ze status=0008
04:39:51 Check angles
04:39:51 SkyScan query
04:39:51 SkyScan query done: ret=0  az=171.525<-11435  ze=-6.495<-12433  Statuses=0009 0008
04:39:51 Msec=1500  True Az=171.525  Ze=-6.495  Az status=0009  Ze status=0008
04:39:52 Check angles
04:39:52 SkyScan query
04:39:52 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:39:52 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
04:39:52 Message to Master queued w/err=0: serial=344456 error=0
04:39:57 Received message from Master: op=Filter serial=344457
04:39:57 Color wheel filter change from 0 to 0
04:39:57 FLIGetFilterPos err=0  currentPosition=0
04:39:57 FLIGetStepsRemaining err=0  RemainingSteps=0
04:39:57 Filter is already there-color wheel unchanged
04:39:57 Received message from Master: op=Shutter serial=344458
04:39:57 Shutter LASER close
04:39:57 Received message from Camera: op=State serial=344460
04:39:57 GetSingleValue result=40  Value=cccccccc
04:39:57 SkyScan query
04:39:58 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:39:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:39:58 Parameters OK
04:39:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:39:58 Set A/D data flow result=40
04:39:58 Set A/D channel type result=40
04:39:58 Set A/D encoding result=40
04:39:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:39:58 Set channel filter=0.000000e+000  result=40
04:39:58 Config A/D  Result=40
04:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:39:58 Get A/D filter: -9.255963e+061  result=40
04:39:58 Get A/D value=-858993460  result=40
04:39:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:39:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:39:58 Parameters OK
04:39:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:39:58 Set A/D data flow result=40
04:39:58 Set A/D channel type result=40
04:39:58 Set A/D encoding result=40
04:39:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:39:58 Set channel filter=0.000000e+000  result=40
04:39:58 Config A/D  Result=40
04:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:39:58 Get A/D filter: -9.255963e+061  result=40
04:39:58 Get A/D value=-858993460  result=40
04:39:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:39:58 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:39:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:39:58 Aux=
04:39:58 Message to Camera, serial 344460 queued
04:40:35 Received message from Master: op=PointingHead serial=344473
04:40:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:40:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:40:35 Point started: ret=0
04:40:35 point_skyscan result=0
04:40:36 Check angles
04:40:36 SkyScan query
04:40:37 SkyScan query done: ret=0  az=152.925<-10195  ze=6.51<-11566  Statuses=0009 0008
04:40:37 Msec=0  True Az=152.925  Ze=6.51  Az status=0009  Ze status=0008
04:40:37 Check angles
04:40:37 SkyScan query
04:40:37 SkyScan query done: ret=0  az=135.12<-9008  ze=6.495<-11567  Statuses=0009 0008
04:40:37 Msec=750  True Az=135.12  Ze=6.495  Az status=0009  Ze status=0008
04:40:37 Check angles
04:40:37 SkyScan query
04:40:38 SkyScan query done: ret=0  az=117.645<-7843  ze=6.495<-11567  Statuses=0009 0008
04:40:38 Msec=1500  True Az=117.645  Ze=6.495  Az status=0009  Ze status=0008
04:40:38 Check angles
04:40:38 SkyScan query
04:40:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:40:39 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:40:39 Message to Master queued w/err=0: serial=344473 error=0
04:40:44 Received message from Master: op=Filter serial=344474
04:40:44 Color wheel filter change from 0 to 0
04:40:44 FLIGetFilterPos err=0  currentPosition=0
04:40:44 FLIGetStepsRemaining err=0  RemainingSteps=0
04:40:44 Filter is already there-color wheel unchanged
04:40:44 Received message from Master: op=Shutter serial=344475
04:40:44 Shutter LASER close
04:40:44 Received message from Camera: op=State serial=344477
04:40:44 GetSingleValue result=40  Value=cccccccc
04:40:44 SkyScan query
04:40:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:40:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:40:45 Parameters OK
04:40:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:40:45 Set A/D data flow result=40
04:40:45 Set A/D channel type result=40
04:40:45 Set A/D encoding result=40
04:40:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:40:45 Set channel filter=0.000000e+000  result=40
04:40:45 Config A/D  Result=40
04:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:40:45 Get A/D filter: -9.255963e+061  result=40
04:40:45 Get A/D value=-858993460  result=40
04:40:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:40:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:40:45 Parameters OK
04:40:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:40:45 Set A/D data flow result=40
04:40:45 Set A/D channel type result=40
04:40:45 Set A/D encoding result=40
04:40:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:40:45 Set channel filter=0.000000e+000  result=40
04:40:45 Config A/D  Result=40
04:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:40:45 Get A/D filter: -9.255963e+061  result=40
04:40:45 Get A/D value=-858993460  result=40
04:40:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:40:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:40:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:40:45 Aux=
04:40:45 Message to Camera, serial 344477 queued
04:41:21 Received message from Master: op=PointingHead serial=344490
04:41:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:41:21 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:41:22 Point started: ret=0
04:41:22 point_skyscan result=0
04:41:23 Check angles
04:41:23 SkyScan query
04:41:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
04:41:23 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
04:41:23 Check angles
04:41:23 SkyScan query
04:41:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.37<-14958  Statuses=0008 0009
04:41:24 Msec=750  True Az=112.995  Ze=-44.37  Az status=0008  Ze status=0009
04:41:24 Check angles
04:41:24 SkyScan query
04:41:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
04:41:25 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
04:41:25 Check angles
04:41:25 SkyScan query
04:41:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.28<-17752  Statuses=0008 0009
04:41:25 Msec=2250  True Az=112.995  Ze=-86.28  Az status=0008  Ze status=0009
04:41:26 Check angles
04:41:26 SkyScan query
04:41:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.22<-19148  Statuses=0008 0009
04:41:26 Msec=3000  True Az=112.995  Ze=-107.22  Az status=0008  Ze status=0009
04:41:26 Check angles
04:41:26 SkyScan query
04:41:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.175<-20545  Statuses=0008 0009
04:41:27 Msec=3750  True Az=112.995  Ze=-128.175  Az status=0008  Ze status=0009
04:41:27 Check angles
04:41:27 SkyScan query
04:41:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.565<-21971  Statuses=0008 0009
04:41:28 Msec=4500  True Az=112.995  Ze=-149.565  Az status=0008  Ze status=0009
04:41:28 Check angles
04:41:28 SkyScan query
04:41:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.49<-23366  Statuses=0008 0009
04:41:28 Msec=5250  True Az=112.995  Ze=-170.49  Az status=0008  Ze status=0009
04:41:29 Check angles
04:41:29 SkyScan query
04:41:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:41:29 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:41:29 Message to Master queued w/err=0: serial=344490 error=0
04:41:34 Received message from Master: op=Filter serial=344491
04:41:34 Color wheel filter change from 0 to 0
04:41:34 FLIGetFilterPos err=0  currentPosition=0
04:41:34 FLIGetStepsRemaining err=0  RemainingSteps=0
04:41:34 Filter is already there-color wheel unchanged
04:41:34 Received message from Master: op=Shutter serial=344492
04:41:34 Shutter LASER open
04:41:34 Received message from Camera: op=State serial=344494
04:41:34 GetSingleValue result=40  Value=cccccccc
04:41:34 SkyScan query
04:41:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:35 Parameters OK
04:41:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:35 Set A/D data flow result=40
04:41:35 Set A/D channel type result=40
04:41:35 Set A/D encoding result=40
04:41:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:35 Set channel filter=0.000000e+000  result=40
04:41:35 Config A/D  Result=40
04:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:35 Get A/D filter: -9.255963e+061  result=40
04:41:35 Get A/D value=-858993460  result=40
04:41:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:35 Parameters OK
04:41:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:35 Set A/D data flow result=40
04:41:35 Set A/D channel type result=40
04:41:35 Set A/D encoding result=40
04:41:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:35 Set channel filter=0.000000e+000  result=40
04:41:35 Config A/D  Result=40
04:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:35 Get A/D filter: -9.255963e+061  result=40
04:41:35 Get A/D value=-858993460  result=40
04:41:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:41:35 Aux=
04:41:35 Message to Camera, serial 344494 queued
04:41:43 Received message from Master: op=Shutter serial=344504
04:41:43 Shutter LASER close
04:41:44 Received message from Master: op=PointingHead serial=344508
04:41:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:41:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:41:44 Point started: ret=0
04:41:44 point_skyscan result=0
04:41:45 Check angles
04:41:45 SkyScan query
04:41:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.875<-21525  Statuses=0008 0009
04:41:46 Msec=0  True Az=112.995  Ze=-142.875  Az status=0008  Ze status=0009
04:41:46 Check angles
04:41:46 SkyScan query
04:41:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.485<-20099  Statuses=0008 0009
04:41:46 Msec=750  True Az=112.995  Ze=-121.485  Az status=0008  Ze status=0009
04:41:47 Check angles
04:41:47 SkyScan query
04:41:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.53<-18702  Statuses=0008 0009
04:41:47 Msec=1500  True Az=112.995  Ze=-100.53  Az status=0008  Ze status=0009
04:41:47 Check angles
04:41:47 SkyScan query
04:41:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.575<-17305  Statuses=0008 0009
04:41:48 Msec=2250  True Az=112.995  Ze=-79.575  Az status=0008  Ze status=0009
04:41:48 Check angles
04:41:48 SkyScan query
04:41:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.17<-15878  Statuses=0008 0009
04:41:49 Msec=3000  True Az=112.995  Ze=-58.17  Az status=0008  Ze status=0009
04:41:49 Check angles
04:41:49 SkyScan query
04:41:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.23<-14482  Statuses=0008 0009
04:41:49 Msec=3750  True Az=112.995  Ze=-37.23  Az status=0008  Ze status=0009
04:41:50 Check angles
04:41:50 SkyScan query
04:41:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.26<-13084  Statuses=0008 0009
04:41:50 Msec=4500  True Az=112.995  Ze=-16.26  Az status=0008  Ze status=0009
04:41:50 Check angles
04:41:50 SkyScan query
04:41:51 SkyScan query done: ret=0  az=112.995<-7533  ze=4.56<-11696  Statuses=0008 0009
04:41:51 Msec=5250  True Az=112.995  Ze=4.56  Az status=0008  Ze status=0009
04:41:51 Check angles
04:41:51 SkyScan query
04:41:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:41:52 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:41:52 Message to Master queued w/err=0: serial=344508 error=0
04:41:57 Received message from Master: op=Filter serial=344509
04:41:57 Color wheel filter change from 0 to 0
04:41:57 FLIGetFilterPos err=0  currentPosition=0
04:41:57 FLIGetStepsRemaining err=0  RemainingSteps=0
04:41:57 Filter is already there-color wheel unchanged
04:41:57 Received message from Master: op=Shutter serial=344510
04:41:57 Shutter LASER close
04:41:57 Received message from Camera: op=State serial=344512
04:41:57 GetSingleValue result=40  Value=cccccccc
04:41:57 SkyScan query
04:41:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:41:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:58 Parameters OK
04:41:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:58 Set A/D data flow result=40
04:41:58 Set A/D channel type result=40
04:41:58 Set A/D encoding result=40
04:41:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:58 Set channel filter=0.000000e+000  result=40
04:41:58 Config A/D  Result=40
04:41:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:58 Get A/D filter: -9.255963e+061  result=40
04:41:58 Get A/D value=-858993460  result=40
04:41:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:58 Parameters OK
04:41:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:58 Set A/D data flow result=40
04:41:58 Set A/D channel type result=40
04:41:58 Set A/D encoding result=40
04:41:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:58 Set channel filter=0.000000e+000  result=40
04:41:58 Config A/D  Result=40
04:41:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:58 Get A/D filter: -9.255963e+061  result=40
04:41:58 Get A/D value=-858993460  result=40
04:41:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:41:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:41:58 Aux=
04:41:58 Message to Camera, serial 344512 queued
04:42:34 Received message from Master: op=PointingHead serial=344525
04:42:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:42:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:42:35 Point started: ret=0
04:42:35 point_skyscan result=0
04:42:36 Check angles
04:42:36 SkyScan query
04:42:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:42:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:42:36 Message to Master queued w/err=0: serial=344525 error=0
04:42:41 Received message from Master: op=Filter serial=344526
04:42:41 Color wheel filter change from 0 to 0
04:42:41 FLIGetFilterPos err=0  currentPosition=0
04:42:41 FLIGetStepsRemaining err=0  RemainingSteps=0
04:42:41 Filter is already there-color wheel unchanged
04:42:41 Received message from Master: op=Shutter serial=344527
04:42:41 Shutter LASER close
04:42:41 Received message from Camera: op=State serial=344529
04:42:41 GetSingleValue result=40  Value=cccccccc
04:42:41 SkyScan query
04:42:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:42:42 Parameters OK
04:42:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:42:42 Set A/D data flow result=40
04:42:42 Set A/D channel type result=40
04:42:42 Set A/D encoding result=40
04:42:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:42:42 Set channel filter=0.000000e+000  result=40
04:42:42 Config A/D  Result=40
04:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:42:42 Get A/D filter: -9.255963e+061  result=40
04:42:42 Get A/D value=-858993460  result=40
04:42:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:42:42 Parameters OK
04:42:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:42:42 Set A/D data flow result=40
04:42:42 Set A/D channel type result=40
04:42:42 Set A/D encoding result=40
04:42:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:42:42 Set channel filter=0.000000e+000  result=40
04:42:42 Config A/D  Result=40
04:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:42:42 Get A/D filter: -9.255963e+061  result=40
04:42:42 Get A/D value=-858993460  result=40
04:42:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:42:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:42:42 Aux=
04:42:42 Message to Camera, serial 344529 queued
04:43:19 Received message from Master: op=PointingHead serial=344542
04:43:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:43:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:43:19 Point started: ret=0
04:43:19 point_skyscan result=0
04:43:20 Check angles
04:43:20 SkyScan query
04:43:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:43:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:43:20 Message to Master queued w/err=0: serial=344542 error=0
04:43:25 Received message from Master: op=Filter serial=344543
04:43:25 Color wheel filter change from 0 to 0
04:43:25 FLIGetFilterPos err=0  currentPosition=0
04:43:25 FLIGetStepsRemaining err=0  RemainingSteps=0
04:43:25 Filter is already there-color wheel unchanged
04:43:26 Received message from Master: op=Shutter serial=344544
04:43:26 Shutter LASER close
04:43:26 Received message from Camera: op=State serial=344546
04:43:26 GetSingleValue result=40  Value=cccccccc
04:43:26 SkyScan query
04:43:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:43:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:43:26 Parameters OK
04:43:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:43:26 Set A/D data flow result=40
04:43:26 Set A/D channel type result=40
04:43:26 Set A/D encoding result=40
04:43:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:43:26 Set channel filter=0.000000e+000  result=40
04:43:26 Config A/D  Result=40
04:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:43:26 Get A/D filter: -9.255963e+061  result=40
04:43:26 Get A/D value=-858993460  result=40
04:43:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:43:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:43:26 Parameters OK
04:43:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:43:26 Set A/D data flow result=40
04:43:26 Set A/D channel type result=40
04:43:26 Set A/D encoding result=40
04:43:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:43:26 Set channel filter=0.000000e+000  result=40
04:43:26 Config A/D  Result=40
04:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:43:26 Get A/D filter: -9.255963e+061  result=40
04:43:26 Get A/D value=-858993460  result=40
04:43:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:43:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:43:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:43:26 Aux=
04:43:26 Message to Camera, serial 344546 queued
[UTC 2019-3-19  04:43:48]
04:44:03 Received message from Master: op=PointingHead serial=344559
04:44:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:44:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:44:03 Point started: ret=0
04:44:03 point_skyscan result=0
04:44:04 Check angles
04:44:04 SkyScan query
04:44:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:44:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:44:05 Message to Master queued w/err=0: serial=344559 error=0
04:44:10 Received message from Master: op=Filter serial=344560
04:44:10 Color wheel filter change from 0 to 0
04:44:10 FLIGetFilterPos err=0  currentPosition=0
04:44:10 FLIGetStepsRemaining err=0  RemainingSteps=0
04:44:10 Filter is already there-color wheel unchanged
04:44:10 Received message from Master: op=Shutter serial=344561
04:44:10 Shutter LASER close
04:44:10 Received message from Camera: op=State serial=344563
04:44:10 GetSingleValue result=40  Value=cccccccc
04:44:10 SkyScan query
04:44:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:44:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:44:10 Parameters OK
04:44:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:44:10 Set A/D data flow result=40
04:44:10 Set A/D channel type result=40
04:44:10 Set A/D encoding result=40
04:44:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:44:10 Set channel filter=0.000000e+000  result=40
04:44:10 Config A/D  Result=40
04:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:44:10 Get A/D filter: -9.255963e+061  result=40
04:44:10 Get A/D value=-858993460  result=40
04:44:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:44:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:44:10 Parameters OK
04:44:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:44:10 Set A/D data flow result=40
04:44:10 Set A/D channel type result=40
04:44:10 Set A/D encoding result=40
04:44:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:44:10 Set channel filter=0.000000e+000  result=40
04:44:10 Config A/D  Result=40
04:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:44:10 Get A/D filter: -9.255963e+061  result=40
04:44:10 Get A/D value=-858993460  result=40
04:44:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:44:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:44:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:44:10 Aux=
04:44:10 Message to Camera, serial 344563 queued
04:44:47 Received message from Master: op=PointingHead serial=344576
04:44:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:44:47 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:44:48 Point started: ret=0
04:44:48 point_skyscan result=0
04:44:48 Check angles
04:44:48 SkyScan query
04:44:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
04:44:49 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
04:44:49 Check angles
04:44:49 SkyScan query
04:44:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.295<-14953  Statuses=0008 0009
04:44:50 Msec=750  True Az=112.995  Ze=-44.295  Az status=0008  Ze status=0009
04:44:50 Check angles
04:44:50 SkyScan query
04:44:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.25<-16350  Statuses=0008 0009
04:44:51 Msec=1500  True Az=112.995  Ze=-65.25  Az status=0008  Ze status=0009
04:44:51 Check angles
04:44:51 SkyScan query
04:44:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
04:44:51 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
04:44:51 Check angles
04:44:51 SkyScan query
04:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.015<-19201  Statuses=0008 0009
04:44:52 Msec=3000  True Az=112.995  Ze=-108.015  Az status=0008  Ze status=0009
04:44:52 Check angles
04:44:52 SkyScan query
04:44:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.97<-20598  Statuses=0008 0009
04:44:53 Msec=3750  True Az=112.995  Ze=-128.97  Az status=0008  Ze status=0009
04:44:53 Check angles
04:44:53 SkyScan query
04:44:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.36<-22024  Statuses=0008 0009
04:44:54 Msec=4500  True Az=112.995  Ze=-150.36  Az status=0008  Ze status=0009
04:44:54 Check angles
04:44:54 SkyScan query
04:44:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.465<-23431  Statuses=0008 0009
04:44:54 Msec=5250  True Az=112.995  Ze=-171.465  Az status=0008  Ze status=0009
04:44:55 Check angles
04:44:55 SkyScan query
04:44:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:44:55 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:44:55 Message to Master queued w/err=0: serial=344576 error=0
04:45:00 Received message from Master: op=Filter serial=344577
04:45:00 Color wheel filter change from 0 to 0
04:45:00 FLIGetFilterPos err=0  currentPosition=0
04:45:00 FLIGetStepsRemaining err=0  RemainingSteps=0
04:45:00 Filter is already there-color wheel unchanged
04:45:00 Received message from Master: op=Shutter serial=344578
04:45:00 Shutter LASER open
04:45:00 Received message from Camera: op=State serial=344580
04:45:00 GetSingleValue result=40  Value=cccccccc
04:45:00 SkyScan query
04:45:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:45:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:45:01 Parameters OK
04:45:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:45:01 Set A/D data flow result=40
04:45:01 Set A/D channel type result=40
04:45:01 Set A/D encoding result=40
04:45:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:45:01 Set channel filter=0.000000e+000  result=40
04:45:01 Config A/D  Result=40
04:45:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:45:01 Get A/D filter: -9.255963e+061  result=40
04:45:01 Get A/D value=-858993460  result=40
04:45:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:45:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:45:01 Parameters OK
04:45:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:45:01 Set A/D data flow result=40
04:45:01 Set A/D channel type result=40
04:45:01 Set A/D encoding result=40
04:45:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:45:01 Set channel filter=0.000000e+000  result=40
04:45:01 Config A/D  Result=40
04:45:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:45:01 Get A/D filter: -9.255963e+061  result=40
04:45:01 Get A/D value=-858993460  result=40
04:45:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:45:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:45:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:45:01 Aux=
04:45:01 Message to Camera, serial 344580 queued
04:45:09 Received message from Master: op=Shutter serial=344590
04:45:09 Shutter LASER close
04:45:10 Received message from Master: op=PointingHead serial=344594
04:45:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:45:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:45:10 Point started: ret=0
04:45:10 point_skyscan result=0
04:45:11 Check angles
04:45:11 SkyScan query
04:45:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.83<-21522  Statuses=0008 0009
04:45:12 Msec=0  True Az=112.995  Ze=-142.83  Az status=0008  Ze status=0009
04:45:12 Check angles
04:45:12 SkyScan query
04:45:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
04:45:12 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
04:45:13 Check angles
04:45:13 SkyScan query
04:45:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.92<-18728  Statuses=0008 0009
04:45:13 Msec=1500  True Az=112.995  Ze=-100.92  Az status=0008  Ze status=0009
04:45:13 Check angles
04:45:13 SkyScan query
04:45:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.98<-17332  Statuses=0008 0009
04:45:14 Msec=2250  True Az=112.995  Ze=-79.98  Az status=0008  Ze status=0009
04:45:14 Check angles
04:45:14 SkyScan query
04:45:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.025<-15935  Statuses=0008 0009
04:45:15 Msec=3000  True Az=112.995  Ze=-59.025  Az status=0008  Ze status=0009
04:45:15 Check angles
04:45:15 SkyScan query
04:45:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.025<-14535  Statuses=0008 0009
04:45:15 Msec=3750  True Az=112.995  Ze=-38.025  Az status=0008  Ze status=0009
04:45:16 Check angles
04:45:16 SkyScan query
04:45:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.085<-13139  Statuses=0008 0009
04:45:16 Msec=4500  True Az=112.995  Ze=-17.085  Az status=0008  Ze status=0009
04:45:16 Check angles
04:45:16 SkyScan query
04:45:17 SkyScan query done: ret=0  az=112.995<-7533  ze=4.26<-11716  Statuses=0008 0009
04:45:17 Msec=5250  True Az=112.995  Ze=4.26  Az status=0008  Ze status=0009
04:45:17 Check angles
04:45:17 SkyScan query
04:45:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:45:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:45:18 Message to Master queued w/err=0: serial=344594 error=0
04:45:23 Received message from Master: op=Filter serial=344595
04:45:23 Color wheel filter change from 0 to 0
04:45:23 FLIGetFilterPos err=0  currentPosition=0
04:45:23 FLIGetStepsRemaining err=0  RemainingSteps=0
04:45:23 Filter is already there-color wheel unchanged
04:45:23 Received message from Master: op=Shutter serial=344596
04:45:23 Shutter LASER close
04:45:23 Received message from Camera: op=State serial=344598
04:45:23 GetSingleValue result=40  Value=cccccccc
04:45:23 SkyScan query
04:45:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:45:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:45:24 Parameters OK
04:45:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:45:24 Set A/D data flow result=40
04:45:24 Set A/D channel type result=40
04:45:24 Set A/D encoding result=40
04:45:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:45:24 Set channel filter=0.000000e+000  result=40
04:45:24 Config A/D  Result=40
04:45:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:45:24 Get A/D filter: -9.255963e+061  result=40
04:45:24 Get A/D value=-858993460  result=40
04:45:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:45:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:45:24 Parameters OK
04:45:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:45:24 Set A/D data flow result=40
04:45:24 Set A/D channel type result=40
04:45:24 Set A/D encoding result=40
04:45:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:45:24 Set channel filter=0.000000e+000  result=40
04:45:24 Config A/D  Result=40
04:45:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:45:24 Get A/D filter: -9.255963e+061  result=40
04:45:24 Get A/D value=-858993460  result=40
04:45:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:45:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:45:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:45:24 Aux=
04:45:24 Message to Camera, serial 344598 queued
04:46:00 Received message from Master: op=PointingHead serial=344611
04:46:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:46:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:46:01 Point started: ret=0
04:46:01 point_skyscan result=0
04:46:02 Check angles
04:46:02 SkyScan query
04:46:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:46:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:46:02 Message to Master queued w/err=0: serial=344611 error=0
04:46:07 Received message from Master: op=Filter serial=344612
04:46:07 Color wheel filter change from 0 to 0
04:46:07 FLIGetFilterPos err=0  currentPosition=0
04:46:07 FLIGetStepsRemaining err=0  RemainingSteps=0
04:46:07 Filter is already there-color wheel unchanged
04:46:07 Received message from Master: op=Shutter serial=344613
04:46:07 Shutter LASER close
04:46:07 Received message from Camera: op=State serial=344615
04:46:07 GetSingleValue result=40  Value=cccccccc
04:46:07 SkyScan query
04:46:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:46:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:46:08 Parameters OK
04:46:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:46:08 Set A/D data flow result=40
04:46:08 Set A/D channel type result=40
04:46:08 Set A/D encoding result=40
04:46:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:46:08 Set channel filter=0.000000e+000  result=40
04:46:08 Config A/D  Result=40
04:46:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:46:08 Get A/D filter: -9.255963e+061  result=40
04:46:08 Get A/D value=-858993460  result=40
04:46:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:46:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:46:08 Parameters OK
04:46:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:46:08 Set A/D data flow result=40
04:46:08 Set A/D channel type result=40
04:46:08 Set A/D encoding result=40
04:46:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:46:08 Set channel filter=0.000000e+000  result=40
04:46:08 Config A/D  Result=40
04:46:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:46:08 Get A/D filter: -9.255963e+061  result=40
04:46:08 Get A/D value=-858993460  result=40
04:46:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:46:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:46:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:46:08 Aux=
04:46:08 Message to Camera, serial 344615 queued
04:46:45 Received message from Master: op=PointingHead serial=344628
04:46:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:46:45 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:46:45 Point started: ret=0
04:46:45 point_skyscan result=0
04:46:46 Check angles
04:46:46 SkyScan query
04:46:46 SkyScan query done: ret=0  az=136.17<-9078  ze=-6.51<-12434  Statuses=0009 0008
04:46:46 Msec=0  True Az=136.17  Ze=-6.51  Az status=0009  Ze status=0008
04:46:47 Check angles
04:46:47 SkyScan query
04:46:47 SkyScan query done: ret=0  az=153.6<-10240  ze=-6.495<-12433  Statuses=0009 0008
04:46:47 Msec=750  True Az=153.6  Ze=-6.495  Az status=0009  Ze status=0008
04:46:47 Check angles
04:46:47 SkyScan query
04:46:48 SkyScan query done: ret=0  az=171.06<-11404  ze=-6.495<-12433  Statuses=0009 0008
04:46:48 Msec=1500  True Az=171.06  Ze=-6.495  Az status=0009  Ze status=0008
04:46:48 Check angles
04:46:48 SkyScan query
04:46:49 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:46:49 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
04:46:49 Message to Master queued w/err=0: serial=344628 error=0
04:46:54 Received message from Master: op=Filter serial=344629
04:46:54 Color wheel filter change from 0 to 0
04:46:54 FLIGetFilterPos err=0  currentPosition=0
04:46:54 FLIGetStepsRemaining err=0  RemainingSteps=0
04:46:54 Filter is already there-color wheel unchanged
04:46:54 Received message from Master: op=Shutter serial=344630
04:46:54 Shutter LASER close
04:46:54 Received message from Camera: op=State serial=344632
04:46:54 GetSingleValue result=40  Value=cccccccc
04:46:54 SkyScan query
04:46:54 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
04:46:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:46:54 Parameters OK
04:46:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:46:54 Set A/D data flow result=40
04:46:54 Set A/D channel type result=40
04:46:54 Set A/D encoding result=40
04:46:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:46:54 Set channel filter=0.000000e+000  result=40
04:46:54 Config A/D  Result=40
04:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:46:54 Get A/D filter: -9.255963e+061  result=40
04:46:54 Get A/D value=-858993460  result=40
04:46:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:46:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:46:54 Parameters OK
04:46:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:46:54 Set A/D data flow result=40
04:46:54 Set A/D channel type result=40
04:46:54 Set A/D encoding result=40
04:46:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:46:54 Set channel filter=0.000000e+000  result=40
04:46:54 Config A/D  Result=40
04:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:46:54 Get A/D filter: -9.255963e+061  result=40
04:46:54 Get A/D value=-858993460  result=40
04:46:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:46:54 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:46:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:46:54 Aux=
04:46:54 Message to Camera, serial 344632 queued
04:47:30 Received message from Master: op=PointingHead serial=344644
04:47:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:47:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:47:31 Point started: ret=0
04:47:31 point_skyscan result=0
04:47:32 Check angles
04:47:32 SkyScan query
04:47:32 SkyScan query done: ret=0  az=153.105<-10207  ze=6.51<-11566  Statuses=0009 0008
04:47:32 Msec=0  True Az=153.105  Ze=6.51  Az status=0009  Ze status=0008
04:47:32 Check angles
04:47:32 SkyScan query
04:47:33 SkyScan query done: ret=0  az=135.675<-9045  ze=6.495<-11567  Statuses=0009 0008
04:47:33 Msec=750  True Az=135.675  Ze=6.495  Az status=0009  Ze status=0008
04:47:33 Check angles
04:47:33 SkyScan query
04:47:34 SkyScan query done: ret=0  az=118.215<-7881  ze=6.495<-11567  Statuses=0009 0008
04:47:34 Msec=1500  True Az=118.215  Ze=6.495  Az status=0009  Ze status=0008
04:47:34 Check angles
04:47:34 SkyScan query
04:47:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:47:34 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:47:34 Message to Master queued w/err=0: serial=344644 error=0
04:47:39 Received message from Master: op=Filter serial=344645
04:47:39 Color wheel filter change from 0 to 0
04:47:39 FLIGetFilterPos err=0  currentPosition=0
04:47:39 FLIGetStepsRemaining err=0  RemainingSteps=0
04:47:39 Filter is already there-color wheel unchanged
04:47:40 Received message from Master: op=Shutter serial=344646
04:47:40 Shutter LASER close
04:47:40 Received message from Camera: op=State serial=344648
04:47:40 GetSingleValue result=40  Value=cccccccc
04:47:40 SkyScan query
04:47:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:47:40 Parameters OK
04:47:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:47:40 Set A/D data flow result=40
04:47:40 Set A/D channel type result=40
04:47:40 Set A/D encoding result=40
04:47:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:47:40 Set channel filter=0.000000e+000  result=40
04:47:40 Config A/D  Result=40
04:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:47:40 Get A/D filter: -9.255963e+061  result=40
04:47:40 Get A/D value=-858993460  result=40
04:47:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:47:40 Parameters OK
04:47:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:47:40 Set A/D data flow result=40
04:47:40 Set A/D channel type result=40
04:47:40 Set A/D encoding result=40
04:47:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:47:40 Set channel filter=0.000000e+000  result=40
04:47:40 Config A/D  Result=40
04:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:47:40 Get A/D filter: -9.255963e+061  result=40
04:47:40 Get A/D value=-858993460  result=40
04:47:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:47:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:47:40 Aux=
04:47:40 Message to Camera, serial 344648 queued
04:48:17 Received message from Master: op=PointingHead serial=344661
04:48:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:48:17 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:48:17 Point started: ret=0
04:48:17 point_skyscan result=0
04:48:18 Check angles
04:48:18 SkyScan query
04:48:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
04:48:19 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
04:48:19 Check angles
04:48:19 SkyScan query
04:48:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
04:48:19 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
04:48:20 Check angles
04:48:20 SkyScan query
04:48:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.265<-16351  Statuses=0008 0009
04:48:20 Msec=1500  True Az=112.995  Ze=-65.265  Az status=0008  Ze status=0009
04:48:20 Check angles
04:48:20 SkyScan query
04:48:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.22<-17748  Statuses=0008 0009
04:48:21 Msec=2250  True Az=112.995  Ze=-86.22  Az status=0008  Ze status=0009
04:48:21 Check angles
04:48:21 SkyScan query
04:48:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.16<-19144  Statuses=0008 0009
04:48:22 Msec=3000  True Az=112.995  Ze=-107.16  Az status=0008  Ze status=0009
04:48:22 Check angles
04:48:22 SkyScan query
04:48:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.13<-20542  Statuses=0008 0009
04:48:22 Msec=3750  True Az=112.995  Ze=-128.13  Az status=0008  Ze status=0009
04:48:23 Check angles
04:48:23 SkyScan query
04:48:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.085<-21939  Statuses=0008 0009
04:48:23 Msec=4500  True Az=112.995  Ze=-149.085  Az status=0008  Ze status=0009
04:48:23 Check angles
04:48:23 SkyScan query
04:48:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.025<-23335  Statuses=0008 0009
04:48:24 Msec=5250  True Az=112.995  Ze=-170.025  Az status=0008  Ze status=0009
04:48:24 Check angles
04:48:24 SkyScan query
04:48:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:48:25 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:48:25 Message to Master queued w/err=0: serial=344661 error=0
04:48:30 Received message from Master: op=Filter serial=344662
04:48:30 Color wheel filter change from 0 to 0
04:48:30 FLIGetFilterPos err=0  currentPosition=0
04:48:30 FLIGetStepsRemaining err=0  RemainingSteps=0
04:48:30 Filter is already there-color wheel unchanged
04:48:30 Received message from Master: op=Shutter serial=344663
04:48:30 Shutter LASER open
04:48:30 Received message from Camera: op=State serial=344665
04:48:30 GetSingleValue result=40  Value=cccccccc
04:48:30 SkyScan query
04:48:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:48:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:31 Parameters OK
04:48:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:31 Set A/D data flow result=40
04:48:31 Set A/D channel type result=40
04:48:31 Set A/D encoding result=40
04:48:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:31 Set channel filter=0.000000e+000  result=40
04:48:31 Config A/D  Result=40
04:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:31 Get A/D filter: -9.255963e+061  result=40
04:48:31 Get A/D value=-858993460  result=40
04:48:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:31 Parameters OK
04:48:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:31 Set A/D data flow result=40
04:48:31 Set A/D channel type result=40
04:48:31 Set A/D encoding result=40
04:48:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:31 Set channel filter=0.000000e+000  result=40
04:48:31 Config A/D  Result=40
04:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:31 Get A/D filter: -9.255963e+061  result=40
04:48:31 Get A/D value=-858993460  result=40
04:48:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:48:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:48:31 Aux=
04:48:31 Message to Camera, serial 344665 queued
04:48:39 Received message from Master: op=Shutter serial=344675
04:48:39 Shutter LASER close
04:48:39 Received message from Master: op=PointingHead serial=344679
04:48:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:48:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:48:40 Point started: ret=0
04:48:40 point_skyscan result=0
04:48:41 Check angles
04:48:41 SkyScan query
04:48:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
04:48:41 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
04:48:41 Check angles
04:48:41 SkyScan query
04:48:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.355<-20157  Statuses=0008 0009
04:48:42 Msec=750  True Az=112.995  Ze=-122.355  Az status=0008  Ze status=0009
04:48:42 Check angles
04:48:42 SkyScan query
04:48:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.98<-18732  Statuses=0008 0009
04:48:43 Msec=1500  True Az=112.995  Ze=-100.98  Az status=0008  Ze status=0009
04:48:43 Check angles
04:48:43 SkyScan query
04:48:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.025<-17335  Statuses=0008 0009
04:48:43 Msec=2250  True Az=112.995  Ze=-80.025  Az status=0008  Ze status=0009
04:48:44 Check angles
04:48:44 SkyScan query
04:48:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.085<-15939  Statuses=0008 0009
04:48:44 Msec=3000  True Az=112.995  Ze=-59.085  Az status=0008  Ze status=0009
04:48:44 Check angles
04:48:44 SkyScan query
04:48:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.085<-14539  Statuses=0008 0009
04:48:45 Msec=3750  True Az=112.995  Ze=-38.085  Az status=0008  Ze status=0009
04:48:45 Check angles
04:48:45 SkyScan query
04:48:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.695<-13113  Statuses=0008 0009
04:48:46 Msec=4500  True Az=112.995  Ze=-16.695  Az status=0008  Ze status=0009
04:48:46 Check angles
04:48:46 SkyScan query
04:48:46 SkyScan query done: ret=0  az=112.995<-7533  ze=4.215<-11719  Statuses=0008 0009
04:48:46 Msec=5250  True Az=112.995  Ze=4.215  Az status=0008  Ze status=0009
04:48:47 Check angles
04:48:47 SkyScan query
04:48:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:48:47 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:48:47 Message to Master queued w/err=0: serial=344679 error=0
04:48:52 Received message from Master: op=Filter serial=344680
04:48:52 Color wheel filter change from 0 to 0
04:48:52 FLIGetFilterPos err=0  currentPosition=0
04:48:52 FLIGetStepsRemaining err=0  RemainingSteps=0
04:48:52 Filter is already there-color wheel unchanged
04:48:52 Received message from Master: op=Shutter serial=344681
04:48:52 Shutter LASER close
04:48:52 Received message from Camera: op=State serial=344683
04:48:52 GetSingleValue result=40  Value=cccccccc
04:48:52 SkyScan query
04:48:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:48:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:53 Parameters OK
04:48:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:53 Set A/D data flow result=40
04:48:53 Set A/D channel type result=40
04:48:53 Set A/D encoding result=40
04:48:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:53 Set channel filter=0.000000e+000  result=40
04:48:53 Config A/D  Result=40
04:48:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:53 Get A/D filter: -9.255963e+061  result=40
04:48:53 Get A/D value=-858993460  result=40
04:48:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:53 Parameters OK
04:48:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:53 Set A/D data flow result=40
04:48:53 Set A/D channel type result=40
04:48:53 Set A/D encoding result=40
04:48:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:53 Set channel filter=0.000000e+000  result=40
04:48:53 Config A/D  Result=40
04:48:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:53 Get A/D filter: -9.255963e+061  result=40
04:48:53 Get A/D value=-858993460  result=40
04:48:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:48:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:48:53 Aux=
04:48:53 Message to Camera, serial 344683 queued
04:49:30 Received message from Master: op=PointingHead serial=344696
04:49:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:49:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:49:30 Point started: ret=0
04:49:30 point_skyscan result=0
04:49:31 Check angles
04:49:31 SkyScan query
04:49:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:49:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:49:32 Message to Master queued w/err=0: serial=344696 error=0
04:49:37 Received message from Master: op=Filter serial=344697
04:49:37 Color wheel filter change from 0 to 0
04:49:37 FLIGetFilterPos err=0  currentPosition=0
04:49:37 FLIGetStepsRemaining err=0  RemainingSteps=0
04:49:37 Filter is already there-color wheel unchanged
04:49:37 Received message from Master: op=Shutter serial=344698
04:49:37 Shutter LASER close
04:49:37 Received message from Camera: op=State serial=344700
04:49:37 GetSingleValue result=40  Value=cccccccc
04:49:37 SkyScan query
04:49:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:49:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:49:37 Parameters OK
04:49:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:49:37 Set A/D data flow result=40
04:49:37 Set A/D channel type result=40
04:49:37 Set A/D encoding result=40
04:49:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:49:37 Set channel filter=0.000000e+000  result=40
04:49:37 Config A/D  Result=40
04:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:49:37 Get A/D filter: -9.255963e+061  result=40
04:49:37 Get A/D value=-858993460  result=40
04:49:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:49:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:49:37 Parameters OK
04:49:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:49:37 Set A/D data flow result=40
04:49:37 Set A/D channel type result=40
04:49:37 Set A/D encoding result=40
04:49:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:49:37 Set channel filter=0.000000e+000  result=40
04:49:37 Config A/D  Result=40
04:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:49:37 Get A/D filter: -9.255963e+061  result=40
04:49:37 Get A/D value=-858993460  result=40
04:49:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:49:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:49:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:49:37 Aux=
04:49:37 Message to Camera, serial 344700 queued
04:50:14 Received message from Master: op=PointingHead serial=344713
04:50:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:50:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:50:15 Point started: ret=0
04:50:15 point_skyscan result=0
04:50:15 Check angles
04:50:15 SkyScan query
04:50:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:50:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:50:16 Message to Master queued w/err=0: serial=344713 error=0
04:50:21 Received message from Master: op=Filter serial=344714
04:50:21 Color wheel filter change from 0 to 0
04:50:21 FLIGetFilterPos err=0  currentPosition=0
04:50:21 FLIGetStepsRemaining err=0  RemainingSteps=0
04:50:21 Filter is already there-color wheel unchanged
04:50:21 Received message from Master: op=Shutter serial=344715
04:50:21 Shutter LASER close
04:50:21 Received message from Camera: op=State serial=344717
04:50:21 GetSingleValue result=40  Value=cccccccc
04:50:21 SkyScan query
04:50:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:50:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:50:22 Parameters OK
04:50:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:50:22 Set A/D data flow result=40
04:50:22 Set A/D channel type result=40
04:50:22 Set A/D encoding result=40
04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:50:22 Set channel filter=0.000000e+000  result=40
04:50:22 Config A/D  Result=40
04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:50:22 Get A/D filter: -9.255963e+061  result=40
04:50:22 Get A/D value=-858993460  result=40
04:50:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:50:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:50:22 Parameters OK
04:50:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:50:22 Set A/D data flow result=40
04:50:22 Set A/D channel type result=40
04:50:22 Set A/D encoding result=40
04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:50:22 Set channel filter=0.000000e+000  result=40
04:50:22 Config A/D  Result=40
04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:50:22 Get A/D filter: -9.255963e+061  result=40
04:50:22 Get A/D value=-858993460  result=40
04:50:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:50:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:50:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:50:22 Aux=
04:50:22 Message to Camera, serial 344717 queued
04:50:58 Received message from Master: op=PointingHead serial=344730
04:50:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:50:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:50:59 Point started: ret=0
04:50:59 point_skyscan result=0
04:51:00 Check angles
04:51:00 SkyScan query
04:51:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:51:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:51:00 Message to Master queued w/err=0: serial=344730 error=0
04:51:05 Received message from Master: op=Filter serial=344731
04:51:05 Color wheel filter change from 0 to 0
04:51:05 FLIGetFilterPos err=0  currentPosition=0
04:51:05 FLIGetStepsRemaining err=0  RemainingSteps=0
04:51:05 Filter is already there-color wheel unchanged
04:51:05 Received message from Master: op=Shutter serial=344732
04:51:05 Shutter LASER close
04:51:05 Received message from Camera: op=State serial=344734
04:51:05 GetSingleValue result=40  Value=cccccccc
04:51:05 SkyScan query
04:51:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:51:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:06 Parameters OK
04:51:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:06 Set A/D data flow result=40
04:51:06 Set A/D channel type result=40
04:51:06 Set A/D encoding result=40
04:51:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:06 Set channel filter=0.000000e+000  result=40
04:51:06 Config A/D  Result=40
04:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:06 Get A/D filter: -9.255963e+061  result=40
04:51:06 Get A/D value=-858993460  result=40
04:51:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:06 Parameters OK
04:51:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:06 Set A/D data flow result=40
04:51:06 Set A/D channel type result=40
04:51:06 Set A/D encoding result=40
04:51:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:06 Set channel filter=0.000000e+000  result=40
04:51:06 Config A/D  Result=40
04:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:06 Get A/D filter: -9.255963e+061  result=40
04:51:06 Get A/D value=-858993460  result=40
04:51:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:51:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:51:06 Aux=
04:51:06 Message to Camera, serial 344734 queued
04:51:43 Received message from Master: op=PointingHead serial=344747
04:51:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:51:43 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:51:43 Point started: ret=0
04:51:43 point_skyscan result=0
04:51:44 Check angles
04:51:44 SkyScan query
04:51:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.85<-13590  Statuses=0008 0009
04:51:44 Msec=0  True Az=112.995  Ze=-23.85  Az status=0008  Ze status=0009
04:51:45 Check angles
04:51:45 SkyScan query
04:51:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.805<-14987  Statuses=0008 0009
04:51:45 Msec=750  True Az=112.995  Ze=-44.805  Az status=0008  Ze status=0009
04:51:45 Check angles
04:51:45 SkyScan query
04:51:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.745<-16383  Statuses=0008 0009
04:51:46 Msec=1500  True Az=112.995  Ze=-65.745  Az status=0008  Ze status=0009
04:51:46 Check angles
04:51:46 SkyScan query
04:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.135<-17809  Statuses=0008 0009
04:51:47 Msec=2250  True Az=112.995  Ze=-87.135  Az status=0008  Ze status=0009
04:51:47 Check angles
04:51:47 SkyScan query
04:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.09<-19206  Statuses=0008 0009
04:51:47 Msec=3000  True Az=112.995  Ze=-108.09  Az status=0008  Ze status=0009
04:51:48 Check angles
04:51:48 SkyScan query
04:51:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.48<-20632  Statuses=0008 0009
04:51:48 Msec=3750  True Az=112.995  Ze=-129.48  Az status=0008  Ze status=0009
04:51:48 Check angles
04:51:48 SkyScan query
04:51:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.435<-22029  Statuses=0008 0009
04:51:49 Msec=4500  True Az=112.995  Ze=-150.435  Az status=0008  Ze status=0009
04:51:49 Check angles
04:51:49 SkyScan query
04:51:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.195<-23413  Statuses=0008 0009
04:51:50 Msec=5250  True Az=112.995  Ze=-171.195  Az status=0008  Ze status=0009
04:51:50 Check angles
04:51:50 SkyScan query
04:51:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:51:50 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:51:50 Message to Master queued w/err=0: serial=344747 error=0
04:51:55 Received message from Master: op=Filter serial=344748
04:51:55 Color wheel filter change from 0 to 0
04:51:55 FLIGetFilterPos err=0  currentPosition=0
04:51:55 FLIGetStepsRemaining err=0  RemainingSteps=0
04:51:55 Filter is already there-color wheel unchanged
04:51:56 Received message from Master: op=Shutter serial=344749
04:51:56 Shutter LASER open
04:51:56 Received message from Camera: op=State serial=344751
04:51:56 GetSingleValue result=40  Value=cccccccc
04:51:56 SkyScan query
04:51:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:56 Parameters OK
04:51:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:56 Set A/D data flow result=40
04:51:56 Set A/D channel type result=40
04:51:56 Set A/D encoding result=40
04:51:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:56 Set channel filter=0.000000e+000  result=40
04:51:56 Config A/D  Result=40
04:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:56 Get A/D filter: -9.255963e+061  result=40
04:51:56 Get A/D value=-858993460  result=40
04:51:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:56 Parameters OK
04:51:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:56 Set A/D data flow result=40
04:51:56 Set A/D channel type result=40
04:51:56 Set A/D encoding result=40
04:51:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:56 Set channel filter=0.000000e+000  result=40
04:51:56 Config A/D  Result=40
04:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:56 Get A/D filter: -9.255963e+061  result=40
04:51:56 Get A/D value=-858993460  result=40
04:51:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:51:56 Aux=
04:51:56 Message to Camera, serial 344751 queued
04:52:04 Received message from Master: op=Shutter serial=344760
04:52:04 Shutter LASER close
04:52:05 Received message from Master: op=PointingHead serial=344764
04:52:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:52:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:52:05 Point started: ret=0
04:52:05 point_skyscan result=0
04:52:06 Check angles
04:52:06 SkyScan query
04:52:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
04:52:06 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
04:52:06 Check angles
04:52:06 SkyScan query
04:52:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
04:52:07 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
04:52:07 Check angles
04:52:07 SkyScan query
04:52:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.145<-18743  Statuses=0008 0009
04:52:08 Msec=1500  True Az=112.995  Ze=-101.145  Az status=0008  Ze status=0009
04:52:08 Check angles
04:52:08 SkyScan query
04:52:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.175<-17345  Statuses=0008 0009
04:52:08 Msec=2250  True Az=112.995  Ze=-80.175  Az status=0008  Ze status=0009
04:52:09 Check angles
04:52:09 SkyScan query
04:52:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.235<-15949  Statuses=0008 0009
04:52:09 Msec=3000  True Az=112.995  Ze=-59.235  Az status=0008  Ze status=0009
04:52:09 Check angles
04:52:09 SkyScan query
04:52:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.25<-14550  Statuses=0008 0009
04:52:10 Msec=3750  True Az=112.995  Ze=-38.25  Az status=0008  Ze status=0009
04:52:10 Check angles
04:52:10 SkyScan query
04:52:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
04:52:11 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
04:52:11 Check angles
04:52:11 SkyScan query
04:52:11 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
04:52:11 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
04:52:12 Check angles
04:52:12 SkyScan query
04:52:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:52:12 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:52:12 Message to Master queued w/err=0: serial=344764 error=0
04:52:17 Received message from Master: op=Filter serial=344765
04:52:17 Color wheel filter change from 0 to 0
04:52:17 FLIGetFilterPos err=0  currentPosition=0
04:52:17 FLIGetStepsRemaining err=0  RemainingSteps=0
04:52:17 Filter is already there-color wheel unchanged
04:52:17 Received message from Master: op=Shutter serial=344766
04:52:17 Shutter LASER close
04:52:18 Received message from Camera: op=State serial=344768
04:52:18 GetSingleValue result=40  Value=cccccccc
04:52:18 SkyScan query
04:52:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:52:18 Parameters OK
04:52:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:52:18 Set A/D data flow result=40
04:52:18 Set A/D channel type result=40
04:52:18 Set A/D encoding result=40
04:52:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:52:18 Set channel filter=0.000000e+000  result=40
04:52:18 Config A/D  Result=40
04:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:52:18 Get A/D filter: -9.255963e+061  result=40
04:52:18 Get A/D value=-858993460  result=40
04:52:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:52:18 Parameters OK
04:52:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:52:18 Set A/D data flow result=40
04:52:18 Set A/D channel type result=40
04:52:18 Set A/D encoding result=40
04:52:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:52:18 Set channel filter=0.000000e+000  result=40
04:52:18 Config A/D  Result=40
04:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:52:18 Get A/D filter: -9.255963e+061  result=40
04:52:18 Get A/D value=-858993460  result=40
04:52:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:52:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:52:18 Aux=
04:52:18 Message to Camera, serial 344768 queued
04:52:55 Received message from Master: op=PointingHead serial=344781
04:52:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:52:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:52:55 Point started: ret=0
04:52:55 point_skyscan result=0
04:52:56 Check angles
04:52:56 SkyScan query
04:52:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:52:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:52:57 Message to Master queued w/err=0: serial=344781 error=0
04:53:02 Received message from Master: op=Filter serial=344782
04:53:02 Color wheel filter change from 0 to 0
04:53:02 FLIGetFilterPos err=0  currentPosition=0
04:53:02 FLIGetStepsRemaining err=0  RemainingSteps=0
04:53:02 Filter is already there-color wheel unchanged
04:53:02 Received message from Master: op=Shutter serial=344783
04:53:02 Shutter LASER close
04:53:02 Received message from Camera: op=State serial=344785
04:53:02 GetSingleValue result=40  Value=cccccccc
04:53:02 SkyScan query
04:53:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:53:02 Parameters OK
04:53:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:53:02 Set A/D data flow result=40
04:53:02 Set A/D channel type result=40
04:53:02 Set A/D encoding result=40
04:53:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:53:02 Set channel filter=0.000000e+000  result=40
04:53:02 Config A/D  Result=40
04:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:53:02 Get A/D filter: -9.255963e+061  result=40
04:53:02 Get A/D value=-858993460  result=40
04:53:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:53:02 Parameters OK
04:53:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:53:02 Set A/D data flow result=40
04:53:02 Set A/D channel type result=40
04:53:02 Set A/D encoding result=40
04:53:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:53:02 Set channel filter=0.000000e+000  result=40
04:53:02 Config A/D  Result=40
04:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:53:02 Get A/D filter: -9.255963e+061  result=40
04:53:02 Get A/D value=-858993460  result=40
04:53:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:53:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:53:02 Aux=
04:53:02 Message to Camera, serial 344785 queued
04:53:39 Received message from Master: op=PointingHead serial=344798
04:53:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:53:39 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:53:40 Point started: ret=0
04:53:40 point_skyscan result=0
04:53:40 Check angles
04:53:40 SkyScan query
04:53:41 SkyScan query done: ret=0  az=135.825<-9055  ze=-6.495<-12433  Statuses=0009 0008
04:53:41 Msec=0  True Az=135.825  Ze=-6.495  Az status=0009  Ze status=0008
04:53:41 Check angles
04:53:41 SkyScan query
04:53:42 SkyScan query done: ret=0  az=153.27<-10218  ze=-6.48<-12432  Statuses=0009 0008
04:53:42 Msec=750  True Az=153.27  Ze=-6.48  Az status=0009  Ze status=0008
04:53:42 Check angles
04:53:42 SkyScan query
04:53:42 SkyScan query done: ret=0  az=170.79<-11386  ze=-6.48<-12432  Statuses=0009 0008
04:53:42 Msec=1500  True Az=170.79  Ze=-6.48  Az status=0009  Ze status=0008
04:53:43 Check angles
04:53:43 SkyScan query
04:53:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:53:43 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:53:43 Message to Master queued w/err=0: serial=344798 error=0
04:53:48 Received message from Master: op=Filter serial=344799
04:53:48 Color wheel filter change from 0 to 0
04:53:48 FLIGetFilterPos err=0  currentPosition=0
04:53:48 FLIGetStepsRemaining err=0  RemainingSteps=0
04:53:48 Filter is already there-color wheel unchanged
04:53:48 Received message from Master: op=Shutter serial=344800
04:53:48 Shutter LASER close
04:53:48 Received message from Camera: op=State serial=344802
04:53:48 GetSingleValue result=40  Value=cccccccc
04:53:48 SkyScan query
04:53:49 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:53:49 Parameters OK
04:53:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:53:49 Set A/D data flow result=40
04:53:49 Set A/D channel type result=40
04:53:49 Set A/D encoding result=40
04:53:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:53:49 Set channel filter=0.000000e+000  result=40
04:53:49 Config A/D  Result=40
04:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:53:49 Get A/D filter: -9.255963e+061  result=40
04:53:49 Get A/D value=-858993460  result=40
04:53:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:53:49 Parameters OK
04:53:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:53:49 Set A/D data flow result=40
04:53:49 Set A/D channel type result=40
04:53:49 Set A/D encoding result=40
04:53:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:53:49 Set channel filter=0.000000e+000  result=40
04:53:49 Config A/D  Result=40
04:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:53:49 Get A/D filter: -9.255963e+061  result=40
04:53:49 Get A/D value=-858993460  result=40
04:53:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:53:49 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:53:49 Aux=
04:53:49 Message to Camera, serial 344802 queued
[UTC 2019-3-19  04:54:26]
04:54:26 Received message from Master: op=PointingHead serial=344815
04:54:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:54:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:54:26 Point started: ret=0
04:54:26 point_skyscan result=0
04:54:27 Check angles
04:54:27 SkyScan query
04:54:28 SkyScan query done: ret=0  az=152.565<-10171  ze=6.51<-11566  Statuses=0009 0008
04:54:28 Msec=0  True Az=152.565  Ze=6.51  Az status=0009  Ze status=0008
04:54:28 Check angles
04:54:28 SkyScan query
04:54:28 SkyScan query done: ret=0  az=135.135<-9009  ze=6.495<-11567  Statuses=0009 0008
04:54:28 Msec=750  True Az=135.135  Ze=6.495  Az status=0009  Ze status=0008
04:54:28 Check angles
04:54:28 SkyScan query
04:54:29 SkyScan query done: ret=0  az=117.705<-7847  ze=6.495<-11567  Statuses=0009 0008
04:54:29 Msec=1500  True Az=117.705  Ze=6.495  Az status=0009  Ze status=0008
04:54:29 Check angles
04:54:29 SkyScan query
04:54:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:54:30 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:54:30 Message to Master queued w/err=0: serial=344815 error=0
04:54:35 Received message from Master: op=Filter serial=344816
04:54:35 Color wheel filter change from 0 to 0
04:54:35 FLIGetFilterPos err=0  currentPosition=0
04:54:35 FLIGetStepsRemaining err=0  RemainingSteps=0
04:54:35 Filter is already there-color wheel unchanged
04:54:35 Received message from Master: op=Shutter serial=344817
04:54:35 Shutter LASER close
04:54:35 Received message from Camera: op=State serial=344819
04:54:35 GetSingleValue result=40  Value=cccccccc
04:54:35 SkyScan query
04:54:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:54:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:54:36 Parameters OK
04:54:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:54:36 Set A/D data flow result=40
04:54:36 Set A/D channel type result=40
04:54:36 Set A/D encoding result=40
04:54:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:54:36 Set channel filter=0.000000e+000  result=40
04:54:36 Config A/D  Result=40
04:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:54:36 Get A/D filter: -9.255963e+061  result=40
04:54:36 Get A/D value=-858993460  result=40
04:54:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:54:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:54:36 Parameters OK
04:54:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:54:36 Set A/D data flow result=40
04:54:36 Set A/D channel type result=40
04:54:36 Set A/D encoding result=40
04:54:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:54:36 Set channel filter=0.000000e+000  result=40
04:54:36 Config A/D  Result=40
04:54:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:54:36 Get A/D filter: -9.255963e+061  result=40
04:54:36 Get A/D value=-858993460  result=40
04:54:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:54:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:54:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:54:36 Aux=
04:54:36 Message to Camera, serial 344819 queued
04:55:12 Received message from Master: op=PointingHead serial=344832
04:55:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:55:12 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:55:13 Point started: ret=0
04:55:13 point_skyscan result=0
04:55:14 Check angles
04:55:14 SkyScan query
04:55:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.7<-13580  Statuses=0008 0009
04:55:14 Msec=0  True Az=112.995  Ze=-23.7  Az status=0008  Ze status=0009
04:55:14 Check angles
04:55:14 SkyScan query
04:55:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.655<-14977  Statuses=0008 0009
04:55:15 Msec=750  True Az=112.995  Ze=-44.655  Az status=0008  Ze status=0009
04:55:15 Check angles
04:55:15 SkyScan query
04:55:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.595<-16373  Statuses=0008 0009
04:55:16 Msec=1500  True Az=112.995  Ze=-65.595  Az status=0008  Ze status=0009
04:55:16 Check angles
04:55:16 SkyScan query
04:55:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.565<-17771  Statuses=0008 0009
04:55:16 Msec=2250  True Az=112.995  Ze=-86.565  Az status=0008  Ze status=0009
04:55:17 Check angles
04:55:17 SkyScan query
04:55:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.505<-19167  Statuses=0008 0009
04:55:17 Msec=3000  True Az=112.995  Ze=-107.505  Az status=0008  Ze status=0009
04:55:17 Check angles
04:55:17 SkyScan query
04:55:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.445<-20563  Statuses=0008 0009
04:55:18 Msec=3750  True Az=112.995  Ze=-128.445  Az status=0008  Ze status=0009
04:55:18 Check angles
04:55:18 SkyScan query
04:55:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.415<-21961  Statuses=0008 0009
04:55:19 Msec=4500  True Az=112.995  Ze=-149.415  Az status=0008  Ze status=0009
04:55:19 Check angles
04:55:19 SkyScan query
04:55:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.355<-23357  Statuses=0008 0009
04:55:19 Msec=5250  True Az=112.995  Ze=-170.355  Az status=0008  Ze status=0009
04:55:20 Check angles
04:55:20 SkyScan query
04:55:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:55:20 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:55:20 Message to Master queued w/err=0: serial=344832 error=0
04:55:25 Received message from Master: op=Filter serial=344833
04:55:25 Color wheel filter change from 0 to 0
04:55:25 FLIGetFilterPos err=0  currentPosition=0
04:55:25 FLIGetStepsRemaining err=0  RemainingSteps=0
04:55:25 Filter is already there-color wheel unchanged
04:55:25 Received message from Master: op=Shutter serial=344834
04:55:25 Shutter LASER open
04:55:26 Received message from Camera: op=State serial=344836
04:55:26 GetSingleValue result=40  Value=cccccccc
04:55:26 SkyScan query
04:55:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:55:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:55:26 Parameters OK
04:55:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:55:26 Set A/D data flow result=40
04:55:26 Set A/D channel type result=40
04:55:26 Set A/D encoding result=40
04:55:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:55:26 Set channel filter=0.000000e+000  result=40
04:55:26 Config A/D  Result=40
04:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:55:26 Get A/D filter: -9.255963e+061  result=40
04:55:26 Get A/D value=-858993460  result=40
04:55:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:55:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:55:26 Parameters OK
04:55:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:55:26 Set A/D data flow result=40
04:55:26 Set A/D channel type result=40
04:55:26 Set A/D encoding result=40
04:55:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:55:26 Set channel filter=0.000000e+000  result=40
04:55:26 Config A/D  Result=40
04:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:55:26 Get A/D filter: -9.255963e+061  result=40
04:55:26 Get A/D value=-858993460  result=40
04:55:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:55:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:55:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:55:26 Aux=
04:55:26 Message to Camera, serial 344836 queued
04:55:35 Received message from Master: op=Shutter serial=344846
04:55:35 Shutter LASER close
04:55:35 Received message from Master: op=PointingHead serial=344850
04:55:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:55:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:55:35 Point started: ret=0
04:55:35 point_skyscan result=0
04:55:36 Check angles
04:55:36 SkyScan query
04:55:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
04:55:37 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
04:55:37 Check angles
04:55:37 SkyScan query
04:55:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.71<-20114  Statuses=0008 0009
04:55:37 Msec=750  True Az=112.995  Ze=-121.71  Az status=0008  Ze status=0009
04:55:38 Check angles
04:55:38 SkyScan query
04:55:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
04:55:38 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
04:55:38 Check angles
04:55:38 SkyScan query
04:55:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.83<-17322  Statuses=0008 0009
04:55:39 Msec=2250  True Az=112.995  Ze=-79.83  Az status=0008  Ze status=0009
04:55:39 Check angles
04:55:39 SkyScan query
04:55:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.875<-15925  Statuses=0008 0009
04:55:40 Msec=3000  True Az=112.995  Ze=-58.875  Az status=0008  Ze status=0009
04:55:40 Check angles
04:55:40 SkyScan query
04:55:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.47<-14498  Statuses=0008 0009
04:55:40 Msec=3750  True Az=112.995  Ze=-37.47  Az status=0008  Ze status=0009
04:55:41 Check angles
04:55:41 SkyScan query
04:55:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.05<-13070  Statuses=0008 0009
04:55:41 Msec=4500  True Az=112.995  Ze=-16.05  Az status=0008  Ze status=0009
04:55:41 Check angles
04:55:41 SkyScan query
04:55:42 SkyScan query done: ret=0  az=112.995<-7533  ze=5.025<-11665  Statuses=0008 0009
04:55:42 Msec=5250  True Az=112.995  Ze=5.025  Az status=0008  Ze status=0009
04:55:42 Check angles
04:55:42 SkyScan query
04:55:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:55:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:55:43 Message to Master queued w/err=0: serial=344850 error=0
04:55:48 Received message from Master: op=Filter serial=344851
04:55:48 Color wheel filter change from 0 to 0
04:55:48 FLIGetFilterPos err=0  currentPosition=0
04:55:48 FLIGetStepsRemaining err=0  RemainingSteps=0
04:55:48 Filter is already there-color wheel unchanged
04:55:48 Received message from Master: op=Shutter serial=344852
04:55:48 Shutter LASER close
04:55:48 Received message from Camera: op=State serial=344854
04:55:48 GetSingleValue result=40  Value=cccccccc
04:55:48 SkyScan query
04:55:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:55:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:55:49 Parameters OK
04:55:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:55:49 Set A/D data flow result=40
04:55:49 Set A/D channel type result=40
04:55:49 Set A/D encoding result=40
04:55:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:55:49 Set channel filter=0.000000e+000  result=40
04:55:49 Config A/D  Result=40
04:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:55:49 Get A/D filter: -9.255963e+061  result=40
04:55:49 Get A/D value=-858993460  result=40
04:55:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:55:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:55:49 Parameters OK
04:55:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:55:49 Set A/D data flow result=40
04:55:49 Set A/D channel type result=40
04:55:49 Set A/D encoding result=40
04:55:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:55:49 Set channel filter=0.000000e+000  result=40
04:55:49 Config A/D  Result=40
04:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:55:49 Get A/D filter: -9.255963e+061  result=40
04:55:49 Get A/D value=-858993460  result=40
04:55:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:55:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:55:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:55:49 Aux=
04:55:49 Message to Camera, serial 344854 queued
04:56:25 Received message from Master: op=PointingHead serial=344867
04:56:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:56:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:56:26 Point started: ret=0
04:56:26 point_skyscan result=0
04:56:27 Check angles
04:56:27 SkyScan query
04:56:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:56:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:56:27 Message to Master queued w/err=0: serial=344867 error=0
04:56:32 Received message from Master: op=Filter serial=344868
04:56:32 Color wheel filter change from 0 to 0
04:56:32 FLIGetFilterPos err=0  currentPosition=0
04:56:32 FLIGetStepsRemaining err=0  RemainingSteps=0
04:56:32 Filter is already there-color wheel unchanged
04:56:32 Received message from Master: op=Shutter serial=344869
04:56:32 Shutter LASER close
04:56:32 Received message from Camera: op=State serial=344871
04:56:32 GetSingleValue result=40  Value=cccccccc
04:56:32 SkyScan query
04:56:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:56:33 Parameters OK
04:56:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:56:33 Set A/D data flow result=40
04:56:33 Set A/D channel type result=40
04:56:33 Set A/D encoding result=40
04:56:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:56:33 Set channel filter=0.000000e+000  result=40
04:56:33 Config A/D  Result=40
04:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:56:33 Get A/D filter: -9.255963e+061  result=40
04:56:33 Get A/D value=-858993460  result=40
04:56:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:56:33 Parameters OK
04:56:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:56:33 Set A/D data flow result=40
04:56:33 Set A/D channel type result=40
04:56:33 Set A/D encoding result=40
04:56:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:56:33 Set channel filter=0.000000e+000  result=40
04:56:33 Config A/D  Result=40
04:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:56:33 Get A/D filter: -9.255963e+061  result=40
04:56:33 Get A/D value=-858993460  result=40
04:56:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:56:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:56:33 Aux=
04:56:33 Message to Camera, serial 344871 queued
04:57:10 Received message from Master: op=PointingHead serial=344884
04:57:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:57:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:57:10 Point started: ret=0
04:57:10 point_skyscan result=0
04:57:11 Check angles
04:57:11 SkyScan query
04:57:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:57:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:57:11 Message to Master queued w/err=0: serial=344884 error=0
04:57:16 Received message from Master: op=Filter serial=344885
04:57:16 Color wheel filter change from 0 to 0
04:57:16 FLIGetFilterPos err=0  currentPosition=0
04:57:16 FLIGetStepsRemaining err=0  RemainingSteps=0
04:57:16 Filter is already there-color wheel unchanged
04:57:17 Received message from Master: op=Shutter serial=344886
04:57:17 Shutter LASER close
04:57:17 Received message from Camera: op=State serial=344888
04:57:17 GetSingleValue result=40  Value=cccccccc
04:57:17 SkyScan query
04:57:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:57:17 Parameters OK
04:57:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:57:17 Set A/D data flow result=40
04:57:17 Set A/D channel type result=40
04:57:17 Set A/D encoding result=40
04:57:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:57:17 Set channel filter=0.000000e+000  result=40
04:57:17 Config A/D  Result=40
04:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:57:17 Get A/D filter: -9.255963e+061  result=40
04:57:17 Get A/D value=-858993460  result=40
04:57:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:57:17 Parameters OK
04:57:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:57:17 Set A/D data flow result=40
04:57:17 Set A/D channel type result=40
04:57:17 Set A/D encoding result=40
04:57:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:57:17 Set channel filter=0.000000e+000  result=40
04:57:17 Config A/D  Result=40
04:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:57:17 Get A/D filter: -9.255963e+061  result=40
04:57:17 Get A/D value=-858993460  result=40
04:57:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:57:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:57:17 Aux=
04:57:17 Message to Camera, serial 344888 queued
04:57:54 Received message from Master: op=PointingHead serial=344901
04:57:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:57:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:57:54 Point started: ret=0
04:57:54 point_skyscan result=0
04:57:55 Check angles
04:57:55 SkyScan query
04:57:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:57:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:57:56 Message to Master queued w/err=0: serial=344901 error=0
04:58:01 Received message from Master: op=Filter serial=344902
04:58:01 Color wheel filter change from 0 to 0
04:58:01 FLIGetFilterPos err=0  currentPosition=0
04:58:01 FLIGetStepsRemaining err=0  RemainingSteps=0
04:58:01 Filter is already there-color wheel unchanged
04:58:01 Received message from Master: op=Shutter serial=344903
04:58:01 Shutter LASER close
04:58:01 Received message from Camera: op=State serial=344905
04:58:01 GetSingleValue result=40  Value=cccccccc
04:58:01 SkyScan query
04:58:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:02 Parameters OK
04:58:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:02 Set A/D data flow result=40
04:58:02 Set A/D channel type result=40
04:58:02 Set A/D encoding result=40
04:58:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:02 Set channel filter=0.000000e+000  result=40
04:58:02 Config A/D  Result=40
04:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:02 Get A/D filter: -9.255963e+061  result=40
04:58:02 Get A/D value=-858993460  result=40
04:58:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:02 Parameters OK
04:58:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:02 Set A/D data flow result=40
04:58:02 Set A/D channel type result=40
04:58:02 Set A/D encoding result=40
04:58:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:02 Set channel filter=0.000000e+000  result=40
04:58:02 Config A/D  Result=40
04:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:02 Get A/D filter: -9.255963e+061  result=40
04:58:02 Get A/D value=-858993460  result=40
04:58:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:58:02 Aux=
04:58:02 Message to Camera, serial 344905 queued
04:58:38 Received message from Master: op=PointingHead serial=344918
04:58:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:58:38 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:58:39 Point started: ret=0
04:58:39 point_skyscan result=0
04:58:40 Check angles
04:58:40 SkyScan query
04:58:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
04:58:40 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
04:58:40 Check angles
04:58:40 SkyScan query
04:58:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.535<-14969  Statuses=0008 0009
04:58:41 Msec=750  True Az=112.995  Ze=-44.535  Az status=0008  Ze status=0009
04:58:41 Check angles
04:58:41 SkyScan query
04:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.46<-16364  Statuses=0008 0009
04:58:42 Msec=1500  True Az=112.995  Ze=-65.46  Az status=0008  Ze status=0009
04:58:42 Check angles
04:58:42 SkyScan query
04:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.445<-17763  Statuses=0008 0009
04:58:42 Msec=2250  True Az=112.995  Ze=-86.445  Az status=0008  Ze status=0009
04:58:43 Check angles
04:58:43 SkyScan query
04:58:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.385<-19159  Statuses=0008 0009
04:58:43 Msec=3000  True Az=112.995  Ze=-107.385  Az status=0008  Ze status=0009
04:58:43 Check angles
04:58:43 SkyScan query
04:58:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.76<-20584  Statuses=0008 0009
04:58:44 Msec=3750  True Az=112.995  Ze=-128.76  Az status=0008  Ze status=0009
04:58:44 Check angles
04:58:44 SkyScan query
04:58:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.715<-21981  Statuses=0008 0009
04:58:45 Msec=4500  True Az=112.995  Ze=-149.715  Az status=0008  Ze status=0009
04:58:45 Check angles
04:58:45 SkyScan query
04:58:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
04:58:45 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
04:58:46 Check angles
04:58:46 SkyScan query
04:58:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:58:46 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
04:58:46 Message to Master queued w/err=0: serial=344918 error=0
04:58:51 Received message from Master: op=Filter serial=344919
04:58:51 Color wheel filter change from 0 to 0
04:58:51 FLIGetFilterPos err=0  currentPosition=0
04:58:51 FLIGetStepsRemaining err=0  RemainingSteps=0
04:58:51 Filter is already there-color wheel unchanged
04:58:51 Received message from Master: op=Shutter serial=344920
04:58:51 Shutter LASER open
04:58:51 Received message from Camera: op=State serial=344922
04:58:51 GetSingleValue result=40  Value=cccccccc
04:58:51 SkyScan query
04:58:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:58:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:52 Parameters OK
04:58:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:52 Set A/D data flow result=40
04:58:52 Set A/D channel type result=40
04:58:52 Set A/D encoding result=40
04:58:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:52 Set channel filter=0.000000e+000  result=40
04:58:52 Config A/D  Result=40
04:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:52 Get A/D filter: -9.255963e+061  result=40
04:58:52 Get A/D value=-858993460  result=40
04:58:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:52 Parameters OK
04:58:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:52 Set A/D data flow result=40
04:58:52 Set A/D channel type result=40
04:58:52 Set A/D encoding result=40
04:58:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:52 Set channel filter=0.000000e+000  result=40
04:58:52 Config A/D  Result=40
04:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:52 Get A/D filter: -9.255963e+061  result=40
04:58:52 Get A/D value=-858993460  result=40
04:58:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:58:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:58:52 Aux=
04:58:52 Message to Camera, serial 344922 queued
04:59:00 Received message from Master: op=Shutter serial=344932
04:59:00 Shutter LASER close
04:59:01 Received message from Master: op=PointingHead serial=344936
04:59:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:59:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:59:01 Point started: ret=0
04:59:01 point_skyscan result=0
04:59:02 Check angles
04:59:02 SkyScan query
04:59:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.145<-21543  Statuses=0008 0009
04:59:03 Msec=0  True Az=112.995  Ze=-143.145  Az status=0008  Ze status=0009
04:59:03 Check angles
04:59:03 SkyScan query
04:59:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.19<-20146  Statuses=0008 0009
04:59:03 Msec=750  True Az=112.995  Ze=-122.19  Az status=0008  Ze status=0009
04:59:04 Check angles
04:59:04 SkyScan query
04:59:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.815<-18721  Statuses=0008 0009
04:59:04 Msec=1500  True Az=112.995  Ze=-100.815  Az status=0008  Ze status=0009
04:59:04 Check angles
04:59:04 SkyScan query
04:59:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.86<-17324  Statuses=0008 0009
04:59:05 Msec=2250  True Az=112.995  Ze=-79.86  Az status=0008  Ze status=0009
04:59:05 Check angles
04:59:05 SkyScan query
04:59:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.44<-15896  Statuses=0008 0009
04:59:06 Msec=3000  True Az=112.995  Ze=-58.44  Az status=0008  Ze status=0009
04:59:06 Check angles
04:59:06 SkyScan query
04:59:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.5<-14500  Statuses=0008 0009
04:59:06 Msec=3750  True Az=112.995  Ze=-37.5  Az status=0008  Ze status=0009
04:59:07 Check angles
04:59:07 SkyScan query
04:59:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.53<-13102  Statuses=0008 0009
04:59:07 Msec=4500  True Az=112.995  Ze=-16.53  Az status=0008  Ze status=0009
04:59:07 Check angles
04:59:07 SkyScan query
04:59:08 SkyScan query done: ret=0  az=112.995<-7533  ze=4.68<-11688  Statuses=0008 0009
04:59:08 Msec=5250  True Az=112.995  Ze=4.68  Az status=0008  Ze status=0009
04:59:08 Check angles
04:59:08 SkyScan query
04:59:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:59:09 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:59:09 Message to Master queued w/err=0: serial=344936 error=0
04:59:14 Received message from Master: op=Filter serial=344937
04:59:14 Color wheel filter change from 0 to 0
04:59:14 FLIGetFilterPos err=0  currentPosition=0
04:59:14 FLIGetStepsRemaining err=0  RemainingSteps=0
04:59:14 Filter is already there-color wheel unchanged
04:59:14 Received message from Master: op=Shutter serial=344938
04:59:14 Shutter LASER close
04:59:14 Received message from Camera: op=State serial=344940
04:59:14 GetSingleValue result=40  Value=cccccccc
04:59:14 SkyScan query
04:59:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:59:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:59:15 Parameters OK
04:59:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:59:15 Set A/D data flow result=40
04:59:15 Set A/D channel type result=40
04:59:15 Set A/D encoding result=40
04:59:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:59:15 Set channel filter=0.000000e+000  result=40
04:59:15 Config A/D  Result=40
04:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:59:15 Get A/D filter: -9.255963e+061  result=40
04:59:15 Get A/D value=-858993460  result=40
04:59:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:59:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:59:15 Parameters OK
04:59:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:59:15 Set A/D data flow result=40
04:59:15 Set A/D channel type result=40
04:59:15 Set A/D encoding result=40
04:59:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:59:15 Set channel filter=0.000000e+000  result=40
04:59:15 Config A/D  Result=40
04:59:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:59:15 Get A/D filter: -9.255963e+061  result=40
04:59:15 Get A/D value=-858993460  result=40
04:59:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:59:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:59:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:59:15 Aux=
04:59:15 Message to Camera, serial 344940 queued
04:59:52 Received message from Master: op=PointingHead serial=344953
04:59:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:59:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:59:52 Point started: ret=0
04:59:52 point_skyscan result=0
04:59:53 Check angles
04:59:53 SkyScan query
04:59:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:59:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:59:53 Message to Master queued w/err=0: serial=344953 error=0
04:59:58 Received message from Master: op=Filter serial=344954
04:59:58 Color wheel filter change from 0 to 0
04:59:58 FLIGetFilterPos err=0  currentPosition=0
04:59:58 FLIGetStepsRemaining err=0  RemainingSteps=0
04:59:58 Filter is already there-color wheel unchanged
04:59:58 Received message from Master: op=Shutter serial=344955
04:59:58 Shutter LASER close
04:59:58 Received message from Camera: op=State serial=344957
04:59:58 GetSingleValue result=40  Value=cccccccc
04:59:58 SkyScan query
04:59:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:59:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:59:59 Parameters OK
04:59:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:59:59 Set A/D data flow result=40
04:59:59 Set A/D channel type result=40
04:59:59 Set A/D encoding result=40
04:59:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:59:59 Set channel filter=0.000000e+000  result=40
04:59:59 Config A/D  Result=40
04:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:59:59 Get A/D filter: -9.255963e+061  result=40
04:59:59 Get A/D value=-858993460  result=40
04:59:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:59:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:59:59 Parameters OK
04:59:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:59:59 Set A/D data flow result=40
04:59:59 Set A/D channel type result=40
04:59:59 Set A/D encoding result=40
04:59:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:59:59 Set channel filter=0.000000e+000  result=40
04:59:59 Config A/D  Result=40
04:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:59:59 Get A/D filter: -9.255963e+061  result=40
04:59:59 Get A/D value=-858993460  result=40
04:59:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:59:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:59:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:59:59 Aux=
04:59:59 Message to Camera, serial 344957 queued
05:00:36 Received message from Master: op=PointingHead serial=344970
05:00:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:00:36 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:00:36 Point started: ret=0
05:00:36 point_skyscan result=0
05:00:37 Check angles
05:00:37 SkyScan query
05:00:37 SkyScan query done: ret=0  az=136.155<-9077  ze=-6.51<-12434  Statuses=0009 0008
05:00:37 Msec=0  True Az=136.155  Ze=-6.51  Az status=0009  Ze status=0008
05:00:38 Check angles
05:00:38 SkyScan query
05:00:38 SkyScan query done: ret=0  az=153.675<-10245  ze=-6.495<-12433  Statuses=0009 0008
05:00:38 Msec=750  True Az=153.675  Ze=-6.495  Az status=0009  Ze status=0008
05:00:38 Check angles
05:00:38 SkyScan query
05:00:39 SkyScan query done: ret=0  az=171.21<-11414  ze=-6.495<-12433  Statuses=0009 0008
05:00:39 Msec=1500  True Az=171.21  Ze=-6.495  Az status=0009  Ze status=0008
05:00:39 Check angles
05:00:39 SkyScan query
05:00:40 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:00:40 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:00:40 Message to Master queued w/err=0: serial=344970 error=0
05:00:45 Received message from Master: op=Filter serial=344971
05:00:45 Color wheel filter change from 0 to 0
05:00:45 FLIGetFilterPos err=0  currentPosition=0
05:00:45 FLIGetStepsRemaining err=0  RemainingSteps=0
05:00:45 Filter is already there-color wheel unchanged
05:00:45 Received message from Master: op=Shutter serial=344972
05:00:45 Shutter LASER close
05:00:45 Received message from Camera: op=State serial=344974
05:00:45 GetSingleValue result=40  Value=cccccccc
05:00:45 SkyScan query
05:00:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:00:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:00:46 Parameters OK
05:00:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:00:46 Set A/D data flow result=40
05:00:46 Set A/D channel type result=40
05:00:46 Set A/D encoding result=40
05:00:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:00:46 Set channel filter=0.000000e+000  result=40
05:00:46 Config A/D  Result=40
05:00:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:00:46 Get A/D filter: -9.255963e+061  result=40
05:00:46 Get A/D value=-858993460  result=40
05:00:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:00:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:00:46 Parameters OK
05:00:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:00:46 Set A/D data flow result=40
05:00:46 Set A/D channel type result=40
05:00:46 Set A/D encoding result=40
05:00:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:00:46 Set channel filter=0.000000e+000  result=40
05:00:46 Config A/D  Result=40
05:00:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:00:46 Get A/D filter: -9.255963e+061  result=40
05:00:46 Get A/D value=-858993460  result=40
05:00:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:00:46 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:00:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:00:46 Aux=
05:00:46 Message to Camera, serial 344974 queued
05:01:22 Received message from Master: op=PointingHead serial=344987
05:01:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:01:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:01:23 Point started: ret=0
05:01:23 point_skyscan result=0
05:01:24 Check angles
05:01:24 SkyScan query
05:01:24 SkyScan query done: ret=0  az=152.895<-10193  ze=6.51<-11566  Statuses=0009 0008
05:01:24 Msec=0  True Az=152.895  Ze=6.51  Az status=0009  Ze status=0008
05:01:24 Check angles
05:01:24 SkyScan query
05:01:25 SkyScan query done: ret=0  az=135.33<-9022  ze=6.495<-11567  Statuses=0009 0008
05:01:25 Msec=750  True Az=135.33  Ze=6.495  Az status=0009  Ze status=0008
05:01:25 Check angles
05:01:25 SkyScan query
05:01:26 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
05:01:26 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
05:01:26 Check angles
05:01:26 SkyScan query
05:01:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:01:26 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:01:26 Message to Master queued w/err=0: serial=344987 error=0
05:01:31 Received message from Master: op=Filter serial=344988
05:01:31 Color wheel filter change from 0 to 0
05:01:31 FLIGetFilterPos err=0  currentPosition=0
05:01:31 FLIGetStepsRemaining err=0  RemainingSteps=0
05:01:31 Filter is already there-color wheel unchanged
05:01:32 Received message from Master: op=Shutter serial=344989
05:01:32 Shutter LASER close
05:01:32 Received message from Camera: op=State serial=344991
05:01:32 GetSingleValue result=40  Value=cccccccc
05:01:32 SkyScan query
05:01:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:01:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:01:32 Parameters OK
05:01:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:01:32 Set A/D data flow result=40
05:01:32 Set A/D channel type result=40
05:01:32 Set A/D encoding result=40
05:01:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:01:32 Set channel filter=0.000000e+000  result=40
05:01:32 Config A/D  Result=40
05:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:01:32 Get A/D filter: -9.255963e+061  result=40
05:01:32 Get A/D value=-858993460  result=40
05:01:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:01:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:01:32 Parameters OK
05:01:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:01:32 Set A/D data flow result=40
05:01:32 Set A/D channel type result=40
05:01:32 Set A/D encoding result=40
05:01:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:01:32 Set channel filter=0.000000e+000  result=40
05:01:32 Config A/D  Result=40
05:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:01:32 Get A/D filter: -9.255963e+061  result=40
05:01:32 Get A/D value=-858993460  result=40
05:01:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:01:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:01:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:01:32 Aux=
05:01:32 Message to Camera, serial 344991 queued
05:02:09 Received message from Master: op=PointingHead serial=345004
05:02:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:02:09 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:02:09 Point started: ret=0
05:02:09 point_skyscan result=0
05:02:10 Check angles
05:02:10 SkyScan query
05:02:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.235<-13549  Statuses=0008 0009
05:02:11 Msec=0  True Az=112.995  Ze=-23.235  Az status=0008  Ze status=0009
05:02:11 Check angles
05:02:11 SkyScan query
05:02:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.205<-14947  Statuses=0008 0009
05:02:11 Msec=750  True Az=112.995  Ze=-44.205  Az status=0008  Ze status=0009
05:02:12 Check angles
05:02:12 SkyScan query
05:02:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.58<-16372  Statuses=0008 0009
05:02:12 Msec=1500  True Az=112.995  Ze=-65.58  Az status=0008  Ze status=0009
05:02:12 Check angles
05:02:12 SkyScan query
05:02:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.535<-17769  Statuses=0008 0009
05:02:13 Msec=2250  True Az=112.995  Ze=-86.535  Az status=0008  Ze status=0009
05:02:13 Check angles
05:02:13 SkyScan query
05:02:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.49<-19166  Statuses=0008 0009
05:02:14 Msec=3000  True Az=112.995  Ze=-107.49  Az status=0008  Ze status=0009
05:02:14 Check angles
05:02:14 SkyScan query
05:02:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.865<-20591  Statuses=0008 0009
05:02:14 Msec=3750  True Az=112.995  Ze=-128.865  Az status=0008  Ze status=0009
05:02:15 Check angles
05:02:15 SkyScan query
05:02:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.82<-21988  Statuses=0008 0009
05:02:15 Msec=4500  True Az=112.995  Ze=-149.82  Az status=0008  Ze status=0009
05:02:15 Check angles
05:02:15 SkyScan query
05:02:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.73<-23382  Statuses=0008 0009
05:02:16 Msec=5250  True Az=112.995  Ze=-170.73  Az status=0008  Ze status=0009
05:02:16 Check angles
05:02:16 SkyScan query
05:02:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:02:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:02:17 Message to Master queued w/err=0: serial=345004 error=0
05:02:22 Received message from Master: op=Filter serial=345005
05:02:22 Color wheel filter change from 0 to 0
05:02:22 FLIGetFilterPos err=0  currentPosition=0
05:02:22 FLIGetStepsRemaining err=0  RemainingSteps=0
05:02:22 Filter is already there-color wheel unchanged
05:02:22 Received message from Master: op=Shutter serial=345006
05:02:22 Shutter LASER open
05:02:22 Received message from Camera: op=State serial=345008
05:02:22 GetSingleValue result=40  Value=cccccccc
05:02:22 SkyScan query
05:02:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:02:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:02:23 Parameters OK
05:02:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:02:23 Set A/D data flow result=40
05:02:23 Set A/D channel type result=40
05:02:23 Set A/D encoding result=40
05:02:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:02:23 Set channel filter=0.000000e+000  result=40
05:02:23 Config A/D  Result=40
05:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:02:23 Get A/D filter: -9.255963e+061  result=40
05:02:23 Get A/D value=-858993460  result=40
05:02:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:02:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:02:23 Parameters OK
05:02:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:02:23 Set A/D data flow result=40
05:02:23 Set A/D channel type result=40
05:02:23 Set A/D encoding result=40
05:02:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:02:23 Set channel filter=0.000000e+000  result=40
05:02:23 Config A/D  Result=40
05:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:02:23 Get A/D filter: -9.255963e+061  result=40
05:02:23 Get A/D value=-858993460  result=40
05:02:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:02:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:02:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:02:23 Aux=
05:02:23 Message to Camera, serial 345008 queued
05:02:31 Received message from Master: op=Shutter serial=345018
05:02:31 Shutter LASER close
05:02:32 Received message from Master: op=PointingHead serial=345022
05:02:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:02:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:02:32 Point started: ret=0
05:02:32 point_skyscan result=0
05:02:33 Check angles
05:02:33 SkyScan query
05:02:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.74<-21516  Statuses=0008 0009
05:02:33 Msec=0  True Az=112.995  Ze=-142.74  Az status=0008  Ze status=0009
05:02:33 Check angles
05:02:33 SkyScan query
05:02:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.77<-20118  Statuses=0008 0009
05:02:34 Msec=750  True Az=112.995  Ze=-121.77  Az status=0008  Ze status=0009
05:02:34 Check angles
05:02:34 SkyScan query
05:02:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.395<-18693  Statuses=0008 0009
05:02:35 Msec=1500  True Az=112.995  Ze=-100.395  Az status=0008  Ze status=0009
05:02:35 Check angles
05:02:35 SkyScan query
05:02:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.44<-17296  Statuses=0008 0009
05:02:35 Msec=2250  True Az=112.995  Ze=-79.44  Az status=0008  Ze status=0009
05:02:36 Check angles
05:02:36 SkyScan query
05:02:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.47<-15898  Statuses=0008 0009
05:02:36 Msec=3000  True Az=112.995  Ze=-58.47  Az status=0008  Ze status=0009
05:02:36 Check angles
05:02:36 SkyScan query
05:02:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.545<-14503  Statuses=0008 0009
05:02:37 Msec=3750  True Az=112.995  Ze=-37.545  Az status=0008  Ze status=0009
05:02:37 Check angles
05:02:37 SkyScan query
05:02:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
05:02:38 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
05:02:38 Check angles
05:02:38 SkyScan query
05:02:38 SkyScan query done: ret=0  az=112.995<-7533  ze=4.32<-11712  Statuses=0008 0009
05:02:38 Msec=5250  True Az=112.995  Ze=4.32  Az status=0008  Ze status=0009
05:02:39 Check angles
05:02:39 SkyScan query
05:02:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:02:39 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:02:39 Message to Master queued w/err=0: serial=345022 error=0
05:02:44 Received message from Master: op=Filter serial=345023
05:02:44 Color wheel filter change from 0 to 0
05:02:44 FLIGetFilterPos err=0  currentPosition=0
05:02:44 FLIGetStepsRemaining err=0  RemainingSteps=0
05:02:44 Filter is already there-color wheel unchanged
05:02:44 Received message from Master: op=Shutter serial=345024
05:02:44 Shutter LASER close
05:02:45 Received message from Camera: op=State serial=345026
05:02:45 GetSingleValue result=40  Value=cccccccc
05:02:45 SkyScan query
05:02:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:02:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:02:45 Parameters OK
05:02:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:02:45 Set A/D data flow result=40
05:02:45 Set A/D channel type result=40
05:02:45 Set A/D encoding result=40
05:02:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:02:45 Set channel filter=0.000000e+000  result=40
05:02:45 Config A/D  Result=40
05:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:02:45 Get A/D filter: -9.255963e+061  result=40
05:02:45 Get A/D value=-858993460  result=40
05:02:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:02:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:02:45 Parameters OK
05:02:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:02:45 Set A/D data flow result=40
05:02:45 Set A/D channel type result=40
05:02:45 Set A/D encoding result=40
05:02:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:02:45 Set channel filter=0.000000e+000  result=40
05:02:45 Config A/D  Result=40
05:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:02:45 Get A/D filter: -9.255963e+061  result=40
05:02:45 Get A/D value=-858993460  result=40
05:02:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:02:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:02:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:02:45 Aux=
05:02:45 Message to Camera, serial 345026 queued
05:03:22 Received message from Master: op=PointingHead serial=345039
05:03:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:03:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:03:22 Point started: ret=0
05:03:22 point_skyscan result=0
05:03:23 Check angles
05:03:23 SkyScan query
05:03:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:03:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:03:24 Message to Master queued w/err=0: serial=345039 error=0
05:03:29 Received message from Master: op=Filter serial=345040
05:03:29 Color wheel filter change from 0 to 0
05:03:29 FLIGetFilterPos err=0  currentPosition=0
05:03:29 FLIGetStepsRemaining err=0  RemainingSteps=0
05:03:29 Filter is already there-color wheel unchanged
05:03:29 Received message from Master: op=Shutter serial=345041
05:03:29 Shutter LASER close
05:03:29 Received message from Camera: op=State serial=345043
05:03:29 GetSingleValue result=40  Value=cccccccc
05:03:29 SkyScan query
05:03:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:03:29 Parameters OK
05:03:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:03:29 Set A/D data flow result=40
05:03:29 Set A/D channel type result=40
05:03:29 Set A/D encoding result=40
05:03:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:03:29 Set channel filter=0.000000e+000  result=40
05:03:29 Config A/D  Result=40
05:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:03:29 Get A/D filter: -9.255963e+061  result=40
05:03:29 Get A/D value=-858993460  result=40
05:03:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:03:29 Parameters OK
05:03:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:03:29 Set A/D data flow result=40
05:03:29 Set A/D channel type result=40
05:03:29 Set A/D encoding result=40
05:03:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:03:29 Set channel filter=0.000000e+000  result=40
05:03:29 Config A/D  Result=40
05:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:03:29 Get A/D filter: -9.255963e+061  result=40
05:03:29 Get A/D value=-858993460  result=40
05:03:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:03:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:03:29 Aux=
05:03:29 Message to Camera, serial 345043 queued
05:03:35 Received message from Master: op=Identify serial=345044
[UTC 2019-3-19  05:03:48]
05:04:06 Received message from Master: op=PointingHead serial=345059
05:04:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:04:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:04:07 Point started: ret=0
05:04:07 point_skyscan result=0
05:04:07 Check angles
05:04:07 SkyScan query
05:04:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:04:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:04:08 Message to Master queued w/err=0: serial=345059 error=0
05:04:13 Received message from Master: op=Filter serial=345060
05:04:13 Color wheel filter change from 0 to 0
05:04:13 FLIGetFilterPos err=0  currentPosition=0
05:04:13 FLIGetStepsRemaining err=0  RemainingSteps=0
05:04:13 Filter is already there-color wheel unchanged
05:04:13 Received message from Master: op=Shutter serial=345061
05:04:13 Shutter LASER close
05:04:13 Received message from Camera: op=State serial=345063
05:04:13 GetSingleValue result=40  Value=cccccccc
05:04:13 SkyScan query
05:04:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:04:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:04:14 Parameters OK
05:04:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:04:14 Set A/D data flow result=40
05:04:14 Set A/D channel type result=40
05:04:14 Set A/D encoding result=40
05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:04:14 Set channel filter=0.000000e+000  result=40
05:04:14 Config A/D  Result=40
05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:04:14 Get A/D filter: -9.255963e+061  result=40
05:04:14 Get A/D value=-858993460  result=40
05:04:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:04:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:04:14 Parameters OK
05:04:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:04:14 Set A/D data flow result=40
05:04:14 Set A/D channel type result=40
05:04:14 Set A/D encoding result=40
05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:04:14 Set channel filter=0.000000e+000  result=40
05:04:14 Config A/D  Result=40
05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:04:14 Get A/D filter: -9.255963e+061  result=40
05:04:14 Get A/D value=-858993460  result=40
05:04:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:04:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:04:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:04:14 Aux=
05:04:14 Message to Camera, serial 345063 queued
05:04:51 Received message from Master: op=PointingHead serial=345076
05:04:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:04:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:04:51 Point started: ret=0
05:04:51 point_skyscan result=0
05:04:52 Check angles
05:04:52 SkyScan query
05:04:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
05:04:52 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
05:04:52 Message to Master queued w/err=0: serial=345076 error=0
05:04:57 Received message from Master: op=Filter serial=345077
05:04:57 Color wheel filter change from 0 to 0
05:04:57 FLIGetFilterPos err=0  currentPosition=0
05:04:57 FLIGetStepsRemaining err=0  RemainingSteps=0
05:04:57 Filter is already there-color wheel unchanged
05:04:57 Received message from Master: op=Shutter serial=345078
05:04:57 Shutter LASER close
05:04:57 Received message from Camera: op=State serial=345080
05:04:57 GetSingleValue result=40  Value=cccccccc
05:04:57 SkyScan query
05:04:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:04:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:04:58 Parameters OK
05:04:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:04:58 Set A/D data flow result=40
05:04:58 Set A/D channel type result=40
05:04:58 Set A/D encoding result=40
05:04:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:04:58 Set channel filter=0.000000e+000  result=40
05:04:58 Config A/D  Result=40
05:04:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:04:58 Get A/D filter: -9.255963e+061  result=40
05:04:58 Get A/D value=-858993460  result=40
05:04:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:04:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:04:58 Parameters OK
05:04:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:04:58 Set A/D data flow result=40
05:04:58 Set A/D channel type result=40
05:04:58 Set A/D encoding result=40
05:04:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:04:58 Set channel filter=0.000000e+000  result=40
05:04:58 Config A/D  Result=40
05:04:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:04:58 Get A/D filter: -9.255963e+061  result=40
05:04:58 Get A/D value=-858993460  result=40
05:04:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:04:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:04:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:04:58 Aux=
05:04:58 Message to Camera, serial 345080 queued
05:05:35 Received message from Master: op=PointingHead serial=345093
05:05:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:05:35 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:05:35 Point started: ret=0
05:05:35 point_skyscan result=0
05:05:36 Check angles
05:05:36 SkyScan query
05:05:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
05:05:37 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
05:05:37 Check angles
05:05:37 SkyScan query
05:05:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.61<-14974  Statuses=0008 0009
05:05:37 Msec=750  True Az=112.995  Ze=-44.61  Az status=0008  Ze status=0009
05:05:37 Check angles
05:05:37 SkyScan query
05:05:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
05:05:38 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
05:05:38 Check angles
05:05:38 SkyScan query
05:05:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.46<-17764  Statuses=0008 0009
05:05:39 Msec=2250  True Az=112.995  Ze=-86.46  Az status=0008  Ze status=0009
05:05:39 Check angles
05:05:39 SkyScan query
05:05:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.85<-19190  Statuses=0008 0009
05:05:40 Msec=3000  True Az=112.995  Ze=-107.85  Az status=0008  Ze status=0009
05:05:40 Check angles
05:05:40 SkyScan query
05:05:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.79<-20586  Statuses=0008 0009
05:05:40 Msec=3750  True Az=112.995  Ze=-128.79  Az status=0008  Ze status=0009
05:05:40 Check angles
05:05:40 SkyScan query
05:05:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.76<-21984  Statuses=0008 0009
05:05:41 Msec=4500  True Az=112.995  Ze=-149.76  Az status=0008  Ze status=0009
05:05:41 Check angles
05:05:41 SkyScan query
05:05:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.015<-23401  Statuses=0008 0009
05:05:42 Msec=5250  True Az=112.995  Ze=-171.015  Az status=0008  Ze status=0009
05:05:42 Check angles
05:05:42 SkyScan query
05:05:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:05:43 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
05:05:43 Message to Master queued w/err=0: serial=345093 error=0
05:05:48 Received message from Master: op=Filter serial=345094
05:05:48 Color wheel filter change from 0 to 0
05:05:48 FLIGetFilterPos err=0  currentPosition=0
05:05:48 FLIGetStepsRemaining err=0  RemainingSteps=0
05:05:48 Filter is already there-color wheel unchanged
05:05:48 Received message from Master: op=Shutter serial=345095
05:05:48 Shutter LASER open
05:05:48 Received message from Camera: op=State serial=345097
05:05:48 GetSingleValue result=40  Value=cccccccc
05:05:48 SkyScan query
05:05:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:05:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:05:49 Parameters OK
05:05:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:05:49 Set A/D data flow result=40
05:05:49 Set A/D channel type result=40
05:05:49 Set A/D encoding result=40
05:05:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:05:49 Set channel filter=0.000000e+000  result=40
05:05:49 Config A/D  Result=40
05:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:05:49 Get A/D filter: -9.255963e+061  result=40
05:05:49 Get A/D value=-858993460  result=40
05:05:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:05:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:05:49 Parameters OK
05:05:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:05:49 Set A/D data flow result=40
05:05:49 Set A/D channel type result=40
05:05:49 Set A/D encoding result=40
05:05:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:05:49 Set channel filter=0.000000e+000  result=40
05:05:49 Config A/D  Result=40
05:05:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:05:49 Get A/D filter: -9.255963e+061  result=40
05:05:49 Get A/D value=-858993460  result=40
05:05:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:05:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:05:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:05:49 Aux=
05:05:49 Message to Camera, serial 345097 queued
05:05:57 Received message from Master: op=Shutter serial=345107
05:05:57 Shutter LASER close
05:05:58 Received message from Master: op=PointingHead serial=345111
05:05:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:05:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:05:58 Point started: ret=0
05:05:58 point_skyscan result=0
05:05:59 Check angles
05:05:59 SkyScan query
05:05:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
05:05:59 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
05:06:00 Check angles
05:06:00 SkyScan query
05:06:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.59<-20106  Statuses=0008 0009
05:06:00 Msec=750  True Az=112.995  Ze=-121.59  Az status=0008  Ze status=0009
05:06:00 Check angles
05:06:00 SkyScan query
05:06:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.65<-18710  Statuses=0008 0009
05:06:01 Msec=1500  True Az=112.995  Ze=-100.65  Az status=0008  Ze status=0009
05:06:01 Check angles
05:06:01 SkyScan query
05:06:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.695<-17313  Statuses=0008 0009
05:06:02 Msec=2250  True Az=112.995  Ze=-79.695  Az status=0008  Ze status=0009
05:06:02 Check angles
05:06:02 SkyScan query
05:06:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.725<-15915  Statuses=0008 0009
05:06:02 Msec=3000  True Az=112.995  Ze=-58.725  Az status=0008  Ze status=0009
05:06:03 Check angles
05:06:03 SkyScan query
05:06:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.77<-14518  Statuses=0008 0009
05:06:03 Msec=3750  True Az=112.995  Ze=-37.77  Az status=0008  Ze status=0009
05:06:03 Check angles
05:06:03 SkyScan query
05:06:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.365<-13091  Statuses=0008 0009
05:06:04 Msec=4500  True Az=112.995  Ze=-16.365  Az status=0008  Ze status=0009
05:06:04 Check angles
05:06:04 SkyScan query
05:06:05 SkyScan query done: ret=0  az=112.995<-7533  ze=4.47<-11702  Statuses=0008 0009
05:06:05 Msec=5250  True Az=112.995  Ze=4.47  Az status=0008  Ze status=0009
05:06:05 Check angles
05:06:05 SkyScan query
05:06:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:06:05 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:06:05 Message to Master queued w/err=0: serial=345111 error=0
05:06:10 Received message from Master: op=Filter serial=345112
05:06:10 Color wheel filter change from 0 to 0
05:06:10 FLIGetFilterPos err=0  currentPosition=0
05:06:10 FLIGetStepsRemaining err=0  RemainingSteps=0
05:06:10 Filter is already there-color wheel unchanged
05:06:11 Received message from Master: op=Shutter serial=345113
05:06:11 Shutter LASER close
05:06:11 Received message from Camera: op=State serial=345115
05:06:11 GetSingleValue result=40  Value=cccccccc
05:06:11 SkyScan query
05:06:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:06:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:06:11 Parameters OK
05:06:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:06:11 Set A/D data flow result=40
05:06:11 Set A/D channel type result=40
05:06:11 Set A/D encoding result=40
05:06:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:06:11 Set channel filter=0.000000e+000  result=40
05:06:11 Config A/D  Result=40
05:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:06:11 Get A/D filter: -9.255963e+061  result=40
05:06:11 Get A/D value=-858993460  result=40
05:06:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:06:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:06:11 Parameters OK
05:06:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:06:11 Set A/D data flow result=40
05:06:11 Set A/D channel type result=40
05:06:11 Set A/D encoding result=40
05:06:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:06:11 Set channel filter=0.000000e+000  result=40
05:06:11 Config A/D  Result=40
05:06:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:06:11 Get A/D filter: -9.255963e+061  result=40
05:06:11 Get A/D value=-858993460  result=40
05:06:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:06:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:06:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:06:11 Aux=
05:06:11 Message to Camera, serial 345115 queued
05:06:48 Received message from Master: op=PointingHead serial=345128
05:06:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:06:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:06:48 Point started: ret=0
05:06:48 point_skyscan result=0
05:06:49 Check angles
05:06:49 SkyScan query
05:06:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:06:50 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:06:50 Message to Master queued w/err=0: serial=345128 error=0
05:06:55 Received message from Master: op=Filter serial=345129
05:06:55 Color wheel filter change from 0 to 0
05:06:55 FLIGetFilterPos err=0  currentPosition=0
05:06:55 FLIGetStepsRemaining err=0  RemainingSteps=0
05:06:55 Filter is already there-color wheel unchanged
05:06:55 Received message from Master: op=Shutter serial=345130
05:06:55 Shutter LASER close
05:06:55 Received message from Camera: op=State serial=345132
05:06:55 GetSingleValue result=40  Value=cccccccc
05:06:55 SkyScan query
05:06:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:06:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:06:56 Parameters OK
05:06:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:06:56 Set A/D data flow result=40
05:06:56 Set A/D channel type result=40
05:06:56 Set A/D encoding result=40
05:06:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:06:56 Set channel filter=0.000000e+000  result=40
05:06:56 Config A/D  Result=40
05:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:06:56 Get A/D filter: -9.255963e+061  result=40
05:06:56 Get A/D value=-858993460  result=40
05:06:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:06:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:06:56 Parameters OK
05:06:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:06:56 Set A/D data flow result=40
05:06:56 Set A/D channel type result=40
05:06:56 Set A/D encoding result=40
05:06:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:06:56 Set channel filter=0.000000e+000  result=40
05:06:56 Config A/D  Result=40
05:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:06:56 Get A/D filter: -9.255963e+061  result=40
05:06:56 Get A/D value=-858993460  result=40
05:06:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:06:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:06:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:06:56 Aux=
05:06:56 Message to Camera, serial 345132 queued
05:07:32 Received message from Master: op=PointingHead serial=345145
05:07:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:07:32 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:07:33 Point started: ret=0
05:07:33 point_skyscan result=0
05:07:34 Check angles
05:07:34 SkyScan query
05:07:34 SkyScan query done: ret=0  az=136.365<-9091  ze=-6.51<-12434  Statuses=0009 0008
05:07:34 Msec=0  True Az=136.365  Ze=-6.51  Az status=0009  Ze status=0008
05:07:34 Check angles
05:07:34 SkyScan query
05:07:35 SkyScan query done: ret=0  az=153.87<-10258  ze=-6.495<-12433  Statuses=0009 0008
05:07:35 Msec=750  True Az=153.87  Ze=-6.495  Az status=0009  Ze status=0008
05:07:35 Check angles
05:07:35 SkyScan query
05:07:36 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.495<-12433  Statuses=0009 0008
05:07:36 Msec=1500  True Az=171.33  Ze=-6.495  Az status=0009  Ze status=0008
05:07:36 Check angles
05:07:36 SkyScan query
05:07:36 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:07:36 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:07:36 Message to Master queued w/err=0: serial=345145 error=0
05:07:41 Received message from Master: op=Filter serial=345146
05:07:41 Color wheel filter change from 0 to 0
05:07:41 FLIGetFilterPos err=0  currentPosition=0
05:07:41 FLIGetStepsRemaining err=0  RemainingSteps=0
05:07:41 Filter is already there-color wheel unchanged
05:07:42 Received message from Master: op=Shutter serial=345147
05:07:42 Shutter LASER close
05:07:42 Received message from Camera: op=State serial=345149
05:07:42 GetSingleValue result=40  Value=cccccccc
05:07:42 SkyScan query
05:07:42 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:07:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:07:42 Parameters OK
05:07:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:07:42 Set A/D data flow result=40
05:07:42 Set A/D channel type result=40
05:07:42 Set A/D encoding result=40
05:07:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:07:42 Set channel filter=0.000000e+000  result=40
05:07:42 Config A/D  Result=40
05:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:07:42 Get A/D filter: -9.255963e+061  result=40
05:07:42 Get A/D value=-858993460  result=40
05:07:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:07:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:07:42 Parameters OK
05:07:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:07:42 Set A/D data flow result=40
05:07:42 Set A/D channel type result=40
05:07:42 Set A/D encoding result=40
05:07:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:07:42 Set channel filter=0.000000e+000  result=40
05:07:42 Config A/D  Result=40
05:07:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:07:42 Get A/D filter: -9.255963e+061  result=40
05:07:42 Get A/D value=-858993460  result=40
05:07:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:07:42 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:07:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:07:42 Aux=
05:07:42 Message to Camera, serial 345149 queued
05:08:19 Received message from Master: op=PointingHead serial=345162
05:08:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:08:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:08:19 Point started: ret=0
05:08:19 point_skyscan result=0
05:08:20 Check angles
05:08:20 SkyScan query
05:08:21 SkyScan query done: ret=0  az=153.135<-10209  ze=6.51<-11566  Statuses=0009 0008
05:08:21 Msec=0  True Az=153.135  Ze=6.51  Az status=0009  Ze status=0008
05:08:21 Check angles
05:08:21 SkyScan query
05:08:21 SkyScan query done: ret=0  az=135.72<-9048  ze=6.495<-11567  Statuses=0009 0008
05:08:21 Msec=750  True Az=135.72  Ze=6.495  Az status=0009  Ze status=0008
05:08:22 Check angles
05:08:22 SkyScan query
05:08:22 SkyScan query done: ret=0  az=118.215<-7881  ze=6.495<-11567  Statuses=0009 0008
05:08:22 Msec=1500  True Az=118.215  Ze=6.495  Az status=0009  Ze status=0008
05:08:22 Check angles
05:08:22 SkyScan query
05:08:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:08:23 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:08:23 Message to Master queued w/err=0: serial=345162 error=0
05:08:28 Received message from Master: op=Filter serial=345163
05:08:28 Color wheel filter change from 0 to 0
05:08:28 FLIGetFilterPos err=0  currentPosition=0
05:08:28 FLIGetStepsRemaining err=0  RemainingSteps=0
05:08:28 Filter is already there-color wheel unchanged
05:08:28 Received message from Master: op=Shutter serial=345164
05:08:28 Shutter LASER close
05:08:28 Received message from Camera: op=State serial=345166
05:08:28 GetSingleValue result=40  Value=cccccccc
05:08:28 SkyScan query
05:08:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:08:29 Parameters OK
05:08:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:08:29 Set A/D data flow result=40
05:08:29 Set A/D channel type result=40
05:08:29 Set A/D encoding result=40
05:08:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:08:29 Set channel filter=0.000000e+000  result=40
05:08:29 Config A/D  Result=40
05:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:08:29 Get A/D filter: -9.255963e+061  result=40
05:08:29 Get A/D value=-858993460  result=40
05:08:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:08:29 Parameters OK
05:08:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:08:29 Set A/D data flow result=40
05:08:29 Set A/D channel type result=40
05:08:29 Set A/D encoding result=40
05:08:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:08:29 Set channel filter=0.000000e+000  result=40
05:08:29 Config A/D  Result=40
05:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:08:29 Get A/D filter: -9.255963e+061  result=40
05:08:29 Get A/D value=-858993460  result=40
05:08:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:08:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:08:29 Aux=
05:08:29 Message to Camera, serial 345166 queued
05:09:05 Received message from Master: op=PointingHead serial=345179
05:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:09:05 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:09:06 Point started: ret=0
05:09:06 point_skyscan result=0
05:09:07 Check angles
05:09:07 SkyScan query
05:09:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.565<-13571  Statuses=0008 0009
05:09:07 Msec=0  True Az=112.995  Ze=-23.565  Az status=0008  Ze status=0009
05:09:07 Check angles
05:09:07 SkyScan query
05:09:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.955<-14997  Statuses=0008 0009
05:09:08 Msec=750  True Az=112.995  Ze=-44.955  Az status=0008  Ze status=0009
05:09:08 Check angles
05:09:08 SkyScan query
05:09:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.895<-16393  Statuses=0008 0009
05:09:09 Msec=1500  True Az=112.995  Ze=-65.895  Az status=0008  Ze status=0009
05:09:09 Check angles
05:09:09 SkyScan query
05:09:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.835<-17789  Statuses=0008 0009
05:09:09 Msec=2250  True Az=112.995  Ze=-86.835  Az status=0008  Ze status=0009
05:09:10 Check angles
05:09:10 SkyScan query
05:09:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.805<-19187  Statuses=0008 0009
05:09:10 Msec=3000  True Az=112.995  Ze=-107.805  Az status=0008  Ze status=0009
05:09:10 Check angles
05:09:10 SkyScan query
05:09:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.745<-20583  Statuses=0008 0009
05:09:11 Msec=3750  True Az=112.995  Ze=-128.745  Az status=0008  Ze status=0009
05:09:11 Check angles
05:09:11 SkyScan query
05:09:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
05:09:12 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
05:09:12 Check angles
05:09:12 SkyScan query
05:09:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
05:09:12 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
05:09:13 Check angles
05:09:13 SkyScan query
05:09:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:09:13 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
05:09:13 Message to Master queued w/err=0: serial=345179 error=0
05:09:18 Received message from Master: op=Filter serial=345180
05:09:18 Color wheel filter change from 0 to 0
05:09:18 FLIGetFilterPos err=0  currentPosition=0
05:09:18 FLIGetStepsRemaining err=0  RemainingSteps=0
05:09:18 Filter is already there-color wheel unchanged
05:09:18 Received message from Master: op=Shutter serial=345181
05:09:18 Shutter LASER open
05:09:19 Received message from Camera: op=State serial=345183
05:09:19 GetSingleValue result=40  Value=cccccccc
05:09:19 SkyScan query
05:09:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:09:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:19 Parameters OK
05:09:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:19 Set A/D data flow result=40
05:09:19 Set A/D channel type result=40
05:09:19 Set A/D encoding result=40
05:09:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:19 Set channel filter=0.000000e+000  result=40
05:09:19 Config A/D  Result=40
05:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:19 Get A/D filter: -9.255963e+061  result=40
05:09:19 Get A/D value=-858993460  result=40
05:09:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:19 Parameters OK
05:09:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:19 Set A/D data flow result=40
05:09:19 Set A/D channel type result=40
05:09:19 Set A/D encoding result=40
05:09:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:19 Set channel filter=0.000000e+000  result=40
05:09:19 Config A/D  Result=40
05:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:19 Get A/D filter: -9.255963e+061  result=40
05:09:19 Get A/D value=-858993460  result=40
05:09:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:09:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:09:19 Aux=
05:09:19 Message to Camera, serial 345183 queued
05:09:28 Received message from Master: op=Shutter serial=345193
05:09:28 Shutter LASER close
05:09:28 Received message from Master: op=PointingHead serial=345197
05:09:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:09:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:09:28 Point started: ret=0
05:09:28 point_skyscan result=0
05:09:29 Check angles
05:09:29 SkyScan query
05:09:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
05:09:30 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
05:09:30 Check angles
05:09:30 SkyScan query
05:09:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.58<-20172  Statuses=0008 0009
05:09:30 Msec=750  True Az=112.995  Ze=-122.58  Az status=0008  Ze status=0009
05:09:31 Check angles
05:09:31 SkyScan query
05:09:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.175<-18745  Statuses=0008 0009
05:09:31 Msec=1500  True Az=112.995  Ze=-101.175  Az status=0008  Ze status=0009
05:09:31 Check angles
05:09:31 SkyScan query
05:09:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
05:09:32 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
05:09:32 Check angles
05:09:32 SkyScan query
05:09:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.265<-15951  Statuses=0008 0009
05:09:33 Msec=3000  True Az=112.995  Ze=-59.265  Az status=0008  Ze status=0009
05:09:33 Check angles
05:09:33 SkyScan query
05:09:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.28<-14552  Statuses=0008 0009
05:09:33 Msec=3750  True Az=112.995  Ze=-38.28  Az status=0008  Ze status=0009
05:09:34 Check angles
05:09:34 SkyScan query
05:09:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.34<-13156  Statuses=0008 0009
05:09:34 Msec=4500  True Az=112.995  Ze=-17.34  Az status=0008  Ze status=0009
05:09:34 Check angles
05:09:34 SkyScan query
05:09:35 SkyScan query done: ret=0  az=112.995<-7533  ze=3.63<-11758  Statuses=0008 0009
05:09:35 Msec=5250  True Az=112.995  Ze=3.63  Az status=0008  Ze status=0009
05:09:35 Check angles
05:09:35 SkyScan query
05:09:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:09:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:09:36 Message to Master queued w/err=0: serial=345197 error=0
05:09:41 Received message from Master: op=Filter serial=345198
05:09:41 Color wheel filter change from 0 to 0
05:09:41 FLIGetFilterPos err=0  currentPosition=0
05:09:41 FLIGetStepsRemaining err=0  RemainingSteps=0
05:09:41 Filter is already there-color wheel unchanged
05:09:41 Received message from Master: op=Shutter serial=345199
05:09:41 Shutter LASER close
05:09:41 Received message from Camera: op=State serial=345201
05:09:41 GetSingleValue result=40  Value=cccccccc
05:09:41 SkyScan query
05:09:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:09:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:42 Parameters OK
05:09:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:42 Set A/D data flow result=40
05:09:42 Set A/D channel type result=40
05:09:42 Set A/D encoding result=40
05:09:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:42 Set channel filter=0.000000e+000  result=40
05:09:42 Config A/D  Result=40
05:09:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:42 Get A/D filter: -9.255963e+061  result=40
05:09:42 Get A/D value=-858993460  result=40
05:09:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:42 Parameters OK
05:09:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:42 Set A/D data flow result=40
05:09:42 Set A/D channel type result=40
05:09:42 Set A/D encoding result=40
05:09:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:42 Set channel filter=0.000000e+000  result=40
05:09:42 Config A/D  Result=40
05:09:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:42 Get A/D filter: -9.255963e+061  result=40
05:09:42 Get A/D value=-858993460  result=40
05:09:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:09:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:09:42 Aux=
05:09:42 Message to Camera, serial 345201 queued
05:10:18 Received message from Master: op=PointingHead serial=345214
05:10:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:10:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:10:19 Point started: ret=0
05:10:19 point_skyscan result=0
05:10:20 Check angles
05:10:20 SkyScan query
05:10:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:10:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:10:20 Message to Master queued w/err=0: serial=345214 error=0
05:10:25 Received message from Master: op=Filter serial=345215
05:10:25 Color wheel filter change from 0 to 0
05:10:25 FLIGetFilterPos err=0  currentPosition=0
05:10:25 FLIGetStepsRemaining err=0  RemainingSteps=0
05:10:25 Filter is already there-color wheel unchanged
05:10:25 Received message from Master: op=Shutter serial=345216
05:10:25 Shutter LASER close
05:10:25 Received message from Camera: op=State serial=345218
05:10:25 GetSingleValue result=40  Value=cccccccc
05:10:25 SkyScan query
05:10:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:10:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:10:26 Parameters OK
05:10:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:10:26 Set A/D data flow result=40
05:10:26 Set A/D channel type result=40
05:10:26 Set A/D encoding result=40
05:10:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:10:26 Set channel filter=0.000000e+000  result=40
05:10:26 Config A/D  Result=40
05:10:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:10:26 Get A/D filter: -9.255963e+061  result=40
05:10:26 Get A/D value=-858993460  result=40
05:10:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:10:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:10:26 Parameters OK
05:10:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:10:26 Set A/D data flow result=40
05:10:26 Set A/D channel type result=40
05:10:26 Set A/D encoding result=40
05:10:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:10:26 Set channel filter=0.000000e+000  result=40
05:10:26 Config A/D  Result=40
05:10:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:10:26 Get A/D filter: -9.255963e+061  result=40
05:10:26 Get A/D value=-858993460  result=40
05:10:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:10:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:10:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:10:26 Aux=
05:10:26 Message to Camera, serial 345218 queued
05:11:03 Received message from Master: op=PointingHead serial=345231
05:11:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:11:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:11:03 Point started: ret=0
05:11:03 point_skyscan result=0
05:11:04 Check angles
05:11:04 SkyScan query
05:11:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:11:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:11:04 Message to Master queued w/err=0: serial=345231 error=0
05:11:09 Received message from Master: op=Filter serial=345232
05:11:09 Color wheel filter change from 0 to 0
05:11:09 FLIGetFilterPos err=0  currentPosition=0
05:11:09 FLIGetStepsRemaining err=0  RemainingSteps=0
05:11:09 Filter is already there-color wheel unchanged
05:11:10 Received message from Master: op=Shutter serial=345233
05:11:10 Shutter LASER close
05:11:10 Received message from Camera: op=State serial=345235
05:11:10 GetSingleValue result=40  Value=cccccccc
05:11:10 SkyScan query
05:11:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:11:10 Parameters OK
05:11:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:11:10 Set A/D data flow result=40
05:11:10 Set A/D channel type result=40
05:11:10 Set A/D encoding result=40
05:11:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:11:10 Set channel filter=0.000000e+000  result=40
05:11:10 Config A/D  Result=40
05:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:11:10 Get A/D filter: -9.255963e+061  result=40
05:11:10 Get A/D value=-858993460  result=40
05:11:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:11:10 Parameters OK
05:11:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:11:10 Set A/D data flow result=40
05:11:10 Set A/D channel type result=40
05:11:10 Set A/D encoding result=40
05:11:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:11:10 Set channel filter=0.000000e+000  result=40
05:11:10 Config A/D  Result=40
05:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:11:10 Get A/D filter: -9.255963e+061  result=40
05:11:10 Get A/D value=-858993460  result=40
05:11:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:11:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:11:10 Aux=
05:11:10 Message to Camera, serial 345235 queued
05:11:47 Received message from Master: op=PointingHead serial=345248
05:11:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:11:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:11:47 Point started: ret=0
05:11:47 point_skyscan result=0
05:11:48 Check angles
05:11:48 SkyScan query
05:11:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:11:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:11:49 Message to Master queued w/err=0: serial=345248 error=0
05:11:54 Received message from Master: op=Filter serial=345249
05:11:54 Color wheel filter change from 0 to 0
05:11:54 FLIGetFilterPos err=0  currentPosition=0
05:11:54 FLIGetStepsRemaining err=0  RemainingSteps=0
05:11:54 Filter is already there-color wheel unchanged
05:11:54 Received message from Master: op=Shutter serial=345250
05:11:54 Shutter LASER close
05:11:54 Received message from Camera: op=State serial=345252
05:11:54 GetSingleValue result=40  Value=cccccccc
05:11:54 SkyScan query
05:11:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:11:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:11:55 Parameters OK
05:11:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:11:55 Set A/D data flow result=40
05:11:55 Set A/D channel type result=40
05:11:55 Set A/D encoding result=40
05:11:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:11:55 Set channel filter=0.000000e+000  result=40
05:11:55 Config A/D  Result=40
05:11:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:11:55 Get A/D filter: -9.255963e+061  result=40
05:11:55 Get A/D value=-858993460  result=40
05:11:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:11:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:11:55 Parameters OK
05:11:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:11:55 Set A/D data flow result=40
05:11:55 Set A/D channel type result=40
05:11:55 Set A/D encoding result=40
05:11:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:11:55 Set channel filter=0.000000e+000  result=40
05:11:55 Config A/D  Result=40
05:11:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:11:55 Get A/D filter: -9.255963e+061  result=40
05:11:55 Get A/D value=-858993460  result=40
05:11:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:11:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:11:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:11:55 Aux=
05:11:55 Message to Camera, serial 345252 queued
05:12:31 Received message from Master: op=PointingHead serial=345265
05:12:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:12:31 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:12:32 Point started: ret=0
05:12:32 point_skyscan result=0
05:12:33 Check angles
05:12:33 SkyScan query
05:12:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.715<-13581  Statuses=0008 0009
05:12:33 Msec=0  True Az=112.995  Ze=-23.715  Az status=0008  Ze status=0009
05:12:33 Check angles
05:12:33 SkyScan query
05:12:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.685<-14979  Statuses=0008 0009
05:12:34 Msec=750  True Az=112.995  Ze=-44.685  Az status=0008  Ze status=0009
05:12:34 Check angles
05:12:34 SkyScan query
05:12:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.625<-16375  Statuses=0008 0009
05:12:35 Msec=1500  True Az=112.995  Ze=-65.625  Az status=0008  Ze status=0009
05:12:35 Check angles
05:12:35 SkyScan query
05:12:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.58<-17772  Statuses=0008 0009
05:12:35 Msec=2250  True Az=112.995  Ze=-86.58  Az status=0008  Ze status=0009
05:12:36 Check angles
05:12:36 SkyScan query
05:12:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.535<-19169  Statuses=0008 0009
05:12:36 Msec=3000  True Az=112.995  Ze=-107.535  Az status=0008  Ze status=0009
05:12:36 Check angles
05:12:36 SkyScan query
05:12:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.49<-20566  Statuses=0008 0009
05:12:37 Msec=3750  True Az=112.995  Ze=-128.49  Az status=0008  Ze status=0009
05:12:37 Check angles
05:12:37 SkyScan query
05:12:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.865<-21991  Statuses=0008 0009
05:12:38 Msec=4500  True Az=112.995  Ze=-149.865  Az status=0008  Ze status=0009
05:12:38 Check angles
05:12:38 SkyScan query
05:12:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.76<-23384  Statuses=0008 0009
05:12:38 Msec=5250  True Az=112.995  Ze=-170.76  Az status=0008  Ze status=0009
05:12:39 Check angles
05:12:39 SkyScan query
05:12:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:12:39 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:12:39 Message to Master queued w/err=0: serial=345265 error=0
05:12:44 Received message from Master: op=Filter serial=345266
05:12:44 Color wheel filter change from 0 to 0
05:12:44 FLIGetFilterPos err=0  currentPosition=0
05:12:44 FLIGetStepsRemaining err=0  RemainingSteps=0
05:12:44 Filter is already there-color wheel unchanged
05:12:44 Received message from Master: op=Shutter serial=345267
05:12:44 Shutter LASER open
05:12:44 Received message from Camera: op=State serial=345269
05:12:44 GetSingleValue result=40  Value=cccccccc
05:12:44 SkyScan query
05:12:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:12:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:12:45 Parameters OK
05:12:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:12:45 Set A/D data flow result=40
05:12:45 Set A/D channel type result=40
05:12:45 Set A/D encoding result=40
05:12:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:12:45 Set channel filter=0.000000e+000  result=40
05:12:45 Config A/D  Result=40
05:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:12:45 Get A/D filter: -9.255963e+061  result=40
05:12:45 Get A/D value=-858993460  result=40
05:12:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:12:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:12:45 Parameters OK
05:12:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:12:45 Set A/D data flow result=40
05:12:45 Set A/D channel type result=40
05:12:45 Set A/D encoding result=40
05:12:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:12:45 Set channel filter=0.000000e+000  result=40
05:12:45 Config A/D  Result=40
05:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:12:45 Get A/D filter: -9.255963e+061  result=40
05:12:45 Get A/D value=-858993460  result=40
05:12:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:12:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:12:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:12:45 Aux=
05:12:45 Message to Camera, serial 345269 queued
05:12:53 Received message from Master: op=Shutter serial=345279
05:12:53 Shutter LASER close
05:12:54 Received message from Master: op=PointingHead serial=345283
05:12:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:12:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:12:54 Point started: ret=0
05:12:54 point_skyscan result=0
05:12:55 Check angles
05:12:55 SkyScan query
05:12:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.16<-21544  Statuses=0008 0009
05:12:56 Msec=0  True Az=112.995  Ze=-143.16  Az status=0008  Ze status=0009
05:12:56 Check angles
05:12:56 SkyScan query
05:12:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
05:12:56 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
05:12:57 Check angles
05:12:57 SkyScan query
05:12:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.28<-18752  Statuses=0008 0009
05:12:57 Msec=1500  True Az=112.995  Ze=-101.28  Az status=0008  Ze status=0009
05:12:57 Check angles
05:12:57 SkyScan query
05:12:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
05:12:58 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
05:12:58 Check angles
05:12:58 SkyScan query
05:12:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
05:12:59 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
05:12:59 Check angles
05:12:59 SkyScan query
05:12:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
05:12:59 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
05:13:00 Check angles
05:13:00 SkyScan query
05:13:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.445<-13163  Statuses=0008 0009
05:13:00 Msec=4500  True Az=112.995  Ze=-17.445  Az status=0008  Ze status=0009
05:13:00 Check angles
05:13:00 SkyScan query
05:13:01 SkyScan query done: ret=0  az=112.995<-7533  ze=3.525<-11765  Statuses=0008 0009
05:13:01 Msec=5250  True Az=112.995  Ze=3.525  Az status=0008  Ze status=0009
05:13:01 Check angles
05:13:01 SkyScan query
05:13:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:13:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:13:02 Message to Master queued w/err=0: serial=345283 error=0
05:13:07 Received message from Master: op=Filter serial=345284
05:13:07 Color wheel filter change from 0 to 0
05:13:07 FLIGetFilterPos err=0  currentPosition=0
05:13:07 FLIGetStepsRemaining err=0  RemainingSteps=0
05:13:07 Filter is already there-color wheel unchanged
05:13:07 Received message from Master: op=Shutter serial=345285
05:13:07 Shutter LASER close
05:13:07 Received message from Camera: op=State serial=345287
05:13:07 GetSingleValue result=40  Value=cccccccc
05:13:07 SkyScan query
05:13:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:13:08 Parameters OK
05:13:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:13:08 Set A/D data flow result=40
05:13:08 Set A/D channel type result=40
05:13:08 Set A/D encoding result=40
05:13:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:13:08 Set channel filter=0.000000e+000  result=40
05:13:08 Config A/D  Result=40
05:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:13:08 Get A/D filter: -9.255963e+061  result=40
05:13:08 Get A/D value=-858993460  result=40
05:13:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:13:08 Parameters OK
05:13:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:13:08 Set A/D data flow result=40
05:13:08 Set A/D channel type result=40
05:13:08 Set A/D encoding result=40
05:13:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:13:08 Set channel filter=0.000000e+000  result=40
05:13:08 Config A/D  Result=40
05:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:13:08 Get A/D filter: -9.255963e+061  result=40
05:13:08 Get A/D value=-858993460  result=40
05:13:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:13:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:13:08 Aux=
05:13:08 Message to Camera, serial 345287 queued
05:13:45 Received message from Master: op=PointingHead serial=345300
05:13:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:13:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:13:45 Point started: ret=0
05:13:45 point_skyscan result=0
05:13:46 Check angles
05:13:46 SkyScan query
05:13:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:13:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:13:46 Message to Master queued w/err=0: serial=345300 error=0
05:13:51 Received message from Master: op=Filter serial=345301
05:13:51 Color wheel filter change from 0 to 0
05:13:51 FLIGetFilterPos err=0  currentPosition=0
05:13:51 FLIGetStepsRemaining err=0  RemainingSteps=0
05:13:51 Filter is already there-color wheel unchanged
05:13:51 Received message from Master: op=Shutter serial=345302
05:13:51 Shutter LASER close
05:13:51 Received message from Camera: op=State serial=345304
05:13:51 GetSingleValue result=40  Value=cccccccc
05:13:51 SkyScan query
05:13:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:13:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:13:52 Parameters OK
05:13:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:13:52 Set A/D data flow result=40
05:13:52 Set A/D channel type result=40
05:13:52 Set A/D encoding result=40
05:13:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:13:52 Set channel filter=0.000000e+000  result=40
05:13:52 Config A/D  Result=40
05:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:13:52 Get A/D filter: -9.255963e+061  result=40
05:13:52 Get A/D value=-858993460  result=40
05:13:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:13:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:13:52 Parameters OK
05:13:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:13:52 Set A/D data flow result=40
05:13:52 Set A/D channel type result=40
05:13:52 Set A/D encoding result=40
05:13:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:13:52 Set channel filter=0.000000e+000  result=40
05:13:52 Config A/D  Result=40
05:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:13:52 Get A/D filter: -9.255963e+061  result=40
05:13:52 Get A/D value=-858993460  result=40
05:13:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:13:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:13:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:13:52 Aux=
05:13:52 Message to Camera, serial 345304 queued
05:14:29 Received message from Master: op=PointingHead serial=345317
05:14:29 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:14:29 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:14:29 Point started: ret=0
05:14:29 point_skyscan result=0
05:14:30 Check angles
05:14:30 SkyScan query
05:14:30 SkyScan query done: ret=0  az=136.515<-9101  ze=-6.51<-12434  Statuses=0009 0008
05:14:30 Msec=0  True Az=136.515  Ze=-6.51  Az status=0009  Ze status=0008
05:14:31 Check angles
05:14:31 SkyScan query
05:14:31 SkyScan query done: ret=0  az=154.065<-10271  ze=-6.495<-12433  Statuses=0009 0008
[UTC 2019-3-19  05:14:31]
05:14:31 Msec=750  True Az=154.065  Ze=-6.495  Az status=0009  Ze status=0008
05:14:31 Check angles
05:14:31 SkyScan query
05:14:32 SkyScan query done: ret=0  az=171.45<-11430  ze=-6.495<-12433  Statuses=0009 0008
05:14:32 Msec=1500  True Az=171.45  Ze=-6.495  Az status=0009  Ze status=0008
05:14:32 Check angles
05:14:32 SkyScan query
05:14:33 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:14:33 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:14:33 Message to Master queued w/err=0: serial=345317 error=0
05:14:38 Received message from Master: op=Filter serial=345318
05:14:38 Color wheel filter change from 0 to 0
05:14:38 FLIGetFilterPos err=0  currentPosition=0
05:14:38 FLIGetStepsRemaining err=0  RemainingSteps=0
05:14:38 Filter is already there-color wheel unchanged
05:14:38 Received message from Master: op=Shutter serial=345319
05:14:38 Shutter LASER close
05:14:38 Received message from Camera: op=State serial=345321
05:14:38 GetSingleValue result=40  Value=cccccccc
05:14:38 SkyScan query
05:14:39 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:14:39 Parameters OK
05:14:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:14:39 Set A/D data flow result=40
05:14:39 Set A/D channel type result=40
05:14:39 Set A/D encoding result=40
05:14:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:14:39 Set channel filter=0.000000e+000  result=40
05:14:39 Config A/D  Result=40
05:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:14:39 Get A/D filter: -9.255963e+061  result=40
05:14:39 Get A/D value=-858993460  result=40
05:14:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:14:39 Parameters OK
05:14:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:14:39 Set A/D data flow result=40
05:14:39 Set A/D channel type result=40
05:14:39 Set A/D encoding result=40
05:14:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:14:39 Set channel filter=0.000000e+000  result=40
05:14:39 Config A/D  Result=40
05:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:14:39 Get A/D filter: -9.255963e+061  result=40
05:14:39 Get A/D value=-858993460  result=40
05:14:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:14:39 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:14:39 Aux=
05:14:39 Message to Camera, serial 345321 queued
05:15:15 Received message from Master: op=PointingHead serial=345334
05:15:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:15:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:15:16 Point started: ret=0
05:15:16 point_skyscan result=0
05:15:17 Check angles
05:15:17 SkyScan query
05:15:17 SkyScan query done: ret=0  az=152.955<-10197  ze=6.51<-11566  Statuses=0009 0008
05:15:17 Msec=0  True Az=152.955  Ze=6.51  Az status=0009  Ze status=0008
05:15:17 Check angles
05:15:17 SkyScan query
05:15:18 SkyScan query done: ret=0  az=135.525<-9035  ze=6.495<-11567  Statuses=0009 0008
05:15:18 Msec=750  True Az=135.525  Ze=6.495  Az status=0009  Ze status=0008
05:15:18 Check angles
05:15:18 SkyScan query
05:15:19 SkyScan query done: ret=0  az=118.08<-7872  ze=6.495<-11567  Statuses=0009 0008
05:15:19 Msec=1500  True Az=118.08  Ze=6.495  Az status=0009  Ze status=0008
05:15:19 Check angles
05:15:19 SkyScan query
05:15:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:15:19 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:15:19 Message to Master queued w/err=0: serial=345334 error=0
05:15:24 Received message from Master: op=Filter serial=345335
05:15:24 Color wheel filter change from 0 to 0
05:15:24 FLIGetFilterPos err=0  currentPosition=0
05:15:24 FLIGetStepsRemaining err=0  RemainingSteps=0
05:15:24 Filter is already there-color wheel unchanged
05:15:25 Received message from Master: op=Shutter serial=345336
05:15:25 Shutter LASER close
05:15:25 Received message from Camera: op=State serial=345338
05:15:25 GetSingleValue result=40  Value=cccccccc
05:15:25 SkyScan query
05:15:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:15:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:15:25 Parameters OK
05:15:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:15:25 Set A/D data flow result=40
05:15:25 Set A/D channel type result=40
05:15:25 Set A/D encoding result=40
05:15:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:15:25 Set channel filter=0.000000e+000  result=40
05:15:25 Config A/D  Result=40
05:15:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:15:25 Get A/D filter: -9.255963e+061  result=40
05:15:25 Get A/D value=-858993460  result=40
05:15:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:15:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:15:25 Parameters OK
05:15:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:15:25 Set A/D data flow result=40
05:15:25 Set A/D channel type result=40
05:15:25 Set A/D encoding result=40
05:15:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:15:25 Set channel filter=0.000000e+000  result=40
05:15:25 Config A/D  Result=40
05:15:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:15:25 Get A/D filter: -9.255963e+061  result=40
05:15:25 Get A/D value=-858993460  result=40
05:15:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:15:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:15:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:15:25 Aux=
05:15:25 Message to Camera, serial 345338 queued
05:16:02 Received message from Master: op=PointingHead serial=345351
05:16:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:16:02 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:16:02 Point started: ret=0
05:16:02 point_skyscan result=0
05:16:03 Check angles
05:16:03 SkyScan query
05:16:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.085<-13539  Statuses=0008 0009
05:16:04 Msec=0  True Az=112.995  Ze=-23.085  Az status=0008  Ze status=0009
05:16:04 Check angles
05:16:04 SkyScan query
05:16:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
05:16:04 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
05:16:05 Check angles
05:16:05 SkyScan query
05:16:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.85<-16390  Statuses=0008 0009
05:16:05 Msec=1500  True Az=112.995  Ze=-65.85  Az status=0008  Ze status=0009
05:16:05 Check angles
05:16:05 SkyScan query
05:16:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.835<-17789  Statuses=0008 0009
05:16:06 Msec=2250  True Az=112.995  Ze=-86.835  Az status=0008  Ze status=0009
05:16:06 Check angles
05:16:06 SkyScan query
05:16:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.775<-19185  Statuses=0008 0009
05:16:07 Msec=3000  True Az=112.995  Ze=-107.775  Az status=0008  Ze status=0009
05:16:07 Check angles
05:16:07 SkyScan query
05:16:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.715<-20581  Statuses=0008 0009
05:16:07 Msec=3750  True Az=112.995  Ze=-128.715  Az status=0008  Ze status=0009
05:16:08 Check angles
05:16:08 SkyScan query
05:16:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.685<-21979  Statuses=0008 0009
05:16:08 Msec=4500  True Az=112.995  Ze=-149.685  Az status=0008  Ze status=0009
05:16:08 Check angles
05:16:08 SkyScan query
05:16:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.955<-23397  Statuses=0008 0009
05:16:09 Msec=5250  True Az=112.995  Ze=-170.955  Az status=0008  Ze status=0009
05:16:09 Check angles
05:16:09 SkyScan query
05:16:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:16:10 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:16:10 Message to Master queued w/err=0: serial=345351 error=0
05:16:15 Received message from Master: op=Filter serial=345352
05:16:15 Color wheel filter change from 0 to 0
05:16:15 FLIGetFilterPos err=0  currentPosition=0
05:16:15 FLIGetStepsRemaining err=0  RemainingSteps=0
05:16:15 Filter is already there-color wheel unchanged
05:16:15 Received message from Master: op=Shutter serial=345353
05:16:15 Shutter LASER open
05:16:15 Received message from Camera: op=State serial=345355
05:16:15 GetSingleValue result=40  Value=cccccccc
05:16:15 SkyScan query
05:16:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:16 Parameters OK
05:16:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:16 Set A/D data flow result=40
05:16:16 Set A/D channel type result=40
05:16:16 Set A/D encoding result=40
05:16:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:16 Set channel filter=0.000000e+000  result=40
05:16:16 Config A/D  Result=40
05:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:16 Get A/D filter: -9.255963e+061  result=40
05:16:16 Get A/D value=-858993460  result=40
05:16:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:16 Parameters OK
05:16:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:16 Set A/D data flow result=40
05:16:16 Set A/D channel type result=40
05:16:16 Set A/D encoding result=40
05:16:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:16 Set channel filter=0.000000e+000  result=40
05:16:16 Config A/D  Result=40
05:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:16 Get A/D filter: -9.255963e+061  result=40
05:16:16 Get A/D value=-858993460  result=40
05:16:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:16:16 Aux=
05:16:16 Message to Camera, serial 345355 queued
05:16:24 Received message from Master: op=Shutter serial=345365
05:16:24 Shutter LASER close
05:16:24 Received message from Master: op=PointingHead serial=345369
05:16:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:16:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:16:25 Point started: ret=0
05:16:25 point_skyscan result=0
05:16:26 Check angles
05:16:26 SkyScan query
05:16:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
05:16:26 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
05:16:26 Check angles
05:16:26 SkyScan query
05:16:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.28<-20152  Statuses=0008 0009
05:16:27 Msec=750  True Az=112.995  Ze=-122.28  Az status=0008  Ze status=0009
05:16:27 Check angles
05:16:27 SkyScan query
05:16:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
05:16:28 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
05:16:28 Check angles
05:16:28 SkyScan query
05:16:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.355<-17357  Statuses=0008 0009
05:16:28 Msec=2250  True Az=112.995  Ze=-80.355  Az status=0008  Ze status=0009
05:16:29 Check angles
05:16:29 SkyScan query
05:16:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.415<-15961  Statuses=0008 0009
05:16:29 Msec=3000  True Az=112.995  Ze=-59.415  Az status=0008  Ze status=0009
05:16:29 Check angles
05:16:29 SkyScan query
05:16:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.43<-14562  Statuses=0008 0009
05:16:30 Msec=3750  True Az=112.995  Ze=-38.43  Az status=0008  Ze status=0009
05:16:30 Check angles
05:16:30 SkyScan query
05:16:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.505<-13167  Statuses=0008 0009
05:16:31 Msec=4500  True Az=112.995  Ze=-17.505  Az status=0008  Ze status=0009
05:16:31 Check angles
05:16:31 SkyScan query
05:16:31 SkyScan query done: ret=0  az=112.995<-7533  ze=3.48<-11768  Statuses=0008 0009
05:16:31 Msec=5250  True Az=112.995  Ze=3.48  Az status=0008  Ze status=0009
05:16:32 Check angles
05:16:32 SkyScan query
05:16:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:16:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:16:32 Message to Master queued w/err=0: serial=345369 error=0
05:16:37 Received message from Master: op=Filter serial=345370
05:16:37 Color wheel filter change from 0 to 0
05:16:37 FLIGetFilterPos err=0  currentPosition=0
05:16:37 FLIGetStepsRemaining err=0  RemainingSteps=0
05:16:37 Filter is already there-color wheel unchanged
05:16:37 Received message from Master: op=Shutter serial=345371
05:16:37 Shutter LASER close
05:16:37 Received message from Camera: op=State serial=345373
05:16:37 GetSingleValue result=40  Value=cccccccc
05:16:37 SkyScan query
05:16:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:16:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:38 Parameters OK
05:16:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:38 Set A/D data flow result=40
05:16:38 Set A/D channel type result=40
05:16:38 Set A/D encoding result=40
05:16:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:38 Set channel filter=0.000000e+000  result=40
05:16:38 Config A/D  Result=40
05:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:38 Get A/D filter: -9.255963e+061  result=40
05:16:38 Get A/D value=-858993460  result=40
05:16:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:38 Parameters OK
05:16:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:38 Set A/D data flow result=40
05:16:38 Set A/D channel type result=40
05:16:38 Set A/D encoding result=40
05:16:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:38 Set channel filter=0.000000e+000  result=40
05:16:38 Config A/D  Result=40
05:16:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:38 Get A/D filter: -9.255963e+061  result=40
05:16:38 Get A/D value=-858993460  result=40
05:16:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:16:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:16:38 Aux=
05:16:38 Message to Camera, serial 345373 queued
05:17:15 Received message from Master: op=PointingHead serial=345386
05:17:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:17:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:17:15 Point started: ret=0
05:17:15 point_skyscan result=0
05:17:16 Check angles
05:17:16 SkyScan query
05:17:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:17:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:17:17 Message to Master queued w/err=0: serial=345386 error=0
05:17:22 Received message from Master: op=Filter serial=345387
05:17:22 Color wheel filter change from 0 to 0
05:17:22 FLIGetFilterPos err=0  currentPosition=0
05:17:22 FLIGetStepsRemaining err=0  RemainingSteps=0
05:17:22 Filter is already there-color wheel unchanged
05:17:22 Received message from Master: op=Shutter serial=345388
05:17:22 Shutter LASER close
05:17:22 Received message from Camera: op=State serial=345390
05:17:22 GetSingleValue result=40  Value=cccccccc
05:17:22 SkyScan query
05:17:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:17:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:17:22 Parameters OK
05:17:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:17:22 Set A/D data flow result=40
05:17:22 Set A/D channel type result=40
05:17:22 Set A/D encoding result=40
05:17:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:17:22 Set channel filter=0.000000e+000  result=40
05:17:22 Config A/D  Result=40
05:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:17:22 Get A/D filter: -9.255963e+061  result=40
05:17:22 Get A/D value=-858993460  result=40
05:17:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:17:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:17:22 Parameters OK
05:17:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:17:22 Set A/D data flow result=40
05:17:22 Set A/D channel type result=40
05:17:22 Set A/D encoding result=40
05:17:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:17:22 Set channel filter=0.000000e+000  result=40
05:17:22 Config A/D  Result=40
05:17:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:17:22 Get A/D filter: -9.255963e+061  result=40
05:17:22 Get A/D value=-858993460  result=40
05:17:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:17:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:17:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:17:22 Aux=
05:17:22 Message to Camera, serial 345390 queued
05:17:59 Received message from Master: op=PointingHead serial=345403
05:17:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:17:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:17:59 Point started: ret=0
05:17:59 point_skyscan result=0
05:18:00 Check angles
05:18:00 SkyScan query
05:18:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:18:01 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:18:01 Message to Master queued w/err=0: serial=345403 error=0
05:18:06 Received message from Master: op=Filter serial=345404
05:18:06 Color wheel filter change from 0 to 0
05:18:06 FLIGetFilterPos err=0  currentPosition=0
05:18:06 FLIGetStepsRemaining err=0  RemainingSteps=0
05:18:06 Filter is already there-color wheel unchanged
05:18:06 Received message from Master: op=Shutter serial=345405
05:18:06 Shutter LASER close
05:18:06 Received message from Camera: op=State serial=345407
05:18:06 GetSingleValue result=40  Value=cccccccc
05:18:06 SkyScan query
05:18:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:18:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:18:07 Parameters OK
05:18:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:18:07 Set A/D data flow result=40
05:18:07 Set A/D channel type result=40
05:18:07 Set A/D encoding result=40
05:18:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:18:07 Set channel filter=0.000000e+000  result=40
05:18:07 Config A/D  Result=40
05:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:18:07 Get A/D filter: -9.255963e+061  result=40
05:18:07 Get A/D value=-858993460  result=40
05:18:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:18:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:18:07 Parameters OK
05:18:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:18:07 Set A/D data flow result=40
05:18:07 Set A/D channel type result=40
05:18:07 Set A/D encoding result=40
05:18:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:18:07 Set channel filter=0.000000e+000  result=40
05:18:07 Config A/D  Result=40
05:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:18:07 Get A/D filter: -9.255963e+061  result=40
05:18:07 Get A/D value=-858993460  result=40
05:18:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:18:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:18:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:18:07 Aux=
05:18:07 Message to Camera, serial 345407 queued
05:18:43 Received message from Master: op=PointingHead serial=345420
05:18:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:18:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:18:44 Point started: ret=0
05:18:44 point_skyscan result=0
05:18:45 Check angles
05:18:45 SkyScan query
05:18:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:18:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:18:45 Message to Master queued w/err=0: serial=345420 error=0
05:18:50 Received message from Master: op=Filter serial=345421
05:18:50 Color wheel filter change from 0 to 0
05:18:50 FLIGetFilterPos err=0  currentPosition=0
05:18:50 FLIGetStepsRemaining err=0  RemainingSteps=0
05:18:50 Filter is already there-color wheel unchanged
05:18:50 Received message from Master: op=Shutter serial=345422
05:18:50 Shutter LASER close
05:18:50 Received message from Camera: op=State serial=345424
05:18:50 GetSingleValue result=40  Value=cccccccc
05:18:50 SkyScan query
05:18:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:18:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:18:51 Parameters OK
05:18:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:18:51 Set A/D data flow result=40
05:18:51 Set A/D channel type result=40
05:18:51 Set A/D encoding result=40
05:18:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:18:51 Set channel filter=0.000000e+000  result=40
05:18:51 Config A/D  Result=40
05:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:18:51 Get A/D filter: -9.255963e+061  result=40
05:18:51 Get A/D value=-858993460  result=40
05:18:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:18:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:18:51 Parameters OK
05:18:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:18:51 Set A/D data flow result=40
05:18:51 Set A/D channel type result=40
05:18:51 Set A/D encoding result=40
05:18:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:18:51 Set channel filter=0.000000e+000  result=40
05:18:51 Config A/D  Result=40
05:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:18:51 Get A/D filter: -9.255963e+061  result=40
05:18:51 Get A/D value=-858993460  result=40
05:18:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:18:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:18:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:18:51 Aux=
05:18:51 Message to Camera, serial 345424 queued
05:19:28 Received message from Master: op=PointingHead serial=345437
05:19:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:19:28 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:19:28 Point started: ret=0
05:19:28 point_skyscan result=0
05:19:29 Check angles
05:19:29 SkyScan query
05:19:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
05:19:29 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
05:19:30 Check angles
05:19:30 SkyScan query
05:19:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.55<-14970  Statuses=0008 0009
05:19:30 Msec=750  True Az=112.995  Ze=-44.55  Az status=0008  Ze status=0009
05:19:30 Check angles
05:19:30 SkyScan query
05:19:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.49<-16366  Statuses=0008 0009
05:19:31 Msec=1500  True Az=112.995  Ze=-65.49  Az status=0008  Ze status=0009
05:19:31 Check angles
05:19:31 SkyScan query
05:19:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.445<-17763  Statuses=0008 0009
05:19:32 Msec=2250  True Az=112.995  Ze=-86.445  Az status=0008  Ze status=0009
05:19:32 Check angles
05:19:32 SkyScan query
05:19:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.835<-19189  Statuses=0008 0009
05:19:32 Msec=3000  True Az=112.995  Ze=-107.835  Az status=0008  Ze status=0009
05:19:33 Check angles
05:19:33 SkyScan query
05:19:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.225<-20615  Statuses=0008 0009
05:19:33 Msec=3750  True Az=112.995  Ze=-129.225  Az status=0008  Ze status=0009
05:19:33 Check angles
05:19:33 SkyScan query
05:19:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.18<-22012  Statuses=0008 0009
05:19:34 Msec=4500  True Az=112.995  Ze=-150.18  Az status=0008  Ze status=0009
05:19:34 Check angles
05:19:34 SkyScan query
05:19:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-171<-23400  Statuses=0008 0009
05:19:35 Msec=5250  True Az=112.995  Ze=-171  Az status=0008  Ze status=0009
05:19:35 Check angles
05:19:35 SkyScan query
05:19:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:19:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:19:35 Message to Master queued w/err=0: serial=345437 error=0
05:19:40 Received message from Master: op=Filter serial=345438
05:19:40 Color wheel filter change from 0 to 0
05:19:40 FLIGetFilterPos err=0  currentPosition=0
05:19:40 FLIGetStepsRemaining err=0  RemainingSteps=0
05:19:40 Filter is already there-color wheel unchanged
05:19:41 Received message from Master: op=Shutter serial=345439
05:19:41 Shutter LASER open
05:19:41 Received message from Camera: op=State serial=345441
05:19:41 GetSingleValue result=40  Value=cccccccc
05:19:41 SkyScan query
05:19:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:19:41 Parameters OK
05:19:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:19:41 Set A/D data flow result=40
05:19:41 Set A/D channel type result=40
05:19:41 Set A/D encoding result=40
05:19:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:19:41 Set channel filter=0.000000e+000  result=40
05:19:41 Config A/D  Result=40
05:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:19:41 Get A/D filter: -9.255963e+061  result=40
05:19:41 Get A/D value=-858993460  result=40
05:19:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:19:41 Parameters OK
05:19:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:19:41 Set A/D data flow result=40
05:19:41 Set A/D channel type result=40
05:19:41 Set A/D encoding result=40
05:19:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:19:41 Set channel filter=0.000000e+000  result=40
05:19:41 Config A/D  Result=40
05:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:19:41 Get A/D filter: -9.255963e+061  result=40
05:19:41 Get A/D value=-858993460  result=40
05:19:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:19:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:19:41 Aux=
05:19:41 Message to Camera, serial 345441 queued
05:19:50 Received message from Master: op=Shutter serial=345451
05:19:50 Shutter LASER close
05:19:51 Received message from Master: op=PointingHead serial=345455
05:19:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:19:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:19:51 Point started: ret=0
05:19:51 point_skyscan result=0
05:19:52 Check angles
05:19:52 SkyScan query
05:19:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
05:19:52 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
05:19:52 Check angles
05:19:52 SkyScan query
05:19:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.25<-20150  Statuses=0008 0009
05:19:53 Msec=750  True Az=112.995  Ze=-122.25  Az status=0008  Ze status=0009
05:19:53 Check angles
05:19:53 SkyScan query
05:19:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
05:19:54 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
05:19:54 Check angles
05:19:54 SkyScan query
05:19:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
05:19:54 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
05:19:55 Check angles
05:19:55 SkyScan query
05:19:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.485<-15899  Statuses=0008 0009
05:19:55 Msec=3000  True Az=112.995  Ze=-58.485  Az status=0008  Ze status=0009
05:19:55 Check angles
05:19:55 SkyScan query
05:19:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
05:19:56 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
05:19:56 Check angles
05:19:56 SkyScan query
05:19:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.59<-13106  Statuses=0008 0009
05:19:57 Msec=4500  True Az=112.995  Ze=-16.59  Az status=0008  Ze status=0009
05:19:57 Check angles
05:19:57 SkyScan query
05:19:57 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
05:19:57 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
05:19:58 Check angles
05:19:58 SkyScan query
05:19:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:19:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:19:58 Message to Master queued w/err=0: serial=345455 error=0
05:20:03 Received message from Master: op=Filter serial=345456
05:20:03 Color wheel filter change from 0 to 0
05:20:03 FLIGetFilterPos err=0  currentPosition=0
05:20:03 FLIGetStepsRemaining err=0  RemainingSteps=0
05:20:03 Filter is already there-color wheel unchanged
05:20:03 Received message from Master: op=Shutter serial=345457
05:20:03 Shutter LASER close
05:20:04 Received message from Camera: op=State serial=345459
05:20:04 GetSingleValue result=40  Value=cccccccc
05:20:04 SkyScan query
05:20:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:20:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:20:04 Parameters OK
05:20:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:20:04 Set A/D data flow result=40
05:20:04 Set A/D channel type result=40
05:20:04 Set A/D encoding result=40
05:20:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:20:04 Set channel filter=0.000000e+000  result=40
05:20:04 Config A/D  Result=40
05:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:20:04 Get A/D filter: -9.255963e+061  result=40
05:20:04 Get A/D value=-858993460  result=40
05:20:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:20:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:20:04 Parameters OK
05:20:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:20:04 Set A/D data flow result=40
05:20:04 Set A/D channel type result=40
05:20:04 Set A/D encoding result=40
05:20:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:20:04 Set channel filter=0.000000e+000  result=40
05:20:04 Config A/D  Result=40
05:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:20:04 Get A/D filter: -9.255963e+061  result=40
05:20:04 Get A/D value=-858993460  result=40
05:20:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:20:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:20:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:20:04 Aux=
05:20:04 Message to Camera, serial 345459 queued
05:20:41 Received message from Master: op=PointingHead serial=345472
05:20:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:20:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:20:41 Point started: ret=0
05:20:41 point_skyscan result=0
05:20:42 Check angles
05:20:42 SkyScan query
05:20:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:20:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:20:43 Message to Master queued w/err=0: serial=345472 error=0
05:20:48 Received message from Master: op=Filter serial=345473
05:20:48 Color wheel filter change from 0 to 0
05:20:48 FLIGetFilterPos err=0  currentPosition=0
05:20:48 FLIGetStepsRemaining err=0  RemainingSteps=0
05:20:48 Filter is already there-color wheel unchanged
05:20:48 Received message from Master: op=Shutter serial=345474
05:20:48 Shutter LASER close
05:20:48 Received message from Camera: op=State serial=345476
05:20:48 GetSingleValue result=40  Value=cccccccc
05:20:48 SkyScan query
05:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:20:48 Parameters OK
05:20:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:20:48 Set A/D data flow result=40
05:20:48 Set A/D channel type result=40
05:20:48 Set A/D encoding result=40
05:20:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:20:48 Set channel filter=0.000000e+000  result=40
05:20:48 Config A/D  Result=40
05:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:20:48 Get A/D filter: -9.255963e+061  result=40
05:20:48 Get A/D value=-858993460  result=40
05:20:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:20:48 Parameters OK
05:20:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:20:48 Set A/D data flow result=40
05:20:48 Set A/D channel type result=40
05:20:48 Set A/D encoding result=40
05:20:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:20:48 Set channel filter=0.000000e+000  result=40
05:20:48 Config A/D  Result=40
05:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:20:48 Get A/D filter: -9.255963e+061  result=40
05:20:48 Get A/D value=-858993460  result=40
05:20:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:20:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:20:48 Aux=
05:20:48 Message to Camera, serial 345476 queued
05:21:25 Received message from Master: op=PointingHead serial=345489
05:21:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:21:25 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:21:26 Point started: ret=0
05:21:26 point_skyscan result=0
05:21:26 Check angles
05:21:26 SkyScan query
05:21:27 SkyScan query done: ret=0  az=136.32<-9088  ze=-6.51<-12434  Statuses=0009 0008
05:21:27 Msec=0  True Az=136.32  Ze=-6.51  Az status=0009  Ze status=0008
05:21:27 Check angles
05:21:27 SkyScan query
05:21:28 SkyScan query done: ret=0  az=153.75<-10250  ze=-6.495<-12433  Statuses=0009 0008
05:21:28 Msec=750  True Az=153.75  Ze=-6.495  Az status=0009  Ze status=0008
05:21:28 Check angles
05:21:28 SkyScan query
05:21:28 SkyScan query done: ret=0  az=171.645<-11443  ze=-6.495<-12433  Statuses=0009 0008
05:21:28 Msec=1500  True Az=171.645  Ze=-6.495  Az status=0009  Ze status=0008
05:21:29 Check angles
05:21:29 SkyScan query
05:21:29 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:21:29 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:21:29 Message to Master queued w/err=0: serial=345489 error=0
05:21:34 Received message from Master: op=Filter serial=345490
05:21:34 Color wheel filter change from 0 to 0
05:21:34 FLIGetFilterPos err=0  currentPosition=0
05:21:34 FLIGetStepsRemaining err=0  RemainingSteps=0
05:21:34 Filter is already there-color wheel unchanged
05:21:34 Received message from Master: op=Shutter serial=345491
05:21:34 Shutter LASER close
05:21:34 Received message from Camera: op=State serial=345493
05:21:34 GetSingleValue result=40  Value=cccccccc
05:21:34 SkyScan query
05:21:35 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:21:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:21:35 Parameters OK
05:21:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:21:35 Set A/D data flow result=40
05:21:35 Set A/D channel type result=40
05:21:35 Set A/D encoding result=40
05:21:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:21:35 Set channel filter=0.000000e+000  result=40
05:21:35 Config A/D  Result=40
05:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:21:35 Get A/D filter: -9.255963e+061  result=40
05:21:35 Get A/D value=-858993460  result=40
05:21:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:21:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:21:35 Parameters OK
05:21:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:21:35 Set A/D data flow result=40
05:21:35 Set A/D channel type result=40
05:21:35 Set A/D encoding result=40
05:21:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:21:35 Set channel filter=0.000000e+000  result=40
05:21:35 Config A/D  Result=40
05:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:21:35 Get A/D filter: -9.255963e+061  result=40
05:21:35 Get A/D value=-858993460  result=40
05:21:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:21:35 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:21:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:21:35 Aux=
05:21:35 Message to Camera, serial 345493 queued
05:22:12 Received message from Master: op=PointingHead serial=345506
05:22:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:22:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:22:12 Point started: ret=0
05:22:12 point_skyscan result=0
05:22:13 Check angles
05:22:13 SkyScan query
05:22:13 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
05:22:13 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
05:22:14 Check angles
05:22:14 SkyScan query
05:22:14 SkyScan query done: ret=0  az=135.27<-9018  ze=6.495<-11567  Statuses=0009 0008
05:22:14 Msec=750  True Az=135.27  Ze=6.495  Az status=0009  Ze status=0008
05:22:14 Check angles
05:22:14 SkyScan query
05:22:15 SkyScan query done: ret=0  az=117.855<-7857  ze=6.495<-11567  Statuses=0009 0008
05:22:15 Msec=1500  True Az=117.855  Ze=6.495  Az status=0009  Ze status=0008
05:22:15 Check angles
05:22:15 SkyScan query
05:22:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:22:16 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:22:16 Message to Master queued w/err=0: serial=345506 error=0
05:22:21 Received message from Master: op=Filter serial=345507
05:22:21 Color wheel filter change from 0 to 0
05:22:21 FLIGetFilterPos err=0  currentPosition=0
05:22:21 FLIGetStepsRemaining err=0  RemainingSteps=0
05:22:21 Filter is already there-color wheel unchanged
05:22:21 Received message from Master: op=Shutter serial=345508
05:22:21 Shutter LASER close
05:22:21 Received message from Camera: op=State serial=345510
05:22:21 GetSingleValue result=40  Value=cccccccc
05:22:21 SkyScan query
05:22:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:22:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:22:22 Parameters OK
05:22:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:22:22 Set A/D data flow result=40
05:22:22 Set A/D channel type result=40
05:22:22 Set A/D encoding result=40
05:22:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:22:22 Set channel filter=0.000000e+000  result=40
05:22:22 Config A/D  Result=40
05:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:22:22 Get A/D filter: -9.255963e+061  result=40
05:22:22 Get A/D value=-858993460  result=40
05:22:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:22:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:22:22 Parameters OK
05:22:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:22:22 Set A/D data flow result=40
05:22:22 Set A/D channel type result=40
05:22:22 Set A/D encoding result=40
05:22:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:22:22 Set channel filter=0.000000e+000  result=40
05:22:22 Config A/D  Result=40
05:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:22:22 Get A/D filter: -9.255963e+061  result=40
05:22:22 Get A/D value=-858993460  result=40
05:22:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:22:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:22:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:22:22 Aux=
05:22:22 Message to Camera, serial 345510 queued
05:22:58 Received message from Master: op=PointingHead serial=345523
05:22:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:22:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:22:59 Point started: ret=0
05:22:59 point_skyscan result=0
05:22:59 Check angles
05:22:59 SkyScan query
05:23:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
05:23:00 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
05:23:00 Check angles
05:23:00 SkyScan query
05:23:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.85<-14990  Statuses=0008 0009
05:23:01 Msec=750  True Az=112.995  Ze=-44.85  Az status=0008  Ze status=0009
05:23:01 Check angles
05:23:01 SkyScan query
05:23:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.79<-16386  Statuses=0008 0009
05:23:02 Msec=1500  True Az=112.995  Ze=-65.79  Az status=0008  Ze status=0009
05:23:02 Check angles
05:23:02 SkyScan query
05:23:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.745<-17783  Statuses=0008 0009
05:23:02 Msec=2250  True Az=112.995  Ze=-86.745  Az status=0008  Ze status=0009
05:23:03 Check angles
05:23:03 SkyScan query
05:23:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.15<-19210  Statuses=0008 0009
05:23:03 Msec=3000  True Az=112.995  Ze=-108.15  Az status=0008  Ze status=0009
05:23:03 Check angles
05:23:03 SkyScan query
05:23:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.525<-20635  Statuses=0008 0009
05:23:04 Msec=3750  True Az=112.995  Ze=-129.525  Az status=0008  Ze status=0009
05:23:04 Check angles
05:23:04 SkyScan query
05:23:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.48<-22032  Statuses=0008 0009
05:23:05 Msec=4500  True Az=112.995  Ze=-150.48  Az status=0008  Ze status=0009
05:23:05 Check angles
05:23:05 SkyScan query
05:23:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.24<-23416  Statuses=0008 0009
05:23:05 Msec=5250  True Az=112.995  Ze=-171.24  Az status=0008  Ze status=0009
05:23:06 Check angles
05:23:06 SkyScan query
05:23:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:23:06 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
05:23:06 Message to Master queued w/err=0: serial=345523 error=0
05:23:11 Received message from Master: op=Filter serial=345524
05:23:11 Color wheel filter change from 0 to 0
05:23:11 FLIGetFilterPos err=0  currentPosition=0
05:23:11 FLIGetStepsRemaining err=0  RemainingSteps=0
05:23:11 Filter is already there-color wheel unchanged
05:23:11 Received message from Master: op=Shutter serial=345525
05:23:11 Shutter LASER open
05:23:11 Received message from Camera: op=State serial=345527
05:23:11 GetSingleValue result=40  Value=cccccccc
05:23:11 SkyScan query
05:23:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:23:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:12 Parameters OK
05:23:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:12 Set A/D data flow result=40
05:23:12 Set A/D channel type result=40
05:23:12 Set A/D encoding result=40
05:23:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:12 Set channel filter=0.000000e+000  result=40
05:23:12 Config A/D  Result=40
05:23:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:12 Get A/D filter: -9.255963e+061  result=40
05:23:12 Get A/D value=-858993460  result=40
05:23:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:12 Parameters OK
05:23:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:12 Set A/D data flow result=40
05:23:12 Set A/D channel type result=40
05:23:12 Set A/D encoding result=40
05:23:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:12 Set channel filter=0.000000e+000  result=40
05:23:12 Config A/D  Result=40
05:23:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:12 Get A/D filter: -9.255963e+061  result=40
05:23:12 Get A/D value=-858993460  result=40
05:23:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:23:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:23:12 Aux=
05:23:12 Message to Camera, serial 345527 queued
05:23:20 Received message from Master: op=Shutter serial=345537
05:23:20 Shutter LASER close
05:23:21 Received message from Master: op=PointingHead serial=345541
05:23:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:23:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:23:21 Point started: ret=0
05:23:21 point_skyscan result=0
05:23:22 Check angles
05:23:22 SkyScan query
05:23:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.025<-21535  Statuses=0008 0009
05:23:23 Msec=0  True Az=112.995  Ze=-143.025  Az status=0008  Ze status=0009
05:23:23 Check angles
05:23:23 SkyScan query
05:23:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.085<-20139  Statuses=0008 0009
05:23:23 Msec=750  True Az=112.995  Ze=-122.085  Az status=0008  Ze status=0009
05:23:24 Check angles
05:23:24 SkyScan query
05:23:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.695<-18713  Statuses=0008 0009
05:23:24 Msec=1500  True Az=112.995  Ze=-100.695  Az status=0008  Ze status=0009
05:23:24 Check angles
05:23:24 SkyScan query
05:23:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.74<-17316  Statuses=0008 0009
05:23:25 Msec=2250  True Az=112.995  Ze=-79.74  Az status=0008  Ze status=0009
05:23:25 Check angles
05:23:25 SkyScan query
05:23:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.785<-15919  Statuses=0008 0009
05:23:26 Msec=3000  True Az=112.995  Ze=-58.785  Az status=0008  Ze status=0009
05:23:26 Check angles
05:23:26 SkyScan query
05:23:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.785<-14519  Statuses=0008 0009
05:23:26 Msec=3750  True Az=112.995  Ze=-37.785  Az status=0008  Ze status=0009
05:23:27 Check angles
05:23:27 SkyScan query
05:23:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
05:23:27 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
05:23:27 Check angles
05:23:27 SkyScan query
05:23:28 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
05:23:28 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
05:23:28 Check angles
05:23:28 SkyScan query
05:23:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:23:29 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:23:29 Message to Master queued w/err=0: serial=345541 error=0
05:23:34 Received message from Master: op=Filter serial=345542
05:23:34 Color wheel filter change from 0 to 0
05:23:34 FLIGetFilterPos err=0  currentPosition=0
05:23:34 FLIGetStepsRemaining err=0  RemainingSteps=0
05:23:34 Filter is already there-color wheel unchanged
05:23:34 Received message from Master: op=Shutter serial=345543
05:23:34 Shutter LASER close
05:23:34 Received message from Camera: op=State serial=345545
05:23:34 GetSingleValue result=40  Value=cccccccc
05:23:34 SkyScan query
05:23:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:23:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:34 Parameters OK
05:23:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:34 Set A/D data flow result=40
05:23:34 Set A/D channel type result=40
05:23:34 Set A/D encoding result=40
05:23:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:34 Set channel filter=0.000000e+000  result=40
05:23:34 Config A/D  Result=40
05:23:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:34 Get A/D filter: -9.255963e+061  result=40
05:23:34 Get A/D value=-858993460  result=40
05:23:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:34 Parameters OK
05:23:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:34 Set A/D data flow result=40
05:23:34 Set A/D channel type result=40
05:23:34 Set A/D encoding result=40
05:23:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:34 Set channel filter=0.000000e+000  result=40
05:23:34 Config A/D  Result=40
05:23:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:34 Get A/D filter: -9.255963e+061  result=40
05:23:34 Get A/D value=-858993460  result=40
05:23:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:23:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:23:34 Aux=
05:23:34 Message to Camera, serial 345545 queued
[UTC 2019-3-19  05:23:48]
05:24:11 Received message from Master: op=PointingHead serial=345558
05:24:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:24:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:24:12 Point started: ret=0
05:24:12 point_skyscan result=0
05:24:12 Check angles
05:24:12 SkyScan query
05:24:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:24:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:24:13 Message to Master queued w/err=0: serial=345558 error=0
05:24:18 Received message from Master: op=Filter serial=345559
05:24:18 Color wheel filter change from 0 to 0
05:24:18 FLIGetFilterPos err=0  currentPosition=0
05:24:18 FLIGetStepsRemaining err=0  RemainingSteps=0
05:24:18 Filter is already there-color wheel unchanged
05:24:18 Received message from Master: op=Shutter serial=345560
05:24:18 Shutter LASER close
05:24:18 Received message from Camera: op=State serial=345562
05:24:18 GetSingleValue result=40  Value=cccccccc
05:24:18 SkyScan query
05:24:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:24:19 Parameters OK
05:24:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:24:19 Set A/D data flow result=40
05:24:19 Set A/D channel type result=40
05:24:19 Set A/D encoding result=40
05:24:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:24:19 Set channel filter=0.000000e+000  result=40
05:24:19 Config A/D  Result=40
05:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:24:19 Get A/D filter: -9.255963e+061  result=40
05:24:19 Get A/D value=-858993460  result=40
05:24:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:24:19 Parameters OK
05:24:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:24:19 Set A/D data flow result=40
05:24:19 Set A/D channel type result=40
05:24:19 Set A/D encoding result=40
05:24:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:24:19 Set channel filter=0.000000e+000  result=40
05:24:19 Config A/D  Result=40
05:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:24:19 Get A/D filter: -9.255963e+061  result=40
05:24:19 Get A/D value=-858993460  result=40
05:24:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:24:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:24:19 Aux=
05:24:19 Message to Camera, serial 345562 queued
05:24:55 Received message from Master: op=PointingHead serial=345574
05:24:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:24:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:24:55 Point started: ret=0
05:24:55 point_skyscan result=0
05:24:56 Check angles
05:24:56 SkyScan query
05:24:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:24:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:24:56 Message to Master queued w/err=0: serial=345574 error=0
05:25:01 Received message from Master: op=Filter serial=345575
05:25:01 Color wheel filter change from 0 to 0
05:25:01 FLIGetFilterPos err=0  currentPosition=0
05:25:01 FLIGetStepsRemaining err=0  RemainingSteps=0
05:25:01 Filter is already there-color wheel unchanged
05:25:02 Received message from Master: op=Shutter serial=345576
05:25:02 Shutter LASER close
05:25:02 Received message from Camera: op=State serial=345578
05:25:02 GetSingleValue result=40  Value=cccccccc
05:25:02 SkyScan query
05:25:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:25:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:25:02 Parameters OK
05:25:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:25:02 Set A/D data flow result=40
05:25:02 Set A/D channel type result=40
05:25:02 Set A/D encoding result=40
05:25:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:25:02 Set channel filter=0.000000e+000  result=40
05:25:02 Config A/D  Result=40
05:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:25:02 Get A/D filter: -9.255963e+061  result=40
05:25:02 Get A/D value=-858993460  result=40
05:25:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:25:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:25:02 Parameters OK
05:25:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:25:02 Set A/D data flow result=40
05:25:02 Set A/D channel type result=40
05:25:02 Set A/D encoding result=40
05:25:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:25:02 Set channel filter=0.000000e+000  result=40
05:25:02 Config A/D  Result=40
05:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:25:02 Get A/D filter: -9.255963e+061  result=40
05:25:02 Get A/D value=-858993460  result=40
05:25:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:25:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:25:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:25:02 Aux=
05:25:02 Message to Camera, serial 345578 queued
05:25:39 Received message from Master: op=PointingHead serial=345591
05:25:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:25:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:25:39 Point started: ret=0
05:25:39 point_skyscan result=0
05:25:40 Check angles
05:25:40 SkyScan query
05:25:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:25:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:25:41 Message to Master queued w/err=0: serial=345591 error=0
05:25:46 Received message from Master: op=Filter serial=345592
05:25:46 Color wheel filter change from 0 to 0
05:25:46 FLIGetFilterPos err=0  currentPosition=0
05:25:46 FLIGetStepsRemaining err=0  RemainingSteps=0
05:25:46 Filter is already there-color wheel unchanged
05:25:46 Received message from Master: op=Shutter serial=345593
05:25:46 Shutter LASER close
05:25:46 Received message from Camera: op=State serial=345595
05:25:46 GetSingleValue result=40  Value=cccccccc
05:25:46 SkyScan query
05:25:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:25:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:25:47 Parameters OK
05:25:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:25:47 Set A/D data flow result=40
05:25:47 Set A/D channel type result=40
05:25:47 Set A/D encoding result=40
05:25:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:25:47 Set channel filter=0.000000e+000  result=40
05:25:47 Config A/D  Result=40
05:25:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:25:47 Get A/D filter: -9.255963e+061  result=40
05:25:47 Get A/D value=-858993460  result=40
05:25:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:25:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:25:47 Parameters OK
05:25:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:25:47 Set A/D data flow result=40
05:25:47 Set A/D channel type result=40
05:25:47 Set A/D encoding result=40
05:25:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:25:47 Set channel filter=0.000000e+000  result=40
05:25:47 Config A/D  Result=40
05:25:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:25:47 Get A/D filter: -9.255963e+061  result=40
05:25:47 Get A/D value=-858993460  result=40
05:25:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:25:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:25:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:25:47 Aux=
05:25:47 Message to Camera, serial 345595 queued
05:26:22 Received message from Master: op=PointingHead serial=345607
05:26:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:26:22 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:26:23 Point started: ret=0
05:26:23 point_skyscan result=0
05:26:24 Check angles
05:26:24 SkyScan query
05:26:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.28<-13552  Statuses=0008 0009
05:26:24 Msec=0  True Az=112.995  Ze=-23.28  Az status=0008  Ze status=0009
05:26:24 Check angles
05:26:24 SkyScan query
05:26:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.25<-14950  Statuses=0008 0009
05:26:25 Msec=750  True Az=112.995  Ze=-44.25  Az status=0008  Ze status=0009
05:26:25 Check angles
05:26:25 SkyScan query
05:26:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.205<-16347  Statuses=0008 0009
05:26:26 Msec=1500  True Az=112.995  Ze=-65.205  Az status=0008  Ze status=0009
05:26:26 Check angles
05:26:26 SkyScan query
05:26:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.595<-17773  Statuses=0008 0009
05:26:26 Msec=2250  True Az=112.995  Ze=-86.595  Az status=0008  Ze status=0009
05:26:27 Check angles
05:26:27 SkyScan query
05:26:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.535<-19169  Statuses=0008 0009
05:26:27 Msec=3000  True Az=112.995  Ze=-107.535  Az status=0008  Ze status=0009
05:26:27 Check angles
05:26:27 SkyScan query
05:26:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.49<-20566  Statuses=0008 0009
05:26:28 Msec=3750  True Az=112.995  Ze=-128.49  Az status=0008  Ze status=0009
05:26:28 Check angles
05:26:28 SkyScan query
05:26:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.88<-21992  Statuses=0008 0009
05:26:29 Msec=4500  True Az=112.995  Ze=-149.88  Az status=0008  Ze status=0009
05:26:29 Check angles
05:26:29 SkyScan query
05:26:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.76<-23384  Statuses=0008 0009
05:26:29 Msec=5250  True Az=112.995  Ze=-170.76  Az status=0008  Ze status=0009
05:26:30 Check angles
05:26:30 SkyScan query
05:26:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:26:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:26:30 Message to Master queued w/err=0: serial=345607 error=0
05:26:35 Received message from Master: op=Filter serial=345608
05:26:35 Color wheel filter change from 0 to 0
05:26:35 FLIGetFilterPos err=0  currentPosition=0
05:26:35 FLIGetStepsRemaining err=0  RemainingSteps=0
05:26:35 Filter is already there-color wheel unchanged
05:26:35 Received message from Master: op=Shutter serial=345609
05:26:35 Shutter LASER open
05:26:35 Received message from Camera: op=State serial=345611
05:26:35 GetSingleValue result=40  Value=cccccccc
05:26:35 SkyScan query
05:26:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:26:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:36 Parameters OK
05:26:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:36 Set A/D data flow result=40
05:26:36 Set A/D channel type result=40
05:26:36 Set A/D encoding result=40
05:26:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:36 Set channel filter=0.000000e+000  result=40
05:26:36 Config A/D  Result=40
05:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:36 Get A/D filter: -9.255963e+061  result=40
05:26:36 Get A/D value=-858993460  result=40
05:26:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:36 Parameters OK
05:26:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:36 Set A/D data flow result=40
05:26:36 Set A/D channel type result=40
05:26:36 Set A/D encoding result=40
05:26:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:36 Set channel filter=0.000000e+000  result=40
05:26:36 Config A/D  Result=40
05:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:36 Get A/D filter: -9.255963e+061  result=40
05:26:36 Get A/D value=-858993460  result=40
05:26:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:26:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:26:36 Aux=
05:26:36 Message to Camera, serial 345611 queued
05:26:44 Received message from Master: op=Shutter serial=345621
05:26:44 Shutter LASER close
05:26:45 Received message from Master: op=PointingHead serial=345625
05:26:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:26:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:26:45 Point started: ret=0
05:26:45 point_skyscan result=0
05:26:46 Check angles
05:26:46 SkyScan query
05:26:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.265<-21551  Statuses=0008 0009
05:26:47 Msec=0  True Az=112.995  Ze=-143.265  Az status=0008  Ze status=0009
05:26:47 Check angles
05:26:47 SkyScan query
05:26:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.325<-20155  Statuses=0008 0009
05:26:47 Msec=750  True Az=112.995  Ze=-122.325  Az status=0008  Ze status=0009
05:26:48 Check angles
05:26:48 SkyScan query
05:26:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.92<-18728  Statuses=0008 0009
05:26:48 Msec=1500  True Az=112.995  Ze=-100.92  Az status=0008  Ze status=0009
05:26:48 Check angles
05:26:48 SkyScan query
05:26:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.98<-17332  Statuses=0008 0009
05:26:49 Msec=2250  True Az=112.995  Ze=-79.98  Az status=0008  Ze status=0009
05:26:49 Check angles
05:26:49 SkyScan query
05:26:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
05:26:50 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
05:26:50 Check angles
05:26:50 SkyScan query
05:26:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.635<-14509  Statuses=0008 0009
05:26:50 Msec=3750  True Az=112.995  Ze=-37.635  Az status=0008  Ze status=0009
05:26:51 Check angles
05:26:51 SkyScan query
05:26:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.68<-13112  Statuses=0008 0009
05:26:51 Msec=4500  True Az=112.995  Ze=-16.68  Az status=0008  Ze status=0009
05:26:51 Check angles
05:26:51 SkyScan query
05:26:52 SkyScan query done: ret=0  az=112.995<-7533  ze=4.23<-11718  Statuses=0008 0009
05:26:52 Msec=5250  True Az=112.995  Ze=4.23  Az status=0008  Ze status=0009
05:26:52 Check angles
05:26:52 SkyScan query
05:26:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:26:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:26:53 Message to Master queued w/err=0: serial=345625 error=0
05:26:58 Received message from Master: op=Filter serial=345626
05:26:58 Color wheel filter change from 0 to 0
05:26:58 FLIGetFilterPos err=0  currentPosition=0
05:26:58 FLIGetStepsRemaining err=0  RemainingSteps=0
05:26:58 Filter is already there-color wheel unchanged
05:26:58 Received message from Master: op=Shutter serial=345627
05:26:58 Shutter LASER close
05:26:58 Received message from Camera: op=State serial=345629
05:26:58 GetSingleValue result=40  Value=cccccccc
05:26:58 SkyScan query
05:26:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:59 Parameters OK
05:26:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:59 Set A/D data flow result=40
05:26:59 Set A/D channel type result=40
05:26:59 Set A/D encoding result=40
05:26:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:59 Set channel filter=0.000000e+000  result=40
05:26:59 Config A/D  Result=40
05:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:59 Get A/D filter: -9.255963e+061  result=40
05:26:59 Get A/D value=-858993460  result=40
05:26:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:59 Parameters OK
05:26:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:59 Set A/D data flow result=40
05:26:59 Set A/D channel type result=40
05:26:59 Set A/D encoding result=40
05:26:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:59 Set channel filter=0.000000e+000  result=40
05:26:59 Config A/D  Result=40
05:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:59 Get A/D filter: -9.255963e+061  result=40
05:26:59 Get A/D value=-858993460  result=40
05:26:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:26:59 Aux=
05:26:59 Message to Camera, serial 345629 queued
05:27:36 Received message from Master: op=PointingHead serial=345642
05:27:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:27:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:27:36 Point started: ret=0
05:27:36 point_skyscan result=0
05:27:37 Check angles
05:27:37 SkyScan query
05:27:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:27:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:27:37 Message to Master queued w/err=0: serial=345642 error=0
05:27:42 Received message from Master: op=Filter serial=345643
05:27:42 Color wheel filter change from 0 to 0
05:27:42 FLIGetFilterPos err=0  currentPosition=0
05:27:42 FLIGetStepsRemaining err=0  RemainingSteps=0
05:27:42 Filter is already there-color wheel unchanged
05:27:42 Received message from Master: op=Shutter serial=345644
05:27:42 Shutter LASER close
05:27:42 Received message from Camera: op=State serial=345646
05:27:42 GetSingleValue result=40  Value=cccccccc
05:27:42 SkyScan query
05:27:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:27:43 Parameters OK
05:27:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:27:43 Set A/D data flow result=40
05:27:43 Set A/D channel type result=40
05:27:43 Set A/D encoding result=40
05:27:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:27:43 Set channel filter=0.000000e+000  result=40
05:27:43 Config A/D  Result=40
05:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:27:43 Get A/D filter: -9.255963e+061  result=40
05:27:43 Get A/D value=-858993460  result=40
05:27:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:27:43 Parameters OK
05:27:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:27:43 Set A/D data flow result=40
05:27:43 Set A/D channel type result=40
05:27:43 Set A/D encoding result=40
05:27:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:27:43 Set channel filter=0.000000e+000  result=40
05:27:43 Config A/D  Result=40
05:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:27:43 Get A/D filter: -9.255963e+061  result=40
05:27:43 Get A/D value=-858993460  result=40
05:27:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:27:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:27:43 Aux=
05:27:43 Message to Camera, serial 345646 queued
05:28:20 Received message from Master: op=PointingHead serial=345659
05:28:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:28:20 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:28:20 Point started: ret=0
05:28:20 point_skyscan result=0
05:28:21 Check angles
05:28:21 SkyScan query
05:28:21 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.51<-12434  Statuses=0009 0008
05:28:21 Msec=0  True Az=135.915  Ze=-6.51  Az status=0009  Ze status=0008
05:28:22 Check angles
05:28:22 SkyScan query
05:28:22 SkyScan query done: ret=0  az=153.45<-10230  ze=-6.495<-12433  Statuses=0009 0008
05:28:22 Msec=750  True Az=153.45  Ze=-6.495  Az status=0009  Ze status=0008
05:28:22 Check angles
05:28:22 SkyScan query
05:28:23 SkyScan query done: ret=0  az=171.27<-11418  ze=-6.495<-12433  Statuses=0009 0008
05:28:23 Msec=1500  True Az=171.27  Ze=-6.495  Az status=0009  Ze status=0008
05:28:23 Check angles
05:28:23 SkyScan query
05:28:24 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:28:24 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:28:24 Message to Master queued w/err=0: serial=345659 error=0
05:28:29 Received message from Master: op=Filter serial=345660
05:28:29 Color wheel filter change from 0 to 0
05:28:29 FLIGetFilterPos err=0  currentPosition=0
05:28:29 FLIGetStepsRemaining err=0  RemainingSteps=0
05:28:29 Filter is already there-color wheel unchanged
05:28:29 Received message from Master: op=Shutter serial=345661
05:28:29 Shutter LASER close
05:28:29 Received message from Camera: op=State serial=345663
05:28:29 GetSingleValue result=40  Value=cccccccc
05:28:29 SkyScan query
05:28:30 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:28:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:28:30 Parameters OK
05:28:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:28:30 Set A/D data flow result=40
05:28:30 Set A/D channel type result=40
05:28:30 Set A/D encoding result=40
05:28:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:28:30 Set channel filter=0.000000e+000  result=40
05:28:30 Config A/D  Result=40
05:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:28:30 Get A/D filter: -9.255963e+061  result=40
05:28:30 Get A/D value=-858993460  result=40
05:28:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:28:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:28:30 Parameters OK
05:28:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:28:30 Set A/D data flow result=40
05:28:30 Set A/D channel type result=40
05:28:30 Set A/D encoding result=40
05:28:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:28:30 Set channel filter=0.000000e+000  result=40
05:28:30 Config A/D  Result=40
05:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:28:30 Get A/D filter: -9.255963e+061  result=40
05:28:30 Get A/D value=-858993460  result=40
05:28:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:28:30 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:28:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:28:30 Aux=
05:28:30 Message to Camera, serial 345663 queued
05:29:06 Received message from Master: op=PointingHead serial=345676
05:29:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:29:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:29:07 Point started: ret=0
05:29:07 point_skyscan result=0
05:29:08 Check angles
05:29:08 SkyScan query
05:29:08 SkyScan query done: ret=0  az=152.655<-10177  ze=6.51<-11566  Statuses=0009 0008
05:29:08 Msec=0  True Az=152.655  Ze=6.51  Az status=0009  Ze status=0008
05:29:08 Check angles
05:29:08 SkyScan query
05:29:09 SkyScan query done: ret=0  az=135.18<-9012  ze=6.495<-11567  Statuses=0009 0008
05:29:09 Msec=750  True Az=135.18  Ze=6.495  Az status=0009  Ze status=0008
05:29:09 Check angles
05:29:09 SkyScan query
05:29:10 SkyScan query done: ret=0  az=117.735<-7849  ze=6.495<-11567  Statuses=0009 0008
05:29:10 Msec=1500  True Az=117.735  Ze=6.495  Az status=0009  Ze status=0008
05:29:10 Check angles
05:29:10 SkyScan query
05:29:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:29:10 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:29:10 Message to Master queued w/err=0: serial=345676 error=0
05:29:15 Received message from Master: op=Filter serial=345677
05:29:15 Color wheel filter change from 0 to 0
05:29:15 FLIGetFilterPos err=0  currentPosition=0
05:29:15 FLIGetStepsRemaining err=0  RemainingSteps=0
05:29:15 Filter is already there-color wheel unchanged
05:29:16 Received message from Master: op=Shutter serial=345678
05:29:16 Shutter LASER close
05:29:16 Received message from Camera: op=State serial=345680
05:29:16 GetSingleValue result=40  Value=cccccccc
05:29:16 SkyScan query
05:29:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:29:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:29:16 Parameters OK
05:29:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:29:16 Set A/D data flow result=40
05:29:16 Set A/D channel type result=40
05:29:16 Set A/D encoding result=40
05:29:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:29:16 Set channel filter=0.000000e+000  result=40
05:29:16 Config A/D  Result=40
05:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:29:16 Get A/D filter: -9.255963e+061  result=40
05:29:16 Get A/D value=-858993460  result=40
05:29:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:29:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:29:16 Parameters OK
05:29:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:29:16 Set A/D data flow result=40
05:29:16 Set A/D channel type result=40
05:29:16 Set A/D encoding result=40
05:29:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:29:16 Set channel filter=0.000000e+000  result=40
05:29:16 Config A/D  Result=40
05:29:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:29:16 Get A/D filter: -9.255963e+061  result=40
05:29:16 Get A/D value=-858993460  result=40
05:29:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:29:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:29:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:29:16 Aux=
05:29:16 Message to Camera, serial 345680 queued
05:29:53 Received message from Master: op=PointingHead serial=345693
05:29:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:29:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:29:53 Point started: ret=0
05:29:53 point_skyscan result=0
05:29:54 Check angles
05:29:54 SkyScan query
05:29:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
05:29:55 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
05:29:55 Check angles
05:29:55 SkyScan query
05:29:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
05:29:55 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
05:29:56 Check angles
05:29:56 SkyScan query
05:29:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.355<-16357  Statuses=0008 0009
05:29:56 Msec=1500  True Az=112.995  Ze=-65.355  Az status=0008  Ze status=0009
05:29:56 Check angles
05:29:56 SkyScan query
05:29:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
05:29:57 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
05:29:57 Check angles
05:29:57 SkyScan query
05:29:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
05:29:58 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
05:29:58 Check angles
05:29:58 SkyScan query
05:29:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.61<-20574  Statuses=0008 0009
05:29:58 Msec=3750  True Az=112.995  Ze=-128.61  Az status=0008  Ze status=0009
05:29:59 Check angles
05:29:59 SkyScan query
05:29:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.015<-22001  Statuses=0008 0009
05:29:59 Msec=4500  True Az=112.995  Ze=-150.015  Az status=0008  Ze status=0009
05:29:59 Check angles
05:29:59 SkyScan query
05:30:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.88<-23392  Statuses=0008 0009
05:30:00 Msec=5250  True Az=112.995  Ze=-170.88  Az status=0008  Ze status=0009
05:30:00 Check angles
05:30:00 SkyScan query
05:30:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:30:01 Msec=6000  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
05:30:01 Message to Master queued w/err=0: serial=345693 error=0
05:30:06 Received message from Master: op=Filter serial=345694
05:30:06 Color wheel filter change from 0 to 0
05:30:06 FLIGetFilterPos err=0  currentPosition=0
05:30:06 FLIGetStepsRemaining err=0  RemainingSteps=0
05:30:06 Filter is already there-color wheel unchanged
05:30:06 Received message from Master: op=Shutter serial=345695
05:30:06 Shutter LASER open
05:30:06 Received message from Camera: op=State serial=345697
05:30:06 GetSingleValue result=40  Value=cccccccc
05:30:06 SkyScan query
05:30:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:30:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:30:07 Parameters OK
05:30:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:30:07 Set A/D data flow result=40
05:30:07 Set A/D channel type result=40
05:30:07 Set A/D encoding result=40
05:30:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:30:07 Set channel filter=0.000000e+000  result=40
05:30:07 Config A/D  Result=40
05:30:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:30:07 Get A/D filter: -9.255963e+061  result=40
05:30:07 Get A/D value=-858993460  result=40
05:30:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:30:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:30:07 Parameters OK
05:30:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:30:07 Set A/D data flow result=40
05:30:07 Set A/D channel type result=40
05:30:07 Set A/D encoding result=40
05:30:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:30:07 Set channel filter=0.000000e+000  result=40
05:30:07 Config A/D  Result=40
05:30:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:30:07 Get A/D filter: -9.255963e+061  result=40
05:30:07 Get A/D value=-858993460  result=40
05:30:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:30:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:30:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:30:07 Aux=
05:30:07 Message to Camera, serial 345697 queued
05:30:15 Received message from Master: op=Shutter serial=345707
05:30:15 Shutter LASER close
05:30:16 Received message from Master: op=PointingHead serial=345711
05:30:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:30:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:30:16 Point started: ret=0
05:30:16 point_skyscan result=0
05:30:17 Check angles
05:30:17 SkyScan query
05:30:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.085<-21539  Statuses=0008 0009
05:30:17 Msec=0  True Az=112.995  Ze=-143.085  Az status=0008  Ze status=0009
05:30:17 Check angles
05:30:17 SkyScan query
05:30:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.13<-20142  Statuses=0008 0009
05:30:18 Msec=750  True Az=112.995  Ze=-122.13  Az status=0008  Ze status=0009
05:30:18 Check angles
05:30:18 SkyScan query
05:30:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.19<-18746  Statuses=0008 0009
05:30:19 Msec=1500  True Az=112.995  Ze=-101.19  Az status=0008  Ze status=0009
05:30:19 Check angles
05:30:19 SkyScan query
05:30:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.25<-17350  Statuses=0008 0009
05:30:19 Msec=2250  True Az=112.995  Ze=-80.25  Az status=0008  Ze status=0009
05:30:20 Check angles
05:30:20 SkyScan query
05:30:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.31<-15954  Statuses=0008 0009
05:30:20 Msec=3000  True Az=112.995  Ze=-59.31  Az status=0008  Ze status=0009
05:30:20 Check angles
05:30:20 SkyScan query
05:30:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.295<-14553  Statuses=0008 0009
05:30:21 Msec=3750  True Az=112.995  Ze=-38.295  Az status=0008  Ze status=0009
05:30:21 Check angles
05:30:21 SkyScan query
05:30:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.37<-13158  Statuses=0008 0009
05:30:22 Msec=4500  True Az=112.995  Ze=-17.37  Az status=0008  Ze status=0009
05:30:22 Check angles
05:30:22 SkyScan query
05:30:22 SkyScan query done: ret=0  az=112.995<-7533  ze=3.6<-11760  Statuses=0008 0009
05:30:22 Msec=5250  True Az=112.995  Ze=3.6  Az status=0008  Ze status=0009
05:30:23 Check angles
05:30:23 SkyScan query
05:30:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:30:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:30:23 Message to Master queued w/err=0: serial=345711 error=0
05:30:28 Received message from Master: op=Filter serial=345712
05:30:28 Color wheel filter change from 0 to 0
05:30:28 FLIGetFilterPos err=0  currentPosition=0
05:30:28 FLIGetStepsRemaining err=0  RemainingSteps=0
05:30:28 Filter is already there-color wheel unchanged
05:30:28 Received message from Master: op=Shutter serial=345713
05:30:28 Shutter LASER close
05:30:29 Received message from Camera: op=State serial=345715
05:30:29 GetSingleValue result=40  Value=cccccccc
05:30:29 SkyScan query
05:30:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:30:29 Parameters OK
05:30:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:30:29 Set A/D data flow result=40
05:30:29 Set A/D channel type result=40
05:30:29 Set A/D encoding result=40
05:30:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:30:29 Set channel filter=0.000000e+000  result=40
05:30:29 Config A/D  Result=40
05:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:30:29 Get A/D filter: -9.255963e+061  result=40
05:30:29 Get A/D value=-858993460  result=40
05:30:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:30:29 Parameters OK
05:30:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:30:29 Set A/D data flow result=40
05:30:29 Set A/D channel type result=40
05:30:29 Set A/D encoding result=40
05:30:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:30:29 Set channel filter=0.000000e+000  result=40
05:30:29 Config A/D  Result=40
05:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:30:29 Get A/D filter: -9.255963e+061  result=40
05:30:29 Get A/D value=-858993460  result=40
05:30:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:30:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:30:29 Aux=
05:30:29 Message to Camera, serial 345715 queued
05:31:06 Received message from Master: op=PointingHead serial=345728
05:31:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:31:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:31:06 Point started: ret=0
05:31:06 point_skyscan result=0
05:31:07 Check angles
05:31:07 SkyScan query
05:31:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:31:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:31:08 Message to Master queued w/err=0: serial=345728 error=0
05:31:13 Received message from Master: op=Filter serial=345729
05:31:13 Color wheel filter change from 0 to 0
05:31:13 FLIGetFilterPos err=0  currentPosition=0
05:31:13 FLIGetStepsRemaining err=0  RemainingSteps=0
05:31:13 Filter is already there-color wheel unchanged
05:31:13 Received message from Master: op=Shutter serial=345730
05:31:13 Shutter LASER close
05:31:13 Received message from Camera: op=State serial=345732
05:31:13 GetSingleValue result=40  Value=cccccccc
05:31:13 SkyScan query
05:31:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:31:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:31:13 Parameters OK
05:31:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:31:13 Set A/D data flow result=40
05:31:13 Set A/D channel type result=40
05:31:13 Set A/D encoding result=40
05:31:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:31:13 Set channel filter=0.000000e+000  result=40
05:31:13 Config A/D  Result=40
05:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:31:13 Get A/D filter: -9.255963e+061  result=40
05:31:13 Get A/D value=-858993460  result=40
05:31:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:31:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:31:13 Parameters OK
05:31:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:31:13 Set A/D data flow result=40
05:31:13 Set A/D channel type result=40
05:31:13 Set A/D encoding result=40
05:31:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:31:13 Set channel filter=0.000000e+000  result=40
05:31:13 Config A/D  Result=40
05:31:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:31:13 Get A/D filter: -9.255963e+061  result=40
05:31:13 Get A/D value=-858993460  result=40
05:31:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:31:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:31:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:31:13 Aux=
05:31:13 Message to Camera, serial 345732 queued
05:31:50 Received message from Master: op=PointingHead serial=345745
05:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:31:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:31:51 Point started: ret=0
05:31:51 point_skyscan result=0
05:31:51 Check angles
05:31:51 SkyScan query
05:31:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:31:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:31:52 Message to Master queued w/err=0: serial=345745 error=0
05:31:57 Received message from Master: op=Filter serial=345746
05:31:57 Color wheel filter change from 0 to 0
05:31:57 FLIGetFilterPos err=0  currentPosition=0
05:31:57 FLIGetStepsRemaining err=0  RemainingSteps=0
05:31:57 Filter is already there-color wheel unchanged
05:31:57 Received message from Master: op=Shutter serial=345747
05:31:57 Shutter LASER close
05:31:57 Received message from Camera: op=State serial=345749
05:31:57 GetSingleValue result=40  Value=cccccccc
05:31:57 SkyScan query
05:31:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:31:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:31:58 Parameters OK
05:31:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:31:58 Set A/D data flow result=40
05:31:58 Set A/D channel type result=40
05:31:58 Set A/D encoding result=40
05:31:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:31:58 Set channel filter=0.000000e+000  result=40
05:31:58 Config A/D  Result=40
05:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:31:58 Get A/D filter: -9.255963e+061  result=40
05:31:58 Get A/D value=-858993460  result=40
05:31:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:31:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:31:58 Parameters OK
05:31:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:31:58 Set A/D data flow result=40
05:31:58 Set A/D channel type result=40
05:31:58 Set A/D encoding result=40
05:31:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:31:58 Set channel filter=0.000000e+000  result=40
05:31:58 Config A/D  Result=40
05:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:31:58 Get A/D filter: -9.255963e+061  result=40
05:31:58 Get A/D value=-858993460  result=40
05:31:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:31:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:31:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:31:58 Aux=
05:31:58 Message to Camera, serial 345749 queued
05:32:35 Received message from Master: op=PointingHead serial=345762
05:32:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:32:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:32:35 Point started: ret=0
05:32:35 point_skyscan result=0
05:32:36 Check angles
05:32:36 SkyScan query
05:32:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:32:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:32:36 Message to Master queued w/err=0: serial=345762 error=0
05:32:41 Received message from Master: op=Filter serial=345763
05:32:41 Color wheel filter change from 0 to 0
05:32:41 FLIGetFilterPos err=0  currentPosition=0
05:32:41 FLIGetStepsRemaining err=0  RemainingSteps=0
05:32:41 Filter is already there-color wheel unchanged
05:32:41 Received message from Master: op=Shutter serial=345764
05:32:41 Shutter LASER close
05:32:41 Received message from Camera: op=State serial=345766
05:32:41 GetSingleValue result=40  Value=cccccccc
05:32:41 SkyScan query
05:32:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:32:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:32:42 Parameters OK
05:32:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:32:42 Set A/D data flow result=40
05:32:42 Set A/D channel type result=40
05:32:42 Set A/D encoding result=40
05:32:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:32:42 Set channel filter=0.000000e+000  result=40
05:32:42 Config A/D  Result=40
05:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:32:42 Get A/D filter: -9.255963e+061  result=40
05:32:42 Get A/D value=-858993460  result=40
05:32:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:32:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:32:42 Parameters OK
05:32:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:32:42 Set A/D data flow result=40
05:32:42 Set A/D channel type result=40
05:32:42 Set A/D encoding result=40
05:32:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:32:42 Set channel filter=0.000000e+000  result=40
05:32:42 Config A/D  Result=40
05:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:32:42 Get A/D filter: -9.255963e+061  result=40
05:32:42 Get A/D value=-858993460  result=40
05:32:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:32:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:32:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:32:42 Aux=
05:32:42 Message to Camera, serial 345766 queued
05:33:19 Received message from Master: op=PointingHead serial=345779
05:33:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:33:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:33:19 Point started: ret=0
05:33:19 point_skyscan result=0
05:33:20 Check angles
05:33:20 SkyScan query
05:33:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.025<-13535  Statuses=0008 0009
05:33:21 Msec=0  True Az=112.995  Ze=-23.025  Az status=0008  Ze status=0009
05:33:21 Check angles
05:33:21 SkyScan query
05:33:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.055<-14937  Statuses=0008 0009
05:33:21 Msec=750  True Az=112.995  Ze=-44.055  Az status=0008  Ze status=0009
05:33:21 Check angles
05:33:21 SkyScan query
05:33:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.385<-16359  Statuses=0008 0009
05:33:22 Msec=1500  True Az=112.995  Ze=-65.385  Az status=0008  Ze status=0009
05:33:22 Check angles
05:33:22 SkyScan query
05:33:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.355<-17757  Statuses=0008 0009
05:33:23 Msec=2250  True Az=112.995  Ze=-86.355  Az status=0008  Ze status=0009
05:33:23 Check angles
05:33:23 SkyScan query
05:33:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.295<-19153  Statuses=0008 0009
05:33:24 Msec=3000  True Az=112.995  Ze=-107.295  Az status=0008  Ze status=0009
05:33:24 Check angles
05:33:24 SkyScan query
05:33:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.67<-20578  Statuses=0008 0009
05:33:24 Msec=3750  True Az=112.995  Ze=-128.67  Az status=0008  Ze status=0009
05:33:25 Check angles
05:33:25 SkyScan query
05:33:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.06<-22004  Statuses=0008 0009
05:33:25 Msec=4500  True Az=112.995  Ze=-150.06  Az status=0008  Ze status=0009
05:33:25 Check angles
05:33:25 SkyScan query
05:33:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.91<-23394  Statuses=0008 0009
05:33:26 Msec=5250  True Az=112.995  Ze=-170.91  Az status=0008  Ze status=0009
05:33:26 Check angles
05:33:26 SkyScan query
05:33:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:33:27 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:33:27 Message to Master queued w/err=0: serial=345779 error=0
05:33:32 Received message from Master: op=Filter serial=345780
05:33:32 Color wheel filter change from 0 to 0
05:33:32 FLIGetFilterPos err=0  currentPosition=0
05:33:32 FLIGetStepsRemaining err=0  RemainingSteps=0
05:33:32 Filter is already there-color wheel unchanged
05:33:32 Received message from Master: op=Shutter serial=345781
05:33:32 Shutter LASER open
05:33:32 Received message from Camera: op=State serial=345783
05:33:32 GetSingleValue result=40  Value=cccccccc
05:33:32 SkyScan query
05:33:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:33 Parameters OK
05:33:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:33 Set A/D data flow result=40
05:33:33 Set A/D channel type result=40
05:33:33 Set A/D encoding result=40
05:33:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:33 Set channel filter=0.000000e+000  result=40
05:33:33 Config A/D  Result=40
05:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:33 Get A/D filter: -9.255963e+061  result=40
05:33:33 Get A/D value=-858993460  result=40
05:33:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:33 Parameters OK
05:33:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:33 Set A/D data flow result=40
05:33:33 Set A/D channel type result=40
05:33:33 Set A/D encoding result=40
05:33:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:33 Set channel filter=0.000000e+000  result=40
05:33:33 Config A/D  Result=40
05:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:33 Get A/D filter: -9.255963e+061  result=40
05:33:33 Get A/D value=-858993460  result=40
05:33:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:33:33 Aux=
05:33:33 Message to Camera, serial 345783 queued
05:33:35 Received message from Master: op=Identify serial=345787
05:33:41 Received message from Master: op=Shutter serial=345796
05:33:41 Shutter LASER close
05:33:42 Received message from Master: op=PointingHead serial=345800
05:33:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:33:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:33:42 Point started: ret=0
05:33:42 point_skyscan result=0
05:33:43 Check angles
05:33:43 SkyScan query
05:33:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
05:33:43 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
05:33:44 Check angles
05:33:44 SkyScan query
05:33:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
05:33:44 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
05:33:44 Check angles
05:33:44 SkyScan query
05:33:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.55<-18770  Statuses=0008 0009
05:33:45 Msec=1500  True Az=112.995  Ze=-101.55  Az status=0008  Ze status=0009
05:33:45 Check angles
05:33:45 SkyScan query
05:33:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.58<-17372  Statuses=0008 0009
05:33:46 Msec=2250  True Az=112.995  Ze=-80.58  Az status=0008  Ze status=0009
05:33:46 Check angles
05:33:46 SkyScan query
05:33:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.22<-15948  Statuses=0008 0009
05:33:46 Msec=3000  True Az=112.995  Ze=-59.22  Az status=0008  Ze status=0009
05:33:47 Check angles
05:33:47 SkyScan query
05:33:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.235<-14549  Statuses=0008 0009
05:33:47 Msec=3750  True Az=112.995  Ze=-38.235  Az status=0008  Ze status=0009
05:33:47 Check angles
05:33:47 SkyScan query
05:33:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.31<-13154  Statuses=0008 0009
05:33:48 Msec=4500  True Az=112.995  Ze=-17.31  Az status=0008  Ze status=0009
05:33:48 Check angles
05:33:48 SkyScan query
05:33:49 SkyScan query done: ret=0  az=112.995<-7533  ze=3.66<-11756  Statuses=0008 0009
05:33:49 Msec=5250  True Az=112.995  Ze=3.66  Az status=0008  Ze status=0009
05:33:49 Check angles
05:33:49 SkyScan query
05:33:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:33:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:33:49 Message to Master queued w/err=0: serial=345800 error=0
05:33:54 Received message from Master: op=Filter serial=345801
05:33:54 Color wheel filter change from 0 to 0
05:33:54 FLIGetFilterPos err=0  currentPosition=0
05:33:54 FLIGetStepsRemaining err=0  RemainingSteps=0
05:33:54 Filter is already there-color wheel unchanged
05:33:55 Received message from Master: op=Shutter serial=345802
05:33:55 Shutter LASER close
05:33:55 Received message from Camera: op=State serial=345804
05:33:55 GetSingleValue result=40  Value=cccccccc
05:33:55 SkyScan query
05:33:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:55 Parameters OK
05:33:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:55 Set A/D data flow result=40
05:33:55 Set A/D channel type result=40
05:33:55 Set A/D encoding result=40
05:33:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:55 Set channel filter=0.000000e+000  result=40
05:33:55 Config A/D  Result=40
05:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:55 Get A/D filter: -9.255963e+061  result=40
05:33:55 Get A/D value=-858993460  result=40
05:33:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:55 Parameters OK
05:33:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:55 Set A/D data flow result=40
05:33:55 Set A/D channel type result=40
05:33:55 Set A/D encoding result=40
05:33:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:55 Set channel filter=0.000000e+000  result=40
05:33:55 Config A/D  Result=40
05:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:55 Get A/D filter: -9.255963e+061  result=40
05:33:55 Get A/D value=-858993460  result=40
05:33:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:33:55 Aux=
05:33:55 Message to Camera, serial 345804 queued
05:34:32 Received message from Master: op=PointingHead serial=345817
05:34:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:34:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:34:32 Point started: ret=0
05:34:32 point_skyscan result=0
05:34:33 Check angles
05:34:33 SkyScan query
05:34:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:34:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:34:34 Message to Master queued w/err=0: serial=345817 error=0
05:34:39 Received message from Master: op=Filter serial=345818
[UTC 2019-3-19  05:34:39]
05:34:39 Color wheel filter change from 0 to 0
05:34:39 FLIGetFilterPos err=0  currentPosition=0
05:34:39 FLIGetStepsRemaining err=0  RemainingSteps=0
05:34:39 Filter is already there-color wheel unchanged
05:34:39 Received message from Master: op=Shutter serial=345819
05:34:39 Shutter LASER close
05:34:39 Received message from Camera: op=State serial=345821
05:34:39 GetSingleValue result=40  Value=cccccccc
05:34:39 SkyScan query
05:34:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:34:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:34:40 Parameters OK
05:34:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:34:40 Set A/D data flow result=40
05:34:40 Set A/D channel type result=40
05:34:40 Set A/D encoding result=40
05:34:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:34:40 Set channel filter=0.000000e+000  result=40
05:34:40 Config A/D  Result=40
05:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:34:40 Get A/D filter: -9.255963e+061  result=40
05:34:40 Get A/D value=-858993460  result=40
05:34:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:34:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:34:40 Parameters OK
05:34:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:34:40 Set A/D data flow result=40
05:34:40 Set A/D channel type result=40
05:34:40 Set A/D encoding result=40
05:34:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:34:40 Set channel filter=0.000000e+000  result=40
05:34:40 Config A/D  Result=40
05:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:34:40 Get A/D filter: -9.255963e+061  result=40
05:34:40 Get A/D value=-858993460  result=40
05:34:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:34:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:34:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:34:40 Aux=
05:34:40 Message to Camera, serial 345821 queued
05:35:16 Received message from Master: op=PointingHead serial=345834
05:35:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:35:16 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:35:17 Point started: ret=0
05:35:17 point_skyscan result=0
05:35:18 Check angles
05:35:18 SkyScan query
05:35:18 SkyScan query done: ret=0  az=135.885<-9059  ze=-6.51<-12434  Statuses=0009 0008
05:35:18 Msec=0  True Az=135.885  Ze=-6.51  Az status=0009  Ze status=0008
05:35:18 Check angles
05:35:18 SkyScan query
05:35:19 SkyScan query done: ret=0  az=153.675<-10245  ze=-6.495<-12433  Statuses=0009 0008
05:35:19 Msec=750  True Az=153.675  Ze=-6.495  Az status=0009  Ze status=0008
05:35:19 Check angles
05:35:19 SkyScan query
05:35:20 SkyScan query done: ret=0  az=171.195<-11413  ze=-6.495<-12433  Statuses=0009 0008
05:35:20 Msec=1500  True Az=171.195  Ze=-6.495  Az status=0009  Ze status=0008
05:35:20 Check angles
05:35:20 SkyScan query
05:35:20 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:35:20 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:35:20 Message to Master queued w/err=0: serial=345834 error=0
05:35:25 Received message from Master: op=Filter serial=345835
05:35:25 Color wheel filter change from 0 to 0
05:35:25 FLIGetFilterPos err=0  currentPosition=0
05:35:25 FLIGetStepsRemaining err=0  RemainingSteps=0
05:35:25 Filter is already there-color wheel unchanged
05:35:26 Received message from Master: op=Shutter serial=345836
05:35:26 Shutter LASER close
05:35:26 Received message from Camera: op=State serial=345838
05:35:26 GetSingleValue result=40  Value=cccccccc
05:35:26 SkyScan query
05:35:26 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:35:26 Parameters OK
05:35:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:35:26 Set A/D data flow result=40
05:35:26 Set A/D channel type result=40
05:35:26 Set A/D encoding result=40
05:35:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:35:26 Set channel filter=0.000000e+000  result=40
05:35:26 Config A/D  Result=40
05:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:35:26 Get A/D filter: -9.255963e+061  result=40
05:35:26 Get A/D value=-858993460  result=40
05:35:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:35:26 Parameters OK
05:35:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:35:26 Set A/D data flow result=40
05:35:26 Set A/D channel type result=40
05:35:26 Set A/D encoding result=40
05:35:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:35:26 Set channel filter=0.000000e+000  result=40
05:35:26 Config A/D  Result=40
05:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:35:26 Get A/D filter: -9.255963e+061  result=40
05:35:26 Get A/D value=-858993460  result=40
05:35:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:35:26 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:35:26 Aux=
05:35:26 Message to Camera, serial 345838 queued
05:36:03 Received message from Master: op=PointingHead serial=345851
05:36:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:36:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:36:03 Point started: ret=0
05:36:03 point_skyscan result=0
05:36:04 Check angles
05:36:04 SkyScan query
05:36:05 SkyScan query done: ret=0  az=152.925<-10195  ze=6.51<-11566  Statuses=0009 0008
05:36:05 Msec=0  True Az=152.925  Ze=6.51  Az status=0009  Ze status=0008
05:36:05 Check angles
05:36:05 SkyScan query
05:36:05 SkyScan query done: ret=0  az=135.465<-9031  ze=6.495<-11567  Statuses=0009 0008
05:36:05 Msec=750  True Az=135.465  Ze=6.495  Az status=0009  Ze status=0008
05:36:06 Check angles
05:36:06 SkyScan query
05:36:06 SkyScan query done: ret=0  az=117.9<-7860  ze=6.495<-11567  Statuses=0009 0008
05:36:06 Msec=1500  True Az=117.9  Ze=6.495  Az status=0009  Ze status=0008
05:36:06 Check angles
05:36:06 SkyScan query
05:36:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:36:07 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:36:07 Message to Master queued w/err=0: serial=345851 error=0
05:36:12 Received message from Master: op=Filter serial=345852
05:36:12 Color wheel filter change from 0 to 0
05:36:12 FLIGetFilterPos err=0  currentPosition=0
05:36:12 FLIGetStepsRemaining err=0  RemainingSteps=0
05:36:12 Filter is already there-color wheel unchanged
05:36:12 Received message from Master: op=Shutter serial=345853
05:36:12 Shutter LASER close
05:36:12 Received message from Camera: op=State serial=345855
05:36:12 GetSingleValue result=40  Value=cccccccc
05:36:12 SkyScan query
05:36:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:36:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:36:13 Parameters OK
05:36:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:36:13 Set A/D data flow result=40
05:36:13 Set A/D channel type result=40
05:36:13 Set A/D encoding result=40
05:36:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:36:13 Set channel filter=0.000000e+000  result=40
05:36:13 Config A/D  Result=40
05:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:36:13 Get A/D filter: -9.255963e+061  result=40
05:36:13 Get A/D value=-858993460  result=40
05:36:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:36:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:36:13 Parameters OK
05:36:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:36:13 Set A/D data flow result=40
05:36:13 Set A/D channel type result=40
05:36:13 Set A/D encoding result=40
05:36:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:36:13 Set channel filter=0.000000e+000  result=40
05:36:13 Config A/D  Result=40
05:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:36:13 Get A/D filter: -9.255963e+061  result=40
05:36:13 Get A/D value=-858993460  result=40
05:36:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:36:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:36:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:36:13 Aux=
05:36:13 Message to Camera, serial 345855 queued
05:36:50 Received message from Master: op=PointingHead serial=345868
05:36:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:36:50 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:36:50 Point started: ret=0
05:36:50 point_skyscan result=0
05:36:51 Check angles
05:36:51 SkyScan query
05:36:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.205<-13547  Statuses=0008 0009
05:36:51 Msec=0  True Az=112.995  Ze=-23.205  Az status=0008  Ze status=0009
05:36:51 Check angles
05:36:51 SkyScan query
05:36:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.61<-14974  Statuses=0008 0009
05:36:52 Msec=750  True Az=112.995  Ze=-44.61  Az status=0008  Ze status=0009
05:36:52 Check angles
05:36:52 SkyScan query
05:36:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.55<-16370  Statuses=0008 0009
05:36:53 Msec=1500  True Az=112.995  Ze=-65.55  Az status=0008  Ze status=0009
05:36:53 Check angles
05:36:53 SkyScan query
05:36:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.52<-17768  Statuses=0008 0009
05:36:54 Msec=2250  True Az=112.995  Ze=-86.52  Az status=0008  Ze status=0009
05:36:54 Check angles
05:36:54 SkyScan query
05:36:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.895<-19193  Statuses=0008 0009
05:36:54 Msec=3000  True Az=112.995  Ze=-107.895  Az status=0008  Ze status=0009
05:36:54 Check angles
05:36:54 SkyScan query
05:36:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.835<-20589  Statuses=0008 0009
05:36:55 Msec=3750  True Az=112.995  Ze=-128.835  Az status=0008  Ze status=0009
05:36:55 Check angles
05:36:55 SkyScan query
05:36:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.24<-22016  Statuses=0008 0009
05:36:56 Msec=4500  True Az=112.995  Ze=-150.24  Az status=0008  Ze status=0009
05:36:56 Check angles
05:36:56 SkyScan query
05:36:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.06<-23404  Statuses=0008 0009
05:36:57 Msec=5250  True Az=112.995  Ze=-171.06  Az status=0008  Ze status=0009
05:36:57 Check angles
05:36:57 SkyScan query
05:36:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:36:57 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:36:57 Message to Master queued w/err=0: serial=345868 error=0
05:37:02 Received message from Master: op=Filter serial=345869
05:37:02 Color wheel filter change from 0 to 0
05:37:02 FLIGetFilterPos err=0  currentPosition=0
05:37:02 FLIGetStepsRemaining err=0  RemainingSteps=0
05:37:02 Filter is already there-color wheel unchanged
05:37:02 Received message from Master: op=Shutter serial=345870
05:37:02 Shutter LASER open
05:37:03 Received message from Camera: op=State serial=345872
05:37:03 GetSingleValue result=40  Value=cccccccc
05:37:03 SkyScan query
05:37:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:37:03 Parameters OK
05:37:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:37:03 Set A/D data flow result=40
05:37:03 Set A/D channel type result=40
05:37:03 Set A/D encoding result=40
05:37:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:37:03 Set channel filter=0.000000e+000  result=40
05:37:03 Config A/D  Result=40
05:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:37:03 Get A/D filter: -9.255963e+061  result=40
05:37:03 Get A/D value=-858993460  result=40
05:37:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:37:03 Parameters OK
05:37:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:37:03 Set A/D data flow result=40
05:37:03 Set A/D channel type result=40
05:37:03 Set A/D encoding result=40
05:37:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:37:03 Set channel filter=0.000000e+000  result=40
05:37:03 Config A/D  Result=40
05:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:37:03 Get A/D filter: -9.255963e+061  result=40
05:37:03 Get A/D value=-858993460  result=40
05:37:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:37:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:37:03 Aux=
05:37:03 Message to Camera, serial 345872 queued
05:37:12 Received message from Master: op=Shutter serial=345882
05:37:12 Shutter LASER close
05:37:12 Received message from Master: op=PointingHead serial=345886
05:37:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:37:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:37:12 Point started: ret=0
05:37:12 point_skyscan result=0
05:37:13 Check angles
05:37:13 SkyScan query
05:37:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
05:37:14 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
05:37:14 Check angles
05:37:14 SkyScan query
05:37:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.52<-20168  Statuses=0008 0009
05:37:14 Msec=750  True Az=112.995  Ze=-122.52  Az status=0008  Ze status=0009
05:37:15 Check angles
05:37:15 SkyScan query
05:37:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.55<-18770  Statuses=0008 0009
05:37:15 Msec=1500  True Az=112.995  Ze=-101.55  Az status=0008  Ze status=0009
05:37:15 Check angles
05:37:15 SkyScan query
05:37:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.58<-17372  Statuses=0008 0009
05:37:16 Msec=2250  True Az=112.995  Ze=-80.58  Az status=0008  Ze status=0009
05:37:16 Check angles
05:37:16 SkyScan query
05:37:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.655<-15977  Statuses=0008 0009
05:37:17 Msec=3000  True Az=112.995  Ze=-59.655  Az status=0008  Ze status=0009
05:37:17 Check angles
05:37:17 SkyScan query
05:37:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.685<-14579  Statuses=0008 0009
05:37:17 Msec=3750  True Az=112.995  Ze=-38.685  Az status=0008  Ze status=0009
05:37:18 Check angles
05:37:18 SkyScan query
05:37:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.715<-13181  Statuses=0008 0009
05:37:18 Msec=4500  True Az=112.995  Ze=-17.715  Az status=0008  Ze status=0009
05:37:18 Check angles
05:37:18 SkyScan query
05:37:19 SkyScan query done: ret=0  az=112.995<-7533  ze=3.24<-11784  Statuses=0008 0009
05:37:19 Msec=5250  True Az=112.995  Ze=3.24  Az status=0008  Ze status=0009
05:37:19 Check angles
05:37:19 SkyScan query
05:37:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:37:20 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:37:20 Message to Master queued w/err=0: serial=345886 error=0
05:37:25 Received message from Master: op=Filter serial=345887
05:37:25 Color wheel filter change from 0 to 0
05:37:25 FLIGetFilterPos err=0  currentPosition=0
05:37:25 FLIGetStepsRemaining err=0  RemainingSteps=0
05:37:25 Filter is already there-color wheel unchanged
05:37:25 Received message from Master: op=Shutter serial=345888
05:37:25 Shutter LASER close
05:37:25 Received message from Camera: op=State serial=345890
05:37:25 GetSingleValue result=40  Value=cccccccc
05:37:25 SkyScan query
05:37:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:37:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:37:26 Parameters OK
05:37:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:37:26 Set A/D data flow result=40
05:37:26 Set A/D channel type result=40
05:37:26 Set A/D encoding result=40
05:37:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:37:26 Set channel filter=0.000000e+000  result=40
05:37:26 Config A/D  Result=40
05:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:37:26 Get A/D filter: -9.255963e+061  result=40
05:37:26 Get A/D value=-858993460  result=40
05:37:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:37:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:37:26 Parameters OK
05:37:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:37:26 Set A/D data flow result=40
05:37:26 Set A/D channel type result=40
05:37:26 Set A/D encoding result=40
05:37:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:37:26 Set channel filter=0.000000e+000  result=40
05:37:26 Config A/D  Result=40
05:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:37:26 Get A/D filter: -9.255963e+061  result=40
05:37:26 Get A/D value=-858993460  result=40
05:37:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:37:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:37:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:37:26 Aux=
05:37:26 Message to Camera, serial 345890 queued
05:38:02 Received message from Master: op=PointingHead serial=345903
05:38:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:38:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:38:03 Point started: ret=0
05:38:03 point_skyscan result=0
05:38:04 Check angles
05:38:04 SkyScan query
05:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:38:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:38:04 Message to Master queued w/err=0: serial=345903 error=0
05:38:09 Received message from Master: op=Filter serial=345904
05:38:09 Color wheel filter change from 0 to 0
05:38:09 FLIGetFilterPos err=0  currentPosition=0
05:38:09 FLIGetStepsRemaining err=0  RemainingSteps=0
05:38:09 Filter is already there-color wheel unchanged
05:38:09 Received message from Master: op=Shutter serial=345905
05:38:09 Shutter LASER close
05:38:09 Received message from Camera: op=State serial=345907
05:38:09 GetSingleValue result=40  Value=cccccccc
05:38:09 SkyScan query
05:38:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:38:10 Parameters OK
05:38:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:38:10 Set A/D data flow result=40
05:38:10 Set A/D channel type result=40
05:38:10 Set A/D encoding result=40
05:38:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:38:10 Set channel filter=0.000000e+000  result=40
05:38:10 Config A/D  Result=40
05:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:38:10 Get A/D filter: -9.255963e+061  result=40
05:38:10 Get A/D value=-858993460  result=40
05:38:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:38:10 Parameters OK
05:38:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:38:10 Set A/D data flow result=40
05:38:10 Set A/D channel type result=40
05:38:10 Set A/D encoding result=40
05:38:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:38:10 Set channel filter=0.000000e+000  result=40
05:38:10 Config A/D  Result=40
05:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:38:10 Get A/D filter: -9.255963e+061  result=40
05:38:10 Get A/D value=-858993460  result=40
05:38:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:38:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:38:10 Aux=
05:38:10 Message to Camera, serial 345907 queued
05:38:46 Received message from Master: op=PointingHead serial=345919
05:38:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:38:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:38:46 Point started: ret=0
05:38:46 point_skyscan result=0
05:38:47 Check angles
05:38:47 SkyScan query
05:38:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:38:48 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:38:48 Message to Master queued w/err=0: serial=345919 error=0
05:38:53 Received message from Master: op=Filter serial=345920
05:38:53 Color wheel filter change from 0 to 0
05:38:53 FLIGetFilterPos err=0  currentPosition=0
05:38:53 FLIGetStepsRemaining err=0  RemainingSteps=0
05:38:53 Filter is already there-color wheel unchanged
05:38:53 Received message from Master: op=Shutter serial=345921
05:38:53 Shutter LASER close
05:38:53 Received message from Camera: op=State serial=345923
05:38:53 GetSingleValue result=40  Value=cccccccc
05:38:53 SkyScan query
05:38:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:38:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:38:53 Parameters OK
05:38:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:38:53 Set A/D data flow result=40
05:38:53 Set A/D channel type result=40
05:38:53 Set A/D encoding result=40
05:38:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:38:53 Set channel filter=0.000000e+000  result=40
05:38:53 Config A/D  Result=40
05:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:38:53 Get A/D filter: -9.255963e+061  result=40
05:38:53 Get A/D value=-858993460  result=40
05:38:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:38:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:38:53 Parameters OK
05:38:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:38:53 Set A/D data flow result=40
05:38:53 Set A/D channel type result=40
05:38:53 Set A/D encoding result=40
05:38:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:38:53 Set channel filter=0.000000e+000  result=40
05:38:53 Config A/D  Result=40
05:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:38:53 Get A/D filter: -9.255963e+061  result=40
05:38:53 Get A/D value=-858993460  result=40
05:38:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:38:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:38:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:38:53 Aux=
05:38:53 Message to Camera, serial 345923 queued
05:39:30 Received message from Master: op=PointingHead serial=345936
05:39:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:39:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:39:31 Point started: ret=0
05:39:31 point_skyscan result=0
05:39:31 Check angles
05:39:31 SkyScan query
05:39:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:39:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:39:32 Message to Master queued w/err=0: serial=345936 error=0
05:39:37 Received message from Master: op=Filter serial=345937
05:39:37 Color wheel filter change from 0 to 0
05:39:37 FLIGetFilterPos err=0  currentPosition=0
05:39:37 FLIGetStepsRemaining err=0  RemainingSteps=0
05:39:37 Filter is already there-color wheel unchanged
05:39:37 Received message from Master: op=Shutter serial=345938
05:39:37 Shutter LASER close
05:39:37 Received message from Camera: op=State serial=345940
05:39:37 GetSingleValue result=40  Value=cccccccc
05:39:37 SkyScan query
05:39:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:39:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:39:38 Parameters OK
05:39:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:39:38 Set A/D data flow result=40
05:39:38 Set A/D channel type result=40
05:39:38 Set A/D encoding result=40
05:39:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:39:38 Set channel filter=0.000000e+000  result=40
05:39:38 Config A/D  Result=40
05:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:39:38 Get A/D filter: -9.255963e+061  result=40
05:39:38 Get A/D value=-858993460  result=40
05:39:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:39:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:39:38 Parameters OK
05:39:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:39:38 Set A/D data flow result=40
05:39:38 Set A/D channel type result=40
05:39:38 Set A/D encoding result=40
05:39:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:39:38 Set channel filter=0.000000e+000  result=40
05:39:38 Config A/D  Result=40
05:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:39:38 Get A/D filter: -9.255963e+061  result=40
05:39:38 Get A/D value=-858993460  result=40
05:39:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:39:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:39:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:39:38 Aux=
05:39:38 Message to Camera, serial 345940 queued
05:40:15 Received message from Master: op=PointingHead serial=345953
05:40:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:40:15 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:40:15 Point started: ret=0
05:40:15 point_skyscan result=0
05:40:16 Check angles
05:40:16 SkyScan query
05:40:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.25<-13550  Statuses=0008 0009
05:40:16 Msec=0  True Az=112.995  Ze=-23.25  Az status=0008  Ze status=0009
05:40:16 Check angles
05:40:16 SkyScan query
05:40:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.22<-14948  Statuses=0008 0009
05:40:17 Msec=750  True Az=112.995  Ze=-44.22  Az status=0008  Ze status=0009
05:40:17 Check angles
05:40:17 SkyScan query
05:40:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.595<-16373  Statuses=0008 0009
05:40:18 Msec=1500  True Az=112.995  Ze=-65.595  Az status=0008  Ze status=0009
05:40:18 Check angles
05:40:18 SkyScan query
05:40:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.565<-17771  Statuses=0008 0009
05:40:18 Msec=2250  True Az=112.995  Ze=-86.565  Az status=0008  Ze status=0009
05:40:19 Check angles
05:40:19 SkyScan query
05:40:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.505<-19167  Statuses=0008 0009
05:40:19 Msec=3000  True Az=112.995  Ze=-107.505  Az status=0008  Ze status=0009
05:40:19 Check angles
05:40:19 SkyScan query
05:40:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.895<-20593  Statuses=0008 0009
05:40:20 Msec=3750  True Az=112.995  Ze=-128.895  Az status=0008  Ze status=0009
05:40:20 Check angles
05:40:20 SkyScan query
05:40:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.285<-22019  Statuses=0008 0009
05:40:21 Msec=4500  True Az=112.995  Ze=-150.285  Az status=0008  Ze status=0009
05:40:21 Check angles
05:40:21 SkyScan query
05:40:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.09<-23406  Statuses=0008 0009
05:40:21 Msec=5250  True Az=112.995  Ze=-171.09  Az status=0008  Ze status=0009
05:40:22 Check angles
05:40:22 SkyScan query
05:40:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:40:22 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:40:22 Message to Master queued w/err=0: serial=345953 error=0
05:40:27 Received message from Master: op=Filter serial=345954
05:40:27 Color wheel filter change from 0 to 0
05:40:27 FLIGetFilterPos err=0  currentPosition=0
05:40:27 FLIGetStepsRemaining err=0  RemainingSteps=0
05:40:27 Filter is already there-color wheel unchanged
05:40:27 Received message from Master: op=Shutter serial=345955
05:40:27 Shutter LASER open
05:40:28 Received message from Camera: op=State serial=345957
05:40:28 GetSingleValue result=40  Value=cccccccc
05:40:28 SkyScan query
05:40:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:40:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:28 Parameters OK
05:40:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:28 Set A/D data flow result=40
05:40:28 Set A/D channel type result=40
05:40:28 Set A/D encoding result=40
05:40:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:28 Set channel filter=0.000000e+000  result=40
05:40:28 Config A/D  Result=40
05:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:28 Get A/D filter: -9.255963e+061  result=40
05:40:28 Get A/D value=-858993460  result=40
05:40:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:28 Parameters OK
05:40:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:28 Set A/D data flow result=40
05:40:28 Set A/D channel type result=40
05:40:28 Set A/D encoding result=40
05:40:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:28 Set channel filter=0.000000e+000  result=40
05:40:28 Config A/D  Result=40
05:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:28 Get A/D filter: -9.255963e+061  result=40
05:40:28 Get A/D value=-858993460  result=40
05:40:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:40:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:40:28 Aux=
05:40:28 Message to Camera, serial 345957 queued
05:40:37 Received message from Master: op=Shutter serial=345967
05:40:37 Shutter LASER close
05:40:37 Received message from Master: op=PointingHead serial=345971
05:40:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:40:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:40:37 Point started: ret=0
05:40:37 point_skyscan result=0
05:40:38 Check angles
05:40:38 SkyScan query
05:40:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
05:40:39 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
05:40:39 Check angles
05:40:39 SkyScan query
05:40:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.695<-20113  Statuses=0008 0009
05:40:40 Msec=750  True Az=112.995  Ze=-121.695  Az status=0008  Ze status=0009
05:40:40 Check angles
05:40:40 SkyScan query
05:40:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
05:40:40 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
05:40:40 Check angles
05:40:40 SkyScan query
05:40:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.815<-17321  Statuses=0008 0009
05:40:41 Msec=2250  True Az=112.995  Ze=-79.815  Az status=0008  Ze status=0009
05:40:41 Check angles
05:40:41 SkyScan query
05:40:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.395<-15893  Statuses=0008 0009
05:40:42 Msec=3000  True Az=112.995  Ze=-58.395  Az status=0008  Ze status=0009
05:40:42 Check angles
05:40:42 SkyScan query
05:40:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.02<-14468  Statuses=0008 0009
05:40:43 Msec=3750  True Az=112.995  Ze=-37.02  Az status=0008  Ze status=0009
05:40:43 Check angles
05:40:43 SkyScan query
05:40:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.05<-13070  Statuses=0008 0009
05:40:43 Msec=4500  True Az=112.995  Ze=-16.05  Az status=0008  Ze status=0009
05:40:44 Check angles
05:40:44 SkyScan query
05:40:44 SkyScan query done: ret=0  az=112.995<-7533  ze=4.71<-11686  Statuses=0008 0009
05:40:44 Msec=5250  True Az=112.995  Ze=4.71  Az status=0008  Ze status=0009
05:40:44 Check angles
05:40:44 SkyScan query
05:40:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:40:45 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:40:45 Message to Master queued w/err=0: serial=345971 error=0
05:40:50 Received message from Master: op=Filter serial=345972
05:40:50 Color wheel filter change from 0 to 0
05:40:50 FLIGetFilterPos err=0  currentPosition=0
05:40:50 FLIGetStepsRemaining err=0  RemainingSteps=0
05:40:50 Filter is already there-color wheel unchanged
05:40:50 Received message from Master: op=Shutter serial=345973
05:40:50 Shutter LASER close
05:40:50 Received message from Camera: op=State serial=345975
05:40:50 GetSingleValue result=40  Value=cccccccc
05:40:50 SkyScan query
05:40:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:40:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:51 Parameters OK
05:40:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:51 Set A/D data flow result=40
05:40:51 Set A/D channel type result=40
05:40:51 Set A/D encoding result=40
05:40:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:51 Set channel filter=0.000000e+000  result=40
05:40:51 Config A/D  Result=40
05:40:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:51 Get A/D filter: -9.255963e+061  result=40
05:40:51 Get A/D value=-858993460  result=40
05:40:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:51 Parameters OK
05:40:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:51 Set A/D data flow result=40
05:40:51 Set A/D channel type result=40
05:40:51 Set A/D encoding result=40
05:40:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:51 Set channel filter=0.000000e+000  result=40
05:40:51 Config A/D  Result=40
05:40:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:51 Get A/D filter: -9.255963e+061  result=40
05:40:51 Get A/D value=-858993460  result=40
05:40:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:40:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:40:51 Aux=
05:40:51 Message to Camera, serial 345975 queued
05:41:28 Received message from Master: op=PointingHead serial=345988
05:41:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:41:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:41:28 Point started: ret=0
05:41:28 point_skyscan result=0
05:41:29 Check angles
05:41:29 SkyScan query
05:41:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:41:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:41:29 Message to Master queued w/err=0: serial=345988 error=0
05:41:34 Received message from Master: op=Filter serial=345989
05:41:34 Color wheel filter change from 0 to 0
05:41:34 FLIGetFilterPos err=0  currentPosition=0
05:41:34 FLIGetStepsRemaining err=0  RemainingSteps=0
05:41:34 Filter is already there-color wheel unchanged
05:41:34 Received message from Master: op=Shutter serial=345990
05:41:34 Shutter LASER close
05:41:34 Received message from Camera: op=State serial=345992
05:41:34 GetSingleValue result=40  Value=cccccccc
05:41:34 SkyScan query
05:41:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:41:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:41:35 Parameters OK
05:41:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:41:35 Set A/D data flow result=40
05:41:35 Set A/D channel type result=40
05:41:35 Set A/D encoding result=40
05:41:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:41:35 Set channel filter=0.000000e+000  result=40
05:41:35 Config A/D  Result=40
05:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:41:35 Get A/D filter: -9.255963e+061  result=40
05:41:35 Get A/D value=-858993460  result=40
05:41:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:41:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:41:35 Parameters OK
05:41:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:41:35 Set A/D data flow result=40
05:41:35 Set A/D channel type result=40
05:41:35 Set A/D encoding result=40
05:41:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:41:35 Set channel filter=0.000000e+000  result=40
05:41:35 Config A/D  Result=40
05:41:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:41:35 Get A/D filter: -9.255963e+061  result=40
05:41:35 Get A/D value=-858993460  result=40
05:41:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:41:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:41:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:41:35 Aux=
05:41:35 Message to Camera, serial 345992 queued
05:42:11 Received message from Master: op=PointingHead serial=346004
05:42:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:42:11 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:42:11 Point started: ret=0
05:42:11 point_skyscan result=0
05:42:12 Check angles
05:42:12 SkyScan query
05:42:13 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.51<-12434  Statuses=0009 0008
05:42:13 Msec=0  True Az=135.9  Ze=-6.51  Az status=0009  Ze status=0008
05:42:13 Check angles
05:42:13 SkyScan query
05:42:13 SkyScan query done: ret=0  az=153.78<-10252  ze=-6.495<-12433  Statuses=0009 0008
05:42:13 Msec=750  True Az=153.78  Ze=-6.495  Az status=0009  Ze status=0008
05:42:14 Check angles
05:42:14 SkyScan query
05:42:14 SkyScan query done: ret=0  az=171.255<-11417  ze=-6.495<-12433  Statuses=0009 0008
05:42:14 Msec=1500  True Az=171.255  Ze=-6.495  Az status=0009  Ze status=0008
05:42:14 Check angles
05:42:14 SkyScan query
05:42:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:42:15 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:42:15 Message to Master queued w/err=0: serial=346004 error=0
05:42:20 Received message from Master: op=Filter serial=346005
05:42:20 Color wheel filter change from 0 to 0
05:42:20 FLIGetFilterPos err=0  currentPosition=0
05:42:20 FLIGetStepsRemaining err=0  RemainingSteps=0
05:42:20 Filter is already there-color wheel unchanged
05:42:20 Received message from Master: op=Shutter serial=346006
05:42:20 Shutter LASER close
05:42:20 Received message from Camera: op=State serial=346008
05:42:20 GetSingleValue result=40  Value=cccccccc
05:42:20 SkyScan query
05:42:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:42:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:42:21 Parameters OK
05:42:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:42:21 Set A/D data flow result=40
05:42:21 Set A/D channel type result=40
05:42:21 Set A/D encoding result=40
05:42:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:42:21 Set channel filter=0.000000e+000  result=40
05:42:21 Config A/D  Result=40
05:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:42:21 Get A/D filter: -9.255963e+061  result=40
05:42:21 Get A/D value=-858993460  result=40
05:42:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:42:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:42:21 Parameters OK
05:42:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:42:21 Set A/D data flow result=40
05:42:21 Set A/D channel type result=40
05:42:21 Set A/D encoding result=40
05:42:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:42:21 Set channel filter=0.000000e+000  result=40
05:42:21 Config A/D  Result=40
05:42:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:42:21 Get A/D filter: -9.255963e+061  result=40
05:42:21 Get A/D value=-858993460  result=40
05:42:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:42:21 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:42:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:42:21 Aux=
05:42:21 Message to Camera, serial 346008 queued
05:42:57 Received message from Master: op=PointingHead serial=346021
05:42:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:42:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:42:58 Point started: ret=0
05:42:58 point_skyscan result=0
05:42:59 Check angles
05:42:59 SkyScan query
05:42:59 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
05:42:59 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
05:42:59 Check angles
05:42:59 SkyScan query
05:43:00 SkyScan query done: ret=0  az=135.285<-9019  ze=6.495<-11567  Statuses=0009 0008
05:43:00 Msec=750  True Az=135.285  Ze=6.495  Az status=0009  Ze status=0008
05:43:00 Check angles
05:43:00 SkyScan query
05:43:01 SkyScan query done: ret=0  az=117.9<-7860  ze=6.495<-11567  Statuses=0009 0008
05:43:01 Msec=1500  True Az=117.9  Ze=6.495  Az status=0009  Ze status=0008
05:43:01 Check angles
05:43:01 SkyScan query
05:43:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:43:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:43:01 Message to Master queued w/err=0: serial=346021 error=0
05:43:06 Received message from Master: op=Filter serial=346022
05:43:06 Color wheel filter change from 0 to 0
05:43:06 FLIGetFilterPos err=0  currentPosition=0
05:43:06 FLIGetStepsRemaining err=0  RemainingSteps=0
05:43:06 Filter is already there-color wheel unchanged
05:43:07 Received message from Master: op=Shutter serial=346023
05:43:07 Shutter LASER close
05:43:07 Received message from Camera: op=State serial=346025
05:43:07 GetSingleValue result=40  Value=cccccccc
05:43:07 SkyScan query
05:43:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:43:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:07 Parameters OK
05:43:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:07 Set A/D data flow result=40
05:43:07 Set A/D channel type result=40
05:43:07 Set A/D encoding result=40
05:43:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:07 Set channel filter=0.000000e+000  result=40
05:43:07 Config A/D  Result=40
05:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:07 Get A/D filter: -9.255963e+061  result=40
05:43:07 Get A/D value=-858993460  result=40
05:43:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:07 Parameters OK
05:43:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:07 Set A/D data flow result=40
05:43:07 Set A/D channel type result=40
05:43:07 Set A/D encoding result=40
05:43:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:07 Set channel filter=0.000000e+000  result=40
05:43:07 Config A/D  Result=40
05:43:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:07 Get A/D filter: -9.255963e+061  result=40
05:43:07 Get A/D value=-858993460  result=40
05:43:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:43:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:43:07 Aux=
05:43:07 Message to Camera, serial 346025 queued
05:43:44 Received message from Master: op=PointingHead serial=346038
05:43:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:43:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:43:45 Point started: ret=0
05:43:45 point_skyscan result=0
05:43:45 Check angles
05:43:45 SkyScan query
05:43:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
05:43:46 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
05:43:46 Check angles
05:43:46 SkyScan query
05:43:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
05:43:47 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
05:43:47 Check angles
05:43:47 SkyScan query
05:43:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.085<-16339  Statuses=0008 0009
05:43:47 Msec=1500  True Az=112.995  Ze=-65.085  Az status=0008  Ze status=0009
05:43:48 Check angles
05:43:48 SkyScan query
05:43:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.025<-17735  Statuses=0008 0009
05:43:48 Msec=2250  True Az=112.995  Ze=-86.025  Az status=0008  Ze status=0009
[UTC 2019-3-19  05:43:48]
05:43:48 Check angles
05:43:48 SkyScan query
05:43:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.965<-19131  Statuses=0008 0009
05:43:49 Msec=3000  True Az=112.995  Ze=-106.965  Az status=0008  Ze status=0009
05:43:49 Check angles
05:43:49 SkyScan query
05:43:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
05:43:50 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
05:43:50 Check angles
05:43:50 SkyScan query
05:43:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.89<-21926  Statuses=0008 0009
05:43:50 Msec=4500  True Az=112.995  Ze=-148.89  Az status=0008  Ze status=0009
05:43:51 Check angles
05:43:51 SkyScan query
05:43:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.83<-23322  Statuses=0008 0009
05:43:51 Msec=5250  True Az=112.995  Ze=-169.83  Az status=0008  Ze status=0009
05:43:51 Check angles
05:43:51 SkyScan query
05:43:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:43:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:43:52 Message to Master queued w/err=0: serial=346038 error=0
05:43:57 Received message from Master: op=Filter serial=346039
05:43:57 Color wheel filter change from 0 to 0
05:43:57 FLIGetFilterPos err=0  currentPosition=0
05:43:57 FLIGetStepsRemaining err=0  RemainingSteps=0
05:43:57 Filter is already there-color wheel unchanged
05:43:57 Received message from Master: op=Shutter serial=346040
05:43:57 Shutter LASER open
05:43:57 Received message from Camera: op=State serial=346042
05:43:57 GetSingleValue result=40  Value=cccccccc
05:43:57 SkyScan query
05:43:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:43:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:58 Parameters OK
05:43:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:58 Set A/D data flow result=40
05:43:58 Set A/D channel type result=40
05:43:58 Set A/D encoding result=40
05:43:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:58 Set channel filter=0.000000e+000  result=40
05:43:58 Config A/D  Result=40
05:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:58 Get A/D filter: -9.255963e+061  result=40
05:43:58 Get A/D value=-858993460  result=40
05:43:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:58 Parameters OK
05:43:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:58 Set A/D data flow result=40
05:43:58 Set A/D channel type result=40
05:43:58 Set A/D encoding result=40
05:43:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:58 Set channel filter=0.000000e+000  result=40
05:43:58 Config A/D  Result=40
05:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:58 Get A/D filter: -9.255963e+061  result=40
05:43:58 Get A/D value=-858993460  result=40
05:43:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:43:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:43:58 Aux=
05:43:58 Message to Camera, serial 346042 queued
05:44:06 Received message from Master: op=Shutter serial=346052
05:44:06 Shutter LASER close
05:44:07 Received message from Master: op=PointingHead serial=346056
05:44:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:44:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:44:07 Point started: ret=0
05:44:07 point_skyscan result=0
05:44:08 Check angles
05:44:08 SkyScan query
05:44:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
05:44:08 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
05:44:08 Check angles
05:44:08 SkyScan query
05:44:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.905<-20127  Statuses=0008 0009
05:44:09 Msec=750  True Az=112.995  Ze=-121.905  Az status=0008  Ze status=0009
05:44:09 Check angles
05:44:09 SkyScan query
05:44:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.965<-18731  Statuses=0008 0009
05:44:10 Msec=1500  True Az=112.995  Ze=-100.965  Az status=0008  Ze status=0009
05:44:10 Check angles
05:44:10 SkyScan query
05:44:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.04<-17336  Statuses=0008 0009
05:44:11 Msec=2250  True Az=112.995  Ze=-80.04  Az status=0008  Ze status=0009
05:44:11 Check angles
05:44:11 SkyScan query
05:44:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.07<-15938  Statuses=0008 0009
05:44:11 Msec=3000  True Az=112.995  Ze=-59.07  Az status=0008  Ze status=0009
05:44:11 Check angles
05:44:11 SkyScan query
05:44:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.085<-14539  Statuses=0008 0009
05:44:12 Msec=3750  True Az=112.995  Ze=-38.085  Az status=0008  Ze status=0009
05:44:12 Check angles
05:44:12 SkyScan query
05:44:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.145<-13143  Statuses=0008 0009
05:44:13 Msec=4500  True Az=112.995  Ze=-17.145  Az status=0008  Ze status=0009
05:44:13 Check angles
05:44:13 SkyScan query
05:44:14 SkyScan query done: ret=0  az=112.995<-7533  ze=3.825<-11745  Statuses=0008 0009
05:44:14 Msec=5250  True Az=112.995  Ze=3.825  Az status=0008  Ze status=0009
05:44:14 Check angles
05:44:14 SkyScan query
05:44:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:44:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:44:14 Message to Master queued w/err=0: serial=346056 error=0
05:44:19 Received message from Master: op=Filter serial=346057
05:44:19 Color wheel filter change from 0 to 0
05:44:19 FLIGetFilterPos err=0  currentPosition=0
05:44:19 FLIGetStepsRemaining err=0  RemainingSteps=0
05:44:19 Filter is already there-color wheel unchanged
05:44:19 Received message from Master: op=Shutter serial=346058
05:44:19 Shutter LASER close
05:44:20 Received message from Camera: op=State serial=346060
05:44:20 GetSingleValue result=40  Value=cccccccc
05:44:20 SkyScan query
05:44:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:44:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:44:20 Parameters OK
05:44:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:44:20 Set A/D data flow result=40
05:44:20 Set A/D channel type result=40
05:44:20 Set A/D encoding result=40
05:44:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:44:20 Set channel filter=0.000000e+000  result=40
05:44:20 Config A/D  Result=40
05:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:44:20 Get A/D filter: -9.255963e+061  result=40
05:44:20 Get A/D value=-858993460  result=40
05:44:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:44:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:44:20 Parameters OK
05:44:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:44:20 Set A/D data flow result=40
05:44:20 Set A/D channel type result=40
05:44:20 Set A/D encoding result=40
05:44:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:44:20 Set channel filter=0.000000e+000  result=40
05:44:20 Config A/D  Result=40
05:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:44:20 Get A/D filter: -9.255963e+061  result=40
05:44:20 Get A/D value=-858993460  result=40
05:44:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:44:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:44:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:44:20 Aux=
05:44:20 Message to Camera, serial 346060 queued
05:44:57 Received message from Master: op=PointingHead serial=346073
05:44:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:44:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:44:57 Point started: ret=0
05:44:57 point_skyscan result=0
05:44:58 Check angles
05:44:58 SkyScan query
05:44:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:44:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:44:59 Message to Master queued w/err=0: serial=346073 error=0
05:45:04 Received message from Master: op=Filter serial=346074
05:45:04 Color wheel filter change from 0 to 0
05:45:04 FLIGetFilterPos err=0  currentPosition=0
05:45:04 FLIGetStepsRemaining err=0  RemainingSteps=0
05:45:04 Filter is already there-color wheel unchanged
05:45:04 Received message from Master: op=Shutter serial=346075
05:45:04 Shutter LASER close
05:45:04 Received message from Camera: op=State serial=346077
05:45:04 GetSingleValue result=40  Value=cccccccc
05:45:04 SkyScan query
05:45:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:45:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:45:04 Parameters OK
05:45:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:45:04 Set A/D data flow result=40
05:45:04 Set A/D channel type result=40
05:45:04 Set A/D encoding result=40
05:45:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:45:04 Set channel filter=0.000000e+000  result=40
05:45:04 Config A/D  Result=40
05:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:45:04 Get A/D filter: -9.255963e+061  result=40
05:45:04 Get A/D value=-858993460  result=40
05:45:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:45:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:45:04 Parameters OK
05:45:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:45:04 Set A/D data flow result=40
05:45:04 Set A/D channel type result=40
05:45:04 Set A/D encoding result=40
05:45:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:45:04 Set channel filter=0.000000e+000  result=40
05:45:04 Config A/D  Result=40
05:45:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:45:04 Get A/D filter: -9.255963e+061  result=40
05:45:04 Get A/D value=-858993460  result=40
05:45:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:45:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:45:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:45:04 Aux=
05:45:04 Message to Camera, serial 346077 queued
05:45:41 Received message from Master: op=PointingHead serial=346090
05:45:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:45:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:45:42 Point started: ret=0
05:45:42 point_skyscan result=0
05:45:42 Check angles
05:45:42 SkyScan query
05:45:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:45:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:45:43 Message to Master queued w/err=0: serial=346090 error=0
05:45:48 Received message from Master: op=Filter serial=346091
05:45:48 Color wheel filter change from 0 to 0
05:45:48 FLIGetFilterPos err=0  currentPosition=0
05:45:48 FLIGetStepsRemaining err=0  RemainingSteps=0
05:45:48 Filter is already there-color wheel unchanged
05:45:48 Received message from Master: op=Shutter serial=346092
05:45:48 Shutter LASER close
05:45:48 Received message from Camera: op=State serial=346094
05:45:48 GetSingleValue result=40  Value=cccccccc
05:45:48 SkyScan query
05:45:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:45:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:45:49 Parameters OK
05:45:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:45:49 Set A/D data flow result=40
05:45:49 Set A/D channel type result=40
05:45:49 Set A/D encoding result=40
05:45:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:45:49 Set channel filter=0.000000e+000  result=40
05:45:49 Config A/D  Result=40
05:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:45:49 Get A/D filter: -9.255963e+061  result=40
05:45:49 Get A/D value=-858993460  result=40
05:45:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:45:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:45:49 Parameters OK
05:45:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:45:49 Set A/D data flow result=40
05:45:49 Set A/D channel type result=40
05:45:49 Set A/D encoding result=40
05:45:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:45:49 Set channel filter=0.000000e+000  result=40
05:45:49 Config A/D  Result=40
05:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:45:49 Get A/D filter: -9.255963e+061  result=40
05:45:49 Get A/D value=-858993460  result=40
05:45:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:45:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:45:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:45:49 Aux=
05:45:49 Message to Camera, serial 346094 queued
05:46:26 Received message from Master: op=PointingHead serial=346107
05:46:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:46:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:46:26 Point started: ret=0
05:46:26 point_skyscan result=0
05:46:27 Check angles
05:46:27 SkyScan query
05:46:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:46:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:46:27 Message to Master queued w/err=0: serial=346107 error=0
05:46:32 Received message from Master: op=Filter serial=346108
05:46:32 Color wheel filter change from 0 to 0
05:46:32 FLIGetFilterPos err=0  currentPosition=0
05:46:32 FLIGetStepsRemaining err=0  RemainingSteps=0
05:46:32 Filter is already there-color wheel unchanged
05:46:32 Received message from Master: op=Shutter serial=346109
05:46:32 Shutter LASER close
05:46:33 Received message from Camera: op=State serial=346111
05:46:33 GetSingleValue result=40  Value=cccccccc
05:46:33 SkyScan query
05:46:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:46:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:46:33 Parameters OK
05:46:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:46:33 Set A/D data flow result=40
05:46:33 Set A/D channel type result=40
05:46:33 Set A/D encoding result=40
05:46:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:46:33 Set channel filter=0.000000e+000  result=40
05:46:33 Config A/D  Result=40
05:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:46:33 Get A/D filter: -9.255963e+061  result=40
05:46:33 Get A/D value=-858993460  result=40
05:46:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:46:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:46:33 Parameters OK
05:46:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:46:33 Set A/D data flow result=40
05:46:33 Set A/D channel type result=40
05:46:33 Set A/D encoding result=40
05:46:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:46:33 Set channel filter=0.000000e+000  result=40
05:46:33 Config A/D  Result=40
05:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:46:33 Get A/D filter: -9.255963e+061  result=40
05:46:33 Get A/D value=-858993460  result=40
05:46:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:46:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:46:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:46:33 Aux=
05:46:33 Message to Camera, serial 346111 queued
05:47:10 Received message from Master: op=PointingHead serial=346124
05:47:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:47:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:47:10 Point started: ret=0
05:47:10 point_skyscan result=0
05:47:11 Check angles
05:47:11 SkyScan query
05:47:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
05:47:12 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
05:47:12 Check angles
05:47:12 SkyScan query
05:47:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
05:47:12 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
05:47:13 Check angles
05:47:13 SkyScan query
05:47:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
05:47:13 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
05:47:13 Check angles
05:47:13 SkyScan query
05:47:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
05:47:14 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
05:47:14 Check angles
05:47:14 SkyScan query
05:47:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
05:47:15 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
05:47:15 Check angles
05:47:15 SkyScan query
05:47:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.565<-20571  Statuses=0008 0009
05:47:15 Msec=3750  True Az=112.995  Ze=-128.565  Az status=0008  Ze status=0009
05:47:16 Check angles
05:47:16 SkyScan query
05:47:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.97<-21998  Statuses=0008 0009
05:47:16 Msec=4500  True Az=112.995  Ze=-149.97  Az status=0008  Ze status=0009
05:47:16 Check angles
05:47:16 SkyScan query
05:47:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
05:47:17 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
05:47:17 Check angles
05:47:17 SkyScan query
05:47:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:47:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:47:18 Message to Master queued w/err=0: serial=346124 error=0
05:47:23 Received message from Master: op=Filter serial=346125
05:47:23 Color wheel filter change from 0 to 0
05:47:23 FLIGetFilterPos err=0  currentPosition=0
05:47:23 FLIGetStepsRemaining err=0  RemainingSteps=0
05:47:23 Filter is already there-color wheel unchanged
05:47:23 Received message from Master: op=Shutter serial=346126
05:47:23 Shutter LASER open
05:47:23 Received message from Camera: op=State serial=346128
05:47:23 GetSingleValue result=40  Value=cccccccc
05:47:23 SkyScan query
05:47:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:47:24 Parameters OK
05:47:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:47:24 Set A/D data flow result=40
05:47:24 Set A/D channel type result=40
05:47:24 Set A/D encoding result=40
05:47:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:47:24 Set channel filter=0.000000e+000  result=40
05:47:24 Config A/D  Result=40
05:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:47:24 Get A/D filter: -9.255963e+061  result=40
05:47:24 Get A/D value=-858993460  result=40
05:47:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:47:24 Parameters OK
05:47:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:47:24 Set A/D data flow result=40
05:47:24 Set A/D channel type result=40
05:47:24 Set A/D encoding result=40
05:47:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:47:24 Set channel filter=0.000000e+000  result=40
05:47:24 Config A/D  Result=40
05:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:47:24 Get A/D filter: -9.255963e+061  result=40
05:47:24 Get A/D value=-858993460  result=40
05:47:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:47:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:47:24 Aux=
05:47:24 Message to Camera, serial 346128 queued
05:47:32 Received message from Master: op=Shutter serial=346138
05:47:32 Shutter LASER close
05:47:33 Received message from Master: op=PointingHead serial=346142
05:47:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:47:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:47:33 Point started: ret=0
05:47:33 point_skyscan result=0
05:47:34 Check angles
05:47:34 SkyScan query
05:47:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
05:47:34 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
05:47:35 Check angles
05:47:35 SkyScan query
05:47:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.905<-20127  Statuses=0008 0009
05:47:35 Msec=750  True Az=112.995  Ze=-121.905  Az status=0008  Ze status=0009
05:47:35 Check angles
05:47:35 SkyScan query
05:47:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.965<-18731  Statuses=0008 0009
05:47:36 Msec=1500  True Az=112.995  Ze=-100.965  Az status=0008  Ze status=0009
05:47:36 Check angles
05:47:36 SkyScan query
05:47:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.025<-17335  Statuses=0008 0009
05:47:37 Msec=2250  True Az=112.995  Ze=-80.025  Az status=0008  Ze status=0009
05:47:37 Check angles
05:47:37 SkyScan query
05:47:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.07<-15938  Statuses=0008 0009
05:47:37 Msec=3000  True Az=112.995  Ze=-59.07  Az status=0008  Ze status=0009
05:47:38 Check angles
05:47:38 SkyScan query
05:47:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.085<-14539  Statuses=0008 0009
05:47:38 Msec=3750  True Az=112.995  Ze=-38.085  Az status=0008  Ze status=0009
05:47:38 Check angles
05:47:38 SkyScan query
05:47:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.145<-13143  Statuses=0008 0009
05:47:39 Msec=4500  True Az=112.995  Ze=-17.145  Az status=0008  Ze status=0009
05:47:39 Check angles
05:47:39 SkyScan query
05:47:40 SkyScan query done: ret=0  az=112.995<-7533  ze=3.825<-11745  Statuses=0008 0009
05:47:40 Msec=5250  True Az=112.995  Ze=3.825  Az status=0008  Ze status=0009
05:47:40 Check angles
05:47:40 SkyScan query
05:47:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:47:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:47:40 Message to Master queued w/err=0: serial=346142 error=0
05:47:45 Received message from Master: op=Filter serial=346143
05:47:45 Color wheel filter change from 0 to 0
05:47:45 FLIGetFilterPos err=0  currentPosition=0
05:47:45 FLIGetStepsRemaining err=0  RemainingSteps=0
05:47:45 Filter is already there-color wheel unchanged
05:47:46 Received message from Master: op=Shutter serial=346144
05:47:46 Shutter LASER close
05:47:46 Received message from Camera: op=State serial=346146
05:47:46 GetSingleValue result=40  Value=cccccccc
05:47:46 SkyScan query
05:47:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:47:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:47:46 Parameters OK
05:47:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:47:46 Set A/D data flow result=40
05:47:46 Set A/D channel type result=40
05:47:46 Set A/D encoding result=40
05:47:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:47:46 Set channel filter=0.000000e+000  result=40
05:47:46 Config A/D  Result=40
05:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:47:46 Get A/D filter: -9.255963e+061  result=40
05:47:46 Get A/D value=-858993460  result=40
05:47:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:47:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:47:46 Parameters OK
05:47:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:47:46 Set A/D data flow result=40
05:47:46 Set A/D channel type result=40
05:47:46 Set A/D encoding result=40
05:47:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:47:46 Set channel filter=0.000000e+000  result=40
05:47:46 Config A/D  Result=40
05:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:47:46 Get A/D filter: -9.255963e+061  result=40
05:47:46 Get A/D value=-858993460  result=40
05:47:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:47:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:47:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:47:46 Aux=
05:47:46 Message to Camera, serial 346146 queued
05:48:23 Received message from Master: op=PointingHead serial=346159
05:48:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:48:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:48:23 Point started: ret=0
05:48:23 point_skyscan result=0
05:48:24 Check angles
05:48:24 SkyScan query
05:48:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:48:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:48:25 Message to Master queued w/err=0: serial=346159 error=0
05:48:30 Received message from Master: op=Filter serial=346160
05:48:30 Color wheel filter change from 0 to 0
05:48:30 FLIGetFilterPos err=0  currentPosition=0
05:48:30 FLIGetStepsRemaining err=0  RemainingSteps=0
05:48:30 Filter is already there-color wheel unchanged
05:48:30 Received message from Master: op=Shutter serial=346161
05:48:30 Shutter LASER close
05:48:30 Received message from Camera: op=State serial=346163
05:48:30 GetSingleValue result=40  Value=cccccccc
05:48:30 SkyScan query
05:48:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:48:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:48:31 Parameters OK
05:48:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:48:31 Set A/D data flow result=40
05:48:31 Set A/D channel type result=40
05:48:31 Set A/D encoding result=40
05:48:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:48:31 Set channel filter=0.000000e+000  result=40
05:48:31 Config A/D  Result=40
05:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:48:31 Get A/D filter: -9.255963e+061  result=40
05:48:31 Get A/D value=-858993460  result=40
05:48:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:48:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:48:31 Parameters OK
05:48:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:48:31 Set A/D data flow result=40
05:48:31 Set A/D channel type result=40
05:48:31 Set A/D encoding result=40
05:48:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:48:31 Set channel filter=0.000000e+000  result=40
05:48:31 Config A/D  Result=40
05:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:48:31 Get A/D filter: -9.255963e+061  result=40
05:48:31 Get A/D value=-858993460  result=40
05:48:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:48:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:48:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:48:31 Aux=
05:48:31 Message to Camera, serial 346163 queued
05:49:07 Received message from Master: op=PointingHead serial=346176
05:49:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:49:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:49:08 Point started: ret=0
05:49:08 point_skyscan result=0
05:49:09 Check angles
05:49:09 SkyScan query
05:49:09 SkyScan query done: ret=0  az=136.005<-9067  ze=-6.495<-12433  Statuses=0009 0008
05:49:09 Msec=0  True Az=136.005  Ze=-6.495  Az status=0009  Ze status=0008
05:49:09 Check angles
05:49:09 SkyScan query
05:49:10 SkyScan query done: ret=0  az=153.915<-10261  ze=-6.48<-12432  Statuses=0009 0008
05:49:10 Msec=750  True Az=153.915  Ze=-6.48  Az status=0009  Ze status=0008
05:49:10 Check angles
05:49:10 SkyScan query
05:49:11 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.48<-12432  Statuses=0009 0008
05:49:11 Msec=1500  True Az=171.3  Ze=-6.48  Az status=0009  Ze status=0008
05:49:11 Check angles
05:49:11 SkyScan query
05:49:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
05:49:11 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
05:49:11 Message to Master queued w/err=0: serial=346176 error=0
05:49:16 Received message from Master: op=Filter serial=346177
05:49:16 Color wheel filter change from 0 to 0
05:49:16 FLIGetFilterPos err=0  currentPosition=0
05:49:16 FLIGetStepsRemaining err=0  RemainingSteps=0
05:49:16 Filter is already there-color wheel unchanged
05:49:17 Received message from Master: op=Shutter serial=346178
05:49:17 Shutter LASER close
05:49:17 Received message from Camera: op=State serial=346180
05:49:17 GetSingleValue result=40  Value=cccccccc
05:49:17 SkyScan query
05:49:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
05:49:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:49:17 Parameters OK
05:49:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:49:17 Set A/D data flow result=40
05:49:17 Set A/D channel type result=40
05:49:17 Set A/D encoding result=40
05:49:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:49:17 Set channel filter=0.000000e+000  result=40
05:49:17 Config A/D  Result=40
05:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:49:17 Get A/D filter: -9.255963e+061  result=40
05:49:17 Get A/D value=-858993460  result=40
05:49:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:49:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:49:17 Parameters OK
05:49:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:49:17 Set A/D data flow result=40
05:49:17 Set A/D channel type result=40
05:49:17 Set A/D encoding result=40
05:49:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:49:17 Set channel filter=0.000000e+000  result=40
05:49:17 Config A/D  Result=40
05:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:49:17 Get A/D filter: -9.255963e+061  result=40
05:49:17 Get A/D value=-858993460  result=40
05:49:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:49:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:49:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:49:17 Aux=
05:49:17 Message to Camera, serial 346180 queued
05:49:54 Received message from Master: op=PointingHead serial=346193
05:49:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:49:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:49:54 Point started: ret=0
05:49:54 point_skyscan result=0
05:49:55 Check angles
05:49:55 SkyScan query
05:49:56 SkyScan query done: ret=0  az=152.58<-10172  ze=6.51<-11566  Statuses=0009 0008
05:49:56 Msec=0  True Az=152.58  Ze=6.51  Az status=0009  Ze status=0008
05:49:56 Check angles
05:49:56 SkyScan query
05:49:56 SkyScan query done: ret=0  az=134.79<-8986  ze=6.495<-11567  Statuses=0009 0008
05:49:56 Msec=750  True Az=134.79  Ze=6.495  Az status=0009  Ze status=0008
05:49:57 Check angles
05:49:57 SkyScan query
05:49:57 SkyScan query done: ret=0  az=117.3<-7820  ze=6.495<-11567  Statuses=0009 0008
05:49:57 Msec=1500  True Az=117.3  Ze=6.495  Az status=0009  Ze status=0008
05:49:57 Check angles
05:49:57 SkyScan query
05:49:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:49:58 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:49:58 Message to Master queued w/err=0: serial=346193 error=0
05:50:03 Received message from Master: op=Filter serial=346194
05:50:03 Color wheel filter change from 0 to 0
05:50:03 FLIGetFilterPos err=0  currentPosition=0
05:50:03 FLIGetStepsRemaining err=0  RemainingSteps=0
05:50:03 Filter is already there-color wheel unchanged
05:50:03 Received message from Master: op=Shutter serial=346195
05:50:03 Shutter LASER close
05:50:03 Received message from Camera: op=State serial=346197
05:50:03 GetSingleValue result=40  Value=cccccccc
05:50:03 SkyScan query
05:50:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:50:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:04 Parameters OK
05:50:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:04 Set A/D data flow result=40
05:50:04 Set A/D channel type result=40
05:50:04 Set A/D encoding result=40
05:50:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:04 Set channel filter=0.000000e+000  result=40
05:50:04 Config A/D  Result=40
05:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:04 Get A/D filter: -9.255963e+061  result=40
05:50:04 Get A/D value=-858993460  result=40
05:50:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:04 Parameters OK
05:50:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:04 Set A/D data flow result=40
05:50:04 Set A/D channel type result=40
05:50:04 Set A/D encoding result=40
05:50:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:04 Set channel filter=0.000000e+000  result=40
05:50:04 Config A/D  Result=40
05:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:04 Get A/D filter: -9.255963e+061  result=40
05:50:04 Get A/D value=-858993460  result=40
05:50:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:50:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:50:04 Aux=
05:50:04 Message to Camera, serial 346197 queued
05:50:41 Received message from Master: op=PointingHead serial=346210
05:50:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:50:41 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:50:41 Point started: ret=0
05:50:41 point_skyscan result=0
05:50:42 Check angles
05:50:42 SkyScan query
05:50:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
05:50:42 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
05:50:42 Check angles
05:50:42 SkyScan query
05:50:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.355<-14957  Statuses=0008 0009
05:50:43 Msec=750  True Az=112.995  Ze=-44.355  Az status=0008  Ze status=0009
05:50:43 Check angles
05:50:43 SkyScan query
05:50:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.31<-16354  Statuses=0008 0009
05:50:44 Msec=1500  True Az=112.995  Ze=-65.31  Az status=0008  Ze status=0009
05:50:44 Check angles
05:50:44 SkyScan query
05:50:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.265<-17751  Statuses=0008 0009
05:50:44 Msec=2250  True Az=112.995  Ze=-86.265  Az status=0008  Ze status=0009
05:50:45 Check angles
05:50:45 SkyScan query
05:50:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.22<-19148  Statuses=0008 0009
05:50:45 Msec=3000  True Az=112.995  Ze=-107.22  Az status=0008  Ze status=0009
05:50:45 Check angles
05:50:45 SkyScan query
05:50:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.16<-20544  Statuses=0008 0009
05:50:46 Msec=3750  True Az=112.995  Ze=-128.16  Az status=0008  Ze status=0009
05:50:46 Check angles
05:50:46 SkyScan query
05:50:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.13<-21942  Statuses=0008 0009
05:50:47 Msec=4500  True Az=112.995  Ze=-149.13  Az status=0008  Ze status=0009
05:50:47 Check angles
05:50:47 SkyScan query
05:50:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.07<-23338  Statuses=0008 0009
05:50:47 Msec=5250  True Az=112.995  Ze=-170.07  Az status=0008  Ze status=0009
05:50:48 Check angles
05:50:48 SkyScan query
05:50:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:50:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:50:48 Message to Master queued w/err=0: serial=346210 error=0
05:50:53 Received message from Master: op=Filter serial=346211
05:50:53 Color wheel filter change from 0 to 0
05:50:53 FLIGetFilterPos err=0  currentPosition=0
05:50:53 FLIGetStepsRemaining err=0  RemainingSteps=0
05:50:53 Filter is already there-color wheel unchanged
05:50:53 Received message from Master: op=Shutter serial=346212
05:50:53 Shutter LASER open
05:50:54 Received message from Camera: op=State serial=346214
05:50:54 GetSingleValue result=40  Value=cccccccc
05:50:54 SkyScan query
05:50:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:50:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:54 Parameters OK
05:50:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:54 Set A/D data flow result=40
05:50:54 Set A/D channel type result=40
05:50:54 Set A/D encoding result=40
05:50:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:54 Set channel filter=0.000000e+000  result=40
05:50:54 Config A/D  Result=40
05:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:54 Get A/D filter: -9.255963e+061  result=40
05:50:54 Get A/D value=-858993460  result=40
05:50:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:54 Parameters OK
05:50:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:54 Set A/D data flow result=40
05:50:54 Set A/D channel type result=40
05:50:54 Set A/D encoding result=40
05:50:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:54 Set channel filter=0.000000e+000  result=40
05:50:54 Config A/D  Result=40
05:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:54 Get A/D filter: -9.255963e+061  result=40
05:50:54 Get A/D value=-858993460  result=40
05:50:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:50:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:50:54 Aux=
05:50:54 Message to Camera, serial 346214 queued
05:51:03 Received message from Master: op=Shutter serial=346224
05:51:03 Shutter LASER close
05:51:03 Received message from Master: op=PointingHead serial=346228
05:51:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:51:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:51:03 Point started: ret=0
05:51:03 point_skyscan result=0
05:51:04 Check angles
05:51:04 SkyScan query
05:51:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.295<-21553  Statuses=0008 0009
05:51:05 Msec=0  True Az=112.995  Ze=-143.295  Az status=0008  Ze status=0009
05:51:05 Check angles
05:51:05 SkyScan query
05:51:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.355<-20157  Statuses=0008 0009
05:51:05 Msec=750  True Az=112.995  Ze=-122.355  Az status=0008  Ze status=0009
05:51:06 Check angles
05:51:06 SkyScan query
05:51:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.95<-18730  Statuses=0008 0009
05:51:06 Msec=1500  True Az=112.995  Ze=-100.95  Az status=0008  Ze status=0009
05:51:06 Check angles
05:51:06 SkyScan query
05:51:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.01<-17334  Statuses=0008 0009
05:51:07 Msec=2250  True Az=112.995  Ze=-80.01  Az status=0008  Ze status=0009
05:51:07 Check angles
05:51:07 SkyScan query
05:51:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.07<-15938  Statuses=0008 0009
05:51:08 Msec=3000  True Az=112.995  Ze=-59.07  Az status=0008  Ze status=0009
05:51:08 Check angles
05:51:08 SkyScan query
05:51:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.055<-14537  Statuses=0008 0009
05:51:08 Msec=3750  True Az=112.995  Ze=-38.055  Az status=0008  Ze status=0009
05:51:09 Check angles
05:51:09 SkyScan query
05:51:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.145<-13143  Statuses=0008 0009
05:51:09 Msec=4500  True Az=112.995  Ze=-17.145  Az status=0008  Ze status=0009
05:51:09 Check angles
05:51:09 SkyScan query
05:51:10 SkyScan query done: ret=0  az=112.995<-7533  ze=3.825<-11745  Statuses=0008 0009
05:51:10 Msec=5250  True Az=112.995  Ze=3.825  Az status=0008  Ze status=0009
05:51:10 Check angles
05:51:10 SkyScan query
05:51:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:51:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:51:11 Message to Master queued w/err=0: serial=346228 error=0
05:51:16 Received message from Master: op=Filter serial=346229
05:51:16 Color wheel filter change from 0 to 0
05:51:16 FLIGetFilterPos err=0  currentPosition=0
05:51:16 FLIGetStepsRemaining err=0  RemainingSteps=0
05:51:16 Filter is already there-color wheel unchanged
05:51:16 Received message from Master: op=Shutter serial=346230
05:51:16 Shutter LASER close
05:51:16 Received message from Camera: op=State serial=346232
05:51:16 GetSingleValue result=40  Value=cccccccc
05:51:16 SkyScan query
05:51:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:51:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:51:17 Parameters OK
05:51:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:51:17 Set A/D data flow result=40
05:51:17 Set A/D channel type result=40
05:51:17 Set A/D encoding result=40
05:51:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:51:17 Set channel filter=0.000000e+000  result=40
05:51:17 Config A/D  Result=40
05:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:51:17 Get A/D filter: -9.255963e+061  result=40
05:51:17 Get A/D value=-858993460  result=40
05:51:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:51:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:51:17 Parameters OK
05:51:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:51:17 Set A/D data flow result=40
05:51:17 Set A/D channel type result=40
05:51:17 Set A/D encoding result=40
05:51:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:51:17 Set channel filter=0.000000e+000  result=40
05:51:17 Config A/D  Result=40
05:51:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:51:17 Get A/D filter: -9.255963e+061  result=40
05:51:17 Get A/D value=-858993460  result=40
05:51:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:51:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:51:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:51:17 Aux=
05:51:17 Message to Camera, serial 346232 queued
05:51:53 Received message from Master: op=PointingHead serial=346245
05:51:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:51:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:51:54 Point started: ret=0
05:51:54 point_skyscan result=0
05:51:55 Check angles
05:51:55 SkyScan query
05:51:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:51:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:51:55 Message to Master queued w/err=0: serial=346245 error=0
05:52:00 Received message from Master: op=Filter serial=346246
05:52:00 Color wheel filter change from 0 to 0
05:52:00 FLIGetFilterPos err=0  currentPosition=0
05:52:00 FLIGetStepsRemaining err=0  RemainingSteps=0
05:52:00 Filter is already there-color wheel unchanged
05:52:00 Received message from Master: op=Shutter serial=346247
05:52:00 Shutter LASER close
05:52:00 Received message from Camera: op=State serial=346249
05:52:00 GetSingleValue result=40  Value=cccccccc
05:52:00 SkyScan query
05:52:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:52:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:52:01 Parameters OK
05:52:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:52:01 Set A/D data flow result=40
05:52:01 Set A/D channel type result=40
05:52:01 Set A/D encoding result=40
05:52:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:52:01 Set channel filter=0.000000e+000  result=40
05:52:01 Config A/D  Result=40
05:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:52:01 Get A/D filter: -9.255963e+061  result=40
05:52:01 Get A/D value=-858993460  result=40
05:52:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:52:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:52:01 Parameters OK
05:52:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:52:01 Set A/D data flow result=40
05:52:01 Set A/D channel type result=40
05:52:01 Set A/D encoding result=40
05:52:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:52:01 Set channel filter=0.000000e+000  result=40
05:52:01 Config A/D  Result=40
05:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:52:01 Get A/D filter: -9.255963e+061  result=40
05:52:01 Get A/D value=-858993460  result=40
05:52:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:52:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:52:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:52:01 Aux=
05:52:01 Message to Camera, serial 346249 queued
05:52:38 Received message from Master: op=PointingHead serial=346262
05:52:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:52:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:52:38 Point started: ret=0
05:52:38 point_skyscan result=0
05:52:39 Check angles
05:52:39 SkyScan query
05:52:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:52:40 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:52:40 Message to Master queued w/err=0: serial=346262 error=0
05:52:45 Received message from Master: op=Filter serial=346263
05:52:45 Color wheel filter change from 0 to 0
05:52:45 FLIGetFilterPos err=0  currentPosition=0
05:52:45 FLIGetStepsRemaining err=0  RemainingSteps=0
05:52:45 Filter is already there-color wheel unchanged
05:52:45 Received message from Master: op=Shutter serial=346264
05:52:45 Shutter LASER close
05:52:45 Received message from Camera: op=State serial=346266
05:52:45 GetSingleValue result=40  Value=cccccccc
05:52:45 SkyScan query
05:52:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:52:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:52:45 Parameters OK
05:52:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:52:45 Set A/D data flow result=40
05:52:45 Set A/D channel type result=40
05:52:45 Set A/D encoding result=40
05:52:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:52:45 Set channel filter=0.000000e+000  result=40
05:52:45 Config A/D  Result=40
05:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:52:45 Get A/D filter: -9.255963e+061  result=40
05:52:45 Get A/D value=-858993460  result=40
05:52:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:52:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:52:45 Parameters OK
05:52:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:52:45 Set A/D data flow result=40
05:52:45 Set A/D channel type result=40
05:52:45 Set A/D encoding result=40
05:52:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:52:45 Set channel filter=0.000000e+000  result=40
05:52:45 Config A/D  Result=40
05:52:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:52:45 Get A/D filter: -9.255963e+061  result=40
05:52:45 Get A/D value=-858993460  result=40
05:52:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:52:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:52:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:52:45 Aux=
05:52:45 Message to Camera, serial 346266 queued
05:53:22 Received message from Master: op=PointingHead serial=346279
05:53:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:53:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:53:23 Point started: ret=0
05:53:23 point_skyscan result=0
05:53:23 Check angles
05:53:23 SkyScan query
05:53:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:53:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:53:24 Message to Master queued w/err=0: serial=346279 error=0
05:53:29 Received message from Master: op=Filter serial=346280
05:53:29 Color wheel filter change from 0 to 0
05:53:29 FLIGetFilterPos err=0  currentPosition=0
05:53:29 FLIGetStepsRemaining err=0  RemainingSteps=0
05:53:29 Filter is already there-color wheel unchanged
05:53:29 Received message from Master: op=Shutter serial=346281
05:53:29 Shutter LASER close
05:53:29 Received message from Camera: op=State serial=346283
05:53:29 GetSingleValue result=40  Value=cccccccc
05:53:29 SkyScan query
05:53:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:53:30 Parameters OK
05:53:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:53:30 Set A/D data flow result=40
05:53:30 Set A/D channel type result=40
05:53:30 Set A/D encoding result=40
05:53:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:53:30 Set channel filter=0.000000e+000  result=40
05:53:30 Config A/D  Result=40
05:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:53:30 Get A/D filter: -9.255963e+061  result=40
05:53:30 Get A/D value=-858993460  result=40
05:53:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:53:30 Parameters OK
05:53:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:53:30 Set A/D data flow result=40
05:53:30 Set A/D channel type result=40
05:53:30 Set A/D encoding result=40
05:53:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:53:30 Set channel filter=0.000000e+000  result=40
05:53:30 Config A/D  Result=40
05:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:53:30 Get A/D filter: -9.255963e+061  result=40
05:53:30 Get A/D value=-858993460  result=40
05:53:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:53:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:53:30 Aux=
05:53:30 Message to Camera, serial 346283 queued
05:54:06 Received message from Master: op=PointingHead serial=346296
05:54:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:54:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:54:07 Point started: ret=0
05:54:07 point_skyscan result=0
05:54:08 Check angles
05:54:08 SkyScan query
05:54:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
05:54:08 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
05:54:08 Check angles
05:54:08 SkyScan query
05:54:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.07<-14938  Statuses=0008 0009
05:54:09 Msec=750  True Az=112.995  Ze=-44.07  Az status=0008  Ze status=0009
05:54:09 Check angles
05:54:09 SkyScan query
05:54:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.04<-16336  Statuses=0008 0009
05:54:10 Msec=1500  True Az=112.995  Ze=-65.04  Az status=0008  Ze status=0009
05:54:10 Check angles
05:54:10 SkyScan query
05:54:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.995<-17733  Statuses=0008 0009
05:54:10 Msec=2250  True Az=112.995  Ze=-85.995  Az status=0008  Ze status=0009
05:54:11 Check angles
05:54:11 SkyScan query
05:54:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.935<-19129  Statuses=0008 0009
05:54:11 Msec=3000  True Az=112.995  Ze=-106.935  Az status=0008  Ze status=0009
05:54:11 Check angles
05:54:11 SkyScan query
05:54:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.89<-20526  Statuses=0008 0009
05:54:12 Msec=3750  True Az=112.995  Ze=-127.89  Az status=0008  Ze status=0009
05:54:12 Check angles
05:54:12 SkyScan query
05:54:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.845<-21923  Statuses=0008 0009
05:54:13 Msec=4500  True Az=112.995  Ze=-148.845  Az status=0008  Ze status=0009
[UTC 2019-3-19  05:54:13]
05:54:13 Check angles
05:54:13 SkyScan query
05:54:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.315<-23421  Statuses=0008 0009
05:54:13 Msec=5250  True Az=112.995  Ze=-171.315  Az status=0008  Ze status=0009
05:54:14 Check angles
05:54:14 SkyScan query
05:54:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:54:14 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:54:14 Message to Master queued w/err=0: serial=346296 error=0
05:54:19 Received message from Master: op=Filter serial=346297
05:54:19 Color wheel filter change from 0 to 0
05:54:19 FLIGetFilterPos err=0  currentPosition=0
05:54:19 FLIGetStepsRemaining err=0  RemainingSteps=0
05:54:19 Filter is already there-color wheel unchanged
05:54:19 Received message from Master: op=Shutter serial=346298
05:54:19 Shutter LASER open
05:54:19 Received message from Camera: op=State serial=346300
05:54:19 GetSingleValue result=40  Value=cccccccc
05:54:19 SkyScan query
05:54:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:54:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:54:20 Parameters OK
05:54:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:54:20 Set A/D data flow result=40
05:54:20 Set A/D channel type result=40
05:54:20 Set A/D encoding result=40
05:54:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:54:20 Set channel filter=0.000000e+000  result=40
05:54:20 Config A/D  Result=40
05:54:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:54:20 Get A/D filter: -9.255963e+061  result=40
05:54:20 Get A/D value=-858993460  result=40
05:54:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:54:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:54:20 Parameters OK
05:54:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:54:20 Set A/D data flow result=40
05:54:20 Set A/D channel type result=40
05:54:20 Set A/D encoding result=40
05:54:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:54:20 Set channel filter=0.000000e+000  result=40
05:54:20 Config A/D  Result=40
05:54:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:54:20 Get A/D filter: -9.255963e+061  result=40
05:54:20 Get A/D value=-858993460  result=40
05:54:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:54:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:54:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:54:20 Aux=
05:54:20 Message to Camera, serial 346300 queued
05:54:28 Received message from Master: op=Shutter serial=346310
05:54:28 Shutter LASER close
05:54:29 Received message from Master: op=PointingHead serial=346314
05:54:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:54:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:54:29 Point started: ret=0
05:54:29 point_skyscan result=0
05:54:30 Check angles
05:54:30 SkyScan query
05:54:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.695<-21513  Statuses=0008 0009
05:54:31 Msec=0  True Az=112.995  Ze=-142.695  Az status=0008  Ze status=0009
05:54:31 Check angles
05:54:31 SkyScan query
05:54:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.74<-20116  Statuses=0008 0009
05:54:31 Msec=750  True Az=112.995  Ze=-121.74  Az status=0008  Ze status=0009
05:54:32 Check angles
05:54:32 SkyScan query
05:54:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.8<-18720  Statuses=0008 0009
05:54:32 Msec=1500  True Az=112.995  Ze=-100.8  Az status=0008  Ze status=0009
05:54:32 Check angles
05:54:32 SkyScan query
05:54:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.395<-17293  Statuses=0008 0009
05:54:33 Msec=2250  True Az=112.995  Ze=-79.395  Az status=0008  Ze status=0009
05:54:33 Check angles
05:54:33 SkyScan query
05:54:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.425<-15895  Statuses=0008 0009
05:54:34 Msec=3000  True Az=112.995  Ze=-58.425  Az status=0008  Ze status=0009
05:54:34 Check angles
05:54:34 SkyScan query
05:54:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.5<-14500  Statuses=0008 0009
05:54:34 Msec=3750  True Az=112.995  Ze=-37.5  Az status=0008  Ze status=0009
05:54:35 Check angles
05:54:35 SkyScan query
05:54:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.53<-13102  Statuses=0008 0009
05:54:35 Msec=4500  True Az=112.995  Ze=-16.53  Az status=0008  Ze status=0009
05:54:35 Check angles
05:54:35 SkyScan query
05:54:36 SkyScan query done: ret=0  az=112.995<-7533  ze=4.35<-11710  Statuses=0008 0009
05:54:36 Msec=5250  True Az=112.995  Ze=4.35  Az status=0008  Ze status=0009
05:54:36 Check angles
05:54:36 SkyScan query
05:54:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:54:37 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:54:37 Message to Master queued w/err=0: serial=346314 error=0
05:54:42 Received message from Master: op=Filter serial=346315
05:54:42 Color wheel filter change from 0 to 0
05:54:42 FLIGetFilterPos err=0  currentPosition=0
05:54:42 FLIGetStepsRemaining err=0  RemainingSteps=0
05:54:42 Filter is already there-color wheel unchanged
05:54:42 Received message from Master: op=Shutter serial=346316
05:54:42 Shutter LASER close
05:54:42 Received message from Camera: op=State serial=346318
05:54:42 GetSingleValue result=40  Value=cccccccc
05:54:42 SkyScan query
05:54:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:54:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:54:43 Parameters OK
05:54:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:54:43 Set A/D data flow result=40
05:54:43 Set A/D channel type result=40
05:54:43 Set A/D encoding result=40
05:54:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:54:43 Set channel filter=0.000000e+000  result=40
05:54:43 Config A/D  Result=40
05:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:54:43 Get A/D filter: -9.255963e+061  result=40
05:54:43 Get A/D value=-858993460  result=40
05:54:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:54:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:54:43 Parameters OK
05:54:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:54:43 Set A/D data flow result=40
05:54:43 Set A/D channel type result=40
05:54:43 Set A/D encoding result=40
05:54:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:54:43 Set channel filter=0.000000e+000  result=40
05:54:43 Config A/D  Result=40
05:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:54:43 Get A/D filter: -9.255963e+061  result=40
05:54:43 Get A/D value=-858993460  result=40
05:54:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:54:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:54:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:54:43 Aux=
05:54:43 Message to Camera, serial 346318 queued
05:55:19 Received message from Master: op=PointingHead serial=346331
05:55:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:55:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:55:20 Point started: ret=0
05:55:20 point_skyscan result=0
05:55:21 Check angles
05:55:21 SkyScan query
05:55:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:55:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:55:21 Message to Master queued w/err=0: serial=346331 error=0
05:55:26 Received message from Master: op=Filter serial=346332
05:55:26 Color wheel filter change from 0 to 0
05:55:26 FLIGetFilterPos err=0  currentPosition=0
05:55:26 FLIGetStepsRemaining err=0  RemainingSteps=0
05:55:26 Filter is already there-color wheel unchanged
05:55:26 Received message from Master: op=Shutter serial=346333
05:55:26 Shutter LASER close
05:55:26 Received message from Camera: op=State serial=346335
05:55:26 GetSingleValue result=40  Value=cccccccc
05:55:26 SkyScan query
05:55:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:55:27 Parameters OK
05:55:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:55:27 Set A/D data flow result=40
05:55:27 Set A/D channel type result=40
05:55:27 Set A/D encoding result=40
05:55:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:55:27 Set channel filter=0.000000e+000  result=40
05:55:27 Config A/D  Result=40
05:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:55:27 Get A/D filter: -9.255963e+061  result=40
05:55:27 Get A/D value=-858993460  result=40
05:55:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:55:27 Parameters OK
05:55:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:55:27 Set A/D data flow result=40
05:55:27 Set A/D channel type result=40
05:55:27 Set A/D encoding result=40
05:55:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:55:27 Set channel filter=0.000000e+000  result=40
05:55:27 Config A/D  Result=40
05:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:55:27 Get A/D filter: -9.255963e+061  result=40
05:55:27 Get A/D value=-858993460  result=40
05:55:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:55:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:55:27 Aux=
05:55:27 Message to Camera, serial 346335 queued
05:56:04 Received message from Master: op=PointingHead serial=346348
05:56:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:56:04 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:56:04 Point started: ret=0
05:56:04 point_skyscan result=0
05:56:05 Check angles
05:56:05 SkyScan query
05:56:05 SkyScan query done: ret=0  az=135.735<-9049  ze=-6.495<-12433  Statuses=0009 0008
05:56:05 Msec=0  True Az=135.735  Ze=-6.495  Az status=0009  Ze status=0008
05:56:06 Check angles
05:56:06 SkyScan query
05:56:06 SkyScan query done: ret=0  az=153.555<-10237  ze=-6.48<-12432  Statuses=0009 0008
05:56:06 Msec=750  True Az=153.555  Ze=-6.48  Az status=0009  Ze status=0008
05:56:06 Check angles
05:56:06 SkyScan query
05:56:07 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.48<-12432  Statuses=0009 0008
05:56:07 Msec=1500  True Az=171.33  Ze=-6.48  Az status=0009  Ze status=0008
05:56:07 Check angles
05:56:07 SkyScan query
05:56:08 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
05:56:08 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
05:56:08 Message to Master queued w/err=0: serial=346348 error=0
05:56:13 Received message from Master: op=Filter serial=346349
05:56:13 Color wheel filter change from 0 to 0
05:56:13 FLIGetFilterPos err=0  currentPosition=0
05:56:13 FLIGetStepsRemaining err=0  RemainingSteps=0
05:56:13 Filter is already there-color wheel unchanged
05:56:13 Received message from Master: op=Shutter serial=346350
05:56:13 Shutter LASER close
05:56:13 Received message from Camera: op=State serial=346352
05:56:13 GetSingleValue result=40  Value=cccccccc
05:56:13 SkyScan query
05:56:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
05:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:56:13 Parameters OK
05:56:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:56:13 Set A/D data flow result=40
05:56:13 Set A/D channel type result=40
05:56:13 Set A/D encoding result=40
05:56:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:56:13 Set channel filter=0.000000e+000  result=40
05:56:13 Config A/D  Result=40
05:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:56:13 Get A/D filter: -9.255963e+061  result=40
05:56:13 Get A/D value=-858993460  result=40
05:56:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:56:13 Parameters OK
05:56:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:56:13 Set A/D data flow result=40
05:56:13 Set A/D channel type result=40
05:56:13 Set A/D encoding result=40
05:56:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:56:13 Set channel filter=0.000000e+000  result=40
05:56:13 Config A/D  Result=40
05:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:56:13 Get A/D filter: -9.255963e+061  result=40
05:56:13 Get A/D value=-858993460  result=40
05:56:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:56:13 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:56:13 Aux=
05:56:13 Message to Camera, serial 346352 queued
05:56:50 Received message from Master: op=PointingHead serial=346365
05:56:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:56:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:56:51 Point started: ret=0
05:56:51 point_skyscan result=0
05:56:51 Check angles
05:56:51 SkyScan query
05:56:52 SkyScan query done: ret=0  az=152.865<-10191  ze=6.51<-11566  Statuses=0009 0008
05:56:52 Msec=0  True Az=152.865  Ze=6.51  Az status=0009  Ze status=0008
05:56:52 Check angles
05:56:52 SkyScan query
05:56:53 SkyScan query done: ret=0  az=135.315<-9021  ze=6.495<-11567  Statuses=0009 0008
05:56:53 Msec=750  True Az=135.315  Ze=6.495  Az status=0009  Ze status=0008
05:56:53 Check angles
05:56:53 SkyScan query
05:56:54 SkyScan query done: ret=0  az=117.405<-7827  ze=6.495<-11567  Statuses=0009 0008
05:56:54 Msec=1500  True Az=117.405  Ze=6.495  Az status=0009  Ze status=0008
05:56:54 Check angles
05:56:54 SkyScan query
05:56:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:56:54 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:56:54 Message to Master queued w/err=0: serial=346365 error=0
05:56:59 Received message from Master: op=Filter serial=346366
05:56:59 Color wheel filter change from 0 to 0
05:56:59 FLIGetFilterPos err=0  currentPosition=0
05:56:59 FLIGetStepsRemaining err=0  RemainingSteps=0
05:56:59 Filter is already there-color wheel unchanged
05:57:00 Received message from Master: op=Shutter serial=346367
05:57:00 Shutter LASER close
05:57:00 Received message from Camera: op=State serial=346369
05:57:00 GetSingleValue result=40  Value=cccccccc
05:57:00 SkyScan query
05:57:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:00 Parameters OK
05:57:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:00 Set A/D data flow result=40
05:57:00 Set A/D channel type result=40
05:57:00 Set A/D encoding result=40
05:57:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:00 Set channel filter=0.000000e+000  result=40
05:57:00 Config A/D  Result=40
05:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:00 Get A/D filter: -9.255963e+061  result=40
05:57:00 Get A/D value=-858993460  result=40
05:57:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:00 Parameters OK
05:57:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:00 Set A/D data flow result=40
05:57:00 Set A/D channel type result=40
05:57:00 Set A/D encoding result=40
05:57:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:00 Set channel filter=0.000000e+000  result=40
05:57:00 Config A/D  Result=40
05:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:00 Get A/D filter: -9.255963e+061  result=40
05:57:00 Get A/D value=-858993460  result=40
05:57:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:57:00 Aux=
05:57:00 Message to Camera, serial 346369 queued
05:57:37 Received message from Master: op=PointingHead serial=346382
05:57:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:57:37 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:57:37 Point started: ret=0
05:57:37 point_skyscan result=0
05:57:38 Check angles
05:57:38 SkyScan query
05:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
05:57:39 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
05:57:39 Check angles
05:57:39 SkyScan query
05:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.04<-14936  Statuses=0008 0009
05:57:39 Msec=750  True Az=112.995  Ze=-44.04  Az status=0008  Ze status=0009
05:57:40 Check angles
05:57:40 SkyScan query
05:57:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.415<-16361  Statuses=0008 0009
05:57:40 Msec=1500  True Az=112.995  Ze=-65.415  Az status=0008  Ze status=0009
05:57:40 Check angles
05:57:40 SkyScan query
05:57:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.385<-17759  Statuses=0008 0009
05:57:41 Msec=2250  True Az=112.995  Ze=-86.385  Az status=0008  Ze status=0009
05:57:41 Check angles
05:57:41 SkyScan query
05:57:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.325<-19155  Statuses=0008 0009
05:57:42 Msec=3000  True Az=112.995  Ze=-107.325  Az status=0008  Ze status=0009
05:57:42 Check angles
05:57:42 SkyScan query
05:57:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.7<-20580  Statuses=0008 0009
05:57:42 Msec=3750  True Az=112.995  Ze=-128.7  Az status=0008  Ze status=0009
05:57:43 Check angles
05:57:43 SkyScan query
05:57:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.09<-22006  Statuses=0008 0009
05:57:43 Msec=4500  True Az=112.995  Ze=-150.09  Az status=0008  Ze status=0009
05:57:43 Check angles
05:57:43 SkyScan query
05:57:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.94<-23396  Statuses=0008 0009
05:57:44 Msec=5250  True Az=112.995  Ze=-170.94  Az status=0008  Ze status=0009
05:57:44 Check angles
05:57:44 SkyScan query
05:57:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:57:45 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:57:45 Message to Master queued w/err=0: serial=346382 error=0
05:57:50 Received message from Master: op=Filter serial=346383
05:57:50 Color wheel filter change from 0 to 0
05:57:50 FLIGetFilterPos err=0  currentPosition=0
05:57:50 FLIGetStepsRemaining err=0  RemainingSteps=0
05:57:50 Filter is already there-color wheel unchanged
05:57:50 Received message from Master: op=Shutter serial=346384
05:57:50 Shutter LASER open
05:57:50 Received message from Camera: op=State serial=346386
05:57:50 GetSingleValue result=40  Value=cccccccc
05:57:50 SkyScan query
05:57:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:57:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:51 Parameters OK
05:57:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:51 Set A/D data flow result=40
05:57:51 Set A/D channel type result=40
05:57:51 Set A/D encoding result=40
05:57:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:51 Set channel filter=0.000000e+000  result=40
05:57:51 Config A/D  Result=40
05:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:51 Get A/D filter: -9.255963e+061  result=40
05:57:51 Get A/D value=-858993460  result=40
05:57:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:51 Parameters OK
05:57:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:51 Set A/D data flow result=40
05:57:51 Set A/D channel type result=40
05:57:51 Set A/D encoding result=40
05:57:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:51 Set channel filter=0.000000e+000  result=40
05:57:51 Config A/D  Result=40
05:57:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:51 Get A/D filter: -9.255963e+061  result=40
05:57:51 Get A/D value=-858993460  result=40
05:57:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:57:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:57:51 Aux=
05:57:51 Message to Camera, serial 346386 queued
05:57:59 Received message from Master: op=Shutter serial=346396
05:57:59 Shutter LASER close
05:58:00 Received message from Master: op=PointingHead serial=346400
05:58:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:58:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:58:00 Point started: ret=0
05:58:00 point_skyscan result=0
05:58:01 Check angles
05:58:01 SkyScan query
05:58:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.205<-21547  Statuses=0008 0009
05:58:01 Msec=0  True Az=112.995  Ze=-143.205  Az status=0008  Ze status=0009
05:58:01 Check angles
05:58:01 SkyScan query
05:58:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.265<-20151  Statuses=0008 0009
05:58:02 Msec=750  True Az=112.995  Ze=-122.265  Az status=0008  Ze status=0009
05:58:02 Check angles
05:58:02 SkyScan query
05:58:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.31<-18754  Statuses=0008 0009
05:58:03 Msec=1500  True Az=112.995  Ze=-101.31  Az status=0008  Ze status=0009
05:58:03 Check angles
05:58:03 SkyScan query
05:58:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.34<-17356  Statuses=0008 0009
05:58:03 Msec=2250  True Az=112.995  Ze=-80.34  Az status=0008  Ze status=0009
05:58:04 Check angles
05:58:04 SkyScan query
05:58:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.415<-15961  Statuses=0008 0009
05:58:04 Msec=3000  True Az=112.995  Ze=-59.415  Az status=0008  Ze status=0009
05:58:04 Check angles
05:58:04 SkyScan query
05:58:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.43<-14562  Statuses=0008 0009
05:58:05 Msec=3750  True Az=112.995  Ze=-38.43  Az status=0008  Ze status=0009
05:58:05 Check angles
05:58:05 SkyScan query
05:58:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.49<-13166  Statuses=0008 0009
05:58:06 Msec=4500  True Az=112.995  Ze=-17.49  Az status=0008  Ze status=0009
05:58:06 Check angles
05:58:06 SkyScan query
05:58:06 SkyScan query done: ret=0  az=112.995<-7533  ze=3.465<-11769  Statuses=0008 0009
05:58:06 Msec=5250  True Az=112.995  Ze=3.465  Az status=0008  Ze status=0009
05:58:07 Check angles
05:58:07 SkyScan query
05:58:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:58:07 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:58:07 Message to Master queued w/err=0: serial=346400 error=0
05:58:12 Received message from Master: op=Filter serial=346401
05:58:12 Color wheel filter change from 0 to 0
05:58:12 FLIGetFilterPos err=0  currentPosition=0
05:58:12 FLIGetStepsRemaining err=0  RemainingSteps=0
05:58:12 Filter is already there-color wheel unchanged
05:58:12 Received message from Master: op=Shutter serial=346402
05:58:12 Shutter LASER close
05:58:13 Received message from Camera: op=State serial=346404
05:58:13 GetSingleValue result=40  Value=cccccccc
05:58:13 SkyScan query
05:58:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:58:13 Parameters OK
05:58:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:58:13 Set A/D data flow result=40
05:58:13 Set A/D channel type result=40
05:58:13 Set A/D encoding result=40
05:58:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:58:13 Set channel filter=0.000000e+000  result=40
05:58:13 Config A/D  Result=40
05:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:58:13 Get A/D filter: -9.255963e+061  result=40
05:58:13 Get A/D value=-858993460  result=40
05:58:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:58:13 Parameters OK
05:58:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:58:13 Set A/D data flow result=40
05:58:13 Set A/D channel type result=40
05:58:13 Set A/D encoding result=40
05:58:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:58:13 Set channel filter=0.000000e+000  result=40
05:58:13 Config A/D  Result=40
05:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:58:13 Get A/D filter: -9.255963e+061  result=40
05:58:13 Get A/D value=-858993460  result=40
05:58:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:58:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:58:13 Aux=
05:58:13 Message to Camera, serial 346404 queued
05:58:50 Received message from Master: op=PointingHead serial=346417
05:58:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:58:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:58:50 Point started: ret=0
05:58:50 point_skyscan result=0
05:58:51 Check angles
05:58:51 SkyScan query
05:58:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:58:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:58:52 Message to Master queued w/err=0: serial=346417 error=0
05:58:57 Received message from Master: op=Filter serial=346418
05:58:57 Color wheel filter change from 0 to 0
05:58:57 FLIGetFilterPos err=0  currentPosition=0
05:58:57 FLIGetStepsRemaining err=0  RemainingSteps=0
05:58:57 Filter is already there-color wheel unchanged
05:58:57 Received message from Master: op=Shutter serial=346419
05:58:57 Shutter LASER close
05:58:57 Received message from Camera: op=State serial=346421
05:58:57 GetSingleValue result=40  Value=cccccccc
05:58:57 SkyScan query
05:58:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:58:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:58:57 Parameters OK
05:58:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:58:57 Set A/D data flow result=40
05:58:57 Set A/D channel type result=40
05:58:57 Set A/D encoding result=40
05:58:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:58:57 Set channel filter=0.000000e+000  result=40
05:58:57 Config A/D  Result=40
05:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:58:57 Get A/D filter: -9.255963e+061  result=40
05:58:57 Get A/D value=-858993460  result=40
05:58:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:58:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:58:57 Parameters OK
05:58:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:58:57 Set A/D data flow result=40
05:58:57 Set A/D channel type result=40
05:58:57 Set A/D encoding result=40
05:58:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:58:57 Set channel filter=0.000000e+000  result=40
05:58:57 Config A/D  Result=40
05:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:58:57 Get A/D filter: -9.255963e+061  result=40
05:58:57 Get A/D value=-858993460  result=40
05:58:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:58:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:58:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:58:57 Aux=
05:58:57 Message to Camera, serial 346421 queued
05:59:34 Received message from Master: op=PointingHead serial=346434
05:59:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:59:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:59:35 Point started: ret=0
05:59:35 point_skyscan result=0
05:59:35 Check angles
05:59:35 SkyScan query
05:59:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:59:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:59:36 Message to Master queued w/err=0: serial=346434 error=0
05:59:41 Received message from Master: op=Filter serial=346435
05:59:41 Color wheel filter change from 0 to 0
05:59:41 FLIGetFilterPos err=0  currentPosition=0
05:59:41 FLIGetStepsRemaining err=0  RemainingSteps=0
05:59:41 Filter is already there-color wheel unchanged
05:59:41 Received message from Master: op=Shutter serial=346436
05:59:41 Shutter LASER close
05:59:41 Received message from Camera: op=State serial=346438
05:59:41 GetSingleValue result=40  Value=cccccccc
05:59:41 SkyScan query
05:59:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:59:42 Parameters OK
05:59:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:59:42 Set A/D data flow result=40
05:59:42 Set A/D channel type result=40
05:59:42 Set A/D encoding result=40
05:59:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:59:42 Set channel filter=0.000000e+000  result=40
05:59:42 Config A/D  Result=40
05:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:59:42 Get A/D filter: -9.255963e+061  result=40
05:59:42 Get A/D value=-858993460  result=40
05:59:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:59:42 Parameters OK
05:59:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:59:42 Set A/D data flow result=40
05:59:42 Set A/D channel type result=40
05:59:42 Set A/D encoding result=40
05:59:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:59:42 Set channel filter=0.000000e+000  result=40
05:59:42 Config A/D  Result=40
05:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:59:42 Get A/D filter: -9.255963e+061  result=40
05:59:42 Get A/D value=-858993460  result=40
05:59:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:59:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:59:42 Aux=
05:59:42 Message to Camera, serial 346438 queued
06:00:19 Received message from Master: op=PointingHead serial=346451
06:00:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:00:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:00:19 Point started: ret=0
06:00:19 point_skyscan result=0
06:00:20 Check angles
06:00:20 SkyScan query
06:00:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:00:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:00:20 Message to Master queued w/err=0: serial=346451 error=0
06:00:25 Received message from Master: op=Filter serial=346452
06:00:25 Color wheel filter change from 0 to 0
06:00:25 FLIGetFilterPos err=0  currentPosition=0
06:00:25 FLIGetStepsRemaining err=0  RemainingSteps=0
06:00:25 Filter is already there-color wheel unchanged
06:00:25 Received message from Master: op=Shutter serial=346453
06:00:25 Shutter LASER close
06:00:25 Received message from Camera: op=State serial=346455
06:00:25 GetSingleValue result=40  Value=cccccccc
06:00:25 SkyScan query
06:00:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:00:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:00:26 Parameters OK
06:00:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:00:26 Set A/D data flow result=40
06:00:26 Set A/D channel type result=40
06:00:26 Set A/D encoding result=40
06:00:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:00:26 Set channel filter=0.000000e+000  result=40
06:00:26 Config A/D  Result=40
06:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:00:26 Get A/D filter: -9.255963e+061  result=40
06:00:26 Get A/D value=-858993460  result=40
06:00:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:00:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:00:26 Parameters OK
06:00:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:00:26 Set A/D data flow result=40
06:00:26 Set A/D channel type result=40
06:00:26 Set A/D encoding result=40
06:00:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:00:26 Set channel filter=0.000000e+000  result=40
06:00:26 Config A/D  Result=40
06:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:00:26 Get A/D filter: -9.255963e+061  result=40
06:00:26 Get A/D value=-858993460  result=40
06:00:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:00:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:00:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:00:26 Aux=
06:00:26 Message to Camera, serial 346455 queued
06:01:03 Received message from Master: op=PointingHead serial=346468
06:01:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:01:03 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:01:03 Point started: ret=0
06:01:03 point_skyscan result=0
06:01:04 Check angles
06:01:04 SkyScan query
06:01:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
06:01:05 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
06:01:05 Check angles
06:01:05 SkyScan query
06:01:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.745<-14983  Statuses=0008 0009
06:01:05 Msec=750  True Az=112.995  Ze=-44.745  Az status=0008  Ze status=0009
06:01:06 Check angles
06:01:06 SkyScan query
06:01:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.685<-16379  Statuses=0008 0009
06:01:06 Msec=1500  True Az=112.995  Ze=-65.685  Az status=0008  Ze status=0009
06:01:06 Check angles
06:01:06 SkyScan query
06:01:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.64<-17776  Statuses=0008 0009
06:01:07 Msec=2250  True Az=112.995  Ze=-86.64  Az status=0008  Ze status=0009
06:01:07 Check angles
06:01:07 SkyScan query
06:01:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.595<-19173  Statuses=0008 0009
06:01:08 Msec=3000  True Az=112.995  Ze=-107.595  Az status=0008  Ze status=0009
06:01:08 Check angles
06:01:08 SkyScan query
06:01:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.535<-20569  Statuses=0008 0009
06:01:08 Msec=3750  True Az=112.995  Ze=-128.535  Az status=0008  Ze status=0009
06:01:09 Check angles
06:01:09 SkyScan query
06:01:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.505<-21967  Statuses=0008 0009
06:01:09 Msec=4500  True Az=112.995  Ze=-149.505  Az status=0008  Ze status=0009
06:01:09 Check angles
06:01:09 SkyScan query
06:01:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.445<-23363  Statuses=0008 0009
06:01:10 Msec=5250  True Az=112.995  Ze=-170.445  Az status=0008  Ze status=0009
06:01:10 Check angles
06:01:10 SkyScan query
06:01:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:01:11 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:01:11 Message to Master queued w/err=0: serial=346468 error=0
06:01:16 Received message from Master: op=Filter serial=346469
06:01:16 Color wheel filter change from 0 to 0
06:01:16 FLIGetFilterPos err=0  currentPosition=0
06:01:16 FLIGetStepsRemaining err=0  RemainingSteps=0
06:01:16 Filter is already there-color wheel unchanged
06:01:16 Received message from Master: op=Shutter serial=346470
06:01:16 Shutter LASER open
06:01:16 Received message from Camera: op=State serial=346472
06:01:16 GetSingleValue result=40  Value=cccccccc
06:01:16 SkyScan query
06:01:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:01:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:17 Parameters OK
06:01:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:17 Set A/D data flow result=40
06:01:17 Set A/D channel type result=40
06:01:17 Set A/D encoding result=40
06:01:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:17 Set channel filter=0.000000e+000  result=40
06:01:17 Config A/D  Result=40
06:01:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:17 Get A/D filter: -9.255963e+061  result=40
06:01:17 Get A/D value=-858993460  result=40
06:01:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:17 Parameters OK
06:01:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:17 Set A/D data flow result=40
06:01:17 Set A/D channel type result=40
06:01:17 Set A/D encoding result=40
06:01:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:17 Set channel filter=0.000000e+000  result=40
06:01:17 Config A/D  Result=40
06:01:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:17 Get A/D filter: -9.255963e+061  result=40
06:01:17 Get A/D value=-858993460  result=40
06:01:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:01:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:01:17 Aux=
06:01:17 Message to Camera, serial 346472 queued
06:01:25 Received message from Master: op=Shutter serial=346482
06:01:25 Shutter LASER close
06:01:26 Received message from Master: op=PointingHead serial=346486
06:01:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:01:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:01:26 Point started: ret=0
06:01:26 point_skyscan result=0
06:01:27 Check angles
06:01:27 SkyScan query
06:01:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.43<-21562  Statuses=0008 0009
06:01:27 Msec=0  True Az=112.995  Ze=-143.43  Az status=0008  Ze status=0009
06:01:28 Check angles
06:01:28 SkyScan query
06:01:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.025<-20135  Statuses=0008 0009
06:01:28 Msec=750  True Az=112.995  Ze=-122.025  Az status=0008  Ze status=0009
06:01:28 Check angles
06:01:28 SkyScan query
06:01:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.65<-18710  Statuses=0008 0009
06:01:29 Msec=1500  True Az=112.995  Ze=-100.65  Az status=0008  Ze status=0009
06:01:29 Check angles
06:01:29 SkyScan query
06:01:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.695<-17313  Statuses=0008 0009
06:01:30 Msec=2250  True Az=112.995  Ze=-79.695  Az status=0008  Ze status=0009
06:01:30 Check angles
06:01:30 SkyScan query
06:01:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.74<-15916  Statuses=0008 0009
06:01:30 Msec=3000  True Az=112.995  Ze=-58.74  Az status=0008  Ze status=0009
06:01:31 Check angles
06:01:31 SkyScan query
06:01:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.785<-14519  Statuses=0008 0009
06:01:31 Msec=3750  True Az=112.995  Ze=-37.785  Az status=0008  Ze status=0009
06:01:31 Check angles
06:01:31 SkyScan query
06:01:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.815<-13121  Statuses=0008 0009
06:01:32 Msec=4500  True Az=112.995  Ze=-16.815  Az status=0008  Ze status=0009
06:01:32 Check angles
06:01:32 SkyScan query
06:01:33 SkyScan query done: ret=0  az=112.995<-7533  ze=4.47<-11702  Statuses=0008 0009
06:01:33 Msec=5250  True Az=112.995  Ze=4.47  Az status=0008  Ze status=0009
06:01:33 Check angles
06:01:33 SkyScan query
06:01:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:01:33 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:01:33 Message to Master queued w/err=0: serial=346486 error=0
06:01:38 Received message from Master: op=Filter serial=346487
06:01:38 Color wheel filter change from 0 to 0
06:01:38 FLIGetFilterPos err=0  currentPosition=0
06:01:38 FLIGetStepsRemaining err=0  RemainingSteps=0
06:01:38 Filter is already there-color wheel unchanged
06:01:39 Received message from Master: op=Shutter serial=346488
06:01:39 Shutter LASER close
06:01:39 Received message from Camera: op=State serial=346490
06:01:39 GetSingleValue result=40  Value=cccccccc
06:01:39 SkyScan query
06:01:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:01:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:39 Parameters OK
06:01:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:39 Set A/D data flow result=40
06:01:39 Set A/D channel type result=40
06:01:39 Set A/D encoding result=40
06:01:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:39 Set channel filter=0.000000e+000  result=40
06:01:39 Config A/D  Result=40
06:01:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:39 Get A/D filter: -9.255963e+061  result=40
06:01:39 Get A/D value=-858993460  result=40
06:01:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:39 Parameters OK
06:01:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:39 Set A/D data flow result=40
06:01:39 Set A/D channel type result=40
06:01:39 Set A/D encoding result=40
06:01:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:39 Set channel filter=0.000000e+000  result=40
06:01:39 Config A/D  Result=40
06:01:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:39 Get A/D filter: -9.255963e+061  result=40
06:01:39 Get A/D value=-858993460  result=40
06:01:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:01:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:01:39 Aux=
06:01:39 Message to Camera, serial 346490 queued
06:02:16 Received message from Master: op=PointingHead serial=346503
06:02:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:02:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:02:16 Point started: ret=0
06:02:16 point_skyscan result=0
06:02:17 Check angles
06:02:17 SkyScan query
06:02:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:02:18 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:02:18 Message to Master queued w/err=0: serial=346503 error=0
06:02:23 Received message from Master: op=Filter serial=346504
06:02:23 Color wheel filter change from 0 to 0
06:02:23 FLIGetFilterPos err=0  currentPosition=0
06:02:23 FLIGetStepsRemaining err=0  RemainingSteps=0
06:02:23 Filter is already there-color wheel unchanged
06:02:23 Received message from Master: op=Shutter serial=346505
06:02:23 Shutter LASER close
06:02:23 Received message from Camera: op=State serial=346507
06:02:23 GetSingleValue result=40  Value=cccccccc
06:02:23 SkyScan query
06:02:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:02:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:02:24 Parameters OK
06:02:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:02:24 Set A/D data flow result=40
06:02:24 Set A/D channel type result=40
06:02:24 Set A/D encoding result=40
06:02:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:02:24 Set channel filter=0.000000e+000  result=40
06:02:24 Config A/D  Result=40
06:02:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:02:24 Get A/D filter: -9.255963e+061  result=40
06:02:24 Get A/D value=-858993460  result=40
06:02:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:02:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:02:24 Parameters OK
06:02:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:02:24 Set A/D data flow result=40
06:02:24 Set A/D channel type result=40
06:02:24 Set A/D encoding result=40
06:02:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:02:24 Set channel filter=0.000000e+000  result=40
06:02:24 Config A/D  Result=40
06:02:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:02:24 Get A/D filter: -9.255963e+061  result=40
06:02:24 Get A/D value=-858993460  result=40
06:02:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:02:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:02:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:02:24 Aux=
06:02:24 Message to Camera, serial 346507 queued
06:03:00 Received message from Master: op=PointingHead serial=346520
06:03:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:03:00 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:03:01 Point started: ret=0
06:03:01 point_skyscan result=0
06:03:02 Check angles
06:03:02 SkyScan query
06:03:02 SkyScan query done: ret=0  az=135.645<-9043  ze=-6.51<-12434  Statuses=0009 0008
06:03:02 Msec=0  True Az=135.645  Ze=-6.51  Az status=0009  Ze status=0008
06:03:02 Check angles
06:03:02 SkyScan query
06:03:03 SkyScan query done: ret=0  az=153.255<-10217  ze=-6.495<-12433  Statuses=0009 0008
06:03:03 Msec=750  True Az=153.255  Ze=-6.495  Az status=0009  Ze status=0008
06:03:03 Check angles
06:03:03 SkyScan query
06:03:04 SkyScan query done: ret=0  az=170.64<-11376  ze=-6.495<-12433  Statuses=0009 0008
06:03:04 Msec=1500  True Az=170.64  Ze=-6.495  Az status=0009  Ze status=0008
06:03:04 Check angles
06:03:04 SkyScan query
06:03:04 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:03:04 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:03:04 Message to Master queued w/err=0: serial=346520 error=0
06:03:09 Received message from Master: op=Filter serial=346521
06:03:09 Color wheel filter change from 0 to 0
06:03:09 FLIGetFilterPos err=0  currentPosition=0
06:03:09 FLIGetStepsRemaining err=0  RemainingSteps=0
06:03:09 Filter is already there-color wheel unchanged
06:03:10 Received message from Master: op=Shutter serial=346522
06:03:10 Shutter LASER close
06:03:10 Received message from Camera: op=State serial=346524
06:03:10 GetSingleValue result=40  Value=cccccccc
06:03:10 SkyScan query
06:03:10 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:03:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:03:10 Parameters OK
06:03:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:03:10 Set A/D data flow result=40
06:03:10 Set A/D channel type result=40
06:03:10 Set A/D encoding result=40
06:03:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:03:10 Set channel filter=0.000000e+000  result=40
06:03:10 Config A/D  Result=40
06:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:03:10 Get A/D filter: -9.255963e+061  result=40
06:03:10 Get A/D value=-858993460  result=40
06:03:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:03:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:03:10 Parameters OK
06:03:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:03:10 Set A/D data flow result=40
06:03:10 Set A/D channel type result=40
06:03:10 Set A/D encoding result=40
06:03:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:03:10 Set channel filter=0.000000e+000  result=40
06:03:10 Config A/D  Result=40
06:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:03:10 Get A/D filter: -9.255963e+061  result=40
06:03:10 Get A/D value=-858993460  result=40
06:03:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:03:10 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:03:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:03:10 Aux=
06:03:10 Message to Camera, serial 346524 queued
06:03:35 Received message from Master: op=Identify serial=346525
06:03:46 Received message from Master: op=PointingHead serial=346539
06:03:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:03:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:03:46 Point started: ret=0
06:03:46 point_skyscan result=0
06:03:47 Check angles
06:03:47 SkyScan query
06:03:48 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
06:03:48 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
[UTC 2019-3-19  06:03:48]
06:03:48 Check angles
06:03:48 SkyScan query
06:03:48 SkyScan query done: ret=0  az=135.27<-9018  ze=6.495<-11567  Statuses=0009 0008
06:03:48 Msec=750  True Az=135.27  Ze=6.495  Az status=0009  Ze status=0008
06:03:49 Check angles
06:03:49 SkyScan query
06:03:49 SkyScan query done: ret=0  az=117.42<-7828  ze=6.495<-11567  Statuses=0009 0008
06:03:49 Msec=1500  True Az=117.42  Ze=6.495  Az status=0009  Ze status=0008
06:03:49 Check angles
06:03:49 SkyScan query
06:03:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:03:50 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:03:50 Message to Master queued w/err=0: serial=346539 error=0
06:03:55 Received message from Master: op=Filter serial=346540
06:03:55 Color wheel filter change from 0 to 0
06:03:55 FLIGetFilterPos err=0  currentPosition=0
06:03:55 FLIGetStepsRemaining err=0  RemainingSteps=0
06:03:55 Filter is already there-color wheel unchanged
06:03:55 Received message from Master: op=Shutter serial=346541
06:03:55 Shutter LASER close
06:03:55 Received message from Camera: op=State serial=346543
06:03:55 GetSingleValue result=40  Value=cccccccc
06:03:55 SkyScan query
06:03:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:03:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:03:56 Parameters OK
06:03:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:03:56 Set A/D data flow result=40
06:03:56 Set A/D channel type result=40
06:03:56 Set A/D encoding result=40
06:03:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:03:56 Set channel filter=0.000000e+000  result=40
06:03:56 Config A/D  Result=40
06:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:03:56 Get A/D filter: -9.255963e+061  result=40
06:03:56 Get A/D value=-858993460  result=40
06:03:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:03:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:03:56 Parameters OK
06:03:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:03:56 Set A/D data flow result=40
06:03:56 Set A/D channel type result=40
06:03:56 Set A/D encoding result=40
06:03:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:03:56 Set channel filter=0.000000e+000  result=40
06:03:56 Config A/D  Result=40
06:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:03:56 Get A/D filter: -9.255963e+061  result=40
06:03:56 Get A/D value=-858993460  result=40
06:03:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:03:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:03:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:03:56 Aux=
06:03:56 Message to Camera, serial 346543 queued
06:04:33 Received message from Master: op=PointingHead serial=346556
06:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:04:33 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:04:33 Point started: ret=0
06:04:33 point_skyscan result=0
06:04:34 Check angles
06:04:34 SkyScan query
06:04:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
06:04:34 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
06:04:34 Check angles
06:04:34 SkyScan query
06:04:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.52<-14968  Statuses=0008 0009
06:04:35 Msec=750  True Az=112.995  Ze=-44.52  Az status=0008  Ze status=0009
06:04:35 Check angles
06:04:35 SkyScan query
06:04:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.46<-16364  Statuses=0008 0009
06:04:36 Msec=1500  True Az=112.995  Ze=-65.46  Az status=0008  Ze status=0009
06:04:36 Check angles
06:04:36 SkyScan query
06:04:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.415<-17761  Statuses=0008 0009
06:04:36 Msec=2250  True Az=112.995  Ze=-86.415  Az status=0008  Ze status=0009
06:04:37 Check angles
06:04:37 SkyScan query
06:04:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
06:04:37 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
06:04:37 Check angles
06:04:37 SkyScan query
06:04:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.31<-20554  Statuses=0008 0009
06:04:38 Msec=3750  True Az=112.995  Ze=-128.31  Az status=0008  Ze status=0009
06:04:38 Check angles
06:04:38 SkyScan query
06:04:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.28<-21952  Statuses=0008 0009
06:04:39 Msec=4500  True Az=112.995  Ze=-149.28  Az status=0008  Ze status=0009
06:04:39 Check angles
06:04:39 SkyScan query
06:04:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.61<-23374  Statuses=0008 0009
06:04:39 Msec=5250  True Az=112.995  Ze=-170.61  Az status=0008  Ze status=0009
06:04:40 Check angles
06:04:40 SkyScan query
06:04:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:04:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:04:40 Message to Master queued w/err=0: serial=346556 error=0
06:04:45 Received message from Master: op=Filter serial=346557
06:04:45 Color wheel filter change from 0 to 0
06:04:45 FLIGetFilterPos err=0  currentPosition=0
06:04:45 FLIGetStepsRemaining err=0  RemainingSteps=0
06:04:45 Filter is already there-color wheel unchanged
06:04:45 Received message from Master: op=Shutter serial=346558
06:04:45 Shutter LASER open
06:04:46 Received message from Camera: op=State serial=346560
06:04:46 GetSingleValue result=40  Value=cccccccc
06:04:46 SkyScan query
06:04:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:04:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:04:46 Parameters OK
06:04:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:04:46 Set A/D data flow result=40
06:04:46 Set A/D channel type result=40
06:04:46 Set A/D encoding result=40
06:04:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:04:46 Set channel filter=0.000000e+000  result=40
06:04:46 Config A/D  Result=40
06:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:04:46 Get A/D filter: -9.255963e+061  result=40
06:04:46 Get A/D value=-858993460  result=40
06:04:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:04:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:04:46 Parameters OK
06:04:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:04:46 Set A/D data flow result=40
06:04:46 Set A/D channel type result=40
06:04:46 Set A/D encoding result=40
06:04:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:04:46 Set channel filter=0.000000e+000  result=40
06:04:46 Config A/D  Result=40
06:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:04:46 Get A/D filter: -9.255963e+061  result=40
06:04:46 Get A/D value=-858993460  result=40
06:04:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:04:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:04:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:04:46 Aux=
06:04:46 Message to Camera, serial 346560 queued
06:04:55 Received message from Master: op=Shutter serial=346570
06:04:55 Shutter LASER close
06:04:55 Received message from Master: op=PointingHead serial=346574
06:04:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:04:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:04:55 Point started: ret=0
06:04:55 point_skyscan result=0
06:04:56 Check angles
06:04:56 SkyScan query
06:04:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.28<-21552  Statuses=0008 0009
06:04:57 Msec=0  True Az=112.995  Ze=-143.28  Az status=0008  Ze status=0009
06:04:57 Check angles
06:04:57 SkyScan query
06:04:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.34<-20156  Statuses=0008 0009
06:04:57 Msec=750  True Az=112.995  Ze=-122.34  Az status=0008  Ze status=0009
06:04:58 Check angles
06:04:58 SkyScan query
06:04:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.385<-18759  Statuses=0008 0009
06:04:58 Msec=1500  True Az=112.995  Ze=-101.385  Az status=0008  Ze status=0009
06:04:58 Check angles
06:04:58 SkyScan query
06:04:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.415<-17361  Statuses=0008 0009
06:04:59 Msec=2250  True Az=112.995  Ze=-80.415  Az status=0008  Ze status=0009
06:04:59 Check angles
06:04:59 SkyScan query
06:05:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.49<-15966  Statuses=0008 0009
06:05:00 Msec=3000  True Az=112.995  Ze=-59.49  Az status=0008  Ze status=0009
06:05:00 Check angles
06:05:00 SkyScan query
06:05:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.505<-14567  Statuses=0008 0009
06:05:00 Msec=3750  True Az=112.995  Ze=-38.505  Az status=0008  Ze status=0009
06:05:01 Check angles
06:05:01 SkyScan query
06:05:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.565<-13171  Statuses=0008 0009
06:05:01 Msec=4500  True Az=112.995  Ze=-17.565  Az status=0008  Ze status=0009
06:05:01 Check angles
06:05:01 SkyScan query
06:05:02 SkyScan query done: ret=0  az=112.995<-7533  ze=3.405<-11773  Statuses=0008 0009
06:05:02 Msec=5250  True Az=112.995  Ze=3.405  Az status=0008  Ze status=0009
06:05:02 Check angles
06:05:02 SkyScan query
06:05:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:05:03 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:05:03 Message to Master queued w/err=0: serial=346574 error=0
06:05:08 Received message from Master: op=Filter serial=346575
06:05:08 Color wheel filter change from 0 to 0
06:05:08 FLIGetFilterPos err=0  currentPosition=0
06:05:08 FLIGetStepsRemaining err=0  RemainingSteps=0
06:05:08 Filter is already there-color wheel unchanged
06:05:08 Received message from Master: op=Shutter serial=346576
06:05:08 Shutter LASER close
06:05:08 Received message from Camera: op=State serial=346578
06:05:08 GetSingleValue result=40  Value=cccccccc
06:05:08 SkyScan query
06:05:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:05:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:05:09 Parameters OK
06:05:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:05:09 Set A/D data flow result=40
06:05:09 Set A/D channel type result=40
06:05:09 Set A/D encoding result=40
06:05:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:05:09 Set channel filter=0.000000e+000  result=40
06:05:09 Config A/D  Result=40
06:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:05:09 Get A/D filter: -9.255963e+061  result=40
06:05:09 Get A/D value=-858993460  result=40
06:05:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:05:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:05:09 Parameters OK
06:05:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:05:09 Set A/D data flow result=40
06:05:09 Set A/D channel type result=40
06:05:09 Set A/D encoding result=40
06:05:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:05:09 Set channel filter=0.000000e+000  result=40
06:05:09 Config A/D  Result=40
06:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:05:09 Get A/D filter: -9.255963e+061  result=40
06:05:09 Get A/D value=-858993460  result=40
06:05:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:05:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:05:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:05:09 Aux=
06:05:09 Message to Camera, serial 346578 queued
06:05:45 Received message from Master: op=PointingHead serial=346591
06:05:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:05:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:05:46 Point started: ret=0
06:05:46 point_skyscan result=0
06:05:47 Check angles
06:05:47 SkyScan query
06:05:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:05:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:05:47 Message to Master queued w/err=0: serial=346591 error=0
06:05:52 Received message from Master: op=Filter serial=346592
06:05:52 Color wheel filter change from 0 to 0
06:05:52 FLIGetFilterPos err=0  currentPosition=0
06:05:52 FLIGetStepsRemaining err=0  RemainingSteps=0
06:05:52 Filter is already there-color wheel unchanged
06:05:52 Received message from Master: op=Shutter serial=346593
06:05:52 Shutter LASER close
06:05:52 Received message from Camera: op=State serial=346595
06:05:52 GetSingleValue result=40  Value=cccccccc
06:05:52 SkyScan query
06:05:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:05:53 Parameters OK
06:05:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:05:53 Set A/D data flow result=40
06:05:53 Set A/D channel type result=40
06:05:53 Set A/D encoding result=40
06:05:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:05:53 Set channel filter=0.000000e+000  result=40
06:05:53 Config A/D  Result=40
06:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:05:53 Get A/D filter: -9.255963e+061  result=40
06:05:53 Get A/D value=-858993460  result=40
06:05:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:05:53 Parameters OK
06:05:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:05:53 Set A/D data flow result=40
06:05:53 Set A/D channel type result=40
06:05:53 Set A/D encoding result=40
06:05:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:05:53 Set channel filter=0.000000e+000  result=40
06:05:53 Config A/D  Result=40
06:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:05:53 Get A/D filter: -9.255963e+061  result=40
06:05:53 Get A/D value=-858993460  result=40
06:05:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:05:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:05:53 Aux=
06:05:53 Message to Camera, serial 346595 queued
06:06:30 Received message from Master: op=PointingHead serial=346608
06:06:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:06:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:06:30 Point started: ret=0
06:06:30 point_skyscan result=0
06:06:31 Check angles
06:06:31 SkyScan query
06:06:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:06:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:06:31 Message to Master queued w/err=0: serial=346608 error=0
06:06:36 Received message from Master: op=Filter serial=346609
06:06:36 Color wheel filter change from 0 to 0
06:06:36 FLIGetFilterPos err=0  currentPosition=0
06:06:36 FLIGetStepsRemaining err=0  RemainingSteps=0
06:06:36 Filter is already there-color wheel unchanged
06:06:37 Received message from Master: op=Shutter serial=346610
06:06:37 Shutter LASER close
06:06:37 Received message from Camera: op=State serial=346612
06:06:37 GetSingleValue result=40  Value=cccccccc
06:06:37 SkyScan query
06:06:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:06:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:06:37 Parameters OK
06:06:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:06:37 Set A/D data flow result=40
06:06:37 Set A/D channel type result=40
06:06:37 Set A/D encoding result=40
06:06:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:06:37 Set channel filter=0.000000e+000  result=40
06:06:37 Config A/D  Result=40
06:06:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:06:37 Get A/D filter: -9.255963e+061  result=40
06:06:37 Get A/D value=-858993460  result=40
06:06:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:06:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:06:37 Parameters OK
06:06:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:06:37 Set A/D data flow result=40
06:06:37 Set A/D channel type result=40
06:06:37 Set A/D encoding result=40
06:06:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:06:37 Set channel filter=0.000000e+000  result=40
06:06:37 Config A/D  Result=40
06:06:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:06:37 Get A/D filter: -9.255963e+061  result=40
06:06:37 Get A/D value=-858993460  result=40
06:06:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:06:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:06:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:06:37 Aux=
06:06:37 Message to Camera, serial 346612 queued
06:07:14 Received message from Master: op=PointingHead serial=346625
06:07:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:07:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:07:14 Point started: ret=0
06:07:14 point_skyscan result=0
06:07:15 Check angles
06:07:15 SkyScan query
06:07:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:07:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:07:16 Message to Master queued w/err=0: serial=346625 error=0
06:07:21 Received message from Master: op=Filter serial=346626
06:07:21 Color wheel filter change from 0 to 0
06:07:21 FLIGetFilterPos err=0  currentPosition=0
06:07:21 FLIGetStepsRemaining err=0  RemainingSteps=0
06:07:21 Filter is already there-color wheel unchanged
06:07:21 Received message from Master: op=Shutter serial=346627
06:07:21 Shutter LASER close
06:07:21 Received message from Camera: op=State serial=346629
06:07:21 GetSingleValue result=40  Value=cccccccc
06:07:21 SkyScan query
06:07:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:07:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:07:22 Parameters OK
06:07:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:07:22 Set A/D data flow result=40
06:07:22 Set A/D channel type result=40
06:07:22 Set A/D encoding result=40
06:07:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:07:22 Set channel filter=0.000000e+000  result=40
06:07:22 Config A/D  Result=40
06:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:07:22 Get A/D filter: -9.255963e+061  result=40
06:07:22 Get A/D value=-858993460  result=40
06:07:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:07:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:07:22 Parameters OK
06:07:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:07:22 Set A/D data flow result=40
06:07:22 Set A/D channel type result=40
06:07:22 Set A/D encoding result=40
06:07:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:07:22 Set channel filter=0.000000e+000  result=40
06:07:22 Config A/D  Result=40
06:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:07:22 Get A/D filter: -9.255963e+061  result=40
06:07:22 Get A/D value=-858993460  result=40
06:07:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:07:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:07:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:07:22 Aux=
06:07:22 Message to Camera, serial 346629 queued
06:07:58 Received message from Master: op=PointingHead serial=346642
06:07:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:07:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:07:59 Point started: ret=0
06:07:59 point_skyscan result=0
06:08:00 Check angles
06:08:00 SkyScan query
06:08:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-22.995<-13533  Statuses=0008 0009
06:08:00 Msec=0  True Az=112.995  Ze=-22.995  Az status=0008  Ze status=0009
06:08:00 Check angles
06:08:00 SkyScan query
06:08:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.95<-14930  Statuses=0008 0009
06:08:01 Msec=750  True Az=112.995  Ze=-43.95  Az status=0008  Ze status=0009
06:08:01 Check angles
06:08:01 SkyScan query
06:08:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.92<-16328  Statuses=0008 0009
06:08:02 Msec=1500  True Az=112.995  Ze=-64.92  Az status=0008  Ze status=0009
06:08:02 Check angles
06:08:02 SkyScan query
06:08:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.875<-17725  Statuses=0008 0009
06:08:02 Msec=2250  True Az=112.995  Ze=-85.875  Az status=0008  Ze status=0009
06:08:03 Check angles
06:08:03 SkyScan query
06:08:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.815<-19121  Statuses=0008 0009
06:08:03 Msec=3000  True Az=112.995  Ze=-106.815  Az status=0008  Ze status=0009
06:08:03 Check angles
06:08:03 SkyScan query
06:08:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.785<-20519  Statuses=0008 0009
06:08:04 Msec=3750  True Az=112.995  Ze=-127.785  Az status=0008  Ze status=0009
06:08:04 Check angles
06:08:04 SkyScan query
06:08:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.725<-21915  Statuses=0008 0009
06:08:05 Msec=4500  True Az=112.995  Ze=-148.725  Az status=0008  Ze status=0009
06:08:05 Check angles
06:08:05 SkyScan query
06:08:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.68<-23312  Statuses=0008 0009
06:08:05 Msec=5250  True Az=112.995  Ze=-169.68  Az status=0008  Ze status=0009
06:08:06 Check angles
06:08:06 SkyScan query
06:08:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:08:06 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:08:06 Message to Master queued w/err=0: serial=346642 error=0
06:08:11 Received message from Master: op=Filter serial=346643
06:08:11 Color wheel filter change from 0 to 0
06:08:11 FLIGetFilterPos err=0  currentPosition=0
06:08:11 FLIGetStepsRemaining err=0  RemainingSteps=0
06:08:11 Filter is already there-color wheel unchanged
06:08:11 Received message from Master: op=Shutter serial=346644
06:08:11 Shutter LASER open
06:08:11 Received message from Camera: op=State serial=346646
06:08:11 GetSingleValue result=40  Value=cccccccc
06:08:11 SkyScan query
06:08:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:08:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:12 Parameters OK
06:08:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:12 Set A/D data flow result=40
06:08:12 Set A/D channel type result=40
06:08:12 Set A/D encoding result=40
06:08:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:12 Set channel filter=0.000000e+000  result=40
06:08:12 Config A/D  Result=40
06:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:12 Get A/D filter: -9.255963e+061  result=40
06:08:12 Get A/D value=-858993460  result=40
06:08:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:12 Parameters OK
06:08:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:12 Set A/D data flow result=40
06:08:12 Set A/D channel type result=40
06:08:12 Set A/D encoding result=40
06:08:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:12 Set channel filter=0.000000e+000  result=40
06:08:12 Config A/D  Result=40
06:08:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:12 Get A/D filter: -9.255963e+061  result=40
06:08:12 Get A/D value=-858993460  result=40
06:08:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:08:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:08:12 Aux=
06:08:12 Message to Camera, serial 346646 queued
06:08:20 Received message from Master: op=Shutter serial=346656
06:08:20 Shutter LASER close
06:08:21 Received message from Master: op=PointingHead serial=346660
06:08:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:08:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:08:21 Point started: ret=0
06:08:21 point_skyscan result=0
06:08:22 Check angles
06:08:22 SkyScan query
06:08:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
06:08:23 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
06:08:23 Check angles
06:08:23 SkyScan query
06:08:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.815<-20121  Statuses=0008 0009
06:08:23 Msec=750  True Az=112.995  Ze=-121.815  Az status=0008  Ze status=0009
06:08:24 Check angles
06:08:24 SkyScan query
06:08:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.455<-18697  Statuses=0008 0009
06:08:24 Msec=1500  True Az=112.995  Ze=-100.455  Az status=0008  Ze status=0009
06:08:24 Check angles
06:08:24 SkyScan query
06:08:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.485<-17299  Statuses=0008 0009
06:08:25 Msec=2250  True Az=112.995  Ze=-79.485  Az status=0008  Ze status=0009
06:08:25 Check angles
06:08:25 SkyScan query
06:08:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.53<-15902  Statuses=0008 0009
06:08:26 Msec=3000  True Az=112.995  Ze=-58.53  Az status=0008  Ze status=0009
06:08:26 Check angles
06:08:26 SkyScan query
06:08:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.59<-14506  Statuses=0008 0009
06:08:26 Msec=3750  True Az=112.995  Ze=-37.59  Az status=0008  Ze status=0009
06:08:27 Check angles
06:08:27 SkyScan query
06:08:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.62<-13108  Statuses=0008 0009
06:08:27 Msec=4500  True Az=112.995  Ze=-16.62  Az status=0008  Ze status=0009
06:08:27 Check angles
06:08:27 SkyScan query
06:08:28 SkyScan query done: ret=0  az=112.995<-7533  ze=4.275<-11715  Statuses=0008 0009
06:08:28 Msec=5250  True Az=112.995  Ze=4.275  Az status=0008  Ze status=0009
06:08:28 Check angles
06:08:28 SkyScan query
06:08:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:08:29 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:08:29 Message to Master queued w/err=0: serial=346660 error=0
06:08:34 Received message from Master: op=Filter serial=346661
06:08:34 Color wheel filter change from 0 to 0
06:08:34 FLIGetFilterPos err=0  currentPosition=0
06:08:34 FLIGetStepsRemaining err=0  RemainingSteps=0
06:08:34 Filter is already there-color wheel unchanged
06:08:34 Received message from Master: op=Shutter serial=346662
06:08:34 Shutter LASER close
06:08:34 Received message from Camera: op=State serial=346664
06:08:34 GetSingleValue result=40  Value=cccccccc
06:08:34 SkyScan query
06:08:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:08:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:35 Parameters OK
06:08:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:35 Set A/D data flow result=40
06:08:35 Set A/D channel type result=40
06:08:35 Set A/D encoding result=40
06:08:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:35 Set channel filter=0.000000e+000  result=40
06:08:35 Config A/D  Result=40
06:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:35 Get A/D filter: -9.255963e+061  result=40
06:08:35 Get A/D value=-858993460  result=40
06:08:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:35 Parameters OK
06:08:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:35 Set A/D data flow result=40
06:08:35 Set A/D channel type result=40
06:08:35 Set A/D encoding result=40
06:08:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:35 Set channel filter=0.000000e+000  result=40
06:08:35 Config A/D  Result=40
06:08:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:35 Get A/D filter: -9.255963e+061  result=40
06:08:35 Get A/D value=-858993460  result=40
06:08:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:08:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:08:35 Aux=
06:08:35 Message to Camera, serial 346664 queued
06:09:11 Received message from Master: op=PointingHead serial=346677
06:09:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:09:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:09:12 Point started: ret=0
06:09:12 point_skyscan result=0
06:09:13 Check angles
06:09:13 SkyScan query
06:09:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:09:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:09:13 Message to Master queued w/err=0: serial=346677 error=0
06:09:18 Received message from Master: op=Filter serial=346678
06:09:18 Color wheel filter change from 0 to 0
06:09:18 FLIGetFilterPos err=0  currentPosition=0
06:09:18 FLIGetStepsRemaining err=0  RemainingSteps=0
06:09:18 Filter is already there-color wheel unchanged
06:09:18 Received message from Master: op=Shutter serial=346679
06:09:18 Shutter LASER close
06:09:18 Received message from Camera: op=State serial=346681
06:09:18 GetSingleValue result=40  Value=cccccccc
06:09:18 SkyScan query
06:09:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:09:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:09:19 Parameters OK
06:09:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:09:19 Set A/D data flow result=40
06:09:19 Set A/D channel type result=40
06:09:19 Set A/D encoding result=40
06:09:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:09:19 Set channel filter=0.000000e+000  result=40
06:09:19 Config A/D  Result=40
06:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:09:19 Get A/D filter: -9.255963e+061  result=40
06:09:19 Get A/D value=-858993460  result=40
06:09:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:09:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:09:19 Parameters OK
06:09:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:09:19 Set A/D data flow result=40
06:09:19 Set A/D channel type result=40
06:09:19 Set A/D encoding result=40
06:09:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:09:19 Set channel filter=0.000000e+000  result=40
06:09:19 Config A/D  Result=40
06:09:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:09:19 Get A/D filter: -9.255963e+061  result=40
06:09:19 Get A/D value=-858993460  result=40
06:09:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:09:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:09:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:09:19 Aux=
06:09:19 Message to Camera, serial 346681 queued
06:09:55 Received message from Master: op=PointingHead serial=346693
06:09:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:09:55 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:09:55 Point started: ret=0
06:09:55 point_skyscan result=0
06:09:56 Check angles
06:09:56 SkyScan query
06:09:56 SkyScan query done: ret=0  az=136.185<-9079  ze=-6.495<-12433  Statuses=0009 0008
06:09:56 Msec=0  True Az=136.185  Ze=-6.495  Az status=0009  Ze status=0008
06:09:57 Check angles
06:09:57 SkyScan query
06:09:57 SkyScan query done: ret=0  az=153.645<-10243  ze=-6.48<-12432  Statuses=0009 0008
06:09:57 Msec=750  True Az=153.645  Ze=-6.48  Az status=0009  Ze status=0008
06:09:57 Check angles
06:09:57 SkyScan query
06:09:58 SkyScan query done: ret=0  az=171.45<-11430  ze=-6.48<-12432  Statuses=0009 0008
06:09:58 Msec=1500  True Az=171.45  Ze=-6.48  Az status=0009  Ze status=0008
06:09:58 Check angles
06:09:58 SkyScan query
06:09:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
06:09:59 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
06:09:59 Message to Master queued w/err=0: serial=346693 error=0
06:10:04 Received message from Master: op=Filter serial=346694
06:10:04 Color wheel filter change from 0 to 0
06:10:04 FLIGetFilterPos err=0  currentPosition=0
06:10:04 FLIGetStepsRemaining err=0  RemainingSteps=0
06:10:04 Filter is already there-color wheel unchanged
06:10:04 Received message from Master: op=Shutter serial=346695
06:10:04 Shutter LASER close
06:10:04 Received message from Camera: op=State serial=346697
06:10:04 GetSingleValue result=40  Value=cccccccc
06:10:04 SkyScan query
06:10:05 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
06:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:10:05 Parameters OK
06:10:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:10:05 Set A/D data flow result=40
06:10:05 Set A/D channel type result=40
06:10:05 Set A/D encoding result=40
06:10:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:10:05 Set channel filter=0.000000e+000  result=40
06:10:05 Config A/D  Result=40
06:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:10:05 Get A/D filter: -9.255963e+061  result=40
06:10:05 Get A/D value=-858993460  result=40
06:10:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:10:05 Parameters OK
06:10:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:10:05 Set A/D data flow result=40
06:10:05 Set A/D channel type result=40
06:10:05 Set A/D encoding result=40
06:10:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:10:05 Set channel filter=0.000000e+000  result=40
06:10:05 Config A/D  Result=40
06:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:10:05 Get A/D filter: -9.255963e+061  result=40
06:10:05 Get A/D value=-858993460  result=40
06:10:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:10:05 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:10:05 Aux=
06:10:05 Message to Camera, serial 346697 queued
06:10:41 Received message from Master: op=PointingHead serial=346710
06:10:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:10:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:10:42 Point started: ret=0
06:10:42 point_skyscan result=0
06:10:42 Check angles
06:10:42 SkyScan query
06:10:43 SkyScan query done: ret=0  az=152.595<-10173  ze=6.51<-11566  Statuses=0009 0008
06:10:43 Msec=0  True Az=152.595  Ze=6.51  Az status=0009  Ze status=0008
06:10:43 Check angles
06:10:43 SkyScan query
06:10:44 SkyScan query done: ret=0  az=135.105<-9007  ze=6.495<-11567  Statuses=0009 0008
06:10:44 Msec=750  True Az=135.105  Ze=6.495  Az status=0009  Ze status=0008
06:10:44 Check angles
06:10:44 SkyScan query
06:10:45 SkyScan query done: ret=0  az=117.51<-7834  ze=6.495<-11567  Statuses=0009 0008
06:10:45 Msec=1500  True Az=117.51  Ze=6.495  Az status=0009  Ze status=0008
06:10:45 Check angles
06:10:45 SkyScan query
06:10:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:10:45 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:10:45 Message to Master queued w/err=0: serial=346710 error=0
06:10:50 Received message from Master: op=Filter serial=346711
06:10:50 Color wheel filter change from 0 to 0
06:10:50 FLIGetFilterPos err=0  currentPosition=0
06:10:50 FLIGetStepsRemaining err=0  RemainingSteps=0
06:10:50 Filter is already there-color wheel unchanged
06:10:50 Received message from Master: op=Shutter serial=346712
06:10:50 Shutter LASER close
06:10:51 Received message from Camera: op=State serial=346714
06:10:51 GetSingleValue result=40  Value=cccccccc
06:10:51 SkyScan query
06:10:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:10:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:10:51 Parameters OK
06:10:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:10:51 Set A/D data flow result=40
06:10:51 Set A/D channel type result=40
06:10:51 Set A/D encoding result=40
06:10:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:10:51 Set channel filter=0.000000e+000  result=40
06:10:51 Config A/D  Result=40
06:10:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:10:51 Get A/D filter: -9.255963e+061  result=40
06:10:51 Get A/D value=-858993460  result=40
06:10:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:10:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:10:51 Parameters OK
06:10:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:10:51 Set A/D data flow result=40
06:10:51 Set A/D channel type result=40
06:10:51 Set A/D encoding result=40
06:10:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:10:51 Set channel filter=0.000000e+000  result=40
06:10:51 Config A/D  Result=40
06:10:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:10:51 Get A/D filter: -9.255963e+061  result=40
06:10:51 Get A/D value=-858993460  result=40
06:10:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:10:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:10:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:10:51 Aux=
06:10:51 Message to Camera, serial 346714 queued
06:11:27 Received message from Master: op=PointingHead serial=346726
06:11:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:11:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:11:27 Point started: ret=0
06:11:27 point_skyscan result=0
06:11:28 Check angles
06:11:28 SkyScan query
06:11:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
06:11:29 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
06:11:29 Check angles
06:11:29 SkyScan query
06:11:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
06:11:29 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
06:11:30 Check angles
06:11:30 SkyScan query
06:11:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.82<-16388  Statuses=0008 0009
06:11:30 Msec=1500  True Az=112.995  Ze=-65.82  Az status=0008  Ze status=0009
06:11:30 Check angles
06:11:30 SkyScan query
06:11:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.775<-17785  Statuses=0008 0009
06:11:31 Msec=2250  True Az=112.995  Ze=-86.775  Az status=0008  Ze status=0009
06:11:31 Check angles
06:11:31 SkyScan query
06:11:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.73<-19182  Statuses=0008 0009
06:11:32 Msec=3000  True Az=112.995  Ze=-107.73  Az status=0008  Ze status=0009
06:11:32 Check angles
06:11:32 SkyScan query
06:11:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.12<-20608  Statuses=0008 0009
06:11:32 Msec=3750  True Az=112.995  Ze=-129.12  Az status=0008  Ze status=0009
06:11:33 Check angles
06:11:33 SkyScan query
06:11:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.51<-22034  Statuses=0008 0009
06:11:33 Msec=4500  True Az=112.995  Ze=-150.51  Az status=0008  Ze status=0009
06:11:33 Check angles
06:11:33 SkyScan query
06:11:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.255<-23417  Statuses=0008 0009
06:11:34 Msec=5250  True Az=112.995  Ze=-171.255  Az status=0008  Ze status=0009
06:11:34 Check angles
06:11:34 SkyScan query
06:11:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:11:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:11:35 Message to Master queued w/err=0: serial=346726 error=0
06:11:40 Received message from Master: op=Filter serial=346727
06:11:40 Color wheel filter change from 0 to 0
06:11:40 FLIGetFilterPos err=0  currentPosition=0
06:11:40 FLIGetStepsRemaining err=0  RemainingSteps=0
06:11:40 Filter is already there-color wheel unchanged
06:11:40 Received message from Master: op=Shutter serial=346728
06:11:40 Shutter LASER open
06:11:40 Received message from Camera: op=State serial=346730
06:11:40 GetSingleValue result=40  Value=cccccccc
06:11:40 SkyScan query
06:11:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:11:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:11:41 Parameters OK
06:11:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:11:41 Set A/D data flow result=40
06:11:41 Set A/D channel type result=40
06:11:41 Set A/D encoding result=40
06:11:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:11:41 Set channel filter=0.000000e+000  result=40
06:11:41 Config A/D  Result=40
06:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:11:41 Get A/D filter: -9.255963e+061  result=40
06:11:41 Get A/D value=-858993460  result=40
06:11:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:11:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:11:41 Parameters OK
06:11:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:11:41 Set A/D data flow result=40
06:11:41 Set A/D channel type result=40
06:11:41 Set A/D encoding result=40
06:11:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:11:41 Set channel filter=0.000000e+000  result=40
06:11:41 Config A/D  Result=40
06:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:11:41 Get A/D filter: -9.255963e+061  result=40
06:11:41 Get A/D value=-858993460  result=40
06:11:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:11:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:11:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:11:41 Aux=
06:11:41 Message to Camera, serial 346730 queued
06:11:49 Received message from Master: op=Shutter serial=346740
06:11:49 Shutter LASER close
06:11:50 Received message from Master: op=PointingHead serial=346744
06:11:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:11:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:11:50 Point started: ret=0
06:11:50 point_skyscan result=0
06:11:51 Check angles
06:11:51 SkyScan query
06:11:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.49<-21566  Statuses=0008 0009
06:11:51 Msec=0  True Az=112.995  Ze=-143.49  Az status=0008  Ze status=0009
06:11:51 Check angles
06:11:51 SkyScan query
06:11:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
06:11:52 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
06:11:52 Check angles
06:11:52 SkyScan query
06:11:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.565<-18771  Statuses=0008 0009
06:11:53 Msec=1500  True Az=112.995  Ze=-101.565  Az status=0008  Ze status=0009
06:11:53 Check angles
06:11:53 SkyScan query
06:11:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.595<-17373  Statuses=0008 0009
06:11:53 Msec=2250  True Az=112.995  Ze=-80.595  Az status=0008  Ze status=0009
06:11:54 Check angles
06:11:54 SkyScan query
06:11:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.655<-15977  Statuses=0008 0009
06:11:54 Msec=3000  True Az=112.995  Ze=-59.655  Az status=0008  Ze status=0009
06:11:54 Check angles
06:11:54 SkyScan query
06:11:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.7<-14580  Statuses=0008 0009
06:11:55 Msec=3750  True Az=112.995  Ze=-38.7  Az status=0008  Ze status=0009
06:11:55 Check angles
06:11:55 SkyScan query
06:11:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.73<-13182  Statuses=0008 0009
06:11:56 Msec=4500  True Az=112.995  Ze=-17.73  Az status=0008  Ze status=0009
06:11:56 Check angles
06:11:56 SkyScan query
06:11:56 SkyScan query done: ret=0  az=112.995<-7533  ze=3.66<-11756  Statuses=0008 0009
06:11:56 Msec=5250  True Az=112.995  Ze=3.66  Az status=0008  Ze status=0009
06:11:57 Check angles
06:11:57 SkyScan query
06:11:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:11:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:11:57 Message to Master queued w/err=0: serial=346744 error=0
06:12:02 Received message from Master: op=Filter serial=346745
06:12:02 Color wheel filter change from 0 to 0
06:12:02 FLIGetFilterPos err=0  currentPosition=0
06:12:02 FLIGetStepsRemaining err=0  RemainingSteps=0
06:12:02 Filter is already there-color wheel unchanged
06:12:02 Received message from Master: op=Shutter serial=346746
06:12:02 Shutter LASER close
06:12:03 Received message from Camera: op=State serial=346748
06:12:03 GetSingleValue result=40  Value=cccccccc
06:12:03 SkyScan query
06:12:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:12:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:12:03 Parameters OK
06:12:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:12:03 Set A/D data flow result=40
06:12:03 Set A/D channel type result=40
06:12:03 Set A/D encoding result=40
06:12:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:12:03 Set channel filter=0.000000e+000  result=40
06:12:03 Config A/D  Result=40
06:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:12:03 Get A/D filter: -9.255963e+061  result=40
06:12:03 Get A/D value=-858993460  result=40
06:12:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:12:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:12:03 Parameters OK
06:12:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:12:03 Set A/D data flow result=40
06:12:03 Set A/D channel type result=40
06:12:03 Set A/D encoding result=40
06:12:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:12:03 Set channel filter=0.000000e+000  result=40
06:12:03 Config A/D  Result=40
06:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:12:03 Get A/D filter: -9.255963e+061  result=40
06:12:03 Get A/D value=-858993460  result=40
06:12:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:12:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:12:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:12:03 Aux=
06:12:03 Message to Camera, serial 346748 queued
06:12:40 Received message from Master: op=PointingHead serial=346761
06:12:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:12:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:12:40 Point started: ret=0
06:12:40 point_skyscan result=0
06:12:41 Check angles
06:12:41 SkyScan query
06:12:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:12:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:12:42 Message to Master queued w/err=0: serial=346761 error=0
06:12:47 Received message from Master: op=Filter serial=346762
06:12:47 Color wheel filter change from 0 to 0
06:12:47 FLIGetFilterPos err=0  currentPosition=0
06:12:47 FLIGetStepsRemaining err=0  RemainingSteps=0
06:12:47 Filter is already there-color wheel unchanged
06:12:47 Received message from Master: op=Shutter serial=346763
06:12:47 Shutter LASER close
06:12:47 Received message from Camera: op=State serial=346765
06:12:47 GetSingleValue result=40  Value=cccccccc
06:12:47 SkyScan query
06:12:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:12:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:12:47 Parameters OK
06:12:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:12:47 Set A/D data flow result=40
06:12:47 Set A/D channel type result=40
06:12:47 Set A/D encoding result=40
06:12:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:12:47 Set channel filter=0.000000e+000  result=40
06:12:47 Config A/D  Result=40
06:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:12:47 Get A/D filter: -9.255963e+061  result=40
06:12:47 Get A/D value=-858993460  result=40
06:12:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:12:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:12:47 Parameters OK
06:12:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:12:47 Set A/D data flow result=40
06:12:47 Set A/D channel type result=40
06:12:47 Set A/D encoding result=40
06:12:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:12:47 Set channel filter=0.000000e+000  result=40
06:12:47 Config A/D  Result=40
06:12:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:12:47 Get A/D filter: -9.255963e+061  result=40
06:12:47 Get A/D value=-858993460  result=40
06:12:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:12:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:12:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:12:47 Aux=
06:12:47 Message to Camera, serial 346765 queued
06:13:24 Received message from Master: op=PointingHead serial=346778
06:13:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:13:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:13:25 Point started: ret=0
06:13:25 point_skyscan result=0
06:13:25 Check angles
06:13:25 SkyScan query
06:13:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:13:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:13:26 Message to Master queued w/err=0: serial=346778 error=0
06:13:31 Received message from Master: op=Filter serial=346779
06:13:31 Color wheel filter change from 0 to 0
06:13:31 FLIGetFilterPos err=0  currentPosition=0
06:13:31 FLIGetStepsRemaining err=0  RemainingSteps=0
06:13:31 Filter is already there-color wheel unchanged
06:13:31 Received message from Master: op=Shutter serial=346780
06:13:31 Shutter LASER close
06:13:31 Received message from Camera: op=State serial=346782
06:13:31 GetSingleValue result=40  Value=cccccccc
06:13:31 SkyScan query
06:13:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:13:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:13:32 Parameters OK
06:13:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:13:32 Set A/D data flow result=40
06:13:32 Set A/D channel type result=40
06:13:32 Set A/D encoding result=40
06:13:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:13:32 Set channel filter=0.000000e+000  result=40
06:13:32 Config A/D  Result=40
06:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:13:32 Get A/D filter: -9.255963e+061  result=40
06:13:32 Get A/D value=-858993460  result=40
06:13:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:13:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:13:32 Parameters OK
06:13:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:13:32 Set A/D data flow result=40
06:13:32 Set A/D channel type result=40
06:13:32 Set A/D encoding result=40
06:13:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:13:32 Set channel filter=0.000000e+000  result=40
06:13:32 Config A/D  Result=40
06:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:13:32 Get A/D filter: -9.255963e+061  result=40
06:13:32 Get A/D value=-858993460  result=40
06:13:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:13:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:13:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:13:32 Aux=
06:13:32 Message to Camera, serial 346782 queued
06:14:09 Received message from Master: op=PointingHead serial=346795
06:14:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:14:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:14:09 Point started: ret=0
06:14:09 point_skyscan result=0
06:14:10 Check angles
06:14:10 SkyScan query
06:14:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:14:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
[UTC 2019-3-19  06:14:10]
06:14:10 Message to Master queued w/err=0: serial=346795 error=0
06:14:15 Received message from Master: op=Filter serial=346796
06:14:15 Color wheel filter change from 0 to 0
06:14:15 FLIGetFilterPos err=0  currentPosition=0
06:14:15 FLIGetStepsRemaining err=0  RemainingSteps=0
06:14:15 Filter is already there-color wheel unchanged
06:14:15 Received message from Master: op=Shutter serial=346797
06:14:15 Shutter LASER close
06:14:15 Received message from Camera: op=State serial=346799
06:14:15 GetSingleValue result=40  Value=cccccccc
06:14:15 SkyScan query
06:14:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:14:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:14:16 Parameters OK
06:14:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:14:16 Set A/D data flow result=40
06:14:16 Set A/D channel type result=40
06:14:16 Set A/D encoding result=40
06:14:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:14:16 Set channel filter=0.000000e+000  result=40
06:14:16 Config A/D  Result=40
06:14:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:14:16 Get A/D filter: -9.255963e+061  result=40
06:14:16 Get A/D value=-858993460  result=40
06:14:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:14:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:14:16 Parameters OK
06:14:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:14:16 Set A/D data flow result=40
06:14:16 Set A/D channel type result=40
06:14:16 Set A/D encoding result=40
06:14:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:14:16 Set channel filter=0.000000e+000  result=40
06:14:16 Config A/D  Result=40
06:14:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:14:16 Get A/D filter: -9.255963e+061  result=40
06:14:16 Get A/D value=-858993460  result=40
06:14:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:14:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:14:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:14:16 Aux=
06:14:16 Message to Camera, serial 346799 queued
06:14:53 Received message from Master: op=PointingHead serial=346812
06:14:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:14:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:14:53 Point started: ret=0
06:14:53 point_skyscan result=0
06:14:54 Check angles
06:14:54 SkyScan query
06:14:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.64<-13576  Statuses=0008 0009
06:14:55 Msec=0  True Az=112.995  Ze=-23.64  Az status=0008  Ze status=0009
06:14:55 Check angles
06:14:55 SkyScan query
06:14:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.685<-14979  Statuses=0008 0009
06:14:55 Msec=750  True Az=112.995  Ze=-44.685  Az status=0008  Ze status=0009
06:14:55 Check angles
06:14:55 SkyScan query
06:14:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.985<-16399  Statuses=0008 0009
06:14:56 Msec=1500  True Az=112.995  Ze=-65.985  Az status=0008  Ze status=0009
06:14:56 Check angles
06:14:56 SkyScan query
06:14:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.375<-17825  Statuses=0008 0009
06:14:57 Msec=2250  True Az=112.995  Ze=-87.375  Az status=0008  Ze status=0009
06:14:57 Check angles
06:14:57 SkyScan query
06:14:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.75<-19250  Statuses=0008 0009
06:14:58 Msec=3000  True Az=112.995  Ze=-108.75  Az status=0008  Ze status=0009
06:14:58 Check angles
06:14:58 SkyScan query
06:14:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.72<-20648  Statuses=0008 0009
06:14:58 Msec=3750  True Az=112.995  Ze=-129.72  Az status=0008  Ze status=0009
06:14:59 Check angles
06:14:59 SkyScan query
06:14:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.66<-22044  Statuses=0008 0009
06:14:59 Msec=4500  True Az=112.995  Ze=-150.66  Az status=0008  Ze status=0009
06:14:59 Check angles
06:14:59 SkyScan query
06:15:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.375<-23425  Statuses=0008 0009
06:15:00 Msec=5250  True Az=112.995  Ze=-171.375  Az status=0008  Ze status=0009
06:15:00 Check angles
06:15:00 SkyScan query
06:15:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:15:01 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:15:01 Message to Master queued w/err=0: serial=346812 error=0
06:15:06 Received message from Master: op=Filter serial=346813
06:15:06 Color wheel filter change from 0 to 0
06:15:06 FLIGetFilterPos err=0  currentPosition=0
06:15:06 FLIGetStepsRemaining err=0  RemainingSteps=0
06:15:06 Filter is already there-color wheel unchanged
06:15:06 Received message from Master: op=Shutter serial=346814
06:15:06 Shutter LASER open
06:15:06 Received message from Camera: op=State serial=346816
06:15:06 GetSingleValue result=40  Value=cccccccc
06:15:06 SkyScan query
06:15:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:15:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:07 Parameters OK
06:15:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:07 Set A/D data flow result=40
06:15:07 Set A/D channel type result=40
06:15:07 Set A/D encoding result=40
06:15:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:07 Set channel filter=0.000000e+000  result=40
06:15:07 Config A/D  Result=40
06:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:07 Get A/D filter: -9.255963e+061  result=40
06:15:07 Get A/D value=-858993460  result=40
06:15:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:07 Parameters OK
06:15:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:07 Set A/D data flow result=40
06:15:07 Set A/D channel type result=40
06:15:07 Set A/D encoding result=40
06:15:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:07 Set channel filter=0.000000e+000  result=40
06:15:07 Config A/D  Result=40
06:15:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:07 Get A/D filter: -9.255963e+061  result=40
06:15:07 Get A/D value=-858993460  result=40
06:15:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:15:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:15:07 Aux=
06:15:07 Message to Camera, serial 346816 queued
06:15:15 Received message from Master: op=Shutter serial=346826
06:15:15 Shutter LASER close
06:15:16 Received message from Master: op=PointingHead serial=346830
06:15:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:15:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:15:16 Point started: ret=0
06:15:16 point_skyscan result=0
06:15:17 Check angles
06:15:17 SkyScan query
06:15:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
06:15:17 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
06:15:17 Check angles
06:15:17 SkyScan query
06:15:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.565<-20171  Statuses=0008 0009
06:15:18 Msec=750  True Az=112.995  Ze=-122.565  Az status=0008  Ze status=0009
06:15:18 Check angles
06:15:18 SkyScan query
06:15:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.175<-18745  Statuses=0008 0009
06:15:19 Msec=1500  True Az=112.995  Ze=-101.175  Az status=0008  Ze status=0009
06:15:19 Check angles
06:15:19 SkyScan query
06:15:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.77<-17318  Statuses=0008 0009
06:15:20 Msec=2250  True Az=112.995  Ze=-79.77  Az status=0008  Ze status=0009
06:15:20 Check angles
06:15:20 SkyScan query
06:15:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.83<-15922  Statuses=0008 0009
06:15:20 Msec=3000  True Az=112.995  Ze=-58.83  Az status=0008  Ze status=0009
06:15:20 Check angles
06:15:20 SkyScan query
06:15:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.86<-14524  Statuses=0008 0009
06:15:21 Msec=3750  True Az=112.995  Ze=-37.86  Az status=0008  Ze status=0009
06:15:21 Check angles
06:15:21 SkyScan query
06:15:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.89<-13126  Statuses=0008 0009
06:15:22 Msec=4500  True Az=112.995  Ze=-16.89  Az status=0008  Ze status=0009
06:15:22 Check angles
06:15:22 SkyScan query
06:15:23 SkyScan query done: ret=0  az=112.995<-7533  ze=4.035<-11731  Statuses=0008 0009
06:15:23 Msec=5250  True Az=112.995  Ze=4.035  Az status=0008  Ze status=0009
06:15:23 Check angles
06:15:23 SkyScan query
06:15:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:15:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:15:23 Message to Master queued w/err=0: serial=346830 error=0
06:15:28 Received message from Master: op=Filter serial=346831
06:15:28 Color wheel filter change from 0 to 0
06:15:28 FLIGetFilterPos err=0  currentPosition=0
06:15:28 FLIGetStepsRemaining err=0  RemainingSteps=0
06:15:28 Filter is already there-color wheel unchanged
06:15:28 Received message from Master: op=Shutter serial=346832
06:15:28 Shutter LASER close
06:15:29 Received message from Camera: op=State serial=346834
06:15:29 GetSingleValue result=40  Value=cccccccc
06:15:29 SkyScan query
06:15:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:15:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:29 Parameters OK
06:15:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:29 Set A/D data flow result=40
06:15:29 Set A/D channel type result=40
06:15:29 Set A/D encoding result=40
06:15:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:29 Set channel filter=0.000000e+000  result=40
06:15:29 Config A/D  Result=40
06:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:29 Get A/D filter: -9.255963e+061  result=40
06:15:29 Get A/D value=-858993460  result=40
06:15:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:29 Parameters OK
06:15:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:29 Set A/D data flow result=40
06:15:29 Set A/D channel type result=40
06:15:29 Set A/D encoding result=40
06:15:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:29 Set channel filter=0.000000e+000  result=40
06:15:29 Config A/D  Result=40
06:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:29 Get A/D filter: -9.255963e+061  result=40
06:15:29 Get A/D value=-858993460  result=40
06:15:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:15:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:15:29 Aux=
06:15:29 Message to Camera, serial 346834 queued
06:16:06 Received message from Master: op=PointingHead serial=346847
06:16:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:16:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:16:06 Point started: ret=0
06:16:06 point_skyscan result=0
06:16:07 Check angles
06:16:07 SkyScan query
06:16:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:16:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:16:08 Message to Master queued w/err=0: serial=346847 error=0
06:16:13 Received message from Master: op=Filter serial=346848
06:16:13 Color wheel filter change from 0 to 0
06:16:13 FLIGetFilterPos err=0  currentPosition=0
06:16:13 FLIGetStepsRemaining err=0  RemainingSteps=0
06:16:13 Filter is already there-color wheel unchanged
06:16:13 Received message from Master: op=Shutter serial=346849
06:16:13 Shutter LASER close
06:16:13 Received message from Camera: op=State serial=346851
06:16:13 GetSingleValue result=40  Value=cccccccc
06:16:13 SkyScan query
06:16:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:16:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:16:14 Parameters OK
06:16:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:16:14 Set A/D data flow result=40
06:16:14 Set A/D channel type result=40
06:16:14 Set A/D encoding result=40
06:16:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:16:14 Set channel filter=0.000000e+000  result=40
06:16:14 Config A/D  Result=40
06:16:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:16:14 Get A/D filter: -9.255963e+061  result=40
06:16:14 Get A/D value=-858993460  result=40
06:16:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:16:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:16:14 Parameters OK
06:16:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:16:14 Set A/D data flow result=40
06:16:14 Set A/D channel type result=40
06:16:14 Set A/D encoding result=40
06:16:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:16:14 Set channel filter=0.000000e+000  result=40
06:16:14 Config A/D  Result=40
06:16:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:16:14 Get A/D filter: -9.255963e+061  result=40
06:16:14 Get A/D value=-858993460  result=40
06:16:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:16:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:16:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:16:14 Aux=
06:16:14 Message to Camera, serial 346851 queued
06:16:50 Received message from Master: op=PointingHead serial=346864
06:16:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:16:50 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:16:51 Point started: ret=0
06:16:51 point_skyscan result=0
06:16:51 Check angles
06:16:51 SkyScan query
06:16:52 SkyScan query done: ret=0  az=135.75<-9050  ze=-6.51<-12434  Statuses=0009 0008
06:16:52 Msec=0  True Az=135.75  Ze=-6.51  Az status=0009  Ze status=0008
06:16:52 Check angles
06:16:52 SkyScan query
06:16:53 SkyScan query done: ret=0  az=153.3<-10220  ze=-6.495<-12433  Statuses=0009 0008
06:16:53 Msec=750  True Az=153.3  Ze=-6.495  Az status=0009  Ze status=0008
06:16:53 Check angles
06:16:53 SkyScan query
06:16:54 SkyScan query done: ret=0  az=170.715<-11381  ze=-6.495<-12433  Statuses=0009 0008
06:16:54 Msec=1500  True Az=170.715  Ze=-6.495  Az status=0009  Ze status=0008
06:16:54 Check angles
06:16:54 SkyScan query
06:16:54 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:16:54 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:16:54 Message to Master queued w/err=0: serial=346864 error=0
06:16:59 Received message from Master: op=Filter serial=346865
06:16:59 Color wheel filter change from 0 to 0
06:16:59 FLIGetFilterPos err=0  currentPosition=0
06:16:59 FLIGetStepsRemaining err=0  RemainingSteps=0
06:16:59 Filter is already there-color wheel unchanged
06:16:59 Received message from Master: op=Shutter serial=346866
06:16:59 Shutter LASER close
06:17:00 Received message from Camera: op=State serial=346868
06:17:00 GetSingleValue result=40  Value=cccccccc
06:17:00 SkyScan query
06:17:00 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:17:00 Parameters OK
06:17:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:17:00 Set A/D data flow result=40
06:17:00 Set A/D channel type result=40
06:17:00 Set A/D encoding result=40
06:17:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:17:00 Set channel filter=0.000000e+000  result=40
06:17:00 Config A/D  Result=40
06:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:17:00 Get A/D filter: -9.255963e+061  result=40
06:17:00 Get A/D value=-858993460  result=40
06:17:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:17:00 Parameters OK
06:17:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:17:00 Set A/D data flow result=40
06:17:00 Set A/D channel type result=40
06:17:00 Set A/D encoding result=40
06:17:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:17:00 Set channel filter=0.000000e+000  result=40
06:17:00 Config A/D  Result=40
06:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:17:00 Get A/D filter: -9.255963e+061  result=40
06:17:00 Get A/D value=-858993460  result=40
06:17:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:17:00 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:17:00 Aux=
06:17:00 Message to Camera, serial 346868 queued
06:17:37 Received message from Master: op=PointingHead serial=346881
06:17:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:17:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:17:37 Point started: ret=0
06:17:37 point_skyscan result=0
06:17:38 Check angles
06:17:38 SkyScan query
06:17:39 SkyScan query done: ret=0  az=152.655<-10177  ze=6.51<-11566  Statuses=0009 0008
06:17:39 Msec=0  True Az=152.655  Ze=6.51  Az status=0009  Ze status=0008
06:17:39 Check angles
06:17:39 SkyScan query
06:17:39 SkyScan query done: ret=0  az=135.195<-9013  ze=6.495<-11567  Statuses=0009 0008
06:17:39 Msec=750  True Az=135.195  Ze=6.495  Az status=0009  Ze status=0008
06:17:40 Check angles
06:17:40 SkyScan query
06:17:40 SkyScan query done: ret=0  az=117.36<-7824  ze=6.495<-11567  Statuses=0009 0008
06:17:40 Msec=1500  True Az=117.36  Ze=6.495  Az status=0009  Ze status=0008
06:17:40 Check angles
06:17:40 SkyScan query
06:17:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:17:41 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:17:41 Message to Master queued w/err=0: serial=346881 error=0
06:17:46 Received message from Master: op=Filter serial=346882
06:17:46 Color wheel filter change from 0 to 0
06:17:46 FLIGetFilterPos err=0  currentPosition=0
06:17:46 FLIGetStepsRemaining err=0  RemainingSteps=0
06:17:46 Filter is already there-color wheel unchanged
06:17:46 Received message from Master: op=Shutter serial=346883
06:17:46 Shutter LASER close
06:17:46 Received message from Camera: op=State serial=346885
06:17:46 GetSingleValue result=40  Value=cccccccc
06:17:46 SkyScan query
06:17:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:17:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:17:47 Parameters OK
06:17:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:17:47 Set A/D data flow result=40
06:17:47 Set A/D channel type result=40
06:17:47 Set A/D encoding result=40
06:17:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:17:47 Set channel filter=0.000000e+000  result=40
06:17:47 Config A/D  Result=40
06:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:17:47 Get A/D filter: -9.255963e+061  result=40
06:17:47 Get A/D value=-858993460  result=40
06:17:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:17:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:17:47 Parameters OK
06:17:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:17:47 Set A/D data flow result=40
06:17:47 Set A/D channel type result=40
06:17:47 Set A/D encoding result=40
06:17:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:17:47 Set channel filter=0.000000e+000  result=40
06:17:47 Config A/D  Result=40
06:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:17:47 Get A/D filter: -9.255963e+061  result=40
06:17:47 Get A/D value=-858993460  result=40
06:17:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:17:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:17:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:17:47 Aux=
06:17:47 Message to Camera, serial 346885 queued
06:18:23 Received message from Master: op=PointingHead serial=346898
06:18:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:18:23 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:18:24 Point started: ret=0
06:18:24 point_skyscan result=0
06:18:25 Check angles
06:18:25 SkyScan query
06:18:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
06:18:25 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
06:18:25 Check angles
06:18:25 SkyScan query
06:18:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.76<-14984  Statuses=0008 0009
06:18:26 Msec=750  True Az=112.995  Ze=-44.76  Az status=0008  Ze status=0009
06:18:26 Check angles
06:18:26 SkyScan query
06:18:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.135<-16409  Statuses=0008 0009
06:18:27 Msec=1500  True Az=112.995  Ze=-66.135  Az status=0008  Ze status=0009
06:18:27 Check angles
06:18:27 SkyScan query
06:18:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.525<-17835  Statuses=0008 0009
06:18:27 Msec=2250  True Az=112.995  Ze=-87.525  Az status=0008  Ze status=0009
06:18:28 Check angles
06:18:28 SkyScan query
06:18:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.9<-19260  Statuses=0008 0009
06:18:28 Msec=3000  True Az=112.995  Ze=-108.9  Az status=0008  Ze status=0009
06:18:28 Check angles
06:18:28 SkyScan query
06:18:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.855<-20657  Statuses=0008 0009
06:18:29 Msec=3750  True Az=112.995  Ze=-129.855  Az status=0008  Ze status=0009
06:18:29 Check angles
06:18:29 SkyScan query
06:18:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.81<-22054  Statuses=0008 0009
06:18:30 Msec=4500  True Az=112.995  Ze=-150.81  Az status=0008  Ze status=0009
06:18:30 Check angles
06:18:30 SkyScan query
06:18:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.48<-23432  Statuses=0008 0009
06:18:30 Msec=5250  True Az=112.995  Ze=-171.48  Az status=0008  Ze status=0009
06:18:31 Check angles
06:18:31 SkyScan query
06:18:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:18:31 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:18:31 Message to Master queued w/err=0: serial=346898 error=0
06:18:36 Received message from Master: op=Filter serial=346899
06:18:36 Color wheel filter change from 0 to 0
06:18:36 FLIGetFilterPos err=0  currentPosition=0
06:18:36 FLIGetStepsRemaining err=0  RemainingSteps=0
06:18:36 Filter is already there-color wheel unchanged
06:18:36 Received message from Master: op=Shutter serial=346900
06:18:36 Shutter LASER open
06:18:37 Received message from Camera: op=State serial=346902
06:18:37 GetSingleValue result=40  Value=cccccccc
06:18:37 SkyScan query
06:18:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:18:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:18:37 Parameters OK
06:18:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:18:37 Set A/D data flow result=40
06:18:37 Set A/D channel type result=40
06:18:37 Set A/D encoding result=40
06:18:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:18:37 Set channel filter=0.000000e+000  result=40
06:18:37 Config A/D  Result=40
06:18:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:18:37 Get A/D filter: -9.255963e+061  result=40
06:18:37 Get A/D value=-858993460  result=40
06:18:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:18:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:18:37 Parameters OK
06:18:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:18:37 Set A/D data flow result=40
06:18:37 Set A/D channel type result=40
06:18:37 Set A/D encoding result=40
06:18:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:18:37 Set channel filter=0.000000e+000  result=40
06:18:37 Config A/D  Result=40
06:18:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:18:37 Get A/D filter: -9.255963e+061  result=40
06:18:37 Get A/D value=-858993460  result=40
06:18:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:18:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:18:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:18:37 Aux=
06:18:37 Message to Camera, serial 346902 queued
06:18:46 Received message from Master: op=Shutter serial=346912
06:18:46 Shutter LASER close
06:18:46 Received message from Master: op=PointingHead serial=346916
06:18:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:18:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:18:46 Point started: ret=0
06:18:46 point_skyscan result=0
06:18:47 Check angles
06:18:47 SkyScan query
06:18:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.785<-21519  Statuses=0008 0009
06:18:48 Msec=0  True Az=112.995  Ze=-142.785  Az status=0008  Ze status=0009
06:18:48 Check angles
06:18:48 SkyScan query
06:18:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.41<-20094  Statuses=0008 0009
06:18:48 Msec=750  True Az=112.995  Ze=-121.41  Az status=0008  Ze status=0009
06:18:49 Check angles
06:18:49 SkyScan query
06:18:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.44<-18696  Statuses=0008 0009
06:18:49 Msec=1500  True Az=112.995  Ze=-100.44  Az status=0008  Ze status=0009
06:18:49 Check angles
06:18:49 SkyScan query
06:18:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.47<-17298  Statuses=0008 0009
06:18:50 Msec=2250  True Az=112.995  Ze=-79.47  Az status=0008  Ze status=0009
06:18:50 Check angles
06:18:50 SkyScan query
06:18:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.53<-15902  Statuses=0008 0009
06:18:51 Msec=3000  True Az=112.995  Ze=-58.53  Az status=0008  Ze status=0009
06:18:51 Check angles
06:18:51 SkyScan query
06:18:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.59<-14506  Statuses=0008 0009
06:18:51 Msec=3750  True Az=112.995  Ze=-37.59  Az status=0008  Ze status=0009
06:18:52 Check angles
06:18:52 SkyScan query
06:18:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.605<-13107  Statuses=0008 0009
06:18:52 Msec=4500  True Az=112.995  Ze=-16.605  Az status=0008  Ze status=0009
06:18:52 Check angles
06:18:52 SkyScan query
06:18:53 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
06:18:53 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
06:18:53 Check angles
06:18:53 SkyScan query
06:18:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:18:54 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:18:54 Message to Master queued w/err=0: serial=346916 error=0
06:18:59 Received message from Master: op=Filter serial=346917
06:18:59 Color wheel filter change from 0 to 0
06:18:59 FLIGetFilterPos err=0  currentPosition=0
06:18:59 FLIGetStepsRemaining err=0  RemainingSteps=0
06:18:59 Filter is already there-color wheel unchanged
06:18:59 Received message from Master: op=Shutter serial=346918
06:18:59 Shutter LASER close
06:18:59 Received message from Camera: op=State serial=346920
06:18:59 GetSingleValue result=40  Value=cccccccc
06:18:59 SkyScan query
06:19:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:19:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:19:00 Parameters OK
06:19:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:19:00 Set A/D data flow result=40
06:19:00 Set A/D channel type result=40
06:19:00 Set A/D encoding result=40
06:19:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:19:00 Set channel filter=0.000000e+000  result=40
06:19:00 Config A/D  Result=40
06:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:19:00 Get A/D filter: -9.255963e+061  result=40
06:19:00 Get A/D value=-858993460  result=40
06:19:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:19:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:19:00 Parameters OK
06:19:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:19:00 Set A/D data flow result=40
06:19:00 Set A/D channel type result=40
06:19:00 Set A/D encoding result=40
06:19:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:19:00 Set channel filter=0.000000e+000  result=40
06:19:00 Config A/D  Result=40
06:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:19:00 Get A/D filter: -9.255963e+061  result=40
06:19:00 Get A/D value=-858993460  result=40
06:19:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:19:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:19:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:19:00 Aux=
06:19:00 Message to Camera, serial 346920 queued
06:19:36 Received message from Master: op=PointingHead serial=346933
06:19:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:19:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:19:37 Point started: ret=0
06:19:37 point_skyscan result=0
06:19:38 Check angles
06:19:38 SkyScan query
06:19:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:19:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:19:38 Message to Master queued w/err=0: serial=346933 error=0
06:19:43 Received message from Master: op=Filter serial=346934
06:19:43 Color wheel filter change from 0 to 0
06:19:43 FLIGetFilterPos err=0  currentPosition=0
06:19:43 FLIGetStepsRemaining err=0  RemainingSteps=0
06:19:43 Filter is already there-color wheel unchanged
06:19:43 Received message from Master: op=Shutter serial=346935
06:19:43 Shutter LASER close
06:19:43 Received message from Camera: op=State serial=346937
06:19:43 GetSingleValue result=40  Value=cccccccc
06:19:43 SkyScan query
06:19:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:19:44 Parameters OK
06:19:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:19:44 Set A/D data flow result=40
06:19:44 Set A/D channel type result=40
06:19:44 Set A/D encoding result=40
06:19:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:19:44 Set channel filter=0.000000e+000  result=40
06:19:44 Config A/D  Result=40
06:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:19:44 Get A/D filter: -9.255963e+061  result=40
06:19:44 Get A/D value=-858993460  result=40
06:19:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:19:44 Parameters OK
06:19:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:19:44 Set A/D data flow result=40
06:19:44 Set A/D channel type result=40
06:19:44 Set A/D encoding result=40
06:19:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:19:44 Set channel filter=0.000000e+000  result=40
06:19:44 Config A/D  Result=40
06:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:19:44 Get A/D filter: -9.255963e+061  result=40
06:19:44 Get A/D value=-858993460  result=40
06:19:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:19:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:19:44 Aux=
06:19:44 Message to Camera, serial 346937 queued
06:20:21 Received message from Master: op=PointingHead serial=346950
06:20:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:20:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:20:21 Point started: ret=0
06:20:21 point_skyscan result=0
06:20:22 Check angles
06:20:22 SkyScan query
06:20:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:20:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:20:23 Message to Master queued w/err=0: serial=346950 error=0
06:20:28 Received message from Master: op=Filter serial=346951
06:20:28 Color wheel filter change from 0 to 0
06:20:28 FLIGetFilterPos err=0  currentPosition=0
06:20:28 FLIGetStepsRemaining err=0  RemainingSteps=0
06:20:28 Filter is already there-color wheel unchanged
06:20:28 Received message from Master: op=Shutter serial=346952
06:20:28 Shutter LASER close
06:20:28 Received message from Camera: op=State serial=346954
06:20:28 GetSingleValue result=40  Value=cccccccc
06:20:28 SkyScan query
06:20:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:20:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:20:28 Parameters OK
06:20:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:20:28 Set A/D data flow result=40
06:20:28 Set A/D channel type result=40
06:20:28 Set A/D encoding result=40
06:20:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:20:28 Set channel filter=0.000000e+000  result=40
06:20:28 Config A/D  Result=40
06:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:20:28 Get A/D filter: -9.255963e+061  result=40
06:20:28 Get A/D value=-858993460  result=40
06:20:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:20:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:20:28 Parameters OK
06:20:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:20:28 Set A/D data flow result=40
06:20:28 Set A/D channel type result=40
06:20:28 Set A/D encoding result=40
06:20:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:20:28 Set channel filter=0.000000e+000  result=40
06:20:28 Config A/D  Result=40
06:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:20:28 Get A/D filter: -9.255963e+061  result=40
06:20:28 Get A/D value=-858993460  result=40
06:20:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:20:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:20:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:20:28 Aux=
06:20:28 Message to Camera, serial 346954 queued
06:21:05 Received message from Master: op=PointingHead serial=346967
06:21:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:21:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:21:06 Point started: ret=0
06:21:06 point_skyscan result=0
06:21:06 Check angles
06:21:06 SkyScan query
06:21:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:21:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:21:07 Message to Master queued w/err=0: serial=346967 error=0
06:21:12 Received message from Master: op=Filter serial=346968
06:21:12 Color wheel filter change from 0 to 0
06:21:12 FLIGetFilterPos err=0  currentPosition=0
06:21:12 FLIGetStepsRemaining err=0  RemainingSteps=0
06:21:12 Filter is already there-color wheel unchanged
06:21:12 Received message from Master: op=Shutter serial=346969
06:21:12 Shutter LASER close
06:21:12 Received message from Camera: op=State serial=346971
06:21:12 GetSingleValue result=40  Value=cccccccc
06:21:12 SkyScan query
06:21:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:21:13 Parameters OK
06:21:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:21:13 Set A/D data flow result=40
06:21:13 Set A/D channel type result=40
06:21:13 Set A/D encoding result=40
06:21:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:21:13 Set channel filter=0.000000e+000  result=40
06:21:13 Config A/D  Result=40
06:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:21:13 Get A/D filter: -9.255963e+061  result=40
06:21:13 Get A/D value=-858993460  result=40
06:21:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:21:13 Parameters OK
06:21:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:21:13 Set A/D data flow result=40
06:21:13 Set A/D channel type result=40
06:21:13 Set A/D encoding result=40
06:21:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:21:13 Set channel filter=0.000000e+000  result=40
06:21:13 Config A/D  Result=40
06:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:21:13 Get A/D filter: -9.255963e+061  result=40
06:21:13 Get A/D value=-858993460  result=40
06:21:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:21:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:21:13 Aux=
06:21:13 Message to Camera, serial 346971 queued
06:21:50 Received message from Master: op=PointingHead serial=346984
06:21:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:21:50 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:21:50 Point started: ret=0
06:21:50 point_skyscan result=0
06:21:51 Check angles
06:21:51 SkyScan query
06:21:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
06:21:51 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
06:21:51 Check angles
06:21:51 SkyScan query
06:21:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
06:21:52 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
06:21:52 Check angles
06:21:52 SkyScan query
06:21:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
06:21:53 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
06:21:53 Check angles
06:21:53 SkyScan query
06:21:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
06:21:53 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
06:21:54 Check angles
06:21:54 SkyScan query
06:21:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
06:21:54 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
06:21:54 Check angles
06:21:54 SkyScan query
06:21:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.015<-20601  Statuses=0008 0009
06:21:55 Msec=3750  True Az=112.995  Ze=-129.015  Az status=0008  Ze status=0009
06:21:55 Check angles
06:21:55 SkyScan query
06:21:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.42<-22028  Statuses=0008 0009
06:21:56 Msec=4500  True Az=112.995  Ze=-150.42  Az status=0008  Ze status=0009
06:21:56 Check angles
06:21:56 SkyScan query
06:21:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.195<-23413  Statuses=0008 0009
06:21:56 Msec=5250  True Az=112.995  Ze=-171.195  Az status=0008  Ze status=0009
06:21:57 Check angles
06:21:57 SkyScan query
06:21:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:21:57 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:21:57 Message to Master queued w/err=0: serial=346984 error=0
06:22:02 Received message from Master: op=Filter serial=346985
06:22:02 Color wheel filter change from 0 to 0
06:22:02 FLIGetFilterPos err=0  currentPosition=0
06:22:02 FLIGetStepsRemaining err=0  RemainingSteps=0
06:22:02 Filter is already there-color wheel unchanged
06:22:02 Received message from Master: op=Shutter serial=346986
06:22:02 Shutter LASER open
06:22:03 Received message from Camera: op=State serial=346988
06:22:03 GetSingleValue result=40  Value=cccccccc
06:22:03 SkyScan query
06:22:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:22:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:03 Parameters OK
06:22:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:03 Set A/D data flow result=40
06:22:03 Set A/D channel type result=40
06:22:03 Set A/D encoding result=40
06:22:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:03 Set channel filter=0.000000e+000  result=40
06:22:03 Config A/D  Result=40
06:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:03 Get A/D filter: -9.255963e+061  result=40
06:22:03 Get A/D value=-858993460  result=40
06:22:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:03 Parameters OK
06:22:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:03 Set A/D data flow result=40
06:22:03 Set A/D channel type result=40
06:22:03 Set A/D encoding result=40
06:22:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:03 Set channel filter=0.000000e+000  result=40
06:22:03 Config A/D  Result=40
06:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:03 Get A/D filter: -9.255963e+061  result=40
06:22:03 Get A/D value=-858993460  result=40
06:22:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:22:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:22:03 Aux=
06:22:03 Message to Camera, serial 346988 queued
06:22:12 Received message from Master: op=Shutter serial=346998
06:22:12 Shutter LASER close
06:22:12 Received message from Master: op=PointingHead serial=347002
06:22:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:22:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:22:13 Point started: ret=0
06:22:13 point_skyscan result=0
06:22:13 Check angles
06:22:13 SkyScan query
06:22:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.785<-21519  Statuses=0008 0009
06:22:14 Msec=0  True Az=112.995  Ze=-142.785  Az status=0008  Ze status=0009
06:22:14 Check angles
06:22:14 SkyScan query
06:22:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.8<-20120  Statuses=0008 0009
06:22:15 Msec=750  True Az=112.995  Ze=-121.8  Az status=0008  Ze status=0009
06:22:15 Check angles
06:22:15 SkyScan query
06:22:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.875<-18725  Statuses=0008 0009
06:22:15 Msec=1500  True Az=112.995  Ze=-100.875  Az status=0008  Ze status=0009
06:22:16 Check angles
06:22:16 SkyScan query
06:22:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.935<-17329  Statuses=0008 0009
06:22:16 Msec=2250  True Az=112.995  Ze=-79.935  Az status=0008  Ze status=0009
06:22:16 Check angles
06:22:16 SkyScan query
06:22:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
06:22:17 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
06:22:17 Check angles
06:22:17 SkyScan query
06:22:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.575<-14505  Statuses=0008 0009
06:22:18 Msec=3750  True Az=112.995  Ze=-37.575  Az status=0008  Ze status=0009
06:22:18 Check angles
06:22:18 SkyScan query
06:22:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.605<-13107  Statuses=0008 0009
06:22:18 Msec=4500  True Az=112.995  Ze=-16.605  Az status=0008  Ze status=0009
06:22:19 Check angles
06:22:19 SkyScan query
06:22:19 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
06:22:19 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
06:22:19 Check angles
06:22:19 SkyScan query
06:22:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:22:20 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:22:20 Message to Master queued w/err=0: serial=347002 error=0
06:22:25 Received message from Master: op=Filter serial=347003
06:22:25 Color wheel filter change from 0 to 0
06:22:25 FLIGetFilterPos err=0  currentPosition=0
06:22:25 FLIGetStepsRemaining err=0  RemainingSteps=0
06:22:25 Filter is already there-color wheel unchanged
06:22:25 Received message from Master: op=Shutter serial=347004
06:22:25 Shutter LASER close
06:22:25 Received message from Camera: op=State serial=347006
06:22:25 GetSingleValue result=40  Value=cccccccc
06:22:25 SkyScan query
06:22:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:26 Parameters OK
06:22:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:26 Set A/D data flow result=40
06:22:26 Set A/D channel type result=40
06:22:26 Set A/D encoding result=40
06:22:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:26 Set channel filter=0.000000e+000  result=40
06:22:26 Config A/D  Result=40
06:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:26 Get A/D filter: -9.255963e+061  result=40
06:22:26 Get A/D value=-858993460  result=40
06:22:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:26 Parameters OK
06:22:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:26 Set A/D data flow result=40
06:22:26 Set A/D channel type result=40
06:22:26 Set A/D encoding result=40
06:22:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:26 Set channel filter=0.000000e+000  result=40
06:22:26 Config A/D  Result=40
06:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:26 Get A/D filter: -9.255963e+061  result=40
06:22:26 Get A/D value=-858993460  result=40
06:22:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:22:26 Aux=
06:22:26 Message to Camera, serial 347006 queued
06:23:03 Received message from Master: op=PointingHead serial=347019
06:23:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:23:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:23:03 Point started: ret=0
06:23:03 point_skyscan result=0
06:23:04 Check angles
06:23:04 SkyScan query
06:23:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:23:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:23:04 Message to Master queued w/err=0: serial=347019 error=0
06:23:09 Received message from Master: op=Filter serial=347020
06:23:09 Color wheel filter change from 0 to 0
06:23:09 FLIGetFilterPos err=0  currentPosition=0
06:23:09 FLIGetStepsRemaining err=0  RemainingSteps=0
06:23:09 Filter is already there-color wheel unchanged
06:23:09 Received message from Master: op=Shutter serial=347021
06:23:09 Shutter LASER close
06:23:10 Received message from Camera: op=State serial=347023
06:23:10 GetSingleValue result=40  Value=cccccccc
06:23:10 SkyScan query
06:23:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:23:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:23:10 Parameters OK
06:23:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:23:10 Set A/D data flow result=40
06:23:10 Set A/D channel type result=40
06:23:10 Set A/D encoding result=40
06:23:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:23:10 Set channel filter=0.000000e+000  result=40
06:23:10 Config A/D  Result=40
06:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:23:10 Get A/D filter: -9.255963e+061  result=40
06:23:10 Get A/D value=-858993460  result=40
06:23:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:23:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:23:10 Parameters OK
06:23:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:23:10 Set A/D data flow result=40
06:23:10 Set A/D channel type result=40
06:23:10 Set A/D encoding result=40
06:23:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:23:10 Set channel filter=0.000000e+000  result=40
06:23:10 Config A/D  Result=40
06:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:23:10 Get A/D filter: -9.255963e+061  result=40
06:23:10 Get A/D value=-858993460  result=40
06:23:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:23:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:23:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:23:10 Aux=
06:23:10 Message to Camera, serial 347023 queued
06:23:47 Received message from Master: op=PointingHead serial=347036
06:23:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:23:47 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:23:47 Point started: ret=0
06:23:47 point_skyscan result=0
[UTC 2019-3-19  06:23:48]
06:23:48 Check angles
06:23:48 SkyScan query
06:23:49 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
06:23:49 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
06:23:49 Check angles
06:23:49 SkyScan query
06:23:49 SkyScan query done: ret=0  az=153.78<-10252  ze=-6.495<-12433  Statuses=0009 0008
06:23:49 Msec=750  True Az=153.78  Ze=-6.495  Az status=0009  Ze status=0008
06:23:50 Check angles
06:23:50 SkyScan query
06:23:50 SkyScan query done: ret=0  az=171.255<-11417  ze=-6.495<-12433  Statuses=0009 0008
06:23:50 Msec=1500  True Az=171.255  Ze=-6.495  Az status=0009  Ze status=0008
06:23:50 Check angles
06:23:50 SkyScan query
06:23:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:23:51 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:23:51 Message to Master queued w/err=0: serial=347036 error=0
06:23:56 Received message from Master: op=Filter serial=347037
06:23:56 Color wheel filter change from 0 to 0
06:23:56 FLIGetFilterPos err=0  currentPosition=0
06:23:56 FLIGetStepsRemaining err=0  RemainingSteps=0
06:23:56 Filter is already there-color wheel unchanged
06:23:56 Received message from Master: op=Shutter serial=347038
06:23:56 Shutter LASER close
06:23:56 Received message from Camera: op=State serial=347040
06:23:56 GetSingleValue result=40  Value=cccccccc
06:23:56 SkyScan query
06:23:57 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:23:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:23:57 Parameters OK
06:23:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:23:57 Set A/D data flow result=40
06:23:57 Set A/D channel type result=40
06:23:57 Set A/D encoding result=40
06:23:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:23:57 Set channel filter=0.000000e+000  result=40
06:23:57 Config A/D  Result=40
06:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:23:57 Get A/D filter: -9.255963e+061  result=40
06:23:57 Get A/D value=-858993460  result=40
06:23:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:23:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:23:57 Parameters OK
06:23:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:23:57 Set A/D data flow result=40
06:23:57 Set A/D channel type result=40
06:23:57 Set A/D encoding result=40
06:23:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:23:57 Set channel filter=0.000000e+000  result=40
06:23:57 Config A/D  Result=40
06:23:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:23:57 Get A/D filter: -9.255963e+061  result=40
06:23:57 Get A/D value=-858993460  result=40
06:23:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:23:57 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:23:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:23:57 Aux=
06:23:57 Message to Camera, serial 347040 queued
06:24:33 Received message from Master: op=PointingHead serial=347053
06:24:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:24:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:24:34 Point started: ret=0
06:24:34 point_skyscan result=0
06:24:35 Check angles
06:24:35 SkyScan query
06:24:35 SkyScan query done: ret=0  az=152.865<-10191  ze=6.51<-11566  Statuses=0009 0008
06:24:35 Msec=0  True Az=152.865  Ze=6.51  Az status=0009  Ze status=0008
06:24:35 Check angles
06:24:35 SkyScan query
06:24:36 SkyScan query done: ret=0  az=135.435<-9029  ze=6.495<-11567  Statuses=0009 0008
06:24:36 Msec=750  True Az=135.435  Ze=6.495  Az status=0009  Ze status=0008
06:24:36 Check angles
06:24:36 SkyScan query
06:24:37 SkyScan query done: ret=0  az=117.87<-7858  ze=6.495<-11567  Statuses=0009 0008
06:24:37 Msec=1500  True Az=117.87  Ze=6.495  Az status=0009  Ze status=0008
06:24:37 Check angles
06:24:37 SkyScan query
06:24:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:24:37 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:24:37 Message to Master queued w/err=0: serial=347053 error=0
06:24:42 Received message from Master: op=Filter serial=347054
06:24:42 Color wheel filter change from 0 to 0
06:24:42 FLIGetFilterPos err=0  currentPosition=0
06:24:42 FLIGetStepsRemaining err=0  RemainingSteps=0
06:24:42 Filter is already there-color wheel unchanged
06:24:43 Received message from Master: op=Shutter serial=347055
06:24:43 Shutter LASER close
06:24:43 Received message from Camera: op=State serial=347057
06:24:43 GetSingleValue result=40  Value=cccccccc
06:24:43 SkyScan query
06:24:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:24:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:24:43 Parameters OK
06:24:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:24:43 Set A/D data flow result=40
06:24:43 Set A/D channel type result=40
06:24:43 Set A/D encoding result=40
06:24:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:24:43 Set channel filter=0.000000e+000  result=40
06:24:43 Config A/D  Result=40
06:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:24:43 Get A/D filter: -9.255963e+061  result=40
06:24:43 Get A/D value=-858993460  result=40
06:24:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:24:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:24:43 Parameters OK
06:24:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:24:43 Set A/D data flow result=40
06:24:43 Set A/D channel type result=40
06:24:43 Set A/D encoding result=40
06:24:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:24:43 Set channel filter=0.000000e+000  result=40
06:24:43 Config A/D  Result=40
06:24:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:24:43 Get A/D filter: -9.255963e+061  result=40
06:24:43 Get A/D value=-858993460  result=40
06:24:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:24:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:24:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:24:43 Aux=
06:24:43 Message to Camera, serial 347057 queued
06:25:19 Received message from Master: op=PointingHead serial=347069
06:25:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:25:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:25:19 Point started: ret=0
06:25:19 point_skyscan result=0
06:25:20 Check angles
06:25:20 SkyScan query
06:25:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
06:25:21 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
06:25:21 Check angles
06:25:21 SkyScan query
06:25:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.76<-14984  Statuses=0008 0009
06:25:22 Msec=750  True Az=112.995  Ze=-44.76  Az status=0008  Ze status=0009
06:25:22 Check angles
06:25:22 SkyScan query
06:25:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
06:25:22 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
06:25:23 Check angles
06:25:23 SkyScan query
06:25:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.105<-17807  Statuses=0008 0009
06:25:23 Msec=2250  True Az=112.995  Ze=-87.105  Az status=0008  Ze status=0009
06:25:23 Check angles
06:25:23 SkyScan query
06:25:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.48<-19232  Statuses=0008 0009
06:25:24 Msec=3000  True Az=112.995  Ze=-108.48  Az status=0008  Ze status=0009
06:25:24 Check angles
06:25:24 SkyScan query
06:25:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.45<-20630  Statuses=0008 0009
06:25:25 Msec=3750  True Az=112.995  Ze=-129.45  Az status=0008  Ze status=0009
06:25:25 Check angles
06:25:25 SkyScan query
06:25:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.405<-22027  Statuses=0008 0009
06:25:25 Msec=4500  True Az=112.995  Ze=-150.405  Az status=0008  Ze status=0009
06:25:26 Check angles
06:25:26 SkyScan query
06:25:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.18<-23412  Statuses=0008 0009
06:25:26 Msec=5250  True Az=112.995  Ze=-171.18  Az status=0008  Ze status=0009
06:25:26 Check angles
06:25:26 SkyScan query
06:25:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:25:27 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:25:27 Message to Master queued w/err=0: serial=347069 error=0
06:25:32 Received message from Master: op=Filter serial=347070
06:25:32 Color wheel filter change from 0 to 0
06:25:32 FLIGetFilterPos err=0  currentPosition=0
06:25:32 FLIGetStepsRemaining err=0  RemainingSteps=0
06:25:32 Filter is already there-color wheel unchanged
06:25:32 Received message from Master: op=Shutter serial=347071
06:25:32 Shutter LASER open
06:25:32 Received message from Camera: op=State serial=347073
06:25:32 GetSingleValue result=40  Value=cccccccc
06:25:32 SkyScan query
06:25:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:33 Parameters OK
06:25:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:33 Set A/D data flow result=40
06:25:33 Set A/D channel type result=40
06:25:33 Set A/D encoding result=40
06:25:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:33 Set channel filter=0.000000e+000  result=40
06:25:33 Config A/D  Result=40
06:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:33 Get A/D filter: -9.255963e+061  result=40
06:25:33 Get A/D value=-858993460  result=40
06:25:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:33 Parameters OK
06:25:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:33 Set A/D data flow result=40
06:25:33 Set A/D channel type result=40
06:25:33 Set A/D encoding result=40
06:25:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:33 Set channel filter=0.000000e+000  result=40
06:25:33 Config A/D  Result=40
06:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:33 Get A/D filter: -9.255963e+061  result=40
06:25:33 Get A/D value=-858993460  result=40
06:25:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:25:33 Aux=
06:25:33 Message to Camera, serial 347073 queued
06:25:41 Received message from Master: op=Shutter serial=347083
06:25:41 Shutter LASER close
06:25:42 Received message from Master: op=PointingHead serial=347087
06:25:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:25:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:25:42 Point started: ret=0
06:25:42 point_skyscan result=0
06:25:43 Check angles
06:25:43 SkyScan query
06:25:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.755<-21517  Statuses=0008 0009
06:25:43 Msec=0  True Az=112.995  Ze=-142.755  Az status=0008  Ze status=0009
06:25:43 Check angles
06:25:43 SkyScan query
06:25:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.785<-20119  Statuses=0008 0009
06:25:44 Msec=750  True Az=112.995  Ze=-121.785  Az status=0008  Ze status=0009
06:25:44 Check angles
06:25:44 SkyScan query
06:25:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
06:25:45 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
06:25:45 Check angles
06:25:45 SkyScan query
06:25:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.44<-17296  Statuses=0008 0009
06:25:46 Msec=2250  True Az=112.995  Ze=-79.44  Az status=0008  Ze status=0009
06:25:46 Check angles
06:25:46 SkyScan query
06:25:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.035<-15869  Statuses=0008 0009
06:25:46 Msec=3000  True Az=112.995  Ze=-58.035  Az status=0008  Ze status=0009
06:25:47 Check angles
06:25:47 SkyScan query
06:25:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.11<-14474  Statuses=0008 0009
06:25:47 Msec=3750  True Az=112.995  Ze=-37.11  Az status=0008  Ze status=0009
06:25:47 Check angles
06:25:47 SkyScan query
06:25:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.125<-13075  Statuses=0008 0009
06:25:48 Msec=4500  True Az=112.995  Ze=-16.125  Az status=0008  Ze status=0009
06:25:48 Check angles
06:25:48 SkyScan query
06:25:49 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
06:25:49 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
06:25:49 Check angles
06:25:49 SkyScan query
06:25:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:25:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:25:49 Message to Master queued w/err=0: serial=347087 error=0
06:25:54 Received message from Master: op=Filter serial=347088
06:25:54 Color wheel filter change from 0 to 0
06:25:54 FLIGetFilterPos err=0  currentPosition=0
06:25:54 FLIGetStepsRemaining err=0  RemainingSteps=0
06:25:54 Filter is already there-color wheel unchanged
06:25:55 Received message from Master: op=Shutter serial=347089
06:25:55 Shutter LASER close
06:25:55 Received message from Camera: op=State serial=347091
06:25:55 GetSingleValue result=40  Value=cccccccc
06:25:55 SkyScan query
06:25:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:25:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:55 Parameters OK
06:25:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:55 Set A/D data flow result=40
06:25:55 Set A/D channel type result=40
06:25:55 Set A/D encoding result=40
06:25:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:55 Set channel filter=0.000000e+000  result=40
06:25:55 Config A/D  Result=40
06:25:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:55 Get A/D filter: -9.255963e+061  result=40
06:25:55 Get A/D value=-858993460  result=40
06:25:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:55 Parameters OK
06:25:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:55 Set A/D data flow result=40
06:25:55 Set A/D channel type result=40
06:25:55 Set A/D encoding result=40
06:25:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:55 Set channel filter=0.000000e+000  result=40
06:25:55 Config A/D  Result=40
06:25:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:55 Get A/D filter: -9.255963e+061  result=40
06:25:55 Get A/D value=-858993460  result=40
06:25:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:25:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:25:55 Aux=
06:25:55 Message to Camera, serial 347091 queued
06:26:32 Received message from Master: op=PointingHead serial=347104
06:26:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:26:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:26:32 Point started: ret=0
06:26:32 point_skyscan result=0
06:26:33 Check angles
06:26:33 SkyScan query
06:26:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:26:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:26:34 Message to Master queued w/err=0: serial=347104 error=0
06:26:39 Received message from Master: op=Filter serial=347105
06:26:39 Color wheel filter change from 0 to 0
06:26:39 FLIGetFilterPos err=0  currentPosition=0
06:26:39 FLIGetStepsRemaining err=0  RemainingSteps=0
06:26:39 Filter is already there-color wheel unchanged
06:26:39 Received message from Master: op=Shutter serial=347106
06:26:39 Shutter LASER close
06:26:39 Received message from Camera: op=State serial=347108
06:26:39 GetSingleValue result=40  Value=cccccccc
06:26:39 SkyScan query
06:26:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:26:40 Parameters OK
06:26:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:26:40 Set A/D data flow result=40
06:26:40 Set A/D channel type result=40
06:26:40 Set A/D encoding result=40
06:26:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:26:40 Set channel filter=0.000000e+000  result=40
06:26:40 Config A/D  Result=40
06:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:26:40 Get A/D filter: -9.255963e+061  result=40
06:26:40 Get A/D value=-858993460  result=40
06:26:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:26:40 Parameters OK
06:26:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:26:40 Set A/D data flow result=40
06:26:40 Set A/D channel type result=40
06:26:40 Set A/D encoding result=40
06:26:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:26:40 Set channel filter=0.000000e+000  result=40
06:26:40 Config A/D  Result=40
06:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:26:40 Get A/D filter: -9.255963e+061  result=40
06:26:40 Get A/D value=-858993460  result=40
06:26:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:26:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:26:40 Aux=
06:26:40 Message to Camera, serial 347108 queued
06:27:16 Received message from Master: op=PointingHead serial=347121
06:27:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:27:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:27:17 Point started: ret=0
06:27:17 point_skyscan result=0
06:27:17 Check angles
06:27:17 SkyScan query
06:27:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:27:18 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:27:18 Message to Master queued w/err=0: serial=347121 error=0
06:27:23 Received message from Master: op=Filter serial=347122
06:27:23 Color wheel filter change from 0 to 0
06:27:23 FLIGetFilterPos err=0  currentPosition=0
06:27:23 FLIGetStepsRemaining err=0  RemainingSteps=0
06:27:23 Filter is already there-color wheel unchanged
06:27:23 Received message from Master: op=Shutter serial=347123
06:27:23 Shutter LASER close
06:27:23 Received message from Camera: op=State serial=347125
06:27:23 GetSingleValue result=40  Value=cccccccc
06:27:23 SkyScan query
06:27:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:27:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:27:24 Parameters OK
06:27:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:27:24 Set A/D data flow result=40
06:27:24 Set A/D channel type result=40
06:27:24 Set A/D encoding result=40
06:27:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:27:24 Set channel filter=0.000000e+000  result=40
06:27:24 Config A/D  Result=40
06:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:27:24 Get A/D filter: -9.255963e+061  result=40
06:27:24 Get A/D value=-858993460  result=40
06:27:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:27:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:27:24 Parameters OK
06:27:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:27:24 Set A/D data flow result=40
06:27:24 Set A/D channel type result=40
06:27:24 Set A/D encoding result=40
06:27:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:27:24 Set channel filter=0.000000e+000  result=40
06:27:24 Config A/D  Result=40
06:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:27:24 Get A/D filter: -9.255963e+061  result=40
06:27:24 Get A/D value=-858993460  result=40
06:27:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:27:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:27:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:27:24 Aux=
06:27:24 Message to Camera, serial 347125 queued
06:28:01 Received message from Master: op=PointingHead serial=347138
06:28:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:28:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:28:01 Point started: ret=0
06:28:01 point_skyscan result=0
06:28:02 Check angles
06:28:02 SkyScan query
06:28:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
06:28:02 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
06:28:02 Message to Master queued w/err=0: serial=347138 error=0
06:28:07 Received message from Master: op=Filter serial=347139
06:28:07 Color wheel filter change from 0 to 0
06:28:07 FLIGetFilterPos err=0  currentPosition=0
06:28:07 FLIGetStepsRemaining err=0  RemainingSteps=0
06:28:07 Filter is already there-color wheel unchanged
06:28:08 Received message from Master: op=Shutter serial=347140
06:28:08 Shutter LASER close
06:28:08 Received message from Camera: op=State serial=347142
06:28:08 GetSingleValue result=40  Value=cccccccc
06:28:08 SkyScan query
06:28:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:28:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:08 Parameters OK
06:28:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:08 Set A/D data flow result=40
06:28:08 Set A/D channel type result=40
06:28:08 Set A/D encoding result=40
06:28:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:08 Set channel filter=0.000000e+000  result=40
06:28:08 Config A/D  Result=40
06:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:08 Get A/D filter: -9.255963e+061  result=40
06:28:08 Get A/D value=-858993460  result=40
06:28:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:08 Parameters OK
06:28:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:08 Set A/D data flow result=40
06:28:08 Set A/D channel type result=40
06:28:08 Set A/D encoding result=40
06:28:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:08 Set channel filter=0.000000e+000  result=40
06:28:08 Config A/D  Result=40
06:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:08 Get A/D filter: -9.255963e+061  result=40
06:28:08 Get A/D value=-858993460  result=40
06:28:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:28:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:28:08 Aux=
06:28:08 Message to Camera, serial 347142 queued
06:28:45 Received message from Master: op=PointingHead serial=347155
06:28:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:28:45 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:28:45 Point started: ret=0
06:28:45 point_skyscan result=0
06:28:46 Check angles
06:28:46 SkyScan query
06:28:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.355<-13557  Statuses=0008 0009
06:28:47 Msec=0  True Az=112.995  Ze=-23.355  Az status=0008  Ze status=0009
06:28:47 Check angles
06:28:47 SkyScan query
06:28:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
06:28:47 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
06:28:48 Check angles
06:28:48 SkyScan query
06:28:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.28<-16352  Statuses=0008 0009
06:28:48 Msec=1500  True Az=112.995  Ze=-65.28  Az status=0008  Ze status=0009
06:28:48 Check angles
06:28:48 SkyScan query
06:28:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.22<-17748  Statuses=0008 0009
06:28:49 Msec=2250  True Az=112.995  Ze=-86.22  Az status=0008  Ze status=0009
06:28:49 Check angles
06:28:49 SkyScan query
06:28:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.16<-19144  Statuses=0008 0009
06:28:50 Msec=3000  True Az=112.995  Ze=-107.16  Az status=0008  Ze status=0009
06:28:50 Check angles
06:28:50 SkyScan query
06:28:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.13<-20542  Statuses=0008 0009
06:28:50 Msec=3750  True Az=112.995  Ze=-128.13  Az status=0008  Ze status=0009
06:28:51 Check angles
06:28:51 SkyScan query
06:28:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.085<-21939  Statuses=0008 0009
06:28:51 Msec=4500  True Az=112.995  Ze=-149.085  Az status=0008  Ze status=0009
06:28:51 Check angles
06:28:51 SkyScan query
06:28:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.025<-23335  Statuses=0008 0009
06:28:52 Msec=5250  True Az=112.995  Ze=-170.025  Az status=0008  Ze status=0009
06:28:52 Check angles
06:28:52 SkyScan query
06:28:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:28:53 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:28:53 Message to Master queued w/err=0: serial=347155 error=0
06:28:58 Received message from Master: op=Filter serial=347156
06:28:58 Color wheel filter change from 0 to 0
06:28:58 FLIGetFilterPos err=0  currentPosition=0
06:28:58 FLIGetStepsRemaining err=0  RemainingSteps=0
06:28:58 Filter is already there-color wheel unchanged
06:28:58 Received message from Master: op=Shutter serial=347157
06:28:58 Shutter LASER open
06:28:58 Received message from Camera: op=State serial=347159
06:28:58 GetSingleValue result=40  Value=cccccccc
06:28:58 SkyScan query
06:28:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:28:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:59 Parameters OK
06:28:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:59 Set A/D data flow result=40
06:28:59 Set A/D channel type result=40
06:28:59 Set A/D encoding result=40
06:28:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:59 Set channel filter=0.000000e+000  result=40
06:28:59 Config A/D  Result=40
06:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:59 Get A/D filter: -9.255963e+061  result=40
06:28:59 Get A/D value=-858993460  result=40
06:28:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:59 Parameters OK
06:28:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:59 Set A/D data flow result=40
06:28:59 Set A/D channel type result=40
06:28:59 Set A/D encoding result=40
06:28:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:59 Set channel filter=0.000000e+000  result=40
06:28:59 Config A/D  Result=40
06:28:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:59 Get A/D filter: -9.255963e+061  result=40
06:28:59 Get A/D value=-858993460  result=40
06:28:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:28:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:28:59 Aux=
06:28:59 Message to Camera, serial 347159 queued
06:29:07 Received message from Master: op=Shutter serial=347169
06:29:07 Shutter LASER close
06:29:08 Received message from Master: op=PointingHead serial=347173
06:29:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:29:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:29:08 Point started: ret=0
06:29:08 point_skyscan result=0
06:29:09 Check angles
06:29:09 SkyScan query
06:29:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
06:29:09 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
06:29:09 Check angles
06:29:09 SkyScan query
06:29:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.01<-20134  Statuses=0008 0009
06:29:10 Msec=750  True Az=112.995  Ze=-122.01  Az status=0008  Ze status=0009
06:29:10 Check angles
06:29:10 SkyScan query
06:29:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.65<-18710  Statuses=0008 0009
06:29:11 Msec=1500  True Az=112.995  Ze=-100.65  Az status=0008  Ze status=0009
06:29:11 Check angles
06:29:11 SkyScan query
06:29:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.695<-17313  Statuses=0008 0009
06:29:12 Msec=2250  True Az=112.995  Ze=-79.695  Az status=0008  Ze status=0009
06:29:12 Check angles
06:29:12 SkyScan query
06:29:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.74<-15916  Statuses=0008 0009
06:29:12 Msec=3000  True Az=112.995  Ze=-58.74  Az status=0008  Ze status=0009
06:29:12 Check angles
06:29:12 SkyScan query
06:29:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.77<-14518  Statuses=0008 0009
06:29:13 Msec=3750  True Az=112.995  Ze=-37.77  Az status=0008  Ze status=0009
06:29:13 Check angles
06:29:13 SkyScan query
06:29:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.815<-13121  Statuses=0008 0009
06:29:14 Msec=4500  True Az=112.995  Ze=-16.815  Az status=0008  Ze status=0009
06:29:14 Check angles
06:29:14 SkyScan query
06:29:15 SkyScan query done: ret=0  az=112.995<-7533  ze=4.47<-11702  Statuses=0008 0009
06:29:15 Msec=5250  True Az=112.995  Ze=4.47  Az status=0008  Ze status=0009
06:29:15 Check angles
06:29:15 SkyScan query
06:29:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:29:15 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:29:15 Message to Master queued w/err=0: serial=347173 error=0
06:29:20 Received message from Master: op=Filter serial=347174
06:29:20 Color wheel filter change from 0 to 0
06:29:20 FLIGetFilterPos err=0  currentPosition=0
06:29:20 FLIGetStepsRemaining err=0  RemainingSteps=0
06:29:20 Filter is already there-color wheel unchanged
06:29:21 Received message from Master: op=Shutter serial=347175
06:29:21 Shutter LASER close
06:29:21 Received message from Camera: op=State serial=347177
06:29:21 GetSingleValue result=40  Value=cccccccc
06:29:21 SkyScan query
06:29:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:29:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:29:21 Parameters OK
06:29:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:29:21 Set A/D data flow result=40
06:29:21 Set A/D channel type result=40
06:29:21 Set A/D encoding result=40
06:29:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:29:21 Set channel filter=0.000000e+000  result=40
06:29:21 Config A/D  Result=40
06:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:29:21 Get A/D filter: -9.255963e+061  result=40
06:29:21 Get A/D value=-858993460  result=40
06:29:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:29:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:29:21 Parameters OK
06:29:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:29:21 Set A/D data flow result=40
06:29:21 Set A/D channel type result=40
06:29:21 Set A/D encoding result=40
06:29:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:29:21 Set channel filter=0.000000e+000  result=40
06:29:21 Config A/D  Result=40
06:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:29:21 Get A/D filter: -9.255963e+061  result=40
06:29:21 Get A/D value=-858993460  result=40
06:29:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:29:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:29:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:29:21 Aux=
06:29:21 Message to Camera, serial 347177 queued
06:29:58 Received message from Master: op=PointingHead serial=347190
06:29:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:29:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:29:59 Point started: ret=0
06:29:59 point_skyscan result=0
06:29:59 Check angles
06:29:59 SkyScan query
06:30:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:30:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:30:00 Message to Master queued w/err=0: serial=347190 error=0
06:30:05 Received message from Master: op=Filter serial=347191
06:30:05 Color wheel filter change from 0 to 0
06:30:05 FLIGetFilterPos err=0  currentPosition=0
06:30:05 FLIGetStepsRemaining err=0  RemainingSteps=0
06:30:05 Filter is already there-color wheel unchanged
06:30:05 Received message from Master: op=Shutter serial=347192
06:30:05 Shutter LASER close
06:30:05 Received message from Camera: op=State serial=347194
06:30:05 GetSingleValue result=40  Value=cccccccc
06:30:05 SkyScan query
06:30:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:30:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:30:06 Parameters OK
06:30:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:30:06 Set A/D data flow result=40
06:30:06 Set A/D channel type result=40
06:30:06 Set A/D encoding result=40
06:30:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:30:06 Set channel filter=0.000000e+000  result=40
06:30:06 Config A/D  Result=40
06:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:30:06 Get A/D filter: -9.255963e+061  result=40
06:30:06 Get A/D value=-858993460  result=40
06:30:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:30:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:30:06 Parameters OK
06:30:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:30:06 Set A/D data flow result=40
06:30:06 Set A/D channel type result=40
06:30:06 Set A/D encoding result=40
06:30:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:30:06 Set channel filter=0.000000e+000  result=40
06:30:06 Config A/D  Result=40
06:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:30:06 Get A/D filter: -9.255963e+061  result=40
06:30:06 Get A/D value=-858993460  result=40
06:30:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:30:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:30:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:30:06 Aux=
06:30:06 Message to Camera, serial 347194 queued
06:30:42 Received message from Master: op=PointingHead serial=347207
06:30:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:30:42 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:30:43 Point started: ret=0
06:30:43 point_skyscan result=0
06:30:44 Check angles
06:30:44 SkyScan query
06:30:44 SkyScan query done: ret=0  az=136.365<-9091  ze=-6.51<-12434  Statuses=0009 0008
06:30:44 Msec=0  True Az=136.365  Ze=-6.51  Az status=0009  Ze status=0008
06:30:44 Check angles
06:30:44 SkyScan query
06:30:45 SkyScan query done: ret=0  az=153.78<-10252  ze=-6.495<-12433  Statuses=0009 0008
06:30:45 Msec=750  True Az=153.78  Ze=-6.495  Az status=0009  Ze status=0008
06:30:45 Check angles
06:30:45 SkyScan query
06:30:46 SkyScan query done: ret=0  az=171.27<-11418  ze=-6.495<-12433  Statuses=0009 0008
06:30:46 Msec=1500  True Az=171.27  Ze=-6.495  Az status=0009  Ze status=0008
06:30:46 Check angles
06:30:46 SkyScan query
06:30:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:30:46 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:30:46 Message to Master queued w/err=0: serial=347207 error=0
06:30:51 Received message from Master: op=Filter serial=347208
06:30:51 Color wheel filter change from 0 to 0
06:30:51 FLIGetFilterPos err=0  currentPosition=0
06:30:51 FLIGetStepsRemaining err=0  RemainingSteps=0
06:30:51 Filter is already there-color wheel unchanged
06:30:52 Received message from Master: op=Shutter serial=347209
06:30:52 Shutter LASER close
06:30:52 Received message from Camera: op=State serial=347211
06:30:52 GetSingleValue result=40  Value=cccccccc
06:30:52 SkyScan query
06:30:52 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:30:52 Parameters OK
06:30:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:30:52 Set A/D data flow result=40
06:30:52 Set A/D channel type result=40
06:30:52 Set A/D encoding result=40
06:30:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:30:52 Set channel filter=0.000000e+000  result=40
06:30:52 Config A/D  Result=40
06:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:30:52 Get A/D filter: -9.255963e+061  result=40
06:30:52 Get A/D value=-858993460  result=40
06:30:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:30:52 Parameters OK
06:30:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:30:52 Set A/D data flow result=40
06:30:52 Set A/D channel type result=40
06:30:52 Set A/D encoding result=40
06:30:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:30:52 Set channel filter=0.000000e+000  result=40
06:30:52 Config A/D  Result=40
06:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:30:52 Get A/D filter: -9.255963e+061  result=40
06:30:52 Get A/D value=-858993460  result=40
06:30:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:30:52 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:30:52 Aux=
06:30:52 Message to Camera, serial 347211 queued
06:31:29 Received message from Master: op=PointingHead serial=347224
06:31:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:31:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:31:29 Point started: ret=0
06:31:29 point_skyscan result=0
06:31:30 Check angles
06:31:30 SkyScan query
06:31:31 SkyScan query done: ret=0  az=153.045<-10203  ze=6.51<-11566  Statuses=0009 0008
06:31:31 Msec=0  True Az=153.045  Ze=6.51  Az status=0009  Ze status=0008
06:31:31 Check angles
06:31:31 SkyScan query
06:31:31 SkyScan query done: ret=0  az=135.495<-9033  ze=6.495<-11567  Statuses=0009 0008
06:31:31 Msec=750  True Az=135.495  Ze=6.495  Az status=0009  Ze status=0008
06:31:32 Check angles
06:31:32 SkyScan query
06:31:32 SkyScan query done: ret=0  az=118.065<-7871  ze=6.495<-11567  Statuses=0009 0008
06:31:32 Msec=1500  True Az=118.065  Ze=6.495  Az status=0009  Ze status=0008
06:31:32 Check angles
06:31:32 SkyScan query
06:31:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:31:33 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:31:33 Message to Master queued w/err=0: serial=347224 error=0
06:31:38 Received message from Master: op=Filter serial=347225
06:31:38 Color wheel filter change from 0 to 0
06:31:38 FLIGetFilterPos err=0  currentPosition=0
06:31:38 FLIGetStepsRemaining err=0  RemainingSteps=0
06:31:38 Filter is already there-color wheel unchanged
06:31:38 Received message from Master: op=Shutter serial=347226
06:31:38 Shutter LASER close
06:31:38 Received message from Camera: op=State serial=347228
06:31:38 GetSingleValue result=40  Value=cccccccc
06:31:38 SkyScan query
06:31:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:31:39 Parameters OK
06:31:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:31:39 Set A/D data flow result=40
06:31:39 Set A/D channel type result=40
06:31:39 Set A/D encoding result=40
06:31:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:31:39 Set channel filter=0.000000e+000  result=40
06:31:39 Config A/D  Result=40
06:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:31:39 Get A/D filter: -9.255963e+061  result=40
06:31:39 Get A/D value=-858993460  result=40
06:31:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:31:39 Parameters OK
06:31:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:31:39 Set A/D data flow result=40
06:31:39 Set A/D channel type result=40
06:31:39 Set A/D encoding result=40
06:31:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:31:39 Set channel filter=0.000000e+000  result=40
06:31:39 Config A/D  Result=40
06:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:31:39 Get A/D filter: -9.255963e+061  result=40
06:31:39 Get A/D value=-858993460  result=40
06:31:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:31:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:31:39 Aux=
06:31:39 Message to Camera, serial 347228 queued
06:32:16 Received message from Master: op=PointingHead serial=347241
06:32:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:32:16 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:32:16 Point started: ret=0
06:32:16 point_skyscan result=0
06:32:17 Check angles
06:32:17 SkyScan query
06:32:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
06:32:17 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
06:32:18 Check angles
06:32:18 SkyScan query
06:32:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.55<-14970  Statuses=0008 0009
06:32:18 Msec=750  True Az=112.995  Ze=-44.55  Az status=0008  Ze status=0009
06:32:18 Check angles
06:32:18 SkyScan query
06:32:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.91<-16394  Statuses=0008 0009
06:32:19 Msec=1500  True Az=112.995  Ze=-65.91  Az status=0008  Ze status=0009
06:32:19 Check angles
06:32:19 SkyScan query
06:32:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.865<-17791  Statuses=0008 0009
06:32:20 Msec=2250  True Az=112.995  Ze=-86.865  Az status=0008  Ze status=0009
06:32:20 Check angles
06:32:20 SkyScan query
06:32:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.835<-19189  Statuses=0008 0009
06:32:20 Msec=3000  True Az=112.995  Ze=-107.835  Az status=0008  Ze status=0009
06:32:21 Check angles
06:32:21 SkyScan query
06:32:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.775<-20585  Statuses=0008 0009
06:32:21 Msec=3750  True Az=112.995  Ze=-128.775  Az status=0008  Ze status=0009
06:32:21 Check angles
06:32:21 SkyScan query
06:32:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.73<-21982  Statuses=0008 0009
06:32:22 Msec=4500  True Az=112.995  Ze=-149.73  Az status=0008  Ze status=0009
06:32:22 Check angles
06:32:22 SkyScan query
06:32:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.64<-23376  Statuses=0008 0009
06:32:23 Msec=5250  True Az=112.995  Ze=-170.64  Az status=0008  Ze status=0009
06:32:23 Check angles
06:32:23 SkyScan query
06:32:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:32:23 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:32:23 Message to Master queued w/err=0: serial=347241 error=0
06:32:28 Received message from Master: op=Filter serial=347242
06:32:28 Color wheel filter change from 0 to 0
06:32:28 FLIGetFilterPos err=0  currentPosition=0
06:32:28 FLIGetStepsRemaining err=0  RemainingSteps=0
06:32:28 Filter is already there-color wheel unchanged
06:32:29 Received message from Master: op=Shutter serial=347243
06:32:29 Shutter LASER open
06:32:29 Received message from Camera: op=State serial=347245
06:32:29 GetSingleValue result=40  Value=cccccccc
06:32:29 SkyScan query
06:32:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:32:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:32:29 Parameters OK
06:32:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:32:29 Set A/D data flow result=40
06:32:29 Set A/D channel type result=40
06:32:29 Set A/D encoding result=40
06:32:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:32:29 Set channel filter=0.000000e+000  result=40
06:32:29 Config A/D  Result=40
06:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:32:29 Get A/D filter: -9.255963e+061  result=40
06:32:29 Get A/D value=-858993460  result=40
06:32:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:32:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:32:29 Parameters OK
06:32:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:32:29 Set A/D data flow result=40
06:32:29 Set A/D channel type result=40
06:32:29 Set A/D encoding result=40
06:32:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:32:29 Set channel filter=0.000000e+000  result=40
06:32:29 Config A/D  Result=40
06:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:32:29 Get A/D filter: -9.255963e+061  result=40
06:32:29 Get A/D value=-858993460  result=40
06:32:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:32:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:32:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:32:29 Aux=
06:32:29 Message to Camera, serial 347245 queued
06:32:38 Received message from Master: op=Shutter serial=347255
06:32:38 Shutter LASER close
06:32:38 Received message from Master: op=PointingHead serial=347259
06:32:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:32:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:32:38 Point started: ret=0
06:32:38 point_skyscan result=0
06:32:39 Check angles
06:32:39 SkyScan query
06:32:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.695<-21513  Statuses=0008 0009
06:32:40 Msec=0  True Az=112.995  Ze=-142.695  Az status=0008  Ze status=0009
06:32:40 Check angles
06:32:40 SkyScan query
06:32:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.32<-20088  Statuses=0008 0009
06:32:41 Msec=750  True Az=112.995  Ze=-121.32  Az status=0008  Ze status=0009
06:32:41 Check angles
06:32:41 SkyScan query
06:32:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-99.9<-18660  Statuses=0008 0009
06:32:41 Msec=1500  True Az=112.995  Ze=-99.9  Az status=0008  Ze status=0009
06:32:42 Check angles
06:32:42 SkyScan query
06:32:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-78.945<-17263  Statuses=0008 0009
06:32:42 Msec=2250  True Az=112.995  Ze=-78.945  Az status=0008  Ze status=0009
06:32:42 Check angles
06:32:42 SkyScan query
06:32:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.975<-15865  Statuses=0008 0009
06:32:43 Msec=3000  True Az=112.995  Ze=-57.975  Az status=0008  Ze status=0009
06:32:43 Check angles
06:32:43 SkyScan query
06:32:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.05<-14470  Statuses=0008 0009
06:32:44 Msec=3750  True Az=112.995  Ze=-37.05  Az status=0008  Ze status=0009
06:32:44 Check angles
06:32:44 SkyScan query
06:32:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.08<-13072  Statuses=0008 0009
06:32:44 Msec=4500  True Az=112.995  Ze=-16.08  Az status=0008  Ze status=0009
06:32:45 Check angles
06:32:45 SkyScan query
06:32:45 SkyScan query done: ret=0  az=112.995<-7533  ze=5.01<-11666  Statuses=0008 0009
06:32:45 Msec=5250  True Az=112.995  Ze=5.01  Az status=0008  Ze status=0009
06:32:45 Check angles
06:32:45 SkyScan query
06:32:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:32:46 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:32:46 Message to Master queued w/err=0: serial=347259 error=0
06:32:51 Received message from Master: op=Filter serial=347260
06:32:51 Color wheel filter change from 0 to 0
06:32:51 FLIGetFilterPos err=0  currentPosition=0
06:32:51 FLIGetStepsRemaining err=0  RemainingSteps=0
06:32:51 Filter is already there-color wheel unchanged
06:32:51 Received message from Master: op=Shutter serial=347261
06:32:51 Shutter LASER close
06:32:51 Received message from Camera: op=State serial=347263
06:32:51 GetSingleValue result=40  Value=cccccccc
06:32:51 SkyScan query
06:32:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:32:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:32:52 Parameters OK
06:32:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:32:52 Set A/D data flow result=40
06:32:52 Set A/D channel type result=40
06:32:52 Set A/D encoding result=40
06:32:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:32:52 Set channel filter=0.000000e+000  result=40
06:32:52 Config A/D  Result=40
06:32:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:32:52 Get A/D filter: -9.255963e+061  result=40
06:32:52 Get A/D value=-858993460  result=40
06:32:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:32:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:32:52 Parameters OK
06:32:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:32:52 Set A/D data flow result=40
06:32:52 Set A/D channel type result=40
06:32:52 Set A/D encoding result=40
06:32:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:32:52 Set channel filter=0.000000e+000  result=40
06:32:52 Config A/D  Result=40
06:32:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:32:52 Get A/D filter: -9.255963e+061  result=40
06:32:52 Get A/D value=-858993460  result=40
06:32:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:32:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:32:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:32:52 Aux=
06:32:52 Message to Camera, serial 347263 queued
06:33:29 Received message from Master: op=PointingHead serial=347276
06:33:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:33:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:33:29 Point started: ret=0
06:33:29 point_skyscan result=0
06:33:30 Check angles
06:33:30 SkyScan query
06:33:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:33:30 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:33:30 Message to Master queued w/err=0: serial=347276 error=0
06:33:35 Received message from Master: op=Filter serial=347277
06:33:35 Color wheel filter change from 0 to 0
06:33:35 FLIGetFilterPos err=0  currentPosition=0
06:33:35 FLIGetStepsRemaining err=0  RemainingSteps=0
06:33:35 Filter is already there-color wheel unchanged
06:33:35 Received message from Master: op=Identify serial=347278
06:33:35 Received message from Master: op=Shutter serial=347281
06:33:35 Shutter LASER close
06:33:36 Received message from Camera: op=State serial=347283
06:33:36 GetSingleValue result=40  Value=cccccccc
06:33:36 SkyScan query
06:33:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:33:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:33:36 Parameters OK
06:33:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:33:36 Set A/D data flow result=40
06:33:36 Set A/D channel type result=40
06:33:36 Set A/D encoding result=40
06:33:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:33:36 Set channel filter=0.000000e+000  result=40
06:33:36 Config A/D  Result=40
06:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:33:36 Get A/D filter: -9.255963e+061  result=40
06:33:36 Get A/D value=-858993460  result=40
06:33:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:33:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:33:36 Parameters OK
06:33:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:33:36 Set A/D data flow result=40
06:33:36 Set A/D channel type result=40
06:33:36 Set A/D encoding result=40
06:33:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:33:36 Set channel filter=0.000000e+000  result=40
06:33:36 Config A/D  Result=40
[UTC 2019-3-19  06:33:36]
06:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:33:36 Get A/D filter: -9.255963e+061  result=40
06:33:36 Get A/D value=-858993460  result=40
06:33:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:33:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:33:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:33:36 Aux=
06:33:36 Message to Camera, serial 347283 queued
06:34:13 Received message from Master: op=PointingHead serial=347296
06:34:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:34:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:34:13 Point started: ret=0
06:34:13 point_skyscan result=0
06:34:14 Check angles
06:34:14 SkyScan query
06:34:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:34:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:34:15 Message to Master queued w/err=0: serial=347296 error=0
06:34:20 Received message from Master: op=Filter serial=347297
06:34:20 Color wheel filter change from 0 to 0
06:34:20 FLIGetFilterPos err=0  currentPosition=0
06:34:20 FLIGetStepsRemaining err=0  RemainingSteps=0
06:34:20 Filter is already there-color wheel unchanged
06:34:20 Received message from Master: op=Shutter serial=347298
06:34:20 Shutter LASER close
06:34:20 Received message from Camera: op=State serial=347300
06:34:20 GetSingleValue result=40  Value=cccccccc
06:34:20 SkyScan query
06:34:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:34:20 Parameters OK
06:34:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:34:20 Set A/D data flow result=40
06:34:20 Set A/D channel type result=40
06:34:20 Set A/D encoding result=40
06:34:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:34:20 Set channel filter=0.000000e+000  result=40
06:34:20 Config A/D  Result=40
06:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:34:20 Get A/D filter: -9.255963e+061  result=40
06:34:20 Get A/D value=-858993460  result=40
06:34:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:34:20 Parameters OK
06:34:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:34:20 Set A/D data flow result=40
06:34:20 Set A/D channel type result=40
06:34:20 Set A/D encoding result=40
06:34:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:34:20 Set channel filter=0.000000e+000  result=40
06:34:20 Config A/D  Result=40
06:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:34:20 Get A/D filter: -9.255963e+061  result=40
06:34:20 Get A/D value=-858993460  result=40
06:34:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:34:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:34:20 Aux=
06:34:20 Message to Camera, serial 347300 queued
06:34:57 Received message from Master: op=PointingHead serial=347313
06:34:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:34:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:34:58 Point started: ret=0
06:34:58 point_skyscan result=0
06:34:58 Check angles
06:34:58 SkyScan query
06:34:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:34:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:34:59 Message to Master queued w/err=0: serial=347313 error=0
06:35:04 Received message from Master: op=Filter serial=347314
06:35:04 Color wheel filter change from 0 to 0
06:35:04 FLIGetFilterPos err=0  currentPosition=0
06:35:04 FLIGetStepsRemaining err=0  RemainingSteps=0
06:35:04 Filter is already there-color wheel unchanged
06:35:04 Received message from Master: op=Shutter serial=347315
06:35:04 Shutter LASER close
06:35:04 Received message from Camera: op=State serial=347317
06:35:04 GetSingleValue result=40  Value=cccccccc
06:35:04 SkyScan query
06:35:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:35:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:05 Parameters OK
06:35:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:05 Set A/D data flow result=40
06:35:05 Set A/D channel type result=40
06:35:05 Set A/D encoding result=40
06:35:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:05 Set channel filter=0.000000e+000  result=40
06:35:05 Config A/D  Result=40
06:35:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:05 Get A/D filter: -9.255963e+061  result=40
06:35:05 Get A/D value=-858993460  result=40
06:35:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:05 Parameters OK
06:35:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:05 Set A/D data flow result=40
06:35:05 Set A/D channel type result=40
06:35:05 Set A/D encoding result=40
06:35:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:05 Set channel filter=0.000000e+000  result=40
06:35:05 Config A/D  Result=40
06:35:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:05 Get A/D filter: -9.255963e+061  result=40
06:35:05 Get A/D value=-858993460  result=40
06:35:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:35:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:35:05 Aux=
06:35:05 Message to Camera, serial 347317 queued
06:35:42 Received message from Master: op=PointingHead serial=347330
06:35:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:35:42 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:35:42 Point started: ret=0
06:35:42 point_skyscan result=0
06:35:43 Check angles
06:35:43 SkyScan query
06:35:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.205<-13547  Statuses=0008 0009
06:35:43 Msec=0  True Az=112.995  Ze=-23.205  Az status=0008  Ze status=0009
06:35:43 Check angles
06:35:43 SkyScan query
06:35:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.145<-14943  Statuses=0008 0009
06:35:44 Msec=750  True Az=112.995  Ze=-44.145  Az status=0008  Ze status=0009
06:35:44 Check angles
06:35:44 SkyScan query
06:35:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.55<-16370  Statuses=0008 0009
06:35:45 Msec=1500  True Az=112.995  Ze=-65.55  Az status=0008  Ze status=0009
06:35:45 Check angles
06:35:45 SkyScan query
06:35:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.505<-17767  Statuses=0008 0009
06:35:46 Msec=2250  True Az=112.995  Ze=-86.505  Az status=0008  Ze status=0009
06:35:46 Check angles
06:35:46 SkyScan query
06:35:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.445<-19163  Statuses=0008 0009
06:35:46 Msec=3000  True Az=112.995  Ze=-107.445  Az status=0008  Ze status=0009
06:35:46 Check angles
06:35:46 SkyScan query
06:35:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.82<-20588  Statuses=0008 0009
06:35:47 Msec=3750  True Az=112.995  Ze=-128.82  Az status=0008  Ze status=0009
06:35:47 Check angles
06:35:47 SkyScan query
06:35:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.775<-21985  Statuses=0008 0009
06:35:48 Msec=4500  True Az=112.995  Ze=-149.775  Az status=0008  Ze status=0009
06:35:48 Check angles
06:35:48 SkyScan query
06:35:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.685<-23379  Statuses=0008 0009
06:35:49 Msec=5250  True Az=112.995  Ze=-170.685  Az status=0008  Ze status=0009
06:35:49 Check angles
06:35:49 SkyScan query
06:35:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:35:49 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:35:49 Message to Master queued w/err=0: serial=347330 error=0
06:35:54 Received message from Master: op=Filter serial=347331
06:35:54 Color wheel filter change from 0 to 0
06:35:54 FLIGetFilterPos err=0  currentPosition=0
06:35:54 FLIGetStepsRemaining err=0  RemainingSteps=0
06:35:54 Filter is already there-color wheel unchanged
06:35:54 Received message from Master: op=Shutter serial=347332
06:35:54 Shutter LASER open
06:35:55 Received message from Camera: op=State serial=347334
06:35:55 GetSingleValue result=40  Value=cccccccc
06:35:55 SkyScan query
06:35:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:35:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:55 Parameters OK
06:35:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:55 Set A/D data flow result=40
06:35:55 Set A/D channel type result=40
06:35:55 Set A/D encoding result=40
06:35:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:55 Set channel filter=0.000000e+000  result=40
06:35:55 Config A/D  Result=40
06:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:55 Get A/D filter: -9.255963e+061  result=40
06:35:55 Get A/D value=-858993460  result=40
06:35:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:55 Parameters OK
06:35:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:55 Set A/D data flow result=40
06:35:55 Set A/D channel type result=40
06:35:55 Set A/D encoding result=40
06:35:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:55 Set channel filter=0.000000e+000  result=40
06:35:55 Config A/D  Result=40
06:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:55 Get A/D filter: -9.255963e+061  result=40
06:35:55 Get A/D value=-858993460  result=40
06:35:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:35:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:35:55 Aux=
06:35:55 Message to Camera, serial 347334 queued
06:36:04 Received message from Master: op=Shutter serial=347344
06:36:04 Shutter LASER close
06:36:04 Received message from Master: op=PointingHead serial=347348
06:36:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:36:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:36:05 Point started: ret=0
06:36:05 point_skyscan result=0
06:36:05 Check angles
06:36:05 SkyScan query
06:36:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
06:36:06 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
06:36:06 Check angles
06:36:06 SkyScan query
06:36:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.52<-20168  Statuses=0008 0009
06:36:07 Msec=750  True Az=112.995  Ze=-122.52  Az status=0008  Ze status=0009
06:36:07 Check angles
06:36:07 SkyScan query
06:36:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.55<-18770  Statuses=0008 0009
06:36:07 Msec=1500  True Az=112.995  Ze=-101.55  Az status=0008  Ze status=0009
06:36:08 Check angles
06:36:08 SkyScan query
06:36:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.565<-17371  Statuses=0008 0009
06:36:08 Msec=2250  True Az=112.995  Ze=-80.565  Az status=0008  Ze status=0009
06:36:08 Check angles
06:36:08 SkyScan query
06:36:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.22<-15948  Statuses=0008 0009
06:36:09 Msec=3000  True Az=112.995  Ze=-59.22  Az status=0008  Ze status=0009
06:36:09 Check angles
06:36:09 SkyScan query
06:36:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.22<-14548  Statuses=0008 0009
06:36:10 Msec=3750  True Az=112.995  Ze=-38.22  Az status=0008  Ze status=0009
06:36:10 Check angles
06:36:10 SkyScan query
06:36:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.295<-13153  Statuses=0008 0009
06:36:10 Msec=4500  True Az=112.995  Ze=-17.295  Az status=0008  Ze status=0009
06:36:11 Check angles
06:36:11 SkyScan query
06:36:11 SkyScan query done: ret=0  az=112.995<-7533  ze=4.095<-11727  Statuses=0008 0009
06:36:11 Msec=5250  True Az=112.995  Ze=4.095  Az status=0008  Ze status=0009
06:36:11 Check angles
06:36:11 SkyScan query
06:36:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:36:12 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:36:12 Message to Master queued w/err=0: serial=347348 error=0
06:36:17 Received message from Master: op=Filter serial=347349
06:36:17 Color wheel filter change from 0 to 0
06:36:17 FLIGetFilterPos err=0  currentPosition=0
06:36:17 FLIGetStepsRemaining err=0  RemainingSteps=0
06:36:17 Filter is already there-color wheel unchanged
06:36:17 Received message from Master: op=Shutter serial=347350
06:36:17 Shutter LASER close
06:36:17 Received message from Camera: op=State serial=347352
06:36:17 GetSingleValue result=40  Value=cccccccc
06:36:17 SkyScan query
06:36:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:36:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:36:18 Parameters OK
06:36:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:36:18 Set A/D data flow result=40
06:36:18 Set A/D channel type result=40
06:36:18 Set A/D encoding result=40
06:36:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:36:18 Set channel filter=0.000000e+000  result=40
06:36:18 Config A/D  Result=40
06:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:36:18 Get A/D filter: -9.255963e+061  result=40
06:36:18 Get A/D value=-858993460  result=40
06:36:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:36:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:36:18 Parameters OK
06:36:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:36:18 Set A/D data flow result=40
06:36:18 Set A/D channel type result=40
06:36:18 Set A/D encoding result=40
06:36:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:36:18 Set channel filter=0.000000e+000  result=40
06:36:18 Config A/D  Result=40
06:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:36:18 Get A/D filter: -9.255963e+061  result=40
06:36:18 Get A/D value=-858993460  result=40
06:36:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:36:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:36:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:36:18 Aux=
06:36:18 Message to Camera, serial 347352 queued
06:36:55 Received message from Master: op=PointingHead serial=347365
06:36:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:36:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:36:55 Point started: ret=0
06:36:55 point_skyscan result=0
06:36:56 Check angles
06:36:56 SkyScan query
06:36:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:36:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:36:56 Message to Master queued w/err=0: serial=347365 error=0
06:37:01 Received message from Master: op=Filter serial=347366
06:37:01 Color wheel filter change from 0 to 0
06:37:01 FLIGetFilterPos err=0  currentPosition=0
06:37:01 FLIGetStepsRemaining err=0  RemainingSteps=0
06:37:01 Filter is already there-color wheel unchanged
06:37:02 Received message from Master: op=Shutter serial=347367
06:37:02 Shutter LASER close
06:37:02 Received message from Camera: op=State serial=347369
06:37:02 GetSingleValue result=40  Value=cccccccc
06:37:02 SkyScan query
06:37:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:37:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:37:02 Parameters OK
06:37:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:37:02 Set A/D data flow result=40
06:37:02 Set A/D channel type result=40
06:37:02 Set A/D encoding result=40
06:37:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:37:02 Set channel filter=0.000000e+000  result=40
06:37:02 Config A/D  Result=40
06:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:37:02 Get A/D filter: -9.255963e+061  result=40
06:37:02 Get A/D value=-858993460  result=40
06:37:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:37:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:37:02 Parameters OK
06:37:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:37:02 Set A/D data flow result=40
06:37:02 Set A/D channel type result=40
06:37:02 Set A/D encoding result=40
06:37:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:37:02 Set channel filter=0.000000e+000  result=40
06:37:02 Config A/D  Result=40
06:37:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:37:02 Get A/D filter: -9.255963e+061  result=40
06:37:02 Get A/D value=-858993460  result=40
06:37:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:37:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:37:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:37:02 Aux=
06:37:02 Message to Camera, serial 347369 queued
06:37:39 Received message from Master: op=PointingHead serial=347382
06:37:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:37:39 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:37:39 Point started: ret=0
06:37:39 point_skyscan result=0
06:37:40 Check angles
06:37:40 SkyScan query
06:37:41 SkyScan query done: ret=0  az=136.185<-9079  ze=-6.495<-12433  Statuses=0009 0008
06:37:41 Msec=0  True Az=136.185  Ze=-6.495  Az status=0009  Ze status=0008
06:37:41 Check angles
06:37:41 SkyScan query
06:37:41 SkyScan query done: ret=0  az=153.705<-10247  ze=-6.48<-12432  Statuses=0009 0008
06:37:41 Msec=750  True Az=153.705  Ze=-6.48  Az status=0009  Ze status=0008
06:37:42 Check angles
06:37:42 SkyScan query
06:37:42 SkyScan query done: ret=0  az=171.48<-11432  ze=-6.48<-12432  Statuses=0009 0008
06:37:42 Msec=1500  True Az=171.48  Ze=-6.48  Az status=0009  Ze status=0008
06:37:42 Check angles
06:37:42 SkyScan query
06:37:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
06:37:43 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
06:37:43 Message to Master queued w/err=0: serial=347382 error=0
06:37:48 Received message from Master: op=Filter serial=347383
06:37:48 Color wheel filter change from 0 to 0
06:37:48 FLIGetFilterPos err=0  currentPosition=0
06:37:48 FLIGetStepsRemaining err=0  RemainingSteps=0
06:37:48 Filter is already there-color wheel unchanged
06:37:48 Received message from Master: op=Shutter serial=347384
06:37:48 Shutter LASER close
06:37:48 Received message from Camera: op=State serial=347386
06:37:48 GetSingleValue result=40  Value=cccccccc
06:37:48 SkyScan query
06:37:49 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
06:37:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:37:49 Parameters OK
06:37:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:37:49 Set A/D data flow result=40
06:37:49 Set A/D channel type result=40
06:37:49 Set A/D encoding result=40
06:37:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:37:49 Set channel filter=0.000000e+000  result=40
06:37:49 Config A/D  Result=40
06:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:37:49 Get A/D filter: -9.255963e+061  result=40
06:37:49 Get A/D value=-858993460  result=40
06:37:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:37:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:37:49 Parameters OK
06:37:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:37:49 Set A/D data flow result=40
06:37:49 Set A/D channel type result=40
06:37:49 Set A/D encoding result=40
06:37:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:37:49 Set channel filter=0.000000e+000  result=40
06:37:49 Config A/D  Result=40
06:37:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:37:49 Get A/D filter: -9.255963e+061  result=40
06:37:49 Get A/D value=-858993460  result=40
06:37:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:37:49 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:37:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:37:49 Aux=
06:37:49 Message to Camera, serial 347386 queued
06:38:26 Received message from Master: op=PointingHead serial=347399
06:38:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:38:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:38:26 Point started: ret=0
06:38:26 point_skyscan result=0
06:38:27 Check angles
06:38:27 SkyScan query
06:38:27 SkyScan query done: ret=0  az=153.045<-10203  ze=6.51<-11566  Statuses=0009 0008
06:38:27 Msec=0  True Az=153.045  Ze=6.51  Az status=0009  Ze status=0008
06:38:28 Check angles
06:38:28 SkyScan query
06:38:28 SkyScan query done: ret=0  az=135.255<-9017  ze=6.495<-11567  Statuses=0009 0008
06:38:28 Msec=750  True Az=135.255  Ze=6.495  Az status=0009  Ze status=0008
06:38:28 Check angles
06:38:28 SkyScan query
06:38:29 SkyScan query done: ret=0  az=117.42<-7828  ze=6.495<-11567  Statuses=0009 0008
06:38:29 Msec=1500  True Az=117.42  Ze=6.495  Az status=0009  Ze status=0008
06:38:29 Check angles
06:38:29 SkyScan query
06:38:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:38:30 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:38:30 Message to Master queued w/err=0: serial=347399 error=0
06:38:35 Received message from Master: op=Filter serial=347400
06:38:35 Color wheel filter change from 0 to 0
06:38:35 FLIGetFilterPos err=0  currentPosition=0
06:38:35 FLIGetStepsRemaining err=0  RemainingSteps=0
06:38:35 Filter is already there-color wheel unchanged
06:38:35 Received message from Master: op=Shutter serial=347401
06:38:35 Shutter LASER close
06:38:35 Received message from Camera: op=State serial=347403
06:38:35 GetSingleValue result=40  Value=cccccccc
06:38:35 SkyScan query
06:38:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:38:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:38:35 Parameters OK
06:38:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:38:35 Set A/D data flow result=40
06:38:35 Set A/D channel type result=40
06:38:35 Set A/D encoding result=40
06:38:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:38:35 Set channel filter=0.000000e+000  result=40
06:38:35 Config A/D  Result=40
06:38:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:38:35 Get A/D filter: -9.255963e+061  result=40
06:38:35 Get A/D value=-858993460  result=40
06:38:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:38:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:38:35 Parameters OK
06:38:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:38:35 Set A/D data flow result=40
06:38:35 Set A/D channel type result=40
06:38:35 Set A/D encoding result=40
06:38:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:38:35 Set channel filter=0.000000e+000  result=40
06:38:35 Config A/D  Result=40
06:38:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:38:35 Get A/D filter: -9.255963e+061  result=40
06:38:35 Get A/D value=-858993460  result=40
06:38:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:38:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:38:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:38:35 Aux=
06:38:35 Message to Camera, serial 347403 queued
06:39:12 Received message from Master: op=PointingHead serial=347416
06:39:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:39:12 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:39:13 Point started: ret=0
06:39:13 point_skyscan result=0
06:39:13 Check angles
06:39:13 SkyScan query
06:39:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-22.98<-13532  Statuses=0008 0009
06:39:14 Msec=0  True Az=112.995  Ze=-22.98  Az status=0008  Ze status=0009
06:39:14 Check angles
06:39:14 SkyScan query
06:39:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.965<-14931  Statuses=0008 0009
06:39:15 Msec=750  True Az=112.995  Ze=-43.965  Az status=0008  Ze status=0009
06:39:15 Check angles
06:39:15 SkyScan query
06:39:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.355<-16357  Statuses=0008 0009
06:39:15 Msec=1500  True Az=112.995  Ze=-65.355  Az status=0008  Ze status=0009
06:39:16 Check angles
06:39:16 SkyScan query
06:39:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.31<-17754  Statuses=0008 0009
06:39:16 Msec=2250  True Az=112.995  Ze=-86.31  Az status=0008  Ze status=0009
06:39:16 Check angles
06:39:16 SkyScan query
06:39:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.25<-19150  Statuses=0008 0009
06:39:17 Msec=3000  True Az=112.995  Ze=-107.25  Az status=0008  Ze status=0009
06:39:17 Check angles
06:39:17 SkyScan query
06:39:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.205<-20547  Statuses=0008 0009
06:39:18 Msec=3750  True Az=112.995  Ze=-128.205  Az status=0008  Ze status=0009
06:39:18 Check angles
06:39:18 SkyScan query
06:39:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.175<-21945  Statuses=0008 0009
06:39:18 Msec=4500  True Az=112.995  Ze=-149.175  Az status=0008  Ze status=0009
06:39:19 Check angles
06:39:19 SkyScan query
06:39:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.115<-23341  Statuses=0008 0009
06:39:19 Msec=5250  True Az=112.995  Ze=-170.115  Az status=0008  Ze status=0009
06:39:19 Check angles
06:39:19 SkyScan query
06:39:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:39:20 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:39:20 Message to Master queued w/err=0: serial=347416 error=0
06:39:25 Received message from Master: op=Filter serial=347417
06:39:25 Color wheel filter change from 0 to 0
06:39:25 FLIGetFilterPos err=0  currentPosition=0
06:39:25 FLIGetStepsRemaining err=0  RemainingSteps=0
06:39:25 Filter is already there-color wheel unchanged
06:39:25 Received message from Master: op=Shutter serial=347418
06:39:25 Shutter LASER open
06:39:25 Received message from Camera: op=State serial=347420
06:39:25 GetSingleValue result=40  Value=cccccccc
06:39:25 SkyScan query
06:39:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:39:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:39:26 Parameters OK
06:39:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:39:26 Set A/D data flow result=40
06:39:26 Set A/D channel type result=40
06:39:26 Set A/D encoding result=40
06:39:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:39:26 Set channel filter=0.000000e+000  result=40
06:39:26 Config A/D  Result=40
06:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:39:26 Get A/D filter: -9.255963e+061  result=40
06:39:26 Get A/D value=-858993460  result=40
06:39:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:39:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:39:26 Parameters OK
06:39:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:39:26 Set A/D data flow result=40
06:39:26 Set A/D channel type result=40
06:39:26 Set A/D encoding result=40
06:39:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:39:26 Set channel filter=0.000000e+000  result=40
06:39:26 Config A/D  Result=40
06:39:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:39:26 Get A/D filter: -9.255963e+061  result=40
06:39:26 Get A/D value=-858993460  result=40
06:39:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:39:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:39:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:39:26 Aux=
06:39:26 Message to Camera, serial 347420 queued
06:39:34 Received message from Master: op=Shutter serial=347430
06:39:34 Shutter LASER close
06:39:35 Received message from Master: op=PointingHead serial=347434
06:39:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:39:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:39:35 Point started: ret=0
06:39:35 point_skyscan result=0
06:39:36 Check angles
06:39:36 SkyScan query
06:39:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
06:39:36 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
06:39:37 Check angles
06:39:37 SkyScan query
06:39:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.65<-20110  Statuses=0008 0009
06:39:37 Msec=750  True Az=112.995  Ze=-121.65  Az status=0008  Ze status=0009
06:39:37 Check angles
06:39:37 SkyScan query
06:39:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.71<-18714  Statuses=0008 0009
06:39:38 Msec=1500  True Az=112.995  Ze=-100.71  Az status=0008  Ze status=0009
06:39:38 Check angles
06:39:38 SkyScan query
06:39:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.755<-17317  Statuses=0008 0009
06:39:39 Msec=2250  True Az=112.995  Ze=-79.755  Az status=0008  Ze status=0009
06:39:39 Check angles
06:39:39 SkyScan query
06:39:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.335<-15889  Statuses=0008 0009
06:39:39 Msec=3000  True Az=112.995  Ze=-58.335  Az status=0008  Ze status=0009
06:39:40 Check angles
06:39:40 SkyScan query
06:39:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.41<-14494  Statuses=0008 0009
06:39:40 Msec=3750  True Az=112.995  Ze=-37.41  Az status=0008  Ze status=0009
06:39:40 Check angles
06:39:40 SkyScan query
06:39:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.425<-13095  Statuses=0008 0009
06:39:41 Msec=4500  True Az=112.995  Ze=-16.425  Az status=0008  Ze status=0009
06:39:41 Check angles
06:39:41 SkyScan query
06:39:42 SkyScan query done: ret=0  az=112.995<-7533  ze=4.755<-11683  Statuses=0008 0009
06:39:42 Msec=5250  True Az=112.995  Ze=4.755  Az status=0008  Ze status=0009
06:39:42 Check angles
06:39:42 SkyScan query
06:39:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:39:42 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:39:42 Message to Master queued w/err=0: serial=347434 error=0
06:39:47 Received message from Master: op=Filter serial=347435
06:39:47 Color wheel filter change from 0 to 0
06:39:47 FLIGetFilterPos err=0  currentPosition=0
06:39:47 FLIGetStepsRemaining err=0  RemainingSteps=0
06:39:47 Filter is already there-color wheel unchanged
06:39:48 Received message from Master: op=Shutter serial=347436
06:39:48 Shutter LASER close
06:39:48 Received message from Camera: op=State serial=347438
06:39:48 GetSingleValue result=40  Value=cccccccc
06:39:48 SkyScan query
06:39:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:39:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:39:48 Parameters OK
06:39:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:39:48 Set A/D data flow result=40
06:39:48 Set A/D channel type result=40
06:39:48 Set A/D encoding result=40
06:39:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:39:48 Set channel filter=0.000000e+000  result=40
06:39:48 Config A/D  Result=40
06:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:39:48 Get A/D filter: -9.255963e+061  result=40
06:39:48 Get A/D value=-858993460  result=40
06:39:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:39:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:39:48 Parameters OK
06:39:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:39:48 Set A/D data flow result=40
06:39:48 Set A/D channel type result=40
06:39:48 Set A/D encoding result=40
06:39:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:39:48 Set channel filter=0.000000e+000  result=40
06:39:48 Config A/D  Result=40
06:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:39:48 Get A/D filter: -9.255963e+061  result=40
06:39:48 Get A/D value=-858993460  result=40
06:39:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:39:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:39:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:39:48 Aux=
06:39:48 Message to Camera, serial 347438 queued
06:40:25 Received message from Master: op=PointingHead serial=347451
06:40:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:40:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:40:26 Point started: ret=0
06:40:26 point_skyscan result=0
06:40:26 Check angles
06:40:26 SkyScan query
06:40:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:40:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:40:27 Message to Master queued w/err=0: serial=347451 error=0
06:40:32 Received message from Master: op=Filter serial=347452
06:40:32 Color wheel filter change from 0 to 0
06:40:32 FLIGetFilterPos err=0  currentPosition=0
06:40:32 FLIGetStepsRemaining err=0  RemainingSteps=0
06:40:32 Filter is already there-color wheel unchanged
06:40:32 Received message from Master: op=Shutter serial=347453
06:40:32 Shutter LASER close
06:40:32 Received message from Camera: op=State serial=347455
06:40:32 GetSingleValue result=40  Value=cccccccc
06:40:32 SkyScan query
06:40:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:40:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:40:33 Parameters OK
06:40:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:40:33 Set A/D data flow result=40
06:40:33 Set A/D channel type result=40
06:40:33 Set A/D encoding result=40
06:40:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:40:33 Set channel filter=0.000000e+000  result=40
06:40:33 Config A/D  Result=40
06:40:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:40:33 Get A/D filter: -9.255963e+061  result=40
06:40:33 Get A/D value=-858993460  result=40
06:40:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:40:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:40:33 Parameters OK
06:40:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:40:33 Set A/D data flow result=40
06:40:33 Set A/D channel type result=40
06:40:33 Set A/D encoding result=40
06:40:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:40:33 Set channel filter=0.000000e+000  result=40
06:40:33 Config A/D  Result=40
06:40:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:40:33 Get A/D filter: -9.255963e+061  result=40
06:40:33 Get A/D value=-858993460  result=40
06:40:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:40:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:40:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:40:33 Aux=
06:40:33 Message to Camera, serial 347455 queued
06:41:10 Received message from Master: op=PointingHead serial=347468
06:41:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:41:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:41:10 Point started: ret=0
06:41:10 point_skyscan result=0
06:41:11 Check angles
06:41:11 SkyScan query
06:41:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:41:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:41:11 Message to Master queued w/err=0: serial=347468 error=0
06:41:16 Received message from Master: op=Filter serial=347469
06:41:16 Color wheel filter change from 0 to 0
06:41:16 FLIGetFilterPos err=0  currentPosition=0
06:41:16 FLIGetStepsRemaining err=0  RemainingSteps=0
06:41:16 Filter is already there-color wheel unchanged
06:41:16 Received message from Master: op=Shutter serial=347470
06:41:16 Shutter LASER close
06:41:16 Received message from Camera: op=State serial=347472
06:41:16 GetSingleValue result=40  Value=cccccccc
06:41:16 SkyScan query
06:41:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:41:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:41:17 Parameters OK
06:41:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:41:17 Set A/D data flow result=40
06:41:17 Set A/D channel type result=40
06:41:17 Set A/D encoding result=40
06:41:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:41:17 Set channel filter=0.000000e+000  result=40
06:41:17 Config A/D  Result=40
06:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:41:17 Get A/D filter: -9.255963e+061  result=40
06:41:17 Get A/D value=-858993460  result=40
06:41:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:41:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:41:17 Parameters OK
06:41:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:41:17 Set A/D data flow result=40
06:41:17 Set A/D channel type result=40
06:41:17 Set A/D encoding result=40
06:41:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:41:17 Set channel filter=0.000000e+000  result=40
06:41:17 Config A/D  Result=40
06:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:41:17 Get A/D filter: -9.255963e+061  result=40
06:41:17 Get A/D value=-858993460  result=40
06:41:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:41:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:41:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:41:17 Aux=
06:41:17 Message to Camera, serial 347472 queued
06:41:54 Received message from Master: op=PointingHead serial=347485
06:41:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:41:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:41:54 Point started: ret=0
06:41:54 point_skyscan result=0
06:41:55 Check angles
06:41:55 SkyScan query
06:41:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:41:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:41:56 Message to Master queued w/err=0: serial=347485 error=0
06:42:01 Received message from Master: op=Filter serial=347486
06:42:01 Color wheel filter change from 0 to 0
06:42:01 FLIGetFilterPos err=0  currentPosition=0
06:42:01 FLIGetStepsRemaining err=0  RemainingSteps=0
06:42:01 Filter is already there-color wheel unchanged
06:42:01 Received message from Master: op=Shutter serial=347487
06:42:01 Shutter LASER close
06:42:01 Received message from Camera: op=State serial=347489
06:42:01 GetSingleValue result=40  Value=cccccccc
06:42:01 SkyScan query
06:42:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:01 Parameters OK
06:42:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:01 Set A/D data flow result=40
06:42:01 Set A/D channel type result=40
06:42:01 Set A/D encoding result=40
06:42:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:01 Set channel filter=0.000000e+000  result=40
06:42:01 Config A/D  Result=40
06:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:01 Get A/D filter: -9.255963e+061  result=40
06:42:01 Get A/D value=-858993460  result=40
06:42:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:01 Parameters OK
06:42:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:01 Set A/D data flow result=40
06:42:01 Set A/D channel type result=40
06:42:01 Set A/D encoding result=40
06:42:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:01 Set channel filter=0.000000e+000  result=40
06:42:01 Config A/D  Result=40
06:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:01 Get A/D filter: -9.255963e+061  result=40
06:42:01 Get A/D value=-858993460  result=40
06:42:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:42:01 Aux=
06:42:01 Message to Camera, serial 347489 queued
06:42:38 Received message from Master: op=PointingHead serial=347502
06:42:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:42:38 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:42:39 Point started: ret=0
06:42:39 point_skyscan result=0
06:42:39 Check angles
06:42:39 SkyScan query
06:42:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.19<-13546  Statuses=0008 0009
06:42:40 Msec=0  True Az=112.995  Ze=-23.19  Az status=0008  Ze status=0009
06:42:40 Check angles
06:42:40 SkyScan query
06:42:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.145<-14943  Statuses=0008 0009
06:42:41 Msec=750  True Az=112.995  Ze=-44.145  Az status=0008  Ze status=0009
06:42:41 Check angles
06:42:41 SkyScan query
06:42:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.115<-16341  Statuses=0008 0009
06:42:41 Msec=1500  True Az=112.995  Ze=-65.115  Az status=0008  Ze status=0009
06:42:42 Check angles
06:42:42 SkyScan query
06:42:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.055<-17737  Statuses=0008 0009
06:42:42 Msec=2250  True Az=112.995  Ze=-86.055  Az status=0008  Ze status=0009
06:42:42 Check angles
06:42:42 SkyScan query
06:42:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.025<-19135  Statuses=0008 0009
06:42:43 Msec=3000  True Az=112.995  Ze=-107.025  Az status=0008  Ze status=0009
06:42:43 Check angles
06:42:43 SkyScan query
06:42:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.98<-20532  Statuses=0008 0009
06:42:44 Msec=3750  True Az=112.995  Ze=-127.98  Az status=0008  Ze status=0009
06:42:44 Check angles
06:42:44 SkyScan query
06:42:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.935<-21929  Statuses=0008 0009
06:42:44 Msec=4500  True Az=112.995  Ze=-148.935  Az status=0008  Ze status=0009
06:42:45 Check angles
06:42:45 SkyScan query
06:42:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.875<-23325  Statuses=0008 0009
06:42:45 Msec=5250  True Az=112.995  Ze=-169.875  Az status=0008  Ze status=0009
06:42:45 Check angles
06:42:45 SkyScan query
06:42:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:42:46 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:42:46 Message to Master queued w/err=0: serial=347502 error=0
06:42:51 Received message from Master: op=Filter serial=347503
06:42:51 Color wheel filter change from 0 to 0
06:42:51 FLIGetFilterPos err=0  currentPosition=0
06:42:51 FLIGetStepsRemaining err=0  RemainingSteps=0
06:42:51 Filter is already there-color wheel unchanged
06:42:51 Received message from Master: op=Shutter serial=347504
06:42:51 Shutter LASER open
06:42:51 Received message from Camera: op=State serial=347506
06:42:51 GetSingleValue result=40  Value=cccccccc
06:42:51 SkyScan query
06:42:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:42:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:52 Parameters OK
06:42:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:52 Set A/D data flow result=40
06:42:52 Set A/D channel type result=40
06:42:52 Set A/D encoding result=40
06:42:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:52 Set channel filter=0.000000e+000  result=40
06:42:52 Config A/D  Result=40
06:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:52 Get A/D filter: -9.255963e+061  result=40
06:42:52 Get A/D value=-858993460  result=40
06:42:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:52 Parameters OK
06:42:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:52 Set A/D data flow result=40
06:42:52 Set A/D channel type result=40
06:42:52 Set A/D encoding result=40
06:42:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:52 Set channel filter=0.000000e+000  result=40
06:42:52 Config A/D  Result=40
06:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:52 Get A/D filter: -9.255963e+061  result=40
06:42:52 Get A/D value=-858993460  result=40
06:42:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:42:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:42:52 Aux=
06:42:52 Message to Camera, serial 347506 queued
06:43:00 Received message from Master: op=Shutter serial=347516
06:43:00 Shutter LASER close
06:43:01 Received message from Master: op=PointingHead serial=347520
06:43:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:43:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:43:01 Point started: ret=0
06:43:01 point_skyscan result=0
06:43:02 Check angles
06:43:02 SkyScan query
06:43:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
06:43:02 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
06:43:03 Check angles
06:43:03 SkyScan query
06:43:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.1<-20140  Statuses=0008 0009
06:43:03 Msec=750  True Az=112.995  Ze=-122.1  Az status=0008  Ze status=0009
06:43:03 Check angles
06:43:03 SkyScan query
06:43:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.175<-18745  Statuses=0008 0009
06:43:04 Msec=1500  True Az=112.995  Ze=-101.175  Az status=0008  Ze status=0009
06:43:04 Check angles
06:43:04 SkyScan query
06:43:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
06:43:05 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
06:43:05 Check angles
06:43:05 SkyScan query
06:43:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.28<-15952  Statuses=0008 0009
06:43:05 Msec=3000  True Az=112.995  Ze=-59.28  Az status=0008  Ze status=0009
06:43:06 Check angles
06:43:06 SkyScan query
06:43:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.28<-14552  Statuses=0008 0009
06:43:06 Msec=3750  True Az=112.995  Ze=-38.28  Az status=0008  Ze status=0009
06:43:06 Check angles
06:43:06 SkyScan query
06:43:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.34<-13156  Statuses=0008 0009
06:43:07 Msec=4500  True Az=112.995  Ze=-17.34  Az status=0008  Ze status=0009
06:43:07 Check angles
06:43:07 SkyScan query
06:43:08 SkyScan query done: ret=0  az=112.995<-7533  ze=3.615<-11759  Statuses=0008 0009
06:43:08 Msec=5250  True Az=112.995  Ze=3.615  Az status=0008  Ze status=0009
06:43:08 Check angles
06:43:08 SkyScan query
06:43:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:43:08 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:43:08 Message to Master queued w/err=0: serial=347520 error=0
06:43:13 Received message from Master: op=Filter serial=347521
06:43:13 Color wheel filter change from 0 to 0
06:43:13 FLIGetFilterPos err=0  currentPosition=0
06:43:13 FLIGetStepsRemaining err=0  RemainingSteps=0
06:43:13 Filter is already there-color wheel unchanged
06:43:14 Received message from Master: op=Shutter serial=347522
06:43:14 Shutter LASER close
06:43:14 Received message from Camera: op=State serial=347524
06:43:14 GetSingleValue result=40  Value=cccccccc
06:43:14 SkyScan query
06:43:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:43:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:43:14 Parameters OK
06:43:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:43:14 Set A/D data flow result=40
06:43:14 Set A/D channel type result=40
06:43:14 Set A/D encoding result=40
06:43:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:43:14 Set channel filter=0.000000e+000  result=40
06:43:14 Config A/D  Result=40
06:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:43:14 Get A/D filter: -9.255963e+061  result=40
06:43:14 Get A/D value=-858993460  result=40
06:43:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:43:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:43:14 Parameters OK
06:43:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:43:14 Set A/D data flow result=40
06:43:14 Set A/D channel type result=40
06:43:14 Set A/D encoding result=40
06:43:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:43:14 Set channel filter=0.000000e+000  result=40
06:43:14 Config A/D  Result=40
06:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:43:14 Get A/D filter: -9.255963e+061  result=40
06:43:14 Get A/D value=-858993460  result=40
06:43:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:43:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:43:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:43:14 Aux=
06:43:14 Message to Camera, serial 347524 queued
[UTC 2019-3-19  06:43:48]
06:43:51 Received message from Master: op=PointingHead serial=347537
06:43:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:43:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:43:52 Point started: ret=0
06:43:52 point_skyscan result=0
06:43:52 Check angles
06:43:52 SkyScan query
06:43:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
06:43:53 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
06:43:53 Message to Master queued w/err=0: serial=347537 error=0
06:43:58 Received message from Master: op=Filter serial=347538
06:43:58 Color wheel filter change from 0 to 0
06:43:58 FLIGetFilterPos err=0  currentPosition=0
06:43:58 FLIGetStepsRemaining err=0  RemainingSteps=0
06:43:58 Filter is already there-color wheel unchanged
06:43:58 Received message from Master: op=Shutter serial=347539
06:43:58 Shutter LASER close
06:43:58 Received message from Camera: op=State serial=347541
06:43:58 GetSingleValue result=40  Value=cccccccc
06:43:58 SkyScan query
06:43:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:43:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:43:59 Parameters OK
06:43:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:43:59 Set A/D data flow result=40
06:43:59 Set A/D channel type result=40
06:43:59 Set A/D encoding result=40
06:43:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:43:59 Set channel filter=0.000000e+000  result=40
06:43:59 Config A/D  Result=40
06:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:43:59 Get A/D filter: -9.255963e+061  result=40
06:43:59 Get A/D value=-858993460  result=40
06:43:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:43:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:43:59 Parameters OK
06:43:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:43:59 Set A/D data flow result=40
06:43:59 Set A/D channel type result=40
06:43:59 Set A/D encoding result=40
06:43:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:43:59 Set channel filter=0.000000e+000  result=40
06:43:59 Config A/D  Result=40
06:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:43:59 Get A/D filter: -9.255963e+061  result=40
06:43:59 Get A/D value=-858993460  result=40
06:43:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:43:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:43:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:43:59 Aux=
06:43:59 Message to Camera, serial 347541 queued
06:44:36 Received message from Master: op=PointingHead serial=347554
06:44:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:44:36 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:44:36 Point started: ret=0
06:44:36 point_skyscan result=0
06:44:37 Check angles
06:44:37 SkyScan query
06:44:37 SkyScan query done: ret=0  az=136.17<-9078  ze=-6.51<-12434  Statuses=0009 0008
06:44:37 Msec=0  True Az=136.17  Ze=-6.51  Az status=0009  Ze status=0008
06:44:38 Check angles
06:44:38 SkyScan query
06:44:38 SkyScan query done: ret=0  az=153.96<-10264  ze=-6.495<-12433  Statuses=0009 0008
06:44:38 Msec=750  True Az=153.96  Ze=-6.495  Az status=0009  Ze status=0008
06:44:38 Check angles
06:44:38 SkyScan query
06:44:39 SkyScan query done: ret=0  az=171.855<-11457  ze=-6.495<-12433  Statuses=0009 0008
06:44:39 Msec=1500  True Az=171.855  Ze=-6.495  Az status=0009  Ze status=0008
06:44:39 Check angles
06:44:39 SkyScan query
06:44:40 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:44:40 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:44:40 Message to Master queued w/err=0: serial=347554 error=0
06:44:45 Received message from Master: op=Filter serial=347555
06:44:45 Color wheel filter change from 0 to 0
06:44:45 FLIGetFilterPos err=0  currentPosition=0
06:44:45 FLIGetStepsRemaining err=0  RemainingSteps=0
06:44:45 Filter is already there-color wheel unchanged
06:44:45 Received message from Master: op=Shutter serial=347556
06:44:45 Shutter LASER close
06:44:45 Received message from Camera: op=State serial=347558
06:44:45 GetSingleValue result=40  Value=cccccccc
06:44:45 SkyScan query
06:44:45 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:44:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:44:45 Parameters OK
06:44:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:44:45 Set A/D data flow result=40
06:44:45 Set A/D channel type result=40
06:44:45 Set A/D encoding result=40
06:44:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:44:45 Set channel filter=0.000000e+000  result=40
06:44:45 Config A/D  Result=40
06:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:44:45 Get A/D filter: -9.255963e+061  result=40
06:44:45 Get A/D value=-858993460  result=40
06:44:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:44:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:44:45 Parameters OK
06:44:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:44:45 Set A/D data flow result=40
06:44:45 Set A/D channel type result=40
06:44:45 Set A/D encoding result=40
06:44:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:44:45 Set channel filter=0.000000e+000  result=40
06:44:45 Config A/D  Result=40
06:44:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:44:45 Get A/D filter: -9.255963e+061  result=40
06:44:45 Get A/D value=-858993460  result=40
06:44:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:44:45 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:44:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:44:45 Aux=
06:44:45 Message to Camera, serial 347558 queued
06:45:21 Received message from Master: op=PointingHead serial=347570
06:45:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:45:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:45:22 Point started: ret=0
06:45:22 point_skyscan result=0
06:45:22 Check angles
06:45:22 SkyScan query
06:45:23 SkyScan query done: ret=0  az=152.655<-10177  ze=6.51<-11566  Statuses=0009 0008
06:45:23 Msec=0  True Az=152.655  Ze=6.51  Az status=0009  Ze status=0008
06:45:23 Check angles
06:45:23 SkyScan query
06:45:24 SkyScan query done: ret=0  az=135.24<-9016  ze=6.495<-11567  Statuses=0009 0008
06:45:24 Msec=750  True Az=135.24  Ze=6.495  Az status=0009  Ze status=0008
06:45:24 Check angles
06:45:24 SkyScan query
06:45:24 SkyScan query done: ret=0  az=117.36<-7824  ze=6.495<-11567  Statuses=0009 0008
06:45:24 Msec=1500  True Az=117.36  Ze=6.495  Az status=0009  Ze status=0008
06:45:25 Check angles
06:45:25 SkyScan query
06:45:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:45:25 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:45:25 Message to Master queued w/err=0: serial=347570 error=0
06:45:30 Received message from Master: op=Filter serial=347571
06:45:30 Color wheel filter change from 0 to 0
06:45:30 FLIGetFilterPos err=0  currentPosition=0
06:45:30 FLIGetStepsRemaining err=0  RemainingSteps=0
06:45:30 Filter is already there-color wheel unchanged
06:45:30 Received message from Master: op=Shutter serial=347572
06:45:30 Shutter LASER close
06:45:30 Received message from Camera: op=State serial=347574
06:45:30 GetSingleValue result=40  Value=cccccccc
06:45:30 SkyScan query
06:45:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:45:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:45:31 Parameters OK
06:45:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:45:31 Set A/D data flow result=40
06:45:31 Set A/D channel type result=40
06:45:31 Set A/D encoding result=40
06:45:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:45:31 Set channel filter=0.000000e+000  result=40
06:45:31 Config A/D  Result=40
06:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:45:31 Get A/D filter: -9.255963e+061  result=40
06:45:31 Get A/D value=-858993460  result=40
06:45:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:45:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:45:31 Parameters OK
06:45:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:45:31 Set A/D data flow result=40
06:45:31 Set A/D channel type result=40
06:45:31 Set A/D encoding result=40
06:45:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:45:31 Set channel filter=0.000000e+000  result=40
06:45:31 Config A/D  Result=40
06:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:45:31 Get A/D filter: -9.255963e+061  result=40
06:45:31 Get A/D value=-858993460  result=40
06:45:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:45:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:45:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:45:31 Aux=
06:45:31 Message to Camera, serial 347574 queued
06:46:08 Received message from Master: op=PointingHead serial=347587
06:46:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:46:08 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:46:08 Point started: ret=0
06:46:08 point_skyscan result=0
06:46:09 Check angles
06:46:09 SkyScan query
06:46:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.85<-13590  Statuses=0008 0009
06:46:10 Msec=0  True Az=112.995  Ze=-23.85  Az status=0008  Ze status=0009
06:46:10 Check angles
06:46:10 SkyScan query
06:46:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.88<-14992  Statuses=0008 0009
06:46:10 Msec=750  True Az=112.995  Ze=-44.88  Az status=0008  Ze status=0009
06:46:10 Check angles
06:46:10 SkyScan query
06:46:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.195<-16413  Statuses=0008 0009
06:46:11 Msec=1500  True Az=112.995  Ze=-66.195  Az status=0008  Ze status=0009
06:46:11 Check angles
06:46:11 SkyScan query
06:46:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.585<-17839  Statuses=0008 0009
06:46:12 Msec=2250  True Az=112.995  Ze=-87.585  Az status=0008  Ze status=0009
06:46:12 Check angles
06:46:12 SkyScan query
06:46:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.975<-19265  Statuses=0008 0009
06:46:13 Msec=3000  True Az=112.995  Ze=-108.975  Az status=0008  Ze status=0009
06:46:13 Check angles
06:46:13 SkyScan query
06:46:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.93<-20662  Statuses=0008 0009
06:46:13 Msec=3750  True Az=112.995  Ze=-129.93  Az status=0008  Ze status=0009
06:46:14 Check angles
06:46:14 SkyScan query
06:46:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.305<-22087  Statuses=0008 0009
06:46:14 Msec=4500  True Az=112.995  Ze=-151.305  Az status=0008  Ze status=0009
06:46:14 Check angles
06:46:14 SkyScan query
06:46:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.05<-23470  Statuses=0008 0009
06:46:15 Msec=5250  True Az=112.995  Ze=-172.05  Az status=0008  Ze status=0009
06:46:15 Check angles
06:46:15 SkyScan query
06:46:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:46:16 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:46:16 Message to Master queued w/err=0: serial=347587 error=0
06:46:21 Received message from Master: op=Filter serial=347588
06:46:21 Color wheel filter change from 0 to 0
06:46:21 FLIGetFilterPos err=0  currentPosition=0
06:46:21 FLIGetStepsRemaining err=0  RemainingSteps=0
06:46:21 Filter is already there-color wheel unchanged
06:46:21 Received message from Master: op=Shutter serial=347589
06:46:21 Shutter LASER open
06:46:21 Received message from Camera: op=State serial=347591
06:46:21 GetSingleValue result=40  Value=cccccccc
06:46:21 SkyScan query
06:46:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:46:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:22 Parameters OK
06:46:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:22 Set A/D data flow result=40
06:46:22 Set A/D channel type result=40
06:46:22 Set A/D encoding result=40
06:46:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:22 Set channel filter=0.000000e+000  result=40
06:46:22 Config A/D  Result=40
06:46:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:22 Get A/D filter: -9.255963e+061  result=40
06:46:22 Get A/D value=-858993460  result=40
06:46:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:22 Parameters OK
06:46:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:22 Set A/D data flow result=40
06:46:22 Set A/D channel type result=40
06:46:22 Set A/D encoding result=40
06:46:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:22 Set channel filter=0.000000e+000  result=40
06:46:22 Config A/D  Result=40
06:46:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:22 Get A/D filter: -9.255963e+061  result=40
06:46:22 Get A/D value=-858993460  result=40
06:46:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:46:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:46:22 Aux=
06:46:22 Message to Camera, serial 347591 queued
06:46:30 Received message from Master: op=Shutter serial=347601
06:46:30 Shutter LASER close
06:46:30 Received message from Master: op=PointingHead serial=347605
06:46:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:46:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:46:31 Point started: ret=0
06:46:31 point_skyscan result=0
06:46:32 Check angles
06:46:32 SkyScan query
06:46:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.74<-21516  Statuses=0008 0009
06:46:32 Msec=0  True Az=112.995  Ze=-142.74  Az status=0008  Ze status=0009
06:46:32 Check angles
06:46:32 SkyScan query
06:46:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.77<-20118  Statuses=0008 0009
06:46:33 Msec=750  True Az=112.995  Ze=-121.77  Az status=0008  Ze status=0009
06:46:33 Check angles
06:46:33 SkyScan query
06:46:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
06:46:34 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
06:46:34 Check angles
06:46:34 SkyScan query
06:46:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.905<-17327  Statuses=0008 0009
06:46:34 Msec=2250  True Az=112.995  Ze=-79.905  Az status=0008  Ze status=0009
06:46:35 Check angles
06:46:35 SkyScan query
06:46:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.95<-15930  Statuses=0008 0009
06:46:35 Msec=3000  True Az=112.995  Ze=-58.95  Az status=0008  Ze status=0009
06:46:35 Check angles
06:46:35 SkyScan query
06:46:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.95<-14530  Statuses=0008 0009
06:46:36 Msec=3750  True Az=112.995  Ze=-37.95  Az status=0008  Ze status=0009
06:46:36 Check angles
06:46:36 SkyScan query
06:46:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.01<-13134  Statuses=0008 0009
06:46:37 Msec=4500  True Az=112.995  Ze=-17.01  Az status=0008  Ze status=0009
06:46:37 Check angles
06:46:37 SkyScan query
06:46:37 SkyScan query done: ret=0  az=112.995<-7533  ze=3.945<-11737  Statuses=0008 0009
06:46:37 Msec=5250  True Az=112.995  Ze=3.945  Az status=0008  Ze status=0009
06:46:38 Check angles
06:46:38 SkyScan query
06:46:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:46:38 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:46:38 Message to Master queued w/err=0: serial=347605 error=0
06:46:43 Received message from Master: op=Filter serial=347606
06:46:43 Color wheel filter change from 0 to 0
06:46:43 FLIGetFilterPos err=0  currentPosition=0
06:46:43 FLIGetStepsRemaining err=0  RemainingSteps=0
06:46:43 Filter is already there-color wheel unchanged
06:46:43 Received message from Master: op=Shutter serial=347607
06:46:43 Shutter LASER close
06:46:43 Received message from Camera: op=State serial=347609
06:46:43 GetSingleValue result=40  Value=cccccccc
06:46:43 SkyScan query
06:46:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:46:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:44 Parameters OK
06:46:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:44 Set A/D data flow result=40
06:46:44 Set A/D channel type result=40
06:46:44 Set A/D encoding result=40
06:46:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:44 Set channel filter=0.000000e+000  result=40
06:46:44 Config A/D  Result=40
06:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:44 Get A/D filter: -9.255963e+061  result=40
06:46:44 Get A/D value=-858993460  result=40
06:46:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:44 Parameters OK
06:46:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:44 Set A/D data flow result=40
06:46:44 Set A/D channel type result=40
06:46:44 Set A/D encoding result=40
06:46:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:44 Set channel filter=0.000000e+000  result=40
06:46:44 Config A/D  Result=40
06:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:44 Get A/D filter: -9.255963e+061  result=40
06:46:44 Get A/D value=-858993460  result=40
06:46:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:46:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:46:44 Aux=
06:46:44 Message to Camera, serial 347609 queued
06:47:21 Received message from Master: op=PointingHead serial=347622
06:47:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:47:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:47:21 Point started: ret=0
06:47:21 point_skyscan result=0
06:47:22 Check angles
06:47:22 SkyScan query
06:47:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:47:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:47:23 Message to Master queued w/err=0: serial=347622 error=0
06:47:28 Received message from Master: op=Filter serial=347623
06:47:28 Color wheel filter change from 0 to 0
06:47:28 FLIGetFilterPos err=0  currentPosition=0
06:47:28 FLIGetStepsRemaining err=0  RemainingSteps=0
06:47:28 Filter is already there-color wheel unchanged
06:47:28 Received message from Master: op=Shutter serial=347624
06:47:28 Shutter LASER close
06:47:28 Received message from Camera: op=State serial=347626
06:47:28 GetSingleValue result=40  Value=cccccccc
06:47:28 SkyScan query
06:47:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:47:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:47:28 Parameters OK
06:47:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:47:28 Set A/D data flow result=40
06:47:28 Set A/D channel type result=40
06:47:28 Set A/D encoding result=40
06:47:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:47:28 Set channel filter=0.000000e+000  result=40
06:47:28 Config A/D  Result=40
06:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:47:28 Get A/D filter: -9.255963e+061  result=40
06:47:28 Get A/D value=-858993460  result=40
06:47:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:47:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:47:28 Parameters OK
06:47:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:47:28 Set A/D data flow result=40
06:47:28 Set A/D channel type result=40
06:47:28 Set A/D encoding result=40
06:47:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:47:28 Set channel filter=0.000000e+000  result=40
06:47:28 Config A/D  Result=40
06:47:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:47:28 Get A/D filter: -9.255963e+061  result=40
06:47:28 Get A/D value=-858993460  result=40
06:47:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:47:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:47:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:47:28 Aux=
06:47:28 Message to Camera, serial 347626 queued
06:48:05 Received message from Master: op=PointingHead serial=347639
06:48:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:48:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:48:06 Point started: ret=0
06:48:06 point_skyscan result=0
06:48:06 Check angles
06:48:06 SkyScan query
06:48:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:48:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:48:07 Message to Master queued w/err=0: serial=347639 error=0
06:48:12 Received message from Master: op=Filter serial=347640
06:48:12 Color wheel filter change from 0 to 0
06:48:12 FLIGetFilterPos err=0  currentPosition=0
06:48:12 FLIGetStepsRemaining err=0  RemainingSteps=0
06:48:12 Filter is already there-color wheel unchanged
06:48:12 Received message from Master: op=Shutter serial=347641
06:48:12 Shutter LASER close
06:48:12 Received message from Camera: op=State serial=347643
06:48:12 GetSingleValue result=40  Value=cccccccc
06:48:12 SkyScan query
06:48:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:48:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:48:13 Parameters OK
06:48:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:48:13 Set A/D data flow result=40
06:48:13 Set A/D channel type result=40
06:48:13 Set A/D encoding result=40
06:48:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:48:13 Set channel filter=0.000000e+000  result=40
06:48:13 Config A/D  Result=40
06:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:48:13 Get A/D filter: -9.255963e+061  result=40
06:48:13 Get A/D value=-858993460  result=40
06:48:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:48:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:48:13 Parameters OK
06:48:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:48:13 Set A/D data flow result=40
06:48:13 Set A/D channel type result=40
06:48:13 Set A/D encoding result=40
06:48:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:48:13 Set channel filter=0.000000e+000  result=40
06:48:13 Config A/D  Result=40
06:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:48:13 Get A/D filter: -9.255963e+061  result=40
06:48:13 Get A/D value=-858993460  result=40
06:48:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:48:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:48:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:48:13 Aux=
06:48:13 Message to Camera, serial 347643 queued
06:48:50 Received message from Master: op=PointingHead serial=347656
06:48:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:48:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:48:50 Point started: ret=0
06:48:50 point_skyscan result=0
06:48:51 Check angles
06:48:51 SkyScan query
06:48:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:48:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:48:51 Message to Master queued w/err=0: serial=347656 error=0
06:48:56 Received message from Master: op=Filter serial=347657
06:48:56 Color wheel filter change from 0 to 0
06:48:56 FLIGetFilterPos err=0  currentPosition=0
06:48:56 FLIGetStepsRemaining err=0  RemainingSteps=0
06:48:56 Filter is already there-color wheel unchanged
06:48:56 Received message from Master: op=Shutter serial=347658
06:48:56 Shutter LASER close
06:48:57 Received message from Camera: op=State serial=347660
06:48:57 GetSingleValue result=40  Value=cccccccc
06:48:57 SkyScan query
06:48:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:48:57 Parameters OK
06:48:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:48:57 Set A/D data flow result=40
06:48:57 Set A/D channel type result=40
06:48:57 Set A/D encoding result=40
06:48:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:48:57 Set channel filter=0.000000e+000  result=40
06:48:57 Config A/D  Result=40
06:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:48:57 Get A/D filter: -9.255963e+061  result=40
06:48:57 Get A/D value=-858993460  result=40
06:48:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:48:57 Parameters OK
06:48:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:48:57 Set A/D data flow result=40
06:48:57 Set A/D channel type result=40
06:48:57 Set A/D encoding result=40
06:48:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:48:57 Set channel filter=0.000000e+000  result=40
06:48:57 Config A/D  Result=40
06:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:48:57 Get A/D filter: -9.255963e+061  result=40
06:48:57 Get A/D value=-858993460  result=40
06:48:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:48:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:48:57 Aux=
06:48:57 Message to Camera, serial 347660 queued
06:49:34 Received message from Master: op=PointingHead serial=347673
06:49:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:49:34 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:49:34 Point started: ret=0
06:49:34 point_skyscan result=0
06:49:35 Check angles
06:49:35 SkyScan query
06:49:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.175<-13545  Statuses=0008 0009
06:49:36 Msec=0  True Az=112.995  Ze=-23.175  Az status=0008  Ze status=0009
06:49:36 Check angles
06:49:36 SkyScan query
06:49:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
06:49:36 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
06:49:37 Check angles
06:49:37 SkyScan query
06:49:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.55<-16370  Statuses=0008 0009
06:49:37 Msec=1500  True Az=112.995  Ze=-65.55  Az status=0008  Ze status=0009
06:49:37 Check angles
06:49:37 SkyScan query
06:49:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.505<-17767  Statuses=0008 0009
06:49:38 Msec=2250  True Az=112.995  Ze=-86.505  Az status=0008  Ze status=0009
06:49:38 Check angles
06:49:38 SkyScan query
06:49:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.445<-19163  Statuses=0008 0009
06:49:39 Msec=3000  True Az=112.995  Ze=-107.445  Az status=0008  Ze status=0009
06:49:39 Check angles
06:49:39 SkyScan query
06:49:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.82<-20588  Statuses=0008 0009
06:49:39 Msec=3750  True Az=112.995  Ze=-128.82  Az status=0008  Ze status=0009
06:49:40 Check angles
06:49:40 SkyScan query
06:49:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.775<-21985  Statuses=0008 0009
06:49:40 Msec=4500  True Az=112.995  Ze=-149.775  Az status=0008  Ze status=0009
06:49:40 Check angles
06:49:40 SkyScan query
06:49:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.685<-23379  Statuses=0008 0009
06:49:41 Msec=5250  True Az=112.995  Ze=-170.685  Az status=0008  Ze status=0009
06:49:41 Check angles
06:49:41 SkyScan query
06:49:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:49:42 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:49:42 Message to Master queued w/err=0: serial=347673 error=0
06:49:47 Received message from Master: op=Filter serial=347674
06:49:47 Color wheel filter change from 0 to 0
06:49:47 FLIGetFilterPos err=0  currentPosition=0
06:49:47 FLIGetStepsRemaining err=0  RemainingSteps=0
06:49:47 Filter is already there-color wheel unchanged
06:49:47 Received message from Master: op=Shutter serial=347675
06:49:47 Shutter LASER open
06:49:47 Received message from Camera: op=State serial=347677
06:49:47 GetSingleValue result=40  Value=cccccccc
06:49:47 SkyScan query
06:49:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:49:48 Parameters OK
06:49:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:49:48 Set A/D data flow result=40
06:49:48 Set A/D channel type result=40
06:49:48 Set A/D encoding result=40
06:49:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:49:48 Set channel filter=0.000000e+000  result=40
06:49:48 Config A/D  Result=40
06:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:49:48 Get A/D filter: -9.255963e+061  result=40
06:49:48 Get A/D value=-858993460  result=40
06:49:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:49:48 Parameters OK
06:49:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:49:48 Set A/D data flow result=40
06:49:48 Set A/D channel type result=40
06:49:48 Set A/D encoding result=40
06:49:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:49:48 Set channel filter=0.000000e+000  result=40
06:49:48 Config A/D  Result=40
06:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:49:48 Get A/D filter: -9.255963e+061  result=40
06:49:48 Get A/D value=-858993460  result=40
06:49:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:49:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:49:48 Aux=
06:49:48 Message to Camera, serial 347677 queued
06:49:56 Received message from Master: op=Shutter serial=347687
06:49:56 Shutter LASER close
06:49:57 Received message from Master: op=PointingHead serial=347691
06:49:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:49:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:49:57 Point started: ret=0
06:49:57 point_skyscan result=0
06:49:58 Check angles
06:49:58 SkyScan query
06:49:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
06:49:58 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
06:49:58 Check angles
06:49:58 SkyScan query
06:49:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.16<-20144  Statuses=0008 0009
06:49:59 Msec=750  True Az=112.995  Ze=-122.16  Az status=0008  Ze status=0009
06:49:59 Check angles
06:49:59 SkyScan query
06:50:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.22<-18748  Statuses=0008 0009
06:50:00 Msec=1500  True Az=112.995  Ze=-101.22  Az status=0008  Ze status=0009
06:50:00 Check angles
06:50:00 SkyScan query
06:50:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.25<-17350  Statuses=0008 0009
06:50:00 Msec=2250  True Az=112.995  Ze=-80.25  Az status=0008  Ze status=0009
06:50:01 Check angles
06:50:01 SkyScan query
06:50:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.325<-15955  Statuses=0008 0009
06:50:01 Msec=3000  True Az=112.995  Ze=-59.325  Az status=0008  Ze status=0009
06:50:01 Check angles
06:50:01 SkyScan query
06:50:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.325<-14555  Statuses=0008 0009
06:50:02 Msec=3750  True Az=112.995  Ze=-38.325  Az status=0008  Ze status=0009
06:50:02 Check angles
06:50:02 SkyScan query
06:50:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.4<-13160  Statuses=0008 0009
06:50:03 Msec=4500  True Az=112.995  Ze=-17.4  Az status=0008  Ze status=0009
06:50:03 Check angles
06:50:03 SkyScan query
06:50:03 SkyScan query done: ret=0  az=112.995<-7533  ze=3.57<-11762  Statuses=0008 0009
06:50:03 Msec=5250  True Az=112.995  Ze=3.57  Az status=0008  Ze status=0009
06:50:04 Check angles
06:50:04 SkyScan query
06:50:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:50:04 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:50:04 Message to Master queued w/err=0: serial=347691 error=0
06:50:09 Received message from Master: op=Filter serial=347692
06:50:09 Color wheel filter change from 0 to 0
06:50:09 FLIGetFilterPos err=0  currentPosition=0
06:50:09 FLIGetStepsRemaining err=0  RemainingSteps=0
06:50:09 Filter is already there-color wheel unchanged
06:50:09 Received message from Master: op=Shutter serial=347693
06:50:09 Shutter LASER close
06:50:10 Received message from Camera: op=State serial=347695
06:50:10 GetSingleValue result=40  Value=cccccccc
06:50:10 SkyScan query
06:50:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:50:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:50:10 Parameters OK
06:50:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:50:10 Set A/D data flow result=40
06:50:10 Set A/D channel type result=40
06:50:10 Set A/D encoding result=40
06:50:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:50:10 Set channel filter=0.000000e+000  result=40
06:50:10 Config A/D  Result=40
06:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:50:10 Get A/D filter: -9.255963e+061  result=40
06:50:10 Get A/D value=-858993460  result=40
06:50:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:50:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:50:10 Parameters OK
06:50:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:50:10 Set A/D data flow result=40
06:50:10 Set A/D channel type result=40
06:50:10 Set A/D encoding result=40
06:50:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:50:10 Set channel filter=0.000000e+000  result=40
06:50:10 Config A/D  Result=40
06:50:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:50:10 Get A/D filter: -9.255963e+061  result=40
06:50:10 Get A/D value=-858993460  result=40
06:50:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:50:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:50:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:50:10 Aux=
06:50:10 Message to Camera, serial 347695 queued
06:50:47 Received message from Master: op=PointingHead serial=347708
06:50:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:50:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:50:47 Point started: ret=0
06:50:47 point_skyscan result=0
06:50:48 Check angles
06:50:48 SkyScan query
06:50:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:50:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:50:49 Message to Master queued w/err=0: serial=347708 error=0
06:50:54 Received message from Master: op=Filter serial=347709
06:50:54 Color wheel filter change from 0 to 0
06:50:54 FLIGetFilterPos err=0  currentPosition=0
06:50:54 FLIGetStepsRemaining err=0  RemainingSteps=0
06:50:54 Filter is already there-color wheel unchanged
06:50:54 Received message from Master: op=Shutter serial=347710
06:50:54 Shutter LASER close
06:50:54 Received message from Camera: op=State serial=347712
06:50:54 GetSingleValue result=40  Value=cccccccc
06:50:54 SkyScan query
06:50:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:50:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:50:54 Parameters OK
06:50:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:50:54 Set A/D data flow result=40
06:50:54 Set A/D channel type result=40
06:50:54 Set A/D encoding result=40
06:50:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:50:54 Set channel filter=0.000000e+000  result=40
06:50:54 Config A/D  Result=40
06:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:50:54 Get A/D filter: -9.255963e+061  result=40
06:50:54 Get A/D value=-858993460  result=40
06:50:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:50:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:50:54 Parameters OK
06:50:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:50:54 Set A/D data flow result=40
06:50:54 Set A/D channel type result=40
06:50:54 Set A/D encoding result=40
06:50:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:50:54 Set channel filter=0.000000e+000  result=40
06:50:54 Config A/D  Result=40
06:50:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:50:54 Get A/D filter: -9.255963e+061  result=40
06:50:54 Get A/D value=-858993460  result=40
06:50:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:50:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:50:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:50:54 Aux=
06:50:54 Message to Camera, serial 347712 queued
06:51:31 Received message from Master: op=PointingHead serial=347725
06:51:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:51:31 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:51:32 Point started: ret=0
06:51:32 point_skyscan result=0
06:51:32 Check angles
06:51:32 SkyScan query
06:51:33 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
06:51:33 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
06:51:33 Check angles
06:51:33 SkyScan query
06:51:34 SkyScan query done: ret=0  az=153.495<-10233  ze=-6.495<-12433  Statuses=0009 0008
06:51:34 Msec=750  True Az=153.495  Ze=-6.495  Az status=0009  Ze status=0008
06:51:34 Check angles
06:51:34 SkyScan query
06:51:34 SkyScan query done: ret=0  az=171<-11400  ze=-6.495<-12433  Statuses=0009 0008
06:51:34 Msec=1500  True Az=171  Ze=-6.495  Az status=0009  Ze status=0008
06:51:35 Check angles
06:51:35 SkyScan query
06:51:35 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:51:35 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:51:35 Message to Master queued w/err=0: serial=347725 error=0
06:51:40 Received message from Master: op=Filter serial=347726
06:51:40 Color wheel filter change from 0 to 0
06:51:40 FLIGetFilterPos err=0  currentPosition=0
06:51:40 FLIGetStepsRemaining err=0  RemainingSteps=0
06:51:40 Filter is already there-color wheel unchanged
06:51:40 Received message from Master: op=Shutter serial=347727
06:51:40 Shutter LASER close
06:51:40 Received message from Camera: op=State serial=347729
06:51:40 GetSingleValue result=40  Value=cccccccc
06:51:40 SkyScan query
06:51:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:51:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:51:41 Parameters OK
06:51:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:51:41 Set A/D data flow result=40
06:51:41 Set A/D channel type result=40
06:51:41 Set A/D encoding result=40
06:51:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:51:41 Set channel filter=0.000000e+000  result=40
06:51:41 Config A/D  Result=40
06:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:51:41 Get A/D filter: -9.255963e+061  result=40
06:51:41 Get A/D value=-858993460  result=40
06:51:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:51:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:51:41 Parameters OK
06:51:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:51:41 Set A/D data flow result=40
06:51:41 Set A/D channel type result=40
06:51:41 Set A/D encoding result=40
06:51:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:51:41 Set channel filter=0.000000e+000  result=40
06:51:41 Config A/D  Result=40
06:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:51:41 Get A/D filter: -9.255963e+061  result=40
06:51:41 Get A/D value=-858993460  result=40
06:51:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:51:41 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:51:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:51:41 Aux=
06:51:41 Message to Camera, serial 347729 queued
06:52:18 Received message from Master: op=PointingHead serial=347742
06:52:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:52:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:52:18 Point started: ret=0
06:52:18 point_skyscan result=0
06:52:19 Check angles
06:52:19 SkyScan query
06:52:20 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
06:52:20 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
06:52:20 Check angles
06:52:20 SkyScan query
06:52:20 SkyScan query done: ret=0  az=135.285<-9019  ze=6.495<-11567  Statuses=0009 0008
06:52:20 Msec=750  True Az=135.285  Ze=6.495  Az status=0009  Ze status=0008
06:52:20 Check angles
06:52:20 SkyScan query
06:52:21 SkyScan query done: ret=0  az=117.42<-7828  ze=6.495<-11567  Statuses=0009 0008
06:52:21 Msec=1500  True Az=117.42  Ze=6.495  Az status=0009  Ze status=0008
06:52:21 Check angles
06:52:21 SkyScan query
06:52:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:52:22 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:52:22 Message to Master queued w/err=0: serial=347742 error=0
06:52:27 Received message from Master: op=Filter serial=347743
06:52:27 Color wheel filter change from 0 to 0
06:52:27 FLIGetFilterPos err=0  currentPosition=0
06:52:27 FLIGetStepsRemaining err=0  RemainingSteps=0
06:52:27 Filter is already there-color wheel unchanged
06:52:27 Received message from Master: op=Shutter serial=347744
06:52:27 Shutter LASER close
06:52:27 Received message from Camera: op=State serial=347746
06:52:27 GetSingleValue result=40  Value=cccccccc
06:52:27 SkyScan query
06:52:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:52:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:52:28 Parameters OK
06:52:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:52:28 Set A/D data flow result=40
06:52:28 Set A/D channel type result=40
06:52:28 Set A/D encoding result=40
06:52:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:52:28 Set channel filter=0.000000e+000  result=40
06:52:28 Config A/D  Result=40
06:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:52:28 Get A/D filter: -9.255963e+061  result=40
06:52:28 Get A/D value=-858993460  result=40
06:52:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:52:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:52:28 Parameters OK
06:52:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:52:28 Set A/D data flow result=40
06:52:28 Set A/D channel type result=40
06:52:28 Set A/D encoding result=40
06:52:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:52:28 Set channel filter=0.000000e+000  result=40
06:52:28 Config A/D  Result=40
06:52:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:52:28 Get A/D filter: -9.255963e+061  result=40
06:52:28 Get A/D value=-858993460  result=40
06:52:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:52:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:52:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:52:28 Aux=
06:52:28 Message to Camera, serial 347746 queued
06:53:05 Received message from Master: op=PointingHead serial=347759
06:53:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:53:05 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:53:05 Point started: ret=0
06:53:05 point_skyscan result=0
06:53:06 Check angles
06:53:06 SkyScan query
06:53:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
06:53:06 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
06:53:06 Check angles
06:53:06 SkyScan query
06:53:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.895<-14993  Statuses=0008 0009
06:53:07 Msec=750  True Az=112.995  Ze=-44.895  Az status=0008  Ze status=0009
06:53:07 Check angles
06:53:07 SkyScan query
06:53:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.82<-16388  Statuses=0008 0009
06:53:08 Msec=1500  True Az=112.995  Ze=-65.82  Az status=0008  Ze status=0009
06:53:08 Check angles
06:53:08 SkyScan query
06:53:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
06:53:08 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
06:53:09 Check angles
06:53:09 SkyScan query
06:53:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.76<-19184  Statuses=0008 0009
06:53:09 Msec=3000  True Az=112.995  Ze=-107.76  Az status=0008  Ze status=0009
06:53:09 Check angles
06:53:09 SkyScan query
06:53:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
06:53:10 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
06:53:10 Check angles
06:53:10 SkyScan query
06:53:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.09<-22006  Statuses=0008 0009
06:53:11 Msec=4500  True Az=112.995  Ze=-150.09  Az status=0008  Ze status=0009
06:53:11 Check angles
06:53:11 SkyScan query
06:53:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.94<-23396  Statuses=0008 0009
06:53:11 Msec=5250  True Az=112.995  Ze=-170.94  Az status=0008  Ze status=0009
06:53:12 Check angles
06:53:12 SkyScan query
06:53:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:53:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:53:12 Message to Master queued w/err=0: serial=347759 error=0
06:53:17 Received message from Master: op=Filter serial=347760
06:53:17 Color wheel filter change from 0 to 0
06:53:17 FLIGetFilterPos err=0  currentPosition=0
06:53:17 FLIGetStepsRemaining err=0  RemainingSteps=0
06:53:17 Filter is already there-color wheel unchanged
06:53:17 Received message from Master: op=Shutter serial=347761
06:53:17 Shutter LASER open
06:53:18 Received message from Camera: op=State serial=347763
06:53:18 GetSingleValue result=40  Value=cccccccc
06:53:18 SkyScan query
06:53:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:53:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:18 Parameters OK
06:53:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:18 Set A/D data flow result=40
06:53:18 Set A/D channel type result=40
06:53:18 Set A/D encoding result=40
06:53:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:18 Set channel filter=0.000000e+000  result=40
06:53:18 Config A/D  Result=40
06:53:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:18 Get A/D filter: -9.255963e+061  result=40
06:53:18 Get A/D value=-858993460  result=40
06:53:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:18 Parameters OK
06:53:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:18 Set A/D data flow result=40
06:53:18 Set A/D channel type result=40
06:53:18 Set A/D encoding result=40
06:53:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:18 Set channel filter=0.000000e+000  result=40
06:53:18 Config A/D  Result=40
06:53:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:18 Get A/D filter: -9.255963e+061  result=40
06:53:18 Get A/D value=-858993460  result=40
06:53:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:53:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:53:18 Aux=
06:53:18 Message to Camera, serial 347763 queued
06:53:27 Received message from Master: op=Shutter serial=347773
06:53:27 Shutter LASER close
06:53:27 Received message from Master: op=PointingHead serial=347777
06:53:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:53:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:53:27 Point started: ret=0
06:53:27 point_skyscan result=0
06:53:28 Check angles
06:53:28 SkyScan query
06:53:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.355<-21557  Statuses=0008 0009
06:53:29 Msec=0  True Az=112.995  Ze=-143.355  Az status=0008  Ze status=0009
06:53:29 Check angles
06:53:29 SkyScan query
06:53:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
06:53:29 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
06:53:30 Check angles
06:53:30 SkyScan query
06:53:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.025<-18735  Statuses=0008 0009
06:53:30 Msec=1500  True Az=112.995  Ze=-101.025  Az status=0008  Ze status=0009
06:53:30 Check angles
06:53:30 SkyScan query
06:53:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.07<-17338  Statuses=0008 0009
06:53:31 Msec=2250  True Az=112.995  Ze=-80.07  Az status=0008  Ze status=0009
06:53:31 Check angles
06:53:31 SkyScan query
06:53:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.13<-15942  Statuses=0008 0009
06:53:32 Msec=3000  True Az=112.995  Ze=-59.13  Az status=0008  Ze status=0009
06:53:32 Check angles
06:53:32 SkyScan query
06:53:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.13<-14542  Statuses=0008 0009
06:53:32 Msec=3750  True Az=112.995  Ze=-38.13  Az status=0008  Ze status=0009
06:53:33 Check angles
06:53:33 SkyScan query
06:53:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
06:53:33 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
06:53:33 Check angles
06:53:33 SkyScan query
06:53:34 SkyScan query done: ret=0  az=112.995<-7533  ze=3.765<-11749  Statuses=0008 0009
06:53:34 Msec=5250  True Az=112.995  Ze=3.765  Az status=0008  Ze status=0009
06:53:34 Check angles
06:53:34 SkyScan query
06:53:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:53:35 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:53:35 Message to Master queued w/err=0: serial=347777 error=0
06:53:40 Received message from Master: op=Filter serial=347778
06:53:40 Color wheel filter change from 0 to 0
06:53:40 FLIGetFilterPos err=0  currentPosition=0
06:53:40 FLIGetStepsRemaining err=0  RemainingSteps=0
06:53:40 Filter is already there-color wheel unchanged
06:53:40 Received message from Master: op=Shutter serial=347779
06:53:40 Shutter LASER close
06:53:40 Received message from Camera: op=State serial=347781
06:53:40 GetSingleValue result=40  Value=cccccccc
06:53:40 SkyScan query
06:53:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:53:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:41 Parameters OK
06:53:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:41 Set A/D data flow result=40
06:53:41 Set A/D channel type result=40
06:53:41 Set A/D encoding result=40
06:53:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:41 Set channel filter=0.000000e+000  result=40
06:53:41 Config A/D  Result=40
06:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:41 Get A/D filter: -9.255963e+061  result=40
06:53:41 Get A/D value=-858993460  result=40
06:53:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:41 Parameters OK
06:53:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:41 Set A/D data flow result=40
06:53:41 Set A/D channel type result=40
[UTC 2019-3-19  06:53:41]
06:53:41 Set A/D encoding result=40
06:53:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:41 Set channel filter=0.000000e+000  result=40
06:53:41 Config A/D  Result=40
06:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:41 Get A/D filter: -9.255963e+061  result=40
06:53:41 Get A/D value=-858993460  result=40
06:53:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:53:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:53:41 Aux=
06:53:41 Message to Camera, serial 347781 queued
06:54:17 Received message from Master: op=PointingHead serial=347794
06:54:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:54:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:54:18 Point started: ret=0
06:54:18 point_skyscan result=0
06:54:19 Check angles
06:54:19 SkyScan query
06:54:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:54:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:54:19 Message to Master queued w/err=0: serial=347794 error=0
06:54:24 Received message from Master: op=Filter serial=347795
06:54:24 Color wheel filter change from 0 to 0
06:54:24 FLIGetFilterPos err=0  currentPosition=0
06:54:24 FLIGetStepsRemaining err=0  RemainingSteps=0
06:54:24 Filter is already there-color wheel unchanged
06:54:24 Received message from Master: op=Shutter serial=347796
06:54:24 Shutter LASER close
06:54:24 Received message from Camera: op=State serial=347798
06:54:24 GetSingleValue result=40  Value=cccccccc
06:54:24 SkyScan query
06:54:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:54:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:54:25 Parameters OK
06:54:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:54:25 Set A/D data flow result=40
06:54:25 Set A/D channel type result=40
06:54:25 Set A/D encoding result=40
06:54:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:54:25 Set channel filter=0.000000e+000  result=40
06:54:25 Config A/D  Result=40
06:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:54:25 Get A/D filter: -9.255963e+061  result=40
06:54:25 Get A/D value=-858993460  result=40
06:54:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:54:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:54:25 Parameters OK
06:54:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:54:25 Set A/D data flow result=40
06:54:25 Set A/D channel type result=40
06:54:25 Set A/D encoding result=40
06:54:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:54:25 Set channel filter=0.000000e+000  result=40
06:54:25 Config A/D  Result=40
06:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:54:25 Get A/D filter: -9.255963e+061  result=40
06:54:25 Get A/D value=-858993460  result=40
06:54:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:54:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:54:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:54:25 Aux=
06:54:25 Message to Camera, serial 347798 queued
06:55:02 Received message from Master: op=PointingHead serial=347811
06:55:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:55:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:55:02 Point started: ret=0
06:55:02 point_skyscan result=0
06:55:03 Check angles
06:55:03 SkyScan query
06:55:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:55:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:55:03 Message to Master queued w/err=0: serial=347811 error=0
06:55:08 Received message from Master: op=Filter serial=347812
06:55:08 Color wheel filter change from 0 to 0
06:55:08 FLIGetFilterPos err=0  currentPosition=0
06:55:08 FLIGetStepsRemaining err=0  RemainingSteps=0
06:55:08 Filter is already there-color wheel unchanged
06:55:09 Received message from Master: op=Shutter serial=347813
06:55:09 Shutter LASER close
06:55:09 Received message from Camera: op=State serial=347815
06:55:09 GetSingleValue result=40  Value=cccccccc
06:55:09 SkyScan query
06:55:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:55:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:55:09 Parameters OK
06:55:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:55:09 Set A/D data flow result=40
06:55:09 Set A/D channel type result=40
06:55:09 Set A/D encoding result=40
06:55:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:55:09 Set channel filter=0.000000e+000  result=40
06:55:09 Config A/D  Result=40
06:55:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:55:09 Get A/D filter: -9.255963e+061  result=40
06:55:09 Get A/D value=-858993460  result=40
06:55:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:55:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:55:09 Parameters OK
06:55:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:55:09 Set A/D data flow result=40
06:55:09 Set A/D channel type result=40
06:55:09 Set A/D encoding result=40
06:55:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:55:09 Set channel filter=0.000000e+000  result=40
06:55:09 Config A/D  Result=40
06:55:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:55:09 Get A/D filter: -9.255963e+061  result=40
06:55:09 Get A/D value=-858993460  result=40
06:55:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:55:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:55:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:55:09 Aux=
06:55:09 Message to Camera, serial 347815 queued
06:55:46 Received message from Master: op=PointingHead serial=347828
06:55:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:55:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:55:46 Point started: ret=0
06:55:46 point_skyscan result=0
06:55:47 Check angles
06:55:47 SkyScan query
06:55:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:55:48 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:55:48 Message to Master queued w/err=0: serial=347828 error=0
06:55:53 Received message from Master: op=Filter serial=347829
06:55:53 Color wheel filter change from 0 to 0
06:55:53 FLIGetFilterPos err=0  currentPosition=0
06:55:53 FLIGetStepsRemaining err=0  RemainingSteps=0
06:55:53 Filter is already there-color wheel unchanged
06:55:53 Received message from Master: op=Shutter serial=347830
06:55:53 Shutter LASER close
06:55:53 Received message from Camera: op=State serial=347832
06:55:53 GetSingleValue result=40  Value=cccccccc
06:55:53 SkyScan query
06:55:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:55:53 Parameters OK
06:55:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:55:53 Set A/D data flow result=40
06:55:53 Set A/D channel type result=40
06:55:53 Set A/D encoding result=40
06:55:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:55:53 Set channel filter=0.000000e+000  result=40
06:55:53 Config A/D  Result=40
06:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:55:53 Get A/D filter: -9.255963e+061  result=40
06:55:53 Get A/D value=-858993460  result=40
06:55:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:55:53 Parameters OK
06:55:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:55:53 Set A/D data flow result=40
06:55:53 Set A/D channel type result=40
06:55:53 Set A/D encoding result=40
06:55:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:55:53 Set channel filter=0.000000e+000  result=40
06:55:53 Config A/D  Result=40
06:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:55:53 Get A/D filter: -9.255963e+061  result=40
06:55:53 Get A/D value=-858993460  result=40
06:55:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:55:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:55:53 Aux=
06:55:53 Message to Camera, serial 347832 queued
06:56:30 Received message from Master: op=PointingHead serial=347845
06:56:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:56:30 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:56:31 Point started: ret=0
06:56:31 point_skyscan result=0
06:56:31 Check angles
06:56:31 SkyScan query
06:56:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
06:56:32 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
06:56:32 Check angles
06:56:32 SkyScan query
06:56:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
06:56:33 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
06:56:33 Check angles
06:56:33 SkyScan query
06:56:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
06:56:33 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
06:56:34 Check angles
06:56:34 SkyScan query
06:56:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.28<-17752  Statuses=0008 0009
06:56:34 Msec=2250  True Az=112.995  Ze=-86.28  Az status=0008  Ze status=0009
06:56:34 Check angles
06:56:34 SkyScan query
06:56:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.22<-19148  Statuses=0008 0009
06:56:35 Msec=3000  True Az=112.995  Ze=-107.22  Az status=0008  Ze status=0009
06:56:35 Check angles
06:56:35 SkyScan query
06:56:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.175<-20545  Statuses=0008 0009
06:56:36 Msec=3750  True Az=112.995  Ze=-128.175  Az status=0008  Ze status=0009
06:56:36 Check angles
06:56:36 SkyScan query
06:56:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.145<-21943  Statuses=0008 0009
06:56:36 Msec=4500  True Az=112.995  Ze=-149.145  Az status=0008  Ze status=0009
06:56:37 Check angles
06:56:37 SkyScan query
06:56:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.07<-23338  Statuses=0008 0009
06:56:37 Msec=5250  True Az=112.995  Ze=-170.07  Az status=0008  Ze status=0009
06:56:37 Check angles
06:56:37 SkyScan query
06:56:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:56:38 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:56:38 Message to Master queued w/err=0: serial=347845 error=0
06:56:43 Received message from Master: op=Filter serial=347846
06:56:43 Color wheel filter change from 0 to 0
06:56:43 FLIGetFilterPos err=0  currentPosition=0
06:56:43 FLIGetStepsRemaining err=0  RemainingSteps=0
06:56:43 Filter is already there-color wheel unchanged
06:56:43 Received message from Master: op=Shutter serial=347847
06:56:43 Shutter LASER open
06:56:43 Received message from Camera: op=State serial=347849
06:56:43 GetSingleValue result=40  Value=cccccccc
06:56:43 SkyScan query
06:56:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:56:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:56:44 Parameters OK
06:56:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:56:44 Set A/D data flow result=40
06:56:44 Set A/D channel type result=40
06:56:44 Set A/D encoding result=40
06:56:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:56:44 Set channel filter=0.000000e+000  result=40
06:56:44 Config A/D  Result=40
06:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:56:44 Get A/D filter: -9.255963e+061  result=40
06:56:44 Get A/D value=-858993460  result=40
06:56:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:56:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:56:44 Parameters OK
06:56:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:56:44 Set A/D data flow result=40
06:56:44 Set A/D channel type result=40
06:56:44 Set A/D encoding result=40
06:56:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:56:44 Set channel filter=0.000000e+000  result=40
06:56:44 Config A/D  Result=40
06:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:56:44 Get A/D filter: -9.255963e+061  result=40
06:56:44 Get A/D value=-858993460  result=40
06:56:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:56:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:56:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:56:44 Aux=
06:56:44 Message to Camera, serial 347849 queued
06:56:52 Received message from Master: op=Shutter serial=347859
06:56:52 Shutter LASER close
06:56:53 Received message from Master: op=PointingHead serial=347863
06:56:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:56:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:56:53 Point started: ret=0
06:56:53 point_skyscan result=0
06:56:54 Check angles
06:56:54 SkyScan query
06:56:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
06:56:55 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
06:56:55 Check angles
06:56:55 SkyScan query
06:56:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
06:56:55 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
06:56:56 Check angles
06:56:56 SkyScan query
06:56:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.28<-18752  Statuses=0008 0009
06:56:56 Msec=1500  True Az=112.995  Ze=-101.28  Az status=0008  Ze status=0009
06:56:56 Check angles
06:56:56 SkyScan query
06:56:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
06:56:57 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
06:56:57 Check angles
06:56:57 SkyScan query
06:56:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
06:56:58 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
06:56:58 Check angles
06:56:58 SkyScan query
06:56:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
06:56:58 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
06:56:59 Check angles
06:56:59 SkyScan query
06:56:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.445<-13163  Statuses=0008 0009
06:56:59 Msec=4500  True Az=112.995  Ze=-17.445  Az status=0008  Ze status=0009
06:56:59 Check angles
06:56:59 SkyScan query
06:57:00 SkyScan query done: ret=0  az=112.995<-7533  ze=3.525<-11765  Statuses=0008 0009
06:57:00 Msec=5250  True Az=112.995  Ze=3.525  Az status=0008  Ze status=0009
06:57:00 Check angles
06:57:00 SkyScan query
06:57:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:57:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:57:01 Message to Master queued w/err=0: serial=347863 error=0
06:57:06 Received message from Master: op=Filter serial=347864
06:57:06 Color wheel filter change from 0 to 0
06:57:06 FLIGetFilterPos err=0  currentPosition=0
06:57:06 FLIGetStepsRemaining err=0  RemainingSteps=0
06:57:06 Filter is already there-color wheel unchanged
06:57:06 Received message from Master: op=Shutter serial=347865
06:57:06 Shutter LASER close
06:57:06 Received message from Camera: op=State serial=347867
06:57:06 GetSingleValue result=40  Value=cccccccc
06:57:06 SkyScan query
06:57:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:57:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:57:07 Parameters OK
06:57:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:57:07 Set A/D data flow result=40
06:57:07 Set A/D channel type result=40
06:57:07 Set A/D encoding result=40
06:57:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:57:07 Set channel filter=0.000000e+000  result=40
06:57:07 Config A/D  Result=40
06:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:57:07 Get A/D filter: -9.255963e+061  result=40
06:57:07 Get A/D value=-858993460  result=40
06:57:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:57:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:57:07 Parameters OK
06:57:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:57:07 Set A/D data flow result=40
06:57:07 Set A/D channel type result=40
06:57:07 Set A/D encoding result=40
06:57:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:57:07 Set channel filter=0.000000e+000  result=40
06:57:07 Config A/D  Result=40
06:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:57:07 Get A/D filter: -9.255963e+061  result=40
06:57:07 Get A/D value=-858993460  result=40
06:57:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:57:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:57:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:57:07 Aux=
06:57:07 Message to Camera, serial 347867 queued
06:57:42 Received message from Master: op=PointingHead serial=347879
06:57:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:57:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:57:43 Point started: ret=0
06:57:43 point_skyscan result=0
06:57:44 Check angles
06:57:44 SkyScan query
06:57:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:57:44 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:57:44 Message to Master queued w/err=0: serial=347879 error=0
06:57:49 Received message from Master: op=Filter serial=347880
06:57:49 Color wheel filter change from 0 to 0
06:57:49 FLIGetFilterPos err=0  currentPosition=0
06:57:49 FLIGetStepsRemaining err=0  RemainingSteps=0
06:57:49 Filter is already there-color wheel unchanged
06:57:49 Received message from Master: op=Shutter serial=347881
06:57:49 Shutter LASER close
06:57:49 Received message from Camera: op=State serial=347883
06:57:49 GetSingleValue result=40  Value=cccccccc
06:57:49 SkyScan query
06:57:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:57:50 Parameters OK
06:57:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:57:50 Set A/D data flow result=40
06:57:50 Set A/D channel type result=40
06:57:50 Set A/D encoding result=40
06:57:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:57:50 Set channel filter=0.000000e+000  result=40
06:57:50 Config A/D  Result=40
06:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:57:50 Get A/D filter: -9.255963e+061  result=40
06:57:50 Get A/D value=-858993460  result=40
06:57:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:57:50 Parameters OK
06:57:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:57:50 Set A/D data flow result=40
06:57:50 Set A/D channel type result=40
06:57:50 Set A/D encoding result=40
06:57:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:57:50 Set channel filter=0.000000e+000  result=40
06:57:50 Config A/D  Result=40
06:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:57:50 Get A/D filter: -9.255963e+061  result=40
06:57:50 Get A/D value=-858993460  result=40
06:57:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:57:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:57:50 Aux=
06:57:50 Message to Camera, serial 347883 queued
06:58:27 Received message from Master: op=PointingHead serial=347896
06:58:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:58:27 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:58:27 Point started: ret=0
06:58:27 point_skyscan result=0
06:58:28 Check angles
06:58:28 SkyScan query
06:58:28 SkyScan query done: ret=0  az=135.765<-9051  ze=-6.51<-12434  Statuses=0009 0008
06:58:28 Msec=0  True Az=135.765  Ze=-6.51  Az status=0009  Ze status=0008
06:58:29 Check angles
06:58:29 SkyScan query
06:58:29 SkyScan query done: ret=0  az=153.315<-10221  ze=-6.495<-12433  Statuses=0009 0008
06:58:29 Msec=750  True Az=153.315  Ze=-6.495  Az status=0009  Ze status=0008
06:58:29 Check angles
06:58:29 SkyScan query
06:58:30 SkyScan query done: ret=0  az=170.745<-11383  ze=-6.495<-12433  Statuses=0009 0008
06:58:30 Msec=1500  True Az=170.745  Ze=-6.495  Az status=0009  Ze status=0008
06:58:30 Check angles
06:58:30 SkyScan query
06:58:31 SkyScan query done: ret=0  az=175.98<-11732  ze=-6.495<-12433  Statuses=0008 0008
06:58:31 Msec=2250  True Az=175.98  Ze=-6.495  Az status=0008  Ze status=0008
06:58:31 Message to Master queued w/err=0: serial=347896 error=0
06:58:36 Received message from Master: op=Filter serial=347897
06:58:36 Color wheel filter change from 0 to 0
06:58:36 FLIGetFilterPos err=0  currentPosition=0
06:58:36 FLIGetStepsRemaining err=0  RemainingSteps=0
06:58:36 Filter is already there-color wheel unchanged
06:58:36 Received message from Master: op=Shutter serial=347898
06:58:36 Shutter LASER close
06:58:36 Received message from Camera: op=State serial=347900
06:58:36 GetSingleValue result=40  Value=cccccccc
06:58:36 SkyScan query
06:58:36 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:58:36 Parameters OK
06:58:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:58:36 Set A/D data flow result=40
06:58:36 Set A/D channel type result=40
06:58:36 Set A/D encoding result=40
06:58:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:58:36 Set channel filter=0.000000e+000  result=40
06:58:36 Config A/D  Result=40
06:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:58:36 Get A/D filter: -9.255963e+061  result=40
06:58:36 Get A/D value=-858993460  result=40
06:58:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:58:36 Parameters OK
06:58:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:58:36 Set A/D data flow result=40
06:58:36 Set A/D channel type result=40
06:58:36 Set A/D encoding result=40
06:58:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:58:36 Set channel filter=0.000000e+000  result=40
06:58:36 Config A/D  Result=40
06:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:58:36 Get A/D filter: -9.255963e+061  result=40
06:58:36 Get A/D value=-858993460  result=40
06:58:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:58:36 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:58:36 Aux=
06:58:36 Message to Camera, serial 347900 queued
06:59:13 Received message from Master: op=PointingHead serial=347913
06:59:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:59:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:59:14 Point started: ret=0
06:59:14 point_skyscan result=0
06:59:14 Check angles
06:59:14 SkyScan query
06:59:15 SkyScan query done: ret=0  az=153.345<-10223  ze=6.51<-11566  Statuses=0009 0008
06:59:15 Msec=0  True Az=153.345  Ze=6.51  Az status=0009  Ze status=0008
06:59:15 Check angles
06:59:15 SkyScan query
06:59:16 SkyScan query done: ret=0  az=135.51<-9034  ze=6.495<-11567  Statuses=0009 0008
06:59:16 Msec=750  True Az=135.51  Ze=6.495  Az status=0009  Ze status=0008
06:59:16 Check angles
06:59:16 SkyScan query
06:59:16 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
06:59:16 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
06:59:17 Check angles
06:59:17 SkyScan query
06:59:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:59:17 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:59:17 Message to Master queued w/err=0: serial=347913 error=0
06:59:22 Received message from Master: op=Filter serial=347914
06:59:22 Color wheel filter change from 0 to 0
06:59:22 FLIGetFilterPos err=0  currentPosition=0
06:59:22 FLIGetStepsRemaining err=0  RemainingSteps=0
06:59:22 Filter is already there-color wheel unchanged
06:59:22 Received message from Master: op=Shutter serial=347915
06:59:22 Shutter LASER close
06:59:22 Received message from Camera: op=State serial=347917
06:59:22 GetSingleValue result=40  Value=cccccccc
06:59:22 SkyScan query
06:59:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:59:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:59:23 Parameters OK
06:59:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:59:23 Set A/D data flow result=40
06:59:23 Set A/D channel type result=40
06:59:23 Set A/D encoding result=40
06:59:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:59:23 Set channel filter=0.000000e+000  result=40
06:59:23 Config A/D  Result=40
06:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:59:23 Get A/D filter: -9.255963e+061  result=40
06:59:23 Get A/D value=-858993460  result=40
06:59:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:59:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:59:23 Parameters OK
06:59:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:59:23 Set A/D data flow result=40
06:59:23 Set A/D channel type result=40
06:59:23 Set A/D encoding result=40
06:59:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:59:23 Set channel filter=0.000000e+000  result=40
06:59:23 Config A/D  Result=40
06:59:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:59:23 Get A/D filter: -9.255963e+061  result=40
06:59:23 Get A/D value=-858993460  result=40
06:59:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:59:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:59:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:59:23 Aux=
06:59:23 Message to Camera, serial 347917 queued
07:00:00 Received message from Master: op=PointingHead serial=347930
07:00:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:00:00 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:00:00 Point started: ret=0
07:00:00 point_skyscan result=0
07:00:01 Check angles
07:00:01 SkyScan query
07:00:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
07:00:02 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
07:00:02 Check angles
07:00:02 SkyScan query
07:00:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.07<-14938  Statuses=0008 0009
07:00:02 Msec=750  True Az=112.995  Ze=-44.07  Az status=0008  Ze status=0009
07:00:02 Check angles
07:00:02 SkyScan query
07:00:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.025<-16335  Statuses=0008 0009
07:00:03 Msec=1500  True Az=112.995  Ze=-65.025  Az status=0008  Ze status=0009
07:00:03 Check angles
07:00:03 SkyScan query
07:00:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.98<-17732  Statuses=0008 0009
07:00:04 Msec=2250  True Az=112.995  Ze=-85.98  Az status=0008  Ze status=0009
07:00:04 Check angles
07:00:04 SkyScan query
07:00:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.935<-19129  Statuses=0008 0009
07:00:05 Msec=3000  True Az=112.995  Ze=-106.935  Az status=0008  Ze status=0009
07:00:05 Check angles
07:00:05 SkyScan query
07:00:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.905<-20527  Statuses=0008 0009
07:00:05 Msec=3750  True Az=112.995  Ze=-127.905  Az status=0008  Ze status=0009
07:00:05 Check angles
07:00:05 SkyScan query
07:00:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.28<-21952  Statuses=0008 0009
07:00:06 Msec=4500  True Az=112.995  Ze=-149.28  Az status=0008  Ze status=0009
07:00:06 Check angles
07:00:06 SkyScan query
07:00:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.61<-23374  Statuses=0008 0009
07:00:07 Msec=5250  True Az=112.995  Ze=-170.61  Az status=0008  Ze status=0009
07:00:07 Check angles
07:00:07 SkyScan query
07:00:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:00:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:00:08 Message to Master queued w/err=0: serial=347930 error=0
07:00:13 Received message from Master: op=Filter serial=347931
07:00:13 Color wheel filter change from 0 to 0
07:00:13 FLIGetFilterPos err=0  currentPosition=0
07:00:13 FLIGetStepsRemaining err=0  RemainingSteps=0
07:00:13 Filter is already there-color wheel unchanged
07:00:13 Received message from Master: op=Shutter serial=347932
07:00:13 Shutter LASER open
07:00:13 Received message from Camera: op=State serial=347934
07:00:13 GetSingleValue result=40  Value=cccccccc
07:00:13 SkyScan query
07:00:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:00:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:14 Parameters OK
07:00:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:14 Set A/D data flow result=40
07:00:14 Set A/D channel type result=40
07:00:14 Set A/D encoding result=40
07:00:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:14 Set channel filter=0.000000e+000  result=40
07:00:14 Config A/D  Result=40
07:00:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:14 Get A/D filter: -9.255963e+061  result=40
07:00:14 Get A/D value=-858993460  result=40
07:00:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:14 Parameters OK
07:00:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:14 Set A/D data flow result=40
07:00:14 Set A/D channel type result=40
07:00:14 Set A/D encoding result=40
07:00:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:14 Set channel filter=0.000000e+000  result=40
07:00:14 Config A/D  Result=40
07:00:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:14 Get A/D filter: -9.255963e+061  result=40
07:00:14 Get A/D value=-858993460  result=40
07:00:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:00:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:00:14 Aux=
07:00:14 Message to Camera, serial 347934 queued
07:00:22 Received message from Master: op=Shutter serial=347944
07:00:22 Shutter LASER close
07:00:22 Received message from Master: op=PointingHead serial=347948
07:00:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:00:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:00:23 Point started: ret=0
07:00:23 point_skyscan result=0
07:00:23 Check angles
07:00:23 SkyScan query
07:00:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
07:00:24 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
07:00:24 Check angles
07:00:24 SkyScan query
07:00:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.52<-20168  Statuses=0008 0009
07:00:25 Msec=750  True Az=112.995  Ze=-122.52  Az status=0008  Ze status=0009
07:00:25 Check angles
07:00:25 SkyScan query
07:00:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.535<-18769  Statuses=0008 0009
07:00:26 Msec=1500  True Az=112.995  Ze=-101.535  Az status=0008  Ze status=0009
07:00:26 Check angles
07:00:26 SkyScan query
07:00:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.565<-17371  Statuses=0008 0009
07:00:26 Msec=2250  True Az=112.995  Ze=-80.565  Az status=0008  Ze status=0009
07:00:26 Check angles
07:00:26 SkyScan query
07:00:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.22<-15948  Statuses=0008 0009
07:00:27 Msec=3000  True Az=112.995  Ze=-59.22  Az status=0008  Ze status=0009
07:00:27 Check angles
07:00:27 SkyScan query
07:00:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.22<-14548  Statuses=0008 0009
07:00:28 Msec=3750  True Az=112.995  Ze=-38.22  Az status=0008  Ze status=0009
07:00:28 Check angles
07:00:28 SkyScan query
07:00:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.295<-13153  Statuses=0008 0009
07:00:29 Msec=4500  True Az=112.995  Ze=-17.295  Az status=0008  Ze status=0009
07:00:29 Check angles
07:00:29 SkyScan query
07:00:29 SkyScan query done: ret=0  az=112.995<-7533  ze=4.095<-11727  Statuses=0008 0009
07:00:29 Msec=5250  True Az=112.995  Ze=4.095  Az status=0008  Ze status=0009
07:00:30 Check angles
07:00:30 SkyScan query
07:00:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:00:30 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:00:30 Message to Master queued w/err=0: serial=347948 error=0
07:00:35 Received message from Master: op=Filter serial=347949
07:00:35 Color wheel filter change from 0 to 0
07:00:35 FLIGetFilterPos err=0  currentPosition=0
07:00:35 FLIGetStepsRemaining err=0  RemainingSteps=0
07:00:35 Filter is already there-color wheel unchanged
07:00:35 Received message from Master: op=Shutter serial=347950
07:00:35 Shutter LASER close
07:00:35 Received message from Camera: op=State serial=347952
07:00:35 GetSingleValue result=40  Value=cccccccc
07:00:35 SkyScan query
07:00:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:00:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:36 Parameters OK
07:00:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:36 Set A/D data flow result=40
07:00:36 Set A/D channel type result=40
07:00:36 Set A/D encoding result=40
07:00:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:36 Set channel filter=0.000000e+000  result=40
07:00:36 Config A/D  Result=40
07:00:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:36 Get A/D filter: -9.255963e+061  result=40
07:00:36 Get A/D value=-858993460  result=40
07:00:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:36 Parameters OK
07:00:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:36 Set A/D data flow result=40
07:00:36 Set A/D channel type result=40
07:00:36 Set A/D encoding result=40
07:00:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:36 Set channel filter=0.000000e+000  result=40
07:00:36 Config A/D  Result=40
07:00:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:36 Get A/D filter: -9.255963e+061  result=40
07:00:36 Get A/D value=-858993460  result=40
07:00:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:00:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:00:36 Aux=
07:00:36 Message to Camera, serial 347952 queued
07:01:12 Received message from Master: op=PointingHead serial=347964
07:01:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:01:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:01:12 Point started: ret=0
07:01:12 point_skyscan result=0
07:01:13 Check angles
07:01:13 SkyScan query
07:01:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:01:14 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:01:14 Message to Master queued w/err=0: serial=347964 error=0
07:01:19 Received message from Master: op=Filter serial=347965
07:01:19 Color wheel filter change from 0 to 0
07:01:19 FLIGetFilterPos err=0  currentPosition=0
07:01:19 FLIGetStepsRemaining err=0  RemainingSteps=0
07:01:19 Filter is already there-color wheel unchanged
07:01:19 Received message from Master: op=Shutter serial=347966
07:01:19 Shutter LASER close
07:01:19 Received message from Camera: op=State serial=347968
07:01:19 GetSingleValue result=40  Value=cccccccc
07:01:19 SkyScan query
07:01:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:01:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:01:19 Parameters OK
07:01:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:01:19 Set A/D data flow result=40
07:01:19 Set A/D channel type result=40
07:01:19 Set A/D encoding result=40
07:01:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:01:19 Set channel filter=0.000000e+000  result=40
07:01:19 Config A/D  Result=40
07:01:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:01:19 Get A/D filter: -9.255963e+061  result=40
07:01:19 Get A/D value=-858993460  result=40
07:01:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:01:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:01:19 Parameters OK
07:01:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:01:19 Set A/D data flow result=40
07:01:19 Set A/D channel type result=40
07:01:19 Set A/D encoding result=40
07:01:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:01:19 Set channel filter=0.000000e+000  result=40
07:01:19 Config A/D  Result=40
07:01:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:01:19 Get A/D filter: -9.255963e+061  result=40
07:01:19 Get A/D value=-858993460  result=40
07:01:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:01:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:01:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:01:19 Aux=
07:01:19 Message to Camera, serial 347968 queued
07:01:56 Received message from Master: op=PointingHead serial=347981
07:01:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:01:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:01:57 Point started: ret=0
07:01:57 point_skyscan result=0
07:01:57 Check angles
07:01:57 SkyScan query
07:01:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:01:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:01:58 Message to Master queued w/err=0: serial=347981 error=0
07:02:03 Received message from Master: op=Filter serial=347982
07:02:03 Color wheel filter change from 0 to 0
07:02:03 FLIGetFilterPos err=0  currentPosition=0
07:02:03 FLIGetStepsRemaining err=0  RemainingSteps=0
07:02:03 Filter is already there-color wheel unchanged
07:02:03 Received message from Master: op=Shutter serial=347983
07:02:03 Shutter LASER close
07:02:03 Received message from Camera: op=State serial=347985
07:02:03 GetSingleValue result=40  Value=cccccccc
07:02:03 SkyScan query
07:02:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:02:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:02:04 Parameters OK
07:02:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:02:04 Set A/D data flow result=40
07:02:04 Set A/D channel type result=40
07:02:04 Set A/D encoding result=40
07:02:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:02:04 Set channel filter=0.000000e+000  result=40
07:02:04 Config A/D  Result=40
07:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:02:04 Get A/D filter: -9.255963e+061  result=40
07:02:04 Get A/D value=-858993460  result=40
07:02:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:02:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:02:04 Parameters OK
07:02:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:02:04 Set A/D data flow result=40
07:02:04 Set A/D channel type result=40
07:02:04 Set A/D encoding result=40
07:02:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:02:04 Set channel filter=0.000000e+000  result=40
07:02:04 Config A/D  Result=40
07:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:02:04 Get A/D filter: -9.255963e+061  result=40
07:02:04 Get A/D value=-858993460  result=40
07:02:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:02:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:02:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:02:04 Aux=
07:02:04 Message to Camera, serial 347985 queued
07:02:40 Received message from Master: op=PointingHead serial=347997
07:02:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:02:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:02:40 Point started: ret=0
07:02:40 point_skyscan result=0
07:02:41 Check angles
07:02:41 SkyScan query
07:02:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:02:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:02:41 Message to Master queued w/err=0: serial=347997 error=0
07:02:46 Received message from Master: op=Filter serial=347998
07:02:46 Color wheel filter change from 0 to 0
07:02:46 FLIGetFilterPos err=0  currentPosition=0
07:02:46 FLIGetStepsRemaining err=0  RemainingSteps=0
07:02:46 Filter is already there-color wheel unchanged
07:02:46 Received message from Master: op=Shutter serial=347999
07:02:46 Shutter LASER close
07:02:47 Received message from Camera: op=State serial=348001
07:02:47 GetSingleValue result=40  Value=cccccccc
07:02:47 SkyScan query
07:02:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:02:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:02:47 Parameters OK
07:02:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:02:47 Set A/D data flow result=40
07:02:47 Set A/D channel type result=40
07:02:47 Set A/D encoding result=40
07:02:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:02:47 Set channel filter=0.000000e+000  result=40
07:02:47 Config A/D  Result=40
07:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:02:47 Get A/D filter: -9.255963e+061  result=40
07:02:47 Get A/D value=-858993460  result=40
07:02:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:02:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:02:47 Parameters OK
07:02:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:02:47 Set A/D data flow result=40
07:02:47 Set A/D channel type result=40
07:02:47 Set A/D encoding result=40
07:02:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:02:47 Set channel filter=0.000000e+000  result=40
07:02:47 Config A/D  Result=40
07:02:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:02:47 Get A/D filter: -9.255963e+061  result=40
07:02:47 Get A/D value=-858993460  result=40
07:02:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:02:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:02:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:02:47 Aux=
07:02:47 Message to Camera, serial 348001 queued
07:03:24 Received message from Master: op=PointingHead serial=348014
07:03:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:03:24 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:03:24 Point started: ret=0
07:03:24 point_skyscan result=0
07:03:25 Check angles
07:03:25 SkyScan query
07:03:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.655<-13577  Statuses=0008 0009
07:03:26 Msec=0  True Az=112.995  Ze=-23.655  Az status=0008  Ze status=0009
07:03:26 Check angles
07:03:26 SkyScan query
07:03:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.655<-14977  Statuses=0008 0009
07:03:26 Msec=750  True Az=112.995  Ze=-44.655  Az status=0008  Ze status=0009
07:03:27 Check angles
07:03:27 SkyScan query
07:03:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.565<-16371  Statuses=0008 0009
07:03:27 Msec=1500  True Az=112.995  Ze=-65.565  Az status=0008  Ze status=0009
07:03:27 Check angles
07:03:27 SkyScan query
07:03:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.52<-17768  Statuses=0008 0009
07:03:28 Msec=2250  True Az=112.995  Ze=-86.52  Az status=0008  Ze status=0009
07:03:28 Check angles
07:03:28 SkyScan query
07:03:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.46<-19164  Statuses=0008 0009
07:03:29 Msec=3000  True Az=112.995  Ze=-107.46  Az status=0008  Ze status=0009
07:03:29 Check angles
07:03:29 SkyScan query
07:03:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.4<-20560  Statuses=0008 0009
07:03:29 Msec=3750  True Az=112.995  Ze=-128.4  Az status=0008  Ze status=0009
07:03:30 Check angles
07:03:30 SkyScan query
07:03:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.805<-21987  Statuses=0008 0009
07:03:30 Msec=4500  True Az=112.995  Ze=-149.805  Az status=0008  Ze status=0009
07:03:30 Check angles
07:03:30 SkyScan query
07:03:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.7<-23380  Statuses=0008 0009
07:03:31 Msec=5250  True Az=112.995  Ze=-170.7  Az status=0008  Ze status=0009
07:03:31 Check angles
07:03:31 SkyScan query
07:03:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:03:32 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:03:32 Message to Master queued w/err=0: serial=348014 error=0
07:03:35 Received message from Master: op=Identify serial=348015
07:03:37 Received message from Master: op=Filter serial=348018
07:03:37 Color wheel filter change from 0 to 0
07:03:37 FLIGetFilterPos err=0  currentPosition=0
07:03:37 FLIGetStepsRemaining err=0  RemainingSteps=0
07:03:37 Filter is already there-color wheel unchanged
07:03:37 Received message from Master: op=Shutter serial=348019
07:03:37 Shutter LASER open
07:03:37 Received message from Camera: op=State serial=348021
07:03:37 GetSingleValue result=40  Value=cccccccc
07:03:37 SkyScan query
07:03:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:03:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:03:38 Parameters OK
07:03:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:03:38 Set A/D data flow result=40
07:03:38 Set A/D channel type result=40
07:03:38 Set A/D encoding result=40
07:03:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:03:38 Set channel filter=0.000000e+000  result=40
07:03:38 Config A/D  Result=40
07:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:03:38 Get A/D filter: -9.255963e+061  result=40
07:03:38 Get A/D value=-858993460  result=40
07:03:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:03:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:03:38 Parameters OK
07:03:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:03:38 Set A/D data flow result=40
07:03:38 Set A/D channel type result=40
07:03:38 Set A/D encoding result=40
07:03:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:03:38 Set channel filter=0.000000e+000  result=40
07:03:38 Config A/D  Result=40
07:03:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:03:38 Get A/D filter: -9.255963e+061  result=40
07:03:38 Get A/D value=-858993460  result=40
07:03:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:03:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:03:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:03:38 Aux=
07:03:38 Message to Camera, serial 348021 queued
07:03:46 Received message from Master: op=Shutter serial=348031
07:03:46 Shutter LASER close
07:03:47 Received message from Master: op=PointingHead serial=348035
07:03:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:03:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:03:47 Point started: ret=0
07:03:47 point_skyscan result=0
[UTC 2019-3-19  07:03:48]
07:03:48 Check angles
07:03:48 SkyScan query
07:03:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.445<-21563  Statuses=0008 0009
07:03:48 Msec=0  True Az=112.995  Ze=-143.445  Az status=0008  Ze status=0009
07:03:48 Check angles
07:03:48 SkyScan query
07:03:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.505<-20167  Statuses=0008 0009
07:03:49 Msec=750  True Az=112.995  Ze=-122.505  Az status=0008  Ze status=0009
07:03:49 Check angles
07:03:49 SkyScan query
07:03:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.115<-18741  Statuses=0008 0009
07:03:50 Msec=1500  True Az=112.995  Ze=-101.115  Az status=0008  Ze status=0009
07:03:50 Check angles
07:03:50 SkyScan query
07:03:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.16<-17344  Statuses=0008 0009
07:03:50 Msec=2250  True Az=112.995  Ze=-80.16  Az status=0008  Ze status=0009
07:03:51 Check angles
07:03:51 SkyScan query
07:03:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.22<-15948  Statuses=0008 0009
07:03:51 Msec=3000  True Az=112.995  Ze=-59.22  Az status=0008  Ze status=0009
07:03:51 Check angles
07:03:51 SkyScan query
07:03:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.8<-14520  Statuses=0008 0009
07:03:52 Msec=3750  True Az=112.995  Ze=-37.8  Az status=0008  Ze status=0009
07:03:52 Check angles
07:03:52 SkyScan query
07:03:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
07:03:53 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
07:03:53 Check angles
07:03:53 SkyScan query
07:03:53 SkyScan query done: ret=0  az=112.995<-7533  ze=4.095<-11727  Statuses=0008 0009
07:03:53 Msec=5250  True Az=112.995  Ze=4.095  Az status=0008  Ze status=0009
07:03:54 Check angles
07:03:54 SkyScan query
07:03:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:03:54 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:03:54 Message to Master queued w/err=0: serial=348035 error=0
07:03:59 Received message from Master: op=Filter serial=348036
07:03:59 Color wheel filter change from 0 to 0
07:03:59 FLIGetFilterPos err=0  currentPosition=0
07:03:59 FLIGetStepsRemaining err=0  RemainingSteps=0
07:03:59 Filter is already there-color wheel unchanged
07:03:59 Received message from Master: op=Shutter serial=348037
07:03:59 Shutter LASER close
07:04:00 Received message from Camera: op=State serial=348039
07:04:00 GetSingleValue result=40  Value=cccccccc
07:04:00 SkyScan query
07:04:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:04:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:04:00 Parameters OK
07:04:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:04:00 Set A/D data flow result=40
07:04:00 Set A/D channel type result=40
07:04:00 Set A/D encoding result=40
07:04:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:04:00 Set channel filter=0.000000e+000  result=40
07:04:00 Config A/D  Result=40
07:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:04:00 Get A/D filter: -9.255963e+061  result=40
07:04:00 Get A/D value=-858993460  result=40
07:04:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:04:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:04:00 Parameters OK
07:04:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:04:00 Set A/D data flow result=40
07:04:00 Set A/D channel type result=40
07:04:00 Set A/D encoding result=40
07:04:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:04:00 Set channel filter=0.000000e+000  result=40
07:04:00 Config A/D  Result=40
07:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:04:00 Get A/D filter: -9.255963e+061  result=40
07:04:00 Get A/D value=-858993460  result=40
07:04:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:04:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:04:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:04:00 Aux=
07:04:00 Message to Camera, serial 348039 queued
07:04:37 Received message from Master: op=PointingHead serial=348052
07:04:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:04:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:04:37 Point started: ret=0
07:04:37 point_skyscan result=0
07:04:38 Check angles
07:04:38 SkyScan query
07:04:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:04:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:04:39 Message to Master queued w/err=0: serial=348052 error=0
07:04:44 Received message from Master: op=Filter serial=348053
07:04:44 Color wheel filter change from 0 to 0
07:04:44 FLIGetFilterPos err=0  currentPosition=0
07:04:44 FLIGetStepsRemaining err=0  RemainingSteps=0
07:04:44 Filter is already there-color wheel unchanged
07:04:44 Received message from Master: op=Shutter serial=348054
07:04:44 Shutter LASER close
07:04:44 Received message from Camera: op=State serial=348056
07:04:44 GetSingleValue result=40  Value=cccccccc
07:04:44 SkyScan query
07:04:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:04:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:04:44 Parameters OK
07:04:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:04:44 Set A/D data flow result=40
07:04:44 Set A/D channel type result=40
07:04:44 Set A/D encoding result=40
07:04:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:04:44 Set channel filter=0.000000e+000  result=40
07:04:44 Config A/D  Result=40
07:04:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:04:44 Get A/D filter: -9.255963e+061  result=40
07:04:44 Get A/D value=-858993460  result=40
07:04:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:04:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:04:44 Parameters OK
07:04:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:04:44 Set A/D data flow result=40
07:04:44 Set A/D channel type result=40
07:04:44 Set A/D encoding result=40
07:04:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:04:44 Set channel filter=0.000000e+000  result=40
07:04:44 Config A/D  Result=40
07:04:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:04:44 Get A/D filter: -9.255963e+061  result=40
07:04:44 Get A/D value=-858993460  result=40
07:04:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:04:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:04:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:04:44 Aux=
07:04:44 Message to Camera, serial 348056 queued
07:05:21 Received message from Master: op=PointingHead serial=348069
07:05:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:05:21 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:05:22 Point started: ret=0
07:05:22 point_skyscan result=0
07:05:22 Check angles
07:05:22 SkyScan query
07:05:23 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.51<-12434  Statuses=0009 0008
07:05:23 Msec=0  True Az=135.9  Ze=-6.51  Az status=0009  Ze status=0008
07:05:23 Check angles
07:05:23 SkyScan query
07:05:24 SkyScan query done: ret=0  az=153.465<-10231  ze=-6.495<-12433  Statuses=0009 0008
07:05:24 Msec=750  True Az=153.465  Ze=-6.495  Az status=0009  Ze status=0008
07:05:24 Check angles
07:05:24 SkyScan query
07:05:24 SkyScan query done: ret=0  az=171.225<-11415  ze=-6.495<-12433  Statuses=0009 0008
07:05:24 Msec=1500  True Az=171.225  Ze=-6.495  Az status=0009  Ze status=0008
07:05:25 Check angles
07:05:25 SkyScan query
07:05:25 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:05:25 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:05:25 Message to Master queued w/err=0: serial=348069 error=0
07:05:30 Received message from Master: op=Filter serial=348070
07:05:30 Color wheel filter change from 0 to 0
07:05:30 FLIGetFilterPos err=0  currentPosition=0
07:05:30 FLIGetStepsRemaining err=0  RemainingSteps=0
07:05:30 Filter is already there-color wheel unchanged
07:05:30 Received message from Master: op=Shutter serial=348071
07:05:30 Shutter LASER close
07:05:30 Received message from Camera: op=State serial=348073
07:05:30 GetSingleValue result=40  Value=cccccccc
07:05:30 SkyScan query
07:05:31 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:05:31 Parameters OK
07:05:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:05:31 Set A/D data flow result=40
07:05:31 Set A/D channel type result=40
07:05:31 Set A/D encoding result=40
07:05:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:05:31 Set channel filter=0.000000e+000  result=40
07:05:31 Config A/D  Result=40
07:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:05:31 Get A/D filter: -9.255963e+061  result=40
07:05:31 Get A/D value=-858993460  result=40
07:05:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:05:31 Parameters OK
07:05:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:05:31 Set A/D data flow result=40
07:05:31 Set A/D channel type result=40
07:05:31 Set A/D encoding result=40
07:05:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:05:31 Set channel filter=0.000000e+000  result=40
07:05:31 Config A/D  Result=40
07:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:05:31 Get A/D filter: -9.255963e+061  result=40
07:05:31 Get A/D value=-858993460  result=40
07:05:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:05:31 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:05:31 Aux=
07:05:31 Message to Camera, serial 348073 queued
07:06:08 Received message from Master: op=PointingHead serial=348086
07:06:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:06:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:06:08 Point started: ret=0
07:06:08 point_skyscan result=0
07:06:09 Check angles
07:06:09 SkyScan query
07:06:09 SkyScan query done: ret=0  az=152.97<-10198  ze=6.51<-11566  Statuses=0009 0008
07:06:09 Msec=0  True Az=152.97  Ze=6.51  Az status=0009  Ze status=0008
07:06:10 Check angles
07:06:10 SkyScan query
07:06:10 SkyScan query done: ret=0  az=135.57<-9038  ze=6.495<-11567  Statuses=0009 0008
07:06:10 Msec=750  True Az=135.57  Ze=6.495  Az status=0009  Ze status=0008
07:06:10 Check angles
07:06:10 SkyScan query
07:06:11 SkyScan query done: ret=0  az=118.125<-7875  ze=6.495<-11567  Statuses=0009 0008
07:06:11 Msec=1500  True Az=118.125  Ze=6.495  Az status=0009  Ze status=0008
07:06:11 Check angles
07:06:11 SkyScan query
07:06:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:06:12 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:06:12 Message to Master queued w/err=0: serial=348086 error=0
07:06:17 Received message from Master: op=Filter serial=348087
07:06:17 Color wheel filter change from 0 to 0
07:06:17 FLIGetFilterPos err=0  currentPosition=0
07:06:17 FLIGetStepsRemaining err=0  RemainingSteps=0
07:06:17 Filter is already there-color wheel unchanged
07:06:17 Received message from Master: op=Shutter serial=348088
07:06:17 Shutter LASER close
07:06:17 Received message from Camera: op=State serial=348090
07:06:17 GetSingleValue result=40  Value=cccccccc
07:06:17 SkyScan query
07:06:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:06:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:06:18 Parameters OK
07:06:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:06:18 Set A/D data flow result=40
07:06:18 Set A/D channel type result=40
07:06:18 Set A/D encoding result=40
07:06:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:06:18 Set channel filter=0.000000e+000  result=40
07:06:18 Config A/D  Result=40
07:06:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:06:18 Get A/D filter: -9.255963e+061  result=40
07:06:18 Get A/D value=-858993460  result=40
07:06:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:06:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:06:18 Parameters OK
07:06:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:06:18 Set A/D data flow result=40
07:06:18 Set A/D channel type result=40
07:06:18 Set A/D encoding result=40
07:06:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:06:18 Set channel filter=0.000000e+000  result=40
07:06:18 Config A/D  Result=40
07:06:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:06:18 Get A/D filter: -9.255963e+061  result=40
07:06:18 Get A/D value=-858993460  result=40
07:06:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:06:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:06:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:06:18 Aux=
07:06:18 Message to Camera, serial 348090 queued
07:06:54 Received message from Master: op=PointingHead serial=348103
07:06:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:06:54 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:06:55 Point started: ret=0
07:06:55 point_skyscan result=0
07:06:56 Check angles
07:06:56 SkyScan query
07:06:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
07:06:56 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
07:06:56 Check angles
07:06:56 SkyScan query
07:06:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.805<-14987  Statuses=0008 0009
07:06:57 Msec=750  True Az=112.995  Ze=-44.805  Az status=0008  Ze status=0009
07:06:57 Check angles
07:06:57 SkyScan query
07:06:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.195<-16413  Statuses=0008 0009
07:06:58 Msec=1500  True Az=112.995  Ze=-66.195  Az status=0008  Ze status=0009
07:06:58 Check angles
07:06:58 SkyScan query
07:06:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.15<-17810  Statuses=0008 0009
07:06:58 Msec=2250  True Az=112.995  Ze=-87.15  Az status=0008  Ze status=0009
07:06:59 Check angles
07:06:59 SkyScan query
07:06:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.12<-19208  Statuses=0008 0009
07:06:59 Msec=3000  True Az=112.995  Ze=-108.12  Az status=0008  Ze status=0009
07:06:59 Check angles
07:06:59 SkyScan query
07:07:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.06<-20604  Statuses=0008 0009
07:07:00 Msec=3750  True Az=112.995  Ze=-129.06  Az status=0008  Ze status=0009
07:07:00 Check angles
07:07:00 SkyScan query
07:07:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.015<-22001  Statuses=0008 0009
07:07:01 Msec=4500  True Az=112.995  Ze=-150.015  Az status=0008  Ze status=0009
07:07:01 Check angles
07:07:01 SkyScan query
07:07:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.21<-23414  Statuses=0008 0009
07:07:01 Msec=5250  True Az=112.995  Ze=-171.21  Az status=0008  Ze status=0009
07:07:02 Check angles
07:07:02 SkyScan query
07:07:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:07:02 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:07:02 Message to Master queued w/err=0: serial=348103 error=0
07:07:07 Received message from Master: op=Filter serial=348104
07:07:07 Color wheel filter change from 0 to 0
07:07:07 FLIGetFilterPos err=0  currentPosition=0
07:07:07 FLIGetStepsRemaining err=0  RemainingSteps=0
07:07:07 Filter is already there-color wheel unchanged
07:07:07 Received message from Master: op=Shutter serial=348105
07:07:07 Shutter LASER open
07:07:08 Received message from Camera: op=State serial=348107
07:07:08 GetSingleValue result=40  Value=cccccccc
07:07:08 SkyScan query
07:07:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:07:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:07:08 Parameters OK
07:07:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:07:08 Set A/D data flow result=40
07:07:08 Set A/D channel type result=40
07:07:08 Set A/D encoding result=40
07:07:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:07:08 Set channel filter=0.000000e+000  result=40
07:07:08 Config A/D  Result=40
07:07:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:07:08 Get A/D filter: -9.255963e+061  result=40
07:07:08 Get A/D value=-858993460  result=40
07:07:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:07:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:07:08 Parameters OK
07:07:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:07:08 Set A/D data flow result=40
07:07:08 Set A/D channel type result=40
07:07:08 Set A/D encoding result=40
07:07:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:07:08 Set channel filter=0.000000e+000  result=40
07:07:08 Config A/D  Result=40
07:07:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:07:08 Get A/D filter: -9.255963e+061  result=40
07:07:08 Get A/D value=-858993460  result=40
07:07:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:07:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:07:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:07:08 Aux=
07:07:08 Message to Camera, serial 348107 queued
07:07:17 Received message from Master: op=Shutter serial=348117
07:07:17 Shutter LASER close
07:07:17 Received message from Master: op=PointingHead serial=348121
07:07:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:07:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:07:17 Point started: ret=0
07:07:17 point_skyscan result=0
07:07:18 Check angles
07:07:18 SkyScan query
07:07:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.725<-21515  Statuses=0008 0009
07:07:19 Msec=0  True Az=112.995  Ze=-142.725  Az status=0008  Ze status=0009
07:07:19 Check angles
07:07:19 SkyScan query
07:07:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.77<-20118  Statuses=0008 0009
07:07:19 Msec=750  True Az=112.995  Ze=-121.77  Az status=0008  Ze status=0009
07:07:20 Check angles
07:07:20 SkyScan query
07:07:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.83<-18722  Statuses=0008 0009
07:07:20 Msec=1500  True Az=112.995  Ze=-100.83  Az status=0008  Ze status=0009
07:07:20 Check angles
07:07:20 SkyScan query
07:07:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.875<-17325  Statuses=0008 0009
07:07:21 Msec=2250  True Az=112.995  Ze=-79.875  Az status=0008  Ze status=0009
07:07:21 Check angles
07:07:21 SkyScan query
07:07:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.935<-15929  Statuses=0008 0009
07:07:22 Msec=3000  True Az=112.995  Ze=-58.935  Az status=0008  Ze status=0009
07:07:22 Check angles
07:07:22 SkyScan query
07:07:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.95<-14530  Statuses=0008 0009
07:07:22 Msec=3750  True Az=112.995  Ze=-37.95  Az status=0008  Ze status=0009
07:07:23 Check angles
07:07:23 SkyScan query
07:07:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.995<-13133  Statuses=0008 0009
07:07:23 Msec=4500  True Az=112.995  Ze=-16.995  Az status=0008  Ze status=0009
07:07:23 Check angles
07:07:23 SkyScan query
07:07:24 SkyScan query done: ret=0  az=112.995<-7533  ze=3.96<-11736  Statuses=0008 0009
07:07:24 Msec=5250  True Az=112.995  Ze=3.96  Az status=0008  Ze status=0009
07:07:24 Check angles
07:07:24 SkyScan query
07:07:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:07:25 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:07:25 Message to Master queued w/err=0: serial=348121 error=0
07:07:30 Received message from Master: op=Filter serial=348122
07:07:30 Color wheel filter change from 0 to 0
07:07:30 FLIGetFilterPos err=0  currentPosition=0
07:07:30 FLIGetStepsRemaining err=0  RemainingSteps=0
07:07:30 Filter is already there-color wheel unchanged
07:07:30 Received message from Master: op=Shutter serial=348123
07:07:30 Shutter LASER close
07:07:30 Received message from Camera: op=State serial=348125
07:07:30 GetSingleValue result=40  Value=cccccccc
07:07:30 SkyScan query
07:07:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:07:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:07:31 Parameters OK
07:07:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:07:31 Set A/D data flow result=40
07:07:31 Set A/D channel type result=40
07:07:31 Set A/D encoding result=40
07:07:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:07:31 Set channel filter=0.000000e+000  result=40
07:07:31 Config A/D  Result=40
07:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:07:31 Get A/D filter: -9.255963e+061  result=40
07:07:31 Get A/D value=-858993460  result=40
07:07:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:07:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:07:31 Parameters OK
07:07:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:07:31 Set A/D data flow result=40
07:07:31 Set A/D channel type result=40
07:07:31 Set A/D encoding result=40
07:07:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:07:31 Set channel filter=0.000000e+000  result=40
07:07:31 Config A/D  Result=40
07:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:07:31 Get A/D filter: -9.255963e+061  result=40
07:07:31 Get A/D value=-858993460  result=40
07:07:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:07:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:07:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:07:31 Aux=
07:07:31 Message to Camera, serial 348125 queued
07:08:07 Received message from Master: op=PointingHead serial=348138
07:08:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:08:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:08:08 Point started: ret=0
07:08:08 point_skyscan result=0
07:08:09 Check angles
07:08:09 SkyScan query
07:08:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:08:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:08:09 Message to Master queued w/err=0: serial=348138 error=0
07:08:14 Received message from Master: op=Filter serial=348139
07:08:14 Color wheel filter change from 0 to 0
07:08:14 FLIGetFilterPos err=0  currentPosition=0
07:08:14 FLIGetStepsRemaining err=0  RemainingSteps=0
07:08:14 Filter is already there-color wheel unchanged
07:08:14 Received message from Master: op=Shutter serial=348140
07:08:14 Shutter LASER close
07:08:14 Received message from Camera: op=State serial=348142
07:08:14 GetSingleValue result=40  Value=cccccccc
07:08:14 SkyScan query
07:08:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:08:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:08:15 Parameters OK
07:08:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:08:15 Set A/D data flow result=40
07:08:15 Set A/D channel type result=40
07:08:15 Set A/D encoding result=40
07:08:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:08:15 Set channel filter=0.000000e+000  result=40
07:08:15 Config A/D  Result=40
07:08:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:08:15 Get A/D filter: -9.255963e+061  result=40
07:08:15 Get A/D value=-858993460  result=40
07:08:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:08:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:08:15 Parameters OK
07:08:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:08:15 Set A/D data flow result=40
07:08:15 Set A/D channel type result=40
07:08:15 Set A/D encoding result=40
07:08:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:08:15 Set channel filter=0.000000e+000  result=40
07:08:15 Config A/D  Result=40
07:08:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:08:15 Get A/D filter: -9.255963e+061  result=40
07:08:15 Get A/D value=-858993460  result=40
07:08:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:08:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:08:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:08:15 Aux=
07:08:15 Message to Camera, serial 348142 queued
07:08:52 Received message from Master: op=PointingHead serial=348155
07:08:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:08:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:08:52 Point started: ret=0
07:08:52 point_skyscan result=0
07:08:53 Check angles
07:08:53 SkyScan query
07:08:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:08:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:08:53 Message to Master queued w/err=0: serial=348155 error=0
07:08:58 Received message from Master: op=Filter serial=348156
07:08:58 Color wheel filter change from 0 to 0
07:08:58 FLIGetFilterPos err=0  currentPosition=0
07:08:58 FLIGetStepsRemaining err=0  RemainingSteps=0
07:08:58 Filter is already there-color wheel unchanged
07:08:59 Received message from Master: op=Shutter serial=348157
07:08:59 Shutter LASER close
07:08:59 Received message from Camera: op=State serial=348159
07:08:59 GetSingleValue result=40  Value=cccccccc
07:08:59 SkyScan query
07:08:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:08:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:08:59 Parameters OK
07:08:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:08:59 Set A/D data flow result=40
07:08:59 Set A/D channel type result=40
07:08:59 Set A/D encoding result=40
07:08:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:08:59 Set channel filter=0.000000e+000  result=40
07:08:59 Config A/D  Result=40
07:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:08:59 Get A/D filter: -9.255963e+061  result=40
07:08:59 Get A/D value=-858993460  result=40
07:08:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:08:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:08:59 Parameters OK
07:08:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:08:59 Set A/D data flow result=40
07:08:59 Set A/D channel type result=40
07:08:59 Set A/D encoding result=40
07:08:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:08:59 Set channel filter=0.000000e+000  result=40
07:08:59 Config A/D  Result=40
07:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:08:59 Get A/D filter: -9.255963e+061  result=40
07:08:59 Get A/D value=-858993460  result=40
07:08:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:08:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:08:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:08:59 Aux=
07:08:59 Message to Camera, serial 348159 queued
07:09:36 Received message from Master: op=PointingHead serial=348172
07:09:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:09:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:09:36 Point started: ret=0
07:09:36 point_skyscan result=0
07:09:37 Check angles
07:09:37 SkyScan query
07:09:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:09:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:09:38 Message to Master queued w/err=0: serial=348172 error=0
07:09:43 Received message from Master: op=Filter serial=348173
07:09:43 Color wheel filter change from 0 to 0
07:09:43 FLIGetFilterPos err=0  currentPosition=0
07:09:43 FLIGetStepsRemaining err=0  RemainingSteps=0
07:09:43 Filter is already there-color wheel unchanged
07:09:43 Received message from Master: op=Shutter serial=348174
07:09:43 Shutter LASER close
07:09:43 Received message from Camera: op=State serial=348176
07:09:43 GetSingleValue result=40  Value=cccccccc
07:09:43 SkyScan query
07:09:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:09:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:09:43 Parameters OK
07:09:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:09:43 Set A/D data flow result=40
07:09:43 Set A/D channel type result=40
07:09:43 Set A/D encoding result=40
07:09:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:09:43 Set channel filter=0.000000e+000  result=40
07:09:43 Config A/D  Result=40
07:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:09:43 Get A/D filter: -9.255963e+061  result=40
07:09:43 Get A/D value=-858993460  result=40
07:09:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:09:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:09:43 Parameters OK
07:09:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:09:43 Set A/D data flow result=40
07:09:43 Set A/D channel type result=40
07:09:43 Set A/D encoding result=40
07:09:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:09:43 Set channel filter=0.000000e+000  result=40
07:09:43 Config A/D  Result=40
07:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:09:43 Get A/D filter: -9.255963e+061  result=40
07:09:43 Get A/D value=-858993460  result=40
07:09:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:09:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:09:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:09:43 Aux=
07:09:43 Message to Camera, serial 348176 queued
07:10:20 Received message from Master: op=PointingHead serial=348189
07:10:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:10:20 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:10:21 Point started: ret=0
07:10:21 point_skyscan result=0
07:10:21 Check angles
07:10:21 SkyScan query
07:10:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.355<-13557  Statuses=0008 0009
07:10:22 Msec=0  True Az=112.995  Ze=-23.355  Az status=0008  Ze status=0009
07:10:22 Check angles
07:10:22 SkyScan query
07:10:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
07:10:23 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
07:10:23 Check angles
07:10:23 SkyScan query
07:10:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.7<-16380  Statuses=0008 0009
07:10:23 Msec=1500  True Az=112.995  Ze=-65.7  Az status=0008  Ze status=0009
07:10:24 Check angles
07:10:24 SkyScan query
07:10:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.64<-17776  Statuses=0008 0009
07:10:24 Msec=2250  True Az=112.995  Ze=-86.64  Az status=0008  Ze status=0009
07:10:24 Check angles
07:10:24 SkyScan query
07:10:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.595<-19173  Statuses=0008 0009
07:10:25 Msec=3000  True Az=112.995  Ze=-107.595  Az status=0008  Ze status=0009
07:10:25 Check angles
07:10:25 SkyScan query
07:10:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.985<-20599  Statuses=0008 0009
07:10:26 Msec=3750  True Az=112.995  Ze=-128.985  Az status=0008  Ze status=0009
07:10:26 Check angles
07:10:26 SkyScan query
07:10:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.94<-21996  Statuses=0008 0009
07:10:26 Msec=4500  True Az=112.995  Ze=-149.94  Az status=0008  Ze status=0009
07:10:27 Check angles
07:10:27 SkyScan query
07:10:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
07:10:27 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
07:10:27 Check angles
07:10:27 SkyScan query
07:10:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:10:28 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:10:28 Message to Master queued w/err=0: serial=348189 error=0
07:10:33 Received message from Master: op=Filter serial=348190
07:10:33 Color wheel filter change from 0 to 0
07:10:33 FLIGetFilterPos err=0  currentPosition=0
07:10:33 FLIGetStepsRemaining err=0  RemainingSteps=0
07:10:33 Filter is already there-color wheel unchanged
07:10:33 Received message from Master: op=Shutter serial=348191
07:10:33 Shutter LASER open
07:10:33 Received message from Camera: op=State serial=348193
07:10:33 GetSingleValue result=40  Value=cccccccc
07:10:33 SkyScan query
07:10:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:34 Parameters OK
07:10:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:34 Set A/D data flow result=40
07:10:34 Set A/D channel type result=40
07:10:34 Set A/D encoding result=40
07:10:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:34 Set channel filter=0.000000e+000  result=40
07:10:34 Config A/D  Result=40
07:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:34 Get A/D filter: -9.255963e+061  result=40
07:10:34 Get A/D value=-858993460  result=40
07:10:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:34 Parameters OK
07:10:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:34 Set A/D data flow result=40
07:10:34 Set A/D channel type result=40
07:10:34 Set A/D encoding result=40
07:10:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:34 Set channel filter=0.000000e+000  result=40
07:10:34 Config A/D  Result=40
07:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:34 Get A/D filter: -9.255963e+061  result=40
07:10:34 Get A/D value=-858993460  result=40
07:10:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:10:34 Aux=
07:10:34 Message to Camera, serial 348193 queued
07:10:42 Received message from Master: op=Shutter serial=348203
07:10:42 Shutter LASER close
07:10:43 Received message from Master: op=PointingHead serial=348207
07:10:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:10:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:10:43 Point started: ret=0
07:10:43 point_skyscan result=0
07:10:44 Check angles
07:10:44 SkyScan query
07:10:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.49<-21566  Statuses=0008 0009
07:10:45 Msec=0  True Az=112.995  Ze=-143.49  Az status=0008  Ze status=0009
07:10:45 Check angles
07:10:45 SkyScan query
07:10:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.55<-20170  Statuses=0008 0009
07:10:45 Msec=750  True Az=112.995  Ze=-122.55  Az status=0008  Ze status=0009
07:10:46 Check angles
07:10:46 SkyScan query
07:10:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.58<-18772  Statuses=0008 0009
07:10:46 Msec=1500  True Az=112.995  Ze=-101.58  Az status=0008  Ze status=0009
07:10:46 Check angles
07:10:46 SkyScan query
07:10:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.61<-17374  Statuses=0008 0009
07:10:47 Msec=2250  True Az=112.995  Ze=-80.61  Az status=0008  Ze status=0009
07:10:47 Check angles
07:10:47 SkyScan query
07:10:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.655<-15977  Statuses=0008 0009
07:10:48 Msec=3000  True Az=112.995  Ze=-59.655  Az status=0008  Ze status=0009
07:10:48 Check angles
07:10:48 SkyScan query
07:10:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.7<-14580  Statuses=0008 0009
07:10:48 Msec=3750  True Az=112.995  Ze=-38.7  Az status=0008  Ze status=0009
07:10:49 Check angles
07:10:49 SkyScan query
07:10:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.745<-13183  Statuses=0008 0009
07:10:49 Msec=4500  True Az=112.995  Ze=-17.745  Az status=0008  Ze status=0009
07:10:49 Check angles
07:10:49 SkyScan query
07:10:50 SkyScan query done: ret=0  az=112.995<-7533  ze=3.21<-11786  Statuses=0008 0009
07:10:50 Msec=5250  True Az=112.995  Ze=3.21  Az status=0008  Ze status=0009
07:10:50 Check angles
07:10:50 SkyScan query
07:10:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:10:51 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:10:51 Message to Master queued w/err=0: serial=348207 error=0
07:10:56 Received message from Master: op=Filter serial=348208
07:10:56 Color wheel filter change from 0 to 0
07:10:56 FLIGetFilterPos err=0  currentPosition=0
07:10:56 FLIGetStepsRemaining err=0  RemainingSteps=0
07:10:56 Filter is already there-color wheel unchanged
07:10:56 Received message from Master: op=Shutter serial=348209
07:10:56 Shutter LASER close
07:10:56 Received message from Camera: op=State serial=348211
07:10:56 GetSingleValue result=40  Value=cccccccc
07:10:56 SkyScan query
07:10:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:10:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:57 Parameters OK
07:10:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:57 Set A/D data flow result=40
07:10:57 Set A/D channel type result=40
07:10:57 Set A/D encoding result=40
07:10:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:57 Set channel filter=0.000000e+000  result=40
07:10:57 Config A/D  Result=40
07:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:57 Get A/D filter: -9.255963e+061  result=40
07:10:57 Get A/D value=-858993460  result=40
07:10:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:57 Parameters OK
07:10:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:57 Set A/D data flow result=40
07:10:57 Set A/D channel type result=40
07:10:57 Set A/D encoding result=40
07:10:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:57 Set channel filter=0.000000e+000  result=40
07:10:57 Config A/D  Result=40
07:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:57 Get A/D filter: -9.255963e+061  result=40
07:10:57 Get A/D value=-858993460  result=40
07:10:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:10:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:10:57 Aux=
07:10:57 Message to Camera, serial 348211 queued
07:11:32 Received message from Master: op=PointingHead serial=348223
07:11:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:11:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:11:33 Point started: ret=0
07:11:33 point_skyscan result=0
07:11:34 Check angles
07:11:34 SkyScan query
07:11:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:11:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:11:34 Message to Master queued w/err=0: serial=348223 error=0
07:11:39 Received message from Master: op=Filter serial=348224
07:11:39 Color wheel filter change from 0 to 0
07:11:39 FLIGetFilterPos err=0  currentPosition=0
07:11:39 FLIGetStepsRemaining err=0  RemainingSteps=0
07:11:39 Filter is already there-color wheel unchanged
07:11:39 Received message from Master: op=Shutter serial=348225
07:11:39 Shutter LASER close
07:11:39 Received message from Camera: op=State serial=348227
07:11:39 GetSingleValue result=40  Value=cccccccc
07:11:39 SkyScan query
07:11:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:11:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:11:40 Parameters OK
07:11:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:11:40 Set A/D data flow result=40
07:11:40 Set A/D channel type result=40
07:11:40 Set A/D encoding result=40
07:11:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:11:40 Set channel filter=0.000000e+000  result=40
07:11:40 Config A/D  Result=40
07:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:11:40 Get A/D filter: -9.255963e+061  result=40
07:11:40 Get A/D value=-858993460  result=40
07:11:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:11:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:11:40 Parameters OK
07:11:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:11:40 Set A/D data flow result=40
07:11:40 Set A/D channel type result=40
07:11:40 Set A/D encoding result=40
07:11:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:11:40 Set channel filter=0.000000e+000  result=40
07:11:40 Config A/D  Result=40
07:11:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:11:40 Get A/D filter: -9.255963e+061  result=40
07:11:40 Get A/D value=-858993460  result=40
07:11:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:11:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:11:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:11:40 Aux=
07:11:40 Message to Camera, serial 348227 queued
07:12:17 Received message from Master: op=PointingHead serial=348240
07:12:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:12:17 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:12:17 Point started: ret=0
07:12:17 point_skyscan result=0
07:12:18 Check angles
07:12:18 SkyScan query
07:12:18 SkyScan query done: ret=0  az=136.335<-9089  ze=-6.51<-12434  Statuses=0009 0008
07:12:18 Msec=0  True Az=136.335  Ze=-6.51  Az status=0009  Ze status=0008
07:12:19 Check angles
07:12:19 SkyScan query
07:12:19 SkyScan query done: ret=0  az=154.11<-10274  ze=-6.495<-12433  Statuses=0009 0008
07:12:19 Msec=750  True Az=154.11  Ze=-6.495  Az status=0009  Ze status=0008
07:12:19 Check angles
07:12:19 SkyScan query
07:12:20 SkyScan query done: ret=0  az=171.645<-11443  ze=-6.495<-12433  Statuses=0009 0008
07:12:20 Msec=1500  True Az=171.645  Ze=-6.495  Az status=0009  Ze status=0008
07:12:20 Check angles
07:12:20 SkyScan query
07:12:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:12:21 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:12:21 Message to Master queued w/err=0: serial=348240 error=0
07:12:26 Received message from Master: op=Filter serial=348241
07:12:26 Color wheel filter change from 0 to 0
07:12:26 FLIGetFilterPos err=0  currentPosition=0
07:12:26 FLIGetStepsRemaining err=0  RemainingSteps=0
07:12:26 Filter is already there-color wheel unchanged
07:12:26 Received message from Master: op=Shutter serial=348242
07:12:26 Shutter LASER close
07:12:26 Received message from Camera: op=State serial=348244
07:12:26 GetSingleValue result=40  Value=cccccccc
07:12:26 SkyScan query
07:12:26 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:12:26 Parameters OK
07:12:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:12:26 Set A/D data flow result=40
07:12:26 Set A/D channel type result=40
07:12:26 Set A/D encoding result=40
07:12:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:12:26 Set channel filter=0.000000e+000  result=40
07:12:26 Config A/D  Result=40
07:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:12:26 Get A/D filter: -9.255963e+061  result=40
07:12:26 Get A/D value=-858993460  result=40
07:12:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:12:26 Parameters OK
07:12:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:12:26 Set A/D data flow result=40
07:12:26 Set A/D channel type result=40
07:12:26 Set A/D encoding result=40
07:12:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:12:26 Set channel filter=0.000000e+000  result=40
07:12:26 Config A/D  Result=40
07:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:12:26 Get A/D filter: -9.255963e+061  result=40
07:12:26 Get A/D value=-858993460  result=40
07:12:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:12:26 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:12:26 Aux=
07:12:26 Message to Camera, serial 348244 queued
07:13:03 Received message from Master: op=PointingHead serial=348257
07:13:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:13:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:13:04 Point started: ret=0
07:13:04 point_skyscan result=0
07:13:04 Check angles
07:13:04 SkyScan query
07:13:05 SkyScan query done: ret=0  az=152.925<-10195  ze=6.51<-11566  Statuses=0009 0008
07:13:05 Msec=0  True Az=152.925  Ze=6.51  Az status=0009  Ze status=0008
07:13:05 Check angles
07:13:05 SkyScan query
07:13:06 SkyScan query done: ret=0  az=135.495<-9033  ze=6.495<-11567  Statuses=0009 0008
07:13:06 Msec=750  True Az=135.495  Ze=6.495  Az status=0009  Ze status=0008
07:13:06 Check angles
07:13:06 SkyScan query
07:13:06 SkyScan query done: ret=0  az=118.065<-7871  ze=6.495<-11567  Statuses=0009 0008
07:13:06 Msec=1500  True Az=118.065  Ze=6.495  Az status=0009  Ze status=0008
07:13:07 Check angles
07:13:07 SkyScan query
07:13:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:13:07 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:13:07 Message to Master queued w/err=0: serial=348257 error=0
07:13:12 Received message from Master: op=Filter serial=348258
07:13:12 Color wheel filter change from 0 to 0
07:13:12 FLIGetFilterPos err=0  currentPosition=0
07:13:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:13:12 Filter is already there-color wheel unchanged
07:13:12 Received message from Master: op=Shutter serial=348259
07:13:12 Shutter LASER close
07:13:12 Received message from Camera: op=State serial=348261
07:13:12 GetSingleValue result=40  Value=cccccccc
07:13:12 SkyScan query
07:13:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:13:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:13:13 Parameters OK
07:13:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:13:13 Set A/D data flow result=40
07:13:13 Set A/D channel type result=40
07:13:13 Set A/D encoding result=40
07:13:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:13:13 Set channel filter=0.000000e+000  result=40
07:13:13 Config A/D  Result=40
07:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:13:13 Get A/D filter: -9.255963e+061  result=40
07:13:13 Get A/D value=-858993460  result=40
07:13:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:13:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:13:13 Parameters OK
07:13:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:13:13 Set A/D data flow result=40
07:13:13 Set A/D channel type result=40
07:13:13 Set A/D encoding result=40
07:13:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:13:13 Set channel filter=0.000000e+000  result=40
07:13:13 Config A/D  Result=40
07:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:13:13 Get A/D filter: -9.255963e+061  result=40
07:13:13 Get A/D value=-858993460  result=40
07:13:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:13:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:13:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:13:13 Aux=
07:13:13 Message to Camera, serial 348261 queued
07:13:49 Received message from Master: op=PointingHead serial=348273
07:13:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:13:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:13:49 Point started: ret=0
07:13:49 point_skyscan result=0
07:13:50 Check angles
07:13:50 SkyScan query
07:13:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
07:13:50 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
07:13:51 Check angles
07:13:51 SkyScan query
07:13:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
07:13:51 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
07:13:51 Check angles
07:13:51 SkyScan query
07:13:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.07<-16338  Statuses=0008 0009
07:13:52 Msec=1500  True Az=112.995  Ze=-65.07  Az status=0008  Ze status=0009
07:13:52 Check angles
07:13:52 SkyScan query
07:13:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.04<-17736  Statuses=0008 0009
07:13:53 Msec=2250  True Az=112.995  Ze=-86.04  Az status=0008  Ze status=0009
07:13:53 Check angles
07:13:53 SkyScan query
07:13:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.98<-19132  Statuses=0008 0009
07:13:53 Msec=3000  True Az=112.995  Ze=-106.98  Az status=0008  Ze status=0009
07:13:54 Check angles
07:13:54 SkyScan query
07:13:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
07:13:54 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
07:13:54 Check angles
07:13:54 SkyScan query
07:13:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.875<-21925  Statuses=0008 0009
07:13:55 Msec=4500  True Az=112.995  Ze=-148.875  Az status=0008  Ze status=0009
07:13:55 Check angles
07:13:55 SkyScan query
07:13:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.815<-23321  Statuses=0008 0009
07:13:56 Msec=5250  True Az=112.995  Ze=-169.815  Az status=0008  Ze status=0009
07:13:56 Check angles
07:13:56 SkyScan query
07:13:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:13:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:13:56 Message to Master queued w/err=0: serial=348273 error=0
07:14:01 Received message from Master: op=Filter serial=348274
07:14:01 Color wheel filter change from 0 to 0
07:14:01 FLIGetFilterPos err=0  currentPosition=0
07:14:01 FLIGetStepsRemaining err=0  RemainingSteps=0
07:14:01 Filter is already there-color wheel unchanged
07:14:02 Received message from Master: op=Shutter serial=348275
07:14:02 Shutter LASER open
07:14:02 Received message from Camera: op=State serial=348277
07:14:02 GetSingleValue result=40  Value=cccccccc
07:14:02 SkyScan query
07:14:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:14:02 Parameters OK
07:14:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:14:02 Set A/D data flow result=40
07:14:02 Set A/D channel type result=40
07:14:02 Set A/D encoding result=40
07:14:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:14:02 Set channel filter=0.000000e+000  result=40
07:14:02 Config A/D  Result=40
07:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:14:02 Get A/D filter: -9.255963e+061  result=40
07:14:02 Get A/D value=-858993460  result=40
07:14:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:14:02 Parameters OK
07:14:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:14:02 Set A/D data flow result=40
07:14:02 Set A/D channel type result=40
07:14:02 Set A/D encoding result=40
07:14:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:14:02 Set channel filter=0.000000e+000  result=40
07:14:02 Config A/D  Result=40
07:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:14:02 Get A/D filter: -9.255963e+061  result=40
07:14:02 Get A/D value=-858993460  result=40
[UTC 2019-3-19  07:14:02]
07:14:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:14:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:14:02 Aux=
07:14:02 Message to Camera, serial 348277 queued
07:14:11 Received message from Master: op=Shutter serial=348287
07:14:11 Shutter LASER close
07:14:11 Received message from Master: op=PointingHead serial=348291
07:14:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:14:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:14:12 Point started: ret=0
07:14:12 point_skyscan result=0
07:14:12 Check angles
07:14:12 SkyScan query
07:14:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.445<-21563  Statuses=0008 0009
07:14:13 Msec=0  True Az=112.995  Ze=-143.445  Az status=0008  Ze status=0009
07:14:13 Check angles
07:14:13 SkyScan query
07:14:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.04<-20136  Statuses=0008 0009
07:14:14 Msec=750  True Az=112.995  Ze=-122.04  Az status=0008  Ze status=0009
07:14:14 Check angles
07:14:14 SkyScan query
07:14:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.1<-18740  Statuses=0008 0009
07:14:14 Msec=1500  True Az=112.995  Ze=-101.1  Az status=0008  Ze status=0009
07:14:15 Check angles
07:14:15 SkyScan query
07:14:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.16<-17344  Statuses=0008 0009
07:14:15 Msec=2250  True Az=112.995  Ze=-80.16  Az status=0008  Ze status=0009
07:14:15 Check angles
07:14:15 SkyScan query
07:14:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.22<-15948  Statuses=0008 0009
07:14:16 Msec=3000  True Az=112.995  Ze=-59.22  Az status=0008  Ze status=0009
07:14:16 Check angles
07:14:16 SkyScan query
07:14:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.205<-14547  Statuses=0008 0009
07:14:17 Msec=3750  True Az=112.995  Ze=-38.205  Az status=0008  Ze status=0009
07:14:17 Check angles
07:14:17 SkyScan query
07:14:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.28<-13152  Statuses=0008 0009
07:14:17 Msec=4500  True Az=112.995  Ze=-17.28  Az status=0008  Ze status=0009
07:14:18 Check angles
07:14:18 SkyScan query
07:14:18 SkyScan query done: ret=0  az=112.995<-7533  ze=3.69<-11754  Statuses=0008 0009
07:14:18 Msec=5250  True Az=112.995  Ze=3.69  Az status=0008  Ze status=0009
07:14:18 Check angles
07:14:18 SkyScan query
07:14:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:14:19 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:14:19 Message to Master queued w/err=0: serial=348291 error=0
07:14:24 Received message from Master: op=Filter serial=348292
07:14:24 Color wheel filter change from 0 to 0
07:14:24 FLIGetFilterPos err=0  currentPosition=0
07:14:24 FLIGetStepsRemaining err=0  RemainingSteps=0
07:14:24 Filter is already there-color wheel unchanged
07:14:24 Received message from Master: op=Shutter serial=348293
07:14:24 Shutter LASER close
07:14:24 Received message from Camera: op=State serial=348295
07:14:24 GetSingleValue result=40  Value=cccccccc
07:14:24 SkyScan query
07:14:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:14:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:14:25 Parameters OK
07:14:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:14:25 Set A/D data flow result=40
07:14:25 Set A/D channel type result=40
07:14:25 Set A/D encoding result=40
07:14:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:14:25 Set channel filter=0.000000e+000  result=40
07:14:25 Config A/D  Result=40
07:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:14:25 Get A/D filter: -9.255963e+061  result=40
07:14:25 Get A/D value=-858993460  result=40
07:14:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:14:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:14:25 Parameters OK
07:14:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:14:25 Set A/D data flow result=40
07:14:25 Set A/D channel type result=40
07:14:25 Set A/D encoding result=40
07:14:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:14:25 Set channel filter=0.000000e+000  result=40
07:14:25 Config A/D  Result=40
07:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:14:25 Get A/D filter: -9.255963e+061  result=40
07:14:25 Get A/D value=-858993460  result=40
07:14:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:14:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:14:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:14:25 Aux=
07:14:25 Message to Camera, serial 348295 queued
07:15:02 Received message from Master: op=PointingHead serial=348308
07:15:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:15:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:15:02 Point started: ret=0
07:15:02 point_skyscan result=0
07:15:03 Check angles
07:15:03 SkyScan query
07:15:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:15:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:15:03 Message to Master queued w/err=0: serial=348308 error=0
07:15:08 Received message from Master: op=Filter serial=348309
07:15:08 Color wheel filter change from 0 to 0
07:15:08 FLIGetFilterPos err=0  currentPosition=0
07:15:08 FLIGetStepsRemaining err=0  RemainingSteps=0
07:15:08 Filter is already there-color wheel unchanged
07:15:09 Received message from Master: op=Shutter serial=348310
07:15:09 Shutter LASER close
07:15:09 Received message from Camera: op=State serial=348312
07:15:09 GetSingleValue result=40  Value=cccccccc
07:15:09 SkyScan query
07:15:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:15:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:15:09 Parameters OK
07:15:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:15:09 Set A/D data flow result=40
07:15:09 Set A/D channel type result=40
07:15:09 Set A/D encoding result=40
07:15:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:15:09 Set channel filter=0.000000e+000  result=40
07:15:09 Config A/D  Result=40
07:15:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:15:09 Get A/D filter: -9.255963e+061  result=40
07:15:09 Get A/D value=-858993460  result=40
07:15:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:15:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:15:09 Parameters OK
07:15:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:15:09 Set A/D data flow result=40
07:15:09 Set A/D channel type result=40
07:15:09 Set A/D encoding result=40
07:15:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:15:09 Set channel filter=0.000000e+000  result=40
07:15:09 Config A/D  Result=40
07:15:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:15:09 Get A/D filter: -9.255963e+061  result=40
07:15:09 Get A/D value=-858993460  result=40
07:15:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:15:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:15:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:15:09 Aux=
07:15:09 Message to Camera, serial 348312 queued
07:15:46 Received message from Master: op=PointingHead serial=348325
07:15:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:15:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:15:46 Point started: ret=0
07:15:46 point_skyscan result=0
07:15:47 Check angles
07:15:47 SkyScan query
07:15:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:15:48 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:15:48 Message to Master queued w/err=0: serial=348325 error=0
07:15:53 Received message from Master: op=Filter serial=348326
07:15:53 Color wheel filter change from 0 to 0
07:15:53 FLIGetFilterPos err=0  currentPosition=0
07:15:53 FLIGetStepsRemaining err=0  RemainingSteps=0
07:15:53 Filter is already there-color wheel unchanged
07:15:53 Received message from Master: op=Shutter serial=348327
07:15:53 Shutter LASER close
07:15:53 Received message from Camera: op=State serial=348329
07:15:53 GetSingleValue result=40  Value=cccccccc
07:15:53 SkyScan query
07:15:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:15:53 Parameters OK
07:15:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:15:53 Set A/D data flow result=40
07:15:53 Set A/D channel type result=40
07:15:53 Set A/D encoding result=40
07:15:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:15:53 Set channel filter=0.000000e+000  result=40
07:15:53 Config A/D  Result=40
07:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:15:53 Get A/D filter: -9.255963e+061  result=40
07:15:53 Get A/D value=-858993460  result=40
07:15:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:15:53 Parameters OK
07:15:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:15:53 Set A/D data flow result=40
07:15:53 Set A/D channel type result=40
07:15:53 Set A/D encoding result=40
07:15:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:15:53 Set channel filter=0.000000e+000  result=40
07:15:53 Config A/D  Result=40
07:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:15:53 Get A/D filter: -9.255963e+061  result=40
07:15:53 Get A/D value=-858993460  result=40
07:15:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:15:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:15:53 Aux=
07:15:53 Message to Camera, serial 348329 queued
07:16:29 Received message from Master: op=PointingHead serial=348341
07:16:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:16:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:16:30 Point started: ret=0
07:16:30 point_skyscan result=0
07:16:31 Check angles
07:16:31 SkyScan query
07:16:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:16:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:16:31 Message to Master queued w/err=0: serial=348341 error=0
07:16:36 Received message from Master: op=Filter serial=348342
07:16:36 Color wheel filter change from 0 to 0
07:16:36 FLIGetFilterPos err=0  currentPosition=0
07:16:36 FLIGetStepsRemaining err=0  RemainingSteps=0
07:16:36 Filter is already there-color wheel unchanged
07:16:36 Received message from Master: op=Shutter serial=348343
07:16:36 Shutter LASER close
07:16:36 Received message from Camera: op=State serial=348345
07:16:36 GetSingleValue result=40  Value=cccccccc
07:16:36 SkyScan query
07:16:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:16:37 Parameters OK
07:16:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:16:37 Set A/D data flow result=40
07:16:37 Set A/D channel type result=40
07:16:37 Set A/D encoding result=40
07:16:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:16:37 Set channel filter=0.000000e+000  result=40
07:16:37 Config A/D  Result=40
07:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:16:37 Get A/D filter: -9.255963e+061  result=40
07:16:37 Get A/D value=-858993460  result=40
07:16:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:16:37 Parameters OK
07:16:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:16:37 Set A/D data flow result=40
07:16:37 Set A/D channel type result=40
07:16:37 Set A/D encoding result=40
07:16:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:16:37 Set channel filter=0.000000e+000  result=40
07:16:37 Config A/D  Result=40
07:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:16:37 Get A/D filter: -9.255963e+061  result=40
07:16:37 Get A/D value=-858993460  result=40
07:16:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:16:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:16:37 Aux=
07:16:37 Message to Camera, serial 348345 queued
07:17:13 Received message from Master: op=PointingHead serial=348357
07:17:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:17:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:17:13 Point started: ret=0
07:17:13 point_skyscan result=0
07:17:14 Check angles
07:17:14 SkyScan query
07:17:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
07:17:14 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
07:17:15 Check angles
07:17:15 SkyScan query
07:17:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.01<-14934  Statuses=0008 0009
07:17:15 Msec=750  True Az=112.995  Ze=-44.01  Az status=0008  Ze status=0009
07:17:15 Check angles
07:17:15 SkyScan query
07:17:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.965<-16331  Statuses=0008 0009
07:17:16 Msec=1500  True Az=112.995  Ze=-64.965  Az status=0008  Ze status=0009
07:17:16 Check angles
07:17:16 SkyScan query
07:17:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.92<-17728  Statuses=0008 0009
07:17:17 Msec=2250  True Az=112.995  Ze=-85.92  Az status=0008  Ze status=0009
07:17:17 Check angles
07:17:17 SkyScan query
07:17:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.86<-19124  Statuses=0008 0009
07:17:17 Msec=3000  True Az=112.995  Ze=-106.86  Az status=0008  Ze status=0009
07:17:18 Check angles
07:17:18 SkyScan query
07:17:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.83<-20522  Statuses=0008 0009
07:17:18 Msec=3750  True Az=112.995  Ze=-127.83  Az status=0008  Ze status=0009
07:17:18 Check angles
07:17:18 SkyScan query
07:17:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.785<-21919  Statuses=0008 0009
07:17:19 Msec=4500  True Az=112.995  Ze=-148.785  Az status=0008  Ze status=0009
07:17:19 Check angles
07:17:19 SkyScan query
07:17:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.725<-23315  Statuses=0008 0009
07:17:20 Msec=5250  True Az=112.995  Ze=-169.725  Az status=0008  Ze status=0009
07:17:20 Check angles
07:17:20 SkyScan query
07:17:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:17:20 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:17:20 Message to Master queued w/err=0: serial=348357 error=0
07:17:25 Received message from Master: op=Filter serial=348358
07:17:25 Color wheel filter change from 0 to 0
07:17:25 FLIGetFilterPos err=0  currentPosition=0
07:17:25 FLIGetStepsRemaining err=0  RemainingSteps=0
07:17:25 Filter is already there-color wheel unchanged
07:17:26 Received message from Master: op=Shutter serial=348359
07:17:26 Shutter LASER open
07:17:26 Received message from Camera: op=State serial=348361
07:17:26 GetSingleValue result=40  Value=cccccccc
07:17:26 SkyScan query
07:17:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:26 Parameters OK
07:17:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:26 Set A/D data flow result=40
07:17:26 Set A/D channel type result=40
07:17:26 Set A/D encoding result=40
07:17:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:26 Set channel filter=0.000000e+000  result=40
07:17:26 Config A/D  Result=40
07:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:26 Get A/D filter: -9.255963e+061  result=40
07:17:26 Get A/D value=-858993460  result=40
07:17:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:26 Parameters OK
07:17:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:26 Set A/D data flow result=40
07:17:26 Set A/D channel type result=40
07:17:26 Set A/D encoding result=40
07:17:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:26 Set channel filter=0.000000e+000  result=40
07:17:26 Config A/D  Result=40
07:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:26 Get A/D filter: -9.255963e+061  result=40
07:17:26 Get A/D value=-858993460  result=40
07:17:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:17:26 Aux=
07:17:26 Message to Camera, serial 348361 queued
07:17:35 Received message from Master: op=Shutter serial=348371
07:17:35 Shutter LASER close
07:17:35 Received message from Master: op=PointingHead serial=348375
07:17:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:17:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:17:36 Point started: ret=0
07:17:36 point_skyscan result=0
07:17:36 Check angles
07:17:36 SkyScan query
07:17:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.965<-21531  Statuses=0008 0009
07:17:37 Msec=0  True Az=112.995  Ze=-142.965  Az status=0008  Ze status=0009
07:17:37 Check angles
07:17:37 SkyScan query
07:17:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.995<-20133  Statuses=0008 0009
07:17:38 Msec=750  True Az=112.995  Ze=-121.995  Az status=0008  Ze status=0009
07:17:38 Check angles
07:17:38 SkyScan query
07:17:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.17<-18678  Statuses=0008 0009
07:17:39 Msec=1500  True Az=112.995  Ze=-100.17  Az status=0008  Ze status=0009
07:17:39 Check angles
07:17:39 SkyScan query
07:17:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
07:17:39 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
07:17:39 Check angles
07:17:39 SkyScan query
07:17:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.71<-15914  Statuses=0008 0009
07:17:40 Msec=3000  True Az=112.995  Ze=-58.71  Az status=0008  Ze status=0009
07:17:40 Check angles
07:17:40 SkyScan query
07:17:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.755<-14517  Statuses=0008 0009
07:17:41 Msec=3750  True Az=112.995  Ze=-37.755  Az status=0008  Ze status=0009
07:17:41 Check angles
07:17:41 SkyScan query
07:17:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.8<-13120  Statuses=0008 0009
07:17:42 Msec=4500  True Az=112.995  Ze=-16.8  Az status=0008  Ze status=0009
07:17:42 Check angles
07:17:42 SkyScan query
07:17:42 SkyScan query done: ret=0  az=112.995<-7533  ze=4.125<-11725  Statuses=0008 0009
07:17:42 Msec=5250  True Az=112.995  Ze=4.125  Az status=0008  Ze status=0009
07:17:42 Check angles
07:17:42 SkyScan query
07:17:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:17:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:17:43 Message to Master queued w/err=0: serial=348375 error=0
07:17:48 Received message from Master: op=Filter serial=348376
07:17:48 Color wheel filter change from 0 to 0
07:17:48 FLIGetFilterPos err=0  currentPosition=0
07:17:48 FLIGetStepsRemaining err=0  RemainingSteps=0
07:17:48 Filter is already there-color wheel unchanged
07:17:48 Received message from Master: op=Shutter serial=348377
07:17:48 Shutter LASER close
07:17:48 Received message from Camera: op=State serial=348379
07:17:48 GetSingleValue result=40  Value=cccccccc
07:17:48 SkyScan query
07:17:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:49 Parameters OK
07:17:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:49 Set A/D data flow result=40
07:17:49 Set A/D channel type result=40
07:17:49 Set A/D encoding result=40
07:17:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:49 Set channel filter=0.000000e+000  result=40
07:17:49 Config A/D  Result=40
07:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:49 Get A/D filter: -9.255963e+061  result=40
07:17:49 Get A/D value=-858993460  result=40
07:17:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:49 Parameters OK
07:17:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:49 Set A/D data flow result=40
07:17:49 Set A/D channel type result=40
07:17:49 Set A/D encoding result=40
07:17:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:49 Set channel filter=0.000000e+000  result=40
07:17:49 Config A/D  Result=40
07:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:49 Get A/D filter: -9.255963e+061  result=40
07:17:49 Get A/D value=-858993460  result=40
07:17:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:17:49 Aux=
07:17:49 Message to Camera, serial 348379 queued
07:18:26 Received message from Master: op=PointingHead serial=348392
07:18:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:18:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:18:26 Point started: ret=0
07:18:26 point_skyscan result=0
07:18:27 Check angles
07:18:27 SkyScan query
07:18:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:18:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:18:27 Message to Master queued w/err=0: serial=348392 error=0
07:18:32 Received message from Master: op=Filter serial=348393
07:18:32 Color wheel filter change from 0 to 0
07:18:32 FLIGetFilterPos err=0  currentPosition=0
07:18:32 FLIGetStepsRemaining err=0  RemainingSteps=0
07:18:32 Filter is already there-color wheel unchanged
07:18:33 Received message from Master: op=Shutter serial=348394
07:18:33 Shutter LASER close
07:18:33 Received message from Camera: op=State serial=348396
07:18:33 GetSingleValue result=40  Value=cccccccc
07:18:33 SkyScan query
07:18:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:18:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:18:33 Parameters OK
07:18:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:18:33 Set A/D data flow result=40
07:18:33 Set A/D channel type result=40
07:18:33 Set A/D encoding result=40
07:18:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:18:33 Set channel filter=0.000000e+000  result=40
07:18:33 Config A/D  Result=40
07:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:18:33 Get A/D filter: -9.255963e+061  result=40
07:18:33 Get A/D value=-858993460  result=40
07:18:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:18:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:18:33 Parameters OK
07:18:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:18:33 Set A/D data flow result=40
07:18:33 Set A/D channel type result=40
07:18:33 Set A/D encoding result=40
07:18:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:18:33 Set channel filter=0.000000e+000  result=40
07:18:33 Config A/D  Result=40
07:18:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:18:33 Get A/D filter: -9.255963e+061  result=40
07:18:33 Get A/D value=-858993460  result=40
07:18:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:18:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:18:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:18:33 Aux=
07:18:33 Message to Camera, serial 348396 queued
07:19:10 Received message from Master: op=PointingHead serial=348409
07:19:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:19:10 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:19:10 Point started: ret=0
07:19:10 point_skyscan result=0
07:19:11 Check angles
07:19:11 SkyScan query
07:19:12 SkyScan query done: ret=0  az=136.17<-9078  ze=-6.51<-12434  Statuses=0009 0008
07:19:12 Msec=0  True Az=136.17  Ze=-6.51  Az status=0009  Ze status=0008
07:19:12 Check angles
07:19:12 SkyScan query
07:19:12 SkyScan query done: ret=0  az=153.645<-10243  ze=-6.495<-12433  Statuses=0009 0008
07:19:12 Msec=750  True Az=153.645  Ze=-6.495  Az status=0009  Ze status=0008
07:19:13 Check angles
07:19:13 SkyScan query
07:19:13 SkyScan query done: ret=0  az=171.06<-11404  ze=-6.495<-12433  Statuses=0009 0008
07:19:13 Msec=1500  True Az=171.06  Ze=-6.495  Az status=0009  Ze status=0008
07:19:13 Check angles
07:19:13 SkyScan query
07:19:14 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:19:14 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:19:14 Message to Master queued w/err=0: serial=348409 error=0
07:19:19 Received message from Master: op=Filter serial=348410
07:19:19 Color wheel filter change from 0 to 0
07:19:19 FLIGetFilterPos err=0  currentPosition=0
07:19:19 FLIGetStepsRemaining err=0  RemainingSteps=0
07:19:19 Filter is already there-color wheel unchanged
07:19:19 Received message from Master: op=Shutter serial=348411
07:19:19 Shutter LASER close
07:19:19 Received message from Camera: op=State serial=348413
07:19:19 GetSingleValue result=40  Value=cccccccc
07:19:19 SkyScan query
07:19:20 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:19:20 Parameters OK
07:19:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:19:20 Set A/D data flow result=40
07:19:20 Set A/D channel type result=40
07:19:20 Set A/D encoding result=40
07:19:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:19:20 Set channel filter=0.000000e+000  result=40
07:19:20 Config A/D  Result=40
07:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:19:20 Get A/D filter: -9.255963e+061  result=40
07:19:20 Get A/D value=-858993460  result=40
07:19:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:19:20 Parameters OK
07:19:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:19:20 Set A/D data flow result=40
07:19:20 Set A/D channel type result=40
07:19:20 Set A/D encoding result=40
07:19:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:19:20 Set channel filter=0.000000e+000  result=40
07:19:20 Config A/D  Result=40
07:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:19:20 Get A/D filter: -9.255963e+061  result=40
07:19:20 Get A/D value=-858993460  result=40
07:19:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:19:20 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:19:20 Aux=
07:19:20 Message to Camera, serial 348413 queued
07:19:57 Received message from Master: op=PointingHead serial=348426
07:19:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:19:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:19:57 Point started: ret=0
07:19:57 point_skyscan result=0
07:19:58 Check angles
07:19:58 SkyScan query
07:19:58 SkyScan query done: ret=0  az=152.595<-10173  ze=6.51<-11566  Statuses=0009 0008
07:19:58 Msec=0  True Az=152.595  Ze=6.51  Az status=0009  Ze status=0008
07:19:58 Check angles
07:19:58 SkyScan query
07:19:59 SkyScan query done: ret=0  az=135.18<-9012  ze=6.495<-11567  Statuses=0009 0008
07:19:59 Msec=750  True Az=135.18  Ze=6.495  Az status=0009  Ze status=0008
07:19:59 Check angles
07:19:59 SkyScan query
07:20:00 SkyScan query done: ret=0  az=117.675<-7845  ze=6.495<-11567  Statuses=0009 0008
07:20:00 Msec=1500  True Az=117.675  Ze=6.495  Az status=0009  Ze status=0008
07:20:00 Check angles
07:20:00 SkyScan query
07:20:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:20:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:20:01 Message to Master queued w/err=0: serial=348426 error=0
07:20:06 Received message from Master: op=Filter serial=348427
07:20:06 Color wheel filter change from 0 to 0
07:20:06 FLIGetFilterPos err=0  currentPosition=0
07:20:06 FLIGetStepsRemaining err=0  RemainingSteps=0
07:20:06 Filter is already there-color wheel unchanged
07:20:06 Received message from Master: op=Shutter serial=348428
07:20:06 Shutter LASER close
07:20:06 Received message from Camera: op=State serial=348430
07:20:06 GetSingleValue result=40  Value=cccccccc
07:20:06 SkyScan query
07:20:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:20:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:06 Parameters OK
07:20:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:06 Set A/D data flow result=40
07:20:06 Set A/D channel type result=40
07:20:06 Set A/D encoding result=40
07:20:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:06 Set channel filter=0.000000e+000  result=40
07:20:06 Config A/D  Result=40
07:20:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:06 Get A/D filter: -9.255963e+061  result=40
07:20:06 Get A/D value=-858993460  result=40
07:20:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:06 Parameters OK
07:20:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:06 Set A/D data flow result=40
07:20:06 Set A/D channel type result=40
07:20:06 Set A/D encoding result=40
07:20:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:06 Set channel filter=0.000000e+000  result=40
07:20:06 Config A/D  Result=40
07:20:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:06 Get A/D filter: -9.255963e+061  result=40
07:20:06 Get A/D value=-858993460  result=40
07:20:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:20:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:20:06 Aux=
07:20:06 Message to Camera, serial 348430 queued
07:20:43 Received message from Master: op=PointingHead serial=348443
07:20:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:20:43 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:20:44 Point started: ret=0
07:20:44 point_skyscan result=0
07:20:44 Check angles
07:20:44 SkyScan query
07:20:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
07:20:45 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
07:20:45 Check angles
07:20:45 SkyScan query
07:20:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.01<-14934  Statuses=0008 0009
07:20:46 Msec=750  True Az=112.995  Ze=-44.01  Az status=0008  Ze status=0009
07:20:46 Check angles
07:20:46 SkyScan query
07:20:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.4<-16360  Statuses=0008 0009
07:20:46 Msec=1500  True Az=112.995  Ze=-65.4  Az status=0008  Ze status=0009
07:20:47 Check angles
07:20:47 SkyScan query
07:20:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.355<-17757  Statuses=0008 0009
07:20:47 Msec=2250  True Az=112.995  Ze=-86.355  Az status=0008  Ze status=0009
07:20:47 Check angles
07:20:47 SkyScan query
07:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.295<-19153  Statuses=0008 0009
07:20:48 Msec=3000  True Az=112.995  Ze=-107.295  Az status=0008  Ze status=0009
07:20:48 Check angles
07:20:48 SkyScan query
07:20:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.67<-20578  Statuses=0008 0009
07:20:49 Msec=3750  True Az=112.995  Ze=-128.67  Az status=0008  Ze status=0009
07:20:49 Check angles
07:20:49 SkyScan query
07:20:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.64<-21976  Statuses=0008 0009
07:20:49 Msec=4500  True Az=112.995  Ze=-149.64  Az status=0008  Ze status=0009
07:20:50 Check angles
07:20:50 SkyScan query
07:20:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.58<-23372  Statuses=0008 0009
07:20:50 Msec=5250  True Az=112.995  Ze=-170.58  Az status=0008  Ze status=0009
07:20:50 Check angles
07:20:50 SkyScan query
07:20:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:20:51 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:20:51 Message to Master queued w/err=0: serial=348443 error=0
07:20:56 Received message from Master: op=Filter serial=348444
07:20:56 Color wheel filter change from 0 to 0
07:20:56 FLIGetFilterPos err=0  currentPosition=0
07:20:56 FLIGetStepsRemaining err=0  RemainingSteps=0
07:20:56 Filter is already there-color wheel unchanged
07:20:56 Received message from Master: op=Shutter serial=348445
07:20:56 Shutter LASER open
07:20:56 Received message from Camera: op=State serial=348447
07:20:56 GetSingleValue result=40  Value=cccccccc
07:20:56 SkyScan query
07:20:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:57 Parameters OK
07:20:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:57 Set A/D data flow result=40
07:20:57 Set A/D channel type result=40
07:20:57 Set A/D encoding result=40
07:20:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:57 Set channel filter=0.000000e+000  result=40
07:20:57 Config A/D  Result=40
07:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:57 Get A/D filter: -9.255963e+061  result=40
07:20:57 Get A/D value=-858993460  result=40
07:20:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:57 Parameters OK
07:20:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:57 Set A/D data flow result=40
07:20:57 Set A/D channel type result=40
07:20:57 Set A/D encoding result=40
07:20:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:57 Set channel filter=0.000000e+000  result=40
07:20:57 Config A/D  Result=40
07:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:57 Get A/D filter: -9.255963e+061  result=40
07:20:57 Get A/D value=-858993460  result=40
07:20:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:20:57 Aux=
07:20:57 Message to Camera, serial 348447 queued
07:21:05 Received message from Master: op=Shutter serial=348457
07:21:05 Shutter LASER close
07:21:06 Received message from Master: op=PointingHead serial=348461
07:21:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:21:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:21:06 Point started: ret=0
07:21:06 point_skyscan result=0
07:21:07 Check angles
07:21:07 SkyScan query
07:21:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.205<-21547  Statuses=0008 0009
07:21:07 Msec=0  True Az=112.995  Ze=-143.205  Az status=0008  Ze status=0009
07:21:08 Check angles
07:21:08 SkyScan query
07:21:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.265<-20151  Statuses=0008 0009
07:21:08 Msec=750  True Az=112.995  Ze=-122.265  Az status=0008  Ze status=0009
07:21:08 Check angles
07:21:08 SkyScan query
07:21:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
07:21:09 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
07:21:09 Check angles
07:21:09 SkyScan query
07:21:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.37<-17358  Statuses=0008 0009
07:21:10 Msec=2250  True Az=112.995  Ze=-80.37  Az status=0008  Ze status=0009
07:21:10 Check angles
07:21:10 SkyScan query
07:21:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
07:21:10 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
07:21:11 Check angles
07:21:11 SkyScan query
07:21:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
07:21:11 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
07:21:11 Check angles
07:21:11 SkyScan query
07:21:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.17<-13078  Statuses=0008 0009
07:21:12 Msec=4500  True Az=112.995  Ze=-16.17  Az status=0008  Ze status=0009
07:21:12 Check angles
07:21:12 SkyScan query
07:21:13 SkyScan query done: ret=0  az=112.995<-7533  ze=4.62<-11692  Statuses=0008 0009
07:21:13 Msec=5250  True Az=112.995  Ze=4.62  Az status=0008  Ze status=0009
07:21:13 Check angles
07:21:13 SkyScan query
07:21:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:21:13 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:21:13 Message to Master queued w/err=0: serial=348461 error=0
07:21:18 Received message from Master: op=Filter serial=348462
07:21:18 Color wheel filter change from 0 to 0
07:21:18 FLIGetFilterPos err=0  currentPosition=0
07:21:18 FLIGetStepsRemaining err=0  RemainingSteps=0
07:21:18 Filter is already there-color wheel unchanged
07:21:19 Received message from Master: op=Shutter serial=348463
07:21:19 Shutter LASER close
07:21:19 Received message from Camera: op=State serial=348465
07:21:19 GetSingleValue result=40  Value=cccccccc
07:21:19 SkyScan query
07:21:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:21:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:21:19 Parameters OK
07:21:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:21:19 Set A/D data flow result=40
07:21:19 Set A/D channel type result=40
07:21:19 Set A/D encoding result=40
07:21:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:21:19 Set channel filter=0.000000e+000  result=40
07:21:19 Config A/D  Result=40
07:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:21:19 Get A/D filter: -9.255963e+061  result=40
07:21:19 Get A/D value=-858993460  result=40
07:21:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:21:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:21:19 Parameters OK
07:21:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:21:19 Set A/D data flow result=40
07:21:19 Set A/D channel type result=40
07:21:19 Set A/D encoding result=40
07:21:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:21:19 Set channel filter=0.000000e+000  result=40
07:21:19 Config A/D  Result=40
07:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:21:19 Get A/D filter: -9.255963e+061  result=40
07:21:19 Get A/D value=-858993460  result=40
07:21:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:21:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:21:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:21:19 Aux=
07:21:19 Message to Camera, serial 348465 queued
07:21:56 Received message from Master: op=PointingHead serial=348478
07:21:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:21:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:21:57 Point started: ret=0
07:21:57 point_skyscan result=0
07:21:57 Check angles
07:21:57 SkyScan query
07:21:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:21:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:21:58 Message to Master queued w/err=0: serial=348478 error=0
07:22:03 Received message from Master: op=Filter serial=348479
07:22:03 Color wheel filter change from 0 to 0
07:22:03 FLIGetFilterPos err=0  currentPosition=0
07:22:03 FLIGetStepsRemaining err=0  RemainingSteps=0
07:22:03 Filter is already there-color wheel unchanged
07:22:03 Received message from Master: op=Shutter serial=348480
07:22:03 Shutter LASER close
07:22:03 Received message from Camera: op=State serial=348482
07:22:03 GetSingleValue result=40  Value=cccccccc
07:22:03 SkyScan query
07:22:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:22:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:22:04 Parameters OK
07:22:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:22:04 Set A/D data flow result=40
07:22:04 Set A/D channel type result=40
07:22:04 Set A/D encoding result=40
07:22:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:22:04 Set channel filter=0.000000e+000  result=40
07:22:04 Config A/D  Result=40
07:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:22:04 Get A/D filter: -9.255963e+061  result=40
07:22:04 Get A/D value=-858993460  result=40
07:22:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:22:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:22:04 Parameters OK
07:22:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:22:04 Set A/D data flow result=40
07:22:04 Set A/D channel type result=40
07:22:04 Set A/D encoding result=40
07:22:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:22:04 Set channel filter=0.000000e+000  result=40
07:22:04 Config A/D  Result=40
07:22:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:22:04 Get A/D filter: -9.255963e+061  result=40
07:22:04 Get A/D value=-858993460  result=40
07:22:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:22:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:22:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:22:04 Aux=
07:22:04 Message to Camera, serial 348482 queued
07:22:41 Received message from Master: op=PointingHead serial=348495
07:22:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:22:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:22:41 Point started: ret=0
07:22:41 point_skyscan result=0
07:22:42 Check angles
07:22:42 SkyScan query
07:22:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:22:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:22:42 Message to Master queued w/err=0: serial=348495 error=0
07:22:47 Received message from Master: op=Filter serial=348496
07:22:47 Color wheel filter change from 0 to 0
07:22:47 FLIGetFilterPos err=0  currentPosition=0
07:22:47 FLIGetStepsRemaining err=0  RemainingSteps=0
07:22:47 Filter is already there-color wheel unchanged
07:22:47 Received message from Master: op=Shutter serial=348497
07:22:47 Shutter LASER close
07:22:47 Received message from Camera: op=State serial=348499
07:22:47 GetSingleValue result=40  Value=cccccccc
07:22:47 SkyScan query
07:22:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:22:48 Parameters OK
07:22:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:22:48 Set A/D data flow result=40
07:22:48 Set A/D channel type result=40
07:22:48 Set A/D encoding result=40
07:22:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:22:48 Set channel filter=0.000000e+000  result=40
07:22:48 Config A/D  Result=40
07:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:22:48 Get A/D filter: -9.255963e+061  result=40
07:22:48 Get A/D value=-858993460  result=40
07:22:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:22:48 Parameters OK
07:22:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:22:48 Set A/D data flow result=40
07:22:48 Set A/D channel type result=40
07:22:48 Set A/D encoding result=40
07:22:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:22:48 Set channel filter=0.000000e+000  result=40
07:22:48 Config A/D  Result=40
07:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:22:48 Get A/D filter: -9.255963e+061  result=40
07:22:48 Get A/D value=-858993460  result=40
07:22:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:22:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:22:48 Aux=
07:22:48 Message to Camera, serial 348499 queued
07:23:25 Received message from Master: op=PointingHead serial=348512
07:23:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:23:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:23:25 Point started: ret=0
07:23:25 point_skyscan result=0
07:23:26 Check angles
07:23:26 SkyScan query
07:23:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:23:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:23:26 Message to Master queued w/err=0: serial=348512 error=0
07:23:31 Received message from Master: op=Filter serial=348513
07:23:31 Color wheel filter change from 0 to 0
07:23:31 FLIGetFilterPos err=0  currentPosition=0
07:23:31 FLIGetStepsRemaining err=0  RemainingSteps=0
07:23:31 Filter is already there-color wheel unchanged
07:23:32 Received message from Master: op=Shutter serial=348514
07:23:32 Shutter LASER close
07:23:32 Received message from Camera: op=State serial=348516
07:23:32 GetSingleValue result=40  Value=cccccccc
07:23:32 SkyScan query
07:23:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:23:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:23:32 Parameters OK
07:23:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:23:32 Set A/D data flow result=40
07:23:32 Set A/D channel type result=40
07:23:32 Set A/D encoding result=40
07:23:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:23:32 Set channel filter=0.000000e+000  result=40
07:23:32 Config A/D  Result=40
07:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:23:32 Get A/D filter: -9.255963e+061  result=40
07:23:32 Get A/D value=-858993460  result=40
07:23:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:23:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:23:32 Parameters OK
07:23:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:23:32 Set A/D data flow result=40
07:23:32 Set A/D channel type result=40
07:23:32 Set A/D encoding result=40
07:23:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:23:32 Set channel filter=0.000000e+000  result=40
07:23:32 Config A/D  Result=40
07:23:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:23:32 Get A/D filter: -9.255963e+061  result=40
07:23:32 Get A/D value=-858993460  result=40
07:23:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:23:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:23:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:23:32 Aux=
07:23:32 Message to Camera, serial 348516 queued
[UTC 2019-3-19  07:23:48]
07:24:09 Received message from Master: op=PointingHead serial=348529
07:24:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:24:09 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:24:09 Point started: ret=0
07:24:09 point_skyscan result=0
07:24:10 Check angles
07:24:10 SkyScan query
07:24:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.73<-13582  Statuses=0008 0009
07:24:11 Msec=0  True Az=112.995  Ze=-23.73  Az status=0008  Ze status=0009
07:24:11 Check angles
07:24:11 SkyScan query
07:24:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.7<-14980  Statuses=0008 0009
07:24:12 Msec=750  True Az=112.995  Ze=-44.7  Az status=0008  Ze status=0009
07:24:12 Check angles
07:24:12 SkyScan query
07:24:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.64<-16376  Statuses=0008 0009
07:24:12 Msec=1500  True Az=112.995  Ze=-65.64  Az status=0008  Ze status=0009
07:24:12 Check angles
07:24:12 SkyScan query
07:24:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.595<-17773  Statuses=0008 0009
07:24:13 Msec=2250  True Az=112.995  Ze=-86.595  Az status=0008  Ze status=0009
07:24:13 Check angles
07:24:13 SkyScan query
07:24:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.55<-19170  Statuses=0008 0009
07:24:14 Msec=3000  True Az=112.995  Ze=-107.55  Az status=0008  Ze status=0009
07:24:14 Check angles
07:24:14 SkyScan query
07:24:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.49<-20566  Statuses=0008 0009
07:24:15 Msec=3750  True Az=112.995  Ze=-128.49  Az status=0008  Ze status=0009
07:24:15 Check angles
07:24:15 SkyScan query
07:24:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.46<-21964  Statuses=0008 0009
07:24:15 Msec=4500  True Az=112.995  Ze=-149.46  Az status=0008  Ze status=0009
07:24:15 Check angles
07:24:15 SkyScan query
07:24:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.385<-23359  Statuses=0008 0009
07:24:16 Msec=5250  True Az=112.995  Ze=-170.385  Az status=0008  Ze status=0009
07:24:16 Check angles
07:24:16 SkyScan query
07:24:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:24:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:24:17 Message to Master queued w/err=0: serial=348529 error=0
07:24:22 Received message from Master: op=Filter serial=348530
07:24:22 Color wheel filter change from 0 to 0
07:24:22 FLIGetFilterPos err=0  currentPosition=0
07:24:22 FLIGetStepsRemaining err=0  RemainingSteps=0
07:24:22 Filter is already there-color wheel unchanged
07:24:22 Received message from Master: op=Shutter serial=348531
07:24:22 Shutter LASER open
07:24:22 Received message from Camera: op=State serial=348533
07:24:22 GetSingleValue result=40  Value=cccccccc
07:24:22 SkyScan query
07:24:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:24:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:24:23 Parameters OK
07:24:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:24:23 Set A/D data flow result=40
07:24:23 Set A/D channel type result=40
07:24:23 Set A/D encoding result=40
07:24:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:24:23 Set channel filter=0.000000e+000  result=40
07:24:23 Config A/D  Result=40
07:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:24:23 Get A/D filter: -9.255963e+061  result=40
07:24:23 Get A/D value=-858993460  result=40
07:24:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:24:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:24:23 Parameters OK
07:24:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:24:23 Set A/D data flow result=40
07:24:23 Set A/D channel type result=40
07:24:23 Set A/D encoding result=40
07:24:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:24:23 Set channel filter=0.000000e+000  result=40
07:24:23 Config A/D  Result=40
07:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:24:23 Get A/D filter: -9.255963e+061  result=40
07:24:23 Get A/D value=-858993460  result=40
07:24:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:24:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:24:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:24:23 Aux=
07:24:23 Message to Camera, serial 348533 queued
07:24:31 Received message from Master: op=Shutter serial=348543
07:24:31 Shutter LASER close
07:24:32 Received message from Master: op=PointingHead serial=348547
07:24:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:24:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:24:32 Point started: ret=0
07:24:32 point_skyscan result=0
07:24:33 Check angles
07:24:33 SkyScan query
07:24:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.28<-21552  Statuses=0008 0009
07:24:33 Msec=0  True Az=112.995  Ze=-143.28  Az status=0008  Ze status=0009
07:24:34 Check angles
07:24:34 SkyScan query
07:24:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.325<-20155  Statuses=0008 0009
07:24:34 Msec=750  True Az=112.995  Ze=-122.325  Az status=0008  Ze status=0009
07:24:34 Check angles
07:24:34 SkyScan query
07:24:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.37<-18758  Statuses=0008 0009
07:24:35 Msec=1500  True Az=112.995  Ze=-101.37  Az status=0008  Ze status=0009
07:24:35 Check angles
07:24:35 SkyScan query
07:24:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.415<-17361  Statuses=0008 0009
07:24:36 Msec=2250  True Az=112.995  Ze=-80.415  Az status=0008  Ze status=0009
07:24:36 Check angles
07:24:36 SkyScan query
07:24:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.475<-15965  Statuses=0008 0009
07:24:36 Msec=3000  True Az=112.995  Ze=-59.475  Az status=0008  Ze status=0009
07:24:37 Check angles
07:24:37 SkyScan query
07:24:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.505<-14567  Statuses=0008 0009
07:24:37 Msec=3750  True Az=112.995  Ze=-38.505  Az status=0008  Ze status=0009
07:24:37 Check angles
07:24:37 SkyScan query
07:24:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.565<-13171  Statuses=0008 0009
07:24:38 Msec=4500  True Az=112.995  Ze=-17.565  Az status=0008  Ze status=0009
07:24:38 Check angles
07:24:38 SkyScan query
07:24:39 SkyScan query done: ret=0  az=112.995<-7533  ze=3.42<-11772  Statuses=0008 0009
07:24:39 Msec=5250  True Az=112.995  Ze=3.42  Az status=0008  Ze status=0009
07:24:39 Check angles
07:24:39 SkyScan query
07:24:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:24:39 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:24:39 Message to Master queued w/err=0: serial=348547 error=0
07:24:44 Received message from Master: op=Filter serial=348548
07:24:44 Color wheel filter change from 0 to 0
07:24:44 FLIGetFilterPos err=0  currentPosition=0
07:24:44 FLIGetStepsRemaining err=0  RemainingSteps=0
07:24:44 Filter is already there-color wheel unchanged
07:24:45 Received message from Master: op=Shutter serial=348549
07:24:45 Shutter LASER close
07:24:45 Received message from Camera: op=State serial=348551
07:24:45 GetSingleValue result=40  Value=cccccccc
07:24:45 SkyScan query
07:24:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:24:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:24:45 Parameters OK
07:24:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:24:45 Set A/D data flow result=40
07:24:45 Set A/D channel type result=40
07:24:45 Set A/D encoding result=40
07:24:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:24:45 Set channel filter=0.000000e+000  result=40
07:24:45 Config A/D  Result=40
07:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:24:45 Get A/D filter: -9.255963e+061  result=40
07:24:45 Get A/D value=-858993460  result=40
07:24:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:24:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:24:45 Parameters OK
07:24:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:24:45 Set A/D data flow result=40
07:24:45 Set A/D channel type result=40
07:24:45 Set A/D encoding result=40
07:24:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:24:45 Set channel filter=0.000000e+000  result=40
07:24:45 Config A/D  Result=40
07:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:24:45 Get A/D filter: -9.255963e+061  result=40
07:24:45 Get A/D value=-858993460  result=40
07:24:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:24:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:24:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:24:45 Aux=
07:24:45 Message to Camera, serial 348551 queued
07:25:22 Received message from Master: op=PointingHead serial=348564
07:25:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:25:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:25:23 Point started: ret=0
07:25:23 point_skyscan result=0
07:25:23 Check angles
07:25:23 SkyScan query
07:25:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:25:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:25:24 Message to Master queued w/err=0: serial=348564 error=0
07:25:29 Received message from Master: op=Filter serial=348565
07:25:29 Color wheel filter change from 0 to 0
07:25:29 FLIGetFilterPos err=0  currentPosition=0
07:25:29 FLIGetStepsRemaining err=0  RemainingSteps=0
07:25:29 Filter is already there-color wheel unchanged
07:25:29 Received message from Master: op=Shutter serial=348566
07:25:29 Shutter LASER close
07:25:29 Received message from Camera: op=State serial=348568
07:25:29 GetSingleValue result=40  Value=cccccccc
07:25:29 SkyScan query
07:25:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:25:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:25:30 Parameters OK
07:25:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:25:30 Set A/D data flow result=40
07:25:30 Set A/D channel type result=40
07:25:30 Set A/D encoding result=40
07:25:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:25:30 Set channel filter=0.000000e+000  result=40
07:25:30 Config A/D  Result=40
07:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:25:30 Get A/D filter: -9.255963e+061  result=40
07:25:30 Get A/D value=-858993460  result=40
07:25:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:25:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:25:30 Parameters OK
07:25:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:25:30 Set A/D data flow result=40
07:25:30 Set A/D channel type result=40
07:25:30 Set A/D encoding result=40
07:25:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:25:30 Set channel filter=0.000000e+000  result=40
07:25:30 Config A/D  Result=40
07:25:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:25:30 Get A/D filter: -9.255963e+061  result=40
07:25:30 Get A/D value=-858993460  result=40
07:25:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:25:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:25:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:25:30 Aux=
07:25:30 Message to Camera, serial 348568 queued
07:26:07 Received message from Master: op=PointingHead serial=348581
07:26:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:26:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:26:07 Point started: ret=0
07:26:07 point_skyscan result=0
07:26:08 Check angles
07:26:08 SkyScan query
07:26:08 SkyScan query done: ret=0  az=136.095<-9073  ze=-6.51<-12434  Statuses=0009 0008
07:26:08 Msec=0  True Az=136.095  Ze=-6.51  Az status=0009  Ze status=0008
07:26:08 Check angles
07:26:08 SkyScan query
07:26:09 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
07:26:09 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
07:26:09 Check angles
07:26:09 SkyScan query
07:26:10 SkyScan query done: ret=0  az=171.015<-11401  ze=-6.495<-12433  Statuses=0009 0008
07:26:10 Msec=1500  True Az=171.015  Ze=-6.495  Az status=0009  Ze status=0008
07:26:10 Check angles
07:26:10 SkyScan query
07:26:10 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:26:10 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:26:10 Message to Master queued w/err=0: serial=348581 error=0
07:26:15 Received message from Master: op=Filter serial=348582
07:26:15 Color wheel filter change from 0 to 0
07:26:15 FLIGetFilterPos err=0  currentPosition=0
07:26:15 FLIGetStepsRemaining err=0  RemainingSteps=0
07:26:15 Filter is already there-color wheel unchanged
07:26:16 Received message from Master: op=Shutter serial=348583
07:26:16 Shutter LASER close
07:26:16 Received message from Camera: op=State serial=348585
07:26:16 GetSingleValue result=40  Value=cccccccc
07:26:16 SkyScan query
07:26:16 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:26:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:26:16 Parameters OK
07:26:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:26:16 Set A/D data flow result=40
07:26:16 Set A/D channel type result=40
07:26:16 Set A/D encoding result=40
07:26:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:26:16 Set channel filter=0.000000e+000  result=40
07:26:16 Config A/D  Result=40
07:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:26:16 Get A/D filter: -9.255963e+061  result=40
07:26:16 Get A/D value=-858993460  result=40
07:26:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:26:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:26:16 Parameters OK
07:26:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:26:16 Set A/D data flow result=40
07:26:16 Set A/D channel type result=40
07:26:16 Set A/D encoding result=40
07:26:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:26:16 Set channel filter=0.000000e+000  result=40
07:26:16 Config A/D  Result=40
07:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:26:16 Get A/D filter: -9.255963e+061  result=40
07:26:16 Get A/D value=-858993460  result=40
07:26:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:26:16 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:26:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:26:16 Aux=
07:26:16 Message to Camera, serial 348585 queued
07:26:53 Received message from Master: op=PointingHead serial=348598
07:26:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:26:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:26:53 Point started: ret=0
07:26:53 point_skyscan result=0
07:26:54 Check angles
07:26:54 SkyScan query
07:26:55 SkyScan query done: ret=0  az=152.61<-10174  ze=6.51<-11566  Statuses=0009 0008
07:26:55 Msec=0  True Az=152.61  Ze=6.51  Az status=0009  Ze status=0008
07:26:55 Check angles
07:26:55 SkyScan query
07:26:56 SkyScan query done: ret=0  az=134.94<-8996  ze=6.495<-11567  Statuses=0009 0008
07:26:56 Msec=750  True Az=134.94  Ze=6.495  Az status=0009  Ze status=0008
07:26:56 Check angles
07:26:56 SkyScan query
07:26:56 SkyScan query done: ret=0  az=117.63<-7842  ze=6.495<-11567  Statuses=0009 0008
07:26:56 Msec=1500  True Az=117.63  Ze=6.495  Az status=0009  Ze status=0008
07:26:56 Check angles
07:26:56 SkyScan query
07:26:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:26:57 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:26:57 Message to Master queued w/err=0: serial=348598 error=0
07:27:02 Received message from Master: op=Filter serial=348599
07:27:02 Color wheel filter change from 0 to 0
07:27:02 FLIGetFilterPos err=0  currentPosition=0
07:27:02 FLIGetStepsRemaining err=0  RemainingSteps=0
07:27:02 Filter is already there-color wheel unchanged
07:27:02 Received message from Master: op=Shutter serial=348600
07:27:02 Shutter LASER close
07:27:02 Received message from Camera: op=State serial=348602
07:27:02 GetSingleValue result=40  Value=cccccccc
07:27:02 SkyScan query
07:27:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:27:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:03 Parameters OK
07:27:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:03 Set A/D data flow result=40
07:27:03 Set A/D channel type result=40
07:27:03 Set A/D encoding result=40
07:27:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:03 Set channel filter=0.000000e+000  result=40
07:27:03 Config A/D  Result=40
07:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:03 Get A/D filter: -9.255963e+061  result=40
07:27:03 Get A/D value=-858993460  result=40
07:27:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:03 Parameters OK
07:27:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:03 Set A/D data flow result=40
07:27:03 Set A/D channel type result=40
07:27:03 Set A/D encoding result=40
07:27:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:03 Set channel filter=0.000000e+000  result=40
07:27:03 Config A/D  Result=40
07:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:03 Get A/D filter: -9.255963e+061  result=40
07:27:03 Get A/D value=-858993460  result=40
07:27:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:27:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:27:03 Aux=
07:27:03 Message to Camera, serial 348602 queued
07:27:40 Received message from Master: op=PointingHead serial=348615
07:27:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:27:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:27:40 Point started: ret=0
07:27:40 point_skyscan result=0
07:27:41 Check angles
07:27:41 SkyScan query
07:27:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.49<-13566  Statuses=0008 0009
07:27:41 Msec=0  True Az=112.995  Ze=-23.49  Az status=0008  Ze status=0009
07:27:42 Check angles
07:27:42 SkyScan query
07:27:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
07:27:42 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
07:27:42 Check angles
07:27:42 SkyScan query
07:27:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.415<-16361  Statuses=0008 0009
07:27:43 Msec=1500  True Az=112.995  Ze=-65.415  Az status=0008  Ze status=0009
07:27:43 Check angles
07:27:43 SkyScan query
07:27:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.37<-17758  Statuses=0008 0009
07:27:44 Msec=2250  True Az=112.995  Ze=-86.37  Az status=0008  Ze status=0009
07:27:44 Check angles
07:27:44 SkyScan query
07:27:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.31<-19154  Statuses=0008 0009
07:27:44 Msec=3000  True Az=112.995  Ze=-107.31  Az status=0008  Ze status=0009
07:27:45 Check angles
07:27:45 SkyScan query
07:27:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.265<-20551  Statuses=0008 0009
07:27:45 Msec=3750  True Az=112.995  Ze=-128.265  Az status=0008  Ze status=0009
07:27:45 Check angles
07:27:45 SkyScan query
07:27:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.235<-21949  Statuses=0008 0009
07:27:46 Msec=4500  True Az=112.995  Ze=-149.235  Az status=0008  Ze status=0009
07:27:46 Check angles
07:27:46 SkyScan query
07:27:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.16<-23344  Statuses=0008 0009
07:27:47 Msec=5250  True Az=112.995  Ze=-170.16  Az status=0008  Ze status=0009
07:27:47 Check angles
07:27:47 SkyScan query
07:27:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:27:47 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:27:47 Message to Master queued w/err=0: serial=348615 error=0
07:27:52 Received message from Master: op=Filter serial=348616
07:27:52 Color wheel filter change from 0 to 0
07:27:52 FLIGetFilterPos err=0  currentPosition=0
07:27:52 FLIGetStepsRemaining err=0  RemainingSteps=0
07:27:52 Filter is already there-color wheel unchanged
07:27:53 Received message from Master: op=Shutter serial=348617
07:27:53 Shutter LASER open
07:27:53 Received message from Camera: op=State serial=348619
07:27:53 GetSingleValue result=40  Value=cccccccc
07:27:53 SkyScan query
07:27:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:27:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:53 Parameters OK
07:27:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:53 Set A/D data flow result=40
07:27:53 Set A/D channel type result=40
07:27:53 Set A/D encoding result=40
07:27:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:53 Set channel filter=0.000000e+000  result=40
07:27:53 Config A/D  Result=40
07:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:53 Get A/D filter: -9.255963e+061  result=40
07:27:53 Get A/D value=-858993460  result=40
07:27:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:53 Parameters OK
07:27:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:53 Set A/D data flow result=40
07:27:53 Set A/D channel type result=40
07:27:53 Set A/D encoding result=40
07:27:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:53 Set channel filter=0.000000e+000  result=40
07:27:53 Config A/D  Result=40
07:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:53 Get A/D filter: -9.255963e+061  result=40
07:27:53 Get A/D value=-858993460  result=40
07:27:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:27:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:27:53 Aux=
07:27:53 Message to Camera, serial 348619 queued
07:28:02 Received message from Master: op=Shutter serial=348629
07:28:02 Shutter LASER close
07:28:02 Received message from Master: op=PointingHead serial=348633
07:28:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:28:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:28:02 Point started: ret=0
07:28:02 point_skyscan result=0
07:28:03 Check angles
07:28:03 SkyScan query
07:28:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.505<-21567  Statuses=0008 0009
07:28:04 Msec=0  True Az=112.995  Ze=-143.505  Az status=0008  Ze status=0009
07:28:04 Check angles
07:28:04 SkyScan query
07:28:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.595<-20173  Statuses=0008 0009
07:28:05 Msec=750  True Az=112.995  Ze=-122.595  Az status=0008  Ze status=0009
07:28:05 Check angles
07:28:05 SkyScan query
07:28:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.55<-18770  Statuses=0008 0009
07:28:05 Msec=1500  True Az=112.995  Ze=-101.55  Az status=0008  Ze status=0009
07:28:05 Check angles
07:28:05 SkyScan query
07:28:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
07:28:06 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
07:28:06 Check angles
07:28:06 SkyScan query
07:28:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.83<-15922  Statuses=0008 0009
07:28:07 Msec=3000  True Az=112.995  Ze=-58.83  Az status=0008  Ze status=0009
07:28:07 Check angles
07:28:07 SkyScan query
07:28:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.425<-14495  Statuses=0008 0009
07:28:08 Msec=3750  True Az=112.995  Ze=-37.425  Az status=0008  Ze status=0009
07:28:08 Check angles
07:28:08 SkyScan query
07:28:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.455<-13097  Statuses=0008 0009
07:28:08 Msec=4500  True Az=112.995  Ze=-16.455  Az status=0008  Ze status=0009
07:28:09 Check angles
07:28:09 SkyScan query
07:28:09 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
07:28:09 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
07:28:09 Check angles
07:28:09 SkyScan query
07:28:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:28:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:28:10 Message to Master queued w/err=0: serial=348633 error=0
07:28:15 Received message from Master: op=Filter serial=348634
07:28:15 Color wheel filter change from 0 to 0
07:28:15 FLIGetFilterPos err=0  currentPosition=0
07:28:15 FLIGetStepsRemaining err=0  RemainingSteps=0
07:28:15 Filter is already there-color wheel unchanged
07:28:15 Received message from Master: op=Shutter serial=348635
07:28:15 Shutter LASER close
07:28:15 Received message from Camera: op=State serial=348637
07:28:15 GetSingleValue result=40  Value=cccccccc
07:28:15 SkyScan query
07:28:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:28:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:28:16 Parameters OK
07:28:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:28:16 Set A/D data flow result=40
07:28:16 Set A/D channel type result=40
07:28:16 Set A/D encoding result=40
07:28:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:28:16 Set channel filter=0.000000e+000  result=40
07:28:16 Config A/D  Result=40
07:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:28:16 Get A/D filter: -9.255963e+061  result=40
07:28:16 Get A/D value=-858993460  result=40
07:28:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:28:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:28:16 Parameters OK
07:28:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:28:16 Set A/D data flow result=40
07:28:16 Set A/D channel type result=40
07:28:16 Set A/D encoding result=40
07:28:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:28:16 Set channel filter=0.000000e+000  result=40
07:28:16 Config A/D  Result=40
07:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:28:16 Get A/D filter: -9.255963e+061  result=40
07:28:16 Get A/D value=-858993460  result=40
07:28:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:28:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:28:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:28:16 Aux=
07:28:16 Message to Camera, serial 348637 queued
07:28:53 Received message from Master: op=PointingHead serial=348650
07:28:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:28:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:28:53 Point started: ret=0
07:28:53 point_skyscan result=0
07:28:54 Check angles
07:28:54 SkyScan query
07:28:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:28:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:28:54 Message to Master queued w/err=0: serial=348650 error=0
07:28:59 Received message from Master: op=Filter serial=348651
07:28:59 Color wheel filter change from 0 to 0
07:28:59 FLIGetFilterPos err=0  currentPosition=0
07:28:59 FLIGetStepsRemaining err=0  RemainingSteps=0
07:28:59 Filter is already there-color wheel unchanged
07:28:59 Received message from Master: op=Shutter serial=348652
07:28:59 Shutter LASER close
07:28:59 Received message from Camera: op=State serial=348654
07:28:59 GetSingleValue result=40  Value=cccccccc
07:28:59 SkyScan query
07:29:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:29:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:29:00 Parameters OK
07:29:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:29:00 Set A/D data flow result=40
07:29:00 Set A/D channel type result=40
07:29:00 Set A/D encoding result=40
07:29:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:29:00 Set channel filter=0.000000e+000  result=40
07:29:00 Config A/D  Result=40
07:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:29:00 Get A/D filter: -9.255963e+061  result=40
07:29:00 Get A/D value=-858993460  result=40
07:29:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:29:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:29:00 Parameters OK
07:29:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:29:00 Set A/D data flow result=40
07:29:00 Set A/D channel type result=40
07:29:00 Set A/D encoding result=40
07:29:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:29:00 Set channel filter=0.000000e+000  result=40
07:29:00 Config A/D  Result=40
07:29:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:29:00 Get A/D filter: -9.255963e+061  result=40
07:29:00 Get A/D value=-858993460  result=40
07:29:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:29:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:29:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:29:00 Aux=
07:29:00 Message to Camera, serial 348654 queued
07:29:37 Received message from Master: op=PointingHead serial=348667
07:29:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:29:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:29:37 Point started: ret=0
07:29:37 point_skyscan result=0
07:29:38 Check angles
07:29:38 SkyScan query
07:29:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:29:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:29:39 Message to Master queued w/err=0: serial=348667 error=0
07:29:44 Received message from Master: op=Filter serial=348668
07:29:44 Color wheel filter change from 0 to 0
07:29:44 FLIGetFilterPos err=0  currentPosition=0
07:29:44 FLIGetStepsRemaining err=0  RemainingSteps=0
07:29:44 Filter is already there-color wheel unchanged
07:29:44 Received message from Master: op=Shutter serial=348669
07:29:44 Shutter LASER close
07:29:44 Received message from Camera: op=State serial=348671
07:29:44 GetSingleValue result=40  Value=cccccccc
07:29:44 SkyScan query
07:29:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:29:44 Parameters OK
07:29:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:29:44 Set A/D data flow result=40
07:29:44 Set A/D channel type result=40
07:29:44 Set A/D encoding result=40
07:29:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:29:44 Set channel filter=0.000000e+000  result=40
07:29:44 Config A/D  Result=40
07:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:29:44 Get A/D filter: -9.255963e+061  result=40
07:29:44 Get A/D value=-858993460  result=40
07:29:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:29:44 Parameters OK
07:29:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:29:44 Set A/D data flow result=40
07:29:44 Set A/D channel type result=40
07:29:44 Set A/D encoding result=40
07:29:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:29:44 Set channel filter=0.000000e+000  result=40
07:29:44 Config A/D  Result=40
07:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:29:44 Get A/D filter: -9.255963e+061  result=40
07:29:44 Get A/D value=-858993460  result=40
07:29:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:29:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:29:44 Aux=
07:29:44 Message to Camera, serial 348671 queued
07:30:21 Received message from Master: op=PointingHead serial=348684
07:30:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:30:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:30:22 Point started: ret=0
07:30:22 point_skyscan result=0
07:30:22 Check angles
07:30:22 SkyScan query
07:30:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:30:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:30:23 Message to Master queued w/err=0: serial=348684 error=0
07:30:28 Received message from Master: op=Filter serial=348685
07:30:28 Color wheel filter change from 0 to 0
07:30:28 FLIGetFilterPos err=0  currentPosition=0
07:30:28 FLIGetStepsRemaining err=0  RemainingSteps=0
07:30:28 Filter is already there-color wheel unchanged
07:30:28 Received message from Master: op=Shutter serial=348686
07:30:28 Shutter LASER close
07:30:28 Received message from Camera: op=State serial=348688
07:30:28 GetSingleValue result=40  Value=cccccccc
07:30:28 SkyScan query
07:30:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:30:29 Parameters OK
07:30:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:30:29 Set A/D data flow result=40
07:30:29 Set A/D channel type result=40
07:30:29 Set A/D encoding result=40
07:30:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:30:29 Set channel filter=0.000000e+000  result=40
07:30:29 Config A/D  Result=40
07:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:30:29 Get A/D filter: -9.255963e+061  result=40
07:30:29 Get A/D value=-858993460  result=40
07:30:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:30:29 Parameters OK
07:30:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:30:29 Set A/D data flow result=40
07:30:29 Set A/D channel type result=40
07:30:29 Set A/D encoding result=40
07:30:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:30:29 Set channel filter=0.000000e+000  result=40
07:30:29 Config A/D  Result=40
07:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:30:29 Get A/D filter: -9.255963e+061  result=40
07:30:29 Get A/D value=-858993460  result=40
07:30:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:30:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:30:29 Aux=
07:30:29 Message to Camera, serial 348688 queued
07:31:06 Received message from Master: op=PointingHead serial=348701
07:31:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:31:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:31:06 Point started: ret=0
07:31:06 point_skyscan result=0
07:31:07 Check angles
07:31:07 SkyScan query
07:31:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
07:31:07 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
07:31:07 Check angles
07:31:07 SkyScan query
07:31:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.37<-14958  Statuses=0008 0009
07:31:08 Msec=750  True Az=112.995  Ze=-44.37  Az status=0008  Ze status=0009
07:31:08 Check angles
07:31:08 SkyScan query
07:31:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
07:31:09 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
07:31:09 Check angles
07:31:09 SkyScan query
07:31:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
07:31:09 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
07:31:10 Check angles
07:31:10 SkyScan query
07:31:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.655<-19177  Statuses=0008 0009
07:31:10 Msec=3000  True Az=112.995  Ze=-107.655  Az status=0008  Ze status=0009
07:31:10 Check angles
07:31:10 SkyScan query
07:31:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.595<-20573  Statuses=0008 0009
07:31:11 Msec=3750  True Az=112.995  Ze=-128.595  Az status=0008  Ze status=0009
07:31:11 Check angles
07:31:11 SkyScan query
07:31:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-150<-22000  Statuses=0008 0009
07:31:12 Msec=4500  True Az=112.995  Ze=-150  Az status=0008  Ze status=0009
07:31:12 Check angles
07:31:12 SkyScan query
07:31:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.85<-23390  Statuses=0008 0009
07:31:12 Msec=5250  True Az=112.995  Ze=-170.85  Az status=0008  Ze status=0009
07:31:13 Check angles
07:31:13 SkyScan query
07:31:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:31:13 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:31:13 Message to Master queued w/err=0: serial=348701 error=0
07:31:18 Received message from Master: op=Filter serial=348702
07:31:18 Color wheel filter change from 0 to 0
07:31:18 FLIGetFilterPos err=0  currentPosition=0
07:31:18 FLIGetStepsRemaining err=0  RemainingSteps=0
07:31:18 Filter is already there-color wheel unchanged
07:31:18 Received message from Master: op=Shutter serial=348703
07:31:18 Shutter LASER open
07:31:19 Received message from Camera: op=State serial=348705
07:31:19 GetSingleValue result=40  Value=cccccccc
07:31:19 SkyScan query
07:31:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:31:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:31:19 Parameters OK
07:31:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:31:19 Set A/D data flow result=40
07:31:19 Set A/D channel type result=40
07:31:19 Set A/D encoding result=40
07:31:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:31:19 Set channel filter=0.000000e+000  result=40
07:31:19 Config A/D  Result=40
07:31:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:31:19 Get A/D filter: -9.255963e+061  result=40
07:31:19 Get A/D value=-858993460  result=40
07:31:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:31:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:31:19 Parameters OK
07:31:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:31:19 Set A/D data flow result=40
07:31:19 Set A/D channel type result=40
07:31:19 Set A/D encoding result=40
07:31:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:31:19 Set channel filter=0.000000e+000  result=40
07:31:19 Config A/D  Result=40
07:31:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:31:19 Get A/D filter: -9.255963e+061  result=40
07:31:19 Get A/D value=-858993460  result=40
07:31:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:31:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:31:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:31:19 Aux=
07:31:19 Message to Camera, serial 348705 queued
07:31:28 Received message from Master: op=Shutter serial=348715
07:31:28 Shutter LASER close
07:31:28 Received message from Master: op=PointingHead serial=348719
07:31:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:31:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:31:29 Point started: ret=0
07:31:29 point_skyscan result=0
07:31:29 Check angles
07:31:29 SkyScan query
07:31:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.28<-21552  Statuses=0008 0009
07:31:30 Msec=0  True Az=112.995  Ze=-143.28  Az status=0008  Ze status=0009
07:31:30 Check angles
07:31:30 SkyScan query
07:31:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.875<-20125  Statuses=0008 0009
07:31:31 Msec=750  True Az=112.995  Ze=-121.875  Az status=0008  Ze status=0009
07:31:31 Check angles
07:31:31 SkyScan query
07:31:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.95<-18730  Statuses=0008 0009
07:31:31 Msec=1500  True Az=112.995  Ze=-100.95  Az status=0008  Ze status=0009
07:31:32 Check angles
07:31:32 SkyScan query
07:31:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.01<-17334  Statuses=0008 0009
07:31:32 Msec=2250  True Az=112.995  Ze=-80.01  Az status=0008  Ze status=0009
07:31:32 Check angles
07:31:32 SkyScan query
07:31:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
07:31:33 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
07:31:33 Check angles
07:31:33 SkyScan query
07:31:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.055<-14537  Statuses=0008 0009
07:31:34 Msec=3750  True Az=112.995  Ze=-38.055  Az status=0008  Ze status=0009
07:31:34 Check angles
07:31:34 SkyScan query
07:31:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.115<-13141  Statuses=0008 0009
07:31:34 Msec=4500  True Az=112.995  Ze=-17.115  Az status=0008  Ze status=0009
07:31:35 Check angles
07:31:35 SkyScan query
07:31:35 SkyScan query done: ret=0  az=112.995<-7533  ze=3.84<-11744  Statuses=0008 0009
07:31:35 Msec=5250  True Az=112.995  Ze=3.84  Az status=0008  Ze status=0009
07:31:35 Check angles
07:31:35 SkyScan query
07:31:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:31:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:31:36 Message to Master queued w/err=0: serial=348719 error=0
07:31:41 Received message from Master: op=Filter serial=348720
07:31:41 Color wheel filter change from 0 to 0
07:31:41 FLIGetFilterPos err=0  currentPosition=0
07:31:41 FLIGetStepsRemaining err=0  RemainingSteps=0
07:31:41 Filter is already there-color wheel unchanged
07:31:41 Received message from Master: op=Shutter serial=348721
07:31:41 Shutter LASER close
07:31:41 Received message from Camera: op=State serial=348723
07:31:41 GetSingleValue result=40  Value=cccccccc
07:31:41 SkyScan query
07:31:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:31:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:31:42 Parameters OK
07:31:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:31:42 Set A/D data flow result=40
07:31:42 Set A/D channel type result=40
07:31:42 Set A/D encoding result=40
07:31:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:31:42 Set channel filter=0.000000e+000  result=40
07:31:42 Config A/D  Result=40
07:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:31:42 Get A/D filter: -9.255963e+061  result=40
07:31:42 Get A/D value=-858993460  result=40
07:31:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:31:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:31:42 Parameters OK
07:31:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:31:42 Set A/D data flow result=40
07:31:42 Set A/D channel type result=40
07:31:42 Set A/D encoding result=40
07:31:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:31:42 Set channel filter=0.000000e+000  result=40
07:31:42 Config A/D  Result=40
07:31:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:31:42 Get A/D filter: -9.255963e+061  result=40
07:31:42 Get A/D value=-858993460  result=40
07:31:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:31:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:31:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:31:42 Aux=
07:31:42 Message to Camera, serial 348723 queued
07:32:19 Received message from Master: op=PointingHead serial=348736
07:32:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:32:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:32:19 Point started: ret=0
07:32:19 point_skyscan result=0
07:32:20 Check angles
07:32:20 SkyScan query
07:32:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:32:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:32:20 Message to Master queued w/err=0: serial=348736 error=0
07:32:25 Received message from Master: op=Filter serial=348737
07:32:25 Color wheel filter change from 0 to 0
07:32:25 FLIGetFilterPos err=0  currentPosition=0
07:32:25 FLIGetStepsRemaining err=0  RemainingSteps=0
07:32:25 Filter is already there-color wheel unchanged
07:32:26 Received message from Master: op=Shutter serial=348738
07:32:26 Shutter LASER close
07:32:26 Received message from Camera: op=State serial=348740
07:32:26 GetSingleValue result=40  Value=cccccccc
07:32:26 SkyScan query
07:32:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:32:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:32:26 Parameters OK
07:32:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:32:26 Set A/D data flow result=40
07:32:26 Set A/D channel type result=40
07:32:26 Set A/D encoding result=40
07:32:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:32:26 Set channel filter=0.000000e+000  result=40
07:32:26 Config A/D  Result=40
07:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:32:26 Get A/D filter: -9.255963e+061  result=40
07:32:26 Get A/D value=-858993460  result=40
07:32:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:32:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:32:26 Parameters OK
07:32:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:32:26 Set A/D data flow result=40
07:32:26 Set A/D channel type result=40
07:32:26 Set A/D encoding result=40
07:32:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:32:26 Set channel filter=0.000000e+000  result=40
07:32:26 Config A/D  Result=40
07:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:32:26 Get A/D filter: -9.255963e+061  result=40
07:32:26 Get A/D value=-858993460  result=40
07:32:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:32:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:32:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:32:26 Aux=
07:32:26 Message to Camera, serial 348740 queued
07:33:03 Received message from Master: op=PointingHead serial=348753
07:33:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:33:03 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:33:03 Point started: ret=0
07:33:03 point_skyscan result=0
07:33:04 Check angles
07:33:04 SkyScan query
07:33:05 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.51<-12434  Statuses=0009 0008
07:33:05 Msec=0  True Az=135.9  Ze=-6.51  Az status=0009  Ze status=0008
07:33:05 Check angles
07:33:05 SkyScan query
07:33:05 SkyScan query done: ret=0  az=153.45<-10230  ze=-6.495<-12433  Statuses=0009 0008
07:33:05 Msec=750  True Az=153.45  Ze=-6.495  Az status=0009  Ze status=0008
07:33:06 Check angles
07:33:06 SkyScan query
07:33:06 SkyScan query done: ret=0  az=170.82<-11388  ze=-6.495<-12433  Statuses=0009 0008
07:33:06 Msec=1500  True Az=170.82  Ze=-6.495  Az status=0009  Ze status=0008
07:33:06 Check angles
07:33:06 SkyScan query
07:33:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:33:07 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:33:07 Message to Master queued w/err=0: serial=348753 error=0
07:33:12 Received message from Master: op=Filter serial=348754
07:33:12 Color wheel filter change from 0 to 0
07:33:12 FLIGetFilterPos err=0  currentPosition=0
07:33:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:33:12 Filter is already there-color wheel unchanged
07:33:12 Received message from Master: op=Shutter serial=348755
07:33:12 Shutter LASER close
07:33:12 Received message from Camera: op=State serial=348757
07:33:12 GetSingleValue result=40  Value=cccccccc
07:33:12 SkyScan query
07:33:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:33:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:33:13 Parameters OK
07:33:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:33:13 Set A/D data flow result=40
07:33:13 Set A/D channel type result=40
07:33:13 Set A/D encoding result=40
07:33:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:33:13 Set channel filter=0.000000e+000  result=40
07:33:13 Config A/D  Result=40
07:33:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:33:13 Get A/D filter: -9.255963e+061  result=40
07:33:13 Get A/D value=-858993460  result=40
07:33:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:33:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:33:13 Parameters OK
07:33:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:33:13 Set A/D data flow result=40
07:33:13 Set A/D channel type result=40
07:33:13 Set A/D encoding result=40
07:33:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:33:13 Set channel filter=0.000000e+000  result=40
07:33:13 Config A/D  Result=40
07:33:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:33:13 Get A/D filter: -9.255963e+061  result=40
07:33:13 Get A/D value=-858993460  result=40
07:33:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:33:13 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:33:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:33:13 Aux=
07:33:13 Message to Camera, serial 348757 queued
07:33:35 Received message from Master: op=Identify serial=348758
07:33:49 Received message from Master: op=PointingHead serial=348773
07:33:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:33:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:33:50 Point started: ret=0
07:33:50 point_skyscan result=0
07:33:51 Check angles
07:33:51 SkyScan query
07:33:51 SkyScan query done: ret=0  az=153.195<-10213  ze=6.51<-11566  Statuses=0009 0008
07:33:51 Msec=0  True Az=153.195  Ze=6.51  Az status=0009  Ze status=0008
07:33:51 Check angles
07:33:51 SkyScan query
07:33:52 SkyScan query done: ret=0  az=135.3<-9020  ze=6.495<-11567  Statuses=0009 0008
07:33:52 Msec=750  True Az=135.3  Ze=6.495  Az status=0009  Ze status=0008
07:33:52 Check angles
07:33:52 SkyScan query
07:33:53 SkyScan query done: ret=0  az=117.525<-7835  ze=6.495<-11567  Statuses=0009 0008
07:33:53 Msec=1500  True Az=117.525  Ze=6.495  Az status=0009  Ze status=0008
07:33:53 Check angles
07:33:53 SkyScan query
07:33:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:33:53 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:33:53 Message to Master queued w/err=0: serial=348773 error=0
07:33:58 Received message from Master: op=Filter serial=348774
07:33:58 Color wheel filter change from 0 to 0
07:33:58 FLIGetFilterPos err=0  currentPosition=0
07:33:58 FLIGetStepsRemaining err=0  RemainingSteps=0
07:33:58 Filter is already there-color wheel unchanged
07:33:59 Received message from Master: op=Shutter serial=348775
07:33:59 Shutter LASER close
07:33:59 Received message from Camera: op=State serial=348777
07:33:59 GetSingleValue result=40  Value=cccccccc
07:33:59 SkyScan query
07:33:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:33:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:33:59 Parameters OK
07:33:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:33:59 Set A/D data flow result=40
07:33:59 Set A/D channel type result=40
07:33:59 Set A/D encoding result=40
07:33:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:33:59 Set channel filter=0.000000e+000  result=40
07:33:59 Config A/D  Result=40
07:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:33:59 Get A/D filter: -9.255963e+061  result=40
07:33:59 Get A/D value=-858993460  result=40
07:33:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:33:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:33:59 Parameters OK
07:33:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:33:59 Set A/D data flow result=40
[UTC 2019-3-19  07:33:59]
07:33:59 Set A/D channel type result=40
07:33:59 Set A/D encoding result=40
07:33:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:33:59 Set channel filter=0.000000e+000  result=40
07:33:59 Config A/D  Result=40
07:33:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:33:59 Get A/D filter: -9.255963e+061  result=40
07:33:59 Get A/D value=-858993460  result=40
07:33:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:33:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:33:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:33:59 Aux=
07:33:59 Message to Camera, serial 348777 queued
07:34:36 Received message from Master: op=PointingHead serial=348790
07:34:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:34:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:34:36 Point started: ret=0
07:34:36 point_skyscan result=0
07:34:37 Check angles
07:34:37 SkyScan query
07:34:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.19<-13546  Statuses=0008 0009
07:34:38 Msec=0  True Az=112.995  Ze=-23.19  Az status=0008  Ze status=0009
07:34:38 Check angles
07:34:38 SkyScan query
07:34:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
07:34:38 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
07:34:39 Check angles
07:34:39 SkyScan query
07:34:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.55<-16370  Statuses=0008 0009
07:34:39 Msec=1500  True Az=112.995  Ze=-65.55  Az status=0008  Ze status=0009
07:34:39 Check angles
07:34:39 SkyScan query
07:34:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.52<-17768  Statuses=0008 0009
07:34:40 Msec=2250  True Az=112.995  Ze=-86.52  Az status=0008  Ze status=0009
07:34:40 Check angles
07:34:40 SkyScan query
07:34:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.46<-19164  Statuses=0008 0009
07:34:41 Msec=3000  True Az=112.995  Ze=-107.46  Az status=0008  Ze status=0009
07:34:41 Check angles
07:34:41 SkyScan query
07:34:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.4<-20560  Statuses=0008 0009
07:34:41 Msec=3750  True Az=112.995  Ze=-128.4  Az status=0008  Ze status=0009
07:34:42 Check angles
07:34:42 SkyScan query
07:34:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.37<-21958  Statuses=0008 0009
07:34:42 Msec=4500  True Az=112.995  Ze=-149.37  Az status=0008  Ze status=0009
07:34:42 Check angles
07:34:42 SkyScan query
07:34:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.295<-23353  Statuses=0008 0009
07:34:43 Msec=5250  True Az=112.995  Ze=-170.295  Az status=0008  Ze status=0009
07:34:43 Check angles
07:34:43 SkyScan query
07:34:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:34:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:34:44 Message to Master queued w/err=0: serial=348790 error=0
07:34:49 Received message from Master: op=Filter serial=348791
07:34:49 Color wheel filter change from 0 to 0
07:34:49 FLIGetFilterPos err=0  currentPosition=0
07:34:49 FLIGetStepsRemaining err=0  RemainingSteps=0
07:34:49 Filter is already there-color wheel unchanged
07:34:49 Received message from Master: op=Shutter serial=348792
07:34:49 Shutter LASER open
07:34:49 Received message from Camera: op=State serial=348794
07:34:49 GetSingleValue result=40  Value=cccccccc
07:34:49 SkyScan query
07:34:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:34:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:34:50 Parameters OK
07:34:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:34:50 Set A/D data flow result=40
07:34:50 Set A/D channel type result=40
07:34:50 Set A/D encoding result=40
07:34:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:34:50 Set channel filter=0.000000e+000  result=40
07:34:50 Config A/D  Result=40
07:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:34:50 Get A/D filter: -9.255963e+061  result=40
07:34:50 Get A/D value=-858993460  result=40
07:34:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:34:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:34:50 Parameters OK
07:34:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:34:50 Set A/D data flow result=40
07:34:50 Set A/D channel type result=40
07:34:50 Set A/D encoding result=40
07:34:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:34:50 Set channel filter=0.000000e+000  result=40
07:34:50 Config A/D  Result=40
07:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:34:50 Get A/D filter: -9.255963e+061  result=40
07:34:50 Get A/D value=-858993460  result=40
07:34:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:34:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:34:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:34:50 Aux=
07:34:50 Message to Camera, serial 348794 queued
07:34:57 Received message from Master: op=Shutter serial=348803
07:34:57 Shutter LASER close
07:34:58 Received message from Master: op=PointingHead serial=348807
07:34:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:34:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:34:58 Point started: ret=0
07:34:58 point_skyscan result=0
07:34:59 Check angles
07:34:59 SkyScan query
07:34:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
07:34:59 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
07:34:59 Check angles
07:34:59 SkyScan query
07:35:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
07:35:00 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
07:35:00 Check angles
07:35:00 SkyScan query
07:35:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
07:35:01 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
07:35:01 Check angles
07:35:01 SkyScan query
07:35:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.89<-17326  Statuses=0008 0009
07:35:02 Msec=2250  True Az=112.995  Ze=-79.89  Az status=0008  Ze status=0009
07:35:02 Check angles
07:35:02 SkyScan query
07:35:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.95<-15930  Statuses=0008 0009
07:35:02 Msec=3000  True Az=112.995  Ze=-58.95  Az status=0008  Ze status=0009
07:35:03 Check angles
07:35:03 SkyScan query
07:35:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.53<-14502  Statuses=0008 0009
07:35:03 Msec=3750  True Az=112.995  Ze=-37.53  Az status=0008  Ze status=0009
07:35:03 Check angles
07:35:03 SkyScan query
07:35:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.125<-13075  Statuses=0008 0009
07:35:04 Msec=4500  True Az=112.995  Ze=-16.125  Az status=0008  Ze status=0009
07:35:04 Check angles
07:35:04 SkyScan query
07:35:05 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
07:35:05 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
07:35:05 Check angles
07:35:05 SkyScan query
07:35:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:35:05 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:35:05 Message to Master queued w/err=0: serial=348807 error=0
07:35:10 Received message from Master: op=Filter serial=348808
07:35:10 Color wheel filter change from 0 to 0
07:35:10 FLIGetFilterPos err=0  currentPosition=0
07:35:10 FLIGetStepsRemaining err=0  RemainingSteps=0
07:35:10 Filter is already there-color wheel unchanged
07:35:11 Received message from Master: op=Shutter serial=348809
07:35:11 Shutter LASER close
07:35:11 Received message from Camera: op=State serial=348811
07:35:11 GetSingleValue result=40  Value=cccccccc
07:35:11 SkyScan query
07:35:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:35:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:35:11 Parameters OK
07:35:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:35:11 Set A/D data flow result=40
07:35:11 Set A/D channel type result=40
07:35:11 Set A/D encoding result=40
07:35:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:35:11 Set channel filter=0.000000e+000  result=40
07:35:11 Config A/D  Result=40
07:35:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:35:11 Get A/D filter: -9.255963e+061  result=40
07:35:11 Get A/D value=-858993460  result=40
07:35:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:35:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:35:11 Parameters OK
07:35:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:35:11 Set A/D data flow result=40
07:35:11 Set A/D channel type result=40
07:35:11 Set A/D encoding result=40
07:35:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:35:11 Set channel filter=0.000000e+000  result=40
07:35:11 Config A/D  Result=40
07:35:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:35:11 Get A/D filter: -9.255963e+061  result=40
07:35:11 Get A/D value=-858993460  result=40
07:35:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:35:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:35:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:35:11 Aux=
07:35:11 Message to Camera, serial 348811 queued
07:35:48 Received message from Master: op=PointingHead serial=348824
07:35:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:35:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:35:48 Point started: ret=0
07:35:48 point_skyscan result=0
07:35:49 Check angles
07:35:49 SkyScan query
07:35:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:35:50 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:35:50 Message to Master queued w/err=0: serial=348824 error=0
07:35:55 Received message from Master: op=Filter serial=348825
07:35:55 Color wheel filter change from 0 to 0
07:35:55 FLIGetFilterPos err=0  currentPosition=0
07:35:55 FLIGetStepsRemaining err=0  RemainingSteps=0
07:35:55 Filter is already there-color wheel unchanged
07:35:55 Received message from Master: op=Shutter serial=348826
07:35:55 Shutter LASER close
07:35:55 Received message from Camera: op=State serial=348828
07:35:55 GetSingleValue result=40  Value=cccccccc
07:35:55 SkyScan query
07:35:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:35:56 Parameters OK
07:35:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:35:56 Set A/D data flow result=40
07:35:56 Set A/D channel type result=40
07:35:56 Set A/D encoding result=40
07:35:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:35:56 Set channel filter=0.000000e+000  result=40
07:35:56 Config A/D  Result=40
07:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:35:56 Get A/D filter: -9.255963e+061  result=40
07:35:56 Get A/D value=-858993460  result=40
07:35:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:35:56 Parameters OK
07:35:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:35:56 Set A/D data flow result=40
07:35:56 Set A/D channel type result=40
07:35:56 Set A/D encoding result=40
07:35:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:35:56 Set channel filter=0.000000e+000  result=40
07:35:56 Config A/D  Result=40
07:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:35:56 Get A/D filter: -9.255963e+061  result=40
07:35:56 Get A/D value=-858993460  result=40
07:35:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:35:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:35:56 Aux=
07:35:56 Message to Camera, serial 348828 queued
07:36:32 Received message from Master: op=PointingHead serial=348841
07:36:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:36:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:36:33 Point started: ret=0
07:36:33 point_skyscan result=0
07:36:34 Check angles
07:36:34 SkyScan query
07:36:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:36:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:36:34 Message to Master queued w/err=0: serial=348841 error=0
07:36:39 Received message from Master: op=Filter serial=348842
07:36:39 Color wheel filter change from 0 to 0
07:36:39 FLIGetFilterPos err=0  currentPosition=0
07:36:39 FLIGetStepsRemaining err=0  RemainingSteps=0
07:36:39 Filter is already there-color wheel unchanged
07:36:39 Received message from Master: op=Shutter serial=348843
07:36:39 Shutter LASER close
07:36:39 Received message from Camera: op=State serial=348845
07:36:39 GetSingleValue result=40  Value=cccccccc
07:36:39 SkyScan query
07:36:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:36:40 Parameters OK
07:36:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:36:40 Set A/D data flow result=40
07:36:40 Set A/D channel type result=40
07:36:40 Set A/D encoding result=40
07:36:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:36:40 Set channel filter=0.000000e+000  result=40
07:36:40 Config A/D  Result=40
07:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:36:40 Get A/D filter: -9.255963e+061  result=40
07:36:40 Get A/D value=-858993460  result=40
07:36:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:36:40 Parameters OK
07:36:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:36:40 Set A/D data flow result=40
07:36:40 Set A/D channel type result=40
07:36:40 Set A/D encoding result=40
07:36:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:36:40 Set channel filter=0.000000e+000  result=40
07:36:40 Config A/D  Result=40
07:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:36:40 Get A/D filter: -9.255963e+061  result=40
07:36:40 Get A/D value=-858993460  result=40
07:36:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:36:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:36:40 Aux=
07:36:40 Message to Camera, serial 348845 queued
07:37:17 Received message from Master: op=PointingHead serial=348858
07:37:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:37:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:37:17 Point started: ret=0
07:37:17 point_skyscan result=0
07:37:18 Check angles
07:37:18 SkyScan query
07:37:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:37:18 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:37:18 Message to Master queued w/err=0: serial=348858 error=0
07:37:23 Received message from Master: op=Filter serial=348859
07:37:23 Color wheel filter change from 0 to 0
07:37:23 FLIGetFilterPos err=0  currentPosition=0
07:37:23 FLIGetStepsRemaining err=0  RemainingSteps=0
07:37:23 Filter is already there-color wheel unchanged
07:37:24 Received message from Master: op=Shutter serial=348860
07:37:24 Shutter LASER close
07:37:24 Received message from Camera: op=State serial=348862
07:37:24 GetSingleValue result=40  Value=cccccccc
07:37:24 SkyScan query
07:37:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:37:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:37:24 Parameters OK
07:37:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:37:24 Set A/D data flow result=40
07:37:24 Set A/D channel type result=40
07:37:24 Set A/D encoding result=40
07:37:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:37:24 Set channel filter=0.000000e+000  result=40
07:37:24 Config A/D  Result=40
07:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:37:24 Get A/D filter: -9.255963e+061  result=40
07:37:24 Get A/D value=-858993460  result=40
07:37:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:37:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:37:24 Parameters OK
07:37:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:37:24 Set A/D data flow result=40
07:37:24 Set A/D channel type result=40
07:37:24 Set A/D encoding result=40
07:37:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:37:24 Set channel filter=0.000000e+000  result=40
07:37:24 Config A/D  Result=40
07:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:37:24 Get A/D filter: -9.255963e+061  result=40
07:37:24 Get A/D value=-858993460  result=40
07:37:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:37:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:37:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:37:24 Aux=
07:37:24 Message to Camera, serial 348862 queued
07:38:01 Received message from Master: op=PointingHead serial=348875
07:38:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:38:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:38:01 Point started: ret=0
07:38:01 point_skyscan result=0
07:38:02 Check angles
07:38:02 SkyScan query
07:38:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.01<-13534  Statuses=0008 0009
07:38:03 Msec=0  True Az=112.995  Ze=-23.01  Az status=0008  Ze status=0009
07:38:03 Check angles
07:38:03 SkyScan query
07:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.98<-14932  Statuses=0008 0009
07:38:04 Msec=750  True Az=112.995  Ze=-43.98  Az status=0008  Ze status=0009
07:38:04 Check angles
07:38:04 SkyScan query
07:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.95<-16330  Statuses=0008 0009
07:38:04 Msec=1500  True Az=112.995  Ze=-64.95  Az status=0008  Ze status=0009
07:38:04 Check angles
07:38:04 SkyScan query
07:38:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.34<-17756  Statuses=0008 0009
07:38:05 Msec=2250  True Az=112.995  Ze=-86.34  Az status=0008  Ze status=0009
07:38:05 Check angles
07:38:05 SkyScan query
07:38:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.715<-19181  Statuses=0008 0009
07:38:06 Msec=3000  True Az=112.995  Ze=-107.715  Az status=0008  Ze status=0009
07:38:06 Check angles
07:38:06 SkyScan query
07:38:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.655<-20577  Statuses=0008 0009
07:38:07 Msec=3750  True Az=112.995  Ze=-128.655  Az status=0008  Ze status=0009
07:38:07 Check angles
07:38:07 SkyScan query
07:38:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.625<-21975  Statuses=0008 0009
07:38:07 Msec=4500  True Az=112.995  Ze=-149.625  Az status=0008  Ze status=0009
07:38:07 Check angles
07:38:07 SkyScan query
07:38:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.55<-23370  Statuses=0008 0009
07:38:08 Msec=5250  True Az=112.995  Ze=-170.55  Az status=0008  Ze status=0009
07:38:08 Check angles
07:38:08 SkyScan query
07:38:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:38:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:38:09 Message to Master queued w/err=0: serial=348875 error=0
07:38:14 Received message from Master: op=Filter serial=348876
07:38:14 Color wheel filter change from 0 to 0
07:38:14 FLIGetFilterPos err=0  currentPosition=0
07:38:14 FLIGetStepsRemaining err=0  RemainingSteps=0
07:38:14 Filter is already there-color wheel unchanged
07:38:14 Received message from Master: op=Shutter serial=348877
07:38:14 Shutter LASER open
07:38:14 Received message from Camera: op=State serial=348879
07:38:14 GetSingleValue result=40  Value=cccccccc
07:38:14 SkyScan query
07:38:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:38:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:15 Parameters OK
07:38:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:15 Set A/D data flow result=40
07:38:15 Set A/D channel type result=40
07:38:15 Set A/D encoding result=40
07:38:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:15 Set channel filter=0.000000e+000  result=40
07:38:15 Config A/D  Result=40
07:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:15 Get A/D filter: -9.255963e+061  result=40
07:38:15 Get A/D value=-858993460  result=40
07:38:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:15 Parameters OK
07:38:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:15 Set A/D data flow result=40
07:38:15 Set A/D channel type result=40
07:38:15 Set A/D encoding result=40
07:38:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:15 Set channel filter=0.000000e+000  result=40
07:38:15 Config A/D  Result=40
07:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:15 Get A/D filter: -9.255963e+061  result=40
07:38:15 Get A/D value=-858993460  result=40
07:38:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:38:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:38:15 Aux=
07:38:15 Message to Camera, serial 348879 queued
07:38:23 Received message from Master: op=Shutter serial=348889
07:38:23 Shutter LASER close
07:38:24 Received message from Master: op=PointingHead serial=348893
07:38:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:38:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:38:24 Point started: ret=0
07:38:24 point_skyscan result=0
07:38:25 Check angles
07:38:25 SkyScan query
07:38:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.875<-21525  Statuses=0008 0009
07:38:25 Msec=0  True Az=112.995  Ze=-142.875  Az status=0008  Ze status=0009
07:38:26 Check angles
07:38:26 SkyScan query
07:38:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.905<-20127  Statuses=0008 0009
07:38:26 Msec=750  True Az=112.995  Ze=-121.905  Az status=0008  Ze status=0009
07:38:26 Check angles
07:38:26 SkyScan query
07:38:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.98<-18732  Statuses=0008 0009
07:38:27 Msec=1500  True Az=112.995  Ze=-100.98  Az status=0008  Ze status=0009
07:38:27 Check angles
07:38:27 SkyScan query
07:38:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.04<-17336  Statuses=0008 0009
07:38:28 Msec=2250  True Az=112.995  Ze=-80.04  Az status=0008  Ze status=0009
07:38:28 Check angles
07:38:28 SkyScan query
07:38:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.085<-15939  Statuses=0008 0009
07:38:28 Msec=3000  True Az=112.995  Ze=-59.085  Az status=0008  Ze status=0009
07:38:29 Check angles
07:38:29 SkyScan query
07:38:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.07<-14538  Statuses=0008 0009
07:38:29 Msec=3750  True Az=112.995  Ze=-38.07  Az status=0008  Ze status=0009
07:38:29 Check angles
07:38:29 SkyScan query
07:38:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.145<-13143  Statuses=0008 0009
07:38:30 Msec=4500  True Az=112.995  Ze=-17.145  Az status=0008  Ze status=0009
07:38:30 Check angles
07:38:30 SkyScan query
07:38:31 SkyScan query done: ret=0  az=112.995<-7533  ze=3.81<-11746  Statuses=0008 0009
07:38:31 Msec=5250  True Az=112.995  Ze=3.81  Az status=0008  Ze status=0009
07:38:31 Check angles
07:38:31 SkyScan query
07:38:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:38:31 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:38:31 Message to Master queued w/err=0: serial=348893 error=0
07:38:36 Received message from Master: op=Filter serial=348894
07:38:36 Color wheel filter change from 0 to 0
07:38:36 FLIGetFilterPos err=0  currentPosition=0
07:38:36 FLIGetStepsRemaining err=0  RemainingSteps=0
07:38:36 Filter is already there-color wheel unchanged
07:38:37 Received message from Master: op=Shutter serial=348895
07:38:37 Shutter LASER close
07:38:37 Received message from Camera: op=State serial=348897
07:38:37 GetSingleValue result=40  Value=cccccccc
07:38:37 SkyScan query
07:38:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:37 Parameters OK
07:38:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:37 Set A/D data flow result=40
07:38:37 Set A/D channel type result=40
07:38:37 Set A/D encoding result=40
07:38:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:37 Set channel filter=0.000000e+000  result=40
07:38:37 Config A/D  Result=40
07:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:37 Get A/D filter: -9.255963e+061  result=40
07:38:37 Get A/D value=-858993460  result=40
07:38:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:37 Parameters OK
07:38:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:37 Set A/D data flow result=40
07:38:37 Set A/D channel type result=40
07:38:37 Set A/D encoding result=40
07:38:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:37 Set channel filter=0.000000e+000  result=40
07:38:37 Config A/D  Result=40
07:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:37 Get A/D filter: -9.255963e+061  result=40
07:38:37 Get A/D value=-858993460  result=40
07:38:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:38:37 Aux=
07:38:37 Message to Camera, serial 348897 queued
07:39:14 Received message from Master: op=PointingHead serial=348910
07:39:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:39:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:39:15 Point started: ret=0
07:39:15 point_skyscan result=0
07:39:15 Check angles
07:39:15 SkyScan query
07:39:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:39:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:39:16 Message to Master queued w/err=0: serial=348910 error=0
07:39:21 Received message from Master: op=Filter serial=348911
07:39:21 Color wheel filter change from 0 to 0
07:39:21 FLIGetFilterPos err=0  currentPosition=0
07:39:21 FLIGetStepsRemaining err=0  RemainingSteps=0
07:39:21 Filter is already there-color wheel unchanged
07:39:21 Received message from Master: op=Shutter serial=348912
07:39:21 Shutter LASER close
07:39:21 Received message from Camera: op=State serial=348914
07:39:21 GetSingleValue result=40  Value=cccccccc
07:39:21 SkyScan query
07:39:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:39:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:39:22 Parameters OK
07:39:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:39:22 Set A/D data flow result=40
07:39:22 Set A/D channel type result=40
07:39:22 Set A/D encoding result=40
07:39:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:39:22 Set channel filter=0.000000e+000  result=40
07:39:22 Config A/D  Result=40
07:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:39:22 Get A/D filter: -9.255963e+061  result=40
07:39:22 Get A/D value=-858993460  result=40
07:39:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:39:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:39:22 Parameters OK
07:39:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:39:22 Set A/D data flow result=40
07:39:22 Set A/D channel type result=40
07:39:22 Set A/D encoding result=40
07:39:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:39:22 Set channel filter=0.000000e+000  result=40
07:39:22 Config A/D  Result=40
07:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:39:22 Get A/D filter: -9.255963e+061  result=40
07:39:22 Get A/D value=-858993460  result=40
07:39:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:39:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:39:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:39:22 Aux=
07:39:22 Message to Camera, serial 348914 queued
07:39:59 Received message from Master: op=PointingHead serial=348927
07:39:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:39:59 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:39:59 Point started: ret=0
07:39:59 point_skyscan result=0
07:40:00 Check angles
07:40:00 SkyScan query
07:40:00 SkyScan query done: ret=0  az=136.095<-9073  ze=-6.495<-12433  Statuses=0009 0008
07:40:00 Msec=0  True Az=136.095  Ze=-6.495  Az status=0009  Ze status=0008
07:40:00 Check angles
07:40:00 SkyScan query
07:40:01 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.48<-12432  Statuses=0009 0008
07:40:01 Msec=750  True Az=153.9  Ze=-6.48  Az status=0009  Ze status=0008
07:40:01 Check angles
07:40:01 SkyScan query
07:40:02 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.48<-12432  Statuses=0009 0008
07:40:02 Msec=1500  True Az=171.33  Ze=-6.48  Az status=0009  Ze status=0008
07:40:02 Check angles
07:40:02 SkyScan query
07:40:02 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
07:40:02 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
07:40:02 Message to Master queued w/err=0: serial=348927 error=0
07:40:07 Received message from Master: op=Filter serial=348928
07:40:07 Color wheel filter change from 0 to 0
07:40:07 FLIGetFilterPos err=0  currentPosition=0
07:40:07 FLIGetStepsRemaining err=0  RemainingSteps=0
07:40:07 Filter is already there-color wheel unchanged
07:40:08 Received message from Master: op=Shutter serial=348929
07:40:08 Shutter LASER close
07:40:08 Received message from Camera: op=State serial=348931
07:40:08 GetSingleValue result=40  Value=cccccccc
07:40:08 SkyScan query
07:40:08 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
07:40:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:40:08 Parameters OK
07:40:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:40:08 Set A/D data flow result=40
07:40:08 Set A/D channel type result=40
07:40:08 Set A/D encoding result=40
07:40:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:40:08 Set channel filter=0.000000e+000  result=40
07:40:08 Config A/D  Result=40
07:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:40:08 Get A/D filter: -9.255963e+061  result=40
07:40:08 Get A/D value=-858993460  result=40
07:40:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:40:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:40:08 Parameters OK
07:40:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:40:08 Set A/D data flow result=40
07:40:08 Set A/D channel type result=40
07:40:08 Set A/D encoding result=40
07:40:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:40:08 Set channel filter=0.000000e+000  result=40
07:40:08 Config A/D  Result=40
07:40:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:40:08 Get A/D filter: -9.255963e+061  result=40
07:40:08 Get A/D value=-858993460  result=40
07:40:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:40:08 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:40:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:40:08 Aux=
07:40:08 Message to Camera, serial 348931 queued
07:40:45 Received message from Master: op=PointingHead serial=348944
07:40:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:40:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:40:45 Point started: ret=0
07:40:45 point_skyscan result=0
07:40:46 Check angles
07:40:46 SkyScan query
07:40:47 SkyScan query done: ret=0  az=153.18<-10212  ze=6.51<-11566  Statuses=0009 0008
07:40:47 Msec=0  True Az=153.18  Ze=6.51  Az status=0009  Ze status=0008
07:40:47 Check angles
07:40:47 SkyScan query
07:40:48 SkyScan query done: ret=0  az=135.3<-9020  ze=6.495<-11567  Statuses=0009 0008
07:40:48 Msec=750  True Az=135.3  Ze=6.495  Az status=0009  Ze status=0008
07:40:48 Check angles
07:40:48 SkyScan query
07:40:48 SkyScan query done: ret=0  az=117.42<-7828  ze=6.495<-11567  Statuses=0009 0008
07:40:48 Msec=1500  True Az=117.42  Ze=6.495  Az status=0009  Ze status=0008
07:40:48 Check angles
07:40:48 SkyScan query
07:40:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:40:49 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:40:49 Message to Master queued w/err=0: serial=348944 error=0
07:40:54 Received message from Master: op=Filter serial=348945
07:40:54 Color wheel filter change from 0 to 0
07:40:54 FLIGetFilterPos err=0  currentPosition=0
07:40:54 FLIGetStepsRemaining err=0  RemainingSteps=0
07:40:54 Filter is already there-color wheel unchanged
07:40:54 Received message from Master: op=Shutter serial=348946
07:40:54 Shutter LASER close
07:40:54 Received message from Camera: op=State serial=348948
07:40:54 GetSingleValue result=40  Value=cccccccc
07:40:54 SkyScan query
07:40:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:40:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:40:55 Parameters OK
07:40:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:40:55 Set A/D data flow result=40
07:40:55 Set A/D channel type result=40
07:40:55 Set A/D encoding result=40
07:40:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:40:55 Set channel filter=0.000000e+000  result=40
07:40:55 Config A/D  Result=40
07:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:40:55 Get A/D filter: -9.255963e+061  result=40
07:40:55 Get A/D value=-858993460  result=40
07:40:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:40:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:40:55 Parameters OK
07:40:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:40:55 Set A/D data flow result=40
07:40:55 Set A/D channel type result=40
07:40:55 Set A/D encoding result=40
07:40:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:40:55 Set channel filter=0.000000e+000  result=40
07:40:55 Config A/D  Result=40
07:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:40:55 Get A/D filter: -9.255963e+061  result=40
07:40:55 Get A/D value=-858993460  result=40
07:40:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:40:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:40:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:40:55 Aux=
07:40:55 Message to Camera, serial 348948 queued
07:41:32 Received message from Master: op=PointingHead serial=348961
07:41:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:41:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:41:32 Point started: ret=0
07:41:32 point_skyscan result=0
07:41:33 Check angles
07:41:33 SkyScan query
07:41:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
07:41:33 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
07:41:34 Check angles
07:41:34 SkyScan query
07:41:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
07:41:34 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
07:41:34 Check angles
07:41:34 SkyScan query
07:41:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.79<-16386  Statuses=0008 0009
07:41:35 Msec=1500  True Az=112.995  Ze=-65.79  Az status=0008  Ze status=0009
07:41:35 Check angles
07:41:35 SkyScan query
07:41:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
07:41:36 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
07:41:36 Check angles
07:41:36 SkyScan query
07:41:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.685<-19179  Statuses=0008 0009
07:41:36 Msec=3000  True Az=112.995  Ze=-107.685  Az status=0008  Ze status=0009
07:41:37 Check angles
07:41:37 SkyScan query
07:41:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.625<-20575  Statuses=0008 0009
07:41:37 Msec=3750  True Az=112.995  Ze=-128.625  Az status=0008  Ze status=0009
07:41:37 Check angles
07:41:37 SkyScan query
07:41:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.58<-21972  Statuses=0008 0009
07:41:38 Msec=4500  True Az=112.995  Ze=-149.58  Az status=0008  Ze status=0009
07:41:38 Check angles
07:41:38 SkyScan query
07:41:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.505<-23367  Statuses=0008 0009
07:41:39 Msec=5250  True Az=112.995  Ze=-170.505  Az status=0008  Ze status=0009
07:41:39 Check angles
07:41:39 SkyScan query
07:41:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:41:39 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:41:39 Message to Master queued w/err=0: serial=348961 error=0
07:41:44 Received message from Master: op=Filter serial=348962
07:41:44 Color wheel filter change from 0 to 0
07:41:44 FLIGetFilterPos err=0  currentPosition=0
07:41:44 FLIGetStepsRemaining err=0  RemainingSteps=0
07:41:44 Filter is already there-color wheel unchanged
07:41:45 Received message from Master: op=Shutter serial=348963
07:41:45 Shutter LASER open
07:41:45 Received message from Camera: op=State serial=348965
07:41:45 GetSingleValue result=40  Value=cccccccc
07:41:45 SkyScan query
07:41:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:41:45 Parameters OK
07:41:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:41:45 Set A/D data flow result=40
07:41:45 Set A/D channel type result=40
07:41:45 Set A/D encoding result=40
07:41:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:41:45 Set channel filter=0.000000e+000  result=40
07:41:45 Config A/D  Result=40
07:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:41:45 Get A/D filter: -9.255963e+061  result=40
07:41:45 Get A/D value=-858993460  result=40
07:41:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:41:45 Parameters OK
07:41:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:41:45 Set A/D data flow result=40
07:41:45 Set A/D channel type result=40
07:41:45 Set A/D encoding result=40
07:41:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:41:45 Set channel filter=0.000000e+000  result=40
07:41:45 Config A/D  Result=40
07:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:41:45 Get A/D filter: -9.255963e+061  result=40
07:41:45 Get A/D value=-858993460  result=40
07:41:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:41:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:41:45 Aux=
07:41:45 Message to Camera, serial 348965 queued
07:41:54 Received message from Master: op=Shutter serial=348975
07:41:54 Shutter LASER close
07:41:54 Received message from Master: op=PointingHead serial=348979
07:41:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:41:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:41:54 Point started: ret=0
07:41:54 point_skyscan result=0
07:41:55 Check angles
07:41:55 SkyScan query
07:41:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.535<-21569  Statuses=0008 0009
07:41:56 Msec=0  True Az=112.995  Ze=-143.535  Az status=0008  Ze status=0009
07:41:56 Check angles
07:41:56 SkyScan query
07:41:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.115<-20141  Statuses=0008 0009
07:41:57 Msec=750  True Az=112.995  Ze=-122.115  Az status=0008  Ze status=0009
07:41:57 Check angles
07:41:57 SkyScan query
07:41:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
07:41:57 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
07:41:58 Check angles
07:41:58 SkyScan query
07:41:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.785<-17319  Statuses=0008 0009
07:41:58 Msec=2250  True Az=112.995  Ze=-79.785  Az status=0008  Ze status=0009
07:41:58 Check angles
07:41:58 SkyScan query
07:41:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.83<-15922  Statuses=0008 0009
07:41:59 Msec=3000  True Az=112.995  Ze=-58.83  Az status=0008  Ze status=0009
07:41:59 Check angles
07:41:59 SkyScan query
07:42:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.86<-14524  Statuses=0008 0009
07:42:00 Msec=3750  True Az=112.995  Ze=-37.86  Az status=0008  Ze status=0009
07:42:00 Check angles
07:42:00 SkyScan query
07:42:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.92<-13128  Statuses=0008 0009
07:42:00 Msec=4500  True Az=112.995  Ze=-16.92  Az status=0008  Ze status=0009
07:42:01 Check angles
07:42:01 SkyScan query
07:42:01 SkyScan query done: ret=0  az=112.995<-7533  ze=4.02<-11732  Statuses=0008 0009
07:42:01 Msec=5250  True Az=112.995  Ze=4.02  Az status=0008  Ze status=0009
07:42:01 Check angles
07:42:01 SkyScan query
07:42:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:42:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:42:02 Message to Master queued w/err=0: serial=348979 error=0
07:42:07 Received message from Master: op=Filter serial=348980
07:42:07 Color wheel filter change from 0 to 0
07:42:07 FLIGetFilterPos err=0  currentPosition=0
07:42:07 FLIGetStepsRemaining err=0  RemainingSteps=0
07:42:07 Filter is already there-color wheel unchanged
07:42:07 Received message from Master: op=Shutter serial=348981
07:42:07 Shutter LASER close
07:42:07 Received message from Camera: op=State serial=348983
07:42:07 GetSingleValue result=40  Value=cccccccc
07:42:07 SkyScan query
07:42:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:42:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:42:08 Parameters OK
07:42:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:42:08 Set A/D data flow result=40
07:42:08 Set A/D channel type result=40
07:42:08 Set A/D encoding result=40
07:42:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:42:08 Set channel filter=0.000000e+000  result=40
07:42:08 Config A/D  Result=40
07:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:42:08 Get A/D filter: -9.255963e+061  result=40
07:42:08 Get A/D value=-858993460  result=40
07:42:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:42:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:42:08 Parameters OK
07:42:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:42:08 Set A/D data flow result=40
07:42:08 Set A/D channel type result=40
07:42:08 Set A/D encoding result=40
07:42:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:42:08 Set channel filter=0.000000e+000  result=40
07:42:08 Config A/D  Result=40
07:42:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:42:08 Get A/D filter: -9.255963e+061  result=40
07:42:08 Get A/D value=-858993460  result=40
07:42:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:42:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:42:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:42:08 Aux=
07:42:08 Message to Camera, serial 348983 queued
07:42:45 Received message from Master: op=PointingHead serial=348996
07:42:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:42:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:42:45 Point started: ret=0
07:42:45 point_skyscan result=0
07:42:46 Check angles
07:42:46 SkyScan query
07:42:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:42:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:42:46 Message to Master queued w/err=0: serial=348996 error=0
07:42:51 Received message from Master: op=Filter serial=348997
07:42:51 Color wheel filter change from 0 to 0
07:42:51 FLIGetFilterPos err=0  currentPosition=0
07:42:51 FLIGetStepsRemaining err=0  RemainingSteps=0
07:42:51 Filter is already there-color wheel unchanged
07:42:51 Received message from Master: op=Shutter serial=348998
07:42:51 Shutter LASER close
07:42:51 Received message from Camera: op=State serial=349000
07:42:51 GetSingleValue result=40  Value=cccccccc
07:42:51 SkyScan query
07:42:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:42:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:42:52 Parameters OK
07:42:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:42:52 Set A/D data flow result=40
07:42:52 Set A/D channel type result=40
07:42:52 Set A/D encoding result=40
07:42:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:42:52 Set channel filter=0.000000e+000  result=40
07:42:52 Config A/D  Result=40
07:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:42:52 Get A/D filter: -9.255963e+061  result=40
07:42:52 Get A/D value=-858993460  result=40
07:42:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:42:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:42:52 Parameters OK
07:42:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:42:52 Set A/D data flow result=40
07:42:52 Set A/D channel type result=40
07:42:52 Set A/D encoding result=40
07:42:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:42:52 Set channel filter=0.000000e+000  result=40
07:42:52 Config A/D  Result=40
07:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:42:52 Get A/D filter: -9.255963e+061  result=40
07:42:52 Get A/D value=-858993460  result=40
07:42:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:42:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:42:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:42:52 Aux=
07:42:52 Message to Camera, serial 349000 queued
07:43:29 Received message from Master: op=PointingHead serial=349013
07:43:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:43:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:43:29 Point started: ret=0
07:43:29 point_skyscan result=0
07:43:30 Check angles
07:43:30 SkyScan query
07:43:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:43:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:43:31 Message to Master queued w/err=0: serial=349013 error=0
07:43:36 Received message from Master: op=Filter serial=349014
07:43:36 Color wheel filter change from 0 to 0
07:43:36 FLIGetFilterPos err=0  currentPosition=0
07:43:36 FLIGetStepsRemaining err=0  RemainingSteps=0
07:43:36 Filter is already there-color wheel unchanged
07:43:36 Received message from Master: op=Shutter serial=349015
07:43:36 Shutter LASER close
07:43:36 Received message from Camera: op=State serial=349017
07:43:36 GetSingleValue result=40  Value=cccccccc
07:43:36 SkyScan query
07:43:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:43:36 Parameters OK
07:43:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:43:36 Set A/D data flow result=40
07:43:36 Set A/D channel type result=40
07:43:36 Set A/D encoding result=40
07:43:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:43:36 Set channel filter=0.000000e+000  result=40
07:43:36 Config A/D  Result=40
07:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:43:36 Get A/D filter: -9.255963e+061  result=40
07:43:36 Get A/D value=-858993460  result=40
07:43:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:43:36 Parameters OK
07:43:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:43:36 Set A/D data flow result=40
07:43:36 Set A/D channel type result=40
07:43:36 Set A/D encoding result=40
07:43:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:43:36 Set channel filter=0.000000e+000  result=40
07:43:36 Config A/D  Result=40
07:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:43:36 Get A/D filter: -9.255963e+061  result=40
07:43:36 Get A/D value=-858993460  result=40
07:43:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:43:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:43:36 Aux=
07:43:36 Message to Camera, serial 349017 queued
[UTC 2019-3-19  07:43:48]
07:44:13 Received message from Master: op=PointingHead serial=349030
07:44:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:44:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:44:14 Point started: ret=0
07:44:14 point_skyscan result=0
07:44:14 Check angles
07:44:14 SkyScan query
07:44:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:44:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:44:15 Message to Master queued w/err=0: serial=349030 error=0
07:44:20 Received message from Master: op=Filter serial=349031
07:44:20 Color wheel filter change from 0 to 0
07:44:20 FLIGetFilterPos err=0  currentPosition=0
07:44:20 FLIGetStepsRemaining err=0  RemainingSteps=0
07:44:20 Filter is already there-color wheel unchanged
07:44:20 Received message from Master: op=Shutter serial=349032
07:44:20 Shutter LASER close
07:44:20 Received message from Camera: op=State serial=349034
07:44:20 GetSingleValue result=40  Value=cccccccc
07:44:20 SkyScan query
07:44:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:44:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:44:21 Parameters OK
07:44:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:44:21 Set A/D data flow result=40
07:44:21 Set A/D channel type result=40
07:44:21 Set A/D encoding result=40
07:44:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:44:21 Set channel filter=0.000000e+000  result=40
07:44:21 Config A/D  Result=40
07:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:44:21 Get A/D filter: -9.255963e+061  result=40
07:44:21 Get A/D value=-858993460  result=40
07:44:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:44:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:44:21 Parameters OK
07:44:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:44:21 Set A/D data flow result=40
07:44:21 Set A/D channel type result=40
07:44:21 Set A/D encoding result=40
07:44:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:44:21 Set channel filter=0.000000e+000  result=40
07:44:21 Config A/D  Result=40
07:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:44:21 Get A/D filter: -9.255963e+061  result=40
07:44:21 Get A/D value=-858993460  result=40
07:44:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:44:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:44:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:44:21 Aux=
07:44:21 Message to Camera, serial 349034 queued
07:44:58 Received message from Master: op=PointingHead serial=349047
07:44:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:44:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:44:58 Point started: ret=0
07:44:58 point_skyscan result=0
07:44:59 Check angles
07:44:59 SkyScan query
07:44:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
07:44:59 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
07:44:59 Check angles
07:44:59 SkyScan query
07:45:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.76<-14984  Statuses=0008 0009
07:45:00 Msec=750  True Az=112.995  Ze=-44.76  Az status=0008  Ze status=0009
07:45:00 Check angles
07:45:00 SkyScan query
07:45:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.135<-16409  Statuses=0008 0009
07:45:01 Msec=1500  True Az=112.995  Ze=-66.135  Az status=0008  Ze status=0009
07:45:01 Check angles
07:45:01 SkyScan query
07:45:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.09<-17806  Statuses=0008 0009
07:45:02 Msec=2250  True Az=112.995  Ze=-87.09  Az status=0008  Ze status=0009
07:45:02 Check angles
07:45:02 SkyScan query
07:45:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.03<-19202  Statuses=0008 0009
07:45:02 Msec=3000  True Az=112.995  Ze=-108.03  Az status=0008  Ze status=0009
07:45:02 Check angles
07:45:02 SkyScan query
07:45:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.97<-20598  Statuses=0008 0009
07:45:03 Msec=3750  True Az=112.995  Ze=-128.97  Az status=0008  Ze status=0009
07:45:03 Check angles
07:45:03 SkyScan query
07:45:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.39<-22026  Statuses=0008 0009
07:45:04 Msec=4500  True Az=112.995  Ze=-150.39  Az status=0008  Ze status=0009
07:45:04 Check angles
07:45:04 SkyScan query
07:45:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.15<-23410  Statuses=0008 0009
07:45:05 Msec=5250  True Az=112.995  Ze=-171.15  Az status=0008  Ze status=0009
07:45:05 Check angles
07:45:05 SkyScan query
07:45:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:45:05 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:45:05 Message to Master queued w/err=0: serial=349047 error=0
07:45:10 Received message from Master: op=Filter serial=349048
07:45:10 Color wheel filter change from 0 to 0
07:45:10 FLIGetFilterPos err=0  currentPosition=0
07:45:10 FLIGetStepsRemaining err=0  RemainingSteps=0
07:45:10 Filter is already there-color wheel unchanged
07:45:10 Received message from Master: op=Shutter serial=349049
07:45:10 Shutter LASER open
07:45:11 Received message from Camera: op=State serial=349051
07:45:11 GetSingleValue result=40  Value=cccccccc
07:45:11 SkyScan query
07:45:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:45:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:11 Parameters OK
07:45:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:11 Set A/D data flow result=40
07:45:11 Set A/D channel type result=40
07:45:11 Set A/D encoding result=40
07:45:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:11 Set channel filter=0.000000e+000  result=40
07:45:11 Config A/D  Result=40
07:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:11 Get A/D filter: -9.255963e+061  result=40
07:45:11 Get A/D value=-858993460  result=40
07:45:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:11 Parameters OK
07:45:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:11 Set A/D data flow result=40
07:45:11 Set A/D channel type result=40
07:45:11 Set A/D encoding result=40
07:45:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:11 Set channel filter=0.000000e+000  result=40
07:45:11 Config A/D  Result=40
07:45:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:11 Get A/D filter: -9.255963e+061  result=40
07:45:11 Get A/D value=-858993460  result=40
07:45:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:45:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:45:11 Aux=
07:45:11 Message to Camera, serial 349051 queued
07:45:20 Received message from Master: op=Shutter serial=349061
07:45:20 Shutter LASER close
07:45:20 Received message from Master: op=PointingHead serial=349065
07:45:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:45:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:45:21 Point started: ret=0
07:45:21 point_skyscan result=0
07:45:21 Check angles
07:45:21 SkyScan query
07:45:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
07:45:22 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
07:45:22 Check angles
07:45:22 SkyScan query
07:45:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.265<-20151  Statuses=0008 0009
07:45:23 Msec=750  True Az=112.995  Ze=-122.265  Az status=0008  Ze status=0009
07:45:23 Check angles
07:45:23 SkyScan query
07:45:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.875<-18725  Statuses=0008 0009
07:45:23 Msec=1500  True Az=112.995  Ze=-100.875  Az status=0008  Ze status=0009
07:45:24 Check angles
07:45:24 SkyScan query
07:45:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.935<-17329  Statuses=0008 0009
07:45:24 Msec=2250  True Az=112.995  Ze=-79.935  Az status=0008  Ze status=0009
07:45:24 Check angles
07:45:24 SkyScan query
07:45:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.995<-15933  Statuses=0008 0009
07:45:25 Msec=3000  True Az=112.995  Ze=-58.995  Az status=0008  Ze status=0009
07:45:25 Check angles
07:45:25 SkyScan query
07:45:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
07:45:26 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
07:45:26 Check angles
07:45:26 SkyScan query
07:45:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.605<-13107  Statuses=0008 0009
07:45:26 Msec=4500  True Az=112.995  Ze=-16.605  Az status=0008  Ze status=0009
07:45:27 Check angles
07:45:27 SkyScan query
07:45:27 SkyScan query done: ret=0  az=112.995<-7533  ze=4.275<-11715  Statuses=0008 0009
07:45:27 Msec=5250  True Az=112.995  Ze=4.275  Az status=0008  Ze status=0009
07:45:27 Check angles
07:45:27 SkyScan query
07:45:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:45:28 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:45:28 Message to Master queued w/err=0: serial=349065 error=0
07:45:33 Received message from Master: op=Filter serial=349066
07:45:33 Color wheel filter change from 0 to 0
07:45:33 FLIGetFilterPos err=0  currentPosition=0
07:45:33 FLIGetStepsRemaining err=0  RemainingSteps=0
07:45:33 Filter is already there-color wheel unchanged
07:45:33 Received message from Master: op=Shutter serial=349067
07:45:33 Shutter LASER close
07:45:33 Received message from Camera: op=State serial=349069
07:45:33 GetSingleValue result=40  Value=cccccccc
07:45:33 SkyScan query
07:45:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:45:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:34 Parameters OK
07:45:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:34 Set A/D data flow result=40
07:45:34 Set A/D channel type result=40
07:45:34 Set A/D encoding result=40
07:45:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:34 Set channel filter=0.000000e+000  result=40
07:45:34 Config A/D  Result=40
07:45:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:34 Get A/D filter: -9.255963e+061  result=40
07:45:34 Get A/D value=-858993460  result=40
07:45:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:34 Parameters OK
07:45:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:34 Set A/D data flow result=40
07:45:34 Set A/D channel type result=40
07:45:34 Set A/D encoding result=40
07:45:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:34 Set channel filter=0.000000e+000  result=40
07:45:34 Config A/D  Result=40
07:45:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:34 Get A/D filter: -9.255963e+061  result=40
07:45:34 Get A/D value=-858993460  result=40
07:45:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:45:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:45:34 Aux=
07:45:34 Message to Camera, serial 349069 queued
07:46:11 Received message from Master: op=PointingHead serial=349082
07:46:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:46:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:46:11 Point started: ret=0
07:46:11 point_skyscan result=0
07:46:12 Check angles
07:46:12 SkyScan query
07:46:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:46:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:46:12 Message to Master queued w/err=0: serial=349082 error=0
07:46:17 Received message from Master: op=Filter serial=349083
07:46:17 Color wheel filter change from 0 to 0
07:46:17 FLIGetFilterPos err=0  currentPosition=0
07:46:17 FLIGetStepsRemaining err=0  RemainingSteps=0
07:46:17 Filter is already there-color wheel unchanged
07:46:18 Received message from Master: op=Shutter serial=349084
07:46:18 Shutter LASER close
07:46:18 Received message from Camera: op=State serial=349086
07:46:18 GetSingleValue result=40  Value=cccccccc
07:46:18 SkyScan query
07:46:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:46:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:46:18 Parameters OK
07:46:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:46:18 Set A/D data flow result=40
07:46:18 Set A/D channel type result=40
07:46:18 Set A/D encoding result=40
07:46:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:46:18 Set channel filter=0.000000e+000  result=40
07:46:18 Config A/D  Result=40
07:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:46:18 Get A/D filter: -9.255963e+061  result=40
07:46:18 Get A/D value=-858993460  result=40
07:46:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:46:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:46:18 Parameters OK
07:46:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:46:18 Set A/D data flow result=40
07:46:18 Set A/D channel type result=40
07:46:18 Set A/D encoding result=40
07:46:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:46:18 Set channel filter=0.000000e+000  result=40
07:46:18 Config A/D  Result=40
07:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:46:18 Get A/D filter: -9.255963e+061  result=40
07:46:18 Get A/D value=-858993460  result=40
07:46:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:46:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:46:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:46:18 Aux=
07:46:18 Message to Camera, serial 349086 queued
07:46:55 Received message from Master: op=PointingHead serial=349099
07:46:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:46:55 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:46:55 Point started: ret=0
07:46:55 point_skyscan result=0
07:46:56 Check angles
07:46:56 SkyScan query
07:46:57 SkyScan query done: ret=0  az=136.38<-9092  ze=-6.51<-12434  Statuses=0009 0008
07:46:57 Msec=0  True Az=136.38  Ze=-6.51  Az status=0009  Ze status=0008
07:46:57 Check angles
07:46:57 SkyScan query
07:46:57 SkyScan query done: ret=0  az=153.885<-10259  ze=-6.495<-12433  Statuses=0009 0008
07:46:57 Msec=750  True Az=153.885  Ze=-6.495  Az status=0009  Ze status=0008
07:46:58 Check angles
07:46:58 SkyScan query
07:46:58 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.495<-12433  Statuses=0009 0008
07:46:58 Msec=1500  True Az=171.3  Ze=-6.495  Az status=0009  Ze status=0008
07:46:58 Check angles
07:46:58 SkyScan query
07:46:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:46:59 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:46:59 Message to Master queued w/err=0: serial=349099 error=0
07:47:04 Received message from Master: op=Filter serial=349100
07:47:04 Color wheel filter change from 0 to 0
07:47:04 FLIGetFilterPos err=0  currentPosition=0
07:47:04 FLIGetStepsRemaining err=0  RemainingSteps=0
07:47:04 Filter is already there-color wheel unchanged
07:47:04 Received message from Master: op=Shutter serial=349101
07:47:04 Shutter LASER close
07:47:04 Received message from Camera: op=State serial=349103
07:47:04 GetSingleValue result=40  Value=cccccccc
07:47:04 SkyScan query
07:47:05 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:47:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:47:05 Parameters OK
07:47:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:47:05 Set A/D data flow result=40
07:47:05 Set A/D channel type result=40
07:47:05 Set A/D encoding result=40
07:47:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:47:05 Set channel filter=0.000000e+000  result=40
07:47:05 Config A/D  Result=40
07:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:47:05 Get A/D filter: -9.255963e+061  result=40
07:47:05 Get A/D value=-858993460  result=40
07:47:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:47:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:47:05 Parameters OK
07:47:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:47:05 Set A/D data flow result=40
07:47:05 Set A/D channel type result=40
07:47:05 Set A/D encoding result=40
07:47:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:47:05 Set channel filter=0.000000e+000  result=40
07:47:05 Config A/D  Result=40
07:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:47:05 Get A/D filter: -9.255963e+061  result=40
07:47:05 Get A/D value=-858993460  result=40
07:47:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:47:05 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:47:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:47:05 Aux=
07:47:05 Message to Camera, serial 349103 queued
07:47:42 Received message from Master: op=PointingHead serial=349116
07:47:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:47:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:47:42 Point started: ret=0
07:47:42 point_skyscan result=0
07:47:43 Check angles
07:47:43 SkyScan query
07:47:43 SkyScan query done: ret=0  az=152.7<-10180  ze=6.51<-11566  Statuses=0009 0008
07:47:43 Msec=0  True Az=152.7  Ze=6.51  Az status=0009  Ze status=0008
07:47:43 Check angles
07:47:43 SkyScan query
07:47:44 SkyScan query done: ret=0  az=135.285<-9019  ze=6.495<-11567  Statuses=0009 0008
07:47:44 Msec=750  True Az=135.285  Ze=6.495  Az status=0009  Ze status=0008
07:47:44 Check angles
07:47:44 SkyScan query
07:47:45 SkyScan query done: ret=0  az=117.885<-7859  ze=6.495<-11567  Statuses=0009 0008
07:47:45 Msec=1500  True Az=117.885  Ze=6.495  Az status=0009  Ze status=0008
07:47:45 Check angles
07:47:45 SkyScan query
07:47:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:47:46 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:47:46 Message to Master queued w/err=0: serial=349116 error=0
07:47:51 Received message from Master: op=Filter serial=349117
07:47:51 Color wheel filter change from 0 to 0
07:47:51 FLIGetFilterPos err=0  currentPosition=0
07:47:51 FLIGetStepsRemaining err=0  RemainingSteps=0
07:47:51 Filter is already there-color wheel unchanged
07:47:51 Received message from Master: op=Shutter serial=349118
07:47:51 Shutter LASER close
07:47:51 Received message from Camera: op=State serial=349120
07:47:51 GetSingleValue result=40  Value=cccccccc
07:47:51 SkyScan query
07:47:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:47:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:47:51 Parameters OK
07:47:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:47:51 Set A/D data flow result=40
07:47:51 Set A/D channel type result=40
07:47:51 Set A/D encoding result=40
07:47:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:47:51 Set channel filter=0.000000e+000  result=40
07:47:51 Config A/D  Result=40
07:47:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:47:51 Get A/D filter: -9.255963e+061  result=40
07:47:51 Get A/D value=-858993460  result=40
07:47:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:47:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:47:51 Parameters OK
07:47:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:47:51 Set A/D data flow result=40
07:47:51 Set A/D channel type result=40
07:47:51 Set A/D encoding result=40
07:47:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:47:51 Set channel filter=0.000000e+000  result=40
07:47:51 Config A/D  Result=40
07:47:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:47:51 Get A/D filter: -9.255963e+061  result=40
07:47:51 Get A/D value=-858993460  result=40
07:47:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:47:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:47:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:47:51 Aux=
07:47:51 Message to Camera, serial 349120 queued
07:48:28 Received message from Master: op=PointingHead serial=349133
07:48:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:48:28 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:48:29 Point started: ret=0
07:48:29 point_skyscan result=0
07:48:29 Check angles
07:48:29 SkyScan query
07:48:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.19<-13546  Statuses=0008 0009
07:48:30 Msec=0  True Az=112.995  Ze=-23.19  Az status=0008  Ze status=0009
07:48:30 Check angles
07:48:30 SkyScan query
07:48:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.16<-14944  Statuses=0008 0009
07:48:31 Msec=750  True Az=112.995  Ze=-44.16  Az status=0008  Ze status=0009
07:48:31 Check angles
07:48:31 SkyScan query
07:48:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.115<-16341  Statuses=0008 0009
07:48:31 Msec=1500  True Az=112.995  Ze=-65.115  Az status=0008  Ze status=0009
07:48:32 Check angles
07:48:32 SkyScan query
07:48:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.07<-17738  Statuses=0008 0009
07:48:32 Msec=2250  True Az=112.995  Ze=-86.07  Az status=0008  Ze status=0009
07:48:32 Check angles
07:48:32 SkyScan query
07:48:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.01<-19134  Statuses=0008 0009
07:48:33 Msec=3000  True Az=112.995  Ze=-107.01  Az status=0008  Ze status=0009
07:48:33 Check angles
07:48:33 SkyScan query
07:48:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.965<-20531  Statuses=0008 0009
07:48:34 Msec=3750  True Az=112.995  Ze=-127.965  Az status=0008  Ze status=0009
07:48:34 Check angles
07:48:34 SkyScan query
07:48:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.95<-21930  Statuses=0008 0009
07:48:34 Msec=4500  True Az=112.995  Ze=-148.95  Az status=0008  Ze status=0009
07:48:35 Check angles
07:48:35 SkyScan query
07:48:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.295<-23353  Statuses=0008 0009
07:48:35 Msec=5250  True Az=112.995  Ze=-170.295  Az status=0008  Ze status=0009
07:48:35 Check angles
07:48:35 SkyScan query
07:48:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:48:36 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:48:36 Message to Master queued w/err=0: serial=349133 error=0
07:48:41 Received message from Master: op=Filter serial=349134
07:48:41 Color wheel filter change from 0 to 0
07:48:41 FLIGetFilterPos err=0  currentPosition=0
07:48:41 FLIGetStepsRemaining err=0  RemainingSteps=0
07:48:41 Filter is already there-color wheel unchanged
07:48:41 Received message from Master: op=Shutter serial=349135
07:48:41 Shutter LASER open
07:48:41 Received message from Camera: op=State serial=349137
07:48:41 GetSingleValue result=40  Value=cccccccc
07:48:41 SkyScan query
07:48:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:48:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:48:42 Parameters OK
07:48:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:48:42 Set A/D data flow result=40
07:48:42 Set A/D channel type result=40
07:48:42 Set A/D encoding result=40
07:48:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:48:42 Set channel filter=0.000000e+000  result=40
07:48:42 Config A/D  Result=40
07:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:48:42 Get A/D filter: -9.255963e+061  result=40
07:48:42 Get A/D value=-858993460  result=40
07:48:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:48:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:48:42 Parameters OK
07:48:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:48:42 Set A/D data flow result=40
07:48:42 Set A/D channel type result=40
07:48:42 Set A/D encoding result=40
07:48:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:48:42 Set channel filter=0.000000e+000  result=40
07:48:42 Config A/D  Result=40
07:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:48:42 Get A/D filter: -9.255963e+061  result=40
07:48:42 Get A/D value=-858993460  result=40
07:48:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:48:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:48:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:48:42 Aux=
07:48:42 Message to Camera, serial 349137 queued
07:48:49 Received message from Master: op=Shutter serial=349146
07:48:49 Shutter LASER close
07:48:50 Received message from Master: op=PointingHead serial=349150
07:48:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:48:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:48:50 Point started: ret=0
07:48:50 point_skyscan result=0
07:48:51 Check angles
07:48:51 SkyScan query
07:48:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
07:48:51 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
07:48:52 Check angles
07:48:52 SkyScan query
07:48:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.65<-20110  Statuses=0008 0009
07:48:52 Msec=750  True Az=112.995  Ze=-121.65  Az status=0008  Ze status=0009
07:48:52 Check angles
07:48:52 SkyScan query
07:48:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.275<-18685  Statuses=0008 0009
07:48:53 Msec=1500  True Az=112.995  Ze=-100.275  Az status=0008  Ze status=0009
07:48:53 Check angles
07:48:53 SkyScan query
07:48:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.305<-17287  Statuses=0008 0009
07:48:54 Msec=2250  True Az=112.995  Ze=-79.305  Az status=0008  Ze status=0009
07:48:54 Check angles
07:48:54 SkyScan query
07:48:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.35<-15890  Statuses=0008 0009
07:48:54 Msec=3000  True Az=112.995  Ze=-58.35  Az status=0008  Ze status=0009
07:48:55 Check angles
07:48:55 SkyScan query
07:48:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.425<-14495  Statuses=0008 0009
07:48:55 Msec=3750  True Az=112.995  Ze=-37.425  Az status=0008  Ze status=0009
07:48:55 Check angles
07:48:55 SkyScan query
07:48:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.44<-13096  Statuses=0008 0009
07:48:56 Msec=4500  True Az=112.995  Ze=-16.44  Az status=0008  Ze status=0009
07:48:56 Check angles
07:48:56 SkyScan query
07:48:57 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
07:48:57 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
07:48:57 Check angles
07:48:57 SkyScan query
07:48:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:48:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:48:57 Message to Master queued w/err=0: serial=349150 error=0
07:49:02 Received message from Master: op=Filter serial=349151
07:49:02 Color wheel filter change from 0 to 0
07:49:02 FLIGetFilterPos err=0  currentPosition=0
07:49:02 FLIGetStepsRemaining err=0  RemainingSteps=0
07:49:02 Filter is already there-color wheel unchanged
07:49:03 Received message from Master: op=Shutter serial=349152
07:49:03 Shutter LASER close
07:49:03 Received message from Camera: op=State serial=349154
07:49:03 GetSingleValue result=40  Value=cccccccc
07:49:03 SkyScan query
07:49:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:49:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:49:03 Parameters OK
07:49:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:49:03 Set A/D data flow result=40
07:49:03 Set A/D channel type result=40
07:49:03 Set A/D encoding result=40
07:49:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:49:03 Set channel filter=0.000000e+000  result=40
07:49:03 Config A/D  Result=40
07:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:49:03 Get A/D filter: -9.255963e+061  result=40
07:49:03 Get A/D value=-858993460  result=40
07:49:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:49:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:49:03 Parameters OK
07:49:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:49:03 Set A/D data flow result=40
07:49:03 Set A/D channel type result=40
07:49:03 Set A/D encoding result=40
07:49:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:49:03 Set channel filter=0.000000e+000  result=40
07:49:03 Config A/D  Result=40
07:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:49:03 Get A/D filter: -9.255963e+061  result=40
07:49:03 Get A/D value=-858993460  result=40
07:49:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:49:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:49:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:49:03 Aux=
07:49:03 Message to Camera, serial 349154 queued
07:49:40 Received message from Master: op=PointingHead serial=349167
07:49:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:49:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:49:41 Point started: ret=0
07:49:41 point_skyscan result=0
07:49:41 Check angles
07:49:41 SkyScan query
07:49:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:49:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:49:42 Message to Master queued w/err=0: serial=349167 error=0
07:49:47 Received message from Master: op=Filter serial=349168
07:49:47 Color wheel filter change from 0 to 0
07:49:47 FLIGetFilterPos err=0  currentPosition=0
07:49:47 FLIGetStepsRemaining err=0  RemainingSteps=0
07:49:47 Filter is already there-color wheel unchanged
07:49:47 Received message from Master: op=Shutter serial=349169
07:49:47 Shutter LASER close
07:49:47 Received message from Camera: op=State serial=349171
07:49:47 GetSingleValue result=40  Value=cccccccc
07:49:47 SkyScan query
07:49:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:49:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:49:48 Parameters OK
07:49:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:49:48 Set A/D data flow result=40
07:49:48 Set A/D channel type result=40
07:49:48 Set A/D encoding result=40
07:49:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:49:48 Set channel filter=0.000000e+000  result=40
07:49:48 Config A/D  Result=40
07:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:49:48 Get A/D filter: -9.255963e+061  result=40
07:49:48 Get A/D value=-858993460  result=40
07:49:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:49:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:49:48 Parameters OK
07:49:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:49:48 Set A/D data flow result=40
07:49:48 Set A/D channel type result=40
07:49:48 Set A/D encoding result=40
07:49:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:49:48 Set channel filter=0.000000e+000  result=40
07:49:48 Config A/D  Result=40
07:49:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:49:48 Get A/D filter: -9.255963e+061  result=40
07:49:48 Get A/D value=-858993460  result=40
07:49:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:49:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:49:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:49:48 Aux=
07:49:48 Message to Camera, serial 349171 queued
07:50:25 Received message from Master: op=PointingHead serial=349184
07:50:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:50:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:50:25 Point started: ret=0
07:50:25 point_skyscan result=0
07:50:26 Check angles
07:50:26 SkyScan query
07:50:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:50:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:50:26 Message to Master queued w/err=0: serial=349184 error=0
07:50:31 Received message from Master: op=Filter serial=349185
07:50:31 Color wheel filter change from 0 to 0
07:50:31 FLIGetFilterPos err=0  currentPosition=0
07:50:31 FLIGetStepsRemaining err=0  RemainingSteps=0
07:50:31 Filter is already there-color wheel unchanged
07:50:31 Received message from Master: op=Shutter serial=349186
07:50:31 Shutter LASER close
07:50:31 Received message from Camera: op=State serial=349188
07:50:31 GetSingleValue result=40  Value=cccccccc
07:50:31 SkyScan query
07:50:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:50:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:50:32 Parameters OK
07:50:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:50:32 Set A/D data flow result=40
07:50:32 Set A/D channel type result=40
07:50:32 Set A/D encoding result=40
07:50:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:50:32 Set channel filter=0.000000e+000  result=40
07:50:32 Config A/D  Result=40
07:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:50:32 Get A/D filter: -9.255963e+061  result=40
07:50:32 Get A/D value=-858993460  result=40
07:50:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:50:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:50:32 Parameters OK
07:50:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:50:32 Set A/D data flow result=40
07:50:32 Set A/D channel type result=40
07:50:32 Set A/D encoding result=40
07:50:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:50:32 Set channel filter=0.000000e+000  result=40
07:50:32 Config A/D  Result=40
07:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:50:32 Get A/D filter: -9.255963e+061  result=40
07:50:32 Get A/D value=-858993460  result=40
07:50:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:50:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:50:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:50:32 Aux=
07:50:32 Message to Camera, serial 349188 queued
07:51:09 Received message from Master: op=PointingHead serial=349201
07:51:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:51:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:51:09 Point started: ret=0
07:51:09 point_skyscan result=0
07:51:10 Check angles
07:51:10 SkyScan query
07:51:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:51:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:51:10 Message to Master queued w/err=0: serial=349201 error=0
07:51:15 Received message from Master: op=Filter serial=349202
07:51:15 Color wheel filter change from 0 to 0
07:51:15 FLIGetFilterPos err=0  currentPosition=0
07:51:15 FLIGetStepsRemaining err=0  RemainingSteps=0
07:51:15 Filter is already there-color wheel unchanged
07:51:16 Received message from Master: op=Shutter serial=349203
07:51:16 Shutter LASER close
07:51:16 Received message from Camera: op=State serial=349205
07:51:16 GetSingleValue result=40  Value=cccccccc
07:51:16 SkyScan query
07:51:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:51:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:51:16 Parameters OK
07:51:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:51:16 Set A/D data flow result=40
07:51:16 Set A/D channel type result=40
07:51:16 Set A/D encoding result=40
07:51:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:51:16 Set channel filter=0.000000e+000  result=40
07:51:16 Config A/D  Result=40
07:51:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:51:16 Get A/D filter: -9.255963e+061  result=40
07:51:16 Get A/D value=-858993460  result=40
07:51:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:51:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:51:16 Parameters OK
07:51:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:51:16 Set A/D data flow result=40
07:51:16 Set A/D channel type result=40
07:51:16 Set A/D encoding result=40
07:51:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:51:16 Set channel filter=0.000000e+000  result=40
07:51:16 Config A/D  Result=40
07:51:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:51:16 Get A/D filter: -9.255963e+061  result=40
07:51:16 Get A/D value=-858993460  result=40
07:51:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:51:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:51:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:51:16 Aux=
07:51:16 Message to Camera, serial 349205 queued
07:51:53 Received message from Master: op=PointingHead serial=349218
07:51:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:51:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:51:53 Point started: ret=0
07:51:53 point_skyscan result=0
07:51:54 Check angles
07:51:54 SkyScan query
07:51:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
07:51:55 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
07:51:55 Check angles
07:51:55 SkyScan query
07:51:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
07:51:56 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
07:51:56 Check angles
07:51:56 SkyScan query
07:51:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.355<-16357  Statuses=0008 0009
07:51:56 Msec=1500  True Az=112.995  Ze=-65.355  Az status=0008  Ze status=0009
07:51:56 Check angles
07:51:56 SkyScan query
07:51:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
07:51:57 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
07:51:57 Check angles
07:51:57 SkyScan query
07:51:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.205<-19147  Statuses=0008 0009
07:51:58 Msec=3000  True Az=112.995  Ze=-107.205  Az status=0008  Ze status=0009
07:51:58 Check angles
07:51:58 SkyScan query
07:51:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.145<-20543  Statuses=0008 0009
07:51:59 Msec=3750  True Az=112.995  Ze=-128.145  Az status=0008  Ze status=0009
07:51:59 Check angles
07:51:59 SkyScan query
07:51:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.115<-21941  Statuses=0008 0009
07:51:59 Msec=4500  True Az=112.995  Ze=-149.115  Az status=0008  Ze status=0009
07:51:59 Check angles
07:51:59 SkyScan query
07:52:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.055<-23337  Statuses=0008 0009
07:52:00 Msec=5250  True Az=112.995  Ze=-170.055  Az status=0008  Ze status=0009
07:52:00 Check angles
07:52:00 SkyScan query
07:52:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:52:01 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:52:01 Message to Master queued w/err=0: serial=349218 error=0
07:52:06 Received message from Master: op=Filter serial=349219
07:52:06 Color wheel filter change from 0 to 0
07:52:06 FLIGetFilterPos err=0  currentPosition=0
07:52:06 FLIGetStepsRemaining err=0  RemainingSteps=0
07:52:06 Filter is already there-color wheel unchanged
07:52:06 Received message from Master: op=Shutter serial=349220
07:52:06 Shutter LASER open
07:52:06 Received message from Camera: op=State serial=349222
07:52:06 GetSingleValue result=40  Value=cccccccc
07:52:06 SkyScan query
07:52:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:52:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:07 Parameters OK
07:52:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:07 Set A/D data flow result=40
07:52:07 Set A/D channel type result=40
07:52:07 Set A/D encoding result=40
07:52:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:07 Set channel filter=0.000000e+000  result=40
07:52:07 Config A/D  Result=40
07:52:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:07 Get A/D filter: -9.255963e+061  result=40
07:52:07 Get A/D value=-858993460  result=40
07:52:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:07 Parameters OK
07:52:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:07 Set A/D data flow result=40
07:52:07 Set A/D channel type result=40
07:52:07 Set A/D encoding result=40
07:52:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:07 Set channel filter=0.000000e+000  result=40
07:52:07 Config A/D  Result=40
07:52:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:07 Get A/D filter: -9.255963e+061  result=40
07:52:07 Get A/D value=-858993460  result=40
07:52:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:52:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:52:07 Aux=
07:52:07 Message to Camera, serial 349222 queued
07:52:15 Received message from Master: op=Shutter serial=349232
07:52:15 Shutter LASER close
07:52:16 Received message from Master: op=PointingHead serial=349236
07:52:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:52:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:52:16 Point started: ret=0
07:52:16 point_skyscan result=0
07:52:17 Check angles
07:52:17 SkyScan query
07:52:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
07:52:17 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
07:52:18 Check angles
07:52:18 SkyScan query
07:52:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.755<-20117  Statuses=0008 0009
07:52:18 Msec=750  True Az=112.995  Ze=-121.755  Az status=0008  Ze status=0009
07:52:18 Check angles
07:52:18 SkyScan query
07:52:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.395<-18693  Statuses=0008 0009
07:52:19 Msec=1500  True Az=112.995  Ze=-100.395  Az status=0008  Ze status=0009
07:52:19 Check angles
07:52:19 SkyScan query
07:52:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.425<-17295  Statuses=0008 0009
07:52:20 Msec=2250  True Az=112.995  Ze=-79.425  Az status=0008  Ze status=0009
07:52:20 Check angles
07:52:20 SkyScan query
07:52:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.47<-15898  Statuses=0008 0009
07:52:20 Msec=3000  True Az=112.995  Ze=-58.47  Az status=0008  Ze status=0009
07:52:21 Check angles
07:52:21 SkyScan query
07:52:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.545<-14503  Statuses=0008 0009
07:52:21 Msec=3750  True Az=112.995  Ze=-37.545  Az status=0008  Ze status=0009
07:52:21 Check angles
07:52:21 SkyScan query
07:52:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
07:52:22 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
07:52:22 Check angles
07:52:22 SkyScan query
07:52:23 SkyScan query done: ret=0  az=112.995<-7533  ze=4.635<-11691  Statuses=0008 0009
07:52:23 Msec=5250  True Az=112.995  Ze=4.635  Az status=0008  Ze status=0009
07:52:23 Check angles
07:52:23 SkyScan query
07:52:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:52:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:52:23 Message to Master queued w/err=0: serial=349236 error=0
07:52:28 Received message from Master: op=Filter serial=349237
07:52:28 Color wheel filter change from 0 to 0
07:52:28 FLIGetFilterPos err=0  currentPosition=0
07:52:28 FLIGetStepsRemaining err=0  RemainingSteps=0
07:52:28 Filter is already there-color wheel unchanged
07:52:29 Received message from Master: op=Shutter serial=349238
07:52:29 Shutter LASER close
07:52:29 Received message from Camera: op=State serial=349240
07:52:29 GetSingleValue result=40  Value=cccccccc
07:52:29 SkyScan query
07:52:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:52:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:29 Parameters OK
07:52:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:29 Set A/D data flow result=40
07:52:29 Set A/D channel type result=40
07:52:29 Set A/D encoding result=40
07:52:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:29 Set channel filter=0.000000e+000  result=40
07:52:29 Config A/D  Result=40
07:52:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:29 Get A/D filter: -9.255963e+061  result=40
07:52:29 Get A/D value=-858993460  result=40
07:52:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:29 Parameters OK
07:52:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:29 Set A/D data flow result=40
07:52:29 Set A/D channel type result=40
07:52:29 Set A/D encoding result=40
07:52:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:29 Set channel filter=0.000000e+000  result=40
07:52:29 Config A/D  Result=40
07:52:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:29 Get A/D filter: -9.255963e+061  result=40
07:52:29 Get A/D value=-858993460  result=40
07:52:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:52:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:52:29 Aux=
07:52:29 Message to Camera, serial 349240 queued
07:53:06 Received message from Master: op=PointingHead serial=349253
07:53:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:53:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:53:07 Point started: ret=0
07:53:07 point_skyscan result=0
07:53:07 Check angles
07:53:07 SkyScan query
07:53:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:53:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:53:08 Message to Master queued w/err=0: serial=349253 error=0
07:53:13 Received message from Master: op=Filter serial=349254
07:53:13 Color wheel filter change from 0 to 0
07:53:13 FLIGetFilterPos err=0  currentPosition=0
07:53:13 FLIGetStepsRemaining err=0  RemainingSteps=0
07:53:13 Filter is already there-color wheel unchanged
07:53:13 Received message from Master: op=Shutter serial=349255
07:53:13 Shutter LASER close
07:53:13 Received message from Camera: op=State serial=349257
07:53:13 GetSingleValue result=40  Value=cccccccc
07:53:13 SkyScan query
07:53:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:53:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:53:14 Parameters OK
07:53:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:53:14 Set A/D data flow result=40
07:53:14 Set A/D channel type result=40
07:53:14 Set A/D encoding result=40
07:53:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:53:14 Set channel filter=0.000000e+000  result=40
07:53:14 Config A/D  Result=40
07:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:53:14 Get A/D filter: -9.255963e+061  result=40
07:53:14 Get A/D value=-858993460  result=40
07:53:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:53:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:53:14 Parameters OK
07:53:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:53:14 Set A/D data flow result=40
07:53:14 Set A/D channel type result=40
07:53:14 Set A/D encoding result=40
07:53:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:53:14 Set channel filter=0.000000e+000  result=40
07:53:14 Config A/D  Result=40
07:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:53:14 Get A/D filter: -9.255963e+061  result=40
07:53:14 Get A/D value=-858993460  result=40
07:53:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:53:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:53:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:53:14 Aux=
07:53:14 Message to Camera, serial 349257 queued
07:53:51 Received message from Master: op=PointingHead serial=349270
07:53:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:53:51 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:53:51 Point started: ret=0
07:53:51 point_skyscan result=0
07:53:52 Check angles
07:53:52 SkyScan query
07:53:52 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
07:53:52 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
07:53:52 Check angles
07:53:52 SkyScan query
07:53:53 SkyScan query done: ret=0  az=153.525<-10235  ze=-6.495<-12433  Statuses=0009 0008
07:53:53 Msec=750  True Az=153.525  Ze=-6.495  Az status=0009  Ze status=0008
07:53:53 Check angles
07:53:53 SkyScan query
07:53:54 SkyScan query done: ret=0  az=171.36<-11424  ze=-6.495<-12433  Statuses=0009 0008
07:53:54 Msec=1500  True Az=171.36  Ze=-6.495  Az status=0009  Ze status=0008
07:53:54 Check angles
07:53:54 SkyScan query
07:53:54 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:53:54 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:53:54 Message to Master queued w/err=0: serial=349270 error=0
07:53:59 Received message from Master: op=Filter serial=349271
07:53:59 Color wheel filter change from 0 to 0
07:53:59 FLIGetFilterPos err=0  currentPosition=0
07:53:59 FLIGetStepsRemaining err=0  RemainingSteps=0
07:53:59 Filter is already there-color wheel unchanged
07:54:00 Received message from Master: op=Shutter serial=349272
07:54:00 Shutter LASER close
07:54:00 Received message from Camera: op=State serial=349274
07:54:00 GetSingleValue result=40  Value=cccccccc
07:54:00 SkyScan query
07:54:00 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:54:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:54:00 Parameters OK
07:54:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:54:00 Set A/D data flow result=40
07:54:00 Set A/D channel type result=40
07:54:00 Set A/D encoding result=40
07:54:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:54:00 Set channel filter=0.000000e+000  result=40
07:54:00 Config A/D  Result=40
07:54:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:54:00 Get A/D filter: -9.255963e+061  result=40
07:54:00 Get A/D value=-858993460  result=40
07:54:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:54:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:54:00 Parameters OK
07:54:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:54:00 Set A/D data flow result=40
07:54:00 Set A/D channel type result=40
07:54:00 Set A/D encoding result=40
07:54:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:54:00 Set channel filter=0.000000e+000  result=40
07:54:00 Config A/D  Result=40
07:54:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:54:00 Get A/D filter: -9.255963e+061  result=40
07:54:00 Get A/D value=-858993460  result=40
07:54:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:54:00 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:54:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:54:00 Aux=
07:54:00 Message to Camera, serial 349274 queued
[UTC 2019-3-19  07:54:37]
07:54:37 Received message from Master: op=PointingHead serial=349287
07:54:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:54:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:54:38 Point started: ret=0
07:54:38 point_skyscan result=0
07:54:38 Check angles
07:54:38 SkyScan query
07:54:39 SkyScan query done: ret=0  az=152.7<-10180  ze=6.51<-11566  Statuses=0009 0008
07:54:39 Msec=0  True Az=152.7  Ze=6.51  Az status=0009  Ze status=0008
07:54:39 Check angles
07:54:39 SkyScan query
07:54:40 SkyScan query done: ret=0  az=135.195<-9013  ze=6.495<-11567  Statuses=0009 0008
07:54:40 Msec=750  True Az=135.195  Ze=6.495  Az status=0009  Ze status=0008
07:54:40 Check angles
07:54:40 SkyScan query
07:54:40 SkyScan query done: ret=0  az=117.795<-7853  ze=6.495<-11567  Statuses=0009 0008
07:54:40 Msec=1500  True Az=117.795  Ze=6.495  Az status=0009  Ze status=0008
07:54:41 Check angles
07:54:41 SkyScan query
07:54:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:54:41 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:54:41 Message to Master queued w/err=0: serial=349287 error=0
07:54:46 Received message from Master: op=Filter serial=349288
07:54:46 Color wheel filter change from 0 to 0
07:54:46 FLIGetFilterPos err=0  currentPosition=0
07:54:46 FLIGetStepsRemaining err=0  RemainingSteps=0
07:54:46 Filter is already there-color wheel unchanged
07:54:46 Received message from Master: op=Shutter serial=349289
07:54:46 Shutter LASER close
07:54:46 Received message from Camera: op=State serial=349291
07:54:46 GetSingleValue result=40  Value=cccccccc
07:54:46 SkyScan query
07:54:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:54:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:54:47 Parameters OK
07:54:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:54:47 Set A/D data flow result=40
07:54:47 Set A/D channel type result=40
07:54:47 Set A/D encoding result=40
07:54:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:54:47 Set channel filter=0.000000e+000  result=40
07:54:47 Config A/D  Result=40
07:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:54:47 Get A/D filter: -9.255963e+061  result=40
07:54:47 Get A/D value=-858993460  result=40
07:54:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:54:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:54:47 Parameters OK
07:54:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:54:47 Set A/D data flow result=40
07:54:47 Set A/D channel type result=40
07:54:47 Set A/D encoding result=40
07:54:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:54:47 Set channel filter=0.000000e+000  result=40
07:54:47 Config A/D  Result=40
07:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:54:47 Get A/D filter: -9.255963e+061  result=40
07:54:47 Get A/D value=-858993460  result=40
07:54:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:54:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:54:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:54:47 Aux=
07:54:47 Message to Camera, serial 349291 queued
07:55:24 Received message from Master: op=PointingHead serial=349304
07:55:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:55:24 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:55:24 Point started: ret=0
07:55:24 point_skyscan result=0
07:55:25 Check angles
07:55:25 SkyScan query
07:55:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.85<-13590  Statuses=0008 0009
07:55:25 Msec=0  True Az=112.995  Ze=-23.85  Az status=0008  Ze status=0009
07:55:26 Check angles
07:55:26 SkyScan query
07:55:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.24<-15016  Statuses=0008 0009
07:55:26 Msec=750  True Az=112.995  Ze=-45.24  Az status=0008  Ze status=0009
07:55:26 Check angles
07:55:26 SkyScan query
07:55:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.63<-16442  Statuses=0008 0009
07:55:27 Msec=1500  True Az=112.995  Ze=-66.63  Az status=0008  Ze status=0009
07:55:27 Check angles
07:55:27 SkyScan query
07:55:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.585<-17839  Statuses=0008 0009
07:55:28 Msec=2250  True Az=112.995  Ze=-87.585  Az status=0008  Ze status=0009
07:55:28 Check angles
07:55:28 SkyScan query
07:55:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.51<-19234  Statuses=0008 0009
07:55:28 Msec=3000  True Az=112.995  Ze=-108.51  Az status=0008  Ze status=0009
07:55:29 Check angles
07:55:29 SkyScan query
07:55:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.48<-20632  Statuses=0008 0009
07:55:29 Msec=3750  True Az=112.995  Ze=-129.48  Az status=0008  Ze status=0009
07:55:29 Check angles
07:55:29 SkyScan query
07:55:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.45<-22030  Statuses=0008 0009
07:55:30 Msec=4500  True Az=112.995  Ze=-150.45  Az status=0008  Ze status=0009
07:55:30 Check angles
07:55:30 SkyScan query
07:55:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.525<-23435  Statuses=0008 0009
07:55:31 Msec=5250  True Az=112.995  Ze=-171.525  Az status=0008  Ze status=0009
07:55:31 Check angles
07:55:31 SkyScan query
07:55:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:55:31 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:55:31 Message to Master queued w/err=0: serial=349304 error=0
07:55:36 Received message from Master: op=Filter serial=349305
07:55:36 Color wheel filter change from 0 to 0
07:55:36 FLIGetFilterPos err=0  currentPosition=0
07:55:36 FLIGetStepsRemaining err=0  RemainingSteps=0
07:55:36 Filter is already there-color wheel unchanged
07:55:37 Received message from Master: op=Shutter serial=349306
07:55:37 Shutter LASER open
07:55:37 Received message from Camera: op=State serial=349308
07:55:37 GetSingleValue result=40  Value=cccccccc
07:55:37 SkyScan query
07:55:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:55:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:55:37 Parameters OK
07:55:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:55:37 Set A/D data flow result=40
07:55:37 Set A/D channel type result=40
07:55:37 Set A/D encoding result=40
07:55:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:55:37 Set channel filter=0.000000e+000  result=40
07:55:37 Config A/D  Result=40
07:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:55:37 Get A/D filter: -9.255963e+061  result=40
07:55:37 Get A/D value=-858993460  result=40
07:55:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:55:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:55:37 Parameters OK
07:55:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:55:37 Set A/D data flow result=40
07:55:37 Set A/D channel type result=40
07:55:37 Set A/D encoding result=40
07:55:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:55:37 Set channel filter=0.000000e+000  result=40
07:55:37 Config A/D  Result=40
07:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:55:37 Get A/D filter: -9.255963e+061  result=40
07:55:37 Get A/D value=-858993460  result=40
07:55:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:55:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:55:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:55:37 Aux=
07:55:37 Message to Camera, serial 349308 queued
07:55:46 Received message from Master: op=Shutter serial=349318
07:55:46 Shutter LASER close
07:55:46 Received message from Master: op=PointingHead serial=349322
07:55:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:55:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:55:47 Point started: ret=0
07:55:47 point_skyscan result=0
07:55:47 Check angles
07:55:47 SkyScan query
07:55:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
07:55:48 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
07:55:48 Check angles
07:55:48 SkyScan query
07:55:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.8<-20120  Statuses=0008 0009
07:55:49 Msec=750  True Az=112.995  Ze=-121.8  Az status=0008  Ze status=0009
07:55:49 Check angles
07:55:49 SkyScan query
07:55:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.425<-18695  Statuses=0008 0009
07:55:49 Msec=1500  True Az=112.995  Ze=-100.425  Az status=0008  Ze status=0009
07:55:50 Check angles
07:55:50 SkyScan query
07:55:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
07:55:50 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
07:55:50 Check angles
07:55:50 SkyScan query
07:55:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
07:55:51 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
07:55:51 Check angles
07:55:51 SkyScan query
07:55:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.575<-14505  Statuses=0008 0009
07:55:52 Msec=3750  True Az=112.995  Ze=-37.575  Az status=0008  Ze status=0009
07:55:52 Check angles
07:55:52 SkyScan query
07:55:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
07:55:52 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
07:55:53 Check angles
07:55:53 SkyScan query
07:55:53 SkyScan query done: ret=0  az=112.995<-7533  ze=4.635<-11691  Statuses=0008 0009
07:55:53 Msec=5250  True Az=112.995  Ze=4.635  Az status=0008  Ze status=0009
07:55:53 Check angles
07:55:53 SkyScan query
07:55:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:55:54 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:55:54 Message to Master queued w/err=0: serial=349322 error=0
07:55:59 Received message from Master: op=Filter serial=349323
07:55:59 Color wheel filter change from 0 to 0
07:55:59 FLIGetFilterPos err=0  currentPosition=0
07:55:59 FLIGetStepsRemaining err=0  RemainingSteps=0
07:55:59 Filter is already there-color wheel unchanged
07:55:59 Received message from Master: op=Shutter serial=349324
07:55:59 Shutter LASER close
07:55:59 Received message from Camera: op=State serial=349326
07:55:59 GetSingleValue result=40  Value=cccccccc
07:55:59 SkyScan query
07:56:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:56:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:00 Parameters OK
07:56:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:00 Set A/D data flow result=40
07:56:00 Set A/D channel type result=40
07:56:00 Set A/D encoding result=40
07:56:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:00 Set channel filter=0.000000e+000  result=40
07:56:00 Config A/D  Result=40
07:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:00 Get A/D filter: -9.255963e+061  result=40
07:56:00 Get A/D value=-858993460  result=40
07:56:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:00 Parameters OK
07:56:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:00 Set A/D data flow result=40
07:56:00 Set A/D channel type result=40
07:56:00 Set A/D encoding result=40
07:56:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:00 Set channel filter=0.000000e+000  result=40
07:56:00 Config A/D  Result=40
07:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:00 Get A/D filter: -9.255963e+061  result=40
07:56:00 Get A/D value=-858993460  result=40
07:56:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:56:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:56:00 Aux=
07:56:00 Message to Camera, serial 349326 queued
07:56:37 Received message from Master: op=PointingHead serial=349339
07:56:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:56:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:56:37 Point started: ret=0
07:56:37 point_skyscan result=0
07:56:38 Check angles
07:56:38 SkyScan query
07:56:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:56:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:56:38 Message to Master queued w/err=0: serial=349339 error=0
07:56:43 Received message from Master: op=Filter serial=349340
07:56:43 Color wheel filter change from 0 to 0
07:56:43 FLIGetFilterPos err=0  currentPosition=0
07:56:43 FLIGetStepsRemaining err=0  RemainingSteps=0
07:56:43 Filter is already there-color wheel unchanged
07:56:44 Received message from Master: op=Shutter serial=349341
07:56:44 Shutter LASER close
07:56:44 Received message from Camera: op=State serial=349343
07:56:44 GetSingleValue result=40  Value=cccccccc
07:56:44 SkyScan query
07:56:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:56:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:44 Parameters OK
07:56:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:44 Set A/D data flow result=40
07:56:44 Set A/D channel type result=40
07:56:44 Set A/D encoding result=40
07:56:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:44 Set channel filter=0.000000e+000  result=40
07:56:44 Config A/D  Result=40
07:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:44 Get A/D filter: -9.255963e+061  result=40
07:56:44 Get A/D value=-858993460  result=40
07:56:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:44 Parameters OK
07:56:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:44 Set A/D data flow result=40
07:56:44 Set A/D channel type result=40
07:56:44 Set A/D encoding result=40
07:56:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:44 Set channel filter=0.000000e+000  result=40
07:56:44 Config A/D  Result=40
07:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:44 Get A/D filter: -9.255963e+061  result=40
07:56:44 Get A/D value=-858993460  result=40
07:56:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:56:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:56:44 Aux=
07:56:44 Message to Camera, serial 349343 queued
07:57:21 Received message from Master: op=PointingHead serial=349356
07:57:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:57:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:57:21 Point started: ret=0
07:57:21 point_skyscan result=0
07:57:22 Check angles
07:57:22 SkyScan query
07:57:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:57:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:57:23 Message to Master queued w/err=0: serial=349356 error=0
07:57:28 Received message from Master: op=Filter serial=349357
07:57:28 Color wheel filter change from 0 to 0
07:57:28 FLIGetFilterPos err=0  currentPosition=0
07:57:28 FLIGetStepsRemaining err=0  RemainingSteps=0
07:57:28 Filter is already there-color wheel unchanged
07:57:28 Received message from Master: op=Shutter serial=349358
07:57:28 Shutter LASER close
07:57:28 Received message from Camera: op=State serial=349360
07:57:28 GetSingleValue result=40  Value=cccccccc
07:57:28 SkyScan query
07:57:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:57:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:57:28 Parameters OK
07:57:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:57:28 Set A/D data flow result=40
07:57:28 Set A/D channel type result=40
07:57:28 Set A/D encoding result=40
07:57:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:57:28 Set channel filter=0.000000e+000  result=40
07:57:28 Config A/D  Result=40
07:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:57:28 Get A/D filter: -9.255963e+061  result=40
07:57:28 Get A/D value=-858993460  result=40
07:57:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:57:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:57:28 Parameters OK
07:57:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:57:28 Set A/D data flow result=40
07:57:28 Set A/D channel type result=40
07:57:28 Set A/D encoding result=40
07:57:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:57:28 Set channel filter=0.000000e+000  result=40
07:57:28 Config A/D  Result=40
07:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:57:28 Get A/D filter: -9.255963e+061  result=40
07:57:28 Get A/D value=-858993460  result=40
07:57:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:57:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:57:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:57:28 Aux=
07:57:28 Message to Camera, serial 349360 queued
07:58:05 Received message from Master: op=PointingHead serial=349373
07:58:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:58:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:58:06 Point started: ret=0
07:58:06 point_skyscan result=0
07:58:07 Check angles
07:58:07 SkyScan query
07:58:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:58:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:58:07 Message to Master queued w/err=0: serial=349373 error=0
07:58:12 Received message from Master: op=Filter serial=349374
07:58:12 Color wheel filter change from 0 to 0
07:58:12 FLIGetFilterPos err=0  currentPosition=0
07:58:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:58:12 Filter is already there-color wheel unchanged
07:58:12 Received message from Master: op=Shutter serial=349375
07:58:12 Shutter LASER close
07:58:12 Received message from Camera: op=State serial=349377
07:58:12 GetSingleValue result=40  Value=cccccccc
07:58:12 SkyScan query
07:58:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:58:13 Parameters OK
07:58:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:58:13 Set A/D data flow result=40
07:58:13 Set A/D channel type result=40
07:58:13 Set A/D encoding result=40
07:58:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:58:13 Set channel filter=0.000000e+000  result=40
07:58:13 Config A/D  Result=40
07:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:58:13 Get A/D filter: -9.255963e+061  result=40
07:58:13 Get A/D value=-858993460  result=40
07:58:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:58:13 Parameters OK
07:58:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:58:13 Set A/D data flow result=40
07:58:13 Set A/D channel type result=40
07:58:13 Set A/D encoding result=40
07:58:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:58:13 Set channel filter=0.000000e+000  result=40
07:58:13 Config A/D  Result=40
07:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:58:13 Get A/D filter: -9.255963e+061  result=40
07:58:13 Get A/D value=-858993460  result=40
07:58:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:58:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:58:13 Aux=
07:58:13 Message to Camera, serial 349377 queued
07:58:50 Received message from Master: op=PointingHead serial=349390
07:58:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:58:50 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:58:50 Point started: ret=0
07:58:50 point_skyscan result=0
07:58:51 Check angles
07:58:51 SkyScan query
07:58:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.655<-13577  Statuses=0008 0009
07:58:51 Msec=0  True Az=112.995  Ze=-23.655  Az status=0008  Ze status=0009
07:58:52 Check angles
07:58:52 SkyScan query
07:58:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.61<-14974  Statuses=0008 0009
07:58:52 Msec=750  True Az=112.995  Ze=-44.61  Az status=0008  Ze status=0009
07:58:52 Check angles
07:58:52 SkyScan query
07:58:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.985<-16399  Statuses=0008 0009
07:58:53 Msec=1500  True Az=112.995  Ze=-65.985  Az status=0008  Ze status=0009
07:58:53 Check angles
07:58:53 SkyScan query
07:58:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.39<-17826  Statuses=0008 0009
07:58:54 Msec=2250  True Az=112.995  Ze=-87.39  Az status=0008  Ze status=0009
07:58:54 Check angles
07:58:54 SkyScan query
07:58:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.765<-19251  Statuses=0008 0009
07:58:54 Msec=3000  True Az=112.995  Ze=-108.765  Az status=0008  Ze status=0009
07:58:55 Check angles
07:58:55 SkyScan query
07:58:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.72<-20648  Statuses=0008 0009
07:58:55 Msec=3750  True Az=112.995  Ze=-129.72  Az status=0008  Ze status=0009
07:58:55 Check angles
07:58:55 SkyScan query
07:58:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.11<-22074  Statuses=0008 0009
07:58:56 Msec=4500  True Az=112.995  Ze=-151.11  Az status=0008  Ze status=0009
07:58:56 Check angles
07:58:56 SkyScan query
07:58:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.96<-23464  Statuses=0008 0009
07:58:57 Msec=5250  True Az=112.995  Ze=-171.96  Az status=0008  Ze status=0009
07:58:57 Check angles
07:58:57 SkyScan query
07:58:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:58:57 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:58:57 Message to Master queued w/err=0: serial=349390 error=0
07:59:02 Received message from Master: op=Filter serial=349391
07:59:02 Color wheel filter change from 0 to 0
07:59:02 FLIGetFilterPos err=0  currentPosition=0
07:59:02 FLIGetStepsRemaining err=0  RemainingSteps=0
07:59:02 Filter is already there-color wheel unchanged
07:59:03 Received message from Master: op=Shutter serial=349392
07:59:03 Shutter LASER open
07:59:03 Received message from Camera: op=State serial=349394
07:59:03 GetSingleValue result=40  Value=cccccccc
07:59:03 SkyScan query
07:59:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:59:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:59:03 Parameters OK
07:59:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:59:03 Set A/D data flow result=40
07:59:03 Set A/D channel type result=40
07:59:03 Set A/D encoding result=40
07:59:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:59:03 Set channel filter=0.000000e+000  result=40
07:59:03 Config A/D  Result=40
07:59:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:59:03 Get A/D filter: -9.255963e+061  result=40
07:59:03 Get A/D value=-858993460  result=40
07:59:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:59:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:59:03 Parameters OK
07:59:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:59:03 Set A/D data flow result=40
07:59:03 Set A/D channel type result=40
07:59:03 Set A/D encoding result=40
07:59:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:59:03 Set channel filter=0.000000e+000  result=40
07:59:03 Config A/D  Result=40
07:59:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:59:03 Get A/D filter: -9.255963e+061  result=40
07:59:03 Get A/D value=-858993460  result=40
07:59:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:59:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:59:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:59:03 Aux=
07:59:03 Message to Camera, serial 349394 queued
07:59:12 Received message from Master: op=Shutter serial=349404
07:59:12 Shutter LASER close
07:59:12 Received message from Master: op=PointingHead serial=349408
07:59:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:59:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:59:13 Point started: ret=0
07:59:13 point_skyscan result=0
07:59:14 Check angles
07:59:14 SkyScan query
07:59:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
07:59:14 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
07:59:14 Check angles
07:59:14 SkyScan query
07:59:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
07:59:15 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
07:59:15 Check angles
07:59:15 SkyScan query
07:59:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.565<-18771  Statuses=0008 0009
07:59:16 Msec=1500  True Az=112.995  Ze=-101.565  Az status=0008  Ze status=0009
07:59:16 Check angles
07:59:16 SkyScan query
07:59:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
07:59:16 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
07:59:17 Check angles
07:59:17 SkyScan query
07:59:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.265<-15951  Statuses=0008 0009
07:59:17 Msec=3000  True Az=112.995  Ze=-59.265  Az status=0008  Ze status=0009
07:59:17 Check angles
07:59:17 SkyScan query
07:59:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.265<-14551  Statuses=0008 0009
07:59:18 Msec=3750  True Az=112.995  Ze=-38.265  Az status=0008  Ze status=0009
07:59:18 Check angles
07:59:18 SkyScan query
07:59:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.875<-13125  Statuses=0008 0009
07:59:19 Msec=4500  True Az=112.995  Ze=-16.875  Az status=0008  Ze status=0009
07:59:19 Check angles
07:59:19 SkyScan query
07:59:19 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
07:59:19 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
07:59:20 Check angles
07:59:20 SkyScan query
07:59:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:59:20 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:59:20 Message to Master queued w/err=0: serial=349408 error=0
07:59:25 Received message from Master: op=Filter serial=349409
07:59:25 Color wheel filter change from 0 to 0
07:59:25 FLIGetFilterPos err=0  currentPosition=0
07:59:25 FLIGetStepsRemaining err=0  RemainingSteps=0
07:59:25 Filter is already there-color wheel unchanged
07:59:25 Received message from Master: op=Shutter serial=349410
07:59:25 Shutter LASER close
07:59:25 Received message from Camera: op=State serial=349412
07:59:25 GetSingleValue result=40  Value=cccccccc
07:59:25 SkyScan query
07:59:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:59:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:59:26 Parameters OK
07:59:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:59:26 Set A/D data flow result=40
07:59:26 Set A/D channel type result=40
07:59:26 Set A/D encoding result=40
07:59:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:59:26 Set channel filter=0.000000e+000  result=40
07:59:26 Config A/D  Result=40
07:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:59:26 Get A/D filter: -9.255963e+061  result=40
07:59:26 Get A/D value=-858993460  result=40
07:59:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:59:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:59:26 Parameters OK
07:59:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:59:26 Set A/D data flow result=40
07:59:26 Set A/D channel type result=40
07:59:26 Set A/D encoding result=40
07:59:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:59:26 Set channel filter=0.000000e+000  result=40
07:59:26 Config A/D  Result=40
07:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:59:26 Get A/D filter: -9.255963e+061  result=40
07:59:26 Get A/D value=-858993460  result=40
07:59:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:59:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:59:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:59:26 Aux=
07:59:26 Message to Camera, serial 349412 queued
08:00:03 Received message from Master: op=PointingHead serial=349425
08:00:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:00:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:00:03 Point started: ret=0
08:00:03 point_skyscan result=0
08:00:04 Check angles
08:00:04 SkyScan query
08:00:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:00:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:00:05 Message to Master queued w/err=0: serial=349425 error=0
08:00:10 Received message from Master: op=Filter serial=349426
08:00:10 Color wheel filter change from 0 to 0
08:00:10 FLIGetFilterPos err=0  currentPosition=0
08:00:10 FLIGetStepsRemaining err=0  RemainingSteps=0
08:00:10 Filter is already there-color wheel unchanged
08:00:10 Received message from Master: op=Shutter serial=349427
08:00:10 Shutter LASER close
08:00:10 Received message from Camera: op=State serial=349429
08:00:10 GetSingleValue result=40  Value=cccccccc
08:00:10 SkyScan query
08:00:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:00:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:00:10 Parameters OK
08:00:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:00:10 Set A/D data flow result=40
08:00:10 Set A/D channel type result=40
08:00:10 Set A/D encoding result=40
08:00:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:00:10 Set channel filter=0.000000e+000  result=40
08:00:10 Config A/D  Result=40
08:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:00:10 Get A/D filter: -9.255963e+061  result=40
08:00:10 Get A/D value=-858993460  result=40
08:00:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:00:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:00:10 Parameters OK
08:00:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:00:10 Set A/D data flow result=40
08:00:10 Set A/D channel type result=40
08:00:10 Set A/D encoding result=40
08:00:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:00:10 Set channel filter=0.000000e+000  result=40
08:00:10 Config A/D  Result=40
08:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:00:10 Get A/D filter: -9.255963e+061  result=40
08:00:10 Get A/D value=-858993460  result=40
08:00:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:00:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:00:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:00:10 Aux=
08:00:10 Message to Camera, serial 349429 queued
08:00:47 Received message from Master: op=PointingHead serial=349442
08:00:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:00:47 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:00:48 Point started: ret=0
08:00:48 point_skyscan result=0
08:00:48 Check angles
08:00:48 SkyScan query
08:00:49 SkyScan query done: ret=0  az=136.38<-9092  ze=-6.51<-12434  Statuses=0009 0008
08:00:49 Msec=0  True Az=136.38  Ze=-6.51  Az status=0009  Ze status=0008
08:00:49 Check angles
08:00:49 SkyScan query
08:00:50 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
08:00:50 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
08:00:50 Check angles
08:00:50 SkyScan query
08:00:50 SkyScan query done: ret=0  az=171.72<-11448  ze=-6.495<-12433  Statuses=0009 0008
08:00:50 Msec=1500  True Az=171.72  Ze=-6.495  Az status=0009  Ze status=0008
08:00:51 Check angles
08:00:51 SkyScan query
08:00:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:00:51 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:00:51 Message to Master queued w/err=0: serial=349442 error=0
08:00:56 Received message from Master: op=Filter serial=349443
08:00:56 Color wheel filter change from 0 to 0
08:00:56 FLIGetFilterPos err=0  currentPosition=0
08:00:56 FLIGetStepsRemaining err=0  RemainingSteps=0
08:00:56 Filter is already there-color wheel unchanged
08:00:56 Received message from Master: op=Shutter serial=349444
08:00:56 Shutter LASER close
08:00:56 Received message from Camera: op=State serial=349446
08:00:56 GetSingleValue result=40  Value=cccccccc
08:00:56 SkyScan query
08:00:57 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:00:57 Parameters OK
08:00:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:00:57 Set A/D data flow result=40
08:00:57 Set A/D channel type result=40
08:00:57 Set A/D encoding result=40
08:00:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:00:57 Set channel filter=0.000000e+000  result=40
08:00:57 Config A/D  Result=40
08:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:00:57 Get A/D filter: -9.255963e+061  result=40
08:00:57 Get A/D value=-858993460  result=40
08:00:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:00:57 Parameters OK
08:00:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:00:57 Set A/D data flow result=40
08:00:57 Set A/D channel type result=40
08:00:57 Set A/D encoding result=40
08:00:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:00:57 Set channel filter=0.000000e+000  result=40
08:00:57 Config A/D  Result=40
08:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:00:57 Get A/D filter: -9.255963e+061  result=40
08:00:57 Get A/D value=-858993460  result=40
08:00:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:00:57 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:00:57 Aux=
08:00:57 Message to Camera, serial 349446 queued
08:01:34 Received message from Master: op=PointingHead serial=349459
08:01:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:01:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:01:34 Point started: ret=0
08:01:34 point_skyscan result=0
08:01:35 Check angles
08:01:35 SkyScan query
08:01:35 SkyScan query done: ret=0  az=153.18<-10212  ze=6.51<-11566  Statuses=0009 0008
08:01:35 Msec=0  True Az=153.18  Ze=6.51  Az status=0009  Ze status=0008
08:01:36 Check angles
08:01:36 SkyScan query
08:01:36 SkyScan query done: ret=0  az=135.705<-9047  ze=6.495<-11567  Statuses=0009 0008
08:01:36 Msec=750  True Az=135.705  Ze=6.495  Az status=0009  Ze status=0008
08:01:36 Check angles
08:01:36 SkyScan query
08:01:37 SkyScan query done: ret=0  az=117.855<-7857  ze=6.495<-11567  Statuses=0009 0008
08:01:37 Msec=1500  True Az=117.855  Ze=6.495  Az status=0009  Ze status=0008
08:01:37 Check angles
08:01:37 SkyScan query
08:01:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:01:38 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:01:38 Message to Master queued w/err=0: serial=349459 error=0
08:01:43 Received message from Master: op=Filter serial=349460
08:01:43 Color wheel filter change from 0 to 0
08:01:43 FLIGetFilterPos err=0  currentPosition=0
08:01:43 FLIGetStepsRemaining err=0  RemainingSteps=0
08:01:43 Filter is already there-color wheel unchanged
08:01:43 Received message from Master: op=Shutter serial=349461
08:01:43 Shutter LASER close
08:01:43 Received message from Camera: op=State serial=349463
08:01:43 GetSingleValue result=40  Value=cccccccc
08:01:43 SkyScan query
08:01:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:01:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:01:43 Parameters OK
08:01:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:01:43 Set A/D data flow result=40
08:01:43 Set A/D channel type result=40
08:01:43 Set A/D encoding result=40
08:01:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:01:43 Set channel filter=0.000000e+000  result=40
08:01:43 Config A/D  Result=40
08:01:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:01:43 Get A/D filter: -9.255963e+061  result=40
08:01:43 Get A/D value=-858993460  result=40
08:01:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:01:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:01:43 Parameters OK
08:01:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:01:43 Set A/D data flow result=40
08:01:43 Set A/D channel type result=40
08:01:43 Set A/D encoding result=40
08:01:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:01:43 Set channel filter=0.000000e+000  result=40
08:01:43 Config A/D  Result=40
08:01:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:01:43 Get A/D filter: -9.255963e+061  result=40
08:01:43 Get A/D value=-858993460  result=40
08:01:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:01:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:01:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:01:43 Aux=
08:01:43 Message to Camera, serial 349463 queued
08:02:20 Received message from Master: op=PointingHead serial=349476
08:02:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:02:20 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:02:21 Point started: ret=0
08:02:21 point_skyscan result=0
08:02:21 Check angles
08:02:21 SkyScan query
08:02:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
08:02:22 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
08:02:22 Check angles
08:02:22 SkyScan query
08:02:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.745<-14983  Statuses=0008 0009
08:02:23 Msec=750  True Az=112.995  Ze=-44.745  Az status=0008  Ze status=0009
08:02:23 Check angles
08:02:23 SkyScan query
08:02:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.7<-16380  Statuses=0008 0009
08:02:24 Msec=1500  True Az=112.995  Ze=-65.7  Az status=0008  Ze status=0009
08:02:24 Check angles
08:02:24 SkyScan query
08:02:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.655<-17777  Statuses=0008 0009
08:02:24 Msec=2250  True Az=112.995  Ze=-86.655  Az status=0008  Ze status=0009
08:02:24 Check angles
08:02:24 SkyScan query
08:02:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.595<-19173  Statuses=0008 0009
08:02:25 Msec=3000  True Az=112.995  Ze=-107.595  Az status=0008  Ze status=0009
08:02:25 Check angles
08:02:25 SkyScan query
08:02:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.985<-20599  Statuses=0008 0009
08:02:26 Msec=3750  True Az=112.995  Ze=-128.985  Az status=0008  Ze status=0009
08:02:26 Check angles
08:02:26 SkyScan query
08:02:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.94<-21996  Statuses=0008 0009
08:02:27 Msec=4500  True Az=112.995  Ze=-149.94  Az status=0008  Ze status=0009
08:02:27 Check angles
08:02:27 SkyScan query
08:02:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.805<-23387  Statuses=0008 0009
08:02:27 Msec=5250  True Az=112.995  Ze=-170.805  Az status=0008  Ze status=0009
08:02:28 Check angles
08:02:28 SkyScan query
08:02:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:02:28 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:02:28 Message to Master queued w/err=0: serial=349476 error=0
08:02:33 Received message from Master: op=Filter serial=349477
08:02:33 Color wheel filter change from 0 to 0
08:02:33 FLIGetFilterPos err=0  currentPosition=0
08:02:33 FLIGetStepsRemaining err=0  RemainingSteps=0
08:02:33 Filter is already there-color wheel unchanged
08:02:33 Received message from Master: op=Shutter serial=349478
08:02:33 Shutter LASER open
08:02:33 Received message from Camera: op=State serial=349480
08:02:33 GetSingleValue result=40  Value=cccccccc
08:02:33 SkyScan query
08:02:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:02:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:34 Parameters OK
08:02:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:34 Set A/D data flow result=40
08:02:34 Set A/D channel type result=40
08:02:34 Set A/D encoding result=40
08:02:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:34 Set channel filter=0.000000e+000  result=40
08:02:34 Config A/D  Result=40
08:02:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:34 Get A/D filter: -9.255963e+061  result=40
08:02:34 Get A/D value=-858993460  result=40
08:02:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:34 Parameters OK
08:02:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:34 Set A/D data flow result=40
08:02:34 Set A/D channel type result=40
08:02:34 Set A/D encoding result=40
08:02:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:34 Set channel filter=0.000000e+000  result=40
08:02:34 Config A/D  Result=40
08:02:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:34 Get A/D filter: -9.255963e+061  result=40
08:02:34 Get A/D value=-858993460  result=40
08:02:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:02:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:02:34 Aux=
08:02:34 Message to Camera, serial 349480 queued
08:02:42 Received message from Master: op=Shutter serial=349489
08:02:42 Shutter LASER close
08:02:42 Received message from Master: op=PointingHead serial=349493
08:02:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:02:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:02:42 Point started: ret=0
08:02:42 point_skyscan result=0
08:02:43 Check angles
08:02:43 SkyScan query
08:02:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
08:02:44 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
08:02:44 Check angles
08:02:44 SkyScan query
08:02:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.07<-20138  Statuses=0008 0009
08:02:44 Msec=750  True Az=112.995  Ze=-122.07  Az status=0008  Ze status=0009
08:02:45 Check angles
08:02:45 SkyScan query
08:02:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
08:02:45 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
08:02:45 Check angles
08:02:45 SkyScan query
08:02:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.19<-17346  Statuses=0008 0009
08:02:46 Msec=2250  True Az=112.995  Ze=-80.19  Az status=0008  Ze status=0009
08:02:46 Check angles
08:02:46 SkyScan query
08:02:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.235<-15949  Statuses=0008 0009
08:02:47 Msec=3000  True Az=112.995  Ze=-59.235  Az status=0008  Ze status=0009
08:02:47 Check angles
08:02:47 SkyScan query
08:02:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.235<-14549  Statuses=0008 0009
08:02:47 Msec=3750  True Az=112.995  Ze=-38.235  Az status=0008  Ze status=0009
08:02:48 Check angles
08:02:48 SkyScan query
08:02:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.31<-13154  Statuses=0008 0009
08:02:48 Msec=4500  True Az=112.995  Ze=-17.31  Az status=0008  Ze status=0009
08:02:48 Check angles
08:02:48 SkyScan query
08:02:49 SkyScan query done: ret=0  az=112.995<-7533  ze=3.675<-11755  Statuses=0008 0009
08:02:49 Msec=5250  True Az=112.995  Ze=3.675  Az status=0008  Ze status=0009
08:02:49 Check angles
08:02:49 SkyScan query
08:02:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:02:50 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:02:50 Message to Master queued w/err=0: serial=349493 error=0
08:02:55 Received message from Master: op=Filter serial=349494
08:02:55 Color wheel filter change from 0 to 0
08:02:55 FLIGetFilterPos err=0  currentPosition=0
08:02:55 FLIGetStepsRemaining err=0  RemainingSteps=0
08:02:55 Filter is already there-color wheel unchanged
08:02:55 Received message from Master: op=Shutter serial=349495
08:02:55 Shutter LASER close
08:02:55 Received message from Camera: op=State serial=349497
08:02:55 GetSingleValue result=40  Value=cccccccc
08:02:55 SkyScan query
08:02:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:02:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:56 Parameters OK
08:02:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:56 Set A/D data flow result=40
08:02:56 Set A/D channel type result=40
08:02:56 Set A/D encoding result=40
08:02:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:56 Set channel filter=0.000000e+000  result=40
08:02:56 Config A/D  Result=40
08:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:56 Get A/D filter: -9.255963e+061  result=40
08:02:56 Get A/D value=-858993460  result=40
08:02:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:56 Parameters OK
08:02:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:56 Set A/D data flow result=40
08:02:56 Set A/D channel type result=40
08:02:56 Set A/D encoding result=40
08:02:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:56 Set channel filter=0.000000e+000  result=40
08:02:56 Config A/D  Result=40
08:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:56 Get A/D filter: -9.255963e+061  result=40
08:02:56 Get A/D value=-858993460  result=40
08:02:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:02:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:02:56 Aux=
08:02:56 Message to Camera, serial 349497 queued
08:03:32 Received message from Master: op=PointingHead serial=349510
08:03:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:03:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:03:33 Point started: ret=0
08:03:33 point_skyscan result=0
08:03:33 Check angles
08:03:33 SkyScan query
08:03:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:03:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:03:34 Message to Master queued w/err=0: serial=349510 error=0
08:03:35 Received message from Master: op=Identify serial=349511
08:03:39 Received message from Master: op=Filter serial=349514
08:03:39 Color wheel filter change from 0 to 0
08:03:39 FLIGetFilterPos err=0  currentPosition=0
08:03:39 FLIGetStepsRemaining err=0  RemainingSteps=0
08:03:39 Filter is already there-color wheel unchanged
08:03:39 Received message from Master: op=Shutter serial=349515
08:03:39 Shutter LASER close
08:03:39 Received message from Camera: op=State serial=349517
08:03:39 GetSingleValue result=40  Value=cccccccc
08:03:39 SkyScan query
08:03:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:03:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:03:40 Parameters OK
08:03:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:03:40 Set A/D data flow result=40
08:03:40 Set A/D channel type result=40
08:03:40 Set A/D encoding result=40
08:03:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:03:40 Set channel filter=0.000000e+000  result=40
08:03:40 Config A/D  Result=40
08:03:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:03:40 Get A/D filter: -9.255963e+061  result=40
08:03:40 Get A/D value=-858993460  result=40
08:03:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:03:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:03:40 Parameters OK
08:03:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:03:40 Set A/D data flow result=40
08:03:40 Set A/D channel type result=40
08:03:40 Set A/D encoding result=40
08:03:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:03:40 Set channel filter=0.000000e+000  result=40
08:03:40 Config A/D  Result=40
08:03:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:03:40 Get A/D filter: -9.255963e+061  result=40
08:03:40 Get A/D value=-858993460  result=40
08:03:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:03:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:03:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:03:40 Aux=
08:03:40 Message to Camera, serial 349517 queued
[UTC 2019-3-19  08:03:48]
08:04:16 Received message from Master: op=PointingHead serial=349529
08:04:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:04:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:04:16 Point started: ret=0
08:04:16 point_skyscan result=0
08:04:17 Check angles
08:04:17 SkyScan query
08:04:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:04:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:04:17 Message to Master queued w/err=0: serial=349529 error=0
08:04:22 Received message from Master: op=Filter serial=349530
08:04:22 Color wheel filter change from 0 to 0
08:04:22 FLIGetFilterPos err=0  currentPosition=0
08:04:22 FLIGetStepsRemaining err=0  RemainingSteps=0
08:04:22 Filter is already there-color wheel unchanged
08:04:23 Received message from Master: op=Shutter serial=349531
08:04:23 Shutter LASER close
08:04:23 Received message from Camera: op=State serial=349533
08:04:23 GetSingleValue result=40  Value=cccccccc
08:04:23 SkyScan query
08:04:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:04:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:04:23 Parameters OK
08:04:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:04:23 Set A/D data flow result=40
08:04:23 Set A/D channel type result=40
08:04:23 Set A/D encoding result=40
08:04:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:04:23 Set channel filter=0.000000e+000  result=40
08:04:23 Config A/D  Result=40
08:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:04:23 Get A/D filter: -9.255963e+061  result=40
08:04:23 Get A/D value=-858993460  result=40
08:04:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:04:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:04:23 Parameters OK
08:04:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:04:23 Set A/D data flow result=40
08:04:23 Set A/D channel type result=40
08:04:23 Set A/D encoding result=40
08:04:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:04:23 Set channel filter=0.000000e+000  result=40
08:04:23 Config A/D  Result=40
08:04:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:04:23 Get A/D filter: -9.255963e+061  result=40
08:04:23 Get A/D value=-858993460  result=40
08:04:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:04:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:04:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:04:23 Aux=
08:04:23 Message to Camera, serial 349533 queued
08:05:00 Received message from Master: op=PointingHead serial=349546
08:05:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:05:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:05:00 Point started: ret=0
08:05:00 point_skyscan result=0
08:05:01 Check angles
08:05:01 SkyScan query
08:05:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:05:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:05:02 Message to Master queued w/err=0: serial=349546 error=0
08:05:07 Received message from Master: op=Filter serial=349547
08:05:07 Color wheel filter change from 0 to 0
08:05:07 FLIGetFilterPos err=0  currentPosition=0
08:05:07 FLIGetStepsRemaining err=0  RemainingSteps=0
08:05:07 Filter is already there-color wheel unchanged
08:05:07 Received message from Master: op=Shutter serial=349548
08:05:07 Shutter LASER close
08:05:07 Received message from Camera: op=State serial=349550
08:05:07 GetSingleValue result=40  Value=cccccccc
08:05:07 SkyScan query
08:05:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:05:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:07 Parameters OK
08:05:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:07 Set A/D data flow result=40
08:05:07 Set A/D channel type result=40
08:05:07 Set A/D encoding result=40
08:05:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:07 Set channel filter=0.000000e+000  result=40
08:05:07 Config A/D  Result=40
08:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:07 Get A/D filter: -9.255963e+061  result=40
08:05:07 Get A/D value=-858993460  result=40
08:05:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:07 Parameters OK
08:05:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:07 Set A/D data flow result=40
08:05:07 Set A/D channel type result=40
08:05:07 Set A/D encoding result=40
08:05:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:07 Set channel filter=0.000000e+000  result=40
08:05:07 Config A/D  Result=40
08:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:07 Get A/D filter: -9.255963e+061  result=40
08:05:07 Get A/D value=-858993460  result=40
08:05:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:05:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:05:07 Aux=
08:05:07 Message to Camera, serial 349550 queued
08:05:44 Received message from Master: op=PointingHead serial=349563
08:05:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:05:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:05:45 Point started: ret=0
08:05:45 point_skyscan result=0
08:05:45 Check angles
08:05:45 SkyScan query
08:05:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
08:05:46 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
08:05:46 Check angles
08:05:46 SkyScan query
08:05:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
08:05:47 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
08:05:47 Check angles
08:05:47 SkyScan query
08:05:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
08:05:47 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
08:05:48 Check angles
08:05:48 SkyScan query
08:05:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
08:05:48 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
08:05:48 Check angles
08:05:48 SkyScan query
08:05:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.7<-19180  Statuses=0008 0009
08:05:49 Msec=3000  True Az=112.995  Ze=-107.7  Az status=0008  Ze status=0009
08:05:49 Check angles
08:05:49 SkyScan query
08:05:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.655<-20577  Statuses=0008 0009
08:05:50 Msec=3750  True Az=112.995  Ze=-128.655  Az status=0008  Ze status=0009
08:05:50 Check angles
08:05:50 SkyScan query
08:05:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.06<-22004  Statuses=0008 0009
08:05:50 Msec=4500  True Az=112.995  Ze=-150.06  Az status=0008  Ze status=0009
08:05:51 Check angles
08:05:51 SkyScan query
08:05:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.895<-23393  Statuses=0008 0009
08:05:51 Msec=5250  True Az=112.995  Ze=-170.895  Az status=0008  Ze status=0009
08:05:51 Check angles
08:05:51 SkyScan query
08:05:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:05:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:05:52 Message to Master queued w/err=0: serial=349563 error=0
08:05:57 Received message from Master: op=Filter serial=349564
08:05:57 Color wheel filter change from 0 to 0
08:05:57 FLIGetFilterPos err=0  currentPosition=0
08:05:57 FLIGetStepsRemaining err=0  RemainingSteps=0
08:05:57 Filter is already there-color wheel unchanged
08:05:57 Received message from Master: op=Shutter serial=349565
08:05:57 Shutter LASER open
08:05:57 Received message from Camera: op=State serial=349567
08:05:57 GetSingleValue result=40  Value=cccccccc
08:05:57 SkyScan query
08:05:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:58 Parameters OK
08:05:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:58 Set A/D data flow result=40
08:05:58 Set A/D channel type result=40
08:05:58 Set A/D encoding result=40
08:05:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:58 Set channel filter=0.000000e+000  result=40
08:05:58 Config A/D  Result=40
08:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:58 Get A/D filter: -9.255963e+061  result=40
08:05:58 Get A/D value=-858993460  result=40
08:05:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:58 Parameters OK
08:05:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:58 Set A/D data flow result=40
08:05:58 Set A/D channel type result=40
08:05:58 Set A/D encoding result=40
08:05:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:58 Set channel filter=0.000000e+000  result=40
08:05:58 Config A/D  Result=40
08:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:58 Get A/D filter: -9.255963e+061  result=40
08:05:58 Get A/D value=-858993460  result=40
08:05:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:05:58 Aux=
08:05:58 Message to Camera, serial 349567 queued
08:06:06 Received message from Master: op=Shutter serial=349577
08:06:06 Shutter LASER close
08:06:07 Received message from Master: op=PointingHead serial=349581
08:06:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:06:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:06:07 Point started: ret=0
08:06:07 point_skyscan result=0
08:06:08 Check angles
08:06:08 SkyScan query
08:06:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
08:06:09 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
08:06:09 Check angles
08:06:09 SkyScan query
08:06:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
08:06:09 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
08:06:10 Check angles
08:06:10 SkyScan query
08:06:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
08:06:10 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
08:06:10 Check angles
08:06:10 SkyScan query
08:06:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.875<-17325  Statuses=0008 0009
08:06:11 Msec=2250  True Az=112.995  Ze=-79.875  Az status=0008  Ze status=0009
08:06:11 Check angles
08:06:11 SkyScan query
08:06:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.95<-15930  Statuses=0008 0009
08:06:12 Msec=3000  True Az=112.995  Ze=-58.95  Az status=0008  Ze status=0009
08:06:12 Check angles
08:06:12 SkyScan query
08:06:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.515<-14501  Statuses=0008 0009
08:06:12 Msec=3750  True Az=112.995  Ze=-37.515  Az status=0008  Ze status=0009
08:06:13 Check angles
08:06:13 SkyScan query
08:06:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.56<-13104  Statuses=0008 0009
08:06:13 Msec=4500  True Az=112.995  Ze=-16.56  Az status=0008  Ze status=0009
08:06:13 Check angles
08:06:13 SkyScan query
08:06:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.32<-11712  Statuses=0008 0009
08:06:14 Msec=5250  True Az=112.995  Ze=4.32  Az status=0008  Ze status=0009
08:06:14 Check angles
08:06:14 SkyScan query
08:06:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:06:15 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:06:15 Message to Master queued w/err=0: serial=349581 error=0
08:06:20 Received message from Master: op=Filter serial=349582
08:06:20 Color wheel filter change from 0 to 0
08:06:20 FLIGetFilterPos err=0  currentPosition=0
08:06:20 FLIGetStepsRemaining err=0  RemainingSteps=0
08:06:20 Filter is already there-color wheel unchanged
08:06:20 Received message from Master: op=Shutter serial=349583
08:06:20 Shutter LASER close
08:06:20 Received message from Camera: op=State serial=349585
08:06:20 GetSingleValue result=40  Value=cccccccc
08:06:20 SkyScan query
08:06:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:06:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:06:21 Parameters OK
08:06:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:06:21 Set A/D data flow result=40
08:06:21 Set A/D channel type result=40
08:06:21 Set A/D encoding result=40
08:06:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:06:21 Set channel filter=0.000000e+000  result=40
08:06:21 Config A/D  Result=40
08:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:06:21 Get A/D filter: -9.255963e+061  result=40
08:06:21 Get A/D value=-858993460  result=40
08:06:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:06:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:06:21 Parameters OK
08:06:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:06:21 Set A/D data flow result=40
08:06:21 Set A/D channel type result=40
08:06:21 Set A/D encoding result=40
08:06:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:06:21 Set channel filter=0.000000e+000  result=40
08:06:21 Config A/D  Result=40
08:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:06:21 Get A/D filter: -9.255963e+061  result=40
08:06:21 Get A/D value=-858993460  result=40
08:06:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:06:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:06:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:06:21 Aux=
08:06:21 Message to Camera, serial 349585 queued
08:06:57 Received message from Master: op=PointingHead serial=349598
08:06:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:06:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:06:58 Point started: ret=0
08:06:58 point_skyscan result=0
08:06:58 Check angles
08:06:58 SkyScan query
08:06:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:06:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:06:59 Message to Master queued w/err=0: serial=349598 error=0
08:07:04 Received message from Master: op=Filter serial=349599
08:07:04 Color wheel filter change from 0 to 0
08:07:04 FLIGetFilterPos err=0  currentPosition=0
08:07:04 FLIGetStepsRemaining err=0  RemainingSteps=0
08:07:04 Filter is already there-color wheel unchanged
08:07:04 Received message from Master: op=Shutter serial=349600
08:07:04 Shutter LASER close
08:07:04 Received message from Camera: op=State serial=349602
08:07:04 GetSingleValue result=40  Value=cccccccc
08:07:04 SkyScan query
08:07:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:07:05 Parameters OK
08:07:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:07:05 Set A/D data flow result=40
08:07:05 Set A/D channel type result=40
08:07:05 Set A/D encoding result=40
08:07:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:07:05 Set channel filter=0.000000e+000  result=40
08:07:05 Config A/D  Result=40
08:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:07:05 Get A/D filter: -9.255963e+061  result=40
08:07:05 Get A/D value=-858993460  result=40
08:07:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:07:05 Parameters OK
08:07:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:07:05 Set A/D data flow result=40
08:07:05 Set A/D channel type result=40
08:07:05 Set A/D encoding result=40
08:07:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:07:05 Set channel filter=0.000000e+000  result=40
08:07:05 Config A/D  Result=40
08:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:07:05 Get A/D filter: -9.255963e+061  result=40
08:07:05 Get A/D value=-858993460  result=40
08:07:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:07:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:07:05 Aux=
08:07:05 Message to Camera, serial 349602 queued
08:07:42 Received message from Master: op=PointingHead serial=349615
08:07:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:07:42 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:07:42 Point started: ret=0
08:07:42 point_skyscan result=0
08:07:43 Check angles
08:07:43 SkyScan query
08:07:43 SkyScan query done: ret=0  az=135.75<-9050  ze=-6.495<-12433  Statuses=0009 0008
08:07:43 Msec=0  True Az=135.75  Ze=-6.495  Az status=0009  Ze status=0008
08:07:44 Check angles
08:07:44 SkyScan query
08:07:44 SkyScan query done: ret=0  az=153.24<-10216  ze=-6.48<-12432  Statuses=0009 0008
08:07:44 Msec=750  True Az=153.24  Ze=-6.48  Az status=0009  Ze status=0008
08:07:44 Check angles
08:07:44 SkyScan query
08:07:45 SkyScan query done: ret=0  az=170.73<-11382  ze=-6.48<-12432  Statuses=0009 0008
08:07:45 Msec=1500  True Az=170.73  Ze=-6.48  Az status=0009  Ze status=0008
08:07:45 Check angles
08:07:45 SkyScan query
08:07:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
08:07:46 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
08:07:46 Message to Master queued w/err=0: serial=349615 error=0
08:07:51 Received message from Master: op=Filter serial=349616
08:07:51 Color wheel filter change from 0 to 0
08:07:51 FLIGetFilterPos err=0  currentPosition=0
08:07:51 FLIGetStepsRemaining err=0  RemainingSteps=0
08:07:51 Filter is already there-color wheel unchanged
08:07:51 Received message from Master: op=Shutter serial=349617
08:07:51 Shutter LASER close
08:07:51 Received message from Camera: op=State serial=349619
08:07:51 GetSingleValue result=40  Value=cccccccc
08:07:51 SkyScan query
08:07:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
08:07:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:07:51 Parameters OK
08:07:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:07:51 Set A/D data flow result=40
08:07:51 Set A/D channel type result=40
08:07:51 Set A/D encoding result=40
08:07:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:07:51 Set channel filter=0.000000e+000  result=40
08:07:51 Config A/D  Result=40
08:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:07:51 Get A/D filter: -9.255963e+061  result=40
08:07:51 Get A/D value=-858993460  result=40
08:07:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:07:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:07:51 Parameters OK
08:07:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:07:51 Set A/D data flow result=40
08:07:51 Set A/D channel type result=40
08:07:51 Set A/D encoding result=40
08:07:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:07:51 Set channel filter=0.000000e+000  result=40
08:07:51 Config A/D  Result=40
08:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:07:51 Get A/D filter: -9.255963e+061  result=40
08:07:51 Get A/D value=-858993460  result=40
08:07:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:07:51 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:07:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:07:51 Aux=
08:07:51 Message to Camera, serial 349619 queued
08:08:28 Received message from Master: op=PointingHead serial=349632
08:08:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:08:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:08:29 Point started: ret=0
08:08:29 point_skyscan result=0
08:08:29 Check angles
08:08:29 SkyScan query
08:08:30 SkyScan query done: ret=0  az=153.255<-10217  ze=6.51<-11566  Statuses=0009 0008
08:08:30 Msec=0  True Az=153.255  Ze=6.51  Az status=0009  Ze status=0008
08:08:30 Check angles
08:08:30 SkyScan query
08:08:31 SkyScan query done: ret=0  az=135.78<-9052  ze=6.495<-11567  Statuses=0009 0008
08:08:31 Msec=750  True Az=135.78  Ze=6.495  Az status=0009  Ze status=0008
08:08:31 Check angles
08:08:31 SkyScan query
08:08:31 SkyScan query done: ret=0  az=118.335<-7889  ze=6.495<-11567  Statuses=0009 0008
08:08:31 Msec=1500  True Az=118.335  Ze=6.495  Az status=0009  Ze status=0008
08:08:32 Check angles
08:08:32 SkyScan query
08:08:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:08:32 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:08:32 Message to Master queued w/err=0: serial=349632 error=0
08:08:37 Received message from Master: op=Filter serial=349633
08:08:37 Color wheel filter change from 0 to 0
08:08:37 FLIGetFilterPos err=0  currentPosition=0
08:08:37 FLIGetStepsRemaining err=0  RemainingSteps=0
08:08:37 Filter is already there-color wheel unchanged
08:08:37 Received message from Master: op=Shutter serial=349634
08:08:37 Shutter LASER close
08:08:37 Received message from Camera: op=State serial=349636
08:08:37 GetSingleValue result=40  Value=cccccccc
08:08:37 SkyScan query
08:08:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:08:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:08:38 Parameters OK
08:08:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:08:38 Set A/D data flow result=40
08:08:38 Set A/D channel type result=40
08:08:38 Set A/D encoding result=40
08:08:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:08:38 Set channel filter=0.000000e+000  result=40
08:08:38 Config A/D  Result=40
08:08:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:08:38 Get A/D filter: -9.255963e+061  result=40
08:08:38 Get A/D value=-858993460  result=40
08:08:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:08:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:08:38 Parameters OK
08:08:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:08:38 Set A/D data flow result=40
08:08:38 Set A/D channel type result=40
08:08:38 Set A/D encoding result=40
08:08:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:08:38 Set channel filter=0.000000e+000  result=40
08:08:38 Config A/D  Result=40
08:08:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:08:38 Get A/D filter: -9.255963e+061  result=40
08:08:38 Get A/D value=-858993460  result=40
08:08:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:08:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:08:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:08:38 Aux=
08:08:38 Message to Camera, serial 349636 queued
08:09:15 Received message from Master: op=PointingHead serial=349649
08:09:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:09:15 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:09:15 Point started: ret=0
08:09:15 point_skyscan result=0
08:09:16 Check angles
08:09:16 SkyScan query
08:09:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.355<-13557  Statuses=0008 0009
08:09:17 Msec=0  True Az=112.995  Ze=-23.355  Az status=0008  Ze status=0009
08:09:17 Check angles
08:09:17 SkyScan query
08:09:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
08:09:17 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
08:09:17 Check angles
08:09:17 SkyScan query
08:09:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.28<-16352  Statuses=0008 0009
08:09:18 Msec=1500  True Az=112.995  Ze=-65.28  Az status=0008  Ze status=0009
08:09:18 Check angles
08:09:18 SkyScan query
08:09:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.655<-17777  Statuses=0008 0009
08:09:19 Msec=2250  True Az=112.995  Ze=-86.655  Az status=0008  Ze status=0009
08:09:19 Check angles
08:09:19 SkyScan query
08:09:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.03<-19202  Statuses=0008 0009
08:09:20 Msec=3000  True Az=112.995  Ze=-108.03  Az status=0008  Ze status=0009
08:09:20 Check angles
08:09:20 SkyScan query
08:09:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.97<-20598  Statuses=0008 0009
08:09:20 Msec=3750  True Az=112.995  Ze=-128.97  Az status=0008  Ze status=0009
08:09:20 Check angles
08:09:20 SkyScan query
08:09:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.94<-21996  Statuses=0008 0009
08:09:21 Msec=4500  True Az=112.995  Ze=-149.94  Az status=0008  Ze status=0009
08:09:21 Check angles
08:09:21 SkyScan query
08:09:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.82<-23388  Statuses=0008 0009
08:09:22 Msec=5250  True Az=112.995  Ze=-170.82  Az status=0008  Ze status=0009
08:09:22 Check angles
08:09:22 SkyScan query
08:09:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:09:23 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:09:23 Message to Master queued w/err=0: serial=349649 error=0
08:09:28 Received message from Master: op=Filter serial=349650
08:09:28 Color wheel filter change from 0 to 0
08:09:28 FLIGetFilterPos err=0  currentPosition=0
08:09:28 FLIGetStepsRemaining err=0  RemainingSteps=0
08:09:28 Filter is already there-color wheel unchanged
08:09:28 Received message from Master: op=Shutter serial=349651
08:09:28 Shutter LASER open
08:09:28 Received message from Camera: op=State serial=349653
08:09:28 GetSingleValue result=40  Value=cccccccc
08:09:28 SkyScan query
08:09:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:09:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:09:28 Parameters OK
08:09:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:09:28 Set A/D data flow result=40
08:09:28 Set A/D channel type result=40
08:09:28 Set A/D encoding result=40
08:09:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:09:28 Set channel filter=0.000000e+000  result=40
08:09:28 Config A/D  Result=40
08:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:09:28 Get A/D filter: -9.255963e+061  result=40
08:09:28 Get A/D value=-858993460  result=40
08:09:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:09:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:09:28 Parameters OK
08:09:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:09:28 Set A/D data flow result=40
08:09:28 Set A/D channel type result=40
08:09:28 Set A/D encoding result=40
08:09:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:09:28 Set channel filter=0.000000e+000  result=40
08:09:28 Config A/D  Result=40
08:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:09:28 Get A/D filter: -9.255963e+061  result=40
08:09:28 Get A/D value=-858993460  result=40
08:09:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:09:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:09:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:09:28 Aux=
08:09:28 Message to Camera, serial 349653 queued
08:09:37 Received message from Master: op=Shutter serial=349663
08:09:37 Shutter LASER close
08:09:37 Received message from Master: op=PointingHead serial=349667
08:09:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:09:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:09:38 Point started: ret=0
08:09:38 point_skyscan result=0
08:09:38 Check angles
08:09:38 SkyScan query
08:09:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
08:09:39 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
08:09:39 Check angles
08:09:39 SkyScan query
08:09:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.68<-20112  Statuses=0008 0009
08:09:40 Msec=750  True Az=112.995  Ze=-121.68  Az status=0008  Ze status=0009
08:09:40 Check angles
08:09:40 SkyScan query
08:09:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
08:09:41 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
08:09:41 Check angles
08:09:41 SkyScan query
08:09:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.725<-17315  Statuses=0008 0009
08:09:41 Msec=2250  True Az=112.995  Ze=-79.725  Az status=0008  Ze status=0009
08:09:41 Check angles
08:09:41 SkyScan query
08:09:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.83<-15922  Statuses=0008 0009
08:09:42 Msec=3000  True Az=112.995  Ze=-58.83  Az status=0008  Ze status=0009
08:09:42 Check angles
08:09:42 SkyScan query
08:09:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.845<-14523  Statuses=0008 0009
08:09:43 Msec=3750  True Az=112.995  Ze=-37.845  Az status=0008  Ze status=0009
08:09:43 Check angles
08:09:43 SkyScan query
08:09:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.89<-13126  Statuses=0008 0009
08:09:44 Msec=4500  True Az=112.995  Ze=-16.89  Az status=0008  Ze status=0009
08:09:44 Check angles
08:09:44 SkyScan query
08:09:44 SkyScan query done: ret=0  az=112.995<-7533  ze=4.05<-11730  Statuses=0008 0009
08:09:44 Msec=5250  True Az=112.995  Ze=4.05  Az status=0008  Ze status=0009
08:09:44 Check angles
08:09:44 SkyScan query
08:09:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:09:45 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:09:45 Message to Master queued w/err=0: serial=349667 error=0
08:09:50 Received message from Master: op=Filter serial=349668
08:09:50 Color wheel filter change from 0 to 0
08:09:50 FLIGetFilterPos err=0  currentPosition=0
08:09:50 FLIGetStepsRemaining err=0  RemainingSteps=0
08:09:50 Filter is already there-color wheel unchanged
08:09:50 Received message from Master: op=Shutter serial=349669
08:09:50 Shutter LASER close
08:09:50 Received message from Camera: op=State serial=349671
08:09:50 GetSingleValue result=40  Value=cccccccc
08:09:50 SkyScan query
08:09:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:09:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:09:51 Parameters OK
08:09:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:09:51 Set A/D data flow result=40
08:09:51 Set A/D channel type result=40
08:09:51 Set A/D encoding result=40
08:09:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:09:51 Set channel filter=0.000000e+000  result=40
08:09:51 Config A/D  Result=40
08:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:09:51 Get A/D filter: -9.255963e+061  result=40
08:09:51 Get A/D value=-858993460  result=40
08:09:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:09:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:09:51 Parameters OK
08:09:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:09:51 Set A/D data flow result=40
08:09:51 Set A/D channel type result=40
08:09:51 Set A/D encoding result=40
08:09:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:09:51 Set channel filter=0.000000e+000  result=40
08:09:51 Config A/D  Result=40
08:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:09:51 Get A/D filter: -9.255963e+061  result=40
08:09:51 Get A/D value=-858993460  result=40
08:09:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:09:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:09:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:09:51 Aux=
08:09:51 Message to Camera, serial 349671 queued
08:10:28 Received message from Master: op=PointingHead serial=349684
08:10:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:10:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:10:28 Point started: ret=0
08:10:28 point_skyscan result=0
08:10:29 Check angles
08:10:29 SkyScan query
08:10:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:10:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:10:29 Message to Master queued w/err=0: serial=349684 error=0
08:10:34 Received message from Master: op=Filter serial=349685
08:10:34 Color wheel filter change from 0 to 0
08:10:34 FLIGetFilterPos err=0  currentPosition=0
08:10:34 FLIGetStepsRemaining err=0  RemainingSteps=0
08:10:34 Filter is already there-color wheel unchanged
08:10:35 Received message from Master: op=Shutter serial=349686
08:10:35 Shutter LASER close
08:10:35 Received message from Camera: op=State serial=349688
08:10:35 GetSingleValue result=40  Value=cccccccc
08:10:35 SkyScan query
08:10:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:10:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:10:35 Parameters OK
08:10:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:10:35 Set A/D data flow result=40
08:10:35 Set A/D channel type result=40
08:10:35 Set A/D encoding result=40
08:10:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:10:35 Set channel filter=0.000000e+000  result=40
08:10:35 Config A/D  Result=40
08:10:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:10:35 Get A/D filter: -9.255963e+061  result=40
08:10:35 Get A/D value=-858993460  result=40
08:10:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:10:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:10:35 Parameters OK
08:10:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:10:35 Set A/D data flow result=40
08:10:35 Set A/D channel type result=40
08:10:35 Set A/D encoding result=40
08:10:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:10:35 Set channel filter=0.000000e+000  result=40
08:10:35 Config A/D  Result=40
08:10:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:10:35 Get A/D filter: -9.255963e+061  result=40
08:10:35 Get A/D value=-858993460  result=40
08:10:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:10:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:10:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:10:35 Aux=
08:10:35 Message to Camera, serial 349688 queued
08:11:12 Received message from Master: op=PointingHead serial=349701
08:11:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:11:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:11:12 Point started: ret=0
08:11:12 point_skyscan result=0
08:11:13 Check angles
08:11:13 SkyScan query
08:11:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:11:14 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:11:14 Message to Master queued w/err=0: serial=349701 error=0
08:11:19 Received message from Master: op=Filter serial=349702
08:11:19 Color wheel filter change from 0 to 0
08:11:19 FLIGetFilterPos err=0  currentPosition=0
08:11:19 FLIGetStepsRemaining err=0  RemainingSteps=0
08:11:19 Filter is already there-color wheel unchanged
08:11:19 Received message from Master: op=Shutter serial=349703
08:11:19 Shutter LASER close
08:11:19 Received message from Camera: op=State serial=349705
08:11:19 GetSingleValue result=40  Value=cccccccc
08:11:19 SkyScan query
08:11:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:11:20 Parameters OK
08:11:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:11:20 Set A/D data flow result=40
08:11:20 Set A/D channel type result=40
08:11:20 Set A/D encoding result=40
08:11:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:11:20 Set channel filter=0.000000e+000  result=40
08:11:20 Config A/D  Result=40
08:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:11:20 Get A/D filter: -9.255963e+061  result=40
08:11:20 Get A/D value=-858993460  result=40
08:11:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:11:20 Parameters OK
08:11:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:11:20 Set A/D data flow result=40
08:11:20 Set A/D channel type result=40
08:11:20 Set A/D encoding result=40
08:11:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:11:20 Set channel filter=0.000000e+000  result=40
08:11:20 Config A/D  Result=40
08:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:11:20 Get A/D filter: -9.255963e+061  result=40
08:11:20 Get A/D value=-858993460  result=40
08:11:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:11:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:11:20 Aux=
08:11:20 Message to Camera, serial 349705 queued
08:11:56 Received message from Master: op=PointingHead serial=349718
08:11:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:11:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:11:57 Point started: ret=0
08:11:57 point_skyscan result=0
08:11:58 Check angles
08:11:58 SkyScan query
08:11:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:11:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:11:58 Message to Master queued w/err=0: serial=349718 error=0
08:12:03 Received message from Master: op=Filter serial=349719
08:12:03 Color wheel filter change from 0 to 0
08:12:03 FLIGetFilterPos err=0  currentPosition=0
08:12:03 FLIGetStepsRemaining err=0  RemainingSteps=0
08:12:03 Filter is already there-color wheel unchanged
08:12:03 Received message from Master: op=Shutter serial=349720
08:12:03 Shutter LASER close
08:12:03 Received message from Camera: op=State serial=349722
08:12:03 GetSingleValue result=40  Value=cccccccc
08:12:03 SkyScan query
08:12:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:04 Parameters OK
08:12:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:04 Set A/D data flow result=40
08:12:04 Set A/D channel type result=40
08:12:04 Set A/D encoding result=40
08:12:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:04 Set channel filter=0.000000e+000  result=40
08:12:04 Config A/D  Result=40
08:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:04 Get A/D filter: -9.255963e+061  result=40
08:12:04 Get A/D value=-858993460  result=40
08:12:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:04 Parameters OK
08:12:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:04 Set A/D data flow result=40
08:12:04 Set A/D channel type result=40
08:12:04 Set A/D encoding result=40
08:12:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:04 Set channel filter=0.000000e+000  result=40
08:12:04 Config A/D  Result=40
08:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:04 Get A/D filter: -9.255963e+061  result=40
08:12:04 Get A/D value=-858993460  result=40
08:12:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:12:04 Aux=
08:12:04 Message to Camera, serial 349722 queued
08:12:41 Received message from Master: op=PointingHead serial=349735
08:12:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:12:41 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:12:41 Point started: ret=0
08:12:41 point_skyscan result=0
08:12:42 Check angles
08:12:42 SkyScan query
08:12:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.22<-13548  Statuses=0008 0009
08:12:42 Msec=0  True Az=112.995  Ze=-23.22  Az status=0008  Ze status=0009
08:12:43 Check angles
08:12:43 SkyScan query
08:12:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.625<-14975  Statuses=0008 0009
08:12:43 Msec=750  True Az=112.995  Ze=-44.625  Az status=0008  Ze status=0009
08:12:43 Check angles
08:12:43 SkyScan query
08:12:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.58<-16372  Statuses=0008 0009
08:12:44 Msec=1500  True Az=112.995  Ze=-65.58  Az status=0008  Ze status=0009
08:12:44 Check angles
08:12:44 SkyScan query
08:12:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.535<-17769  Statuses=0008 0009
08:12:45 Msec=2250  True Az=112.995  Ze=-86.535  Az status=0008  Ze status=0009
08:12:45 Check angles
08:12:45 SkyScan query
08:12:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.925<-19195  Statuses=0008 0009
08:12:45 Msec=3000  True Az=112.995  Ze=-107.925  Az status=0008  Ze status=0009
08:12:46 Check angles
08:12:46 SkyScan query
08:12:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.865<-20591  Statuses=0008 0009
08:12:46 Msec=3750  True Az=112.995  Ze=-128.865  Az status=0008  Ze status=0009
08:12:46 Check angles
08:12:46 SkyScan query
08:12:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.82<-21988  Statuses=0008 0009
08:12:47 Msec=4500  True Az=112.995  Ze=-149.82  Az status=0008  Ze status=0009
08:12:47 Check angles
08:12:47 SkyScan query
08:12:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.7<-23380  Statuses=0008 0009
08:12:48 Msec=5250  True Az=112.995  Ze=-170.7  Az status=0008  Ze status=0009
08:12:48 Check angles
08:12:48 SkyScan query
08:12:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:12:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:12:48 Message to Master queued w/err=0: serial=349735 error=0
08:12:53 Received message from Master: op=Filter serial=349736
08:12:53 Color wheel filter change from 0 to 0
08:12:53 FLIGetFilterPos err=0  currentPosition=0
08:12:53 FLIGetStepsRemaining err=0  RemainingSteps=0
08:12:53 Filter is already there-color wheel unchanged
08:12:54 Received message from Master: op=Shutter serial=349737
08:12:54 Shutter LASER open
08:12:54 Received message from Camera: op=State serial=349739
08:12:54 GetSingleValue result=40  Value=cccccccc
08:12:54 SkyScan query
08:12:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:12:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:54 Parameters OK
08:12:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:54 Set A/D data flow result=40
08:12:54 Set A/D channel type result=40
08:12:54 Set A/D encoding result=40
08:12:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:54 Set channel filter=0.000000e+000  result=40
08:12:54 Config A/D  Result=40
08:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:54 Get A/D filter: -9.255963e+061  result=40
08:12:54 Get A/D value=-858993460  result=40
08:12:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:54 Parameters OK
08:12:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:54 Set A/D data flow result=40
08:12:54 Set A/D channel type result=40
08:12:54 Set A/D encoding result=40
08:12:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:54 Set channel filter=0.000000e+000  result=40
08:12:54 Config A/D  Result=40
08:12:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:54 Get A/D filter: -9.255963e+061  result=40
08:12:54 Get A/D value=-858993460  result=40
08:12:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:12:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:12:54 Aux=
08:12:54 Message to Camera, serial 349739 queued
08:13:03 Received message from Master: op=Shutter serial=349749
08:13:03 Shutter LASER close
08:13:03 Received message from Master: op=PointingHead serial=349753
08:13:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:13:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:13:04 Point started: ret=0
08:13:04 point_skyscan result=0
08:13:05 Check angles
08:13:05 SkyScan query
08:13:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.695<-21513  Statuses=0008 0009
08:13:05 Msec=0  True Az=112.995  Ze=-142.695  Az status=0008  Ze status=0009
08:13:05 Check angles
08:13:05 SkyScan query
08:13:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
08:13:06 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
08:13:06 Check angles
08:13:06 SkyScan query
08:13:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
08:13:07 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
08:13:07 Check angles
08:13:07 SkyScan query
08:13:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.83<-17322  Statuses=0008 0009
08:13:07 Msec=2250  True Az=112.995  Ze=-79.83  Az status=0008  Ze status=0009
08:13:08 Check angles
08:13:08 SkyScan query
08:13:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.875<-15925  Statuses=0008 0009
08:13:08 Msec=3000  True Az=112.995  Ze=-58.875  Az status=0008  Ze status=0009
08:13:08 Check angles
08:13:08 SkyScan query
08:13:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.47<-14498  Statuses=0008 0009
08:13:09 Msec=3750  True Az=112.995  Ze=-37.47  Az status=0008  Ze status=0009
08:13:09 Check angles
08:13:09 SkyScan query
08:13:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.485<-13099  Statuses=0008 0009
08:13:10 Msec=4500  True Az=112.995  Ze=-16.485  Az status=0008  Ze status=0009
08:13:10 Check angles
08:13:10 SkyScan query
08:13:10 SkyScan query done: ret=0  az=112.995<-7533  ze=4.365<-11709  Statuses=0008 0009
08:13:10 Msec=5250  True Az=112.995  Ze=4.365  Az status=0008  Ze status=0009
08:13:11 Check angles
08:13:11 SkyScan query
08:13:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:13:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:13:11 Message to Master queued w/err=0: serial=349753 error=0
08:13:16 Received message from Master: op=Filter serial=349754
08:13:16 Color wheel filter change from 0 to 0
08:13:16 FLIGetFilterPos err=0  currentPosition=0
08:13:16 FLIGetStepsRemaining err=0  RemainingSteps=0
08:13:16 Filter is already there-color wheel unchanged
08:13:16 Received message from Master: op=Shutter serial=349755
08:13:16 Shutter LASER close
08:13:17 Received message from Camera: op=State serial=349757
08:13:17 GetSingleValue result=40  Value=cccccccc
08:13:17 SkyScan query
08:13:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:13:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:13:17 Parameters OK
08:13:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:13:17 Set A/D data flow result=40
08:13:17 Set A/D channel type result=40
08:13:17 Set A/D encoding result=40
08:13:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:13:17 Set channel filter=0.000000e+000  result=40
08:13:17 Config A/D  Result=40
08:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:13:17 Get A/D filter: -9.255963e+061  result=40
08:13:17 Get A/D value=-858993460  result=40
08:13:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:13:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:13:17 Parameters OK
08:13:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:13:17 Set A/D data flow result=40
08:13:17 Set A/D channel type result=40
08:13:17 Set A/D encoding result=40
08:13:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:13:17 Set channel filter=0.000000e+000  result=40
08:13:17 Config A/D  Result=40
08:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:13:17 Get A/D filter: -9.255963e+061  result=40
08:13:17 Get A/D value=-858993460  result=40
08:13:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:13:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:13:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:13:17 Aux=
08:13:17 Message to Camera, serial 349757 queued
08:13:54 Received message from Master: op=PointingHead serial=349770
08:13:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:13:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:13:54 Point started: ret=0
08:13:54 point_skyscan result=0
08:13:55 Check angles
08:13:55 SkyScan query
08:13:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:13:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:13:56 Message to Master queued w/err=0: serial=349770 error=0
08:14:01 Received message from Master: op=Filter serial=349771
08:14:01 Color wheel filter change from 0 to 0
08:14:01 FLIGetFilterPos err=0  currentPosition=0
08:14:01 FLIGetStepsRemaining err=0  RemainingSteps=0
08:14:01 Filter is already there-color wheel unchanged
08:14:01 Received message from Master: op=Shutter serial=349772
08:14:01 Shutter LASER close
08:14:01 Received message from Camera: op=State serial=349774
08:14:01 GetSingleValue result=40  Value=cccccccc
08:14:01 SkyScan query
08:14:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:14:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:14:01 Parameters OK
08:14:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:14:01 Set A/D data flow result=40
08:14:01 Set A/D channel type result=40
08:14:01 Set A/D encoding result=40
08:14:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:14:01 Set channel filter=0.000000e+000  result=40
08:14:01 Config A/D  Result=40
08:14:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:14:01 Get A/D filter: -9.255963e+061  result=40
08:14:01 Get A/D value=-858993460  result=40
08:14:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:14:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:14:01 Parameters OK
08:14:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:14:01 Set A/D data flow result=40
08:14:01 Set A/D channel type result=40
08:14:01 Set A/D encoding result=40
08:14:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:14:01 Set channel filter=0.000000e+000  result=40
08:14:01 Config A/D  Result=40
08:14:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:14:01 Get A/D filter: -9.255963e+061  result=40
08:14:01 Get A/D value=-858993460  result=40
08:14:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:14:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:14:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:14:01 Aux=
08:14:01 Message to Camera, serial 349774 queued
08:14:38 Received message from Master: op=PointingHead serial=349787
08:14:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:14:38 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:14:39 Point started: ret=0
08:14:39 point_skyscan result=0
08:14:39 Check angles
08:14:39 SkyScan query
08:14:40 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.51<-12434  Statuses=0009 0008
08:14:40 Msec=0  True Az=135.9  Ze=-6.51  Az status=0009  Ze status=0008
08:14:40 Check angles
08:14:40 SkyScan query
08:14:41 SkyScan query done: ret=0  az=153.45<-10230  ze=-6.495<-12433  Statuses=0009 0008
[UTC 2019-3-19  08:14:41]
08:14:41 Msec=750  True Az=153.45  Ze=-6.495  Az status=0009  Ze status=0008
08:14:41 Check angles
08:14:41 SkyScan query
08:14:41 SkyScan query done: ret=0  az=171.24<-11416  ze=-6.495<-12433  Statuses=0009 0008
08:14:41 Msec=1500  True Az=171.24  Ze=-6.495  Az status=0009  Ze status=0008
08:14:42 Check angles
08:14:42 SkyScan query
08:14:42 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:14:42 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:14:42 Message to Master queued w/err=0: serial=349787 error=0
08:14:47 Received message from Master: op=Filter serial=349788
08:14:47 Color wheel filter change from 0 to 0
08:14:47 FLIGetFilterPos err=0  currentPosition=0
08:14:47 FLIGetStepsRemaining err=0  RemainingSteps=0
08:14:47 Filter is already there-color wheel unchanged
08:14:47 Received message from Master: op=Shutter serial=349789
08:14:47 Shutter LASER close
08:14:47 Received message from Camera: op=State serial=349791
08:14:47 GetSingleValue result=40  Value=cccccccc
08:14:47 SkyScan query
08:14:48 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:14:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:14:48 Parameters OK
08:14:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:14:48 Set A/D data flow result=40
08:14:48 Set A/D channel type result=40
08:14:48 Set A/D encoding result=40
08:14:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:14:48 Set channel filter=0.000000e+000  result=40
08:14:48 Config A/D  Result=40
08:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:14:48 Get A/D filter: -9.255963e+061  result=40
08:14:48 Get A/D value=-858993460  result=40
08:14:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:14:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:14:48 Parameters OK
08:14:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:14:48 Set A/D data flow result=40
08:14:48 Set A/D channel type result=40
08:14:48 Set A/D encoding result=40
08:14:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:14:48 Set channel filter=0.000000e+000  result=40
08:14:48 Config A/D  Result=40
08:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:14:48 Get A/D filter: -9.255963e+061  result=40
08:14:48 Get A/D value=-858993460  result=40
08:14:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:14:48 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:14:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:14:48 Aux=
08:14:48 Message to Camera, serial 349791 queued
08:15:25 Received message from Master: op=PointingHead serial=349804
08:15:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:15:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:15:25 Point started: ret=0
08:15:25 point_skyscan result=0
08:15:26 Check angles
08:15:26 SkyScan query
08:15:26 SkyScan query done: ret=0  az=152.775<-10185  ze=6.51<-11566  Statuses=0009 0008
08:15:26 Msec=0  True Az=152.775  Ze=6.51  Az status=0009  Ze status=0008
08:15:27 Check angles
08:15:27 SkyScan query
08:15:27 SkyScan query done: ret=0  az=135.36<-9024  ze=6.495<-11567  Statuses=0009 0008
08:15:27 Msec=750  True Az=135.36  Ze=6.495  Az status=0009  Ze status=0008
08:15:27 Check angles
08:15:27 SkyScan query
08:15:28 SkyScan query done: ret=0  az=117.525<-7835  ze=6.495<-11567  Statuses=0009 0008
08:15:28 Msec=1500  True Az=117.525  Ze=6.495  Az status=0009  Ze status=0008
08:15:28 Check angles
08:15:28 SkyScan query
08:15:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:15:29 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:15:29 Message to Master queued w/err=0: serial=349804 error=0
08:15:34 Received message from Master: op=Filter serial=349805
08:15:34 Color wheel filter change from 0 to 0
08:15:34 FLIGetFilterPos err=0  currentPosition=0
08:15:34 FLIGetStepsRemaining err=0  RemainingSteps=0
08:15:34 Filter is already there-color wheel unchanged
08:15:34 Received message from Master: op=Shutter serial=349806
08:15:34 Shutter LASER close
08:15:34 Received message from Camera: op=State serial=349808
08:15:34 GetSingleValue result=40  Value=cccccccc
08:15:34 SkyScan query
08:15:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:15:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:15:35 Parameters OK
08:15:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:15:35 Set A/D data flow result=40
08:15:35 Set A/D channel type result=40
08:15:35 Set A/D encoding result=40
08:15:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:15:35 Set channel filter=0.000000e+000  result=40
08:15:35 Config A/D  Result=40
08:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:15:35 Get A/D filter: -9.255963e+061  result=40
08:15:35 Get A/D value=-858993460  result=40
08:15:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:15:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:15:35 Parameters OK
08:15:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:15:35 Set A/D data flow result=40
08:15:35 Set A/D channel type result=40
08:15:35 Set A/D encoding result=40
08:15:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:15:35 Set channel filter=0.000000e+000  result=40
08:15:35 Config A/D  Result=40
08:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:15:35 Get A/D filter: -9.255963e+061  result=40
08:15:35 Get A/D value=-858993460  result=40
08:15:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:15:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:15:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:15:35 Aux=
08:15:35 Message to Camera, serial 349808 queued
08:16:11 Received message from Master: op=PointingHead serial=349821
08:16:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:16:11 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:16:12 Point started: ret=0
08:16:12 point_skyscan result=0
08:16:12 Check angles
08:16:12 SkyScan query
08:16:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.235<-13549  Statuses=0008 0009
08:16:13 Msec=0  True Az=112.995  Ze=-23.235  Az status=0008  Ze status=0009
08:16:13 Check angles
08:16:13 SkyScan query
08:16:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.19<-14946  Statuses=0008 0009
08:16:14 Msec=750  True Az=112.995  Ze=-44.19  Az status=0008  Ze status=0009
08:16:14 Check angles
08:16:14 SkyScan query
08:16:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.58<-16372  Statuses=0008 0009
08:16:15 Msec=1500  True Az=112.995  Ze=-65.58  Az status=0008  Ze status=0009
08:16:15 Check angles
08:16:15 SkyScan query
08:16:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.535<-17769  Statuses=0008 0009
08:16:15 Msec=2250  True Az=112.995  Ze=-86.535  Az status=0008  Ze status=0009
08:16:15 Check angles
08:16:15 SkyScan query
08:16:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.475<-19165  Statuses=0008 0009
08:16:16 Msec=3000  True Az=112.995  Ze=-107.475  Az status=0008  Ze status=0009
08:16:16 Check angles
08:16:16 SkyScan query
08:16:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.85<-20590  Statuses=0008 0009
08:16:17 Msec=3750  True Az=112.995  Ze=-128.85  Az status=0008  Ze status=0009
08:16:17 Check angles
08:16:17 SkyScan query
08:16:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.27<-22018  Statuses=0008 0009
08:16:18 Msec=4500  True Az=112.995  Ze=-150.27  Az status=0008  Ze status=0009
08:16:18 Check angles
08:16:18 SkyScan query
08:16:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.075<-23405  Statuses=0008 0009
08:16:18 Msec=5250  True Az=112.995  Ze=-171.075  Az status=0008  Ze status=0009
08:16:19 Check angles
08:16:19 SkyScan query
08:16:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:16:19 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:16:19 Message to Master queued w/err=0: serial=349821 error=0
08:16:24 Received message from Master: op=Filter serial=349822
08:16:24 Color wheel filter change from 0 to 0
08:16:24 FLIGetFilterPos err=0  currentPosition=0
08:16:24 FLIGetStepsRemaining err=0  RemainingSteps=0
08:16:24 Filter is already there-color wheel unchanged
08:16:24 Received message from Master: op=Shutter serial=349823
08:16:24 Shutter LASER open
08:16:24 Received message from Camera: op=State serial=349825
08:16:24 GetSingleValue result=40  Value=cccccccc
08:16:24 SkyScan query
08:16:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:16:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:25 Parameters OK
08:16:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:25 Set A/D data flow result=40
08:16:25 Set A/D channel type result=40
08:16:25 Set A/D encoding result=40
08:16:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:25 Set channel filter=0.000000e+000  result=40
08:16:25 Config A/D  Result=40
08:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:25 Get A/D filter: -9.255963e+061  result=40
08:16:25 Get A/D value=-858993460  result=40
08:16:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:25 Parameters OK
08:16:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:25 Set A/D data flow result=40
08:16:25 Set A/D channel type result=40
08:16:25 Set A/D encoding result=40
08:16:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:25 Set channel filter=0.000000e+000  result=40
08:16:25 Config A/D  Result=40
08:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:25 Get A/D filter: -9.255963e+061  result=40
08:16:25 Get A/D value=-858993460  result=40
08:16:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:16:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:16:25 Aux=
08:16:25 Message to Camera, serial 349825 queued
08:16:33 Received message from Master: op=Shutter serial=349835
08:16:33 Shutter LASER close
08:16:34 Received message from Master: op=PointingHead serial=349839
08:16:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:16:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:16:34 Point started: ret=0
08:16:34 point_skyscan result=0
08:16:35 Check angles
08:16:35 SkyScan query
08:16:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.785<-21519  Statuses=0008 0009
08:16:36 Msec=0  True Az=112.995  Ze=-142.785  Az status=0008  Ze status=0009
08:16:36 Check angles
08:16:36 SkyScan query
08:16:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.41<-20094  Statuses=0008 0009
08:16:36 Msec=750  True Az=112.995  Ze=-121.41  Az status=0008  Ze status=0009
08:16:37 Check angles
08:16:37 SkyScan query
08:16:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.455<-18697  Statuses=0008 0009
08:16:37 Msec=1500  True Az=112.995  Ze=-100.455  Az status=0008  Ze status=0009
08:16:37 Check angles
08:16:37 SkyScan query
08:16:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.035<-17269  Statuses=0008 0009
08:16:38 Msec=2250  True Az=112.995  Ze=-79.035  Az status=0008  Ze status=0009
08:16:38 Check angles
08:16:38 SkyScan query
08:16:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.66<-15844  Statuses=0008 0009
08:16:39 Msec=3000  True Az=112.995  Ze=-57.66  Az status=0008  Ze status=0009
08:16:39 Check angles
08:16:39 SkyScan query
08:16:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.24<-14416  Statuses=0008 0009
08:16:39 Msec=3750  True Az=112.995  Ze=-36.24  Az status=0008  Ze status=0009
08:16:40 Check angles
08:16:40 SkyScan query
08:16:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.3<-13020  Statuses=0008 0009
08:16:40 Msec=4500  True Az=112.995  Ze=-15.3  Az status=0008  Ze status=0009
08:16:40 Check angles
08:16:40 SkyScan query
08:16:41 SkyScan query done: ret=0  az=112.995<-7533  ze=5.52<-11632  Statuses=0008 0009
08:16:41 Msec=5250  True Az=112.995  Ze=5.52  Az status=0008  Ze status=0009
08:16:41 Check angles
08:16:41 SkyScan query
08:16:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:16:42 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:16:42 Message to Master queued w/err=0: serial=349839 error=0
08:16:47 Received message from Master: op=Filter serial=349840
08:16:47 Color wheel filter change from 0 to 0
08:16:47 FLIGetFilterPos err=0  currentPosition=0
08:16:47 FLIGetStepsRemaining err=0  RemainingSteps=0
08:16:47 Filter is already there-color wheel unchanged
08:16:47 Received message from Master: op=Shutter serial=349841
08:16:47 Shutter LASER close
08:16:47 Received message from Camera: op=State serial=349843
08:16:47 GetSingleValue result=40  Value=cccccccc
08:16:47 SkyScan query
08:16:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:48 Parameters OK
08:16:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:48 Set A/D data flow result=40
08:16:48 Set A/D channel type result=40
08:16:48 Set A/D encoding result=40
08:16:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:48 Set channel filter=0.000000e+000  result=40
08:16:48 Config A/D  Result=40
08:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:48 Get A/D filter: -9.255963e+061  result=40
08:16:48 Get A/D value=-858993460  result=40
08:16:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:48 Parameters OK
08:16:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:48 Set A/D data flow result=40
08:16:48 Set A/D channel type result=40
08:16:48 Set A/D encoding result=40
08:16:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:48 Set channel filter=0.000000e+000  result=40
08:16:48 Config A/D  Result=40
08:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:48 Get A/D filter: -9.255963e+061  result=40
08:16:48 Get A/D value=-858993460  result=40
08:16:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:16:48 Aux=
08:16:48 Message to Camera, serial 349843 queued
08:17:24 Received message from Master: op=PointingHead serial=349856
08:17:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:17:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:17:25 Point started: ret=0
08:17:25 point_skyscan result=0
08:17:26 Check angles
08:17:26 SkyScan query
08:17:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:17:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:17:26 Message to Master queued w/err=0: serial=349856 error=0
08:17:31 Received message from Master: op=Filter serial=349857
08:17:31 Color wheel filter change from 0 to 0
08:17:31 FLIGetFilterPos err=0  currentPosition=0
08:17:31 FLIGetStepsRemaining err=0  RemainingSteps=0
08:17:31 Filter is already there-color wheel unchanged
08:17:31 Received message from Master: op=Shutter serial=349858
08:17:31 Shutter LASER close
08:17:31 Received message from Camera: op=State serial=349860
08:17:31 GetSingleValue result=40  Value=cccccccc
08:17:31 SkyScan query
08:17:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:17:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:17:32 Parameters OK
08:17:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:17:32 Set A/D data flow result=40
08:17:32 Set A/D channel type result=40
08:17:32 Set A/D encoding result=40
08:17:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:17:32 Set channel filter=0.000000e+000  result=40
08:17:32 Config A/D  Result=40
08:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:17:32 Get A/D filter: -9.255963e+061  result=40
08:17:32 Get A/D value=-858993460  result=40
08:17:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:17:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:17:32 Parameters OK
08:17:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:17:32 Set A/D data flow result=40
08:17:32 Set A/D channel type result=40
08:17:32 Set A/D encoding result=40
08:17:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:17:32 Set channel filter=0.000000e+000  result=40
08:17:32 Config A/D  Result=40
08:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:17:32 Get A/D filter: -9.255963e+061  result=40
08:17:32 Get A/D value=-858993460  result=40
08:17:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:17:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:17:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:17:32 Aux=
08:17:32 Message to Camera, serial 349860 queued
08:18:09 Received message from Master: op=PointingHead serial=349873
08:18:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:18:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:18:09 Point started: ret=0
08:18:09 point_skyscan result=0
08:18:10 Check angles
08:18:10 SkyScan query
08:18:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:18:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:18:10 Message to Master queued w/err=0: serial=349873 error=0
08:18:15 Received message from Master: op=Filter serial=349874
08:18:15 Color wheel filter change from 0 to 0
08:18:15 FLIGetFilterPos err=0  currentPosition=0
08:18:15 FLIGetStepsRemaining err=0  RemainingSteps=0
08:18:15 Filter is already there-color wheel unchanged
08:18:16 Received message from Master: op=Shutter serial=349875
08:18:16 Shutter LASER close
08:18:16 Received message from Camera: op=State serial=349877
08:18:16 GetSingleValue result=40  Value=cccccccc
08:18:16 SkyScan query
08:18:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:18:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:18:16 Parameters OK
08:18:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:18:16 Set A/D data flow result=40
08:18:16 Set A/D channel type result=40
08:18:16 Set A/D encoding result=40
08:18:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:18:16 Set channel filter=0.000000e+000  result=40
08:18:16 Config A/D  Result=40
08:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:18:16 Get A/D filter: -9.255963e+061  result=40
08:18:16 Get A/D value=-858993460  result=40
08:18:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:18:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:18:16 Parameters OK
08:18:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:18:16 Set A/D data flow result=40
08:18:16 Set A/D channel type result=40
08:18:16 Set A/D encoding result=40
08:18:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:18:16 Set channel filter=0.000000e+000  result=40
08:18:16 Config A/D  Result=40
08:18:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:18:16 Get A/D filter: -9.255963e+061  result=40
08:18:16 Get A/D value=-858993460  result=40
08:18:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:18:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:18:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:18:16 Aux=
08:18:16 Message to Camera, serial 349877 queued
08:18:53 Received message from Master: op=PointingHead serial=349890
08:18:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:18:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:18:53 Point started: ret=0
08:18:53 point_skyscan result=0
08:18:54 Check angles
08:18:54 SkyScan query
08:18:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:18:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:18:55 Message to Master queued w/err=0: serial=349890 error=0
08:19:00 Received message from Master: op=Filter serial=349891
08:19:00 Color wheel filter change from 0 to 0
08:19:00 FLIGetFilterPos err=0  currentPosition=0
08:19:00 FLIGetStepsRemaining err=0  RemainingSteps=0
08:19:00 Filter is already there-color wheel unchanged
08:19:00 Received message from Master: op=Shutter serial=349892
08:19:00 Shutter LASER close
08:19:00 Received message from Camera: op=State serial=349894
08:19:00 GetSingleValue result=40  Value=cccccccc
08:19:00 SkyScan query
08:19:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:19:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:01 Parameters OK
08:19:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:01 Set A/D data flow result=40
08:19:01 Set A/D channel type result=40
08:19:01 Set A/D encoding result=40
08:19:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:01 Set channel filter=0.000000e+000  result=40
08:19:01 Config A/D  Result=40
08:19:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:01 Get A/D filter: -9.255963e+061  result=40
08:19:01 Get A/D value=-858993460  result=40
08:19:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:01 Parameters OK
08:19:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:01 Set A/D data flow result=40
08:19:01 Set A/D channel type result=40
08:19:01 Set A/D encoding result=40
08:19:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:01 Set channel filter=0.000000e+000  result=40
08:19:01 Config A/D  Result=40
08:19:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:01 Get A/D filter: -9.255963e+061  result=40
08:19:01 Get A/D value=-858993460  result=40
08:19:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:19:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:19:01 Aux=
08:19:01 Message to Camera, serial 349894 queued
08:19:37 Received message from Master: op=PointingHead serial=349907
08:19:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:19:37 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:19:38 Point started: ret=0
08:19:38 point_skyscan result=0
08:19:38 Check angles
08:19:38 SkyScan query
08:19:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
08:19:39 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
08:19:39 Check angles
08:19:39 SkyScan query
08:19:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
08:19:40 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
08:19:40 Check angles
08:19:40 SkyScan query
08:19:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
08:19:41 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
08:19:41 Check angles
08:19:41 SkyScan query
08:19:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
08:19:41 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
08:19:41 Check angles
08:19:41 SkyScan query
08:19:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
08:19:42 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
08:19:42 Check angles
08:19:42 SkyScan query
08:19:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.565<-20571  Statuses=0008 0009
08:19:43 Msec=3750  True Az=112.995  Ze=-128.565  Az status=0008  Ze status=0009
08:19:43 Check angles
08:19:43 SkyScan query
08:19:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.535<-21969  Statuses=0008 0009
08:19:44 Msec=4500  True Az=112.995  Ze=-149.535  Az status=0008  Ze status=0009
08:19:44 Check angles
08:19:44 SkyScan query
08:19:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.46<-23364  Statuses=0008 0009
08:19:44 Msec=5250  True Az=112.995  Ze=-170.46  Az status=0008  Ze status=0009
08:19:44 Check angles
08:19:44 SkyScan query
08:19:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:19:45 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:19:45 Message to Master queued w/err=0: serial=349907 error=0
08:19:50 Received message from Master: op=Filter serial=349908
08:19:50 Color wheel filter change from 0 to 0
08:19:50 FLIGetFilterPos err=0  currentPosition=0
08:19:50 FLIGetStepsRemaining err=0  RemainingSteps=0
08:19:50 Filter is already there-color wheel unchanged
08:19:50 Received message from Master: op=Shutter serial=349909
08:19:50 Shutter LASER open
08:19:50 Received message from Camera: op=State serial=349911
08:19:50 GetSingleValue result=40  Value=cccccccc
08:19:50 SkyScan query
08:19:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:19:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:51 Parameters OK
08:19:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:51 Set A/D data flow result=40
08:19:51 Set A/D channel type result=40
08:19:51 Set A/D encoding result=40
08:19:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:51 Set channel filter=0.000000e+000  result=40
08:19:51 Config A/D  Result=40
08:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:51 Get A/D filter: -9.255963e+061  result=40
08:19:51 Get A/D value=-858993460  result=40
08:19:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:51 Parameters OK
08:19:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:51 Set A/D data flow result=40
08:19:51 Set A/D channel type result=40
08:19:51 Set A/D encoding result=40
08:19:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:51 Set channel filter=0.000000e+000  result=40
08:19:51 Config A/D  Result=40
08:19:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:51 Get A/D filter: -9.255963e+061  result=40
08:19:51 Get A/D value=-858993460  result=40
08:19:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:19:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:19:51 Aux=
08:19:51 Message to Camera, serial 349911 queued
08:19:58 Received message from Master: op=Shutter serial=349920
08:19:58 Shutter LASER close
08:19:59 Received message from Master: op=PointingHead serial=349924
08:19:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:19:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:19:59 Point started: ret=0
08:19:59 point_skyscan result=0
08:20:00 Check angles
08:20:00 SkyScan query
08:20:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.89<-21526  Statuses=0008 0009
08:20:01 Msec=0  True Az=112.995  Ze=-142.89  Az status=0008  Ze status=0009
08:20:01 Check angles
08:20:01 SkyScan query
08:20:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.89<-20126  Statuses=0008 0009
08:20:01 Msec=750  True Az=112.995  Ze=-121.89  Az status=0008  Ze status=0009
08:20:02 Check angles
08:20:02 SkyScan query
08:20:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.965<-18731  Statuses=0008 0009
08:20:02 Msec=1500  True Az=112.995  Ze=-100.965  Az status=0008  Ze status=0009
08:20:02 Check angles
08:20:02 SkyScan query
08:20:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.575<-17305  Statuses=0008 0009
08:20:03 Msec=2250  True Az=112.995  Ze=-79.575  Az status=0008  Ze status=0009
08:20:03 Check angles
08:20:03 SkyScan query
08:20:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.605<-15907  Statuses=0008 0009
08:20:04 Msec=3000  True Az=112.995  Ze=-58.605  Az status=0008  Ze status=0009
08:20:04 Check angles
08:20:04 SkyScan query
08:20:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.665<-14511  Statuses=0008 0009
08:20:04 Msec=3750  True Az=112.995  Ze=-37.665  Az status=0008  Ze status=0009
08:20:05 Check angles
08:20:05 SkyScan query
08:20:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.71<-13114  Statuses=0008 0009
08:20:05 Msec=4500  True Az=112.995  Ze=-16.71  Az status=0008  Ze status=0009
08:20:05 Check angles
08:20:05 SkyScan query
08:20:06 SkyScan query done: ret=0  az=112.995<-7533  ze=4.215<-11719  Statuses=0008 0009
08:20:06 Msec=5250  True Az=112.995  Ze=4.215  Az status=0008  Ze status=0009
08:20:06 Check angles
08:20:06 SkyScan query
08:20:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:20:07 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:20:07 Message to Master queued w/err=0: serial=349924 error=0
08:20:12 Received message from Master: op=Filter serial=349925
08:20:12 Color wheel filter change from 0 to 0
08:20:12 FLIGetFilterPos err=0  currentPosition=0
08:20:12 FLIGetStepsRemaining err=0  RemainingSteps=0
08:20:12 Filter is already there-color wheel unchanged
08:20:12 Received message from Master: op=Shutter serial=349926
08:20:12 Shutter LASER close
08:20:12 Received message from Camera: op=State serial=349928
08:20:12 GetSingleValue result=40  Value=cccccccc
08:20:12 SkyScan query
08:20:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:20:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:20:13 Parameters OK
08:20:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:20:13 Set A/D data flow result=40
08:20:13 Set A/D channel type result=40
08:20:13 Set A/D encoding result=40
08:20:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:20:13 Set channel filter=0.000000e+000  result=40
08:20:13 Config A/D  Result=40
08:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:20:13 Get A/D filter: -9.255963e+061  result=40
08:20:13 Get A/D value=-858993460  result=40
08:20:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:20:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:20:13 Parameters OK
08:20:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:20:13 Set A/D data flow result=40
08:20:13 Set A/D channel type result=40
08:20:13 Set A/D encoding result=40
08:20:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:20:13 Set channel filter=0.000000e+000  result=40
08:20:13 Config A/D  Result=40
08:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:20:13 Get A/D filter: -9.255963e+061  result=40
08:20:13 Get A/D value=-858993460  result=40
08:20:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:20:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:20:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:20:13 Aux=
08:20:13 Message to Camera, serial 349928 queued
08:20:50 Received message from Master: op=PointingHead serial=349941
08:20:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:20:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:20:50 Point started: ret=0
08:20:50 point_skyscan result=0
08:20:51 Check angles
08:20:51 SkyScan query
08:20:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:20:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:20:51 Message to Master queued w/err=0: serial=349941 error=0
08:20:56 Received message from Master: op=Filter serial=349942
08:20:56 Color wheel filter change from 0 to 0
08:20:56 FLIGetFilterPos err=0  currentPosition=0
08:20:56 FLIGetStepsRemaining err=0  RemainingSteps=0
08:20:56 Filter is already there-color wheel unchanged
08:20:56 Received message from Master: op=Shutter serial=349943
08:20:56 Shutter LASER close
08:20:56 Received message from Camera: op=State serial=349945
08:20:56 GetSingleValue result=40  Value=cccccccc
08:20:56 SkyScan query
08:20:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:20:57 Parameters OK
08:20:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:20:57 Set A/D data flow result=40
08:20:57 Set A/D channel type result=40
08:20:57 Set A/D encoding result=40
08:20:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:20:57 Set channel filter=0.000000e+000  result=40
08:20:57 Config A/D  Result=40
08:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:20:57 Get A/D filter: -9.255963e+061  result=40
08:20:57 Get A/D value=-858993460  result=40
08:20:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:20:57 Parameters OK
08:20:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:20:57 Set A/D data flow result=40
08:20:57 Set A/D channel type result=40
08:20:57 Set A/D encoding result=40
08:20:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:20:57 Set channel filter=0.000000e+000  result=40
08:20:57 Config A/D  Result=40
08:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:20:57 Get A/D filter: -9.255963e+061  result=40
08:20:57 Get A/D value=-858993460  result=40
08:20:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:20:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:20:57 Aux=
08:20:57 Message to Camera, serial 349945 queued
08:21:33 Received message from Master: op=PointingHead serial=349957
08:21:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:21:33 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:21:33 Point started: ret=0
08:21:33 point_skyscan result=0
08:21:34 Check angles
08:21:34 SkyScan query
08:21:35 SkyScan query done: ret=0  az=136.395<-9093  ze=-6.51<-12434  Statuses=0009 0008
08:21:35 Msec=0  True Az=136.395  Ze=-6.51  Az status=0009  Ze status=0008
08:21:35 Check angles
08:21:35 SkyScan query
08:21:35 SkyScan query done: ret=0  az=154.155<-10277  ze=-6.495<-12433  Statuses=0009 0008
08:21:35 Msec=750  True Az=154.155  Ze=-6.495  Az status=0009  Ze status=0008
08:21:36 Check angles
08:21:36 SkyScan query
08:21:36 SkyScan query done: ret=0  az=171.27<-11418  ze=-6.495<-12433  Statuses=0009 0008
08:21:36 Msec=1500  True Az=171.27  Ze=-6.495  Az status=0009  Ze status=0008
08:21:36 Check angles
08:21:36 SkyScan query
08:21:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:21:37 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:21:37 Message to Master queued w/err=0: serial=349957 error=0
08:21:42 Received message from Master: op=Filter serial=349958
08:21:42 Color wheel filter change from 0 to 0
08:21:42 FLIGetFilterPos err=0  currentPosition=0
08:21:42 FLIGetStepsRemaining err=0  RemainingSteps=0
08:21:42 Filter is already there-color wheel unchanged
08:21:42 Received message from Master: op=Shutter serial=349959
08:21:42 Shutter LASER close
08:21:42 Received message from Camera: op=State serial=349961
08:21:42 GetSingleValue result=40  Value=cccccccc
08:21:42 SkyScan query
08:21:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:21:43 Parameters OK
08:21:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:21:43 Set A/D data flow result=40
08:21:43 Set A/D channel type result=40
08:21:43 Set A/D encoding result=40
08:21:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:21:43 Set channel filter=0.000000e+000  result=40
08:21:43 Config A/D  Result=40
08:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:21:43 Get A/D filter: -9.255963e+061  result=40
08:21:43 Get A/D value=-858993460  result=40
08:21:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:21:43 Parameters OK
08:21:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:21:43 Set A/D data flow result=40
08:21:43 Set A/D channel type result=40
08:21:43 Set A/D encoding result=40
08:21:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:21:43 Set channel filter=0.000000e+000  result=40
08:21:43 Config A/D  Result=40
08:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:21:43 Get A/D filter: -9.255963e+061  result=40
08:21:43 Get A/D value=-858993460  result=40
08:21:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:21:43 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:21:43 Aux=
08:21:43 Message to Camera, serial 349961 queued
08:22:20 Received message from Master: op=PointingHead serial=349974
08:22:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:22:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:22:20 Point started: ret=0
08:22:20 point_skyscan result=0
08:22:21 Check angles
08:22:21 SkyScan query
08:22:21 SkyScan query done: ret=0  az=152.925<-10195  ze=6.51<-11566  Statuses=0009 0008
08:22:21 Msec=0  True Az=152.925  Ze=6.51  Az status=0009  Ze status=0008
08:22:21 Check angles
08:22:21 SkyScan query
08:22:22 SkyScan query done: ret=0  az=135.195<-9013  ze=6.495<-11567  Statuses=0009 0008
08:22:22 Msec=750  True Az=135.195  Ze=6.495  Az status=0009  Ze status=0008
08:22:22 Check angles
08:22:22 SkyScan query
08:22:23 SkyScan query done: ret=0  az=117.705<-7847  ze=6.495<-11567  Statuses=0009 0008
08:22:23 Msec=1500  True Az=117.705  Ze=6.495  Az status=0009  Ze status=0008
08:22:23 Check angles
08:22:23 SkyScan query
08:22:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:22:23 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:22:23 Message to Master queued w/err=0: serial=349974 error=0
08:22:28 Received message from Master: op=Filter serial=349975
08:22:28 Color wheel filter change from 0 to 0
08:22:28 FLIGetFilterPos err=0  currentPosition=0
08:22:28 FLIGetStepsRemaining err=0  RemainingSteps=0
08:22:28 Filter is already there-color wheel unchanged
08:22:29 Received message from Master: op=Shutter serial=349976
08:22:29 Shutter LASER close
08:22:29 Received message from Camera: op=State serial=349978
08:22:29 GetSingleValue result=40  Value=cccccccc
08:22:29 SkyScan query
08:22:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:22:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:22:29 Parameters OK
08:22:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:22:29 Set A/D data flow result=40
08:22:29 Set A/D channel type result=40
08:22:29 Set A/D encoding result=40
08:22:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:22:29 Set channel filter=0.000000e+000  result=40
08:22:29 Config A/D  Result=40
08:22:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:22:29 Get A/D filter: -9.255963e+061  result=40
08:22:29 Get A/D value=-858993460  result=40
08:22:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:22:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:22:29 Parameters OK
08:22:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:22:29 Set A/D data flow result=40
08:22:29 Set A/D channel type result=40
08:22:29 Set A/D encoding result=40
08:22:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:22:29 Set channel filter=0.000000e+000  result=40
08:22:29 Config A/D  Result=40
08:22:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:22:29 Get A/D filter: -9.255963e+061  result=40
08:22:29 Get A/D value=-858993460  result=40
08:22:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:22:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:22:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:22:29 Aux=
08:22:29 Message to Camera, serial 349978 queued
08:23:06 Received message from Master: op=PointingHead serial=349991
08:23:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:23:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:23:06 Point started: ret=0
08:23:06 point_skyscan result=0
08:23:07 Check angles
08:23:07 SkyScan query
08:23:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
08:23:08 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
08:23:08 Check angles
08:23:08 SkyScan query
08:23:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.01<-14934  Statuses=0008 0009
08:23:08 Msec=750  True Az=112.995  Ze=-44.01  Az status=0008  Ze status=0009
08:23:09 Check angles
08:23:09 SkyScan query
08:23:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.95<-16330  Statuses=0008 0009
08:23:09 Msec=1500  True Az=112.995  Ze=-64.95  Az status=0008  Ze status=0009
08:23:09 Check angles
08:23:09 SkyScan query
08:23:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.92<-17728  Statuses=0008 0009
08:23:10 Msec=2250  True Az=112.995  Ze=-85.92  Az status=0008  Ze status=0009
08:23:10 Check angles
08:23:10 SkyScan query
08:23:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.845<-19123  Statuses=0008 0009
08:23:11 Msec=3000  True Az=112.995  Ze=-106.845  Az status=0008  Ze status=0009
08:23:11 Check angles
08:23:11 SkyScan query
08:23:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.83<-20522  Statuses=0008 0009
08:23:11 Msec=3750  True Az=112.995  Ze=-127.83  Az status=0008  Ze status=0009
08:23:12 Check angles
08:23:12 SkyScan query
08:23:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.77<-21918  Statuses=0008 0009
08:23:12 Msec=4500  True Az=112.995  Ze=-148.77  Az status=0008  Ze status=0009
08:23:12 Check angles
08:23:12 SkyScan query
08:23:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.71<-23314  Statuses=0008 0009
08:23:13 Msec=5250  True Az=112.995  Ze=-169.71  Az status=0008  Ze status=0009
08:23:13 Check angles
08:23:13 SkyScan query
08:23:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:23:14 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:23:14 Message to Master queued w/err=0: serial=349991 error=0
08:23:19 Received message from Master: op=Filter serial=349992
08:23:19 Color wheel filter change from 0 to 0
08:23:19 FLIGetFilterPos err=0  currentPosition=0
08:23:19 FLIGetStepsRemaining err=0  RemainingSteps=0
08:23:19 Filter is already there-color wheel unchanged
08:23:19 Received message from Master: op=Shutter serial=349993
08:23:19 Shutter LASER open
08:23:19 Received message from Camera: op=State serial=349995
08:23:19 GetSingleValue result=40  Value=cccccccc
08:23:19 SkyScan query
08:23:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:20 Parameters OK
08:23:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:20 Set A/D data flow result=40
08:23:20 Set A/D channel type result=40
08:23:20 Set A/D encoding result=40
08:23:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:20 Set channel filter=0.000000e+000  result=40
08:23:20 Config A/D  Result=40
08:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:20 Get A/D filter: -9.255963e+061  result=40
08:23:20 Get A/D value=-858993460  result=40
08:23:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:20 Parameters OK
08:23:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:20 Set A/D data flow result=40
08:23:20 Set A/D channel type result=40
08:23:20 Set A/D encoding result=40
08:23:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:20 Set channel filter=0.000000e+000  result=40
08:23:20 Config A/D  Result=40
08:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:20 Get A/D filter: -9.255963e+061  result=40
08:23:20 Get A/D value=-858993460  result=40
08:23:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:23:20 Aux=
08:23:20 Message to Camera, serial 349995 queued
08:23:28 Received message from Master: op=Shutter serial=350005
08:23:28 Shutter LASER close
08:23:29 Received message from Master: op=PointingHead serial=350009
08:23:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:23:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:23:29 Point started: ret=0
08:23:29 point_skyscan result=0
08:23:30 Check angles
08:23:30 SkyScan query
08:23:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
08:23:30 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
08:23:30 Check angles
08:23:30 SkyScan query
08:23:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.07<-20138  Statuses=0008 0009
08:23:31 Msec=750  True Az=112.995  Ze=-122.07  Az status=0008  Ze status=0009
08:23:31 Check angles
08:23:31 SkyScan query
08:23:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
08:23:32 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
08:23:32 Check angles
08:23:32 SkyScan query
08:23:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.19<-17346  Statuses=0008 0009
08:23:32 Msec=2250  True Az=112.995  Ze=-80.19  Az status=0008  Ze status=0009
08:23:33 Check angles
08:23:33 SkyScan query
08:23:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.785<-15919  Statuses=0008 0009
08:23:33 Msec=3000  True Az=112.995  Ze=-58.785  Az status=0008  Ze status=0009
08:23:33 Check angles
08:23:33 SkyScan query
08:23:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.815<-14521  Statuses=0008 0009
08:23:34 Msec=3750  True Az=112.995  Ze=-37.815  Az status=0008  Ze status=0009
08:23:34 Check angles
08:23:34 SkyScan query
08:23:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
08:23:35 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
08:23:35 Check angles
08:23:35 SkyScan query
08:23:35 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
08:23:35 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
08:23:36 Check angles
08:23:36 SkyScan query
08:23:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:23:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:23:36 Message to Master queued w/err=0: serial=350009 error=0
08:23:41 Received message from Master: op=Filter serial=350010
08:23:41 Color wheel filter change from 0 to 0
08:23:41 FLIGetFilterPos err=0  currentPosition=0
08:23:41 FLIGetStepsRemaining err=0  RemainingSteps=0
08:23:41 Filter is already there-color wheel unchanged
08:23:41 Received message from Master: op=Shutter serial=350011
08:23:41 Shutter LASER close
08:23:42 Received message from Camera: op=State serial=350013
08:23:42 GetSingleValue result=40  Value=cccccccc
08:23:42 SkyScan query
08:23:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:23:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:42 Parameters OK
08:23:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:42 Set A/D data flow result=40
08:23:42 Set A/D channel type result=40
08:23:42 Set A/D encoding result=40
08:23:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:42 Set channel filter=0.000000e+000  result=40
08:23:42 Config A/D  Result=40
08:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:42 Get A/D filter: -9.255963e+061  result=40
08:23:42 Get A/D value=-858993460  result=40
08:23:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:42 Parameters OK
08:23:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:42 Set A/D data flow result=40
08:23:42 Set A/D channel type result=40
08:23:42 Set A/D encoding result=40
08:23:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:42 Set channel filter=0.000000e+000  result=40
08:23:42 Config A/D  Result=40
08:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:42 Get A/D filter: -9.255963e+061  result=40
08:23:42 Get A/D value=-858993460  result=40
08:23:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:23:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:23:42 Aux=
08:23:42 Message to Camera, serial 350013 queued
[UTC 2019-3-19  08:23:48]
08:24:19 Received message from Master: op=PointingHead serial=350026
08:24:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:24:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:24:19 Point started: ret=0
08:24:19 point_skyscan result=0
08:24:20 Check angles
08:24:20 SkyScan query
08:24:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:24:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:24:21 Message to Master queued w/err=0: serial=350026 error=0
08:24:26 Received message from Master: op=Filter serial=350027
08:24:26 Color wheel filter change from 0 to 0
08:24:26 FLIGetFilterPos err=0  currentPosition=0
08:24:26 FLIGetStepsRemaining err=0  RemainingSteps=0
08:24:26 Filter is already there-color wheel unchanged
08:24:26 Received message from Master: op=Shutter serial=350028
08:24:26 Shutter LASER close
08:24:26 Received message from Camera: op=State serial=350030
08:24:26 GetSingleValue result=40  Value=cccccccc
08:24:26 SkyScan query
08:24:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:24:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:24:26 Parameters OK
08:24:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:24:26 Set A/D data flow result=40
08:24:26 Set A/D channel type result=40
08:24:26 Set A/D encoding result=40
08:24:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:24:26 Set channel filter=0.000000e+000  result=40
08:24:26 Config A/D  Result=40
08:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:24:26 Get A/D filter: -9.255963e+061  result=40
08:24:26 Get A/D value=-858993460  result=40
08:24:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:24:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:24:26 Parameters OK
08:24:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:24:26 Set A/D data flow result=40
08:24:26 Set A/D channel type result=40
08:24:26 Set A/D encoding result=40
08:24:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:24:26 Set channel filter=0.000000e+000  result=40
08:24:26 Config A/D  Result=40
08:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:24:26 Get A/D filter: -9.255963e+061  result=40
08:24:26 Get A/D value=-858993460  result=40
08:24:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:24:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:24:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:24:26 Aux=
08:24:26 Message to Camera, serial 350030 queued
08:25:03 Received message from Master: op=PointingHead serial=350043
08:25:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:25:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:25:04 Point started: ret=0
08:25:04 point_skyscan result=0
08:25:04 Check angles
08:25:04 SkyScan query
08:25:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:25:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:25:05 Message to Master queued w/err=0: serial=350043 error=0
08:25:10 Received message from Master: op=Filter serial=350044
08:25:10 Color wheel filter change from 0 to 0
08:25:10 FLIGetFilterPos err=0  currentPosition=0
08:25:10 FLIGetStepsRemaining err=0  RemainingSteps=0
08:25:10 Filter is already there-color wheel unchanged
08:25:10 Received message from Master: op=Shutter serial=350045
08:25:10 Shutter LASER close
08:25:10 Received message from Camera: op=State serial=350047
08:25:10 GetSingleValue result=40  Value=cccccccc
08:25:10 SkyScan query
08:25:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:25:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:25:11 Parameters OK
08:25:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:25:11 Set A/D data flow result=40
08:25:11 Set A/D channel type result=40
08:25:11 Set A/D encoding result=40
08:25:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:25:11 Set channel filter=0.000000e+000  result=40
08:25:11 Config A/D  Result=40
08:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:25:11 Get A/D filter: -9.255963e+061  result=40
08:25:11 Get A/D value=-858993460  result=40
08:25:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:25:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:25:11 Parameters OK
08:25:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:25:11 Set A/D data flow result=40
08:25:11 Set A/D channel type result=40
08:25:11 Set A/D encoding result=40
08:25:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:25:11 Set channel filter=0.000000e+000  result=40
08:25:11 Config A/D  Result=40
08:25:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:25:11 Get A/D filter: -9.255963e+061  result=40
08:25:11 Get A/D value=-858993460  result=40
08:25:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:25:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:25:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:25:11 Aux=
08:25:11 Message to Camera, serial 350047 queued
08:25:48 Received message from Master: op=PointingHead serial=350060
08:25:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:25:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:25:48 Point started: ret=0
08:25:48 point_skyscan result=0
08:25:49 Check angles
08:25:49 SkyScan query
08:25:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:25:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:25:49 Message to Master queued w/err=0: serial=350060 error=0
08:25:54 Received message from Master: op=Filter serial=350061
08:25:54 Color wheel filter change from 0 to 0
08:25:54 FLIGetFilterPos err=0  currentPosition=0
08:25:54 FLIGetStepsRemaining err=0  RemainingSteps=0
08:25:54 Filter is already there-color wheel unchanged
08:25:54 Received message from Master: op=Shutter serial=350062
08:25:54 Shutter LASER close
08:25:54 Received message from Camera: op=State serial=350064
08:25:54 GetSingleValue result=40  Value=cccccccc
08:25:54 SkyScan query
08:25:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:25:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:25:55 Parameters OK
08:25:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:25:55 Set A/D data flow result=40
08:25:55 Set A/D channel type result=40
08:25:55 Set A/D encoding result=40
08:25:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:25:55 Set channel filter=0.000000e+000  result=40
08:25:55 Config A/D  Result=40
08:25:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:25:55 Get A/D filter: -9.255963e+061  result=40
08:25:55 Get A/D value=-858993460  result=40
08:25:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:25:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:25:55 Parameters OK
08:25:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:25:55 Set A/D data flow result=40
08:25:55 Set A/D channel type result=40
08:25:55 Set A/D encoding result=40
08:25:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:25:55 Set channel filter=0.000000e+000  result=40
08:25:55 Config A/D  Result=40
08:25:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:25:55 Get A/D filter: -9.255963e+061  result=40
08:25:55 Get A/D value=-858993460  result=40
08:25:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:25:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:25:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:25:55 Aux=
08:25:55 Message to Camera, serial 350064 queued
08:26:31 Received message from Master: op=PointingHead serial=350076
08:26:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:26:31 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:26:31 Point started: ret=0
08:26:31 point_skyscan result=0
08:26:32 Check angles
08:26:32 SkyScan query
08:26:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
08:26:33 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
08:26:33 Check angles
08:26:33 SkyScan query
08:26:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.055<-14937  Statuses=0008 0009
08:26:33 Msec=750  True Az=112.995  Ze=-44.055  Az status=0008  Ze status=0009
08:26:34 Check angles
08:26:34 SkyScan query
08:26:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.025<-16335  Statuses=0008 0009
08:26:34 Msec=1500  True Az=112.995  Ze=-65.025  Az status=0008  Ze status=0009
08:26:34 Check angles
08:26:34 SkyScan query
08:26:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.98<-17732  Statuses=0008 0009
08:26:35 Msec=2250  True Az=112.995  Ze=-85.98  Az status=0008  Ze status=0009
08:26:35 Check angles
08:26:35 SkyScan query
08:26:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.92<-19128  Statuses=0008 0009
08:26:36 Msec=3000  True Az=112.995  Ze=-106.92  Az status=0008  Ze status=0009
08:26:36 Check angles
08:26:36 SkyScan query
08:26:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.89<-20526  Statuses=0008 0009
08:26:36 Msec=3750  True Az=112.995  Ze=-127.89  Az status=0008  Ze status=0009
08:26:37 Check angles
08:26:37 SkyScan query
08:26:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.83<-21922  Statuses=0008 0009
08:26:37 Msec=4500  True Az=112.995  Ze=-148.83  Az status=0008  Ze status=0009
08:26:37 Check angles
08:26:37 SkyScan query
08:26:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.77<-23318  Statuses=0008 0009
08:26:38 Msec=5250  True Az=112.995  Ze=-169.77  Az status=0008  Ze status=0009
08:26:38 Check angles
08:26:38 SkyScan query
08:26:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:26:39 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:26:39 Message to Master queued w/err=0: serial=350076 error=0
08:26:44 Received message from Master: op=Filter serial=350077
08:26:44 Color wheel filter change from 0 to 0
08:26:44 FLIGetFilterPos err=0  currentPosition=0
08:26:44 FLIGetStepsRemaining err=0  RemainingSteps=0
08:26:44 Filter is already there-color wheel unchanged
08:26:44 Received message from Master: op=Shutter serial=350078
08:26:44 Shutter LASER open
08:26:44 Received message from Camera: op=State serial=350080
08:26:44 GetSingleValue result=40  Value=cccccccc
08:26:44 SkyScan query
08:26:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:26:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:26:45 Parameters OK
08:26:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:26:45 Set A/D data flow result=40
08:26:45 Set A/D channel type result=40
08:26:45 Set A/D encoding result=40
08:26:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:26:45 Set channel filter=0.000000e+000  result=40
08:26:45 Config A/D  Result=40
08:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:26:45 Get A/D filter: -9.255963e+061  result=40
08:26:45 Get A/D value=-858993460  result=40
08:26:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:26:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:26:45 Parameters OK
08:26:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:26:45 Set A/D data flow result=40
08:26:45 Set A/D channel type result=40
08:26:45 Set A/D encoding result=40
08:26:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:26:45 Set channel filter=0.000000e+000  result=40
08:26:45 Config A/D  Result=40
08:26:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:26:45 Get A/D filter: -9.255963e+061  result=40
08:26:45 Get A/D value=-858993460  result=40
08:26:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:26:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:26:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:26:45 Aux=
08:26:45 Message to Camera, serial 350080 queued
08:26:53 Received message from Master: op=Shutter serial=350090
08:26:53 Shutter LASER close
08:26:54 Received message from Master: op=PointingHead serial=350094
08:26:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:26:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:26:54 Point started: ret=0
08:26:54 point_skyscan result=0
08:26:55 Check angles
08:26:55 SkyScan query
08:26:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.25<-21550  Statuses=0008 0009
08:26:55 Msec=0  True Az=112.995  Ze=-143.25  Az status=0008  Ze status=0009
08:26:55 Check angles
08:26:55 SkyScan query
08:26:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.295<-20153  Statuses=0008 0009
08:26:56 Msec=750  True Az=112.995  Ze=-122.295  Az status=0008  Ze status=0009
08:26:56 Check angles
08:26:56 SkyScan query
08:26:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
08:26:57 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
08:26:57 Check angles
08:26:57 SkyScan query
08:26:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.965<-17331  Statuses=0008 0009
08:26:58 Msec=2250  True Az=112.995  Ze=-79.965  Az status=0008  Ze status=0009
08:26:58 Check angles
08:26:58 SkyScan query
08:26:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.01<-15934  Statuses=0008 0009
08:26:58 Msec=3000  True Az=112.995  Ze=-59.01  Az status=0008  Ze status=0009
08:26:59 Check angles
08:26:59 SkyScan query
08:26:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
08:26:59 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
08:26:59 Check angles
08:26:59 SkyScan query
08:27:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.635<-13109  Statuses=0008 0009
08:27:00 Msec=4500  True Az=112.995  Ze=-16.635  Az status=0008  Ze status=0009
08:27:00 Check angles
08:27:00 SkyScan query
08:27:01 SkyScan query done: ret=0  az=112.995<-7533  ze=4.26<-11716  Statuses=0008 0009
08:27:01 Msec=5250  True Az=112.995  Ze=4.26  Az status=0008  Ze status=0009
08:27:01 Check angles
08:27:01 SkyScan query
08:27:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:27:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:27:01 Message to Master queued w/err=0: serial=350094 error=0
08:27:06 Received message from Master: op=Filter serial=350095
08:27:06 Color wheel filter change from 0 to 0
08:27:06 FLIGetFilterPos err=0  currentPosition=0
08:27:06 FLIGetStepsRemaining err=0  RemainingSteps=0
08:27:06 Filter is already there-color wheel unchanged
08:27:07 Received message from Master: op=Shutter serial=350096
08:27:07 Shutter LASER close
08:27:07 Received message from Camera: op=State serial=350098
08:27:07 GetSingleValue result=40  Value=cccccccc
08:27:07 SkyScan query
08:27:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:27:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:27:07 Parameters OK
08:27:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:27:07 Set A/D data flow result=40
08:27:07 Set A/D channel type result=40
08:27:07 Set A/D encoding result=40
08:27:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:27:07 Set channel filter=0.000000e+000  result=40
08:27:07 Config A/D  Result=40
08:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:27:07 Get A/D filter: -9.255963e+061  result=40
08:27:07 Get A/D value=-858993460  result=40
08:27:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:27:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:27:07 Parameters OK
08:27:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:27:07 Set A/D data flow result=40
08:27:07 Set A/D channel type result=40
08:27:07 Set A/D encoding result=40
08:27:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:27:07 Set channel filter=0.000000e+000  result=40
08:27:07 Config A/D  Result=40
08:27:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:27:07 Get A/D filter: -9.255963e+061  result=40
08:27:07 Get A/D value=-858993460  result=40
08:27:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:27:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:27:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:27:07 Aux=
08:27:07 Message to Camera, serial 350098 queued
08:27:44 Received message from Master: op=PointingHead serial=350111
08:27:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:27:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:27:44 Point started: ret=0
08:27:44 point_skyscan result=0
08:27:45 Check angles
08:27:45 SkyScan query
08:27:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:27:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:27:46 Message to Master queued w/err=0: serial=350111 error=0
08:27:51 Received message from Master: op=Filter serial=350112
08:27:51 Color wheel filter change from 0 to 0
08:27:51 FLIGetFilterPos err=0  currentPosition=0
08:27:51 FLIGetStepsRemaining err=0  RemainingSteps=0
08:27:51 Filter is already there-color wheel unchanged
08:27:51 Received message from Master: op=Shutter serial=350113
08:27:51 Shutter LASER close
08:27:51 Received message from Camera: op=State serial=350115
08:27:51 GetSingleValue result=40  Value=cccccccc
08:27:51 SkyScan query
08:27:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:27:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:27:52 Parameters OK
08:27:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:27:52 Set A/D data flow result=40
08:27:52 Set A/D channel type result=40
08:27:52 Set A/D encoding result=40
08:27:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:27:52 Set channel filter=0.000000e+000  result=40
08:27:52 Config A/D  Result=40
08:27:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:27:52 Get A/D filter: -9.255963e+061  result=40
08:27:52 Get A/D value=-858993460  result=40
08:27:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:27:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:27:52 Parameters OK
08:27:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:27:52 Set A/D data flow result=40
08:27:52 Set A/D channel type result=40
08:27:52 Set A/D encoding result=40
08:27:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:27:52 Set channel filter=0.000000e+000  result=40
08:27:52 Config A/D  Result=40
08:27:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:27:52 Get A/D filter: -9.255963e+061  result=40
08:27:52 Get A/D value=-858993460  result=40
08:27:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:27:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:27:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:27:52 Aux=
08:27:52 Message to Camera, serial 350115 queued
08:28:28 Received message from Master: op=PointingHead serial=350128
08:28:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:28:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:28:29 Point started: ret=0
08:28:29 point_skyscan result=0
08:28:30 Check angles
08:28:30 SkyScan query
08:28:30 SkyScan query done: ret=0  az=136.305<-9087  ze=-6.51<-12434  Statuses=0009 0008
08:28:30 Msec=0  True Az=136.305  Ze=-6.51  Az status=0009  Ze status=0008
08:28:30 Check angles
08:28:30 SkyScan query
08:28:31 SkyScan query done: ret=0  az=153.855<-10257  ze=-6.495<-12433  Statuses=0009 0008
08:28:31 Msec=750  True Az=153.855  Ze=-6.495  Az status=0009  Ze status=0008
08:28:31 Check angles
08:28:31 SkyScan query
08:28:32 SkyScan query done: ret=0  az=171.225<-11415  ze=-6.495<-12433  Statuses=0009 0008
08:28:32 Msec=1500  True Az=171.225  Ze=-6.495  Az status=0009  Ze status=0008
08:28:32 Check angles
08:28:32 SkyScan query
08:28:32 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:28:32 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:28:32 Message to Master queued w/err=0: serial=350128 error=0
08:28:37 Received message from Master: op=Filter serial=350129
08:28:37 Color wheel filter change from 0 to 0
08:28:37 FLIGetFilterPos err=0  currentPosition=0
08:28:37 FLIGetStepsRemaining err=0  RemainingSteps=0
08:28:37 Filter is already there-color wheel unchanged
08:28:38 Received message from Master: op=Shutter serial=350130
08:28:38 Shutter LASER close
08:28:38 Received message from Camera: op=State serial=350132
08:28:38 GetSingleValue result=40  Value=cccccccc
08:28:38 SkyScan query
08:28:38 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:28:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:28:38 Parameters OK
08:28:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:28:38 Set A/D data flow result=40
08:28:38 Set A/D channel type result=40
08:28:38 Set A/D encoding result=40
08:28:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:28:38 Set channel filter=0.000000e+000  result=40
08:28:38 Config A/D  Result=40
08:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:28:38 Get A/D filter: -9.255963e+061  result=40
08:28:38 Get A/D value=-858993460  result=40
08:28:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:28:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:28:38 Parameters OK
08:28:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:28:38 Set A/D data flow result=40
08:28:38 Set A/D channel type result=40
08:28:38 Set A/D encoding result=40
08:28:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:28:38 Set channel filter=0.000000e+000  result=40
08:28:38 Config A/D  Result=40
08:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:28:38 Get A/D filter: -9.255963e+061  result=40
08:28:38 Get A/D value=-858993460  result=40
08:28:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:28:38 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:28:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:28:38 Aux=
08:28:38 Message to Camera, serial 350132 queued
08:29:15 Received message from Master: op=PointingHead serial=350145
08:29:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:29:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:29:15 Point started: ret=0
08:29:15 point_skyscan result=0
08:29:16 Check angles
08:29:16 SkyScan query
08:29:17 SkyScan query done: ret=0  az=153.255<-10217  ze=6.51<-11566  Statuses=0009 0008
08:29:17 Msec=0  True Az=153.255  Ze=6.51  Az status=0009  Ze status=0008
08:29:17 Check angles
08:29:17 SkyScan query
08:29:17 SkyScan query done: ret=0  az=135.78<-9052  ze=6.495<-11567  Statuses=0009 0008
08:29:17 Msec=750  True Az=135.78  Ze=6.495  Az status=0009  Ze status=0008
08:29:18 Check angles
08:29:18 SkyScan query
08:29:18 SkyScan query done: ret=0  az=118.32<-7888  ze=6.495<-11567  Statuses=0009 0008
08:29:18 Msec=1500  True Az=118.32  Ze=6.495  Az status=0009  Ze status=0008
08:29:18 Check angles
08:29:18 SkyScan query
08:29:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:29:19 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:29:19 Message to Master queued w/err=0: serial=350145 error=0
08:29:24 Received message from Master: op=Filter serial=350146
08:29:24 Color wheel filter change from 0 to 0
08:29:24 FLIGetFilterPos err=0  currentPosition=0
08:29:24 FLIGetStepsRemaining err=0  RemainingSteps=0
08:29:24 Filter is already there-color wheel unchanged
08:29:24 Received message from Master: op=Shutter serial=350147
08:29:24 Shutter LASER close
08:29:24 Received message from Camera: op=State serial=350149
08:29:24 GetSingleValue result=40  Value=cccccccc
08:29:24 SkyScan query
08:29:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:29:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:29:25 Parameters OK
08:29:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:29:25 Set A/D data flow result=40
08:29:25 Set A/D channel type result=40
08:29:25 Set A/D encoding result=40
08:29:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:29:25 Set channel filter=0.000000e+000  result=40
08:29:25 Config A/D  Result=40
08:29:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:29:25 Get A/D filter: -9.255963e+061  result=40
08:29:25 Get A/D value=-858993460  result=40
08:29:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:29:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:29:25 Parameters OK
08:29:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:29:25 Set A/D data flow result=40
08:29:25 Set A/D channel type result=40
08:29:25 Set A/D encoding result=40
08:29:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:29:25 Set channel filter=0.000000e+000  result=40
08:29:25 Config A/D  Result=40
08:29:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:29:25 Get A/D filter: -9.255963e+061  result=40
08:29:25 Get A/D value=-858993460  result=40
08:29:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:29:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:29:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:29:25 Aux=
08:29:25 Message to Camera, serial 350149 queued
08:30:01 Received message from Master: op=PointingHead serial=350162
08:30:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:30:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:30:02 Point started: ret=0
08:30:02 point_skyscan result=0
08:30:03 Check angles
08:30:03 SkyScan query
08:30:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
08:30:03 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
08:30:03 Check angles
08:30:03 SkyScan query
08:30:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.85<-14990  Statuses=0008 0009
08:30:04 Msec=750  True Az=112.995  Ze=-44.85  Az status=0008  Ze status=0009
08:30:04 Check angles
08:30:04 SkyScan query
08:30:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.79<-16386  Statuses=0008 0009
08:30:05 Msec=1500  True Az=112.995  Ze=-65.79  Az status=0008  Ze status=0009
08:30:05 Check angles
08:30:05 SkyScan query
08:30:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.745<-17783  Statuses=0008 0009
08:30:05 Msec=2250  True Az=112.995  Ze=-86.745  Az status=0008  Ze status=0009
08:30:06 Check angles
08:30:06 SkyScan query
08:30:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.135<-19209  Statuses=0008 0009
08:30:06 Msec=3000  True Az=112.995  Ze=-108.135  Az status=0008  Ze status=0009
08:30:06 Check angles
08:30:06 SkyScan query
08:30:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.525<-20635  Statuses=0008 0009
08:30:07 Msec=3750  True Az=112.995  Ze=-129.525  Az status=0008  Ze status=0009
08:30:07 Check angles
08:30:07 SkyScan query
08:30:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.48<-22032  Statuses=0008 0009
08:30:08 Msec=4500  True Az=112.995  Ze=-150.48  Az status=0008  Ze status=0009
08:30:08 Check angles
08:30:08 SkyScan query
08:30:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.24<-23416  Statuses=0008 0009
08:30:08 Msec=5250  True Az=112.995  Ze=-171.24  Az status=0008  Ze status=0009
08:30:09 Check angles
08:30:09 SkyScan query
08:30:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:30:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:30:09 Message to Master queued w/err=0: serial=350162 error=0
08:30:14 Received message from Master: op=Filter serial=350163
08:30:14 Color wheel filter change from 0 to 0
08:30:14 FLIGetFilterPos err=0  currentPosition=0
08:30:14 FLIGetStepsRemaining err=0  RemainingSteps=0
08:30:14 Filter is already there-color wheel unchanged
08:30:14 Received message from Master: op=Shutter serial=350164
08:30:14 Shutter LASER open
08:30:15 Received message from Camera: op=State serial=350166
08:30:15 GetSingleValue result=40  Value=cccccccc
08:30:15 SkyScan query
08:30:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:30:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:15 Parameters OK
08:30:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:15 Set A/D data flow result=40
08:30:15 Set A/D channel type result=40
08:30:15 Set A/D encoding result=40
08:30:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:15 Set channel filter=0.000000e+000  result=40
08:30:15 Config A/D  Result=40
08:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:15 Get A/D filter: -9.255963e+061  result=40
08:30:15 Get A/D value=-858993460  result=40
08:30:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:15 Parameters OK
08:30:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:15 Set A/D data flow result=40
08:30:15 Set A/D channel type result=40
08:30:15 Set A/D encoding result=40
08:30:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:15 Set channel filter=0.000000e+000  result=40
08:30:15 Config A/D  Result=40
08:30:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:15 Get A/D filter: -9.255963e+061  result=40
08:30:15 Get A/D value=-858993460  result=40
08:30:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:30:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:30:15 Aux=
08:30:15 Message to Camera, serial 350166 queued
08:30:24 Received message from Master: op=Shutter serial=350176
08:30:24 Shutter LASER close
08:30:24 Received message from Master: op=PointingHead serial=350180
08:30:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:30:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:30:24 Point started: ret=0
08:30:24 point_skyscan result=0
08:30:25 Check angles
08:30:25 SkyScan query
08:30:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.25<-21550  Statuses=0008 0009
08:30:26 Msec=0  True Az=112.995  Ze=-143.25  Az status=0008  Ze status=0009
08:30:26 Check angles
08:30:26 SkyScan query
08:30:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.295<-20153  Statuses=0008 0009
08:30:26 Msec=750  True Az=112.995  Ze=-122.295  Az status=0008  Ze status=0009
08:30:27 Check angles
08:30:27 SkyScan query
08:30:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.355<-18757  Statuses=0008 0009
08:30:27 Msec=1500  True Az=112.995  Ze=-101.355  Az status=0008  Ze status=0009
08:30:27 Check angles
08:30:27 SkyScan query
08:30:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.385<-17359  Statuses=0008 0009
08:30:28 Msec=2250  True Az=112.995  Ze=-80.385  Az status=0008  Ze status=0009
08:30:28 Check angles
08:30:28 SkyScan query
08:30:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.43<-15962  Statuses=0008 0009
08:30:29 Msec=3000  True Az=112.995  Ze=-59.43  Az status=0008  Ze status=0009
08:30:29 Check angles
08:30:29 SkyScan query
08:30:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.46<-14564  Statuses=0008 0009
08:30:29 Msec=3750  True Az=112.995  Ze=-38.46  Az status=0008  Ze status=0009
08:30:30 Check angles
08:30:30 SkyScan query
08:30:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.52<-13168  Statuses=0008 0009
08:30:30 Msec=4500  True Az=112.995  Ze=-17.52  Az status=0008  Ze status=0009
08:30:30 Check angles
08:30:30 SkyScan query
08:30:31 SkyScan query done: ret=0  az=112.995<-7533  ze=3.45<-11770  Statuses=0008 0009
08:30:31 Msec=5250  True Az=112.995  Ze=3.45  Az status=0008  Ze status=0009
08:30:31 Check angles
08:30:31 SkyScan query
08:30:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:30:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:30:32 Message to Master queued w/err=0: serial=350180 error=0
08:30:37 Received message from Master: op=Filter serial=350181
08:30:37 Color wheel filter change from 0 to 0
08:30:37 FLIGetFilterPos err=0  currentPosition=0
08:30:37 FLIGetStepsRemaining err=0  RemainingSteps=0
08:30:37 Filter is already there-color wheel unchanged
08:30:37 Received message from Master: op=Shutter serial=350182
08:30:37 Shutter LASER close
08:30:37 Received message from Camera: op=State serial=350184
08:30:37 GetSingleValue result=40  Value=cccccccc
08:30:37 SkyScan query
08:30:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:38 Parameters OK
08:30:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:38 Set A/D data flow result=40
08:30:38 Set A/D channel type result=40
08:30:38 Set A/D encoding result=40
08:30:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:38 Set channel filter=0.000000e+000  result=40
08:30:38 Config A/D  Result=40
08:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:38 Get A/D filter: -9.255963e+061  result=40
08:30:38 Get A/D value=-858993460  result=40
08:30:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:38 Parameters OK
08:30:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:38 Set A/D data flow result=40
08:30:38 Set A/D channel type result=40
08:30:38 Set A/D encoding result=40
08:30:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:38 Set channel filter=0.000000e+000  result=40
08:30:38 Config A/D  Result=40
08:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:38 Get A/D filter: -9.255963e+061  result=40
08:30:38 Get A/D value=-858993460  result=40
08:30:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:30:38 Aux=
08:30:38 Message to Camera, serial 350184 queued
08:31:14 Received message from Master: op=PointingHead serial=350197
08:31:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:31:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:31:15 Point started: ret=0
08:31:15 point_skyscan result=0
08:31:16 Check angles
08:31:16 SkyScan query
08:31:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:31:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:31:16 Message to Master queued w/err=0: serial=350197 error=0
08:31:21 Received message from Master: op=Filter serial=350198
08:31:21 Color wheel filter change from 0 to 0
08:31:21 FLIGetFilterPos err=0  currentPosition=0
08:31:21 FLIGetStepsRemaining err=0  RemainingSteps=0
08:31:21 Filter is already there-color wheel unchanged
08:31:21 Received message from Master: op=Shutter serial=350199
08:31:21 Shutter LASER close
08:31:21 Received message from Camera: op=State serial=350201
08:31:21 GetSingleValue result=40  Value=cccccccc
08:31:21 SkyScan query
08:31:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:31:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:31:22 Parameters OK
08:31:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:31:22 Set A/D data flow result=40
08:31:22 Set A/D channel type result=40
08:31:22 Set A/D encoding result=40
08:31:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:31:22 Set channel filter=0.000000e+000  result=40
08:31:22 Config A/D  Result=40
08:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:31:22 Get A/D filter: -9.255963e+061  result=40
08:31:22 Get A/D value=-858993460  result=40
08:31:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:31:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:31:22 Parameters OK
08:31:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:31:22 Set A/D data flow result=40
08:31:22 Set A/D channel type result=40
08:31:22 Set A/D encoding result=40
08:31:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:31:22 Set channel filter=0.000000e+000  result=40
08:31:22 Config A/D  Result=40
08:31:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:31:22 Get A/D filter: -9.255963e+061  result=40
08:31:22 Get A/D value=-858993460  result=40
08:31:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:31:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:31:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:31:22 Aux=
08:31:22 Message to Camera, serial 350201 queued
08:31:59 Received message from Master: op=PointingHead serial=350214
08:31:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:31:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:31:59 Point started: ret=0
08:31:59 point_skyscan result=0
08:32:00 Check angles
08:32:00 SkyScan query
08:32:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:32:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:32:00 Message to Master queued w/err=0: serial=350214 error=0
08:32:05 Received message from Master: op=Filter serial=350215
08:32:05 Color wheel filter change from 0 to 0
08:32:05 FLIGetFilterPos err=0  currentPosition=0
08:32:05 FLIGetStepsRemaining err=0  RemainingSteps=0
08:32:05 Filter is already there-color wheel unchanged
08:32:06 Received message from Master: op=Shutter serial=350216
08:32:06 Shutter LASER close
08:32:06 Received message from Camera: op=State serial=350218
08:32:06 GetSingleValue result=40  Value=cccccccc
08:32:06 SkyScan query
08:32:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:32:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:32:06 Parameters OK
08:32:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:32:06 Set A/D data flow result=40
08:32:06 Set A/D channel type result=40
08:32:06 Set A/D encoding result=40
08:32:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:32:06 Set channel filter=0.000000e+000  result=40
08:32:06 Config A/D  Result=40
08:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:32:06 Get A/D filter: -9.255963e+061  result=40
08:32:06 Get A/D value=-858993460  result=40
08:32:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:32:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:32:06 Parameters OK
08:32:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:32:06 Set A/D data flow result=40
08:32:06 Set A/D channel type result=40
08:32:06 Set A/D encoding result=40
08:32:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:32:06 Set channel filter=0.000000e+000  result=40
08:32:06 Config A/D  Result=40
08:32:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:32:06 Get A/D filter: -9.255963e+061  result=40
08:32:06 Get A/D value=-858993460  result=40
08:32:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:32:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:32:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:32:06 Aux=
08:32:06 Message to Camera, serial 350218 queued
08:32:43 Received message from Master: op=PointingHead serial=350231
08:32:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:32:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:32:43 Point started: ret=0
08:32:43 point_skyscan result=0
08:32:44 Check angles
08:32:44 SkyScan query
08:32:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
08:32:45 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
08:32:45 Message to Master queued w/err=0: serial=350231 error=0
08:32:50 Received message from Master: op=Filter serial=350232
08:32:50 Color wheel filter change from 0 to 0
08:32:50 FLIGetFilterPos err=0  currentPosition=0
08:32:50 FLIGetStepsRemaining err=0  RemainingSteps=0
08:32:50 Filter is already there-color wheel unchanged
08:32:50 Received message from Master: op=Shutter serial=350233
08:32:50 Shutter LASER close
08:32:50 Received message from Camera: op=State serial=350235
08:32:50 GetSingleValue result=40  Value=cccccccc
08:32:50 SkyScan query
08:32:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:32:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:32:51 Parameters OK
08:32:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:32:51 Set A/D data flow result=40
08:32:51 Set A/D channel type result=40
08:32:51 Set A/D encoding result=40
08:32:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:32:51 Set channel filter=0.000000e+000  result=40
08:32:51 Config A/D  Result=40
08:32:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:32:51 Get A/D filter: -9.255963e+061  result=40
08:32:51 Get A/D value=-858993460  result=40
08:32:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:32:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:32:51 Parameters OK
08:32:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:32:51 Set A/D data flow result=40
08:32:51 Set A/D channel type result=40
08:32:51 Set A/D encoding result=40
08:32:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:32:51 Set channel filter=0.000000e+000  result=40
08:32:51 Config A/D  Result=40
08:32:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:32:51 Get A/D filter: -9.255963e+061  result=40
08:32:51 Get A/D value=-858993460  result=40
08:32:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:32:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:32:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:32:51 Aux=
08:32:51 Message to Camera, serial 350235 queued
08:33:27 Received message from Master: op=PointingHead serial=350248
08:33:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:33:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:33:28 Point started: ret=0
08:33:28 point_skyscan result=0
08:33:28 Check angles
08:33:28 SkyScan query
08:33:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
08:33:29 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
08:33:29 Check angles
08:33:29 SkyScan query
08:33:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.04<-14936  Statuses=0008 0009
08:33:30 Msec=750  True Az=112.995  Ze=-44.04  Az status=0008  Ze status=0009
08:33:30 Check angles
08:33:30 SkyScan query
08:33:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.995<-16333  Statuses=0008 0009
08:33:31 Msec=1500  True Az=112.995  Ze=-64.995  Az status=0008  Ze status=0009
08:33:31 Check angles
08:33:31 SkyScan query
08:33:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.37<-17758  Statuses=0008 0009
08:33:31 Msec=2250  True Az=112.995  Ze=-86.37  Az status=0008  Ze status=0009
08:33:32 Check angles
08:33:32 SkyScan query
08:33:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.325<-19155  Statuses=0008 0009
08:33:32 Msec=3000  True Az=112.995  Ze=-107.325  Az status=0008  Ze status=0009
08:33:32 Check angles
08:33:32 SkyScan query
08:33:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
08:33:33 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
08:33:33 Check angles
08:33:33 SkyScan query
08:33:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.655<-21977  Statuses=0008 0009
08:33:34 Msec=4500  True Az=112.995  Ze=-149.655  Az status=0008  Ze status=0009
08:33:34 Check angles
08:33:34 SkyScan query
08:33:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.565<-23371  Statuses=0008 0009
08:33:34 Msec=5250  True Az=112.995  Ze=-170.565  Az status=0008  Ze status=0009
08:33:35 Check angles
08:33:35 SkyScan query
08:33:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:33:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:33:35 Message to Master queued w/err=0: serial=350248 error=0
08:33:35 Received message from Master: op=Identify serial=350249
08:33:40 Received message from Master: op=Filter serial=350252
08:33:40 Color wheel filter change from 0 to 0
08:33:40 FLIGetFilterPos err=0  currentPosition=0
08:33:40 FLIGetStepsRemaining err=0  RemainingSteps=0
08:33:40 Filter is already there-color wheel unchanged
08:33:40 Received message from Master: op=Shutter serial=350253
08:33:40 Shutter LASER open
08:33:40 Received message from Camera: op=State serial=350255
08:33:40 GetSingleValue result=40  Value=cccccccc
08:33:40 SkyScan query
08:33:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:33:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:33:41 Parameters OK
08:33:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:33:41 Set A/D data flow result=40
08:33:41 Set A/D channel type result=40
08:33:41 Set A/D encoding result=40
08:33:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:33:41 Set channel filter=0.000000e+000  result=40
08:33:41 Config A/D  Result=40
08:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:33:41 Get A/D filter: -9.255963e+061  result=40
08:33:41 Get A/D value=-858993460  result=40
08:33:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:33:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:33:41 Parameters OK
08:33:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:33:41 Set A/D data flow result=40
08:33:41 Set A/D channel type result=40
08:33:41 Set A/D encoding result=40
08:33:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:33:41 Set channel filter=0.000000e+000  result=40
08:33:41 Config A/D  Result=40
08:33:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:33:41 Get A/D filter: -9.255963e+061  result=40
08:33:41 Get A/D value=-858993460  result=40
08:33:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:33:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:33:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:33:41 Aux=
08:33:41 Message to Camera, serial 350255 queued
08:33:49 Received message from Master: op=Shutter serial=350265
08:33:49 Shutter LASER close
08:33:50 Received message from Master: op=PointingHead serial=350269
08:33:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:33:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:33:50 Point started: ret=0
08:33:50 point_skyscan result=0
08:33:51 Check angles
08:33:51 SkyScan query
08:33:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
08:33:52 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
08:33:52 Check angles
08:33:52 SkyScan query
08:33:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
08:33:52 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
08:33:53 Check angles
08:33:53 SkyScan query
08:33:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
08:33:53 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
08:33:53 Check angles
08:33:53 SkyScan query
08:33:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.325<-17355  Statuses=0008 0009
08:33:54 Msec=2250  True Az=112.995  Ze=-80.325  Az status=0008  Ze status=0009
08:33:54 Check angles
08:33:54 SkyScan query
08:33:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.385<-15959  Statuses=0008 0009
08:33:55 Msec=3000  True Az=112.995  Ze=-59.385  Az status=0008  Ze status=0009
08:33:55 Check angles
08:33:55 SkyScan query
08:33:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.415<-14561  Statuses=0008 0009
08:33:55 Msec=3750  True Az=112.995  Ze=-38.415  Az status=0008  Ze status=0009
08:33:56 Check angles
08:33:56 SkyScan query
08:33:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.475<-13165  Statuses=0008 0009
08:33:56 Msec=4500  True Az=112.995  Ze=-17.475  Az status=0008  Ze status=0009
08:33:56 Check angles
08:33:56 SkyScan query
08:33:57 SkyScan query done: ret=0  az=112.995<-7533  ze=3.915<-11739  Statuses=0008 0009
08:33:57 Msec=5250  True Az=112.995  Ze=3.915  Az status=0008  Ze status=0009
08:33:57 Check angles
08:33:57 SkyScan query
08:33:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:33:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:33:58 Message to Master queued w/err=0: serial=350269 error=0
08:34:03 Received message from Master: op=Filter serial=350270
08:34:03 Color wheel filter change from 0 to 0
08:34:03 FLIGetFilterPos err=0  currentPosition=0
08:34:03 FLIGetStepsRemaining err=0  RemainingSteps=0
08:34:03 Filter is already there-color wheel unchanged
08:34:03 Received message from Master: op=Shutter serial=350271
08:34:03 Shutter LASER close
08:34:03 Received message from Camera: op=State serial=350273
08:34:03 GetSingleValue result=40  Value=cccccccc
08:34:03 SkyScan query
08:34:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:34:04 Parameters OK
08:34:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:34:04 Set A/D data flow result=40
08:34:04 Set A/D channel type result=40
08:34:04 Set A/D encoding result=40
08:34:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:34:04 Set channel filter=0.000000e+000  result=40
08:34:04 Config A/D  Result=40
08:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:34:04 Get A/D filter: -9.255963e+061  result=40
08:34:04 Get A/D value=-858993460  result=40
08:34:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:34:04 Parameters OK
08:34:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:34:04 Set A/D data flow result=40
08:34:04 Set A/D channel type result=40
08:34:04 Set A/D encoding result=40
08:34:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:34:04 Set channel filter=0.000000e+000  result=40
08:34:04 Config A/D  Result=40
08:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:34:04 Get A/D filter: -9.255963e+061  result=40
08:34:04 Get A/D value=-858993460  result=40
08:34:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:34:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:34:04 Aux=
08:34:04 Message to Camera, serial 350273 queued
08:34:41 Received message from Master: op=PointingHead serial=350286
08:34:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:34:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:34:41 Point started: ret=0
08:34:41 point_skyscan result=0
08:34:42 Check angles
08:34:42 SkyScan query
08:34:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:34:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:34:42 Message to Master queued w/err=0: serial=350286 error=0
08:34:47 Received message from Master: op=Filter serial=350287
[UTC 2019-3-19  08:34:47]
08:34:47 Color wheel filter change from 0 to 0
08:34:47 FLIGetFilterPos err=0  currentPosition=0
08:34:47 FLIGetStepsRemaining err=0  RemainingSteps=0
08:34:47 Filter is already there-color wheel unchanged
08:34:47 Received message from Master: op=Shutter serial=350288
08:34:47 Shutter LASER close
08:34:47 Received message from Camera: op=State serial=350290
08:34:47 GetSingleValue result=40  Value=cccccccc
08:34:47 SkyScan query
08:34:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:34:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:34:48 Parameters OK
08:34:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:34:48 Set A/D data flow result=40
08:34:48 Set A/D channel type result=40
08:34:48 Set A/D encoding result=40
08:34:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:34:48 Set channel filter=0.000000e+000  result=40
08:34:48 Config A/D  Result=40
08:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:34:48 Get A/D filter: -9.255963e+061  result=40
08:34:48 Get A/D value=-858993460  result=40
08:34:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:34:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:34:48 Parameters OK
08:34:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:34:48 Set A/D data flow result=40
08:34:48 Set A/D channel type result=40
08:34:48 Set A/D encoding result=40
08:34:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:34:48 Set channel filter=0.000000e+000  result=40
08:34:48 Config A/D  Result=40
08:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:34:48 Get A/D filter: -9.255963e+061  result=40
08:34:48 Get A/D value=-858993460  result=40
08:34:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:34:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:34:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:34:48 Aux=
08:34:48 Message to Camera, serial 350290 queued
08:35:24 Received message from Master: op=PointingHead serial=350302
08:35:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:35:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:35:24 Point started: ret=0
08:35:24 point_skyscan result=0
08:35:25 Check angles
08:35:25 SkyScan query
08:35:26 SkyScan query done: ret=0  az=136.125<-9075  ze=-6.51<-12434  Statuses=0009 0008
08:35:26 Msec=0  True Az=136.125  Ze=-6.51  Az status=0009  Ze status=0008
08:35:26 Check angles
08:35:26 SkyScan query
08:35:26 SkyScan query done: ret=0  az=153.915<-10261  ze=-6.495<-12433  Statuses=0009 0008
08:35:26 Msec=750  True Az=153.915  Ze=-6.495  Az status=0009  Ze status=0008
08:35:27 Check angles
08:35:27 SkyScan query
08:35:27 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.495<-12433  Statuses=0009 0008
08:35:27 Msec=1500  True Az=171.33  Ze=-6.495  Az status=0009  Ze status=0008
08:35:27 Check angles
08:35:27 SkyScan query
08:35:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:35:28 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:35:28 Message to Master queued w/err=0: serial=350302 error=0
08:35:33 Received message from Master: op=Filter serial=350303
08:35:33 Color wheel filter change from 0 to 0
08:35:33 FLIGetFilterPos err=0  currentPosition=0
08:35:33 FLIGetStepsRemaining err=0  RemainingSteps=0
08:35:33 Filter is already there-color wheel unchanged
08:35:33 Received message from Master: op=Shutter serial=350304
08:35:33 Shutter LASER close
08:35:33 Received message from Camera: op=State serial=350306
08:35:33 GetSingleValue result=40  Value=cccccccc
08:35:33 SkyScan query
08:35:34 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:35:34 Parameters OK
08:35:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:35:34 Set A/D data flow result=40
08:35:34 Set A/D channel type result=40
08:35:34 Set A/D encoding result=40
08:35:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:35:34 Set channel filter=0.000000e+000  result=40
08:35:34 Config A/D  Result=40
08:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:35:34 Get A/D filter: -9.255963e+061  result=40
08:35:34 Get A/D value=-858993460  result=40
08:35:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:35:34 Parameters OK
08:35:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:35:34 Set A/D data flow result=40
08:35:34 Set A/D channel type result=40
08:35:34 Set A/D encoding result=40
08:35:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:35:34 Set channel filter=0.000000e+000  result=40
08:35:34 Config A/D  Result=40
08:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:35:34 Get A/D filter: -9.255963e+061  result=40
08:35:34 Get A/D value=-858993460  result=40
08:35:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:35:34 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:35:34 Aux=
08:35:34 Message to Camera, serial 350306 queued
08:36:10 Received message from Master: op=PointingHead serial=350318
08:36:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:36:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:36:10 Point started: ret=0
08:36:10 point_skyscan result=0
08:36:11 Check angles
08:36:11 SkyScan query
08:36:11 SkyScan query done: ret=0  az=153.045<-10203  ze=6.51<-11566  Statuses=0009 0008
08:36:11 Msec=0  True Az=153.045  Ze=6.51  Az status=0009  Ze status=0008
08:36:11 Check angles
08:36:11 SkyScan query
08:36:12 SkyScan query done: ret=0  az=135.255<-9017  ze=6.495<-11567  Statuses=0009 0008
08:36:12 Msec=750  True Az=135.255  Ze=6.495  Az status=0009  Ze status=0008
08:36:12 Check angles
08:36:12 SkyScan query
08:36:13 SkyScan query done: ret=0  az=117.78<-7852  ze=6.495<-11567  Statuses=0009 0008
08:36:13 Msec=1500  True Az=117.78  Ze=6.495  Az status=0009  Ze status=0008
08:36:13 Check angles
08:36:13 SkyScan query
08:36:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:36:13 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:36:13 Message to Master queued w/err=0: serial=350318 error=0
08:36:18 Received message from Master: op=Filter serial=350319
08:36:18 Color wheel filter change from 0 to 0
08:36:18 FLIGetFilterPos err=0  currentPosition=0
08:36:18 FLIGetStepsRemaining err=0  RemainingSteps=0
08:36:18 Filter is already there-color wheel unchanged
08:36:19 Received message from Master: op=Shutter serial=350320
08:36:19 Shutter LASER close
08:36:19 Received message from Camera: op=State serial=350322
08:36:19 GetSingleValue result=40  Value=cccccccc
08:36:19 SkyScan query
08:36:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:36:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:36:19 Parameters OK
08:36:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:36:19 Set A/D data flow result=40
08:36:19 Set A/D channel type result=40
08:36:19 Set A/D encoding result=40
08:36:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:36:19 Set channel filter=0.000000e+000  result=40
08:36:19 Config A/D  Result=40
08:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:36:19 Get A/D filter: -9.255963e+061  result=40
08:36:19 Get A/D value=-858993460  result=40
08:36:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:36:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:36:19 Parameters OK
08:36:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:36:19 Set A/D data flow result=40
08:36:19 Set A/D channel type result=40
08:36:19 Set A/D encoding result=40
08:36:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:36:19 Set channel filter=0.000000e+000  result=40
08:36:19 Config A/D  Result=40
08:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:36:19 Get A/D filter: -9.255963e+061  result=40
08:36:19 Get A/D value=-858993460  result=40
08:36:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:36:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:36:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:36:19 Aux=
08:36:19 Message to Camera, serial 350322 queued
08:36:56 Received message from Master: op=PointingHead serial=350335
08:36:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:36:56 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:36:56 Point started: ret=0
08:36:56 point_skyscan result=0
08:36:57 Check angles
08:36:57 SkyScan query
08:36:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
08:36:58 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
08:36:58 Check angles
08:36:58 SkyScan query
08:36:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
08:36:59 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
08:36:59 Check angles
08:36:59 SkyScan query
08:36:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.43<-16362  Statuses=0008 0009
08:36:59 Msec=1500  True Az=112.995  Ze=-65.43  Az status=0008  Ze status=0009
08:36:59 Check angles
08:36:59 SkyScan query
08:37:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.385<-17759  Statuses=0008 0009
08:37:00 Msec=2250  True Az=112.995  Ze=-86.385  Az status=0008  Ze status=0009
08:37:00 Check angles
08:37:00 SkyScan query
08:37:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.325<-19155  Statuses=0008 0009
08:37:01 Msec=3000  True Az=112.995  Ze=-107.325  Az status=0008  Ze status=0009
08:37:01 Check angles
08:37:01 SkyScan query
08:37:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.295<-20553  Statuses=0008 0009
08:37:02 Msec=3750  True Az=112.995  Ze=-128.295  Az status=0008  Ze status=0009
08:37:02 Check angles
08:37:02 SkyScan query
08:37:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.265<-21951  Statuses=0008 0009
08:37:02 Msec=4500  True Az=112.995  Ze=-149.265  Az status=0008  Ze status=0009
08:37:02 Check angles
08:37:02 SkyScan query
08:37:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.19<-23346  Statuses=0008 0009
08:37:03 Msec=5250  True Az=112.995  Ze=-170.19  Az status=0008  Ze status=0009
08:37:03 Check angles
08:37:03 SkyScan query
08:37:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:37:04 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:37:04 Message to Master queued w/err=0: serial=350335 error=0
08:37:09 Received message from Master: op=Filter serial=350336
08:37:09 Color wheel filter change from 0 to 0
08:37:09 FLIGetFilterPos err=0  currentPosition=0
08:37:09 FLIGetStepsRemaining err=0  RemainingSteps=0
08:37:09 Filter is already there-color wheel unchanged
08:37:09 Received message from Master: op=Shutter serial=350337
08:37:09 Shutter LASER open
08:37:09 Received message from Camera: op=State serial=350339
08:37:09 GetSingleValue result=40  Value=cccccccc
08:37:09 SkyScan query
08:37:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:37:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:10 Parameters OK
08:37:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:10 Set A/D data flow result=40
08:37:10 Set A/D channel type result=40
08:37:10 Set A/D encoding result=40
08:37:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:10 Set channel filter=0.000000e+000  result=40
08:37:10 Config A/D  Result=40
08:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:10 Get A/D filter: -9.255963e+061  result=40
08:37:10 Get A/D value=-858993460  result=40
08:37:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:10 Parameters OK
08:37:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:10 Set A/D data flow result=40
08:37:10 Set A/D channel type result=40
08:37:10 Set A/D encoding result=40
08:37:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:10 Set channel filter=0.000000e+000  result=40
08:37:10 Config A/D  Result=40
08:37:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:10 Get A/D filter: -9.255963e+061  result=40
08:37:10 Get A/D value=-858993460  result=40
08:37:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:37:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:37:10 Aux=
08:37:10 Message to Camera, serial 350339 queued
08:37:18 Received message from Master: op=Shutter serial=350349
08:37:18 Shutter LASER close
08:37:19 Received message from Master: op=PointingHead serial=350353
08:37:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:37:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:37:19 Point started: ret=0
08:37:19 point_skyscan result=0
08:37:20 Check angles
08:37:20 SkyScan query
08:37:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.16<-21544  Statuses=0008 0009
08:37:20 Msec=0  True Az=112.995  Ze=-143.16  Az status=0008  Ze status=0009
08:37:20 Check angles
08:37:20 SkyScan query
08:37:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.205<-20147  Statuses=0008 0009
08:37:21 Msec=750  True Az=112.995  Ze=-122.205  Az status=0008  Ze status=0009
08:37:21 Check angles
08:37:21 SkyScan query
08:37:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.265<-18751  Statuses=0008 0009
08:37:22 Msec=1500  True Az=112.995  Ze=-101.265  Az status=0008  Ze status=0009
08:37:22 Check angles
08:37:22 SkyScan query
08:37:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
08:37:22 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
08:37:23 Check angles
08:37:23 SkyScan query
08:37:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
08:37:23 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
08:37:23 Check angles
08:37:23 SkyScan query
08:37:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
08:37:24 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
08:37:24 Check angles
08:37:24 SkyScan query
08:37:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.46<-13164  Statuses=0008 0009
08:37:25 Msec=4500  True Az=112.995  Ze=-17.46  Az status=0008  Ze status=0009
08:37:25 Check angles
08:37:25 SkyScan query
08:37:25 SkyScan query done: ret=0  az=112.995<-7533  ze=3.525<-11765  Statuses=0008 0009
08:37:25 Msec=5250  True Az=112.995  Ze=3.525  Az status=0008  Ze status=0009
08:37:26 Check angles
08:37:26 SkyScan query
08:37:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:37:26 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:37:26 Message to Master queued w/err=0: serial=350353 error=0
08:37:31 Received message from Master: op=Filter serial=350354
08:37:31 Color wheel filter change from 0 to 0
08:37:31 FLIGetFilterPos err=0  currentPosition=0
08:37:31 FLIGetStepsRemaining err=0  RemainingSteps=0
08:37:31 Filter is already there-color wheel unchanged
08:37:31 Received message from Master: op=Shutter serial=350355
08:37:31 Shutter LASER close
08:37:32 Received message from Camera: op=State serial=350357
08:37:32 GetSingleValue result=40  Value=cccccccc
08:37:32 SkyScan query
08:37:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:37:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:32 Parameters OK
08:37:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:32 Set A/D data flow result=40
08:37:32 Set A/D channel type result=40
08:37:32 Set A/D encoding result=40
08:37:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:32 Set channel filter=0.000000e+000  result=40
08:37:32 Config A/D  Result=40
08:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:32 Get A/D filter: -9.255963e+061  result=40
08:37:32 Get A/D value=-858993460  result=40
08:37:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:32 Parameters OK
08:37:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:32 Set A/D data flow result=40
08:37:32 Set A/D channel type result=40
08:37:32 Set A/D encoding result=40
08:37:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:32 Set channel filter=0.000000e+000  result=40
08:37:32 Config A/D  Result=40
08:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:32 Get A/D filter: -9.255963e+061  result=40
08:37:32 Get A/D value=-858993460  result=40
08:37:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:37:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:37:32 Aux=
08:37:32 Message to Camera, serial 350357 queued
08:38:09 Received message from Master: op=PointingHead serial=350370
08:38:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:38:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:38:09 Point started: ret=0
08:38:09 point_skyscan result=0
08:38:10 Check angles
08:38:10 SkyScan query
08:38:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:38:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:38:11 Message to Master queued w/err=0: serial=350370 error=0
08:38:16 Received message from Master: op=Filter serial=350371
08:38:16 Color wheel filter change from 0 to 0
08:38:16 FLIGetFilterPos err=0  currentPosition=0
08:38:16 FLIGetStepsRemaining err=0  RemainingSteps=0
08:38:16 Filter is already there-color wheel unchanged
08:38:16 Received message from Master: op=Shutter serial=350372
08:38:16 Shutter LASER close
08:38:16 Received message from Camera: op=State serial=350374
08:38:16 GetSingleValue result=40  Value=cccccccc
08:38:16 SkyScan query
08:38:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:38:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:38:16 Parameters OK
08:38:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:38:16 Set A/D data flow result=40
08:38:16 Set A/D channel type result=40
08:38:16 Set A/D encoding result=40
08:38:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:38:16 Set channel filter=0.000000e+000  result=40
08:38:16 Config A/D  Result=40
08:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:38:16 Get A/D filter: -9.255963e+061  result=40
08:38:16 Get A/D value=-858993460  result=40
08:38:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:38:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:38:16 Parameters OK
08:38:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:38:16 Set A/D data flow result=40
08:38:16 Set A/D channel type result=40
08:38:16 Set A/D encoding result=40
08:38:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:38:16 Set channel filter=0.000000e+000  result=40
08:38:16 Config A/D  Result=40
08:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:38:16 Get A/D filter: -9.255963e+061  result=40
08:38:16 Get A/D value=-858993460  result=40
08:38:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:38:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:38:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:38:16 Aux=
08:38:16 Message to Camera, serial 350374 queued
08:38:53 Received message from Master: op=PointingHead serial=350387
08:38:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:38:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:38:54 Point started: ret=0
08:38:54 point_skyscan result=0
08:38:54 Check angles
08:38:54 SkyScan query
08:38:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:38:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:38:55 Message to Master queued w/err=0: serial=350387 error=0
08:39:00 Received message from Master: op=Filter serial=350388
08:39:00 Color wheel filter change from 0 to 0
08:39:00 FLIGetFilterPos err=0  currentPosition=0
08:39:00 FLIGetStepsRemaining err=0  RemainingSteps=0
08:39:00 Filter is already there-color wheel unchanged
08:39:00 Received message from Master: op=Shutter serial=350389
08:39:00 Shutter LASER close
08:39:00 Received message from Camera: op=State serial=350391
08:39:00 GetSingleValue result=40  Value=cccccccc
08:39:00 SkyScan query
08:39:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:39:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:39:01 Parameters OK
08:39:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:39:01 Set A/D data flow result=40
08:39:01 Set A/D channel type result=40
08:39:01 Set A/D encoding result=40
08:39:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:39:01 Set channel filter=0.000000e+000  result=40
08:39:01 Config A/D  Result=40
08:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:39:01 Get A/D filter: -9.255963e+061  result=40
08:39:01 Get A/D value=-858993460  result=40
08:39:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:39:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:39:01 Parameters OK
08:39:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:39:01 Set A/D data flow result=40
08:39:01 Set A/D channel type result=40
08:39:01 Set A/D encoding result=40
08:39:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:39:01 Set channel filter=0.000000e+000  result=40
08:39:01 Config A/D  Result=40
08:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:39:01 Get A/D filter: -9.255963e+061  result=40
08:39:01 Get A/D value=-858993460  result=40
08:39:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:39:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:39:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:39:01 Aux=
08:39:01 Message to Camera, serial 350391 queued
08:39:38 Received message from Master: op=PointingHead serial=350404
08:39:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:39:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:39:38 Point started: ret=0
08:39:38 point_skyscan result=0
08:39:39 Check angles
08:39:39 SkyScan query
08:39:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:39:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:39:39 Message to Master queued w/err=0: serial=350404 error=0
08:39:44 Received message from Master: op=Filter serial=350405
08:39:44 Color wheel filter change from 0 to 0
08:39:44 FLIGetFilterPos err=0  currentPosition=0
08:39:44 FLIGetStepsRemaining err=0  RemainingSteps=0
08:39:44 Filter is already there-color wheel unchanged
08:39:44 Received message from Master: op=Shutter serial=350406
08:39:44 Shutter LASER close
08:39:44 Received message from Camera: op=State serial=350408
08:39:44 GetSingleValue result=40  Value=cccccccc
08:39:44 SkyScan query
08:39:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:39:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:39:45 Parameters OK
08:39:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:39:45 Set A/D data flow result=40
08:39:45 Set A/D channel type result=40
08:39:45 Set A/D encoding result=40
08:39:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:39:45 Set channel filter=0.000000e+000  result=40
08:39:45 Config A/D  Result=40
08:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:39:45 Get A/D filter: -9.255963e+061  result=40
08:39:45 Get A/D value=-858993460  result=40
08:39:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:39:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:39:45 Parameters OK
08:39:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:39:45 Set A/D data flow result=40
08:39:45 Set A/D channel type result=40
08:39:45 Set A/D encoding result=40
08:39:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:39:45 Set channel filter=0.000000e+000  result=40
08:39:45 Config A/D  Result=40
08:39:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:39:45 Get A/D filter: -9.255963e+061  result=40
08:39:45 Get A/D value=-858993460  result=40
08:39:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:39:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:39:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:39:45 Aux=
08:39:45 Message to Camera, serial 350408 queued
08:40:21 Received message from Master: op=PointingHead serial=350420
08:40:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:40:21 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:40:21 Point started: ret=0
08:40:21 point_skyscan result=0
08:40:22 Check angles
08:40:22 SkyScan query
08:40:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
08:40:23 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
08:40:23 Check angles
08:40:23 SkyScan query
08:40:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.295<-14953  Statuses=0008 0009
08:40:23 Msec=750  True Az=112.995  Ze=-44.295  Az status=0008  Ze status=0009
08:40:24 Check angles
08:40:24 SkyScan query
08:40:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.25<-16350  Statuses=0008 0009
08:40:24 Msec=1500  True Az=112.995  Ze=-65.25  Az status=0008  Ze status=0009
08:40:24 Check angles
08:40:24 SkyScan query
08:40:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.22<-17748  Statuses=0008 0009
08:40:25 Msec=2250  True Az=112.995  Ze=-86.22  Az status=0008  Ze status=0009
08:40:25 Check angles
08:40:25 SkyScan query
08:40:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.145<-19143  Statuses=0008 0009
08:40:26 Msec=3000  True Az=112.995  Ze=-107.145  Az status=0008  Ze status=0009
08:40:26 Check angles
08:40:26 SkyScan query
08:40:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.1<-20540  Statuses=0008 0009
08:40:26 Msec=3750  True Az=112.995  Ze=-128.1  Az status=0008  Ze status=0009
08:40:27 Check angles
08:40:27 SkyScan query
08:40:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.07<-21938  Statuses=0008 0009
08:40:27 Msec=4500  True Az=112.995  Ze=-149.07  Az status=0008  Ze status=0009
08:40:27 Check angles
08:40:27 SkyScan query
08:40:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.995<-23333  Statuses=0008 0009
08:40:28 Msec=5250  True Az=112.995  Ze=-169.995  Az status=0008  Ze status=0009
08:40:28 Check angles
08:40:28 SkyScan query
08:40:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:40:29 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:40:29 Message to Master queued w/err=0: serial=350420 error=0
08:40:34 Received message from Master: op=Filter serial=350421
08:40:34 Color wheel filter change from 0 to 0
08:40:34 FLIGetFilterPos err=0  currentPosition=0
08:40:34 FLIGetStepsRemaining err=0  RemainingSteps=0
08:40:34 Filter is already there-color wheel unchanged
08:40:34 Received message from Master: op=Shutter serial=350422
08:40:34 Shutter LASER open
08:40:34 Received message from Camera: op=State serial=350424
08:40:34 GetSingleValue result=40  Value=cccccccc
08:40:34 SkyScan query
08:40:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:40:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:35 Parameters OK
08:40:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:35 Set A/D data flow result=40
08:40:35 Set A/D channel type result=40
08:40:35 Set A/D encoding result=40
08:40:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:35 Set channel filter=0.000000e+000  result=40
08:40:35 Config A/D  Result=40
08:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:35 Get A/D filter: -9.255963e+061  result=40
08:40:35 Get A/D value=-858993460  result=40
08:40:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:35 Parameters OK
08:40:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:35 Set A/D data flow result=40
08:40:35 Set A/D channel type result=40
08:40:35 Set A/D encoding result=40
08:40:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:35 Set channel filter=0.000000e+000  result=40
08:40:35 Config A/D  Result=40
08:40:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:35 Get A/D filter: -9.255963e+061  result=40
08:40:35 Get A/D value=-858993460  result=40
08:40:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:40:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:40:35 Aux=
08:40:35 Message to Camera, serial 350424 queued
08:40:43 Received message from Master: op=Shutter serial=350434
08:40:43 Shutter LASER close
08:40:44 Received message from Master: op=PointingHead serial=350438
08:40:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:40:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:40:44 Point started: ret=0
08:40:44 point_skyscan result=0
08:40:45 Check angles
08:40:45 SkyScan query
08:40:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.325<-21555  Statuses=0008 0009
08:40:45 Msec=0  True Az=112.995  Ze=-143.325  Az status=0008  Ze status=0009
08:40:45 Check angles
08:40:45 SkyScan query
08:40:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.385<-20159  Statuses=0008 0009
08:40:46 Msec=750  True Az=112.995  Ze=-122.385  Az status=0008  Ze status=0009
08:40:46 Check angles
08:40:46 SkyScan query
08:40:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.43<-18762  Statuses=0008 0009
08:40:47 Msec=1500  True Az=112.995  Ze=-101.43  Az status=0008  Ze status=0009
08:40:47 Check angles
08:40:47 SkyScan query
08:40:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.475<-17365  Statuses=0008 0009
08:40:47 Msec=2250  True Az=112.995  Ze=-80.475  Az status=0008  Ze status=0009
08:40:48 Check angles
08:40:48 SkyScan query
08:40:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.085<-15939  Statuses=0008 0009
08:40:48 Msec=3000  True Az=112.995  Ze=-59.085  Az status=0008  Ze status=0009
08:40:48 Check angles
08:40:48 SkyScan query
08:40:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.115<-14541  Statuses=0008 0009
08:40:49 Msec=3750  True Az=112.995  Ze=-38.115  Az status=0008  Ze status=0009
08:40:49 Check angles
08:40:49 SkyScan query
08:40:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
08:40:50 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
08:40:50 Check angles
08:40:50 SkyScan query
08:40:50 SkyScan query done: ret=0  az=112.995<-7533  ze=4.185<-11721  Statuses=0008 0009
08:40:50 Msec=5250  True Az=112.995  Ze=4.185  Az status=0008  Ze status=0009
08:40:51 Check angles
08:40:51 SkyScan query
08:40:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:40:51 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:40:51 Message to Master queued w/err=0: serial=350438 error=0
08:40:56 Received message from Master: op=Filter serial=350439
08:40:56 Color wheel filter change from 0 to 0
08:40:56 FLIGetFilterPos err=0  currentPosition=0
08:40:56 FLIGetStepsRemaining err=0  RemainingSteps=0
08:40:56 Filter is already there-color wheel unchanged
08:40:56 Received message from Master: op=Shutter serial=350440
08:40:56 Shutter LASER close
08:40:57 Received message from Camera: op=State serial=350442
08:40:57 GetSingleValue result=40  Value=cccccccc
08:40:57 SkyScan query
08:40:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:40:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:57 Parameters OK
08:40:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:57 Set A/D data flow result=40
08:40:57 Set A/D channel type result=40
08:40:57 Set A/D encoding result=40
08:40:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:57 Set channel filter=0.000000e+000  result=40
08:40:57 Config A/D  Result=40
08:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:57 Get A/D filter: -9.255963e+061  result=40
08:40:57 Get A/D value=-858993460  result=40
08:40:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:57 Parameters OK
08:40:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:57 Set A/D data flow result=40
08:40:57 Set A/D channel type result=40
08:40:57 Set A/D encoding result=40
08:40:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:57 Set channel filter=0.000000e+000  result=40
08:40:57 Config A/D  Result=40
08:40:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:57 Get A/D filter: -9.255963e+061  result=40
08:40:57 Get A/D value=-858993460  result=40
08:40:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:40:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:40:57 Aux=
08:40:57 Message to Camera, serial 350442 queued
08:41:34 Received message from Master: op=PointingHead serial=350455
08:41:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:41:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:41:34 Point started: ret=0
08:41:34 point_skyscan result=0
08:41:35 Check angles
08:41:35 SkyScan query
08:41:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:41:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:41:36 Message to Master queued w/err=0: serial=350455 error=0
08:41:41 Received message from Master: op=Filter serial=350456
08:41:41 Color wheel filter change from 0 to 0
08:41:41 FLIGetFilterPos err=0  currentPosition=0
08:41:41 FLIGetStepsRemaining err=0  RemainingSteps=0
08:41:41 Filter is already there-color wheel unchanged
08:41:41 Received message from Master: op=Shutter serial=350457
08:41:41 Shutter LASER close
08:41:41 Received message from Camera: op=State serial=350459
08:41:41 GetSingleValue result=40  Value=cccccccc
08:41:41 SkyScan query
08:41:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:41:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:41:41 Parameters OK
08:41:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:41:41 Set A/D data flow result=40
08:41:41 Set A/D channel type result=40
08:41:41 Set A/D encoding result=40
08:41:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:41:41 Set channel filter=0.000000e+000  result=40
08:41:41 Config A/D  Result=40
08:41:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:41:41 Get A/D filter: -9.255963e+061  result=40
08:41:41 Get A/D value=-858993460  result=40
08:41:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:41:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:41:41 Parameters OK
08:41:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:41:41 Set A/D data flow result=40
08:41:41 Set A/D channel type result=40
08:41:41 Set A/D encoding result=40
08:41:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:41:41 Set channel filter=0.000000e+000  result=40
08:41:41 Config A/D  Result=40
08:41:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:41:41 Get A/D filter: -9.255963e+061  result=40
08:41:41 Get A/D value=-858993460  result=40
08:41:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:41:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:41:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:41:41 Aux=
08:41:41 Message to Camera, serial 350459 queued
08:42:18 Received message from Master: op=PointingHead serial=350472
08:42:18 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:42:18 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:42:19 Point started: ret=0
08:42:19 point_skyscan result=0
08:42:19 Check angles
08:42:19 SkyScan query
08:42:20 SkyScan query done: ret=0  az=135.75<-9050  ze=-6.51<-12434  Statuses=0009 0008
08:42:20 Msec=0  True Az=135.75  Ze=-6.51  Az status=0009  Ze status=0008
08:42:20 Check angles
08:42:20 SkyScan query
08:42:21 SkyScan query done: ret=0  az=153.63<-10242  ze=-6.495<-12433  Statuses=0009 0008
08:42:21 Msec=750  True Az=153.63  Ze=-6.495  Az status=0009  Ze status=0008
08:42:21 Check angles
08:42:21 SkyScan query
08:42:21 SkyScan query done: ret=0  az=171.06<-11404  ze=-6.495<-12433  Statuses=0009 0008
08:42:21 Msec=1500  True Az=171.06  Ze=-6.495  Az status=0009  Ze status=0008
08:42:22 Check angles
08:42:22 SkyScan query
08:42:22 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:42:22 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:42:22 Message to Master queued w/err=0: serial=350472 error=0
08:42:27 Received message from Master: op=Filter serial=350473
08:42:27 Color wheel filter change from 0 to 0
08:42:27 FLIGetFilterPos err=0  currentPosition=0
08:42:27 FLIGetStepsRemaining err=0  RemainingSteps=0
08:42:27 Filter is already there-color wheel unchanged
08:42:27 Received message from Master: op=Shutter serial=350474
08:42:27 Shutter LASER close
08:42:27 Received message from Camera: op=State serial=350476
08:42:27 GetSingleValue result=40  Value=cccccccc
08:42:27 SkyScan query
08:42:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:42:28 Parameters OK
08:42:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:42:28 Set A/D data flow result=40
08:42:28 Set A/D channel type result=40
08:42:28 Set A/D encoding result=40
08:42:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:42:28 Set channel filter=0.000000e+000  result=40
08:42:28 Config A/D  Result=40
08:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:42:28 Get A/D filter: -9.255963e+061  result=40
08:42:28 Get A/D value=-858993460  result=40
08:42:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:42:28 Parameters OK
08:42:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:42:28 Set A/D data flow result=40
08:42:28 Set A/D channel type result=40
08:42:28 Set A/D encoding result=40
08:42:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:42:28 Set channel filter=0.000000e+000  result=40
08:42:28 Config A/D  Result=40
08:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:42:28 Get A/D filter: -9.255963e+061  result=40
08:42:28 Get A/D value=-858993460  result=40
08:42:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:42:28 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:42:28 Aux=
08:42:28 Message to Camera, serial 350476 queued
08:43:05 Received message from Master: op=PointingHead serial=350489
08:43:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:43:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:43:05 Point started: ret=0
08:43:05 point_skyscan result=0
08:43:06 Check angles
08:43:06 SkyScan query
08:43:06 SkyScan query done: ret=0  az=152.94<-10196  ze=6.51<-11566  Statuses=0009 0008
08:43:06 Msec=0  True Az=152.94  Ze=6.51  Az status=0009  Ze status=0008
08:43:07 Check angles
08:43:07 SkyScan query
08:43:07 SkyScan query done: ret=0  az=135.495<-9033  ze=6.495<-11567  Statuses=0009 0008
08:43:07 Msec=750  True Az=135.495  Ze=6.495  Az status=0009  Ze status=0008
08:43:07 Check angles
08:43:07 SkyScan query
08:43:08 SkyScan query done: ret=0  az=117.93<-7862  ze=6.495<-11567  Statuses=0009 0008
08:43:08 Msec=1500  True Az=117.93  Ze=6.495  Az status=0009  Ze status=0008
08:43:08 Check angles
08:43:08 SkyScan query
08:43:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:43:09 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:43:09 Message to Master queued w/err=0: serial=350489 error=0
08:43:14 Received message from Master: op=Filter serial=350490
08:43:14 Color wheel filter change from 0 to 0
08:43:14 FLIGetFilterPos err=0  currentPosition=0
08:43:14 FLIGetStepsRemaining err=0  RemainingSteps=0
08:43:14 Filter is already there-color wheel unchanged
08:43:14 Received message from Master: op=Shutter serial=350491
08:43:14 Shutter LASER close
08:43:14 Received message from Camera: op=State serial=350493
08:43:14 GetSingleValue result=40  Value=cccccccc
08:43:14 SkyScan query
08:43:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:43:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:43:15 Parameters OK
08:43:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:43:15 Set A/D data flow result=40
08:43:15 Set A/D channel type result=40
08:43:15 Set A/D encoding result=40
08:43:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:43:15 Set channel filter=0.000000e+000  result=40
08:43:15 Config A/D  Result=40
08:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:43:15 Get A/D filter: -9.255963e+061  result=40
08:43:15 Get A/D value=-858993460  result=40
08:43:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:43:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:43:15 Parameters OK
08:43:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:43:15 Set A/D data flow result=40
08:43:15 Set A/D channel type result=40
08:43:15 Set A/D encoding result=40
08:43:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:43:15 Set channel filter=0.000000e+000  result=40
08:43:15 Config A/D  Result=40
08:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:43:15 Get A/D filter: -9.255963e+061  result=40
08:43:15 Get A/D value=-858993460  result=40
08:43:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:43:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:43:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:43:15 Aux=
08:43:15 Message to Camera, serial 350493 queued
[UTC 2019-3-19  08:43:48]
08:43:51 Received message from Master: op=PointingHead serial=350506
08:43:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:43:51 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:43:52 Point started: ret=0
08:43:52 point_skyscan result=0
08:43:52 Check angles
08:43:52 SkyScan query
08:43:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
08:43:53 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
08:43:53 Check angles
08:43:53 SkyScan query
08:43:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
08:43:54 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
08:43:54 Check angles
08:43:54 SkyScan query
08:43:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
08:43:55 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
08:43:55 Check angles
08:43:55 SkyScan query
08:43:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.28<-17752  Statuses=0008 0009
08:43:55 Msec=2250  True Az=112.995  Ze=-86.28  Az status=0008  Ze status=0009
08:43:55 Check angles
08:43:55 SkyScan query
08:43:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.7<-19180  Statuses=0008 0009
08:43:56 Msec=3000  True Az=112.995  Ze=-107.7  Az status=0008  Ze status=0009
08:43:56 Check angles
08:43:56 SkyScan query
08:43:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.06<-20604  Statuses=0008 0009
08:43:57 Msec=3750  True Az=112.995  Ze=-129.06  Az status=0008  Ze status=0009
08:43:57 Check angles
08:43:57 SkyScan query
08:43:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.465<-22031  Statuses=0008 0009
08:43:58 Msec=4500  True Az=112.995  Ze=-150.465  Az status=0008  Ze status=0009
08:43:58 Check angles
08:43:58 SkyScan query
08:43:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.195<-23413  Statuses=0008 0009
08:43:58 Msec=5250  True Az=112.995  Ze=-171.195  Az status=0008  Ze status=0009
08:43:59 Check angles
08:43:59 SkyScan query
08:43:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:43:59 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:43:59 Message to Master queued w/err=0: serial=350506 error=0
08:44:04 Received message from Master: op=Filter serial=350507
08:44:04 Color wheel filter change from 0 to 0
08:44:04 FLIGetFilterPos err=0  currentPosition=0
08:44:04 FLIGetStepsRemaining err=0  RemainingSteps=0
08:44:04 Filter is already there-color wheel unchanged
08:44:04 Received message from Master: op=Shutter serial=350508
08:44:04 Shutter LASER open
08:44:04 Received message from Camera: op=State serial=350510
08:44:04 GetSingleValue result=40  Value=cccccccc
08:44:04 SkyScan query
08:44:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:44:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:44:05 Parameters OK
08:44:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:44:05 Set A/D data flow result=40
08:44:05 Set A/D channel type result=40
08:44:05 Set A/D encoding result=40
08:44:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:44:05 Set channel filter=0.000000e+000  result=40
08:44:05 Config A/D  Result=40
08:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:44:05 Get A/D filter: -9.255963e+061  result=40
08:44:05 Get A/D value=-858993460  result=40
08:44:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:44:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:44:05 Parameters OK
08:44:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:44:05 Set A/D data flow result=40
08:44:05 Set A/D channel type result=40
08:44:05 Set A/D encoding result=40
08:44:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:44:05 Set channel filter=0.000000e+000  result=40
08:44:05 Config A/D  Result=40
08:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:44:05 Get A/D filter: -9.255963e+061  result=40
08:44:05 Get A/D value=-858993460  result=40
08:44:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:44:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:44:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:44:05 Aux=
08:44:05 Message to Camera, serial 350510 queued
08:44:13 Received message from Master: op=Shutter serial=350520
08:44:13 Shutter LASER close
08:44:14 Received message from Master: op=PointingHead serial=350524
08:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:44:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:44:14 Point started: ret=0
08:44:14 point_skyscan result=0
08:44:15 Check angles
08:44:15 SkyScan query
08:44:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
08:44:16 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
08:44:16 Check angles
08:44:16 SkyScan query
08:44:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.44<-20096  Statuses=0008 0009
08:44:16 Msec=750  True Az=112.995  Ze=-121.44  Az status=0008  Ze status=0009
08:44:17 Check angles
08:44:17 SkyScan query
08:44:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.5<-18700  Statuses=0008 0009
08:44:17 Msec=1500  True Az=112.995  Ze=-100.5  Az status=0008  Ze status=0009
08:44:17 Check angles
08:44:17 SkyScan query
08:44:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.05<-17270  Statuses=0008 0009
08:44:18 Msec=2250  True Az=112.995  Ze=-79.05  Az status=0008  Ze status=0009
08:44:18 Check angles
08:44:18 SkyScan query
08:44:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.69<-15846  Statuses=0008 0009
08:44:19 Msec=3000  True Az=112.995  Ze=-57.69  Az status=0008  Ze status=0009
08:44:19 Check angles
08:44:19 SkyScan query
08:44:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.27<-14418  Statuses=0008 0009
08:44:19 Msec=3750  True Az=112.995  Ze=-36.27  Az status=0008  Ze status=0009
08:44:20 Check angles
08:44:20 SkyScan query
08:44:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.33<-13022  Statuses=0008 0009
08:44:20 Msec=4500  True Az=112.995  Ze=-15.33  Az status=0008  Ze status=0009
08:44:20 Check angles
08:44:20 SkyScan query
08:44:21 SkyScan query done: ret=0  az=112.995<-7533  ze=5.235<-11651  Statuses=0008 0009
08:44:21 Msec=5250  True Az=112.995  Ze=5.235  Az status=0008  Ze status=0009
08:44:21 Check angles
08:44:21 SkyScan query
08:44:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:44:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:44:22 Message to Master queued w/err=0: serial=350524 error=0
08:44:27 Received message from Master: op=Filter serial=350525
08:44:27 Color wheel filter change from 0 to 0
08:44:27 FLIGetFilterPos err=0  currentPosition=0
08:44:27 FLIGetStepsRemaining err=0  RemainingSteps=0
08:44:27 Filter is already there-color wheel unchanged
08:44:27 Received message from Master: op=Shutter serial=350526
08:44:27 Shutter LASER close
08:44:27 Received message from Camera: op=State serial=350528
08:44:27 GetSingleValue result=40  Value=cccccccc
08:44:27 SkyScan query
08:44:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:44:28 Parameters OK
08:44:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:44:28 Set A/D data flow result=40
08:44:28 Set A/D channel type result=40
08:44:28 Set A/D encoding result=40
08:44:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:44:28 Set channel filter=0.000000e+000  result=40
08:44:28 Config A/D  Result=40
08:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:44:28 Get A/D filter: -9.255963e+061  result=40
08:44:28 Get A/D value=-858993460  result=40
08:44:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:44:28 Parameters OK
08:44:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:44:28 Set A/D data flow result=40
08:44:28 Set A/D channel type result=40
08:44:28 Set A/D encoding result=40
08:44:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:44:28 Set channel filter=0.000000e+000  result=40
08:44:28 Config A/D  Result=40
08:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:44:28 Get A/D filter: -9.255963e+061  result=40
08:44:28 Get A/D value=-858993460  result=40
08:44:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:44:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:44:28 Aux=
08:44:28 Message to Camera, serial 350528 queued
08:45:04 Received message from Master: op=PointingHead serial=350541
08:45:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:45:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:45:05 Point started: ret=0
08:45:05 point_skyscan result=0
08:45:06 Check angles
08:45:06 SkyScan query
08:45:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:45:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:45:06 Message to Master queued w/err=0: serial=350541 error=0
08:45:11 Received message from Master: op=Filter serial=350542
08:45:11 Color wheel filter change from 0 to 0
08:45:11 FLIGetFilterPos err=0  currentPosition=0
08:45:11 FLIGetStepsRemaining err=0  RemainingSteps=0
08:45:11 Filter is already there-color wheel unchanged
08:45:11 Received message from Master: op=Shutter serial=350543
08:45:11 Shutter LASER close
08:45:11 Received message from Camera: op=State serial=350545
08:45:11 GetSingleValue result=40  Value=cccccccc
08:45:11 SkyScan query
08:45:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:45:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:45:12 Parameters OK
08:45:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:45:12 Set A/D data flow result=40
08:45:12 Set A/D channel type result=40
08:45:12 Set A/D encoding result=40
08:45:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:45:12 Set channel filter=0.000000e+000  result=40
08:45:12 Config A/D  Result=40
08:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:45:12 Get A/D filter: -9.255963e+061  result=40
08:45:12 Get A/D value=-858993460  result=40
08:45:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:45:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:45:12 Parameters OK
08:45:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:45:12 Set A/D data flow result=40
08:45:12 Set A/D channel type result=40
08:45:12 Set A/D encoding result=40
08:45:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:45:12 Set channel filter=0.000000e+000  result=40
08:45:12 Config A/D  Result=40
08:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:45:12 Get A/D filter: -9.255963e+061  result=40
08:45:12 Get A/D value=-858993460  result=40
08:45:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:45:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:45:12 Aux=
08:45:12 Message to Camera, serial 350545 queued
08:45:49 Received message from Master: op=PointingHead serial=350558
08:45:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:45:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:45:49 Point started: ret=0
08:45:49 point_skyscan result=0
08:45:50 Check angles
08:45:50 SkyScan query
08:45:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:45:50 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:45:50 Message to Master queued w/err=0: serial=350558 error=0
08:45:55 Received message from Master: op=Filter serial=350559
08:45:55 Color wheel filter change from 0 to 0
08:45:55 FLIGetFilterPos err=0  currentPosition=0
08:45:55 FLIGetStepsRemaining err=0  RemainingSteps=0
08:45:55 Filter is already there-color wheel unchanged
08:45:56 Received message from Master: op=Shutter serial=350560
08:45:56 Shutter LASER close
08:45:56 Received message from Camera: op=State serial=350562
08:45:56 GetSingleValue result=40  Value=cccccccc
08:45:56 SkyScan query
08:45:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:45:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:45:56 Parameters OK
08:45:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:45:56 Set A/D data flow result=40
08:45:56 Set A/D channel type result=40
08:45:56 Set A/D encoding result=40
08:45:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:45:56 Set channel filter=0.000000e+000  result=40
08:45:56 Config A/D  Result=40
08:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:45:56 Get A/D filter: -9.255963e+061  result=40
08:45:56 Get A/D value=-858993460  result=40
08:45:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:45:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:45:56 Parameters OK
08:45:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:45:56 Set A/D data flow result=40
08:45:56 Set A/D channel type result=40
08:45:56 Set A/D encoding result=40
08:45:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:45:56 Set channel filter=0.000000e+000  result=40
08:45:56 Config A/D  Result=40
08:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:45:56 Get A/D filter: -9.255963e+061  result=40
08:45:56 Get A/D value=-858993460  result=40
08:45:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:45:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:45:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:45:56 Aux=
08:45:56 Message to Camera, serial 350562 queued
08:46:33 Received message from Master: op=PointingHead serial=350575
08:46:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:46:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:46:33 Point started: ret=0
08:46:33 point_skyscan result=0
08:46:34 Check angles
08:46:34 SkyScan query
08:46:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.48<-11568  Statuses=0008 0008
08:46:35 Msec=0  True Az=112.995  Ze=6.48  Az status=0008  Ze status=0008
08:46:35 Message to Master queued w/err=0: serial=350575 error=0
08:46:40 Received message from Master: op=Filter serial=350576
08:46:40 Color wheel filter change from 0 to 0
08:46:40 FLIGetFilterPos err=0  currentPosition=0
08:46:40 FLIGetStepsRemaining err=0  RemainingSteps=0
08:46:40 Filter is already there-color wheel unchanged
08:46:40 Received message from Master: op=Shutter serial=350577
08:46:40 Shutter LASER close
08:46:40 Received message from Camera: op=State serial=350579
08:46:40 GetSingleValue result=40  Value=cccccccc
08:46:40 SkyScan query
08:46:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:46:40 Parameters OK
08:46:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:46:40 Set A/D data flow result=40
08:46:40 Set A/D channel type result=40
08:46:40 Set A/D encoding result=40
08:46:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:46:40 Set channel filter=0.000000e+000  result=40
08:46:40 Config A/D  Result=40
08:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:46:40 Get A/D filter: -9.255963e+061  result=40
08:46:40 Get A/D value=-858993460  result=40
08:46:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:46:40 Parameters OK
08:46:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:46:40 Set A/D data flow result=40
08:46:40 Set A/D channel type result=40
08:46:40 Set A/D encoding result=40
08:46:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:46:40 Set channel filter=0.000000e+000  result=40
08:46:40 Config A/D  Result=40
08:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:46:40 Get A/D filter: -9.255963e+061  result=40
08:46:40 Get A/D value=-858993460  result=40
08:46:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:46:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:46:40 Aux=
08:46:40 Message to Camera, serial 350579 queued
08:47:17 Received message from Master: op=PointingHead serial=350592
08:47:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:47:17 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:47:18 Point started: ret=0
08:47:18 point_skyscan result=0
08:47:18 Check angles
08:47:18 SkyScan query
08:47:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.76<-13584  Statuses=0008 0009
08:47:19 Msec=0  True Az=112.995  Ze=-23.76  Az status=0008  Ze status=0009
08:47:19 Check angles
08:47:19 SkyScan query
08:47:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.15<-15010  Statuses=0008 0009
08:47:20 Msec=750  True Az=112.995  Ze=-45.15  Az status=0008  Ze status=0009
08:47:20 Check angles
08:47:20 SkyScan query
08:47:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.105<-16407  Statuses=0008 0009
08:47:20 Msec=1500  True Az=112.995  Ze=-66.105  Az status=0008  Ze status=0009
08:47:21 Check angles
08:47:21 SkyScan query
08:47:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.045<-17803  Statuses=0008 0009
08:47:21 Msec=2250  True Az=112.995  Ze=-87.045  Az status=0008  Ze status=0009
08:47:21 Check angles
08:47:21 SkyScan query
08:47:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.435<-19229  Statuses=0008 0009
08:47:22 Msec=3000  True Az=112.995  Ze=-108.435  Az status=0008  Ze status=0009
08:47:22 Check angles
08:47:22 SkyScan query
08:47:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.39<-20626  Statuses=0008 0009
08:47:23 Msec=3750  True Az=112.995  Ze=-129.39  Az status=0008  Ze status=0009
08:47:23 Check angles
08:47:23 SkyScan query
08:47:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.345<-22023  Statuses=0008 0009
08:47:23 Msec=4500  True Az=112.995  Ze=-150.345  Az status=0008  Ze status=0009
08:47:24 Check angles
08:47:24 SkyScan query
08:47:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.45<-23430  Statuses=0008 0009
08:47:24 Msec=5250  True Az=112.995  Ze=-171.45  Az status=0008  Ze status=0009
08:47:24 Check angles
08:47:24 SkyScan query
08:47:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:47:25 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:47:25 Message to Master queued w/err=0: serial=350592 error=0
08:47:30 Received message from Master: op=Filter serial=350593
08:47:30 Color wheel filter change from 0 to 0
08:47:30 FLIGetFilterPos err=0  currentPosition=0
08:47:30 FLIGetStepsRemaining err=0  RemainingSteps=0
08:47:30 Filter is already there-color wheel unchanged
08:47:30 Received message from Master: op=Shutter serial=350594
08:47:30 Shutter LASER open
08:47:30 Received message from Camera: op=State serial=350596
08:47:30 GetSingleValue result=40  Value=cccccccc
08:47:30 SkyScan query
08:47:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:47:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:31 Parameters OK
08:47:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:31 Set A/D data flow result=40
08:47:31 Set A/D channel type result=40
08:47:31 Set A/D encoding result=40
08:47:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:31 Set channel filter=0.000000e+000  result=40
08:47:31 Config A/D  Result=40
08:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:31 Get A/D filter: -9.255963e+061  result=40
08:47:31 Get A/D value=-858993460  result=40
08:47:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:31 Parameters OK
08:47:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:31 Set A/D data flow result=40
08:47:31 Set A/D channel type result=40
08:47:31 Set A/D encoding result=40
08:47:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:31 Set channel filter=0.000000e+000  result=40
08:47:31 Config A/D  Result=40
08:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:31 Get A/D filter: -9.255963e+061  result=40
08:47:31 Get A/D value=-858993460  result=40
08:47:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:47:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:47:31 Aux=
08:47:31 Message to Camera, serial 350596 queued
08:47:39 Received message from Master: op=Shutter serial=350606
08:47:39 Shutter LASER close
08:47:40 Received message from Master: op=PointingHead serial=350610
08:47:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:47:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:47:40 Point started: ret=0
08:47:40 point_skyscan result=0
08:47:41 Check angles
08:47:41 SkyScan query
08:47:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
08:47:42 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
08:47:42 Check angles
08:47:42 SkyScan query
08:47:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.28<-20152  Statuses=0008 0009
08:47:42 Msec=750  True Az=112.995  Ze=-122.28  Az status=0008  Ze status=0009
08:47:43 Check angles
08:47:43 SkyScan query
08:47:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.355<-18757  Statuses=0008 0009
08:47:43 Msec=1500  True Az=112.995  Ze=-101.355  Az status=0008  Ze status=0009
08:47:43 Check angles
08:47:43 SkyScan query
08:47:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.385<-17359  Statuses=0008 0009
08:47:44 Msec=2250  True Az=112.995  Ze=-80.385  Az status=0008  Ze status=0009
08:47:44 Check angles
08:47:44 SkyScan query
08:47:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.445<-15963  Statuses=0008 0009
08:47:45 Msec=3000  True Az=112.995  Ze=-59.445  Az status=0008  Ze status=0009
08:47:45 Check angles
08:47:45 SkyScan query
08:47:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.46<-14564  Statuses=0008 0009
08:47:45 Msec=3750  True Az=112.995  Ze=-38.46  Az status=0008  Ze status=0009
08:47:46 Check angles
08:47:46 SkyScan query
08:47:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.52<-13168  Statuses=0008 0009
08:47:46 Msec=4500  True Az=112.995  Ze=-17.52  Az status=0008  Ze status=0009
08:47:46 Check angles
08:47:46 SkyScan query
08:47:47 SkyScan query done: ret=0  az=112.995<-7533  ze=3.465<-11769  Statuses=0008 0009
08:47:47 Msec=5250  True Az=112.995  Ze=3.465  Az status=0008  Ze status=0009
08:47:47 Check angles
08:47:47 SkyScan query
08:47:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:47:48 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:47:48 Message to Master queued w/err=0: serial=350610 error=0
08:47:53 Received message from Master: op=Filter serial=350611
08:47:53 Color wheel filter change from 0 to 0
08:47:53 FLIGetFilterPos err=0  currentPosition=0
08:47:53 FLIGetStepsRemaining err=0  RemainingSteps=0
08:47:53 Filter is already there-color wheel unchanged
08:47:53 Received message from Master: op=Shutter serial=350612
08:47:53 Shutter LASER close
08:47:53 Received message from Camera: op=State serial=350614
08:47:53 GetSingleValue result=40  Value=cccccccc
08:47:53 SkyScan query
08:47:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:54 Parameters OK
08:47:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:54 Set A/D data flow result=40
08:47:54 Set A/D channel type result=40
08:47:54 Set A/D encoding result=40
08:47:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:54 Set channel filter=0.000000e+000  result=40
08:47:54 Config A/D  Result=40
08:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:54 Get A/D filter: -9.255963e+061  result=40
08:47:54 Get A/D value=-858993460  result=40
08:47:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:54 Parameters OK
08:47:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:54 Set A/D data flow result=40
08:47:54 Set A/D channel type result=40
08:47:54 Set A/D encoding result=40
08:47:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:54 Set channel filter=0.000000e+000  result=40
08:47:54 Config A/D  Result=40
08:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:54 Get A/D filter: -9.255963e+061  result=40
08:47:54 Get A/D value=-858993460  result=40
08:47:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:47:54 Aux=
08:47:54 Message to Camera, serial 350614 queued
08:48:30 Received message from Master: op=PointingHead serial=350627
08:48:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:48:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:48:31 Point started: ret=0
08:48:31 point_skyscan result=0
08:48:31 Check angles
08:48:31 SkyScan query
08:48:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:48:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:48:32 Message to Master queued w/err=0: serial=350627 error=0
08:48:37 Received message from Master: op=Filter serial=350628
08:48:37 Color wheel filter change from 0 to 0
08:48:37 FLIGetFilterPos err=0  currentPosition=0
08:48:37 FLIGetStepsRemaining err=0  RemainingSteps=0
08:48:37 Filter is already there-color wheel unchanged
08:48:37 Received message from Master: op=Shutter serial=350629
08:48:37 Shutter LASER close
08:48:37 Received message from Camera: op=State serial=350631
08:48:37 GetSingleValue result=40  Value=cccccccc
08:48:37 SkyScan query
08:48:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:48:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:48:38 Parameters OK
08:48:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:48:38 Set A/D data flow result=40
08:48:38 Set A/D channel type result=40
08:48:38 Set A/D encoding result=40
08:48:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:48:38 Set channel filter=0.000000e+000  result=40
08:48:38 Config A/D  Result=40
08:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:48:38 Get A/D filter: -9.255963e+061  result=40
08:48:38 Get A/D value=-858993460  result=40
08:48:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:48:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:48:38 Parameters OK
08:48:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:48:38 Set A/D data flow result=40
08:48:38 Set A/D channel type result=40
08:48:38 Set A/D encoding result=40
08:48:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:48:38 Set channel filter=0.000000e+000  result=40
08:48:38 Config A/D  Result=40
08:48:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:48:38 Get A/D filter: -9.255963e+061  result=40
08:48:38 Get A/D value=-858993460  result=40
08:48:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:48:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:48:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:48:38 Aux=
08:48:38 Message to Camera, serial 350631 queued
08:49:15 Received message from Master: op=PointingHead serial=350644
08:49:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:49:15 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:49:15 Point started: ret=0
08:49:15 point_skyscan result=0
08:49:16 Check angles
08:49:16 SkyScan query
08:49:16 SkyScan query done: ret=0  az=136.155<-9077  ze=-6.51<-12434  Statuses=0009 0008
08:49:16 Msec=0  True Az=136.155  Ze=-6.51  Az status=0009  Ze status=0008
08:49:17 Check angles
08:49:17 SkyScan query
08:49:17 SkyScan query done: ret=0  az=153.645<-10243  ze=-6.495<-12433  Statuses=0009 0008
08:49:17 Msec=750  True Az=153.645  Ze=-6.495  Az status=0009  Ze status=0008
08:49:17 Check angles
08:49:17 SkyScan query
08:49:18 SkyScan query done: ret=0  az=171.21<-11414  ze=-6.495<-12433  Statuses=0009 0008
08:49:18 Msec=1500  True Az=171.21  Ze=-6.495  Az status=0009  Ze status=0008
08:49:18 Check angles
08:49:18 SkyScan query
08:49:19 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:49:19 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:49:19 Message to Master queued w/err=0: serial=350644 error=0
08:49:24 Received message from Master: op=Filter serial=350645
08:49:24 Color wheel filter change from 0 to 0
08:49:24 FLIGetFilterPos err=0  currentPosition=0
08:49:24 FLIGetStepsRemaining err=0  RemainingSteps=0
08:49:24 Filter is already there-color wheel unchanged
08:49:24 Received message from Master: op=Shutter serial=350646
08:49:24 Shutter LASER close
08:49:24 Received message from Camera: op=State serial=350648
08:49:24 GetSingleValue result=40  Value=cccccccc
08:49:24 SkyScan query
08:49:24 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:49:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:49:24 Parameters OK
08:49:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:49:24 Set A/D data flow result=40
08:49:24 Set A/D channel type result=40
08:49:24 Set A/D encoding result=40
08:49:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:49:24 Set channel filter=0.000000e+000  result=40
08:49:24 Config A/D  Result=40
08:49:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:49:24 Get A/D filter: -9.255963e+061  result=40
08:49:24 Get A/D value=-858993460  result=40
08:49:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:49:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:49:24 Parameters OK
08:49:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:49:24 Set A/D data flow result=40
08:49:24 Set A/D channel type result=40
08:49:24 Set A/D encoding result=40
08:49:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:49:24 Set channel filter=0.000000e+000  result=40
08:49:24 Config A/D  Result=40
08:49:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:49:24 Get A/D filter: -9.255963e+061  result=40
08:49:24 Get A/D value=-858993460  result=40
08:49:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:49:24 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:49:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:49:24 Aux=
08:49:24 Message to Camera, serial 350648 queued
08:50:01 Received message from Master: op=PointingHead serial=350661
08:50:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:50:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:50:02 Point started: ret=0
08:50:02 point_skyscan result=0
08:50:02 Check angles
08:50:02 SkyScan query
08:50:03 SkyScan query done: ret=0  az=152.895<-10193  ze=6.51<-11566  Statuses=0009 0008
08:50:03 Msec=0  True Az=152.895  Ze=6.51  Az status=0009  Ze status=0008
08:50:03 Check angles
08:50:03 SkyScan query
08:50:04 SkyScan query done: ret=0  az=135.495<-9033  ze=6.495<-11567  Statuses=0009 0008
08:50:04 Msec=750  True Az=135.495  Ze=6.495  Az status=0009  Ze status=0008
08:50:04 Check angles
08:50:04 SkyScan query
08:50:04 SkyScan query done: ret=0  az=118.08<-7872  ze=6.495<-11567  Statuses=0009 0008
08:50:04 Msec=1500  True Az=118.08  Ze=6.495  Az status=0009  Ze status=0008
08:50:05 Check angles
08:50:05 SkyScan query
08:50:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:50:05 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:50:05 Message to Master queued w/err=0: serial=350661 error=0
08:50:10 Received message from Master: op=Filter serial=350662
08:50:10 Color wheel filter change from 0 to 0
08:50:10 FLIGetFilterPos err=0  currentPosition=0
08:50:10 FLIGetStepsRemaining err=0  RemainingSteps=0
08:50:10 Filter is already there-color wheel unchanged
08:50:10 Received message from Master: op=Shutter serial=350663
08:50:10 Shutter LASER close
08:50:10 Received message from Camera: op=State serial=350665
08:50:10 GetSingleValue result=40  Value=cccccccc
08:50:10 SkyScan query
08:50:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:50:11 Parameters OK
08:50:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:50:11 Set A/D data flow result=40
08:50:11 Set A/D channel type result=40
08:50:11 Set A/D encoding result=40
08:50:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:50:11 Set channel filter=0.000000e+000  result=40
08:50:11 Config A/D  Result=40
08:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:50:11 Get A/D filter: -9.255963e+061  result=40
08:50:11 Get A/D value=-858993460  result=40
08:50:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:50:11 Parameters OK
08:50:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:50:11 Set A/D data flow result=40
08:50:11 Set A/D channel type result=40
08:50:11 Set A/D encoding result=40
08:50:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:50:11 Set channel filter=0.000000e+000  result=40
08:50:11 Config A/D  Result=40
08:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:50:11 Get A/D filter: -9.255963e+061  result=40
08:50:11 Get A/D value=-858993460  result=40
08:50:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:50:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:50:11 Aux=
08:50:11 Message to Camera, serial 350665 queued
08:50:48 Received message from Master: op=PointingHead serial=350678
08:50:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:50:48 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:50:48 Point started: ret=0
08:50:48 point_skyscan result=0
08:50:49 Check angles
08:50:49 SkyScan query
08:50:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.67<-13578  Statuses=0008 0009
08:50:50 Msec=0  True Az=112.995  Ze=-23.67  Az status=0008  Ze status=0009
08:50:50 Check angles
08:50:50 SkyScan query
08:50:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.075<-15005  Statuses=0008 0009
08:50:50 Msec=750  True Az=112.995  Ze=-45.075  Az status=0008  Ze status=0009
08:50:51 Check angles
08:50:51 SkyScan query
08:50:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.015<-16401  Statuses=0008 0009
08:50:51 Msec=1500  True Az=112.995  Ze=-66.015  Az status=0008  Ze status=0009
08:50:51 Check angles
08:50:51 SkyScan query
08:50:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.955<-17797  Statuses=0008 0009
08:50:52 Msec=2250  True Az=112.995  Ze=-86.955  Az status=0008  Ze status=0009
08:50:52 Check angles
08:50:52 SkyScan query
08:50:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.925<-19195  Statuses=0008 0009
08:50:53 Msec=3000  True Az=112.995  Ze=-107.925  Az status=0008  Ze status=0009
08:50:53 Check angles
08:50:53 SkyScan query
08:50:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.85<-20590  Statuses=0008 0009
08:50:53 Msec=3750  True Az=112.995  Ze=-128.85  Az status=0008  Ze status=0009
08:50:54 Check angles
08:50:54 SkyScan query
08:50:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.805<-21987  Statuses=0008 0009
08:50:54 Msec=4500  True Az=112.995  Ze=-149.805  Az status=0008  Ze status=0009
08:50:54 Check angles
08:50:54 SkyScan query
08:50:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.73<-23382  Statuses=0008 0009
08:50:55 Msec=5250  True Az=112.995  Ze=-170.73  Az status=0008  Ze status=0009
08:50:55 Check angles
08:50:55 SkyScan query
08:50:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:50:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:50:56 Message to Master queued w/err=0: serial=350678 error=0
08:51:01 Received message from Master: op=Filter serial=350679
08:51:01 Color wheel filter change from 0 to 0
08:51:01 FLIGetFilterPos err=0  currentPosition=0
08:51:01 FLIGetStepsRemaining err=0  RemainingSteps=0
08:51:01 Filter is already there-color wheel unchanged
08:51:01 Received message from Master: op=Shutter serial=350680
08:51:01 Shutter LASER open
08:51:01 Received message from Camera: op=State serial=350682
08:51:01 GetSingleValue result=40  Value=cccccccc
08:51:01 SkyScan query
08:51:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:51:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:51:02 Parameters OK
08:51:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:51:02 Set A/D data flow result=40
08:51:02 Set A/D channel type result=40
08:51:02 Set A/D encoding result=40
08:51:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:51:02 Set channel filter=0.000000e+000  result=40
08:51:02 Config A/D  Result=40
08:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:51:02 Get A/D filter: -9.255963e+061  result=40
08:51:02 Get A/D value=-858993460  result=40
08:51:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:51:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:51:02 Parameters OK
08:51:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:51:02 Set A/D data flow result=40
08:51:02 Set A/D channel type result=40
08:51:02 Set A/D encoding result=40
08:51:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:51:02 Set channel filter=0.000000e+000  result=40
08:51:02 Config A/D  Result=40
08:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:51:02 Get A/D filter: -9.255963e+061  result=40
08:51:02 Get A/D value=-858993460  result=40
08:51:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:51:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:51:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:51:02 Aux=
08:51:02 Message to Camera, serial 350682 queued
08:51:10 Received message from Master: op=Shutter serial=350692
08:51:10 Shutter LASER close
08:51:10 Received message from Master: op=PointingHead serial=350696
08:51:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:51:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:51:11 Point started: ret=0
08:51:11 point_skyscan result=0
08:51:12 Check angles
08:51:12 SkyScan query
08:51:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.205<-21547  Statuses=0008 0009
08:51:12 Msec=0  True Az=112.995  Ze=-143.205  Az status=0008  Ze status=0009
08:51:12 Check angles
08:51:12 SkyScan query
08:51:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.785<-20119  Statuses=0008 0009
08:51:13 Msec=750  True Az=112.995  Ze=-121.785  Az status=0008  Ze status=0009
08:51:13 Check angles
08:51:13 SkyScan query
08:51:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
08:51:14 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
08:51:14 Check angles
08:51:14 SkyScan query
08:51:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.89<-17326  Statuses=0008 0009
08:51:14 Msec=2250  True Az=112.995  Ze=-79.89  Az status=0008  Ze status=0009
08:51:15 Check angles
08:51:15 SkyScan query
08:51:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.485<-15899  Statuses=0008 0009
08:51:15 Msec=3000  True Az=112.995  Ze=-58.485  Az status=0008  Ze status=0009
08:51:15 Check angles
08:51:15 SkyScan query
08:51:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.545<-14503  Statuses=0008 0009
08:51:16 Msec=3750  True Az=112.995  Ze=-37.545  Az status=0008  Ze status=0009
08:51:16 Check angles
08:51:16 SkyScan query
08:51:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
08:51:17 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
08:51:17 Check angles
08:51:17 SkyScan query
08:51:17 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
08:51:17 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
08:51:18 Check angles
08:51:18 SkyScan query
08:51:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:51:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:51:18 Message to Master queued w/err=0: serial=350696 error=0
08:51:23 Received message from Master: op=Filter serial=350697
08:51:23 Color wheel filter change from 0 to 0
08:51:23 FLIGetFilterPos err=0  currentPosition=0
08:51:23 FLIGetStepsRemaining err=0  RemainingSteps=0
08:51:23 Filter is already there-color wheel unchanged
08:51:23 Received message from Master: op=Shutter serial=350698
08:51:23 Shutter LASER close
08:51:24 Received message from Camera: op=State serial=350700
08:51:24 GetSingleValue result=40  Value=cccccccc
08:51:24 SkyScan query
08:51:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:51:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:51:24 Parameters OK
08:51:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:51:24 Set A/D data flow result=40
08:51:24 Set A/D channel type result=40
08:51:24 Set A/D encoding result=40
08:51:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:51:24 Set channel filter=0.000000e+000  result=40
08:51:24 Config A/D  Result=40
08:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:51:24 Get A/D filter: -9.255963e+061  result=40
08:51:24 Get A/D value=-858993460  result=40
08:51:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:51:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:51:24 Parameters OK
08:51:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:51:24 Set A/D data flow result=40
08:51:24 Set A/D channel type result=40
08:51:24 Set A/D encoding result=40
08:51:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:51:24 Set channel filter=0.000000e+000  result=40
08:51:24 Config A/D  Result=40
08:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:51:24 Get A/D filter: -9.255963e+061  result=40
08:51:24 Get A/D value=-858993460  result=40
08:51:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:51:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:51:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:51:24 Aux=
08:51:24 Message to Camera, serial 350700 queued
08:52:01 Received message from Master: op=PointingHead serial=350713
08:52:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:52:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:52:01 Point started: ret=0
08:52:01 point_skyscan result=0
08:52:02 Check angles
08:52:02 SkyScan query
08:52:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:52:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:52:03 Message to Master queued w/err=0: serial=350713 error=0
08:52:08 Received message from Master: op=Filter serial=350714
08:52:08 Color wheel filter change from 0 to 0
08:52:08 FLIGetFilterPos err=0  currentPosition=0
08:52:08 FLIGetStepsRemaining err=0  RemainingSteps=0
08:52:08 Filter is already there-color wheel unchanged
08:52:08 Received message from Master: op=Shutter serial=350715
08:52:08 Shutter LASER close
08:52:08 Received message from Camera: op=State serial=350717
08:52:08 GetSingleValue result=40  Value=cccccccc
08:52:08 SkyScan query
08:52:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:52:08 Parameters OK
08:52:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:52:08 Set A/D data flow result=40
08:52:08 Set A/D channel type result=40
08:52:08 Set A/D encoding result=40
08:52:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:52:08 Set channel filter=0.000000e+000  result=40
08:52:08 Config A/D  Result=40
08:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:52:08 Get A/D filter: -9.255963e+061  result=40
08:52:08 Get A/D value=-858993460  result=40
08:52:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:52:08 Parameters OK
08:52:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:52:08 Set A/D data flow result=40
08:52:08 Set A/D channel type result=40
08:52:08 Set A/D encoding result=40
08:52:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:52:08 Set channel filter=0.000000e+000  result=40
08:52:08 Config A/D  Result=40
08:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:52:08 Get A/D filter: -9.255963e+061  result=40
08:52:08 Get A/D value=-858993460  result=40
08:52:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:52:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:52:08 Aux=
08:52:08 Message to Camera, serial 350717 queued
08:52:45 Received message from Master: op=PointingHead serial=350730
08:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:52:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:52:46 Point started: ret=0
08:52:46 point_skyscan result=0
08:52:46 Check angles
08:52:46 SkyScan query
08:52:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:52:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:52:47 Message to Master queued w/err=0: serial=350730 error=0
08:52:52 Received message from Master: op=Filter serial=350731
08:52:52 Color wheel filter change from 0 to 0
08:52:52 FLIGetFilterPos err=0  currentPosition=0
08:52:52 FLIGetStepsRemaining err=0  RemainingSteps=0
08:52:52 Filter is already there-color wheel unchanged
08:52:52 Received message from Master: op=Shutter serial=350732
08:52:52 Shutter LASER close
08:52:52 Received message from Camera: op=State serial=350734
08:52:52 GetSingleValue result=40  Value=cccccccc
08:52:52 SkyScan query
08:52:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:52:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:52:53 Parameters OK
08:52:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:52:53 Set A/D data flow result=40
08:52:53 Set A/D channel type result=40
08:52:53 Set A/D encoding result=40
08:52:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:52:53 Set channel filter=0.000000e+000  result=40
08:52:53 Config A/D  Result=40
08:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:52:53 Get A/D filter: -9.255963e+061  result=40
08:52:53 Get A/D value=-858993460  result=40
08:52:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:52:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:52:53 Parameters OK
08:52:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:52:53 Set A/D data flow result=40
08:52:53 Set A/D channel type result=40
08:52:53 Set A/D encoding result=40
08:52:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:52:53 Set channel filter=0.000000e+000  result=40
08:52:53 Config A/D  Result=40
08:52:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:52:53 Get A/D filter: -9.255963e+061  result=40
08:52:53 Get A/D value=-858993460  result=40
08:52:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:52:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:52:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:52:53 Aux=
08:52:53 Message to Camera, serial 350734 queued
08:53:30 Received message from Master: op=PointingHead serial=350747
08:53:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:53:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:53:30 Point started: ret=0
08:53:30 point_skyscan result=0
08:53:31 Check angles
08:53:31 SkyScan query
08:53:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:53:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:53:31 Message to Master queued w/err=0: serial=350747 error=0
08:53:36 Received message from Master: op=Filter serial=350748
08:53:36 Color wheel filter change from 0 to 0
08:53:36 FLIGetFilterPos err=0  currentPosition=0
08:53:36 FLIGetStepsRemaining err=0  RemainingSteps=0
08:53:36 Filter is already there-color wheel unchanged
08:53:36 Received message from Master: op=Shutter serial=350749
08:53:36 Shutter LASER close
08:53:36 Received message from Camera: op=State serial=350751
08:53:36 GetSingleValue result=40  Value=cccccccc
08:53:36 SkyScan query
08:53:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:53:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:53:37 Parameters OK
08:53:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:53:37 Set A/D data flow result=40
08:53:37 Set A/D channel type result=40
08:53:37 Set A/D encoding result=40
08:53:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:53:37 Set channel filter=0.000000e+000  result=40
08:53:37 Config A/D  Result=40
08:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:53:37 Get A/D filter: -9.255963e+061  result=40
08:53:37 Get A/D value=-858993460  result=40
08:53:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:53:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:53:37 Parameters OK
08:53:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:53:37 Set A/D data flow result=40
08:53:37 Set A/D channel type result=40
08:53:37 Set A/D encoding result=40
08:53:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:53:37 Set channel filter=0.000000e+000  result=40
08:53:37 Config A/D  Result=40
08:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:53:37 Get A/D filter: -9.255963e+061  result=40
08:53:37 Get A/D value=-858993460  result=40
08:53:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:53:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:53:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:53:37 Aux=
08:53:37 Message to Camera, serial 350751 queued
08:54:14 Received message from Master: op=PointingHead serial=350764
08:54:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:54:14 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:54:14 Point started: ret=0
08:54:14 point_skyscan result=0
08:54:15 Check angles
08:54:15 SkyScan query
08:54:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
08:54:16 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
08:54:16 Check angles
08:54:16 SkyScan query
08:54:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.43<-14962  Statuses=0008 0009
[UTC 2019-3-19  08:54:16]
08:54:16 Msec=750  True Az=112.995  Ze=-44.43  Az status=0008  Ze status=0009
08:54:17 Check angles
08:54:17 SkyScan query
08:54:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.385<-16359  Statuses=0008 0009
08:54:17 Msec=1500  True Az=112.995  Ze=-65.385  Az status=0008  Ze status=0009
08:54:17 Check angles
08:54:17 SkyScan query
08:54:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.34<-17756  Statuses=0008 0009
08:54:18 Msec=2250  True Az=112.995  Ze=-86.34  Az status=0008  Ze status=0009
08:54:18 Check angles
08:54:18 SkyScan query
08:54:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.28<-19152  Statuses=0008 0009
08:54:19 Msec=3000  True Az=112.995  Ze=-107.28  Az status=0008  Ze status=0009
08:54:19 Check angles
08:54:19 SkyScan query
08:54:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.235<-20549  Statuses=0008 0009
08:54:19 Msec=3750  True Az=112.995  Ze=-128.235  Az status=0008  Ze status=0009
08:54:20 Check angles
08:54:20 SkyScan query
08:54:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.205<-21947  Statuses=0008 0009
08:54:20 Msec=4500  True Az=112.995  Ze=-149.205  Az status=0008  Ze status=0009
08:54:20 Check angles
08:54:20 SkyScan query
08:54:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.145<-23343  Statuses=0008 0009
08:54:21 Msec=5250  True Az=112.995  Ze=-170.145  Az status=0008  Ze status=0009
08:54:21 Check angles
08:54:21 SkyScan query
08:54:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:54:22 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:54:22 Message to Master queued w/err=0: serial=350764 error=0
08:54:27 Received message from Master: op=Filter serial=350765
08:54:27 Color wheel filter change from 0 to 0
08:54:27 FLIGetFilterPos err=0  currentPosition=0
08:54:27 FLIGetStepsRemaining err=0  RemainingSteps=0
08:54:27 Filter is already there-color wheel unchanged
08:54:27 Received message from Master: op=Shutter serial=350766
08:54:27 Shutter LASER open
08:54:27 Received message from Camera: op=State serial=350768
08:54:27 GetSingleValue result=40  Value=cccccccc
08:54:27 SkyScan query
08:54:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:54:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:28 Parameters OK
08:54:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:28 Set A/D data flow result=40
08:54:28 Set A/D channel type result=40
08:54:28 Set A/D encoding result=40
08:54:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:28 Set channel filter=0.000000e+000  result=40
08:54:28 Config A/D  Result=40
08:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:28 Get A/D filter: -9.255963e+061  result=40
08:54:28 Get A/D value=-858993460  result=40
08:54:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:28 Parameters OK
08:54:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:28 Set A/D data flow result=40
08:54:28 Set A/D channel type result=40
08:54:28 Set A/D encoding result=40
08:54:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:28 Set channel filter=0.000000e+000  result=40
08:54:28 Config A/D  Result=40
08:54:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:28 Get A/D filter: -9.255963e+061  result=40
08:54:28 Get A/D value=-858993460  result=40
08:54:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:54:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:54:28 Aux=
08:54:28 Message to Camera, serial 350768 queued
08:54:36 Received message from Master: op=Shutter serial=350778
08:54:36 Shutter LASER close
08:54:37 Received message from Master: op=PointingHead serial=350782
08:54:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:54:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:54:37 Point started: ret=0
08:54:37 point_skyscan result=0
08:54:38 Check angles
08:54:38 SkyScan query
08:54:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
08:54:38 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
08:54:38 Check angles
08:54:38 SkyScan query
08:54:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.28<-20152  Statuses=0008 0009
08:54:39 Msec=750  True Az=112.995  Ze=-122.28  Az status=0008  Ze status=0009
08:54:39 Check angles
08:54:39 SkyScan query
08:54:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.34<-18756  Statuses=0008 0009
08:54:40 Msec=1500  True Az=112.995  Ze=-101.34  Az status=0008  Ze status=0009
08:54:40 Check angles
08:54:40 SkyScan query
08:54:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.355<-17357  Statuses=0008 0009
08:54:40 Msec=2250  True Az=112.995  Ze=-80.355  Az status=0008  Ze status=0009
08:54:41 Check angles
08:54:41 SkyScan query
08:54:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.415<-15961  Statuses=0008 0009
08:54:41 Msec=3000  True Az=112.995  Ze=-59.415  Az status=0008  Ze status=0009
08:54:41 Check angles
08:54:41 SkyScan query
08:54:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.445<-14563  Statuses=0008 0009
08:54:42 Msec=3750  True Az=112.995  Ze=-38.445  Az status=0008  Ze status=0009
08:54:42 Check angles
08:54:42 SkyScan query
08:54:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.505<-13167  Statuses=0008 0009
08:54:43 Msec=4500  True Az=112.995  Ze=-17.505  Az status=0008  Ze status=0009
08:54:43 Check angles
08:54:43 SkyScan query
08:54:43 SkyScan query done: ret=0  az=112.995<-7533  ze=3.465<-11769  Statuses=0008 0009
08:54:43 Msec=5250  True Az=112.995  Ze=3.465  Az status=0008  Ze status=0009
08:54:44 Check angles
08:54:44 SkyScan query
08:54:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:54:44 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:54:44 Message to Master queued w/err=0: serial=350782 error=0
08:54:49 Received message from Master: op=Filter serial=350783
08:54:49 Color wheel filter change from 0 to 0
08:54:49 FLIGetFilterPos err=0  currentPosition=0
08:54:49 FLIGetStepsRemaining err=0  RemainingSteps=0
08:54:49 Filter is already there-color wheel unchanged
08:54:49 Received message from Master: op=Shutter serial=350784
08:54:49 Shutter LASER close
08:54:50 Received message from Camera: op=State serial=350786
08:54:50 GetSingleValue result=40  Value=cccccccc
08:54:50 SkyScan query
08:54:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:54:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:50 Parameters OK
08:54:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:50 Set A/D data flow result=40
08:54:50 Set A/D channel type result=40
08:54:50 Set A/D encoding result=40
08:54:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:50 Set channel filter=0.000000e+000  result=40
08:54:50 Config A/D  Result=40
08:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:50 Get A/D filter: -9.255963e+061  result=40
08:54:50 Get A/D value=-858993460  result=40
08:54:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:50 Parameters OK
08:54:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:50 Set A/D data flow result=40
08:54:50 Set A/D channel type result=40
08:54:50 Set A/D encoding result=40
08:54:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:50 Set channel filter=0.000000e+000  result=40
08:54:50 Config A/D  Result=40
08:54:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:50 Get A/D filter: -9.255963e+061  result=40
08:54:50 Get A/D value=-858993460  result=40
08:54:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:54:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:54:50 Aux=
08:54:50 Message to Camera, serial 350786 queued
08:55:27 Received message from Master: op=PointingHead serial=350799
08:55:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:55:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:55:27 Point started: ret=0
08:55:27 point_skyscan result=0
08:55:28 Check angles
08:55:28 SkyScan query
08:55:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:55:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:55:29 Message to Master queued w/err=0: serial=350799 error=0
08:55:34 Received message from Master: op=Filter serial=350800
08:55:34 Color wheel filter change from 0 to 0
08:55:34 FLIGetFilterPos err=0  currentPosition=0
08:55:34 FLIGetStepsRemaining err=0  RemainingSteps=0
08:55:34 Filter is already there-color wheel unchanged
08:55:34 Received message from Master: op=Shutter serial=350801
08:55:34 Shutter LASER close
08:55:34 Received message from Camera: op=State serial=350803
08:55:34 GetSingleValue result=40  Value=cccccccc
08:55:34 SkyScan query
08:55:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:55:34 Parameters OK
08:55:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:55:34 Set A/D data flow result=40
08:55:34 Set A/D channel type result=40
08:55:34 Set A/D encoding result=40
08:55:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:55:34 Set channel filter=0.000000e+000  result=40
08:55:34 Config A/D  Result=40
08:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:55:34 Get A/D filter: -9.255963e+061  result=40
08:55:34 Get A/D value=-858993460  result=40
08:55:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:55:34 Parameters OK
08:55:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:55:34 Set A/D data flow result=40
08:55:34 Set A/D channel type result=40
08:55:34 Set A/D encoding result=40
08:55:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:55:34 Set channel filter=0.000000e+000  result=40
08:55:34 Config A/D  Result=40
08:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:55:34 Get A/D filter: -9.255963e+061  result=40
08:55:34 Get A/D value=-858993460  result=40
08:55:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:55:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:55:34 Aux=
08:55:34 Message to Camera, serial 350803 queued
08:56:11 Received message from Master: op=PointingHead serial=350816
08:56:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:56:11 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:56:12 Point started: ret=0
08:56:12 point_skyscan result=0
08:56:12 Check angles
08:56:12 SkyScan query
08:56:13 SkyScan query done: ret=0  az=135.96<-9064  ze=-6.51<-12434  Statuses=0009 0008
08:56:13 Msec=0  True Az=135.96  Ze=-6.51  Az status=0009  Ze status=0008
08:56:13 Check angles
08:56:13 SkyScan query
08:56:14 SkyScan query done: ret=0  az=153.45<-10230  ze=-6.495<-12433  Statuses=0009 0008
08:56:14 Msec=750  True Az=153.45  Ze=-6.495  Az status=0009  Ze status=0008
08:56:14 Check angles
08:56:14 SkyScan query
08:56:14 SkyScan query done: ret=0  az=171<-11400  ze=-6.495<-12433  Statuses=0009 0008
08:56:14 Msec=1500  True Az=171  Ze=-6.495  Az status=0009  Ze status=0008
08:56:15 Check angles
08:56:15 SkyScan query
08:56:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:56:15 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:56:15 Message to Master queued w/err=0: serial=350816 error=0
08:56:20 Received message from Master: op=Filter serial=350817
08:56:20 Color wheel filter change from 0 to 0
08:56:20 FLIGetFilterPos err=0  currentPosition=0
08:56:20 FLIGetStepsRemaining err=0  RemainingSteps=0
08:56:20 Filter is already there-color wheel unchanged
08:56:20 Received message from Master: op=Shutter serial=350818
08:56:20 Shutter LASER close
08:56:20 Received message from Camera: op=State serial=350820
08:56:20 GetSingleValue result=40  Value=cccccccc
08:56:20 SkyScan query
08:56:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:56:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:56:21 Parameters OK
08:56:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:56:21 Set A/D data flow result=40
08:56:21 Set A/D channel type result=40
08:56:21 Set A/D encoding result=40
08:56:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:56:21 Set channel filter=0.000000e+000  result=40
08:56:21 Config A/D  Result=40
08:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:56:21 Get A/D filter: -9.255963e+061  result=40
08:56:21 Get A/D value=-858993460  result=40
08:56:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:56:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:56:21 Parameters OK
08:56:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:56:21 Set A/D data flow result=40
08:56:21 Set A/D channel type result=40
08:56:21 Set A/D encoding result=40
08:56:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:56:21 Set channel filter=0.000000e+000  result=40
08:56:21 Config A/D  Result=40
08:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:56:21 Get A/D filter: -9.255963e+061  result=40
08:56:21 Get A/D value=-858993460  result=40
08:56:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:56:21 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:56:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:56:21 Aux=
08:56:21 Message to Camera, serial 350820 queued
08:56:58 Received message from Master: op=PointingHead serial=350833
08:56:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:56:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:56:58 Point started: ret=0
08:56:58 point_skyscan result=0
08:56:59 Check angles
08:56:59 SkyScan query
08:57:00 SkyScan query done: ret=0  az=152.61<-10174  ze=6.51<-11566  Statuses=0009 0008
08:57:00 Msec=0  True Az=152.61  Ze=6.51  Az status=0009  Ze status=0008
08:57:00 Check angles
08:57:00 SkyScan query
08:57:00 SkyScan query done: ret=0  az=135.105<-9007  ze=6.495<-11567  Statuses=0009 0008
08:57:00 Msec=750  True Az=135.105  Ze=6.495  Az status=0009  Ze status=0008
08:57:00 Check angles
08:57:00 SkyScan query
08:57:01 SkyScan query done: ret=0  az=117.225<-7815  ze=6.495<-11567  Statuses=0009 0008
08:57:01 Msec=1500  True Az=117.225  Ze=6.495  Az status=0009  Ze status=0008
08:57:01 Check angles
08:57:01 SkyScan query
08:57:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:57:02 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:57:02 Message to Master queued w/err=0: serial=350833 error=0
08:57:07 Received message from Master: op=Filter serial=350834
08:57:07 Color wheel filter change from 0 to 0
08:57:07 FLIGetFilterPos err=0  currentPosition=0
08:57:07 FLIGetStepsRemaining err=0  RemainingSteps=0
08:57:07 Filter is already there-color wheel unchanged
08:57:07 Received message from Master: op=Shutter serial=350835
08:57:07 Shutter LASER close
08:57:07 Received message from Camera: op=State serial=350837
08:57:07 GetSingleValue result=40  Value=cccccccc
08:57:07 SkyScan query
08:57:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:57:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:08 Parameters OK
08:57:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:08 Set A/D data flow result=40
08:57:08 Set A/D channel type result=40
08:57:08 Set A/D encoding result=40
08:57:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:08 Set channel filter=0.000000e+000  result=40
08:57:08 Config A/D  Result=40
08:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:08 Get A/D filter: -9.255963e+061  result=40
08:57:08 Get A/D value=-858993460  result=40
08:57:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:08 Parameters OK
08:57:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:08 Set A/D data flow result=40
08:57:08 Set A/D channel type result=40
08:57:08 Set A/D encoding result=40
08:57:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:08 Set channel filter=0.000000e+000  result=40
08:57:08 Config A/D  Result=40
08:57:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:08 Get A/D filter: -9.255963e+061  result=40
08:57:08 Get A/D value=-858993460  result=40
08:57:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:57:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:57:08 Aux=
08:57:08 Message to Camera, serial 350837 queued
08:57:44 Received message from Master: op=PointingHead serial=350850
08:57:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:57:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:57:45 Point started: ret=0
08:57:45 point_skyscan result=0
08:57:45 Check angles
08:57:45 SkyScan query
08:57:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
08:57:46 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
08:57:46 Check angles
08:57:46 SkyScan query
08:57:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.295<-14953  Statuses=0008 0009
08:57:47 Msec=750  True Az=112.995  Ze=-44.295  Az status=0008  Ze status=0009
08:57:47 Check angles
08:57:47 SkyScan query
08:57:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.7<-16380  Statuses=0008 0009
08:57:48 Msec=1500  True Az=112.995  Ze=-65.7  Az status=0008  Ze status=0009
08:57:48 Check angles
08:57:48 SkyScan query
08:57:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.64<-17776  Statuses=0008 0009
08:57:48 Msec=2250  True Az=112.995  Ze=-86.64  Az status=0008  Ze status=0009
08:57:49 Check angles
08:57:49 SkyScan query
08:57:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.595<-19173  Statuses=0008 0009
08:57:49 Msec=3000  True Az=112.995  Ze=-107.595  Az status=0008  Ze status=0009
08:57:49 Check angles
08:57:49 SkyScan query
08:57:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.94<-20596  Statuses=0008 0009
08:57:50 Msec=3750  True Az=112.995  Ze=-128.94  Az status=0008  Ze status=0009
08:57:50 Check angles
08:57:50 SkyScan query
08:57:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.925<-21995  Statuses=0008 0009
08:57:51 Msec=4500  True Az=112.995  Ze=-149.925  Az status=0008  Ze status=0009
08:57:51 Check angles
08:57:51 SkyScan query
08:57:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.135<-23409  Statuses=0008 0009
08:57:51 Msec=5250  True Az=112.995  Ze=-171.135  Az status=0008  Ze status=0009
08:57:52 Check angles
08:57:52 SkyScan query
08:57:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:57:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:57:52 Message to Master queued w/err=0: serial=350850 error=0
08:57:57 Received message from Master: op=Filter serial=350851
08:57:57 Color wheel filter change from 0 to 0
08:57:57 FLIGetFilterPos err=0  currentPosition=0
08:57:57 FLIGetStepsRemaining err=0  RemainingSteps=0
08:57:57 Filter is already there-color wheel unchanged
08:57:57 Received message from Master: op=Shutter serial=350852
08:57:57 Shutter LASER open
08:57:57 Received message from Camera: op=State serial=350854
08:57:57 GetSingleValue result=40  Value=cccccccc
08:57:57 SkyScan query
08:57:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:57:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:58 Parameters OK
08:57:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:58 Set A/D data flow result=40
08:57:58 Set A/D channel type result=40
08:57:58 Set A/D encoding result=40
08:57:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:58 Set channel filter=0.000000e+000  result=40
08:57:58 Config A/D  Result=40
08:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:58 Get A/D filter: -9.255963e+061  result=40
08:57:58 Get A/D value=-858993460  result=40
08:57:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:58 Parameters OK
08:57:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:58 Set A/D data flow result=40
08:57:58 Set A/D channel type result=40
08:57:58 Set A/D encoding result=40
08:57:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:58 Set channel filter=0.000000e+000  result=40
08:57:58 Config A/D  Result=40
08:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:58 Get A/D filter: -9.255963e+061  result=40
08:57:58 Get A/D value=-858993460  result=40
08:57:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:57:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:57:58 Aux=
08:57:58 Message to Camera, serial 350854 queued
08:58:06 Received message from Master: op=Shutter serial=350864
08:58:06 Shutter LASER close
08:58:07 Received message from Master: op=PointingHead serial=350868
08:58:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:58:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:58:07 Point started: ret=0
08:58:07 point_skyscan result=0
08:58:08 Check angles
08:58:08 SkyScan query
08:58:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.535<-21569  Statuses=0008 0009
08:58:09 Msec=0  True Az=112.995  Ze=-143.535  Az status=0008  Ze status=0009
08:58:09 Check angles
08:58:09 SkyScan query
08:58:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.595<-20173  Statuses=0008 0009
08:58:09 Msec=750  True Az=112.995  Ze=-122.595  Az status=0008  Ze status=0009
08:58:10 Check angles
08:58:10 SkyScan query
08:58:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.19<-18746  Statuses=0008 0009
08:58:10 Msec=1500  True Az=112.995  Ze=-101.19  Az status=0008  Ze status=0009
08:58:10 Check angles
08:58:10 SkyScan query
08:58:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.22<-17348  Statuses=0008 0009
08:58:11 Msec=2250  True Az=112.995  Ze=-80.22  Az status=0008  Ze status=0009
08:58:11 Check angles
08:58:11 SkyScan query
08:58:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.845<-15923  Statuses=0008 0009
08:58:12 Msec=3000  True Az=112.995  Ze=-58.845  Az status=0008  Ze status=0009
08:58:12 Check angles
08:58:12 SkyScan query
08:58:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.86<-14524  Statuses=0008 0009
08:58:12 Msec=3750  True Az=112.995  Ze=-37.86  Az status=0008  Ze status=0009
08:58:13 Check angles
08:58:13 SkyScan query
08:58:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.92<-13128  Statuses=0008 0009
08:58:13 Msec=4500  True Az=112.995  Ze=-16.92  Az status=0008  Ze status=0009
08:58:13 Check angles
08:58:13 SkyScan query
08:58:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.395<-11707  Statuses=0008 0009
08:58:14 Msec=5250  True Az=112.995  Ze=4.395  Az status=0008  Ze status=0009
08:58:14 Check angles
08:58:14 SkyScan query
08:58:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:58:15 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:58:15 Message to Master queued w/err=0: serial=350868 error=0
08:58:20 Received message from Master: op=Filter serial=350869
08:58:20 Color wheel filter change from 0 to 0
08:58:20 FLIGetFilterPos err=0  currentPosition=0
08:58:20 FLIGetStepsRemaining err=0  RemainingSteps=0
08:58:20 Filter is already there-color wheel unchanged
08:58:20 Received message from Master: op=Shutter serial=350870
08:58:20 Shutter LASER close
08:58:20 Received message from Camera: op=State serial=350872
08:58:20 GetSingleValue result=40  Value=cccccccc
08:58:20 SkyScan query
08:58:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:58:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:58:21 Parameters OK
08:58:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:58:21 Set A/D data flow result=40
08:58:21 Set A/D channel type result=40
08:58:21 Set A/D encoding result=40
08:58:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:58:21 Set channel filter=0.000000e+000  result=40
08:58:21 Config A/D  Result=40
08:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:58:21 Get A/D filter: -9.255963e+061  result=40
08:58:21 Get A/D value=-858993460  result=40
08:58:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:58:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:58:21 Parameters OK
08:58:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:58:21 Set A/D data flow result=40
08:58:21 Set A/D channel type result=40
08:58:21 Set A/D encoding result=40
08:58:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:58:21 Set channel filter=0.000000e+000  result=40
08:58:21 Config A/D  Result=40
08:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:58:21 Get A/D filter: -9.255963e+061  result=40
08:58:21 Get A/D value=-858993460  result=40
08:58:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:58:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:58:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:58:21 Aux=
08:58:21 Message to Camera, serial 350872 queued
08:58:57 Received message from Master: op=PointingHead serial=350885
08:58:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:58:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:58:58 Point started: ret=0
08:58:58 point_skyscan result=0
08:58:59 Check angles
08:58:59 SkyScan query
08:58:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:58:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:58:59 Message to Master queued w/err=0: serial=350885 error=0
08:59:04 Received message from Master: op=Filter serial=350886
08:59:04 Color wheel filter change from 0 to 0
08:59:04 FLIGetFilterPos err=0  currentPosition=0
08:59:04 FLIGetStepsRemaining err=0  RemainingSteps=0
08:59:04 Filter is already there-color wheel unchanged
08:59:04 Received message from Master: op=Shutter serial=350887
08:59:04 Shutter LASER close
08:59:04 Received message from Camera: op=State serial=350889
08:59:04 GetSingleValue result=40  Value=cccccccc
08:59:04 SkyScan query
08:59:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:59:05 Parameters OK
08:59:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:59:05 Set A/D data flow result=40
08:59:05 Set A/D channel type result=40
08:59:05 Set A/D encoding result=40
08:59:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:59:05 Set channel filter=0.000000e+000  result=40
08:59:05 Config A/D  Result=40
08:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:59:05 Get A/D filter: -9.255963e+061  result=40
08:59:05 Get A/D value=-858993460  result=40
08:59:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:59:05 Parameters OK
08:59:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:59:05 Set A/D data flow result=40
08:59:05 Set A/D channel type result=40
08:59:05 Set A/D encoding result=40
08:59:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:59:05 Set channel filter=0.000000e+000  result=40
08:59:05 Config A/D  Result=40
08:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:59:05 Get A/D filter: -9.255963e+061  result=40
08:59:05 Get A/D value=-858993460  result=40
08:59:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:59:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:59:05 Aux=
08:59:05 Message to Camera, serial 350889 queued
08:59:42 Received message from Master: op=PointingHead serial=350902
08:59:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:59:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:59:42 Point started: ret=0
08:59:42 point_skyscan result=0
08:59:43 Check angles
08:59:43 SkyScan query
08:59:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:59:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:59:43 Message to Master queued w/err=0: serial=350902 error=0
08:59:48 Received message from Master: op=Filter serial=350903
08:59:48 Color wheel filter change from 0 to 0
08:59:48 FLIGetFilterPos err=0  currentPosition=0
08:59:48 FLIGetStepsRemaining err=0  RemainingSteps=0
08:59:48 Filter is already there-color wheel unchanged
08:59:49 Received message from Master: op=Shutter serial=350904
08:59:49 Shutter LASER close
08:59:49 Received message from Camera: op=State serial=350906
08:59:49 GetSingleValue result=40  Value=cccccccc
08:59:49 SkyScan query
08:59:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:59:49 Parameters OK
08:59:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:59:49 Set A/D data flow result=40
08:59:49 Set A/D channel type result=40
08:59:49 Set A/D encoding result=40
08:59:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:59:49 Set channel filter=0.000000e+000  result=40
08:59:49 Config A/D  Result=40
08:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:59:49 Get A/D filter: -9.255963e+061  result=40
08:59:49 Get A/D value=-858993460  result=40
08:59:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:59:49 Parameters OK
08:59:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:59:49 Set A/D data flow result=40
08:59:49 Set A/D channel type result=40
08:59:49 Set A/D encoding result=40
08:59:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:59:49 Set channel filter=0.000000e+000  result=40
08:59:49 Config A/D  Result=40
08:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:59:49 Get A/D filter: -9.255963e+061  result=40
08:59:49 Get A/D value=-858993460  result=40
08:59:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:59:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:59:49 Aux=
08:59:49 Message to Camera, serial 350906 queued
09:00:26 Received message from Master: op=PointingHead serial=350919
09:00:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:00:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:00:26 Point started: ret=0
09:00:26 point_skyscan result=0
09:00:27 Check angles
09:00:27 SkyScan query
09:00:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:00:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:00:28 Message to Master queued w/err=0: serial=350919 error=0
09:00:33 Received message from Master: op=Filter serial=350920
09:00:33 Color wheel filter change from 0 to 0
09:00:33 FLIGetFilterPos err=0  currentPosition=0
09:00:33 FLIGetStepsRemaining err=0  RemainingSteps=0
09:00:33 Filter is already there-color wheel unchanged
09:00:33 Received message from Master: op=Shutter serial=350921
09:00:33 Shutter LASER close
09:00:33 Received message from Camera: op=State serial=350923
09:00:33 GetSingleValue result=40  Value=cccccccc
09:00:33 SkyScan query
09:00:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:00:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:00:33 Parameters OK
09:00:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:00:33 Set A/D data flow result=40
09:00:33 Set A/D channel type result=40
09:00:33 Set A/D encoding result=40
09:00:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:00:33 Set channel filter=0.000000e+000  result=40
09:00:33 Config A/D  Result=40
09:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:00:33 Get A/D filter: -9.255963e+061  result=40
09:00:33 Get A/D value=-858993460  result=40
09:00:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:00:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:00:33 Parameters OK
09:00:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:00:33 Set A/D data flow result=40
09:00:33 Set A/D channel type result=40
09:00:33 Set A/D encoding result=40
09:00:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:00:33 Set channel filter=0.000000e+000  result=40
09:00:33 Config A/D  Result=40
09:00:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:00:33 Get A/D filter: -9.255963e+061  result=40
09:00:33 Get A/D value=-858993460  result=40
09:00:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:00:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:00:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:00:33 Aux=
09:00:33 Message to Camera, serial 350923 queued
09:01:10 Received message from Master: op=PointingHead serial=350936
09:01:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:01:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:01:11 Point started: ret=0
09:01:11 point_skyscan result=0
09:01:11 Check angles
09:01:11 SkyScan query
09:01:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.64<-13576  Statuses=0008 0009
09:01:12 Msec=0  True Az=112.995  Ze=-23.64  Az status=0008  Ze status=0009
09:01:12 Check angles
09:01:12 SkyScan query
09:01:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
09:01:13 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
09:01:13 Check angles
09:01:13 SkyScan query
09:01:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.535<-16369  Statuses=0008 0009
09:01:13 Msec=1500  True Az=112.995  Ze=-65.535  Az status=0008  Ze status=0009
09:01:14 Check angles
09:01:14 SkyScan query
09:01:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.505<-17767  Statuses=0008 0009
09:01:14 Msec=2250  True Az=112.995  Ze=-86.505  Az status=0008  Ze status=0009
09:01:14 Check angles
09:01:14 SkyScan query
09:01:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.46<-19164  Statuses=0008 0009
09:01:15 Msec=3000  True Az=112.995  Ze=-107.46  Az status=0008  Ze status=0009
09:01:15 Check angles
09:01:15 SkyScan query
09:01:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.4<-20560  Statuses=0008 0009
09:01:16 Msec=3750  True Az=112.995  Ze=-128.4  Az status=0008  Ze status=0009
09:01:16 Check angles
09:01:16 SkyScan query
09:01:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.355<-21957  Statuses=0008 0009
09:01:16 Msec=4500  True Az=112.995  Ze=-149.355  Az status=0008  Ze status=0009
09:01:17 Check angles
09:01:17 SkyScan query
09:01:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.295<-23353  Statuses=0008 0009
09:01:17 Msec=5250  True Az=112.995  Ze=-170.295  Az status=0008  Ze status=0009
09:01:17 Check angles
09:01:17 SkyScan query
09:01:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:01:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:01:18 Message to Master queued w/err=0: serial=350936 error=0
09:01:23 Received message from Master: op=Filter serial=350937
09:01:23 Color wheel filter change from 0 to 0
09:01:23 FLIGetFilterPos err=0  currentPosition=0
09:01:23 FLIGetStepsRemaining err=0  RemainingSteps=0
09:01:23 Filter is already there-color wheel unchanged
09:01:23 Received message from Master: op=Shutter serial=350938
09:01:23 Shutter LASER open
09:01:23 Received message from Camera: op=State serial=350940
09:01:23 GetSingleValue result=40  Value=cccccccc
09:01:23 SkyScan query
09:01:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:01:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:01:24 Parameters OK
09:01:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:01:24 Set A/D data flow result=40
09:01:24 Set A/D channel type result=40
09:01:24 Set A/D encoding result=40
09:01:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:01:24 Set channel filter=0.000000e+000  result=40
09:01:24 Config A/D  Result=40
09:01:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:01:24 Get A/D filter: -9.255963e+061  result=40
09:01:24 Get A/D value=-858993460  result=40
09:01:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:01:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:01:24 Parameters OK
09:01:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:01:24 Set A/D data flow result=40
09:01:24 Set A/D channel type result=40
09:01:24 Set A/D encoding result=40
09:01:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:01:24 Set channel filter=0.000000e+000  result=40
09:01:24 Config A/D  Result=40
09:01:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:01:24 Get A/D filter: -9.255963e+061  result=40
09:01:24 Get A/D value=-858993460  result=40
09:01:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:01:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:01:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:01:24 Aux=
09:01:24 Message to Camera, serial 350940 queued
09:01:32 Received message from Master: op=Shutter serial=350950
09:01:32 Shutter LASER close
09:01:33 Received message from Master: op=PointingHead serial=350954
09:01:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:01:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:01:33 Point started: ret=0
09:01:33 point_skyscan result=0
09:01:34 Check angles
09:01:34 SkyScan query
09:01:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
09:01:35 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
09:01:35 Check angles
09:01:35 SkyScan query
09:01:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
09:01:35 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
09:01:36 Check angles
09:01:36 SkyScan query
09:01:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.35<-18690  Statuses=0008 0009
09:01:36 Msec=1500  True Az=112.995  Ze=-100.35  Az status=0008  Ze status=0009
09:01:36 Check angles
09:01:36 SkyScan query
09:01:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.38<-17292  Statuses=0008 0009
09:01:37 Msec=2250  True Az=112.995  Ze=-79.38  Az status=0008  Ze status=0009
09:01:37 Check angles
09:01:37 SkyScan query
09:01:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.41<-15894  Statuses=0008 0009
09:01:38 Msec=3000  True Az=112.995  Ze=-58.41  Az status=0008  Ze status=0009
09:01:38 Check angles
09:01:38 SkyScan query
09:01:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.485<-14499  Statuses=0008 0009
09:01:38 Msec=3750  True Az=112.995  Ze=-37.485  Az status=0008  Ze status=0009
09:01:39 Check angles
09:01:39 SkyScan query
09:01:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.5<-13100  Statuses=0008 0009
09:01:39 Msec=4500  True Az=112.995  Ze=-16.5  Az status=0008  Ze status=0009
09:01:39 Check angles
09:01:39 SkyScan query
09:01:40 SkyScan query done: ret=0  az=112.995<-7533  ze=4.365<-11709  Statuses=0008 0009
09:01:40 Msec=5250  True Az=112.995  Ze=4.365  Az status=0008  Ze status=0009
09:01:40 Check angles
09:01:40 SkyScan query
09:01:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:01:41 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:01:41 Message to Master queued w/err=0: serial=350954 error=0
09:01:46 Received message from Master: op=Filter serial=350955
09:01:46 Color wheel filter change from 0 to 0
09:01:46 FLIGetFilterPos err=0  currentPosition=0
09:01:46 FLIGetStepsRemaining err=0  RemainingSteps=0
09:01:46 Filter is already there-color wheel unchanged
09:01:46 Received message from Master: op=Shutter serial=350956
09:01:46 Shutter LASER close
09:01:46 Received message from Camera: op=State serial=350958
09:01:46 GetSingleValue result=40  Value=cccccccc
09:01:46 SkyScan query
09:01:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:01:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:01:47 Parameters OK
09:01:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:01:47 Set A/D data flow result=40
09:01:47 Set A/D channel type result=40
09:01:47 Set A/D encoding result=40
09:01:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:01:47 Set channel filter=0.000000e+000  result=40
09:01:47 Config A/D  Result=40
09:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:01:47 Get A/D filter: -9.255963e+061  result=40
09:01:47 Get A/D value=-858993460  result=40
09:01:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:01:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:01:47 Parameters OK
09:01:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:01:47 Set A/D data flow result=40
09:01:47 Set A/D channel type result=40
09:01:47 Set A/D encoding result=40
09:01:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:01:47 Set channel filter=0.000000e+000  result=40
09:01:47 Config A/D  Result=40
09:01:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:01:47 Get A/D filter: -9.255963e+061  result=40
09:01:47 Get A/D value=-858993460  result=40
09:01:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:01:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:01:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:01:47 Aux=
09:01:47 Message to Camera, serial 350958 queued
09:02:23 Received message from Master: op=PointingHead serial=350971
09:02:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:02:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:02:24 Point started: ret=0
09:02:24 point_skyscan result=0
09:02:25 Check angles
09:02:25 SkyScan query
09:02:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:02:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:02:25 Message to Master queued w/err=0: serial=350971 error=0
09:02:30 Received message from Master: op=Filter serial=350972
09:02:30 Color wheel filter change from 0 to 0
09:02:30 FLIGetFilterPos err=0  currentPosition=0
09:02:30 FLIGetStepsRemaining err=0  RemainingSteps=0
09:02:30 Filter is already there-color wheel unchanged
09:02:30 Received message from Master: op=Shutter serial=350973
09:02:30 Shutter LASER close
09:02:30 Received message from Camera: op=State serial=350975
09:02:30 GetSingleValue result=40  Value=cccccccc
09:02:30 SkyScan query
09:02:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:02:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:02:31 Parameters OK
09:02:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:02:31 Set A/D data flow result=40
09:02:31 Set A/D channel type result=40
09:02:31 Set A/D encoding result=40
09:02:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:02:31 Set channel filter=0.000000e+000  result=40
09:02:31 Config A/D  Result=40
09:02:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:02:31 Get A/D filter: -9.255963e+061  result=40
09:02:31 Get A/D value=-858993460  result=40
09:02:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:02:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:02:31 Parameters OK
09:02:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:02:31 Set A/D data flow result=40
09:02:31 Set A/D channel type result=40
09:02:31 Set A/D encoding result=40
09:02:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:02:31 Set channel filter=0.000000e+000  result=40
09:02:31 Config A/D  Result=40
09:02:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:02:31 Get A/D filter: -9.255963e+061  result=40
09:02:31 Get A/D value=-858993460  result=40
09:02:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:02:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:02:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:02:31 Aux=
09:02:31 Message to Camera, serial 350975 queued
09:03:08 Received message from Master: op=PointingHead serial=350988
09:03:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:03:08 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:03:08 Point started: ret=0
09:03:08 point_skyscan result=0
09:03:09 Check angles
09:03:09 SkyScan query
09:03:09 SkyScan query done: ret=0  az=136.17<-9078  ze=-6.51<-12434  Statuses=0009 0008
09:03:09 Msec=0  True Az=136.17  Ze=-6.51  Az status=0009  Ze status=0008
09:03:10 Check angles
09:03:10 SkyScan query
09:03:10 SkyScan query done: ret=0  az=153.66<-10244  ze=-6.495<-12433  Statuses=0009 0008
09:03:10 Msec=750  True Az=153.66  Ze=-6.495  Az status=0009  Ze status=0008
09:03:10 Check angles
09:03:10 SkyScan query
09:03:11 SkyScan query done: ret=0  az=171.09<-11406  ze=-6.495<-12433  Statuses=0009 0008
09:03:11 Msec=1500  True Az=171.09  Ze=-6.495  Az status=0009  Ze status=0008
09:03:11 Check angles
09:03:11 SkyScan query
09:03:12 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:03:12 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:03:12 Message to Master queued w/err=0: serial=350988 error=0
09:03:17 Received message from Master: op=Filter serial=350989
09:03:17 Color wheel filter change from 0 to 0
09:03:17 FLIGetFilterPos err=0  currentPosition=0
09:03:17 FLIGetStepsRemaining err=0  RemainingSteps=0
09:03:17 Filter is already there-color wheel unchanged
09:03:17 Received message from Master: op=Shutter serial=350990
09:03:17 Shutter LASER close
09:03:17 Received message from Camera: op=State serial=350992
09:03:17 GetSingleValue result=40  Value=cccccccc
09:03:17 SkyScan query
09:03:18 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:03:18 Parameters OK
09:03:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:03:18 Set A/D data flow result=40
09:03:18 Set A/D channel type result=40
09:03:18 Set A/D encoding result=40
09:03:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:03:18 Set channel filter=0.000000e+000  result=40
09:03:18 Config A/D  Result=40
09:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:03:18 Get A/D filter: -9.255963e+061  result=40
09:03:18 Get A/D value=-858993460  result=40
09:03:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:03:18 Parameters OK
09:03:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:03:18 Set A/D data flow result=40
09:03:18 Set A/D channel type result=40
09:03:18 Set A/D encoding result=40
09:03:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:03:18 Set channel filter=0.000000e+000  result=40
09:03:18 Config A/D  Result=40
09:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:03:18 Get A/D filter: -9.255963e+061  result=40
09:03:18 Get A/D value=-858993460  result=40
09:03:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:03:18 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:03:18 Aux=
09:03:18 Message to Camera, serial 350992 queued
09:03:35 Received message from Master: op=Identify serial=350993
[UTC 2019-3-19  09:03:48]
09:03:54 Received message from Master: op=PointingHead serial=351008
09:03:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:03:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:03:55 Point started: ret=0
09:03:55 point_skyscan result=0
09:03:55 Check angles
09:03:55 SkyScan query
09:03:56 SkyScan query done: ret=0  az=152.91<-10194  ze=6.51<-11566  Statuses=0009 0008
09:03:56 Msec=0  True Az=152.91  Ze=6.51  Az status=0009  Ze status=0008
09:03:56 Check angles
09:03:56 SkyScan query
09:03:57 SkyScan query done: ret=0  az=135.255<-9017  ze=6.495<-11567  Statuses=0009 0008
09:03:57 Msec=750  True Az=135.255  Ze=6.495  Az status=0009  Ze status=0008
09:03:57 Check angles
09:03:57 SkyScan query
09:03:58 SkyScan query done: ret=0  az=117.78<-7852  ze=6.495<-11567  Statuses=0009 0008
09:03:58 Msec=1500  True Az=117.78  Ze=6.495  Az status=0009  Ze status=0008
09:03:58 Check angles
09:03:58 SkyScan query
09:03:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:03:58 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:03:58 Message to Master queued w/err=0: serial=351008 error=0
09:04:03 Received message from Master: op=Filter serial=351009
09:04:03 Color wheel filter change from 0 to 0
09:04:03 FLIGetFilterPos err=0  currentPosition=0
09:04:03 FLIGetStepsRemaining err=0  RemainingSteps=0
09:04:03 Filter is already there-color wheel unchanged
09:04:03 Received message from Master: op=Shutter serial=351010
09:04:03 Shutter LASER close
09:04:04 Received message from Camera: op=State serial=351012
09:04:04 GetSingleValue result=40  Value=cccccccc
09:04:04 SkyScan query
09:04:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:04:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:04 Parameters OK
09:04:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:04 Set A/D data flow result=40
09:04:04 Set A/D channel type result=40
09:04:04 Set A/D encoding result=40
09:04:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:04 Set channel filter=0.000000e+000  result=40
09:04:04 Config A/D  Result=40
09:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:04 Get A/D filter: -9.255963e+061  result=40
09:04:04 Get A/D value=-858993460  result=40
09:04:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:04 Parameters OK
09:04:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:04 Set A/D data flow result=40
09:04:04 Set A/D channel type result=40
09:04:04 Set A/D encoding result=40
09:04:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:04 Set channel filter=0.000000e+000  result=40
09:04:04 Config A/D  Result=40
09:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:04 Get A/D filter: -9.255963e+061  result=40
09:04:04 Get A/D value=-858993460  result=40
09:04:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:04:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:04:04 Aux=
09:04:04 Message to Camera, serial 351012 queued
09:04:41 Received message from Master: op=PointingHead serial=351025
09:04:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:04:41 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:04:41 Point started: ret=0
09:04:41 point_skyscan result=0
09:04:42 Check angles
09:04:42 SkyScan query
09:04:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.835<-13589  Statuses=0008 0009
09:04:43 Msec=0  True Az=112.995  Ze=-23.835  Az status=0008  Ze status=0009
09:04:43 Check angles
09:04:43 SkyScan query
09:04:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
09:04:43 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
09:04:44 Check angles
09:04:44 SkyScan query
09:04:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.715<-16381  Statuses=0008 0009
09:04:44 Msec=1500  True Az=112.995  Ze=-65.715  Az status=0008  Ze status=0009
09:04:44 Check angles
09:04:44 SkyScan query
09:04:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.67<-17778  Statuses=0008 0009
09:04:45 Msec=2250  True Az=112.995  Ze=-86.67  Az status=0008  Ze status=0009
09:04:45 Check angles
09:04:45 SkyScan query
09:04:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.61<-19174  Statuses=0008 0009
09:04:46 Msec=3000  True Az=112.995  Ze=-107.61  Az status=0008  Ze status=0009
09:04:46 Check angles
09:04:46 SkyScan query
09:04:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.58<-20572  Statuses=0008 0009
09:04:46 Msec=3750  True Az=112.995  Ze=-128.58  Az status=0008  Ze status=0009
09:04:47 Check angles
09:04:47 SkyScan query
09:04:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.535<-21969  Statuses=0008 0009
09:04:47 Msec=4500  True Az=112.995  Ze=-149.535  Az status=0008  Ze status=0009
09:04:47 Check angles
09:04:47 SkyScan query
09:04:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.475<-23365  Statuses=0008 0009
09:04:48 Msec=5250  True Az=112.995  Ze=-170.475  Az status=0008  Ze status=0009
09:04:48 Check angles
09:04:48 SkyScan query
09:04:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:04:49 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:04:49 Message to Master queued w/err=0: serial=351025 error=0
09:04:54 Received message from Master: op=Filter serial=351026
09:04:54 Color wheel filter change from 0 to 0
09:04:54 FLIGetFilterPos err=0  currentPosition=0
09:04:54 FLIGetStepsRemaining err=0  RemainingSteps=0
09:04:54 Filter is already there-color wheel unchanged
09:04:54 Received message from Master: op=Shutter serial=351027
09:04:54 Shutter LASER open
09:04:54 Received message from Camera: op=State serial=351029
09:04:54 GetSingleValue result=40  Value=cccccccc
09:04:54 SkyScan query
09:04:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:04:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:55 Parameters OK
09:04:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:55 Set A/D data flow result=40
09:04:55 Set A/D channel type result=40
09:04:55 Set A/D encoding result=40
09:04:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:55 Set channel filter=0.000000e+000  result=40
09:04:55 Config A/D  Result=40
09:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:55 Get A/D filter: -9.255963e+061  result=40
09:04:55 Get A/D value=-858993460  result=40
09:04:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:55 Parameters OK
09:04:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:55 Set A/D data flow result=40
09:04:55 Set A/D channel type result=40
09:04:55 Set A/D encoding result=40
09:04:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:55 Set channel filter=0.000000e+000  result=40
09:04:55 Config A/D  Result=40
09:04:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:55 Get A/D filter: -9.255963e+061  result=40
09:04:55 Get A/D value=-858993460  result=40
09:04:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:04:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:04:55 Aux=
09:04:55 Message to Camera, serial 351029 queued
09:05:03 Received message from Master: op=Shutter serial=351039
09:05:03 Shutter LASER close
09:05:03 Received message from Master: op=PointingHead serial=351043
09:05:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:05:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:05:04 Point started: ret=0
09:05:04 point_skyscan result=0
09:05:05 Check angles
09:05:05 SkyScan query
09:05:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.95<-21530  Statuses=0008 0009
09:05:05 Msec=0  True Az=112.995  Ze=-142.95  Az status=0008  Ze status=0009
09:05:05 Check angles
09:05:05 SkyScan query
09:05:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.98<-20132  Statuses=0008 0009
09:05:06 Msec=750  True Az=112.995  Ze=-121.98  Az status=0008  Ze status=0009
09:05:06 Check angles
09:05:06 SkyScan query
09:05:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.055<-18737  Statuses=0008 0009
09:05:07 Msec=1500  True Az=112.995  Ze=-101.055  Az status=0008  Ze status=0009
09:05:07 Check angles
09:05:07 SkyScan query
09:05:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.115<-17341  Statuses=0008 0009
09:05:07 Msec=2250  True Az=112.995  Ze=-80.115  Az status=0008  Ze status=0009
09:05:08 Check angles
09:05:08 SkyScan query
09:05:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.16<-15944  Statuses=0008 0009
09:05:08 Msec=3000  True Az=112.995  Ze=-59.16  Az status=0008  Ze status=0009
09:05:08 Check angles
09:05:08 SkyScan query
09:05:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.74<-14516  Statuses=0008 0009
09:05:09 Msec=3750  True Az=112.995  Ze=-37.74  Az status=0008  Ze status=0009
09:05:09 Check angles
09:05:09 SkyScan query
09:05:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.785<-13119  Statuses=0008 0009
09:05:10 Msec=4500  True Az=112.995  Ze=-16.785  Az status=0008  Ze status=0009
09:05:10 Check angles
09:05:10 SkyScan query
09:05:10 SkyScan query done: ret=0  az=112.995<-7533  ze=4.14<-11724  Statuses=0008 0009
09:05:10 Msec=5250  True Az=112.995  Ze=4.14  Az status=0008  Ze status=0009
09:05:11 Check angles
09:05:11 SkyScan query
09:05:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:05:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:05:11 Message to Master queued w/err=0: serial=351043 error=0
09:05:16 Received message from Master: op=Filter serial=351044
09:05:16 Color wheel filter change from 0 to 0
09:05:16 FLIGetFilterPos err=0  currentPosition=0
09:05:16 FLIGetStepsRemaining err=0  RemainingSteps=0
09:05:16 Filter is already there-color wheel unchanged
09:05:16 Received message from Master: op=Shutter serial=351045
09:05:16 Shutter LASER close
09:05:16 Received message from Camera: op=State serial=351047
09:05:16 GetSingleValue result=40  Value=cccccccc
09:05:16 SkyScan query
09:05:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:05:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:05:17 Parameters OK
09:05:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:05:17 Set A/D data flow result=40
09:05:17 Set A/D channel type result=40
09:05:17 Set A/D encoding result=40
09:05:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:05:17 Set channel filter=0.000000e+000  result=40
09:05:17 Config A/D  Result=40
09:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:05:17 Get A/D filter: -9.255963e+061  result=40
09:05:17 Get A/D value=-858993460  result=40
09:05:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:05:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:05:17 Parameters OK
09:05:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:05:17 Set A/D data flow result=40
09:05:17 Set A/D channel type result=40
09:05:17 Set A/D encoding result=40
09:05:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:05:17 Set channel filter=0.000000e+000  result=40
09:05:17 Config A/D  Result=40
09:05:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:05:17 Get A/D filter: -9.255963e+061  result=40
09:05:17 Get A/D value=-858993460  result=40
09:05:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:05:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:05:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:05:17 Aux=
09:05:17 Message to Camera, serial 351047 queued
09:05:54 Received message from Master: op=PointingHead serial=351060
09:05:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:05:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:05:54 Point started: ret=0
09:05:54 point_skyscan result=0
09:05:55 Check angles
09:05:55 SkyScan query
09:05:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:05:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:05:56 Message to Master queued w/err=0: serial=351060 error=0
09:06:01 Received message from Master: op=Filter serial=351061
09:06:01 Color wheel filter change from 0 to 0
09:06:01 FLIGetFilterPos err=0  currentPosition=0
09:06:01 FLIGetStepsRemaining err=0  RemainingSteps=0
09:06:01 Filter is already there-color wheel unchanged
09:06:01 Received message from Master: op=Shutter serial=351062
09:06:01 Shutter LASER close
09:06:01 Received message from Camera: op=State serial=351064
09:06:01 GetSingleValue result=40  Value=cccccccc
09:06:01 SkyScan query
09:06:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:06:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:06:01 Parameters OK
09:06:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:06:01 Set A/D data flow result=40
09:06:01 Set A/D channel type result=40
09:06:01 Set A/D encoding result=40
09:06:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:06:01 Set channel filter=0.000000e+000  result=40
09:06:01 Config A/D  Result=40
09:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:06:01 Get A/D filter: -9.255963e+061  result=40
09:06:01 Get A/D value=-858993460  result=40
09:06:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:06:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:06:01 Parameters OK
09:06:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:06:01 Set A/D data flow result=40
09:06:01 Set A/D channel type result=40
09:06:01 Set A/D encoding result=40
09:06:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:06:01 Set channel filter=0.000000e+000  result=40
09:06:01 Config A/D  Result=40
09:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:06:01 Get A/D filter: -9.255963e+061  result=40
09:06:01 Get A/D value=-858993460  result=40
09:06:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:06:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:06:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:06:01 Aux=
09:06:01 Message to Camera, serial 351064 queued
09:06:38 Received message from Master: op=PointingHead serial=351077
09:06:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:06:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:06:39 Point started: ret=0
09:06:39 point_skyscan result=0
09:06:39 Check angles
09:06:39 SkyScan query
09:06:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:06:40 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:06:40 Message to Master queued w/err=0: serial=351077 error=0
09:06:45 Received message from Master: op=Filter serial=351078
09:06:45 Color wheel filter change from 0 to 0
09:06:45 FLIGetFilterPos err=0  currentPosition=0
09:06:45 FLIGetStepsRemaining err=0  RemainingSteps=0
09:06:45 Filter is already there-color wheel unchanged
09:06:45 Received message from Master: op=Shutter serial=351079
09:06:45 Shutter LASER close
09:06:45 Received message from Camera: op=State serial=351081
09:06:45 GetSingleValue result=40  Value=cccccccc
09:06:45 SkyScan query
09:06:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:06:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:06:46 Parameters OK
09:06:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:06:46 Set A/D data flow result=40
09:06:46 Set A/D channel type result=40
09:06:46 Set A/D encoding result=40
09:06:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:06:46 Set channel filter=0.000000e+000  result=40
09:06:46 Config A/D  Result=40
09:06:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:06:46 Get A/D filter: -9.255963e+061  result=40
09:06:46 Get A/D value=-858993460  result=40
09:06:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:06:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:06:46 Parameters OK
09:06:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:06:46 Set A/D data flow result=40
09:06:46 Set A/D channel type result=40
09:06:46 Set A/D encoding result=40
09:06:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:06:46 Set channel filter=0.000000e+000  result=40
09:06:46 Config A/D  Result=40
09:06:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:06:46 Get A/D filter: -9.255963e+061  result=40
09:06:46 Get A/D value=-858993460  result=40
09:06:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:06:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:06:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:06:46 Aux=
09:06:46 Message to Camera, serial 351081 queued
09:07:23 Received message from Master: op=PointingHead serial=351094
09:07:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:07:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:07:23 Point started: ret=0
09:07:23 point_skyscan result=0
09:07:24 Check angles
09:07:24 SkyScan query
09:07:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:07:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:07:24 Message to Master queued w/err=0: serial=351094 error=0
09:07:29 Received message from Master: op=Filter serial=351095
09:07:29 Color wheel filter change from 0 to 0
09:07:29 FLIGetFilterPos err=0  currentPosition=0
09:07:29 FLIGetStepsRemaining err=0  RemainingSteps=0
09:07:29 Filter is already there-color wheel unchanged
09:07:29 Received message from Master: op=Shutter serial=351096
09:07:29 Shutter LASER close
09:07:29 Received message from Camera: op=State serial=351098
09:07:29 GetSingleValue result=40  Value=cccccccc
09:07:29 SkyScan query
09:07:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:07:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:07:30 Parameters OK
09:07:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:07:30 Set A/D data flow result=40
09:07:30 Set A/D channel type result=40
09:07:30 Set A/D encoding result=40
09:07:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:07:30 Set channel filter=0.000000e+000  result=40
09:07:30 Config A/D  Result=40
09:07:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:07:30 Get A/D filter: -9.255963e+061  result=40
09:07:30 Get A/D value=-858993460  result=40
09:07:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:07:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:07:30 Parameters OK
09:07:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:07:30 Set A/D data flow result=40
09:07:30 Set A/D channel type result=40
09:07:30 Set A/D encoding result=40
09:07:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:07:30 Set channel filter=0.000000e+000  result=40
09:07:30 Config A/D  Result=40
09:07:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:07:30 Get A/D filter: -9.255963e+061  result=40
09:07:30 Get A/D value=-858993460  result=40
09:07:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:07:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:07:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:07:30 Aux=
09:07:30 Message to Camera, serial 351098 queued
09:08:07 Received message from Master: op=PointingHead serial=351111
09:08:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:08:07 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:08:07 Point started: ret=0
09:08:07 point_skyscan result=0
09:08:08 Check angles
09:08:08 SkyScan query
09:08:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
09:08:09 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
09:08:09 Check angles
09:08:09 SkyScan query
09:08:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.98<-14932  Statuses=0008 0009
09:08:09 Msec=750  True Az=112.995  Ze=-43.98  Az status=0008  Ze status=0009
09:08:10 Check angles
09:08:10 SkyScan query
09:08:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.935<-16329  Statuses=0008 0009
09:08:10 Msec=1500  True Az=112.995  Ze=-64.935  Az status=0008  Ze status=0009
09:08:10 Check angles
09:08:10 SkyScan query
09:08:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.89<-17726  Statuses=0008 0009
09:08:11 Msec=2250  True Az=112.995  Ze=-85.89  Az status=0008  Ze status=0009
09:08:11 Check angles
09:08:11 SkyScan query
09:08:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.83<-19122  Statuses=0008 0009
09:08:12 Msec=3000  True Az=112.995  Ze=-106.83  Az status=0008  Ze status=0009
09:08:12 Check angles
09:08:12 SkyScan query
09:08:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.815<-20521  Statuses=0008 0009
09:08:12 Msec=3750  True Az=112.995  Ze=-127.815  Az status=0008  Ze status=0009
09:08:13 Check angles
09:08:13 SkyScan query
09:08:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.755<-21917  Statuses=0008 0009
09:08:13 Msec=4500  True Az=112.995  Ze=-148.755  Az status=0008  Ze status=0009
09:08:13 Check angles
09:08:13 SkyScan query
09:08:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.695<-23313  Statuses=0008 0009
09:08:14 Msec=5250  True Az=112.995  Ze=-169.695  Az status=0008  Ze status=0009
09:08:14 Check angles
09:08:14 SkyScan query
09:08:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:08:15 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:08:15 Message to Master queued w/err=0: serial=351111 error=0
09:08:20 Received message from Master: op=Filter serial=351112
09:08:20 Color wheel filter change from 0 to 0
09:08:20 FLIGetFilterPos err=0  currentPosition=0
09:08:20 FLIGetStepsRemaining err=0  RemainingSteps=0
09:08:20 Filter is already there-color wheel unchanged
09:08:20 Received message from Master: op=Shutter serial=351113
09:08:20 Shutter LASER open
09:08:20 Received message from Camera: op=State serial=351115
09:08:20 GetSingleValue result=40  Value=cccccccc
09:08:20 SkyScan query
09:08:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:08:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:21 Parameters OK
09:08:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:21 Set A/D data flow result=40
09:08:21 Set A/D channel type result=40
09:08:21 Set A/D encoding result=40
09:08:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:21 Set channel filter=0.000000e+000  result=40
09:08:21 Config A/D  Result=40
09:08:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:21 Get A/D filter: -9.255963e+061  result=40
09:08:21 Get A/D value=-858993460  result=40
09:08:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:21 Parameters OK
09:08:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:21 Set A/D data flow result=40
09:08:21 Set A/D channel type result=40
09:08:21 Set A/D encoding result=40
09:08:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:21 Set channel filter=0.000000e+000  result=40
09:08:21 Config A/D  Result=40
09:08:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:21 Get A/D filter: -9.255963e+061  result=40
09:08:21 Get A/D value=-858993460  result=40
09:08:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:08:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:08:21 Aux=
09:08:21 Message to Camera, serial 351115 queued
09:08:29 Received message from Master: op=Shutter serial=351125
09:08:29 Shutter LASER close
09:08:30 Received message from Master: op=PointingHead serial=351129
09:08:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:08:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:08:30 Point started: ret=0
09:08:30 point_skyscan result=0
09:08:31 Check angles
09:08:31 SkyScan query
09:08:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.65<-21510  Statuses=0008 0009
09:08:31 Msec=0  True Az=112.995  Ze=-142.65  Az status=0008  Ze status=0009
09:08:31 Check angles
09:08:31 SkyScan query
09:08:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.38<-20092  Statuses=0008 0009
09:08:32 Msec=750  True Az=112.995  Ze=-121.38  Az status=0008  Ze status=0009
09:08:32 Check angles
09:08:32 SkyScan query
09:08:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.41<-18694  Statuses=0008 0009
09:08:33 Msec=1500  True Az=112.995  Ze=-100.41  Az status=0008  Ze status=0009
09:08:33 Check angles
09:08:33 SkyScan query
09:08:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
09:08:34 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
09:08:34 Check angles
09:08:34 SkyScan query
09:08:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.485<-15899  Statuses=0008 0009
09:08:34 Msec=3000  True Az=112.995  Ze=-58.485  Az status=0008  Ze status=0009
09:08:34 Check angles
09:08:34 SkyScan query
09:08:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
09:08:35 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
09:08:35 Check angles
09:08:35 SkyScan query
09:08:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.14<-13076  Statuses=0008 0009
09:08:36 Msec=4500  True Az=112.995  Ze=-16.14  Az status=0008  Ze status=0009
09:08:36 Check angles
09:08:36 SkyScan query
09:08:37 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
09:08:37 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
09:08:37 Check angles
09:08:37 SkyScan query
09:08:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:08:37 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:08:37 Message to Master queued w/err=0: serial=351129 error=0
09:08:42 Received message from Master: op=Filter serial=351130
09:08:42 Color wheel filter change from 0 to 0
09:08:42 FLIGetFilterPos err=0  currentPosition=0
09:08:42 FLIGetStepsRemaining err=0  RemainingSteps=0
09:08:42 Filter is already there-color wheel unchanged
09:08:42 Received message from Master: op=Shutter serial=351131
09:08:42 Shutter LASER close
09:08:43 Received message from Camera: op=State serial=351133
09:08:43 GetSingleValue result=40  Value=cccccccc
09:08:43 SkyScan query
09:08:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:43 Parameters OK
09:08:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:43 Set A/D data flow result=40
09:08:43 Set A/D channel type result=40
09:08:43 Set A/D encoding result=40
09:08:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:43 Set channel filter=0.000000e+000  result=40
09:08:43 Config A/D  Result=40
09:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:43 Get A/D filter: -9.255963e+061  result=40
09:08:43 Get A/D value=-858993460  result=40
09:08:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:43 Parameters OK
09:08:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:43 Set A/D data flow result=40
09:08:43 Set A/D channel type result=40
09:08:43 Set A/D encoding result=40
09:08:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:43 Set channel filter=0.000000e+000  result=40
09:08:43 Config A/D  Result=40
09:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:43 Get A/D filter: -9.255963e+061  result=40
09:08:43 Get A/D value=-858993460  result=40
09:08:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:08:43 Aux=
09:08:43 Message to Camera, serial 351133 queued
09:09:20 Received message from Master: op=PointingHead serial=351146
09:09:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:09:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:09:20 Point started: ret=0
09:09:20 point_skyscan result=0
09:09:21 Check angles
09:09:21 SkyScan query
09:09:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:09:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:09:22 Message to Master queued w/err=0: serial=351146 error=0
09:09:27 Received message from Master: op=Filter serial=351147
09:09:27 Color wheel filter change from 0 to 0
09:09:27 FLIGetFilterPos err=0  currentPosition=0
09:09:27 FLIGetStepsRemaining err=0  RemainingSteps=0
09:09:27 Filter is already there-color wheel unchanged
09:09:27 Received message from Master: op=Shutter serial=351148
09:09:27 Shutter LASER close
09:09:27 Received message from Camera: op=State serial=351150
09:09:27 GetSingleValue result=40  Value=cccccccc
09:09:27 SkyScan query
09:09:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:09:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:09:27 Parameters OK
09:09:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:09:27 Set A/D data flow result=40
09:09:27 Set A/D channel type result=40
09:09:27 Set A/D encoding result=40
09:09:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:09:27 Set channel filter=0.000000e+000  result=40
09:09:27 Config A/D  Result=40
09:09:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:09:27 Get A/D filter: -9.255963e+061  result=40
09:09:27 Get A/D value=-858993460  result=40
09:09:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:09:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:09:27 Parameters OK
09:09:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:09:27 Set A/D data flow result=40
09:09:27 Set A/D channel type result=40
09:09:27 Set A/D encoding result=40
09:09:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:09:27 Set channel filter=0.000000e+000  result=40
09:09:27 Config A/D  Result=40
09:09:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:09:27 Get A/D filter: -9.255963e+061  result=40
09:09:27 Get A/D value=-858993460  result=40
09:09:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:09:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:09:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:09:27 Aux=
09:09:27 Message to Camera, serial 351150 queued
09:10:04 Received message from Master: op=PointingHead serial=351163
09:10:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:10:04 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:10:05 Point started: ret=0
09:10:05 point_skyscan result=0
09:10:05 Check angles
09:10:05 SkyScan query
09:10:06 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.495<-12433  Statuses=0009 0008
09:10:06 Msec=0  True Az=135.9  Ze=-6.495  Az status=0009  Ze status=0008
09:10:06 Check angles
09:10:06 SkyScan query
09:10:07 SkyScan query done: ret=0  az=153.465<-10231  ze=-6.48<-12432  Statuses=0009 0008
09:10:07 Msec=750  True Az=153.465  Ze=-6.48  Az status=0009  Ze status=0008
09:10:07 Check angles
09:10:07 SkyScan query
09:10:07 SkyScan query done: ret=0  az=170.82<-11388  ze=-6.48<-12432  Statuses=0009 0008
09:10:07 Msec=1500  True Az=170.82  Ze=-6.48  Az status=0009  Ze status=0008
09:10:08 Check angles
09:10:08 SkyScan query
09:10:08 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
09:10:08 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
09:10:08 Message to Master queued w/err=0: serial=351163 error=0
09:10:13 Received message from Master: op=Filter serial=351164
09:10:13 Color wheel filter change from 0 to 0
09:10:13 FLIGetFilterPos err=0  currentPosition=0
09:10:13 FLIGetStepsRemaining err=0  RemainingSteps=0
09:10:13 Filter is already there-color wheel unchanged
09:10:13 Received message from Master: op=Shutter serial=351165
09:10:13 Shutter LASER close
09:10:13 Received message from Camera: op=State serial=351167
09:10:13 GetSingleValue result=40  Value=cccccccc
09:10:13 SkyScan query
09:10:14 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
09:10:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:10:14 Parameters OK
09:10:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:10:14 Set A/D data flow result=40
09:10:14 Set A/D channel type result=40
09:10:14 Set A/D encoding result=40
09:10:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:10:14 Set channel filter=0.000000e+000  result=40
09:10:14 Config A/D  Result=40
09:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:10:14 Get A/D filter: -9.255963e+061  result=40
09:10:14 Get A/D value=-858993460  result=40
09:10:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:10:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:10:14 Parameters OK
09:10:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:10:14 Set A/D data flow result=40
09:10:14 Set A/D channel type result=40
09:10:14 Set A/D encoding result=40
09:10:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:10:14 Set channel filter=0.000000e+000  result=40
09:10:14 Config A/D  Result=40
09:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:10:14 Get A/D filter: -9.255963e+061  result=40
09:10:14 Get A/D value=-858993460  result=40
09:10:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:10:14 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:10:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:10:14 Aux=
09:10:14 Message to Camera, serial 351167 queued
09:10:51 Received message from Master: op=PointingHead serial=351180
09:10:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:10:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:10:51 Point started: ret=0
09:10:51 point_skyscan result=0
09:10:52 Check angles
09:10:52 SkyScan query
09:10:53 SkyScan query done: ret=0  az=153.09<-10206  ze=6.51<-11566  Statuses=0009 0008
09:10:53 Msec=0  True Az=153.09  Ze=6.51  Az status=0009  Ze status=0008
09:10:53 Check angles
09:10:53 SkyScan query
09:10:53 SkyScan query done: ret=0  az=135.27<-9018  ze=6.495<-11567  Statuses=0009 0008
09:10:53 Msec=750  True Az=135.27  Ze=6.495  Az status=0009  Ze status=0008
09:10:53 Check angles
09:10:53 SkyScan query
09:10:54 SkyScan query done: ret=0  az=117.795<-7853  ze=6.495<-11567  Statuses=0009 0008
09:10:54 Msec=1500  True Az=117.795  Ze=6.495  Az status=0009  Ze status=0008
09:10:54 Check angles
09:10:54 SkyScan query
09:10:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:10:55 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:10:55 Message to Master queued w/err=0: serial=351180 error=0
09:11:00 Received message from Master: op=Filter serial=351181
09:11:00 Color wheel filter change from 0 to 0
09:11:00 FLIGetFilterPos err=0  currentPosition=0
09:11:00 FLIGetStepsRemaining err=0  RemainingSteps=0
09:11:00 Filter is already there-color wheel unchanged
09:11:00 Received message from Master: op=Shutter serial=351182
09:11:00 Shutter LASER close
09:11:00 Received message from Camera: op=State serial=351184
09:11:00 GetSingleValue result=40  Value=cccccccc
09:11:00 SkyScan query
09:11:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:11:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:01 Parameters OK
09:11:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:01 Set A/D data flow result=40
09:11:01 Set A/D channel type result=40
09:11:01 Set A/D encoding result=40
09:11:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:01 Set channel filter=0.000000e+000  result=40
09:11:01 Config A/D  Result=40
09:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:01 Get A/D filter: -9.255963e+061  result=40
09:11:01 Get A/D value=-858993460  result=40
09:11:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:01 Parameters OK
09:11:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:01 Set A/D data flow result=40
09:11:01 Set A/D channel type result=40
09:11:01 Set A/D encoding result=40
09:11:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:01 Set channel filter=0.000000e+000  result=40
09:11:01 Config A/D  Result=40
09:11:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:01 Get A/D filter: -9.255963e+061  result=40
09:11:01 Get A/D value=-858993460  result=40
09:11:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:11:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:11:01 Aux=
09:11:01 Message to Camera, serial 351184 queued
09:11:37 Received message from Master: op=PointingHead serial=351197
09:11:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:11:37 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:11:38 Point started: ret=0
09:11:38 point_skyscan result=0
09:11:39 Check angles
09:11:39 SkyScan query
09:11:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.595<-13573  Statuses=0008 0009
09:11:39 Msec=0  True Az=112.995  Ze=-23.595  Az status=0008  Ze status=0009
09:11:39 Check angles
09:11:39 SkyScan query
09:11:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.55<-14970  Statuses=0008 0009
09:11:40 Msec=750  True Az=112.995  Ze=-44.55  Az status=0008  Ze status=0009
09:11:40 Check angles
09:11:40 SkyScan query
09:11:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.49<-16366  Statuses=0008 0009
09:11:41 Msec=1500  True Az=112.995  Ze=-65.49  Az status=0008  Ze status=0009
09:11:41 Check angles
09:11:41 SkyScan query
09:11:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.445<-17763  Statuses=0008 0009
09:11:41 Msec=2250  True Az=112.995  Ze=-86.445  Az status=0008  Ze status=0009
09:11:42 Check angles
09:11:42 SkyScan query
09:11:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.43<-19162  Statuses=0008 0009
09:11:42 Msec=3000  True Az=112.995  Ze=-107.43  Az status=0008  Ze status=0009
09:11:42 Check angles
09:11:42 SkyScan query
09:11:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.355<-20557  Statuses=0008 0009
09:11:43 Msec=3750  True Az=112.995  Ze=-128.355  Az status=0008  Ze status=0009
09:11:43 Check angles
09:11:43 SkyScan query
09:11:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.325<-21955  Statuses=0008 0009
09:11:44 Msec=4500  True Az=112.995  Ze=-149.325  Az status=0008  Ze status=0009
09:11:44 Check angles
09:11:44 SkyScan query
09:11:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.265<-23351  Statuses=0008 0009
09:11:44 Msec=5250  True Az=112.995  Ze=-170.265  Az status=0008  Ze status=0009
09:11:45 Check angles
09:11:45 SkyScan query
09:11:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:11:45 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:11:45 Message to Master queued w/err=0: serial=351197 error=0
09:11:50 Received message from Master: op=Filter serial=351198
09:11:50 Color wheel filter change from 0 to 0
09:11:50 FLIGetFilterPos err=0  currentPosition=0
09:11:50 FLIGetStepsRemaining err=0  RemainingSteps=0
09:11:50 Filter is already there-color wheel unchanged
09:11:50 Received message from Master: op=Shutter serial=351199
09:11:50 Shutter LASER open
09:11:50 Received message from Camera: op=State serial=351201
09:11:50 GetSingleValue result=40  Value=cccccccc
09:11:50 SkyScan query
09:11:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:11:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:51 Parameters OK
09:11:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:51 Set A/D data flow result=40
09:11:51 Set A/D channel type result=40
09:11:51 Set A/D encoding result=40
09:11:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:51 Set channel filter=0.000000e+000  result=40
09:11:51 Config A/D  Result=40
09:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:51 Get A/D filter: -9.255963e+061  result=40
09:11:51 Get A/D value=-858993460  result=40
09:11:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:51 Parameters OK
09:11:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:51 Set A/D data flow result=40
09:11:51 Set A/D channel type result=40
09:11:51 Set A/D encoding result=40
09:11:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:51 Set channel filter=0.000000e+000  result=40
09:11:51 Config A/D  Result=40
09:11:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:51 Get A/D filter: -9.255963e+061  result=40
09:11:51 Get A/D value=-858993460  result=40
09:11:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:11:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:11:51 Aux=
09:11:51 Message to Camera, serial 351201 queued
09:11:59 Received message from Master: op=Shutter serial=351211
09:11:59 Shutter LASER close
09:12:00 Received message from Master: op=PointingHead serial=351215
09:12:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:12:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:12:00 Point started: ret=0
09:12:00 point_skyscan result=0
09:12:01 Check angles
09:12:01 SkyScan query
09:12:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.025<-21535  Statuses=0008 0009
09:12:02 Msec=0  True Az=112.995  Ze=-143.025  Az status=0008  Ze status=0009
09:12:02 Check angles
09:12:02 SkyScan query
09:12:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.62<-20108  Statuses=0008 0009
09:12:02 Msec=750  True Az=112.995  Ze=-121.62  Az status=0008  Ze status=0009
09:12:03 Check angles
09:12:03 SkyScan query
09:12:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.68<-18712  Statuses=0008 0009
09:12:03 Msec=1500  True Az=112.995  Ze=-100.68  Az status=0008  Ze status=0009
09:12:03 Check angles
09:12:03 SkyScan query
09:12:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.725<-17315  Statuses=0008 0009
09:12:04 Msec=2250  True Az=112.995  Ze=-79.725  Az status=0008  Ze status=0009
09:12:04 Check angles
09:12:04 SkyScan query
09:12:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.77<-15918  Statuses=0008 0009
09:12:05 Msec=3000  True Az=112.995  Ze=-58.77  Az status=0008  Ze status=0009
09:12:05 Check angles
09:12:05 SkyScan query
09:12:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.8<-14520  Statuses=0008 0009
09:12:05 Msec=3750  True Az=112.995  Ze=-37.8  Az status=0008  Ze status=0009
09:12:06 Check angles
09:12:06 SkyScan query
09:12:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.845<-13123  Statuses=0008 0009
09:12:06 Msec=4500  True Az=112.995  Ze=-16.845  Az status=0008  Ze status=0009
09:12:06 Check angles
09:12:06 SkyScan query
09:12:07 SkyScan query done: ret=0  az=112.995<-7533  ze=4.08<-11728  Statuses=0008 0009
09:12:07 Msec=5250  True Az=112.995  Ze=4.08  Az status=0008  Ze status=0009
09:12:07 Check angles
09:12:07 SkyScan query
09:12:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:12:08 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:12:08 Message to Master queued w/err=0: serial=351215 error=0
09:12:13 Received message from Master: op=Filter serial=351216
09:12:13 Color wheel filter change from 0 to 0
09:12:13 FLIGetFilterPos err=0  currentPosition=0
09:12:13 FLIGetStepsRemaining err=0  RemainingSteps=0
09:12:13 Filter is already there-color wheel unchanged
09:12:13 Received message from Master: op=Shutter serial=351217
09:12:13 Shutter LASER close
09:12:13 Received message from Camera: op=State serial=351219
09:12:13 GetSingleValue result=40  Value=cccccccc
09:12:13 SkyScan query
09:12:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:12:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:12:14 Parameters OK
09:12:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:12:14 Set A/D data flow result=40
09:12:14 Set A/D channel type result=40
09:12:14 Set A/D encoding result=40
09:12:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:12:14 Set channel filter=0.000000e+000  result=40
09:12:14 Config A/D  Result=40
09:12:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:12:14 Get A/D filter: -9.255963e+061  result=40
09:12:14 Get A/D value=-858993460  result=40
09:12:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:12:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:12:14 Parameters OK
09:12:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:12:14 Set A/D data flow result=40
09:12:14 Set A/D channel type result=40
09:12:14 Set A/D encoding result=40
09:12:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:12:14 Set channel filter=0.000000e+000  result=40
09:12:14 Config A/D  Result=40
09:12:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:12:14 Get A/D filter: -9.255963e+061  result=40
09:12:14 Get A/D value=-858993460  result=40
09:12:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:12:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:12:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:12:14 Aux=
09:12:14 Message to Camera, serial 351219 queued
09:12:50 Received message from Master: op=PointingHead serial=351232
09:12:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:12:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:12:51 Point started: ret=0
09:12:51 point_skyscan result=0
09:12:52 Check angles
09:12:52 SkyScan query
09:12:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:12:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:12:52 Message to Master queued w/err=0: serial=351232 error=0
09:12:57 Received message from Master: op=Filter serial=351233
09:12:57 Color wheel filter change from 0 to 0
09:12:57 FLIGetFilterPos err=0  currentPosition=0
09:12:57 FLIGetStepsRemaining err=0  RemainingSteps=0
09:12:57 Filter is already there-color wheel unchanged
09:12:57 Received message from Master: op=Shutter serial=351234
09:12:57 Shutter LASER close
09:12:57 Received message from Camera: op=State serial=351236
09:12:57 GetSingleValue result=40  Value=cccccccc
09:12:57 SkyScan query
09:12:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:12:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:12:58 Parameters OK
09:12:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:12:58 Set A/D data flow result=40
09:12:58 Set A/D channel type result=40
09:12:58 Set A/D encoding result=40
09:12:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:12:58 Set channel filter=0.000000e+000  result=40
09:12:58 Config A/D  Result=40
09:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:12:58 Get A/D filter: -9.255963e+061  result=40
09:12:58 Get A/D value=-858993460  result=40
09:12:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:12:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:12:58 Parameters OK
09:12:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:12:58 Set A/D data flow result=40
09:12:58 Set A/D channel type result=40
09:12:58 Set A/D encoding result=40
09:12:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:12:58 Set channel filter=0.000000e+000  result=40
09:12:58 Config A/D  Result=40
09:12:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:12:58 Get A/D filter: -9.255963e+061  result=40
09:12:58 Get A/D value=-858993460  result=40
09:12:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:12:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:12:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:12:58 Aux=
09:12:58 Message to Camera, serial 351236 queued
09:13:38 Received message from Master: op=PointingHead serial=351248
09:13:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:13:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:13:38 Point started: ret=0
09:13:38 point_skyscan result=0
09:13:39 Check angles
09:13:39 SkyScan query
09:13:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:13:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:13:39 Message to Master queued w/err=0: serial=351248 error=0
09:13:45 Received message from Master: op=Filter serial=351249
09:13:45 Color wheel filter change from 0 to 0
09:13:45 FLIGetFilterPos err=0  currentPosition=0
09:13:45 FLIGetStepsRemaining err=0  RemainingSteps=0
09:13:45 Filter is already there-color wheel unchanged
09:13:46 Received message from Master: op=Shutter serial=351250
09:13:46 Shutter LASER close
09:13:46 Received message from Camera: op=State serial=351252
09:13:46 GetSingleValue result=40  Value=cccccccc
09:13:46 SkyScan query
09:13:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:13:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:13:47 Parameters OK
09:13:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:13:47 Set A/D data flow result=40
09:13:47 Set A/D channel type result=40
09:13:47 Set A/D encoding result=40
09:13:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:13:47 Set channel filter=0.000000e+000  result=40
09:13:47 Config A/D  Result=40
09:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:13:47 Get A/D filter: -9.255963e+061  result=40
09:13:47 Get A/D value=-858993460  result=40
09:13:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:13:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:13:47 Parameters OK
09:13:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:13:47 Set A/D data flow result=40
09:13:47 Set A/D channel type result=40
09:13:47 Set A/D encoding result=40
09:13:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:13:47 Set channel filter=0.000000e+000  result=40
09:13:47 Config A/D  Result=40
09:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:13:47 Get A/D filter: -9.255963e+061  result=40
09:13:47 Get A/D value=-858993460  result=40
09:13:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:13:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:13:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:13:47 Aux=
09:13:47 Message to Camera, serial 351252 queued
[UTC 2019-3-19  09:14:23]
09:14:23 Received message from Master: op=PointingHead serial=351264
09:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:14:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:14:24 Point started: ret=0
09:14:24 point_skyscan result=0
09:14:25 Check angles
09:14:25 SkyScan query
09:14:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:14:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:14:25 Message to Master queued w/err=0: serial=351264 error=0
09:14:30 Received message from Master: op=Filter serial=351265
09:14:30 Color wheel filter change from 0 to 0
09:14:30 FLIGetFilterPos err=0  currentPosition=0
09:14:30 FLIGetStepsRemaining err=0  RemainingSteps=0
09:14:30 Filter is already there-color wheel unchanged
09:14:31 Received message from Master: op=Shutter serial=351266
09:14:31 Shutter LASER close
09:14:31 Received message from Camera: op=State serial=351268
09:14:31 GetSingleValue result=40  Value=cccccccc
09:14:31 SkyScan query
09:14:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:14:31 Parameters OK
09:14:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:14:31 Set A/D data flow result=40
09:14:31 Set A/D channel type result=40
09:14:31 Set A/D encoding result=40
09:14:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:14:31 Set channel filter=0.000000e+000  result=40
09:14:31 Config A/D  Result=40
09:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:14:31 Get A/D filter: -9.255963e+061  result=40
09:14:31 Get A/D value=-858993460  result=40
09:14:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:14:31 Parameters OK
09:14:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:14:31 Set A/D data flow result=40
09:14:31 Set A/D channel type result=40
09:14:31 Set A/D encoding result=40
09:14:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:14:31 Set channel filter=0.000000e+000  result=40
09:14:31 Config A/D  Result=40
09:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:14:31 Get A/D filter: -9.255963e+061  result=40
09:14:31 Get A/D value=-858993460  result=40
09:14:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:14:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:14:31 Aux=
09:14:31 Message to Camera, serial 351268 queued
09:15:08 Received message from Master: op=PointingHead serial=351280
09:15:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:15:08 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:15:08 Point started: ret=0
09:15:08 point_skyscan result=0
09:15:09 Check angles
09:15:09 SkyScan query
09:15:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.625<-13575  Statuses=0008 0009
09:15:09 Msec=0  True Az=112.995  Ze=-23.625  Az status=0008  Ze status=0009
09:15:09 Check angles
09:15:09 SkyScan query
09:15:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.94<-14996  Statuses=0008 0009
09:15:10 Msec=750  True Az=112.995  Ze=-44.94  Az status=0008  Ze status=0009
09:15:10 Check angles
09:15:10 SkyScan query
09:15:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.88<-16392  Statuses=0008 0009
09:15:11 Msec=1500  True Az=112.995  Ze=-65.88  Az status=0008  Ze status=0009
09:15:11 Check angles
09:15:11 SkyScan query
09:15:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.82<-17788  Statuses=0008 0009
09:15:12 Msec=2250  True Az=112.995  Ze=-86.82  Az status=0008  Ze status=0009
09:15:12 Check angles
09:15:12 SkyScan query
09:15:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.21<-19214  Statuses=0008 0009
09:15:12 Msec=3000  True Az=112.995  Ze=-108.21  Az status=0008  Ze status=0009
09:15:13 Check angles
09:15:13 SkyScan query
09:15:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.6<-20640  Statuses=0008 0009
09:15:13 Msec=3750  True Az=112.995  Ze=-129.6  Az status=0008  Ze status=0009
09:15:13 Check angles
09:15:13 SkyScan query
09:15:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.555<-22037  Statuses=0008 0009
09:15:14 Msec=4500  True Az=112.995  Ze=-150.555  Az status=0008  Ze status=0009
09:15:14 Check angles
09:15:14 SkyScan query
09:15:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.3<-23420  Statuses=0008 0009
09:15:15 Msec=5250  True Az=112.995  Ze=-171.3  Az status=0008  Ze status=0009
09:15:15 Check angles
09:15:15 SkyScan query
09:15:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:15:15 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:15:15 Message to Master queued w/err=0: serial=351280 error=0
09:15:20 Received message from Master: op=Filter serial=351281
09:15:20 Color wheel filter change from 0 to 0
09:15:20 FLIGetFilterPos err=0  currentPosition=0
09:15:20 FLIGetStepsRemaining err=0  RemainingSteps=0
09:15:20 Filter is already there-color wheel unchanged
09:15:21 Received message from Master: op=Shutter serial=351282
09:15:21 Shutter LASER open
09:15:21 Received message from Camera: op=State serial=351284
09:15:21 GetSingleValue result=40  Value=cccccccc
09:15:21 SkyScan query
09:15:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:15:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:22 Parameters OK
09:15:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:22 Set A/D data flow result=40
09:15:22 Set A/D channel type result=40
09:15:22 Set A/D encoding result=40
09:15:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:22 Set channel filter=0.000000e+000  result=40
09:15:22 Config A/D  Result=40
09:15:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:22 Get A/D filter: -9.255963e+061  result=40
09:15:22 Get A/D value=-858993460  result=40
09:15:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:22 Parameters OK
09:15:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:22 Set A/D data flow result=40
09:15:22 Set A/D channel type result=40
09:15:22 Set A/D encoding result=40
09:15:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:22 Set channel filter=0.000000e+000  result=40
09:15:22 Config A/D  Result=40
09:15:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:22 Get A/D filter: -9.255963e+061  result=40
09:15:22 Get A/D value=-858993460  result=40
09:15:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:15:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:15:22 Aux=
09:15:22 Message to Camera, serial 351284 queued
09:15:29 Received message from Master: op=Shutter serial=351293
09:15:29 Shutter LASER close
09:15:31 Received message from Master: op=PointingHead serial=351297
09:15:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:15:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:15:31 Point started: ret=0
09:15:31 point_skyscan result=0
09:15:32 Check angles
09:15:32 SkyScan query
09:15:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.71<-21514  Statuses=0008 0009
09:15:32 Msec=0  True Az=112.995  Ze=-142.71  Az status=0008  Ze status=0009
09:15:33 Check angles
09:15:33 SkyScan query
09:15:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.335<-20089  Statuses=0008 0009
09:15:33 Msec=750  True Az=112.995  Ze=-121.335  Az status=0008  Ze status=0009
09:15:33 Check angles
09:15:33 SkyScan query
09:15:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.38<-18692  Statuses=0008 0009
09:15:34 Msec=1500  True Az=112.995  Ze=-100.38  Az status=0008  Ze status=0009
09:15:34 Check angles
09:15:34 SkyScan query
09:15:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.41<-17294  Statuses=0008 0009
09:15:35 Msec=2250  True Az=112.995  Ze=-79.41  Az status=0008  Ze status=0009
09:15:35 Check angles
09:15:35 SkyScan query
09:15:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.005<-15867  Statuses=0008 0009
09:15:35 Msec=3000  True Az=112.995  Ze=-58.005  Az status=0008  Ze status=0009
09:15:36 Check angles
09:15:36 SkyScan query
09:15:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.065<-14471  Statuses=0008 0009
09:15:36 Msec=3750  True Az=112.995  Ze=-37.065  Az status=0008  Ze status=0009
09:15:36 Check angles
09:15:36 SkyScan query
09:15:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.095<-13073  Statuses=0008 0009
09:15:37 Msec=4500  True Az=112.995  Ze=-16.095  Az status=0008  Ze status=0009
09:15:37 Check angles
09:15:37 SkyScan query
09:15:38 SkyScan query done: ret=0  az=112.995<-7533  ze=4.68<-11688  Statuses=0008 0009
09:15:38 Msec=5250  True Az=112.995  Ze=4.68  Az status=0008  Ze status=0009
09:15:38 Check angles
09:15:38 SkyScan query
09:15:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:15:38 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:15:38 Message to Master queued w/err=0: serial=351297 error=0
09:15:43 Received message from Master: op=Filter serial=351298
09:15:43 Color wheel filter change from 0 to 0
09:15:43 FLIGetFilterPos err=0  currentPosition=0
09:15:43 FLIGetStepsRemaining err=0  RemainingSteps=0
09:15:43 Filter is already there-color wheel unchanged
09:15:44 Received message from Master: op=Shutter serial=351299
09:15:44 Shutter LASER close
09:15:44 Received message from Camera: op=State serial=351301
09:15:44 GetSingleValue result=40  Value=cccccccc
09:15:44 SkyScan query
09:15:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:15:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:45 Parameters OK
09:15:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:45 Set A/D data flow result=40
09:15:45 Set A/D channel type result=40
09:15:45 Set A/D encoding result=40
09:15:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:45 Set channel filter=0.000000e+000  result=40
09:15:45 Config A/D  Result=40
09:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:45 Get A/D filter: -9.255963e+061  result=40
09:15:45 Get A/D value=-858993460  result=40
09:15:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:45 Parameters OK
09:15:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:45 Set A/D data flow result=40
09:15:45 Set A/D channel type result=40
09:15:45 Set A/D encoding result=40
09:15:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:45 Set channel filter=0.000000e+000  result=40
09:15:45 Config A/D  Result=40
09:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:45 Get A/D filter: -9.255963e+061  result=40
09:15:45 Get A/D value=-858993460  result=40
09:15:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:15:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:15:45 Aux=
09:15:45 Message to Camera, serial 351301 queued
09:16:21 Received message from Master: op=PointingHead serial=351313
09:16:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:16:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:16:21 Point started: ret=0
09:16:21 point_skyscan result=0
09:16:22 Check angles
09:16:22 SkyScan query
09:16:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:16:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:16:23 Message to Master queued w/err=0: serial=351313 error=0
09:16:28 Received message from Master: op=Filter serial=351314
09:16:28 Color wheel filter change from 0 to 0
09:16:28 FLIGetFilterPos err=0  currentPosition=0
09:16:28 FLIGetStepsRemaining err=0  RemainingSteps=0
09:16:28 Filter is already there-color wheel unchanged
09:16:28 Received message from Master: op=Shutter serial=351315
09:16:28 Shutter LASER close
09:16:28 Received message from Camera: op=State serial=351317
09:16:28 GetSingleValue result=40  Value=cccccccc
09:16:28 SkyScan query
09:16:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:16:29 Parameters OK
09:16:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:16:29 Set A/D data flow result=40
09:16:29 Set A/D channel type result=40
09:16:29 Set A/D encoding result=40
09:16:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:16:29 Set channel filter=0.000000e+000  result=40
09:16:29 Config A/D  Result=40
09:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:16:29 Get A/D filter: -9.255963e+061  result=40
09:16:29 Get A/D value=-858993460  result=40
09:16:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:16:29 Parameters OK
09:16:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:16:29 Set A/D data flow result=40
09:16:29 Set A/D channel type result=40
09:16:29 Set A/D encoding result=40
09:16:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:16:29 Set channel filter=0.000000e+000  result=40
09:16:29 Config A/D  Result=40
09:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:16:29 Get A/D filter: -9.255963e+061  result=40
09:16:29 Get A/D value=-858993460  result=40
09:16:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:16:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:16:29 Aux=
09:16:29 Message to Camera, serial 351317 queued
09:17:05 Received message from Master: op=PointingHead serial=351329
09:17:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:17:05 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:17:05 Point started: ret=0
09:17:05 point_skyscan result=0
09:17:06 Check angles
09:17:06 SkyScan query
09:17:06 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.51<-12434  Statuses=0009 0008
09:17:06 Msec=0  True Az=135.9  Ze=-6.51  Az status=0009  Ze status=0008
09:17:07 Check angles
09:17:07 SkyScan query
09:17:07 SkyScan query done: ret=0  az=153.33<-10222  ze=-6.495<-12433  Statuses=0009 0008
09:17:07 Msec=750  True Az=153.33  Ze=-6.495  Az status=0009  Ze status=0008
09:17:07 Check angles
09:17:07 SkyScan query
09:17:08 SkyScan query done: ret=0  az=170.76<-11384  ze=-6.495<-12433  Statuses=0009 0008
09:17:08 Msec=1500  True Az=170.76  Ze=-6.495  Az status=0009  Ze status=0008
09:17:08 Check angles
09:17:08 SkyScan query
09:17:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:17:09 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:17:09 Message to Master queued w/err=0: serial=351329 error=0
09:17:14 Received message from Master: op=Filter serial=351330
09:17:14 Color wheel filter change from 0 to 0
09:17:14 FLIGetFilterPos err=0  currentPosition=0
09:17:14 FLIGetStepsRemaining err=0  RemainingSteps=0
09:17:14 Filter is already there-color wheel unchanged
09:17:14 Received message from Master: op=Shutter serial=351331
09:17:14 Shutter LASER close
09:17:14 Received message from Camera: op=State serial=351333
09:17:14 GetSingleValue result=40  Value=cccccccc
09:17:14 SkyScan query
09:17:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:17:15 Parameters OK
09:17:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:17:15 Set A/D data flow result=40
09:17:15 Set A/D channel type result=40
09:17:15 Set A/D encoding result=40
09:17:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:17:15 Set channel filter=0.000000e+000  result=40
09:17:15 Config A/D  Result=40
09:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:17:15 Get A/D filter: -9.255963e+061  result=40
09:17:15 Get A/D value=-858993460  result=40
09:17:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:17:15 Parameters OK
09:17:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:17:15 Set A/D data flow result=40
09:17:15 Set A/D channel type result=40
09:17:15 Set A/D encoding result=40
09:17:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:17:15 Set channel filter=0.000000e+000  result=40
09:17:15 Config A/D  Result=40
09:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:17:15 Get A/D filter: -9.255963e+061  result=40
09:17:15 Get A/D value=-858993460  result=40
09:17:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:17:15 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:17:15 Aux=
09:17:15 Message to Camera, serial 351333 queued
09:17:51 Received message from Master: op=PointingHead serial=351346
09:17:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:17:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:17:52 Point started: ret=0
09:17:52 point_skyscan result=0
09:17:53 Check angles
09:17:53 SkyScan query
09:17:53 SkyScan query done: ret=0  az=152.52<-10168  ze=6.51<-11566  Statuses=0009 0008
09:17:53 Msec=0  True Az=152.52  Ze=6.51  Az status=0009  Ze status=0008
09:17:53 Check angles
09:17:53 SkyScan query
09:17:54 SkyScan query done: ret=0  az=135.15<-9010  ze=6.495<-11567  Statuses=0009 0008
09:17:54 Msec=750  True Az=135.15  Ze=6.495  Az status=0009  Ze status=0008
09:17:54 Check angles
09:17:54 SkyScan query
09:17:55 SkyScan query done: ret=0  az=117.255<-7817  ze=6.495<-11567  Statuses=0009 0008
09:17:55 Msec=1500  True Az=117.255  Ze=6.495  Az status=0009  Ze status=0008
09:17:55 Check angles
09:17:55 SkyScan query
09:17:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:17:55 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:17:55 Message to Master queued w/err=0: serial=351346 error=0
09:18:00 Received message from Master: op=Filter serial=351347
09:18:00 Color wheel filter change from 0 to 0
09:18:00 FLIGetFilterPos err=0  currentPosition=0
09:18:00 FLIGetStepsRemaining err=0  RemainingSteps=0
09:18:00 Filter is already there-color wheel unchanged
09:18:01 Received message from Master: op=Shutter serial=351348
09:18:01 Shutter LASER close
09:18:01 Received message from Camera: op=State serial=351350
09:18:01 GetSingleValue result=40  Value=cccccccc
09:18:01 SkyScan query
09:18:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:01 Parameters OK
09:18:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:01 Set A/D data flow result=40
09:18:01 Set A/D channel type result=40
09:18:01 Set A/D encoding result=40
09:18:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:01 Set channel filter=0.000000e+000  result=40
09:18:01 Config A/D  Result=40
09:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:01 Get A/D filter: -9.255963e+061  result=40
09:18:01 Get A/D value=-858993460  result=40
09:18:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:01 Parameters OK
09:18:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:01 Set A/D data flow result=40
09:18:01 Set A/D channel type result=40
09:18:01 Set A/D encoding result=40
09:18:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:01 Set channel filter=0.000000e+000  result=40
09:18:01 Config A/D  Result=40
09:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:01 Get A/D filter: -9.255963e+061  result=40
09:18:01 Get A/D value=-858993460  result=40
09:18:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:18:01 Aux=
09:18:01 Message to Camera, serial 351350 queued
09:18:38 Received message from Master: op=PointingHead serial=351363
09:18:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:18:38 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:18:38 Point started: ret=0
09:18:38 point_skyscan result=0
09:18:39 Check angles
09:18:39 SkyScan query
09:18:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.865<-13591  Statuses=0008 0009
09:18:40 Msec=0  True Az=112.995  Ze=-23.865  Az status=0008  Ze status=0009
09:18:40 Check angles
09:18:40 SkyScan query
09:18:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.82<-14988  Statuses=0008 0009
09:18:40 Msec=750  True Az=112.995  Ze=-44.82  Az status=0008  Ze status=0009
09:18:41 Check angles
09:18:41 SkyScan query
09:18:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.76<-16384  Statuses=0008 0009
09:18:41 Msec=1500  True Az=112.995  Ze=-65.76  Az status=0008  Ze status=0009
09:18:41 Check angles
09:18:41 SkyScan query
09:18:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
09:18:42 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
09:18:42 Check angles
09:18:42 SkyScan query
09:18:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
09:18:43 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
09:18:43 Check angles
09:18:43 SkyScan query
09:18:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.61<-20574  Statuses=0008 0009
09:18:43 Msec=3750  True Az=112.995  Ze=-128.61  Az status=0008  Ze status=0009
09:18:44 Check angles
09:18:44 SkyScan query
09:18:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.58<-21972  Statuses=0008 0009
09:18:44 Msec=4500  True Az=112.995  Ze=-149.58  Az status=0008  Ze status=0009
09:18:44 Check angles
09:18:44 SkyScan query
09:18:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.505<-23367  Statuses=0008 0009
09:18:45 Msec=5250  True Az=112.995  Ze=-170.505  Az status=0008  Ze status=0009
09:18:45 Check angles
09:18:45 SkyScan query
09:18:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:18:46 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:18:46 Message to Master queued w/err=0: serial=351363 error=0
09:18:51 Received message from Master: op=Filter serial=351364
09:18:51 Color wheel filter change from 0 to 0
09:18:51 FLIGetFilterPos err=0  currentPosition=0
09:18:51 FLIGetStepsRemaining err=0  RemainingSteps=0
09:18:51 Filter is already there-color wheel unchanged
09:18:51 Received message from Master: op=Shutter serial=351365
09:18:51 Shutter LASER open
09:18:51 Received message from Camera: op=State serial=351367
09:18:51 GetSingleValue result=40  Value=cccccccc
09:18:51 SkyScan query
09:18:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:18:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:52 Parameters OK
09:18:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:52 Set A/D data flow result=40
09:18:52 Set A/D channel type result=40
09:18:52 Set A/D encoding result=40
09:18:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:52 Set channel filter=0.000000e+000  result=40
09:18:52 Config A/D  Result=40
09:18:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:52 Get A/D filter: -9.255963e+061  result=40
09:18:52 Get A/D value=-858993460  result=40
09:18:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:52 Parameters OK
09:18:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:52 Set A/D data flow result=40
09:18:52 Set A/D channel type result=40
09:18:52 Set A/D encoding result=40
09:18:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:52 Set channel filter=0.000000e+000  result=40
09:18:52 Config A/D  Result=40
09:18:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:52 Get A/D filter: -9.255963e+061  result=40
09:18:52 Get A/D value=-858993460  result=40
09:18:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:18:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:18:52 Aux=
09:18:52 Message to Camera, serial 351367 queued
09:19:00 Received message from Master: op=Shutter serial=351377
09:19:00 Shutter LASER close
09:19:01 Received message from Master: op=PointingHead serial=351381
09:19:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:19:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:19:01 Point started: ret=0
09:19:01 point_skyscan result=0
09:19:02 Check angles
09:19:02 SkyScan query
09:19:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.25<-21550  Statuses=0008 0009
09:19:02 Msec=0  True Az=112.995  Ze=-143.25  Az status=0008  Ze status=0009
09:19:02 Check angles
09:19:02 SkyScan query
09:19:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.19<-20146  Statuses=0008 0009
09:19:03 Msec=750  True Az=112.995  Ze=-122.19  Az status=0008  Ze status=0009
09:19:03 Check angles
09:19:03 SkyScan query
09:19:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.92<-18728  Statuses=0008 0009
09:19:04 Msec=1500  True Az=112.995  Ze=-100.92  Az status=0008  Ze status=0009
09:19:04 Check angles
09:19:04 SkyScan query
09:19:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.965<-17331  Statuses=0008 0009
09:19:04 Msec=2250  True Az=112.995  Ze=-79.965  Az status=0008  Ze status=0009
09:19:05 Check angles
09:19:05 SkyScan query
09:19:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.545<-15903  Statuses=0008 0009
09:19:05 Msec=3000  True Az=112.995  Ze=-58.545  Az status=0008  Ze status=0009
09:19:05 Check angles
09:19:05 SkyScan query
09:19:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
09:19:06 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
09:19:06 Check angles
09:19:06 SkyScan query
09:19:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.65<-13110  Statuses=0008 0009
09:19:07 Msec=4500  True Az=112.995  Ze=-16.65  Az status=0008  Ze status=0009
09:19:07 Check angles
09:19:07 SkyScan query
09:19:07 SkyScan query done: ret=0  az=112.995<-7533  ze=4.605<-11693  Statuses=0008 0009
09:19:07 Msec=5250  True Az=112.995  Ze=4.605  Az status=0008  Ze status=0009
09:19:08 Check angles
09:19:08 SkyScan query
09:19:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:19:08 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:19:08 Message to Master queued w/err=0: serial=351381 error=0
09:19:13 Received message from Master: op=Filter serial=351382
09:19:13 Color wheel filter change from 0 to 0
09:19:13 FLIGetFilterPos err=0  currentPosition=0
09:19:13 FLIGetStepsRemaining err=0  RemainingSteps=0
09:19:13 Filter is already there-color wheel unchanged
09:19:13 Received message from Master: op=Shutter serial=351383
09:19:13 Shutter LASER close
09:19:14 Received message from Camera: op=State serial=351385
09:19:14 GetSingleValue result=40  Value=cccccccc
09:19:14 SkyScan query
09:19:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:19:14 Parameters OK
09:19:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:19:14 Set A/D data flow result=40
09:19:14 Set A/D channel type result=40
09:19:14 Set A/D encoding result=40
09:19:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:19:14 Set channel filter=0.000000e+000  result=40
09:19:14 Config A/D  Result=40
09:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:19:14 Get A/D filter: -9.255963e+061  result=40
09:19:14 Get A/D value=-858993460  result=40
09:19:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:19:14 Parameters OK
09:19:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:19:14 Set A/D data flow result=40
09:19:14 Set A/D channel type result=40
09:19:14 Set A/D encoding result=40
09:19:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:19:14 Set channel filter=0.000000e+000  result=40
09:19:14 Config A/D  Result=40
09:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:19:14 Get A/D filter: -9.255963e+061  result=40
09:19:14 Get A/D value=-858993460  result=40
09:19:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:19:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:19:14 Aux=
09:19:14 Message to Camera, serial 351385 queued
09:19:51 Received message from Master: op=PointingHead serial=351398
09:19:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:19:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:19:51 Point started: ret=0
09:19:51 point_skyscan result=0
09:19:52 Check angles
09:19:52 SkyScan query
09:19:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:19:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:19:53 Message to Master queued w/err=0: serial=351398 error=0
09:19:58 Received message from Master: op=Filter serial=351399
09:19:58 Color wheel filter change from 0 to 0
09:19:58 FLIGetFilterPos err=0  currentPosition=0
09:19:58 FLIGetStepsRemaining err=0  RemainingSteps=0
09:19:58 Filter is already there-color wheel unchanged
09:19:58 Received message from Master: op=Shutter serial=351400
09:19:58 Shutter LASER close
09:19:58 Received message from Camera: op=State serial=351402
09:19:58 GetSingleValue result=40  Value=cccccccc
09:19:58 SkyScan query
09:19:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:19:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:19:58 Parameters OK
09:19:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:19:58 Set A/D data flow result=40
09:19:58 Set A/D channel type result=40
09:19:58 Set A/D encoding result=40
09:19:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:19:58 Set channel filter=0.000000e+000  result=40
09:19:58 Config A/D  Result=40
09:19:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:19:58 Get A/D filter: -9.255963e+061  result=40
09:19:58 Get A/D value=-858993460  result=40
09:19:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:19:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:19:58 Parameters OK
09:19:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:19:58 Set A/D data flow result=40
09:19:58 Set A/D channel type result=40
09:19:58 Set A/D encoding result=40
09:19:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:19:58 Set channel filter=0.000000e+000  result=40
09:19:58 Config A/D  Result=40
09:19:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:19:58 Get A/D filter: -9.255963e+061  result=40
09:19:58 Get A/D value=-858993460  result=40
09:19:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:19:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:19:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:19:58 Aux=
09:19:58 Message to Camera, serial 351402 queued
09:20:35 Received message from Master: op=PointingHead serial=351415
09:20:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:20:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:20:36 Point started: ret=0
09:20:36 point_skyscan result=0
09:20:36 Check angles
09:20:36 SkyScan query
09:20:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:20:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:20:37 Message to Master queued w/err=0: serial=351415 error=0
09:20:42 Received message from Master: op=Filter serial=351416
09:20:42 Color wheel filter change from 0 to 0
09:20:42 FLIGetFilterPos err=0  currentPosition=0
09:20:42 FLIGetStepsRemaining err=0  RemainingSteps=0
09:20:42 Filter is already there-color wheel unchanged
09:20:42 Received message from Master: op=Shutter serial=351417
09:20:42 Shutter LASER close
09:20:42 Received message from Camera: op=State serial=351419
09:20:42 GetSingleValue result=40  Value=cccccccc
09:20:42 SkyScan query
09:20:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:20:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:20:43 Parameters OK
09:20:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:20:43 Set A/D data flow result=40
09:20:43 Set A/D channel type result=40
09:20:43 Set A/D encoding result=40
09:20:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:20:43 Set channel filter=0.000000e+000  result=40
09:20:43 Config A/D  Result=40
09:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:20:43 Get A/D filter: -9.255963e+061  result=40
09:20:43 Get A/D value=-858993460  result=40
09:20:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:20:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:20:43 Parameters OK
09:20:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:20:43 Set A/D data flow result=40
09:20:43 Set A/D channel type result=40
09:20:43 Set A/D encoding result=40
09:20:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:20:43 Set channel filter=0.000000e+000  result=40
09:20:43 Config A/D  Result=40
09:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:20:43 Get A/D filter: -9.255963e+061  result=40
09:20:43 Get A/D value=-858993460  result=40
09:20:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:20:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:20:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:20:43 Aux=
09:20:43 Message to Camera, serial 351419 queued
09:21:19 Received message from Master: op=PointingHead serial=351431
09:21:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:21:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:21:20 Point started: ret=0
09:21:20 point_skyscan result=0
09:21:21 Check angles
09:21:21 SkyScan query
09:21:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:21:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:21:21 Message to Master queued w/err=0: serial=351431 error=0
09:21:26 Received message from Master: op=Filter serial=351432
09:21:26 Color wheel filter change from 0 to 0
09:21:26 FLIGetFilterPos err=0  currentPosition=0
09:21:26 FLIGetStepsRemaining err=0  RemainingSteps=0
09:21:26 Filter is already there-color wheel unchanged
09:21:27 Received message from Master: op=Shutter serial=351433
09:21:27 Shutter LASER close
09:21:27 Received message from Camera: op=State serial=351435
09:21:27 GetSingleValue result=40  Value=cccccccc
09:21:27 SkyScan query
09:21:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:21:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:21:28 Parameters OK
09:21:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:21:28 Set A/D data flow result=40
09:21:28 Set A/D channel type result=40
09:21:28 Set A/D encoding result=40
09:21:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:21:28 Set channel filter=0.000000e+000  result=40
09:21:28 Config A/D  Result=40
09:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:21:28 Get A/D filter: -9.255963e+061  result=40
09:21:28 Get A/D value=-858993460  result=40
09:21:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:21:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:21:28 Parameters OK
09:21:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:21:28 Set A/D data flow result=40
09:21:28 Set A/D channel type result=40
09:21:28 Set A/D encoding result=40
09:21:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:21:28 Set channel filter=0.000000e+000  result=40
09:21:28 Config A/D  Result=40
09:21:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:21:28 Get A/D filter: -9.255963e+061  result=40
09:21:28 Get A/D value=-858993460  result=40
09:21:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:21:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:21:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:21:28 Aux=
09:21:28 Message to Camera, serial 351435 queued
09:22:05 Received message from Master: op=PointingHead serial=351447
09:22:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:22:05 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:22:05 Point started: ret=0
09:22:05 point_skyscan result=0
09:22:06 Check angles
09:22:06 SkyScan query
09:22:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-24.405<-13627  Statuses=0008 0009
09:22:06 Msec=0  True Az=112.995  Ze=-24.405  Az status=0008  Ze status=0009
09:22:06 Check angles
09:22:06 SkyScan query
09:22:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.325<-14955  Statuses=0008 0009
09:22:07 Msec=750  True Az=112.995  Ze=-44.325  Az status=0008  Ze status=0009
09:22:07 Check angles
09:22:07 SkyScan query
09:22:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.85<-16390  Statuses=0008 0009
09:22:08 Msec=1500  True Az=112.995  Ze=-65.85  Az status=0008  Ze status=0009
09:22:08 Check angles
09:22:08 SkyScan query
09:22:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.655<-17777  Statuses=0008 0009
09:22:09 Msec=2250  True Az=112.995  Ze=-86.655  Az status=0008  Ze status=0009
09:22:09 Check angles
09:22:09 SkyScan query
09:22:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.465<-19231  Statuses=0008 0009
09:22:09 Msec=3000  True Az=112.995  Ze=-108.465  Az status=0008  Ze status=0009
09:22:09 Check angles
09:22:09 SkyScan query
09:22:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.225<-20615  Statuses=0008 0009
09:22:10 Msec=3750  True Az=112.995  Ze=-129.225  Az status=0008  Ze status=0009
09:22:10 Check angles
09:22:10 SkyScan query
09:22:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.075<-22005  Statuses=0008 0009
09:22:11 Msec=4500  True Az=112.995  Ze=-150.075  Az status=0008  Ze status=0009
09:22:11 Check angles
09:22:11 SkyScan query
09:22:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.285<-23419  Statuses=0008 0009
09:22:12 Msec=5250  True Az=112.995  Ze=-171.285  Az status=0008  Ze status=0009
09:22:12 Check angles
09:22:12 SkyScan query
09:22:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:22:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:22:12 Message to Master queued w/err=0: serial=351447 error=0
09:22:18 Received message from Master: op=Filter serial=351448
09:22:18 Color wheel filter change from 0 to 0
09:22:18 FLIGetFilterPos err=0  currentPosition=0
09:22:18 FLIGetStepsRemaining err=0  RemainingSteps=0
09:22:18 Filter is already there-color wheel unchanged
09:22:18 Received message from Master: op=Shutter serial=351449
09:22:18 Shutter LASER open
09:22:19 Received message from Camera: op=State serial=351451
09:22:19 GetSingleValue result=40  Value=cccccccc
09:22:19 SkyScan query
09:22:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:22:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:19 Parameters OK
09:22:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:19 Set A/D data flow result=40
09:22:19 Set A/D channel type result=40
09:22:19 Set A/D encoding result=40
09:22:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:19 Set channel filter=0.000000e+000  result=40
09:22:19 Config A/D  Result=40
09:22:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:19 Get A/D filter: -9.255963e+061  result=40
09:22:19 Get A/D value=-858993460  result=40
09:22:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:19 Parameters OK
09:22:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:19 Set A/D data flow result=40
09:22:19 Set A/D channel type result=40
09:22:19 Set A/D encoding result=40
09:22:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:19 Set channel filter=0.000000e+000  result=40
09:22:19 Config A/D  Result=40
09:22:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:19 Get A/D filter: -9.255963e+061  result=40
09:22:19 Get A/D value=-858993460  result=40
09:22:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:22:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:22:19 Aux=
09:22:19 Message to Camera, serial 351451 queued
09:22:27 Received message from Master: op=Shutter serial=351460
09:22:27 Shutter LASER close
09:22:29 Received message from Master: op=PointingHead serial=351464
09:22:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:22:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:22:29 Point started: ret=0
09:22:29 point_skyscan result=0
09:22:30 Check angles
09:22:30 SkyScan query
09:22:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
09:22:31 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
09:22:31 Check angles
09:22:31 SkyScan query
09:22:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.175<-20145  Statuses=0008 0009
09:22:31 Msec=750  True Az=112.995  Ze=-122.175  Az status=0008  Ze status=0009
09:22:32 Check angles
09:22:32 SkyScan query
09:22:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.175<-18745  Statuses=0008 0009
09:22:32 Msec=1500  True Az=112.995  Ze=-101.175  Az status=0008  Ze status=0009
09:22:32 Check angles
09:22:32 SkyScan query
09:22:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
09:22:33 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
09:22:33 Check angles
09:22:33 SkyScan query
09:22:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.385<-15959  Statuses=0008 0009
09:22:34 Msec=3000  True Az=112.995  Ze=-59.385  Az status=0008  Ze status=0009
09:22:34 Check angles
09:22:34 SkyScan query
09:22:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.34<-14556  Statuses=0008 0009
09:22:34 Msec=3750  True Az=112.995  Ze=-38.34  Az status=0008  Ze status=0009
09:22:35 Check angles
09:22:35 SkyScan query
09:22:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.49<-13166  Statuses=0008 0009
09:22:35 Msec=4500  True Az=112.995  Ze=-17.49  Az status=0008  Ze status=0009
09:22:35 Check angles
09:22:35 SkyScan query
09:22:36 SkyScan query done: ret=0  az=112.995<-7533  ze=3.945<-11737  Statuses=0008 0009
09:22:36 Msec=5250  True Az=112.995  Ze=3.945  Az status=0008  Ze status=0009
09:22:36 Check angles
09:22:36 SkyScan query
09:22:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:22:37 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:22:37 Message to Master queued w/err=0: serial=351464 error=0
09:22:42 Received message from Master: op=Filter serial=351465
09:22:42 Color wheel filter change from 0 to 0
09:22:42 FLIGetFilterPos err=0  currentPosition=0
09:22:42 FLIGetStepsRemaining err=0  RemainingSteps=0
09:22:42 Filter is already there-color wheel unchanged
09:22:42 Received message from Master: op=Shutter serial=351466
09:22:42 Shutter LASER close
09:22:43 Received message from Camera: op=State serial=351468
09:22:43 GetSingleValue result=40  Value=cccccccc
09:22:43 SkyScan query
09:22:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:43 Parameters OK
09:22:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:43 Set A/D data flow result=40
09:22:43 Set A/D channel type result=40
09:22:43 Set A/D encoding result=40
09:22:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:43 Set channel filter=0.000000e+000  result=40
09:22:43 Config A/D  Result=40
09:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:43 Get A/D filter: -9.255963e+061  result=40
09:22:43 Get A/D value=-858993460  result=40
09:22:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:43 Parameters OK
09:22:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:44 Set A/D data flow result=40
09:22:44 Set A/D channel type result=40
09:22:44 Set A/D encoding result=40
09:22:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:44 Set channel filter=0.000000e+000  result=40
09:22:44 Config A/D  Result=40
09:22:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:44 Get A/D filter: -9.255963e+061  result=40
09:22:44 Get A/D value=-858993460  result=40
09:22:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:22:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:22:44 Aux=
09:22:44 Message to Camera, serial 351468 queued
09:23:20 Received message from Master: op=PointingHead serial=351480
09:23:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:23:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:23:21 Point started: ret=0
09:23:21 point_skyscan result=0
09:23:21 Check angles
09:23:21 SkyScan query
09:23:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:23:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:23:22 Message to Master queued w/err=0: serial=351480 error=0
09:23:27 Received message from Master: op=Filter serial=351481
09:23:27 Color wheel filter change from 0 to 0
09:23:27 FLIGetFilterPos err=0  currentPosition=0
09:23:27 FLIGetStepsRemaining err=0  RemainingSteps=0
09:23:27 Filter is already there-color wheel unchanged
09:23:28 Received message from Master: op=Shutter serial=351482
09:23:28 Shutter LASER close
09:23:28 Received message from Camera: op=State serial=351484
09:23:28 GetSingleValue result=40  Value=cccccccc
09:23:28 SkyScan query
09:23:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:23:29 Parameters OK
09:23:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:23:29 Set A/D data flow result=40
09:23:29 Set A/D channel type result=40
09:23:29 Set A/D encoding result=40
09:23:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:23:29 Set channel filter=0.000000e+000  result=40
09:23:29 Config A/D  Result=40
09:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:23:29 Get A/D filter: -9.255963e+061  result=40
09:23:29 Get A/D value=-858993460  result=40
09:23:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:23:29 Parameters OK
09:23:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:23:29 Set A/D data flow result=40
09:23:29 Set A/D channel type result=40
09:23:29 Set A/D encoding result=40
09:23:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:23:29 Set channel filter=0.000000e+000  result=40
09:23:29 Config A/D  Result=40
09:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:23:29 Get A/D filter: -9.255963e+061  result=40
09:23:29 Get A/D value=-858993460  result=40
09:23:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:23:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:23:29 Aux=
09:23:29 Message to Camera, serial 351484 queued
[UTC 2019-3-19  09:23:48]
09:24:06 Received message from Master: op=PointingHead serial=351496
09:24:06 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:24:06 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:24:06 Point started: ret=0
09:24:06 point_skyscan result=0
09:24:07 Check angles
09:24:07 SkyScan query
09:24:07 SkyScan query done: ret=0  az=137.325<-9155  ze=-6.51<-12434  Statuses=0009 0008
09:24:07 Msec=0  True Az=137.325  Ze=-6.51  Az status=0009  Ze status=0008
09:24:08 Check angles
09:24:08 SkyScan query
09:24:08 SkyScan query done: ret=0  az=154.14<-10276  ze=-6.495<-12433  Statuses=0009 0008
09:24:08 Msec=750  True Az=154.14  Ze=-6.495  Az status=0009  Ze status=0008
09:24:08 Check angles
09:24:08 SkyScan query
09:24:09 SkyScan query done: ret=0  az=171.675<-11445  ze=-6.495<-12433  Statuses=0009 0008
09:24:09 Msec=1500  True Az=171.675  Ze=-6.495  Az status=0009  Ze status=0008
09:24:09 Check angles
09:24:09 SkyScan query
09:24:10 SkyScan query done: ret=0  az=175.98<-11732  ze=-6.495<-12433  Statuses=0008 0008
09:24:10 Msec=2250  True Az=175.98  Ze=-6.495  Az status=0008  Ze status=0008
09:24:10 Message to Master queued w/err=0: serial=351496 error=0
09:24:15 Received message from Master: op=Filter serial=351497
09:24:15 Color wheel filter change from 0 to 0
09:24:15 FLIGetFilterPos err=0  currentPosition=0
09:24:15 FLIGetStepsRemaining err=0  RemainingSteps=0
09:24:15 Filter is already there-color wheel unchanged
09:24:15 Received message from Master: op=Shutter serial=351498
09:24:15 Shutter LASER close
09:24:16 Received message from Camera: op=State serial=351500
09:24:16 GetSingleValue result=40  Value=cccccccc
09:24:16 SkyScan query
09:24:16 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:24:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:24:16 Parameters OK
09:24:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:24:16 Set A/D data flow result=40
09:24:16 Set A/D channel type result=40
09:24:16 Set A/D encoding result=40
09:24:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:24:16 Set channel filter=0.000000e+000  result=40
09:24:16 Config A/D  Result=40
09:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:24:16 Get A/D filter: -9.255963e+061  result=40
09:24:16 Get A/D value=-858993460  result=40
09:24:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:24:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:24:16 Parameters OK
09:24:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:24:16 Set A/D data flow result=40
09:24:16 Set A/D channel type result=40
09:24:16 Set A/D encoding result=40
09:24:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:24:16 Set channel filter=0.000000e+000  result=40
09:24:16 Config A/D  Result=40
09:24:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:24:16 Get A/D filter: -9.255963e+061  result=40
09:24:16 Get A/D value=-858993460  result=40
09:24:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:24:16 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:24:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:24:16 Aux=
09:24:16 Message to Camera, serial 351500 queued
09:24:53 Received message from Master: op=PointingHead serial=351512
09:24:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:24:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:24:53 Point started: ret=0
09:24:53 point_skyscan result=0
09:24:54 Check angles
09:24:54 SkyScan query
09:24:55 SkyScan query done: ret=0  az=151.8<-10120  ze=6.51<-11566  Statuses=0009 0008
09:24:55 Msec=0  True Az=151.8  Ze=6.51  Az status=0009  Ze status=0008
09:24:55 Check angles
09:24:55 SkyScan query
09:24:55 SkyScan query done: ret=0  az=134.415<-8961  ze=6.495<-11567  Statuses=0009 0008
09:24:55 Msec=750  True Az=134.415  Ze=6.495  Az status=0009  Ze status=0008
09:24:56 Check angles
09:24:56 SkyScan query
09:24:56 SkyScan query done: ret=0  az=116.865<-7791  ze=6.495<-11567  Statuses=0009 0008
09:24:56 Msec=1500  True Az=116.865  Ze=6.495  Az status=0009  Ze status=0008
09:24:56 Check angles
09:24:56 SkyScan query
09:24:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:24:57 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:24:57 Message to Master queued w/err=0: serial=351512 error=0
09:25:02 Received message from Master: op=Filter serial=351513
09:25:02 Color wheel filter change from 0 to 0
09:25:02 FLIGetFilterPos err=0  currentPosition=0
09:25:02 FLIGetStepsRemaining err=0  RemainingSteps=0
09:25:02 Filter is already there-color wheel unchanged
09:25:03 Received message from Master: op=Shutter serial=351514
09:25:03 Shutter LASER close
09:25:03 Received message from Camera: op=State serial=351516
09:25:03 GetSingleValue result=40  Value=cccccccc
09:25:03 SkyScan query
09:25:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:03 Parameters OK
09:25:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:03 Set A/D data flow result=40
09:25:03 Set A/D channel type result=40
09:25:03 Set A/D encoding result=40
09:25:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:03 Set channel filter=0.000000e+000  result=40
09:25:03 Config A/D  Result=40
09:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:03 Get A/D filter: -9.255963e+061  result=40
09:25:03 Get A/D value=-858993460  result=40
09:25:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:03 Parameters OK
09:25:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:03 Set A/D data flow result=40
09:25:03 Set A/D channel type result=40
09:25:03 Set A/D encoding result=40
09:25:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:03 Set channel filter=0.000000e+000  result=40
09:25:03 Config A/D  Result=40
09:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:03 Get A/D filter: -9.255963e+061  result=40
09:25:03 Get A/D value=-858993460  result=40
09:25:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:25:03 Aux=
09:25:03 Message to Camera, serial 351516 queued
09:25:40 Received message from Master: op=PointingHead serial=351528
09:25:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:25:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:25:41 Point started: ret=0
09:25:41 point_skyscan result=0
09:25:42 Check angles
09:25:42 SkyScan query
09:25:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
09:25:42 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
09:25:42 Check angles
09:25:42 SkyScan query
09:25:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.64<-14976  Statuses=0008 0009
09:25:43 Msec=750  True Az=112.995  Ze=-44.64  Az status=0008  Ze status=0009
09:25:43 Check angles
09:25:43 SkyScan query
09:25:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
09:25:44 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
09:25:44 Check angles
09:25:44 SkyScan query
09:25:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.18<-17812  Statuses=0008 0009
09:25:44 Msec=2250  True Az=112.995  Ze=-87.18  Az status=0008  Ze status=0009
09:25:45 Check angles
09:25:45 SkyScan query
09:25:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.73<-19182  Statuses=0008 0009
09:25:45 Msec=3000  True Az=112.995  Ze=-107.73  Az status=0008  Ze status=0009
09:25:45 Check angles
09:25:45 SkyScan query
09:25:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.295<-20553  Statuses=0008 0009
09:25:46 Msec=3750  True Az=112.995  Ze=-128.295  Az status=0008  Ze status=0009
09:25:46 Check angles
09:25:46 SkyScan query
09:25:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.235<-21949  Statuses=0008 0009
09:25:47 Msec=4500  True Az=112.995  Ze=-149.235  Az status=0008  Ze status=0009
09:25:47 Check angles
09:25:47 SkyScan query
09:25:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.145<-23343  Statuses=0008 0009
09:25:47 Msec=5250  True Az=112.995  Ze=-170.145  Az status=0008  Ze status=0009
09:25:48 Check angles
09:25:48 SkyScan query
09:25:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:25:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:25:48 Message to Master queued w/err=0: serial=351528 error=0
09:25:53 Received message from Master: op=Filter serial=351529
09:25:53 Color wheel filter change from 0 to 0
09:25:53 FLIGetFilterPos err=0  currentPosition=0
09:25:53 FLIGetStepsRemaining err=0  RemainingSteps=0
09:25:53 Filter is already there-color wheel unchanged
09:25:54 Received message from Master: op=Shutter serial=351530
09:25:54 Shutter LASER open
09:25:54 Received message from Camera: op=State serial=351532
09:25:54 GetSingleValue result=40  Value=cccccccc
09:25:54 SkyScan query
09:25:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:25:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:55 Parameters OK
09:25:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:55 Set A/D data flow result=40
09:25:55 Set A/D channel type result=40
09:25:55 Set A/D encoding result=40
09:25:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:55 Set channel filter=0.000000e+000  result=40
09:25:55 Config A/D  Result=40
09:25:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:55 Get A/D filter: -9.255963e+061  result=40
09:25:55 Get A/D value=-858993460  result=40
09:25:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:55 Parameters OK
09:25:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:55 Set A/D data flow result=40
09:25:55 Set A/D channel type result=40
09:25:55 Set A/D encoding result=40
09:25:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:55 Set channel filter=0.000000e+000  result=40
09:25:55 Config A/D  Result=40
09:25:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:55 Get A/D filter: -9.255963e+061  result=40
09:25:55 Get A/D value=-858993460  result=40
09:25:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:25:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:25:55 Aux=
09:25:55 Message to Camera, serial 351532 queued
09:26:03 Received message from Master: op=Shutter serial=351541
09:26:03 Shutter LASER close
09:26:04 Received message from Master: op=PointingHead serial=351545
09:26:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:26:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:26:04 Point started: ret=0
09:26:04 point_skyscan result=0
09:26:05 Check angles
09:26:05 SkyScan query
09:26:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.8<-21520  Statuses=0008 0009
09:26:06 Msec=0  True Az=112.995  Ze=-142.8  Az status=0008  Ze status=0009
09:26:06 Check angles
09:26:06 SkyScan query
09:26:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.515<-20101  Statuses=0008 0009
09:26:06 Msec=750  True Az=112.995  Ze=-121.515  Az status=0008  Ze status=0009
09:26:07 Check angles
09:26:07 SkyScan query
09:26:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.575<-18705  Statuses=0008 0009
09:26:07 Msec=1500  True Az=112.995  Ze=-100.575  Az status=0008  Ze status=0009
09:26:07 Check angles
09:26:07 SkyScan query
09:26:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
09:26:08 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
09:26:08 Check angles
09:26:08 SkyScan query
09:26:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.635<-15909  Statuses=0008 0009
09:26:09 Msec=3000  True Az=112.995  Ze=-58.635  Az status=0008  Ze status=0009
09:26:09 Check angles
09:26:09 SkyScan query
09:26:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
09:26:09 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
09:26:10 Check angles
09:26:10 SkyScan query
09:26:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.65<-13110  Statuses=0008 0009
09:26:10 Msec=4500  True Az=112.995  Ze=-16.65  Az status=0008  Ze status=0009
09:26:10 Check angles
09:26:10 SkyScan query
09:26:11 SkyScan query done: ret=0  az=112.995<-7533  ze=4.32<-11712  Statuses=0008 0009
09:26:11 Msec=5250  True Az=112.995  Ze=4.32  Az status=0008  Ze status=0009
09:26:11 Check angles
09:26:11 SkyScan query
09:26:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:26:12 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:26:12 Message to Master queued w/err=0: serial=351545 error=0
09:26:17 Received message from Master: op=Filter serial=351546
09:26:17 Color wheel filter change from 0 to 0
09:26:17 FLIGetFilterPos err=0  currentPosition=0
09:26:17 FLIGetStepsRemaining err=0  RemainingSteps=0
09:26:17 Filter is already there-color wheel unchanged
09:26:18 Received message from Master: op=Shutter serial=351547
09:26:18 Shutter LASER close
09:26:18 Received message from Camera: op=State serial=351549
09:26:18 GetSingleValue result=40  Value=cccccccc
09:26:18 SkyScan query
09:26:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:26:19 Parameters OK
09:26:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:26:19 Set A/D data flow result=40
09:26:19 Set A/D channel type result=40
09:26:19 Set A/D encoding result=40
09:26:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:26:19 Set channel filter=0.000000e+000  result=40
09:26:19 Config A/D  Result=40
09:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:26:19 Get A/D filter: -9.255963e+061  result=40
09:26:19 Get A/D value=-858993460  result=40
09:26:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:26:19 Parameters OK
09:26:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:26:19 Set A/D data flow result=40
09:26:19 Set A/D channel type result=40
09:26:19 Set A/D encoding result=40
09:26:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:26:19 Set channel filter=0.000000e+000  result=40
09:26:19 Config A/D  Result=40
09:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:26:19 Get A/D filter: -9.255963e+061  result=40
09:26:19 Get A/D value=-858993460  result=40
09:26:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:26:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:26:19 Aux=
09:26:19 Message to Camera, serial 351549 queued
09:26:56 Received message from Master: op=PointingHead serial=351561
09:26:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:26:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:26:56 Point started: ret=0
09:26:56 point_skyscan result=0
09:26:57 Check angles
09:26:57 SkyScan query
09:26:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:26:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:26:58 Message to Master queued w/err=0: serial=351561 error=0
09:27:03 Received message from Master: op=Filter serial=351562
09:27:03 Color wheel filter change from 0 to 0
09:27:03 FLIGetFilterPos err=0  currentPosition=0
09:27:03 FLIGetStepsRemaining err=0  RemainingSteps=0
09:27:03 Filter is already there-color wheel unchanged
09:27:03 Received message from Master: op=Shutter serial=351563
09:27:03 Shutter LASER close
09:27:04 Received message from Camera: op=State serial=351565
09:27:04 GetSingleValue result=40  Value=cccccccc
09:27:04 SkyScan query
09:27:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:27:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:04 Parameters OK
09:27:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:04 Set A/D data flow result=40
09:27:04 Set A/D channel type result=40
09:27:04 Set A/D encoding result=40
09:27:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:04 Set channel filter=0.000000e+000  result=40
09:27:04 Config A/D  Result=40
09:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:04 Get A/D filter: -9.255963e+061  result=40
09:27:04 Get A/D value=-858993460  result=40
09:27:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:04 Parameters OK
09:27:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:04 Set A/D data flow result=40
09:27:04 Set A/D channel type result=40
09:27:04 Set A/D encoding result=40
09:27:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:04 Set channel filter=0.000000e+000  result=40
09:27:04 Config A/D  Result=40
09:27:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:04 Get A/D filter: -9.255963e+061  result=40
09:27:04 Get A/D value=-858993460  result=40
09:27:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:27:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:27:04 Aux=
09:27:04 Message to Camera, serial 351565 queued
09:27:41 Received message from Master: op=PointingHead serial=351577
09:27:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:27:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:27:41 Point started: ret=0
09:27:41 point_skyscan result=0
09:27:42 Check angles
09:27:42 SkyScan query
09:27:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:27:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:27:43 Message to Master queued w/err=0: serial=351577 error=0
09:27:48 Received message from Master: op=Filter serial=351578
09:27:48 Color wheel filter change from 0 to 0
09:27:48 FLIGetFilterPos err=0  currentPosition=0
09:27:48 FLIGetStepsRemaining err=0  RemainingSteps=0
09:27:48 Filter is already there-color wheel unchanged
09:27:48 Received message from Master: op=Shutter serial=351579
09:27:48 Shutter LASER close
09:27:49 Received message from Camera: op=State serial=351581
09:27:49 GetSingleValue result=40  Value=cccccccc
09:27:49 SkyScan query
09:27:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:27:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:49 Parameters OK
09:27:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:49 Set A/D data flow result=40
09:27:49 Set A/D channel type result=40
09:27:49 Set A/D encoding result=40
09:27:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:49 Set channel filter=0.000000e+000  result=40
09:27:49 Config A/D  Result=40
09:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:49 Get A/D filter: -9.255963e+061  result=40
09:27:49 Get A/D value=-858993460  result=40
09:27:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:49 Parameters OK
09:27:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:49 Set A/D data flow result=40
09:27:49 Set A/D channel type result=40
09:27:49 Set A/D encoding result=40
09:27:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:49 Set channel filter=0.000000e+000  result=40
09:27:49 Config A/D  Result=40
09:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:49 Get A/D filter: -9.255963e+061  result=40
09:27:49 Get A/D value=-858993460  result=40
09:27:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:27:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:27:49 Aux=
09:27:49 Message to Camera, serial 351581 queued
09:28:25 Received message from Master: op=PointingHead serial=351593
09:28:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:28:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:28:26 Point started: ret=0
09:28:26 point_skyscan result=0
09:28:27 Check angles
09:28:27 SkyScan query
09:28:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:28:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:28:27 Message to Master queued w/err=0: serial=351593 error=0
09:28:32 Received message from Master: op=Filter serial=351594
09:28:32 Color wheel filter change from 0 to 0
09:28:32 FLIGetFilterPos err=0  currentPosition=0
09:28:32 FLIGetStepsRemaining err=0  RemainingSteps=0
09:28:32 Filter is already there-color wheel unchanged
09:28:33 Received message from Master: op=Shutter serial=351595
09:28:33 Shutter LASER close
09:28:33 Received message from Camera: op=State serial=351597
09:28:33 GetSingleValue result=40  Value=cccccccc
09:28:33 SkyScan query
09:28:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:28:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:28:33 Parameters OK
09:28:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:28:33 Set A/D data flow result=40
09:28:33 Set A/D channel type result=40
09:28:33 Set A/D encoding result=40
09:28:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:28:33 Set channel filter=0.000000e+000  result=40
09:28:33 Config A/D  Result=40
09:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:28:33 Get A/D filter: -9.255963e+061  result=40
09:28:33 Get A/D value=-858993460  result=40
09:28:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:28:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:28:33 Parameters OK
09:28:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:28:33 Set A/D data flow result=40
09:28:33 Set A/D channel type result=40
09:28:33 Set A/D encoding result=40
09:28:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:28:33 Set channel filter=0.000000e+000  result=40
09:28:33 Config A/D  Result=40
09:28:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:28:33 Get A/D filter: -9.255963e+061  result=40
09:28:33 Get A/D value=-858993460  result=40
09:28:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:28:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:28:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:28:33 Aux=
09:28:33 Message to Camera, serial 351597 queued
09:29:10 Received message from Master: op=PointingHead serial=351609
09:29:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:29:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:29:10 Point started: ret=0
09:29:10 point_skyscan result=0
09:29:11 Check angles
09:29:11 SkyScan query
09:29:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
09:29:11 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
09:29:11 Check angles
09:29:11 SkyScan query
09:29:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
09:29:12 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
09:29:12 Check angles
09:29:12 SkyScan query
09:29:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.265<-16351  Statuses=0008 0009
09:29:13 Msec=1500  True Az=112.995  Ze=-65.265  Az status=0008  Ze status=0009
09:29:13 Check angles
09:29:13 SkyScan query
09:29:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.55<-17770  Statuses=0008 0009
09:29:13 Msec=2250  True Az=112.995  Ze=-86.55  Az status=0008  Ze status=0009
09:29:14 Check angles
09:29:14 SkyScan query
09:29:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.595<-19173  Statuses=0008 0009
09:29:14 Msec=3000  True Az=112.995  Ze=-107.595  Az status=0008  Ze status=0009
09:29:14 Check angles
09:29:14 SkyScan query
09:29:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.55<-20570  Statuses=0008 0009
09:29:15 Msec=3750  True Az=112.995  Ze=-128.55  Az status=0008  Ze status=0009
09:29:15 Check angles
09:29:15 SkyScan query
09:29:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.52<-21968  Statuses=0008 0009
09:29:16 Msec=4500  True Az=112.995  Ze=-149.52  Az status=0008  Ze status=0009
09:29:16 Check angles
09:29:16 SkyScan query
09:29:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.46<-23364  Statuses=0008 0009
09:29:17 Msec=5250  True Az=112.995  Ze=-170.46  Az status=0008  Ze status=0009
09:29:17 Check angles
09:29:17 SkyScan query
09:29:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:29:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:29:17 Message to Master queued w/err=0: serial=351609 error=0
09:29:22 Received message from Master: op=Filter serial=351610
09:29:22 Color wheel filter change from 0 to 0
09:29:22 FLIGetFilterPos err=0  currentPosition=0
09:29:22 FLIGetStepsRemaining err=0  RemainingSteps=0
09:29:22 Filter is already there-color wheel unchanged
09:29:23 Received message from Master: op=Shutter serial=351611
09:29:23 Shutter LASER open
09:29:23 Received message from Camera: op=State serial=351613
09:29:23 GetSingleValue result=40  Value=cccccccc
09:29:23 SkyScan query
09:29:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:29:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:23 Parameters OK
09:29:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:23 Set A/D data flow result=40
09:29:23 Set A/D channel type result=40
09:29:23 Set A/D encoding result=40
09:29:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:23 Set channel filter=0.000000e+000  result=40
09:29:23 Config A/D  Result=40
09:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:23 Get A/D filter: -9.255963e+061  result=40
09:29:23 Get A/D value=-858993460  result=40
09:29:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:23 Parameters OK
09:29:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:23 Set A/D data flow result=40
09:29:23 Set A/D channel type result=40
09:29:23 Set A/D encoding result=40
09:29:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:23 Set channel filter=0.000000e+000  result=40
09:29:23 Config A/D  Result=40
09:29:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:23 Get A/D filter: -9.255963e+061  result=40
09:29:23 Get A/D value=-858993460  result=40
09:29:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:29:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:29:24 Aux=
09:29:24 Message to Camera, serial 351613 queued
09:29:31 Received message from Master: op=Shutter serial=351622
09:29:31 Shutter LASER close
09:29:32 Received message from Master: op=PointingHead serial=351626
09:29:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:29:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:29:33 Point started: ret=0
09:29:33 point_skyscan result=0
09:29:33 Check angles
09:29:33 SkyScan query
09:29:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.8<-21520  Statuses=0008 0009
09:29:34 Msec=0  True Az=112.995  Ze=-142.8  Az status=0008  Ze status=0009
09:29:34 Check angles
09:29:34 SkyScan query
09:29:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.8<-20120  Statuses=0008 0009
09:29:35 Msec=750  True Az=112.995  Ze=-121.8  Az status=0008  Ze status=0009
09:29:35 Check angles
09:29:35 SkyScan query
09:29:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.995<-18733  Statuses=0008 0009
09:29:35 Msec=1500  True Az=112.995  Ze=-100.995  Az status=0008  Ze status=0009
09:29:36 Check angles
09:29:36 SkyScan query
09:29:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.025<-17335  Statuses=0008 0009
09:29:36 Msec=2250  True Az=112.995  Ze=-80.025  Az status=0008  Ze status=0009
09:29:36 Check angles
09:29:36 SkyScan query
09:29:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.085<-15939  Statuses=0008 0009
09:29:37 Msec=3000  True Az=112.995  Ze=-59.085  Az status=0008  Ze status=0009
09:29:37 Check angles
09:29:37 SkyScan query
09:29:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.13<-14542  Statuses=0008 0009
09:29:38 Msec=3750  True Az=112.995  Ze=-38.13  Az status=0008  Ze status=0009
09:29:38 Check angles
09:29:38 SkyScan query
09:29:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
09:29:38 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
09:29:39 Check angles
09:29:39 SkyScan query
09:29:39 SkyScan query done: ret=0  az=112.995<-7533  ze=3.78<-11748  Statuses=0008 0009
09:29:39 Msec=5250  True Az=112.995  Ze=3.78  Az status=0008  Ze status=0009
09:29:39 Check angles
09:29:39 SkyScan query
09:29:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:29:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:29:40 Message to Master queued w/err=0: serial=351626 error=0
09:29:45 Received message from Master: op=Filter serial=351627
09:29:45 Color wheel filter change from 0 to 0
09:29:45 FLIGetFilterPos err=0  currentPosition=0
09:29:45 FLIGetStepsRemaining err=0  RemainingSteps=0
09:29:45 Filter is already there-color wheel unchanged
09:29:45 Received message from Master: op=Shutter serial=351628
09:29:45 Shutter LASER close
09:29:45 Received message from Camera: op=State serial=351630
09:29:45 GetSingleValue result=40  Value=cccccccc
09:29:45 SkyScan query
09:29:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:29:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:46 Parameters OK
09:29:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:46 Set A/D data flow result=40
09:29:46 Set A/D channel type result=40
09:29:46 Set A/D encoding result=40
09:29:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:46 Set channel filter=0.000000e+000  result=40
09:29:46 Config A/D  Result=40
09:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:46 Get A/D filter: -9.255963e+061  result=40
09:29:46 Get A/D value=-858993460  result=40
09:29:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:46 Parameters OK
09:29:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:46 Set A/D data flow result=40
09:29:46 Set A/D channel type result=40
09:29:46 Set A/D encoding result=40
09:29:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:46 Set channel filter=0.000000e+000  result=40
09:29:46 Config A/D  Result=40
09:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:46 Get A/D filter: -9.255963e+061  result=40
09:29:46 Get A/D value=-858993460  result=40
09:29:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:29:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:29:46 Aux=
09:29:46 Message to Camera, serial 351630 queued
09:30:22 Received message from Master: op=PointingHead serial=351642
09:30:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:30:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:30:23 Point started: ret=0
09:30:23 point_skyscan result=0
09:30:24 Check angles
09:30:24 SkyScan query
09:30:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:30:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:30:24 Message to Master queued w/err=0: serial=351642 error=0
09:30:29 Received message from Master: op=Filter serial=351643
09:30:29 Color wheel filter change from 0 to 0
09:30:29 FLIGetFilterPos err=0  currentPosition=0
09:30:29 FLIGetStepsRemaining err=0  RemainingSteps=0
09:30:29 Filter is already there-color wheel unchanged
09:30:30 Received message from Master: op=Shutter serial=351644
09:30:30 Shutter LASER close
09:30:30 Received message from Camera: op=State serial=351646
09:30:30 GetSingleValue result=40  Value=cccccccc
09:30:30 SkyScan query
09:30:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:30:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:30:31 Parameters OK
09:30:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:30:31 Set A/D data flow result=40
09:30:31 Set A/D channel type result=40
09:30:31 Set A/D encoding result=40
09:30:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:30:31 Set channel filter=0.000000e+000  result=40
09:30:31 Config A/D  Result=40
09:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:30:31 Get A/D filter: -9.255963e+061  result=40
09:30:31 Get A/D value=-858993460  result=40
09:30:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:30:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:30:31 Parameters OK
09:30:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:30:31 Set A/D data flow result=40
09:30:31 Set A/D channel type result=40
09:30:31 Set A/D encoding result=40
09:30:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:30:31 Set channel filter=0.000000e+000  result=40
09:30:31 Config A/D  Result=40
09:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:30:31 Get A/D filter: -9.255963e+061  result=40
09:30:31 Get A/D value=-858993460  result=40
09:30:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:30:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:30:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:30:31 Aux=
09:30:31 Message to Camera, serial 351646 queued
09:31:08 Received message from Master: op=PointingHead serial=351658
09:31:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:31:08 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:31:08 Point started: ret=0
09:31:08 point_skyscan result=0
09:31:09 Check angles
09:31:09 SkyScan query
09:31:09 SkyScan query done: ret=0  az=136.08<-9072  ze=-6.51<-12434  Statuses=0009 0008
09:31:09 Msec=0  True Az=136.08  Ze=-6.51  Az status=0009  Ze status=0008
09:31:09 Check angles
09:31:09 SkyScan query
09:31:10 SkyScan query done: ret=0  az=153.57<-10238  ze=-6.495<-12433  Statuses=0009 0008
09:31:10 Msec=750  True Az=153.57  Ze=-6.495  Az status=0009  Ze status=0008
09:31:10 Check angles
09:31:10 SkyScan query
09:31:11 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.495<-12433  Statuses=0009 0008
09:31:11 Msec=1500  True Az=171.33  Ze=-6.495  Az status=0009  Ze status=0008
09:31:11 Check angles
09:31:11 SkyScan query
09:31:12 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:31:12 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:31:12 Message to Master queued w/err=0: serial=351658 error=0
09:31:17 Received message from Master: op=Filter serial=351659
09:31:17 Color wheel filter change from 0 to 0
09:31:17 FLIGetFilterPos err=0  currentPosition=0
09:31:17 FLIGetStepsRemaining err=0  RemainingSteps=0
09:31:17 Filter is already there-color wheel unchanged
09:31:17 Received message from Master: op=Shutter serial=351660
09:31:17 Shutter LASER close
09:31:17 Received message from Camera: op=State serial=351662
09:31:17 GetSingleValue result=40  Value=cccccccc
09:31:17 SkyScan query
09:31:18 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:31:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:31:18 Parameters OK
09:31:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:31:18 Set A/D data flow result=40
09:31:18 Set A/D channel type result=40
09:31:18 Set A/D encoding result=40
09:31:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:31:18 Set channel filter=0.000000e+000  result=40
09:31:18 Config A/D  Result=40
09:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:31:18 Get A/D filter: -9.255963e+061  result=40
09:31:18 Get A/D value=-858993460  result=40
09:31:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:31:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:31:18 Parameters OK
09:31:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:31:18 Set A/D data flow result=40
09:31:18 Set A/D channel type result=40
09:31:18 Set A/D encoding result=40
09:31:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:31:18 Set channel filter=0.000000e+000  result=40
09:31:18 Config A/D  Result=40
09:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:31:18 Get A/D filter: -9.255963e+061  result=40
09:31:18 Get A/D value=-858993460  result=40
09:31:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:31:18 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:31:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:31:18 Aux=
09:31:18 Message to Camera, serial 351662 queued
09:31:55 Received message from Master: op=PointingHead serial=351674
09:31:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:31:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:31:55 Point started: ret=0
09:31:55 point_skyscan result=0
09:31:56 Check angles
09:31:56 SkyScan query
09:31:56 SkyScan query done: ret=0  az=151.725<-10115  ze=6.51<-11566  Statuses=0009 0008
09:31:56 Msec=0  True Az=151.725  Ze=6.51  Az status=0009  Ze status=0008
09:31:57 Check angles
09:31:57 SkyScan query
09:31:57 SkyScan query done: ret=0  az=134.04<-8936  ze=6.495<-11567  Statuses=0009 0008
09:31:57 Msec=750  True Az=134.04  Ze=6.495  Az status=0009  Ze status=0008
09:31:57 Check angles
09:31:57 SkyScan query
09:31:58 SkyScan query done: ret=0  az=116.625<-7775  ze=6.495<-11567  Statuses=0009 0008
09:31:58 Msec=1500  True Az=116.625  Ze=6.495  Az status=0009  Ze status=0008
09:31:58 Check angles
09:31:58 SkyScan query
09:31:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:31:59 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:31:59 Message to Master queued w/err=0: serial=351674 error=0
09:32:04 Received message from Master: op=Filter serial=351675
09:32:04 Color wheel filter change from 0 to 0
09:32:04 FLIGetFilterPos err=0  currentPosition=0
09:32:04 FLIGetStepsRemaining err=0  RemainingSteps=0
09:32:04 Filter is already there-color wheel unchanged
09:32:04 Received message from Master: op=Shutter serial=351676
09:32:04 Shutter LASER close
09:32:04 Received message from Camera: op=State serial=351678
09:32:04 GetSingleValue result=40  Value=cccccccc
09:32:04 SkyScan query
09:32:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:32:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:05 Parameters OK
09:32:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:05 Set A/D data flow result=40
09:32:05 Set A/D channel type result=40
09:32:05 Set A/D encoding result=40
09:32:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:05 Set channel filter=0.000000e+000  result=40
09:32:05 Config A/D  Result=40
09:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:05 Get A/D filter: -9.255963e+061  result=40
09:32:05 Get A/D value=-858993460  result=40
09:32:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:05 Parameters OK
09:32:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:05 Set A/D data flow result=40
09:32:05 Set A/D channel type result=40
09:32:05 Set A/D encoding result=40
09:32:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:05 Set channel filter=0.000000e+000  result=40
09:32:05 Config A/D  Result=40
09:32:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:05 Get A/D filter: -9.255963e+061  result=40
09:32:05 Get A/D value=-858993460  result=40
09:32:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:32:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:32:05 Aux=
09:32:05 Message to Camera, serial 351678 queued
09:32:41 Received message from Master: op=PointingHead serial=351690
09:32:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:32:41 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:32:42 Point started: ret=0
09:32:42 point_skyscan result=0
09:32:42 Check angles
09:32:42 SkyScan query
09:32:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
09:32:43 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
09:32:43 Check angles
09:32:43 SkyScan query
09:32:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
09:32:44 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
09:32:44 Check angles
09:32:44 SkyScan query
09:32:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
09:32:44 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
09:32:45 Check angles
09:32:45 SkyScan query
09:32:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
09:32:45 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
09:32:45 Check angles
09:32:45 SkyScan query
09:32:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.175<-19145  Statuses=0008 0009
09:32:46 Msec=3000  True Az=112.995  Ze=-107.175  Az status=0008  Ze status=0009
09:32:46 Check angles
09:32:46 SkyScan query
09:32:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.16<-20544  Statuses=0008 0009
09:32:47 Msec=3750  True Az=112.995  Ze=-128.16  Az status=0008  Ze status=0009
09:32:47 Check angles
09:32:47 SkyScan query
09:32:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.25<-21950  Statuses=0008 0009
09:32:47 Msec=4500  True Az=112.995  Ze=-149.25  Az status=0008  Ze status=0009
09:32:48 Check angles
09:32:48 SkyScan query
09:32:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.235<-23349  Statuses=0008 0009
09:32:48 Msec=5250  True Az=112.995  Ze=-170.235  Az status=0008  Ze status=0009
09:32:48 Check angles
09:32:48 SkyScan query
09:32:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:32:49 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:32:49 Message to Master queued w/err=0: serial=351690 error=0
09:32:54 Received message from Master: op=Filter serial=351691
09:32:54 Color wheel filter change from 0 to 0
09:32:54 FLIGetFilterPos err=0  currentPosition=0
09:32:54 FLIGetStepsRemaining err=0  RemainingSteps=0
09:32:54 Filter is already there-color wheel unchanged
09:32:54 Received message from Master: op=Shutter serial=351692
09:32:54 Shutter LASER open
09:32:54 Received message from Camera: op=State serial=351694
09:32:54 GetSingleValue result=40  Value=cccccccc
09:32:54 SkyScan query
09:32:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:32:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:55 Parameters OK
09:32:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:55 Set A/D data flow result=40
09:32:55 Set A/D channel type result=40
09:32:55 Set A/D encoding result=40
09:32:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:55 Set channel filter=0.000000e+000  result=40
09:32:55 Config A/D  Result=40
09:32:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:55 Get A/D filter: -9.255963e+061  result=40
09:32:55 Get A/D value=-858993460  result=40
09:32:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:55 Parameters OK
09:32:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:55 Set A/D data flow result=40
09:32:55 Set A/D channel type result=40
09:32:55 Set A/D encoding result=40
09:32:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:55 Set channel filter=0.000000e+000  result=40
09:32:55 Config A/D  Result=40
09:32:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:55 Get A/D filter: -9.255963e+061  result=40
09:32:55 Get A/D value=-858993460  result=40
09:32:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:32:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:32:55 Aux=
09:32:55 Message to Camera, serial 351694 queued
09:33:03 Received message from Master: op=Shutter serial=351703
09:33:03 Shutter LASER close
09:33:04 Received message from Master: op=PointingHead serial=351707
09:33:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:33:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:33:04 Point started: ret=0
09:33:04 point_skyscan result=0
09:33:05 Check angles
09:33:05 SkyScan query
09:33:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
09:33:05 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
09:33:06 Check angles
09:33:06 SkyScan query
09:33:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.265<-20151  Statuses=0008 0009
09:33:06 Msec=750  True Az=112.995  Ze=-122.265  Az status=0008  Ze status=0009
09:33:06 Check angles
09:33:06 SkyScan query
09:33:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
09:33:07 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
09:33:07 Check angles
09:33:07 SkyScan query
09:33:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.34<-17356  Statuses=0008 0009
09:33:08 Msec=2250  True Az=112.995  Ze=-80.34  Az status=0008  Ze status=0009
09:33:08 Check angles
09:33:08 SkyScan query
09:33:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.415<-15961  Statuses=0008 0009
09:33:08 Msec=3000  True Az=112.995  Ze=-59.415  Az status=0008  Ze status=0009
09:33:09 Check angles
09:33:09 SkyScan query
09:33:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
09:33:09 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
09:33:09 Check angles
09:33:09 SkyScan query
09:33:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.01<-13134  Statuses=0008 0009
09:33:10 Msec=4500  True Az=112.995  Ze=-17.01  Az status=0008  Ze status=0009
09:33:10 Check angles
09:33:10 SkyScan query
09:33:11 SkyScan query done: ret=0  az=112.995<-7533  ze=3.96<-11736  Statuses=0008 0009
09:33:11 Msec=5250  True Az=112.995  Ze=3.96  Az status=0008  Ze status=0009
09:33:11 Check angles
09:33:11 SkyScan query
09:33:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:33:12 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:33:12 Message to Master queued w/err=0: serial=351707 error=0
09:33:17 Received message from Master: op=Filter serial=351708
09:33:17 Color wheel filter change from 0 to 0
09:33:17 FLIGetFilterPos err=0  currentPosition=0
09:33:17 FLIGetStepsRemaining err=0  RemainingSteps=0
09:33:17 Filter is already there-color wheel unchanged
09:33:17 Received message from Master: op=Shutter serial=351709
09:33:17 Shutter LASER close
09:33:17 Received message from Camera: op=State serial=351711
09:33:17 GetSingleValue result=40  Value=cccccccc
09:33:17 SkyScan query
09:33:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:33:18 Parameters OK
09:33:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:33:18 Set A/D data flow result=40
09:33:18 Set A/D channel type result=40
09:33:18 Set A/D encoding result=40
09:33:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:33:18 Set channel filter=0.000000e+000  result=40
09:33:18 Config A/D  Result=40
09:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:33:18 Get A/D filter: -9.255963e+061  result=40
09:33:18 Get A/D value=-858993460  result=40
09:33:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:33:18 Parameters OK
09:33:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:33:18 Set A/D data flow result=40
09:33:18 Set A/D channel type result=40
09:33:18 Set A/D encoding result=40
09:33:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:33:18 Set channel filter=0.000000e+000  result=40
09:33:18 Config A/D  Result=40
09:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:33:18 Get A/D filter: -9.255963e+061  result=40
09:33:18 Get A/D value=-858993460  result=40
09:33:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:33:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:33:18 Aux=
09:33:18 Message to Camera, serial 351711 queued
09:33:35 Received message from Master: op=Identify serial=351712
09:33:54 Received message from Master: op=PointingHead serial=351726
09:33:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:33:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:33:54 Point started: ret=0
09:33:54 point_skyscan result=0
09:33:55 Check angles
09:33:55 SkyScan query
09:33:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:33:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:33:56 Message to Master queued w/err=0: serial=351726 error=0
09:34:01 Received message from Master: op=Filter serial=351727
09:34:01 Color wheel filter change from 0 to 0
09:34:01 FLIGetFilterPos err=0  currentPosition=0
09:34:01 FLIGetStepsRemaining err=0  RemainingSteps=0
09:34:01 Filter is already there-color wheel unchanged
09:34:01 Received message from Master: op=Shutter serial=351728
09:34:01 Shutter LASER close
09:34:01 Received message from Camera: op=State serial=351730
09:34:01 GetSingleValue result=40  Value=cccccccc
09:34:01 SkyScan query
09:34:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:34:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:34:01 Parameters OK
09:34:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:34:01 Set A/D data flow result=40
09:34:01 Set A/D channel type result=40
09:34:01 Set A/D encoding result=40
09:34:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:34:01 Set channel filter=0.000000e+000  result=40
09:34:01 Config A/D  Result=40
09:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:34:01 Get A/D filter: -9.255963e+061  result=40
09:34:01 Get A/D value=-858993460  result=40
09:34:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:34:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:34:01 Parameters OK
09:34:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:34:01 Set A/D data flow result=40