[UTC 2019-3-13 14:49:15] 14:49:15 Received message from Master: op=Log open serial=264126 14:49:15 Log file open: Observatory C:\PKZPrograms\Logs\20190312 \ PKZ20190313144915_Observatory.txt 14:49:15 Previous log file: 14:49:20 Received message from Master: op=Log directory change serial=264128 14:49:20 Log file directory changed from C:\PKZPrograms\Logs\20190312 to C:\PKZPrograms\Logs\20190313 14:49:20 Log file name is PKZ20190313144920_Observatory.txt 14:59:20 No messages received for 10 min. 4031 sent since last one of these. 14:59:20 MsgArea H: nextMessageSerial=264136 startMsgs=68 nextFree=51408 maxMsg=65468 14:59:20 MsgArea Q: Master=-1:-1 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 14:59:20 MsgArea S: 15:03:35 Received message from Master: op=Identify serial=264136 [UTC 2019-3-13 15:03:48] 15:13:35 No messages received for 10 min. 1 sent since last one of these. 15:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 15:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 15:13:35 MsgArea S: 15:23:35 No messages received for 10 min. 0 sent since last one of these. 15:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 15:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 15:23:35 MsgArea S: [UTC 2019-3-13 15:23:48] 15:33:35 No messages received for 10 min. 0 sent since last one of these. 15:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 15:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 15:33:35 MsgArea S: 15:43:35 No messages received for 10 min. 0 sent since last one of these. 15:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 15:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 15:43:35 MsgArea S: [UTC 2019-3-13 15:43:48] 15:53:35 No messages received for 10 min. 0 sent since last one of these. 15:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 15:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 15:53:35 MsgArea S: 16:03:35 No messages received for 10 min. 0 sent since last one of these. 16:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 16:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 16:03:35 MsgArea S: [UTC 2019-3-13 16:03:48] 16:13:35 No messages received for 10 min. 0 sent since last one of these. 16:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 16:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 16:13:35 MsgArea S: 16:23:35 No messages received for 10 min. 0 sent since last one of these. 16:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 16:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 16:23:35 MsgArea S: [UTC 2019-3-13 16:23:48] 16:33:35 No messages received for 10 min. 0 sent since last one of these. 16:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 16:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 16:33:35 MsgArea S: 16:43:35 No messages received for 10 min. 0 sent since last one of these. 16:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 16:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 16:43:35 MsgArea S: [UTC 2019-3-13 16:43:48] 16:53:35 No messages received for 10 min. 0 sent since last one of these. 16:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 16:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 16:53:35 MsgArea S: 17:03:35 No messages received for 10 min. 0 sent since last one of these. 17:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 17:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:03:35 MsgArea S: [UTC 2019-3-13 17:03:48] 17:13:35 No messages received for 10 min. 0 sent since last one of these. 17:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 17:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:13:35 MsgArea S: 17:23:35 No messages received for 10 min. 0 sent since last one of these. 17:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 17:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:23:35 MsgArea S: [UTC 2019-3-13 17:23:48] 17:33:35 No messages received for 10 min. 0 sent since last one of these. 17:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 17:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:33:35 MsgArea S: 17:43:35 No messages received for 10 min. 0 sent since last one of these. 17:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 17:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:43:35 MsgArea S: [UTC 2019-3-13 17:43:48] 17:53:35 No messages received for 10 min. 0 sent since last one of these. 17:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 17:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 17:53:35 MsgArea S: 18:03:35 No messages received for 10 min. 0 sent since last one of these. 18:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 18:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:03:35 MsgArea S: [UTC 2019-3-13 18:03:48] 18:13:35 No messages received for 10 min. 0 sent since last one of these. 18:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 18:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:13:35 MsgArea S: 18:23:35 No messages received for 10 min. 0 sent since last one of these. 18:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 18:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:23:35 MsgArea S: [UTC 2019-3-13 18:23:48] 18:33:35 No messages received for 10 min. 0 sent since last one of these. 18:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 18:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:33:35 MsgArea S: 18:43:35 No messages received for 10 min. 0 sent since last one of these. 18:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 18:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:43:35 MsgArea S: [UTC 2019-3-13 18:43:48] 18:53:35 No messages received for 10 min. 0 sent since last one of these. 18:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 18:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 18:53:35 MsgArea S: 19:03:35 No messages received for 10 min. 0 sent since last one of these. 19:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 19:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:03:35 MsgArea S: [UTC 2019-3-13 19:03:48] 19:13:35 No messages received for 10 min. 0 sent since last one of these. 19:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 19:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:13:35 MsgArea S: 19:23:35 No messages received for 10 min. 0 sent since last one of these. 19:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 19:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:23:35 MsgArea S: [UTC 2019-3-13 19:23:48] 19:33:35 No messages received for 10 min. 0 sent since last one of these. 19:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 19:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:33:35 MsgArea S: 19:43:35 No messages received for 10 min. 0 sent since last one of these. 19:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 19:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:43:35 MsgArea S: [UTC 2019-3-13 19:43:48] 19:53:35 No messages received for 10 min. 0 sent since last one of these. 19:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 19:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 19:53:35 MsgArea S: 20:03:35 No messages received for 10 min. 0 sent since last one of these. 20:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 20:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:03:35 MsgArea S: [UTC 2019-3-13 20:03:48] 20:13:35 No messages received for 10 min. 0 sent since last one of these. 20:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 20:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:13:35 MsgArea S: 20:23:35 No messages received for 10 min. 0 sent since last one of these. 20:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 20:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:23:35 MsgArea S: [UTC 2019-3-13 20:23:48] 20:33:35 No messages received for 10 min. 0 sent since last one of these. 20:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 20:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:33:35 MsgArea S: 20:43:35 No messages received for 10 min. 0 sent since last one of these. 20:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 20:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:43:35 MsgArea S: [UTC 2019-3-13 20:43:48] 20:53:35 No messages received for 10 min. 0 sent since last one of these. 20:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 20:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 20:53:35 MsgArea S: 21:03:35 No messages received for 10 min. 0 sent since last one of these. 21:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 21:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:03:35 MsgArea S: [UTC 2019-3-13 21:03:48] 21:13:35 No messages received for 10 min. 0 sent since last one of these. 21:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 21:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:13:35 MsgArea S: 21:23:35 No messages received for 10 min. 0 sent since last one of these. 21:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 21:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:23:35 MsgArea S: [UTC 2019-3-13 21:23:48] 21:33:35 No messages received for 10 min. 0 sent since last one of these. 21:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 21:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:33:35 MsgArea S: 21:43:35 No messages received for 10 min. 0 sent since last one of these. 21:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 21:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:43:35 MsgArea S: [UTC 2019-3-13 21:43:48] 21:53:35 No messages received for 10 min. 0 sent since last one of these. 21:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 21:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 21:53:35 MsgArea S: 22:03:35 No messages received for 10 min. 0 sent since last one of these. 22:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 22:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:03:35 MsgArea S: [UTC 2019-3-13 22:03:48] 22:13:35 No messages received for 10 min. 0 sent since last one of these. 22:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 22:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:13:35 MsgArea S: 22:23:35 No messages received for 10 min. 0 sent since last one of these. 22:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 22:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:23:35 MsgArea S: [UTC 2019-3-13 22:23:48] 22:33:35 No messages received for 10 min. 0 sent since last one of these. 22:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 22:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:33:35 MsgArea S: 22:43:35 No messages received for 10 min. 0 sent since last one of these. 22:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 22:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:43:35 MsgArea S: [UTC 2019-3-13 22:43:48] 22:53:35 No messages received for 10 min. 0 sent since last one of these. 22:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 22:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 22:53:35 MsgArea S: 23:03:35 No messages received for 10 min. 0 sent since last one of these. 23:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 23:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:03:35 MsgArea S: [UTC 2019-3-13 23:03:48] 23:13:35 No messages received for 10 min. 0 sent since last one of these. 23:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 23:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:13:35 MsgArea S: 23:23:35 No messages received for 10 min. 0 sent since last one of these. 23:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 23:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:23:35 MsgArea S: [UTC 2019-3-13 23:23:48] 23:33:35 No messages received for 10 min. 0 sent since last one of these. 23:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 23:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:33:35 MsgArea S: 23:43:35 No messages received for 10 min. 0 sent since last one of these. 23:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 23:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:43:35 MsgArea S: [UTC 2019-3-13 23:43:48] 23:53:35 No messages received for 10 min. 0 sent since last one of these. 23:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 23:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 23:53:35 MsgArea S: 00:03:35 No messages received for 10 min. 0 sent since last one of these. 00:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 00:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 00:03:35 MsgArea S: [UTC 2019-3-14 00:03:48] 00:13:35 No messages received for 10 min. 0 sent since last one of these. 00:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 00:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 00:13:35 MsgArea S: 00:23:35 No messages received for 10 min. 0 sent since last one of these. 00:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 00:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 00:23:35 MsgArea S: [UTC 2019-3-14 00:23:48] 00:33:35 No messages received for 10 min. 0 sent since last one of these. 00:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 00:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 00:33:35 MsgArea S: 00:43:35 No messages received for 10 min. 0 sent since last one of these. 00:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 00:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 00:43:35 MsgArea S: [UTC 2019-3-14 00:43:48] 00:53:35 No messages received for 10 min. 0 sent since last one of these. 00:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 00:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 00:53:35 MsgArea S: 01:03:35 No messages received for 10 min. 0 sent since last one of these. 01:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 01:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 01:03:35 MsgArea S: [UTC 2019-3-14 01:03:48] 01:13:35 No messages received for 10 min. 0 sent since last one of these. 01:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 01:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 01:13:35 MsgArea S: 01:23:35 No messages received for 10 min. 0 sent since last one of these. 01:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 01:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 01:23:35 MsgArea S: [UTC 2019-3-14 01:23:48] 01:33:35 No messages received for 10 min. 0 sent since last one of these. 01:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 01:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 01:33:35 MsgArea S: 01:43:35 No messages received for 10 min. 0 sent since last one of these. 01:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 01:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 01:43:35 MsgArea S: [UTC 2019-3-14 01:43:48] 01:53:35 No messages received for 10 min. 0 sent since last one of these. 01:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 01:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 01:53:35 MsgArea S: 02:03:35 No messages received for 10 min. 0 sent since last one of these. 02:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 02:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 02:03:35 MsgArea S: [UTC 2019-3-14 02:03:48] 02:13:35 No messages received for 10 min. 0 sent since last one of these. 02:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 02:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 02:13:35 MsgArea S: 02:23:35 No messages received for 10 min. 0 sent since last one of these. 02:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 02:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 02:23:35 MsgArea S: [UTC 2019-3-14 02:23:48] 02:33:35 No messages received for 10 min. 0 sent since last one of these. 02:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 02:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 02:33:35 MsgArea S: 02:43:35 No messages received for 10 min. 0 sent since last one of these. 02:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 02:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 02:43:35 MsgArea S: [UTC 2019-3-14 02:43:48] 02:53:35 No messages received for 10 min. 0 sent since last one of these. 02:53:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 02:53:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 02:53:35 MsgArea S: 03:03:35 No messages received for 10 min. 0 sent since last one of these. 03:03:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 03:03:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 03:03:35 MsgArea S: [UTC 2019-3-14 03:03:48] 03:13:35 No messages received for 10 min. 0 sent since last one of these. 03:13:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 03:13:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 03:13:35 MsgArea S: 03:23:35 No messages received for 10 min. 0 sent since last one of these. 03:23:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 03:23:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 03:23:35 MsgArea S: [UTC 2019-3-14 03:23:48] 03:33:35 No messages received for 10 min. 0 sent since last one of these. 03:33:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 03:33:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 03:33:35 MsgArea S: 03:43:35 No messages received for 10 min. 0 sent since last one of these. 03:43:35 MsgArea H: nextMessageSerial=264139 startMsgs=68 nextFree=52632 maxMsg=65468 03:43:35 MsgArea Q: Master=52020:52428 Camera=-1:-1 Observatory=-1:-1 Communicate=408:408 Analyze=-1:-1 03:43:35 MsgArea S: [UTC 2019-3-14 03:43:48] 03:53:07 Received message from Master: op=PointingHead serial=264140 03:53:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:53:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:53:07 Point started: ret=0 03:53:07 point_skyscan result=0 03:53:08 Check angles 03:53:08 SkyScan query 03:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:09 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:53:09 Message to Master queued w/err=0: serial=264140 error=0 03:53:14 Received message from Master: op=Filter serial=264141 03:53:14 Color wheel filter change from 2 to 2 03:53:14 FLIGetFilterPos err=0 currentPosition=2 03:53:14 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:14 Filter is already there-color wheel unchanged 03:53:14 Received message from Master: op=Shutter serial=264142 03:53:14 Shutter LASER close 03:53:15 Received message from Camera: op=State serial=264144 03:53:15 GetSingleValue result=40 Value=cccccccc 03:53:15 SkyScan query 03:53:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:16 Parameters OK 03:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:16 Set A/D data flow result=40 03:53:16 Set A/D channel type result=40 03:53:16 Set A/D encoding result=40 03:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:16 Set channel filter=0.000000e+000 result=40 03:53:16 Config A/D Result=40 03:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:16 Get A/D filter: -9.255963e+061 result=40 03:53:16 Get A/D value=-858993460 result=40 03:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:16 Parameters OK 03:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:16 Set A/D data flow result=40 03:53:16 Set A/D channel type result=40 03:53:16 Set A/D encoding result=40 03:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:16 Set channel filter=0.000000e+000 result=40 03:53:16 Config A/D Result=40 03:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:16 Get A/D filter: -9.255963e+061 result=40 03:53:16 Get A/D value=-858993460 result=40 03:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:16 Aux= 03:53:16 Message to Camera, serial 264144 queued 03:53:22 Received message from Master: op=PointingHead serial=264155 03:53:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:53:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:53:22 Point started: ret=0 03:53:22 point_skyscan result=0 03:53:23 Check angles 03:53:23 SkyScan query 03:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:23 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:53:23 Message to Master queued w/err=0: serial=264155 error=0 03:53:28 Received message from Master: op=Filter serial=264156 03:53:28 Color wheel filter change from 2 to 2 03:53:28 FLIGetFilterPos err=0 currentPosition=2 03:53:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:28 Filter is already there-color wheel unchanged 03:53:28 Received message from Master: op=Shutter serial=264157 03:53:28 Shutter LASER close 03:53:29 Received message from Camera: op=State serial=264159 03:53:29 GetSingleValue result=40 Value=cccccccc 03:53:29 SkyScan query 03:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:29 Parameters OK 03:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:29 Set A/D data flow result=40 03:53:29 Set A/D channel type result=40 03:53:29 Set A/D encoding result=40 03:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:29 Set channel filter=0.000000e+000 result=40 03:53:29 Config A/D Result=40 03:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:29 Get A/D filter: -9.255963e+061 result=40 03:53:29 Get A/D value=-858993460 result=40 03:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:29 Parameters OK 03:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:29 Set A/D data flow result=40 03:53:29 Set A/D channel type result=40 03:53:29 Set A/D encoding result=40 03:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:29 Set channel filter=0.000000e+000 result=40 03:53:29 Config A/D Result=40 03:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:29 Get A/D filter: -9.255963e+061 result=40 03:53:29 Get A/D value=-858993460 result=40 03:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:29 Aux= 03:53:29 Message to Camera, serial 264159 queued 03:54:05 Received message from Master: op=PointingHead serial=264171 03:54:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:05 Point started: ret=0 03:54:05 point_skyscan result=0 03:54:06 Check angles 03:54:06 SkyScan query 03:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:07 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:54:07 Message to Master queued w/err=0: serial=264171 error=0 03:54:12 Received message from Master: op=Filter serial=264172 03:54:12 Color wheel filter change from 2 to 2 03:54:12 FLIGetFilterPos err=0 currentPosition=2 03:54:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:12 Filter is already there-color wheel unchanged 03:54:12 Received message from Master: op=Shutter serial=264173 03:54:12 Shutter LASER open 03:54:12 Received message from Camera: op=State serial=264175 03:54:12 GetSingleValue result=40 Value=cccccccc 03:54:12 SkyScan query 03:54:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:13 Parameters OK 03:54:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:13 Set A/D data flow result=40 03:54:13 Set A/D channel type result=40 03:54:13 Set A/D encoding result=40 03:54:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:13 Set channel filter=0.000000e+000 result=40 03:54:13 Config A/D Result=40 03:54:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:13 Get A/D filter: -9.255963e+061 result=40 03:54:13 Get A/D value=-858993460 result=40 03:54:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:13 Parameters OK 03:54:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:13 Set A/D data flow result=40 03:54:13 Set A/D channel type result=40 03:54:13 Set A/D encoding result=40 03:54:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:13 Set channel filter=0.000000e+000 result=40 03:54:13 Config A/D Result=40 03:54:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:13 Get A/D filter: -9.255963e+061 result=40 03:54:13 Get A/D value=-858993460 result=40 03:54:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:13 Aux= 03:54:13 Message to Camera, serial 264175 queued 03:54:21 Received message from Master: op=Shutter serial=264185 03:54:21 Shutter LASER close 03:54:21 Received message from Master: op=PointingHead serial=264189 03:54:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:54:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:54:22 Point started: ret=0 03:54:22 point_skyscan result=0 03:54:23 Check angles 03:54:23 SkyScan query 03:54:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:23 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:54:23 Message to Master queued w/err=0: serial=264189 error=0 03:54:28 Received message from Master: op=Filter serial=264190 03:54:28 Color wheel filter change from 2 to 2 03:54:28 FLIGetFilterPos err=0 currentPosition=2 03:54:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:28 Filter is already there-color wheel unchanged 03:54:28 Received message from Master: op=Shutter serial=264191 03:54:28 Shutter LASER close 03:54:29 Received message from Camera: op=State serial=264193 03:54:29 GetSingleValue result=40 Value=cccccccc 03:54:29 SkyScan query 03:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:54:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:29 Parameters OK 03:54:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:29 Set A/D data flow result=40 03:54:29 Set A/D channel type result=40 03:54:29 Set A/D encoding result=40 03:54:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:29 Set channel filter=0.000000e+000 result=40 03:54:29 Config A/D Result=40 03:54:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:29 Get A/D filter: -9.255963e+061 result=40 03:54:29 Get A/D value=-858993460 result=40 03:54:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:29 Parameters OK 03:54:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:29 Set A/D data flow result=40 03:54:29 Set A/D channel type result=40 03:54:29 Set A/D encoding result=40 03:54:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:29 Set channel filter=0.000000e+000 result=40 03:54:29 Config A/D Result=40 03:54:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:29 Get A/D filter: -9.255963e+061 result=40 03:54:29 Get A/D value=-858993460 result=40 03:54:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:29 Aux= 03:54:29 Message to Camera, serial 264193 queued 03:54:37 Received message from Master: op=PointingHead serial=264205 03:54:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:54:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:54:37 Point started: ret=0 03:54:37 point_skyscan result=0 03:54:38 Check angles 03:54:38 SkyScan query 03:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 03:54:39 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 03:54:39 Check angles 03:54:39 SkyScan query 03:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 03:54:39 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 03:54:40 Check angles 03:54:40 SkyScan query 03:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 03:54:40 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 03:54:40 Check angles 03:54:40 SkyScan query 03:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 03:54:41 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 03:54:41 Check angles 03:54:41 SkyScan query 03:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 03:54:42 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 03:54:42 Check angles 03:54:42 SkyScan query 03:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 03:54:42 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 03:54:43 Check angles 03:54:43 SkyScan query 03:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 03:54:43 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 03:54:43 Check angles 03:54:43 SkyScan query 03:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 03:54:44 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 03:54:44 Check angles 03:54:44 SkyScan query 03:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:54:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:54:45 Message to Master queued w/err=0: serial=264205 error=0 03:54:50 Received message from Master: op=Filter serial=264206 03:54:50 Color wheel filter change from 2 to 0 03:54:50 FLIGetFilterPos err=0 currentPosition=2 03:54:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:56 FLISetFilterPos err=0 rqPosition=0 03:54:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:56 Check after 0.00 sec for filter wheel DIn/CWh=0 03:54:56 FLIGetFilterPos err=0 currentPosition=0 03:54:56 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:56 Received message from Master: op=Shutter serial=264207 03:54:56 Shutter LASER close 03:54:56 Received message from Camera: op=State serial=264209 03:54:56 GetSingleValue result=40 Value=cccccccc 03:54:56 SkyScan query 03:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:54:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:57 Parameters OK 03:54:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:57 Set A/D data flow result=40 03:54:57 Set A/D channel type result=40 03:54:57 Set A/D encoding result=40 03:54:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:57 Set channel filter=0.000000e+000 result=40 03:54:57 Config A/D Result=40 03:54:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:57 Get A/D filter: -9.255963e+061 result=40 03:54:57 Get A/D value=-858993460 result=40 03:54:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:57 Parameters OK 03:54:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:57 Set A/D data flow result=40 03:54:57 Set A/D channel type result=40 03:54:57 Set A/D encoding result=40 03:54:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:57 Set channel filter=0.000000e+000 result=40 03:54:57 Config A/D Result=40 03:54:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:57 Get A/D filter: -9.255963e+061 result=40 03:54:57 Get A/D value=-858993460 result=40 03:54:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:57 Aux= 03:54:57 Message to Camera, serial 264209 queued 03:55:34 Received message from Master: op=PointingHead serial=264222 03:55:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:55:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:55:34 Point started: ret=0 03:55:34 point_skyscan result=0 03:55:35 Check angles 03:55:35 SkyScan query 03:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:55:35 Message to Master queued w/err=0: serial=264222 error=0 03:55:40 Received message from Master: op=Filter serial=264223 03:55:40 Color wheel filter change from 0 to 0 03:55:40 FLIGetFilterPos err=0 currentPosition=0 03:55:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:40 Filter is already there-color wheel unchanged 03:55:40 Received message from Master: op=Shutter serial=264224 03:55:40 Shutter LASER close 03:55:40 Received message from Camera: op=State serial=264226 03:55:40 GetSingleValue result=40 Value=cccccccc 03:55:40 SkyScan query 03:55:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:55:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:41 Parameters OK 03:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:41 Set A/D data flow result=40 03:55:41 Set A/D channel type result=40 03:55:41 Set A/D encoding result=40 03:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:41 Set channel filter=0.000000e+000 result=40 03:55:41 Config A/D Result=40 03:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:41 Get A/D filter: -9.255963e+061 result=40 03:55:41 Get A/D value=-858993460 result=40 03:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:41 Parameters OK 03:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:41 Set A/D data flow result=40 03:55:41 Set A/D channel type result=40 03:55:41 Set A/D encoding result=40 03:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:41 Set channel filter=0.000000e+000 result=40 03:55:41 Config A/D Result=40 03:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:41 Get A/D filter: -9.255963e+061 result=40 03:55:41 Get A/D value=-858993460 result=40 03:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:41 Aux= 03:55:41 Message to Camera, serial 264226 queued 03:56:18 Received message from Master: op=PointingHead serial=264239 03:56:18 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 03:56:18 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 03:56:18 Point started: ret=0 03:56:18 point_skyscan result=0 03:56:19 Check angles 03:56:19 SkyScan query 03:56:20 SkyScan query done: ret=0 az=136.065<-9071 ze=-6.51<-12434 Statuses=0009 0008 03:56:20 Msec=0 True Az=136.065 Ze=-6.51 Az status=0009 Ze status=0008 03:56:20 Check angles 03:56:20 SkyScan query 03:56:20 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 03:56:20 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 03:56:20 Check angles 03:56:20 SkyScan query 03:56:21 SkyScan query done: ret=0 az=170.94<-11396 ze=-6.495<-12433 Statuses=0009 0008 03:56:21 Msec=1500 True Az=170.94 Ze=-6.495 Az status=0009 Ze status=0008 03:56:21 Check angles 03:56:21 SkyScan query 03:56:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 03:56:22 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 03:56:22 Message to Master queued w/err=0: serial=264239 error=0 03:56:27 Received message from Master: op=Filter serial=264240 03:56:27 Color wheel filter change from 0 to 0 03:56:27 FLIGetFilterPos err=0 currentPosition=0 03:56:27 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:27 Filter is already there-color wheel unchanged 03:56:27 Received message from Master: op=Shutter serial=264241 03:56:27 Shutter LASER close 03:56:27 Received message from Camera: op=State serial=264243 03:56:27 GetSingleValue result=40 Value=cccccccc 03:56:27 SkyScan query 03:56:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 03:56:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:28 Parameters OK 03:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:28 Set A/D data flow result=40 03:56:28 Set A/D channel type result=40 03:56:28 Set A/D encoding result=40 03:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:28 Set channel filter=0.000000e+000 result=40 03:56:28 Config A/D Result=40 03:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:28 Get A/D filter: -9.255963e+061 result=40 03:56:28 Get A/D value=-858993460 result=40 03:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:28 Parameters OK 03:56:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:28 Set A/D data flow result=40 03:56:28 Set A/D channel type result=40 03:56:28 Set A/D encoding result=40 03:56:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:28 Set channel filter=0.000000e+000 result=40 03:56:28 Config A/D Result=40 03:56:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:28 Get A/D filter: -9.255963e+061 result=40 03:56:28 Get A/D value=-858993460 result=40 03:56:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:28 Aux= 03:56:28 Message to Camera, serial 264243 queued 03:57:04 Received message from Master: op=PointingHead serial=264256 03:57:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:57:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:57:05 Point started: ret=0 03:57:05 point_skyscan result=0 03:57:06 Check angles 03:57:06 SkyScan query 03:57:06 SkyScan query done: ret=0 az=152.985<-10199 ze=6.51<-11566 Statuses=0009 0008 03:57:06 Msec=0 True Az=152.985 Ze=6.51 Az status=0009 Ze status=0008 03:57:06 Check angles 03:57:06 SkyScan query 03:57:07 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 03:57:07 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 03:57:07 Check angles 03:57:07 SkyScan query 03:57:08 SkyScan query done: ret=0 az=118.02<-7868 ze=6.495<-11567 Statuses=0009 0008 03:57:08 Msec=1500 True Az=118.02 Ze=6.495 Az status=0009 Ze status=0008 03:57:08 Check angles 03:57:08 SkyScan query 03:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:57:08 Message to Master queued w/err=0: serial=264256 error=0 03:57:13 Received message from Master: op=Filter serial=264257 03:57:13 Color wheel filter change from 0 to 0 03:57:13 FLIGetFilterPos err=0 currentPosition=0 03:57:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:13 Filter is already there-color wheel unchanged 03:57:14 Received message from Master: op=Shutter serial=264258 03:57:14 Shutter LASER close 03:57:14 Received message from Camera: op=State serial=264260 03:57:14 GetSingleValue result=40 Value=cccccccc 03:57:14 SkyScan query 03:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:57:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:14 Parameters OK 03:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:14 Set A/D data flow result=40 03:57:14 Set A/D channel type result=40 03:57:14 Set A/D encoding result=40 03:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:14 Set channel filter=0.000000e+000 result=40 03:57:14 Config A/D Result=40 03:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:14 Get A/D filter: -9.255963e+061 result=40 03:57:14 Get A/D value=-858993460 result=40 03:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:14 Parameters OK 03:57:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:14 Set A/D data flow result=40 03:57:14 Set A/D channel type result=40 03:57:14 Set A/D encoding result=40 03:57:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:14 Set channel filter=0.000000e+000 result=40 03:57:14 Config A/D Result=40 03:57:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:14 Get A/D filter: -9.255963e+061 result=40 03:57:14 Get A/D value=-858993460 result=40 03:57:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:14 Aux= 03:57:14 Message to Camera, serial 264260 queued 03:57:51 Received message from Master: op=PointingHead serial=264273 03:57:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:57:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:57:51 Point started: ret=0 03:57:51 point_skyscan result=0 03:57:52 Check angles 03:57:52 SkyScan query 03:57:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.88<-13592 Statuses=0008 0009 03:57:53 Msec=0 True Az=112.995 Ze=-23.88 Az status=0008 Ze status=0009 03:57:53 Check angles 03:57:53 SkyScan query 03:57:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.925<-14995 Statuses=0008 0009 03:57:53 Msec=750 True Az=112.995 Ze=-44.925 Az status=0008 Ze status=0009 03:57:54 Check angles 03:57:54 SkyScan query 03:57:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.775<-16385 Statuses=0008 0009 03:57:54 Msec=1500 True Az=112.995 Ze=-65.775 Az status=0008 Ze status=0009 03:57:54 Check angles 03:57:54 SkyScan query 03:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 03:57:55 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 03:57:55 Check angles 03:57:55 SkyScan query 03:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 03:57:56 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 03:57:56 Check angles 03:57:56 SkyScan query 03:57:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 03:57:56 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 03:57:57 Check angles 03:57:57 SkyScan query 03:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.58<-21972 Statuses=0008 0009 03:57:57 Msec=4500 True Az=112.995 Ze=-149.58 Az status=0008 Ze status=0009 03:57:57 Check angles 03:57:57 SkyScan query 03:57:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.505<-23367 Statuses=0008 0009 03:57:58 Msec=5250 True Az=112.995 Ze=-170.505 Az status=0008 Ze status=0009 03:57:58 Check angles 03:57:58 SkyScan query 03:57:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:57:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:57:59 Message to Master queued w/err=0: serial=264273 error=0 03:58:04 Received message from Master: op=Filter serial=264274 03:58:04 Color wheel filter change from 0 to 0 03:58:04 FLIGetFilterPos err=0 currentPosition=0 03:58:04 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:04 Filter is already there-color wheel unchanged 03:58:04 Received message from Master: op=Shutter serial=264275 03:58:04 Shutter LASER open 03:58:04 Received message from Camera: op=State serial=264277 03:58:04 GetSingleValue result=40 Value=cccccccc 03:58:04 SkyScan query 03:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:05 Parameters OK 03:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:05 Set A/D data flow result=40 03:58:05 Set A/D channel type result=40 03:58:05 Set A/D encoding result=40 03:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:05 Set channel filter=0.000000e+000 result=40 03:58:05 Config A/D Result=40 03:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:05 Get A/D filter: -9.255963e+061 result=40 03:58:05 Get A/D value=-858993460 result=40 03:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:05 Parameters OK 03:58:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:05 Set A/D data flow result=40 03:58:05 Set A/D channel type result=40 03:58:05 Set A/D encoding result=40 03:58:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:05 Set channel filter=0.000000e+000 result=40 03:58:05 Config A/D Result=40 03:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:05 Get A/D filter: -9.255963e+061 result=40 03:58:05 Get A/D value=-858993460 result=40 03:58:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:05 Aux= 03:58:05 Message to Camera, serial 264277 queued 03:58:13 Received message from Master: op=Shutter serial=264287 03:58:13 Shutter LASER close 03:58:13 Received message from Master: op=PointingHead serial=264291 03:58:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:58:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:58:14 Point started: ret=0 03:58:14 point_skyscan result=0 03:58:15 Check angles 03:58:15 SkyScan query 03:58:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 03:58:15 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 03:58:15 Check angles 03:58:15 SkyScan query 03:58:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 03:58:16 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 03:58:16 Check angles 03:58:16 SkyScan query 03:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 03:58:17 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 03:58:17 Check angles 03:58:17 SkyScan query 03:58:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.545<-17303 Statuses=0008 0009 03:58:17 Msec=2250 True Az=112.995 Ze=-79.545 Az status=0008 Ze status=0009 03:58:18 Check angles 03:58:18 SkyScan query 03:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.605<-15907 Statuses=0008 0009 03:58:18 Msec=3000 True Az=112.995 Ze=-58.605 Az status=0008 Ze status=0009 03:58:18 Check angles 03:58:18 SkyScan query 03:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.215<-14481 Statuses=0008 0009 03:58:19 Msec=3750 True Az=112.995 Ze=-37.215 Az status=0008 Ze status=0009 03:58:19 Check angles 03:58:19 SkyScan query 03:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.795<-13053 Statuses=0008 0009 03:58:20 Msec=4500 True Az=112.995 Ze=-15.795 Az status=0008 Ze status=0009 03:58:20 Check angles 03:58:20 SkyScan query 03:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=5.205<-11653 Statuses=0008 0009 03:58:20 Msec=5250 True Az=112.995 Ze=5.205 Az status=0008 Ze status=0009 03:58:21 Check angles 03:58:21 SkyScan query 03:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 03:58:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 03:58:21 Message to Master queued w/err=0: serial=264291 error=0 03:58:26 Received message from Master: op=Filter serial=264292 03:58:26 Color wheel filter change from 0 to 0 03:58:26 FLIGetFilterPos err=0 currentPosition=0 03:58:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:26 Filter is already there-color wheel unchanged 03:58:26 Received message from Master: op=Shutter serial=264293 03:58:26 Shutter LASER close 03:58:27 Received message from Camera: op=State serial=264295 03:58:27 GetSingleValue result=40 Value=cccccccc 03:58:27 SkyScan query 03:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:58:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:27 Parameters OK 03:58:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:27 Set A/D data flow result=40 03:58:27 Set A/D channel type result=40 03:58:27 Set A/D encoding result=40 03:58:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:27 Set channel filter=0.000000e+000 result=40 03:58:27 Config A/D Result=40 03:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:27 Get A/D filter: -9.255963e+061 result=40 03:58:27 Get A/D value=-858993460 result=40 03:58:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:27 Parameters OK 03:58:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:27 Set A/D data flow result=40 03:58:27 Set A/D channel type result=40 03:58:27 Set A/D encoding result=40 03:58:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:27 Set channel filter=0.000000e+000 result=40 03:58:27 Config A/D Result=40 03:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:27 Get A/D filter: -9.255963e+061 result=40 03:58:27 Get A/D value=-858993460 result=40 03:58:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:27 Aux= 03:58:27 Message to Camera, serial 264295 queued 03:59:03 Received message from Master: op=PointingHead serial=264307 03:59:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:59:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:59:03 Point started: ret=0 03:59:03 point_skyscan result=0 03:59:04 Check angles 03:59:04 SkyScan query 03:59:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:59:05 Message to Master queued w/err=0: serial=264307 error=0 03:59:10 Received message from Master: op=Filter serial=264308 03:59:10 Color wheel filter change from 0 to 0 03:59:10 FLIGetFilterPos err=0 currentPosition=0 03:59:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:10 Filter is already there-color wheel unchanged 03:59:10 Received message from Master: op=Shutter serial=264309 03:59:10 Shutter LASER close 03:59:10 Received message from Camera: op=State serial=264311 03:59:10 GetSingleValue result=40 Value=cccccccc 03:59:10 SkyScan query 03:59:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:10 Parameters OK 03:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:10 Set A/D data flow result=40 03:59:10 Set A/D channel type result=40 03:59:10 Set A/D encoding result=40 03:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:10 Set channel filter=0.000000e+000 result=40 03:59:10 Config A/D Result=40 03:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:10 Get A/D filter: -9.255963e+061 result=40 03:59:10 Get A/D value=-858993460 result=40 03:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:10 Parameters OK 03:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:10 Set A/D data flow result=40 03:59:10 Set A/D channel type result=40 03:59:10 Set A/D encoding result=40 03:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:10 Set channel filter=0.000000e+000 result=40 03:59:10 Config A/D Result=40 03:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:10 Get A/D filter: -9.255963e+061 result=40 03:59:10 Get A/D value=-858993460 result=40 03:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:10 Aux= 03:59:10 Message to Camera, serial 264311 queued 03:59:47 Received message from Master: op=PointingHead serial=264324 03:59:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 03:59:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 03:59:48 Point started: ret=0 03:59:48 point_skyscan result=0 03:59:48 Check angles 03:59:48 SkyScan query 03:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 03:59:49 Message to Master queued w/err=0: serial=264324 error=0 03:59:54 Received message from Master: op=Filter serial=264325 03:59:54 Color wheel filter change from 0 to 0 03:59:54 FLIGetFilterPos err=0 currentPosition=0 03:59:54 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:54 Filter is already there-color wheel unchanged 03:59:54 Received message from Master: op=Shutter serial=264326 03:59:54 Shutter LASER close 03:59:54 Received message from Camera: op=State serial=264328 03:59:54 GetSingleValue result=40 Value=cccccccc 03:59:54 SkyScan query 03:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 03:59:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:55 Parameters OK 03:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:55 Set A/D data flow result=40 03:59:55 Set A/D channel type result=40 03:59:55 Set A/D encoding result=40 03:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:55 Set channel filter=0.000000e+000 result=40 03:59:55 Config A/D Result=40 03:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:55 Get A/D filter: -9.255963e+061 result=40 03:59:55 Get A/D value=-858993460 result=40 03:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:55 Parameters OK 03:59:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:55 Set A/D data flow result=40 03:59:55 Set A/D channel type result=40 03:59:55 Set A/D encoding result=40 03:59:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:55 Set channel filter=0.000000e+000 result=40 03:59:55 Config A/D Result=40 03:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:55 Get A/D filter: -9.255963e+061 result=40 03:59:55 Get A/D value=-858993460 result=40 03:59:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:55 Aux= 03:59:55 Message to Camera, serial 264328 queued 04:00:32 Received message from Master: op=PointingHead serial=264341 04:00:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:00:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:00:32 Point started: ret=0 04:00:32 point_skyscan result=0 04:00:33 Check angles 04:00:33 SkyScan query 04:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:00:33 Message to Master queued w/err=0: serial=264341 error=0 04:00:38 Received message from Master: op=Filter serial=264342 04:00:38 Color wheel filter change from 0 to 0 04:00:38 FLIGetFilterPos err=0 currentPosition=0 04:00:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:38 Filter is already there-color wheel unchanged 04:00:38 Received message from Master: op=Shutter serial=264343 04:00:38 Shutter LASER close 04:00:39 Received message from Camera: op=State serial=264345 04:00:39 GetSingleValue result=40 Value=cccccccc 04:00:39 SkyScan query 04:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:00:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:39 Parameters OK 04:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:39 Set A/D data flow result=40 04:00:39 Set A/D channel type result=40 04:00:39 Set A/D encoding result=40 04:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:39 Set channel filter=0.000000e+000 result=40 04:00:39 Config A/D Result=40 04:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:39 Get A/D filter: -9.255963e+061 result=40 04:00:39 Get A/D value=-858993460 result=40 04:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:39 Parameters OK 04:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:39 Set A/D data flow result=40 04:00:39 Set A/D channel type result=40 04:00:39 Set A/D encoding result=40 04:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:39 Set channel filter=0.000000e+000 result=40 04:00:39 Config A/D Result=40 04:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:39 Get A/D filter: -9.255963e+061 result=40 04:00:39 Get A/D value=-858993460 result=40 04:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:39 Aux= 04:00:39 Message to Camera, serial 264345 queued 04:01:16 Received message from Master: op=PointingHead serial=264358 04:01:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:01:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:01:16 Point started: ret=0 04:01:16 point_skyscan result=0 04:01:17 Check angles 04:01:17 SkyScan query 04:01:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 04:01:18 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 04:01:18 Check angles 04:01:18 SkyScan query 04:01:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 04:01:18 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 04:01:19 Check angles 04:01:19 SkyScan query 04:01:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 04:01:19 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 04:01:19 Check angles 04:01:19 SkyScan query 04:01:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.955<-17797 Statuses=0008 0009 04:01:20 Msec=2250 True Az=112.995 Ze=-86.955 Az status=0008 Ze status=0009 04:01:20 Check angles 04:01:20 SkyScan query 04:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 04:01:21 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 04:01:21 Check angles 04:01:21 SkyScan query 04:01:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 04:01:21 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 04:01:22 Check angles 04:01:22 SkyScan query 04:01:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 04:01:22 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 04:01:22 Check angles 04:01:22 SkyScan query 04:01:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 04:01:23 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 04:01:23 Check angles 04:01:23 SkyScan query 04:01:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:01:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:01:24 Message to Master queued w/err=0: serial=264358 error=0 04:01:29 Received message from Master: op=Filter serial=264359 04:01:29 Color wheel filter change from 0 to 0 04:01:29 FLIGetFilterPos err=0 currentPosition=0 04:01:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:29 Filter is already there-color wheel unchanged 04:01:29 Received message from Master: op=Shutter serial=264360 04:01:29 Shutter LASER open 04:01:29 Received message from Camera: op=State serial=264362 04:01:29 GetSingleValue result=40 Value=cccccccc 04:01:29 SkyScan query 04:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:01:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:30 Parameters OK 04:01:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:30 Set A/D data flow result=40 04:01:30 Set A/D channel type result=40 04:01:30 Set A/D encoding result=40 04:01:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:30 Set channel filter=0.000000e+000 result=40 04:01:30 Config A/D Result=40 04:01:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:30 Get A/D filter: -9.255963e+061 result=40 04:01:30 Get A/D value=-858993460 result=40 04:01:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:30 Parameters OK 04:01:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:30 Set A/D data flow result=40 04:01:30 Set A/D channel type result=40 04:01:30 Set A/D encoding result=40 04:01:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:30 Set channel filter=0.000000e+000 result=40 04:01:30 Config A/D Result=40 04:01:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:30 Get A/D filter: -9.255963e+061 result=40 04:01:30 Get A/D value=-858993460 result=40 04:01:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:30 Aux= 04:01:30 Message to Camera, serial 264362 queued 04:01:38 Received message from Master: op=Shutter serial=264372 04:01:38 Shutter LASER close 04:01:39 Received message from Master: op=PointingHead serial=264376 04:01:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:01:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:01:39 Point started: ret=0 04:01:39 point_skyscan result=0 04:01:40 Check angles 04:01:40 SkyScan query 04:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 04:01:40 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 04:01:40 Check angles 04:01:40 SkyScan query 04:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 04:01:41 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 04:01:41 Check angles 04:01:41 SkyScan query 04:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 04:01:42 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 04:01:42 Check angles 04:01:42 SkyScan query 04:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 04:01:43 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 04:01:43 Check angles 04:01:43 SkyScan query 04:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 04:01:43 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 04:01:43 Check angles 04:01:43 SkyScan query 04:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 04:01:44 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 04:01:44 Check angles 04:01:44 SkyScan query 04:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 04:01:45 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 04:01:45 Check angles 04:01:45 SkyScan query 04:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 04:01:46 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 04:01:46 Check angles 04:01:46 SkyScan query 04:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:01:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:01:46 Message to Master queued w/err=0: serial=264376 error=0 04:01:51 Received message from Master: op=Filter serial=264377 04:01:51 Color wheel filter change from 0 to 0 04:01:51 FLIGetFilterPos err=0 currentPosition=0 04:01:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:51 Filter is already there-color wheel unchanged 04:01:51 Received message from Master: op=Shutter serial=264378 04:01:51 Shutter LASER close 04:01:52 Received message from Camera: op=State serial=264380 04:01:52 GetSingleValue result=40 Value=cccccccc 04:01:52 SkyScan query 04:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:01:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:52 Parameters OK 04:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:52 Set A/D data flow result=40 04:01:52 Set A/D channel type result=40 04:01:52 Set A/D encoding result=40 04:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:52 Set channel filter=0.000000e+000 result=40 04:01:52 Config A/D Result=40 04:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:52 Get A/D filter: -9.255963e+061 result=40 04:01:52 Get A/D value=-858993460 result=40 04:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:52 Parameters OK 04:01:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:52 Set A/D data flow result=40 04:01:52 Set A/D channel type result=40 04:01:52 Set A/D encoding result=40 04:01:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:52 Set channel filter=0.000000e+000 result=40 04:01:52 Config A/D Result=40 04:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:52 Get A/D filter: -9.255963e+061 result=40 04:01:52 Get A/D value=-858993460 result=40 04:01:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:52 Aux= 04:01:52 Message to Camera, serial 264380 queued 04:02:29 Received message from Master: op=PointingHead serial=264393 04:02:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:02:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:02:29 Point started: ret=0 04:02:29 point_skyscan result=0 04:02:30 Check angles 04:02:30 SkyScan query 04:02:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:02:31 Message to Master queued w/err=0: serial=264393 error=0 04:02:36 Received message from Master: op=Filter serial=264394 04:02:36 Color wheel filter change from 0 to 0 04:02:36 FLIGetFilterPos err=0 currentPosition=0 04:02:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:36 Filter is already there-color wheel unchanged 04:02:36 Received message from Master: op=Shutter serial=264395 04:02:36 Shutter LASER close 04:02:36 Received message from Camera: op=State serial=264397 04:02:36 GetSingleValue result=40 Value=cccccccc 04:02:36 SkyScan query 04:02:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:02:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:36 Parameters OK 04:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:36 Set A/D data flow result=40 04:02:36 Set A/D channel type result=40 04:02:36 Set A/D encoding result=40 04:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:36 Set channel filter=0.000000e+000 result=40 04:02:36 Config A/D Result=40 04:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:36 Get A/D filter: -9.255963e+061 result=40 04:02:36 Get A/D value=-858993460 result=40 04:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:36 Parameters OK 04:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:36 Set A/D data flow result=40 04:02:36 Set A/D channel type result=40 04:02:36 Set A/D encoding result=40 [UTC 2019-3-14 04:02:36] 04:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:37 Set channel filter=0.000000e+000 result=40 04:02:37 Config A/D Result=40 04:02:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:37 Get A/D filter: -9.255963e+061 result=40 04:02:37 Get A/D value=-858993460 result=40 04:02:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:37 Aux= 04:02:37 Message to Camera, serial 264397 queued 04:03:13 Received message from Master: op=PointingHead serial=264410 04:03:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:03:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:03:14 Point started: ret=0 04:03:14 point_skyscan result=0 04:03:14 Check angles 04:03:14 SkyScan query 04:03:15 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 04:03:15 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 04:03:15 Check angles 04:03:15 SkyScan query 04:03:16 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 04:03:16 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 04:03:16 Check angles 04:03:16 SkyScan query 04:03:17 SkyScan query done: ret=0 az=171.465<-11431 ze=-6.495<-12433 Statuses=0009 0008 04:03:17 Msec=1500 True Az=171.465 Ze=-6.495 Az status=0009 Ze status=0008 04:03:17 Check angles 04:03:17 SkyScan query 04:03:17 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:03:17 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:03:17 Message to Master queued w/err=0: serial=264410 error=0 04:03:22 Received message from Master: op=Filter serial=264411 04:03:22 Color wheel filter change from 0 to 0 04:03:22 FLIGetFilterPos err=0 currentPosition=0 04:03:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:22 Filter is already there-color wheel unchanged 04:03:23 Received message from Master: op=Shutter serial=264412 04:03:23 Shutter LASER close 04:03:23 Received message from Camera: op=State serial=264414 04:03:23 GetSingleValue result=40 Value=cccccccc 04:03:23 SkyScan query 04:03:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:03:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:23 Parameters OK 04:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:23 Set A/D data flow result=40 04:03:23 Set A/D channel type result=40 04:03:23 Set A/D encoding result=40 04:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:23 Set channel filter=0.000000e+000 result=40 04:03:23 Config A/D Result=40 04:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:23 Get A/D filter: -9.255963e+061 result=40 04:03:23 Get A/D value=-858993460 result=40 04:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:23 Parameters OK 04:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:23 Set A/D data flow result=40 04:03:23 Set A/D channel type result=40 04:03:23 Set A/D encoding result=40 04:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:23 Set channel filter=0.000000e+000 result=40 04:03:23 Config A/D Result=40 04:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:23 Get A/D filter: -9.255963e+061 result=40 04:03:23 Get A/D value=-858993460 result=40 04:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:23 Aux= 04:03:23 Message to Camera, serial 264414 queued 04:03:35 Received message from Master: op=Identify serial=264415 [UTC 2019-3-14 04:03:48] 04:04:00 Received message from Master: op=PointingHead serial=264430 04:04:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:04:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:04:00 Point started: ret=0 04:04:00 point_skyscan result=0 04:04:01 Check angles 04:04:01 SkyScan query 04:04:02 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 04:04:02 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 04:04:02 Check angles 04:04:02 SkyScan query 04:04:02 SkyScan query done: ret=0 az=135.195<-9013 ze=6.495<-11567 Statuses=0009 0008 04:04:02 Msec=750 True Az=135.195 Ze=6.495 Az status=0009 Ze status=0008 04:04:03 Check angles 04:04:03 SkyScan query 04:04:03 SkyScan query done: ret=0 az=117.36<-7824 ze=6.495<-11567 Statuses=0009 0008 04:04:03 Msec=1500 True Az=117.36 Ze=6.495 Az status=0009 Ze status=0008 04:04:03 Check angles 04:04:03 SkyScan query 04:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:04:04 Message to Master queued w/err=0: serial=264430 error=0 04:04:09 Received message from Master: op=Filter serial=264431 04:04:09 Color wheel filter change from 0 to 0 04:04:09 FLIGetFilterPos err=0 currentPosition=0 04:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:09 Filter is already there-color wheel unchanged 04:04:09 Received message from Master: op=Shutter serial=264432 04:04:09 Shutter LASER close 04:04:09 Received message from Camera: op=State serial=264434 04:04:09 GetSingleValue result=40 Value=cccccccc 04:04:09 SkyScan query 04:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:10 Parameters OK 04:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:10 Set A/D data flow result=40 04:04:10 Set A/D channel type result=40 04:04:10 Set A/D encoding result=40 04:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:10 Set channel filter=0.000000e+000 result=40 04:04:10 Config A/D Result=40 04:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:10 Get A/D filter: -9.255963e+061 result=40 04:04:10 Get A/D value=-858993460 result=40 04:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:10 Parameters OK 04:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:10 Set A/D data flow result=40 04:04:10 Set A/D channel type result=40 04:04:10 Set A/D encoding result=40 04:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:10 Set channel filter=0.000000e+000 result=40 04:04:10 Config A/D Result=40 04:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:10 Get A/D filter: -9.255963e+061 result=40 04:04:10 Get A/D value=-858993460 result=40 04:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:10 Aux= 04:04:10 Message to Camera, serial 264434 queued 04:04:47 Received message from Master: op=PointingHead serial=264447 04:04:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:04:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:04:47 Point started: ret=0 04:04:47 point_skyscan result=0 04:04:48 Check angles 04:04:48 SkyScan query 04:04:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 04:04:48 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 04:04:48 Check angles 04:04:48 SkyScan query 04:04:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 04:04:49 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 04:04:49 Check angles 04:04:49 SkyScan query 04:04:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 04:04:50 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 04:04:50 Check angles 04:04:50 SkyScan query 04:04:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.16<-17744 Statuses=0008 0009 04:04:50 Msec=2250 True Az=112.995 Ze=-86.16 Az status=0008 Ze status=0009 04:04:51 Check angles 04:04:51 SkyScan query 04:04:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.1<-19140 Statuses=0008 0009 04:04:51 Msec=3000 True Az=112.995 Ze=-107.1 Az status=0008 Ze status=0009 04:04:51 Check angles 04:04:51 SkyScan query 04:04:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.055<-20537 Statuses=0008 0009 04:04:52 Msec=3750 True Az=112.995 Ze=-128.055 Az status=0008 Ze status=0009 04:04:52 Check angles 04:04:52 SkyScan query 04:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 04:04:53 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 04:04:53 Check angles 04:04:53 SkyScan query 04:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.965<-23331 Statuses=0008 0009 04:04:53 Msec=5250 True Az=112.995 Ze=-169.965 Az status=0008 Ze status=0009 04:04:54 Check angles 04:04:54 SkyScan query 04:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:04:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:04:54 Message to Master queued w/err=0: serial=264447 error=0 04:04:59 Received message from Master: op=Filter serial=264448 04:04:59 Color wheel filter change from 0 to 0 04:04:59 FLIGetFilterPos err=0 currentPosition=0 04:04:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:59 Filter is already there-color wheel unchanged 04:04:59 Received message from Master: op=Shutter serial=264449 04:04:59 Shutter LASER open 04:05:00 Received message from Camera: op=State serial=264451 04:05:00 GetSingleValue result=40 Value=cccccccc 04:05:00 SkyScan query 04:05:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:00 Parameters OK 04:05:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:00 Set A/D data flow result=40 04:05:00 Set A/D channel type result=40 04:05:00 Set A/D encoding result=40 04:05:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:00 Set channel filter=0.000000e+000 result=40 04:05:00 Config A/D Result=40 04:05:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:00 Get A/D filter: -9.255963e+061 result=40 04:05:00 Get A/D value=-858993460 result=40 04:05:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:00 Parameters OK 04:05:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:00 Set A/D data flow result=40 04:05:00 Set A/D channel type result=40 04:05:00 Set A/D encoding result=40 04:05:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:00 Set channel filter=0.000000e+000 result=40 04:05:00 Config A/D Result=40 04:05:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:00 Get A/D filter: -9.255963e+061 result=40 04:05:00 Get A/D value=-858993460 result=40 04:05:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:00 Aux= 04:05:00 Message to Camera, serial 264451 queued 04:05:09 Received message from Master: op=Shutter serial=264461 04:05:09 Shutter LASER close 04:05:09 Received message from Master: op=PointingHead serial=264465 04:05:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:05:09 Point started: ret=0 04:05:09 point_skyscan result=0 04:05:10 Check angles 04:05:10 SkyScan query 04:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 04:05:11 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 04:05:11 Check angles 04:05:11 SkyScan query 04:05:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.65<-20110 Statuses=0008 0009 04:05:11 Msec=750 True Az=112.995 Ze=-121.65 Az status=0008 Ze status=0009 04:05:12 Check angles 04:05:12 SkyScan query 04:05:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 04:05:12 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 04:05:12 Check angles 04:05:12 SkyScan query 04:05:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 04:05:13 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 04:05:13 Check angles 04:05:13 SkyScan query 04:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 04:05:14 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 04:05:14 Check angles 04:05:14 SkyScan query 04:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.83<-14522 Statuses=0008 0009 04:05:14 Msec=3750 True Az=112.995 Ze=-37.83 Az status=0008 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 04:05:15 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 04:05:15 Check angles 04:05:15 SkyScan query 04:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 04:05:16 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 04:05:16 Check angles 04:05:16 SkyScan query 04:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:05:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:05:17 Message to Master queued w/err=0: serial=264465 error=0 04:05:22 Received message from Master: op=Filter serial=264466 04:05:22 Color wheel filter change from 0 to 0 04:05:22 FLIGetFilterPos err=0 currentPosition=0 04:05:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:22 Filter is already there-color wheel unchanged 04:05:22 Received message from Master: op=Shutter serial=264467 04:05:22 Shutter LASER close 04:05:22 Received message from Camera: op=State serial=264469 04:05:22 GetSingleValue result=40 Value=cccccccc 04:05:22 SkyScan query 04:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:05:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:23 Parameters OK 04:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:23 Set A/D data flow result=40 04:05:23 Set A/D channel type result=40 04:05:23 Set A/D encoding result=40 04:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:23 Set channel filter=0.000000e+000 result=40 04:05:23 Config A/D Result=40 04:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:23 Get A/D filter: -9.255963e+061 result=40 04:05:23 Get A/D value=-858993460 result=40 04:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:23 Parameters OK 04:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:23 Set A/D data flow result=40 04:05:23 Set A/D channel type result=40 04:05:23 Set A/D encoding result=40 04:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:23 Set channel filter=0.000000e+000 result=40 04:05:23 Config A/D Result=40 04:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:23 Get A/D filter: -9.255963e+061 result=40 04:05:23 Get A/D value=-858993460 result=40 04:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:23 Aux= 04:05:23 Message to Camera, serial 264469 queued 04:05:59 Received message from Master: op=PointingHead serial=264482 04:05:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:05:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:06:00 Point started: ret=0 04:06:00 point_skyscan result=0 04:06:01 Check angles 04:06:01 SkyScan query 04:06:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:06:01 Message to Master queued w/err=0: serial=264482 error=0 04:06:06 Received message from Master: op=Filter serial=264483 04:06:06 Color wheel filter change from 0 to 0 04:06:06 FLIGetFilterPos err=0 currentPosition=0 04:06:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:06 Filter is already there-color wheel unchanged 04:06:06 Received message from Master: op=Shutter serial=264484 04:06:06 Shutter LASER close 04:06:06 Received message from Camera: op=State serial=264486 04:06:06 GetSingleValue result=40 Value=cccccccc 04:06:06 SkyScan query 04:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:07 Parameters OK 04:06:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:07 Set A/D data flow result=40 04:06:07 Set A/D channel type result=40 04:06:07 Set A/D encoding result=40 04:06:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:07 Set channel filter=0.000000e+000 result=40 04:06:07 Config A/D Result=40 04:06:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:07 Get A/D filter: -9.255963e+061 result=40 04:06:07 Get A/D value=-858993460 result=40 04:06:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:07 Parameters OK 04:06:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:07 Set A/D data flow result=40 04:06:07 Set A/D channel type result=40 04:06:07 Set A/D encoding result=40 04:06:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:07 Set channel filter=0.000000e+000 result=40 04:06:07 Config A/D Result=40 04:06:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:07 Get A/D filter: -9.255963e+061 result=40 04:06:07 Get A/D value=-858993460 result=40 04:06:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:07 Aux= 04:06:07 Message to Camera, serial 264486 queued 04:06:44 Received message from Master: op=PointingHead serial=264499 04:06:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:06:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:06:44 Point started: ret=0 04:06:44 point_skyscan result=0 04:06:45 Check angles 04:06:45 SkyScan query 04:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:06:45 Message to Master queued w/err=0: serial=264499 error=0 04:06:50 Received message from Master: op=Filter serial=264500 04:06:50 Color wheel filter change from 0 to 0 04:06:50 FLIGetFilterPos err=0 currentPosition=0 04:06:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:50 Filter is already there-color wheel unchanged 04:06:51 Received message from Master: op=Shutter serial=264501 04:06:51 Shutter LASER close 04:06:51 Received message from Camera: op=State serial=264503 04:06:51 GetSingleValue result=40 Value=cccccccc 04:06:51 SkyScan query 04:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:06:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:51 Parameters OK 04:06:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:51 Set A/D data flow result=40 04:06:51 Set A/D channel type result=40 04:06:51 Set A/D encoding result=40 04:06:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:51 Set channel filter=0.000000e+000 result=40 04:06:51 Config A/D Result=40 04:06:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:51 Get A/D filter: -9.255963e+061 result=40 04:06:51 Get A/D value=-858993460 result=40 04:06:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:51 Parameters OK 04:06:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:51 Set A/D data flow result=40 04:06:51 Set A/D channel type result=40 04:06:51 Set A/D encoding result=40 04:06:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:51 Set channel filter=0.000000e+000 result=40 04:06:51 Config A/D Result=40 04:06:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:51 Get A/D filter: -9.255963e+061 result=40 04:06:51 Get A/D value=-858993460 result=40 04:06:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:51 Aux= 04:06:51 Message to Camera, serial 264503 queued 04:07:27 Received message from Master: op=PointingHead serial=264515 04:07:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:07:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:07:27 Point started: ret=0 04:07:27 point_skyscan result=0 04:07:28 Check angles 04:07:28 SkyScan query 04:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:07:29 Message to Master queued w/err=0: serial=264515 error=0 04:07:34 Received message from Master: op=Filter serial=264516 04:07:34 Color wheel filter change from 0 to 0 04:07:34 FLIGetFilterPos err=0 currentPosition=0 04:07:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:34 Filter is already there-color wheel unchanged 04:07:34 Received message from Master: op=Shutter serial=264517 04:07:34 Shutter LASER close 04:07:34 Received message from Camera: op=State serial=264519 04:07:34 GetSingleValue result=40 Value=cccccccc 04:07:34 SkyScan query 04:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:07:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:35 Parameters OK 04:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:35 Set A/D data flow result=40 04:07:35 Set A/D channel type result=40 04:07:35 Set A/D encoding result=40 04:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:35 Set channel filter=0.000000e+000 result=40 04:07:35 Config A/D Result=40 04:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:35 Get A/D filter: -9.255963e+061 result=40 04:07:35 Get A/D value=-858993460 result=40 04:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:35 Parameters OK 04:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:35 Set A/D data flow result=40 04:07:35 Set A/D channel type result=40 04:07:35 Set A/D encoding result=40 04:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:35 Set channel filter=0.000000e+000 result=40 04:07:35 Config A/D Result=40 04:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:35 Get A/D filter: -9.255963e+061 result=40 04:07:35 Get A/D value=-858993460 result=40 04:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:35 Aux= 04:07:35 Message to Camera, serial 264519 queued 04:08:11 Received message from Master: op=PointingHead serial=264532 04:08:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:12 Point started: ret=0 04:08:12 point_skyscan result=0 04:08:12 Check angles 04:08:12 SkyScan query 04:08:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 04:08:13 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 04:08:13 Check angles 04:08:13 SkyScan query 04:08:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 04:08:14 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 04:08:14 Check angles 04:08:14 SkyScan query 04:08:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 04:08:15 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 04:08:15 Check angles 04:08:15 SkyScan query 04:08:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 04:08:15 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 04:08:15 Check angles 04:08:15 SkyScan query 04:08:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 04:08:16 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 04:08:16 Check angles 04:08:16 SkyScan query 04:08:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.79<-20586 Statuses=0008 0009 04:08:17 Msec=3750 True Az=112.995 Ze=-128.79 Az status=0008 Ze status=0009 04:08:17 Check angles 04:08:17 SkyScan query 04:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 04:08:18 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 04:08:18 Check angles 04:08:18 SkyScan query 04:08:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 04:08:18 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 04:08:19 Check angles 04:08:19 SkyScan query 04:08:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:08:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:08:19 Message to Master queued w/err=0: serial=264532 error=0 04:08:24 Received message from Master: op=Filter serial=264533 04:08:24 Color wheel filter change from 0 to 0 04:08:24 FLIGetFilterPos err=0 currentPosition=0 04:08:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:24 Filter is already there-color wheel unchanged 04:08:24 Received message from Master: op=Shutter serial=264534 04:08:24 Shutter LASER open 04:08:25 Received message from Camera: op=State serial=264536 04:08:25 GetSingleValue result=40 Value=cccccccc 04:08:25 SkyScan query 04:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:08:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:25 Parameters OK 04:08:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:25 Set A/D data flow result=40 04:08:25 Set A/D channel type result=40 04:08:25 Set A/D encoding result=40 04:08:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:25 Set channel filter=0.000000e+000 result=40 04:08:25 Config A/D Result=40 04:08:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:25 Get A/D filter: -9.255963e+061 result=40 04:08:25 Get A/D value=-858993460 result=40 04:08:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:25 Parameters OK 04:08:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:25 Set A/D data flow result=40 04:08:25 Set A/D channel type result=40 04:08:25 Set A/D encoding result=40 04:08:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:25 Set channel filter=0.000000e+000 result=40 04:08:25 Config A/D Result=40 04:08:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:25 Get A/D filter: -9.255963e+061 result=40 04:08:25 Get A/D value=-858993460 result=40 04:08:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:25 Aux= 04:08:25 Message to Camera, serial 264536 queued 04:08:34 Received message from Master: op=Shutter serial=264546 04:08:34 Shutter LASER close 04:08:34 Received message from Master: op=PointingHead serial=264550 04:08:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:08:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:08:35 Point started: ret=0 04:08:35 point_skyscan result=0 04:08:35 Check angles 04:08:35 SkyScan query 04:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 04:08:36 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 04:08:36 Check angles 04:08:36 SkyScan query 04:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 04:08:37 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 04:08:37 Check angles 04:08:37 SkyScan query 04:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.485<-18699 Statuses=0008 0009 04:08:37 Msec=1500 True Az=112.995 Ze=-100.485 Az status=0008 Ze status=0009 04:08:38 Check angles 04:08:38 SkyScan query 04:08:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 04:08:38 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 04:08:38 Check angles 04:08:38 SkyScan query 04:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 04:08:39 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 04:08:39 Check angles 04:08:39 SkyScan query 04:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 04:08:40 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 04:08:40 Check angles 04:08:40 SkyScan query 04:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 04:08:40 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 04:08:41 Check angles 04:08:41 SkyScan query 04:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 04:08:41 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 04:08:41 Check angles 04:08:41 SkyScan query 04:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:08:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:08:42 Message to Master queued w/err=0: serial=264550 error=0 04:08:47 Received message from Master: op=Filter serial=264551 04:08:47 Color wheel filter change from 0 to 0 04:08:47 FLIGetFilterPos err=0 currentPosition=0 04:08:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:47 Filter is already there-color wheel unchanged 04:08:47 Received message from Master: op=Shutter serial=264552 04:08:47 Shutter LASER close 04:08:47 Received message from Camera: op=State serial=264554 04:08:47 GetSingleValue result=40 Value=cccccccc 04:08:47 SkyScan query 04:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:08:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:48 Parameters OK 04:08:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:48 Set A/D data flow result=40 04:08:48 Set A/D channel type result=40 04:08:48 Set A/D encoding result=40 04:08:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:48 Set channel filter=0.000000e+000 result=40 04:08:48 Config A/D Result=40 04:08:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:48 Get A/D filter: -9.255963e+061 result=40 04:08:48 Get A/D value=-858993460 result=40 04:08:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:48 Parameters OK 04:08:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:48 Set A/D data flow result=40 04:08:48 Set A/D channel type result=40 04:08:48 Set A/D encoding result=40 04:08:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:48 Set channel filter=0.000000e+000 result=40 04:08:48 Config A/D Result=40 04:08:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:48 Get A/D filter: -9.255963e+061 result=40 04:08:48 Get A/D value=-858993460 result=40 04:08:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:48 Aux= 04:08:48 Message to Camera, serial 264554 queued 04:09:25 Received message from Master: op=PointingHead serial=264567 04:09:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:09:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:09:25 Point started: ret=0 04:09:25 point_skyscan result=0 04:09:26 Check angles 04:09:26 SkyScan query 04:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:09:26 Message to Master queued w/err=0: serial=264567 error=0 04:09:31 Received message from Master: op=Filter serial=264568 04:09:31 Color wheel filter change from 0 to 0 04:09:31 FLIGetFilterPos err=0 currentPosition=0 04:09:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:31 Filter is already there-color wheel unchanged 04:09:31 Received message from Master: op=Shutter serial=264569 04:09:31 Shutter LASER close 04:09:32 Received message from Camera: op=State serial=264571 04:09:32 GetSingleValue result=40 Value=cccccccc 04:09:32 SkyScan query 04:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:09:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:32 Parameters OK 04:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:32 Set A/D data flow result=40 04:09:32 Set A/D channel type result=40 04:09:32 Set A/D encoding result=40 04:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:32 Set channel filter=0.000000e+000 result=40 04:09:32 Config A/D Result=40 04:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:32 Get A/D filter: -9.255963e+061 result=40 04:09:32 Get A/D value=-858993460 result=40 04:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:32 Parameters OK 04:09:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:32 Set A/D data flow result=40 04:09:32 Set A/D channel type result=40 04:09:32 Set A/D encoding result=40 04:09:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:32 Set channel filter=0.000000e+000 result=40 04:09:32 Config A/D Result=40 04:09:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:32 Get A/D filter: -9.255963e+061 result=40 04:09:32 Get A/D value=-858993460 result=40 04:09:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:32 Aux= 04:09:32 Message to Camera, serial 264571 queued 04:10:09 Received message from Master: op=PointingHead serial=264584 04:10:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:10:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:10:09 Point started: ret=0 04:10:09 point_skyscan result=0 04:10:10 Check angles 04:10:10 SkyScan query 04:10:11 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 04:10:11 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 04:10:11 Check angles 04:10:11 SkyScan query 04:10:11 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 04:10:11 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 04:10:12 Check angles 04:10:12 SkyScan query 04:10:12 SkyScan query done: ret=0 az=171.21<-11414 ze=-6.495<-12433 Statuses=0009 0008 04:10:12 Msec=1500 True Az=171.21 Ze=-6.495 Az status=0009 Ze status=0008 04:10:12 Check angles 04:10:12 SkyScan query 04:10:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:10:13 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:10:13 Message to Master queued w/err=0: serial=264584 error=0 04:10:18 Received message from Master: op=Filter serial=264585 04:10:18 Color wheel filter change from 0 to 0 04:10:18 FLIGetFilterPos err=0 currentPosition=0 04:10:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:18 Filter is already there-color wheel unchanged 04:10:18 Received message from Master: op=Shutter serial=264586 04:10:18 Shutter LASER close 04:10:18 Received message from Camera: op=State serial=264588 04:10:18 GetSingleValue result=40 Value=cccccccc 04:10:18 SkyScan query 04:10:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:19 Parameters OK 04:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:19 Set A/D data flow result=40 04:10:19 Set A/D channel type result=40 04:10:19 Set A/D encoding result=40 04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:19 Set channel filter=0.000000e+000 result=40 04:10:19 Config A/D Result=40 04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:19 Get A/D filter: -9.255963e+061 result=40 04:10:19 Get A/D value=-858993460 result=40 04:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:19 Parameters OK 04:10:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:19 Set A/D data flow result=40 04:10:19 Set A/D channel type result=40 04:10:19 Set A/D encoding result=40 04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:19 Set channel filter=0.000000e+000 result=40 04:10:19 Config A/D Result=40 04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:19 Get A/D filter: -9.255963e+061 result=40 04:10:19 Get A/D value=-858993460 result=40 04:10:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:19 Aux= 04:10:19 Message to Camera, serial 264588 queued 04:10:55 Received message from Master: op=PointingHead serial=264601 04:10:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:10:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:10:56 Point started: ret=0 04:10:56 point_skyscan result=0 04:10:57 Check angles 04:10:57 SkyScan query 04:10:57 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 04:10:57 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 04:10:57 Check angles 04:10:57 SkyScan query 04:10:58 SkyScan query done: ret=0 az=135.615<-9041 ze=6.495<-11567 Statuses=0009 0008 04:10:58 Msec=750 True Az=135.615 Ze=6.495 Az status=0009 Ze status=0008 04:10:58 Check angles 04:10:58 SkyScan query 04:10:59 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 04:10:59 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 04:10:59 Check angles 04:10:59 SkyScan query 04:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:10:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:10:59 Message to Master queued w/err=0: serial=264601 error=0 04:11:04 Received message from Master: op=Filter serial=264602 04:11:04 Color wheel filter change from 0 to 0 04:11:04 FLIGetFilterPos err=0 currentPosition=0 04:11:04 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:04 Filter is already there-color wheel unchanged 04:11:05 Received message from Master: op=Shutter serial=264603 04:11:05 Shutter LASER close 04:11:05 Received message from Camera: op=State serial=264605 04:11:05 GetSingleValue result=40 Value=cccccccc 04:11:05 SkyScan query 04:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:11:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:05 Parameters OK 04:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:05 Set A/D data flow result=40 04:11:05 Set A/D channel type result=40 04:11:05 Set A/D encoding result=40 04:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:05 Set channel filter=0.000000e+000 result=40 04:11:05 Config A/D Result=40 04:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:05 Get A/D filter: -9.255963e+061 result=40 04:11:05 Get A/D value=-858993460 result=40 04:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:05 Parameters OK 04:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:05 Set A/D data flow result=40 04:11:05 Set A/D channel type result=40 04:11:05 Set A/D encoding result=40 04:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:05 Set channel filter=0.000000e+000 result=40 04:11:05 Config A/D Result=40 04:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:05 Get A/D filter: -9.255963e+061 result=40 04:11:05 Get A/D value=-858993460 result=40 04:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:05 Aux= 04:11:05 Message to Camera, serial 264605 queued 04:11:42 Received message from Master: op=PointingHead serial=264618 04:11:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:11:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:11:42 Point started: ret=0 04:11:42 point_skyscan result=0 04:11:43 Check angles 04:11:43 SkyScan query 04:11:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 04:11:44 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 04:11:44 Check angles 04:11:44 SkyScan query 04:11:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.025<-14935 Statuses=0008 0009 04:11:44 Msec=750 True Az=112.995 Ze=-44.025 Az status=0008 Ze status=0009 04:11:45 Check angles 04:11:45 SkyScan query 04:11:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 04:11:45 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 04:11:45 Check angles 04:11:45 SkyScan query 04:11:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 04:11:46 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 04:11:46 Check angles 04:11:46 SkyScan query 04:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 04:11:47 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 04:11:47 Check angles 04:11:47 SkyScan query 04:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 04:11:47 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 04:11:48 Check angles 04:11:48 SkyScan query 04:11:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 04:11:48 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 04:11:48 Check angles 04:11:48 SkyScan query 04:11:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 04:11:49 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 04:11:49 Check angles 04:11:49 SkyScan query 04:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:11:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:11:50 Message to Master queued w/err=0: serial=264618 error=0 04:11:55 Received message from Master: op=Filter serial=264619 04:11:55 Color wheel filter change from 0 to 0 04:11:55 FLIGetFilterPos err=0 currentPosition=0 04:11:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:55 Filter is already there-color wheel unchanged 04:11:55 Received message from Master: op=Shutter serial=264620 04:11:55 Shutter LASER open 04:11:55 Received message from Camera: op=State serial=264622 04:11:55 GetSingleValue result=40 Value=cccccccc 04:11:55 SkyScan query 04:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:11:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:56 Parameters OK 04:11:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:56 Set A/D data flow result=40 04:11:56 Set A/D channel type result=40 04:11:56 Set A/D encoding result=40 04:11:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:56 Set channel filter=0.000000e+000 result=40 04:11:56 Config A/D Result=40 04:11:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:56 Get A/D filter: -9.255963e+061 result=40 04:11:56 Get A/D value=-858993460 result=40 04:11:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:56 Parameters OK 04:11:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:56 Set A/D data flow result=40 04:11:56 Set A/D channel type result=40 04:11:56 Set A/D encoding result=40 04:11:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:56 Set channel filter=0.000000e+000 result=40 04:11:56 Config A/D Result=40 04:11:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:56 Get A/D filter: -9.255963e+061 result=40 04:11:56 Get A/D value=-858993460 result=40 04:11:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:56 Aux= 04:11:56 Message to Camera, serial 264622 queued 04:12:04 Received message from Master: op=Shutter serial=264632 04:12:04 Shutter LASER close 04:12:04 Received message from Master: op=PointingHead serial=264636 04:12:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:05 Point started: ret=0 04:12:05 point_skyscan result=0 04:12:06 Check angles 04:12:06 SkyScan query 04:12:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 04:12:06 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 04:12:06 Check angles 04:12:06 SkyScan query 04:12:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 04:12:07 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 04:12:07 Check angles 04:12:07 SkyScan query 04:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.695<-18713 Statuses=0008 0009 04:12:08 Msec=1500 True Az=112.995 Ze=-100.695 Az status=0008 Ze status=0009 04:12:08 Check angles 04:12:08 SkyScan query 04:12:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.275<-17285 Statuses=0008 0009 04:12:08 Msec=2250 True Az=112.995 Ze=-79.275 Az status=0008 Ze status=0009 04:12:09 Check angles 04:12:09 SkyScan query 04:12:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.885<-15859 Statuses=0008 0009 04:12:09 Msec=3000 True Az=112.995 Ze=-57.885 Az status=0008 Ze status=0009 04:12:09 Check angles 04:12:09 SkyScan query 04:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.945<-14463 Statuses=0008 0009 04:12:10 Msec=3750 True Az=112.995 Ze=-36.945 Az status=0008 Ze status=0009 04:12:10 Check angles 04:12:10 SkyScan query 04:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.525<-13035 Statuses=0008 0009 04:12:11 Msec=4500 True Az=112.995 Ze=-15.525 Az status=0008 Ze status=0009 04:12:11 Check angles 04:12:11 SkyScan query 04:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=5.355<-11643 Statuses=0008 0009 04:12:11 Msec=5250 True Az=112.995 Ze=5.355 Az status=0008 Ze status=0009 04:12:12 Check angles 04:12:12 SkyScan query 04:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:12:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:12:12 Message to Master queued w/err=0: serial=264636 error=0 04:12:17 Received message from Master: op=Filter serial=264637 04:12:17 Color wheel filter change from 0 to 0 04:12:17 FLIGetFilterPos err=0 currentPosition=0 04:12:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:17 Filter is already there-color wheel unchanged 04:12:17 Received message from Master: op=Shutter serial=264638 04:12:17 Shutter LASER close 04:12:18 Received message from Camera: op=State serial=264640 04:12:18 GetSingleValue result=40 Value=cccccccc 04:12:18 SkyScan query 04:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:18 Parameters OK 04:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:18 Set A/D data flow result=40 04:12:18 Set A/D channel type result=40 04:12:18 Set A/D encoding result=40 04:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:18 Set channel filter=0.000000e+000 result=40 04:12:18 Config A/D Result=40 04:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:18 Get A/D filter: -9.255963e+061 result=40 04:12:18 Get A/D value=-858993460 result=40 04:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:18 Parameters OK 04:12:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:18 Set A/D data flow result=40 04:12:18 Set A/D channel type result=40 04:12:18 Set A/D encoding result=40 04:12:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:18 Set channel filter=0.000000e+000 result=40 04:12:18 Config A/D Result=40 04:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:18 Get A/D filter: -9.255963e+061 result=40 04:12:18 Get A/D value=-858993460 result=40 04:12:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:18 Aux= 04:12:18 Message to Camera, serial 264640 queued 04:12:55 Received message from Master: op=PointingHead serial=264653 04:12:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:12:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:12:55 Point started: ret=0 04:12:55 point_skyscan result=0 04:12:56 Check angles 04:12:56 SkyScan query 04:12:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:12:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:12:57 Message to Master queued w/err=0: serial=264653 error=0 04:13:02 Received message from Master: op=Filter serial=264654 04:13:02 Color wheel filter change from 0 to 0 04:13:02 FLIGetFilterPos err=0 currentPosition=0 04:13:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:02 Filter is already there-color wheel unchanged 04:13:02 Received message from Master: op=Shutter serial=264655 04:13:02 Shutter LASER close 04:13:02 Received message from Camera: op=State serial=264657 04:13:02 GetSingleValue result=40 Value=cccccccc 04:13:02 SkyScan query 04:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:03 Parameters OK 04:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:03 Set A/D data flow result=40 04:13:03 Set A/D channel type result=40 04:13:03 Set A/D encoding result=40 04:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:03 Set channel filter=0.000000e+000 result=40 04:13:03 Config A/D Result=40 04:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:03 Get A/D filter: -9.255963e+061 result=40 04:13:03 Get A/D value=-858993460 result=40 04:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:03 Parameters OK 04:13:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:03 Set A/D data flow result=40 04:13:03 Set A/D channel type result=40 04:13:03 Set A/D encoding result=40 04:13:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:03 Set channel filter=0.000000e+000 result=40 04:13:03 Config A/D Result=40 04:13:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:03 Get A/D filter: -9.255963e+061 result=40 04:13:03 Get A/D value=-858993460 result=40 04:13:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:03 Aux= 04:13:03 Message to Camera, serial 264657 queued 04:13:39 Received message from Master: op=PointingHead serial=264670 04:13:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:13:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:13:40 Point started: ret=0 04:13:40 point_skyscan result=0 04:13:41 Check angles 04:13:41 SkyScan query 04:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:13:41 Message to Master queued w/err=0: serial=264670 error=0 04:13:46 Received message from Master: op=Filter serial=264671 04:13:46 Color wheel filter change from 0 to 0 04:13:46 FLIGetFilterPos err=0 currentPosition=0 04:13:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:46 Filter is already there-color wheel unchanged 04:13:46 Received message from Master: op=Shutter serial=264672 04:13:46 Shutter LASER close 04:13:46 Received message from Camera: op=State serial=264674 04:13:46 GetSingleValue result=40 Value=cccccccc 04:13:46 SkyScan query 04:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:13:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:47 Parameters OK 04:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:47 Set A/D data flow result=40 04:13:47 Set A/D channel type result=40 04:13:47 Set A/D encoding result=40 04:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:47 Set channel filter=0.000000e+000 result=40 04:13:47 Config A/D Result=40 04:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:47 Get A/D filter: -9.255963e+061 result=40 04:13:47 Get A/D value=-858993460 result=40 04:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:47 Parameters OK 04:13:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:47 Set A/D data flow result=40 04:13:47 Set A/D channel type result=40 04:13:47 Set A/D encoding result=40 04:13:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:47 Set channel filter=0.000000e+000 result=40 04:13:47 Config A/D Result=40 04:13:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:47 Get A/D filter: -9.255963e+061 result=40 04:13:47 Get A/D value=-858993460 result=40 04:13:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:47 Aux= 04:13:47 Message to Camera, serial 264674 queued [UTC 2019-3-14 04:14:24] 04:14:24 Received message from Master: op=PointingHead serial=264687 04:14:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:14:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:14:24 Point started: ret=0 04:14:24 point_skyscan result=0 04:14:25 Check angles 04:14:25 SkyScan query 04:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:14:25 Message to Master queued w/err=0: serial=264687 error=0 04:14:30 Received message from Master: op=Filter serial=264688 04:14:30 Color wheel filter change from 0 to 0 04:14:30 FLIGetFilterPos err=0 currentPosition=0 04:14:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:30 Filter is already there-color wheel unchanged 04:14:31 Received message from Master: op=Shutter serial=264689 04:14:31 Shutter LASER close 04:14:31 Received message from Camera: op=State serial=264691 04:14:31 GetSingleValue result=40 Value=cccccccc 04:14:31 SkyScan query 04:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:31 Parameters OK 04:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:31 Set A/D data flow result=40 04:14:31 Set A/D channel type result=40 04:14:31 Set A/D encoding result=40 04:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:31 Set channel filter=0.000000e+000 result=40 04:14:31 Config A/D Result=40 04:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:31 Get A/D filter: -9.255963e+061 result=40 04:14:31 Get A/D value=-858993460 result=40 04:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:31 Parameters OK 04:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:31 Set A/D data flow result=40 04:14:31 Set A/D channel type result=40 04:14:31 Set A/D encoding result=40 04:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:31 Set channel filter=0.000000e+000 result=40 04:14:31 Config A/D Result=40 04:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:31 Get A/D filter: -9.255963e+061 result=40 04:14:31 Get A/D value=-858993460 result=40 04:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:31 Aux= 04:14:31 Message to Camera, serial 264691 queued 04:15:08 Received message from Master: op=PointingHead serial=264704 04:15:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:15:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:15:08 Point started: ret=0 04:15:08 point_skyscan result=0 04:15:09 Check angles 04:15:09 SkyScan query 04:15:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 04:15:10 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 04:15:10 Check angles 04:15:10 SkyScan query 04:15:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 04:15:11 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 04:15:11 Check angles 04:15:11 SkyScan query 04:15:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.045<-16403 Statuses=0008 0009 04:15:11 Msec=1500 True Az=112.995 Ze=-66.045 Az status=0008 Ze status=0009 04:15:11 Check angles 04:15:11 SkyScan query 04:15:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 04:15:12 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 04:15:12 Check angles 04:15:12 SkyScan query 04:15:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.94<-19196 Statuses=0008 0009 04:15:13 Msec=3000 True Az=112.995 Ze=-107.94 Az status=0008 Ze status=0009 04:15:13 Check angles 04:15:13 SkyScan query 04:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 04:15:14 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 04:15:14 Check angles 04:15:14 SkyScan query 04:15:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 04:15:14 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 04:15:14 Check angles 04:15:14 SkyScan query 04:15:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 04:15:15 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 04:15:15 Check angles 04:15:15 SkyScan query 04:15:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:15:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:15:16 Message to Master queued w/err=0: serial=264704 error=0 04:15:21 Received message from Master: op=Filter serial=264705 04:15:21 Color wheel filter change from 0 to 0 04:15:21 FLIGetFilterPos err=0 currentPosition=0 04:15:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:21 Filter is already there-color wheel unchanged 04:15:21 Received message from Master: op=Shutter serial=264706 04:15:21 Shutter LASER open 04:15:21 Received message from Camera: op=State serial=264708 04:15:21 GetSingleValue result=40 Value=cccccccc 04:15:21 SkyScan query 04:15:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:22 Parameters OK 04:15:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:22 Set A/D data flow result=40 04:15:22 Set A/D channel type result=40 04:15:22 Set A/D encoding result=40 04:15:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:22 Set channel filter=0.000000e+000 result=40 04:15:22 Config A/D Result=40 04:15:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:22 Get A/D filter: -9.255963e+061 result=40 04:15:22 Get A/D value=-858993460 result=40 04:15:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:22 Parameters OK 04:15:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:22 Set A/D data flow result=40 04:15:22 Set A/D channel type result=40 04:15:22 Set A/D encoding result=40 04:15:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:22 Set channel filter=0.000000e+000 result=40 04:15:22 Config A/D Result=40 04:15:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:22 Get A/D filter: -9.255963e+061 result=40 04:15:22 Get A/D value=-858993460 result=40 04:15:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:22 Aux= 04:15:22 Message to Camera, serial 264708 queued 04:15:30 Received message from Master: op=Shutter serial=264718 04:15:30 Shutter LASER close 04:15:31 Received message from Master: op=PointingHead serial=264722 04:15:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:15:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:15:31 Point started: ret=0 04:15:31 point_skyscan result=0 04:15:32 Check angles 04:15:32 SkyScan query 04:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 04:15:32 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 04:15:33 Check angles 04:15:33 SkyScan query 04:15:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 04:15:33 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 04:15:33 Check angles 04:15:33 SkyScan query 04:15:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 04:15:34 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 04:15:34 Check angles 04:15:34 SkyScan query 04:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 04:15:35 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 04:15:35 Check angles 04:15:35 SkyScan query 04:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 04:15:35 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 04:15:36 Check angles 04:15:36 SkyScan query 04:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 04:15:36 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 04:15:36 Check angles 04:15:36 SkyScan query 04:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 04:15:37 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 04:15:37 Check angles 04:15:37 SkyScan query 04:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.605<-11693 Statuses=0008 0009 04:15:38 Msec=5250 True Az=112.995 Ze=4.605 Az status=0008 Ze status=0009 04:15:38 Check angles 04:15:38 SkyScan query 04:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:15:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:15:38 Message to Master queued w/err=0: serial=264722 error=0 04:15:43 Received message from Master: op=Filter serial=264723 04:15:43 Color wheel filter change from 0 to 0 04:15:43 FLIGetFilterPos err=0 currentPosition=0 04:15:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:43 Filter is already there-color wheel unchanged 04:15:44 Received message from Master: op=Shutter serial=264724 04:15:44 Shutter LASER close 04:15:44 Received message from Camera: op=State serial=264726 04:15:44 GetSingleValue result=40 Value=cccccccc 04:15:44 SkyScan query 04:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:15:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:44 Parameters OK 04:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:44 Set A/D data flow result=40 04:15:44 Set A/D channel type result=40 04:15:44 Set A/D encoding result=40 04:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:44 Set channel filter=0.000000e+000 result=40 04:15:44 Config A/D Result=40 04:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:44 Get A/D filter: -9.255963e+061 result=40 04:15:44 Get A/D value=-858993460 result=40 04:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:44 Parameters OK 04:15:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:44 Set A/D data flow result=40 04:15:44 Set A/D channel type result=40 04:15:44 Set A/D encoding result=40 04:15:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:44 Set channel filter=0.000000e+000 result=40 04:15:44 Config A/D Result=40 04:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:44 Get A/D filter: -9.255963e+061 result=40 04:15:44 Get A/D value=-858993460 result=40 04:15:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:44 Aux= 04:15:44 Message to Camera, serial 264726 queued 04:16:21 Received message from Master: op=PointingHead serial=264739 04:16:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:16:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:16:22 Point started: ret=0 04:16:22 point_skyscan result=0 04:16:22 Check angles 04:16:22 SkyScan query 04:16:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:16:23 Message to Master queued w/err=0: serial=264739 error=0 04:16:28 Received message from Master: op=Filter serial=264740 04:16:28 Color wheel filter change from 0 to 0 04:16:28 FLIGetFilterPos err=0 currentPosition=0 04:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:28 Filter is already there-color wheel unchanged 04:16:28 Received message from Master: op=Shutter serial=264741 04:16:28 Shutter LASER close 04:16:28 Received message from Camera: op=State serial=264743 04:16:28 GetSingleValue result=40 Value=cccccccc 04:16:28 SkyScan query 04:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:29 Parameters OK 04:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:29 Set A/D data flow result=40 04:16:29 Set A/D channel type result=40 04:16:29 Set A/D encoding result=40 04:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:29 Set channel filter=0.000000e+000 result=40 04:16:29 Config A/D Result=40 04:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:29 Get A/D filter: -9.255963e+061 result=40 04:16:29 Get A/D value=-858993460 result=40 04:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:29 Parameters OK 04:16:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:29 Set A/D data flow result=40 04:16:29 Set A/D channel type result=40 04:16:29 Set A/D encoding result=40 04:16:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:29 Set channel filter=0.000000e+000 result=40 04:16:29 Config A/D Result=40 04:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:29 Get A/D filter: -9.255963e+061 result=40 04:16:29 Get A/D value=-858993460 result=40 04:16:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:29 Aux= 04:16:29 Message to Camera, serial 264743 queued 04:17:06 Received message from Master: op=PointingHead serial=264756 04:17:06 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:17:06 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:17:06 Point started: ret=0 04:17:06 point_skyscan result=0 04:17:07 Check angles 04:17:07 SkyScan query 04:17:07 SkyScan query done: ret=0 az=136.035<-9069 ze=-6.51<-12434 Statuses=0009 0008 04:17:07 Msec=0 True Az=136.035 Ze=-6.51 Az status=0009 Ze status=0008 04:17:07 Check angles 04:17:07 SkyScan query 04:17:08 SkyScan query done: ret=0 az=153.855<-10257 ze=-6.495<-12433 Statuses=0009 0008 04:17:08 Msec=750 True Az=153.855 Ze=-6.495 Az status=0009 Ze status=0008 04:17:08 Check angles 04:17:08 SkyScan query 04:17:09 SkyScan query done: ret=0 az=171.42<-11428 ze=-6.495<-12433 Statuses=0009 0008 04:17:09 Msec=1500 True Az=171.42 Ze=-6.495 Az status=0009 Ze status=0008 04:17:09 Check angles 04:17:09 SkyScan query 04:17:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 04:17:09 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 04:17:09 Message to Master queued w/err=0: serial=264756 error=0 04:17:14 Received message from Master: op=Filter serial=264757 04:17:14 Color wheel filter change from 0 to 0 04:17:14 FLIGetFilterPos err=0 currentPosition=0 04:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:14 Filter is already there-color wheel unchanged 04:17:15 Received message from Master: op=Shutter serial=264758 04:17:15 Shutter LASER close 04:17:15 Received message from Camera: op=State serial=264760 04:17:15 GetSingleValue result=40 Value=cccccccc 04:17:15 SkyScan query 04:17:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:15 Parameters OK 04:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:15 Set A/D data flow result=40 04:17:15 Set A/D channel type result=40 04:17:15 Set A/D encoding result=40 04:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:15 Set channel filter=0.000000e+000 result=40 04:17:15 Config A/D Result=40 04:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:15 Get A/D filter: -9.255963e+061 result=40 04:17:15 Get A/D value=-858993460 result=40 04:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:15 Parameters OK 04:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:15 Set A/D data flow result=40 04:17:15 Set A/D channel type result=40 04:17:15 Set A/D encoding result=40 04:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:15 Set channel filter=0.000000e+000 result=40 04:17:15 Config A/D Result=40 04:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:15 Get A/D filter: -9.255963e+061 result=40 04:17:15 Get A/D value=-858993460 result=40 04:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:15 Aux= 04:17:15 Message to Camera, serial 264760 queued 04:17:51 Received message from Master: op=PointingHead serial=264772 04:17:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:17:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:17:52 Point started: ret=0 04:17:52 point_skyscan result=0 04:17:52 Check angles 04:17:52 SkyScan query 04:17:53 SkyScan query done: ret=0 az=153.15<-10210 ze=6.51<-11566 Statuses=0009 0008 04:17:53 Msec=0 True Az=153.15 Ze=6.51 Az status=0009 Ze status=0008 04:17:53 Check angles 04:17:53 SkyScan query 04:17:54 SkyScan query done: ret=0 az=135.72<-9048 ze=6.495<-11567 Statuses=0009 0008 04:17:54 Msec=750 True Az=135.72 Ze=6.495 Az status=0009 Ze status=0008 04:17:54 Check angles 04:17:54 SkyScan query 04:17:54 SkyScan query done: ret=0 az=118.245<-7883 ze=6.495<-11567 Statuses=0009 0008 04:17:54 Msec=1500 True Az=118.245 Ze=6.495 Az status=0009 Ze status=0008 04:17:55 Check angles 04:17:55 SkyScan query 04:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:17:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:17:55 Message to Master queued w/err=0: serial=264772 error=0 04:18:00 Received message from Master: op=Filter serial=264773 04:18:00 Color wheel filter change from 0 to 0 04:18:00 FLIGetFilterPos err=0 currentPosition=0 04:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:00 Filter is already there-color wheel unchanged 04:18:00 Received message from Master: op=Shutter serial=264774 04:18:00 Shutter LASER close 04:18:00 Received message from Camera: op=State serial=264776 04:18:00 GetSingleValue result=40 Value=cccccccc 04:18:00 SkyScan query 04:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:01 Parameters OK 04:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:01 Set A/D data flow result=40 04:18:01 Set A/D channel type result=40 04:18:01 Set A/D encoding result=40 04:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:01 Set channel filter=0.000000e+000 result=40 04:18:01 Config A/D Result=40 04:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:01 Get A/D filter: -9.255963e+061 result=40 04:18:01 Get A/D value=-858993460 result=40 04:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:01 Parameters OK 04:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:01 Set A/D data flow result=40 04:18:01 Set A/D channel type result=40 04:18:01 Set A/D encoding result=40 04:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:01 Set channel filter=0.000000e+000 result=40 04:18:01 Config A/D Result=40 04:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:01 Get A/D filter: -9.255963e+061 result=40 04:18:01 Get A/D value=-858993460 result=40 04:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:01 Aux= 04:18:01 Message to Camera, serial 264776 queued 04:18:38 Received message from Master: op=PointingHead serial=264789 04:18:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:18:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:18:38 Point started: ret=0 04:18:38 point_skyscan result=0 04:18:39 Check angles 04:18:39 SkyScan query 04:18:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 04:18:39 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 04:18:40 Check angles 04:18:40 SkyScan query 04:18:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 04:18:40 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 04:18:40 Check angles 04:18:40 SkyScan query 04:18:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 04:18:41 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 04:18:41 Check angles 04:18:41 SkyScan query 04:18:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 04:18:42 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 04:18:42 Check angles 04:18:42 SkyScan query 04:18:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 04:18:42 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 04:18:43 Check angles 04:18:43 SkyScan query 04:18:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 04:18:43 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 04:18:43 Check angles 04:18:43 SkyScan query 04:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 04:18:44 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 04:18:44 Check angles 04:18:44 SkyScan query 04:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 04:18:45 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 04:18:45 Check angles 04:18:45 SkyScan query 04:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:18:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:18:45 Message to Master queued w/err=0: serial=264789 error=0 04:18:50 Received message from Master: op=Filter serial=264790 04:18:50 Color wheel filter change from 0 to 0 04:18:50 FLIGetFilterPos err=0 currentPosition=0 04:18:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:50 Filter is already there-color wheel unchanged 04:18:51 Received message from Master: op=Shutter serial=264791 04:18:51 Shutter LASER open 04:18:51 Received message from Camera: op=State serial=264793 04:18:51 GetSingleValue result=40 Value=cccccccc 04:18:51 SkyScan query 04:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:51 Parameters OK 04:18:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:51 Set A/D data flow result=40 04:18:51 Set A/D channel type result=40 04:18:51 Set A/D encoding result=40 04:18:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:51 Set channel filter=0.000000e+000 result=40 04:18:51 Config A/D Result=40 04:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:51 Get A/D filter: -9.255963e+061 result=40 04:18:51 Get A/D value=-858993460 result=40 04:18:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:51 Parameters OK 04:18:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:51 Set A/D data flow result=40 04:18:51 Set A/D channel type result=40 04:18:51 Set A/D encoding result=40 04:18:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:51 Set channel filter=0.000000e+000 result=40 04:18:51 Config A/D Result=40 04:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:51 Get A/D filter: -9.255963e+061 result=40 04:18:51 Get A/D value=-858993460 result=40 04:18:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:51 Aux= 04:18:51 Message to Camera, serial 264793 queued 04:19:00 Received message from Master: op=Shutter serial=264803 04:19:00 Shutter LASER close 04:19:00 Received message from Master: op=PointingHead serial=264807 04:19:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:01 Point started: ret=0 04:19:01 point_skyscan result=0 04:19:01 Check angles 04:19:01 SkyScan query 04:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 04:19:02 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 04:19:02 Check angles 04:19:02 SkyScan query 04:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 04:19:03 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 04:19:03 Check angles 04:19:03 SkyScan query 04:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 04:19:03 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 04:19:04 Check angles 04:19:04 SkyScan query 04:19:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 04:19:04 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 04:19:04 Check angles 04:19:04 SkyScan query 04:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 04:19:05 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 04:19:05 Check angles 04:19:05 SkyScan query 04:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 04:19:06 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 04:19:06 Check angles 04:19:06 SkyScan query 04:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 04:19:06 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 04:19:07 Check angles 04:19:07 SkyScan query 04:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 04:19:07 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 04:19:07 Check angles 04:19:07 SkyScan query 04:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:19:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:19:08 Message to Master queued w/err=0: serial=264807 error=0 04:19:13 Received message from Master: op=Filter serial=264808 04:19:13 Color wheel filter change from 0 to 0 04:19:13 FLIGetFilterPos err=0 currentPosition=0 04:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:13 Filter is already there-color wheel unchanged 04:19:13 Received message from Master: op=Shutter serial=264809 04:19:13 Shutter LASER close 04:19:13 Received message from Camera: op=State serial=264811 04:19:13 GetSingleValue result=40 Value=cccccccc 04:19:13 SkyScan query 04:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:14 Parameters OK 04:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:14 Set A/D data flow result=40 04:19:14 Set A/D channel type result=40 04:19:14 Set A/D encoding result=40 04:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:14 Set channel filter=0.000000e+000 result=40 04:19:14 Config A/D Result=40 04:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:14 Get A/D filter: -9.255963e+061 result=40 04:19:14 Get A/D value=-858993460 result=40 04:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:14 Parameters OK 04:19:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:14 Set A/D data flow result=40 04:19:14 Set A/D channel type result=40 04:19:14 Set A/D encoding result=40 04:19:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:14 Set channel filter=0.000000e+000 result=40 04:19:14 Config A/D Result=40 04:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:14 Get A/D filter: -9.255963e+061 result=40 04:19:14 Get A/D value=-858993460 result=40 04:19:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:14 Aux= 04:19:14 Message to Camera, serial 264811 queued 04:19:51 Received message from Master: op=PointingHead serial=264824 04:19:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:19:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:19:51 Point started: ret=0 04:19:51 point_skyscan result=0 04:19:52 Check angles 04:19:52 SkyScan query 04:19:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:19:52 Message to Master queued w/err=0: serial=264824 error=0 04:19:57 Received message from Master: op=Filter serial=264825 04:19:57 Color wheel filter change from 0 to 0 04:19:57 FLIGetFilterPos err=0 currentPosition=0 04:19:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:57 Filter is already there-color wheel unchanged 04:19:58 Received message from Master: op=Shutter serial=264826 04:19:58 Shutter LASER close 04:19:58 Received message from Camera: op=State serial=264828 04:19:58 GetSingleValue result=40 Value=cccccccc 04:19:58 SkyScan query 04:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:19:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:58 Parameters OK 04:19:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:58 Set A/D data flow result=40 04:19:58 Set A/D channel type result=40 04:19:58 Set A/D encoding result=40 04:19:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:58 Set channel filter=0.000000e+000 result=40 04:19:58 Config A/D Result=40 04:19:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:58 Get A/D filter: -9.255963e+061 result=40 04:19:58 Get A/D value=-858993460 result=40 04:19:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:58 Parameters OK 04:19:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:58 Set A/D data flow result=40 04:19:58 Set A/D channel type result=40 04:19:58 Set A/D encoding result=40 04:19:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:58 Set channel filter=0.000000e+000 result=40 04:19:58 Config A/D Result=40 04:19:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:58 Get A/D filter: -9.255963e+061 result=40 04:19:58 Get A/D value=-858993460 result=40 04:19:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:58 Aux= 04:19:58 Message to Camera, serial 264828 queued 04:20:35 Received message from Master: op=PointingHead serial=264841 04:20:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:20:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:20:35 Point started: ret=0 04:20:35 point_skyscan result=0 04:20:36 Check angles 04:20:36 SkyScan query 04:20:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:20:37 Message to Master queued w/err=0: serial=264841 error=0 04:20:42 Received message from Master: op=Filter serial=264842 04:20:42 Color wheel filter change from 0 to 0 04:20:42 FLIGetFilterPos err=0 currentPosition=0 04:20:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:42 Filter is already there-color wheel unchanged 04:20:42 Received message from Master: op=Shutter serial=264843 04:20:42 Shutter LASER close 04:20:42 Received message from Camera: op=State serial=264845 04:20:42 GetSingleValue result=40 Value=cccccccc 04:20:42 SkyScan query 04:20:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:20:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:43 Parameters OK 04:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:43 Set A/D data flow result=40 04:20:43 Set A/D channel type result=40 04:20:43 Set A/D encoding result=40 04:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:43 Set channel filter=0.000000e+000 result=40 04:20:43 Config A/D Result=40 04:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:43 Get A/D filter: -9.255963e+061 result=40 04:20:43 Get A/D value=-858993460 result=40 04:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:43 Parameters OK 04:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:43 Set A/D data flow result=40 04:20:43 Set A/D channel type result=40 04:20:43 Set A/D encoding result=40 04:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:43 Set channel filter=0.000000e+000 result=40 04:20:43 Config A/D Result=40 04:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:43 Get A/D filter: -9.255963e+061 result=40 04:20:43 Get A/D value=-858993460 result=40 04:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:43 Aux= 04:20:43 Message to Camera, serial 264845 queued 04:21:19 Received message from Master: op=PointingHead serial=264858 04:21:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:21:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:21:20 Point started: ret=0 04:21:20 point_skyscan result=0 04:21:20 Check angles 04:21:20 SkyScan query 04:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:21:21 Message to Master queued w/err=0: serial=264858 error=0 04:21:26 Received message from Master: op=Filter serial=264859 04:21:26 Color wheel filter change from 0 to 0 04:21:26 FLIGetFilterPos err=0 currentPosition=0 04:21:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:26 Filter is already there-color wheel unchanged 04:21:26 Received message from Master: op=Shutter serial=264860 04:21:26 Shutter LASER close 04:21:26 Received message from Camera: op=State serial=264862 04:21:26 GetSingleValue result=40 Value=cccccccc 04:21:26 SkyScan query 04:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:21:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:27 Parameters OK 04:21:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:27 Set A/D data flow result=40 04:21:27 Set A/D channel type result=40 04:21:27 Set A/D encoding result=40 04:21:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:27 Set channel filter=0.000000e+000 result=40 04:21:27 Config A/D Result=40 04:21:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:27 Get A/D filter: -9.255963e+061 result=40 04:21:27 Get A/D value=-858993460 result=40 04:21:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:27 Parameters OK 04:21:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:27 Set A/D data flow result=40 04:21:27 Set A/D channel type result=40 04:21:27 Set A/D encoding result=40 04:21:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:27 Set channel filter=0.000000e+000 result=40 04:21:27 Config A/D Result=40 04:21:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:27 Get A/D filter: -9.255963e+061 result=40 04:21:27 Get A/D value=-858993460 result=40 04:21:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:27 Aux= 04:21:27 Message to Camera, serial 264862 queued 04:22:04 Received message from Master: op=PointingHead serial=264875 04:22:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:22:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:22:04 Point started: ret=0 04:22:04 point_skyscan result=0 04:22:05 Check angles 04:22:05 SkyScan query 04:22:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 04:22:05 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 04:22:06 Check angles 04:22:06 SkyScan query 04:22:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 04:22:06 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 04:22:06 Check angles 04:22:06 SkyScan query 04:22:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 04:22:07 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 04:22:07 Check angles 04:22:07 SkyScan query 04:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.64<-17776 Statuses=0008 0009 04:22:08 Msec=2250 True Az=112.995 Ze=-86.64 Az status=0008 Ze status=0009 04:22:08 Check angles 04:22:08 SkyScan query 04:22:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.045<-19203 Statuses=0008 0009 04:22:08 Msec=3000 True Az=112.995 Ze=-108.045 Az status=0008 Ze status=0009 04:22:09 Check angles 04:22:09 SkyScan query 04:22:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 04:22:09 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 04:22:09 Check angles 04:22:09 SkyScan query 04:22:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 04:22:10 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 04:22:10 Check angles 04:22:10 SkyScan query 04:22:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 04:22:11 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 04:22:11 Check angles 04:22:11 SkyScan query 04:22:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:22:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:22:11 Message to Master queued w/err=0: serial=264875 error=0 04:22:16 Received message from Master: op=Filter serial=264876 04:22:16 Color wheel filter change from 0 to 0 04:22:16 FLIGetFilterPos err=0 currentPosition=0 04:22:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:16 Filter is already there-color wheel unchanged 04:22:17 Received message from Master: op=Shutter serial=264877 04:22:17 Shutter LASER open 04:22:17 Received message from Camera: op=State serial=264879 04:22:17 GetSingleValue result=40 Value=cccccccc 04:22:17 SkyScan query 04:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:22:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:17 Parameters OK 04:22:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:17 Set A/D data flow result=40 04:22:17 Set A/D channel type result=40 04:22:17 Set A/D encoding result=40 04:22:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:17 Set channel filter=0.000000e+000 result=40 04:22:17 Config A/D Result=40 04:22:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:17 Get A/D filter: -9.255963e+061 result=40 04:22:17 Get A/D value=-858993460 result=40 04:22:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:17 Parameters OK 04:22:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:17 Set A/D data flow result=40 04:22:17 Set A/D channel type result=40 04:22:17 Set A/D encoding result=40 04:22:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:17 Set channel filter=0.000000e+000 result=40 04:22:17 Config A/D Result=40 04:22:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:17 Get A/D filter: -9.255963e+061 result=40 04:22:17 Get A/D value=-858993460 result=40 04:22:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:17 Aux= 04:22:17 Message to Camera, serial 264879 queued 04:22:25 Received message from Master: op=Shutter serial=264888 04:22:25 Shutter LASER close 04:22:25 Received message from Master: op=PointingHead serial=264892 04:22:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:22:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:22:26 Point started: ret=0 04:22:26 point_skyscan result=0 04:22:27 Check angles 04:22:27 SkyScan query 04:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 04:22:27 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 04:22:27 Check angles 04:22:27 SkyScan query 04:22:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 04:22:28 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 04:22:28 Check angles 04:22:28 SkyScan query 04:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 04:22:29 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 04:22:29 Check angles 04:22:29 SkyScan query 04:22:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 04:22:29 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 04:22:30 Check angles 04:22:30 SkyScan query 04:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 04:22:30 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 04:22:30 Check angles 04:22:30 SkyScan query 04:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 04:22:31 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 04:22:31 Check angles 04:22:31 SkyScan query 04:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.365<-13091 Statuses=0008 0009 04:22:32 Msec=4500 True Az=112.995 Ze=-16.365 Az status=0008 Ze status=0009 04:22:32 Check angles 04:22:32 SkyScan query 04:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 04:22:32 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 04:22:33 Check angles 04:22:33 SkyScan query 04:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:22:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:22:33 Message to Master queued w/err=0: serial=264892 error=0 04:22:38 Received message from Master: op=Filter serial=264893 04:22:38 Color wheel filter change from 0 to 0 04:22:38 FLIGetFilterPos err=0 currentPosition=0 04:22:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:38 Filter is already there-color wheel unchanged 04:22:38 Received message from Master: op=Shutter serial=264894 04:22:38 Shutter LASER close 04:22:39 Received message from Camera: op=State serial=264896 04:22:39 GetSingleValue result=40 Value=cccccccc 04:22:39 SkyScan query 04:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:22:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:39 Parameters OK 04:22:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:39 Set A/D data flow result=40 04:22:39 Set A/D channel type result=40 04:22:39 Set A/D encoding result=40 04:22:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:39 Set channel filter=0.000000e+000 result=40 04:22:39 Config A/D Result=40 04:22:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:39 Get A/D filter: -9.255963e+061 result=40 04:22:39 Get A/D value=-858993460 result=40 04:22:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:39 Parameters OK 04:22:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:39 Set A/D data flow result=40 04:22:39 Set A/D channel type result=40 04:22:39 Set A/D encoding result=40 04:22:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:39 Set channel filter=0.000000e+000 result=40 04:22:39 Config A/D Result=40 04:22:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:39 Get A/D filter: -9.255963e+061 result=40 04:22:39 Get A/D value=-858993460 result=40 04:22:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:39 Aux= 04:22:39 Message to Camera, serial 264896 queued 04:23:15 Received message from Master: op=PointingHead serial=264908 04:23:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:23:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:23:15 Point started: ret=0 04:23:15 point_skyscan result=0 04:23:16 Check angles 04:23:16 SkyScan query 04:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:23:17 Message to Master queued w/err=0: serial=264908 error=0 04:23:22 Received message from Master: op=Filter serial=264909 04:23:22 Color wheel filter change from 0 to 0 04:23:22 FLIGetFilterPos err=0 currentPosition=0 04:23:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:22 Filter is already there-color wheel unchanged 04:23:22 Received message from Master: op=Shutter serial=264910 04:23:22 Shutter LASER close 04:23:22 Received message from Camera: op=State serial=264912 04:23:22 GetSingleValue result=40 Value=cccccccc 04:23:22 SkyScan query 04:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:22 Parameters OK 04:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:22 Set A/D data flow result=40 04:23:22 Set A/D channel type result=40 04:23:22 Set A/D encoding result=40 04:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:22 Set channel filter=0.000000e+000 result=40 04:23:22 Config A/D Result=40 04:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:22 Get A/D filter: -9.255963e+061 result=40 04:23:22 Get A/D value=-858993460 result=40 04:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:22 Parameters OK 04:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:22 Set A/D data flow result=40 04:23:22 Set A/D channel type result=40 04:23:22 Set A/D encoding result=40 04:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:22 Set channel filter=0.000000e+000 result=40 04:23:22 Config A/D Result=40 04:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:22 Get A/D filter: -9.255963e+061 result=40 04:23:22 Get A/D value=-858993460 result=40 04:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:22 Aux= 04:23:22 Message to Camera, serial 264912 queued [UTC 2019-3-14 04:23:48] 04:23:59 Received message from Master: op=PointingHead serial=264925 04:23:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:23:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:24:00 Point started: ret=0 04:24:00 point_skyscan result=0 04:24:00 Check angles 04:24:00 SkyScan query 04:24:01 SkyScan query done: ret=0 az=136.485<-9099 ze=-6.51<-12434 Statuses=0009 0008 04:24:01 Msec=0 True Az=136.485 Ze=-6.51 Az status=0009 Ze status=0008 04:24:01 Check angles 04:24:01 SkyScan query 04:24:02 SkyScan query done: ret=0 az=154.35<-10290 ze=-6.495<-12433 Statuses=0009 0008 04:24:02 Msec=750 True Az=154.35 Ze=-6.495 Az status=0009 Ze status=0008 04:24:02 Check angles 04:24:02 SkyScan query 04:24:02 SkyScan query done: ret=0 az=171.72<-11448 ze=-6.495<-12433 Statuses=0009 0008 04:24:02 Msec=1500 True Az=171.72 Ze=-6.495 Az status=0009 Ze status=0008 04:24:03 Check angles 04:24:03 SkyScan query 04:24:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:24:03 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:24:03 Message to Master queued w/err=0: serial=264925 error=0 04:24:08 Received message from Master: op=Filter serial=264926 04:24:08 Color wheel filter change from 0 to 0 04:24:08 FLIGetFilterPos err=0 currentPosition=0 04:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:08 Filter is already there-color wheel unchanged 04:24:08 Received message from Master: op=Shutter serial=264927 04:24:08 Shutter LASER close 04:24:08 Received message from Camera: op=State serial=264929 04:24:08 GetSingleValue result=40 Value=cccccccc 04:24:08 SkyScan query 04:24:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:09 Parameters OK 04:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:09 Set A/D data flow result=40 04:24:09 Set A/D channel type result=40 04:24:09 Set A/D encoding result=40 04:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:09 Set channel filter=0.000000e+000 result=40 04:24:09 Config A/D Result=40 04:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:09 Get A/D filter: -9.255963e+061 result=40 04:24:09 Get A/D value=-858993460 result=40 04:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:09 Parameters OK 04:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:09 Set A/D data flow result=40 04:24:09 Set A/D channel type result=40 04:24:09 Set A/D encoding result=40 04:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:09 Set channel filter=0.000000e+000 result=40 04:24:09 Config A/D Result=40 04:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:09 Get A/D filter: -9.255963e+061 result=40 04:24:09 Get A/D value=-858993460 result=40 04:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:09 Aux= 04:24:09 Message to Camera, serial 264929 queued 04:24:46 Received message from Master: op=PointingHead serial=264942 04:24:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:24:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:24:46 Point started: ret=0 04:24:46 point_skyscan result=0 04:24:47 Check angles 04:24:47 SkyScan query 04:24:48 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 04:24:48 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 04:24:48 Check angles 04:24:48 SkyScan query 04:24:48 SkyScan query done: ret=0 az=135.27<-9018 ze=6.495<-11567 Statuses=0009 0008 04:24:48 Msec=750 True Az=135.27 Ze=6.495 Az status=0009 Ze status=0008 04:24:48 Check angles 04:24:48 SkyScan query 04:24:49 SkyScan query done: ret=0 az=117.42<-7828 ze=6.495<-11567 Statuses=0009 0008 04:24:49 Msec=1500 True Az=117.42 Ze=6.495 Az status=0009 Ze status=0008 04:24:49 Check angles 04:24:49 SkyScan query 04:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:24:50 Message to Master queued w/err=0: serial=264942 error=0 04:24:55 Received message from Master: op=Filter serial=264943 04:24:55 Color wheel filter change from 0 to 0 04:24:55 FLIGetFilterPos err=0 currentPosition=0 04:24:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:55 Filter is already there-color wheel unchanged 04:24:55 Received message from Master: op=Shutter serial=264944 04:24:55 Shutter LASER close 04:24:55 Received message from Camera: op=State serial=264946 04:24:55 GetSingleValue result=40 Value=cccccccc 04:24:55 SkyScan query 04:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:24:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:56 Parameters OK 04:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:56 Set A/D data flow result=40 04:24:56 Set A/D channel type result=40 04:24:56 Set A/D encoding result=40 04:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:56 Set channel filter=0.000000e+000 result=40 04:24:56 Config A/D Result=40 04:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:56 Get A/D filter: -9.255963e+061 result=40 04:24:56 Get A/D value=-858993460 result=40 04:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:56 Parameters OK 04:24:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:56 Set A/D data flow result=40 04:24:56 Set A/D channel type result=40 04:24:56 Set A/D encoding result=40 04:24:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:56 Set channel filter=0.000000e+000 result=40 04:24:56 Config A/D Result=40 04:24:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:56 Get A/D filter: -9.255963e+061 result=40 04:24:56 Get A/D value=-858993460 result=40 04:24:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:56 Aux= 04:24:56 Message to Camera, serial 264946 queued 04:25:32 Received message from Master: op=PointingHead serial=264959 04:25:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:25:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:25:33 Point started: ret=0 04:25:33 point_skyscan result=0 04:25:34 Check angles 04:25:34 SkyScan query 04:25:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 04:25:34 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 04:25:34 Check angles 04:25:34 SkyScan query 04:25:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 04:25:35 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 04:25:35 Check angles 04:25:35 SkyScan query 04:25:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 04:25:36 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 04:25:36 Check angles 04:25:36 SkyScan query 04:25:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 04:25:36 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 04:25:37 Check angles 04:25:37 SkyScan query 04:25:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 04:25:37 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 04:25:37 Check angles 04:25:37 SkyScan query 04:25:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 04:25:38 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 04:25:38 Check angles 04:25:38 SkyScan query 04:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 04:25:39 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 04:25:39 Check angles 04:25:39 SkyScan query 04:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 04:25:39 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 04:25:40 Check angles 04:25:40 SkyScan query 04:25:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:25:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:25:40 Message to Master queued w/err=0: serial=264959 error=0 04:25:45 Received message from Master: op=Filter serial=264960 04:25:45 Color wheel filter change from 0 to 0 04:25:45 FLIGetFilterPos err=0 currentPosition=0 04:25:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:45 Filter is already there-color wheel unchanged 04:25:45 Received message from Master: op=Shutter serial=264961 04:25:45 Shutter LASER open 04:25:45 Received message from Camera: op=State serial=264963 04:25:45 GetSingleValue result=40 Value=cccccccc 04:25:45 SkyScan query 04:25:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:46 Parameters OK 04:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:46 Set A/D data flow result=40 04:25:46 Set A/D channel type result=40 04:25:46 Set A/D encoding result=40 04:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:46 Set channel filter=0.000000e+000 result=40 04:25:46 Config A/D Result=40 04:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:46 Get A/D filter: -9.255963e+061 result=40 04:25:46 Get A/D value=-858993460 result=40 04:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:46 Parameters OK 04:25:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:46 Set A/D data flow result=40 04:25:46 Set A/D channel type result=40 04:25:46 Set A/D encoding result=40 04:25:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:46 Set channel filter=0.000000e+000 result=40 04:25:46 Config A/D Result=40 04:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:46 Get A/D filter: -9.255963e+061 result=40 04:25:46 Get A/D value=-858993460 result=40 04:25:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:46 Aux= 04:25:46 Message to Camera, serial 264963 queued 04:25:54 Received message from Master: op=Shutter serial=264973 04:25:54 Shutter LASER close 04:25:55 Received message from Master: op=PointingHead serial=264977 04:25:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:25:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:25:55 Point started: ret=0 04:25:55 point_skyscan result=0 04:25:56 Check angles 04:25:56 SkyScan query 04:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 04:25:57 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 04:25:57 Check angles 04:25:57 SkyScan query 04:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 04:25:57 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 04:25:58 Check angles 04:25:58 SkyScan query 04:25:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 04:25:58 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 04:25:58 Check angles 04:25:58 SkyScan query 04:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 04:25:59 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 04:25:59 Check angles 04:25:59 SkyScan query 04:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 04:26:00 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 04:26:00 Check angles 04:26:00 SkyScan query 04:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 04:26:00 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 04:26:01 Check angles 04:26:01 SkyScan query 04:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 04:26:01 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 04:26:01 Check angles 04:26:01 SkyScan query 04:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 04:26:02 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 04:26:02 Check angles 04:26:02 SkyScan query 04:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:26:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:26:03 Message to Master queued w/err=0: serial=264977 error=0 04:26:08 Received message from Master: op=Filter serial=264978 04:26:08 Color wheel filter change from 0 to 0 04:26:08 FLIGetFilterPos err=0 currentPosition=0 04:26:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:08 Filter is already there-color wheel unchanged 04:26:08 Received message from Master: op=Shutter serial=264979 04:26:08 Shutter LASER close 04:26:08 Received message from Camera: op=State serial=264981 04:26:08 GetSingleValue result=40 Value=cccccccc 04:26:08 SkyScan query 04:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:09 Parameters OK 04:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:09 Set A/D data flow result=40 04:26:09 Set A/D channel type result=40 04:26:09 Set A/D encoding result=40 04:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:09 Set channel filter=0.000000e+000 result=40 04:26:09 Config A/D Result=40 04:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:09 Get A/D filter: -9.255963e+061 result=40 04:26:09 Get A/D value=-858993460 result=40 04:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:09 Parameters OK 04:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:09 Set A/D data flow result=40 04:26:09 Set A/D channel type result=40 04:26:09 Set A/D encoding result=40 04:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:09 Set channel filter=0.000000e+000 result=40 04:26:09 Config A/D Result=40 04:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:09 Get A/D filter: -9.255963e+061 result=40 04:26:09 Get A/D value=-858993460 result=40 04:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:09 Aux= 04:26:09 Message to Camera, serial 264981 queued 04:26:45 Received message from Master: op=PointingHead serial=264994 04:26:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:26:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:26:46 Point started: ret=0 04:26:46 point_skyscan result=0 04:26:47 Check angles 04:26:47 SkyScan query 04:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:26:47 Message to Master queued w/err=0: serial=264994 error=0 04:26:52 Received message from Master: op=Filter serial=264995 04:26:52 Color wheel filter change from 0 to 0 04:26:52 FLIGetFilterPos err=0 currentPosition=0 04:26:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:52 Filter is already there-color wheel unchanged 04:26:52 Received message from Master: op=Shutter serial=264996 04:26:52 Shutter LASER close 04:26:52 Received message from Camera: op=State serial=264998 04:26:52 GetSingleValue result=40 Value=cccccccc 04:26:52 SkyScan query 04:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:26:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:53 Parameters OK 04:26:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:53 Set A/D data flow result=40 04:26:53 Set A/D channel type result=40 04:26:53 Set A/D encoding result=40 04:26:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:53 Set channel filter=0.000000e+000 result=40 04:26:53 Config A/D Result=40 04:26:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:53 Get A/D filter: -9.255963e+061 result=40 04:26:53 Get A/D value=-858993460 result=40 04:26:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:53 Parameters OK 04:26:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:53 Set A/D data flow result=40 04:26:53 Set A/D channel type result=40 04:26:53 Set A/D encoding result=40 04:26:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:53 Set channel filter=0.000000e+000 result=40 04:26:53 Config A/D Result=40 04:26:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:53 Get A/D filter: -9.255963e+061 result=40 04:26:53 Get A/D value=-858993460 result=40 04:26:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:53 Aux= 04:26:53 Message to Camera, serial 264998 queued 04:27:30 Received message from Master: op=PointingHead serial=265011 04:27:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:27:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:27:30 Point started: ret=0 04:27:30 point_skyscan result=0 04:27:31 Check angles 04:27:31 SkyScan query 04:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:27:31 Message to Master queued w/err=0: serial=265011 error=0 04:27:36 Received message from Master: op=Filter serial=265012 04:27:36 Color wheel filter change from 0 to 0 04:27:36 FLIGetFilterPos err=0 currentPosition=0 04:27:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:36 Filter is already there-color wheel unchanged 04:27:37 Received message from Master: op=Shutter serial=265013 04:27:37 Shutter LASER close 04:27:37 Received message from Camera: op=State serial=265015 04:27:37 GetSingleValue result=40 Value=cccccccc 04:27:37 SkyScan query 04:27:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:27:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:37 Parameters OK 04:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:37 Set A/D data flow result=40 04:27:37 Set A/D channel type result=40 04:27:37 Set A/D encoding result=40 04:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:37 Set channel filter=0.000000e+000 result=40 04:27:37 Config A/D Result=40 04:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:37 Get A/D filter: -9.255963e+061 result=40 04:27:37 Get A/D value=-858993460 result=40 04:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:37 Parameters OK 04:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:37 Set A/D data flow result=40 04:27:37 Set A/D channel type result=40 04:27:37 Set A/D encoding result=40 04:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:37 Set channel filter=0.000000e+000 result=40 04:27:37 Config A/D Result=40 04:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:37 Get A/D filter: -9.255963e+061 result=40 04:27:37 Get A/D value=-858993460 result=40 04:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:37 Aux= 04:27:37 Message to Camera, serial 265015 queued 04:28:14 Received message from Master: op=PointingHead serial=265028 04:28:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:28:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:28:14 Point started: ret=0 04:28:14 point_skyscan result=0 04:28:15 Check angles 04:28:15 SkyScan query 04:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:28:16 Message to Master queued w/err=0: serial=265028 error=0 04:28:21 Received message from Master: op=Filter serial=265029 04:28:21 Color wheel filter change from 0 to 0 04:28:21 FLIGetFilterPos err=0 currentPosition=0 04:28:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:21 Filter is already there-color wheel unchanged 04:28:21 Received message from Master: op=Shutter serial=265030 04:28:21 Shutter LASER close 04:28:21 Received message from Camera: op=State serial=265032 04:28:21 GetSingleValue result=40 Value=cccccccc 04:28:21 SkyScan query 04:28:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:28:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:22 Parameters OK 04:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:22 Set A/D data flow result=40 04:28:22 Set A/D channel type result=40 04:28:22 Set A/D encoding result=40 04:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:22 Set channel filter=0.000000e+000 result=40 04:28:22 Config A/D Result=40 04:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:22 Get A/D filter: -9.255963e+061 result=40 04:28:22 Get A/D value=-858993460 result=40 04:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:22 Parameters OK 04:28:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:22 Set A/D data flow result=40 04:28:22 Set A/D channel type result=40 04:28:22 Set A/D encoding result=40 04:28:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:22 Set channel filter=0.000000e+000 result=40 04:28:22 Config A/D Result=40 04:28:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:22 Get A/D filter: -9.255963e+061 result=40 04:28:22 Get A/D value=-858993460 result=40 04:28:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:22 Aux= 04:28:22 Message to Camera, serial 265032 queued 04:28:58 Received message from Master: op=PointingHead serial=265045 04:28:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:28:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:28:59 Point started: ret=0 04:28:59 point_skyscan result=0 04:28:59 Check angles 04:28:59 SkyScan query 04:29:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 04:29:00 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 04:29:00 Check angles 04:29:00 SkyScan query 04:29:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 04:29:01 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 04:29:01 Check angles 04:29:01 SkyScan query 04:29:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 04:29:02 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 04:29:02 Check angles 04:29:02 SkyScan query 04:29:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 04:29:02 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 04:29:02 Check angles 04:29:02 SkyScan query 04:29:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 04:29:03 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 04:29:03 Check angles 04:29:03 SkyScan query 04:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.49<-20566 Statuses=0008 0009 04:29:04 Msec=3750 True Az=112.995 Ze=-128.49 Az status=0008 Ze status=0009 04:29:04 Check angles 04:29:04 SkyScan query 04:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 04:29:05 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 04:29:05 Check angles 04:29:05 SkyScan query 04:29:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 04:29:05 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 04:29:05 Check angles 04:29:05 SkyScan query 04:29:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:29:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:29:06 Message to Master queued w/err=0: serial=265045 error=0 04:29:11 Received message from Master: op=Filter serial=265046 04:29:11 Color wheel filter change from 0 to 0 04:29:11 FLIGetFilterPos err=0 currentPosition=0 04:29:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:11 Filter is already there-color wheel unchanged 04:29:11 Received message from Master: op=Shutter serial=265047 04:29:11 Shutter LASER open 04:29:11 Received message from Camera: op=State serial=265049 04:29:11 GetSingleValue result=40 Value=cccccccc 04:29:11 SkyScan query 04:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:29:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:12 Parameters OK 04:29:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:12 Set A/D data flow result=40 04:29:12 Set A/D channel type result=40 04:29:12 Set A/D encoding result=40 04:29:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:12 Set channel filter=0.000000e+000 result=40 04:29:12 Config A/D Result=40 04:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:12 Get A/D filter: -9.255963e+061 result=40 04:29:12 Get A/D value=-858993460 result=40 04:29:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:12 Parameters OK 04:29:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:12 Set A/D data flow result=40 04:29:12 Set A/D channel type result=40 04:29:12 Set A/D encoding result=40 04:29:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:12 Set channel filter=0.000000e+000 result=40 04:29:12 Config A/D Result=40 04:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:12 Get A/D filter: -9.255963e+061 result=40 04:29:12 Get A/D value=-858993460 result=40 04:29:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:12 Aux= 04:29:12 Message to Camera, serial 265049 queued 04:29:20 Received message from Master: op=Shutter serial=265059 04:29:20 Shutter LASER close 04:29:21 Received message from Master: op=PointingHead serial=265063 04:29:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:29:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:29:21 Point started: ret=0 04:29:21 point_skyscan result=0 04:29:22 Check angles 04:29:22 SkyScan query 04:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 04:29:23 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 04:29:23 Check angles 04:29:23 SkyScan query 04:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.245<-20083 Statuses=0008 0009 04:29:23 Msec=750 True Az=112.995 Ze=-121.245 Az status=0008 Ze status=0009 04:29:24 Check angles 04:29:24 SkyScan query 04:29:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 04:29:24 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 04:29:24 Check angles 04:29:24 SkyScan query 04:29:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 04:29:25 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 04:29:25 Check angles 04:29:25 SkyScan query 04:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 04:29:26 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 04:29:26 Check angles 04:29:26 SkyScan query 04:29:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 04:29:26 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 04:29:27 Check angles 04:29:27 SkyScan query 04:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 04:29:27 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 04:29:27 Check angles 04:29:27 SkyScan query 04:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 04:29:28 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 04:29:28 Check angles 04:29:28 SkyScan query 04:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:29:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:29:29 Message to Master queued w/err=0: serial=265063 error=0 04:29:34 Received message from Master: op=Filter serial=265064 04:29:34 Color wheel filter change from 0 to 0 04:29:34 FLIGetFilterPos err=0 currentPosition=0 04:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:34 Filter is already there-color wheel unchanged 04:29:34 Received message from Master: op=Shutter serial=265065 04:29:34 Shutter LASER close 04:29:34 Received message from Camera: op=State serial=265067 04:29:34 GetSingleValue result=40 Value=cccccccc 04:29:34 SkyScan query 04:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:35 Parameters OK 04:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:35 Set A/D data flow result=40 04:29:35 Set A/D channel type result=40 04:29:35 Set A/D encoding result=40 04:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:35 Set channel filter=0.000000e+000 result=40 04:29:35 Config A/D Result=40 04:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:35 Get A/D filter: -9.255963e+061 result=40 04:29:35 Get A/D value=-858993460 result=40 04:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:35 Parameters OK 04:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:35 Set A/D data flow result=40 04:29:35 Set A/D channel type result=40 04:29:35 Set A/D encoding result=40 04:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:35 Set channel filter=0.000000e+000 result=40 04:29:35 Config A/D Result=40 04:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:35 Get A/D filter: -9.255963e+061 result=40 04:29:35 Get A/D value=-858993460 result=40 04:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:35 Aux= 04:29:35 Message to Camera, serial 265067 queued 04:30:11 Received message from Master: op=PointingHead serial=265080 04:30:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:30:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:30:12 Point started: ret=0 04:30:12 point_skyscan result=0 04:30:13 Check angles 04:30:13 SkyScan query 04:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:30:13 Message to Master queued w/err=0: serial=265080 error=0 04:30:18 Received message from Master: op=Filter serial=265081 04:30:18 Color wheel filter change from 0 to 0 04:30:18 FLIGetFilterPos err=0 currentPosition=0 04:30:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:18 Filter is already there-color wheel unchanged 04:30:18 Received message from Master: op=Shutter serial=265082 04:30:18 Shutter LASER close 04:30:18 Received message from Camera: op=State serial=265084 04:30:18 GetSingleValue result=40 Value=cccccccc 04:30:18 SkyScan query 04:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:30:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:19 Parameters OK 04:30:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:19 Set A/D data flow result=40 04:30:19 Set A/D channel type result=40 04:30:19 Set A/D encoding result=40 04:30:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:19 Set channel filter=0.000000e+000 result=40 04:30:19 Config A/D Result=40 04:30:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:19 Get A/D filter: -9.255963e+061 result=40 04:30:19 Get A/D value=-858993460 result=40 04:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:19 Parameters OK 04:30:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:19 Set A/D data flow result=40 04:30:19 Set A/D channel type result=40 04:30:19 Set A/D encoding result=40 04:30:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:19 Set channel filter=0.000000e+000 result=40 04:30:19 Config A/D Result=40 04:30:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:19 Get A/D filter: -9.255963e+061 result=40 04:30:19 Get A/D value=-858993460 result=40 04:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:19 Aux= 04:30:19 Message to Camera, serial 265084 queued 04:30:56 Received message from Master: op=PointingHead serial=265097 04:30:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:30:56 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:30:56 Point started: ret=0 04:30:56 point_skyscan result=0 04:30:57 Check angles 04:30:57 SkyScan query 04:30:57 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 04:30:57 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 04:30:58 Check angles 04:30:58 SkyScan query 04:30:58 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 04:30:58 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 04:30:58 Check angles 04:30:58 SkyScan query 04:30:59 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 04:30:59 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 04:30:59 Check angles 04:30:59 SkyScan query 04:31:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:31:00 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:31:00 Message to Master queued w/err=0: serial=265097 error=0 04:31:05 Received message from Master: op=Filter serial=265098 04:31:05 Color wheel filter change from 0 to 0 04:31:05 FLIGetFilterPos err=0 currentPosition=0 04:31:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:05 Filter is already there-color wheel unchanged 04:31:05 Received message from Master: op=Shutter serial=265099 04:31:05 Shutter LASER close 04:31:05 Received message from Camera: op=State serial=265101 04:31:05 GetSingleValue result=40 Value=cccccccc 04:31:05 SkyScan query 04:31:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:31:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:05 Parameters OK 04:31:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:05 Set A/D data flow result=40 04:31:05 Set A/D channel type result=40 04:31:05 Set A/D encoding result=40 04:31:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:05 Set channel filter=0.000000e+000 result=40 04:31:05 Config A/D Result=40 04:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:05 Get A/D filter: -9.255963e+061 result=40 04:31:05 Get A/D value=-858993460 result=40 04:31:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:05 Parameters OK 04:31:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:05 Set A/D data flow result=40 04:31:05 Set A/D channel type result=40 04:31:05 Set A/D encoding result=40 04:31:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:05 Set channel filter=0.000000e+000 result=40 04:31:05 Config A/D Result=40 04:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:05 Get A/D filter: -9.255963e+061 result=40 04:31:05 Get A/D value=-858993460 result=40 04:31:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:05 Aux= 04:31:05 Message to Camera, serial 265101 queued 04:31:41 Received message from Master: op=PointingHead serial=265113 04:31:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:31:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:31:42 Point started: ret=0 04:31:42 point_skyscan result=0 04:31:42 Check angles 04:31:42 SkyScan query 04:31:43 SkyScan query done: ret=0 az=152.58<-10172 ze=6.51<-11566 Statuses=0009 0008 04:31:43 Msec=0 True Az=152.58 Ze=6.51 Az status=0009 Ze status=0008 04:31:43 Check angles 04:31:43 SkyScan query 04:31:44 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 04:31:44 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 04:31:44 Check angles 04:31:44 SkyScan query 04:31:45 SkyScan query done: ret=0 az=117.165<-7811 ze=6.495<-11567 Statuses=0009 0008 04:31:45 Msec=1500 True Az=117.165 Ze=6.495 Az status=0009 Ze status=0008 04:31:45 Check angles 04:31:45 SkyScan query 04:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:45 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:31:45 Message to Master queued w/err=0: serial=265113 error=0 04:31:50 Received message from Master: op=Filter serial=265114 04:31:50 Color wheel filter change from 0 to 0 04:31:50 FLIGetFilterPos err=0 currentPosition=0 04:31:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:50 Filter is already there-color wheel unchanged 04:31:50 Received message from Master: op=Shutter serial=265115 04:31:50 Shutter LASER close 04:31:51 Received message from Camera: op=State serial=265117 04:31:51 GetSingleValue result=40 Value=cccccccc 04:31:51 SkyScan query 04:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:31:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:51 Parameters OK 04:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:51 Set A/D data flow result=40 04:31:51 Set A/D channel type result=40 04:31:51 Set A/D encoding result=40 04:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:51 Set channel filter=0.000000e+000 result=40 04:31:51 Config A/D Result=40 04:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:51 Get A/D filter: -9.255963e+061 result=40 04:31:51 Get A/D value=-858993460 result=40 04:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:51 Parameters OK 04:31:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:51 Set A/D data flow result=40 04:31:51 Set A/D channel type result=40 04:31:51 Set A/D encoding result=40 04:31:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:51 Set channel filter=0.000000e+000 result=40 04:31:51 Config A/D Result=40 04:31:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:51 Get A/D filter: -9.255963e+061 result=40 04:31:51 Get A/D value=-858993460 result=40 04:31:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:51 Aux= 04:31:51 Message to Camera, serial 265117 queued 04:32:28 Received message from Master: op=PointingHead serial=265130 04:32:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:32:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:32:28 Point started: ret=0 04:32:28 point_skyscan result=0 04:32:29 Check angles 04:32:29 SkyScan query 04:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-22.995<-13533 Statuses=0008 0009 04:32:30 Msec=0 True Az=112.995 Ze=-22.995 Az status=0008 Ze status=0009 04:32:30 Check angles 04:32:30 SkyScan query 04:32:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-43.995<-14933 Statuses=0008 0009 04:32:30 Msec=750 True Az=112.995 Ze=-43.995 Az status=0008 Ze status=0009 04:32:31 Check angles 04:32:31 SkyScan query 04:32:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.34<-16356 Statuses=0008 0009 04:32:31 Msec=1500 True Az=112.995 Ze=-65.34 Az status=0008 Ze status=0009 04:32:31 Check angles 04:32:31 SkyScan query 04:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 04:32:32 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 04:32:32 Check angles 04:32:32 SkyScan query 04:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 04:32:33 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 04:32:33 Check angles 04:32:33 SkyScan query 04:32:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 04:32:33 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 04:32:34 Check angles 04:32:34 SkyScan query 04:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 04:32:34 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 04:32:34 Check angles 04:32:34 SkyScan query 04:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.88<-23392 Statuses=0008 0009 04:32:35 Msec=5250 True Az=112.995 Ze=-170.88 Az status=0008 Ze status=0009 04:32:35 Check angles 04:32:35 SkyScan query 04:32:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:32:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:32:36 Message to Master queued w/err=0: serial=265130 error=0 04:32:41 Received message from Master: op=Filter serial=265131 04:32:41 Color wheel filter change from 0 to 0 04:32:41 FLIGetFilterPos err=0 currentPosition=0 04:32:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:41 Filter is already there-color wheel unchanged 04:32:41 Received message from Master: op=Shutter serial=265132 04:32:41 Shutter LASER open 04:32:41 Received message from Camera: op=State serial=265134 04:32:41 GetSingleValue result=40 Value=cccccccc 04:32:41 SkyScan query 04:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:32:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:42 Parameters OK 04:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:42 Set A/D data flow result=40 04:32:42 Set A/D channel type result=40 04:32:42 Set A/D encoding result=40 04:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:42 Set channel filter=0.000000e+000 result=40 04:32:42 Config A/D Result=40 04:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:42 Get A/D filter: -9.255963e+061 result=40 04:32:42 Get A/D value=-858993460 result=40 04:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:42 Parameters OK 04:32:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:42 Set A/D data flow result=40 04:32:42 Set A/D channel type result=40 04:32:42 Set A/D encoding result=40 04:32:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:42 Set channel filter=0.000000e+000 result=40 04:32:42 Config A/D Result=40 04:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:42 Get A/D filter: -9.255963e+061 result=40 04:32:42 Get A/D value=-858993460 result=40 04:32:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:42 Aux= 04:32:42 Message to Camera, serial 265134 queued 04:32:50 Received message from Master: op=Shutter serial=265144 04:32:50 Shutter LASER close 04:32:50 Received message from Master: op=PointingHead serial=265148 04:32:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:32:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:32:51 Point started: ret=0 04:32:51 point_skyscan result=0 04:32:52 Check angles 04:32:52 SkyScan query 04:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 04:32:52 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 04:32:52 Check angles 04:32:52 SkyScan query 04:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 04:32:53 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 04:32:53 Check angles 04:32:53 SkyScan query 04:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 04:32:54 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 04:32:54 Check angles 04:32:54 SkyScan query 04:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 04:32:54 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 04:32:55 Check angles 04:32:55 SkyScan query 04:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 04:32:55 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 04:32:55 Check angles 04:32:55 SkyScan query 04:32:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 04:32:56 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 04:32:56 Check angles 04:32:56 SkyScan query 04:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.215<-13081 Statuses=0008 0009 04:32:57 Msec=4500 True Az=112.995 Ze=-16.215 Az status=0008 Ze status=0009 04:32:57 Check angles 04:32:57 SkyScan query 04:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 04:32:57 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 04:32:58 Check angles 04:32:58 SkyScan query 04:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:32:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:32:58 Message to Master queued w/err=0: serial=265148 error=0 04:33:03 Received message from Master: op=Filter serial=265149 04:33:03 Color wheel filter change from 0 to 0 04:33:03 FLIGetFilterPos err=0 currentPosition=0 04:33:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:03 Filter is already there-color wheel unchanged 04:33:03 Received message from Master: op=Shutter serial=265150 04:33:03 Shutter LASER close 04:33:03 Received message from Camera: op=State serial=265152 04:33:03 GetSingleValue result=40 Value=cccccccc 04:33:03 SkyScan query 04:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:04 Parameters OK 04:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:04 Set A/D data flow result=40 04:33:04 Set A/D channel type result=40 04:33:04 Set A/D encoding result=40 04:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:04 Set channel filter=0.000000e+000 result=40 04:33:04 Config A/D Result=40 04:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:04 Get A/D filter: -9.255963e+061 result=40 04:33:04 Get A/D value=-858993460 result=40 04:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:04 Parameters OK 04:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:04 Set A/D data flow result=40 04:33:04 Set A/D channel type result=40 04:33:04 Set A/D encoding result=40 04:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:04 Set channel filter=0.000000e+000 result=40 04:33:04 Config A/D Result=40 04:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:04 Get A/D filter: -9.255963e+061 result=40 04:33:04 Get A/D value=-858993460 result=40 04:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:04 Aux= 04:33:04 Message to Camera, serial 265152 queued 04:33:35 Received message from Master: op=Identify serial=265156 04:33:41 Received message from Master: op=PointingHead serial=265168 04:33:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:33:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:33:41 Point started: ret=0 04:33:41 point_skyscan result=0 04:33:42 Check angles 04:33:42 SkyScan query 04:33:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:33:43 Message to Master queued w/err=0: serial=265168 error=0 04:33:48 Received message from Master: op=Filter serial=265169 04:33:48 Color wheel filter change from 0 to 0 04:33:48 FLIGetFilterPos err=0 currentPosition=0 04:33:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:48 Filter is already there-color wheel unchanged 04:33:48 Received message from Master: op=Shutter serial=265170 04:33:48 Shutter LASER close 04:33:48 Received message from Camera: op=State serial=265172 04:33:48 GetSingleValue result=40 Value=cccccccc 04:33:48 SkyScan query 04:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:33:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:48 Parameters OK 04:33:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:48 Set A/D data flow result=40 04:33:48 Set A/D channel type result=40 04:33:48 Set A/D encoding result=40 04:33:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:48 Set channel filter=0.000000e+000 result=40 04:33:48 Config A/D Result=40 04:33:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:48 Get A/D filter: -9.255963e+061 result=40 04:33:48 Get A/D value=-858993460 result=40 04:33:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:48 Parameters OK 04:33:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:48 Set A/D data flow result=40 [UTC 2019-3-14 04:33:48] 04:33:48 Set A/D channel type result=40 04:33:48 Set A/D encoding result=40 04:33:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:48 Set channel filter=0.000000e+000 result=40 04:33:48 Config A/D Result=40 04:33:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:48 Get A/D filter: -9.255963e+061 result=40 04:33:48 Get A/D value=-858993460 result=40 04:33:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:48 Aux= 04:33:48 Message to Camera, serial 265172 queued 04:34:25 Received message from Master: op=PointingHead serial=265185 04:34:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:34:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:34:26 Point started: ret=0 04:34:26 point_skyscan result=0 04:34:26 Check angles 04:34:26 SkyScan query 04:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:34:27 Message to Master queued w/err=0: serial=265185 error=0 04:34:32 Received message from Master: op=Filter serial=265186 04:34:32 Color wheel filter change from 0 to 0 04:34:32 FLIGetFilterPos err=0 currentPosition=0 04:34:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:32 Filter is already there-color wheel unchanged 04:34:32 Received message from Master: op=Shutter serial=265187 04:34:32 Shutter LASER close 04:34:32 Received message from Camera: op=State serial=265189 04:34:32 GetSingleValue result=40 Value=cccccccc 04:34:32 SkyScan query 04:34:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:34:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:33 Parameters OK 04:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:33 Set A/D data flow result=40 04:34:33 Set A/D channel type result=40 04:34:33 Set A/D encoding result=40 04:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:33 Set channel filter=0.000000e+000 result=40 04:34:33 Config A/D Result=40 04:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:33 Get A/D filter: -9.255963e+061 result=40 04:34:33 Get A/D value=-858993460 result=40 04:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:33 Parameters OK 04:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:33 Set A/D data flow result=40 04:34:33 Set A/D channel type result=40 04:34:33 Set A/D encoding result=40 04:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:33 Set channel filter=0.000000e+000 result=40 04:34:33 Config A/D Result=40 04:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:33 Get A/D filter: -9.255963e+061 result=40 04:34:33 Get A/D value=-858993460 result=40 04:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:33 Aux= 04:34:33 Message to Camera, serial 265189 queued 04:35:10 Received message from Master: op=PointingHead serial=265202 04:35:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:35:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:35:10 Point started: ret=0 04:35:10 point_skyscan result=0 04:35:11 Check angles 04:35:11 SkyScan query 04:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:35:11 Message to Master queued w/err=0: serial=265202 error=0 04:35:16 Received message from Master: op=Filter serial=265203 04:35:16 Color wheel filter change from 0 to 0 04:35:16 FLIGetFilterPos err=0 currentPosition=0 04:35:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:16 Filter is already there-color wheel unchanged 04:35:16 Received message from Master: op=Shutter serial=265204 04:35:16 Shutter LASER close 04:35:16 Received message from Camera: op=State serial=265206 04:35:16 GetSingleValue result=40 Value=cccccccc 04:35:16 SkyScan query 04:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:35:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:17 Parameters OK 04:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:17 Set A/D data flow result=40 04:35:17 Set A/D channel type result=40 04:35:17 Set A/D encoding result=40 04:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:17 Set channel filter=0.000000e+000 result=40 04:35:17 Config A/D Result=40 04:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:17 Get A/D filter: -9.255963e+061 result=40 04:35:17 Get A/D value=-858993460 result=40 04:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:17 Parameters OK 04:35:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:17 Set A/D data flow result=40 04:35:17 Set A/D channel type result=40 04:35:17 Set A/D encoding result=40 04:35:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:17 Set channel filter=0.000000e+000 result=40 04:35:17 Config A/D Result=40 04:35:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:17 Get A/D filter: -9.255963e+061 result=40 04:35:17 Get A/D value=-858993460 result=40 04:35:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:17 Aux= 04:35:17 Message to Camera, serial 265206 queued 04:35:54 Received message from Master: op=PointingHead serial=265219 04:35:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:35:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:35:54 Point started: ret=0 04:35:54 point_skyscan result=0 04:35:55 Check angles 04:35:55 SkyScan query 04:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 04:35:55 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 04:35:56 Check angles 04:35:56 SkyScan query 04:35:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 04:35:56 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 04:35:56 Check angles 04:35:56 SkyScan query 04:35:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 04:35:57 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 04:35:57 Check angles 04:35:57 SkyScan query 04:35:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 04:35:58 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 04:35:58 Check angles 04:35:58 SkyScan query 04:35:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 04:35:58 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 04:35:59 Check angles 04:35:59 SkyScan query 04:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 04:35:59 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 04:35:59 Check angles 04:35:59 SkyScan query 04:36:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.265<-21951 Statuses=0008 0009 04:36:00 Msec=4500 True Az=112.995 Ze=-149.265 Az status=0008 Ze status=0009 04:36:00 Check angles 04:36:00 SkyScan query 04:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.205<-23347 Statuses=0008 0009 04:36:01 Msec=5250 True Az=112.995 Ze=-170.205 Az status=0008 Ze status=0009 04:36:01 Check angles 04:36:01 SkyScan query 04:36:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:36:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:36:01 Message to Master queued w/err=0: serial=265219 error=0 04:36:07 Received message from Master: op=Filter serial=265220 04:36:07 Color wheel filter change from 0 to 0 04:36:07 FLIGetFilterPos err=0 currentPosition=0 04:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:07 Filter is already there-color wheel unchanged 04:36:07 Received message from Master: op=Shutter serial=265221 04:36:07 Shutter LASER open 04:36:07 Received message from Camera: op=State serial=265223 04:36:07 GetSingleValue result=40 Value=cccccccc 04:36:07 SkyScan query 04:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:07 Parameters OK 04:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:07 Set A/D data flow result=40 04:36:07 Set A/D channel type result=40 04:36:07 Set A/D encoding result=40 04:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:07 Set channel filter=0.000000e+000 result=40 04:36:07 Config A/D Result=40 04:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:07 Get A/D filter: -9.255963e+061 result=40 04:36:07 Get A/D value=-858993460 result=40 04:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:07 Parameters OK 04:36:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:07 Set A/D data flow result=40 04:36:07 Set A/D channel type result=40 04:36:07 Set A/D encoding result=40 04:36:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:07 Set channel filter=0.000000e+000 result=40 04:36:07 Config A/D Result=40 04:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:07 Get A/D filter: -9.255963e+061 result=40 04:36:07 Get A/D value=-858993460 result=40 04:36:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:07 Aux= 04:36:07 Message to Camera, serial 265223 queued 04:36:15 Received message from Master: op=Shutter serial=265232 04:36:15 Shutter LASER close 04:36:16 Received message from Master: op=PointingHead serial=265236 04:36:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:36:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:36:16 Point started: ret=0 04:36:16 point_skyscan result=0 04:36:17 Check angles 04:36:17 SkyScan query 04:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 04:36:17 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 04:36:17 Check angles 04:36:17 SkyScan query 04:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.68<-20112 Statuses=0008 0009 04:36:18 Msec=750 True Az=112.995 Ze=-121.68 Az status=0008 Ze status=0009 04:36:18 Check angles 04:36:18 SkyScan query 04:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 04:36:19 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 04:36:19 Check angles 04:36:19 SkyScan query 04:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 04:36:19 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 04:36:20 Check angles 04:36:20 SkyScan query 04:36:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.875<-15925 Statuses=0008 0009 04:36:20 Msec=3000 True Az=112.995 Ze=-58.875 Az status=0008 Ze status=0009 04:36:20 Check angles 04:36:20 SkyScan query 04:36:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 04:36:21 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 04:36:21 Check angles 04:36:21 SkyScan query 04:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 04:36:22 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 04:36:22 Check angles 04:36:22 SkyScan query 04:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 04:36:22 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 04:36:23 Check angles 04:36:23 SkyScan query 04:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:36:23 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:36:23 Message to Master queued w/err=0: serial=265236 error=0 04:36:28 Received message from Master: op=Filter serial=265237 04:36:28 Color wheel filter change from 0 to 0 04:36:28 FLIGetFilterPos err=0 currentPosition=0 04:36:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:28 Filter is already there-color wheel unchanged 04:36:28 Received message from Master: op=Shutter serial=265238 04:36:28 Shutter LASER close 04:36:29 Received message from Camera: op=State serial=265240 04:36:29 GetSingleValue result=40 Value=cccccccc 04:36:29 SkyScan query 04:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:36:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:29 Parameters OK 04:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:29 Set A/D data flow result=40 04:36:29 Set A/D channel type result=40 04:36:29 Set A/D encoding result=40 04:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:29 Set channel filter=0.000000e+000 result=40 04:36:29 Config A/D Result=40 04:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:29 Get A/D filter: -9.255963e+061 result=40 04:36:29 Get A/D value=-858993460 result=40 04:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:29 Parameters OK 04:36:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:29 Set A/D data flow result=40 04:36:29 Set A/D channel type result=40 04:36:29 Set A/D encoding result=40 04:36:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:29 Set channel filter=0.000000e+000 result=40 04:36:29 Config A/D Result=40 04:36:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:29 Get A/D filter: -9.255963e+061 result=40 04:36:29 Get A/D value=-858993460 result=40 04:36:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:29 Aux= 04:36:29 Message to Camera, serial 265240 queued 04:37:06 Received message from Master: op=PointingHead serial=265253 04:37:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:37:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:37:06 Point started: ret=0 04:37:06 point_skyscan result=0 04:37:07 Check angles 04:37:07 SkyScan query 04:37:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:37:08 Message to Master queued w/err=0: serial=265253 error=0 04:37:13 Received message from Master: op=Filter serial=265254 04:37:13 Color wheel filter change from 0 to 0 04:37:13 FLIGetFilterPos err=0 currentPosition=0 04:37:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:13 Filter is already there-color wheel unchanged 04:37:13 Received message from Master: op=Shutter serial=265255 04:37:13 Shutter LASER close 04:37:13 Received message from Camera: op=State serial=265257 04:37:13 GetSingleValue result=40 Value=cccccccc 04:37:13 SkyScan query 04:37:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:13 Parameters OK 04:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:13 Set A/D data flow result=40 04:37:13 Set A/D channel type result=40 04:37:13 Set A/D encoding result=40 04:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:13 Set channel filter=0.000000e+000 result=40 04:37:13 Config A/D Result=40 04:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:13 Get A/D filter: -9.255963e+061 result=40 04:37:13 Get A/D value=-858993460 result=40 04:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:13 Parameters OK 04:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:13 Set A/D data flow result=40 04:37:13 Set A/D channel type result=40 04:37:13 Set A/D encoding result=40 04:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:13 Set channel filter=0.000000e+000 result=40 04:37:13 Config A/D Result=40 04:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:13 Get A/D filter: -9.255963e+061 result=40 04:37:13 Get A/D value=-858993460 result=40 04:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:13 Aux= 04:37:13 Message to Camera, serial 265257 queued 04:37:50 Received message from Master: op=PointingHead serial=265270 04:37:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:37:50 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:37:51 Point started: ret=0 04:37:51 point_skyscan result=0 04:37:51 Check angles 04:37:51 SkyScan query 04:37:52 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 04:37:52 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 04:37:52 Check angles 04:37:52 SkyScan query 04:37:53 SkyScan query done: ret=0 az=153.255<-10217 ze=-6.495<-12433 Statuses=0009 0008 04:37:53 Msec=750 True Az=153.255 Ze=-6.495 Az status=0009 Ze status=0008 04:37:53 Check angles 04:37:53 SkyScan query 04:37:53 SkyScan query done: ret=0 az=170.67<-11378 ze=-6.495<-12433 Statuses=0009 0008 04:37:53 Msec=1500 True Az=170.67 Ze=-6.495 Az status=0009 Ze status=0008 04:37:54 Check angles 04:37:54 SkyScan query 04:37:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:37:54 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:37:54 Message to Master queued w/err=0: serial=265270 error=0 04:37:59 Received message from Master: op=Filter serial=265271 04:37:59 Color wheel filter change from 0 to 0 04:37:59 FLIGetFilterPos err=0 currentPosition=0 04:37:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:59 Filter is already there-color wheel unchanged 04:37:59 Received message from Master: op=Shutter serial=265272 04:37:59 Shutter LASER close 04:37:59 Received message from Camera: op=State serial=265274 04:37:59 GetSingleValue result=40 Value=cccccccc 04:37:59 SkyScan query 04:38:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:38:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:00 Parameters OK 04:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:00 Set A/D data flow result=40 04:38:00 Set A/D channel type result=40 04:38:00 Set A/D encoding result=40 04:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:00 Set channel filter=0.000000e+000 result=40 04:38:00 Config A/D Result=40 04:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:00 Get A/D filter: -9.255963e+061 result=40 04:38:00 Get A/D value=-858993460 result=40 04:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:00 Parameters OK 04:38:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:00 Set A/D data flow result=40 04:38:00 Set A/D channel type result=40 04:38:00 Set A/D encoding result=40 04:38:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:00 Set channel filter=0.000000e+000 result=40 04:38:00 Config A/D Result=40 04:38:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:00 Get A/D filter: -9.255963e+061 result=40 04:38:00 Get A/D value=-858993460 result=40 04:38:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:00 Aux= 04:38:00 Message to Camera, serial 265274 queued 04:38:37 Received message from Master: op=PointingHead serial=265287 04:38:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:38:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:38:37 Point started: ret=0 04:38:37 point_skyscan result=0 04:38:38 Check angles 04:38:38 SkyScan query 04:38:39 SkyScan query done: ret=0 az=153<-10200 ze=6.51<-11566 Statuses=0009 0008 04:38:39 Msec=0 True Az=153 Ze=6.51 Az status=0009 Ze status=0008 04:38:39 Check angles 04:38:39 SkyScan query 04:38:39 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 04:38:39 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 04:38:40 Check angles 04:38:40 SkyScan query 04:38:40 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 04:38:40 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 04:38:40 Check angles 04:38:40 SkyScan query 04:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:41 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:38:41 Message to Master queued w/err=0: serial=265287 error=0 04:38:46 Received message from Master: op=Filter serial=265288 04:38:46 Color wheel filter change from 0 to 0 04:38:46 FLIGetFilterPos err=0 currentPosition=0 04:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:46 Filter is already there-color wheel unchanged 04:38:46 Received message from Master: op=Shutter serial=265289 04:38:46 Shutter LASER close 04:38:46 Received message from Camera: op=State serial=265291 04:38:46 GetSingleValue result=40 Value=cccccccc 04:38:46 SkyScan query 04:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:47 Parameters OK 04:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:47 Set A/D data flow result=40 04:38:47 Set A/D channel type result=40 04:38:47 Set A/D encoding result=40 04:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:47 Set channel filter=0.000000e+000 result=40 04:38:47 Config A/D Result=40 04:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:47 Get A/D filter: -9.255963e+061 result=40 04:38:47 Get A/D value=-858993460 result=40 04:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:47 Parameters OK 04:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:47 Set A/D data flow result=40 04:38:47 Set A/D channel type result=40 04:38:47 Set A/D encoding result=40 04:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:47 Set channel filter=0.000000e+000 result=40 04:38:47 Config A/D Result=40 04:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:47 Get A/D filter: -9.255963e+061 result=40 04:38:47 Get A/D value=-858993460 result=40 04:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:47 Aux= 04:38:47 Message to Camera, serial 265291 queued 04:39:23 Received message from Master: op=PointingHead serial=265304 04:39:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:24 Point started: ret=0 04:39:24 point_skyscan result=0 04:39:25 Check angles 04:39:25 SkyScan query 04:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.85<-13590 Statuses=0008 0009 04:39:25 Msec=0 True Az=112.995 Ze=-23.85 Az status=0008 Ze status=0009 04:39:25 Check angles 04:39:25 SkyScan query 04:39:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 04:39:26 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 04:39:26 Check angles 04:39:26 SkyScan query 04:39:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 04:39:27 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 04:39:27 Check angles 04:39:27 SkyScan query 04:39:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.18<-17812 Statuses=0008 0009 04:39:27 Msec=2250 True Az=112.995 Ze=-87.18 Az status=0008 Ze status=0009 04:39:28 Check angles 04:39:28 SkyScan query 04:39:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 04:39:28 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 04:39:28 Check angles 04:39:28 SkyScan query 04:39:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 04:39:29 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 04:39:29 Check angles 04:39:29 SkyScan query 04:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 04:39:30 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 04:39:30 Check angles 04:39:30 SkyScan query 04:39:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 04:39:30 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 04:39:31 Check angles 04:39:31 SkyScan query 04:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:39:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:39:31 Message to Master queued w/err=0: serial=265304 error=0 04:39:36 Received message from Master: op=Filter serial=265305 04:39:36 Color wheel filter change from 0 to 0 04:39:36 FLIGetFilterPos err=0 currentPosition=0 04:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:36 Filter is already there-color wheel unchanged 04:39:36 Received message from Master: op=Shutter serial=265306 04:39:36 Shutter LASER open 04:39:37 Received message from Camera: op=State serial=265308 04:39:37 GetSingleValue result=40 Value=cccccccc 04:39:37 SkyScan query 04:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:37 Parameters OK 04:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:37 Set A/D data flow result=40 04:39:37 Set A/D channel type result=40 04:39:37 Set A/D encoding result=40 04:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:37 Set channel filter=0.000000e+000 result=40 04:39:37 Config A/D Result=40 04:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:37 Get A/D filter: -9.255963e+061 result=40 04:39:37 Get A/D value=-858993460 result=40 04:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:37 Parameters OK 04:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:37 Set A/D data flow result=40 04:39:37 Set A/D channel type result=40 04:39:37 Set A/D encoding result=40 04:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:37 Set channel filter=0.000000e+000 result=40 04:39:37 Config A/D Result=40 04:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:37 Get A/D filter: -9.255963e+061 result=40 04:39:37 Get A/D value=-858993460 result=40 04:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:37 Aux= 04:39:37 Message to Camera, serial 265308 queued 04:39:46 Received message from Master: op=Shutter serial=265318 04:39:46 Shutter LASER close 04:39:46 Received message from Master: op=PointingHead serial=265322 04:39:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:39:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:39:46 Point started: ret=0 04:39:46 point_skyscan result=0 04:39:47 Check angles 04:39:47 SkyScan query 04:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 04:39:48 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 04:39:48 Check angles 04:39:48 SkyScan query 04:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 04:39:48 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 04:39:49 Check angles 04:39:49 SkyScan query 04:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 04:39:49 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 04:39:49 Check angles 04:39:49 SkyScan query 04:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 04:39:50 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 04:39:50 Check angles 04:39:50 SkyScan query 04:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.07<-15938 Statuses=0008 0009 04:39:51 Msec=3000 True Az=112.995 Ze=-59.07 Az status=0008 Ze status=0009 04:39:51 Check angles 04:39:51 SkyScan query 04:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.055<-14537 Statuses=0008 0009 04:39:51 Msec=3750 True Az=112.995 Ze=-38.055 Az status=0008 Ze status=0009 04:39:52 Check angles 04:39:52 SkyScan query 04:39:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 04:39:52 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 04:39:52 Check angles 04:39:52 SkyScan query 04:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.84<-11744 Statuses=0008 0009 04:39:53 Msec=5250 True Az=112.995 Ze=3.84 Az status=0008 Ze status=0009 04:39:53 Check angles 04:39:53 SkyScan query 04:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:39:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:39:54 Message to Master queued w/err=0: serial=265322 error=0 04:39:59 Received message from Master: op=Filter serial=265323 04:39:59 Color wheel filter change from 0 to 0 04:39:59 FLIGetFilterPos err=0 currentPosition=0 04:39:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:59 Filter is already there-color wheel unchanged 04:39:59 Received message from Master: op=Shutter serial=265324 04:39:59 Shutter LASER close 04:39:59 Received message from Camera: op=State serial=265326 04:39:59 GetSingleValue result=40 Value=cccccccc 04:39:59 SkyScan query 04:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:00 Parameters OK 04:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:00 Set A/D data flow result=40 04:40:00 Set A/D channel type result=40 04:40:00 Set A/D encoding result=40 04:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:00 Set channel filter=0.000000e+000 result=40 04:40:00 Config A/D Result=40 04:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:00 Get A/D filter: -9.255963e+061 result=40 04:40:00 Get A/D value=-858993460 result=40 04:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:00 Parameters OK 04:40:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:00 Set A/D data flow result=40 04:40:00 Set A/D channel type result=40 04:40:00 Set A/D encoding result=40 04:40:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:00 Set channel filter=0.000000e+000 result=40 04:40:00 Config A/D Result=40 04:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:00 Get A/D filter: -9.255963e+061 result=40 04:40:00 Get A/D value=-858993460 result=40 04:40:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:00 Aux= 04:40:00 Message to Camera, serial 265326 queued 04:40:36 Received message from Master: op=PointingHead serial=265339 04:40:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:40:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:40:37 Point started: ret=0 04:40:37 point_skyscan result=0 04:40:38 Check angles 04:40:38 SkyScan query 04:40:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:40:38 Message to Master queued w/err=0: serial=265339 error=0 04:40:43 Received message from Master: op=Filter serial=265340 04:40:43 Color wheel filter change from 0 to 0 04:40:43 FLIGetFilterPos err=0 currentPosition=0 04:40:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:43 Filter is already there-color wheel unchanged 04:40:43 Received message from Master: op=Shutter serial=265341 04:40:43 Shutter LASER close 04:40:43 Received message from Camera: op=State serial=265343 04:40:43 GetSingleValue result=40 Value=cccccccc 04:40:43 SkyScan query 04:40:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:40:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:44 Parameters OK 04:40:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:44 Set A/D data flow result=40 04:40:44 Set A/D channel type result=40 04:40:44 Set A/D encoding result=40 04:40:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:44 Set channel filter=0.000000e+000 result=40 04:40:44 Config A/D Result=40 04:40:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:44 Get A/D filter: -9.255963e+061 result=40 04:40:44 Get A/D value=-858993460 result=40 04:40:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:44 Parameters OK 04:40:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:44 Set A/D data flow result=40 04:40:44 Set A/D channel type result=40 04:40:44 Set A/D encoding result=40 04:40:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:44 Set channel filter=0.000000e+000 result=40 04:40:44 Config A/D Result=40 04:40:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:44 Get A/D filter: -9.255963e+061 result=40 04:40:44 Get A/D value=-858993460 result=40 04:40:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:44 Aux= 04:40:44 Message to Camera, serial 265343 queued 04:41:21 Received message from Master: op=PointingHead serial=265356 04:41:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:41:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:41:21 Point started: ret=0 04:41:21 point_skyscan result=0 04:41:22 Check angles 04:41:22 SkyScan query 04:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:41:22 Message to Master queued w/err=0: serial=265356 error=0 04:41:27 Received message from Master: op=Filter serial=265357 04:41:27 Color wheel filter change from 0 to 0 04:41:27 FLIGetFilterPos err=0 currentPosition=0 04:41:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:27 Filter is already there-color wheel unchanged 04:41:28 Received message from Master: op=Shutter serial=265358 04:41:28 Shutter LASER close 04:41:28 Received message from Camera: op=State serial=265360 04:41:28 GetSingleValue result=40 Value=cccccccc 04:41:28 SkyScan query 04:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:28 Parameters OK 04:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:28 Set A/D data flow result=40 04:41:28 Set A/D channel type result=40 04:41:28 Set A/D encoding result=40 04:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:28 Set channel filter=0.000000e+000 result=40 04:41:28 Config A/D Result=40 04:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:28 Get A/D filter: -9.255963e+061 result=40 04:41:28 Get A/D value=-858993460 result=40 04:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:28 Parameters OK 04:41:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:28 Set A/D data flow result=40 04:41:28 Set A/D channel type result=40 04:41:28 Set A/D encoding result=40 04:41:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:28 Set channel filter=0.000000e+000 result=40 04:41:28 Config A/D Result=40 04:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:28 Get A/D filter: -9.255963e+061 result=40 04:41:28 Get A/D value=-858993460 result=40 04:41:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:28 Aux= 04:41:28 Message to Camera, serial 265360 queued 04:42:05 Received message from Master: op=PointingHead serial=265373 04:42:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:42:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:42:05 Point started: ret=0 04:42:05 point_skyscan result=0 04:42:06 Check angles 04:42:06 SkyScan query 04:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:42:07 Message to Master queued w/err=0: serial=265373 error=0 04:42:12 Received message from Master: op=Filter serial=265374 04:42:12 Color wheel filter change from 0 to 0 04:42:12 FLIGetFilterPos err=0 currentPosition=0 04:42:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:12 Filter is already there-color wheel unchanged 04:42:12 Received message from Master: op=Shutter serial=265375 04:42:12 Shutter LASER close 04:42:12 Received message from Camera: op=State serial=265377 04:42:12 GetSingleValue result=40 Value=cccccccc 04:42:12 SkyScan query 04:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:12 Parameters OK 04:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:12 Set A/D data flow result=40 04:42:12 Set A/D channel type result=40 04:42:12 Set A/D encoding result=40 04:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:12 Set channel filter=0.000000e+000 result=40 04:42:12 Config A/D Result=40 04:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:12 Get A/D filter: -9.255963e+061 result=40 04:42:12 Get A/D value=-858993460 result=40 04:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:12 Parameters OK 04:42:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:12 Set A/D data flow result=40 04:42:12 Set A/D channel type result=40 04:42:12 Set A/D encoding result=40 04:42:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:12 Set channel filter=0.000000e+000 result=40 04:42:12 Config A/D Result=40 04:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:12 Get A/D filter: -9.255963e+061 result=40 04:42:12 Get A/D value=-858993460 result=40 04:42:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:12 Aux= 04:42:12 Message to Camera, serial 265377 queued 04:42:49 Received message from Master: op=PointingHead serial=265390 04:42:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:50 Point started: ret=0 04:42:50 point_skyscan result=0 04:42:50 Check angles 04:42:50 SkyScan query 04:42:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 04:42:51 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 04:42:51 Check angles 04:42:51 SkyScan query 04:42:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 04:42:52 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 04:42:52 Check angles 04:42:52 SkyScan query 04:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 04:42:53 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 04:42:53 Check angles 04:42:53 SkyScan query 04:42:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.135<-17809 Statuses=0008 0009 04:42:53 Msec=2250 True Az=112.995 Ze=-87.135 Az status=0008 Ze status=0009 04:42:54 Check angles 04:42:54 SkyScan query 04:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 04:42:54 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 04:42:54 Check angles 04:42:54 SkyScan query 04:42:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.93<-20662 Statuses=0008 0009 04:42:55 Msec=3750 True Az=112.995 Ze=-129.93 Az status=0008 Ze status=0009 04:42:55 Check angles 04:42:55 SkyScan query 04:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.855<-22057 Statuses=0008 0009 04:42:56 Msec=4500 True Az=112.995 Ze=-150.855 Az status=0008 Ze status=0009 04:42:56 Check angles 04:42:56 SkyScan query 04:42:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 04:42:56 Msec=5250 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 04:42:57 Check angles 04:42:57 SkyScan query 04:42:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:42:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:42:57 Message to Master queued w/err=0: serial=265390 error=0 04:43:02 Received message from Master: op=Filter serial=265391 04:43:02 Color wheel filter change from 0 to 0 04:43:02 FLIGetFilterPos err=0 currentPosition=0 04:43:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:02 Filter is already there-color wheel unchanged 04:43:02 Received message from Master: op=Shutter serial=265392 04:43:02 Shutter LASER open 04:43:02 Received message from Camera: op=State serial=265394 04:43:02 GetSingleValue result=40 Value=cccccccc 04:43:02 SkyScan query 04:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:03 Parameters OK 04:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:03 Set A/D data flow result=40 04:43:03 Set A/D channel type result=40 04:43:03 Set A/D encoding result=40 04:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:03 Set channel filter=0.000000e+000 result=40 04:43:03 Config A/D Result=40 04:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:03 Get A/D filter: -9.255963e+061 result=40 04:43:03 Get A/D value=-858993460 result=40 04:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:03 Parameters OK 04:43:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:03 Set A/D data flow result=40 04:43:03 Set A/D channel type result=40 04:43:03 Set A/D encoding result=40 04:43:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:03 Set channel filter=0.000000e+000 result=40 04:43:03 Config A/D Result=40 04:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:03 Get A/D filter: -9.255963e+061 result=40 04:43:03 Get A/D value=-858993460 result=40 04:43:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:03 Aux= 04:43:03 Message to Camera, serial 265394 queued 04:43:11 Received message from Master: op=Shutter serial=265404 04:43:11 Shutter LASER close 04:43:12 Received message from Master: op=PointingHead serial=265408 04:43:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:43:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:43:12 Point started: ret=0 04:43:12 point_skyscan result=0 04:43:13 Check angles 04:43:13 SkyScan query 04:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 04:43:14 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 04:43:14 Check angles 04:43:14 SkyScan query 04:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 04:43:14 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 04:43:15 Check angles 04:43:15 SkyScan query 04:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 04:43:15 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 04:43:15 Check angles 04:43:15 SkyScan query 04:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 04:43:16 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 04:43:16 Check angles 04:43:16 SkyScan query 04:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 04:43:17 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 04:43:17 Check angles 04:43:17 SkyScan query 04:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 04:43:17 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 04:43:18 Check angles 04:43:18 SkyScan query 04:43:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.055<-13137 Statuses=0008 0009 04:43:18 Msec=4500 True Az=112.995 Ze=-17.055 Az status=0008 Ze status=0009 04:43:18 Check angles 04:43:18 SkyScan query 04:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=3.945<-11737 Statuses=0008 0009 04:43:19 Msec=5250 True Az=112.995 Ze=3.945 Az status=0008 Ze status=0009 04:43:19 Check angles 04:43:19 SkyScan query 04:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:43:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:43:20 Message to Master queued w/err=0: serial=265408 error=0 04:43:25 Received message from Master: op=Filter serial=265409 04:43:25 Color wheel filter change from 0 to 0 04:43:25 FLIGetFilterPos err=0 currentPosition=0 04:43:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:25 Filter is already there-color wheel unchanged 04:43:25 Received message from Master: op=Shutter serial=265410 04:43:25 Shutter LASER close 04:43:25 Received message from Camera: op=State serial=265412 04:43:25 GetSingleValue result=40 Value=cccccccc 04:43:25 SkyScan query 04:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:43:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:26 Parameters OK 04:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:26 Set A/D data flow result=40 04:43:26 Set A/D channel type result=40 04:43:26 Set A/D encoding result=40 04:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:26 Set channel filter=0.000000e+000 result=40 04:43:26 Config A/D Result=40 04:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:26 Get A/D filter: -9.255963e+061 result=40 04:43:26 Get A/D value=-858993460 result=40 04:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:26 Parameters OK 04:43:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:26 Set A/D data flow result=40 04:43:26 Set A/D channel type result=40 04:43:26 Set A/D encoding result=40 04:43:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:26 Set channel filter=0.000000e+000 result=40 04:43:26 Config A/D Result=40 04:43:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:26 Get A/D filter: -9.255963e+061 result=40 04:43:26 Get A/D value=-858993460 result=40 04:43:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:26 Aux= 04:43:26 Message to Camera, serial 265412 queued [UTC 2019-3-14 04:43:48] 04:44:03 Received message from Master: op=PointingHead serial=265425 04:44:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:44:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:44:03 Point started: ret=0 04:44:03 point_skyscan result=0 04:44:04 Check angles 04:44:04 SkyScan query 04:44:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:44:04 Message to Master queued w/err=0: serial=265425 error=0 04:44:09 Received message from Master: op=Filter serial=265426 04:44:09 Color wheel filter change from 0 to 0 04:44:09 FLIGetFilterPos err=0 currentPosition=0 04:44:09 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:09 Filter is already there-color wheel unchanged 04:44:09 Received message from Master: op=Shutter serial=265427 04:44:09 Shutter LASER close 04:44:09 Received message from Camera: op=State serial=265429 04:44:09 GetSingleValue result=40 Value=cccccccc 04:44:09 SkyScan query 04:44:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:44:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:10 Parameters OK 04:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:10 Set A/D data flow result=40 04:44:10 Set A/D channel type result=40 04:44:10 Set A/D encoding result=40 04:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:10 Set channel filter=0.000000e+000 result=40 04:44:10 Config A/D Result=40 04:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:10 Get A/D filter: -9.255963e+061 result=40 04:44:10 Get A/D value=-858993460 result=40 04:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:10 Parameters OK 04:44:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:10 Set A/D data flow result=40 04:44:10 Set A/D channel type result=40 04:44:10 Set A/D encoding result=40 04:44:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:10 Set channel filter=0.000000e+000 result=40 04:44:10 Config A/D Result=40 04:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:10 Get A/D filter: -9.255963e+061 result=40 04:44:10 Get A/D value=-858993460 result=40 04:44:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:10 Aux= 04:44:10 Message to Camera, serial 265429 queued 04:44:47 Received message from Master: op=PointingHead serial=265442 04:44:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:44:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:44:47 Point started: ret=0 04:44:47 point_skyscan result=0 04:44:48 Check angles 04:44:48 SkyScan query 04:44:48 SkyScan query done: ret=0 az=135.69<-9046 ze=-6.51<-12434 Statuses=0009 0008 04:44:48 Msec=0 True Az=135.69 Ze=-6.51 Az status=0009 Ze status=0008 04:44:49 Check angles 04:44:49 SkyScan query 04:44:49 SkyScan query done: ret=0 az=153.57<-10238 ze=-6.495<-12433 Statuses=0009 0008 04:44:49 Msec=750 True Az=153.57 Ze=-6.495 Az status=0009 Ze status=0008 04:44:49 Check angles 04:44:49 SkyScan query 04:44:50 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 04:44:50 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 04:44:50 Check angles 04:44:50 SkyScan query 04:44:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:44:51 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:44:51 Message to Master queued w/err=0: serial=265442 error=0 04:44:56 Received message from Master: op=Filter serial=265443 04:44:56 Color wheel filter change from 0 to 0 04:44:56 FLIGetFilterPos err=0 currentPosition=0 04:44:56 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:56 Filter is already there-color wheel unchanged 04:44:56 Received message from Master: op=Shutter serial=265444 04:44:56 Shutter LASER close 04:44:56 Received message from Camera: op=State serial=265446 04:44:56 GetSingleValue result=40 Value=cccccccc 04:44:56 SkyScan query 04:44:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:44:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:57 Parameters OK 04:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:57 Set A/D data flow result=40 04:44:57 Set A/D channel type result=40 04:44:57 Set A/D encoding result=40 04:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:57 Set channel filter=0.000000e+000 result=40 04:44:57 Config A/D Result=40 04:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:57 Get A/D filter: -9.255963e+061 result=40 04:44:57 Get A/D value=-858993460 result=40 04:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:57 Parameters OK 04:44:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:57 Set A/D data flow result=40 04:44:57 Set A/D channel type result=40 04:44:57 Set A/D encoding result=40 04:44:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:57 Set channel filter=0.000000e+000 result=40 04:44:57 Config A/D Result=40 04:44:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:57 Get A/D filter: -9.255963e+061 result=40 04:44:57 Get A/D value=-858993460 result=40 04:44:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:57 Aux= 04:44:57 Message to Camera, serial 265446 queued 04:45:33 Received message from Master: op=PointingHead serial=265459 04:45:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:45:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:45:34 Point started: ret=0 04:45:34 point_skyscan result=0 04:45:35 Check angles 04:45:35 SkyScan query 04:45:35 SkyScan query done: ret=0 az=152.94<-10196 ze=6.51<-11566 Statuses=0009 0008 04:45:35 Msec=0 True Az=152.94 Ze=6.51 Az status=0009 Ze status=0008 04:45:35 Check angles 04:45:35 SkyScan query 04:45:36 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 04:45:36 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 04:45:36 Check angles 04:45:36 SkyScan query 04:45:37 SkyScan query done: ret=0 az=117.795<-7853 ze=6.495<-11567 Statuses=0009 0008 04:45:37 Msec=1500 True Az=117.795 Ze=6.495 Az status=0009 Ze status=0008 04:45:37 Check angles 04:45:37 SkyScan query 04:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:45:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:45:37 Message to Master queued w/err=0: serial=265459 error=0 04:45:42 Received message from Master: op=Filter serial=265460 04:45:42 Color wheel filter change from 0 to 0 04:45:42 FLIGetFilterPos err=0 currentPosition=0 04:45:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:42 Filter is already there-color wheel unchanged 04:45:43 Received message from Master: op=Shutter serial=265461 04:45:43 Shutter LASER close 04:45:43 Received message from Camera: op=State serial=265463 04:45:43 GetSingleValue result=40 Value=cccccccc 04:45:43 SkyScan query 04:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:45:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:43 Parameters OK 04:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:43 Set A/D data flow result=40 04:45:43 Set A/D channel type result=40 04:45:43 Set A/D encoding result=40 04:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:43 Set channel filter=0.000000e+000 result=40 04:45:43 Config A/D Result=40 04:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:43 Get A/D filter: -9.255963e+061 result=40 04:45:43 Get A/D value=-858993460 result=40 04:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:43 Parameters OK 04:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:43 Set A/D data flow result=40 04:45:43 Set A/D channel type result=40 04:45:43 Set A/D encoding result=40 04:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:43 Set channel filter=0.000000e+000 result=40 04:45:43 Config A/D Result=40 04:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:43 Get A/D filter: -9.255963e+061 result=40 04:45:43 Get A/D value=-858993460 result=40 04:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:43 Aux= 04:45:43 Message to Camera, serial 265463 queued 04:46:20 Received message from Master: op=PointingHead serial=265476 04:46:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:46:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:46:20 Point started: ret=0 04:46:20 point_skyscan result=0 04:46:21 Check angles 04:46:21 SkyScan query 04:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 04:46:22 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 04:46:22 Check angles 04:46:22 SkyScan query 04:46:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 04:46:22 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 04:46:23 Check angles 04:46:23 SkyScan query 04:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 04:46:23 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 04:46:23 Check angles 04:46:23 SkyScan query 04:46:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 04:46:24 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 04:46:24 Check angles 04:46:24 SkyScan query 04:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 04:46:25 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 04:46:25 Check angles 04:46:25 SkyScan query 04:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 04:46:25 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 04:46:26 Check angles 04:46:26 SkyScan query 04:46:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 04:46:26 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 04:46:26 Check angles 04:46:26 SkyScan query 04:46:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 04:46:27 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 04:46:27 Check angles 04:46:27 SkyScan query 04:46:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:46:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:46:28 Message to Master queued w/err=0: serial=265476 error=0 04:46:33 Received message from Master: op=Filter serial=265477 04:46:33 Color wheel filter change from 0 to 0 04:46:33 FLIGetFilterPos err=0 currentPosition=0 04:46:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:33 Filter is already there-color wheel unchanged 04:46:33 Received message from Master: op=Shutter serial=265478 04:46:33 Shutter LASER open 04:46:33 Received message from Camera: op=State serial=265480 04:46:33 GetSingleValue result=40 Value=cccccccc 04:46:33 SkyScan query 04:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:46:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:34 Parameters OK 04:46:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:34 Set A/D data flow result=40 04:46:34 Set A/D channel type result=40 04:46:34 Set A/D encoding result=40 04:46:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:34 Set channel filter=0.000000e+000 result=40 04:46:34 Config A/D Result=40 04:46:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:34 Get A/D filter: -9.255963e+061 result=40 04:46:34 Get A/D value=-858993460 result=40 04:46:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:34 Parameters OK 04:46:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:34 Set A/D data flow result=40 04:46:34 Set A/D channel type result=40 04:46:34 Set A/D encoding result=40 04:46:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:34 Set channel filter=0.000000e+000 result=40 04:46:34 Config A/D Result=40 04:46:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:34 Get A/D filter: -9.255963e+061 result=40 04:46:34 Get A/D value=-858993460 result=40 04:46:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:34 Aux= 04:46:34 Message to Camera, serial 265480 queued 04:46:42 Received message from Master: op=Shutter serial=265490 04:46:42 Shutter LASER close 04:46:43 Received message from Master: op=PointingHead serial=265494 04:46:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:46:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:46:43 Point started: ret=0 04:46:43 point_skyscan result=0 04:46:44 Check angles 04:46:44 SkyScan query 04:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 04:46:44 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 04:46:44 Check angles 04:46:44 SkyScan query 04:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 04:46:45 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 04:46:45 Check angles 04:46:45 SkyScan query 04:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 04:46:46 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 04:46:46 Check angles 04:46:46 SkyScan query 04:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 04:46:46 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 04:46:47 Check angles 04:46:47 SkyScan query 04:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 04:46:47 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 04:46:47 Check angles 04:46:47 SkyScan query 04:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 04:46:48 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 04:46:48 Check angles 04:46:48 SkyScan query 04:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 04:46:49 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 04:46:49 Check angles 04:46:49 SkyScan query 04:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 04:46:49 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 04:46:50 Check angles 04:46:50 SkyScan query 04:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:46:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:46:50 Message to Master queued w/err=0: serial=265494 error=0 04:46:55 Received message from Master: op=Filter serial=265495 04:46:55 Color wheel filter change from 0 to 0 04:46:55 FLIGetFilterPos err=0 currentPosition=0 04:46:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:55 Filter is already there-color wheel unchanged 04:46:55 Received message from Master: op=Shutter serial=265496 04:46:55 Shutter LASER close 04:46:56 Received message from Camera: op=State serial=265498 04:46:56 GetSingleValue result=40 Value=cccccccc 04:46:56 SkyScan query 04:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:46:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:56 Parameters OK 04:46:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:56 Set A/D data flow result=40 04:46:56 Set A/D channel type result=40 04:46:56 Set A/D encoding result=40 04:46:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:56 Set channel filter=0.000000e+000 result=40 04:46:56 Config A/D Result=40 04:46:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:56 Get A/D filter: -9.255963e+061 result=40 04:46:56 Get A/D value=-858993460 result=40 04:46:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:56 Parameters OK 04:46:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:56 Set A/D data flow result=40 04:46:56 Set A/D channel type result=40 04:46:56 Set A/D encoding result=40 04:46:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:56 Set channel filter=0.000000e+000 result=40 04:46:56 Config A/D Result=40 04:46:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:56 Get A/D filter: -9.255963e+061 result=40 04:46:56 Get A/D value=-858993460 result=40 04:46:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:56 Aux= 04:46:56 Message to Camera, serial 265498 queued 04:47:33 Received message from Master: op=PointingHead serial=265511 04:47:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:47:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:47:33 Point started: ret=0 04:47:33 point_skyscan result=0 04:47:34 Check angles 04:47:34 SkyScan query 04:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:47:35 Message to Master queued w/err=0: serial=265511 error=0 04:47:40 Received message from Master: op=Filter serial=265512 04:47:40 Color wheel filter change from 0 to 0 04:47:40 FLIGetFilterPos err=0 currentPosition=0 04:47:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:40 Filter is already there-color wheel unchanged 04:47:40 Received message from Master: op=Shutter serial=265513 04:47:40 Shutter LASER close 04:47:40 Received message from Camera: op=State serial=265515 04:47:40 GetSingleValue result=40 Value=cccccccc 04:47:40 SkyScan query 04:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:47:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:40 Parameters OK 04:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:40 Set A/D data flow result=40 04:47:40 Set A/D channel type result=40 04:47:40 Set A/D encoding result=40 04:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:40 Set channel filter=0.000000e+000 result=40 04:47:40 Config A/D Result=40 04:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:40 Get A/D filter: -9.255963e+061 result=40 04:47:40 Get A/D value=-858993460 result=40 04:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:40 Parameters OK 04:47:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:40 Set A/D data flow result=40 04:47:40 Set A/D channel type result=40 04:47:40 Set A/D encoding result=40 04:47:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:40 Set channel filter=0.000000e+000 result=40 04:47:40 Config A/D Result=40 04:47:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:40 Get A/D filter: -9.255963e+061 result=40 04:47:40 Get A/D value=-858993460 result=40 04:47:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:40 Aux= 04:47:40 Message to Camera, serial 265515 queued 04:48:17 Received message from Master: op=PointingHead serial=265528 04:48:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:48:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:48:18 Point started: ret=0 04:48:18 point_skyscan result=0 04:48:18 Check angles 04:48:18 SkyScan query 04:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:48:19 Message to Master queued w/err=0: serial=265528 error=0 04:48:24 Received message from Master: op=Filter serial=265529 04:48:24 Color wheel filter change from 0 to 0 04:48:24 FLIGetFilterPos err=0 currentPosition=0 04:48:24 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:24 Filter is already there-color wheel unchanged 04:48:24 Received message from Master: op=Shutter serial=265530 04:48:24 Shutter LASER close 04:48:24 Received message from Camera: op=State serial=265532 04:48:24 GetSingleValue result=40 Value=cccccccc 04:48:24 SkyScan query 04:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:48:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:25 Parameters OK 04:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:25 Set A/D data flow result=40 04:48:25 Set A/D channel type result=40 04:48:25 Set A/D encoding result=40 04:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:25 Set channel filter=0.000000e+000 result=40 04:48:25 Config A/D Result=40 04:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:25 Get A/D filter: -9.255963e+061 result=40 04:48:25 Get A/D value=-858993460 result=40 04:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:25 Parameters OK 04:48:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:25 Set A/D data flow result=40 04:48:25 Set A/D channel type result=40 04:48:25 Set A/D encoding result=40 04:48:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:25 Set channel filter=0.000000e+000 result=40 04:48:25 Config A/D Result=40 04:48:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:25 Get A/D filter: -9.255963e+061 result=40 04:48:25 Get A/D value=-858993460 result=40 04:48:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:25 Aux= 04:48:25 Message to Camera, serial 265532 queued 04:49:02 Received message from Master: op=PointingHead serial=265545 04:49:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:49:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:49:02 Point started: ret=0 04:49:02 point_skyscan result=0 04:49:03 Check angles 04:49:03 SkyScan query 04:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:49:03 Message to Master queued w/err=0: serial=265545 error=0 04:49:08 Received message from Master: op=Filter serial=265546 04:49:08 Color wheel filter change from 0 to 0 04:49:08 FLIGetFilterPos err=0 currentPosition=0 04:49:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:08 Filter is already there-color wheel unchanged 04:49:08 Received message from Master: op=Shutter serial=265547 04:49:08 Shutter LASER close 04:49:08 Received message from Camera: op=State serial=265549 04:49:08 GetSingleValue result=40 Value=cccccccc 04:49:08 SkyScan query 04:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:49:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:09 Parameters OK 04:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:09 Set A/D data flow result=40 04:49:09 Set A/D channel type result=40 04:49:09 Set A/D encoding result=40 04:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:09 Set channel filter=0.000000e+000 result=40 04:49:09 Config A/D Result=40 04:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:09 Get A/D filter: -9.255963e+061 result=40 04:49:09 Get A/D value=-858993460 result=40 04:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:09 Parameters OK 04:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:09 Set A/D data flow result=40 04:49:09 Set A/D channel type result=40 04:49:09 Set A/D encoding result=40 04:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:09 Set channel filter=0.000000e+000 result=40 04:49:09 Config A/D Result=40 04:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:09 Get A/D filter: -9.255963e+061 result=40 04:49:09 Get A/D value=-858993460 result=40 04:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:09 Aux= 04:49:09 Message to Camera, serial 265549 queued 04:49:46 Received message from Master: op=PointingHead serial=265562 04:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:49:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:49:46 Point started: ret=0 04:49:46 point_skyscan result=0 04:49:47 Check angles 04:49:47 SkyScan query 04:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 04:49:48 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 04:49:48 Check angles 04:49:48 SkyScan query 04:49:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 04:49:48 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 04:49:48 Check angles 04:49:48 SkyScan query 04:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 04:49:49 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 04:49:49 Check angles 04:49:49 SkyScan query 04:49:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 04:49:50 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 04:49:50 Check angles 04:49:50 SkyScan query 04:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 04:49:51 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 04:49:51 Check angles 04:49:51 SkyScan query 04:49:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.4<-20560 Statuses=0008 0009 04:49:51 Msec=3750 True Az=112.995 Ze=-128.4 Az status=0008 Ze status=0009 04:49:51 Check angles 04:49:51 SkyScan query 04:49:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 04:49:52 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 04:49:52 Check angles 04:49:52 SkyScan query 04:49:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.715<-23381 Statuses=0008 0009 04:49:53 Msec=5250 True Az=112.995 Ze=-170.715 Az status=0008 Ze status=0009 04:49:53 Check angles 04:49:53 SkyScan query 04:49:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:49:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:49:54 Message to Master queued w/err=0: serial=265562 error=0 04:49:59 Received message from Master: op=Filter serial=265563 04:49:59 Color wheel filter change from 0 to 0 04:49:59 FLIGetFilterPos err=0 currentPosition=0 04:49:59 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:59 Filter is already there-color wheel unchanged 04:49:59 Received message from Master: op=Shutter serial=265564 04:49:59 Shutter LASER open 04:49:59 Received message from Camera: op=State serial=265566 04:49:59 GetSingleValue result=40 Value=cccccccc 04:49:59 SkyScan query 04:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:50:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:00 Parameters OK 04:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:00 Set A/D data flow result=40 04:50:00 Set A/D channel type result=40 04:50:00 Set A/D encoding result=40 04:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:00 Set channel filter=0.000000e+000 result=40 04:50:00 Config A/D Result=40 04:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:00 Get A/D filter: -9.255963e+061 result=40 04:50:00 Get A/D value=-858993460 result=40 04:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:00 Parameters OK 04:50:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:00 Set A/D data flow result=40 04:50:00 Set A/D channel type result=40 04:50:00 Set A/D encoding result=40 04:50:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:00 Set channel filter=0.000000e+000 result=40 04:50:00 Config A/D Result=40 04:50:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:00 Get A/D filter: -9.255963e+061 result=40 04:50:00 Get A/D value=-858993460 result=40 04:50:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:00 Aux= 04:50:00 Message to Camera, serial 265566 queued 04:50:08 Received message from Master: op=Shutter serial=265576 04:50:08 Shutter LASER close 04:50:09 Received message from Master: op=PointingHead serial=265580 04:50:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:09 Point started: ret=0 04:50:09 point_skyscan result=0 04:50:10 Check angles 04:50:10 SkyScan query 04:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.565<-21571 Statuses=0008 0009 04:50:10 Msec=0 True Az=112.995 Ze=-143.565 Az status=0008 Ze status=0009 04:50:10 Check angles 04:50:10 SkyScan query 04:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 04:50:11 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 04:50:11 Check angles 04:50:11 SkyScan query 04:50:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 04:50:12 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 04:50:12 Check angles 04:50:12 SkyScan query 04:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 04:50:13 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 04:50:13 Check angles 04:50:13 SkyScan query 04:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.38<-15892 Statuses=0008 0009 04:50:13 Msec=3000 True Az=112.995 Ze=-58.38 Az status=0008 Ze status=0009 04:50:14 Check angles 04:50:14 SkyScan query 04:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.035<-14469 Statuses=0008 0009 04:50:14 Msec=3750 True Az=112.995 Ze=-37.035 Az status=0008 Ze status=0009 04:50:14 Check angles 04:50:14 SkyScan query 04:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.615<-13041 Statuses=0008 0009 04:50:15 Msec=4500 True Az=112.995 Ze=-15.615 Az status=0008 Ze status=0009 04:50:15 Check angles 04:50:15 SkyScan query 04:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=5.025<-11665 Statuses=0008 0009 04:50:16 Msec=5250 True Az=112.995 Ze=5.025 Az status=0008 Ze status=0009 04:50:16 Check angles 04:50:16 SkyScan query 04:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:50:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:50:16 Message to Master queued w/err=0: serial=265580 error=0 04:50:21 Received message from Master: op=Filter serial=265581 04:50:21 Color wheel filter change from 0 to 0 04:50:21 FLIGetFilterPos err=0 currentPosition=0 04:50:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:21 Filter is already there-color wheel unchanged 04:50:22 Received message from Master: op=Shutter serial=265582 04:50:22 Shutter LASER close 04:50:22 Received message from Camera: op=State serial=265584 04:50:22 GetSingleValue result=40 Value=cccccccc 04:50:22 SkyScan query 04:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:50:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:22 Parameters OK 04:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:22 Set A/D data flow result=40 04:50:22 Set A/D channel type result=40 04:50:22 Set A/D encoding result=40 04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:22 Set channel filter=0.000000e+000 result=40 04:50:22 Config A/D Result=40 04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:22 Get A/D filter: -9.255963e+061 result=40 04:50:22 Get A/D value=-858993460 result=40 04:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:22 Parameters OK 04:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:22 Set A/D data flow result=40 04:50:22 Set A/D channel type result=40 04:50:22 Set A/D encoding result=40 04:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:22 Set channel filter=0.000000e+000 result=40 04:50:22 Config A/D Result=40 04:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:22 Get A/D filter: -9.255963e+061 result=40 04:50:22 Get A/D value=-858993460 result=40 04:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:22 Aux= 04:50:22 Message to Camera, serial 265584 queued 04:50:59 Received message from Master: op=PointingHead serial=265597 04:50:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:50:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:50:59 Point started: ret=0 04:50:59 point_skyscan result=0 04:51:00 Check angles 04:51:00 SkyScan query 04:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:51:01 Message to Master queued w/err=0: serial=265597 error=0 04:51:06 Received message from Master: op=Filter serial=265598 04:51:06 Color wheel filter change from 0 to 0 04:51:06 FLIGetFilterPos err=0 currentPosition=0 04:51:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:06 Filter is already there-color wheel unchanged 04:51:06 Received message from Master: op=Shutter serial=265599 04:51:06 Shutter LASER close 04:51:06 Received message from Camera: op=State serial=265601 04:51:06 GetSingleValue result=40 Value=cccccccc 04:51:06 SkyScan query 04:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:51:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:07 Parameters OK 04:51:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:07 Set A/D data flow result=40 04:51:07 Set A/D channel type result=40 04:51:07 Set A/D encoding result=40 04:51:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:07 Set channel filter=0.000000e+000 result=40 04:51:07 Config A/D Result=40 04:51:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:07 Get A/D filter: -9.255963e+061 result=40 04:51:07 Get A/D value=-858993460 result=40 04:51:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:07 Parameters OK 04:51:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:07 Set A/D data flow result=40 04:51:07 Set A/D channel type result=40 04:51:07 Set A/D encoding result=40 04:51:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:07 Set channel filter=0.000000e+000 result=40 04:51:07 Config A/D Result=40 04:51:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:07 Get A/D filter: -9.255963e+061 result=40 04:51:07 Get A/D value=-858993460 result=40 04:51:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:07 Aux= 04:51:07 Message to Camera, serial 265601 queued 04:51:43 Received message from Master: op=PointingHead serial=265614 04:51:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:51:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:51:44 Point started: ret=0 04:51:44 point_skyscan result=0 04:51:45 Check angles 04:51:45 SkyScan query 04:51:45 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 04:51:45 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 04:51:45 Check angles 04:51:45 SkyScan query 04:51:46 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 04:51:46 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 04:51:46 Check angles 04:51:46 SkyScan query 04:51:47 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 04:51:47 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 04:51:47 Check angles 04:51:47 SkyScan query 04:51:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:51:47 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:51:47 Message to Master queued w/err=0: serial=265614 error=0 04:51:52 Received message from Master: op=Filter serial=265615 04:51:52 Color wheel filter change from 0 to 0 04:51:52 FLIGetFilterPos err=0 currentPosition=0 04:51:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:52 Filter is already there-color wheel unchanged 04:51:53 Received message from Master: op=Shutter serial=265616 04:51:53 Shutter LASER close 04:51:53 Received message from Camera: op=State serial=265618 04:51:53 GetSingleValue result=40 Value=cccccccc 04:51:53 SkyScan query 04:51:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:53 Parameters OK 04:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:53 Set A/D data flow result=40 04:51:53 Set A/D channel type result=40 04:51:53 Set A/D encoding result=40 04:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:53 Set channel filter=0.000000e+000 result=40 04:51:53 Config A/D Result=40 04:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:53 Get A/D filter: -9.255963e+061 result=40 04:51:53 Get A/D value=-858993460 result=40 04:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:53 Parameters OK 04:51:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:53 Set A/D data flow result=40 04:51:53 Set A/D channel type result=40 04:51:53 Set A/D encoding result=40 04:51:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:53 Set channel filter=0.000000e+000 result=40 04:51:53 Config A/D Result=40 04:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:53 Get A/D filter: -9.255963e+061 result=40 04:51:53 Get A/D value=-858993460 result=40 04:51:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:53 Aux= 04:51:53 Message to Camera, serial 265618 queued 04:52:30 Received message from Master: op=PointingHead serial=265631 04:52:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:52:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:52:30 Point started: ret=0 04:52:30 point_skyscan result=0 04:52:31 Check angles 04:52:31 SkyScan query 04:52:32 SkyScan query done: ret=0 az=152.685<-10179 ze=6.51<-11566 Statuses=0009 0008 04:52:32 Msec=0 True Az=152.685 Ze=6.51 Az status=0009 Ze status=0008 04:52:32 Check angles 04:52:32 SkyScan query 04:52:32 SkyScan query done: ret=0 az=134.745<-8983 ze=6.495<-11567 Statuses=0009 0008 04:52:32 Msec=750 True Az=134.745 Ze=6.495 Az status=0009 Ze status=0008 04:52:33 Check angles 04:52:33 SkyScan query 04:52:33 SkyScan query done: ret=0 az=117.375<-7825 ze=6.495<-11567 Statuses=0009 0008 04:52:33 Msec=1500 True Az=117.375 Ze=6.495 Az status=0009 Ze status=0008 04:52:33 Check angles 04:52:33 SkyScan query 04:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:52:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:52:34 Message to Master queued w/err=0: serial=265631 error=0 04:52:39 Received message from Master: op=Filter serial=265632 04:52:39 Color wheel filter change from 0 to 0 04:52:39 FLIGetFilterPos err=0 currentPosition=0 04:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:39 Filter is already there-color wheel unchanged 04:52:39 Received message from Master: op=Shutter serial=265633 04:52:39 Shutter LASER close 04:52:39 Received message from Camera: op=State serial=265635 04:52:39 GetSingleValue result=40 Value=cccccccc 04:52:39 SkyScan query 04:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:40 Parameters OK 04:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:40 Set A/D data flow result=40 04:52:40 Set A/D channel type result=40 04:52:40 Set A/D encoding result=40 04:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:40 Set channel filter=0.000000e+000 result=40 04:52:40 Config A/D Result=40 04:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:40 Get A/D filter: -9.255963e+061 result=40 04:52:40 Get A/D value=-858993460 result=40 04:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:40 Parameters OK 04:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:40 Set A/D data flow result=40 04:52:40 Set A/D channel type result=40 04:52:40 Set A/D encoding result=40 04:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:40 Set channel filter=0.000000e+000 result=40 04:52:40 Config A/D Result=40 04:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:40 Get A/D filter: -9.255963e+061 result=40 04:52:40 Get A/D value=-858993460 result=40 04:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:40 Aux= 04:52:40 Message to Camera, serial 265635 queued 04:53:17 Received message from Master: op=PointingHead serial=265648 04:53:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:53:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:53:17 Point started: ret=0 04:53:17 point_skyscan result=0 04:53:18 Check angles 04:53:18 SkyScan query 04:53:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 04:53:18 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 04:53:18 Check angles 04:53:18 SkyScan query 04:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 04:53:19 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 04:53:19 Check angles 04:53:19 SkyScan query 04:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 04:53:20 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 04:53:20 Check angles 04:53:20 SkyScan query 04:53:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 04:53:20 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 04:53:21 Check angles 04:53:21 SkyScan query 04:53:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.22<-19148 Statuses=0008 0009 04:53:21 Msec=3000 True Az=112.995 Ze=-107.22 Az status=0008 Ze status=0009 04:53:21 Check angles 04:53:21 SkyScan query 04:53:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.16<-20544 Statuses=0008 0009 04:53:22 Msec=3750 True Az=112.995 Ze=-128.16 Az status=0008 Ze status=0009 04:53:22 Check angles 04:53:22 SkyScan query 04:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.13<-21942 Statuses=0008 0009 04:53:23 Msec=4500 True Az=112.995 Ze=-149.13 Az status=0008 Ze status=0009 04:53:23 Check angles 04:53:23 SkyScan query 04:53:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.07<-23338 Statuses=0008 0009 04:53:23 Msec=5250 True Az=112.995 Ze=-170.07 Az status=0008 Ze status=0009 04:53:24 Check angles 04:53:24 SkyScan query 04:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:53:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:53:24 Message to Master queued w/err=0: serial=265648 error=0 04:53:29 Received message from Master: op=Filter serial=265649 04:53:29 Color wheel filter change from 0 to 0 04:53:29 FLIGetFilterPos err=0 currentPosition=0 04:53:29 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:29 Filter is already there-color wheel unchanged 04:53:29 Received message from Master: op=Shutter serial=265650 04:53:29 Shutter LASER open 04:53:30 Received message from Camera: op=State serial=265652 04:53:30 GetSingleValue result=40 Value=cccccccc 04:53:30 SkyScan query 04:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:30 Parameters OK 04:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:30 Set A/D data flow result=40 04:53:30 Set A/D channel type result=40 04:53:30 Set A/D encoding result=40 04:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:30 Set channel filter=0.000000e+000 result=40 04:53:30 Config A/D Result=40 04:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:30 Get A/D filter: -9.255963e+061 result=40 04:53:30 Get A/D value=-858993460 result=40 04:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:30 Parameters OK 04:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:30 Set A/D data flow result=40 04:53:30 Set A/D channel type result=40 04:53:30 Set A/D encoding result=40 04:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:30 Set channel filter=0.000000e+000 result=40 04:53:30 Config A/D Result=40 04:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:30 Get A/D filter: -9.255963e+061 result=40 04:53:30 Get A/D value=-858993460 result=40 04:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:30 Aux= 04:53:30 Message to Camera, serial 265652 queued 04:53:39 Received message from Master: op=Shutter serial=265662 04:53:39 Shutter LASER close 04:53:39 Received message from Master: op=PointingHead serial=265666 04:53:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:53:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:53:39 Point started: ret=0 04:53:39 point_skyscan result=0 04:53:40 Check angles 04:53:40 SkyScan query 04:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 04:53:41 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 04:53:41 Check angles 04:53:41 SkyScan query 04:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 04:53:41 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 04:53:42 Check angles 04:53:42 SkyScan query 04:53:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.34<-18756 Statuses=0008 0009 04:53:42 Msec=1500 True Az=112.995 Ze=-101.34 Az status=0008 Ze status=0009 04:53:42 Check angles 04:53:42 SkyScan query 04:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 04:53:43 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 04:53:43 Check angles 04:53:43 SkyScan query 04:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 04:53:44 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 04:53:44 Check angles 04:53:44 SkyScan query 04:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 04:53:44 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 04:53:45 Check angles 04:53:45 SkyScan query 04:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 04:53:45 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 04:53:45 Check angles 04:53:45 SkyScan query 04:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 04:53:46 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 04:53:46 Check angles 04:53:46 SkyScan query 04:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:53:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:53:47 Message to Master queued w/err=0: serial=265666 error=0 04:53:52 Received message from Master: op=Filter serial=265667 04:53:52 Color wheel filter change from 0 to 0 04:53:52 FLIGetFilterPos err=0 currentPosition=0 04:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:52 Filter is already there-color wheel unchanged 04:53:52 Received message from Master: op=Shutter serial=265668 04:53:52 Shutter LASER close 04:53:52 Received message from Camera: op=State serial=265670 04:53:52 GetSingleValue result=40 Value=cccccccc 04:53:52 SkyScan query 04:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:53 Parameters OK 04:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:53 Set A/D data flow result=40 04:53:53 Set A/D channel type result=40 04:53:53 Set A/D encoding result=40 04:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:53 Set channel filter=0.000000e+000 result=40 04:53:53 Config A/D Result=40 04:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:53 Get A/D filter: -9.255963e+061 result=40 04:53:53 Get A/D value=-858993460 result=40 04:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:53 Parameters OK 04:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:53 Set A/D data flow result=40 04:53:53 Set A/D channel type result=40 [UTC 2019-3-14 04:53:53] 04:53:53 Set A/D encoding result=40 04:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:53 Set channel filter=0.000000e+000 result=40 04:53:53 Config A/D Result=40 04:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:53 Get A/D filter: -9.255963e+061 result=40 04:53:53 Get A/D value=-858993460 result=40 04:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:53 Aux= 04:53:53 Message to Camera, serial 265670 queued 04:54:30 Received message from Master: op=PointingHead serial=265683 04:54:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:54:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:54:30 Point started: ret=0 04:54:30 point_skyscan result=0 04:54:31 Check angles 04:54:31 SkyScan query 04:54:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:54:31 Message to Master queued w/err=0: serial=265683 error=0 04:54:36 Received message from Master: op=Filter serial=265684 04:54:36 Color wheel filter change from 0 to 0 04:54:36 FLIGetFilterPos err=0 currentPosition=0 04:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:36 Filter is already there-color wheel unchanged 04:54:36 Received message from Master: op=Shutter serial=265685 04:54:36 Shutter LASER close 04:54:37 Received message from Camera: op=State serial=265687 04:54:37 GetSingleValue result=40 Value=cccccccc 04:54:37 SkyScan query 04:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:37 Parameters OK 04:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:37 Set A/D data flow result=40 04:54:37 Set A/D channel type result=40 04:54:37 Set A/D encoding result=40 04:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:37 Set channel filter=0.000000e+000 result=40 04:54:37 Config A/D Result=40 04:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:37 Get A/D filter: -9.255963e+061 result=40 04:54:37 Get A/D value=-858993460 result=40 04:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:37 Parameters OK 04:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:37 Set A/D data flow result=40 04:54:37 Set A/D channel type result=40 04:54:37 Set A/D encoding result=40 04:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:37 Set channel filter=0.000000e+000 result=40 04:54:37 Config A/D Result=40 04:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:37 Get A/D filter: -9.255963e+061 result=40 04:54:37 Get A/D value=-858993460 result=40 04:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:37 Aux= 04:54:37 Message to Camera, serial 265687 queued 04:55:14 Received message from Master: op=PointingHead serial=265700 04:55:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:55:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:55:14 Point started: ret=0 04:55:14 point_skyscan result=0 04:55:15 Check angles 04:55:15 SkyScan query 04:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:55:16 Message to Master queued w/err=0: serial=265700 error=0 04:55:21 Received message from Master: op=Filter serial=265701 04:55:21 Color wheel filter change from 0 to 0 04:55:21 FLIGetFilterPos err=0 currentPosition=0 04:55:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:21 Filter is already there-color wheel unchanged 04:55:21 Received message from Master: op=Shutter serial=265702 04:55:21 Shutter LASER close 04:55:21 Received message from Camera: op=State serial=265704 04:55:21 GetSingleValue result=40 Value=cccccccc 04:55:21 SkyScan query 04:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:55:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:21 Parameters OK 04:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:21 Set A/D data flow result=40 04:55:21 Set A/D channel type result=40 04:55:21 Set A/D encoding result=40 04:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:21 Set channel filter=0.000000e+000 result=40 04:55:21 Config A/D Result=40 04:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:21 Get A/D filter: -9.255963e+061 result=40 04:55:21 Get A/D value=-858993460 result=40 04:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:21 Parameters OK 04:55:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:21 Set A/D data flow result=40 04:55:21 Set A/D channel type result=40 04:55:21 Set A/D encoding result=40 04:55:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:21 Set channel filter=0.000000e+000 result=40 04:55:21 Config A/D Result=40 04:55:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:21 Get A/D filter: -9.255963e+061 result=40 04:55:21 Get A/D value=-858993460 result=40 04:55:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:21 Aux= 04:55:21 Message to Camera, serial 265704 queued 04:55:58 Received message from Master: op=PointingHead serial=265717 04:55:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:55:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:55:59 Point started: ret=0 04:55:59 point_skyscan result=0 04:55:59 Check angles 04:55:59 SkyScan query 04:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:56:00 Message to Master queued w/err=0: serial=265717 error=0 04:56:05 Received message from Master: op=Filter serial=265718 04:56:05 Color wheel filter change from 0 to 0 04:56:05 FLIGetFilterPos err=0 currentPosition=0 04:56:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:05 Filter is already there-color wheel unchanged 04:56:05 Received message from Master: op=Shutter serial=265719 04:56:05 Shutter LASER close 04:56:05 Received message from Camera: op=State serial=265721 04:56:05 GetSingleValue result=40 Value=cccccccc 04:56:05 SkyScan query 04:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:06 Parameters OK 04:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:06 Set A/D data flow result=40 04:56:06 Set A/D channel type result=40 04:56:06 Set A/D encoding result=40 04:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:06 Set channel filter=0.000000e+000 result=40 04:56:06 Config A/D Result=40 04:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:06 Get A/D filter: -9.255963e+061 result=40 04:56:06 Get A/D value=-858993460 result=40 04:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:06 Parameters OK 04:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:06 Set A/D data flow result=40 04:56:06 Set A/D channel type result=40 04:56:06 Set A/D encoding result=40 04:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:06 Set channel filter=0.000000e+000 result=40 04:56:06 Config A/D Result=40 04:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:06 Get A/D filter: -9.255963e+061 result=40 04:56:06 Get A/D value=-858993460 result=40 04:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:06 Aux= 04:56:06 Message to Camera, serial 265721 queued 04:56:43 Received message from Master: op=PointingHead serial=265734 04:56:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:56:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:56:43 Point started: ret=0 04:56:43 point_skyscan result=0 04:56:44 Check angles 04:56:44 SkyScan query 04:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 04:56:44 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 04:56:44 Check angles 04:56:44 SkyScan query 04:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 04:56:45 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 04:56:45 Check angles 04:56:45 SkyScan query 04:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 04:56:46 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 04:56:46 Check angles 04:56:46 SkyScan query 04:56:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 04:56:46 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 04:56:47 Check angles 04:56:47 SkyScan query 04:56:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 04:56:47 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 04:56:47 Check angles 04:56:47 SkyScan query 04:56:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 04:56:48 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 04:56:48 Check angles 04:56:48 SkyScan query 04:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 04:56:49 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 04:56:49 Check angles 04:56:49 SkyScan query 04:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.475<-23365 Statuses=0008 0009 04:56:49 Msec=5250 True Az=112.995 Ze=-170.475 Az status=0008 Ze status=0009 04:56:50 Check angles 04:56:50 SkyScan query 04:56:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:56:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:56:50 Message to Master queued w/err=0: serial=265734 error=0 04:56:55 Received message from Master: op=Filter serial=265735 04:56:55 Color wheel filter change from 0 to 0 04:56:55 FLIGetFilterPos err=0 currentPosition=0 04:56:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:55 Filter is already there-color wheel unchanged 04:56:55 Received message from Master: op=Shutter serial=265736 04:56:55 Shutter LASER open 04:56:56 Received message from Camera: op=State serial=265738 04:56:56 GetSingleValue result=40 Value=cccccccc 04:56:56 SkyScan query 04:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:56:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:56 Parameters OK 04:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:56 Set A/D data flow result=40 04:56:56 Set A/D channel type result=40 04:56:56 Set A/D encoding result=40 04:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:56 Set channel filter=0.000000e+000 result=40 04:56:56 Config A/D Result=40 04:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:56 Get A/D filter: -9.255963e+061 result=40 04:56:56 Get A/D value=-858993460 result=40 04:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:56 Parameters OK 04:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:56 Set A/D data flow result=40 04:56:56 Set A/D channel type result=40 04:56:56 Set A/D encoding result=40 04:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:56 Set channel filter=0.000000e+000 result=40 04:56:56 Config A/D Result=40 04:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:56 Get A/D filter: -9.255963e+061 result=40 04:56:56 Get A/D value=-858993460 result=40 04:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:56 Aux= 04:56:56 Message to Camera, serial 265738 queued 04:57:05 Received message from Master: op=Shutter serial=265748 04:57:05 Shutter LASER close 04:57:05 Received message from Master: op=PointingHead serial=265752 04:57:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:06 Point started: ret=0 04:57:06 point_skyscan result=0 04:57:06 Check angles 04:57:06 SkyScan query 04:57:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 04:57:07 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 04:57:07 Check angles 04:57:07 SkyScan query 04:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 04:57:08 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 04:57:08 Check angles 04:57:08 SkyScan query 04:57:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.28<-18752 Statuses=0008 0009 04:57:08 Msec=1500 True Az=112.995 Ze=-101.28 Az status=0008 Ze status=0009 04:57:09 Check angles 04:57:09 SkyScan query 04:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 04:57:09 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 04:57:09 Check angles 04:57:09 SkyScan query 04:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.37<-15958 Statuses=0008 0009 04:57:10 Msec=3000 True Az=112.995 Ze=-59.37 Az status=0008 Ze status=0009 04:57:10 Check angles 04:57:10 SkyScan query 04:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.4<-14560 Statuses=0008 0009 04:57:11 Msec=3750 True Az=112.995 Ze=-38.4 Az status=0008 Ze status=0009 04:57:11 Check angles 04:57:11 SkyScan query 04:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.475<-13165 Statuses=0008 0009 04:57:11 Msec=4500 True Az=112.995 Ze=-17.475 Az status=0008 Ze status=0009 04:57:12 Check angles 04:57:12 SkyScan query 04:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=3.51<-11766 Statuses=0008 0009 04:57:12 Msec=5250 True Az=112.995 Ze=3.51 Az status=0008 Ze status=0009 04:57:12 Check angles 04:57:12 SkyScan query 04:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 04:57:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 04:57:13 Message to Master queued w/err=0: serial=265752 error=0 04:57:18 Received message from Master: op=Filter serial=265753 04:57:18 Color wheel filter change from 0 to 0 04:57:18 FLIGetFilterPos err=0 currentPosition=0 04:57:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:18 Filter is already there-color wheel unchanged 04:57:18 Received message from Master: op=Shutter serial=265754 04:57:18 Shutter LASER close 04:57:18 Received message from Camera: op=State serial=265756 04:57:18 GetSingleValue result=40 Value=cccccccc 04:57:18 SkyScan query 04:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:19 Parameters OK 04:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:19 Set A/D data flow result=40 04:57:19 Set A/D channel type result=40 04:57:19 Set A/D encoding result=40 04:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:19 Set channel filter=0.000000e+000 result=40 04:57:19 Config A/D Result=40 04:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:19 Get A/D filter: -9.255963e+061 result=40 04:57:19 Get A/D value=-858993460 result=40 04:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:19 Parameters OK 04:57:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:19 Set A/D data flow result=40 04:57:19 Set A/D channel type result=40 04:57:19 Set A/D encoding result=40 04:57:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:19 Set channel filter=0.000000e+000 result=40 04:57:19 Config A/D Result=40 04:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:19 Get A/D filter: -9.255963e+061 result=40 04:57:19 Get A/D value=-858993460 result=40 04:57:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:19 Aux= 04:57:19 Message to Camera, serial 265756 queued 04:57:56 Received message from Master: op=PointingHead serial=265769 04:57:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:57:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:57:56 Point started: ret=0 04:57:56 point_skyscan result=0 04:57:57 Check angles 04:57:57 SkyScan query 04:57:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:57:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:57:57 Message to Master queued w/err=0: serial=265769 error=0 04:58:02 Received message from Master: op=Filter serial=265770 04:58:02 Color wheel filter change from 0 to 0 04:58:02 FLIGetFilterPos err=0 currentPosition=0 04:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:02 Filter is already there-color wheel unchanged 04:58:02 Received message from Master: op=Shutter serial=265771 04:58:02 Shutter LASER close 04:58:03 Received message from Camera: op=State serial=265773 04:58:03 GetSingleValue result=40 Value=cccccccc 04:58:03 SkyScan query 04:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:58:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:03 Parameters OK 04:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:03 Set A/D data flow result=40 04:58:03 Set A/D channel type result=40 04:58:03 Set A/D encoding result=40 04:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:03 Set channel filter=0.000000e+000 result=40 04:58:03 Config A/D Result=40 04:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:03 Get A/D filter: -9.255963e+061 result=40 04:58:03 Get A/D value=-858993460 result=40 04:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:03 Parameters OK 04:58:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:03 Set A/D data flow result=40 04:58:03 Set A/D channel type result=40 04:58:03 Set A/D encoding result=40 04:58:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:03 Set channel filter=0.000000e+000 result=40 04:58:03 Config A/D Result=40 04:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:03 Get A/D filter: -9.255963e+061 result=40 04:58:03 Get A/D value=-858993460 result=40 04:58:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:03 Aux= 04:58:03 Message to Camera, serial 265773 queued 04:58:40 Received message from Master: op=PointingHead serial=265786 04:58:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 04:58:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 04:58:40 Point started: ret=0 04:58:40 point_skyscan result=0 04:58:41 Check angles 04:58:41 SkyScan query 04:58:42 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 04:58:42 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 04:58:42 Check angles 04:58:42 SkyScan query 04:58:42 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 04:58:42 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 04:58:43 Check angles 04:58:43 SkyScan query 04:58:43 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 04:58:43 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 04:58:43 Check angles 04:58:43 SkyScan query 04:58:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 04:58:44 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 04:58:44 Message to Master queued w/err=0: serial=265786 error=0 04:58:49 Received message from Master: op=Filter serial=265787 04:58:49 Color wheel filter change from 0 to 0 04:58:49 FLIGetFilterPos err=0 currentPosition=0 04:58:49 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:49 Filter is already there-color wheel unchanged 04:58:49 Received message from Master: op=Shutter serial=265788 04:58:49 Shutter LASER close 04:58:49 Received message from Camera: op=State serial=265790 04:58:49 GetSingleValue result=40 Value=cccccccc 04:58:49 SkyScan query 04:58:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 04:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:50 Parameters OK 04:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:50 Set A/D data flow result=40 04:58:50 Set A/D channel type result=40 04:58:50 Set A/D encoding result=40 04:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:50 Set channel filter=0.000000e+000 result=40 04:58:50 Config A/D Result=40 04:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:50 Get A/D filter: -9.255963e+061 result=40 04:58:50 Get A/D value=-858993460 result=40 04:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:50 Parameters OK 04:58:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:50 Set A/D data flow result=40 04:58:50 Set A/D channel type result=40 04:58:50 Set A/D encoding result=40 04:58:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:50 Set channel filter=0.000000e+000 result=40 04:58:50 Config A/D Result=40 04:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:50 Get A/D filter: -9.255963e+061 result=40 04:58:50 Get A/D value=-858993460 result=40 04:58:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:50 Aux= 04:58:50 Message to Camera, serial 265790 queued 04:59:27 Received message from Master: op=PointingHead serial=265803 04:59:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 04:59:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 04:59:27 Point started: ret=0 04:59:27 point_skyscan result=0 04:59:28 Check angles 04:59:28 SkyScan query 04:59:28 SkyScan query done: ret=0 az=152.94<-10196 ze=6.51<-11566 Statuses=0009 0008 04:59:28 Msec=0 True Az=152.94 Ze=6.51 Az status=0009 Ze status=0008 04:59:28 Check angles 04:59:28 SkyScan query 04:59:29 SkyScan query done: ret=0 az=135.51<-9034 ze=6.495<-11567 Statuses=0009 0008 04:59:29 Msec=750 True Az=135.51 Ze=6.495 Az status=0009 Ze status=0008 04:59:29 Check angles 04:59:29 SkyScan query 04:59:30 SkyScan query done: ret=0 az=118.08<-7872 ze=6.495<-11567 Statuses=0009 0008 04:59:30 Msec=1500 True Az=118.08 Ze=6.495 Az status=0009 Ze status=0008 04:59:30 Check angles 04:59:30 SkyScan query 04:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 04:59:30 Message to Master queued w/err=0: serial=265803 error=0 04:59:35 Received message from Master: op=Filter serial=265804 04:59:35 Color wheel filter change from 0 to 0 04:59:35 FLIGetFilterPos err=0 currentPosition=0 04:59:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:35 Filter is already there-color wheel unchanged 04:59:36 Received message from Master: op=Shutter serial=265805 04:59:36 Shutter LASER close 04:59:36 Received message from Camera: op=State serial=265807 04:59:36 GetSingleValue result=40 Value=cccccccc 04:59:36 SkyScan query 04:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 04:59:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:36 Parameters OK 04:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:36 Set A/D data flow result=40 04:59:36 Set A/D channel type result=40 04:59:36 Set A/D encoding result=40 04:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:36 Set channel filter=0.000000e+000 result=40 04:59:36 Config A/D Result=40 04:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:36 Get A/D filter: -9.255963e+061 result=40 04:59:36 Get A/D value=-858993460 result=40 04:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:36 Parameters OK 04:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:36 Set A/D data flow result=40 04:59:36 Set A/D channel type result=40 04:59:36 Set A/D encoding result=40 04:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:36 Set channel filter=0.000000e+000 result=40 04:59:36 Config A/D Result=40 04:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:36 Get A/D filter: -9.255963e+061 result=40 04:59:36 Get A/D value=-858993460 result=40 04:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:36 Aux= 04:59:36 Message to Camera, serial 265807 queued 05:00:13 Received message from Master: op=PointingHead serial=265820 05:00:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:00:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:00:13 Point started: ret=0 05:00:13 point_skyscan result=0 05:00:14 Check angles 05:00:14 SkyScan query 05:00:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 05:00:15 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 05:00:15 Check angles 05:00:15 SkyScan query 05:00:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 05:00:16 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 05:00:16 Check angles 05:00:16 SkyScan query 05:00:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 05:00:16 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 05:00:16 Check angles 05:00:16 SkyScan query 05:00:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 05:00:17 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 05:00:17 Check angles 05:00:17 SkyScan query 05:00:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.16<-19144 Statuses=0008 0009 05:00:18 Msec=3000 True Az=112.995 Ze=-107.16 Az status=0008 Ze status=0009 05:00:18 Check angles 05:00:18 SkyScan query 05:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 05:00:19 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 05:00:19 Check angles 05:00:19 SkyScan query 05:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.055<-21937 Statuses=0008 0009 05:00:19 Msec=4500 True Az=112.995 Ze=-149.055 Az status=0008 Ze status=0009 05:00:19 Check angles 05:00:19 SkyScan query 05:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 05:00:20 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 05:00:20 Check angles 05:00:20 SkyScan query 05:00:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:00:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:00:21 Message to Master queued w/err=0: serial=265820 error=0 05:00:26 Received message from Master: op=Filter serial=265821 05:00:26 Color wheel filter change from 0 to 0 05:00:26 FLIGetFilterPos err=0 currentPosition=0 05:00:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:26 Filter is already there-color wheel unchanged 05:00:26 Received message from Master: op=Shutter serial=265822 05:00:26 Shutter LASER open 05:00:26 Received message from Camera: op=State serial=265824 05:00:26 GetSingleValue result=40 Value=cccccccc 05:00:26 SkyScan query 05:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:27 Parameters OK 05:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:27 Set A/D data flow result=40 05:00:27 Set A/D channel type result=40 05:00:27 Set A/D encoding result=40 05:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:27 Set channel filter=0.000000e+000 result=40 05:00:27 Config A/D Result=40 05:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:27 Get A/D filter: -9.255963e+061 result=40 05:00:27 Get A/D value=-858993460 result=40 05:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:27 Parameters OK 05:00:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:27 Set A/D data flow result=40 05:00:27 Set A/D channel type result=40 05:00:27 Set A/D encoding result=40 05:00:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:27 Set channel filter=0.000000e+000 result=40 05:00:27 Config A/D Result=40 05:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:27 Get A/D filter: -9.255963e+061 result=40 05:00:27 Get A/D value=-858993460 result=40 05:00:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:27 Aux= 05:00:27 Message to Camera, serial 265824 queued 05:00:35 Received message from Master: op=Shutter serial=265834 05:00:35 Shutter LASER close 05:00:36 Received message from Master: op=PointingHead serial=265838 05:00:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:00:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:00:36 Point started: ret=0 05:00:36 point_skyscan result=0 05:00:37 Check angles 05:00:37 SkyScan query 05:00:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.325<-21555 Statuses=0008 0009 05:00:37 Msec=0 True Az=112.995 Ze=-143.325 Az status=0008 Ze status=0009 05:00:37 Check angles 05:00:37 SkyScan query 05:00:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.385<-20159 Statuses=0008 0009 05:00:38 Msec=750 True Az=112.995 Ze=-122.385 Az status=0008 Ze status=0009 05:00:38 Check angles 05:00:38 SkyScan query 05:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.415<-18761 Statuses=0008 0009 05:00:39 Msec=1500 True Az=112.995 Ze=-101.415 Az status=0008 Ze status=0009 05:00:39 Check angles 05:00:39 SkyScan query 05:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.445<-17363 Statuses=0008 0009 05:00:39 Msec=2250 True Az=112.995 Ze=-80.445 Az status=0008 Ze status=0009 05:00:40 Check angles 05:00:40 SkyScan query 05:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.505<-15967 Statuses=0008 0009 05:00:40 Msec=3000 True Az=112.995 Ze=-59.505 Az status=0008 Ze status=0009 05:00:40 Check angles 05:00:40 SkyScan query 05:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.535<-14569 Statuses=0008 0009 05:00:41 Msec=3750 True Az=112.995 Ze=-38.535 Az status=0008 Ze status=0009 05:00:41 Check angles 05:00:41 SkyScan query 05:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.58<-13172 Statuses=0008 0009 05:00:42 Msec=4500 True Az=112.995 Ze=-17.58 Az status=0008 Ze status=0009 05:00:42 Check angles 05:00:42 SkyScan query 05:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.375<-11775 Statuses=0008 0009 05:00:42 Msec=5250 True Az=112.995 Ze=3.375 Az status=0008 Ze status=0009 05:00:43 Check angles 05:00:43 SkyScan query 05:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:00:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:00:43 Message to Master queued w/err=0: serial=265838 error=0 05:00:48 Received message from Master: op=Filter serial=265839 05:00:48 Color wheel filter change from 0 to 0 05:00:48 FLIGetFilterPos err=0 currentPosition=0 05:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:48 Filter is already there-color wheel unchanged 05:00:48 Received message from Master: op=Shutter serial=265840 05:00:48 Shutter LASER close 05:00:49 Received message from Camera: op=State serial=265842 05:00:49 GetSingleValue result=40 Value=cccccccc 05:00:49 SkyScan query 05:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:49 Parameters OK 05:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:49 Set A/D data flow result=40 05:00:49 Set A/D channel type result=40 05:00:49 Set A/D encoding result=40 05:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:49 Set channel filter=0.000000e+000 result=40 05:00:49 Config A/D Result=40 05:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:49 Get A/D filter: -9.255963e+061 result=40 05:00:49 Get A/D value=-858993460 result=40 05:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:49 Parameters OK 05:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:49 Set A/D data flow result=40 05:00:49 Set A/D channel type result=40 05:00:49 Set A/D encoding result=40 05:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:49 Set channel filter=0.000000e+000 result=40 05:00:49 Config A/D Result=40 05:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:49 Get A/D filter: -9.255963e+061 result=40 05:00:49 Get A/D value=-858993460 result=40 05:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:49 Aux= 05:00:49 Message to Camera, serial 265842 queued 05:01:26 Received message from Master: op=PointingHead serial=265855 05:01:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:01:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:01:26 Point started: ret=0 05:01:26 point_skyscan result=0 05:01:27 Check angles 05:01:27 SkyScan query 05:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:01:28 Message to Master queued w/err=0: serial=265855 error=0 05:01:33 Received message from Master: op=Filter serial=265856 05:01:33 Color wheel filter change from 0 to 0 05:01:33 FLIGetFilterPos err=0 currentPosition=0 05:01:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:33 Filter is already there-color wheel unchanged 05:01:33 Received message from Master: op=Shutter serial=265857 05:01:33 Shutter LASER close 05:01:33 Received message from Camera: op=State serial=265859 05:01:33 GetSingleValue result=40 Value=cccccccc 05:01:33 SkyScan query 05:01:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:01:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:33 Parameters OK 05:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:33 Set A/D data flow result=40 05:01:33 Set A/D channel type result=40 05:01:33 Set A/D encoding result=40 05:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:33 Set channel filter=0.000000e+000 result=40 05:01:33 Config A/D Result=40 05:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:33 Get A/D filter: -9.255963e+061 result=40 05:01:33 Get A/D value=-858993460 result=40 05:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:33 Parameters OK 05:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:33 Set A/D data flow result=40 05:01:33 Set A/D channel type result=40 05:01:33 Set A/D encoding result=40 05:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:33 Set channel filter=0.000000e+000 result=40 05:01:33 Config A/D Result=40 05:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:33 Get A/D filter: -9.255963e+061 result=40 05:01:33 Get A/D value=-858993460 result=40 05:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:33 Aux= 05:01:33 Message to Camera, serial 265859 queued 05:02:09 Received message from Master: op=PointingHead serial=265871 05:02:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:10 Point started: ret=0 05:02:10 point_skyscan result=0 05:02:10 Check angles 05:02:10 SkyScan query 05:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:02:11 Message to Master queued w/err=0: serial=265871 error=0 05:02:16 Received message from Master: op=Filter serial=265872 05:02:16 Color wheel filter change from 0 to 0 05:02:16 FLIGetFilterPos err=0 currentPosition=0 05:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:16 Filter is already there-color wheel unchanged 05:02:16 Received message from Master: op=Shutter serial=265873 05:02:16 Shutter LASER close 05:02:16 Received message from Camera: op=State serial=265875 05:02:16 GetSingleValue result=40 Value=cccccccc 05:02:16 SkyScan query 05:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:17 Parameters OK 05:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:17 Set A/D data flow result=40 05:02:17 Set A/D channel type result=40 05:02:17 Set A/D encoding result=40 05:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:17 Set channel filter=0.000000e+000 result=40 05:02:17 Config A/D Result=40 05:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:17 Get A/D filter: -9.255963e+061 result=40 05:02:17 Get A/D value=-858993460 result=40 05:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:17 Parameters OK 05:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:17 Set A/D data flow result=40 05:02:17 Set A/D channel type result=40 05:02:17 Set A/D encoding result=40 05:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:17 Set channel filter=0.000000e+000 result=40 05:02:17 Config A/D Result=40 05:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:17 Get A/D filter: -9.255963e+061 result=40 05:02:17 Get A/D value=-858993460 result=40 05:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:17 Aux= 05:02:17 Message to Camera, serial 265875 queued 05:02:54 Received message from Master: op=PointingHead serial=265888 05:02:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:02:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:02:54 Point started: ret=0 05:02:54 point_skyscan result=0 05:02:55 Check angles 05:02:55 SkyScan query 05:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:02:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:02:55 Message to Master queued w/err=0: serial=265888 error=0 05:03:00 Received message from Master: op=Filter serial=265889 05:03:00 Color wheel filter change from 0 to 0 05:03:00 FLIGetFilterPos err=0 currentPosition=0 05:03:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:00 Filter is already there-color wheel unchanged 05:03:00 Received message from Master: op=Shutter serial=265890 05:03:00 Shutter LASER close 05:03:01 Received message from Camera: op=State serial=265892 05:03:01 GetSingleValue result=40 Value=cccccccc 05:03:01 SkyScan query 05:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:03:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:01 Parameters OK 05:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:01 Set A/D data flow result=40 05:03:01 Set A/D channel type result=40 05:03:01 Set A/D encoding result=40 05:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:01 Set channel filter=0.000000e+000 result=40 05:03:01 Config A/D Result=40 05:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:01 Get A/D filter: -9.255963e+061 result=40 05:03:01 Get A/D value=-858993460 result=40 05:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:01 Parameters OK 05:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:01 Set A/D data flow result=40 05:03:01 Set A/D channel type result=40 05:03:01 Set A/D encoding result=40 05:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:01 Set channel filter=0.000000e+000 result=40 05:03:01 Config A/D Result=40 05:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:01 Get A/D filter: -9.255963e+061 result=40 05:03:01 Get A/D value=-858993460 result=40 05:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:01 Aux= 05:03:01 Message to Camera, serial 265892 queued 05:03:35 Received message from Master: op=Identify serial=265899 05:03:38 Received message from Master: op=PointingHead serial=265908 05:03:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:03:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:03:38 Point started: ret=0 05:03:38 point_skyscan result=0 05:03:39 Check angles 05:03:39 SkyScan query 05:03:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 05:03:40 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 05:03:40 Check angles 05:03:40 SkyScan query 05:03:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.58<-14972 Statuses=0008 0009 05:03:40 Msec=750 True Az=112.995 Ze=-44.58 Az status=0008 Ze status=0009 05:03:41 Check angles 05:03:41 SkyScan query 05:03:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.52<-16368 Statuses=0008 0009 05:03:41 Msec=1500 True Az=112.995 Ze=-65.52 Az status=0008 Ze status=0009 05:03:41 Check angles 05:03:41 SkyScan query 05:03:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 05:03:42 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 05:03:42 Check angles 05:03:42 SkyScan query 05:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 05:03:43 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 05:03:43 Check angles 05:03:43 SkyScan query 05:03:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 05:03:43 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 05:03:44 Check angles 05:03:44 SkyScan query 05:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 05:03:44 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 05:03:44 Check angles 05:03:44 SkyScan query 05:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 05:03:45 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 05:03:45 Check angles 05:03:45 SkyScan query 05:03:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:03:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:03:46 Message to Master queued w/err=0: serial=265908 error=0 [UTC 2019-3-14 05:03:48] 05:03:51 Received message from Master: op=Filter serial=265909 05:03:51 Color wheel filter change from 0 to 0 05:03:51 FLIGetFilterPos err=0 currentPosition=0 05:03:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:51 Filter is already there-color wheel unchanged 05:03:51 Received message from Master: op=Shutter serial=265910 05:03:51 Shutter LASER open 05:03:51 Received message from Camera: op=State serial=265912 05:03:51 GetSingleValue result=40 Value=cccccccc 05:03:51 SkyScan query 05:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:52 Parameters OK 05:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:52 Set A/D data flow result=40 05:03:52 Set A/D channel type result=40 05:03:52 Set A/D encoding result=40 05:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:52 Set channel filter=0.000000e+000 result=40 05:03:52 Config A/D Result=40 05:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:52 Get A/D filter: -9.255963e+061 result=40 05:03:52 Get A/D value=-858993460 result=40 05:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:52 Parameters OK 05:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:52 Set A/D data flow result=40 05:03:52 Set A/D channel type result=40 05:03:52 Set A/D encoding result=40 05:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:52 Set channel filter=0.000000e+000 result=40 05:03:52 Config A/D Result=40 05:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:52 Get A/D filter: -9.255963e+061 result=40 05:03:52 Get A/D value=-858993460 result=40 05:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:52 Aux= 05:03:52 Message to Camera, serial 265912 queued 05:04:00 Received message from Master: op=Shutter serial=265922 05:04:00 Shutter LASER close 05:04:01 Received message from Master: op=PointingHead serial=265926 05:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:01 Point started: ret=0 05:04:01 point_skyscan result=0 05:04:02 Check angles 05:04:02 SkyScan query 05:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 05:04:02 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 05:04:03 Check angles 05:04:03 SkyScan query 05:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.815<-20121 Statuses=0008 0009 05:04:03 Msec=750 True Az=112.995 Ze=-121.815 Az status=0008 Ze status=0009 05:04:03 Check angles 05:04:03 SkyScan query 05:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.455<-18697 Statuses=0008 0009 05:04:04 Msec=1500 True Az=112.995 Ze=-100.455 Az status=0008 Ze status=0009 05:04:04 Check angles 05:04:04 SkyScan query 05:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 05:04:05 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 05:04:05 Check angles 05:04:05 SkyScan query 05:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 05:04:05 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 05:04:06 Check angles 05:04:06 SkyScan query 05:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.185<-14479 Statuses=0008 0009 05:04:06 Msec=3750 True Az=112.995 Ze=-37.185 Az status=0008 Ze status=0009 05:04:06 Check angles 05:04:06 SkyScan query 05:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 05:04:07 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 05:04:07 Check angles 05:04:07 SkyScan query 05:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 05:04:08 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 05:04:08 Check angles 05:04:08 SkyScan query 05:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:04:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:04:08 Message to Master queued w/err=0: serial=265926 error=0 05:04:13 Received message from Master: op=Filter serial=265927 05:04:13 Color wheel filter change from 0 to 0 05:04:13 FLIGetFilterPos err=0 currentPosition=0 05:04:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:13 Filter is already there-color wheel unchanged 05:04:14 Received message from Master: op=Shutter serial=265928 05:04:14 Shutter LASER close 05:04:14 Received message from Camera: op=State serial=265930 05:04:14 GetSingleValue result=40 Value=cccccccc 05:04:14 SkyScan query 05:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:14 Parameters OK 05:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:14 Set A/D data flow result=40 05:04:14 Set A/D channel type result=40 05:04:14 Set A/D encoding result=40 05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:14 Set channel filter=0.000000e+000 result=40 05:04:14 Config A/D Result=40 05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:14 Get A/D filter: -9.255963e+061 result=40 05:04:14 Get A/D value=-858993460 result=40 05:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:14 Parameters OK 05:04:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:14 Set A/D data flow result=40 05:04:14 Set A/D channel type result=40 05:04:14 Set A/D encoding result=40 05:04:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:14 Set channel filter=0.000000e+000 result=40 05:04:14 Config A/D Result=40 05:04:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:14 Get A/D filter: -9.255963e+061 result=40 05:04:14 Get A/D value=-858993460 result=40 05:04:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:14 Aux= 05:04:14 Message to Camera, serial 265930 queued 05:04:51 Received message from Master: op=PointingHead serial=265943 05:04:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:04:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:04:51 Point started: ret=0 05:04:51 point_skyscan result=0 05:04:52 Check angles 05:04:52 SkyScan query 05:04:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:04:53 Message to Master queued w/err=0: serial=265943 error=0 05:04:58 Received message from Master: op=Filter serial=265944 05:04:58 Color wheel filter change from 0 to 0 05:04:58 FLIGetFilterPos err=0 currentPosition=0 05:04:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:58 Filter is already there-color wheel unchanged 05:04:58 Received message from Master: op=Shutter serial=265945 05:04:58 Shutter LASER close 05:04:58 Received message from Camera: op=State serial=265947 05:04:58 GetSingleValue result=40 Value=cccccccc 05:04:58 SkyScan query 05:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:04:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:59 Parameters OK 05:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:59 Set A/D data flow result=40 05:04:59 Set A/D channel type result=40 05:04:59 Set A/D encoding result=40 05:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:59 Set channel filter=0.000000e+000 result=40 05:04:59 Config A/D Result=40 05:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:59 Get A/D filter: -9.255963e+061 result=40 05:04:59 Get A/D value=-858993460 result=40 05:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:59 Parameters OK 05:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:59 Set A/D data flow result=40 05:04:59 Set A/D channel type result=40 05:04:59 Set A/D encoding result=40 05:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:59 Set channel filter=0.000000e+000 result=40 05:04:59 Config A/D Result=40 05:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:59 Get A/D filter: -9.255963e+061 result=40 05:04:59 Get A/D value=-858993460 result=40 05:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:59 Aux= 05:04:59 Message to Camera, serial 265947 queued 05:05:35 Received message from Master: op=PointingHead serial=265960 05:05:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:05:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:05:36 Point started: ret=0 05:05:36 point_skyscan result=0 05:05:37 Check angles 05:05:37 SkyScan query 05:05:37 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 05:05:37 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 05:05:37 Check angles 05:05:37 SkyScan query 05:05:38 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 05:05:38 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 05:05:38 Check angles 05:05:38 SkyScan query 05:05:39 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 05:05:39 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 05:05:39 Check angles 05:05:39 SkyScan query 05:05:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 05:05:39 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 05:05:39 Message to Master queued w/err=0: serial=265960 error=0 05:05:44 Received message from Master: op=Filter serial=265961 05:05:44 Color wheel filter change from 0 to 0 05:05:44 FLIGetFilterPos err=0 currentPosition=0 05:05:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:44 Filter is already there-color wheel unchanged 05:05:45 Received message from Master: op=Shutter serial=265962 05:05:45 Shutter LASER close 05:05:45 Received message from Camera: op=State serial=265964 05:05:45 GetSingleValue result=40 Value=cccccccc 05:05:45 SkyScan query 05:05:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:05:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:45 Parameters OK 05:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:45 Set A/D data flow result=40 05:05:45 Set A/D channel type result=40 05:05:45 Set A/D encoding result=40 05:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:45 Set channel filter=0.000000e+000 result=40 05:05:45 Config A/D Result=40 05:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:45 Get A/D filter: -9.255963e+061 result=40 05:05:45 Get A/D value=-858993460 result=40 05:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:45 Parameters OK 05:05:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:45 Set A/D data flow result=40 05:05:45 Set A/D channel type result=40 05:05:45 Set A/D encoding result=40 05:05:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:45 Set channel filter=0.000000e+000 result=40 05:05:45 Config A/D Result=40 05:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:45 Get A/D filter: -9.255963e+061 result=40 05:05:45 Get A/D value=-858993460 result=40 05:05:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:45 Aux= 05:05:45 Message to Camera, serial 265964 queued 05:06:22 Received message from Master: op=PointingHead serial=265977 05:06:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:06:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:06:22 Point started: ret=0 05:06:22 point_skyscan result=0 05:06:23 Check angles 05:06:23 SkyScan query 05:06:24 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 05:06:24 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 05:06:24 Check angles 05:06:24 SkyScan query 05:06:24 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 05:06:24 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 05:06:25 Check angles 05:06:25 SkyScan query 05:06:25 SkyScan query done: ret=0 az=117.45<-7830 ze=6.495<-11567 Statuses=0009 0008 05:06:25 Msec=1500 True Az=117.45 Ze=6.495 Az status=0009 Ze status=0008 05:06:25 Check angles 05:06:25 SkyScan query 05:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:06:26 Message to Master queued w/err=0: serial=265977 error=0 05:06:31 Received message from Master: op=Filter serial=265978 05:06:31 Color wheel filter change from 0 to 0 05:06:31 FLIGetFilterPos err=0 currentPosition=0 05:06:31 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:31 Filter is already there-color wheel unchanged 05:06:31 Received message from Master: op=Shutter serial=265979 05:06:31 Shutter LASER close 05:06:31 Received message from Camera: op=State serial=265981 05:06:31 GetSingleValue result=40 Value=cccccccc 05:06:31 SkyScan query 05:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:32 Parameters OK 05:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:32 Set A/D data flow result=40 05:06:32 Set A/D channel type result=40 05:06:32 Set A/D encoding result=40 05:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:32 Set channel filter=0.000000e+000 result=40 05:06:32 Config A/D Result=40 05:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:32 Get A/D filter: -9.255963e+061 result=40 05:06:32 Get A/D value=-858993460 result=40 05:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:32 Parameters OK 05:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:32 Set A/D data flow result=40 05:06:32 Set A/D channel type result=40 05:06:32 Set A/D encoding result=40 05:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:32 Set channel filter=0.000000e+000 result=40 05:06:32 Config A/D Result=40 05:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:32 Get A/D filter: -9.255963e+061 result=40 05:06:32 Get A/D value=-858993460 result=40 05:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:32 Aux= 05:06:32 Message to Camera, serial 265981 queued 05:07:09 Received message from Master: op=PointingHead serial=265994 05:07:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:07:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:07:09 Point started: ret=0 05:07:09 point_skyscan result=0 05:07:10 Check angles 05:07:10 SkyScan query 05:07:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 05:07:10 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 05:07:10 Check angles 05:07:10 SkyScan query 05:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 05:07:11 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 05:07:11 Check angles 05:07:11 SkyScan query 05:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 05:07:12 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 05:07:12 Check angles 05:07:12 SkyScan query 05:07:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 05:07:12 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 05:07:13 Check angles 05:07:13 SkyScan query 05:07:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 05:07:13 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 05:07:13 Check angles 05:07:13 SkyScan query 05:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 05:07:14 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 05:07:14 Check angles 05:07:14 SkyScan query 05:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 05:07:15 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 05:07:15 Check angles 05:07:15 SkyScan query 05:07:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 05:07:15 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 05:07:16 Check angles 05:07:16 SkyScan query 05:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:07:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:07:16 Message to Master queued w/err=0: serial=265994 error=0 05:07:21 Received message from Master: op=Filter serial=265995 05:07:21 Color wheel filter change from 0 to 0 05:07:21 FLIGetFilterPos err=0 currentPosition=0 05:07:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:21 Filter is already there-color wheel unchanged 05:07:21 Received message from Master: op=Shutter serial=265996 05:07:21 Shutter LASER open 05:07:22 Received message from Camera: op=State serial=265998 05:07:22 GetSingleValue result=40 Value=cccccccc 05:07:22 SkyScan query 05:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:07:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:22 Parameters OK 05:07:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:22 Set A/D data flow result=40 05:07:22 Set A/D channel type result=40 05:07:22 Set A/D encoding result=40 05:07:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:22 Set channel filter=0.000000e+000 result=40 05:07:22 Config A/D Result=40 05:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:22 Get A/D filter: -9.255963e+061 result=40 05:07:22 Get A/D value=-858993460 result=40 05:07:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:22 Parameters OK 05:07:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:22 Set A/D data flow result=40 05:07:22 Set A/D channel type result=40 05:07:22 Set A/D encoding result=40 05:07:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:22 Set channel filter=0.000000e+000 result=40 05:07:22 Config A/D Result=40 05:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:22 Get A/D filter: -9.255963e+061 result=40 05:07:22 Get A/D value=-858993460 result=40 05:07:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:22 Aux= 05:07:22 Message to Camera, serial 265998 queued 05:07:31 Received message from Master: op=Shutter serial=266008 05:07:31 Shutter LASER close 05:07:31 Received message from Master: op=PointingHead serial=266012 05:07:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:07:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:07:31 Point started: ret=0 05:07:31 point_skyscan result=0 05:07:32 Check angles 05:07:32 SkyScan query 05:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 05:07:33 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 05:07:33 Check angles 05:07:33 SkyScan query 05:07:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 05:07:33 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 05:07:34 Check angles 05:07:34 SkyScan query 05:07:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 05:07:34 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 05:07:34 Check angles 05:07:34 SkyScan query 05:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 05:07:35 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 05:07:35 Check angles 05:07:35 SkyScan query 05:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 05:07:36 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 05:07:36 Check angles 05:07:36 SkyScan query 05:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.2<-14480 Statuses=0008 0009 05:07:36 Msec=3750 True Az=112.995 Ze=-37.2 Az status=0008 Ze status=0009 05:07:37 Check angles 05:07:37 SkyScan query 05:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.215<-13081 Statuses=0008 0009 05:07:37 Msec=4500 True Az=112.995 Ze=-16.215 Az status=0008 Ze status=0009 05:07:37 Check angles 05:07:37 SkyScan query 05:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 05:07:38 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 05:07:38 Check angles 05:07:38 SkyScan query 05:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:07:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:07:39 Message to Master queued w/err=0: serial=266012 error=0 05:07:44 Received message from Master: op=Filter serial=266013 05:07:44 Color wheel filter change from 0 to 0 05:07:44 FLIGetFilterPos err=0 currentPosition=0 05:07:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:44 Filter is already there-color wheel unchanged 05:07:44 Received message from Master: op=Shutter serial=266014 05:07:44 Shutter LASER close 05:07:44 Received message from Camera: op=State serial=266016 05:07:44 GetSingleValue result=40 Value=cccccccc 05:07:44 SkyScan query 05:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:07:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:45 Parameters OK 05:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:45 Set A/D data flow result=40 05:07:45 Set A/D channel type result=40 05:07:45 Set A/D encoding result=40 05:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:45 Set channel filter=0.000000e+000 result=40 05:07:45 Config A/D Result=40 05:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:45 Get A/D filter: -9.255963e+061 result=40 05:07:45 Get A/D value=-858993460 result=40 05:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:45 Parameters OK 05:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:45 Set A/D data flow result=40 05:07:45 Set A/D channel type result=40 05:07:45 Set A/D encoding result=40 05:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:45 Set channel filter=0.000000e+000 result=40 05:07:45 Config A/D Result=40 05:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:45 Get A/D filter: -9.255963e+061 result=40 05:07:45 Get A/D value=-858993460 result=40 05:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:45 Aux= 05:07:45 Message to Camera, serial 266016 queued 05:08:21 Received message from Master: op=PointingHead serial=266029 05:08:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:08:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:08:22 Point started: ret=0 05:08:22 point_skyscan result=0 05:08:23 Check angles 05:08:23 SkyScan query 05:08:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:08:23 Message to Master queued w/err=0: serial=266029 error=0 05:08:28 Received message from Master: op=Filter serial=266030 05:08:28 Color wheel filter change from 0 to 0 05:08:28 FLIGetFilterPos err=0 currentPosition=0 05:08:28 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:28 Filter is already there-color wheel unchanged 05:08:28 Received message from Master: op=Shutter serial=266031 05:08:28 Shutter LASER close 05:08:28 Received message from Camera: op=State serial=266033 05:08:28 GetSingleValue result=40 Value=cccccccc 05:08:28 SkyScan query 05:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:29 Parameters OK 05:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:29 Set A/D data flow result=40 05:08:29 Set A/D channel type result=40 05:08:29 Set A/D encoding result=40 05:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:29 Set channel filter=0.000000e+000 result=40 05:08:29 Config A/D Result=40 05:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:29 Get A/D filter: -9.255963e+061 result=40 05:08:29 Get A/D value=-858993460 result=40 05:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:29 Parameters OK 05:08:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:29 Set A/D data flow result=40 05:08:29 Set A/D channel type result=40 05:08:29 Set A/D encoding result=40 05:08:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:29 Set channel filter=0.000000e+000 result=40 05:08:29 Config A/D Result=40 05:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:29 Get A/D filter: -9.255963e+061 result=40 05:08:29 Get A/D value=-858993460 result=40 05:08:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:29 Aux= 05:08:29 Message to Camera, serial 266033 queued 05:09:05 Received message from Master: op=PointingHead serial=266045 05:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:05 Point started: ret=0 05:09:05 point_skyscan result=0 05:09:06 Check angles 05:09:06 SkyScan query 05:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:07 Message to Master queued w/err=0: serial=266045 error=0 05:09:12 Received message from Master: op=Filter serial=266046 05:09:12 Color wheel filter change from 0 to 0 05:09:12 FLIGetFilterPos err=0 currentPosition=0 05:09:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:12 Filter is already there-color wheel unchanged 05:09:12 Received message from Master: op=Shutter serial=266047 05:09:12 Shutter LASER close 05:09:12 Received message from Camera: op=State serial=266049 05:09:12 GetSingleValue result=40 Value=cccccccc 05:09:12 SkyScan query 05:09:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:12 Parameters OK 05:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:12 Set A/D data flow result=40 05:09:12 Set A/D channel type result=40 05:09:12 Set A/D encoding result=40 05:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:12 Set channel filter=0.000000e+000 result=40 05:09:12 Config A/D Result=40 05:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:12 Get A/D filter: -9.255963e+061 result=40 05:09:12 Get A/D value=-858993460 result=40 05:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:12 Parameters OK 05:09:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:12 Set A/D data flow result=40 05:09:12 Set A/D channel type result=40 05:09:12 Set A/D encoding result=40 05:09:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:12 Set channel filter=0.000000e+000 result=40 05:09:12 Config A/D Result=40 05:09:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:12 Get A/D filter: -9.255963e+061 result=40 05:09:12 Get A/D value=-858993460 result=40 05:09:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:12 Aux= 05:09:12 Message to Camera, serial 266049 queued 05:09:49 Received message from Master: op=PointingHead serial=266062 05:09:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:09:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:09:50 Point started: ret=0 05:09:50 point_skyscan result=0 05:09:50 Check angles 05:09:50 SkyScan query 05:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:09:51 Message to Master queued w/err=0: serial=266062 error=0 05:09:56 Received message from Master: op=Filter serial=266063 05:09:56 Color wheel filter change from 0 to 0 05:09:56 FLIGetFilterPos err=0 currentPosition=0 05:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:56 Filter is already there-color wheel unchanged 05:09:56 Received message from Master: op=Shutter serial=266064 05:09:56 Shutter LASER close 05:09:56 Received message from Camera: op=State serial=266066 05:09:56 GetSingleValue result=40 Value=cccccccc 05:09:56 SkyScan query 05:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:57 Parameters OK 05:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:57 Set A/D data flow result=40 05:09:57 Set A/D channel type result=40 05:09:57 Set A/D encoding result=40 05:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:57 Set channel filter=0.000000e+000 result=40 05:09:57 Config A/D Result=40 05:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:57 Get A/D filter: -9.255963e+061 result=40 05:09:57 Get A/D value=-858993460 result=40 05:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:57 Parameters OK 05:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:57 Set A/D data flow result=40 05:09:57 Set A/D channel type result=40 05:09:57 Set A/D encoding result=40 05:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:57 Set channel filter=0.000000e+000 result=40 05:09:57 Config A/D Result=40 05:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:57 Get A/D filter: -9.255963e+061 result=40 05:09:57 Get A/D value=-858993460 result=40 05:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:57 Aux= 05:09:57 Message to Camera, serial 266066 queued 05:10:33 Received message from Master: op=PointingHead serial=266078 05:10:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:10:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:10:33 Point started: ret=0 05:10:33 point_skyscan result=0 05:10:34 Check angles 05:10:34 SkyScan query 05:10:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 05:10:34 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 05:10:34 Check angles 05:10:34 SkyScan query 05:10:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 05:10:35 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 05:10:35 Check angles 05:10:35 SkyScan query 05:10:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 05:10:36 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 05:10:36 Check angles 05:10:36 SkyScan query 05:10:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 05:10:36 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 05:10:37 Check angles 05:10:37 SkyScan query 05:10:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 05:10:37 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 05:10:37 Check angles 05:10:37 SkyScan query 05:10:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.105<-20607 Statuses=0008 0009 05:10:38 Msec=3750 True Az=112.995 Ze=-129.105 Az status=0008 Ze status=0009 05:10:38 Check angles 05:10:38 SkyScan query 05:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.06<-22004 Statuses=0008 0009 05:10:39 Msec=4500 True Az=112.995 Ze=-150.06 Az status=0008 Ze status=0009 05:10:39 Check angles 05:10:39 SkyScan query 05:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 05:10:39 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 05:10:40 Check angles 05:10:40 SkyScan query 05:10:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:10:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:10:40 Message to Master queued w/err=0: serial=266078 error=0 05:10:45 Received message from Master: op=Filter serial=266079 05:10:45 Color wheel filter change from 0 to 0 05:10:45 FLIGetFilterPos err=0 currentPosition=0 05:10:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:45 Filter is already there-color wheel unchanged 05:10:45 Received message from Master: op=Shutter serial=266080 05:10:45 Shutter LASER open 05:10:46 Received message from Camera: op=State serial=266082 05:10:46 GetSingleValue result=40 Value=cccccccc 05:10:46 SkyScan query 05:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:10:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:46 Parameters OK 05:10:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:46 Set A/D data flow result=40 05:10:46 Set A/D channel type result=40 05:10:46 Set A/D encoding result=40 05:10:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:46 Set channel filter=0.000000e+000 result=40 05:10:46 Config A/D Result=40 05:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:46 Get A/D filter: -9.255963e+061 result=40 05:10:46 Get A/D value=-858993460 result=40 05:10:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:46 Parameters OK 05:10:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:46 Set A/D data flow result=40 05:10:46 Set A/D channel type result=40 05:10:46 Set A/D encoding result=40 05:10:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:46 Set channel filter=0.000000e+000 result=40 05:10:46 Config A/D Result=40 05:10:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:46 Get A/D filter: -9.255963e+061 result=40 05:10:46 Get A/D value=-858993460 result=40 05:10:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:46 Aux= 05:10:46 Message to Camera, serial 266082 queued 05:10:55 Received message from Master: op=Shutter serial=266092 05:10:55 Shutter LASER close 05:10:55 Received message from Master: op=PointingHead serial=266096 05:10:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:10:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:10:56 Point started: ret=0 05:10:56 point_skyscan result=0 05:10:56 Check angles 05:10:56 SkyScan query 05:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 05:10:57 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 05:10:57 Check angles 05:10:57 SkyScan query 05:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.475<-20165 Statuses=0008 0009 05:10:58 Msec=750 True Az=112.995 Ze=-122.475 Az status=0008 Ze status=0009 05:10:58 Check angles 05:10:58 SkyScan query 05:10:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 05:10:58 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 05:10:59 Check angles 05:10:59 SkyScan query 05:10:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.535<-17369 Statuses=0008 0009 05:10:59 Msec=2250 True Az=112.995 Ze=-80.535 Az status=0008 Ze status=0009 05:10:59 Check angles 05:10:59 SkyScan query 05:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.595<-15973 Statuses=0008 0009 05:11:00 Msec=3000 True Az=112.995 Ze=-59.595 Az status=0008 Ze status=0009 05:11:00 Check angles 05:11:00 SkyScan query 05:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.625<-14575 Statuses=0008 0009 05:11:01 Msec=3750 True Az=112.995 Ze=-38.625 Az status=0008 Ze status=0009 05:11:01 Check angles 05:11:01 SkyScan query 05:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.67<-13178 Statuses=0008 0009 05:11:01 Msec=4500 True Az=112.995 Ze=-17.67 Az status=0008 Ze status=0009 05:11:02 Check angles 05:11:02 SkyScan query 05:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.285<-11781 Statuses=0008 0009 05:11:02 Msec=5250 True Az=112.995 Ze=3.285 Az status=0008 Ze status=0009 05:11:02 Check angles 05:11:02 SkyScan query 05:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:11:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:11:03 Message to Master queued w/err=0: serial=266096 error=0 05:11:08 Received message from Master: op=Filter serial=266097 05:11:08 Color wheel filter change from 0 to 0 05:11:08 FLIGetFilterPos err=0 currentPosition=0 05:11:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:08 Filter is already there-color wheel unchanged 05:11:08 Received message from Master: op=Shutter serial=266098 05:11:08 Shutter LASER close 05:11:08 Received message from Camera: op=State serial=266100 05:11:08 GetSingleValue result=40 Value=cccccccc 05:11:08 SkyScan query 05:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:09 Parameters OK 05:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:09 Set A/D data flow result=40 05:11:09 Set A/D channel type result=40 05:11:09 Set A/D encoding result=40 05:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:09 Set channel filter=0.000000e+000 result=40 05:11:09 Config A/D Result=40 05:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:09 Get A/D filter: -9.255963e+061 result=40 05:11:09 Get A/D value=-858993460 result=40 05:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:09 Parameters OK 05:11:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:09 Set A/D data flow result=40 05:11:09 Set A/D channel type result=40 05:11:09 Set A/D encoding result=40 05:11:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:09 Set channel filter=0.000000e+000 result=40 05:11:09 Config A/D Result=40 05:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:09 Get A/D filter: -9.255963e+061 result=40 05:11:09 Get A/D value=-858993460 result=40 05:11:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:09 Aux= 05:11:09 Message to Camera, serial 266100 queued 05:11:46 Received message from Master: op=PointingHead serial=266113 05:11:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:11:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:11:46 Point started: ret=0 05:11:46 point_skyscan result=0 05:11:47 Check angles 05:11:47 SkyScan query 05:11:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:11:47 Message to Master queued w/err=0: serial=266113 error=0 05:11:52 Received message from Master: op=Filter serial=266114 05:11:52 Color wheel filter change from 0 to 0 05:11:52 FLIGetFilterPos err=0 currentPosition=0 05:11:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:52 Filter is already there-color wheel unchanged 05:11:52 Received message from Master: op=Shutter serial=266115 05:11:52 Shutter LASER close 05:11:53 Received message from Camera: op=State serial=266117 05:11:53 GetSingleValue result=40 Value=cccccccc 05:11:53 SkyScan query 05:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:11:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:53 Parameters OK 05:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:53 Set A/D data flow result=40 05:11:53 Set A/D channel type result=40 05:11:53 Set A/D encoding result=40 05:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:53 Set channel filter=0.000000e+000 result=40 05:11:53 Config A/D Result=40 05:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:53 Get A/D filter: -9.255963e+061 result=40 05:11:53 Get A/D value=-858993460 result=40 05:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:53 Parameters OK 05:11:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:53 Set A/D data flow result=40 05:11:53 Set A/D channel type result=40 05:11:53 Set A/D encoding result=40 05:11:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:53 Set channel filter=0.000000e+000 result=40 05:11:53 Config A/D Result=40 05:11:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:53 Get A/D filter: -9.255963e+061 result=40 05:11:53 Get A/D value=-858993460 result=40 05:11:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:53 Aux= 05:11:53 Message to Camera, serial 266117 queued 05:12:30 Received message from Master: op=PointingHead serial=266130 05:12:30 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:12:30 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:12:30 Point started: ret=0 05:12:30 point_skyscan result=0 05:12:31 Check angles 05:12:31 SkyScan query 05:12:32 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 05:12:32 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 05:12:32 Check angles 05:12:32 SkyScan query 05:12:32 SkyScan query done: ret=0 az=153.45<-10230 ze=-6.495<-12433 Statuses=0009 0008 05:12:32 Msec=750 True Az=153.45 Ze=-6.495 Az status=0009 Ze status=0008 05:12:33 Check angles 05:12:33 SkyScan query 05:12:33 SkyScan query done: ret=0 az=170.88<-11392 ze=-6.495<-12433 Statuses=0009 0008 05:12:33 Msec=1500 True Az=170.88 Ze=-6.495 Az status=0009 Ze status=0008 05:12:33 Check angles 05:12:33 SkyScan query 05:12:34 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 05:12:34 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 05:12:34 Message to Master queued w/err=0: serial=266130 error=0 05:12:39 Received message from Master: op=Filter serial=266131 05:12:39 Color wheel filter change from 0 to 0 05:12:39 FLIGetFilterPos err=0 currentPosition=0 05:12:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:39 Filter is already there-color wheel unchanged 05:12:39 Received message from Master: op=Shutter serial=266132 05:12:39 Shutter LASER close 05:12:39 Received message from Camera: op=State serial=266134 05:12:39 GetSingleValue result=40 Value=cccccccc 05:12:39 SkyScan query 05:12:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:12:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:40 Parameters OK 05:12:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:40 Set A/D data flow result=40 05:12:40 Set A/D channel type result=40 05:12:40 Set A/D encoding result=40 05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:40 Set channel filter=0.000000e+000 result=40 05:12:40 Config A/D Result=40 05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:40 Get A/D filter: -9.255963e+061 result=40 05:12:40 Get A/D value=-858993460 result=40 05:12:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:40 Aux= 05:12:40 Message to Camera, serial 266134 queued 05:13:17 Received message from Master: op=PointingHead serial=266147 05:13:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:13:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:13:17 Point started: ret=0 05:13:17 point_skyscan result=0 05:13:18 Check angles 05:13:18 SkyScan query 05:13:18 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 05:13:18 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 05:13:18 Check angles 05:13:18 SkyScan query 05:13:19 SkyScan query done: ret=0 az=135.81<-9054 ze=6.495<-11567 Statuses=0009 0008 05:13:19 Msec=750 True Az=135.81 Ze=6.495 Az status=0009 Ze status=0008 05:13:19 Check angles 05:13:19 SkyScan query 05:13:20 SkyScan query done: ret=0 az=118.32<-7888 ze=6.495<-11567 Statuses=0009 0008 05:13:20 Msec=1500 True Az=118.32 Ze=6.495 Az status=0009 Ze status=0008 05:13:20 Check angles 05:13:20 SkyScan query 05:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:20 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:13:20 Message to Master queued w/err=0: serial=266147 error=0 05:13:25 Received message from Master: op=Filter serial=266148 05:13:25 Color wheel filter change from 0 to 0 05:13:25 FLIGetFilterPos err=0 currentPosition=0 05:13:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:25 Filter is already there-color wheel unchanged 05:13:26 Received message from Master: op=Shutter serial=266149 05:13:26 Shutter LASER close 05:13:26 Received message from Camera: op=State serial=266151 05:13:26 GetSingleValue result=40 Value=cccccccc 05:13:26 SkyScan query 05:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:13:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:26 Parameters OK 05:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:26 Set A/D data flow result=40 05:13:26 Set A/D channel type result=40 05:13:26 Set A/D encoding result=40 05:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:26 Set channel filter=0.000000e+000 result=40 05:13:26 Config A/D Result=40 05:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:26 Get A/D filter: -9.255963e+061 result=40 05:13:26 Get A/D value=-858993460 result=40 05:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:26 Parameters OK 05:13:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:26 Set A/D data flow result=40 05:13:26 Set A/D channel type result=40 05:13:26 Set A/D encoding result=40 05:13:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:26 Set channel filter=0.000000e+000 result=40 05:13:26 Config A/D Result=40 05:13:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:26 Get A/D filter: -9.255963e+061 result=40 05:13:26 Get A/D value=-858993460 result=40 05:13:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:26 Aux= 05:13:26 Message to Camera, serial 266151 queued 05:14:03 Received message from Master: op=PointingHead serial=266164 05:14:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:14:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:14:03 Point started: ret=0 05:14:03 point_skyscan result=0 05:14:04 Check angles 05:14:04 SkyScan query 05:14:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 05:14:05 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 05:14:05 Check angles 05:14:05 SkyScan query 05:14:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.045<-15003 Statuses=0008 0009 05:14:06 Msec=750 True Az=112.995 Ze=-45.045 Az status=0008 Ze status=0009 05:14:06 Check angles 05:14:06 SkyScan query 05:14:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.03<-16402 Statuses=0008 0009 05:14:06 Msec=1500 True Az=112.995 Ze=-66.03 Az status=0008 Ze status=0009 05:14:06 Check angles 05:14:06 SkyScan query 05:14:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.97<-17798 Statuses=0008 0009 05:14:07 Msec=2250 True Az=112.995 Ze=-86.97 Az status=0008 Ze status=0009 05:14:07 Check angles 05:14:07 SkyScan query 05:14:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 05:14:08 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 05:14:08 Check angles 05:14:08 SkyScan query 05:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.345<-20623 Statuses=0008 0009 05:14:09 Msec=3750 True Az=112.995 Ze=-129.345 Az status=0008 Ze status=0009 05:14:09 Check angles [UTC 2019-3-14 05:14:09] 05:14:09 SkyScan query 05:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-152.07<-22138 Statuses=0008 0009 05:14:09 Msec=4500 True Az=112.995 Ze=-152.07 Az status=0008 Ze status=0009 05:14:10 Check angles 05:14:10 SkyScan query 05:14:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 05:14:10 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 05:14:10 Check angles 05:14:10 SkyScan query 05:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:14:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:14:11 Message to Master queued w/err=0: serial=266164 error=0 05:14:16 Received message from Master: op=Filter serial=266165 05:14:16 Color wheel filter change from 0 to 0 05:14:16 FLIGetFilterPos err=0 currentPosition=0 05:14:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:16 Filter is already there-color wheel unchanged 05:14:16 Received message from Master: op=Shutter serial=266166 05:14:16 Shutter LASER open 05:14:16 Received message from Camera: op=State serial=266168 05:14:16 GetSingleValue result=40 Value=cccccccc 05:14:16 SkyScan query 05:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:17 Parameters OK 05:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:17 Set A/D data flow result=40 05:14:17 Set A/D channel type result=40 05:14:17 Set A/D encoding result=40 05:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:17 Set channel filter=0.000000e+000 result=40 05:14:17 Config A/D Result=40 05:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:17 Get A/D filter: -9.255963e+061 result=40 05:14:17 Get A/D value=-858993460 result=40 05:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:17 Aux= 05:14:17 Message to Camera, serial 266168 queued 05:14:25 Received message from Master: op=Shutter serial=266178 05:14:25 Shutter LASER close 05:14:26 Received message from Master: op=PointingHead serial=266182 05:14:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:14:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:14:26 Point started: ret=0 05:14:26 point_skyscan result=0 05:14:27 Check angles 05:14:27 SkyScan query 05:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 05:14:27 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 05:14:27 Check angles 05:14:27 SkyScan query 05:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.61<-20174 Statuses=0008 0009 05:14:28 Msec=750 True Az=112.995 Ze=-122.61 Az status=0008 Ze status=0009 05:14:28 Check angles 05:14:28 SkyScan query 05:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.61<-18774 Statuses=0008 0009 05:14:29 Msec=1500 True Az=112.995 Ze=-101.61 Az status=0008 Ze status=0009 05:14:29 Check angles 05:14:29 SkyScan query 05:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.655<-17377 Statuses=0008 0009 05:14:30 Msec=2250 True Az=112.995 Ze=-80.655 Az status=0008 Ze status=0009 05:14:30 Check angles 05:14:30 SkyScan query 05:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.715<-15981 Statuses=0008 0009 05:14:30 Msec=3000 True Az=112.995 Ze=-59.715 Az status=0008 Ze status=0009 05:14:30 Check angles 05:14:30 SkyScan query 05:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.76<-14584 Statuses=0008 0009 05:14:31 Msec=3750 True Az=112.995 Ze=-38.76 Az status=0008 Ze status=0009 05:14:31 Check angles 05:14:31 SkyScan query 05:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 05:14:32 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 05:14:32 Check angles 05:14:32 SkyScan query 05:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 05:14:33 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 05:14:33 Check angles 05:14:33 SkyScan query 05:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:14:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:14:33 Message to Master queued w/err=0: serial=266182 error=0 05:14:38 Received message from Master: op=Filter serial=266183 05:14:38 Color wheel filter change from 0 to 0 05:14:38 FLIGetFilterPos err=0 currentPosition=0 05:14:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:38 Filter is already there-color wheel unchanged 05:14:38 Received message from Master: op=Shutter serial=266184 05:14:38 Shutter LASER close 05:14:39 Received message from Camera: op=State serial=266186 05:14:39 GetSingleValue result=40 Value=cccccccc 05:14:39 SkyScan query 05:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:39 Parameters OK 05:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:39 Set A/D data flow result=40 05:14:39 Set A/D channel type result=40 05:14:39 Set A/D encoding result=40 05:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:39 Set channel filter=0.000000e+000 result=40 05:14:39 Config A/D Result=40 05:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:39 Get A/D filter: -9.255963e+061 result=40 05:14:39 Get A/D value=-858993460 result=40 05:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:39 Parameters OK 05:14:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:39 Set A/D data flow result=40 05:14:39 Set A/D channel type result=40 05:14:39 Set A/D encoding result=40 05:14:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:39 Set channel filter=0.000000e+000 result=40 05:14:39 Config A/D Result=40 05:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:39 Get A/D filter: -9.255963e+061 result=40 05:14:39 Get A/D value=-858993460 result=40 05:14:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:39 Aux= 05:14:39 Message to Camera, serial 266186 queued 05:15:16 Received message from Master: op=PointingHead serial=266199 05:15:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:15:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:15:16 Point started: ret=0 05:15:16 point_skyscan result=0 05:15:17 Check angles 05:15:17 SkyScan query 05:15:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:15:18 Message to Master queued w/err=0: serial=266199 error=0 05:15:23 Received message from Master: op=Filter serial=266200 05:15:23 Color wheel filter change from 0 to 0 05:15:23 FLIGetFilterPos err=0 currentPosition=0 05:15:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:23 Filter is already there-color wheel unchanged 05:15:23 Received message from Master: op=Shutter serial=266201 05:15:23 Shutter LASER close 05:15:23 Received message from Camera: op=State serial=266203 05:15:23 GetSingleValue result=40 Value=cccccccc 05:15:23 SkyScan query 05:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:15:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:23 Parameters OK 05:15:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:23 Set A/D data flow result=40 05:15:23 Set A/D channel type result=40 05:15:23 Set A/D encoding result=40 05:15:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:23 Set channel filter=0.000000e+000 result=40 05:15:23 Config A/D Result=40 05:15:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:23 Get A/D filter: -9.255963e+061 result=40 05:15:23 Get A/D value=-858993460 result=40 05:15:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:23 Parameters OK 05:15:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:23 Set A/D data flow result=40 05:15:23 Set A/D channel type result=40 05:15:23 Set A/D encoding result=40 05:15:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:23 Set channel filter=0.000000e+000 result=40 05:15:23 Config A/D Result=40 05:15:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:23 Get A/D filter: -9.255963e+061 result=40 05:15:23 Get A/D value=-858993460 result=40 05:15:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:23 Aux= 05:15:23 Message to Camera, serial 266203 queued 05:16:00 Received message from Master: op=PointingHead serial=266216 05:16:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:01 Point started: ret=0 05:16:01 point_skyscan result=0 05:16:01 Check angles 05:16:01 SkyScan query 05:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:02 Message to Master queued w/err=0: serial=266216 error=0 05:16:07 Received message from Master: op=Filter serial=266217 05:16:07 Color wheel filter change from 0 to 0 05:16:07 FLIGetFilterPos err=0 currentPosition=0 05:16:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:07 Filter is already there-color wheel unchanged 05:16:07 Received message from Master: op=Shutter serial=266218 05:16:07 Shutter LASER close 05:16:07 Received message from Camera: op=State serial=266220 05:16:07 GetSingleValue result=40 Value=cccccccc 05:16:07 SkyScan query 05:16:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:08 Parameters OK 05:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:08 Set A/D data flow result=40 05:16:08 Set A/D channel type result=40 05:16:08 Set A/D encoding result=40 05:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:08 Set channel filter=0.000000e+000 result=40 05:16:08 Config A/D Result=40 05:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:08 Get A/D filter: -9.255963e+061 result=40 05:16:08 Get A/D value=-858993460 result=40 05:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:08 Parameters OK 05:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:08 Set A/D data flow result=40 05:16:08 Set A/D channel type result=40 05:16:08 Set A/D encoding result=40 05:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:08 Set channel filter=0.000000e+000 result=40 05:16:08 Config A/D Result=40 05:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:08 Get A/D filter: -9.255963e+061 result=40 05:16:08 Get A/D value=-858993460 result=40 05:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:08 Aux= 05:16:08 Message to Camera, serial 266220 queued 05:16:45 Received message from Master: op=PointingHead serial=266233 05:16:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:16:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:16:45 Point started: ret=0 05:16:45 point_skyscan result=0 05:16:46 Check angles 05:16:46 SkyScan query 05:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:16:46 Message to Master queued w/err=0: serial=266233 error=0 05:16:51 Received message from Master: op=Filter serial=266234 05:16:51 Color wheel filter change from 0 to 0 05:16:51 FLIGetFilterPos err=0 currentPosition=0 05:16:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:51 Filter is already there-color wheel unchanged 05:16:51 Received message from Master: op=Shutter serial=266235 05:16:51 Shutter LASER close 05:16:51 Received message from Camera: op=State serial=266237 05:16:51 GetSingleValue result=40 Value=cccccccc 05:16:51 SkyScan query 05:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:16:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:52 Parameters OK 05:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:52 Set A/D data flow result=40 05:16:52 Set A/D channel type result=40 05:16:52 Set A/D encoding result=40 05:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:52 Set channel filter=0.000000e+000 result=40 05:16:52 Config A/D Result=40 05:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:52 Get A/D filter: -9.255963e+061 result=40 05:16:52 Get A/D value=-858993460 result=40 05:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:52 Parameters OK 05:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:52 Set A/D data flow result=40 05:16:52 Set A/D channel type result=40 05:16:52 Set A/D encoding result=40 05:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:52 Set channel filter=0.000000e+000 result=40 05:16:52 Config A/D Result=40 05:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:52 Get A/D filter: -9.255963e+061 result=40 05:16:52 Get A/D value=-858993460 result=40 05:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:52 Aux= 05:16:52 Message to Camera, serial 266237 queued 05:17:29 Received message from Master: op=PointingHead serial=266250 05:17:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:17:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:17:29 Point started: ret=0 05:17:29 point_skyscan result=0 05:17:30 Check angles 05:17:30 SkyScan query 05:17:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 05:17:31 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 05:17:31 Check angles 05:17:31 SkyScan query 05:17:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 05:17:31 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 05:17:31 Check angles 05:17:31 SkyScan query 05:17:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 05:17:32 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 05:17:32 Check angles 05:17:32 SkyScan query 05:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 05:17:33 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 05:17:33 Check angles 05:17:33 SkyScan query 05:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 05:17:34 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 05:17:34 Check angles 05:17:34 SkyScan query 05:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 05:17:34 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 05:17:35 Check angles 05:17:35 SkyScan query 05:17:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.15<-22010 Statuses=0008 0009 05:17:35 Msec=4500 True Az=112.995 Ze=-150.15 Az status=0008 Ze status=0009 05:17:35 Check angles 05:17:35 SkyScan query 05:17:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.285<-23419 Statuses=0008 0009 05:17:36 Msec=5250 True Az=112.995 Ze=-171.285 Az status=0008 Ze status=0009 05:17:36 Check angles 05:17:36 SkyScan query 05:17:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:17:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:17:37 Message to Master queued w/err=0: serial=266250 error=0 05:17:42 Received message from Master: op=Filter serial=266251 05:17:42 Color wheel filter change from 0 to 0 05:17:42 FLIGetFilterPos err=0 currentPosition=0 05:17:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:42 Filter is already there-color wheel unchanged 05:17:42 Received message from Master: op=Shutter serial=266252 05:17:42 Shutter LASER open 05:17:42 Received message from Camera: op=State serial=266254 05:17:42 GetSingleValue result=40 Value=cccccccc 05:17:42 SkyScan query 05:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:17:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:43 Parameters OK 05:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:43 Set A/D data flow result=40 05:17:43 Set A/D channel type result=40 05:17:43 Set A/D encoding result=40 05:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:43 Set channel filter=0.000000e+000 result=40 05:17:43 Config A/D Result=40 05:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:43 Get A/D filter: -9.255963e+061 result=40 05:17:43 Get A/D value=-858993460 result=40 05:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:43 Parameters OK 05:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:43 Set A/D data flow result=40 05:17:43 Set A/D channel type result=40 05:17:43 Set A/D encoding result=40 05:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:43 Set channel filter=0.000000e+000 result=40 05:17:43 Config A/D Result=40 05:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:43 Get A/D filter: -9.255963e+061 result=40 05:17:43 Get A/D value=-858993460 result=40 05:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:43 Aux= 05:17:43 Message to Camera, serial 266254 queued 05:17:51 Received message from Master: op=Shutter serial=266264 05:17:51 Shutter LASER close 05:17:52 Received message from Master: op=PointingHead serial=266268 05:17:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:17:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:17:52 Point started: ret=0 05:17:52 point_skyscan result=0 05:17:53 Check angles 05:17:53 SkyScan query 05:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 05:17:53 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 05:17:54 Check angles 05:17:54 SkyScan query 05:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 05:17:54 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 05:17:54 Check angles 05:17:54 SkyScan query 05:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.65<-18710 Statuses=0008 0009 05:17:55 Msec=1500 True Az=112.995 Ze=-100.65 Az status=0008 Ze status=0009 05:17:55 Check angles 05:17:55 SkyScan query 05:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 05:17:56 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 05:17:56 Check angles 05:17:56 SkyScan query 05:17:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 05:17:56 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 05:17:57 Check angles 05:17:57 SkyScan query 05:17:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 05:17:57 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 05:17:57 Check angles 05:17:57 SkyScan query 05:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 05:17:58 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 05:17:58 Check angles 05:17:58 SkyScan query 05:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 05:17:59 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 05:17:59 Check angles 05:17:59 SkyScan query 05:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:17:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:17:59 Message to Master queued w/err=0: serial=266268 error=0 05:18:04 Received message from Master: op=Filter serial=266269 05:18:04 Color wheel filter change from 0 to 0 05:18:04 FLIGetFilterPos err=0 currentPosition=0 05:18:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:04 Filter is already there-color wheel unchanged 05:18:05 Received message from Master: op=Shutter serial=266270 05:18:05 Shutter LASER close 05:18:05 Received message from Camera: op=State serial=266272 05:18:05 GetSingleValue result=40 Value=cccccccc 05:18:05 SkyScan query 05:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:05 Parameters OK 05:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:05 Set A/D data flow result=40 05:18:05 Set A/D channel type result=40 05:18:05 Set A/D encoding result=40 05:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:05 Set channel filter=0.000000e+000 result=40 05:18:05 Config A/D Result=40 05:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:05 Get A/D filter: -9.255963e+061 result=40 05:18:05 Get A/D value=-858993460 result=40 05:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:05 Parameters OK 05:18:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:05 Set A/D data flow result=40 05:18:05 Set A/D channel type result=40 05:18:05 Set A/D encoding result=40 05:18:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:05 Set channel filter=0.000000e+000 result=40 05:18:05 Config A/D Result=40 05:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:05 Get A/D filter: -9.255963e+061 result=40 05:18:05 Get A/D value=-858993460 result=40 05:18:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:05 Aux= 05:18:05 Message to Camera, serial 266272 queued 05:18:42 Received message from Master: op=PointingHead serial=266285 05:18:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:18:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:18:42 Point started: ret=0 05:18:42 point_skyscan result=0 05:18:43 Check angles 05:18:43 SkyScan query 05:18:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:18:44 Message to Master queued w/err=0: serial=266285 error=0 05:18:49 Received message from Master: op=Filter serial=266286 05:18:49 Color wheel filter change from 0 to 0 05:18:49 FLIGetFilterPos err=0 currentPosition=0 05:18:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:49 Filter is already there-color wheel unchanged 05:18:49 Received message from Master: op=Shutter serial=266287 05:18:49 Shutter LASER close 05:18:49 Received message from Camera: op=State serial=266289 05:18:49 GetSingleValue result=40 Value=cccccccc 05:18:49 SkyScan query 05:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:18:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:50 Parameters OK 05:18:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:50 Set A/D data flow result=40 05:18:50 Set A/D channel type result=40 05:18:50 Set A/D encoding result=40 05:18:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:50 Set channel filter=0.000000e+000 result=40 05:18:50 Config A/D Result=40 05:18:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:50 Get A/D filter: -9.255963e+061 result=40 05:18:50 Get A/D value=-858993460 result=40 05:18:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:50 Parameters OK 05:18:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:50 Set A/D data flow result=40 05:18:50 Set A/D channel type result=40 05:18:50 Set A/D encoding result=40 05:18:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:50 Set channel filter=0.000000e+000 result=40 05:18:50 Config A/D Result=40 05:18:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:50 Get A/D filter: -9.255963e+061 result=40 05:18:50 Get A/D value=-858993460 result=40 05:18:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:50 Aux= 05:18:50 Message to Camera, serial 266289 queued 05:19:26 Received message from Master: op=PointingHead serial=266302 05:19:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:19:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:19:27 Point started: ret=0 05:19:27 point_skyscan result=0 05:19:27 Check angles 05:19:27 SkyScan query 05:19:28 SkyScan query done: ret=0 az=135.855<-9057 ze=-6.51<-12434 Statuses=0009 0008 05:19:28 Msec=0 True Az=135.855 Ze=-6.51 Az status=0009 Ze status=0008 05:19:28 Check angles 05:19:28 SkyScan query 05:19:29 SkyScan query done: ret=0 az=153.63<-10242 ze=-6.495<-12433 Statuses=0009 0008 05:19:29 Msec=750 True Az=153.63 Ze=-6.495 Az status=0009 Ze status=0008 05:19:29 Check angles 05:19:29 SkyScan query 05:19:30 SkyScan query done: ret=0 az=171.48<-11432 ze=-6.495<-12433 Statuses=0009 0008 05:19:30 Msec=1500 True Az=171.48 Ze=-6.495 Az status=0009 Ze status=0008 05:19:30 Check angles 05:19:30 SkyScan query 05:19:30 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 05:19:30 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 05:19:30 Message to Master queued w/err=0: serial=266302 error=0 05:19:35 Received message from Master: op=Filter serial=266303 05:19:35 Color wheel filter change from 0 to 0 05:19:35 FLIGetFilterPos err=0 currentPosition=0 05:19:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:35 Filter is already there-color wheel unchanged 05:19:36 Received message from Master: op=Shutter serial=266304 05:19:36 Shutter LASER close 05:19:36 Received message from Camera: op=State serial=266306 05:19:36 GetSingleValue result=40 Value=cccccccc 05:19:36 SkyScan query 05:19:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:19:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:36 Parameters OK 05:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:36 Set A/D data flow result=40 05:19:36 Set A/D channel type result=40 05:19:36 Set A/D encoding result=40 05:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:36 Set channel filter=0.000000e+000 result=40 05:19:36 Config A/D Result=40 05:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:36 Get A/D filter: -9.255963e+061 result=40 05:19:36 Get A/D value=-858993460 result=40 05:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:36 Parameters OK 05:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:36 Set A/D data flow result=40 05:19:36 Set A/D channel type result=40 05:19:36 Set A/D encoding result=40 05:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:36 Set channel filter=0.000000e+000 result=40 05:19:36 Config A/D Result=40 05:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:36 Get A/D filter: -9.255963e+061 result=40 05:19:36 Get A/D value=-858993460 result=40 05:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:36 Aux= 05:19:36 Message to Camera, serial 266306 queued 05:20:13 Received message from Master: op=PointingHead serial=266319 05:20:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:20:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:20:13 Point started: ret=0 05:20:13 point_skyscan result=0 05:20:14 Check angles 05:20:14 SkyScan query 05:20:15 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 05:20:15 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 05:20:15 Check angles 05:20:15 SkyScan query 05:20:15 SkyScan query done: ret=0 az=135.42<-9028 ze=6.495<-11567 Statuses=0009 0008 05:20:15 Msec=750 True Az=135.42 Ze=6.495 Az status=0009 Ze status=0008 05:20:16 Check angles 05:20:16 SkyScan query 05:20:16 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 05:20:16 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 05:20:16 Check angles 05:20:16 SkyScan query 05:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:20:17 Message to Master queued w/err=0: serial=266319 error=0 05:20:22 Received message from Master: op=Filter serial=266320 05:20:22 Color wheel filter change from 0 to 0 05:20:22 FLIGetFilterPos err=0 currentPosition=0 05:20:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:22 Filter is already there-color wheel unchanged 05:20:22 Received message from Master: op=Shutter serial=266321 05:20:22 Shutter LASER close 05:20:22 Received message from Camera: op=State serial=266323 05:20:22 GetSingleValue result=40 Value=cccccccc 05:20:22 SkyScan query 05:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:20:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:23 Parameters OK 05:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:23 Set A/D data flow result=40 05:20:23 Set A/D channel type result=40 05:20:23 Set A/D encoding result=40 05:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:23 Set channel filter=0.000000e+000 result=40 05:20:23 Config A/D Result=40 05:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:23 Get A/D filter: -9.255963e+061 result=40 05:20:23 Get A/D value=-858993460 result=40 05:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:23 Parameters OK 05:20:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:23 Set A/D data flow result=40 05:20:23 Set A/D channel type result=40 05:20:23 Set A/D encoding result=40 05:20:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:23 Set channel filter=0.000000e+000 result=40 05:20:23 Config A/D Result=40 05:20:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:23 Get A/D filter: -9.255963e+061 result=40 05:20:23 Get A/D value=-858993460 result=40 05:20:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:23 Aux= 05:20:23 Message to Camera, serial 266323 queued 05:21:00 Received message from Master: op=PointingHead serial=266336 05:21:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:21:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:21:00 Point started: ret=0 05:21:00 point_skyscan result=0 05:21:01 Check angles 05:21:01 SkyScan query 05:21:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 05:21:01 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 05:21:01 Check angles 05:21:01 SkyScan query 05:21:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.97<-14998 Statuses=0008 0009 05:21:02 Msec=750 True Az=112.995 Ze=-44.97 Az status=0008 Ze status=0009 05:21:02 Check angles 05:21:02 SkyScan query 05:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 05:21:03 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 05:21:03 Check angles 05:21:03 SkyScan query 05:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 05:21:03 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 05:21:04 Check angles 05:21:04 SkyScan query 05:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.33<-19222 Statuses=0008 0009 05:21:04 Msec=3000 True Az=112.995 Ze=-108.33 Az status=0008 Ze status=0009 05:21:04 Check angles 05:21:04 SkyScan query 05:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.315<-20621 Statuses=0008 0009 05:21:05 Msec=3750 True Az=112.995 Ze=-129.315 Az status=0008 Ze status=0009 05:21:05 Check angles 05:21:05 SkyScan query 05:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 05:21:06 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 05:21:06 Check angles 05:21:06 SkyScan query 05:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0008 0009 05:21:06 Msec=5250 True Az=112.995 Ze=-171.345 Az status=0008 Ze status=0009 05:21:07 Check angles 05:21:07 SkyScan query 05:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:21:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:21:07 Message to Master queued w/err=0: serial=266336 error=0 05:21:12 Received message from Master: op=Filter serial=266337 05:21:12 Color wheel filter change from 0 to 0 05:21:12 FLIGetFilterPos err=0 currentPosition=0 05:21:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:12 Filter is already there-color wheel unchanged 05:21:12 Received message from Master: op=Shutter serial=266338 05:21:12 Shutter LASER open 05:21:13 Received message from Camera: op=State serial=266340 05:21:13 GetSingleValue result=40 Value=cccccccc 05:21:13 SkyScan query 05:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:21:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:13 Parameters OK 05:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:13 Set A/D data flow result=40 05:21:13 Set A/D channel type result=40 05:21:13 Set A/D encoding result=40 05:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:13 Set channel filter=0.000000e+000 result=40 05:21:13 Config A/D Result=40 05:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:13 Get A/D filter: -9.255963e+061 result=40 05:21:13 Get A/D value=-858993460 result=40 05:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:13 Parameters OK 05:21:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:13 Set A/D data flow result=40 05:21:13 Set A/D channel type result=40 05:21:13 Set A/D encoding result=40 05:21:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:13 Set channel filter=0.000000e+000 result=40 05:21:13 Config A/D Result=40 05:21:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:13 Get A/D filter: -9.255963e+061 result=40 05:21:13 Get A/D value=-858993460 result=40 05:21:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:13 Aux= 05:21:13 Message to Camera, serial 266340 queued 05:21:22 Received message from Master: op=Shutter serial=266350 05:21:22 Shutter LASER close 05:21:22 Received message from Master: op=PointingHead serial=266354 05:21:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:21:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:21:22 Point started: ret=0 05:21:22 point_skyscan result=0 05:21:23 Check angles 05:21:23 SkyScan query 05:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 05:21:24 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 05:21:24 Check angles 05:21:24 SkyScan query 05:21:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.305<-20087 Statuses=0008 0009 05:21:24 Msec=750 True Az=112.995 Ze=-121.305 Az status=0008 Ze status=0009 05:21:25 Check angles 05:21:25 SkyScan query 05:21:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.32<-18688 Statuses=0008 0009 05:21:25 Msec=1500 True Az=112.995 Ze=-100.32 Az status=0008 Ze status=0009 05:21:25 Check angles 05:21:25 SkyScan query 05:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 05:21:26 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 05:21:26 Check angles 05:21:26 SkyScan query 05:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 05:21:27 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 05:21:27 Check angles 05:21:27 SkyScan query 05:21:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 05:21:27 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 05:21:28 Check angles 05:21:28 SkyScan query 05:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 05:21:28 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 05:21:28 Check angles 05:21:28 SkyScan query 05:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.365<-11709 Statuses=0008 0009 05:21:29 Msec=5250 True Az=112.995 Ze=4.365 Az status=0008 Ze status=0009 05:21:29 Check angles 05:21:29 SkyScan query 05:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:21:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:21:30 Message to Master queued w/err=0: serial=266354 error=0 05:21:35 Received message from Master: op=Filter serial=266355 05:21:35 Color wheel filter change from 0 to 0 05:21:35 FLIGetFilterPos err=0 currentPosition=0 05:21:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:35 Filter is already there-color wheel unchanged 05:21:35 Received message from Master: op=Shutter serial=266356 05:21:35 Shutter LASER close 05:21:35 Received message from Camera: op=State serial=266358 05:21:35 GetSingleValue result=40 Value=cccccccc 05:21:35 SkyScan query 05:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:21:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:36 Parameters OK 05:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:36 Set A/D data flow result=40 05:21:36 Set A/D channel type result=40 05:21:36 Set A/D encoding result=40 05:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:36 Set channel filter=0.000000e+000 result=40 05:21:36 Config A/D Result=40 05:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:36 Get A/D filter: -9.255963e+061 result=40 05:21:36 Get A/D value=-858993460 result=40 05:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:36 Parameters OK 05:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:36 Set A/D data flow result=40 05:21:36 Set A/D channel type result=40 05:21:36 Set A/D encoding result=40 05:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:36 Set channel filter=0.000000e+000 result=40 05:21:36 Config A/D Result=40 05:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:36 Get A/D filter: -9.255963e+061 result=40 05:21:36 Get A/D value=-858993460 result=40 05:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:36 Aux= 05:21:36 Message to Camera, serial 266358 queued 05:22:13 Received message from Master: op=PointingHead serial=266371 05:22:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:13 Point started: ret=0 05:22:13 point_skyscan result=0 05:22:14 Check angles 05:22:14 SkyScan query 05:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:22:14 Message to Master queued w/err=0: serial=266371 error=0 05:22:19 Received message from Master: op=Filter serial=266372 05:22:19 Color wheel filter change from 0 to 0 05:22:19 FLIGetFilterPos err=0 currentPosition=0 05:22:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:19 Filter is already there-color wheel unchanged 05:22:19 Received message from Master: op=Shutter serial=266373 05:22:19 Shutter LASER close 05:22:19 Received message from Camera: op=State serial=266375 05:22:19 GetSingleValue result=40 Value=cccccccc 05:22:19 SkyScan query 05:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:20 Parameters OK 05:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:20 Set A/D data flow result=40 05:22:20 Set A/D channel type result=40 05:22:20 Set A/D encoding result=40 05:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:20 Set channel filter=0.000000e+000 result=40 05:22:20 Config A/D Result=40 05:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:20 Get A/D filter: -9.255963e+061 result=40 05:22:20 Get A/D value=-858993460 result=40 05:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:20 Parameters OK 05:22:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:20 Set A/D data flow result=40 05:22:20 Set A/D channel type result=40 05:22:20 Set A/D encoding result=40 05:22:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:20 Set channel filter=0.000000e+000 result=40 05:22:20 Config A/D Result=40 05:22:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:20 Get A/D filter: -9.255963e+061 result=40 05:22:20 Get A/D value=-858993460 result=40 05:22:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:20 Aux= 05:22:20 Message to Camera, serial 266375 queued 05:22:56 Received message from Master: op=PointingHead serial=266387 05:22:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:22:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:22:56 Point started: ret=0 05:22:56 point_skyscan result=0 05:22:57 Check angles 05:22:57 SkyScan query 05:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:22:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:22:58 Message to Master queued w/err=0: serial=266387 error=0 05:23:03 Received message from Master: op=Filter serial=266388 05:23:03 Color wheel filter change from 0 to 0 05:23:03 FLIGetFilterPos err=0 currentPosition=0 05:23:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:03 Filter is already there-color wheel unchanged 05:23:03 Received message from Master: op=Shutter serial=266389 05:23:03 Shutter LASER close 05:23:03 Received message from Camera: op=State serial=266391 05:23:03 GetSingleValue result=40 Value=cccccccc 05:23:03 SkyScan query 05:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:03 Parameters OK 05:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:03 Set A/D data flow result=40 05:23:03 Set A/D channel type result=40 05:23:03 Set A/D encoding result=40 05:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:03 Set channel filter=0.000000e+000 result=40 05:23:03 Config A/D Result=40 05:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:03 Get A/D filter: -9.255963e+061 result=40 05:23:03 Get A/D value=-858993460 result=40 05:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:03 Parameters OK 05:23:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:03 Set A/D data flow result=40 05:23:03 Set A/D channel type result=40 05:23:03 Set A/D encoding result=40 05:23:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:03 Set channel filter=0.000000e+000 result=40 05:23:03 Config A/D Result=40 05:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:03 Get A/D filter: -9.255963e+061 result=40 05:23:03 Get A/D value=-858993460 result=40 05:23:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:03 Aux= 05:23:03 Message to Camera, serial 266391 queued 05:23:40 Received message from Master: op=PointingHead serial=266404 05:23:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:23:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:23:40 Point started: ret=0 05:23:40 point_skyscan result=0 05:23:41 Check angles 05:23:41 SkyScan query 05:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:23:42 Message to Master queued w/err=0: serial=266404 error=0 05:23:47 Received message from Master: op=Filter serial=266405 05:23:47 Color wheel filter change from 0 to 0 05:23:47 FLIGetFilterPos err=0 currentPosition=0 05:23:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:47 Filter is already there-color wheel unchanged 05:23:47 Received message from Master: op=Shutter serial=266406 05:23:47 Shutter LASER close 05:23:47 Received message from Camera: op=State serial=266408 05:23:47 GetSingleValue result=40 Value=cccccccc 05:23:47 SkyScan query 05:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:23:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:48 Parameters OK 05:23:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:48 Set A/D data flow result=40 05:23:48 Set A/D channel type result=40 05:23:48 Set A/D encoding result=40 05:23:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:48 Set channel filter=0.000000e+000 result=40 05:23:48 Config A/D Result=40 05:23:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:48 Get A/D filter: -9.255963e+061 result=40 05:23:48 Get A/D value=-858993460 result=40 05:23:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:48 Parameters OK 05:23:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:48 Set A/D data flow result=40 05:23:48 Set A/D channel type result=40 05:23:48 Set A/D encoding result=40 05:23:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:48 Set channel filter=0.000000e+000 result=40 05:23:48 Config A/D Result=40 05:23:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:48 Get A/D filter: -9.255963e+061 result=40 05:23:48 Get A/D value=-858993460 result=40 05:23:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:48 Aux= 05:23:48 Message to Camera, serial 266408 queued [UTC 2019-3-14 05:23:48] 05:24:24 Received message from Master: op=PointingHead serial=266421 05:24:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:24:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:24:25 Point started: ret=0 05:24:25 point_skyscan result=0 05:24:26 Check angles 05:24:26 SkyScan query 05:24:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 05:24:26 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 05:24:26 Check angles 05:24:26 SkyScan query 05:24:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 05:24:27 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 05:24:27 Check angles 05:24:27 SkyScan query 05:24:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 05:24:28 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 05:24:28 Check angles 05:24:28 SkyScan query 05:24:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.31<-17754 Statuses=0008 0009 05:24:28 Msec=2250 True Az=112.995 Ze=-86.31 Az status=0008 Ze status=0009 05:24:29 Check angles 05:24:29 SkyScan query 05:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 05:24:29 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 05:24:29 Check angles 05:24:29 SkyScan query 05:24:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 05:24:30 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 05:24:30 Check angles 05:24:30 SkyScan query 05:24:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 05:24:31 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 05:24:31 Check angles 05:24:31 SkyScan query 05:24:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 05:24:31 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 05:24:32 Check angles 05:24:32 SkyScan query 05:24:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:24:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:24:32 Message to Master queued w/err=0: serial=266421 error=0 05:24:37 Received message from Master: op=Filter serial=266422 05:24:37 Color wheel filter change from 0 to 0 05:24:37 FLIGetFilterPos err=0 currentPosition=0 05:24:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:37 Filter is already there-color wheel unchanged 05:24:37 Received message from Master: op=Shutter serial=266423 05:24:37 Shutter LASER open 05:24:37 Received message from Camera: op=State serial=266425 05:24:37 GetSingleValue result=40 Value=cccccccc 05:24:37 SkyScan query 05:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:38 Parameters OK 05:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:38 Set A/D data flow result=40 05:24:38 Set A/D channel type result=40 05:24:38 Set A/D encoding result=40 05:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:38 Set channel filter=0.000000e+000 result=40 05:24:38 Config A/D Result=40 05:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:38 Get A/D filter: -9.255963e+061 result=40 05:24:38 Get A/D value=-858993460 result=40 05:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:38 Parameters OK 05:24:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:38 Set A/D data flow result=40 05:24:38 Set A/D channel type result=40 05:24:38 Set A/D encoding result=40 05:24:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:38 Set channel filter=0.000000e+000 result=40 05:24:38 Config A/D Result=40 05:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:38 Get A/D filter: -9.255963e+061 result=40 05:24:38 Get A/D value=-858993460 result=40 05:24:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:38 Aux= 05:24:38 Message to Camera, serial 266425 queued 05:24:46 Received message from Master: op=Shutter serial=266435 05:24:46 Shutter LASER close 05:24:47 Received message from Master: op=PointingHead serial=266439 05:24:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:24:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:24:47 Point started: ret=0 05:24:47 point_skyscan result=0 05:24:48 Check angles 05:24:48 SkyScan query 05:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 05:24:49 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 05:24:49 Check angles 05:24:49 SkyScan query 05:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.335<-20089 Statuses=0008 0009 05:24:50 Msec=750 True Az=112.995 Ze=-121.335 Az status=0008 Ze status=0009 05:24:50 Check angles 05:24:50 SkyScan query 05:24:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.395<-18693 Statuses=0008 0009 05:24:50 Msec=1500 True Az=112.995 Ze=-100.395 Az status=0008 Ze status=0009 05:24:50 Check angles 05:24:50 SkyScan query 05:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 05:24:51 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 05:24:51 Check angles 05:24:51 SkyScan query 05:24:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.47<-15898 Statuses=0008 0009 05:24:52 Msec=3000 True Az=112.995 Ze=-58.47 Az status=0008 Ze status=0009 05:24:52 Check angles 05:24:52 SkyScan query 05:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 05:24:53 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 05:24:53 Check angles 05:24:53 SkyScan query 05:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 05:24:53 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 05:24:54 Check angles 05:24:54 SkyScan query 05:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.965<-11669 Statuses=0008 0009 05:24:54 Msec=5250 True Az=112.995 Ze=4.965 Az status=0008 Ze status=0009 05:24:54 Check angles 05:24:54 SkyScan query 05:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:24:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:24:55 Message to Master queued w/err=0: serial=266439 error=0 05:25:00 Received message from Master: op=Filter serial=266440 05:25:00 Color wheel filter change from 0 to 0 05:25:00 FLIGetFilterPos err=0 currentPosition=0 05:25:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:00 Filter is already there-color wheel unchanged 05:25:00 Received message from Master: op=Shutter serial=266441 05:25:00 Shutter LASER close 05:25:00 Received message from Camera: op=State serial=266443 05:25:00 GetSingleValue result=40 Value=cccccccc 05:25:00 SkyScan query 05:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:01 Parameters OK 05:25:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:01 Set A/D data flow result=40 05:25:01 Set A/D channel type result=40 05:25:01 Set A/D encoding result=40 05:25:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:01 Set channel filter=0.000000e+000 result=40 05:25:01 Config A/D Result=40 05:25:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:01 Get A/D filter: -9.255963e+061 result=40 05:25:01 Get A/D value=-858993460 result=40 05:25:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:01 Parameters OK 05:25:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:01 Set A/D data flow result=40 05:25:01 Set A/D channel type result=40 05:25:01 Set A/D encoding result=40 05:25:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:01 Set channel filter=0.000000e+000 result=40 05:25:01 Config A/D Result=40 05:25:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:01 Get A/D filter: -9.255963e+061 result=40 05:25:01 Get A/D value=-858993460 result=40 05:25:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:01 Aux= 05:25:01 Message to Camera, serial 266443 queued 05:25:38 Received message from Master: op=PointingHead serial=266456 05:25:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:25:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:25:38 Point started: ret=0 05:25:38 point_skyscan result=0 05:25:39 Check angles 05:25:39 SkyScan query 05:25:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:25:39 Message to Master queued w/err=0: serial=266456 error=0 05:25:44 Received message from Master: op=Filter serial=266457 05:25:44 Color wheel filter change from 0 to 0 05:25:44 FLIGetFilterPos err=0 currentPosition=0 05:25:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:44 Filter is already there-color wheel unchanged 05:25:44 Received message from Master: op=Shutter serial=266458 05:25:44 Shutter LASER close 05:25:45 Received message from Camera: op=State serial=266460 05:25:45 GetSingleValue result=40 Value=cccccccc 05:25:45 SkyScan query 05:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:25:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:45 Parameters OK 05:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:45 Set A/D data flow result=40 05:25:45 Set A/D channel type result=40 05:25:45 Set A/D encoding result=40 05:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:45 Set channel filter=0.000000e+000 result=40 05:25:45 Config A/D Result=40 05:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:45 Get A/D filter: -9.255963e+061 result=40 05:25:45 Get A/D value=-858993460 result=40 05:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:45 Parameters OK 05:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:45 Set A/D data flow result=40 05:25:45 Set A/D channel type result=40 05:25:45 Set A/D encoding result=40 05:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:45 Set channel filter=0.000000e+000 result=40 05:25:45 Config A/D Result=40 05:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:45 Get A/D filter: -9.255963e+061 result=40 05:25:45 Get A/D value=-858993460 result=40 05:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:45 Aux= 05:25:45 Message to Camera, serial 266460 queued 05:26:21 Received message from Master: op=PointingHead serial=266472 05:26:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:26:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:26:21 Point started: ret=0 05:26:21 point_skyscan result=0 05:26:22 Check angles 05:26:22 SkyScan query 05:26:23 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 05:26:23 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 05:26:23 Check angles 05:26:23 SkyScan query 05:26:23 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 05:26:23 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 05:26:24 Check angles 05:26:24 SkyScan query 05:26:24 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 05:26:24 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 05:26:24 Check angles 05:26:24 SkyScan query 05:26:25 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 05:26:25 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 05:26:25 Message to Master queued w/err=0: serial=266472 error=0 05:26:30 Received message from Master: op=Filter serial=266473 05:26:30 Color wheel filter change from 0 to 0 05:26:30 FLIGetFilterPos err=0 currentPosition=0 05:26:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:30 Filter is already there-color wheel unchanged 05:26:30 Received message from Master: op=Shutter serial=266474 05:26:30 Shutter LASER close 05:26:30 Received message from Camera: op=State serial=266476 05:26:30 GetSingleValue result=40 Value=cccccccc 05:26:30 SkyScan query 05:26:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:31 Parameters OK 05:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:31 Set A/D data flow result=40 05:26:31 Set A/D channel type result=40 05:26:31 Set A/D encoding result=40 05:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:31 Set channel filter=0.000000e+000 result=40 05:26:31 Config A/D Result=40 05:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:31 Get A/D filter: -9.255963e+061 result=40 05:26:31 Get A/D value=-858993460 result=40 05:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:31 Parameters OK 05:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:31 Set A/D data flow result=40 05:26:31 Set A/D channel type result=40 05:26:31 Set A/D encoding result=40 05:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:31 Set channel filter=0.000000e+000 result=40 05:26:31 Config A/D Result=40 05:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:31 Get A/D filter: -9.255963e+061 result=40 05:26:31 Get A/D value=-858993460 result=40 05:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:31 Aux= 05:26:31 Message to Camera, serial 266476 queued 05:27:08 Received message from Master: op=PointingHead serial=266489 05:27:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:27:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:27:08 Point started: ret=0 05:27:08 point_skyscan result=0 05:27:09 Check angles 05:27:09 SkyScan query 05:27:09 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 05:27:09 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 05:27:09 Check angles 05:27:09 SkyScan query 05:27:10 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 05:27:10 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 05:27:10 Check angles 05:27:10 SkyScan query 05:27:11 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 05:27:11 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 05:27:11 Check angles 05:27:11 SkyScan query 05:27:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:27:11 Message to Master queued w/err=0: serial=266489 error=0 05:27:16 Received message from Master: op=Filter serial=266490 05:27:16 Color wheel filter change from 0 to 0 05:27:16 FLIGetFilterPos err=0 currentPosition=0 05:27:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:16 Filter is already there-color wheel unchanged 05:27:17 Received message from Master: op=Shutter serial=266491 05:27:17 Shutter LASER close 05:27:17 Received message from Camera: op=State serial=266493 05:27:17 GetSingleValue result=40 Value=cccccccc 05:27:17 SkyScan query 05:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:27:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:17 Parameters OK 05:27:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:17 Set A/D data flow result=40 05:27:17 Set A/D channel type result=40 05:27:17 Set A/D encoding result=40 05:27:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:17 Set channel filter=0.000000e+000 result=40 05:27:17 Config A/D Result=40 05:27:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:17 Get A/D filter: -9.255963e+061 result=40 05:27:17 Get A/D value=-858993460 result=40 05:27:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:17 Parameters OK 05:27:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:17 Set A/D data flow result=40 05:27:17 Set A/D channel type result=40 05:27:17 Set A/D encoding result=40 05:27:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:17 Set channel filter=0.000000e+000 result=40 05:27:17 Config A/D Result=40 05:27:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:17 Get A/D filter: -9.255963e+061 result=40 05:27:17 Get A/D value=-858993460 result=40 05:27:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:17 Aux= 05:27:17 Message to Camera, serial 266493 queued 05:27:54 Received message from Master: op=PointingHead serial=266506 05:27:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:27:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:27:55 Point started: ret=0 05:27:55 point_skyscan result=0 05:27:55 Check angles 05:27:55 SkyScan query 05:27:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 05:27:56 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 05:27:56 Check angles 05:27:56 SkyScan query 05:27:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 05:27:57 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 05:27:57 Check angles 05:27:57 SkyScan query 05:27:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 05:27:57 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 05:27:58 Check angles 05:27:58 SkyScan query 05:27:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 05:27:58 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 05:27:58 Check angles 05:27:58 SkyScan query 05:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 05:27:59 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 05:27:59 Check angles 05:27:59 SkyScan query 05:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 05:28:00 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 05:28:00 Check angles 05:28:00 SkyScan query 05:28:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.565<-21971 Statuses=0008 0009 05:28:00 Msec=4500 True Az=112.995 Ze=-149.565 Az status=0008 Ze status=0009 05:28:01 Check angles 05:28:01 SkyScan query 05:28:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.49<-23366 Statuses=0008 0009 05:28:01 Msec=5250 True Az=112.995 Ze=-170.49 Az status=0008 Ze status=0009 05:28:01 Check angles 05:28:01 SkyScan query 05:28:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:28:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:28:02 Message to Master queued w/err=0: serial=266506 error=0 05:28:07 Received message from Master: op=Filter serial=266507 05:28:07 Color wheel filter change from 0 to 0 05:28:07 FLIGetFilterPos err=0 currentPosition=0 05:28:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:07 Filter is already there-color wheel unchanged 05:28:07 Received message from Master: op=Shutter serial=266508 05:28:07 Shutter LASER open 05:28:07 Received message from Camera: op=State serial=266510 05:28:07 GetSingleValue result=40 Value=cccccccc 05:28:07 SkyScan query 05:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:08 Parameters OK 05:28:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:08 Set A/D data flow result=40 05:28:08 Set A/D channel type result=40 05:28:08 Set A/D encoding result=40 05:28:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:08 Set channel filter=0.000000e+000 result=40 05:28:08 Config A/D Result=40 05:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:08 Get A/D filter: -9.255963e+061 result=40 05:28:08 Get A/D value=-858993460 result=40 05:28:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:08 Parameters OK 05:28:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:08 Set A/D data flow result=40 05:28:08 Set A/D channel type result=40 05:28:08 Set A/D encoding result=40 05:28:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:08 Set channel filter=0.000000e+000 result=40 05:28:08 Config A/D Result=40 05:28:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:08 Get A/D filter: -9.255963e+061 result=40 05:28:08 Get A/D value=-858993460 result=40 05:28:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:08 Aux= 05:28:08 Message to Camera, serial 266510 queued 05:28:16 Received message from Master: op=Shutter serial=266520 05:28:16 Shutter LASER close 05:28:17 Received message from Master: op=PointingHead serial=266524 05:28:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:28:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:28:17 Point started: ret=0 05:28:17 point_skyscan result=0 05:28:18 Check angles 05:28:18 SkyScan query 05:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 05:28:18 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 05:28:19 Check angles 05:28:19 SkyScan query 05:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 05:28:19 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 05:28:19 Check angles 05:28:19 SkyScan query 05:28:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 05:28:20 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 05:28:20 Check angles 05:28:20 SkyScan query 05:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 05:28:21 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 05:28:21 Check angles 05:28:21 SkyScan query 05:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 05:28:21 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 05:28:22 Check angles 05:28:22 SkyScan query 05:28:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 05:28:22 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 05:28:22 Check angles 05:28:22 SkyScan query 05:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 05:28:23 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 05:28:23 Check angles 05:28:23 SkyScan query 05:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 05:28:24 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 05:28:24 Check angles 05:28:24 SkyScan query 05:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:28:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:28:24 Message to Master queued w/err=0: serial=266524 error=0 05:28:29 Received message from Master: op=Filter serial=266525 05:28:29 Color wheel filter change from 0 to 0 05:28:29 FLIGetFilterPos err=0 currentPosition=0 05:28:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:29 Filter is already there-color wheel unchanged 05:28:30 Received message from Master: op=Shutter serial=266526 05:28:30 Shutter LASER close 05:28:30 Received message from Camera: op=State serial=266528 05:28:30 GetSingleValue result=40 Value=cccccccc 05:28:30 SkyScan query 05:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:28:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:30 Parameters OK 05:28:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:30 Set A/D data flow result=40 05:28:30 Set A/D channel type result=40 05:28:30 Set A/D encoding result=40 05:28:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:30 Set channel filter=0.000000e+000 result=40 05:28:30 Config A/D Result=40 05:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:30 Get A/D filter: -9.255963e+061 result=40 05:28:30 Get A/D value=-858993460 result=40 05:28:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:30 Parameters OK 05:28:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:30 Set A/D data flow result=40 05:28:30 Set A/D channel type result=40 05:28:30 Set A/D encoding result=40 05:28:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:30 Set channel filter=0.000000e+000 result=40 05:28:30 Config A/D Result=40 05:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:30 Get A/D filter: -9.255963e+061 result=40 05:28:30 Get A/D value=-858993460 result=40 05:28:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:30 Aux= 05:28:30 Message to Camera, serial 266528 queued 05:29:07 Received message from Master: op=PointingHead serial=266541 05:29:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:07 Point started: ret=0 05:29:07 point_skyscan result=0 05:29:08 Check angles 05:29:08 SkyScan query 05:29:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:09 Message to Master queued w/err=0: serial=266541 error=0 05:29:14 Received message from Master: op=Filter serial=266542 05:29:14 Color wheel filter change from 0 to 0 05:29:14 FLIGetFilterPos err=0 currentPosition=0 05:29:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:14 Filter is already there-color wheel unchanged 05:29:14 Received message from Master: op=Shutter serial=266543 05:29:14 Shutter LASER close 05:29:14 Received message from Camera: op=State serial=266545 05:29:14 GetSingleValue result=40 Value=cccccccc 05:29:14 SkyScan query 05:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:15 Parameters OK 05:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:15 Set A/D data flow result=40 05:29:15 Set A/D channel type result=40 05:29:15 Set A/D encoding result=40 05:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:15 Set channel filter=0.000000e+000 result=40 05:29:15 Config A/D Result=40 05:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:15 Get A/D filter: -9.255963e+061 result=40 05:29:15 Get A/D value=-858993460 result=40 05:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:15 Parameters OK 05:29:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:15 Set A/D data flow result=40 05:29:15 Set A/D channel type result=40 05:29:15 Set A/D encoding result=40 05:29:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:15 Set channel filter=0.000000e+000 result=40 05:29:15 Config A/D Result=40 05:29:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:15 Get A/D filter: -9.255963e+061 result=40 05:29:15 Get A/D value=-858993460 result=40 05:29:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:15 Aux= 05:29:15 Message to Camera, serial 266545 queued 05:29:51 Received message from Master: op=PointingHead serial=266558 05:29:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:29:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:29:52 Point started: ret=0 05:29:52 point_skyscan result=0 05:29:53 Check angles 05:29:53 SkyScan query 05:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:29:53 Message to Master queued w/err=0: serial=266558 error=0 05:29:58 Received message from Master: op=Filter serial=266559 05:29:58 Color wheel filter change from 0 to 0 05:29:58 FLIGetFilterPos err=0 currentPosition=0 05:29:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:58 Filter is already there-color wheel unchanged 05:29:58 Received message from Master: op=Shutter serial=266560 05:29:58 Shutter LASER close 05:29:58 Received message from Camera: op=State serial=266562 05:29:58 GetSingleValue result=40 Value=cccccccc 05:29:58 SkyScan query 05:29:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:29:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:59 Parameters OK 05:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:59 Set A/D data flow result=40 05:29:59 Set A/D channel type result=40 05:29:59 Set A/D encoding result=40 05:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:59 Set channel filter=0.000000e+000 result=40 05:29:59 Config A/D Result=40 05:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:59 Get A/D filter: -9.255963e+061 result=40 05:29:59 Get A/D value=-858993460 result=40 05:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:59 Parameters OK 05:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:59 Set A/D data flow result=40 05:29:59 Set A/D channel type result=40 05:29:59 Set A/D encoding result=40 05:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:59 Set channel filter=0.000000e+000 result=40 05:29:59 Config A/D Result=40 05:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:59 Get A/D filter: -9.255963e+061 result=40 05:29:59 Get A/D value=-858993460 result=40 05:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:59 Aux= 05:29:59 Message to Camera, serial 266562 queued 05:30:36 Received message from Master: op=PointingHead serial=266575 05:30:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:30:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:30:36 Point started: ret=0 05:30:36 point_skyscan result=0 05:30:37 Check angles 05:30:37 SkyScan query 05:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:30:37 Message to Master queued w/err=0: serial=266575 error=0 05:30:42 Received message from Master: op=Filter serial=266576 05:30:42 Color wheel filter change from 0 to 0 05:30:42 FLIGetFilterPos err=0 currentPosition=0 05:30:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:42 Filter is already there-color wheel unchanged 05:30:43 Received message from Master: op=Shutter serial=266577 05:30:43 Shutter LASER close 05:30:43 Received message from Camera: op=State serial=266579 05:30:43 GetSingleValue result=40 Value=cccccccc 05:30:43 SkyScan query 05:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:30:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:43 Parameters OK 05:30:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:43 Set A/D data flow result=40 05:30:43 Set A/D channel type result=40 05:30:43 Set A/D encoding result=40 05:30:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:43 Set channel filter=0.000000e+000 result=40 05:30:43 Config A/D Result=40 05:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:43 Get A/D filter: -9.255963e+061 result=40 05:30:43 Get A/D value=-858993460 result=40 05:30:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:43 Parameters OK 05:30:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:43 Set A/D data flow result=40 05:30:43 Set A/D channel type result=40 05:30:43 Set A/D encoding result=40 05:30:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:43 Set channel filter=0.000000e+000 result=40 05:30:43 Config A/D Result=40 05:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:43 Get A/D filter: -9.255963e+061 result=40 05:30:43 Get A/D value=-858993460 result=40 05:30:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:43 Aux= 05:30:43 Message to Camera, serial 266579 queued 05:31:20 Received message from Master: op=PointingHead serial=266592 05:31:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:31:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:31:20 Point started: ret=0 05:31:20 point_skyscan result=0 05:31:21 Check angles 05:31:21 SkyScan query 05:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 05:31:22 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 05:31:22 Check angles 05:31:22 SkyScan query 05:31:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.24<-15016 Statuses=0008 0009 05:31:22 Msec=750 True Az=112.995 Ze=-45.24 Az status=0008 Ze status=0009 05:31:23 Check angles 05:31:23 SkyScan query 05:31:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 05:31:23 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 05:31:23 Check angles 05:31:23 SkyScan query 05:31:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.12<-17808 Statuses=0008 0009 05:31:24 Msec=2250 True Az=112.995 Ze=-87.12 Az status=0008 Ze status=0009 05:31:24 Check angles 05:31:24 SkyScan query 05:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 05:31:25 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 05:31:25 Check angles 05:31:25 SkyScan query 05:31:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.465<-20631 Statuses=0008 0009 05:31:25 Msec=3750 True Az=112.995 Ze=-129.465 Az status=0008 Ze status=0009 05:31:26 Check angles 05:31:26 SkyScan query 05:31:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 05:31:26 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 05:31:26 Check angles 05:31:26 SkyScan query 05:31:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 05:31:27 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 05:31:27 Check angles 05:31:27 SkyScan query 05:31:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:31:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:31:28 Message to Master queued w/err=0: serial=266592 error=0 05:31:33 Received message from Master: op=Filter serial=266593 05:31:33 Color wheel filter change from 0 to 0 05:31:33 FLIGetFilterPos err=0 currentPosition=0 05:31:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:33 Filter is already there-color wheel unchanged 05:31:33 Received message from Master: op=Shutter serial=266594 05:31:33 Shutter LASER open 05:31:33 Received message from Camera: op=State serial=266596 05:31:33 GetSingleValue result=40 Value=cccccccc 05:31:33 SkyScan query 05:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:31:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:34 Parameters OK 05:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:34 Set A/D data flow result=40 05:31:34 Set A/D channel type result=40 05:31:34 Set A/D encoding result=40 05:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:34 Set channel filter=0.000000e+000 result=40 05:31:34 Config A/D Result=40 05:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:34 Get A/D filter: -9.255963e+061 result=40 05:31:34 Get A/D value=-858993460 result=40 05:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:34 Parameters OK 05:31:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:34 Set A/D data flow result=40 05:31:34 Set A/D channel type result=40 05:31:34 Set A/D encoding result=40 05:31:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:34 Set channel filter=0.000000e+000 result=40 05:31:34 Config A/D Result=40 05:31:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:34 Get A/D filter: -9.255963e+061 result=40 05:31:34 Get A/D value=-858993460 result=40 05:31:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:34 Aux= 05:31:34 Message to Camera, serial 266596 queued 05:31:42 Received message from Master: op=Shutter serial=266606 05:31:42 Shutter LASER close 05:31:43 Received message from Master: op=PointingHead serial=266610 05:31:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:31:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:31:43 Point started: ret=0 05:31:43 point_skyscan result=0 05:31:44 Check angles 05:31:44 SkyScan query 05:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 05:31:44 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 05:31:45 Check angles 05:31:45 SkyScan query 05:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 05:31:45 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 05:31:45 Check angles 05:31:45 SkyScan query 05:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 05:31:46 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 05:31:46 Check angles 05:31:46 SkyScan query 05:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 05:31:47 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 05:31:47 Check angles 05:31:47 SkyScan query 05:31:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 05:31:47 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 05:31:48 Check angles 05:31:48 SkyScan query 05:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.215<-14481 Statuses=0008 0009 05:31:48 Msec=3750 True Az=112.995 Ze=-37.215 Az status=0008 Ze status=0009 05:31:48 Check angles 05:31:48 SkyScan query 05:31:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.795<-13053 Statuses=0008 0009 05:31:49 Msec=4500 True Az=112.995 Ze=-15.795 Az status=0008 Ze status=0009 05:31:49 Check angles 05:31:49 SkyScan query 05:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.89<-11674 Statuses=0008 0009 05:31:50 Msec=5250 True Az=112.995 Ze=4.89 Az status=0008 Ze status=0009 05:31:50 Check angles 05:31:50 SkyScan query 05:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:31:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:31:50 Message to Master queued w/err=0: serial=266610 error=0 05:31:55 Received message from Master: op=Filter serial=266611 05:31:55 Color wheel filter change from 0 to 0 05:31:55 FLIGetFilterPos err=0 currentPosition=0 05:31:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:55 Filter is already there-color wheel unchanged 05:31:56 Received message from Master: op=Shutter serial=266612 05:31:56 Shutter LASER close 05:31:56 Received message from Camera: op=State serial=266614 05:31:56 GetSingleValue result=40 Value=cccccccc 05:31:56 SkyScan query 05:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:56 Parameters OK 05:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:56 Set A/D data flow result=40 05:31:56 Set A/D channel type result=40 05:31:56 Set A/D encoding result=40 05:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:56 Set channel filter=0.000000e+000 result=40 05:31:56 Config A/D Result=40 05:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:56 Get A/D filter: -9.255963e+061 result=40 05:31:56 Get A/D value=-858993460 result=40 05:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:56 Parameters OK 05:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:56 Set A/D data flow result=40 05:31:56 Set A/D channel type result=40 05:31:56 Set A/D encoding result=40 05:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:56 Set channel filter=0.000000e+000 result=40 05:31:56 Config A/D Result=40 05:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:56 Get A/D filter: -9.255963e+061 result=40 05:31:56 Get A/D value=-858993460 result=40 05:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:56 Aux= 05:31:56 Message to Camera, serial 266614 queued 05:32:33 Received message from Master: op=PointingHead serial=266627 05:32:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:32:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:32:34 Point started: ret=0 05:32:34 point_skyscan result=0 05:32:34 Check angles 05:32:34 SkyScan query 05:32:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:32:35 Message to Master queued w/err=0: serial=266627 error=0 05:32:40 Received message from Master: op=Filter serial=266628 05:32:40 Color wheel filter change from 0 to 0 05:32:40 FLIGetFilterPos err=0 currentPosition=0 05:32:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:40 Filter is already there-color wheel unchanged 05:32:40 Received message from Master: op=Shutter serial=266629 05:32:40 Shutter LASER close 05:32:40 Received message from Camera: op=State serial=266631 05:32:40 GetSingleValue result=40 Value=cccccccc 05:32:40 SkyScan query 05:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:32:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:41 Parameters OK 05:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:41 Set A/D data flow result=40 05:32:41 Set A/D channel type result=40 05:32:41 Set A/D encoding result=40 05:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:41 Set channel filter=0.000000e+000 result=40 05:32:41 Config A/D Result=40 05:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:41 Get A/D filter: -9.255963e+061 result=40 05:32:41 Get A/D value=-858993460 result=40 05:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:41 Parameters OK 05:32:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:41 Set A/D data flow result=40 05:32:41 Set A/D channel type result=40 05:32:41 Set A/D encoding result=40 05:32:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:41 Set channel filter=0.000000e+000 result=40 05:32:41 Config A/D Result=40 05:32:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:41 Get A/D filter: -9.255963e+061 result=40 05:32:41 Get A/D value=-858993460 result=40 05:32:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:41 Aux= 05:32:41 Message to Camera, serial 266631 queued 05:33:18 Received message from Master: op=PointingHead serial=266644 05:33:18 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:33:18 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:33:18 Point started: ret=0 05:33:18 point_skyscan result=0 05:33:19 Check angles 05:33:19 SkyScan query 05:33:19 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 05:33:19 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 05:33:19 Check angles 05:33:19 SkyScan query 05:33:20 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 05:33:20 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 05:33:20 Check angles 05:33:20 SkyScan query 05:33:21 SkyScan query done: ret=0 az=171.06<-11404 ze=-6.495<-12433 Statuses=0009 0008 05:33:21 Msec=1500 True Az=171.06 Ze=-6.495 Az status=0009 Ze status=0008 05:33:21 Check angles 05:33:21 SkyScan query 05:33:21 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 05:33:21 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 05:33:21 Message to Master queued w/err=0: serial=266644 error=0 05:33:26 Received message from Master: op=Filter serial=266645 05:33:26 Color wheel filter change from 0 to 0 05:33:26 FLIGetFilterPos err=0 currentPosition=0 05:33:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:26 Filter is already there-color wheel unchanged 05:33:27 Received message from Master: op=Shutter serial=266646 05:33:27 Shutter LASER close 05:33:27 Received message from Camera: op=State serial=266648 05:33:27 GetSingleValue result=40 Value=cccccccc 05:33:27 SkyScan query 05:33:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:33:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:27 Parameters OK 05:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:27 Set A/D data flow result=40 05:33:27 Set A/D channel type result=40 05:33:27 Set A/D encoding result=40 05:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:27 Set channel filter=0.000000e+000 result=40 05:33:27 Config A/D Result=40 05:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:27 Get A/D filter: -9.255963e+061 result=40 05:33:27 Get A/D value=-858993460 result=40 05:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:27 Parameters OK 05:33:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:27 Set A/D data flow result=40 05:33:27 Set A/D channel type result=40 05:33:27 Set A/D encoding result=40 05:33:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:27 Set channel filter=0.000000e+000 result=40 05:33:27 Config A/D Result=40 05:33:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:27 Get A/D filter: -9.255963e+061 result=40 05:33:27 Get A/D value=-858993460 result=40 05:33:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:27 Aux= 05:33:27 Message to Camera, serial 266648 queued 05:33:35 Received message from Master: op=Identify serial=266649 05:34:04 Received message from Master: op=PointingHead serial=266664 05:34:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:34:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:34:04 Point started: ret=0 05:34:04 point_skyscan result=0 05:34:05 Check angles 05:34:05 SkyScan query 05:34:06 SkyScan query done: ret=0 az=152.505<-10167 ze=6.51<-11566 Statuses=0009 0008 05:34:06 Msec=0 True Az=152.505 Ze=6.51 Az status=0009 Ze status=0008 05:34:06 Check angles 05:34:06 SkyScan query 05:34:07 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 05:34:07 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 05:34:07 Check angles 05:34:07 SkyScan query 05:34:07 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 05:34:07 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 05:34:07 Check angles 05:34:07 SkyScan query 05:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:34:08 Message to Master queued w/err=0: serial=266664 error=0 05:34:13 Received message from Master: op=Filter serial=266665 05:34:13 Color wheel filter change from 0 to 0 05:34:13 FLIGetFilterPos err=0 currentPosition=0 05:34:13 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:13 Filter is already there-color wheel unchanged 05:34:13 Received message from Master: op=Shutter serial=266666 05:34:13 Shutter LASER close 05:34:13 Received message from Camera: op=State serial=266668 05:34:13 GetSingleValue result=40 Value=cccccccc 05:34:13 SkyScan query 05:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:34:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:14 Parameters OK 05:34:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:14 Set A/D data flow result=40 05:34:14 Set A/D channel type result=40 05:34:14 Set A/D encoding result=40 05:34:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:14 Set channel filter=0.000000e+000 result=40 05:34:14 Config A/D Result=40 05:34:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:14 Get A/D filter: -9.255963e+061 result=40 05:34:14 Get A/D value=-858993460 result=40 05:34:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:14 Parameters OK 05:34:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:14 Set A/D data flow result=40 [UTC 2019-3-14 05:34:14] 05:34:14 Set A/D channel type result=40 05:34:14 Set A/D encoding result=40 05:34:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:14 Set channel filter=0.000000e+000 result=40 05:34:14 Config A/D Result=40 05:34:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:14 Get A/D filter: -9.255963e+061 result=40 05:34:14 Get A/D value=-858993460 result=40 05:34:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:14 Aux= 05:34:14 Message to Camera, serial 266668 queued 05:34:51 Received message from Master: op=PointingHead serial=266681 05:34:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:34:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:34:51 Point started: ret=0 05:34:51 point_skyscan result=0 05:34:52 Check angles 05:34:52 SkyScan query 05:34:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 05:34:52 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 05:34:53 Check angles 05:34:53 SkyScan query 05:34:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 05:34:53 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 05:34:53 Check angles 05:34:53 SkyScan query 05:34:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 05:34:54 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 05:34:54 Check angles 05:34:54 SkyScan query 05:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.045<-17803 Statuses=0008 0009 05:34:55 Msec=2250 True Az=112.995 Ze=-87.045 Az status=0008 Ze status=0009 05:34:55 Check angles 05:34:55 SkyScan query 05:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 05:34:55 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 05:34:56 Check angles 05:34:56 SkyScan query 05:34:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 05:34:56 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 05:34:56 Check angles 05:34:56 SkyScan query 05:34:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 05:34:57 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 05:34:57 Check angles 05:34:57 SkyScan query 05:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.79<-23386 Statuses=0008 0009 05:34:58 Msec=5250 True Az=112.995 Ze=-170.79 Az status=0008 Ze status=0009 05:34:58 Check angles 05:34:58 SkyScan query 05:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:34:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:34:58 Message to Master queued w/err=0: serial=266681 error=0 05:35:03 Received message from Master: op=Filter serial=266682 05:35:03 Color wheel filter change from 0 to 0 05:35:03 FLIGetFilterPos err=0 currentPosition=0 05:35:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:03 Filter is already there-color wheel unchanged 05:35:04 Received message from Master: op=Shutter serial=266683 05:35:04 Shutter LASER open 05:35:04 Received message from Camera: op=State serial=266685 05:35:04 GetSingleValue result=40 Value=cccccccc 05:35:04 SkyScan query 05:35:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:35:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:04 Parameters OK 05:35:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:04 Set A/D data flow result=40 05:35:04 Set A/D channel type result=40 05:35:04 Set A/D encoding result=40 05:35:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:04 Set channel filter=0.000000e+000 result=40 05:35:04 Config A/D Result=40 05:35:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:04 Get A/D filter: -9.255963e+061 result=40 05:35:04 Get A/D value=-858993460 result=40 05:35:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:04 Parameters OK 05:35:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:04 Set A/D data flow result=40 05:35:04 Set A/D channel type result=40 05:35:04 Set A/D encoding result=40 05:35:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:04 Set channel filter=0.000000e+000 result=40 05:35:04 Config A/D Result=40 05:35:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:04 Get A/D filter: -9.255963e+061 result=40 05:35:04 Get A/D value=-858993460 result=40 05:35:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:04 Aux= 05:35:04 Message to Camera, serial 266685 queued 05:35:13 Received message from Master: op=Shutter serial=266695 05:35:13 Shutter LASER close 05:35:13 Received message from Master: op=PointingHead serial=266699 05:35:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:35:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:35:14 Point started: ret=0 05:35:14 point_skyscan result=0 05:35:14 Check angles 05:35:14 SkyScan query 05:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 05:35:15 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 05:35:15 Check angles 05:35:15 SkyScan query 05:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.98<-20132 Statuses=0008 0009 05:35:16 Msec=750 True Az=112.995 Ze=-121.98 Az status=0008 Ze status=0009 05:35:16 Check angles 05:35:16 SkyScan query 05:35:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 05:35:16 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 05:35:17 Check angles 05:35:17 SkyScan query 05:35:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 05:35:17 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 05:35:17 Check angles 05:35:17 SkyScan query 05:35:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 05:35:18 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 05:35:18 Check angles 05:35:18 SkyScan query 05:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 05:35:19 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 05:35:19 Check angles 05:35:19 SkyScan query 05:35:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.74<-13116 Statuses=0008 0009 05:35:19 Msec=4500 True Az=112.995 Ze=-16.74 Az status=0008 Ze status=0009 05:35:20 Check angles 05:35:20 SkyScan query 05:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 05:35:20 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 05:35:20 Check angles 05:35:20 SkyScan query 05:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:35:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:35:21 Message to Master queued w/err=0: serial=266699 error=0 05:35:26 Received message from Master: op=Filter serial=266700 05:35:26 Color wheel filter change from 0 to 0 05:35:26 FLIGetFilterPos err=0 currentPosition=0 05:35:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:26 Filter is already there-color wheel unchanged 05:35:26 Received message from Master: op=Shutter serial=266701 05:35:26 Shutter LASER close 05:35:26 Received message from Camera: op=State serial=266703 05:35:26 GetSingleValue result=40 Value=cccccccc 05:35:26 SkyScan query 05:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:35:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:27 Parameters OK 05:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:27 Set A/D data flow result=40 05:35:27 Set A/D channel type result=40 05:35:27 Set A/D encoding result=40 05:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:27 Set channel filter=0.000000e+000 result=40 05:35:27 Config A/D Result=40 05:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:27 Get A/D filter: -9.255963e+061 result=40 05:35:27 Get A/D value=-858993460 result=40 05:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:27 Parameters OK 05:35:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:27 Set A/D data flow result=40 05:35:27 Set A/D channel type result=40 05:35:27 Set A/D encoding result=40 05:35:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:27 Set channel filter=0.000000e+000 result=40 05:35:27 Config A/D Result=40 05:35:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:27 Get A/D filter: -9.255963e+061 result=40 05:35:27 Get A/D value=-858993460 result=40 05:35:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:27 Aux= 05:35:27 Message to Camera, serial 266703 queued 05:36:04 Received message from Master: op=PointingHead serial=266716 05:36:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:04 Point started: ret=0 05:36:04 point_skyscan result=0 05:36:05 Check angles 05:36:05 SkyScan query 05:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:05 Message to Master queued w/err=0: serial=266716 error=0 05:36:10 Received message from Master: op=Filter serial=266717 05:36:10 Color wheel filter change from 0 to 0 05:36:10 FLIGetFilterPos err=0 currentPosition=0 05:36:10 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:10 Filter is already there-color wheel unchanged 05:36:11 Received message from Master: op=Shutter serial=266718 05:36:11 Shutter LASER close 05:36:11 Received message from Camera: op=State serial=266720 05:36:11 GetSingleValue result=40 Value=cccccccc 05:36:11 SkyScan query 05:36:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:11 Parameters OK 05:36:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:11 Set A/D data flow result=40 05:36:11 Set A/D channel type result=40 05:36:11 Set A/D encoding result=40 05:36:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:11 Set channel filter=0.000000e+000 result=40 05:36:11 Config A/D Result=40 05:36:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:11 Get A/D filter: -9.255963e+061 result=40 05:36:11 Get A/D value=-858993460 result=40 05:36:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:11 Parameters OK 05:36:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:11 Set A/D data flow result=40 05:36:11 Set A/D channel type result=40 05:36:11 Set A/D encoding result=40 05:36:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:11 Set channel filter=0.000000e+000 result=40 05:36:11 Config A/D Result=40 05:36:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:11 Get A/D filter: -9.255963e+061 result=40 05:36:11 Get A/D value=-858993460 result=40 05:36:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:11 Aux= 05:36:11 Message to Camera, serial 266720 queued 05:36:48 Received message from Master: op=PointingHead serial=266733 05:36:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:36:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:36:48 Point started: ret=0 05:36:48 point_skyscan result=0 05:36:49 Check angles 05:36:49 SkyScan query 05:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:36:50 Message to Master queued w/err=0: serial=266733 error=0 05:36:55 Received message from Master: op=Filter serial=266734 05:36:55 Color wheel filter change from 0 to 0 05:36:55 FLIGetFilterPos err=0 currentPosition=0 05:36:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:55 Filter is already there-color wheel unchanged 05:36:55 Received message from Master: op=Shutter serial=266735 05:36:55 Shutter LASER close 05:36:55 Received message from Camera: op=State serial=266737 05:36:55 GetSingleValue result=40 Value=cccccccc 05:36:55 SkyScan query 05:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:36:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:55 Parameters OK 05:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:55 Set A/D data flow result=40 05:36:55 Set A/D channel type result=40 05:36:55 Set A/D encoding result=40 05:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:55 Set channel filter=0.000000e+000 result=40 05:36:55 Config A/D Result=40 05:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:55 Get A/D filter: -9.255963e+061 result=40 05:36:55 Get A/D value=-858993460 result=40 05:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:55 Parameters OK 05:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:55 Set A/D data flow result=40 05:36:55 Set A/D channel type result=40 05:36:55 Set A/D encoding result=40 05:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:55 Set channel filter=0.000000e+000 result=40 05:36:55 Config A/D Result=40 05:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:55 Get A/D filter: -9.255963e+061 result=40 05:36:55 Get A/D value=-858993460 result=40 05:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:55 Aux= 05:36:55 Message to Camera, serial 266737 queued 05:37:32 Received message from Master: op=PointingHead serial=266750 05:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:37:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:37:33 Point started: ret=0 05:37:33 point_skyscan result=0 05:37:33 Check angles 05:37:33 SkyScan query 05:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:37:34 Message to Master queued w/err=0: serial=266750 error=0 05:37:39 Received message from Master: op=Filter serial=266751 05:37:39 Color wheel filter change from 0 to 0 05:37:39 FLIGetFilterPos err=0 currentPosition=0 05:37:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:39 Filter is already there-color wheel unchanged 05:37:39 Received message from Master: op=Shutter serial=266752 05:37:39 Shutter LASER close 05:37:39 Received message from Camera: op=State serial=266754 05:37:39 GetSingleValue result=40 Value=cccccccc 05:37:39 SkyScan query 05:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:37:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:40 Parameters OK 05:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:40 Set A/D data flow result=40 05:37:40 Set A/D channel type result=40 05:37:40 Set A/D encoding result=40 05:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:40 Set channel filter=0.000000e+000 result=40 05:37:40 Config A/D Result=40 05:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:40 Get A/D filter: -9.255963e+061 result=40 05:37:40 Get A/D value=-858993460 result=40 05:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:40 Parameters OK 05:37:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:40 Set A/D data flow result=40 05:37:40 Set A/D channel type result=40 05:37:40 Set A/D encoding result=40 05:37:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:40 Set channel filter=0.000000e+000 result=40 05:37:40 Config A/D Result=40 05:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:40 Get A/D filter: -9.255963e+061 result=40 05:37:40 Get A/D value=-858993460 result=40 05:37:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:40 Aux= 05:37:40 Message to Camera, serial 266754 queued 05:38:17 Received message from Master: op=PointingHead serial=266767 05:38:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:38:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:38:17 Point started: ret=0 05:38:17 point_skyscan result=0 05:38:18 Check angles 05:38:18 SkyScan query 05:38:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 05:38:18 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 05:38:19 Check angles 05:38:19 SkyScan query 05:38:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.03<-15002 Statuses=0008 0009 05:38:19 Msec=750 True Az=112.995 Ze=-45.03 Az status=0008 Ze status=0009 05:38:19 Check angles 05:38:19 SkyScan query 05:38:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.465<-16431 Statuses=0008 0009 05:38:20 Msec=1500 True Az=112.995 Ze=-66.465 Az status=0008 Ze status=0009 05:38:20 Check angles 05:38:20 SkyScan query 05:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.435<-17829 Statuses=0008 0009 05:38:21 Msec=2250 True Az=112.995 Ze=-87.435 Az status=0008 Ze status=0009 05:38:21 Check angles 05:38:21 SkyScan query 05:38:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.39<-19226 Statuses=0008 0009 05:38:21 Msec=3000 True Az=112.995 Ze=-108.39 Az status=0008 Ze status=0009 05:38:22 Check angles 05:38:22 SkyScan query 05:38:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.33<-20622 Statuses=0008 0009 05:38:22 Msec=3750 True Az=112.995 Ze=-129.33 Az status=0008 Ze status=0009 05:38:22 Check angles 05:38:22 SkyScan query 05:38:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 05:38:23 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 05:38:23 Check angles 05:38:23 SkyScan query 05:38:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.075<-23405 Statuses=0008 0009 05:38:24 Msec=5250 True Az=112.995 Ze=-171.075 Az status=0008 Ze status=0009 05:38:24 Check angles 05:38:24 SkyScan query 05:38:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:38:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:38:24 Message to Master queued w/err=0: serial=266767 error=0 05:38:29 Received message from Master: op=Filter serial=266768 05:38:29 Color wheel filter change from 0 to 0 05:38:29 FLIGetFilterPos err=0 currentPosition=0 05:38:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:29 Filter is already there-color wheel unchanged 05:38:30 Received message from Master: op=Shutter serial=266769 05:38:30 Shutter LASER open 05:38:30 Received message from Camera: op=State serial=266771 05:38:30 GetSingleValue result=40 Value=cccccccc 05:38:30 SkyScan query 05:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:38:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:30 Parameters OK 05:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:30 Set A/D data flow result=40 05:38:30 Set A/D channel type result=40 05:38:30 Set A/D encoding result=40 05:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:30 Set channel filter=0.000000e+000 result=40 05:38:30 Config A/D Result=40 05:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:30 Get A/D filter: -9.255963e+061 result=40 05:38:30 Get A/D value=-858993460 result=40 05:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:30 Parameters OK 05:38:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:30 Set A/D data flow result=40 05:38:30 Set A/D channel type result=40 05:38:30 Set A/D encoding result=40 05:38:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:30 Set channel filter=0.000000e+000 result=40 05:38:30 Config A/D Result=40 05:38:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:30 Get A/D filter: -9.255963e+061 result=40 05:38:30 Get A/D value=-858993460 result=40 05:38:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:30 Aux= 05:38:30 Message to Camera, serial 266771 queued 05:38:39 Received message from Master: op=Shutter serial=266781 05:38:39 Shutter LASER close 05:38:39 Received message from Master: op=PointingHead serial=266785 05:38:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:38:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:38:40 Point started: ret=0 05:38:40 point_skyscan result=0 05:38:40 Check angles 05:38:40 SkyScan query 05:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 05:38:41 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 05:38:41 Check angles 05:38:41 SkyScan query 05:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 05:38:42 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 05:38:42 Check angles 05:38:42 SkyScan query 05:38:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 05:38:42 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 05:38:43 Check angles 05:38:43 SkyScan query 05:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 05:38:43 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 05:38:43 Check angles 05:38:43 SkyScan query 05:38:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 05:38:44 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 05:38:44 Check angles 05:38:44 SkyScan query 05:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 05:38:45 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 05:38:45 Check angles 05:38:45 SkyScan query 05:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 05:38:45 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 05:38:46 Check angles 05:38:46 SkyScan query 05:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=3.585<-11761 Statuses=0008 0009 05:38:46 Msec=5250 True Az=112.995 Ze=3.585 Az status=0008 Ze status=0009 05:38:46 Check angles 05:38:46 SkyScan query 05:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:38:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:38:47 Message to Master queued w/err=0: serial=266785 error=0 05:38:52 Received message from Master: op=Filter serial=266786 05:38:52 Color wheel filter change from 0 to 0 05:38:52 FLIGetFilterPos err=0 currentPosition=0 05:38:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:52 Filter is already there-color wheel unchanged 05:38:52 Received message from Master: op=Shutter serial=266787 05:38:52 Shutter LASER close 05:38:52 Received message from Camera: op=State serial=266789 05:38:52 GetSingleValue result=40 Value=cccccccc 05:38:52 SkyScan query 05:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:38:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:53 Parameters OK 05:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:53 Set A/D data flow result=40 05:38:53 Set A/D channel type result=40 05:38:53 Set A/D encoding result=40 05:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:53 Set channel filter=0.000000e+000 result=40 05:38:53 Config A/D Result=40 05:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:53 Get A/D filter: -9.255963e+061 result=40 05:38:53 Get A/D value=-858993460 result=40 05:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:53 Parameters OK 05:38:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:53 Set A/D data flow result=40 05:38:53 Set A/D channel type result=40 05:38:53 Set A/D encoding result=40 05:38:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:53 Set channel filter=0.000000e+000 result=40 05:38:53 Config A/D Result=40 05:38:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:53 Get A/D filter: -9.255963e+061 result=40 05:38:53 Get A/D value=-858993460 result=40 05:38:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:53 Aux= 05:38:53 Message to Camera, serial 266789 queued 05:39:30 Received message from Master: op=PointingHead serial=266802 05:39:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:39:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:39:30 Point started: ret=0 05:39:30 point_skyscan result=0 05:39:31 Check angles 05:39:31 SkyScan query 05:39:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:39:31 Message to Master queued w/err=0: serial=266802 error=0 05:39:36 Received message from Master: op=Filter serial=266803 05:39:36 Color wheel filter change from 0 to 0 05:39:36 FLIGetFilterPos err=0 currentPosition=0 05:39:36 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:36 Filter is already there-color wheel unchanged 05:39:37 Received message from Master: op=Shutter serial=266804 05:39:37 Shutter LASER close 05:39:37 Received message from Camera: op=State serial=266806 05:39:37 GetSingleValue result=40 Value=cccccccc 05:39:37 SkyScan query 05:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:37 Parameters OK 05:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:37 Set A/D data flow result=40 05:39:37 Set A/D channel type result=40 05:39:37 Set A/D encoding result=40 05:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:37 Set channel filter=0.000000e+000 result=40 05:39:37 Config A/D Result=40 05:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:37 Get A/D filter: -9.255963e+061 result=40 05:39:37 Get A/D value=-858993460 result=40 05:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:37 Parameters OK 05:39:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:37 Set A/D data flow result=40 05:39:37 Set A/D channel type result=40 05:39:37 Set A/D encoding result=40 05:39:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:37 Set channel filter=0.000000e+000 result=40 05:39:37 Config A/D Result=40 05:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:37 Get A/D filter: -9.255963e+061 result=40 05:39:37 Get A/D value=-858993460 result=40 05:39:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:37 Aux= 05:39:37 Message to Camera, serial 266806 queued 05:40:14 Received message from Master: op=PointingHead serial=266819 05:40:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:40:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:40:14 Point started: ret=0 05:40:14 point_skyscan result=0 05:40:15 Check angles 05:40:15 SkyScan query 05:40:16 SkyScan query done: ret=0 az=136.005<-9067 ze=-6.51<-12434 Statuses=0009 0008 05:40:16 Msec=0 True Az=136.005 Ze=-6.51 Az status=0009 Ze status=0008 05:40:16 Check angles 05:40:16 SkyScan query 05:40:16 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 05:40:16 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 05:40:17 Check angles 05:40:17 SkyScan query 05:40:17 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 05:40:17 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 05:40:17 Check angles 05:40:17 SkyScan query 05:40:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 05:40:18 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 05:40:18 Message to Master queued w/err=0: serial=266819 error=0 05:40:23 Received message from Master: op=Filter serial=266820 05:40:23 Color wheel filter change from 0 to 0 05:40:23 FLIGetFilterPos err=0 currentPosition=0 05:40:23 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:23 Filter is already there-color wheel unchanged 05:40:23 Received message from Master: op=Shutter serial=266821 05:40:23 Shutter LASER close 05:40:23 Received message from Camera: op=State serial=266823 05:40:23 GetSingleValue result=40 Value=cccccccc 05:40:23 SkyScan query 05:40:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:40:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:24 Parameters OK 05:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:24 Set A/D data flow result=40 05:40:24 Set A/D channel type result=40 05:40:24 Set A/D encoding result=40 05:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:24 Set channel filter=0.000000e+000 result=40 05:40:24 Config A/D Result=40 05:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:24 Get A/D filter: -9.255963e+061 result=40 05:40:24 Get A/D value=-858993460 result=40 05:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:24 Parameters OK 05:40:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:24 Set A/D data flow result=40 05:40:24 Set A/D channel type result=40 05:40:24 Set A/D encoding result=40 05:40:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:24 Set channel filter=0.000000e+000 result=40 05:40:24 Config A/D Result=40 05:40:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:24 Get A/D filter: -9.255963e+061 result=40 05:40:24 Get A/D value=-858993460 result=40 05:40:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:24 Aux= 05:40:24 Message to Camera, serial 266823 queued 05:41:01 Received message from Master: op=PointingHead serial=266836 05:41:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:41:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:41:01 Point started: ret=0 05:41:01 point_skyscan result=0 05:41:02 Check angles 05:41:02 SkyScan query 05:41:02 SkyScan query done: ret=0 az=153.075<-10205 ze=6.51<-11566 Statuses=0009 0008 05:41:02 Msec=0 True Az=153.075 Ze=6.51 Az status=0009 Ze status=0008 05:41:02 Check angles 05:41:02 SkyScan query 05:41:03 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 05:41:03 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 05:41:03 Check angles 05:41:03 SkyScan query 05:41:04 SkyScan query done: ret=0 az=117.795<-7853 ze=6.495<-11567 Statuses=0009 0008 05:41:04 Msec=1500 True Az=117.795 Ze=6.495 Az status=0009 Ze status=0008 05:41:04 Check angles 05:41:04 SkyScan query 05:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:41:04 Message to Master queued w/err=0: serial=266836 error=0 05:41:09 Received message from Master: op=Filter serial=266837 05:41:09 Color wheel filter change from 0 to 0 05:41:09 FLIGetFilterPos err=0 currentPosition=0 05:41:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:09 Filter is already there-color wheel unchanged 05:41:10 Received message from Master: op=Shutter serial=266838 05:41:10 Shutter LASER close 05:41:10 Received message from Camera: op=State serial=266840 05:41:10 GetSingleValue result=40 Value=cccccccc 05:41:10 SkyScan query 05:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:41:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:10 Parameters OK 05:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:10 Set A/D data flow result=40 05:41:10 Set A/D channel type result=40 05:41:10 Set A/D encoding result=40 05:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:10 Set channel filter=0.000000e+000 result=40 05:41:10 Config A/D Result=40 05:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:10 Get A/D filter: -9.255963e+061 result=40 05:41:10 Get A/D value=-858993460 result=40 05:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:10 Parameters OK 05:41:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:10 Set A/D data flow result=40 05:41:10 Set A/D channel type result=40 05:41:10 Set A/D encoding result=40 05:41:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:10 Set channel filter=0.000000e+000 result=40 05:41:10 Config A/D Result=40 05:41:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:10 Get A/D filter: -9.255963e+061 result=40 05:41:10 Get A/D value=-858993460 result=40 05:41:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:10 Aux= 05:41:10 Message to Camera, serial 266840 queued 05:41:47 Received message from Master: op=PointingHead serial=266853 05:41:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:41:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:41:48 Point started: ret=0 05:41:48 point_skyscan result=0 05:41:48 Check angles 05:41:48 SkyScan query 05:41:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 05:41:49 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 05:41:49 Check angles 05:41:49 SkyScan query 05:41:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 05:41:50 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 05:41:50 Check angles 05:41:50 SkyScan query 05:41:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 05:41:50 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 05:41:51 Check angles 05:41:51 SkyScan query 05:41:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 05:41:51 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 05:41:51 Check angles 05:41:51 SkyScan query 05:41:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.25<-19150 Statuses=0008 0009 05:41:52 Msec=3000 True Az=112.995 Ze=-107.25 Az status=0008 Ze status=0009 05:41:52 Check angles 05:41:52 SkyScan query 05:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 05:41:53 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 05:41:53 Check angles 05:41:53 SkyScan query 05:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 05:41:53 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 05:41:54 Check angles 05:41:54 SkyScan query 05:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 05:41:54 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 05:41:54 Check angles 05:41:54 SkyScan query 05:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:41:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:41:55 Message to Master queued w/err=0: serial=266853 error=0 05:42:00 Received message from Master: op=Filter serial=266854 05:42:00 Color wheel filter change from 0 to 0 05:42:00 FLIGetFilterPos err=0 currentPosition=0 05:42:00 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:00 Filter is already there-color wheel unchanged 05:42:00 Received message from Master: op=Shutter serial=266855 05:42:00 Shutter LASER open 05:42:00 Received message from Camera: op=State serial=266857 05:42:00 GetSingleValue result=40 Value=cccccccc 05:42:00 SkyScan query 05:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:01 Parameters OK 05:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:01 Set A/D data flow result=40 05:42:01 Set A/D channel type result=40 05:42:01 Set A/D encoding result=40 05:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:01 Set channel filter=0.000000e+000 result=40 05:42:01 Config A/D Result=40 05:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:01 Get A/D filter: -9.255963e+061 result=40 05:42:01 Get A/D value=-858993460 result=40 05:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:01 Parameters OK 05:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:01 Set A/D data flow result=40 05:42:01 Set A/D channel type result=40 05:42:01 Set A/D encoding result=40 05:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:01 Set channel filter=0.000000e+000 result=40 05:42:01 Config A/D Result=40 05:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:01 Get A/D filter: -9.255963e+061 result=40 05:42:01 Get A/D value=-858993460 result=40 05:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:01 Aux= 05:42:01 Message to Camera, serial 266857 queued 05:42:09 Received message from Master: op=Shutter serial=266867 05:42:09 Shutter LASER close 05:42:10 Received message from Master: op=PointingHead serial=266871 05:42:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:42:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:42:10 Point started: ret=0 05:42:10 point_skyscan result=0 05:42:11 Check angles 05:42:11 SkyScan query 05:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.38<-21492 Statuses=0008 0009 05:42:11 Msec=0 True Az=112.995 Ze=-142.38 Az status=0008 Ze status=0009 05:42:12 Check angles 05:42:12 SkyScan query 05:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 05:42:12 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 05:42:12 Check angles 05:42:12 SkyScan query 05:42:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.77<-18718 Statuses=0008 0009 05:42:13 Msec=1500 True Az=112.995 Ze=-100.77 Az status=0008 Ze status=0009 05:42:13 Check angles 05:42:13 SkyScan query 05:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-78.93<-17262 Statuses=0008 0009 05:42:14 Msec=2250 True Az=112.995 Ze=-78.93 Az status=0008 Ze status=0009 05:42:14 Check angles 05:42:14 SkyScan query 05:42:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.38<-15892 Statuses=0008 0009 05:42:14 Msec=3000 True Az=112.995 Ze=-58.38 Az status=0008 Ze status=0009 05:42:15 Check angles 05:42:15 SkyScan query 05:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.455<-14497 Statuses=0008 0009 05:42:15 Msec=3750 True Az=112.995 Ze=-37.455 Az status=0008 Ze status=0009 05:42:15 Check angles 05:42:15 SkyScan query 05:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.065<-13071 Statuses=0008 0009 05:42:16 Msec=4500 True Az=112.995 Ze=-16.065 Az status=0008 Ze status=0009 05:42:16 Check angles 05:42:16 SkyScan query 05:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=5.01<-11666 Statuses=0008 0009 05:42:17 Msec=5250 True Az=112.995 Ze=5.01 Az status=0008 Ze status=0009 05:42:17 Check angles 05:42:17 SkyScan query 05:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:42:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:42:17 Message to Master queued w/err=0: serial=266871 error=0 05:42:22 Received message from Master: op=Filter serial=266872 05:42:22 Color wheel filter change from 0 to 0 05:42:22 FLIGetFilterPos err=0 currentPosition=0 05:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:22 Filter is already there-color wheel unchanged 05:42:23 Received message from Master: op=Shutter serial=266873 05:42:23 Shutter LASER close 05:42:23 Received message from Camera: op=State serial=266875 05:42:23 GetSingleValue result=40 Value=cccccccc 05:42:23 SkyScan query 05:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:23 Parameters OK 05:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:23 Set A/D data flow result=40 05:42:23 Set A/D channel type result=40 05:42:23 Set A/D encoding result=40 05:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:23 Set channel filter=0.000000e+000 result=40 05:42:23 Config A/D Result=40 05:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:23 Get A/D filter: -9.255963e+061 result=40 05:42:23 Get A/D value=-858993460 result=40 05:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:23 Parameters OK 05:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:23 Set A/D data flow result=40 05:42:23 Set A/D channel type result=40 05:42:23 Set A/D encoding result=40 05:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:23 Set channel filter=0.000000e+000 result=40 05:42:23 Config A/D Result=40 05:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:23 Get A/D filter: -9.255963e+061 result=40 05:42:23 Get A/D value=-858993460 result=40 05:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:23 Aux= 05:42:23 Message to Camera, serial 266875 queued 05:43:00 Received message from Master: op=PointingHead serial=266888 05:43:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:43:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:43:01 Point started: ret=0 05:43:01 point_skyscan result=0 05:43:01 Check angles 05:43:01 SkyScan query 05:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:02 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:43:02 Message to Master queued w/err=0: serial=266888 error=0 05:43:07 Received message from Master: op=Filter serial=266889 05:43:07 Color wheel filter change from 0 to 0 05:43:07 FLIGetFilterPos err=0 currentPosition=0 05:43:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:07 Filter is already there-color wheel unchanged 05:43:07 Received message from Master: op=Shutter serial=266890 05:43:07 Shutter LASER close 05:43:07 Received message from Camera: op=State serial=266892 05:43:07 GetSingleValue result=40 Value=cccccccc 05:43:07 SkyScan query 05:43:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:08 Parameters OK 05:43:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:08 Set A/D data flow result=40 05:43:08 Set A/D channel type result=40 05:43:08 Set A/D encoding result=40 05:43:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:08 Set channel filter=0.000000e+000 result=40 05:43:08 Config A/D Result=40 05:43:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:08 Get A/D filter: -9.255963e+061 result=40 05:43:08 Get A/D value=-858993460 result=40 05:43:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:08 Parameters OK 05:43:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:08 Set A/D data flow result=40 05:43:08 Set A/D channel type result=40 05:43:08 Set A/D encoding result=40 05:43:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:08 Set channel filter=0.000000e+000 result=40 05:43:08 Config A/D Result=40 05:43:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:08 Get A/D filter: -9.255963e+061 result=40 05:43:08 Get A/D value=-858993460 result=40 05:43:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:08 Aux= 05:43:08 Message to Camera, serial 266892 queued 05:43:45 Received message from Master: op=PointingHead serial=266905 05:43:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:43:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:43:45 Point started: ret=0 05:43:45 point_skyscan result=0 05:43:46 Check angles 05:43:46 SkyScan query 05:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:43:46 Message to Master queued w/err=0: serial=266905 error=0 [UTC 2019-3-14 05:43:48] 05:43:51 Received message from Master: op=Filter serial=266906 05:43:51 Color wheel filter change from 0 to 0 05:43:51 FLIGetFilterPos err=0 currentPosition=0 05:43:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:51 Filter is already there-color wheel unchanged 05:43:51 Received message from Master: op=Shutter serial=266907 05:43:51 Shutter LASER close 05:43:51 Received message from Camera: op=State serial=266909 05:43:51 GetSingleValue result=40 Value=cccccccc 05:43:51 SkyScan query 05:43:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:43:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:52 Parameters OK 05:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:52 Set A/D data flow result=40 05:43:52 Set A/D channel type result=40 05:43:52 Set A/D encoding result=40 05:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:52 Set channel filter=0.000000e+000 result=40 05:43:52 Config A/D Result=40 05:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:52 Get A/D filter: -9.255963e+061 result=40 05:43:52 Get A/D value=-858993460 result=40 05:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:52 Parameters OK 05:43:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:52 Set A/D data flow result=40 05:43:52 Set A/D channel type result=40 05:43:52 Set A/D encoding result=40 05:43:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:52 Set channel filter=0.000000e+000 result=40 05:43:52 Config A/D Result=40 05:43:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:52 Get A/D filter: -9.255963e+061 result=40 05:43:52 Get A/D value=-858993460 result=40 05:43:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:52 Aux= 05:43:52 Message to Camera, serial 266909 queued 05:44:29 Received message from Master: op=PointingHead serial=266922 05:44:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:44:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:44:29 Point started: ret=0 05:44:29 point_skyscan result=0 05:44:30 Check angles 05:44:30 SkyScan query 05:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:44:30 Message to Master queued w/err=0: serial=266922 error=0 05:44:35 Received message from Master: op=Filter serial=266923 05:44:35 Color wheel filter change from 0 to 0 05:44:35 FLIGetFilterPos err=0 currentPosition=0 05:44:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:35 Filter is already there-color wheel unchanged 05:44:36 Received message from Master: op=Shutter serial=266924 05:44:36 Shutter LASER close 05:44:36 Received message from Camera: op=State serial=266926 05:44:36 GetSingleValue result=40 Value=cccccccc 05:44:36 SkyScan query 05:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:44:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:36 Parameters OK 05:44:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:36 Set A/D data flow result=40 05:44:36 Set A/D channel type result=40 05:44:36 Set A/D encoding result=40 05:44:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:36 Set channel filter=0.000000e+000 result=40 05:44:36 Config A/D Result=40 05:44:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:36 Get A/D filter: -9.255963e+061 result=40 05:44:36 Get A/D value=-858993460 result=40 05:44:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:36 Parameters OK 05:44:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:36 Set A/D data flow result=40 05:44:36 Set A/D channel type result=40 05:44:36 Set A/D encoding result=40 05:44:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:36 Set channel filter=0.000000e+000 result=40 05:44:36 Config A/D Result=40 05:44:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:36 Get A/D filter: -9.255963e+061 result=40 05:44:36 Get A/D value=-858993460 result=40 05:44:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:36 Aux= 05:44:36 Message to Camera, serial 266926 queued 05:45:13 Received message from Master: op=PointingHead serial=266939 05:45:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:45:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:45:13 Point started: ret=0 05:45:13 point_skyscan result=0 05:45:14 Check angles 05:45:14 SkyScan query 05:45:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 05:45:15 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 05:45:15 Check angles 05:45:15 SkyScan query 05:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.91<-14994 Statuses=0008 0009 05:45:16 Msec=750 True Az=112.995 Ze=-44.91 Az status=0008 Ze status=0009 05:45:16 Check angles 05:45:16 SkyScan query 05:45:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 05:45:16 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 05:45:16 Check angles 05:45:16 SkyScan query 05:45:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.3<-17820 Statuses=0008 0009 05:45:17 Msec=2250 True Az=112.995 Ze=-87.3 Az status=0008 Ze status=0009 05:45:17 Check angles 05:45:17 SkyScan query 05:45:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.66<-19244 Statuses=0008 0009 05:45:18 Msec=3000 True Az=112.995 Ze=-108.66 Az status=0008 Ze status=0009 05:45:18 Check angles 05:45:18 SkyScan query 05:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-130.035<-20669 Statuses=0008 0009 05:45:19 Msec=3750 True Az=112.995 Ze=-130.035 Az status=0008 Ze status=0009 05:45:19 Check angles 05:45:19 SkyScan query 05:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.96<-22064 Statuses=0008 0009 05:45:19 Msec=4500 True Az=112.995 Ze=-150.96 Az status=0008 Ze status=0009 05:45:20 Check angles 05:45:20 SkyScan query 05:45:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.585<-23439 Statuses=0008 0009 05:45:20 Msec=5250 True Az=112.995 Ze=-171.585 Az status=0008 Ze status=0009 05:45:20 Check angles 05:45:20 SkyScan query 05:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:45:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:45:21 Message to Master queued w/err=0: serial=266939 error=0 05:45:26 Received message from Master: op=Filter serial=266940 05:45:26 Color wheel filter change from 0 to 0 05:45:26 FLIGetFilterPos err=0 currentPosition=0 05:45:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:26 Filter is already there-color wheel unchanged 05:45:26 Received message from Master: op=Shutter serial=266941 05:45:26 Shutter LASER open 05:45:26 Received message from Camera: op=State serial=266943 05:45:26 GetSingleValue result=40 Value=cccccccc 05:45:26 SkyScan query 05:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:45:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:27 Parameters OK 05:45:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:27 Set A/D data flow result=40 05:45:27 Set A/D channel type result=40 05:45:27 Set A/D encoding result=40 05:45:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:27 Set channel filter=0.000000e+000 result=40 05:45:27 Config A/D Result=40 05:45:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:27 Get A/D filter: -9.255963e+061 result=40 05:45:27 Get A/D value=-858993460 result=40 05:45:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:27 Parameters OK 05:45:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:27 Set A/D data flow result=40 05:45:27 Set A/D channel type result=40 05:45:27 Set A/D encoding result=40 05:45:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:27 Set channel filter=0.000000e+000 result=40 05:45:27 Config A/D Result=40 05:45:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:27 Get A/D filter: -9.255963e+061 result=40 05:45:27 Get A/D value=-858993460 result=40 05:45:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:27 Aux= 05:45:27 Message to Camera, serial 266943 queued 05:45:35 Received message from Master: op=Shutter serial=266953 05:45:35 Shutter LASER close 05:45:36 Received message from Master: op=PointingHead serial=266957 05:45:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:45:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:45:36 Point started: ret=0 05:45:36 point_skyscan result=0 05:45:37 Check angles 05:45:37 SkyScan query 05:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 05:45:38 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 05:45:38 Check angles 05:45:38 SkyScan query 05:45:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 05:45:38 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 05:45:38 Check angles 05:45:38 SkyScan query 05:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 05:45:39 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 05:45:39 Check angles 05:45:39 SkyScan query 05:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.905<-17327 Statuses=0008 0009 05:45:40 Msec=2250 True Az=112.995 Ze=-79.905 Az status=0008 Ze status=0009 05:45:40 Check angles 05:45:40 SkyScan query 05:45:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 05:45:41 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 05:45:41 Check angles 05:45:41 SkyScan query 05:45:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 05:45:41 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 05:45:41 Check angles 05:45:41 SkyScan query 05:45:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 05:45:42 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 05:45:42 Check angles 05:45:42 SkyScan query 05:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.975<-11735 Statuses=0008 0009 05:45:43 Msec=5250 True Az=112.995 Ze=3.975 Az status=0008 Ze status=0009 05:45:43 Check angles 05:45:43 SkyScan query 05:45:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:45:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:45:44 Message to Master queued w/err=0: serial=266957 error=0 05:45:49 Received message from Master: op=Filter serial=266958 05:45:49 Color wheel filter change from 0 to 0 05:45:49 FLIGetFilterPos err=0 currentPosition=0 05:45:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:49 Filter is already there-color wheel unchanged 05:45:49 Received message from Master: op=Shutter serial=266959 05:45:49 Shutter LASER close 05:45:49 Received message from Camera: op=State serial=266961 05:45:49 GetSingleValue result=40 Value=cccccccc 05:45:49 SkyScan query 05:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:45:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:49 Parameters OK 05:45:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:49 Set A/D data flow result=40 05:45:49 Set A/D channel type result=40 05:45:49 Set A/D encoding result=40 05:45:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:49 Set channel filter=0.000000e+000 result=40 05:45:49 Config A/D Result=40 05:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:49 Get A/D filter: -9.255963e+061 result=40 05:45:49 Get A/D value=-858993460 result=40 05:45:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:49 Parameters OK 05:45:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:49 Set A/D data flow result=40 05:45:49 Set A/D channel type result=40 05:45:49 Set A/D encoding result=40 05:45:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:49 Set channel filter=0.000000e+000 result=40 05:45:49 Config A/D Result=40 05:45:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:49 Get A/D filter: -9.255963e+061 result=40 05:45:49 Get A/D value=-858993460 result=40 05:45:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:49 Aux= 05:45:49 Message to Camera, serial 266961 queued 05:46:26 Received message from Master: op=PointingHead serial=266974 05:46:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:46:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:46:27 Point started: ret=0 05:46:27 point_skyscan result=0 05:46:27 Check angles 05:46:27 SkyScan query 05:46:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:46:28 Message to Master queued w/err=0: serial=266974 error=0 05:46:33 Received message from Master: op=Filter serial=266975 05:46:33 Color wheel filter change from 0 to 0 05:46:33 FLIGetFilterPos err=0 currentPosition=0 05:46:33 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:33 Filter is already there-color wheel unchanged 05:46:33 Received message from Master: op=Shutter serial=266976 05:46:33 Shutter LASER close 05:46:33 Received message from Camera: op=State serial=266978 05:46:33 GetSingleValue result=40 Value=cccccccc 05:46:33 SkyScan query 05:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:46:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:34 Parameters OK 05:46:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:34 Set A/D data flow result=40 05:46:34 Set A/D channel type result=40 05:46:34 Set A/D encoding result=40 05:46:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:34 Set channel filter=0.000000e+000 result=40 05:46:34 Config A/D Result=40 05:46:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:34 Get A/D filter: -9.255963e+061 result=40 05:46:34 Get A/D value=-858993460 result=40 05:46:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:34 Parameters OK 05:46:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:34 Set A/D data flow result=40 05:46:34 Set A/D channel type result=40 05:46:34 Set A/D encoding result=40 05:46:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:34 Set channel filter=0.000000e+000 result=40 05:46:34 Config A/D Result=40 05:46:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:34 Get A/D filter: -9.255963e+061 result=40 05:46:34 Get A/D value=-858993460 result=40 05:46:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:34 Aux= 05:46:34 Message to Camera, serial 266978 queued 05:47:11 Received message from Master: op=PointingHead serial=266991 05:47:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:47:11 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:47:11 Point started: ret=0 05:47:11 point_skyscan result=0 05:47:12 Check angles 05:47:12 SkyScan query 05:47:12 SkyScan query done: ret=0 az=135.795<-9053 ze=-6.51<-12434 Statuses=0009 0008 05:47:12 Msec=0 True Az=135.795 Ze=-6.51 Az status=0009 Ze status=0008 05:47:12 Check angles 05:47:12 SkyScan query 05:47:13 SkyScan query done: ret=0 az=153.285<-10219 ze=-6.495<-12433 Statuses=0009 0008 05:47:13 Msec=750 True Az=153.285 Ze=-6.495 Az status=0009 Ze status=0008 05:47:13 Check angles 05:47:13 SkyScan query 05:47:14 SkyScan query done: ret=0 az=170.745<-11383 ze=-6.495<-12433 Statuses=0009 0008 05:47:14 Msec=1500 True Az=170.745 Ze=-6.495 Az status=0009 Ze status=0008 05:47:14 Check angles 05:47:14 SkyScan query 05:47:14 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 05:47:14 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 05:47:14 Message to Master queued w/err=0: serial=266991 error=0 05:47:19 Received message from Master: op=Filter serial=266992 05:47:19 Color wheel filter change from 0 to 0 05:47:19 FLIGetFilterPos err=0 currentPosition=0 05:47:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:19 Filter is already there-color wheel unchanged 05:47:20 Received message from Master: op=Shutter serial=266993 05:47:20 Shutter LASER close 05:47:20 Received message from Camera: op=State serial=266995 05:47:20 GetSingleValue result=40 Value=cccccccc 05:47:20 SkyScan query 05:47:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:47:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:20 Parameters OK 05:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:20 Set A/D data flow result=40 05:47:20 Set A/D channel type result=40 05:47:20 Set A/D encoding result=40 05:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:20 Set channel filter=0.000000e+000 result=40 05:47:20 Config A/D Result=40 05:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:20 Get A/D filter: -9.255963e+061 result=40 05:47:20 Get A/D value=-858993460 result=40 05:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:20 Parameters OK 05:47:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:20 Set A/D data flow result=40 05:47:20 Set A/D channel type result=40 05:47:20 Set A/D encoding result=40 05:47:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:20 Set channel filter=0.000000e+000 result=40 05:47:20 Config A/D Result=40 05:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:20 Get A/D filter: -9.255963e+061 result=40 05:47:20 Get A/D value=-858993460 result=40 05:47:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:20 Aux= 05:47:20 Message to Camera, serial 266995 queued 05:47:57 Received message from Master: op=PointingHead serial=267008 05:47:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:47:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:47:57 Point started: ret=0 05:47:57 point_skyscan result=0 05:47:58 Check angles 05:47:58 SkyScan query 05:47:59 SkyScan query done: ret=0 az=153.21<-10214 ze=6.51<-11566 Statuses=0009 0008 05:47:59 Msec=0 True Az=153.21 Ze=6.51 Az status=0009 Ze status=0008 05:47:59 Check angles 05:47:59 SkyScan query 05:48:00 SkyScan query done: ret=0 az=135.81<-9054 ze=6.495<-11567 Statuses=0009 0008 05:48:00 Msec=750 True Az=135.81 Ze=6.495 Az status=0009 Ze status=0008 05:48:00 Check angles 05:48:00 SkyScan query 05:48:00 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 05:48:00 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 05:48:01 Check angles 05:48:01 SkyScan query 05:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:01 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:48:01 Message to Master queued w/err=0: serial=267008 error=0 05:48:06 Received message from Master: op=Filter serial=267009 05:48:06 Color wheel filter change from 0 to 0 05:48:06 FLIGetFilterPos err=0 currentPosition=0 05:48:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:06 Filter is already there-color wheel unchanged 05:48:06 Received message from Master: op=Shutter serial=267010 05:48:06 Shutter LASER close 05:48:06 Received message from Camera: op=State serial=267012 05:48:06 GetSingleValue result=40 Value=cccccccc 05:48:06 SkyScan query 05:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:48:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:07 Parameters OK 05:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:07 Set A/D data flow result=40 05:48:07 Set A/D channel type result=40 05:48:07 Set A/D encoding result=40 05:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:07 Set channel filter=0.000000e+000 result=40 05:48:07 Config A/D Result=40 05:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:07 Get A/D filter: -9.255963e+061 result=40 05:48:07 Get A/D value=-858993460 result=40 05:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:07 Parameters OK 05:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:07 Set A/D data flow result=40 05:48:07 Set A/D channel type result=40 05:48:07 Set A/D encoding result=40 05:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:07 Set channel filter=0.000000e+000 result=40 05:48:07 Config A/D Result=40 05:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:07 Get A/D filter: -9.255963e+061 result=40 05:48:07 Get A/D value=-858993460 result=40 05:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:07 Aux= 05:48:07 Message to Camera, serial 267012 queued 05:48:44 Received message from Master: op=PointingHead serial=267025 05:48:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:48:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:48:44 Point started: ret=0 05:48:44 point_skyscan result=0 05:48:45 Check angles 05:48:45 SkyScan query 05:48:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 05:48:45 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 05:48:46 Check angles 05:48:46 SkyScan query 05:48:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 05:48:46 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 05:48:46 Check angles 05:48:46 SkyScan query 05:48:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 05:48:47 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 05:48:47 Check angles 05:48:47 SkyScan query 05:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 05:48:48 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 05:48:48 Check angles 05:48:48 SkyScan query 05:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 05:48:48 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 05:48:49 Check angles 05:48:49 SkyScan query 05:48:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 05:48:49 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 05:48:49 Check angles 05:48:49 SkyScan query 05:48:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 05:48:50 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 05:48:50 Check angles 05:48:50 SkyScan query 05:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.935<-23329 Statuses=0008 0009 05:48:51 Msec=5250 True Az=112.995 Ze=-169.935 Az status=0008 Ze status=0009 05:48:51 Check angles 05:48:51 SkyScan query 05:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:48:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:48:51 Message to Master queued w/err=0: serial=267025 error=0 05:48:56 Received message from Master: op=Filter serial=267026 05:48:56 Color wheel filter change from 0 to 0 05:48:56 FLIGetFilterPos err=0 currentPosition=0 05:48:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:56 Filter is already there-color wheel unchanged 05:48:57 Received message from Master: op=Shutter serial=267027 05:48:57 Shutter LASER open 05:48:57 Received message from Camera: op=State serial=267029 05:48:57 GetSingleValue result=40 Value=cccccccc 05:48:57 SkyScan query 05:48:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:57 Parameters OK 05:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:57 Set A/D data flow result=40 05:48:57 Set A/D channel type result=40 05:48:57 Set A/D encoding result=40 05:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:57 Set channel filter=0.000000e+000 result=40 05:48:57 Config A/D Result=40 05:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:57 Get A/D filter: -9.255963e+061 result=40 05:48:57 Get A/D value=-858993460 result=40 05:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:57 Parameters OK 05:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:57 Set A/D data flow result=40 05:48:57 Set A/D channel type result=40 05:48:57 Set A/D encoding result=40 05:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:57 Set channel filter=0.000000e+000 result=40 05:48:57 Config A/D Result=40 05:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:57 Get A/D filter: -9.255963e+061 result=40 05:48:57 Get A/D value=-858993460 result=40 05:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:57 Aux= 05:48:57 Message to Camera, serial 267029 queued 05:49:06 Received message from Master: op=Shutter serial=267039 05:49:06 Shutter LASER close 05:49:06 Received message from Master: op=PointingHead serial=267043 05:49:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:07 Point started: ret=0 05:49:07 point_skyscan result=0 05:49:07 Check angles 05:49:07 SkyScan query 05:49:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 05:49:08 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 05:49:08 Check angles 05:49:08 SkyScan query 05:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 05:49:09 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 05:49:09 Check angles 05:49:09 SkyScan query 05:49:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 05:49:09 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 05:49:10 Check angles 05:49:10 SkyScan query 05:49:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.025<-17335 Statuses=0008 0009 05:49:10 Msec=2250 True Az=112.995 Ze=-80.025 Az status=0008 Ze status=0009 05:49:10 Check angles 05:49:10 SkyScan query 05:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 05:49:11 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 05:49:11 Check angles 05:49:11 SkyScan query 05:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 05:49:12 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 05:49:12 Check angles 05:49:12 SkyScan query 05:49:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 05:49:12 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 05:49:13 Check angles 05:49:13 SkyScan query 05:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 05:49:13 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 05:49:13 Check angles 05:49:13 SkyScan query 05:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:49:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:49:14 Message to Master queued w/err=0: serial=267043 error=0 05:49:19 Received message from Master: op=Filter serial=267044 05:49:19 Color wheel filter change from 0 to 0 05:49:19 FLIGetFilterPos err=0 currentPosition=0 05:49:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:19 Filter is already there-color wheel unchanged 05:49:19 Received message from Master: op=Shutter serial=267045 05:49:19 Shutter LASER close 05:49:19 Received message from Camera: op=State serial=267047 05:49:19 GetSingleValue result=40 Value=cccccccc 05:49:19 SkyScan query 05:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:20 Parameters OK 05:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:20 Set A/D data flow result=40 05:49:20 Set A/D channel type result=40 05:49:20 Set A/D encoding result=40 05:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:20 Set channel filter=0.000000e+000 result=40 05:49:20 Config A/D Result=40 05:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:20 Get A/D filter: -9.255963e+061 result=40 05:49:20 Get A/D value=-858993460 result=40 05:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:20 Parameters OK 05:49:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:20 Set A/D data flow result=40 05:49:20 Set A/D channel type result=40 05:49:20 Set A/D encoding result=40 05:49:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:20 Set channel filter=0.000000e+000 result=40 05:49:20 Config A/D Result=40 05:49:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:20 Get A/D filter: -9.255963e+061 result=40 05:49:20 Get A/D value=-858993460 result=40 05:49:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:20 Aux= 05:49:20 Message to Camera, serial 267047 queued 05:49:57 Received message from Master: op=PointingHead serial=267060 05:49:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:49:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:49:57 Point started: ret=0 05:49:57 point_skyscan result=0 05:49:58 Check angles 05:49:58 SkyScan query 05:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:49:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:49:58 Message to Master queued w/err=0: serial=267060 error=0 05:50:03 Received message from Master: op=Filter serial=267061 05:50:03 Color wheel filter change from 0 to 0 05:50:03 FLIGetFilterPos err=0 currentPosition=0 05:50:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:03 Filter is already there-color wheel unchanged 05:50:03 Received message from Master: op=Shutter serial=267062 05:50:03 Shutter LASER close 05:50:04 Received message from Camera: op=State serial=267064 05:50:04 GetSingleValue result=40 Value=cccccccc 05:50:04 SkyScan query 05:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:04 Parameters OK 05:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:04 Set A/D data flow result=40 05:50:04 Set A/D channel type result=40 05:50:04 Set A/D encoding result=40 05:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:04 Set channel filter=0.000000e+000 result=40 05:50:04 Config A/D Result=40 05:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:04 Get A/D filter: -9.255963e+061 result=40 05:50:04 Get A/D value=-858993460 result=40 05:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:04 Parameters OK 05:50:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:04 Set A/D data flow result=40 05:50:04 Set A/D channel type result=40 05:50:04 Set A/D encoding result=40 05:50:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:04 Set channel filter=0.000000e+000 result=40 05:50:04 Config A/D Result=40 05:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:04 Get A/D filter: -9.255963e+061 result=40 05:50:04 Get A/D value=-858993460 result=40 05:50:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:04 Aux= 05:50:04 Message to Camera, serial 267064 queued 05:50:41 Received message from Master: op=PointingHead serial=267077 05:50:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:50:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:50:41 Point started: ret=0 05:50:41 point_skyscan result=0 05:50:42 Check angles 05:50:42 SkyScan query 05:50:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:50:43 Message to Master queued w/err=0: serial=267077 error=0 05:50:48 Received message from Master: op=Filter serial=267078 05:50:48 Color wheel filter change from 0 to 0 05:50:48 FLIGetFilterPos err=0 currentPosition=0 05:50:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:48 Filter is already there-color wheel unchanged 05:50:48 Received message from Master: op=Shutter serial=267079 05:50:48 Shutter LASER close 05:50:48 Received message from Camera: op=State serial=267081 05:50:48 GetSingleValue result=40 Value=cccccccc 05:50:48 SkyScan query 05:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:50:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:48 Parameters OK 05:50:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:48 Set A/D data flow result=40 05:50:48 Set A/D channel type result=40 05:50:48 Set A/D encoding result=40 05:50:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:48 Set channel filter=0.000000e+000 result=40 05:50:48 Config A/D Result=40 05:50:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:48 Get A/D filter: -9.255963e+061 result=40 05:50:48 Get A/D value=-858993460 result=40 05:50:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:48 Parameters OK 05:50:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:48 Set A/D data flow result=40 05:50:48 Set A/D channel type result=40 05:50:48 Set A/D encoding result=40 05:50:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:48 Set channel filter=0.000000e+000 result=40 05:50:48 Config A/D Result=40 05:50:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:48 Get A/D filter: -9.255963e+061 result=40 05:50:48 Get A/D value=-858993460 result=40 05:50:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:48 Aux= 05:50:48 Message to Camera, serial 267081 queued 05:51:25 Received message from Master: op=PointingHead serial=267094 05:51:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:51:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:51:26 Point started: ret=0 05:51:26 point_skyscan result=0 05:51:26 Check angles 05:51:26 SkyScan query 05:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:51:27 Message to Master queued w/err=0: serial=267094 error=0 05:51:32 Received message from Master: op=Filter serial=267095 05:51:32 Color wheel filter change from 0 to 0 05:51:32 FLIGetFilterPos err=0 currentPosition=0 05:51:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:32 Filter is already there-color wheel unchanged 05:51:32 Received message from Master: op=Shutter serial=267096 05:51:32 Shutter LASER close 05:51:32 Received message from Camera: op=State serial=267098 05:51:32 GetSingleValue result=40 Value=cccccccc 05:51:32 SkyScan query 05:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:51:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:33 Parameters OK 05:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:33 Set A/D data flow result=40 05:51:33 Set A/D channel type result=40 05:51:33 Set A/D encoding result=40 05:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:33 Set channel filter=0.000000e+000 result=40 05:51:33 Config A/D Result=40 05:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:33 Get A/D filter: -9.255963e+061 result=40 05:51:33 Get A/D value=-858993460 result=40 05:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:33 Parameters OK 05:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:33 Set A/D data flow result=40 05:51:33 Set A/D channel type result=40 05:51:33 Set A/D encoding result=40 05:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:33 Set channel filter=0.000000e+000 result=40 05:51:33 Config A/D Result=40 05:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:33 Get A/D filter: -9.255963e+061 result=40 05:51:33 Get A/D value=-858993460 result=40 05:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:33 Aux= 05:51:33 Message to Camera, serial 267098 queued 05:52:10 Received message from Master: op=PointingHead serial=267111 05:52:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:52:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:52:10 Point started: ret=0 05:52:10 point_skyscan result=0 05:52:11 Check angles 05:52:11 SkyScan query 05:52:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 05:52:11 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 05:52:11 Check angles 05:52:11 SkyScan query 05:52:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 05:52:12 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 05:52:12 Check angles 05:52:12 SkyScan query 05:52:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 05:52:13 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 05:52:13 Check angles 05:52:13 SkyScan query 05:52:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.22<-17748 Statuses=0008 0009 05:52:13 Msec=2250 True Az=112.995 Ze=-86.22 Az status=0008 Ze status=0009 05:52:14 Check angles 05:52:14 SkyScan query 05:52:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.16<-19144 Statuses=0008 0009 05:52:14 Msec=3000 True Az=112.995 Ze=-107.16 Az status=0008 Ze status=0009 05:52:14 Check angles 05:52:14 SkyScan query 05:52:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.115<-20541 Statuses=0008 0009 05:52:15 Msec=3750 True Az=112.995 Ze=-128.115 Az status=0008 Ze status=0009 05:52:15 Check angles 05:52:15 SkyScan query 05:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.085<-21939 Statuses=0008 0009 05:52:16 Msec=4500 True Az=112.995 Ze=-149.085 Az status=0008 Ze status=0009 05:52:16 Check angles 05:52:16 SkyScan query 05:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.025<-23335 Statuses=0008 0009 05:52:16 Msec=5250 True Az=112.995 Ze=-170.025 Az status=0008 Ze status=0009 05:52:17 Check angles 05:52:17 SkyScan query 05:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:52:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:52:17 Message to Master queued w/err=0: serial=267111 error=0 05:52:22 Received message from Master: op=Filter serial=267112 05:52:22 Color wheel filter change from 0 to 0 05:52:22 FLIGetFilterPos err=0 currentPosition=0 05:52:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:22 Filter is already there-color wheel unchanged 05:52:22 Received message from Master: op=Shutter serial=267113 05:52:22 Shutter LASER open 05:52:23 Received message from Camera: op=State serial=267115 05:52:23 GetSingleValue result=40 Value=cccccccc 05:52:23 SkyScan query 05:52:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:52:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:23 Parameters OK 05:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:23 Set A/D data flow result=40 05:52:23 Set A/D channel type result=40 05:52:23 Set A/D encoding result=40 05:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:23 Set channel filter=0.000000e+000 result=40 05:52:23 Config A/D Result=40 05:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:23 Get A/D filter: -9.255963e+061 result=40 05:52:23 Get A/D value=-858993460 result=40 05:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:23 Parameters OK 05:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:23 Set A/D data flow result=40 05:52:23 Set A/D channel type result=40 05:52:23 Set A/D encoding result=40 05:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:23 Set channel filter=0.000000e+000 result=40 05:52:23 Config A/D Result=40 05:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:23 Get A/D filter: -9.255963e+061 result=40 05:52:23 Get A/D value=-858993460 result=40 05:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:23 Aux= 05:52:23 Message to Camera, serial 267115 queued 05:52:32 Received message from Master: op=Shutter serial=267125 05:52:32 Shutter LASER close 05:52:32 Received message from Master: op=PointingHead serial=267129 05:52:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:52:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:52:33 Point started: ret=0 05:52:33 point_skyscan result=0 05:52:33 Check angles 05:52:33 SkyScan query 05:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 05:52:34 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 05:52:34 Check angles 05:52:34 SkyScan query 05:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 05:52:35 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 05:52:35 Check angles 05:52:35 SkyScan query 05:52:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.49<-18766 Statuses=0008 0009 05:52:35 Msec=1500 True Az=112.995 Ze=-101.49 Az status=0008 Ze status=0009 05:52:36 Check angles 05:52:36 SkyScan query 05:52:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 05:52:36 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 05:52:36 Check angles 05:52:36 SkyScan query 05:52:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.58<-15972 Statuses=0008 0009 05:52:37 Msec=3000 True Az=112.995 Ze=-59.58 Az status=0008 Ze status=0009 05:52:37 Check angles 05:52:37 SkyScan query 05:52:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 05:52:38 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 05:52:38 Check angles 05:52:38 SkyScan query 05:52:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.655<-13177 Statuses=0008 0009 05:52:38 Msec=4500 True Az=112.995 Ze=-17.655 Az status=0008 Ze status=0009 05:52:39 Check angles 05:52:39 SkyScan query 05:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 05:52:39 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 05:52:39 Check angles 05:52:39 SkyScan query 05:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:52:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:52:40 Message to Master queued w/err=0: serial=267129 error=0 05:52:45 Received message from Master: op=Filter serial=267130 05:52:45 Color wheel filter change from 0 to 0 05:52:45 FLIGetFilterPos err=0 currentPosition=0 05:52:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:45 Filter is already there-color wheel unchanged 05:52:45 Received message from Master: op=Shutter serial=267131 05:52:45 Shutter LASER close 05:52:45 Received message from Camera: op=State serial=267133 05:52:45 GetSingleValue result=40 Value=cccccccc 05:52:45 SkyScan query 05:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:52:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:46 Parameters OK 05:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:46 Set A/D data flow result=40 05:52:46 Set A/D channel type result=40 05:52:46 Set A/D encoding result=40 05:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:46 Set channel filter=0.000000e+000 result=40 05:52:46 Config A/D Result=40 05:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:46 Get A/D filter: -9.255963e+061 result=40 05:52:46 Get A/D value=-858993460 result=40 05:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:46 Parameters OK 05:52:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:46 Set A/D data flow result=40 05:52:46 Set A/D channel type result=40 05:52:46 Set A/D encoding result=40 05:52:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:46 Set channel filter=0.000000e+000 result=40 05:52:46 Config A/D Result=40 05:52:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:46 Get A/D filter: -9.255963e+061 result=40 05:52:46 Get A/D value=-858993460 result=40 05:52:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:46 Aux= 05:52:46 Message to Camera, serial 267133 queued 05:53:23 Received message from Master: op=PointingHead serial=267146 05:53:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:53:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:53:23 Point started: ret=0 05:53:23 point_skyscan result=0 05:53:24 Check angles 05:53:24 SkyScan query 05:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:53:24 Message to Master queued w/err=0: serial=267146 error=0 05:53:29 Received message from Master: op=Filter serial=267147 05:53:29 Color wheel filter change from 0 to 0 05:53:29 FLIGetFilterPos err=0 currentPosition=0 05:53:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:29 Filter is already there-color wheel unchanged 05:53:29 Received message from Master: op=Shutter serial=267148 05:53:29 Shutter LASER close 05:53:30 Received message from Camera: op=State serial=267150 05:53:30 GetSingleValue result=40 Value=cccccccc 05:53:30 SkyScan query 05:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:30 Parameters OK 05:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:30 Set A/D data flow result=40 05:53:30 Set A/D channel type result=40 05:53:30 Set A/D encoding result=40 05:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:30 Set channel filter=0.000000e+000 result=40 05:53:30 Config A/D Result=40 05:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:30 Get A/D filter: -9.255963e+061 result=40 05:53:30 Get A/D value=-858993460 result=40 05:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:30 Parameters OK 05:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:30 Set A/D data flow result=40 05:53:30 Set A/D channel type result=40 05:53:30 Set A/D encoding result=40 05:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:30 Set channel filter=0.000000e+000 result=40 05:53:30 Config A/D Result=40 05:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:30 Get A/D filter: -9.255963e+061 result=40 05:53:30 Get A/D value=-858993460 result=40 05:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:30 Aux= 05:53:30 Message to Camera, serial 267150 queued 05:54:07 Received message from Master: op=PointingHead serial=267163 05:54:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 05:54:07 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 05:54:07 Point started: ret=0 05:54:07 point_skyscan result=0 05:54:08 Check angles 05:54:08 SkyScan query 05:54:09 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 05:54:09 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 05:54:09 Check angles 05:54:09 SkyScan query 05:54:09 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 05:54:09 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 05:54:10 Check angles 05:54:10 SkyScan query 05:54:10 SkyScan query done: ret=0 az=170.91<-11394 ze=-6.495<-12433 Statuses=0009 0008 05:54:10 Msec=1500 True Az=170.91 Ze=-6.495 Az status=0009 Ze status=0008 05:54:10 Check angles 05:54:10 SkyScan query 05:54:11 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 05:54:11 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 05:54:11 Message to Master queued w/err=0: serial=267163 error=0 [UTC 2019-3-14 05:54:16] 05:54:16 Received message from Master: op=Filter serial=267164 05:54:16 Color wheel filter change from 0 to 0 05:54:16 FLIGetFilterPos err=0 currentPosition=0 05:54:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:16 Filter is already there-color wheel unchanged 05:54:16 Received message from Master: op=Shutter serial=267165 05:54:16 Shutter LASER close 05:54:16 Received message from Camera: op=State serial=267167 05:54:16 GetSingleValue result=40 Value=cccccccc 05:54:16 SkyScan query 05:54:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 05:54:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:17 Parameters OK 05:54:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:17 Set A/D data flow result=40 05:54:17 Set A/D channel type result=40 05:54:17 Set A/D encoding result=40 05:54:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:17 Set channel filter=0.000000e+000 result=40 05:54:17 Config A/D Result=40 05:54:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:17 Get A/D filter: -9.255963e+061 result=40 05:54:17 Get A/D value=-858993460 result=40 05:54:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:17 Parameters OK 05:54:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:17 Set A/D data flow result=40 05:54:17 Set A/D channel type result=40 05:54:17 Set A/D encoding result=40 05:54:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:17 Set channel filter=0.000000e+000 result=40 05:54:17 Config A/D Result=40 05:54:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:17 Get A/D filter: -9.255963e+061 result=40 05:54:17 Get A/D value=-858993460 result=40 05:54:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:17 Aux= 05:54:17 Message to Camera, serial 267167 queued 05:54:54 Received message from Master: op=PointingHead serial=267180 05:54:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:54:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:54:54 Point started: ret=0 05:54:54 point_skyscan result=0 05:54:55 Check angles 05:54:55 SkyScan query 05:54:55 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 05:54:55 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 05:54:55 Check angles 05:54:55 SkyScan query 05:54:56 SkyScan query done: ret=0 az=135.705<-9047 ze=6.495<-11567 Statuses=0009 0008 05:54:56 Msec=750 True Az=135.705 Ze=6.495 Az status=0009 Ze status=0008 05:54:56 Check angles 05:54:56 SkyScan query 05:54:57 SkyScan query done: ret=0 az=118.215<-7881 ze=6.495<-11567 Statuses=0009 0008 05:54:57 Msec=1500 True Az=118.215 Ze=6.495 Az status=0009 Ze status=0008 05:54:57 Check angles 05:54:57 SkyScan query 05:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:54:57 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:54:57 Message to Master queued w/err=0: serial=267180 error=0 05:55:02 Received message from Master: op=Filter serial=267181 05:55:02 Color wheel filter change from 0 to 0 05:55:02 FLIGetFilterPos err=0 currentPosition=0 05:55:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:02 Filter is already there-color wheel unchanged 05:55:03 Received message from Master: op=Shutter serial=267182 05:55:03 Shutter LASER close 05:55:03 Received message from Camera: op=State serial=267184 05:55:03 GetSingleValue result=40 Value=cccccccc 05:55:03 SkyScan query 05:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:55:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:03 Parameters OK 05:55:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:03 Set A/D data flow result=40 05:55:03 Set A/D channel type result=40 05:55:03 Set A/D encoding result=40 05:55:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:03 Set channel filter=0.000000e+000 result=40 05:55:03 Config A/D Result=40 05:55:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:03 Get A/D filter: -9.255963e+061 result=40 05:55:03 Get A/D value=-858993460 result=40 05:55:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:03 Parameters OK 05:55:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:03 Set A/D data flow result=40 05:55:03 Set A/D channel type result=40 05:55:03 Set A/D encoding result=40 05:55:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:03 Set channel filter=0.000000e+000 result=40 05:55:03 Config A/D Result=40 05:55:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:03 Get A/D filter: -9.255963e+061 result=40 05:55:03 Get A/D value=-858993460 result=40 05:55:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:03 Aux= 05:55:03 Message to Camera, serial 267184 queued 05:55:39 Received message from Master: op=PointingHead serial=267196 05:55:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:55:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:55:40 Point started: ret=0 05:55:40 point_skyscan result=0 05:55:40 Check angles 05:55:40 SkyScan query 05:55:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 05:55:41 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 05:55:41 Check angles 05:55:41 SkyScan query 05:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 05:55:42 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 05:55:42 Check angles 05:55:42 SkyScan query 05:55:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 05:55:42 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 05:55:43 Check angles 05:55:43 SkyScan query 05:55:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 05:55:43 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 05:55:43 Check angles 05:55:43 SkyScan query 05:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 05:55:44 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 05:55:44 Check angles 05:55:44 SkyScan query 05:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 05:55:45 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 05:55:45 Check angles 05:55:45 SkyScan query 05:55:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 05:55:45 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 05:55:46 Check angles 05:55:46 SkyScan query 05:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 05:55:46 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 05:55:46 Check angles 05:55:46 SkyScan query 05:55:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:55:47 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:55:47 Message to Master queued w/err=0: serial=267196 error=0 05:55:52 Received message from Master: op=Filter serial=267197 05:55:52 Color wheel filter change from 0 to 0 05:55:52 FLIGetFilterPos err=0 currentPosition=0 05:55:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:52 Filter is already there-color wheel unchanged 05:55:52 Received message from Master: op=Shutter serial=267198 05:55:52 Shutter LASER open 05:55:52 Received message from Camera: op=State serial=267200 05:55:52 GetSingleValue result=40 Value=cccccccc 05:55:52 SkyScan query 05:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:55:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:53 Parameters OK 05:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:53 Set A/D data flow result=40 05:55:53 Set A/D channel type result=40 05:55:53 Set A/D encoding result=40 05:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:53 Set channel filter=0.000000e+000 result=40 05:55:53 Config A/D Result=40 05:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:53 Get A/D filter: -9.255963e+061 result=40 05:55:53 Get A/D value=-858993460 result=40 05:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:53 Parameters OK 05:55:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:53 Set A/D data flow result=40 05:55:53 Set A/D channel type result=40 05:55:53 Set A/D encoding result=40 05:55:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:53 Set channel filter=0.000000e+000 result=40 05:55:53 Config A/D Result=40 05:55:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:53 Get A/D filter: -9.255963e+061 result=40 05:55:53 Get A/D value=-858993460 result=40 05:55:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:53 Aux= 05:55:53 Message to Camera, serial 267200 queued 05:56:01 Received message from Master: op=Shutter serial=267210 05:56:01 Shutter LASER close 05:56:02 Received message from Master: op=PointingHead serial=267214 05:56:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:02 Point started: ret=0 05:56:02 point_skyscan result=0 05:56:03 Check angles 05:56:03 SkyScan query 05:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 05:56:03 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 05:56:04 Check angles 05:56:04 SkyScan query 05:56:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 05:56:04 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 05:56:04 Check angles 05:56:04 SkyScan query 05:56:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 05:56:05 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 05:56:05 Check angles 05:56:05 SkyScan query 05:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 05:56:06 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 05:56:06 Check angles 05:56:06 SkyScan query 05:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 05:56:06 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 05:56:07 Check angles 05:56:07 SkyScan query 05:56:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.46<-14564 Statuses=0008 0009 05:56:07 Msec=3750 True Az=112.995 Ze=-38.46 Az status=0008 Ze status=0009 05:56:07 Check angles 05:56:07 SkyScan query 05:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.535<-13169 Statuses=0008 0009 05:56:08 Msec=4500 True Az=112.995 Ze=-17.535 Az status=0008 Ze status=0009 05:56:08 Check angles 05:56:08 SkyScan query 05:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=3.48<-11768 Statuses=0008 0009 05:56:09 Msec=5250 True Az=112.995 Ze=3.48 Az status=0008 Ze status=0009 05:56:09 Check angles 05:56:09 SkyScan query 05:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:56:09 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:56:09 Message to Master queued w/err=0: serial=267214 error=0 05:56:14 Received message from Master: op=Filter serial=267215 05:56:14 Color wheel filter change from 0 to 0 05:56:14 FLIGetFilterPos err=0 currentPosition=0 05:56:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:14 Filter is already there-color wheel unchanged 05:56:15 Received message from Master: op=Shutter serial=267216 05:56:15 Shutter LASER close 05:56:15 Received message from Camera: op=State serial=267218 05:56:15 GetSingleValue result=40 Value=cccccccc 05:56:15 SkyScan query 05:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:15 Parameters OK 05:56:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:15 Set A/D data flow result=40 05:56:15 Set A/D channel type result=40 05:56:15 Set A/D encoding result=40 05:56:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:15 Set channel filter=0.000000e+000 result=40 05:56:15 Config A/D Result=40 05:56:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:15 Get A/D filter: -9.255963e+061 result=40 05:56:15 Get A/D value=-858993460 result=40 05:56:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:15 Parameters OK 05:56:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:15 Set A/D data flow result=40 05:56:15 Set A/D channel type result=40 05:56:15 Set A/D encoding result=40 05:56:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:15 Set channel filter=0.000000e+000 result=40 05:56:15 Config A/D Result=40 05:56:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:15 Get A/D filter: -9.255963e+061 result=40 05:56:15 Get A/D value=-858993460 result=40 05:56:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:15 Aux= 05:56:15 Message to Camera, serial 267218 queued 05:56:52 Received message from Master: op=PointingHead serial=267231 05:56:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:56:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:56:53 Point started: ret=0 05:56:53 point_skyscan result=0 05:56:53 Check angles 05:56:53 SkyScan query 05:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:56:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:56:54 Message to Master queued w/err=0: serial=267231 error=0 05:56:59 Received message from Master: op=Filter serial=267232 05:56:59 Color wheel filter change from 0 to 0 05:56:59 FLIGetFilterPos err=0 currentPosition=0 05:56:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:59 Filter is already there-color wheel unchanged 05:56:59 Received message from Master: op=Shutter serial=267233 05:56:59 Shutter LASER close 05:56:59 Received message from Camera: op=State serial=267235 05:56:59 GetSingleValue result=40 Value=cccccccc 05:56:59 SkyScan query 05:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:00 Parameters OK 05:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:00 Set A/D data flow result=40 05:57:00 Set A/D channel type result=40 05:57:00 Set A/D encoding result=40 05:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:00 Set channel filter=0.000000e+000 result=40 05:57:00 Config A/D Result=40 05:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:00 Get A/D filter: -9.255963e+061 result=40 05:57:00 Get A/D value=-858993460 result=40 05:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:00 Parameters OK 05:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:00 Set A/D data flow result=40 05:57:00 Set A/D channel type result=40 05:57:00 Set A/D encoding result=40 05:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:00 Set channel filter=0.000000e+000 result=40 05:57:00 Config A/D Result=40 05:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:00 Get A/D filter: -9.255963e+061 result=40 05:57:00 Get A/D value=-858993460 result=40 05:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:00 Aux= 05:57:00 Message to Camera, serial 267235 queued 05:57:37 Received message from Master: op=PointingHead serial=267248 05:57:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:57:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:57:37 Point started: ret=0 05:57:37 point_skyscan result=0 05:57:38 Check angles 05:57:38 SkyScan query 05:57:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:57:38 Message to Master queued w/err=0: serial=267248 error=0 05:57:43 Received message from Master: op=Filter serial=267249 05:57:43 Color wheel filter change from 0 to 0 05:57:43 FLIGetFilterPos err=0 currentPosition=0 05:57:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:43 Filter is already there-color wheel unchanged 05:57:43 Received message from Master: op=Shutter serial=267250 05:57:43 Shutter LASER close 05:57:43 Received message from Camera: op=State serial=267252 05:57:43 GetSingleValue result=40 Value=cccccccc 05:57:43 SkyScan query 05:57:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:57:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:44 Parameters OK 05:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:44 Set A/D data flow result=40 05:57:44 Set A/D channel type result=40 05:57:44 Set A/D encoding result=40 05:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:44 Set channel filter=0.000000e+000 result=40 05:57:44 Config A/D Result=40 05:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:44 Get A/D filter: -9.255963e+061 result=40 05:57:44 Get A/D value=-858993460 result=40 05:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:44 Parameters OK 05:57:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:44 Set A/D data flow result=40 05:57:44 Set A/D channel type result=40 05:57:44 Set A/D encoding result=40 05:57:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:44 Set channel filter=0.000000e+000 result=40 05:57:44 Config A/D Result=40 05:57:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:44 Get A/D filter: -9.255963e+061 result=40 05:57:44 Get A/D value=-858993460 result=40 05:57:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:44 Aux= 05:57:44 Message to Camera, serial 267252 queued 05:58:21 Received message from Master: op=PointingHead serial=267265 05:58:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:58:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:58:21 Point started: ret=0 05:58:21 point_skyscan result=0 05:58:22 Check angles 05:58:22 SkyScan query 05:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 05:58:22 Message to Master queued w/err=0: serial=267265 error=0 05:58:27 Received message from Master: op=Filter serial=267266 05:58:27 Color wheel filter change from 0 to 0 05:58:27 FLIGetFilterPos err=0 currentPosition=0 05:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:27 Filter is already there-color wheel unchanged 05:58:28 Received message from Master: op=Shutter serial=267267 05:58:28 Shutter LASER close 05:58:28 Received message from Camera: op=State serial=267269 05:58:28 GetSingleValue result=40 Value=cccccccc 05:58:28 SkyScan query 05:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:28 Parameters OK 05:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:28 Set A/D data flow result=40 05:58:28 Set A/D channel type result=40 05:58:28 Set A/D encoding result=40 05:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:28 Set channel filter=0.000000e+000 result=40 05:58:28 Config A/D Result=40 05:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:28 Get A/D filter: -9.255963e+061 result=40 05:58:28 Get A/D value=-858993460 result=40 05:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:28 Parameters OK 05:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:28 Set A/D data flow result=40 05:58:28 Set A/D channel type result=40 05:58:28 Set A/D encoding result=40 05:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:28 Set channel filter=0.000000e+000 result=40 05:58:28 Config A/D Result=40 05:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:28 Get A/D filter: -9.255963e+061 result=40 05:58:28 Get A/D value=-858993460 result=40 05:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:28 Aux= 05:58:28 Message to Camera, serial 267269 queued 05:59:05 Received message from Master: op=PointingHead serial=267282 05:59:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:59:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:59:05 Point started: ret=0 05:59:05 point_skyscan result=0 05:59:06 Check angles 05:59:06 SkyScan query 05:59:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 05:59:07 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 05:59:07 Check angles 05:59:07 SkyScan query 05:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 05:59:08 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 05:59:08 Check angles 05:59:08 SkyScan query 05:59:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 05:59:08 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 05:59:08 Check angles 05:59:08 SkyScan query 05:59:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 05:59:09 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 05:59:09 Check angles 05:59:09 SkyScan query 05:59:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 05:59:10 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 05:59:10 Check angles 05:59:10 SkyScan query 05:59:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 05:59:11 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 05:59:11 Check angles 05:59:11 SkyScan query 05:59:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 05:59:11 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 05:59:11 Check angles 05:59:11 SkyScan query 05:59:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 05:59:12 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 05:59:12 Check angles 05:59:12 SkyScan query 05:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:59:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:59:13 Message to Master queued w/err=0: serial=267282 error=0 05:59:18 Received message from Master: op=Filter serial=267283 05:59:18 Color wheel filter change from 0 to 0 05:59:18 FLIGetFilterPos err=0 currentPosition=0 05:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:18 Filter is already there-color wheel unchanged 05:59:18 Received message from Master: op=Shutter serial=267284 05:59:18 Shutter LASER open 05:59:18 Received message from Camera: op=State serial=267286 05:59:18 GetSingleValue result=40 Value=cccccccc 05:59:18 SkyScan query 05:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:19 Parameters OK 05:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:19 Set A/D data flow result=40 05:59:19 Set A/D channel type result=40 05:59:19 Set A/D encoding result=40 05:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:19 Set channel filter=0.000000e+000 result=40 05:59:19 Config A/D Result=40 05:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:19 Get A/D filter: -9.255963e+061 result=40 05:59:19 Get A/D value=-858993460 result=40 05:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:19 Parameters OK 05:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:19 Set A/D data flow result=40 05:59:19 Set A/D channel type result=40 05:59:19 Set A/D encoding result=40 05:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:19 Set channel filter=0.000000e+000 result=40 05:59:19 Config A/D Result=40 05:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:19 Get A/D filter: -9.255963e+061 result=40 05:59:19 Get A/D value=-858993460 result=40 05:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:19 Aux= 05:59:19 Message to Camera, serial 267286 queued 05:59:27 Received message from Master: op=Shutter serial=267296 05:59:27 Shutter LASER close 05:59:28 Received message from Master: op=PointingHead serial=267300 05:59:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 05:59:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 05:59:28 Point started: ret=0 05:59:28 point_skyscan result=0 05:59:29 Check angles 05:59:29 SkyScan query 05:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 05:59:29 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 05:59:30 Check angles 05:59:30 SkyScan query 05:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.16<-20144 Statuses=0008 0009 05:59:30 Msec=750 True Az=112.995 Ze=-122.16 Az status=0008 Ze status=0009 05:59:30 Check angles 05:59:30 SkyScan query 05:59:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 05:59:31 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 05:59:31 Check angles 05:59:31 SkyScan query 05:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.8<-17320 Statuses=0008 0009 05:59:32 Msec=2250 True Az=112.995 Ze=-79.8 Az status=0008 Ze status=0009 05:59:32 Check angles 05:59:32 SkyScan query 05:59:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.86<-15924 Statuses=0008 0009 05:59:32 Msec=3000 True Az=112.995 Ze=-58.86 Az status=0008 Ze status=0009 05:59:33 Check angles 05:59:33 SkyScan query 05:59:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.86<-14524 Statuses=0008 0009 05:59:33 Msec=3750 True Az=112.995 Ze=-37.86 Az status=0008 Ze status=0009 05:59:33 Check angles 05:59:33 SkyScan query 05:59:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 05:59:34 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 05:59:34 Check angles 05:59:34 SkyScan query 05:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 05:59:35 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 05:59:35 Check angles 05:59:35 SkyScan query 05:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 05:59:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 05:59:35 Message to Master queued w/err=0: serial=267300 error=0 05:59:40 Received message from Master: op=Filter serial=267301 05:59:40 Color wheel filter change from 0 to 0 05:59:40 FLIGetFilterPos err=0 currentPosition=0 05:59:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:40 Filter is already there-color wheel unchanged 05:59:41 Received message from Master: op=Shutter serial=267302 05:59:41 Shutter LASER close 05:59:41 Received message from Camera: op=State serial=267304 05:59:41 GetSingleValue result=40 Value=cccccccc 05:59:41 SkyScan query 05:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 05:59:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:41 Parameters OK 05:59:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:41 Set A/D data flow result=40 05:59:41 Set A/D channel type result=40 05:59:41 Set A/D encoding result=40 05:59:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:41 Set channel filter=0.000000e+000 result=40 05:59:41 Config A/D Result=40 05:59:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:41 Get A/D filter: -9.255963e+061 result=40 05:59:41 Get A/D value=-858993460 result=40 05:59:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:41 Parameters OK 05:59:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:41 Set A/D data flow result=40 05:59:41 Set A/D channel type result=40 05:59:41 Set A/D encoding result=40 05:59:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:41 Set channel filter=0.000000e+000 result=40 05:59:41 Config A/D Result=40 05:59:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:41 Get A/D filter: -9.255963e+061 result=40 05:59:41 Get A/D value=-858993460 result=40 05:59:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:41 Aux= 05:59:41 Message to Camera, serial 267304 queued 06:00:18 Received message from Master: op=PointingHead serial=267317 06:00:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:00:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:00:19 Point started: ret=0 06:00:19 point_skyscan result=0 06:00:19 Check angles 06:00:19 SkyScan query 06:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:00:20 Message to Master queued w/err=0: serial=267317 error=0 06:00:25 Received message from Master: op=Filter serial=267318 06:00:25 Color wheel filter change from 0 to 0 06:00:25 FLIGetFilterPos err=0 currentPosition=0 06:00:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:25 Filter is already there-color wheel unchanged 06:00:25 Received message from Master: op=Shutter serial=267319 06:00:25 Shutter LASER close 06:00:25 Received message from Camera: op=State serial=267321 06:00:25 GetSingleValue result=40 Value=cccccccc 06:00:25 SkyScan query 06:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:00:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:26 Parameters OK 06:00:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:26 Set A/D data flow result=40 06:00:26 Set A/D channel type result=40 06:00:26 Set A/D encoding result=40 06:00:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:26 Set channel filter=0.000000e+000 result=40 06:00:26 Config A/D Result=40 06:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:26 Get A/D filter: -9.255963e+061 result=40 06:00:26 Get A/D value=-858993460 result=40 06:00:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:26 Parameters OK 06:00:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:26 Set A/D data flow result=40 06:00:26 Set A/D channel type result=40 06:00:26 Set A/D encoding result=40 06:00:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:26 Set channel filter=0.000000e+000 result=40 06:00:26 Config A/D Result=40 06:00:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:26 Get A/D filter: -9.255963e+061 result=40 06:00:26 Get A/D value=-858993460 result=40 06:00:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:26 Aux= 06:00:26 Message to Camera, serial 267321 queued 06:01:03 Received message from Master: op=PointingHead serial=267334 06:01:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:01:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:01:03 Point started: ret=0 06:01:03 point_skyscan result=0 06:01:04 Check angles 06:01:04 SkyScan query 06:01:04 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 06:01:04 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 06:01:04 Check angles 06:01:04 SkyScan query 06:01:05 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 06:01:05 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 06:01:05 Check angles 06:01:05 SkyScan query 06:01:06 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 06:01:06 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 06:01:06 Check angles 06:01:06 SkyScan query 06:01:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:01:06 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:01:06 Message to Master queued w/err=0: serial=267334 error=0 06:01:11 Received message from Master: op=Filter serial=267335 06:01:11 Color wheel filter change from 0 to 0 06:01:11 FLIGetFilterPos err=0 currentPosition=0 06:01:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:11 Filter is already there-color wheel unchanged 06:01:12 Received message from Master: op=Shutter serial=267336 06:01:12 Shutter LASER close 06:01:12 Received message from Camera: op=State serial=267338 06:01:12 GetSingleValue result=40 Value=cccccccc 06:01:12 SkyScan query 06:01:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:01:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:12 Parameters OK 06:01:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:12 Set A/D data flow result=40 06:01:12 Set A/D channel type result=40 06:01:12 Set A/D encoding result=40 06:01:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:12 Set channel filter=0.000000e+000 result=40 06:01:12 Config A/D Result=40 06:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:12 Get A/D filter: -9.255963e+061 result=40 06:01:12 Get A/D value=-858993460 result=40 06:01:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:12 Parameters OK 06:01:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:12 Set A/D data flow result=40 06:01:12 Set A/D channel type result=40 06:01:12 Set A/D encoding result=40 06:01:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:12 Set channel filter=0.000000e+000 result=40 06:01:12 Config A/D Result=40 06:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:12 Get A/D filter: -9.255963e+061 result=40 06:01:12 Get A/D value=-858993460 result=40 06:01:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:12 Aux= 06:01:12 Message to Camera, serial 267338 queued 06:01:49 Received message from Master: op=PointingHead serial=267351 06:01:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:01:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:01:49 Point started: ret=0 06:01:49 point_skyscan result=0 06:01:50 Check angles 06:01:50 SkyScan query 06:01:51 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 06:01:51 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 06:01:51 Check angles 06:01:51 SkyScan query 06:01:52 SkyScan query done: ret=0 az=134.745<-8983 ze=6.495<-11567 Statuses=0009 0008 06:01:52 Msec=750 True Az=134.745 Ze=6.495 Az status=0009 Ze status=0008 06:01:52 Check angles 06:01:52 SkyScan query 06:01:52 SkyScan query done: ret=0 az=117.225<-7815 ze=6.495<-11567 Statuses=0009 0008 06:01:52 Msec=1500 True Az=117.225 Ze=6.495 Az status=0009 Ze status=0008 06:01:52 Check angles 06:01:52 SkyScan query 06:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:53 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:01:53 Message to Master queued w/err=0: serial=267351 error=0 06:01:58 Received message from Master: op=Filter serial=267352 06:01:58 Color wheel filter change from 0 to 0 06:01:58 FLIGetFilterPos err=0 currentPosition=0 06:01:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:58 Filter is already there-color wheel unchanged 06:01:58 Received message from Master: op=Shutter serial=267353 06:01:58 Shutter LASER close 06:01:58 Received message from Camera: op=State serial=267355 06:01:58 GetSingleValue result=40 Value=cccccccc 06:01:58 SkyScan query 06:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:01:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:59 Parameters OK 06:01:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:59 Set A/D data flow result=40 06:01:59 Set A/D channel type result=40 06:01:59 Set A/D encoding result=40 06:01:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:59 Set channel filter=0.000000e+000 result=40 06:01:59 Config A/D Result=40 06:01:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:59 Get A/D filter: -9.255963e+061 result=40 06:01:59 Get A/D value=-858993460 result=40 06:01:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:59 Parameters OK 06:01:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:59 Set A/D data flow result=40 06:01:59 Set A/D channel type result=40 06:01:59 Set A/D encoding result=40 06:01:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:59 Set channel filter=0.000000e+000 result=40 06:01:59 Config A/D Result=40 06:01:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:59 Get A/D filter: -9.255963e+061 result=40 06:01:59 Get A/D value=-858993460 result=40 06:01:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:59 Aux= 06:01:59 Message to Camera, serial 267355 queued 06:02:36 Received message from Master: op=PointingHead serial=267368 06:02:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:02:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:02:36 Point started: ret=0 06:02:36 point_skyscan result=0 06:02:37 Check angles 06:02:37 SkyScan query 06:02:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 06:02:37 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 06:02:38 Check angles 06:02:38 SkyScan query 06:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 06:02:38 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 06:02:38 Check angles 06:02:38 SkyScan query 06:02:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 06:02:39 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 06:02:39 Check angles 06:02:39 SkyScan query 06:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.54<-17836 Statuses=0008 0009 06:02:40 Msec=2250 True Az=112.995 Ze=-87.54 Az status=0008 Ze status=0009 06:02:40 Check angles 06:02:40 SkyScan query 06:02:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.48<-19232 Statuses=0008 0009 06:02:40 Msec=3000 True Az=112.995 Ze=-108.48 Az status=0008 Ze status=0009 06:02:41 Check angles 06:02:41 SkyScan query 06:02:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 06:02:41 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 06:02:41 Check angles 06:02:41 SkyScan query 06:02:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 06:02:42 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 06:02:42 Check angles 06:02:42 SkyScan query 06:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 06:02:43 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 06:02:43 Check angles 06:02:43 SkyScan query 06:02:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:02:43 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:02:43 Message to Master queued w/err=0: serial=267368 error=0 06:02:48 Received message from Master: op=Filter serial=267369 06:02:48 Color wheel filter change from 0 to 0 06:02:48 FLIGetFilterPos err=0 currentPosition=0 06:02:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:48 Filter is already there-color wheel unchanged 06:02:49 Received message from Master: op=Shutter serial=267370 06:02:49 Shutter LASER open 06:02:49 Received message from Camera: op=State serial=267372 06:02:49 GetSingleValue result=40 Value=cccccccc 06:02:49 SkyScan query 06:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:02:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:49 Parameters OK 06:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:49 Set A/D data flow result=40 06:02:49 Set A/D channel type result=40 06:02:49 Set A/D encoding result=40 06:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:49 Set channel filter=0.000000e+000 result=40 06:02:49 Config A/D Result=40 06:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:49 Get A/D filter: -9.255963e+061 result=40 06:02:49 Get A/D value=-858993460 result=40 06:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:49 Parameters OK 06:02:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:49 Set A/D data flow result=40 06:02:49 Set A/D channel type result=40 06:02:49 Set A/D encoding result=40 06:02:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:49 Set channel filter=0.000000e+000 result=40 06:02:49 Config A/D Result=40 06:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:49 Get A/D filter: -9.255963e+061 result=40 06:02:49 Get A/D value=-858993460 result=40 06:02:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:49 Aux= 06:02:49 Message to Camera, serial 267372 queued 06:02:58 Received message from Master: op=Shutter serial=267382 06:02:58 Shutter LASER close 06:02:58 Received message from Master: op=PointingHead serial=267386 06:02:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:02:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:02:58 Point started: ret=0 06:02:58 point_skyscan result=0 06:02:59 Check angles 06:02:59 SkyScan query 06:03:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 06:03:00 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 06:03:00 Check angles 06:03:00 SkyScan query 06:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 06:03:01 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 06:03:01 Check angles 06:03:01 SkyScan query 06:03:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 06:03:01 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 06:03:02 Check angles 06:03:02 SkyScan query 06:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 06:03:02 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 06:03:02 Check angles 06:03:02 SkyScan query 06:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 06:03:03 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 06:03:03 Check angles 06:03:03 SkyScan query 06:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 06:03:04 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 06:03:04 Check angles 06:03:04 SkyScan query 06:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.17<-13078 Statuses=0008 0009 06:03:04 Msec=4500 True Az=112.995 Ze=-16.17 Az status=0008 Ze status=0009 06:03:05 Check angles 06:03:05 SkyScan query 06:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 06:03:05 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 06:03:05 Check angles 06:03:05 SkyScan query 06:03:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:03:06 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:03:06 Message to Master queued w/err=0: serial=267386 error=0 06:03:11 Received message from Master: op=Filter serial=267387 06:03:11 Color wheel filter change from 0 to 0 06:03:11 FLIGetFilterPos err=0 currentPosition=0 06:03:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:11 Filter is already there-color wheel unchanged 06:03:11 Received message from Master: op=Shutter serial=267388 06:03:11 Shutter LASER close 06:03:11 Received message from Camera: op=State serial=267390 06:03:11 GetSingleValue result=40 Value=cccccccc 06:03:11 SkyScan query 06:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:12 Parameters OK 06:03:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:12 Set A/D data flow result=40 06:03:12 Set A/D channel type result=40 06:03:12 Set A/D encoding result=40 06:03:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:12 Set channel filter=0.000000e+000 result=40 06:03:12 Config A/D Result=40 06:03:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:12 Get A/D filter: -9.255963e+061 result=40 06:03:12 Get A/D value=-858993460 result=40 06:03:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:12 Parameters OK 06:03:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:12 Set A/D data flow result=40 06:03:12 Set A/D channel type result=40 06:03:12 Set A/D encoding result=40 06:03:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:12 Set channel filter=0.000000e+000 result=40 06:03:12 Config A/D Result=40 06:03:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:12 Get A/D filter: -9.255963e+061 result=40 06:03:12 Get A/D value=-858993460 result=40 06:03:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:12 Aux= 06:03:12 Message to Camera, serial 267390 queued 06:03:35 Received message from Master: op=Identify serial=267391 [UTC 2019-3-14 06:03:48] 06:03:49 Received message from Master: op=PointingHead serial=267406 06:03:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:03:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:03:49 Point started: ret=0 06:03:49 point_skyscan result=0 06:03:50 Check angles 06:03:50 SkyScan query 06:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:03:50 Message to Master queued w/err=0: serial=267406 error=0 06:03:55 Received message from Master: op=Filter serial=267407 06:03:55 Color wheel filter change from 0 to 0 06:03:55 FLIGetFilterPos err=0 currentPosition=0 06:03:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:55 Filter is already there-color wheel unchanged 06:03:55 Received message from Master: op=Shutter serial=267408 06:03:55 Shutter LASER close 06:03:56 Received message from Camera: op=State serial=267410 06:03:56 GetSingleValue result=40 Value=cccccccc 06:03:56 SkyScan query 06:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:03:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:56 Parameters OK 06:03:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:56 Set A/D data flow result=40 06:03:56 Set A/D channel type result=40 06:03:56 Set A/D encoding result=40 06:03:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:56 Set channel filter=0.000000e+000 result=40 06:03:56 Config A/D Result=40 06:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:56 Get A/D filter: -9.255963e+061 result=40 06:03:56 Get A/D value=-858993460 result=40 06:03:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:56 Parameters OK 06:03:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:56 Set A/D data flow result=40 06:03:56 Set A/D channel type result=40 06:03:56 Set A/D encoding result=40 06:03:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:56 Set channel filter=0.000000e+000 result=40 06:03:56 Config A/D Result=40 06:03:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:56 Get A/D filter: -9.255963e+061 result=40 06:03:56 Get A/D value=-858993460 result=40 06:03:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:56 Aux= 06:03:56 Message to Camera, serial 267410 queued 06:04:33 Received message from Master: op=PointingHead serial=267423 06:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:04:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:04:33 Point started: ret=0 06:04:33 point_skyscan result=0 06:04:34 Check angles 06:04:34 SkyScan query 06:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:04:35 Message to Master queued w/err=0: serial=267423 error=0 06:04:40 Received message from Master: op=Filter serial=267424 06:04:40 Color wheel filter change from 0 to 0 06:04:40 FLIGetFilterPos err=0 currentPosition=0 06:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:40 Filter is already there-color wheel unchanged 06:04:40 Received message from Master: op=Shutter serial=267425 06:04:40 Shutter LASER close 06:04:40 Received message from Camera: op=State serial=267427 06:04:40 GetSingleValue result=40 Value=cccccccc 06:04:40 SkyScan query 06:04:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:04:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:40 Parameters OK 06:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:40 Set A/D data flow result=40 06:04:40 Set A/D channel type result=40 06:04:40 Set A/D encoding result=40 06:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:40 Set channel filter=0.000000e+000 result=40 06:04:40 Config A/D Result=40 06:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:40 Get A/D filter: -9.255963e+061 result=40 06:04:40 Get A/D value=-858993460 result=40 06:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:40 Parameters OK 06:04:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:40 Set A/D data flow result=40 06:04:40 Set A/D channel type result=40 06:04:40 Set A/D encoding result=40 06:04:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:40 Set channel filter=0.000000e+000 result=40 06:04:40 Config A/D Result=40 06:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:40 Get A/D filter: -9.255963e+061 result=40 06:04:40 Get A/D value=-858993460 result=40 06:04:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:40 Aux= 06:04:40 Message to Camera, serial 267427 queued 06:05:17 Received message from Master: op=PointingHead serial=267440 06:05:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:05:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:05:18 Point started: ret=0 06:05:18 point_skyscan result=0 06:05:18 Check angles 06:05:18 SkyScan query 06:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:05:19 Message to Master queued w/err=0: serial=267440 error=0 06:05:24 Received message from Master: op=Filter serial=267441 06:05:24 Color wheel filter change from 0 to 0 06:05:24 FLIGetFilterPos err=0 currentPosition=0 06:05:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:24 Filter is already there-color wheel unchanged 06:05:24 Received message from Master: op=Shutter serial=267442 06:05:24 Shutter LASER close 06:05:24 Received message from Camera: op=State serial=267444 06:05:24 GetSingleValue result=40 Value=cccccccc 06:05:24 SkyScan query 06:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:05:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:25 Parameters OK 06:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:25 Set A/D data flow result=40 06:05:25 Set A/D channel type result=40 06:05:25 Set A/D encoding result=40 06:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:25 Set channel filter=0.000000e+000 result=40 06:05:25 Config A/D Result=40 06:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:25 Get A/D filter: -9.255963e+061 result=40 06:05:25 Get A/D value=-858993460 result=40 06:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:25 Parameters OK 06:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:25 Set A/D data flow result=40 06:05:25 Set A/D channel type result=40 06:05:25 Set A/D encoding result=40 06:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:25 Set channel filter=0.000000e+000 result=40 06:05:25 Config A/D Result=40 06:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:25 Get A/D filter: -9.255963e+061 result=40 06:05:25 Get A/D value=-858993460 result=40 06:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:25 Aux= 06:05:25 Message to Camera, serial 267444 queued 06:06:02 Received message from Master: op=PointingHead serial=267457 06:06:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:06:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:06:02 Point started: ret=0 06:06:02 point_skyscan result=0 06:06:03 Check angles 06:06:03 SkyScan query 06:06:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 06:06:03 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 06:06:03 Check angles 06:06:03 SkyScan query 06:06:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 06:06:04 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 06:06:04 Check angles 06:06:04 SkyScan query 06:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 06:06:05 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 06:06:05 Check angles 06:06:05 SkyScan query 06:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 06:06:05 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 06:06:06 Check angles 06:06:06 SkyScan query 06:06:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 06:06:06 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 06:06:06 Check angles 06:06:06 SkyScan query 06:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 06:06:07 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 06:06:07 Check angles 06:06:07 SkyScan query 06:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 06:06:08 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 06:06:08 Check angles 06:06:08 SkyScan query 06:06:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 06:06:08 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 06:06:09 Check angles 06:06:09 SkyScan query 06:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:06:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:06:09 Message to Master queued w/err=0: serial=267457 error=0 06:06:14 Received message from Master: op=Filter serial=267458 06:06:14 Color wheel filter change from 0 to 0 06:06:14 FLIGetFilterPos err=0 currentPosition=0 06:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:14 Filter is already there-color wheel unchanged 06:06:14 Received message from Master: op=Shutter serial=267459 06:06:14 Shutter LASER open 06:06:15 Received message from Camera: op=State serial=267461 06:06:15 GetSingleValue result=40 Value=cccccccc 06:06:15 SkyScan query 06:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:15 Parameters OK 06:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:15 Set A/D data flow result=40 06:06:15 Set A/D channel type result=40 06:06:15 Set A/D encoding result=40 06:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:15 Set channel filter=0.000000e+000 result=40 06:06:15 Config A/D Result=40 06:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:15 Get A/D filter: -9.255963e+061 result=40 06:06:15 Get A/D value=-858993460 result=40 06:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:15 Parameters OK 06:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:15 Set A/D data flow result=40 06:06:15 Set A/D channel type result=40 06:06:15 Set A/D encoding result=40 06:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:15 Set channel filter=0.000000e+000 result=40 06:06:15 Config A/D Result=40 06:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:15 Get A/D filter: -9.255963e+061 result=40 06:06:15 Get A/D value=-858993460 result=40 06:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:15 Aux= 06:06:15 Message to Camera, serial 267461 queued 06:06:24 Received message from Master: op=Shutter serial=267471 06:06:24 Shutter LASER close 06:06:24 Received message from Master: op=PointingHead serial=267475 06:06:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:06:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:06:25 Point started: ret=0 06:06:25 point_skyscan result=0 06:06:25 Check angles 06:06:25 SkyScan query 06:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 06:06:26 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 06:06:26 Check angles 06:06:26 SkyScan query 06:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 06:06:27 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 06:06:27 Check angles 06:06:27 SkyScan query 06:06:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 06:06:27 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 06:06:28 Check angles 06:06:28 SkyScan query 06:06:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 06:06:28 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 06:06:28 Check angles 06:06:28 SkyScan query 06:06:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.715<-15981 Statuses=0008 0009 06:06:29 Msec=3000 True Az=112.995 Ze=-59.715 Az status=0008 Ze status=0009 06:06:29 Check angles 06:06:29 SkyScan query 06:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.76<-14584 Statuses=0008 0009 06:06:30 Msec=3750 True Az=112.995 Ze=-38.76 Az status=0008 Ze status=0009 06:06:30 Check angles 06:06:30 SkyScan query 06:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.79<-13186 Statuses=0008 0009 06:06:30 Msec=4500 True Az=112.995 Ze=-17.79 Az status=0008 Ze status=0009 06:06:31 Check angles 06:06:31 SkyScan query 06:06:31 SkyScan query done: ret=0 az=112.995<-7533 ze=3.18<-11788 Statuses=0008 0009 06:06:31 Msec=5250 True Az=112.995 Ze=3.18 Az status=0008 Ze status=0009 06:06:31 Check angles 06:06:31 SkyScan query 06:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:06:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:06:32 Message to Master queued w/err=0: serial=267475 error=0 06:06:37 Received message from Master: op=Filter serial=267476 06:06:37 Color wheel filter change from 0 to 0 06:06:37 FLIGetFilterPos err=0 currentPosition=0 06:06:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:37 Filter is already there-color wheel unchanged 06:06:37 Received message from Master: op=Shutter serial=267477 06:06:37 Shutter LASER close 06:06:37 Received message from Camera: op=State serial=267479 06:06:37 GetSingleValue result=40 Value=cccccccc 06:06:37 SkyScan query 06:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:06:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:38 Parameters OK 06:06:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:38 Set A/D data flow result=40 06:06:38 Set A/D channel type result=40 06:06:38 Set A/D encoding result=40 06:06:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:38 Set channel filter=0.000000e+000 result=40 06:06:38 Config A/D Result=40 06:06:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:38 Get A/D filter: -9.255963e+061 result=40 06:06:38 Get A/D value=-858993460 result=40 06:06:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:38 Parameters OK 06:06:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:38 Set A/D data flow result=40 06:06:38 Set A/D channel type result=40 06:06:38 Set A/D encoding result=40 06:06:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:38 Set channel filter=0.000000e+000 result=40 06:06:38 Config A/D Result=40 06:06:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:38 Get A/D filter: -9.255963e+061 result=40 06:06:38 Get A/D value=-858993460 result=40 06:06:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:38 Aux= 06:06:38 Message to Camera, serial 267479 queued 06:07:15 Received message from Master: op=PointingHead serial=267492 06:07:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:07:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:07:15 Point started: ret=0 06:07:15 point_skyscan result=0 06:07:16 Check angles 06:07:16 SkyScan query 06:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:07:16 Message to Master queued w/err=0: serial=267492 error=0 06:07:21 Received message from Master: op=Filter serial=267493 06:07:21 Color wheel filter change from 0 to 0 06:07:21 FLIGetFilterPos err=0 currentPosition=0 06:07:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:21 Filter is already there-color wheel unchanged 06:07:21 Received message from Master: op=Shutter serial=267494 06:07:21 Shutter LASER close 06:07:21 Received message from Camera: op=State serial=267496 06:07:21 GetSingleValue result=40 Value=cccccccc 06:07:21 SkyScan query 06:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:07:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:22 Parameters OK 06:07:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:22 Set A/D data flow result=40 06:07:22 Set A/D channel type result=40 06:07:22 Set A/D encoding result=40 06:07:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:22 Set channel filter=0.000000e+000 result=40 06:07:22 Config A/D Result=40 06:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:22 Get A/D filter: -9.255963e+061 result=40 06:07:22 Get A/D value=-858993460 result=40 06:07:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:22 Parameters OK 06:07:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:22 Set A/D data flow result=40 06:07:22 Set A/D channel type result=40 06:07:22 Set A/D encoding result=40 06:07:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:22 Set channel filter=0.000000e+000 result=40 06:07:22 Config A/D Result=40 06:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:22 Get A/D filter: -9.255963e+061 result=40 06:07:22 Get A/D value=-858993460 result=40 06:07:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:22 Aux= 06:07:22 Message to Camera, serial 267496 queued 06:07:59 Received message from Master: op=PointingHead serial=267509 06:07:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:07:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:07:59 Point started: ret=0 06:07:59 point_skyscan result=0 06:08:00 Check angles 06:08:00 SkyScan query 06:08:01 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 06:08:01 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 06:08:01 Check angles 06:08:01 SkyScan query 06:08:01 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 06:08:01 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 06:08:02 Check angles 06:08:02 SkyScan query 06:08:02 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 06:08:02 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 06:08:02 Check angles 06:08:02 SkyScan query 06:08:03 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:08:03 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:08:03 Message to Master queued w/err=0: serial=267509 error=0 06:08:08 Received message from Master: op=Filter serial=267510 06:08:08 Color wheel filter change from 0 to 0 06:08:08 FLIGetFilterPos err=0 currentPosition=0 06:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:08 Filter is already there-color wheel unchanged 06:08:08 Received message from Master: op=Shutter serial=267511 06:08:08 Shutter LASER close 06:08:08 Received message from Camera: op=State serial=267513 06:08:08 GetSingleValue result=40 Value=cccccccc 06:08:08 SkyScan query 06:08:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:08:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:09 Parameters OK 06:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:09 Set A/D data flow result=40 06:08:09 Set A/D channel type result=40 06:08:09 Set A/D encoding result=40 06:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:09 Set channel filter=0.000000e+000 result=40 06:08:09 Config A/D Result=40 06:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:09 Get A/D filter: -9.255963e+061 result=40 06:08:09 Get A/D value=-858993460 result=40 06:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:09 Parameters OK 06:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:09 Set A/D data flow result=40 06:08:09 Set A/D channel type result=40 06:08:09 Set A/D encoding result=40 06:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:09 Set channel filter=0.000000e+000 result=40 06:08:09 Config A/D Result=40 06:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:09 Get A/D filter: -9.255963e+061 result=40 06:08:09 Get A/D value=-858993460 result=40 06:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:09 Aux= 06:08:09 Message to Camera, serial 267513 queued 06:08:46 Received message from Master: op=PointingHead serial=267526 06:08:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:08:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:08:46 Point started: ret=0 06:08:46 point_skyscan result=0 06:08:47 Check angles 06:08:47 SkyScan query 06:08:47 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 06:08:47 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 06:08:47 Check angles 06:08:47 SkyScan query 06:08:48 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 06:08:48 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 06:08:48 Check angles 06:08:48 SkyScan query 06:08:49 SkyScan query done: ret=0 az=117.75<-7850 ze=6.495<-11567 Statuses=0009 0008 06:08:49 Msec=1500 True Az=117.75 Ze=6.495 Az status=0009 Ze status=0008 06:08:49 Check angles 06:08:49 SkyScan query 06:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:49 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:08:49 Message to Master queued w/err=0: serial=267526 error=0 06:08:54 Received message from Master: op=Filter serial=267527 06:08:54 Color wheel filter change from 0 to 0 06:08:54 FLIGetFilterPos err=0 currentPosition=0 06:08:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:54 Filter is already there-color wheel unchanged 06:08:55 Received message from Master: op=Shutter serial=267528 06:08:55 Shutter LASER close 06:08:55 Received message from Camera: op=State serial=267530 06:08:55 GetSingleValue result=40 Value=cccccccc 06:08:55 SkyScan query 06:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:08:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:55 Parameters OK 06:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:55 Set A/D data flow result=40 06:08:55 Set A/D channel type result=40 06:08:55 Set A/D encoding result=40 06:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:55 Set channel filter=0.000000e+000 result=40 06:08:55 Config A/D Result=40 06:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:55 Get A/D filter: -9.255963e+061 result=40 06:08:55 Get A/D value=-858993460 result=40 06:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:55 Parameters OK 06:08:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:55 Set A/D data flow result=40 06:08:55 Set A/D channel type result=40 06:08:55 Set A/D encoding result=40 06:08:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:55 Set channel filter=0.000000e+000 result=40 06:08:55 Config A/D Result=40 06:08:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:55 Get A/D filter: -9.255963e+061 result=40 06:08:55 Get A/D value=-858993460 result=40 06:08:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:55 Aux= 06:08:55 Message to Camera, serial 267530 queued 06:09:31 Received message from Master: op=PointingHead serial=267542 06:09:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:09:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:09:32 Point started: ret=0 06:09:32 point_skyscan result=0 06:09:32 Check angles 06:09:32 SkyScan query 06:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 06:09:33 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 06:09:33 Check angles 06:09:33 SkyScan query 06:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.135<-15009 Statuses=0008 0009 06:09:34 Msec=750 True Az=112.995 Ze=-45.135 Az status=0008 Ze status=0009 06:09:34 Check angles 06:09:34 SkyScan query 06:09:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 06:09:34 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 06:09:35 Check angles 06:09:35 SkyScan query 06:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 06:09:35 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 06:09:35 Check angles 06:09:35 SkyScan query 06:09:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.45<-19230 Statuses=0008 0009 06:09:36 Msec=3000 True Az=112.995 Ze=-108.45 Az status=0008 Ze status=0009 06:09:36 Check angles 06:09:36 SkyScan query 06:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 06:09:37 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 06:09:37 Check angles 06:09:37 SkyScan query 06:09:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 06:09:37 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 06:09:38 Check angles 06:09:38 SkyScan query 06:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 06:09:38 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 06:09:38 Check angles 06:09:38 SkyScan query 06:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:09:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:09:39 Message to Master queued w/err=0: serial=267542 error=0 06:09:44 Received message from Master: op=Filter serial=267543 06:09:44 Color wheel filter change from 0 to 0 06:09:44 FLIGetFilterPos err=0 currentPosition=0 06:09:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:44 Filter is already there-color wheel unchanged 06:09:44 Received message from Master: op=Shutter serial=267544 06:09:44 Shutter LASER open 06:09:44 Received message from Camera: op=State serial=267546 06:09:44 GetSingleValue result=40 Value=cccccccc 06:09:44 SkyScan query 06:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:09:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:45 Parameters OK 06:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:45 Set A/D data flow result=40 06:09:45 Set A/D channel type result=40 06:09:45 Set A/D encoding result=40 06:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:45 Set channel filter=0.000000e+000 result=40 06:09:45 Config A/D Result=40 06:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:45 Get A/D filter: -9.255963e+061 result=40 06:09:45 Get A/D value=-858993460 result=40 06:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:45 Parameters OK 06:09:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:45 Set A/D data flow result=40 06:09:45 Set A/D channel type result=40 06:09:45 Set A/D encoding result=40 06:09:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:45 Set channel filter=0.000000e+000 result=40 06:09:45 Config A/D Result=40 06:09:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:45 Get A/D filter: -9.255963e+061 result=40 06:09:45 Get A/D value=-858993460 result=40 06:09:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:45 Aux= 06:09:45 Message to Camera, serial 267546 queued 06:09:53 Received message from Master: op=Shutter serial=267556 06:09:53 Shutter LASER close 06:09:54 Received message from Master: op=PointingHead serial=267560 06:09:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:09:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:09:54 Point started: ret=0 06:09:54 point_skyscan result=0 06:09:55 Check angles 06:09:55 SkyScan query 06:09:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 06:09:55 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 06:09:56 Check angles 06:09:56 SkyScan query 06:09:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 06:09:56 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 06:09:56 Check angles 06:09:56 SkyScan query 06:09:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.16<-18744 Statuses=0008 0009 06:09:57 Msec=1500 True Az=112.995 Ze=-101.16 Az status=0008 Ze status=0009 06:09:57 Check angles 06:09:57 SkyScan query 06:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 06:09:58 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 06:09:58 Check angles 06:09:58 SkyScan query 06:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.235<-15949 Statuses=0008 0009 06:09:58 Msec=3000 True Az=112.995 Ze=-59.235 Az status=0008 Ze status=0009 06:09:59 Check angles 06:09:59 SkyScan query 06:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 06:09:59 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 06:09:59 Check angles 06:09:59 SkyScan query 06:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 06:10:00 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 06:10:00 Check angles 06:10:00 SkyScan query 06:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 06:10:01 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 06:10:01 Check angles 06:10:01 SkyScan query 06:10:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:10:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:10:01 Message to Master queued w/err=0: serial=267560 error=0 06:10:06 Received message from Master: op=Filter serial=267561 06:10:06 Color wheel filter change from 0 to 0 06:10:06 FLIGetFilterPos err=0 currentPosition=0 06:10:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:06 Filter is already there-color wheel unchanged 06:10:07 Received message from Master: op=Shutter serial=267562 06:10:07 Shutter LASER close 06:10:07 Received message from Camera: op=State serial=267564 06:10:07 GetSingleValue result=40 Value=cccccccc 06:10:07 SkyScan query 06:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:07 Parameters OK 06:10:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:07 Set A/D data flow result=40 06:10:07 Set A/D channel type result=40 06:10:07 Set A/D encoding result=40 06:10:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:07 Set channel filter=0.000000e+000 result=40 06:10:07 Config A/D Result=40 06:10:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:07 Get A/D filter: -9.255963e+061 result=40 06:10:07 Get A/D value=-858993460 result=40 06:10:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:07 Parameters OK 06:10:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:07 Set A/D data flow result=40 06:10:07 Set A/D channel type result=40 06:10:07 Set A/D encoding result=40 06:10:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:07 Set channel filter=0.000000e+000 result=40 06:10:07 Config A/D Result=40 06:10:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:07 Get A/D filter: -9.255963e+061 result=40 06:10:07 Get A/D value=-858993460 result=40 06:10:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:07 Aux= 06:10:07 Message to Camera, serial 267564 queued 06:10:44 Received message from Master: op=PointingHead serial=267577 06:10:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:10:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:10:44 Point started: ret=0 06:10:44 point_skyscan result=0 06:10:45 Check angles 06:10:45 SkyScan query 06:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:10:46 Message to Master queued w/err=0: serial=267577 error=0 06:10:51 Received message from Master: op=Filter serial=267578 06:10:51 Color wheel filter change from 0 to 0 06:10:51 FLIGetFilterPos err=0 currentPosition=0 06:10:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:51 Filter is already there-color wheel unchanged 06:10:51 Received message from Master: op=Shutter serial=267579 06:10:51 Shutter LASER close 06:10:51 Received message from Camera: op=State serial=267581 06:10:51 GetSingleValue result=40 Value=cccccccc 06:10:51 SkyScan query 06:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:10:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:52 Parameters OK 06:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:52 Set A/D data flow result=40 06:10:52 Set A/D channel type result=40 06:10:52 Set A/D encoding result=40 06:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:52 Set channel filter=0.000000e+000 result=40 06:10:52 Config A/D Result=40 06:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:52 Get A/D filter: -9.255963e+061 result=40 06:10:52 Get A/D value=-858993460 result=40 06:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:52 Parameters OK 06:10:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:52 Set A/D data flow result=40 06:10:52 Set A/D channel type result=40 06:10:52 Set A/D encoding result=40 06:10:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:52 Set channel filter=0.000000e+000 result=40 06:10:52 Config A/D Result=40 06:10:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:52 Get A/D filter: -9.255963e+061 result=40 06:10:52 Get A/D value=-858993460 result=40 06:10:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:52 Aux= 06:10:52 Message to Camera, serial 267581 queued 06:11:28 Received message from Master: op=PointingHead serial=267594 06:11:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:11:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:11:29 Point started: ret=0 06:11:29 point_skyscan result=0 06:11:30 Check angles 06:11:30 SkyScan query 06:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:11:30 Message to Master queued w/err=0: serial=267594 error=0 06:11:35 Received message from Master: op=Filter serial=267595 06:11:35 Color wheel filter change from 0 to 0 06:11:35 FLIGetFilterPos err=0 currentPosition=0 06:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:35 Filter is already there-color wheel unchanged 06:11:35 Received message from Master: op=Shutter serial=267596 06:11:35 Shutter LASER close 06:11:35 Received message from Camera: op=State serial=267598 06:11:35 GetSingleValue result=40 Value=cccccccc 06:11:35 SkyScan query 06:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:36 Parameters OK 06:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:36 Set A/D data flow result=40 06:11:36 Set A/D channel type result=40 06:11:36 Set A/D encoding result=40 06:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:36 Set channel filter=0.000000e+000 result=40 06:11:36 Config A/D Result=40 06:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:36 Get A/D filter: -9.255963e+061 result=40 06:11:36 Get A/D value=-858993460 result=40 06:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:36 Parameters OK 06:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:36 Set A/D data flow result=40 06:11:36 Set A/D channel type result=40 06:11:36 Set A/D encoding result=40 06:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:36 Set channel filter=0.000000e+000 result=40 06:11:36 Config A/D Result=40 06:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:36 Get A/D filter: -9.255963e+061 result=40 06:11:36 Get A/D value=-858993460 result=40 06:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:36 Aux= 06:11:36 Message to Camera, serial 267598 queued 06:12:13 Received message from Master: op=PointingHead serial=267611 06:12:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:12:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:12:13 Point started: ret=0 06:12:13 point_skyscan result=0 06:12:14 Check angles 06:12:14 SkyScan query 06:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:12:14 Message to Master queued w/err=0: serial=267611 error=0 06:12:19 Received message from Master: op=Filter serial=267612 06:12:19 Color wheel filter change from 0 to 0 06:12:19 FLIGetFilterPos err=0 currentPosition=0 06:12:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:19 Filter is already there-color wheel unchanged 06:12:20 Received message from Master: op=Shutter serial=267613 06:12:20 Shutter LASER close 06:12:20 Received message from Camera: op=State serial=267615 06:12:20 GetSingleValue result=40 Value=cccccccc 06:12:20 SkyScan query 06:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:12:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:20 Parameters OK 06:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:20 Set A/D data flow result=40 06:12:20 Set A/D channel type result=40 06:12:20 Set A/D encoding result=40 06:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:20 Set channel filter=0.000000e+000 result=40 06:12:20 Config A/D Result=40 06:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:20 Get A/D filter: -9.255963e+061 result=40 06:12:20 Get A/D value=-858993460 result=40 06:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:20 Parameters OK 06:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:20 Set A/D data flow result=40 06:12:20 Set A/D channel type result=40 06:12:20 Set A/D encoding result=40 06:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:20 Set channel filter=0.000000e+000 result=40 06:12:20 Config A/D Result=40 06:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:20 Get A/D filter: -9.255963e+061 result=40 06:12:20 Get A/D value=-858993460 result=40 06:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:20 Aux= 06:12:20 Message to Camera, serial 267615 queued 06:12:57 Received message from Master: op=PointingHead serial=267628 06:12:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:12:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:12:57 Point started: ret=0 06:12:57 point_skyscan result=0 06:12:58 Check angles 06:12:58 SkyScan query 06:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 06:12:59 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 06:12:59 Check angles 06:12:59 SkyScan query 06:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 06:12:59 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 06:13:00 Check angles 06:13:00 SkyScan query 06:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 06:13:00 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 06:13:00 Check angles 06:13:00 SkyScan query 06:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 06:13:01 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 06:13:01 Check angles 06:13:01 SkyScan query 06:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 06:13:02 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 06:13:02 Check angles 06:13:02 SkyScan query 06:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 06:13:02 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 06:13:03 Check angles 06:13:03 SkyScan query 06:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 06:13:03 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 06:13:03 Check angles 06:13:03 SkyScan query 06:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.385<-23359 Statuses=0008 0009 06:13:04 Msec=5250 True Az=112.995 Ze=-170.385 Az status=0008 Ze status=0009 06:13:04 Check angles 06:13:04 SkyScan query 06:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:13:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:13:05 Message to Master queued w/err=0: serial=267628 error=0 06:13:10 Received message from Master: op=Filter serial=267629 06:13:10 Color wheel filter change from 0 to 0 06:13:10 FLIGetFilterPos err=0 currentPosition=0 06:13:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:10 Filter is already there-color wheel unchanged 06:13:10 Received message from Master: op=Shutter serial=267630 06:13:10 Shutter LASER open 06:13:10 Received message from Camera: op=State serial=267632 06:13:10 GetSingleValue result=40 Value=cccccccc 06:13:10 SkyScan query 06:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:13:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:11 Parameters OK 06:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:11 Set A/D data flow result=40 06:13:11 Set A/D channel type result=40 06:13:11 Set A/D encoding result=40 06:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:11 Set channel filter=0.000000e+000 result=40 06:13:11 Config A/D Result=40 06:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:11 Get A/D filter: -9.255963e+061 result=40 06:13:11 Get A/D value=-858993460 result=40 06:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:11 Parameters OK 06:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:11 Set A/D data flow result=40 06:13:11 Set A/D channel type result=40 06:13:11 Set A/D encoding result=40 06:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:11 Set channel filter=0.000000e+000 result=40 06:13:11 Config A/D Result=40 06:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:11 Get A/D filter: -9.255963e+061 result=40 06:13:11 Get A/D value=-858993460 result=40 06:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:11 Aux= 06:13:11 Message to Camera, serial 267632 queued 06:13:18 Received message from Master: op=Shutter serial=267641 06:13:18 Shutter LASER close 06:13:19 Received message from Master: op=PointingHead serial=267645 06:13:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:13:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:13:19 Point started: ret=0 06:13:19 point_skyscan result=0 06:13:20 Check angles 06:13:20 SkyScan query 06:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 06:13:20 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 06:13:21 Check angles 06:13:21 SkyScan query 06:13:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 06:13:21 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 06:13:21 Check angles 06:13:21 SkyScan query 06:13:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 06:13:22 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 06:13:22 Check angles 06:13:22 SkyScan query 06:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 06:13:23 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 06:13:23 Check angles 06:13:23 SkyScan query 06:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 06:13:23 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 06:13:24 Check angles 06:13:24 SkyScan query 06:13:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 06:13:24 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 06:13:24 Check angles 06:13:24 SkyScan query 06:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.28<-13152 Statuses=0008 0009 06:13:25 Msec=4500 True Az=112.995 Ze=-17.28 Az status=0008 Ze status=0009 06:13:25 Check angles 06:13:25 SkyScan query 06:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 06:13:26 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 06:13:26 Check angles 06:13:26 SkyScan query 06:13:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:13:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:13:26 Message to Master queued w/err=0: serial=267645 error=0 06:13:31 Received message from Master: op=Filter serial=267646 06:13:31 Color wheel filter change from 0 to 0 06:13:31 FLIGetFilterPos err=0 currentPosition=0 06:13:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:31 Filter is already there-color wheel unchanged 06:13:32 Received message from Master: op=Shutter serial=267647 06:13:32 Shutter LASER close 06:13:32 Received message from Camera: op=State serial=267649 06:13:32 GetSingleValue result=40 Value=cccccccc 06:13:32 SkyScan query 06:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:13:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:32 Parameters OK 06:13:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:32 Set A/D data flow result=40 06:13:32 Set A/D channel type result=40 06:13:32 Set A/D encoding result=40 06:13:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:32 Set channel filter=0.000000e+000 result=40 06:13:32 Config A/D Result=40 06:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:32 Get A/D filter: -9.255963e+061 result=40 06:13:32 Get A/D value=-858993460 result=40 06:13:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:32 Parameters OK 06:13:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:32 Set A/D data flow result=40 06:13:32 Set A/D channel type result=40 06:13:32 Set A/D encoding result=40 06:13:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:32 Set channel filter=0.000000e+000 result=40 06:13:32 Config A/D Result=40 06:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:32 Get A/D filter: -9.255963e+061 result=40 06:13:32 Get A/D value=-858993460 result=40 06:13:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:32 Aux= 06:13:32 Message to Camera, serial 267649 queued 06:14:09 Received message from Master: op=PointingHead serial=267662 06:14:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:14:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:14:09 Point started: ret=0 06:14:09 point_skyscan result=0 06:14:10 Check angles 06:14:10 SkyScan query 06:14:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:14:11 Message to Master queued w/err=0: serial=267662 error=0 06:14:16 Received message from Master: op=Filter serial=267663 06:14:16 Color wheel filter change from 0 to 0 [UTC 2019-3-14 06:14:16] 06:14:16 FLIGetFilterPos err=0 currentPosition=0 06:14:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:16 Filter is already there-color wheel unchanged 06:14:16 Received message from Master: op=Shutter serial=267664 06:14:16 Shutter LASER close 06:14:16 Received message from Camera: op=State serial=267666 06:14:16 GetSingleValue result=40 Value=cccccccc 06:14:16 SkyScan query 06:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:17 Parameters OK 06:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:17 Set A/D data flow result=40 06:14:17 Set A/D channel type result=40 06:14:17 Set A/D encoding result=40 06:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:17 Set channel filter=0.000000e+000 result=40 06:14:17 Config A/D Result=40 06:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:17 Get A/D filter: -9.255963e+061 result=40 06:14:17 Get A/D value=-858993460 result=40 06:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:17 Parameters OK 06:14:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:17 Set A/D data flow result=40 06:14:17 Set A/D channel type result=40 06:14:17 Set A/D encoding result=40 06:14:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:17 Set channel filter=0.000000e+000 result=40 06:14:17 Config A/D Result=40 06:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:17 Get A/D filter: -9.255963e+061 result=40 06:14:17 Get A/D value=-858993460 result=40 06:14:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:17 Aux= 06:14:17 Message to Camera, serial 267666 queued 06:14:53 Received message from Master: op=PointingHead serial=267679 06:14:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:14:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:14:54 Point started: ret=0 06:14:54 point_skyscan result=0 06:14:55 Check angles 06:14:55 SkyScan query 06:14:55 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 06:14:55 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 06:14:55 Check angles 06:14:55 SkyScan query 06:14:56 SkyScan query done: ret=0 az=153.165<-10211 ze=-6.495<-12433 Statuses=0009 0008 06:14:56 Msec=750 True Az=153.165 Ze=-6.495 Az status=0009 Ze status=0008 06:14:56 Check angles 06:14:56 SkyScan query 06:14:57 SkyScan query done: ret=0 az=170.73<-11382 ze=-6.495<-12433 Statuses=0009 0008 06:14:57 Msec=1500 True Az=170.73 Ze=-6.495 Az status=0009 Ze status=0008 06:14:57 Check angles 06:14:57 SkyScan query 06:14:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:14:57 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:14:57 Message to Master queued w/err=0: serial=267679 error=0 06:15:02 Received message from Master: op=Filter serial=267680 06:15:02 Color wheel filter change from 0 to 0 06:15:02 FLIGetFilterPos err=0 currentPosition=0 06:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:02 Filter is already there-color wheel unchanged 06:15:03 Received message from Master: op=Shutter serial=267681 06:15:03 Shutter LASER close 06:15:03 Received message from Camera: op=State serial=267683 06:15:03 GetSingleValue result=40 Value=cccccccc 06:15:03 SkyScan query 06:15:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:03 Parameters OK 06:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:03 Set A/D data flow result=40 06:15:03 Set A/D channel type result=40 06:15:03 Set A/D encoding result=40 06:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:03 Set channel filter=0.000000e+000 result=40 06:15:03 Config A/D Result=40 06:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:03 Get A/D filter: -9.255963e+061 result=40 06:15:03 Get A/D value=-858993460 result=40 06:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:03 Parameters OK 06:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:03 Set A/D data flow result=40 06:15:03 Set A/D channel type result=40 06:15:03 Set A/D encoding result=40 06:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:03 Set channel filter=0.000000e+000 result=40 06:15:03 Config A/D Result=40 06:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:03 Get A/D filter: -9.255963e+061 result=40 06:15:03 Get A/D value=-858993460 result=40 06:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:03 Aux= 06:15:03 Message to Camera, serial 267683 queued 06:15:40 Received message from Master: op=PointingHead serial=267696 06:15:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:15:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:15:40 Point started: ret=0 06:15:40 point_skyscan result=0 06:15:41 Check angles 06:15:41 SkyScan query 06:15:42 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 06:15:42 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 06:15:42 Check angles 06:15:42 SkyScan query 06:15:42 SkyScan query done: ret=0 az=135.42<-9028 ze=6.495<-11567 Statuses=0009 0008 06:15:42 Msec=750 True Az=135.42 Ze=6.495 Az status=0009 Ze status=0008 06:15:43 Check angles 06:15:43 SkyScan query 06:15:43 SkyScan query done: ret=0 az=117.915<-7861 ze=6.495<-11567 Statuses=0009 0008 06:15:43 Msec=1500 True Az=117.915 Ze=6.495 Az status=0009 Ze status=0008 06:15:43 Check angles 06:15:43 SkyScan query 06:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:15:44 Message to Master queued w/err=0: serial=267696 error=0 06:15:49 Received message from Master: op=Filter serial=267697 06:15:49 Color wheel filter change from 0 to 0 06:15:49 FLIGetFilterPos err=0 currentPosition=0 06:15:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:49 Filter is already there-color wheel unchanged 06:15:49 Received message from Master: op=Shutter serial=267698 06:15:49 Shutter LASER close 06:15:49 Received message from Camera: op=State serial=267700 06:15:49 GetSingleValue result=40 Value=cccccccc 06:15:49 SkyScan query 06:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:50 Parameters OK 06:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:50 Set A/D data flow result=40 06:15:50 Set A/D channel type result=40 06:15:50 Set A/D encoding result=40 06:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:50 Set channel filter=0.000000e+000 result=40 06:15:50 Config A/D Result=40 06:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:50 Get A/D filter: -9.255963e+061 result=40 06:15:50 Get A/D value=-858993460 result=40 06:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:50 Parameters OK 06:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:50 Set A/D data flow result=40 06:15:50 Set A/D channel type result=40 06:15:50 Set A/D encoding result=40 06:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:50 Set channel filter=0.000000e+000 result=40 06:15:50 Config A/D Result=40 06:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:50 Get A/D filter: -9.255963e+061 result=40 06:15:50 Get A/D value=-858993460 result=40 06:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:50 Aux= 06:15:50 Message to Camera, serial 267700 queued 06:16:27 Received message from Master: op=PointingHead serial=267713 06:16:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:16:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:16:27 Point started: ret=0 06:16:27 point_skyscan result=0 06:16:28 Check angles 06:16:28 SkyScan query 06:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 06:16:28 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 06:16:28 Check angles 06:16:28 SkyScan query 06:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.105<-15007 Statuses=0008 0009 06:16:29 Msec=750 True Az=112.995 Ze=-45.105 Az status=0008 Ze status=0009 06:16:29 Check angles 06:16:29 SkyScan query 06:16:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 06:16:30 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 06:16:30 Check angles 06:16:30 SkyScan query 06:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.51<-17834 Statuses=0008 0009 06:16:31 Msec=2250 True Az=112.995 Ze=-87.51 Az status=0008 Ze status=0009 06:16:31 Check angles 06:16:31 SkyScan query 06:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.435<-19229 Statuses=0008 0009 06:16:31 Msec=3000 True Az=112.995 Ze=-108.435 Az status=0008 Ze status=0009 06:16:31 Check angles 06:16:31 SkyScan query 06:16:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 06:16:32 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 06:16:32 Check angles 06:16:32 SkyScan query 06:16:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 06:16:33 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 06:16:33 Check angles 06:16:33 SkyScan query 06:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 06:16:34 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 06:16:34 Check angles 06:16:34 SkyScan query 06:16:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:16:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:16:34 Message to Master queued w/err=0: serial=267713 error=0 06:16:39 Received message from Master: op=Filter serial=267714 06:16:39 Color wheel filter change from 0 to 0 06:16:39 FLIGetFilterPos err=0 currentPosition=0 06:16:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:39 Filter is already there-color wheel unchanged 06:16:39 Received message from Master: op=Shutter serial=267715 06:16:39 Shutter LASER open 06:16:40 Received message from Camera: op=State serial=267717 06:16:40 GetSingleValue result=40 Value=cccccccc 06:16:40 SkyScan query 06:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:16:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:40 Parameters OK 06:16:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:40 Set A/D data flow result=40 06:16:40 Set A/D channel type result=40 06:16:40 Set A/D encoding result=40 06:16:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:40 Set channel filter=0.000000e+000 result=40 06:16:40 Config A/D Result=40 06:16:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:40 Get A/D filter: -9.255963e+061 result=40 06:16:40 Get A/D value=-858993460 result=40 06:16:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:40 Parameters OK 06:16:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:40 Set A/D data flow result=40 06:16:40 Set A/D channel type result=40 06:16:40 Set A/D encoding result=40 06:16:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:40 Set channel filter=0.000000e+000 result=40 06:16:40 Config A/D Result=40 06:16:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:40 Get A/D filter: -9.255963e+061 result=40 06:16:40 Get A/D value=-858993460 result=40 06:16:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:40 Aux= 06:16:40 Message to Camera, serial 267717 queued 06:16:49 Received message from Master: op=Shutter serial=267727 06:16:49 Shutter LASER close 06:16:49 Received message from Master: op=PointingHead serial=267731 06:16:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:16:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:16:49 Point started: ret=0 06:16:49 point_skyscan result=0 06:16:50 Check angles 06:16:50 SkyScan query 06:16:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 06:16:51 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 06:16:51 Check angles 06:16:51 SkyScan query 06:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 06:16:52 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 06:16:52 Check angles 06:16:52 SkyScan query 06:16:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 06:16:52 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 06:16:52 Check angles 06:16:52 SkyScan query 06:16:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 06:16:53 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 06:16:53 Check angles 06:16:53 SkyScan query 06:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 06:16:54 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 06:16:54 Check angles 06:16:54 SkyScan query 06:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 06:16:55 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 06:16:55 Check angles 06:16:55 SkyScan query 06:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 06:16:55 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 06:16:55 Check angles 06:16:55 SkyScan query 06:16:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 06:16:56 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 06:16:56 Check angles 06:16:56 SkyScan query 06:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:16:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:16:57 Message to Master queued w/err=0: serial=267731 error=0 06:17:02 Received message from Master: op=Filter serial=267732 06:17:02 Color wheel filter change from 0 to 0 06:17:02 FLIGetFilterPos err=0 currentPosition=0 06:17:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:02 Filter is already there-color wheel unchanged 06:17:02 Received message from Master: op=Shutter serial=267733 06:17:02 Shutter LASER close 06:17:02 Received message from Camera: op=State serial=267735 06:17:02 GetSingleValue result=40 Value=cccccccc 06:17:02 SkyScan query 06:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:03 Parameters OK 06:17:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:03 Set A/D data flow result=40 06:17:03 Set A/D channel type result=40 06:17:03 Set A/D encoding result=40 06:17:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:03 Set channel filter=0.000000e+000 result=40 06:17:03 Config A/D Result=40 06:17:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:03 Get A/D filter: -9.255963e+061 result=40 06:17:03 Get A/D value=-858993460 result=40 06:17:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:03 Parameters OK 06:17:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:03 Set A/D data flow result=40 06:17:03 Set A/D channel type result=40 06:17:03 Set A/D encoding result=40 06:17:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:03 Set channel filter=0.000000e+000 result=40 06:17:03 Config A/D Result=40 06:17:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:03 Get A/D filter: -9.255963e+061 result=40 06:17:03 Get A/D value=-858993460 result=40 06:17:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:03 Aux= 06:17:03 Message to Camera, serial 267735 queued 06:17:40 Received message from Master: op=PointingHead serial=267748 06:17:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:17:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:17:40 Point started: ret=0 06:17:40 point_skyscan result=0 06:17:41 Check angles 06:17:41 SkyScan query 06:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:17:41 Message to Master queued w/err=0: serial=267748 error=0 06:17:46 Received message from Master: op=Filter serial=267749 06:17:46 Color wheel filter change from 0 to 0 06:17:46 FLIGetFilterPos err=0 currentPosition=0 06:17:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:46 Filter is already there-color wheel unchanged 06:17:46 Received message from Master: op=Shutter serial=267750 06:17:46 Shutter LASER close 06:17:46 Received message from Camera: op=State serial=267752 06:17:46 GetSingleValue result=40 Value=cccccccc 06:17:46 SkyScan query 06:17:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:17:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:47 Parameters OK 06:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:47 Set A/D data flow result=40 06:17:47 Set A/D channel type result=40 06:17:47 Set A/D encoding result=40 06:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:47 Set channel filter=0.000000e+000 result=40 06:17:47 Config A/D Result=40 06:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:47 Get A/D filter: -9.255963e+061 result=40 06:17:47 Get A/D value=-858993460 result=40 06:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:47 Parameters OK 06:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:47 Set A/D data flow result=40 06:17:47 Set A/D channel type result=40 06:17:47 Set A/D encoding result=40 06:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:47 Set channel filter=0.000000e+000 result=40 06:17:47 Config A/D Result=40 06:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:47 Get A/D filter: -9.255963e+061 result=40 06:17:47 Get A/D value=-858993460 result=40 06:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:47 Aux= 06:17:47 Message to Camera, serial 267752 queued 06:18:24 Received message from Master: op=PointingHead serial=267765 06:18:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:18:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:18:24 Point started: ret=0 06:18:24 point_skyscan result=0 06:18:25 Check angles 06:18:25 SkyScan query 06:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:18:26 Message to Master queued w/err=0: serial=267765 error=0 06:18:31 Received message from Master: op=Filter serial=267766 06:18:31 Color wheel filter change from 0 to 0 06:18:31 FLIGetFilterPos err=0 currentPosition=0 06:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:31 Filter is already there-color wheel unchanged 06:18:31 Received message from Master: op=Shutter serial=267767 06:18:31 Shutter LASER close 06:18:31 Received message from Camera: op=State serial=267769 06:18:31 GetSingleValue result=40 Value=cccccccc 06:18:31 SkyScan query 06:18:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:18:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:31 Parameters OK 06:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:31 Set A/D data flow result=40 06:18:31 Set A/D channel type result=40 06:18:31 Set A/D encoding result=40 06:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:31 Set channel filter=0.000000e+000 result=40 06:18:31 Config A/D Result=40 06:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:31 Get A/D filter: -9.255963e+061 result=40 06:18:31 Get A/D value=-858993460 result=40 06:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:31 Parameters OK 06:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:31 Set A/D data flow result=40 06:18:31 Set A/D channel type result=40 06:18:31 Set A/D encoding result=40 06:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:31 Set channel filter=0.000000e+000 result=40 06:18:31 Config A/D Result=40 06:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:31 Get A/D filter: -9.255963e+061 result=40 06:18:31 Get A/D value=-858993460 result=40 06:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:31 Aux= 06:18:31 Message to Camera, serial 267769 queued 06:19:07 Received message from Master: op=PointingHead serial=267781 06:19:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:19:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:19:08 Point started: ret=0 06:19:08 point_skyscan result=0 06:19:08 Check angles 06:19:08 SkyScan query 06:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:19:09 Message to Master queued w/err=0: serial=267781 error=0 06:19:14 Received message from Master: op=Filter serial=267782 06:19:14 Color wheel filter change from 0 to 0 06:19:14 FLIGetFilterPos err=0 currentPosition=0 06:19:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:14 Filter is already there-color wheel unchanged 06:19:14 Received message from Master: op=Shutter serial=267783 06:19:14 Shutter LASER close 06:19:14 Received message from Camera: op=State serial=267785 06:19:14 GetSingleValue result=40 Value=cccccccc 06:19:14 SkyScan query 06:19:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:15 Parameters OK 06:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:15 Set A/D data flow result=40 06:19:15 Set A/D channel type result=40 06:19:15 Set A/D encoding result=40 06:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:15 Set channel filter=0.000000e+000 result=40 06:19:15 Config A/D Result=40 06:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:15 Get A/D filter: -9.255963e+061 result=40 06:19:15 Get A/D value=-858993460 result=40 06:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:15 Parameters OK 06:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:15 Set A/D data flow result=40 06:19:15 Set A/D channel type result=40 06:19:15 Set A/D encoding result=40 06:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:15 Set channel filter=0.000000e+000 result=40 06:19:15 Config A/D Result=40 06:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:15 Get A/D filter: -9.255963e+061 result=40 06:19:15 Get A/D value=-858993460 result=40 06:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:15 Aux= 06:19:15 Message to Camera, serial 267785 queued 06:19:52 Received message from Master: op=PointingHead serial=267798 06:19:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:52 Point started: ret=0 06:19:52 point_skyscan result=0 06:19:53 Check angles 06:19:53 SkyScan query 06:19:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.52<-13568 Statuses=0008 0009 06:19:53 Msec=0 True Az=112.995 Ze=-23.52 Az status=0008 Ze status=0009 06:19:53 Check angles 06:19:53 SkyScan query 06:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.49<-14966 Statuses=0008 0009 06:19:54 Msec=750 True Az=112.995 Ze=-44.49 Az status=0008 Ze status=0009 06:19:54 Check angles 06:19:54 SkyScan query 06:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 06:19:55 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 06:19:55 Check angles 06:19:55 SkyScan query 06:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 06:19:55 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 06:19:56 Check angles 06:19:56 SkyScan query 06:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 06:19:56 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 06:19:56 Check angles 06:19:56 SkyScan query 06:19:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 06:19:57 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 06:19:57 Check angles 06:19:57 SkyScan query 06:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 06:19:58 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 06:19:58 Check angles 06:19:58 SkyScan query 06:19:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.205<-23347 Statuses=0008 0009 06:19:58 Msec=5250 True Az=112.995 Ze=-170.205 Az status=0008 Ze status=0009 06:19:59 Check angles 06:19:59 SkyScan query 06:19:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:19:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:19:59 Message to Master queued w/err=0: serial=267798 error=0 06:20:04 Received message from Master: op=Filter serial=267799 06:20:04 Color wheel filter change from 0 to 0 06:20:04 FLIGetFilterPos err=0 currentPosition=0 06:20:04 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:04 Filter is already there-color wheel unchanged 06:20:04 Received message from Master: op=Shutter serial=267800 06:20:04 Shutter LASER open 06:20:05 Received message from Camera: op=State serial=267802 06:20:05 GetSingleValue result=40 Value=cccccccc 06:20:05 SkyScan query 06:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:20:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:05 Parameters OK 06:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:05 Set A/D data flow result=40 06:20:05 Set A/D channel type result=40 06:20:05 Set A/D encoding result=40 06:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:05 Set channel filter=0.000000e+000 result=40 06:20:05 Config A/D Result=40 06:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:05 Get A/D filter: -9.255963e+061 result=40 06:20:05 Get A/D value=-858993460 result=40 06:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:05 Parameters OK 06:20:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:05 Set A/D data flow result=40 06:20:05 Set A/D channel type result=40 06:20:05 Set A/D encoding result=40 06:20:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:05 Set channel filter=0.000000e+000 result=40 06:20:05 Config A/D Result=40 06:20:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:05 Get A/D filter: -9.255963e+061 result=40 06:20:05 Get A/D value=-858993460 result=40 06:20:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:05 Aux= 06:20:05 Message to Camera, serial 267802 queued 06:20:14 Received message from Master: op=Shutter serial=267812 06:20:14 Shutter LASER close 06:20:14 Received message from Master: op=PointingHead serial=267816 06:20:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:20:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:20:15 Point started: ret=0 06:20:15 point_skyscan result=0 06:20:15 Check angles 06:20:15 SkyScan query 06:20:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 06:20:16 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 06:20:16 Check angles 06:20:16 SkyScan query 06:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 06:20:17 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 06:20:17 Check angles 06:20:17 SkyScan query 06:20:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 06:20:17 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 06:20:18 Check angles 06:20:18 SkyScan query 06:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 06:20:18 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 06:20:18 Check angles 06:20:18 SkyScan query 06:20:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 06:20:19 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 06:20:19 Check angles 06:20:19 SkyScan query 06:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 06:20:20 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 06:20:20 Check angles 06:20:20 SkyScan query 06:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.01<-13134 Statuses=0008 0009 06:20:20 Msec=4500 True Az=112.995 Ze=-17.01 Az status=0008 Ze status=0009 06:20:21 Check angles 06:20:21 SkyScan query 06:20:21 SkyScan query done: ret=0 az=112.995<-7533 ze=4.305<-11713 Statuses=0008 0009 06:20:21 Msec=5250 True Az=112.995 Ze=4.305 Az status=0008 Ze status=0009 06:20:21 Check angles 06:20:21 SkyScan query 06:20:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:20:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:20:22 Message to Master queued w/err=0: serial=267816 error=0 06:20:27 Received message from Master: op=Filter serial=267817 06:20:27 Color wheel filter change from 0 to 0 06:20:27 FLIGetFilterPos err=0 currentPosition=0 06:20:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:27 Filter is already there-color wheel unchanged 06:20:27 Received message from Master: op=Shutter serial=267818 06:20:27 Shutter LASER close 06:20:27 Received message from Camera: op=State serial=267820 06:20:27 GetSingleValue result=40 Value=cccccccc 06:20:27 SkyScan query 06:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:20:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:28 Parameters OK 06:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:28 Set A/D data flow result=40 06:20:28 Set A/D channel type result=40 06:20:28 Set A/D encoding result=40 06:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:28 Set channel filter=0.000000e+000 result=40 06:20:28 Config A/D Result=40 06:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:28 Get A/D filter: -9.255963e+061 result=40 06:20:28 Get A/D value=-858993460 result=40 06:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:28 Parameters OK 06:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:28 Set A/D data flow result=40 06:20:28 Set A/D channel type result=40 06:20:28 Set A/D encoding result=40 06:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:28 Set channel filter=0.000000e+000 result=40 06:20:28 Config A/D Result=40 06:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:28 Get A/D filter: -9.255963e+061 result=40 06:20:28 Get A/D value=-858993460 result=40 06:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:28 Aux= 06:20:28 Message to Camera, serial 267820 queued 06:21:05 Received message from Master: op=PointingHead serial=267833 06:21:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:21:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:21:05 Point started: ret=0 06:21:05 point_skyscan result=0 06:21:06 Check angles 06:21:06 SkyScan query 06:21:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:21:06 Message to Master queued w/err=0: serial=267833 error=0 06:21:11 Received message from Master: op=Filter serial=267834 06:21:11 Color wheel filter change from 0 to 0 06:21:11 FLIGetFilterPos err=0 currentPosition=0 06:21:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:11 Filter is already there-color wheel unchanged 06:21:11 Received message from Master: op=Shutter serial=267835 06:21:11 Shutter LASER close 06:21:11 Received message from Camera: op=State serial=267837 06:21:11 GetSingleValue result=40 Value=cccccccc 06:21:11 SkyScan query 06:21:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:21:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:12 Parameters OK 06:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:12 Set A/D data flow result=40 06:21:12 Set A/D channel type result=40 06:21:12 Set A/D encoding result=40 06:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:12 Set channel filter=0.000000e+000 result=40 06:21:12 Config A/D Result=40 06:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:12 Get A/D filter: -9.255963e+061 result=40 06:21:12 Get A/D value=-858993460 result=40 06:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:12 Parameters OK 06:21:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:12 Set A/D data flow result=40 06:21:12 Set A/D channel type result=40 06:21:12 Set A/D encoding result=40 06:21:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:12 Set channel filter=0.000000e+000 result=40 06:21:12 Config A/D Result=40 06:21:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:12 Get A/D filter: -9.255963e+061 result=40 06:21:12 Get A/D value=-858993460 result=40 06:21:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:12 Aux= 06:21:12 Message to Camera, serial 267837 queued 06:21:49 Received message from Master: op=PointingHead serial=267850 06:21:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:21:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:21:49 Point started: ret=0 06:21:49 point_skyscan result=0 06:21:50 Check angles 06:21:50 SkyScan query 06:21:51 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 06:21:51 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 06:21:51 Check angles 06:21:51 SkyScan query 06:21:51 SkyScan query done: ret=0 az=153.945<-10263 ze=-6.495<-12433 Statuses=0009 0008 06:21:51 Msec=750 True Az=153.945 Ze=-6.495 Az status=0009 Ze status=0008 06:21:52 Check angles 06:21:52 SkyScan query 06:21:52 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 06:21:52 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 06:21:52 Check angles 06:21:52 SkyScan query 06:21:53 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:21:53 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:21:53 Message to Master queued w/err=0: serial=267850 error=0 06:21:58 Received message from Master: op=Filter serial=267851 06:21:58 Color wheel filter change from 0 to 0 06:21:58 FLIGetFilterPos err=0 currentPosition=0 06:21:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:58 Filter is already there-color wheel unchanged 06:21:58 Received message from Master: op=Shutter serial=267852 06:21:58 Shutter LASER close 06:21:58 Received message from Camera: op=State serial=267854 06:21:58 GetSingleValue result=40 Value=cccccccc 06:21:58 SkyScan query 06:21:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:21:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:59 Parameters OK 06:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:59 Set A/D data flow result=40 06:21:59 Set A/D channel type result=40 06:21:59 Set A/D encoding result=40 06:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:59 Set channel filter=0.000000e+000 result=40 06:21:59 Config A/D Result=40 06:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:59 Get A/D filter: -9.255963e+061 result=40 06:21:59 Get A/D value=-858993460 result=40 06:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:59 Parameters OK 06:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:59 Set A/D data flow result=40 06:21:59 Set A/D channel type result=40 06:21:59 Set A/D encoding result=40 06:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:59 Set channel filter=0.000000e+000 result=40 06:21:59 Config A/D Result=40 06:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:59 Get A/D filter: -9.255963e+061 result=40 06:21:59 Get A/D value=-858993460 result=40 06:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:59 Aux= 06:21:59 Message to Camera, serial 267854 queued 06:22:35 Received message from Master: op=PointingHead serial=267867 06:22:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:22:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:22:36 Point started: ret=0 06:22:36 point_skyscan result=0 06:22:37 Check angles 06:22:37 SkyScan query 06:22:37 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 06:22:37 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 06:22:37 Check angles 06:22:37 SkyScan query 06:22:38 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 06:22:38 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 06:22:38 Check angles 06:22:38 SkyScan query 06:22:39 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 06:22:39 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 06:22:39 Check angles 06:22:39 SkyScan query 06:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:22:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:22:39 Message to Master queued w/err=0: serial=267867 error=0 06:22:44 Received message from Master: op=Filter serial=267868 06:22:44 Color wheel filter change from 0 to 0 06:22:44 FLIGetFilterPos err=0 currentPosition=0 06:22:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:44 Filter is already there-color wheel unchanged 06:22:45 Received message from Master: op=Shutter serial=267869 06:22:45 Shutter LASER close 06:22:45 Received message from Camera: op=State serial=267871 06:22:45 GetSingleValue result=40 Value=cccccccc 06:22:45 SkyScan query 06:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:22:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:45 Parameters OK 06:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:45 Set A/D data flow result=40 06:22:45 Set A/D channel type result=40 06:22:45 Set A/D encoding result=40 06:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:45 Set channel filter=0.000000e+000 result=40 06:22:45 Config A/D Result=40 06:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:45 Get A/D filter: -9.255963e+061 result=40 06:22:45 Get A/D value=-858993460 result=40 06:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:45 Parameters OK 06:22:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:45 Set A/D data flow result=40 06:22:45 Set A/D channel type result=40 06:22:45 Set A/D encoding result=40 06:22:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:45 Set channel filter=0.000000e+000 result=40 06:22:45 Config A/D Result=40 06:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:45 Get A/D filter: -9.255963e+061 result=40 06:22:45 Get A/D value=-858993460 result=40 06:22:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:45 Aux= 06:22:45 Message to Camera, serial 267871 queued 06:23:22 Received message from Master: op=PointingHead serial=267884 06:23:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:23:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:23:22 Point started: ret=0 06:23:22 point_skyscan result=0 06:23:23 Check angles 06:23:23 SkyScan query 06:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 06:23:24 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 06:23:24 Check angles 06:23:24 SkyScan query 06:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 06:23:25 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 06:23:25 Check angles 06:23:25 SkyScan query 06:23:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.655<-16377 Statuses=0008 0009 06:23:25 Msec=1500 True Az=112.995 Ze=-65.655 Az status=0008 Ze status=0009 06:23:25 Check angles 06:23:25 SkyScan query 06:23:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 06:23:26 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 06:23:26 Check angles 06:23:26 SkyScan query 06:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.595<-19173 Statuses=0008 0009 06:23:27 Msec=3000 True Az=112.995 Ze=-107.595 Az status=0008 Ze status=0009 06:23:27 Check angles 06:23:27 SkyScan query 06:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 06:23:28 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 06:23:28 Check angles 06:23:28 SkyScan query 06:23:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.52<-21968 Statuses=0008 0009 06:23:28 Msec=4500 True Az=112.995 Ze=-149.52 Az status=0008 Ze status=0009 06:23:28 Check angles 06:23:28 SkyScan query 06:23:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 06:23:29 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 06:23:29 Check angles 06:23:29 SkyScan query 06:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:23:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:23:30 Message to Master queued w/err=0: serial=267884 error=0 06:23:35 Received message from Master: op=Filter serial=267885 06:23:35 Color wheel filter change from 0 to 0 06:23:35 FLIGetFilterPos err=0 currentPosition=0 06:23:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:35 Filter is already there-color wheel unchanged 06:23:35 Received message from Master: op=Shutter serial=267886 06:23:35 Shutter LASER open 06:23:35 Received message from Camera: op=State serial=267888 06:23:35 GetSingleValue result=40 Value=cccccccc 06:23:35 SkyScan query 06:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:23:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:36 Parameters OK 06:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:36 Set A/D data flow result=40 06:23:36 Set A/D channel type result=40 06:23:36 Set A/D encoding result=40 06:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:36 Set channel filter=0.000000e+000 result=40 06:23:36 Config A/D Result=40 06:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:36 Get A/D filter: -9.255963e+061 result=40 06:23:36 Get A/D value=-858993460 result=40 06:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:36 Parameters OK 06:23:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:36 Set A/D data flow result=40 06:23:36 Set A/D channel type result=40 06:23:36 Set A/D encoding result=40 06:23:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:36 Set channel filter=0.000000e+000 result=40 06:23:36 Config A/D Result=40 06:23:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:36 Get A/D filter: -9.255963e+061 result=40 06:23:36 Get A/D value=-858993460 result=40 06:23:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:36 Aux= 06:23:36 Message to Camera, serial 267888 queued 06:23:44 Received message from Master: op=Shutter serial=267898 06:23:44 Shutter LASER close 06:23:45 Received message from Master: op=PointingHead serial=267902 06:23:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:23:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:23:45 Point started: ret=0 06:23:45 point_skyscan result=0 06:23:46 Check angles 06:23:46 SkyScan query 06:23:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 06:23:46 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 06:23:46 Check angles 06:23:46 SkyScan query 06:23:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 06:23:47 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 06:23:47 Check angles 06:23:47 SkyScan query 06:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 06:23:48 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 [UTC 2019-3-14 06:23:48] 06:23:48 Check angles 06:23:48 SkyScan query 06:23:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 06:23:48 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 06:23:49 Check angles 06:23:49 SkyScan query 06:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 06:23:49 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 06:23:49 Check angles 06:23:49 SkyScan query 06:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 06:23:50 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 06:23:50 Check angles 06:23:50 SkyScan query 06:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 06:23:51 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 06:23:51 Check angles 06:23:51 SkyScan query 06:23:51 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 06:23:51 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 06:23:52 Check angles 06:23:52 SkyScan query 06:23:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:23:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:23:52 Message to Master queued w/err=0: serial=267902 error=0 06:23:57 Received message from Master: op=Filter serial=267903 06:23:57 Color wheel filter change from 0 to 0 06:23:57 FLIGetFilterPos err=0 currentPosition=0 06:23:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:57 Filter is already there-color wheel unchanged 06:23:57 Received message from Master: op=Shutter serial=267904 06:23:57 Shutter LASER close 06:23:58 Received message from Camera: op=State serial=267906 06:23:58 GetSingleValue result=40 Value=cccccccc 06:23:58 SkyScan query 06:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:23:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:58 Parameters OK 06:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:58 Set A/D data flow result=40 06:23:58 Set A/D channel type result=40 06:23:58 Set A/D encoding result=40 06:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:58 Set channel filter=0.000000e+000 result=40 06:23:58 Config A/D Result=40 06:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:58 Get A/D filter: -9.255963e+061 result=40 06:23:58 Get A/D value=-858993460 result=40 06:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:58 Parameters OK 06:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:58 Set A/D data flow result=40 06:23:58 Set A/D channel type result=40 06:23:58 Set A/D encoding result=40 06:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:58 Set channel filter=0.000000e+000 result=40 06:23:58 Config A/D Result=40 06:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:58 Get A/D filter: -9.255963e+061 result=40 06:23:58 Get A/D value=-858993460 result=40 06:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:58 Aux= 06:23:58 Message to Camera, serial 267906 queued 06:24:35 Received message from Master: op=PointingHead serial=267919 06:24:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:24:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:24:35 Point started: ret=0 06:24:35 point_skyscan result=0 06:24:36 Check angles 06:24:36 SkyScan query 06:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:24:37 Message to Master queued w/err=0: serial=267919 error=0 06:24:42 Received message from Master: op=Filter serial=267920 06:24:42 Color wheel filter change from 0 to 0 06:24:42 FLIGetFilterPos err=0 currentPosition=0 06:24:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:42 Filter is already there-color wheel unchanged 06:24:42 Received message from Master: op=Shutter serial=267921 06:24:42 Shutter LASER close 06:24:42 Received message from Camera: op=State serial=267923 06:24:42 GetSingleValue result=40 Value=cccccccc 06:24:42 SkyScan query 06:24:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:42 Parameters OK 06:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:42 Set A/D data flow result=40 06:24:42 Set A/D channel type result=40 06:24:42 Set A/D encoding result=40 06:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:42 Set channel filter=0.000000e+000 result=40 06:24:42 Config A/D Result=40 06:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:42 Get A/D filter: -9.255963e+061 result=40 06:24:42 Get A/D value=-858993460 result=40 06:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:42 Parameters OK 06:24:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:42 Set A/D data flow result=40 06:24:42 Set A/D channel type result=40 06:24:42 Set A/D encoding result=40 06:24:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:42 Set channel filter=0.000000e+000 result=40 06:24:42 Config A/D Result=40 06:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:42 Get A/D filter: -9.255963e+061 result=40 06:24:42 Get A/D value=-858993460 result=40 06:24:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:42 Aux= 06:24:42 Message to Camera, serial 267923 queued 06:25:19 Received message from Master: op=PointingHead serial=267936 06:25:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:25:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:25:20 Point started: ret=0 06:25:20 point_skyscan result=0 06:25:20 Check angles 06:25:20 SkyScan query 06:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:25:21 Message to Master queued w/err=0: serial=267936 error=0 06:25:26 Received message from Master: op=Filter serial=267937 06:25:26 Color wheel filter change from 0 to 0 06:25:26 FLIGetFilterPos err=0 currentPosition=0 06:25:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:26 Filter is already there-color wheel unchanged 06:25:26 Received message from Master: op=Shutter serial=267938 06:25:26 Shutter LASER close 06:25:26 Received message from Camera: op=State serial=267940 06:25:26 GetSingleValue result=40 Value=cccccccc 06:25:26 SkyScan query 06:25:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:25:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:27 Parameters OK 06:25:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:27 Set A/D data flow result=40 06:25:27 Set A/D channel type result=40 06:25:27 Set A/D encoding result=40 06:25:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:27 Set channel filter=0.000000e+000 result=40 06:25:27 Config A/D Result=40 06:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:27 Get A/D filter: -9.255963e+061 result=40 06:25:27 Get A/D value=-858993460 result=40 06:25:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:27 Parameters OK 06:25:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:27 Set A/D data flow result=40 06:25:27 Set A/D channel type result=40 06:25:27 Set A/D encoding result=40 06:25:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:27 Set channel filter=0.000000e+000 result=40 06:25:27 Config A/D Result=40 06:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:27 Get A/D filter: -9.255963e+061 result=40 06:25:27 Get A/D value=-858993460 result=40 06:25:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:27 Aux= 06:25:27 Message to Camera, serial 267940 queued 06:26:04 Received message from Master: op=PointingHead serial=267953 06:26:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:26:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:26:04 Point started: ret=0 06:26:04 point_skyscan result=0 06:26:05 Check angles 06:26:05 SkyScan query 06:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:26:05 Message to Master queued w/err=0: serial=267953 error=0 06:26:10 Received message from Master: op=Filter serial=267954 06:26:10 Color wheel filter change from 0 to 0 06:26:10 FLIGetFilterPos err=0 currentPosition=0 06:26:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:10 Filter is already there-color wheel unchanged 06:26:10 Received message from Master: op=Shutter serial=267955 06:26:10 Shutter LASER close 06:26:11 Received message from Camera: op=State serial=267957 06:26:11 GetSingleValue result=40 Value=cccccccc 06:26:11 SkyScan query 06:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:26:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:11 Parameters OK 06:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:11 Set A/D data flow result=40 06:26:11 Set A/D channel type result=40 06:26:11 Set A/D encoding result=40 06:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:11 Set channel filter=0.000000e+000 result=40 06:26:11 Config A/D Result=40 06:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:11 Get A/D filter: -9.255963e+061 result=40 06:26:11 Get A/D value=-858993460 result=40 06:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:11 Parameters OK 06:26:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:11 Set A/D data flow result=40 06:26:11 Set A/D channel type result=40 06:26:11 Set A/D encoding result=40 06:26:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:11 Set channel filter=0.000000e+000 result=40 06:26:11 Config A/D Result=40 06:26:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:11 Get A/D filter: -9.255963e+061 result=40 06:26:11 Get A/D value=-858993460 result=40 06:26:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:11 Aux= 06:26:11 Message to Camera, serial 267957 queued 06:26:48 Received message from Master: op=PointingHead serial=267970 06:26:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:26:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:26:48 Point started: ret=0 06:26:48 point_skyscan result=0 06:26:49 Check angles 06:26:49 SkyScan query 06:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 06:26:50 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 06:26:50 Check angles 06:26:50 SkyScan query 06:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 06:26:50 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 06:26:51 Check angles 06:26:51 SkyScan query 06:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.58<-16372 Statuses=0008 0009 06:26:51 Msec=1500 True Az=112.995 Ze=-65.58 Az status=0008 Ze status=0009 06:26:51 Check angles 06:26:51 SkyScan query 06:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 06:26:52 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 06:26:52 Check angles 06:26:52 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 06:26:53 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 06:26:53 Check angles 06:26:53 SkyScan query 06:26:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 06:26:53 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 06:26:54 Check angles 06:26:54 SkyScan query 06:26:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 06:26:54 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 06:26:54 Check angles 06:26:54 SkyScan query 06:26:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 06:26:55 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 06:26:55 Check angles 06:26:55 SkyScan query 06:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:26:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:26:56 Message to Master queued w/err=0: serial=267970 error=0 06:27:01 Received message from Master: op=Filter serial=267971 06:27:01 Color wheel filter change from 0 to 0 06:27:01 FLIGetFilterPos err=0 currentPosition=0 06:27:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:01 Filter is already there-color wheel unchanged 06:27:01 Received message from Master: op=Shutter serial=267972 06:27:01 Shutter LASER open 06:27:01 Received message from Camera: op=State serial=267974 06:27:01 GetSingleValue result=40 Value=cccccccc 06:27:01 SkyScan query 06:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:27:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:02 Parameters OK 06:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:02 Set A/D data flow result=40 06:27:02 Set A/D channel type result=40 06:27:02 Set A/D encoding result=40 06:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:02 Set channel filter=0.000000e+000 result=40 06:27:02 Config A/D Result=40 06:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:02 Get A/D filter: -9.255963e+061 result=40 06:27:02 Get A/D value=-858993460 result=40 06:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:02 Parameters OK 06:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:02 Set A/D data flow result=40 06:27:02 Set A/D channel type result=40 06:27:02 Set A/D encoding result=40 06:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:02 Set channel filter=0.000000e+000 result=40 06:27:02 Config A/D Result=40 06:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:02 Get A/D filter: -9.255963e+061 result=40 06:27:02 Get A/D value=-858993460 result=40 06:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:02 Aux= 06:27:02 Message to Camera, serial 267974 queued 06:27:10 Received message from Master: op=Shutter serial=267984 06:27:10 Shutter LASER close 06:27:11 Received message from Master: op=PointingHead serial=267988 06:27:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:27:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:27:11 Point started: ret=0 06:27:11 point_skyscan result=0 06:27:12 Check angles 06:27:12 SkyScan query 06:27:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.725<-21515 Statuses=0008 0009 06:27:12 Msec=0 True Az=112.995 Ze=-142.725 Az status=0008 Ze status=0009 06:27:12 Check angles 06:27:12 SkyScan query 06:27:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 06:27:13 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 06:27:13 Check angles 06:27:13 SkyScan query 06:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 06:27:14 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 06:27:14 Check angles 06:27:14 SkyScan query 06:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 06:27:14 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 06:27:15 Check angles 06:27:15 SkyScan query 06:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 06:27:15 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 06:27:15 Check angles 06:27:15 SkyScan query 06:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 06:27:16 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 06:27:16 Check angles 06:27:16 SkyScan query 06:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 06:27:17 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 06:27:17 Check angles 06:27:17 SkyScan query 06:27:17 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 06:27:17 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 06:27:18 Check angles 06:27:18 SkyScan query 06:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:27:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:27:18 Message to Master queued w/err=0: serial=267988 error=0 06:27:23 Received message from Master: op=Filter serial=267989 06:27:23 Color wheel filter change from 0 to 0 06:27:23 FLIGetFilterPos err=0 currentPosition=0 06:27:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:23 Filter is already there-color wheel unchanged 06:27:23 Received message from Master: op=Shutter serial=267990 06:27:24 Shutter LASER close 06:27:24 Received message from Camera: op=State serial=267992 06:27:24 GetSingleValue result=40 Value=cccccccc 06:27:24 SkyScan query 06:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:27:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:24 Parameters OK 06:27:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:24 Set A/D data flow result=40 06:27:24 Set A/D channel type result=40 06:27:24 Set A/D encoding result=40 06:27:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:24 Set channel filter=0.000000e+000 result=40 06:27:24 Config A/D Result=40 06:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:24 Get A/D filter: -9.255963e+061 result=40 06:27:24 Get A/D value=-858993460 result=40 06:27:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:24 Parameters OK 06:27:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:24 Set A/D data flow result=40 06:27:24 Set A/D channel type result=40 06:27:24 Set A/D encoding result=40 06:27:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:24 Set channel filter=0.000000e+000 result=40 06:27:24 Config A/D Result=40 06:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:24 Get A/D filter: -9.255963e+061 result=40 06:27:24 Get A/D value=-858993460 result=40 06:27:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:24 Aux= 06:27:24 Message to Camera, serial 267992 queued 06:28:01 Received message from Master: op=PointingHead serial=268005 06:28:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:28:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:28:01 Point started: ret=0 06:28:01 point_skyscan result=0 06:28:02 Check angles 06:28:02 SkyScan query 06:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:28:03 Message to Master queued w/err=0: serial=268005 error=0 06:28:08 Received message from Master: op=Filter serial=268006 06:28:08 Color wheel filter change from 0 to 0 06:28:08 FLIGetFilterPos err=0 currentPosition=0 06:28:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:08 Filter is already there-color wheel unchanged 06:28:08 Received message from Master: op=Shutter serial=268007 06:28:08 Shutter LASER close 06:28:08 Received message from Camera: op=State serial=268009 06:28:08 GetSingleValue result=40 Value=cccccccc 06:28:08 SkyScan query 06:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:28:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:09 Parameters OK 06:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:09 Set A/D data flow result=40 06:28:09 Set A/D channel type result=40 06:28:09 Set A/D encoding result=40 06:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:09 Set channel filter=0.000000e+000 result=40 06:28:09 Config A/D Result=40 06:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:09 Get A/D filter: -9.255963e+061 result=40 06:28:09 Get A/D value=-858993460 result=40 06:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:09 Parameters OK 06:28:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:09 Set A/D data flow result=40 06:28:09 Set A/D channel type result=40 06:28:09 Set A/D encoding result=40 06:28:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:09 Set channel filter=0.000000e+000 result=40 06:28:09 Config A/D Result=40 06:28:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:09 Get A/D filter: -9.255963e+061 result=40 06:28:09 Get A/D value=-858993460 result=40 06:28:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:09 Aux= 06:28:09 Message to Camera, serial 268009 queued 06:28:45 Received message from Master: op=PointingHead serial=268022 06:28:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:28:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:28:46 Point started: ret=0 06:28:46 point_skyscan result=0 06:28:46 Check angles 06:28:46 SkyScan query 06:28:47 SkyScan query done: ret=0 az=135.93<-9062 ze=-6.51<-12434 Statuses=0009 0008 06:28:47 Msec=0 True Az=135.93 Ze=-6.51 Az status=0009 Ze status=0008 06:28:47 Check angles 06:28:47 SkyScan query 06:28:48 SkyScan query done: ret=0 az=153.345<-10223 ze=-6.495<-12433 Statuses=0009 0008 06:28:48 Msec=750 True Az=153.345 Ze=-6.495 Az status=0009 Ze status=0008 06:28:48 Check angles 06:28:48 SkyScan query 06:28:49 SkyScan query done: ret=0 az=170.805<-11387 ze=-6.495<-12433 Statuses=0009 0008 06:28:49 Msec=1500 True Az=170.805 Ze=-6.495 Az status=0009 Ze status=0008 06:28:49 Check angles 06:28:49 SkyScan query 06:28:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 06:28:49 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 06:28:49 Message to Master queued w/err=0: serial=268022 error=0 06:28:54 Received message from Master: op=Filter serial=268023 06:28:54 Color wheel filter change from 0 to 0 06:28:54 FLIGetFilterPos err=0 currentPosition=0 06:28:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:54 Filter is already there-color wheel unchanged 06:28:54 Received message from Master: op=Shutter serial=268024 06:28:54 Shutter LASER close 06:28:55 Received message from Camera: op=State serial=268026 06:28:55 GetSingleValue result=40 Value=cccccccc 06:28:55 SkyScan query 06:28:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:28:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:55 Parameters OK 06:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:55 Set A/D data flow result=40 06:28:55 Set A/D channel type result=40 06:28:55 Set A/D encoding result=40 06:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:55 Set channel filter=0.000000e+000 result=40 06:28:55 Config A/D Result=40 06:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:55 Get A/D filter: -9.255963e+061 result=40 06:28:55 Get A/D value=-858993460 result=40 06:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:55 Parameters OK 06:28:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:55 Set A/D data flow result=40 06:28:55 Set A/D channel type result=40 06:28:55 Set A/D encoding result=40 06:28:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:55 Set channel filter=0.000000e+000 result=40 06:28:55 Config A/D Result=40 06:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:55 Get A/D filter: -9.255963e+061 result=40 06:28:55 Get A/D value=-858993460 result=40 06:28:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:55 Aux= 06:28:55 Message to Camera, serial 268026 queued 06:29:31 Received message from Master: op=PointingHead serial=268038 06:29:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:29:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:29:31 Point started: ret=0 06:29:31 point_skyscan result=0 06:29:32 Check angles 06:29:32 SkyScan query 06:29:33 SkyScan query done: ret=0 az=152.475<-10165 ze=6.51<-11566 Statuses=0009 0008 06:29:33 Msec=0 True Az=152.475 Ze=6.51 Az status=0009 Ze status=0008 06:29:33 Check angles 06:29:33 SkyScan query 06:29:33 SkyScan query done: ret=0 az=135.015<-9001 ze=6.495<-11567 Statuses=0009 0008 06:29:33 Msec=750 True Az=135.015 Ze=6.495 Az status=0009 Ze status=0008 06:29:34 Check angles 06:29:34 SkyScan query 06:29:34 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 06:29:34 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 06:29:34 Check angles 06:29:34 SkyScan query 06:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:29:35 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:29:35 Message to Master queued w/err=0: serial=268038 error=0 06:29:40 Received message from Master: op=Filter serial=268039 06:29:40 Color wheel filter change from 0 to 0 06:29:40 FLIGetFilterPos err=0 currentPosition=0 06:29:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:40 Filter is already there-color wheel unchanged 06:29:40 Received message from Master: op=Shutter serial=268040 06:29:40 Shutter LASER close 06:29:40 Received message from Camera: op=State serial=268042 06:29:40 GetSingleValue result=40 Value=cccccccc 06:29:40 SkyScan query 06:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:29:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:41 Parameters OK 06:29:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:41 Set A/D data flow result=40 06:29:41 Set A/D channel type result=40 06:29:41 Set A/D encoding result=40 06:29:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:41 Set channel filter=0.000000e+000 result=40 06:29:41 Config A/D Result=40 06:29:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:41 Get A/D filter: -9.255963e+061 result=40 06:29:41 Get A/D value=-858993460 result=40 06:29:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:41 Parameters OK 06:29:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:41 Set A/D data flow result=40 06:29:41 Set A/D channel type result=40 06:29:41 Set A/D encoding result=40 06:29:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:41 Set channel filter=0.000000e+000 result=40 06:29:41 Config A/D Result=40 06:29:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:41 Get A/D filter: -9.255963e+061 result=40 06:29:41 Get A/D value=-858993460 result=40 06:29:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:41 Aux= 06:29:41 Message to Camera, serial 268042 queued 06:30:18 Received message from Master: op=PointingHead serial=268055 06:30:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:30:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:30:18 Point started: ret=0 06:30:18 point_skyscan result=0 06:30:19 Check angles 06:30:19 SkyScan query 06:30:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 06:30:19 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 06:30:19 Check angles 06:30:19 SkyScan query 06:30:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 06:30:20 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 06:30:20 Check angles 06:30:20 SkyScan query 06:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 06:30:21 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 06:30:21 Check angles 06:30:21 SkyScan query 06:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 06:30:21 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 06:30:22 Check angles 06:30:22 SkyScan query 06:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 06:30:22 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 06:30:22 Check angles 06:30:22 SkyScan query 06:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 06:30:23 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 06:30:23 Check angles 06:30:23 SkyScan query 06:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.58<-21972 Statuses=0008 0009 06:30:24 Msec=4500 True Az=112.995 Ze=-149.58 Az status=0008 Ze status=0009 06:30:24 Check angles 06:30:24 SkyScan query 06:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.505<-23367 Statuses=0008 0009 06:30:24 Msec=5250 True Az=112.995 Ze=-170.505 Az status=0008 Ze status=0009 06:30:25 Check angles 06:30:25 SkyScan query 06:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:30:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:30:25 Message to Master queued w/err=0: serial=268055 error=0 06:30:30 Received message from Master: op=Filter serial=268056 06:30:30 Color wheel filter change from 0 to 0 06:30:30 FLIGetFilterPos err=0 currentPosition=0 06:30:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:30 Filter is already there-color wheel unchanged 06:30:30 Received message from Master: op=Shutter serial=268057 06:30:30 Shutter LASER open 06:30:31 Received message from Camera: op=State serial=268059 06:30:31 GetSingleValue result=40 Value=cccccccc 06:30:31 SkyScan query 06:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:30:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:31 Parameters OK 06:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:31 Set A/D data flow result=40 06:30:31 Set A/D channel type result=40 06:30:31 Set A/D encoding result=40 06:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:31 Set channel filter=0.000000e+000 result=40 06:30:31 Config A/D Result=40 06:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:31 Get A/D filter: -9.255963e+061 result=40 06:30:31 Get A/D value=-858993460 result=40 06:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:31 Parameters OK 06:30:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:31 Set A/D data flow result=40 06:30:31 Set A/D channel type result=40 06:30:31 Set A/D encoding result=40 06:30:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:31 Set channel filter=0.000000e+000 result=40 06:30:31 Config A/D Result=40 06:30:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:31 Get A/D filter: -9.255963e+061 result=40 06:30:31 Get A/D value=-858993460 result=40 06:30:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:31 Aux= 06:30:31 Message to Camera, serial 268059 queued 06:30:40 Received message from Master: op=Shutter serial=268069 06:30:40 Shutter LASER close 06:30:40 Received message from Master: op=PointingHead serial=268073 06:30:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:30:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:30:40 Point started: ret=0 06:30:40 point_skyscan result=0 06:30:41 Check angles 06:30:41 SkyScan query 06:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 06:30:42 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 06:30:42 Check angles 06:30:42 SkyScan query 06:30:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 06:30:42 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 06:30:43 Check angles 06:30:43 SkyScan query 06:30:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 06:30:43 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 06:30:43 Check angles 06:30:43 SkyScan query 06:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 06:30:44 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 06:30:44 Check angles 06:30:44 SkyScan query 06:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 06:30:45 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 06:30:45 Check angles 06:30:45 SkyScan query 06:30:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 06:30:45 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 06:30:46 Check angles 06:30:46 SkyScan query 06:30:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.085<-13139 Statuses=0008 0009 06:30:46 Msec=4500 True Az=112.995 Ze=-17.085 Az status=0008 Ze status=0009 06:30:46 Check angles 06:30:46 SkyScan query 06:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 06:30:47 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 06:30:47 Check angles 06:30:47 SkyScan query 06:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:30:48 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:30:48 Message to Master queued w/err=0: serial=268073 error=0 06:30:53 Received message from Master: op=Filter serial=268074 06:30:53 Color wheel filter change from 0 to 0 06:30:53 FLIGetFilterPos err=0 currentPosition=0 06:30:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:53 Filter is already there-color wheel unchanged 06:30:53 Received message from Master: op=Shutter serial=268075 06:30:53 Shutter LASER close 06:30:53 Received message from Camera: op=State serial=268077 06:30:53 GetSingleValue result=40 Value=cccccccc 06:30:53 SkyScan query 06:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:30:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:54 Parameters OK 06:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:54 Set A/D data flow result=40 06:30:54 Set A/D channel type result=40 06:30:54 Set A/D encoding result=40 06:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:54 Set channel filter=0.000000e+000 result=40 06:30:54 Config A/D Result=40 06:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:54 Get A/D filter: -9.255963e+061 result=40 06:30:54 Get A/D value=-858993460 result=40 06:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:54 Parameters OK 06:30:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:54 Set A/D data flow result=40 06:30:54 Set A/D channel type result=40 06:30:54 Set A/D encoding result=40 06:30:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:54 Set channel filter=0.000000e+000 result=40 06:30:54 Config A/D Result=40 06:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:54 Get A/D filter: -9.255963e+061 result=40 06:30:54 Get A/D value=-858993460 result=40 06:30:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:54 Aux= 06:30:54 Message to Camera, serial 268077 queued 06:31:30 Received message from Master: op=PointingHead serial=268090 06:31:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:31:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:31:31 Point started: ret=0 06:31:31 point_skyscan result=0 06:31:32 Check angles 06:31:32 SkyScan query 06:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:31:32 Message to Master queued w/err=0: serial=268090 error=0 06:31:37 Received message from Master: op=Filter serial=268091 06:31:37 Color wheel filter change from 0 to 0 06:31:37 FLIGetFilterPos err=0 currentPosition=0 06:31:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:37 Filter is already there-color wheel unchanged 06:31:37 Received message from Master: op=Shutter serial=268092 06:31:37 Shutter LASER close 06:31:37 Received message from Camera: op=State serial=268094 06:31:37 GetSingleValue result=40 Value=cccccccc 06:31:37 SkyScan query 06:31:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:38 Parameters OK 06:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:38 Set A/D data flow result=40 06:31:38 Set A/D channel type result=40 06:31:38 Set A/D encoding result=40 06:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:38 Set channel filter=0.000000e+000 result=40 06:31:38 Config A/D Result=40 06:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:38 Get A/D filter: -9.255963e+061 result=40 06:31:38 Get A/D value=-858993460 result=40 06:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:38 Parameters OK 06:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:38 Set A/D data flow result=40 06:31:38 Set A/D channel type result=40 06:31:38 Set A/D encoding result=40 06:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:38 Set channel filter=0.000000e+000 result=40 06:31:38 Config A/D Result=40 06:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:38 Get A/D filter: -9.255963e+061 result=40 06:31:38 Get A/D value=-858993460 result=40 06:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:38 Aux= 06:31:38 Message to Camera, serial 268094 queued 06:32:15 Received message from Master: op=PointingHead serial=268107 06:32:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:32:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:32:15 Point started: ret=0 06:32:15 point_skyscan result=0 06:32:16 Check angles 06:32:16 SkyScan query 06:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:32:16 Message to Master queued w/err=0: serial=268107 error=0 06:32:21 Received message from Master: op=Filter serial=268108 06:32:21 Color wheel filter change from 0 to 0 06:32:21 FLIGetFilterPos err=0 currentPosition=0 06:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:21 Filter is already there-color wheel unchanged 06:32:22 Received message from Master: op=Shutter serial=268109 06:32:22 Shutter LASER close 06:32:22 Received message from Camera: op=State serial=268111 06:32:22 GetSingleValue result=40 Value=cccccccc 06:32:22 SkyScan query 06:32:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:32:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:22 Parameters OK 06:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:22 Set A/D data flow result=40 06:32:22 Set A/D channel type result=40 06:32:22 Set A/D encoding result=40 06:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:22 Set channel filter=0.000000e+000 result=40 06:32:22 Config A/D Result=40 06:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:22 Get A/D filter: -9.255963e+061 result=40 06:32:22 Get A/D value=-858993460 result=40 06:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:22 Parameters OK 06:32:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:22 Set A/D data flow result=40 06:32:22 Set A/D channel type result=40 06:32:22 Set A/D encoding result=40 06:32:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:22 Set channel filter=0.000000e+000 result=40 06:32:22 Config A/D Result=40 06:32:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:22 Get A/D filter: -9.255963e+061 result=40 06:32:22 Get A/D value=-858993460 result=40 06:32:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:22 Aux= 06:32:22 Message to Camera, serial 268111 queued 06:32:59 Received message from Master: op=PointingHead serial=268124 06:32:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:32:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:33:00 Point started: ret=0 06:33:00 point_skyscan result=0 06:33:00 Check angles 06:33:00 SkyScan query 06:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:33:01 Message to Master queued w/err=0: serial=268124 error=0 06:33:06 Received message from Master: op=Filter serial=268125 06:33:06 Color wheel filter change from 0 to 0 06:33:06 FLIGetFilterPos err=0 currentPosition=0 06:33:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:06 Filter is already there-color wheel unchanged 06:33:06 Received message from Master: op=Shutter serial=268126 06:33:06 Shutter LASER close 06:33:06 Received message from Camera: op=State serial=268128 06:33:06 GetSingleValue result=40 Value=cccccccc 06:33:06 SkyScan query 06:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:33:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:07 Parameters OK 06:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:07 Set A/D data flow result=40 06:33:07 Set A/D channel type result=40 06:33:07 Set A/D encoding result=40 06:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:07 Set channel filter=0.000000e+000 result=40 06:33:07 Config A/D Result=40 06:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:07 Get A/D filter: -9.255963e+061 result=40 06:33:07 Get A/D value=-858993460 result=40 06:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:07 Parameters OK 06:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:07 Set A/D data flow result=40 06:33:07 Set A/D channel type result=40 06:33:07 Set A/D encoding result=40 06:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:07 Set channel filter=0.000000e+000 result=40 06:33:07 Config A/D Result=40 06:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:07 Get A/D filter: -9.255963e+061 result=40 06:33:07 Get A/D value=-858993460 result=40 06:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:07 Aux= 06:33:07 Message to Camera, serial 268128 queued 06:33:35 Received message from Master: op=Identify serial=268130 06:33:43 Received message from Master: op=PointingHead serial=268144 06:33:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:33:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:33:44 Point started: ret=0 06:33:44 point_skyscan result=0 06:33:45 Check angles 06:33:45 SkyScan query 06:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 06:33:45 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 06:33:45 Check angles 06:33:45 SkyScan query 06:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 06:33:46 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 06:33:46 Check angles 06:33:46 SkyScan query 06:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 06:33:47 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 06:33:47 Check angles 06:33:47 SkyScan query 06:33:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 06:33:47 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 06:33:48 Check angles 06:33:48 SkyScan query 06:33:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 06:33:48 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 06:33:48 Check angles 06:33:48 SkyScan query 06:33:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 06:33:49 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 06:33:49 Check angles 06:33:49 SkyScan query 06:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 06:33:50 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 06:33:50 Check angles 06:33:50 SkyScan query 06:33:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 06:33:50 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 06:33:51 Check angles 06:33:51 SkyScan query 06:33:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:33:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:33:51 Message to Master queued w/err=0: serial=268144 error=0 06:33:56 Received message from Master: op=Filter serial=268145 06:33:56 Color wheel filter change from 0 to 0 06:33:56 FLIGetFilterPos err=0 currentPosition=0 06:33:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:56 Filter is already there-color wheel unchanged 06:33:56 Received message from Master: op=Shutter serial=268146 06:33:56 Shutter LASER open 06:33:57 Received message from Camera: op=State serial=268148 06:33:57 GetSingleValue result=40 Value=cccccccc 06:33:57 SkyScan query 06:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:33:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:57 Parameters OK 06:33:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:57 Set A/D data flow result=40 06:33:57 Set A/D channel type result=40 06:33:57 Set A/D encoding result=40 06:33:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:57 Set channel filter=0.000000e+000 result=40 06:33:57 Config A/D Result=40 06:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:57 Get A/D filter: -9.255963e+061 result=40 06:33:57 Get A/D value=-858993460 result=40 06:33:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:57 Parameters OK 06:33:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:57 Set A/D data flow result=40 06:33:57 Set A/D channel type result=40 06:33:57 Set A/D encoding result=40 06:33:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:57 Set channel filter=0.000000e+000 result=40 06:33:57 Config A/D Result=40 06:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:57 Get A/D filter: -9.255963e+061 result=40 06:33:57 Get A/D value=-858993460 result=40 06:33:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:57 Aux= 06:33:57 Message to Camera, serial 268148 queued 06:34:06 Received message from Master: op=Shutter serial=268158 06:34:06 Shutter LASER close 06:34:06 Received message from Master: op=PointingHead serial=268162 06:34:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:06 Point started: ret=0 06:34:06 point_skyscan result=0 06:34:07 Check angles 06:34:07 SkyScan query 06:34:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 06:34:08 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 06:34:08 Check angles 06:34:08 SkyScan query 06:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 06:34:09 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 06:34:09 Check angles 06:34:09 SkyScan query 06:34:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 06:34:09 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 06:34:09 Check angles 06:34:09 SkyScan query 06:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 06:34:10 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 06:34:10 Check angles 06:34:10 SkyScan query 06:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.325<-15955 Statuses=0008 0009 06:34:11 Msec=3000 True Az=112.995 Ze=-59.325 Az status=0008 Ze status=0009 06:34:11 Check angles 06:34:11 SkyScan query 06:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 [UTC 2019-3-14 06:34:12] 06:34:12 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 06:34:12 Check angles 06:34:12 SkyScan query 06:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 06:34:12 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 06:34:13 Check angles 06:34:13 SkyScan query 06:34:13 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 06:34:13 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 06:34:13 Check angles 06:34:13 SkyScan query 06:34:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:34:14 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:34:14 Message to Master queued w/err=0: serial=268162 error=0 06:34:19 Received message from Master: op=Filter serial=268163 06:34:19 Color wheel filter change from 0 to 0 06:34:19 FLIGetFilterPos err=0 currentPosition=0 06:34:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:19 Filter is already there-color wheel unchanged 06:34:19 Received message from Master: op=Shutter serial=268164 06:34:19 Shutter LASER close 06:34:19 Received message from Camera: op=State serial=268166 06:34:19 GetSingleValue result=40 Value=cccccccc 06:34:19 SkyScan query 06:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:34:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:20 Parameters OK 06:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:20 Set A/D data flow result=40 06:34:20 Set A/D channel type result=40 06:34:20 Set A/D encoding result=40 06:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:20 Set channel filter=0.000000e+000 result=40 06:34:20 Config A/D Result=40 06:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:20 Get A/D filter: -9.255963e+061 result=40 06:34:20 Get A/D value=-858993460 result=40 06:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:20 Parameters OK 06:34:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:20 Set A/D data flow result=40 06:34:20 Set A/D channel type result=40 06:34:20 Set A/D encoding result=40 06:34:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:20 Set channel filter=0.000000e+000 result=40 06:34:20 Config A/D Result=40 06:34:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:20 Get A/D filter: -9.255963e+061 result=40 06:34:20 Get A/D value=-858993460 result=40 06:34:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:20 Aux= 06:34:20 Message to Camera, serial 268166 queued 06:34:57 Received message from Master: op=PointingHead serial=268179 06:34:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:34:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:34:57 Point started: ret=0 06:34:57 point_skyscan result=0 06:34:58 Check angles 06:34:58 SkyScan query 06:34:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:34:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:34:58 Message to Master queued w/err=0: serial=268179 error=0 06:35:03 Received message from Master: op=Filter serial=268180 06:35:03 Color wheel filter change from 0 to 0 06:35:03 FLIGetFilterPos err=0 currentPosition=0 06:35:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:03 Filter is already there-color wheel unchanged 06:35:03 Received message from Master: op=Shutter serial=268181 06:35:03 Shutter LASER close 06:35:03 Received message from Camera: op=State serial=268183 06:35:03 GetSingleValue result=40 Value=cccccccc 06:35:03 SkyScan query 06:35:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:35:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:04 Parameters OK 06:35:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:04 Set A/D data flow result=40 06:35:04 Set A/D channel type result=40 06:35:04 Set A/D encoding result=40 06:35:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:04 Set channel filter=0.000000e+000 result=40 06:35:04 Config A/D Result=40 06:35:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:04 Get A/D filter: -9.255963e+061 result=40 06:35:04 Get A/D value=-858993460 result=40 06:35:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:04 Parameters OK 06:35:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:04 Set A/D data flow result=40 06:35:04 Set A/D channel type result=40 06:35:04 Set A/D encoding result=40 06:35:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:04 Set channel filter=0.000000e+000 result=40 06:35:04 Config A/D Result=40 06:35:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:04 Get A/D filter: -9.255963e+061 result=40 06:35:04 Get A/D value=-858993460 result=40 06:35:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:04 Aux= 06:35:04 Message to Camera, serial 268183 queued 06:35:41 Received message from Master: op=PointingHead serial=268196 06:35:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:35:41 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:35:41 Point started: ret=0 06:35:41 point_skyscan result=0 06:35:42 Check angles 06:35:42 SkyScan query 06:35:43 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 06:35:43 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 06:35:43 Check angles 06:35:43 SkyScan query 06:35:43 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 06:35:43 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 06:35:43 Check angles 06:35:43 SkyScan query 06:35:44 SkyScan query done: ret=0 az=170.865<-11391 ze=-6.495<-12433 Statuses=0009 0008 06:35:44 Msec=1500 True Az=170.865 Ze=-6.495 Az status=0009 Ze status=0008 06:35:44 Check angles 06:35:44 SkyScan query 06:35:45 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 06:35:45 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 06:35:45 Message to Master queued w/err=0: serial=268196 error=0 06:35:50 Received message from Master: op=Filter serial=268197 06:35:50 Color wheel filter change from 0 to 0 06:35:50 FLIGetFilterPos err=0 currentPosition=0 06:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:50 Filter is already there-color wheel unchanged 06:35:50 Received message from Master: op=Shutter serial=268198 06:35:50 Shutter LASER close 06:35:50 Received message from Camera: op=State serial=268200 06:35:50 GetSingleValue result=40 Value=cccccccc 06:35:50 SkyScan query 06:35:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:51 Parameters OK 06:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:51 Set A/D data flow result=40 06:35:51 Set A/D channel type result=40 06:35:51 Set A/D encoding result=40 06:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:51 Set channel filter=0.000000e+000 result=40 06:35:51 Config A/D Result=40 06:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:51 Get A/D filter: -9.255963e+061 result=40 06:35:51 Get A/D value=-858993460 result=40 06:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:51 Parameters OK 06:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:51 Set A/D data flow result=40 06:35:51 Set A/D channel type result=40 06:35:51 Set A/D encoding result=40 06:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:51 Set channel filter=0.000000e+000 result=40 06:35:51 Config A/D Result=40 06:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:51 Get A/D filter: -9.255963e+061 result=40 06:35:51 Get A/D value=-858993460 result=40 06:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:51 Aux= 06:35:51 Message to Camera, serial 268200 queued 06:36:27 Received message from Master: op=PointingHead serial=268213 06:36:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:36:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:36:28 Point started: ret=0 06:36:28 point_skyscan result=0 06:36:29 Check angles 06:36:29 SkyScan query 06:36:29 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 06:36:29 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 06:36:29 Check angles 06:36:29 SkyScan query 06:36:30 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 06:36:30 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 06:36:30 Check angles 06:36:30 SkyScan query 06:36:31 SkyScan query done: ret=0 az=117.915<-7861 ze=6.495<-11567 Statuses=0009 0008 06:36:31 Msec=1500 True Az=117.915 Ze=6.495 Az status=0009 Ze status=0008 06:36:31 Check angles 06:36:31 SkyScan query 06:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:31 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:36:31 Message to Master queued w/err=0: serial=268213 error=0 06:36:36 Received message from Master: op=Filter serial=268214 06:36:36 Color wheel filter change from 0 to 0 06:36:36 FLIGetFilterPos err=0 currentPosition=0 06:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:36 Filter is already there-color wheel unchanged 06:36:37 Received message from Master: op=Shutter serial=268215 06:36:37 Shutter LASER close 06:36:37 Received message from Camera: op=State serial=268217 06:36:37 GetSingleValue result=40 Value=cccccccc 06:36:37 SkyScan query 06:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:37 Parameters OK 06:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:37 Set A/D data flow result=40 06:36:37 Set A/D channel type result=40 06:36:37 Set A/D encoding result=40 06:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:37 Set channel filter=0.000000e+000 result=40 06:36:37 Config A/D Result=40 06:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:37 Get A/D filter: -9.255963e+061 result=40 06:36:37 Get A/D value=-858993460 result=40 06:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:37 Parameters OK 06:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:37 Set A/D data flow result=40 06:36:37 Set A/D channel type result=40 06:36:37 Set A/D encoding result=40 06:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:37 Set channel filter=0.000000e+000 result=40 06:36:37 Config A/D Result=40 06:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:37 Get A/D filter: -9.255963e+061 result=40 06:36:37 Get A/D value=-858993460 result=40 06:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:37 Aux= 06:36:37 Message to Camera, serial 268217 queued 06:37:14 Received message from Master: op=PointingHead serial=268230 06:37:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:37:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:37:14 Point started: ret=0 06:37:14 point_skyscan result=0 06:37:15 Check angles 06:37:15 SkyScan query 06:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 06:37:16 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 06:37:16 Check angles 06:37:16 SkyScan query 06:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 06:37:16 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 06:37:17 Check angles 06:37:17 SkyScan query 06:37:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.95<-16330 Statuses=0008 0009 06:37:17 Msec=1500 True Az=112.995 Ze=-64.95 Az status=0008 Ze status=0009 06:37:17 Check angles 06:37:17 SkyScan query 06:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.905<-17727 Statuses=0008 0009 06:37:18 Msec=2250 True Az=112.995 Ze=-85.905 Az status=0008 Ze status=0009 06:37:18 Check angles 06:37:18 SkyScan query 06:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.83<-19122 Statuses=0008 0009 06:37:19 Msec=3000 True Az=112.995 Ze=-106.83 Az status=0008 Ze status=0009 06:37:19 Check angles 06:37:19 SkyScan query 06:37:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.8<-20520 Statuses=0008 0009 06:37:19 Msec=3750 True Az=112.995 Ze=-127.8 Az status=0008 Ze status=0009 06:37:20 Check angles 06:37:20 SkyScan query 06:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.725<-21915 Statuses=0008 0009 06:37:20 Msec=4500 True Az=112.995 Ze=-148.725 Az status=0008 Ze status=0009 06:37:20 Check angles 06:37:20 SkyScan query 06:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 06:37:21 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 06:37:21 Check angles 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:37:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:37:22 Message to Master queued w/err=0: serial=268230 error=0 06:37:27 Received message from Master: op=Filter serial=268231 06:37:27 Color wheel filter change from 0 to 0 06:37:27 FLIGetFilterPos err=0 currentPosition=0 06:37:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:27 Filter is already there-color wheel unchanged 06:37:27 Received message from Master: op=Shutter serial=268232 06:37:27 Shutter LASER open 06:37:27 Received message from Camera: op=State serial=268234 06:37:27 GetSingleValue result=40 Value=cccccccc 06:37:27 SkyScan query 06:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:37:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:28 Parameters OK 06:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:28 Set A/D data flow result=40 06:37:28 Set A/D channel type result=40 06:37:28 Set A/D encoding result=40 06:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:28 Set channel filter=0.000000e+000 result=40 06:37:28 Config A/D Result=40 06:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:28 Get A/D filter: -9.255963e+061 result=40 06:37:28 Get A/D value=-858993460 result=40 06:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:28 Parameters OK 06:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:28 Set A/D data flow result=40 06:37:28 Set A/D channel type result=40 06:37:28 Set A/D encoding result=40 06:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:28 Set channel filter=0.000000e+000 result=40 06:37:28 Config A/D Result=40 06:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:28 Get A/D filter: -9.255963e+061 result=40 06:37:28 Get A/D value=-858993460 result=40 06:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:28 Aux= 06:37:28 Message to Camera, serial 268234 queued 06:37:36 Received message from Master: op=Shutter serial=268244 06:37:36 Shutter LASER close 06:37:37 Received message from Master: op=PointingHead serial=268248 06:37:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:37:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:37:37 Point started: ret=0 06:37:37 point_skyscan result=0 06:37:38 Check angles 06:37:38 SkyScan query 06:37:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 06:37:38 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 06:37:38 Check angles 06:37:38 SkyScan query 06:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 06:37:39 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 06:37:39 Check angles 06:37:39 SkyScan query 06:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 06:37:40 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 06:37:40 Check angles 06:37:40 SkyScan query 06:37:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 06:37:40 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 06:37:41 Check angles 06:37:41 SkyScan query 06:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 06:37:41 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 06:37:41 Check angles 06:37:41 SkyScan query 06:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 06:37:42 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 06:37:42 Check angles 06:37:42 SkyScan query 06:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.355<-13157 Statuses=0008 0009 06:37:43 Msec=4500 True Az=112.995 Ze=-17.355 Az status=0008 Ze status=0009 06:37:43 Check angles 06:37:43 SkyScan query 06:37:43 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 06:37:43 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 06:37:44 Check angles 06:37:44 SkyScan query 06:37:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:37:44 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:37:44 Message to Master queued w/err=0: serial=268248 error=0 06:37:49 Received message from Master: op=Filter serial=268249 06:37:49 Color wheel filter change from 0 to 0 06:37:49 FLIGetFilterPos err=0 currentPosition=0 06:37:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:49 Filter is already there-color wheel unchanged 06:37:49 Received message from Master: op=Shutter serial=268250 06:37:49 Shutter LASER close 06:37:50 Received message from Camera: op=State serial=268252 06:37:50 GetSingleValue result=40 Value=cccccccc 06:37:50 SkyScan query 06:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:37:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:50 Parameters OK 06:37:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:50 Set A/D data flow result=40 06:37:50 Set A/D channel type result=40 06:37:50 Set A/D encoding result=40 06:37:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:50 Set channel filter=0.000000e+000 result=40 06:37:50 Config A/D Result=40 06:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:50 Get A/D filter: -9.255963e+061 result=40 06:37:50 Get A/D value=-858993460 result=40 06:37:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:50 Parameters OK 06:37:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:50 Set A/D data flow result=40 06:37:50 Set A/D channel type result=40 06:37:50 Set A/D encoding result=40 06:37:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:50 Set channel filter=0.000000e+000 result=40 06:37:50 Config A/D Result=40 06:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:50 Get A/D filter: -9.255963e+061 result=40 06:37:50 Get A/D value=-858993460 result=40 06:37:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:50 Aux= 06:37:50 Message to Camera, serial 268252 queued 06:38:27 Received message from Master: op=PointingHead serial=268265 06:38:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:38:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:38:27 Point started: ret=0 06:38:27 point_skyscan result=0 06:38:28 Check angles 06:38:28 SkyScan query 06:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:38:29 Message to Master queued w/err=0: serial=268265 error=0 06:38:34 Received message from Master: op=Filter serial=268266 06:38:34 Color wheel filter change from 0 to 0 06:38:34 FLIGetFilterPos err=0 currentPosition=0 06:38:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:34 Filter is already there-color wheel unchanged 06:38:34 Received message from Master: op=Shutter serial=268267 06:38:34 Shutter LASER close 06:38:34 Received message from Camera: op=State serial=268269 06:38:34 GetSingleValue result=40 Value=cccccccc 06:38:34 SkyScan query 06:38:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:38:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:34 Parameters OK 06:38:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:34 Set A/D data flow result=40 06:38:34 Set A/D channel type result=40 06:38:34 Set A/D encoding result=40 06:38:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:34 Set channel filter=0.000000e+000 result=40 06:38:34 Config A/D Result=40 06:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:34 Get A/D filter: -9.255963e+061 result=40 06:38:34 Get A/D value=-858993460 result=40 06:38:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:34 Parameters OK 06:38:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:34 Set A/D data flow result=40 06:38:34 Set A/D channel type result=40 06:38:34 Set A/D encoding result=40 06:38:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:34 Set channel filter=0.000000e+000 result=40 06:38:34 Config A/D Result=40 06:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:34 Get A/D filter: -9.255963e+061 result=40 06:38:34 Get A/D value=-858993460 result=40 06:38:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:34 Aux= 06:38:34 Message to Camera, serial 268269 queued 06:39:11 Received message from Master: op=PointingHead serial=268282 06:39:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:12 Point started: ret=0 06:39:12 point_skyscan result=0 06:39:12 Check angles 06:39:12 SkyScan query 06:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:13 Message to Master queued w/err=0: serial=268282 error=0 06:39:18 Received message from Master: op=Filter serial=268283 06:39:18 Color wheel filter change from 0 to 0 06:39:18 FLIGetFilterPos err=0 currentPosition=0 06:39:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:18 Filter is already there-color wheel unchanged 06:39:18 Received message from Master: op=Shutter serial=268284 06:39:18 Shutter LASER close 06:39:18 Received message from Camera: op=State serial=268286 06:39:18 GetSingleValue result=40 Value=cccccccc 06:39:18 SkyScan query 06:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:19 Parameters OK 06:39:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:19 Set A/D data flow result=40 06:39:19 Set A/D channel type result=40 06:39:19 Set A/D encoding result=40 06:39:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:19 Set channel filter=0.000000e+000 result=40 06:39:19 Config A/D Result=40 06:39:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:19 Get A/D filter: -9.255963e+061 result=40 06:39:19 Get A/D value=-858993460 result=40 06:39:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:19 Parameters OK 06:39:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:19 Set A/D data flow result=40 06:39:19 Set A/D channel type result=40 06:39:19 Set A/D encoding result=40 06:39:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:19 Set channel filter=0.000000e+000 result=40 06:39:19 Config A/D Result=40 06:39:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:19 Get A/D filter: -9.255963e+061 result=40 06:39:19 Get A/D value=-858993460 result=40 06:39:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:19 Aux= 06:39:19 Message to Camera, serial 268286 queued 06:39:56 Received message from Master: op=PointingHead serial=268299 06:39:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:39:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:39:56 Point started: ret=0 06:39:56 point_skyscan result=0 06:39:57 Check angles 06:39:57 SkyScan query 06:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:39:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:39:57 Message to Master queued w/err=0: serial=268299 error=0 06:40:02 Received message from Master: op=Filter serial=268300 06:40:02 Color wheel filter change from 0 to 0 06:40:02 FLIGetFilterPos err=0 currentPosition=0 06:40:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:02 Filter is already there-color wheel unchanged 06:40:02 Received message from Master: op=Shutter serial=268301 06:40:02 Shutter LASER close 06:40:02 Received message from Camera: op=State serial=268303 06:40:02 GetSingleValue result=40 Value=cccccccc 06:40:02 SkyScan query 06:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:40:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:03 Parameters OK 06:40:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:03 Set A/D data flow result=40 06:40:03 Set A/D channel type result=40 06:40:03 Set A/D encoding result=40 06:40:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:03 Set channel filter=0.000000e+000 result=40 06:40:03 Config A/D Result=40 06:40:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:03 Get A/D filter: -9.255963e+061 result=40 06:40:03 Get A/D value=-858993460 result=40 06:40:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:03 Parameters OK 06:40:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:03 Set A/D data flow result=40 06:40:03 Set A/D channel type result=40 06:40:03 Set A/D encoding result=40 06:40:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:03 Set channel filter=0.000000e+000 result=40 06:40:03 Config A/D Result=40 06:40:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:03 Get A/D filter: -9.255963e+061 result=40 06:40:03 Get A/D value=-858993460 result=40 06:40:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:03 Aux= 06:40:03 Message to Camera, serial 268303 queued 06:40:40 Received message from Master: op=PointingHead serial=268316 06:40:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:40 Point started: ret=0 06:40:40 point_skyscan result=0 06:40:41 Check angles 06:40:41 SkyScan query 06:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 06:40:42 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 06:40:42 Check angles 06:40:42 SkyScan query 06:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 06:40:42 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 06:40:42 Check angles 06:40:42 SkyScan query 06:40:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 06:40:43 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 06:40:43 Check angles 06:40:43 SkyScan query 06:40:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 06:40:44 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 06:40:44 Check angles 06:40:44 SkyScan query 06:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 06:40:45 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 06:40:45 Check angles 06:40:45 SkyScan query 06:40:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 06:40:45 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 06:40:46 Check angles 06:40:46 SkyScan query 06:40:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 06:40:46 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 06:40:46 Check angles 06:40:46 SkyScan query 06:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 06:40:47 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 06:40:47 Check angles 06:40:47 SkyScan query 06:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:40:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:40:48 Message to Master queued w/err=0: serial=268316 error=0 06:40:53 Received message from Master: op=Filter serial=268317 06:40:53 Color wheel filter change from 0 to 0 06:40:53 FLIGetFilterPos err=0 currentPosition=0 06:40:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:53 Filter is already there-color wheel unchanged 06:40:53 Received message from Master: op=Shutter serial=268318 06:40:53 Shutter LASER open 06:40:53 Received message from Camera: op=State serial=268320 06:40:53 GetSingleValue result=40 Value=cccccccc 06:40:53 SkyScan query 06:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:40:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:53 Parameters OK 06:40:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:53 Set A/D data flow result=40 06:40:53 Set A/D channel type result=40 06:40:53 Set A/D encoding result=40 06:40:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:53 Set channel filter=0.000000e+000 result=40 06:40:53 Config A/D Result=40 06:40:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:53 Get A/D filter: -9.255963e+061 result=40 06:40:53 Get A/D value=-858993460 result=40 06:40:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:53 Parameters OK 06:40:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:53 Set A/D data flow result=40 06:40:53 Set A/D channel type result=40 06:40:53 Set A/D encoding result=40 06:40:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:53 Set channel filter=0.000000e+000 result=40 06:40:53 Config A/D Result=40 06:40:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:53 Get A/D filter: -9.255963e+061 result=40 06:40:53 Get A/D value=-858993460 result=40 06:40:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:53 Aux= 06:40:53 Message to Camera, serial 268320 queued 06:41:02 Received message from Master: op=Shutter serial=268330 06:41:02 Shutter LASER close 06:41:02 Received message from Master: op=PointingHead serial=268334 06:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:03 Point started: ret=0 06:41:03 point_skyscan result=0 06:41:04 Check angles 06:41:04 SkyScan query 06:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 06:41:04 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 06:41:04 Check angles 06:41:04 SkyScan query 06:41:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.53<-20102 Statuses=0008 0009 06:41:05 Msec=750 True Az=112.995 Ze=-121.53 Az status=0008 Ze status=0009 06:41:05 Check angles 06:41:05 SkyScan query 06:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.59<-18706 Statuses=0008 0009 06:41:06 Msec=1500 True Az=112.995 Ze=-100.59 Az status=0008 Ze status=0009 06:41:06 Check angles 06:41:06 SkyScan query 06:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 06:41:06 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 06:41:07 Check angles 06:41:07 SkyScan query 06:41:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 06:41:07 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 06:41:07 Check angles 06:41:07 SkyScan query 06:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.32<-14488 Statuses=0008 0009 06:41:08 Msec=3750 True Az=112.995 Ze=-37.32 Az status=0008 Ze status=0009 06:41:08 Check angles 06:41:08 SkyScan query 06:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.32<-13088 Statuses=0008 0009 06:41:09 Msec=4500 True Az=112.995 Ze=-16.32 Az status=0008 Ze status=0009 06:41:09 Check angles 06:41:09 SkyScan query 06:41:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.485<-11701 Statuses=0008 0009 06:41:09 Msec=5250 True Az=112.995 Ze=4.485 Az status=0008 Ze status=0009 06:41:10 Check angles 06:41:10 SkyScan query 06:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:41:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:41:10 Message to Master queued w/err=0: serial=268334 error=0 06:41:15 Received message from Master: op=Filter serial=268335 06:41:15 Color wheel filter change from 0 to 0 06:41:15 FLIGetFilterPos err=0 currentPosition=0 06:41:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:15 Filter is already there-color wheel unchanged 06:41:15 Received message from Master: op=Shutter serial=268336 06:41:15 Shutter LASER close 06:41:16 Received message from Camera: op=State serial=268338 06:41:16 GetSingleValue result=40 Value=cccccccc 06:41:16 SkyScan query 06:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:16 Parameters OK 06:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:16 Set A/D data flow result=40 06:41:16 Set A/D channel type result=40 06:41:16 Set A/D encoding result=40 06:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:16 Set channel filter=0.000000e+000 result=40 06:41:16 Config A/D Result=40 06:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:16 Get A/D filter: -9.255963e+061 result=40 06:41:16 Get A/D value=-858993460 result=40 06:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:16 Parameters OK 06:41:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:16 Set A/D data flow result=40 06:41:16 Set A/D channel type result=40 06:41:16 Set A/D encoding result=40 06:41:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:16 Set channel filter=0.000000e+000 result=40 06:41:16 Config A/D Result=40 06:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:16 Get A/D filter: -9.255963e+061 result=40 06:41:16 Get A/D value=-858993460 result=40 06:41:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:16 Aux= 06:41:16 Message to Camera, serial 268338 queued 06:41:52 Received message from Master: op=PointingHead serial=268350 06:41:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:41:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:41:52 Point started: ret=0 06:41:52 point_skyscan result=0 06:41:53 Check angles 06:41:53 SkyScan query 06:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:41:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:41:54 Message to Master queued w/err=0: serial=268350 error=0 06:41:59 Received message from Master: op=Filter serial=268351 06:41:59 Color wheel filter change from 0 to 0 06:41:59 FLIGetFilterPos err=0 currentPosition=0 06:41:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:59 Filter is already there-color wheel unchanged 06:41:59 Received message from Master: op=Shutter serial=268352 06:41:59 Shutter LASER close 06:41:59 Received message from Camera: op=State serial=268354 06:41:59 GetSingleValue result=40 Value=cccccccc 06:41:59 SkyScan query 06:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:42:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:00 Parameters OK 06:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:00 Set A/D data flow result=40 06:42:00 Set A/D channel type result=40 06:42:00 Set A/D encoding result=40 06:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:00 Set channel filter=0.000000e+000 result=40 06:42:00 Config A/D Result=40 06:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:00 Get A/D filter: -9.255963e+061 result=40 06:42:00 Get A/D value=-858993460 result=40 06:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:00 Parameters OK 06:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:00 Set A/D data flow result=40 06:42:00 Set A/D channel type result=40 06:42:00 Set A/D encoding result=40 06:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:00 Set channel filter=0.000000e+000 result=40 06:42:00 Config A/D Result=40 06:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:00 Get A/D filter: -9.255963e+061 result=40 06:42:00 Get A/D value=-858993460 result=40 06:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:00 Aux= 06:42:00 Message to Camera, serial 268354 queued 06:42:36 Received message from Master: op=PointingHead serial=268367 06:42:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:42:36 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:42:37 Point started: ret=0 06:42:37 point_skyscan result=0 06:42:37 Check angles 06:42:37 SkyScan query 06:42:38 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 06:42:38 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 06:42:38 Check angles 06:42:38 SkyScan query 06:42:39 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 06:42:39 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 06:42:39 Check angles 06:42:39 SkyScan query 06:42:40 SkyScan query done: ret=0 az=170.94<-11396 ze=-6.495<-12433 Statuses=0009 0008 06:42:40 Msec=1500 True Az=170.94 Ze=-6.495 Az status=0009 Ze status=0008 06:42:40 Check angles 06:42:40 SkyScan query 06:42:40 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:42:40 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:42:40 Message to Master queued w/err=0: serial=268367 error=0 06:42:45 Received message from Master: op=Filter serial=268368 06:42:45 Color wheel filter change from 0 to 0 06:42:45 FLIGetFilterPos err=0 currentPosition=0 06:42:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:45 Filter is already there-color wheel unchanged 06:42:45 Received message from Master: op=Shutter serial=268369 06:42:45 Shutter LASER close 06:42:46 Received message from Camera: op=State serial=268371 06:42:46 GetSingleValue result=40 Value=cccccccc 06:42:46 SkyScan query 06:42:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:46 Parameters OK 06:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:46 Set A/D data flow result=40 06:42:46 Set A/D channel type result=40 06:42:46 Set A/D encoding result=40 06:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:46 Set channel filter=0.000000e+000 result=40 06:42:46 Config A/D Result=40 06:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:46 Get A/D filter: -9.255963e+061 result=40 06:42:46 Get A/D value=-858993460 result=40 06:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:46 Parameters OK 06:42:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:46 Set A/D data flow result=40 06:42:46 Set A/D channel type result=40 06:42:46 Set A/D encoding result=40 06:42:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:46 Set channel filter=0.000000e+000 result=40 06:42:46 Config A/D Result=40 06:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:46 Get A/D filter: -9.255963e+061 result=40 06:42:46 Get A/D value=-858993460 result=40 06:42:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:46 Aux= 06:42:46 Message to Camera, serial 268371 queued 06:43:23 Received message from Master: op=PointingHead serial=268384 06:43:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:43:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:43:23 Point started: ret=0 06:43:23 point_skyscan result=0 06:43:24 Check angles 06:43:24 SkyScan query 06:43:25 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 06:43:25 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 06:43:25 Check angles 06:43:25 SkyScan query 06:43:25 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 06:43:25 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 06:43:26 Check angles 06:43:26 SkyScan query 06:43:26 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 06:43:26 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 06:43:26 Check angles 06:43:26 SkyScan query 06:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:43:27 Message to Master queued w/err=0: serial=268384 error=0 06:43:32 Received message from Master: op=Filter serial=268385 06:43:32 Color wheel filter change from 0 to 0 06:43:32 FLIGetFilterPos err=0 currentPosition=0 06:43:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:32 Filter is already there-color wheel unchanged 06:43:32 Received message from Master: op=Shutter serial=268386 06:43:32 Shutter LASER close 06:43:32 Received message from Camera: op=State serial=268388 06:43:32 GetSingleValue result=40 Value=cccccccc 06:43:32 SkyScan query 06:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:43:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:33 Parameters OK 06:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:33 Set A/D data flow result=40 06:43:33 Set A/D channel type result=40 06:43:33 Set A/D encoding result=40 06:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:33 Set channel filter=0.000000e+000 result=40 06:43:33 Config A/D Result=40 06:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:33 Get A/D filter: -9.255963e+061 result=40 06:43:33 Get A/D value=-858993460 result=40 06:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:33 Parameters OK 06:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:33 Set A/D data flow result=40 06:43:33 Set A/D channel type result=40 06:43:33 Set A/D encoding result=40 06:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:33 Set channel filter=0.000000e+000 result=40 06:43:33 Config A/D Result=40 06:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:33 Get A/D filter: -9.255963e+061 result=40 06:43:33 Get A/D value=-858993460 result=40 06:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:33 Aux= 06:43:33 Message to Camera, serial 268388 queued [UTC 2019-3-14 06:43:48] 06:44:09 Received message from Master: op=PointingHead serial=268401 06:44:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:44:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:44:10 Point started: ret=0 06:44:10 point_skyscan result=0 06:44:11 Check angles 06:44:11 SkyScan query 06:44:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.745<-13583 Statuses=0008 0009 06:44:11 Msec=0 True Az=112.995 Ze=-23.745 Az status=0008 Ze status=0009 06:44:11 Check angles 06:44:11 SkyScan query 06:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 06:44:12 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 06:44:12 Check angles 06:44:12 SkyScan query 06:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 06:44:13 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 06:44:13 Check angles 06:44:13 SkyScan query 06:44:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 06:44:13 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 06:44:14 Check angles 06:44:14 SkyScan query 06:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 06:44:14 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 06:44:14 Check angles 06:44:14 SkyScan query 06:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.405<-20627 Statuses=0008 0009 06:44:15 Msec=3750 True Az=112.995 Ze=-129.405 Az status=0008 Ze status=0009 06:44:15 Check angles 06:44:15 SkyScan query 06:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 06:44:16 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 06:44:16 Check angles 06:44:16 SkyScan query 06:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 06:44:16 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 06:44:17 Check angles 06:44:17 SkyScan query 06:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:44:17 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:44:17 Message to Master queued w/err=0: serial=268401 error=0 06:44:22 Received message from Master: op=Filter serial=268402 06:44:22 Color wheel filter change from 0 to 0 06:44:22 FLIGetFilterPos err=0 currentPosition=0 06:44:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:22 Filter is already there-color wheel unchanged 06:44:22 Received message from Master: op=Shutter serial=268403 06:44:22 Shutter LASER open 06:44:23 Received message from Camera: op=State serial=268405 06:44:23 GetSingleValue result=40 Value=cccccccc 06:44:23 SkyScan query 06:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:23 Parameters OK 06:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:23 Set A/D data flow result=40 06:44:23 Set A/D channel type result=40 06:44:23 Set A/D encoding result=40 06:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:23 Set channel filter=0.000000e+000 result=40 06:44:23 Config A/D Result=40 06:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:23 Get A/D filter: -9.255963e+061 result=40 06:44:23 Get A/D value=-858993460 result=40 06:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:23 Parameters OK 06:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:23 Set A/D data flow result=40 06:44:23 Set A/D channel type result=40 06:44:23 Set A/D encoding result=40 06:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:23 Set channel filter=0.000000e+000 result=40 06:44:23 Config A/D Result=40 06:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:23 Get A/D filter: -9.255963e+061 result=40 06:44:23 Get A/D value=-858993460 result=40 06:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:23 Aux= 06:44:23 Message to Camera, serial 268405 queued 06:44:32 Received message from Master: op=Shutter serial=268415 06:44:32 Shutter LASER close 06:44:32 Received message from Master: op=PointingHead serial=268419 06:44:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:44:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:44:32 Point started: ret=0 06:44:32 point_skyscan result=0 06:44:33 Check angles 06:44:33 SkyScan query 06:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 06:44:34 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 06:44:34 Check angles 06:44:34 SkyScan query 06:44:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 06:44:34 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 06:44:35 Check angles 06:44:35 SkyScan query 06:44:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 06:44:35 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 06:44:35 Check angles 06:44:35 SkyScan query 06:44:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.07<-17338 Statuses=0008 0009 06:44:36 Msec=2250 True Az=112.995 Ze=-80.07 Az status=0008 Ze status=0009 06:44:36 Check angles 06:44:36 SkyScan query 06:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 06:44:37 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 06:44:37 Check angles 06:44:37 SkyScan query 06:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 06:44:37 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 06:44:38 Check angles 06:44:38 SkyScan query 06:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 06:44:38 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 06:44:38 Check angles 06:44:38 SkyScan query 06:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 06:44:39 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 06:44:39 Check angles 06:44:39 SkyScan query 06:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:44:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:44:40 Message to Master queued w/err=0: serial=268419 error=0 06:44:45 Received message from Master: op=Filter serial=268420 06:44:45 Color wheel filter change from 0 to 0 06:44:45 FLIGetFilterPos err=0 currentPosition=0 06:44:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:45 Filter is already there-color wheel unchanged 06:44:45 Received message from Master: op=Shutter serial=268421 06:44:45 Shutter LASER close 06:44:45 Received message from Camera: op=State serial=268423 06:44:45 GetSingleValue result=40 Value=cccccccc 06:44:45 SkyScan query 06:44:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:44:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:46 Parameters OK 06:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:46 Set A/D data flow result=40 06:44:46 Set A/D channel type result=40 06:44:46 Set A/D encoding result=40 06:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:46 Set channel filter=0.000000e+000 result=40 06:44:46 Config A/D Result=40 06:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:46 Get A/D filter: -9.255963e+061 result=40 06:44:46 Get A/D value=-858993460 result=40 06:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:46 Parameters OK 06:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:46 Set A/D data flow result=40 06:44:46 Set A/D channel type result=40 06:44:46 Set A/D encoding result=40 06:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:46 Set channel filter=0.000000e+000 result=40 06:44:46 Config A/D Result=40 06:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:46 Get A/D filter: -9.255963e+061 result=40 06:44:46 Get A/D value=-858993460 result=40 06:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:46 Aux= 06:44:46 Message to Camera, serial 268423 queued 06:45:22 Received message from Master: op=PointingHead serial=268435 06:45:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:45:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:45:22 Point started: ret=0 06:45:22 point_skyscan result=0 06:45:23 Check angles 06:45:23 SkyScan query 06:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:45:23 Message to Master queued w/err=0: serial=268435 error=0 06:45:28 Received message from Master: op=Filter serial=268436 06:45:28 Color wheel filter change from 0 to 0 06:45:28 FLIGetFilterPos err=0 currentPosition=0 06:45:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:28 Filter is already there-color wheel unchanged 06:45:28 Received message from Master: op=Shutter serial=268437 06:45:28 Shutter LASER close 06:45:28 Received message from Camera: op=State serial=268439 06:45:28 GetSingleValue result=40 Value=cccccccc 06:45:28 SkyScan query 06:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:45:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:29 Parameters OK 06:45:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:29 Set A/D data flow result=40 06:45:29 Set A/D channel type result=40 06:45:29 Set A/D encoding result=40 06:45:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:29 Set channel filter=0.000000e+000 result=40 06:45:29 Config A/D Result=40 06:45:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:29 Get A/D filter: -9.255963e+061 result=40 06:45:29 Get A/D value=-858993460 result=40 06:45:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:29 Parameters OK 06:45:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:29 Set A/D data flow result=40 06:45:29 Set A/D channel type result=40 06:45:29 Set A/D encoding result=40 06:45:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:29 Set channel filter=0.000000e+000 result=40 06:45:29 Config A/D Result=40 06:45:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:29 Get A/D filter: -9.255963e+061 result=40 06:45:29 Get A/D value=-858993460 result=40 06:45:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:29 Aux= 06:45:29 Message to Camera, serial 268439 queued 06:46:06 Received message from Master: op=PointingHead serial=268452 06:46:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:06 Point started: ret=0 06:46:06 point_skyscan result=0 06:46:07 Check angles 06:46:07 SkyScan query 06:46:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:07 Message to Master queued w/err=0: serial=268452 error=0 06:46:12 Received message from Master: op=Filter serial=268453 06:46:12 Color wheel filter change from 0 to 0 06:46:12 FLIGetFilterPos err=0 currentPosition=0 06:46:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:12 Filter is already there-color wheel unchanged 06:46:13 Received message from Master: op=Shutter serial=268454 06:46:13 Shutter LASER close 06:46:13 Received message from Camera: op=State serial=268456 06:46:13 GetSingleValue result=40 Value=cccccccc 06:46:13 SkyScan query 06:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:13 Parameters OK 06:46:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:13 Set A/D data flow result=40 06:46:13 Set A/D channel type result=40 06:46:13 Set A/D encoding result=40 06:46:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:13 Set channel filter=0.000000e+000 result=40 06:46:13 Config A/D Result=40 06:46:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:13 Get A/D filter: -9.255963e+061 result=40 06:46:13 Get A/D value=-858993460 result=40 06:46:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:13 Parameters OK 06:46:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:13 Set A/D data flow result=40 06:46:13 Set A/D channel type result=40 06:46:13 Set A/D encoding result=40 06:46:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:13 Set channel filter=0.000000e+000 result=40 06:46:13 Config A/D Result=40 06:46:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:13 Get A/D filter: -9.255963e+061 result=40 06:46:13 Get A/D value=-858993460 result=40 06:46:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:13 Aux= 06:46:13 Message to Camera, serial 268456 queued 06:46:49 Received message from Master: op=PointingHead serial=268468 06:46:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:46:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:46:50 Point started: ret=0 06:46:50 point_skyscan result=0 06:46:50 Check angles 06:46:50 SkyScan query 06:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:46:51 Message to Master queued w/err=0: serial=268468 error=0 06:46:56 Received message from Master: op=Filter serial=268469 06:46:56 Color wheel filter change from 0 to 0 06:46:56 FLIGetFilterPos err=0 currentPosition=0 06:46:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:56 Filter is already there-color wheel unchanged 06:46:56 Received message from Master: op=Shutter serial=268470 06:46:56 Shutter LASER close 06:46:56 Received message from Camera: op=State serial=268472 06:46:56 GetSingleValue result=40 Value=cccccccc 06:46:56 SkyScan query 06:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:46:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:57 Parameters OK 06:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:57 Set A/D data flow result=40 06:46:57 Set A/D channel type result=40 06:46:57 Set A/D encoding result=40 06:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:57 Set channel filter=0.000000e+000 result=40 06:46:57 Config A/D Result=40 06:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:57 Get A/D filter: -9.255963e+061 result=40 06:46:57 Get A/D value=-858993460 result=40 06:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:57 Parameters OK 06:46:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:57 Set A/D data flow result=40 06:46:57 Set A/D channel type result=40 06:46:57 Set A/D encoding result=40 06:46:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:57 Set channel filter=0.000000e+000 result=40 06:46:57 Config A/D Result=40 06:46:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:57 Get A/D filter: -9.255963e+061 result=40 06:46:57 Get A/D value=-858993460 result=40 06:46:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:57 Aux= 06:46:57 Message to Camera, serial 268472 queued 06:47:34 Received message from Master: op=PointingHead serial=268485 06:47:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:47:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:47:34 Point started: ret=0 06:47:34 point_skyscan result=0 06:47:35 Check angles 06:47:35 SkyScan query 06:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 06:47:35 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 06:47:35 Check angles 06:47:35 SkyScan query 06:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 06:47:36 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 06:47:36 Check angles 06:47:36 SkyScan query 06:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 06:47:37 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 06:47:37 Check angles 06:47:37 SkyScan query 06:47:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 06:47:37 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 06:47:38 Check angles 06:47:38 SkyScan query 06:47:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.01<-19134 Statuses=0008 0009 06:47:38 Msec=3000 True Az=112.995 Ze=-107.01 Az status=0008 Ze status=0009 06:47:38 Check angles 06:47:38 SkyScan query 06:47:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.01<-20534 Statuses=0008 0009 06:47:39 Msec=3750 True Az=112.995 Ze=-128.01 Az status=0008 Ze status=0009 06:47:39 Check angles 06:47:39 SkyScan query 06:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 06:47:40 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 06:47:40 Check angles 06:47:40 SkyScan query 06:47:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 06:47:40 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 06:47:41 Check angles 06:47:41 SkyScan query 06:47:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:47:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:47:41 Message to Master queued w/err=0: serial=268485 error=0 06:47:46 Received message from Master: op=Filter serial=268486 06:47:46 Color wheel filter change from 0 to 0 06:47:46 FLIGetFilterPos err=0 currentPosition=0 06:47:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:46 Filter is already there-color wheel unchanged 06:47:46 Received message from Master: op=Shutter serial=268487 06:47:46 Shutter LASER open 06:47:47 Received message from Camera: op=State serial=268489 06:47:47 GetSingleValue result=40 Value=cccccccc 06:47:47 SkyScan query 06:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:47 Parameters OK 06:47:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:47 Set A/D data flow result=40 06:47:47 Set A/D channel type result=40 06:47:47 Set A/D encoding result=40 06:47:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:47 Set channel filter=0.000000e+000 result=40 06:47:47 Config A/D Result=40 06:47:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:47 Get A/D filter: -9.255963e+061 result=40 06:47:47 Get A/D value=-858993460 result=40 06:47:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:47 Parameters OK 06:47:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:47 Set A/D data flow result=40 06:47:47 Set A/D channel type result=40 06:47:47 Set A/D encoding result=40 06:47:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:47 Set channel filter=0.000000e+000 result=40 06:47:47 Config A/D Result=40 06:47:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:47 Get A/D filter: -9.255963e+061 result=40 06:47:47 Get A/D value=-858993460 result=40 06:47:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:47 Aux= 06:47:47 Message to Camera, serial 268489 queued 06:47:56 Received message from Master: op=Shutter serial=268499 06:47:56 Shutter LASER close 06:47:56 Received message from Master: op=PointingHead serial=268503 06:47:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:47:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:47:56 Point started: ret=0 06:47:56 point_skyscan result=0 06:47:57 Check angles 06:47:57 SkyScan query 06:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 06:47:58 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 06:47:58 Check angles 06:47:58 SkyScan query 06:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 06:47:59 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 06:47:59 Check angles 06:47:59 SkyScan query 06:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 06:47:59 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 06:47:59 Check angles 06:47:59 SkyScan query 06:48:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.4<-17360 Statuses=0008 0009 06:48:00 Msec=2250 True Az=112.995 Ze=-80.4 Az status=0008 Ze status=0009 06:48:00 Check angles 06:48:00 SkyScan query 06:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 06:48:01 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 06:48:01 Check angles 06:48:01 SkyScan query 06:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 06:48:02 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 06:48:02 Check angles 06:48:02 SkyScan query 06:48:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 06:48:02 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 06:48:03 Check angles 06:48:03 SkyScan query 06:48:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 06:48:03 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 06:48:03 Check angles 06:48:03 SkyScan query 06:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:48:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:48:04 Message to Master queued w/err=0: serial=268503 error=0 06:48:09 Received message from Master: op=Filter serial=268504 06:48:09 Color wheel filter change from 0 to 0 06:48:09 FLIGetFilterPos err=0 currentPosition=0 06:48:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:09 Filter is already there-color wheel unchanged 06:48:09 Received message from Master: op=Shutter serial=268505 06:48:09 Shutter LASER close 06:48:09 Received message from Camera: op=State serial=268507 06:48:09 GetSingleValue result=40 Value=cccccccc 06:48:09 SkyScan query 06:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:10 Parameters OK 06:48:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:10 Set A/D data flow result=40 06:48:10 Set A/D channel type result=40 06:48:10 Set A/D encoding result=40 06:48:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:10 Set channel filter=0.000000e+000 result=40 06:48:10 Config A/D Result=40 06:48:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:10 Get A/D filter: -9.255963e+061 result=40 06:48:10 Get A/D value=-858993460 result=40 06:48:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:10 Parameters OK 06:48:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:10 Set A/D data flow result=40 06:48:10 Set A/D channel type result=40 06:48:10 Set A/D encoding result=40 06:48:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:10 Set channel filter=0.000000e+000 result=40 06:48:10 Config A/D Result=40 06:48:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:10 Get A/D filter: -9.255963e+061 result=40 06:48:10 Get A/D value=-858993460 result=40 06:48:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:10 Aux= 06:48:10 Message to Camera, serial 268507 queued 06:48:47 Received message from Master: op=PointingHead serial=268520 06:48:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:48:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:48:47 Point started: ret=0 06:48:47 point_skyscan result=0 06:48:48 Check angles 06:48:48 SkyScan query 06:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:48:48 Message to Master queued w/err=0: serial=268520 error=0 06:48:53 Received message from Master: op=Filter serial=268521 06:48:53 Color wheel filter change from 0 to 0 06:48:53 FLIGetFilterPos err=0 currentPosition=0 06:48:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:53 Filter is already there-color wheel unchanged 06:48:53 Received message from Master: op=Shutter serial=268522 06:48:53 Shutter LASER close 06:48:53 Received message from Camera: op=State serial=268524 06:48:53 GetSingleValue result=40 Value=cccccccc 06:48:53 SkyScan query 06:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:48:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:54 Parameters OK 06:48:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:54 Set A/D data flow result=40 06:48:54 Set A/D channel type result=40 06:48:54 Set A/D encoding result=40 06:48:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:54 Set channel filter=0.000000e+000 result=40 06:48:54 Config A/D Result=40 06:48:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:54 Get A/D filter: -9.255963e+061 result=40 06:48:54 Get A/D value=-858993460 result=40 06:48:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:54 Parameters OK 06:48:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:54 Set A/D data flow result=40 06:48:54 Set A/D channel type result=40 06:48:54 Set A/D encoding result=40 06:48:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:54 Set channel filter=0.000000e+000 result=40 06:48:54 Config A/D Result=40 06:48:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:54 Get A/D filter: -9.255963e+061 result=40 06:48:54 Get A/D value=-858993460 result=40 06:48:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:54 Aux= 06:48:54 Message to Camera, serial 268524 queued 06:49:31 Received message from Master: op=PointingHead serial=268537 06:49:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:49:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:49:31 Point started: ret=0 06:49:31 point_skyscan result=0 06:49:32 Check angles 06:49:32 SkyScan query 06:49:32 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 06:49:32 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 06:49:33 Check angles 06:49:33 SkyScan query 06:49:33 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.495<-12433 Statuses=0009 0008 06:49:33 Msec=750 True Az=153.27 Ze=-6.495 Az status=0009 Ze status=0008 06:49:33 Check angles 06:49:33 SkyScan query 06:49:34 SkyScan query done: ret=0 az=170.67<-11378 ze=-6.495<-12433 Statuses=0009 0008 06:49:34 Msec=1500 True Az=170.67 Ze=-6.495 Az status=0009 Ze status=0008 06:49:34 Check angles 06:49:34 SkyScan query 06:49:35 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:49:35 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:49:35 Message to Master queued w/err=0: serial=268537 error=0 06:49:40 Received message from Master: op=Filter serial=268538 06:49:40 Color wheel filter change from 0 to 0 06:49:40 FLIGetFilterPos err=0 currentPosition=0 06:49:40 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:40 Filter is already there-color wheel unchanged 06:49:40 Received message from Master: op=Shutter serial=268539 06:49:40 Shutter LASER close 06:49:40 Received message from Camera: op=State serial=268541 06:49:40 GetSingleValue result=40 Value=cccccccc 06:49:40 SkyScan query 06:49:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:49:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:41 Parameters OK 06:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:41 Set A/D data flow result=40 06:49:41 Set A/D channel type result=40 06:49:41 Set A/D encoding result=40 06:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:41 Set channel filter=0.000000e+000 result=40 06:49:41 Config A/D Result=40 06:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:41 Get A/D filter: -9.255963e+061 result=40 06:49:41 Get A/D value=-858993460 result=40 06:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:41 Parameters OK 06:49:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:41 Set A/D data flow result=40 06:49:41 Set A/D channel type result=40 06:49:41 Set A/D encoding result=40 06:49:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:41 Set channel filter=0.000000e+000 result=40 06:49:41 Config A/D Result=40 06:49:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:41 Get A/D filter: -9.255963e+061 result=40 06:49:41 Get A/D value=-858993460 result=40 06:49:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:41 Aux= 06:49:41 Message to Camera, serial 268541 queued 06:50:17 Received message from Master: op=PointingHead serial=268554 06:50:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:50:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:50:18 Point started: ret=0 06:50:18 point_skyscan result=0 06:50:18 Check angles 06:50:18 SkyScan query 06:50:19 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 06:50:19 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 06:50:19 Check angles 06:50:19 SkyScan query 06:50:20 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 06:50:20 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 06:50:20 Check angles 06:50:20 SkyScan query 06:50:21 SkyScan query done: ret=0 az=117.66<-7844 ze=6.495<-11567 Statuses=0009 0008 06:50:21 Msec=1500 True Az=117.66 Ze=6.495 Az status=0009 Ze status=0008 06:50:21 Check angles 06:50:21 SkyScan query 06:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:21 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:50:21 Message to Master queued w/err=0: serial=268554 error=0 06:50:26 Received message from Master: op=Filter serial=268555 06:50:26 Color wheel filter change from 0 to 0 06:50:26 FLIGetFilterPos err=0 currentPosition=0 06:50:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:26 Filter is already there-color wheel unchanged 06:50:26 Received message from Master: op=Shutter serial=268556 06:50:26 Shutter LASER close 06:50:27 Received message from Camera: op=State serial=268558 06:50:27 GetSingleValue result=40 Value=cccccccc 06:50:27 SkyScan query 06:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:50:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:27 Parameters OK 06:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:27 Set A/D data flow result=40 06:50:27 Set A/D channel type result=40 06:50:27 Set A/D encoding result=40 06:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:27 Set channel filter=0.000000e+000 result=40 06:50:27 Config A/D Result=40 06:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:27 Get A/D filter: -9.255963e+061 result=40 06:50:27 Get A/D value=-858993460 result=40 06:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:27 Parameters OK 06:50:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:27 Set A/D data flow result=40 06:50:27 Set A/D channel type result=40 06:50:27 Set A/D encoding result=40 06:50:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:27 Set channel filter=0.000000e+000 result=40 06:50:27 Config A/D Result=40 06:50:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:27 Get A/D filter: -9.255963e+061 result=40 06:50:27 Get A/D value=-858993460 result=40 06:50:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:27 Aux= 06:50:27 Message to Camera, serial 268558 queued 06:51:04 Received message from Master: op=PointingHead serial=268571 06:51:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:51:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:51:04 Point started: ret=0 06:51:04 point_skyscan result=0 06:51:05 Check angles 06:51:05 SkyScan query 06:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 06:51:06 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 06:51:06 Check angles 06:51:06 SkyScan query 06:51:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 06:51:06 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 06:51:07 Check angles 06:51:07 SkyScan query 06:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 06:51:07 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 06:51:07 Check angles 06:51:07 SkyScan query 06:51:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.115<-17741 Statuses=0008 0009 06:51:08 Msec=2250 True Az=112.995 Ze=-86.115 Az status=0008 Ze status=0009 06:51:08 Check angles 06:51:08 SkyScan query 06:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 06:51:09 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 06:51:09 Check angles 06:51:09 SkyScan query 06:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 06:51:09 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 06:51:10 Check angles 06:51:10 SkyScan query 06:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 06:51:10 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 06:51:10 Check angles 06:51:10 SkyScan query 06:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 06:51:11 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 06:51:11 Check angles 06:51:11 SkyScan query 06:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:51:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:51:12 Message to Master queued w/err=0: serial=268571 error=0 06:51:17 Received message from Master: op=Filter serial=268572 06:51:17 Color wheel filter change from 0 to 0 06:51:17 FLIGetFilterPos err=0 currentPosition=0 06:51:17 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:17 Filter is already there-color wheel unchanged 06:51:17 Received message from Master: op=Shutter serial=268573 06:51:17 Shutter LASER open 06:51:17 Received message from Camera: op=State serial=268575 06:51:17 GetSingleValue result=40 Value=cccccccc 06:51:17 SkyScan query 06:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:51:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:18 Parameters OK 06:51:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:18 Set A/D data flow result=40 06:51:18 Set A/D channel type result=40 06:51:18 Set A/D encoding result=40 06:51:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:18 Set channel filter=0.000000e+000 result=40 06:51:18 Config A/D Result=40 06:51:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:18 Get A/D filter: -9.255963e+061 result=40 06:51:18 Get A/D value=-858993460 result=40 06:51:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:18 Parameters OK 06:51:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:18 Set A/D data flow result=40 06:51:18 Set A/D channel type result=40 06:51:18 Set A/D encoding result=40 06:51:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:18 Set channel filter=0.000000e+000 result=40 06:51:18 Config A/D Result=40 06:51:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:18 Get A/D filter: -9.255963e+061 result=40 06:51:18 Get A/D value=-858993460 result=40 06:51:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:18 Aux= 06:51:18 Message to Camera, serial 268575 queued 06:51:26 Received message from Master: op=Shutter serial=268585 06:51:26 Shutter LASER close 06:51:27 Received message from Master: op=PointingHead serial=268589 06:51:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:51:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:51:27 Point started: ret=0 06:51:27 point_skyscan result=0 06:51:28 Check angles 06:51:28 SkyScan query 06:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 06:51:28 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 06:51:28 Check angles 06:51:28 SkyScan query 06:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.37<-20158 Statuses=0008 0009 06:51:29 Msec=750 True Az=112.995 Ze=-122.37 Az status=0008 Ze status=0009 06:51:29 Check angles 06:51:29 SkyScan query 06:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 06:51:30 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 06:51:30 Check angles 06:51:30 SkyScan query 06:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 06:51:30 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 06:51:31 Check angles 06:51:31 SkyScan query 06:51:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 06:51:31 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 06:51:31 Check angles 06:51:31 SkyScan query 06:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 06:51:32 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 06:51:32 Check angles 06:51:32 SkyScan query 06:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 06:51:33 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 06:51:33 Check angles 06:51:33 SkyScan query 06:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 06:51:33 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 06:51:34 Check angles 06:51:34 SkyScan query 06:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:51:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:51:34 Message to Master queued w/err=0: serial=268589 error=0 06:51:39 Received message from Master: op=Filter serial=268590 06:51:39 Color wheel filter change from 0 to 0 06:51:39 FLIGetFilterPos err=0 currentPosition=0 06:51:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:39 Filter is already there-color wheel unchanged 06:51:39 Received message from Master: op=Shutter serial=268591 06:51:39 Shutter LASER close 06:51:40 Received message from Camera: op=State serial=268593 06:51:40 GetSingleValue result=40 Value=cccccccc 06:51:40 SkyScan query 06:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:51:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:40 Parameters OK 06:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:40 Set A/D data flow result=40 06:51:40 Set A/D channel type result=40 06:51:40 Set A/D encoding result=40 06:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:40 Set channel filter=0.000000e+000 result=40 06:51:40 Config A/D Result=40 06:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:40 Get A/D filter: -9.255963e+061 result=40 06:51:40 Get A/D value=-858993460 result=40 06:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:40 Parameters OK 06:51:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:40 Set A/D data flow result=40 06:51:40 Set A/D channel type result=40 06:51:40 Set A/D encoding result=40 06:51:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:40 Set channel filter=0.000000e+000 result=40 06:51:40 Config A/D Result=40 06:51:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:40 Get A/D filter: -9.255963e+061 result=40 06:51:40 Get A/D value=-858993460 result=40 06:51:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:40 Aux= 06:51:40 Message to Camera, serial 268593 queued 06:52:17 Received message from Master: op=PointingHead serial=268606 06:52:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:52:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:52:17 Point started: ret=0 06:52:17 point_skyscan result=0 06:52:18 Check angles 06:52:18 SkyScan query 06:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:52:19 Message to Master queued w/err=0: serial=268606 error=0 06:52:24 Received message from Master: op=Filter serial=268607 06:52:24 Color wheel filter change from 0 to 0 06:52:24 FLIGetFilterPos err=0 currentPosition=0 06:52:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:24 Filter is already there-color wheel unchanged 06:52:24 Received message from Master: op=Shutter serial=268608 06:52:24 Shutter LASER close 06:52:24 Received message from Camera: op=State serial=268610 06:52:24 GetSingleValue result=40 Value=cccccccc 06:52:24 SkyScan query 06:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:52:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:24 Parameters OK 06:52:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:24 Set A/D data flow result=40 06:52:24 Set A/D channel type result=40 06:52:24 Set A/D encoding result=40 06:52:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:24 Set channel filter=0.000000e+000 result=40 06:52:24 Config A/D Result=40 06:52:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:24 Get A/D filter: -9.255963e+061 result=40 06:52:24 Get A/D value=-858993460 result=40 06:52:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:24 Parameters OK 06:52:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:24 Set A/D data flow result=40 06:52:24 Set A/D channel type result=40 06:52:24 Set A/D encoding result=40 06:52:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:24 Set channel filter=0.000000e+000 result=40 06:52:24 Config A/D Result=40 06:52:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:24 Get A/D filter: -9.255963e+061 result=40 06:52:24 Get A/D value=-858993460 result=40 06:52:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:24 Aux= 06:52:24 Message to Camera, serial 268610 queued 06:53:01 Received message from Master: op=PointingHead serial=268623 06:53:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:02 Point started: ret=0 06:53:02 point_skyscan result=0 06:53:02 Check angles 06:53:02 SkyScan query 06:53:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:03 Message to Master queued w/err=0: serial=268623 error=0 06:53:08 Received message from Master: op=Filter serial=268624 06:53:08 Color wheel filter change from 0 to 0 06:53:08 FLIGetFilterPos err=0 currentPosition=0 06:53:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:08 Filter is already there-color wheel unchanged 06:53:08 Received message from Master: op=Shutter serial=268625 06:53:08 Shutter LASER close 06:53:08 Received message from Camera: op=State serial=268627 06:53:08 GetSingleValue result=40 Value=cccccccc 06:53:08 SkyScan query 06:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:09 Parameters OK 06:53:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:09 Set A/D data flow result=40 06:53:09 Set A/D channel type result=40 06:53:09 Set A/D encoding result=40 06:53:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:09 Set channel filter=0.000000e+000 result=40 06:53:09 Config A/D Result=40 06:53:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:09 Get A/D filter: -9.255963e+061 result=40 06:53:09 Get A/D value=-858993460 result=40 06:53:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:09 Parameters OK 06:53:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:09 Set A/D data flow result=40 06:53:09 Set A/D channel type result=40 06:53:09 Set A/D encoding result=40 06:53:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:09 Set channel filter=0.000000e+000 result=40 06:53:09 Config A/D Result=40 06:53:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:09 Get A/D filter: -9.255963e+061 result=40 06:53:09 Get A/D value=-858993460 result=40 06:53:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:09 Aux= 06:53:09 Message to Camera, serial 268627 queued 06:53:46 Received message from Master: op=PointingHead serial=268640 06:53:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:53:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:53:46 Point started: ret=0 06:53:46 point_skyscan result=0 06:53:47 Check angles 06:53:47 SkyScan query 06:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:53:47 Message to Master queued w/err=0: serial=268640 error=0 06:53:52 Received message from Master: op=Filter serial=268641 06:53:52 Color wheel filter change from 0 to 0 06:53:52 FLIGetFilterPos err=0 currentPosition=0 06:53:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:52 Filter is already there-color wheel unchanged 06:53:52 Received message from Master: op=Shutter serial=268642 06:53:52 Shutter LASER close 06:53:53 Received message from Camera: op=State serial=268644 06:53:53 GetSingleValue result=40 Value=cccccccc 06:53:53 SkyScan query 06:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:53 Parameters OK 06:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:53 Set A/D data flow result=40 06:53:53 Set A/D channel type result=40 06:53:53 Set A/D encoding result=40 06:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:53 Set channel filter=0.000000e+000 result=40 06:53:53 Config A/D Result=40 06:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:53 Get A/D filter: -9.255963e+061 result=40 06:53:53 Get A/D value=-858993460 result=40 06:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:53 Parameters OK 06:53:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:53 Set A/D data flow result=40 06:53:53 Set A/D channel type result=40 06:53:53 Set A/D encoding result=40 06:53:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:53 Set channel filter=0.000000e+000 result=40 06:53:53 Config A/D Result=40 06:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:53 Get A/D filter: -9.255963e+061 result=40 06:53:53 Get A/D value=-858993460 result=40 06:53:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:53 Aux= 06:53:53 Message to Camera, serial 268644 queued 06:54:30 Received message from Master: op=PointingHead serial=268657 06:54:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:54:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:54:30 Point started: ret=0 06:54:30 point_skyscan result=0 06:54:31 Check angles 06:54:31 SkyScan query 06:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 06:54:32 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 06:54:32 Check angles 06:54:32 SkyScan query 06:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.91<-14994 Statuses=0008 0009 [UTC 2019-3-14 06:54:32] 06:54:32 Msec=750 True Az=112.995 Ze=-44.91 Az status=0008 Ze status=0009 06:54:33 Check angles 06:54:33 SkyScan query 06:54:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.865<-16391 Statuses=0008 0009 06:54:33 Msec=1500 True Az=112.995 Ze=-65.865 Az status=0008 Ze status=0009 06:54:33 Check angles 06:54:33 SkyScan query 06:54:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.835<-17789 Statuses=0008 0009 06:54:34 Msec=2250 True Az=112.995 Ze=-86.835 Az status=0008 Ze status=0009 06:54:34 Check angles 06:54:34 SkyScan query 06:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 06:54:35 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 06:54:35 Check angles 06:54:35 SkyScan query 06:54:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 06:54:35 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 06:54:36 Check angles 06:54:36 SkyScan query 06:54:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 06:54:36 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 06:54:36 Check angles 06:54:36 SkyScan query 06:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 06:54:37 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 06:54:37 Check angles 06:54:37 SkyScan query 06:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:54:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:54:38 Message to Master queued w/err=0: serial=268657 error=0 06:54:43 Received message from Master: op=Filter serial=268658 06:54:43 Color wheel filter change from 0 to 0 06:54:43 FLIGetFilterPos err=0 currentPosition=0 06:54:43 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:43 Filter is already there-color wheel unchanged 06:54:43 Received message from Master: op=Shutter serial=268659 06:54:43 Shutter LASER open 06:54:43 Received message from Camera: op=State serial=268661 06:54:43 GetSingleValue result=40 Value=cccccccc 06:54:43 SkyScan query 06:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:54:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:44 Parameters OK 06:54:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:44 Set A/D data flow result=40 06:54:44 Set A/D channel type result=40 06:54:44 Set A/D encoding result=40 06:54:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:44 Set channel filter=0.000000e+000 result=40 06:54:44 Config A/D Result=40 06:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:44 Get A/D filter: -9.255963e+061 result=40 06:54:44 Get A/D value=-858993460 result=40 06:54:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:44 Parameters OK 06:54:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:44 Set A/D data flow result=40 06:54:44 Set A/D channel type result=40 06:54:44 Set A/D encoding result=40 06:54:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:44 Set channel filter=0.000000e+000 result=40 06:54:44 Config A/D Result=40 06:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:44 Get A/D filter: -9.255963e+061 result=40 06:54:44 Get A/D value=-858993460 result=40 06:54:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:44 Aux= 06:54:44 Message to Camera, serial 268661 queued 06:54:52 Received message from Master: op=Shutter serial=268671 06:54:52 Shutter LASER close 06:54:53 Received message from Master: op=PointingHead serial=268675 06:54:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:54:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:54:53 Point started: ret=0 06:54:53 point_skyscan result=0 06:54:54 Check angles 06:54:54 SkyScan query 06:54:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 06:54:54 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 06:54:54 Check angles 06:54:54 SkyScan query 06:54:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 06:54:55 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 06:54:55 Check angles 06:54:55 SkyScan query 06:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 06:54:56 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 06:54:56 Check angles 06:54:56 SkyScan query 06:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 06:54:56 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 06:54:57 Check angles 06:54:57 SkyScan query 06:54:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 06:54:57 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 06:54:57 Check angles 06:54:57 SkyScan query 06:54:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 06:54:58 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 06:54:58 Check angles 06:54:58 SkyScan query 06:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 06:54:59 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 06:54:59 Check angles 06:54:59 SkyScan query 06:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 06:54:59 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 06:55:00 Check angles 06:55:00 SkyScan query 06:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:55:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:55:00 Message to Master queued w/err=0: serial=268675 error=0 06:55:05 Received message from Master: op=Filter serial=268676 06:55:05 Color wheel filter change from 0 to 0 06:55:05 FLIGetFilterPos err=0 currentPosition=0 06:55:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:05 Filter is already there-color wheel unchanged 06:55:05 Received message from Master: op=Shutter serial=268677 06:55:05 Shutter LASER close 06:55:06 Received message from Camera: op=State serial=268679 06:55:06 GetSingleValue result=40 Value=cccccccc 06:55:06 SkyScan query 06:55:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:06 Parameters OK 06:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:06 Set A/D data flow result=40 06:55:06 Set A/D channel type result=40 06:55:06 Set A/D encoding result=40 06:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:06 Set channel filter=0.000000e+000 result=40 06:55:06 Config A/D Result=40 06:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:06 Get A/D filter: -9.255963e+061 result=40 06:55:06 Get A/D value=-858993460 result=40 06:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:06 Parameters OK 06:55:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:06 Set A/D data flow result=40 06:55:06 Set A/D channel type result=40 06:55:06 Set A/D encoding result=40 06:55:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:06 Set channel filter=0.000000e+000 result=40 06:55:06 Config A/D Result=40 06:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:06 Get A/D filter: -9.255963e+061 result=40 06:55:06 Get A/D value=-858993460 result=40 06:55:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:06 Aux= 06:55:06 Message to Camera, serial 268679 queued 06:55:42 Received message from Master: op=PointingHead serial=268691 06:55:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:55:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:55:42 Point started: ret=0 06:55:42 point_skyscan result=0 06:55:43 Check angles 06:55:43 SkyScan query 06:55:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:55:44 Message to Master queued w/err=0: serial=268691 error=0 06:55:49 Received message from Master: op=Filter serial=268692 06:55:49 Color wheel filter change from 0 to 0 06:55:49 FLIGetFilterPos err=0 currentPosition=0 06:55:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:49 Filter is already there-color wheel unchanged 06:55:49 Received message from Master: op=Shutter serial=268693 06:55:49 Shutter LASER close 06:55:49 Received message from Camera: op=State serial=268695 06:55:49 GetSingleValue result=40 Value=cccccccc 06:55:49 SkyScan query 06:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:55:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:49 Parameters OK 06:55:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:49 Set A/D data flow result=40 06:55:49 Set A/D channel type result=40 06:55:49 Set A/D encoding result=40 06:55:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:49 Set channel filter=0.000000e+000 result=40 06:55:49 Config A/D Result=40 06:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:49 Get A/D filter: -9.255963e+061 result=40 06:55:49 Get A/D value=-858993460 result=40 06:55:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:49 Parameters OK 06:55:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:49 Set A/D data flow result=40 06:55:49 Set A/D channel type result=40 06:55:49 Set A/D encoding result=40 06:55:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:49 Set channel filter=0.000000e+000 result=40 06:55:49 Config A/D Result=40 06:55:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:49 Get A/D filter: -9.255963e+061 result=40 06:55:49 Get A/D value=-858993460 result=40 06:55:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:49 Aux= 06:55:49 Message to Camera, serial 268695 queued 06:56:26 Received message from Master: op=PointingHead serial=268708 06:56:26 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 06:56:26 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 06:56:27 Point started: ret=0 06:56:27 point_skyscan result=0 06:56:27 Check angles 06:56:27 SkyScan query 06:56:28 SkyScan query done: ret=0 az=136.185<-9079 ze=-6.51<-12434 Statuses=0009 0008 06:56:28 Msec=0 True Az=136.185 Ze=-6.51 Az status=0009 Ze status=0008 06:56:28 Check angles 06:56:28 SkyScan query 06:56:29 SkyScan query done: ret=0 az=153.6<-10240 ze=-6.495<-12433 Statuses=0009 0008 06:56:29 Msec=750 True Az=153.6 Ze=-6.495 Az status=0009 Ze status=0008 06:56:29 Check angles 06:56:29 SkyScan query 06:56:30 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 06:56:30 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 06:56:30 Check angles 06:56:30 SkyScan query 06:56:30 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 06:56:30 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 06:56:30 Message to Master queued w/err=0: serial=268708 error=0 06:56:35 Received message from Master: op=Filter serial=268709 06:56:35 Color wheel filter change from 0 to 0 06:56:35 FLIGetFilterPos err=0 currentPosition=0 06:56:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:35 Filter is already there-color wheel unchanged 06:56:35 Received message from Master: op=Shutter serial=268710 06:56:35 Shutter LASER close 06:56:36 Received message from Camera: op=State serial=268712 06:56:36 GetSingleValue result=40 Value=cccccccc 06:56:36 SkyScan query 06:56:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 06:56:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:36 Parameters OK 06:56:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:36 Set A/D data flow result=40 06:56:36 Set A/D channel type result=40 06:56:36 Set A/D encoding result=40 06:56:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:36 Set channel filter=0.000000e+000 result=40 06:56:36 Config A/D Result=40 06:56:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:36 Get A/D filter: -9.255963e+061 result=40 06:56:36 Get A/D value=-858993460 result=40 06:56:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:36 Parameters OK 06:56:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:36 Set A/D data flow result=40 06:56:36 Set A/D channel type result=40 06:56:36 Set A/D encoding result=40 06:56:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:36 Set channel filter=0.000000e+000 result=40 06:56:36 Config A/D Result=40 06:56:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:36 Get A/D filter: -9.255963e+061 result=40 06:56:36 Get A/D value=-858993460 result=40 06:56:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:36 Aux= 06:56:36 Message to Camera, serial 268712 queued 06:57:13 Received message from Master: op=PointingHead serial=268725 06:57:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:57:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:57:13 Point started: ret=0 06:57:13 point_skyscan result=0 06:57:14 Check angles 06:57:14 SkyScan query 06:57:15 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 06:57:15 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 06:57:15 Check angles 06:57:15 SkyScan query 06:57:15 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 06:57:15 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 06:57:16 Check angles 06:57:16 SkyScan query 06:57:16 SkyScan query done: ret=0 az=117.465<-7831 ze=6.495<-11567 Statuses=0009 0008 06:57:16 Msec=1500 True Az=117.465 Ze=6.495 Az status=0009 Ze status=0008 06:57:16 Check angles 06:57:16 SkyScan query 06:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:57:17 Message to Master queued w/err=0: serial=268725 error=0 06:57:22 Received message from Master: op=Filter serial=268726 06:57:22 Color wheel filter change from 0 to 0 06:57:22 FLIGetFilterPos err=0 currentPosition=0 06:57:22 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:22 Filter is already there-color wheel unchanged 06:57:22 Received message from Master: op=Shutter serial=268727 06:57:22 Shutter LASER close 06:57:22 Received message from Camera: op=State serial=268729 06:57:22 GetSingleValue result=40 Value=cccccccc 06:57:22 SkyScan query 06:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:57:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:23 Parameters OK 06:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:23 Set A/D data flow result=40 06:57:23 Set A/D channel type result=40 06:57:23 Set A/D encoding result=40 06:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:23 Set channel filter=0.000000e+000 result=40 06:57:23 Config A/D Result=40 06:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:23 Get A/D filter: -9.255963e+061 result=40 06:57:23 Get A/D value=-858993460 result=40 06:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:23 Parameters OK 06:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:23 Set A/D data flow result=40 06:57:23 Set A/D channel type result=40 06:57:23 Set A/D encoding result=40 06:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:23 Set channel filter=0.000000e+000 result=40 06:57:23 Config A/D Result=40 06:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:23 Get A/D filter: -9.255963e+061 result=40 06:57:23 Get A/D value=-858993460 result=40 06:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:23 Aux= 06:57:23 Message to Camera, serial 268729 queued 06:57:59 Received message from Master: op=PointingHead serial=268742 06:57:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:57:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:58:00 Point started: ret=0 06:58:00 point_skyscan result=0 06:58:01 Check angles 06:58:01 SkyScan query 06:58:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.55<-13570 Statuses=0008 0009 06:58:01 Msec=0 True Az=112.995 Ze=-23.55 Az status=0008 Ze status=0009 06:58:01 Check angles 06:58:01 SkyScan query 06:58:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 06:58:02 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 06:58:02 Check angles 06:58:02 SkyScan query 06:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 06:58:03 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 06:58:03 Check angles 06:58:03 SkyScan query 06:58:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 06:58:03 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 06:58:04 Check angles 06:58:04 SkyScan query 06:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 06:58:04 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 06:58:04 Check angles 06:58:04 SkyScan query 06:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 06:58:05 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 06:58:05 Check angles 06:58:05 SkyScan query 06:58:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 06:58:06 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 06:58:06 Check angles 06:58:06 SkyScan query 06:58:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 06:58:06 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 06:58:07 Check angles 06:58:07 SkyScan query 06:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:58:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:58:07 Message to Master queued w/err=0: serial=268742 error=0 06:58:12 Received message from Master: op=Filter serial=268743 06:58:12 Color wheel filter change from 0 to 0 06:58:12 FLIGetFilterPos err=0 currentPosition=0 06:58:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:12 Filter is already there-color wheel unchanged 06:58:12 Received message from Master: op=Shutter serial=268744 06:58:12 Shutter LASER open 06:58:13 Received message from Camera: op=State serial=268746 06:58:13 GetSingleValue result=40 Value=cccccccc 06:58:13 SkyScan query 06:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:13 Parameters OK 06:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:13 Set A/D data flow result=40 06:58:13 Set A/D channel type result=40 06:58:13 Set A/D encoding result=40 06:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:13 Set channel filter=0.000000e+000 result=40 06:58:13 Config A/D Result=40 06:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:13 Get A/D filter: -9.255963e+061 result=40 06:58:13 Get A/D value=-858993460 result=40 06:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:13 Parameters OK 06:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:13 Set A/D data flow result=40 06:58:13 Set A/D channel type result=40 06:58:13 Set A/D encoding result=40 06:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:13 Set channel filter=0.000000e+000 result=40 06:58:13 Config A/D Result=40 06:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:13 Get A/D filter: -9.255963e+061 result=40 06:58:13 Get A/D value=-858993460 result=40 06:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:13 Aux= 06:58:13 Message to Camera, serial 268746 queued 06:58:22 Received message from Master: op=Shutter serial=268756 06:58:22 Shutter LASER close 06:58:22 Received message from Master: op=PointingHead serial=268760 06:58:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:58:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:58:22 Point started: ret=0 06:58:22 point_skyscan result=0 06:58:23 Check angles 06:58:23 SkyScan query 06:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.755<-21517 Statuses=0008 0009 06:58:24 Msec=0 True Az=112.995 Ze=-142.755 Az status=0008 Ze status=0009 06:58:24 Check angles 06:58:24 SkyScan query 06:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 06:58:24 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 06:58:25 Check angles 06:58:25 SkyScan query 06:58:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.35<-18690 Statuses=0008 0009 06:58:25 Msec=1500 True Az=112.995 Ze=-100.35 Az status=0008 Ze status=0009 06:58:25 Check angles 06:58:25 SkyScan query 06:58:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 06:58:26 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 06:58:26 Check angles 06:58:26 SkyScan query 06:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 06:58:27 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 06:58:27 Check angles 06:58:27 SkyScan query 06:58:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 06:58:27 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 06:58:28 Check angles 06:58:28 SkyScan query 06:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 06:58:28 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 06:58:28 Check angles 06:58:28 SkyScan query 06:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 06:58:29 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 06:58:29 Check angles 06:58:29 SkyScan query 06:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 06:58:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 06:58:30 Message to Master queued w/err=0: serial=268760 error=0 06:58:35 Received message from Master: op=Filter serial=268761 06:58:35 Color wheel filter change from 0 to 0 06:58:35 FLIGetFilterPos err=0 currentPosition=0 06:58:35 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:35 Filter is already there-color wheel unchanged 06:58:35 Received message from Master: op=Shutter serial=268762 06:58:35 Shutter LASER close 06:58:35 Received message from Camera: op=State serial=268764 06:58:35 GetSingleValue result=40 Value=cccccccc 06:58:35 SkyScan query 06:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:36 Parameters OK 06:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:36 Set A/D data flow result=40 06:58:36 Set A/D channel type result=40 06:58:36 Set A/D encoding result=40 06:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:36 Set channel filter=0.000000e+000 result=40 06:58:36 Config A/D Result=40 06:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:36 Get A/D filter: -9.255963e+061 result=40 06:58:36 Get A/D value=-858993460 result=40 06:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:36 Parameters OK 06:58:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:36 Set A/D data flow result=40 06:58:36 Set A/D channel type result=40 06:58:36 Set A/D encoding result=40 06:58:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:36 Set channel filter=0.000000e+000 result=40 06:58:36 Config A/D Result=40 06:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:36 Get A/D filter: -9.255963e+061 result=40 06:58:36 Get A/D value=-858993460 result=40 06:58:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:36 Aux= 06:58:36 Message to Camera, serial 268764 queued 06:59:12 Received message from Master: op=PointingHead serial=268777 06:59:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:13 Point started: ret=0 06:59:13 point_skyscan result=0 06:59:14 Check angles 06:59:14 SkyScan query 06:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:59:14 Message to Master queued w/err=0: serial=268777 error=0 06:59:19 Received message from Master: op=Filter serial=268778 06:59:19 Color wheel filter change from 0 to 0 06:59:19 FLIGetFilterPos err=0 currentPosition=0 06:59:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:19 Filter is already there-color wheel unchanged 06:59:19 Received message from Master: op=Shutter serial=268779 06:59:19 Shutter LASER close 06:59:19 Received message from Camera: op=State serial=268781 06:59:19 GetSingleValue result=40 Value=cccccccc 06:59:19 SkyScan query 06:59:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:20 Parameters OK 06:59:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:20 Set A/D data flow result=40 06:59:20 Set A/D channel type result=40 06:59:20 Set A/D encoding result=40 06:59:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:20 Set channel filter=0.000000e+000 result=40 06:59:20 Config A/D Result=40 06:59:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:20 Get A/D filter: -9.255963e+061 result=40 06:59:20 Get A/D value=-858993460 result=40 06:59:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:20 Parameters OK 06:59:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:20 Set A/D data flow result=40 06:59:20 Set A/D channel type result=40 06:59:20 Set A/D encoding result=40 06:59:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:20 Set channel filter=0.000000e+000 result=40 06:59:20 Config A/D Result=40 06:59:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:20 Get A/D filter: -9.255963e+061 result=40 06:59:20 Get A/D value=-858993460 result=40 06:59:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:20 Aux= 06:59:20 Message to Camera, serial 268781 queued 06:59:57 Received message from Master: op=PointingHead serial=268794 06:59:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 06:59:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 06:59:57 Point started: ret=0 06:59:57 point_skyscan result=0 06:59:58 Check angles 06:59:58 SkyScan query 06:59:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 06:59:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 06:59:58 Message to Master queued w/err=0: serial=268794 error=0 07:00:03 Received message from Master: op=Filter serial=268795 07:00:03 Color wheel filter change from 0 to 0 07:00:03 FLIGetFilterPos err=0 currentPosition=0 07:00:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:03 Filter is already there-color wheel unchanged 07:00:04 Received message from Master: op=Shutter serial=268796 07:00:04 Shutter LASER close 07:00:04 Received message from Camera: op=State serial=268798 07:00:04 GetSingleValue result=40 Value=cccccccc 07:00:04 SkyScan query 07:00:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:04 Parameters OK 07:00:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:04 Set A/D data flow result=40 07:00:04 Set A/D channel type result=40 07:00:04 Set A/D encoding result=40 07:00:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:04 Set channel filter=0.000000e+000 result=40 07:00:04 Config A/D Result=40 07:00:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:04 Get A/D filter: -9.255963e+061 result=40 07:00:04 Get A/D value=-858993460 result=40 07:00:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:04 Parameters OK 07:00:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:04 Set A/D data flow result=40 07:00:04 Set A/D channel type result=40 07:00:04 Set A/D encoding result=40 07:00:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:04 Set channel filter=0.000000e+000 result=40 07:00:04 Config A/D Result=40 07:00:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:04 Get A/D filter: -9.255963e+061 result=40 07:00:04 Get A/D value=-858993460 result=40 07:00:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:04 Aux= 07:00:04 Message to Camera, serial 268798 queued 07:00:40 Received message from Master: op=PointingHead serial=268810 07:00:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:00:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:00:40 Point started: ret=0 07:00:40 point_skyscan result=0 07:00:41 Check angles 07:00:41 SkyScan query 07:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:00:42 Message to Master queued w/err=0: serial=268810 error=0 07:00:47 Received message from Master: op=Filter serial=268811 07:00:47 Color wheel filter change from 0 to 0 07:00:47 FLIGetFilterPos err=0 currentPosition=0 07:00:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:47 Filter is already there-color wheel unchanged 07:00:47 Received message from Master: op=Shutter serial=268812 07:00:47 Shutter LASER close 07:00:47 Received message from Camera: op=State serial=268814 07:00:47 GetSingleValue result=40 Value=cccccccc 07:00:47 SkyScan query 07:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:00:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:48 Parameters OK 07:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:48 Set A/D data flow result=40 07:00:48 Set A/D channel type result=40 07:00:48 Set A/D encoding result=40 07:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:48 Set channel filter=0.000000e+000 result=40 07:00:48 Config A/D Result=40 07:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:48 Get A/D filter: -9.255963e+061 result=40 07:00:48 Get A/D value=-858993460 result=40 07:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:48 Parameters OK 07:00:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:48 Set A/D data flow result=40 07:00:48 Set A/D channel type result=40 07:00:48 Set A/D encoding result=40 07:00:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:48 Set channel filter=0.000000e+000 result=40 07:00:48 Config A/D Result=40 07:00:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:48 Get A/D filter: -9.255963e+061 result=40 07:00:48 Get A/D value=-858993460 result=40 07:00:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:48 Aux= 07:00:48 Message to Camera, serial 268814 queued 07:01:23 Received message from Master: op=PointingHead serial=268826 07:01:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:01:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:01:24 Point started: ret=0 07:01:24 point_skyscan result=0 07:01:25 Check angles 07:01:25 SkyScan query 07:01:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 07:01:25 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 07:01:25 Check angles 07:01:25 SkyScan query 07:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 07:01:26 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 07:01:26 Check angles 07:01:26 SkyScan query 07:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 07:01:27 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 07:01:27 Check angles 07:01:27 SkyScan query 07:01:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 07:01:27 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 07:01:28 Check angles 07:01:28 SkyScan query 07:01:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.97<-19198 Statuses=0008 0009 07:01:28 Msec=3000 True Az=112.995 Ze=-107.97 Az status=0008 Ze status=0009 07:01:28 Check angles 07:01:28 SkyScan query 07:01:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.36<-20624 Statuses=0008 0009 07:01:29 Msec=3750 True Az=112.995 Ze=-129.36 Az status=0008 Ze status=0009 07:01:29 Check angles 07:01:29 SkyScan query 07:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.675<-22045 Statuses=0008 0009 07:01:30 Msec=4500 True Az=112.995 Ze=-150.675 Az status=0008 Ze status=0009 07:01:30 Check angles 07:01:30 SkyScan query 07:01:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.705<-23447 Statuses=0008 0009 07:01:30 Msec=5250 True Az=112.995 Ze=-171.705 Az status=0008 Ze status=0009 07:01:31 Check angles 07:01:31 SkyScan query 07:01:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:01:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:01:31 Message to Master queued w/err=0: serial=268826 error=0 07:01:36 Received message from Master: op=Filter serial=268827 07:01:36 Color wheel filter change from 0 to 0 07:01:36 FLIGetFilterPos err=0 currentPosition=0 07:01:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:36 Filter is already there-color wheel unchanged 07:01:36 Received message from Master: op=Shutter serial=268828 07:01:36 Shutter LASER open 07:01:37 Received message from Camera: op=State serial=268830 07:01:37 GetSingleValue result=40 Value=cccccccc 07:01:37 SkyScan query 07:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:37 Parameters OK 07:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:37 Set A/D data flow result=40 07:01:37 Set A/D channel type result=40 07:01:37 Set A/D encoding result=40 07:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:37 Set channel filter=0.000000e+000 result=40 07:01:37 Config A/D Result=40 07:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:37 Get A/D filter: -9.255963e+061 result=40 07:01:37 Get A/D value=-858993460 result=40 07:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:37 Parameters OK 07:01:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:37 Set A/D data flow result=40 07:01:37 Set A/D channel type result=40 07:01:37 Set A/D encoding result=40 07:01:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:37 Set channel filter=0.000000e+000 result=40 07:01:37 Config A/D Result=40 07:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:37 Get A/D filter: -9.255963e+061 result=40 07:01:37 Get A/D value=-858993460 result=40 07:01:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:37 Aux= 07:01:37 Message to Camera, serial 268830 queued 07:01:46 Received message from Master: op=Shutter serial=268840 07:01:46 Shutter LASER close 07:01:46 Received message from Master: op=PointingHead serial=268844 07:01:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:01:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:01:47 Point started: ret=0 07:01:47 point_skyscan result=0 07:01:47 Check angles 07:01:47 SkyScan query 07:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 07:01:48 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 07:01:48 Check angles 07:01:48 SkyScan query 07:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 07:01:49 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 07:01:49 Check angles 07:01:49 SkyScan query 07:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 07:01:49 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 07:01:50 Check angles 07:01:50 SkyScan query 07:01:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 07:01:50 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 07:01:50 Check angles 07:01:50 SkyScan query 07:01:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 07:01:51 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 07:01:51 Check angles 07:01:51 SkyScan query 07:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 07:01:52 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 07:01:52 Check angles 07:01:52 SkyScan query 07:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 07:01:52 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 07:01:53 Check angles 07:01:53 SkyScan query 07:01:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 07:01:53 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 07:01:53 Check angles 07:01:53 SkyScan query 07:01:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:01:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:01:54 Message to Master queued w/err=0: serial=268844 error=0 07:01:59 Received message from Master: op=Filter serial=268845 07:01:59 Color wheel filter change from 0 to 0 07:01:59 FLIGetFilterPos err=0 currentPosition=0 07:01:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:59 Filter is already there-color wheel unchanged 07:01:59 Received message from Master: op=Shutter serial=268846 07:01:59 Shutter LASER close 07:01:59 Received message from Camera: op=State serial=268848 07:01:59 GetSingleValue result=40 Value=cccccccc 07:01:59 SkyScan query 07:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:00 Parameters OK 07:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:00 Set A/D data flow result=40 07:02:00 Set A/D channel type result=40 07:02:00 Set A/D encoding result=40 07:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:00 Set channel filter=0.000000e+000 result=40 07:02:00 Config A/D Result=40 07:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:00 Get A/D filter: -9.255963e+061 result=40 07:02:00 Get A/D value=-858993460 result=40 07:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:00 Parameters OK 07:02:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:00 Set A/D data flow result=40 07:02:00 Set A/D channel type result=40 07:02:00 Set A/D encoding result=40 07:02:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:00 Set channel filter=0.000000e+000 result=40 07:02:00 Config A/D Result=40 07:02:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:00 Get A/D filter: -9.255963e+061 result=40 07:02:00 Get A/D value=-858993460 result=40 07:02:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:00 Aux= 07:02:00 Message to Camera, serial 268848 queued 07:02:37 Received message from Master: op=PointingHead serial=268861 07:02:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:02:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:02:37 Point started: ret=0 07:02:37 point_skyscan result=0 07:02:38 Check angles 07:02:38 SkyScan query 07:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:02:38 Message to Master queued w/err=0: serial=268861 error=0 07:02:43 Received message from Master: op=Filter serial=268862 07:02:43 Color wheel filter change from 0 to 0 07:02:43 FLIGetFilterPos err=0 currentPosition=0 07:02:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:43 Filter is already there-color wheel unchanged 07:02:43 Received message from Master: op=Shutter serial=268863 07:02:43 Shutter LASER close 07:02:44 Received message from Camera: op=State serial=268865 07:02:44 GetSingleValue result=40 Value=cccccccc 07:02:44 SkyScan query 07:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:02:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:44 Parameters OK 07:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:44 Set A/D data flow result=40 07:02:44 Set A/D channel type result=40 07:02:44 Set A/D encoding result=40 07:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:44 Set channel filter=0.000000e+000 result=40 07:02:44 Config A/D Result=40 07:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:44 Get A/D filter: -9.255963e+061 result=40 07:02:44 Get A/D value=-858993460 result=40 07:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:44 Parameters OK 07:02:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:44 Set A/D data flow result=40 07:02:44 Set A/D channel type result=40 07:02:44 Set A/D encoding result=40 07:02:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:44 Set channel filter=0.000000e+000 result=40 07:02:44 Config A/D Result=40 07:02:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:44 Get A/D filter: -9.255963e+061 result=40 07:02:44 Get A/D value=-858993460 result=40 07:02:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:44 Aux= 07:02:44 Message to Camera, serial 268865 queued 07:03:21 Received message from Master: op=PointingHead serial=268878 07:03:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:03:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:03:21 Point started: ret=0 07:03:21 point_skyscan result=0 07:03:22 Check angles 07:03:22 SkyScan query 07:03:23 SkyScan query done: ret=0 az=135.945<-9063 ze=-6.51<-12434 Statuses=0009 0008 07:03:23 Msec=0 True Az=135.945 Ze=-6.51 Az status=0009 Ze status=0008 07:03:23 Check angles 07:03:23 SkyScan query 07:03:23 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 07:03:23 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 07:03:24 Check angles 07:03:24 SkyScan query 07:03:24 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 07:03:24 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 07:03:24 Check angles 07:03:24 SkyScan query 07:03:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:03:25 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:03:25 Message to Master queued w/err=0: serial=268878 error=0 07:03:30 Received message from Master: op=Filter serial=268879 07:03:30 Color wheel filter change from 0 to 0 07:03:30 FLIGetFilterPos err=0 currentPosition=0 07:03:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:30 Filter is already there-color wheel unchanged 07:03:30 Received message from Master: op=Shutter serial=268880 07:03:30 Shutter LASER close 07:03:30 Received message from Camera: op=State serial=268882 07:03:30 GetSingleValue result=40 Value=cccccccc 07:03:30 SkyScan query 07:03:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:03:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:31 Parameters OK 07:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:31 Set A/D data flow result=40 07:03:31 Set A/D channel type result=40 07:03:31 Set A/D encoding result=40 07:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:31 Set channel filter=0.000000e+000 result=40 07:03:31 Config A/D Result=40 07:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:31 Get A/D filter: -9.255963e+061 result=40 07:03:31 Get A/D value=-858993460 result=40 07:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:31 Parameters OK 07:03:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:31 Set A/D data flow result=40 07:03:31 Set A/D channel type result=40 07:03:31 Set A/D encoding result=40 07:03:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:31 Set channel filter=0.000000e+000 result=40 07:03:31 Config A/D Result=40 07:03:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:31 Get A/D filter: -9.255963e+061 result=40 07:03:31 Get A/D value=-858993460 result=40 07:03:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:31 Aux= 07:03:31 Message to Camera, serial 268882 queued 07:03:35 Received message from Master: op=Identify serial=268883 [UTC 2019-3-14 07:03:48] 07:04:07 Received message from Master: op=PointingHead serial=268898 07:04:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:04:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:04:08 Point started: ret=0 07:04:08 point_skyscan result=0 07:04:09 Check angles 07:04:09 SkyScan query 07:04:09 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 07:04:09 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 07:04:09 Check angles 07:04:09 SkyScan query 07:04:10 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 07:04:10 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 07:04:10 Check angles 07:04:10 SkyScan query 07:04:11 SkyScan query done: ret=0 az=117.57<-7838 ze=6.495<-11567 Statuses=0009 0008 07:04:11 Msec=1500 True Az=117.57 Ze=6.495 Az status=0009 Ze status=0008 07:04:11 Check angles 07:04:11 SkyScan query 07:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:04:11 Message to Master queued w/err=0: serial=268898 error=0 07:04:16 Received message from Master: op=Filter serial=268899 07:04:16 Color wheel filter change from 0 to 0 07:04:16 FLIGetFilterPos err=0 currentPosition=0 07:04:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:16 Filter is already there-color wheel unchanged 07:04:17 Received message from Master: op=Shutter serial=268900 07:04:17 Shutter LASER close 07:04:17 Received message from Camera: op=State serial=268902 07:04:17 GetSingleValue result=40 Value=cccccccc 07:04:17 SkyScan query 07:04:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:17 Parameters OK 07:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:17 Set A/D data flow result=40 07:04:17 Set A/D channel type result=40 07:04:17 Set A/D encoding result=40 07:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:17 Set channel filter=0.000000e+000 result=40 07:04:17 Config A/D Result=40 07:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:17 Get A/D filter: -9.255963e+061 result=40 07:04:17 Get A/D value=-858993460 result=40 07:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:17 Parameters OK 07:04:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:17 Set A/D data flow result=40 07:04:17 Set A/D channel type result=40 07:04:17 Set A/D encoding result=40 07:04:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:17 Set channel filter=0.000000e+000 result=40 07:04:17 Config A/D Result=40 07:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:17 Get A/D filter: -9.255963e+061 result=40 07:04:17 Get A/D value=-858993460 result=40 07:04:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:17 Aux= 07:04:17 Message to Camera, serial 268902 queued 07:04:54 Received message from Master: op=PointingHead serial=268915 07:04:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:04:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:04:54 Point started: ret=0 07:04:54 point_skyscan result=0 07:04:55 Check angles 07:04:55 SkyScan query 07:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 07:04:56 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 07:04:56 Check angles 07:04:56 SkyScan query 07:04:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 07:04:56 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 07:04:57 Check angles 07:04:57 SkyScan query 07:04:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 07:04:57 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 07:04:57 Check angles 07:04:57 SkyScan query 07:04:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 07:04:58 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 07:04:58 Check angles 07:04:58 SkyScan query 07:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 07:04:59 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 07:04:59 Check angles 07:04:59 SkyScan query 07:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 07:04:59 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 07:05:00 Check angles 07:05:00 SkyScan query 07:05:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.57<-22038 Statuses=0008 0009 07:05:00 Msec=4500 True Az=112.995 Ze=-150.57 Az status=0008 Ze status=0009 07:05:00 Check angles 07:05:00 SkyScan query 07:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0008 0009 07:05:01 Msec=5250 True Az=112.995 Ze=-171.3 Az status=0008 Ze status=0009 07:05:01 Check angles 07:05:01 SkyScan query 07:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:05:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:05:02 Message to Master queued w/err=0: serial=268915 error=0 07:05:07 Received message from Master: op=Filter serial=268916 07:05:07 Color wheel filter change from 0 to 0 07:05:07 FLIGetFilterPos err=0 currentPosition=0 07:05:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:07 Filter is already there-color wheel unchanged 07:05:07 Received message from Master: op=Shutter serial=268917 07:05:07 Shutter LASER open 07:05:07 Received message from Camera: op=State serial=268919 07:05:07 GetSingleValue result=40 Value=cccccccc 07:05:07 SkyScan query 07:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:08 Parameters OK 07:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:08 Set A/D data flow result=40 07:05:08 Set A/D channel type result=40 07:05:08 Set A/D encoding result=40 07:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:08 Set channel filter=0.000000e+000 result=40 07:05:08 Config A/D Result=40 07:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:08 Get A/D filter: -9.255963e+061 result=40 07:05:08 Get A/D value=-858993460 result=40 07:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:08 Parameters OK 07:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:08 Set A/D data flow result=40 07:05:08 Set A/D channel type result=40 07:05:08 Set A/D encoding result=40 07:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:08 Set channel filter=0.000000e+000 result=40 07:05:08 Config A/D Result=40 07:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:08 Get A/D filter: -9.255963e+061 result=40 07:05:08 Get A/D value=-858993460 result=40 07:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:08 Aux= 07:05:08 Message to Camera, serial 268919 queued 07:05:16 Received message from Master: op=Shutter serial=268929 07:05:16 Shutter LASER close 07:05:17 Received message from Master: op=PointingHead serial=268933 07:05:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:05:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:05:17 Point started: ret=0 07:05:17 point_skyscan result=0 07:05:18 Check angles 07:05:18 SkyScan query 07:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.86<-21524 Statuses=0008 0009 07:05:18 Msec=0 True Az=112.995 Ze=-142.86 Az status=0008 Ze status=0009 07:05:18 Check angles 07:05:18 SkyScan query 07:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 07:05:19 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 07:05:19 Check angles 07:05:19 SkyScan query 07:05:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 07:05:20 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 07:05:20 Check angles 07:05:20 SkyScan query 07:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 07:05:21 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 07:05:21 Check angles 07:05:21 SkyScan query 07:05:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 07:05:21 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 07:05:21 Check angles 07:05:21 SkyScan query 07:05:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 07:05:22 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 07:05:22 Check angles 07:05:22 SkyScan query 07:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 07:05:23 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 07:05:23 Check angles 07:05:23 SkyScan query 07:05:24 SkyScan query done: ret=0 az=113.01<-7534 ze=4.26<-11716 Statuses=0008 0009 07:05:24 Msec=5250 True Az=113.01 Ze=4.26 Az status=0008 Ze status=0009 07:05:24 Check angles 07:05:24 SkyScan query 07:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:05:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:05:24 Message to Master queued w/err=0: serial=268933 error=0 07:05:29 Received message from Master: op=Filter serial=268934 07:05:29 Color wheel filter change from 0 to 0 07:05:29 FLIGetFilterPos err=0 currentPosition=0 07:05:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:29 Filter is already there-color wheel unchanged 07:05:29 Received message from Master: op=Shutter serial=268935 07:05:29 Shutter LASER close 07:05:30 Received message from Camera: op=State serial=268937 07:05:30 GetSingleValue result=40 Value=cccccccc 07:05:30 SkyScan query 07:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:05:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:30 Parameters OK 07:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:30 Set A/D data flow result=40 07:05:30 Set A/D channel type result=40 07:05:30 Set A/D encoding result=40 07:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:30 Set channel filter=0.000000e+000 result=40 07:05:30 Config A/D Result=40 07:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:30 Get A/D filter: -9.255963e+061 result=40 07:05:30 Get A/D value=-858993460 result=40 07:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:30 Parameters OK 07:05:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:30 Set A/D data flow result=40 07:05:30 Set A/D channel type result=40 07:05:30 Set A/D encoding result=40 07:05:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:30 Set channel filter=0.000000e+000 result=40 07:05:30 Config A/D Result=40 07:05:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:30 Get A/D filter: -9.255963e+061 result=40 07:05:30 Get A/D value=-858993460 result=40 07:05:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:30 Aux= 07:05:30 Message to Camera, serial 268937 queued 07:06:07 Received message from Master: op=PointingHead serial=268950 07:06:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:07 Point started: ret=0 07:06:07 point_skyscan result=0 07:06:08 Check angles 07:06:08 SkyScan query 07:06:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:09 Message to Master queued w/err=0: serial=268950 error=0 07:06:14 Received message from Master: op=Filter serial=268951 07:06:14 Color wheel filter change from 0 to 0 07:06:14 FLIGetFilterPos err=0 currentPosition=0 07:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:14 Filter is already there-color wheel unchanged 07:06:14 Received message from Master: op=Shutter serial=268952 07:06:14 Shutter LASER close 07:06:14 Received message from Camera: op=State serial=268954 07:06:14 GetSingleValue result=40 Value=cccccccc 07:06:14 SkyScan query 07:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:14 Parameters OK 07:06:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:14 Set A/D data flow result=40 07:06:14 Set A/D channel type result=40 07:06:14 Set A/D encoding result=40 07:06:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:14 Set channel filter=0.000000e+000 result=40 07:06:14 Config A/D Result=40 07:06:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:14 Get A/D filter: -9.255963e+061 result=40 07:06:14 Get A/D value=-858993460 result=40 07:06:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:14 Parameters OK 07:06:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:14 Set A/D data flow result=40 07:06:14 Set A/D channel type result=40 07:06:14 Set A/D encoding result=40 07:06:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:14 Set channel filter=0.000000e+000 result=40 07:06:14 Config A/D Result=40 07:06:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:14 Get A/D filter: -9.255963e+061 result=40 07:06:14 Get A/D value=-858993460 result=40 07:06:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:14 Aux= 07:06:14 Message to Camera, serial 268954 queued 07:06:51 Received message from Master: op=PointingHead serial=268967 07:06:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:06:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:06:52 Point started: ret=0 07:06:52 point_skyscan result=0 07:06:52 Check angles 07:06:52 SkyScan query 07:06:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:06:53 Message to Master queued w/err=0: serial=268967 error=0 07:06:58 Received message from Master: op=Filter serial=268968 07:06:58 Color wheel filter change from 0 to 0 07:06:58 FLIGetFilterPos err=0 currentPosition=0 07:06:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:58 Filter is already there-color wheel unchanged 07:06:58 Received message from Master: op=Shutter serial=268969 07:06:58 Shutter LASER close 07:06:58 Received message from Camera: op=State serial=268971 07:06:58 GetSingleValue result=40 Value=cccccccc 07:06:58 SkyScan query 07:06:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:06:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:59 Parameters OK 07:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:59 Set A/D data flow result=40 07:06:59 Set A/D channel type result=40 07:06:59 Set A/D encoding result=40 07:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:59 Set channel filter=0.000000e+000 result=40 07:06:59 Config A/D Result=40 07:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:59 Get A/D filter: -9.255963e+061 result=40 07:06:59 Get A/D value=-858993460 result=40 07:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:59 Parameters OK 07:06:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:59 Set A/D data flow result=40 07:06:59 Set A/D channel type result=40 07:06:59 Set A/D encoding result=40 07:06:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:59 Set channel filter=0.000000e+000 result=40 07:06:59 Config A/D Result=40 07:06:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:59 Get A/D filter: -9.255963e+061 result=40 07:06:59 Get A/D value=-858993460 result=40 07:06:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:59 Aux= 07:06:59 Message to Camera, serial 268971 queued 07:07:36 Received message from Master: op=PointingHead serial=268984 07:07:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:07:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:07:36 Point started: ret=0 07:07:36 point_skyscan result=0 07:07:37 Check angles 07:07:37 SkyScan query 07:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:07:37 Message to Master queued w/err=0: serial=268984 error=0 07:07:42 Received message from Master: op=Filter serial=268985 07:07:42 Color wheel filter change from 0 to 0 07:07:42 FLIGetFilterPos err=0 currentPosition=0 07:07:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:42 Filter is already there-color wheel unchanged 07:07:43 Received message from Master: op=Shutter serial=268986 07:07:43 Shutter LASER close 07:07:43 Received message from Camera: op=State serial=268988 07:07:43 GetSingleValue result=40 Value=cccccccc 07:07:43 SkyScan query 07:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:07:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:43 Parameters OK 07:07:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:43 Set A/D data flow result=40 07:07:43 Set A/D channel type result=40 07:07:43 Set A/D encoding result=40 07:07:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:43 Set channel filter=0.000000e+000 result=40 07:07:43 Config A/D Result=40 07:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:43 Get A/D filter: -9.255963e+061 result=40 07:07:43 Get A/D value=-858993460 result=40 07:07:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:43 Parameters OK 07:07:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:43 Set A/D data flow result=40 07:07:43 Set A/D channel type result=40 07:07:43 Set A/D encoding result=40 07:07:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:43 Set channel filter=0.000000e+000 result=40 07:07:43 Config A/D Result=40 07:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:43 Get A/D filter: -9.255963e+061 result=40 07:07:43 Get A/D value=-858993460 result=40 07:07:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:43 Aux= 07:07:43 Message to Camera, serial 268988 queued 07:08:20 Received message from Master: op=PointingHead serial=269001 07:08:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:20 Point started: ret=0 07:08:20 point_skyscan result=0 07:08:21 Check angles 07:08:21 SkyScan query 07:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 07:08:22 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 07:08:22 Check angles 07:08:22 SkyScan query 07:08:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 07:08:22 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 07:08:23 Check angles 07:08:23 SkyScan query 07:08:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 07:08:23 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 07:08:23 Check angles 07:08:23 SkyScan query 07:08:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 07:08:24 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 07:08:24 Check angles 07:08:24 SkyScan query 07:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.085<-19139 Statuses=0008 0009 07:08:25 Msec=3000 True Az=112.995 Ze=-107.085 Az status=0008 Ze status=0009 07:08:25 Check angles 07:08:25 SkyScan query 07:08:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.055<-20537 Statuses=0008 0009 07:08:25 Msec=3750 True Az=112.995 Ze=-128.055 Az status=0008 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.01<-21934 Statuses=0008 0009 07:08:26 Msec=4500 True Az=112.995 Ze=-149.01 Az status=0008 Ze status=0009 07:08:26 Check angles 07:08:26 SkyScan query 07:08:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.95<-23330 Statuses=0008 0009 07:08:27 Msec=5250 True Az=112.995 Ze=-169.95 Az status=0008 Ze status=0009 07:08:27 Check angles 07:08:27 SkyScan query 07:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:08:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:08:28 Message to Master queued w/err=0: serial=269001 error=0 07:08:33 Received message from Master: op=Filter serial=269002 07:08:33 Color wheel filter change from 0 to 0 07:08:33 FLIGetFilterPos err=0 currentPosition=0 07:08:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:33 Filter is already there-color wheel unchanged 07:08:33 Received message from Master: op=Shutter serial=269003 07:08:33 Shutter LASER open 07:08:33 Received message from Camera: op=State serial=269005 07:08:33 GetSingleValue result=40 Value=cccccccc 07:08:33 SkyScan query 07:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:08:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:34 Parameters OK 07:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:34 Set A/D data flow result=40 07:08:34 Set A/D channel type result=40 07:08:34 Set A/D encoding result=40 07:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:34 Set channel filter=0.000000e+000 result=40 07:08:34 Config A/D Result=40 07:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:34 Get A/D filter: -9.255963e+061 result=40 07:08:34 Get A/D value=-858993460 result=40 07:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:34 Parameters OK 07:08:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:34 Set A/D data flow result=40 07:08:34 Set A/D channel type result=40 07:08:34 Set A/D encoding result=40 07:08:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:34 Set channel filter=0.000000e+000 result=40 07:08:34 Config A/D Result=40 07:08:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:34 Get A/D filter: -9.255963e+061 result=40 07:08:34 Get A/D value=-858993460 result=40 07:08:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:34 Aux= 07:08:34 Message to Camera, serial 269005 queued 07:08:42 Received message from Master: op=Shutter serial=269015 07:08:42 Shutter LASER close 07:08:43 Received message from Master: op=PointingHead serial=269019 07:08:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:08:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:08:43 Point started: ret=0 07:08:43 point_skyscan result=0 07:08:44 Check angles 07:08:44 SkyScan query 07:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 07:08:44 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 07:08:44 Check angles 07:08:44 SkyScan query 07:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 07:08:45 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 07:08:45 Check angles 07:08:45 SkyScan query 07:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 07:08:46 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 07:08:46 Check angles 07:08:46 SkyScan query 07:08:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.235<-17349 Statuses=0008 0009 07:08:46 Msec=2250 True Az=112.995 Ze=-80.235 Az status=0008 Ze status=0009 07:08:47 Check angles 07:08:47 SkyScan query 07:08:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 07:08:47 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 07:08:47 Check angles 07:08:47 SkyScan query 07:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 07:08:48 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 07:08:48 Check angles 07:08:48 SkyScan query 07:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 07:08:49 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 07:08:49 Check angles 07:08:49 SkyScan query 07:08:49 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 07:08:49 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 07:08:50 Check angles 07:08:50 SkyScan query 07:08:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:08:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:08:50 Message to Master queued w/err=0: serial=269019 error=0 07:08:55 Received message from Master: op=Filter serial=269020 07:08:55 Color wheel filter change from 0 to 0 07:08:55 FLIGetFilterPos err=0 currentPosition=0 07:08:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:55 Filter is already there-color wheel unchanged 07:08:55 Received message from Master: op=Shutter serial=269021 07:08:55 Shutter LASER close 07:08:56 Received message from Camera: op=State serial=269023 07:08:56 GetSingleValue result=40 Value=cccccccc 07:08:56 SkyScan query 07:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:08:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:56 Parameters OK 07:08:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:56 Set A/D data flow result=40 07:08:56 Set A/D channel type result=40 07:08:56 Set A/D encoding result=40 07:08:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:56 Set channel filter=0.000000e+000 result=40 07:08:56 Config A/D Result=40 07:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:56 Get A/D filter: -9.255963e+061 result=40 07:08:56 Get A/D value=-858993460 result=40 07:08:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:56 Parameters OK 07:08:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:56 Set A/D data flow result=40 07:08:56 Set A/D channel type result=40 07:08:56 Set A/D encoding result=40 07:08:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:56 Set channel filter=0.000000e+000 result=40 07:08:56 Config A/D Result=40 07:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:56 Get A/D filter: -9.255963e+061 result=40 07:08:56 Get A/D value=-858993460 result=40 07:08:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:56 Aux= 07:08:56 Message to Camera, serial 269023 queued 07:09:33 Received message from Master: op=PointingHead serial=269036 07:09:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:09:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:09:33 Point started: ret=0 07:09:33 point_skyscan result=0 07:09:34 Check angles 07:09:34 SkyScan query 07:09:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:09:35 Message to Master queued w/err=0: serial=269036 error=0 07:09:40 Received message from Master: op=Filter serial=269037 07:09:40 Color wheel filter change from 0 to 0 07:09:40 FLIGetFilterPos err=0 currentPosition=0 07:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:40 Filter is already there-color wheel unchanged 07:09:40 Received message from Master: op=Shutter serial=269038 07:09:40 Shutter LASER close 07:09:40 Received message from Camera: op=State serial=269040 07:09:40 GetSingleValue result=40 Value=cccccccc 07:09:40 SkyScan query 07:09:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:09:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:41 Parameters OK 07:09:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:41 Set A/D data flow result=40 07:09:41 Set A/D channel type result=40 07:09:41 Set A/D encoding result=40 07:09:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:41 Set channel filter=0.000000e+000 result=40 07:09:41 Config A/D Result=40 07:09:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:41 Get A/D filter: -9.255963e+061 result=40 07:09:41 Get A/D value=-858993460 result=40 07:09:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:41 Parameters OK 07:09:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:41 Set A/D data flow result=40 07:09:41 Set A/D channel type result=40 07:09:41 Set A/D encoding result=40 07:09:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:41 Set channel filter=0.000000e+000 result=40 07:09:41 Config A/D Result=40 07:09:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:41 Get A/D filter: -9.255963e+061 result=40 07:09:41 Get A/D value=-858993460 result=40 07:09:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:41 Aux= 07:09:41 Message to Camera, serial 269040 queued 07:10:17 Received message from Master: op=PointingHead serial=269053 07:10:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:10:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:10:18 Point started: ret=0 07:10:18 point_skyscan result=0 07:10:19 Check angles 07:10:19 SkyScan query 07:10:19 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 07:10:19 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 07:10:19 Check angles 07:10:19 SkyScan query 07:10:20 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 07:10:20 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 07:10:20 Check angles 07:10:20 SkyScan query 07:10:21 SkyScan query done: ret=0 az=171.42<-11428 ze=-6.495<-12433 Statuses=0009 0008 07:10:21 Msec=1500 True Az=171.42 Ze=-6.495 Az status=0009 Ze status=0008 07:10:21 Check angles 07:10:21 SkyScan query 07:10:21 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:10:21 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:10:21 Message to Master queued w/err=0: serial=269053 error=0 07:10:26 Received message from Master: op=Filter serial=269054 07:10:26 Color wheel filter change from 0 to 0 07:10:26 FLIGetFilterPos err=0 currentPosition=0 07:10:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:26 Filter is already there-color wheel unchanged 07:10:27 Received message from Master: op=Shutter serial=269055 07:10:27 Shutter LASER close 07:10:27 Received message from Camera: op=State serial=269057 07:10:27 GetSingleValue result=40 Value=cccccccc 07:10:27 SkyScan query 07:10:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:10:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:27 Parameters OK 07:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:27 Set A/D data flow result=40 07:10:27 Set A/D channel type result=40 07:10:27 Set A/D encoding result=40 07:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:27 Set channel filter=0.000000e+000 result=40 07:10:27 Config A/D Result=40 07:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:27 Get A/D filter: -9.255963e+061 result=40 07:10:27 Get A/D value=-858993460 result=40 07:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:27 Parameters OK 07:10:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:27 Set A/D data flow result=40 07:10:27 Set A/D channel type result=40 07:10:27 Set A/D encoding result=40 07:10:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:27 Set channel filter=0.000000e+000 result=40 07:10:27 Config A/D Result=40 07:10:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:27 Get A/D filter: -9.255963e+061 result=40 07:10:27 Get A/D value=-858993460 result=40 07:10:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:27 Aux= 07:10:27 Message to Camera, serial 269057 queued 07:11:04 Received message from Master: op=PointingHead serial=269070 07:11:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:11:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:11:04 Point started: ret=0 07:11:04 point_skyscan result=0 07:11:05 Check angles 07:11:05 SkyScan query 07:11:06 SkyScan query done: ret=0 az=152.46<-10164 ze=6.51<-11566 Statuses=0009 0008 07:11:06 Msec=0 True Az=152.46 Ze=6.51 Az status=0009 Ze status=0008 07:11:06 Check angles 07:11:06 SkyScan query 07:11:06 SkyScan query done: ret=0 az=134.67<-8978 ze=6.495<-11567 Statuses=0009 0008 07:11:06 Msec=750 True Az=134.67 Ze=6.495 Az status=0009 Ze status=0008 07:11:07 Check angles 07:11:07 SkyScan query 07:11:07 SkyScan query done: ret=0 az=117.195<-7813 ze=6.495<-11567 Statuses=0009 0008 07:11:07 Msec=1500 True Az=117.195 Ze=6.495 Az status=0009 Ze status=0008 07:11:07 Check angles 07:11:07 SkyScan query 07:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:08 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:11:08 Message to Master queued w/err=0: serial=269070 error=0 07:11:13 Received message from Master: op=Filter serial=269071 07:11:13 Color wheel filter change from 0 to 0 07:11:13 FLIGetFilterPos err=0 currentPosition=0 07:11:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:13 Filter is already there-color wheel unchanged 07:11:13 Received message from Master: op=Shutter serial=269072 07:11:13 Shutter LASER close 07:11:13 Received message from Camera: op=State serial=269074 07:11:13 GetSingleValue result=40 Value=cccccccc 07:11:13 SkyScan query 07:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:11:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:14 Parameters OK 07:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:14 Set A/D data flow result=40 07:11:14 Set A/D channel type result=40 07:11:14 Set A/D encoding result=40 07:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:14 Set channel filter=0.000000e+000 result=40 07:11:14 Config A/D Result=40 07:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:14 Get A/D filter: -9.255963e+061 result=40 07:11:14 Get A/D value=-858993460 result=40 07:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:14 Parameters OK 07:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:14 Set A/D data flow result=40 07:11:14 Set A/D channel type result=40 07:11:14 Set A/D encoding result=40 07:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:14 Set channel filter=0.000000e+000 result=40 07:11:14 Config A/D Result=40 07:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:14 Get A/D filter: -9.255963e+061 result=40 07:11:14 Get A/D value=-858993460 result=40 07:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:14 Aux= 07:11:14 Message to Camera, serial 269074 queued 07:11:51 Received message from Master: op=PointingHead serial=269087 07:11:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:11:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:11:51 Point started: ret=0 07:11:51 point_skyscan result=0 07:11:52 Check angles 07:11:52 SkyScan query 07:11:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 07:11:52 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 07:11:52 Check angles 07:11:52 SkyScan query 07:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 07:11:53 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 07:11:53 Check angles 07:11:53 SkyScan query 07:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 07:11:54 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 07:11:54 Check angles 07:11:54 SkyScan query 07:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 07:11:54 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 07:11:55 Check angles 07:11:55 SkyScan query 07:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.565<-19171 Statuses=0008 0009 07:11:55 Msec=3000 True Az=112.995 Ze=-107.565 Az status=0008 Ze status=0009 07:11:55 Check angles 07:11:55 SkyScan query 07:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 07:11:56 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 07:11:56 Check angles 07:11:56 SkyScan query 07:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 07:11:57 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 07:11:57 Check angles 07:11:57 SkyScan query 07:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.43<-23362 Statuses=0008 0009 07:11:57 Msec=5250 True Az=112.995 Ze=-170.43 Az status=0008 Ze status=0009 07:11:58 Check angles 07:11:58 SkyScan query 07:11:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:11:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:11:58 Message to Master queued w/err=0: serial=269087 error=0 07:12:03 Received message from Master: op=Filter serial=269088 07:12:03 Color wheel filter change from 0 to 0 07:12:03 FLIGetFilterPos err=0 currentPosition=0 07:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:03 Filter is already there-color wheel unchanged 07:12:03 Received message from Master: op=Shutter serial=269089 07:12:03 Shutter LASER open 07:12:04 Received message from Camera: op=State serial=269091 07:12:04 GetSingleValue result=40 Value=cccccccc 07:12:04 SkyScan query 07:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:04 Parameters OK 07:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:04 Set A/D data flow result=40 07:12:04 Set A/D channel type result=40 07:12:04 Set A/D encoding result=40 07:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:04 Set channel filter=0.000000e+000 result=40 07:12:04 Config A/D Result=40 07:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:04 Get A/D filter: -9.255963e+061 result=40 07:12:04 Get A/D value=-858993460 result=40 07:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:04 Parameters OK 07:12:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:04 Set A/D data flow result=40 07:12:04 Set A/D channel type result=40 07:12:04 Set A/D encoding result=40 07:12:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:04 Set channel filter=0.000000e+000 result=40 07:12:04 Config A/D Result=40 07:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:04 Get A/D filter: -9.255963e+061 result=40 07:12:04 Get A/D value=-858993460 result=40 07:12:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:04 Aux= 07:12:04 Message to Camera, serial 269091 queued 07:12:13 Received message from Master: op=Shutter serial=269101 07:12:13 Shutter LASER close 07:12:13 Received message from Master: op=PointingHead serial=269105 07:12:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:12:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:12:13 Point started: ret=0 07:12:13 point_skyscan result=0 07:12:14 Check angles 07:12:14 SkyScan query 07:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 07:12:15 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 07:12:15 Check angles 07:12:15 SkyScan query 07:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 07:12:15 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 07:12:16 Check angles 07:12:16 SkyScan query 07:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 07:12:16 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 07:12:16 Check angles 07:12:16 SkyScan query 07:12:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 07:12:17 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 07:12:17 Check angles 07:12:17 SkyScan query 07:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.14<-15876 Statuses=0008 0009 07:12:18 Msec=3000 True Az=112.995 Ze=-58.14 Az status=0008 Ze status=0009 07:12:18 Check angles 07:12:18 SkyScan query 07:12:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.23<-14482 Statuses=0008 0009 07:12:18 Msec=3750 True Az=112.995 Ze=-37.23 Az status=0008 Ze status=0009 07:12:19 Check angles 07:12:19 SkyScan query 07:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.245<-13083 Statuses=0008 0009 07:12:19 Msec=4500 True Az=112.995 Ze=-16.245 Az status=0008 Ze status=0009 07:12:19 Check angles 07:12:19 SkyScan query 07:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 07:12:20 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 07:12:20 Check angles 07:12:20 SkyScan query 07:12:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:12:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:12:21 Message to Master queued w/err=0: serial=269105 error=0 07:12:26 Received message from Master: op=Filter serial=269106 07:12:26 Color wheel filter change from 0 to 0 07:12:26 FLIGetFilterPos err=0 currentPosition=0 07:12:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:26 Filter is already there-color wheel unchanged 07:12:26 Received message from Master: op=Shutter serial=269107 07:12:26 Shutter LASER close 07:12:26 Received message from Camera: op=State serial=269109 07:12:26 GetSingleValue result=40 Value=cccccccc 07:12:26 SkyScan query 07:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:12:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:27 Parameters OK 07:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:27 Set A/D data flow result=40 07:12:27 Set A/D channel type result=40 07:12:27 Set A/D encoding result=40 07:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:27 Set channel filter=0.000000e+000 result=40 07:12:27 Config A/D Result=40 07:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:27 Get A/D filter: -9.255963e+061 result=40 07:12:27 Get A/D value=-858993460 result=40 07:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:27 Parameters OK 07:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:27 Set A/D data flow result=40 07:12:27 Set A/D channel type result=40 07:12:27 Set A/D encoding result=40 07:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:27 Set channel filter=0.000000e+000 result=40 07:12:27 Config A/D Result=40 07:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:27 Get A/D filter: -9.255963e+061 result=40 07:12:27 Get A/D value=-858993460 result=40 07:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:27 Aux= 07:12:27 Message to Camera, serial 269109 queued 07:13:04 Received message from Master: op=PointingHead serial=269122 07:13:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:04 Point started: ret=0 07:13:04 point_skyscan result=0 07:13:05 Check angles 07:13:05 SkyScan query 07:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:05 Message to Master queued w/err=0: serial=269122 error=0 07:13:10 Received message from Master: op=Filter serial=269123 07:13:10 Color wheel filter change from 0 to 0 07:13:10 FLIGetFilterPos err=0 currentPosition=0 07:13:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:10 Filter is already there-color wheel unchanged 07:13:10 Received message from Master: op=Shutter serial=269124 07:13:10 Shutter LASER close 07:13:10 Received message from Camera: op=State serial=269126 07:13:10 GetSingleValue result=40 Value=cccccccc 07:13:10 SkyScan query 07:13:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:11 Parameters OK 07:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:11 Set A/D data flow result=40 07:13:11 Set A/D channel type result=40 07:13:11 Set A/D encoding result=40 07:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:11 Set channel filter=0.000000e+000 result=40 07:13:11 Config A/D Result=40 07:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:11 Get A/D filter: -9.255963e+061 result=40 07:13:11 Get A/D value=-858993460 result=40 07:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:11 Parameters OK 07:13:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:11 Set A/D data flow result=40 07:13:11 Set A/D channel type result=40 07:13:11 Set A/D encoding result=40 07:13:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:11 Set channel filter=0.000000e+000 result=40 07:13:11 Config A/D Result=40 07:13:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:11 Get A/D filter: -9.255963e+061 result=40 07:13:11 Get A/D value=-858993460 result=40 07:13:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:11 Aux= 07:13:11 Message to Camera, serial 269126 queued 07:13:48 Received message from Master: op=PointingHead serial=269139 07:13:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:13:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:13:48 Point started: ret=0 07:13:48 point_skyscan result=0 07:13:49 Check angles 07:13:49 SkyScan query 07:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:13:49 Message to Master queued w/err=0: serial=269139 error=0 07:13:54 Received message from Master: op=Filter serial=269140 07:13:54 Color wheel filter change from 0 to 0 07:13:54 FLIGetFilterPos err=0 currentPosition=0 07:13:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:54 Filter is already there-color wheel unchanged 07:13:55 Received message from Master: op=Shutter serial=269141 07:13:55 Shutter LASER close 07:13:55 Received message from Camera: op=State serial=269143 07:13:55 GetSingleValue result=40 Value=cccccccc 07:13:55 SkyScan query 07:13:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:55 Parameters OK 07:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:55 Set A/D data flow result=40 07:13:55 Set A/D channel type result=40 07:13:55 Set A/D encoding result=40 07:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:55 Set channel filter=0.000000e+000 result=40 07:13:55 Config A/D Result=40 07:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:55 Get A/D filter: -9.255963e+061 result=40 07:13:55 Get A/D value=-858993460 result=40 07:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:55 Parameters OK 07:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:55 Set A/D data flow result=40 07:13:55 Set A/D channel type result=40 07:13:55 Set A/D encoding result=40 07:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:55 Set channel filter=0.000000e+000 result=40 07:13:55 Config A/D Result=40 07:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:55 Get A/D filter: -9.255963e+061 result=40 07:13:55 Get A/D value=-858993460 result=40 07:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:55 Aux= 07:13:55 Message to Camera, serial 269143 queued [UTC 2019-3-14 07:14:32] 07:14:32 Received message from Master: op=PointingHead serial=269156 07:14:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:14:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:14:33 Point started: ret=0 07:14:33 point_skyscan result=0 07:14:33 Check angles 07:14:33 SkyScan query 07:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:14:34 Message to Master queued w/err=0: serial=269156 error=0 07:14:39 Received message from Master: op=Filter serial=269157 07:14:39 Color wheel filter change from 0 to 0 07:14:39 FLIGetFilterPos err=0 currentPosition=0 07:14:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:39 Filter is already there-color wheel unchanged 07:14:39 Received message from Master: op=Shutter serial=269158 07:14:39 Shutter LASER close 07:14:39 Received message from Camera: op=State serial=269160 07:14:39 GetSingleValue result=40 Value=cccccccc 07:14:39 SkyScan query 07:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:14:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:40 Parameters OK 07:14:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:40 Set A/D data flow result=40 07:14:40 Set A/D channel type result=40 07:14:40 Set A/D encoding result=40 07:14:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:40 Set channel filter=0.000000e+000 result=40 07:14:40 Config A/D Result=40 07:14:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:40 Get A/D filter: -9.255963e+061 result=40 07:14:40 Get A/D value=-858993460 result=40 07:14:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:40 Aux= 07:14:40 Message to Camera, serial 269160 queued 07:15:17 Received message from Master: op=PointingHead serial=269173 07:15:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:15:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:15:17 Point started: ret=0 07:15:17 point_skyscan result=0 07:15:18 Check angles 07:15:18 SkyScan query 07:15:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 07:15:18 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 07:15:18 Check angles 07:15:18 SkyScan query 07:15:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 07:15:19 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 07:15:19 Check angles 07:15:19 SkyScan query 07:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.145<-16343 Statuses=0008 0009 07:15:20 Msec=1500 True Az=112.995 Ze=-65.145 Az status=0008 Ze status=0009 07:15:20 Check angles 07:15:20 SkyScan query 07:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 07:15:20 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 07:15:21 Check angles 07:15:21 SkyScan query 07:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.01<-19134 Statuses=0008 0009 07:15:21 Msec=3000 True Az=112.995 Ze=-107.01 Az status=0008 Ze status=0009 07:15:21 Check angles 07:15:21 SkyScan query 07:15:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.98<-20532 Statuses=0008 0009 07:15:22 Msec=3750 True Az=112.995 Ze=-127.98 Az status=0008 Ze status=0009 07:15:22 Check angles 07:15:22 SkyScan query 07:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.935<-21929 Statuses=0008 0009 07:15:23 Msec=4500 True Az=112.995 Ze=-148.935 Az status=0008 Ze status=0009 07:15:23 Check angles 07:15:23 SkyScan query 07:15:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.875<-23325 Statuses=0008 0009 07:15:23 Msec=5250 True Az=112.995 Ze=-169.875 Az status=0008 Ze status=0009 07:15:24 Check angles 07:15:24 SkyScan query 07:15:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:15:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:15:24 Message to Master queued w/err=0: serial=269173 error=0 07:15:29 Received message from Master: op=Filter serial=269174 07:15:29 Color wheel filter change from 0 to 0 07:15:29 FLIGetFilterPos err=0 currentPosition=0 07:15:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:29 Filter is already there-color wheel unchanged 07:15:29 Received message from Master: op=Shutter serial=269175 07:15:29 Shutter LASER open 07:15:30 Received message from Camera: op=State serial=269177 07:15:30 GetSingleValue result=40 Value=cccccccc 07:15:30 SkyScan query 07:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:15:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:30 Parameters OK 07:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:30 Set A/D data flow result=40 07:15:30 Set A/D channel type result=40 07:15:30 Set A/D encoding result=40 07:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:30 Set channel filter=0.000000e+000 result=40 07:15:30 Config A/D Result=40 07:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:30 Get A/D filter: -9.255963e+061 result=40 07:15:30 Get A/D value=-858993460 result=40 07:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:30 Parameters OK 07:15:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:30 Set A/D data flow result=40 07:15:30 Set A/D channel type result=40 07:15:30 Set A/D encoding result=40 07:15:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:30 Set channel filter=0.000000e+000 result=40 07:15:30 Config A/D Result=40 07:15:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:30 Get A/D filter: -9.255963e+061 result=40 07:15:30 Get A/D value=-858993460 result=40 07:15:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:30 Aux= 07:15:30 Message to Camera, serial 269177 queued 07:15:39 Received message from Master: op=Shutter serial=269187 07:15:39 Shutter LASER close 07:15:39 Received message from Master: op=PointingHead serial=269191 07:15:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:15:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:15:40 Point started: ret=0 07:15:40 point_skyscan result=0 07:15:40 Check angles 07:15:40 SkyScan query 07:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 07:15:41 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 07:15:41 Check angles 07:15:41 SkyScan query 07:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 07:15:42 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 07:15:42 Check angles 07:15:42 SkyScan query 07:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 07:15:42 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 07:15:43 Check angles 07:15:43 SkyScan query 07:15:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 07:15:43 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 07:15:43 Check angles 07:15:43 SkyScan query 07:15:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 07:15:44 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 07:15:44 Check angles 07:15:44 SkyScan query 07:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.43<-14562 Statuses=0008 0009 07:15:45 Msec=3750 True Az=112.995 Ze=-38.43 Az status=0008 Ze status=0009 07:15:45 Check angles 07:15:45 SkyScan query 07:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.505<-13167 Statuses=0008 0009 07:15:45 Msec=4500 True Az=112.995 Ze=-17.505 Az status=0008 Ze status=0009 07:15:46 Check angles 07:15:46 SkyScan query 07:15:46 SkyScan query done: ret=0 az=112.995<-7533 ze=3.48<-11768 Statuses=0008 0009 07:15:46 Msec=5250 True Az=112.995 Ze=3.48 Az status=0008 Ze status=0009 07:15:46 Check angles 07:15:46 SkyScan query 07:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:15:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:15:47 Message to Master queued w/err=0: serial=269191 error=0 07:15:52 Received message from Master: op=Filter serial=269192 07:15:52 Color wheel filter change from 0 to 0 07:15:52 FLIGetFilterPos err=0 currentPosition=0 07:15:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:52 Filter is already there-color wheel unchanged 07:15:52 Received message from Master: op=Shutter serial=269193 07:15:52 Shutter LASER close 07:15:52 Received message from Camera: op=State serial=269195 07:15:52 GetSingleValue result=40 Value=cccccccc 07:15:52 SkyScan query 07:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:53 Parameters OK 07:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:53 Set A/D data flow result=40 07:15:53 Set A/D channel type result=40 07:15:53 Set A/D encoding result=40 07:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:53 Set channel filter=0.000000e+000 result=40 07:15:53 Config A/D Result=40 07:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:53 Get A/D filter: -9.255963e+061 result=40 07:15:53 Get A/D value=-858993460 result=40 07:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:53 Parameters OK 07:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:53 Set A/D data flow result=40 07:15:53 Set A/D channel type result=40 07:15:53 Set A/D encoding result=40 07:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:53 Set channel filter=0.000000e+000 result=40 07:15:53 Config A/D Result=40 07:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:53 Get A/D filter: -9.255963e+061 result=40 07:15:53 Get A/D value=-858993460 result=40 07:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:53 Aux= 07:15:53 Message to Camera, serial 269195 queued 07:16:30 Received message from Master: op=PointingHead serial=269208 07:16:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:16:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:16:30 Point started: ret=0 07:16:30 point_skyscan result=0 07:16:31 Check angles 07:16:31 SkyScan query 07:16:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:16:31 Message to Master queued w/err=0: serial=269208 error=0 07:16:36 Received message from Master: op=Filter serial=269209 07:16:36 Color wheel filter change from 0 to 0 07:16:36 FLIGetFilterPos err=0 currentPosition=0 07:16:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:36 Filter is already there-color wheel unchanged 07:16:37 Received message from Master: op=Shutter serial=269210 07:16:37 Shutter LASER close 07:16:37 Received message from Camera: op=State serial=269212 07:16:37 GetSingleValue result=40 Value=cccccccc 07:16:37 SkyScan query 07:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:16:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:37 Parameters OK 07:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:37 Set A/D data flow result=40 07:16:37 Set A/D channel type result=40 07:16:37 Set A/D encoding result=40 07:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:37 Set channel filter=0.000000e+000 result=40 07:16:37 Config A/D Result=40 07:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:37 Get A/D filter: -9.255963e+061 result=40 07:16:37 Get A/D value=-858993460 result=40 07:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:37 Parameters OK 07:16:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:37 Set A/D data flow result=40 07:16:37 Set A/D channel type result=40 07:16:37 Set A/D encoding result=40 07:16:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:37 Set channel filter=0.000000e+000 result=40 07:16:37 Config A/D Result=40 07:16:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:37 Get A/D filter: -9.255963e+061 result=40 07:16:37 Get A/D value=-858993460 result=40 07:16:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:37 Aux= 07:16:37 Message to Camera, serial 269212 queued 07:17:14 Received message from Master: op=PointingHead serial=269225 07:17:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:17:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:17:14 Point started: ret=0 07:17:14 point_skyscan result=0 07:17:15 Check angles 07:17:15 SkyScan query 07:17:16 SkyScan query done: ret=0 az=136.395<-9093 ze=-6.51<-12434 Statuses=0009 0008 07:17:16 Msec=0 True Az=136.395 Ze=-6.51 Az status=0009 Ze status=0008 07:17:16 Check angles 07:17:16 SkyScan query 07:17:16 SkyScan query done: ret=0 az=153.75<-10250 ze=-6.495<-12433 Statuses=0009 0008 07:17:16 Msec=750 True Az=153.75 Ze=-6.495 Az status=0009 Ze status=0008 07:17:17 Check angles 07:17:17 SkyScan query 07:17:17 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 07:17:17 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 07:17:17 Check angles 07:17:17 SkyScan query 07:17:18 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:17:18 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:17:18 Message to Master queued w/err=0: serial=269225 error=0 07:17:23 Received message from Master: op=Filter serial=269226 07:17:23 Color wheel filter change from 0 to 0 07:17:23 FLIGetFilterPos err=0 currentPosition=0 07:17:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:23 Filter is already there-color wheel unchanged 07:17:23 Received message from Master: op=Shutter serial=269227 07:17:23 Shutter LASER close 07:17:23 Received message from Camera: op=State serial=269229 07:17:23 GetSingleValue result=40 Value=cccccccc 07:17:23 SkyScan query 07:17:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:17:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:24 Parameters OK 07:17:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:24 Set A/D data flow result=40 07:17:24 Set A/D channel type result=40 07:17:24 Set A/D encoding result=40 07:17:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:24 Set channel filter=0.000000e+000 result=40 07:17:24 Config A/D Result=40 07:17:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:24 Get A/D filter: -9.255963e+061 result=40 07:17:24 Get A/D value=-858993460 result=40 07:17:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:24 Parameters OK 07:17:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:24 Set A/D data flow result=40 07:17:24 Set A/D channel type result=40 07:17:24 Set A/D encoding result=40 07:17:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:24 Set channel filter=0.000000e+000 result=40 07:17:24 Config A/D Result=40 07:17:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:24 Get A/D filter: -9.255963e+061 result=40 07:17:24 Get A/D value=-858993460 result=40 07:17:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:24 Aux= 07:17:24 Message to Camera, serial 269229 queued 07:18:01 Received message from Master: op=PointingHead serial=269242 07:18:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:18:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:18:01 Point started: ret=0 07:18:01 point_skyscan result=0 07:18:02 Check angles 07:18:02 SkyScan query 07:18:02 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 07:18:02 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 07:18:02 Check angles 07:18:02 SkyScan query 07:18:03 SkyScan query done: ret=0 az=134.82<-8988 ze=6.495<-11567 Statuses=0009 0008 07:18:03 Msec=750 True Az=134.82 Ze=6.495 Az status=0009 Ze status=0008 07:18:03 Check angles 07:18:03 SkyScan query 07:18:04 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 07:18:04 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 07:18:04 Check angles 07:18:04 SkyScan query 07:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:05 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:18:05 Message to Master queued w/err=0: serial=269242 error=0 07:18:10 Received message from Master: op=Filter serial=269243 07:18:10 Color wheel filter change from 0 to 0 07:18:10 FLIGetFilterPos err=0 currentPosition=0 07:18:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:10 Filter is already there-color wheel unchanged 07:18:10 Received message from Master: op=Shutter serial=269244 07:18:10 Shutter LASER close 07:18:10 Received message from Camera: op=State serial=269246 07:18:10 GetSingleValue result=40 Value=cccccccc 07:18:10 SkyScan query 07:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:18:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:10 Parameters OK 07:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:10 Set A/D data flow result=40 07:18:10 Set A/D channel type result=40 07:18:10 Set A/D encoding result=40 07:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:10 Set channel filter=0.000000e+000 result=40 07:18:10 Config A/D Result=40 07:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:10 Get A/D filter: -9.255963e+061 result=40 07:18:10 Get A/D value=-858993460 result=40 07:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:10 Parameters OK 07:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:10 Set A/D data flow result=40 07:18:10 Set A/D channel type result=40 07:18:10 Set A/D encoding result=40 07:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:10 Set channel filter=0.000000e+000 result=40 07:18:10 Config A/D Result=40 07:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:10 Get A/D filter: -9.255963e+061 result=40 07:18:10 Get A/D value=-858993460 result=40 07:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:10 Aux= 07:18:10 Message to Camera, serial 269246 queued 07:18:47 Received message from Master: op=PointingHead serial=269259 07:18:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:18:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:18:48 Point started: ret=0 07:18:48 point_skyscan result=0 07:18:48 Check angles 07:18:48 SkyScan query 07:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 07:18:49 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 07:18:49 Check angles 07:18:49 SkyScan query 07:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 07:18:50 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 07:18:50 Check angles 07:18:50 SkyScan query 07:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 07:18:50 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 07:18:51 Check angles 07:18:51 SkyScan query 07:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 07:18:51 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 07:18:51 Check angles 07:18:51 SkyScan query 07:18:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 07:18:52 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 07:18:52 Check angles 07:18:52 SkyScan query 07:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 07:18:53 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 07:18:53 Check angles 07:18:53 SkyScan query 07:18:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 07:18:53 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 07:18:54 Check angles 07:18:54 SkyScan query 07:18:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.25<-23350 Statuses=0008 0009 07:18:54 Msec=5250 True Az=112.995 Ze=-170.25 Az status=0008 Ze status=0009 07:18:54 Check angles 07:18:54 SkyScan query 07:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:18:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:18:55 Message to Master queued w/err=0: serial=269259 error=0 07:19:00 Received message from Master: op=Filter serial=269260 07:19:00 Color wheel filter change from 0 to 0 07:19:00 FLIGetFilterPos err=0 currentPosition=0 07:19:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:00 Filter is already there-color wheel unchanged 07:19:00 Received message from Master: op=Shutter serial=269261 07:19:00 Shutter LASER open 07:19:00 Received message from Camera: op=State serial=269263 07:19:00 GetSingleValue result=40 Value=cccccccc 07:19:00 SkyScan query 07:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:19:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:01 Parameters OK 07:19:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:01 Set A/D data flow result=40 07:19:01 Set A/D channel type result=40 07:19:01 Set A/D encoding result=40 07:19:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:01 Set channel filter=0.000000e+000 result=40 07:19:01 Config A/D Result=40 07:19:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:01 Get A/D filter: -9.255963e+061 result=40 07:19:01 Get A/D value=-858993460 result=40 07:19:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:01 Parameters OK 07:19:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:01 Set A/D data flow result=40 07:19:01 Set A/D channel type result=40 07:19:01 Set A/D encoding result=40 07:19:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:01 Set channel filter=0.000000e+000 result=40 07:19:01 Config A/D Result=40 07:19:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:01 Get A/D filter: -9.255963e+061 result=40 07:19:01 Get A/D value=-858993460 result=40 07:19:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:01 Aux= 07:19:01 Message to Camera, serial 269263 queued 07:19:08 Received message from Master: op=Shutter serial=269272 07:19:08 Shutter LASER close 07:19:09 Received message from Master: op=PointingHead serial=269276 07:19:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:19:09 Point started: ret=0 07:19:09 point_skyscan result=0 07:19:10 Check angles 07:19:10 SkyScan query 07:19:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.385<-21559 Statuses=0008 0009 07:19:10 Msec=0 True Az=112.995 Ze=-143.385 Az status=0008 Ze status=0009 07:19:11 Check angles 07:19:11 SkyScan query 07:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 07:19:11 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 07:19:11 Check angles 07:19:11 SkyScan query 07:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 07:19:12 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 07:19:12 Check angles 07:19:12 SkyScan query 07:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 07:19:13 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 07:19:13 Check angles 07:19:13 SkyScan query 07:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 07:19:13 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 07:19:14 Check angles 07:19:14 SkyScan query 07:19:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.305<-14487 Statuses=0008 0009 07:19:14 Msec=3750 True Az=112.995 Ze=-37.305 Az status=0008 Ze status=0009 07:19:14 Check angles 07:19:14 SkyScan query 07:19:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.305<-13087 Statuses=0008 0009 07:19:15 Msec=4500 True Az=112.995 Ze=-16.305 Az status=0008 Ze status=0009 07:19:15 Check angles 07:19:15 SkyScan query 07:19:16 SkyScan query done: ret=0 az=113.01<-7534 ze=4.5<-11700 Statuses=0008 0009 07:19:16 Msec=5250 True Az=113.01 Ze=4.5 Az status=0008 Ze status=0009 07:19:16 Check angles 07:19:16 SkyScan query 07:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:19:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:19:16 Message to Master queued w/err=0: serial=269276 error=0 07:19:21 Received message from Master: op=Filter serial=269277 07:19:21 Color wheel filter change from 0 to 0 07:19:21 FLIGetFilterPos err=0 currentPosition=0 07:19:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:21 Filter is already there-color wheel unchanged 07:19:22 Received message from Master: op=Shutter serial=269278 07:19:22 Shutter LASER close 07:19:22 Received message from Camera: op=State serial=269280 07:19:22 GetSingleValue result=40 Value=cccccccc 07:19:22 SkyScan query 07:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:19:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:22 Parameters OK 07:19:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:22 Set A/D data flow result=40 07:19:22 Set A/D channel type result=40 07:19:22 Set A/D encoding result=40 07:19:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:22 Set channel filter=0.000000e+000 result=40 07:19:22 Config A/D Result=40 07:19:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:22 Get A/D filter: -9.255963e+061 result=40 07:19:22 Get A/D value=-858993460 result=40 07:19:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:22 Parameters OK 07:19:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:22 Set A/D data flow result=40 07:19:22 Set A/D channel type result=40 07:19:22 Set A/D encoding result=40 07:19:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:22 Set channel filter=0.000000e+000 result=40 07:19:22 Config A/D Result=40 07:19:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:22 Get A/D filter: -9.255963e+061 result=40 07:19:22 Get A/D value=-858993460 result=40 07:19:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:22 Aux= 07:19:22 Message to Camera, serial 269280 queued 07:19:59 Received message from Master: op=PointingHead serial=269293 07:19:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:19:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:20:00 Point started: ret=0 07:20:00 point_skyscan result=0 07:20:00 Check angles 07:20:00 SkyScan query 07:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:20:01 Message to Master queued w/err=0: serial=269293 error=0 07:20:06 Received message from Master: op=Filter serial=269294 07:20:06 Color wheel filter change from 0 to 0 07:20:06 FLIGetFilterPos err=0 currentPosition=0 07:20:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:06 Filter is already there-color wheel unchanged 07:20:06 Received message from Master: op=Shutter serial=269295 07:20:06 Shutter LASER close 07:20:06 Received message from Camera: op=State serial=269297 07:20:06 GetSingleValue result=40 Value=cccccccc 07:20:06 SkyScan query 07:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:07 Parameters OK 07:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:07 Set A/D data flow result=40 07:20:07 Set A/D channel type result=40 07:20:07 Set A/D encoding result=40 07:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:07 Set channel filter=0.000000e+000 result=40 07:20:07 Config A/D Result=40 07:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:07 Get A/D filter: -9.255963e+061 result=40 07:20:07 Get A/D value=-858993460 result=40 07:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:07 Parameters OK 07:20:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:07 Set A/D data flow result=40 07:20:07 Set A/D channel type result=40 07:20:07 Set A/D encoding result=40 07:20:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:07 Set channel filter=0.000000e+000 result=40 07:20:07 Config A/D Result=40 07:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:07 Get A/D filter: -9.255963e+061 result=40 07:20:07 Get A/D value=-858993460 result=40 07:20:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:07 Aux= 07:20:07 Message to Camera, serial 269297 queued 07:20:44 Received message from Master: op=PointingHead serial=269310 07:20:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:20:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:20:44 Point started: ret=0 07:20:44 point_skyscan result=0 07:20:45 Check angles 07:20:45 SkyScan query 07:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:20:45 Message to Master queued w/err=0: serial=269310 error=0 07:20:50 Received message from Master: op=Filter serial=269311 07:20:50 Color wheel filter change from 0 to 0 07:20:50 FLIGetFilterPos err=0 currentPosition=0 07:20:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:50 Filter is already there-color wheel unchanged 07:20:50 Received message from Master: op=Shutter serial=269312 07:20:50 Shutter LASER close 07:20:50 Received message from Camera: op=State serial=269314 07:20:50 GetSingleValue result=40 Value=cccccccc 07:20:50 SkyScan query 07:20:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:20:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:51 Parameters OK 07:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:51 Set A/D data flow result=40 07:20:51 Set A/D channel type result=40 07:20:51 Set A/D encoding result=40 07:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:51 Set channel filter=0.000000e+000 result=40 07:20:51 Config A/D Result=40 07:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:51 Get A/D filter: -9.255963e+061 result=40 07:20:51 Get A/D value=-858993460 result=40 07:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:51 Parameters OK 07:20:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:51 Set A/D data flow result=40 07:20:51 Set A/D channel type result=40 07:20:51 Set A/D encoding result=40 07:20:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:51 Set channel filter=0.000000e+000 result=40 07:20:51 Config A/D Result=40 07:20:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:51 Get A/D filter: -9.255963e+061 result=40 07:20:51 Get A/D value=-858993460 result=40 07:20:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:51 Aux= 07:20:51 Message to Camera, serial 269314 queued 07:21:28 Received message from Master: op=PointingHead serial=269327 07:21:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:21:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:21:28 Point started: ret=0 07:21:28 point_skyscan result=0 07:21:29 Check angles 07:21:29 SkyScan query 07:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:21:29 Message to Master queued w/err=0: serial=269327 error=0 07:21:34 Received message from Master: op=Filter serial=269328 07:21:34 Color wheel filter change from 0 to 0 07:21:34 FLIGetFilterPos err=0 currentPosition=0 07:21:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:34 Filter is already there-color wheel unchanged 07:21:35 Received message from Master: op=Shutter serial=269329 07:21:35 Shutter LASER close 07:21:35 Received message from Camera: op=State serial=269331 07:21:35 GetSingleValue result=40 Value=cccccccc 07:21:35 SkyScan query 07:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:21:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:35 Parameters OK 07:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:35 Set A/D data flow result=40 07:21:35 Set A/D channel type result=40 07:21:35 Set A/D encoding result=40 07:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:35 Set channel filter=0.000000e+000 result=40 07:21:35 Config A/D Result=40 07:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:35 Get A/D filter: -9.255963e+061 result=40 07:21:35 Get A/D value=-858993460 result=40 07:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:35 Parameters OK 07:21:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:35 Set A/D data flow result=40 07:21:35 Set A/D channel type result=40 07:21:35 Set A/D encoding result=40 07:21:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:35 Set channel filter=0.000000e+000 result=40 07:21:35 Config A/D Result=40 07:21:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:35 Get A/D filter: -9.255963e+061 result=40 07:21:35 Get A/D value=-858993460 result=40 07:21:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:35 Aux= 07:21:35 Message to Camera, serial 269331 queued 07:22:12 Received message from Master: op=PointingHead serial=269344 07:22:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:22:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:22:12 Point started: ret=0 07:22:12 point_skyscan result=0 07:22:13 Check angles 07:22:13 SkyScan query 07:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 07:22:14 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 07:22:14 Check angles 07:22:14 SkyScan query 07:22:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 07:22:14 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 07:22:15 Check angles 07:22:15 SkyScan query 07:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 07:22:15 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 07:22:15 Check angles 07:22:15 SkyScan query 07:22:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.935<-17729 Statuses=0008 0009 07:22:16 Msec=2250 True Az=112.995 Ze=-85.935 Az status=0008 Ze status=0009 07:22:16 Check angles 07:22:16 SkyScan query 07:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.86<-19124 Statuses=0008 0009 07:22:17 Msec=3000 True Az=112.995 Ze=-106.86 Az status=0008 Ze status=0009 07:22:17 Check angles 07:22:17 SkyScan query 07:22:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.785<-20519 Statuses=0008 0009 07:22:17 Msec=3750 True Az=112.995 Ze=-127.785 Az status=0008 Ze status=0009 07:22:18 Check angles 07:22:18 SkyScan query 07:22:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.74<-21916 Statuses=0008 0009 07:22:18 Msec=4500 True Az=112.995 Ze=-148.74 Az status=0008 Ze status=0009 07:22:18 Check angles 07:22:18 SkyScan query 07:22:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.68<-23312 Statuses=0008 0009 07:22:19 Msec=5250 True Az=112.995 Ze=-169.68 Az status=0008 Ze status=0009 07:22:19 Check angles 07:22:19 SkyScan query 07:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:22:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:22:20 Message to Master queued w/err=0: serial=269344 error=0 07:22:25 Received message from Master: op=Filter serial=269345 07:22:25 Color wheel filter change from 0 to 0 07:22:25 FLIGetFilterPos err=0 currentPosition=0 07:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:25 Filter is already there-color wheel unchanged 07:22:25 Received message from Master: op=Shutter serial=269346 07:22:25 Shutter LASER open 07:22:25 Received message from Camera: op=State serial=269348 07:22:25 GetSingleValue result=40 Value=cccccccc 07:22:25 SkyScan query 07:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:26 Parameters OK 07:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:26 Set A/D data flow result=40 07:22:26 Set A/D channel type result=40 07:22:26 Set A/D encoding result=40 07:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:26 Set channel filter=0.000000e+000 result=40 07:22:26 Config A/D Result=40 07:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:26 Get A/D filter: -9.255963e+061 result=40 07:22:26 Get A/D value=-858993460 result=40 07:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:26 Parameters OK 07:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:26 Set A/D data flow result=40 07:22:26 Set A/D channel type result=40 07:22:26 Set A/D encoding result=40 07:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:26 Set channel filter=0.000000e+000 result=40 07:22:26 Config A/D Result=40 07:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:26 Get A/D filter: -9.255963e+061 result=40 07:22:26 Get A/D value=-858993460 result=40 07:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:26 Aux= 07:22:26 Message to Camera, serial 269348 queued 07:22:34 Received message from Master: op=Shutter serial=269358 07:22:34 Shutter LASER close 07:22:35 Received message from Master: op=PointingHead serial=269362 07:22:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:22:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:22:35 Point started: ret=0 07:22:35 point_skyscan result=0 07:22:36 Check angles 07:22:36 SkyScan query 07:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 07:22:36 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 07:22:37 Check angles 07:22:37 SkyScan query 07:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.445<-20163 Statuses=0008 0009 07:22:37 Msec=750 True Az=112.995 Ze=-122.445 Az status=0008 Ze status=0009 07:22:37 Check angles 07:22:37 SkyScan query 07:22:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.07<-18738 Statuses=0008 0009 07:22:38 Msec=1500 True Az=112.995 Ze=-101.07 Az status=0008 Ze status=0009 07:22:38 Check angles 07:22:38 SkyScan query 07:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.085<-17339 Statuses=0008 0009 07:22:39 Msec=2250 True Az=112.995 Ze=-80.085 Az status=0008 Ze status=0009 07:22:39 Check angles 07:22:39 SkyScan query 07:22:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.145<-15943 Statuses=0008 0009 07:22:39 Msec=3000 True Az=112.995 Ze=-59.145 Az status=0008 Ze status=0009 07:22:40 Check angles 07:22:40 SkyScan query 07:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.115<-14541 Statuses=0008 0009 07:22:40 Msec=3750 True Az=112.995 Ze=-38.115 Az status=0008 Ze status=0009 07:22:40 Check angles 07:22:40 SkyScan query 07:22:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.19<-13146 Statuses=0008 0009 07:22:41 Msec=4500 True Az=112.995 Ze=-17.19 Az status=0008 Ze status=0009 07:22:41 Check angles 07:22:41 SkyScan query 07:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=3.795<-11747 Statuses=0008 0009 07:22:42 Msec=5250 True Az=112.995 Ze=3.795 Az status=0008 Ze status=0009 07:22:42 Check angles 07:22:42 SkyScan query 07:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:22:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:22:42 Message to Master queued w/err=0: serial=269362 error=0 07:22:47 Received message from Master: op=Filter serial=269363 07:22:47 Color wheel filter change from 0 to 0 07:22:47 FLIGetFilterPos err=0 currentPosition=0 07:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:47 Filter is already there-color wheel unchanged 07:22:48 Received message from Master: op=Shutter serial=269364 07:22:48 Shutter LASER close 07:22:48 Received message from Camera: op=State serial=269366 07:22:48 GetSingleValue result=40 Value=cccccccc 07:22:48 SkyScan query 07:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:48 Parameters OK 07:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:48 Set A/D data flow result=40 07:22:48 Set A/D channel type result=40 07:22:48 Set A/D encoding result=40 07:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:48 Set channel filter=0.000000e+000 result=40 07:22:48 Config A/D Result=40 07:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:48 Get A/D filter: -9.255963e+061 result=40 07:22:48 Get A/D value=-858993460 result=40 07:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:48 Parameters OK 07:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:48 Set A/D data flow result=40 07:22:48 Set A/D channel type result=40 07:22:48 Set A/D encoding result=40 07:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:48 Set channel filter=0.000000e+000 result=40 07:22:48 Config A/D Result=40 07:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:48 Get A/D filter: -9.255963e+061 result=40 07:22:48 Get A/D value=-858993460 result=40 07:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:48 Aux= 07:22:48 Message to Camera, serial 269366 queued 07:23:25 Received message from Master: op=PointingHead serial=269379 07:23:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:23:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:23:26 Point started: ret=0 07:23:26 point_skyscan result=0 07:23:26 Check angles 07:23:26 SkyScan query 07:23:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:23:27 Message to Master queued w/err=0: serial=269379 error=0 07:23:32 Received message from Master: op=Filter serial=269380 07:23:32 Color wheel filter change from 0 to 0 07:23:32 FLIGetFilterPos err=0 currentPosition=0 07:23:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:32 Filter is already there-color wheel unchanged 07:23:32 Received message from Master: op=Shutter serial=269381 07:23:32 Shutter LASER close 07:23:32 Received message from Camera: op=State serial=269383 07:23:32 GetSingleValue result=40 Value=cccccccc 07:23:32 SkyScan query 07:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:33 Parameters OK 07:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:33 Set A/D data flow result=40 07:23:33 Set A/D channel type result=40 07:23:33 Set A/D encoding result=40 07:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:33 Set channel filter=0.000000e+000 result=40 07:23:33 Config A/D Result=40 07:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:33 Get A/D filter: -9.255963e+061 result=40 07:23:33 Get A/D value=-858993460 result=40 07:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:33 Parameters OK 07:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:33 Set A/D data flow result=40 07:23:33 Set A/D channel type result=40 07:23:33 Set A/D encoding result=40 07:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:33 Set channel filter=0.000000e+000 result=40 07:23:33 Config A/D Result=40 07:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:33 Get A/D filter: -9.255963e+061 result=40 07:23:33 Get A/D value=-858993460 result=40 07:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:33 Aux= 07:23:33 Message to Camera, serial 269383 queued [UTC 2019-3-14 07:23:48] 07:24:10 Received message from Master: op=PointingHead serial=269396 07:24:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:24:10 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:24:10 Point started: ret=0 07:24:10 point_skyscan result=0 07:24:11 Check angles 07:24:11 SkyScan query 07:24:11 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 07:24:11 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 07:24:11 Check angles 07:24:11 SkyScan query 07:24:12 SkyScan query done: ret=0 az=154.185<-10279 ze=-6.495<-12433 Statuses=0009 0008 07:24:12 Msec=750 True Az=154.185 Ze=-6.495 Az status=0009 Ze status=0008 07:24:12 Check angles 07:24:12 SkyScan query 07:24:13 SkyScan query done: ret=0 az=171.765<-11451 ze=-6.495<-12433 Statuses=0009 0008 07:24:13 Msec=1500 True Az=171.765 Ze=-6.495 Az status=0009 Ze status=0008 07:24:13 Check angles 07:24:13 SkyScan query 07:24:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:24:13 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:24:13 Message to Master queued w/err=0: serial=269396 error=0 07:24:18 Received message from Master: op=Filter serial=269397 07:24:18 Color wheel filter change from 0 to 0 07:24:18 FLIGetFilterPos err=0 currentPosition=0 07:24:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:18 Filter is already there-color wheel unchanged 07:24:19 Received message from Master: op=Shutter serial=269398 07:24:19 Shutter LASER close 07:24:19 Received message from Camera: op=State serial=269400 07:24:19 GetSingleValue result=40 Value=cccccccc 07:24:19 SkyScan query 07:24:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:19 Parameters OK 07:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:19 Set A/D data flow result=40 07:24:19 Set A/D channel type result=40 07:24:19 Set A/D encoding result=40 07:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:19 Set channel filter=0.000000e+000 result=40 07:24:19 Config A/D Result=40 07:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:19 Get A/D filter: -9.255963e+061 result=40 07:24:19 Get A/D value=-858993460 result=40 07:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:19 Parameters OK 07:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:19 Set A/D data flow result=40 07:24:19 Set A/D channel type result=40 07:24:19 Set A/D encoding result=40 07:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:19 Set channel filter=0.000000e+000 result=40 07:24:19 Config A/D Result=40 07:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:19 Get A/D filter: -9.255963e+061 result=40 07:24:19 Get A/D value=-858993460 result=40 07:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:19 Aux= 07:24:19 Message to Camera, serial 269400 queued 07:24:56 Received message from Master: op=PointingHead serial=269413 07:24:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:24:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:24:56 Point started: ret=0 07:24:56 point_skyscan result=0 07:24:57 Check angles 07:24:57 SkyScan query 07:24:58 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 07:24:58 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 07:24:58 Check angles 07:24:58 SkyScan query 07:24:58 SkyScan query done: ret=0 az=135.3<-9020 ze=6.495<-11567 Statuses=0009 0008 07:24:58 Msec=750 True Az=135.3 Ze=6.495 Az status=0009 Ze status=0008 07:24:59 Check angles 07:24:59 SkyScan query 07:24:59 SkyScan query done: ret=0 az=117.93<-7862 ze=6.495<-11567 Statuses=0009 0008 07:24:59 Msec=1500 True Az=117.93 Ze=6.495 Az status=0009 Ze status=0008 07:24:59 Check angles 07:24:59 SkyScan query 07:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:00 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:25:00 Message to Master queued w/err=0: serial=269413 error=0 07:25:05 Received message from Master: op=Filter serial=269414 07:25:05 Color wheel filter change from 0 to 0 07:25:05 FLIGetFilterPos err=0 currentPosition=0 07:25:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:05 Filter is already there-color wheel unchanged 07:25:05 Received message from Master: op=Shutter serial=269415 07:25:05 Shutter LASER close 07:25:05 Received message from Camera: op=State serial=269417 07:25:05 GetSingleValue result=40 Value=cccccccc 07:25:05 SkyScan query 07:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:25:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:06 Parameters OK 07:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:06 Set A/D data flow result=40 07:25:06 Set A/D channel type result=40 07:25:06 Set A/D encoding result=40 07:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:06 Set channel filter=0.000000e+000 result=40 07:25:06 Config A/D Result=40 07:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:06 Get A/D filter: -9.255963e+061 result=40 07:25:06 Get A/D value=-858993460 result=40 07:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:06 Parameters OK 07:25:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:06 Set A/D data flow result=40 07:25:06 Set A/D channel type result=40 07:25:06 Set A/D encoding result=40 07:25:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:06 Set channel filter=0.000000e+000 result=40 07:25:06 Config A/D Result=40 07:25:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:06 Get A/D filter: -9.255963e+061 result=40 07:25:06 Get A/D value=-858993460 result=40 07:25:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:06 Aux= 07:25:06 Message to Camera, serial 269417 queued 07:25:43 Received message from Master: op=PointingHead serial=269430 07:25:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:25:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:25:43 Point started: ret=0 07:25:43 point_skyscan result=0 07:25:44 Check angles 07:25:44 SkyScan query 07:25:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 07:25:44 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 07:25:44 Check angles 07:25:44 SkyScan query 07:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 07:25:45 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 07:25:45 Check angles 07:25:45 SkyScan query 07:25:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-66<-16400 Statuses=0008 0009 07:25:46 Msec=1500 True Az=112.995 Ze=-66 Az status=0008 Ze status=0009 07:25:46 Check angles 07:25:46 SkyScan query 07:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.42<-17828 Statuses=0008 0009 07:25:47 Msec=2250 True Az=112.995 Ze=-87.42 Az status=0008 Ze status=0009 07:25:47 Check angles 07:25:47 SkyScan query 07:25:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.75<-19250 Statuses=0008 0009 07:25:47 Msec=3000 True Az=112.995 Ze=-108.75 Az status=0008 Ze status=0009 07:25:48 Check angles 07:25:48 SkyScan query 07:25:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.735<-20649 Statuses=0008 0009 07:25:48 Msec=3750 True Az=112.995 Ze=-129.735 Az status=0008 Ze status=0009 07:25:48 Check angles 07:25:48 SkyScan query 07:25:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.645<-22043 Statuses=0008 0009 07:25:49 Msec=4500 True Az=112.995 Ze=-150.645 Az status=0008 Ze status=0009 07:25:49 Check angles 07:25:49 SkyScan query 07:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.375<-23425 Statuses=0008 0009 07:25:50 Msec=5250 True Az=112.995 Ze=-171.375 Az status=0008 Ze status=0009 07:25:50 Check angles 07:25:50 SkyScan query 07:25:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:25:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:25:50 Message to Master queued w/err=0: serial=269430 error=0 07:25:55 Received message from Master: op=Filter serial=269431 07:25:55 Color wheel filter change from 0 to 0 07:25:55 FLIGetFilterPos err=0 currentPosition=0 07:25:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:55 Filter is already there-color wheel unchanged 07:25:56 Received message from Master: op=Shutter serial=269432 07:25:56 Shutter LASER open 07:25:56 Received message from Camera: op=State serial=269434 07:25:56 GetSingleValue result=40 Value=cccccccc 07:25:56 SkyScan query 07:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:25:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:56 Parameters OK 07:25:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:56 Set A/D data flow result=40 07:25:56 Set A/D channel type result=40 07:25:56 Set A/D encoding result=40 07:25:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:56 Set channel filter=0.000000e+000 result=40 07:25:56 Config A/D Result=40 07:25:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:56 Get A/D filter: -9.255963e+061 result=40 07:25:56 Get A/D value=-858993460 result=40 07:25:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:56 Parameters OK 07:25:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:56 Set A/D data flow result=40 07:25:56 Set A/D channel type result=40 07:25:56 Set A/D encoding result=40 07:25:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:56 Set channel filter=0.000000e+000 result=40 07:25:56 Config A/D Result=40 07:25:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:56 Get A/D filter: -9.255963e+061 result=40 07:25:56 Get A/D value=-858993460 result=40 07:25:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:56 Aux= 07:25:56 Message to Camera, serial 269434 queued 07:26:05 Received message from Master: op=Shutter serial=269444 07:26:05 Shutter LASER close 07:26:05 Received message from Master: op=PointingHead serial=269448 07:26:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:06 Point started: ret=0 07:26:06 point_skyscan result=0 07:26:06 Check angles 07:26:06 SkyScan query 07:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 07:26:07 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 07:26:07 Check angles 07:26:07 SkyScan query 07:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 07:26:08 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 07:26:08 Check angles 07:26:08 SkyScan query 07:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 07:26:08 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 07:26:09 Check angles 07:26:09 SkyScan query 07:26:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 07:26:09 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 07:26:09 Check angles 07:26:09 SkyScan query 07:26:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 07:26:10 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 07:26:10 Check angles 07:26:10 SkyScan query 07:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.98<-14532 Statuses=0008 0009 07:26:11 Msec=3750 True Az=112.995 Ze=-37.98 Az status=0008 Ze status=0009 07:26:11 Check angles 07:26:11 SkyScan query 07:26:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.04<-13136 Statuses=0008 0009 07:26:11 Msec=4500 True Az=112.995 Ze=-17.04 Az status=0008 Ze status=0009 07:26:12 Check angles 07:26:12 SkyScan query 07:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=3.915<-11739 Statuses=0008 0009 07:26:12 Msec=5250 True Az=112.995 Ze=3.915 Az status=0008 Ze status=0009 07:26:12 Check angles 07:26:12 SkyScan query 07:26:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:26:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:26:13 Message to Master queued w/err=0: serial=269448 error=0 07:26:18 Received message from Master: op=Filter serial=269449 07:26:18 Color wheel filter change from 0 to 0 07:26:18 FLIGetFilterPos err=0 currentPosition=0 07:26:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:18 Filter is already there-color wheel unchanged 07:26:18 Received message from Master: op=Shutter serial=269450 07:26:18 Shutter LASER close 07:26:18 Received message from Camera: op=State serial=269452 07:26:18 GetSingleValue result=40 Value=cccccccc 07:26:18 SkyScan query 07:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:19 Parameters OK 07:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:19 Set A/D data flow result=40 07:26:19 Set A/D channel type result=40 07:26:19 Set A/D encoding result=40 07:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:19 Set channel filter=0.000000e+000 result=40 07:26:19 Config A/D Result=40 07:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:19 Get A/D filter: -9.255963e+061 result=40 07:26:19 Get A/D value=-858993460 result=40 07:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:19 Parameters OK 07:26:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:19 Set A/D data flow result=40 07:26:19 Set A/D channel type result=40 07:26:19 Set A/D encoding result=40 07:26:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:19 Set channel filter=0.000000e+000 result=40 07:26:19 Config A/D Result=40 07:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:19 Get A/D filter: -9.255963e+061 result=40 07:26:19 Get A/D value=-858993460 result=40 07:26:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:19 Aux= 07:26:19 Message to Camera, serial 269452 queued 07:26:56 Received message from Master: op=PointingHead serial=269465 07:26:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:26:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:26:56 Point started: ret=0 07:26:56 point_skyscan result=0 07:26:57 Check angles 07:26:57 SkyScan query 07:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:26:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:26:57 Message to Master queued w/err=0: serial=269465 error=0 07:27:02 Received message from Master: op=Filter serial=269466 07:27:02 Color wheel filter change from 0 to 0 07:27:02 FLIGetFilterPos err=0 currentPosition=0 07:27:02 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:02 Filter is already there-color wheel unchanged 07:27:02 Received message from Master: op=Shutter serial=269467 07:27:02 Shutter LASER close 07:27:02 Received message from Camera: op=State serial=269469 07:27:02 GetSingleValue result=40 Value=cccccccc 07:27:02 SkyScan query 07:27:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:03 Parameters OK 07:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:03 Set A/D data flow result=40 07:27:03 Set A/D channel type result=40 07:27:03 Set A/D encoding result=40 07:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:03 Set channel filter=0.000000e+000 result=40 07:27:03 Config A/D Result=40 07:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:03 Get A/D filter: -9.255963e+061 result=40 07:27:03 Get A/D value=-858993460 result=40 07:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:03 Parameters OK 07:27:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:03 Set A/D data flow result=40 07:27:03 Set A/D channel type result=40 07:27:03 Set A/D encoding result=40 07:27:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:03 Set channel filter=0.000000e+000 result=40 07:27:03 Config A/D Result=40 07:27:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:03 Get A/D filter: -9.255963e+061 result=40 07:27:03 Get A/D value=-858993460 result=40 07:27:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:03 Aux= 07:27:03 Message to Camera, serial 269469 queued 07:27:40 Received message from Master: op=PointingHead serial=269482 07:27:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:27:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:27:40 Point started: ret=0 07:27:40 point_skyscan result=0 07:27:41 Check angles 07:27:41 SkyScan query 07:27:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:27:42 Message to Master queued w/err=0: serial=269482 error=0 07:27:47 Received message from Master: op=Filter serial=269483 07:27:47 Color wheel filter change from 0 to 0 07:27:47 FLIGetFilterPos err=0 currentPosition=0 07:27:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:47 Filter is already there-color wheel unchanged 07:27:47 Received message from Master: op=Shutter serial=269484 07:27:47 Shutter LASER close 07:27:47 Received message from Camera: op=State serial=269486 07:27:47 GetSingleValue result=40 Value=cccccccc 07:27:47 SkyScan query 07:27:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:27:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:47 Parameters OK 07:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:47 Set A/D data flow result=40 07:27:47 Set A/D channel type result=40 07:27:47 Set A/D encoding result=40 07:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:47 Set channel filter=0.000000e+000 result=40 07:27:47 Config A/D Result=40 07:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:47 Get A/D filter: -9.255963e+061 result=40 07:27:47 Get A/D value=-858993460 result=40 07:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:47 Parameters OK 07:27:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:47 Set A/D data flow result=40 07:27:47 Set A/D channel type result=40 07:27:47 Set A/D encoding result=40 07:27:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:47 Set channel filter=0.000000e+000 result=40 07:27:47 Config A/D Result=40 07:27:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:47 Get A/D filter: -9.255963e+061 result=40 07:27:47 Get A/D value=-858993460 result=40 07:27:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:47 Aux= 07:27:47 Message to Camera, serial 269486 queued 07:28:24 Received message from Master: op=PointingHead serial=269499 07:28:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:28:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:28:25 Point started: ret=0 07:28:25 point_skyscan result=0 07:28:25 Check angles 07:28:25 SkyScan query 07:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:28:26 Message to Master queued w/err=0: serial=269499 error=0 07:28:31 Received message from Master: op=Filter serial=269500 07:28:31 Color wheel filter change from 0 to 0 07:28:31 FLIGetFilterPos err=0 currentPosition=0 07:28:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:31 Filter is already there-color wheel unchanged 07:28:31 Received message from Master: op=Shutter serial=269501 07:28:31 Shutter LASER close 07:28:31 Received message from Camera: op=State serial=269503 07:28:31 GetSingleValue result=40 Value=cccccccc 07:28:31 SkyScan query 07:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:28:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:32 Parameters OK 07:28:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:32 Set A/D data flow result=40 07:28:32 Set A/D channel type result=40 07:28:32 Set A/D encoding result=40 07:28:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:32 Set channel filter=0.000000e+000 result=40 07:28:32 Config A/D Result=40 07:28:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:32 Get A/D filter: -9.255963e+061 result=40 07:28:32 Get A/D value=-858993460 result=40 07:28:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:32 Parameters OK 07:28:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:32 Set A/D data flow result=40 07:28:32 Set A/D channel type result=40 07:28:32 Set A/D encoding result=40 07:28:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:32 Set channel filter=0.000000e+000 result=40 07:28:32 Config A/D Result=40 07:28:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:32 Get A/D filter: -9.255963e+061 result=40 07:28:32 Get A/D value=-858993460 result=40 07:28:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:32 Aux= 07:28:32 Message to Camera, serial 269503 queued 07:29:09 Received message from Master: op=PointingHead serial=269516 07:29:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:09 Point started: ret=0 07:29:09 point_skyscan result=0 07:29:10 Check angles 07:29:10 SkyScan query 07:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 07:29:10 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 07:29:10 Check angles 07:29:10 SkyScan query 07:29:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.37<-14958 Statuses=0008 0009 07:29:11 Msec=750 True Az=112.995 Ze=-44.37 Az status=0008 Ze status=0009 07:29:11 Check angles 07:29:11 SkyScan query 07:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 07:29:12 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 07:29:12 Check angles 07:29:12 SkyScan query 07:29:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 07:29:12 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 07:29:13 Check angles 07:29:13 SkyScan query 07:29:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.19<-19146 Statuses=0008 0009 07:29:13 Msec=3000 True Az=112.995 Ze=-107.19 Az status=0008 Ze status=0009 07:29:13 Check angles 07:29:13 SkyScan query 07:29:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.16<-20544 Statuses=0008 0009 07:29:14 Msec=3750 True Az=112.995 Ze=-128.16 Az status=0008 Ze status=0009 07:29:14 Check angles 07:29:14 SkyScan query 07:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.13<-21942 Statuses=0008 0009 07:29:15 Msec=4500 True Az=112.995 Ze=-149.13 Az status=0008 Ze status=0009 07:29:15 Check angles 07:29:15 SkyScan query 07:29:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.07<-23338 Statuses=0008 0009 07:29:15 Msec=5250 True Az=112.995 Ze=-170.07 Az status=0008 Ze status=0009 07:29:16 Check angles 07:29:16 SkyScan query 07:29:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:29:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:29:16 Message to Master queued w/err=0: serial=269516 error=0 07:29:21 Received message from Master: op=Filter serial=269517 07:29:21 Color wheel filter change from 0 to 0 07:29:21 FLIGetFilterPos err=0 currentPosition=0 07:29:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:21 Filter is already there-color wheel unchanged 07:29:21 Received message from Master: op=Shutter serial=269518 07:29:21 Shutter LASER open 07:29:22 Received message from Camera: op=State serial=269520 07:29:22 GetSingleValue result=40 Value=cccccccc 07:29:22 SkyScan query 07:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:29:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:22 Parameters OK 07:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:22 Set A/D data flow result=40 07:29:22 Set A/D channel type result=40 07:29:22 Set A/D encoding result=40 07:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:22 Set channel filter=0.000000e+000 result=40 07:29:22 Config A/D Result=40 07:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:22 Get A/D filter: -9.255963e+061 result=40 07:29:22 Get A/D value=-858993460 result=40 07:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:22 Parameters OK 07:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:22 Set A/D data flow result=40 07:29:22 Set A/D channel type result=40 07:29:22 Set A/D encoding result=40 07:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:22 Set channel filter=0.000000e+000 result=40 07:29:22 Config A/D Result=40 07:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:22 Get A/D filter: -9.255963e+061 result=40 07:29:22 Get A/D value=-858993460 result=40 07:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:22 Aux= 07:29:22 Message to Camera, serial 269520 queued 07:29:31 Received message from Master: op=Shutter serial=269530 07:29:31 Shutter LASER close 07:29:31 Received message from Master: op=PointingHead serial=269534 07:29:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:29:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:29:32 Point started: ret=0 07:29:32 point_skyscan result=0 07:29:32 Check angles 07:29:32 SkyScan query 07:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 07:29:33 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 07:29:33 Check angles 07:29:33 SkyScan query 07:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 07:29:34 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 07:29:34 Check angles 07:29:34 SkyScan query 07:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 07:29:34 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 07:29:35 Check angles 07:29:35 SkyScan query 07:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.475<-17365 Statuses=0008 0009 07:29:35 Msec=2250 True Az=112.995 Ze=-80.475 Az status=0008 Ze status=0009 07:29:35 Check angles 07:29:35 SkyScan query 07:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 07:29:36 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 07:29:36 Check angles 07:29:36 SkyScan query 07:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.55<-14570 Statuses=0008 0009 07:29:37 Msec=3750 True Az=112.995 Ze=-38.55 Az status=0008 Ze status=0009 07:29:37 Check angles 07:29:37 SkyScan query 07:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 07:29:37 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 07:29:38 Check angles 07:29:38 SkyScan query 07:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=3.36<-11776 Statuses=0008 0009 07:29:38 Msec=5250 True Az=112.995 Ze=3.36 Az status=0008 Ze status=0009 07:29:38 Check angles 07:29:38 SkyScan query 07:29:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:29:39 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:29:39 Message to Master queued w/err=0: serial=269534 error=0 07:29:44 Received message from Master: op=Filter serial=269535 07:29:44 Color wheel filter change from 0 to 0 07:29:44 FLIGetFilterPos err=0 currentPosition=0 07:29:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:44 Filter is already there-color wheel unchanged 07:29:44 Received message from Master: op=Shutter serial=269536 07:29:44 Shutter LASER close 07:29:44 Received message from Camera: op=State serial=269538 07:29:44 GetSingleValue result=40 Value=cccccccc 07:29:44 SkyScan query 07:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:45 Parameters OK 07:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:45 Set A/D data flow result=40 07:29:45 Set A/D channel type result=40 07:29:45 Set A/D encoding result=40 07:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:45 Set channel filter=0.000000e+000 result=40 07:29:45 Config A/D Result=40 07:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:45 Get A/D filter: -9.255963e+061 result=40 07:29:45 Get A/D value=-858993460 result=40 07:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:45 Parameters OK 07:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:45 Set A/D data flow result=40 07:29:45 Set A/D channel type result=40 07:29:45 Set A/D encoding result=40 07:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:45 Set channel filter=0.000000e+000 result=40 07:29:45 Config A/D Result=40 07:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:45 Get A/D filter: -9.255963e+061 result=40 07:29:45 Get A/D value=-858993460 result=40 07:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:45 Aux= 07:29:45 Message to Camera, serial 269538 queued 07:30:22 Received message from Master: op=PointingHead serial=269551 07:30:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:30:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:30:22 Point started: ret=0 07:30:22 point_skyscan result=0 07:30:23 Check angles 07:30:23 SkyScan query 07:30:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:30:23 Message to Master queued w/err=0: serial=269551 error=0 07:30:28 Received message from Master: op=Filter serial=269552 07:30:28 Color wheel filter change from 0 to 0 07:30:28 FLIGetFilterPos err=0 currentPosition=0 07:30:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:28 Filter is already there-color wheel unchanged 07:30:28 Received message from Master: op=Shutter serial=269553 07:30:28 Shutter LASER close 07:30:29 Received message from Camera: op=State serial=269555 07:30:29 GetSingleValue result=40 Value=cccccccc 07:30:29 SkyScan query 07:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:30:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:29 Parameters OK 07:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:29 Set A/D data flow result=40 07:30:29 Set A/D channel type result=40 07:30:29 Set A/D encoding result=40 07:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:29 Set channel filter=0.000000e+000 result=40 07:30:29 Config A/D Result=40 07:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:29 Get A/D filter: -9.255963e+061 result=40 07:30:29 Get A/D value=-858993460 result=40 07:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:29 Parameters OK 07:30:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:29 Set A/D data flow result=40 07:30:29 Set A/D channel type result=40 07:30:29 Set A/D encoding result=40 07:30:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:29 Set channel filter=0.000000e+000 result=40 07:30:29 Config A/D Result=40 07:30:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:29 Get A/D filter: -9.255963e+061 result=40 07:30:29 Get A/D value=-858993460 result=40 07:30:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:29 Aux= 07:30:29 Message to Camera, serial 269555 queued 07:31:06 Received message from Master: op=PointingHead serial=269568 07:31:06 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:31:06 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:31:06 Point started: ret=0 07:31:06 point_skyscan result=0 07:31:07 Check angles 07:31:07 SkyScan query 07:31:08 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 07:31:08 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 07:31:08 Check angles 07:31:08 SkyScan query 07:31:08 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 07:31:08 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 07:31:09 Check angles 07:31:09 SkyScan query 07:31:09 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 07:31:09 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 07:31:09 Check angles 07:31:09 SkyScan query 07:31:10 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:31:10 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:31:10 Message to Master queued w/err=0: serial=269568 error=0 07:31:15 Received message from Master: op=Filter serial=269569 07:31:15 Color wheel filter change from 0 to 0 07:31:15 FLIGetFilterPos err=0 currentPosition=0 07:31:15 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:15 Filter is already there-color wheel unchanged 07:31:15 Received message from Master: op=Shutter serial=269570 07:31:15 Shutter LASER close 07:31:15 Received message from Camera: op=State serial=269572 07:31:15 GetSingleValue result=40 Value=cccccccc 07:31:15 SkyScan query 07:31:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:31:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:16 Parameters OK 07:31:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:16 Set A/D data flow result=40 07:31:16 Set A/D channel type result=40 07:31:16 Set A/D encoding result=40 07:31:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:16 Set channel filter=0.000000e+000 result=40 07:31:16 Config A/D Result=40 07:31:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:16 Get A/D filter: -9.255963e+061 result=40 07:31:16 Get A/D value=-858993460 result=40 07:31:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:16 Parameters OK 07:31:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:16 Set A/D data flow result=40 07:31:16 Set A/D channel type result=40 07:31:16 Set A/D encoding result=40 07:31:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:16 Set channel filter=0.000000e+000 result=40 07:31:16 Config A/D Result=40 07:31:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:16 Get A/D filter: -9.255963e+061 result=40 07:31:16 Get A/D value=-858993460 result=40 07:31:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:16 Aux= 07:31:16 Message to Camera, serial 269572 queued 07:31:52 Received message from Master: op=PointingHead serial=269585 07:31:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:31:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:31:53 Point started: ret=0 07:31:53 point_skyscan result=0 07:31:54 Check angles 07:31:54 SkyScan query 07:31:54 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 07:31:54 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 07:31:54 Check angles 07:31:54 SkyScan query 07:31:55 SkyScan query done: ret=0 az=135.765<-9051 ze=6.495<-11567 Statuses=0009 0008 07:31:55 Msec=750 True Az=135.765 Ze=6.495 Az status=0009 Ze status=0008 07:31:55 Check angles 07:31:55 SkyScan query 07:31:56 SkyScan query done: ret=0 az=118.32<-7888 ze=6.495<-11567 Statuses=0009 0008 07:31:56 Msec=1500 True Az=118.32 Ze=6.495 Az status=0009 Ze status=0008 07:31:56 Check angles 07:31:56 SkyScan query 07:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:31:56 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:31:56 Message to Master queued w/err=0: serial=269585 error=0 07:32:01 Received message from Master: op=Filter serial=269586 07:32:01 Color wheel filter change from 0 to 0 07:32:01 FLIGetFilterPos err=0 currentPosition=0 07:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:01 Filter is already there-color wheel unchanged 07:32:02 Received message from Master: op=Shutter serial=269587 07:32:02 Shutter LASER close 07:32:02 Received message from Camera: op=State serial=269589 07:32:02 GetSingleValue result=40 Value=cccccccc 07:32:02 SkyScan query 07:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:02 Parameters OK 07:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:02 Set A/D data flow result=40 07:32:02 Set A/D channel type result=40 07:32:02 Set A/D encoding result=40 07:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:02 Set channel filter=0.000000e+000 result=40 07:32:02 Config A/D Result=40 07:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:02 Get A/D filter: -9.255963e+061 result=40 07:32:02 Get A/D value=-858993460 result=40 07:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:02 Parameters OK 07:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:02 Set A/D data flow result=40 07:32:02 Set A/D channel type result=40 07:32:02 Set A/D encoding result=40 07:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:02 Set channel filter=0.000000e+000 result=40 07:32:02 Config A/D Result=40 07:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:02 Get A/D filter: -9.255963e+061 result=40 07:32:02 Get A/D value=-858993460 result=40 07:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:02 Aux= 07:32:02 Message to Camera, serial 269589 queued 07:32:38 Received message from Master: op=PointingHead serial=269601 07:32:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:32:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:32:38 Point started: ret=0 07:32:38 point_skyscan result=0 07:32:39 Check angles 07:32:39 SkyScan query 07:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 07:32:40 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 07:32:40 Check angles 07:32:40 SkyScan query 07:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 07:32:40 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 07:32:41 Check angles 07:32:41 SkyScan query 07:32:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 07:32:41 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 07:32:41 Check angles 07:32:41 SkyScan query 07:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 07:32:42 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 07:32:42 Check angles 07:32:42 SkyScan query 07:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 07:32:43 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 07:32:43 Check angles 07:32:43 SkyScan query 07:32:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.55<-20570 Statuses=0008 0009 07:32:43 Msec=3750 True Az=112.995 Ze=-128.55 Az status=0008 Ze status=0009 07:32:44 Check angles 07:32:44 SkyScan query 07:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.55<-21970 Statuses=0008 0009 07:32:44 Msec=4500 True Az=112.995 Ze=-149.55 Az status=0008 Ze status=0009 07:32:44 Check angles 07:32:44 SkyScan query 07:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.475<-23365 Statuses=0008 0009 07:32:45 Msec=5250 True Az=112.995 Ze=-170.475 Az status=0008 Ze status=0009 07:32:45 Check angles 07:32:45 SkyScan query 07:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:32:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:32:46 Message to Master queued w/err=0: serial=269601 error=0 07:32:51 Received message from Master: op=Filter serial=269602 07:32:51 Color wheel filter change from 0 to 0 07:32:51 FLIGetFilterPos err=0 currentPosition=0 07:32:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:51 Filter is already there-color wheel unchanged 07:32:51 Received message from Master: op=Shutter serial=269603 07:32:51 Shutter LASER open 07:32:51 Received message from Camera: op=State serial=269605 07:32:51 GetSingleValue result=40 Value=cccccccc 07:32:51 SkyScan query 07:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:52 Parameters OK 07:32:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:52 Set A/D data flow result=40 07:32:52 Set A/D channel type result=40 07:32:52 Set A/D encoding result=40 07:32:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:52 Set channel filter=0.000000e+000 result=40 07:32:52 Config A/D Result=40 07:32:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:52 Get A/D filter: -9.255963e+061 result=40 07:32:52 Get A/D value=-858993460 result=40 07:32:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:52 Parameters OK 07:32:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:52 Set A/D data flow result=40 07:32:52 Set A/D channel type result=40 07:32:52 Set A/D encoding result=40 07:32:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:52 Set channel filter=0.000000e+000 result=40 07:32:52 Config A/D Result=40 07:32:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:52 Get A/D filter: -9.255963e+061 result=40 07:32:52 Get A/D value=-858993460 result=40 07:32:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:52 Aux= 07:32:52 Message to Camera, serial 269605 queued 07:32:59 Received message from Master: op=Shutter serial=269614 07:32:59 Shutter LASER close 07:33:00 Received message from Master: op=PointingHead serial=269618 07:33:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:00 Point started: ret=0 07:33:00 point_skyscan result=0 07:33:01 Check angles 07:33:01 SkyScan query 07:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 07:33:01 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 07:33:01 Check angles 07:33:01 SkyScan query 07:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 07:33:02 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 07:33:02 Check angles 07:33:02 SkyScan query 07:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 07:33:03 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 07:33:03 Check angles 07:33:03 SkyScan query 07:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 07:33:04 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 07:33:04 Check angles 07:33:04 SkyScan query 07:33:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.815<-15921 Statuses=0008 0009 07:33:04 Msec=3000 True Az=112.995 Ze=-58.815 Az status=0008 Ze status=0009 07:33:04 Check angles 07:33:04 SkyScan query 07:33:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 07:33:05 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 07:33:05 Check angles 07:33:05 SkyScan query 07:33:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 07:33:06 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 07:33:06 Check angles 07:33:06 SkyScan query 07:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 07:33:07 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 07:33:07 Check angles 07:33:07 SkyScan query 07:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:33:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:33:07 Message to Master queued w/err=0: serial=269618 error=0 07:33:12 Received message from Master: op=Filter serial=269619 07:33:12 Color wheel filter change from 0 to 0 07:33:12 FLIGetFilterPos err=0 currentPosition=0 07:33:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:12 Filter is already there-color wheel unchanged 07:33:12 Received message from Master: op=Shutter serial=269620 07:33:12 Shutter LASER close 07:33:13 Received message from Camera: op=State serial=269622 07:33:13 GetSingleValue result=40 Value=cccccccc 07:33:13 SkyScan query 07:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:13 Parameters OK 07:33:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:13 Set A/D data flow result=40 07:33:13 Set A/D channel type result=40 07:33:13 Set A/D encoding result=40 07:33:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:13 Set channel filter=0.000000e+000 result=40 07:33:13 Config A/D Result=40 07:33:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:13 Get A/D filter: -9.255963e+061 result=40 07:33:13 Get A/D value=-858993460 result=40 07:33:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:13 Parameters OK 07:33:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:13 Set A/D data flow result=40 07:33:13 Set A/D channel type result=40 07:33:13 Set A/D encoding result=40 07:33:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:13 Set channel filter=0.000000e+000 result=40 07:33:13 Config A/D Result=40 07:33:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:13 Get A/D filter: -9.255963e+061 result=40 07:33:13 Get A/D value=-858993460 result=40 07:33:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:13 Aux= 07:33:13 Message to Camera, serial 269622 queued 07:33:35 Received message from Master: op=Identify serial=269623 07:33:50 Received message from Master: op=PointingHead serial=269638 07:33:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:33:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:33:50 Point started: ret=0 07:33:50 point_skyscan result=0 07:33:51 Check angles 07:33:51 SkyScan query 07:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:33:52 Message to Master queued w/err=0: serial=269638 error=0 07:33:57 Received message from Master: op=Filter serial=269639 07:33:57 Color wheel filter change from 0 to 0 07:33:57 FLIGetFilterPos err=0 currentPosition=0 07:33:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:57 Filter is already there-color wheel unchanged 07:33:57 Received message from Master: op=Shutter serial=269640 07:33:57 Shutter LASER close 07:33:57 Received message from Camera: op=State serial=269642 07:33:57 GetSingleValue result=40 Value=cccccccc 07:33:57 SkyScan query 07:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:33:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:58 Parameters OK 07:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:58 Set A/D data flow result=40 07:33:58 Set A/D channel type result=40 07:33:58 Set A/D encoding result=40 07:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:58 Set channel filter=0.000000e+000 result=40 07:33:58 Config A/D Result=40 07:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:58 Get A/D filter: -9.255963e+061 result=40 07:33:58 Get A/D value=-858993460 result=40 07:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:58 Parameters OK 07:33:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:58 Set A/D data flow result=40 [UTC 2019-3-14 07:33:58] 07:33:58 Set A/D channel type result=40 07:33:58 Set A/D encoding result=40 07:33:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:58 Set channel filter=0.000000e+000 result=40 07:33:58 Config A/D Result=40 07:33:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:58 Get A/D filter: -9.255963e+061 result=40 07:33:58 Get A/D value=-858993460 result=40 07:33:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:58 Aux= 07:33:58 Message to Camera, serial 269642 queued 07:34:34 Received message from Master: op=PointingHead serial=269655 07:34:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:34:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:34:35 Point started: ret=0 07:34:35 point_skyscan result=0 07:34:35 Check angles 07:34:35 SkyScan query 07:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:34:36 Message to Master queued w/err=0: serial=269655 error=0 07:34:41 Received message from Master: op=Filter serial=269656 07:34:41 Color wheel filter change from 0 to 0 07:34:41 FLIGetFilterPos err=0 currentPosition=0 07:34:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:41 Filter is already there-color wheel unchanged 07:34:41 Received message from Master: op=Shutter serial=269657 07:34:41 Shutter LASER close 07:34:41 Received message from Camera: op=State serial=269659 07:34:41 GetSingleValue result=40 Value=cccccccc 07:34:41 SkyScan query 07:34:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:42 Parameters OK 07:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:42 Set A/D data flow result=40 07:34:42 Set A/D channel type result=40 07:34:42 Set A/D encoding result=40 07:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:42 Set channel filter=0.000000e+000 result=40 07:34:42 Config A/D Result=40 07:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:42 Get A/D filter: -9.255963e+061 result=40 07:34:42 Get A/D value=-858993460 result=40 07:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:42 Parameters OK 07:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:42 Set A/D data flow result=40 07:34:42 Set A/D channel type result=40 07:34:42 Set A/D encoding result=40 07:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:42 Set channel filter=0.000000e+000 result=40 07:34:42 Config A/D Result=40 07:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:42 Get A/D filter: -9.255963e+061 result=40 07:34:42 Get A/D value=-858993460 result=40 07:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:42 Aux= 07:34:42 Message to Camera, serial 269659 queued 07:35:19 Received message from Master: op=PointingHead serial=269672 07:35:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:35:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:35:19 Point started: ret=0 07:35:19 point_skyscan result=0 07:35:20 Check angles 07:35:20 SkyScan query 07:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:35:20 Message to Master queued w/err=0: serial=269672 error=0 07:35:25 Received message from Master: op=Filter serial=269673 07:35:25 Color wheel filter change from 0 to 0 07:35:25 FLIGetFilterPos err=0 currentPosition=0 07:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:25 Filter is already there-color wheel unchanged 07:35:26 Received message from Master: op=Shutter serial=269674 07:35:26 Shutter LASER close 07:35:26 Received message from Camera: op=State serial=269676 07:35:26 GetSingleValue result=40 Value=cccccccc 07:35:26 SkyScan query 07:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:26 Parameters OK 07:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:26 Set A/D data flow result=40 07:35:26 Set A/D channel type result=40 07:35:26 Set A/D encoding result=40 07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:26 Set channel filter=0.000000e+000 result=40 07:35:26 Config A/D Result=40 07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:26 Get A/D filter: -9.255963e+061 result=40 07:35:26 Get A/D value=-858993460 result=40 07:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:26 Parameters OK 07:35:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:26 Set A/D data flow result=40 07:35:26 Set A/D channel type result=40 07:35:26 Set A/D encoding result=40 07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:26 Set channel filter=0.000000e+000 result=40 07:35:26 Config A/D Result=40 07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:26 Get A/D filter: -9.255963e+061 result=40 07:35:26 Get A/D value=-858993460 result=40 07:35:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:26 Aux= 07:35:26 Message to Camera, serial 269676 queued 07:36:03 Received message from Master: op=PointingHead serial=269689 07:36:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:36:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:36:03 Point started: ret=0 07:36:03 point_skyscan result=0 07:36:04 Check angles 07:36:04 SkyScan query 07:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 07:36:05 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 07:36:05 Check angles 07:36:05 SkyScan query 07:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.37<-14958 Statuses=0008 0009 07:36:05 Msec=750 True Az=112.995 Ze=-44.37 Az status=0008 Ze status=0009 07:36:06 Check angles 07:36:06 SkyScan query 07:36:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 07:36:06 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 07:36:06 Check angles 07:36:06 SkyScan query 07:36:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 07:36:07 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 07:36:07 Check angles 07:36:07 SkyScan query 07:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.175<-19145 Statuses=0008 0009 07:36:08 Msec=3000 True Az=112.995 Ze=-107.175 Az status=0008 Ze status=0009 07:36:08 Check angles 07:36:08 SkyScan query 07:36:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.16<-20544 Statuses=0008 0009 07:36:08 Msec=3750 True Az=112.995 Ze=-128.16 Az status=0008 Ze status=0009 07:36:09 Check angles 07:36:09 SkyScan query 07:36:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.145<-21943 Statuses=0008 0009 07:36:09 Msec=4500 True Az=112.995 Ze=-149.145 Az status=0008 Ze status=0009 07:36:09 Check angles 07:36:09 SkyScan query 07:36:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.085<-23339 Statuses=0008 0009 07:36:10 Msec=5250 True Az=112.995 Ze=-170.085 Az status=0008 Ze status=0009 07:36:10 Check angles 07:36:10 SkyScan query 07:36:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:36:11 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:36:11 Message to Master queued w/err=0: serial=269689 error=0 07:36:16 Received message from Master: op=Filter serial=269690 07:36:16 Color wheel filter change from 0 to 0 07:36:16 FLIGetFilterPos err=0 currentPosition=0 07:36:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:16 Filter is already there-color wheel unchanged 07:36:16 Received message from Master: op=Shutter serial=269691 07:36:16 Shutter LASER open 07:36:16 Received message from Camera: op=State serial=269693 07:36:16 GetSingleValue result=40 Value=cccccccc 07:36:16 SkyScan query 07:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:36:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:17 Parameters OK 07:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:17 Set A/D data flow result=40 07:36:17 Set A/D channel type result=40 07:36:17 Set A/D encoding result=40 07:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:17 Set channel filter=0.000000e+000 result=40 07:36:17 Config A/D Result=40 07:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:17 Get A/D filter: -9.255963e+061 result=40 07:36:17 Get A/D value=-858993460 result=40 07:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:17 Parameters OK 07:36:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:17 Set A/D data flow result=40 07:36:17 Set A/D channel type result=40 07:36:17 Set A/D encoding result=40 07:36:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:17 Set channel filter=0.000000e+000 result=40 07:36:17 Config A/D Result=40 07:36:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:17 Get A/D filter: -9.255963e+061 result=40 07:36:17 Get A/D value=-858993460 result=40 07:36:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:17 Aux= 07:36:17 Message to Camera, serial 269693 queued 07:36:25 Received message from Master: op=Shutter serial=269703 07:36:25 Shutter LASER close 07:36:26 Received message from Master: op=PointingHead serial=269707 07:36:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:36:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:36:26 Point started: ret=0 07:36:26 point_skyscan result=0 07:36:27 Check angles 07:36:27 SkyScan query 07:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 07:36:27 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 07:36:27 Check angles 07:36:27 SkyScan query 07:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.83<-20122 Statuses=0008 0009 07:36:28 Msec=750 True Az=112.995 Ze=-121.83 Az status=0008 Ze status=0009 07:36:28 Check angles 07:36:28 SkyScan query 07:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 07:36:29 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 07:36:29 Check angles 07:36:29 SkyScan query 07:36:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 07:36:29 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 07:36:30 Check angles 07:36:30 SkyScan query 07:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 07:36:30 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 07:36:30 Check angles 07:36:30 SkyScan query 07:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 07:36:31 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 07:36:31 Check angles 07:36:31 SkyScan query 07:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.62<-13108 Statuses=0008 0009 07:36:32 Msec=4500 True Az=112.995 Ze=-16.62 Az status=0008 Ze status=0009 07:36:32 Check angles 07:36:32 SkyScan query 07:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 07:36:32 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 07:36:33 Check angles 07:36:33 SkyScan query 07:36:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:36:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:36:33 Message to Master queued w/err=0: serial=269707 error=0 07:36:38 Received message from Master: op=Filter serial=269708 07:36:38 Color wheel filter change from 0 to 0 07:36:38 FLIGetFilterPos err=0 currentPosition=0 07:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:38 Filter is already there-color wheel unchanged 07:36:38 Received message from Master: op=Shutter serial=269709 07:36:38 Shutter LASER close 07:36:39 Received message from Camera: op=State serial=269711 07:36:39 GetSingleValue result=40 Value=cccccccc 07:36:39 SkyScan query 07:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:39 Parameters OK 07:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:39 Set A/D data flow result=40 07:36:39 Set A/D channel type result=40 07:36:39 Set A/D encoding result=40 07:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:39 Set channel filter=0.000000e+000 result=40 07:36:39 Config A/D Result=40 07:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:39 Get A/D filter: -9.255963e+061 result=40 07:36:39 Get A/D value=-858993460 result=40 07:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:39 Parameters OK 07:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:39 Set A/D data flow result=40 07:36:39 Set A/D channel type result=40 07:36:39 Set A/D encoding result=40 07:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:39 Set channel filter=0.000000e+000 result=40 07:36:39 Config A/D Result=40 07:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:39 Get A/D filter: -9.255963e+061 result=40 07:36:39 Get A/D value=-858993460 result=40 07:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:39 Aux= 07:36:39 Message to Camera, serial 269711 queued 07:37:16 Received message from Master: op=PointingHead serial=269724 07:37:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:37:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:37:16 Point started: ret=0 07:37:16 point_skyscan result=0 07:37:17 Check angles 07:37:17 SkyScan query 07:37:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:37:18 Message to Master queued w/err=0: serial=269724 error=0 07:37:23 Received message from Master: op=Filter serial=269725 07:37:23 Color wheel filter change from 0 to 0 07:37:23 FLIGetFilterPos err=0 currentPosition=0 07:37:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:23 Filter is already there-color wheel unchanged 07:37:23 Received message from Master: op=Shutter serial=269726 07:37:23 Shutter LASER close 07:37:23 Received message from Camera: op=State serial=269728 07:37:23 GetSingleValue result=40 Value=cccccccc 07:37:23 SkyScan query 07:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:37:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:24 Parameters OK 07:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:24 Set A/D data flow result=40 07:37:24 Set A/D channel type result=40 07:37:24 Set A/D encoding result=40 07:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:24 Set channel filter=0.000000e+000 result=40 07:37:24 Config A/D Result=40 07:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:24 Get A/D filter: -9.255963e+061 result=40 07:37:24 Get A/D value=-858993460 result=40 07:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:24 Parameters OK 07:37:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:24 Set A/D data flow result=40 07:37:24 Set A/D channel type result=40 07:37:24 Set A/D encoding result=40 07:37:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:24 Set channel filter=0.000000e+000 result=40 07:37:24 Config A/D Result=40 07:37:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:24 Get A/D filter: -9.255963e+061 result=40 07:37:24 Get A/D value=-858993460 result=40 07:37:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:24 Aux= 07:37:24 Message to Camera, serial 269728 queued 07:38:00 Received message from Master: op=PointingHead serial=269741 07:38:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:38:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:38:01 Point started: ret=0 07:38:01 point_skyscan result=0 07:38:02 Check angles 07:38:02 SkyScan query 07:38:02 SkyScan query done: ret=0 az=136.245<-9083 ze=-6.51<-12434 Statuses=0009 0008 07:38:02 Msec=0 True Az=136.245 Ze=-6.51 Az status=0009 Ze status=0008 07:38:02 Check angles 07:38:02 SkyScan query 07:38:03 SkyScan query done: ret=0 az=153.69<-10246 ze=-6.495<-12433 Statuses=0009 0008 07:38:03 Msec=750 True Az=153.69 Ze=-6.495 Az status=0009 Ze status=0008 07:38:03 Check angles 07:38:03 SkyScan query 07:38:04 SkyScan query done: ret=0 az=171.15<-11410 ze=-6.495<-12433 Statuses=0009 0008 07:38:04 Msec=1500 True Az=171.15 Ze=-6.495 Az status=0009 Ze status=0008 07:38:04 Check angles 07:38:04 SkyScan query 07:38:04 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:38:04 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:38:04 Message to Master queued w/err=0: serial=269741 error=0 07:38:09 Received message from Master: op=Filter serial=269742 07:38:09 Color wheel filter change from 0 to 0 07:38:09 FLIGetFilterPos err=0 currentPosition=0 07:38:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:09 Filter is already there-color wheel unchanged 07:38:10 Received message from Master: op=Shutter serial=269743 07:38:10 Shutter LASER close 07:38:10 Received message from Camera: op=State serial=269745 07:38:10 GetSingleValue result=40 Value=cccccccc 07:38:10 SkyScan query 07:38:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:38:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:10 Parameters OK 07:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:10 Set A/D data flow result=40 07:38:10 Set A/D channel type result=40 07:38:10 Set A/D encoding result=40 07:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:10 Set channel filter=0.000000e+000 result=40 07:38:10 Config A/D Result=40 07:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:10 Get A/D filter: -9.255963e+061 result=40 07:38:10 Get A/D value=-858993460 result=40 07:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:10 Parameters OK 07:38:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:10 Set A/D data flow result=40 07:38:10 Set A/D channel type result=40 07:38:10 Set A/D encoding result=40 07:38:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:10 Set channel filter=0.000000e+000 result=40 07:38:10 Config A/D Result=40 07:38:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:10 Get A/D filter: -9.255963e+061 result=40 07:38:10 Get A/D value=-858993460 result=40 07:38:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:10 Aux= 07:38:10 Message to Camera, serial 269745 queued 07:38:47 Received message from Master: op=PointingHead serial=269758 07:38:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:38:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:38:47 Point started: ret=0 07:38:47 point_skyscan result=0 07:38:48 Check angles 07:38:48 SkyScan query 07:38:49 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 07:38:49 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 07:38:49 Check angles 07:38:49 SkyScan query 07:38:49 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 07:38:49 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 07:38:50 Check angles 07:38:50 SkyScan query 07:38:50 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 07:38:50 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 07:38:50 Check angles 07:38:50 SkyScan query 07:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:38:51 Message to Master queued w/err=0: serial=269758 error=0 07:38:56 Received message from Master: op=Filter serial=269759 07:38:56 Color wheel filter change from 0 to 0 07:38:56 FLIGetFilterPos err=0 currentPosition=0 07:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:56 Filter is already there-color wheel unchanged 07:38:56 Received message from Master: op=Shutter serial=269760 07:38:56 Shutter LASER close 07:38:56 Received message from Camera: op=State serial=269762 07:38:56 GetSingleValue result=40 Value=cccccccc 07:38:56 SkyScan query 07:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:57 Parameters OK 07:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:57 Set A/D data flow result=40 07:38:57 Set A/D channel type result=40 07:38:57 Set A/D encoding result=40 07:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:57 Set channel filter=0.000000e+000 result=40 07:38:57 Config A/D Result=40 07:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:57 Get A/D filter: -9.255963e+061 result=40 07:38:57 Get A/D value=-858993460 result=40 07:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:57 Parameters OK 07:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:57 Set A/D data flow result=40 07:38:57 Set A/D channel type result=40 07:38:57 Set A/D encoding result=40 07:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:57 Set channel filter=0.000000e+000 result=40 07:38:57 Config A/D Result=40 07:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:57 Get A/D filter: -9.255963e+061 result=40 07:38:57 Get A/D value=-858993460 result=40 07:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:57 Aux= 07:38:57 Message to Camera, serial 269762 queued 07:39:33 Received message from Master: op=PointingHead serial=269775 07:39:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:39:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:39:34 Point started: ret=0 07:39:34 point_skyscan result=0 07:39:35 Check angles 07:39:35 SkyScan query 07:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 07:39:35 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 07:39:35 Check angles 07:39:35 SkyScan query 07:39:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 07:39:36 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 07:39:36 Check angles 07:39:36 SkyScan query 07:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.295<-16353 Statuses=0008 0009 07:39:37 Msec=1500 True Az=112.995 Ze=-65.295 Az status=0008 Ze status=0009 07:39:37 Check angles 07:39:37 SkyScan query 07:39:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 07:39:37 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 07:39:38 Check angles 07:39:38 SkyScan query 07:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 07:39:38 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 07:39:38 Check angles 07:39:38 SkyScan query 07:39:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 07:39:39 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 07:39:39 Check angles 07:39:39 SkyScan query 07:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 07:39:40 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 07:39:40 Check angles 07:39:40 SkyScan query 07:39:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 07:39:40 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 07:39:41 Check angles 07:39:41 SkyScan query 07:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:39:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:39:41 Message to Master queued w/err=0: serial=269775 error=0 07:39:46 Received message from Master: op=Filter serial=269776 07:39:46 Color wheel filter change from 0 to 0 07:39:46 FLIGetFilterPos err=0 currentPosition=0 07:39:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:46 Filter is already there-color wheel unchanged 07:39:46 Received message from Master: op=Shutter serial=269777 07:39:46 Shutter LASER open 07:39:47 Received message from Camera: op=State serial=269779 07:39:47 GetSingleValue result=40 Value=cccccccc 07:39:47 SkyScan query 07:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:39:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:47 Parameters OK 07:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:47 Set A/D data flow result=40 07:39:47 Set A/D channel type result=40 07:39:47 Set A/D encoding result=40 07:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:47 Set channel filter=0.000000e+000 result=40 07:39:47 Config A/D Result=40 07:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:47 Get A/D filter: -9.255963e+061 result=40 07:39:47 Get A/D value=-858993460 result=40 07:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:47 Parameters OK 07:39:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:47 Set A/D data flow result=40 07:39:47 Set A/D channel type result=40 07:39:47 Set A/D encoding result=40 07:39:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:47 Set channel filter=0.000000e+000 result=40 07:39:47 Config A/D Result=40 07:39:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:47 Get A/D filter: -9.255963e+061 result=40 07:39:47 Get A/D value=-858993460 result=40 07:39:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:47 Aux= 07:39:47 Message to Camera, serial 269779 queued 07:39:56 Received message from Master: op=Shutter serial=269789 07:39:56 Shutter LASER close 07:39:56 Received message from Master: op=PointingHead serial=269793 07:39:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:39:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:39:56 Point started: ret=0 07:39:56 point_skyscan result=0 07:39:57 Check angles 07:39:57 SkyScan query 07:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 07:39:58 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 07:39:58 Check angles 07:39:58 SkyScan query 07:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.25<-20150 Statuses=0008 0009 07:39:58 Msec=750 True Az=112.995 Ze=-122.25 Az status=0008 Ze status=0009 07:39:59 Check angles 07:39:59 SkyScan query 07:39:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 07:39:59 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 07:39:59 Check angles 07:39:59 SkyScan query 07:40:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 07:40:00 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 07:40:00 Check angles 07:40:00 SkyScan query 07:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 07:40:01 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 07:40:01 Check angles 07:40:01 SkyScan query 07:40:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 07:40:01 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 07:40:02 Check angles 07:40:02 SkyScan query 07:40:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 07:40:02 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 07:40:02 Check angles 07:40:02 SkyScan query 07:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 07:40:03 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 07:40:03 Check angles 07:40:03 SkyScan query 07:40:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:40:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:40:04 Message to Master queued w/err=0: serial=269793 error=0 07:40:09 Received message from Master: op=Filter serial=269794 07:40:09 Color wheel filter change from 0 to 0 07:40:09 FLIGetFilterPos err=0 currentPosition=0 07:40:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:09 Filter is already there-color wheel unchanged 07:40:09 Received message from Master: op=Shutter serial=269795 07:40:09 Shutter LASER close 07:40:09 Received message from Camera: op=State serial=269797 07:40:09 GetSingleValue result=40 Value=cccccccc 07:40:09 SkyScan query 07:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:10 Parameters OK 07:40:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:10 Set A/D data flow result=40 07:40:10 Set A/D channel type result=40 07:40:10 Set A/D encoding result=40 07:40:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:10 Set channel filter=0.000000e+000 result=40 07:40:10 Config A/D Result=40 07:40:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:10 Get A/D filter: -9.255963e+061 result=40 07:40:10 Get A/D value=-858993460 result=40 07:40:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:10 Parameters OK 07:40:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:10 Set A/D data flow result=40 07:40:10 Set A/D channel type result=40 07:40:10 Set A/D encoding result=40 07:40:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:10 Set channel filter=0.000000e+000 result=40 07:40:10 Config A/D Result=40 07:40:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:10 Get A/D filter: -9.255963e+061 result=40 07:40:10 Get A/D value=-858993460 result=40 07:40:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:10 Aux= 07:40:10 Message to Camera, serial 269797 queued 07:40:46 Received message from Master: op=PointingHead serial=269810 07:40:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:40:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:40:47 Point started: ret=0 07:40:47 point_skyscan result=0 07:40:48 Check angles 07:40:48 SkyScan query 07:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:40:48 Message to Master queued w/err=0: serial=269810 error=0 07:40:53 Received message from Master: op=Filter serial=269811 07:40:53 Color wheel filter change from 0 to 0 07:40:53 FLIGetFilterPos err=0 currentPosition=0 07:40:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:53 Filter is already there-color wheel unchanged 07:40:53 Received message from Master: op=Shutter serial=269812 07:40:53 Shutter LASER close 07:40:53 Received message from Camera: op=State serial=269814 07:40:53 GetSingleValue result=40 Value=cccccccc 07:40:53 SkyScan query 07:40:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:40:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:54 Parameters OK 07:40:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:54 Set A/D data flow result=40 07:40:54 Set A/D channel type result=40 07:40:54 Set A/D encoding result=40 07:40:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:54 Set channel filter=0.000000e+000 result=40 07:40:54 Config A/D Result=40 07:40:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:54 Get A/D filter: -9.255963e+061 result=40 07:40:54 Get A/D value=-858993460 result=40 07:40:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:54 Parameters OK 07:40:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:54 Set A/D data flow result=40 07:40:54 Set A/D channel type result=40 07:40:54 Set A/D encoding result=40 07:40:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:54 Set channel filter=0.000000e+000 result=40 07:40:54 Config A/D Result=40 07:40:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:54 Get A/D filter: -9.255963e+061 result=40 07:40:54 Get A/D value=-858993460 result=40 07:40:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:54 Aux= 07:40:54 Message to Camera, serial 269814 queued 07:41:31 Received message from Master: op=PointingHead serial=269827 07:41:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:41:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:41:31 Point started: ret=0 07:41:31 point_skyscan result=0 07:41:32 Check angles 07:41:32 SkyScan query 07:41:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:41:32 Message to Master queued w/err=0: serial=269827 error=0 07:41:37 Received message from Master: op=Filter serial=269828 07:41:37 Color wheel filter change from 0 to 0 07:41:37 FLIGetFilterPos err=0 currentPosition=0 07:41:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:37 Filter is already there-color wheel unchanged 07:41:38 Received message from Master: op=Shutter serial=269829 07:41:38 Shutter LASER close 07:41:38 Received message from Camera: op=State serial=269831 07:41:38 GetSingleValue result=40 Value=cccccccc 07:41:38 SkyScan query 07:41:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:41:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:38 Parameters OK 07:41:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:38 Set A/D data flow result=40 07:41:38 Set A/D channel type result=40 07:41:38 Set A/D encoding result=40 07:41:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:38 Set channel filter=0.000000e+000 result=40 07:41:38 Config A/D Result=40 07:41:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:38 Get A/D filter: -9.255963e+061 result=40 07:41:38 Get A/D value=-858993460 result=40 07:41:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:38 Parameters OK 07:41:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:38 Set A/D data flow result=40 07:41:38 Set A/D channel type result=40 07:41:38 Set A/D encoding result=40 07:41:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:38 Set channel filter=0.000000e+000 result=40 07:41:38 Config A/D Result=40 07:41:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:38 Get A/D filter: -9.255963e+061 result=40 07:41:38 Get A/D value=-858993460 result=40 07:41:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:38 Aux= 07:41:38 Message to Camera, serial 269831 queued 07:42:15 Received message from Master: op=PointingHead serial=269844 07:42:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:42:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:42:16 Point started: ret=0 07:42:16 point_skyscan result=0 07:42:16 Check angles 07:42:16 SkyScan query 07:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:42:17 Message to Master queued w/err=0: serial=269844 error=0 07:42:22 Received message from Master: op=Filter serial=269845 07:42:22 Color wheel filter change from 0 to 0 07:42:22 FLIGetFilterPos err=0 currentPosition=0 07:42:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:22 Filter is already there-color wheel unchanged 07:42:22 Received message from Master: op=Shutter serial=269846 07:42:22 Shutter LASER close 07:42:22 Received message from Camera: op=State serial=269848 07:42:22 GetSingleValue result=40 Value=cccccccc 07:42:22 SkyScan query 07:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:23 Parameters OK 07:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:23 Set A/D data flow result=40 07:42:23 Set A/D channel type result=40 07:42:23 Set A/D encoding result=40 07:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:23 Set channel filter=0.000000e+000 result=40 07:42:23 Config A/D Result=40 07:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:23 Get A/D filter: -9.255963e+061 result=40 07:42:23 Get A/D value=-858993460 result=40 07:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:23 Parameters OK 07:42:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:23 Set A/D data flow result=40 07:42:23 Set A/D channel type result=40 07:42:23 Set A/D encoding result=40 07:42:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:23 Set channel filter=0.000000e+000 result=40 07:42:23 Config A/D Result=40 07:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:23 Get A/D filter: -9.255963e+061 result=40 07:42:23 Get A/D value=-858993460 result=40 07:42:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:23 Aux= 07:42:23 Message to Camera, serial 269848 queued 07:43:00 Received message from Master: op=PointingHead serial=269861 07:43:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:43:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:43:00 Point started: ret=0 07:43:00 point_skyscan result=0 07:43:01 Check angles 07:43:01 SkyScan query 07:43:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.79<-13586 Statuses=0008 0009 07:43:01 Msec=0 True Az=112.995 Ze=-23.79 Az status=0008 Ze status=0009 07:43:01 Check angles 07:43:01 SkyScan query 07:43:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.15<-15010 Statuses=0008 0009 07:43:02 Msec=750 True Az=112.995 Ze=-45.15 Az status=0008 Ze status=0009 07:43:02 Check angles 07:43:02 SkyScan query 07:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 07:43:03 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 07:43:03 Check angles 07:43:03 SkyScan query 07:43:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 07:43:03 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 07:43:04 Check angles 07:43:04 SkyScan query 07:43:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.495<-19233 Statuses=0008 0009 07:43:04 Msec=3000 True Az=112.995 Ze=-108.495 Az status=0008 Ze status=0009 07:43:04 Check angles 07:43:04 SkyScan query 07:43:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 07:43:05 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 07:43:05 Check angles 07:43:05 SkyScan query 07:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 07:43:06 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 07:43:06 Check angles 07:43:06 SkyScan query 07:43:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 07:43:06 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 07:43:07 Check angles 07:43:07 SkyScan query 07:43:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:43:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:43:07 Message to Master queued w/err=0: serial=269861 error=0 07:43:12 Received message from Master: op=Filter serial=269862 07:43:12 Color wheel filter change from 0 to 0 07:43:12 FLIGetFilterPos err=0 currentPosition=0 07:43:12 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:12 Filter is already there-color wheel unchanged 07:43:12 Received message from Master: op=Shutter serial=269863 07:43:12 Shutter LASER open 07:43:13 Received message from Camera: op=State serial=269865 07:43:13 GetSingleValue result=40 Value=cccccccc 07:43:13 SkyScan query 07:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:43:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:13 Parameters OK 07:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:13 Set A/D data flow result=40 07:43:13 Set A/D channel type result=40 07:43:13 Set A/D encoding result=40 07:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:13 Set channel filter=0.000000e+000 result=40 07:43:13 Config A/D Result=40 07:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:13 Get A/D filter: -9.255963e+061 result=40 07:43:13 Get A/D value=-858993460 result=40 07:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:13 Parameters OK 07:43:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:13 Set A/D data flow result=40 07:43:13 Set A/D channel type result=40 07:43:13 Set A/D encoding result=40 07:43:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:13 Set channel filter=0.000000e+000 result=40 07:43:13 Config A/D Result=40 07:43:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:13 Get A/D filter: -9.255963e+061 result=40 07:43:13 Get A/D value=-858993460 result=40 07:43:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:13 Aux= 07:43:13 Message to Camera, serial 269865 queued 07:43:22 Received message from Master: op=Shutter serial=269875 07:43:22 Shutter LASER close 07:43:22 Received message from Master: op=PointingHead serial=269879 07:43:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:43:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:43:23 Point started: ret=0 07:43:23 point_skyscan result=0 07:43:23 Check angles 07:43:23 SkyScan query 07:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 07:43:24 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 07:43:24 Check angles 07:43:24 SkyScan query 07:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.145<-20143 Statuses=0008 0009 07:43:25 Msec=750 True Az=112.995 Ze=-122.145 Az status=0008 Ze status=0009 07:43:25 Check angles 07:43:25 SkyScan query 07:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 07:43:25 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.265<-17351 Statuses=0008 0009 07:43:26 Msec=2250 True Az=112.995 Ze=-80.265 Az status=0008 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 07:43:27 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 07:43:27 Check angles 07:43:27 SkyScan query 07:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.295<-14553 Statuses=0008 0009 07:43:28 Msec=3750 True Az=112.995 Ze=-38.295 Az status=0008 Ze status=0009 07:43:28 Check angles 07:43:28 SkyScan query 07:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.37<-13158 Statuses=0008 0009 07:43:28 Msec=4500 True Az=112.995 Ze=-17.37 Az status=0008 Ze status=0009 07:43:29 Check angles 07:43:29 SkyScan query 07:43:29 SkyScan query done: ret=0 az=112.995<-7533 ze=3.615<-11759 Statuses=0008 0009 07:43:29 Msec=5250 True Az=112.995 Ze=3.615 Az status=0008 Ze status=0009 07:43:29 Check angles 07:43:29 SkyScan query 07:43:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:43:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:43:30 Message to Master queued w/err=0: serial=269879 error=0 07:43:35 Received message from Master: op=Filter serial=269880 07:43:35 Color wheel filter change from 0 to 0 07:43:35 FLIGetFilterPos err=0 currentPosition=0 07:43:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:35 Filter is already there-color wheel unchanged 07:43:35 Received message from Master: op=Shutter serial=269881 07:43:35 Shutter LASER close 07:43:35 Received message from Camera: op=State serial=269883 07:43:35 GetSingleValue result=40 Value=cccccccc 07:43:35 SkyScan query 07:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:36 Parameters OK 07:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:36 Set A/D data flow result=40 07:43:36 Set A/D channel type result=40 07:43:36 Set A/D encoding result=40 07:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:36 Set channel filter=0.000000e+000 result=40 07:43:36 Config A/D Result=40 07:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:36 Get A/D filter: -9.255963e+061 result=40 07:43:36 Get A/D value=-858993460 result=40 07:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:36 Parameters OK 07:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:36 Set A/D data flow result=40 07:43:36 Set A/D channel type result=40 07:43:36 Set A/D encoding result=40 07:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:36 Set channel filter=0.000000e+000 result=40 07:43:36 Config A/D Result=40 07:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:36 Get A/D filter: -9.255963e+061 result=40 07:43:36 Get A/D value=-858993460 result=40 07:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:36 Aux= 07:43:36 Message to Camera, serial 269883 queued [UTC 2019-3-14 07:43:48] 07:44:13 Received message from Master: op=PointingHead serial=269896 07:44:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:44:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:44:13 Point started: ret=0 07:44:13 point_skyscan result=0 07:44:14 Check angles 07:44:14 SkyScan query 07:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:44:14 Message to Master queued w/err=0: serial=269896 error=0 07:44:19 Received message from Master: op=Filter serial=269897 07:44:19 Color wheel filter change from 0 to 0 07:44:19 FLIGetFilterPos err=0 currentPosition=0 07:44:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:19 Filter is already there-color wheel unchanged 07:44:19 Received message from Master: op=Shutter serial=269898 07:44:19 Shutter LASER close 07:44:20 Received message from Camera: op=State serial=269900 07:44:20 GetSingleValue result=40 Value=cccccccc 07:44:20 SkyScan query 07:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:44:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:20 Parameters OK 07:44:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:20 Set A/D data flow result=40 07:44:20 Set A/D channel type result=40 07:44:20 Set A/D encoding result=40 07:44:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:20 Set channel filter=0.000000e+000 result=40 07:44:20 Config A/D Result=40 07:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:20 Get A/D filter: -9.255963e+061 result=40 07:44:20 Get A/D value=-858993460 result=40 07:44:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:20 Parameters OK 07:44:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:20 Set A/D data flow result=40 07:44:20 Set A/D channel type result=40 07:44:20 Set A/D encoding result=40 07:44:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:20 Set channel filter=0.000000e+000 result=40 07:44:20 Config A/D Result=40 07:44:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:20 Get A/D filter: -9.255963e+061 result=40 07:44:20 Get A/D value=-858993460 result=40 07:44:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:20 Aux= 07:44:20 Message to Camera, serial 269900 queued 07:44:57 Received message from Master: op=PointingHead serial=269913 07:44:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:44:57 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:44:57 Point started: ret=0 07:44:57 point_skyscan result=0 07:44:58 Check angles 07:44:58 SkyScan query 07:44:59 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 07:44:59 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 07:44:59 Check angles 07:44:59 SkyScan query 07:44:59 SkyScan query done: ret=0 az=153.315<-10221 ze=-6.495<-12433 Statuses=0009 0008 07:44:59 Msec=750 True Az=153.315 Ze=-6.495 Az status=0009 Ze status=0008 07:45:00 Check angles 07:45:00 SkyScan query 07:45:00 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 07:45:00 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 07:45:00 Check angles 07:45:00 SkyScan query 07:45:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:45:01 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:45:01 Message to Master queued w/err=0: serial=269913 error=0 07:45:06 Received message from Master: op=Filter serial=269914 07:45:06 Color wheel filter change from 0 to 0 07:45:06 FLIGetFilterPos err=0 currentPosition=0 07:45:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:06 Filter is already there-color wheel unchanged 07:45:06 Received message from Master: op=Shutter serial=269915 07:45:06 Shutter LASER close 07:45:06 Received message from Camera: op=State serial=269917 07:45:06 GetSingleValue result=40 Value=cccccccc 07:45:06 SkyScan query 07:45:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:45:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:07 Parameters OK 07:45:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:07 Set A/D data flow result=40 07:45:07 Set A/D channel type result=40 07:45:07 Set A/D encoding result=40 07:45:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:07 Set channel filter=0.000000e+000 result=40 07:45:07 Config A/D Result=40 07:45:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:07 Get A/D filter: -9.255963e+061 result=40 07:45:07 Get A/D value=-858993460 result=40 07:45:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:07 Parameters OK 07:45:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:07 Set A/D data flow result=40 07:45:07 Set A/D channel type result=40 07:45:07 Set A/D encoding result=40 07:45:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:07 Set channel filter=0.000000e+000 result=40 07:45:07 Config A/D Result=40 07:45:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:07 Get A/D filter: -9.255963e+061 result=40 07:45:07 Get A/D value=-858993460 result=40 07:45:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:07 Aux= 07:45:07 Message to Camera, serial 269917 queued 07:45:43 Received message from Master: op=PointingHead serial=269930 07:45:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:45:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:45:44 Point started: ret=0 07:45:44 point_skyscan result=0 07:45:45 Check angles 07:45:45 SkyScan query 07:45:45 SkyScan query done: ret=0 az=153.27<-10218 ze=6.51<-11566 Statuses=0009 0008 07:45:45 Msec=0 True Az=153.27 Ze=6.51 Az status=0009 Ze status=0008 07:45:45 Check angles 07:45:45 SkyScan query 07:45:46 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 07:45:46 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 07:45:46 Check angles 07:45:46 SkyScan query 07:45:47 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 07:45:47 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 07:45:47 Check angles 07:45:47 SkyScan query 07:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:45:47 Message to Master queued w/err=0: serial=269930 error=0 07:45:52 Received message from Master: op=Filter serial=269931 07:45:52 Color wheel filter change from 0 to 0 07:45:52 FLIGetFilterPos err=0 currentPosition=0 07:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:52 Filter is already there-color wheel unchanged 07:45:53 Received message from Master: op=Shutter serial=269932 07:45:53 Shutter LASER close 07:45:53 Received message from Camera: op=State serial=269934 07:45:53 GetSingleValue result=40 Value=cccccccc 07:45:53 SkyScan query 07:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:53 Parameters OK 07:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:53 Set A/D data flow result=40 07:45:53 Set A/D channel type result=40 07:45:53 Set A/D encoding result=40 07:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:53 Set channel filter=0.000000e+000 result=40 07:45:53 Config A/D Result=40 07:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:53 Get A/D filter: -9.255963e+061 result=40 07:45:53 Get A/D value=-858993460 result=40 07:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:53 Parameters OK 07:45:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:53 Set A/D data flow result=40 07:45:53 Set A/D channel type result=40 07:45:53 Set A/D encoding result=40 07:45:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:53 Set channel filter=0.000000e+000 result=40 07:45:53 Config A/D Result=40 07:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:53 Get A/D filter: -9.255963e+061 result=40 07:45:53 Get A/D value=-858993460 result=40 07:45:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:53 Aux= 07:45:53 Message to Camera, serial 269934 queued 07:46:30 Received message from Master: op=PointingHead serial=269947 07:46:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:46:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:46:30 Point started: ret=0 07:46:30 point_skyscan result=0 07:46:31 Check angles 07:46:31 SkyScan query 07:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 07:46:32 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 07:46:32 Check angles 07:46:32 SkyScan query 07:46:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 07:46:32 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 07:46:33 Check angles 07:46:33 SkyScan query 07:46:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.73<-16382 Statuses=0008 0009 07:46:33 Msec=1500 True Az=112.995 Ze=-65.73 Az status=0008 Ze status=0009 07:46:33 Check angles 07:46:33 SkyScan query 07:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.18<-17812 Statuses=0008 0009 07:46:34 Msec=2250 True Az=112.995 Ze=-87.18 Az status=0008 Ze status=0009 07:46:34 Check angles 07:46:34 SkyScan query 07:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.12<-19208 Statuses=0008 0009 07:46:35 Msec=3000 True Az=112.995 Ze=-108.12 Az status=0008 Ze status=0009 07:46:35 Check angles 07:46:35 SkyScan query 07:46:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 07:46:35 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 07:46:36 Check angles 07:46:36 SkyScan query 07:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 07:46:36 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 07:46:36 Check angles 07:46:36 SkyScan query 07:46:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 07:46:37 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 07:46:37 Check angles 07:46:37 SkyScan query 07:46:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:46:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:46:38 Message to Master queued w/err=0: serial=269947 error=0 07:46:43 Received message from Master: op=Filter serial=269948 07:46:43 Color wheel filter change from 0 to 0 07:46:43 FLIGetFilterPos err=0 currentPosition=0 07:46:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:43 Filter is already there-color wheel unchanged 07:46:43 Received message from Master: op=Shutter serial=269949 07:46:43 Shutter LASER open 07:46:43 Received message from Camera: op=State serial=269951 07:46:43 GetSingleValue result=40 Value=cccccccc 07:46:43 SkyScan query 07:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:46:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:44 Parameters OK 07:46:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:44 Set A/D data flow result=40 07:46:44 Set A/D channel type result=40 07:46:44 Set A/D encoding result=40 07:46:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:44 Set channel filter=0.000000e+000 result=40 07:46:44 Config A/D Result=40 07:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:44 Get A/D filter: -9.255963e+061 result=40 07:46:44 Get A/D value=-858993460 result=40 07:46:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:44 Parameters OK 07:46:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:44 Set A/D data flow result=40 07:46:44 Set A/D channel type result=40 07:46:44 Set A/D encoding result=40 07:46:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:44 Set channel filter=0.000000e+000 result=40 07:46:44 Config A/D Result=40 07:46:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:44 Get A/D filter: -9.255963e+061 result=40 07:46:44 Get A/D value=-858993460 result=40 07:46:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:44 Aux= 07:46:44 Message to Camera, serial 269951 queued 07:46:51 Received message from Master: op=Shutter serial=269960 07:46:51 Shutter LASER close 07:46:52 Received message from Master: op=PointingHead serial=269964 07:46:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:46:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:46:52 Point started: ret=0 07:46:52 point_skyscan result=0 07:46:53 Check angles 07:46:53 SkyScan query 07:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 07:46:53 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 07:46:53 Check angles 07:46:53 SkyScan query 07:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.19<-20146 Statuses=0008 0009 07:46:54 Msec=750 True Az=112.995 Ze=-122.19 Az status=0008 Ze status=0009 07:46:54 Check angles 07:46:54 SkyScan query 07:46:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 07:46:55 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 07:46:55 Check angles 07:46:55 SkyScan query 07:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 07:46:56 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 07:46:56 Check angles 07:46:56 SkyScan query 07:46:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 07:46:56 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 07:46:56 Check angles 07:46:56 SkyScan query 07:46:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 07:46:57 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 07:46:57 Check angles 07:46:57 SkyScan query 07:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.935<-13129 Statuses=0008 0009 07:46:58 Msec=4500 True Az=112.995 Ze=-16.935 Az status=0008 Ze status=0009 07:46:58 Check angles 07:46:58 SkyScan query 07:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.35<-11710 Statuses=0008 0009 07:46:59 Msec=5250 True Az=112.995 Ze=4.35 Az status=0008 Ze status=0009 07:46:59 Check angles 07:46:59 SkyScan query 07:46:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:46:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:46:59 Message to Master queued w/err=0: serial=269964 error=0 07:47:04 Received message from Master: op=Filter serial=269965 07:47:04 Color wheel filter change from 0 to 0 07:47:04 FLIGetFilterPos err=0 currentPosition=0 07:47:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:04 Filter is already there-color wheel unchanged 07:47:04 Received message from Master: op=Shutter serial=269966 07:47:04 Shutter LASER close 07:47:05 Received message from Camera: op=State serial=269968 07:47:05 GetSingleValue result=40 Value=cccccccc 07:47:05 SkyScan query 07:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:05 Parameters OK 07:47:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:05 Set A/D data flow result=40 07:47:05 Set A/D channel type result=40 07:47:05 Set A/D encoding result=40 07:47:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:05 Set channel filter=0.000000e+000 result=40 07:47:05 Config A/D Result=40 07:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:05 Get A/D filter: -9.255963e+061 result=40 07:47:05 Get A/D value=-858993460 result=40 07:47:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:05 Parameters OK 07:47:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:05 Set A/D data flow result=40 07:47:05 Set A/D channel type result=40 07:47:05 Set A/D encoding result=40 07:47:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:05 Set channel filter=0.000000e+000 result=40 07:47:05 Config A/D Result=40 07:47:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:05 Get A/D filter: -9.255963e+061 result=40 07:47:05 Get A/D value=-858993460 result=40 07:47:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:05 Aux= 07:47:05 Message to Camera, serial 269968 queued 07:47:42 Received message from Master: op=PointingHead serial=269981 07:47:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:47:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:47:42 Point started: ret=0 07:47:42 point_skyscan result=0 07:47:43 Check angles 07:47:43 SkyScan query 07:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:47:44 Message to Master queued w/err=0: serial=269981 error=0 07:47:49 Received message from Master: op=Filter serial=269982 07:47:49 Color wheel filter change from 0 to 0 07:47:49 FLIGetFilterPos err=0 currentPosition=0 07:47:49 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:49 Filter is already there-color wheel unchanged 07:47:49 Received message from Master: op=Shutter serial=269983 07:47:49 Shutter LASER close 07:47:49 Received message from Camera: op=State serial=269985 07:47:49 GetSingleValue result=40 Value=cccccccc 07:47:49 SkyScan query 07:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:47:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:50 Parameters OK 07:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:50 Set A/D data flow result=40 07:47:50 Set A/D channel type result=40 07:47:50 Set A/D encoding result=40 07:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:50 Set channel filter=0.000000e+000 result=40 07:47:50 Config A/D Result=40 07:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:50 Get A/D filter: -9.255963e+061 result=40 07:47:50 Get A/D value=-858993460 result=40 07:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:50 Parameters OK 07:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:50 Set A/D data flow result=40 07:47:50 Set A/D channel type result=40 07:47:50 Set A/D encoding result=40 07:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:50 Set channel filter=0.000000e+000 result=40 07:47:50 Config A/D Result=40 07:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:50 Get A/D filter: -9.255963e+061 result=40 07:47:50 Get A/D value=-858993460 result=40 07:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:50 Aux= 07:47:50 Message to Camera, serial 269985 queued 07:48:25 Received message from Master: op=PointingHead serial=269997 07:48:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:48:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:48:26 Point started: ret=0 07:48:26 point_skyscan result=0 07:48:27 Check angles 07:48:27 SkyScan query 07:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:48:27 Message to Master queued w/err=0: serial=269997 error=0 07:48:32 Received message from Master: op=Filter serial=269998 07:48:32 Color wheel filter change from 0 to 0 07:48:32 FLIGetFilterPos err=0 currentPosition=0 07:48:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:32 Filter is already there-color wheel unchanged 07:48:32 Received message from Master: op=Shutter serial=269999 07:48:32 Shutter LASER close 07:48:32 Received message from Camera: op=State serial=270001 07:48:32 GetSingleValue result=40 Value=cccccccc 07:48:32 SkyScan query 07:48:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:48:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:33 Parameters OK 07:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:33 Set A/D data flow result=40 07:48:33 Set A/D channel type result=40 07:48:33 Set A/D encoding result=40 07:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:33 Set channel filter=0.000000e+000 result=40 07:48:33 Config A/D Result=40 07:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:33 Get A/D filter: -9.255963e+061 result=40 07:48:33 Get A/D value=-858993460 result=40 07:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:33 Parameters OK 07:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:33 Set A/D data flow result=40 07:48:33 Set A/D channel type result=40 07:48:33 Set A/D encoding result=40 07:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:33 Set channel filter=0.000000e+000 result=40 07:48:33 Config A/D Result=40 07:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:33 Get A/D filter: -9.255963e+061 result=40 07:48:33 Get A/D value=-858993460 result=40 07:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:33 Aux= 07:48:33 Message to Camera, serial 270001 queued 07:49:10 Received message from Master: op=PointingHead serial=270014 07:49:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:49:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:49:10 Point started: ret=0 07:49:10 point_skyscan result=0 07:49:11 Check angles 07:49:11 SkyScan query 07:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:49:11 Message to Master queued w/err=0: serial=270014 error=0 07:49:16 Received message from Master: op=Filter serial=270015 07:49:16 Color wheel filter change from 0 to 0 07:49:16 FLIGetFilterPos err=0 currentPosition=0 07:49:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:16 Filter is already there-color wheel unchanged 07:49:17 Received message from Master: op=Shutter serial=270016 07:49:17 Shutter LASER close 07:49:17 Received message from Camera: op=State serial=270018 07:49:17 GetSingleValue result=40 Value=cccccccc 07:49:17 SkyScan query 07:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:49:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:17 Parameters OK 07:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:17 Set A/D data flow result=40 07:49:17 Set A/D channel type result=40 07:49:17 Set A/D encoding result=40 07:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:17 Set channel filter=0.000000e+000 result=40 07:49:17 Config A/D Result=40 07:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:17 Get A/D filter: -9.255963e+061 result=40 07:49:17 Get A/D value=-858993460 result=40 07:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:17 Parameters OK 07:49:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:17 Set A/D data flow result=40 07:49:17 Set A/D channel type result=40 07:49:17 Set A/D encoding result=40 07:49:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:17 Set channel filter=0.000000e+000 result=40 07:49:17 Config A/D Result=40 07:49:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:17 Get A/D filter: -9.255963e+061 result=40 07:49:17 Get A/D value=-858993460 result=40 07:49:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:17 Aux= 07:49:17 Message to Camera, serial 270018 queued 07:49:54 Received message from Master: op=PointingHead serial=270031 07:49:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:49:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:49:54 Point started: ret=0 07:49:54 point_skyscan result=0 07:49:55 Check angles 07:49:55 SkyScan query 07:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 07:49:56 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 07:49:56 Check angles 07:49:56 SkyScan query 07:49:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.685<-14979 Statuses=0008 0009 07:49:56 Msec=750 True Az=112.995 Ze=-44.685 Az status=0008 Ze status=0009 07:49:57 Check angles 07:49:57 SkyScan query 07:49:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 07:49:57 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 07:49:57 Check angles 07:49:57 SkyScan query 07:49:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 07:49:58 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 07:49:58 Check angles 07:49:58 SkyScan query 07:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 07:49:59 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 07:49:59 Check angles 07:49:59 SkyScan query 07:49:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.835<-20589 Statuses=0008 0009 07:49:59 Msec=3750 True Az=112.995 Ze=-128.835 Az status=0008 Ze status=0009 07:50:00 Check angles 07:50:00 SkyScan query 07:50:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.82<-21988 Statuses=0008 0009 07:50:00 Msec=4500 True Az=112.995 Ze=-149.82 Az status=0008 Ze status=0009 07:50:00 Check angles 07:50:00 SkyScan query 07:50:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.045<-23403 Statuses=0008 0009 07:50:01 Msec=5250 True Az=112.995 Ze=-171.045 Az status=0008 Ze status=0009 07:50:01 Check angles 07:50:01 SkyScan query 07:50:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:50:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:50:02 Message to Master queued w/err=0: serial=270031 error=0 07:50:07 Received message from Master: op=Filter serial=270032 07:50:07 Color wheel filter change from 0 to 0 07:50:07 FLIGetFilterPos err=0 currentPosition=0 07:50:07 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:07 Filter is already there-color wheel unchanged 07:50:07 Received message from Master: op=Shutter serial=270033 07:50:07 Shutter LASER open 07:50:07 Received message from Camera: op=State serial=270035 07:50:07 GetSingleValue result=40 Value=cccccccc 07:50:07 SkyScan query 07:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:50:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:08 Parameters OK 07:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:08 Set A/D data flow result=40 07:50:08 Set A/D channel type result=40 07:50:08 Set A/D encoding result=40 07:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:08 Set channel filter=0.000000e+000 result=40 07:50:08 Config A/D Result=40 07:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:08 Get A/D filter: -9.255963e+061 result=40 07:50:08 Get A/D value=-858993460 result=40 07:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:08 Parameters OK 07:50:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:08 Set A/D data flow result=40 07:50:08 Set A/D channel type result=40 07:50:08 Set A/D encoding result=40 07:50:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:08 Set channel filter=0.000000e+000 result=40 07:50:08 Config A/D Result=40 07:50:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:08 Get A/D filter: -9.255963e+061 result=40 07:50:08 Get A/D value=-858993460 result=40 07:50:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:08 Aux= 07:50:08 Message to Camera, serial 270035 queued 07:50:16 Received message from Master: op=Shutter serial=270045 07:50:16 Shutter LASER close 07:50:17 Received message from Master: op=PointingHead serial=270049 07:50:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:50:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:50:17 Point started: ret=0 07:50:17 point_skyscan result=0 07:50:18 Check angles 07:50:18 SkyScan query 07:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 07:50:18 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 07:50:19 Check angles 07:50:19 SkyScan query 07:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.61<-20174 Statuses=0008 0009 07:50:19 Msec=750 True Az=112.995 Ze=-122.61 Az status=0008 Ze status=0009 07:50:19 Check angles 07:50:19 SkyScan query 07:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.235<-18749 Statuses=0008 0009 07:50:20 Msec=1500 True Az=112.995 Ze=-101.235 Az status=0008 Ze status=0009 07:50:20 Check angles 07:50:20 SkyScan query 07:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 07:50:21 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 07:50:21 Check angles 07:50:21 SkyScan query 07:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 07:50:21 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 07:50:22 Check angles 07:50:22 SkyScan query 07:50:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 07:50:22 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 07:50:22 Check angles 07:50:22 SkyScan query 07:50:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.905<-13127 Statuses=0008 0009 07:50:23 Msec=4500 True Az=112.995 Ze=-16.905 Az status=0008 Ze status=0009 07:50:23 Check angles 07:50:23 SkyScan query 07:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.035<-11731 Statuses=0008 0009 07:50:24 Msec=5250 True Az=112.995 Ze=4.035 Az status=0008 Ze status=0009 07:50:24 Check angles 07:50:24 SkyScan query 07:50:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:50:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:50:24 Message to Master queued w/err=0: serial=270049 error=0 07:50:29 Received message from Master: op=Filter serial=270050 07:50:29 Color wheel filter change from 0 to 0 07:50:29 FLIGetFilterPos err=0 currentPosition=0 07:50:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:29 Filter is already there-color wheel unchanged 07:50:30 Received message from Master: op=Shutter serial=270051 07:50:30 Shutter LASER close 07:50:30 Received message from Camera: op=State serial=270053 07:50:30 GetSingleValue result=40 Value=cccccccc 07:50:30 SkyScan query 07:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:50:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:30 Parameters OK 07:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:30 Set A/D data flow result=40 07:50:30 Set A/D channel type result=40 07:50:30 Set A/D encoding result=40 07:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:30 Set channel filter=0.000000e+000 result=40 07:50:30 Config A/D Result=40 07:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:30 Get A/D filter: -9.255963e+061 result=40 07:50:30 Get A/D value=-858993460 result=40 07:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:30 Parameters OK 07:50:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:30 Set A/D data flow result=40 07:50:30 Set A/D channel type result=40 07:50:30 Set A/D encoding result=40 07:50:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:30 Set channel filter=0.000000e+000 result=40 07:50:30 Config A/D Result=40 07:50:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:30 Get A/D filter: -9.255963e+061 result=40 07:50:30 Get A/D value=-858993460 result=40 07:50:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:30 Aux= 07:50:30 Message to Camera, serial 270053 queued 07:51:07 Received message from Master: op=PointingHead serial=270066 07:51:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:51:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:51:07 Point started: ret=0 07:51:07 point_skyscan result=0 07:51:08 Check angles 07:51:08 SkyScan query 07:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:51:09 Message to Master queued w/err=0: serial=270066 error=0 07:51:14 Received message from Master: op=Filter serial=270067 07:51:14 Color wheel filter change from 0 to 0 07:51:14 FLIGetFilterPos err=0 currentPosition=0 07:51:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:14 Filter is already there-color wheel unchanged 07:51:14 Received message from Master: op=Shutter serial=270068 07:51:14 Shutter LASER close 07:51:14 Received message from Camera: op=State serial=270070 07:51:14 GetSingleValue result=40 Value=cccccccc 07:51:14 SkyScan query 07:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:51:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:15 Parameters OK 07:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:15 Set A/D data flow result=40 07:51:15 Set A/D channel type result=40 07:51:15 Set A/D encoding result=40 07:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:15 Set channel filter=0.000000e+000 result=40 07:51:15 Config A/D Result=40 07:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:15 Get A/D filter: -9.255963e+061 result=40 07:51:15 Get A/D value=-858993460 result=40 07:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:15 Parameters OK 07:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:15 Set A/D data flow result=40 07:51:15 Set A/D channel type result=40 07:51:15 Set A/D encoding result=40 07:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:15 Set channel filter=0.000000e+000 result=40 07:51:15 Config A/D Result=40 07:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:15 Get A/D filter: -9.255963e+061 result=40 07:51:15 Get A/D value=-858993460 result=40 07:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:15 Aux= 07:51:15 Message to Camera, serial 270070 queued 07:51:52 Received message from Master: op=PointingHead serial=270083 07:51:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:51:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:51:52 Point started: ret=0 07:51:52 point_skyscan result=0 07:51:53 Check angles 07:51:53 SkyScan query 07:51:53 SkyScan query done: ret=0 az=135.915<-9061 ze=-6.51<-12434 Statuses=0009 0008 07:51:53 Msec=0 True Az=135.915 Ze=-6.51 Az status=0009 Ze status=0008 07:51:53 Check angles 07:51:53 SkyScan query 07:51:54 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 07:51:54 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 07:51:54 Check angles 07:51:54 SkyScan query 07:51:55 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 07:51:55 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 07:51:55 Check angles 07:51:55 SkyScan query 07:51:55 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:51:55 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:51:55 Message to Master queued w/err=0: serial=270083 error=0 07:52:00 Received message from Master: op=Filter serial=270084 07:52:00 Color wheel filter change from 0 to 0 07:52:00 FLIGetFilterPos err=0 currentPosition=0 07:52:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:00 Filter is already there-color wheel unchanged 07:52:01 Received message from Master: op=Shutter serial=270085 07:52:01 Shutter LASER close 07:52:01 Received message from Camera: op=State serial=270087 07:52:01 GetSingleValue result=40 Value=cccccccc 07:52:01 SkyScan query 07:52:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:52:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:01 Parameters OK 07:52:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:01 Set A/D data flow result=40 07:52:01 Set A/D channel type result=40 07:52:01 Set A/D encoding result=40 07:52:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:01 Set channel filter=0.000000e+000 result=40 07:52:01 Config A/D Result=40 07:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:01 Get A/D filter: -9.255963e+061 result=40 07:52:01 Get A/D value=-858993460 result=40 07:52:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:01 Parameters OK 07:52:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:01 Set A/D data flow result=40 07:52:01 Set A/D channel type result=40 07:52:01 Set A/D encoding result=40 07:52:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:01 Set channel filter=0.000000e+000 result=40 07:52:01 Config A/D Result=40 07:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:01 Get A/D filter: -9.255963e+061 result=40 07:52:01 Get A/D value=-858993460 result=40 07:52:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:01 Aux= 07:52:01 Message to Camera, serial 270087 queued 07:52:38 Received message from Master: op=PointingHead serial=270100 07:52:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:52:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:52:38 Point started: ret=0 07:52:38 point_skyscan result=0 07:52:39 Check angles 07:52:39 SkyScan query 07:52:40 SkyScan query done: ret=0 az=152.505<-10167 ze=6.51<-11566 Statuses=0009 0008 07:52:40 Msec=0 True Az=152.505 Ze=6.51 Az status=0009 Ze status=0008 07:52:40 Check angles 07:52:40 SkyScan query 07:52:41 SkyScan query done: ret=0 az=134.64<-8976 ze=6.495<-11567 Statuses=0009 0008 07:52:41 Msec=750 True Az=134.64 Ze=6.495 Az status=0009 Ze status=0008 07:52:41 Check angles 07:52:41 SkyScan query 07:52:41 SkyScan query done: ret=0 az=117.21<-7814 ze=6.495<-11567 Statuses=0009 0008 07:52:41 Msec=1500 True Az=117.21 Ze=6.495 Az status=0009 Ze status=0008 07:52:41 Check angles 07:52:41 SkyScan query 07:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:52:42 Message to Master queued w/err=0: serial=270100 error=0 07:52:47 Received message from Master: op=Filter serial=270101 07:52:47 Color wheel filter change from 0 to 0 07:52:47 FLIGetFilterPos err=0 currentPosition=0 07:52:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:47 Filter is already there-color wheel unchanged 07:52:47 Received message from Master: op=Shutter serial=270102 07:52:47 Shutter LASER close 07:52:47 Received message from Camera: op=State serial=270104 07:52:47 GetSingleValue result=40 Value=cccccccc 07:52:47 SkyScan query 07:52:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:52:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:48 Parameters OK 07:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:48 Set A/D data flow result=40 07:52:48 Set A/D channel type result=40 07:52:48 Set A/D encoding result=40 07:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:48 Set channel filter=0.000000e+000 result=40 07:52:48 Config A/D Result=40 07:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:48 Get A/D filter: -9.255963e+061 result=40 07:52:48 Get A/D value=-858993460 result=40 07:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:48 Parameters OK 07:52:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:48 Set A/D data flow result=40 07:52:48 Set A/D channel type result=40 07:52:48 Set A/D encoding result=40 07:52:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:48 Set channel filter=0.000000e+000 result=40 07:52:48 Config A/D Result=40 07:52:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:48 Get A/D filter: -9.255963e+061 result=40 07:52:48 Get A/D value=-858993460 result=40 07:52:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:48 Aux= 07:52:48 Message to Camera, serial 270104 queued 07:53:25 Received message from Master: op=PointingHead serial=270117 07:53:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:53:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:53:25 Point started: ret=0 07:53:25 point_skyscan result=0 07:53:26 Check angles 07:53:26 SkyScan query 07:53:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 07:53:26 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 07:53:27 Check angles 07:53:27 SkyScan query 07:53:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 07:53:27 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 07:53:27 Check angles 07:53:27 SkyScan query 07:53:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 07:53:28 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 07:53:28 Check angles 07:53:28 SkyScan query 07:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 07:53:29 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 07:53:29 Check angles 07:53:29 SkyScan query 07:53:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 07:53:29 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 07:53:30 Check angles 07:53:30 SkyScan query 07:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.815<-20521 Statuses=0008 0009 07:53:30 Msec=3750 True Az=112.995 Ze=-127.815 Az status=0008 Ze status=0009 07:53:30 Check angles 07:53:30 SkyScan query 07:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 07:53:31 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 07:53:31 Check angles 07:53:31 SkyScan query 07:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.71<-23314 Statuses=0008 0009 07:53:32 Msec=5250 True Az=112.995 Ze=-169.71 Az status=0008 Ze status=0009 07:53:32 Check angles 07:53:32 SkyScan query 07:53:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:53:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:53:32 Message to Master queued w/err=0: serial=270117 error=0 07:53:37 Received message from Master: op=Filter serial=270118 07:53:37 Color wheel filter change from 0 to 0 07:53:37 FLIGetFilterPos err=0 currentPosition=0 07:53:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:37 Filter is already there-color wheel unchanged 07:53:38 Received message from Master: op=Shutter serial=270119 07:53:38 Shutter LASER open 07:53:38 Received message from Camera: op=State serial=270121 07:53:38 GetSingleValue result=40 Value=cccccccc 07:53:38 SkyScan query 07:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:53:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:38 Parameters OK 07:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:38 Set A/D data flow result=40 07:53:38 Set A/D channel type result=40 07:53:38 Set A/D encoding result=40 07:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:38 Set channel filter=0.000000e+000 result=40 07:53:38 Config A/D Result=40 07:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:38 Get A/D filter: -9.255963e+061 result=40 07:53:38 Get A/D value=-858993460 result=40 07:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:38 Parameters OK 07:53:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:38 Set A/D data flow result=40 07:53:38 Set A/D channel type result=40 07:53:38 Set A/D encoding result=40 07:53:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:38 Set channel filter=0.000000e+000 result=40 07:53:38 Config A/D Result=40 07:53:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:38 Get A/D filter: -9.255963e+061 result=40 07:53:38 Get A/D value=-858993460 result=40 07:53:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:38 Aux= 07:53:38 Message to Camera, serial 270121 queued 07:53:47 Received message from Master: op=Shutter serial=270131 07:53:47 Shutter LASER close 07:53:47 Received message from Master: op=PointingHead serial=270135 07:53:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:53:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:53:47 Point started: ret=0 07:53:47 point_skyscan result=0 07:53:48 Check angles 07:53:48 SkyScan query 07:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 07:53:49 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 07:53:49 Check angles 07:53:49 SkyScan query 07:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 07:53:50 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 07:53:50 Check angles 07:53:50 SkyScan query 07:53:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 07:53:50 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 07:53:51 Check angles 07:53:51 SkyScan query 07:53:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 07:53:51 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 07:53:51 Check angles 07:53:51 SkyScan query 07:53:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.77<-15918 Statuses=0008 0009 07:53:52 Msec=3000 True Az=112.995 Ze=-58.77 Az status=0008 Ze status=0009 07:53:52 Check angles 07:53:52 SkyScan query 07:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 07:53:53 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 07:53:53 Check angles 07:53:53 SkyScan query 07:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 07:53:53 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 07:53:54 Check angles 07:53:54 SkyScan query 07:53:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 07:53:54 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 07:53:54 Check angles 07:53:54 SkyScan query 07:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:53:55 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:53:55 Message to Master queued w/err=0: serial=270135 error=0 07:54:00 Received message from Master: op=Filter serial=270136 07:54:00 Color wheel filter change from 0 to 0 07:54:00 FLIGetFilterPos err=0 currentPosition=0 07:54:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:00 Filter is already there-color wheel unchanged 07:54:00 Received message from Master: op=Shutter serial=270137 07:54:00 Shutter LASER close 07:54:00 Received message from Camera: op=State serial=270139 07:54:00 GetSingleValue result=40 Value=cccccccc 07:54:00 SkyScan query 07:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:01 Parameters OK 07:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:01 Set A/D data flow result=40 07:54:01 Set A/D channel type result=40 07:54:01 Set A/D encoding result=40 07:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:01 Set channel filter=0.000000e+000 result=40 07:54:01 Config A/D Result=40 07:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:01 Get A/D filter: -9.255963e+061 result=40 07:54:01 Get A/D value=-858993460 result=40 07:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:01 Parameters OK 07:54:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:01 Set A/D data flow result=40 07:54:01 Set A/D channel type result=40 [UTC 2019-3-14 07:54:01] 07:54:01 Set A/D encoding result=40 07:54:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:01 Set channel filter=0.000000e+000 result=40 07:54:01 Config A/D Result=40 07:54:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:01 Get A/D filter: -9.255963e+061 result=40 07:54:01 Get A/D value=-858993460 result=40 07:54:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:01 Aux= 07:54:01 Message to Camera, serial 270139 queued 07:54:38 Received message from Master: op=PointingHead serial=270152 07:54:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:54:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:54:38 Point started: ret=0 07:54:38 point_skyscan result=0 07:54:39 Check angles 07:54:39 SkyScan query 07:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:54:39 Message to Master queued w/err=0: serial=270152 error=0 07:54:44 Received message from Master: op=Filter serial=270153 07:54:44 Color wheel filter change from 0 to 0 07:54:44 FLIGetFilterPos err=0 currentPosition=0 07:54:44 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:44 Filter is already there-color wheel unchanged 07:54:44 Received message from Master: op=Shutter serial=270154 07:54:44 Shutter LASER close 07:54:44 Received message from Camera: op=State serial=270156 07:54:44 GetSingleValue result=40 Value=cccccccc 07:54:44 SkyScan query 07:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:54:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:45 Parameters OK 07:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:45 Set A/D data flow result=40 07:54:45 Set A/D channel type result=40 07:54:45 Set A/D encoding result=40 07:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:45 Set channel filter=0.000000e+000 result=40 07:54:45 Config A/D Result=40 07:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:45 Get A/D filter: -9.255963e+061 result=40 07:54:45 Get A/D value=-858993460 result=40 07:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:45 Parameters OK 07:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:45 Set A/D data flow result=40 07:54:45 Set A/D channel type result=40 07:54:45 Set A/D encoding result=40 07:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:45 Set channel filter=0.000000e+000 result=40 07:54:45 Config A/D Result=40 07:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:45 Get A/D filter: -9.255963e+061 result=40 07:54:45 Get A/D value=-858993460 result=40 07:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:45 Aux= 07:54:45 Message to Camera, serial 270156 queued 07:55:22 Received message from Master: op=PointingHead serial=270169 07:55:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:55:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:55:22 Point started: ret=0 07:55:22 point_skyscan result=0 07:55:23 Check angles 07:55:23 SkyScan query 07:55:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:55:24 Message to Master queued w/err=0: serial=270169 error=0 07:55:29 Received message from Master: op=Filter serial=270170 07:55:29 Color wheel filter change from 0 to 0 07:55:29 FLIGetFilterPos err=0 currentPosition=0 07:55:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:29 Filter is already there-color wheel unchanged 07:55:29 Received message from Master: op=Shutter serial=270171 07:55:29 Shutter LASER close 07:55:29 Received message from Camera: op=State serial=270173 07:55:29 GetSingleValue result=40 Value=cccccccc 07:55:29 SkyScan query 07:55:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:55:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:29 Parameters OK 07:55:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:29 Set A/D data flow result=40 07:55:29 Set A/D channel type result=40 07:55:29 Set A/D encoding result=40 07:55:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:29 Set channel filter=0.000000e+000 result=40 07:55:29 Config A/D Result=40 07:55:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:29 Get A/D filter: -9.255963e+061 result=40 07:55:29 Get A/D value=-858993460 result=40 07:55:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:29 Parameters OK 07:55:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:29 Set A/D data flow result=40 07:55:29 Set A/D channel type result=40 07:55:29 Set A/D encoding result=40 07:55:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:29 Set channel filter=0.000000e+000 result=40 07:55:29 Config A/D Result=40 07:55:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:29 Get A/D filter: -9.255963e+061 result=40 07:55:29 Get A/D value=-858993460 result=40 07:55:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:29 Aux= 07:55:29 Message to Camera, serial 270173 queued 07:56:06 Received message from Master: op=PointingHead serial=270186 07:56:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:56:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:56:06 Point started: ret=0 07:56:06 point_skyscan result=0 07:56:07 Check angles 07:56:07 SkyScan query 07:56:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:56:08 Message to Master queued w/err=0: serial=270186 error=0 07:56:13 Received message from Master: op=Filter serial=270187 07:56:13 Color wheel filter change from 0 to 0 07:56:13 FLIGetFilterPos err=0 currentPosition=0 07:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:13 Filter is already there-color wheel unchanged 07:56:13 Received message from Master: op=Shutter serial=270188 07:56:13 Shutter LASER close 07:56:13 Received message from Camera: op=State serial=270190 07:56:13 GetSingleValue result=40 Value=cccccccc 07:56:13 SkyScan query 07:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:56:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:14 Parameters OK 07:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:14 Set A/D data flow result=40 07:56:14 Set A/D channel type result=40 07:56:14 Set A/D encoding result=40 07:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:14 Set channel filter=0.000000e+000 result=40 07:56:14 Config A/D Result=40 07:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:14 Get A/D filter: -9.255963e+061 result=40 07:56:14 Get A/D value=-858993460 result=40 07:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:14 Parameters OK 07:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:14 Set A/D data flow result=40 07:56:14 Set A/D channel type result=40 07:56:14 Set A/D encoding result=40 07:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:14 Set channel filter=0.000000e+000 result=40 07:56:14 Config A/D Result=40 07:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:14 Get A/D filter: -9.255963e+061 result=40 07:56:14 Get A/D value=-858993460 result=40 07:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:14 Aux= 07:56:14 Message to Camera, serial 270190 queued 07:56:51 Received message from Master: op=PointingHead serial=270203 07:56:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:56:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:56:51 Point started: ret=0 07:56:51 point_skyscan result=0 07:56:52 Check angles 07:56:52 SkyScan query 07:56:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 07:56:52 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 07:56:52 Check angles 07:56:52 SkyScan query 07:56:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 07:56:53 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 07:56:53 Check angles 07:56:53 SkyScan query 07:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 07:56:54 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 07:56:54 Check angles 07:56:54 SkyScan query 07:56:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 07:56:54 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 07:56:55 Check angles 07:56:55 SkyScan query 07:56:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 07:56:55 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 07:56:55 Check angles 07:56:55 SkyScan query 07:56:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 07:56:56 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 07:56:56 Check angles 07:56:56 SkyScan query 07:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 07:56:57 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 07:56:57 Check angles 07:56:57 SkyScan query 07:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 07:56:57 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 07:56:58 Check angles 07:56:58 SkyScan query 07:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:56:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:56:58 Message to Master queued w/err=0: serial=270203 error=0 07:57:03 Received message from Master: op=Filter serial=270204 07:57:03 Color wheel filter change from 0 to 0 07:57:03 FLIGetFilterPos err=0 currentPosition=0 07:57:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:03 Filter is already there-color wheel unchanged 07:57:03 Received message from Master: op=Shutter serial=270205 07:57:03 Shutter LASER open 07:57:04 Received message from Camera: op=State serial=270207 07:57:04 GetSingleValue result=40 Value=cccccccc 07:57:04 SkyScan query 07:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:04 Parameters OK 07:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:04 Set A/D data flow result=40 07:57:04 Set A/D channel type result=40 07:57:04 Set A/D encoding result=40 07:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:04 Set channel filter=0.000000e+000 result=40 07:57:04 Config A/D Result=40 07:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:04 Get A/D filter: -9.255963e+061 result=40 07:57:04 Get A/D value=-858993460 result=40 07:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:04 Parameters OK 07:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:04 Set A/D data flow result=40 07:57:04 Set A/D channel type result=40 07:57:04 Set A/D encoding result=40 07:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:04 Set channel filter=0.000000e+000 result=40 07:57:04 Config A/D Result=40 07:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:04 Get A/D filter: -9.255963e+061 result=40 07:57:04 Get A/D value=-858993460 result=40 07:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:04 Aux= 07:57:04 Message to Camera, serial 270207 queued 07:57:13 Received message from Master: op=Shutter serial=270217 07:57:13 Shutter LASER close 07:57:13 Received message from Master: op=PointingHead serial=270221 07:57:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:57:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:57:14 Point started: ret=0 07:57:14 point_skyscan result=0 07:57:14 Check angles 07:57:14 SkyScan query 07:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 07:57:15 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 07:57:15 Check angles 07:57:15 SkyScan query 07:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 07:57:16 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 07:57:16 Check angles 07:57:16 SkyScan query 07:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 07:57:16 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 07:57:17 Check angles 07:57:17 SkyScan query 07:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.29<-17286 Statuses=0008 0009 07:57:17 Msec=2250 True Az=112.995 Ze=-79.29 Az status=0008 Ze status=0009 07:57:17 Check angles 07:57:17 SkyScan query 07:57:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.35<-15890 Statuses=0008 0009 07:57:18 Msec=3000 True Az=112.995 Ze=-58.35 Az status=0008 Ze status=0009 07:57:18 Check angles 07:57:18 SkyScan query 07:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.44<-14496 Statuses=0008 0009 07:57:19 Msec=3750 True Az=112.995 Ze=-37.44 Az status=0008 Ze status=0009 07:57:19 Check angles 07:57:19 SkyScan query 07:57:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 07:57:19 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 07:57:20 Check angles 07:57:20 SkyScan query 07:57:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 07:57:20 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 07:57:20 Check angles 07:57:20 SkyScan query 07:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 07:57:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 07:57:21 Message to Master queued w/err=0: serial=270221 error=0 07:57:26 Received message from Master: op=Filter serial=270222 07:57:26 Color wheel filter change from 0 to 0 07:57:26 FLIGetFilterPos err=0 currentPosition=0 07:57:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:26 Filter is already there-color wheel unchanged 07:57:26 Received message from Master: op=Shutter serial=270223 07:57:26 Shutter LASER close 07:57:26 Received message from Camera: op=State serial=270225 07:57:26 GetSingleValue result=40 Value=cccccccc 07:57:26 SkyScan query 07:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:57:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:27 Parameters OK 07:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:27 Set A/D data flow result=40 07:57:27 Set A/D channel type result=40 07:57:27 Set A/D encoding result=40 07:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:27 Set channel filter=0.000000e+000 result=40 07:57:27 Config A/D Result=40 07:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:27 Get A/D filter: -9.255963e+061 result=40 07:57:27 Get A/D value=-858993460 result=40 07:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:27 Parameters OK 07:57:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:27 Set A/D data flow result=40 07:57:27 Set A/D channel type result=40 07:57:27 Set A/D encoding result=40 07:57:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:27 Set channel filter=0.000000e+000 result=40 07:57:27 Config A/D Result=40 07:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:27 Get A/D filter: -9.255963e+061 result=40 07:57:27 Get A/D value=-858993460 result=40 07:57:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:27 Aux= 07:57:27 Message to Camera, serial 270225 queued 07:58:04 Received message from Master: op=PointingHead serial=270238 07:58:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:58:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:58:04 Point started: ret=0 07:58:04 point_skyscan result=0 07:58:05 Check angles 07:58:05 SkyScan query 07:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:58:05 Message to Master queued w/err=0: serial=270238 error=0 07:58:10 Received message from Master: op=Filter serial=270239 07:58:10 Color wheel filter change from 0 to 0 07:58:10 FLIGetFilterPos err=0 currentPosition=0 07:58:10 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:10 Filter is already there-color wheel unchanged 07:58:10 Received message from Master: op=Shutter serial=270240 07:58:10 Shutter LASER close 07:58:11 Received message from Camera: op=State serial=270242 07:58:11 GetSingleValue result=40 Value=cccccccc 07:58:11 SkyScan query 07:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:58:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:11 Parameters OK 07:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:11 Set A/D data flow result=40 07:58:11 Set A/D channel type result=40 07:58:11 Set A/D encoding result=40 07:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:11 Set channel filter=0.000000e+000 result=40 07:58:11 Config A/D Result=40 07:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:11 Get A/D filter: -9.255963e+061 result=40 07:58:11 Get A/D value=-858993460 result=40 07:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:11 Parameters OK 07:58:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:11 Set A/D data flow result=40 07:58:11 Set A/D channel type result=40 07:58:11 Set A/D encoding result=40 07:58:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:11 Set channel filter=0.000000e+000 result=40 07:58:11 Config A/D Result=40 07:58:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:11 Get A/D filter: -9.255963e+061 result=40 07:58:11 Get A/D value=-858993460 result=40 07:58:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:11 Aux= 07:58:11 Message to Camera, serial 270242 queued 07:58:48 Received message from Master: op=PointingHead serial=270255 07:58:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 07:58:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 07:58:48 Point started: ret=0 07:58:48 point_skyscan result=0 07:58:49 Check angles 07:58:49 SkyScan query 07:58:50 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 07:58:50 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 07:58:50 Check angles 07:58:50 SkyScan query 07:58:50 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 07:58:50 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 07:58:51 Check angles 07:58:51 SkyScan query 07:58:51 SkyScan query done: ret=0 az=171.39<-11426 ze=-6.495<-12433 Statuses=0009 0008 07:58:51 Msec=1500 True Az=171.39 Ze=-6.495 Az status=0009 Ze status=0008 07:58:51 Check angles 07:58:51 SkyScan query 07:58:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 07:58:52 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 07:58:52 Message to Master queued w/err=0: serial=270255 error=0 07:58:57 Received message from Master: op=Filter serial=270256 07:58:57 Color wheel filter change from 0 to 0 07:58:57 FLIGetFilterPos err=0 currentPosition=0 07:58:57 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:57 Filter is already there-color wheel unchanged 07:58:57 Received message from Master: op=Shutter serial=270257 07:58:57 Shutter LASER close 07:58:57 Received message from Camera: op=State serial=270259 07:58:57 GetSingleValue result=40 Value=cccccccc 07:58:57 SkyScan query 07:58:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 07:58:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:58 Parameters OK 07:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:58 Set A/D data flow result=40 07:58:58 Set A/D channel type result=40 07:58:58 Set A/D encoding result=40 07:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:58 Set channel filter=0.000000e+000 result=40 07:58:58 Config A/D Result=40 07:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:58 Get A/D filter: -9.255963e+061 result=40 07:58:58 Get A/D value=-858993460 result=40 07:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:58 Parameters OK 07:58:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:58 Set A/D data flow result=40 07:58:58 Set A/D channel type result=40 07:58:58 Set A/D encoding result=40 07:58:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:58 Set channel filter=0.000000e+000 result=40 07:58:58 Config A/D Result=40 07:58:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:58 Get A/D filter: -9.255963e+061 result=40 07:58:58 Get A/D value=-858993460 result=40 07:58:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:58 Aux= 07:58:58 Message to Camera, serial 270259 queued 07:59:34 Received message from Master: op=PointingHead serial=270272 07:59:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 07:59:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 07:59:35 Point started: ret=0 07:59:35 point_skyscan result=0 07:59:36 Check angles 07:59:36 SkyScan query 07:59:36 SkyScan query done: ret=0 az=152.595<-10173 ze=6.51<-11566 Statuses=0009 0008 07:59:36 Msec=0 True Az=152.595 Ze=6.51 Az status=0009 Ze status=0008 07:59:36 Check angles 07:59:36 SkyScan query 07:59:37 SkyScan query done: ret=0 az=135.09<-9006 ze=6.495<-11567 Statuses=0009 0008 07:59:37 Msec=750 True Az=135.09 Ze=6.495 Az status=0009 Ze status=0008 07:59:37 Check angles 07:59:37 SkyScan query 07:59:38 SkyScan query done: ret=0 az=117.15<-7810 ze=6.495<-11567 Statuses=0009 0008 07:59:38 Msec=1500 True Az=117.15 Ze=6.495 Az status=0009 Ze status=0008 07:59:38 Check angles 07:59:38 SkyScan query 07:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:59:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 07:59:38 Message to Master queued w/err=0: serial=270272 error=0 07:59:43 Received message from Master: op=Filter serial=270273 07:59:43 Color wheel filter change from 0 to 0 07:59:43 FLIGetFilterPos err=0 currentPosition=0 07:59:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:43 Filter is already there-color wheel unchanged 07:59:44 Received message from Master: op=Shutter serial=270274 07:59:44 Shutter LASER close 07:59:44 Received message from Camera: op=State serial=270276 07:59:44 GetSingleValue result=40 Value=cccccccc 07:59:44 SkyScan query 07:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 07:59:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:44 Parameters OK 07:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:44 Set A/D data flow result=40 07:59:44 Set A/D channel type result=40 07:59:44 Set A/D encoding result=40 07:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:44 Set channel filter=0.000000e+000 result=40 07:59:44 Config A/D Result=40 07:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:44 Get A/D filter: -9.255963e+061 result=40 07:59:44 Get A/D value=-858993460 result=40 07:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:44 Parameters OK 07:59:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:44 Set A/D data flow result=40 07:59:44 Set A/D channel type result=40 07:59:44 Set A/D encoding result=40 07:59:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:44 Set channel filter=0.000000e+000 result=40 07:59:44 Config A/D Result=40 07:59:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:44 Get A/D filter: -9.255963e+061 result=40 07:59:44 Get A/D value=-858993460 result=40 07:59:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:44 Aux= 07:59:44 Message to Camera, serial 270276 queued 08:00:21 Received message from Master: op=PointingHead serial=270289 08:00:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:00:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:00:21 Point started: ret=0 08:00:21 point_skyscan result=0 08:00:22 Check angles 08:00:22 SkyScan query 08:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 08:00:23 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 08:00:23 Check angles 08:00:23 SkyScan query 08:00:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 08:00:23 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 08:00:24 Check angles 08:00:24 SkyScan query 08:00:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 08:00:24 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 08:00:24 Check angles 08:00:24 SkyScan query 08:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 08:00:25 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 08:00:25 Check angles 08:00:25 SkyScan query 08:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.89<-19126 Statuses=0008 0009 08:00:26 Msec=3000 True Az=112.995 Ze=-106.89 Az status=0008 Ze status=0009 08:00:26 Check angles 08:00:26 SkyScan query 08:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 08:00:26 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 08:00:27 Check angles 08:00:27 SkyScan query 08:00:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 08:00:27 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 08:00:27 Check angles 08:00:27 SkyScan query 08:00:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 08:00:28 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 08:00:28 Check angles 08:00:28 SkyScan query 08:00:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:00:29 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:00:29 Message to Master queued w/err=0: serial=270289 error=0 08:00:34 Received message from Master: op=Filter serial=270290 08:00:34 Color wheel filter change from 0 to 0 08:00:34 FLIGetFilterPos err=0 currentPosition=0 08:00:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:34 Filter is already there-color wheel unchanged 08:00:34 Received message from Master: op=Shutter serial=270291 08:00:34 Shutter LASER open 08:00:34 Received message from Camera: op=State serial=270293 08:00:34 GetSingleValue result=40 Value=cccccccc 08:00:34 SkyScan query 08:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:00:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:35 Parameters OK 08:00:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:35 Set A/D data flow result=40 08:00:35 Set A/D channel type result=40 08:00:35 Set A/D encoding result=40 08:00:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:35 Set channel filter=0.000000e+000 result=40 08:00:35 Config A/D Result=40 08:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:35 Get A/D filter: -9.255963e+061 result=40 08:00:35 Get A/D value=-858993460 result=40 08:00:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:35 Parameters OK 08:00:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:35 Set A/D data flow result=40 08:00:35 Set A/D channel type result=40 08:00:35 Set A/D encoding result=40 08:00:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:35 Set channel filter=0.000000e+000 result=40 08:00:35 Config A/D Result=40 08:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:35 Get A/D filter: -9.255963e+061 result=40 08:00:35 Get A/D value=-858993460 result=40 08:00:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:35 Aux= 08:00:35 Message to Camera, serial 270293 queued 08:00:43 Received message from Master: op=Shutter serial=270303 08:00:43 Shutter LASER close 08:00:44 Received message from Master: op=PointingHead serial=270307 08:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:00:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:00:44 Point started: ret=0 08:00:44 point_skyscan result=0 08:00:45 Check angles 08:00:45 SkyScan query 08:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.04<-21536 Statuses=0008 0009 08:00:45 Msec=0 True Az=112.995 Ze=-143.04 Az status=0008 Ze status=0009 08:00:45 Check angles 08:00:45 SkyScan query 08:00:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 08:00:46 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 08:00:46 Check angles 08:00:46 SkyScan query 08:00:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.665<-18711 Statuses=0008 0009 08:00:47 Msec=1500 True Az=112.995 Ze=-100.665 Az status=0008 Ze status=0009 08:00:47 Check angles 08:00:47 SkyScan query 08:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 08:00:48 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 08:00:48 Check angles 08:00:48 SkyScan query 08:00:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 08:00:48 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 08:00:48 Check angles 08:00:48 SkyScan query 08:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 08:00:49 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 08:00:49 Check angles 08:00:49 SkyScan query 08:00:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.395<-13093 Statuses=0008 0009 08:00:50 Msec=4500 True Az=112.995 Ze=-16.395 Az status=0008 Ze status=0009 08:00:50 Check angles 08:00:50 SkyScan query 08:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 08:00:51 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 08:00:51 Check angles 08:00:51 SkyScan query 08:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:00:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:00:51 Message to Master queued w/err=0: serial=270307 error=0 08:00:56 Received message from Master: op=Filter serial=270308 08:00:56 Color wheel filter change from 0 to 0 08:00:56 FLIGetFilterPos err=0 currentPosition=0 08:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:56 Filter is already there-color wheel unchanged 08:00:56 Received message from Master: op=Shutter serial=270309 08:00:56 Shutter LASER close 08:00:57 Received message from Camera: op=State serial=270311 08:00:57 GetSingleValue result=40 Value=cccccccc 08:00:57 SkyScan query 08:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:57 Parameters OK 08:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:57 Set A/D data flow result=40 08:00:57 Set A/D channel type result=40 08:00:57 Set A/D encoding result=40 08:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:57 Set channel filter=0.000000e+000 result=40 08:00:57 Config A/D Result=40 08:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:57 Get A/D filter: -9.255963e+061 result=40 08:00:57 Get A/D value=-858993460 result=40 08:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:57 Parameters OK 08:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:57 Set A/D data flow result=40 08:00:57 Set A/D channel type result=40 08:00:57 Set A/D encoding result=40 08:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:57 Set channel filter=0.000000e+000 result=40 08:00:57 Config A/D Result=40 08:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:57 Get A/D filter: -9.255963e+061 result=40 08:00:57 Get A/D value=-858993460 result=40 08:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:57 Aux= 08:00:57 Message to Camera, serial 270311 queued 08:01:34 Received message from Master: op=PointingHead serial=270324 08:01:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:01:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:01:34 Point started: ret=0 08:01:34 point_skyscan result=0 08:01:35 Check angles 08:01:35 SkyScan query 08:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:01:36 Message to Master queued w/err=0: serial=270324 error=0 08:01:41 Received message from Master: op=Filter serial=270325 08:01:41 Color wheel filter change from 0 to 0 08:01:41 FLIGetFilterPos err=0 currentPosition=0 08:01:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:41 Filter is already there-color wheel unchanged 08:01:41 Received message from Master: op=Shutter serial=270326 08:01:41 Shutter LASER close 08:01:41 Received message from Camera: op=State serial=270328 08:01:41 GetSingleValue result=40 Value=cccccccc 08:01:41 SkyScan query 08:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:01:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:42 Parameters OK 08:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:42 Set A/D data flow result=40 08:01:42 Set A/D channel type result=40 08:01:42 Set A/D encoding result=40 08:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:42 Set channel filter=0.000000e+000 result=40 08:01:42 Config A/D Result=40 08:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:42 Get A/D filter: -9.255963e+061 result=40 08:01:42 Get A/D value=-858993460 result=40 08:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:42 Parameters OK 08:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:42 Set A/D data flow result=40 08:01:42 Set A/D channel type result=40 08:01:42 Set A/D encoding result=40 08:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:42 Set channel filter=0.000000e+000 result=40 08:01:42 Config A/D Result=40 08:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:42 Get A/D filter: -9.255963e+061 result=40 08:01:42 Get A/D value=-858993460 result=40 08:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:42 Aux= 08:01:42 Message to Camera, serial 270328 queued 08:02:18 Received message from Master: op=PointingHead serial=270341 08:02:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:02:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:02:19 Point started: ret=0 08:02:19 point_skyscan result=0 08:02:19 Check angles 08:02:19 SkyScan query 08:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:02:20 Message to Master queued w/err=0: serial=270341 error=0 08:02:25 Received message from Master: op=Filter serial=270342 08:02:25 Color wheel filter change from 0 to 0 08:02:25 FLIGetFilterPos err=0 currentPosition=0 08:02:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:25 Filter is already there-color wheel unchanged 08:02:25 Received message from Master: op=Shutter serial=270343 08:02:25 Shutter LASER close 08:02:25 Received message from Camera: op=State serial=270345 08:02:25 GetSingleValue result=40 Value=cccccccc 08:02:25 SkyScan query 08:02:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:02:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:26 Parameters OK 08:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:26 Set A/D data flow result=40 08:02:26 Set A/D channel type result=40 08:02:26 Set A/D encoding result=40 08:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:26 Set channel filter=0.000000e+000 result=40 08:02:26 Config A/D Result=40 08:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:26 Get A/D filter: -9.255963e+061 result=40 08:02:26 Get A/D value=-858993460 result=40 08:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:26 Parameters OK 08:02:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:26 Set A/D data flow result=40 08:02:26 Set A/D channel type result=40 08:02:26 Set A/D encoding result=40 08:02:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:26 Set channel filter=0.000000e+000 result=40 08:02:26 Config A/D Result=40 08:02:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:26 Get A/D filter: -9.255963e+061 result=40 08:02:26 Get A/D value=-858993460 result=40 08:02:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:26 Aux= 08:02:26 Message to Camera, serial 270345 queued 08:03:03 Received message from Master: op=PointingHead serial=270358 08:03:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:03:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:03:03 Point started: ret=0 08:03:03 point_skyscan result=0 08:03:04 Check angles 08:03:04 SkyScan query 08:03:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:03:04 Message to Master queued w/err=0: serial=270358 error=0 08:03:09 Received message from Master: op=Filter serial=270359 08:03:09 Color wheel filter change from 0 to 0 08:03:09 FLIGetFilterPos err=0 currentPosition=0 08:03:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:09 Filter is already there-color wheel unchanged 08:03:09 Received message from Master: op=Shutter serial=270360 08:03:09 Shutter LASER close 08:03:10 Received message from Camera: op=State serial=270362 08:03:10 GetSingleValue result=40 Value=cccccccc 08:03:10 SkyScan query 08:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:03:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:10 Parameters OK 08:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:10 Set A/D data flow result=40 08:03:10 Set A/D channel type result=40 08:03:10 Set A/D encoding result=40 08:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:10 Set channel filter=0.000000e+000 result=40 08:03:10 Config A/D Result=40 08:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:10 Get A/D filter: -9.255963e+061 result=40 08:03:10 Get A/D value=-858993460 result=40 08:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:10 Parameters OK 08:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:10 Set A/D data flow result=40 08:03:10 Set A/D channel type result=40 08:03:10 Set A/D encoding result=40 08:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:10 Set channel filter=0.000000e+000 result=40 08:03:10 Config A/D Result=40 08:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:10 Get A/D filter: -9.255963e+061 result=40 08:03:10 Get A/D value=-858993460 result=40 08:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:10 Aux= 08:03:10 Message to Camera, serial 270362 queued 08:03:35 Received message from Master: op=Identify serial=270363 08:03:47 Received message from Master: op=PointingHead serial=270378 08:03:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:03:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:03:47 Point started: ret=0 08:03:47 point_skyscan result=0 [UTC 2019-3-14 08:03:48] 08:03:48 Check angles 08:03:48 SkyScan query 08:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.985<-13599 Statuses=0008 0009 08:03:49 Msec=0 True Az=112.995 Ze=-23.985 Az status=0008 Ze status=0009 08:03:49 Check angles 08:03:49 SkyScan query 08:03:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.91<-14994 Statuses=0008 0009 08:03:49 Msec=750 True Az=112.995 Ze=-44.91 Az status=0008 Ze status=0009 08:03:50 Check angles 08:03:50 SkyScan query 08:03:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 08:03:50 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 08:03:50 Check angles 08:03:50 SkyScan query 08:03:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 08:03:51 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 08:03:51 Check angles 08:03:51 SkyScan query 08:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 08:03:52 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 08:03:52 Check angles 08:03:52 SkyScan query 08:03:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 08:03:52 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 08:03:53 Check angles 08:03:53 SkyScan query 08:03:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 08:03:53 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 08:03:53 Check angles 08:03:53 SkyScan query 08:03:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 08:03:54 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 08:03:54 Check angles 08:03:54 SkyScan query 08:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:03:55 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:03:55 Message to Master queued w/err=0: serial=270378 error=0 08:04:00 Received message from Master: op=Filter serial=270379 08:04:00 Color wheel filter change from 0 to 0 08:04:00 FLIGetFilterPos err=0 currentPosition=0 08:04:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:00 Filter is already there-color wheel unchanged 08:04:00 Received message from Master: op=Shutter serial=270380 08:04:00 Shutter LASER open 08:04:00 Received message from Camera: op=State serial=270382 08:04:00 GetSingleValue result=40 Value=cccccccc 08:04:00 SkyScan query 08:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:04:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:01 Parameters OK 08:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:01 Set A/D data flow result=40 08:04:01 Set A/D channel type result=40 08:04:01 Set A/D encoding result=40 08:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:01 Set channel filter=0.000000e+000 result=40 08:04:01 Config A/D Result=40 08:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:01 Get A/D filter: -9.255963e+061 result=40 08:04:01 Get A/D value=-858993460 result=40 08:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:01 Parameters OK 08:04:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:01 Set A/D data flow result=40 08:04:01 Set A/D channel type result=40 08:04:01 Set A/D encoding result=40 08:04:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:01 Set channel filter=0.000000e+000 result=40 08:04:01 Config A/D Result=40 08:04:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:01 Get A/D filter: -9.255963e+061 result=40 08:04:01 Get A/D value=-858993460 result=40 08:04:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:01 Aux= 08:04:01 Message to Camera, serial 270382 queued 08:04:08 Received message from Master: op=Shutter serial=270391 08:04:08 Shutter LASER close 08:04:09 Received message from Master: op=PointingHead serial=270395 08:04:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:09 Point started: ret=0 08:04:09 point_skyscan result=0 08:04:10 Check angles 08:04:10 SkyScan query 08:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 08:04:10 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 08:04:11 Check angles 08:04:11 SkyScan query 08:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 08:04:11 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 08:04:11 Check angles 08:04:11 SkyScan query 08:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 08:04:12 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 08:04:12 Check angles 08:04:12 SkyScan query 08:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 08:04:13 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 08:04:13 Check angles 08:04:13 SkyScan query 08:04:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 08:04:13 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 08:04:14 Check angles 08:04:14 SkyScan query 08:04:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 08:04:14 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 08:04:14 Check angles 08:04:14 SkyScan query 08:04:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.325<-13155 Statuses=0008 0009 08:04:15 Msec=4500 True Az=112.995 Ze=-17.325 Az status=0008 Ze status=0009 08:04:15 Check angles 08:04:15 SkyScan query 08:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 08:04:16 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 08:04:16 Check angles 08:04:16 SkyScan query 08:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:04:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:04:16 Message to Master queued w/err=0: serial=270395 error=0 08:04:21 Received message from Master: op=Filter serial=270396 08:04:21 Color wheel filter change from 0 to 0 08:04:21 FLIGetFilterPos err=0 currentPosition=0 08:04:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:21 Filter is already there-color wheel unchanged 08:04:22 Received message from Master: op=Shutter serial=270397 08:04:22 Shutter LASER close 08:04:22 Received message from Camera: op=State serial=270399 08:04:22 GetSingleValue result=40 Value=cccccccc 08:04:22 SkyScan query 08:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:04:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:22 Parameters OK 08:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:22 Set A/D data flow result=40 08:04:22 Set A/D channel type result=40 08:04:22 Set A/D encoding result=40 08:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:22 Set channel filter=0.000000e+000 result=40 08:04:22 Config A/D Result=40 08:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:22 Get A/D filter: -9.255963e+061 result=40 08:04:22 Get A/D value=-858993460 result=40 08:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:22 Parameters OK 08:04:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:22 Set A/D data flow result=40 08:04:22 Set A/D channel type result=40 08:04:22 Set A/D encoding result=40 08:04:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:22 Set channel filter=0.000000e+000 result=40 08:04:22 Config A/D Result=40 08:04:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:22 Get A/D filter: -9.255963e+061 result=40 08:04:22 Get A/D value=-858993460 result=40 08:04:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:22 Aux= 08:04:22 Message to Camera, serial 270399 queued 08:04:59 Received message from Master: op=PointingHead serial=270412 08:04:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:04:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:04:59 Point started: ret=0 08:04:59 point_skyscan result=0 08:05:00 Check angles 08:05:00 SkyScan query 08:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:05:01 Message to Master queued w/err=0: serial=270412 error=0 08:05:06 Received message from Master: op=Filter serial=270413 08:05:06 Color wheel filter change from 0 to 0 08:05:06 FLIGetFilterPos err=0 currentPosition=0 08:05:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:06 Filter is already there-color wheel unchanged 08:05:06 Received message from Master: op=Shutter serial=270414 08:05:06 Shutter LASER close 08:05:06 Received message from Camera: op=State serial=270416 08:05:06 GetSingleValue result=40 Value=cccccccc 08:05:06 SkyScan query 08:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:05:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:07 Parameters OK 08:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:07 Set A/D data flow result=40 08:05:07 Set A/D channel type result=40 08:05:07 Set A/D encoding result=40 08:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:07 Set channel filter=0.000000e+000 result=40 08:05:07 Config A/D Result=40 08:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:07 Get A/D filter: -9.255963e+061 result=40 08:05:07 Get A/D value=-858993460 result=40 08:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:07 Parameters OK 08:05:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:07 Set A/D data flow result=40 08:05:07 Set A/D channel type result=40 08:05:07 Set A/D encoding result=40 08:05:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:07 Set channel filter=0.000000e+000 result=40 08:05:07 Config A/D Result=40 08:05:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:07 Get A/D filter: -9.255963e+061 result=40 08:05:07 Get A/D value=-858993460 result=40 08:05:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:07 Aux= 08:05:07 Message to Camera, serial 270416 queued 08:05:43 Received message from Master: op=PointingHead serial=270428 08:05:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:05:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:05:43 Point started: ret=0 08:05:43 point_skyscan result=0 08:05:44 Check angles 08:05:44 SkyScan query 08:05:44 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 08:05:44 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 08:05:44 Check angles 08:05:44 SkyScan query 08:05:45 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 08:05:45 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 08:05:45 Check angles 08:05:45 SkyScan query 08:05:46 SkyScan query done: ret=0 az=171.54<-11436 ze=-6.495<-12433 Statuses=0009 0008 08:05:46 Msec=1500 True Az=171.54 Ze=-6.495 Az status=0009 Ze status=0008 08:05:46 Check angles 08:05:46 SkyScan query 08:05:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:05:46 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:05:46 Message to Master queued w/err=0: serial=270428 error=0 08:05:51 Received message from Master: op=Filter serial=270429 08:05:51 Color wheel filter change from 0 to 0 08:05:51 FLIGetFilterPos err=0 currentPosition=0 08:05:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:51 Filter is already there-color wheel unchanged 08:05:52 Received message from Master: op=Shutter serial=270430 08:05:52 Shutter LASER close 08:05:52 Received message from Camera: op=State serial=270432 08:05:52 GetSingleValue result=40 Value=cccccccc 08:05:52 SkyScan query 08:05:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:05:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:52 Parameters OK 08:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:52 Set A/D data flow result=40 08:05:52 Set A/D channel type result=40 08:05:52 Set A/D encoding result=40 08:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:52 Set channel filter=0.000000e+000 result=40 08:05:52 Config A/D Result=40 08:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:52 Get A/D filter: -9.255963e+061 result=40 08:05:52 Get A/D value=-858993460 result=40 08:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:52 Parameters OK 08:05:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:52 Set A/D data flow result=40 08:05:52 Set A/D channel type result=40 08:05:52 Set A/D encoding result=40 08:05:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:52 Set channel filter=0.000000e+000 result=40 08:05:52 Config A/D Result=40 08:05:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:52 Get A/D filter: -9.255963e+061 result=40 08:05:52 Get A/D value=-858993460 result=40 08:05:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:52 Aux= 08:05:52 Message to Camera, serial 270432 queued 08:06:29 Received message from Master: op=PointingHead serial=270445 08:06:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:06:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:06:29 Point started: ret=0 08:06:29 point_skyscan result=0 08:06:30 Check angles 08:06:30 SkyScan query 08:06:31 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 08:06:31 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 08:06:31 Check angles 08:06:31 SkyScan query 08:06:32 SkyScan query done: ret=0 az=134.76<-8984 ze=6.495<-11567 Statuses=0009 0008 08:06:32 Msec=750 True Az=134.76 Ze=6.495 Az status=0009 Ze status=0008 08:06:32 Check angles 08:06:32 SkyScan query 08:06:32 SkyScan query done: ret=0 az=116.985<-7799 ze=6.495<-11567 Statuses=0009 0008 08:06:32 Msec=1500 True Az=116.985 Ze=6.495 Az status=0009 Ze status=0008 08:06:33 Check angles 08:06:33 SkyScan query 08:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:06:33 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:06:33 Message to Master queued w/err=0: serial=270445 error=0 08:06:38 Received message from Master: op=Filter serial=270446 08:06:38 Color wheel filter change from 0 to 0 08:06:38 FLIGetFilterPos err=0 currentPosition=0 08:06:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:38 Filter is already there-color wheel unchanged 08:06:38 Received message from Master: op=Shutter serial=270447 08:06:38 Shutter LASER close 08:06:38 Received message from Camera: op=State serial=270449 08:06:38 GetSingleValue result=40 Value=cccccccc 08:06:38 SkyScan query 08:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:06:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:39 Parameters OK 08:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:39 Set A/D data flow result=40 08:06:39 Set A/D channel type result=40 08:06:39 Set A/D encoding result=40 08:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:39 Set channel filter=0.000000e+000 result=40 08:06:39 Config A/D Result=40 08:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:39 Get A/D filter: -9.255963e+061 result=40 08:06:39 Get A/D value=-858993460 result=40 08:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:39 Parameters OK 08:06:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:39 Set A/D data flow result=40 08:06:39 Set A/D channel type result=40 08:06:39 Set A/D encoding result=40 08:06:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:39 Set channel filter=0.000000e+000 result=40 08:06:39 Config A/D Result=40 08:06:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:39 Get A/D filter: -9.255963e+061 result=40 08:06:39 Get A/D value=-858993460 result=40 08:06:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:39 Aux= 08:06:39 Message to Camera, serial 270449 queued 08:07:16 Received message from Master: op=PointingHead serial=270462 08:07:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:07:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:07:16 Point started: ret=0 08:07:16 point_skyscan result=0 08:07:17 Check angles 08:07:17 SkyScan query 08:07:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 08:07:17 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 08:07:18 Check angles 08:07:18 SkyScan query 08:07:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 08:07:18 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 08:07:18 Check angles 08:07:18 SkyScan query 08:07:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 08:07:19 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 08:07:19 Check angles 08:07:19 SkyScan query 08:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 08:07:20 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 08:07:20 Check angles 08:07:20 SkyScan query 08:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.76<-19184 Statuses=0008 0009 08:07:20 Msec=3000 True Az=112.995 Ze=-107.76 Az status=0008 Ze status=0009 08:07:21 Check angles 08:07:21 SkyScan query 08:07:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 08:07:21 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 08:07:21 Check angles 08:07:21 SkyScan query 08:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 08:07:22 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 08:07:22 Check angles 08:07:22 SkyScan query 08:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 08:07:23 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 08:07:23 Check angles 08:07:23 SkyScan query 08:07:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:07:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:07:23 Message to Master queued w/err=0: serial=270462 error=0 08:07:28 Received message from Master: op=Filter serial=270463 08:07:28 Color wheel filter change from 0 to 0 08:07:28 FLIGetFilterPos err=0 currentPosition=0 08:07:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:28 Filter is already there-color wheel unchanged 08:07:29 Received message from Master: op=Shutter serial=270464 08:07:29 Shutter LASER open 08:07:29 Received message from Camera: op=State serial=270466 08:07:29 GetSingleValue result=40 Value=cccccccc 08:07:29 SkyScan query 08:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:07:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:29 Parameters OK 08:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:29 Set A/D data flow result=40 08:07:29 Set A/D channel type result=40 08:07:29 Set A/D encoding result=40 08:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:29 Set channel filter=0.000000e+000 result=40 08:07:29 Config A/D Result=40 08:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:29 Get A/D filter: -9.255963e+061 result=40 08:07:29 Get A/D value=-858993460 result=40 08:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:29 Parameters OK 08:07:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:29 Set A/D data flow result=40 08:07:29 Set A/D channel type result=40 08:07:29 Set A/D encoding result=40 08:07:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:29 Set channel filter=0.000000e+000 result=40 08:07:29 Config A/D Result=40 08:07:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:29 Get A/D filter: -9.255963e+061 result=40 08:07:29 Get A/D value=-858993460 result=40 08:07:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:29 Aux= 08:07:29 Message to Camera, serial 270466 queued 08:07:38 Received message from Master: op=Shutter serial=270476 08:07:38 Shutter LASER close 08:07:38 Received message from Master: op=PointingHead serial=270480 08:07:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:07:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:07:39 Point started: ret=0 08:07:39 point_skyscan result=0 08:07:39 Check angles 08:07:39 SkyScan query 08:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 08:07:40 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 08:07:40 Check angles 08:07:40 SkyScan query 08:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 08:07:41 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 08:07:41 Check angles 08:07:41 SkyScan query 08:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 08:07:41 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 08:07:42 Check angles 08:07:42 SkyScan query 08:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 08:07:42 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 08:07:42 Check angles 08:07:42 SkyScan query 08:07:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.58<-15972 Statuses=0008 0009 08:07:43 Msec=3000 True Az=112.995 Ze=-59.58 Az status=0008 Ze status=0009 08:07:43 Check angles 08:07:43 SkyScan query 08:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.61<-14574 Statuses=0008 0009 08:07:44 Msec=3750 True Az=112.995 Ze=-38.61 Az status=0008 Ze status=0009 08:07:44 Check angles 08:07:44 SkyScan query 08:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.655<-13177 Statuses=0008 0009 08:07:44 Msec=4500 True Az=112.995 Ze=-17.655 Az status=0008 Ze status=0009 08:07:45 Check angles 08:07:45 SkyScan query 08:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 08:07:45 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 08:07:45 Check angles 08:07:45 SkyScan query 08:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:07:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:07:46 Message to Master queued w/err=0: serial=270480 error=0 08:07:51 Received message from Master: op=Filter serial=270481 08:07:51 Color wheel filter change from 0 to 0 08:07:51 FLIGetFilterPos err=0 currentPosition=0 08:07:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:51 Filter is already there-color wheel unchanged 08:07:51 Received message from Master: op=Shutter serial=270482 08:07:51 Shutter LASER close 08:07:51 Received message from Camera: op=State serial=270484 08:07:51 GetSingleValue result=40 Value=cccccccc 08:07:51 SkyScan query 08:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:07:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:52 Parameters OK 08:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:52 Set A/D data flow result=40 08:07:52 Set A/D channel type result=40 08:07:52 Set A/D encoding result=40 08:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:52 Set channel filter=0.000000e+000 result=40 08:07:52 Config A/D Result=40 08:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:52 Get A/D filter: -9.255963e+061 result=40 08:07:52 Get A/D value=-858993460 result=40 08:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:52 Parameters OK 08:07:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:52 Set A/D data flow result=40 08:07:52 Set A/D channel type result=40 08:07:52 Set A/D encoding result=40 08:07:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:52 Set channel filter=0.000000e+000 result=40 08:07:52 Config A/D Result=40 08:07:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:52 Get A/D filter: -9.255963e+061 result=40 08:07:52 Get A/D value=-858993460 result=40 08:07:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:52 Aux= 08:07:52 Message to Camera, serial 270484 queued 08:08:29 Received message from Master: op=PointingHead serial=270497 08:08:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:08:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:08:29 Point started: ret=0 08:08:29 point_skyscan result=0 08:08:30 Check angles 08:08:30 SkyScan query 08:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:08:30 Message to Master queued w/err=0: serial=270497 error=0 08:08:35 Received message from Master: op=Filter serial=270498 08:08:35 Color wheel filter change from 0 to 0 08:08:35 FLIGetFilterPos err=0 currentPosition=0 08:08:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:35 Filter is already there-color wheel unchanged 08:08:36 Received message from Master: op=Shutter serial=270499 08:08:36 Shutter LASER close 08:08:36 Received message from Camera: op=State serial=270501 08:08:36 GetSingleValue result=40 Value=cccccccc 08:08:36 SkyScan query 08:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:08:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:36 Parameters OK 08:08:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:36 Set A/D data flow result=40 08:08:36 Set A/D channel type result=40 08:08:36 Set A/D encoding result=40 08:08:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:36 Set channel filter=0.000000e+000 result=40 08:08:36 Config A/D Result=40 08:08:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:36 Get A/D filter: -9.255963e+061 result=40 08:08:36 Get A/D value=-858993460 result=40 08:08:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:36 Parameters OK 08:08:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:36 Set A/D data flow result=40 08:08:36 Set A/D channel type result=40 08:08:36 Set A/D encoding result=40 08:08:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:36 Set channel filter=0.000000e+000 result=40 08:08:36 Config A/D Result=40 08:08:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:36 Get A/D filter: -9.255963e+061 result=40 08:08:36 Get A/D value=-858993460 result=40 08:08:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:36 Aux= 08:08:36 Message to Camera, serial 270501 queued 08:09:13 Received message from Master: op=PointingHead serial=270514 08:09:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:09:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:09:13 Point started: ret=0 08:09:13 point_skyscan result=0 08:09:14 Check angles 08:09:14 SkyScan query 08:09:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:09:15 Message to Master queued w/err=0: serial=270514 error=0 08:09:20 Received message from Master: op=Filter serial=270515 08:09:20 Color wheel filter change from 0 to 0 08:09:20 FLIGetFilterPos err=0 currentPosition=0 08:09:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:20 Filter is already there-color wheel unchanged 08:09:20 Received message from Master: op=Shutter serial=270516 08:09:20 Shutter LASER close 08:09:20 Received message from Camera: op=State serial=270518 08:09:20 GetSingleValue result=40 Value=cccccccc 08:09:20 SkyScan query 08:09:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:20 Parameters OK 08:09:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:20 Set A/D data flow result=40 08:09:20 Set A/D channel type result=40 08:09:20 Set A/D encoding result=40 08:09:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:20 Set channel filter=0.000000e+000 result=40 08:09:20 Config A/D Result=40 08:09:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:20 Get A/D filter: -9.255963e+061 result=40 08:09:20 Get A/D value=-858993460 result=40 08:09:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:20 Parameters OK 08:09:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:20 Set A/D data flow result=40 08:09:20 Set A/D channel type result=40 08:09:20 Set A/D encoding result=40 08:09:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:20 Set channel filter=0.000000e+000 result=40 08:09:20 Config A/D Result=40 08:09:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:20 Get A/D filter: -9.255963e+061 result=40 08:09:20 Get A/D value=-858993460 result=40 08:09:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:20 Aux= 08:09:20 Message to Camera, serial 270518 queued 08:09:57 Received message from Master: op=PointingHead serial=270531 08:09:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:09:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:09:58 Point started: ret=0 08:09:58 point_skyscan result=0 08:09:58 Check angles 08:09:58 SkyScan query 08:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:09:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:09:59 Message to Master queued w/err=0: serial=270531 error=0 08:10:04 Received message from Master: op=Filter serial=270532 08:10:04 Color wheel filter change from 0 to 0 08:10:04 FLIGetFilterPos err=0 currentPosition=0 08:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:04 Filter is already there-color wheel unchanged 08:10:04 Received message from Master: op=Shutter serial=270533 08:10:04 Shutter LASER close 08:10:04 Received message from Camera: op=State serial=270535 08:10:04 GetSingleValue result=40 Value=cccccccc 08:10:04 SkyScan query 08:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:05 Parameters OK 08:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:05 Set A/D data flow result=40 08:10:05 Set A/D channel type result=40 08:10:05 Set A/D encoding result=40 08:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:05 Set channel filter=0.000000e+000 result=40 08:10:05 Config A/D Result=40 08:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:05 Get A/D filter: -9.255963e+061 result=40 08:10:05 Get A/D value=-858993460 result=40 08:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:05 Parameters OK 08:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:05 Set A/D data flow result=40 08:10:05 Set A/D channel type result=40 08:10:05 Set A/D encoding result=40 08:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:05 Set channel filter=0.000000e+000 result=40 08:10:05 Config A/D Result=40 08:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:05 Get A/D filter: -9.255963e+061 result=40 08:10:05 Get A/D value=-858993460 result=40 08:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:05 Aux= 08:10:05 Message to Camera, serial 270535 queued 08:10:41 Received message from Master: op=PointingHead serial=270547 08:10:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:10:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:10:41 Point started: ret=0 08:10:41 point_skyscan result=0 08:10:42 Check angles 08:10:42 SkyScan query 08:10:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 08:10:42 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 08:10:43 Check angles 08:10:43 SkyScan query 08:10:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 08:10:43 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 08:10:43 Check angles 08:10:43 SkyScan query 08:10:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 08:10:44 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 08:10:44 Check angles 08:10:44 SkyScan query 08:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 08:10:45 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 08:10:45 Check angles 08:10:45 SkyScan query 08:10:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 08:10:45 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 08:10:46 Check angles 08:10:46 SkyScan query 08:10:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.255<-20617 Statuses=0008 0009 08:10:46 Msec=3750 True Az=112.995 Ze=-129.255 Az status=0008 Ze status=0009 08:10:46 Check angles 08:10:46 SkyScan query 08:10:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.195<-22013 Statuses=0008 0009 08:10:47 Msec=4500 True Az=112.995 Ze=-150.195 Az status=0008 Ze status=0009 08:10:47 Check angles 08:10:47 SkyScan query 08:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 08:10:48 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 08:10:48 Check angles 08:10:48 SkyScan query 08:10:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:10:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:10:48 Message to Master queued w/err=0: serial=270547 error=0 08:10:53 Received message from Master: op=Filter serial=270548 08:10:53 Color wheel filter change from 0 to 0 08:10:53 FLIGetFilterPos err=0 currentPosition=0 08:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:53 Filter is already there-color wheel unchanged 08:10:54 Received message from Master: op=Shutter serial=270549 08:10:54 Shutter LASER open 08:10:54 Received message from Camera: op=State serial=270551 08:10:54 GetSingleValue result=40 Value=cccccccc 08:10:54 SkyScan query 08:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:10:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:54 Parameters OK 08:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:54 Set A/D data flow result=40 08:10:54 Set A/D channel type result=40 08:10:54 Set A/D encoding result=40 08:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:54 Set channel filter=0.000000e+000 result=40 08:10:54 Config A/D Result=40 08:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:54 Get A/D filter: -9.255963e+061 result=40 08:10:54 Get A/D value=-858993460 result=40 08:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:54 Parameters OK 08:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:54 Set A/D data flow result=40 08:10:54 Set A/D channel type result=40 08:10:54 Set A/D encoding result=40 08:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:54 Set channel filter=0.000000e+000 result=40 08:10:54 Config A/D Result=40 08:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:54 Get A/D filter: -9.255963e+061 result=40 08:10:54 Get A/D value=-858993460 result=40 08:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:54 Aux= 08:10:54 Message to Camera, serial 270551 queued 08:11:03 Received message from Master: op=Shutter serial=270561 08:11:03 Shutter LASER close 08:11:03 Received message from Master: op=PointingHead serial=270565 08:11:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:04 Point started: ret=0 08:11:04 point_skyscan result=0 08:11:04 Check angles 08:11:04 SkyScan query 08:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.355<-21557 Statuses=0008 0009 08:11:05 Msec=0 True Az=112.995 Ze=-143.355 Az status=0008 Ze status=0009 08:11:05 Check angles 08:11:05 SkyScan query 08:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 08:11:06 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 08:11:06 Check angles 08:11:06 SkyScan query 08:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 08:11:06 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 08:11:07 Check angles 08:11:07 SkyScan query 08:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 08:11:07 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 08:11:07 Check angles 08:11:07 SkyScan query 08:11:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.115<-15941 Statuses=0008 0009 08:11:08 Msec=3000 True Az=112.995 Ze=-59.115 Az status=0008 Ze status=0009 08:11:08 Check angles 08:11:08 SkyScan query 08:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.085<-14539 Statuses=0008 0009 08:11:09 Msec=3750 True Az=112.995 Ze=-38.085 Az status=0008 Ze status=0009 08:11:09 Check angles 08:11:09 SkyScan query 08:11:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.16<-13144 Statuses=0008 0009 08:11:09 Msec=4500 True Az=112.995 Ze=-17.16 Az status=0008 Ze status=0009 08:11:10 Check angles 08:11:10 SkyScan query 08:11:10 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 08:11:10 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 08:11:10 Check angles 08:11:10 SkyScan query 08:11:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:11:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:11:11 Message to Master queued w/err=0: serial=270565 error=0 08:11:16 Received message from Master: op=Filter serial=270566 08:11:16 Color wheel filter change from 0 to 0 08:11:16 FLIGetFilterPos err=0 currentPosition=0 08:11:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:16 Filter is already there-color wheel unchanged 08:11:16 Received message from Master: op=Shutter serial=270567 08:11:16 Shutter LASER close 08:11:16 Received message from Camera: op=State serial=270569 08:11:16 GetSingleValue result=40 Value=cccccccc 08:11:16 SkyScan query 08:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:17 Parameters OK 08:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:17 Set A/D data flow result=40 08:11:17 Set A/D channel type result=40 08:11:17 Set A/D encoding result=40 08:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:17 Set channel filter=0.000000e+000 result=40 08:11:17 Config A/D Result=40 08:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:17 Get A/D filter: -9.255963e+061 result=40 08:11:17 Get A/D value=-858993460 result=40 08:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:17 Parameters OK 08:11:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:17 Set A/D data flow result=40 08:11:17 Set A/D channel type result=40 08:11:17 Set A/D encoding result=40 08:11:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:17 Set channel filter=0.000000e+000 result=40 08:11:17 Config A/D Result=40 08:11:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:17 Get A/D filter: -9.255963e+061 result=40 08:11:17 Get A/D value=-858993460 result=40 08:11:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:17 Aux= 08:11:17 Message to Camera, serial 270569 queued 08:11:54 Received message from Master: op=PointingHead serial=270582 08:11:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:11:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:11:54 Point started: ret=0 08:11:54 point_skyscan result=0 08:11:55 Check angles 08:11:55 SkyScan query 08:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:11:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:11:55 Message to Master queued w/err=0: serial=270582 error=0 08:12:00 Received message from Master: op=Filter serial=270583 08:12:00 Color wheel filter change from 0 to 0 08:12:00 FLIGetFilterPos err=0 currentPosition=0 08:12:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:00 Filter is already there-color wheel unchanged 08:12:01 Received message from Master: op=Shutter serial=270584 08:12:01 Shutter LASER close 08:12:01 Received message from Camera: op=State serial=270586 08:12:01 GetSingleValue result=40 Value=cccccccc 08:12:01 SkyScan query 08:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:12:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:01 Parameters OK 08:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:01 Set A/D data flow result=40 08:12:01 Set A/D channel type result=40 08:12:01 Set A/D encoding result=40 08:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:01 Set channel filter=0.000000e+000 result=40 08:12:01 Config A/D Result=40 08:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:01 Get A/D filter: -9.255963e+061 result=40 08:12:01 Get A/D value=-858993460 result=40 08:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:01 Parameters OK 08:12:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:01 Set A/D data flow result=40 08:12:01 Set A/D channel type result=40 08:12:01 Set A/D encoding result=40 08:12:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:01 Set channel filter=0.000000e+000 result=40 08:12:01 Config A/D Result=40 08:12:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:01 Get A/D filter: -9.255963e+061 result=40 08:12:01 Get A/D value=-858993460 result=40 08:12:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:01 Aux= 08:12:01 Message to Camera, serial 270586 queued 08:12:38 Received message from Master: op=PointingHead serial=270599 08:12:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:12:38 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:12:38 Point started: ret=0 08:12:38 point_skyscan result=0 08:12:39 Check angles 08:12:39 SkyScan query 08:12:40 SkyScan query done: ret=0 az=136.5<-9100 ze=-6.51<-12434 Statuses=0009 0008 08:12:40 Msec=0 True Az=136.5 Ze=-6.51 Az status=0009 Ze status=0008 08:12:40 Check angles 08:12:40 SkyScan query 08:12:40 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 08:12:40 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 08:12:41 Check angles 08:12:41 SkyScan query 08:12:41 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 08:12:41 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 08:12:41 Check angles 08:12:41 SkyScan query 08:12:42 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:12:42 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:12:42 Message to Master queued w/err=0: serial=270599 error=0 08:12:47 Received message from Master: op=Filter serial=270600 08:12:47 Color wheel filter change from 0 to 0 08:12:47 FLIGetFilterPos err=0 currentPosition=0 08:12:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:47 Filter is already there-color wheel unchanged 08:12:47 Received message from Master: op=Shutter serial=270601 08:12:47 Shutter LASER close 08:12:47 Received message from Camera: op=State serial=270603 08:12:47 GetSingleValue result=40 Value=cccccccc 08:12:47 SkyScan query 08:12:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:12:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:48 Parameters OK 08:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:48 Set A/D data flow result=40 08:12:48 Set A/D channel type result=40 08:12:48 Set A/D encoding result=40 08:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:48 Set channel filter=0.000000e+000 result=40 08:12:48 Config A/D Result=40 08:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:48 Get A/D filter: -9.255963e+061 result=40 08:12:48 Get A/D value=-858993460 result=40 08:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:48 Parameters OK 08:12:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:48 Set A/D data flow result=40 08:12:48 Set A/D channel type result=40 08:12:48 Set A/D encoding result=40 08:12:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:48 Set channel filter=0.000000e+000 result=40 08:12:48 Config A/D Result=40 08:12:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:48 Get A/D filter: -9.255963e+061 result=40 08:12:48 Get A/D value=-858993460 result=40 08:12:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:48 Aux= 08:12:48 Message to Camera, serial 270603 queued 08:13:25 Received message from Master: op=PointingHead serial=270616 08:13:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:13:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:13:25 Point started: ret=0 08:13:25 point_skyscan result=0 08:13:26 Check angles 08:13:26 SkyScan query 08:13:26 SkyScan query done: ret=0 az=153.255<-10217 ze=6.51<-11566 Statuses=0009 0008 08:13:26 Msec=0 True Az=153.255 Ze=6.51 Az status=0009 Ze status=0008 08:13:26 Check angles 08:13:26 SkyScan query 08:13:27 SkyScan query done: ret=0 az=135.45<-9030 ze=6.495<-11567 Statuses=0009 0008 08:13:27 Msec=750 True Az=135.45 Ze=6.495 Az status=0009 Ze status=0008 08:13:27 Check angles 08:13:27 SkyScan query 08:13:28 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 08:13:28 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 08:13:28 Check angles 08:13:28 SkyScan query 08:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:13:29 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:13:29 Message to Master queued w/err=0: serial=270616 error=0 08:13:34 Received message from Master: op=Filter serial=270617 08:13:34 Color wheel filter change from 0 to 0 08:13:34 FLIGetFilterPos err=0 currentPosition=0 08:13:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:34 Filter is already there-color wheel unchanged 08:13:34 Received message from Master: op=Shutter serial=270618 08:13:34 Shutter LASER close 08:13:34 Received message from Camera: op=State serial=270620 08:13:34 GetSingleValue result=40 Value=cccccccc 08:13:34 SkyScan query 08:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:13:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:34 Parameters OK 08:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:34 Set A/D data flow result=40 08:13:34 Set A/D channel type result=40 08:13:34 Set A/D encoding result=40 08:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:34 Set channel filter=0.000000e+000 result=40 08:13:34 Config A/D Result=40 08:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:34 Get A/D filter: -9.255963e+061 result=40 08:13:34 Get A/D value=-858993460 result=40 08:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:34 Parameters OK 08:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:34 Set A/D data flow result=40 08:13:34 Set A/D channel type result=40 08:13:34 Set A/D encoding result=40 08:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:34 Set channel filter=0.000000e+000 result=40 08:13:34 Config A/D Result=40 08:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2019-3-14 08:13:34] 08:13:34 Get A/D filter: -9.255963e+061 result=40 08:13:34 Get A/D value=-858993460 result=40 08:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:34 Aux= 08:13:34 Message to Camera, serial 270620 queued 08:14:11 Received message from Master: op=PointingHead serial=270633 08:14:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:14:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:14:12 Point started: ret=0 08:14:12 point_skyscan result=0 08:14:12 Check angles 08:14:12 SkyScan query 08:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 08:14:13 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 08:14:13 Check angles 08:14:13 SkyScan query 08:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 08:14:14 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 08:14:14 Check angles 08:14:14 SkyScan query 08:14:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 08:14:14 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 08:14:15 Check angles 08:14:15 SkyScan query 08:14:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 08:14:15 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 08:14:15 Check angles 08:14:15 SkyScan query 08:14:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 08:14:16 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 08:14:16 Check angles 08:14:16 SkyScan query 08:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 08:14:17 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 08:14:17 Check angles 08:14:17 SkyScan query 08:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 08:14:17 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 08:14:18 Check angles 08:14:18 SkyScan query 08:14:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 08:14:18 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 08:14:18 Check angles 08:14:18 SkyScan query 08:14:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:14:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:14:19 Message to Master queued w/err=0: serial=270633 error=0 08:14:24 Received message from Master: op=Filter serial=270634 08:14:24 Color wheel filter change from 0 to 0 08:14:24 FLIGetFilterPos err=0 currentPosition=0 08:14:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:24 Filter is already there-color wheel unchanged 08:14:24 Received message from Master: op=Shutter serial=270635 08:14:24 Shutter LASER open 08:14:24 Received message from Camera: op=State serial=270637 08:14:24 GetSingleValue result=40 Value=cccccccc 08:14:24 SkyScan query 08:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:14:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:25 Parameters OK 08:14:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:25 Set A/D data flow result=40 08:14:25 Set A/D channel type result=40 08:14:25 Set A/D encoding result=40 08:14:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:25 Set channel filter=0.000000e+000 result=40 08:14:25 Config A/D Result=40 08:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:25 Get A/D filter: -9.255963e+061 result=40 08:14:25 Get A/D value=-858993460 result=40 08:14:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:25 Parameters OK 08:14:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:25 Set A/D data flow result=40 08:14:25 Set A/D channel type result=40 08:14:25 Set A/D encoding result=40 08:14:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:25 Set channel filter=0.000000e+000 result=40 08:14:25 Config A/D Result=40 08:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:25 Get A/D filter: -9.255963e+061 result=40 08:14:25 Get A/D value=-858993460 result=40 08:14:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:25 Aux= 08:14:25 Message to Camera, serial 270637 queued 08:14:33 Received message from Master: op=Shutter serial=270647 08:14:33 Shutter LASER close 08:14:34 Received message from Master: op=PointingHead serial=270651 08:14:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:14:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:14:34 Point started: ret=0 08:14:34 point_skyscan result=0 08:14:35 Check angles 08:14:35 SkyScan query 08:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 08:14:35 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 08:14:36 Check angles 08:14:36 SkyScan query 08:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.32<-20088 Statuses=0008 0009 08:14:36 Msec=750 True Az=112.995 Ze=-121.32 Az status=0008 Ze status=0009 08:14:36 Check angles 08:14:36 SkyScan query 08:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 08:14:37 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 08:14:37 Check angles 08:14:37 SkyScan query 08:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 08:14:38 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 08:14:38 Check angles 08:14:38 SkyScan query 08:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.005<-15867 Statuses=0008 0009 08:14:38 Msec=3000 True Az=112.995 Ze=-58.005 Az status=0008 Ze status=0009 08:14:39 Check angles 08:14:39 SkyScan query 08:14:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-36.66<-14444 Statuses=0008 0009 08:14:39 Msec=3750 True Az=112.995 Ze=-36.66 Az status=0008 Ze status=0009 08:14:39 Check angles 08:14:39 SkyScan query 08:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.675<-13045 Statuses=0008 0009 08:14:40 Msec=4500 True Az=112.995 Ze=-15.675 Az status=0008 Ze status=0009 08:14:40 Check angles 08:14:40 SkyScan query 08:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.98<-11668 Statuses=0008 0009 08:14:41 Msec=5250 True Az=112.995 Ze=4.98 Az status=0008 Ze status=0009 08:14:41 Check angles 08:14:41 SkyScan query 08:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:14:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:14:41 Message to Master queued w/err=0: serial=270651 error=0 08:14:46 Received message from Master: op=Filter serial=270652 08:14:46 Color wheel filter change from 0 to 0 08:14:46 FLIGetFilterPos err=0 currentPosition=0 08:14:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:46 Filter is already there-color wheel unchanged 08:14:47 Received message from Master: op=Shutter serial=270653 08:14:47 Shutter LASER close 08:14:47 Received message from Camera: op=State serial=270655 08:14:47 GetSingleValue result=40 Value=cccccccc 08:14:47 SkyScan query 08:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:14:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:47 Parameters OK 08:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:47 Set A/D data flow result=40 08:14:47 Set A/D channel type result=40 08:14:47 Set A/D encoding result=40 08:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:47 Set channel filter=0.000000e+000 result=40 08:14:47 Config A/D Result=40 08:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:47 Get A/D filter: -9.255963e+061 result=40 08:14:47 Get A/D value=-858993460 result=40 08:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:47 Parameters OK 08:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:47 Set A/D data flow result=40 08:14:47 Set A/D channel type result=40 08:14:47 Set A/D encoding result=40 08:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:47 Set channel filter=0.000000e+000 result=40 08:14:47 Config A/D Result=40 08:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:47 Get A/D filter: -9.255963e+061 result=40 08:14:47 Get A/D value=-858993460 result=40 08:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:47 Aux= 08:14:47 Message to Camera, serial 270655 queued 08:15:24 Received message from Master: op=PointingHead serial=270668 08:15:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:15:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:15:25 Point started: ret=0 08:15:25 point_skyscan result=0 08:15:25 Check angles 08:15:25 SkyScan query 08:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:15:26 Message to Master queued w/err=0: serial=270668 error=0 08:15:31 Received message from Master: op=Filter serial=270669 08:15:31 Color wheel filter change from 0 to 0 08:15:31 FLIGetFilterPos err=0 currentPosition=0 08:15:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:31 Filter is already there-color wheel unchanged 08:15:31 Received message from Master: op=Shutter serial=270670 08:15:31 Shutter LASER close 08:15:31 Received message from Camera: op=State serial=270672 08:15:31 GetSingleValue result=40 Value=cccccccc 08:15:31 SkyScan query 08:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:15:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:32 Parameters OK 08:15:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:32 Set A/D data flow result=40 08:15:32 Set A/D channel type result=40 08:15:32 Set A/D encoding result=40 08:15:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:32 Set channel filter=0.000000e+000 result=40 08:15:32 Config A/D Result=40 08:15:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:32 Get A/D filter: -9.255963e+061 result=40 08:15:32 Get A/D value=-858993460 result=40 08:15:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:32 Parameters OK 08:15:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:32 Set A/D data flow result=40 08:15:32 Set A/D channel type result=40 08:15:32 Set A/D encoding result=40 08:15:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:32 Set channel filter=0.000000e+000 result=40 08:15:32 Config A/D Result=40 08:15:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:32 Get A/D filter: -9.255963e+061 result=40 08:15:32 Get A/D value=-858993460 result=40 08:15:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:32 Aux= 08:15:32 Message to Camera, serial 270672 queued 08:16:09 Received message from Master: op=PointingHead serial=270685 08:16:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:09 Point started: ret=0 08:16:09 point_skyscan result=0 08:16:10 Check angles 08:16:10 SkyScan query 08:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:10 Message to Master queued w/err=0: serial=270685 error=0 08:16:15 Received message from Master: op=Filter serial=270686 08:16:15 Color wheel filter change from 0 to 0 08:16:15 FLIGetFilterPos err=0 currentPosition=0 08:16:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:15 Filter is already there-color wheel unchanged 08:16:15 Received message from Master: op=Shutter serial=270687 08:16:15 Shutter LASER close 08:16:15 Received message from Camera: op=State serial=270689 08:16:15 GetSingleValue result=40 Value=cccccccc 08:16:15 SkyScan query 08:16:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:16 Parameters OK 08:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:16 Set A/D data flow result=40 08:16:16 Set A/D channel type result=40 08:16:16 Set A/D encoding result=40 08:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:16 Set channel filter=0.000000e+000 result=40 08:16:16 Config A/D Result=40 08:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:16 Get A/D filter: -9.255963e+061 result=40 08:16:16 Get A/D value=-858993460 result=40 08:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:16 Parameters OK 08:16:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:16 Set A/D data flow result=40 08:16:16 Set A/D channel type result=40 08:16:16 Set A/D encoding result=40 08:16:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:16 Set channel filter=0.000000e+000 result=40 08:16:16 Config A/D Result=40 08:16:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:16 Get A/D filter: -9.255963e+061 result=40 08:16:16 Get A/D value=-858993460 result=40 08:16:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:16 Aux= 08:16:16 Message to Camera, serial 270689 queued 08:16:53 Received message from Master: op=PointingHead serial=270702 08:16:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:16:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:16:53 Point started: ret=0 08:16:53 point_skyscan result=0 08:16:54 Check angles 08:16:54 SkyScan query 08:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:16:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:16:54 Message to Master queued w/err=0: serial=270702 error=0 08:16:59 Received message from Master: op=Filter serial=270703 08:16:59 Color wheel filter change from 0 to 0 08:16:59 FLIGetFilterPos err=0 currentPosition=0 08:16:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:59 Filter is already there-color wheel unchanged 08:17:00 Received message from Master: op=Shutter serial=270704 08:17:00 Shutter LASER close 08:17:00 Received message from Camera: op=State serial=270706 08:17:00 GetSingleValue result=40 Value=cccccccc 08:17:00 SkyScan query 08:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:00 Parameters OK 08:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:00 Set A/D data flow result=40 08:17:00 Set A/D channel type result=40 08:17:00 Set A/D encoding result=40 08:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:00 Set channel filter=0.000000e+000 result=40 08:17:00 Config A/D Result=40 08:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:00 Get A/D filter: -9.255963e+061 result=40 08:17:00 Get A/D value=-858993460 result=40 08:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:00 Parameters OK 08:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:00 Set A/D data flow result=40 08:17:00 Set A/D channel type result=40 08:17:00 Set A/D encoding result=40 08:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:00 Set channel filter=0.000000e+000 result=40 08:17:00 Config A/D Result=40 08:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:00 Get A/D filter: -9.255963e+061 result=40 08:17:00 Get A/D value=-858993460 result=40 08:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:00 Aux= 08:17:00 Message to Camera, serial 270706 queued 08:17:37 Received message from Master: op=PointingHead serial=270719 08:17:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:17:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:17:37 Point started: ret=0 08:17:37 point_skyscan result=0 08:17:38 Check angles 08:17:38 SkyScan query 08:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 08:17:39 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 08:17:39 Check angles 08:17:39 SkyScan query 08:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 08:17:39 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 08:17:40 Check angles 08:17:40 SkyScan query 08:17:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.965<-16331 Statuses=0008 0009 08:17:40 Msec=1500 True Az=112.995 Ze=-64.965 Az status=0008 Ze status=0009 08:17:40 Check angles 08:17:40 SkyScan query 08:17:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 08:17:41 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 08:17:41 Check angles 08:17:41 SkyScan query 08:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.28<-19152 Statuses=0008 0009 08:17:42 Msec=3000 True Az=112.995 Ze=-107.28 Az status=0008 Ze status=0009 08:17:42 Check angles 08:17:42 SkyScan query 08:17:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 08:17:42 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 08:17:43 Check angles 08:17:43 SkyScan query 08:17:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.22<-21948 Statuses=0008 0009 08:17:43 Msec=4500 True Az=112.995 Ze=-149.22 Az status=0008 Ze status=0009 08:17:43 Check angles 08:17:43 SkyScan query 08:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.16<-23344 Statuses=0008 0009 08:17:44 Msec=5250 True Az=112.995 Ze=-170.16 Az status=0008 Ze status=0009 08:17:44 Check angles 08:17:44 SkyScan query 08:17:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:17:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:17:45 Message to Master queued w/err=0: serial=270719 error=0 08:17:50 Received message from Master: op=Filter serial=270720 08:17:50 Color wheel filter change from 0 to 0 08:17:50 FLIGetFilterPos err=0 currentPosition=0 08:17:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:50 Filter is already there-color wheel unchanged 08:17:50 Received message from Master: op=Shutter serial=270721 08:17:50 Shutter LASER open 08:17:50 Received message from Camera: op=State serial=270723 08:17:50 GetSingleValue result=40 Value=cccccccc 08:17:50 SkyScan query 08:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:17:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:51 Parameters OK 08:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:51 Set A/D data flow result=40 08:17:51 Set A/D channel type result=40 08:17:51 Set A/D encoding result=40 08:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:51 Set channel filter=0.000000e+000 result=40 08:17:51 Config A/D Result=40 08:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:51 Get A/D filter: -9.255963e+061 result=40 08:17:51 Get A/D value=-858993460 result=40 08:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:51 Parameters OK 08:17:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:51 Set A/D data flow result=40 08:17:51 Set A/D channel type result=40 08:17:51 Set A/D encoding result=40 08:17:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:51 Set channel filter=0.000000e+000 result=40 08:17:51 Config A/D Result=40 08:17:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:51 Get A/D filter: -9.255963e+061 result=40 08:17:51 Get A/D value=-858993460 result=40 08:17:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:51 Aux= 08:17:51 Message to Camera, serial 270723 queued 08:17:59 Received message from Master: op=Shutter serial=270733 08:17:59 Shutter LASER close 08:18:00 Received message from Master: op=PointingHead serial=270737 08:18:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:00 Point started: ret=0 08:18:00 point_skyscan result=0 08:18:01 Check angles 08:18:01 SkyScan query 08:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 08:18:01 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 08:18:02 Check angles 08:18:02 SkyScan query 08:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 08:18:02 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 08:18:02 Check angles 08:18:02 SkyScan query 08:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 08:18:03 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 08:18:03 Check angles 08:18:03 SkyScan query 08:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 08:18:04 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 08:18:04 Check angles 08:18:04 SkyScan query 08:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.28<-15952 Statuses=0008 0009 08:18:04 Msec=3000 True Az=112.995 Ze=-59.28 Az status=0008 Ze status=0009 08:18:05 Check angles 08:18:05 SkyScan query 08:18:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.265<-14551 Statuses=0008 0009 08:18:05 Msec=3750 True Az=112.995 Ze=-38.265 Az status=0008 Ze status=0009 08:18:05 Check angles 08:18:05 SkyScan query 08:18:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 08:18:06 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 08:18:06 Check angles 08:18:06 SkyScan query 08:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 08:18:07 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 08:18:07 Check angles 08:18:07 SkyScan query 08:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:18:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:18:07 Message to Master queued w/err=0: serial=270737 error=0 08:18:12 Received message from Master: op=Filter serial=270738 08:18:12 Color wheel filter change from 0 to 0 08:18:12 FLIGetFilterPos err=0 currentPosition=0 08:18:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:12 Filter is already there-color wheel unchanged 08:18:13 Received message from Master: op=Shutter serial=270739 08:18:13 Shutter LASER close 08:18:13 Received message from Camera: op=State serial=270741 08:18:13 GetSingleValue result=40 Value=cccccccc 08:18:13 SkyScan query 08:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:13 Parameters OK 08:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:13 Set A/D data flow result=40 08:18:13 Set A/D channel type result=40 08:18:13 Set A/D encoding result=40 08:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:13 Set channel filter=0.000000e+000 result=40 08:18:13 Config A/D Result=40 08:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:13 Get A/D filter: -9.255963e+061 result=40 08:18:13 Get A/D value=-858993460 result=40 08:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:13 Parameters OK 08:18:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:13 Set A/D data flow result=40 08:18:13 Set A/D channel type result=40 08:18:13 Set A/D encoding result=40 08:18:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:13 Set channel filter=0.000000e+000 result=40 08:18:13 Config A/D Result=40 08:18:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:13 Get A/D filter: -9.255963e+061 result=40 08:18:13 Get A/D value=-858993460 result=40 08:18:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:13 Aux= 08:18:13 Message to Camera, serial 270741 queued 08:18:50 Received message from Master: op=PointingHead serial=270754 08:18:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:18:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:18:51 Point started: ret=0 08:18:51 point_skyscan result=0 08:18:51 Check angles 08:18:51 SkyScan query 08:18:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:18:52 Message to Master queued w/err=0: serial=270754 error=0 08:18:57 Received message from Master: op=Filter serial=270755 08:18:57 Color wheel filter change from 0 to 0 08:18:57 FLIGetFilterPos err=0 currentPosition=0 08:18:57 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:57 Filter is already there-color wheel unchanged 08:18:57 Received message from Master: op=Shutter serial=270756 08:18:57 Shutter LASER close 08:18:57 Received message from Camera: op=State serial=270758 08:18:57 GetSingleValue result=40 Value=cccccccc 08:18:57 SkyScan query 08:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:18:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:58 Parameters OK 08:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:58 Set A/D data flow result=40 08:18:58 Set A/D channel type result=40 08:18:58 Set A/D encoding result=40 08:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:58 Set channel filter=0.000000e+000 result=40 08:18:58 Config A/D Result=40 08:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:58 Get A/D filter: -9.255963e+061 result=40 08:18:58 Get A/D value=-858993460 result=40 08:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:58 Parameters OK 08:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:58 Set A/D data flow result=40 08:18:58 Set A/D channel type result=40 08:18:58 Set A/D encoding result=40 08:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:58 Set channel filter=0.000000e+000 result=40 08:18:58 Config A/D Result=40 08:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:58 Get A/D filter: -9.255963e+061 result=40 08:18:58 Get A/D value=-858993460 result=40 08:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:58 Aux= 08:18:58 Message to Camera, serial 270758 queued 08:19:34 Received message from Master: op=PointingHead serial=270770 08:19:34 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:19:34 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:19:34 Point started: ret=0 08:19:34 point_skyscan result=0 08:19:35 Check angles 08:19:35 SkyScan query 08:19:35 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 08:19:35 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 08:19:35 Check angles 08:19:35 SkyScan query 08:19:36 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 08:19:36 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 08:19:36 Check angles 08:19:36 SkyScan query 08:19:37 SkyScan query done: ret=0 az=170.985<-11399 ze=-6.495<-12433 Statuses=0009 0008 08:19:37 Msec=1500 True Az=170.985 Ze=-6.495 Az status=0009 Ze status=0008 08:19:37 Check angles 08:19:37 SkyScan query 08:19:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:19:37 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:19:37 Message to Master queued w/err=0: serial=270770 error=0 08:19:42 Received message from Master: op=Filter serial=270771 08:19:42 Color wheel filter change from 0 to 0 08:19:42 FLIGetFilterPos err=0 currentPosition=0 08:19:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:42 Filter is already there-color wheel unchanged 08:19:43 Received message from Master: op=Shutter serial=270772 08:19:43 Shutter LASER close 08:19:43 Received message from Camera: op=State serial=270774 08:19:43 GetSingleValue result=40 Value=cccccccc 08:19:43 SkyScan query 08:19:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:19:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:43 Parameters OK 08:19:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:43 Set A/D data flow result=40 08:19:43 Set A/D channel type result=40 08:19:43 Set A/D encoding result=40 08:19:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:43 Set channel filter=0.000000e+000 result=40 08:19:43 Config A/D Result=40 08:19:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:43 Get A/D filter: -9.255963e+061 result=40 08:19:43 Get A/D value=-858993460 result=40 08:19:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:43 Parameters OK 08:19:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:43 Set A/D data flow result=40 08:19:43 Set A/D channel type result=40 08:19:43 Set A/D encoding result=40 08:19:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:43 Set channel filter=0.000000e+000 result=40 08:19:43 Config A/D Result=40 08:19:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:43 Get A/D filter: -9.255963e+061 result=40 08:19:43 Get A/D value=-858993460 result=40 08:19:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:43 Aux= 08:19:43 Message to Camera, serial 270774 queued 08:20:19 Received message from Master: op=PointingHead serial=270786 08:20:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:20:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:20:20 Point started: ret=0 08:20:20 point_skyscan result=0 08:20:20 Check angles 08:20:20 SkyScan query 08:20:21 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 08:20:21 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 08:20:21 Check angles 08:20:21 SkyScan query 08:20:22 SkyScan query done: ret=0 az=135.27<-9018 ze=6.495<-11567 Statuses=0009 0008 08:20:22 Msec=750 True Az=135.27 Ze=6.495 Az status=0009 Ze status=0008 08:20:22 Check angles 08:20:22 SkyScan query 08:20:22 SkyScan query done: ret=0 az=117.33<-7822 ze=6.495<-11567 Statuses=0009 0008 08:20:22 Msec=1500 True Az=117.33 Ze=6.495 Az status=0009 Ze status=0008 08:20:23 Check angles 08:20:23 SkyScan query 08:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:20:23 Message to Master queued w/err=0: serial=270786 error=0 08:20:28 Received message from Master: op=Filter serial=270787 08:20:28 Color wheel filter change from 0 to 0 08:20:28 FLIGetFilterPos err=0 currentPosition=0 08:20:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:28 Filter is already there-color wheel unchanged 08:20:28 Received message from Master: op=Shutter serial=270788 08:20:28 Shutter LASER close 08:20:28 Received message from Camera: op=State serial=270790 08:20:28 GetSingleValue result=40 Value=cccccccc 08:20:28 SkyScan query 08:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:20:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:29 Parameters OK 08:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:29 Set A/D data flow result=40 08:20:29 Set A/D channel type result=40 08:20:29 Set A/D encoding result=40 08:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:29 Set channel filter=0.000000e+000 result=40 08:20:29 Config A/D Result=40 08:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:29 Get A/D filter: -9.255963e+061 result=40 08:20:29 Get A/D value=-858993460 result=40 08:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:29 Parameters OK 08:20:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:29 Set A/D data flow result=40 08:20:29 Set A/D channel type result=40 08:20:29 Set A/D encoding result=40 08:20:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:29 Set channel filter=0.000000e+000 result=40 08:20:29 Config A/D Result=40 08:20:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:29 Get A/D filter: -9.255963e+061 result=40 08:20:29 Get A/D value=-858993460 result=40 08:20:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:29 Aux= 08:20:29 Message to Camera, serial 270790 queued 08:21:06 Received message from Master: op=PointingHead serial=270803 08:21:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:21:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:21:06 Point started: ret=0 08:21:06 point_skyscan result=0 08:21:07 Check angles 08:21:07 SkyScan query 08:21:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.73<-13582 Statuses=0008 0009 08:21:07 Msec=0 True Az=112.995 Ze=-23.73 Az status=0008 Ze status=0009 08:21:08 Check angles 08:21:08 SkyScan query 08:21:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.595<-14973 Statuses=0008 0009 08:21:08 Msec=750 True Az=112.995 Ze=-44.595 Az status=0008 Ze status=0009 08:21:08 Check angles 08:21:08 SkyScan query 08:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 08:21:09 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 08:21:09 Check angles 08:21:09 SkyScan query 08:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.49<-17766 Statuses=0008 0009 08:21:10 Msec=2250 True Az=112.995 Ze=-86.49 Az status=0008 Ze status=0009 08:21:10 Check angles 08:21:10 SkyScan query 08:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.46<-19164 Statuses=0008 0009 08:21:10 Msec=3000 True Az=112.995 Ze=-107.46 Az status=0008 Ze status=0009 08:21:11 Check angles 08:21:11 SkyScan query 08:21:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 08:21:11 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 08:21:11 Check angles 08:21:11 SkyScan query 08:21:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 08:21:12 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 08:21:12 Check angles 08:21:12 SkyScan query 08:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 08:21:13 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 08:21:13 Check angles 08:21:13 SkyScan query 08:21:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:21:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:21:13 Message to Master queued w/err=0: serial=270803 error=0 08:21:18 Received message from Master: op=Filter serial=270804 08:21:18 Color wheel filter change from 0 to 0 08:21:18 FLIGetFilterPos err=0 currentPosition=0 08:21:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:18 Filter is already there-color wheel unchanged 08:21:19 Received message from Master: op=Shutter serial=270805 08:21:19 Shutter LASER open 08:21:19 Received message from Camera: op=State serial=270807 08:21:19 GetSingleValue result=40 Value=cccccccc 08:21:19 SkyScan query 08:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:21:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:19 Parameters OK 08:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:19 Set A/D data flow result=40 08:21:19 Set A/D channel type result=40 08:21:19 Set A/D encoding result=40 08:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:19 Set channel filter=0.000000e+000 result=40 08:21:19 Config A/D Result=40 08:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:19 Get A/D filter: -9.255963e+061 result=40 08:21:19 Get A/D value=-858993460 result=40 08:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:19 Parameters OK 08:21:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:19 Set A/D data flow result=40 08:21:19 Set A/D channel type result=40 08:21:19 Set A/D encoding result=40 08:21:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:19 Set channel filter=0.000000e+000 result=40 08:21:19 Config A/D Result=40 08:21:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:19 Get A/D filter: -9.255963e+061 result=40 08:21:19 Get A/D value=-858993460 result=40 08:21:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:19 Aux= 08:21:19 Message to Camera, serial 270807 queued 08:21:28 Received message from Master: op=Shutter serial=270817 08:21:28 Shutter LASER close 08:21:28 Received message from Master: op=PointingHead serial=270821 08:21:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:21:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:21:29 Point started: ret=0 08:21:29 point_skyscan result=0 08:21:29 Check angles 08:21:29 SkyScan query 08:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.815<-21521 Statuses=0008 0009 08:21:30 Msec=0 True Az=112.995 Ze=-142.815 Az status=0008 Ze status=0009 08:21:30 Check angles 08:21:30 SkyScan query 08:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.41<-20094 Statuses=0008 0009 08:21:31 Msec=750 True Az=112.995 Ze=-121.41 Az status=0008 Ze status=0009 08:21:31 Check angles 08:21:31 SkyScan query 08:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.44<-18696 Statuses=0008 0009 08:21:31 Msec=1500 True Az=112.995 Ze=-100.44 Az status=0008 Ze status=0009 08:21:32 Check angles 08:21:32 SkyScan query 08:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 08:21:32 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 08:21:32 Check angles 08:21:32 SkyScan query 08:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.515<-15901 Statuses=0008 0009 08:21:33 Msec=3000 True Az=112.995 Ze=-58.515 Az status=0008 Ze status=0009 08:21:33 Check angles 08:21:33 SkyScan query 08:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 08:21:34 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 08:21:34 Check angles 08:21:34 SkyScan query 08:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 08:21:34 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 08:21:35 Check angles 08:21:35 SkyScan query 08:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 08:21:35 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 08:21:35 Check angles 08:21:35 SkyScan query 08:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:21:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:21:36 Message to Master queued w/err=0: serial=270821 error=0 08:21:41 Received message from Master: op=Filter serial=270822 08:21:41 Color wheel filter change from 0 to 0 08:21:41 FLIGetFilterPos err=0 currentPosition=0 08:21:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:41 Filter is already there-color wheel unchanged 08:21:41 Received message from Master: op=Shutter serial=270823 08:21:41 Shutter LASER close 08:21:41 Received message from Camera: op=State serial=270825 08:21:41 GetSingleValue result=40 Value=cccccccc 08:21:41 SkyScan query 08:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:21:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:42 Parameters OK 08:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:42 Set A/D data flow result=40 08:21:42 Set A/D channel type result=40 08:21:42 Set A/D encoding result=40 08:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:42 Set channel filter=0.000000e+000 result=40 08:21:42 Config A/D Result=40 08:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:42 Get A/D filter: -9.255963e+061 result=40 08:21:42 Get A/D value=-858993460 result=40 08:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:42 Parameters OK 08:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:42 Set A/D data flow result=40 08:21:42 Set A/D channel type result=40 08:21:42 Set A/D encoding result=40 08:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:42 Set channel filter=0.000000e+000 result=40 08:21:42 Config A/D Result=40 08:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:42 Get A/D filter: -9.255963e+061 result=40 08:21:42 Get A/D value=-858993460 result=40 08:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:42 Aux= 08:21:42 Message to Camera, serial 270825 queued 08:22:19 Received message from Master: op=PointingHead serial=270838 08:22:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:22:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:22:19 Point started: ret=0 08:22:19 point_skyscan result=0 08:22:20 Check angles 08:22:20 SkyScan query 08:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:22:20 Message to Master queued w/err=0: serial=270838 error=0 08:22:25 Received message from Master: op=Filter serial=270839 08:22:25 Color wheel filter change from 0 to 0 08:22:25 FLIGetFilterPos err=0 currentPosition=0 08:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:25 Filter is already there-color wheel unchanged 08:22:26 Received message from Master: op=Shutter serial=270840 08:22:26 Shutter LASER close 08:22:26 Received message from Camera: op=State serial=270842 08:22:26 GetSingleValue result=40 Value=cccccccc 08:22:26 SkyScan query 08:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:26 Parameters OK 08:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:26 Set A/D data flow result=40 08:22:26 Set A/D channel type result=40 08:22:26 Set A/D encoding result=40 08:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:26 Set channel filter=0.000000e+000 result=40 08:22:26 Config A/D Result=40 08:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:26 Get A/D filter: -9.255963e+061 result=40 08:22:26 Get A/D value=-858993460 result=40 08:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:26 Parameters OK 08:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:26 Set A/D data flow result=40 08:22:26 Set A/D channel type result=40 08:22:26 Set A/D encoding result=40 08:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:26 Set channel filter=0.000000e+000 result=40 08:22:26 Config A/D Result=40 08:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:26 Get A/D filter: -9.255963e+061 result=40 08:22:26 Get A/D value=-858993460 result=40 08:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:26 Aux= 08:22:26 Message to Camera, serial 270842 queued 08:23:03 Received message from Master: op=PointingHead serial=270855 08:23:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:03 Point started: ret=0 08:23:03 point_skyscan result=0 08:23:04 Check angles 08:23:04 SkyScan query 08:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:05 Message to Master queued w/err=0: serial=270855 error=0 08:23:10 Received message from Master: op=Filter serial=270856 08:23:10 Color wheel filter change from 0 to 0 08:23:10 FLIGetFilterPos err=0 currentPosition=0 08:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:10 Filter is already there-color wheel unchanged 08:23:10 Received message from Master: op=Shutter serial=270857 08:23:10 Shutter LASER close 08:23:10 Received message from Camera: op=State serial=270859 08:23:10 GetSingleValue result=40 Value=cccccccc 08:23:10 SkyScan query 08:23:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:10 Parameters OK 08:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:10 Set A/D data flow result=40 08:23:10 Set A/D channel type result=40 08:23:10 Set A/D encoding result=40 08:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:10 Set channel filter=0.000000e+000 result=40 08:23:10 Config A/D Result=40 08:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:10 Get A/D filter: -9.255963e+061 result=40 08:23:10 Get A/D value=-858993460 result=40 08:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:10 Parameters OK 08:23:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:10 Set A/D data flow result=40 08:23:10 Set A/D channel type result=40 08:23:10 Set A/D encoding result=40 08:23:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:10 Set channel filter=0.000000e+000 result=40 08:23:10 Config A/D Result=40 08:23:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:10 Get A/D filter: -9.255963e+061 result=40 08:23:10 Get A/D value=-858993460 result=40 08:23:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:10 Aux= 08:23:10 Message to Camera, serial 270859 queued 08:23:47 Received message from Master: op=PointingHead serial=270872 08:23:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:23:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:23:48 Point started: ret=0 08:23:48 point_skyscan result=0 [UTC 2019-3-14 08:23:48] 08:23:48 Check angles 08:23:48 SkyScan query 08:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:23:49 Message to Master queued w/err=0: serial=270872 error=0 08:23:54 Received message from Master: op=Filter serial=270873 08:23:54 Color wheel filter change from 0 to 0 08:23:54 FLIGetFilterPos err=0 currentPosition=0 08:23:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:54 Filter is already there-color wheel unchanged 08:23:54 Received message from Master: op=Shutter serial=270874 08:23:54 Shutter LASER close 08:23:54 Received message from Camera: op=State serial=270876 08:23:54 GetSingleValue result=40 Value=cccccccc 08:23:54 SkyScan query 08:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:23:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:55 Parameters OK 08:23:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:55 Set A/D data flow result=40 08:23:55 Set A/D channel type result=40 08:23:55 Set A/D encoding result=40 08:23:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:55 Set channel filter=0.000000e+000 result=40 08:23:55 Config A/D Result=40 08:23:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:55 Get A/D filter: -9.255963e+061 result=40 08:23:55 Get A/D value=-858993460 result=40 08:23:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:55 Parameters OK 08:23:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:55 Set A/D data flow result=40 08:23:55 Set A/D channel type result=40 08:23:55 Set A/D encoding result=40 08:23:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:55 Set channel filter=0.000000e+000 result=40 08:23:55 Config A/D Result=40 08:23:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:55 Get A/D filter: -9.255963e+061 result=40 08:23:55 Get A/D value=-858993460 result=40 08:23:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:55 Aux= 08:23:55 Message to Camera, serial 270876 queued 08:24:31 Received message from Master: op=PointingHead serial=270888 08:24:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:24:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:24:31 Point started: ret=0 08:24:31 point_skyscan result=0 08:24:32 Check angles 08:24:32 SkyScan query 08:24:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 08:24:32 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 08:24:32 Check angles 08:24:32 SkyScan query 08:24:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.135<-15009 Statuses=0008 0009 08:24:33 Msec=750 True Az=112.995 Ze=-45.135 Az status=0008 Ze status=0009 08:24:33 Check angles 08:24:33 SkyScan query 08:24:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 08:24:34 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 08:24:34 Check angles 08:24:34 SkyScan query 08:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 08:24:35 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 08:24:35 Check angles 08:24:35 SkyScan query 08:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 08:24:35 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 08:24:36 Check angles 08:24:36 SkyScan query 08:24:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 08:24:36 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 08:24:36 Check angles 08:24:36 SkyScan query 08:24:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.375<-22025 Statuses=0008 0009 08:24:37 Msec=4500 True Az=112.995 Ze=-150.375 Az status=0008 Ze status=0009 08:24:37 Check angles 08:24:37 SkyScan query 08:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 08:24:38 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 08:24:38 Check angles 08:24:38 SkyScan query 08:24:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:24:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:24:38 Message to Master queued w/err=0: serial=270888 error=0 08:24:43 Received message from Master: op=Filter serial=270889 08:24:43 Color wheel filter change from 0 to 0 08:24:43 FLIGetFilterPos err=0 currentPosition=0 08:24:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:43 Filter is already there-color wheel unchanged 08:24:44 Received message from Master: op=Shutter serial=270890 08:24:44 Shutter LASER open 08:24:44 Received message from Camera: op=State serial=270892 08:24:44 GetSingleValue result=40 Value=cccccccc 08:24:44 SkyScan query 08:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:24:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:44 Parameters OK 08:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:44 Set A/D data flow result=40 08:24:44 Set A/D channel type result=40 08:24:44 Set A/D encoding result=40 08:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:44 Set channel filter=0.000000e+000 result=40 08:24:44 Config A/D Result=40 08:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:44 Get A/D filter: -9.255963e+061 result=40 08:24:44 Get A/D value=-858993460 result=40 08:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:44 Parameters OK 08:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:44 Set A/D data flow result=40 08:24:44 Set A/D channel type result=40 08:24:44 Set A/D encoding result=40 08:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:44 Set channel filter=0.000000e+000 result=40 08:24:44 Config A/D Result=40 08:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:44 Get A/D filter: -9.255963e+061 result=40 08:24:44 Get A/D value=-858993460 result=40 08:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:44 Aux= 08:24:44 Message to Camera, serial 270892 queued 08:24:53 Received message from Master: op=Shutter serial=270902 08:24:53 Shutter LASER close 08:24:53 Received message from Master: op=PointingHead serial=270906 08:24:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:24:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:24:54 Point started: ret=0 08:24:54 point_skyscan result=0 08:24:54 Check angles 08:24:54 SkyScan query 08:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.68<-21512 Statuses=0008 0009 08:24:55 Msec=0 True Az=112.995 Ze=-142.68 Az status=0008 Ze status=0009 08:24:55 Check angles 08:24:55 SkyScan query 08:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.275<-20085 Statuses=0008 0009 08:24:56 Msec=750 True Az=112.995 Ze=-121.275 Az status=0008 Ze status=0009 08:24:56 Check angles 08:24:56 SkyScan query 08:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.29<-18686 Statuses=0008 0009 08:24:56 Msec=1500 True Az=112.995 Ze=-100.29 Az status=0008 Ze status=0009 08:24:57 Check angles 08:24:57 SkyScan query 08:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.335<-17289 Statuses=0008 0009 08:24:57 Msec=2250 True Az=112.995 Ze=-79.335 Az status=0008 Ze status=0009 08:24:57 Check angles 08:24:57 SkyScan query 08:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.96<-15864 Statuses=0008 0009 08:24:58 Msec=3000 True Az=112.995 Ze=-57.96 Az status=0008 Ze status=0009 08:24:58 Check angles 08:24:58 SkyScan query 08:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.05<-14470 Statuses=0008 0009 08:24:59 Msec=3750 True Az=112.995 Ze=-37.05 Az status=0008 Ze status=0009 08:24:59 Check angles 08:24:59 SkyScan query 08:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.065<-13071 Statuses=0008 0009 08:24:59 Msec=4500 True Az=112.995 Ze=-16.065 Az status=0008 Ze status=0009 08:25:00 Check angles 08:25:00 SkyScan query 08:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=5.025<-11665 Statuses=0008 0009 08:25:00 Msec=5250 True Az=112.995 Ze=5.025 Az status=0008 Ze status=0009 08:25:00 Check angles 08:25:00 SkyScan query 08:25:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:25:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:25:01 Message to Master queued w/err=0: serial=270906 error=0 08:25:06 Received message from Master: op=Filter serial=270907 08:25:06 Color wheel filter change from 0 to 0 08:25:06 FLIGetFilterPos err=0 currentPosition=0 08:25:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:06 Filter is already there-color wheel unchanged 08:25:06 Received message from Master: op=Shutter serial=270908 08:25:06 Shutter LASER close 08:25:06 Received message from Camera: op=State serial=270910 08:25:06 GetSingleValue result=40 Value=cccccccc 08:25:06 SkyScan query 08:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:07 Parameters OK 08:25:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:07 Set A/D data flow result=40 08:25:07 Set A/D channel type result=40 08:25:07 Set A/D encoding result=40 08:25:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:07 Set channel filter=0.000000e+000 result=40 08:25:07 Config A/D Result=40 08:25:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:07 Get A/D filter: -9.255963e+061 result=40 08:25:07 Get A/D value=-858993460 result=40 08:25:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:07 Parameters OK 08:25:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:07 Set A/D data flow result=40 08:25:07 Set A/D channel type result=40 08:25:07 Set A/D encoding result=40 08:25:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:07 Set channel filter=0.000000e+000 result=40 08:25:07 Config A/D Result=40 08:25:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:07 Get A/D filter: -9.255963e+061 result=40 08:25:07 Get A/D value=-858993460 result=40 08:25:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:07 Aux= 08:25:07 Message to Camera, serial 270910 queued 08:25:44 Received message from Master: op=PointingHead serial=270923 08:25:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:25:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:25:44 Point started: ret=0 08:25:44 point_skyscan result=0 08:25:45 Check angles 08:25:45 SkyScan query 08:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:25:45 Message to Master queued w/err=0: serial=270923 error=0 08:25:50 Received message from Master: op=Filter serial=270924 08:25:50 Color wheel filter change from 0 to 0 08:25:50 FLIGetFilterPos err=0 currentPosition=0 08:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:50 Filter is already there-color wheel unchanged 08:25:51 Received message from Master: op=Shutter serial=270925 08:25:51 Shutter LASER close 08:25:51 Received message from Camera: op=State serial=270927 08:25:51 GetSingleValue result=40 Value=cccccccc 08:25:51 SkyScan query 08:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:51 Parameters OK 08:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:51 Set A/D data flow result=40 08:25:51 Set A/D channel type result=40 08:25:51 Set A/D encoding result=40 08:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:51 Set channel filter=0.000000e+000 result=40 08:25:51 Config A/D Result=40 08:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:51 Get A/D filter: -9.255963e+061 result=40 08:25:51 Get A/D value=-858993460 result=40 08:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:51 Parameters OK 08:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:51 Set A/D data flow result=40 08:25:51 Set A/D channel type result=40 08:25:51 Set A/D encoding result=40 08:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:51 Set channel filter=0.000000e+000 result=40 08:25:51 Config A/D Result=40 08:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:51 Get A/D filter: -9.255963e+061 result=40 08:25:51 Get A/D value=-858993460 result=40 08:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:51 Aux= 08:25:51 Message to Camera, serial 270927 queued 08:26:28 Received message from Master: op=PointingHead serial=270940 08:26:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:26:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:26:28 Point started: ret=0 08:26:28 point_skyscan result=0 08:26:29 Check angles 08:26:29 SkyScan query 08:26:30 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 08:26:30 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 08:26:30 Check angles 08:26:30 SkyScan query 08:26:30 SkyScan query done: ret=0 az=153.675<-10245 ze=-6.495<-12433 Statuses=0009 0008 08:26:30 Msec=750 True Az=153.675 Ze=-6.495 Az status=0009 Ze status=0008 08:26:31 Check angles 08:26:31 SkyScan query 08:26:31 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 08:26:31 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 08:26:31 Check angles 08:26:31 SkyScan query 08:26:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:26:32 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:26:32 Message to Master queued w/err=0: serial=270940 error=0 08:26:37 Received message from Master: op=Filter serial=270941 08:26:37 Color wheel filter change from 0 to 0 08:26:37 FLIGetFilterPos err=0 currentPosition=0 08:26:37 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:37 Filter is already there-color wheel unchanged 08:26:37 Received message from Master: op=Shutter serial=270942 08:26:37 Shutter LASER close 08:26:37 Received message from Camera: op=State serial=270944 08:26:37 GetSingleValue result=40 Value=cccccccc 08:26:37 SkyScan query 08:26:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:26:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:38 Parameters OK 08:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:38 Set A/D data flow result=40 08:26:38 Set A/D channel type result=40 08:26:38 Set A/D encoding result=40 08:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:38 Set channel filter=0.000000e+000 result=40 08:26:38 Config A/D Result=40 08:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:38 Get A/D filter: -9.255963e+061 result=40 08:26:38 Get A/D value=-858993460 result=40 08:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:38 Parameters OK 08:26:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:38 Set A/D data flow result=40 08:26:38 Set A/D channel type result=40 08:26:38 Set A/D encoding result=40 08:26:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:38 Set channel filter=0.000000e+000 result=40 08:26:38 Config A/D Result=40 08:26:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:38 Get A/D filter: -9.255963e+061 result=40 08:26:38 Get A/D value=-858993460 result=40 08:26:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:38 Aux= 08:26:38 Message to Camera, serial 270944 queued 08:27:15 Received message from Master: op=PointingHead serial=270957 08:27:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:27:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:27:15 Point started: ret=0 08:27:15 point_skyscan result=0 08:27:16 Check angles 08:27:16 SkyScan query 08:27:16 SkyScan query done: ret=0 az=153.225<-10215 ze=6.51<-11566 Statuses=0009 0008 08:27:16 Msec=0 True Az=153.225 Ze=6.51 Az status=0009 Ze status=0008 08:27:16 Check angles 08:27:16 SkyScan query 08:27:17 SkyScan query done: ret=0 az=135.765<-9051 ze=6.495<-11567 Statuses=0009 0008 08:27:17 Msec=750 True Az=135.765 Ze=6.495 Az status=0009 Ze status=0008 08:27:17 Check angles 08:27:17 SkyScan query 08:27:18 SkyScan query done: ret=0 az=118.17<-7878 ze=6.495<-11567 Statuses=0009 0008 08:27:18 Msec=1500 True Az=118.17 Ze=6.495 Az status=0009 Ze status=0008 08:27:18 Check angles 08:27:18 SkyScan query 08:27:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:27:18 Message to Master queued w/err=0: serial=270957 error=0 08:27:23 Received message from Master: op=Filter serial=270958 08:27:23 Color wheel filter change from 0 to 0 08:27:23 FLIGetFilterPos err=0 currentPosition=0 08:27:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:23 Filter is already there-color wheel unchanged 08:27:24 Received message from Master: op=Shutter serial=270959 08:27:24 Shutter LASER close 08:27:24 Received message from Camera: op=State serial=270961 08:27:24 GetSingleValue result=40 Value=cccccccc 08:27:24 SkyScan query 08:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:27:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:24 Parameters OK 08:27:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:24 Set A/D data flow result=40 08:27:24 Set A/D channel type result=40 08:27:24 Set A/D encoding result=40 08:27:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:24 Set channel filter=0.000000e+000 result=40 08:27:24 Config A/D Result=40 08:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:24 Get A/D filter: -9.255963e+061 result=40 08:27:24 Get A/D value=-858993460 result=40 08:27:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:24 Parameters OK 08:27:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:24 Set A/D data flow result=40 08:27:24 Set A/D channel type result=40 08:27:24 Set A/D encoding result=40 08:27:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:24 Set channel filter=0.000000e+000 result=40 08:27:24 Config A/D Result=40 08:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:24 Get A/D filter: -9.255963e+061 result=40 08:27:24 Get A/D value=-858993460 result=40 08:27:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:24 Aux= 08:27:24 Message to Camera, serial 270961 queued 08:28:01 Received message from Master: op=PointingHead serial=270974 08:28:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:28:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:28:01 Point started: ret=0 08:28:01 point_skyscan result=0 08:28:02 Check angles 08:28:02 SkyScan query 08:28:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 08:28:03 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 08:28:03 Check angles 08:28:03 SkyScan query 08:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 08:28:04 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 08:28:04 Check angles 08:28:04 SkyScan query 08:28:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.235<-16349 Statuses=0008 0009 08:28:04 Msec=1500 True Az=112.995 Ze=-65.235 Az status=0008 Ze status=0009 08:28:04 Check angles 08:28:04 SkyScan query 08:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.19<-17746 Statuses=0008 0009 08:28:05 Msec=2250 True Az=112.995 Ze=-86.19 Az status=0008 Ze status=0009 08:28:05 Check angles 08:28:05 SkyScan query 08:28:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 08:28:06 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 08:28:06 Check angles 08:28:06 SkyScan query 08:28:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.985<-20599 Statuses=0008 0009 08:28:07 Msec=3750 True Az=112.995 Ze=-128.985 Az status=0008 Ze status=0009 08:28:07 Check angles 08:28:07 SkyScan query 08:28:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.36<-22024 Statuses=0008 0009 08:28:07 Msec=4500 True Az=112.995 Ze=-150.36 Az status=0008 Ze status=0009 08:28:08 Check angles 08:28:08 SkyScan query 08:28:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 08:28:08 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 08:28:08 Check angles 08:28:08 SkyScan query 08:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:28:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:28:09 Message to Master queued w/err=0: serial=270974 error=0 08:28:14 Received message from Master: op=Filter serial=270975 08:28:14 Color wheel filter change from 0 to 0 08:28:14 FLIGetFilterPos err=0 currentPosition=0 08:28:14 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:14 Filter is already there-color wheel unchanged 08:28:14 Received message from Master: op=Shutter serial=270976 08:28:14 Shutter LASER open 08:28:14 Received message from Camera: op=State serial=270978 08:28:14 GetSingleValue result=40 Value=cccccccc 08:28:14 SkyScan query 08:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:15 Parameters OK 08:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:15 Set A/D data flow result=40 08:28:15 Set A/D channel type result=40 08:28:15 Set A/D encoding result=40 08:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:15 Set channel filter=0.000000e+000 result=40 08:28:15 Config A/D Result=40 08:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:15 Get A/D filter: -9.255963e+061 result=40 08:28:15 Get A/D value=-858993460 result=40 08:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:15 Parameters OK 08:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:15 Set A/D data flow result=40 08:28:15 Set A/D channel type result=40 08:28:15 Set A/D encoding result=40 08:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:15 Set channel filter=0.000000e+000 result=40 08:28:15 Config A/D Result=40 08:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:15 Get A/D filter: -9.255963e+061 result=40 08:28:15 Get A/D value=-858993460 result=40 08:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:15 Aux= 08:28:15 Message to Camera, serial 270978 queued 08:28:23 Received message from Master: op=Shutter serial=270988 08:28:23 Shutter LASER close 08:28:24 Received message from Master: op=PointingHead serial=270992 08:28:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:28:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:28:24 Point started: ret=0 08:28:24 point_skyscan result=0 08:28:25 Check angles 08:28:25 SkyScan query 08:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 08:28:25 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 08:28:26 Check angles 08:28:26 SkyScan query 08:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.575<-20105 Statuses=0008 0009 08:28:26 Msec=750 True Az=112.995 Ze=-121.575 Az status=0008 Ze status=0009 08:28:26 Check angles 08:28:26 SkyScan query 08:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.635<-18709 Statuses=0008 0009 08:28:27 Msec=1500 True Az=112.995 Ze=-100.635 Az status=0008 Ze status=0009 08:28:27 Check angles 08:28:27 SkyScan query 08:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 08:28:28 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 08:28:28 Check angles 08:28:28 SkyScan query 08:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.725<-15915 Statuses=0008 0009 08:28:28 Msec=3000 True Az=112.995 Ze=-58.725 Az status=0008 Ze status=0009 08:28:29 Check angles 08:28:29 SkyScan query 08:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 08:28:29 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 08:28:29 Check angles 08:28:29 SkyScan query 08:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.38<-13092 Statuses=0008 0009 08:28:30 Msec=4500 True Az=112.995 Ze=-16.38 Az status=0008 Ze status=0009 08:28:30 Check angles 08:28:30 SkyScan query 08:28:31 SkyScan query done: ret=0 az=113.01<-7534 ze=4.44<-11704 Statuses=0008 0009 08:28:31 Msec=5250 True Az=113.01 Ze=4.44 Az status=0008 Ze status=0009 08:28:31 Check angles 08:28:31 SkyScan query 08:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:28:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:28:31 Message to Master queued w/err=0: serial=270992 error=0 08:28:36 Received message from Master: op=Filter serial=270993 08:28:36 Color wheel filter change from 0 to 0 08:28:36 FLIGetFilterPos err=0 currentPosition=0 08:28:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:36 Filter is already there-color wheel unchanged 08:28:37 Received message from Master: op=Shutter serial=270994 08:28:37 Shutter LASER close 08:28:37 Received message from Camera: op=State serial=270996 08:28:37 GetSingleValue result=40 Value=cccccccc 08:28:37 SkyScan query 08:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:28:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:37 Parameters OK 08:28:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:37 Set A/D data flow result=40 08:28:37 Set A/D channel type result=40 08:28:37 Set A/D encoding result=40 08:28:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:37 Set channel filter=0.000000e+000 result=40 08:28:37 Config A/D Result=40 08:28:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:37 Get A/D filter: -9.255963e+061 result=40 08:28:37 Get A/D value=-858993460 result=40 08:28:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:37 Parameters OK 08:28:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:37 Set A/D data flow result=40 08:28:37 Set A/D channel type result=40 08:28:37 Set A/D encoding result=40 08:28:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:37 Set channel filter=0.000000e+000 result=40 08:28:37 Config A/D Result=40 08:28:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:37 Get A/D filter: -9.255963e+061 result=40 08:28:37 Get A/D value=-858993460 result=40 08:28:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:37 Aux= 08:28:37 Message to Camera, serial 270996 queued 08:29:14 Received message from Master: op=PointingHead serial=271009 08:29:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:15 Point started: ret=0 08:29:15 point_skyscan result=0 08:29:15 Check angles 08:29:15 SkyScan query 08:29:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:29:16 Message to Master queued w/err=0: serial=271009 error=0 08:29:21 Received message from Master: op=Filter serial=271010 08:29:21 Color wheel filter change from 0 to 0 08:29:21 FLIGetFilterPos err=0 currentPosition=0 08:29:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:21 Filter is already there-color wheel unchanged 08:29:21 Received message from Master: op=Shutter serial=271011 08:29:21 Shutter LASER close 08:29:21 Received message from Camera: op=State serial=271013 08:29:21 GetSingleValue result=40 Value=cccccccc 08:29:21 SkyScan query 08:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:29:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:22 Parameters OK 08:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:22 Set A/D data flow result=40 08:29:22 Set A/D channel type result=40 08:29:22 Set A/D encoding result=40 08:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:22 Set channel filter=0.000000e+000 result=40 08:29:22 Config A/D Result=40 08:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:22 Get A/D filter: -9.255963e+061 result=40 08:29:22 Get A/D value=-858993460 result=40 08:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:22 Parameters OK 08:29:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:22 Set A/D data flow result=40 08:29:22 Set A/D channel type result=40 08:29:22 Set A/D encoding result=40 08:29:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:22 Set channel filter=0.000000e+000 result=40 08:29:22 Config A/D Result=40 08:29:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:22 Get A/D filter: -9.255963e+061 result=40 08:29:22 Get A/D value=-858993460 result=40 08:29:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:22 Aux= 08:29:22 Message to Camera, serial 271013 queued 08:29:58 Received message from Master: op=PointingHead serial=271026 08:29:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:29:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:29:59 Point started: ret=0 08:29:59 point_skyscan result=0 08:30:00 Check angles 08:30:00 SkyScan query 08:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:30:00 Message to Master queued w/err=0: serial=271026 error=0 08:30:05 Received message from Master: op=Filter serial=271027 08:30:05 Color wheel filter change from 0 to 0 08:30:05 FLIGetFilterPos err=0 currentPosition=0 08:30:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:05 Filter is already there-color wheel unchanged 08:30:05 Received message from Master: op=Shutter serial=271028 08:30:05 Shutter LASER close 08:30:05 Received message from Camera: op=State serial=271030 08:30:05 GetSingleValue result=40 Value=cccccccc 08:30:05 SkyScan query 08:30:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:06 Parameters OK 08:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:06 Set A/D data flow result=40 08:30:06 Set A/D channel type result=40 08:30:06 Set A/D encoding result=40 08:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:06 Set channel filter=0.000000e+000 result=40 08:30:06 Config A/D Result=40 08:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:06 Get A/D filter: -9.255963e+061 result=40 08:30:06 Get A/D value=-858993460 result=40 08:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:06 Parameters OK 08:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:06 Set A/D data flow result=40 08:30:06 Set A/D channel type result=40 08:30:06 Set A/D encoding result=40 08:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:06 Set channel filter=0.000000e+000 result=40 08:30:06 Config A/D Result=40 08:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:06 Get A/D filter: -9.255963e+061 result=40 08:30:06 Get A/D value=-858993460 result=40 08:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:06 Aux= 08:30:06 Message to Camera, serial 271030 queued 08:30:43 Received message from Master: op=PointingHead serial=271043 08:30:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:30:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:30:43 Point started: ret=0 08:30:43 point_skyscan result=0 08:30:44 Check angles 08:30:44 SkyScan query 08:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:30:44 Message to Master queued w/err=0: serial=271043 error=0 08:30:49 Received message from Master: op=Filter serial=271044 08:30:49 Color wheel filter change from 0 to 0 08:30:49 FLIGetFilterPos err=0 currentPosition=0 08:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:49 Filter is already there-color wheel unchanged 08:30:50 Received message from Master: op=Shutter serial=271045 08:30:50 Shutter LASER close 08:30:50 Received message from Camera: op=State serial=271047 08:30:50 GetSingleValue result=40 Value=cccccccc 08:30:50 SkyScan query 08:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:50 Parameters OK 08:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:50 Set A/D data flow result=40 08:30:50 Set A/D channel type result=40 08:30:50 Set A/D encoding result=40 08:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:50 Set channel filter=0.000000e+000 result=40 08:30:50 Config A/D Result=40 08:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:50 Get A/D filter: -9.255963e+061 result=40 08:30:50 Get A/D value=-858993460 result=40 08:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:50 Parameters OK 08:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:50 Set A/D data flow result=40 08:30:50 Set A/D channel type result=40 08:30:50 Set A/D encoding result=40 08:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:50 Set channel filter=0.000000e+000 result=40 08:30:50 Config A/D Result=40 08:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:50 Get A/D filter: -9.255963e+061 result=40 08:30:50 Get A/D value=-858993460 result=40 08:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:50 Aux= 08:30:50 Message to Camera, serial 271047 queued 08:31:27 Received message from Master: op=PointingHead serial=271060 08:31:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:31:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:31:27 Point started: ret=0 08:31:27 point_skyscan result=0 08:31:28 Check angles 08:31:28 SkyScan query 08:31:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 08:31:29 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 08:31:29 Check angles 08:31:29 SkyScan query 08:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 08:31:30 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 08:31:30 Check angles 08:31:30 SkyScan query 08:31:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 08:31:30 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 08:31:30 Check angles 08:31:30 SkyScan query 08:31:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 08:31:31 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 08:31:31 Check angles 08:31:31 SkyScan query 08:31:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.355<-19157 Statuses=0008 0009 08:31:32 Msec=3000 True Az=112.995 Ze=-107.355 Az status=0008 Ze status=0009 08:31:32 Check angles 08:31:32 SkyScan query 08:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.31<-20554 Statuses=0008 0009 08:31:33 Msec=3750 True Az=112.995 Ze=-128.31 Az status=0008 Ze status=0009 08:31:33 Check angles 08:31:33 SkyScan query 08:31:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.73<-21982 Statuses=0008 0009 08:31:33 Msec=4500 True Az=112.995 Ze=-149.73 Az status=0008 Ze status=0009 08:31:34 Check angles 08:31:34 SkyScan query 08:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 08:31:34 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 08:31:34 Check angles 08:31:34 SkyScan query 08:31:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:31:35 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:31:35 Message to Master queued w/err=0: serial=271060 error=0 08:31:40 Received message from Master: op=Filter serial=271061 08:31:40 Color wheel filter change from 0 to 0 08:31:40 FLIGetFilterPos err=0 currentPosition=0 08:31:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:40 Filter is already there-color wheel unchanged 08:31:40 Received message from Master: op=Shutter serial=271062 08:31:40 Shutter LASER open 08:31:40 Received message from Camera: op=State serial=271064 08:31:40 GetSingleValue result=40 Value=cccccccc 08:31:40 SkyScan query 08:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:31:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:41 Parameters OK 08:31:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:41 Set A/D data flow result=40 08:31:41 Set A/D channel type result=40 08:31:41 Set A/D encoding result=40 08:31:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:41 Set channel filter=0.000000e+000 result=40 08:31:41 Config A/D Result=40 08:31:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:41 Get A/D filter: -9.255963e+061 result=40 08:31:41 Get A/D value=-858993460 result=40 08:31:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:41 Parameters OK 08:31:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:41 Set A/D data flow result=40 08:31:41 Set A/D channel type result=40 08:31:41 Set A/D encoding result=40 08:31:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:41 Set channel filter=0.000000e+000 result=40 08:31:41 Config A/D Result=40 08:31:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:41 Get A/D filter: -9.255963e+061 result=40 08:31:41 Get A/D value=-858993460 result=40 08:31:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:41 Aux= 08:31:41 Message to Camera, serial 271064 queued 08:31:49 Received message from Master: op=Shutter serial=271074 08:31:49 Shutter LASER close 08:31:50 Received message from Master: op=PointingHead serial=271078 08:31:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:31:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:31:50 Point started: ret=0 08:31:50 point_skyscan result=0 08:31:51 Check angles 08:31:51 SkyScan query 08:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 08:31:51 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 08:31:52 Check angles 08:31:52 SkyScan query 08:31:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 08:31:52 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 08:31:52 Check angles 08:31:52 SkyScan query 08:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.92<-18728 Statuses=0008 0009 08:31:53 Msec=1500 True Az=112.995 Ze=-100.92 Az status=0008 Ze status=0009 08:31:53 Check angles 08:31:53 SkyScan query 08:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.935<-17329 Statuses=0008 0009 08:31:54 Msec=2250 True Az=112.995 Ze=-79.935 Az status=0008 Ze status=0009 08:31:54 Check angles 08:31:54 SkyScan query 08:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.995<-15933 Statuses=0008 0009 08:31:54 Msec=3000 True Az=112.995 Ze=-58.995 Az status=0008 Ze status=0009 08:31:55 Check angles 08:31:55 SkyScan query 08:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 08:31:55 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 08:31:55 Check angles 08:31:55 SkyScan query 08:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 08:31:56 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 08:31:56 Check angles 08:31:56 SkyScan query 08:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 08:31:57 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 08:31:57 Check angles 08:31:57 SkyScan query 08:31:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:31:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:31:57 Message to Master queued w/err=0: serial=271078 error=0 08:32:02 Received message from Master: op=Filter serial=271079 08:32:02 Color wheel filter change from 0 to 0 08:32:02 FLIGetFilterPos err=0 currentPosition=0 08:32:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:02 Filter is already there-color wheel unchanged 08:32:03 Received message from Master: op=Shutter serial=271080 08:32:03 Shutter LASER close 08:32:03 Received message from Camera: op=State serial=271082 08:32:03 GetSingleValue result=40 Value=cccccccc 08:32:03 SkyScan query 08:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:03 Parameters OK 08:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:03 Set A/D data flow result=40 08:32:03 Set A/D channel type result=40 08:32:03 Set A/D encoding result=40 08:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:03 Set channel filter=0.000000e+000 result=40 08:32:03 Config A/D Result=40 08:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:03 Get A/D filter: -9.255963e+061 result=40 08:32:03 Get A/D value=-858993460 result=40 08:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:03 Parameters OK 08:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:03 Set A/D data flow result=40 08:32:03 Set A/D channel type result=40 08:32:03 Set A/D encoding result=40 08:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:03 Set channel filter=0.000000e+000 result=40 08:32:03 Config A/D Result=40 08:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:03 Get A/D filter: -9.255963e+061 result=40 08:32:03 Get A/D value=-858993460 result=40 08:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:03 Aux= 08:32:03 Message to Camera, serial 271082 queued 08:32:40 Received message from Master: op=PointingHead serial=271095 08:32:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:32:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:32:41 Point started: ret=0 08:32:41 point_skyscan result=0 08:32:41 Check angles 08:32:41 SkyScan query 08:32:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:32:42 Message to Master queued w/err=0: serial=271095 error=0 08:32:47 Received message from Master: op=Filter serial=271096 08:32:47 Color wheel filter change from 0 to 0 08:32:47 FLIGetFilterPos err=0 currentPosition=0 08:32:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:47 Filter is already there-color wheel unchanged 08:32:47 Received message from Master: op=Shutter serial=271097 08:32:47 Shutter LASER close 08:32:47 Received message from Camera: op=State serial=271099 08:32:47 GetSingleValue result=40 Value=cccccccc 08:32:47 SkyScan query 08:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:32:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:48 Parameters OK 08:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:48 Set A/D data flow result=40 08:32:48 Set A/D channel type result=40 08:32:48 Set A/D encoding result=40 08:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:48 Set channel filter=0.000000e+000 result=40 08:32:48 Config A/D Result=40 08:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:48 Get A/D filter: -9.255963e+061 result=40 08:32:48 Get A/D value=-858993460 result=40 08:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:48 Parameters OK 08:32:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:48 Set A/D data flow result=40 08:32:48 Set A/D channel type result=40 08:32:48 Set A/D encoding result=40 08:32:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:48 Set channel filter=0.000000e+000 result=40 08:32:48 Config A/D Result=40 08:32:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:48 Get A/D filter: -9.255963e+061 result=40 08:32:48 Get A/D value=-858993460 result=40 08:32:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:48 Aux= 08:32:48 Message to Camera, serial 271099 queued 08:33:25 Received message from Master: op=PointingHead serial=271112 08:33:25 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:33:25 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:33:25 Point started: ret=0 08:33:25 point_skyscan result=0 08:33:26 Check angles 08:33:26 SkyScan query 08:33:26 SkyScan query done: ret=0 az=136.44<-9096 ze=-6.51<-12434 Statuses=0009 0008 08:33:26 Msec=0 True Az=136.44 Ze=-6.51 Az status=0009 Ze status=0008 08:33:27 Check angles 08:33:27 SkyScan query 08:33:27 SkyScan query done: ret=0 az=154.245<-10283 ze=-6.495<-12433 Statuses=0009 0008 08:33:27 Msec=750 True Az=154.245 Ze=-6.495 Az status=0009 Ze status=0008 08:33:27 Check angles 08:33:27 SkyScan query 08:33:28 SkyScan query done: ret=0 az=171.75<-11450 ze=-6.495<-12433 Statuses=0009 0008 08:33:28 Msec=1500 True Az=171.75 Ze=-6.495 Az status=0009 Ze status=0008 08:33:28 Check angles 08:33:28 SkyScan query 08:33:29 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:33:29 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:33:29 Message to Master queued w/err=0: serial=271112 error=0 08:33:34 Received message from Master: op=Filter serial=271113 08:33:34 Color wheel filter change from 0 to 0 08:33:34 FLIGetFilterPos err=0 currentPosition=0 08:33:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:34 Filter is already there-color wheel unchanged 08:33:34 Received message from Master: op=Shutter serial=271114 08:33:34 Shutter LASER close 08:33:34 Received message from Camera: op=State serial=271116 08:33:34 GetSingleValue result=40 Value=cccccccc 08:33:34 SkyScan query 08:33:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:33:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:34 Parameters OK 08:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:34 Set A/D data flow result=40 08:33:34 Set A/D channel type result=40 08:33:34 Set A/D encoding result=40 08:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:34 Set channel filter=0.000000e+000 result=40 08:33:34 Config A/D Result=40 08:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:34 Get A/D filter: -9.255963e+061 result=40 08:33:34 Get A/D value=-858993460 result=40 08:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:34 Parameters OK 08:33:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:34 Set A/D data flow result=40 08:33:34 Set A/D channel type result=40 08:33:34 Set A/D encoding result=40 08:33:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:34 Set channel filter=0.000000e+000 result=40 08:33:34 Config A/D Result=40 08:33:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:34 Get A/D filter: -9.255963e+061 result=40 08:33:34 Get A/D value=-858993460 result=40 08:33:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:34 Aux= 08:33:34 Message to Camera, serial 271116 queued 08:33:35 Received message from Master: op=Identify serial=271117 08:34:11 Received message from Master: op=PointingHead serial=271132 08:34:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:34:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:34:12 Point started: ret=0 [UTC 2019-3-14 08:34:12] 08:34:12 point_skyscan result=0 08:34:12 Check angles 08:34:12 SkyScan query 08:34:13 SkyScan query done: ret=0 az=151.17<-10078 ze=6.51<-11566 Statuses=0009 0008 08:34:13 Msec=0 True Az=151.17 Ze=6.51 Az status=0009 Ze status=0008 08:34:13 Check angles 08:34:13 SkyScan query 08:34:14 SkyScan query done: ret=0 az=133.62<-8908 ze=6.495<-11567 Statuses=0009 0008 08:34:14 Msec=750 True Az=133.62 Ze=6.495 Az status=0009 Ze status=0008 08:34:14 Check angles 08:34:14 SkyScan query 08:34:14 SkyScan query done: ret=0 az=115.8<-7720 ze=6.495<-11567 Statuses=0009 0008 08:34:14 Msec=1500 True Az=115.8 Ze=6.495 Az status=0009 Ze status=0008 08:34:15 Check angles 08:34:15 SkyScan query 08:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:34:15 Message to Master queued w/err=0: serial=271132 error=0 08:34:20 Received message from Master: op=Filter serial=271133 08:34:20 Color wheel filter change from 0 to 0 08:34:20 FLIGetFilterPos err=0 currentPosition=0 08:34:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:20 Filter is already there-color wheel unchanged 08:34:20 Received message from Master: op=Shutter serial=271134 08:34:20 Shutter LASER close 08:34:20 Received message from Camera: op=State serial=271136 08:34:20 GetSingleValue result=40 Value=cccccccc 08:34:20 SkyScan query 08:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:34:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:21 Parameters OK 08:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:21 Set A/D data flow result=40 08:34:21 Set A/D channel type result=40 08:34:21 Set A/D encoding result=40 08:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:21 Set channel filter=0.000000e+000 result=40 08:34:21 Config A/D Result=40 08:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:21 Get A/D filter: -9.255963e+061 result=40 08:34:21 Get A/D value=-858993460 result=40 08:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:21 Parameters OK 08:34:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:21 Set A/D data flow result=40 08:34:21 Set A/D channel type result=40 08:34:21 Set A/D encoding result=40 08:34:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:21 Set channel filter=0.000000e+000 result=40 08:34:21 Config A/D Result=40 08:34:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:21 Get A/D filter: -9.255963e+061 result=40 08:34:21 Get A/D value=-858993460 result=40 08:34:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:21 Aux= 08:34:21 Message to Camera, serial 271136 queued 08:34:58 Received message from Master: op=PointingHead serial=271149 08:34:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:34:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:34:58 Point started: ret=0 08:34:58 point_skyscan result=0 08:34:59 Check angles 08:34:59 SkyScan query 08:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 08:35:00 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 08:35:00 Check angles 08:35:00 SkyScan query 08:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 08:35:00 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 08:35:00 Check angles 08:35:00 SkyScan query 08:35:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 08:35:01 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 08:35:01 Check angles 08:35:01 SkyScan query 08:35:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 08:35:02 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 08:35:02 Check angles 08:35:02 SkyScan query 08:35:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 08:35:03 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 08:35:03 Check angles 08:35:03 SkyScan query 08:35:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 08:35:03 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 08:35:04 Check angles 08:35:04 SkyScan query 08:35:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.105<-22007 Statuses=0008 0009 08:35:04 Msec=4500 True Az=112.995 Ze=-150.105 Az status=0008 Ze status=0009 08:35:04 Check angles 08:35:04 SkyScan query 08:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.255<-23417 Statuses=0008 0009 08:35:05 Msec=5250 True Az=112.995 Ze=-171.255 Az status=0008 Ze status=0009 08:35:05 Check angles 08:35:05 SkyScan query 08:35:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:35:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:35:06 Message to Master queued w/err=0: serial=271149 error=0 08:35:11 Received message from Master: op=Filter serial=271150 08:35:11 Color wheel filter change from 0 to 0 08:35:11 FLIGetFilterPos err=0 currentPosition=0 08:35:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:11 Filter is already there-color wheel unchanged 08:35:11 Received message from Master: op=Shutter serial=271151 08:35:11 Shutter LASER open 08:35:11 Received message from Camera: op=State serial=271153 08:35:11 GetSingleValue result=40 Value=cccccccc 08:35:11 SkyScan query 08:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:35:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:12 Parameters OK 08:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:12 Set A/D data flow result=40 08:35:12 Set A/D channel type result=40 08:35:12 Set A/D encoding result=40 08:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:12 Set channel filter=0.000000e+000 result=40 08:35:12 Config A/D Result=40 08:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:12 Get A/D filter: -9.255963e+061 result=40 08:35:12 Get A/D value=-858993460 result=40 08:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:12 Parameters OK 08:35:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:12 Set A/D data flow result=40 08:35:12 Set A/D channel type result=40 08:35:12 Set A/D encoding result=40 08:35:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:12 Set channel filter=0.000000e+000 result=40 08:35:12 Config A/D Result=40 08:35:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:12 Get A/D filter: -9.255963e+061 result=40 08:35:12 Get A/D value=-858993460 result=40 08:35:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:12 Aux= 08:35:12 Message to Camera, serial 271153 queued 08:35:20 Received message from Master: op=Shutter serial=271163 08:35:20 Shutter LASER close 08:35:20 Received message from Master: op=PointingHead serial=271167 08:35:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:35:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:35:21 Point started: ret=0 08:35:21 point_skyscan result=0 08:35:22 Check angles 08:35:22 SkyScan query 08:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 08:35:22 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 08:35:22 Check angles 08:35:22 SkyScan query 08:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 08:35:23 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 08:35:23 Check angles 08:35:23 SkyScan query 08:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 08:35:24 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 08:35:24 Check angles 08:35:24 SkyScan query 08:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 08:35:24 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 08:35:25 Check angles 08:35:25 SkyScan query 08:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 08:35:25 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 08:35:25 Check angles 08:35:25 SkyScan query 08:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.53<-14502 Statuses=0008 0009 08:35:26 Msec=3750 True Az=112.995 Ze=-37.53 Az status=0008 Ze status=0009 08:35:26 Check angles 08:35:26 SkyScan query 08:35:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.56<-13104 Statuses=0008 0009 08:35:27 Msec=4500 True Az=112.995 Ze=-16.56 Az status=0008 Ze status=0009 08:35:27 Check angles 08:35:27 SkyScan query 08:35:27 SkyScan query done: ret=0 az=113.01<-7534 ze=4.305<-11713 Statuses=0008 0009 08:35:27 Msec=5250 True Az=113.01 Ze=4.305 Az status=0008 Ze status=0009 08:35:28 Check angles 08:35:28 SkyScan query 08:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:35:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:35:28 Message to Master queued w/err=0: serial=271167 error=0 08:35:33 Received message from Master: op=Filter serial=271168 08:35:33 Color wheel filter change from 0 to 0 08:35:33 FLIGetFilterPos err=0 currentPosition=0 08:35:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:33 Filter is already there-color wheel unchanged 08:35:33 Received message from Master: op=Shutter serial=271169 08:35:33 Shutter LASER close 08:35:34 Received message from Camera: op=State serial=271171 08:35:34 GetSingleValue result=40 Value=cccccccc 08:35:34 SkyScan query 08:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:34 Parameters OK 08:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:34 Set A/D data flow result=40 08:35:34 Set A/D channel type result=40 08:35:34 Set A/D encoding result=40 08:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:34 Set channel filter=0.000000e+000 result=40 08:35:34 Config A/D Result=40 08:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:34 Get A/D filter: -9.255963e+061 result=40 08:35:34 Get A/D value=-858993460 result=40 08:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:34 Parameters OK 08:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:34 Set A/D data flow result=40 08:35:34 Set A/D channel type result=40 08:35:34 Set A/D encoding result=40 08:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:34 Set channel filter=0.000000e+000 result=40 08:35:34 Config A/D Result=40 08:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:34 Get A/D filter: -9.255963e+061 result=40 08:35:34 Get A/D value=-858993460 result=40 08:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:34 Aux= 08:35:34 Message to Camera, serial 271171 queued 08:36:11 Received message from Master: op=PointingHead serial=271184 08:36:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:11 Point started: ret=0 08:36:11 point_skyscan result=0 08:36:12 Check angles 08:36:12 SkyScan query 08:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:36:13 Message to Master queued w/err=0: serial=271184 error=0 08:36:18 Received message from Master: op=Filter serial=271185 08:36:18 Color wheel filter change from 0 to 0 08:36:18 FLIGetFilterPos err=0 currentPosition=0 08:36:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:18 Filter is already there-color wheel unchanged 08:36:18 Received message from Master: op=Shutter serial=271186 08:36:18 Shutter LASER close 08:36:18 Received message from Camera: op=State serial=271188 08:36:18 GetSingleValue result=40 Value=cccccccc 08:36:18 SkyScan query 08:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:18 Parameters OK 08:36:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:18 Set A/D data flow result=40 08:36:18 Set A/D channel type result=40 08:36:18 Set A/D encoding result=40 08:36:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:18 Set channel filter=0.000000e+000 result=40 08:36:18 Config A/D Result=40 08:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:18 Get A/D filter: -9.255963e+061 result=40 08:36:18 Get A/D value=-858993460 result=40 08:36:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:18 Parameters OK 08:36:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:18 Set A/D data flow result=40 08:36:18 Set A/D channel type result=40 08:36:18 Set A/D encoding result=40 08:36:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:18 Set channel filter=0.000000e+000 result=40 08:36:18 Config A/D Result=40 08:36:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:18 Get A/D filter: -9.255963e+061 result=40 08:36:18 Get A/D value=-858993460 result=40 08:36:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:18 Aux= 08:36:18 Message to Camera, serial 271188 queued 08:36:55 Received message from Master: op=PointingHead serial=271201 08:36:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:36:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:36:56 Point started: ret=0 08:36:56 point_skyscan result=0 08:36:56 Check angles 08:36:56 SkyScan query 08:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:36:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:36:57 Message to Master queued w/err=0: serial=271201 error=0 08:37:02 Received message from Master: op=Filter serial=271202 08:37:02 Color wheel filter change from 0 to 0 08:37:02 FLIGetFilterPos err=0 currentPosition=0 08:37:02 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:02 Filter is already there-color wheel unchanged 08:37:02 Received message from Master: op=Shutter serial=271203 08:37:02 Shutter LASER close 08:37:02 Received message from Camera: op=State serial=271205 08:37:02 GetSingleValue result=40 Value=cccccccc 08:37:02 SkyScan query 08:37:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:03 Parameters OK 08:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:03 Set A/D data flow result=40 08:37:03 Set A/D channel type result=40 08:37:03 Set A/D encoding result=40 08:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:03 Set channel filter=0.000000e+000 result=40 08:37:03 Config A/D Result=40 08:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:03 Get A/D filter: -9.255963e+061 result=40 08:37:03 Get A/D value=-858993460 result=40 08:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:03 Parameters OK 08:37:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:03 Set A/D data flow result=40 08:37:03 Set A/D channel type result=40 08:37:03 Set A/D encoding result=40 08:37:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:03 Set channel filter=0.000000e+000 result=40 08:37:03 Config A/D Result=40 08:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:03 Get A/D filter: -9.255963e+061 result=40 08:37:03 Get A/D value=-858993460 result=40 08:37:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:03 Aux= 08:37:03 Message to Camera, serial 271205 queued 08:37:40 Received message from Master: op=PointingHead serial=271218 08:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:37:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:37:40 Point started: ret=0 08:37:40 point_skyscan result=0 08:37:41 Check angles 08:37:41 SkyScan query 08:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:37:41 Message to Master queued w/err=0: serial=271218 error=0 08:37:46 Received message from Master: op=Filter serial=271219 08:37:46 Color wheel filter change from 0 to 0 08:37:46 FLIGetFilterPos err=0 currentPosition=0 08:37:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:46 Filter is already there-color wheel unchanged 08:37:46 Received message from Master: op=Shutter serial=271220 08:37:46 Shutter LASER close 08:37:46 Received message from Camera: op=State serial=271222 08:37:46 GetSingleValue result=40 Value=cccccccc 08:37:46 SkyScan query 08:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:37:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:47 Parameters OK 08:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:47 Set A/D data flow result=40 08:37:47 Set A/D channel type result=40 08:37:47 Set A/D encoding result=40 08:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:47 Set channel filter=0.000000e+000 result=40 08:37:47 Config A/D Result=40 08:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:47 Get A/D filter: -9.255963e+061 result=40 08:37:47 Get A/D value=-858993460 result=40 08:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:47 Parameters OK 08:37:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:47 Set A/D data flow result=40 08:37:47 Set A/D channel type result=40 08:37:47 Set A/D encoding result=40 08:37:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:47 Set channel filter=0.000000e+000 result=40 08:37:47 Config A/D Result=40 08:37:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:47 Get A/D filter: -9.255963e+061 result=40 08:37:47 Get A/D value=-858993460 result=40 08:37:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:47 Aux= 08:37:47 Message to Camera, serial 271222 queued 08:38:23 Received message from Master: op=PointingHead serial=271234 08:38:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:38:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:38:23 Point started: ret=0 08:38:23 point_skyscan result=0 08:38:24 Check angles 08:38:24 SkyScan query 08:38:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 08:38:25 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 08:38:25 Check angles 08:38:25 SkyScan query 08:38:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.805<-14987 Statuses=0008 0009 08:38:25 Msec=750 True Az=112.995 Ze=-44.805 Az status=0008 Ze status=0009 08:38:26 Check angles 08:38:26 SkyScan query 08:38:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 08:38:26 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 08:38:26 Check angles 08:38:26 SkyScan query 08:38:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 08:38:27 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 08:38:27 Check angles 08:38:27 SkyScan query 08:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 08:38:28 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 08:38:28 Check angles 08:38:28 SkyScan query 08:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 08:38:28 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 08:38:29 Check angles 08:38:29 SkyScan query 08:38:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 08:38:29 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 08:38:29 Check angles 08:38:29 SkyScan query 08:38:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 08:38:30 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 08:38:30 Check angles 08:38:30 SkyScan query 08:38:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:38:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:38:31 Message to Master queued w/err=0: serial=271234 error=0 08:38:36 Received message from Master: op=Filter serial=271235 08:38:36 Color wheel filter change from 0 to 0 08:38:36 FLIGetFilterPos err=0 currentPosition=0 08:38:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:36 Filter is already there-color wheel unchanged 08:38:36 Received message from Master: op=Shutter serial=271236 08:38:36 Shutter LASER open 08:38:36 Received message from Camera: op=State serial=271238 08:38:36 GetSingleValue result=40 Value=cccccccc 08:38:36 SkyScan query 08:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:38:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:37 Parameters OK 08:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:37 Set A/D data flow result=40 08:38:37 Set A/D channel type result=40 08:38:37 Set A/D encoding result=40 08:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:37 Set channel filter=0.000000e+000 result=40 08:38:37 Config A/D Result=40 08:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:37 Get A/D filter: -9.255963e+061 result=40 08:38:37 Get A/D value=-858993460 result=40 08:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:37 Parameters OK 08:38:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:37 Set A/D data flow result=40 08:38:37 Set A/D channel type result=40 08:38:37 Set A/D encoding result=40 08:38:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:37 Set channel filter=0.000000e+000 result=40 08:38:37 Config A/D Result=40 08:38:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:37 Get A/D filter: -9.255963e+061 result=40 08:38:37 Get A/D value=-858993460 result=40 08:38:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:37 Aux= 08:38:37 Message to Camera, serial 271238 queued 08:38:45 Received message from Master: op=Shutter serial=271248 08:38:45 Shutter LASER close 08:38:46 Received message from Master: op=PointingHead serial=271252 08:38:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:38:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:38:46 Point started: ret=0 08:38:46 point_skyscan result=0 08:38:47 Check angles 08:38:47 SkyScan query 08:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.77<-21518 Statuses=0008 0009 08:38:47 Msec=0 True Az=112.995 Ze=-142.77 Az status=0008 Ze status=0009 08:38:47 Check angles 08:38:47 SkyScan query 08:38:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.77<-20118 Statuses=0008 0009 08:38:48 Msec=750 True Az=112.995 Ze=-121.77 Az status=0008 Ze status=0009 08:38:48 Check angles 08:38:48 SkyScan query 08:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 08:38:49 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 08:38:49 Check angles 08:38:49 SkyScan query 08:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.89<-17326 Statuses=0008 0009 08:38:49 Msec=2250 True Az=112.995 Ze=-79.89 Az status=0008 Ze status=0009 08:38:50 Check angles 08:38:50 SkyScan query 08:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.935<-15929 Statuses=0008 0009 08:38:50 Msec=3000 True Az=112.995 Ze=-58.935 Az status=0008 Ze status=0009 08:38:50 Check angles 08:38:50 SkyScan query 08:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 08:38:51 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 08:38:51 Check angles 08:38:51 SkyScan query 08:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 08:38:52 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 08:38:52 Check angles 08:38:52 SkyScan query 08:38:52 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 08:38:52 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 08:38:53 Check angles 08:38:53 SkyScan query 08:38:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:38:53 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:38:53 Message to Master queued w/err=0: serial=271252 error=0 08:38:58 Received message from Master: op=Filter serial=271253 08:38:58 Color wheel filter change from 0 to 0 08:38:58 FLIGetFilterPos err=0 currentPosition=0 08:38:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:58 Filter is already there-color wheel unchanged 08:38:58 Received message from Master: op=Shutter serial=271254 08:38:58 Shutter LASER close 08:38:59 Received message from Camera: op=State serial=271256 08:38:59 GetSingleValue result=40 Value=cccccccc 08:38:59 SkyScan query 08:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:38:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:59 Parameters OK 08:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:59 Set A/D data flow result=40 08:38:59 Set A/D channel type result=40 08:38:59 Set A/D encoding result=40 08:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:59 Set channel filter=0.000000e+000 result=40 08:38:59 Config A/D Result=40 08:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:59 Get A/D filter: -9.255963e+061 result=40 08:38:59 Get A/D value=-858993460 result=40 08:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:59 Parameters OK 08:38:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:59 Set A/D data flow result=40 08:38:59 Set A/D channel type result=40 08:38:59 Set A/D encoding result=40 08:38:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:59 Set channel filter=0.000000e+000 result=40 08:38:59 Config A/D Result=40 08:38:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:59 Get A/D filter: -9.255963e+061 result=40 08:38:59 Get A/D value=-858993460 result=40 08:38:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:59 Aux= 08:38:59 Message to Camera, serial 271256 queued 08:39:36 Received message from Master: op=PointingHead serial=271269 08:39:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:39:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:39:36 Point started: ret=0 08:39:36 point_skyscan result=0 08:39:37 Check angles 08:39:37 SkyScan query 08:39:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:39:38 Message to Master queued w/err=0: serial=271269 error=0 08:39:43 Received message from Master: op=Filter serial=271270 08:39:43 Color wheel filter change from 0 to 0 08:39:43 FLIGetFilterPos err=0 currentPosition=0 08:39:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:43 Filter is already there-color wheel unchanged 08:39:43 Received message from Master: op=Shutter serial=271271 08:39:43 Shutter LASER close 08:39:43 Received message from Camera: op=State serial=271273 08:39:43 GetSingleValue result=40 Value=cccccccc 08:39:43 SkyScan query 08:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:39:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:43 Parameters OK 08:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:43 Set A/D data flow result=40 08:39:43 Set A/D channel type result=40 08:39:43 Set A/D encoding result=40 08:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:43 Set channel filter=0.000000e+000 result=40 08:39:43 Config A/D Result=40 08:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:43 Get A/D filter: -9.255963e+061 result=40 08:39:43 Get A/D value=-858993460 result=40 08:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:43 Parameters OK 08:39:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:43 Set A/D data flow result=40 08:39:43 Set A/D channel type result=40 08:39:43 Set A/D encoding result=40 08:39:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:43 Set channel filter=0.000000e+000 result=40 08:39:43 Config A/D Result=40 08:39:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:43 Get A/D filter: -9.255963e+061 result=40 08:39:43 Get A/D value=-858993460 result=40 08:39:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:43 Aux= 08:39:43 Message to Camera, serial 271273 queued 08:40:20 Received message from Master: op=PointingHead serial=271286 08:40:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:40:20 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:40:21 Point started: ret=0 08:40:21 point_skyscan result=0 08:40:21 Check angles 08:40:21 SkyScan query 08:40:22 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 08:40:22 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 08:40:22 Check angles 08:40:22 SkyScan query 08:40:23 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 08:40:23 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 08:40:23 Check angles 08:40:23 SkyScan query 08:40:23 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 08:40:23 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 08:40:24 Check angles 08:40:24 SkyScan query 08:40:24 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:40:24 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:40:24 Message to Master queued w/err=0: serial=271286 error=0 08:40:29 Received message from Master: op=Filter serial=271287 08:40:29 Color wheel filter change from 0 to 0 08:40:29 FLIGetFilterPos err=0 currentPosition=0 08:40:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:29 Filter is already there-color wheel unchanged 08:40:29 Received message from Master: op=Shutter serial=271288 08:40:29 Shutter LASER close 08:40:29 Received message from Camera: op=State serial=271290 08:40:29 GetSingleValue result=40 Value=cccccccc 08:40:29 SkyScan query 08:40:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:30 Parameters OK 08:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:30 Set A/D data flow result=40 08:40:30 Set A/D channel type result=40 08:40:30 Set A/D encoding result=40 08:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:30 Set channel filter=0.000000e+000 result=40 08:40:30 Config A/D Result=40 08:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:30 Get A/D filter: -9.255963e+061 result=40 08:40:30 Get A/D value=-858993460 result=40 08:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:30 Parameters OK 08:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:30 Set A/D data flow result=40 08:40:30 Set A/D channel type result=40 08:40:30 Set A/D encoding result=40 08:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:30 Set channel filter=0.000000e+000 result=40 08:40:30 Config A/D Result=40 08:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:30 Get A/D filter: -9.255963e+061 result=40 08:40:30 Get A/D value=-858993460 result=40 08:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:30 Aux= 08:40:30 Message to Camera, serial 271290 queued 08:41:07 Received message from Master: op=PointingHead serial=271303 08:41:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:41:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:41:07 Point started: ret=0 08:41:07 point_skyscan result=0 08:41:08 Check angles 08:41:08 SkyScan query 08:41:09 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 08:41:09 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 08:41:09 Check angles 08:41:09 SkyScan query 08:41:09 SkyScan query done: ret=0 az=135.18<-9012 ze=6.495<-11567 Statuses=0009 0008 08:41:09 Msec=750 True Az=135.18 Ze=6.495 Az status=0009 Ze status=0008 08:41:10 Check angles 08:41:10 SkyScan query 08:41:10 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 08:41:10 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 08:41:10 Check angles 08:41:10 SkyScan query 08:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:41:11 Message to Master queued w/err=0: serial=271303 error=0 08:41:16 Received message from Master: op=Filter serial=271304 08:41:16 Color wheel filter change from 0 to 0 08:41:16 FLIGetFilterPos err=0 currentPosition=0 08:41:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:16 Filter is already there-color wheel unchanged 08:41:16 Received message from Master: op=Shutter serial=271305 08:41:16 Shutter LASER close 08:41:16 Received message from Camera: op=State serial=271307 08:41:16 GetSingleValue result=40 Value=cccccccc 08:41:16 SkyScan query 08:41:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:41:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:17 Parameters OK 08:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:17 Set A/D data flow result=40 08:41:17 Set A/D channel type result=40 08:41:17 Set A/D encoding result=40 08:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:17 Set channel filter=0.000000e+000 result=40 08:41:17 Config A/D Result=40 08:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:17 Get A/D filter: -9.255963e+061 result=40 08:41:17 Get A/D value=-858993460 result=40 08:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:17 Parameters OK 08:41:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:17 Set A/D data flow result=40 08:41:17 Set A/D channel type result=40 08:41:17 Set A/D encoding result=40 08:41:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:17 Set channel filter=0.000000e+000 result=40 08:41:17 Config A/D Result=40 08:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:17 Get A/D filter: -9.255963e+061 result=40 08:41:17 Get A/D value=-858993460 result=40 08:41:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:17 Aux= 08:41:17 Message to Camera, serial 271307 queued 08:41:54 Received message from Master: op=PointingHead serial=271320 08:41:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:41:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:41:54 Point started: ret=0 08:41:54 point_skyscan result=0 08:41:55 Check angles 08:41:55 SkyScan query 08:41:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 08:41:55 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 08:41:55 Check angles 08:41:55 SkyScan query 08:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 08:41:56 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 08:41:56 Check angles 08:41:56 SkyScan query 08:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.805<-16387 Statuses=0008 0009 08:41:57 Msec=1500 True Az=112.995 Ze=-65.805 Az status=0008 Ze status=0009 08:41:57 Check angles 08:41:57 SkyScan query 08:41:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 08:41:57 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 08:41:58 Check angles 08:41:58 SkyScan query 08:41:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.195<-19213 Statuses=0008 0009 08:41:58 Msec=3000 True Az=112.995 Ze=-108.195 Az status=0008 Ze status=0009 08:41:58 Check angles 08:41:58 SkyScan query 08:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.555<-20637 Statuses=0008 0009 08:41:59 Msec=3750 True Az=112.995 Ze=-129.555 Az status=0008 Ze status=0009 08:41:59 Check angles 08:41:59 SkyScan query 08:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.45<-22030 Statuses=0008 0009 08:42:00 Msec=4500 True Az=112.995 Ze=-150.45 Az status=0008 Ze status=0009 08:42:00 Check angles 08:42:00 SkyScan query 08:42:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.24<-23416 Statuses=0008 0009 08:42:00 Msec=5250 True Az=112.995 Ze=-171.24 Az status=0008 Ze status=0009 08:42:01 Check angles 08:42:01 SkyScan query 08:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:42:01 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:42:01 Message to Master queued w/err=0: serial=271320 error=0 08:42:06 Received message from Master: op=Filter serial=271321 08:42:06 Color wheel filter change from 0 to 0 08:42:06 FLIGetFilterPos err=0 currentPosition=0 08:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:06 Filter is already there-color wheel unchanged 08:42:06 Received message from Master: op=Shutter serial=271322 08:42:06 Shutter LASER open 08:42:07 Received message from Camera: op=State serial=271324 08:42:07 GetSingleValue result=40 Value=cccccccc 08:42:07 SkyScan query 08:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:42:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:07 Parameters OK 08:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:07 Set A/D data flow result=40 08:42:07 Set A/D channel type result=40 08:42:07 Set A/D encoding result=40 08:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:07 Set channel filter=0.000000e+000 result=40 08:42:07 Config A/D Result=40 08:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:07 Get A/D filter: -9.255963e+061 result=40 08:42:07 Get A/D value=-858993460 result=40 08:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:07 Parameters OK 08:42:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:07 Set A/D data flow result=40 08:42:07 Set A/D channel type result=40 08:42:07 Set A/D encoding result=40 08:42:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:07 Set channel filter=0.000000e+000 result=40 08:42:07 Config A/D Result=40 08:42:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:07 Get A/D filter: -9.255963e+061 result=40 08:42:07 Get A/D value=-858993460 result=40 08:42:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:07 Aux= 08:42:07 Message to Camera, serial 271324 queued 08:42:16 Received message from Master: op=Shutter serial=271334 08:42:16 Shutter LASER close 08:42:16 Received message from Master: op=PointingHead serial=271338 08:42:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:42:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:42:16 Point started: ret=0 08:42:16 point_skyscan result=0 08:42:17 Check angles 08:42:17 SkyScan query 08:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 08:42:18 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 08:42:18 Check angles 08:42:18 SkyScan query 08:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 08:42:18 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 08:42:19 Check angles 08:42:19 SkyScan query 08:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.29<-18686 Statuses=0008 0009 08:42:19 Msec=1500 True Az=112.995 Ze=-100.29 Az status=0008 Ze status=0009 08:42:19 Check angles 08:42:19 SkyScan query 08:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.335<-17289 Statuses=0008 0009 08:42:20 Msec=2250 True Az=112.995 Ze=-79.335 Az status=0008 Ze status=0009 08:42:20 Check angles 08:42:20 SkyScan query 08:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 08:42:21 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 08:42:21 Check angles 08:42:21 SkyScan query 08:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.08<-14472 Statuses=0008 0009 08:42:21 Msec=3750 True Az=112.995 Ze=-37.08 Az status=0008 Ze status=0009 08:42:22 Check angles 08:42:22 SkyScan query 08:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.08<-13072 Statuses=0008 0009 08:42:22 Msec=4500 True Az=112.995 Ze=-16.08 Az status=0008 Ze status=0009 08:42:22 Check angles 08:42:22 SkyScan query 08:42:23 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 08:42:23 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 08:42:23 Check angles 08:42:23 SkyScan query 08:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:42:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:42:24 Message to Master queued w/err=0: serial=271338 error=0 08:42:29 Received message from Master: op=Filter serial=271339 08:42:29 Color wheel filter change from 0 to 0 08:42:29 FLIGetFilterPos err=0 currentPosition=0 08:42:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:29 Filter is already there-color wheel unchanged 08:42:29 Received message from Master: op=Shutter serial=271340 08:42:29 Shutter LASER close 08:42:29 Received message from Camera: op=State serial=271342 08:42:29 GetSingleValue result=40 Value=cccccccc 08:42:29 SkyScan query 08:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:42:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:30 Parameters OK 08:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:30 Set A/D data flow result=40 08:42:30 Set A/D channel type result=40 08:42:30 Set A/D encoding result=40 08:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:30 Set channel filter=0.000000e+000 result=40 08:42:30 Config A/D Result=40 08:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:30 Get A/D filter: -9.255963e+061 result=40 08:42:30 Get A/D value=-858993460 result=40 08:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:30 Parameters OK 08:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:30 Set A/D data flow result=40 08:42:30 Set A/D channel type result=40 08:42:30 Set A/D encoding result=40 08:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:30 Set channel filter=0.000000e+000 result=40 08:42:30 Config A/D Result=40 08:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:30 Get A/D filter: -9.255963e+061 result=40 08:42:30 Get A/D value=-858993460 result=40 08:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:30 Aux= 08:42:30 Message to Camera, serial 271342 queued 08:43:07 Received message from Master: op=PointingHead serial=271355 08:43:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:07 Point started: ret=0 08:43:07 point_skyscan result=0 08:43:08 Check angles 08:43:08 SkyScan query 08:43:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:43:08 Message to Master queued w/err=0: serial=271355 error=0 08:43:13 Received message from Master: op=Filter serial=271356 08:43:13 Color wheel filter change from 0 to 0 08:43:13 FLIGetFilterPos err=0 currentPosition=0 08:43:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:13 Filter is already there-color wheel unchanged 08:43:13 Received message from Master: op=Shutter serial=271357 08:43:13 Shutter LASER close 08:43:13 Received message from Camera: op=State serial=271359 08:43:13 GetSingleValue result=40 Value=cccccccc 08:43:13 SkyScan query 08:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:14 Parameters OK 08:43:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:14 Set A/D data flow result=40 08:43:14 Set A/D channel type result=40 08:43:14 Set A/D encoding result=40 08:43:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:14 Set channel filter=0.000000e+000 result=40 08:43:14 Config A/D Result=40 08:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:14 Get A/D filter: -9.255963e+061 result=40 08:43:14 Get A/D value=-858993460 result=40 08:43:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:14 Parameters OK 08:43:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:14 Set A/D data flow result=40 08:43:14 Set A/D channel type result=40 08:43:14 Set A/D encoding result=40 08:43:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:14 Set channel filter=0.000000e+000 result=40 08:43:14 Config A/D Result=40 08:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:14 Get A/D filter: -9.255963e+061 result=40 08:43:14 Get A/D value=-858993460 result=40 08:43:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:14 Aux= 08:43:14 Message to Camera, serial 271359 queued [UTC 2019-3-14 08:43:48] 08:43:51 Received message from Master: op=PointingHead serial=271372 08:43:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:43:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:43:51 Point started: ret=0 08:43:51 point_skyscan result=0 08:43:52 Check angles 08:43:52 SkyScan query 08:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:43:53 Message to Master queued w/err=0: serial=271372 error=0 08:43:58 Received message from Master: op=Filter serial=271373 08:43:58 Color wheel filter change from 0 to 0 08:43:58 FLIGetFilterPos err=0 currentPosition=0 08:43:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:58 Filter is already there-color wheel unchanged 08:43:58 Received message from Master: op=Shutter serial=271374 08:43:58 Shutter LASER close 08:43:58 Received message from Camera: op=State serial=271376 08:43:58 GetSingleValue result=40 Value=cccccccc 08:43:58 SkyScan query 08:43:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:43:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:58 Parameters OK 08:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:58 Set A/D data flow result=40 08:43:58 Set A/D channel type result=40 08:43:58 Set A/D encoding result=40 08:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:58 Set channel filter=0.000000e+000 result=40 08:43:58 Config A/D Result=40 08:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:58 Get A/D filter: -9.255963e+061 result=40 08:43:58 Get A/D value=-858993460 result=40 08:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:58 Parameters OK 08:43:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:58 Set A/D data flow result=40 08:43:58 Set A/D channel type result=40 08:43:58 Set A/D encoding result=40 08:43:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:58 Set channel filter=0.000000e+000 result=40 08:43:58 Config A/D Result=40 08:43:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:58 Get A/D filter: -9.255963e+061 result=40 08:43:58 Get A/D value=-858993460 result=40 08:43:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:58 Aux= 08:43:58 Message to Camera, serial 271376 queued 08:44:35 Received message from Master: op=PointingHead serial=271389 08:44:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:44:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:44:36 Point started: ret=0 08:44:36 point_skyscan result=0 08:44:36 Check angles 08:44:36 SkyScan query 08:44:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:44:37 Message to Master queued w/err=0: serial=271389 error=0 08:44:42 Received message from Master: op=Filter serial=271390 08:44:42 Color wheel filter change from 0 to 0 08:44:42 FLIGetFilterPos err=0 currentPosition=0 08:44:42 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:42 Filter is already there-color wheel unchanged 08:44:42 Received message from Master: op=Shutter serial=271391 08:44:42 Shutter LASER close 08:44:42 Received message from Camera: op=State serial=271393 08:44:42 GetSingleValue result=40 Value=cccccccc 08:44:42 SkyScan query 08:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:44:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:43 Parameters OK 08:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:43 Set A/D data flow result=40 08:44:43 Set A/D channel type result=40 08:44:43 Set A/D encoding result=40 08:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:43 Set channel filter=0.000000e+000 result=40 08:44:43 Config A/D Result=40 08:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:43 Get A/D filter: -9.255963e+061 result=40 08:44:43 Get A/D value=-858993460 result=40 08:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:43 Parameters OK 08:44:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:43 Set A/D data flow result=40 08:44:43 Set A/D channel type result=40 08:44:43 Set A/D encoding result=40 08:44:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:43 Set channel filter=0.000000e+000 result=40 08:44:43 Config A/D Result=40 08:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:43 Get A/D filter: -9.255963e+061 result=40 08:44:43 Get A/D value=-858993460 result=40 08:44:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:43 Aux= 08:44:43 Message to Camera, serial 271393 queued 08:45:19 Received message from Master: op=PointingHead serial=271406 08:45:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:45:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:45:20 Point started: ret=0 08:45:20 point_skyscan result=0 08:45:21 Check angles 08:45:21 SkyScan query 08:45:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 08:45:21 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 08:45:21 Check angles 08:45:21 SkyScan query 08:45:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 08:45:22 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 08:45:22 Check angles 08:45:22 SkyScan query 08:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.775<-16385 Statuses=0008 0009 08:45:23 Msec=1500 True Az=112.995 Ze=-65.775 Az status=0008 Ze status=0009 08:45:23 Check angles 08:45:23 SkyScan query 08:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.73<-17782 Statuses=0008 0009 08:45:23 Msec=2250 True Az=112.995 Ze=-86.73 Az status=0008 Ze status=0009 08:45:24 Check angles 08:45:24 SkyScan query 08:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 08:45:24 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 08:45:24 Check angles 08:45:24 SkyScan query 08:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 08:45:25 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 08:45:25 Check angles 08:45:25 SkyScan query 08:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 08:45:26 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 08:45:26 Check angles 08:45:26 SkyScan query 08:45:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.565<-23371 Statuses=0008 0009 08:45:26 Msec=5250 True Az=112.995 Ze=-170.565 Az status=0008 Ze status=0009 08:45:27 Check angles 08:45:27 SkyScan query 08:45:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:45:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:45:27 Message to Master queued w/err=0: serial=271406 error=0 08:45:32 Received message from Master: op=Filter serial=271407 08:45:32 Color wheel filter change from 0 to 0 08:45:32 FLIGetFilterPos err=0 currentPosition=0 08:45:32 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:32 Filter is already there-color wheel unchanged 08:45:32 Received message from Master: op=Shutter serial=271408 08:45:32 Shutter LASER open 08:45:33 Received message from Camera: op=State serial=271410 08:45:33 GetSingleValue result=40 Value=cccccccc 08:45:33 SkyScan query 08:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:45:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:33 Parameters OK 08:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:33 Set A/D data flow result=40 08:45:33 Set A/D channel type result=40 08:45:33 Set A/D encoding result=40 08:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:33 Set channel filter=0.000000e+000 result=40 08:45:33 Config A/D Result=40 08:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:33 Get A/D filter: -9.255963e+061 result=40 08:45:33 Get A/D value=-858993460 result=40 08:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:33 Parameters OK 08:45:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:33 Set A/D data flow result=40 08:45:33 Set A/D channel type result=40 08:45:33 Set A/D encoding result=40 08:45:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:33 Set channel filter=0.000000e+000 result=40 08:45:33 Config A/D Result=40 08:45:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:33 Get A/D filter: -9.255963e+061 result=40 08:45:33 Get A/D value=-858993460 result=40 08:45:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:33 Aux= 08:45:33 Message to Camera, serial 271410 queued 08:45:42 Received message from Master: op=Shutter serial=271420 08:45:42 Shutter LASER close 08:45:42 Received message from Master: op=PointingHead serial=271424 08:45:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:45:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:45:42 Point started: ret=0 08:45:42 point_skyscan result=0 08:45:43 Check angles 08:45:43 SkyScan query 08:45:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 08:45:44 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 08:45:44 Check angles 08:45:44 SkyScan query 08:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.62<-20108 Statuses=0008 0009 08:45:45 Msec=750 True Az=112.995 Ze=-121.62 Az status=0008 Ze status=0009 08:45:45 Check angles 08:45:45 SkyScan query 08:45:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.68<-18712 Statuses=0008 0009 08:45:45 Msec=1500 True Az=112.995 Ze=-100.68 Az status=0008 Ze status=0009 08:45:45 Check angles 08:45:45 SkyScan query 08:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.71<-17314 Statuses=0008 0009 08:45:46 Msec=2250 True Az=112.995 Ze=-79.71 Az status=0008 Ze status=0009 08:45:46 Check angles 08:45:46 SkyScan query 08:45:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.755<-15917 Statuses=0008 0009 08:45:47 Msec=3000 True Az=112.995 Ze=-58.755 Az status=0008 Ze status=0009 08:45:47 Check angles 08:45:47 SkyScan query 08:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.785<-14519 Statuses=0008 0009 08:45:48 Msec=3750 True Az=112.995 Ze=-37.785 Az status=0008 Ze status=0009 08:45:48 Check angles 08:45:48 SkyScan query 08:45:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.83<-13122 Statuses=0008 0009 08:45:48 Msec=4500 True Az=112.995 Ze=-16.83 Az status=0008 Ze status=0009 08:45:48 Check angles 08:45:48 SkyScan query 08:45:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 08:45:49 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 08:45:49 Check angles 08:45:49 SkyScan query 08:45:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:45:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:45:50 Message to Master queued w/err=0: serial=271424 error=0 08:45:55 Received message from Master: op=Filter serial=271425 08:45:55 Color wheel filter change from 0 to 0 08:45:55 FLIGetFilterPos err=0 currentPosition=0 08:45:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:55 Filter is already there-color wheel unchanged 08:45:55 Received message from Master: op=Shutter serial=271426 08:45:55 Shutter LASER close 08:45:55 Received message from Camera: op=State serial=271428 08:45:55 GetSingleValue result=40 Value=cccccccc 08:45:55 SkyScan query 08:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:45:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:56 Parameters OK 08:45:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:56 Set A/D data flow result=40 08:45:56 Set A/D channel type result=40 08:45:56 Set A/D encoding result=40 08:45:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:56 Set channel filter=0.000000e+000 result=40 08:45:56 Config A/D Result=40 08:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:56 Get A/D filter: -9.255963e+061 result=40 08:45:56 Get A/D value=-858993460 result=40 08:45:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:56 Parameters OK 08:45:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:56 Set A/D data flow result=40 08:45:56 Set A/D channel type result=40 08:45:56 Set A/D encoding result=40 08:45:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:56 Set channel filter=0.000000e+000 result=40 08:45:56 Config A/D Result=40 08:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:56 Get A/D filter: -9.255963e+061 result=40 08:45:56 Get A/D value=-858993460 result=40 08:45:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:56 Aux= 08:45:56 Message to Camera, serial 271428 queued 08:46:33 Received message from Master: op=PointingHead serial=271441 08:46:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:46:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:46:33 Point started: ret=0 08:46:33 point_skyscan result=0 08:46:34 Check angles 08:46:34 SkyScan query 08:46:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:46:34 Message to Master queued w/err=0: serial=271441 error=0 08:46:39 Received message from Master: op=Filter serial=271442 08:46:39 Color wheel filter change from 0 to 0 08:46:39 FLIGetFilterPos err=0 currentPosition=0 08:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:39 Filter is already there-color wheel unchanged 08:46:39 Received message from Master: op=Shutter serial=271443 08:46:39 Shutter LASER close 08:46:39 Received message from Camera: op=State serial=271445 08:46:39 GetSingleValue result=40 Value=cccccccc 08:46:39 SkyScan query 08:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:40 Parameters OK 08:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:40 Set A/D data flow result=40 08:46:40 Set A/D channel type result=40 08:46:40 Set A/D encoding result=40 08:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:40 Set channel filter=0.000000e+000 result=40 08:46:40 Config A/D Result=40 08:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:40 Get A/D filter: -9.255963e+061 result=40 08:46:40 Get A/D value=-858993460 result=40 08:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:40 Parameters OK 08:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:40 Set A/D data flow result=40 08:46:40 Set A/D channel type result=40 08:46:40 Set A/D encoding result=40 08:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:40 Set channel filter=0.000000e+000 result=40 08:46:40 Config A/D Result=40 08:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:40 Get A/D filter: -9.255963e+061 result=40 08:46:40 Get A/D value=-858993460 result=40 08:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:40 Aux= 08:46:40 Message to Camera, serial 271445 queued 08:47:17 Received message from Master: op=PointingHead serial=271458 08:47:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:47:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:47:17 Point started: ret=0 08:47:17 point_skyscan result=0 08:47:18 Check angles 08:47:18 SkyScan query 08:47:19 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 08:47:19 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 08:47:19 Check angles 08:47:19 SkyScan query 08:47:19 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 08:47:19 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 08:47:20 Check angles 08:47:20 SkyScan query 08:47:20 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 08:47:20 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 08:47:20 Check angles 08:47:20 SkyScan query 08:47:21 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:47:21 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:47:21 Message to Master queued w/err=0: serial=271458 error=0 08:47:26 Received message from Master: op=Filter serial=271459 08:47:26 Color wheel filter change from 0 to 0 08:47:26 FLIGetFilterPos err=0 currentPosition=0 08:47:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:26 Filter is already there-color wheel unchanged 08:47:26 Received message from Master: op=Shutter serial=271460 08:47:26 Shutter LASER close 08:47:26 Received message from Camera: op=State serial=271462 08:47:26 GetSingleValue result=40 Value=cccccccc 08:47:26 SkyScan query 08:47:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:47:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:27 Parameters OK 08:47:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:27 Set A/D data flow result=40 08:47:27 Set A/D channel type result=40 08:47:27 Set A/D encoding result=40 08:47:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:27 Set channel filter=0.000000e+000 result=40 08:47:27 Config A/D Result=40 08:47:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:27 Get A/D filter: -9.255963e+061 result=40 08:47:27 Get A/D value=-858993460 result=40 08:47:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:27 Parameters OK 08:47:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:27 Set A/D data flow result=40 08:47:27 Set A/D channel type result=40 08:47:27 Set A/D encoding result=40 08:47:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:27 Set channel filter=0.000000e+000 result=40 08:47:27 Config A/D Result=40 08:47:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:27 Get A/D filter: -9.255963e+061 result=40 08:47:27 Get A/D value=-858993460 result=40 08:47:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:27 Aux= 08:47:27 Message to Camera, serial 271462 queued 08:48:04 Received message from Master: op=PointingHead serial=271475 08:48:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:48:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:48:04 Point started: ret=0 08:48:04 point_skyscan result=0 08:48:05 Check angles 08:48:05 SkyScan query 08:48:05 SkyScan query done: ret=0 az=152.535<-10169 ze=6.51<-11566 Statuses=0009 0008 08:48:05 Msec=0 True Az=152.535 Ze=6.51 Az status=0009 Ze status=0008 08:48:05 Check angles 08:48:05 SkyScan query 08:48:06 SkyScan query done: ret=0 az=134.73<-8982 ze=6.495<-11567 Statuses=0009 0008 08:48:06 Msec=750 True Az=134.73 Ze=6.495 Az status=0009 Ze status=0008 08:48:06 Check angles 08:48:06 SkyScan query 08:48:07 SkyScan query done: ret=0 az=116.76<-7784 ze=6.495<-11567 Statuses=0009 0008 08:48:07 Msec=1500 True Az=116.76 Ze=6.495 Az status=0009 Ze status=0008 08:48:07 Check angles 08:48:07 SkyScan query 08:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:48:07 Message to Master queued w/err=0: serial=271475 error=0 08:48:12 Received message from Master: op=Filter serial=271476 08:48:12 Color wheel filter change from 0 to 0 08:48:12 FLIGetFilterPos err=0 currentPosition=0 08:48:12 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:12 Filter is already there-color wheel unchanged 08:48:13 Received message from Master: op=Shutter serial=271477 08:48:13 Shutter LASER close 08:48:13 Received message from Camera: op=State serial=271479 08:48:13 GetSingleValue result=40 Value=cccccccc 08:48:13 SkyScan query 08:48:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:48:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:13 Parameters OK 08:48:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:13 Set A/D data flow result=40 08:48:13 Set A/D channel type result=40 08:48:13 Set A/D encoding result=40 08:48:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:13 Set channel filter=0.000000e+000 result=40 08:48:13 Config A/D Result=40 08:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:13 Get A/D filter: -9.255963e+061 result=40 08:48:13 Get A/D value=-858993460 result=40 08:48:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:13 Parameters OK 08:48:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:13 Set A/D data flow result=40 08:48:13 Set A/D channel type result=40 08:48:13 Set A/D encoding result=40 08:48:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:13 Set channel filter=0.000000e+000 result=40 08:48:13 Config A/D Result=40 08:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:13 Get A/D filter: -9.255963e+061 result=40 08:48:13 Get A/D value=-858993460 result=40 08:48:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:13 Aux= 08:48:13 Message to Camera, serial 271479 queued 08:48:50 Received message from Master: op=PointingHead serial=271492 08:48:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:48:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:48:50 Point started: ret=0 08:48:50 point_skyscan result=0 08:48:51 Check angles 08:48:51 SkyScan query 08:48:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 08:48:52 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 08:48:52 Check angles 08:48:52 SkyScan query 08:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 08:48:53 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 08:48:53 Check angles 08:48:53 SkyScan query 08:48:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.895<-16393 Statuses=0008 0009 08:48:53 Msec=1500 True Az=112.995 Ze=-65.895 Az status=0008 Ze status=0009 08:48:53 Check angles 08:48:53 SkyScan query 08:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.88<-17792 Statuses=0008 0009 08:48:54 Msec=2250 True Az=112.995 Ze=-86.88 Az status=0008 Ze status=0009 08:48:54 Check angles 08:48:54 SkyScan query 08:48:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.85<-19190 Statuses=0008 0009 08:48:55 Msec=3000 True Az=112.995 Ze=-107.85 Az status=0008 Ze status=0009 08:48:55 Check angles 08:48:55 SkyScan query 08:48:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 08:48:56 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 08:48:56 Check angles 08:48:56 SkyScan query 08:48:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 08:48:56 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 08:48:56 Check angles 08:48:56 SkyScan query 08:48:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.67<-23378 Statuses=0008 0009 08:48:57 Msec=5250 True Az=112.995 Ze=-170.67 Az status=0008 Ze status=0009 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:48:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:48:58 Message to Master queued w/err=0: serial=271492 error=0 08:49:03 Received message from Master: op=Filter serial=271493 08:49:03 Color wheel filter change from 0 to 0 08:49:03 FLIGetFilterPos err=0 currentPosition=0 08:49:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:03 Filter is already there-color wheel unchanged 08:49:03 Received message from Master: op=Shutter serial=271494 08:49:03 Shutter LASER open 08:49:03 Received message from Camera: op=State serial=271496 08:49:03 GetSingleValue result=40 Value=cccccccc 08:49:03 SkyScan query 08:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:49:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:04 Parameters OK 08:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:04 Set A/D data flow result=40 08:49:04 Set A/D channel type result=40 08:49:04 Set A/D encoding result=40 08:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:04 Set channel filter=0.000000e+000 result=40 08:49:04 Config A/D Result=40 08:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:04 Get A/D filter: -9.255963e+061 result=40 08:49:04 Get A/D value=-858993460 result=40 08:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:04 Parameters OK 08:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:04 Set A/D data flow result=40 08:49:04 Set A/D channel type result=40 08:49:04 Set A/D encoding result=40 08:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:04 Set channel filter=0.000000e+000 result=40 08:49:04 Config A/D Result=40 08:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:04 Get A/D filter: -9.255963e+061 result=40 08:49:04 Get A/D value=-858993460 result=40 08:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:04 Aux= 08:49:04 Message to Camera, serial 271496 queued 08:49:12 Received message from Master: op=Shutter serial=271506 08:49:12 Shutter LASER close 08:49:13 Received message from Master: op=PointingHead serial=271510 08:49:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:49:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:49:13 Point started: ret=0 08:49:13 point_skyscan result=0 08:49:14 Check angles 08:49:14 SkyScan query 08:49:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 08:49:14 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 08:49:14 Check angles 08:49:14 SkyScan query 08:49:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 08:49:15 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 08:49:15 Check angles 08:49:15 SkyScan query 08:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 08:49:16 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 08:49:16 Check angles 08:49:16 SkyScan query 08:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 08:49:17 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 08:49:17 Check angles 08:49:17 SkyScan query 08:49:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 08:49:17 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 08:49:17 Check angles 08:49:17 SkyScan query 08:49:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 08:49:18 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 08:49:18 Check angles 08:49:18 SkyScan query 08:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 08:49:19 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 08:49:19 Check angles 08:49:19 SkyScan query 08:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 08:49:20 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 08:49:20 Check angles 08:49:20 SkyScan query 08:49:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:49:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:49:20 Message to Master queued w/err=0: serial=271510 error=0 08:49:25 Received message from Master: op=Filter serial=271511 08:49:25 Color wheel filter change from 0 to 0 08:49:25 FLIGetFilterPos err=0 currentPosition=0 08:49:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:25 Filter is already there-color wheel unchanged 08:49:25 Received message from Master: op=Shutter serial=271512 08:49:25 Shutter LASER close 08:49:26 Received message from Camera: op=State serial=271514 08:49:26 GetSingleValue result=40 Value=cccccccc 08:49:26 SkyScan query 08:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:49:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:26 Parameters OK 08:49:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:26 Set A/D data flow result=40 08:49:26 Set A/D channel type result=40 08:49:26 Set A/D encoding result=40 08:49:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:26 Set channel filter=0.000000e+000 result=40 08:49:26 Config A/D Result=40 08:49:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:26 Get A/D filter: -9.255963e+061 result=40 08:49:26 Get A/D value=-858993460 result=40 08:49:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:26 Parameters OK 08:49:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:26 Set A/D data flow result=40 08:49:26 Set A/D channel type result=40 08:49:26 Set A/D encoding result=40 08:49:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:26 Set channel filter=0.000000e+000 result=40 08:49:26 Config A/D Result=40 08:49:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:26 Get A/D filter: -9.255963e+061 result=40 08:49:26 Get A/D value=-858993460 result=40 08:49:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:26 Aux= 08:49:26 Message to Camera, serial 271514 queued 08:50:03 Received message from Master: op=PointingHead serial=271527 08:50:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:50:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:03 Point started: ret=0 08:50:03 point_skyscan result=0 08:50:04 Check angles 08:50:04 SkyScan query 08:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:05 Message to Master queued w/err=0: serial=271527 error=0 08:50:10 Received message from Master: op=Filter serial=271528 08:50:10 Color wheel filter change from 0 to 0 08:50:10 FLIGetFilterPos err=0 currentPosition=0 08:50:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:10 Filter is already there-color wheel unchanged 08:50:10 Received message from Master: op=Shutter serial=271529 08:50:10 Shutter LASER close 08:50:10 Received message from Camera: op=State serial=271531 08:50:10 GetSingleValue result=40 Value=cccccccc 08:50:10 SkyScan query 08:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:11 Parameters OK 08:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:11 Set A/D data flow result=40 08:50:11 Set A/D channel type result=40 08:50:11 Set A/D encoding result=40 08:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:11 Set channel filter=0.000000e+000 result=40 08:50:11 Config A/D Result=40 08:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:11 Get A/D filter: -9.255963e+061 result=40 08:50:11 Get A/D value=-858993460 result=40 08:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:11 Parameters OK 08:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:11 Set A/D data flow result=40 08:50:11 Set A/D channel type result=40 08:50:11 Set A/D encoding result=40 08:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:11 Set channel filter=0.000000e+000 result=40 08:50:11 Config A/D Result=40 08:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:11 Get A/D filter: -9.255963e+061 result=40 08:50:11 Get A/D value=-858993460 result=40 08:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:11 Aux= 08:50:11 Message to Camera, serial 271531 queued 08:50:47 Received message from Master: op=PointingHead serial=271544 08:50:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:50:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:50:48 Point started: ret=0 08:50:48 point_skyscan result=0 08:50:48 Check angles 08:50:48 SkyScan query 08:50:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:50:49 Message to Master queued w/err=0: serial=271544 error=0 08:50:54 Received message from Master: op=Filter serial=271545 08:50:54 Color wheel filter change from 0 to 0 08:50:54 FLIGetFilterPos err=0 currentPosition=0 08:50:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:54 Filter is already there-color wheel unchanged 08:50:54 Received message from Master: op=Shutter serial=271546 08:50:54 Shutter LASER close 08:50:54 Received message from Camera: op=State serial=271548 08:50:54 GetSingleValue result=40 Value=cccccccc 08:50:54 SkyScan query 08:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:50:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:55 Parameters OK 08:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:55 Set A/D data flow result=40 08:50:55 Set A/D channel type result=40 08:50:55 Set A/D encoding result=40 08:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:55 Set channel filter=0.000000e+000 result=40 08:50:55 Config A/D Result=40 08:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:55 Get A/D filter: -9.255963e+061 result=40 08:50:55 Get A/D value=-858993460 result=40 08:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:55 Parameters OK 08:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:55 Set A/D data flow result=40 08:50:55 Set A/D channel type result=40 08:50:55 Set A/D encoding result=40 08:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:55 Set channel filter=0.000000e+000 result=40 08:50:55 Config A/D Result=40 08:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:55 Get A/D filter: -9.255963e+061 result=40 08:50:55 Get A/D value=-858993460 result=40 08:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:55 Aux= 08:50:55 Message to Camera, serial 271548 queued 08:51:32 Received message from Master: op=PointingHead serial=271561 08:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:51:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:51:32 Point started: ret=0 08:51:32 point_skyscan result=0 08:51:33 Check angles 08:51:33 SkyScan query 08:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:51:33 Message to Master queued w/err=0: serial=271561 error=0 08:51:38 Received message from Master: op=Filter serial=271562 08:51:38 Color wheel filter change from 0 to 0 08:51:38 FLIGetFilterPos err=0 currentPosition=0 08:51:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:38 Filter is already there-color wheel unchanged 08:51:39 Received message from Master: op=Shutter serial=271563 08:51:39 Shutter LASER close 08:51:39 Received message from Camera: op=State serial=271565 08:51:39 GetSingleValue result=40 Value=cccccccc 08:51:39 SkyScan query 08:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:51:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:39 Parameters OK 08:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:39 Set A/D data flow result=40 08:51:39 Set A/D channel type result=40 08:51:39 Set A/D encoding result=40 08:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:39 Set channel filter=0.000000e+000 result=40 08:51:39 Config A/D Result=40 08:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:39 Get A/D filter: -9.255963e+061 result=40 08:51:39 Get A/D value=-858993460 result=40 08:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:39 Parameters OK 08:51:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:39 Set A/D data flow result=40 08:51:39 Set A/D channel type result=40 08:51:39 Set A/D encoding result=40 08:51:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:39 Set channel filter=0.000000e+000 result=40 08:51:39 Config A/D Result=40 08:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:39 Get A/D filter: -9.255963e+061 result=40 08:51:39 Get A/D value=-858993460 result=40 08:51:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:39 Aux= 08:51:39 Message to Camera, serial 271565 queued 08:52:16 Received message from Master: op=PointingHead serial=271578 08:52:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:52:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:52:16 Point started: ret=0 08:52:16 point_skyscan result=0 08:52:17 Check angles 08:52:17 SkyScan query 08:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 08:52:18 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 08:52:18 Check angles 08:52:18 SkyScan query 08:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.82<-14988 Statuses=0008 0009 08:52:19 Msec=750 True Az=112.995 Ze=-44.82 Az status=0008 Ze status=0009 08:52:19 Check angles 08:52:19 SkyScan query 08:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.225<-16415 Statuses=0008 0009 08:52:19 Msec=1500 True Az=112.995 Ze=-66.225 Az status=0008 Ze status=0009 08:52:19 Check angles 08:52:19 SkyScan query 08:52:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.195<-17813 Statuses=0008 0009 08:52:20 Msec=2250 True Az=112.995 Ze=-87.195 Az status=0008 Ze status=0009 08:52:20 Check angles 08:52:20 SkyScan query 08:52:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.15<-19210 Statuses=0008 0009 08:52:21 Msec=3000 True Az=112.995 Ze=-108.15 Az status=0008 Ze status=0009 08:52:21 Check angles 08:52:21 SkyScan query 08:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.525<-20635 Statuses=0008 0009 08:52:22 Msec=3750 True Az=112.995 Ze=-129.525 Az status=0008 Ze status=0009 08:52:22 Check angles 08:52:22 SkyScan query 08:52:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.855<-22057 Statuses=0008 0009 08:52:22 Msec=4500 True Az=112.995 Ze=-150.855 Az status=0008 Ze status=0009 08:52:23 Check angles 08:52:23 SkyScan query 08:52:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.525<-23435 Statuses=0008 0009 08:52:23 Msec=5250 True Az=112.995 Ze=-171.525 Az status=0008 Ze status=0009 08:52:23 Check angles 08:52:23 SkyScan query 08:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:52:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:52:24 Message to Master queued w/err=0: serial=271578 error=0 08:52:29 Received message from Master: op=Filter serial=271579 08:52:29 Color wheel filter change from 0 to 0 08:52:29 FLIGetFilterPos err=0 currentPosition=0 08:52:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:29 Filter is already there-color wheel unchanged 08:52:29 Received message from Master: op=Shutter serial=271580 08:52:29 Shutter LASER open 08:52:29 Received message from Camera: op=State serial=271582 08:52:29 GetSingleValue result=40 Value=cccccccc 08:52:29 SkyScan query 08:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:52:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:30 Parameters OK 08:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:30 Set A/D data flow result=40 08:52:30 Set A/D channel type result=40 08:52:30 Set A/D encoding result=40 08:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:30 Set channel filter=0.000000e+000 result=40 08:52:30 Config A/D Result=40 08:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:30 Get A/D filter: -9.255963e+061 result=40 08:52:30 Get A/D value=-858993460 result=40 08:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:30 Parameters OK 08:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:30 Set A/D data flow result=40 08:52:30 Set A/D channel type result=40 08:52:30 Set A/D encoding result=40 08:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:30 Set channel filter=0.000000e+000 result=40 08:52:30 Config A/D Result=40 08:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:30 Get A/D filter: -9.255963e+061 result=40 08:52:30 Get A/D value=-858993460 result=40 08:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:30 Aux= 08:52:30 Message to Camera, serial 271582 queued 08:52:38 Received message from Master: op=Shutter serial=271592 08:52:38 Shutter LASER close 08:52:39 Received message from Master: op=PointingHead serial=271596 08:52:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:52:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:52:39 Point started: ret=0 08:52:39 point_skyscan result=0 08:52:40 Check angles 08:52:40 SkyScan query 08:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.8<-21520 Statuses=0008 0009 08:52:40 Msec=0 True Az=112.995 Ze=-142.8 Az status=0008 Ze status=0009 08:52:41 Check angles 08:52:41 SkyScan query 08:52:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 08:52:41 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 08:52:41 Check angles 08:52:41 SkyScan query 08:52:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 08:52:42 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 08:52:42 Check angles 08:52:42 SkyScan query 08:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 08:52:43 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 08:52:43 Check angles 08:52:43 SkyScan query 08:52:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 08:52:43 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 08:52:44 Check angles 08:52:44 SkyScan query 08:52:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 08:52:44 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 08:52:44 Check angles 08:52:44 SkyScan query 08:52:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.605<-13107 Statuses=0008 0009 08:52:45 Msec=4500 True Az=112.995 Ze=-16.605 Az status=0008 Ze status=0009 08:52:45 Check angles 08:52:45 SkyScan query 08:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 08:52:46 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 08:52:46 Check angles 08:52:46 SkyScan query 08:52:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:52:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:52:46 Message to Master queued w/err=0: serial=271596 error=0 08:52:51 Received message from Master: op=Filter serial=271597 08:52:51 Color wheel filter change from 0 to 0 08:52:51 FLIGetFilterPos err=0 currentPosition=0 08:52:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:51 Filter is already there-color wheel unchanged 08:52:52 Received message from Master: op=Shutter serial=271598 08:52:52 Shutter LASER close 08:52:52 Received message from Camera: op=State serial=271600 08:52:52 GetSingleValue result=40 Value=cccccccc 08:52:52 SkyScan query 08:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:52:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:52 Parameters OK 08:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:52 Set A/D data flow result=40 08:52:52 Set A/D channel type result=40 08:52:52 Set A/D encoding result=40 08:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:52 Set channel filter=0.000000e+000 result=40 08:52:52 Config A/D Result=40 08:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:52 Get A/D filter: -9.255963e+061 result=40 08:52:52 Get A/D value=-858993460 result=40 08:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:52 Parameters OK 08:52:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:52 Set A/D data flow result=40 08:52:52 Set A/D channel type result=40 08:52:52 Set A/D encoding result=40 08:52:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:52 Set channel filter=0.000000e+000 result=40 08:52:52 Config A/D Result=40 08:52:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:52 Get A/D filter: -9.255963e+061 result=40 08:52:52 Get A/D value=-858993460 result=40 08:52:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:52 Aux= 08:52:52 Message to Camera, serial 271600 queued 08:53:29 Received message from Master: op=PointingHead serial=271613 08:53:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:53:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:53:30 Point started: ret=0 08:53:30 point_skyscan result=0 08:53:30 Check angles 08:53:30 SkyScan query 08:53:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:53:31 Message to Master queued w/err=0: serial=271613 error=0 08:53:36 Received message from Master: op=Filter serial=271614 08:53:36 Color wheel filter change from 0 to 0 08:53:36 FLIGetFilterPos err=0 currentPosition=0 08:53:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:36 Filter is already there-color wheel unchanged 08:53:36 Received message from Master: op=Shutter serial=271615 08:53:36 Shutter LASER close 08:53:36 Received message from Camera: op=State serial=271617 08:53:36 GetSingleValue result=40 Value=cccccccc 08:53:36 SkyScan query 08:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:53:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:37 Parameters OK 08:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:37 Set A/D data flow result=40 08:53:37 Set A/D channel type result=40 08:53:37 Set A/D encoding result=40 08:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:37 Set channel filter=0.000000e+000 result=40 08:53:37 Config A/D Result=40 08:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:37 Get A/D filter: -9.255963e+061 result=40 08:53:37 Get A/D value=-858993460 result=40 08:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:37 Parameters OK 08:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:37 Set A/D data flow result=40 08:53:37 Set A/D channel type result=40 08:53:37 Set A/D encoding result=40 08:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:37 Set channel filter=0.000000e+000 result=40 08:53:37 Config A/D Result=40 08:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:37 Get A/D filter: -9.255963e+061 result=40 08:53:37 Get A/D value=-858993460 result=40 08:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:37 Aux= 08:53:37 Message to Camera, serial 271617 queued 08:54:14 Received message from Master: op=PointingHead serial=271630 08:54:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 08:54:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 08:54:14 Point started: ret=0 08:54:14 point_skyscan result=0 08:54:15 Check angles 08:54:15 SkyScan query 08:54:15 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 08:54:15 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 08:54:15 Check angles 08:54:15 SkyScan query 08:54:16 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-14 08:54:16] 08:54:16 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 08:54:16 Check angles 08:54:16 SkyScan query 08:54:17 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 08:54:17 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 08:54:17 Check angles 08:54:17 SkyScan query 08:54:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 08:54:17 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 08:54:17 Message to Master queued w/err=0: serial=271630 error=0 08:54:22 Received message from Master: op=Filter serial=271631 08:54:22 Color wheel filter change from 0 to 0 08:54:22 FLIGetFilterPos err=0 currentPosition=0 08:54:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:22 Filter is already there-color wheel unchanged 08:54:23 Received message from Master: op=Shutter serial=271632 08:54:23 Shutter LASER close 08:54:23 Received message from Camera: op=State serial=271634 08:54:23 GetSingleValue result=40 Value=cccccccc 08:54:23 SkyScan query 08:54:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 08:54:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:23 Parameters OK 08:54:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:23 Set A/D data flow result=40 08:54:23 Set A/D channel type result=40 08:54:23 Set A/D encoding result=40 08:54:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:23 Set channel filter=0.000000e+000 result=40 08:54:23 Config A/D Result=40 08:54:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:23 Get A/D filter: -9.255963e+061 result=40 08:54:23 Get A/D value=-858993460 result=40 08:54:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:23 Parameters OK 08:54:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:23 Set A/D data flow result=40 08:54:23 Set A/D channel type result=40 08:54:23 Set A/D encoding result=40 08:54:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:23 Set channel filter=0.000000e+000 result=40 08:54:23 Config A/D Result=40 08:54:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:23 Get A/D filter: -9.255963e+061 result=40 08:54:23 Get A/D value=-858993460 result=40 08:54:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:23 Aux= 08:54:23 Message to Camera, serial 271634 queued 08:55:00 Received message from Master: op=PointingHead serial=271647 08:55:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:55:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:55:00 Point started: ret=0 08:55:00 point_skyscan result=0 08:55:01 Check angles 08:55:01 SkyScan query 08:55:02 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 08:55:02 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 08:55:02 Check angles 08:55:02 SkyScan query 08:55:03 SkyScan query done: ret=0 az=135.27<-9018 ze=6.495<-11567 Statuses=0009 0008 08:55:03 Msec=750 True Az=135.27 Ze=6.495 Az status=0009 Ze status=0008 08:55:03 Check angles 08:55:03 SkyScan query 08:55:03 SkyScan query done: ret=0 az=117.48<-7832 ze=6.495<-11567 Statuses=0009 0008 08:55:03 Msec=1500 True Az=117.48 Ze=6.495 Az status=0009 Ze status=0008 08:55:03 Check angles 08:55:03 SkyScan query 08:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:55:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:55:04 Message to Master queued w/err=0: serial=271647 error=0 08:55:09 Received message from Master: op=Filter serial=271648 08:55:09 Color wheel filter change from 0 to 0 08:55:09 FLIGetFilterPos err=0 currentPosition=0 08:55:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:09 Filter is already there-color wheel unchanged 08:55:09 Received message from Master: op=Shutter serial=271649 08:55:09 Shutter LASER close 08:55:09 Received message from Camera: op=State serial=271651 08:55:09 GetSingleValue result=40 Value=cccccccc 08:55:09 SkyScan query 08:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:55:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:10 Parameters OK 08:55:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:10 Set A/D data flow result=40 08:55:10 Set A/D channel type result=40 08:55:10 Set A/D encoding result=40 08:55:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:10 Set channel filter=0.000000e+000 result=40 08:55:10 Config A/D Result=40 08:55:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:10 Get A/D filter: -9.255963e+061 result=40 08:55:10 Get A/D value=-858993460 result=40 08:55:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:10 Parameters OK 08:55:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:10 Set A/D data flow result=40 08:55:10 Set A/D channel type result=40 08:55:10 Set A/D encoding result=40 08:55:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:10 Set channel filter=0.000000e+000 result=40 08:55:10 Config A/D Result=40 08:55:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:10 Get A/D filter: -9.255963e+061 result=40 08:55:10 Get A/D value=-858993460 result=40 08:55:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:10 Aux= 08:55:10 Message to Camera, serial 271651 queued 08:55:47 Received message from Master: op=PointingHead serial=271664 08:55:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:55:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:55:47 Point started: ret=0 08:55:47 point_skyscan result=0 08:55:48 Check angles 08:55:48 SkyScan query 08:55:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 08:55:48 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 08:55:49 Check angles 08:55:49 SkyScan query 08:55:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 08:55:49 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 08:55:49 Check angles 08:55:49 SkyScan query 08:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 08:55:50 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 08:55:50 Check angles 08:55:50 SkyScan query 08:55:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 08:55:51 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 08:55:51 Check angles 08:55:51 SkyScan query 08:55:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.82<-19188 Statuses=0008 0009 08:55:51 Msec=3000 True Az=112.995 Ze=-107.82 Az status=0008 Ze status=0009 08:55:52 Check angles 08:55:52 SkyScan query 08:55:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 08:55:52 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 08:55:52 Check angles 08:55:52 SkyScan query 08:55:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 08:55:53 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 08:55:53 Check angles 08:55:53 SkyScan query 08:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.64<-23376 Statuses=0008 0009 08:55:54 Msec=5250 True Az=112.995 Ze=-170.64 Az status=0008 Ze status=0009 08:55:54 Check angles 08:55:54 SkyScan query 08:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:55:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:55:54 Message to Master queued w/err=0: serial=271664 error=0 08:55:59 Received message from Master: op=Filter serial=271665 08:55:59 Color wheel filter change from 0 to 0 08:55:59 FLIGetFilterPos err=0 currentPosition=0 08:55:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:59 Filter is already there-color wheel unchanged 08:56:00 Received message from Master: op=Shutter serial=271666 08:56:00 Shutter LASER open 08:56:00 Received message from Camera: op=State serial=271668 08:56:00 GetSingleValue result=40 Value=cccccccc 08:56:00 SkyScan query 08:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:56:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:00 Parameters OK 08:56:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:00 Set A/D data flow result=40 08:56:00 Set A/D channel type result=40 08:56:00 Set A/D encoding result=40 08:56:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:00 Set channel filter=0.000000e+000 result=40 08:56:00 Config A/D Result=40 08:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:00 Get A/D filter: -9.255963e+061 result=40 08:56:00 Get A/D value=-858993460 result=40 08:56:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:00 Parameters OK 08:56:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:00 Set A/D data flow result=40 08:56:00 Set A/D channel type result=40 08:56:00 Set A/D encoding result=40 08:56:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:00 Set channel filter=0.000000e+000 result=40 08:56:00 Config A/D Result=40 08:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:00 Get A/D filter: -9.255963e+061 result=40 08:56:00 Get A/D value=-858993460 result=40 08:56:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:00 Aux= 08:56:00 Message to Camera, serial 271668 queued 08:56:09 Received message from Master: op=Shutter serial=271678 08:56:09 Shutter LASER close 08:56:09 Received message from Master: op=PointingHead serial=271682 08:56:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:10 Point started: ret=0 08:56:10 point_skyscan result=0 08:56:10 Check angles 08:56:10 SkyScan query 08:56:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 08:56:11 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 08:56:11 Check angles 08:56:11 SkyScan query 08:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 08:56:12 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 08:56:12 Check angles 08:56:12 SkyScan query 08:56:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 08:56:12 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 08:56:13 Check angles 08:56:13 SkyScan query 08:56:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 08:56:13 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 08:56:13 Check angles 08:56:13 SkyScan query 08:56:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 08:56:14 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 08:56:14 Check angles 08:56:14 SkyScan query 08:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 08:56:15 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 08:56:15 Check angles 08:56:15 SkyScan query 08:56:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.245<-13083 Statuses=0008 0009 08:56:15 Msec=4500 True Az=112.995 Ze=-16.245 Az status=0008 Ze status=0009 08:56:16 Check angles 08:56:16 SkyScan query 08:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.56<-11696 Statuses=0008 0009 08:56:16 Msec=5250 True Az=112.995 Ze=4.56 Az status=0008 Ze status=0009 08:56:16 Check angles 08:56:16 SkyScan query 08:56:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:56:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:56:17 Message to Master queued w/err=0: serial=271682 error=0 08:56:22 Received message from Master: op=Filter serial=271683 08:56:22 Color wheel filter change from 0 to 0 08:56:22 FLIGetFilterPos err=0 currentPosition=0 08:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:22 Filter is already there-color wheel unchanged 08:56:22 Received message from Master: op=Shutter serial=271684 08:56:22 Shutter LASER close 08:56:22 Received message from Camera: op=State serial=271686 08:56:22 GetSingleValue result=40 Value=cccccccc 08:56:22 SkyScan query 08:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:23 Parameters OK 08:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:23 Set A/D data flow result=40 08:56:23 Set A/D channel type result=40 08:56:23 Set A/D encoding result=40 08:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:23 Set channel filter=0.000000e+000 result=40 08:56:23 Config A/D Result=40 08:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:23 Get A/D filter: -9.255963e+061 result=40 08:56:23 Get A/D value=-858993460 result=40 08:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:23 Parameters OK 08:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:23 Set A/D data flow result=40 08:56:23 Set A/D channel type result=40 08:56:23 Set A/D encoding result=40 08:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:23 Set channel filter=0.000000e+000 result=40 08:56:23 Config A/D Result=40 08:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:23 Get A/D filter: -9.255963e+061 result=40 08:56:23 Get A/D value=-858993460 result=40 08:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:23 Aux= 08:56:23 Message to Camera, serial 271686 queued 08:56:59 Received message from Master: op=PointingHead serial=271698 08:56:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:56:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:56:59 Point started: ret=0 08:56:59 point_skyscan result=0 08:57:00 Check angles 08:57:00 SkyScan query 08:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:57:00 Message to Master queued w/err=0: serial=271698 error=0 08:57:05 Received message from Master: op=Filter serial=271699 08:57:05 Color wheel filter change from 0 to 0 08:57:05 FLIGetFilterPos err=0 currentPosition=0 08:57:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:05 Filter is already there-color wheel unchanged 08:57:06 Received message from Master: op=Shutter serial=271700 08:57:06 Shutter LASER close 08:57:06 Received message from Camera: op=State serial=271702 08:57:06 GetSingleValue result=40 Value=cccccccc 08:57:06 SkyScan query 08:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:06 Parameters OK 08:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:06 Set A/D data flow result=40 08:57:06 Set A/D channel type result=40 08:57:06 Set A/D encoding result=40 08:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:06 Set channel filter=0.000000e+000 result=40 08:57:06 Config A/D Result=40 08:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:06 Get A/D filter: -9.255963e+061 result=40 08:57:06 Get A/D value=-858993460 result=40 08:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:06 Parameters OK 08:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:06 Set A/D data flow result=40 08:57:06 Set A/D channel type result=40 08:57:06 Set A/D encoding result=40 08:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:06 Set channel filter=0.000000e+000 result=40 08:57:06 Config A/D Result=40 08:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:06 Get A/D filter: -9.255963e+061 result=40 08:57:06 Get A/D value=-858993460 result=40 08:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:06 Aux= 08:57:06 Message to Camera, serial 271702 queued 08:57:43 Received message from Master: op=PointingHead serial=271715 08:57:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:57:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:57:43 Point started: ret=0 08:57:43 point_skyscan result=0 08:57:44 Check angles 08:57:44 SkyScan query 08:57:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:57:45 Message to Master queued w/err=0: serial=271715 error=0 08:57:50 Received message from Master: op=Filter serial=271716 08:57:50 Color wheel filter change from 0 to 0 08:57:50 FLIGetFilterPos err=0 currentPosition=0 08:57:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:50 Filter is already there-color wheel unchanged 08:57:50 Received message from Master: op=Shutter serial=271717 08:57:50 Shutter LASER close 08:57:50 Received message from Camera: op=State serial=271719 08:57:50 GetSingleValue result=40 Value=cccccccc 08:57:50 SkyScan query 08:57:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:50 Parameters OK 08:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:50 Set A/D data flow result=40 08:57:50 Set A/D channel type result=40 08:57:50 Set A/D encoding result=40 08:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:50 Set channel filter=0.000000e+000 result=40 08:57:50 Config A/D Result=40 08:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:50 Get A/D filter: -9.255963e+061 result=40 08:57:50 Get A/D value=-858993460 result=40 08:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:50 Parameters OK 08:57:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:50 Set A/D data flow result=40 08:57:50 Set A/D channel type result=40 08:57:50 Set A/D encoding result=40 08:57:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:50 Set channel filter=0.000000e+000 result=40 08:57:50 Config A/D Result=40 08:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:50 Get A/D filter: -9.255963e+061 result=40 08:57:50 Get A/D value=-858993460 result=40 08:57:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:50 Aux= 08:57:50 Message to Camera, serial 271719 queued 08:58:27 Received message from Master: op=PointingHead serial=271732 08:58:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:58:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:58:28 Point started: ret=0 08:58:28 point_skyscan result=0 08:58:28 Check angles 08:58:28 SkyScan query 08:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 08:58:29 Message to Master queued w/err=0: serial=271732 error=0 08:58:34 Received message from Master: op=Filter serial=271733 08:58:34 Color wheel filter change from 0 to 0 08:58:34 FLIGetFilterPos err=0 currentPosition=0 08:58:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:34 Filter is already there-color wheel unchanged 08:58:34 Received message from Master: op=Shutter serial=271734 08:58:34 Shutter LASER close 08:58:34 Received message from Camera: op=State serial=271736 08:58:34 GetSingleValue result=40 Value=cccccccc 08:58:34 SkyScan query 08:58:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:58:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:35 Parameters OK 08:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:35 Set A/D data flow result=40 08:58:35 Set A/D channel type result=40 08:58:35 Set A/D encoding result=40 08:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:35 Set channel filter=0.000000e+000 result=40 08:58:35 Config A/D Result=40 08:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:35 Get A/D filter: -9.255963e+061 result=40 08:58:35 Get A/D value=-858993460 result=40 08:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:35 Parameters OK 08:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:35 Set A/D data flow result=40 08:58:35 Set A/D channel type result=40 08:58:35 Set A/D encoding result=40 08:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:35 Set channel filter=0.000000e+000 result=40 08:58:35 Config A/D Result=40 08:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:35 Get A/D filter: -9.255963e+061 result=40 08:58:35 Get A/D value=-858993460 result=40 08:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:35 Aux= 08:58:35 Message to Camera, serial 271736 queued 08:59:12 Received message from Master: op=PointingHead serial=271749 08:59:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:59:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:59:12 Point started: ret=0 08:59:12 point_skyscan result=0 08:59:13 Check angles 08:59:13 SkyScan query 08:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 08:59:13 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 08:59:13 Check angles 08:59:13 SkyScan query 08:59:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 08:59:14 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 08:59:14 Check angles 08:59:14 SkyScan query 08:59:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 08:59:15 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 08:59:15 Check angles 08:59:15 SkyScan query 08:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 08:59:16 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 08:59:16 Check angles 08:59:16 SkyScan query 08:59:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 08:59:16 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 08:59:16 Check angles 08:59:16 SkyScan query 08:59:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.67<-20578 Statuses=0008 0009 08:59:17 Msec=3750 True Az=112.995 Ze=-128.67 Az status=0008 Ze status=0009 08:59:17 Check angles 08:59:17 SkyScan query 08:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.67<-21978 Statuses=0008 0009 08:59:18 Msec=4500 True Az=112.995 Ze=-149.67 Az status=0008 Ze status=0009 08:59:18 Check angles 08:59:18 SkyScan query 08:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.925<-23395 Statuses=0008 0009 08:59:19 Msec=5250 True Az=112.995 Ze=-170.925 Az status=0008 Ze status=0009 08:59:19 Check angles 08:59:19 SkyScan query 08:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:59:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:59:19 Message to Master queued w/err=0: serial=271749 error=0 08:59:24 Received message from Master: op=Filter serial=271750 08:59:24 Color wheel filter change from 0 to 0 08:59:24 FLIGetFilterPos err=0 currentPosition=0 08:59:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:24 Filter is already there-color wheel unchanged 08:59:24 Received message from Master: op=Shutter serial=271751 08:59:24 Shutter LASER open 08:59:25 Received message from Camera: op=State serial=271753 08:59:25 GetSingleValue result=40 Value=cccccccc 08:59:25 SkyScan query 08:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:59:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:25 Parameters OK 08:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:25 Set A/D data flow result=40 08:59:25 Set A/D channel type result=40 08:59:25 Set A/D encoding result=40 08:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:25 Set channel filter=0.000000e+000 result=40 08:59:25 Config A/D Result=40 08:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:25 Get A/D filter: -9.255963e+061 result=40 08:59:25 Get A/D value=-858993460 result=40 08:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:25 Parameters OK 08:59:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:25 Set A/D data flow result=40 08:59:25 Set A/D channel type result=40 08:59:25 Set A/D encoding result=40 08:59:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:25 Set channel filter=0.000000e+000 result=40 08:59:25 Config A/D Result=40 08:59:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:25 Get A/D filter: -9.255963e+061 result=40 08:59:25 Get A/D value=-858993460 result=40 08:59:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:25 Aux= 08:59:25 Message to Camera, serial 271753 queued 08:59:34 Received message from Master: op=Shutter serial=271763 08:59:34 Shutter LASER close 08:59:34 Received message from Master: op=PointingHead serial=271767 08:59:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 08:59:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 08:59:35 Point started: ret=0 08:59:35 point_skyscan result=0 08:59:35 Check angles 08:59:35 SkyScan query 08:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 08:59:36 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 08:59:36 Check angles 08:59:36 SkyScan query 08:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 08:59:37 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 08:59:37 Check angles 08:59:37 SkyScan query 08:59:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.86<-18724 Statuses=0008 0009 08:59:37 Msec=1500 True Az=112.995 Ze=-100.86 Az status=0008 Ze status=0009 08:59:38 Check angles 08:59:38 SkyScan query 08:59:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.95<-17330 Statuses=0008 0009 08:59:38 Msec=2250 True Az=112.995 Ze=-79.95 Az status=0008 Ze status=0009 08:59:38 Check angles 08:59:38 SkyScan query 08:59:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 08:59:39 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 08:59:39 Check angles 08:59:39 SkyScan query 08:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 08:59:40 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 08:59:40 Check angles 08:59:40 SkyScan query 08:59:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 08:59:40 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 08:59:41 Check angles 08:59:41 SkyScan query 08:59:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.26<-11716 Statuses=0008 0009 08:59:41 Msec=5250 True Az=112.995 Ze=4.26 Az status=0008 Ze status=0009 08:59:41 Check angles 08:59:41 SkyScan query 08:59:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 08:59:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 08:59:42 Message to Master queued w/err=0: serial=271767 error=0 08:59:47 Received message from Master: op=Filter serial=271768 08:59:47 Color wheel filter change from 0 to 0 08:59:47 FLIGetFilterPos err=0 currentPosition=0 08:59:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:47 Filter is already there-color wheel unchanged 08:59:47 Received message from Master: op=Shutter serial=271769 08:59:47 Shutter LASER close 08:59:47 Received message from Camera: op=State serial=271771 08:59:47 GetSingleValue result=40 Value=cccccccc 08:59:47 SkyScan query 08:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 08:59:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:48 Parameters OK 08:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:48 Set A/D data flow result=40 08:59:48 Set A/D channel type result=40 08:59:48 Set A/D encoding result=40 08:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:48 Set channel filter=0.000000e+000 result=40 08:59:48 Config A/D Result=40 08:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:48 Get A/D filter: -9.255963e+061 result=40 08:59:48 Get A/D value=-858993460 result=40 08:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:48 Parameters OK 08:59:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:48 Set A/D data flow result=40 08:59:48 Set A/D channel type result=40 08:59:48 Set A/D encoding result=40 08:59:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:48 Set channel filter=0.000000e+000 result=40 08:59:48 Config A/D Result=40 08:59:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:48 Get A/D filter: -9.255963e+061 result=40 08:59:48 Get A/D value=-858993460 result=40 08:59:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:48 Aux= 08:59:48 Message to Camera, serial 271771 queued 09:00:25 Received message from Master: op=PointingHead serial=271784 09:00:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:00:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:00:25 Point started: ret=0 09:00:25 point_skyscan result=0 09:00:26 Check angles 09:00:26 SkyScan query 09:00:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:00:26 Message to Master queued w/err=0: serial=271784 error=0 09:00:31 Received message from Master: op=Filter serial=271785 09:00:31 Color wheel filter change from 0 to 0 09:00:31 FLIGetFilterPos err=0 currentPosition=0 09:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:31 Filter is already there-color wheel unchanged 09:00:32 Received message from Master: op=Shutter serial=271786 09:00:32 Shutter LASER close 09:00:32 Received message from Camera: op=State serial=271788 09:00:32 GetSingleValue result=40 Value=cccccccc 09:00:32 SkyScan query 09:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:00:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:32 Parameters OK 09:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:32 Set A/D data flow result=40 09:00:32 Set A/D channel type result=40 09:00:32 Set A/D encoding result=40 09:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:32 Set channel filter=0.000000e+000 result=40 09:00:32 Config A/D Result=40 09:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:32 Get A/D filter: -9.255963e+061 result=40 09:00:32 Get A/D value=-858993460 result=40 09:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:32 Parameters OK 09:00:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:32 Set A/D data flow result=40 09:00:32 Set A/D channel type result=40 09:00:32 Set A/D encoding result=40 09:00:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:32 Set channel filter=0.000000e+000 result=40 09:00:32 Config A/D Result=40 09:00:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:32 Get A/D filter: -9.255963e+061 result=40 09:00:32 Get A/D value=-858993460 result=40 09:00:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:32 Aux= 09:00:32 Message to Camera, serial 271788 queued 09:01:09 Received message from Master: op=PointingHead serial=271801 09:01:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:01:09 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:01:09 Point started: ret=0 09:01:09 point_skyscan result=0 09:01:10 Check angles 09:01:10 SkyScan query 09:01:11 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 09:01:11 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 09:01:11 Check angles 09:01:11 SkyScan query 09:01:11 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 09:01:11 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 09:01:12 Check angles 09:01:12 SkyScan query 09:01:12 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 09:01:12 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 09:01:12 Check angles 09:01:12 SkyScan query 09:01:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:01:13 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:01:13 Message to Master queued w/err=0: serial=271801 error=0 09:01:18 Received message from Master: op=Filter serial=271802 09:01:18 Color wheel filter change from 0 to 0 09:01:18 FLIGetFilterPos err=0 currentPosition=0 09:01:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:18 Filter is already there-color wheel unchanged 09:01:18 Received message from Master: op=Shutter serial=271803 09:01:18 Shutter LASER close 09:01:18 Received message from Camera: op=State serial=271805 09:01:18 GetSingleValue result=40 Value=cccccccc 09:01:18 SkyScan query 09:01:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:01:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:19 Parameters OK 09:01:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:19 Set A/D data flow result=40 09:01:19 Set A/D channel type result=40 09:01:19 Set A/D encoding result=40 09:01:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:19 Set channel filter=0.000000e+000 result=40 09:01:19 Config A/D Result=40 09:01:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:19 Get A/D filter: -9.255963e+061 result=40 09:01:19 Get A/D value=-858993460 result=40 09:01:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:19 Parameters OK 09:01:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:19 Set A/D data flow result=40 09:01:19 Set A/D channel type result=40 09:01:19 Set A/D encoding result=40 09:01:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:19 Set channel filter=0.000000e+000 result=40 09:01:19 Config A/D Result=40 09:01:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:19 Get A/D filter: -9.255963e+061 result=40 09:01:19 Get A/D value=-858993460 result=40 09:01:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:19 Aux= 09:01:19 Message to Camera, serial 271805 queued 09:01:56 Received message from Master: op=PointingHead serial=271818 09:01:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:01:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:01:56 Point started: ret=0 09:01:56 point_skyscan result=0 09:01:57 Check angles 09:01:57 SkyScan query 09:01:57 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 09:01:57 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 09:01:57 Check angles 09:01:57 SkyScan query 09:01:58 SkyScan query done: ret=0 az=135.06<-9004 ze=6.495<-11567 Statuses=0009 0008 09:01:58 Msec=750 True Az=135.06 Ze=6.495 Az status=0009 Ze status=0008 09:01:58 Check angles 09:01:58 SkyScan query 09:01:59 SkyScan query done: ret=0 az=117.525<-7835 ze=6.495<-11567 Statuses=0009 0008 09:01:59 Msec=1500 True Az=117.525 Ze=6.495 Az status=0009 Ze status=0008 09:01:59 Check angles 09:01:59 SkyScan query 09:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:02:00 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:02:00 Message to Master queued w/err=0: serial=271818 error=0 09:02:05 Received message from Master: op=Filter serial=271819 09:02:05 Color wheel filter change from 0 to 0 09:02:05 FLIGetFilterPos err=0 currentPosition=0 09:02:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:05 Filter is already there-color wheel unchanged 09:02:05 Received message from Master: op=Shutter serial=271820 09:02:05 Shutter LASER close 09:02:05 Received message from Camera: op=State serial=271822 09:02:05 GetSingleValue result=40 Value=cccccccc 09:02:05 SkyScan query 09:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:02:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:05 Parameters OK 09:02:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:05 Set A/D data flow result=40 09:02:05 Set A/D channel type result=40 09:02:05 Set A/D encoding result=40 09:02:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:05 Set channel filter=0.000000e+000 result=40 09:02:05 Config A/D Result=40 09:02:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:05 Get A/D filter: -9.255963e+061 result=40 09:02:05 Get A/D value=-858993460 result=40 09:02:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:05 Parameters OK 09:02:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:05 Set A/D data flow result=40 09:02:05 Set A/D channel type result=40 09:02:05 Set A/D encoding result=40 09:02:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:05 Set channel filter=0.000000e+000 result=40 09:02:05 Config A/D Result=40 09:02:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:05 Get A/D filter: -9.255963e+061 result=40 09:02:05 Get A/D value=-858993460 result=40 09:02:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:05 Aux= 09:02:05 Message to Camera, serial 271822 queued 09:02:42 Received message from Master: op=PointingHead serial=271835 09:02:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:02:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:02:42 Point started: ret=0 09:02:42 point_skyscan result=0 09:02:43 Check angles 09:02:43 SkyScan query 09:02:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 09:02:44 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 09:02:44 Check angles 09:02:44 SkyScan query 09:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.04<-14936 Statuses=0008 0009 09:02:45 Msec=750 True Az=112.995 Ze=-44.04 Az status=0008 Ze status=0009 09:02:45 Check angles 09:02:45 SkyScan query 09:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 09:02:45 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 09:02:46 Check angles 09:02:46 SkyScan query 09:02:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 09:02:46 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 09:02:46 Check angles 09:02:46 SkyScan query 09:02:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.745<-19183 Statuses=0008 0009 09:02:47 Msec=3000 True Az=112.995 Ze=-107.745 Az status=0008 Ze status=0009 09:02:47 Check angles 09:02:47 SkyScan query 09:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 09:02:48 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 09:02:48 Check angles 09:02:48 SkyScan query 09:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.655<-21977 Statuses=0008 0009 09:02:48 Msec=4500 True Az=112.995 Ze=-149.655 Az status=0008 Ze status=0009 09:02:49 Check angles 09:02:49 SkyScan query 09:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.58<-23372 Statuses=0008 0009 09:02:49 Msec=5250 True Az=112.995 Ze=-170.58 Az status=0008 Ze status=0009 09:02:49 Check angles 09:02:49 SkyScan query 09:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:02:50 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:02:50 Message to Master queued w/err=0: serial=271835 error=0 09:02:55 Received message from Master: op=Filter serial=271836 09:02:55 Color wheel filter change from 0 to 0 09:02:55 FLIGetFilterPos err=0 currentPosition=0 09:02:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:55 Filter is already there-color wheel unchanged 09:02:55 Received message from Master: op=Shutter serial=271837 09:02:55 Shutter LASER open 09:02:55 Received message from Camera: op=State serial=271839 09:02:55 GetSingleValue result=40 Value=cccccccc 09:02:55 SkyScan query 09:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:02:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:56 Parameters OK 09:02:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:56 Set A/D data flow result=40 09:02:56 Set A/D channel type result=40 09:02:56 Set A/D encoding result=40 09:02:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:56 Set channel filter=0.000000e+000 result=40 09:02:56 Config A/D Result=40 09:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:56 Get A/D filter: -9.255963e+061 result=40 09:02:56 Get A/D value=-858993460 result=40 09:02:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:56 Parameters OK 09:02:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:56 Set A/D data flow result=40 09:02:56 Set A/D channel type result=40 09:02:56 Set A/D encoding result=40 09:02:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:56 Set channel filter=0.000000e+000 result=40 09:02:56 Config A/D Result=40 09:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:56 Get A/D filter: -9.255963e+061 result=40 09:02:56 Get A/D value=-858993460 result=40 09:02:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:56 Aux= 09:02:56 Message to Camera, serial 271839 queued 09:03:04 Received message from Master: op=Shutter serial=271849 09:03:04 Shutter LASER close 09:03:05 Received message from Master: op=PointingHead serial=271853 09:03:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:03:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:03:05 Point started: ret=0 09:03:05 point_skyscan result=0 09:03:06 Check angles 09:03:06 SkyScan query 09:03:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 09:03:06 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 09:03:06 Check angles 09:03:06 SkyScan query 09:03:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 09:03:07 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 09:03:07 Check angles 09:03:07 SkyScan query 09:03:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 09:03:08 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 09:03:08 Check angles 09:03:08 SkyScan query 09:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 09:03:09 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 09:03:09 Check angles 09:03:09 SkyScan query 09:03:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 09:03:09 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 09:03:10 Check angles 09:03:10 SkyScan query 09:03:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 09:03:10 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 09:03:10 Check angles 09:03:10 SkyScan query 09:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 09:03:11 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 09:03:11 Check angles 09:03:11 SkyScan query 09:03:12 SkyScan query done: ret=0 az=113.01<-7534 ze=4.335<-11711 Statuses=0008 0009 09:03:12 Msec=5250 True Az=113.01 Ze=4.335 Az status=0008 Ze status=0009 09:03:12 Check angles 09:03:12 SkyScan query 09:03:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:03:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:03:12 Message to Master queued w/err=0: serial=271853 error=0 09:03:17 Received message from Master: op=Filter serial=271854 09:03:17 Color wheel filter change from 0 to 0 09:03:17 FLIGetFilterPos err=0 currentPosition=0 09:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:17 Filter is already there-color wheel unchanged 09:03:18 Received message from Master: op=Shutter serial=271855 09:03:18 Shutter LASER close 09:03:18 Received message from Camera: op=State serial=271857 09:03:18 GetSingleValue result=40 Value=cccccccc 09:03:18 SkyScan query 09:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:18 Parameters OK 09:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:18 Set A/D data flow result=40 09:03:18 Set A/D channel type result=40 09:03:18 Set A/D encoding result=40 09:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:18 Set channel filter=0.000000e+000 result=40 09:03:18 Config A/D Result=40 09:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:18 Get A/D filter: -9.255963e+061 result=40 09:03:18 Get A/D value=-858993460 result=40 09:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:18 Parameters OK 09:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:18 Set A/D data flow result=40 09:03:18 Set A/D channel type result=40 09:03:18 Set A/D encoding result=40 09:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:18 Set channel filter=0.000000e+000 result=40 09:03:18 Config A/D Result=40 09:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:18 Get A/D filter: -9.255963e+061 result=40 09:03:18 Get A/D value=-858993460 result=40 09:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:18 Aux= 09:03:18 Message to Camera, serial 271857 queued 09:03:35 Received message from Master: op=Identify serial=271858 [UTC 2019-3-14 09:03:48] 09:03:55 Received message from Master: op=PointingHead serial=271873 09:03:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:03:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:03:55 Point started: ret=0 09:03:55 point_skyscan result=0 09:03:56 Check angles 09:03:56 SkyScan query 09:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:03:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:03:57 Message to Master queued w/err=0: serial=271873 error=0 09:04:02 Received message from Master: op=Filter serial=271874 09:04:02 Color wheel filter change from 0 to 0 09:04:02 FLIGetFilterPos err=0 currentPosition=0 09:04:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:02 Filter is already there-color wheel unchanged 09:04:02 Received message from Master: op=Shutter serial=271875 09:04:02 Shutter LASER close 09:04:02 Received message from Camera: op=State serial=271877 09:04:02 GetSingleValue result=40 Value=cccccccc 09:04:02 SkyScan query 09:04:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:03 Parameters OK 09:04:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:03 Set A/D data flow result=40 09:04:03 Set A/D channel type result=40 09:04:03 Set A/D encoding result=40 09:04:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:03 Set channel filter=0.000000e+000 result=40 09:04:03 Config A/D Result=40 09:04:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:03 Get A/D filter: -9.255963e+061 result=40 09:04:03 Get A/D value=-858993460 result=40 09:04:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:03 Parameters OK 09:04:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:03 Set A/D data flow result=40 09:04:03 Set A/D channel type result=40 09:04:03 Set A/D encoding result=40 09:04:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:03 Set channel filter=0.000000e+000 result=40 09:04:03 Config A/D Result=40 09:04:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:03 Get A/D filter: -9.255963e+061 result=40 09:04:03 Get A/D value=-858993460 result=40 09:04:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:03 Aux= 09:04:03 Message to Camera, serial 271877 queued 09:04:39 Received message from Master: op=PointingHead serial=271890 09:04:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:04:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:04:40 Point started: ret=0 09:04:40 point_skyscan result=0 09:04:41 Check angles 09:04:41 SkyScan query 09:04:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:04:41 Message to Master queued w/err=0: serial=271890 error=0 09:04:46 Received message from Master: op=Filter serial=271891 09:04:46 Color wheel filter change from 0 to 0 09:04:46 FLIGetFilterPos err=0 currentPosition=0 09:04:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:46 Filter is already there-color wheel unchanged 09:04:46 Received message from Master: op=Shutter serial=271892 09:04:46 Shutter LASER close 09:04:46 Received message from Camera: op=State serial=271894 09:04:46 GetSingleValue result=40 Value=cccccccc 09:04:46 SkyScan query 09:04:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:04:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:47 Parameters OK 09:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:47 Set A/D data flow result=40 09:04:47 Set A/D channel type result=40 09:04:47 Set A/D encoding result=40 09:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:47 Set channel filter=0.000000e+000 result=40 09:04:47 Config A/D Result=40 09:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:47 Get A/D filter: -9.255963e+061 result=40 09:04:47 Get A/D value=-858993460 result=40 09:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:47 Parameters OK 09:04:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:47 Set A/D data flow result=40 09:04:47 Set A/D channel type result=40 09:04:47 Set A/D encoding result=40 09:04:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:47 Set channel filter=0.000000e+000 result=40 09:04:47 Config A/D Result=40 09:04:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:47 Get A/D filter: -9.255963e+061 result=40 09:04:47 Get A/D value=-858993460 result=40 09:04:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:47 Aux= 09:04:47 Message to Camera, serial 271894 queued 09:05:24 Received message from Master: op=PointingHead serial=271907 09:05:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:05:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:05:24 Point started: ret=0 09:05:24 point_skyscan result=0 09:05:25 Check angles 09:05:25 SkyScan query 09:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:05:25 Message to Master queued w/err=0: serial=271907 error=0 09:05:30 Received message from Master: op=Filter serial=271908 09:05:30 Color wheel filter change from 0 to 0 09:05:30 FLIGetFilterPos err=0 currentPosition=0 09:05:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:30 Filter is already there-color wheel unchanged 09:05:31 Received message from Master: op=Shutter serial=271909 09:05:31 Shutter LASER close 09:05:31 Received message from Camera: op=State serial=271911 09:05:31 GetSingleValue result=40 Value=cccccccc 09:05:31 SkyScan query 09:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:31 Parameters OK 09:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:31 Set A/D data flow result=40 09:05:31 Set A/D channel type result=40 09:05:31 Set A/D encoding result=40 09:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:31 Set channel filter=0.000000e+000 result=40 09:05:31 Config A/D Result=40 09:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:31 Get A/D filter: -9.255963e+061 result=40 09:05:31 Get A/D value=-858993460 result=40 09:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:31 Parameters OK 09:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:31 Set A/D data flow result=40 09:05:31 Set A/D channel type result=40 09:05:31 Set A/D encoding result=40 09:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:31 Set channel filter=0.000000e+000 result=40 09:05:31 Config A/D Result=40 09:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:31 Get A/D filter: -9.255963e+061 result=40 09:05:31 Get A/D value=-858993460 result=40 09:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:31 Aux= 09:05:31 Message to Camera, serial 271911 queued 09:06:08 Received message from Master: op=PointingHead serial=271924 09:06:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:06:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:06:08 Point started: ret=0 09:06:08 point_skyscan result=0 09:06:09 Check angles 09:06:09 SkyScan query 09:06:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 09:06:10 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 09:06:10 Check angles 09:06:10 SkyScan query 09:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.865<-14991 Statuses=0008 0009 09:06:11 Msec=750 True Az=112.995 Ze=-44.865 Az status=0008 Ze status=0009 09:06:11 Check angles 09:06:11 SkyScan query 09:06:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 09:06:11 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 09:06:11 Check angles 09:06:11 SkyScan query 09:06:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 09:06:12 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 09:06:12 Check angles 09:06:12 SkyScan query 09:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 09:06:13 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 09:06:13 Check angles 09:06:13 SkyScan query 09:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 09:06:14 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 09:06:14 Check angles 09:06:14 SkyScan query 09:06:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 09:06:14 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 09:06:14 Check angles 09:06:14 SkyScan query 09:06:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.595<-23373 Statuses=0008 0009 09:06:15 Msec=5250 True Az=112.995 Ze=-170.595 Az status=0008 Ze status=0009 09:06:15 Check angles 09:06:15 SkyScan query 09:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:06:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:06:16 Message to Master queued w/err=0: serial=271924 error=0 09:06:21 Received message from Master: op=Filter serial=271925 09:06:21 Color wheel filter change from 0 to 0 09:06:21 FLIGetFilterPos err=0 currentPosition=0 09:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:21 Filter is already there-color wheel unchanged 09:06:21 Received message from Master: op=Shutter serial=271926 09:06:21 Shutter LASER open 09:06:21 Received message from Camera: op=State serial=271928 09:06:21 GetSingleValue result=40 Value=cccccccc 09:06:21 SkyScan query 09:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:06:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:22 Parameters OK 09:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:22 Set A/D data flow result=40 09:06:22 Set A/D channel type result=40 09:06:22 Set A/D encoding result=40 09:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:22 Set channel filter=0.000000e+000 result=40 09:06:22 Config A/D Result=40 09:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:22 Get A/D filter: -9.255963e+061 result=40 09:06:22 Get A/D value=-858993460 result=40 09:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:22 Parameters OK 09:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:22 Set A/D data flow result=40 09:06:22 Set A/D channel type result=40 09:06:22 Set A/D encoding result=40 09:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:22 Set channel filter=0.000000e+000 result=40 09:06:22 Config A/D Result=40 09:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:22 Get A/D filter: -9.255963e+061 result=40 09:06:22 Get A/D value=-858993460 result=40 09:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:22 Aux= 09:06:22 Message to Camera, serial 271928 queued 09:06:30 Received message from Master: op=Shutter serial=271938 09:06:30 Shutter LASER close 09:06:31 Received message from Master: op=PointingHead serial=271942 09:06:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:06:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:06:31 Point started: ret=0 09:06:31 point_skyscan result=0 09:06:32 Check angles 09:06:32 SkyScan query 09:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 09:06:32 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 09:06:33 Check angles 09:06:33 SkyScan query 09:06:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.13<-20142 Statuses=0008 0009 09:06:33 Msec=750 True Az=112.995 Ze=-122.13 Az status=0008 Ze status=0009 09:06:33 Check angles 09:06:33 SkyScan query 09:06:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 09:06:34 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 09:06:34 Check angles 09:06:34 SkyScan query 09:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 09:06:35 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 09:06:35 Check angles 09:06:35 SkyScan query 09:06:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.71<-15914 Statuses=0008 0009 09:06:35 Msec=3000 True Az=112.995 Ze=-58.71 Az status=0008 Ze status=0009 09:06:36 Check angles 09:06:36 SkyScan query 09:06:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 09:06:36 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 09:06:36 Check angles 09:06:36 SkyScan query 09:06:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.875<-13125 Statuses=0008 0009 09:06:37 Msec=4500 True Az=112.995 Ze=-16.875 Az status=0008 Ze status=0009 09:06:37 Check angles 09:06:37 SkyScan query 09:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.38<-11708 Statuses=0008 0009 09:06:38 Msec=5250 True Az=112.995 Ze=4.38 Az status=0008 Ze status=0009 09:06:38 Check angles 09:06:38 SkyScan query 09:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:06:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:06:38 Message to Master queued w/err=0: serial=271942 error=0 09:06:43 Received message from Master: op=Filter serial=271943 09:06:43 Color wheel filter change from 0 to 0 09:06:43 FLIGetFilterPos err=0 currentPosition=0 09:06:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:43 Filter is already there-color wheel unchanged 09:06:44 Received message from Master: op=Shutter serial=271944 09:06:44 Shutter LASER close 09:06:44 Received message from Camera: op=State serial=271946 09:06:44 GetSingleValue result=40 Value=cccccccc 09:06:44 SkyScan query 09:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:44 Parameters OK 09:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:44 Set A/D data flow result=40 09:06:44 Set A/D channel type result=40 09:06:44 Set A/D encoding result=40 09:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:44 Set channel filter=0.000000e+000 result=40 09:06:44 Config A/D Result=40 09:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:44 Get A/D filter: -9.255963e+061 result=40 09:06:44 Get A/D value=-858993460 result=40 09:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:44 Parameters OK 09:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:44 Set A/D data flow result=40 09:06:44 Set A/D channel type result=40 09:06:44 Set A/D encoding result=40 09:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:44 Set channel filter=0.000000e+000 result=40 09:06:44 Config A/D Result=40 09:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:44 Get A/D filter: -9.255963e+061 result=40 09:06:44 Get A/D value=-858993460 result=40 09:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:44 Aux= 09:06:44 Message to Camera, serial 271946 queued 09:07:20 Received message from Master: op=PointingHead serial=271958 09:07:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:07:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:07:21 Point started: ret=0 09:07:21 point_skyscan result=0 09:07:21 Check angles 09:07:21 SkyScan query 09:07:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:07:22 Message to Master queued w/err=0: serial=271958 error=0 09:07:27 Received message from Master: op=Filter serial=271959 09:07:27 Color wheel filter change from 0 to 0 09:07:27 FLIGetFilterPos err=0 currentPosition=0 09:07:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:27 Filter is already there-color wheel unchanged 09:07:27 Received message from Master: op=Shutter serial=271960 09:07:27 Shutter LASER close 09:07:27 Received message from Camera: op=State serial=271962 09:07:27 GetSingleValue result=40 Value=cccccccc 09:07:27 SkyScan query 09:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:07:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:28 Parameters OK 09:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:28 Set A/D data flow result=40 09:07:28 Set A/D channel type result=40 09:07:28 Set A/D encoding result=40 09:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:28 Set channel filter=0.000000e+000 result=40 09:07:28 Config A/D Result=40 09:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:28 Get A/D filter: -9.255963e+061 result=40 09:07:28 Get A/D value=-858993460 result=40 09:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:28 Parameters OK 09:07:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:28 Set A/D data flow result=40 09:07:28 Set A/D channel type result=40 09:07:28 Set A/D encoding result=40 09:07:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:28 Set channel filter=0.000000e+000 result=40 09:07:28 Config A/D Result=40 09:07:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:28 Get A/D filter: -9.255963e+061 result=40 09:07:28 Get A/D value=-858993460 result=40 09:07:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:28 Aux= 09:07:28 Message to Camera, serial 271962 queued 09:08:05 Received message from Master: op=PointingHead serial=271975 09:08:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:08:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:08:05 Point started: ret=0 09:08:05 point_skyscan result=0 09:08:06 Check angles 09:08:06 SkyScan query 09:08:06 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 09:08:06 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 09:08:06 Check angles 09:08:06 SkyScan query 09:08:07 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 09:08:07 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 09:08:07 Check angles 09:08:07 SkyScan query 09:08:08 SkyScan query done: ret=0 az=171.375<-11425 ze=-6.495<-12433 Statuses=0009 0008 09:08:08 Msec=1500 True Az=171.375 Ze=-6.495 Az status=0009 Ze status=0008 09:08:08 Check angles 09:08:08 SkyScan query 09:08:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:08:09 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:08:09 Message to Master queued w/err=0: serial=271975 error=0 09:08:14 Received message from Master: op=Filter serial=271976 09:08:14 Color wheel filter change from 0 to 0 09:08:14 FLIGetFilterPos err=0 currentPosition=0 09:08:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:14 Filter is already there-color wheel unchanged 09:08:14 Received message from Master: op=Shutter serial=271977 09:08:14 Shutter LASER close 09:08:14 Received message from Camera: op=State serial=271979 09:08:14 GetSingleValue result=40 Value=cccccccc 09:08:14 SkyScan query 09:08:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:08:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:14 Parameters OK 09:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:14 Set A/D data flow result=40 09:08:14 Set A/D channel type result=40 09:08:14 Set A/D encoding result=40 09:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:14 Set channel filter=0.000000e+000 result=40 09:08:14 Config A/D Result=40 09:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:14 Get A/D filter: -9.255963e+061 result=40 09:08:14 Get A/D value=-858993460 result=40 09:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:14 Parameters OK 09:08:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:14 Set A/D data flow result=40 09:08:14 Set A/D channel type result=40 09:08:14 Set A/D encoding result=40 09:08:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:14 Set channel filter=0.000000e+000 result=40 09:08:14 Config A/D Result=40 09:08:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:14 Get A/D filter: -9.255963e+061 result=40 09:08:14 Get A/D value=-858993460 result=40 09:08:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:14 Aux= 09:08:14 Message to Camera, serial 271979 queued 09:08:51 Received message from Master: op=PointingHead serial=271992 09:08:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:08:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:08:52 Point started: ret=0 09:08:52 point_skyscan result=0 09:08:52 Check angles 09:08:52 SkyScan query 09:08:53 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 09:08:53 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 09:08:53 Check angles 09:08:53 SkyScan query 09:08:54 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 09:08:54 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 09:08:54 Check angles 09:08:54 SkyScan query 09:08:54 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 09:08:54 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 09:08:55 Check angles 09:08:55 SkyScan query 09:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:08:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:08:55 Message to Master queued w/err=0: serial=271992 error=0 09:09:00 Received message from Master: op=Filter serial=271993 09:09:00 Color wheel filter change from 0 to 0 09:09:00 FLIGetFilterPos err=0 currentPosition=0 09:09:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:00 Filter is already there-color wheel unchanged 09:09:00 Received message from Master: op=Shutter serial=271994 09:09:00 Shutter LASER close 09:09:00 Received message from Camera: op=State serial=271996 09:09:00 GetSingleValue result=40 Value=cccccccc 09:09:00 SkyScan query 09:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:09:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:01 Parameters OK 09:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:01 Set A/D data flow result=40 09:09:01 Set A/D channel type result=40 09:09:01 Set A/D encoding result=40 09:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:01 Set channel filter=0.000000e+000 result=40 09:09:01 Config A/D Result=40 09:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:01 Get A/D filter: -9.255963e+061 result=40 09:09:01 Get A/D value=-858993460 result=40 09:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:01 Parameters OK 09:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:01 Set A/D data flow result=40 09:09:01 Set A/D channel type result=40 09:09:01 Set A/D encoding result=40 09:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:01 Set channel filter=0.000000e+000 result=40 09:09:01 Config A/D Result=40 09:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:01 Get A/D filter: -9.255963e+061 result=40 09:09:01 Get A/D value=-858993460 result=40 09:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:01 Aux= 09:09:01 Message to Camera, serial 271996 queued 09:09:38 Received message from Master: op=PointingHead serial=272009 09:09:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:38 Point started: ret=0 09:09:38 point_skyscan result=0 09:09:39 Check angles 09:09:39 SkyScan query 09:09:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 09:09:39 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 09:09:40 Check angles 09:09:40 SkyScan query 09:09:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 09:09:40 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 09:09:40 Check angles 09:09:40 SkyScan query 09:09:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.06<-16404 Statuses=0008 0009 09:09:41 Msec=1500 True Az=112.995 Ze=-66.06 Az status=0008 Ze status=0009 09:09:41 Check angles 09:09:41 SkyScan query 09:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.465<-17831 Statuses=0008 0009 09:09:42 Msec=2250 True Az=112.995 Ze=-87.465 Az status=0008 Ze status=0009 09:09:42 Check angles 09:09:42 SkyScan query 09:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.405<-19227 Statuses=0008 0009 09:09:42 Msec=3000 True Az=112.995 Ze=-108.405 Az status=0008 Ze status=0009 09:09:43 Check angles 09:09:43 SkyScan query 09:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.36<-20624 Statuses=0008 0009 09:09:43 Msec=3750 True Az=112.995 Ze=-129.36 Az status=0008 Ze status=0009 09:09:43 Check angles 09:09:43 SkyScan query 09:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 09:09:44 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 09:09:44 Check angles 09:09:44 SkyScan query 09:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.09<-23406 Statuses=0008 0009 09:09:45 Msec=5250 True Az=112.995 Ze=-171.09 Az status=0008 Ze status=0009 09:09:45 Check angles 09:09:45 SkyScan query 09:09:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:09:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:09:45 Message to Master queued w/err=0: serial=272009 error=0 09:09:50 Received message from Master: op=Filter serial=272010 09:09:50 Color wheel filter change from 0 to 0 09:09:50 FLIGetFilterPos err=0 currentPosition=0 09:09:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:50 Filter is already there-color wheel unchanged 09:09:51 Received message from Master: op=Shutter serial=272011 09:09:51 Shutter LASER open 09:09:51 Received message from Camera: op=State serial=272013 09:09:51 GetSingleValue result=40 Value=cccccccc 09:09:51 SkyScan query 09:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:09:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:51 Parameters OK 09:09:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:51 Set A/D data flow result=40 09:09:51 Set A/D channel type result=40 09:09:51 Set A/D encoding result=40 09:09:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:51 Set channel filter=0.000000e+000 result=40 09:09:51 Config A/D Result=40 09:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:51 Get A/D filter: -9.255963e+061 result=40 09:09:51 Get A/D value=-858993460 result=40 09:09:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:51 Parameters OK 09:09:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:51 Set A/D data flow result=40 09:09:51 Set A/D channel type result=40 09:09:51 Set A/D encoding result=40 09:09:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:51 Set channel filter=0.000000e+000 result=40 09:09:51 Config A/D Result=40 09:09:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:51 Get A/D filter: -9.255963e+061 result=40 09:09:51 Get A/D value=-858993460 result=40 09:09:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:51 Aux= 09:09:51 Message to Camera, serial 272013 queued 09:10:00 Received message from Master: op=Shutter serial=272023 09:10:00 Shutter LASER close 09:10:00 Received message from Master: op=PointingHead serial=272027 09:10:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:01 Point started: ret=0 09:10:01 point_skyscan result=0 09:10:01 Check angles 09:10:01 SkyScan query 09:10:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 09:10:02 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 09:10:02 Check angles 09:10:02 SkyScan query 09:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 09:10:03 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 09:10:03 Check angles 09:10:03 SkyScan query 09:10:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 09:10:03 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 09:10:04 Check angles 09:10:04 SkyScan query 09:10:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.5<-17300 Statuses=0008 0009 09:10:04 Msec=2250 True Az=112.995 Ze=-79.5 Az status=0008 Ze status=0009 09:10:04 Check angles 09:10:04 SkyScan query 09:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 09:10:05 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 09:10:05 Check angles 09:10:05 SkyScan query 09:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 09:10:06 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 09:10:06 Check angles 09:10:06 SkyScan query 09:10:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 09:10:06 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 09:10:07 Check angles 09:10:07 SkyScan query 09:10:07 SkyScan query done: ret=0 az=113.01<-7534 ze=4.245<-11717 Statuses=0008 0009 09:10:07 Msec=5250 True Az=113.01 Ze=4.245 Az status=0008 Ze status=0009 09:10:07 Check angles 09:10:07 SkyScan query 09:10:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:10:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:10:08 Message to Master queued w/err=0: serial=272027 error=0 09:10:13 Received message from Master: op=Filter serial=272028 09:10:13 Color wheel filter change from 0 to 0 09:10:13 FLIGetFilterPos err=0 currentPosition=0 09:10:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:13 Filter is already there-color wheel unchanged 09:10:13 Received message from Master: op=Shutter serial=272029 09:10:13 Shutter LASER close 09:10:13 Received message from Camera: op=State serial=272031 09:10:13 GetSingleValue result=40 Value=cccccccc 09:10:13 SkyScan query 09:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:14 Parameters OK 09:10:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:14 Set A/D data flow result=40 09:10:14 Set A/D channel type result=40 09:10:14 Set A/D encoding result=40 09:10:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:14 Set channel filter=0.000000e+000 result=40 09:10:14 Config A/D Result=40 09:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:14 Get A/D filter: -9.255963e+061 result=40 09:10:14 Get A/D value=-858993460 result=40 09:10:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:14 Parameters OK 09:10:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:14 Set A/D data flow result=40 09:10:14 Set A/D channel type result=40 09:10:14 Set A/D encoding result=40 09:10:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:14 Set channel filter=0.000000e+000 result=40 09:10:14 Config A/D Result=40 09:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:14 Get A/D filter: -9.255963e+061 result=40 09:10:14 Get A/D value=-858993460 result=40 09:10:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:14 Aux= 09:10:14 Message to Camera, serial 272031 queued 09:10:50 Received message from Master: op=PointingHead serial=272043 09:10:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:10:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:10:50 Point started: ret=0 09:10:50 point_skyscan result=0 09:10:51 Check angles 09:10:51 SkyScan query 09:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:10:51 Message to Master queued w/err=0: serial=272043 error=0 09:10:56 Received message from Master: op=Filter serial=272044 09:10:56 Color wheel filter change from 0 to 0 09:10:56 FLIGetFilterPos err=0 currentPosition=0 09:10:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:56 Filter is already there-color wheel unchanged 09:10:57 Received message from Master: op=Shutter serial=272045 09:10:57 Shutter LASER close 09:10:57 Received message from Camera: op=State serial=272047 09:10:57 GetSingleValue result=40 Value=cccccccc 09:10:57 SkyScan query 09:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:10:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:57 Parameters OK 09:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:57 Set A/D data flow result=40 09:10:57 Set A/D channel type result=40 09:10:57 Set A/D encoding result=40 09:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:57 Set channel filter=0.000000e+000 result=40 09:10:57 Config A/D Result=40 09:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:57 Get A/D filter: -9.255963e+061 result=40 09:10:57 Get A/D value=-858993460 result=40 09:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:57 Parameters OK 09:10:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:57 Set A/D data flow result=40 09:10:57 Set A/D channel type result=40 09:10:57 Set A/D encoding result=40 09:10:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:57 Set channel filter=0.000000e+000 result=40 09:10:57 Config A/D Result=40 09:10:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:57 Get A/D filter: -9.255963e+061 result=40 09:10:57 Get A/D value=-858993460 result=40 09:10:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:57 Aux= 09:10:57 Message to Camera, serial 272047 queued 09:11:34 Received message from Master: op=PointingHead serial=272060 09:11:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:11:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:11:34 Point started: ret=0 09:11:34 point_skyscan result=0 09:11:35 Check angles 09:11:35 SkyScan query 09:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:11:36 Message to Master queued w/err=0: serial=272060 error=0 09:11:41 Received message from Master: op=Filter serial=272061 09:11:41 Color wheel filter change from 0 to 0 09:11:41 FLIGetFilterPos err=0 currentPosition=0 09:11:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:41 Filter is already there-color wheel unchanged 09:11:41 Received message from Master: op=Shutter serial=272062 09:11:41 Shutter LASER close 09:11:41 Received message from Camera: op=State serial=272064 09:11:41 GetSingleValue result=40 Value=cccccccc 09:11:41 SkyScan query 09:11:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:11:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:42 Parameters OK 09:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:42 Set A/D data flow result=40 09:11:42 Set A/D channel type result=40 09:11:42 Set A/D encoding result=40 09:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:42 Set channel filter=0.000000e+000 result=40 09:11:42 Config A/D Result=40 09:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:42 Get A/D filter: -9.255963e+061 result=40 09:11:42 Get A/D value=-858993460 result=40 09:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:42 Parameters OK 09:11:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:42 Set A/D data flow result=40 09:11:42 Set A/D channel type result=40 09:11:42 Set A/D encoding result=40 09:11:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:42 Set channel filter=0.000000e+000 result=40 09:11:42 Config A/D Result=40 09:11:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:42 Get A/D filter: -9.255963e+061 result=40 09:11:42 Get A/D value=-858993460 result=40 09:11:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:42 Aux= 09:11:42 Message to Camera, serial 272064 queued 09:12:18 Received message from Master: op=PointingHead serial=272077 09:12:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:12:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:12:19 Point started: ret=0 09:12:19 point_skyscan result=0 09:12:20 Check angles 09:12:20 SkyScan query 09:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:12:20 Message to Master queued w/err=0: serial=272077 error=0 09:12:25 Received message from Master: op=Filter serial=272078 09:12:25 Color wheel filter change from 0 to 0 09:12:25 FLIGetFilterPos err=0 currentPosition=0 09:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:25 Filter is already there-color wheel unchanged 09:12:25 Received message from Master: op=Shutter serial=272079 09:12:25 Shutter LASER close 09:12:25 Received message from Camera: op=State serial=272081 09:12:25 GetSingleValue result=40 Value=cccccccc 09:12:25 SkyScan query 09:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:26 Parameters OK 09:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:26 Set A/D data flow result=40 09:12:26 Set A/D channel type result=40 09:12:26 Set A/D encoding result=40 09:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:26 Set channel filter=0.000000e+000 result=40 09:12:26 Config A/D Result=40 09:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:26 Get A/D filter: -9.255963e+061 result=40 09:12:26 Get A/D value=-858993460 result=40 09:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:26 Parameters OK 09:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:26 Set A/D data flow result=40 09:12:26 Set A/D channel type result=40 09:12:26 Set A/D encoding result=40 09:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:26 Set channel filter=0.000000e+000 result=40 09:12:26 Config A/D Result=40 09:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:26 Get A/D filter: -9.255963e+061 result=40 09:12:26 Get A/D value=-858993460 result=40 09:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:26 Aux= 09:12:26 Message to Camera, serial 272081 queued 09:13:03 Received message from Master: op=PointingHead serial=272094 09:13:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:13:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:13:03 Point started: ret=0 09:13:03 point_skyscan result=0 09:13:04 Check angles 09:13:04 SkyScan query 09:13:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 09:13:04 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 09:13:05 Check angles 09:13:05 SkyScan query 09:13:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 09:13:05 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 09:13:05 Check angles 09:13:05 SkyScan query 09:13:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.01<-16334 Statuses=0008 0009 09:13:06 Msec=1500 True Az=112.995 Ze=-65.01 Az status=0008 Ze status=0009 09:13:06 Check angles 09:13:06 SkyScan query 09:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 09:13:07 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 09:13:07 Check angles 09:13:07 SkyScan query 09:13:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.805<-19187 Statuses=0008 0009 09:13:07 Msec=3000 True Az=112.995 Ze=-107.805 Az status=0008 Ze status=0009 09:13:08 Check angles 09:13:08 SkyScan query 09:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 09:13:08 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 09:13:08 Check angles 09:13:08 SkyScan query 09:13:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 09:13:09 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 09:13:09 Check angles 09:13:09 SkyScan query 09:13:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 09:13:10 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 09:13:10 Check angles 09:13:10 SkyScan query 09:13:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:13:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:13:10 Message to Master queued w/err=0: serial=272094 error=0 09:13:15 Received message from Master: op=Filter serial=272095 09:13:15 Color wheel filter change from 0 to 0 09:13:15 FLIGetFilterPos err=0 currentPosition=0 09:13:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:15 Filter is already there-color wheel unchanged 09:13:16 Received message from Master: op=Shutter serial=272096 09:13:16 Shutter LASER open 09:13:16 Received message from Camera: op=State serial=272098 09:13:16 GetSingleValue result=40 Value=cccccccc 09:13:16 SkyScan query 09:13:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:13:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:16 Parameters OK 09:13:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:16 Set A/D data flow result=40 09:13:16 Set A/D channel type result=40 09:13:16 Set A/D encoding result=40 09:13:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:16 Set channel filter=0.000000e+000 result=40 09:13:16 Config A/D Result=40 09:13:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:16 Get A/D filter: -9.255963e+061 result=40 09:13:16 Get A/D value=-858993460 result=40 09:13:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:16 Parameters OK 09:13:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:16 Set A/D data flow result=40 09:13:16 Set A/D channel type result=40 09:13:16 Set A/D encoding result=40 09:13:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:16 Set channel filter=0.000000e+000 result=40 09:13:16 Config A/D Result=40 09:13:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:16 Get A/D filter: -9.255963e+061 result=40 09:13:16 Get A/D value=-858993460 result=40 09:13:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:16 Aux= 09:13:16 Message to Camera, serial 272098 queued 09:13:25 Received message from Master: op=Shutter serial=272108 09:13:25 Shutter LASER close 09:13:25 Received message from Master: op=PointingHead serial=272112 09:13:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:13:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:13:26 Point started: ret=0 09:13:26 point_skyscan result=0 09:13:26 Check angles 09:13:26 SkyScan query 09:13:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 09:13:27 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 09:13:27 Check angles 09:13:27 SkyScan query 09:13:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.86<-20124 Statuses=0008 0009 09:13:28 Msec=750 True Az=112.995 Ze=-121.86 Az status=0008 Ze status=0009 09:13:28 Check angles 09:13:28 SkyScan query 09:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.47<-18698 Statuses=0008 0009 09:13:29 Msec=1500 True Az=112.995 Ze=-100.47 Az status=0008 Ze status=0009 09:13:29 Check angles 09:13:29 SkyScan query 09:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.515<-17301 Statuses=0008 0009 09:13:29 Msec=2250 True Az=112.995 Ze=-79.515 Az status=0008 Ze status=0009 09:13:30 Check angles 09:13:30 SkyScan query 09:13:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 09:13:30 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 09:13:30 Check angles 09:13:30 SkyScan query 09:13:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 09:13:31 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 09:13:31 Check angles 09:13:31 SkyScan query 09:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 09:13:32 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 09:13:32 Check angles 09:13:32 SkyScan query 09:13:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 09:13:32 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 09:13:33 Check angles 09:13:33 SkyScan query 09:13:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:13:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:13:33 Message to Master queued w/err=0: serial=272112 error=0 09:13:38 Received message from Master: op=Filter serial=272113 09:13:38 Color wheel filter change from 0 to 0 09:13:38 FLIGetFilterPos err=0 currentPosition=0 09:13:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:38 Filter is already there-color wheel unchanged 09:13:38 Received message from Master: op=Shutter serial=272114 09:13:38 Shutter LASER close 09:13:38 Received message from Camera: op=State serial=272116 09:13:38 GetSingleValue result=40 Value=cccccccc 09:13:38 SkyScan query 09:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:39 Parameters OK 09:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:39 Set A/D data flow result=40 09:13:39 Set A/D channel type result=40 09:13:39 Set A/D encoding result=40 09:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:39 Set channel filter=0.000000e+000 result=40 09:13:39 Config A/D Result=40 09:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:39 Get A/D filter: -9.255963e+061 result=40 09:13:39 Get A/D value=-858993460 result=40 09:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:39 Parameters OK 09:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:39 Set A/D data flow result=40 09:13:39 Set A/D channel type result=40 09:13:39 Set A/D encoding result=40 09:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:39 Set channel filter=0.000000e+000 result=40 09:13:39 Config A/D Result=40 09:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:39 Get A/D filter: -9.255963e+061 result=40 09:13:39 Get A/D value=-858993460 result=40 09:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:39 Aux= 09:13:39 Message to Camera, serial 272116 queued 09:14:16 Received message from Master: op=PointingHead serial=272129 09:14:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:14:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:14:16 Point started: ret=0 09:14:16 point_skyscan result=0 09:14:17 Check angles 09:14:17 SkyScan query 09:14:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:14:17 Message to Master queued w/err=0: serial=272129 error=0 09:14:22 Received message from Master: op=Filter serial=272130 09:14:22 Color wheel filter change from 0 to 0 [UTC 2019-3-14 09:14:22] 09:14:22 FLIGetFilterPos err=0 currentPosition=0 09:14:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:23 Filter is already there-color wheel unchanged 09:14:23 Received message from Master: op=Shutter serial=272131 09:14:23 Shutter LASER close 09:14:23 Received message from Camera: op=State serial=272133 09:14:23 GetSingleValue result=40 Value=cccccccc 09:14:23 SkyScan query 09:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:14:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:23 Parameters OK 09:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:23 Set A/D data flow result=40 09:14:23 Set A/D channel type result=40 09:14:23 Set A/D encoding result=40 09:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:23 Set channel filter=0.000000e+000 result=40 09:14:23 Config A/D Result=40 09:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:23 Get A/D filter: -9.255963e+061 result=40 09:14:23 Get A/D value=-858993460 result=40 09:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:23 Parameters OK 09:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:23 Set A/D data flow result=40 09:14:23 Set A/D channel type result=40 09:14:23 Set A/D encoding result=40 09:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:23 Set channel filter=0.000000e+000 result=40 09:14:23 Config A/D Result=40 09:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:23 Get A/D filter: -9.255963e+061 result=40 09:14:23 Get A/D value=-858993460 result=40 09:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:23 Aux= 09:14:23 Message to Camera, serial 272133 queued 09:15:00 Received message from Master: op=PointingHead serial=272146 09:15:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:15:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:15:01 Point started: ret=0 09:15:01 point_skyscan result=0 09:15:01 Check angles 09:15:01 SkyScan query 09:15:02 SkyScan query done: ret=0 az=135.78<-9052 ze=-6.51<-12434 Statuses=0009 0008 09:15:02 Msec=0 True Az=135.78 Ze=-6.51 Az status=0009 Ze status=0008 09:15:02 Check angles 09:15:02 SkyScan query 09:15:03 SkyScan query done: ret=0 az=153.57<-10238 ze=-6.495<-12433 Statuses=0009 0008 09:15:03 Msec=750 True Az=153.57 Ze=-6.495 Az status=0009 Ze status=0008 09:15:03 Check angles 09:15:03 SkyScan query 09:15:03 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 09:15:03 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 09:15:04 Check angles 09:15:04 SkyScan query 09:15:04 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:15:04 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:15:04 Message to Master queued w/err=0: serial=272146 error=0 09:15:09 Received message from Master: op=Filter serial=272147 09:15:09 Color wheel filter change from 0 to 0 09:15:09 FLIGetFilterPos err=0 currentPosition=0 09:15:09 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:09 Filter is already there-color wheel unchanged 09:15:09 Received message from Master: op=Shutter serial=272148 09:15:09 Shutter LASER close 09:15:09 Received message from Camera: op=State serial=272150 09:15:09 GetSingleValue result=40 Value=cccccccc 09:15:09 SkyScan query 09:15:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:15:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:10 Parameters OK 09:15:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:10 Set A/D data flow result=40 09:15:10 Set A/D channel type result=40 09:15:10 Set A/D encoding result=40 09:15:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:10 Set channel filter=0.000000e+000 result=40 09:15:10 Config A/D Result=40 09:15:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:10 Get A/D filter: -9.255963e+061 result=40 09:15:10 Get A/D value=-858993460 result=40 09:15:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:10 Parameters OK 09:15:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:10 Set A/D data flow result=40 09:15:10 Set A/D channel type result=40 09:15:10 Set A/D encoding result=40 09:15:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:10 Set channel filter=0.000000e+000 result=40 09:15:10 Config A/D Result=40 09:15:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:10 Get A/D filter: -9.255963e+061 result=40 09:15:10 Get A/D value=-858993460 result=40 09:15:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:10 Aux= 09:15:10 Message to Camera, serial 272150 queued 09:15:47 Received message from Master: op=PointingHead serial=272163 09:15:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:15:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:15:47 Point started: ret=0 09:15:47 point_skyscan result=0 09:15:48 Check angles 09:15:48 SkyScan query 09:15:48 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 09:15:48 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 09:15:49 Check angles 09:15:49 SkyScan query 09:15:49 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 09:15:49 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 09:15:49 Check angles 09:15:49 SkyScan query 09:15:50 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 09:15:50 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 09:15:50 Check angles 09:15:50 SkyScan query 09:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:15:51 Message to Master queued w/err=0: serial=272163 error=0 09:15:56 Received message from Master: op=Filter serial=272164 09:15:56 Color wheel filter change from 0 to 0 09:15:56 FLIGetFilterPos err=0 currentPosition=0 09:15:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:56 Filter is already there-color wheel unchanged 09:15:56 Received message from Master: op=Shutter serial=272165 09:15:56 Shutter LASER close 09:15:56 Received message from Camera: op=State serial=272167 09:15:56 GetSingleValue result=40 Value=cccccccc 09:15:56 SkyScan query 09:15:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:15:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:57 Parameters OK 09:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:57 Set A/D data flow result=40 09:15:57 Set A/D channel type result=40 09:15:57 Set A/D encoding result=40 09:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:57 Set channel filter=0.000000e+000 result=40 09:15:57 Config A/D Result=40 09:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:57 Get A/D filter: -9.255963e+061 result=40 09:15:57 Get A/D value=-858993460 result=40 09:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:57 Parameters OK 09:15:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:57 Set A/D data flow result=40 09:15:57 Set A/D channel type result=40 09:15:57 Set A/D encoding result=40 09:15:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:57 Set channel filter=0.000000e+000 result=40 09:15:57 Config A/D Result=40 09:15:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:57 Get A/D filter: -9.255963e+061 result=40 09:15:57 Get A/D value=-858993460 result=40 09:15:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:57 Aux= 09:15:57 Message to Camera, serial 272167 queued 09:16:33 Received message from Master: op=PointingHead serial=272180 09:16:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:16:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:16:34 Point started: ret=0 09:16:34 point_skyscan result=0 09:16:34 Check angles 09:16:34 SkyScan query 09:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 09:16:35 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 09:16:35 Check angles 09:16:35 SkyScan query 09:16:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 09:16:36 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 09:16:36 Check angles 09:16:36 SkyScan query 09:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.67<-16378 Statuses=0008 0009 09:16:37 Msec=1500 True Az=112.995 Ze=-65.67 Az status=0008 Ze status=0009 09:16:37 Check angles 09:16:37 SkyScan query 09:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.625<-17775 Statuses=0008 0009 09:16:37 Msec=2250 True Az=112.995 Ze=-86.625 Az status=0008 Ze status=0009 09:16:37 Check angles 09:16:37 SkyScan query 09:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 09:16:38 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 09:16:38 Check angles 09:16:38 SkyScan query 09:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.535<-20569 Statuses=0008 0009 09:16:39 Msec=3750 True Az=112.995 Ze=-128.535 Az status=0008 Ze status=0009 09:16:39 Check angles 09:16:39 SkyScan query 09:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.535<-21969 Statuses=0008 0009 09:16:40 Msec=4500 True Az=112.995 Ze=-149.535 Az status=0008 Ze status=0009 09:16:40 Check angles 09:16:40 SkyScan query 09:16:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.46<-23364 Statuses=0008 0009 09:16:40 Msec=5250 True Az=112.995 Ze=-170.46 Az status=0008 Ze status=0009 09:16:40 Check angles 09:16:40 SkyScan query 09:16:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:16:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:16:41 Message to Master queued w/err=0: serial=272180 error=0 09:16:46 Received message from Master: op=Filter serial=272181 09:16:46 Color wheel filter change from 0 to 0 09:16:46 FLIGetFilterPos err=0 currentPosition=0 09:16:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:46 Filter is already there-color wheel unchanged 09:16:46 Received message from Master: op=Shutter serial=272182 09:16:46 Shutter LASER open 09:16:46 Received message from Camera: op=State serial=272184 09:16:46 GetSingleValue result=40 Value=cccccccc 09:16:46 SkyScan query 09:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:16:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:47 Parameters OK 09:16:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:47 Set A/D data flow result=40 09:16:47 Set A/D channel type result=40 09:16:47 Set A/D encoding result=40 09:16:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:47 Set channel filter=0.000000e+000 result=40 09:16:47 Config A/D Result=40 09:16:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:47 Get A/D filter: -9.255963e+061 result=40 09:16:47 Get A/D value=-858993460 result=40 09:16:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:47 Parameters OK 09:16:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:47 Set A/D data flow result=40 09:16:47 Set A/D channel type result=40 09:16:47 Set A/D encoding result=40 09:16:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:47 Set channel filter=0.000000e+000 result=40 09:16:47 Config A/D Result=40 09:16:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:47 Get A/D filter: -9.255963e+061 result=40 09:16:47 Get A/D value=-858993460 result=40 09:16:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:47 Aux= 09:16:47 Message to Camera, serial 272184 queued 09:16:55 Received message from Master: op=Shutter serial=272194 09:16:55 Shutter LASER close 09:16:56 Received message from Master: op=PointingHead serial=272198 09:16:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:16:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:16:56 Point started: ret=0 09:16:56 point_skyscan result=0 09:16:57 Check angles 09:16:57 SkyScan query 09:16:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.43<-21562 Statuses=0008 0009 09:16:57 Msec=0 True Az=112.995 Ze=-143.43 Az status=0008 Ze status=0009 09:16:58 Check angles 09:16:58 SkyScan query 09:16:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 09:16:58 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 09:16:58 Check angles 09:16:58 SkyScan query 09:16:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 09:16:59 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 09:16:59 Check angles 09:16:59 SkyScan query 09:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 09:17:00 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 09:17:00 Check angles 09:17:00 SkyScan query 09:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 09:17:00 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 09:17:01 Check angles 09:17:01 SkyScan query 09:17:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 09:17:01 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 09:17:01 Check angles 09:17:01 SkyScan query 09:17:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.25<-13150 Statuses=0008 0009 09:17:02 Msec=4500 True Az=112.995 Ze=-17.25 Az status=0008 Ze status=0009 09:17:02 Check angles 09:17:02 SkyScan query 09:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 09:17:03 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 09:17:03 Check angles 09:17:03 SkyScan query 09:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:17:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:17:03 Message to Master queued w/err=0: serial=272198 error=0 09:17:08 Received message from Master: op=Filter serial=272199 09:17:08 Color wheel filter change from 0 to 0 09:17:08 FLIGetFilterPos err=0 currentPosition=0 09:17:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:08 Filter is already there-color wheel unchanged 09:17:09 Received message from Master: op=Shutter serial=272200 09:17:09 Shutter LASER close 09:17:09 Received message from Camera: op=State serial=272202 09:17:09 GetSingleValue result=40 Value=cccccccc 09:17:09 SkyScan query 09:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:09 Parameters OK 09:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:09 Set A/D data flow result=40 09:17:09 Set A/D channel type result=40 09:17:09 Set A/D encoding result=40 09:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:09 Set channel filter=0.000000e+000 result=40 09:17:09 Config A/D Result=40 09:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:09 Get A/D filter: -9.255963e+061 result=40 09:17:09 Get A/D value=-858993460 result=40 09:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:09 Parameters OK 09:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:09 Set A/D data flow result=40 09:17:09 Set A/D channel type result=40 09:17:09 Set A/D encoding result=40 09:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:09 Set channel filter=0.000000e+000 result=40 09:17:09 Config A/D Result=40 09:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:09 Get A/D filter: -9.255963e+061 result=40 09:17:09 Get A/D value=-858993460 result=40 09:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:09 Aux= 09:17:09 Message to Camera, serial 272202 queued 09:17:46 Received message from Master: op=PointingHead serial=272215 09:17:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:17:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:17:47 Point started: ret=0 09:17:47 point_skyscan result=0 09:17:47 Check angles 09:17:47 SkyScan query 09:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:17:48 Message to Master queued w/err=0: serial=272215 error=0 09:17:53 Received message from Master: op=Filter serial=272216 09:17:53 Color wheel filter change from 0 to 0 09:17:53 FLIGetFilterPos err=0 currentPosition=0 09:17:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:53 Filter is already there-color wheel unchanged 09:17:53 Received message from Master: op=Shutter serial=272217 09:17:53 Shutter LASER close 09:17:53 Received message from Camera: op=State serial=272219 09:17:53 GetSingleValue result=40 Value=cccccccc 09:17:53 SkyScan query 09:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:17:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:54 Parameters OK 09:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:54 Set A/D data flow result=40 09:17:54 Set A/D channel type result=40 09:17:54 Set A/D encoding result=40 09:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:54 Set channel filter=0.000000e+000 result=40 09:17:54 Config A/D Result=40 09:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:54 Get A/D filter: -9.255963e+061 result=40 09:17:54 Get A/D value=-858993460 result=40 09:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:54 Parameters OK 09:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:54 Set A/D data flow result=40 09:17:54 Set A/D channel type result=40 09:17:54 Set A/D encoding result=40 09:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:54 Set channel filter=0.000000e+000 result=40 09:17:54 Config A/D Result=40 09:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:54 Get A/D filter: -9.255963e+061 result=40 09:17:54 Get A/D value=-858993460 result=40 09:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:54 Aux= 09:17:54 Message to Camera, serial 272219 queued 09:18:31 Received message from Master: op=PointingHead serial=272232 09:18:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:18:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:18:31 Point started: ret=0 09:18:31 point_skyscan result=0 09:18:32 Check angles 09:18:32 SkyScan query 09:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:18:32 Message to Master queued w/err=0: serial=272232 error=0 09:18:37 Received message from Master: op=Filter serial=272233 09:18:37 Color wheel filter change from 0 to 0 09:18:37 FLIGetFilterPos err=0 currentPosition=0 09:18:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:37 Filter is already there-color wheel unchanged 09:18:37 Received message from Master: op=Shutter serial=272234 09:18:37 Shutter LASER close 09:18:37 Received message from Camera: op=State serial=272236 09:18:37 GetSingleValue result=40 Value=cccccccc 09:18:37 SkyScan query 09:18:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:18:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:38 Parameters OK 09:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:38 Set A/D data flow result=40 09:18:38 Set A/D channel type result=40 09:18:38 Set A/D encoding result=40 09:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:38 Set channel filter=0.000000e+000 result=40 09:18:38 Config A/D Result=40 09:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:38 Get A/D filter: -9.255963e+061 result=40 09:18:38 Get A/D value=-858993460 result=40 09:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:38 Parameters OK 09:18:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:38 Set A/D data flow result=40 09:18:38 Set A/D channel type result=40 09:18:38 Set A/D encoding result=40 09:18:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:38 Set channel filter=0.000000e+000 result=40 09:18:38 Config A/D Result=40 09:18:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:38 Get A/D filter: -9.255963e+061 result=40 09:18:38 Get A/D value=-858993460 result=40 09:18:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:38 Aux= 09:18:38 Message to Camera, serial 272236 queued 09:19:15 Received message from Master: op=PointingHead serial=272249 09:19:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:19:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:19:15 Point started: ret=0 09:19:15 point_skyscan result=0 09:19:16 Check angles 09:19:16 SkyScan query 09:19:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:19:17 Message to Master queued w/err=0: serial=272249 error=0 09:19:22 Received message from Master: op=Filter serial=272250 09:19:22 Color wheel filter change from 0 to 0 09:19:22 FLIGetFilterPos err=0 currentPosition=0 09:19:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:22 Filter is already there-color wheel unchanged 09:19:22 Received message from Master: op=Shutter serial=272251 09:19:22 Shutter LASER close 09:19:22 Received message from Camera: op=State serial=272253 09:19:22 GetSingleValue result=40 Value=cccccccc 09:19:22 SkyScan query 09:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:19:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:22 Parameters OK 09:19:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:22 Set A/D data flow result=40 09:19:22 Set A/D channel type result=40 09:19:22 Set A/D encoding result=40 09:19:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:22 Set channel filter=0.000000e+000 result=40 09:19:22 Config A/D Result=40 09:19:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:22 Get A/D filter: -9.255963e+061 result=40 09:19:22 Get A/D value=-858993460 result=40 09:19:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:22 Parameters OK 09:19:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:22 Set A/D data flow result=40 09:19:22 Set A/D channel type result=40 09:19:22 Set A/D encoding result=40 09:19:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:22 Set channel filter=0.000000e+000 result=40 09:19:22 Config A/D Result=40 09:19:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:22 Get A/D filter: -9.255963e+061 result=40 09:19:22 Get A/D value=-858993460 result=40 09:19:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:22 Aux= 09:19:22 Message to Camera, serial 272253 queued 09:19:59 Received message from Master: op=PointingHead serial=272266 09:19:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:20:00 Point started: ret=0 09:20:00 point_skyscan result=0 09:20:00 Check angles 09:20:00 SkyScan query 09:20:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.235<-13549 Statuses=0008 0009 09:20:01 Msec=0 True Az=112.995 Ze=-23.235 Az status=0008 Ze status=0009 09:20:01 Check angles 09:20:01 SkyScan query 09:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 09:20:02 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 09:20:02 Check angles 09:20:02 SkyScan query 09:20:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.13<-16342 Statuses=0008 0009 09:20:02 Msec=1500 True Az=112.995 Ze=-65.13 Az status=0008 Ze status=0009 09:20:03 Check angles 09:20:03 SkyScan query 09:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.085<-17739 Statuses=0008 0009 09:20:03 Msec=2250 True Az=112.995 Ze=-86.085 Az status=0008 Ze status=0009 09:20:03 Check angles 09:20:03 SkyScan query 09:20:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.01<-19134 Statuses=0008 0009 09:20:04 Msec=3000 True Az=112.995 Ze=-107.01 Az status=0008 Ze status=0009 09:20:04 Check angles 09:20:04 SkyScan query 09:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.965<-20531 Statuses=0008 0009 09:20:05 Msec=3750 True Az=112.995 Ze=-127.965 Az status=0008 Ze status=0009 09:20:05 Check angles 09:20:05 SkyScan query 09:20:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.95<-21930 Statuses=0008 0009 09:20:05 Msec=4500 True Az=112.995 Ze=-148.95 Az status=0008 Ze status=0009 09:20:06 Check angles 09:20:06 SkyScan query 09:20:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.89<-23326 Statuses=0008 0009 09:20:06 Msec=5250 True Az=112.995 Ze=-169.89 Az status=0008 Ze status=0009 09:20:06 Check angles 09:20:06 SkyScan query 09:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:20:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:20:07 Message to Master queued w/err=0: serial=272266 error=0 09:20:12 Received message from Master: op=Filter serial=272267 09:20:12 Color wheel filter change from 0 to 0 09:20:12 FLIGetFilterPos err=0 currentPosition=0 09:20:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:12 Filter is already there-color wheel unchanged 09:20:12 Received message from Master: op=Shutter serial=272268 09:20:12 Shutter LASER open 09:20:12 Received message from Camera: op=State serial=272270 09:20:12 GetSingleValue result=40 Value=cccccccc 09:20:12 SkyScan query 09:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:20:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:13 Parameters OK 09:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:13 Set A/D data flow result=40 09:20:13 Set A/D channel type result=40 09:20:13 Set A/D encoding result=40 09:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:13 Set channel filter=0.000000e+000 result=40 09:20:13 Config A/D Result=40 09:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:13 Get A/D filter: -9.255963e+061 result=40 09:20:13 Get A/D value=-858993460 result=40 09:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:13 Parameters OK 09:20:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:13 Set A/D data flow result=40 09:20:13 Set A/D channel type result=40 09:20:13 Set A/D encoding result=40 09:20:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:13 Set channel filter=0.000000e+000 result=40 09:20:13 Config A/D Result=40 09:20:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:13 Get A/D filter: -9.255963e+061 result=40 09:20:13 Get A/D value=-858993460 result=40 09:20:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:13 Aux= 09:20:13 Message to Camera, serial 272270 queued 09:20:21 Received message from Master: op=Shutter serial=272280 09:20:21 Shutter LASER close 09:20:22 Received message from Master: op=PointingHead serial=272284 09:20:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:20:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:20:22 Point started: ret=0 09:20:22 point_skyscan result=0 09:20:23 Check angles 09:20:23 SkyScan query 09:20:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 09:20:23 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 09:20:24 Check angles 09:20:24 SkyScan query 09:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 09:20:24 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 09:20:24 Check angles 09:20:24 SkyScan query 09:20:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 09:20:25 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 09:20:25 Check angles 09:20:25 SkyScan query 09:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 09:20:26 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 09:20:26 Check angles 09:20:26 SkyScan query 09:20:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 09:20:26 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 09:20:27 Check angles 09:20:27 SkyScan query 09:20:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 09:20:27 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 09:20:27 Check angles 09:20:27 SkyScan query 09:20:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 09:20:28 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 09:20:28 Check angles 09:20:28 SkyScan query 09:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 09:20:29 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 09:20:29 Check angles 09:20:29 SkyScan query 09:20:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:20:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:20:29 Message to Master queued w/err=0: serial=272284 error=0 09:20:34 Received message from Master: op=Filter serial=272285 09:20:34 Color wheel filter change from 0 to 0 09:20:34 FLIGetFilterPos err=0 currentPosition=0 09:20:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:34 Filter is already there-color wheel unchanged 09:20:35 Received message from Master: op=Shutter serial=272286 09:20:35 Shutter LASER close 09:20:35 Received message from Camera: op=State serial=272288 09:20:35 GetSingleValue result=40 Value=cccccccc 09:20:35 SkyScan query 09:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:20:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:35 Parameters OK 09:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:35 Set A/D data flow result=40 09:20:35 Set A/D channel type result=40 09:20:35 Set A/D encoding result=40 09:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:35 Set channel filter=0.000000e+000 result=40 09:20:35 Config A/D Result=40 09:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:35 Get A/D filter: -9.255963e+061 result=40 09:20:35 Get A/D value=-858993460 result=40 09:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:35 Parameters OK 09:20:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:35 Set A/D data flow result=40 09:20:35 Set A/D channel type result=40 09:20:35 Set A/D encoding result=40 09:20:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:35 Set channel filter=0.000000e+000 result=40 09:20:35 Config A/D Result=40 09:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:35 Get A/D filter: -9.255963e+061 result=40 09:20:35 Get A/D value=-858993460 result=40 09:20:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:35 Aux= 09:20:35 Message to Camera, serial 272288 queued 09:21:12 Received message from Master: op=PointingHead serial=272301 09:21:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:21:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:21:13 Point started: ret=0 09:21:13 point_skyscan result=0 09:21:13 Check angles 09:21:13 SkyScan query 09:21:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:21:14 Message to Master queued w/err=0: serial=272301 error=0 09:21:19 Received message from Master: op=Filter serial=272302 09:21:19 Color wheel filter change from 0 to 0 09:21:19 FLIGetFilterPos err=0 currentPosition=0 09:21:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:19 Filter is already there-color wheel unchanged 09:21:19 Received message from Master: op=Shutter serial=272303 09:21:19 Shutter LASER close 09:21:19 Received message from Camera: op=State serial=272305 09:21:19 GetSingleValue result=40 Value=cccccccc 09:21:19 SkyScan query 09:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:20 Parameters OK 09:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:20 Set A/D data flow result=40 09:21:20 Set A/D channel type result=40 09:21:20 Set A/D encoding result=40 09:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:20 Set channel filter=0.000000e+000 result=40 09:21:20 Config A/D Result=40 09:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:20 Get A/D filter: -9.255963e+061 result=40 09:21:20 Get A/D value=-858993460 result=40 09:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:20 Parameters OK 09:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:20 Set A/D data flow result=40 09:21:20 Set A/D channel type result=40 09:21:20 Set A/D encoding result=40 09:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:20 Set channel filter=0.000000e+000 result=40 09:21:20 Config A/D Result=40 09:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:20 Get A/D filter: -9.255963e+061 result=40 09:21:20 Get A/D value=-858993460 result=40 09:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:20 Aux= 09:21:20 Message to Camera, serial 272305 queued 09:21:57 Received message from Master: op=PointingHead serial=272318 09:21:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:21:57 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:21:57 Point started: ret=0 09:21:57 point_skyscan result=0 09:21:58 Check angles 09:21:58 SkyScan query 09:21:58 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 09:21:58 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 09:21:58 Check angles 09:21:58 SkyScan query 09:21:59 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.495<-12433 Statuses=0009 0008 09:21:59 Msec=750 True Az=153.27 Ze=-6.495 Az status=0009 Ze status=0008 09:21:59 Check angles 09:21:59 SkyScan query 09:22:00 SkyScan query done: ret=0 az=171.18<-11412 ze=-6.495<-12433 Statuses=0009 0008 09:22:00 Msec=1500 True Az=171.18 Ze=-6.495 Az status=0009 Ze status=0008 09:22:00 Check angles 09:22:00 SkyScan query 09:22:00 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:22:00 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:22:00 Message to Master queued w/err=0: serial=272318 error=0 09:22:05 Received message from Master: op=Filter serial=272319 09:22:05 Color wheel filter change from 0 to 0 09:22:05 FLIGetFilterPos err=0 currentPosition=0 09:22:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:05 Filter is already there-color wheel unchanged 09:22:06 Received message from Master: op=Shutter serial=272320 09:22:06 Shutter LASER close 09:22:06 Received message from Camera: op=State serial=272322 09:22:06 GetSingleValue result=40 Value=cccccccc 09:22:06 SkyScan query 09:22:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:22:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:06 Parameters OK 09:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:06 Set A/D data flow result=40 09:22:06 Set A/D channel type result=40 09:22:06 Set A/D encoding result=40 09:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:06 Set channel filter=0.000000e+000 result=40 09:22:06 Config A/D Result=40 09:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:06 Get A/D filter: -9.255963e+061 result=40 09:22:06 Get A/D value=-858993460 result=40 09:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:06 Parameters OK 09:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:06 Set A/D data flow result=40 09:22:06 Set A/D channel type result=40 09:22:06 Set A/D encoding result=40 09:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:06 Set channel filter=0.000000e+000 result=40 09:22:06 Config A/D Result=40 09:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:06 Get A/D filter: -9.255963e+061 result=40 09:22:06 Get A/D value=-858993460 result=40 09:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:06 Aux= 09:22:06 Message to Camera, serial 272322 queued 09:22:43 Received message from Master: op=PointingHead serial=272335 09:22:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:22:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:22:43 Point started: ret=0 09:22:43 point_skyscan result=0 09:22:44 Check angles 09:22:44 SkyScan query 09:22:45 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 09:22:45 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 09:22:45 Check angles 09:22:45 SkyScan query 09:22:45 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 09:22:45 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 09:22:46 Check angles 09:22:46 SkyScan query 09:22:46 SkyScan query done: ret=0 az=118.155<-7877 ze=6.495<-11567 Statuses=0009 0008 09:22:46 Msec=1500 True Az=118.155 Ze=6.495 Az status=0009 Ze status=0008 09:22:46 Check angles 09:22:46 SkyScan query 09:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:22:47 Message to Master queued w/err=0: serial=272335 error=0 09:22:52 Received message from Master: op=Filter serial=272336 09:22:52 Color wheel filter change from 0 to 0 09:22:52 FLIGetFilterPos err=0 currentPosition=0 09:22:52 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:52 Filter is already there-color wheel unchanged 09:22:52 Received message from Master: op=Shutter serial=272337 09:22:52 Shutter LASER close 09:22:52 Received message from Camera: op=State serial=272339 09:22:52 GetSingleValue result=40 Value=cccccccc 09:22:52 SkyScan query 09:22:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:22:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:53 Parameters OK 09:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:53 Set A/D data flow result=40 09:22:53 Set A/D channel type result=40 09:22:53 Set A/D encoding result=40 09:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:53 Set channel filter=0.000000e+000 result=40 09:22:53 Config A/D Result=40 09:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:53 Get A/D filter: -9.255963e+061 result=40 09:22:53 Get A/D value=-858993460 result=40 09:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:53 Parameters OK 09:22:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:53 Set A/D data flow result=40 09:22:53 Set A/D channel type result=40 09:22:53 Set A/D encoding result=40 09:22:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:53 Set channel filter=0.000000e+000 result=40 09:22:53 Config A/D Result=40 09:22:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:53 Get A/D filter: -9.255963e+061 result=40 09:22:53 Get A/D value=-858993460 result=40 09:22:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:53 Aux= 09:22:53 Message to Camera, serial 272339 queued 09:23:29 Received message from Master: op=PointingHead serial=272351 09:23:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:23:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:23:29 Point started: ret=0 09:23:29 point_skyscan result=0 09:23:30 Check angles 09:23:30 SkyScan query 09:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 09:23:30 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 09:23:31 Check angles 09:23:31 SkyScan query 09:23:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 09:23:31 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 09:23:31 Check angles 09:23:31 SkyScan query 09:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.61<-16374 Statuses=0008 0009 09:23:32 Msec=1500 True Az=112.995 Ze=-65.61 Az status=0008 Ze status=0009 09:23:32 Check angles 09:23:32 SkyScan query 09:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 09:23:33 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 09:23:33 Check angles 09:23:33 SkyScan query 09:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.55<-19170 Statuses=0008 0009 09:23:33 Msec=3000 True Az=112.995 Ze=-107.55 Az status=0008 Ze status=0009 09:23:34 Check angles 09:23:34 SkyScan query 09:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 09:23:34 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 09:23:34 Check angles 09:23:34 SkyScan query 09:23:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.49<-21966 Statuses=0008 0009 09:23:35 Msec=4500 True Az=112.995 Ze=-149.49 Az status=0008 Ze status=0009 09:23:35 Check angles 09:23:35 SkyScan query 09:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 09:23:36 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 09:23:36 Check angles 09:23:36 SkyScan query 09:23:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:23:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:23:36 Message to Master queued w/err=0: serial=272351 error=0 09:23:41 Received message from Master: op=Filter serial=272352 09:23:41 Color wheel filter change from 0 to 0 09:23:41 FLIGetFilterPos err=0 currentPosition=0 09:23:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:41 Filter is already there-color wheel unchanged 09:23:42 Received message from Master: op=Shutter serial=272353 09:23:42 Shutter LASER open 09:23:42 Received message from Camera: op=State serial=272355 09:23:42 GetSingleValue result=40 Value=cccccccc 09:23:42 SkyScan query 09:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:23:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:42 Parameters OK 09:23:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:42 Set A/D data flow result=40 09:23:42 Set A/D channel type result=40 09:23:42 Set A/D encoding result=40 09:23:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:42 Set channel filter=0.000000e+000 result=40 09:23:42 Config A/D Result=40 09:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:42 Get A/D filter: -9.255963e+061 result=40 09:23:42 Get A/D value=-858993460 result=40 09:23:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:42 Parameters OK 09:23:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:42 Set A/D data flow result=40 09:23:42 Set A/D channel type result=40 09:23:42 Set A/D encoding result=40 09:23:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:42 Set channel filter=0.000000e+000 result=40 09:23:42 Config A/D Result=40 09:23:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:42 Get A/D filter: -9.255963e+061 result=40 09:23:42 Get A/D value=-858993460 result=40 09:23:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:42 Aux= 09:23:42 Message to Camera, serial 272355 queued [UTC 2019-3-14 09:23:48] 09:23:51 Received message from Master: op=Shutter serial=272365 09:23:51 Shutter LASER close 09:23:51 Received message from Master: op=PointingHead serial=272369 09:23:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:23:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:23:51 Point started: ret=0 09:23:51 point_skyscan result=0 09:23:52 Check angles 09:23:52 SkyScan query 09:23:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 09:23:53 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 09:23:53 Check angles 09:23:53 SkyScan query 09:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 09:23:54 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 09:23:54 Check angles 09:23:54 SkyScan query 09:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.085<-18739 Statuses=0008 0009 09:23:54 Msec=1500 True Az=112.995 Ze=-101.085 Az status=0008 Ze status=0009 09:23:55 Check angles 09:23:55 SkyScan query 09:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 09:23:55 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 09:23:55 Check angles 09:23:55 SkyScan query 09:23:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 09:23:56 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 09:23:56 Check angles 09:23:56 SkyScan query 09:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 09:23:57 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 09:23:57 Check angles 09:23:57 SkyScan query 09:23:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.35<-13090 Statuses=0008 0009 09:23:57 Msec=4500 True Az=112.995 Ze=-16.35 Az status=0008 Ze status=0009 09:23:58 Check angles 09:23:58 SkyScan query 09:23:58 SkyScan query done: ret=0 az=112.995<-7533 ze=4.47<-11702 Statuses=0008 0009 09:23:58 Msec=5250 True Az=112.995 Ze=4.47 Az status=0008 Ze status=0009 09:23:58 Check angles 09:23:58 SkyScan query 09:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:23:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:23:59 Message to Master queued w/err=0: serial=272369 error=0 09:24:04 Received message from Master: op=Filter serial=272370 09:24:04 Color wheel filter change from 0 to 0 09:24:04 FLIGetFilterPos err=0 currentPosition=0 09:24:04 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:04 Filter is already there-color wheel unchanged 09:24:04 Received message from Master: op=Shutter serial=272371 09:24:04 Shutter LASER close 09:24:04 Received message from Camera: op=State serial=272373 09:24:04 GetSingleValue result=40 Value=cccccccc 09:24:04 SkyScan query 09:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:05 Parameters OK 09:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:05 Set A/D data flow result=40 09:24:05 Set A/D channel type result=40 09:24:05 Set A/D encoding result=40 09:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:05 Set channel filter=0.000000e+000 result=40 09:24:05 Config A/D Result=40 09:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:05 Get A/D filter: -9.255963e+061 result=40 09:24:05 Get A/D value=-858993460 result=40 09:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:05 Parameters OK 09:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:05 Set A/D data flow result=40 09:24:05 Set A/D channel type result=40 09:24:05 Set A/D encoding result=40 09:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:05 Set channel filter=0.000000e+000 result=40 09:24:05 Config A/D Result=40 09:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:05 Get A/D filter: -9.255963e+061 result=40 09:24:05 Get A/D value=-858993460 result=40 09:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:05 Aux= 09:24:05 Message to Camera, serial 272373 queued 09:24:42 Received message from Master: op=PointingHead serial=272386 09:24:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:24:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:24:42 Point started: ret=0 09:24:42 point_skyscan result=0 09:24:43 Check angles 09:24:43 SkyScan query 09:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:24:43 Message to Master queued w/err=0: serial=272386 error=0 09:24:48 Received message from Master: op=Filter serial=272387 09:24:48 Color wheel filter change from 0 to 0 09:24:48 FLIGetFilterPos err=0 currentPosition=0 09:24:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:48 Filter is already there-color wheel unchanged 09:24:49 Received message from Master: op=Shutter serial=272388 09:24:49 Shutter LASER close 09:24:49 Received message from Camera: op=State serial=272390 09:24:49 GetSingleValue result=40 Value=cccccccc 09:24:49 SkyScan query 09:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:24:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:49 Parameters OK 09:24:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:49 Set A/D data flow result=40 09:24:49 Set A/D channel type result=40 09:24:49 Set A/D encoding result=40 09:24:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:49 Set channel filter=0.000000e+000 result=40 09:24:49 Config A/D Result=40 09:24:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:49 Get A/D filter: -9.255963e+061 result=40 09:24:49 Get A/D value=-858993460 result=40 09:24:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:49 Parameters OK 09:24:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:49 Set A/D data flow result=40 09:24:49 Set A/D channel type result=40 09:24:49 Set A/D encoding result=40 09:24:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:49 Set channel filter=0.000000e+000 result=40 09:24:49 Config A/D Result=40 09:24:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:49 Get A/D filter: -9.255963e+061 result=40 09:24:49 Get A/D value=-858993460 result=40 09:24:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:49 Aux= 09:24:49 Message to Camera, serial 272390 queued 09:25:26 Received message from Master: op=PointingHead serial=272403 09:25:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:25:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:25:26 Point started: ret=0 09:25:26 point_skyscan result=0 09:25:27 Check angles 09:25:27 SkyScan query 09:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:25:28 Message to Master queued w/err=0: serial=272403 error=0 09:25:33 Received message from Master: op=Filter serial=272404 09:25:33 Color wheel filter change from 0 to 0 09:25:33 FLIGetFilterPos err=0 currentPosition=0 09:25:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:33 Filter is already there-color wheel unchanged 09:25:33 Received message from Master: op=Shutter serial=272405 09:25:33 Shutter LASER close 09:25:33 Received message from Camera: op=State serial=272407 09:25:33 GetSingleValue result=40 Value=cccccccc 09:25:33 SkyScan query 09:25:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:33 Parameters OK 09:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:33 Set A/D data flow result=40 09:25:33 Set A/D channel type result=40 09:25:33 Set A/D encoding result=40 09:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:33 Set channel filter=0.000000e+000 result=40 09:25:33 Config A/D Result=40 09:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:33 Get A/D filter: -9.255963e+061 result=40 09:25:33 Get A/D value=-858993460 result=40 09:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:33 Parameters OK 09:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:33 Set A/D data flow result=40 09:25:33 Set A/D channel type result=40 09:25:33 Set A/D encoding result=40 09:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:33 Set channel filter=0.000000e+000 result=40 09:25:33 Config A/D Result=40 09:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:33 Get A/D filter: -9.255963e+061 result=40 09:25:33 Get A/D value=-858993460 result=40 09:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:33 Aux= 09:25:33 Message to Camera, serial 272407 queued 09:26:10 Received message from Master: op=PointingHead serial=272420 09:26:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:26:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:26:11 Point started: ret=0 09:26:11 point_skyscan result=0 09:26:11 Check angles 09:26:11 SkyScan query 09:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:26:12 Message to Master queued w/err=0: serial=272420 error=0 09:26:17 Received message from Master: op=Filter serial=272421 09:26:17 Color wheel filter change from 0 to 0 09:26:17 FLIGetFilterPos err=0 currentPosition=0 09:26:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:17 Filter is already there-color wheel unchanged 09:26:17 Received message from Master: op=Shutter serial=272422 09:26:17 Shutter LASER close 09:26:17 Received message from Camera: op=State serial=272424 09:26:17 GetSingleValue result=40 Value=cccccccc 09:26:17 SkyScan query 09:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:26:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:18 Parameters OK 09:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:18 Set A/D data flow result=40 09:26:18 Set A/D channel type result=40 09:26:18 Set A/D encoding result=40 09:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:18 Set channel filter=0.000000e+000 result=40 09:26:18 Config A/D Result=40 09:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:18 Get A/D filter: -9.255963e+061 result=40 09:26:18 Get A/D value=-858993460 result=40 09:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:18 Parameters OK 09:26:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:18 Set A/D data flow result=40 09:26:18 Set A/D channel type result=40 09:26:18 Set A/D encoding result=40 09:26:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:18 Set channel filter=0.000000e+000 result=40 09:26:18 Config A/D Result=40 09:26:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:18 Get A/D filter: -9.255963e+061 result=40 09:26:18 Get A/D value=-858993460 result=40 09:26:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:18 Aux= 09:26:18 Message to Camera, serial 272424 queued 09:26:55 Received message from Master: op=PointingHead serial=272437 09:26:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:26:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:26:55 Point started: ret=0 09:26:55 point_skyscan result=0 09:26:56 Check angles 09:26:56 SkyScan query 09:26:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 09:26:56 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 09:26:56 Check angles 09:26:56 SkyScan query 09:26:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.7<-14980 Statuses=0008 0009 09:26:57 Msec=750 True Az=112.995 Ze=-44.7 Az status=0008 Ze status=0009 09:26:57 Check angles 09:26:57 SkyScan query 09:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.64<-16376 Statuses=0008 0009 09:26:58 Msec=1500 True Az=112.995 Ze=-65.64 Az status=0008 Ze status=0009 09:26:58 Check angles 09:26:58 SkyScan query 09:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.61<-17774 Statuses=0008 0009 09:26:59 Msec=2250 True Az=112.995 Ze=-86.61 Az status=0008 Ze status=0009 09:26:59 Check angles 09:26:59 SkyScan query 09:26:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.58<-19172 Statuses=0008 0009 09:26:59 Msec=3000 True Az=112.995 Ze=-107.58 Az status=0008 Ze status=0009 09:26:59 Check angles 09:26:59 SkyScan query 09:27:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.52<-20568 Statuses=0008 0009 09:27:00 Msec=3750 True Az=112.995 Ze=-128.52 Az status=0008 Ze status=0009 09:27:00 Check angles 09:27:00 SkyScan query 09:27:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 09:27:01 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 09:27:01 Check angles 09:27:01 SkyScan query 09:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.135<-23409 Statuses=0008 0009 09:27:02 Msec=5250 True Az=112.995 Ze=-171.135 Az status=0008 Ze status=0009 09:27:02 Check angles 09:27:02 SkyScan query 09:27:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:27:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:27:02 Message to Master queued w/err=0: serial=272437 error=0 09:27:07 Received message from Master: op=Filter serial=272438 09:27:07 Color wheel filter change from 0 to 0 09:27:07 FLIGetFilterPos err=0 currentPosition=0 09:27:07 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:07 Filter is already there-color wheel unchanged 09:27:08 Received message from Master: op=Shutter serial=272439 09:27:08 Shutter LASER open 09:27:08 Received message from Camera: op=State serial=272441 09:27:08 GetSingleValue result=40 Value=cccccccc 09:27:08 SkyScan query 09:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:27:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:08 Parameters OK 09:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:08 Set A/D data flow result=40 09:27:08 Set A/D channel type result=40 09:27:08 Set A/D encoding result=40 09:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:08 Set channel filter=0.000000e+000 result=40 09:27:08 Config A/D Result=40 09:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:08 Get A/D filter: -9.255963e+061 result=40 09:27:08 Get A/D value=-858993460 result=40 09:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:08 Parameters OK 09:27:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:08 Set A/D data flow result=40 09:27:08 Set A/D channel type result=40 09:27:08 Set A/D encoding result=40 09:27:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:08 Set channel filter=0.000000e+000 result=40 09:27:08 Config A/D Result=40 09:27:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:08 Get A/D filter: -9.255963e+061 result=40 09:27:08 Get A/D value=-858993460 result=40 09:27:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:08 Aux= 09:27:08 Message to Camera, serial 272441 queued 09:27:17 Received message from Master: op=Shutter serial=272451 09:27:17 Shutter LASER close 09:27:17 Received message from Master: op=PointingHead serial=272455 09:27:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:27:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:27:18 Point started: ret=0 09:27:18 point_skyscan result=0 09:27:18 Check angles 09:27:18 SkyScan query 09:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.875<-21525 Statuses=0008 0009 09:27:19 Msec=0 True Az=112.995 Ze=-142.875 Az status=0008 Ze status=0009 09:27:19 Check angles 09:27:19 SkyScan query 09:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 09:27:20 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 09:27:20 Check angles 09:27:20 SkyScan query 09:27:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.485<-18699 Statuses=0008 0009 09:27:20 Msec=1500 True Az=112.995 Ze=-100.485 Az status=0008 Ze status=0009 09:27:21 Check angles 09:27:21 SkyScan query 09:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 09:27:21 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 09:27:21 Check angles 09:27:21 SkyScan query 09:27:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.56<-15904 Statuses=0008 0009 09:27:22 Msec=3000 True Az=112.995 Ze=-58.56 Az status=0008 Ze status=0009 09:27:22 Check angles 09:27:22 SkyScan query 09:27:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 09:27:23 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 09:27:23 Check angles 09:27:23 SkyScan query 09:27:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.245<-13083 Statuses=0008 0009 09:27:23 Msec=4500 True Az=112.995 Ze=-16.245 Az status=0008 Ze status=0009 09:27:24 Check angles 09:27:24 SkyScan query 09:27:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.545<-11697 Statuses=0008 0009 09:27:24 Msec=5250 True Az=112.995 Ze=4.545 Az status=0008 Ze status=0009 09:27:24 Check angles 09:27:24 SkyScan query 09:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:27:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:27:25 Message to Master queued w/err=0: serial=272455 error=0 09:27:30 Received message from Master: op=Filter serial=272456 09:27:30 Color wheel filter change from 0 to 0 09:27:30 FLIGetFilterPos err=0 currentPosition=0 09:27:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:30 Filter is already there-color wheel unchanged 09:27:30 Received message from Master: op=Shutter serial=272457 09:27:30 Shutter LASER close 09:27:30 Received message from Camera: op=State serial=272459 09:27:30 GetSingleValue result=40 Value=cccccccc 09:27:30 SkyScan query 09:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:27:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:31 Parameters OK 09:27:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:31 Set A/D data flow result=40 09:27:31 Set A/D channel type result=40 09:27:31 Set A/D encoding result=40 09:27:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:31 Set channel filter=0.000000e+000 result=40 09:27:31 Config A/D Result=40 09:27:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:31 Get A/D filter: -9.255963e+061 result=40 09:27:31 Get A/D value=-858993460 result=40 09:27:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:31 Parameters OK 09:27:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:31 Set A/D data flow result=40 09:27:31 Set A/D channel type result=40 09:27:31 Set A/D encoding result=40 09:27:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:31 Set channel filter=0.000000e+000 result=40 09:27:31 Config A/D Result=40 09:27:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:31 Get A/D filter: -9.255963e+061 result=40 09:27:31 Get A/D value=-858993460 result=40 09:27:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:31 Aux= 09:27:31 Message to Camera, serial 272459 queued 09:28:08 Received message from Master: op=PointingHead serial=272472 09:28:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:28:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:28:08 Point started: ret=0 09:28:08 point_skyscan result=0 09:28:09 Check angles 09:28:09 SkyScan query 09:28:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:28:09 Message to Master queued w/err=0: serial=272472 error=0 09:28:14 Received message from Master: op=Filter serial=272473 09:28:14 Color wheel filter change from 0 to 0 09:28:14 FLIGetFilterPos err=0 currentPosition=0 09:28:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:14 Filter is already there-color wheel unchanged 09:28:15 Received message from Master: op=Shutter serial=272474 09:28:15 Shutter LASER close 09:28:15 Received message from Camera: op=State serial=272476 09:28:15 GetSingleValue result=40 Value=cccccccc 09:28:15 SkyScan query 09:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:28:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:15 Parameters OK 09:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:15 Set A/D data flow result=40 09:28:15 Set A/D channel type result=40 09:28:15 Set A/D encoding result=40 09:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:15 Set channel filter=0.000000e+000 result=40 09:28:15 Config A/D Result=40 09:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:15 Get A/D filter: -9.255963e+061 result=40 09:28:15 Get A/D value=-858993460 result=40 09:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:15 Parameters OK 09:28:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:15 Set A/D data flow result=40 09:28:15 Set A/D channel type result=40 09:28:15 Set A/D encoding result=40 09:28:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:15 Set channel filter=0.000000e+000 result=40 09:28:15 Config A/D Result=40 09:28:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:15 Get A/D filter: -9.255963e+061 result=40 09:28:15 Get A/D value=-858993460 result=40 09:28:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:15 Aux= 09:28:15 Message to Camera, serial 272476 queued 09:28:52 Received message from Master: op=PointingHead serial=272489 09:28:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:28:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:28:52 Point started: ret=0 09:28:52 point_skyscan result=0 09:28:53 Check angles 09:28:53 SkyScan query 09:28:54 SkyScan query done: ret=0 az=136.125<-9075 ze=-6.51<-12434 Statuses=0009 0008 09:28:54 Msec=0 True Az=136.125 Ze=-6.51 Az status=0009 Ze status=0008 09:28:54 Check angles 09:28:54 SkyScan query 09:28:54 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 09:28:54 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 09:28:55 Check angles 09:28:55 SkyScan query 09:28:55 SkyScan query done: ret=0 az=171.135<-11409 ze=-6.495<-12433 Statuses=0009 0008 09:28:55 Msec=1500 True Az=171.135 Ze=-6.495 Az status=0009 Ze status=0008 09:28:55 Check angles 09:28:55 SkyScan query 09:28:56 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:28:56 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:28:56 Message to Master queued w/err=0: serial=272489 error=0 09:29:01 Received message from Master: op=Filter serial=272490 09:29:01 Color wheel filter change from 0 to 0 09:29:01 FLIGetFilterPos err=0 currentPosition=0 09:29:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:01 Filter is already there-color wheel unchanged 09:29:01 Received message from Master: op=Shutter serial=272491 09:29:01 Shutter LASER close 09:29:01 Received message from Camera: op=State serial=272493 09:29:01 GetSingleValue result=40 Value=cccccccc 09:29:01 SkyScan query 09:29:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:29:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:02 Parameters OK 09:29:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:02 Set A/D data flow result=40 09:29:02 Set A/D channel type result=40 09:29:02 Set A/D encoding result=40 09:29:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:02 Set channel filter=0.000000e+000 result=40 09:29:02 Config A/D Result=40 09:29:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:02 Get A/D filter: -9.255963e+061 result=40 09:29:02 Get A/D value=-858993460 result=40 09:29:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:02 Parameters OK 09:29:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:02 Set A/D data flow result=40 09:29:02 Set A/D channel type result=40 09:29:02 Set A/D encoding result=40 09:29:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:02 Set channel filter=0.000000e+000 result=40 09:29:02 Config A/D Result=40 09:29:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:02 Get A/D filter: -9.255963e+061 result=40 09:29:02 Get A/D value=-858993460 result=40 09:29:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:02 Aux= 09:29:02 Message to Camera, serial 272493 queued 09:29:38 Received message from Master: op=PointingHead serial=272505 09:29:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:29:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:29:38 Point started: ret=0 09:29:38 point_skyscan result=0 09:29:39 Check angles 09:29:39 SkyScan query 09:29:39 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 09:29:39 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 09:29:40 Check angles 09:29:40 SkyScan query 09:29:40 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 09:29:40 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 09:29:40 Check angles 09:29:40 SkyScan query 09:29:41 SkyScan query done: ret=0 az=117.99<-7866 ze=6.495<-11567 Statuses=0009 0008 09:29:41 Msec=1500 True Az=117.99 Ze=6.495 Az status=0009 Ze status=0008 09:29:41 Check angles 09:29:41 SkyScan query 09:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:29:42 Message to Master queued w/err=0: serial=272505 error=0 09:29:47 Received message from Master: op=Filter serial=272506 09:29:47 Color wheel filter change from 0 to 0 09:29:47 FLIGetFilterPos err=0 currentPosition=0 09:29:47 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:47 Filter is already there-color wheel unchanged 09:29:47 Received message from Master: op=Shutter serial=272507 09:29:47 Shutter LASER close 09:29:47 Received message from Camera: op=State serial=272509 09:29:47 GetSingleValue result=40 Value=cccccccc 09:29:47 SkyScan query 09:29:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:29:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:47 Parameters OK 09:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:47 Set A/D data flow result=40 09:29:47 Set A/D channel type result=40 09:29:47 Set A/D encoding result=40 09:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:47 Set channel filter=0.000000e+000 result=40 09:29:47 Config A/D Result=40 09:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:47 Get A/D filter: -9.255963e+061 result=40 09:29:47 Get A/D value=-858993460 result=40 09:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:47 Parameters OK 09:29:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:47 Set A/D data flow result=40 09:29:47 Set A/D channel type result=40 09:29:47 Set A/D encoding result=40 09:29:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:47 Set channel filter=0.000000e+000 result=40 09:29:47 Config A/D Result=40 09:29:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:47 Get A/D filter: -9.255963e+061 result=40 09:29:47 Get A/D value=-858993460 result=40 09:29:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:47 Aux= 09:29:47 Message to Camera, serial 272509 queued 09:30:24 Received message from Master: op=PointingHead serial=272522 09:30:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:30:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:30:25 Point started: ret=0 09:30:25 point_skyscan result=0 09:30:25 Check angles 09:30:25 SkyScan query 09:30:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.25<-13550 Statuses=0008 0009 09:30:26 Msec=0 True Az=112.995 Ze=-23.25 Az status=0008 Ze status=0009 09:30:26 Check angles 09:30:26 SkyScan query 09:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 09:30:27 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 09:30:27 Check angles 09:30:27 SkyScan query 09:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 09:30:27 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 09:30:28 Check angles 09:30:28 SkyScan query 09:30:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 09:30:28 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 09:30:28 Check angles 09:30:28 SkyScan query 09:30:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 09:30:29 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 09:30:29 Check angles 09:30:29 SkyScan query 09:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 09:30:30 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 09:30:30 Check angles 09:30:30 SkyScan query 09:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.255<-22017 Statuses=0008 0009 09:30:30 Msec=4500 True Az=112.995 Ze=-150.255 Az status=0008 Ze status=0009 09:30:31 Check angles 09:30:31 SkyScan query 09:30:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 09:30:31 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 09:30:31 Check angles 09:30:31 SkyScan query 09:30:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:30:32 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:30:32 Message to Master queued w/err=0: serial=272522 error=0 09:30:37 Received message from Master: op=Filter serial=272523 09:30:37 Color wheel filter change from 0 to 0 09:30:37 FLIGetFilterPos err=0 currentPosition=0 09:30:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:37 Filter is already there-color wheel unchanged 09:30:37 Received message from Master: op=Shutter serial=272524 09:30:37 Shutter LASER open 09:30:37 Received message from Camera: op=State serial=272526 09:30:37 GetSingleValue result=40 Value=cccccccc 09:30:37 SkyScan query 09:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:30:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:38 Parameters OK 09:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:38 Set A/D data flow result=40 09:30:38 Set A/D channel type result=40 09:30:38 Set A/D encoding result=40 09:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:38 Set channel filter=0.000000e+000 result=40 09:30:38 Config A/D Result=40 09:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:38 Get A/D filter: -9.255963e+061 result=40 09:30:38 Get A/D value=-858993460 result=40 09:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:38 Parameters OK 09:30:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:38 Set A/D data flow result=40 09:30:38 Set A/D channel type result=40 09:30:38 Set A/D encoding result=40 09:30:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:38 Set channel filter=0.000000e+000 result=40 09:30:38 Config A/D Result=40 09:30:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:38 Get A/D filter: -9.255963e+061 result=40 09:30:38 Get A/D value=-858993460 result=40 09:30:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:38 Aux= 09:30:38 Message to Camera, serial 272526 queued 09:30:46 Received message from Master: op=Shutter serial=272536 09:30:46 Shutter LASER close 09:30:47 Received message from Master: op=PointingHead serial=272540 09:30:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:30:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:30:47 Point started: ret=0 09:30:47 point_skyscan result=0 09:30:48 Check angles 09:30:48 SkyScan query 09:30:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 09:30:48 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 09:30:49 Check angles 09:30:49 SkyScan query 09:30:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.55<-20170 Statuses=0008 0009 09:30:49 Msec=750 True Az=112.995 Ze=-122.55 Az status=0008 Ze status=0009 09:30:49 Check angles 09:30:49 SkyScan query 09:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.175<-18745 Statuses=0008 0009 09:30:50 Msec=1500 True Az=112.995 Ze=-101.175 Az status=0008 Ze status=0009 09:30:50 Check angles 09:30:50 SkyScan query 09:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.19<-17346 Statuses=0008 0009 09:30:51 Msec=2250 True Az=112.995 Ze=-80.19 Az status=0008 Ze status=0009 09:30:51 Check angles 09:30:51 SkyScan query 09:30:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 09:30:51 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 09:30:52 Check angles 09:30:52 SkyScan query 09:30:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 09:30:52 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 09:30:52 Check angles 09:30:52 SkyScan query 09:30:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 09:30:53 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 09:30:53 Check angles 09:30:53 SkyScan query 09:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=4.095<-11727 Statuses=0008 0009 09:30:54 Msec=5250 True Az=112.995 Ze=4.095 Az status=0008 Ze status=0009 09:30:54 Check angles 09:30:54 SkyScan query 09:30:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:30:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:30:54 Message to Master queued w/err=0: serial=272540 error=0 09:30:59 Received message from Master: op=Filter serial=272541 09:30:59 Color wheel filter change from 0 to 0 09:30:59 FLIGetFilterPos err=0 currentPosition=0 09:30:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:59 Filter is already there-color wheel unchanged 09:31:00 Received message from Master: op=Shutter serial=272542 09:31:00 Shutter LASER close 09:31:00 Received message from Camera: op=State serial=272544 09:31:00 GetSingleValue result=40 Value=cccccccc 09:31:00 SkyScan query 09:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:00 Parameters OK 09:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:00 Set A/D data flow result=40 09:31:00 Set A/D channel type result=40 09:31:00 Set A/D encoding result=40 09:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:00 Set channel filter=0.000000e+000 result=40 09:31:00 Config A/D Result=40 09:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:00 Get A/D filter: -9.255963e+061 result=40 09:31:00 Get A/D value=-858993460 result=40 09:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:00 Parameters OK 09:31:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:00 Set A/D data flow result=40 09:31:00 Set A/D channel type result=40 09:31:00 Set A/D encoding result=40 09:31:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:00 Set channel filter=0.000000e+000 result=40 09:31:00 Config A/D Result=40 09:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:00 Get A/D filter: -9.255963e+061 result=40 09:31:00 Get A/D value=-858993460 result=40 09:31:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:00 Aux= 09:31:00 Message to Camera, serial 272544 queued 09:31:37 Received message from Master: op=PointingHead serial=272557 09:31:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:31:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:31:38 Point started: ret=0 09:31:38 point_skyscan result=0 09:31:38 Check angles 09:31:38 SkyScan query 09:31:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:31:39 Message to Master queued w/err=0: serial=272557 error=0 09:31:44 Received message from Master: op=Filter serial=272558 09:31:44 Color wheel filter change from 0 to 0 09:31:44 FLIGetFilterPos err=0 currentPosition=0 09:31:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:44 Filter is already there-color wheel unchanged 09:31:44 Received message from Master: op=Shutter serial=272559 09:31:44 Shutter LASER close 09:31:44 Received message from Camera: op=State serial=272561 09:31:44 GetSingleValue result=40 Value=cccccccc 09:31:44 SkyScan query 09:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:31:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:45 Parameters OK 09:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:45 Set A/D data flow result=40 09:31:45 Set A/D channel type result=40 09:31:45 Set A/D encoding result=40 09:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:45 Set channel filter=0.000000e+000 result=40 09:31:45 Config A/D Result=40 09:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:45 Get A/D filter: -9.255963e+061 result=40 09:31:45 Get A/D value=-858993460 result=40 09:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:45 Parameters OK 09:31:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:45 Set A/D data flow result=40 09:31:45 Set A/D channel type result=40 09:31:45 Set A/D encoding result=40 09:31:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:45 Set channel filter=0.000000e+000 result=40 09:31:45 Config A/D Result=40 09:31:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:45 Get A/D filter: -9.255963e+061 result=40 09:31:45 Get A/D value=-858993460 result=40 09:31:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:45 Aux= 09:31:45 Message to Camera, serial 272561 queued 09:32:22 Received message from Master: op=PointingHead serial=272574 09:32:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:32:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:32:22 Point started: ret=0 09:32:22 point_skyscan result=0 09:32:23 Check angles 09:32:23 SkyScan query 09:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:32:23 Message to Master queued w/err=0: serial=272574 error=0 09:32:28 Received message from Master: op=Filter serial=272575 09:32:28 Color wheel filter change from 0 to 0 09:32:28 FLIGetFilterPos err=0 currentPosition=0 09:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:28 Filter is already there-color wheel unchanged 09:32:28 Received message from Master: op=Shutter serial=272576 09:32:28 Shutter LASER close 09:32:28 Received message from Camera: op=State serial=272578 09:32:28 GetSingleValue result=40 Value=cccccccc 09:32:28 SkyScan query 09:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:32:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:29 Parameters OK 09:32:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:29 Set A/D data flow result=40 09:32:29 Set A/D channel type result=40 09:32:29 Set A/D encoding result=40 09:32:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:29 Set channel filter=0.000000e+000 result=40 09:32:29 Config A/D Result=40 09:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:29 Get A/D filter: -9.255963e+061 result=40 09:32:29 Get A/D value=-858993460 result=40 09:32:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:29 Parameters OK 09:32:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:29 Set A/D data flow result=40 09:32:29 Set A/D channel type result=40 09:32:29 Set A/D encoding result=40 09:32:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:29 Set channel filter=0.000000e+000 result=40 09:32:29 Config A/D Result=40 09:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:29 Get A/D filter: -9.255963e+061 result=40 09:32:29 Get A/D value=-858993460 result=40 09:32:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:29 Aux= 09:32:29 Message to Camera, serial 272578 queued 09:33:06 Received message from Master: op=PointingHead serial=272591 09:33:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:33:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:33:06 Point started: ret=0 09:33:06 point_skyscan result=0 09:33:07 Check angles 09:33:07 SkyScan query 09:33:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:33:07 Message to Master queued w/err=0: serial=272591 error=0 09:33:12 Received message from Master: op=Filter serial=272592 09:33:12 Color wheel filter change from 0 to 0 09:33:12 FLIGetFilterPos err=0 currentPosition=0 09:33:12 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:12 Filter is already there-color wheel unchanged 09:33:13 Received message from Master: op=Shutter serial=272593 09:33:13 Shutter LASER close 09:33:13 Received message from Camera: op=State serial=272595 09:33:13 GetSingleValue result=40 Value=cccccccc 09:33:13 SkyScan query 09:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:33:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:13 Parameters OK 09:33:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:13 Set A/D data flow result=40 09:33:13 Set A/D channel type result=40 09:33:13 Set A/D encoding result=40 09:33:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:13 Set channel filter=0.000000e+000 result=40 09:33:13 Config A/D Result=40 09:33:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:13 Get A/D filter: -9.255963e+061 result=40 09:33:13 Get A/D value=-858993460 result=40 09:33:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:13 Parameters OK 09:33:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:13 Set A/D data flow result=40 09:33:13 Set A/D channel type result=40 09:33:13 Set A/D encoding result=40 09:33:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:13 Set channel filter=0.000000e+000 result=40 09:33:13 Config A/D Result=40 09:33:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:13 Get A/D filter: -9.255963e+061 result=40 09:33:13 Get A/D value=-858993460 result=40 09:33:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:13 Aux= 09:33:13 Message to Camera, serial 272595 queued 09:33:35 Received message from Master: op=Identify serial=272596 09:33:50 Received message from Master: op=PointingHead serial=272611 09:33:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:33:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:33:50 Point started: ret=0 09:33:50 point_skyscan result=0 09:33:51 Check angles 09:33:51 SkyScan query 09:33:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.67<-13578 Statuses=0008 0009 09:33:52 Msec=0 True Az=112.995 Ze=-23.67 Az status=0008 Ze status=0009 09:33:52 Check angles 09:33:52 SkyScan query 09:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.61<-14974 Statuses=0008 0009 09:33:53 Msec=750 True Az=112.995 Ze=-44.61 Az status=0008 Ze status=0009 09:33:53 Check angles 09:33:53 SkyScan query 09:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 09:33:53 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 09:33:53 Check angles 09:33:53 SkyScan query 09:33:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 09:33:54 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 09:33:54 Check angles 09:33:54 SkyScan query 09:33:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 09:33:55 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 09:33:55 Check angles 09:33:55 SkyScan query 09:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 09:33:56 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 09:33:56 Check angles 09:33:56 SkyScan query 09:33:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 09:33:56 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 09:33:56 Check angles 09:33:56 SkyScan query 09:33:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 09:33:57 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 09:33:57 Check angles 09:33:57 SkyScan query 09:33:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:33:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:33:58 Message to Master queued w/err=0: serial=272611 error=0 09:34:03 Received message from Master: op=Filter serial=272612 09:34:03 Color wheel filter change from 0 to 0 09:34:03 FLIGetFilterPos err=0 currentPosition=0 09:34:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:03 Filter is already there-color wheel unchanged 09:34:03 Received message from Master: op=Shutter serial=272613 09:34:03 Shutter LASER open 09:34:03 Received message from Camera: op=State serial=272615 09:34:03 GetSingleValue result=40 Value=cccccccc 09:34:03 SkyScan query 09:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:34:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:04 Parameters OK 09:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:04 Set A/D data flow result=40 09:34:04 Set A/D channel type result=40 09:34:04 Set A/D encoding result=40 09:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:04 Set channel filter=0.000000e+000 result=40 09:34:04 Config A/D Result=40 09:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:04 Get A/D filter: -9.255963e+061 result=40 09:34:04 Get A/D value=-858993460 result=40 09:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:04 Parameters OK 09:34:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:04 Set A/D data flow result=40 09:34:04 Set A/D channel type result=40 09:34:04 Set A/D encoding result=40 09:34:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:04 Set channel filter=0.000000e+000 result=40 09:34:04 Config A/D Result=40 09:34:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:04 Get A/D filter: -9.255963e+061 result=40 09:34:04 Get A/D value=-858993460 result=40 09:34:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:04 Aux= 09:34:04 Message to Camera, serial 272615 queued 09:34:12 Received message from Master: op=Shutter serial=272625 09:34:12 Shutter LASER close 09:34:13 Received message from Master: op=PointingHead serial=272629 09:34:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:34:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:34:13 Point started: ret=0 09:34:13 point_skyscan result=0 09:34:14 Check angles 09:34:14 SkyScan query 09:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 09:34:15 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 [UTC 2019-3-14 09:34:15] 09:34:15 Check angles 09:34:15 SkyScan query 09:34:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-119.595<-19973 Statuses=0008 0009 09:34:15 Msec=750 True Az=112.995 Ze=-119.595 Az status=0008 Ze status=0009 09:34:15 Check angles 09:34:15 SkyScan query 09:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.365<-18691 Statuses=0008 0009 09:34:16 Msec=1500 True Az=112.995 Ze=-100.365 Az status=0008 Ze status=0009 09:34:16 Check angles 09:34:16 SkyScan query 09:34:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 09:34:17 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 09:34:17 Check angles 09:34:17 SkyScan query 09:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 09:34:18 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 09:34:18 Check angles 09:34:18 SkyScan query 09:34:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.125<-14475 Statuses=0008 0009 09:34:18 Msec=3750 True Az=112.995 Ze=-37.125 Az status=0008 Ze status=0009 09:34:19 Check angles 09:34:19 SkyScan query 09:34:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.69<-13046 Statuses=0008 0009 09:34:19 Msec=4500 True Az=112.995 Ze=-15.69 Az status=0008 Ze status=0009 09:34:19 Check angles 09:34:19 SkyScan query 09:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=5.295<-11647 Statuses=0008 0009 09:34:20 Msec=5250 True Az=112.995 Ze=5.295 Az status=0008 Ze status=0009 09:34:20 Check angles 09:34:20 SkyScan query 09:34:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:34:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:34:21 Message to Master queued w/err=0: serial=272629 error=0 09:34:26 Received message from Master: op=Filter serial=272630 09:34:26 Color wheel filter change from 0 to 0 09:34:26 FLIGetFilterPos err=0 currentPosition=0 09:34:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:26 Filter is already there-color wheel unchanged 09:34:26 Received message from Master: op=Shutter serial=272631 09:34:26 Shutter LASER close 09:34:26 Received message from Camera: op=State serial=272633 09:34:26 GetSingleValue result=40 Value=cccccccc 09:34:26 SkyScan query 09:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:26 Parameters OK 09:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:26 Set A/D data flow result=40 09:34:26 Set A/D channel type result=40 09:34:26 Set A/D encoding result=40 09:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:26 Set channel filter=0.000000e+000 result=40 09:34:26 Config A/D Result=40 09:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:26 Get A/D filter: -9.255963e+061 result=40 09:34:26 Get A/D value=-858993460 result=40 09:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:26 Parameters OK 09:34:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:26 Set A/D data flow result=40 09:34:26 Set A/D channel type result=40 09:34:26 Set A/D encoding result=40 09:34:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:26 Set channel filter=0.000000e+000 result=40 09:34:26 Config A/D Result=40 09:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:26 Get A/D filter: -9.255963e+061 result=40 09:34:26 Get A/D value=-858993460 result=40 09:34:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:26 Aux= 09:34:26 Message to Camera, serial 272633 queued 09:35:03 Received message from Master: op=PointingHead serial=272646 09:35:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:35:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:35:04 Point started: ret=0 09:35:04 point_skyscan result=0 09:35:04 Check angles 09:35:04 SkyScan query 09:35:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:35:05 Message to Master queued w/err=0: serial=272646 error=0 09:35:10 Received message from Master: op=Filter serial=272647 09:35:10 Color wheel filter change from 0 to 0 09:35:10 FLIGetFilterPos err=0 currentPosition=0 09:35:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:10 Filter is already there-color wheel unchanged 09:35:10 Received message from Master: op=Shutter serial=272648 09:35:10 Shutter LASER close 09:35:10 Received message from Camera: op=State serial=272650 09:35:10 GetSingleValue result=40 Value=cccccccc 09:35:10 SkyScan query 09:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:35:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:11 Parameters OK 09:35:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:11 Set A/D data flow result=40 09:35:11 Set A/D channel type result=40 09:35:11 Set A/D encoding result=40 09:35:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:11 Set channel filter=0.000000e+000 result=40 09:35:11 Config A/D Result=40 09:35:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:11 Get A/D filter: -9.255963e+061 result=40 09:35:11 Get A/D value=-858993460 result=40 09:35:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:11 Parameters OK 09:35:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:11 Set A/D data flow result=40 09:35:11 Set A/D channel type result=40 09:35:11 Set A/D encoding result=40 09:35:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:11 Set channel filter=0.000000e+000 result=40 09:35:11 Config A/D Result=40 09:35:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:11 Get A/D filter: -9.255963e+061 result=40 09:35:11 Get A/D value=-858993460 result=40 09:35:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:11 Aux= 09:35:11 Message to Camera, serial 272650 queued 09:35:48 Received message from Master: op=PointingHead serial=272663 09:35:48 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:35:48 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:35:48 Point started: ret=0 09:35:48 point_skyscan result=0 09:35:49 Check angles 09:35:49 SkyScan query 09:35:49 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 09:35:49 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 09:35:50 Check angles 09:35:50 SkyScan query 09:35:50 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 09:35:50 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 09:35:50 Check angles 09:35:50 SkyScan query 09:35:51 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 09:35:51 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 09:35:51 Check angles 09:35:51 SkyScan query 09:35:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:35:52 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:35:52 Message to Master queued w/err=0: serial=272663 error=0 09:35:57 Received message from Master: op=Filter serial=272664 09:35:57 Color wheel filter change from 0 to 0 09:35:57 FLIGetFilterPos err=0 currentPosition=0 09:35:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:57 Filter is already there-color wheel unchanged 09:35:57 Received message from Master: op=Shutter serial=272665 09:35:57 Shutter LASER close 09:35:57 Received message from Camera: op=State serial=272667 09:35:57 GetSingleValue result=40 Value=cccccccc 09:35:57 SkyScan query 09:35:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:57 Parameters OK 09:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:57 Set A/D data flow result=40 09:35:57 Set A/D channel type result=40 09:35:57 Set A/D encoding result=40 09:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:57 Set channel filter=0.000000e+000 result=40 09:35:57 Config A/D Result=40 09:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:57 Get A/D filter: -9.255963e+061 result=40 09:35:57 Get A/D value=-858993460 result=40 09:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:57 Parameters OK 09:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:57 Set A/D data flow result=40 09:35:57 Set A/D channel type result=40 09:35:57 Set A/D encoding result=40 09:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:57 Set channel filter=0.000000e+000 result=40 09:35:57 Config A/D Result=40 09:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:57 Get A/D filter: -9.255963e+061 result=40 09:35:57 Get A/D value=-858993460 result=40 09:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:57 Aux= 09:35:57 Message to Camera, serial 272667 queued 09:36:34 Received message from Master: op=PointingHead serial=272680 09:36:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:36:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:36:35 Point started: ret=0 09:36:35 point_skyscan result=0 09:36:35 Check angles 09:36:35 SkyScan query 09:36:36 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 09:36:36 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 09:36:36 Check angles 09:36:36 SkyScan query 09:36:37 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 09:36:37 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 09:36:37 Check angles 09:36:37 SkyScan query 09:36:37 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 09:36:37 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 09:36:38 Check angles 09:36:38 SkyScan query 09:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:38 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:36:38 Message to Master queued w/err=0: serial=272680 error=0 09:36:43 Received message from Master: op=Filter serial=272681 09:36:43 Color wheel filter change from 0 to 0 09:36:43 FLIGetFilterPos err=0 currentPosition=0 09:36:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:43 Filter is already there-color wheel unchanged 09:36:43 Received message from Master: op=Shutter serial=272682 09:36:43 Shutter LASER close 09:36:43 Received message from Camera: op=State serial=272684 09:36:43 GetSingleValue result=40 Value=cccccccc 09:36:43 SkyScan query 09:36:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:36:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:44 Parameters OK 09:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:44 Set A/D data flow result=40 09:36:44 Set A/D channel type result=40 09:36:44 Set A/D encoding result=40 09:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:44 Set channel filter=0.000000e+000 result=40 09:36:44 Config A/D Result=40 09:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:44 Get A/D filter: -9.255963e+061 result=40 09:36:44 Get A/D value=-858993460 result=40 09:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:44 Parameters OK 09:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:44 Set A/D data flow result=40 09:36:44 Set A/D channel type result=40 09:36:44 Set A/D encoding result=40 09:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:44 Set channel filter=0.000000e+000 result=40 09:36:44 Config A/D Result=40 09:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:44 Get A/D filter: -9.255963e+061 result=40 09:36:44 Get A/D value=-858993460 result=40 09:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:44 Aux= 09:36:44 Message to Camera, serial 272684 queued 09:37:21 Received message from Master: op=PointingHead serial=272697 09:37:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:37:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:37:21 Point started: ret=0 09:37:21 point_skyscan result=0 09:37:22 Check angles 09:37:22 SkyScan query 09:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.295<-13553 Statuses=0008 0009 09:37:22 Msec=0 True Az=112.995 Ze=-23.295 Az status=0008 Ze status=0009 09:37:23 Check angles 09:37:23 SkyScan query 09:37:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.205<-14947 Statuses=0008 0009 09:37:23 Msec=750 True Az=112.995 Ze=-44.205 Az status=0008 Ze status=0009 09:37:23 Check angles 09:37:23 SkyScan query 09:37:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 09:37:24 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 09:37:24 Check angles 09:37:24 SkyScan query 09:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 09:37:25 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 09:37:25 Check angles 09:37:25 SkyScan query 09:37:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.49<-19166 Statuses=0008 0009 09:37:25 Msec=3000 True Az=112.995 Ze=-107.49 Az status=0008 Ze status=0009 09:37:26 Check angles 09:37:26 SkyScan query 09:37:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.865<-20591 Statuses=0008 0009 09:37:26 Msec=3750 True Az=112.995 Ze=-128.865 Az status=0008 Ze status=0009 09:37:26 Check angles 09:37:26 SkyScan query 09:37:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.85<-21990 Statuses=0008 0009 09:37:27 Msec=4500 True Az=112.995 Ze=-149.85 Az status=0008 Ze status=0009 09:37:27 Check angles 09:37:27 SkyScan query 09:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.745<-23383 Statuses=0008 0009 09:37:28 Msec=5250 True Az=112.995 Ze=-170.745 Az status=0008 Ze status=0009 09:37:28 Check angles 09:37:28 SkyScan query 09:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:37:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:37:28 Message to Master queued w/err=0: serial=272697 error=0 09:37:33 Received message from Master: op=Filter serial=272698 09:37:33 Color wheel filter change from 0 to 0 09:37:33 FLIGetFilterPos err=0 currentPosition=0 09:37:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:33 Filter is already there-color wheel unchanged 09:37:34 Received message from Master: op=Shutter serial=272699 09:37:34 Shutter LASER open 09:37:34 Received message from Camera: op=State serial=272701 09:37:34 GetSingleValue result=40 Value=cccccccc 09:37:34 SkyScan query 09:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:37:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:34 Parameters OK 09:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:34 Set A/D data flow result=40 09:37:34 Set A/D channel type result=40 09:37:34 Set A/D encoding result=40 09:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:34 Set channel filter=0.000000e+000 result=40 09:37:34 Config A/D Result=40 09:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:34 Get A/D filter: -9.255963e+061 result=40 09:37:34 Get A/D value=-858993460 result=40 09:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:34 Parameters OK 09:37:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:34 Set A/D data flow result=40 09:37:34 Set A/D channel type result=40 09:37:34 Set A/D encoding result=40 09:37:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:34 Set channel filter=0.000000e+000 result=40 09:37:34 Config A/D Result=40 09:37:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:34 Get A/D filter: -9.255963e+061 result=40 09:37:34 Get A/D value=-858993460 result=40 09:37:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:34 Aux= 09:37:34 Message to Camera, serial 272701 queued 09:37:43 Received message from Master: op=Shutter serial=272711 09:37:43 Shutter LASER close 09:37:43 Received message from Master: op=PointingHead serial=272715 09:37:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:37:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:37:44 Point started: ret=0 09:37:44 point_skyscan result=0 09:37:44 Check angles 09:37:44 SkyScan query 09:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 09:37:45 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 09:37:45 Check angles 09:37:45 SkyScan query 09:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 09:37:46 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 09:37:46 Check angles 09:37:46 SkyScan query 09:37:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 09:37:46 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 09:37:47 Check angles 09:37:47 SkyScan query 09:37:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.815<-17321 Statuses=0008 0009 09:37:47 Msec=2250 True Az=112.995 Ze=-79.815 Az status=0008 Ze status=0009 09:37:47 Check angles 09:37:47 SkyScan query 09:37:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 09:37:48 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 09:37:48 Check angles 09:37:48 SkyScan query 09:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 09:37:49 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 09:37:49 Check angles 09:37:49 SkyScan query 09:37:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 09:37:49 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 09:37:50 Check angles 09:37:50 SkyScan query 09:37:50 SkyScan query done: ret=0 az=112.995<-7533 ze=5.01<-11666 Statuses=0008 0009 09:37:50 Msec=5250 True Az=112.995 Ze=5.01 Az status=0008 Ze status=0009 09:37:50 Check angles 09:37:50 SkyScan query 09:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:37:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:37:51 Message to Master queued w/err=0: serial=272715 error=0 09:37:56 Received message from Master: op=Filter serial=272716 09:37:56 Color wheel filter change from 0 to 0 09:37:56 FLIGetFilterPos err=0 currentPosition=0 09:37:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:56 Filter is already there-color wheel unchanged 09:37:56 Received message from Master: op=Shutter serial=272717 09:37:56 Shutter LASER close 09:37:56 Received message from Camera: op=State serial=272719 09:37:56 GetSingleValue result=40 Value=cccccccc 09:37:56 SkyScan query 09:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:37:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:57 Parameters OK 09:37:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:57 Set A/D data flow result=40 09:37:57 Set A/D channel type result=40 09:37:57 Set A/D encoding result=40 09:37:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:57 Set channel filter=0.000000e+000 result=40 09:37:57 Config A/D Result=40 09:37:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:57 Get A/D filter: -9.255963e+061 result=40 09:37:57 Get A/D value=-858993460 result=40 09:37:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:57 Parameters OK 09:37:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:57 Set A/D data flow result=40 09:37:57 Set A/D channel type result=40 09:37:57 Set A/D encoding result=40 09:37:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:57 Set channel filter=0.000000e+000 result=40 09:37:57 Config A/D Result=40 09:37:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:57 Get A/D filter: -9.255963e+061 result=40 09:37:57 Get A/D value=-858993460 result=40 09:37:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:57 Aux= 09:37:57 Message to Camera, serial 272719 queued 09:38:34 Received message from Master: op=PointingHead serial=272732 09:38:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:38:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:38:34 Point started: ret=0 09:38:34 point_skyscan result=0 09:38:35 Check angles 09:38:35 SkyScan query 09:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:38:36 Message to Master queued w/err=0: serial=272732 error=0 09:38:41 Received message from Master: op=Filter serial=272733 09:38:41 Color wheel filter change from 0 to 0 09:38:41 FLIGetFilterPos err=0 currentPosition=0 09:38:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:41 Filter is already there-color wheel unchanged 09:38:41 Received message from Master: op=Shutter serial=272734 09:38:41 Shutter LASER close 09:38:41 Received message from Camera: op=State serial=272736 09:38:41 GetSingleValue result=40 Value=cccccccc 09:38:41 SkyScan query 09:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:38:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:41 Parameters OK 09:38:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:41 Set A/D data flow result=40 09:38:41 Set A/D channel type result=40 09:38:41 Set A/D encoding result=40 09:38:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:41 Set channel filter=0.000000e+000 result=40 09:38:41 Config A/D Result=40 09:38:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:41 Get A/D filter: -9.255963e+061 result=40 09:38:41 Get A/D value=-858993460 result=40 09:38:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:41 Parameters OK 09:38:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:41 Set A/D data flow result=40 09:38:41 Set A/D channel type result=40 09:38:41 Set A/D encoding result=40 09:38:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:41 Set channel filter=0.000000e+000 result=40 09:38:41 Config A/D Result=40 09:38:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:41 Get A/D filter: -9.255963e+061 result=40 09:38:41 Get A/D value=-858993460 result=40 09:38:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:41 Aux= 09:38:41 Message to Camera, serial 272736 queued 09:39:17 Received message from Master: op=PointingHead serial=272748 09:39:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:39:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:39:18 Point started: ret=0 09:39:18 point_skyscan result=0 09:39:18 Check angles 09:39:18 SkyScan query 09:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:39:19 Message to Master queued w/err=0: serial=272748 error=0 09:39:24 Received message from Master: op=Filter serial=272749 09:39:24 Color wheel filter change from 0 to 0 09:39:24 FLIGetFilterPos err=0 currentPosition=0 09:39:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:24 Filter is already there-color wheel unchanged 09:39:24 Received message from Master: op=Shutter serial=272750 09:39:24 Shutter LASER close 09:39:24 Received message from Camera: op=State serial=272752 09:39:24 GetSingleValue result=40 Value=cccccccc 09:39:24 SkyScan query 09:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:39:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:25 Parameters OK 09:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:25 Set A/D data flow result=40 09:39:25 Set A/D channel type result=40 09:39:25 Set A/D encoding result=40 09:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:25 Set channel filter=0.000000e+000 result=40 09:39:25 Config A/D Result=40 09:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:25 Get A/D filter: -9.255963e+061 result=40 09:39:25 Get A/D value=-858993460 result=40 09:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:25 Parameters OK 09:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:25 Set A/D data flow result=40 09:39:25 Set A/D channel type result=40 09:39:25 Set A/D encoding result=40 09:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:25 Set channel filter=0.000000e+000 result=40 09:39:25 Config A/D Result=40 09:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:25 Get A/D filter: -9.255963e+061 result=40 09:39:25 Get A/D value=-858993460 result=40 09:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:25 Aux= 09:39:25 Message to Camera, serial 272752 queued 09:40:02 Received message from Master: op=PointingHead serial=272765 09:40:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:40:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:40:02 Point started: ret=0 09:40:02 point_skyscan result=0 09:40:03 Check angles 09:40:03 SkyScan query 09:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:40:03 Message to Master queued w/err=0: serial=272765 error=0 09:40:08 Received message from Master: op=Filter serial=272766 09:40:08 Color wheel filter change from 0 to 0 09:40:08 FLIGetFilterPos err=0 currentPosition=0 09:40:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:08 Filter is already there-color wheel unchanged 09:40:08 Received message from Master: op=Shutter serial=272767 09:40:08 Shutter LASER close 09:40:08 Received message from Camera: op=State serial=272769 09:40:08 GetSingleValue result=40 Value=cccccccc 09:40:08 SkyScan query 09:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:40:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:09 Parameters OK 09:40:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:09 Set A/D data flow result=40 09:40:09 Set A/D channel type result=40 09:40:09 Set A/D encoding result=40 09:40:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:09 Set channel filter=0.000000e+000 result=40 09:40:09 Config A/D Result=40 09:40:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:09 Get A/D filter: -9.255963e+061 result=40 09:40:09 Get A/D value=-858993460 result=40 09:40:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:09 Parameters OK 09:40:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:09 Set A/D data flow result=40 09:40:09 Set A/D channel type result=40 09:40:09 Set A/D encoding result=40 09:40:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:09 Set channel filter=0.000000e+000 result=40 09:40:09 Config A/D Result=40 09:40:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:09 Get A/D filter: -9.255963e+061 result=40 09:40:09 Get A/D value=-858993460 result=40 09:40:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:09 Aux= 09:40:09 Message to Camera, serial 272769 queued 09:40:46 Received message from Master: op=PointingHead serial=272782 09:40:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:40:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:40:46 Point started: ret=0 09:40:46 point_skyscan result=0 09:40:47 Check angles 09:40:47 SkyScan query 09:40:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 09:40:47 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 09:40:48 Check angles 09:40:48 SkyScan query 09:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 09:40:48 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 09:40:48 Check angles 09:40:48 SkyScan query 09:40:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 09:40:49 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 09:40:49 Check angles 09:40:49 SkyScan query 09:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.995<-17733 Statuses=0008 0009 09:40:50 Msec=2250 True Az=112.995 Ze=-85.995 Az status=0008 Ze status=0009 09:40:50 Check angles 09:40:50 SkyScan query 09:40:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.935<-19129 Statuses=0008 0009 09:40:50 Msec=3000 True Az=112.995 Ze=-106.935 Az status=0008 Ze status=0009 09:40:51 Check angles 09:40:51 SkyScan query 09:40:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.905<-20527 Statuses=0008 0009 09:40:51 Msec=3750 True Az=112.995 Ze=-127.905 Az status=0008 Ze status=0009 09:40:51 Check angles 09:40:51 SkyScan query 09:40:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.845<-21923 Statuses=0008 0009 09:40:52 Msec=4500 True Az=112.995 Ze=-148.845 Az status=0008 Ze status=0009 09:40:52 Check angles 09:40:52 SkyScan query 09:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 09:40:53 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 09:40:53 Check angles 09:40:53 SkyScan query 09:40:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:40:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:40:53 Message to Master queued w/err=0: serial=272782 error=0 09:40:58 Received message from Master: op=Filter serial=272783 09:40:58 Color wheel filter change from 0 to 0 09:40:58 FLIGetFilterPos err=0 currentPosition=0 09:40:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:58 Filter is already there-color wheel unchanged 09:40:59 Received message from Master: op=Shutter serial=272784 09:40:59 Shutter LASER open 09:40:59 Received message from Camera: op=State serial=272786 09:40:59 GetSingleValue result=40 Value=cccccccc 09:40:59 SkyScan query 09:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:40:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:59 Parameters OK 09:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:59 Set A/D data flow result=40 09:40:59 Set A/D channel type result=40 09:40:59 Set A/D encoding result=40 09:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:59 Set channel filter=0.000000e+000 result=40 09:40:59 Config A/D Result=40 09:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:59 Get A/D filter: -9.255963e+061 result=40 09:40:59 Get A/D value=-858993460 result=40 09:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:59 Parameters OK 09:40:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:59 Set A/D data flow result=40 09:40:59 Set A/D channel type result=40 09:40:59 Set A/D encoding result=40 09:40:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:59 Set channel filter=0.000000e+000 result=40 09:40:59 Config A/D Result=40 09:40:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:59 Get A/D filter: -9.255963e+061 result=40 09:40:59 Get A/D value=-858993460 result=40 09:40:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:59 Aux= 09:40:59 Message to Camera, serial 272786 queued 09:41:08 Received message from Master: op=Shutter serial=272796 09:41:08 Shutter LASER close 09:41:08 Received message from Master: op=PointingHead serial=272800 09:41:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:09 Point started: ret=0 09:41:09 point_skyscan result=0 09:41:10 Check angles 09:41:10 SkyScan query 09:41:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.505<-21567 Statuses=0008 0009 09:41:10 Msec=0 True Az=112.995 Ze=-143.505 Az status=0008 Ze status=0009 09:41:10 Check angles 09:41:10 SkyScan query 09:41:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 09:41:11 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 09:41:11 Check angles 09:41:11 SkyScan query 09:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.595<-18773 Statuses=0008 0009 09:41:12 Msec=1500 True Az=112.995 Ze=-101.595 Az status=0008 Ze status=0009 09:41:12 Check angles 09:41:12 SkyScan query 09:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.625<-17375 Statuses=0008 0009 09:41:12 Msec=2250 True Az=112.995 Ze=-80.625 Az status=0008 Ze status=0009 09:41:13 Check angles 09:41:13 SkyScan query 09:41:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.685<-15979 Statuses=0008 0009 09:41:13 Msec=3000 True Az=112.995 Ze=-59.685 Az status=0008 Ze status=0009 09:41:13 Check angles 09:41:13 SkyScan query 09:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 09:41:14 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 09:41:14 Check angles 09:41:14 SkyScan query 09:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.76<-13184 Statuses=0008 0009 09:41:15 Msec=4500 True Az=112.995 Ze=-17.76 Az status=0008 Ze status=0009 09:41:15 Check angles 09:41:15 SkyScan query 09:41:15 SkyScan query done: ret=0 az=112.995<-7533 ze=3.195<-11787 Statuses=0008 0009 09:41:15 Msec=5250 True Az=112.995 Ze=3.195 Az status=0008 Ze status=0009 09:41:16 Check angles 09:41:16 SkyScan query 09:41:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:41:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:41:16 Message to Master queued w/err=0: serial=272800 error=0 09:41:21 Received message from Master: op=Filter serial=272801 09:41:21 Color wheel filter change from 0 to 0 09:41:21 FLIGetFilterPos err=0 currentPosition=0 09:41:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:21 Filter is already there-color wheel unchanged 09:41:21 Received message from Master: op=Shutter serial=272802 09:41:21 Shutter LASER close 09:41:21 Received message from Camera: op=State serial=272804 09:41:21 GetSingleValue result=40 Value=cccccccc 09:41:21 SkyScan query 09:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:41:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:22 Parameters OK 09:41:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:22 Set A/D data flow result=40 09:41:22 Set A/D channel type result=40 09:41:22 Set A/D encoding result=40 09:41:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:22 Set channel filter=0.000000e+000 result=40 09:41:22 Config A/D Result=40 09:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:22 Get A/D filter: -9.255963e+061 result=40 09:41:22 Get A/D value=-858993460 result=40 09:41:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:22 Parameters OK 09:41:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:22 Set A/D data flow result=40 09:41:22 Set A/D channel type result=40 09:41:22 Set A/D encoding result=40 09:41:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:22 Set channel filter=0.000000e+000 result=40 09:41:22 Config A/D Result=40 09:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:22 Get A/D filter: -9.255963e+061 result=40 09:41:22 Get A/D value=-858993460 result=40 09:41:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:22 Aux= 09:41:22 Message to Camera, serial 272804 queued 09:41:59 Received message from Master: op=PointingHead serial=272817 09:41:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:41:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:41:59 Point started: ret=0 09:41:59 point_skyscan result=0 09:42:00 Check angles 09:42:00 SkyScan query 09:42:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:42:01 Message to Master queued w/err=0: serial=272817 error=0 09:42:06 Received message from Master: op=Filter serial=272818 09:42:06 Color wheel filter change from 0 to 0 09:42:06 FLIGetFilterPos err=0 currentPosition=0 09:42:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:06 Filter is already there-color wheel unchanged 09:42:06 Received message from Master: op=Shutter serial=272819 09:42:06 Shutter LASER close 09:42:06 Received message from Camera: op=State serial=272821 09:42:06 GetSingleValue result=40 Value=cccccccc 09:42:06 SkyScan query 09:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:42:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:06 Parameters OK 09:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:06 Set A/D data flow result=40 09:42:06 Set A/D channel type result=40 09:42:06 Set A/D encoding result=40 09:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:06 Set channel filter=0.000000e+000 result=40 09:42:06 Config A/D Result=40 09:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:06 Get A/D filter: -9.255963e+061 result=40 09:42:06 Get A/D value=-858993460 result=40 09:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:06 Parameters OK 09:42:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:06 Set A/D data flow result=40 09:42:06 Set A/D channel type result=40 09:42:06 Set A/D encoding result=40 09:42:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:06 Set channel filter=0.000000e+000 result=40 09:42:06 Config A/D Result=40 09:42:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:06 Get A/D filter: -9.255963e+061 result=40 09:42:06 Get A/D value=-858993460 result=40 09:42:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:06 Aux= 09:42:06 Message to Camera, serial 272821 queued 09:42:42 Received message from Master: op=PointingHead serial=272833 09:42:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:42:42 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:42:43 Point started: ret=0 09:42:43 point_skyscan result=0 09:42:43 Check angles 09:42:43 SkyScan query 09:42:44 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 09:42:44 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 09:42:44 Check angles 09:42:44 SkyScan query 09:42:45 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 09:42:45 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 09:42:45 Check angles 09:42:45 SkyScan query 09:42:45 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 09:42:45 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 09:42:46 Check angles 09:42:46 SkyScan query 09:42:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:42:46 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:42:46 Message to Master queued w/err=0: serial=272833 error=0 09:42:51 Received message from Master: op=Filter serial=272834 09:42:51 Color wheel filter change from 0 to 0 09:42:51 FLIGetFilterPos err=0 currentPosition=0 09:42:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:51 Filter is already there-color wheel unchanged 09:42:51 Received message from Master: op=Shutter serial=272835 09:42:51 Shutter LASER close 09:42:51 Received message from Camera: op=State serial=272837 09:42:51 GetSingleValue result=40 Value=cccccccc 09:42:51 SkyScan query 09:42:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:42:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:52 Parameters OK 09:42:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:52 Set A/D data flow result=40 09:42:52 Set A/D channel type result=40 09:42:52 Set A/D encoding result=40 09:42:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:52 Set channel filter=0.000000e+000 result=40 09:42:52 Config A/D Result=40 09:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:52 Get A/D filter: -9.255963e+061 result=40 09:42:52 Get A/D value=-858993460 result=40 09:42:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:52 Parameters OK 09:42:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:52 Set A/D data flow result=40 09:42:52 Set A/D channel type result=40 09:42:52 Set A/D encoding result=40 09:42:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:52 Set channel filter=0.000000e+000 result=40 09:42:52 Config A/D Result=40 09:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:52 Get A/D filter: -9.255963e+061 result=40 09:42:52 Get A/D value=-858993460 result=40 09:42:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:52 Aux= 09:42:52 Message to Camera, serial 272837 queued 09:43:28 Received message from Master: op=PointingHead serial=272849 09:43:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:43:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:43:28 Point started: ret=0 09:43:28 point_skyscan result=0 09:43:29 Check angles 09:43:29 SkyScan query 09:43:30 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 09:43:30 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 09:43:30 Check angles 09:43:30 SkyScan query 09:43:30 SkyScan query done: ret=0 az=135.495<-9033 ze=6.495<-11567 Statuses=0009 0008 09:43:30 Msec=750 True Az=135.495 Ze=6.495 Az status=0009 Ze status=0008 09:43:30 Check angles 09:43:30 SkyScan query 09:43:31 SkyScan query done: ret=0 az=117.81<-7854 ze=6.495<-11567 Statuses=0009 0008 09:43:31 Msec=1500 True Az=117.81 Ze=6.495 Az status=0009 Ze status=0008 09:43:31 Check angles 09:43:31 SkyScan query 09:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:32 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:43:32 Message to Master queued w/err=0: serial=272849 error=0 09:43:37 Received message from Master: op=Filter serial=272850 09:43:37 Color wheel filter change from 0 to 0 09:43:37 FLIGetFilterPos err=0 currentPosition=0 09:43:37 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:37 Filter is already there-color wheel unchanged 09:43:37 Received message from Master: op=Shutter serial=272851 09:43:37 Shutter LASER close 09:43:37 Received message from Camera: op=State serial=272853 09:43:37 GetSingleValue result=40 Value=cccccccc 09:43:37 SkyScan query 09:43:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:43:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:38 Parameters OK 09:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:38 Set A/D data flow result=40 09:43:38 Set A/D channel type result=40 09:43:38 Set A/D encoding result=40 09:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:38 Set channel filter=0.000000e+000 result=40 09:43:38 Config A/D Result=40 09:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:38 Get A/D filter: -9.255963e+061 result=40 09:43:38 Get A/D value=-858993460 result=40 09:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:38 Parameters OK 09:43:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:38 Set A/D data flow result=40 09:43:38 Set A/D channel type result=40 09:43:38 Set A/D encoding result=40 09:43:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:38 Set channel filter=0.000000e+000 result=40 09:43:38 Config A/D Result=40 09:43:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:38 Get A/D filter: -9.255963e+061 result=40 09:43:38 Get A/D value=-858993460 result=40 09:43:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:38 Aux= 09:43:38 Message to Camera, serial 272853 queued [UTC 2019-3-14 09:43:48] 09:44:14 Received message from Master: op=PointingHead serial=272866 09:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:44:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:44:15 Point started: ret=0 09:44:15 point_skyscan result=0 09:44:16 Check angles 09:44:16 SkyScan query 09:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 09:44:16 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 09:44:16 Check angles 09:44:16 SkyScan query 09:44:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 09:44:17 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 09:44:17 Check angles 09:44:17 SkyScan query 09:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 09:44:18 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 09:44:18 Check angles 09:44:18 SkyScan query 09:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.445<-17763 Statuses=0008 0009 09:44:18 Msec=2250 True Az=112.995 Ze=-86.445 Az status=0008 Ze status=0009 09:44:19 Check angles 09:44:19 SkyScan query 09:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 09:44:19 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 09:44:19 Check angles 09:44:19 SkyScan query 09:44:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.34<-20556 Statuses=0008 0009 09:44:20 Msec=3750 True Az=112.995 Ze=-128.34 Az status=0008 Ze status=0009 09:44:20 Check angles 09:44:20 SkyScan query 09:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.34<-21956 Statuses=0008 0009 09:44:21 Msec=4500 True Az=112.995 Ze=-149.34 Az status=0008 Ze status=0009 09:44:21 Check angles 09:44:21 SkyScan query 09:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.265<-23351 Statuses=0008 0009 09:44:21 Msec=5250 True Az=112.995 Ze=-170.265 Az status=0008 Ze status=0009 09:44:22 Check angles 09:44:22 SkyScan query 09:44:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:44:22 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:44:22 Message to Master queued w/err=0: serial=272866 error=0 09:44:27 Received message from Master: op=Filter serial=272867 09:44:27 Color wheel filter change from 0 to 0 09:44:27 FLIGetFilterPos err=0 currentPosition=0 09:44:27 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:27 Filter is already there-color wheel unchanged 09:44:27 Received message from Master: op=Shutter serial=272868 09:44:27 Shutter LASER open 09:44:27 Received message from Camera: op=State serial=272870 09:44:27 GetSingleValue result=40 Value=cccccccc 09:44:27 SkyScan query 09:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:44:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:28 Parameters OK 09:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:28 Set A/D data flow result=40 09:44:28 Set A/D channel type result=40 09:44:28 Set A/D encoding result=40 09:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:28 Set channel filter=0.000000e+000 result=40 09:44:28 Config A/D Result=40 09:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:28 Get A/D filter: -9.255963e+061 result=40 09:44:28 Get A/D value=-858993460 result=40 09:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:28 Parameters OK 09:44:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:28 Set A/D data flow result=40 09:44:28 Set A/D channel type result=40 09:44:28 Set A/D encoding result=40 09:44:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:28 Set channel filter=0.000000e+000 result=40 09:44:28 Config A/D Result=40 09:44:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:28 Get A/D filter: -9.255963e+061 result=40 09:44:28 Get A/D value=-858993460 result=40 09:44:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:28 Aux= 09:44:28 Message to Camera, serial 272870 queued 09:44:36 Received message from Master: op=Shutter serial=272880 09:44:36 Shutter LASER close 09:44:37 Received message from Master: op=PointingHead serial=272884 09:44:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:44:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:44:37 Point started: ret=0 09:44:37 point_skyscan result=0 09:44:38 Check angles 09:44:38 SkyScan query 09:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 09:44:39 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 09:44:39 Check angles 09:44:39 SkyScan query 09:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 09:44:39 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 09:44:40 Check angles 09:44:40 SkyScan query 09:44:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 09:44:40 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 09:44:40 Check angles 09:44:40 SkyScan query 09:44:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 09:44:41 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 09:44:41 Check angles 09:44:41 SkyScan query 09:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 09:44:42 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 09:44:42 Check angles 09:44:42 SkyScan query 09:44:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 09:44:42 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 09:44:43 Check angles 09:44:43 SkyScan query 09:44:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 09:44:43 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 09:44:43 Check angles 09:44:43 SkyScan query 09:44:44 SkyScan query done: ret=0 az=112.995<-7533 ze=4.065<-11729 Statuses=0008 0009 09:44:44 Msec=5250 True Az=112.995 Ze=4.065 Az status=0008 Ze status=0009 09:44:44 Check angles 09:44:44 SkyScan query 09:44:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:44:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:44:45 Message to Master queued w/err=0: serial=272884 error=0 09:44:50 Received message from Master: op=Filter serial=272885 09:44:50 Color wheel filter change from 0 to 0 09:44:50 FLIGetFilterPos err=0 currentPosition=0 09:44:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:50 Filter is already there-color wheel unchanged 09:44:50 Received message from Master: op=Shutter serial=272886 09:44:50 Shutter LASER close 09:44:50 Received message from Camera: op=State serial=272888 09:44:50 GetSingleValue result=40 Value=cccccccc 09:44:50 SkyScan query 09:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:44:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:51 Parameters OK 09:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:51 Set A/D data flow result=40 09:44:51 Set A/D channel type result=40 09:44:51 Set A/D encoding result=40 09:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:51 Set channel filter=0.000000e+000 result=40 09:44:51 Config A/D Result=40 09:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:51 Get A/D filter: -9.255963e+061 result=40 09:44:51 Get A/D value=-858993460 result=40 09:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:51 Parameters OK 09:44:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:51 Set A/D data flow result=40 09:44:51 Set A/D channel type result=40 09:44:51 Set A/D encoding result=40 09:44:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:51 Set channel filter=0.000000e+000 result=40 09:44:51 Config A/D Result=40 09:44:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:51 Get A/D filter: -9.255963e+061 result=40 09:44:51 Get A/D value=-858993460 result=40 09:44:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:51 Aux= 09:44:51 Message to Camera, serial 272888 queued 09:45:27 Received message from Master: op=PointingHead serial=272901 09:45:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:45:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:45:28 Point started: ret=0 09:45:28 point_skyscan result=0 09:45:28 Check angles 09:45:28 SkyScan query 09:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:45:29 Message to Master queued w/err=0: serial=272901 error=0 09:45:34 Received message from Master: op=Filter serial=272902 09:45:34 Color wheel filter change from 0 to 0 09:45:34 FLIGetFilterPos err=0 currentPosition=0 09:45:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:34 Filter is already there-color wheel unchanged 09:45:34 Received message from Master: op=Shutter serial=272903 09:45:34 Shutter LASER close 09:45:34 Received message from Camera: op=State serial=272905 09:45:34 GetSingleValue result=40 Value=cccccccc 09:45:34 SkyScan query 09:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:45:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:35 Parameters OK 09:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:35 Set A/D data flow result=40 09:45:35 Set A/D channel type result=40 09:45:35 Set A/D encoding result=40 09:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:35 Set channel filter=0.000000e+000 result=40 09:45:35 Config A/D Result=40 09:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:35 Get A/D filter: -9.255963e+061 result=40 09:45:35 Get A/D value=-858993460 result=40 09:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:35 Parameters OK 09:45:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:35 Set A/D data flow result=40 09:45:35 Set A/D channel type result=40 09:45:35 Set A/D encoding result=40 09:45:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:35 Set channel filter=0.000000e+000 result=40 09:45:35 Config A/D Result=40 09:45:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:35 Get A/D filter: -9.255963e+061 result=40 09:45:35 Get A/D value=-858993460 result=40 09:45:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:35 Aux= 09:45:35 Message to Camera, serial 272905 queued 09:46:12 Received message from Master: op=PointingHead serial=272918 09:46:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:46:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:46:12 Point started: ret=0 09:46:12 point_skyscan result=0 09:46:13 Check angles 09:46:13 SkyScan query 09:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:46:13 Message to Master queued w/err=0: serial=272918 error=0 09:46:18 Received message from Master: op=Filter serial=272919 09:46:18 Color wheel filter change from 0 to 0 09:46:18 FLIGetFilterPos err=0 currentPosition=0 09:46:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:18 Filter is already there-color wheel unchanged 09:46:19 Received message from Master: op=Shutter serial=272920 09:46:19 Shutter LASER close 09:46:19 Received message from Camera: op=State serial=272922 09:46:19 GetSingleValue result=40 Value=cccccccc 09:46:19 SkyScan query 09:46:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:19 Parameters OK 09:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:19 Set A/D data flow result=40 09:46:19 Set A/D channel type result=40 09:46:19 Set A/D encoding result=40 09:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:19 Set channel filter=0.000000e+000 result=40 09:46:19 Config A/D Result=40 09:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:19 Get A/D filter: -9.255963e+061 result=40 09:46:19 Get A/D value=-858993460 result=40 09:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:19 Parameters OK 09:46:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:19 Set A/D data flow result=40 09:46:19 Set A/D channel type result=40 09:46:19 Set A/D encoding result=40 09:46:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:19 Set channel filter=0.000000e+000 result=40 09:46:19 Config A/D Result=40 09:46:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:19 Get A/D filter: -9.255963e+061 result=40 09:46:19 Get A/D value=-858993460 result=40 09:46:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:19 Aux= 09:46:19 Message to Camera, serial 272922 queued 09:46:56 Received message from Master: op=PointingHead serial=272935 09:46:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:46:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:46:56 Point started: ret=0 09:46:56 point_skyscan result=0 09:46:57 Check angles 09:46:57 SkyScan query 09:46:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:46:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:46:58 Message to Master queued w/err=0: serial=272935 error=0 09:47:03 Received message from Master: op=Filter serial=272936 09:47:03 Color wheel filter change from 0 to 0 09:47:03 FLIGetFilterPos err=0 currentPosition=0 09:47:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:03 Filter is already there-color wheel unchanged 09:47:03 Received message from Master: op=Shutter serial=272937 09:47:03 Shutter LASER close 09:47:03 Received message from Camera: op=State serial=272939 09:47:03 GetSingleValue result=40 Value=cccccccc 09:47:03 SkyScan query 09:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:47:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:03 Parameters OK 09:47:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:03 Set A/D data flow result=40 09:47:03 Set A/D channel type result=40 09:47:03 Set A/D encoding result=40 09:47:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:03 Set channel filter=0.000000e+000 result=40 09:47:03 Config A/D Result=40 09:47:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:03 Get A/D filter: -9.255963e+061 result=40 09:47:03 Get A/D value=-858993460 result=40 09:47:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:03 Parameters OK 09:47:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:03 Set A/D data flow result=40 09:47:03 Set A/D channel type result=40 09:47:03 Set A/D encoding result=40 09:47:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:03 Set channel filter=0.000000e+000 result=40 09:47:03 Config A/D Result=40 09:47:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:03 Get A/D filter: -9.255963e+061 result=40 09:47:03 Get A/D value=-858993460 result=40 09:47:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:03 Aux= 09:47:03 Message to Camera, serial 272939 queued 09:47:40 Received message from Master: op=PointingHead serial=272952 09:47:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:47:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:47:41 Point started: ret=0 09:47:41 point_skyscan result=0 09:47:41 Check angles 09:47:41 SkyScan query 09:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.04<-13536 Statuses=0008 0009 09:47:42 Msec=0 True Az=112.995 Ze=-23.04 Az status=0008 Ze status=0009 09:47:42 Check angles 09:47:42 SkyScan query 09:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 09:47:43 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 09:47:43 Check angles 09:47:43 SkyScan query 09:47:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.37<-16358 Statuses=0008 0009 09:47:43 Msec=1500 True Az=112.995 Ze=-65.37 Az status=0008 Ze status=0009 09:47:44 Check angles 09:47:44 SkyScan query 09:47:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 09:47:44 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 09:47:44 Check angles 09:47:44 SkyScan query 09:47:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.265<-19151 Statuses=0008 0009 09:47:45 Msec=3000 True Az=112.995 Ze=-107.265 Az status=0008 Ze status=0009 09:47:45 Check angles 09:47:45 SkyScan query 09:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 09:47:46 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 09:47:46 Check angles 09:47:46 SkyScan query 09:47:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.205<-21947 Statuses=0008 0009 09:47:46 Msec=4500 True Az=112.995 Ze=-149.205 Az status=0008 Ze status=0009 09:47:47 Check angles 09:47:47 SkyScan query 09:47:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 09:47:47 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 09:47:47 Check angles 09:47:47 SkyScan query 09:47:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:47:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:47:48 Message to Master queued w/err=0: serial=272952 error=0 09:47:53 Received message from Master: op=Filter serial=272953 09:47:53 Color wheel filter change from 0 to 0 09:47:53 FLIGetFilterPos err=0 currentPosition=0 09:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:53 Filter is already there-color wheel unchanged 09:47:53 Received message from Master: op=Shutter serial=272954 09:47:53 Shutter LASER open 09:47:53 Received message from Camera: op=State serial=272956 09:47:53 GetSingleValue result=40 Value=cccccccc 09:47:53 SkyScan query 09:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:47:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:54 Parameters OK 09:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:54 Set A/D data flow result=40 09:47:54 Set A/D channel type result=40 09:47:54 Set A/D encoding result=40 09:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:54 Set channel filter=0.000000e+000 result=40 09:47:54 Config A/D Result=40 09:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:54 Get A/D filter: -9.255963e+061 result=40 09:47:54 Get A/D value=-858993460 result=40 09:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:54 Parameters OK 09:47:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:54 Set A/D data flow result=40 09:47:54 Set A/D channel type result=40 09:47:54 Set A/D encoding result=40 09:47:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:54 Set channel filter=0.000000e+000 result=40 09:47:54 Config A/D Result=40 09:47:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:54 Get A/D filter: -9.255963e+061 result=40 09:47:54 Get A/D value=-858993460 result=40 09:47:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:54 Aux= 09:47:54 Message to Camera, serial 272956 queued 09:48:01 Received message from Master: op=Shutter serial=272965 09:48:01 Shutter LASER close 09:48:02 Received message from Master: op=PointingHead serial=272969 09:48:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:02 Point started: ret=0 09:48:02 point_skyscan result=0 09:48:03 Check angles 09:48:03 SkyScan query 09:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 09:48:04 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 09:48:04 Check angles 09:48:04 SkyScan query 09:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 09:48:04 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 09:48:05 Check angles 09:48:05 SkyScan query 09:48:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 09:48:05 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 09:48:05 Check angles 09:48:05 SkyScan query 09:48:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 09:48:06 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 09:48:06 Check angles 09:48:06 SkyScan query 09:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 09:48:07 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 09:48:07 Check angles 09:48:07 SkyScan query 09:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.725<-14515 Statuses=0008 0009 09:48:07 Msec=3750 True Az=112.995 Ze=-37.725 Az status=0008 Ze status=0009 09:48:08 Check angles 09:48:08 SkyScan query 09:48:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.77<-13118 Statuses=0008 0009 09:48:08 Msec=4500 True Az=112.995 Ze=-16.77 Az status=0008 Ze status=0009 09:48:08 Check angles 09:48:08 SkyScan query 09:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.455<-11703 Statuses=0008 0009 09:48:09 Msec=5250 True Az=112.995 Ze=4.455 Az status=0008 Ze status=0009 09:48:09 Check angles 09:48:09 SkyScan query 09:48:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:48:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:48:10 Message to Master queued w/err=0: serial=272969 error=0 09:48:15 Received message from Master: op=Filter serial=272970 09:48:15 Color wheel filter change from 0 to 0 09:48:15 FLIGetFilterPos err=0 currentPosition=0 09:48:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:15 Filter is already there-color wheel unchanged 09:48:15 Received message from Master: op=Shutter serial=272971 09:48:15 Shutter LASER close 09:48:15 Received message from Camera: op=State serial=272973 09:48:15 GetSingleValue result=40 Value=cccccccc 09:48:15 SkyScan query 09:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:16 Parameters OK 09:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:16 Set A/D data flow result=40 09:48:16 Set A/D channel type result=40 09:48:16 Set A/D encoding result=40 09:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:16 Set channel filter=0.000000e+000 result=40 09:48:16 Config A/D Result=40 09:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:16 Get A/D filter: -9.255963e+061 result=40 09:48:16 Get A/D value=-858993460 result=40 09:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:16 Parameters OK 09:48:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:16 Set A/D data flow result=40 09:48:16 Set A/D channel type result=40 09:48:16 Set A/D encoding result=40 09:48:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:16 Set channel filter=0.000000e+000 result=40 09:48:16 Config A/D Result=40 09:48:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:16 Get A/D filter: -9.255963e+061 result=40 09:48:16 Get A/D value=-858993460 result=40 09:48:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:16 Aux= 09:48:16 Message to Camera, serial 272973 queued 09:48:52 Received message from Master: op=PointingHead serial=272986 09:48:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:48:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:48:53 Point started: ret=0 09:48:53 point_skyscan result=0 09:48:54 Check angles 09:48:54 SkyScan query 09:48:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:48:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:48:54 Message to Master queued w/err=0: serial=272986 error=0 09:48:59 Received message from Master: op=Filter serial=272987 09:48:59 Color wheel filter change from 0 to 0 09:48:59 FLIGetFilterPos err=0 currentPosition=0 09:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:59 Filter is already there-color wheel unchanged 09:48:59 Received message from Master: op=Shutter serial=272988 09:48:59 Shutter LASER close 09:48:59 Received message from Camera: op=State serial=272990 09:48:59 GetSingleValue result=40 Value=cccccccc 09:48:59 SkyScan query 09:49:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:00 Parameters OK 09:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:00 Set A/D data flow result=40 09:49:00 Set A/D channel type result=40 09:49:00 Set A/D encoding result=40 09:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:00 Set channel filter=0.000000e+000 result=40 09:49:00 Config A/D Result=40 09:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:00 Get A/D filter: -9.255963e+061 result=40 09:49:00 Get A/D value=-858993460 result=40 09:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:00 Parameters OK 09:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:00 Set A/D data flow result=40 09:49:00 Set A/D channel type result=40 09:49:00 Set A/D encoding result=40 09:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:00 Set channel filter=0.000000e+000 result=40 09:49:00 Config A/D Result=40 09:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:00 Get A/D filter: -9.255963e+061 result=40 09:49:00 Get A/D value=-858993460 result=40 09:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:00 Aux= 09:49:00 Message to Camera, serial 272990 queued 09:49:37 Received message from Master: op=PointingHead serial=273003 09:49:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:49:37 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:49:37 Point started: ret=0 09:49:37 point_skyscan result=0 09:49:38 Check angles 09:49:38 SkyScan query 09:49:38 SkyScan query done: ret=0 az=136.44<-9096 ze=-6.51<-12434 Statuses=0009 0008 09:49:38 Msec=0 True Az=136.44 Ze=-6.51 Az status=0009 Ze status=0008 09:49:39 Check angles 09:49:39 SkyScan query 09:49:39 SkyScan query done: ret=0 az=154.155<-10277 ze=-6.495<-12433 Statuses=0009 0008 09:49:39 Msec=750 True Az=154.155 Ze=-6.495 Az status=0009 Ze status=0008 09:49:39 Check angles 09:49:39 SkyScan query 09:49:40 SkyScan query done: ret=0 az=171.66<-11444 ze=-6.495<-12433 Statuses=0009 0008 09:49:40 Msec=1500 True Az=171.66 Ze=-6.495 Az status=0009 Ze status=0008 09:49:40 Check angles 09:49:40 SkyScan query 09:49:41 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:49:41 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:49:41 Message to Master queued w/err=0: serial=273003 error=0 09:49:46 Received message from Master: op=Filter serial=273004 09:49:46 Color wheel filter change from 0 to 0 09:49:46 FLIGetFilterPos err=0 currentPosition=0 09:49:46 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:46 Filter is already there-color wheel unchanged 09:49:46 Received message from Master: op=Shutter serial=273005 09:49:46 Shutter LASER close 09:49:46 Received message from Camera: op=State serial=273007 09:49:46 GetSingleValue result=40 Value=cccccccc 09:49:46 SkyScan query 09:49:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:49:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:47 Parameters OK 09:49:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:47 Set A/D data flow result=40 09:49:47 Set A/D channel type result=40 09:49:47 Set A/D encoding result=40 09:49:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:47 Set channel filter=0.000000e+000 result=40 09:49:47 Config A/D Result=40 09:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:47 Get A/D filter: -9.255963e+061 result=40 09:49:47 Get A/D value=-858993460 result=40 09:49:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:47 Parameters OK 09:49:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:47 Set A/D data flow result=40 09:49:47 Set A/D channel type result=40 09:49:47 Set A/D encoding result=40 09:49:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:47 Set channel filter=0.000000e+000 result=40 09:49:47 Config A/D Result=40 09:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:47 Get A/D filter: -9.255963e+061 result=40 09:49:47 Get A/D value=-858993460 result=40 09:49:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:47 Aux= 09:49:47 Message to Camera, serial 273007 queued 09:50:23 Received message from Master: op=PointingHead serial=273020 09:50:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:50:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:50:24 Point started: ret=0 09:50:24 point_skyscan result=0 09:50:24 Check angles 09:50:24 SkyScan query 09:50:25 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 09:50:25 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 09:50:25 Check angles 09:50:25 SkyScan query 09:50:26 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 09:50:26 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 09:50:26 Check angles 09:50:26 SkyScan query 09:50:27 SkyScan query done: ret=0 az=117.63<-7842 ze=6.495<-11567 Statuses=0009 0008 09:50:27 Msec=1500 True Az=117.63 Ze=6.495 Az status=0009 Ze status=0008 09:50:27 Check angles 09:50:27 SkyScan query 09:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:27 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:50:27 Message to Master queued w/err=0: serial=273020 error=0 09:50:32 Received message from Master: op=Filter serial=273021 09:50:32 Color wheel filter change from 0 to 0 09:50:32 FLIGetFilterPos err=0 currentPosition=0 09:50:32 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:32 Filter is already there-color wheel unchanged 09:50:32 Received message from Master: op=Shutter serial=273022 09:50:32 Shutter LASER close 09:50:33 Received message from Camera: op=State serial=273024 09:50:33 GetSingleValue result=40 Value=cccccccc 09:50:33 SkyScan query 09:50:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:50:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:33 Parameters OK 09:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:33 Set A/D data flow result=40 09:50:33 Set A/D channel type result=40 09:50:33 Set A/D encoding result=40 09:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:33 Set channel filter=0.000000e+000 result=40 09:50:33 Config A/D Result=40 09:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:33 Get A/D filter: -9.255963e+061 result=40 09:50:33 Get A/D value=-858993460 result=40 09:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:33 Parameters OK 09:50:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:33 Set A/D data flow result=40 09:50:33 Set A/D channel type result=40 09:50:33 Set A/D encoding result=40 09:50:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:33 Set channel filter=0.000000e+000 result=40 09:50:33 Config A/D Result=40 09:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:33 Get A/D filter: -9.255963e+061 result=40 09:50:33 Get A/D value=-858993460 result=40 09:50:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:33 Aux= 09:50:33 Message to Camera, serial 273024 queued 09:51:10 Received message from Master: op=PointingHead serial=273037 09:51:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:51:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:51:10 Point started: ret=0 09:51:10 point_skyscan result=0 09:51:11 Check angles 09:51:11 SkyScan query 09:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 09:51:12 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 09:51:12 Check angles 09:51:12 SkyScan query 09:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.865<-14991 Statuses=0008 0009 09:51:12 Msec=750 True Az=112.995 Ze=-44.865 Az status=0008 Ze status=0009 09:51:13 Check angles 09:51:13 SkyScan query 09:51:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.85<-16390 Statuses=0008 0009 09:51:13 Msec=1500 True Az=112.995 Ze=-65.85 Az status=0008 Ze status=0009 09:51:13 Check angles 09:51:13 SkyScan query 09:51:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 09:51:14 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 09:51:14 Check angles 09:51:14 SkyScan query 09:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 09:51:15 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 09:51:15 Check angles 09:51:15 SkyScan query 09:51:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.715<-20581 Statuses=0008 0009 09:51:15 Msec=3750 True Az=112.995 Ze=-128.715 Az status=0008 Ze status=0009 09:51:16 Check angles 09:51:16 SkyScan query 09:51:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 09:51:16 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 09:51:16 Check angles 09:51:16 SkyScan query 09:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 09:51:17 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 09:51:17 Check angles 09:51:17 SkyScan query 09:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:51:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:51:18 Message to Master queued w/err=0: serial=273037 error=0 09:51:23 Received message from Master: op=Filter serial=273038 09:51:23 Color wheel filter change from 0 to 0 09:51:23 FLIGetFilterPos err=0 currentPosition=0 09:51:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:23 Filter is already there-color wheel unchanged 09:51:23 Received message from Master: op=Shutter serial=273039 09:51:23 Shutter LASER open 09:51:23 Received message from Camera: op=State serial=273041 09:51:23 GetSingleValue result=40 Value=cccccccc 09:51:23 SkyScan query 09:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:51:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:24 Parameters OK 09:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:24 Set A/D data flow result=40 09:51:24 Set A/D channel type result=40 09:51:24 Set A/D encoding result=40 09:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:24 Set channel filter=0.000000e+000 result=40 09:51:24 Config A/D Result=40 09:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:24 Get A/D filter: -9.255963e+061 result=40 09:51:24 Get A/D value=-858993460 result=40 09:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:24 Parameters OK 09:51:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:24 Set A/D data flow result=40 09:51:24 Set A/D channel type result=40 09:51:24 Set A/D encoding result=40 09:51:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:24 Set channel filter=0.000000e+000 result=40 09:51:24 Config A/D Result=40 09:51:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:24 Get A/D filter: -9.255963e+061 result=40 09:51:24 Get A/D value=-858993460 result=40 09:51:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:24 Aux= 09:51:24 Message to Camera, serial 273041 queued 09:51:32 Received message from Master: op=Shutter serial=273051 09:51:32 Shutter LASER close 09:51:32 Received message from Master: op=PointingHead serial=273055 09:51:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:51:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:51:33 Point started: ret=0 09:51:33 point_skyscan result=0 09:51:34 Check angles 09:51:34 SkyScan query 09:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 09:51:34 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 09:51:34 Check angles 09:51:34 SkyScan query 09:51:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.635<-20109 Statuses=0008 0009 09:51:35 Msec=750 True Az=112.995 Ze=-121.635 Az status=0008 Ze status=0009 09:51:35 Check angles 09:51:35 SkyScan query 09:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 09:51:36 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 09:51:36 Check angles 09:51:36 SkyScan query 09:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.275<-17285 Statuses=0008 0009 09:51:36 Msec=2250 True Az=112.995 Ze=-79.275 Az status=0008 Ze status=0009 09:51:37 Check angles 09:51:37 SkyScan query 09:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.915<-15861 Statuses=0008 0009 09:51:37 Msec=3000 True Az=112.995 Ze=-57.915 Az status=0008 Ze status=0009 09:51:37 Check angles 09:51:37 SkyScan query 09:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.005<-14467 Statuses=0008 0009 09:51:38 Msec=3750 True Az=112.995 Ze=-37.005 Az status=0008 Ze status=0009 09:51:38 Check angles 09:51:38 SkyScan query 09:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.005<-13067 Statuses=0008 0009 09:51:39 Msec=4500 True Az=112.995 Ze=-16.005 Az status=0008 Ze status=0009 09:51:39 Check angles 09:51:39 SkyScan query 09:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=4.725<-11685 Statuses=0008 0009 09:51:39 Msec=5250 True Az=112.995 Ze=4.725 Az status=0008 Ze status=0009 09:51:40 Check angles 09:51:40 SkyScan query 09:51:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:51:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:51:40 Message to Master queued w/err=0: serial=273055 error=0 09:51:45 Received message from Master: op=Filter serial=273056 09:51:45 Color wheel filter change from 0 to 0 09:51:45 FLIGetFilterPos err=0 currentPosition=0 09:51:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:45 Filter is already there-color wheel unchanged 09:51:45 Received message from Master: op=Shutter serial=273057 09:51:45 Shutter LASER close 09:51:45 Received message from Camera: op=State serial=273059 09:51:45 GetSingleValue result=40 Value=cccccccc 09:51:45 SkyScan query 09:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:51:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:46 Parameters OK 09:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:46 Set A/D data flow result=40 09:51:46 Set A/D channel type result=40 09:51:46 Set A/D encoding result=40 09:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:46 Set channel filter=0.000000e+000 result=40 09:51:46 Config A/D Result=40 09:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:46 Get A/D filter: -9.255963e+061 result=40 09:51:46 Get A/D value=-858993460 result=40 09:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:46 Parameters OK 09:51:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:46 Set A/D data flow result=40 09:51:46 Set A/D channel type result=40 09:51:46 Set A/D encoding result=40 09:51:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:46 Set channel filter=0.000000e+000 result=40 09:51:46 Config A/D Result=40 09:51:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:46 Get A/D filter: -9.255963e+061 result=40 09:51:46 Get A/D value=-858993460 result=40 09:51:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:46 Aux= 09:51:46 Message to Camera, serial 273059 queued 09:52:23 Received message from Master: op=PointingHead serial=273072 09:52:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:52:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:52:23 Point started: ret=0 09:52:23 point_skyscan result=0 09:52:24 Check angles 09:52:24 SkyScan query 09:52:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:52:25 Message to Master queued w/err=0: serial=273072 error=0 09:52:30 Received message from Master: op=Filter serial=273073 09:52:30 Color wheel filter change from 0 to 0 09:52:30 FLIGetFilterPos err=0 currentPosition=0 09:52:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:30 Filter is already there-color wheel unchanged 09:52:30 Received message from Master: op=Shutter serial=273074 09:52:30 Shutter LASER close 09:52:30 Received message from Camera: op=State serial=273076 09:52:30 GetSingleValue result=40 Value=cccccccc 09:52:30 SkyScan query 09:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:52:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:30 Parameters OK 09:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:30 Set A/D data flow result=40 09:52:30 Set A/D channel type result=40 09:52:30 Set A/D encoding result=40 09:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:30 Set channel filter=0.000000e+000 result=40 09:52:30 Config A/D Result=40 09:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:30 Get A/D filter: -9.255963e+061 result=40 09:52:30 Get A/D value=-858993460 result=40 09:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:30 Parameters OK 09:52:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:30 Set A/D data flow result=40 09:52:30 Set A/D channel type result=40 09:52:30 Set A/D encoding result=40 09:52:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:30 Set channel filter=0.000000e+000 result=40 09:52:30 Config A/D Result=40 09:52:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:30 Get A/D filter: -9.255963e+061 result=40 09:52:30 Get A/D value=-858993460 result=40 09:52:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:30 Aux= 09:52:30 Message to Camera, serial 273076 queued 09:53:07 Received message from Master: op=PointingHead serial=273089 09:53:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:08 Point started: ret=0 09:53:08 point_skyscan result=0 09:53:08 Check angles 09:53:08 SkyScan query 09:53:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:53:09 Message to Master queued w/err=0: serial=273089 error=0 09:53:14 Received message from Master: op=Filter serial=273090 09:53:14 Color wheel filter change from 0 to 0 09:53:14 FLIGetFilterPos err=0 currentPosition=0 09:53:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:14 Filter is already there-color wheel unchanged 09:53:14 Received message from Master: op=Shutter serial=273091 09:53:14 Shutter LASER close 09:53:14 Received message from Camera: op=State serial=273093 09:53:14 GetSingleValue result=40 Value=cccccccc 09:53:14 SkyScan query 09:53:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:15 Parameters OK 09:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:15 Set A/D data flow result=40 09:53:15 Set A/D channel type result=40 09:53:15 Set A/D encoding result=40 09:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:15 Set channel filter=0.000000e+000 result=40 09:53:15 Config A/D Result=40 09:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:15 Get A/D filter: -9.255963e+061 result=40 09:53:15 Get A/D value=-858993460 result=40 09:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:15 Parameters OK 09:53:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:15 Set A/D data flow result=40 09:53:15 Set A/D channel type result=40 09:53:15 Set A/D encoding result=40 09:53:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:15 Set channel filter=0.000000e+000 result=40 09:53:15 Config A/D Result=40 09:53:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:15 Get A/D filter: -9.255963e+061 result=40 09:53:15 Get A/D value=-858993460 result=40 09:53:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:15 Aux= 09:53:15 Message to Camera, serial 273093 queued 09:53:52 Received message from Master: op=PointingHead serial=273106 09:53:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:53:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:53:52 Point started: ret=0 09:53:52 point_skyscan result=0 09:53:53 Check angles 09:53:53 SkyScan query 09:53:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:53:53 Message to Master queued w/err=0: serial=273106 error=0 09:53:58 Received message from Master: op=Filter serial=273107 09:53:58 Color wheel filter change from 0 to 0 09:53:58 FLIGetFilterPos err=0 currentPosition=0 09:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:58 Filter is already there-color wheel unchanged 09:53:58 Received message from Master: op=Shutter serial=273108 09:53:58 Shutter LASER close 09:53:58 Received message from Camera: op=State serial=273110 09:53:58 GetSingleValue result=40 Value=cccccccc 09:53:58 SkyScan query 09:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:53:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:59 Parameters OK 09:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:59 Set A/D data flow result=40 09:53:59 Set A/D channel type result=40 09:53:59 Set A/D encoding result=40 09:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:59 Set channel filter=0.000000e+000 result=40 09:53:59 Config A/D Result=40 09:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:59 Get A/D filter: -9.255963e+061 result=40 09:53:59 Get A/D value=-858993460 result=40 09:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:59 Parameters OK 09:53:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:59 Set A/D data flow result=40 09:53:59 Set A/D channel type result=40 09:53:59 Set A/D encoding result=40 09:53:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:59 Set channel filter=0.000000e+000 result=40 09:53:59 Config A/D Result=40 09:53:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:59 Get A/D filter: -9.255963e+061 result=40 09:53:59 Get A/D value=-858993460 result=40 09:53:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:59 Aux= 09:53:59 Message to Camera, serial 273110 queued 09:54:36 Received message from Master: op=PointingHead serial=273123 09:54:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:54:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:54:36 Point started: ret=0 09:54:36 point_skyscan result=0 09:54:37 Check angles 09:54:37 SkyScan query 09:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 09:54:38 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 09:54:38 Check angles 09:54:38 SkyScan query 09:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 [UTC 2019-3-14 09:54:38] 09:54:38 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 09:54:38 Check angles 09:54:38 SkyScan query 09:54:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.85<-16390 Statuses=0008 0009 09:54:39 Msec=1500 True Az=112.995 Ze=-65.85 Az status=0008 Ze status=0009 09:54:39 Check angles 09:54:39 SkyScan query 09:54:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.82<-17788 Statuses=0008 0009 09:54:40 Msec=2250 True Az=112.995 Ze=-86.82 Az status=0008 Ze status=0009 09:54:40 Check angles 09:54:40 SkyScan query 09:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.24<-19216 Statuses=0008 0009 09:54:41 Msec=3000 True Az=112.995 Ze=-108.24 Az status=0008 Ze status=0009 09:54:41 Check angles 09:54:41 SkyScan query 09:54:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.18<-20612 Statuses=0008 0009 09:54:41 Msec=3750 True Az=112.995 Ze=-129.18 Az status=0008 Ze status=0009 09:54:41 Check angles 09:54:41 SkyScan query 09:54:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.135<-22009 Statuses=0008 0009 09:54:42 Msec=4500 True Az=112.995 Ze=-150.135 Az status=0008 Ze status=0009 09:54:42 Check angles 09:54:42 SkyScan query 09:54:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 09:54:43 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 09:54:43 Check angles 09:54:43 SkyScan query 09:54:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:54:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:54:44 Message to Master queued w/err=0: serial=273123 error=0 09:54:49 Received message from Master: op=Filter serial=273124 09:54:49 Color wheel filter change from 0 to 0 09:54:49 FLIGetFilterPos err=0 currentPosition=0 09:54:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:49 Filter is already there-color wheel unchanged 09:54:49 Received message from Master: op=Shutter serial=273125 09:54:49 Shutter LASER open 09:54:49 Received message from Camera: op=State serial=273127 09:54:49 GetSingleValue result=40 Value=cccccccc 09:54:49 SkyScan query 09:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:54:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:49 Parameters OK 09:54:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:49 Set A/D data flow result=40 09:54:49 Set A/D channel type result=40 09:54:49 Set A/D encoding result=40 09:54:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:49 Set channel filter=0.000000e+000 result=40 09:54:49 Config A/D Result=40 09:54:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:49 Get A/D filter: -9.255963e+061 result=40 09:54:49 Get A/D value=-858993460 result=40 09:54:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:49 Parameters OK 09:54:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:49 Set A/D data flow result=40 09:54:49 Set A/D channel type result=40 09:54:49 Set A/D encoding result=40 09:54:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:49 Set channel filter=0.000000e+000 result=40 09:54:49 Config A/D Result=40 09:54:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:49 Get A/D filter: -9.255963e+061 result=40 09:54:49 Get A/D value=-858993460 result=40 09:54:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:49 Aux= 09:54:49 Message to Camera, serial 273127 queued 09:54:57 Received message from Master: op=Shutter serial=273136 09:54:57 Shutter LASER close 09:54:58 Received message from Master: op=PointingHead serial=273140 09:54:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:54:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:54:58 Point started: ret=0 09:54:58 point_skyscan result=0 09:54:59 Check angles 09:54:59 SkyScan query 09:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.52<-21568 Statuses=0008 0009 09:54:59 Msec=0 True Az=112.995 Ze=-143.52 Az status=0008 Ze status=0009 09:54:59 Check angles 09:54:59 SkyScan query 09:55:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 09:55:00 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 09:55:00 Check angles 09:55:00 SkyScan query 09:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 09:55:01 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 09:55:01 Check angles 09:55:01 SkyScan query 09:55:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.64<-17376 Statuses=0008 0009 09:55:01 Msec=2250 True Az=112.995 Ze=-80.64 Az status=0008 Ze status=0009 09:55:02 Check angles 09:55:02 SkyScan query 09:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.73<-15982 Statuses=0008 0009 09:55:02 Msec=3000 True Az=112.995 Ze=-59.73 Az status=0008 Ze status=0009 09:55:02 Check angles 09:55:02 SkyScan query 09:55:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.775<-14585 Statuses=0008 0009 09:55:03 Msec=3750 True Az=112.995 Ze=-38.775 Az status=0008 Ze status=0009 09:55:03 Check angles 09:55:03 SkyScan query 09:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.775<-13185 Statuses=0008 0009 09:55:04 Msec=4500 True Az=112.995 Ze=-17.775 Az status=0008 Ze status=0009 09:55:04 Check angles 09:55:04 SkyScan query 09:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=3.18<-11788 Statuses=0008 0009 09:55:04 Msec=5250 True Az=112.995 Ze=3.18 Az status=0008 Ze status=0009 09:55:05 Check angles 09:55:05 SkyScan query 09:55:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:55:05 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:55:05 Message to Master queued w/err=0: serial=273140 error=0 09:55:10 Received message from Master: op=Filter serial=273141 09:55:10 Color wheel filter change from 0 to 0 09:55:10 FLIGetFilterPos err=0 currentPosition=0 09:55:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:10 Filter is already there-color wheel unchanged 09:55:10 Received message from Master: op=Shutter serial=273142 09:55:10 Shutter LASER close 09:55:11 Received message from Camera: op=State serial=273144 09:55:11 GetSingleValue result=40 Value=cccccccc 09:55:11 SkyScan query 09:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:11 Parameters OK 09:55:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:11 Set A/D data flow result=40 09:55:11 Set A/D channel type result=40 09:55:11 Set A/D encoding result=40 09:55:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:11 Set channel filter=0.000000e+000 result=40 09:55:11 Config A/D Result=40 09:55:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:11 Get A/D filter: -9.255963e+061 result=40 09:55:11 Get A/D value=-858993460 result=40 09:55:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:11 Parameters OK 09:55:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:11 Set A/D data flow result=40 09:55:11 Set A/D channel type result=40 09:55:11 Set A/D encoding result=40 09:55:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:11 Set channel filter=0.000000e+000 result=40 09:55:11 Config A/D Result=40 09:55:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:11 Get A/D filter: -9.255963e+061 result=40 09:55:11 Get A/D value=-858993460 result=40 09:55:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:11 Aux= 09:55:11 Message to Camera, serial 273144 queued 09:55:48 Received message from Master: op=PointingHead serial=273157 09:55:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:55:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:55:48 Point started: ret=0 09:55:48 point_skyscan result=0 09:55:49 Check angles 09:55:49 SkyScan query 09:55:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:55:50 Message to Master queued w/err=0: serial=273157 error=0 09:55:55 Received message from Master: op=Filter serial=273158 09:55:55 Color wheel filter change from 0 to 0 09:55:55 FLIGetFilterPos err=0 currentPosition=0 09:55:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:55 Filter is already there-color wheel unchanged 09:55:55 Received message from Master: op=Shutter serial=273159 09:55:55 Shutter LASER close 09:55:55 Received message from Camera: op=State serial=273161 09:55:55 GetSingleValue result=40 Value=cccccccc 09:55:55 SkyScan query 09:55:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:55:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:55 Parameters OK 09:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:55 Set A/D data flow result=40 09:55:55 Set A/D channel type result=40 09:55:55 Set A/D encoding result=40 09:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:55 Set channel filter=0.000000e+000 result=40 09:55:55 Config A/D Result=40 09:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:55 Get A/D filter: -9.255963e+061 result=40 09:55:55 Get A/D value=-858993460 result=40 09:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:55 Parameters OK 09:55:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:55 Set A/D data flow result=40 09:55:55 Set A/D channel type result=40 09:55:55 Set A/D encoding result=40 09:55:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:55 Set channel filter=0.000000e+000 result=40 09:55:55 Config A/D Result=40 09:55:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:55 Get A/D filter: -9.255963e+061 result=40 09:55:55 Get A/D value=-858993460 result=40 09:55:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:55 Aux= 09:55:55 Message to Camera, serial 273161 queued 09:56:32 Received message from Master: op=PointingHead serial=273174 09:56:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 09:56:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 09:56:33 Point started: ret=0 09:56:33 point_skyscan result=0 09:56:33 Check angles 09:56:33 SkyScan query 09:56:34 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 09:56:34 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 09:56:34 Check angles 09:56:34 SkyScan query 09:56:35 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.495<-12433 Statuses=0009 0008 09:56:35 Msec=750 True Az=153.27 Ze=-6.495 Az status=0009 Ze status=0008 09:56:35 Check angles 09:56:35 SkyScan query 09:56:35 SkyScan query done: ret=0 az=170.73<-11382 ze=-6.495<-12433 Statuses=0009 0008 09:56:35 Msec=1500 True Az=170.73 Ze=-6.495 Az status=0009 Ze status=0008 09:56:36 Check angles 09:56:36 SkyScan query 09:56:36 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 09:56:36 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 09:56:36 Message to Master queued w/err=0: serial=273174 error=0 09:56:41 Received message from Master: op=Filter serial=273175 09:56:41 Color wheel filter change from 0 to 0 09:56:41 FLIGetFilterPos err=0 currentPosition=0 09:56:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:41 Filter is already there-color wheel unchanged 09:56:41 Received message from Master: op=Shutter serial=273176 09:56:41 Shutter LASER close 09:56:41 Received message from Camera: op=State serial=273178 09:56:41 GetSingleValue result=40 Value=cccccccc 09:56:41 SkyScan query 09:56:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 09:56:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:42 Parameters OK 09:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:42 Set A/D data flow result=40 09:56:42 Set A/D channel type result=40 09:56:42 Set A/D encoding result=40 09:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:42 Set channel filter=0.000000e+000 result=40 09:56:42 Config A/D Result=40 09:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:42 Get A/D filter: -9.255963e+061 result=40 09:56:42 Get A/D value=-858993460 result=40 09:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:42 Parameters OK 09:56:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:42 Set A/D data flow result=40 09:56:42 Set A/D channel type result=40 09:56:42 Set A/D encoding result=40 09:56:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:42 Set channel filter=0.000000e+000 result=40 09:56:42 Config A/D Result=40 09:56:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:42 Get A/D filter: -9.255963e+061 result=40 09:56:42 Get A/D value=-858993460 result=40 09:56:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:42 Aux= 09:56:42 Message to Camera, serial 273178 queued 09:57:19 Received message from Master: op=PointingHead serial=273191 09:57:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:57:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:57:19 Point started: ret=0 09:57:19 point_skyscan result=0 09:57:20 Check angles 09:57:20 SkyScan query 09:57:21 SkyScan query done: ret=0 az=153.195<-10213 ze=6.51<-11566 Statuses=0009 0008 09:57:21 Msec=0 True Az=153.195 Ze=6.51 Az status=0009 Ze status=0008 09:57:21 Check angles 09:57:21 SkyScan query 09:57:21 SkyScan query done: ret=0 az=135.735<-9049 ze=6.495<-11567 Statuses=0009 0008 09:57:21 Msec=750 True Az=135.735 Ze=6.495 Az status=0009 Ze status=0008 09:57:22 Check angles 09:57:22 SkyScan query 09:57:22 SkyScan query done: ret=0 az=118.23<-7882 ze=6.495<-11567 Statuses=0009 0008 09:57:22 Msec=1500 True Az=118.23 Ze=6.495 Az status=0009 Ze status=0008 09:57:22 Check angles 09:57:22 SkyScan query 09:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:23 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:57:23 Message to Master queued w/err=0: serial=273191 error=0 09:57:28 Received message from Master: op=Filter serial=273192 09:57:28 Color wheel filter change from 0 to 0 09:57:28 FLIGetFilterPos err=0 currentPosition=0 09:57:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:28 Filter is already there-color wheel unchanged 09:57:28 Received message from Master: op=Shutter serial=273193 09:57:28 Shutter LASER close 09:57:28 Received message from Camera: op=State serial=273195 09:57:28 GetSingleValue result=40 Value=cccccccc 09:57:28 SkyScan query 09:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:57:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:29 Parameters OK 09:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:29 Set A/D data flow result=40 09:57:29 Set A/D channel type result=40 09:57:29 Set A/D encoding result=40 09:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:29 Set channel filter=0.000000e+000 result=40 09:57:29 Config A/D Result=40 09:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:29 Get A/D filter: -9.255963e+061 result=40 09:57:29 Get A/D value=-858993460 result=40 09:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:29 Parameters OK 09:57:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:29 Set A/D data flow result=40 09:57:29 Set A/D channel type result=40 09:57:29 Set A/D encoding result=40 09:57:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:29 Set channel filter=0.000000e+000 result=40 09:57:29 Config A/D Result=40 09:57:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:29 Get A/D filter: -9.255963e+061 result=40 09:57:29 Get A/D value=-858993460 result=40 09:57:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:29 Aux= 09:57:29 Message to Camera, serial 273195 queued 09:58:05 Received message from Master: op=PointingHead serial=273208 09:58:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:58:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:58:06 Point started: ret=0 09:58:06 point_skyscan result=0 09:58:07 Check angles 09:58:07 SkyScan query 09:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 09:58:07 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 09:58:07 Check angles 09:58:07 SkyScan query 09:58:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 09:58:08 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 09:58:08 Check angles 09:58:08 SkyScan query 09:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.04<-16336 Statuses=0008 0009 09:58:09 Msec=1500 True Az=112.995 Ze=-65.04 Az status=0008 Ze status=0009 09:58:09 Check angles 09:58:09 SkyScan query 09:58:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 09:58:09 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 09:58:10 Check angles 09:58:10 SkyScan query 09:58:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.935<-19129 Statuses=0008 0009 09:58:10 Msec=3000 True Az=112.995 Ze=-106.935 Az status=0008 Ze status=0009 09:58:10 Check angles 09:58:10 SkyScan query 09:58:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.905<-20527 Statuses=0008 0009 09:58:11 Msec=3750 True Az=112.995 Ze=-127.905 Az status=0008 Ze status=0009 09:58:11 Check angles 09:58:11 SkyScan query 09:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.845<-21923 Statuses=0008 0009 09:58:12 Msec=4500 True Az=112.995 Ze=-148.845 Az status=0008 Ze status=0009 09:58:12 Check angles 09:58:12 SkyScan query 09:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.8<-23320 Statuses=0008 0009 09:58:12 Msec=5250 True Az=112.995 Ze=-169.8 Az status=0008 Ze status=0009 09:58:13 Check angles 09:58:13 SkyScan query 09:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:58:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:58:13 Message to Master queued w/err=0: serial=273208 error=0 09:58:18 Received message from Master: op=Filter serial=273209 09:58:18 Color wheel filter change from 0 to 0 09:58:18 FLIGetFilterPos err=0 currentPosition=0 09:58:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:18 Filter is already there-color wheel unchanged 09:58:18 Received message from Master: op=Shutter serial=273210 09:58:18 Shutter LASER open 09:58:18 Received message from Camera: op=State serial=273212 09:58:18 GetSingleValue result=40 Value=cccccccc 09:58:18 SkyScan query 09:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:19 Parameters OK 09:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:19 Set A/D data flow result=40 09:58:19 Set A/D channel type result=40 09:58:19 Set A/D encoding result=40 09:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:19 Set channel filter=0.000000e+000 result=40 09:58:19 Config A/D Result=40 09:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:19 Get A/D filter: -9.255963e+061 result=40 09:58:19 Get A/D value=-858993460 result=40 09:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:19 Parameters OK 09:58:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:19 Set A/D data flow result=40 09:58:19 Set A/D channel type result=40 09:58:19 Set A/D encoding result=40 09:58:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:19 Set channel filter=0.000000e+000 result=40 09:58:19 Config A/D Result=40 09:58:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:19 Get A/D filter: -9.255963e+061 result=40 09:58:19 Get A/D value=-858993460 result=40 09:58:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:19 Aux= 09:58:19 Message to Camera, serial 273212 queued 09:58:27 Received message from Master: op=Shutter serial=273222 09:58:27 Shutter LASER close 09:58:28 Received message from Master: op=PointingHead serial=273226 09:58:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:58:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:58:28 Point started: ret=0 09:58:28 point_skyscan result=0 09:58:29 Check angles 09:58:29 SkyScan query 09:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 09:58:30 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 09:58:30 Check angles 09:58:30 SkyScan query 09:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 09:58:30 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 09:58:31 Check angles 09:58:31 SkyScan query 09:58:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.905<-18727 Statuses=0008 0009 09:58:31 Msec=1500 True Az=112.995 Ze=-100.905 Az status=0008 Ze status=0009 09:58:31 Check angles 09:58:31 SkyScan query 09:58:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 09:58:32 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 09:58:32 Check angles 09:58:32 SkyScan query 09:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.98<-15932 Statuses=0008 0009 09:58:33 Msec=3000 True Az=112.995 Ze=-58.98 Az status=0008 Ze status=0009 09:58:33 Check angles 09:58:33 SkyScan query 09:58:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 09:58:33 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 09:58:34 Check angles 09:58:34 SkyScan query 09:58:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 09:58:34 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 09:58:34 Check angles 09:58:34 SkyScan query 09:58:35 SkyScan query done: ret=0 az=113.01<-7534 ze=4.29<-11714 Statuses=0008 0009 09:58:35 Msec=5250 True Az=113.01 Ze=4.29 Az status=0008 Ze status=0009 09:58:35 Check angles 09:58:35 SkyScan query 09:58:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 09:58:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 09:58:36 Message to Master queued w/err=0: serial=273226 error=0 09:58:41 Received message from Master: op=Filter serial=273227 09:58:41 Color wheel filter change from 0 to 0 09:58:41 FLIGetFilterPos err=0 currentPosition=0 09:58:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:41 Filter is already there-color wheel unchanged 09:58:41 Received message from Master: op=Shutter serial=273228 09:58:41 Shutter LASER close 09:58:41 Received message from Camera: op=State serial=273230 09:58:41 GetSingleValue result=40 Value=cccccccc 09:58:41 SkyScan query 09:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:58:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:42 Parameters OK 09:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:42 Set A/D data flow result=40 09:58:42 Set A/D channel type result=40 09:58:42 Set A/D encoding result=40 09:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:42 Set channel filter=0.000000e+000 result=40 09:58:42 Config A/D Result=40 09:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:42 Get A/D filter: -9.255963e+061 result=40 09:58:42 Get A/D value=-858993460 result=40 09:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:42 Parameters OK 09:58:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:42 Set A/D data flow result=40 09:58:42 Set A/D channel type result=40 09:58:42 Set A/D encoding result=40 09:58:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:42 Set channel filter=0.000000e+000 result=40 09:58:42 Config A/D Result=40 09:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:42 Get A/D filter: -9.255963e+061 result=40 09:58:42 Get A/D value=-858993460 result=40 09:58:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:42 Aux= 09:58:42 Message to Camera, serial 273230 queued 09:59:18 Received message from Master: op=PointingHead serial=273243 09:59:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 09:59:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 09:59:19 Point started: ret=0 09:59:19 point_skyscan result=0 09:59:19 Check angles 09:59:19 SkyScan query 09:59:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 09:59:20 Message to Master queued w/err=0: serial=273243 error=0 09:59:25 Received message from Master: op=Filter serial=273244 09:59:25 Color wheel filter change from 0 to 0 09:59:25 FLIGetFilterPos err=0 currentPosition=0 09:59:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:25 Filter is already there-color wheel unchanged 09:59:25 Received message from Master: op=Shutter serial=273245 09:59:25 Shutter LASER close 09:59:25 Received message from Camera: op=State serial=273247 09:59:25 GetSingleValue result=40 Value=cccccccc 09:59:25 SkyScan query 09:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 09:59:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:26 Parameters OK 09:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:26 Set A/D data flow result=40 09:59:26 Set A/D channel type result=40 09:59:26 Set A/D encoding result=40 09:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:26 Set channel filter=0.000000e+000 result=40 09:59:26 Config A/D Result=40 09:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:26 Get A/D filter: -9.255963e+061 result=40 09:59:26 Get A/D value=-858993460 result=40 09:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:26 Parameters OK 09:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:26 Set A/D data flow result=40 09:59:26 Set A/D channel type result=40 09:59:26 Set A/D encoding result=40 09:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:26 Set channel filter=0.000000e+000 result=40 09:59:26 Config A/D Result=40 09:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:26 Get A/D filter: -9.255963e+061 result=40 09:59:26 Get A/D value=-858993460 result=40 09:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:26 Aux= 09:59:26 Message to Camera, serial 273247 queued 10:00:03 Received message from Master: op=PointingHead serial=273260 10:00:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:00:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:00:03 Point started: ret=0 10:00:03 point_skyscan result=0 10:00:04 Check angles 10:00:04 SkyScan query 10:00:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:04 Message to Master queued w/err=0: serial=273260 error=0 10:00:09 Received message from Master: op=Filter serial=273261 10:00:09 Color wheel filter change from 0 to 0 10:00:09 FLIGetFilterPos err=0 currentPosition=0 10:00:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:09 Filter is already there-color wheel unchanged 10:00:10 Received message from Master: op=Shutter serial=273262 10:00:10 Shutter LASER close 10:00:10 Received message from Camera: op=State serial=273264 10:00:10 GetSingleValue result=40 Value=cccccccc 10:00:10 SkyScan query 10:00:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:10 Parameters OK 10:00:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:10 Set A/D data flow result=40 10:00:10 Set A/D channel type result=40 10:00:10 Set A/D encoding result=40 10:00:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:10 Set channel filter=0.000000e+000 result=40 10:00:10 Config A/D Result=40 10:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:10 Get A/D filter: -9.255963e+061 result=40 10:00:10 Get A/D value=-858993460 result=40 10:00:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:10 Parameters OK 10:00:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:10 Set A/D data flow result=40 10:00:10 Set A/D channel type result=40 10:00:10 Set A/D encoding result=40 10:00:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:10 Set channel filter=0.000000e+000 result=40 10:00:10 Config A/D Result=40 10:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:10 Get A/D filter: -9.255963e+061 result=40 10:00:10 Get A/D value=-858993460 result=40 10:00:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:10 Aux= 10:00:10 Message to Camera, serial 273264 queued 10:00:47 Received message from Master: op=PointingHead serial=273277 10:00:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:00:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:00:47 Point started: ret=0 10:00:47 point_skyscan result=0 10:00:48 Check angles 10:00:48 SkyScan query 10:00:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:00:49 Message to Master queued w/err=0: serial=273277 error=0 10:00:54 Received message from Master: op=Filter serial=273278 10:00:54 Color wheel filter change from 0 to 0 10:00:54 FLIGetFilterPos err=0 currentPosition=0 10:00:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:54 Filter is already there-color wheel unchanged 10:00:54 Received message from Master: op=Shutter serial=273279 10:00:54 Shutter LASER close 10:00:54 Received message from Camera: op=State serial=273281 10:00:54 GetSingleValue result=40 Value=cccccccc 10:00:54 SkyScan query 10:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:00:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:54 Parameters OK 10:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:54 Set A/D data flow result=40 10:00:54 Set A/D channel type result=40 10:00:54 Set A/D encoding result=40 10:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:54 Set channel filter=0.000000e+000 result=40 10:00:54 Config A/D Result=40 10:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:54 Get A/D filter: -9.255963e+061 result=40 10:00:54 Get A/D value=-858993460 result=40 10:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:54 Parameters OK 10:00:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:54 Set A/D data flow result=40 10:00:54 Set A/D channel type result=40 10:00:54 Set A/D encoding result=40 10:00:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:54 Set channel filter=0.000000e+000 result=40 10:00:54 Config A/D Result=40 10:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:54 Get A/D filter: -9.255963e+061 result=40 10:00:54 Get A/D value=-858993460 result=40 10:00:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:54 Aux= 10:00:54 Message to Camera, serial 273281 queued 10:01:31 Received message from Master: op=PointingHead serial=273294 10:01:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:01:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:01:32 Point started: ret=0 10:01:32 point_skyscan result=0 10:01:32 Check angles 10:01:32 SkyScan query 10:01:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 10:01:33 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 10:01:33 Check angles 10:01:33 SkyScan query 10:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 10:01:34 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 10:01:34 Check angles 10:01:34 SkyScan query 10:01:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 10:01:34 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 10:01:35 Check angles 10:01:35 SkyScan query 10:01:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 10:01:35 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 10:01:35 Check angles 10:01:35 SkyScan query 10:01:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 10:01:36 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 10:01:36 Check angles 10:01:36 SkyScan query 10:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.165<-20611 Statuses=0008 0009 10:01:37 Msec=3750 True Az=112.995 Ze=-129.165 Az status=0008 Ze status=0009 10:01:37 Check angles 10:01:37 SkyScan query 10:01:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.12<-22008 Statuses=0008 0009 10:01:37 Msec=4500 True Az=112.995 Ze=-150.12 Az status=0008 Ze status=0009 10:01:38 Check angles 10:01:38 SkyScan query 10:01:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.955<-23397 Statuses=0008 0009 10:01:38 Msec=5250 True Az=112.995 Ze=-170.955 Az status=0008 Ze status=0009 10:01:38 Check angles 10:01:38 SkyScan query 10:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:01:39 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:01:39 Message to Master queued w/err=0: serial=273294 error=0 10:01:44 Received message from Master: op=Filter serial=273295 10:01:44 Color wheel filter change from 0 to 0 10:01:44 FLIGetFilterPos err=0 currentPosition=0 10:01:44 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:44 Filter is already there-color wheel unchanged 10:01:44 Received message from Master: op=Shutter serial=273296 10:01:44 Shutter LASER open 10:01:44 Received message from Camera: op=State serial=273298 10:01:44 GetSingleValue result=40 Value=cccccccc 10:01:44 SkyScan query 10:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:01:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:45 Parameters OK 10:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:45 Set A/D data flow result=40 10:01:45 Set A/D channel type result=40 10:01:45 Set A/D encoding result=40 10:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:45 Set channel filter=0.000000e+000 result=40 10:01:45 Config A/D Result=40 10:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:45 Get A/D filter: -9.255963e+061 result=40 10:01:45 Get A/D value=-858993460 result=40 10:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:45 Parameters OK 10:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:45 Set A/D data flow result=40 10:01:45 Set A/D channel type result=40 10:01:45 Set A/D encoding result=40 10:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:45 Set channel filter=0.000000e+000 result=40 10:01:45 Config A/D Result=40 10:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:45 Get A/D filter: -9.255963e+061 result=40 10:01:45 Get A/D value=-858993460 result=40 10:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:45 Aux= 10:01:45 Message to Camera, serial 273298 queued 10:01:52 Received message from Master: op=Shutter serial=273307 10:01:52 Shutter LASER close 10:01:53 Received message from Master: op=PointingHead serial=273311 10:01:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:01:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:01:53 Point started: ret=0 10:01:53 point_skyscan result=0 10:01:54 Check angles 10:01:54 SkyScan query 10:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 10:01:55 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 10:01:55 Check angles 10:01:55 SkyScan query 10:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.605<-20107 Statuses=0008 0009 10:01:55 Msec=750 True Az=112.995 Ze=-121.605 Az status=0008 Ze status=0009 10:01:56 Check angles 10:01:56 SkyScan query 10:01:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.305<-18687 Statuses=0008 0009 10:01:56 Msec=1500 True Az=112.995 Ze=-100.305 Az status=0008 Ze status=0009 10:01:56 Check angles 10:01:56 SkyScan query 10:01:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 10:01:57 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 10:01:57 Check angles 10:01:57 SkyScan query 10:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.38<-15892 Statuses=0008 0009 10:01:58 Msec=3000 True Az=112.995 Ze=-58.38 Az status=0008 Ze status=0009 10:01:58 Check angles 10:01:58 SkyScan query 10:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.065<-14471 Statuses=0008 0009 10:01:58 Msec=3750 True Az=112.995 Ze=-37.065 Az status=0008 Ze status=0009 10:01:59 Check angles 10:01:59 SkyScan query 10:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.63<-13042 Statuses=0008 0009 10:01:59 Msec=4500 True Az=112.995 Ze=-15.63 Az status=0008 Ze status=0009 10:01:59 Check angles 10:01:59 SkyScan query 10:02:00 SkyScan query done: ret=0 az=112.995<-7533 ze=5.025<-11665 Statuses=0008 0009 10:02:00 Msec=5250 True Az=112.995 Ze=5.025 Az status=0008 Ze status=0009 10:02:00 Check angles 10:02:00 SkyScan query 10:02:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:02:01 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:02:01 Message to Master queued w/err=0: serial=273311 error=0 10:02:06 Received message from Master: op=Filter serial=273312 10:02:06 Color wheel filter change from 0 to 0 10:02:06 FLIGetFilterPos err=0 currentPosition=0 10:02:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:06 Filter is already there-color wheel unchanged 10:02:06 Received message from Master: op=Shutter serial=273313 10:02:06 Shutter LASER close 10:02:06 Received message from Camera: op=State serial=273315 10:02:06 GetSingleValue result=40 Value=cccccccc 10:02:06 SkyScan query 10:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:07 Parameters OK 10:02:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:07 Set A/D data flow result=40 10:02:07 Set A/D channel type result=40 10:02:07 Set A/D encoding result=40 10:02:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:07 Set channel filter=0.000000e+000 result=40 10:02:07 Config A/D Result=40 10:02:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:07 Get A/D filter: -9.255963e+061 result=40 10:02:07 Get A/D value=-858993460 result=40 10:02:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:07 Parameters OK 10:02:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:07 Set A/D data flow result=40 10:02:07 Set A/D channel type result=40 10:02:07 Set A/D encoding result=40 10:02:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:07 Set channel filter=0.000000e+000 result=40 10:02:07 Config A/D Result=40 10:02:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:07 Get A/D filter: -9.255963e+061 result=40 10:02:07 Get A/D value=-858993460 result=40 10:02:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:07 Aux= 10:02:07 Message to Camera, serial 273315 queued 10:02:43 Received message from Master: op=PointingHead serial=273328 10:02:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:02:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:02:44 Point started: ret=0 10:02:44 point_skyscan result=0 10:02:45 Check angles 10:02:45 SkyScan query 10:02:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:02:45 Message to Master queued w/err=0: serial=273328 error=0 10:02:50 Received message from Master: op=Filter serial=273329 10:02:50 Color wheel filter change from 0 to 0 10:02:50 FLIGetFilterPos err=0 currentPosition=0 10:02:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:50 Filter is already there-color wheel unchanged 10:02:50 Received message from Master: op=Shutter serial=273330 10:02:50 Shutter LASER close 10:02:50 Received message from Camera: op=State serial=273332 10:02:50 GetSingleValue result=40 Value=cccccccc 10:02:50 SkyScan query 10:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:02:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:51 Parameters OK 10:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:51 Set A/D data flow result=40 10:02:51 Set A/D channel type result=40 10:02:51 Set A/D encoding result=40 10:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:51 Set channel filter=0.000000e+000 result=40 10:02:51 Config A/D Result=40 10:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:51 Get A/D filter: -9.255963e+061 result=40 10:02:51 Get A/D value=-858993460 result=40 10:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:51 Parameters OK 10:02:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:51 Set A/D data flow result=40 10:02:51 Set A/D channel type result=40 10:02:51 Set A/D encoding result=40 10:02:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:51 Set channel filter=0.000000e+000 result=40 10:02:51 Config A/D Result=40 10:02:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:51 Get A/D filter: -9.255963e+061 result=40 10:02:51 Get A/D value=-858993460 result=40 10:02:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:51 Aux= 10:02:51 Message to Camera, serial 273332 queued 10:03:28 Received message from Master: op=PointingHead serial=273345 10:03:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:03:28 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:03:28 Point started: ret=0 10:03:28 point_skyscan result=0 10:03:29 Check angles 10:03:29 SkyScan query 10:03:29 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 10:03:29 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 10:03:30 Check angles 10:03:30 SkyScan query 10:03:30 SkyScan query done: ret=0 az=153.24<-10216 ze=-6.495<-12433 Statuses=0009 0008 10:03:30 Msec=750 True Az=153.24 Ze=-6.495 Az status=0009 Ze status=0008 10:03:30 Check angles 10:03:30 SkyScan query 10:03:31 SkyScan query done: ret=0 az=170.7<-11380 ze=-6.495<-12433 Statuses=0009 0008 10:03:31 Msec=1500 True Az=170.7 Ze=-6.495 Az status=0009 Ze status=0008 10:03:31 Check angles 10:03:31 SkyScan query 10:03:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:03:32 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:03:32 Message to Master queued w/err=0: serial=273345 error=0 10:03:35 Received message from Master: op=Identify serial=273346 10:03:37 Received message from Master: op=Filter serial=273349 10:03:37 Color wheel filter change from 0 to 0 10:03:37 FLIGetFilterPos err=0 currentPosition=0 10:03:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:37 Filter is already there-color wheel unchanged 10:03:37 Received message from Master: op=Shutter serial=273350 10:03:37 Shutter LASER close 10:03:37 Received message from Camera: op=State serial=273352 10:03:37 GetSingleValue result=40 Value=cccccccc 10:03:37 SkyScan query 10:03:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:03:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:37 Parameters OK 10:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:37 Set A/D data flow result=40 10:03:37 Set A/D channel type result=40 10:03:37 Set A/D encoding result=40 10:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:37 Set channel filter=0.000000e+000 result=40 10:03:37 Config A/D Result=40 10:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:37 Get A/D filter: -9.255963e+061 result=40 10:03:37 Get A/D value=-858993460 result=40 10:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:37 Parameters OK 10:03:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:37 Set A/D data flow result=40 10:03:37 Set A/D channel type result=40 10:03:37 Set A/D encoding result=40 10:03:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:37 Set channel filter=0.000000e+000 result=40 10:03:37 Config A/D Result=40 10:03:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:37 Get A/D filter: -9.255963e+061 result=40 10:03:37 Get A/D value=-858993460 result=40 10:03:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:37 Aux= 10:03:37 Message to Camera, serial 273352 queued [UTC 2019-3-14 10:03:48] 10:04:14 Received message from Master: op=PointingHead serial=273365 10:04:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:04:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:04:15 Point started: ret=0 10:04:15 point_skyscan result=0 10:04:15 Check angles 10:04:15 SkyScan query 10:04:16 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 10:04:16 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 10:04:16 Check angles 10:04:16 SkyScan query 10:04:17 SkyScan query done: ret=0 az=134.805<-8987 ze=6.495<-11567 Statuses=0009 0008 10:04:17 Msec=750 True Az=134.805 Ze=6.495 Az status=0009 Ze status=0008 10:04:17 Check angles 10:04:17 SkyScan query 10:04:17 SkyScan query done: ret=0 az=117.45<-7830 ze=6.495<-11567 Statuses=0009 0008 10:04:17 Msec=1500 True Az=117.45 Ze=6.495 Az status=0009 Ze status=0008 10:04:18 Check angles 10:04:18 SkyScan query 10:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:04:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:04:18 Message to Master queued w/err=0: serial=273365 error=0 10:04:23 Received message from Master: op=Filter serial=273366 10:04:23 Color wheel filter change from 0 to 0 10:04:23 FLIGetFilterPos err=0 currentPosition=0 10:04:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:23 Filter is already there-color wheel unchanged 10:04:23 Received message from Master: op=Shutter serial=273367 10:04:23 Shutter LASER close 10:04:23 Received message from Camera: op=State serial=273369 10:04:23 GetSingleValue result=40 Value=cccccccc 10:04:23 SkyScan query 10:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:24 Parameters OK 10:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:24 Set A/D data flow result=40 10:04:24 Set A/D channel type result=40 10:04:24 Set A/D encoding result=40 10:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:24 Set channel filter=0.000000e+000 result=40 10:04:24 Config A/D Result=40 10:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:24 Get A/D filter: -9.255963e+061 result=40 10:04:24 Get A/D value=-858993460 result=40 10:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:24 Parameters OK 10:04:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:24 Set A/D data flow result=40 10:04:24 Set A/D channel type result=40 10:04:24 Set A/D encoding result=40 10:04:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:24 Set channel filter=0.000000e+000 result=40 10:04:24 Config A/D Result=40 10:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:24 Get A/D filter: -9.255963e+061 result=40 10:04:24 Get A/D value=-858993460 result=40 10:04:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:24 Aux= 10:04:24 Message to Camera, serial 273369 queued 10:05:01 Received message from Master: op=PointingHead serial=273382 10:05:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:05:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:05:01 Point started: ret=0 10:05:01 point_skyscan result=0 10:05:02 Check angles 10:05:02 SkyScan query 10:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 10:05:03 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 10:05:03 Check angles 10:05:03 SkyScan query 10:05:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 10:05:03 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 10:05:03 Check angles 10:05:03 SkyScan query 10:05:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.625<-16375 Statuses=0008 0009 10:05:04 Msec=1500 True Az=112.995 Ze=-65.625 Az status=0008 Ze status=0009 10:05:04 Check angles 10:05:04 SkyScan query 10:05:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.58<-17772 Statuses=0008 0009 10:05:05 Msec=2250 True Az=112.995 Ze=-86.58 Az status=0008 Ze status=0009 10:05:05 Check angles 10:05:05 SkyScan query 10:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 10:05:06 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 10:05:06 Check angles 10:05:06 SkyScan query 10:05:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 10:05:06 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 10:05:06 Check angles 10:05:06 SkyScan query 10:05:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.91<-21994 Statuses=0008 0009 10:05:07 Msec=4500 True Az=112.995 Ze=-149.91 Az status=0008 Ze status=0009 10:05:07 Check angles 10:05:07 SkyScan query 10:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 10:05:08 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 10:05:08 Check angles 10:05:08 SkyScan query 10:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:05:09 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:05:09 Message to Master queued w/err=0: serial=273382 error=0 10:05:14 Received message from Master: op=Filter serial=273383 10:05:14 Color wheel filter change from 0 to 0 10:05:14 FLIGetFilterPos err=0 currentPosition=0 10:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:14 Filter is already there-color wheel unchanged 10:05:14 Received message from Master: op=Shutter serial=273384 10:05:14 Shutter LASER open 10:05:14 Received message from Camera: op=State serial=273386 10:05:14 GetSingleValue result=40 Value=cccccccc 10:05:14 SkyScan query 10:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:15 Parameters OK 10:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:15 Set A/D data flow result=40 10:05:15 Set A/D channel type result=40 10:05:15 Set A/D encoding result=40 10:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:15 Set channel filter=0.000000e+000 result=40 10:05:15 Config A/D Result=40 10:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:15 Get A/D filter: -9.255963e+061 result=40 10:05:15 Get A/D value=-858993460 result=40 10:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:15 Parameters OK 10:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:15 Set A/D data flow result=40 10:05:15 Set A/D channel type result=40 10:05:15 Set A/D encoding result=40 10:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:15 Set channel filter=0.000000e+000 result=40 10:05:15 Config A/D Result=40 10:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:15 Get A/D filter: -9.255963e+061 result=40 10:05:15 Get A/D value=-858993460 result=40 10:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:15 Aux= 10:05:15 Message to Camera, serial 273386 queued 10:05:23 Received message from Master: op=Shutter serial=273396 10:05:23 Shutter LASER close 10:05:23 Received message from Master: op=PointingHead serial=273400 10:05:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:05:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:05:24 Point started: ret=0 10:05:24 point_skyscan result=0 10:05:24 Check angles 10:05:24 SkyScan query 10:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 10:05:25 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 10:05:25 Check angles 10:05:25 SkyScan query 10:05:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 10:05:26 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 10:05:26 Check angles 10:05:26 SkyScan query 10:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.4<-18760 Statuses=0008 0009 10:05:27 Msec=1500 True Az=112.995 Ze=-101.4 Az status=0008 Ze status=0009 10:05:27 Check angles 10:05:27 SkyScan query 10:05:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 10:05:27 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 10:05:28 Check angles 10:05:28 SkyScan query 10:05:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.04<-15936 Statuses=0008 0009 10:05:28 Msec=3000 True Az=112.995 Ze=-59.04 Az status=0008 Ze status=0009 10:05:28 Check angles 10:05:28 SkyScan query 10:05:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 10:05:29 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 10:05:29 Check angles 10:05:29 SkyScan query 10:05:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 10:05:30 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 10:05:30 Check angles 10:05:30 SkyScan query 10:05:30 SkyScan query done: ret=0 az=113.01<-7534 ze=4.245<-11717 Statuses=0008 0009 10:05:30 Msec=5250 True Az=113.01 Ze=4.245 Az status=0008 Ze status=0009 10:05:31 Check angles 10:05:31 SkyScan query 10:05:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:05:31 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:05:31 Message to Master queued w/err=0: serial=273400 error=0 10:05:36 Received message from Master: op=Filter serial=273401 10:05:36 Color wheel filter change from 0 to 0 10:05:36 FLIGetFilterPos err=0 currentPosition=0 10:05:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:36 Filter is already there-color wheel unchanged 10:05:36 Received message from Master: op=Shutter serial=273402 10:05:36 Shutter LASER close 10:05:36 Received message from Camera: op=State serial=273404 10:05:36 GetSingleValue result=40 Value=cccccccc 10:05:36 SkyScan query 10:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:37 Parameters OK 10:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:37 Set A/D data flow result=40 10:05:37 Set A/D channel type result=40 10:05:37 Set A/D encoding result=40 10:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:37 Set channel filter=0.000000e+000 result=40 10:05:37 Config A/D Result=40 10:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:37 Get A/D filter: -9.255963e+061 result=40 10:05:37 Get A/D value=-858993460 result=40 10:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:37 Parameters OK 10:05:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:37 Set A/D data flow result=40 10:05:37 Set A/D channel type result=40 10:05:37 Set A/D encoding result=40 10:05:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:37 Set channel filter=0.000000e+000 result=40 10:05:37 Config A/D Result=40 10:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:37 Get A/D filter: -9.255963e+061 result=40 10:05:37 Get A/D value=-858993460 result=40 10:05:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:37 Aux= 10:05:37 Message to Camera, serial 273404 queued 10:06:14 Received message from Master: op=PointingHead serial=273417 10:06:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:14 Point started: ret=0 10:06:14 point_skyscan result=0 10:06:15 Check angles 10:06:15 SkyScan query 10:06:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:06:16 Message to Master queued w/err=0: serial=273417 error=0 10:06:21 Received message from Master: op=Filter serial=273418 10:06:21 Color wheel filter change from 0 to 0 10:06:21 FLIGetFilterPos err=0 currentPosition=0 10:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:21 Filter is already there-color wheel unchanged 10:06:21 Received message from Master: op=Shutter serial=273419 10:06:21 Shutter LASER close 10:06:21 Received message from Camera: op=State serial=273421 10:06:21 GetSingleValue result=40 Value=cccccccc 10:06:21 SkyScan query 10:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:06:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:21 Parameters OK 10:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:21 Set A/D data flow result=40 10:06:21 Set A/D channel type result=40 10:06:21 Set A/D encoding result=40 10:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:21 Set channel filter=0.000000e+000 result=40 10:06:21 Config A/D Result=40 10:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:21 Get A/D filter: -9.255963e+061 result=40 10:06:21 Get A/D value=-858993460 result=40 10:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:21 Parameters OK 10:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:21 Set A/D data flow result=40 10:06:21 Set A/D channel type result=40 10:06:21 Set A/D encoding result=40 10:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:21 Set channel filter=0.000000e+000 result=40 10:06:21 Config A/D Result=40 10:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:21 Get A/D filter: -9.255963e+061 result=40 10:06:21 Get A/D value=-858993460 result=40 10:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:21 Aux= 10:06:21 Message to Camera, serial 273421 queued 10:06:58 Received message from Master: op=PointingHead serial=273434 10:06:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:06:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:06:59 Point started: ret=0 10:06:59 point_skyscan result=0 10:06:59 Check angles 10:06:59 SkyScan query 10:07:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:07:00 Message to Master queued w/err=0: serial=273434 error=0 10:07:05 Received message from Master: op=Filter serial=273435 10:07:05 Color wheel filter change from 0 to 0 10:07:05 FLIGetFilterPos err=0 currentPosition=0 10:07:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:05 Filter is already there-color wheel unchanged 10:07:05 Received message from Master: op=Shutter serial=273436 10:07:05 Shutter LASER close 10:07:05 Received message from Camera: op=State serial=273438 10:07:05 GetSingleValue result=40 Value=cccccccc 10:07:05 SkyScan query 10:07:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:06 Parameters OK 10:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:06 Set A/D data flow result=40 10:07:06 Set A/D channel type result=40 10:07:06 Set A/D encoding result=40 10:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:06 Set channel filter=0.000000e+000 result=40 10:07:06 Config A/D Result=40 10:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:06 Get A/D filter: -9.255963e+061 result=40 10:07:06 Get A/D value=-858993460 result=40 10:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:06 Parameters OK 10:07:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:06 Set A/D data flow result=40 10:07:06 Set A/D channel type result=40 10:07:06 Set A/D encoding result=40 10:07:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:06 Set channel filter=0.000000e+000 result=40 10:07:06 Config A/D Result=40 10:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:06 Get A/D filter: -9.255963e+061 result=40 10:07:06 Get A/D value=-858993460 result=40 10:07:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:06 Aux= 10:07:06 Message to Camera, serial 273438 queued 10:07:43 Received message from Master: op=PointingHead serial=273451 10:07:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:07:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:07:43 Point started: ret=0 10:07:43 point_skyscan result=0 10:07:44 Check angles 10:07:44 SkyScan query 10:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:07:44 Message to Master queued w/err=0: serial=273451 error=0 10:07:49 Received message from Master: op=Filter serial=273452 10:07:49 Color wheel filter change from 0 to 0 10:07:49 FLIGetFilterPos err=0 currentPosition=0 10:07:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:49 Filter is already there-color wheel unchanged 10:07:49 Received message from Master: op=Shutter serial=273453 10:07:49 Shutter LASER close 10:07:49 Received message from Camera: op=State serial=273455 10:07:49 GetSingleValue result=40 Value=cccccccc 10:07:49 SkyScan query 10:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:07:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:50 Parameters OK 10:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:50 Set A/D data flow result=40 10:07:50 Set A/D channel type result=40 10:07:50 Set A/D encoding result=40 10:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:50 Set channel filter=0.000000e+000 result=40 10:07:50 Config A/D Result=40 10:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:50 Get A/D filter: -9.255963e+061 result=40 10:07:50 Get A/D value=-858993460 result=40 10:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:50 Parameters OK 10:07:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:50 Set A/D data flow result=40 10:07:50 Set A/D channel type result=40 10:07:50 Set A/D encoding result=40 10:07:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:50 Set channel filter=0.000000e+000 result=40 10:07:50 Config A/D Result=40 10:07:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:50 Get A/D filter: -9.255963e+061 result=40 10:07:50 Get A/D value=-858993460 result=40 10:07:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:50 Aux= 10:07:50 Message to Camera, serial 273455 queued 10:08:27 Received message from Master: op=PointingHead serial=273468 10:08:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:08:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:08:27 Point started: ret=0 10:08:27 point_skyscan result=0 10:08:28 Check angles 10:08:28 SkyScan query 10:08:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.685<-13579 Statuses=0008 0009 10:08:28 Msec=0 True Az=112.995 Ze=-23.685 Az status=0008 Ze status=0009 10:08:29 Check angles 10:08:29 SkyScan query 10:08:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 10:08:29 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 10:08:29 Check angles 10:08:29 SkyScan query 10:08:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.565<-16371 Statuses=0008 0009 10:08:30 Msec=1500 True Az=112.995 Ze=-65.565 Az status=0008 Ze status=0009 10:08:30 Check angles 10:08:30 SkyScan query 10:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.535<-17769 Statuses=0008 0009 10:08:31 Msec=2250 True Az=112.995 Ze=-86.535 Az status=0008 Ze status=0009 10:08:31 Check angles 10:08:31 SkyScan query 10:08:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 10:08:31 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 10:08:32 Check angles 10:08:32 SkyScan query 10:08:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 10:08:32 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 10:08:32 Check angles 10:08:32 SkyScan query 10:08:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 10:08:33 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 10:08:33 Check angles 10:08:33 SkyScan query 10:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.37<-23358 Statuses=0008 0009 10:08:34 Msec=5250 True Az=112.995 Ze=-170.37 Az status=0008 Ze status=0009 10:08:34 Check angles 10:08:34 SkyScan query 10:08:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:08:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:08:34 Message to Master queued w/err=0: serial=273468 error=0 10:08:39 Received message from Master: op=Filter serial=273469 10:08:39 Color wheel filter change from 0 to 0 10:08:39 FLIGetFilterPos err=0 currentPosition=0 10:08:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:39 Filter is already there-color wheel unchanged 10:08:40 Received message from Master: op=Shutter serial=273470 10:08:40 Shutter LASER open 10:08:40 Received message from Camera: op=State serial=273472 10:08:40 GetSingleValue result=40 Value=cccccccc 10:08:40 SkyScan query 10:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:08:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:40 Parameters OK 10:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:40 Set A/D data flow result=40 10:08:40 Set A/D channel type result=40 10:08:40 Set A/D encoding result=40 10:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:40 Set channel filter=0.000000e+000 result=40 10:08:40 Config A/D Result=40 10:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:40 Get A/D filter: -9.255963e+061 result=40 10:08:40 Get A/D value=-858993460 result=40 10:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:40 Parameters OK 10:08:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:40 Set A/D data flow result=40 10:08:40 Set A/D channel type result=40 10:08:40 Set A/D encoding result=40 10:08:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:40 Set channel filter=0.000000e+000 result=40 10:08:40 Config A/D Result=40 10:08:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:40 Get A/D filter: -9.255963e+061 result=40 10:08:40 Get A/D value=-858993460 result=40 10:08:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:40 Aux= 10:08:40 Message to Camera, serial 273472 queued 10:08:49 Received message from Master: op=Shutter serial=273482 10:08:49 Shutter LASER close 10:08:49 Received message from Master: op=PointingHead serial=273486 10:08:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:08:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:08:50 Point started: ret=0 10:08:50 point_skyscan result=0 10:08:51 Check angles 10:08:51 SkyScan query 10:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 10:08:51 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 10:08:51 Check angles 10:08:51 SkyScan query 10:08:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.905<-20127 Statuses=0008 0009 10:08:52 Msec=750 True Az=112.995 Ze=-121.905 Az status=0008 Ze status=0009 10:08:52 Check angles 10:08:52 SkyScan query 10:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.01<-18734 Statuses=0008 0009 10:08:53 Msec=1500 True Az=112.995 Ze=-101.01 Az status=0008 Ze status=0009 10:08:53 Check angles 10:08:53 SkyScan query 10:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 10:08:53 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 10:08:54 Check angles 10:08:54 SkyScan query 10:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 10:08:54 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 10:08:54 Check angles 10:08:54 SkyScan query 10:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 10:08:55 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 10:08:55 Check angles 10:08:55 SkyScan query 10:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.13<-13142 Statuses=0008 0009 10:08:56 Msec=4500 True Az=112.995 Ze=-17.13 Az status=0008 Ze status=0009 10:08:56 Check angles 10:08:56 SkyScan query 10:08:56 SkyScan query done: ret=0 az=112.995<-7533 ze=3.84<-11744 Statuses=0008 0009 10:08:56 Msec=5250 True Az=112.995 Ze=3.84 Az status=0008 Ze status=0009 10:08:57 Check angles 10:08:57 SkyScan query 10:08:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:08:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:08:57 Message to Master queued w/err=0: serial=273486 error=0 10:09:02 Received message from Master: op=Filter serial=273487 10:09:02 Color wheel filter change from 0 to 0 10:09:02 FLIGetFilterPos err=0 currentPosition=0 10:09:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:02 Filter is already there-color wheel unchanged 10:09:02 Received message from Master: op=Shutter serial=273488 10:09:02 Shutter LASER close 10:09:02 Received message from Camera: op=State serial=273490 10:09:02 GetSingleValue result=40 Value=cccccccc 10:09:02 SkyScan query 10:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:03 Parameters OK 10:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:03 Set A/D data flow result=40 10:09:03 Set A/D channel type result=40 10:09:03 Set A/D encoding result=40 10:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:03 Set channel filter=0.000000e+000 result=40 10:09:03 Config A/D Result=40 10:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:03 Get A/D filter: -9.255963e+061 result=40 10:09:03 Get A/D value=-858993460 result=40 10:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:03 Parameters OK 10:09:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:03 Set A/D data flow result=40 10:09:03 Set A/D channel type result=40 10:09:03 Set A/D encoding result=40 10:09:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:03 Set channel filter=0.000000e+000 result=40 10:09:03 Config A/D Result=40 10:09:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:03 Get A/D filter: -9.255963e+061 result=40 10:09:03 Get A/D value=-858993460 result=40 10:09:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:03 Aux= 10:09:03 Message to Camera, serial 273490 queued 10:09:40 Received message from Master: op=PointingHead serial=273503 10:09:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:09:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:09:40 Point started: ret=0 10:09:40 point_skyscan result=0 10:09:41 Check angles 10:09:41 SkyScan query 10:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:42 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:09:42 Message to Master queued w/err=0: serial=273503 error=0 10:09:47 Received message from Master: op=Filter serial=273504 10:09:47 Color wheel filter change from 0 to 0 10:09:47 FLIGetFilterPos err=0 currentPosition=0 10:09:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:47 Filter is already there-color wheel unchanged 10:09:47 Received message from Master: op=Shutter serial=273505 10:09:47 Shutter LASER close 10:09:47 Received message from Camera: op=State serial=273507 10:09:47 GetSingleValue result=40 Value=cccccccc 10:09:47 SkyScan query 10:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:09:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:47 Parameters OK 10:09:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:47 Set A/D data flow result=40 10:09:47 Set A/D channel type result=40 10:09:47 Set A/D encoding result=40 10:09:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:47 Set channel filter=0.000000e+000 result=40 10:09:47 Config A/D Result=40 10:09:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:47 Get A/D filter: -9.255963e+061 result=40 10:09:47 Get A/D value=-858993460 result=40 10:09:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:47 Parameters OK 10:09:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:47 Set A/D data flow result=40 10:09:47 Set A/D channel type result=40 10:09:47 Set A/D encoding result=40 10:09:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:47 Set channel filter=0.000000e+000 result=40 10:09:47 Config A/D Result=40 10:09:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:47 Get A/D filter: -9.255963e+061 result=40 10:09:47 Get A/D value=-858993460 result=40 10:09:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:47 Aux= 10:09:47 Message to Camera, serial 273507 queued 10:10:24 Received message from Master: op=PointingHead serial=273520 10:10:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:10:24 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:10:25 Point started: ret=0 10:10:25 point_skyscan result=0 10:10:25 Check angles 10:10:25 SkyScan query 10:10:26 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 10:10:26 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 10:10:26 Check angles 10:10:26 SkyScan query 10:10:27 SkyScan query done: ret=0 az=153.27<-10218 ze=-6.495<-12433 Statuses=0009 0008 10:10:27 Msec=750 True Az=153.27 Ze=-6.495 Az status=0009 Ze status=0008 10:10:27 Check angles 10:10:27 SkyScan query 10:10:27 SkyScan query done: ret=0 az=170.67<-11378 ze=-6.495<-12433 Statuses=0009 0008 10:10:27 Msec=1500 True Az=170.67 Ze=-6.495 Az status=0009 Ze status=0008 10:10:28 Check angles 10:10:28 SkyScan query 10:10:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:10:28 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:10:28 Message to Master queued w/err=0: serial=273520 error=0 10:10:33 Received message from Master: op=Filter serial=273521 10:10:33 Color wheel filter change from 0 to 0 10:10:33 FLIGetFilterPos err=0 currentPosition=0 10:10:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:33 Filter is already there-color wheel unchanged 10:10:33 Received message from Master: op=Shutter serial=273522 10:10:33 Shutter LASER close 10:10:33 Received message from Camera: op=State serial=273524 10:10:33 GetSingleValue result=40 Value=cccccccc 10:10:33 SkyScan query 10:10:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:10:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:34 Parameters OK 10:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:34 Set A/D data flow result=40 10:10:34 Set A/D channel type result=40 10:10:34 Set A/D encoding result=40 10:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:34 Set channel filter=0.000000e+000 result=40 10:10:34 Config A/D Result=40 10:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:34 Get A/D filter: -9.255963e+061 result=40 10:10:34 Get A/D value=-858993460 result=40 10:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:34 Parameters OK 10:10:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:34 Set A/D data flow result=40 10:10:34 Set A/D channel type result=40 10:10:34 Set A/D encoding result=40 10:10:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:34 Set channel filter=0.000000e+000 result=40 10:10:34 Config A/D Result=40 10:10:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:34 Get A/D filter: -9.255963e+061 result=40 10:10:34 Get A/D value=-858993460 result=40 10:10:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:34 Aux= 10:10:34 Message to Camera, serial 273524 queued 10:11:11 Received message from Master: op=PointingHead serial=273537 10:11:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:11:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:11:11 Point started: ret=0 10:11:11 point_skyscan result=0 10:11:12 Check angles 10:11:12 SkyScan query 10:11:12 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 10:11:12 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 10:11:13 Check angles 10:11:13 SkyScan query 10:11:13 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 10:11:13 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 10:11:13 Check angles 10:11:13 SkyScan query 10:11:14 SkyScan query done: ret=0 az=117.72<-7848 ze=6.495<-11567 Statuses=0009 0008 10:11:14 Msec=1500 True Az=117.72 Ze=6.495 Az status=0009 Ze status=0008 10:11:14 Check angles 10:11:14 SkyScan query 10:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:15 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:11:15 Message to Master queued w/err=0: serial=273537 error=0 10:11:20 Received message from Master: op=Filter serial=273538 10:11:20 Color wheel filter change from 0 to 0 10:11:20 FLIGetFilterPos err=0 currentPosition=0 10:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:20 Filter is already there-color wheel unchanged 10:11:20 Received message from Master: op=Shutter serial=273539 10:11:20 Shutter LASER close 10:11:20 Received message from Camera: op=State serial=273541 10:11:20 GetSingleValue result=40 Value=cccccccc 10:11:20 SkyScan query 10:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:11:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:21 Parameters OK 10:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:21 Set A/D data flow result=40 10:11:21 Set A/D channel type result=40 10:11:21 Set A/D encoding result=40 10:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:21 Set channel filter=0.000000e+000 result=40 10:11:21 Config A/D Result=40 10:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:21 Get A/D filter: -9.255963e+061 result=40 10:11:21 Get A/D value=-858993460 result=40 10:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:21 Parameters OK 10:11:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:21 Set A/D data flow result=40 10:11:21 Set A/D channel type result=40 10:11:21 Set A/D encoding result=40 10:11:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:21 Set channel filter=0.000000e+000 result=40 10:11:21 Config A/D Result=40 10:11:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:21 Get A/D filter: -9.255963e+061 result=40 10:11:21 Get A/D value=-858993460 result=40 10:11:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:21 Aux= 10:11:21 Message to Camera, serial 273541 queued 10:11:57 Received message from Master: op=PointingHead serial=273554 10:11:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:11:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:11:58 Point started: ret=0 10:11:58 point_skyscan result=0 10:11:58 Check angles 10:11:58 SkyScan query 10:11:59 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.28<-13552 Statuses=0008 0009 10:11:59 Msec=0 True Az=112.98 Ze=-23.28 Az status=0008 Ze status=0009 10:11:59 Check angles 10:11:59 SkyScan query 10:12:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.265<-14951 Statuses=0008 0009 10:12:00 Msec=750 True Az=112.995 Ze=-44.265 Az status=0008 Ze status=0009 10:12:00 Check angles 10:12:00 SkyScan query 10:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.19<-16346 Statuses=0008 0009 10:12:01 Msec=1500 True Az=112.995 Ze=-65.19 Az status=0008 Ze status=0009 10:12:01 Check angles 10:12:01 SkyScan query 10:12:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.145<-17743 Statuses=0008 0009 10:12:01 Msec=2250 True Az=112.995 Ze=-86.145 Az status=0008 Ze status=0009 10:12:01 Check angles 10:12:01 SkyScan query 10:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.07<-19138 Statuses=0008 0009 10:12:02 Msec=3000 True Az=112.995 Ze=-107.07 Az status=0008 Ze status=0009 10:12:02 Check angles 10:12:02 SkyScan query 10:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.04<-20536 Statuses=0008 0009 10:12:03 Msec=3750 True Az=112.995 Ze=-128.04 Az status=0008 Ze status=0009 10:12:03 Check angles 10:12:03 SkyScan query 10:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.025<-21935 Statuses=0008 0009 10:12:04 Msec=4500 True Az=112.995 Ze=-149.025 Az status=0008 Ze status=0009 10:12:04 Check angles 10:12:04 SkyScan query 10:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 10:12:04 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 10:12:04 Check angles 10:12:04 SkyScan query 10:12:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:12:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:12:05 Message to Master queued w/err=0: serial=273554 error=0 10:12:10 Received message from Master: op=Filter serial=273555 10:12:10 Color wheel filter change from 0 to 0 10:12:10 FLIGetFilterPos err=0 currentPosition=0 10:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:10 Filter is already there-color wheel unchanged 10:12:10 Received message from Master: op=Shutter serial=273556 10:12:10 Shutter LASER open 10:12:10 Received message from Camera: op=State serial=273558 10:12:10 GetSingleValue result=40 Value=cccccccc 10:12:10 SkyScan query 10:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:12:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:11 Parameters OK 10:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:11 Set A/D data flow result=40 10:12:11 Set A/D channel type result=40 10:12:11 Set A/D encoding result=40 10:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:11 Set channel filter=0.000000e+000 result=40 10:12:11 Config A/D Result=40 10:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:11 Get A/D filter: -9.255963e+061 result=40 10:12:11 Get A/D value=-858993460 result=40 10:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:11 Parameters OK 10:12:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:11 Set A/D data flow result=40 10:12:11 Set A/D channel type result=40 10:12:11 Set A/D encoding result=40 10:12:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:11 Set channel filter=0.000000e+000 result=40 10:12:11 Config A/D Result=40 10:12:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:11 Get A/D filter: -9.255963e+061 result=40 10:12:11 Get A/D value=-858993460 result=40 10:12:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:11 Aux= 10:12:11 Message to Camera, serial 273558 queued 10:12:19 Received message from Master: op=Shutter serial=273568 10:12:19 Shutter LASER close 10:12:20 Received message from Master: op=PointingHead serial=273572 10:12:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:12:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:12:20 Point started: ret=0 10:12:20 point_skyscan result=0 10:12:21 Check angles 10:12:21 SkyScan query 10:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 10:12:22 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 10:12:22 Check angles 10:12:22 SkyScan query 10:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 10:12:22 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 10:12:22 Check angles 10:12:22 SkyScan query 10:12:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 10:12:23 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 10:12:23 Check angles 10:12:23 SkyScan query 10:12:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 10:12:24 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 10:12:24 Check angles 10:12:24 SkyScan query 10:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.41<-15894 Statuses=0008 0009 10:12:25 Msec=3000 True Az=112.995 Ze=-58.41 Az status=0008 Ze status=0009 10:12:25 Check angles 10:12:25 SkyScan query 10:12:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.5<-14500 Statuses=0008 0009 10:12:25 Msec=3750 True Az=112.995 Ze=-37.5 Az status=0008 Ze status=0009 10:12:25 Check angles 10:12:25 SkyScan query 10:12:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 10:12:26 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 10:12:26 Check angles 10:12:26 SkyScan query 10:12:27 SkyScan query done: ret=0 az=113.01<-7534 ze=4.335<-11711 Statuses=0008 0009 10:12:27 Msec=5250 True Az=113.01 Ze=4.335 Az status=0008 Ze status=0009 10:12:27 Check angles 10:12:27 SkyScan query 10:12:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:12:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:12:28 Message to Master queued w/err=0: serial=273572 error=0 10:12:33 Received message from Master: op=Filter serial=273573 10:12:33 Color wheel filter change from 0 to 0 10:12:33 FLIGetFilterPos err=0 currentPosition=0 10:12:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:33 Filter is already there-color wheel unchanged 10:12:33 Received message from Master: op=Shutter serial=273574 10:12:33 Shutter LASER close 10:12:33 Received message from Camera: op=State serial=273576 10:12:33 GetSingleValue result=40 Value=cccccccc 10:12:33 SkyScan query 10:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:12:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:33 Parameters OK 10:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:33 Set A/D data flow result=40 10:12:33 Set A/D channel type result=40 10:12:33 Set A/D encoding result=40 10:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:33 Set channel filter=0.000000e+000 result=40 10:12:33 Config A/D Result=40 10:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:33 Get A/D filter: -9.255963e+061 result=40 10:12:33 Get A/D value=-858993460 result=40 10:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:33 Parameters OK 10:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:33 Set A/D data flow result=40 10:12:33 Set A/D channel type result=40 10:12:33 Set A/D encoding result=40 10:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:33 Set channel filter=0.000000e+000 result=40 10:12:33 Config A/D Result=40 10:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:33 Get A/D filter: -9.255963e+061 result=40 10:12:33 Get A/D value=-858993460 result=40 10:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:33 Aux= 10:12:33 Message to Camera, serial 273576 queued 10:13:10 Received message from Master: op=PointingHead serial=273589 10:13:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:11 Point started: ret=0 10:13:11 point_skyscan result=0 10:13:11 Check angles 10:13:11 SkyScan query 10:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:13:12 Message to Master queued w/err=0: serial=273589 error=0 10:13:17 Received message from Master: op=Filter serial=273590 10:13:17 Color wheel filter change from 0 to 0 10:13:17 FLIGetFilterPos err=0 currentPosition=0 10:13:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:17 Filter is already there-color wheel unchanged 10:13:17 Received message from Master: op=Shutter serial=273591 10:13:17 Shutter LASER close 10:13:17 Received message from Camera: op=State serial=273593 10:13:17 GetSingleValue result=40 Value=cccccccc 10:13:17 SkyScan query 10:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:18 Parameters OK 10:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:18 Set A/D data flow result=40 10:13:18 Set A/D channel type result=40 10:13:18 Set A/D encoding result=40 10:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:18 Set channel filter=0.000000e+000 result=40 10:13:18 Config A/D Result=40 10:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:18 Get A/D filter: -9.255963e+061 result=40 10:13:18 Get A/D value=-858993460 result=40 10:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:18 Parameters OK 10:13:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:18 Set A/D data flow result=40 10:13:18 Set A/D channel type result=40 10:13:18 Set A/D encoding result=40 10:13:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:18 Set channel filter=0.000000e+000 result=40 10:13:18 Config A/D Result=40 10:13:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:18 Get A/D filter: -9.255963e+061 result=40 10:13:18 Get A/D value=-858993460 result=40 10:13:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:18 Aux= 10:13:18 Message to Camera, serial 273593 queued 10:13:55 Received message from Master: op=PointingHead serial=273606 10:13:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:13:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:13:55 Point started: ret=0 10:13:55 point_skyscan result=0 10:13:56 Check angles 10:13:56 SkyScan query 10:13:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:13:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:13:56 Message to Master queued w/err=0: serial=273606 error=0 10:14:01 Received message from Master: op=Filter serial=273607 10:14:01 Color wheel filter change from 0 to 0 10:14:01 FLIGetFilterPos err=0 currentPosition=0 10:14:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:01 Filter is already there-color wheel unchanged 10:14:01 Received message from Master: op=Shutter serial=273608 10:14:01 Shutter LASER close 10:14:02 Received message from Camera: op=State serial=273610 10:14:02 GetSingleValue result=40 Value=cccccccc 10:14:02 SkyScan query 10:14:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:02 Parameters OK 10:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:02 Set A/D data flow result=40 10:14:02 Set A/D channel type result=40 10:14:02 Set A/D encoding result=40 10:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:02 Set channel filter=0.000000e+000 result=40 10:14:02 Config A/D Result=40 10:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:02 Get A/D filter: -9.255963e+061 result=40 10:14:02 Get A/D value=-858993460 result=40 10:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:02 Parameters OK 10:14:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:02 Set A/D data flow result=40 10:14:02 Set A/D channel type result=40 10:14:02 Set A/D encoding result=40 10:14:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:02 Set channel filter=0.000000e+000 result=40 10:14:02 Config A/D Result=40 10:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:02 Get A/D filter: -9.255963e+061 result=40 10:14:02 Get A/D value=-858993460 result=40 10:14:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:02 Aux= 10:14:02 Message to Camera, serial 273610 queued [UTC 2019-3-14 10:14:39] 10:14:39 Received message from Master: op=PointingHead serial=273623 10:14:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:14:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:14:39 Point started: ret=0 10:14:39 point_skyscan result=0 10:14:40 Check angles 10:14:40 SkyScan query 10:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:14:41 Message to Master queued w/err=0: serial=273623 error=0 10:14:46 Received message from Master: op=Filter serial=273624 10:14:46 Color wheel filter change from 0 to 0 10:14:46 FLIGetFilterPos err=0 currentPosition=0 10:14:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:46 Filter is already there-color wheel unchanged 10:14:46 Received message from Master: op=Shutter serial=273625 10:14:46 Shutter LASER close 10:14:46 Received message from Camera: op=State serial=273627 10:14:46 GetSingleValue result=40 Value=cccccccc 10:14:46 SkyScan query 10:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:14:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:46 Parameters OK 10:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:46 Set A/D data flow result=40 10:14:46 Set A/D channel type result=40 10:14:46 Set A/D encoding result=40 10:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:46 Set channel filter=0.000000e+000 result=40 10:14:46 Config A/D Result=40 10:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:46 Get A/D filter: -9.255963e+061 result=40 10:14:46 Get A/D value=-858993460 result=40 10:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:46 Parameters OK 10:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:46 Set A/D data flow result=40 10:14:46 Set A/D channel type result=40 10:14:46 Set A/D encoding result=40 10:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:46 Set channel filter=0.000000e+000 result=40 10:14:46 Config A/D Result=40 10:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:46 Get A/D filter: -9.255963e+061 result=40 10:14:46 Get A/D value=-858993460 result=40 10:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:46 Aux= 10:14:46 Message to Camera, serial 273627 queued 10:15:23 Received message from Master: op=PointingHead serial=273640 10:15:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:15:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:15:24 Point started: ret=0 10:15:24 point_skyscan result=0 10:15:24 Check angles 10:15:24 SkyScan query 10:15:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.46<-13564 Statuses=0008 0009 10:15:25 Msec=0 True Az=112.995 Ze=-23.46 Az status=0008 Ze status=0009 10:15:25 Check angles 10:15:25 SkyScan query 10:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 10:15:26 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 10:15:26 Check angles 10:15:26 SkyScan query 10:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 10:15:26 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 10:15:27 Check angles 10:15:27 SkyScan query 10:15:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.76<-17784 Statuses=0008 0009 10:15:27 Msec=2250 True Az=112.995 Ze=-86.76 Az status=0008 Ze status=0009 10:15:27 Check angles 10:15:27 SkyScan query 10:15:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.18<-19212 Statuses=0008 0009 10:15:28 Msec=3000 True Az=112.995 Ze=-108.18 Az status=0008 Ze status=0009 10:15:28 Check angles 10:15:28 SkyScan query 10:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.105<-20607 Statuses=0008 0009 10:15:29 Msec=3750 True Az=112.995 Ze=-129.105 Az status=0008 Ze status=0009 10:15:29 Check angles 10:15:29 SkyScan query 10:15:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.075<-22005 Statuses=0008 0009 10:15:29 Msec=4500 True Az=112.995 Ze=-150.075 Az status=0008 Ze status=0009 10:15:30 Check angles 10:15:30 SkyScan query 10:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 10:15:30 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 10:15:30 Check angles 10:15:30 SkyScan query 10:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:15:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:15:31 Message to Master queued w/err=0: serial=273640 error=0 10:15:36 Received message from Master: op=Filter serial=273641 10:15:36 Color wheel filter change from 0 to 0 10:15:36 FLIGetFilterPos err=0 currentPosition=0 10:15:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:36 Filter is already there-color wheel unchanged 10:15:36 Received message from Master: op=Shutter serial=273642 10:15:36 Shutter LASER open 10:15:36 Received message from Camera: op=State serial=273644 10:15:36 GetSingleValue result=40 Value=cccccccc 10:15:36 SkyScan query 10:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:15:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:37 Parameters OK 10:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:37 Set A/D data flow result=40 10:15:37 Set A/D channel type result=40 10:15:37 Set A/D encoding result=40 10:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:37 Set channel filter=0.000000e+000 result=40 10:15:37 Config A/D Result=40 10:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:37 Get A/D filter: -9.255963e+061 result=40 10:15:37 Get A/D value=-858993460 result=40 10:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:37 Parameters OK 10:15:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:37 Set A/D data flow result=40 10:15:37 Set A/D channel type result=40 10:15:37 Set A/D encoding result=40 10:15:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:37 Set channel filter=0.000000e+000 result=40 10:15:37 Config A/D Result=40 10:15:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:37 Get A/D filter: -9.255963e+061 result=40 10:15:37 Get A/D value=-858993460 result=40 10:15:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:37 Aux= 10:15:37 Message to Camera, serial 273644 queued 10:15:45 Received message from Master: op=Shutter serial=273654 10:15:45 Shutter LASER close 10:15:46 Received message from Master: op=PointingHead serial=273658 10:15:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:15:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:15:46 Point started: ret=0 10:15:46 point_skyscan result=0 10:15:47 Check angles 10:15:47 SkyScan query 10:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.1<-21540 Statuses=0008 0009 10:15:48 Msec=0 True Az=112.995 Ze=-143.1 Az status=0008 Ze status=0009 10:15:48 Check angles 10:15:48 SkyScan query 10:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.95<-20130 Statuses=0008 0009 10:15:48 Msec=750 True Az=112.995 Ze=-121.95 Az status=0008 Ze status=0009 10:15:49 Check angles 10:15:49 SkyScan query 10:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 10:15:49 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 10:15:49 Check angles 10:15:49 SkyScan query 10:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 10:15:50 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 10:15:50 Check angles 10:15:50 SkyScan query 10:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.295<-15953 Statuses=0008 0009 10:15:51 Msec=3000 True Az=112.995 Ze=-59.295 Az status=0008 Ze status=0009 10:15:51 Check angles 10:15:51 SkyScan query 10:15:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 10:15:51 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 10:15:52 Check angles 10:15:52 SkyScan query 10:15:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.34<-13156 Statuses=0008 0009 10:15:52 Msec=4500 True Az=112.995 Ze=-17.34 Az status=0008 Ze status=0009 10:15:52 Check angles 10:15:52 SkyScan query 10:15:53 SkyScan query done: ret=0 az=112.995<-7533 ze=3.63<-11758 Statuses=0008 0009 10:15:53 Msec=5250 True Az=112.995 Ze=3.63 Az status=0008 Ze status=0009 10:15:53 Check angles 10:15:53 SkyScan query 10:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:15:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:15:54 Message to Master queued w/err=0: serial=273658 error=0 10:15:59 Received message from Master: op=Filter serial=273659 10:15:59 Color wheel filter change from 0 to 0 10:15:59 FLIGetFilterPos err=0 currentPosition=0 10:15:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:59 Filter is already there-color wheel unchanged 10:15:59 Received message from Master: op=Shutter serial=273660 10:15:59 Shutter LASER close 10:15:59 Received message from Camera: op=State serial=273662 10:15:59 GetSingleValue result=40 Value=cccccccc 10:15:59 SkyScan query 10:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:00 Parameters OK 10:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:00 Set A/D data flow result=40 10:16:00 Set A/D channel type result=40 10:16:00 Set A/D encoding result=40 10:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:00 Set channel filter=0.000000e+000 result=40 10:16:00 Config A/D Result=40 10:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:00 Get A/D filter: -9.255963e+061 result=40 10:16:00 Get A/D value=-858993460 result=40 10:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:00 Parameters OK 10:16:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:00 Set A/D data flow result=40 10:16:00 Set A/D channel type result=40 10:16:00 Set A/D encoding result=40 10:16:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:00 Set channel filter=0.000000e+000 result=40 10:16:00 Config A/D Result=40 10:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:00 Get A/D filter: -9.255963e+061 result=40 10:16:00 Get A/D value=-858993460 result=40 10:16:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:00 Aux= 10:16:00 Message to Camera, serial 273662 queued 10:16:36 Received message from Master: op=PointingHead serial=273675 10:16:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:16:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:16:37 Point started: ret=0 10:16:37 point_skyscan result=0 10:16:38 Check angles 10:16:38 SkyScan query 10:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:16:38 Message to Master queued w/err=0: serial=273675 error=0 10:16:43 Received message from Master: op=Filter serial=273676 10:16:43 Color wheel filter change from 0 to 0 10:16:43 FLIGetFilterPos err=0 currentPosition=0 10:16:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:43 Filter is already there-color wheel unchanged 10:16:43 Received message from Master: op=Shutter serial=273677 10:16:43 Shutter LASER close 10:16:43 Received message from Camera: op=State serial=273679 10:16:43 GetSingleValue result=40 Value=cccccccc 10:16:43 SkyScan query 10:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:16:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:44 Parameters OK 10:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:44 Set A/D data flow result=40 10:16:44 Set A/D channel type result=40 10:16:44 Set A/D encoding result=40 10:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:44 Set channel filter=0.000000e+000 result=40 10:16:44 Config A/D Result=40 10:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:44 Get A/D filter: -9.255963e+061 result=40 10:16:44 Get A/D value=-858993460 result=40 10:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:44 Parameters OK 10:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:44 Set A/D data flow result=40 10:16:44 Set A/D channel type result=40 10:16:44 Set A/D encoding result=40 10:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:44 Set channel filter=0.000000e+000 result=40 10:16:44 Config A/D Result=40 10:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:44 Get A/D filter: -9.255963e+061 result=40 10:16:44 Get A/D value=-858993460 result=40 10:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:44 Aux= 10:16:44 Message to Camera, serial 273679 queued 10:17:21 Received message from Master: op=PointingHead serial=273692 10:17:21 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:17:21 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:17:21 Point started: ret=0 10:17:21 point_skyscan result=0 10:17:22 Check angles 10:17:22 SkyScan query 10:17:22 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 10:17:22 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 10:17:23 Check angles 10:17:23 SkyScan query 10:17:23 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 10:17:23 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 10:17:23 Check angles 10:17:23 SkyScan query 10:17:24 SkyScan query done: ret=0 az=171.315<-11421 ze=-6.495<-12433 Statuses=0009 0008 10:17:24 Msec=1500 True Az=171.315 Ze=-6.495 Az status=0009 Ze status=0008 10:17:24 Check angles 10:17:24 SkyScan query 10:17:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:17:25 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:17:25 Message to Master queued w/err=0: serial=273692 error=0 10:17:30 Received message from Master: op=Filter serial=273693 10:17:30 Color wheel filter change from 0 to 0 10:17:30 FLIGetFilterPos err=0 currentPosition=0 10:17:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:30 Filter is already there-color wheel unchanged 10:17:30 Received message from Master: op=Shutter serial=273694 10:17:30 Shutter LASER close 10:17:30 Received message from Camera: op=State serial=273696 10:17:30 GetSingleValue result=40 Value=cccccccc 10:17:30 SkyScan query 10:17:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:17:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:30 Parameters OK 10:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:30 Set A/D data flow result=40 10:17:30 Set A/D channel type result=40 10:17:30 Set A/D encoding result=40 10:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:30 Set channel filter=0.000000e+000 result=40 10:17:30 Config A/D Result=40 10:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:30 Get A/D filter: -9.255963e+061 result=40 10:17:30 Get A/D value=-858993460 result=40 10:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:30 Parameters OK 10:17:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:30 Set A/D data flow result=40 10:17:30 Set A/D channel type result=40 10:17:30 Set A/D encoding result=40 10:17:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:30 Set channel filter=0.000000e+000 result=40 10:17:30 Config A/D Result=40 10:17:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:30 Get A/D filter: -9.255963e+061 result=40 10:17:30 Get A/D value=-858993460 result=40 10:17:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:30 Aux= 10:17:30 Message to Camera, serial 273696 queued 10:18:07 Received message from Master: op=PointingHead serial=273709 10:18:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:18:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:18:08 Point started: ret=0 10:18:08 point_skyscan result=0 10:18:08 Check angles 10:18:08 SkyScan query 10:18:09 SkyScan query done: ret=0 az=152.55<-10170 ze=6.51<-11566 Statuses=0009 0008 10:18:09 Msec=0 True Az=152.55 Ze=6.51 Az status=0009 Ze status=0008 10:18:09 Check angles 10:18:09 SkyScan query 10:18:10 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 10:18:10 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 10:18:10 Check angles 10:18:10 SkyScan query 10:18:10 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 10:18:10 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 10:18:11 Check angles 10:18:11 SkyScan query 10:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:11 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:18:11 Message to Master queued w/err=0: serial=273709 error=0 10:18:16 Received message from Master: op=Filter serial=273710 10:18:16 Color wheel filter change from 0 to 0 10:18:16 FLIGetFilterPos err=0 currentPosition=0 10:18:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:16 Filter is already there-color wheel unchanged 10:18:16 Received message from Master: op=Shutter serial=273711 10:18:16 Shutter LASER close 10:18:16 Received message from Camera: op=State serial=273713 10:18:16 GetSingleValue result=40 Value=cccccccc 10:18:16 SkyScan query 10:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:18:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:17 Parameters OK 10:18:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:17 Set A/D data flow result=40 10:18:17 Set A/D channel type result=40 10:18:17 Set A/D encoding result=40 10:18:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:17 Set channel filter=0.000000e+000 result=40 10:18:17 Config A/D Result=40 10:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:17 Get A/D filter: -9.255963e+061 result=40 10:18:17 Get A/D value=-858993460 result=40 10:18:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:17 Parameters OK 10:18:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:17 Set A/D data flow result=40 10:18:17 Set A/D channel type result=40 10:18:17 Set A/D encoding result=40 10:18:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:17 Set channel filter=0.000000e+000 result=40 10:18:17 Config A/D Result=40 10:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:17 Get A/D filter: -9.255963e+061 result=40 10:18:17 Get A/D value=-858993460 result=40 10:18:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:17 Aux= 10:18:17 Message to Camera, serial 273713 queued 10:18:54 Received message from Master: op=PointingHead serial=273726 10:18:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:18:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:18:54 Point started: ret=0 10:18:54 point_skyscan result=0 10:18:55 Check angles 10:18:55 SkyScan query 10:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 10:18:56 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 10:18:56 Check angles 10:18:56 SkyScan query 10:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 10:18:56 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 10:18:56 Check angles 10:18:56 SkyScan query 10:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 10:18:57 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 10:18:57 Check angles 10:18:57 SkyScan query 10:18:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 10:18:58 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 10:18:58 Check angles 10:18:58 SkyScan query 10:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 10:18:59 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 10:18:59 Check angles 10:18:59 SkyScan query 10:18:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 10:18:59 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 10:18:59 Check angles 10:18:59 SkyScan query 10:19:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.015<-22001 Statuses=0008 0009 10:19:00 Msec=4500 True Az=112.995 Ze=-150.015 Az status=0008 Ze status=0009 10:19:00 Check angles 10:19:00 SkyScan query 10:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 10:19:01 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 10:19:01 Check angles 10:19:01 SkyScan query 10:19:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:19:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:19:02 Message to Master queued w/err=0: serial=273726 error=0 10:19:07 Received message from Master: op=Filter serial=273727 10:19:07 Color wheel filter change from 0 to 0 10:19:07 FLIGetFilterPos err=0 currentPosition=0 10:19:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:07 Filter is already there-color wheel unchanged 10:19:07 Received message from Master: op=Shutter serial=273728 10:19:07 Shutter LASER open 10:19:07 Received message from Camera: op=State serial=273730 10:19:07 GetSingleValue result=40 Value=cccccccc 10:19:07 SkyScan query 10:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:19:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:07 Parameters OK 10:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:07 Set A/D data flow result=40 10:19:07 Set A/D channel type result=40 10:19:07 Set A/D encoding result=40 10:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:07 Set channel filter=0.000000e+000 result=40 10:19:07 Config A/D Result=40 10:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:07 Get A/D filter: -9.255963e+061 result=40 10:19:07 Get A/D value=-858993460 result=40 10:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:07 Parameters OK 10:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:07 Set A/D data flow result=40 10:19:07 Set A/D channel type result=40 10:19:07 Set A/D encoding result=40 10:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:07 Set channel filter=0.000000e+000 result=40 10:19:07 Config A/D Result=40 10:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:07 Get A/D filter: -9.255963e+061 result=40 10:19:07 Get A/D value=-858993460 result=40 10:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:07 Aux= 10:19:07 Message to Camera, serial 273730 queued 10:19:16 Received message from Master: op=Shutter serial=273740 10:19:16 Shutter LASER close 10:19:16 Received message from Master: op=PointingHead serial=273744 10:19:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:19:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:19:17 Point started: ret=0 10:19:17 point_skyscan result=0 10:19:17 Check angles 10:19:17 SkyScan query 10:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 10:19:18 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 10:19:18 Check angles 10:19:18 SkyScan query 10:19:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 10:19:19 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 10:19:19 Check angles 10:19:19 SkyScan query 10:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 10:19:20 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 10:19:20 Check angles 10:19:20 SkyScan query 10:19:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.34<-17356 Statuses=0008 0009 10:19:20 Msec=2250 True Az=112.995 Ze=-80.34 Az status=0008 Ze status=0009 10:19:20 Check angles 10:19:20 SkyScan query 10:19:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.4<-15960 Statuses=0008 0009 10:19:21 Msec=3000 True Az=112.995 Ze=-59.4 Az status=0008 Ze status=0009 10:19:21 Check angles 10:19:21 SkyScan query 10:19:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.92<-14528 Statuses=0008 0009 10:19:22 Msec=3750 True Az=112.995 Ze=-37.92 Az status=0008 Ze status=0009 10:19:22 Check angles 10:19:22 SkyScan query 10:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.995<-13133 Statuses=0008 0009 10:19:23 Msec=4500 True Az=112.995 Ze=-16.995 Az status=0008 Ze status=0009 10:19:23 Check angles 10:19:23 SkyScan query 10:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=3.96<-11736 Statuses=0008 0009 10:19:23 Msec=5250 True Az=112.995 Ze=3.96 Az status=0008 Ze status=0009 10:19:24 Check angles 10:19:24 SkyScan query 10:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:19:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:19:24 Message to Master queued w/err=0: serial=273744 error=0 10:19:29 Received message from Master: op=Filter serial=273745 10:19:29 Color wheel filter change from 0 to 0 10:19:29 FLIGetFilterPos err=0 currentPosition=0 10:19:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:29 Filter is already there-color wheel unchanged 10:19:29 Received message from Master: op=Shutter serial=273746 10:19:29 Shutter LASER close 10:19:29 Received message from Camera: op=State serial=273748 10:19:29 GetSingleValue result=40 Value=cccccccc 10:19:29 SkyScan query 10:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:19:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:30 Parameters OK 10:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:30 Set A/D data flow result=40 10:19:30 Set A/D channel type result=40 10:19:30 Set A/D encoding result=40 10:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:30 Set channel filter=0.000000e+000 result=40 10:19:30 Config A/D Result=40 10:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:30 Get A/D filter: -9.255963e+061 result=40 10:19:30 Get A/D value=-858993460 result=40 10:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:30 Parameters OK 10:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:30 Set A/D data flow result=40 10:19:30 Set A/D channel type result=40 10:19:30 Set A/D encoding result=40 10:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:30 Set channel filter=0.000000e+000 result=40 10:19:30 Config A/D Result=40 10:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:30 Get A/D filter: -9.255963e+061 result=40 10:19:30 Get A/D value=-858993460 result=40 10:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:30 Aux= 10:19:30 Message to Camera, serial 273748 queued 10:20:07 Received message from Master: op=PointingHead serial=273761 10:20:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:07 Point started: ret=0 10:20:07 point_skyscan result=0 10:20:08 Check angles 10:20:08 SkyScan query 10:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:08 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:08 Message to Master queued w/err=0: serial=273761 error=0 10:20:13 Received message from Master: op=Filter serial=273762 10:20:13 Color wheel filter change from 0 to 0 10:20:13 FLIGetFilterPos err=0 currentPosition=0 10:20:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:13 Filter is already there-color wheel unchanged 10:20:14 Received message from Master: op=Shutter serial=273763 10:20:14 Shutter LASER close 10:20:14 Received message from Camera: op=State serial=273765 10:20:14 GetSingleValue result=40 Value=cccccccc 10:20:14 SkyScan query 10:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:14 Parameters OK 10:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:14 Set A/D data flow result=40 10:20:14 Set A/D channel type result=40 10:20:14 Set A/D encoding result=40 10:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:14 Set channel filter=0.000000e+000 result=40 10:20:14 Config A/D Result=40 10:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:14 Get A/D filter: -9.255963e+061 result=40 10:20:14 Get A/D value=-858993460 result=40 10:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:14 Parameters OK 10:20:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:14 Set A/D data flow result=40 10:20:14 Set A/D channel type result=40 10:20:14 Set A/D encoding result=40 10:20:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:14 Set channel filter=0.000000e+000 result=40 10:20:14 Config A/D Result=40 10:20:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:14 Get A/D filter: -9.255963e+061 result=40 10:20:14 Get A/D value=-858993460 result=40 10:20:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:14 Aux= 10:20:14 Message to Camera, serial 273765 queued 10:20:50 Received message from Master: op=PointingHead serial=273777 10:20:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:20:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:20:51 Point started: ret=0 10:20:51 point_skyscan result=0 10:20:51 Check angles 10:20:51 SkyScan query 10:20:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:20:52 Message to Master queued w/err=0: serial=273777 error=0 10:20:57 Received message from Master: op=Filter serial=273778 10:20:57 Color wheel filter change from 0 to 0 10:20:57 FLIGetFilterPos err=0 currentPosition=0 10:20:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:57 Filter is already there-color wheel unchanged 10:20:57 Received message from Master: op=Shutter serial=273779 10:20:57 Shutter LASER close 10:20:57 Received message from Camera: op=State serial=273781 10:20:57 GetSingleValue result=40 Value=cccccccc 10:20:57 SkyScan query 10:20:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:20:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:58 Parameters OK 10:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:58 Set A/D data flow result=40 10:20:58 Set A/D channel type result=40 10:20:58 Set A/D encoding result=40 10:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:58 Set channel filter=0.000000e+000 result=40 10:20:58 Config A/D Result=40 10:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:58 Get A/D filter: -9.255963e+061 result=40 10:20:58 Get A/D value=-858993460 result=40 10:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:58 Parameters OK 10:20:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:58 Set A/D data flow result=40 10:20:58 Set A/D channel type result=40 10:20:58 Set A/D encoding result=40 10:20:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:58 Set channel filter=0.000000e+000 result=40 10:20:58 Config A/D Result=40 10:20:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:58 Get A/D filter: -9.255963e+061 result=40 10:20:58 Get A/D value=-858993460 result=40 10:20:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:58 Aux= 10:20:58 Message to Camera, serial 273781 queued 10:21:34 Received message from Master: op=PointingHead serial=273794 10:21:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:21:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:21:35 Point started: ret=0 10:21:35 point_skyscan result=0 10:21:36 Check angles 10:21:36 SkyScan query 10:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:21:36 Message to Master queued w/err=0: serial=273794 error=0 10:21:41 Received message from Master: op=Filter serial=273795 10:21:41 Color wheel filter change from 0 to 0 10:21:41 FLIGetFilterPos err=0 currentPosition=0 10:21:41 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:41 Filter is already there-color wheel unchanged 10:21:41 Received message from Master: op=Shutter serial=273796 10:21:41 Shutter LASER close 10:21:41 Received message from Camera: op=State serial=273798 10:21:41 GetSingleValue result=40 Value=cccccccc 10:21:41 SkyScan query 10:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:21:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:42 Parameters OK 10:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:42 Set A/D data flow result=40 10:21:42 Set A/D channel type result=40 10:21:42 Set A/D encoding result=40 10:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:42 Set channel filter=0.000000e+000 result=40 10:21:42 Config A/D Result=40 10:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:42 Get A/D filter: -9.255963e+061 result=40 10:21:42 Get A/D value=-858993460 result=40 10:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:42 Parameters OK 10:21:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:42 Set A/D data flow result=40 10:21:42 Set A/D channel type result=40 10:21:42 Set A/D encoding result=40 10:21:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:42 Set channel filter=0.000000e+000 result=40 10:21:42 Config A/D Result=40 10:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:42 Get A/D filter: -9.255963e+061 result=40 10:21:42 Get A/D value=-858993460 result=40 10:21:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:42 Aux= 10:21:42 Message to Camera, serial 273798 queued 10:22:19 Received message from Master: op=PointingHead serial=273811 10:22:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:22:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:22:19 Point started: ret=0 10:22:19 point_skyscan result=0 10:22:20 Check angles 10:22:20 SkyScan query 10:22:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.595<-13573 Statuses=0008 0009 10:22:20 Msec=0 True Az=112.995 Ze=-23.595 Az status=0008 Ze status=0009 10:22:21 Check angles 10:22:21 SkyScan query 10:22:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 10:22:21 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 10:22:21 Check angles 10:22:21 SkyScan query 10:22:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.49<-16366 Statuses=0008 0009 10:22:22 Msec=1500 True Az=112.995 Ze=-65.49 Az status=0008 Ze status=0009 10:22:22 Check angles 10:22:22 SkyScan query 10:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.46<-17764 Statuses=0008 0009 10:22:23 Msec=2250 True Az=112.995 Ze=-86.46 Az status=0008 Ze status=0009 10:22:23 Check angles 10:22:23 SkyScan query 10:22:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 10:22:23 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 10:22:24 Check angles 10:22:24 SkyScan query 10:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 10:22:24 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 10:22:24 Check angles 10:22:24 SkyScan query 10:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 10:22:25 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 10:22:25 Check angles 10:22:25 SkyScan query 10:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 10:22:26 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 10:22:26 Check angles 10:22:26 SkyScan query 10:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:22:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:22:26 Message to Master queued w/err=0: serial=273811 error=0 10:22:31 Received message from Master: op=Filter serial=273812 10:22:31 Color wheel filter change from 0 to 0 10:22:31 FLIGetFilterPos err=0 currentPosition=0 10:22:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:31 Filter is already there-color wheel unchanged 10:22:32 Received message from Master: op=Shutter serial=273813 10:22:32 Shutter LASER open 10:22:32 Received message from Camera: op=State serial=273815 10:22:32 GetSingleValue result=40 Value=cccccccc 10:22:32 SkyScan query 10:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:22:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:32 Parameters OK 10:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:32 Set A/D data flow result=40 10:22:32 Set A/D channel type result=40 10:22:32 Set A/D encoding result=40 10:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:32 Set channel filter=0.000000e+000 result=40 10:22:32 Config A/D Result=40 10:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:32 Get A/D filter: -9.255963e+061 result=40 10:22:32 Get A/D value=-858993460 result=40 10:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:32 Parameters OK 10:22:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:32 Set A/D data flow result=40 10:22:32 Set A/D channel type result=40 10:22:32 Set A/D encoding result=40 10:22:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:32 Set channel filter=0.000000e+000 result=40 10:22:32 Config A/D Result=40 10:22:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:32 Get A/D filter: -9.255963e+061 result=40 10:22:32 Get A/D value=-858993460 result=40 10:22:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:32 Aux= 10:22:32 Message to Camera, serial 273815 queued 10:22:41 Received message from Master: op=Shutter serial=273825 10:22:41 Shutter LASER close 10:22:41 Received message from Master: op=PointingHead serial=273829 10:22:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:22:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:22:42 Point started: ret=0 10:22:42 point_skyscan result=0 10:22:43 Check angles 10:22:43 SkyScan query 10:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 10:22:43 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 10:22:43 Check angles 10:22:43 SkyScan query 10:22:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.205<-20147 Statuses=0008 0009 10:22:44 Msec=750 True Az=112.995 Ze=-122.205 Az status=0008 Ze status=0009 10:22:44 Check angles 10:22:44 SkyScan query 10:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.815<-18721 Statuses=0008 0009 10:22:45 Msec=1500 True Az=112.995 Ze=-100.815 Az status=0008 Ze status=0009 10:22:45 Check angles 10:22:45 SkyScan query 10:22:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.845<-17323 Statuses=0008 0009 10:22:45 Msec=2250 True Az=112.995 Ze=-79.845 Az status=0008 Ze status=0009 10:22:46 Check angles 10:22:46 SkyScan query 10:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.89<-15926 Statuses=0008 0009 10:22:46 Msec=3000 True Az=112.995 Ze=-58.89 Az status=0008 Ze status=0009 10:22:46 Check angles 10:22:46 SkyScan query 10:22:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.89<-14526 Statuses=0008 0009 10:22:47 Msec=3750 True Az=112.995 Ze=-37.89 Az status=0008 Ze status=0009 10:22:47 Check angles 10:22:47 SkyScan query 10:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.95<-13130 Statuses=0008 0009 10:22:48 Msec=4500 True Az=112.995 Ze=-16.95 Az status=0008 Ze status=0009 10:22:48 Check angles 10:22:48 SkyScan query 10:22:48 SkyScan query done: ret=0 az=112.995<-7533 ze=4.005<-11733 Statuses=0008 0009 10:22:48 Msec=5250 True Az=112.995 Ze=4.005 Az status=0008 Ze status=0009 10:22:49 Check angles 10:22:49 SkyScan query 10:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:22:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:22:49 Message to Master queued w/err=0: serial=273829 error=0 10:22:54 Received message from Master: op=Filter serial=273830 10:22:54 Color wheel filter change from 0 to 0 10:22:54 FLIGetFilterPos err=0 currentPosition=0 10:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:54 Filter is already there-color wheel unchanged 10:22:54 Received message from Master: op=Shutter serial=273831 10:22:54 Shutter LASER close 10:22:54 Received message from Camera: op=State serial=273833 10:22:54 GetSingleValue result=40 Value=cccccccc 10:22:54 SkyScan query 10:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:55 Parameters OK 10:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:55 Set A/D data flow result=40 10:22:55 Set A/D channel type result=40 10:22:55 Set A/D encoding result=40 10:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:55 Set channel filter=0.000000e+000 result=40 10:22:55 Config A/D Result=40 10:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:55 Get A/D filter: -9.255963e+061 result=40 10:22:55 Get A/D value=-858993460 result=40 10:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:55 Parameters OK 10:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:55 Set A/D data flow result=40 10:22:55 Set A/D channel type result=40 10:22:55 Set A/D encoding result=40 10:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:55 Set channel filter=0.000000e+000 result=40 10:22:55 Config A/D Result=40 10:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:55 Get A/D filter: -9.255963e+061 result=40 10:22:55 Get A/D value=-858993460 result=40 10:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:55 Aux= 10:22:55 Message to Camera, serial 273833 queued 10:23:32 Received message from Master: op=PointingHead serial=273846 10:23:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:23:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:23:32 Point started: ret=0 10:23:32 point_skyscan result=0 10:23:33 Check angles 10:23:33 SkyScan query 10:23:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:23:34 Message to Master queued w/err=0: serial=273846 error=0 10:23:39 Received message from Master: op=Filter serial=273847 10:23:39 Color wheel filter change from 0 to 0 10:23:39 FLIGetFilterPos err=0 currentPosition=0 10:23:39 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:39 Filter is already there-color wheel unchanged 10:23:39 Received message from Master: op=Shutter serial=273848 10:23:39 Shutter LASER close 10:23:39 Received message from Camera: op=State serial=273850 10:23:39 GetSingleValue result=40 Value=cccccccc 10:23:39 SkyScan query 10:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:23:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:39 Parameters OK 10:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:39 Set A/D data flow result=40 10:23:39 Set A/D channel type result=40 10:23:39 Set A/D encoding result=40 10:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:39 Set channel filter=0.000000e+000 result=40 10:23:39 Config A/D Result=40 10:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:39 Get A/D filter: -9.255963e+061 result=40 10:23:39 Get A/D value=-858993460 result=40 10:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:39 Parameters OK 10:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:39 Set A/D data flow result=40 10:23:39 Set A/D channel type result=40 10:23:39 Set A/D encoding result=40 10:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:39 Set channel filter=0.000000e+000 result=40 10:23:39 Config A/D Result=40 10:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:39 Get A/D filter: -9.255963e+061 result=40 10:23:39 Get A/D value=-858993460 result=40 10:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:39 Aux= 10:23:39 Message to Camera, serial 273850 queued [UTC 2019-3-14 10:23:48] 10:24:16 Received message from Master: op=PointingHead serial=273863 10:24:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:24:16 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:24:17 Point started: ret=0 10:24:17 point_skyscan result=0 10:24:17 Check angles 10:24:17 SkyScan query 10:24:18 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 10:24:18 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 10:24:18 Check angles 10:24:18 SkyScan query 10:24:19 SkyScan query done: ret=0 az=153.81<-10254 ze=-6.495<-12433 Statuses=0009 0008 10:24:19 Msec=750 True Az=153.81 Ze=-6.495 Az status=0009 Ze status=0008 10:24:19 Check angles 10:24:19 SkyScan query 10:24:19 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 10:24:19 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 10:24:20 Check angles 10:24:20 SkyScan query 10:24:20 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:24:20 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:24:20 Message to Master queued w/err=0: serial=273863 error=0 10:24:25 Received message from Master: op=Filter serial=273864 10:24:25 Color wheel filter change from 0 to 0 10:24:25 FLIGetFilterPos err=0 currentPosition=0 10:24:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:25 Filter is already there-color wheel unchanged 10:24:25 Received message from Master: op=Shutter serial=273865 10:24:25 Shutter LASER close 10:24:25 Received message from Camera: op=State serial=273867 10:24:25 GetSingleValue result=40 Value=cccccccc 10:24:25 SkyScan query 10:24:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:24:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:26 Parameters OK 10:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:26 Set A/D data flow result=40 10:24:26 Set A/D channel type result=40 10:24:26 Set A/D encoding result=40 10:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:26 Set channel filter=0.000000e+000 result=40 10:24:26 Config A/D Result=40 10:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:26 Get A/D filter: -9.255963e+061 result=40 10:24:26 Get A/D value=-858993460 result=40 10:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:26 Parameters OK 10:24:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:26 Set A/D data flow result=40 10:24:26 Set A/D channel type result=40 10:24:26 Set A/D encoding result=40 10:24:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:26 Set channel filter=0.000000e+000 result=40 10:24:26 Config A/D Result=40 10:24:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:26 Get A/D filter: -9.255963e+061 result=40 10:24:26 Get A/D value=-858993460 result=40 10:24:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:26 Aux= 10:24:26 Message to Camera, serial 273867 queued 10:25:03 Received message from Master: op=PointingHead serial=273880 10:25:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:25:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:25:03 Point started: ret=0 10:25:03 point_skyscan result=0 10:25:04 Check angles 10:25:04 SkyScan query 10:25:05 SkyScan query done: ret=0 az=153.12<-10208 ze=6.51<-11566 Statuses=0009 0008 10:25:05 Msec=0 True Az=153.12 Ze=6.51 Az status=0009 Ze status=0008 10:25:05 Check angles 10:25:05 SkyScan query 10:25:05 SkyScan query done: ret=0 az=135.705<-9047 ze=6.495<-11567 Statuses=0009 0008 10:25:05 Msec=750 True Az=135.705 Ze=6.495 Az status=0009 Ze status=0008 10:25:05 Check angles 10:25:05 SkyScan query 10:25:06 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 10:25:06 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 10:25:06 Check angles 10:25:06 SkyScan query 10:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:25:07 Message to Master queued w/err=0: serial=273880 error=0 10:25:12 Received message from Master: op=Filter serial=273881 10:25:12 Color wheel filter change from 0 to 0 10:25:12 FLIGetFilterPos err=0 currentPosition=0 10:25:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:12 Filter is already there-color wheel unchanged 10:25:12 Received message from Master: op=Shutter serial=273882 10:25:12 Shutter LASER close 10:25:12 Received message from Camera: op=State serial=273884 10:25:12 GetSingleValue result=40 Value=cccccccc 10:25:12 SkyScan query 10:25:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:25:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:13 Parameters OK 10:25:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:13 Set A/D data flow result=40 10:25:13 Set A/D channel type result=40 10:25:13 Set A/D encoding result=40 10:25:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:13 Set channel filter=0.000000e+000 result=40 10:25:13 Config A/D Result=40 10:25:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:13 Get A/D filter: -9.255963e+061 result=40 10:25:13 Get A/D value=-858993460 result=40 10:25:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:13 Parameters OK 10:25:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:13 Set A/D data flow result=40 10:25:13 Set A/D channel type result=40 10:25:13 Set A/D encoding result=40 10:25:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:13 Set channel filter=0.000000e+000 result=40 10:25:13 Config A/D Result=40 10:25:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:13 Get A/D filter: -9.255963e+061 result=40 10:25:13 Get A/D value=-858993460 result=40 10:25:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:13 Aux= 10:25:13 Message to Camera, serial 273884 queued 10:25:49 Received message from Master: op=PointingHead serial=273897 10:25:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:50 Point started: ret=0 10:25:50 point_skyscan result=0 10:25:51 Check angles 10:25:51 SkyScan query 10:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 10:25:51 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 10:25:51 Check angles 10:25:51 SkyScan query 10:25:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.655<-14977 Statuses=0008 0009 10:25:52 Msec=750 True Az=112.995 Ze=-44.655 Az status=0008 Ze status=0009 10:25:52 Check angles 10:25:52 SkyScan query 10:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.075<-16405 Statuses=0008 0009 10:25:53 Msec=1500 True Az=112.995 Ze=-66.075 Az status=0008 Ze status=0009 10:25:53 Check angles 10:25:53 SkyScan query 10:25:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.48<-17832 Statuses=0008 0009 10:25:53 Msec=2250 True Az=112.995 Ze=-87.48 Az status=0008 Ze status=0009 10:25:54 Check angles 10:25:54 SkyScan query 10:25:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.405<-19227 Statuses=0008 0009 10:25:54 Msec=3000 True Az=112.995 Ze=-108.405 Az status=0008 Ze status=0009 10:25:54 Check angles 10:25:54 SkyScan query 10:25:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.375<-20625 Statuses=0008 0009 10:25:55 Msec=3750 True Az=112.995 Ze=-129.375 Az status=0008 Ze status=0009 10:25:55 Check angles 10:25:55 SkyScan query 10:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.315<-22021 Statuses=0008 0009 10:25:56 Msec=4500 True Az=112.995 Ze=-150.315 Az status=0008 Ze status=0009 10:25:56 Check angles 10:25:56 SkyScan query 10:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.105<-23407 Statuses=0008 0009 10:25:56 Msec=5250 True Az=112.995 Ze=-171.105 Az status=0008 Ze status=0009 10:25:57 Check angles 10:25:57 SkyScan query 10:25:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:25:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:25:57 Message to Master queued w/err=0: serial=273897 error=0 10:26:02 Received message from Master: op=Filter serial=273898 10:26:02 Color wheel filter change from 0 to 0 10:26:02 FLIGetFilterPos err=0 currentPosition=0 10:26:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:02 Filter is already there-color wheel unchanged 10:26:02 Received message from Master: op=Shutter serial=273899 10:26:02 Shutter LASER open 10:26:02 Received message from Camera: op=State serial=273901 10:26:02 GetSingleValue result=40 Value=cccccccc 10:26:02 SkyScan query 10:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:26:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:03 Parameters OK 10:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:03 Set A/D data flow result=40 10:26:03 Set A/D channel type result=40 10:26:03 Set A/D encoding result=40 10:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:03 Set channel filter=0.000000e+000 result=40 10:26:03 Config A/D Result=40 10:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:03 Get A/D filter: -9.255963e+061 result=40 10:26:03 Get A/D value=-858993460 result=40 10:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:03 Parameters OK 10:26:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:03 Set A/D data flow result=40 10:26:03 Set A/D channel type result=40 10:26:03 Set A/D encoding result=40 10:26:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:03 Set channel filter=0.000000e+000 result=40 10:26:03 Config A/D Result=40 10:26:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:03 Get A/D filter: -9.255963e+061 result=40 10:26:03 Get A/D value=-858993460 result=40 10:26:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:03 Aux= 10:26:03 Message to Camera, serial 273901 queued 10:26:12 Received message from Master: op=Shutter serial=273911 10:26:12 Shutter LASER close 10:26:12 Received message from Master: op=PointingHead serial=273915 10:26:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:26:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:26:12 Point started: ret=0 10:26:12 point_skyscan result=0 10:26:13 Check angles 10:26:13 SkyScan query 10:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 10:26:14 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 10:26:14 Check angles 10:26:14 SkyScan query 10:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 10:26:14 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 10:26:15 Check angles 10:26:15 SkyScan query 10:26:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.41<-18694 Statuses=0008 0009 10:26:15 Msec=1500 True Az=112.995 Ze=-100.41 Az status=0008 Ze status=0009 10:26:15 Check angles 10:26:15 SkyScan query 10:26:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.425<-17295 Statuses=0008 0009 10:26:16 Msec=2250 True Az=112.995 Ze=-79.425 Az status=0008 Ze status=0009 10:26:16 Check angles 10:26:16 SkyScan query 10:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 10:26:17 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 10:26:17 Check angles 10:26:17 SkyScan query 10:26:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.155<-14477 Statuses=0008 0009 10:26:17 Msec=3750 True Az=112.995 Ze=-37.155 Az status=0008 Ze status=0009 10:26:18 Check angles 10:26:18 SkyScan query 10:26:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 10:26:18 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 10:26:18 Check angles 10:26:18 SkyScan query 10:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 10:26:19 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 10:26:19 Check angles 10:26:19 SkyScan query 10:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:26:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:26:20 Message to Master queued w/err=0: serial=273915 error=0 10:26:25 Received message from Master: op=Filter serial=273916 10:26:25 Color wheel filter change from 0 to 0 10:26:25 FLIGetFilterPos err=0 currentPosition=0 10:26:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:25 Filter is already there-color wheel unchanged 10:26:25 Received message from Master: op=Shutter serial=273917 10:26:25 Shutter LASER close 10:26:25 Received message from Camera: op=State serial=273919 10:26:25 GetSingleValue result=40 Value=cccccccc 10:26:25 SkyScan query 10:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:26:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:26 Parameters OK 10:26:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:26 Set A/D data flow result=40 10:26:26 Set A/D channel type result=40 10:26:26 Set A/D encoding result=40 10:26:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:26 Set channel filter=0.000000e+000 result=40 10:26:26 Config A/D Result=40 10:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:26 Get A/D filter: -9.255963e+061 result=40 10:26:26 Get A/D value=-858993460 result=40 10:26:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:26 Parameters OK 10:26:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:26 Set A/D data flow result=40 10:26:26 Set A/D channel type result=40 10:26:26 Set A/D encoding result=40 10:26:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:26 Set channel filter=0.000000e+000 result=40 10:26:26 Config A/D Result=40 10:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:26 Get A/D filter: -9.255963e+061 result=40 10:26:26 Get A/D value=-858993460 result=40 10:26:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:26 Aux= 10:26:26 Message to Camera, serial 273919 queued 10:27:02 Received message from Master: op=PointingHead serial=273932 10:27:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:03 Point started: ret=0 10:27:03 point_skyscan result=0 10:27:04 Check angles 10:27:04 SkyScan query 10:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:04 Message to Master queued w/err=0: serial=273932 error=0 10:27:09 Received message from Master: op=Filter serial=273933 10:27:09 Color wheel filter change from 0 to 0 10:27:09 FLIGetFilterPos err=0 currentPosition=0 10:27:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:09 Filter is already there-color wheel unchanged 10:27:09 Received message from Master: op=Shutter serial=273934 10:27:09 Shutter LASER close 10:27:09 Received message from Camera: op=State serial=273936 10:27:09 GetSingleValue result=40 Value=cccccccc 10:27:09 SkyScan query 10:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:10 Parameters OK 10:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:10 Set A/D data flow result=40 10:27:10 Set A/D channel type result=40 10:27:10 Set A/D encoding result=40 10:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:10 Set channel filter=0.000000e+000 result=40 10:27:10 Config A/D Result=40 10:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:10 Get A/D filter: -9.255963e+061 result=40 10:27:10 Get A/D value=-858993460 result=40 10:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:10 Parameters OK 10:27:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:10 Set A/D data flow result=40 10:27:10 Set A/D channel type result=40 10:27:10 Set A/D encoding result=40 10:27:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:10 Set channel filter=0.000000e+000 result=40 10:27:10 Config A/D Result=40 10:27:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:10 Get A/D filter: -9.255963e+061 result=40 10:27:10 Get A/D value=-858993460 result=40 10:27:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:10 Aux= 10:27:10 Message to Camera, serial 273936 queued 10:27:47 Received message from Master: op=PointingHead serial=273949 10:27:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:27:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:27:47 Point started: ret=0 10:27:47 point_skyscan result=0 10:27:48 Check angles 10:27:48 SkyScan query 10:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:27:48 Message to Master queued w/err=0: serial=273949 error=0 10:27:53 Received message from Master: op=Filter serial=273950 10:27:53 Color wheel filter change from 0 to 0 10:27:53 FLIGetFilterPos err=0 currentPosition=0 10:27:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:53 Filter is already there-color wheel unchanged 10:27:54 Received message from Master: op=Shutter serial=273951 10:27:54 Shutter LASER close 10:27:54 Received message from Camera: op=State serial=273953 10:27:54 GetSingleValue result=40 Value=cccccccc 10:27:54 SkyScan query 10:27:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:27:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:54 Parameters OK 10:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:54 Set A/D data flow result=40 10:27:54 Set A/D channel type result=40 10:27:54 Set A/D encoding result=40 10:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:54 Set channel filter=0.000000e+000 result=40 10:27:54 Config A/D Result=40 10:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:54 Get A/D filter: -9.255963e+061 result=40 10:27:54 Get A/D value=-858993460 result=40 10:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:54 Parameters OK 10:27:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:54 Set A/D data flow result=40 10:27:54 Set A/D channel type result=40 10:27:54 Set A/D encoding result=40 10:27:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:54 Set channel filter=0.000000e+000 result=40 10:27:54 Config A/D Result=40 10:27:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:54 Get A/D filter: -9.255963e+061 result=40 10:27:54 Get A/D value=-858993460 result=40 10:27:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:54 Aux= 10:27:54 Message to Camera, serial 273953 queued 10:28:31 Received message from Master: op=PointingHead serial=273966 10:28:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:28:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:28:31 Point started: ret=0 10:28:31 point_skyscan result=0 10:28:32 Check angles 10:28:32 SkyScan query 10:28:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:28:33 Message to Master queued w/err=0: serial=273966 error=0 10:28:38 Received message from Master: op=Filter serial=273967 10:28:38 Color wheel filter change from 0 to 0 10:28:38 FLIGetFilterPos err=0 currentPosition=0 10:28:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:38 Filter is already there-color wheel unchanged 10:28:38 Received message from Master: op=Shutter serial=273968 10:28:38 Shutter LASER close 10:28:38 Received message from Camera: op=State serial=273970 10:28:38 GetSingleValue result=40 Value=cccccccc 10:28:38 SkyScan query 10:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:28:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:39 Parameters OK 10:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:39 Set A/D data flow result=40 10:28:39 Set A/D channel type result=40 10:28:39 Set A/D encoding result=40 10:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:39 Set channel filter=0.000000e+000 result=40 10:28:39 Config A/D Result=40 10:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:39 Get A/D filter: -9.255963e+061 result=40 10:28:39 Get A/D value=-858993460 result=40 10:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:39 Parameters OK 10:28:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:39 Set A/D data flow result=40 10:28:39 Set A/D channel type result=40 10:28:39 Set A/D encoding result=40 10:28:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:39 Set channel filter=0.000000e+000 result=40 10:28:39 Config A/D Result=40 10:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:39 Get A/D filter: -9.255963e+061 result=40 10:28:39 Get A/D value=-858993460 result=40 10:28:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:39 Aux= 10:28:39 Message to Camera, serial 273970 queued 10:29:15 Received message from Master: op=PointingHead serial=273983 10:29:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:29:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:29:16 Point started: ret=0 10:29:16 point_skyscan result=0 10:29:16 Check angles 10:29:16 SkyScan query 10:29:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 10:29:17 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 10:29:17 Check angles 10:29:17 SkyScan query 10:29:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.295<-14953 Statuses=0008 0009 10:29:18 Msec=750 True Az=112.995 Ze=-44.295 Az status=0008 Ze status=0009 10:29:18 Check angles 10:29:18 SkyScan query 10:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.22<-16348 Statuses=0008 0009 10:29:19 Msec=1500 True Az=112.995 Ze=-65.22 Az status=0008 Ze status=0009 10:29:19 Check angles 10:29:19 SkyScan query 10:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.175<-17745 Statuses=0008 0009 10:29:19 Msec=2250 True Az=112.995 Ze=-86.175 Az status=0008 Ze status=0009 10:29:19 Check angles 10:29:19 SkyScan query 10:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.115<-19141 Statuses=0008 0009 10:29:20 Msec=3000 True Az=112.995 Ze=-107.115 Az status=0008 Ze status=0009 10:29:20 Check angles 10:29:20 SkyScan query 10:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.085<-20539 Statuses=0008 0009 10:29:21 Msec=3750 True Az=112.995 Ze=-128.085 Az status=0008 Ze status=0009 10:29:21 Check angles 10:29:21 SkyScan query 10:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.04<-21936 Statuses=0008 0009 10:29:22 Msec=4500 True Az=112.995 Ze=-149.04 Az status=0008 Ze status=0009 10:29:22 Check angles 10:29:22 SkyScan query 10:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.995<-23333 Statuses=0008 0009 10:29:22 Msec=5250 True Az=112.995 Ze=-169.995 Az status=0008 Ze status=0009 10:29:22 Check angles 10:29:22 SkyScan query 10:29:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:29:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:29:23 Message to Master queued w/err=0: serial=273983 error=0 10:29:28 Received message from Master: op=Filter serial=273984 10:29:28 Color wheel filter change from 0 to 0 10:29:28 FLIGetFilterPos err=0 currentPosition=0 10:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:28 Filter is already there-color wheel unchanged 10:29:28 Received message from Master: op=Shutter serial=273985 10:29:28 Shutter LASER open 10:29:28 Received message from Camera: op=State serial=273987 10:29:28 GetSingleValue result=40 Value=cccccccc 10:29:28 SkyScan query 10:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:29:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:29 Parameters OK 10:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:29 Set A/D data flow result=40 10:29:29 Set A/D channel type result=40 10:29:29 Set A/D encoding result=40 10:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:29 Set channel filter=0.000000e+000 result=40 10:29:29 Config A/D Result=40 10:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:29 Get A/D filter: -9.255963e+061 result=40 10:29:29 Get A/D value=-858993460 result=40 10:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:29 Parameters OK 10:29:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:29 Set A/D data flow result=40 10:29:29 Set A/D channel type result=40 10:29:29 Set A/D encoding result=40 10:29:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:29 Set channel filter=0.000000e+000 result=40 10:29:29 Config A/D Result=40 10:29:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:29 Get A/D filter: -9.255963e+061 result=40 10:29:29 Get A/D value=-858993460 result=40 10:29:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:29 Aux= 10:29:29 Message to Camera, serial 273987 queued 10:29:37 Received message from Master: op=Shutter serial=273997 10:29:37 Shutter LASER close 10:29:38 Received message from Master: op=PointingHead serial=274001 10:29:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:29:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:29:38 Point started: ret=0 10:29:38 point_skyscan result=0 10:29:39 Check angles 10:29:39 SkyScan query 10:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 10:29:40 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 10:29:40 Check angles 10:29:40 SkyScan query 10:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 10:29:40 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 10:29:41 Check angles 10:29:41 SkyScan query 10:29:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.19<-18746 Statuses=0008 0009 10:29:41 Msec=1500 True Az=112.995 Ze=-101.19 Az status=0008 Ze status=0009 10:29:41 Check angles 10:29:41 SkyScan query 10:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.205<-17347 Statuses=0008 0009 10:29:42 Msec=2250 True Az=112.995 Ze=-80.205 Az status=0008 Ze status=0009 10:29:42 Check angles 10:29:42 SkyScan query 10:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.265<-15951 Statuses=0008 0009 10:29:43 Msec=3000 True Az=112.995 Ze=-59.265 Az status=0008 Ze status=0009 10:29:43 Check angles 10:29:43 SkyScan query 10:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.22<-14548 Statuses=0008 0009 10:29:43 Msec=3750 True Az=112.995 Ze=-38.22 Az status=0008 Ze status=0009 10:29:44 Check angles 10:29:44 SkyScan query 10:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 10:29:44 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 10:29:44 Check angles 10:29:44 SkyScan query 10:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=3.69<-11754 Statuses=0008 0009 10:29:45 Msec=5250 True Az=112.995 Ze=3.69 Az status=0008 Ze status=0009 10:29:45 Check angles 10:29:45 SkyScan query 10:29:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:29:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:29:46 Message to Master queued w/err=0: serial=274001 error=0 10:29:51 Received message from Master: op=Filter serial=274002 10:29:51 Color wheel filter change from 0 to 0 10:29:51 FLIGetFilterPos err=0 currentPosition=0 10:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:51 Filter is already there-color wheel unchanged 10:29:51 Received message from Master: op=Shutter serial=274003 10:29:51 Shutter LASER close 10:29:51 Received message from Camera: op=State serial=274005 10:29:51 GetSingleValue result=40 Value=cccccccc 10:29:51 SkyScan query 10:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:52 Parameters OK 10:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:52 Set A/D data flow result=40 10:29:52 Set A/D channel type result=40 10:29:52 Set A/D encoding result=40 10:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:52 Set channel filter=0.000000e+000 result=40 10:29:52 Config A/D Result=40 10:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:52 Get A/D filter: -9.255963e+061 result=40 10:29:52 Get A/D value=-858993460 result=40 10:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:52 Parameters OK 10:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:52 Set A/D data flow result=40 10:29:52 Set A/D channel type result=40 10:29:52 Set A/D encoding result=40 10:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:52 Set channel filter=0.000000e+000 result=40 10:29:52 Config A/D Result=40 10:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:52 Get A/D filter: -9.255963e+061 result=40 10:29:52 Get A/D value=-858993460 result=40 10:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:52 Aux= 10:29:52 Message to Camera, serial 274005 queued 10:30:29 Received message from Master: op=PointingHead serial=274018 10:30:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:30:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:30:29 Point started: ret=0 10:30:29 point_skyscan result=0 10:30:30 Check angles 10:30:30 SkyScan query 10:30:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:30:30 Message to Master queued w/err=0: serial=274018 error=0 10:30:35 Received message from Master: op=Filter serial=274019 10:30:35 Color wheel filter change from 0 to 0 10:30:35 FLIGetFilterPos err=0 currentPosition=0 10:30:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:35 Filter is already there-color wheel unchanged 10:30:35 Received message from Master: op=Shutter serial=274020 10:30:35 Shutter LASER close 10:30:35 Received message from Camera: op=State serial=274022 10:30:35 GetSingleValue result=40 Value=cccccccc 10:30:35 SkyScan query 10:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:30:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:36 Parameters OK 10:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:36 Set A/D data flow result=40 10:30:36 Set A/D channel type result=40 10:30:36 Set A/D encoding result=40 10:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:36 Set channel filter=0.000000e+000 result=40 10:30:36 Config A/D Result=40 10:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:36 Get A/D filter: -9.255963e+061 result=40 10:30:36 Get A/D value=-858993460 result=40 10:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:36 Parameters OK 10:30:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:36 Set A/D data flow result=40 10:30:36 Set A/D channel type result=40 10:30:36 Set A/D encoding result=40 10:30:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:36 Set channel filter=0.000000e+000 result=40 10:30:36 Config A/D Result=40 10:30:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:36 Get A/D filter: -9.255963e+061 result=40 10:30:36 Get A/D value=-858993460 result=40 10:30:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:36 Aux= 10:30:36 Message to Camera, serial 274022 queued 10:31:13 Received message from Master: op=PointingHead serial=274035 10:31:13 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:31:13 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:31:13 Point started: ret=0 10:31:13 point_skyscan result=0 10:31:14 Check angles 10:31:14 SkyScan query 10:31:14 SkyScan query done: ret=0 az=135.9<-9060 ze=-6.51<-12434 Statuses=0009 0008 10:31:14 Msec=0 True Az=135.9 Ze=-6.51 Az status=0009 Ze status=0008 10:31:15 Check angles 10:31:15 SkyScan query 10:31:15 SkyScan query done: ret=0 az=153.45<-10230 ze=-6.495<-12433 Statuses=0009 0008 10:31:15 Msec=750 True Az=153.45 Ze=-6.495 Az status=0009 Ze status=0008 10:31:15 Check angles 10:31:15 SkyScan query 10:31:16 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 10:31:16 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 10:31:16 Check angles 10:31:16 SkyScan query 10:31:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:31:17 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:31:17 Message to Master queued w/err=0: serial=274035 error=0 10:31:22 Received message from Master: op=Filter serial=274036 10:31:22 Color wheel filter change from 0 to 0 10:31:22 FLIGetFilterPos err=0 currentPosition=0 10:31:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:22 Filter is already there-color wheel unchanged 10:31:22 Received message from Master: op=Shutter serial=274037 10:31:22 Shutter LASER close 10:31:22 Received message from Camera: op=State serial=274039 10:31:22 GetSingleValue result=40 Value=cccccccc 10:31:22 SkyScan query 10:31:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:31:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:23 Parameters OK 10:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:23 Set A/D data flow result=40 10:31:23 Set A/D channel type result=40 10:31:23 Set A/D encoding result=40 10:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:23 Set channel filter=0.000000e+000 result=40 10:31:23 Config A/D Result=40 10:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:23 Get A/D filter: -9.255963e+061 result=40 10:31:23 Get A/D value=-858993460 result=40 10:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:23 Parameters OK 10:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:23 Set A/D data flow result=40 10:31:23 Set A/D channel type result=40 10:31:23 Set A/D encoding result=40 10:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:23 Set channel filter=0.000000e+000 result=40 10:31:23 Config A/D Result=40 10:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:23 Get A/D filter: -9.255963e+061 result=40 10:31:23 Get A/D value=-858993460 result=40 10:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:23 Aux= 10:31:23 Message to Camera, serial 274039 queued 10:31:59 Received message from Master: op=PointingHead serial=274052 10:31:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:31:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:32:00 Point started: ret=0 10:32:00 point_skyscan result=0 10:32:01 Check angles 10:32:01 SkyScan query 10:32:01 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 10:32:01 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 10:32:01 Check angles 10:32:01 SkyScan query 10:32:02 SkyScan query done: ret=0 az=135.315<-9021 ze=6.495<-11567 Statuses=0009 0008 10:32:02 Msec=750 True Az=135.315 Ze=6.495 Az status=0009 Ze status=0008 10:32:02 Check angles 10:32:02 SkyScan query 10:32:03 SkyScan query done: ret=0 az=117.405<-7827 ze=6.495<-11567 Statuses=0009 0008 10:32:03 Msec=1500 True Az=117.405 Ze=6.495 Az status=0009 Ze status=0008 10:32:03 Check angles 10:32:03 SkyScan query 10:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:32:03 Message to Master queued w/err=0: serial=274052 error=0 10:32:08 Received message from Master: op=Filter serial=274053 10:32:08 Color wheel filter change from 0 to 0 10:32:08 FLIGetFilterPos err=0 currentPosition=0 10:32:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:08 Filter is already there-color wheel unchanged 10:32:09 Received message from Master: op=Shutter serial=274054 10:32:09 Shutter LASER close 10:32:09 Received message from Camera: op=State serial=274056 10:32:09 GetSingleValue result=40 Value=cccccccc 10:32:09 SkyScan query 10:32:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:32:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:09 Parameters OK 10:32:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:09 Set A/D data flow result=40 10:32:09 Set A/D channel type result=40 10:32:09 Set A/D encoding result=40 10:32:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:09 Set channel filter=0.000000e+000 result=40 10:32:09 Config A/D Result=40 10:32:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:09 Get A/D filter: -9.255963e+061 result=40 10:32:09 Get A/D value=-858993460 result=40 10:32:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:09 Parameters OK 10:32:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:09 Set A/D data flow result=40 10:32:09 Set A/D channel type result=40 10:32:09 Set A/D encoding result=40 10:32:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:09 Set channel filter=0.000000e+000 result=40 10:32:09 Config A/D Result=40 10:32:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:09 Get A/D filter: -9.255963e+061 result=40 10:32:09 Get A/D value=-858993460 result=40 10:32:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:09 Aux= 10:32:09 Message to Camera, serial 274056 queued 10:32:46 Received message from Master: op=PointingHead serial=274069 10:32:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:32:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:32:46 Point started: ret=0 10:32:46 point_skyscan result=0 10:32:47 Check angles 10:32:47 SkyScan query 10:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 10:32:48 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 10:32:48 Check angles 10:32:48 SkyScan query 10:32:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.255<-15017 Statuses=0008 0009 10:32:48 Msec=750 True Az=112.995 Ze=-45.255 Az status=0008 Ze status=0009 10:32:49 Check angles 10:32:49 SkyScan query 10:32:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 10:32:49 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 10:32:49 Check angles 10:32:49 SkyScan query 10:32:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 10:32:50 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 10:32:50 Check angles 10:32:50 SkyScan query 10:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.075<-19205 Statuses=0008 0009 10:32:51 Msec=3000 True Az=112.995 Ze=-108.075 Az status=0008 Ze status=0009 10:32:51 Check angles 10:32:51 SkyScan query 10:32:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 10:32:51 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 10:32:52 Check angles 10:32:52 SkyScan query 10:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.765<-22051 Statuses=0008 0009 10:32:52 Msec=4500 True Az=112.995 Ze=-150.765 Az status=0008 Ze status=0009 10:32:52 Check angles 10:32:52 SkyScan query 10:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.765<-23451 Statuses=0008 0009 10:32:53 Msec=5250 True Az=112.995 Ze=-171.765 Az status=0008 Ze status=0009 10:32:53 Check angles 10:32:53 SkyScan query 10:32:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:32:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:32:54 Message to Master queued w/err=0: serial=274069 error=0 10:32:59 Received message from Master: op=Filter serial=274070 10:32:59 Color wheel filter change from 0 to 0 10:32:59 FLIGetFilterPos err=0 currentPosition=0 10:32:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:59 Filter is already there-color wheel unchanged 10:32:59 Received message from Master: op=Shutter serial=274071 10:32:59 Shutter LASER open 10:32:59 Received message from Camera: op=State serial=274073 10:32:59 GetSingleValue result=40 Value=cccccccc 10:32:59 SkyScan query 10:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:33:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:00 Parameters OK 10:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:00 Set A/D data flow result=40 10:33:00 Set A/D channel type result=40 10:33:00 Set A/D encoding result=40 10:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:00 Set channel filter=0.000000e+000 result=40 10:33:00 Config A/D Result=40 10:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:00 Get A/D filter: -9.255963e+061 result=40 10:33:00 Get A/D value=-858993460 result=40 10:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:00 Parameters OK 10:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:00 Set A/D data flow result=40 10:33:00 Set A/D channel type result=40 10:33:00 Set A/D encoding result=40 10:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:00 Set channel filter=0.000000e+000 result=40 10:33:00 Config A/D Result=40 10:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:00 Get A/D filter: -9.255963e+061 result=40 10:33:00 Get A/D value=-858993460 result=40 10:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:00 Aux= 10:33:00 Message to Camera, serial 274073 queued 10:33:08 Received message from Master: op=Shutter serial=274083 10:33:08 Shutter LASER close 10:33:09 Received message from Master: op=PointingHead serial=274087 10:33:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:09 Point started: ret=0 10:33:09 point_skyscan result=0 10:33:10 Check angles 10:33:10 SkyScan query 10:33:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 10:33:10 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 10:33:10 Check angles 10:33:10 SkyScan query 10:33:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.265<-20151 Statuses=0008 0009 10:33:11 Msec=750 True Az=112.995 Ze=-122.265 Az status=0008 Ze status=0009 10:33:11 Check angles 10:33:11 SkyScan query 10:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.325<-18755 Statuses=0008 0009 10:33:12 Msec=1500 True Az=112.995 Ze=-101.325 Az status=0008 Ze status=0009 10:33:12 Check angles 10:33:12 SkyScan query 10:33:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.83<-17322 Statuses=0008 0009 10:33:12 Msec=2250 True Az=112.995 Ze=-79.83 Az status=0008 Ze status=0009 10:33:13 Check angles 10:33:13 SkyScan query 10:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.95<-15930 Statuses=0008 0009 10:33:13 Msec=3000 True Az=112.995 Ze=-58.95 Az status=0008 Ze status=0009 10:33:13 Check angles 10:33:13 SkyScan query 10:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.935<-14529 Statuses=0008 0009 10:33:14 Msec=3750 True Az=112.995 Ze=-37.935 Az status=0008 Ze status=0009 10:33:14 Check angles 10:33:14 SkyScan query 10:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 10:33:15 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 10:33:15 Check angles 10:33:15 SkyScan query 10:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 10:33:15 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 10:33:16 Check angles 10:33:16 SkyScan query 10:33:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:33:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:33:16 Message to Master queued w/err=0: serial=274087 error=0 10:33:21 Received message from Master: op=Filter serial=274088 10:33:21 Color wheel filter change from 0 to 0 10:33:21 FLIGetFilterPos err=0 currentPosition=0 10:33:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:21 Filter is already there-color wheel unchanged 10:33:21 Received message from Master: op=Shutter serial=274089 10:33:21 Shutter LASER close 10:33:22 Received message from Camera: op=State serial=274091 10:33:22 GetSingleValue result=40 Value=cccccccc 10:33:22 SkyScan query 10:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:22 Parameters OK 10:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:22 Set A/D data flow result=40 10:33:22 Set A/D channel type result=40 10:33:22 Set A/D encoding result=40 10:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:22 Set channel filter=0.000000e+000 result=40 10:33:22 Config A/D Result=40 10:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:22 Get A/D filter: -9.255963e+061 result=40 10:33:22 Get A/D value=-858993460 result=40 10:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:22 Parameters OK 10:33:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:22 Set A/D data flow result=40 10:33:22 Set A/D channel type result=40 10:33:22 Set A/D encoding result=40 10:33:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:22 Set channel filter=0.000000e+000 result=40 10:33:22 Config A/D Result=40 10:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:22 Get A/D filter: -9.255963e+061 result=40 10:33:22 Get A/D value=-858993460 result=40 10:33:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:22 Aux= 10:33:22 Message to Camera, serial 274091 queued 10:33:35 Received message from Master: op=Identify serial=274092 10:33:59 Received message from Master: op=PointingHead serial=274107 10:33:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:33:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:33:59 Point started: ret=0 10:33:59 point_skyscan result=0 10:34:00 Check angles 10:34:00 SkyScan query 10:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:34:01 Message to Master queued w/err=0: serial=274107 error=0 10:34:06 Received message from Master: op=Filter serial=274108 10:34:06 Color wheel filter change from 0 to 0 10:34:06 FLIGetFilterPos err=0 currentPosition=0 10:34:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:06 Filter is already there-color wheel unchanged 10:34:06 Received message from Master: op=Shutter serial=274109 10:34:06 Shutter LASER close 10:34:06 Received message from Camera: op=State serial=274111 10:34:06 GetSingleValue result=40 Value=cccccccc 10:34:06 SkyScan query 10:34:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:06 Parameters OK 10:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:06 Set A/D data flow result=40 10:34:06 Set A/D channel type result=40 10:34:06 Set A/D encoding result=40 10:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:06 Set channel filter=0.000000e+000 result=40 10:34:06 Config A/D Result=40 10:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:06 Get A/D filter: -9.255963e+061 result=40 10:34:06 Get A/D value=-858993460 result=40 10:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:06 Parameters OK 10:34:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:06 Set A/D data flow result=40 [UTC 2019-3-14 10:34:06] 10:34:06 Set A/D channel type result=40 10:34:06 Set A/D encoding result=40 10:34:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:06 Set channel filter=0.000000e+000 result=40 10:34:06 Config A/D Result=40 10:34:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:06 Get A/D filter: -9.255963e+061 result=40 10:34:06 Get A/D value=-858993460 result=40 10:34:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:06 Aux= 10:34:06 Message to Camera, serial 274111 queued 10:34:42 Received message from Master: op=PointingHead serial=274123 10:34:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:34:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:34:43 Point started: ret=0 10:34:43 point_skyscan result=0 10:34:43 Check angles 10:34:43 SkyScan query 10:34:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:34:44 Message to Master queued w/err=0: serial=274123 error=0 10:34:49 Received message from Master: op=Filter serial=274124 10:34:49 Color wheel filter change from 0 to 0 10:34:49 FLIGetFilterPos err=0 currentPosition=0 10:34:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:49 Filter is already there-color wheel unchanged 10:34:49 Received message from Master: op=Shutter serial=274125 10:34:49 Shutter LASER close 10:34:49 Received message from Camera: op=State serial=274127 10:34:49 GetSingleValue result=40 Value=cccccccc 10:34:49 SkyScan query 10:34:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:34:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:50 Parameters OK 10:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:50 Set A/D data flow result=40 10:34:50 Set A/D channel type result=40 10:34:50 Set A/D encoding result=40 10:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:50 Set channel filter=0.000000e+000 result=40 10:34:50 Config A/D Result=40 10:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:50 Get A/D filter: -9.255963e+061 result=40 10:34:50 Get A/D value=-858993460 result=40 10:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:50 Parameters OK 10:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:50 Set A/D data flow result=40 10:34:50 Set A/D channel type result=40 10:34:50 Set A/D encoding result=40 10:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:50 Set channel filter=0.000000e+000 result=40 10:34:50 Config A/D Result=40 10:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:50 Get A/D filter: -9.255963e+061 result=40 10:34:50 Get A/D value=-858993460 result=40 10:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:50 Aux= 10:34:50 Message to Camera, serial 274127 queued 10:35:27 Received message from Master: op=PointingHead serial=274140 10:35:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:35:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:35:27 Point started: ret=0 10:35:27 point_skyscan result=0 10:35:28 Check angles 10:35:28 SkyScan query 10:35:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:35:28 Message to Master queued w/err=0: serial=274140 error=0 10:35:33 Received message from Master: op=Filter serial=274141 10:35:33 Color wheel filter change from 0 to 0 10:35:33 FLIGetFilterPos err=0 currentPosition=0 10:35:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:33 Filter is already there-color wheel unchanged 10:35:34 Received message from Master: op=Shutter serial=274142 10:35:34 Shutter LASER close 10:35:34 Received message from Camera: op=State serial=274144 10:35:34 GetSingleValue result=40 Value=cccccccc 10:35:34 SkyScan query 10:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:34 Parameters OK 10:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:34 Set A/D data flow result=40 10:35:34 Set A/D channel type result=40 10:35:34 Set A/D encoding result=40 10:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:34 Set channel filter=0.000000e+000 result=40 10:35:34 Config A/D Result=40 10:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:34 Get A/D filter: -9.255963e+061 result=40 10:35:34 Get A/D value=-858993460 result=40 10:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:34 Parameters OK 10:35:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:34 Set A/D data flow result=40 10:35:34 Set A/D channel type result=40 10:35:34 Set A/D encoding result=40 10:35:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:34 Set channel filter=0.000000e+000 result=40 10:35:34 Config A/D Result=40 10:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:34 Get A/D filter: -9.255963e+061 result=40 10:35:34 Get A/D value=-858993460 result=40 10:35:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:34 Aux= 10:35:34 Message to Camera, serial 274144 queued 10:36:11 Received message from Master: op=PointingHead serial=274157 10:36:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:36:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:36:11 Point started: ret=0 10:36:11 point_skyscan result=0 10:36:12 Check angles 10:36:12 SkyScan query 10:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 10:36:13 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 10:36:13 Check angles 10:36:13 SkyScan query 10:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 10:36:13 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 10:36:14 Check angles 10:36:14 SkyScan query 10:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 10:36:14 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 10:36:14 Check angles 10:36:14 SkyScan query 10:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.965<-17731 Statuses=0008 0009 10:36:15 Msec=2250 True Az=112.995 Ze=-85.965 Az status=0008 Ze status=0009 10:36:15 Check angles 10:36:15 SkyScan query 10:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.89<-19126 Statuses=0008 0009 10:36:16 Msec=3000 True Az=112.995 Ze=-106.89 Az status=0008 Ze status=0009 10:36:16 Check angles 10:36:16 SkyScan query 10:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 10:36:16 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 10:36:17 Check angles 10:36:17 SkyScan query 10:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 10:36:17 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 10:36:17 Check angles 10:36:17 SkyScan query 10:36:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 10:36:18 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 10:36:18 Check angles 10:36:18 SkyScan query 10:36:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:36:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:36:19 Message to Master queued w/err=0: serial=274157 error=0 10:36:24 Received message from Master: op=Filter serial=274158 10:36:24 Color wheel filter change from 0 to 0 10:36:24 FLIGetFilterPos err=0 currentPosition=0 10:36:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:24 Filter is already there-color wheel unchanged 10:36:24 Received message from Master: op=Shutter serial=274159 10:36:24 Shutter LASER open 10:36:24 Received message from Camera: op=State serial=274161 10:36:24 GetSingleValue result=40 Value=cccccccc 10:36:24 SkyScan query 10:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:36:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:25 Parameters OK 10:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:25 Set A/D data flow result=40 10:36:25 Set A/D channel type result=40 10:36:25 Set A/D encoding result=40 10:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:25 Set channel filter=0.000000e+000 result=40 10:36:25 Config A/D Result=40 10:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:25 Get A/D filter: -9.255963e+061 result=40 10:36:25 Get A/D value=-858993460 result=40 10:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:25 Parameters OK 10:36:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:25 Set A/D data flow result=40 10:36:25 Set A/D channel type result=40 10:36:25 Set A/D encoding result=40 10:36:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:25 Set channel filter=0.000000e+000 result=40 10:36:25 Config A/D Result=40 10:36:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:25 Get A/D filter: -9.255963e+061 result=40 10:36:25 Get A/D value=-858993460 result=40 10:36:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:25 Aux= 10:36:25 Message to Camera, serial 274161 queued 10:36:33 Received message from Master: op=Shutter serial=274171 10:36:33 Shutter LASER close 10:36:34 Received message from Master: op=PointingHead serial=274175 10:36:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:36:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:36:34 Point started: ret=0 10:36:34 point_skyscan result=0 10:36:35 Check angles 10:36:35 SkyScan query 10:36:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 10:36:35 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 10:36:35 Check angles 10:36:35 SkyScan query 10:36:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 10:36:36 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 10:36:36 Check angles 10:36:36 SkyScan query 10:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.46<-18764 Statuses=0008 0009 10:36:37 Msec=1500 True Az=112.995 Ze=-101.46 Az status=0008 Ze status=0009 10:36:37 Check angles 10:36:37 SkyScan query 10:36:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 10:36:37 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 10:36:38 Check angles 10:36:38 SkyScan query 10:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.55<-15970 Statuses=0008 0009 10:36:38 Msec=3000 True Az=112.995 Ze=-59.55 Az status=0008 Ze status=0009 10:36:38 Check angles 10:36:38 SkyScan query 10:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.58<-14572 Statuses=0008 0009 10:36:39 Msec=3750 True Az=112.995 Ze=-38.58 Az status=0008 Ze status=0009 10:36:39 Check angles 10:36:39 SkyScan query 10:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.625<-13175 Statuses=0008 0009 10:36:40 Msec=4500 True Az=112.995 Ze=-17.625 Az status=0008 Ze status=0009 10:36:40 Check angles 10:36:40 SkyScan query 10:36:40 SkyScan query done: ret=0 az=112.995<-7533 ze=3.345<-11777 Statuses=0008 0009 10:36:40 Msec=5250 True Az=112.995 Ze=3.345 Az status=0008 Ze status=0009 10:36:41 Check angles 10:36:41 SkyScan query 10:36:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:36:41 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:36:41 Message to Master queued w/err=0: serial=274175 error=0 10:36:46 Received message from Master: op=Filter serial=274176 10:36:46 Color wheel filter change from 0 to 0 10:36:46 FLIGetFilterPos err=0 currentPosition=0 10:36:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:46 Filter is already there-color wheel unchanged 10:36:46 Received message from Master: op=Shutter serial=274177 10:36:46 Shutter LASER close 10:36:47 Received message from Camera: op=State serial=274179 10:36:47 GetSingleValue result=40 Value=cccccccc 10:36:47 SkyScan query 10:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:36:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:47 Parameters OK 10:36:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:47 Set A/D data flow result=40 10:36:47 Set A/D channel type result=40 10:36:47 Set A/D encoding result=40 10:36:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:47 Set channel filter=0.000000e+000 result=40 10:36:47 Config A/D Result=40 10:36:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:47 Get A/D filter: -9.255963e+061 result=40 10:36:47 Get A/D value=-858993460 result=40 10:36:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:47 Parameters OK 10:36:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:47 Set A/D data flow result=40 10:36:47 Set A/D channel type result=40 10:36:47 Set A/D encoding result=40 10:36:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:47 Set channel filter=0.000000e+000 result=40 10:36:47 Config A/D Result=40 10:36:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:47 Get A/D filter: -9.255963e+061 result=40 10:36:47 Get A/D value=-858993460 result=40 10:36:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:47 Aux= 10:36:47 Message to Camera, serial 274179 queued 10:37:24 Received message from Master: op=PointingHead serial=274192 10:37:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:37:24 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:37:24 Point started: ret=0 10:37:24 point_skyscan result=0 10:37:25 Check angles 10:37:25 SkyScan query 10:37:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:37:26 Message to Master queued w/err=0: serial=274192 error=0 10:37:31 Received message from Master: op=Filter serial=274193 10:37:31 Color wheel filter change from 0 to 0 10:37:31 FLIGetFilterPos err=0 currentPosition=0 10:37:31 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:31 Filter is already there-color wheel unchanged 10:37:31 Received message from Master: op=Shutter serial=274194 10:37:31 Shutter LASER close 10:37:31 Received message from Camera: op=State serial=274196 10:37:31 GetSingleValue result=40 Value=cccccccc 10:37:31 SkyScan query 10:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:37:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:31 Parameters OK 10:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:31 Set A/D data flow result=40 10:37:31 Set A/D channel type result=40 10:37:31 Set A/D encoding result=40 10:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:31 Set channel filter=0.000000e+000 result=40 10:37:31 Config A/D Result=40 10:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:31 Get A/D filter: -9.255963e+061 result=40 10:37:31 Get A/D value=-858993460 result=40 10:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:31 Parameters OK 10:37:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:31 Set A/D data flow result=40 10:37:31 Set A/D channel type result=40 10:37:31 Set A/D encoding result=40 10:37:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:31 Set channel filter=0.000000e+000 result=40 10:37:31 Config A/D Result=40 10:37:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:31 Get A/D filter: -9.255963e+061 result=40 10:37:31 Get A/D value=-858993460 result=40 10:37:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:31 Aux= 10:37:31 Message to Camera, serial 274196 queued 10:38:08 Received message from Master: op=PointingHead serial=274209 10:38:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:38:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:38:09 Point started: ret=0 10:38:09 point_skyscan result=0 10:38:09 Check angles 10:38:09 SkyScan query 10:38:10 SkyScan query done: ret=0 az=135.705<-9047 ze=-6.51<-12434 Statuses=0009 0008 10:38:10 Msec=0 True Az=135.705 Ze=-6.51 Az status=0009 Ze status=0008 10:38:10 Check angles 10:38:10 SkyScan query 10:38:11 SkyScan query done: ret=0 az=153.645<-10243 ze=-6.495<-12433 Statuses=0009 0008 10:38:11 Msec=750 True Az=153.645 Ze=-6.495 Az status=0009 Ze status=0008 10:38:11 Check angles 10:38:11 SkyScan query 10:38:11 SkyScan query done: ret=0 az=170.955<-11397 ze=-6.495<-12433 Statuses=0009 0008 10:38:11 Msec=1500 True Az=170.955 Ze=-6.495 Az status=0009 Ze status=0008 10:38:12 Check angles 10:38:12 SkyScan query 10:38:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:38:12 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:38:12 Message to Master queued w/err=0: serial=274209 error=0 10:38:17 Received message from Master: op=Filter serial=274210 10:38:17 Color wheel filter change from 0 to 0 10:38:17 FLIGetFilterPos err=0 currentPosition=0 10:38:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:17 Filter is already there-color wheel unchanged 10:38:17 Received message from Master: op=Shutter serial=274211 10:38:17 Shutter LASER close 10:38:17 Received message from Camera: op=State serial=274213 10:38:17 GetSingleValue result=40 Value=cccccccc 10:38:17 SkyScan query 10:38:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:38:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:18 Parameters OK 10:38:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:18 Set A/D data flow result=40 10:38:18 Set A/D channel type result=40 10:38:18 Set A/D encoding result=40 10:38:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:18 Set channel filter=0.000000e+000 result=40 10:38:18 Config A/D Result=40 10:38:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:18 Get A/D filter: -9.255963e+061 result=40 10:38:18 Get A/D value=-858993460 result=40 10:38:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:18 Parameters OK 10:38:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:18 Set A/D data flow result=40 10:38:18 Set A/D channel type result=40 10:38:18 Set A/D encoding result=40 10:38:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:18 Set channel filter=0.000000e+000 result=40 10:38:18 Config A/D Result=40 10:38:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:18 Get A/D filter: -9.255963e+061 result=40 10:38:18 Get A/D value=-858993460 result=40 10:38:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:18 Aux= 10:38:18 Message to Camera, serial 274213 queued 10:38:55 Received message from Master: op=PointingHead serial=274226 10:38:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:38:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:38:55 Point started: ret=0 10:38:55 point_skyscan result=0 10:38:56 Check angles 10:38:56 SkyScan query 10:38:57 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 10:38:57 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 10:38:57 Check angles 10:38:57 SkyScan query 10:38:57 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 10:38:57 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 10:38:58 Check angles 10:38:58 SkyScan query 10:38:58 SkyScan query done: ret=0 az=118.035<-7869 ze=6.495<-11567 Statuses=0009 0008 10:38:58 Msec=1500 True Az=118.035 Ze=6.495 Az status=0009 Ze status=0008 10:38:58 Check angles 10:38:58 SkyScan query 10:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:38:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:38:59 Message to Master queued w/err=0: serial=274226 error=0 10:39:04 Received message from Master: op=Filter serial=274227 10:39:04 Color wheel filter change from 0 to 0 10:39:04 FLIGetFilterPos err=0 currentPosition=0 10:39:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:04 Filter is already there-color wheel unchanged 10:39:04 Received message from Master: op=Shutter serial=274228 10:39:04 Shutter LASER close 10:39:04 Received message from Camera: op=State serial=274230 10:39:04 GetSingleValue result=40 Value=cccccccc 10:39:04 SkyScan query 10:39:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:39:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:05 Parameters OK 10:39:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:05 Set A/D data flow result=40 10:39:05 Set A/D channel type result=40 10:39:05 Set A/D encoding result=40 10:39:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:05 Set channel filter=0.000000e+000 result=40 10:39:05 Config A/D Result=40 10:39:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:05 Get A/D filter: -9.255963e+061 result=40 10:39:05 Get A/D value=-858993460 result=40 10:39:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:05 Parameters OK 10:39:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:05 Set A/D data flow result=40 10:39:05 Set A/D channel type result=40 10:39:05 Set A/D encoding result=40 10:39:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:05 Set channel filter=0.000000e+000 result=40 10:39:05 Config A/D Result=40 10:39:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:05 Get A/D filter: -9.255963e+061 result=40 10:39:05 Get A/D value=-858993460 result=40 10:39:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:05 Aux= 10:39:05 Message to Camera, serial 274230 queued 10:39:41 Received message from Master: op=PointingHead serial=274243 10:39:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:39:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:39:42 Point started: ret=0 10:39:42 point_skyscan result=0 10:39:43 Check angles 10:39:43 SkyScan query 10:39:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 10:39:43 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 10:39:43 Check angles 10:39:43 SkyScan query 10:39:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.325<-14955 Statuses=0008 0009 10:39:44 Msec=750 True Az=112.995 Ze=-44.325 Az status=0008 Ze status=0009 10:39:44 Check angles 10:39:44 SkyScan query 10:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.265<-16351 Statuses=0008 0009 10:39:45 Msec=1500 True Az=112.995 Ze=-65.265 Az status=0008 Ze status=0009 10:39:45 Check angles 10:39:45 SkyScan query 10:39:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 10:39:45 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 10:39:46 Check angles 10:39:46 SkyScan query 10:39:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.09<-19206 Statuses=0008 0009 10:39:46 Msec=3000 True Az=112.995 Ze=-108.09 Az status=0008 Ze status=0009 10:39:46 Check angles 10:39:46 SkyScan query 10:39:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 10:39:47 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 10:39:47 Check angles 10:39:47 SkyScan query 10:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.39<-22026 Statuses=0008 0009 10:39:48 Msec=4500 True Az=112.995 Ze=-150.39 Az status=0008 Ze status=0009 10:39:48 Check angles 10:39:48 SkyScan query 10:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 10:39:48 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 10:39:49 Check angles 10:39:49 SkyScan query 10:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:39:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:39:49 Message to Master queued w/err=0: serial=274243 error=0 10:39:54 Received message from Master: op=Filter serial=274244 10:39:54 Color wheel filter change from 0 to 0 10:39:54 FLIGetFilterPos err=0 currentPosition=0 10:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:54 Filter is already there-color wheel unchanged 10:39:54 Received message from Master: op=Shutter serial=274245 10:39:54 Shutter LASER open 10:39:55 Received message from Camera: op=State serial=274247 10:39:55 GetSingleValue result=40 Value=cccccccc 10:39:55 SkyScan query 10:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:55 Parameters OK 10:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:55 Set A/D data flow result=40 10:39:55 Set A/D channel type result=40 10:39:55 Set A/D encoding result=40 10:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:55 Set channel filter=0.000000e+000 result=40 10:39:55 Config A/D Result=40 10:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:55 Get A/D filter: -9.255963e+061 result=40 10:39:55 Get A/D value=-858993460 result=40 10:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:55 Parameters OK 10:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:55 Set A/D data flow result=40 10:39:55 Set A/D channel type result=40 10:39:55 Set A/D encoding result=40 10:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:55 Set channel filter=0.000000e+000 result=40 10:39:55 Config A/D Result=40 10:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:55 Get A/D filter: -9.255963e+061 result=40 10:39:55 Get A/D value=-858993460 result=40 10:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:55 Aux= 10:39:55 Message to Camera, serial 274247 queued 10:40:04 Received message from Master: op=Shutter serial=274257 10:40:04 Shutter LASER close 10:40:04 Received message from Master: op=PointingHead serial=274261 10:40:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:04 Point started: ret=0 10:40:04 point_skyscan result=0 10:40:05 Check angles 10:40:05 SkyScan query 10:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 10:40:06 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 10:40:06 Check angles 10:40:06 SkyScan query 10:40:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.41<-20094 Statuses=0008 0009 10:40:06 Msec=750 True Az=112.995 Ze=-121.41 Az status=0008 Ze status=0009 10:40:07 Check angles 10:40:07 SkyScan query 10:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.425<-18695 Statuses=0008 0009 10:40:07 Msec=1500 True Az=112.995 Ze=-100.425 Az status=0008 Ze status=0009 10:40:07 Check angles 10:40:07 SkyScan query 10:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 10:40:08 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 10:40:08 Check angles 10:40:08 SkyScan query 10:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 10:40:09 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 10:40:09 Check angles 10:40:09 SkyScan query 10:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.59<-14506 Statuses=0008 0009 10:40:09 Msec=3750 True Az=112.995 Ze=-37.59 Az status=0008 Ze status=0009 10:40:10 Check angles 10:40:10 SkyScan query 10:40:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 10:40:10 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 10:40:10 Check angles 10:40:10 SkyScan query 10:40:11 SkyScan query done: ret=0 az=113.01<-7534 ze=4.245<-11717 Statuses=0008 0009 10:40:11 Msec=5250 True Az=113.01 Ze=4.245 Az status=0008 Ze status=0009 10:40:11 Check angles 10:40:11 SkyScan query 10:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:40:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:40:12 Message to Master queued w/err=0: serial=274261 error=0 10:40:17 Received message from Master: op=Filter serial=274262 10:40:17 Color wheel filter change from 0 to 0 10:40:17 FLIGetFilterPos err=0 currentPosition=0 10:40:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:17 Filter is already there-color wheel unchanged 10:40:17 Received message from Master: op=Shutter serial=274263 10:40:17 Shutter LASER close 10:40:17 Received message from Camera: op=State serial=274265 10:40:17 GetSingleValue result=40 Value=cccccccc 10:40:17 SkyScan query 10:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:18 Parameters OK 10:40:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:18 Set A/D data flow result=40 10:40:18 Set A/D channel type result=40 10:40:18 Set A/D encoding result=40 10:40:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:18 Set channel filter=0.000000e+000 result=40 10:40:18 Config A/D Result=40 10:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:18 Get A/D filter: -9.255963e+061 result=40 10:40:18 Get A/D value=-858993460 result=40 10:40:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:18 Parameters OK 10:40:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:18 Set A/D data flow result=40 10:40:18 Set A/D channel type result=40 10:40:18 Set A/D encoding result=40 10:40:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:18 Set channel filter=0.000000e+000 result=40 10:40:18 Config A/D Result=40 10:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:18 Get A/D filter: -9.255963e+061 result=40 10:40:18 Get A/D value=-858993460 result=40 10:40:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:18 Aux= 10:40:18 Message to Camera, serial 274265 queued 10:40:54 Received message from Master: op=PointingHead serial=274278 10:40:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:40:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:40:55 Point started: ret=0 10:40:55 point_skyscan result=0 10:40:56 Check angles 10:40:56 SkyScan query 10:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:40:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:40:56 Message to Master queued w/err=0: serial=274278 error=0 10:41:01 Received message from Master: op=Filter serial=274279 10:41:01 Color wheel filter change from 0 to 0 10:41:01 FLIGetFilterPos err=0 currentPosition=0 10:41:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:01 Filter is already there-color wheel unchanged 10:41:01 Received message from Master: op=Shutter serial=274280 10:41:01 Shutter LASER close 10:41:01 Received message from Camera: op=State serial=274282 10:41:01 GetSingleValue result=40 Value=cccccccc 10:41:01 SkyScan query 10:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:02 Parameters OK 10:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:02 Set A/D data flow result=40 10:41:02 Set A/D channel type result=40 10:41:02 Set A/D encoding result=40 10:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:02 Set channel filter=0.000000e+000 result=40 10:41:02 Config A/D Result=40 10:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:02 Get A/D filter: -9.255963e+061 result=40 10:41:02 Get A/D value=-858993460 result=40 10:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:02 Parameters OK 10:41:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:02 Set A/D data flow result=40 10:41:02 Set A/D channel type result=40 10:41:02 Set A/D encoding result=40 10:41:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:02 Set channel filter=0.000000e+000 result=40 10:41:02 Config A/D Result=40 10:41:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:02 Get A/D filter: -9.255963e+061 result=40 10:41:02 Get A/D value=-858993460 result=40 10:41:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:02 Aux= 10:41:02 Message to Camera, serial 274282 queued 10:41:39 Received message from Master: op=PointingHead serial=274295 10:41:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:41:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:41:39 Point started: ret=0 10:41:39 point_skyscan result=0 10:41:40 Check angles 10:41:40 SkyScan query 10:41:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:41:40 Message to Master queued w/err=0: serial=274295 error=0 10:41:45 Received message from Master: op=Filter serial=274296 10:41:45 Color wheel filter change from 0 to 0 10:41:45 FLIGetFilterPos err=0 currentPosition=0 10:41:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:45 Filter is already there-color wheel unchanged 10:41:46 Received message from Master: op=Shutter serial=274297 10:41:46 Shutter LASER close 10:41:46 Received message from Camera: op=State serial=274299 10:41:46 GetSingleValue result=40 Value=cccccccc 10:41:46 SkyScan query 10:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:41:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:46 Parameters OK 10:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:46 Set A/D data flow result=40 10:41:46 Set A/D channel type result=40 10:41:46 Set A/D encoding result=40 10:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:46 Set channel filter=0.000000e+000 result=40 10:41:46 Config A/D Result=40 10:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:46 Get A/D filter: -9.255963e+061 result=40 10:41:46 Get A/D value=-858993460 result=40 10:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:46 Parameters OK 10:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:46 Set A/D data flow result=40 10:41:46 Set A/D channel type result=40 10:41:46 Set A/D encoding result=40 10:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:46 Set channel filter=0.000000e+000 result=40 10:41:46 Config A/D Result=40 10:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:46 Get A/D filter: -9.255963e+061 result=40 10:41:46 Get A/D value=-858993460 result=40 10:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:46 Aux= 10:41:46 Message to Camera, serial 274299 queued 10:42:22 Received message from Master: op=PointingHead serial=274311 10:42:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:42:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:42:22 Point started: ret=0 10:42:22 point_skyscan result=0 10:42:23 Check angles 10:42:23 SkyScan query 10:42:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:42:24 Message to Master queued w/err=0: serial=274311 error=0 10:42:29 Received message from Master: op=Filter serial=274312 10:42:29 Color wheel filter change from 0 to 0 10:42:29 FLIGetFilterPos err=0 currentPosition=0 10:42:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:29 Filter is already there-color wheel unchanged 10:42:29 Received message from Master: op=Shutter serial=274313 10:42:29 Shutter LASER close 10:42:29 Received message from Camera: op=State serial=274315 10:42:29 GetSingleValue result=40 Value=cccccccc 10:42:29 SkyScan query 10:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:42:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:30 Parameters OK 10:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:30 Set A/D data flow result=40 10:42:30 Set A/D channel type result=40 10:42:30 Set A/D encoding result=40 10:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:30 Set channel filter=0.000000e+000 result=40 10:42:30 Config A/D Result=40 10:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:30 Get A/D filter: -9.255963e+061 result=40 10:42:30 Get A/D value=-858993460 result=40 10:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:30 Parameters OK 10:42:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:30 Set A/D data flow result=40 10:42:30 Set A/D channel type result=40 10:42:30 Set A/D encoding result=40 10:42:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:30 Set channel filter=0.000000e+000 result=40 10:42:30 Config A/D Result=40 10:42:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:30 Get A/D filter: -9.255963e+061 result=40 10:42:30 Get A/D value=-858993460 result=40 10:42:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:30 Aux= 10:42:30 Message to Camera, serial 274315 queued 10:43:06 Received message from Master: op=PointingHead serial=274328 10:43:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:43:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:43:07 Point started: ret=0 10:43:07 point_skyscan result=0 10:43:08 Check angles 10:43:08 SkyScan query 10:43:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.28<-13552 Statuses=0008 0009 10:43:08 Msec=0 True Az=112.995 Ze=-23.28 Az status=0008 Ze status=0009 10:43:08 Check angles 10:43:08 SkyScan query 10:43:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 10:43:09 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 10:43:09 Check angles 10:43:09 SkyScan query 10:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 10:43:10 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 10:43:10 Check angles 10:43:10 SkyScan query 10:43:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 10:43:10 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 10:43:11 Check angles 10:43:11 SkyScan query 10:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 10:43:11 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 10:43:11 Check angles 10:43:11 SkyScan query 10:43:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 10:43:12 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 10:43:12 Check angles 10:43:12 SkyScan query 10:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 10:43:13 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 10:43:13 Check angles 10:43:13 SkyScan query 10:43:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.4<-23360 Statuses=0008 0009 10:43:13 Msec=5250 True Az=112.995 Ze=-170.4 Az status=0008 Ze status=0009 10:43:14 Check angles 10:43:14 SkyScan query 10:43:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:43:14 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:43:14 Message to Master queued w/err=0: serial=274328 error=0 10:43:19 Received message from Master: op=Filter serial=274329 10:43:19 Color wheel filter change from 0 to 0 10:43:19 FLIGetFilterPos err=0 currentPosition=0 10:43:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:19 Filter is already there-color wheel unchanged 10:43:19 Received message from Master: op=Shutter serial=274330 10:43:19 Shutter LASER open 10:43:19 Received message from Camera: op=State serial=274332 10:43:19 GetSingleValue result=40 Value=cccccccc 10:43:19 SkyScan query 10:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:43:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:20 Parameters OK 10:43:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:20 Set A/D data flow result=40 10:43:20 Set A/D channel type result=40 10:43:20 Set A/D encoding result=40 10:43:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:20 Set channel filter=0.000000e+000 result=40 10:43:20 Config A/D Result=40 10:43:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:20 Get A/D filter: -9.255963e+061 result=40 10:43:20 Get A/D value=-858993460 result=40 10:43:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:20 Parameters OK 10:43:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:20 Set A/D data flow result=40 10:43:20 Set A/D channel type result=40 10:43:20 Set A/D encoding result=40 10:43:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:20 Set channel filter=0.000000e+000 result=40 10:43:20 Config A/D Result=40 10:43:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:20 Get A/D filter: -9.255963e+061 result=40 10:43:20 Get A/D value=-858993460 result=40 10:43:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:20 Aux= 10:43:20 Message to Camera, serial 274332 queued 10:43:28 Received message from Master: op=Shutter serial=274342 10:43:28 Shutter LASER close 10:43:29 Received message from Master: op=PointingHead serial=274346 10:43:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:43:29 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:43:29 Point started: ret=0 10:43:29 point_skyscan result=0 10:43:30 Check angles 10:43:30 SkyScan query 10:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 10:43:31 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 10:43:31 Check angles 10:43:31 SkyScan query 10:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 10:43:32 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 10:43:32 Check angles 10:43:32 SkyScan query 10:43:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 10:43:32 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 10:43:33 Check angles 10:43:33 SkyScan query 10:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.44<-17296 Statuses=0008 0009 10:43:33 Msec=2250 True Az=112.995 Ze=-79.44 Az status=0008 Ze status=0009 10:43:33 Check angles 10:43:33 SkyScan query 10:43:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 10:43:34 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 10:43:34 Check angles 10:43:34 SkyScan query 10:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.545<-14503 Statuses=0008 0009 10:43:35 Msec=3750 True Az=112.995 Ze=-37.545 Az status=0008 Ze status=0009 10:43:35 Check angles 10:43:35 SkyScan query 10:43:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.575<-13105 Statuses=0008 0009 10:43:35 Msec=4500 True Az=112.995 Ze=-16.575 Az status=0008 Ze status=0009 10:43:36 Check angles 10:43:36 SkyScan query 10:43:36 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 10:43:36 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 10:43:36 Check angles 10:43:36 SkyScan query 10:43:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:43:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:43:37 Message to Master queued w/err=0: serial=274346 error=0 10:43:42 Received message from Master: op=Filter serial=274347 10:43:42 Color wheel filter change from 0 to 0 10:43:42 FLIGetFilterPos err=0 currentPosition=0 10:43:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:42 Filter is already there-color wheel unchanged 10:43:42 Received message from Master: op=Shutter serial=274348 10:43:42 Shutter LASER close 10:43:42 Received message from Camera: op=State serial=274350 10:43:42 GetSingleValue result=40 Value=cccccccc 10:43:42 SkyScan query 10:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:43:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:43 Parameters OK 10:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:43 Set A/D data flow result=40 10:43:43 Set A/D channel type result=40 10:43:43 Set A/D encoding result=40 10:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:43 Set channel filter=0.000000e+000 result=40 10:43:43 Config A/D Result=40 10:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:43 Get A/D filter: -9.255963e+061 result=40 10:43:43 Get A/D value=-858993460 result=40 10:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:43 Parameters OK 10:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:43 Set A/D data flow result=40 10:43:43 Set A/D channel type result=40 10:43:43 Set A/D encoding result=40 10:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:43 Set channel filter=0.000000e+000 result=40 10:43:43 Config A/D Result=40 10:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:43 Get A/D filter: -9.255963e+061 result=40 10:43:43 Get A/D value=-858993460 result=40 10:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:43 Aux= 10:43:43 Message to Camera, serial 274350 queued [UTC 2019-3-14 10:43:48] 10:44:20 Received message from Master: op=PointingHead serial=274363 10:44:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:44:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:44:20 Point started: ret=0 10:44:20 point_skyscan result=0 10:44:21 Check angles 10:44:21 SkyScan query 10:44:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:44:21 Message to Master queued w/err=0: serial=274363 error=0 10:44:26 Received message from Master: op=Filter serial=274364 10:44:26 Color wheel filter change from 0 to 0 10:44:26 FLIGetFilterPos err=0 currentPosition=0 10:44:26 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:26 Filter is already there-color wheel unchanged 10:44:26 Received message from Master: op=Shutter serial=274365 10:44:26 Shutter LASER close 10:44:26 Received message from Camera: op=State serial=274367 10:44:26 GetSingleValue result=40 Value=cccccccc 10:44:26 SkyScan query 10:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:44:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:27 Parameters OK 10:44:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:27 Set A/D data flow result=40 10:44:27 Set A/D channel type result=40 10:44:27 Set A/D encoding result=40 10:44:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:27 Set channel filter=0.000000e+000 result=40 10:44:27 Config A/D Result=40 10:44:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:27 Get A/D filter: -9.255963e+061 result=40 10:44:27 Get A/D value=-858993460 result=40 10:44:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:27 Parameters OK 10:44:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:27 Set A/D data flow result=40 10:44:27 Set A/D channel type result=40 10:44:27 Set A/D encoding result=40 10:44:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:27 Set channel filter=0.000000e+000 result=40 10:44:27 Config A/D Result=40 10:44:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:27 Get A/D filter: -9.255963e+061 result=40 10:44:27 Get A/D value=-858993460 result=40 10:44:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:27 Aux= 10:44:27 Message to Camera, serial 274367 queued 10:45:04 Received message from Master: op=PointingHead serial=274380 10:45:04 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:45:04 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:45:04 Point started: ret=0 10:45:04 point_skyscan result=0 10:45:05 Check angles 10:45:05 SkyScan query 10:45:06 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 10:45:06 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 10:45:06 Check angles 10:45:06 SkyScan query 10:45:06 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 10:45:06 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 10:45:06 Check angles 10:45:06 SkyScan query 10:45:07 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 10:45:07 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 10:45:07 Check angles 10:45:07 SkyScan query 10:45:08 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:45:08 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:45:08 Message to Master queued w/err=0: serial=274380 error=0 10:45:13 Received message from Master: op=Filter serial=274381 10:45:13 Color wheel filter change from 0 to 0 10:45:13 FLIGetFilterPos err=0 currentPosition=0 10:45:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:13 Filter is already there-color wheel unchanged 10:45:13 Received message from Master: op=Shutter serial=274382 10:45:13 Shutter LASER close 10:45:13 Received message from Camera: op=State serial=274384 10:45:13 GetSingleValue result=40 Value=cccccccc 10:45:13 SkyScan query 10:45:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:14 Parameters OK 10:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:14 Set A/D data flow result=40 10:45:14 Set A/D channel type result=40 10:45:14 Set A/D encoding result=40 10:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:14 Set channel filter=0.000000e+000 result=40 10:45:14 Config A/D Result=40 10:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:14 Get A/D filter: -9.255963e+061 result=40 10:45:14 Get A/D value=-858993460 result=40 10:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:14 Parameters OK 10:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:14 Set A/D data flow result=40 10:45:14 Set A/D channel type result=40 10:45:14 Set A/D encoding result=40 10:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:14 Set channel filter=0.000000e+000 result=40 10:45:14 Config A/D Result=40 10:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:14 Get A/D filter: -9.255963e+061 result=40 10:45:14 Get A/D value=-858993460 result=40 10:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:14 Aux= 10:45:14 Message to Camera, serial 274384 queued 10:45:50 Received message from Master: op=PointingHead serial=274397 10:45:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:45:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:45:51 Point started: ret=0 10:45:51 point_skyscan result=0 10:45:52 Check angles 10:45:52 SkyScan query 10:45:52 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 10:45:52 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 10:45:52 Check angles 10:45:52 SkyScan query 10:45:53 SkyScan query done: ret=0 az=135.48<-9032 ze=6.495<-11567 Statuses=0009 0008 10:45:53 Msec=750 True Az=135.48 Ze=6.495 Az status=0009 Ze status=0008 10:45:53 Check angles 10:45:53 SkyScan query 10:45:54 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 10:45:54 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 10:45:54 Check angles 10:45:54 SkyScan query 10:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:45:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:45:54 Message to Master queued w/err=0: serial=274397 error=0 10:45:59 Received message from Master: op=Filter serial=274398 10:45:59 Color wheel filter change from 0 to 0 10:45:59 FLIGetFilterPos err=0 currentPosition=0 10:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:59 Filter is already there-color wheel unchanged 10:46:00 Received message from Master: op=Shutter serial=274399 10:46:00 Shutter LASER close 10:46:00 Received message from Camera: op=State serial=274401 10:46:00 GetSingleValue result=40 Value=cccccccc 10:46:00 SkyScan query 10:46:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:00 Parameters OK 10:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:00 Set A/D data flow result=40 10:46:00 Set A/D channel type result=40 10:46:00 Set A/D encoding result=40 10:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:00 Set channel filter=0.000000e+000 result=40 10:46:00 Config A/D Result=40 10:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:00 Get A/D filter: -9.255963e+061 result=40 10:46:00 Get A/D value=-858993460 result=40 10:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:00 Parameters OK 10:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:00 Set A/D data flow result=40 10:46:00 Set A/D channel type result=40 10:46:00 Set A/D encoding result=40 10:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:00 Set channel filter=0.000000e+000 result=40 10:46:00 Config A/D Result=40 10:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:00 Get A/D filter: -9.255963e+061 result=40 10:46:00 Get A/D value=-858993460 result=40 10:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:00 Aux= 10:46:00 Message to Camera, serial 274401 queued 10:46:37 Received message from Master: op=PointingHead serial=274414 10:46:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:46:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:46:37 Point started: ret=0 10:46:37 point_skyscan result=0 10:46:38 Check angles 10:46:38 SkyScan query 10:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.4<-13560 Statuses=0008 0009 10:46:39 Msec=0 True Az=112.995 Ze=-23.4 Az status=0008 Ze status=0009 10:46:39 Check angles 10:46:39 SkyScan query 10:46:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 10:46:39 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 10:46:40 Check angles 10:46:40 SkyScan query 10:46:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 10:46:40 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 10:46:40 Check angles 10:46:40 SkyScan query 10:46:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.25<-17750 Statuses=0008 0009 10:46:41 Msec=2250 True Az=112.995 Ze=-86.25 Az status=0008 Ze status=0009 10:46:41 Check angles 10:46:41 SkyScan query 10:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.205<-19147 Statuses=0008 0009 10:46:42 Msec=3000 True Az=112.995 Ze=-107.205 Az status=0008 Ze status=0009 10:46:42 Check angles 10:46:42 SkyScan query 10:46:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.595<-20573 Statuses=0008 0009 10:46:42 Msec=3750 True Az=112.995 Ze=-128.595 Az status=0008 Ze status=0009 10:46:43 Check angles 10:46:43 SkyScan query 10:46:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.595<-21973 Statuses=0008 0009 10:46:43 Msec=4500 True Az=112.995 Ze=-149.595 Az status=0008 Ze status=0009 10:46:43 Check angles 10:46:43 SkyScan query 10:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 10:46:44 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 10:46:44 Check angles 10:46:44 SkyScan query 10:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:46:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:46:45 Message to Master queued w/err=0: serial=274414 error=0 10:46:50 Received message from Master: op=Filter serial=274415 10:46:50 Color wheel filter change from 0 to 0 10:46:50 FLIGetFilterPos err=0 currentPosition=0 10:46:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:50 Filter is already there-color wheel unchanged 10:46:50 Received message from Master: op=Shutter serial=274416 10:46:50 Shutter LASER open 10:46:50 Received message from Camera: op=State serial=274418 10:46:50 GetSingleValue result=40 Value=cccccccc 10:46:50 SkyScan query 10:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:46:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:51 Parameters OK 10:46:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:51 Set A/D data flow result=40 10:46:51 Set A/D channel type result=40 10:46:51 Set A/D encoding result=40 10:46:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:51 Set channel filter=0.000000e+000 result=40 10:46:51 Config A/D Result=40 10:46:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:51 Get A/D filter: -9.255963e+061 result=40 10:46:51 Get A/D value=-858993460 result=40 10:46:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:51 Parameters OK 10:46:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:51 Set A/D data flow result=40 10:46:51 Set A/D channel type result=40 10:46:51 Set A/D encoding result=40 10:46:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:51 Set channel filter=0.000000e+000 result=40 10:46:51 Config A/D Result=40 10:46:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:51 Get A/D filter: -9.255963e+061 result=40 10:46:51 Get A/D value=-858993460 result=40 10:46:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:51 Aux= 10:46:51 Message to Camera, serial 274418 queued 10:46:59 Received message from Master: op=Shutter serial=274428 10:46:59 Shutter LASER close 10:47:00 Received message from Master: op=PointingHead serial=274432 10:47:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:00 Point started: ret=0 10:47:00 point_skyscan result=0 10:47:01 Check angles 10:47:01 SkyScan query 10:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 10:47:01 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 10:47:01 Check angles 10:47:01 SkyScan query 10:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 10:47:02 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 10:47:02 Check angles 10:47:02 SkyScan query 10:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 10:47:03 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 10:47:03 Check angles 10:47:03 SkyScan query 10:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 10:47:03 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 10:47:04 Check angles 10:47:04 SkyScan query 10:47:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.17<-15878 Statuses=0008 0009 10:47:04 Msec=3000 True Az=112.995 Ze=-58.17 Az status=0008 Ze status=0009 10:47:04 Check angles 10:47:04 SkyScan query 10:47:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.275<-14485 Statuses=0008 0009 10:47:05 Msec=3750 True Az=112.995 Ze=-37.275 Az status=0008 Ze status=0009 10:47:05 Check angles 10:47:05 SkyScan query 10:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.87<-13058 Statuses=0008 0009 10:47:06 Msec=4500 True Az=112.995 Ze=-15.87 Az status=0008 Ze status=0009 10:47:06 Check angles 10:47:06 SkyScan query 10:47:06 SkyScan query done: ret=0 az=112.995<-7533 ze=5.175<-11655 Statuses=0008 0009 10:47:06 Msec=5250 True Az=112.995 Ze=5.175 Az status=0008 Ze status=0009 10:47:07 Check angles 10:47:07 SkyScan query 10:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:47:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:47:07 Message to Master queued w/err=0: serial=274432 error=0 10:47:12 Received message from Master: op=Filter serial=274433 10:47:12 Color wheel filter change from 0 to 0 10:47:12 FLIGetFilterPos err=0 currentPosition=0 10:47:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:12 Filter is already there-color wheel unchanged 10:47:12 Received message from Master: op=Shutter serial=274434 10:47:12 Shutter LASER close 10:47:13 Received message from Camera: op=State serial=274436 10:47:13 GetSingleValue result=40 Value=cccccccc 10:47:13 SkyScan query 10:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:13 Parameters OK 10:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:13 Set A/D data flow result=40 10:47:13 Set A/D channel type result=40 10:47:13 Set A/D encoding result=40 10:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:13 Set channel filter=0.000000e+000 result=40 10:47:13 Config A/D Result=40 10:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:13 Get A/D filter: -9.255963e+061 result=40 10:47:13 Get A/D value=-858993460 result=40 10:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:13 Parameters OK 10:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:13 Set A/D data flow result=40 10:47:13 Set A/D channel type result=40 10:47:13 Set A/D encoding result=40 10:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:13 Set channel filter=0.000000e+000 result=40 10:47:13 Config A/D Result=40 10:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:13 Get A/D filter: -9.255963e+061 result=40 10:47:13 Get A/D value=-858993460 result=40 10:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:13 Aux= 10:47:13 Message to Camera, serial 274436 queued 10:47:50 Received message from Master: op=PointingHead serial=274449 10:47:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:47:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:47:50 Point started: ret=0 10:47:50 point_skyscan result=0 10:47:51 Check angles 10:47:51 SkyScan query 10:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:47:52 Message to Master queued w/err=0: serial=274449 error=0 10:47:57 Received message from Master: op=Filter serial=274450 10:47:57 Color wheel filter change from 0 to 0 10:47:57 FLIGetFilterPos err=0 currentPosition=0 10:47:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:57 Filter is already there-color wheel unchanged 10:47:57 Received message from Master: op=Shutter serial=274451 10:47:57 Shutter LASER close 10:47:57 Received message from Camera: op=State serial=274453 10:47:57 GetSingleValue result=40 Value=cccccccc 10:47:57 SkyScan query 10:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:57 Parameters OK 10:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:57 Set A/D data flow result=40 10:47:57 Set A/D channel type result=40 10:47:57 Set A/D encoding result=40 10:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:57 Set channel filter=0.000000e+000 result=40 10:47:57 Config A/D Result=40 10:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:57 Get A/D filter: -9.255963e+061 result=40 10:47:57 Get A/D value=-858993460 result=40 10:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:57 Parameters OK 10:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:57 Set A/D data flow result=40 10:47:57 Set A/D channel type result=40 10:47:57 Set A/D encoding result=40 10:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:57 Set channel filter=0.000000e+000 result=40 10:47:57 Config A/D Result=40 10:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:57 Get A/D filter: -9.255963e+061 result=40 10:47:57 Get A/D value=-858993460 result=40 10:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:57 Aux= 10:47:57 Message to Camera, serial 274453 queued 10:48:33 Received message from Master: op=PointingHead serial=274465 10:48:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:48:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:48:34 Point started: ret=0 10:48:34 point_skyscan result=0 10:48:34 Check angles 10:48:34 SkyScan query 10:48:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:48:35 Message to Master queued w/err=0: serial=274465 error=0 10:48:40 Received message from Master: op=Filter serial=274466 10:48:40 Color wheel filter change from 0 to 0 10:48:40 FLIGetFilterPos err=0 currentPosition=0 10:48:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:40 Filter is already there-color wheel unchanged 10:48:40 Received message from Master: op=Shutter serial=274467 10:48:40 Shutter LASER close 10:48:40 Received message from Camera: op=State serial=274469 10:48:40 GetSingleValue result=40 Value=cccccccc 10:48:40 SkyScan query 10:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:48:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:41 Parameters OK 10:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:41 Set A/D data flow result=40 10:48:41 Set A/D channel type result=40 10:48:41 Set A/D encoding result=40 10:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:41 Set channel filter=0.000000e+000 result=40 10:48:41 Config A/D Result=40 10:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:41 Get A/D filter: -9.255963e+061 result=40 10:48:41 Get A/D value=-858993460 result=40 10:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:41 Parameters OK 10:48:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:41 Set A/D data flow result=40 10:48:41 Set A/D channel type result=40 10:48:41 Set A/D encoding result=40 10:48:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:41 Set channel filter=0.000000e+000 result=40 10:48:41 Config A/D Result=40 10:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:41 Get A/D filter: -9.255963e+061 result=40 10:48:41 Get A/D value=-858993460 result=40 10:48:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:41 Aux= 10:48:41 Message to Camera, serial 274469 queued 10:49:18 Received message from Master: op=PointingHead serial=274482 10:49:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:49:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:49:18 Point started: ret=0 10:49:18 point_skyscan result=0 10:49:19 Check angles 10:49:19 SkyScan query 10:49:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:49:19 Message to Master queued w/err=0: serial=274482 error=0 10:49:24 Received message from Master: op=Filter serial=274483 10:49:24 Color wheel filter change from 0 to 0 10:49:24 FLIGetFilterPos err=0 currentPosition=0 10:49:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:24 Filter is already there-color wheel unchanged 10:49:24 Received message from Master: op=Shutter serial=274484 10:49:24 Shutter LASER close 10:49:25 Received message from Camera: op=State serial=274486 10:49:25 GetSingleValue result=40 Value=cccccccc 10:49:25 SkyScan query 10:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:49:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:25 Parameters OK 10:49:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:25 Set A/D data flow result=40 10:49:25 Set A/D channel type result=40 10:49:25 Set A/D encoding result=40 10:49:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:25 Set channel filter=0.000000e+000 result=40 10:49:25 Config A/D Result=40 10:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:25 Get A/D filter: -9.255963e+061 result=40 10:49:25 Get A/D value=-858993460 result=40 10:49:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:25 Parameters OK 10:49:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:25 Set A/D data flow result=40 10:49:25 Set A/D channel type result=40 10:49:25 Set A/D encoding result=40 10:49:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:25 Set channel filter=0.000000e+000 result=40 10:49:25 Config A/D Result=40 10:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:25 Get A/D filter: -9.255963e+061 result=40 10:49:25 Get A/D value=-858993460 result=40 10:49:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:25 Aux= 10:49:25 Message to Camera, serial 274486 queued 10:50:02 Received message from Master: op=PointingHead serial=274499 10:50:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:50:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:50:02 Point started: ret=0 10:50:02 point_skyscan result=0 10:50:03 Check angles 10:50:03 SkyScan query 10:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 10:50:04 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 10:50:04 Check angles 10:50:04 SkyScan query 10:50:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 10:50:04 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 10:50:05 Check angles 10:50:05 SkyScan query 10:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 10:50:05 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 10:50:05 Check angles 10:50:05 SkyScan query 10:50:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.28<-17752 Statuses=0008 0009 10:50:06 Msec=2250 True Az=112.995 Ze=-86.28 Az status=0008 Ze status=0009 10:50:06 Check angles 10:50:06 SkyScan query 10:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 10:50:07 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 10:50:07 Check angles 10:50:07 SkyScan query 10:50:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.19<-20546 Statuses=0008 0009 10:50:07 Msec=3750 True Az=112.995 Ze=-128.19 Az status=0008 Ze status=0009 10:50:08 Check angles 10:50:08 SkyScan query 10:50:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 10:50:08 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 10:50:08 Check angles 10:50:08 SkyScan query 10:50:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 10:50:09 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 10:50:09 Check angles 10:50:09 SkyScan query 10:50:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:50:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:50:10 Message to Master queued w/err=0: serial=274499 error=0 10:50:15 Received message from Master: op=Filter serial=274500 10:50:15 Color wheel filter change from 0 to 0 10:50:15 FLIGetFilterPos err=0 currentPosition=0 10:50:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:15 Filter is already there-color wheel unchanged 10:50:15 Received message from Master: op=Shutter serial=274501 10:50:15 Shutter LASER open 10:50:15 Received message from Camera: op=State serial=274503 10:50:15 GetSingleValue result=40 Value=cccccccc 10:50:15 SkyScan query 10:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:50:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:16 Parameters OK 10:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:16 Set A/D data flow result=40 10:50:16 Set A/D channel type result=40 10:50:16 Set A/D encoding result=40 10:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:16 Set channel filter=0.000000e+000 result=40 10:50:16 Config A/D Result=40 10:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:16 Get A/D filter: -9.255963e+061 result=40 10:50:16 Get A/D value=-858993460 result=40 10:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:16 Parameters OK 10:50:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:16 Set A/D data flow result=40 10:50:16 Set A/D channel type result=40 10:50:16 Set A/D encoding result=40 10:50:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:16 Set channel filter=0.000000e+000 result=40 10:50:16 Config A/D Result=40 10:50:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:16 Get A/D filter: -9.255963e+061 result=40 10:50:16 Get A/D value=-858993460 result=40 10:50:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:16 Aux= 10:50:16 Message to Camera, serial 274503 queued 10:50:24 Received message from Master: op=Shutter serial=274513 10:50:24 Shutter LASER close 10:50:25 Received message from Master: op=PointingHead serial=274517 10:50:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:50:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:50:25 Point started: ret=0 10:50:25 point_skyscan result=0 10:50:26 Check angles 10:50:26 SkyScan query 10:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 10:50:26 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 10:50:26 Check angles 10:50:26 SkyScan query 10:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 10:50:27 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 10:50:27 Check angles 10:50:27 SkyScan query 10:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.35<-18690 Statuses=0008 0009 10:50:28 Msec=1500 True Az=112.995 Ze=-100.35 Az status=0008 Ze status=0009 10:50:28 Check angles 10:50:28 SkyScan query 10:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 10:50:28 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 10:50:29 Check angles 10:50:29 SkyScan query 10:50:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.425<-15895 Statuses=0008 0009 10:50:29 Msec=3000 True Az=112.995 Ze=-58.425 Az status=0008 Ze status=0009 10:50:29 Check angles 10:50:29 SkyScan query 10:50:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.515<-14501 Statuses=0008 0009 10:50:30 Msec=3750 True Az=112.995 Ze=-37.515 Az status=0008 Ze status=0009 10:50:30 Check angles 10:50:30 SkyScan query 10:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.53<-13102 Statuses=0008 0009 10:50:31 Msec=4500 True Az=112.995 Ze=-16.53 Az status=0008 Ze status=0009 10:50:31 Check angles 10:50:31 SkyScan query 10:50:31 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 10:50:31 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 10:50:32 Check angles 10:50:32 SkyScan query 10:50:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:50:32 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:50:32 Message to Master queued w/err=0: serial=274517 error=0 10:50:37 Received message from Master: op=Filter serial=274518 10:50:37 Color wheel filter change from 0 to 0 10:50:37 FLIGetFilterPos err=0 currentPosition=0 10:50:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:37 Filter is already there-color wheel unchanged 10:50:37 Received message from Master: op=Shutter serial=274519 10:50:37 Shutter LASER close 10:50:38 Received message from Camera: op=State serial=274521 10:50:38 GetSingleValue result=40 Value=cccccccc 10:50:38 SkyScan query 10:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:50:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:38 Parameters OK 10:50:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:38 Set A/D data flow result=40 10:50:38 Set A/D channel type result=40 10:50:38 Set A/D encoding result=40 10:50:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:38 Set channel filter=0.000000e+000 result=40 10:50:38 Config A/D Result=40 10:50:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:38 Get A/D filter: -9.255963e+061 result=40 10:50:38 Get A/D value=-858993460 result=40 10:50:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:38 Parameters OK 10:50:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:38 Set A/D data flow result=40 10:50:38 Set A/D channel type result=40 10:50:38 Set A/D encoding result=40 10:50:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:38 Set channel filter=0.000000e+000 result=40 10:50:38 Config A/D Result=40 10:50:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:38 Get A/D filter: -9.255963e+061 result=40 10:50:38 Get A/D value=-858993460 result=40 10:50:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:38 Aux= 10:50:38 Message to Camera, serial 274521 queued 10:51:15 Received message from Master: op=PointingHead serial=274534 10:51:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:51:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:51:15 Point started: ret=0 10:51:15 point_skyscan result=0 10:51:16 Check angles 10:51:16 SkyScan query 10:51:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:51:17 Message to Master queued w/err=0: serial=274534 error=0 10:51:22 Received message from Master: op=Filter serial=274535 10:51:22 Color wheel filter change from 0 to 0 10:51:22 FLIGetFilterPos err=0 currentPosition=0 10:51:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:22 Filter is already there-color wheel unchanged 10:51:22 Received message from Master: op=Shutter serial=274536 10:51:22 Shutter LASER close 10:51:22 Received message from Camera: op=State serial=274538 10:51:22 GetSingleValue result=40 Value=cccccccc 10:51:22 SkyScan query 10:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:51:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:22 Parameters OK 10:51:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:22 Set A/D data flow result=40 10:51:22 Set A/D channel type result=40 10:51:22 Set A/D encoding result=40 10:51:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:22 Set channel filter=0.000000e+000 result=40 10:51:22 Config A/D Result=40 10:51:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:22 Get A/D filter: -9.255963e+061 result=40 10:51:22 Get A/D value=-858993460 result=40 10:51:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:22 Parameters OK 10:51:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:22 Set A/D data flow result=40 10:51:22 Set A/D channel type result=40 10:51:22 Set A/D encoding result=40 10:51:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:22 Set channel filter=0.000000e+000 result=40 10:51:22 Config A/D Result=40 10:51:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:22 Get A/D filter: -9.255963e+061 result=40 10:51:22 Get A/D value=-858993460 result=40 10:51:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:22 Aux= 10:51:22 Message to Camera, serial 274538 queued 10:51:59 Received message from Master: op=PointingHead serial=274551 10:51:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:51:59 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:52:00 Point started: ret=0 10:52:00 point_skyscan result=0 10:52:00 Check angles 10:52:00 SkyScan query 10:52:01 SkyScan query done: ret=0 az=136.17<-9078 ze=-6.51<-12434 Statuses=0009 0008 10:52:01 Msec=0 True Az=136.17 Ze=-6.51 Az status=0009 Ze status=0008 10:52:01 Check angles 10:52:01 SkyScan query 10:52:02 SkyScan query done: ret=0 az=153.99<-10266 ze=-6.495<-12433 Statuses=0009 0008 10:52:02 Msec=750 True Az=153.99 Ze=-6.495 Az status=0009 Ze status=0008 10:52:02 Check angles 10:52:02 SkyScan query 10:52:02 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 10:52:02 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 10:52:03 Check angles 10:52:03 SkyScan query 10:52:03 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:52:03 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:52:03 Message to Master queued w/err=0: serial=274551 error=0 10:52:08 Received message from Master: op=Filter serial=274552 10:52:08 Color wheel filter change from 0 to 0 10:52:08 FLIGetFilterPos err=0 currentPosition=0 10:52:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:08 Filter is already there-color wheel unchanged 10:52:08 Received message from Master: op=Shutter serial=274553 10:52:08 Shutter LASER close 10:52:08 Received message from Camera: op=State serial=274555 10:52:08 GetSingleValue result=40 Value=cccccccc 10:52:08 SkyScan query 10:52:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:52:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:09 Parameters OK 10:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:09 Set A/D data flow result=40 10:52:09 Set A/D channel type result=40 10:52:09 Set A/D encoding result=40 10:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:09 Set channel filter=0.000000e+000 result=40 10:52:09 Config A/D Result=40 10:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:09 Get A/D filter: -9.255963e+061 result=40 10:52:09 Get A/D value=-858993460 result=40 10:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:09 Parameters OK 10:52:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:09 Set A/D data flow result=40 10:52:09 Set A/D channel type result=40 10:52:09 Set A/D encoding result=40 10:52:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:09 Set channel filter=0.000000e+000 result=40 10:52:09 Config A/D Result=40 10:52:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:09 Get A/D filter: -9.255963e+061 result=40 10:52:09 Get A/D value=-858993460 result=40 10:52:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:09 Aux= 10:52:09 Message to Camera, serial 274555 queued 10:52:46 Received message from Master: op=PointingHead serial=274568 10:52:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:52:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:52:46 Point started: ret=0 10:52:46 point_skyscan result=0 10:52:47 Check angles 10:52:47 SkyScan query 10:52:48 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 10:52:48 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 10:52:48 Check angles 10:52:48 SkyScan query 10:52:48 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 10:52:48 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 10:52:48 Check angles 10:52:48 SkyScan query 10:52:49 SkyScan query done: ret=0 az=117.525<-7835 ze=6.495<-11567 Statuses=0009 0008 10:52:49 Msec=1500 True Az=117.525 Ze=6.495 Az status=0009 Ze status=0008 10:52:49 Check angles 10:52:49 SkyScan query 10:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:52:50 Message to Master queued w/err=0: serial=274568 error=0 10:52:55 Received message from Master: op=Filter serial=274569 10:52:55 Color wheel filter change from 0 to 0 10:52:55 FLIGetFilterPos err=0 currentPosition=0 10:52:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:55 Filter is already there-color wheel unchanged 10:52:55 Received message from Master: op=Shutter serial=274570 10:52:55 Shutter LASER close 10:52:55 Received message from Camera: op=State serial=274572 10:52:55 GetSingleValue result=40 Value=cccccccc 10:52:55 SkyScan query 10:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:52:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:56 Parameters OK 10:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:56 Set A/D data flow result=40 10:52:56 Set A/D channel type result=40 10:52:56 Set A/D encoding result=40 10:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:56 Set channel filter=0.000000e+000 result=40 10:52:56 Config A/D Result=40 10:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:56 Get A/D filter: -9.255963e+061 result=40 10:52:56 Get A/D value=-858993460 result=40 10:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:56 Parameters OK 10:52:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:56 Set A/D data flow result=40 10:52:56 Set A/D channel type result=40 10:52:56 Set A/D encoding result=40 10:52:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:56 Set channel filter=0.000000e+000 result=40 10:52:56 Config A/D Result=40 10:52:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:56 Get A/D filter: -9.255963e+061 result=40 10:52:56 Get A/D value=-858993460 result=40 10:52:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:56 Aux= 10:52:56 Message to Camera, serial 274572 queued 10:53:33 Received message from Master: op=PointingHead serial=274585 10:53:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:53:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:53:33 Point started: ret=0 10:53:33 point_skyscan result=0 10:53:34 Check angles 10:53:34 SkyScan query 10:53:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.58<-13572 Statuses=0008 0009 10:53:34 Msec=0 True Az=112.995 Ze=-23.58 Az status=0008 Ze status=0009 10:53:34 Check angles 10:53:34 SkyScan query 10:53:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 10:53:35 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 10:53:35 Check angles 10:53:35 SkyScan query 10:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.475<-16365 Statuses=0008 0009 10:53:36 Msec=1500 True Az=112.995 Ze=-65.475 Az status=0008 Ze status=0009 10:53:36 Check angles 10:53:36 SkyScan query 10:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 10:53:36 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 10:53:37 Check angles 10:53:37 SkyScan query 10:53:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.88<-19192 Statuses=0008 0009 10:53:37 Msec=3000 True Az=112.995 Ze=-107.88 Az status=0008 Ze status=0009 10:53:37 Check angles 10:53:37 SkyScan query 10:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.24<-20616 Statuses=0008 0009 10:53:38 Msec=3750 True Az=112.995 Ze=-129.24 Az status=0008 Ze status=0009 10:53:38 Check angles 10:53:38 SkyScan query 10:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.165<-22011 Statuses=0008 0009 10:53:39 Msec=4500 True Az=112.995 Ze=-150.165 Az status=0008 Ze status=0009 10:53:39 Check angles 10:53:39 SkyScan query 10:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 10:53:39 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 10:53:40 Check angles 10:53:40 SkyScan query 10:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:53:40 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:53:40 Message to Master queued w/err=0: serial=274585 error=0 10:53:45 Received message from Master: op=Filter serial=274586 10:53:45 Color wheel filter change from 0 to 0 10:53:45 FLIGetFilterPos err=0 currentPosition=0 10:53:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:45 Filter is already there-color wheel unchanged 10:53:45 Received message from Master: op=Shutter serial=274587 10:53:45 Shutter LASER open 10:53:46 Received message from Camera: op=State serial=274589 10:53:46 GetSingleValue result=40 Value=cccccccc 10:53:46 SkyScan query 10:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:46 Parameters OK 10:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:46 Set A/D data flow result=40 10:53:46 Set A/D channel type result=40 10:53:46 Set A/D encoding result=40 10:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:46 Set channel filter=0.000000e+000 result=40 10:53:46 Config A/D Result=40 10:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:46 Get A/D filter: -9.255963e+061 result=40 10:53:46 Get A/D value=-858993460 result=40 10:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:46 Parameters OK 10:53:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:46 Set A/D data flow result=40 10:53:46 Set A/D channel type result=40 10:53:46 Set A/D encoding result=40 10:53:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:46 Set channel filter=0.000000e+000 result=40 10:53:46 Config A/D Result=40 10:53:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:46 Get A/D filter: -9.255963e+061 result=40 10:53:46 Get A/D value=-858993460 result=40 10:53:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:46 Aux= 10:53:46 Message to Camera, serial 274589 queued 10:53:55 Received message from Master: op=Shutter serial=274599 10:53:55 Shutter LASER close 10:53:55 Received message from Master: op=PointingHead serial=274603 10:53:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:53:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:53:55 Point started: ret=0 10:53:55 point_skyscan result=0 10:53:56 Check angles 10:53:56 SkyScan query 10:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 10:53:57 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 10:53:57 Check angles 10:53:57 SkyScan query 10:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 10:53:57 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 10:53:58 Check angles 10:53:58 SkyScan query 10:53:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.205<-18747 Statuses=0008 0009 10:53:58 Msec=1500 True Az=112.995 Ze=-101.205 Az status=0008 Ze status=0009 10:53:58 Check angles 10:53:58 SkyScan query 10:53:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.22<-17348 Statuses=0008 0009 10:53:59 Msec=2250 True Az=112.995 Ze=-80.22 Az status=0008 Ze status=0009 10:53:59 Check angles 10:53:59 SkyScan query 10:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.25<-15950 Statuses=0008 0009 10:54:00 Msec=3000 True Az=112.995 Ze=-59.25 Az status=0008 Ze status=0009 10:54:00 Check angles 10:54:00 SkyScan query 10:54:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.28<-14552 Statuses=0008 0009 10:54:00 Msec=3750 True Az=112.995 Ze=-38.28 Az status=0008 Ze status=0009 10:54:01 Check angles 10:54:01 SkyScan query 10:54:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 10:54:01 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 10:54:01 Check angles 10:54:01 SkyScan query 10:54:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.66<-11756 Statuses=0008 0009 10:54:02 Msec=5250 True Az=112.995 Ze=3.66 Az status=0008 Ze status=0009 10:54:02 Check angles 10:54:02 SkyScan query 10:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:54:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:54:03 Message to Master queued w/err=0: serial=274603 error=0 10:54:08 Received message from Master: op=Filter serial=274604 10:54:08 Color wheel filter change from 0 to 0 10:54:08 FLIGetFilterPos err=0 currentPosition=0 10:54:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:08 Filter is already there-color wheel unchanged 10:54:08 Received message from Master: op=Shutter serial=274605 10:54:08 Shutter LASER close 10:54:08 Received message from Camera: op=State serial=274607 10:54:08 GetSingleValue result=40 Value=cccccccc 10:54:08 SkyScan query 10:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:09 Parameters OK 10:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:09 Set A/D data flow result=40 10:54:09 Set A/D channel type result=40 10:54:09 Set A/D encoding result=40 10:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:09 Set channel filter=0.000000e+000 result=40 10:54:09 Config A/D Result=40 10:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:09 Get A/D filter: -9.255963e+061 result=40 10:54:09 Get A/D value=-858993460 result=40 10:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:09 Parameters OK 10:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:09 Set A/D data flow result=40 10:54:09 Set A/D channel type result=40 [UTC 2019-3-14 10:54:09] 10:54:09 Set A/D encoding result=40 10:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:09 Set channel filter=0.000000e+000 result=40 10:54:09 Config A/D Result=40 10:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:09 Get A/D filter: -9.255963e+061 result=40 10:54:09 Get A/D value=-858993460 result=40 10:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:09 Aux= 10:54:09 Message to Camera, serial 274607 queued 10:54:46 Received message from Master: op=PointingHead serial=274620 10:54:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:54:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:54:46 Point started: ret=0 10:54:46 point_skyscan result=0 10:54:47 Check angles 10:54:47 SkyScan query 10:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:54:47 Message to Master queued w/err=0: serial=274620 error=0 10:54:52 Received message from Master: op=Filter serial=274621 10:54:52 Color wheel filter change from 0 to 0 10:54:52 FLIGetFilterPos err=0 currentPosition=0 10:54:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:52 Filter is already there-color wheel unchanged 10:54:52 Received message from Master: op=Shutter serial=274622 10:54:52 Shutter LASER close 10:54:52 Received message from Camera: op=State serial=274624 10:54:52 GetSingleValue result=40 Value=cccccccc 10:54:52 SkyScan query 10:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:54:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:53 Parameters OK 10:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:53 Set A/D data flow result=40 10:54:53 Set A/D channel type result=40 10:54:53 Set A/D encoding result=40 10:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:53 Set channel filter=0.000000e+000 result=40 10:54:53 Config A/D Result=40 10:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:53 Get A/D filter: -9.255963e+061 result=40 10:54:53 Get A/D value=-858993460 result=40 10:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:53 Parameters OK 10:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:53 Set A/D data flow result=40 10:54:53 Set A/D channel type result=40 10:54:53 Set A/D encoding result=40 10:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:53 Set channel filter=0.000000e+000 result=40 10:54:53 Config A/D Result=40 10:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:53 Get A/D filter: -9.255963e+061 result=40 10:54:53 Get A/D value=-858993460 result=40 10:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:53 Aux= 10:54:53 Message to Camera, serial 274624 queued 10:55:30 Received message from Master: op=PointingHead serial=274637 10:55:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:55:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:55:30 Point started: ret=0 10:55:30 point_skyscan result=0 10:55:31 Check angles 10:55:31 SkyScan query 10:55:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:31 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:55:31 Message to Master queued w/err=0: serial=274637 error=0 10:55:36 Received message from Master: op=Filter serial=274638 10:55:36 Color wheel filter change from 0 to 0 10:55:36 FLIGetFilterPos err=0 currentPosition=0 10:55:36 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:36 Filter is already there-color wheel unchanged 10:55:37 Received message from Master: op=Shutter serial=274639 10:55:37 Shutter LASER close 10:55:37 Received message from Camera: op=State serial=274641 10:55:37 GetSingleValue result=40 Value=cccccccc 10:55:37 SkyScan query 10:55:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:55:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:37 Parameters OK 10:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:37 Set A/D data flow result=40 10:55:37 Set A/D channel type result=40 10:55:37 Set A/D encoding result=40 10:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:37 Set channel filter=0.000000e+000 result=40 10:55:37 Config A/D Result=40 10:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:37 Get A/D filter: -9.255963e+061 result=40 10:55:37 Get A/D value=-858993460 result=40 10:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:37 Parameters OK 10:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:37 Set A/D data flow result=40 10:55:37 Set A/D channel type result=40 10:55:37 Set A/D encoding result=40 10:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:37 Set channel filter=0.000000e+000 result=40 10:55:37 Config A/D Result=40 10:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:37 Get A/D filter: -9.255963e+061 result=40 10:55:37 Get A/D value=-858993460 result=40 10:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:37 Aux= 10:55:37 Message to Camera, serial 274641 queued 10:56:14 Received message from Master: op=PointingHead serial=274654 10:56:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:56:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:56:14 Point started: ret=0 10:56:14 point_skyscan result=0 10:56:15 Check angles 10:56:15 SkyScan query 10:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:56:16 Message to Master queued w/err=0: serial=274654 error=0 10:56:21 Received message from Master: op=Filter serial=274655 10:56:21 Color wheel filter change from 0 to 0 10:56:21 FLIGetFilterPos err=0 currentPosition=0 10:56:21 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:21 Filter is already there-color wheel unchanged 10:56:21 Received message from Master: op=Shutter serial=274656 10:56:21 Shutter LASER close 10:56:21 Received message from Camera: op=State serial=274658 10:56:21 GetSingleValue result=40 Value=cccccccc 10:56:21 SkyScan query 10:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:56:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:21 Parameters OK 10:56:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:21 Set A/D data flow result=40 10:56:21 Set A/D channel type result=40 10:56:21 Set A/D encoding result=40 10:56:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:21 Set channel filter=0.000000e+000 result=40 10:56:21 Config A/D Result=40 10:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:21 Get A/D filter: -9.255963e+061 result=40 10:56:21 Get A/D value=-858993460 result=40 10:56:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:21 Parameters OK 10:56:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:21 Set A/D data flow result=40 10:56:21 Set A/D channel type result=40 10:56:21 Set A/D encoding result=40 10:56:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:21 Set channel filter=0.000000e+000 result=40 10:56:21 Config A/D Result=40 10:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:21 Get A/D filter: -9.255963e+061 result=40 10:56:21 Get A/D value=-858993460 result=40 10:56:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:21 Aux= 10:56:21 Message to Camera, serial 274658 queued 10:56:58 Received message from Master: op=PointingHead serial=274671 10:56:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:56:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:56:59 Point started: ret=0 10:56:59 point_skyscan result=0 10:56:59 Check angles 10:56:59 SkyScan query 10:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 10:57:00 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 10:57:00 Check angles 10:57:00 SkyScan query 10:57:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 10:57:01 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 10:57:01 Check angles 10:57:01 SkyScan query 10:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 10:57:02 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 10:57:02 Check angles 10:57:02 SkyScan query 10:57:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.7<-17780 Statuses=0008 0009 10:57:02 Msec=2250 True Az=112.995 Ze=-86.7 Az status=0008 Ze status=0009 10:57:02 Check angles 10:57:02 SkyScan query 10:57:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.135<-19209 Statuses=0008 0009 10:57:03 Msec=3000 True Az=112.995 Ze=-108.135 Az status=0008 Ze status=0009 10:57:03 Check angles 10:57:03 SkyScan query 10:57:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.06<-20604 Statuses=0008 0009 10:57:04 Msec=3750 True Az=112.995 Ze=-129.06 Az status=0008 Ze status=0009 10:57:04 Check angles 10:57:04 SkyScan query 10:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.045<-22003 Statuses=0008 0009 10:57:05 Msec=4500 True Az=112.995 Ze=-150.045 Az status=0008 Ze status=0009 10:57:05 Check angles 10:57:05 SkyScan query 10:57:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 10:57:05 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 10:57:06 Check angles 10:57:06 SkyScan query 10:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:57:06 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:57:06 Message to Master queued w/err=0: serial=274671 error=0 10:57:11 Received message from Master: op=Filter serial=274672 10:57:11 Color wheel filter change from 0 to 0 10:57:11 FLIGetFilterPos err=0 currentPosition=0 10:57:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:11 Filter is already there-color wheel unchanged 10:57:11 Received message from Master: op=Shutter serial=274673 10:57:11 Shutter LASER open 10:57:11 Received message from Camera: op=State serial=274675 10:57:11 GetSingleValue result=40 Value=cccccccc 10:57:11 SkyScan query 10:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:57:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:12 Parameters OK 10:57:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:12 Set A/D data flow result=40 10:57:12 Set A/D channel type result=40 10:57:12 Set A/D encoding result=40 10:57:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:12 Set channel filter=0.000000e+000 result=40 10:57:12 Config A/D Result=40 10:57:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:12 Get A/D filter: -9.255963e+061 result=40 10:57:12 Get A/D value=-858993460 result=40 10:57:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:12 Parameters OK 10:57:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:12 Set A/D data flow result=40 10:57:12 Set A/D channel type result=40 10:57:12 Set A/D encoding result=40 10:57:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:12 Set channel filter=0.000000e+000 result=40 10:57:12 Config A/D Result=40 10:57:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:12 Get A/D filter: -9.255963e+061 result=40 10:57:12 Get A/D value=-858993460 result=40 10:57:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:12 Aux= 10:57:12 Message to Camera, serial 274675 queued 10:57:20 Received message from Master: op=Shutter serial=274685 10:57:20 Shutter LASER close 10:57:21 Received message from Master: op=PointingHead serial=274689 10:57:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:57:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:57:21 Point started: ret=0 10:57:21 point_skyscan result=0 10:57:22 Check angles 10:57:22 SkyScan query 10:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 10:57:23 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 10:57:23 Check angles 10:57:23 SkyScan query 10:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.4<-20160 Statuses=0008 0009 10:57:24 Msec=750 True Az=112.995 Ze=-122.4 Az status=0008 Ze status=0009 10:57:24 Check angles 10:57:24 SkyScan query 10:57:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.445<-18763 Statuses=0008 0009 10:57:24 Msec=1500 True Az=112.995 Ze=-101.445 Az status=0008 Ze status=0009 10:57:24 Check angles 10:57:24 SkyScan query 10:57:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.46<-17364 Statuses=0008 0009 10:57:25 Msec=2250 True Az=112.995 Ze=-80.46 Az status=0008 Ze status=0009 10:57:25 Check angles 10:57:25 SkyScan query 10:57:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.085<-15939 Statuses=0008 0009 10:57:26 Msec=3000 True Az=112.995 Ze=-59.085 Az status=0008 Ze status=0009 10:57:26 Check angles 10:57:26 SkyScan query 10:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 10:57:27 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 10:57:27 Check angles 10:57:27 SkyScan query 10:57:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.29<-13086 Statuses=0008 0009 10:57:27 Msec=4500 True Az=112.995 Ze=-16.29 Az status=0008 Ze status=0009 10:57:28 Check angles 10:57:28 SkyScan query 10:57:28 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 10:57:28 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 10:57:28 Check angles 10:57:28 SkyScan query 10:57:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 10:57:29 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 10:57:29 Message to Master queued w/err=0: serial=274689 error=0 10:57:34 Received message from Master: op=Filter serial=274690 10:57:34 Color wheel filter change from 0 to 0 10:57:34 FLIGetFilterPos err=0 currentPosition=0 10:57:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:34 Filter is already there-color wheel unchanged 10:57:34 Received message from Master: op=Shutter serial=274691 10:57:34 Shutter LASER close 10:57:34 Received message from Camera: op=State serial=274693 10:57:34 GetSingleValue result=40 Value=cccccccc 10:57:34 SkyScan query 10:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:57:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:35 Parameters OK 10:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:35 Set A/D data flow result=40 10:57:35 Set A/D channel type result=40 10:57:35 Set A/D encoding result=40 10:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:35 Set channel filter=0.000000e+000 result=40 10:57:35 Config A/D Result=40 10:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:35 Get A/D filter: -9.255963e+061 result=40 10:57:35 Get A/D value=-858993460 result=40 10:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:35 Parameters OK 10:57:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:35 Set A/D data flow result=40 10:57:35 Set A/D channel type result=40 10:57:35 Set A/D encoding result=40 10:57:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:35 Set channel filter=0.000000e+000 result=40 10:57:35 Config A/D Result=40 10:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:35 Get A/D filter: -9.255963e+061 result=40 10:57:35 Get A/D value=-858993460 result=40 10:57:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:35 Aux= 10:57:35 Message to Camera, serial 274693 queued 10:58:11 Received message from Master: op=PointingHead serial=274705 10:58:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:58:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:58:11 Point started: ret=0 10:58:11 point_skyscan result=0 10:58:12 Check angles 10:58:12 SkyScan query 10:58:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:58:12 Message to Master queued w/err=0: serial=274705 error=0 10:58:17 Received message from Master: op=Filter serial=274706 10:58:17 Color wheel filter change from 0 to 0 10:58:17 FLIGetFilterPos err=0 currentPosition=0 10:58:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:17 Filter is already there-color wheel unchanged 10:58:17 Received message from Master: op=Shutter serial=274707 10:58:17 Shutter LASER close 10:58:18 Received message from Camera: op=State serial=274709 10:58:18 GetSingleValue result=40 Value=cccccccc 10:58:18 SkyScan query 10:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:58:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:18 Parameters OK 10:58:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:18 Set A/D data flow result=40 10:58:18 Set A/D channel type result=40 10:58:18 Set A/D encoding result=40 10:58:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:18 Set channel filter=0.000000e+000 result=40 10:58:18 Config A/D Result=40 10:58:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:18 Get A/D filter: -9.255963e+061 result=40 10:58:18 Get A/D value=-858993460 result=40 10:58:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:18 Parameters OK 10:58:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:18 Set A/D data flow result=40 10:58:18 Set A/D channel type result=40 10:58:18 Set A/D encoding result=40 10:58:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:18 Set channel filter=0.000000e+000 result=40 10:58:18 Config A/D Result=40 10:58:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:18 Get A/D filter: -9.255963e+061 result=40 10:58:18 Get A/D value=-858993460 result=40 10:58:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:18 Aux= 10:58:18 Message to Camera, serial 274709 queued 10:58:55 Received message from Master: op=PointingHead serial=274722 10:58:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 10:58:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 10:58:55 Point started: ret=0 10:58:55 point_skyscan result=0 10:58:56 Check angles 10:58:56 SkyScan query 10:58:57 SkyScan query done: ret=0 az=136.32<-9088 ze=-6.51<-12434 Statuses=0009 0008 10:58:57 Msec=0 True Az=136.32 Ze=-6.51 Az status=0009 Ze status=0008 10:58:57 Check angles 10:58:57 SkyScan query 10:58:57 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.495<-12433 Statuses=0009 0008 10:58:57 Msec=750 True Az=154.14 Ze=-6.495 Az status=0009 Ze status=0008 10:58:58 Check angles 10:58:58 SkyScan query 10:58:58 SkyScan query done: ret=0 az=171.555<-11437 ze=-6.495<-12433 Statuses=0009 0008 10:58:58 Msec=1500 True Az=171.555 Ze=-6.495 Az status=0009 Ze status=0008 10:58:58 Check angles 10:58:58 SkyScan query 10:58:59 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 10:58:59 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 10:58:59 Message to Master queued w/err=0: serial=274722 error=0 10:59:04 Received message from Master: op=Filter serial=274723 10:59:04 Color wheel filter change from 0 to 0 10:59:04 FLIGetFilterPos err=0 currentPosition=0 10:59:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:04 Filter is already there-color wheel unchanged 10:59:04 Received message from Master: op=Shutter serial=274724 10:59:04 Shutter LASER close 10:59:04 Received message from Camera: op=State serial=274726 10:59:04 GetSingleValue result=40 Value=cccccccc 10:59:04 SkyScan query 10:59:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 10:59:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:05 Parameters OK 10:59:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:05 Set A/D data flow result=40 10:59:05 Set A/D channel type result=40 10:59:05 Set A/D encoding result=40 10:59:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:05 Set channel filter=0.000000e+000 result=40 10:59:05 Config A/D Result=40 10:59:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:05 Get A/D filter: -9.255963e+061 result=40 10:59:05 Get A/D value=-858993460 result=40 10:59:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:05 Aux= 10:59:05 Message to Camera, serial 274726 queued 10:59:41 Received message from Master: op=PointingHead serial=274739 10:59:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 10:59:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 10:59:42 Point started: ret=0 10:59:42 point_skyscan result=0 10:59:43 Check angles 10:59:43 SkyScan query 10:59:43 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 10:59:43 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 10:59:43 Check angles 10:59:43 SkyScan query 10:59:44 SkyScan query done: ret=0 az=135.465<-9031 ze=6.495<-11567 Statuses=0009 0008 10:59:44 Msec=750 True Az=135.465 Ze=6.495 Az status=0009 Ze status=0008 10:59:44 Check angles 10:59:44 SkyScan query 10:59:45 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 10:59:45 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 10:59:45 Check angles 10:59:45 SkyScan query 10:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:45 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 10:59:45 Message to Master queued w/err=0: serial=274739 error=0 10:59:50 Received message from Master: op=Filter serial=274740 10:59:50 Color wheel filter change from 0 to 0 10:59:50 FLIGetFilterPos err=0 currentPosition=0 10:59:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:50 Filter is already there-color wheel unchanged 10:59:51 Received message from Master: op=Shutter serial=274741 10:59:51 Shutter LASER close 10:59:51 Received message from Camera: op=State serial=274743 10:59:51 GetSingleValue result=40 Value=cccccccc 10:59:51 SkyScan query 10:59:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 10:59:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:51 Parameters OK 10:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:51 Set A/D data flow result=40 10:59:51 Set A/D channel type result=40 10:59:51 Set A/D encoding result=40 10:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:51 Set channel filter=0.000000e+000 result=40 10:59:51 Config A/D Result=40 10:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:51 Get A/D filter: -9.255963e+061 result=40 10:59:51 Get A/D value=-858993460 result=40 10:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:51 Parameters OK 10:59:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:51 Set A/D data flow result=40 10:59:51 Set A/D channel type result=40 10:59:51 Set A/D encoding result=40 10:59:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:51 Set channel filter=0.000000e+000 result=40 10:59:51 Config A/D Result=40 10:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:51 Get A/D filter: -9.255963e+061 result=40 10:59:51 Get A/D value=-858993460 result=40 10:59:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:51 Aux= 10:59:51 Message to Camera, serial 274743 queued 11:00:28 Received message from Master: op=PointingHead serial=274756 11:00:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:00:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:00:28 Point started: ret=0 11:00:28 point_skyscan result=0 11:00:29 Check angles 11:00:29 SkyScan query 11:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.82<-13588 Statuses=0008 0009 11:00:30 Msec=0 True Az=112.995 Ze=-23.82 Az status=0008 Ze status=0009 11:00:30 Check angles 11:00:30 SkyScan query 11:00:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 11:00:30 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 11:00:31 Check angles 11:00:31 SkyScan query 11:00:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 11:00:31 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 11:00:31 Check angles 11:00:31 SkyScan query 11:00:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 11:00:32 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 11:00:32 Check angles 11:00:32 SkyScan query 11:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.67<-19178 Statuses=0008 0009 11:00:33 Msec=3000 True Az=112.995 Ze=-107.67 Az status=0008 Ze status=0009 11:00:33 Check angles 11:00:33 SkyScan query 11:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.595<-20573 Statuses=0008 0009 11:00:33 Msec=3750 True Az=112.995 Ze=-128.595 Az status=0008 Ze status=0009 11:00:34 Check angles 11:00:34 SkyScan query 11:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 11:00:34 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 11:00:34 Check angles 11:00:34 SkyScan query 11:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 11:00:35 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 11:00:35 Check angles 11:00:35 SkyScan query 11:00:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:00:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:00:36 Message to Master queued w/err=0: serial=274756 error=0 11:00:41 Received message from Master: op=Filter serial=274757 11:00:41 Color wheel filter change from 0 to 0 11:00:41 FLIGetFilterPos err=0 currentPosition=0 11:00:41 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:41 Filter is already there-color wheel unchanged 11:00:41 Received message from Master: op=Shutter serial=274758 11:00:41 Shutter LASER open 11:00:41 Received message from Camera: op=State serial=274760 11:00:41 GetSingleValue result=40 Value=cccccccc 11:00:41 SkyScan query 11:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:00:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:42 Parameters OK 11:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:42 Set A/D data flow result=40 11:00:42 Set A/D channel type result=40 11:00:42 Set A/D encoding result=40 11:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:42 Set channel filter=0.000000e+000 result=40 11:00:42 Config A/D Result=40 11:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:42 Get A/D filter: -9.255963e+061 result=40 11:00:42 Get A/D value=-858993460 result=40 11:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:42 Parameters OK 11:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:42 Set A/D data flow result=40 11:00:42 Set A/D channel type result=40 11:00:42 Set A/D encoding result=40 11:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:42 Set channel filter=0.000000e+000 result=40 11:00:42 Config A/D Result=40 11:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:42 Get A/D filter: -9.255963e+061 result=40 11:00:42 Get A/D value=-858993460 result=40 11:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:42 Aux= 11:00:42 Message to Camera, serial 274760 queued 11:00:50 Received message from Master: op=Shutter serial=274770 11:00:50 Shutter LASER close 11:00:51 Received message from Master: op=PointingHead serial=274774 11:00:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:00:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:00:51 Point started: ret=0 11:00:51 point_skyscan result=0 11:00:52 Check angles 11:00:52 SkyScan query 11:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 11:00:52 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 11:00:52 Check angles 11:00:52 SkyScan query 11:00:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.605<-20107 Statuses=0008 0009 11:00:53 Msec=750 True Az=112.995 Ze=-121.605 Az status=0008 Ze status=0009 11:00:53 Check angles 11:00:53 SkyScan query 11:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.665<-18711 Statuses=0008 0009 11:00:54 Msec=1500 True Az=112.995 Ze=-100.665 Az status=0008 Ze status=0009 11:00:54 Check angles 11:00:54 SkyScan query 11:00:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.68<-17312 Statuses=0008 0009 11:00:54 Msec=2250 True Az=112.995 Ze=-79.68 Az status=0008 Ze status=0009 11:00:55 Check angles 11:00:55 SkyScan query 11:00:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.275<-15885 Statuses=0008 0009 11:00:55 Msec=3000 True Az=112.995 Ze=-58.275 Az status=0008 Ze status=0009 11:00:55 Check angles 11:00:55 SkyScan query 11:00:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.365<-14491 Statuses=0008 0009 11:00:56 Msec=3750 True Az=112.995 Ze=-37.365 Az status=0008 Ze status=0009 11:00:56 Check angles 11:00:56 SkyScan query 11:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.395<-13093 Statuses=0008 0009 11:00:57 Msec=4500 True Az=112.995 Ze=-16.395 Az status=0008 Ze status=0009 11:00:57 Check angles 11:00:57 SkyScan query 11:00:57 SkyScan query done: ret=0 az=112.995<-7533 ze=4.44<-11704 Statuses=0008 0009 11:00:57 Msec=5250 True Az=112.995 Ze=4.44 Az status=0008 Ze status=0009 11:00:58 Check angles 11:00:58 SkyScan query 11:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:00:58 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:00:58 Message to Master queued w/err=0: serial=274774 error=0 11:01:03 Received message from Master: op=Filter serial=274775 11:01:03 Color wheel filter change from 0 to 0 11:01:03 FLIGetFilterPos err=0 currentPosition=0 11:01:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:03 Filter is already there-color wheel unchanged 11:01:03 Received message from Master: op=Shutter serial=274776 11:01:03 Shutter LASER close 11:01:04 Received message from Camera: op=State serial=274778 11:01:04 GetSingleValue result=40 Value=cccccccc 11:01:04 SkyScan query 11:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:04 Parameters OK 11:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:04 Set A/D data flow result=40 11:01:04 Set A/D channel type result=40 11:01:04 Set A/D encoding result=40 11:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:04 Set channel filter=0.000000e+000 result=40 11:01:04 Config A/D Result=40 11:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:04 Get A/D filter: -9.255963e+061 result=40 11:01:04 Get A/D value=-858993460 result=40 11:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:04 Parameters OK 11:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:04 Set A/D data flow result=40 11:01:04 Set A/D channel type result=40 11:01:04 Set A/D encoding result=40 11:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:04 Set channel filter=0.000000e+000 result=40 11:01:04 Config A/D Result=40 11:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:04 Get A/D filter: -9.255963e+061 result=40 11:01:04 Get A/D value=-858993460 result=40 11:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:04 Aux= 11:01:04 Message to Camera, serial 274778 queued 11:01:41 Received message from Master: op=PointingHead serial=274791 11:01:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:01:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:01:41 Point started: ret=0 11:01:41 point_skyscan result=0 11:01:42 Check angles 11:01:42 SkyScan query 11:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:01:43 Message to Master queued w/err=0: serial=274791 error=0 11:01:48 Received message from Master: op=Filter serial=274792 11:01:48 Color wheel filter change from 0 to 0 11:01:48 FLIGetFilterPos err=0 currentPosition=0 11:01:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:48 Filter is already there-color wheel unchanged 11:01:48 Received message from Master: op=Shutter serial=274793 11:01:48 Shutter LASER close 11:01:48 Received message from Camera: op=State serial=274795 11:01:48 GetSingleValue result=40 Value=cccccccc 11:01:48 SkyScan query 11:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:48 Parameters OK 11:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:48 Set A/D data flow result=40 11:01:48 Set A/D channel type result=40 11:01:48 Set A/D encoding result=40 11:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:48 Set channel filter=0.000000e+000 result=40 11:01:48 Config A/D Result=40 11:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:48 Get A/D filter: -9.255963e+061 result=40 11:01:48 Get A/D value=-858993460 result=40 11:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:48 Parameters OK 11:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:48 Set A/D data flow result=40 11:01:48 Set A/D channel type result=40 11:01:48 Set A/D encoding result=40 11:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:48 Set channel filter=0.000000e+000 result=40 11:01:48 Config A/D Result=40 11:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:48 Get A/D filter: -9.255963e+061 result=40 11:01:48 Get A/D value=-858993460 result=40 11:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:48 Aux= 11:01:48 Message to Camera, serial 274795 queued 11:02:25 Received message from Master: op=PointingHead serial=274808 11:02:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:02:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:02:26 Point started: ret=0 11:02:26 point_skyscan result=0 11:02:27 Check angles 11:02:27 SkyScan query 11:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:02:27 Message to Master queued w/err=0: serial=274808 error=0 11:02:32 Received message from Master: op=Filter serial=274809 11:02:32 Color wheel filter change from 0 to 0 11:02:32 FLIGetFilterPos err=0 currentPosition=0 11:02:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:32 Filter is already there-color wheel unchanged 11:02:32 Received message from Master: op=Shutter serial=274810 11:02:32 Shutter LASER close 11:02:32 Received message from Camera: op=State serial=274812 11:02:32 GetSingleValue result=40 Value=cccccccc 11:02:32 SkyScan query 11:02:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:02:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:33 Parameters OK 11:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:33 Set A/D data flow result=40 11:02:33 Set A/D channel type result=40 11:02:33 Set A/D encoding result=40 11:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:33 Set channel filter=0.000000e+000 result=40 11:02:33 Config A/D Result=40 11:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:33 Get A/D filter: -9.255963e+061 result=40 11:02:33 Get A/D value=-858993460 result=40 11:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:33 Parameters OK 11:02:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:33 Set A/D data flow result=40 11:02:33 Set A/D channel type result=40 11:02:33 Set A/D encoding result=40 11:02:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:33 Set channel filter=0.000000e+000 result=40 11:02:33 Config A/D Result=40 11:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:33 Get A/D filter: -9.255963e+061 result=40 11:02:33 Get A/D value=-858993460 result=40 11:02:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:33 Aux= 11:02:33 Message to Camera, serial 274812 queued 11:03:10 Received message from Master: op=PointingHead serial=274825 11:03:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:03:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:03:10 Point started: ret=0 11:03:10 point_skyscan result=0 11:03:11 Check angles 11:03:11 SkyScan query 11:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:03:11 Message to Master queued w/err=0: serial=274825 error=0 11:03:16 Received message from Master: op=Filter serial=274826 11:03:16 Color wheel filter change from 0 to 0 11:03:16 FLIGetFilterPos err=0 currentPosition=0 11:03:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:16 Filter is already there-color wheel unchanged 11:03:17 Received message from Master: op=Shutter serial=274827 11:03:17 Shutter LASER close 11:03:17 Received message from Camera: op=State serial=274829 11:03:17 GetSingleValue result=40 Value=cccccccc 11:03:17 SkyScan query 11:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:03:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:17 Parameters OK 11:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:17 Set A/D data flow result=40 11:03:17 Set A/D channel type result=40 11:03:17 Set A/D encoding result=40 11:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:17 Set channel filter=0.000000e+000 result=40 11:03:17 Config A/D Result=40 11:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:17 Get A/D filter: -9.255963e+061 result=40 11:03:17 Get A/D value=-858993460 result=40 11:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:17 Parameters OK 11:03:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:17 Set A/D data flow result=40 11:03:17 Set A/D channel type result=40 11:03:17 Set A/D encoding result=40 11:03:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:17 Set channel filter=0.000000e+000 result=40 11:03:17 Config A/D Result=40 11:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:17 Get A/D filter: -9.255963e+061 result=40 11:03:17 Get A/D value=-858993460 result=40 11:03:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:17 Aux= 11:03:17 Message to Camera, serial 274829 queued 11:03:35 Received message from Master: op=Identify serial=274830 [UTC 2019-3-14 11:03:48] 11:03:54 Received message from Master: op=PointingHead serial=274845 11:03:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:03:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:03:54 Point started: ret=0 11:03:54 point_skyscan result=0 11:03:55 Check angles 11:03:55 SkyScan query 11:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 11:03:56 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 11:03:56 Check angles 11:03:56 SkyScan query 11:03:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.22<-14948 Statuses=0008 0009 11:03:56 Msec=750 True Az=112.995 Ze=-44.22 Az status=0008 Ze status=0009 11:03:57 Check angles 11:03:57 SkyScan query 11:03:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 11:03:57 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 11:03:57 Check angles 11:03:57 SkyScan query 11:03:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 11:03:58 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 11:03:58 Check angles 11:03:58 SkyScan query 11:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.835<-19189 Statuses=0008 0009 11:03:59 Msec=3000 True Az=112.995 Ze=-107.835 Az status=0008 Ze status=0009 11:03:59 Check angles 11:03:59 SkyScan query 11:03:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 11:03:59 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 11:04:00 Check angles 11:04:00 SkyScan query 11:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 11:04:00 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 11:04:00 Check angles 11:04:00 SkyScan query 11:04:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.985<-23399 Statuses=0008 0009 11:04:01 Msec=5250 True Az=112.995 Ze=-170.985 Az status=0008 Ze status=0009 11:04:01 Check angles 11:04:01 SkyScan query 11:04:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:04:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:04:02 Message to Master queued w/err=0: serial=274845 error=0 11:04:07 Received message from Master: op=Filter serial=274846 11:04:07 Color wheel filter change from 0 to 0 11:04:07 FLIGetFilterPos err=0 currentPosition=0 11:04:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:07 Filter is already there-color wheel unchanged 11:04:07 Received message from Master: op=Shutter serial=274847 11:04:07 Shutter LASER open 11:04:07 Received message from Camera: op=State serial=274849 11:04:07 GetSingleValue result=40 Value=cccccccc 11:04:07 SkyScan query 11:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:08 Parameters OK 11:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:08 Set A/D data flow result=40 11:04:08 Set A/D channel type result=40 11:04:08 Set A/D encoding result=40 11:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:08 Set channel filter=0.000000e+000 result=40 11:04:08 Config A/D Result=40 11:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:08 Get A/D filter: -9.255963e+061 result=40 11:04:08 Get A/D value=-858993460 result=40 11:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:08 Parameters OK 11:04:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:08 Set A/D data flow result=40 11:04:08 Set A/D channel type result=40 11:04:08 Set A/D encoding result=40 11:04:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:08 Set channel filter=0.000000e+000 result=40 11:04:08 Config A/D Result=40 11:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:08 Get A/D filter: -9.255963e+061 result=40 11:04:08 Get A/D value=-858993460 result=40 11:04:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:08 Aux= 11:04:08 Message to Camera, serial 274849 queued 11:04:16 Received message from Master: op=Shutter serial=274859 11:04:16 Shutter LASER close 11:04:17 Received message from Master: op=PointingHead serial=274863 11:04:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:04:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:04:17 Point started: ret=0 11:04:17 point_skyscan result=0 11:04:18 Check angles 11:04:18 SkyScan query 11:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.37<-21558 Statuses=0008 0009 11:04:18 Msec=0 True Az=112.995 Ze=-143.37 Az status=0008 Ze status=0009 11:04:19 Check angles 11:04:19 SkyScan query 11:04:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.415<-20161 Statuses=0008 0009 11:04:19 Msec=750 True Az=112.995 Ze=-122.415 Az status=0008 Ze status=0009 11:04:19 Check angles 11:04:19 SkyScan query 11:04:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.475<-18765 Statuses=0008 0009 11:04:20 Msec=1500 True Az=112.995 Ze=-101.475 Az status=0008 Ze status=0009 11:04:20 Check angles 11:04:20 SkyScan query 11:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.49<-17366 Statuses=0008 0009 11:04:21 Msec=2250 True Az=112.995 Ze=-80.49 Az status=0008 Ze status=0009 11:04:21 Check angles 11:04:21 SkyScan query 11:04:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.565<-15971 Statuses=0008 0009 11:04:21 Msec=3000 True Az=112.995 Ze=-59.565 Az status=0008 Ze status=0009 11:04:22 Check angles 11:04:22 SkyScan query 11:04:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.595<-14573 Statuses=0008 0009 11:04:22 Msec=3750 True Az=112.995 Ze=-38.595 Az status=0008 Ze status=0009 11:04:22 Check angles 11:04:22 SkyScan query 11:04:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.64<-13176 Statuses=0008 0009 11:04:23 Msec=4500 True Az=112.995 Ze=-17.64 Az status=0008 Ze status=0009 11:04:23 Check angles 11:04:23 SkyScan query 11:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=3.81<-11746 Statuses=0008 0009 11:04:24 Msec=5250 True Az=112.995 Ze=3.81 Az status=0008 Ze status=0009 11:04:24 Check angles 11:04:24 SkyScan query 11:04:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:04:24 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:04:24 Message to Master queued w/err=0: serial=274863 error=0 11:04:29 Received message from Master: op=Filter serial=274864 11:04:29 Color wheel filter change from 0 to 0 11:04:29 FLIGetFilterPos err=0 currentPosition=0 11:04:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:29 Filter is already there-color wheel unchanged 11:04:30 Received message from Master: op=Shutter serial=274865 11:04:30 Shutter LASER close 11:04:30 Received message from Camera: op=State serial=274867 11:04:30 GetSingleValue result=40 Value=cccccccc 11:04:30 SkyScan query 11:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:04:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:30 Parameters OK 11:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:30 Set A/D data flow result=40 11:04:30 Set A/D channel type result=40 11:04:30 Set A/D encoding result=40 11:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:30 Set channel filter=0.000000e+000 result=40 11:04:30 Config A/D Result=40 11:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:30 Get A/D filter: -9.255963e+061 result=40 11:04:30 Get A/D value=-858993460 result=40 11:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:30 Parameters OK 11:04:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:30 Set A/D data flow result=40 11:04:30 Set A/D channel type result=40 11:04:30 Set A/D encoding result=40 11:04:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:30 Set channel filter=0.000000e+000 result=40 11:04:30 Config A/D Result=40 11:04:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:30 Get A/D filter: -9.255963e+061 result=40 11:04:30 Get A/D value=-858993460 result=40 11:04:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:30 Aux= 11:04:30 Message to Camera, serial 274867 queued 11:05:07 Received message from Master: op=PointingHead serial=274880 11:05:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:05:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:05:07 Point started: ret=0 11:05:07 point_skyscan result=0 11:05:08 Check angles 11:05:08 SkyScan query 11:05:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:05:09 Message to Master queued w/err=0: serial=274880 error=0 11:05:14 Received message from Master: op=Filter serial=274881 11:05:14 Color wheel filter change from 0 to 0 11:05:14 FLIGetFilterPos err=0 currentPosition=0 11:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:14 Filter is already there-color wheel unchanged 11:05:14 Received message from Master: op=Shutter serial=274882 11:05:14 Shutter LASER close 11:05:14 Received message from Camera: op=State serial=274884 11:05:14 GetSingleValue result=40 Value=cccccccc 11:05:14 SkyScan query 11:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:15 Parameters OK 11:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:15 Set A/D data flow result=40 11:05:15 Set A/D channel type result=40 11:05:15 Set A/D encoding result=40 11:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:15 Set channel filter=0.000000e+000 result=40 11:05:15 Config A/D Result=40 11:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:15 Get A/D filter: -9.255963e+061 result=40 11:05:15 Get A/D value=-858993460 result=40 11:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:15 Parameters OK 11:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:15 Set A/D data flow result=40 11:05:15 Set A/D channel type result=40 11:05:15 Set A/D encoding result=40 11:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:15 Set channel filter=0.000000e+000 result=40 11:05:15 Config A/D Result=40 11:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:15 Get A/D filter: -9.255963e+061 result=40 11:05:15 Get A/D value=-858993460 result=40 11:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:15 Aux= 11:05:15 Message to Camera, serial 274884 queued 11:05:51 Received message from Master: op=PointingHead serial=274897 11:05:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:05:51 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:05:52 Point started: ret=0 11:05:52 point_skyscan result=0 11:05:53 Check angles 11:05:53 SkyScan query 11:05:53 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 11:05:53 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 11:05:53 Check angles 11:05:53 SkyScan query 11:05:54 SkyScan query done: ret=0 az=153.465<-10231 ze=-6.495<-12433 Statuses=0009 0008 11:05:54 Msec=750 True Az=153.465 Ze=-6.495 Az status=0009 Ze status=0008 11:05:54 Check angles 11:05:54 SkyScan query 11:05:55 SkyScan query done: ret=0 az=170.865<-11391 ze=-6.495<-12433 Statuses=0009 0008 11:05:55 Msec=1500 True Az=170.865 Ze=-6.495 Az status=0009 Ze status=0008 11:05:55 Check angles 11:05:55 SkyScan query 11:05:55 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:05:55 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:05:55 Message to Master queued w/err=0: serial=274897 error=0 11:06:00 Received message from Master: op=Filter serial=274898 11:06:00 Color wheel filter change from 0 to 0 11:06:00 FLIGetFilterPos err=0 currentPosition=0 11:06:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:00 Filter is already there-color wheel unchanged 11:06:01 Received message from Master: op=Shutter serial=274899 11:06:01 Shutter LASER close 11:06:01 Received message from Camera: op=State serial=274901 11:06:01 GetSingleValue result=40 Value=cccccccc 11:06:01 SkyScan query 11:06:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:06:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:01 Parameters OK 11:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:01 Set A/D data flow result=40 11:06:01 Set A/D channel type result=40 11:06:01 Set A/D encoding result=40 11:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:01 Set channel filter=0.000000e+000 result=40 11:06:01 Config A/D Result=40 11:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:01 Get A/D filter: -9.255963e+061 result=40 11:06:01 Get A/D value=-858993460 result=40 11:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:01 Parameters OK 11:06:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:01 Set A/D data flow result=40 11:06:01 Set A/D channel type result=40 11:06:01 Set A/D encoding result=40 11:06:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:01 Set channel filter=0.000000e+000 result=40 11:06:01 Config A/D Result=40 11:06:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:01 Get A/D filter: -9.255963e+061 result=40 11:06:01 Get A/D value=-858993460 result=40 11:06:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:01 Aux= 11:06:01 Message to Camera, serial 274901 queued 11:06:38 Received message from Master: op=PointingHead serial=274914 11:06:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:06:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:06:38 Point started: ret=0 11:06:38 point_skyscan result=0 11:06:39 Check angles 11:06:39 SkyScan query 11:06:40 SkyScan query done: ret=0 az=152.715<-10181 ze=6.51<-11566 Statuses=0009 0008 11:06:40 Msec=0 True Az=152.715 Ze=6.51 Az status=0009 Ze status=0008 11:06:40 Check angles 11:06:40 SkyScan query 11:06:40 SkyScan query done: ret=0 az=135.3<-9020 ze=6.495<-11567 Statuses=0009 0008 11:06:40 Msec=750 True Az=135.3 Ze=6.495 Az status=0009 Ze status=0008 11:06:41 Check angles 11:06:41 SkyScan query 11:06:41 SkyScan query done: ret=0 az=117.465<-7831 ze=6.495<-11567 Statuses=0009 0008 11:06:41 Msec=1500 True Az=117.465 Ze=6.495 Az status=0009 Ze status=0008 11:06:41 Check angles 11:06:41 SkyScan query 11:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:06:42 Message to Master queued w/err=0: serial=274914 error=0 11:06:47 Received message from Master: op=Filter serial=274915 11:06:47 Color wheel filter change from 0 to 0 11:06:47 FLIGetFilterPos err=0 currentPosition=0 11:06:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:47 Filter is already there-color wheel unchanged 11:06:47 Received message from Master: op=Shutter serial=274916 11:06:47 Shutter LASER close 11:06:47 Received message from Camera: op=State serial=274918 11:06:47 GetSingleValue result=40 Value=cccccccc 11:06:47 SkyScan query 11:06:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:06:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:48 Parameters OK 11:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:48 Set A/D data flow result=40 11:06:48 Set A/D channel type result=40 11:06:48 Set A/D encoding result=40 11:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:48 Set channel filter=0.000000e+000 result=40 11:06:48 Config A/D Result=40 11:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:48 Get A/D filter: -9.255963e+061 result=40 11:06:48 Get A/D value=-858993460 result=40 11:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:48 Parameters OK 11:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:48 Set A/D data flow result=40 11:06:48 Set A/D channel type result=40 11:06:48 Set A/D encoding result=40 11:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:48 Set channel filter=0.000000e+000 result=40 11:06:48 Config A/D Result=40 11:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:48 Get A/D filter: -9.255963e+061 result=40 11:06:48 Get A/D value=-858993460 result=40 11:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:48 Aux= 11:06:48 Message to Camera, serial 274918 queued 11:07:24 Received message from Master: op=PointingHead serial=274930 11:07:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:07:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:07:24 Point started: ret=0 11:07:24 point_skyscan result=0 11:07:25 Check angles 11:07:25 SkyScan query 11:07:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 11:07:25 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 11:07:25 Check angles 11:07:25 SkyScan query 11:07:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 11:07:26 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 11:07:26 Check angles 11:07:26 SkyScan query 11:07:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 11:07:27 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 11:07:27 Check angles 11:07:27 SkyScan query 11:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.91<-17794 Statuses=0008 0009 11:07:28 Msec=2250 True Az=112.995 Ze=-86.91 Az status=0008 Ze status=0009 11:07:28 Check angles 11:07:28 SkyScan query 11:07:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 11:07:28 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 11:07:28 Check angles 11:07:28 SkyScan query 11:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.805<-20587 Statuses=0008 0009 11:07:29 Msec=3750 True Az=112.995 Ze=-128.805 Az status=0008 Ze status=0009 11:07:29 Check angles 11:07:29 SkyScan query 11:07:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.21<-22014 Statuses=0008 0009 11:07:30 Msec=4500 True Az=112.995 Ze=-150.21 Az status=0008 Ze status=0009 11:07:30 Check angles 11:07:30 SkyScan query 11:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 11:07:31 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 11:07:31 Check angles 11:07:31 SkyScan query 11:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:07:31 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:07:31 Message to Master queued w/err=0: serial=274930 error=0 11:07:36 Received message from Master: op=Filter serial=274931 11:07:36 Color wheel filter change from 0 to 0 11:07:36 FLIGetFilterPos err=0 currentPosition=0 11:07:36 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:36 Filter is already there-color wheel unchanged 11:07:36 Received message from Master: op=Shutter serial=274932 11:07:36 Shutter LASER open 11:07:37 Received message from Camera: op=State serial=274934 11:07:37 GetSingleValue result=40 Value=cccccccc 11:07:37 SkyScan query 11:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:07:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:37 Parameters OK 11:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:37 Set A/D data flow result=40 11:07:37 Set A/D channel type result=40 11:07:37 Set A/D encoding result=40 11:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:37 Set channel filter=0.000000e+000 result=40 11:07:37 Config A/D Result=40 11:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:37 Get A/D filter: -9.255963e+061 result=40 11:07:37 Get A/D value=-858993460 result=40 11:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:37 Parameters OK 11:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:37 Set A/D data flow result=40 11:07:37 Set A/D channel type result=40 11:07:37 Set A/D encoding result=40 11:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:37 Set channel filter=0.000000e+000 result=40 11:07:37 Config A/D Result=40 11:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:37 Get A/D filter: -9.255963e+061 result=40 11:07:37 Get A/D value=-858993460 result=40 11:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:37 Aux= 11:07:37 Message to Camera, serial 274934 queued 11:07:46 Received message from Master: op=Shutter serial=274944 11:07:46 Shutter LASER close 11:07:46 Received message from Master: op=PointingHead serial=274948 11:07:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:07:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:07:46 Point started: ret=0 11:07:46 point_skyscan result=0 11:07:47 Check angles 11:07:47 SkyScan query 11:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.995<-21533 Statuses=0008 0009 11:07:48 Msec=0 True Az=112.995 Ze=-142.995 Az status=0008 Ze status=0009 11:07:48 Check angles 11:07:48 SkyScan query 11:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.01<-20134 Statuses=0008 0009 11:07:49 Msec=750 True Az=112.995 Ze=-122.01 Az status=0008 Ze status=0009 11:07:49 Check angles 11:07:49 SkyScan query 11:07:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.115<-18741 Statuses=0008 0009 11:07:49 Msec=1500 True Az=112.995 Ze=-101.115 Az status=0008 Ze status=0009 11:07:49 Check angles 11:07:49 SkyScan query 11:07:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 11:07:50 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 11:07:50 Check angles 11:07:50 SkyScan query 11:07:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 11:07:51 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 11:07:51 Check angles 11:07:51 SkyScan query 11:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 11:07:52 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 11:07:52 Check angles 11:07:52 SkyScan query 11:07:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 11:07:52 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 11:07:52 Check angles 11:07:52 SkyScan query 11:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 11:07:53 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 11:07:53 Check angles 11:07:53 SkyScan query 11:07:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:07:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:07:54 Message to Master queued w/err=0: serial=274948 error=0 11:07:59 Received message from Master: op=Filter serial=274949 11:07:59 Color wheel filter change from 0 to 0 11:07:59 FLIGetFilterPos err=0 currentPosition=0 11:07:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:59 Filter is already there-color wheel unchanged 11:07:59 Received message from Master: op=Shutter serial=274950 11:07:59 Shutter LASER close 11:07:59 Received message from Camera: op=State serial=274952 11:07:59 GetSingleValue result=40 Value=cccccccc 11:07:59 SkyScan query 11:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:00 Parameters OK 11:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:00 Set A/D data flow result=40 11:08:00 Set A/D channel type result=40 11:08:00 Set A/D encoding result=40 11:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:00 Set channel filter=0.000000e+000 result=40 11:08:00 Config A/D Result=40 11:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:00 Get A/D filter: -9.255963e+061 result=40 11:08:00 Get A/D value=-858993460 result=40 11:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:00 Parameters OK 11:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:00 Set A/D data flow result=40 11:08:00 Set A/D channel type result=40 11:08:00 Set A/D encoding result=40 11:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:00 Set channel filter=0.000000e+000 result=40 11:08:00 Config A/D Result=40 11:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:00 Get A/D filter: -9.255963e+061 result=40 11:08:00 Get A/D value=-858993460 result=40 11:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:00 Aux= 11:08:00 Message to Camera, serial 274952 queued 11:08:37 Received message from Master: op=PointingHead serial=274965 11:08:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:08:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:08:37 Point started: ret=0 11:08:37 point_skyscan result=0 11:08:38 Check angles 11:08:38 SkyScan query 11:08:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:08:38 Message to Master queued w/err=0: serial=274965 error=0 11:08:43 Received message from Master: op=Filter serial=274966 11:08:43 Color wheel filter change from 0 to 0 11:08:43 FLIGetFilterPos err=0 currentPosition=0 11:08:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:43 Filter is already there-color wheel unchanged 11:08:43 Received message from Master: op=Shutter serial=274967 11:08:43 Shutter LASER close 11:08:43 Received message from Camera: op=State serial=274969 11:08:43 GetSingleValue result=40 Value=cccccccc 11:08:43 SkyScan query 11:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:08:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:44 Parameters OK 11:08:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:44 Set A/D data flow result=40 11:08:44 Set A/D channel type result=40 11:08:44 Set A/D encoding result=40 11:08:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:44 Set channel filter=0.000000e+000 result=40 11:08:44 Config A/D Result=40 11:08:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:44 Get A/D filter: -9.255963e+061 result=40 11:08:44 Get A/D value=-858993460 result=40 11:08:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:44 Parameters OK 11:08:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:44 Set A/D data flow result=40 11:08:44 Set A/D channel type result=40 11:08:44 Set A/D encoding result=40 11:08:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:44 Set channel filter=0.000000e+000 result=40 11:08:44 Config A/D Result=40 11:08:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:44 Get A/D filter: -9.255963e+061 result=40 11:08:44 Get A/D value=-858993460 result=40 11:08:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:44 Aux= 11:08:44 Message to Camera, serial 274969 queued 11:09:21 Received message from Master: op=PointingHead serial=274982 11:09:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:09:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:09:21 Point started: ret=0 11:09:21 point_skyscan result=0 11:09:22 Check angles 11:09:22 SkyScan query 11:09:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:09:23 Message to Master queued w/err=0: serial=274982 error=0 11:09:28 Received message from Master: op=Filter serial=274983 11:09:28 Color wheel filter change from 0 to 0 11:09:28 FLIGetFilterPos err=0 currentPosition=0 11:09:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:28 Filter is already there-color wheel unchanged 11:09:28 Received message from Master: op=Shutter serial=274984 11:09:28 Shutter LASER close 11:09:28 Received message from Camera: op=State serial=274986 11:09:28 GetSingleValue result=40 Value=cccccccc 11:09:28 SkyScan query 11:09:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:09:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:28 Parameters OK 11:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:28 Set A/D data flow result=40 11:09:28 Set A/D channel type result=40 11:09:28 Set A/D encoding result=40 11:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:28 Set channel filter=0.000000e+000 result=40 11:09:28 Config A/D Result=40 11:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:28 Get A/D filter: -9.255963e+061 result=40 11:09:28 Get A/D value=-858993460 result=40 11:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:28 Parameters OK 11:09:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:28 Set A/D data flow result=40 11:09:28 Set A/D channel type result=40 11:09:28 Set A/D encoding result=40 11:09:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:28 Set channel filter=0.000000e+000 result=40 11:09:28 Config A/D Result=40 11:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:28 Get A/D filter: -9.255963e+061 result=40 11:09:28 Get A/D value=-858993460 result=40 11:09:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:28 Aux= 11:09:28 Message to Camera, serial 274986 queued 11:10:05 Received message from Master: op=PointingHead serial=274999 11:10:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:10:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:10:05 Point started: ret=0 11:10:05 point_skyscan result=0 11:10:06 Check angles 11:10:06 SkyScan query 11:10:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:10:07 Message to Master queued w/err=0: serial=274999 error=0 11:10:12 Received message from Master: op=Filter serial=275000 11:10:12 Color wheel filter change from 0 to 0 11:10:12 FLIGetFilterPos err=0 currentPosition=0 11:10:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:12 Filter is already there-color wheel unchanged 11:10:12 Received message from Master: op=Shutter serial=275001 11:10:12 Shutter LASER close 11:10:12 Received message from Camera: op=State serial=275003 11:10:12 GetSingleValue result=40 Value=cccccccc 11:10:12 SkyScan query 11:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:10:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:13 Parameters OK 11:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:13 Set A/D data flow result=40 11:10:13 Set A/D channel type result=40 11:10:13 Set A/D encoding result=40 11:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:13 Set channel filter=0.000000e+000 result=40 11:10:13 Config A/D Result=40 11:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:13 Get A/D filter: -9.255963e+061 result=40 11:10:13 Get A/D value=-858993460 result=40 11:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:13 Parameters OK 11:10:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:13 Set A/D data flow result=40 11:10:13 Set A/D channel type result=40 11:10:13 Set A/D encoding result=40 11:10:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:13 Set channel filter=0.000000e+000 result=40 11:10:13 Config A/D Result=40 11:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:13 Get A/D filter: -9.255963e+061 result=40 11:10:13 Get A/D value=-858993460 result=40 11:10:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:13 Aux= 11:10:13 Message to Camera, serial 275003 queued 11:10:49 Received message from Master: op=PointingHead serial=275016 11:10:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:10:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:10:50 Point started: ret=0 11:10:50 point_skyscan result=0 11:10:51 Check angles 11:10:51 SkyScan query 11:10:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 11:10:51 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 11:10:51 Check angles 11:10:51 SkyScan query 11:10:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 11:10:52 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 11:10:52 Check angles 11:10:52 SkyScan query 11:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.355<-16357 Statuses=0008 0009 11:10:53 Msec=1500 True Az=112.995 Ze=-65.355 Az status=0008 Ze status=0009 11:10:53 Check angles 11:10:53 SkyScan query 11:10:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 11:10:53 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 11:10:54 Check angles 11:10:54 SkyScan query 11:10:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 11:10:54 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 11:10:54 Check angles 11:10:54 SkyScan query 11:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.22<-20548 Statuses=0008 0009 11:10:55 Msec=3750 True Az=112.995 Ze=-128.22 Az status=0008 Ze status=0009 11:10:55 Check angles 11:10:55 SkyScan query 11:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.19<-21946 Statuses=0008 0009 11:10:56 Msec=4500 True Az=112.995 Ze=-149.19 Az status=0008 Ze status=0009 11:10:56 Check angles 11:10:56 SkyScan query 11:10:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.13<-23342 Statuses=0008 0009 11:10:56 Msec=5250 True Az=112.995 Ze=-170.13 Az status=0008 Ze status=0009 11:10:57 Check angles 11:10:57 SkyScan query 11:10:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:10:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:10:57 Message to Master queued w/err=0: serial=275016 error=0 11:11:02 Received message from Master: op=Filter serial=275017 11:11:02 Color wheel filter change from 0 to 0 11:11:02 FLIGetFilterPos err=0 currentPosition=0 11:11:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:02 Filter is already there-color wheel unchanged 11:11:02 Received message from Master: op=Shutter serial=275018 11:11:02 Shutter LASER open 11:11:02 Received message from Camera: op=State serial=275020 11:11:02 GetSingleValue result=40 Value=cccccccc 11:11:02 SkyScan query 11:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:11:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:03 Parameters OK 11:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:03 Set A/D data flow result=40 11:11:03 Set A/D channel type result=40 11:11:03 Set A/D encoding result=40 11:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:03 Set channel filter=0.000000e+000 result=40 11:11:03 Config A/D Result=40 11:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:03 Get A/D filter: -9.255963e+061 result=40 11:11:03 Get A/D value=-858993460 result=40 11:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:03 Parameters OK 11:11:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:03 Set A/D data flow result=40 11:11:03 Set A/D channel type result=40 11:11:03 Set A/D encoding result=40 11:11:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:03 Set channel filter=0.000000e+000 result=40 11:11:03 Config A/D Result=40 11:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:03 Get A/D filter: -9.255963e+061 result=40 11:11:03 Get A/D value=-858993460 result=40 11:11:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:03 Aux= 11:11:03 Message to Camera, serial 275020 queued 11:11:11 Received message from Master: op=Shutter serial=275030 11:11:11 Shutter LASER close 11:11:12 Received message from Master: op=PointingHead serial=275034 11:11:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:11:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:11:13 Point started: ret=0 11:11:13 point_skyscan result=0 11:11:13 Check angles 11:11:13 SkyScan query 11:11:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 11:11:14 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 11:11:14 Check angles 11:11:14 SkyScan query 11:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 11:11:15 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 11:11:15 Check angles 11:11:15 SkyScan query 11:11:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 11:11:15 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 11:11:16 Check angles 11:11:16 SkyScan query 11:11:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 11:11:16 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 11:11:16 Check angles 11:11:16 SkyScan query 11:11:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.01<-15934 Statuses=0008 0009 11:11:17 Msec=3000 True Az=112.995 Ze=-59.01 Az status=0008 Ze status=0009 11:11:17 Check angles 11:11:17 SkyScan query 11:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.995<-14533 Statuses=0008 0009 11:11:18 Msec=3750 True Az=112.995 Ze=-37.995 Az status=0008 Ze status=0009 11:11:18 Check angles 11:11:18 SkyScan query 11:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 11:11:18 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 11:11:19 Check angles 11:11:19 SkyScan query 11:11:19 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 11:11:19 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 11:11:19 Check angles 11:11:19 SkyScan query 11:11:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:11:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:11:20 Message to Master queued w/err=0: serial=275034 error=0 11:11:25 Received message from Master: op=Filter serial=275035 11:11:25 Color wheel filter change from 0 to 0 11:11:25 FLIGetFilterPos err=0 currentPosition=0 11:11:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:25 Filter is already there-color wheel unchanged 11:11:25 Received message from Master: op=Shutter serial=275036 11:11:25 Shutter LASER close 11:11:25 Received message from Camera: op=State serial=275038 11:11:25 GetSingleValue result=40 Value=cccccccc 11:11:25 SkyScan query 11:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:11:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:26 Parameters OK 11:11:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:26 Set A/D data flow result=40 11:11:26 Set A/D channel type result=40 11:11:26 Set A/D encoding result=40 11:11:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:26 Set channel filter=0.000000e+000 result=40 11:11:26 Config A/D Result=40 11:11:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:26 Get A/D filter: -9.255963e+061 result=40 11:11:26 Get A/D value=-858993460 result=40 11:11:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:26 Parameters OK 11:11:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:26 Set A/D data flow result=40 11:11:26 Set A/D channel type result=40 11:11:26 Set A/D encoding result=40 11:11:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:26 Set channel filter=0.000000e+000 result=40 11:11:26 Config A/D Result=40 11:11:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:26 Get A/D filter: -9.255963e+061 result=40 11:11:26 Get A/D value=-858993460 result=40 11:11:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:26 Aux= 11:11:26 Message to Camera, serial 275038 queued 11:12:03 Received message from Master: op=PointingHead serial=275051 11:12:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:12:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:12:03 Point started: ret=0 11:12:03 point_skyscan result=0 11:12:04 Check angles 11:12:04 SkyScan query 11:12:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:12:04 Message to Master queued w/err=0: serial=275051 error=0 11:12:09 Received message from Master: op=Filter serial=275052 11:12:09 Color wheel filter change from 0 to 0 11:12:09 FLIGetFilterPos err=0 currentPosition=0 11:12:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:09 Filter is already there-color wheel unchanged 11:12:09 Received message from Master: op=Shutter serial=275053 11:12:09 Shutter LASER close 11:12:09 Received message from Camera: op=State serial=275055 11:12:09 GetSingleValue result=40 Value=cccccccc 11:12:09 SkyScan query 11:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:10 Parameters OK 11:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:10 Set A/D data flow result=40 11:12:10 Set A/D channel type result=40 11:12:10 Set A/D encoding result=40 11:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:10 Set channel filter=0.000000e+000 result=40 11:12:10 Config A/D Result=40 11:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:10 Get A/D filter: -9.255963e+061 result=40 11:12:10 Get A/D value=-858993460 result=40 11:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:10 Parameters OK 11:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:10 Set A/D data flow result=40 11:12:10 Set A/D channel type result=40 11:12:10 Set A/D encoding result=40 11:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:10 Set channel filter=0.000000e+000 result=40 11:12:10 Config A/D Result=40 11:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:10 Get A/D filter: -9.255963e+061 result=40 11:12:10 Get A/D value=-858993460 result=40 11:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:10 Aux= 11:12:10 Message to Camera, serial 275055 queued 11:12:47 Received message from Master: op=PointingHead serial=275068 11:12:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:12:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:12:47 Point started: ret=0 11:12:47 point_skyscan result=0 11:12:48 Check angles 11:12:48 SkyScan query 11:12:49 SkyScan query done: ret=0 az=135.96<-9064 ze=-6.51<-12434 Statuses=0009 0008 11:12:49 Msec=0 True Az=135.96 Ze=-6.51 Az status=0009 Ze status=0008 11:12:49 Check angles 11:12:49 SkyScan query 11:12:49 SkyScan query done: ret=0 az=153.45<-10230 ze=-6.495<-12433 Statuses=0009 0008 11:12:49 Msec=750 True Az=153.45 Ze=-6.495 Az status=0009 Ze status=0008 11:12:49 Check angles 11:12:49 SkyScan query 11:12:50 SkyScan query done: ret=0 az=170.85<-11390 ze=-6.495<-12433 Statuses=0009 0008 11:12:50 Msec=1500 True Az=170.85 Ze=-6.495 Az status=0009 Ze status=0008 11:12:50 Check angles 11:12:50 SkyScan query 11:12:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:12:51 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:12:51 Message to Master queued w/err=0: serial=275068 error=0 11:12:56 Received message from Master: op=Filter serial=275069 11:12:56 Color wheel filter change from 0 to 0 11:12:56 FLIGetFilterPos err=0 currentPosition=0 11:12:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:56 Filter is already there-color wheel unchanged 11:12:56 Received message from Master: op=Shutter serial=275070 11:12:56 Shutter LASER close 11:12:56 Received message from Camera: op=State serial=275072 11:12:56 GetSingleValue result=40 Value=cccccccc 11:12:56 SkyScan query 11:12:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:12:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:57 Parameters OK 11:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:57 Set A/D data flow result=40 11:12:57 Set A/D channel type result=40 11:12:57 Set A/D encoding result=40 11:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:57 Set channel filter=0.000000e+000 result=40 11:12:57 Config A/D Result=40 11:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:57 Get A/D filter: -9.255963e+061 result=40 11:12:57 Get A/D value=-858993460 result=40 11:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:57 Parameters OK 11:12:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:57 Set A/D data flow result=40 11:12:57 Set A/D channel type result=40 11:12:57 Set A/D encoding result=40 11:12:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:57 Set channel filter=0.000000e+000 result=40 11:12:57 Config A/D Result=40 11:12:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:57 Get A/D filter: -9.255963e+061 result=40 11:12:57 Get A/D value=-858993460 result=40 11:12:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:57 Aux= 11:12:57 Message to Camera, serial 275072 queued 11:13:33 Received message from Master: op=PointingHead serial=275085 11:13:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:13:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:13:34 Point started: ret=0 11:13:34 point_skyscan result=0 11:13:35 Check angles 11:13:35 SkyScan query 11:13:35 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 11:13:35 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 11:13:35 Check angles 11:13:35 SkyScan query 11:13:36 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 11:13:36 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 11:13:36 Check angles 11:13:36 SkyScan query 11:13:37 SkyScan query done: ret=0 az=117.69<-7846 ze=6.495<-11567 Statuses=0009 0008 11:13:37 Msec=1500 True Az=117.69 Ze=6.495 Az status=0009 Ze status=0008 11:13:37 Check angles 11:13:37 SkyScan query 11:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:13:37 Message to Master queued w/err=0: serial=275085 error=0 11:13:42 Received message from Master: op=Filter serial=275086 11:13:42 Color wheel filter change from 0 to 0 11:13:42 FLIGetFilterPos err=0 currentPosition=0 11:13:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:42 Filter is already there-color wheel unchanged 11:13:43 Received message from Master: op=Shutter serial=275087 11:13:43 Shutter LASER close 11:13:43 Received message from Camera: op=State serial=275089 11:13:43 GetSingleValue result=40 Value=cccccccc 11:13:43 SkyScan query 11:13:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:13:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:43 Parameters OK 11:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:43 Set A/D data flow result=40 11:13:43 Set A/D channel type result=40 11:13:43 Set A/D encoding result=40 11:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:43 Set channel filter=0.000000e+000 result=40 11:13:43 Config A/D Result=40 11:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:43 Get A/D filter: -9.255963e+061 result=40 11:13:43 Get A/D value=-858993460 result=40 11:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:43 Parameters OK 11:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:43 Set A/D data flow result=40 11:13:43 Set A/D channel type result=40 [UTC 2019-3-14 11:13:43] 11:13:43 Set A/D encoding result=40 11:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:43 Set channel filter=0.000000e+000 result=40 11:13:43 Config A/D Result=40 11:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:43 Get A/D filter: -9.255963e+061 result=40 11:13:43 Get A/D value=-858993460 result=40 11:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:43 Aux= 11:13:43 Message to Camera, serial 275089 queued 11:14:20 Received message from Master: op=PointingHead serial=275102 11:14:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:20 Point started: ret=0 11:14:20 point_skyscan result=0 11:14:21 Check angles 11:14:21 SkyScan query 11:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.07<-13538 Statuses=0008 0009 11:14:22 Msec=0 True Az=112.995 Ze=-23.07 Az status=0008 Ze status=0009 11:14:22 Check angles 11:14:22 SkyScan query 11:14:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 11:14:22 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 11:14:23 Check angles 11:14:23 SkyScan query 11:14:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 11:14:23 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 11:14:23 Check angles 11:14:23 SkyScan query 11:14:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.325<-17755 Statuses=0008 0009 11:14:24 Msec=2250 True Az=112.995 Ze=-86.325 Az status=0008 Ze status=0009 11:14:24 Check angles 11:14:24 SkyScan query 11:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 11:14:25 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 11:14:25 Check angles 11:14:25 SkyScan query 11:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.235<-20549 Statuses=0008 0009 11:14:25 Msec=3750 True Az=112.995 Ze=-128.235 Az status=0008 Ze status=0009 11:14:26 Check angles 11:14:26 SkyScan query 11:14:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.235<-21949 Statuses=0008 0009 11:14:26 Msec=4500 True Az=112.995 Ze=-149.235 Az status=0008 Ze status=0009 11:14:26 Check angles 11:14:26 SkyScan query 11:14:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.175<-23345 Statuses=0008 0009 11:14:27 Msec=5250 True Az=112.995 Ze=-170.175 Az status=0008 Ze status=0009 11:14:27 Check angles 11:14:27 SkyScan query 11:14:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:14:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:14:28 Message to Master queued w/err=0: serial=275102 error=0 11:14:33 Received message from Master: op=Filter serial=275103 11:14:33 Color wheel filter change from 0 to 0 11:14:33 FLIGetFilterPos err=0 currentPosition=0 11:14:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:33 Filter is already there-color wheel unchanged 11:14:33 Received message from Master: op=Shutter serial=275104 11:14:33 Shutter LASER open 11:14:33 Received message from Camera: op=State serial=275106 11:14:33 GetSingleValue result=40 Value=cccccccc 11:14:33 SkyScan query 11:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:14:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:34 Parameters OK 11:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:34 Set A/D data flow result=40 11:14:34 Set A/D channel type result=40 11:14:34 Set A/D encoding result=40 11:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:34 Set channel filter=0.000000e+000 result=40 11:14:34 Config A/D Result=40 11:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:34 Get A/D filter: -9.255963e+061 result=40 11:14:34 Get A/D value=-858993460 result=40 11:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:34 Parameters OK 11:14:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:34 Set A/D data flow result=40 11:14:34 Set A/D channel type result=40 11:14:34 Set A/D encoding result=40 11:14:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:34 Set channel filter=0.000000e+000 result=40 11:14:34 Config A/D Result=40 11:14:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:34 Get A/D filter: -9.255963e+061 result=40 11:14:34 Get A/D value=-858993460 result=40 11:14:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:34 Aux= 11:14:34 Message to Camera, serial 275106 queued 11:14:42 Received message from Master: op=Shutter serial=275116 11:14:42 Shutter LASER close 11:14:43 Received message from Master: op=PointingHead serial=275120 11:14:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:14:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:14:43 Point started: ret=0 11:14:43 point_skyscan result=0 11:14:44 Check angles 11:14:44 SkyScan query 11:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.07<-21538 Statuses=0008 0009 11:14:44 Msec=0 True Az=112.995 Ze=-143.07 Az status=0008 Ze status=0009 11:14:44 Check angles 11:14:44 SkyScan query 11:14:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.1<-20140 Statuses=0008 0009 11:14:45 Msec=750 True Az=112.995 Ze=-122.1 Az status=0008 Ze status=0009 11:14:45 Check angles 11:14:45 SkyScan query 11:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 11:14:46 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 11:14:46 Check angles 11:14:46 SkyScan query 11:14:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.725<-17315 Statuses=0008 0009 11:14:46 Msec=2250 True Az=112.995 Ze=-79.725 Az status=0008 Ze status=0009 11:14:47 Check angles 11:14:47 SkyScan query 11:14:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.785<-15919 Statuses=0008 0009 11:14:47 Msec=3000 True Az=112.995 Ze=-58.785 Az status=0008 Ze status=0009 11:14:47 Check angles 11:14:47 SkyScan query 11:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.8<-14520 Statuses=0008 0009 11:14:48 Msec=3750 True Az=112.995 Ze=-37.8 Az status=0008 Ze status=0009 11:14:48 Check angles 11:14:48 SkyScan query 11:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.845<-13123 Statuses=0008 0009 11:14:49 Msec=4500 True Az=112.995 Ze=-16.845 Az status=0008 Ze status=0009 11:14:49 Check angles 11:14:49 SkyScan query 11:14:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.08<-11728 Statuses=0008 0009 11:14:49 Msec=5250 True Az=112.995 Ze=4.08 Az status=0008 Ze status=0009 11:14:50 Check angles 11:14:50 SkyScan query 11:14:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:14:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:14:50 Message to Master queued w/err=0: serial=275120 error=0 11:14:55 Received message from Master: op=Filter serial=275121 11:14:55 Color wheel filter change from 0 to 0 11:14:55 FLIGetFilterPos err=0 currentPosition=0 11:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:55 Filter is already there-color wheel unchanged 11:14:55 Received message from Master: op=Shutter serial=275122 11:14:55 Shutter LASER close 11:14:56 Received message from Camera: op=State serial=275124 11:14:56 GetSingleValue result=40 Value=cccccccc 11:14:56 SkyScan query 11:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:56 Parameters OK 11:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:56 Set A/D data flow result=40 11:14:56 Set A/D channel type result=40 11:14:56 Set A/D encoding result=40 11:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:56 Set channel filter=0.000000e+000 result=40 11:14:56 Config A/D Result=40 11:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:56 Get A/D filter: -9.255963e+061 result=40 11:14:56 Get A/D value=-858993460 result=40 11:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:56 Parameters OK 11:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:56 Set A/D data flow result=40 11:14:56 Set A/D channel type result=40 11:14:56 Set A/D encoding result=40 11:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:56 Set channel filter=0.000000e+000 result=40 11:14:56 Config A/D Result=40 11:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:56 Get A/D filter: -9.255963e+061 result=40 11:14:56 Get A/D value=-858993460 result=40 11:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:56 Aux= 11:14:56 Message to Camera, serial 275124 queued 11:15:33 Received message from Master: op=PointingHead serial=275137 11:15:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:15:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:15:33 Point started: ret=0 11:15:33 point_skyscan result=0 11:15:34 Check angles 11:15:34 SkyScan query 11:15:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:15:35 Message to Master queued w/err=0: serial=275137 error=0 11:15:40 Received message from Master: op=Filter serial=275138 11:15:40 Color wheel filter change from 0 to 0 11:15:40 FLIGetFilterPos err=0 currentPosition=0 11:15:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:40 Filter is already there-color wheel unchanged 11:15:40 Received message from Master: op=Shutter serial=275139 11:15:40 Shutter LASER close 11:15:40 Received message from Camera: op=State serial=275141 11:15:40 GetSingleValue result=40 Value=cccccccc 11:15:40 SkyScan query 11:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:15:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:40 Parameters OK 11:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:40 Set A/D data flow result=40 11:15:40 Set A/D channel type result=40 11:15:40 Set A/D encoding result=40 11:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:40 Set channel filter=0.000000e+000 result=40 11:15:40 Config A/D Result=40 11:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:40 Get A/D filter: -9.255963e+061 result=40 11:15:40 Get A/D value=-858993460 result=40 11:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:40 Parameters OK 11:15:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:40 Set A/D data flow result=40 11:15:40 Set A/D channel type result=40 11:15:40 Set A/D encoding result=40 11:15:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:40 Set channel filter=0.000000e+000 result=40 11:15:40 Config A/D Result=40 11:15:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:40 Get A/D filter: -9.255963e+061 result=40 11:15:40 Get A/D value=-858993460 result=40 11:15:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:40 Aux= 11:15:40 Message to Camera, serial 275141 queued 11:16:17 Received message from Master: op=PointingHead serial=275154 11:16:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:16:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:16:18 Point started: ret=0 11:16:18 point_skyscan result=0 11:16:18 Check angles 11:16:18 SkyScan query 11:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:16:19 Message to Master queued w/err=0: serial=275154 error=0 11:16:24 Received message from Master: op=Filter serial=275155 11:16:24 Color wheel filter change from 0 to 0 11:16:24 FLIGetFilterPos err=0 currentPosition=0 11:16:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:24 Filter is already there-color wheel unchanged 11:16:24 Received message from Master: op=Shutter serial=275156 11:16:24 Shutter LASER close 11:16:24 Received message from Camera: op=State serial=275158 11:16:24 GetSingleValue result=40 Value=cccccccc 11:16:24 SkyScan query 11:16:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:16:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:25 Parameters OK 11:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:25 Set A/D data flow result=40 11:16:25 Set A/D channel type result=40 11:16:25 Set A/D encoding result=40 11:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:25 Set channel filter=0.000000e+000 result=40 11:16:25 Config A/D Result=40 11:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:25 Get A/D filter: -9.255963e+061 result=40 11:16:25 Get A/D value=-858993460 result=40 11:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:25 Parameters OK 11:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:25 Set A/D data flow result=40 11:16:25 Set A/D channel type result=40 11:16:25 Set A/D encoding result=40 11:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:25 Set channel filter=0.000000e+000 result=40 11:16:25 Config A/D Result=40 11:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:25 Get A/D filter: -9.255963e+061 result=40 11:16:25 Get A/D value=-858993460 result=40 11:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:25 Aux= 11:16:25 Message to Camera, serial 275158 queued 11:17:02 Received message from Master: op=PointingHead serial=275171 11:17:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:17:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:17:02 Point started: ret=0 11:17:02 point_skyscan result=0 11:17:03 Check angles 11:17:03 SkyScan query 11:17:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:17:03 Message to Master queued w/err=0: serial=275171 error=0 11:17:08 Received message from Master: op=Filter serial=275172 11:17:08 Color wheel filter change from 0 to 0 11:17:08 FLIGetFilterPos err=0 currentPosition=0 11:17:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:08 Filter is already there-color wheel unchanged 11:17:08 Received message from Master: op=Shutter serial=275173 11:17:08 Shutter LASER close 11:17:09 Received message from Camera: op=State serial=275175 11:17:09 GetSingleValue result=40 Value=cccccccc 11:17:09 SkyScan query 11:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:17:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:09 Parameters OK 11:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:09 Set A/D data flow result=40 11:17:09 Set A/D channel type result=40 11:17:09 Set A/D encoding result=40 11:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:09 Set channel filter=0.000000e+000 result=40 11:17:09 Config A/D Result=40 11:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:09 Get A/D filter: -9.255963e+061 result=40 11:17:09 Get A/D value=-858993460 result=40 11:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:09 Parameters OK 11:17:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:09 Set A/D data flow result=40 11:17:09 Set A/D channel type result=40 11:17:09 Set A/D encoding result=40 11:17:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:09 Set channel filter=0.000000e+000 result=40 11:17:09 Config A/D Result=40 11:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:09 Get A/D filter: -9.255963e+061 result=40 11:17:09 Get A/D value=-858993460 result=40 11:17:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:09 Aux= 11:17:09 Message to Camera, serial 275175 queued 11:17:46 Received message from Master: op=PointingHead serial=275188 11:17:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:17:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:17:46 Point started: ret=0 11:17:46 point_skyscan result=0 11:17:47 Check angles 11:17:47 SkyScan query 11:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.76<-13584 Statuses=0008 0009 11:17:48 Msec=0 True Az=112.995 Ze=-23.76 Az status=0008 Ze status=0009 11:17:48 Check angles 11:17:48 SkyScan query 11:17:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.12<-15008 Statuses=0008 0009 11:17:48 Msec=750 True Az=112.995 Ze=-45.12 Az status=0008 Ze status=0009 11:17:49 Check angles 11:17:49 SkyScan query 11:17:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.105<-16407 Statuses=0008 0009 11:17:49 Msec=1500 True Az=112.995 Ze=-66.105 Az status=0008 Ze status=0009 11:17:49 Check angles 11:17:49 SkyScan query 11:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.075<-17805 Statuses=0008 0009 11:17:50 Msec=2250 True Az=112.995 Ze=-87.075 Az status=0008 Ze status=0009 11:17:50 Check angles 11:17:50 SkyScan query 11:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.03<-19202 Statuses=0008 0009 11:17:51 Msec=3000 True Az=112.995 Ze=-108.03 Az status=0008 Ze status=0009 11:17:51 Check angles 11:17:51 SkyScan query 11:17:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 11:17:51 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 11:17:52 Check angles 11:17:52 SkyScan query 11:17:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.94<-21996 Statuses=0008 0009 11:17:52 Msec=4500 True Az=112.995 Ze=-149.94 Az status=0008 Ze status=0009 11:17:52 Check angles 11:17:52 SkyScan query 11:17:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 11:17:53 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 11:17:53 Check angles 11:17:53 SkyScan query 11:17:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:17:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:17:54 Message to Master queued w/err=0: serial=275188 error=0 11:17:59 Received message from Master: op=Filter serial=275189 11:17:59 Color wheel filter change from 0 to 0 11:17:59 FLIGetFilterPos err=0 currentPosition=0 11:17:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:59 Filter is already there-color wheel unchanged 11:17:59 Received message from Master: op=Shutter serial=275190 11:17:59 Shutter LASER open 11:17:59 Received message from Camera: op=State serial=275192 11:17:59 GetSingleValue result=40 Value=cccccccc 11:17:59 SkyScan query 11:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:00 Parameters OK 11:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:00 Set A/D data flow result=40 11:18:00 Set A/D channel type result=40 11:18:00 Set A/D encoding result=40 11:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:00 Set channel filter=0.000000e+000 result=40 11:18:00 Config A/D Result=40 11:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:00 Get A/D filter: -9.255963e+061 result=40 11:18:00 Get A/D value=-858993460 result=40 11:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:00 Parameters OK 11:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:00 Set A/D data flow result=40 11:18:00 Set A/D channel type result=40 11:18:00 Set A/D encoding result=40 11:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:00 Set channel filter=0.000000e+000 result=40 11:18:00 Config A/D Result=40 11:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:00 Get A/D filter: -9.255963e+061 result=40 11:18:00 Get A/D value=-858993460 result=40 11:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:00 Aux= 11:18:00 Message to Camera, serial 275192 queued 11:18:08 Received message from Master: op=Shutter serial=275202 11:18:08 Shutter LASER close 11:18:09 Received message from Master: op=PointingHead serial=275206 11:18:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:18:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:18:09 Point started: ret=0 11:18:09 point_skyscan result=0 11:18:10 Check angles 11:18:10 SkyScan query 11:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 11:18:10 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 11:18:10 Check angles 11:18:10 SkyScan query 11:18:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 11:18:11 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 11:18:11 Check angles 11:18:11 SkyScan query 11:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.22<-18748 Statuses=0008 0009 11:18:12 Msec=1500 True Az=112.995 Ze=-101.22 Az status=0008 Ze status=0009 11:18:12 Check angles 11:18:12 SkyScan query 11:18:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.25<-17350 Statuses=0008 0009 11:18:12 Msec=2250 True Az=112.995 Ze=-80.25 Az status=0008 Ze status=0009 11:18:13 Check angles 11:18:13 SkyScan query 11:18:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.31<-15954 Statuses=0008 0009 11:18:13 Msec=3000 True Az=112.995 Ze=-59.31 Az status=0008 Ze status=0009 11:18:13 Check angles 11:18:13 SkyScan query 11:18:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.31<-14554 Statuses=0008 0009 11:18:14 Msec=3750 True Az=112.995 Ze=-38.31 Az status=0008 Ze status=0009 11:18:14 Check angles 11:18:14 SkyScan query 11:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.385<-13159 Statuses=0008 0009 11:18:15 Msec=4500 True Az=112.995 Ze=-17.385 Az status=0008 Ze status=0009 11:18:15 Check angles 11:18:15 SkyScan query 11:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=3.6<-11760 Statuses=0008 0009 11:18:15 Msec=5250 True Az=112.995 Ze=3.6 Az status=0008 Ze status=0009 11:18:16 Check angles 11:18:16 SkyScan query 11:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:18:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:18:16 Message to Master queued w/err=0: serial=275206 error=0 11:18:21 Received message from Master: op=Filter serial=275207 11:18:21 Color wheel filter change from 0 to 0 11:18:21 FLIGetFilterPos err=0 currentPosition=0 11:18:21 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:21 Filter is already there-color wheel unchanged 11:18:21 Received message from Master: op=Shutter serial=275208 11:18:21 Shutter LASER close 11:18:22 Received message from Camera: op=State serial=275210 11:18:22 GetSingleValue result=40 Value=cccccccc 11:18:22 SkyScan query 11:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:22 Parameters OK 11:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:22 Set A/D data flow result=40 11:18:22 Set A/D channel type result=40 11:18:22 Set A/D encoding result=40 11:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:22 Set channel filter=0.000000e+000 result=40 11:18:22 Config A/D Result=40 11:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:22 Get A/D filter: -9.255963e+061 result=40 11:18:22 Get A/D value=-858993460 result=40 11:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:22 Parameters OK 11:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:22 Set A/D data flow result=40 11:18:22 Set A/D channel type result=40 11:18:22 Set A/D encoding result=40 11:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:22 Set channel filter=0.000000e+000 result=40 11:18:22 Config A/D Result=40 11:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:22 Get A/D filter: -9.255963e+061 result=40 11:18:22 Get A/D value=-858993460 result=40 11:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:22 Aux= 11:18:22 Message to Camera, serial 275210 queued 11:18:59 Received message from Master: op=PointingHead serial=275223 11:18:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:18:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:18:59 Point started: ret=0 11:18:59 point_skyscan result=0 11:19:00 Check angles 11:19:00 SkyScan query 11:19:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:19:01 Message to Master queued w/err=0: serial=275223 error=0 11:19:06 Received message from Master: op=Filter serial=275224 11:19:06 Color wheel filter change from 0 to 0 11:19:06 FLIGetFilterPos err=0 currentPosition=0 11:19:06 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:06 Filter is already there-color wheel unchanged 11:19:06 Received message from Master: op=Shutter serial=275225 11:19:06 Shutter LASER close 11:19:06 Received message from Camera: op=State serial=275227 11:19:06 GetSingleValue result=40 Value=cccccccc 11:19:06 SkyScan query 11:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:19:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:06 Parameters OK 11:19:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:06 Set A/D data flow result=40 11:19:06 Set A/D channel type result=40 11:19:06 Set A/D encoding result=40 11:19:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:06 Set channel filter=0.000000e+000 result=40 11:19:06 Config A/D Result=40 11:19:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:06 Get A/D filter: -9.255963e+061 result=40 11:19:06 Get A/D value=-858993460 result=40 11:19:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:06 Parameters OK 11:19:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:06 Set A/D data flow result=40 11:19:06 Set A/D channel type result=40 11:19:06 Set A/D encoding result=40 11:19:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:06 Set channel filter=0.000000e+000 result=40 11:19:06 Config A/D Result=40 11:19:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:06 Get A/D filter: -9.255963e+061 result=40 11:19:06 Get A/D value=-858993460 result=40 11:19:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:06 Aux= 11:19:06 Message to Camera, serial 275227 queued 11:19:43 Received message from Master: op=PointingHead serial=275240 11:19:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:19:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:19:44 Point started: ret=0 11:19:44 point_skyscan result=0 11:19:44 Check angles 11:19:44 SkyScan query 11:19:45 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 11:19:45 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 11:19:45 Check angles 11:19:45 SkyScan query 11:19:46 SkyScan query done: ret=0 az=153.705<-10247 ze=-6.495<-12433 Statuses=0009 0008 11:19:46 Msec=750 True Az=153.705 Ze=-6.495 Az status=0009 Ze status=0008 11:19:46 Check angles 11:19:46 SkyScan query 11:19:46 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 11:19:46 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 11:19:47 Check angles 11:19:47 SkyScan query 11:19:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:19:47 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:19:47 Message to Master queued w/err=0: serial=275240 error=0 11:19:52 Received message from Master: op=Filter serial=275241 11:19:52 Color wheel filter change from 0 to 0 11:19:52 FLIGetFilterPos err=0 currentPosition=0 11:19:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:52 Filter is already there-color wheel unchanged 11:19:52 Received message from Master: op=Shutter serial=275242 11:19:52 Shutter LASER close 11:19:52 Received message from Camera: op=State serial=275244 11:19:52 GetSingleValue result=40 Value=cccccccc 11:19:52 SkyScan query 11:19:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:19:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:53 Parameters OK 11:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:53 Set A/D data flow result=40 11:19:53 Set A/D channel type result=40 11:19:53 Set A/D encoding result=40 11:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:53 Set channel filter=0.000000e+000 result=40 11:19:53 Config A/D Result=40 11:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:53 Get A/D filter: -9.255963e+061 result=40 11:19:53 Get A/D value=-858993460 result=40 11:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:53 Parameters OK 11:19:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:53 Set A/D data flow result=40 11:19:53 Set A/D channel type result=40 11:19:53 Set A/D encoding result=40 11:19:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:53 Set channel filter=0.000000e+000 result=40 11:19:53 Config A/D Result=40 11:19:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:53 Get A/D filter: -9.255963e+061 result=40 11:19:53 Get A/D value=-858993460 result=40 11:19:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:53 Aux= 11:19:53 Message to Camera, serial 275244 queued 11:20:30 Received message from Master: op=PointingHead serial=275257 11:20:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:20:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:20:30 Point started: ret=0 11:20:30 point_skyscan result=0 11:20:31 Check angles 11:20:31 SkyScan query 11:20:32 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 11:20:32 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 11:20:32 Check angles 11:20:32 SkyScan query 11:20:32 SkyScan query done: ret=0 az=135.165<-9011 ze=6.495<-11567 Statuses=0009 0008 11:20:32 Msec=750 True Az=135.165 Ze=6.495 Az status=0009 Ze status=0008 11:20:32 Check angles 11:20:32 SkyScan query 11:20:33 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 11:20:33 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 11:20:33 Check angles 11:20:33 SkyScan query 11:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:34 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:20:34 Message to Master queued w/err=0: serial=275257 error=0 11:20:39 Received message from Master: op=Filter serial=275258 11:20:39 Color wheel filter change from 0 to 0 11:20:39 FLIGetFilterPos err=0 currentPosition=0 11:20:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:39 Filter is already there-color wheel unchanged 11:20:39 Received message from Master: op=Shutter serial=275259 11:20:39 Shutter LASER close 11:20:39 Received message from Camera: op=State serial=275261 11:20:39 GetSingleValue result=40 Value=cccccccc 11:20:39 SkyScan query 11:20:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:20:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:40 Parameters OK 11:20:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:40 Set A/D data flow result=40 11:20:40 Set A/D channel type result=40 11:20:40 Set A/D encoding result=40 11:20:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:40 Set channel filter=0.000000e+000 result=40 11:20:40 Config A/D Result=40 11:20:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:40 Get A/D filter: -9.255963e+061 result=40 11:20:40 Get A/D value=-858993460 result=40 11:20:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:40 Parameters OK 11:20:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:40 Set A/D data flow result=40 11:20:40 Set A/D channel type result=40 11:20:40 Set A/D encoding result=40 11:20:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:40 Set channel filter=0.000000e+000 result=40 11:20:40 Config A/D Result=40 11:20:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:40 Get A/D filter: -9.255963e+061 result=40 11:20:40 Get A/D value=-858993460 result=40 11:20:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:40 Aux= 11:20:40 Message to Camera, serial 275261 queued 11:21:16 Received message from Master: op=PointingHead serial=275273 11:21:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:21:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:21:16 Point started: ret=0 11:21:16 point_skyscan result=0 11:21:17 Check angles 11:21:17 SkyScan query 11:21:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 11:21:17 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 11:21:17 Check angles 11:21:17 SkyScan query 11:21:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.865<-14991 Statuses=0008 0009 11:21:18 Msec=750 True Az=112.995 Ze=-44.865 Az status=0008 Ze status=0009 11:21:18 Check angles 11:21:18 SkyScan query 11:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.835<-16389 Statuses=0008 0009 11:21:19 Msec=1500 True Az=112.995 Ze=-65.835 Az status=0008 Ze status=0009 11:21:19 Check angles 11:21:19 SkyScan query 11:21:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.805<-17787 Statuses=0008 0009 11:21:19 Msec=2250 True Az=112.995 Ze=-86.805 Az status=0008 Ze status=0009 11:21:20 Check angles 11:21:20 SkyScan query 11:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.775<-19185 Statuses=0008 0009 11:21:20 Msec=3000 True Az=112.995 Ze=-107.775 Az status=0008 Ze status=0009 11:21:20 Check angles 11:21:20 SkyScan query 11:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 11:21:21 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 11:21:21 Check angles 11:21:21 SkyScan query 11:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 11:21:22 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 11:21:22 Check angles 11:21:22 SkyScan query 11:21:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.61<-23374 Statuses=0008 0009 11:21:22 Msec=5250 True Az=112.995 Ze=-170.61 Az status=0008 Ze status=0009 11:21:23 Check angles 11:21:23 SkyScan query 11:21:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:21:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:21:23 Message to Master queued w/err=0: serial=275273 error=0 11:21:28 Received message from Master: op=Filter serial=275274 11:21:28 Color wheel filter change from 0 to 0 11:21:28 FLIGetFilterPos err=0 currentPosition=0 11:21:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:28 Filter is already there-color wheel unchanged 11:21:28 Received message from Master: op=Shutter serial=275275 11:21:28 Shutter LASER open 11:21:29 Received message from Camera: op=State serial=275277 11:21:29 GetSingleValue result=40 Value=cccccccc 11:21:29 SkyScan query 11:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:21:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:29 Parameters OK 11:21:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:29 Set A/D data flow result=40 11:21:29 Set A/D channel type result=40 11:21:29 Set A/D encoding result=40 11:21:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:29 Set channel filter=0.000000e+000 result=40 11:21:29 Config A/D Result=40 11:21:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:29 Get A/D filter: -9.255963e+061 result=40 11:21:29 Get A/D value=-858993460 result=40 11:21:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:29 Parameters OK 11:21:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:29 Set A/D data flow result=40 11:21:29 Set A/D channel type result=40 11:21:29 Set A/D encoding result=40 11:21:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:29 Set channel filter=0.000000e+000 result=40 11:21:29 Config A/D Result=40 11:21:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:29 Get A/D filter: -9.255963e+061 result=40 11:21:29 Get A/D value=-858993460 result=40 11:21:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:29 Aux= 11:21:29 Message to Camera, serial 275277 queued 11:21:38 Received message from Master: op=Shutter serial=275287 11:21:38 Shutter LASER close 11:21:38 Received message from Master: op=PointingHead serial=275291 11:21:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:21:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:21:38 Point started: ret=0 11:21:38 point_skyscan result=0 11:21:39 Check angles 11:21:39 SkyScan query 11:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 11:21:40 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 11:21:40 Check angles 11:21:40 SkyScan query 11:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 11:21:40 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 11:21:41 Check angles 11:21:41 SkyScan query 11:21:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 11:21:41 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 11:21:41 Check angles 11:21:41 SkyScan query 11:21:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 11:21:42 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 11:21:42 Check angles 11:21:42 SkyScan query 11:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 11:21:43 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 11:21:43 Check angles 11:21:43 SkyScan query 11:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.32<-14488 Statuses=0008 0009 11:21:43 Msec=3750 True Az=112.995 Ze=-37.32 Az status=0008 Ze status=0009 11:21:44 Check angles 11:21:44 SkyScan query 11:21:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.915<-13061 Statuses=0008 0009 11:21:44 Msec=4500 True Az=112.995 Ze=-15.915 Az status=0008 Ze status=0009 11:21:44 Check angles 11:21:44 SkyScan query 11:21:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.8<-11680 Statuses=0008 0009 11:21:45 Msec=5250 True Az=112.995 Ze=4.8 Az status=0008 Ze status=0009 11:21:45 Check angles 11:21:45 SkyScan query 11:21:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:21:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:21:46 Message to Master queued w/err=0: serial=275291 error=0 11:21:51 Received message from Master: op=Filter serial=275292 11:21:51 Color wheel filter change from 0 to 0 11:21:51 FLIGetFilterPos err=0 currentPosition=0 11:21:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:51 Filter is already there-color wheel unchanged 11:21:51 Received message from Master: op=Shutter serial=275293 11:21:51 Shutter LASER close 11:21:51 Received message from Camera: op=State serial=275295 11:21:51 GetSingleValue result=40 Value=cccccccc 11:21:51 SkyScan query 11:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:21:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:52 Parameters OK 11:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:52 Set A/D data flow result=40 11:21:52 Set A/D channel type result=40 11:21:52 Set A/D encoding result=40 11:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:52 Set channel filter=0.000000e+000 result=40 11:21:52 Config A/D Result=40 11:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:52 Get A/D filter: -9.255963e+061 result=40 11:21:52 Get A/D value=-858993460 result=40 11:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:52 Parameters OK 11:21:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:52 Set A/D data flow result=40 11:21:52 Set A/D channel type result=40 11:21:52 Set A/D encoding result=40 11:21:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:52 Set channel filter=0.000000e+000 result=40 11:21:52 Config A/D Result=40 11:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:52 Get A/D filter: -9.255963e+061 result=40 11:21:52 Get A/D value=-858993460 result=40 11:21:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:52 Aux= 11:21:52 Message to Camera, serial 275295 queued 11:22:28 Received message from Master: op=PointingHead serial=275308 11:22:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:22:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:22:29 Point started: ret=0 11:22:29 point_skyscan result=0 11:22:30 Check angles 11:22:30 SkyScan query 11:22:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:22:30 Message to Master queued w/err=0: serial=275308 error=0 11:22:35 Received message from Master: op=Filter serial=275309 11:22:35 Color wheel filter change from 0 to 0 11:22:35 FLIGetFilterPos err=0 currentPosition=0 11:22:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:35 Filter is already there-color wheel unchanged 11:22:35 Received message from Master: op=Shutter serial=275310 11:22:35 Shutter LASER close 11:22:35 Received message from Camera: op=State serial=275312 11:22:35 GetSingleValue result=40 Value=cccccccc 11:22:35 SkyScan query 11:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:22:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:36 Parameters OK 11:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:36 Set A/D data flow result=40 11:22:36 Set A/D channel type result=40 11:22:36 Set A/D encoding result=40 11:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:36 Set channel filter=0.000000e+000 result=40 11:22:36 Config A/D Result=40 11:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:36 Get A/D filter: -9.255963e+061 result=40 11:22:36 Get A/D value=-858993460 result=40 11:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:36 Parameters OK 11:22:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:36 Set A/D data flow result=40 11:22:36 Set A/D channel type result=40 11:22:36 Set A/D encoding result=40 11:22:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:36 Set channel filter=0.000000e+000 result=40 11:22:36 Config A/D Result=40 11:22:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:36 Get A/D filter: -9.255963e+061 result=40 11:22:36 Get A/D value=-858993460 result=40 11:22:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:36 Aux= 11:22:36 Message to Camera, serial 275312 queued 11:23:13 Received message from Master: op=PointingHead serial=275325 11:23:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:23:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:23:13 Point started: ret=0 11:23:13 point_skyscan result=0 11:23:14 Check angles 11:23:14 SkyScan query 11:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:23:14 Message to Master queued w/err=0: serial=275325 error=0 11:23:19 Received message from Master: op=Filter serial=275326 11:23:19 Color wheel filter change from 0 to 0 11:23:19 FLIGetFilterPos err=0 currentPosition=0 11:23:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:19 Filter is already there-color wheel unchanged 11:23:20 Received message from Master: op=Shutter serial=275327 11:23:20 Shutter LASER close 11:23:20 Received message from Camera: op=State serial=275329 11:23:20 GetSingleValue result=40 Value=cccccccc 11:23:20 SkyScan query 11:23:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:20 Parameters OK 11:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:20 Set A/D data flow result=40 11:23:20 Set A/D channel type result=40 11:23:20 Set A/D encoding result=40 11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:20 Set channel filter=0.000000e+000 result=40 11:23:20 Config A/D Result=40 11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:20 Get A/D filter: -9.255963e+061 result=40 11:23:20 Get A/D value=-858993460 result=40 11:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:20 Parameters OK 11:23:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:20 Set A/D data flow result=40 11:23:20 Set A/D channel type result=40 11:23:20 Set A/D encoding result=40 11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:20 Set channel filter=0.000000e+000 result=40 11:23:20 Config A/D Result=40 11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:20 Get A/D filter: -9.255963e+061 result=40 11:23:20 Get A/D value=-858993460 result=40 11:23:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:20 Aux= 11:23:20 Message to Camera, serial 275329 queued [UTC 2019-3-14 11:23:48] 11:23:57 Received message from Master: op=PointingHead serial=275342 11:23:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:23:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:23:57 Point started: ret=0 11:23:57 point_skyscan result=0 11:23:58 Check angles 11:23:58 SkyScan query 11:23:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:23:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:23:59 Message to Master queued w/err=0: serial=275342 error=0 11:24:04 Received message from Master: op=Filter serial=275343 11:24:04 Color wheel filter change from 0 to 0 11:24:04 FLIGetFilterPos err=0 currentPosition=0 11:24:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:04 Filter is already there-color wheel unchanged 11:24:04 Received message from Master: op=Shutter serial=275344 11:24:04 Shutter LASER close 11:24:04 Received message from Camera: op=State serial=275346 11:24:04 GetSingleValue result=40 Value=cccccccc 11:24:04 SkyScan query 11:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:24:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:05 Parameters OK 11:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:05 Set A/D data flow result=40 11:24:05 Set A/D channel type result=40 11:24:05 Set A/D encoding result=40 11:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:05 Set channel filter=0.000000e+000 result=40 11:24:05 Config A/D Result=40 11:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:05 Get A/D filter: -9.255963e+061 result=40 11:24:05 Get A/D value=-858993460 result=40 11:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:05 Parameters OK 11:24:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:05 Set A/D data flow result=40 11:24:05 Set A/D channel type result=40 11:24:05 Set A/D encoding result=40 11:24:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:05 Set channel filter=0.000000e+000 result=40 11:24:05 Config A/D Result=40 11:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:05 Get A/D filter: -9.255963e+061 result=40 11:24:05 Get A/D value=-858993460 result=40 11:24:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:05 Aux= 11:24:05 Message to Camera, serial 275346 queued 11:24:41 Received message from Master: op=PointingHead serial=275359 11:24:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:24:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:24:42 Point started: ret=0 11:24:42 point_skyscan result=0 11:24:42 Check angles 11:24:42 SkyScan query 11:24:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.325<-13555 Statuses=0008 0009 11:24:43 Msec=0 True Az=112.995 Ze=-23.325 Az status=0008 Ze status=0009 11:24:43 Check angles 11:24:43 SkyScan query 11:24:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.28<-14952 Statuses=0008 0009 11:24:44 Msec=750 True Az=112.995 Ze=-44.28 Az status=0008 Ze status=0009 11:24:44 Check angles 11:24:44 SkyScan query 11:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.205<-16347 Statuses=0008 0009 11:24:45 Msec=1500 True Az=112.995 Ze=-65.205 Az status=0008 Ze status=0009 11:24:45 Check angles 11:24:45 SkyScan query 11:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.595<-17773 Statuses=0008 0009 11:24:45 Msec=2250 True Az=112.995 Ze=-86.595 Az status=0008 Ze status=0009 11:24:46 Check angles 11:24:46 SkyScan query 11:24:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.015<-19201 Statuses=0008 0009 11:24:46 Msec=3000 True Az=112.995 Ze=-108.015 Az status=0008 Ze status=0009 11:24:46 Check angles 11:24:46 SkyScan query 11:24:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.94<-20596 Statuses=0008 0009 11:24:47 Msec=3750 True Az=112.995 Ze=-128.94 Az status=0008 Ze status=0009 11:24:47 Check angles 11:24:47 SkyScan query 11:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.33<-22022 Statuses=0008 0009 11:24:48 Msec=4500 True Az=112.995 Ze=-150.33 Az status=0008 Ze status=0009 11:24:48 Check angles 11:24:48 SkyScan query 11:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.435<-23429 Statuses=0008 0009 11:24:48 Msec=5250 True Az=112.995 Ze=-171.435 Az status=0008 Ze status=0009 11:24:49 Check angles 11:24:49 SkyScan query 11:24:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:24:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:24:49 Message to Master queued w/err=0: serial=275359 error=0 11:24:54 Received message from Master: op=Filter serial=275360 11:24:54 Color wheel filter change from 0 to 0 11:24:54 FLIGetFilterPos err=0 currentPosition=0 11:24:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:54 Filter is already there-color wheel unchanged 11:24:54 Received message from Master: op=Shutter serial=275361 11:24:54 Shutter LASER open 11:24:54 Received message from Camera: op=State serial=275363 11:24:54 GetSingleValue result=40 Value=cccccccc 11:24:54 SkyScan query 11:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:24:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:55 Parameters OK 11:24:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:55 Set A/D data flow result=40 11:24:55 Set A/D channel type result=40 11:24:55 Set A/D encoding result=40 11:24:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:55 Set channel filter=0.000000e+000 result=40 11:24:55 Config A/D Result=40 11:24:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:55 Get A/D filter: -9.255963e+061 result=40 11:24:55 Get A/D value=-858993460 result=40 11:24:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:55 Parameters OK 11:24:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:55 Set A/D data flow result=40 11:24:55 Set A/D channel type result=40 11:24:55 Set A/D encoding result=40 11:24:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:55 Set channel filter=0.000000e+000 result=40 11:24:55 Config A/D Result=40 11:24:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:55 Get A/D filter: -9.255963e+061 result=40 11:24:55 Get A/D value=-858993460 result=40 11:24:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:55 Aux= 11:24:55 Message to Camera, serial 275363 queued 11:25:03 Received message from Master: op=Shutter serial=275373 11:25:03 Shutter LASER close 11:25:04 Received message from Master: op=PointingHead serial=275377 11:25:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:04 Point started: ret=0 11:25:04 point_skyscan result=0 11:25:05 Check angles 11:25:05 SkyScan query 11:25:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.905<-21527 Statuses=0008 0009 11:25:06 Msec=0 True Az=112.995 Ze=-142.905 Az status=0008 Ze status=0009 11:25:06 Check angles 11:25:06 SkyScan query 11:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 11:25:07 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 11:25:07 Check angles 11:25:07 SkyScan query 11:25:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.05<-18670 Statuses=0008 0009 11:25:07 Msec=1500 True Az=112.995 Ze=-100.05 Az status=0008 Ze status=0009 11:25:08 Check angles 11:25:08 SkyScan query 11:25:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.125<-17275 Statuses=0008 0009 11:25:08 Msec=2250 True Az=112.995 Ze=-79.125 Az status=0008 Ze status=0009 11:25:08 Check angles 11:25:08 SkyScan query 11:25:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.155<-15877 Statuses=0008 0009 11:25:09 Msec=3000 True Az=112.995 Ze=-58.155 Az status=0008 Ze status=0009 11:25:09 Check angles 11:25:09 SkyScan query 11:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.26<-14484 Statuses=0008 0009 11:25:10 Msec=3750 True Az=112.995 Ze=-37.26 Az status=0008 Ze status=0009 11:25:10 Check angles 11:25:10 SkyScan query 11:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.275<-13085 Statuses=0008 0009 11:25:10 Msec=4500 True Az=112.995 Ze=-16.275 Az status=0008 Ze status=0009 11:25:11 Check angles 11:25:11 SkyScan query 11:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 11:25:11 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 11:25:11 Check angles 11:25:11 SkyScan query 11:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:25:12 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:25:12 Message to Master queued w/err=0: serial=275377 error=0 11:25:17 Received message from Master: op=Filter serial=275378 11:25:17 Color wheel filter change from 0 to 0 11:25:17 FLIGetFilterPos err=0 currentPosition=0 11:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:17 Filter is already there-color wheel unchanged 11:25:17 Received message from Master: op=Shutter serial=275379 11:25:17 Shutter LASER close 11:25:17 Received message from Camera: op=State serial=275381 11:25:17 GetSingleValue result=40 Value=cccccccc 11:25:17 SkyScan query 11:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:18 Parameters OK 11:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:18 Set A/D data flow result=40 11:25:18 Set A/D channel type result=40 11:25:18 Set A/D encoding result=40 11:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:18 Set channel filter=0.000000e+000 result=40 11:25:18 Config A/D Result=40 11:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:18 Get A/D filter: -9.255963e+061 result=40 11:25:18 Get A/D value=-858993460 result=40 11:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:18 Parameters OK 11:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:18 Set A/D data flow result=40 11:25:18 Set A/D channel type result=40 11:25:18 Set A/D encoding result=40 11:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:18 Set channel filter=0.000000e+000 result=40 11:25:18 Config A/D Result=40 11:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:18 Get A/D filter: -9.255963e+061 result=40 11:25:18 Get A/D value=-858993460 result=40 11:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:18 Aux= 11:25:18 Message to Camera, serial 275381 queued 11:25:55 Received message from Master: op=PointingHead serial=275394 11:25:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:25:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:25:55 Point started: ret=0 11:25:55 point_skyscan result=0 11:25:56 Check angles 11:25:56 SkyScan query 11:25:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:25:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:25:56 Message to Master queued w/err=0: serial=275394 error=0 11:26:01 Received message from Master: op=Filter serial=275395 11:26:01 Color wheel filter change from 0 to 0 11:26:01 FLIGetFilterPos err=0 currentPosition=0 11:26:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:01 Filter is already there-color wheel unchanged 11:26:01 Received message from Master: op=Shutter serial=275396 11:26:01 Shutter LASER close 11:26:02 Received message from Camera: op=State serial=275398 11:26:02 GetSingleValue result=40 Value=cccccccc 11:26:02 SkyScan query 11:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:26:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:02 Parameters OK 11:26:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:02 Set A/D data flow result=40 11:26:02 Set A/D channel type result=40 11:26:02 Set A/D encoding result=40 11:26:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:02 Set channel filter=0.000000e+000 result=40 11:26:02 Config A/D Result=40 11:26:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:02 Get A/D filter: -9.255963e+061 result=40 11:26:02 Get A/D value=-858993460 result=40 11:26:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:02 Parameters OK 11:26:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:02 Set A/D data flow result=40 11:26:02 Set A/D channel type result=40 11:26:02 Set A/D encoding result=40 11:26:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:02 Set channel filter=0.000000e+000 result=40 11:26:02 Config A/D Result=40 11:26:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:02 Get A/D filter: -9.255963e+061 result=40 11:26:02 Get A/D value=-858993460 result=40 11:26:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:02 Aux= 11:26:02 Message to Camera, serial 275398 queued 11:26:39 Received message from Master: op=PointingHead serial=275411 11:26:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:26:39 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:26:39 Point started: ret=0 11:26:39 point_skyscan result=0 11:26:40 Check angles 11:26:40 SkyScan query 11:26:41 SkyScan query done: ret=0 az=135.975<-9065 ze=-6.51<-12434 Statuses=0009 0008 11:26:41 Msec=0 True Az=135.975 Ze=-6.51 Az status=0009 Ze status=0008 11:26:41 Check angles 11:26:41 SkyScan query 11:26:41 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 11:26:41 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 11:26:42 Check angles 11:26:42 SkyScan query 11:26:42 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 11:26:42 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 11:26:42 Check angles 11:26:42 SkyScan query 11:26:43 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:26:43 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:26:43 Message to Master queued w/err=0: serial=275411 error=0 11:26:48 Received message from Master: op=Filter serial=275412 11:26:48 Color wheel filter change from 0 to 0 11:26:48 FLIGetFilterPos err=0 currentPosition=0 11:26:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:48 Filter is already there-color wheel unchanged 11:26:48 Received message from Master: op=Shutter serial=275413 11:26:48 Shutter LASER close 11:26:48 Received message from Camera: op=State serial=275415 11:26:48 GetSingleValue result=40 Value=cccccccc 11:26:48 SkyScan query 11:26:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:26:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:49 Parameters OK 11:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:49 Set A/D data flow result=40 11:26:49 Set A/D channel type result=40 11:26:49 Set A/D encoding result=40 11:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:49 Set channel filter=0.000000e+000 result=40 11:26:49 Config A/D Result=40 11:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:49 Get A/D filter: -9.255963e+061 result=40 11:26:49 Get A/D value=-858993460 result=40 11:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:49 Parameters OK 11:26:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:49 Set A/D data flow result=40 11:26:49 Set A/D channel type result=40 11:26:49 Set A/D encoding result=40 11:26:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:49 Set channel filter=0.000000e+000 result=40 11:26:49 Config A/D Result=40 11:26:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:49 Get A/D filter: -9.255963e+061 result=40 11:26:49 Get A/D value=-858993460 result=40 11:26:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:49 Aux= 11:26:49 Message to Camera, serial 275415 queued 11:27:26 Received message from Master: op=PointingHead serial=275428 11:27:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:27:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:27:26 Point started: ret=0 11:27:26 point_skyscan result=0 11:27:27 Check angles 11:27:27 SkyScan query 11:27:27 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 11:27:27 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 11:27:27 Check angles 11:27:27 SkyScan query 11:27:28 SkyScan query done: ret=0 az=135.69<-9046 ze=6.495<-11567 Statuses=0009 0008 11:27:28 Msec=750 True Az=135.69 Ze=6.495 Az status=0009 Ze status=0008 11:27:28 Check angles 11:27:28 SkyScan query 11:27:29 SkyScan query done: ret=0 az=118.185<-7879 ze=6.495<-11567 Statuses=0009 0008 11:27:29 Msec=1500 True Az=118.185 Ze=6.495 Az status=0009 Ze status=0008 11:27:29 Check angles 11:27:29 SkyScan query 11:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:29 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:27:29 Message to Master queued w/err=0: serial=275428 error=0 11:27:34 Received message from Master: op=Filter serial=275429 11:27:34 Color wheel filter change from 0 to 0 11:27:34 FLIGetFilterPos err=0 currentPosition=0 11:27:34 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:34 Filter is already there-color wheel unchanged 11:27:35 Received message from Master: op=Shutter serial=275430 11:27:35 Shutter LASER close 11:27:35 Received message from Camera: op=State serial=275432 11:27:35 GetSingleValue result=40 Value=cccccccc 11:27:35 SkyScan query 11:27:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:27:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:35 Parameters OK 11:27:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:35 Set A/D data flow result=40 11:27:35 Set A/D channel type result=40 11:27:35 Set A/D encoding result=40 11:27:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:35 Set channel filter=0.000000e+000 result=40 11:27:35 Config A/D Result=40 11:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:35 Get A/D filter: -9.255963e+061 result=40 11:27:35 Get A/D value=-858993460 result=40 11:27:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:35 Parameters OK 11:27:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:35 Set A/D data flow result=40 11:27:35 Set A/D channel type result=40 11:27:35 Set A/D encoding result=40 11:27:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:35 Set channel filter=0.000000e+000 result=40 11:27:35 Config A/D Result=40 11:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:35 Get A/D filter: -9.255963e+061 result=40 11:27:35 Get A/D value=-858993460 result=40 11:27:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:35 Aux= 11:27:35 Message to Camera, serial 275432 queued 11:28:12 Received message from Master: op=PointingHead serial=275445 11:28:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:28:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:28:12 Point started: ret=0 11:28:12 point_skyscan result=0 11:28:13 Check angles 11:28:13 SkyScan query 11:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 11:28:14 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 11:28:14 Check angles 11:28:14 SkyScan query 11:28:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.34<-14956 Statuses=0008 0009 11:28:14 Msec=750 True Az=112.995 Ze=-44.34 Az status=0008 Ze status=0009 11:28:15 Check angles 11:28:15 SkyScan query 11:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.28<-16352 Statuses=0008 0009 11:28:15 Msec=1500 True Az=112.995 Ze=-65.28 Az status=0008 Ze status=0009 11:28:15 Check angles 11:28:15 SkyScan query 11:28:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.235<-17749 Statuses=0008 0009 11:28:16 Msec=2250 True Az=112.995 Ze=-86.235 Az status=0008 Ze status=0009 11:28:16 Check angles 11:28:16 SkyScan query 11:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 11:28:17 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 11:28:17 Check angles 11:28:17 SkyScan query 11:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 11:28:17 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 11:28:18 Check angles 11:28:18 SkyScan query 11:28:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.58<-21972 Statuses=0008 0009 11:28:18 Msec=4500 True Az=112.995 Ze=-149.58 Az status=0008 Ze status=0009 11:28:18 Check angles 11:28:18 SkyScan query 11:28:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.835<-23389 Statuses=0008 0009 11:28:19 Msec=5250 True Az=112.995 Ze=-170.835 Az status=0008 Ze status=0009 11:28:19 Check angles 11:28:19 SkyScan query 11:28:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:28:20 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:28:20 Message to Master queued w/err=0: serial=275445 error=0 11:28:25 Received message from Master: op=Filter serial=275446 11:28:25 Color wheel filter change from 0 to 0 11:28:25 FLIGetFilterPos err=0 currentPosition=0 11:28:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:25 Filter is already there-color wheel unchanged 11:28:25 Received message from Master: op=Shutter serial=275447 11:28:25 Shutter LASER open 11:28:25 Received message from Camera: op=State serial=275449 11:28:25 GetSingleValue result=40 Value=cccccccc 11:28:25 SkyScan query 11:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:28:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:26 Parameters OK 11:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:26 Set A/D data flow result=40 11:28:26 Set A/D channel type result=40 11:28:26 Set A/D encoding result=40 11:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:26 Set channel filter=0.000000e+000 result=40 11:28:26 Config A/D Result=40 11:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:26 Get A/D filter: -9.255963e+061 result=40 11:28:26 Get A/D value=-858993460 result=40 11:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:26 Parameters OK 11:28:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:26 Set A/D data flow result=40 11:28:26 Set A/D channel type result=40 11:28:26 Set A/D encoding result=40 11:28:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:26 Set channel filter=0.000000e+000 result=40 11:28:26 Config A/D Result=40 11:28:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:26 Get A/D filter: -9.255963e+061 result=40 11:28:26 Get A/D value=-858993460 result=40 11:28:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:26 Aux= 11:28:26 Message to Camera, serial 275449 queued 11:28:34 Received message from Master: op=Shutter serial=275459 11:28:34 Shutter LASER close 11:28:35 Received message from Master: op=PointingHead serial=275463 11:28:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:28:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:28:35 Point started: ret=0 11:28:35 point_skyscan result=0 11:28:36 Check angles 11:28:36 SkyScan query 11:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 11:28:36 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 11:28:36 Check angles 11:28:36 SkyScan query 11:28:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 11:28:37 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 11:28:37 Check angles 11:28:37 SkyScan query 11:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 11:28:38 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 11:28:38 Check angles 11:28:38 SkyScan query 11:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.58<-17372 Statuses=0008 0009 11:28:38 Msec=2250 True Az=112.995 Ze=-80.58 Az status=0008 Ze status=0009 11:28:39 Check angles 11:28:39 SkyScan query 11:28:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.64<-15976 Statuses=0008 0009 11:28:39 Msec=3000 True Az=112.995 Ze=-59.64 Az status=0008 Ze status=0009 11:28:39 Check angles 11:28:39 SkyScan query 11:28:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.685<-14579 Statuses=0008 0009 11:28:40 Msec=3750 True Az=112.995 Ze=-38.685 Az status=0008 Ze status=0009 11:28:40 Check angles 11:28:40 SkyScan query 11:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.715<-13181 Statuses=0008 0009 11:28:41 Msec=4500 True Az=112.995 Ze=-17.715 Az status=0008 Ze status=0009 11:28:41 Check angles 11:28:41 SkyScan query 11:28:41 SkyScan query done: ret=0 az=112.995<-7533 ze=3.24<-11784 Statuses=0008 0009 11:28:41 Msec=5250 True Az=112.995 Ze=3.24 Az status=0008 Ze status=0009 11:28:42 Check angles 11:28:42 SkyScan query 11:28:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:28:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:28:42 Message to Master queued w/err=0: serial=275463 error=0 11:28:47 Received message from Master: op=Filter serial=275464 11:28:47 Color wheel filter change from 0 to 0 11:28:47 FLIGetFilterPos err=0 currentPosition=0 11:28:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:47 Filter is already there-color wheel unchanged 11:28:47 Received message from Master: op=Shutter serial=275465 11:28:47 Shutter LASER close 11:28:48 Received message from Camera: op=State serial=275467 11:28:48 GetSingleValue result=40 Value=cccccccc 11:28:48 SkyScan query 11:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:28:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:48 Parameters OK 11:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:48 Set A/D data flow result=40 11:28:48 Set A/D channel type result=40 11:28:48 Set A/D encoding result=40 11:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:48 Set channel filter=0.000000e+000 result=40 11:28:48 Config A/D Result=40 11:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:48 Get A/D filter: -9.255963e+061 result=40 11:28:48 Get A/D value=-858993460 result=40 11:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:48 Parameters OK 11:28:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:48 Set A/D data flow result=40 11:28:48 Set A/D channel type result=40 11:28:48 Set A/D encoding result=40 11:28:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:48 Set channel filter=0.000000e+000 result=40 11:28:48 Config A/D Result=40 11:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:48 Get A/D filter: -9.255963e+061 result=40 11:28:48 Get A/D value=-858993460 result=40 11:28:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:48 Aux= 11:28:48 Message to Camera, serial 275467 queued 11:29:25 Received message from Master: op=PointingHead serial=275480 11:29:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:29:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:29:25 Point started: ret=0 11:29:25 point_skyscan result=0 11:29:26 Check angles 11:29:26 SkyScan query 11:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:29:27 Message to Master queued w/err=0: serial=275480 error=0 11:29:32 Received message from Master: op=Filter serial=275481 11:29:32 Color wheel filter change from 0 to 0 11:29:32 FLIGetFilterPos err=0 currentPosition=0 11:29:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:32 Filter is already there-color wheel unchanged 11:29:32 Received message from Master: op=Shutter serial=275482 11:29:32 Shutter LASER close 11:29:32 Received message from Camera: op=State serial=275484 11:29:32 GetSingleValue result=40 Value=cccccccc 11:29:32 SkyScan query 11:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:29:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:32 Parameters OK 11:29:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:32 Set A/D data flow result=40 11:29:32 Set A/D channel type result=40 11:29:32 Set A/D encoding result=40 11:29:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:32 Set channel filter=0.000000e+000 result=40 11:29:32 Config A/D Result=40 11:29:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:32 Get A/D filter: -9.255963e+061 result=40 11:29:32 Get A/D value=-858993460 result=40 11:29:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:32 Parameters OK 11:29:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:32 Set A/D data flow result=40 11:29:32 Set A/D channel type result=40 11:29:32 Set A/D encoding result=40 11:29:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:32 Set channel filter=0.000000e+000 result=40 11:29:32 Config A/D Result=40 11:29:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:32 Get A/D filter: -9.255963e+061 result=40 11:29:32 Get A/D value=-858993460 result=40 11:29:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:32 Aux= 11:29:32 Message to Camera, serial 275484 queued 11:30:09 Received message from Master: op=PointingHead serial=275497 11:30:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:30:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:30:10 Point started: ret=0 11:30:10 point_skyscan result=0 11:30:11 Check angles 11:30:11 SkyScan query 11:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:30:11 Message to Master queued w/err=0: serial=275497 error=0 11:30:16 Received message from Master: op=Filter serial=275498 11:30:16 Color wheel filter change from 0 to 0 11:30:16 FLIGetFilterPos err=0 currentPosition=0 11:30:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:16 Filter is already there-color wheel unchanged 11:30:16 Received message from Master: op=Shutter serial=275499 11:30:16 Shutter LASER close 11:30:16 Received message from Camera: op=State serial=275501 11:30:16 GetSingleValue result=40 Value=cccccccc 11:30:16 SkyScan query 11:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:17 Parameters OK 11:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:17 Set A/D data flow result=40 11:30:17 Set A/D channel type result=40 11:30:17 Set A/D encoding result=40 11:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:17 Set channel filter=0.000000e+000 result=40 11:30:17 Config A/D Result=40 11:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:17 Get A/D filter: -9.255963e+061 result=40 11:30:17 Get A/D value=-858993460 result=40 11:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:17 Parameters OK 11:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:17 Set A/D data flow result=40 11:30:17 Set A/D channel type result=40 11:30:17 Set A/D encoding result=40 11:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:17 Set channel filter=0.000000e+000 result=40 11:30:17 Config A/D Result=40 11:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:17 Get A/D filter: -9.255963e+061 result=40 11:30:17 Get A/D value=-858993460 result=40 11:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:17 Aux= 11:30:17 Message to Camera, serial 275501 queued 11:30:54 Received message from Master: op=PointingHead serial=275514 11:30:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:30:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:30:54 Point started: ret=0 11:30:54 point_skyscan result=0 11:30:55 Check angles 11:30:55 SkyScan query 11:30:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:30:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:30:55 Message to Master queued w/err=0: serial=275514 error=0 11:31:00 Received message from Master: op=Filter serial=275515 11:31:00 Color wheel filter change from 0 to 0 11:31:00 FLIGetFilterPos err=0 currentPosition=0 11:31:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:00 Filter is already there-color wheel unchanged 11:31:01 Received message from Master: op=Shutter serial=275516 11:31:01 Shutter LASER close 11:31:01 Received message from Camera: op=State serial=275518 11:31:01 GetSingleValue result=40 Value=cccccccc 11:31:01 SkyScan query 11:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:31:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:01 Parameters OK 11:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:01 Set A/D data flow result=40 11:31:01 Set A/D channel type result=40 11:31:01 Set A/D encoding result=40 11:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:01 Set channel filter=0.000000e+000 result=40 11:31:01 Config A/D Result=40 11:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:01 Get A/D filter: -9.255963e+061 result=40 11:31:01 Get A/D value=-858993460 result=40 11:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:01 Parameters OK 11:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:01 Set A/D data flow result=40 11:31:01 Set A/D channel type result=40 11:31:01 Set A/D encoding result=40 11:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:01 Set channel filter=0.000000e+000 result=40 11:31:01 Config A/D Result=40 11:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:01 Get A/D filter: -9.255963e+061 result=40 11:31:01 Get A/D value=-858993460 result=40 11:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:01 Aux= 11:31:01 Message to Camera, serial 275518 queued 11:31:38 Received message from Master: op=PointingHead serial=275531 11:31:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:31:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:31:38 Point started: ret=0 11:31:38 point_skyscan result=0 11:31:39 Check angles 11:31:39 SkyScan query 11:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 11:31:40 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 11:31:40 Check angles 11:31:40 SkyScan query 11:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 11:31:40 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 11:31:41 Check angles 11:31:41 SkyScan query 11:31:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 11:31:41 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 11:31:41 Check angles 11:31:41 SkyScan query 11:31:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 11:31:42 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 11:31:42 Check angles 11:31:42 SkyScan query 11:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.61<-19174 Statuses=0008 0009 11:31:43 Msec=3000 True Az=112.995 Ze=-107.61 Az status=0008 Ze status=0009 11:31:43 Check angles 11:31:43 SkyScan query 11:31:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.015<-20601 Statuses=0008 0009 11:31:43 Msec=3750 True Az=112.995 Ze=-129.015 Az status=0008 Ze status=0009 11:31:44 Check angles 11:31:44 SkyScan query 11:31:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.405<-22027 Statuses=0008 0009 11:31:44 Msec=4500 True Az=112.995 Ze=-150.405 Az status=0008 Ze status=0009 11:31:44 Check angles 11:31:44 SkyScan query 11:31:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.165<-23411 Statuses=0008 0009 11:31:45 Msec=5250 True Az=112.995 Ze=-171.165 Az status=0008 Ze status=0009 11:31:45 Check angles 11:31:45 SkyScan query 11:31:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:31:46 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:31:46 Message to Master queued w/err=0: serial=275531 error=0 11:31:51 Received message from Master: op=Filter serial=275532 11:31:51 Color wheel filter change from 0 to 0 11:31:51 FLIGetFilterPos err=0 currentPosition=0 11:31:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:51 Filter is already there-color wheel unchanged 11:31:51 Received message from Master: op=Shutter serial=275533 11:31:51 Shutter LASER open 11:31:51 Received message from Camera: op=State serial=275535 11:31:51 GetSingleValue result=40 Value=cccccccc 11:31:51 SkyScan query 11:31:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:31:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:52 Parameters OK 11:31:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:52 Set A/D data flow result=40 11:31:52 Set A/D channel type result=40 11:31:52 Set A/D encoding result=40 11:31:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:52 Set channel filter=0.000000e+000 result=40 11:31:52 Config A/D Result=40 11:31:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:52 Get A/D filter: -9.255963e+061 result=40 11:31:52 Get A/D value=-858993460 result=40 11:31:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:52 Parameters OK 11:31:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:52 Set A/D data flow result=40 11:31:52 Set A/D channel type result=40 11:31:52 Set A/D encoding result=40 11:31:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:52 Set channel filter=0.000000e+000 result=40 11:31:52 Config A/D Result=40 11:31:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:52 Get A/D filter: -9.255963e+061 result=40 11:31:52 Get A/D value=-858993460 result=40 11:31:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:52 Aux= 11:31:52 Message to Camera, serial 275535 queued 11:32:00 Received message from Master: op=Shutter serial=275545 11:32:00 Shutter LASER close 11:32:01 Received message from Master: op=PointingHead serial=275549 11:32:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:01 Point started: ret=0 11:32:01 point_skyscan result=0 11:32:02 Check angles 11:32:02 SkyScan query 11:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 11:32:02 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 11:32:03 Check angles 11:32:03 SkyScan query 11:32:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 11:32:03 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 11:32:03 Check angles 11:32:03 SkyScan query 11:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 11:32:04 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 11:32:04 Check angles 11:32:04 SkyScan query 11:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 11:32:05 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 11:32:05 Check angles 11:32:05 SkyScan query 11:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.205<-15947 Statuses=0008 0009 11:32:05 Msec=3000 True Az=112.995 Ze=-59.205 Az status=0008 Ze status=0009 11:32:06 Check angles 11:32:06 SkyScan query 11:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.19<-14546 Statuses=0008 0009 11:32:06 Msec=3750 True Az=112.995 Ze=-38.19 Az status=0008 Ze status=0009 11:32:06 Check angles 11:32:06 SkyScan query 11:32:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.265<-13151 Statuses=0008 0009 11:32:07 Msec=4500 True Az=112.995 Ze=-17.265 Az status=0008 Ze status=0009 11:32:07 Check angles 11:32:07 SkyScan query 11:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 11:32:08 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 11:32:08 Check angles 11:32:08 SkyScan query 11:32:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:32:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:32:08 Message to Master queued w/err=0: serial=275549 error=0 11:32:13 Received message from Master: op=Filter serial=275550 11:32:13 Color wheel filter change from 0 to 0 11:32:13 FLIGetFilterPos err=0 currentPosition=0 11:32:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:13 Filter is already there-color wheel unchanged 11:32:14 Received message from Master: op=Shutter serial=275551 11:32:14 Shutter LASER close 11:32:14 Received message from Camera: op=State serial=275553 11:32:14 GetSingleValue result=40 Value=cccccccc 11:32:14 SkyScan query 11:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:14 Parameters OK 11:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:14 Set A/D data flow result=40 11:32:14 Set A/D channel type result=40 11:32:14 Set A/D encoding result=40 11:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:14 Set channel filter=0.000000e+000 result=40 11:32:14 Config A/D Result=40 11:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:14 Get A/D filter: -9.255963e+061 result=40 11:32:14 Get A/D value=-858993460 result=40 11:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:14 Parameters OK 11:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:14 Set A/D data flow result=40 11:32:14 Set A/D channel type result=40 11:32:14 Set A/D encoding result=40 11:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:14 Set channel filter=0.000000e+000 result=40 11:32:14 Config A/D Result=40 11:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:14 Get A/D filter: -9.255963e+061 result=40 11:32:14 Get A/D value=-858993460 result=40 11:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:14 Aux= 11:32:14 Message to Camera, serial 275553 queued 11:32:51 Received message from Master: op=PointingHead serial=275566 11:32:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:32:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:32:51 Point started: ret=0 11:32:51 point_skyscan result=0 11:32:52 Check angles 11:32:52 SkyScan query 11:32:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:53 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:32:53 Message to Master queued w/err=0: serial=275566 error=0 11:32:58 Received message from Master: op=Filter serial=275567 11:32:58 Color wheel filter change from 0 to 0 11:32:58 FLIGetFilterPos err=0 currentPosition=0 11:32:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:58 Filter is already there-color wheel unchanged 11:32:58 Received message from Master: op=Shutter serial=275568 11:32:58 Shutter LASER close 11:32:58 Received message from Camera: op=State serial=275570 11:32:58 GetSingleValue result=40 Value=cccccccc 11:32:58 SkyScan query 11:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:32:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:59 Parameters OK 11:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:59 Set A/D data flow result=40 11:32:59 Set A/D channel type result=40 11:32:59 Set A/D encoding result=40 11:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:59 Set channel filter=0.000000e+000 result=40 11:32:59 Config A/D Result=40 11:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:59 Get A/D filter: -9.255963e+061 result=40 11:32:59 Get A/D value=-858993460 result=40 11:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:59 Parameters OK 11:32:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:59 Set A/D data flow result=40 11:32:59 Set A/D channel type result=40 11:32:59 Set A/D encoding result=40 11:32:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:59 Set channel filter=0.000000e+000 result=40 11:32:59 Config A/D Result=40 11:32:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:59 Get A/D filter: -9.255963e+061 result=40 11:32:59 Get A/D value=-858993460 result=40 11:32:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:59 Aux= 11:32:59 Message to Camera, serial 275570 queued 11:33:35 Received message from Master: op=PointingHead serial=275583 11:33:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:33:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:33:36 Point started: ret=0 11:33:36 point_skyscan result=0 11:33:36 Received message from Master: op=Identify serial=275584 11:33:37 Check angles 11:33:37 SkyScan query 11:33:37 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 11:33:37 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 11:33:37 Check angles 11:33:37 SkyScan query 11:33:38 SkyScan query done: ret=0 az=153.45<-10230 ze=-6.495<-12433 Statuses=0009 0008 11:33:38 Msec=750 True Az=153.45 Ze=-6.495 Az status=0009 Ze status=0008 11:33:38 Check angles 11:33:38 SkyScan query 11:33:39 SkyScan query done: ret=0 az=170.835<-11389 ze=-6.495<-12433 Statuses=0009 0008 11:33:39 Msec=1500 True Az=170.835 Ze=-6.495 Az status=0009 Ze status=0008 11:33:39 Check angles 11:33:39 SkyScan query 11:33:39 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:33:39 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:33:39 Message to Master queued w/err=0: serial=275583 error=0 11:33:44 Received message from Master: op=Filter serial=275587 11:33:44 Color wheel filter change from 0 to 0 11:33:44 FLIGetFilterPos err=0 currentPosition=0 11:33:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:44 Filter is already there-color wheel unchanged 11:33:45 Received message from Master: op=Shutter serial=275588 11:33:45 Shutter LASER close 11:33:45 Received message from Camera: op=State serial=275590 11:33:45 GetSingleValue result=40 Value=cccccccc 11:33:45 SkyScan query 11:33:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:33:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:45 Parameters OK 11:33:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:45 Set A/D data flow result=40 11:33:45 Set A/D channel type result=40 11:33:45 Set A/D encoding result=40 11:33:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:45 Set channel filter=0.000000e+000 result=40 11:33:45 Config A/D Result=40 11:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:45 Get A/D filter: -9.255963e+061 result=40 11:33:45 Get A/D value=-858993460 result=40 11:33:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:45 Parameters OK 11:33:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:45 Set A/D data flow result=40 11:33:45 Set A/D channel type result=40 11:33:45 Set A/D encoding result=40 11:33:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:45 Set channel filter=0.000000e+000 result=40 11:33:45 Config A/D Result=40 11:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:45 Get A/D filter: -9.255963e+061 result=40 11:33:45 Get A/D value=-858993460 result=40 11:33:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:45 Aux= [UTC 2019-3-14 11:33:45] 11:33:45 Message to Camera, serial 275590 queued 11:34:22 Received message from Master: op=PointingHead serial=275603 11:34:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:34:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:34:22 Point started: ret=0 11:34:22 point_skyscan result=0 11:34:23 Check angles 11:34:23 SkyScan query 11:34:24 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 11:34:24 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 11:34:24 Check angles 11:34:24 SkyScan query 11:34:24 SkyScan query done: ret=0 az=135.345<-9023 ze=6.495<-11567 Statuses=0009 0008 11:34:24 Msec=750 True Az=135.345 Ze=6.495 Az status=0009 Ze status=0008 11:34:25 Check angles 11:34:25 SkyScan query 11:34:25 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 11:34:25 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 11:34:25 Check angles 11:34:25 SkyScan query 11:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:26 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:34:26 Message to Master queued w/err=0: serial=275603 error=0 11:34:31 Received message from Master: op=Filter serial=275604 11:34:31 Color wheel filter change from 0 to 0 11:34:31 FLIGetFilterPos err=0 currentPosition=0 11:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:31 Filter is already there-color wheel unchanged 11:34:31 Received message from Master: op=Shutter serial=275605 11:34:31 Shutter LASER close 11:34:31 Received message from Camera: op=State serial=275607 11:34:31 GetSingleValue result=40 Value=cccccccc 11:34:31 SkyScan query 11:34:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:34:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:32 Parameters OK 11:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:32 Set A/D data flow result=40 11:34:32 Set A/D channel type result=40 11:34:32 Set A/D encoding result=40 11:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:32 Set channel filter=0.000000e+000 result=40 11:34:32 Config A/D Result=40 11:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:32 Get A/D filter: -9.255963e+061 result=40 11:34:32 Get A/D value=-858993460 result=40 11:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:32 Parameters OK 11:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:32 Set A/D data flow result=40 11:34:32 Set A/D channel type result=40 11:34:32 Set A/D encoding result=40 11:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:32 Set channel filter=0.000000e+000 result=40 11:34:32 Config A/D Result=40 11:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:32 Get A/D filter: -9.255963e+061 result=40 11:34:32 Get A/D value=-858993460 result=40 11:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:32 Aux= 11:34:32 Message to Camera, serial 275607 queued 11:35:08 Received message from Master: op=PointingHead serial=275619 11:35:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:08 Point started: ret=0 11:35:08 point_skyscan result=0 11:35:09 Check angles 11:35:09 SkyScan query 11:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.475<-13565 Statuses=0008 0009 11:35:09 Msec=0 True Az=112.995 Ze=-23.475 Az status=0008 Ze status=0009 11:35:10 Check angles 11:35:10 SkyScan query 11:35:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.835<-14989 Statuses=0008 0009 11:35:10 Msec=750 True Az=112.995 Ze=-44.835 Az status=0008 Ze status=0009 11:35:10 Check angles 11:35:10 SkyScan query 11:35:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.82<-16388 Statuses=0008 0009 11:35:11 Msec=1500 True Az=112.995 Ze=-65.82 Az status=0008 Ze status=0009 11:35:11 Check angles 11:35:11 SkyScan query 11:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.775<-17785 Statuses=0008 0009 11:35:12 Msec=2250 True Az=112.995 Ze=-86.775 Az status=0008 Ze status=0009 11:35:12 Check angles 11:35:12 SkyScan query 11:35:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.21<-19214 Statuses=0008 0009 11:35:12 Msec=3000 True Az=112.995 Ze=-108.21 Az status=0008 Ze status=0009 11:35:13 Check angles 11:35:13 SkyScan query 11:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.135<-20609 Statuses=0008 0009 11:35:13 Msec=3750 True Az=112.995 Ze=-129.135 Az status=0008 Ze status=0009 11:35:13 Check angles 11:35:13 SkyScan query 11:35:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.09<-22006 Statuses=0008 0009 11:35:14 Msec=4500 True Az=112.995 Ze=-150.09 Az status=0008 Ze status=0009 11:35:14 Check angles 11:35:14 SkyScan query 11:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.24<-23416 Statuses=0008 0009 11:35:15 Msec=5250 True Az=112.995 Ze=-171.24 Az status=0008 Ze status=0009 11:35:15 Check angles 11:35:15 SkyScan query 11:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:15 Message to Master queued w/err=0: serial=275619 error=0 11:35:20 Received message from Master: op=Filter serial=275620 11:35:20 Color wheel filter change from 0 to 0 11:35:20 FLIGetFilterPos err=0 currentPosition=0 11:35:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:20 Filter is already there-color wheel unchanged 11:35:21 Received message from Master: op=Shutter serial=275621 11:35:21 Shutter LASER open 11:35:21 Received message from Camera: op=State serial=275623 11:35:21 GetSingleValue result=40 Value=cccccccc 11:35:21 SkyScan query 11:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:35:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:21 Parameters OK 11:35:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:21 Set A/D data flow result=40 11:35:21 Set A/D channel type result=40 11:35:21 Set A/D encoding result=40 11:35:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:21 Set channel filter=0.000000e+000 result=40 11:35:21 Config A/D Result=40 11:35:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:21 Get A/D filter: -9.255963e+061 result=40 11:35:21 Get A/D value=-858993460 result=40 11:35:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:21 Parameters OK 11:35:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:21 Set A/D data flow result=40 11:35:21 Set A/D channel type result=40 11:35:21 Set A/D encoding result=40 11:35:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:21 Set channel filter=0.000000e+000 result=40 11:35:21 Config A/D Result=40 11:35:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:21 Get A/D filter: -9.255963e+061 result=40 11:35:21 Get A/D value=-858993460 result=40 11:35:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:21 Aux= 11:35:21 Message to Camera, serial 275623 queued 11:35:30 Received message from Master: op=Shutter serial=275633 11:35:30 Shutter LASER close 11:35:30 Received message from Master: op=PointingHead serial=275637 11:35:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:35:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:35:30 Point started: ret=0 11:35:30 point_skyscan result=0 11:35:31 Check angles 11:35:31 SkyScan query 11:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 11:35:32 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 11:35:32 Check angles 11:35:32 SkyScan query 11:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.68<-20112 Statuses=0008 0009 11:35:33 Msec=750 True Az=112.995 Ze=-121.68 Az status=0008 Ze status=0009 11:35:33 Check angles 11:35:33 SkyScan query 11:35:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.77<-18718 Statuses=0008 0009 11:35:33 Msec=1500 True Az=112.995 Ze=-100.77 Az status=0008 Ze status=0009 11:35:34 Check angles 11:35:34 SkyScan query 11:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.785<-17319 Statuses=0008 0009 11:35:34 Msec=2250 True Az=112.995 Ze=-79.785 Az status=0008 Ze status=0009 11:35:34 Check angles 11:35:34 SkyScan query 11:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 11:35:35 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 11:35:35 Check angles 11:35:35 SkyScan query 11:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 11:35:36 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 11:35:36 Check angles 11:35:36 SkyScan query 11:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 11:35:36 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 11:35:37 Check angles 11:35:37 SkyScan query 11:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 11:35:37 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 11:35:37 Check angles 11:35:37 SkyScan query 11:35:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:35:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:35:38 Message to Master queued w/err=0: serial=275637 error=0 11:35:43 Received message from Master: op=Filter serial=275638 11:35:43 Color wheel filter change from 0 to 0 11:35:43 FLIGetFilterPos err=0 currentPosition=0 11:35:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:43 Filter is already there-color wheel unchanged 11:35:43 Received message from Master: op=Shutter serial=275639 11:35:43 Shutter LASER close 11:35:43 Received message from Camera: op=State serial=275641 11:35:43 GetSingleValue result=40 Value=cccccccc 11:35:43 SkyScan query 11:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:35:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:44 Parameters OK 11:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:44 Set A/D data flow result=40 11:35:44 Set A/D channel type result=40 11:35:44 Set A/D encoding result=40 11:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:44 Set channel filter=0.000000e+000 result=40 11:35:44 Config A/D Result=40 11:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:44 Get A/D filter: -9.255963e+061 result=40 11:35:44 Get A/D value=-858993460 result=40 11:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:44 Parameters OK 11:35:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:44 Set A/D data flow result=40 11:35:44 Set A/D channel type result=40 11:35:44 Set A/D encoding result=40 11:35:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:44 Set channel filter=0.000000e+000 result=40 11:35:44 Config A/D Result=40 11:35:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:44 Get A/D filter: -9.255963e+061 result=40 11:35:44 Get A/D value=-858993460 result=40 11:35:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:44 Aux= 11:35:44 Message to Camera, serial 275641 queued 11:36:21 Received message from Master: op=PointingHead serial=275654 11:36:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:36:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:36:21 Point started: ret=0 11:36:21 point_skyscan result=0 11:36:22 Check angles 11:36:22 SkyScan query 11:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:36:22 Message to Master queued w/err=0: serial=275654 error=0 11:36:27 Received message from Master: op=Filter serial=275655 11:36:27 Color wheel filter change from 0 to 0 11:36:27 FLIGetFilterPos err=0 currentPosition=0 11:36:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:27 Filter is already there-color wheel unchanged 11:36:27 Received message from Master: op=Shutter serial=275656 11:36:27 Shutter LASER close 11:36:28 Received message from Camera: op=State serial=275658 11:36:28 GetSingleValue result=40 Value=cccccccc 11:36:28 SkyScan query 11:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:36:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:28 Parameters OK 11:36:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:28 Set A/D data flow result=40 11:36:28 Set A/D channel type result=40 11:36:28 Set A/D encoding result=40 11:36:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:28 Set channel filter=0.000000e+000 result=40 11:36:28 Config A/D Result=40 11:36:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:28 Get A/D filter: -9.255963e+061 result=40 11:36:28 Get A/D value=-858993460 result=40 11:36:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:28 Parameters OK 11:36:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:28 Set A/D data flow result=40 11:36:28 Set A/D channel type result=40 11:36:28 Set A/D encoding result=40 11:36:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:28 Set channel filter=0.000000e+000 result=40 11:36:28 Config A/D Result=40 11:36:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:28 Get A/D filter: -9.255963e+061 result=40 11:36:28 Get A/D value=-858993460 result=40 11:36:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:28 Aux= 11:36:28 Message to Camera, serial 275658 queued 11:37:05 Received message from Master: op=PointingHead serial=275671 11:37:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:05 Point started: ret=0 11:37:05 point_skyscan result=0 11:37:06 Check angles 11:37:06 SkyScan query 11:37:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:07 Message to Master queued w/err=0: serial=275671 error=0 11:37:12 Received message from Master: op=Filter serial=275672 11:37:12 Color wheel filter change from 0 to 0 11:37:12 FLIGetFilterPos err=0 currentPosition=0 11:37:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:12 Filter is already there-color wheel unchanged 11:37:12 Received message from Master: op=Shutter serial=275673 11:37:12 Shutter LASER close 11:37:12 Received message from Camera: op=State serial=275675 11:37:12 GetSingleValue result=40 Value=cccccccc 11:37:12 SkyScan query 11:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:12 Parameters OK 11:37:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:12 Set A/D data flow result=40 11:37:12 Set A/D channel type result=40 11:37:12 Set A/D encoding result=40 11:37:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:12 Set channel filter=0.000000e+000 result=40 11:37:12 Config A/D Result=40 11:37:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:12 Get A/D filter: -9.255963e+061 result=40 11:37:12 Get A/D value=-858993460 result=40 11:37:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:12 Parameters OK 11:37:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:12 Set A/D data flow result=40 11:37:12 Set A/D channel type result=40 11:37:12 Set A/D encoding result=40 11:37:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:12 Set channel filter=0.000000e+000 result=40 11:37:12 Config A/D Result=40 11:37:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:12 Get A/D filter: -9.255963e+061 result=40 11:37:12 Get A/D value=-858993460 result=40 11:37:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:12 Aux= 11:37:12 Message to Camera, serial 275675 queued 11:37:49 Received message from Master: op=PointingHead serial=275688 11:37:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:37:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:37:50 Point started: ret=0 11:37:50 point_skyscan result=0 11:37:50 Check angles 11:37:50 SkyScan query 11:37:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:37:51 Message to Master queued w/err=0: serial=275688 error=0 11:37:56 Received message from Master: op=Filter serial=275689 11:37:56 Color wheel filter change from 0 to 0 11:37:56 FLIGetFilterPos err=0 currentPosition=0 11:37:56 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:56 Filter is already there-color wheel unchanged 11:37:56 Received message from Master: op=Shutter serial=275690 11:37:56 Shutter LASER close 11:37:56 Received message from Camera: op=State serial=275692 11:37:56 GetSingleValue result=40 Value=cccccccc 11:37:56 SkyScan query 11:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:37:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:57 Parameters OK 11:37:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:57 Set A/D data flow result=40 11:37:57 Set A/D channel type result=40 11:37:57 Set A/D encoding result=40 11:37:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:57 Set channel filter=0.000000e+000 result=40 11:37:57 Config A/D Result=40 11:37:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:57 Get A/D filter: -9.255963e+061 result=40 11:37:57 Get A/D value=-858993460 result=40 11:37:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:57 Parameters OK 11:37:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:57 Set A/D data flow result=40 11:37:57 Set A/D channel type result=40 11:37:57 Set A/D encoding result=40 11:37:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:57 Set channel filter=0.000000e+000 result=40 11:37:57 Config A/D Result=40 11:37:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:57 Get A/D filter: -9.255963e+061 result=40 11:37:57 Get A/D value=-858993460 result=40 11:37:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:57 Aux= 11:37:57 Message to Camera, serial 275692 queued 11:38:34 Received message from Master: op=PointingHead serial=275705 11:38:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:38:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:38:34 Point started: ret=0 11:38:34 point_skyscan result=0 11:38:35 Check angles 11:38:35 SkyScan query 11:38:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 11:38:35 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 11:38:35 Check angles 11:38:35 SkyScan query 11:38:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.175<-14945 Statuses=0008 0009 11:38:36 Msec=750 True Az=112.995 Ze=-44.175 Az status=0008 Ze status=0009 11:38:36 Check angles 11:38:36 SkyScan query 11:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 11:38:37 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 11:38:37 Check angles 11:38:37 SkyScan query 11:38:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 11:38:37 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 11:38:38 Check angles 11:38:38 SkyScan query 11:38:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 11:38:38 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 11:38:38 Check angles 11:38:38 SkyScan query 11:38:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.37<-20558 Statuses=0008 0009 11:38:39 Msec=3750 True Az=112.995 Ze=-128.37 Az status=0008 Ze status=0009 11:38:39 Check angles 11:38:39 SkyScan query 11:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.79<-21986 Statuses=0008 0009 11:38:40 Msec=4500 True Az=112.995 Ze=-149.79 Az status=0008 Ze status=0009 11:38:40 Check angles 11:38:40 SkyScan query 11:38:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.03<-23402 Statuses=0008 0009 11:38:40 Msec=5250 True Az=112.995 Ze=-171.03 Az status=0008 Ze status=0009 11:38:41 Check angles 11:38:41 SkyScan query 11:38:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:38:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:38:41 Message to Master queued w/err=0: serial=275705 error=0 11:38:46 Received message from Master: op=Filter serial=275706 11:38:46 Color wheel filter change from 0 to 0 11:38:46 FLIGetFilterPos err=0 currentPosition=0 11:38:46 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:46 Filter is already there-color wheel unchanged 11:38:46 Received message from Master: op=Shutter serial=275707 11:38:46 Shutter LASER open 11:38:47 Received message from Camera: op=State serial=275709 11:38:47 GetSingleValue result=40 Value=cccccccc 11:38:47 SkyScan query 11:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:38:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:47 Parameters OK 11:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:47 Set A/D data flow result=40 11:38:47 Set A/D channel type result=40 11:38:47 Set A/D encoding result=40 11:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:47 Set channel filter=0.000000e+000 result=40 11:38:47 Config A/D Result=40 11:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:47 Get A/D filter: -9.255963e+061 result=40 11:38:47 Get A/D value=-858993460 result=40 11:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:47 Parameters OK 11:38:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:47 Set A/D data flow result=40 11:38:47 Set A/D channel type result=40 11:38:47 Set A/D encoding result=40 11:38:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:47 Set channel filter=0.000000e+000 result=40 11:38:47 Config A/D Result=40 11:38:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:47 Get A/D filter: -9.255963e+061 result=40 11:38:47 Get A/D value=-858993460 result=40 11:38:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:47 Aux= 11:38:47 Message to Camera, serial 275709 queued 11:38:56 Received message from Master: op=Shutter serial=275719 11:38:56 Shutter LASER close 11:38:56 Received message from Master: op=PointingHead serial=275723 11:38:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:38:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:38:56 Point started: ret=0 11:38:56 point_skyscan result=0 11:38:57 Check angles 11:38:57 SkyScan query 11:38:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.98<-21532 Statuses=0008 0009 11:38:58 Msec=0 True Az=112.995 Ze=-142.98 Az status=0008 Ze status=0009 11:38:58 Check angles 11:38:58 SkyScan query 11:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.545<-20103 Statuses=0008 0009 11:38:59 Msec=750 True Az=112.995 Ze=-121.545 Az status=0008 Ze status=0009 11:38:59 Check angles 11:38:59 SkyScan query 11:38:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 11:38:59 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 11:39:00 Check angles 11:39:00 SkyScan query 11:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 11:39:00 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 11:39:00 Check angles 11:39:00 SkyScan query 11:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.68<-15912 Statuses=0008 0009 11:39:01 Msec=3000 True Az=112.995 Ze=-58.68 Az status=0008 Ze status=0009 11:39:01 Check angles 11:39:01 SkyScan query 11:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 11:39:02 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 11:39:02 Check angles 11:39:02 SkyScan query 11:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 11:39:02 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 11:39:03 Check angles 11:39:03 SkyScan query 11:39:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 11:39:03 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 11:39:03 Check angles 11:39:03 SkyScan query 11:39:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:39:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:39:04 Message to Master queued w/err=0: serial=275723 error=0 11:39:09 Received message from Master: op=Filter serial=275724 11:39:09 Color wheel filter change from 0 to 0 11:39:09 FLIGetFilterPos err=0 currentPosition=0 11:39:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:09 Filter is already there-color wheel unchanged 11:39:09 Received message from Master: op=Shutter serial=275725 11:39:09 Shutter LASER close 11:39:09 Received message from Camera: op=State serial=275727 11:39:09 GetSingleValue result=40 Value=cccccccc 11:39:09 SkyScan query 11:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:10 Parameters OK 11:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:10 Set A/D data flow result=40 11:39:10 Set A/D channel type result=40 11:39:10 Set A/D encoding result=40 11:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:10 Set channel filter=0.000000e+000 result=40 11:39:10 Config A/D Result=40 11:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:10 Get A/D filter: -9.255963e+061 result=40 11:39:10 Get A/D value=-858993460 result=40 11:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:10 Parameters OK 11:39:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:10 Set A/D data flow result=40 11:39:10 Set A/D channel type result=40 11:39:10 Set A/D encoding result=40 11:39:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:10 Set channel filter=0.000000e+000 result=40 11:39:10 Config A/D Result=40 11:39:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:10 Get A/D filter: -9.255963e+061 result=40 11:39:10 Get A/D value=-858993460 result=40 11:39:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:10 Aux= 11:39:10 Message to Camera, serial 275727 queued 11:39:47 Received message from Master: op=PointingHead serial=275740 11:39:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:39:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:39:47 Point started: ret=0 11:39:47 point_skyscan result=0 11:39:48 Check angles 11:39:48 SkyScan query 11:39:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:39:48 Message to Master queued w/err=0: serial=275740 error=0 11:39:53 Received message from Master: op=Filter serial=275741 11:39:53 Color wheel filter change from 0 to 0 11:39:53 FLIGetFilterPos err=0 currentPosition=0 11:39:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:53 Filter is already there-color wheel unchanged 11:39:54 Received message from Master: op=Shutter serial=275742 11:39:54 Shutter LASER close 11:39:54 Received message from Camera: op=State serial=275744 11:39:54 GetSingleValue result=40 Value=cccccccc 11:39:54 SkyScan query 11:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:39:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:54 Parameters OK 11:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:54 Set A/D data flow result=40 11:39:54 Set A/D channel type result=40 11:39:54 Set A/D encoding result=40 11:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:54 Set channel filter=0.000000e+000 result=40 11:39:54 Config A/D Result=40 11:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:54 Get A/D filter: -9.255963e+061 result=40 11:39:54 Get A/D value=-858993460 result=40 11:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:54 Parameters OK 11:39:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:54 Set A/D data flow result=40 11:39:54 Set A/D channel type result=40 11:39:54 Set A/D encoding result=40 11:39:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:54 Set channel filter=0.000000e+000 result=40 11:39:54 Config A/D Result=40 11:39:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:54 Get A/D filter: -9.255963e+061 result=40 11:39:54 Get A/D value=-858993460 result=40 11:39:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:54 Aux= 11:39:54 Message to Camera, serial 275744 queued 11:40:31 Received message from Master: op=PointingHead serial=275757 11:40:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:40:31 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:40:31 Point started: ret=0 11:40:31 point_skyscan result=0 11:40:32 Check angles 11:40:32 SkyScan query 11:40:33 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 11:40:33 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 11:40:33 Check angles 11:40:33 SkyScan query 11:40:33 SkyScan query done: ret=0 az=154.125<-10275 ze=-6.495<-12433 Statuses=0009 0008 11:40:33 Msec=750 True Az=154.125 Ze=-6.495 Az status=0009 Ze status=0008 11:40:34 Check angles 11:40:34 SkyScan query 11:40:34 SkyScan query done: ret=0 az=171.48<-11432 ze=-6.495<-12433 Statuses=0009 0008 11:40:34 Msec=1500 True Az=171.48 Ze=-6.495 Az status=0009 Ze status=0008 11:40:34 Check angles 11:40:34 SkyScan query 11:40:35 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:40:35 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:40:35 Message to Master queued w/err=0: serial=275757 error=0 11:40:40 Received message from Master: op=Filter serial=275758 11:40:40 Color wheel filter change from 0 to 0 11:40:40 FLIGetFilterPos err=0 currentPosition=0 11:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:40 Filter is already there-color wheel unchanged 11:40:40 Received message from Master: op=Shutter serial=275759 11:40:40 Shutter LASER close 11:40:40 Received message from Camera: op=State serial=275761 11:40:40 GetSingleValue result=40 Value=cccccccc 11:40:40 SkyScan query 11:40:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:41 Parameters OK 11:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:41 Set A/D data flow result=40 11:40:41 Set A/D channel type result=40 11:40:41 Set A/D encoding result=40 11:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:41 Set channel filter=0.000000e+000 result=40 11:40:41 Config A/D Result=40 11:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:41 Get A/D filter: -9.255963e+061 result=40 11:40:41 Get A/D value=-858993460 result=40 11:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:41 Parameters OK 11:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:41 Set A/D data flow result=40 11:40:41 Set A/D channel type result=40 11:40:41 Set A/D encoding result=40 11:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:41 Set channel filter=0.000000e+000 result=40 11:40:41 Config A/D Result=40 11:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:41 Get A/D filter: -9.255963e+061 result=40 11:40:41 Get A/D value=-858993460 result=40 11:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:41 Aux= 11:40:41 Message to Camera, serial 275761 queued 11:41:18 Received message from Master: op=PointingHead serial=275774 11:41:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:41:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:41:18 Point started: ret=0 11:41:18 point_skyscan result=0 11:41:19 Check angles 11:41:19 SkyScan query 11:41:19 SkyScan query done: ret=0 az=152.73<-10182 ze=6.51<-11566 Statuses=0009 0008 11:41:19 Msec=0 True Az=152.73 Ze=6.51 Az status=0009 Ze status=0008 11:41:19 Check angles 11:41:19 SkyScan query 11:41:20 SkyScan query done: ret=0 az=135.27<-9018 ze=6.495<-11567 Statuses=0009 0008 11:41:20 Msec=750 True Az=135.27 Ze=6.495 Az status=0009 Ze status=0008 11:41:20 Check angles 11:41:20 SkyScan query 11:41:21 SkyScan query done: ret=0 az=117.81<-7854 ze=6.495<-11567 Statuses=0009 0008 11:41:21 Msec=1500 True Az=117.81 Ze=6.495 Az status=0009 Ze status=0008 11:41:21 Check angles 11:41:21 SkyScan query 11:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:21 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:41:21 Message to Master queued w/err=0: serial=275774 error=0 11:41:26 Received message from Master: op=Filter serial=275775 11:41:26 Color wheel filter change from 0 to 0 11:41:26 FLIGetFilterPos err=0 currentPosition=0 11:41:26 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:26 Filter is already there-color wheel unchanged 11:41:27 Received message from Master: op=Shutter serial=275776 11:41:27 Shutter LASER close 11:41:27 Received message from Camera: op=State serial=275778 11:41:27 GetSingleValue result=40 Value=cccccccc 11:41:27 SkyScan query 11:41:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:41:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:27 Parameters OK 11:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:27 Set A/D data flow result=40 11:41:27 Set A/D channel type result=40 11:41:27 Set A/D encoding result=40 11:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:27 Set channel filter=0.000000e+000 result=40 11:41:27 Config A/D Result=40 11:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:27 Get A/D filter: -9.255963e+061 result=40 11:41:27 Get A/D value=-858993460 result=40 11:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:27 Parameters OK 11:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:27 Set A/D data flow result=40 11:41:27 Set A/D channel type result=40 11:41:27 Set A/D encoding result=40 11:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:27 Set channel filter=0.000000e+000 result=40 11:41:27 Config A/D Result=40 11:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:27 Get A/D filter: -9.255963e+061 result=40 11:41:27 Get A/D value=-858993460 result=40 11:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:27 Aux= 11:41:27 Message to Camera, serial 275778 queued 11:42:04 Received message from Master: op=PointingHead serial=275791 11:42:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:42:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:42:04 Point started: ret=0 11:42:04 point_skyscan result=0 11:42:05 Check angles 11:42:05 SkyScan query 11:42:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 11:42:06 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 11:42:06 Check angles 11:42:06 SkyScan query 11:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.88<-14992 Statuses=0008 0009 11:42:07 Msec=750 True Az=112.995 Ze=-44.88 Az status=0008 Ze status=0009 11:42:07 Check angles 11:42:07 SkyScan query 11:42:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.3<-16420 Statuses=0008 0009 11:42:07 Msec=1500 True Az=112.995 Ze=-66.3 Az status=0008 Ze status=0009 11:42:08 Check angles 11:42:08 SkyScan query 11:42:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.255<-17817 Statuses=0008 0009 11:42:08 Msec=2250 True Az=112.995 Ze=-87.255 Az status=0008 Ze status=0009 11:42:08 Check angles 11:42:08 SkyScan query 11:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.6<-19240 Statuses=0008 0009 11:42:09 Msec=3000 True Az=112.995 Ze=-108.6 Az status=0008 Ze status=0009 11:42:09 Check angles 11:42:09 SkyScan query 11:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.975<-20665 Statuses=0008 0009 11:42:10 Msec=3750 True Az=112.995 Ze=-129.975 Az status=0008 Ze status=0009 11:42:10 Check angles 11:42:10 SkyScan query 11:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.93<-22062 Statuses=0008 0009 11:42:10 Msec=4500 True Az=112.995 Ze=-150.93 Az status=0008 Ze status=0009 11:42:11 Check angles 11:42:11 SkyScan query 11:42:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.57<-23438 Statuses=0008 0009 11:42:11 Msec=5250 True Az=112.995 Ze=-171.57 Az status=0008 Ze status=0009 11:42:11 Check angles 11:42:11 SkyScan query 11:42:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:42:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:42:12 Message to Master queued w/err=0: serial=275791 error=0 11:42:17 Received message from Master: op=Filter serial=275792 11:42:17 Color wheel filter change from 0 to 0 11:42:17 FLIGetFilterPos err=0 currentPosition=0 11:42:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:17 Filter is already there-color wheel unchanged 11:42:17 Received message from Master: op=Shutter serial=275793 11:42:17 Shutter LASER open 11:42:17 Received message from Camera: op=State serial=275795 11:42:17 GetSingleValue result=40 Value=cccccccc 11:42:17 SkyScan query 11:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:42:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:18 Parameters OK 11:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:18 Set A/D data flow result=40 11:42:18 Set A/D channel type result=40 11:42:18 Set A/D encoding result=40 11:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:18 Set channel filter=0.000000e+000 result=40 11:42:18 Config A/D Result=40 11:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:18 Get A/D filter: -9.255963e+061 result=40 11:42:18 Get A/D value=-858993460 result=40 11:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:18 Parameters OK 11:42:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:18 Set A/D data flow result=40 11:42:18 Set A/D channel type result=40 11:42:18 Set A/D encoding result=40 11:42:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:18 Set channel filter=0.000000e+000 result=40 11:42:18 Config A/D Result=40 11:42:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:18 Get A/D filter: -9.255963e+061 result=40 11:42:18 Get A/D value=-858993460 result=40 11:42:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:18 Aux= 11:42:18 Message to Camera, serial 275795 queued 11:42:26 Received message from Master: op=Shutter serial=275805 11:42:26 Shutter LASER close 11:42:27 Received message from Master: op=PointingHead serial=275809 11:42:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:42:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:42:27 Point started: ret=0 11:42:27 point_skyscan result=0 11:42:28 Check angles 11:42:28 SkyScan query 11:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 11:42:28 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 11:42:29 Check angles 11:42:29 SkyScan query 11:42:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 11:42:29 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 11:42:29 Check angles 11:42:29 SkyScan query 11:42:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 11:42:30 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 11:42:30 Check angles 11:42:30 SkyScan query 11:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 11:42:31 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 11:42:31 Check angles 11:42:31 SkyScan query 11:42:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 11:42:31 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 11:42:32 Check angles 11:42:32 SkyScan query 11:42:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 11:42:32 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 11:42:32 Check angles 11:42:32 SkyScan query 11:42:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 11:42:33 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 11:42:33 Check angles 11:42:33 SkyScan query 11:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 11:42:34 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 11:42:34 Check angles 11:42:34 SkyScan query 11:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:42:34 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:42:34 Message to Master queued w/err=0: serial=275809 error=0 11:42:39 Received message from Master: op=Filter serial=275810 11:42:39 Color wheel filter change from 0 to 0 11:42:39 FLIGetFilterPos err=0 currentPosition=0 11:42:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:39 Filter is already there-color wheel unchanged 11:42:40 Received message from Master: op=Shutter serial=275811 11:42:40 Shutter LASER close 11:42:40 Received message from Camera: op=State serial=275813 11:42:40 GetSingleValue result=40 Value=cccccccc 11:42:40 SkyScan query 11:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:42:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:40 Parameters OK 11:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:40 Set A/D data flow result=40 11:42:40 Set A/D channel type result=40 11:42:40 Set A/D encoding result=40 11:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:40 Set channel filter=0.000000e+000 result=40 11:42:40 Config A/D Result=40 11:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:40 Get A/D filter: -9.255963e+061 result=40 11:42:40 Get A/D value=-858993460 result=40 11:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:40 Parameters OK 11:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:40 Set A/D data flow result=40 11:42:40 Set A/D channel type result=40 11:42:40 Set A/D encoding result=40 11:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:40 Set channel filter=0.000000e+000 result=40 11:42:40 Config A/D Result=40 11:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:40 Get A/D filter: -9.255963e+061 result=40 11:42:40 Get A/D value=-858993460 result=40 11:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:40 Aux= 11:42:40 Message to Camera, serial 275813 queued 11:43:17 Received message from Master: op=PointingHead serial=275826 11:43:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:43:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:43:17 Point started: ret=0 11:43:17 point_skyscan result=0 11:43:18 Check angles 11:43:18 SkyScan query 11:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:43:19 Message to Master queued w/err=0: serial=275826 error=0 11:43:24 Received message from Master: op=Filter serial=275827 11:43:24 Color wheel filter change from 0 to 0 11:43:24 FLIGetFilterPos err=0 currentPosition=0 11:43:24 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:24 Filter is already there-color wheel unchanged 11:43:24 Received message from Master: op=Shutter serial=275828 11:43:24 Shutter LASER close 11:43:24 Received message from Camera: op=State serial=275830 11:43:24 GetSingleValue result=40 Value=cccccccc 11:43:24 SkyScan query 11:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:43:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:25 Parameters OK 11:43:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:25 Set A/D data flow result=40 11:43:25 Set A/D channel type result=40 11:43:25 Set A/D encoding result=40 11:43:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:25 Set channel filter=0.000000e+000 result=40 11:43:25 Config A/D Result=40 11:43:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:25 Get A/D filter: -9.255963e+061 result=40 11:43:25 Get A/D value=-858993460 result=40 11:43:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:25 Parameters OK 11:43:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:25 Set A/D data flow result=40 11:43:25 Set A/D channel type result=40 11:43:25 Set A/D encoding result=40 11:43:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:25 Set channel filter=0.000000e+000 result=40 11:43:25 Config A/D Result=40 11:43:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:25 Get A/D filter: -9.255963e+061 result=40 11:43:25 Get A/D value=-858993460 result=40 11:43:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:25 Aux= 11:43:25 Message to Camera, serial 275830 queued [UTC 2019-3-14 11:43:48] 11:44:02 Received message from Master: op=PointingHead serial=275843 11:44:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:44:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:44:02 Point started: ret=0 11:44:02 point_skyscan result=0 11:44:03 Check angles 11:44:03 SkyScan query 11:44:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:03 Message to Master queued w/err=0: serial=275843 error=0 11:44:08 Received message from Master: op=Filter serial=275844 11:44:08 Color wheel filter change from 0 to 0 11:44:08 FLIGetFilterPos err=0 currentPosition=0 11:44:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:08 Filter is already there-color wheel unchanged 11:44:08 Received message from Master: op=Shutter serial=275845 11:44:08 Shutter LASER close 11:44:08 Received message from Camera: op=State serial=275847 11:44:08 GetSingleValue result=40 Value=cccccccc 11:44:08 SkyScan query 11:44:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:09 Parameters OK 11:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:09 Set A/D data flow result=40 11:44:09 Set A/D channel type result=40 11:44:09 Set A/D encoding result=40 11:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:09 Set channel filter=0.000000e+000 result=40 11:44:09 Config A/D Result=40 11:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:09 Get A/D filter: -9.255963e+061 result=40 11:44:09 Get A/D value=-858993460 result=40 11:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:09 Parameters OK 11:44:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:09 Set A/D data flow result=40 11:44:09 Set A/D channel type result=40 11:44:09 Set A/D encoding result=40 11:44:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:09 Set channel filter=0.000000e+000 result=40 11:44:09 Config A/D Result=40 11:44:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:09 Get A/D filter: -9.255963e+061 result=40 11:44:09 Get A/D value=-858993460 result=40 11:44:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:09 Aux= 11:44:09 Message to Camera, serial 275847 queued 11:44:46 Received message from Master: op=PointingHead serial=275860 11:44:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:44:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:44:46 Point started: ret=0 11:44:46 point_skyscan result=0 11:44:47 Check angles 11:44:47 SkyScan query 11:44:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:44:47 Message to Master queued w/err=0: serial=275860 error=0 11:44:52 Received message from Master: op=Filter serial=275861 11:44:52 Color wheel filter change from 0 to 0 11:44:52 FLIGetFilterPos err=0 currentPosition=0 11:44:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:52 Filter is already there-color wheel unchanged 11:44:53 Received message from Master: op=Shutter serial=275862 11:44:53 Shutter LASER close 11:44:53 Received message from Camera: op=State serial=275864 11:44:53 GetSingleValue result=40 Value=cccccccc 11:44:53 SkyScan query 11:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:44:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:53 Parameters OK 11:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:53 Set A/D data flow result=40 11:44:53 Set A/D channel type result=40 11:44:53 Set A/D encoding result=40 11:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:53 Set channel filter=0.000000e+000 result=40 11:44:53 Config A/D Result=40 11:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:53 Get A/D filter: -9.255963e+061 result=40 11:44:53 Get A/D value=-858993460 result=40 11:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:53 Parameters OK 11:44:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:53 Set A/D data flow result=40 11:44:53 Set A/D channel type result=40 11:44:53 Set A/D encoding result=40 11:44:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:53 Set channel filter=0.000000e+000 result=40 11:44:53 Config A/D Result=40 11:44:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:53 Get A/D filter: -9.255963e+061 result=40 11:44:53 Get A/D value=-858993460 result=40 11:44:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:53 Aux= 11:44:53 Message to Camera, serial 275864 queued 11:45:29 Received message from Master: op=PointingHead serial=275876 11:45:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:45:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:45:30 Point started: ret=0 11:45:30 point_skyscan result=0 11:45:30 Check angles 11:45:30 SkyScan query 11:45:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.655<-13577 Statuses=0008 0009 11:45:31 Msec=0 True Az=112.995 Ze=-23.655 Az status=0008 Ze status=0009 11:45:31 Check angles 11:45:31 SkyScan query 11:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.625<-14975 Statuses=0008 0009 11:45:32 Msec=750 True Az=112.995 Ze=-44.625 Az status=0008 Ze status=0009 11:45:32 Check angles 11:45:32 SkyScan query 11:45:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.55<-16370 Statuses=0008 0009 11:45:32 Msec=1500 True Az=112.995 Ze=-65.55 Az status=0008 Ze status=0009 11:45:33 Check angles 11:45:33 SkyScan query 11:45:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.52<-17768 Statuses=0008 0009 11:45:33 Msec=2250 True Az=112.995 Ze=-86.52 Az status=0008 Ze status=0009 11:45:33 Check angles 11:45:33 SkyScan query 11:45:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 11:45:34 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 11:45:34 Check angles 11:45:34 SkyScan query 11:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.43<-20562 Statuses=0008 0009 11:45:35 Msec=3750 True Az=112.995 Ze=-128.43 Az status=0008 Ze status=0009 11:45:35 Check angles 11:45:35 SkyScan query 11:45:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.43<-21962 Statuses=0008 0009 11:45:35 Msec=4500 True Az=112.995 Ze=-149.43 Az status=0008 Ze status=0009 11:45:36 Check angles 11:45:36 SkyScan query 11:45:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.355<-23357 Statuses=0008 0009 11:45:36 Msec=5250 True Az=112.995 Ze=-170.355 Az status=0008 Ze status=0009 11:45:36 Check angles 11:45:36 SkyScan query 11:45:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:45:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:45:37 Message to Master queued w/err=0: serial=275876 error=0 11:45:42 Received message from Master: op=Filter serial=275877 11:45:42 Color wheel filter change from 0 to 0 11:45:42 FLIGetFilterPos err=0 currentPosition=0 11:45:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:42 Filter is already there-color wheel unchanged 11:45:42 Received message from Master: op=Shutter serial=275878 11:45:42 Shutter LASER open 11:45:42 Received message from Camera: op=State serial=275880 11:45:42 GetSingleValue result=40 Value=cccccccc 11:45:42 SkyScan query 11:45:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:45:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:43 Parameters OK 11:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:43 Set A/D data flow result=40 11:45:43 Set A/D channel type result=40 11:45:43 Set A/D encoding result=40 11:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:43 Set channel filter=0.000000e+000 result=40 11:45:43 Config A/D Result=40 11:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:43 Get A/D filter: -9.255963e+061 result=40 11:45:43 Get A/D value=-858993460 result=40 11:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:43 Parameters OK 11:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:43 Set A/D data flow result=40 11:45:43 Set A/D channel type result=40 11:45:43 Set A/D encoding result=40 11:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:43 Set channel filter=0.000000e+000 result=40 11:45:43 Config A/D Result=40 11:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:43 Get A/D filter: -9.255963e+061 result=40 11:45:43 Get A/D value=-858993460 result=40 11:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:43 Aux= 11:45:43 Message to Camera, serial 275880 queued 11:45:51 Received message from Master: op=Shutter serial=275890 11:45:51 Shutter LASER close 11:45:52 Received message from Master: op=PointingHead serial=275894 11:45:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:45:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:45:52 Point started: ret=0 11:45:52 point_skyscan result=0 11:45:53 Check angles 11:45:53 SkyScan query 11:45:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.115<-21541 Statuses=0008 0009 11:45:53 Msec=0 True Az=112.995 Ze=-143.115 Az status=0008 Ze status=0009 11:45:54 Check angles 11:45:54 SkyScan query 11:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.665<-20111 Statuses=0008 0009 11:45:54 Msec=750 True Az=112.995 Ze=-121.665 Az status=0008 Ze status=0009 11:45:54 Check angles 11:45:54 SkyScan query 11:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.755<-18717 Statuses=0008 0009 11:45:55 Msec=1500 True Az=112.995 Ze=-100.755 Az status=0008 Ze status=0009 11:45:55 Check angles 11:45:55 SkyScan query 11:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.77<-17318 Statuses=0008 0009 11:45:56 Msec=2250 True Az=112.995 Ze=-79.77 Az status=0008 Ze status=0009 11:45:56 Check angles 11:45:56 SkyScan query 11:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.83<-15922 Statuses=0008 0009 11:45:56 Msec=3000 True Az=112.995 Ze=-58.83 Az status=0008 Ze status=0009 11:45:57 Check angles 11:45:57 SkyScan query 11:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.845<-14523 Statuses=0008 0009 11:45:57 Msec=3750 True Az=112.995 Ze=-37.845 Az status=0008 Ze status=0009 11:45:57 Check angles 11:45:57 SkyScan query 11:45:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.89<-13126 Statuses=0008 0009 11:45:58 Msec=4500 True Az=112.995 Ze=-16.89 Az status=0008 Ze status=0009 11:45:58 Check angles 11:45:58 SkyScan query 11:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.05<-11730 Statuses=0008 0009 11:45:59 Msec=5250 True Az=112.995 Ze=4.05 Az status=0008 Ze status=0009 11:45:59 Check angles 11:45:59 SkyScan query 11:45:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:45:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:45:59 Message to Master queued w/err=0: serial=275894 error=0 11:46:04 Received message from Master: op=Filter serial=275895 11:46:04 Color wheel filter change from 0 to 0 11:46:04 FLIGetFilterPos err=0 currentPosition=0 11:46:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:04 Filter is already there-color wheel unchanged 11:46:05 Received message from Master: op=Shutter serial=275896 11:46:05 Shutter LASER close 11:46:05 Received message from Camera: op=State serial=275898 11:46:05 GetSingleValue result=40 Value=cccccccc 11:46:05 SkyScan query 11:46:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:05 Parameters OK 11:46:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:05 Set A/D data flow result=40 11:46:05 Set A/D channel type result=40 11:46:05 Set A/D encoding result=40 11:46:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:05 Set channel filter=0.000000e+000 result=40 11:46:05 Config A/D Result=40 11:46:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:05 Get A/D filter: -9.255963e+061 result=40 11:46:05 Get A/D value=-858993460 result=40 11:46:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:05 Parameters OK 11:46:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:05 Set A/D data flow result=40 11:46:05 Set A/D channel type result=40 11:46:05 Set A/D encoding result=40 11:46:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:05 Set channel filter=0.000000e+000 result=40 11:46:05 Config A/D Result=40 11:46:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:05 Get A/D filter: -9.255963e+061 result=40 11:46:05 Get A/D value=-858993460 result=40 11:46:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:05 Aux= 11:46:05 Message to Camera, serial 275898 queued 11:46:42 Received message from Master: op=PointingHead serial=275911 11:46:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:46:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:46:43 Point started: ret=0 11:46:43 point_skyscan result=0 11:46:43 Check angles 11:46:43 SkyScan query 11:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:46:44 Message to Master queued w/err=0: serial=275911 error=0 11:46:49 Received message from Master: op=Filter serial=275912 11:46:49 Color wheel filter change from 0 to 0 11:46:49 FLIGetFilterPos err=0 currentPosition=0 11:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:49 Filter is already there-color wheel unchanged 11:46:49 Received message from Master: op=Shutter serial=275913 11:46:49 Shutter LASER close 11:46:49 Received message from Camera: op=State serial=275915 11:46:49 GetSingleValue result=40 Value=cccccccc 11:46:49 SkyScan query 11:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:50 Parameters OK 11:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:50 Set A/D data flow result=40 11:46:50 Set A/D channel type result=40 11:46:50 Set A/D encoding result=40 11:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:50 Set channel filter=0.000000e+000 result=40 11:46:50 Config A/D Result=40 11:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:50 Get A/D filter: -9.255963e+061 result=40 11:46:50 Get A/D value=-858993460 result=40 11:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:50 Parameters OK 11:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:50 Set A/D data flow result=40 11:46:50 Set A/D channel type result=40 11:46:50 Set A/D encoding result=40 11:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:50 Set channel filter=0.000000e+000 result=40 11:46:50 Config A/D Result=40 11:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:50 Get A/D filter: -9.255963e+061 result=40 11:46:50 Get A/D value=-858993460 result=40 11:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:50 Aux= 11:46:50 Message to Camera, serial 275915 queued 11:47:27 Received message from Master: op=PointingHead serial=275928 11:47:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:47:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:47:27 Point started: ret=0 11:47:27 point_skyscan result=0 11:47:28 Check angles 11:47:28 SkyScan query 11:47:28 SkyScan query done: ret=0 az=135.84<-9056 ze=-6.51<-12434 Statuses=0009 0008 11:47:28 Msec=0 True Az=135.84 Ze=-6.51 Az status=0009 Ze status=0008 11:47:28 Check angles 11:47:28 SkyScan query 11:47:29 SkyScan query done: ret=0 az=153.735<-10249 ze=-6.495<-12433 Statuses=0009 0008 11:47:29 Msec=750 True Az=153.735 Ze=-6.495 Az status=0009 Ze status=0008 11:47:29 Check angles 11:47:29 SkyScan query 11:47:30 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 11:47:30 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 11:47:30 Check angles 11:47:30 SkyScan query 11:47:30 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:47:30 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:47:30 Message to Master queued w/err=0: serial=275928 error=0 11:47:35 Received message from Master: op=Filter serial=275929 11:47:35 Color wheel filter change from 0 to 0 11:47:35 FLIGetFilterPos err=0 currentPosition=0 11:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:35 Filter is already there-color wheel unchanged 11:47:36 Received message from Master: op=Shutter serial=275930 11:47:36 Shutter LASER close 11:47:36 Received message from Camera: op=State serial=275932 11:47:36 GetSingleValue result=40 Value=cccccccc 11:47:36 SkyScan query 11:47:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:36 Parameters OK 11:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:36 Set A/D data flow result=40 11:47:36 Set A/D channel type result=40 11:47:36 Set A/D encoding result=40 11:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:36 Set channel filter=0.000000e+000 result=40 11:47:36 Config A/D Result=40 11:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:36 Get A/D filter: -9.255963e+061 result=40 11:47:36 Get A/D value=-858993460 result=40 11:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:36 Parameters OK 11:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:36 Set A/D data flow result=40 11:47:36 Set A/D channel type result=40 11:47:36 Set A/D encoding result=40 11:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:36 Set channel filter=0.000000e+000 result=40 11:47:36 Config A/D Result=40 11:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:36 Get A/D filter: -9.255963e+061 result=40 11:47:36 Get A/D value=-858993460 result=40 11:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:36 Aux= 11:47:36 Message to Camera, serial 275932 queued 11:48:13 Received message from Master: op=PointingHead serial=275945 11:48:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:48:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:48:13 Point started: ret=0 11:48:13 point_skyscan result=0 11:48:14 Check angles 11:48:14 SkyScan query 11:48:15 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 11:48:15 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 11:48:15 Check angles 11:48:15 SkyScan query 11:48:16 SkyScan query done: ret=0 az=135.21<-9014 ze=6.495<-11567 Statuses=0009 0008 11:48:16 Msec=750 True Az=135.21 Ze=6.495 Az status=0009 Ze status=0008 11:48:16 Check angles 11:48:16 SkyScan query 11:48:16 SkyScan query done: ret=0 az=117.42<-7828 ze=6.495<-11567 Statuses=0009 0008 11:48:16 Msec=1500 True Az=117.42 Ze=6.495 Az status=0009 Ze status=0008 11:48:17 Check angles 11:48:17 SkyScan query 11:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:17 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:48:17 Message to Master queued w/err=0: serial=275945 error=0 11:48:22 Received message from Master: op=Filter serial=275946 11:48:22 Color wheel filter change from 0 to 0 11:48:22 FLIGetFilterPos err=0 currentPosition=0 11:48:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:22 Filter is already there-color wheel unchanged 11:48:22 Received message from Master: op=Shutter serial=275947 11:48:22 Shutter LASER close 11:48:22 Received message from Camera: op=State serial=275949 11:48:22 GetSingleValue result=40 Value=cccccccc 11:48:22 SkyScan query 11:48:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:48:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:23 Parameters OK 11:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:23 Set A/D data flow result=40 11:48:23 Set A/D channel type result=40 11:48:23 Set A/D encoding result=40 11:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:23 Set channel filter=0.000000e+000 result=40 11:48:23 Config A/D Result=40 11:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:23 Get A/D filter: -9.255963e+061 result=40 11:48:23 Get A/D value=-858993460 result=40 11:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:23 Parameters OK 11:48:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:23 Set A/D data flow result=40 11:48:23 Set A/D channel type result=40 11:48:23 Set A/D encoding result=40 11:48:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:23 Set channel filter=0.000000e+000 result=40 11:48:23 Config A/D Result=40 11:48:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:23 Get A/D filter: -9.255963e+061 result=40 11:48:23 Get A/D value=-858993460 result=40 11:48:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:23 Aux= 11:48:23 Message to Camera, serial 275949 queued 11:49:00 Received message from Master: op=PointingHead serial=275962 11:49:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:49:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:49:00 Point started: ret=0 11:49:00 point_skyscan result=0 11:49:01 Check angles 11:49:01 SkyScan query 11:49:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.22<-13548 Statuses=0008 0009 11:49:01 Msec=0 True Az=112.995 Ze=-23.22 Az status=0008 Ze status=0009 11:49:02 Check angles 11:49:02 SkyScan query 11:49:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 11:49:02 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 11:49:02 Check angles 11:49:02 SkyScan query 11:49:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.535<-16369 Statuses=0008 0009 11:49:03 Msec=1500 True Az=112.995 Ze=-65.535 Az status=0008 Ze status=0009 11:49:03 Check angles 11:49:03 SkyScan query 11:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.505<-17767 Statuses=0008 0009 11:49:04 Msec=2250 True Az=112.995 Ze=-86.505 Az status=0008 Ze status=0009 11:49:04 Check angles 11:49:04 SkyScan query 11:49:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.475<-19165 Statuses=0008 0009 11:49:04 Msec=3000 True Az=112.995 Ze=-107.475 Az status=0008 Ze status=0009 11:49:05 Check angles 11:49:05 SkyScan query 11:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.85<-20590 Statuses=0008 0009 11:49:05 Msec=3750 True Az=112.995 Ze=-128.85 Az status=0008 Ze status=0009 11:49:05 Check angles 11:49:05 SkyScan query 11:49:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.835<-21989 Statuses=0008 0009 11:49:06 Msec=4500 True Az=112.995 Ze=-149.835 Az status=0008 Ze status=0009 11:49:06 Check angles 11:49:06 SkyScan query 11:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.73<-23382 Statuses=0008 0009 11:49:07 Msec=5250 True Az=112.995 Ze=-170.73 Az status=0008 Ze status=0009 11:49:07 Check angles 11:49:07 SkyScan query 11:49:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:49:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:49:07 Message to Master queued w/err=0: serial=275962 error=0 11:49:12 Received message from Master: op=Filter serial=275963 11:49:12 Color wheel filter change from 0 to 0 11:49:12 FLIGetFilterPos err=0 currentPosition=0 11:49:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:12 Filter is already there-color wheel unchanged 11:49:13 Received message from Master: op=Shutter serial=275964 11:49:13 Shutter LASER open 11:49:13 Received message from Camera: op=State serial=275966 11:49:13 GetSingleValue result=40 Value=cccccccc 11:49:13 SkyScan query 11:49:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:49:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:13 Parameters OK 11:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:13 Set A/D data flow result=40 11:49:13 Set A/D channel type result=40 11:49:13 Set A/D encoding result=40 11:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:13 Set channel filter=0.000000e+000 result=40 11:49:13 Config A/D Result=40 11:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:13 Get A/D filter: -9.255963e+061 result=40 11:49:13 Get A/D value=-858993460 result=40 11:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:13 Parameters OK 11:49:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:13 Set A/D data flow result=40 11:49:13 Set A/D channel type result=40 11:49:13 Set A/D encoding result=40 11:49:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:13 Set channel filter=0.000000e+000 result=40 11:49:13 Config A/D Result=40 11:49:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:13 Get A/D filter: -9.255963e+061 result=40 11:49:13 Get A/D value=-858993460 result=40 11:49:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:13 Aux= 11:49:13 Message to Camera, serial 275966 queued 11:49:22 Received message from Master: op=Shutter serial=275976 11:49:22 Shutter LASER close 11:49:22 Received message from Master: op=PointingHead serial=275980 11:49:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:49:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:49:23 Point started: ret=0 11:49:23 point_skyscan result=0 11:49:23 Check angles 11:49:23 SkyScan query 11:49:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.055<-21537 Statuses=0008 0009 11:49:24 Msec=0 True Az=112.995 Ze=-143.055 Az status=0008 Ze status=0009 11:49:24 Check angles 11:49:24 SkyScan query 11:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.085<-20139 Statuses=0008 0009 11:49:25 Msec=750 True Az=112.995 Ze=-122.085 Az status=0008 Ze status=0009 11:49:25 Check angles 11:49:25 SkyScan query 11:49:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.71<-18714 Statuses=0008 0009 11:49:25 Msec=1500 True Az=112.995 Ze=-100.71 Az status=0008 Ze status=0009 11:49:26 Check angles 11:49:26 SkyScan query 11:49:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.74<-17316 Statuses=0008 0009 11:49:26 Msec=2250 True Az=112.995 Ze=-79.74 Az status=0008 Ze status=0009 11:49:26 Check angles 11:49:26 SkyScan query 11:49:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 11:49:27 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 11:49:27 Check angles 11:49:27 SkyScan query 11:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.41<-14494 Statuses=0008 0009 11:49:28 Msec=3750 True Az=112.995 Ze=-37.41 Az status=0008 Ze status=0009 11:49:28 Check angles 11:49:28 SkyScan query 11:49:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.41<-13094 Statuses=0008 0009 11:49:28 Msec=4500 True Az=112.995 Ze=-16.41 Az status=0008 Ze status=0009 11:49:29 Check angles 11:49:29 SkyScan query 11:49:29 SkyScan query done: ret=0 az=113.01<-7534 ze=4.425<-11705 Statuses=0008 0009 11:49:29 Msec=5250 True Az=113.01 Ze=4.425 Az status=0008 Ze status=0009 11:49:29 Check angles 11:49:29 SkyScan query 11:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:49:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:49:30 Message to Master queued w/err=0: serial=275980 error=0 11:49:35 Received message from Master: op=Filter serial=275981 11:49:35 Color wheel filter change from 0 to 0 11:49:35 FLIGetFilterPos err=0 currentPosition=0 11:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:35 Filter is already there-color wheel unchanged 11:49:35 Received message from Master: op=Shutter serial=275982 11:49:35 Shutter LASER close 11:49:35 Received message from Camera: op=State serial=275984 11:49:35 GetSingleValue result=40 Value=cccccccc 11:49:35 SkyScan query 11:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:49:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:36 Parameters OK 11:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:36 Set A/D data flow result=40 11:49:36 Set A/D channel type result=40 11:49:36 Set A/D encoding result=40 11:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:36 Set channel filter=0.000000e+000 result=40 11:49:36 Config A/D Result=40 11:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:36 Get A/D filter: -9.255963e+061 result=40 11:49:36 Get A/D value=-858993460 result=40 11:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:36 Parameters OK 11:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:36 Set A/D data flow result=40 11:49:36 Set A/D channel type result=40 11:49:36 Set A/D encoding result=40 11:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:36 Set channel filter=0.000000e+000 result=40 11:49:36 Config A/D Result=40 11:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:36 Get A/D filter: -9.255963e+061 result=40 11:49:36 Get A/D value=-858993460 result=40 11:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:36 Aux= 11:49:36 Message to Camera, serial 275984 queued 11:50:13 Received message from Master: op=PointingHead serial=275997 11:50:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:13 Point started: ret=0 11:50:13 point_skyscan result=0 11:50:14 Check angles 11:50:14 SkyScan query 11:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:50:14 Message to Master queued w/err=0: serial=275997 error=0 11:50:19 Received message from Master: op=Filter serial=275998 11:50:19 Color wheel filter change from 0 to 0 11:50:19 FLIGetFilterPos err=0 currentPosition=0 11:50:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:19 Filter is already there-color wheel unchanged 11:50:20 Received message from Master: op=Shutter serial=275999 11:50:20 Shutter LASER close 11:50:20 Received message from Camera: op=State serial=276001 11:50:20 GetSingleValue result=40 Value=cccccccc 11:50:20 SkyScan query 11:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:20 Parameters OK 11:50:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:20 Set A/D data flow result=40 11:50:20 Set A/D channel type result=40 11:50:20 Set A/D encoding result=40 11:50:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:20 Set channel filter=0.000000e+000 result=40 11:50:20 Config A/D Result=40 11:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:20 Get A/D filter: -9.255963e+061 result=40 11:50:20 Get A/D value=-858993460 result=40 11:50:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:20 Parameters OK 11:50:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:20 Set A/D data flow result=40 11:50:20 Set A/D channel type result=40 11:50:20 Set A/D encoding result=40 11:50:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:20 Set channel filter=0.000000e+000 result=40 11:50:20 Config A/D Result=40 11:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:20 Get A/D filter: -9.255963e+061 result=40 11:50:20 Get A/D value=-858993460 result=40 11:50:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:20 Aux= 11:50:20 Message to Camera, serial 276001 queued 11:50:57 Received message from Master: op=PointingHead serial=276014 11:50:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:50:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:50:57 Point started: ret=0 11:50:57 point_skyscan result=0 11:50:58 Check angles 11:50:58 SkyScan query 11:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:50:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:50:59 Message to Master queued w/err=0: serial=276014 error=0 11:51:04 Received message from Master: op=Filter serial=276015 11:51:04 Color wheel filter change from 0 to 0 11:51:04 FLIGetFilterPos err=0 currentPosition=0 11:51:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:04 Filter is already there-color wheel unchanged 11:51:04 Received message from Master: op=Shutter serial=276016 11:51:04 Shutter LASER close 11:51:04 Received message from Camera: op=State serial=276018 11:51:04 GetSingleValue result=40 Value=cccccccc 11:51:04 SkyScan query 11:51:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:04 Parameters OK 11:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:04 Set A/D data flow result=40 11:51:04 Set A/D channel type result=40 11:51:04 Set A/D encoding result=40 11:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:04 Set channel filter=0.000000e+000 result=40 11:51:04 Config A/D Result=40 11:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:04 Get A/D filter: -9.255963e+061 result=40 11:51:04 Get A/D value=-858993460 result=40 11:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:04 Parameters OK 11:51:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:04 Set A/D data flow result=40 11:51:04 Set A/D channel type result=40 11:51:04 Set A/D encoding result=40 11:51:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:04 Set channel filter=0.000000e+000 result=40 11:51:04 Config A/D Result=40 11:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:04 Get A/D filter: -9.255963e+061 result=40 11:51:04 Get A/D value=-858993460 result=40 11:51:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:04 Aux= 11:51:04 Message to Camera, serial 276018 queued 11:51:41 Received message from Master: op=PointingHead serial=276031 11:51:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:51:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:51:42 Point started: ret=0 11:51:42 point_skyscan result=0 11:51:42 Check angles 11:51:42 SkyScan query 11:51:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:51:43 Message to Master queued w/err=0: serial=276031 error=0 11:51:48 Received message from Master: op=Filter serial=276032 11:51:48 Color wheel filter change from 0 to 0 11:51:48 FLIGetFilterPos err=0 currentPosition=0 11:51:48 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:48 Filter is already there-color wheel unchanged 11:51:48 Received message from Master: op=Shutter serial=276033 11:51:48 Shutter LASER close 11:51:48 Received message from Camera: op=State serial=276035 11:51:48 GetSingleValue result=40 Value=cccccccc 11:51:48 SkyScan query 11:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:51:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:49 Parameters OK 11:51:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:49 Set A/D data flow result=40 11:51:49 Set A/D channel type result=40 11:51:49 Set A/D encoding result=40 11:51:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:49 Set channel filter=0.000000e+000 result=40 11:51:49 Config A/D Result=40 11:51:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:49 Get A/D filter: -9.255963e+061 result=40 11:51:49 Get A/D value=-858993460 result=40 11:51:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:49 Parameters OK 11:51:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:49 Set A/D data flow result=40 11:51:49 Set A/D channel type result=40 11:51:49 Set A/D encoding result=40 11:51:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:49 Set channel filter=0.000000e+000 result=40 11:51:49 Config A/D Result=40 11:51:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:49 Get A/D filter: -9.255963e+061 result=40 11:51:49 Get A/D value=-858993460 result=40 11:51:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:49 Aux= 11:51:49 Message to Camera, serial 276035 queued 11:52:26 Received message from Master: op=PointingHead serial=276048 11:52:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:52:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:52:26 Point started: ret=0 11:52:26 point_skyscan result=0 11:52:27 Check angles 11:52:27 SkyScan query 11:52:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.835<-13589 Statuses=0008 0009 11:52:27 Msec=0 True Az=112.995 Ze=-23.835 Az status=0008 Ze status=0009 11:52:27 Check angles 11:52:27 SkyScan query 11:52:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.21<-15014 Statuses=0008 0009 11:52:28 Msec=750 True Az=112.995 Ze=-45.21 Az status=0008 Ze status=0009 11:52:28 Check angles 11:52:28 SkyScan query 11:52:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.195<-16413 Statuses=0008 0009 11:52:29 Msec=1500 True Az=112.995 Ze=-66.195 Az status=0008 Ze status=0009 11:52:29 Check angles 11:52:29 SkyScan query 11:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.165<-17811 Statuses=0008 0009 11:52:30 Msec=2250 True Az=112.995 Ze=-87.165 Az status=0008 Ze status=0009 11:52:30 Check angles 11:52:30 SkyScan query 11:52:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.525<-19235 Statuses=0008 0009 11:52:30 Msec=3000 True Az=112.995 Ze=-108.525 Az status=0008 Ze status=0009 11:52:31 Check angles 11:52:31 SkyScan query 11:52:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.9<-20660 Statuses=0008 0009 11:52:31 Msec=3750 True Az=112.995 Ze=-129.9 Az status=0008 Ze status=0009 11:52:31 Check angles 11:52:31 SkyScan query 11:52:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.825<-22055 Statuses=0008 0009 11:52:32 Msec=4500 True Az=112.995 Ze=-150.825 Az status=0008 Ze status=0009 11:52:32 Check angles 11:52:32 SkyScan query 11:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.495<-23433 Statuses=0008 0009 11:52:33 Msec=5250 True Az=112.995 Ze=-171.495 Az status=0008 Ze status=0009 11:52:33 Check angles 11:52:33 SkyScan query 11:52:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:52:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:52:33 Message to Master queued w/err=0: serial=276048 error=0 11:52:38 Received message from Master: op=Filter serial=276049 11:52:38 Color wheel filter change from 0 to 0 11:52:38 FLIGetFilterPos err=0 currentPosition=0 11:52:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:38 Filter is already there-color wheel unchanged 11:52:39 Received message from Master: op=Shutter serial=276050 11:52:39 Shutter LASER open 11:52:39 Received message from Camera: op=State serial=276052 11:52:39 GetSingleValue result=40 Value=cccccccc 11:52:39 SkyScan query 11:52:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:39 Parameters OK 11:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:39 Set A/D data flow result=40 11:52:39 Set A/D channel type result=40 11:52:39 Set A/D encoding result=40 11:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:39 Set channel filter=0.000000e+000 result=40 11:52:39 Config A/D Result=40 11:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:39 Get A/D filter: -9.255963e+061 result=40 11:52:39 Get A/D value=-858993460 result=40 11:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:39 Parameters OK 11:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:39 Set A/D data flow result=40 11:52:39 Set A/D channel type result=40 11:52:39 Set A/D encoding result=40 11:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:39 Set channel filter=0.000000e+000 result=40 11:52:39 Config A/D Result=40 11:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:39 Get A/D filter: -9.255963e+061 result=40 11:52:39 Get A/D value=-858993460 result=40 11:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:39 Aux= 11:52:39 Message to Camera, serial 276052 queued 11:52:48 Received message from Master: op=Shutter serial=276062 11:52:48 Shutter LASER close 11:52:48 Received message from Master: op=PointingHead serial=276066 11:52:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:52:48 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:52:49 Point started: ret=0 11:52:49 point_skyscan result=0 11:52:49 Check angles 11:52:49 SkyScan query 11:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 11:52:50 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 11:52:50 Check angles 11:52:50 SkyScan query 11:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.325<-20155 Statuses=0008 0009 11:52:51 Msec=750 True Az=112.995 Ze=-122.325 Az status=0008 Ze status=0009 11:52:51 Check angles 11:52:51 SkyScan query 11:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.385<-18759 Statuses=0008 0009 11:52:51 Msec=1500 True Az=112.995 Ze=-101.385 Az status=0008 Ze status=0009 11:52:52 Check angles 11:52:52 SkyScan query 11:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.415<-17361 Statuses=0008 0009 11:52:52 Msec=2250 True Az=112.995 Ze=-80.415 Az status=0008 Ze status=0009 11:52:52 Check angles 11:52:52 SkyScan query 11:52:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.475<-15965 Statuses=0008 0009 11:52:53 Msec=3000 True Az=112.995 Ze=-59.475 Az status=0008 Ze status=0009 11:52:53 Check angles 11:52:53 SkyScan query 11:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.505<-14567 Statuses=0008 0009 11:52:54 Msec=3750 True Az=112.995 Ze=-38.505 Az status=0008 Ze status=0009 11:52:54 Check angles 11:52:54 SkyScan query 11:52:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.565<-13171 Statuses=0008 0009 11:52:54 Msec=4500 True Az=112.995 Ze=-17.565 Az status=0008 Ze status=0009 11:52:55 Check angles 11:52:55 SkyScan query 11:52:55 SkyScan query done: ret=0 az=112.995<-7533 ze=3.435<-11771 Statuses=0008 0009 11:52:55 Msec=5250 True Az=112.995 Ze=3.435 Az status=0008 Ze status=0009 11:52:55 Check angles 11:52:55 SkyScan query 11:52:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:52:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:52:56 Message to Master queued w/err=0: serial=276066 error=0 11:53:01 Received message from Master: op=Filter serial=276067 11:53:01 Color wheel filter change from 0 to 0 11:53:01 FLIGetFilterPos err=0 currentPosition=0 11:53:01 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:01 Filter is already there-color wheel unchanged 11:53:01 Received message from Master: op=Shutter serial=276068 11:53:01 Shutter LASER close 11:53:01 Received message from Camera: op=State serial=276070 11:53:01 GetSingleValue result=40 Value=cccccccc 11:53:01 SkyScan query 11:53:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:02 Parameters OK 11:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:02 Set A/D data flow result=40 11:53:02 Set A/D channel type result=40 11:53:02 Set A/D encoding result=40 11:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:02 Set channel filter=0.000000e+000 result=40 11:53:02 Config A/D Result=40 11:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:02 Get A/D filter: -9.255963e+061 result=40 11:53:02 Get A/D value=-858993460 result=40 11:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:02 Parameters OK 11:53:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:02 Set A/D data flow result=40 11:53:02 Set A/D channel type result=40 11:53:02 Set A/D encoding result=40 11:53:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:02 Set channel filter=0.000000e+000 result=40 11:53:02 Config A/D Result=40 11:53:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:02 Get A/D filter: -9.255963e+061 result=40 11:53:02 Get A/D value=-858993460 result=40 11:53:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:02 Aux= 11:53:02 Message to Camera, serial 276070 queued 11:53:38 Received message from Master: op=PointingHead serial=276082 11:53:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:53:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:53:38 Point started: ret=0 11:53:38 point_skyscan result=0 11:53:39 Check angles 11:53:39 SkyScan query 11:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:53:39 Message to Master queued w/err=0: serial=276082 error=0 11:53:44 Received message from Master: op=Filter serial=276083 11:53:44 Color wheel filter change from 0 to 0 11:53:44 FLIGetFilterPos err=0 currentPosition=0 11:53:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:44 Filter is already there-color wheel unchanged 11:53:45 Received message from Master: op=Shutter serial=276084 11:53:45 Shutter LASER close 11:53:45 Received message from Camera: op=State serial=276086 11:53:45 GetSingleValue result=40 Value=cccccccc 11:53:45 SkyScan query 11:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:53:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:45 Parameters OK 11:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:45 Set A/D data flow result=40 11:53:45 Set A/D channel type result=40 11:53:45 Set A/D encoding result=40 11:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:45 Set channel filter=0.000000e+000 result=40 11:53:45 Config A/D Result=40 11:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:45 Get A/D filter: -9.255963e+061 result=40 11:53:45 Get A/D value=-858993460 result=40 11:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:45 Parameters OK 11:53:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:45 Set A/D data flow result=40 11:53:45 Set A/D channel type result=40 11:53:45 Set A/D encoding result=40 11:53:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:45 Set channel filter=0.000000e+000 result=40 11:53:45 Config A/D Result=40 11:53:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:45 Get A/D filter: -9.255963e+061 result=40 11:53:45 Get A/D value=-858993460 result=40 11:53:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:45 Aux= 11:53:45 Message to Camera, serial 276086 queued 11:54:22 Received message from Master: op=PointingHead serial=276099 11:54:22 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 11:54:22 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 11:54:22 Point started: ret=0 11:54:22 point_skyscan result=0 11:54:23 Check angles 11:54:23 SkyScan query 11:54:24 SkyScan query done: ret=0 az=135.825<-9055 ze=-6.51<-12434 Statuses=0009 0008 11:54:24 Msec=0 True Az=135.825 Ze=-6.51 Az status=0009 Ze status=0008 11:54:24 Check angles 11:54:24 SkyScan query 11:54:25 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 [UTC 2019-3-14 11:54:25] 11:54:25 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 11:54:25 Check angles 11:54:25 SkyScan query 11:54:25 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 11:54:25 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 11:54:25 Check angles 11:54:25 SkyScan query 11:54:26 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 11:54:26 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 11:54:26 Message to Master queued w/err=0: serial=276099 error=0 11:54:31 Received message from Master: op=Filter serial=276100 11:54:31 Color wheel filter change from 0 to 0 11:54:31 FLIGetFilterPos err=0 currentPosition=0 11:54:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:31 Filter is already there-color wheel unchanged 11:54:31 Received message from Master: op=Shutter serial=276101 11:54:31 Shutter LASER close 11:54:31 Received message from Camera: op=State serial=276103 11:54:31 GetSingleValue result=40 Value=cccccccc 11:54:31 SkyScan query 11:54:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 11:54:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:32 Parameters OK 11:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:32 Set A/D data flow result=40 11:54:32 Set A/D channel type result=40 11:54:32 Set A/D encoding result=40 11:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:32 Set channel filter=0.000000e+000 result=40 11:54:32 Config A/D Result=40 11:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:32 Get A/D filter: -9.255963e+061 result=40 11:54:32 Get A/D value=-858993460 result=40 11:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:32 Parameters OK 11:54:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:32 Set A/D data flow result=40 11:54:32 Set A/D channel type result=40 11:54:32 Set A/D encoding result=40 11:54:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:32 Set channel filter=0.000000e+000 result=40 11:54:32 Config A/D Result=40 11:54:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:32 Get A/D filter: -9.255963e+061 result=40 11:54:32 Get A/D value=-858993460 result=40 11:54:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:32 Aux= 11:54:32 Message to Camera, serial 276103 queued 11:55:09 Received message from Master: op=PointingHead serial=276116 11:55:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:55:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:55:09 Point started: ret=0 11:55:09 point_skyscan result=0 11:55:10 Check angles 11:55:10 SkyScan query 11:55:10 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 11:55:10 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 11:55:11 Check angles 11:55:11 SkyScan query 11:55:11 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 11:55:11 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 11:55:11 Check angles 11:55:11 SkyScan query 11:55:12 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 11:55:12 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 11:55:12 Check angles 11:55:12 SkyScan query 11:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:55:13 Message to Master queued w/err=0: serial=276116 error=0 11:55:18 Received message from Master: op=Filter serial=276117 11:55:18 Color wheel filter change from 0 to 0 11:55:18 FLIGetFilterPos err=0 currentPosition=0 11:55:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:18 Filter is already there-color wheel unchanged 11:55:18 Received message from Master: op=Shutter serial=276118 11:55:18 Shutter LASER close 11:55:18 Received message from Camera: op=State serial=276120 11:55:18 GetSingleValue result=40 Value=cccccccc 11:55:18 SkyScan query 11:55:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:55:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:18 Parameters OK 11:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:18 Set A/D data flow result=40 11:55:18 Set A/D channel type result=40 11:55:18 Set A/D encoding result=40 11:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:18 Set channel filter=0.000000e+000 result=40 11:55:18 Config A/D Result=40 11:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:18 Get A/D filter: -9.255963e+061 result=40 11:55:18 Get A/D value=-858993460 result=40 11:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:18 Parameters OK 11:55:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:18 Set A/D data flow result=40 11:55:18 Set A/D channel type result=40 11:55:18 Set A/D encoding result=40 11:55:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:18 Set channel filter=0.000000e+000 result=40 11:55:18 Config A/D Result=40 11:55:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:18 Get A/D filter: -9.255963e+061 result=40 11:55:18 Get A/D value=-858993460 result=40 11:55:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:18 Aux= 11:55:18 Message to Camera, serial 276120 queued 11:55:55 Received message from Master: op=PointingHead serial=276133 11:55:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:55:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:55:56 Point started: ret=0 11:55:56 point_skyscan result=0 11:55:56 Check angles 11:55:56 SkyScan query 11:55:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.055<-13537 Statuses=0008 0009 11:55:57 Msec=0 True Az=112.995 Ze=-23.055 Az status=0008 Ze status=0009 11:55:57 Check angles 11:55:57 SkyScan query 11:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.4<-14960 Statuses=0008 0009 11:55:58 Msec=750 True Az=112.995 Ze=-44.4 Az status=0008 Ze status=0009 11:55:58 Check angles 11:55:58 SkyScan query 11:55:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.445<-16363 Statuses=0008 0009 11:55:58 Msec=1500 True Az=112.995 Ze=-65.445 Az status=0008 Ze status=0009 11:55:59 Check angles 11:55:59 SkyScan query 11:55:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 11:55:59 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 11:55:59 Check angles 11:55:59 SkyScan query 11:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 11:56:00 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 11:56:00 Check angles 11:56:00 SkyScan query 11:56:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.655<-20577 Statuses=0008 0009 11:56:01 Msec=3750 True Az=112.995 Ze=-128.655 Az status=0008 Ze status=0009 11:56:01 Check angles 11:56:01 SkyScan query 11:56:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 11:56:01 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 11:56:02 Check angles 11:56:02 SkyScan query 11:56:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.91<-23394 Statuses=0008 0009 11:56:02 Msec=5250 True Az=112.995 Ze=-170.91 Az status=0008 Ze status=0009 11:56:02 Check angles 11:56:02 SkyScan query 11:56:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:56:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:56:03 Message to Master queued w/err=0: serial=276133 error=0 11:56:08 Received message from Master: op=Filter serial=276134 11:56:08 Color wheel filter change from 0 to 0 11:56:08 FLIGetFilterPos err=0 currentPosition=0 11:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:08 Filter is already there-color wheel unchanged 11:56:08 Received message from Master: op=Shutter serial=276135 11:56:08 Shutter LASER open 11:56:08 Received message from Camera: op=State serial=276137 11:56:08 GetSingleValue result=40 Value=cccccccc 11:56:08 SkyScan query 11:56:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:56:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:09 Parameters OK 11:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:09 Set A/D data flow result=40 11:56:09 Set A/D channel type result=40 11:56:09 Set A/D encoding result=40 11:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:09 Set channel filter=0.000000e+000 result=40 11:56:09 Config A/D Result=40 11:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:09 Get A/D filter: -9.255963e+061 result=40 11:56:09 Get A/D value=-858993460 result=40 11:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:09 Parameters OK 11:56:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:09 Set A/D data flow result=40 11:56:09 Set A/D channel type result=40 11:56:09 Set A/D encoding result=40 11:56:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:09 Set channel filter=0.000000e+000 result=40 11:56:09 Config A/D Result=40 11:56:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:09 Get A/D filter: -9.255963e+061 result=40 11:56:09 Get A/D value=-858993460 result=40 11:56:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:09 Aux= 11:56:09 Message to Camera, serial 276137 queued 11:56:17 Received message from Master: op=Shutter serial=276147 11:56:17 Shutter LASER close 11:56:18 Received message from Master: op=PointingHead serial=276151 11:56:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:56:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:56:18 Point started: ret=0 11:56:18 point_skyscan result=0 11:56:19 Check angles 11:56:19 SkyScan query 11:56:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 11:56:19 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 11:56:20 Check angles 11:56:20 SkyScan query 11:56:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.34<-20156 Statuses=0008 0009 11:56:20 Msec=750 True Az=112.995 Ze=-122.34 Az status=0008 Ze status=0009 11:56:20 Check angles 11:56:20 SkyScan query 11:56:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.4<-18760 Statuses=0008 0009 11:56:21 Msec=1500 True Az=112.995 Ze=-101.4 Az status=0008 Ze status=0009 11:56:21 Check angles 11:56:21 SkyScan query 11:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.43<-17362 Statuses=0008 0009 11:56:22 Msec=2250 True Az=112.995 Ze=-80.43 Az status=0008 Ze status=0009 11:56:22 Check angles 11:56:22 SkyScan query 11:56:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 11:56:22 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 11:56:23 Check angles 11:56:23 SkyScan query 11:56:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 11:56:23 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 11:56:23 Check angles 11:56:23 SkyScan query 11:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.07<-13138 Statuses=0008 0009 11:56:24 Msec=4500 True Az=112.995 Ze=-17.07 Az status=0008 Ze status=0009 11:56:24 Check angles 11:56:24 SkyScan query 11:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=3.9<-11740 Statuses=0008 0009 11:56:25 Msec=5250 True Az=112.995 Ze=3.9 Az status=0008 Ze status=0009 11:56:25 Check angles 11:56:25 SkyScan query 11:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:56:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:56:25 Message to Master queued w/err=0: serial=276151 error=0 11:56:30 Received message from Master: op=Filter serial=276152 11:56:30 Color wheel filter change from 0 to 0 11:56:30 FLIGetFilterPos err=0 currentPosition=0 11:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:30 Filter is already there-color wheel unchanged 11:56:31 Received message from Master: op=Shutter serial=276153 11:56:31 Shutter LASER close 11:56:31 Received message from Camera: op=State serial=276155 11:56:31 GetSingleValue result=40 Value=cccccccc 11:56:31 SkyScan query 11:56:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:31 Parameters OK 11:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:31 Set A/D data flow result=40 11:56:31 Set A/D channel type result=40 11:56:31 Set A/D encoding result=40 11:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:31 Set channel filter=0.000000e+000 result=40 11:56:31 Config A/D Result=40 11:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:31 Get A/D filter: -9.255963e+061 result=40 11:56:31 Get A/D value=-858993460 result=40 11:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:31 Parameters OK 11:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:31 Set A/D data flow result=40 11:56:31 Set A/D channel type result=40 11:56:31 Set A/D encoding result=40 11:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:31 Set channel filter=0.000000e+000 result=40 11:56:31 Config A/D Result=40 11:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:31 Get A/D filter: -9.255963e+061 result=40 11:56:31 Get A/D value=-858993460 result=40 11:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:31 Aux= 11:56:31 Message to Camera, serial 276155 queued 11:57:08 Received message from Master: op=PointingHead serial=276168 11:57:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:09 Point started: ret=0 11:57:09 point_skyscan result=0 11:57:09 Check angles 11:57:09 SkyScan query 11:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:10 Message to Master queued w/err=0: serial=276168 error=0 11:57:15 Received message from Master: op=Filter serial=276169 11:57:15 Color wheel filter change from 0 to 0 11:57:15 FLIGetFilterPos err=0 currentPosition=0 11:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:15 Filter is already there-color wheel unchanged 11:57:15 Received message from Master: op=Shutter serial=276170 11:57:15 Shutter LASER close 11:57:15 Received message from Camera: op=State serial=276172 11:57:15 GetSingleValue result=40 Value=cccccccc 11:57:15 SkyScan query 11:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:16 Parameters OK 11:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:16 Set A/D data flow result=40 11:57:16 Set A/D channel type result=40 11:57:16 Set A/D encoding result=40 11:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:16 Set channel filter=0.000000e+000 result=40 11:57:16 Config A/D Result=40 11:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:16 Get A/D filter: -9.255963e+061 result=40 11:57:16 Get A/D value=-858993460 result=40 11:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:16 Parameters OK 11:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:16 Set A/D data flow result=40 11:57:16 Set A/D channel type result=40 11:57:16 Set A/D encoding result=40 11:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:16 Set channel filter=0.000000e+000 result=40 11:57:16 Config A/D Result=40 11:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:16 Get A/D filter: -9.255963e+061 result=40 11:57:16 Get A/D value=-858993460 result=40 11:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:16 Aux= 11:57:16 Message to Camera, serial 276172 queued 11:57:53 Received message from Master: op=PointingHead serial=276185 11:57:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:57:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:57:53 Point started: ret=0 11:57:53 point_skyscan result=0 11:57:54 Check angles 11:57:54 SkyScan query 11:57:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:57:54 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:57:54 Message to Master queued w/err=0: serial=276185 error=0 11:57:59 Received message from Master: op=Filter serial=276186 11:57:59 Color wheel filter change from 0 to 0 11:57:59 FLIGetFilterPos err=0 currentPosition=0 11:57:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:59 Filter is already there-color wheel unchanged 11:57:59 Received message from Master: op=Shutter serial=276187 11:57:59 Shutter LASER close 11:57:59 Received message from Camera: op=State serial=276189 11:57:59 GetSingleValue result=40 Value=cccccccc 11:57:59 SkyScan query 11:58:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:00 Parameters OK 11:58:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:00 Set A/D data flow result=40 11:58:00 Set A/D channel type result=40 11:58:00 Set A/D encoding result=40 11:58:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:00 Set channel filter=0.000000e+000 result=40 11:58:00 Config A/D Result=40 11:58:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:00 Get A/D filter: -9.255963e+061 result=40 11:58:00 Get A/D value=-858993460 result=40 11:58:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:00 Parameters OK 11:58:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:00 Set A/D data flow result=40 11:58:00 Set A/D channel type result=40 11:58:00 Set A/D encoding result=40 11:58:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:00 Set channel filter=0.000000e+000 result=40 11:58:00 Config A/D Result=40 11:58:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:00 Get A/D filter: -9.255963e+061 result=40 11:58:00 Get A/D value=-858993460 result=40 11:58:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:00 Aux= 11:58:00 Message to Camera, serial 276189 queued 11:58:36 Received message from Master: op=PointingHead serial=276201 11:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:58:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:58:36 Point started: ret=0 11:58:36 point_skyscan result=0 11:58:37 Check angles 11:58:37 SkyScan query 11:58:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:38 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 11:58:38 Message to Master queued w/err=0: serial=276201 error=0 11:58:43 Received message from Master: op=Filter serial=276202 11:58:43 Color wheel filter change from 0 to 0 11:58:43 FLIGetFilterPos err=0 currentPosition=0 11:58:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:43 Filter is already there-color wheel unchanged 11:58:43 Received message from Master: op=Shutter serial=276203 11:58:43 Shutter LASER close 11:58:43 Received message from Camera: op=State serial=276205 11:58:43 GetSingleValue result=40 Value=cccccccc 11:58:43 SkyScan query 11:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:58:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:43 Parameters OK 11:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:43 Set A/D data flow result=40 11:58:43 Set A/D channel type result=40 11:58:43 Set A/D encoding result=40 11:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:43 Set channel filter=0.000000e+000 result=40 11:58:43 Config A/D Result=40 11:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:43 Get A/D filter: -9.255963e+061 result=40 11:58:43 Get A/D value=-858993460 result=40 11:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:43 Parameters OK 11:58:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:43 Set A/D data flow result=40 11:58:43 Set A/D channel type result=40 11:58:43 Set A/D encoding result=40 11:58:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:43 Set channel filter=0.000000e+000 result=40 11:58:43 Config A/D Result=40 11:58:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:43 Get A/D filter: -9.255963e+061 result=40 11:58:43 Get A/D value=-858993460 result=40 11:58:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:43 Aux= 11:58:43 Message to Camera, serial 276205 queued 11:59:20 Received message from Master: op=PointingHead serial=276218 11:59:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:59:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:59:21 Point started: ret=0 11:59:21 point_skyscan result=0 11:59:21 Check angles 11:59:21 SkyScan query 11:59:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 11:59:22 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 11:59:22 Check angles 11:59:22 SkyScan query 11:59:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.19<-14946 Statuses=0008 0009 11:59:23 Msec=750 True Az=112.995 Ze=-44.19 Az status=0008 Ze status=0009 11:59:23 Check angles 11:59:23 SkyScan query 11:59:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.115<-16341 Statuses=0008 0009 11:59:23 Msec=1500 True Az=112.995 Ze=-65.115 Az status=0008 Ze status=0009 11:59:24 Check angles 11:59:24 SkyScan query 11:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.055<-17737 Statuses=0008 0009 11:59:24 Msec=2250 True Az=112.995 Ze=-86.055 Az status=0008 Ze status=0009 11:59:24 Check angles 11:59:24 SkyScan query 11:59:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.995<-19133 Statuses=0008 0009 11:59:25 Msec=3000 True Az=112.995 Ze=-106.995 Az status=0008 Ze status=0009 11:59:25 Check angles 11:59:25 SkyScan query 11:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.965<-20531 Statuses=0008 0009 11:59:26 Msec=3750 True Az=112.995 Ze=-127.965 Az status=0008 Ze status=0009 11:59:26 Check angles 11:59:26 SkyScan query 11:59:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.905<-21927 Statuses=0008 0009 11:59:26 Msec=4500 True Az=112.995 Ze=-148.905 Az status=0008 Ze status=0009 11:59:27 Check angles 11:59:27 SkyScan query 11:59:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.86<-23324 Statuses=0008 0009 11:59:27 Msec=5250 True Az=112.995 Ze=-169.86 Az status=0008 Ze status=0009 11:59:27 Check angles 11:59:27 SkyScan query 11:59:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:59:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:59:28 Message to Master queued w/err=0: serial=276218 error=0 11:59:33 Received message from Master: op=Filter serial=276219 11:59:33 Color wheel filter change from 0 to 0 11:59:33 FLIGetFilterPos err=0 currentPosition=0 11:59:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:33 Filter is already there-color wheel unchanged 11:59:33 Received message from Master: op=Shutter serial=276220 11:59:33 Shutter LASER open 11:59:33 Received message from Camera: op=State serial=276222 11:59:33 GetSingleValue result=40 Value=cccccccc 11:59:33 SkyScan query 11:59:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:59:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:34 Parameters OK 11:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:34 Set A/D data flow result=40 11:59:34 Set A/D channel type result=40 11:59:34 Set A/D encoding result=40 11:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:34 Set channel filter=0.000000e+000 result=40 11:59:34 Config A/D Result=40 11:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:34 Get A/D filter: -9.255963e+061 result=40 11:59:34 Get A/D value=-858993460 result=40 11:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:34 Parameters OK 11:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:34 Set A/D data flow result=40 11:59:34 Set A/D channel type result=40 11:59:34 Set A/D encoding result=40 11:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:34 Set channel filter=0.000000e+000 result=40 11:59:34 Config A/D Result=40 11:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:34 Get A/D filter: -9.255963e+061 result=40 11:59:34 Get A/D value=-858993460 result=40 11:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:34 Aux= 11:59:34 Message to Camera, serial 276222 queued 11:59:42 Received message from Master: op=Shutter serial=276232 11:59:42 Shutter LASER close 11:59:43 Received message from Master: op=PointingHead serial=276236 11:59:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 11:59:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 11:59:43 Point started: ret=0 11:59:43 point_skyscan result=0 11:59:44 Check angles 11:59:44 SkyScan query 11:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 11:59:44 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 11:59:45 Check angles 11:59:45 SkyScan query 11:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 11:59:45 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 11:59:45 Check angles 11:59:45 SkyScan query 11:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 11:59:46 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 11:59:46 Check angles 11:59:46 SkyScan query 11:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 11:59:47 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 11:59:47 Check angles 11:59:47 SkyScan query 11:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.965<-15931 Statuses=0008 0009 11:59:47 Msec=3000 True Az=112.995 Ze=-58.965 Az status=0008 Ze status=0009 11:59:48 Check angles 11:59:48 SkyScan query 11:59:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.965<-14531 Statuses=0008 0009 11:59:48 Msec=3750 True Az=112.995 Ze=-37.965 Az status=0008 Ze status=0009 11:59:48 Check angles 11:59:48 SkyScan query 11:59:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 11:59:49 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 11:59:49 Check angles 11:59:49 SkyScan query 11:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.29<-11714 Statuses=0008 0009 11:59:50 Msec=5250 True Az=112.995 Ze=4.29 Az status=0008 Ze status=0009 11:59:50 Check angles 11:59:50 SkyScan query 11:59:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 11:59:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 11:59:50 Message to Master queued w/err=0: serial=276236 error=0 11:59:55 Received message from Master: op=Filter serial=276237 11:59:55 Color wheel filter change from 0 to 0 11:59:55 FLIGetFilterPos err=0 currentPosition=0 11:59:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:55 Filter is already there-color wheel unchanged 11:59:56 Received message from Master: op=Shutter serial=276238 11:59:56 Shutter LASER close 11:59:56 Received message from Camera: op=State serial=276240 11:59:56 GetSingleValue result=40 Value=cccccccc 11:59:56 SkyScan query 11:59:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 11:59:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:56 Parameters OK 11:59:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:56 Set A/D data flow result=40 11:59:56 Set A/D channel type result=40 11:59:56 Set A/D encoding result=40 11:59:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:56 Set channel filter=0.000000e+000 result=40 11:59:56 Config A/D Result=40 11:59:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:56 Get A/D filter: -9.255963e+061 result=40 11:59:56 Get A/D value=-858993460 result=40 11:59:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:56 Parameters OK 11:59:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:56 Set A/D data flow result=40 11:59:56 Set A/D channel type result=40 11:59:56 Set A/D encoding result=40 11:59:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:56 Set channel filter=0.000000e+000 result=40 11:59:56 Config A/D Result=40 11:59:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:56 Get A/D filter: -9.255963e+061 result=40 11:59:56 Get A/D value=-858993460 result=40 11:59:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:56 Aux= 11:59:56 Message to Camera, serial 276240 queued 12:00:33 Received message from Master: op=PointingHead serial=276253 12:00:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:00:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:00:34 Point started: ret=0 12:00:34 point_skyscan result=0 12:00:34 Check angles 12:00:34 SkyScan query 12:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:00:35 Message to Master queued w/err=0: serial=276253 error=0 12:00:40 Received message from Master: op=Filter serial=276254 12:00:40 Color wheel filter change from 0 to 0 12:00:40 FLIGetFilterPos err=0 currentPosition=0 12:00:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:40 Filter is already there-color wheel unchanged 12:00:40 Received message from Master: op=Shutter serial=276255 12:00:40 Shutter LASER close 12:00:40 Received message from Camera: op=State serial=276257 12:00:40 GetSingleValue result=40 Value=cccccccc 12:00:40 SkyScan query 12:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:00:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:41 Parameters OK 12:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:41 Set A/D data flow result=40 12:00:41 Set A/D channel type result=40 12:00:41 Set A/D encoding result=40 12:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:41 Set channel filter=0.000000e+000 result=40 12:00:41 Config A/D Result=40 12:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:41 Get A/D filter: -9.255963e+061 result=40 12:00:41 Get A/D value=-858993460 result=40 12:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:41 Parameters OK 12:00:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:41 Set A/D data flow result=40 12:00:41 Set A/D channel type result=40 12:00:41 Set A/D encoding result=40 12:00:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:41 Set channel filter=0.000000e+000 result=40 12:00:41 Config A/D Result=40 12:00:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:41 Get A/D filter: -9.255963e+061 result=40 12:00:41 Get A/D value=-858993460 result=40 12:00:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:41 Aux= 12:00:41 Message to Camera, serial 276257 queued 12:01:17 Received message from Master: op=PointingHead serial=276269 12:01:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:01:17 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:01:17 Point started: ret=0 12:01:17 point_skyscan result=0 12:01:18 Check angles 12:01:18 SkyScan query 12:01:18 SkyScan query done: ret=0 az=135.765<-9051 ze=-6.51<-12434 Statuses=0009 0008 12:01:18 Msec=0 True Az=135.765 Ze=-6.51 Az status=0009 Ze status=0008 12:01:18 Check angles 12:01:18 SkyScan query 12:01:19 SkyScan query done: ret=0 az=153.255<-10217 ze=-6.495<-12433 Statuses=0009 0008 12:01:19 Msec=750 True Az=153.255 Ze=-6.495 Az status=0009 Ze status=0008 12:01:19 Check angles 12:01:19 SkyScan query 12:01:20 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 12:01:20 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 12:01:20 Check angles 12:01:20 SkyScan query 12:01:20 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:01:20 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:01:20 Message to Master queued w/err=0: serial=276269 error=0 12:01:25 Received message from Master: op=Filter serial=276270 12:01:25 Color wheel filter change from 0 to 0 12:01:25 FLIGetFilterPos err=0 currentPosition=0 12:01:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:25 Filter is already there-color wheel unchanged 12:01:26 Received message from Master: op=Shutter serial=276271 12:01:26 Shutter LASER close 12:01:26 Received message from Camera: op=State serial=276273 12:01:26 GetSingleValue result=40 Value=cccccccc 12:01:26 SkyScan query 12:01:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:01:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:26 Parameters OK 12:01:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:26 Set A/D data flow result=40 12:01:26 Set A/D channel type result=40 12:01:26 Set A/D encoding result=40 12:01:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:26 Set channel filter=0.000000e+000 result=40 12:01:26 Config A/D Result=40 12:01:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:26 Get A/D filter: -9.255963e+061 result=40 12:01:26 Get A/D value=-858993460 result=40 12:01:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:26 Parameters OK 12:01:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:26 Set A/D data flow result=40 12:01:26 Set A/D channel type result=40 12:01:26 Set A/D encoding result=40 12:01:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:26 Set channel filter=0.000000e+000 result=40 12:01:26 Config A/D Result=40 12:01:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:26 Get A/D filter: -9.255963e+061 result=40 12:01:26 Get A/D value=-858993460 result=40 12:01:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:26 Aux= 12:01:26 Message to Camera, serial 276273 queued 12:02:03 Received message from Master: op=PointingHead serial=276286 12:02:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:02:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:02:03 Point started: ret=0 12:02:03 point_skyscan result=0 12:02:04 Check angles 12:02:04 SkyScan query 12:02:05 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 12:02:05 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 12:02:05 Check angles 12:02:05 SkyScan query 12:02:06 SkyScan query done: ret=0 az=134.805<-8987 ze=6.495<-11567 Statuses=0009 0008 12:02:06 Msec=750 True Az=134.805 Ze=6.495 Az status=0009 Ze status=0008 12:02:06 Check angles 12:02:06 SkyScan query 12:02:06 SkyScan query done: ret=0 az=117.465<-7831 ze=6.495<-11567 Statuses=0009 0008 12:02:06 Msec=1500 True Az=117.465 Ze=6.495 Az status=0009 Ze status=0008 12:02:06 Check angles 12:02:06 SkyScan query 12:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:07 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:02:07 Message to Master queued w/err=0: serial=276286 error=0 12:02:12 Received message from Master: op=Filter serial=276287 12:02:12 Color wheel filter change from 0 to 0 12:02:12 FLIGetFilterPos err=0 currentPosition=0 12:02:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:12 Filter is already there-color wheel unchanged 12:02:12 Received message from Master: op=Shutter serial=276288 12:02:12 Shutter LASER close 12:02:12 Received message from Camera: op=State serial=276290 12:02:12 GetSingleValue result=40 Value=cccccccc 12:02:12 SkyScan query 12:02:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:02:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:13 Parameters OK 12:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:13 Set A/D data flow result=40 12:02:13 Set A/D channel type result=40 12:02:13 Set A/D encoding result=40 12:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:13 Set channel filter=0.000000e+000 result=40 12:02:13 Config A/D Result=40 12:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:13 Get A/D filter: -9.255963e+061 result=40 12:02:13 Get A/D value=-858993460 result=40 12:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:13 Parameters OK 12:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:13 Set A/D data flow result=40 12:02:13 Set A/D channel type result=40 12:02:13 Set A/D encoding result=40 12:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:13 Set channel filter=0.000000e+000 result=40 12:02:13 Config A/D Result=40 12:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:13 Get A/D filter: -9.255963e+061 result=40 12:02:13 Get A/D value=-858993460 result=40 12:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:13 Aux= 12:02:13 Message to Camera, serial 276290 queued 12:02:50 Received message from Master: op=PointingHead serial=276303 12:02:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:02:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:02:50 Point started: ret=0 12:02:50 point_skyscan result=0 12:02:51 Check angles 12:02:51 SkyScan query 12:02:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.19<-13546 Statuses=0008 0009 12:02:51 Msec=0 True Az=112.995 Ze=-23.19 Az status=0008 Ze status=0009 12:02:52 Check angles 12:02:52 SkyScan query 12:02:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 12:02:52 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 12:02:52 Check angles 12:02:52 SkyScan query 12:02:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.94<-16396 Statuses=0008 0009 12:02:53 Msec=1500 True Az=112.995 Ze=-65.94 Az status=0008 Ze status=0009 12:02:53 Check angles 12:02:53 SkyScan query 12:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.925<-17795 Statuses=0008 0009 12:02:54 Msec=2250 True Az=112.995 Ze=-86.925 Az status=0008 Ze status=0009 12:02:54 Check angles 12:02:54 SkyScan query 12:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 12:02:54 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 12:02:55 Check angles 12:02:55 SkyScan query 12:02:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 12:02:55 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 12:02:55 Check angles 12:02:55 SkyScan query 12:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.805<-21987 Statuses=0008 0009 12:02:56 Msec=4500 True Az=112.995 Ze=-149.805 Az status=0008 Ze status=0009 12:02:56 Check angles 12:02:56 SkyScan query 12:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 12:02:57 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 12:02:57 Check angles 12:02:57 SkyScan query 12:02:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:02:57 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:02:57 Message to Master queued w/err=0: serial=276303 error=0 12:03:02 Received message from Master: op=Filter serial=276304 12:03:02 Color wheel filter change from 0 to 0 12:03:02 FLIGetFilterPos err=0 currentPosition=0 12:03:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:02 Filter is already there-color wheel unchanged 12:03:03 Received message from Master: op=Shutter serial=276305 12:03:03 Shutter LASER open 12:03:03 Received message from Camera: op=State serial=276307 12:03:03 GetSingleValue result=40 Value=cccccccc 12:03:03 SkyScan query 12:03:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:03:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:03 Parameters OK 12:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:03 Set A/D data flow result=40 12:03:03 Set A/D channel type result=40 12:03:03 Set A/D encoding result=40 12:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:03 Set channel filter=0.000000e+000 result=40 12:03:03 Config A/D Result=40 12:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:03 Get A/D filter: -9.255963e+061 result=40 12:03:03 Get A/D value=-858993460 result=40 12:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:03 Parameters OK 12:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:03 Set A/D data flow result=40 12:03:03 Set A/D channel type result=40 12:03:03 Set A/D encoding result=40 12:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:03 Set channel filter=0.000000e+000 result=40 12:03:03 Config A/D Result=40 12:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:03 Get A/D filter: -9.255963e+061 result=40 12:03:03 Get A/D value=-858993460 result=40 12:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:03 Aux= 12:03:03 Message to Camera, serial 276307 queued 12:03:12 Received message from Master: op=Shutter serial=276317 12:03:12 Shutter LASER close 12:03:12 Received message from Master: op=PointingHead serial=276321 12:03:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:03:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:03:13 Point started: ret=0 12:03:13 point_skyscan result=0 12:03:13 Check angles 12:03:13 SkyScan query 12:03:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 12:03:14 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 12:03:14 Check angles 12:03:14 SkyScan query 12:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 12:03:15 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 12:03:15 Check angles 12:03:15 SkyScan query 12:03:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 12:03:15 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 12:03:16 Check angles 12:03:16 SkyScan query 12:03:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 12:03:16 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 12:03:16 Check angles 12:03:16 SkyScan query 12:03:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.59<-15906 Statuses=0008 0009 12:03:17 Msec=3000 True Az=112.995 Ze=-58.59 Az status=0008 Ze status=0009 12:03:17 Check angles 12:03:17 SkyScan query 12:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 12:03:18 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 12:03:18 Check angles 12:03:18 SkyScan query 12:03:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 12:03:18 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 12:03:19 Check angles 12:03:19 SkyScan query 12:03:19 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 12:03:19 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 12:03:19 Check angles 12:03:19 SkyScan query 12:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:03:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:03:20 Message to Master queued w/err=0: serial=276321 error=0 12:03:25 Received message from Master: op=Filter serial=276322 12:03:25 Color wheel filter change from 0 to 0 12:03:25 FLIGetFilterPos err=0 currentPosition=0 12:03:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:25 Filter is already there-color wheel unchanged 12:03:25 Received message from Master: op=Shutter serial=276323 12:03:25 Shutter LASER close 12:03:25 Received message from Camera: op=State serial=276325 12:03:25 GetSingleValue result=40 Value=cccccccc 12:03:25 SkyScan query 12:03:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:03:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:26 Parameters OK 12:03:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:26 Set A/D data flow result=40 12:03:26 Set A/D channel type result=40 12:03:26 Set A/D encoding result=40 12:03:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:26 Set channel filter=0.000000e+000 result=40 12:03:26 Config A/D Result=40 12:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:26 Get A/D filter: -9.255963e+061 result=40 12:03:26 Get A/D value=-858993460 result=40 12:03:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:26 Parameters OK 12:03:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:26 Set A/D data flow result=40 12:03:26 Set A/D channel type result=40 12:03:26 Set A/D encoding result=40 12:03:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:26 Set channel filter=0.000000e+000 result=40 12:03:26 Config A/D Result=40 12:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:26 Get A/D filter: -9.255963e+061 result=40 12:03:26 Get A/D value=-858993460 result=40 12:03:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:26 Aux= 12:03:26 Message to Camera, serial 276325 queued 12:03:35 Received message from Master: op=Identify serial=276326 [UTC 2019-3-14 12:03:48] 12:04:03 Received message from Master: op=PointingHead serial=276341 12:04:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:03 Point started: ret=0 12:04:03 point_skyscan result=0 12:04:04 Check angles 12:04:04 SkyScan query 12:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:04 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:04:04 Message to Master queued w/err=0: serial=276341 error=0 12:04:09 Received message from Master: op=Filter serial=276342 12:04:09 Color wheel filter change from 0 to 0 12:04:09 FLIGetFilterPos err=0 currentPosition=0 12:04:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:09 Filter is already there-color wheel unchanged 12:04:10 Received message from Master: op=Shutter serial=276343 12:04:10 Shutter LASER close 12:04:10 Received message from Camera: op=State serial=276345 12:04:10 GetSingleValue result=40 Value=cccccccc 12:04:10 SkyScan query 12:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:10 Parameters OK 12:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:10 Set A/D data flow result=40 12:04:10 Set A/D channel type result=40 12:04:10 Set A/D encoding result=40 12:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:10 Set channel filter=0.000000e+000 result=40 12:04:10 Config A/D Result=40 12:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:10 Get A/D filter: -9.255963e+061 result=40 12:04:10 Get A/D value=-858993460 result=40 12:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:10 Parameters OK 12:04:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:10 Set A/D data flow result=40 12:04:10 Set A/D channel type result=40 12:04:10 Set A/D encoding result=40 12:04:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:10 Set channel filter=0.000000e+000 result=40 12:04:10 Config A/D Result=40 12:04:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:10 Get A/D filter: -9.255963e+061 result=40 12:04:10 Get A/D value=-858993460 result=40 12:04:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:10 Aux= 12:04:10 Message to Camera, serial 276345 queued 12:04:47 Received message from Master: op=PointingHead serial=276358 12:04:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:04:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:04:47 Point started: ret=0 12:04:47 point_skyscan result=0 12:04:48 Check angles 12:04:48 SkyScan query 12:04:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:04:49 Message to Master queued w/err=0: serial=276358 error=0 12:04:54 Received message from Master: op=Filter serial=276359 12:04:54 Color wheel filter change from 0 to 0 12:04:54 FLIGetFilterPos err=0 currentPosition=0 12:04:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:54 Filter is already there-color wheel unchanged 12:04:54 Received message from Master: op=Shutter serial=276360 12:04:54 Shutter LASER close 12:04:54 Received message from Camera: op=State serial=276362 12:04:54 GetSingleValue result=40 Value=cccccccc 12:04:54 SkyScan query 12:04:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:04:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:54 Parameters OK 12:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:54 Set A/D data flow result=40 12:04:54 Set A/D channel type result=40 12:04:54 Set A/D encoding result=40 12:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:54 Set channel filter=0.000000e+000 result=40 12:04:54 Config A/D Result=40 12:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:54 Get A/D filter: -9.255963e+061 result=40 12:04:54 Get A/D value=-858993460 result=40 12:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:54 Parameters OK 12:04:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:54 Set A/D data flow result=40 12:04:54 Set A/D channel type result=40 12:04:54 Set A/D encoding result=40 12:04:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:54 Set channel filter=0.000000e+000 result=40 12:04:54 Config A/D Result=40 12:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:54 Get A/D filter: -9.255963e+061 result=40 12:04:54 Get A/D value=-858993460 result=40 12:04:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:54 Aux= 12:04:54 Message to Camera, serial 276362 queued 12:05:31 Received message from Master: op=PointingHead serial=276375 12:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:05:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:05:32 Point started: ret=0 12:05:32 point_skyscan result=0 12:05:32 Check angles 12:05:32 SkyScan query 12:05:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:33 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:05:33 Message to Master queued w/err=0: serial=276375 error=0 12:05:38 Received message from Master: op=Filter serial=276376 12:05:38 Color wheel filter change from 0 to 0 12:05:38 FLIGetFilterPos err=0 currentPosition=0 12:05:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:38 Filter is already there-color wheel unchanged 12:05:38 Received message from Master: op=Shutter serial=276377 12:05:38 Shutter LASER close 12:05:38 Received message from Camera: op=State serial=276379 12:05:38 GetSingleValue result=40 Value=cccccccc 12:05:38 SkyScan query 12:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:05:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:39 Parameters OK 12:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:39 Set A/D data flow result=40 12:05:39 Set A/D channel type result=40 12:05:39 Set A/D encoding result=40 12:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:39 Set channel filter=0.000000e+000 result=40 12:05:39 Config A/D Result=40 12:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:39 Get A/D filter: -9.255963e+061 result=40 12:05:39 Get A/D value=-858993460 result=40 12:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:39 Parameters OK 12:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:39 Set A/D data flow result=40 12:05:39 Set A/D channel type result=40 12:05:39 Set A/D encoding result=40 12:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:39 Set channel filter=0.000000e+000 result=40 12:05:39 Config A/D Result=40 12:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:39 Get A/D filter: -9.255963e+061 result=40 12:05:39 Get A/D value=-858993460 result=40 12:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:39 Aux= 12:05:39 Message to Camera, serial 276379 queued 12:06:16 Received message from Master: op=PointingHead serial=276392 12:06:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:06:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:06:16 Point started: ret=0 12:06:16 point_skyscan result=0 12:06:17 Check angles 12:06:17 SkyScan query 12:06:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.7<-13580 Statuses=0008 0009 12:06:17 Msec=0 True Az=112.995 Ze=-23.7 Az status=0008 Ze status=0009 12:06:17 Check angles 12:06:17 SkyScan query 12:06:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.06<-15004 Statuses=0008 0009 12:06:18 Msec=750 True Az=112.995 Ze=-45.06 Az status=0008 Ze status=0009 12:06:18 Check angles 12:06:18 SkyScan query 12:06:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.015<-16401 Statuses=0008 0009 12:06:19 Msec=1500 True Az=112.995 Ze=-66.015 Az status=0008 Ze status=0009 12:06:19 Check angles 12:06:19 SkyScan query 12:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.985<-17799 Statuses=0008 0009 12:06:20 Msec=2250 True Az=112.995 Ze=-86.985 Az status=0008 Ze status=0009 12:06:20 Check angles 12:06:20 SkyScan query 12:06:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 12:06:20 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 12:06:20 Check angles 12:06:20 SkyScan query 12:06:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.88<-20592 Statuses=0008 0009 12:06:21 Msec=3750 True Az=112.995 Ze=-128.88 Az status=0008 Ze status=0009 12:06:21 Check angles 12:06:21 SkyScan query 12:06:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.285<-22019 Statuses=0008 0009 12:06:22 Msec=4500 True Az=112.995 Ze=-150.285 Az status=0008 Ze status=0009 12:06:22 Check angles 12:06:22 SkyScan query 12:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 12:06:23 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 12:06:23 Check angles 12:06:23 SkyScan query 12:06:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:06:23 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:06:23 Message to Master queued w/err=0: serial=276392 error=0 12:06:28 Received message from Master: op=Filter serial=276393 12:06:28 Color wheel filter change from 0 to 0 12:06:28 FLIGetFilterPos err=0 currentPosition=0 12:06:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:28 Filter is already there-color wheel unchanged 12:06:28 Received message from Master: op=Shutter serial=276394 12:06:28 Shutter LASER open 12:06:29 Received message from Camera: op=State serial=276396 12:06:29 GetSingleValue result=40 Value=cccccccc 12:06:29 SkyScan query 12:06:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:06:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:29 Parameters OK 12:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:29 Set A/D data flow result=40 12:06:29 Set A/D channel type result=40 12:06:29 Set A/D encoding result=40 12:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:29 Set channel filter=0.000000e+000 result=40 12:06:29 Config A/D Result=40 12:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:29 Get A/D filter: -9.255963e+061 result=40 12:06:29 Get A/D value=-858993460 result=40 12:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:29 Parameters OK 12:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:29 Set A/D data flow result=40 12:06:29 Set A/D channel type result=40 12:06:29 Set A/D encoding result=40 12:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:29 Set channel filter=0.000000e+000 result=40 12:06:29 Config A/D Result=40 12:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:29 Get A/D filter: -9.255963e+061 result=40 12:06:29 Get A/D value=-858993460 result=40 12:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:29 Aux= 12:06:29 Message to Camera, serial 276396 queued 12:06:38 Received message from Master: op=Shutter serial=276406 12:06:38 Shutter LASER close 12:06:38 Received message from Master: op=PointingHead serial=276410 12:06:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:06:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:06:39 Point started: ret=0 12:06:39 point_skyscan result=0 12:06:39 Check angles 12:06:39 SkyScan query 12:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.13<-21542 Statuses=0008 0009 12:06:40 Msec=0 True Az=112.995 Ze=-143.13 Az status=0008 Ze status=0009 12:06:40 Check angles 12:06:40 SkyScan query 12:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 12:06:41 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 12:06:41 Check angles 12:06:41 SkyScan query 12:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.25<-18750 Statuses=0008 0009 12:06:41 Msec=1500 True Az=112.995 Ze=-101.25 Az status=0008 Ze status=0009 12:06:42 Check angles 12:06:42 SkyScan query 12:06:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 12:06:42 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 12:06:42 Check angles 12:06:42 SkyScan query 12:06:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 12:06:43 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 12:06:43 Check angles 12:06:43 SkyScan query 12:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.875<-14525 Statuses=0008 0009 12:06:44 Msec=3750 True Az=112.995 Ze=-37.875 Az status=0008 Ze status=0009 12:06:44 Check angles 12:06:44 SkyScan query 12:06:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.92<-13128 Statuses=0008 0009 12:06:44 Msec=4500 True Az=112.995 Ze=-16.92 Az status=0008 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 12:06:45 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 12:06:45 Check angles 12:06:45 SkyScan query 12:06:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:06:46 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:06:46 Message to Master queued w/err=0: serial=276410 error=0 12:06:51 Received message from Master: op=Filter serial=276411 12:06:51 Color wheel filter change from 0 to 0 12:06:51 FLIGetFilterPos err=0 currentPosition=0 12:06:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:51 Filter is already there-color wheel unchanged 12:06:51 Received message from Master: op=Shutter serial=276412 12:06:51 Shutter LASER close 12:06:51 Received message from Camera: op=State serial=276414 12:06:51 GetSingleValue result=40 Value=cccccccc 12:06:51 SkyScan query 12:06:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:06:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:52 Parameters OK 12:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:52 Set A/D data flow result=40 12:06:52 Set A/D channel type result=40 12:06:52 Set A/D encoding result=40 12:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:52 Set channel filter=0.000000e+000 result=40 12:06:52 Config A/D Result=40 12:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:52 Get A/D filter: -9.255963e+061 result=40 12:06:52 Get A/D value=-858993460 result=40 12:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:52 Parameters OK 12:06:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:52 Set A/D data flow result=40 12:06:52 Set A/D channel type result=40 12:06:52 Set A/D encoding result=40 12:06:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:52 Set channel filter=0.000000e+000 result=40 12:06:52 Config A/D Result=40 12:06:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:52 Get A/D filter: -9.255963e+061 result=40 12:06:52 Get A/D value=-858993460 result=40 12:06:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:52 Aux= 12:06:52 Message to Camera, serial 276414 queued 12:07:28 Received message from Master: op=PointingHead serial=276426 12:07:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:07:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:07:28 Point started: ret=0 12:07:28 point_skyscan result=0 12:07:29 Check angles 12:07:29 SkyScan query 12:07:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:07:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:07:29 Message to Master queued w/err=0: serial=276426 error=0 12:07:34 Received message from Master: op=Filter serial=276427 12:07:34 Color wheel filter change from 0 to 0 12:07:34 FLIGetFilterPos err=0 currentPosition=0 12:07:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:34 Filter is already there-color wheel unchanged 12:07:35 Received message from Master: op=Shutter serial=276428 12:07:35 Shutter LASER close 12:07:35 Received message from Camera: op=State serial=276430 12:07:35 GetSingleValue result=40 Value=cccccccc 12:07:35 SkyScan query 12:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:07:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:35 Parameters OK 12:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:35 Set A/D data flow result=40 12:07:35 Set A/D channel type result=40 12:07:35 Set A/D encoding result=40 12:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:35 Set channel filter=0.000000e+000 result=40 12:07:35 Config A/D Result=40 12:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:35 Get A/D filter: -9.255963e+061 result=40 12:07:35 Get A/D value=-858993460 result=40 12:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:35 Parameters OK 12:07:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:35 Set A/D data flow result=40 12:07:35 Set A/D channel type result=40 12:07:35 Set A/D encoding result=40 12:07:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:35 Set channel filter=0.000000e+000 result=40 12:07:35 Config A/D Result=40 12:07:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:35 Get A/D filter: -9.255963e+061 result=40 12:07:35 Get A/D value=-858993460 result=40 12:07:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:35 Aux= 12:07:35 Message to Camera, serial 276430 queued 12:08:12 Received message from Master: op=PointingHead serial=276443 12:08:12 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:08:12 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:08:12 Point started: ret=0 12:08:12 point_skyscan result=0 12:08:13 Check angles 12:08:13 SkyScan query 12:08:14 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 12:08:14 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 12:08:14 Check angles 12:08:14 SkyScan query 12:08:14 SkyScan query done: ret=0 az=153.54<-10236 ze=-6.495<-12433 Statuses=0009 0008 12:08:14 Msec=750 True Az=153.54 Ze=-6.495 Az status=0009 Ze status=0008 12:08:15 Check angles 12:08:15 SkyScan query 12:08:15 SkyScan query done: ret=0 az=171.075<-11405 ze=-6.495<-12433 Statuses=0009 0008 12:08:15 Msec=1500 True Az=171.075 Ze=-6.495 Az status=0009 Ze status=0008 12:08:15 Check angles 12:08:15 SkyScan query 12:08:16 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:08:16 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:08:16 Message to Master queued w/err=0: serial=276443 error=0 12:08:21 Received message from Master: op=Filter serial=276444 12:08:21 Color wheel filter change from 0 to 0 12:08:21 FLIGetFilterPos err=0 currentPosition=0 12:08:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:21 Filter is already there-color wheel unchanged 12:08:21 Received message from Master: op=Shutter serial=276445 12:08:21 Shutter LASER close 12:08:21 Received message from Camera: op=State serial=276447 12:08:21 GetSingleValue result=40 Value=cccccccc 12:08:21 SkyScan query 12:08:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:08:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:22 Parameters OK 12:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:22 Set A/D data flow result=40 12:08:22 Set A/D channel type result=40 12:08:22 Set A/D encoding result=40 12:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:22 Set channel filter=0.000000e+000 result=40 12:08:22 Config A/D Result=40 12:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:22 Get A/D filter: -9.255963e+061 result=40 12:08:22 Get A/D value=-858993460 result=40 12:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:22 Parameters OK 12:08:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:22 Set A/D data flow result=40 12:08:22 Set A/D channel type result=40 12:08:22 Set A/D encoding result=40 12:08:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:22 Set channel filter=0.000000e+000 result=40 12:08:22 Config A/D Result=40 12:08:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:22 Get A/D filter: -9.255963e+061 result=40 12:08:22 Get A/D value=-858993460 result=40 12:08:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:22 Aux= 12:08:22 Message to Camera, serial 276447 queued 12:08:59 Received message from Master: op=PointingHead serial=276460 12:08:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:08:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:08:59 Point started: ret=0 12:08:59 point_skyscan result=0 12:09:00 Check angles 12:09:00 SkyScan query 12:09:00 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 12:09:00 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 12:09:00 Check angles 12:09:00 SkyScan query 12:09:01 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 12:09:01 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 12:09:01 Check angles 12:09:01 SkyScan query 12:09:02 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 12:09:02 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 12:09:02 Check angles 12:09:02 SkyScan query 12:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:09:03 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:09:03 Message to Master queued w/err=0: serial=276460 error=0 12:09:08 Received message from Master: op=Filter serial=276461 12:09:08 Color wheel filter change from 0 to 0 12:09:08 FLIGetFilterPos err=0 currentPosition=0 12:09:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:08 Filter is already there-color wheel unchanged 12:09:08 Received message from Master: op=Shutter serial=276462 12:09:08 Shutter LASER close 12:09:08 Received message from Camera: op=State serial=276464 12:09:08 GetSingleValue result=40 Value=cccccccc 12:09:08 SkyScan query 12:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:09:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:08 Parameters OK 12:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:08 Set A/D data flow result=40 12:09:08 Set A/D channel type result=40 12:09:08 Set A/D encoding result=40 12:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:08 Set channel filter=0.000000e+000 result=40 12:09:08 Config A/D Result=40 12:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:08 Get A/D filter: -9.255963e+061 result=40 12:09:08 Get A/D value=-858993460 result=40 12:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:08 Parameters OK 12:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:08 Set A/D data flow result=40 12:09:08 Set A/D channel type result=40 12:09:08 Set A/D encoding result=40 12:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:08 Set channel filter=0.000000e+000 result=40 12:09:08 Config A/D Result=40 12:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:08 Get A/D filter: -9.255963e+061 result=40 12:09:08 Get A/D value=-858993460 result=40 12:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:08 Aux= 12:09:08 Message to Camera, serial 276464 queued 12:09:45 Received message from Master: op=PointingHead serial=276477 12:09:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:46 Point started: ret=0 12:09:46 point_skyscan result=0 12:09:46 Check angles 12:09:46 SkyScan query 12:09:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 12:09:47 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 12:09:47 Check angles 12:09:47 SkyScan query 12:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 12:09:48 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 12:09:48 Check angles 12:09:48 SkyScan query 12:09:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 12:09:48 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 12:09:49 Check angles 12:09:49 SkyScan query 12:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.01<-17734 Statuses=0008 0009 12:09:49 Msec=2250 True Az=112.995 Ze=-86.01 Az status=0008 Ze status=0009 12:09:49 Check angles 12:09:49 SkyScan query 12:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.415<-19161 Statuses=0008 0009 12:09:50 Msec=3000 True Az=112.995 Ze=-107.415 Az status=0008 Ze status=0009 12:09:50 Check angles 12:09:50 SkyScan query 12:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.355<-20557 Statuses=0008 0009 12:09:51 Msec=3750 True Az=112.995 Ze=-128.355 Az status=0008 Ze status=0009 12:09:51 Check angles 12:09:51 SkyScan query 12:09:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.355<-21957 Statuses=0008 0009 12:09:51 Msec=4500 True Az=112.995 Ze=-149.355 Az status=0008 Ze status=0009 12:09:52 Check angles 12:09:52 SkyScan query 12:09:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 12:09:52 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 12:09:52 Check angles 12:09:52 SkyScan query 12:09:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:09:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:09:53 Message to Master queued w/err=0: serial=276477 error=0 12:09:58 Received message from Master: op=Filter serial=276478 12:09:58 Color wheel filter change from 0 to 0 12:09:58 FLIGetFilterPos err=0 currentPosition=0 12:09:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:58 Filter is already there-color wheel unchanged 12:09:58 Received message from Master: op=Shutter serial=276479 12:09:58 Shutter LASER open 12:09:58 Received message from Camera: op=State serial=276481 12:09:58 GetSingleValue result=40 Value=cccccccc 12:09:58 SkyScan query 12:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:59 Parameters OK 12:09:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:59 Set A/D data flow result=40 12:09:59 Set A/D channel type result=40 12:09:59 Set A/D encoding result=40 12:09:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:59 Set channel filter=0.000000e+000 result=40 12:09:59 Config A/D Result=40 12:09:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:59 Get A/D filter: -9.255963e+061 result=40 12:09:59 Get A/D value=-858993460 result=40 12:09:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:59 Parameters OK 12:09:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:59 Set A/D data flow result=40 12:09:59 Set A/D channel type result=40 12:09:59 Set A/D encoding result=40 12:09:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:59 Set channel filter=0.000000e+000 result=40 12:09:59 Config A/D Result=40 12:09:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:59 Get A/D filter: -9.255963e+061 result=40 12:09:59 Get A/D value=-858993460 result=40 12:09:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:59 Aux= 12:09:59 Message to Camera, serial 276481 queued 12:10:07 Received message from Master: op=Shutter serial=276491 12:10:07 Shutter LASER close 12:10:08 Received message from Master: op=PointingHead serial=276495 12:10:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:08 Point started: ret=0 12:10:08 point_skyscan result=0 12:10:09 Check angles 12:10:09 SkyScan query 12:10:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.085<-21539 Statuses=0008 0009 12:10:09 Msec=0 True Az=112.995 Ze=-143.085 Az status=0008 Ze status=0009 12:10:10 Check angles 12:10:10 SkyScan query 12:10:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.665<-20111 Statuses=0008 0009 12:10:10 Msec=750 True Az=112.995 Ze=-121.665 Az status=0008 Ze status=0009 12:10:10 Check angles 12:10:10 SkyScan query 12:10:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.74<-18716 Statuses=0008 0009 12:10:11 Msec=1500 True Az=112.995 Ze=-100.74 Az status=0008 Ze status=0009 12:10:11 Check angles 12:10:11 SkyScan query 12:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 12:10:12 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 12:10:12 Check angles 12:10:12 SkyScan query 12:10:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.335<-15889 Statuses=0008 0009 12:10:12 Msec=3000 True Az=112.995 Ze=-58.335 Az status=0008 Ze status=0009 12:10:13 Check angles 12:10:13 SkyScan query 12:10:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.425<-14495 Statuses=0008 0009 12:10:13 Msec=3750 True Az=112.995 Ze=-37.425 Az status=0008 Ze status=0009 12:10:13 Check angles 12:10:13 SkyScan query 12:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.455<-13097 Statuses=0008 0009 12:10:14 Msec=4500 True Az=112.995 Ze=-16.455 Az status=0008 Ze status=0009 12:10:14 Check angles 12:10:14 SkyScan query 12:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.71<-11686 Statuses=0008 0009 12:10:15 Msec=5250 True Az=112.995 Ze=4.71 Az status=0008 Ze status=0009 12:10:15 Check angles 12:10:15 SkyScan query 12:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:10:15 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:10:15 Message to Master queued w/err=0: serial=276495 error=0 12:10:20 Received message from Master: op=Filter serial=276496 12:10:20 Color wheel filter change from 0 to 0 12:10:20 FLIGetFilterPos err=0 currentPosition=0 12:10:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:20 Filter is already there-color wheel unchanged 12:10:21 Received message from Master: op=Shutter serial=276497 12:10:21 Shutter LASER close 12:10:21 Received message from Camera: op=State serial=276499 12:10:21 GetSingleValue result=40 Value=cccccccc 12:10:21 SkyScan query 12:10:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:10:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:21 Parameters OK 12:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:21 Set A/D data flow result=40 12:10:21 Set A/D channel type result=40 12:10:21 Set A/D encoding result=40 12:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:21 Set channel filter=0.000000e+000 result=40 12:10:21 Config A/D Result=40 12:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:21 Get A/D filter: -9.255963e+061 result=40 12:10:21 Get A/D value=-858993460 result=40 12:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:21 Parameters OK 12:10:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:21 Set A/D data flow result=40 12:10:21 Set A/D channel type result=40 12:10:21 Set A/D encoding result=40 12:10:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:21 Set channel filter=0.000000e+000 result=40 12:10:21 Config A/D Result=40 12:10:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:21 Get A/D filter: -9.255963e+061 result=40 12:10:21 Get A/D value=-858993460 result=40 12:10:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:21 Aux= 12:10:21 Message to Camera, serial 276499 queued 12:10:58 Received message from Master: op=PointingHead serial=276512 12:10:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:10:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:10:58 Point started: ret=0 12:10:58 point_skyscan result=0 12:10:59 Check angles 12:10:59 SkyScan query 12:11:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:11:00 Message to Master queued w/err=0: serial=276512 error=0 12:11:05 Received message from Master: op=Filter serial=276513 12:11:05 Color wheel filter change from 0 to 0 12:11:05 FLIGetFilterPos err=0 currentPosition=0 12:11:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:05 Filter is already there-color wheel unchanged 12:11:05 Received message from Master: op=Shutter serial=276514 12:11:05 Shutter LASER close 12:11:05 Received message from Camera: op=State serial=276516 12:11:05 GetSingleValue result=40 Value=cccccccc 12:11:05 SkyScan query 12:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:06 Parameters OK 12:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:06 Set A/D data flow result=40 12:11:06 Set A/D channel type result=40 12:11:06 Set A/D encoding result=40 12:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:06 Set channel filter=0.000000e+000 result=40 12:11:06 Config A/D Result=40 12:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:06 Get A/D filter: -9.255963e+061 result=40 12:11:06 Get A/D value=-858993460 result=40 12:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:06 Parameters OK 12:11:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:06 Set A/D data flow result=40 12:11:06 Set A/D channel type result=40 12:11:06 Set A/D encoding result=40 12:11:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:06 Set channel filter=0.000000e+000 result=40 12:11:06 Config A/D Result=40 12:11:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:06 Get A/D filter: -9.255963e+061 result=40 12:11:06 Get A/D value=-858993460 result=40 12:11:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:06 Aux= 12:11:06 Message to Camera, serial 276516 queued 12:11:42 Received message from Master: op=PointingHead serial=276529 12:11:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:11:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:11:43 Point started: ret=0 12:11:43 point_skyscan result=0 12:11:44 Check angles 12:11:44 SkyScan query 12:11:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:11:44 Message to Master queued w/err=0: serial=276529 error=0 12:11:49 Received message from Master: op=Filter serial=276530 12:11:49 Color wheel filter change from 0 to 0 12:11:49 FLIGetFilterPos err=0 currentPosition=0 12:11:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:49 Filter is already there-color wheel unchanged 12:11:49 Received message from Master: op=Shutter serial=276531 12:11:49 Shutter LASER close 12:11:49 Received message from Camera: op=State serial=276533 12:11:49 GetSingleValue result=40 Value=cccccccc 12:11:49 SkyScan query 12:11:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:11:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:50 Parameters OK 12:11:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:50 Set A/D data flow result=40 12:11:50 Set A/D channel type result=40 12:11:50 Set A/D encoding result=40 12:11:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:50 Set channel filter=0.000000e+000 result=40 12:11:50 Config A/D Result=40 12:11:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:50 Get A/D filter: -9.255963e+061 result=40 12:11:50 Get A/D value=-858993460 result=40 12:11:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:50 Parameters OK 12:11:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:50 Set A/D data flow result=40 12:11:50 Set A/D channel type result=40 12:11:50 Set A/D encoding result=40 12:11:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:50 Set channel filter=0.000000e+000 result=40 12:11:50 Config A/D Result=40 12:11:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:50 Get A/D filter: -9.255963e+061 result=40 12:11:50 Get A/D value=-858993460 result=40 12:11:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:50 Aux= 12:11:50 Message to Camera, serial 276533 queued 12:12:26 Received message from Master: op=PointingHead serial=276545 12:12:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:12:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:12:26 Point started: ret=0 12:12:26 point_skyscan result=0 12:12:27 Check angles 12:12:27 SkyScan query 12:12:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:12:27 Message to Master queued w/err=0: serial=276545 error=0 12:12:32 Received message from Master: op=Filter serial=276546 12:12:32 Color wheel filter change from 0 to 0 12:12:32 FLIGetFilterPos err=0 currentPosition=0 12:12:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:32 Filter is already there-color wheel unchanged 12:12:33 Received message from Master: op=Shutter serial=276547 12:12:33 Shutter LASER close 12:12:33 Received message from Camera: op=State serial=276549 12:12:33 GetSingleValue result=40 Value=cccccccc 12:12:33 SkyScan query 12:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:12:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:33 Parameters OK 12:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:33 Set A/D data flow result=40 12:12:33 Set A/D channel type result=40 12:12:33 Set A/D encoding result=40 12:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:33 Set channel filter=0.000000e+000 result=40 12:12:33 Config A/D Result=40 12:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:33 Get A/D filter: -9.255963e+061 result=40 12:12:33 Get A/D value=-858993460 result=40 12:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:33 Parameters OK 12:12:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:33 Set A/D data flow result=40 12:12:33 Set A/D channel type result=40 12:12:33 Set A/D encoding result=40 12:12:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:33 Set channel filter=0.000000e+000 result=40 12:12:33 Config A/D Result=40 12:12:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:33 Get A/D filter: -9.255963e+061 result=40 12:12:33 Get A/D value=-858993460 result=40 12:12:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:33 Aux= 12:12:33 Message to Camera, serial 276549 queued 12:13:10 Received message from Master: op=PointingHead serial=276562 12:13:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:13:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:13:10 Point started: ret=0 12:13:10 point_skyscan result=0 12:13:11 Check angles 12:13:11 SkyScan query 12:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 12:13:12 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 12:13:12 Check angles 12:13:12 SkyScan query 12:13:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 12:13:13 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 12:13:13 Check angles 12:13:13 SkyScan query 12:13:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 12:13:13 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 12:13:13 Check angles 12:13:13 SkyScan query 12:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 12:13:14 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 12:13:14 Check angles 12:13:14 SkyScan query 12:13:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.325<-19155 Statuses=0008 0009 12:13:15 Msec=3000 True Az=112.995 Ze=-107.325 Az status=0008 Ze status=0009 12:13:15 Check angles 12:13:15 SkyScan query 12:13:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.73<-20582 Statuses=0008 0009 12:13:16 Msec=3750 True Az=112.995 Ze=-128.73 Az status=0008 Ze status=0009 12:13:16 Check angles 12:13:16 SkyScan query 12:13:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.715<-21981 Statuses=0008 0009 12:13:16 Msec=4500 True Az=112.995 Ze=-149.715 Az status=0008 Ze status=0009 12:13:16 Check angles 12:13:16 SkyScan query 12:13:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.625<-23375 Statuses=0008 0009 12:13:17 Msec=5250 True Az=112.995 Ze=-170.625 Az status=0008 Ze status=0009 12:13:17 Check angles 12:13:17 SkyScan query 12:13:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:13:18 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:13:18 Message to Master queued w/err=0: serial=276562 error=0 12:13:23 Received message from Master: op=Filter serial=276563 12:13:23 Color wheel filter change from 0 to 0 12:13:23 FLIGetFilterPos err=0 currentPosition=0 12:13:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:23 Filter is already there-color wheel unchanged 12:13:23 Received message from Master: op=Shutter serial=276564 12:13:23 Shutter LASER open 12:13:23 Received message from Camera: op=State serial=276566 12:13:23 GetSingleValue result=40 Value=cccccccc 12:13:23 SkyScan query 12:13:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:13:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:24 Parameters OK 12:13:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:24 Set A/D data flow result=40 12:13:24 Set A/D channel type result=40 12:13:24 Set A/D encoding result=40 12:13:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:24 Set channel filter=0.000000e+000 result=40 12:13:24 Config A/D Result=40 12:13:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:24 Get A/D filter: -9.255963e+061 result=40 12:13:24 Get A/D value=-858993460 result=40 12:13:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:24 Parameters OK 12:13:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:24 Set A/D data flow result=40 12:13:24 Set A/D channel type result=40 12:13:24 Set A/D encoding result=40 12:13:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:24 Set channel filter=0.000000e+000 result=40 12:13:24 Config A/D Result=40 12:13:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:24 Get A/D filter: -9.255963e+061 result=40 12:13:24 Get A/D value=-858993460 result=40 12:13:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:24 Aux= 12:13:24 Message to Camera, serial 276566 queued 12:13:32 Received message from Master: op=Shutter serial=276576 12:13:32 Shutter LASER close 12:13:33 Received message from Master: op=PointingHead serial=276580 12:13:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:13:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:13:33 Point started: ret=0 12:13:33 point_skyscan result=0 12:13:34 Check angles 12:13:34 SkyScan query 12:13:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.31<-21554 Statuses=0008 0009 12:13:34 Msec=0 True Az=112.995 Ze=-143.31 Az status=0008 Ze status=0009 12:13:35 Check angles 12:13:35 SkyScan query 12:13:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.89<-20126 Statuses=0008 0009 12:13:35 Msec=750 True Az=112.995 Ze=-121.89 Az status=0008 Ze status=0009 12:13:35 Check angles 12:13:35 SkyScan query 12:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.98<-18732 Statuses=0008 0009 12:13:36 Msec=1500 True Az=112.995 Ze=-100.98 Az status=0008 Ze status=0009 12:13:36 Check angles 12:13:36 SkyScan query 12:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.01<-17334 Statuses=0008 0009 12:13:37 Msec=2250 True Az=112.995 Ze=-80.01 Az status=0008 Ze status=0009 12:13:37 Check angles 12:13:37 SkyScan query 12:13:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 12:13:37 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 12:13:38 Check angles 12:13:38 SkyScan query 12:13:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 12:13:38 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 12:13:38 Check angles 12:13:38 SkyScan query 12:13:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.665<-13111 Statuses=0008 0009 12:13:39 Msec=4500 True Az=112.995 Ze=-16.665 Az status=0008 Ze status=0009 12:13:39 Check angles 12:13:39 SkyScan query 12:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=4.53<-11698 Statuses=0008 0009 12:13:40 Msec=5250 True Az=112.995 Ze=4.53 Az status=0008 Ze status=0009 12:13:40 Check angles 12:13:40 SkyScan query 12:13:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:13:40 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:13:40 Message to Master queued w/err=0: serial=276580 error=0 12:13:45 Received message from Master: op=Filter serial=276581 12:13:45 Color wheel filter change from 0 to 0 12:13:45 FLIGetFilterPos err=0 currentPosition=0 12:13:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:45 Filter is already there-color wheel unchanged 12:13:46 Received message from Master: op=Shutter serial=276582 12:13:46 Shutter LASER close 12:13:46 Received message from Camera: op=State serial=276584 12:13:46 GetSingleValue result=40 Value=cccccccc 12:13:46 SkyScan query 12:13:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:13:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:46 Parameters OK 12:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:46 Set A/D data flow result=40 12:13:46 Set A/D channel type result=40 12:13:46 Set A/D encoding result=40 12:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:46 Set channel filter=0.000000e+000 result=40 12:13:46 Config A/D Result=40 12:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:46 Get A/D filter: -9.255963e+061 result=40 12:13:46 Get A/D value=-858993460 result=40 12:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:46 Parameters OK 12:13:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:46 Set A/D data flow result=40 12:13:46 Set A/D channel type result=40 12:13:46 Set A/D encoding result=40 12:13:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:46 Set channel filter=0.000000e+000 result=40 12:13:46 Config A/D Result=40 12:13:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:46 Get A/D filter: -9.255963e+061 result=40 12:13:46 Get A/D value=-858993460 result=40 12:13:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:46 Aux= 12:13:46 Message to Camera, serial 276584 queued 12:14:23 Received message from Master: op=PointingHead serial=276597 12:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:14:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:14:24 Point started: ret=0 12:14:24 point_skyscan result=0 12:14:24 Check angles 12:14:24 SkyScan query 12:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:14:25 Message to Master queued w/err=0: serial=276597 error=0 12:14:30 Received message from Master: op=Filter serial=276598 12:14:30 Color wheel filter change from 0 to 0 [UTC 2019-3-14 12:14:30] 12:14:30 FLIGetFilterPos err=0 currentPosition=0 12:14:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:30 Filter is already there-color wheel unchanged 12:14:30 Received message from Master: op=Shutter serial=276599 12:14:30 Shutter LASER close 12:14:30 Received message from Camera: op=State serial=276601 12:14:30 GetSingleValue result=40 Value=cccccccc 12:14:30 SkyScan query 12:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:31 Parameters OK 12:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:31 Set A/D data flow result=40 12:14:31 Set A/D channel type result=40 12:14:31 Set A/D encoding result=40 12:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:31 Set channel filter=0.000000e+000 result=40 12:14:31 Config A/D Result=40 12:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:31 Get A/D filter: -9.255963e+061 result=40 12:14:31 Get A/D value=-858993460 result=40 12:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:31 Parameters OK 12:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:31 Set A/D data flow result=40 12:14:31 Set A/D channel type result=40 12:14:31 Set A/D encoding result=40 12:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:31 Set channel filter=0.000000e+000 result=40 12:14:31 Config A/D Result=40 12:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:31 Get A/D filter: -9.255963e+061 result=40 12:14:31 Get A/D value=-858993460 result=40 12:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:31 Aux= 12:14:31 Message to Camera, serial 276601 queued 12:15:08 Received message from Master: op=PointingHead serial=276614 12:15:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:15:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:15:08 Point started: ret=0 12:15:08 point_skyscan result=0 12:15:09 Check angles 12:15:09 SkyScan query 12:15:09 SkyScan query done: ret=0 az=136.38<-9092 ze=-6.51<-12434 Statuses=0009 0008 12:15:09 Msec=0 True Az=136.38 Ze=-6.51 Az status=0009 Ze status=0008 12:15:09 Check angles 12:15:09 SkyScan query 12:15:10 SkyScan query done: ret=0 az=153.795<-10253 ze=-6.495<-12433 Statuses=0009 0008 12:15:10 Msec=750 True Az=153.795 Ze=-6.495 Az status=0009 Ze status=0008 12:15:10 Check angles 12:15:10 SkyScan query 12:15:11 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 12:15:11 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 12:15:11 Check angles 12:15:11 SkyScan query 12:15:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:15:12 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:15:12 Message to Master queued w/err=0: serial=276614 error=0 12:15:17 Received message from Master: op=Filter serial=276615 12:15:17 Color wheel filter change from 0 to 0 12:15:17 FLIGetFilterPos err=0 currentPosition=0 12:15:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:17 Filter is already there-color wheel unchanged 12:15:17 Received message from Master: op=Shutter serial=276616 12:15:17 Shutter LASER close 12:15:17 Received message from Camera: op=State serial=276618 12:15:17 GetSingleValue result=40 Value=cccccccc 12:15:17 SkyScan query 12:15:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:15:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:17 Parameters OK 12:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:17 Set A/D data flow result=40 12:15:17 Set A/D channel type result=40 12:15:17 Set A/D encoding result=40 12:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:17 Set channel filter=0.000000e+000 result=40 12:15:17 Config A/D Result=40 12:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:17 Get A/D filter: -9.255963e+061 result=40 12:15:17 Get A/D value=-858993460 result=40 12:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:17 Parameters OK 12:15:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:17 Set A/D data flow result=40 12:15:17 Set A/D channel type result=40 12:15:17 Set A/D encoding result=40 12:15:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:17 Set channel filter=0.000000e+000 result=40 12:15:17 Config A/D Result=40 12:15:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:17 Get A/D filter: -9.255963e+061 result=40 12:15:17 Get A/D value=-858993460 result=40 12:15:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:17 Aux= 12:15:17 Message to Camera, serial 276618 queued 12:15:54 Received message from Master: op=PointingHead serial=276631 12:15:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:15:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:15:55 Point started: ret=0 12:15:55 point_skyscan result=0 12:15:55 Check angles 12:15:55 SkyScan query 12:15:56 SkyScan query done: ret=0 az=152.7<-10180 ze=6.51<-11566 Statuses=0009 0008 12:15:56 Msec=0 True Az=152.7 Ze=6.51 Az status=0009 Ze status=0008 12:15:56 Check angles 12:15:56 SkyScan query 12:15:57 SkyScan query done: ret=0 az=135.285<-9019 ze=6.495<-11567 Statuses=0009 0008 12:15:57 Msec=750 True Az=135.285 Ze=6.495 Az status=0009 Ze status=0008 12:15:57 Check angles 12:15:57 SkyScan query 12:15:57 SkyScan query done: ret=0 az=117.345<-7823 ze=6.495<-11567 Statuses=0009 0008 12:15:57 Msec=1500 True Az=117.345 Ze=6.495 Az status=0009 Ze status=0008 12:15:58 Check angles 12:15:58 SkyScan query 12:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:15:58 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:15:58 Message to Master queued w/err=0: serial=276631 error=0 12:16:03 Received message from Master: op=Filter serial=276632 12:16:03 Color wheel filter change from 0 to 0 12:16:03 FLIGetFilterPos err=0 currentPosition=0 12:16:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:03 Filter is already there-color wheel unchanged 12:16:03 Received message from Master: op=Shutter serial=276633 12:16:03 Shutter LASER close 12:16:03 Received message from Camera: op=State serial=276635 12:16:03 GetSingleValue result=40 Value=cccccccc 12:16:03 SkyScan query 12:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:16:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:04 Parameters OK 12:16:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:04 Set A/D data flow result=40 12:16:04 Set A/D channel type result=40 12:16:04 Set A/D encoding result=40 12:16:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:04 Set channel filter=0.000000e+000 result=40 12:16:04 Config A/D Result=40 12:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:04 Get A/D filter: -9.255963e+061 result=40 12:16:04 Get A/D value=-858993460 result=40 12:16:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:04 Parameters OK 12:16:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:04 Set A/D data flow result=40 12:16:04 Set A/D channel type result=40 12:16:04 Set A/D encoding result=40 12:16:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:04 Set channel filter=0.000000e+000 result=40 12:16:04 Config A/D Result=40 12:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:04 Get A/D filter: -9.255963e+061 result=40 12:16:04 Get A/D value=-858993460 result=40 12:16:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:04 Aux= 12:16:04 Message to Camera, serial 276635 queued 12:16:41 Received message from Master: op=PointingHead serial=276648 12:16:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:16:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:16:41 Point started: ret=0 12:16:41 point_skyscan result=0 12:16:42 Check angles 12:16:42 SkyScan query 12:16:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.565<-13571 Statuses=0008 0009 12:16:42 Msec=0 True Az=112.995 Ze=-23.565 Az status=0008 Ze status=0009 12:16:43 Check angles 12:16:43 SkyScan query 12:16:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 12:16:43 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 12:16:43 Check angles 12:16:43 SkyScan query 12:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 12:16:44 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 12:16:44 Check angles 12:16:44 SkyScan query 12:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.4<-17760 Statuses=0008 0009 12:16:45 Msec=2250 True Az=112.995 Ze=-86.4 Az status=0008 Ze status=0009 12:16:45 Check angles 12:16:45 SkyScan query 12:16:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.4<-19160 Statuses=0008 0009 12:16:45 Msec=3000 True Az=112.995 Ze=-107.4 Az status=0008 Ze status=0009 12:16:46 Check angles 12:16:46 SkyScan query 12:16:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 12:16:46 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 12:16:46 Check angles 12:16:46 SkyScan query 12:16:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.325<-21955 Statuses=0008 0009 12:16:47 Msec=4500 True Az=112.995 Ze=-149.325 Az status=0008 Ze status=0009 12:16:47 Check angles 12:16:47 SkyScan query 12:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 12:16:48 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 12:16:48 Check angles 12:16:48 SkyScan query 12:16:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:16:48 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:16:48 Message to Master queued w/err=0: serial=276648 error=0 12:16:54 Received message from Master: op=Filter serial=276649 12:16:54 Color wheel filter change from 0 to 0 12:16:54 FLIGetFilterPos err=0 currentPosition=0 12:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:54 Filter is already there-color wheel unchanged 12:16:54 Received message from Master: op=Shutter serial=276650 12:16:54 Shutter LASER open 12:16:54 Received message from Camera: op=State serial=276652 12:16:54 GetSingleValue result=40 Value=cccccccc 12:16:54 SkyScan query 12:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:16:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:54 Parameters OK 12:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:54 Set A/D data flow result=40 12:16:54 Set A/D channel type result=40 12:16:54 Set A/D encoding result=40 12:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:54 Set channel filter=0.000000e+000 result=40 12:16:54 Config A/D Result=40 12:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:54 Get A/D filter: -9.255963e+061 result=40 12:16:54 Get A/D value=-858993460 result=40 12:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:54 Parameters OK 12:16:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:54 Set A/D data flow result=40 12:16:54 Set A/D channel type result=40 12:16:54 Set A/D encoding result=40 12:16:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:54 Set channel filter=0.000000e+000 result=40 12:16:54 Config A/D Result=40 12:16:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:54 Get A/D filter: -9.255963e+061 result=40 12:16:54 Get A/D value=-858993460 result=40 12:16:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:54 Aux= 12:16:54 Message to Camera, serial 276652 queued 12:17:02 Received message from Master: op=Shutter serial=276661 12:17:02 Shutter LASER close 12:17:02 Received message from Master: op=PointingHead serial=276665 12:17:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:02 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:03 Point started: ret=0 12:17:03 point_skyscan result=0 12:17:04 Check angles 12:17:04 SkyScan query 12:17:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 12:17:04 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 12:17:04 Check angles 12:17:04 SkyScan query 12:17:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 12:17:05 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 12:17:05 Check angles 12:17:05 SkyScan query 12:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 12:17:06 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 12:17:06 Check angles 12:17:06 SkyScan query 12:17:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 12:17:06 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 12:17:07 Check angles 12:17:07 SkyScan query 12:17:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 12:17:07 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 12:17:07 Check angles 12:17:07 SkyScan query 12:17:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.62<-14508 Statuses=0008 0009 12:17:08 Msec=3750 True Az=112.995 Ze=-37.62 Az status=0008 Ze status=0009 12:17:08 Check angles 12:17:08 SkyScan query 12:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 12:17:09 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 12:17:09 Check angles 12:17:09 SkyScan query 12:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 12:17:09 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 12:17:10 Check angles 12:17:10 SkyScan query 12:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:17:10 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:17:10 Message to Master queued w/err=0: serial=276665 error=0 12:17:15 Received message from Master: op=Filter serial=276666 12:17:15 Color wheel filter change from 0 to 0 12:17:15 FLIGetFilterPos err=0 currentPosition=0 12:17:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:15 Filter is already there-color wheel unchanged 12:17:15 Received message from Master: op=Shutter serial=276667 12:17:15 Shutter LASER close 12:17:15 Received message from Camera: op=State serial=276669 12:17:15 GetSingleValue result=40 Value=cccccccc 12:17:15 SkyScan query 12:17:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:16 Parameters OK 12:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:16 Set A/D data flow result=40 12:17:16 Set A/D channel type result=40 12:17:16 Set A/D encoding result=40 12:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:16 Set channel filter=0.000000e+000 result=40 12:17:16 Config A/D Result=40 12:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:16 Get A/D filter: -9.255963e+061 result=40 12:17:16 Get A/D value=-858993460 result=40 12:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:16 Parameters OK 12:17:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:16 Set A/D data flow result=40 12:17:16 Set A/D channel type result=40 12:17:16 Set A/D encoding result=40 12:17:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:16 Set channel filter=0.000000e+000 result=40 12:17:16 Config A/D Result=40 12:17:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:16 Get A/D filter: -9.255963e+061 result=40 12:17:16 Get A/D value=-858993460 result=40 12:17:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:16 Aux= 12:17:16 Message to Camera, serial 276669 queued 12:17:53 Received message from Master: op=PointingHead serial=276682 12:17:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:17:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:17:53 Point started: ret=0 12:17:53 point_skyscan result=0 12:17:54 Check angles 12:17:54 SkyScan query 12:17:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:17:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:17:55 Message to Master queued w/err=0: serial=276682 error=0 12:18:00 Received message from Master: op=Filter serial=276683 12:18:00 Color wheel filter change from 0 to 0 12:18:00 FLIGetFilterPos err=0 currentPosition=0 12:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:00 Filter is already there-color wheel unchanged 12:18:00 Received message from Master: op=Shutter serial=276684 12:18:00 Shutter LASER close 12:18:00 Received message from Camera: op=State serial=276686 12:18:00 GetSingleValue result=40 Value=cccccccc 12:18:00 SkyScan query 12:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:00 Parameters OK 12:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:00 Set A/D data flow result=40 12:18:00 Set A/D channel type result=40 12:18:00 Set A/D encoding result=40 12:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:00 Set channel filter=0.000000e+000 result=40 12:18:00 Config A/D Result=40 12:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:00 Get A/D filter: -9.255963e+061 result=40 12:18:00 Get A/D value=-858993460 result=40 12:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:00 Parameters OK 12:18:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:00 Set A/D data flow result=40 12:18:00 Set A/D channel type result=40 12:18:00 Set A/D encoding result=40 12:18:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:00 Set channel filter=0.000000e+000 result=40 12:18:00 Config A/D Result=40 12:18:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:00 Get A/D filter: -9.255963e+061 result=40 12:18:00 Get A/D value=-858993460 result=40 12:18:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:00 Aux= 12:18:00 Message to Camera, serial 276686 queued 12:18:37 Received message from Master: op=PointingHead serial=276699 12:18:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:18:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:18:37 Point started: ret=0 12:18:37 point_skyscan result=0 12:18:38 Check angles 12:18:38 SkyScan query 12:18:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:18:39 Message to Master queued w/err=0: serial=276699 error=0 12:18:44 Received message from Master: op=Filter serial=276700 12:18:44 Color wheel filter change from 0 to 0 12:18:44 FLIGetFilterPos err=0 currentPosition=0 12:18:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:44 Filter is already there-color wheel unchanged 12:18:44 Received message from Master: op=Shutter serial=276701 12:18:44 Shutter LASER close 12:18:44 Received message from Camera: op=State serial=276703 12:18:44 GetSingleValue result=40 Value=cccccccc 12:18:44 SkyScan query 12:18:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:18:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:45 Parameters OK 12:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:45 Set A/D data flow result=40 12:18:45 Set A/D channel type result=40 12:18:45 Set A/D encoding result=40 12:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:45 Set channel filter=0.000000e+000 result=40 12:18:45 Config A/D Result=40 12:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:45 Get A/D filter: -9.255963e+061 result=40 12:18:45 Get A/D value=-858993460 result=40 12:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:45 Parameters OK 12:18:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:45 Set A/D data flow result=40 12:18:45 Set A/D channel type result=40 12:18:45 Set A/D encoding result=40 12:18:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:45 Set channel filter=0.000000e+000 result=40 12:18:45 Config A/D Result=40 12:18:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:45 Get A/D filter: -9.255963e+061 result=40 12:18:45 Get A/D value=-858993460 result=40 12:18:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:45 Aux= 12:18:45 Message to Camera, serial 276703 queued 12:19:21 Received message from Master: op=PointingHead serial=276716 12:19:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:19:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:19:22 Point started: ret=0 12:19:22 point_skyscan result=0 12:19:23 Check angles 12:19:23 SkyScan query 12:19:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:19:23 Message to Master queued w/err=0: serial=276716 error=0 12:19:28 Received message from Master: op=Filter serial=276717 12:19:28 Color wheel filter change from 0 to 0 12:19:28 FLIGetFilterPos err=0 currentPosition=0 12:19:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:28 Filter is already there-color wheel unchanged 12:19:28 Received message from Master: op=Shutter serial=276718 12:19:28 Shutter LASER close 12:19:28 Received message from Camera: op=State serial=276720 12:19:28 GetSingleValue result=40 Value=cccccccc 12:19:28 SkyScan query 12:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:19:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:29 Parameters OK 12:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:29 Set A/D data flow result=40 12:19:29 Set A/D channel type result=40 12:19:29 Set A/D encoding result=40 12:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:29 Set channel filter=0.000000e+000 result=40 12:19:29 Config A/D Result=40 12:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:29 Get A/D filter: -9.255963e+061 result=40 12:19:29 Get A/D value=-858993460 result=40 12:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:29 Parameters OK 12:19:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:29 Set A/D data flow result=40 12:19:29 Set A/D channel type result=40 12:19:29 Set A/D encoding result=40 12:19:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:29 Set channel filter=0.000000e+000 result=40 12:19:29 Config A/D Result=40 12:19:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:29 Get A/D filter: -9.255963e+061 result=40 12:19:29 Get A/D value=-858993460 result=40 12:19:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:29 Aux= 12:19:29 Message to Camera, serial 276720 queued 12:20:06 Received message from Master: op=PointingHead serial=276733 12:20:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:20:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:20:06 Point started: ret=0 12:20:06 point_skyscan result=0 12:20:07 Check angles 12:20:07 SkyScan query 12:20:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.535<-13569 Statuses=0008 0009 12:20:07 Msec=0 True Az=112.995 Ze=-23.535 Az status=0008 Ze status=0009 12:20:08 Check angles 12:20:08 SkyScan query 12:20:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 12:20:08 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 12:20:08 Check angles 12:20:08 SkyScan query 12:20:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 12:20:09 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 12:20:09 Check angles 12:20:09 SkyScan query 12:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.67<-17778 Statuses=0008 0009 12:20:10 Msec=2250 True Az=112.995 Ze=-86.67 Az status=0008 Ze status=0009 12:20:10 Check angles 12:20:10 SkyScan query 12:20:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 12:20:10 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 12:20:11 Check angles 12:20:11 SkyScan query 12:20:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 12:20:11 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 12:20:11 Check angles 12:20:11 SkyScan query 12:20:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.985<-21999 Statuses=0008 0009 12:20:12 Msec=4500 True Az=112.995 Ze=-149.985 Az status=0008 Ze status=0009 12:20:12 Check angles 12:20:12 SkyScan query 12:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 12:20:13 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 12:20:13 Check angles 12:20:13 SkyScan query 12:20:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:20:13 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:20:13 Message to Master queued w/err=0: serial=276733 error=0 12:20:18 Received message from Master: op=Filter serial=276734 12:20:18 Color wheel filter change from 0 to 0 12:20:18 FLIGetFilterPos err=0 currentPosition=0 12:20:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:18 Filter is already there-color wheel unchanged 12:20:19 Received message from Master: op=Shutter serial=276735 12:20:19 Shutter LASER open 12:20:19 Received message from Camera: op=State serial=276737 12:20:19 GetSingleValue result=40 Value=cccccccc 12:20:19 SkyScan query 12:20:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:20:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:19 Parameters OK 12:20:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:19 Set A/D data flow result=40 12:20:19 Set A/D channel type result=40 12:20:19 Set A/D encoding result=40 12:20:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:19 Set channel filter=0.000000e+000 result=40 12:20:19 Config A/D Result=40 12:20:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:19 Get A/D filter: -9.255963e+061 result=40 12:20:19 Get A/D value=-858993460 result=40 12:20:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:19 Parameters OK 12:20:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:19 Set A/D data flow result=40 12:20:19 Set A/D channel type result=40 12:20:19 Set A/D encoding result=40 12:20:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:19 Set channel filter=0.000000e+000 result=40 12:20:19 Config A/D Result=40 12:20:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:19 Get A/D filter: -9.255963e+061 result=40 12:20:19 Get A/D value=-858993460 result=40 12:20:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:19 Aux= 12:20:19 Message to Camera, serial 276737 queued 12:20:28 Received message from Master: op=Shutter serial=276747 12:20:28 Shutter LASER close 12:20:28 Received message from Master: op=PointingHead serial=276751 12:20:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:20:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:20:29 Point started: ret=0 12:20:29 point_skyscan result=0 12:20:30 Check angles 12:20:30 SkyScan query 12:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.89<-21526 Statuses=0008 0009 12:20:30 Msec=0 True Az=112.995 Ze=-142.89 Az status=0008 Ze status=0009 12:20:30 Check angles 12:20:30 SkyScan query 12:20:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.455<-20097 Statuses=0008 0009 12:20:31 Msec=750 True Az=112.995 Ze=-121.455 Az status=0008 Ze status=0009 12:20:31 Check angles 12:20:31 SkyScan query 12:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.5<-18700 Statuses=0008 0009 12:20:32 Msec=1500 True Az=112.995 Ze=-100.5 Az status=0008 Ze status=0009 12:20:32 Check angles 12:20:32 SkyScan query 12:20:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.53<-17302 Statuses=0008 0009 12:20:32 Msec=2250 True Az=112.995 Ze=-79.53 Az status=0008 Ze status=0009 12:20:33 Check angles 12:20:33 SkyScan query 12:20:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.575<-15905 Statuses=0008 0009 12:20:33 Msec=3000 True Az=112.995 Ze=-58.575 Az status=0008 Ze status=0009 12:20:33 Check angles 12:20:33 SkyScan query 12:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.635<-14509 Statuses=0008 0009 12:20:34 Msec=3750 True Az=112.995 Ze=-37.635 Az status=0008 Ze status=0009 12:20:34 Check angles 12:20:34 SkyScan query 12:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.68<-13112 Statuses=0008 0009 12:20:35 Msec=4500 True Az=112.995 Ze=-16.68 Az status=0008 Ze status=0009 12:20:35 Check angles 12:20:35 SkyScan query 12:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=4.23<-11718 Statuses=0008 0009 12:20:35 Msec=5250 True Az=112.995 Ze=4.23 Az status=0008 Ze status=0009 12:20:36 Check angles 12:20:36 SkyScan query 12:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:20:36 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:20:36 Message to Master queued w/err=0: serial=276751 error=0 12:20:41 Received message from Master: op=Filter serial=276752 12:20:41 Color wheel filter change from 0 to 0 12:20:41 FLIGetFilterPos err=0 currentPosition=0 12:20:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:41 Filter is already there-color wheel unchanged 12:20:41 Received message from Master: op=Shutter serial=276753 12:20:41 Shutter LASER close 12:20:41 Received message from Camera: op=State serial=276755 12:20:41 GetSingleValue result=40 Value=cccccccc 12:20:41 SkyScan query 12:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:20:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:42 Parameters OK 12:20:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:42 Set A/D data flow result=40 12:20:42 Set A/D channel type result=40 12:20:42 Set A/D encoding result=40 12:20:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:42 Set channel filter=0.000000e+000 result=40 12:20:42 Config A/D Result=40 12:20:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:42 Get A/D filter: -9.255963e+061 result=40 12:20:42 Get A/D value=-858993460 result=40 12:20:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:42 Parameters OK 12:20:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:42 Set A/D data flow result=40 12:20:42 Set A/D channel type result=40 12:20:42 Set A/D encoding result=40 12:20:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:42 Set channel filter=0.000000e+000 result=40 12:20:42 Config A/D Result=40 12:20:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:42 Get A/D filter: -9.255963e+061 result=40 12:20:42 Get A/D value=-858993460 result=40 12:20:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:42 Aux= 12:20:42 Message to Camera, serial 276755 queued 12:21:19 Received message from Master: op=PointingHead serial=276768 12:21:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:21:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:21:19 Point started: ret=0 12:21:19 point_skyscan result=0 12:21:20 Check angles 12:21:20 SkyScan query 12:21:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:21:21 Message to Master queued w/err=0: serial=276768 error=0 12:21:26 Received message from Master: op=Filter serial=276769 12:21:26 Color wheel filter change from 0 to 0 12:21:26 FLIGetFilterPos err=0 currentPosition=0 12:21:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:26 Filter is already there-color wheel unchanged 12:21:26 Received message from Master: op=Shutter serial=276770 12:21:26 Shutter LASER close 12:21:26 Received message from Camera: op=State serial=276772 12:21:26 GetSingleValue result=40 Value=cccccccc 12:21:26 SkyScan query 12:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:21:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:26 Parameters OK 12:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:26 Set A/D data flow result=40 12:21:26 Set A/D channel type result=40 12:21:26 Set A/D encoding result=40 12:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:26 Set channel filter=0.000000e+000 result=40 12:21:26 Config A/D Result=40 12:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:26 Get A/D filter: -9.255963e+061 result=40 12:21:26 Get A/D value=-858993460 result=40 12:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:26 Parameters OK 12:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:26 Set A/D data flow result=40 12:21:26 Set A/D channel type result=40 12:21:26 Set A/D encoding result=40 12:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:26 Set channel filter=0.000000e+000 result=40 12:21:26 Config A/D Result=40 12:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:26 Get A/D filter: -9.255963e+061 result=40 12:21:26 Get A/D value=-858993460 result=40 12:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:26 Aux= 12:21:26 Message to Camera, serial 276772 queued 12:22:03 Received message from Master: op=PointingHead serial=276785 12:22:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:22:03 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:22:04 Point started: ret=0 12:22:04 point_skyscan result=0 12:22:04 Check angles 12:22:04 SkyScan query 12:22:05 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 12:22:05 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 12:22:05 Check angles 12:22:05 SkyScan query 12:22:06 SkyScan query done: ret=0 az=153.87<-10258 ze=-6.495<-12433 Statuses=0009 0008 12:22:06 Msec=750 True Az=153.87 Ze=-6.495 Az status=0009 Ze status=0008 12:22:06 Check angles 12:22:06 SkyScan query 12:22:06 SkyScan query done: ret=0 az=171.255<-11417 ze=-6.495<-12433 Statuses=0009 0008 12:22:06 Msec=1500 True Az=171.255 Ze=-6.495 Az status=0009 Ze status=0008 12:22:07 Check angles 12:22:07 SkyScan query 12:22:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:22:07 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:22:07 Message to Master queued w/err=0: serial=276785 error=0 12:22:12 Received message from Master: op=Filter serial=276786 12:22:12 Color wheel filter change from 0 to 0 12:22:12 FLIGetFilterPos err=0 currentPosition=0 12:22:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:12 Filter is already there-color wheel unchanged 12:22:12 Received message from Master: op=Shutter serial=276787 12:22:12 Shutter LASER close 12:22:12 Received message from Camera: op=State serial=276789 12:22:12 GetSingleValue result=40 Value=cccccccc 12:22:12 SkyScan query 12:22:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:22:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:13 Parameters OK 12:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:13 Set A/D data flow result=40 12:22:13 Set A/D channel type result=40 12:22:13 Set A/D encoding result=40 12:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:13 Set channel filter=0.000000e+000 result=40 12:22:13 Config A/D Result=40 12:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:13 Get A/D filter: -9.255963e+061 result=40 12:22:13 Get A/D value=-858993460 result=40 12:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:13 Parameters OK 12:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:13 Set A/D data flow result=40 12:22:13 Set A/D channel type result=40 12:22:13 Set A/D encoding result=40 12:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:13 Set channel filter=0.000000e+000 result=40 12:22:13 Config A/D Result=40 12:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:13 Get A/D filter: -9.255963e+061 result=40 12:22:13 Get A/D value=-858993460 result=40 12:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:13 Aux= 12:22:13 Message to Camera, serial 276789 queued 12:22:50 Received message from Master: op=PointingHead serial=276802 12:22:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:22:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:22:50 Point started: ret=0 12:22:50 point_skyscan result=0 12:22:51 Check angles 12:22:51 SkyScan query 12:22:51 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 12:22:51 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 12:22:52 Check angles 12:22:52 SkyScan query 12:22:52 SkyScan query done: ret=0 az=135.435<-9029 ze=6.495<-11567 Statuses=0009 0008 12:22:52 Msec=750 True Az=135.435 Ze=6.495 Az status=0009 Ze status=0008 12:22:52 Check angles 12:22:52 SkyScan query 12:22:53 SkyScan query done: ret=0 az=117.9<-7860 ze=6.495<-11567 Statuses=0009 0008 12:22:53 Msec=1500 True Az=117.9 Ze=6.495 Az status=0009 Ze status=0008 12:22:53 Check angles 12:22:53 SkyScan query 12:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:22:54 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:22:54 Message to Master queued w/err=0: serial=276802 error=0 12:22:59 Received message from Master: op=Filter serial=276803 12:22:59 Color wheel filter change from 0 to 0 12:22:59 FLIGetFilterPos err=0 currentPosition=0 12:22:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:59 Filter is already there-color wheel unchanged 12:22:59 Received message from Master: op=Shutter serial=276804 12:22:59 Shutter LASER close 12:22:59 Received message from Camera: op=State serial=276806 12:22:59 GetSingleValue result=40 Value=cccccccc 12:22:59 SkyScan query 12:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:00 Parameters OK 12:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:00 Set A/D data flow result=40 12:23:00 Set A/D channel type result=40 12:23:00 Set A/D encoding result=40 12:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:00 Set channel filter=0.000000e+000 result=40 12:23:00 Config A/D Result=40 12:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:00 Get A/D filter: -9.255963e+061 result=40 12:23:00 Get A/D value=-858993460 result=40 12:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:00 Parameters OK 12:23:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:00 Set A/D data flow result=40 12:23:00 Set A/D channel type result=40 12:23:00 Set A/D encoding result=40 12:23:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:00 Set channel filter=0.000000e+000 result=40 12:23:00 Config A/D Result=40 12:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:00 Get A/D filter: -9.255963e+061 result=40 12:23:00 Get A/D value=-858993460 result=40 12:23:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:00 Aux= 12:23:00 Message to Camera, serial 276806 queued 12:23:36 Received message from Master: op=PointingHead serial=276819 12:23:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:23:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:23:37 Point started: ret=0 12:23:37 point_skyscan result=0 12:23:37 Check angles 12:23:37 SkyScan query 12:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 12:23:38 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 12:23:38 Check angles 12:23:38 SkyScan query 12:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.13<-14942 Statuses=0008 0009 12:23:39 Msec=750 True Az=112.995 Ze=-44.13 Az status=0008 Ze status=0009 12:23:39 Check angles 12:23:39 SkyScan query 12:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 12:23:40 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 12:23:40 Check angles 12:23:40 SkyScan query 12:23:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.415<-17761 Statuses=0008 0009 12:23:40 Msec=2250 True Az=112.995 Ze=-86.415 Az status=0008 Ze status=0009 12:23:41 Check angles 12:23:41 SkyScan query 12:23:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.865<-19191 Statuses=0008 0009 12:23:41 Msec=3000 True Az=112.995 Ze=-107.865 Az status=0008 Ze status=0009 12:23:41 Check angles 12:23:41 SkyScan query 12:23:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.775<-20585 Statuses=0008 0009 12:23:42 Msec=3750 True Az=112.995 Ze=-128.775 Az status=0008 Ze status=0009 12:23:42 Check angles 12:23:42 SkyScan query 12:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.165<-22011 Statuses=0008 0009 12:23:43 Msec=4500 True Az=112.995 Ze=-150.165 Az status=0008 Ze status=0009 12:23:43 Check angles 12:23:43 SkyScan query 12:23:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0008 0009 12:23:43 Msec=5250 True Az=112.995 Ze=-171.3 Az status=0008 Ze status=0009 12:23:44 Check angles 12:23:44 SkyScan query 12:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:23:44 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:23:44 Message to Master queued w/err=0: serial=276819 error=0 [UTC 2019-3-14 12:23:48] 12:23:49 Received message from Master: op=Filter serial=276820 12:23:49 Color wheel filter change from 0 to 0 12:23:49 FLIGetFilterPos err=0 currentPosition=0 12:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:49 Filter is already there-color wheel unchanged 12:23:49 Received message from Master: op=Shutter serial=276821 12:23:49 Shutter LASER open 12:23:49 Received message from Camera: op=State serial=276823 12:23:49 GetSingleValue result=40 Value=cccccccc 12:23:49 SkyScan query 12:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:50 Parameters OK 12:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:50 Set A/D data flow result=40 12:23:50 Set A/D channel type result=40 12:23:50 Set A/D encoding result=40 12:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:50 Set channel filter=0.000000e+000 result=40 12:23:50 Config A/D Result=40 12:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:50 Get A/D filter: -9.255963e+061 result=40 12:23:50 Get A/D value=-858993460 result=40 12:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:50 Parameters OK 12:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:50 Set A/D data flow result=40 12:23:50 Set A/D channel type result=40 12:23:50 Set A/D encoding result=40 12:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:50 Set channel filter=0.000000e+000 result=40 12:23:50 Config A/D Result=40 12:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:50 Get A/D filter: -9.255963e+061 result=40 12:23:50 Get A/D value=-858993460 result=40 12:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:50 Aux= 12:23:50 Message to Camera, serial 276823 queued 12:23:58 Received message from Master: op=Shutter serial=276833 12:23:58 Shutter LASER close 12:23:59 Received message from Master: op=PointingHead serial=276837 12:23:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:23:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:23:59 Point started: ret=0 12:23:59 point_skyscan result=0 12:24:00 Check angles 12:24:00 SkyScan query 12:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.34<-21556 Statuses=0008 0009 12:24:01 Msec=0 True Az=112.995 Ze=-143.34 Az status=0008 Ze status=0009 12:24:01 Check angles 12:24:01 SkyScan query 12:24:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 12:24:01 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 12:24:02 Check angles 12:24:02 SkyScan query 12:24:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 12:24:02 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 12:24:02 Check angles 12:24:02 SkyScan query 12:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.055<-17337 Statuses=0008 0009 12:24:03 Msec=2250 True Az=112.995 Ze=-80.055 Az status=0008 Ze status=0009 12:24:03 Check angles 12:24:03 SkyScan query 12:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.62<-15908 Statuses=0008 0009 12:24:04 Msec=3000 True Az=112.995 Ze=-58.62 Az status=0008 Ze status=0009 12:24:04 Check angles 12:24:04 SkyScan query 12:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.65<-14510 Statuses=0008 0009 12:24:04 Msec=3750 True Az=112.995 Ze=-37.65 Az status=0008 Ze status=0009 12:24:05 Check angles 12:24:05 SkyScan query 12:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.695<-13113 Statuses=0008 0009 12:24:05 Msec=4500 True Az=112.995 Ze=-16.695 Az status=0008 Ze status=0009 12:24:05 Check angles 12:24:05 SkyScan query 12:24:06 SkyScan query done: ret=0 az=113.01<-7534 ze=4.515<-11699 Statuses=0008 0009 12:24:06 Msec=5250 True Az=113.01 Ze=4.515 Az status=0008 Ze status=0009 12:24:06 Check angles 12:24:06 SkyScan query 12:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:24:07 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:24:07 Message to Master queued w/err=0: serial=276837 error=0 12:24:12 Received message from Master: op=Filter serial=276838 12:24:12 Color wheel filter change from 0 to 0 12:24:12 FLIGetFilterPos err=0 currentPosition=0 12:24:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:12 Filter is already there-color wheel unchanged 12:24:12 Received message from Master: op=Shutter serial=276839 12:24:12 Shutter LASER close 12:24:12 Received message from Camera: op=State serial=276841 12:24:12 GetSingleValue result=40 Value=cccccccc 12:24:12 SkyScan query 12:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:13 Parameters OK 12:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:13 Set A/D data flow result=40 12:24:13 Set A/D channel type result=40 12:24:13 Set A/D encoding result=40 12:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:13 Set channel filter=0.000000e+000 result=40 12:24:13 Config A/D Result=40 12:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:13 Get A/D filter: -9.255963e+061 result=40 12:24:13 Get A/D value=-858993460 result=40 12:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:13 Parameters OK 12:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:13 Set A/D data flow result=40 12:24:13 Set A/D channel type result=40 12:24:13 Set A/D encoding result=40 12:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:13 Set channel filter=0.000000e+000 result=40 12:24:13 Config A/D Result=40 12:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:13 Get A/D filter: -9.255963e+061 result=40 12:24:13 Get A/D value=-858993460 result=40 12:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:13 Aux= 12:24:13 Message to Camera, serial 276841 queued 12:24:49 Received message from Master: op=PointingHead serial=276854 12:24:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:24:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:24:50 Point started: ret=0 12:24:50 point_skyscan result=0 12:24:50 Check angles 12:24:50 SkyScan query 12:24:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:24:51 Message to Master queued w/err=0: serial=276854 error=0 12:24:56 Received message from Master: op=Filter serial=276855 12:24:56 Color wheel filter change from 0 to 0 12:24:56 FLIGetFilterPos err=0 currentPosition=0 12:24:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:56 Filter is already there-color wheel unchanged 12:24:56 Received message from Master: op=Shutter serial=276856 12:24:56 Shutter LASER close 12:24:56 Received message from Camera: op=State serial=276858 12:24:56 GetSingleValue result=40 Value=cccccccc 12:24:56 SkyScan query 12:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:24:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:57 Parameters OK 12:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:57 Set A/D data flow result=40 12:24:57 Set A/D channel type result=40 12:24:57 Set A/D encoding result=40 12:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:57 Set channel filter=0.000000e+000 result=40 12:24:57 Config A/D Result=40 12:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:57 Get A/D filter: -9.255963e+061 result=40 12:24:57 Get A/D value=-858993460 result=40 12:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:57 Parameters OK 12:24:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:57 Set A/D data flow result=40 12:24:57 Set A/D channel type result=40 12:24:57 Set A/D encoding result=40 12:24:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:57 Set channel filter=0.000000e+000 result=40 12:24:57 Config A/D Result=40 12:24:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:57 Get A/D filter: -9.255963e+061 result=40 12:24:57 Get A/D value=-858993460 result=40 12:24:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:57 Aux= 12:24:57 Message to Camera, serial 276858 queued 12:25:34 Received message from Master: op=PointingHead serial=276871 12:25:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:25:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:25:34 Point started: ret=0 12:25:34 point_skyscan result=0 12:25:35 Check angles 12:25:35 SkyScan query 12:25:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:35 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:25:35 Message to Master queued w/err=0: serial=276871 error=0 12:25:40 Received message from Master: op=Filter serial=276872 12:25:40 Color wheel filter change from 0 to 0 12:25:40 FLIGetFilterPos err=0 currentPosition=0 12:25:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:40 Filter is already there-color wheel unchanged 12:25:41 Received message from Master: op=Shutter serial=276873 12:25:41 Shutter LASER close 12:25:41 Received message from Camera: op=State serial=276875 12:25:41 GetSingleValue result=40 Value=cccccccc 12:25:41 SkyScan query 12:25:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:25:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:41 Parameters OK 12:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:41 Set A/D data flow result=40 12:25:41 Set A/D channel type result=40 12:25:41 Set A/D encoding result=40 12:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:41 Set channel filter=0.000000e+000 result=40 12:25:41 Config A/D Result=40 12:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:41 Get A/D filter: -9.255963e+061 result=40 12:25:41 Get A/D value=-858993460 result=40 12:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:41 Parameters OK 12:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:41 Set A/D data flow result=40 12:25:41 Set A/D channel type result=40 12:25:41 Set A/D encoding result=40 12:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:41 Set channel filter=0.000000e+000 result=40 12:25:41 Config A/D Result=40 12:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:41 Get A/D filter: -9.255963e+061 result=40 12:25:41 Get A/D value=-858993460 result=40 12:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:41 Aux= 12:25:41 Message to Camera, serial 276875 queued 12:26:18 Received message from Master: op=PointingHead serial=276888 12:26:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:26:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:26:18 Point started: ret=0 12:26:18 point_skyscan result=0 12:26:19 Check angles 12:26:19 SkyScan query 12:26:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:20 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:26:20 Message to Master queued w/err=0: serial=276888 error=0 12:26:25 Received message from Master: op=Filter serial=276889 12:26:25 Color wheel filter change from 0 to 0 12:26:25 FLIGetFilterPos err=0 currentPosition=0 12:26:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:25 Filter is already there-color wheel unchanged 12:26:25 Received message from Master: op=Shutter serial=276890 12:26:25 Shutter LASER close 12:26:25 Received message from Camera: op=State serial=276892 12:26:25 GetSingleValue result=40 Value=cccccccc 12:26:25 SkyScan query 12:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:26:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:25 Parameters OK 12:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:25 Set A/D data flow result=40 12:26:25 Set A/D channel type result=40 12:26:25 Set A/D encoding result=40 12:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:25 Set channel filter=0.000000e+000 result=40 12:26:25 Config A/D Result=40 12:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:25 Get A/D filter: -9.255963e+061 result=40 12:26:25 Get A/D value=-858993460 result=40 12:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:25 Parameters OK 12:26:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:25 Set A/D data flow result=40 12:26:25 Set A/D channel type result=40 12:26:25 Set A/D encoding result=40 12:26:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:25 Set channel filter=0.000000e+000 result=40 12:26:25 Config A/D Result=40 12:26:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:25 Get A/D filter: -9.255963e+061 result=40 12:26:25 Get A/D value=-858993460 result=40 12:26:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:25 Aux= 12:26:25 Message to Camera, serial 276892 queued 12:27:02 Received message from Master: op=PointingHead serial=276905 12:27:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:27:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:27:03 Point started: ret=0 12:27:03 point_skyscan result=0 12:27:03 Check angles 12:27:03 SkyScan query 12:27:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.34<-13556 Statuses=0008 0009 12:27:04 Msec=0 True Az=112.995 Ze=-23.34 Az status=0008 Ze status=0009 12:27:04 Check angles 12:27:04 SkyScan query 12:27:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 12:27:05 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 12:27:05 Check angles 12:27:05 SkyScan query 12:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 12:27:06 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 12:27:06 Check angles 12:27:06 SkyScan query 12:27:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.09<-17806 Statuses=0008 0009 12:27:06 Msec=2250 True Az=112.995 Ze=-87.09 Az status=0008 Ze status=0009 12:27:06 Check angles 12:27:06 SkyScan query 12:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 12:27:07 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 12:27:07 Check angles 12:27:07 SkyScan query 12:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.97<-20598 Statuses=0008 0009 12:27:08 Msec=3750 True Az=112.995 Ze=-128.97 Az status=0008 Ze status=0009 12:27:08 Check angles 12:27:08 SkyScan query 12:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.955<-21997 Statuses=0008 0009 12:27:09 Msec=4500 True Az=112.995 Ze=-149.955 Az status=0008 Ze status=0009 12:27:09 Check angles 12:27:09 SkyScan query 12:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.82<-23388 Statuses=0008 0009 12:27:09 Msec=5250 True Az=112.995 Ze=-170.82 Az status=0008 Ze status=0009 12:27:09 Check angles 12:27:09 SkyScan query 12:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:27:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:27:10 Message to Master queued w/err=0: serial=276905 error=0 12:27:15 Received message from Master: op=Filter serial=276906 12:27:15 Color wheel filter change from 0 to 0 12:27:15 FLIGetFilterPos err=0 currentPosition=0 12:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:15 Filter is already there-color wheel unchanged 12:27:15 Received message from Master: op=Shutter serial=276907 12:27:15 Shutter LASER open 12:27:15 Received message from Camera: op=State serial=276909 12:27:15 GetSingleValue result=40 Value=cccccccc 12:27:15 SkyScan query 12:27:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:16 Parameters OK 12:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:16 Set A/D data flow result=40 12:27:16 Set A/D channel type result=40 12:27:16 Set A/D encoding result=40 12:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:16 Set channel filter=0.000000e+000 result=40 12:27:16 Config A/D Result=40 12:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:16 Get A/D filter: -9.255963e+061 result=40 12:27:16 Get A/D value=-858993460 result=40 12:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:16 Parameters OK 12:27:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:16 Set A/D data flow result=40 12:27:16 Set A/D channel type result=40 12:27:16 Set A/D encoding result=40 12:27:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:16 Set channel filter=0.000000e+000 result=40 12:27:16 Config A/D Result=40 12:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:16 Get A/D filter: -9.255963e+061 result=40 12:27:16 Get A/D value=-858993460 result=40 12:27:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:16 Aux= 12:27:16 Message to Camera, serial 276909 queued 12:27:24 Received message from Master: op=Shutter serial=276919 12:27:24 Shutter LASER close 12:27:25 Received message from Master: op=PointingHead serial=276923 12:27:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:27:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:27:25 Point started: ret=0 12:27:25 point_skyscan result=0 12:27:26 Check angles 12:27:26 SkyScan query 12:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.71<-21514 Statuses=0008 0009 12:27:27 Msec=0 True Az=112.995 Ze=-142.71 Az status=0008 Ze status=0009 12:27:27 Check angles 12:27:27 SkyScan query 12:27:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.215<-20081 Statuses=0008 0009 12:27:27 Msec=750 True Az=112.995 Ze=-121.215 Az status=0008 Ze status=0009 12:27:28 Check angles 12:27:28 SkyScan query 12:27:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.335<-18689 Statuses=0008 0009 12:27:28 Msec=1500 True Az=112.995 Ze=-100.335 Az status=0008 Ze status=0009 12:27:28 Check angles 12:27:28 SkyScan query 12:27:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 12:27:29 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 12:27:29 Check angles 12:27:29 SkyScan query 12:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 12:27:30 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 12:27:30 Check angles 12:27:30 SkyScan query 12:27:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 12:27:30 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 12:27:31 Check angles 12:27:31 SkyScan query 12:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.515<-13101 Statuses=0008 0009 12:27:31 Msec=4500 True Az=112.995 Ze=-16.515 Az status=0008 Ze status=0009 12:27:31 Check angles 12:27:31 SkyScan query 12:27:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.335<-11711 Statuses=0008 0009 12:27:32 Msec=5250 True Az=112.995 Ze=4.335 Az status=0008 Ze status=0009 12:27:32 Check angles 12:27:32 SkyScan query 12:27:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:27:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:27:33 Message to Master queued w/err=0: serial=276923 error=0 12:27:38 Received message from Master: op=Filter serial=276924 12:27:38 Color wheel filter change from 0 to 0 12:27:38 FLIGetFilterPos err=0 currentPosition=0 12:27:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:38 Filter is already there-color wheel unchanged 12:27:38 Received message from Master: op=Shutter serial=276925 12:27:38 Shutter LASER close 12:27:38 Received message from Camera: op=State serial=276927 12:27:38 GetSingleValue result=40 Value=cccccccc 12:27:38 SkyScan query 12:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:27:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:39 Parameters OK 12:27:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:39 Set A/D data flow result=40 12:27:39 Set A/D channel type result=40 12:27:39 Set A/D encoding result=40 12:27:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:39 Set channel filter=0.000000e+000 result=40 12:27:39 Config A/D Result=40 12:27:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:39 Get A/D filter: -9.255963e+061 result=40 12:27:39 Get A/D value=-858993460 result=40 12:27:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:39 Parameters OK 12:27:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:39 Set A/D data flow result=40 12:27:39 Set A/D channel type result=40 12:27:39 Set A/D encoding result=40 12:27:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:39 Set channel filter=0.000000e+000 result=40 12:27:39 Config A/D Result=40 12:27:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:39 Get A/D filter: -9.255963e+061 result=40 12:27:39 Get A/D value=-858993460 result=40 12:27:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:39 Aux= 12:27:39 Message to Camera, serial 276927 queued 12:28:15 Received message from Master: op=PointingHead serial=276940 12:28:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:28:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:28:16 Point started: ret=0 12:28:16 point_skyscan result=0 12:28:17 Check angles 12:28:17 SkyScan query 12:28:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:28:17 Message to Master queued w/err=0: serial=276940 error=0 12:28:22 Received message from Master: op=Filter serial=276941 12:28:22 Color wheel filter change from 0 to 0 12:28:22 FLIGetFilterPos err=0 currentPosition=0 12:28:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:22 Filter is already there-color wheel unchanged 12:28:22 Received message from Master: op=Shutter serial=276942 12:28:22 Shutter LASER close 12:28:22 Received message from Camera: op=State serial=276944 12:28:22 GetSingleValue result=40 Value=cccccccc 12:28:22 SkyScan query 12:28:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:28:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:23 Parameters OK 12:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:23 Set A/D data flow result=40 12:28:23 Set A/D channel type result=40 12:28:23 Set A/D encoding result=40 12:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:23 Set channel filter=0.000000e+000 result=40 12:28:23 Config A/D Result=40 12:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:23 Get A/D filter: -9.255963e+061 result=40 12:28:23 Get A/D value=-858993460 result=40 12:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:23 Parameters OK 12:28:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:23 Set A/D data flow result=40 12:28:23 Set A/D channel type result=40 12:28:23 Set A/D encoding result=40 12:28:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:23 Set channel filter=0.000000e+000 result=40 12:28:23 Config A/D Result=40 12:28:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:23 Get A/D filter: -9.255963e+061 result=40 12:28:23 Get A/D value=-858993460 result=40 12:28:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:23 Aux= 12:28:23 Message to Camera, serial 276944 queued 12:29:00 Received message from Master: op=PointingHead serial=276957 12:29:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:29:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:29:00 Point started: ret=0 12:29:00 point_skyscan result=0 12:29:01 Check angles 12:29:01 SkyScan query 12:29:01 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:29:01 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:29:02 Check angles 12:29:02 SkyScan query 12:29:02 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 12:29:02 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 12:29:02 Check angles 12:29:02 SkyScan query 12:29:03 SkyScan query done: ret=0 az=171.36<-11424 ze=-6.495<-12433 Statuses=0009 0008 12:29:03 Msec=1500 True Az=171.36 Ze=-6.495 Az status=0009 Ze status=0008 12:29:03 Check angles 12:29:03 SkyScan query 12:29:04 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:29:04 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:29:04 Message to Master queued w/err=0: serial=276957 error=0 12:29:09 Received message from Master: op=Filter serial=276958 12:29:09 Color wheel filter change from 0 to 0 12:29:09 FLIGetFilterPos err=0 currentPosition=0 12:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:09 Filter is already there-color wheel unchanged 12:29:09 Received message from Master: op=Shutter serial=276959 12:29:09 Shutter LASER close 12:29:09 Received message from Camera: op=State serial=276961 12:29:09 GetSingleValue result=40 Value=cccccccc 12:29:09 SkyScan query 12:29:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:09 Parameters OK 12:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:09 Set A/D data flow result=40 12:29:09 Set A/D channel type result=40 12:29:09 Set A/D encoding result=40 12:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:09 Set channel filter=0.000000e+000 result=40 12:29:09 Config A/D Result=40 12:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:09 Get A/D filter: -9.255963e+061 result=40 12:29:09 Get A/D value=-858993460 result=40 12:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:09 Parameters OK 12:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:09 Set A/D data flow result=40 12:29:09 Set A/D channel type result=40 12:29:09 Set A/D encoding result=40 12:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:09 Set channel filter=0.000000e+000 result=40 12:29:09 Config A/D Result=40 12:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:09 Get A/D filter: -9.255963e+061 result=40 12:29:09 Get A/D value=-858993460 result=40 12:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:09 Aux= 12:29:09 Message to Camera, serial 276961 queued 12:29:46 Received message from Master: op=PointingHead serial=276974 12:29:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:29:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:29:47 Point started: ret=0 12:29:47 point_skyscan result=0 12:29:47 Check angles 12:29:47 SkyScan query 12:29:48 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 12:29:48 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 12:29:48 Check angles 12:29:48 SkyScan query 12:29:49 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 12:29:49 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 12:29:49 Check angles 12:29:49 SkyScan query 12:29:49 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 12:29:49 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 12:29:50 Check angles 12:29:50 SkyScan query 12:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:50 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:29:50 Message to Master queued w/err=0: serial=276974 error=0 12:29:55 Received message from Master: op=Filter serial=276975 12:29:55 Color wheel filter change from 0 to 0 12:29:55 FLIGetFilterPos err=0 currentPosition=0 12:29:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:55 Filter is already there-color wheel unchanged 12:29:55 Received message from Master: op=Shutter serial=276976 12:29:55 Shutter LASER close 12:29:55 Received message from Camera: op=State serial=276978 12:29:55 GetSingleValue result=40 Value=cccccccc 12:29:55 SkyScan query 12:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:29:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:56 Parameters OK 12:29:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:56 Set A/D data flow result=40 12:29:56 Set A/D channel type result=40 12:29:56 Set A/D encoding result=40 12:29:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:56 Set channel filter=0.000000e+000 result=40 12:29:56 Config A/D Result=40 12:29:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:56 Get A/D filter: -9.255963e+061 result=40 12:29:56 Get A/D value=-858993460 result=40 12:29:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:56 Parameters OK 12:29:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:56 Set A/D data flow result=40 12:29:56 Set A/D channel type result=40 12:29:56 Set A/D encoding result=40 12:29:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:56 Set channel filter=0.000000e+000 result=40 12:29:56 Config A/D Result=40 12:29:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:56 Get A/D filter: -9.255963e+061 result=40 12:29:56 Get A/D value=-858993460 result=40 12:29:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:56 Aux= 12:29:56 Message to Camera, serial 276978 queued 12:30:33 Received message from Master: op=PointingHead serial=276991 12:30:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:30:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:30:33 Point started: ret=0 12:30:33 point_skyscan result=0 12:30:34 Check angles 12:30:34 SkyScan query 12:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.16<-13544 Statuses=0008 0009 12:30:35 Msec=0 True Az=112.995 Ze=-23.16 Az status=0008 Ze status=0009 12:30:35 Check angles 12:30:35 SkyScan query 12:30:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.145<-14943 Statuses=0008 0009 12:30:35 Msec=750 True Az=112.995 Ze=-44.145 Az status=0008 Ze status=0009 12:30:35 Check angles 12:30:35 SkyScan query 12:30:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.055<-16337 Statuses=0008 0009 12:30:36 Msec=1500 True Az=112.995 Ze=-65.055 Az status=0008 Ze status=0009 12:30:36 Check angles 12:30:36 SkyScan query 12:30:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.43<-17762 Statuses=0008 0009 12:30:37 Msec=2250 True Az=112.995 Ze=-86.43 Az status=0008 Ze status=0009 12:30:37 Check angles 12:30:37 SkyScan query 12:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.37<-19158 Statuses=0008 0009 12:30:38 Msec=3000 True Az=112.995 Ze=-107.37 Az status=0008 Ze status=0009 12:30:38 Check angles 12:30:38 SkyScan query 12:30:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.325<-20555 Statuses=0008 0009 12:30:38 Msec=3750 True Az=112.995 Ze=-128.325 Az status=0008 Ze status=0009 12:30:38 Check angles 12:30:38 SkyScan query 12:30:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.76<-21984 Statuses=0008 0009 12:30:39 Msec=4500 True Az=112.995 Ze=-149.76 Az status=0008 Ze status=0009 12:30:39 Check angles 12:30:39 SkyScan query 12:30:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.685<-23379 Statuses=0008 0009 12:30:40 Msec=5250 True Az=112.995 Ze=-170.685 Az status=0008 Ze status=0009 12:30:40 Check angles 12:30:40 SkyScan query 12:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:30:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:30:41 Message to Master queued w/err=0: serial=276991 error=0 12:30:46 Received message from Master: op=Filter serial=276992 12:30:46 Color wheel filter change from 0 to 0 12:30:46 FLIGetFilterPos err=0 currentPosition=0 12:30:46 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:46 Filter is already there-color wheel unchanged 12:30:46 Received message from Master: op=Shutter serial=276993 12:30:46 Shutter LASER open 12:30:46 Received message from Camera: op=State serial=276995 12:30:46 GetSingleValue result=40 Value=cccccccc 12:30:46 SkyScan query 12:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:47 Parameters OK 12:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:47 Set A/D data flow result=40 12:30:47 Set A/D channel type result=40 12:30:47 Set A/D encoding result=40 12:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:47 Set channel filter=0.000000e+000 result=40 12:30:47 Config A/D Result=40 12:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:47 Get A/D filter: -9.255963e+061 result=40 12:30:47 Get A/D value=-858993460 result=40 12:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:47 Parameters OK 12:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:47 Set A/D data flow result=40 12:30:47 Set A/D channel type result=40 12:30:47 Set A/D encoding result=40 12:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:47 Set channel filter=0.000000e+000 result=40 12:30:47 Config A/D Result=40 12:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:47 Get A/D filter: -9.255963e+061 result=40 12:30:47 Get A/D value=-858993460 result=40 12:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:47 Aux= 12:30:47 Message to Camera, serial 276995 queued 12:30:55 Received message from Master: op=Shutter serial=277005 12:30:55 Shutter LASER close 12:30:55 Received message from Master: op=PointingHead serial=277009 12:30:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:30:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:30:56 Point started: ret=0 12:30:56 point_skyscan result=0 12:30:57 Check angles 12:30:57 SkyScan query 12:30:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.92<-21528 Statuses=0008 0009 12:30:57 Msec=0 True Az=112.995 Ze=-142.92 Az status=0008 Ze status=0009 12:30:57 Check angles 12:30:57 SkyScan query 12:30:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 12:30:58 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 12:30:58 Check angles 12:30:58 SkyScan query 12:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.025<-18735 Statuses=0008 0009 12:30:59 Msec=1500 True Az=112.995 Ze=-101.025 Az status=0008 Ze status=0009 12:30:59 Check angles 12:30:59 SkyScan query 12:30:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.04<-17336 Statuses=0008 0009 12:30:59 Msec=2250 True Az=112.995 Ze=-80.04 Az status=0008 Ze status=0009 12:31:00 Check angles 12:31:00 SkyScan query 12:31:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.1<-15940 Statuses=0008 0009 12:31:00 Msec=3000 True Az=112.995 Ze=-59.1 Az status=0008 Ze status=0009 12:31:00 Check angles 12:31:00 SkyScan query 12:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.07<-14538 Statuses=0008 0009 12:31:01 Msec=3750 True Az=112.995 Ze=-38.07 Az status=0008 Ze status=0009 12:31:01 Check angles 12:31:01 SkyScan query 12:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.145<-13143 Statuses=0008 0009 12:31:02 Msec=4500 True Az=112.995 Ze=-17.145 Az status=0008 Ze status=0009 12:31:02 Check angles 12:31:02 SkyScan query 12:31:02 SkyScan query done: ret=0 az=112.995<-7533 ze=3.825<-11745 Statuses=0008 0009 12:31:02 Msec=5250 True Az=112.995 Ze=3.825 Az status=0008 Ze status=0009 12:31:03 Check angles 12:31:03 SkyScan query 12:31:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:31:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:31:03 Message to Master queued w/err=0: serial=277009 error=0 12:31:08 Received message from Master: op=Filter serial=277010 12:31:08 Color wheel filter change from 0 to 0 12:31:08 FLIGetFilterPos err=0 currentPosition=0 12:31:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:08 Filter is already there-color wheel unchanged 12:31:08 Received message from Master: op=Shutter serial=277011 12:31:08 Shutter LASER close 12:31:08 Received message from Camera: op=State serial=277013 12:31:08 GetSingleValue result=40 Value=cccccccc 12:31:08 SkyScan query 12:31:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:09 Parameters OK 12:31:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:09 Set A/D data flow result=40 12:31:09 Set A/D channel type result=40 12:31:09 Set A/D encoding result=40 12:31:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:09 Set channel filter=0.000000e+000 result=40 12:31:09 Config A/D Result=40 12:31:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:09 Get A/D filter: -9.255963e+061 result=40 12:31:09 Get A/D value=-858993460 result=40 12:31:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:09 Parameters OK 12:31:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:09 Set A/D data flow result=40 12:31:09 Set A/D channel type result=40 12:31:09 Set A/D encoding result=40 12:31:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:09 Set channel filter=0.000000e+000 result=40 12:31:09 Config A/D Result=40 12:31:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:09 Get A/D filter: -9.255963e+061 result=40 12:31:09 Get A/D value=-858993460 result=40 12:31:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:09 Aux= 12:31:09 Message to Camera, serial 277013 queued 12:31:46 Received message from Master: op=PointingHead serial=277026 12:31:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:31:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:31:46 Point started: ret=0 12:31:46 point_skyscan result=0 12:31:47 Check angles 12:31:47 SkyScan query 12:31:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:31:48 Message to Master queued w/err=0: serial=277026 error=0 12:31:53 Received message from Master: op=Filter serial=277027 12:31:53 Color wheel filter change from 0 to 0 12:31:53 FLIGetFilterPos err=0 currentPosition=0 12:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:53 Filter is already there-color wheel unchanged 12:31:53 Received message from Master: op=Shutter serial=277028 12:31:53 Shutter LASER close 12:31:53 Received message from Camera: op=State serial=277030 12:31:53 GetSingleValue result=40 Value=cccccccc 12:31:53 SkyScan query 12:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:31:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:53 Parameters OK 12:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:53 Set A/D data flow result=40 12:31:53 Set A/D channel type result=40 12:31:53 Set A/D encoding result=40 12:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:53 Set channel filter=0.000000e+000 result=40 12:31:53 Config A/D Result=40 12:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:53 Get A/D filter: -9.255963e+061 result=40 12:31:53 Get A/D value=-858993460 result=40 12:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:53 Parameters OK 12:31:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:53 Set A/D data flow result=40 12:31:53 Set A/D channel type result=40 12:31:53 Set A/D encoding result=40 12:31:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:53 Set channel filter=0.000000e+000 result=40 12:31:53 Config A/D Result=40 12:31:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:53 Get A/D filter: -9.255963e+061 result=40 12:31:53 Get A/D value=-858993460 result=40 12:31:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:53 Aux= 12:31:53 Message to Camera, serial 277030 queued 12:32:30 Received message from Master: op=PointingHead serial=277043 12:32:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:32:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:32:31 Point started: ret=0 12:32:31 point_skyscan result=0 12:32:31 Check angles 12:32:31 SkyScan query 12:32:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:32:32 Message to Master queued w/err=0: serial=277043 error=0 12:32:37 Received message from Master: op=Filter serial=277044 12:32:37 Color wheel filter change from 0 to 0 12:32:37 FLIGetFilterPos err=0 currentPosition=0 12:32:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:37 Filter is already there-color wheel unchanged 12:32:37 Received message from Master: op=Shutter serial=277045 12:32:37 Shutter LASER close 12:32:37 Received message from Camera: op=State serial=277047 12:32:37 GetSingleValue result=40 Value=cccccccc 12:32:37 SkyScan query 12:32:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:32:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:38 Parameters OK 12:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:38 Set A/D data flow result=40 12:32:38 Set A/D channel type result=40 12:32:38 Set A/D encoding result=40 12:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:38 Set channel filter=0.000000e+000 result=40 12:32:38 Config A/D Result=40 12:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:38 Get A/D filter: -9.255963e+061 result=40 12:32:38 Get A/D value=-858993460 result=40 12:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:38 Parameters OK 12:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:38 Set A/D data flow result=40 12:32:38 Set A/D channel type result=40 12:32:38 Set A/D encoding result=40 12:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:38 Set channel filter=0.000000e+000 result=40 12:32:38 Config A/D Result=40 12:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:38 Get A/D filter: -9.255963e+061 result=40 12:32:38 Get A/D value=-858993460 result=40 12:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:38 Aux= 12:32:38 Message to Camera, serial 277047 queued 12:33:13 Received message from Master: op=PointingHead serial=277059 12:33:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:33:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:33:14 Point started: ret=0 12:33:14 point_skyscan result=0 12:33:15 Check angles 12:33:15 SkyScan query 12:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:33:15 Message to Master queued w/err=0: serial=277059 error=0 12:33:20 Received message from Master: op=Filter serial=277060 12:33:20 Color wheel filter change from 0 to 0 12:33:20 FLIGetFilterPos err=0 currentPosition=0 12:33:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:20 Filter is already there-color wheel unchanged 12:33:20 Received message from Master: op=Shutter serial=277061 12:33:20 Shutter LASER close 12:33:20 Received message from Camera: op=State serial=277063 12:33:20 GetSingleValue result=40 Value=cccccccc 12:33:20 SkyScan query 12:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:33:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:21 Parameters OK 12:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:21 Set A/D data flow result=40 12:33:21 Set A/D channel type result=40 12:33:21 Set A/D encoding result=40 12:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:21 Set channel filter=0.000000e+000 result=40 12:33:21 Config A/D Result=40 12:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:21 Get A/D filter: -9.255963e+061 result=40 12:33:21 Get A/D value=-858993460 result=40 12:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:21 Parameters OK 12:33:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:21 Set A/D data flow result=40 12:33:21 Set A/D channel type result=40 12:33:21 Set A/D encoding result=40 12:33:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:21 Set channel filter=0.000000e+000 result=40 12:33:21 Config A/D Result=40 12:33:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:21 Get A/D filter: -9.255963e+061 result=40 12:33:21 Get A/D value=-858993460 result=40 12:33:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:21 Aux= 12:33:21 Message to Camera, serial 277063 queued 12:33:35 Received message from Master: op=Identify serial=277064 12:33:58 Received message from Master: op=PointingHead serial=277079 12:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:33:58 Point started: ret=0 12:33:58 point_skyscan result=0 12:33:59 Check angles 12:33:59 SkyScan query 12:33:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 12:33:59 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 12:34:00 Check angles 12:34:00 SkyScan query 12:34:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.31<-14954 Statuses=0008 0009 12:34:00 Msec=750 True Az=112.995 Ze=-44.31 Az status=0008 Ze status=0009 12:34:00 Check angles 12:34:00 SkyScan query 12:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.25<-16350 Statuses=0008 0009 12:34:01 Msec=1500 True Az=112.995 Ze=-65.25 Az status=0008 Ze status=0009 12:34:01 Check angles 12:34:01 SkyScan query 12:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.205<-17747 Statuses=0008 0009 12:34:02 Msec=2250 True Az=112.995 Ze=-86.205 Az status=0008 Ze status=0009 12:34:02 Check angles 12:34:02 SkyScan query 12:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.13<-19142 Statuses=0008 0009 12:34:02 Msec=3000 True Az=112.995 Ze=-107.13 Az status=0008 Ze status=0009 12:34:03 Check angles 12:34:03 SkyScan query 12:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.1<-20540 Statuses=0008 0009 12:34:03 Msec=3750 True Az=112.995 Ze=-128.1 Az status=0008 Ze status=0009 12:34:03 Check angles 12:34:03 SkyScan query 12:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.07<-21938 Statuses=0008 0009 12:34:04 Msec=4500 True Az=112.995 Ze=-149.07 Az status=0008 Ze status=0009 12:34:04 Check angles 12:34:04 SkyScan query 12:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.01<-23334 Statuses=0008 0009 12:34:05 Msec=5250 True Az=112.995 Ze=-170.01 Az status=0008 Ze status=0009 12:34:05 Check angles 12:34:05 SkyScan query 12:34:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:34:05 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:34:05 Message to Master queued w/err=0: serial=277079 error=0 12:34:10 Received message from Master: op=Filter serial=277080 12:34:10 Color wheel filter change from 0 to 0 12:34:10 FLIGetFilterPos err=0 currentPosition=0 12:34:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:10 Filter is already there-color wheel unchanged 12:34:11 Received message from Master: op=Shutter serial=277081 12:34:11 Shutter LASER open 12:34:11 Received message from Camera: op=State serial=277083 12:34:11 GetSingleValue result=40 Value=cccccccc 12:34:11 SkyScan query 12:34:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 [UTC 2019-3-14 12:34:11] 12:34:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:11 Parameters OK 12:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:11 Set A/D data flow result=40 12:34:11 Set A/D channel type result=40 12:34:11 Set A/D encoding result=40 12:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:11 Set channel filter=0.000000e+000 result=40 12:34:11 Config A/D Result=40 12:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:11 Get A/D filter: -9.255963e+061 result=40 12:34:11 Get A/D value=-858993460 result=40 12:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:11 Parameters OK 12:34:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:11 Set A/D data flow result=40 12:34:11 Set A/D channel type result=40 12:34:11 Set A/D encoding result=40 12:34:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:11 Set channel filter=0.000000e+000 result=40 12:34:11 Config A/D Result=40 12:34:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:11 Get A/D filter: -9.255963e+061 result=40 12:34:11 Get A/D value=-858993460 result=40 12:34:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:11 Aux= 12:34:11 Message to Camera, serial 277083 queued 12:34:20 Received message from Master: op=Shutter serial=277093 12:34:20 Shutter LASER close 12:34:20 Received message from Master: op=PointingHead serial=277097 12:34:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:34:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:34:21 Point started: ret=0 12:34:21 point_skyscan result=0 12:34:22 Check angles 12:34:22 SkyScan query 12:34:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 12:34:22 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 12:34:22 Check angles 12:34:22 SkyScan query 12:34:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.46<-20164 Statuses=0008 0009 12:34:23 Msec=750 True Az=112.995 Ze=-122.46 Az status=0008 Ze status=0009 12:34:23 Check angles 12:34:23 SkyScan query 12:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.505<-18767 Statuses=0008 0009 12:34:24 Msec=1500 True Az=112.995 Ze=-101.505 Az status=0008 Ze status=0009 12:34:24 Check angles 12:34:24 SkyScan query 12:34:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.52<-17368 Statuses=0008 0009 12:34:24 Msec=2250 True Az=112.995 Ze=-80.52 Az status=0008 Ze status=0009 12:34:25 Check angles 12:34:25 SkyScan query 12:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.595<-15973 Statuses=0008 0009 12:34:25 Msec=3000 True Az=112.995 Ze=-59.595 Az status=0008 Ze status=0009 12:34:25 Check angles 12:34:25 SkyScan query 12:34:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.61<-14574 Statuses=0008 0009 12:34:26 Msec=3750 True Az=112.995 Ze=-38.61 Az status=0008 Ze status=0009 12:34:26 Check angles 12:34:26 SkyScan query 12:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.67<-13178 Statuses=0008 0009 12:34:27 Msec=4500 True Az=112.995 Ze=-17.67 Az status=0008 Ze status=0009 12:34:27 Check angles 12:34:27 SkyScan query 12:34:27 SkyScan query done: ret=0 az=112.995<-7533 ze=3.315<-11779 Statuses=0008 0009 12:34:27 Msec=5250 True Az=112.995 Ze=3.315 Az status=0008 Ze status=0009 12:34:28 Check angles 12:34:28 SkyScan query 12:34:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:34:28 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:34:28 Message to Master queued w/err=0: serial=277097 error=0 12:34:33 Received message from Master: op=Filter serial=277098 12:34:33 Color wheel filter change from 0 to 0 12:34:33 FLIGetFilterPos err=0 currentPosition=0 12:34:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:33 Filter is already there-color wheel unchanged 12:34:33 Received message from Master: op=Shutter serial=277099 12:34:33 Shutter LASER close 12:34:33 Received message from Camera: op=State serial=277101 12:34:33 GetSingleValue result=40 Value=cccccccc 12:34:33 SkyScan query 12:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:34:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:34 Parameters OK 12:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:34 Set A/D data flow result=40 12:34:34 Set A/D channel type result=40 12:34:34 Set A/D encoding result=40 12:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:34 Set channel filter=0.000000e+000 result=40 12:34:34 Config A/D Result=40 12:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:34 Get A/D filter: -9.255963e+061 result=40 12:34:34 Get A/D value=-858993460 result=40 12:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:34 Parameters OK 12:34:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:34 Set A/D data flow result=40 12:34:34 Set A/D channel type result=40 12:34:34 Set A/D encoding result=40 12:34:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:34 Set channel filter=0.000000e+000 result=40 12:34:34 Config A/D Result=40 12:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:34 Get A/D filter: -9.255963e+061 result=40 12:34:34 Get A/D value=-858993460 result=40 12:34:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:34 Aux= 12:34:34 Message to Camera, serial 277101 queued 12:35:11 Received message from Master: op=PointingHead serial=277114 12:35:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:35:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:35:11 Point started: ret=0 12:35:11 point_skyscan result=0 12:35:12 Check angles 12:35:12 SkyScan query 12:35:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:35:13 Message to Master queued w/err=0: serial=277114 error=0 12:35:18 Received message from Master: op=Filter serial=277115 12:35:18 Color wheel filter change from 0 to 0 12:35:18 FLIGetFilterPos err=0 currentPosition=0 12:35:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:18 Filter is already there-color wheel unchanged 12:35:18 Received message from Master: op=Shutter serial=277116 12:35:18 Shutter LASER close 12:35:18 Received message from Camera: op=State serial=277118 12:35:18 GetSingleValue result=40 Value=cccccccc 12:35:18 SkyScan query 12:35:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:35:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:18 Parameters OK 12:35:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:18 Set A/D data flow result=40 12:35:18 Set A/D channel type result=40 12:35:18 Set A/D encoding result=40 12:35:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:18 Set channel filter=0.000000e+000 result=40 12:35:18 Config A/D Result=40 12:35:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:18 Get A/D filter: -9.255963e+061 result=40 12:35:18 Get A/D value=-858993460 result=40 12:35:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:18 Parameters OK 12:35:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:18 Set A/D data flow result=40 12:35:18 Set A/D channel type result=40 12:35:18 Set A/D encoding result=40 12:35:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:18 Set channel filter=0.000000e+000 result=40 12:35:18 Config A/D Result=40 12:35:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:18 Get A/D filter: -9.255963e+061 result=40 12:35:18 Get A/D value=-858993460 result=40 12:35:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:18 Aux= 12:35:18 Message to Camera, serial 277118 queued 12:35:55 Received message from Master: op=PointingHead serial=277131 12:35:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:35:55 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:35:56 Point started: ret=0 12:35:56 point_skyscan result=0 12:35:56 Check angles 12:35:56 SkyScan query 12:35:57 SkyScan query done: ret=0 az=135.945<-9063 ze=-6.51<-12434 Statuses=0009 0008 12:35:57 Msec=0 True Az=135.945 Ze=-6.51 Az status=0009 Ze status=0008 12:35:57 Check angles 12:35:57 SkyScan query 12:35:58 SkyScan query done: ret=0 az=153.435<-10229 ze=-6.495<-12433 Statuses=0009 0008 12:35:58 Msec=750 True Az=153.435 Ze=-6.495 Az status=0009 Ze status=0008 12:35:58 Check angles 12:35:58 SkyScan query 12:35:58 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 12:35:58 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 12:35:59 Check angles 12:35:59 SkyScan query 12:35:59 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:35:59 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:35:59 Message to Master queued w/err=0: serial=277131 error=0 12:36:04 Received message from Master: op=Filter serial=277132 12:36:04 Color wheel filter change from 0 to 0 12:36:04 FLIGetFilterPos err=0 currentPosition=0 12:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:04 Filter is already there-color wheel unchanged 12:36:04 Received message from Master: op=Shutter serial=277133 12:36:04 Shutter LASER close 12:36:04 Received message from Camera: op=State serial=277135 12:36:04 GetSingleValue result=40 Value=cccccccc 12:36:04 SkyScan query 12:36:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:05 Parameters OK 12:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:05 Set A/D data flow result=40 12:36:05 Set A/D channel type result=40 12:36:05 Set A/D encoding result=40 12:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:05 Set channel filter=0.000000e+000 result=40 12:36:05 Config A/D Result=40 12:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:05 Get A/D filter: -9.255963e+061 result=40 12:36:05 Get A/D value=-858993460 result=40 12:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:05 Parameters OK 12:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:05 Set A/D data flow result=40 12:36:05 Set A/D channel type result=40 12:36:05 Set A/D encoding result=40 12:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:05 Set channel filter=0.000000e+000 result=40 12:36:05 Config A/D Result=40 12:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:05 Get A/D filter: -9.255963e+061 result=40 12:36:05 Get A/D value=-858993460 result=40 12:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:05 Aux= 12:36:05 Message to Camera, serial 277135 queued 12:36:42 Received message from Master: op=PointingHead serial=277148 12:36:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:36:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:36:42 Point started: ret=0 12:36:42 point_skyscan result=0 12:36:43 Check angles 12:36:43 SkyScan query 12:36:43 SkyScan query done: ret=0 az=152.745<-10183 ze=6.51<-11566 Statuses=0009 0008 12:36:43 Msec=0 True Az=152.745 Ze=6.51 Az status=0009 Ze status=0008 12:36:44 Check angles 12:36:44 SkyScan query 12:36:44 SkyScan query done: ret=0 az=134.82<-8988 ze=6.495<-11567 Statuses=0009 0008 12:36:44 Msec=750 True Az=134.82 Ze=6.495 Az status=0009 Ze status=0008 12:36:44 Check angles 12:36:44 SkyScan query 12:36:45 SkyScan query done: ret=0 az=117.495<-7833 ze=6.495<-11567 Statuses=0009 0008 12:36:45 Msec=1500 True Az=117.495 Ze=6.495 Az status=0009 Ze status=0008 12:36:45 Check angles 12:36:45 SkyScan query 12:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:46 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:36:46 Message to Master queued w/err=0: serial=277148 error=0 12:36:51 Received message from Master: op=Filter serial=277149 12:36:51 Color wheel filter change from 0 to 0 12:36:51 FLIGetFilterPos err=0 currentPosition=0 12:36:51 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:51 Filter is already there-color wheel unchanged 12:36:51 Received message from Master: op=Shutter serial=277150 12:36:51 Shutter LASER close 12:36:51 Received message from Camera: op=State serial=277152 12:36:51 GetSingleValue result=40 Value=cccccccc 12:36:51 SkyScan query 12:36:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:52 Parameters OK 12:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:52 Set A/D data flow result=40 12:36:52 Set A/D channel type result=40 12:36:52 Set A/D encoding result=40 12:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:52 Set channel filter=0.000000e+000 result=40 12:36:52 Config A/D Result=40 12:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:52 Get A/D filter: -9.255963e+061 result=40 12:36:52 Get A/D value=-858993460 result=40 12:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:52 Parameters OK 12:36:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:52 Set A/D data flow result=40 12:36:52 Set A/D channel type result=40 12:36:52 Set A/D encoding result=40 12:36:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:52 Set channel filter=0.000000e+000 result=40 12:36:52 Config A/D Result=40 12:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:52 Get A/D filter: -9.255963e+061 result=40 12:36:52 Get A/D value=-858993460 result=40 12:36:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:52 Aux= 12:36:52 Message to Camera, serial 277152 queued 12:37:28 Received message from Master: op=PointingHead serial=277165 12:37:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:37:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:37:29 Point started: ret=0 12:37:29 point_skyscan result=0 12:37:29 Check angles 12:37:29 SkyScan query 12:37:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.31<-13554 Statuses=0008 0009 12:37:30 Msec=0 True Az=112.995 Ze=-23.31 Az status=0008 Ze status=0009 12:37:30 Check angles 12:37:30 SkyScan query 12:37:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.67<-14978 Statuses=0008 0009 12:37:31 Msec=750 True Az=112.995 Ze=-44.67 Az status=0008 Ze status=0009 12:37:31 Check angles 12:37:31 SkyScan query 12:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.09<-16406 Statuses=0008 0009 12:37:32 Msec=1500 True Az=112.995 Ze=-66.09 Az status=0008 Ze status=0009 12:37:32 Check angles 12:37:32 SkyScan query 12:37:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.495<-17833 Statuses=0008 0009 12:37:32 Msec=2250 True Az=112.995 Ze=-87.495 Az status=0008 Ze status=0009 12:37:33 Check angles 12:37:33 SkyScan query 12:37:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.42<-19228 Statuses=0008 0009 12:37:33 Msec=3000 True Az=112.995 Ze=-108.42 Az status=0008 Ze status=0009 12:37:33 Check angles 12:37:33 SkyScan query 12:37:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.795<-20653 Statuses=0008 0009 12:37:34 Msec=3750 True Az=112.995 Ze=-129.795 Az status=0008 Ze status=0009 12:37:34 Check angles 12:37:34 SkyScan query 12:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.17<-22078 Statuses=0008 0009 12:37:35 Msec=4500 True Az=112.995 Ze=-151.17 Az status=0008 Ze status=0009 12:37:35 Check angles 12:37:35 SkyScan query 12:37:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.735<-23449 Statuses=0008 0009 12:37:35 Msec=5250 True Az=112.995 Ze=-171.735 Az status=0008 Ze status=0009 12:37:36 Check angles 12:37:36 SkyScan query 12:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:37:36 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:37:36 Message to Master queued w/err=0: serial=277165 error=0 12:37:41 Received message from Master: op=Filter serial=277166 12:37:41 Color wheel filter change from 0 to 0 12:37:41 FLIGetFilterPos err=0 currentPosition=0 12:37:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:41 Filter is already there-color wheel unchanged 12:37:41 Received message from Master: op=Shutter serial=277167 12:37:41 Shutter LASER open 12:37:41 Received message from Camera: op=State serial=277169 12:37:41 GetSingleValue result=40 Value=cccccccc 12:37:41 SkyScan query 12:37:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:37:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:42 Parameters OK 12:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:42 Set A/D data flow result=40 12:37:42 Set A/D channel type result=40 12:37:42 Set A/D encoding result=40 12:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:42 Set channel filter=0.000000e+000 result=40 12:37:42 Config A/D Result=40 12:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:42 Get A/D filter: -9.255963e+061 result=40 12:37:42 Get A/D value=-858993460 result=40 12:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:42 Parameters OK 12:37:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:42 Set A/D data flow result=40 12:37:42 Set A/D channel type result=40 12:37:42 Set A/D encoding result=40 12:37:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:42 Set channel filter=0.000000e+000 result=40 12:37:42 Config A/D Result=40 12:37:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:42 Get A/D filter: -9.255963e+061 result=40 12:37:42 Get A/D value=-858993460 result=40 12:37:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:42 Aux= 12:37:42 Message to Camera, serial 277169 queued 12:37:50 Received message from Master: op=Shutter serial=277179 12:37:50 Shutter LASER close 12:37:51 Received message from Master: op=PointingHead serial=277183 12:37:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:37:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:37:51 Point started: ret=0 12:37:51 point_skyscan result=0 12:37:52 Check angles 12:37:52 SkyScan query 12:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.4<-21560 Statuses=0008 0009 12:37:53 Msec=0 True Az=112.995 Ze=-143.4 Az status=0008 Ze status=0009 12:37:53 Check angles 12:37:53 SkyScan query 12:37:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 12:37:53 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 12:37:54 Check angles 12:37:54 SkyScan query 12:37:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.1<-18740 Statuses=0008 0009 12:37:54 Msec=1500 True Az=112.995 Ze=-101.1 Az status=0008 Ze status=0009 12:37:54 Check angles 12:37:54 SkyScan query 12:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.115<-17341 Statuses=0008 0009 12:37:55 Msec=2250 True Az=112.995 Ze=-80.115 Az status=0008 Ze status=0009 12:37:55 Check angles 12:37:55 SkyScan query 12:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.175<-15945 Statuses=0008 0009 12:37:56 Msec=3000 True Az=112.995 Ze=-59.175 Az status=0008 Ze status=0009 12:37:56 Check angles 12:37:56 SkyScan query 12:37:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.16<-14544 Statuses=0008 0009 12:37:56 Msec=3750 True Az=112.995 Ze=-38.16 Az status=0008 Ze status=0009 12:37:57 Check angles 12:37:57 SkyScan query 12:37:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.235<-13149 Statuses=0008 0009 12:37:57 Msec=4500 True Az=112.995 Ze=-17.235 Az status=0008 Ze status=0009 12:37:57 Check angles 12:37:57 SkyScan query 12:37:58 SkyScan query done: ret=0 az=112.995<-7533 ze=3.75<-11750 Statuses=0008 0009 12:37:58 Msec=5250 True Az=112.995 Ze=3.75 Az status=0008 Ze status=0009 12:37:58 Check angles 12:37:58 SkyScan query 12:37:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:37:59 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:37:59 Message to Master queued w/err=0: serial=277183 error=0 12:38:04 Received message from Master: op=Filter serial=277184 12:38:04 Color wheel filter change from 0 to 0 12:38:04 FLIGetFilterPos err=0 currentPosition=0 12:38:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:04 Filter is already there-color wheel unchanged 12:38:04 Received message from Master: op=Shutter serial=277185 12:38:04 Shutter LASER close 12:38:04 Received message from Camera: op=State serial=277187 12:38:04 GetSingleValue result=40 Value=cccccccc 12:38:04 SkyScan query 12:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:05 Parameters OK 12:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:05 Set A/D data flow result=40 12:38:05 Set A/D channel type result=40 12:38:05 Set A/D encoding result=40 12:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:05 Set channel filter=0.000000e+000 result=40 12:38:05 Config A/D Result=40 12:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:05 Get A/D filter: -9.255963e+061 result=40 12:38:05 Get A/D value=-858993460 result=40 12:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:05 Parameters OK 12:38:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:05 Set A/D data flow result=40 12:38:05 Set A/D channel type result=40 12:38:05 Set A/D encoding result=40 12:38:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:05 Set channel filter=0.000000e+000 result=40 12:38:05 Config A/D Result=40 12:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:05 Get A/D filter: -9.255963e+061 result=40 12:38:05 Get A/D value=-858993460 result=40 12:38:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:05 Aux= 12:38:05 Message to Camera, serial 277187 queued 12:38:41 Received message from Master: op=PointingHead serial=277200 12:38:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:38:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:38:42 Point started: ret=0 12:38:42 point_skyscan result=0 12:38:42 Check angles 12:38:42 SkyScan query 12:38:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:43 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:38:43 Message to Master queued w/err=0: serial=277200 error=0 12:38:48 Received message from Master: op=Filter serial=277201 12:38:48 Color wheel filter change from 0 to 0 12:38:48 FLIGetFilterPos err=0 currentPosition=0 12:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:48 Filter is already there-color wheel unchanged 12:38:48 Received message from Master: op=Shutter serial=277202 12:38:48 Shutter LASER close 12:38:48 Received message from Camera: op=State serial=277204 12:38:48 GetSingleValue result=40 Value=cccccccc 12:38:48 SkyScan query 12:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:49 Parameters OK 12:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:49 Set A/D data flow result=40 12:38:49 Set A/D channel type result=40 12:38:49 Set A/D encoding result=40 12:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:49 Set channel filter=0.000000e+000 result=40 12:38:49 Config A/D Result=40 12:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:49 Get A/D filter: -9.255963e+061 result=40 12:38:49 Get A/D value=-858993460 result=40 12:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:49 Parameters OK 12:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:49 Set A/D data flow result=40 12:38:49 Set A/D channel type result=40 12:38:49 Set A/D encoding result=40 12:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:49 Set channel filter=0.000000e+000 result=40 12:38:49 Config A/D Result=40 12:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:49 Get A/D filter: -9.255963e+061 result=40 12:38:49 Get A/D value=-858993460 result=40 12:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:49 Aux= 12:38:49 Message to Camera, serial 277204 queued 12:39:26 Received message from Master: op=PointingHead serial=277217 12:39:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:39:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:39:26 Point started: ret=0 12:39:26 point_skyscan result=0 12:39:27 Check angles 12:39:27 SkyScan query 12:39:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:27 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:39:27 Message to Master queued w/err=0: serial=277217 error=0 12:39:32 Received message from Master: op=Filter serial=277218 12:39:32 Color wheel filter change from 0 to 0 12:39:32 FLIGetFilterPos err=0 currentPosition=0 12:39:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:32 Filter is already there-color wheel unchanged 12:39:33 Received message from Master: op=Shutter serial=277219 12:39:33 Shutter LASER close 12:39:33 Received message from Camera: op=State serial=277221 12:39:33 GetSingleValue result=40 Value=cccccccc 12:39:33 SkyScan query 12:39:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:39:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:33 Parameters OK 12:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:33 Set A/D data flow result=40 12:39:33 Set A/D channel type result=40 12:39:33 Set A/D encoding result=40 12:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:33 Set channel filter=0.000000e+000 result=40 12:39:33 Config A/D Result=40 12:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:33 Get A/D filter: -9.255963e+061 result=40 12:39:33 Get A/D value=-858993460 result=40 12:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:33 Parameters OK 12:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:33 Set A/D data flow result=40 12:39:33 Set A/D channel type result=40 12:39:33 Set A/D encoding result=40 12:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:33 Set channel filter=0.000000e+000 result=40 12:39:33 Config A/D Result=40 12:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:33 Get A/D filter: -9.255963e+061 result=40 12:39:33 Get A/D value=-858993460 result=40 12:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:33 Aux= 12:39:33 Message to Camera, serial 277221 queued 12:40:10 Received message from Master: op=PointingHead serial=277234 12:40:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:40:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:40:10 Point started: ret=0 12:40:10 point_skyscan result=0 12:40:11 Check angles 12:40:11 SkyScan query 12:40:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:40:12 Message to Master queued w/err=0: serial=277234 error=0 12:40:17 Received message from Master: op=Filter serial=277235 12:40:17 Color wheel filter change from 0 to 0 12:40:17 FLIGetFilterPos err=0 currentPosition=0 12:40:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:17 Filter is already there-color wheel unchanged 12:40:17 Received message from Master: op=Shutter serial=277236 12:40:17 Shutter LASER close 12:40:17 Received message from Camera: op=State serial=277238 12:40:17 GetSingleValue result=40 Value=cccccccc 12:40:17 SkyScan query 12:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:40:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:17 Parameters OK 12:40:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:17 Set A/D data flow result=40 12:40:17 Set A/D channel type result=40 12:40:17 Set A/D encoding result=40 12:40:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:17 Set channel filter=0.000000e+000 result=40 12:40:17 Config A/D Result=40 12:40:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:17 Get A/D filter: -9.255963e+061 result=40 12:40:17 Get A/D value=-858993460 result=40 12:40:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:17 Parameters OK 12:40:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:17 Set A/D data flow result=40 12:40:17 Set A/D channel type result=40 12:40:17 Set A/D encoding result=40 12:40:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:17 Set channel filter=0.000000e+000 result=40 12:40:17 Config A/D Result=40 12:40:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:17 Get A/D filter: -9.255963e+061 result=40 12:40:17 Get A/D value=-858993460 result=40 12:40:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:17 Aux= 12:40:17 Message to Camera, serial 277238 queued 12:40:54 Received message from Master: op=PointingHead serial=277251 12:40:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:40:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:40:55 Point started: ret=0 12:40:55 point_skyscan result=0 12:40:55 Check angles 12:40:55 SkyScan query 12:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 12:40:56 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 12:40:56 Check angles 12:40:56 SkyScan query 12:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 12:40:57 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 12:40:57 Check angles 12:40:57 SkyScan query 12:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.46<-16364 Statuses=0008 0009 12:40:58 Msec=1500 True Az=112.995 Ze=-65.46 Az status=0008 Ze status=0009 12:40:58 Check angles 12:40:58 SkyScan query 12:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.865<-17791 Statuses=0008 0009 12:40:58 Msec=2250 True Az=112.995 Ze=-86.865 Az status=0008 Ze status=0009 12:40:59 Check angles 12:40:59 SkyScan query 12:40:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.3<-19220 Statuses=0008 0009 12:40:59 Msec=3000 True Az=112.995 Ze=-108.3 Az status=0008 Ze status=0009 12:40:59 Check angles 12:40:59 SkyScan query 12:41:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.63<-20642 Statuses=0008 0009 12:41:00 Msec=3750 True Az=112.995 Ze=-129.63 Az status=0008 Ze status=0009 12:41:00 Check angles 12:41:00 SkyScan query 12:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.555<-22037 Statuses=0008 0009 12:41:01 Msec=4500 True Az=112.995 Ze=-150.555 Az status=0008 Ze status=0009 12:41:01 Check angles 12:41:01 SkyScan query 12:41:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.3<-23420 Statuses=0008 0009 12:41:01 Msec=5250 True Az=112.995 Ze=-171.3 Az status=0008 Ze status=0009 12:41:02 Check angles 12:41:02 SkyScan query 12:41:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:41:02 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:41:02 Message to Master queued w/err=0: serial=277251 error=0 12:41:07 Received message from Master: op=Filter serial=277252 12:41:07 Color wheel filter change from 0 to 0 12:41:07 FLIGetFilterPos err=0 currentPosition=0 12:41:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:07 Filter is already there-color wheel unchanged 12:41:07 Received message from Master: op=Shutter serial=277253 12:41:07 Shutter LASER open 12:41:07 Received message from Camera: op=State serial=277255 12:41:07 GetSingleValue result=40 Value=cccccccc 12:41:07 SkyScan query 12:41:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:08 Parameters OK 12:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:08 Set A/D data flow result=40 12:41:08 Set A/D channel type result=40 12:41:08 Set A/D encoding result=40 12:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:08 Set channel filter=0.000000e+000 result=40 12:41:08 Config A/D Result=40 12:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:08 Get A/D filter: -9.255963e+061 result=40 12:41:08 Get A/D value=-858993460 result=40 12:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:08 Parameters OK 12:41:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:08 Set A/D data flow result=40 12:41:08 Set A/D channel type result=40 12:41:08 Set A/D encoding result=40 12:41:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:08 Set channel filter=0.000000e+000 result=40 12:41:08 Config A/D Result=40 12:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:08 Get A/D filter: -9.255963e+061 result=40 12:41:08 Get A/D value=-858993460 result=40 12:41:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:08 Aux= 12:41:08 Message to Camera, serial 277255 queued 12:41:16 Received message from Master: op=Shutter serial=277265 12:41:16 Shutter LASER close 12:41:17 Received message from Master: op=PointingHead serial=277269 12:41:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:41:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:41:17 Point started: ret=0 12:41:17 point_skyscan result=0 12:41:18 Check angles 12:41:18 SkyScan query 12:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 12:41:19 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 12:41:19 Check angles 12:41:19 SkyScan query 12:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.04<-20136 Statuses=0008 0009 12:41:19 Msec=750 True Az=112.995 Ze=-122.04 Az status=0008 Ze status=0009 12:41:20 Check angles 12:41:20 SkyScan query 12:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.145<-18743 Statuses=0008 0009 12:41:20 Msec=1500 True Az=112.995 Ze=-101.145 Az status=0008 Ze status=0009 12:41:20 Check angles 12:41:20 SkyScan query 12:41:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.16<-17344 Statuses=0008 0009 12:41:21 Msec=2250 True Az=112.995 Ze=-80.16 Az status=0008 Ze status=0009 12:41:21 Check angles 12:41:21 SkyScan query 12:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 12:41:22 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 12:41:22 Check angles 12:41:22 SkyScan query 12:41:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.77<-14518 Statuses=0008 0009 12:41:22 Msec=3750 True Az=112.995 Ze=-37.77 Az status=0008 Ze status=0009 12:41:23 Check angles 12:41:23 SkyScan query 12:41:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 12:41:23 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 12:41:23 Check angles 12:41:23 SkyScan query 12:41:24 SkyScan query done: ret=0 az=112.995<-7533 ze=4.425<-11705 Statuses=0008 0009 12:41:24 Msec=5250 True Az=112.995 Ze=4.425 Az status=0008 Ze status=0009 12:41:24 Check angles 12:41:24 SkyScan query 12:41:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:41:25 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:41:25 Message to Master queued w/err=0: serial=277269 error=0 12:41:30 Received message from Master: op=Filter serial=277270 12:41:30 Color wheel filter change from 0 to 0 12:41:30 FLIGetFilterPos err=0 currentPosition=0 12:41:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:30 Filter is already there-color wheel unchanged 12:41:30 Received message from Master: op=Shutter serial=277271 12:41:30 Shutter LASER close 12:41:30 Received message from Camera: op=State serial=277273 12:41:30 GetSingleValue result=40 Value=cccccccc 12:41:30 SkyScan query 12:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:41:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:31 Parameters OK 12:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:31 Set A/D data flow result=40 12:41:31 Set A/D channel type result=40 12:41:31 Set A/D encoding result=40 12:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:31 Set channel filter=0.000000e+000 result=40 12:41:31 Config A/D Result=40 12:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:31 Get A/D filter: -9.255963e+061 result=40 12:41:31 Get A/D value=-858993460 result=40 12:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:31 Parameters OK 12:41:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:31 Set A/D data flow result=40 12:41:31 Set A/D channel type result=40 12:41:31 Set A/D encoding result=40 12:41:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:31 Set channel filter=0.000000e+000 result=40 12:41:31 Config A/D Result=40 12:41:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:31 Get A/D filter: -9.255963e+061 result=40 12:41:31 Get A/D value=-858993460 result=40 12:41:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:31 Aux= 12:41:31 Message to Camera, serial 277273 queued 12:42:08 Received message from Master: op=PointingHead serial=277286 12:42:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:42:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:42:08 Point started: ret=0 12:42:08 point_skyscan result=0 12:42:09 Check angles 12:42:09 SkyScan query 12:42:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:42:09 Message to Master queued w/err=0: serial=277286 error=0 12:42:14 Received message from Master: op=Filter serial=277287 12:42:14 Color wheel filter change from 0 to 0 12:42:14 FLIGetFilterPos err=0 currentPosition=0 12:42:14 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:14 Filter is already there-color wheel unchanged 12:42:14 Received message from Master: op=Shutter serial=277288 12:42:14 Shutter LASER close 12:42:14 Received message from Camera: op=State serial=277290 12:42:14 GetSingleValue result=40 Value=cccccccc 12:42:14 SkyScan query 12:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:42:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:15 Parameters OK 12:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:15 Set A/D data flow result=40 12:42:15 Set A/D channel type result=40 12:42:15 Set A/D encoding result=40 12:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:15 Set channel filter=0.000000e+000 result=40 12:42:15 Config A/D Result=40 12:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:15 Get A/D filter: -9.255963e+061 result=40 12:42:15 Get A/D value=-858993460 result=40 12:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:15 Parameters OK 12:42:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:15 Set A/D data flow result=40 12:42:15 Set A/D channel type result=40 12:42:15 Set A/D encoding result=40 12:42:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:15 Set channel filter=0.000000e+000 result=40 12:42:15 Config A/D Result=40 12:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:15 Get A/D filter: -9.255963e+061 result=40 12:42:15 Get A/D value=-858993460 result=40 12:42:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:15 Aux= 12:42:15 Message to Camera, serial 277290 queued 12:42:52 Received message from Master: op=PointingHead serial=277303 12:42:52 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:42:52 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:42:52 Point started: ret=0 12:42:52 point_skyscan result=0 12:42:53 Check angles 12:42:53 SkyScan query 12:42:53 SkyScan query done: ret=0 az=136.335<-9089 ze=-6.51<-12434 Statuses=0009 0008 12:42:53 Msec=0 True Az=136.335 Ze=-6.51 Az status=0009 Ze status=0008 12:42:54 Check angles 12:42:54 SkyScan query 12:42:54 SkyScan query done: ret=0 az=154.155<-10277 ze=-6.495<-12433 Statuses=0009 0008 12:42:54 Msec=750 True Az=154.155 Ze=-6.495 Az status=0009 Ze status=0008 12:42:54 Check angles 12:42:54 SkyScan query 12:42:55 SkyScan query done: ret=0 az=171.6<-11440 ze=-6.495<-12433 Statuses=0009 0008 12:42:55 Msec=1500 True Az=171.6 Ze=-6.495 Az status=0009 Ze status=0008 12:42:55 Check angles 12:42:55 SkyScan query 12:42:56 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:42:56 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:42:56 Message to Master queued w/err=0: serial=277303 error=0 12:43:01 Received message from Master: op=Filter serial=277304 12:43:01 Color wheel filter change from 0 to 0 12:43:01 FLIGetFilterPos err=0 currentPosition=0 12:43:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:01 Filter is already there-color wheel unchanged 12:43:01 Received message from Master: op=Shutter serial=277305 12:43:01 Shutter LASER close 12:43:01 Received message from Camera: op=State serial=277307 12:43:01 GetSingleValue result=40 Value=cccccccc 12:43:01 SkyScan query 12:43:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:43:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:01 Parameters OK 12:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:01 Set A/D data flow result=40 12:43:01 Set A/D channel type result=40 12:43:01 Set A/D encoding result=40 12:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:01 Set channel filter=0.000000e+000 result=40 12:43:01 Config A/D Result=40 12:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:01 Get A/D filter: -9.255963e+061 result=40 12:43:01 Get A/D value=-858993460 result=40 12:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:01 Parameters OK 12:43:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:01 Set A/D data flow result=40 12:43:01 Set A/D channel type result=40 12:43:01 Set A/D encoding result=40 12:43:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:01 Set channel filter=0.000000e+000 result=40 12:43:01 Config A/D Result=40 12:43:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:01 Get A/D filter: -9.255963e+061 result=40 12:43:01 Get A/D value=-858993460 result=40 12:43:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:01 Aux= 12:43:01 Message to Camera, serial 277307 queued 12:43:38 Received message from Master: op=PointingHead serial=277320 12:43:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:43:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:43:39 Point started: ret=0 12:43:39 point_skyscan result=0 12:43:39 Check angles 12:43:39 SkyScan query 12:43:40 SkyScan query done: ret=0 az=152.895<-10193 ze=6.51<-11566 Statuses=0009 0008 12:43:40 Msec=0 True Az=152.895 Ze=6.51 Az status=0009 Ze status=0008 12:43:40 Check angles 12:43:40 SkyScan query 12:43:41 SkyScan query done: ret=0 az=135.105<-9007 ze=6.495<-11567 Statuses=0009 0008 12:43:41 Msec=750 True Az=135.105 Ze=6.495 Az status=0009 Ze status=0008 12:43:41 Check angles 12:43:41 SkyScan query 12:43:42 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 12:43:42 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 12:43:42 Check angles 12:43:42 SkyScan query 12:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:42 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:43:42 Message to Master queued w/err=0: serial=277320 error=0 12:43:47 Received message from Master: op=Filter serial=277321 12:43:47 Color wheel filter change from 0 to 0 12:43:47 FLIGetFilterPos err=0 currentPosition=0 12:43:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:47 Filter is already there-color wheel unchanged 12:43:48 Received message from Master: op=Shutter serial=277322 12:43:48 Shutter LASER close [UTC 2019-3-14 12:43:48] 12:43:48 Received message from Camera: op=State serial=277324 12:43:48 GetSingleValue result=40 Value=cccccccc 12:43:48 SkyScan query 12:43:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:48 Parameters OK 12:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:48 Set A/D data flow result=40 12:43:48 Set A/D channel type result=40 12:43:48 Set A/D encoding result=40 12:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:48 Set channel filter=0.000000e+000 result=40 12:43:48 Config A/D Result=40 12:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:48 Get A/D filter: -9.255963e+061 result=40 12:43:48 Get A/D value=-858993460 result=40 12:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:48 Parameters OK 12:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:48 Set A/D data flow result=40 12:43:48 Set A/D channel type result=40 12:43:48 Set A/D encoding result=40 12:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:48 Set channel filter=0.000000e+000 result=40 12:43:48 Config A/D Result=40 12:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:48 Get A/D filter: -9.255963e+061 result=40 12:43:48 Get A/D value=-858993460 result=40 12:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:48 Aux= 12:43:48 Message to Camera, serial 277324 queued 12:44:25 Received message from Master: op=PointingHead serial=277337 12:44:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:44:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:44:25 Point started: ret=0 12:44:25 point_skyscan result=0 12:44:26 Check angles 12:44:26 SkyScan query 12:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.505<-13567 Statuses=0008 0009 12:44:27 Msec=0 True Az=112.995 Ze=-23.505 Az status=0008 Ze status=0009 12:44:27 Check angles 12:44:27 SkyScan query 12:44:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.445<-14963 Statuses=0008 0009 12:44:27 Msec=750 True Az=112.995 Ze=-44.445 Az status=0008 Ze status=0009 12:44:28 Check angles 12:44:28 SkyScan query 12:44:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.4<-16360 Statuses=0008 0009 12:44:28 Msec=1500 True Az=112.995 Ze=-65.4 Az status=0008 Ze status=0009 12:44:28 Check angles 12:44:28 SkyScan query 12:44:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.355<-17757 Statuses=0008 0009 12:44:29 Msec=2250 True Az=112.995 Ze=-86.355 Az status=0008 Ze status=0009 12:44:29 Check angles 12:44:29 SkyScan query 12:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.31<-19154 Statuses=0008 0009 12:44:30 Msec=3000 True Az=112.995 Ze=-107.31 Az status=0008 Ze status=0009 12:44:30 Check angles 12:44:30 SkyScan query 12:44:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.25<-20550 Statuses=0008 0009 12:44:30 Msec=3750 True Az=112.995 Ze=-128.25 Az status=0008 Ze status=0009 12:44:31 Check angles 12:44:31 SkyScan query 12:44:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.25<-21950 Statuses=0008 0009 12:44:31 Msec=4500 True Az=112.995 Ze=-149.25 Az status=0008 Ze status=0009 12:44:31 Check angles 12:44:31 SkyScan query 12:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.19<-23346 Statuses=0008 0009 12:44:32 Msec=5250 True Az=112.995 Ze=-170.19 Az status=0008 Ze status=0009 12:44:32 Check angles 12:44:32 SkyScan query 12:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:44:33 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:44:33 Message to Master queued w/err=0: serial=277337 error=0 12:44:38 Received message from Master: op=Filter serial=277338 12:44:38 Color wheel filter change from 0 to 0 12:44:38 FLIGetFilterPos err=0 currentPosition=0 12:44:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:38 Filter is already there-color wheel unchanged 12:44:38 Received message from Master: op=Shutter serial=277339 12:44:38 Shutter LASER open 12:44:38 Received message from Camera: op=State serial=277341 12:44:38 GetSingleValue result=40 Value=cccccccc 12:44:38 SkyScan query 12:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:44:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:39 Parameters OK 12:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:39 Set A/D data flow result=40 12:44:39 Set A/D channel type result=40 12:44:39 Set A/D encoding result=40 12:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:39 Set channel filter=0.000000e+000 result=40 12:44:39 Config A/D Result=40 12:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:39 Get A/D filter: -9.255963e+061 result=40 12:44:39 Get A/D value=-858993460 result=40 12:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:39 Parameters OK 12:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:39 Set A/D data flow result=40 12:44:39 Set A/D channel type result=40 12:44:39 Set A/D encoding result=40 12:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:39 Set channel filter=0.000000e+000 result=40 12:44:39 Config A/D Result=40 12:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:39 Get A/D filter: -9.255963e+061 result=40 12:44:39 Get A/D value=-858993460 result=40 12:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:39 Aux= 12:44:39 Message to Camera, serial 277341 queued 12:44:46 Received message from Master: op=Shutter serial=277350 12:44:46 Shutter LASER close 12:44:47 Received message from Master: op=PointingHead serial=277354 12:44:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:44:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:44:47 Point started: ret=0 12:44:47 point_skyscan result=0 12:44:48 Check angles 12:44:48 SkyScan query 12:44:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.175<-21545 Statuses=0008 0009 12:44:48 Msec=0 True Az=112.995 Ze=-143.175 Az status=0008 Ze status=0009 12:44:48 Check angles 12:44:48 SkyScan query 12:44:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 12:44:49 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 12:44:49 Check angles 12:44:49 SkyScan query 12:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 12:44:50 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 12:44:50 Check angles 12:44:50 SkyScan query 12:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 12:44:50 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 12:44:51 Check angles 12:44:51 SkyScan query 12:44:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.905<-15927 Statuses=0008 0009 12:44:51 Msec=3000 True Az=112.995 Ze=-58.905 Az status=0008 Ze status=0009 12:44:51 Check angles 12:44:51 SkyScan query 12:44:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 12:44:52 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 12:44:52 Check angles 12:44:52 SkyScan query 12:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 12:44:53 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 12:44:53 Check angles 12:44:53 SkyScan query 12:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 12:44:53 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 12:44:54 Check angles 12:44:54 SkyScan query 12:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:44:54 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:44:54 Message to Master queued w/err=0: serial=277354 error=0 12:44:59 Received message from Master: op=Filter serial=277355 12:44:59 Color wheel filter change from 0 to 0 12:44:59 FLIGetFilterPos err=0 currentPosition=0 12:44:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:59 Filter is already there-color wheel unchanged 12:44:59 Received message from Master: op=Shutter serial=277356 12:44:59 Shutter LASER close 12:45:00 Received message from Camera: op=State serial=277358 12:45:00 GetSingleValue result=40 Value=cccccccc 12:45:00 SkyScan query 12:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:00 Parameters OK 12:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:00 Set A/D data flow result=40 12:45:00 Set A/D channel type result=40 12:45:00 Set A/D encoding result=40 12:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:00 Set channel filter=0.000000e+000 result=40 12:45:00 Config A/D Result=40 12:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:00 Get A/D filter: -9.255963e+061 result=40 12:45:00 Get A/D value=-858993460 result=40 12:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:00 Parameters OK 12:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:00 Set A/D data flow result=40 12:45:00 Set A/D channel type result=40 12:45:00 Set A/D encoding result=40 12:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:00 Set channel filter=0.000000e+000 result=40 12:45:00 Config A/D Result=40 12:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:00 Get A/D filter: -9.255963e+061 result=40 12:45:00 Get A/D value=-858993460 result=40 12:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:00 Aux= 12:45:00 Message to Camera, serial 277358 queued 12:45:37 Received message from Master: op=PointingHead serial=277371 12:45:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:45:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:45:37 Point started: ret=0 12:45:37 point_skyscan result=0 12:45:38 Check angles 12:45:38 SkyScan query 12:45:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:45:39 Message to Master queued w/err=0: serial=277371 error=0 12:45:44 Received message from Master: op=Filter serial=277372 12:45:44 Color wheel filter change from 0 to 0 12:45:44 FLIGetFilterPos err=0 currentPosition=0 12:45:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:44 Filter is already there-color wheel unchanged 12:45:44 Received message from Master: op=Shutter serial=277373 12:45:44 Shutter LASER close 12:45:44 Received message from Camera: op=State serial=277375 12:45:44 GetSingleValue result=40 Value=cccccccc 12:45:44 SkyScan query 12:45:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:45:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:44 Parameters OK 12:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:44 Set A/D data flow result=40 12:45:44 Set A/D channel type result=40 12:45:44 Set A/D encoding result=40 12:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:44 Set channel filter=0.000000e+000 result=40 12:45:44 Config A/D Result=40 12:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:44 Get A/D filter: -9.255963e+061 result=40 12:45:44 Get A/D value=-858993460 result=40 12:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:44 Parameters OK 12:45:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:44 Set A/D data flow result=40 12:45:44 Set A/D channel type result=40 12:45:44 Set A/D encoding result=40 12:45:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:44 Set channel filter=0.000000e+000 result=40 12:45:44 Config A/D Result=40 12:45:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:44 Get A/D filter: -9.255963e+061 result=40 12:45:44 Get A/D value=-858993460 result=40 12:45:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:44 Aux= 12:45:44 Message to Camera, serial 277375 queued 12:46:21 Received message from Master: op=PointingHead serial=277388 12:46:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:46:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:46:22 Point started: ret=0 12:46:22 point_skyscan result=0 12:46:22 Check angles 12:46:22 SkyScan query 12:46:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:46:23 Message to Master queued w/err=0: serial=277388 error=0 12:46:28 Received message from Master: op=Filter serial=277389 12:46:28 Color wheel filter change from 0 to 0 12:46:28 FLIGetFilterPos err=0 currentPosition=0 12:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:28 Filter is already there-color wheel unchanged 12:46:28 Received message from Master: op=Shutter serial=277390 12:46:28 Shutter LASER close 12:46:28 Received message from Camera: op=State serial=277392 12:46:28 GetSingleValue result=40 Value=cccccccc 12:46:28 SkyScan query 12:46:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:46:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:29 Parameters OK 12:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:29 Set A/D data flow result=40 12:46:29 Set A/D channel type result=40 12:46:29 Set A/D encoding result=40 12:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:29 Set channel filter=0.000000e+000 result=40 12:46:29 Config A/D Result=40 12:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:29 Get A/D filter: -9.255963e+061 result=40 12:46:29 Get A/D value=-858993460 result=40 12:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:29 Parameters OK 12:46:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:29 Set A/D data flow result=40 12:46:29 Set A/D channel type result=40 12:46:29 Set A/D encoding result=40 12:46:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:29 Set channel filter=0.000000e+000 result=40 12:46:29 Config A/D Result=40 12:46:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:29 Get A/D filter: -9.255963e+061 result=40 12:46:29 Get A/D value=-858993460 result=40 12:46:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:29 Aux= 12:46:29 Message to Camera, serial 277392 queued 12:47:06 Received message from Master: op=PointingHead serial=277405 12:47:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:47:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:47:06 Point started: ret=0 12:47:06 point_skyscan result=0 12:47:07 Check angles 12:47:07 SkyScan query 12:47:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:47:07 Message to Master queued w/err=0: serial=277405 error=0 12:47:12 Received message from Master: op=Filter serial=277406 12:47:12 Color wheel filter change from 0 to 0 12:47:12 FLIGetFilterPos err=0 currentPosition=0 12:47:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:12 Filter is already there-color wheel unchanged 12:47:12 Received message from Master: op=Shutter serial=277407 12:47:12 Shutter LASER close 12:47:12 Received message from Camera: op=State serial=277409 12:47:12 GetSingleValue result=40 Value=cccccccc 12:47:12 SkyScan query 12:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:47:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:13 Parameters OK 12:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:13 Set A/D data flow result=40 12:47:13 Set A/D channel type result=40 12:47:13 Set A/D encoding result=40 12:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:13 Set channel filter=0.000000e+000 result=40 12:47:13 Config A/D Result=40 12:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:13 Get A/D filter: -9.255963e+061 result=40 12:47:13 Get A/D value=-858993460 result=40 12:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:13 Parameters OK 12:47:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:13 Set A/D data flow result=40 12:47:13 Set A/D channel type result=40 12:47:13 Set A/D encoding result=40 12:47:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:13 Set channel filter=0.000000e+000 result=40 12:47:13 Config A/D Result=40 12:47:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:13 Get A/D filter: -9.255963e+061 result=40 12:47:13 Get A/D value=-858993460 result=40 12:47:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:13 Aux= 12:47:13 Message to Camera, serial 277409 queued 12:47:50 Received message from Master: op=PointingHead serial=277422 12:47:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:47:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:47:50 Point started: ret=0 12:47:50 point_skyscan result=0 12:47:51 Check angles 12:47:51 SkyScan query 12:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 12:47:52 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 12:47:52 Check angles 12:47:52 SkyScan query 12:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.535<-14969 Statuses=0008 0009 12:47:52 Msec=750 True Az=112.995 Ze=-44.535 Az status=0008 Ze status=0009 12:47:52 Check angles 12:47:52 SkyScan query 12:47:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.925<-16395 Statuses=0008 0009 12:47:53 Msec=1500 True Az=112.995 Ze=-65.925 Az status=0008 Ze status=0009 12:47:53 Check angles 12:47:53 SkyScan query 12:47:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.895<-17793 Statuses=0008 0009 12:47:54 Msec=2250 True Az=112.995 Ze=-86.895 Az status=0008 Ze status=0009 12:47:54 Check angles 12:47:54 SkyScan query 12:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.315<-19221 Statuses=0008 0009 12:47:55 Msec=3000 True Az=112.995 Ze=-108.315 Az status=0008 Ze status=0009 12:47:55 Check angles 12:47:55 SkyScan query 12:47:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.66<-20644 Statuses=0008 0009 12:47:55 Msec=3750 True Az=112.995 Ze=-129.66 Az status=0008 Ze status=0009 12:47:56 Check angles 12:47:56 SkyScan query 12:47:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.02<-22068 Statuses=0008 0009 12:47:56 Msec=4500 True Az=112.995 Ze=-151.02 Az status=0008 Ze status=0009 12:47:56 Check angles 12:47:56 SkyScan query 12:47:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.63<-23442 Statuses=0008 0009 12:47:57 Msec=5250 True Az=112.995 Ze=-171.63 Az status=0008 Ze status=0009 12:47:57 Check angles 12:47:57 SkyScan query 12:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:47:58 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:47:58 Message to Master queued w/err=0: serial=277422 error=0 12:48:03 Received message from Master: op=Filter serial=277423 12:48:03 Color wheel filter change from 0 to 0 12:48:03 FLIGetFilterPos err=0 currentPosition=0 12:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:03 Filter is already there-color wheel unchanged 12:48:03 Received message from Master: op=Shutter serial=277424 12:48:03 Shutter LASER open 12:48:03 Received message from Camera: op=State serial=277426 12:48:03 GetSingleValue result=40 Value=cccccccc 12:48:03 SkyScan query 12:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:04 Parameters OK 12:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:04 Set A/D data flow result=40 12:48:04 Set A/D channel type result=40 12:48:04 Set A/D encoding result=40 12:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:04 Set channel filter=0.000000e+000 result=40 12:48:04 Config A/D Result=40 12:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:04 Get A/D filter: -9.255963e+061 result=40 12:48:04 Get A/D value=-858993460 result=40 12:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:04 Parameters OK 12:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:04 Set A/D data flow result=40 12:48:04 Set A/D channel type result=40 12:48:04 Set A/D encoding result=40 12:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:04 Set channel filter=0.000000e+000 result=40 12:48:04 Config A/D Result=40 12:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:04 Get A/D filter: -9.255963e+061 result=40 12:48:04 Get A/D value=-858993460 result=40 12:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:04 Aux= 12:48:04 Message to Camera, serial 277426 queued 12:48:12 Received message from Master: op=Shutter serial=277436 12:48:12 Shutter LASER close 12:48:13 Received message from Master: op=PointingHead serial=277440 12:48:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:48:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:48:13 Point started: ret=0 12:48:13 point_skyscan result=0 12:48:14 Check angles 12:48:14 SkyScan query 12:48:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 12:48:14 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 12:48:14 Check angles 12:48:14 SkyScan query 12:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 12:48:15 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 12:48:15 Check angles 12:48:15 SkyScan query 12:48:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 12:48:16 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 12:48:16 Check angles 12:48:16 SkyScan query 12:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 12:48:17 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 12:48:17 Check angles 12:48:17 SkyScan query 12:48:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-57.975<-15865 Statuses=0008 0009 12:48:17 Msec=3000 True Az=112.995 Ze=-57.975 Az status=0008 Ze status=0009 12:48:18 Check angles 12:48:18 SkyScan query 12:48:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.065<-14471 Statuses=0008 0009 12:48:18 Msec=3750 True Az=112.995 Ze=-37.065 Az status=0008 Ze status=0009 12:48:18 Check angles 12:48:18 SkyScan query 12:48:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 12:48:19 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 12:48:19 Check angles 12:48:19 SkyScan query 12:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 12:48:20 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 12:48:20 Check angles 12:48:20 SkyScan query 12:48:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:48:20 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:48:20 Message to Master queued w/err=0: serial=277440 error=0 12:48:25 Received message from Master: op=Filter serial=277441 12:48:25 Color wheel filter change from 0 to 0 12:48:25 FLIGetFilterPos err=0 currentPosition=0 12:48:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:25 Filter is already there-color wheel unchanged 12:48:26 Received message from Master: op=Shutter serial=277442 12:48:26 Shutter LASER close 12:48:26 Received message from Camera: op=State serial=277444 12:48:26 GetSingleValue result=40 Value=cccccccc 12:48:26 SkyScan query 12:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:48:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:26 Parameters OK 12:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:26 Set A/D data flow result=40 12:48:26 Set A/D channel type result=40 12:48:26 Set A/D encoding result=40 12:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:26 Set channel filter=0.000000e+000 result=40 12:48:26 Config A/D Result=40 12:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:26 Get A/D filter: -9.255963e+061 result=40 12:48:26 Get A/D value=-858993460 result=40 12:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:26 Parameters OK 12:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:26 Set A/D data flow result=40 12:48:26 Set A/D channel type result=40 12:48:26 Set A/D encoding result=40 12:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:26 Set channel filter=0.000000e+000 result=40 12:48:26 Config A/D Result=40 12:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:26 Get A/D filter: -9.255963e+061 result=40 12:48:26 Get A/D value=-858993460 result=40 12:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:26 Aux= 12:48:26 Message to Camera, serial 277444 queued 12:49:03 Received message from Master: op=PointingHead serial=277457 12:49:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:49:03 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:49:04 Point started: ret=0 12:49:04 point_skyscan result=0 12:49:04 Check angles 12:49:04 SkyScan query 12:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:49:05 Message to Master queued w/err=0: serial=277457 error=0 12:49:10 Received message from Master: op=Filter serial=277458 12:49:10 Color wheel filter change from 0 to 0 12:49:10 FLIGetFilterPos err=0 currentPosition=0 12:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:10 Filter is already there-color wheel unchanged 12:49:10 Received message from Master: op=Shutter serial=277459 12:49:10 Shutter LASER close 12:49:10 Received message from Camera: op=State serial=277461 12:49:10 GetSingleValue result=40 Value=cccccccc 12:49:10 SkyScan query 12:49:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:11 Parameters OK 12:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:11 Set A/D data flow result=40 12:49:11 Set A/D channel type result=40 12:49:11 Set A/D encoding result=40 12:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:11 Set channel filter=0.000000e+000 result=40 12:49:11 Config A/D Result=40 12:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:11 Get A/D filter: -9.255963e+061 result=40 12:49:11 Get A/D value=-858993460 result=40 12:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:11 Parameters OK 12:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:11 Set A/D data flow result=40 12:49:11 Set A/D channel type result=40 12:49:11 Set A/D encoding result=40 12:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:11 Set channel filter=0.000000e+000 result=40 12:49:11 Config A/D Result=40 12:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:11 Get A/D filter: -9.255963e+061 result=40 12:49:11 Get A/D value=-858993460 result=40 12:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:11 Aux= 12:49:11 Message to Camera, serial 277461 queued 12:49:47 Received message from Master: op=PointingHead serial=277474 12:49:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:49:47 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:49:48 Point started: ret=0 12:49:48 point_skyscan result=0 12:49:49 Check angles 12:49:49 SkyScan query 12:49:49 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:49:49 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:49:49 Check angles 12:49:49 SkyScan query 12:49:50 SkyScan query done: ret=0 az=153.48<-10232 ze=-6.495<-12433 Statuses=0009 0008 12:49:50 Msec=750 True Az=153.48 Ze=-6.495 Az status=0009 Ze status=0008 12:49:50 Check angles 12:49:50 SkyScan query 12:49:51 SkyScan query done: ret=0 az=170.97<-11398 ze=-6.495<-12433 Statuses=0009 0008 12:49:51 Msec=1500 True Az=170.97 Ze=-6.495 Az status=0009 Ze status=0008 12:49:51 Check angles 12:49:51 SkyScan query 12:49:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 12:49:51 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 12:49:51 Message to Master queued w/err=0: serial=277474 error=0 12:49:56 Received message from Master: op=Filter serial=277475 12:49:56 Color wheel filter change from 0 to 0 12:49:56 FLIGetFilterPos err=0 currentPosition=0 12:49:56 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:56 Filter is already there-color wheel unchanged 12:49:57 Received message from Master: op=Shutter serial=277476 12:49:57 Shutter LASER close 12:49:57 Received message from Camera: op=State serial=277478 12:49:57 GetSingleValue result=40 Value=cccccccc 12:49:57 SkyScan query 12:49:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:49:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:57 Parameters OK 12:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:57 Set A/D data flow result=40 12:49:57 Set A/D channel type result=40 12:49:57 Set A/D encoding result=40 12:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:57 Set channel filter=0.000000e+000 result=40 12:49:57 Config A/D Result=40 12:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:57 Get A/D filter: -9.255963e+061 result=40 12:49:57 Get A/D value=-858993460 result=40 12:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:57 Parameters OK 12:49:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:57 Set A/D data flow result=40 12:49:57 Set A/D channel type result=40 12:49:57 Set A/D encoding result=40 12:49:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:57 Set channel filter=0.000000e+000 result=40 12:49:57 Config A/D Result=40 12:49:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:57 Get A/D filter: -9.255963e+061 result=40 12:49:57 Get A/D value=-858993460 result=40 12:49:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:57 Aux= 12:49:57 Message to Camera, serial 277478 queued 12:50:33 Received message from Master: op=PointingHead serial=277490 12:50:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:50:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:50:33 Point started: ret=0 12:50:33 point_skyscan result=0 12:50:34 Check angles 12:50:34 SkyScan query 12:50:35 SkyScan query done: ret=0 az=152.625<-10175 ze=6.51<-11566 Statuses=0009 0008 12:50:35 Msec=0 True Az=152.625 Ze=6.51 Az status=0009 Ze status=0008 12:50:35 Check angles 12:50:35 SkyScan query 12:50:35 SkyScan query done: ret=0 az=134.79<-8986 ze=6.495<-11567 Statuses=0009 0008 12:50:35 Msec=750 True Az=134.79 Ze=6.495 Az status=0009 Ze status=0008 12:50:36 Check angles 12:50:36 SkyScan query 12:50:36 SkyScan query done: ret=0 az=117.405<-7827 ze=6.495<-11567 Statuses=0009 0008 12:50:36 Msec=1500 True Az=117.405 Ze=6.495 Az status=0009 Ze status=0008 12:50:36 Check angles 12:50:36 SkyScan query 12:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:37 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:50:37 Message to Master queued w/err=0: serial=277490 error=0 12:50:42 Received message from Master: op=Filter serial=277491 12:50:42 Color wheel filter change from 0 to 0 12:50:42 FLIGetFilterPos err=0 currentPosition=0 12:50:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:42 Filter is already there-color wheel unchanged 12:50:42 Received message from Master: op=Shutter serial=277492 12:50:42 Shutter LASER close 12:50:42 Received message from Camera: op=State serial=277494 12:50:42 GetSingleValue result=40 Value=cccccccc 12:50:42 SkyScan query 12:50:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:43 Parameters OK 12:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:43 Set A/D data flow result=40 12:50:43 Set A/D channel type result=40 12:50:43 Set A/D encoding result=40 12:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:43 Set channel filter=0.000000e+000 result=40 12:50:43 Config A/D Result=40 12:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:43 Get A/D filter: -9.255963e+061 result=40 12:50:43 Get A/D value=-858993460 result=40 12:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:43 Parameters OK 12:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:43 Set A/D data flow result=40 12:50:43 Set A/D channel type result=40 12:50:43 Set A/D encoding result=40 12:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:43 Set channel filter=0.000000e+000 result=40 12:50:43 Config A/D Result=40 12:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:43 Get A/D filter: -9.255963e+061 result=40 12:50:43 Get A/D value=-858993460 result=40 12:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:43 Aux= 12:50:43 Message to Camera, serial 277494 queued 12:51:20 Received message from Master: op=PointingHead serial=277507 12:51:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:51:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:51:20 Point started: ret=0 12:51:20 point_skyscan result=0 12:51:21 Check angles 12:51:21 SkyScan query 12:51:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 12:51:21 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 12:51:21 Check angles 12:51:21 SkyScan query 12:51:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 12:51:22 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 12:51:22 Check angles 12:51:22 SkyScan query 12:51:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.7<-16380 Statuses=0008 0009 12:51:23 Msec=1500 True Az=112.995 Ze=-65.7 Az status=0008 Ze status=0009 12:51:23 Check angles 12:51:23 SkyScan query 12:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 12:51:24 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 12:51:24 Check angles 12:51:24 SkyScan query 12:51:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.655<-19177 Statuses=0008 0009 12:51:24 Msec=3000 True Az=112.995 Ze=-107.655 Az status=0008 Ze status=0009 12:51:24 Check angles 12:51:24 SkyScan query 12:51:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 12:51:25 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 12:51:25 Check angles 12:51:25 SkyScan query 12:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 12:51:26 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 12:51:26 Check angles 12:51:26 SkyScan query 12:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.18<-23412 Statuses=0008 0009 12:51:27 Msec=5250 True Az=112.995 Ze=-171.18 Az status=0008 Ze status=0009 12:51:27 Check angles 12:51:27 SkyScan query 12:51:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:51:27 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:51:27 Message to Master queued w/err=0: serial=277507 error=0 12:51:32 Received message from Master: op=Filter serial=277508 12:51:32 Color wheel filter change from 0 to 0 12:51:32 FLIGetFilterPos err=0 currentPosition=0 12:51:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:32 Filter is already there-color wheel unchanged 12:51:33 Received message from Master: op=Shutter serial=277509 12:51:33 Shutter LASER open 12:51:33 Received message from Camera: op=State serial=277511 12:51:33 GetSingleValue result=40 Value=cccccccc 12:51:33 SkyScan query 12:51:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:51:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:33 Parameters OK 12:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:33 Set A/D data flow result=40 12:51:33 Set A/D channel type result=40 12:51:33 Set A/D encoding result=40 12:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:33 Set channel filter=0.000000e+000 result=40 12:51:33 Config A/D Result=40 12:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:33 Get A/D filter: -9.255963e+061 result=40 12:51:33 Get A/D value=-858993460 result=40 12:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:33 Parameters OK 12:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:33 Set A/D data flow result=40 12:51:33 Set A/D channel type result=40 12:51:33 Set A/D encoding result=40 12:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:33 Set channel filter=0.000000e+000 result=40 12:51:33 Config A/D Result=40 12:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:33 Get A/D filter: -9.255963e+061 result=40 12:51:33 Get A/D value=-858993460 result=40 12:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:33 Aux= 12:51:33 Message to Camera, serial 277511 queued 12:51:42 Received message from Master: op=Shutter serial=277521 12:51:42 Shutter LASER close 12:51:42 Received message from Master: op=PointingHead serial=277525 12:51:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:51:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:51:42 Point started: ret=0 12:51:42 point_skyscan result=0 12:51:43 Check angles 12:51:43 SkyScan query 12:51:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.415<-21561 Statuses=0008 0009 12:51:44 Msec=0 True Az=112.995 Ze=-143.415 Az status=0008 Ze status=0009 12:51:44 Check angles 12:51:44 SkyScan query 12:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.505<-20167 Statuses=0008 0009 12:51:45 Msec=750 True Az=112.995 Ze=-122.505 Az status=0008 Ze status=0009 12:51:45 Check angles 12:51:45 SkyScan query 12:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.535<-18769 Statuses=0008 0009 12:51:45 Msec=1500 True Az=112.995 Ze=-101.535 Az status=0008 Ze status=0009 12:51:46 Check angles 12:51:46 SkyScan query 12:51:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.13<-17342 Statuses=0008 0009 12:51:46 Msec=2250 True Az=112.995 Ze=-80.13 Az status=0008 Ze status=0009 12:51:46 Check angles 12:51:46 SkyScan query 12:51:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 12:51:47 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 12:51:47 Check angles 12:51:47 SkyScan query 12:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.175<-14545 Statuses=0008 0009 12:51:48 Msec=3750 True Az=112.995 Ze=-38.175 Az status=0008 Ze status=0009 12:51:48 Check angles 12:51:48 SkyScan query 12:51:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.785<-13119 Statuses=0008 0009 12:51:48 Msec=4500 True Az=112.995 Ze=-16.785 Az status=0008 Ze status=0009 12:51:49 Check angles 12:51:49 SkyScan query 12:51:49 SkyScan query done: ret=0 az=112.995<-7533 ze=4.14<-11724 Statuses=0008 0009 12:51:49 Msec=5250 True Az=112.995 Ze=4.14 Az status=0008 Ze status=0009 12:51:49 Check angles 12:51:49 SkyScan query 12:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:51:50 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:51:50 Message to Master queued w/err=0: serial=277525 error=0 12:51:55 Received message from Master: op=Filter serial=277526 12:51:55 Color wheel filter change from 0 to 0 12:51:55 FLIGetFilterPos err=0 currentPosition=0 12:51:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:55 Filter is already there-color wheel unchanged 12:51:55 Received message from Master: op=Shutter serial=277527 12:51:55 Shutter LASER close 12:51:55 Received message from Camera: op=State serial=277529 12:51:55 GetSingleValue result=40 Value=cccccccc 12:51:55 SkyScan query 12:51:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:51:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:56 Parameters OK 12:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:56 Set A/D data flow result=40 12:51:56 Set A/D channel type result=40 12:51:56 Set A/D encoding result=40 12:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:56 Set channel filter=0.000000e+000 result=40 12:51:56 Config A/D Result=40 12:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:56 Get A/D filter: -9.255963e+061 result=40 12:51:56 Get A/D value=-858993460 result=40 12:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:56 Parameters OK 12:51:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:56 Set A/D data flow result=40 12:51:56 Set A/D channel type result=40 12:51:56 Set A/D encoding result=40 12:51:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:56 Set channel filter=0.000000e+000 result=40 12:51:56 Config A/D Result=40 12:51:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:56 Get A/D filter: -9.255963e+061 result=40 12:51:56 Get A/D value=-858993460 result=40 12:51:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:56 Aux= 12:51:56 Message to Camera, serial 277529 queued 12:52:33 Received message from Master: op=PointingHead serial=277542 12:52:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:52:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:52:33 Point started: ret=0 12:52:33 point_skyscan result=0 12:52:34 Check angles 12:52:34 SkyScan query 12:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:52:34 Message to Master queued w/err=0: serial=277542 error=0 12:52:39 Received message from Master: op=Filter serial=277543 12:52:39 Color wheel filter change from 0 to 0 12:52:39 FLIGetFilterPos err=0 currentPosition=0 12:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:39 Filter is already there-color wheel unchanged 12:52:39 Received message from Master: op=Shutter serial=277544 12:52:39 Shutter LASER close 12:52:39 Received message from Camera: op=State serial=277546 12:52:39 GetSingleValue result=40 Value=cccccccc 12:52:39 SkyScan query 12:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:40 Parameters OK 12:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:40 Set A/D data flow result=40 12:52:40 Set A/D channel type result=40 12:52:40 Set A/D encoding result=40 12:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:40 Set channel filter=0.000000e+000 result=40 12:52:40 Config A/D Result=40 12:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:40 Get A/D filter: -9.255963e+061 result=40 12:52:40 Get A/D value=-858993460 result=40 12:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:40 Parameters OK 12:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:40 Set A/D data flow result=40 12:52:40 Set A/D channel type result=40 12:52:40 Set A/D encoding result=40 12:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:40 Set channel filter=0.000000e+000 result=40 12:52:40 Config A/D Result=40 12:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:40 Get A/D filter: -9.255963e+061 result=40 12:52:40 Get A/D value=-858993460 result=40 12:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:40 Aux= 12:52:40 Message to Camera, serial 277546 queued 12:53:17 Received message from Master: op=PointingHead serial=277559 12:53:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:53:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:53:17 Point started: ret=0 12:53:17 point_skyscan result=0 12:53:18 Check angles 12:53:18 SkyScan query 12:53:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:19 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:53:19 Message to Master queued w/err=0: serial=277559 error=0 12:53:24 Received message from Master: op=Filter serial=277560 12:53:24 Color wheel filter change from 0 to 0 12:53:24 FLIGetFilterPos err=0 currentPosition=0 12:53:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:24 Filter is already there-color wheel unchanged 12:53:24 Received message from Master: op=Shutter serial=277561 12:53:24 Shutter LASER close 12:53:24 Received message from Camera: op=State serial=277563 12:53:24 GetSingleValue result=40 Value=cccccccc 12:53:24 SkyScan query 12:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:53:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:24 Parameters OK 12:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:24 Set A/D data flow result=40 12:53:24 Set A/D channel type result=40 12:53:24 Set A/D encoding result=40 12:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:24 Set channel filter=0.000000e+000 result=40 12:53:24 Config A/D Result=40 12:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:24 Get A/D filter: -9.255963e+061 result=40 12:53:24 Get A/D value=-858993460 result=40 12:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:24 Parameters OK 12:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:24 Set A/D data flow result=40 12:53:24 Set A/D channel type result=40 12:53:24 Set A/D encoding result=40 12:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:24 Set channel filter=0.000000e+000 result=40 12:53:24 Config A/D Result=40 12:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:24 Get A/D filter: -9.255963e+061 result=40 12:53:24 Get A/D value=-858993460 result=40 12:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:24 Aux= 12:53:24 Message to Camera, serial 277563 queued 12:54:01 Received message from Master: op=PointingHead serial=277576 12:54:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:54:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:54:02 Point started: ret=0 12:54:02 point_skyscan result=0 12:54:02 Check angles 12:54:02 SkyScan query 12:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:54:03 Message to Master queued w/err=0: serial=277576 error=0 12:54:08 Received message from Master: op=Filter serial=277577 12:54:08 Color wheel filter change from 0 to 0 12:54:08 FLIGetFilterPos err=0 currentPosition=0 12:54:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:08 Filter is already there-color wheel unchanged 12:54:08 Received message from Master: op=Shutter serial=277578 12:54:08 Shutter LASER close 12:54:08 Received message from Camera: op=State serial=277580 12:54:08 GetSingleValue result=40 Value=cccccccc 12:54:08 SkyScan query 12:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:54:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:09 Parameters OK 12:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:09 Set A/D data flow result=40 12:54:09 Set A/D channel type result=40 12:54:09 Set A/D encoding result=40 12:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:09 Set channel filter=0.000000e+000 result=40 [UTC 2019-3-14 12:54:09] 12:54:09 Config A/D Result=40 12:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:09 Get A/D filter: -9.255963e+061 result=40 12:54:09 Get A/D value=-858993460 result=40 12:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:09 Parameters OK 12:54:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:09 Set A/D data flow result=40 12:54:09 Set A/D channel type result=40 12:54:09 Set A/D encoding result=40 12:54:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:09 Set channel filter=0.000000e+000 result=40 12:54:09 Config A/D Result=40 12:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:09 Get A/D filter: -9.255963e+061 result=40 12:54:09 Get A/D value=-858993460 result=40 12:54:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:09 Aux= 12:54:09 Message to Camera, serial 277580 queued 12:54:46 Received message from Master: op=PointingHead serial=277593 12:54:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:54:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:54:46 Point started: ret=0 12:54:46 point_skyscan result=0 12:54:47 Check angles 12:54:47 SkyScan query 12:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 12:54:47 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 12:54:47 Check angles 12:54:47 SkyScan query 12:54:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.1<-14940 Statuses=0008 0009 12:54:48 Msec=750 True Az=112.995 Ze=-44.1 Az status=0008 Ze status=0009 12:54:48 Check angles 12:54:48 SkyScan query 12:54:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.025<-16335 Statuses=0008 0009 12:54:49 Msec=1500 True Az=112.995 Ze=-65.025 Az status=0008 Ze status=0009 12:54:49 Check angles 12:54:49 SkyScan query 12:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.98<-17732 Statuses=0008 0009 12:54:50 Msec=2250 True Az=112.995 Ze=-85.98 Az status=0008 Ze status=0009 12:54:50 Check angles 12:54:50 SkyScan query 12:54:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.89<-19126 Statuses=0008 0009 12:54:50 Msec=3000 True Az=112.995 Ze=-106.89 Az status=0008 Ze status=0009 12:54:50 Check angles 12:54:50 SkyScan query 12:54:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 12:54:51 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 12:54:51 Check angles 12:54:51 SkyScan query 12:54:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.8<-21920 Statuses=0008 0009 12:54:52 Msec=4500 True Az=112.995 Ze=-148.8 Az status=0008 Ze status=0009 12:54:52 Check angles 12:54:52 SkyScan query 12:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.755<-23317 Statuses=0008 0009 12:54:53 Msec=5250 True Az=112.995 Ze=-169.755 Az status=0008 Ze status=0009 12:54:53 Check angles 12:54:53 SkyScan query 12:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:54:53 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:54:53 Message to Master queued w/err=0: serial=277593 error=0 12:54:58 Received message from Master: op=Filter serial=277594 12:54:58 Color wheel filter change from 0 to 0 12:54:58 FLIGetFilterPos err=0 currentPosition=0 12:54:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:58 Filter is already there-color wheel unchanged 12:54:58 Received message from Master: op=Shutter serial=277595 12:54:58 Shutter LASER open 12:54:59 Received message from Camera: op=State serial=277597 12:54:59 GetSingleValue result=40 Value=cccccccc 12:54:59 SkyScan query 12:54:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:54:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:59 Parameters OK 12:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:59 Set A/D data flow result=40 12:54:59 Set A/D channel type result=40 12:54:59 Set A/D encoding result=40 12:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:59 Set channel filter=0.000000e+000 result=40 12:54:59 Config A/D Result=40 12:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:59 Get A/D filter: -9.255963e+061 result=40 12:54:59 Get A/D value=-858993460 result=40 12:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:59 Parameters OK 12:54:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:59 Set A/D data flow result=40 12:54:59 Set A/D channel type result=40 12:54:59 Set A/D encoding result=40 12:54:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:59 Set channel filter=0.000000e+000 result=40 12:54:59 Config A/D Result=40 12:54:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:59 Get A/D filter: -9.255963e+061 result=40 12:54:59 Get A/D value=-858993460 result=40 12:54:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:59 Aux= 12:54:59 Message to Camera, serial 277597 queued 12:55:08 Received message from Master: op=Shutter serial=277607 12:55:08 Shutter LASER close 12:55:08 Received message from Master: op=PointingHead serial=277611 12:55:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:08 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:09 Point started: ret=0 12:55:09 point_skyscan result=0 12:55:09 Check angles 12:55:09 SkyScan query 12:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.025<-21535 Statuses=0008 0009 12:55:10 Msec=0 True Az=112.995 Ze=-143.025 Az status=0008 Ze status=0009 12:55:10 Check angles 12:55:10 SkyScan query 12:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.055<-20137 Statuses=0008 0009 12:55:11 Msec=750 True Az=112.995 Ze=-122.055 Az status=0008 Ze status=0009 12:55:11 Check angles 12:55:11 SkyScan query 12:55:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 12:55:11 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 12:55:12 Check angles 12:55:12 SkyScan query 12:55:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.695<-17313 Statuses=0008 0009 12:55:12 Msec=2250 True Az=112.995 Ze=-79.695 Az status=0008 Ze status=0009 12:55:12 Check angles 12:55:12 SkyScan query 12:55:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.74<-15916 Statuses=0008 0009 12:55:13 Msec=3000 True Az=112.995 Ze=-58.74 Az status=0008 Ze status=0009 12:55:13 Check angles 12:55:13 SkyScan query 12:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.755<-14517 Statuses=0008 0009 12:55:14 Msec=3750 True Az=112.995 Ze=-37.755 Az status=0008 Ze status=0009 12:55:14 Check angles 12:55:14 SkyScan query 12:55:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.815<-13121 Statuses=0008 0009 12:55:14 Msec=4500 True Az=112.995 Ze=-16.815 Az status=0008 Ze status=0009 12:55:15 Check angles 12:55:15 SkyScan query 12:55:15 SkyScan query done: ret=0 az=112.995<-7533 ze=4.11<-11726 Statuses=0008 0009 12:55:15 Msec=5250 True Az=112.995 Ze=4.11 Az status=0008 Ze status=0009 12:55:15 Check angles 12:55:15 SkyScan query 12:55:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:55:16 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:55:16 Message to Master queued w/err=0: serial=277611 error=0 12:55:21 Received message from Master: op=Filter serial=277612 12:55:21 Color wheel filter change from 0 to 0 12:55:21 FLIGetFilterPos err=0 currentPosition=0 12:55:21 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:21 Filter is already there-color wheel unchanged 12:55:21 Received message from Master: op=Shutter serial=277613 12:55:21 Shutter LASER close 12:55:21 Received message from Camera: op=State serial=277615 12:55:21 GetSingleValue result=40 Value=cccccccc 12:55:21 SkyScan query 12:55:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:55:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:22 Parameters OK 12:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:22 Set A/D data flow result=40 12:55:22 Set A/D channel type result=40 12:55:22 Set A/D encoding result=40 12:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:22 Set channel filter=0.000000e+000 result=40 12:55:22 Config A/D Result=40 12:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:22 Get A/D filter: -9.255963e+061 result=40 12:55:22 Get A/D value=-858993460 result=40 12:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:22 Parameters OK 12:55:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:22 Set A/D data flow result=40 12:55:22 Set A/D channel type result=40 12:55:22 Set A/D encoding result=40 12:55:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:22 Set channel filter=0.000000e+000 result=40 12:55:22 Config A/D Result=40 12:55:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:22 Get A/D filter: -9.255963e+061 result=40 12:55:22 Get A/D value=-858993460 result=40 12:55:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:22 Aux= 12:55:22 Message to Camera, serial 277615 queued 12:55:59 Received message from Master: op=PointingHead serial=277628 12:55:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:55:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:55:59 Point started: ret=0 12:55:59 point_skyscan result=0 12:56:00 Check angles 12:56:00 SkyScan query 12:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:00 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:56:00 Message to Master queued w/err=0: serial=277628 error=0 12:56:05 Received message from Master: op=Filter serial=277629 12:56:05 Color wheel filter change from 0 to 0 12:56:05 FLIGetFilterPos err=0 currentPosition=0 12:56:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:05 Filter is already there-color wheel unchanged 12:56:06 Received message from Master: op=Shutter serial=277630 12:56:06 Shutter LASER close 12:56:06 Received message from Camera: op=State serial=277632 12:56:06 GetSingleValue result=40 Value=cccccccc 12:56:06 SkyScan query 12:56:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:06 Parameters OK 12:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:06 Set A/D data flow result=40 12:56:06 Set A/D channel type result=40 12:56:06 Set A/D encoding result=40 12:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:06 Set channel filter=0.000000e+000 result=40 12:56:06 Config A/D Result=40 12:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:06 Get A/D filter: -9.255963e+061 result=40 12:56:06 Get A/D value=-858993460 result=40 12:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:06 Parameters OK 12:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:06 Set A/D data flow result=40 12:56:06 Set A/D channel type result=40 12:56:06 Set A/D encoding result=40 12:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:06 Set channel filter=0.000000e+000 result=40 12:56:06 Config A/D Result=40 12:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:06 Get A/D filter: -9.255963e+061 result=40 12:56:06 Get A/D value=-858993460 result=40 12:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:06 Aux= 12:56:06 Message to Camera, serial 277632 queued 12:56:43 Received message from Master: op=PointingHead serial=277645 12:56:43 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 12:56:43 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 12:56:43 Point started: ret=0 12:56:43 point_skyscan result=0 12:56:44 Check angles 12:56:44 SkyScan query 12:56:45 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 12:56:45 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 12:56:45 Check angles 12:56:45 SkyScan query 12:56:45 SkyScan query done: ret=0 az=153.585<-10239 ze=-6.495<-12433 Statuses=0009 0008 12:56:45 Msec=750 True Az=153.585 Ze=-6.495 Az status=0009 Ze status=0008 12:56:46 Check angles 12:56:46 SkyScan query 12:56:46 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 12:56:46 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 12:56:46 Check angles 12:56:46 SkyScan query 12:56:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 12:56:47 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 12:56:47 Message to Master queued w/err=0: serial=277645 error=0 12:56:52 Received message from Master: op=Filter serial=277646 12:56:52 Color wheel filter change from 0 to 0 12:56:52 FLIGetFilterPos err=0 currentPosition=0 12:56:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:52 Filter is already there-color wheel unchanged 12:56:52 Received message from Master: op=Shutter serial=277647 12:56:52 Shutter LASER close 12:56:52 Received message from Camera: op=State serial=277649 12:56:52 GetSingleValue result=40 Value=cccccccc 12:56:52 SkyScan query 12:56:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 12:56:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:53 Parameters OK 12:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:53 Set A/D data flow result=40 12:56:53 Set A/D channel type result=40 12:56:53 Set A/D encoding result=40 12:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:53 Set channel filter=0.000000e+000 result=40 12:56:53 Config A/D Result=40 12:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:53 Get A/D filter: -9.255963e+061 result=40 12:56:53 Get A/D value=-858993460 result=40 12:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:53 Parameters OK 12:56:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:53 Set A/D data flow result=40 12:56:53 Set A/D channel type result=40 12:56:53 Set A/D encoding result=40 12:56:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:53 Set channel filter=0.000000e+000 result=40 12:56:53 Config A/D Result=40 12:56:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:53 Get A/D filter: -9.255963e+061 result=40 12:56:53 Get A/D value=-858993460 result=40 12:56:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:53 Aux= 12:56:53 Message to Camera, serial 277649 queued 12:57:30 Received message from Master: op=PointingHead serial=277662 12:57:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:57:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:57:30 Point started: ret=0 12:57:30 point_skyscan result=0 12:57:31 Check angles 12:57:31 SkyScan query 12:57:31 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 12:57:31 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 12:57:31 Check angles 12:57:31 SkyScan query 12:57:32 SkyScan query done: ret=0 az=135.06<-9004 ze=6.495<-11567 Statuses=0009 0008 12:57:32 Msec=750 True Az=135.06 Ze=6.495 Az status=0009 Ze status=0008 12:57:32 Check angles 12:57:32 SkyScan query 12:57:33 SkyScan query done: ret=0 az=117.54<-7836 ze=6.495<-11567 Statuses=0009 0008 12:57:33 Msec=1500 True Az=117.54 Ze=6.495 Az status=0009 Ze status=0008 12:57:33 Check angles 12:57:33 SkyScan query 12:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:33 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:57:33 Message to Master queued w/err=0: serial=277662 error=0 12:57:38 Received message from Master: op=Filter serial=277663 12:57:38 Color wheel filter change from 0 to 0 12:57:38 FLIGetFilterPos err=0 currentPosition=0 12:57:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:38 Filter is already there-color wheel unchanged 12:57:39 Received message from Master: op=Shutter serial=277664 12:57:39 Shutter LASER close 12:57:39 Received message from Camera: op=State serial=277666 12:57:39 GetSingleValue result=40 Value=cccccccc 12:57:39 SkyScan query 12:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:57:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:39 Parameters OK 12:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:39 Set A/D data flow result=40 12:57:39 Set A/D channel type result=40 12:57:39 Set A/D encoding result=40 12:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:39 Set channel filter=0.000000e+000 result=40 12:57:39 Config A/D Result=40 12:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:39 Get A/D filter: -9.255963e+061 result=40 12:57:39 Get A/D value=-858993460 result=40 12:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:39 Parameters OK 12:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:39 Set A/D data flow result=40 12:57:39 Set A/D channel type result=40 12:57:39 Set A/D encoding result=40 12:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:39 Set channel filter=0.000000e+000 result=40 12:57:39 Config A/D Result=40 12:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:39 Get A/D filter: -9.255963e+061 result=40 12:57:39 Get A/D value=-858993460 result=40 12:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:39 Aux= 12:57:39 Message to Camera, serial 277666 queued 12:58:16 Received message from Master: op=PointingHead serial=277679 12:58:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:58:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:58:16 Point started: ret=0 12:58:16 point_skyscan result=0 12:58:17 Check angles 12:58:17 SkyScan query 12:58:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.625<-13575 Statuses=0008 0009 12:58:18 Msec=0 True Az=112.995 Ze=-23.625 Az status=0008 Ze status=0009 12:58:18 Check angles 12:58:18 SkyScan query 12:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 12:58:19 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 12:58:19 Check angles 12:58:19 SkyScan query 12:58:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.97<-16398 Statuses=0008 0009 12:58:19 Msec=1500 True Az=112.995 Ze=-65.97 Az status=0008 Ze status=0009 12:58:19 Check angles 12:58:19 SkyScan query 12:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 12:58:20 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 12:58:20 Check angles 12:58:20 SkyScan query 12:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.925<-19195 Statuses=0008 0009 12:58:21 Msec=3000 True Az=112.995 Ze=-107.925 Az status=0008 Ze status=0009 12:58:21 Check angles 12:58:21 SkyScan query 12:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.3<-20620 Statuses=0008 0009 12:58:22 Msec=3750 True Az=112.995 Ze=-129.3 Az status=0008 Ze status=0009 12:58:22 Check angles 12:58:22 SkyScan query 12:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.615<-22041 Statuses=0008 0009 12:58:22 Msec=4500 True Az=112.995 Ze=-150.615 Az status=0008 Ze status=0009 12:58:23 Check angles 12:58:23 SkyScan query 12:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.345<-23423 Statuses=0008 0009 12:58:23 Msec=5250 True Az=112.995 Ze=-171.345 Az status=0008 Ze status=0009 12:58:23 Check angles 12:58:23 SkyScan query 12:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:58:24 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:58:24 Message to Master queued w/err=0: serial=277679 error=0 12:58:29 Received message from Master: op=Filter serial=277680 12:58:29 Color wheel filter change from 0 to 0 12:58:29 FLIGetFilterPos err=0 currentPosition=0 12:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:29 Filter is already there-color wheel unchanged 12:58:29 Received message from Master: op=Shutter serial=277681 12:58:29 Shutter LASER open 12:58:29 Received message from Camera: op=State serial=277683 12:58:29 GetSingleValue result=40 Value=cccccccc 12:58:29 SkyScan query 12:58:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:58:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:30 Parameters OK 12:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:30 Set A/D data flow result=40 12:58:30 Set A/D channel type result=40 12:58:30 Set A/D encoding result=40 12:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:30 Set channel filter=0.000000e+000 result=40 12:58:30 Config A/D Result=40 12:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:30 Get A/D filter: -9.255963e+061 result=40 12:58:30 Get A/D value=-858993460 result=40 12:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:30 Parameters OK 12:58:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:30 Set A/D data flow result=40 12:58:30 Set A/D channel type result=40 12:58:30 Set A/D encoding result=40 12:58:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:30 Set channel filter=0.000000e+000 result=40 12:58:30 Config A/D Result=40 12:58:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:30 Get A/D filter: -9.255963e+061 result=40 12:58:30 Get A/D value=-858993460 result=40 12:58:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:30 Aux= 12:58:30 Message to Camera, serial 277683 queued 12:58:37 Received message from Master: op=Shutter serial=277692 12:58:37 Shutter LASER close 12:58:38 Received message from Master: op=PointingHead serial=277696 12:58:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:58:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:58:38 Point started: ret=0 12:58:38 point_skyscan result=0 12:58:39 Check angles 12:58:39 SkyScan query 12:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 12:58:39 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 12:58:40 Check angles 12:58:40 SkyScan query 12:58:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.515<-20101 Statuses=0008 0009 12:58:40 Msec=750 True Az=112.995 Ze=-121.515 Az status=0008 Ze status=0009 12:58:40 Check angles 12:58:40 SkyScan query 12:58:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.56<-18704 Statuses=0008 0009 12:58:41 Msec=1500 True Az=112.995 Ze=-100.56 Az status=0008 Ze status=0009 12:58:41 Check angles 12:58:41 SkyScan query 12:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 12:58:42 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 12:58:42 Check angles 12:58:42 SkyScan query 12:58:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.185<-15879 Statuses=0008 0009 12:58:42 Msec=3000 True Az=112.995 Ze=-58.185 Az status=0008 Ze status=0009 12:58:43 Check angles 12:58:43 SkyScan query 12:58:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.29<-14486 Statuses=0008 0009 12:58:43 Msec=3750 True Az=112.995 Ze=-37.29 Az status=0008 Ze status=0009 12:58:43 Check angles 12:58:43 SkyScan query 12:58:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.305<-13087 Statuses=0008 0009 12:58:44 Msec=4500 True Az=112.995 Ze=-16.305 Az status=0008 Ze status=0009 12:58:44 Check angles 12:58:44 SkyScan query 12:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=4.83<-11678 Statuses=0008 0009 12:58:45 Msec=5250 True Az=112.995 Ze=4.83 Az status=0008 Ze status=0009 12:58:45 Check angles 12:58:45 SkyScan query 12:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 12:58:45 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 12:58:45 Message to Master queued w/err=0: serial=277696 error=0 12:58:50 Received message from Master: op=Filter serial=277697 12:58:50 Color wheel filter change from 0 to 0 12:58:50 FLIGetFilterPos err=0 currentPosition=0 12:58:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:50 Filter is already there-color wheel unchanged 12:58:51 Received message from Master: op=Shutter serial=277698 12:58:51 Shutter LASER close 12:58:51 Received message from Camera: op=State serial=277700 12:58:51 GetSingleValue result=40 Value=cccccccc 12:58:51 SkyScan query 12:58:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:51 Parameters OK 12:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:51 Set A/D data flow result=40 12:58:51 Set A/D channel type result=40 12:58:51 Set A/D encoding result=40 12:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:51 Set channel filter=0.000000e+000 result=40 12:58:51 Config A/D Result=40 12:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:51 Get A/D filter: -9.255963e+061 result=40 12:58:51 Get A/D value=-858993460 result=40 12:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:51 Parameters OK 12:58:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:51 Set A/D data flow result=40 12:58:51 Set A/D channel type result=40 12:58:51 Set A/D encoding result=40 12:58:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:51 Set channel filter=0.000000e+000 result=40 12:58:51 Config A/D Result=40 12:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:51 Get A/D filter: -9.255963e+061 result=40 12:58:51 Get A/D value=-858993460 result=40 12:58:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:51 Aux= 12:58:51 Message to Camera, serial 277700 queued 12:59:28 Received message from Master: op=PointingHead serial=277713 12:59:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 12:59:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 12:59:29 Point started: ret=0 12:59:29 point_skyscan result=0 12:59:29 Check angles 12:59:29 SkyScan query 12:59:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 12:59:30 Message to Master queued w/err=0: serial=277713 error=0 12:59:35 Received message from Master: op=Filter serial=277714 12:59:35 Color wheel filter change from 0 to 0 12:59:35 FLIGetFilterPos err=0 currentPosition=0 12:59:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:35 Filter is already there-color wheel unchanged 12:59:35 Received message from Master: op=Shutter serial=277715 12:59:35 Shutter LASER close 12:59:35 Received message from Camera: op=State serial=277717 12:59:35 GetSingleValue result=40 Value=cccccccc 12:59:35 SkyScan query 12:59:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 12:59:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:36 Parameters OK 12:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:36 Set A/D data flow result=40 12:59:36 Set A/D channel type result=40 12:59:36 Set A/D encoding result=40 12:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:36 Set channel filter=0.000000e+000 result=40 12:59:36 Config A/D Result=40 12:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:36 Get A/D filter: -9.255963e+061 result=40 12:59:36 Get A/D value=-858993460 result=40 12:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:36 Parameters OK 12:59:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:36 Set A/D data flow result=40 12:59:36 Set A/D channel type result=40 12:59:36 Set A/D encoding result=40 12:59:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:36 Set channel filter=0.000000e+000 result=40 12:59:36 Config A/D Result=40 12:59:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:36 Get A/D filter: -9.255963e+061 result=40 12:59:36 Get A/D value=-858993460 result=40 12:59:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:36 Aux= 12:59:36 Message to Camera, serial 277717 queued 13:00:13 Received message from Master: op=PointingHead serial=277730 13:00:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:00:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:00:13 Point started: ret=0 13:00:13 point_skyscan result=0 13:00:14 Check angles 13:00:14 SkyScan query 13:00:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:00:14 Message to Master queued w/err=0: serial=277730 error=0 13:00:19 Received message from Master: op=Filter serial=277731 13:00:19 Color wheel filter change from 0 to 0 13:00:19 FLIGetFilterPos err=0 currentPosition=0 13:00:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:19 Filter is already there-color wheel unchanged 13:00:19 Received message from Master: op=Shutter serial=277732 13:00:19 Shutter LASER close 13:00:19 Received message from Camera: op=State serial=277734 13:00:19 GetSingleValue result=40 Value=cccccccc 13:00:19 SkyScan query 13:00:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:20 Parameters OK 13:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:20 Set A/D data flow result=40 13:00:20 Set A/D channel type result=40 13:00:20 Set A/D encoding result=40 13:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:20 Set channel filter=0.000000e+000 result=40 13:00:20 Config A/D Result=40 13:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:20 Get A/D filter: -9.255963e+061 result=40 13:00:20 Get A/D value=-858993460 result=40 13:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:20 Parameters OK 13:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:20 Set A/D data flow result=40 13:00:20 Set A/D channel type result=40 13:00:20 Set A/D encoding result=40 13:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:20 Set channel filter=0.000000e+000 result=40 13:00:20 Config A/D Result=40 13:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:20 Get A/D filter: -9.255963e+061 result=40 13:00:20 Get A/D value=-858993460 result=40 13:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:20 Aux= 13:00:20 Message to Camera, serial 277734 queued 13:00:57 Received message from Master: op=PointingHead serial=277747 13:00:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:00:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:00:57 Point started: ret=0 13:00:57 point_skyscan result=0 13:00:58 Check angles 13:00:58 SkyScan query 13:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:00:58 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:00:58 Message to Master queued w/err=0: serial=277747 error=0 13:01:03 Received message from Master: op=Filter serial=277748 13:01:03 Color wheel filter change from 0 to 0 13:01:03 FLIGetFilterPos err=0 currentPosition=0 13:01:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:03 Filter is already there-color wheel unchanged 13:01:04 Received message from Master: op=Shutter serial=277749 13:01:04 Shutter LASER close 13:01:04 Received message from Camera: op=State serial=277751 13:01:04 GetSingleValue result=40 Value=cccccccc 13:01:04 SkyScan query 13:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:01:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:04 Parameters OK 13:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:04 Set A/D data flow result=40 13:01:04 Set A/D channel type result=40 13:01:04 Set A/D encoding result=40 13:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:04 Set channel filter=0.000000e+000 result=40 13:01:04 Config A/D Result=40 13:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:04 Get A/D filter: -9.255963e+061 result=40 13:01:04 Get A/D value=-858993460 result=40 13:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:04 Parameters OK 13:01:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:04 Set A/D data flow result=40 13:01:04 Set A/D channel type result=40 13:01:04 Set A/D encoding result=40 13:01:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:04 Set channel filter=0.000000e+000 result=40 13:01:04 Config A/D Result=40 13:01:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:04 Get A/D filter: -9.255963e+061 result=40 13:01:04 Get A/D value=-858993460 result=40 13:01:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:04 Aux= 13:01:04 Message to Camera, serial 277751 queued 13:01:41 Received message from Master: op=PointingHead serial=277764 13:01:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:01:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:01:41 Point started: ret=0 13:01:41 point_skyscan result=0 13:01:42 Check angles 13:01:42 SkyScan query 13:01:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.385<-13559 Statuses=0008 0009 13:01:43 Msec=0 True Az=112.995 Ze=-23.385 Az status=0008 Ze status=0009 13:01:43 Check angles 13:01:43 SkyScan query 13:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 13:01:44 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 13:01:44 Check angles 13:01:44 SkyScan query 13:01:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.18<-16412 Statuses=0008 0009 13:01:44 Msec=1500 True Az=112.995 Ze=-66.18 Az status=0008 Ze status=0009 13:01:44 Check angles 13:01:44 SkyScan query 13:01:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 13:01:45 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 13:01:45 Check angles 13:01:45 SkyScan query 13:01:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.51<-19234 Statuses=0008 0009 13:01:46 Msec=3000 True Az=112.995 Ze=-108.51 Az status=0008 Ze status=0009 13:01:46 Check angles 13:01:46 SkyScan query 13:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.885<-20659 Statuses=0008 0009 13:01:47 Msec=3750 True Az=112.995 Ze=-129.885 Az status=0008 Ze status=0009 13:01:47 Check angles 13:01:47 SkyScan query 13:01:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-151.275<-22085 Statuses=0008 0009 13:01:47 Msec=4500 True Az=112.995 Ze=-151.275 Az status=0008 Ze status=0009 13:01:48 Check angles 13:01:48 SkyScan query 13:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.795<-23453 Statuses=0008 0009 13:01:48 Msec=5250 True Az=112.995 Ze=-171.795 Az status=0008 Ze status=0009 13:01:48 Check angles 13:01:48 SkyScan query 13:01:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:01:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:01:49 Message to Master queued w/err=0: serial=277764 error=0 13:01:54 Received message from Master: op=Filter serial=277765 13:01:54 Color wheel filter change from 0 to 0 13:01:54 FLIGetFilterPos err=0 currentPosition=0 13:01:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:54 Filter is already there-color wheel unchanged 13:01:54 Received message from Master: op=Shutter serial=277766 13:01:54 Shutter LASER open 13:01:54 Received message from Camera: op=State serial=277768 13:01:54 GetSingleValue result=40 Value=cccccccc 13:01:54 SkyScan query 13:01:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:01:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:55 Parameters OK 13:01:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:55 Set A/D data flow result=40 13:01:55 Set A/D channel type result=40 13:01:55 Set A/D encoding result=40 13:01:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:55 Set channel filter=0.000000e+000 result=40 13:01:55 Config A/D Result=40 13:01:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:55 Get A/D filter: -9.255963e+061 result=40 13:01:55 Get A/D value=-858993460 result=40 13:01:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:55 Parameters OK 13:01:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:55 Set A/D data flow result=40 13:01:55 Set A/D channel type result=40 13:01:55 Set A/D encoding result=40 13:01:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:55 Set channel filter=0.000000e+000 result=40 13:01:55 Config A/D Result=40 13:01:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:55 Get A/D filter: -9.255963e+061 result=40 13:01:55 Get A/D value=-858993460 result=40 13:01:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:55 Aux= 13:01:55 Message to Camera, serial 277768 queued 13:02:03 Received message from Master: op=Shutter serial=277778 13:02:03 Shutter LASER close 13:02:04 Received message from Master: op=PointingHead serial=277782 13:02:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:02:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:02:04 Point started: ret=0 13:02:04 point_skyscan result=0 13:02:05 Check angles 13:02:05 SkyScan query 13:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 13:02:05 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 13:02:06 Check angles 13:02:06 SkyScan query 13:02:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.535<-20169 Statuses=0008 0009 13:02:06 Msec=750 True Az=112.995 Ze=-122.535 Az status=0008 Ze status=0009 13:02:06 Check angles 13:02:06 SkyScan query 13:02:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 13:02:07 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 13:02:07 Check angles 13:02:07 SkyScan query 13:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 13:02:08 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 13:02:08 Check angles 13:02:08 SkyScan query 13:02:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.67<-15978 Statuses=0008 0009 13:02:08 Msec=3000 True Az=112.995 Ze=-59.67 Az status=0008 Ze status=0009 13:02:09 Check angles 13:02:09 SkyScan query 13:02:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.205<-14547 Statuses=0008 0009 13:02:09 Msec=3750 True Az=112.995 Ze=-38.205 Az status=0008 Ze status=0009 13:02:09 Check angles 13:02:09 SkyScan query 13:02:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.295<-13153 Statuses=0008 0009 13:02:10 Msec=4500 True Az=112.995 Ze=-17.295 Az status=0008 Ze status=0009 13:02:10 Check angles 13:02:10 SkyScan query 13:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=3.72<-11752 Statuses=0008 0009 13:02:11 Msec=5250 True Az=112.995 Ze=3.72 Az status=0008 Ze status=0009 13:02:11 Check angles 13:02:11 SkyScan query 13:02:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:02:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:02:11 Message to Master queued w/err=0: serial=277782 error=0 13:02:16 Received message from Master: op=Filter serial=277783 13:02:16 Color wheel filter change from 0 to 0 13:02:16 FLIGetFilterPos err=0 currentPosition=0 13:02:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:16 Filter is already there-color wheel unchanged 13:02:17 Received message from Master: op=Shutter serial=277784 13:02:17 Shutter LASER close 13:02:17 Received message from Camera: op=State serial=277786 13:02:17 GetSingleValue result=40 Value=cccccccc 13:02:17 SkyScan query 13:02:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:17 Parameters OK 13:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:17 Set A/D data flow result=40 13:02:17 Set A/D channel type result=40 13:02:17 Set A/D encoding result=40 13:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:17 Set channel filter=0.000000e+000 result=40 13:02:17 Config A/D Result=40 13:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:17 Get A/D filter: -9.255963e+061 result=40 13:02:17 Get A/D value=-858993460 result=40 13:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:17 Parameters OK 13:02:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:17 Set A/D data flow result=40 13:02:17 Set A/D channel type result=40 13:02:17 Set A/D encoding result=40 13:02:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:17 Set channel filter=0.000000e+000 result=40 13:02:17 Config A/D Result=40 13:02:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:17 Get A/D filter: -9.255963e+061 result=40 13:02:17 Get A/D value=-858993460 result=40 13:02:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:17 Aux= 13:02:17 Message to Camera, serial 277786 queued 13:02:54 Received message from Master: op=PointingHead serial=277799 13:02:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:02:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:02:55 Point started: ret=0 13:02:55 point_skyscan result=0 13:02:55 Check angles 13:02:55 SkyScan query 13:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:02:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:02:56 Message to Master queued w/err=0: serial=277799 error=0 13:03:01 Received message from Master: op=Filter serial=277800 13:03:01 Color wheel filter change from 0 to 0 13:03:01 FLIGetFilterPos err=0 currentPosition=0 13:03:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:01 Filter is already there-color wheel unchanged 13:03:01 Received message from Master: op=Shutter serial=277801 13:03:01 Shutter LASER close 13:03:01 Received message from Camera: op=State serial=277803 13:03:01 GetSingleValue result=40 Value=cccccccc 13:03:01 SkyScan query 13:03:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:03:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:02 Parameters OK 13:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:02 Set A/D data flow result=40 13:03:02 Set A/D channel type result=40 13:03:02 Set A/D encoding result=40 13:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:02 Set channel filter=0.000000e+000 result=40 13:03:02 Config A/D Result=40 13:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:02 Get A/D filter: -9.255963e+061 result=40 13:03:02 Get A/D value=-858993460 result=40 13:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:02 Parameters OK 13:03:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:02 Set A/D data flow result=40 13:03:02 Set A/D channel type result=40 13:03:02 Set A/D encoding result=40 13:03:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:02 Set channel filter=0.000000e+000 result=40 13:03:02 Config A/D Result=40 13:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:02 Get A/D filter: -9.255963e+061 result=40 13:03:02 Get A/D value=-858993460 result=40 13:03:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:02 Aux= 13:03:02 Message to Camera, serial 277803 queued 13:03:35 Received message from Master: op=Identify serial=277810 13:03:39 Received message from Master: op=PointingHead serial=277819 13:03:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:03:39 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:03:39 Point started: ret=0 13:03:39 point_skyscan result=0 13:03:40 Check angles 13:03:40 SkyScan query 13:03:40 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 13:03:40 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 13:03:40 Check angles 13:03:40 SkyScan query 13:03:41 SkyScan query done: ret=0 az=153.495<-10233 ze=-6.495<-12433 Statuses=0009 0008 13:03:41 Msec=750 True Az=153.495 Ze=-6.495 Az status=0009 Ze status=0008 13:03:41 Check angles 13:03:41 SkyScan query 13:03:42 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 13:03:42 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 13:03:42 Check angles 13:03:42 SkyScan query 13:03:43 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 13:03:43 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 13:03:43 Message to Master queued w/err=0: serial=277819 error=0 13:03:48 Received message from Master: op=Filter serial=277820 13:03:48 Color wheel filter change from 0 to 0 13:03:48 FLIGetFilterPos err=0 currentPosition=0 13:03:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:48 Filter is already there-color wheel unchanged [UTC 2019-3-14 13:03:48] 13:03:48 Received message from Master: op=Shutter serial=277821 13:03:48 Shutter LASER close 13:03:48 Received message from Camera: op=State serial=277823 13:03:48 GetSingleValue result=40 Value=cccccccc 13:03:48 SkyScan query 13:03:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:03:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:48 Parameters OK 13:03:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:48 Set A/D data flow result=40 13:03:48 Set A/D channel type result=40 13:03:48 Set A/D encoding result=40 13:03:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:48 Set channel filter=0.000000e+000 result=40 13:03:48 Config A/D Result=40 13:03:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:48 Get A/D filter: -9.255963e+061 result=40 13:03:48 Get A/D value=-858993460 result=40 13:03:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:48 Parameters OK 13:03:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:48 Set A/D data flow result=40 13:03:48 Set A/D channel type result=40 13:03:48 Set A/D encoding result=40 13:03:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:48 Set channel filter=0.000000e+000 result=40 13:03:48 Config A/D Result=40 13:03:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:48 Get A/D filter: -9.255963e+061 result=40 13:03:48 Get A/D value=-858993460 result=40 13:03:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:48 Aux= 13:03:48 Message to Camera, serial 277823 queued 13:04:25 Received message from Master: op=PointingHead serial=277836 13:04:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:04:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:04:26 Point started: ret=0 13:04:26 point_skyscan result=0 13:04:26 Check angles 13:04:26 SkyScan query 13:04:27 SkyScan query done: ret=0 az=152.91<-10194 ze=6.51<-11566 Statuses=0009 0008 13:04:27 Msec=0 True Az=152.91 Ze=6.51 Az status=0009 Ze status=0008 13:04:27 Check angles 13:04:27 SkyScan query 13:04:28 SkyScan query done: ret=0 az=135.135<-9009 ze=6.495<-11567 Statuses=0009 0008 13:04:28 Msec=750 True Az=135.135 Ze=6.495 Az status=0009 Ze status=0008 13:04:28 Check angles 13:04:28 SkyScan query 13:04:28 SkyScan query done: ret=0 az=117.255<-7817 ze=6.495<-11567 Statuses=0009 0008 13:04:28 Msec=1500 True Az=117.255 Ze=6.495 Az status=0009 Ze status=0008 13:04:29 Check angles 13:04:29 SkyScan query 13:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:29 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:04:29 Message to Master queued w/err=0: serial=277836 error=0 13:04:34 Received message from Master: op=Filter serial=277837 13:04:34 Color wheel filter change from 0 to 0 13:04:34 FLIGetFilterPos err=0 currentPosition=0 13:04:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:34 Filter is already there-color wheel unchanged 13:04:34 Received message from Master: op=Shutter serial=277838 13:04:34 Shutter LASER close 13:04:34 Received message from Camera: op=State serial=277840 13:04:34 GetSingleValue result=40 Value=cccccccc 13:04:34 SkyScan query 13:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:04:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:35 Parameters OK 13:04:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:35 Set A/D data flow result=40 13:04:35 Set A/D channel type result=40 13:04:35 Set A/D encoding result=40 13:04:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:35 Set channel filter=0.000000e+000 result=40 13:04:35 Config A/D Result=40 13:04:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:35 Get A/D filter: -9.255963e+061 result=40 13:04:35 Get A/D value=-858993460 result=40 13:04:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:35 Parameters OK 13:04:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:35 Set A/D data flow result=40 13:04:35 Set A/D channel type result=40 13:04:35 Set A/D encoding result=40 13:04:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:35 Set channel filter=0.000000e+000 result=40 13:04:35 Config A/D Result=40 13:04:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:35 Get A/D filter: -9.255963e+061 result=40 13:04:35 Get A/D value=-858993460 result=40 13:04:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:35 Aux= 13:04:35 Message to Camera, serial 277840 queued 13:05:12 Received message from Master: op=PointingHead serial=277853 13:05:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:05:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:05:12 Point started: ret=0 13:05:12 point_skyscan result=0 13:05:13 Check angles 13:05:13 SkyScan query 13:05:13 SkyScan query done: ret=0 az=112.98<-7532 ze=-23.385<-13559 Statuses=0008 0009 13:05:13 Msec=0 True Az=112.98 Ze=-23.385 Az status=0008 Ze status=0009 13:05:14 Check angles 13:05:14 SkyScan query 13:05:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.76<-14984 Statuses=0008 0009 13:05:14 Msec=750 True Az=112.995 Ze=-44.76 Az status=0008 Ze status=0009 13:05:14 Check angles 13:05:14 SkyScan query 13:05:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 13:05:15 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 13:05:15 Check angles 13:05:15 SkyScan query 13:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 13:05:16 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 13:05:16 Check angles 13:05:16 SkyScan query 13:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 13:05:16 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 13:05:17 Check angles 13:05:17 SkyScan query 13:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.61<-20574 Statuses=0008 0009 13:05:17 Msec=3750 True Az=112.995 Ze=-128.61 Az status=0008 Ze status=0009 13:05:17 Check angles 13:05:17 SkyScan query 13:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 13:05:18 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 13:05:18 Check angles 13:05:18 SkyScan query 13:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 13:05:19 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 13:05:19 Check angles 13:05:19 SkyScan query 13:05:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:05:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:05:19 Message to Master queued w/err=0: serial=277853 error=0 13:05:24 Received message from Master: op=Filter serial=277854 13:05:24 Color wheel filter change from 0 to 0 13:05:24 FLIGetFilterPos err=0 currentPosition=0 13:05:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:24 Filter is already there-color wheel unchanged 13:05:25 Received message from Master: op=Shutter serial=277855 13:05:25 Shutter LASER open 13:05:25 Received message from Camera: op=State serial=277857 13:05:25 GetSingleValue result=40 Value=cccccccc 13:05:25 SkyScan query 13:05:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:05:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:25 Parameters OK 13:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:25 Set A/D data flow result=40 13:05:25 Set A/D channel type result=40 13:05:25 Set A/D encoding result=40 13:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:25 Set channel filter=0.000000e+000 result=40 13:05:25 Config A/D Result=40 13:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:25 Get A/D filter: -9.255963e+061 result=40 13:05:25 Get A/D value=-858993460 result=40 13:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:25 Parameters OK 13:05:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:25 Set A/D data flow result=40 13:05:25 Set A/D channel type result=40 13:05:25 Set A/D encoding result=40 13:05:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:25 Set channel filter=0.000000e+000 result=40 13:05:25 Config A/D Result=40 13:05:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:25 Get A/D filter: -9.255963e+061 result=40 13:05:25 Get A/D value=-858993460 result=40 13:05:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:25 Aux= 13:05:25 Message to Camera, serial 277857 queued 13:05:34 Received message from Master: op=Shutter serial=277867 13:05:34 Shutter LASER close 13:05:34 Received message from Master: op=PointingHead serial=277871 13:05:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:05:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:05:35 Point started: ret=0 13:05:35 point_skyscan result=0 13:05:35 Check angles 13:05:35 SkyScan query 13:05:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 13:05:36 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 13:05:36 Check angles 13:05:36 SkyScan query 13:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.295<-20153 Statuses=0008 0009 13:05:37 Msec=750 True Az=112.995 Ze=-122.295 Az status=0008 Ze status=0009 13:05:37 Check angles 13:05:37 SkyScan query 13:05:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 13:05:37 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 13:05:38 Check angles 13:05:38 SkyScan query 13:05:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.385<-17359 Statuses=0008 0009 13:05:38 Msec=2250 True Az=112.995 Ze=-80.385 Az status=0008 Ze status=0009 13:05:38 Check angles 13:05:38 SkyScan query 13:05:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.445<-15963 Statuses=0008 0009 13:05:39 Msec=3000 True Az=112.995 Ze=-59.445 Az status=0008 Ze status=0009 13:05:39 Check angles 13:05:39 SkyScan query 13:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.445<-14563 Statuses=0008 0009 13:05:40 Msec=3750 True Az=112.995 Ze=-38.445 Az status=0008 Ze status=0009 13:05:40 Check angles 13:05:40 SkyScan query 13:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.505<-13167 Statuses=0008 0009 13:05:40 Msec=4500 True Az=112.995 Ze=-17.505 Az status=0008 Ze status=0009 13:05:41 Check angles 13:05:41 SkyScan query 13:05:41 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 13:05:41 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 13:05:41 Check angles 13:05:41 SkyScan query 13:05:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:05:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:05:42 Message to Master queued w/err=0: serial=277871 error=0 13:05:47 Received message from Master: op=Filter serial=277872 13:05:47 Color wheel filter change from 0 to 0 13:05:47 FLIGetFilterPos err=0 currentPosition=0 13:05:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:47 Filter is already there-color wheel unchanged 13:05:47 Received message from Master: op=Shutter serial=277873 13:05:47 Shutter LASER close 13:05:47 Received message from Camera: op=State serial=277875 13:05:47 GetSingleValue result=40 Value=cccccccc 13:05:47 SkyScan query 13:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:05:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:48 Parameters OK 13:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:48 Set A/D data flow result=40 13:05:48 Set A/D channel type result=40 13:05:48 Set A/D encoding result=40 13:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:48 Set channel filter=0.000000e+000 result=40 13:05:48 Config A/D Result=40 13:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:48 Get A/D filter: -9.255963e+061 result=40 13:05:48 Get A/D value=-858993460 result=40 13:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:48 Parameters OK 13:05:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:48 Set A/D data flow result=40 13:05:48 Set A/D channel type result=40 13:05:48 Set A/D encoding result=40 13:05:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:48 Set channel filter=0.000000e+000 result=40 13:05:48 Config A/D Result=40 13:05:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:48 Get A/D filter: -9.255963e+061 result=40 13:05:48 Get A/D value=-858993460 result=40 13:05:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:48 Aux= 13:05:48 Message to Camera, serial 277875 queued 13:06:25 Received message from Master: op=PointingHead serial=277888 13:06:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:06:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:06:25 Point started: ret=0 13:06:25 point_skyscan result=0 13:06:26 Check angles 13:06:26 SkyScan query 13:06:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:06:26 Message to Master queued w/err=0: serial=277888 error=0 13:06:31 Received message from Master: op=Filter serial=277889 13:06:31 Color wheel filter change from 0 to 0 13:06:31 FLIGetFilterPos err=0 currentPosition=0 13:06:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:31 Filter is already there-color wheel unchanged 13:06:32 Received message from Master: op=Shutter serial=277890 13:06:32 Shutter LASER close 13:06:32 Received message from Camera: op=State serial=277892 13:06:32 GetSingleValue result=40 Value=cccccccc 13:06:32 SkyScan query 13:06:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:06:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:32 Parameters OK 13:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:32 Set A/D data flow result=40 13:06:32 Set A/D channel type result=40 13:06:32 Set A/D encoding result=40 13:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:32 Set channel filter=0.000000e+000 result=40 13:06:32 Config A/D Result=40 13:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:32 Get A/D filter: -9.255963e+061 result=40 13:06:32 Get A/D value=-858993460 result=40 13:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:32 Parameters OK 13:06:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:32 Set A/D data flow result=40 13:06:32 Set A/D channel type result=40 13:06:32 Set A/D encoding result=40 13:06:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:32 Set channel filter=0.000000e+000 result=40 13:06:32 Config A/D Result=40 13:06:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:32 Get A/D filter: -9.255963e+061 result=40 13:06:32 Get A/D value=-858993460 result=40 13:06:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:32 Aux= 13:06:32 Message to Camera, serial 277892 queued 13:07:09 Received message from Master: op=PointingHead serial=277905 13:07:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:07:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:07:09 Point started: ret=0 13:07:09 point_skyscan result=0 13:07:10 Check angles 13:07:10 SkyScan query 13:07:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:07:11 Message to Master queued w/err=0: serial=277905 error=0 13:07:16 Received message from Master: op=Filter serial=277906 13:07:16 Color wheel filter change from 0 to 0 13:07:16 FLIGetFilterPos err=0 currentPosition=0 13:07:16 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:16 Filter is already there-color wheel unchanged 13:07:16 Received message from Master: op=Shutter serial=277907 13:07:16 Shutter LASER close 13:07:16 Received message from Camera: op=State serial=277909 13:07:16 GetSingleValue result=40 Value=cccccccc 13:07:16 SkyScan query 13:07:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:16 Parameters OK 13:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:16 Set A/D data flow result=40 13:07:16 Set A/D channel type result=40 13:07:16 Set A/D encoding result=40 13:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:16 Set channel filter=0.000000e+000 result=40 13:07:16 Config A/D Result=40 13:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:16 Get A/D filter: -9.255963e+061 result=40 13:07:16 Get A/D value=-858993460 result=40 13:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:16 Parameters OK 13:07:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:16 Set A/D data flow result=40 13:07:16 Set A/D channel type result=40 13:07:16 Set A/D encoding result=40 13:07:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:16 Set channel filter=0.000000e+000 result=40 13:07:16 Config A/D Result=40 13:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:16 Get A/D filter: -9.255963e+061 result=40 13:07:16 Get A/D value=-858993460 result=40 13:07:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:16 Aux= 13:07:16 Message to Camera, serial 277909 queued 13:07:53 Received message from Master: op=PointingHead serial=277922 13:07:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:07:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:07:54 Point started: ret=0 13:07:54 point_skyscan result=0 13:07:54 Check angles 13:07:54 SkyScan query 13:07:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:07:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:07:55 Message to Master queued w/err=0: serial=277922 error=0 13:08:00 Received message from Master: op=Filter serial=277923 13:08:00 Color wheel filter change from 0 to 0 13:08:00 FLIGetFilterPos err=0 currentPosition=0 13:08:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:00 Filter is already there-color wheel unchanged 13:08:00 Received message from Master: op=Shutter serial=277924 13:08:00 Shutter LASER close 13:08:00 Received message from Camera: op=State serial=277926 13:08:00 GetSingleValue result=40 Value=cccccccc 13:08:00 SkyScan query 13:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:08:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:01 Parameters OK 13:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:01 Set A/D data flow result=40 13:08:01 Set A/D channel type result=40 13:08:01 Set A/D encoding result=40 13:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:01 Set channel filter=0.000000e+000 result=40 13:08:01 Config A/D Result=40 13:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:01 Get A/D filter: -9.255963e+061 result=40 13:08:01 Get A/D value=-858993460 result=40 13:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:01 Parameters OK 13:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:01 Set A/D data flow result=40 13:08:01 Set A/D channel type result=40 13:08:01 Set A/D encoding result=40 13:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:01 Set channel filter=0.000000e+000 result=40 13:08:01 Config A/D Result=40 13:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:01 Get A/D filter: -9.255963e+061 result=40 13:08:01 Get A/D value=-858993460 result=40 13:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:01 Aux= 13:08:01 Message to Camera, serial 277926 queued 13:08:38 Received message from Master: op=PointingHead serial=277939 13:08:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:08:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:08:38 Point started: ret=0 13:08:38 point_skyscan result=0 13:08:39 Check angles 13:08:39 SkyScan query 13:08:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.43<-13562 Statuses=0008 0009 13:08:39 Msec=0 True Az=112.995 Ze=-23.43 Az status=0008 Ze status=0009 13:08:40 Check angles 13:08:40 SkyScan query 13:08:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 13:08:40 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 13:08:40 Check angles 13:08:40 SkyScan query 13:08:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 13:08:41 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 13:08:41 Check angles 13:08:41 SkyScan query 13:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 13:08:42 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 13:08:42 Check angles 13:08:42 SkyScan query 13:08:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.685<-19179 Statuses=0008 0009 13:08:42 Msec=3000 True Az=112.995 Ze=-107.685 Az status=0008 Ze status=0009 13:08:43 Check angles 13:08:43 SkyScan query 13:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 13:08:43 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 13:08:43 Check angles 13:08:43 SkyScan query 13:08:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.61<-21974 Statuses=0008 0009 13:08:44 Msec=4500 True Az=112.995 Ze=-149.61 Az status=0008 Ze status=0009 13:08:44 Check angles 13:08:44 SkyScan query 13:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.535<-23369 Statuses=0008 0009 13:08:45 Msec=5250 True Az=112.995 Ze=-170.535 Az status=0008 Ze status=0009 13:08:45 Check angles 13:08:45 SkyScan query 13:08:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:08:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:08:45 Message to Master queued w/err=0: serial=277939 error=0 13:08:50 Received message from Master: op=Filter serial=277940 13:08:50 Color wheel filter change from 0 to 0 13:08:50 FLIGetFilterPos err=0 currentPosition=0 13:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:50 Filter is already there-color wheel unchanged 13:08:51 Received message from Master: op=Shutter serial=277941 13:08:51 Shutter LASER open 13:08:51 Received message from Camera: op=State serial=277943 13:08:51 GetSingleValue result=40 Value=cccccccc 13:08:51 SkyScan query 13:08:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:51 Parameters OK 13:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:51 Set A/D data flow result=40 13:08:51 Set A/D channel type result=40 13:08:51 Set A/D encoding result=40 13:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:51 Set channel filter=0.000000e+000 result=40 13:08:51 Config A/D Result=40 13:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:51 Get A/D filter: -9.255963e+061 result=40 13:08:51 Get A/D value=-858993460 result=40 13:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:51 Parameters OK 13:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:51 Set A/D data flow result=40 13:08:51 Set A/D channel type result=40 13:08:51 Set A/D encoding result=40 13:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:51 Set channel filter=0.000000e+000 result=40 13:08:51 Config A/D Result=40 13:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:51 Get A/D filter: -9.255963e+061 result=40 13:08:51 Get A/D value=-858993460 result=40 13:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:51 Aux= 13:08:51 Message to Camera, serial 277943 queued 13:09:00 Received message from Master: op=Shutter serial=277953 13:09:00 Shutter LASER close 13:09:00 Received message from Master: op=PointingHead serial=277957 13:09:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:09:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:09:01 Point started: ret=0 13:09:01 point_skyscan result=0 13:09:01 Check angles 13:09:01 SkyScan query 13:09:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.19<-21546 Statuses=0008 0009 13:09:02 Msec=0 True Az=112.995 Ze=-143.19 Az status=0008 Ze status=0009 13:09:02 Check angles 13:09:02 SkyScan query 13:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.235<-20149 Statuses=0008 0009 13:09:03 Msec=750 True Az=112.995 Ze=-122.235 Az status=0008 Ze status=0009 13:09:03 Check angles 13:09:03 SkyScan query 13:09:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.31<-18754 Statuses=0008 0009 13:09:03 Msec=1500 True Az=112.995 Ze=-101.31 Az status=0008 Ze status=0009 13:09:04 Check angles 13:09:04 SkyScan query 13:09:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.875<-17325 Statuses=0008 0009 13:09:04 Msec=2250 True Az=112.995 Ze=-79.875 Az status=0008 Ze status=0009 13:09:04 Check angles 13:09:04 SkyScan query 13:09:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 13:09:05 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 13:09:05 Check angles 13:09:05 SkyScan query 13:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 13:09:06 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 13:09:06 Check angles 13:09:06 SkyScan query 13:09:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.545<-13103 Statuses=0008 0009 13:09:06 Msec=4500 True Az=112.995 Ze=-16.545 Az status=0008 Ze status=0009 13:09:07 Check angles 13:09:07 SkyScan query 13:09:07 SkyScan query done: ret=0 az=112.995<-7533 ze=4.32<-11712 Statuses=0008 0009 13:09:07 Msec=5250 True Az=112.995 Ze=4.32 Az status=0008 Ze status=0009 13:09:07 Check angles 13:09:07 SkyScan query 13:09:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:09:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:09:08 Message to Master queued w/err=0: serial=277957 error=0 13:09:13 Received message from Master: op=Filter serial=277958 13:09:13 Color wheel filter change from 0 to 0 13:09:13 FLIGetFilterPos err=0 currentPosition=0 13:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:13 Filter is already there-color wheel unchanged 13:09:13 Received message from Master: op=Shutter serial=277959 13:09:13 Shutter LASER close 13:09:13 Received message from Camera: op=State serial=277961 13:09:13 GetSingleValue result=40 Value=cccccccc 13:09:13 SkyScan query 13:09:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:14 Parameters OK 13:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:14 Set A/D data flow result=40 13:09:14 Set A/D channel type result=40 13:09:14 Set A/D encoding result=40 13:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:14 Set channel filter=0.000000e+000 result=40 13:09:14 Config A/D Result=40 13:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:14 Get A/D filter: -9.255963e+061 result=40 13:09:14 Get A/D value=-858993460 result=40 13:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:14 Parameters OK 13:09:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:14 Set A/D data flow result=40 13:09:14 Set A/D channel type result=40 13:09:14 Set A/D encoding result=40 13:09:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:14 Set channel filter=0.000000e+000 result=40 13:09:14 Config A/D Result=40 13:09:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:14 Get A/D filter: -9.255963e+061 result=40 13:09:14 Get A/D value=-858993460 result=40 13:09:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:14 Aux= 13:09:14 Message to Camera, serial 277961 queued 13:09:51 Received message from Master: op=PointingHead serial=277974 13:09:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:09:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:09:51 Point started: ret=0 13:09:51 point_skyscan result=0 13:09:52 Check angles 13:09:52 SkyScan query 13:09:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:09:52 Message to Master queued w/err=0: serial=277974 error=0 13:09:57 Received message from Master: op=Filter serial=277975 13:09:57 Color wheel filter change from 0 to 0 13:09:57 FLIGetFilterPos err=0 currentPosition=0 13:09:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:57 Filter is already there-color wheel unchanged 13:09:58 Received message from Master: op=Shutter serial=277976 13:09:58 Shutter LASER close 13:09:58 Received message from Camera: op=State serial=277978 13:09:58 GetSingleValue result=40 Value=cccccccc 13:09:58 SkyScan query 13:09:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:09:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:58 Parameters OK 13:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:58 Set A/D data flow result=40 13:09:58 Set A/D channel type result=40 13:09:58 Set A/D encoding result=40 13:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:58 Set channel filter=0.000000e+000 result=40 13:09:58 Config A/D Result=40 13:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:58 Get A/D filter: -9.255963e+061 result=40 13:09:58 Get A/D value=-858993460 result=40 13:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:58 Parameters OK 13:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:58 Set A/D data flow result=40 13:09:58 Set A/D channel type result=40 13:09:58 Set A/D encoding result=40 13:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:58 Set channel filter=0.000000e+000 result=40 13:09:58 Config A/D Result=40 13:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:58 Get A/D filter: -9.255963e+061 result=40 13:09:58 Get A/D value=-858993460 result=40 13:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:58 Aux= 13:09:58 Message to Camera, serial 277978 queued 13:10:35 Received message from Master: op=PointingHead serial=277991 13:10:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:10:35 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:10:35 Point started: ret=0 13:10:35 point_skyscan result=0 13:10:36 Check angles 13:10:36 SkyScan query 13:10:37 SkyScan query done: ret=0 az=136.41<-9094 ze=-6.51<-12434 Statuses=0009 0008 13:10:37 Msec=0 True Az=136.41 Ze=-6.51 Az status=0009 Ze status=0008 13:10:37 Check angles 13:10:37 SkyScan query 13:10:37 SkyScan query done: ret=0 az=153.78<-10252 ze=-6.495<-12433 Statuses=0009 0008 13:10:37 Msec=750 True Az=153.78 Ze=-6.495 Az status=0009 Ze status=0008 13:10:38 Check angles 13:10:38 SkyScan query 13:10:38 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 13:10:38 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 13:10:38 Check angles 13:10:38 SkyScan query 13:10:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 13:10:39 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 13:10:39 Message to Master queued w/err=0: serial=277991 error=0 13:10:44 Received message from Master: op=Filter serial=277992 13:10:44 Color wheel filter change from 0 to 0 13:10:44 FLIGetFilterPos err=0 currentPosition=0 13:10:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:44 Filter is already there-color wheel unchanged 13:10:44 Received message from Master: op=Shutter serial=277993 13:10:44 Shutter LASER close 13:10:44 Received message from Camera: op=State serial=277995 13:10:44 GetSingleValue result=40 Value=cccccccc 13:10:44 SkyScan query 13:10:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:45 Parameters OK 13:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:45 Set A/D data flow result=40 13:10:45 Set A/D channel type result=40 13:10:45 Set A/D encoding result=40 13:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:45 Set channel filter=0.000000e+000 result=40 13:10:45 Config A/D Result=40 13:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:45 Get A/D filter: -9.255963e+061 result=40 13:10:45 Get A/D value=-858993460 result=40 13:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:45 Parameters OK 13:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:45 Set A/D data flow result=40 13:10:45 Set A/D channel type result=40 13:10:45 Set A/D encoding result=40 13:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:45 Set channel filter=0.000000e+000 result=40 13:10:45 Config A/D Result=40 13:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:45 Get A/D filter: -9.255963e+061 result=40 13:10:45 Get A/D value=-858993460 result=40 13:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:45 Aux= 13:10:45 Message to Camera, serial 277995 queued 13:11:22 Received message from Master: op=PointingHead serial=278008 13:11:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:11:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:11:22 Point started: ret=0 13:11:22 point_skyscan result=0 13:11:23 Check angles 13:11:23 SkyScan query 13:11:23 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 13:11:23 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 13:11:23 Check angles 13:11:23 SkyScan query 13:11:24 SkyScan query done: ret=0 az=135.765<-9051 ze=6.495<-11567 Statuses=0009 0008 13:11:24 Msec=750 True Az=135.765 Ze=6.495 Az status=0009 Ze status=0008 13:11:24 Check angles 13:11:24 SkyScan query 13:11:25 SkyScan query done: ret=0 az=118.155<-7877 ze=6.495<-11567 Statuses=0009 0008 13:11:25 Msec=1500 True Az=118.155 Ze=6.495 Az status=0009 Ze status=0008 13:11:25 Check angles 13:11:25 SkyScan query 13:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:25 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:11:25 Message to Master queued w/err=0: serial=278008 error=0 13:11:30 Received message from Master: op=Filter serial=278009 13:11:30 Color wheel filter change from 0 to 0 13:11:30 FLIGetFilterPos err=0 currentPosition=0 13:11:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:30 Filter is already there-color wheel unchanged 13:11:31 Received message from Master: op=Shutter serial=278010 13:11:31 Shutter LASER close 13:11:31 Received message from Camera: op=State serial=278012 13:11:31 GetSingleValue result=40 Value=cccccccc 13:11:31 SkyScan query 13:11:31 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:11:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:31 Parameters OK 13:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:31 Set A/D data flow result=40 13:11:31 Set A/D channel type result=40 13:11:31 Set A/D encoding result=40 13:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:31 Set channel filter=0.000000e+000 result=40 13:11:31 Config A/D Result=40 13:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:31 Get A/D filter: -9.255963e+061 result=40 13:11:31 Get A/D value=-858993460 result=40 13:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:31 Parameters OK 13:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:31 Set A/D data flow result=40 13:11:31 Set A/D channel type result=40 13:11:31 Set A/D encoding result=40 13:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:31 Set channel filter=0.000000e+000 result=40 13:11:31 Config A/D Result=40 13:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:31 Get A/D filter: -9.255963e+061 result=40 13:11:31 Get A/D value=-858993460 result=40 13:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:31 Aux= 13:11:31 Message to Camera, serial 278012 queued 13:12:08 Received message from Master: op=PointingHead serial=278025 13:12:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:12:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:12:08 Point started: ret=0 13:12:08 point_skyscan result=0 13:12:09 Check angles 13:12:09 SkyScan query 13:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.775<-13585 Statuses=0008 0009 13:12:10 Msec=0 True Az=112.995 Ze=-23.775 Az status=0008 Ze status=0009 13:12:10 Check angles 13:12:10 SkyScan query 13:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-45.15<-15010 Statuses=0008 0009 13:12:11 Msec=750 True Az=112.995 Ze=-45.15 Az status=0008 Ze status=0009 13:12:11 Check angles 13:12:11 SkyScan query 13:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.135<-16409 Statuses=0008 0009 13:12:11 Msec=1500 True Az=112.995 Ze=-66.135 Az status=0008 Ze status=0009 13:12:11 Check angles 13:12:11 SkyScan query 13:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 13:12:12 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 13:12:12 Check angles 13:12:12 SkyScan query 13:12:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.465<-19231 Statuses=0008 0009 13:12:13 Msec=3000 True Az=112.995 Ze=-108.465 Az status=0008 Ze status=0009 13:12:13 Check angles 13:12:13 SkyScan query 13:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.84<-20656 Statuses=0008 0009 13:12:14 Msec=3750 True Az=112.995 Ze=-129.84 Az status=0008 Ze status=0009 13:12:14 Check angles 13:12:14 SkyScan query 13:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.765<-22051 Statuses=0008 0009 13:12:14 Msec=4500 True Az=112.995 Ze=-150.765 Az status=0008 Ze status=0009 13:12:15 Check angles 13:12:15 SkyScan query 13:12:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 13:12:15 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 13:12:15 Check angles 13:12:15 SkyScan query 13:12:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:12:16 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:12:16 Message to Master queued w/err=0: serial=278025 error=0 13:12:21 Received message from Master: op=Filter serial=278026 13:12:21 Color wheel filter change from 0 to 0 13:12:21 FLIGetFilterPos err=0 currentPosition=0 13:12:21 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:21 Filter is already there-color wheel unchanged 13:12:21 Received message from Master: op=Shutter serial=278027 13:12:21 Shutter LASER open 13:12:21 Received message from Camera: op=State serial=278029 13:12:21 GetSingleValue result=40 Value=cccccccc 13:12:21 SkyScan query 13:12:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:12:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:22 Parameters OK 13:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:22 Set A/D data flow result=40 13:12:22 Set A/D channel type result=40 13:12:22 Set A/D encoding result=40 13:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:22 Set channel filter=0.000000e+000 result=40 13:12:22 Config A/D Result=40 13:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:22 Get A/D filter: -9.255963e+061 result=40 13:12:22 Get A/D value=-858993460 result=40 13:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:22 Parameters OK 13:12:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:22 Set A/D data flow result=40 13:12:22 Set A/D channel type result=40 13:12:22 Set A/D encoding result=40 13:12:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:22 Set channel filter=0.000000e+000 result=40 13:12:22 Config A/D Result=40 13:12:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:22 Get A/D filter: -9.255963e+061 result=40 13:12:22 Get A/D value=-858993460 result=40 13:12:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:22 Aux= 13:12:22 Message to Camera, serial 278029 queued 13:12:30 Received message from Master: op=Shutter serial=278039 13:12:30 Shutter LASER close 13:12:31 Received message from Master: op=PointingHead serial=278043 13:12:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:12:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:12:31 Point started: ret=0 13:12:31 point_skyscan result=0 13:12:32 Check angles 13:12:32 SkyScan query 13:12:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 13:12:32 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 13:12:33 Check angles 13:12:33 SkyScan query 13:12:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.74<-20116 Statuses=0008 0009 13:12:33 Msec=750 True Az=112.995 Ze=-121.74 Az status=0008 Ze status=0009 13:12:33 Check angles 13:12:33 SkyScan query 13:12:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.83<-18722 Statuses=0008 0009 13:12:34 Msec=1500 True Az=112.995 Ze=-100.83 Az status=0008 Ze status=0009 13:12:34 Check angles 13:12:34 SkyScan query 13:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.38<-17292 Statuses=0008 0009 13:12:35 Msec=2250 True Az=112.995 Ze=-79.38 Az status=0008 Ze status=0009 13:12:35 Check angles 13:12:35 SkyScan query 13:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.44<-15896 Statuses=0008 0009 13:12:35 Msec=3000 True Az=112.995 Ze=-58.44 Az status=0008 Ze status=0009 13:12:36 Check angles 13:12:36 SkyScan query 13:12:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.11<-14474 Statuses=0008 0009 13:12:36 Msec=3750 True Az=112.995 Ze=-37.11 Az status=0008 Ze status=0009 13:12:36 Check angles 13:12:36 SkyScan query 13:12:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 13:12:37 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 13:12:37 Check angles 13:12:37 SkyScan query 13:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=4.635<-11691 Statuses=0008 0009 13:12:38 Msec=5250 True Az=112.995 Ze=4.635 Az status=0008 Ze status=0009 13:12:38 Check angles 13:12:38 SkyScan query 13:12:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:12:38 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:12:38 Message to Master queued w/err=0: serial=278043 error=0 13:12:43 Received message from Master: op=Filter serial=278044 13:12:43 Color wheel filter change from 0 to 0 13:12:43 FLIGetFilterPos err=0 currentPosition=0 13:12:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:43 Filter is already there-color wheel unchanged 13:12:44 Received message from Master: op=Shutter serial=278045 13:12:44 Shutter LASER close 13:12:44 Received message from Camera: op=State serial=278047 13:12:44 GetSingleValue result=40 Value=cccccccc 13:12:44 SkyScan query 13:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:12:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:44 Parameters OK 13:12:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:44 Set A/D data flow result=40 13:12:44 Set A/D channel type result=40 13:12:44 Set A/D encoding result=40 13:12:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:44 Set channel filter=0.000000e+000 result=40 13:12:44 Config A/D Result=40 13:12:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:44 Get A/D filter: -9.255963e+061 result=40 13:12:44 Get A/D value=-858993460 result=40 13:12:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:44 Parameters OK 13:12:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:44 Set A/D data flow result=40 13:12:44 Set A/D channel type result=40 13:12:44 Set A/D encoding result=40 13:12:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:44 Set channel filter=0.000000e+000 result=40 13:12:44 Config A/D Result=40 13:12:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:44 Get A/D filter: -9.255963e+061 result=40 13:12:44 Get A/D value=-858993460 result=40 13:12:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:44 Aux= 13:12:44 Message to Camera, serial 278047 queued 13:13:21 Received message from Master: op=PointingHead serial=278060 13:13:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:13:21 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:13:22 Point started: ret=0 13:13:22 point_skyscan result=0 13:13:22 Check angles 13:13:22 SkyScan query 13:13:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:23 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:13:23 Message to Master queued w/err=0: serial=278060 error=0 13:13:28 Received message from Master: op=Filter serial=278061 13:13:28 Color wheel filter change from 0 to 0 13:13:28 FLIGetFilterPos err=0 currentPosition=0 13:13:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:28 Filter is already there-color wheel unchanged 13:13:28 Received message from Master: op=Shutter serial=278062 13:13:28 Shutter LASER close 13:13:28 Received message from Camera: op=State serial=278064 13:13:28 GetSingleValue result=40 Value=cccccccc 13:13:28 SkyScan query 13:13:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:13:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:29 Parameters OK 13:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:29 Set A/D data flow result=40 13:13:29 Set A/D channel type result=40 13:13:29 Set A/D encoding result=40 13:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:29 Set channel filter=0.000000e+000 result=40 13:13:29 Config A/D Result=40 13:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:29 Get A/D filter: -9.255963e+061 result=40 13:13:29 Get A/D value=-858993460 result=40 13:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:29 Parameters OK 13:13:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:29 Set A/D data flow result=40 13:13:29 Set A/D channel type result=40 13:13:29 Set A/D encoding result=40 13:13:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:29 Set channel filter=0.000000e+000 result=40 13:13:29 Config A/D Result=40 13:13:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:29 Get A/D filter: -9.255963e+061 result=40 13:13:29 Get A/D value=-858993460 result=40 13:13:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:29 Aux= 13:13:29 Message to Camera, serial 278064 queued 13:14:06 Received message from Master: op=PointingHead serial=278077 13:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:06 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:06 Point started: ret=0 13:14:06 point_skyscan result=0 13:14:07 Check angles 13:14:07 SkyScan query 13:14:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:07 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:07 Message to Master queued w/err=0: serial=278077 error=0 13:14:12 Received message from Master: op=Filter serial=278078 13:14:12 Color wheel filter change from 0 to 0 13:14:12 FLIGetFilterPos err=0 currentPosition=0 13:14:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:12 Filter is already there-color wheel unchanged [UTC 2019-3-14 13:14:12] 13:14:12 Received message from Master: op=Shutter serial=278079 13:14:12 Shutter LASER close 13:14:12 Received message from Camera: op=State serial=278081 13:14:12 GetSingleValue result=40 Value=cccccccc 13:14:12 SkyScan query 13:14:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:13 Parameters OK 13:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:13 Set A/D data flow result=40 13:14:13 Set A/D channel type result=40 13:14:13 Set A/D encoding result=40 13:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:13 Set channel filter=0.000000e+000 result=40 13:14:13 Config A/D Result=40 13:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:13 Get A/D filter: -9.255963e+061 result=40 13:14:13 Get A/D value=-858993460 result=40 13:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:13 Parameters OK 13:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:13 Set A/D data flow result=40 13:14:13 Set A/D channel type result=40 13:14:13 Set A/D encoding result=40 13:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:13 Set channel filter=0.000000e+000 result=40 13:14:13 Config A/D Result=40 13:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:13 Get A/D filter: -9.255963e+061 result=40 13:14:13 Get A/D value=-858993460 result=40 13:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:13 Aux= 13:14:13 Message to Camera, serial 278081 queued 13:14:50 Received message from Master: op=PointingHead serial=278094 13:14:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:14:50 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:14:50 Point started: ret=0 13:14:50 point_skyscan result=0 13:14:51 Check angles 13:14:51 SkyScan query 13:14:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:51 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:14:51 Message to Master queued w/err=0: serial=278094 error=0 13:14:56 Received message from Master: op=Filter serial=278095 13:14:56 Color wheel filter change from 0 to 0 13:14:56 FLIGetFilterPos err=0 currentPosition=0 13:14:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:56 Filter is already there-color wheel unchanged 13:14:57 Received message from Master: op=Shutter serial=278096 13:14:57 Shutter LASER close 13:14:57 Received message from Camera: op=State serial=278098 13:14:57 GetSingleValue result=40 Value=cccccccc 13:14:57 SkyScan query 13:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:57 Parameters OK 13:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:57 Set A/D data flow result=40 13:14:57 Set A/D channel type result=40 13:14:57 Set A/D encoding result=40 13:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:57 Set channel filter=0.000000e+000 result=40 13:14:57 Config A/D Result=40 13:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:57 Get A/D filter: -9.255963e+061 result=40 13:14:57 Get A/D value=-858993460 result=40 13:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:57 Parameters OK 13:14:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:57 Set A/D data flow result=40 13:14:57 Set A/D channel type result=40 13:14:57 Set A/D encoding result=40 13:14:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:57 Set channel filter=0.000000e+000 result=40 13:14:57 Config A/D Result=40 13:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:57 Get A/D filter: -9.255963e+061 result=40 13:14:57 Get A/D value=-858993460 result=40 13:14:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:57 Aux= 13:14:57 Message to Camera, serial 278098 queued 13:15:34 Received message from Master: op=PointingHead serial=278111 13:15:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:15:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:15:34 Point started: ret=0 13:15:34 point_skyscan result=0 13:15:35 Check angles 13:15:35 SkyScan query 13:15:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.1<-13540 Statuses=0008 0009 13:15:36 Msec=0 True Az=112.995 Ze=-23.1 Az status=0008 Ze status=0009 13:15:36 Check angles 13:15:36 SkyScan query 13:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.085<-14939 Statuses=0008 0009 13:15:37 Msec=750 True Az=112.995 Ze=-44.085 Az status=0008 Ze status=0009 13:15:37 Check angles 13:15:37 SkyScan query 13:15:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.415<-16361 Statuses=0008 0009 13:15:37 Msec=1500 True Az=112.995 Ze=-65.415 Az status=0008 Ze status=0009 13:15:38 Check angles 13:15:38 SkyScan query 13:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.37<-17758 Statuses=0008 0009 13:15:38 Msec=2250 True Az=112.995 Ze=-86.37 Az status=0008 Ze status=0009 13:15:38 Check angles 13:15:38 SkyScan query 13:15:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.79<-19186 Statuses=0008 0009 13:15:39 Msec=3000 True Az=112.995 Ze=-107.79 Az status=0008 Ze status=0009 13:15:39 Check angles 13:15:39 SkyScan query 13:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.745<-20583 Statuses=0008 0009 13:15:40 Msec=3750 True Az=112.995 Ze=-128.745 Az status=0008 Ze status=0009 13:15:40 Check angles 13:15:40 SkyScan query 13:15:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.7<-21980 Statuses=0008 0009 13:15:40 Msec=4500 True Az=112.995 Ze=-149.7 Az status=0008 Ze status=0009 13:15:41 Check angles 13:15:41 SkyScan query 13:15:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.97<-23398 Statuses=0008 0009 13:15:41 Msec=5250 True Az=112.995 Ze=-170.97 Az status=0008 Ze status=0009 13:15:41 Check angles 13:15:41 SkyScan query 13:15:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:15:42 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:15:42 Message to Master queued w/err=0: serial=278111 error=0 13:15:47 Received message from Master: op=Filter serial=278112 13:15:47 Color wheel filter change from 0 to 0 13:15:47 FLIGetFilterPos err=0 currentPosition=0 13:15:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:47 Filter is already there-color wheel unchanged 13:15:47 Received message from Master: op=Shutter serial=278113 13:15:47 Shutter LASER open 13:15:47 Received message from Camera: op=State serial=278115 13:15:47 GetSingleValue result=40 Value=cccccccc 13:15:47 SkyScan query 13:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:15:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:48 Parameters OK 13:15:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:48 Set A/D data flow result=40 13:15:48 Set A/D channel type result=40 13:15:48 Set A/D encoding result=40 13:15:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:48 Set channel filter=0.000000e+000 result=40 13:15:48 Config A/D Result=40 13:15:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:48 Get A/D filter: -9.255963e+061 result=40 13:15:48 Get A/D value=-858993460 result=40 13:15:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:48 Parameters OK 13:15:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:48 Set A/D data flow result=40 13:15:48 Set A/D channel type result=40 13:15:48 Set A/D encoding result=40 13:15:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:48 Set channel filter=0.000000e+000 result=40 13:15:48 Config A/D Result=40 13:15:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:48 Get A/D filter: -9.255963e+061 result=40 13:15:48 Get A/D value=-858993460 result=40 13:15:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:48 Aux= 13:15:48 Message to Camera, serial 278115 queued 13:15:56 Received message from Master: op=Shutter serial=278125 13:15:56 Shutter LASER close 13:15:57 Received message from Master: op=PointingHead serial=278129 13:15:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:15:57 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:15:57 Point started: ret=0 13:15:57 point_skyscan result=0 13:15:58 Check angles 13:15:58 SkyScan query 13:15:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.55<-21570 Statuses=0008 0009 13:15:58 Msec=0 True Az=112.995 Ze=-143.55 Az status=0008 Ze status=0009 13:15:59 Check angles 13:15:59 SkyScan query 13:15:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.595<-20173 Statuses=0008 0009 13:15:59 Msec=750 True Az=112.995 Ze=-122.595 Az status=0008 Ze status=0009 13:15:59 Check angles 13:15:59 SkyScan query 13:16:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.625<-18775 Statuses=0008 0009 13:16:00 Msec=1500 True Az=112.995 Ze=-101.625 Az status=0008 Ze status=0009 13:16:00 Check angles 13:16:00 SkyScan query 13:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.67<-17378 Statuses=0008 0009 13:16:01 Msec=2250 True Az=112.995 Ze=-80.67 Az status=0008 Ze status=0009 13:16:01 Check angles 13:16:01 SkyScan query 13:16:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.745<-15983 Statuses=0008 0009 13:16:01 Msec=3000 True Az=112.995 Ze=-59.745 Az status=0008 Ze status=0009 13:16:02 Check angles 13:16:02 SkyScan query 13:16:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.775<-14585 Statuses=0008 0009 13:16:02 Msec=3750 True Az=112.995 Ze=-38.775 Az status=0008 Ze status=0009 13:16:02 Check angles 13:16:02 SkyScan query 13:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.805<-13187 Statuses=0008 0009 13:16:03 Msec=4500 True Az=112.995 Ze=-17.805 Az status=0008 Ze status=0009 13:16:03 Check angles 13:16:03 SkyScan query 13:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=3.15<-11790 Statuses=0008 0009 13:16:04 Msec=5250 True Az=112.995 Ze=3.15 Az status=0008 Ze status=0009 13:16:04 Check angles 13:16:04 SkyScan query 13:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:16:04 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:16:04 Message to Master queued w/err=0: serial=278129 error=0 13:16:09 Received message from Master: op=Filter serial=278130 13:16:09 Color wheel filter change from 0 to 0 13:16:09 FLIGetFilterPos err=0 currentPosition=0 13:16:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:09 Filter is already there-color wheel unchanged 13:16:10 Received message from Master: op=Shutter serial=278131 13:16:10 Shutter LASER close 13:16:10 Received message from Camera: op=State serial=278133 13:16:10 GetSingleValue result=40 Value=cccccccc 13:16:10 SkyScan query 13:16:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:10 Parameters OK 13:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:10 Set A/D data flow result=40 13:16:10 Set A/D channel type result=40 13:16:10 Set A/D encoding result=40 13:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:10 Set channel filter=0.000000e+000 result=40 13:16:10 Config A/D Result=40 13:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:10 Get A/D filter: -9.255963e+061 result=40 13:16:10 Get A/D value=-858993460 result=40 13:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:10 Parameters OK 13:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:10 Set A/D data flow result=40 13:16:10 Set A/D channel type result=40 13:16:10 Set A/D encoding result=40 13:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:10 Set channel filter=0.000000e+000 result=40 13:16:10 Config A/D Result=40 13:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:10 Get A/D filter: -9.255963e+061 result=40 13:16:10 Get A/D value=-858993460 result=40 13:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:10 Aux= 13:16:10 Message to Camera, serial 278133 queued 13:16:47 Received message from Master: op=PointingHead serial=278146 13:16:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:16:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:16:48 Point started: ret=0 13:16:48 point_skyscan result=0 13:16:48 Check angles 13:16:48 SkyScan query 13:16:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:49 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:16:49 Message to Master queued w/err=0: serial=278146 error=0 13:16:54 Received message from Master: op=Filter serial=278147 13:16:54 Color wheel filter change from 0 to 0 13:16:54 FLIGetFilterPos err=0 currentPosition=0 13:16:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:54 Filter is already there-color wheel unchanged 13:16:54 Received message from Master: op=Shutter serial=278148 13:16:54 Shutter LASER close 13:16:54 Received message from Camera: op=State serial=278150 13:16:54 GetSingleValue result=40 Value=cccccccc 13:16:54 SkyScan query 13:16:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:16:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:55 Parameters OK 13:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:55 Set A/D data flow result=40 13:16:55 Set A/D channel type result=40 13:16:55 Set A/D encoding result=40 13:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:55 Set channel filter=0.000000e+000 result=40 13:16:55 Config A/D Result=40 13:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:55 Get A/D filter: -9.255963e+061 result=40 13:16:55 Get A/D value=-858993460 result=40 13:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:55 Parameters OK 13:16:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:55 Set A/D data flow result=40 13:16:55 Set A/D channel type result=40 13:16:55 Set A/D encoding result=40 13:16:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:55 Set channel filter=0.000000e+000 result=40 13:16:55 Config A/D Result=40 13:16:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:55 Get A/D filter: -9.255963e+061 result=40 13:16:55 Get A/D value=-858993460 result=40 13:16:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:55 Aux= 13:16:55 Message to Camera, serial 278150 queued 13:17:32 Received message from Master: op=PointingHead serial=278163 13:17:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:17:32 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:17:32 Point started: ret=0 13:17:32 point_skyscan result=0 13:17:33 Check angles 13:17:33 SkyScan query 13:17:33 SkyScan query done: ret=0 az=136.08<-9072 ze=-6.51<-12434 Statuses=0009 0008 13:17:33 Msec=0 True Az=136.08 Ze=-6.51 Az status=0009 Ze status=0008 13:17:33 Check angles 13:17:33 SkyScan query 13:17:34 SkyScan query done: ret=0 az=153.435<-10229 ze=-6.495<-12433 Statuses=0009 0008 13:17:34 Msec=750 True Az=153.435 Ze=-6.495 Az status=0009 Ze status=0008 13:17:34 Check angles 13:17:34 SkyScan query 13:17:35 SkyScan query done: ret=0 az=171.285<-11419 ze=-6.495<-12433 Statuses=0009 0008 13:17:35 Msec=1500 True Az=171.285 Ze=-6.495 Az status=0009 Ze status=0008 13:17:35 Check angles 13:17:35 SkyScan query 13:17:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 13:17:36 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 13:17:36 Message to Master queued w/err=0: serial=278163 error=0 13:17:41 Received message from Master: op=Filter serial=278164 13:17:41 Color wheel filter change from 0 to 0 13:17:41 FLIGetFilterPos err=0 currentPosition=0 13:17:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:41 Filter is already there-color wheel unchanged 13:17:41 Received message from Master: op=Shutter serial=278165 13:17:41 Shutter LASER close 13:17:41 Received message from Camera: op=State serial=278167 13:17:41 GetSingleValue result=40 Value=cccccccc 13:17:41 SkyScan query 13:17:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:17:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:41 Parameters OK 13:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:41 Set A/D data flow result=40 13:17:41 Set A/D channel type result=40 13:17:41 Set A/D encoding result=40 13:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:41 Set channel filter=0.000000e+000 result=40 13:17:41 Config A/D Result=40 13:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:41 Get A/D filter: -9.255963e+061 result=40 13:17:41 Get A/D value=-858993460 result=40 13:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:41 Parameters OK 13:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:41 Set A/D data flow result=40 13:17:41 Set A/D channel type result=40 13:17:41 Set A/D encoding result=40 13:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:41 Set channel filter=0.000000e+000 result=40 13:17:41 Config A/D Result=40 13:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:41 Get A/D filter: -9.255963e+061 result=40 13:17:41 Get A/D value=-858993460 result=40 13:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:41 Aux= 13:17:41 Message to Camera, serial 278167 queued 13:18:18 Received message from Master: op=PointingHead serial=278180 13:18:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:18:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:18:19 Point started: ret=0 13:18:19 point_skyscan result=0 13:18:19 Check angles 13:18:19 SkyScan query 13:18:20 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 13:18:20 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 13:18:20 Check angles 13:18:20 SkyScan query 13:18:21 SkyScan query done: ret=0 az=135.555<-9037 ze=6.495<-11567 Statuses=0009 0008 13:18:21 Msec=750 True Az=135.555 Ze=6.495 Az status=0009 Ze status=0008 13:18:21 Check angles 13:18:21 SkyScan query 13:18:21 SkyScan query done: ret=0 az=117.96<-7864 ze=6.495<-11567 Statuses=0009 0008 13:18:21 Msec=1500 True Az=117.96 Ze=6.495 Az status=0009 Ze status=0008 13:18:22 Check angles 13:18:22 SkyScan query 13:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:22 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:18:22 Message to Master queued w/err=0: serial=278180 error=0 13:18:27 Received message from Master: op=Filter serial=278181 13:18:27 Color wheel filter change from 0 to 0 13:18:27 FLIGetFilterPos err=0 currentPosition=0 13:18:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:27 Filter is already there-color wheel unchanged 13:18:27 Received message from Master: op=Shutter serial=278182 13:18:27 Shutter LASER close 13:18:27 Received message from Camera: op=State serial=278184 13:18:27 GetSingleValue result=40 Value=cccccccc 13:18:27 SkyScan query 13:18:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:18:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:28 Parameters OK 13:18:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:28 Set A/D data flow result=40 13:18:28 Set A/D channel type result=40 13:18:28 Set A/D encoding result=40 13:18:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:28 Set channel filter=0.000000e+000 result=40 13:18:28 Config A/D Result=40 13:18:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:28 Get A/D filter: -9.255963e+061 result=40 13:18:28 Get A/D value=-858993460 result=40 13:18:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:28 Parameters OK 13:18:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:28 Set A/D data flow result=40 13:18:28 Set A/D channel type result=40 13:18:28 Set A/D encoding result=40 13:18:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:28 Set channel filter=0.000000e+000 result=40 13:18:28 Config A/D Result=40 13:18:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:28 Get A/D filter: -9.255963e+061 result=40 13:18:28 Get A/D value=-858993460 result=40 13:18:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:28 Aux= 13:18:28 Message to Camera, serial 278184 queued 13:19:05 Received message from Master: op=PointingHead serial=278197 13:19:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:19:05 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:19:05 Point started: ret=0 13:19:05 point_skyscan result=0 13:19:06 Check angles 13:19:06 SkyScan query 13:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.61<-13574 Statuses=0008 0009 13:19:06 Msec=0 True Az=112.995 Ze=-23.61 Az status=0008 Ze status=0009 13:19:07 Check angles 13:19:07 SkyScan query 13:19:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.55<-14970 Statuses=0008 0009 13:19:07 Msec=750 True Az=112.995 Ze=-44.55 Az status=0008 Ze status=0009 13:19:07 Check angles 13:19:07 SkyScan query 13:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 13:19:08 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 13:19:08 Check angles 13:19:08 SkyScan query 13:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 13:19:09 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 13:19:09 Check angles 13:19:09 SkyScan query 13:19:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.445<-19163 Statuses=0008 0009 13:19:09 Msec=3000 True Az=112.995 Ze=-107.445 Az status=0008 Ze status=0009 13:19:10 Check angles 13:19:10 SkyScan query 13:19:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.385<-20559 Statuses=0008 0009 13:19:10 Msec=3750 True Az=112.995 Ze=-128.385 Az status=0008 Ze status=0009 13:19:10 Check angles 13:19:10 SkyScan query 13:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.385<-21959 Statuses=0008 0009 13:19:11 Msec=4500 True Az=112.995 Ze=-149.385 Az status=0008 Ze status=0009 13:19:11 Check angles 13:19:11 SkyScan query 13:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.325<-23355 Statuses=0008 0009 13:19:12 Msec=5250 True Az=112.995 Ze=-170.325 Az status=0008 Ze status=0009 13:19:12 Check angles 13:19:12 SkyScan query 13:19:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:19:12 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:19:12 Message to Master queued w/err=0: serial=278197 error=0 13:19:17 Received message from Master: op=Filter serial=278198 13:19:17 Color wheel filter change from 0 to 0 13:19:17 FLIGetFilterPos err=0 currentPosition=0 13:19:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:17 Filter is already there-color wheel unchanged 13:19:18 Received message from Master: op=Shutter serial=278199 13:19:18 Shutter LASER open 13:19:18 Received message from Camera: op=State serial=278201 13:19:18 GetSingleValue result=40 Value=cccccccc 13:19:18 SkyScan query 13:19:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:19:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:18 Parameters OK 13:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:18 Set A/D data flow result=40 13:19:18 Set A/D channel type result=40 13:19:18 Set A/D encoding result=40 13:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:18 Set channel filter=0.000000e+000 result=40 13:19:18 Config A/D Result=40 13:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:18 Get A/D filter: -9.255963e+061 result=40 13:19:18 Get A/D value=-858993460 result=40 13:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:18 Parameters OK 13:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:18 Set A/D data flow result=40 13:19:18 Set A/D channel type result=40 13:19:18 Set A/D encoding result=40 13:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:18 Set channel filter=0.000000e+000 result=40 13:19:18 Config A/D Result=40 13:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:18 Get A/D filter: -9.255963e+061 result=40 13:19:18 Get A/D value=-858993460 result=40 13:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:18 Aux= 13:19:18 Message to Camera, serial 278201 queued 13:19:27 Received message from Master: op=Shutter serial=278211 13:19:27 Shutter LASER close 13:19:27 Received message from Master: op=PointingHead serial=278215 13:19:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:19:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:19:28 Point started: ret=0 13:19:28 point_skyscan result=0 13:19:28 Check angles 13:19:28 SkyScan query 13:19:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 13:19:29 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 13:19:29 Check angles 13:19:29 SkyScan query 13:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.515<-20101 Statuses=0008 0009 13:19:30 Msec=750 True Az=112.995 Ze=-121.515 Az status=0008 Ze status=0009 13:19:30 Check angles 13:19:30 SkyScan query 13:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.455<-18697 Statuses=0008 0009 13:19:30 Msec=1500 True Az=112.995 Ze=-100.455 Az status=0008 Ze status=0009 13:19:31 Check angles 13:19:31 SkyScan query 13:19:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.59<-17306 Statuses=0008 0009 13:19:31 Msec=2250 True Az=112.995 Ze=-79.59 Az status=0008 Ze status=0009 13:19:31 Check angles 13:19:31 SkyScan query 13:19:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 13:19:32 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 13:19:32 Check angles 13:19:32 SkyScan query 13:19:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.29<-14486 Statuses=0008 0009 13:19:33 Msec=3750 True Az=112.995 Ze=-37.29 Az status=0008 Ze status=0009 13:19:33 Check angles 13:19:33 SkyScan query 13:19:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.9<-13060 Statuses=0008 0009 13:19:33 Msec=4500 True Az=112.995 Ze=-15.9 Az status=0008 Ze status=0009 13:19:34 Check angles 13:19:34 SkyScan query 13:19:34 SkyScan query done: ret=0 az=112.98<-7532 ze=5.16<-11656 Statuses=0008 0009 13:19:34 Msec=5250 True Az=112.98 Ze=5.16 Az status=0008 Ze status=0009 13:19:34 Check angles 13:19:34 SkyScan query 13:19:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:19:35 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:19:35 Message to Master queued w/err=0: serial=278215 error=0 13:19:40 Received message from Master: op=Filter serial=278216 13:19:40 Color wheel filter change from 0 to 0 13:19:40 FLIGetFilterPos err=0 currentPosition=0 13:19:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:40 Filter is already there-color wheel unchanged 13:19:40 Received message from Master: op=Shutter serial=278217 13:19:40 Shutter LASER close 13:19:40 Received message from Camera: op=State serial=278219 13:19:40 GetSingleValue result=40 Value=cccccccc 13:19:40 SkyScan query 13:19:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:19:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:41 Parameters OK 13:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:41 Set A/D data flow result=40 13:19:41 Set A/D channel type result=40 13:19:41 Set A/D encoding result=40 13:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:41 Set channel filter=0.000000e+000 result=40 13:19:41 Config A/D Result=40 13:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:41 Get A/D filter: -9.255963e+061 result=40 13:19:41 Get A/D value=-858993460 result=40 13:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:41 Parameters OK 13:19:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:41 Set A/D data flow result=40 13:19:41 Set A/D channel type result=40 13:19:41 Set A/D encoding result=40 13:19:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:41 Set channel filter=0.000000e+000 result=40 13:19:41 Config A/D Result=40 13:19:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:41 Get A/D filter: -9.255963e+061 result=40 13:19:41 Get A/D value=-858993460 result=40 13:19:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:41 Aux= 13:19:41 Message to Camera, serial 278219 queued 13:20:17 Received message from Master: op=PointingHead serial=278231 13:20:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:20:17 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:20:17 Point started: ret=0 13:20:17 point_skyscan result=0 13:20:18 Check angles 13:20:18 SkyScan query 13:20:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:18 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:20:18 Message to Master queued w/err=0: serial=278231 error=0 13:20:23 Received message from Master: op=Filter serial=278232 13:20:23 Color wheel filter change from 0 to 0 13:20:23 FLIGetFilterPos err=0 currentPosition=0 13:20:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:23 Filter is already there-color wheel unchanged 13:20:24 Received message from Master: op=Shutter serial=278233 13:20:24 Shutter LASER close 13:20:24 Received message from Camera: op=State serial=278235 13:20:24 GetSingleValue result=40 Value=cccccccc 13:20:24 SkyScan query 13:20:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:20:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:24 Parameters OK 13:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:24 Set A/D data flow result=40 13:20:24 Set A/D channel type result=40 13:20:24 Set A/D encoding result=40 13:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:24 Set channel filter=0.000000e+000 result=40 13:20:24 Config A/D Result=40 13:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:24 Get A/D filter: -9.255963e+061 result=40 13:20:24 Get A/D value=-858993460 result=40 13:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:24 Parameters OK 13:20:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:24 Set A/D data flow result=40 13:20:24 Set A/D channel type result=40 13:20:24 Set A/D encoding result=40 13:20:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:24 Set channel filter=0.000000e+000 result=40 13:20:24 Config A/D Result=40 13:20:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:24 Get A/D filter: -9.255963e+061 result=40 13:20:24 Get A/D value=-858993460 result=40 13:20:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:24 Aux= 13:20:24 Message to Camera, serial 278235 queued 13:21:01 Received message from Master: op=PointingHead serial=278248 13:21:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:21:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:01 Point started: ret=0 13:21:01 point_skyscan result=0 13:21:02 Check angles 13:21:02 SkyScan query 13:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:03 Message to Master queued w/err=0: serial=278248 error=0 13:21:08 Received message from Master: op=Filter serial=278249 13:21:08 Color wheel filter change from 0 to 0 13:21:08 FLIGetFilterPos err=0 currentPosition=0 13:21:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:08 Filter is already there-color wheel unchanged 13:21:08 Received message from Master: op=Shutter serial=278250 13:21:08 Shutter LASER close 13:21:08 Received message from Camera: op=State serial=278252 13:21:08 GetSingleValue result=40 Value=cccccccc 13:21:08 SkyScan query 13:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:09 Parameters OK 13:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:09 Set A/D data flow result=40 13:21:09 Set A/D channel type result=40 13:21:09 Set A/D encoding result=40 13:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:09 Set channel filter=0.000000e+000 result=40 13:21:09 Config A/D Result=40 13:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:09 Get A/D filter: -9.255963e+061 result=40 13:21:09 Get A/D value=-858993460 result=40 13:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:09 Parameters OK 13:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:09 Set A/D data flow result=40 13:21:09 Set A/D channel type result=40 13:21:09 Set A/D encoding result=40 13:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:09 Set channel filter=0.000000e+000 result=40 13:21:09 Config A/D Result=40 13:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:09 Get A/D filter: -9.255963e+061 result=40 13:21:09 Get A/D value=-858993460 result=40 13:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:09 Aux= 13:21:09 Message to Camera, serial 278252 queued 13:21:45 Received message from Master: op=PointingHead serial=278265 13:21:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:21:45 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:21:46 Point started: ret=0 13:21:46 point_skyscan result=0 13:21:46 Check angles 13:21:46 SkyScan query 13:21:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:47 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:21:47 Message to Master queued w/err=0: serial=278265 error=0 13:21:52 Received message from Master: op=Filter serial=278266 13:21:52 Color wheel filter change from 0 to 0 13:21:52 FLIGetFilterPos err=0 currentPosition=0 13:21:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:52 Filter is already there-color wheel unchanged 13:21:52 Received message from Master: op=Shutter serial=278267 13:21:52 Shutter LASER close 13:21:52 Received message from Camera: op=State serial=278269 13:21:52 GetSingleValue result=40 Value=cccccccc 13:21:52 SkyScan query 13:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:21:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:53 Parameters OK 13:21:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:53 Set A/D data flow result=40 13:21:53 Set A/D channel type result=40 13:21:53 Set A/D encoding result=40 13:21:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:53 Set channel filter=0.000000e+000 result=40 13:21:53 Config A/D Result=40 13:21:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:53 Get A/D filter: -9.255963e+061 result=40 13:21:53 Get A/D value=-858993460 result=40 13:21:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:53 Parameters OK 13:21:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:53 Set A/D data flow result=40 13:21:53 Set A/D channel type result=40 13:21:53 Set A/D encoding result=40 13:21:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:53 Set channel filter=0.000000e+000 result=40 13:21:53 Config A/D Result=40 13:21:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:53 Get A/D filter: -9.255963e+061 result=40 13:21:53 Get A/D value=-858993460 result=40 13:21:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:53 Aux= 13:21:53 Message to Camera, serial 278269 queued 13:22:30 Received message from Master: op=PointingHead serial=278282 13:22:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:22:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:22:30 Point started: ret=0 13:22:30 point_skyscan result=0 13:22:31 Check angles 13:22:31 SkyScan query 13:22:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 13:22:31 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 13:22:32 Check angles 13:22:32 SkyScan query 13:22:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.25<-14950 Statuses=0008 0009 13:22:32 Msec=750 True Az=112.995 Ze=-44.25 Az status=0008 Ze status=0009 13:22:32 Check angles 13:22:32 SkyScan query 13:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.175<-16345 Statuses=0008 0009 13:22:33 Msec=1500 True Az=112.995 Ze=-65.175 Az status=0008 Ze status=0009 13:22:33 Check angles 13:22:33 SkyScan query 13:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.55<-17770 Statuses=0008 0009 13:22:34 Msec=2250 True Az=112.995 Ze=-86.55 Az status=0008 Ze status=0009 13:22:34 Check angles 13:22:34 SkyScan query 13:22:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.52<-19168 Statuses=0008 0009 13:22:34 Msec=3000 True Az=112.995 Ze=-107.52 Az status=0008 Ze status=0009 13:22:35 Check angles 13:22:35 SkyScan query 13:22:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.46<-20564 Statuses=0008 0009 13:22:35 Msec=3750 True Az=112.995 Ze=-128.46 Az status=0008 Ze status=0009 13:22:35 Check angles 13:22:35 SkyScan query 13:22:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.46<-21964 Statuses=0008 0009 13:22:36 Msec=4500 True Az=112.995 Ze=-149.46 Az status=0008 Ze status=0009 13:22:36 Check angles 13:22:36 SkyScan query 13:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.775<-23385 Statuses=0008 0009 13:22:37 Msec=5250 True Az=112.995 Ze=-170.775 Az status=0008 Ze status=0009 13:22:37 Check angles 13:22:37 SkyScan query 13:22:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:22:37 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:22:37 Message to Master queued w/err=0: serial=278282 error=0 13:22:42 Received message from Master: op=Filter serial=278283 13:22:42 Color wheel filter change from 0 to 0 13:22:42 FLIGetFilterPos err=0 currentPosition=0 13:22:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:42 Filter is already there-color wheel unchanged 13:22:43 Received message from Master: op=Shutter serial=278284 13:22:43 Shutter LASER open 13:22:43 Received message from Camera: op=State serial=278286 13:22:43 GetSingleValue result=40 Value=cccccccc 13:22:43 SkyScan query 13:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:22:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:43 Parameters OK 13:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:43 Set A/D data flow result=40 13:22:43 Set A/D channel type result=40 13:22:43 Set A/D encoding result=40 13:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:43 Set channel filter=0.000000e+000 result=40 13:22:43 Config A/D Result=40 13:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:43 Get A/D filter: -9.255963e+061 result=40 13:22:43 Get A/D value=-858993460 result=40 13:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:43 Parameters OK 13:22:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:43 Set A/D data flow result=40 13:22:43 Set A/D channel type result=40 13:22:43 Set A/D encoding result=40 13:22:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:43 Set channel filter=0.000000e+000 result=40 13:22:43 Config A/D Result=40 13:22:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:43 Get A/D filter: -9.255963e+061 result=40 13:22:43 Get A/D value=-858993460 result=40 13:22:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:43 Aux= 13:22:43 Message to Camera, serial 278286 queued 13:22:52 Received message from Master: op=Shutter serial=278296 13:22:52 Shutter LASER close 13:22:52 Received message from Master: op=PointingHead serial=278300 13:22:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:22:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:22:53 Point started: ret=0 13:22:53 point_skyscan result=0 13:22:53 Check angles 13:22:53 SkyScan query 13:22:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 13:22:54 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 13:22:54 Check angles 13:22:54 SkyScan query 13:22:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 13:22:55 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 13:22:55 Check angles 13:22:55 SkyScan query 13:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.8<-18720 Statuses=0008 0009 13:22:56 Msec=1500 True Az=112.995 Ze=-100.8 Az status=0008 Ze status=0009 13:22:56 Check angles 13:22:56 SkyScan query 13:22:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.365<-17291 Statuses=0008 0009 13:22:56 Msec=2250 True Az=112.995 Ze=-79.365 Az status=0008 Ze status=0009 13:22:57 Check angles 13:22:57 SkyScan query 13:22:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 13:22:57 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 13:22:57 Check angles 13:22:57 SkyScan query 13:22:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.485<-14499 Statuses=0008 0009 13:22:58 Msec=3750 True Az=112.995 Ze=-37.485 Az status=0008 Ze status=0009 13:22:58 Check angles 13:22:58 SkyScan query 13:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.095<-13073 Statuses=0008 0009 13:22:59 Msec=4500 True Az=112.995 Ze=-16.095 Az status=0008 Ze status=0009 13:22:59 Check angles 13:22:59 SkyScan query 13:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 13:22:59 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 13:23:00 Check angles 13:23:00 SkyScan query 13:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:23:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:23:00 Message to Master queued w/err=0: serial=278300 error=0 13:23:05 Received message from Master: op=Filter serial=278301 13:23:05 Color wheel filter change from 0 to 0 13:23:05 FLIGetFilterPos err=0 currentPosition=0 13:23:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:05 Filter is already there-color wheel unchanged 13:23:05 Received message from Master: op=Shutter serial=278302 13:23:05 Shutter LASER close 13:23:05 Received message from Camera: op=State serial=278304 13:23:05 GetSingleValue result=40 Value=cccccccc 13:23:05 SkyScan query 13:23:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:06 Parameters OK 13:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:06 Set A/D data flow result=40 13:23:06 Set A/D channel type result=40 13:23:06 Set A/D encoding result=40 13:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:06 Set channel filter=0.000000e+000 result=40 13:23:06 Config A/D Result=40 13:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:06 Get A/D filter: -9.255963e+061 result=40 13:23:06 Get A/D value=-858993460 result=40 13:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:06 Parameters OK 13:23:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:06 Set A/D data flow result=40 13:23:06 Set A/D channel type result=40 13:23:06 Set A/D encoding result=40 13:23:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:06 Set channel filter=0.000000e+000 result=40 13:23:06 Config A/D Result=40 13:23:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:06 Get A/D filter: -9.255963e+061 result=40 13:23:06 Get A/D value=-858993460 result=40 13:23:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:06 Aux= 13:23:06 Message to Camera, serial 278304 queued 13:23:43 Received message from Master: op=PointingHead serial=278317 13:23:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:23:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:23:43 Point started: ret=0 13:23:43 point_skyscan result=0 13:23:44 Check angles 13:23:44 SkyScan query 13:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:23:44 Message to Master queued w/err=0: serial=278317 error=0 [UTC 2019-3-14 13:23:48] 13:23:49 Received message from Master: op=Filter serial=278318 13:23:49 Color wheel filter change from 0 to 0 13:23:49 FLIGetFilterPos err=0 currentPosition=0 13:23:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:49 Filter is already there-color wheel unchanged 13:23:50 Received message from Master: op=Shutter serial=278319 13:23:50 Shutter LASER close 13:23:50 Received message from Camera: op=State serial=278321 13:23:50 GetSingleValue result=40 Value=cccccccc 13:23:50 SkyScan query 13:23:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:23:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:50 Parameters OK 13:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:50 Set A/D data flow result=40 13:23:50 Set A/D channel type result=40 13:23:50 Set A/D encoding result=40 13:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:50 Set channel filter=0.000000e+000 result=40 13:23:50 Config A/D Result=40 13:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:50 Get A/D filter: -9.255963e+061 result=40 13:23:50 Get A/D value=-858993460 result=40 13:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:50 Parameters OK 13:23:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:50 Set A/D data flow result=40 13:23:50 Set A/D channel type result=40 13:23:50 Set A/D encoding result=40 13:23:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:50 Set channel filter=0.000000e+000 result=40 13:23:50 Config A/D Result=40 13:23:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:50 Get A/D filter: -9.255963e+061 result=40 13:23:50 Get A/D value=-858993460 result=40 13:23:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:50 Aux= 13:23:50 Message to Camera, serial 278321 queued 13:24:27 Received message from Master: op=PointingHead serial=278334 13:24:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:24:27 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:24:27 Point started: ret=0 13:24:27 point_skyscan result=0 13:24:28 Check angles 13:24:28 SkyScan query 13:24:29 SkyScan query done: ret=0 az=136.095<-9073 ze=-6.51<-12434 Statuses=0009 0008 13:24:29 Msec=0 True Az=136.095 Ze=-6.51 Az status=0009 Ze status=0008 13:24:29 Check angles 13:24:29 SkyScan query 13:24:30 SkyScan query done: ret=0 az=153.93<-10262 ze=-6.495<-12433 Statuses=0009 0008 13:24:30 Msec=750 True Az=153.93 Ze=-6.495 Az status=0009 Ze status=0008 13:24:30 Check angles 13:24:30 SkyScan query 13:24:30 SkyScan query done: ret=0 az=171.33<-11422 ze=-6.495<-12433 Statuses=0009 0008 13:24:30 Msec=1500 True Az=171.33 Ze=-6.495 Az status=0009 Ze status=0008 13:24:30 Check angles 13:24:30 SkyScan query 13:24:31 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 13:24:31 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 13:24:31 Message to Master queued w/err=0: serial=278334 error=0 13:24:36 Received message from Master: op=Filter serial=278335 13:24:36 Color wheel filter change from 0 to 0 13:24:36 FLIGetFilterPos err=0 currentPosition=0 13:24:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:36 Filter is already there-color wheel unchanged 13:24:36 Received message from Master: op=Shutter serial=278336 13:24:36 Shutter LASER close 13:24:36 Received message from Camera: op=State serial=278338 13:24:36 GetSingleValue result=40 Value=cccccccc 13:24:36 SkyScan query 13:24:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:24:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:37 Parameters OK 13:24:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:37 Set A/D data flow result=40 13:24:37 Set A/D channel type result=40 13:24:37 Set A/D encoding result=40 13:24:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:37 Set channel filter=0.000000e+000 result=40 13:24:37 Config A/D Result=40 13:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:37 Get A/D filter: -9.255963e+061 result=40 13:24:37 Get A/D value=-858993460 result=40 13:24:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:37 Parameters OK 13:24:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:37 Set A/D data flow result=40 13:24:37 Set A/D channel type result=40 13:24:37 Set A/D encoding result=40 13:24:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:37 Set channel filter=0.000000e+000 result=40 13:24:37 Config A/D Result=40 13:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:37 Get A/D filter: -9.255963e+061 result=40 13:24:37 Get A/D value=-858993460 result=40 13:24:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:37 Aux= 13:24:37 Message to Camera, serial 278338 queued 13:25:14 Received message from Master: op=PointingHead serial=278351 13:25:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:25:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:25:14 Point started: ret=0 13:25:14 point_skyscan result=0 13:25:15 Check angles 13:25:15 SkyScan query 13:25:15 SkyScan query done: ret=0 az=153.18<-10212 ze=6.51<-11566 Statuses=0009 0008 13:25:15 Msec=0 True Az=153.18 Ze=6.51 Az status=0009 Ze status=0008 13:25:16 Check angles 13:25:16 SkyScan query 13:25:16 SkyScan query done: ret=0 az=135.36<-9024 ze=6.495<-11567 Statuses=0009 0008 13:25:16 Msec=750 True Az=135.36 Ze=6.495 Az status=0009 Ze status=0008 13:25:16 Check angles 13:25:16 SkyScan query 13:25:17 SkyScan query done: ret=0 az=117.885<-7859 ze=6.495<-11567 Statuses=0009 0008 13:25:17 Msec=1500 True Az=117.885 Ze=6.495 Az status=0009 Ze status=0008 13:25:17 Check angles 13:25:17 SkyScan query 13:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:25:18 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:25:18 Message to Master queued w/err=0: serial=278351 error=0 13:25:23 Received message from Master: op=Filter serial=278352 13:25:23 Color wheel filter change from 0 to 0 13:25:23 FLIGetFilterPos err=0 currentPosition=0 13:25:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:23 Filter is already there-color wheel unchanged 13:25:23 Received message from Master: op=Shutter serial=278353 13:25:23 Shutter LASER close 13:25:23 Received message from Camera: op=State serial=278355 13:25:23 GetSingleValue result=40 Value=cccccccc 13:25:23 SkyScan query 13:25:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:25:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:23 Parameters OK 13:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:23 Set A/D data flow result=40 13:25:23 Set A/D channel type result=40 13:25:23 Set A/D encoding result=40 13:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:23 Set channel filter=0.000000e+000 result=40 13:25:23 Config A/D Result=40 13:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:23 Get A/D filter: -9.255963e+061 result=40 13:25:23 Get A/D value=-858993460 result=40 13:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:23 Parameters OK 13:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:23 Set A/D data flow result=40 13:25:23 Set A/D channel type result=40 13:25:23 Set A/D encoding result=40 13:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:23 Set channel filter=0.000000e+000 result=40 13:25:23 Config A/D Result=40 13:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:23 Get A/D filter: -9.255963e+061 result=40 13:25:23 Get A/D value=-858993460 result=40 13:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:23 Aux= 13:25:23 Message to Camera, serial 278355 queued 13:26:00 Received message from Master: op=PointingHead serial=278368 13:26:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:26:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:26:01 Point started: ret=0 13:26:01 point_skyscan result=0 13:26:01 Check angles 13:26:01 SkyScan query 13:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 13:26:02 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 13:26:02 Check angles 13:26:02 SkyScan query 13:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.475<-14965 Statuses=0008 0009 13:26:03 Msec=750 True Az=112.995 Ze=-44.475 Az status=0008 Ze status=0009 13:26:03 Check angles 13:26:03 SkyScan query 13:26:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.43<-16362 Statuses=0008 0009 13:26:03 Msec=1500 True Az=112.995 Ze=-65.43 Az status=0008 Ze status=0009 13:26:04 Check angles 13:26:04 SkyScan query 13:26:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.385<-17759 Statuses=0008 0009 13:26:04 Msec=2250 True Az=112.995 Ze=-86.385 Az status=0008 Ze status=0009 13:26:04 Check angles 13:26:04 SkyScan query 13:26:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.34<-19156 Statuses=0008 0009 13:26:05 Msec=3000 True Az=112.995 Ze=-107.34 Az status=0008 Ze status=0009 13:26:05 Check angles 13:26:05 SkyScan query 13:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.28<-20552 Statuses=0008 0009 13:26:06 Msec=3750 True Az=112.995 Ze=-128.28 Az status=0008 Ze status=0009 13:26:06 Check angles 13:26:06 SkyScan query 13:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.28<-21952 Statuses=0008 0009 13:26:06 Msec=4500 True Az=112.995 Ze=-149.28 Az status=0008 Ze status=0009 13:26:07 Check angles 13:26:07 SkyScan query 13:26:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.22<-23348 Statuses=0008 0009 13:26:07 Msec=5250 True Az=112.995 Ze=-170.22 Az status=0008 Ze status=0009 13:26:07 Check angles 13:26:07 SkyScan query 13:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:26:08 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:26:08 Message to Master queued w/err=0: serial=278368 error=0 13:26:13 Received message from Master: op=Filter serial=278369 13:26:13 Color wheel filter change from 0 to 0 13:26:13 FLIGetFilterPos err=0 currentPosition=0 13:26:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:13 Filter is already there-color wheel unchanged 13:26:13 Received message from Master: op=Shutter serial=278370 13:26:13 Shutter LASER open 13:26:13 Received message from Camera: op=State serial=278372 13:26:13 GetSingleValue result=40 Value=cccccccc 13:26:13 SkyScan query 13:26:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:26:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:14 Parameters OK 13:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:14 Set A/D data flow result=40 13:26:14 Set A/D channel type result=40 13:26:14 Set A/D encoding result=40 13:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:14 Set channel filter=0.000000e+000 result=40 13:26:14 Config A/D Result=40 13:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:14 Get A/D filter: -9.255963e+061 result=40 13:26:14 Get A/D value=-858993460 result=40 13:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:14 Parameters OK 13:26:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:14 Set A/D data flow result=40 13:26:14 Set A/D channel type result=40 13:26:14 Set A/D encoding result=40 13:26:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:14 Set channel filter=0.000000e+000 result=40 13:26:14 Config A/D Result=40 13:26:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:14 Get A/D filter: -9.255963e+061 result=40 13:26:14 Get A/D value=-858993460 result=40 13:26:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:14 Aux= 13:26:14 Message to Camera, serial 278372 queued 13:26:22 Received message from Master: op=Shutter serial=278382 13:26:22 Shutter LASER close 13:26:23 Received message from Master: op=PointingHead serial=278386 13:26:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:26:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:26:23 Point started: ret=0 13:26:23 point_skyscan result=0 13:26:24 Check angles 13:26:24 SkyScan query 13:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.16<-21544 Statuses=0008 0009 13:26:24 Msec=0 True Az=112.995 Ze=-143.16 Az status=0008 Ze status=0009 13:26:25 Check angles 13:26:25 SkyScan query 13:26:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.22<-20148 Statuses=0008 0009 13:26:25 Msec=750 True Az=112.995 Ze=-122.22 Az status=0008 Ze status=0009 13:26:25 Check angles 13:26:25 SkyScan query 13:26:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.295<-18753 Statuses=0008 0009 13:26:26 Msec=1500 True Az=112.995 Ze=-101.295 Az status=0008 Ze status=0009 13:26:26 Check angles 13:26:26 SkyScan query 13:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.31<-17354 Statuses=0008 0009 13:26:27 Msec=2250 True Az=112.995 Ze=-80.31 Az status=0008 Ze status=0009 13:26:27 Check angles 13:26:27 SkyScan query 13:26:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.37<-15958 Statuses=0008 0009 13:26:27 Msec=3000 True Az=112.995 Ze=-59.37 Az status=0008 Ze status=0009 13:26:28 Check angles 13:26:28 SkyScan query 13:26:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.37<-14558 Statuses=0008 0009 13:26:28 Msec=3750 True Az=112.995 Ze=-38.37 Az status=0008 Ze status=0009 13:26:28 Check angles 13:26:28 SkyScan query 13:26:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.43<-13162 Statuses=0008 0009 13:26:29 Msec=4500 True Az=112.995 Ze=-17.43 Az status=0008 Ze status=0009 13:26:29 Check angles 13:26:29 SkyScan query 13:26:30 SkyScan query done: ret=0 az=112.98<-7532 ze=3.555<-11763 Statuses=0008 0009 13:26:30 Msec=5250 True Az=112.98 Ze=3.555 Az status=0008 Ze status=0009 13:26:30 Check angles 13:26:30 SkyScan query 13:26:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:26:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:26:30 Message to Master queued w/err=0: serial=278386 error=0 13:26:35 Received message from Master: op=Filter serial=278387 13:26:35 Color wheel filter change from 0 to 0 13:26:35 FLIGetFilterPos err=0 currentPosition=0 13:26:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:35 Filter is already there-color wheel unchanged 13:26:36 Received message from Master: op=Shutter serial=278388 13:26:36 Shutter LASER close 13:26:36 Received message from Camera: op=State serial=278390 13:26:36 GetSingleValue result=40 Value=cccccccc 13:26:36 SkyScan query 13:26:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:26:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:36 Parameters OK 13:26:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:36 Set A/D data flow result=40 13:26:36 Set A/D channel type result=40 13:26:36 Set A/D encoding result=40 13:26:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:36 Set channel filter=0.000000e+000 result=40 13:26:36 Config A/D Result=40 13:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:36 Get A/D filter: -9.255963e+061 result=40 13:26:36 Get A/D value=-858993460 result=40 13:26:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:36 Parameters OK 13:26:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:36 Set A/D data flow result=40 13:26:36 Set A/D channel type result=40 13:26:36 Set A/D encoding result=40 13:26:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:36 Set channel filter=0.000000e+000 result=40 13:26:36 Config A/D Result=40 13:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:36 Get A/D filter: -9.255963e+061 result=40 13:26:36 Get A/D value=-858993460 result=40 13:26:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:36 Aux= 13:26:36 Message to Camera, serial 278390 queued 13:27:13 Received message from Master: op=PointingHead serial=278403 13:27:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:13 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:14 Point started: ret=0 13:27:14 point_skyscan result=0 13:27:14 Check angles 13:27:14 SkyScan query 13:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:15 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:27:15 Message to Master queued w/err=0: serial=278403 error=0 13:27:20 Received message from Master: op=Filter serial=278404 13:27:20 Color wheel filter change from 0 to 0 13:27:20 FLIGetFilterPos err=0 currentPosition=0 13:27:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:20 Filter is already there-color wheel unchanged 13:27:20 Received message from Master: op=Shutter serial=278405 13:27:20 Shutter LASER close 13:27:20 Received message from Camera: op=State serial=278407 13:27:20 GetSingleValue result=40 Value=cccccccc 13:27:20 SkyScan query 13:27:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:21 Parameters OK 13:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:21 Set A/D data flow result=40 13:27:21 Set A/D channel type result=40 13:27:21 Set A/D encoding result=40 13:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:21 Set channel filter=0.000000e+000 result=40 13:27:21 Config A/D Result=40 13:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:21 Get A/D filter: -9.255963e+061 result=40 13:27:21 Get A/D value=-858993460 result=40 13:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:21 Parameters OK 13:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:21 Set A/D data flow result=40 13:27:21 Set A/D channel type result=40 13:27:21 Set A/D encoding result=40 13:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:21 Set channel filter=0.000000e+000 result=40 13:27:21 Config A/D Result=40 13:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:21 Get A/D filter: -9.255963e+061 result=40 13:27:21 Get A/D value=-858993460 result=40 13:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:21 Aux= 13:27:21 Message to Camera, serial 278407 queued 13:27:58 Received message from Master: op=PointingHead serial=278420 13:27:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:27:58 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:27:58 Point started: ret=0 13:27:58 point_skyscan result=0 13:27:59 Check angles 13:27:59 SkyScan query 13:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:27:59 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:27:59 Message to Master queued w/err=0: serial=278420 error=0 13:28:04 Received message from Master: op=Filter serial=278421 13:28:04 Color wheel filter change from 0 to 0 13:28:04 FLIGetFilterPos err=0 currentPosition=0 13:28:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:04 Filter is already there-color wheel unchanged 13:28:04 Received message from Master: op=Shutter serial=278422 13:28:04 Shutter LASER close 13:28:04 Received message from Camera: op=State serial=278424 13:28:04 GetSingleValue result=40 Value=cccccccc 13:28:04 SkyScan query 13:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:05 Parameters OK 13:28:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:05 Set A/D data flow result=40 13:28:05 Set A/D channel type result=40 13:28:05 Set A/D encoding result=40 13:28:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:05 Set channel filter=0.000000e+000 result=40 13:28:05 Config A/D Result=40 13:28:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:05 Get A/D filter: -9.255963e+061 result=40 13:28:05 Get A/D value=-858993460 result=40 13:28:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:05 Parameters OK 13:28:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:05 Set A/D data flow result=40 13:28:05 Set A/D channel type result=40 13:28:05 Set A/D encoding result=40 13:28:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:05 Set channel filter=0.000000e+000 result=40 13:28:05 Config A/D Result=40 13:28:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:05 Get A/D filter: -9.255963e+061 result=40 13:28:05 Get A/D value=-858993460 result=40 13:28:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:05 Aux= 13:28:05 Message to Camera, serial 278424 queued 13:28:42 Received message from Master: op=PointingHead serial=278437 13:28:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:28:42 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:28:42 Point started: ret=0 13:28:42 point_skyscan result=0 13:28:43 Check angles 13:28:43 SkyScan query 13:28:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:44 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:28:44 Message to Master queued w/err=0: serial=278437 error=0 13:28:49 Received message from Master: op=Filter serial=278438 13:28:49 Color wheel filter change from 0 to 0 13:28:49 FLIGetFilterPos err=0 currentPosition=0 13:28:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:49 Filter is already there-color wheel unchanged 13:28:49 Received message from Master: op=Shutter serial=278439 13:28:49 Shutter LASER close 13:28:49 Received message from Camera: op=State serial=278441 13:28:49 GetSingleValue result=40 Value=cccccccc 13:28:49 SkyScan query 13:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:28:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:49 Parameters OK 13:28:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:49 Set A/D data flow result=40 13:28:49 Set A/D channel type result=40 13:28:49 Set A/D encoding result=40 13:28:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:49 Set channel filter=0.000000e+000 result=40 13:28:49 Config A/D Result=40 13:28:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:49 Get A/D filter: -9.255963e+061 result=40 13:28:49 Get A/D value=-858993460 result=40 13:28:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:49 Parameters OK 13:28:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:49 Set A/D data flow result=40 13:28:49 Set A/D channel type result=40 13:28:49 Set A/D encoding result=40 13:28:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:49 Set channel filter=0.000000e+000 result=40 13:28:49 Config A/D Result=40 13:28:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:49 Get A/D filter: -9.255963e+061 result=40 13:28:49 Get A/D value=-858993460 result=40 13:28:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:49 Aux= 13:28:49 Message to Camera, serial 278441 queued 13:29:26 Received message from Master: op=PointingHead serial=278454 13:29:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:29:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:29:26 Point started: ret=0 13:29:26 point_skyscan result=0 13:29:27 Check angles 13:29:27 SkyScan query 13:29:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.37<-13558 Statuses=0008 0009 13:29:28 Msec=0 True Az=112.995 Ze=-23.37 Az status=0008 Ze status=0009 13:29:28 Check angles 13:29:28 SkyScan query 13:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.355<-14957 Statuses=0008 0009 13:29:29 Msec=750 True Az=112.995 Ze=-44.355 Az status=0008 Ze status=0009 13:29:29 Check angles 13:29:29 SkyScan query 13:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.715<-16381 Statuses=0008 0009 13:29:29 Msec=1500 True Az=112.995 Ze=-65.715 Az status=0008 Ze status=0009 13:29:29 Check angles 13:29:29 SkyScan query 13:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.685<-17779 Statuses=0008 0009 13:29:30 Msec=2250 True Az=112.995 Ze=-86.685 Az status=0008 Ze status=0009 13:29:30 Check angles 13:29:30 SkyScan query 13:29:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.64<-19176 Statuses=0008 0009 13:29:31 Msec=3000 True Az=112.995 Ze=-107.64 Az status=0008 Ze status=0009 13:29:31 Check angles 13:29:31 SkyScan query 13:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.58<-20572 Statuses=0008 0009 13:29:32 Msec=3750 True Az=112.995 Ze=-128.58 Az status=0008 Ze status=0009 13:29:32 Check angles 13:29:32 SkyScan query 13:29:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.985<-21999 Statuses=0008 0009 13:29:32 Msec=4500 True Az=112.995 Ze=-149.985 Az status=0008 Ze status=0009 13:29:33 Check angles 13:29:33 SkyScan query 13:29:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.85<-23390 Statuses=0008 0009 13:29:33 Msec=5250 True Az=112.995 Ze=-170.85 Az status=0008 Ze status=0009 13:29:33 Check angles 13:29:33 SkyScan query 13:29:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:29:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:29:34 Message to Master queued w/err=0: serial=278454 error=0 13:29:39 Received message from Master: op=Filter serial=278455 13:29:39 Color wheel filter change from 0 to 0 13:29:39 FLIGetFilterPos err=0 currentPosition=0 13:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:39 Filter is already there-color wheel unchanged 13:29:39 Received message from Master: op=Shutter serial=278456 13:29:39 Shutter LASER open 13:29:39 Received message from Camera: op=State serial=278458 13:29:39 GetSingleValue result=40 Value=cccccccc 13:29:39 SkyScan query 13:29:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:40 Parameters OK 13:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:40 Set A/D data flow result=40 13:29:40 Set A/D channel type result=40 13:29:40 Set A/D encoding result=40 13:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:40 Set channel filter=0.000000e+000 result=40 13:29:40 Config A/D Result=40 13:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:40 Get A/D filter: -9.255963e+061 result=40 13:29:40 Get A/D value=-858993460 result=40 13:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:40 Parameters OK 13:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:40 Set A/D data flow result=40 13:29:40 Set A/D channel type result=40 13:29:40 Set A/D encoding result=40 13:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:40 Set channel filter=0.000000e+000 result=40 13:29:40 Config A/D Result=40 13:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:40 Get A/D filter: -9.255963e+061 result=40 13:29:40 Get A/D value=-858993460 result=40 13:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:40 Aux= 13:29:40 Message to Camera, serial 278458 queued 13:29:48 Received message from Master: op=Shutter serial=278468 13:29:48 Shutter LASER close 13:29:49 Received message from Master: op=PointingHead serial=278472 13:29:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:29:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:29:49 Point started: ret=0 13:29:49 point_skyscan result=0 13:29:50 Check angles 13:29:50 SkyScan query 13:29:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 13:29:50 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 13:29:51 Check angles 13:29:51 SkyScan query 13:29:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 13:29:51 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 13:29:51 Check angles 13:29:51 SkyScan query 13:29:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.595<-18773 Statuses=0008 0009 13:29:52 Msec=1500 True Az=112.995 Ze=-101.595 Az status=0008 Ze status=0009 13:29:52 Check angles 13:29:52 SkyScan query 13:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.61<-17374 Statuses=0008 0009 13:29:53 Msec=2250 True Az=112.995 Ze=-80.61 Az status=0008 Ze status=0009 13:29:53 Check angles 13:29:53 SkyScan query 13:29:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.7<-15980 Statuses=0008 0009 13:29:53 Msec=3000 True Az=112.995 Ze=-59.7 Az status=0008 Ze status=0009 13:29:54 Check angles 13:29:54 SkyScan query 13:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.235<-14549 Statuses=0008 0009 13:29:54 Msec=3750 True Az=112.995 Ze=-38.235 Az status=0008 Ze status=0009 13:29:54 Check angles 13:29:54 SkyScan query 13:29:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.31<-13154 Statuses=0008 0009 13:29:55 Msec=4500 True Az=112.995 Ze=-17.31 Az status=0008 Ze status=0009 13:29:55 Check angles 13:29:55 SkyScan query 13:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=3.675<-11755 Statuses=0008 0009 13:29:56 Msec=5250 True Az=112.995 Ze=3.675 Az status=0008 Ze status=0009 13:29:56 Check angles 13:29:56 SkyScan query 13:29:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:29:56 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:29:56 Message to Master queued w/err=0: serial=278472 error=0 13:30:01 Received message from Master: op=Filter serial=278473 13:30:01 Color wheel filter change from 0 to 0 13:30:01 FLIGetFilterPos err=0 currentPosition=0 13:30:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:01 Filter is already there-color wheel unchanged 13:30:02 Received message from Master: op=Shutter serial=278474 13:30:02 Shutter LASER close 13:30:02 Received message from Camera: op=State serial=278476 13:30:02 GetSingleValue result=40 Value=cccccccc 13:30:02 SkyScan query 13:30:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:02 Parameters OK 13:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:02 Set A/D data flow result=40 13:30:02 Set A/D channel type result=40 13:30:02 Set A/D encoding result=40 13:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:02 Set channel filter=0.000000e+000 result=40 13:30:02 Config A/D Result=40 13:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:02 Get A/D filter: -9.255963e+061 result=40 13:30:02 Get A/D value=-858993460 result=40 13:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:02 Parameters OK 13:30:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:02 Set A/D data flow result=40 13:30:02 Set A/D channel type result=40 13:30:02 Set A/D encoding result=40 13:30:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:02 Set channel filter=0.000000e+000 result=40 13:30:02 Config A/D Result=40 13:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:02 Get A/D filter: -9.255963e+061 result=40 13:30:02 Get A/D value=-858993460 result=40 13:30:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:02 Aux= 13:30:02 Message to Camera, serial 278476 queued 13:30:39 Received message from Master: op=PointingHead serial=278489 13:30:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:30:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:30:40 Point started: ret=0 13:30:40 point_skyscan result=0 13:30:40 Check angles 13:30:40 SkyScan query 13:30:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:41 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:30:41 Message to Master queued w/err=0: serial=278489 error=0 13:30:46 Received message from Master: op=Filter serial=278490 13:30:46 Color wheel filter change from 0 to 0 13:30:46 FLIGetFilterPos err=0 currentPosition=0 13:30:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:46 Filter is already there-color wheel unchanged 13:30:46 Received message from Master: op=Shutter serial=278491 13:30:46 Shutter LASER close 13:30:46 Received message from Camera: op=State serial=278493 13:30:46 GetSingleValue result=40 Value=cccccccc 13:30:46 SkyScan query 13:30:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:30:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:47 Parameters OK 13:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:47 Set A/D data flow result=40 13:30:47 Set A/D channel type result=40 13:30:47 Set A/D encoding result=40 13:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:47 Set channel filter=0.000000e+000 result=40 13:30:47 Config A/D Result=40 13:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:47 Get A/D filter: -9.255963e+061 result=40 13:30:47 Get A/D value=-858993460 result=40 13:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:47 Parameters OK 13:30:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:47 Set A/D data flow result=40 13:30:47 Set A/D channel type result=40 13:30:47 Set A/D encoding result=40 13:30:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:47 Set channel filter=0.000000e+000 result=40 13:30:47 Config A/D Result=40 13:30:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:47 Get A/D filter: -9.255963e+061 result=40 13:30:47 Get A/D value=-858993460 result=40 13:30:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:47 Aux= 13:30:47 Message to Camera, serial 278493 queued 13:31:23 Received message from Master: op=PointingHead serial=278505 13:31:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:31:23 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:31:23 Point started: ret=0 13:31:23 point_skyscan result=0 13:31:24 Check angles 13:31:24 SkyScan query 13:31:24 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 13:31:24 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 13:31:25 Check angles 13:31:25 SkyScan query 13:31:25 SkyScan query done: ret=0 az=154.14<-10276 ze=-6.495<-12433 Statuses=0009 0008 13:31:25 Msec=750 True Az=154.14 Ze=-6.495 Az status=0009 Ze status=0008 13:31:25 Check angles 13:31:25 SkyScan query 13:31:26 SkyScan query done: ret=0 az=171.57<-11438 ze=-6.495<-12433 Statuses=0009 0008 13:31:26 Msec=1500 True Az=171.57 Ze=-6.495 Az status=0009 Ze status=0008 13:31:26 Check angles 13:31:26 SkyScan query 13:31:27 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 13:31:27 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 13:31:27 Message to Master queued w/err=0: serial=278505 error=0 13:31:32 Received message from Master: op=Filter serial=278506 13:31:32 Color wheel filter change from 0 to 0 13:31:32 FLIGetFilterPos err=0 currentPosition=0 13:31:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:32 Filter is already there-color wheel unchanged 13:31:32 Received message from Master: op=Shutter serial=278507 13:31:32 Shutter LASER close 13:31:32 Received message from Camera: op=State serial=278509 13:31:32 GetSingleValue result=40 Value=cccccccc 13:31:32 SkyScan query 13:31:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:31:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:32 Parameters OK 13:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:32 Set A/D data flow result=40 13:31:32 Set A/D channel type result=40 13:31:32 Set A/D encoding result=40 13:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:32 Set channel filter=0.000000e+000 result=40 13:31:32 Config A/D Result=40 13:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:32 Get A/D filter: -9.255963e+061 result=40 13:31:32 Get A/D value=-858993460 result=40 13:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:32 Parameters OK 13:31:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:32 Set A/D data flow result=40 13:31:32 Set A/D channel type result=40 13:31:32 Set A/D encoding result=40 13:31:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:32 Set channel filter=0.000000e+000 result=40 13:31:32 Config A/D Result=40 13:31:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:32 Get A/D filter: -9.255963e+061 result=40 13:31:32 Get A/D value=-858993460 result=40 13:31:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:32 Aux= 13:31:32 Message to Camera, serial 278509 queued 13:32:09 Received message from Master: op=PointingHead serial=278522 13:32:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:32:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:32:10 Point started: ret=0 13:32:10 point_skyscan result=0 13:32:10 Check angles 13:32:10 SkyScan query 13:32:11 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 13:32:11 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 13:32:11 Check angles 13:32:11 SkyScan query 13:32:12 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 13:32:12 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 13:32:12 Check angles 13:32:12 SkyScan query 13:32:12 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 13:32:12 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 13:32:13 Check angles 13:32:13 SkyScan query 13:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:13 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:32:13 Message to Master queued w/err=0: serial=278522 error=0 13:32:18 Received message from Master: op=Filter serial=278523 13:32:18 Color wheel filter change from 0 to 0 13:32:18 FLIGetFilterPos err=0 currentPosition=0 13:32:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:18 Filter is already there-color wheel unchanged 13:32:18 Received message from Master: op=Shutter serial=278524 13:32:18 Shutter LASER close 13:32:18 Received message from Camera: op=State serial=278526 13:32:18 GetSingleValue result=40 Value=cccccccc 13:32:18 SkyScan query 13:32:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:32:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:19 Parameters OK 13:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:19 Set A/D data flow result=40 13:32:19 Set A/D channel type result=40 13:32:19 Set A/D encoding result=40 13:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:19 Set channel filter=0.000000e+000 result=40 13:32:19 Config A/D Result=40 13:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:19 Get A/D filter: -9.255963e+061 result=40 13:32:19 Get A/D value=-858993460 result=40 13:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:19 Parameters OK 13:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:19 Set A/D data flow result=40 13:32:19 Set A/D channel type result=40 13:32:19 Set A/D encoding result=40 13:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:19 Set channel filter=0.000000e+000 result=40 13:32:19 Config A/D Result=40 13:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:19 Get A/D filter: -9.255963e+061 result=40 13:32:19 Get A/D value=-858993460 result=40 13:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:19 Aux= 13:32:19 Message to Camera, serial 278526 queued 13:32:56 Received message from Master: op=PointingHead serial=278539 13:32:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:32:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:32:56 Point started: ret=0 13:32:56 point_skyscan result=0 13:32:57 Check angles 13:32:57 SkyScan query 13:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 13:32:57 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 13:32:58 Check angles 13:32:58 SkyScan query 13:32:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 13:32:58 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 13:32:58 Check angles 13:32:58 SkyScan query 13:32:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 13:32:59 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 13:32:59 Check angles 13:32:59 SkyScan query 13:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 13:33:00 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 13:33:00 Check angles 13:33:00 SkyScan query 13:33:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 13:33:00 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 13:33:01 Check angles 13:33:01 SkyScan query 13:33:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 13:33:01 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 13:33:01 Check angles 13:33:01 SkyScan query 13:33:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 13:33:02 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 13:33:02 Check angles 13:33:02 SkyScan query 13:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 13:33:03 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 13:33:03 Check angles 13:33:03 SkyScan query 13:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:33:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:33:03 Message to Master queued w/err=0: serial=278539 error=0 13:33:08 Received message from Master: op=Filter serial=278540 13:33:08 Color wheel filter change from 0 to 0 13:33:08 FLIGetFilterPos err=0 currentPosition=0 13:33:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:08 Filter is already there-color wheel unchanged 13:33:09 Received message from Master: op=Shutter serial=278541 13:33:09 Shutter LASER open 13:33:09 Received message from Camera: op=State serial=278543 13:33:09 GetSingleValue result=40 Value=cccccccc 13:33:09 SkyScan query 13:33:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:33:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:09 Parameters OK 13:33:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:09 Set A/D data flow result=40 13:33:09 Set A/D channel type result=40 13:33:09 Set A/D encoding result=40 13:33:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:09 Set channel filter=0.000000e+000 result=40 13:33:09 Config A/D Result=40 13:33:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:09 Get A/D filter: -9.255963e+061 result=40 13:33:09 Get A/D value=-858993460 result=40 13:33:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:09 Parameters OK 13:33:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:09 Set A/D data flow result=40 13:33:09 Set A/D channel type result=40 13:33:09 Set A/D encoding result=40 13:33:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:09 Set channel filter=0.000000e+000 result=40 13:33:09 Config A/D Result=40 13:33:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:09 Get A/D filter: -9.255963e+061 result=40 13:33:09 Get A/D value=-858993460 result=40 13:33:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:09 Aux= 13:33:09 Message to Camera, serial 278543 queued 13:33:18 Received message from Master: op=Shutter serial=278553 13:33:18 Shutter LASER close 13:33:18 Received message from Master: op=PointingHead serial=278557 13:33:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:33:18 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:33:19 Point started: ret=0 13:33:19 point_skyscan result=0 13:33:19 Check angles 13:33:19 SkyScan query 13:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.25<-21550 Statuses=0008 0009 13:33:20 Msec=0 True Az=112.995 Ze=-143.25 Az status=0008 Ze status=0009 13:33:20 Check angles 13:33:20 SkyScan query 13:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.31<-20154 Statuses=0008 0009 13:33:21 Msec=750 True Az=112.995 Ze=-122.31 Az status=0008 Ze status=0009 13:33:21 Check angles 13:33:21 SkyScan query 13:33:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.935<-18729 Statuses=0008 0009 13:33:21 Msec=1500 True Az=112.995 Ze=-100.935 Az status=0008 Ze status=0009 13:33:22 Check angles 13:33:22 SkyScan query 13:33:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.47<-17298 Statuses=0008 0009 13:33:22 Msec=2250 True Az=112.995 Ze=-79.47 Az status=0008 Ze status=0009 13:33:22 Check angles 13:33:22 SkyScan query 13:33:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.08<-15872 Statuses=0008 0009 13:33:23 Msec=3000 True Az=112.995 Ze=-58.08 Az status=0008 Ze status=0009 13:33:23 Check angles 13:33:23 SkyScan query 13:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.185<-14479 Statuses=0008 0009 13:33:24 Msec=3750 True Az=112.995 Ze=-37.185 Az status=0008 Ze status=0009 13:33:24 Check angles 13:33:24 SkyScan query 13:33:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.2<-13080 Statuses=0008 0009 13:33:24 Msec=4500 True Az=112.995 Ze=-16.2 Az status=0008 Ze status=0009 13:33:25 Check angles 13:33:25 SkyScan query 13:33:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.59<-11694 Statuses=0008 0009 13:33:25 Msec=5250 True Az=112.995 Ze=4.59 Az status=0008 Ze status=0009 13:33:25 Check angles 13:33:25 SkyScan query 13:33:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:33:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:33:26 Message to Master queued w/err=0: serial=278557 error=0 13:33:31 Received message from Master: op=Filter serial=278558 13:33:31 Color wheel filter change from 0 to 0 13:33:31 FLIGetFilterPos err=0 currentPosition=0 13:33:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:31 Filter is already there-color wheel unchanged 13:33:31 Received message from Master: op=Shutter serial=278559 13:33:31 Shutter LASER close 13:33:31 Received message from Camera: op=State serial=278561 13:33:31 GetSingleValue result=40 Value=cccccccc 13:33:31 SkyScan query 13:33:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:33:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:32 Parameters OK 13:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:32 Set A/D data flow result=40 13:33:32 Set A/D channel type result=40 13:33:32 Set A/D encoding result=40 13:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:32 Set channel filter=0.000000e+000 result=40 13:33:32 Config A/D Result=40 13:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:32 Get A/D filter: -9.255963e+061 result=40 13:33:32 Get A/D value=-858993460 result=40 13:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:32 Parameters OK 13:33:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:32 Set A/D data flow result=40 13:33:32 Set A/D channel type result=40 13:33:32 Set A/D encoding result=40 13:33:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:32 Set channel filter=0.000000e+000 result=40 13:33:32 Config A/D Result=40 13:33:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:32 Get A/D filter: -9.255963e+061 result=40 13:33:32 Get A/D value=-858993460 result=40 13:33:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 [UTC 2019-3-14 13:33:32] 13:33:32 Aux= 13:33:32 Message to Camera, serial 278561 queued 13:33:35 Received message from Master: op=Identify serial=278562 13:34:09 Received message from Master: op=PointingHead serial=278577 13:34:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:09 Point started: ret=0 13:34:09 point_skyscan result=0 13:34:10 Check angles 13:34:10 SkyScan query 13:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:10 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:34:10 Message to Master queued w/err=0: serial=278577 error=0 13:34:15 Received message from Master: op=Filter serial=278578 13:34:15 Color wheel filter change from 0 to 0 13:34:15 FLIGetFilterPos err=0 currentPosition=0 13:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:15 Filter is already there-color wheel unchanged 13:34:16 Received message from Master: op=Shutter serial=278579 13:34:16 Shutter LASER close 13:34:16 Received message from Camera: op=State serial=278581 13:34:16 GetSingleValue result=40 Value=cccccccc 13:34:16 SkyScan query 13:34:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:16 Parameters OK 13:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:16 Set A/D data flow result=40 13:34:16 Set A/D channel type result=40 13:34:16 Set A/D encoding result=40 13:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:16 Set channel filter=0.000000e+000 result=40 13:34:16 Config A/D Result=40 13:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:16 Get A/D filter: -9.255963e+061 result=40 13:34:16 Get A/D value=-858993460 result=40 13:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:16 Parameters OK 13:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:16 Set A/D data flow result=40 13:34:16 Set A/D channel type result=40 13:34:16 Set A/D encoding result=40 13:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:16 Set channel filter=0.000000e+000 result=40 13:34:16 Config A/D Result=40 13:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:16 Get A/D filter: -9.255963e+061 result=40 13:34:16 Get A/D value=-858993460 result=40 13:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:16 Aux= 13:34:16 Message to Camera, serial 278581 queued 13:34:53 Received message from Master: op=PointingHead serial=278594 13:34:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:34:53 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:34:53 Point started: ret=0 13:34:53 point_skyscan result=0 13:34:54 Check angles 13:34:54 SkyScan query 13:34:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:34:55 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:34:55 Message to Master queued w/err=0: serial=278594 error=0 13:35:00 Received message from Master: op=Filter serial=278595 13:35:00 Color wheel filter change from 0 to 0 13:35:00 FLIGetFilterPos err=0 currentPosition=0 13:35:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:00 Filter is already there-color wheel unchanged 13:35:00 Received message from Master: op=Shutter serial=278596 13:35:00 Shutter LASER close 13:35:00 Received message from Camera: op=State serial=278598 13:35:00 GetSingleValue result=40 Value=cccccccc 13:35:00 SkyScan query 13:35:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:00 Parameters OK 13:35:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:00 Set A/D data flow result=40 13:35:00 Set A/D channel type result=40 13:35:00 Set A/D encoding result=40 13:35:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:00 Set channel filter=0.000000e+000 result=40 13:35:00 Config A/D Result=40 13:35:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:00 Get A/D filter: -9.255963e+061 result=40 13:35:00 Get A/D value=-858993460 result=40 13:35:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:00 Parameters OK 13:35:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:00 Set A/D data flow result=40 13:35:00 Set A/D channel type result=40 13:35:00 Set A/D encoding result=40 13:35:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:00 Set channel filter=0.000000e+000 result=40 13:35:00 Config A/D Result=40 13:35:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:00 Get A/D filter: -9.255963e+061 result=40 13:35:00 Get A/D value=-858993460 result=40 13:35:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:00 Aux= 13:35:00 Message to Camera, serial 278598 queued 13:35:37 Received message from Master: op=PointingHead serial=278611 13:35:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:35:37 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:35:38 Point started: ret=0 13:35:38 point_skyscan result=0 13:35:38 Check angles 13:35:38 SkyScan query 13:35:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:39 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:35:39 Message to Master queued w/err=0: serial=278611 error=0 13:35:44 Received message from Master: op=Filter serial=278612 13:35:44 Color wheel filter change from 0 to 0 13:35:44 FLIGetFilterPos err=0 currentPosition=0 13:35:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:44 Filter is already there-color wheel unchanged 13:35:44 Received message from Master: op=Shutter serial=278613 13:35:44 Shutter LASER close 13:35:44 Received message from Camera: op=State serial=278615 13:35:44 GetSingleValue result=40 Value=cccccccc 13:35:44 SkyScan query 13:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:35:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:45 Parameters OK 13:35:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:45 Set A/D data flow result=40 13:35:45 Set A/D channel type result=40 13:35:45 Set A/D encoding result=40 13:35:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:45 Set channel filter=0.000000e+000 result=40 13:35:45 Config A/D Result=40 13:35:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:45 Get A/D filter: -9.255963e+061 result=40 13:35:45 Get A/D value=-858993460 result=40 13:35:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:45 Parameters OK 13:35:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:45 Set A/D data flow result=40 13:35:45 Set A/D channel type result=40 13:35:45 Set A/D encoding result=40 13:35:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:45 Set channel filter=0.000000e+000 result=40 13:35:45 Config A/D Result=40 13:35:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:45 Get A/D filter: -9.255963e+061 result=40 13:35:45 Get A/D value=-858993460 result=40 13:35:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:45 Aux= 13:35:45 Message to Camera, serial 278615 queued 13:36:21 Received message from Master: op=PointingHead serial=278627 13:36:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:36:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:36:21 Point started: ret=0 13:36:21 point_skyscan result=0 13:36:22 Check angles 13:36:22 SkyScan query 13:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 13:36:22 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 13:36:23 Check angles 13:36:23 SkyScan query 13:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.73<-14982 Statuses=0008 0009 13:36:23 Msec=750 True Az=112.995 Ze=-44.73 Az status=0008 Ze status=0009 13:36:23 Check angles 13:36:23 SkyScan query 13:36:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.15<-16410 Statuses=0008 0009 13:36:24 Msec=1500 True Az=112.995 Ze=-66.15 Az status=0008 Ze status=0009 13:36:24 Check angles 13:36:24 SkyScan query 13:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.555<-17837 Statuses=0008 0009 13:36:25 Msec=2250 True Az=112.995 Ze=-87.555 Az status=0008 Ze status=0009 13:36:25 Check angles 13:36:25 SkyScan query 13:36:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.885<-19259 Statuses=0008 0009 13:36:25 Msec=3000 True Az=112.995 Ze=-108.885 Az status=0008 Ze status=0009 13:36:26 Check angles 13:36:26 SkyScan query 13:36:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.855<-20657 Statuses=0008 0009 13:36:26 Msec=3750 True Az=112.995 Ze=-129.855 Az status=0008 Ze status=0009 13:36:26 Check angles 13:36:26 SkyScan query 13:36:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.78<-22052 Statuses=0008 0009 13:36:27 Msec=4500 True Az=112.995 Ze=-150.78 Az status=0008 Ze status=0009 13:36:27 Check angles 13:36:27 SkyScan query 13:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 13:36:28 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 13:36:28 Check angles 13:36:28 SkyScan query 13:36:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:36:28 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:36:28 Message to Master queued w/err=0: serial=278627 error=0 13:36:33 Received message from Master: op=Filter serial=278628 13:36:33 Color wheel filter change from 0 to 0 13:36:33 FLIGetFilterPos err=0 currentPosition=0 13:36:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:33 Filter is already there-color wheel unchanged 13:36:34 Received message from Master: op=Shutter serial=278629 13:36:34 Shutter LASER open 13:36:34 Received message from Camera: op=State serial=278631 13:36:34 GetSingleValue result=40 Value=cccccccc 13:36:34 SkyScan query 13:36:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:36:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:34 Parameters OK 13:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:34 Set A/D data flow result=40 13:36:34 Set A/D channel type result=40 13:36:34 Set A/D encoding result=40 13:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:34 Set channel filter=0.000000e+000 result=40 13:36:34 Config A/D Result=40 13:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:34 Get A/D filter: -9.255963e+061 result=40 13:36:34 Get A/D value=-858993460 result=40 13:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:34 Parameters OK 13:36:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:34 Set A/D data flow result=40 13:36:34 Set A/D channel type result=40 13:36:34 Set A/D encoding result=40 13:36:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:34 Set channel filter=0.000000e+000 result=40 13:36:34 Config A/D Result=40 13:36:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:34 Get A/D filter: -9.255963e+061 result=40 13:36:34 Get A/D value=-858993460 result=40 13:36:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:34 Aux= 13:36:34 Message to Camera, serial 278631 queued 13:36:43 Received message from Master: op=Shutter serial=278641 13:36:43 Shutter LASER close 13:36:43 Received message from Master: op=PointingHead serial=278645 13:36:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:36:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:36:44 Point started: ret=0 13:36:44 point_skyscan result=0 13:36:45 Check angles 13:36:45 SkyScan query 13:36:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.695<-21513 Statuses=0008 0009 13:36:45 Msec=0 True Az=112.995 Ze=-142.695 Az status=0008 Ze status=0009 13:36:45 Check angles 13:36:45 SkyScan query 13:36:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.695<-20113 Statuses=0008 0009 13:36:46 Msec=750 True Az=112.995 Ze=-121.695 Az status=0008 Ze status=0009 13:36:46 Check angles 13:36:46 SkyScan query 13:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.785<-18719 Statuses=0008 0009 13:36:47 Msec=1500 True Az=112.995 Ze=-100.785 Az status=0008 Ze status=0009 13:36:47 Check angles 13:36:47 SkyScan query 13:36:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 13:36:47 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 13:36:48 Check angles 13:36:48 SkyScan query 13:36:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.38<-15892 Statuses=0008 0009 13:36:48 Msec=3000 True Az=112.995 Ze=-58.38 Az status=0008 Ze status=0009 13:36:48 Check angles 13:36:48 SkyScan query 13:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 13:36:49 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 13:36:49 Check angles 13:36:49 SkyScan query 13:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 13:36:50 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 13:36:50 Check angles 13:36:50 SkyScan query 13:36:50 SkyScan query done: ret=0 az=112.995<-7533 ze=4.665<-11689 Statuses=0008 0009 13:36:50 Msec=5250 True Az=112.995 Ze=4.665 Az status=0008 Ze status=0009 13:36:51 Check angles 13:36:51 SkyScan query 13:36:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:36:51 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:36:51 Message to Master queued w/err=0: serial=278645 error=0 13:36:56 Received message from Master: op=Filter serial=278646 13:36:56 Color wheel filter change from 0 to 0 13:36:56 FLIGetFilterPos err=0 currentPosition=0 13:36:56 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:56 Filter is already there-color wheel unchanged 13:36:56 Received message from Master: op=Shutter serial=278647 13:36:56 Shutter LASER close 13:36:56 Received message from Camera: op=State serial=278649 13:36:56 GetSingleValue result=40 Value=cccccccc 13:36:56 SkyScan query 13:36:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:36:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:57 Parameters OK 13:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:57 Set A/D data flow result=40 13:36:57 Set A/D channel type result=40 13:36:57 Set A/D encoding result=40 13:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:57 Set channel filter=0.000000e+000 result=40 13:36:57 Config A/D Result=40 13:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:57 Get A/D filter: -9.255963e+061 result=40 13:36:57 Get A/D value=-858993460 result=40 13:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:57 Parameters OK 13:36:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:57 Set A/D data flow result=40 13:36:57 Set A/D channel type result=40 13:36:57 Set A/D encoding result=40 13:36:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:57 Set channel filter=0.000000e+000 result=40 13:36:57 Config A/D Result=40 13:36:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:57 Get A/D filter: -9.255963e+061 result=40 13:36:57 Get A/D value=-858993460 result=40 13:36:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:57 Aux= 13:36:57 Message to Camera, serial 278649 queued 13:37:34 Received message from Master: op=PointingHead serial=278662 13:37:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:37:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:37:34 Point started: ret=0 13:37:34 point_skyscan result=0 13:37:35 Check angles 13:37:35 SkyScan query 13:37:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:36 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:37:36 Message to Master queued w/err=0: serial=278662 error=0 13:37:41 Received message from Master: op=Filter serial=278663 13:37:41 Color wheel filter change from 0 to 0 13:37:41 FLIGetFilterPos err=0 currentPosition=0 13:37:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:41 Filter is already there-color wheel unchanged 13:37:41 Received message from Master: op=Shutter serial=278664 13:37:41 Shutter LASER close 13:37:41 Received message from Camera: op=State serial=278666 13:37:41 GetSingleValue result=40 Value=cccccccc 13:37:41 SkyScan query 13:37:41 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:37:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:41 Parameters OK 13:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:41 Set A/D data flow result=40 13:37:41 Set A/D channel type result=40 13:37:41 Set A/D encoding result=40 13:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:41 Set channel filter=0.000000e+000 result=40 13:37:41 Config A/D Result=40 13:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:41 Get A/D filter: -9.255963e+061 result=40 13:37:41 Get A/D value=-858993460 result=40 13:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:41 Parameters OK 13:37:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:41 Set A/D data flow result=40 13:37:41 Set A/D channel type result=40 13:37:41 Set A/D encoding result=40 13:37:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:41 Set channel filter=0.000000e+000 result=40 13:37:41 Config A/D Result=40 13:37:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:41 Get A/D filter: -9.255963e+061 result=40 13:37:41 Get A/D value=-858993460 result=40 13:37:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:41 Aux= 13:37:41 Message to Camera, serial 278666 queued 13:38:18 Received message from Master: op=PointingHead serial=278679 13:38:18 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:38:18 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:38:19 Point started: ret=0 13:38:19 point_skyscan result=0 13:38:19 Check angles 13:38:19 SkyScan query 13:38:20 SkyScan query done: ret=0 az=135.675<-9045 ze=-6.51<-12434 Statuses=0009 0008 13:38:20 Msec=0 True Az=135.675 Ze=-6.51 Az status=0009 Ze status=0008 13:38:20 Check angles 13:38:20 SkyScan query 13:38:21 SkyScan query done: ret=0 az=153.24<-10216 ze=-6.495<-12433 Statuses=0009 0008 13:38:21 Msec=750 True Az=153.24 Ze=-6.495 Az status=0009 Ze status=0008 13:38:21 Check angles 13:38:21 SkyScan query 13:38:21 SkyScan query done: ret=0 az=170.64<-11376 ze=-6.495<-12433 Statuses=0009 0008 13:38:21 Msec=1500 True Az=170.64 Ze=-6.495 Az status=0009 Ze status=0008 13:38:22 Check angles 13:38:22 SkyScan query 13:38:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 13:38:22 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 13:38:22 Message to Master queued w/err=0: serial=278679 error=0 13:38:27 Received message from Master: op=Filter serial=278680 13:38:27 Color wheel filter change from 0 to 0 13:38:27 FLIGetFilterPos err=0 currentPosition=0 13:38:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:27 Filter is already there-color wheel unchanged 13:38:27 Received message from Master: op=Shutter serial=278681 13:38:27 Shutter LASER close 13:38:27 Received message from Camera: op=State serial=278683 13:38:27 GetSingleValue result=40 Value=cccccccc 13:38:27 SkyScan query 13:38:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:38:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:28 Parameters OK 13:38:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:28 Set A/D data flow result=40 13:38:28 Set A/D channel type result=40 13:38:28 Set A/D encoding result=40 13:38:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:28 Set channel filter=0.000000e+000 result=40 13:38:28 Config A/D Result=40 13:38:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:28 Get A/D filter: -9.255963e+061 result=40 13:38:28 Get A/D value=-858993460 result=40 13:38:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:28 Parameters OK 13:38:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:28 Set A/D data flow result=40 13:38:28 Set A/D channel type result=40 13:38:28 Set A/D encoding result=40 13:38:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:28 Set channel filter=0.000000e+000 result=40 13:38:28 Config A/D Result=40 13:38:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:28 Get A/D filter: -9.255963e+061 result=40 13:38:28 Get A/D value=-858993460 result=40 13:38:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:28 Aux= 13:38:28 Message to Camera, serial 278683 queued 13:39:05 Received message from Master: op=PointingHead serial=278696 13:39:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:39:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:39:05 Point started: ret=0 13:39:05 point_skyscan result=0 13:39:06 Check angles 13:39:06 SkyScan query 13:39:06 SkyScan query done: ret=0 az=152.97<-10198 ze=6.51<-11566 Statuses=0009 0008 13:39:06 Msec=0 True Az=152.97 Ze=6.51 Az status=0009 Ze status=0008 13:39:07 Check angles 13:39:07 SkyScan query 13:39:07 SkyScan query done: ret=0 az=135.255<-9017 ze=6.495<-11567 Statuses=0009 0008 13:39:07 Msec=750 True Az=135.255 Ze=6.495 Az status=0009 Ze status=0008 13:39:07 Check angles 13:39:07 SkyScan query 13:39:08 SkyScan query done: ret=0 az=117.84<-7856 ze=6.495<-11567 Statuses=0009 0008 13:39:08 Msec=1500 True Az=117.84 Ze=6.495 Az status=0009 Ze status=0008 13:39:08 Check angles 13:39:08 SkyScan query 13:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:39:09 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:39:09 Message to Master queued w/err=0: serial=278696 error=0 13:39:14 Received message from Master: op=Filter serial=278697 13:39:14 Color wheel filter change from 0 to 0 13:39:14 FLIGetFilterPos err=0 currentPosition=0 13:39:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:14 Filter is already there-color wheel unchanged 13:39:14 Received message from Master: op=Shutter serial=278698 13:39:14 Shutter LASER close 13:39:14 Received message from Camera: op=State serial=278700 13:39:14 GetSingleValue result=40 Value=cccccccc 13:39:14 SkyScan query 13:39:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:39:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:14 Parameters OK 13:39:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:14 Set A/D data flow result=40 13:39:14 Set A/D channel type result=40 13:39:14 Set A/D encoding result=40 13:39:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:14 Set channel filter=0.000000e+000 result=40 13:39:14 Config A/D Result=40 13:39:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:14 Get A/D filter: -9.255963e+061 result=40 13:39:14 Get A/D value=-858993460 result=40 13:39:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:14 Parameters OK 13:39:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:14 Set A/D data flow result=40 13:39:14 Set A/D channel type result=40 13:39:14 Set A/D encoding result=40 13:39:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:14 Set channel filter=0.000000e+000 result=40 13:39:14 Config A/D Result=40 13:39:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:14 Get A/D filter: -9.255963e+061 result=40 13:39:14 Get A/D value=-858993460 result=40 13:39:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:14 Aux= 13:39:14 Message to Camera, serial 278700 queued 13:39:51 Received message from Master: op=PointingHead serial=278713 13:39:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:39:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:39:52 Point started: ret=0 13:39:52 point_skyscan result=0 13:39:52 Check angles 13:39:52 SkyScan query 13:39:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.115<-13541 Statuses=0008 0009 13:39:53 Msec=0 True Az=112.995 Ze=-23.115 Az status=0008 Ze status=0009 13:39:53 Check angles 13:39:53 SkyScan query 13:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.115<-14941 Statuses=0008 0009 13:39:54 Msec=750 True Az=112.995 Ze=-44.115 Az status=0008 Ze status=0009 13:39:54 Check angles 13:39:54 SkyScan query 13:39:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.1<-16340 Statuses=0008 0009 13:39:54 Msec=1500 True Az=112.995 Ze=-65.1 Az status=0008 Ze status=0009 13:39:55 Check angles 13:39:55 SkyScan query 13:39:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.95<-17730 Statuses=0008 0009 13:39:55 Msec=2250 True Az=112.995 Ze=-85.95 Az status=0008 Ze status=0009 13:39:55 Check angles 13:39:55 SkyScan query 13:39:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.905<-19127 Statuses=0008 0009 13:39:56 Msec=3000 True Az=112.995 Ze=-106.905 Az status=0008 Ze status=0009 13:39:56 Check angles 13:39:56 SkyScan query 13:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.86<-20524 Statuses=0008 0009 13:39:57 Msec=3750 True Az=112.995 Ze=-127.86 Az status=0008 Ze status=0009 13:39:57 Check angles 13:39:57 SkyScan query 13:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.31<-21954 Statuses=0008 0009 13:39:57 Msec=4500 True Az=112.995 Ze=-149.31 Az status=0008 Ze status=0009 13:39:58 Check angles 13:39:58 SkyScan query 13:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.235<-23349 Statuses=0008 0009 13:39:58 Msec=5250 True Az=112.995 Ze=-170.235 Az status=0008 Ze status=0009 13:39:58 Check angles 13:39:58 SkyScan query 13:39:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:39:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:39:59 Message to Master queued w/err=0: serial=278713 error=0 13:40:04 Received message from Master: op=Filter serial=278714 13:40:04 Color wheel filter change from 0 to 0 13:40:04 FLIGetFilterPos err=0 currentPosition=0 13:40:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:04 Filter is already there-color wheel unchanged 13:40:04 Received message from Master: op=Shutter serial=278715 13:40:04 Shutter LASER open 13:40:04 Received message from Camera: op=State serial=278717 13:40:04 GetSingleValue result=40 Value=cccccccc 13:40:04 SkyScan query 13:40:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:40:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:05 Parameters OK 13:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:05 Set A/D data flow result=40 13:40:05 Set A/D channel type result=40 13:40:05 Set A/D encoding result=40 13:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:05 Set channel filter=0.000000e+000 result=40 13:40:05 Config A/D Result=40 13:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:05 Get A/D filter: -9.255963e+061 result=40 13:40:05 Get A/D value=-858993460 result=40 13:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:05 Parameters OK 13:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:05 Set A/D data flow result=40 13:40:05 Set A/D channel type result=40 13:40:05 Set A/D encoding result=40 13:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:05 Set channel filter=0.000000e+000 result=40 13:40:05 Config A/D Result=40 13:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:05 Get A/D filter: -9.255963e+061 result=40 13:40:05 Get A/D value=-858993460 result=40 13:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:05 Aux= 13:40:05 Message to Camera, serial 278717 queued 13:40:13 Received message from Master: op=Shutter serial=278727 13:40:13 Shutter LASER close 13:40:14 Received message from Master: op=PointingHead serial=278731 13:40:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:40:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:40:14 Point started: ret=0 13:40:14 point_skyscan result=0 13:40:15 Check angles 13:40:15 SkyScan query 13:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.74<-21516 Statuses=0008 0009 13:40:15 Msec=0 True Az=112.995 Ze=-142.74 Az status=0008 Ze status=0009 13:40:16 Check angles 13:40:16 SkyScan query 13:40:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.755<-20117 Statuses=0008 0009 13:40:16 Msec=750 True Az=112.995 Ze=-121.755 Az status=0008 Ze status=0009 13:40:16 Check angles 13:40:16 SkyScan query 13:40:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.845<-18723 Statuses=0008 0009 13:40:17 Msec=1500 True Az=112.995 Ze=-100.845 Az status=0008 Ze status=0009 13:40:17 Check angles 13:40:17 SkyScan query 13:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.86<-17324 Statuses=0008 0009 13:40:18 Msec=2250 True Az=112.995 Ze=-79.86 Az status=0008 Ze status=0009 13:40:18 Check angles 13:40:18 SkyScan query 13:40:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.92<-15928 Statuses=0008 0009 13:40:18 Msec=3000 True Az=112.995 Ze=-58.92 Az status=0008 Ze status=0009 13:40:19 Check angles 13:40:19 SkyScan query 13:40:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.905<-14527 Statuses=0008 0009 13:40:19 Msec=3750 True Az=112.995 Ze=-37.905 Az status=0008 Ze status=0009 13:40:19 Check angles 13:40:19 SkyScan query 13:40:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.965<-13131 Statuses=0008 0009 13:40:20 Msec=4500 True Az=112.995 Ze=-16.965 Az status=0008 Ze status=0009 13:40:20 Check angles 13:40:20 SkyScan query 13:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=3.99<-11734 Statuses=0008 0009 13:40:21 Msec=5250 True Az=112.995 Ze=3.99 Az status=0008 Ze status=0009 13:40:21 Check angles 13:40:21 SkyScan query 13:40:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:40:21 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:40:21 Message to Master queued w/err=0: serial=278731 error=0 13:40:26 Received message from Master: op=Filter serial=278732 13:40:26 Color wheel filter change from 0 to 0 13:40:26 FLIGetFilterPos err=0 currentPosition=0 13:40:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:26 Filter is already there-color wheel unchanged 13:40:27 Received message from Master: op=Shutter serial=278733 13:40:27 Shutter LASER close 13:40:27 Received message from Camera: op=State serial=278735 13:40:27 GetSingleValue result=40 Value=cccccccc 13:40:27 SkyScan query 13:40:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:40:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:27 Parameters OK 13:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:27 Set A/D data flow result=40 13:40:27 Set A/D channel type result=40 13:40:27 Set A/D encoding result=40 13:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:27 Set channel filter=0.000000e+000 result=40 13:40:27 Config A/D Result=40 13:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:27 Get A/D filter: -9.255963e+061 result=40 13:40:27 Get A/D value=-858993460 result=40 13:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:27 Parameters OK 13:40:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:27 Set A/D data flow result=40 13:40:27 Set A/D channel type result=40 13:40:27 Set A/D encoding result=40 13:40:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:27 Set channel filter=0.000000e+000 result=40 13:40:27 Config A/D Result=40 13:40:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:27 Get A/D filter: -9.255963e+061 result=40 13:40:27 Get A/D value=-858993460 result=40 13:40:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:27 Aux= 13:40:27 Message to Camera, serial 278735 queued 13:41:04 Received message from Master: op=PointingHead serial=278748 13:41:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:05 Point started: ret=0 13:41:05 point_skyscan result=0 13:41:05 Check angles 13:41:05 SkyScan query 13:41:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:41:06 Message to Master queued w/err=0: serial=278748 error=0 13:41:11 Received message from Master: op=Filter serial=278749 13:41:11 Color wheel filter change from 0 to 0 13:41:11 FLIGetFilterPos err=0 currentPosition=0 13:41:11 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:11 Filter is already there-color wheel unchanged 13:41:11 Received message from Master: op=Shutter serial=278750 13:41:11 Shutter LASER close 13:41:11 Received message from Camera: op=State serial=278752 13:41:11 GetSingleValue result=40 Value=cccccccc 13:41:11 SkyScan query 13:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:12 Parameters OK 13:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:12 Set A/D data flow result=40 13:41:12 Set A/D channel type result=40 13:41:12 Set A/D encoding result=40 13:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:12 Set channel filter=0.000000e+000 result=40 13:41:12 Config A/D Result=40 13:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:12 Get A/D filter: -9.255963e+061 result=40 13:41:12 Get A/D value=-858993460 result=40 13:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:12 Parameters OK 13:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:12 Set A/D data flow result=40 13:41:12 Set A/D channel type result=40 13:41:12 Set A/D encoding result=40 13:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:12 Set channel filter=0.000000e+000 result=40 13:41:12 Config A/D Result=40 13:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:12 Get A/D filter: -9.255963e+061 result=40 13:41:12 Get A/D value=-858993460 result=40 13:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:12 Aux= 13:41:12 Message to Camera, serial 278752 queued 13:41:49 Received message from Master: op=PointingHead serial=278765 13:41:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:41:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:41:49 Point started: ret=0 13:41:49 point_skyscan result=0 13:41:50 Check angles 13:41:50 SkyScan query 13:41:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:50 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:41:50 Message to Master queued w/err=0: serial=278765 error=0 13:41:55 Received message from Master: op=Filter serial=278766 13:41:55 Color wheel filter change from 0 to 0 13:41:55 FLIGetFilterPos err=0 currentPosition=0 13:41:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:55 Filter is already there-color wheel unchanged 13:41:55 Received message from Master: op=Shutter serial=278767 13:41:55 Shutter LASER close 13:41:55 Received message from Camera: op=State serial=278769 13:41:55 GetSingleValue result=40 Value=cccccccc 13:41:55 SkyScan query 13:41:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:41:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:56 Parameters OK 13:41:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:56 Set A/D data flow result=40 13:41:56 Set A/D channel type result=40 13:41:56 Set A/D encoding result=40 13:41:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:56 Set channel filter=0.000000e+000 result=40 13:41:56 Config A/D Result=40 13:41:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:56 Get A/D filter: -9.255963e+061 result=40 13:41:56 Get A/D value=-858993460 result=40 13:41:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:56 Parameters OK 13:41:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:56 Set A/D data flow result=40 13:41:56 Set A/D channel type result=40 13:41:56 Set A/D encoding result=40 13:41:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:56 Set channel filter=0.000000e+000 result=40 13:41:56 Config A/D Result=40 13:41:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:56 Get A/D filter: -9.255963e+061 result=40 13:41:56 Get A/D value=-858993460 result=40 13:41:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:56 Aux= 13:41:56 Message to Camera, serial 278769 queued 13:42:33 Received message from Master: op=PointingHead serial=278782 13:42:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:42:33 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:42:33 Point started: ret=0 13:42:33 point_skyscan result=0 13:42:34 Check angles 13:42:34 SkyScan query 13:42:34 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:34 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:42:34 Message to Master queued w/err=0: serial=278782 error=0 13:42:39 Received message from Master: op=Filter serial=278783 13:42:39 Color wheel filter change from 0 to 0 13:42:39 FLIGetFilterPos err=0 currentPosition=0 13:42:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:39 Filter is already there-color wheel unchanged 13:42:40 Received message from Master: op=Shutter serial=278784 13:42:40 Shutter LASER close 13:42:40 Received message from Camera: op=State serial=278786 13:42:40 GetSingleValue result=40 Value=cccccccc 13:42:40 SkyScan query 13:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:42:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:40 Parameters OK 13:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:40 Set A/D data flow result=40 13:42:40 Set A/D channel type result=40 13:42:40 Set A/D encoding result=40 13:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:40 Set channel filter=0.000000e+000 result=40 13:42:40 Config A/D Result=40 13:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:40 Get A/D filter: -9.255963e+061 result=40 13:42:40 Get A/D value=-858993460 result=40 13:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:40 Parameters OK 13:42:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:40 Set A/D data flow result=40 13:42:40 Set A/D channel type result=40 13:42:40 Set A/D encoding result=40 13:42:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:40 Set channel filter=0.000000e+000 result=40 13:42:40 Config A/D Result=40 13:42:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:40 Get A/D filter: -9.255963e+061 result=40 13:42:40 Get A/D value=-858993460 result=40 13:42:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:40 Aux= 13:42:40 Message to Camera, serial 278786 queued 13:43:17 Received message from Master: op=PointingHead serial=278799 13:43:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:43:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:43:17 Point started: ret=0 13:43:17 point_skyscan result=0 13:43:18 Check angles 13:43:18 SkyScan query 13:43:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 13:43:19 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 13:43:19 Check angles 13:43:19 SkyScan query 13:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 13:43:20 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 13:43:20 Check angles 13:43:20 SkyScan query 13:43:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.685<-16379 Statuses=0008 0009 13:43:20 Msec=1500 True Az=112.995 Ze=-65.685 Az status=0008 Ze status=0009 13:43:20 Check angles 13:43:20 SkyScan query 13:43:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.655<-17777 Statuses=0008 0009 13:43:21 Msec=2250 True Az=112.995 Ze=-86.655 Az status=0008 Ze status=0009 13:43:21 Check angles 13:43:21 SkyScan query 13:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.625<-19175 Statuses=0008 0009 13:43:22 Msec=3000 True Az=112.995 Ze=-107.625 Az status=0008 Ze status=0009 13:43:22 Check angles 13:43:22 SkyScan query 13:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.565<-20571 Statuses=0008 0009 13:43:23 Msec=3750 True Az=112.995 Ze=-128.565 Az status=0008 Ze status=0009 13:43:23 Check angles 13:43:23 SkyScan query 13:43:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.985<-21999 Statuses=0008 0009 13:43:23 Msec=4500 True Az=112.995 Ze=-149.985 Az status=0008 Ze status=0009 13:43:24 Check angles 13:43:24 SkyScan query 13:43:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.15<-23410 Statuses=0008 0009 13:43:24 Msec=5250 True Az=112.995 Ze=-171.15 Az status=0008 Ze status=0009 13:43:24 Check angles 13:43:24 SkyScan query 13:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:43:25 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:43:25 Message to Master queued w/err=0: serial=278799 error=0 13:43:30 Received message from Master: op=Filter serial=278800 13:43:30 Color wheel filter change from 0 to 0 13:43:30 FLIGetFilterPos err=0 currentPosition=0 13:43:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:30 Filter is already there-color wheel unchanged 13:43:30 Received message from Master: op=Shutter serial=278801 13:43:30 Shutter LASER open 13:43:30 Received message from Camera: op=State serial=278803 13:43:30 GetSingleValue result=40 Value=cccccccc 13:43:30 SkyScan query 13:43:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:43:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:31 Parameters OK 13:43:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:31 Set A/D data flow result=40 13:43:31 Set A/D channel type result=40 13:43:31 Set A/D encoding result=40 13:43:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:31 Set channel filter=0.000000e+000 result=40 13:43:31 Config A/D Result=40 13:43:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:31 Get A/D filter: -9.255963e+061 result=40 13:43:31 Get A/D value=-858993460 result=40 13:43:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:31 Parameters OK 13:43:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:31 Set A/D data flow result=40 13:43:31 Set A/D channel type result=40 13:43:31 Set A/D encoding result=40 13:43:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:31 Set channel filter=0.000000e+000 result=40 13:43:31 Config A/D Result=40 13:43:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:31 Get A/D filter: -9.255963e+061 result=40 13:43:31 Get A/D value=-858993460 result=40 13:43:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:31 Aux= 13:43:31 Message to Camera, serial 278803 queued 13:43:39 Received message from Master: op=Shutter serial=278813 13:43:39 Shutter LASER close 13:43:40 Received message from Master: op=PointingHead serial=278817 13:43:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:43:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:43:40 Point started: ret=0 13:43:40 point_skyscan result=0 13:43:41 Check angles 13:43:41 SkyScan query 13:43:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.46<-21564 Statuses=0008 0009 13:43:41 Msec=0 True Az=112.995 Ze=-143.46 Az status=0008 Ze status=0009 13:43:42 Check angles 13:43:42 SkyScan query 13:43:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.115<-20141 Statuses=0008 0009 13:43:42 Msec=750 True Az=112.995 Ze=-122.115 Az status=0008 Ze status=0009 13:43:42 Check angles 13:43:42 SkyScan query 13:43:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.725<-18715 Statuses=0008 0009 13:43:43 Msec=1500 True Az=112.995 Ze=-100.725 Az status=0008 Ze status=0009 13:43:43 Check angles 13:43:43 SkyScan query 13:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.755<-17317 Statuses=0008 0009 13:43:44 Msec=2250 True Az=112.995 Ze=-79.755 Az status=0008 Ze status=0009 13:43:44 Check angles 13:43:44 SkyScan query 13:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.8<-15920 Statuses=0008 0009 13:43:44 Msec=3000 True Az=112.995 Ze=-58.8 Az status=0008 Ze status=0009 13:43:45 Check angles 13:43:45 SkyScan query 13:43:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.815<-14521 Statuses=0008 0009 13:43:45 Msec=3750 True Az=112.995 Ze=-37.815 Az status=0008 Ze status=0009 13:43:45 Check angles 13:43:45 SkyScan query 13:43:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.86<-13124 Statuses=0008 0009 13:43:46 Msec=4500 True Az=112.995 Ze=-16.86 Az status=0008 Ze status=0009 13:43:46 Check angles 13:43:46 SkyScan query 13:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=4.395<-11707 Statuses=0008 0009 13:43:47 Msec=5250 True Az=112.995 Ze=4.395 Az status=0008 Ze status=0009 13:43:47 Check angles 13:43:47 SkyScan query 13:43:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:43:47 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:43:47 Message to Master queued w/err=0: serial=278817 error=0 [UTC 2019-3-14 13:43:48] 13:43:52 Received message from Master: op=Filter serial=278818 13:43:52 Color wheel filter change from 0 to 0 13:43:52 FLIGetFilterPos err=0 currentPosition=0 13:43:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:52 Filter is already there-color wheel unchanged 13:43:53 Received message from Master: op=Shutter serial=278819 13:43:53 Shutter LASER close 13:43:53 Received message from Camera: op=State serial=278821 13:43:53 GetSingleValue result=40 Value=cccccccc 13:43:53 SkyScan query 13:43:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:43:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:53 Parameters OK 13:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:53 Set A/D data flow result=40 13:43:53 Set A/D channel type result=40 13:43:53 Set A/D encoding result=40 13:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:53 Set channel filter=0.000000e+000 result=40 13:43:53 Config A/D Result=40 13:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:53 Get A/D filter: -9.255963e+061 result=40 13:43:53 Get A/D value=-858993460 result=40 13:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:53 Parameters OK 13:43:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:53 Set A/D data flow result=40 13:43:53 Set A/D channel type result=40 13:43:53 Set A/D encoding result=40 13:43:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:53 Set channel filter=0.000000e+000 result=40 13:43:53 Config A/D Result=40 13:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:53 Get A/D filter: -9.255963e+061 result=40 13:43:53 Get A/D value=-858993460 result=40 13:43:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:53 Aux= 13:43:53 Message to Camera, serial 278821 queued 13:44:30 Received message from Master: op=PointingHead serial=278834 13:44:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:44:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:44:31 Point started: ret=0 13:44:31 point_skyscan result=0 13:44:31 Check angles 13:44:31 SkyScan query 13:44:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:44:32 Message to Master queued w/err=0: serial=278834 error=0 13:44:37 Received message from Master: op=Filter serial=278835 13:44:37 Color wheel filter change from 0 to 0 13:44:37 FLIGetFilterPos err=0 currentPosition=0 13:44:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:37 Filter is already there-color wheel unchanged 13:44:37 Received message from Master: op=Shutter serial=278836 13:44:37 Shutter LASER close 13:44:37 Received message from Camera: op=State serial=278838 13:44:37 GetSingleValue result=40 Value=cccccccc 13:44:37 SkyScan query 13:44:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:44:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:38 Parameters OK 13:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:38 Set A/D data flow result=40 13:44:38 Set A/D channel type result=40 13:44:38 Set A/D encoding result=40 13:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:38 Set channel filter=0.000000e+000 result=40 13:44:38 Config A/D Result=40 13:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:38 Get A/D filter: -9.255963e+061 result=40 13:44:38 Get A/D value=-858993460 result=40 13:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:38 Parameters OK 13:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:38 Set A/D data flow result=40 13:44:38 Set A/D channel type result=40 13:44:38 Set A/D encoding result=40 13:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:38 Set channel filter=0.000000e+000 result=40 13:44:38 Config A/D Result=40 13:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:38 Get A/D filter: -9.255963e+061 result=40 13:44:38 Get A/D value=-858993460 result=40 13:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:38 Aux= 13:44:38 Message to Camera, serial 278838 queued 13:45:14 Received message from Master: op=PointingHead serial=278850 13:45:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:45:14 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:45:14 Point started: ret=0 13:45:14 point_skyscan result=0 13:45:15 Check angles 13:45:15 SkyScan query 13:45:15 SkyScan query done: ret=0 az=135.75<-9050 ze=-6.51<-12434 Statuses=0009 0008 13:45:15 Msec=0 True Az=135.75 Ze=-6.51 Az status=0009 Ze status=0008 13:45:15 Check angles 13:45:15 SkyScan query 13:45:16 SkyScan query done: ret=0 az=153.24<-10216 ze=-6.495<-12433 Statuses=0009 0008 13:45:16 Msec=750 True Az=153.24 Ze=-6.495 Az status=0009 Ze status=0008 13:45:16 Check angles 13:45:16 SkyScan query 13:45:17 SkyScan query done: ret=0 az=171.105<-11407 ze=-6.495<-12433 Statuses=0009 0008 13:45:17 Msec=1500 True Az=171.105 Ze=-6.495 Az status=0009 Ze status=0008 13:45:17 Check angles 13:45:17 SkyScan query 13:45:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 13:45:18 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 13:45:18 Message to Master queued w/err=0: serial=278850 error=0 13:45:23 Received message from Master: op=Filter serial=278851 13:45:23 Color wheel filter change from 0 to 0 13:45:23 FLIGetFilterPos err=0 currentPosition=0 13:45:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:23 Filter is already there-color wheel unchanged 13:45:23 Received message from Master: op=Shutter serial=278852 13:45:23 Shutter LASER close 13:45:23 Received message from Camera: op=State serial=278854 13:45:23 GetSingleValue result=40 Value=cccccccc 13:45:23 SkyScan query 13:45:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:45:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:23 Parameters OK 13:45:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:23 Set A/D data flow result=40 13:45:23 Set A/D channel type result=40 13:45:23 Set A/D encoding result=40 13:45:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:23 Set channel filter=0.000000e+000 result=40 13:45:23 Config A/D Result=40 13:45:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:23 Get A/D filter: -9.255963e+061 result=40 13:45:23 Get A/D value=-858993460 result=40 13:45:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:23 Parameters OK 13:45:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:23 Set A/D data flow result=40 13:45:23 Set A/D channel type result=40 13:45:23 Set A/D encoding result=40 13:45:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:23 Set channel filter=0.000000e+000 result=40 13:45:23 Config A/D Result=40 13:45:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:23 Get A/D filter: -9.255963e+061 result=40 13:45:23 Get A/D value=-858993460 result=40 13:45:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:23 Aux= 13:45:23 Message to Camera, serial 278854 queued 13:46:00 Received message from Master: op=PointingHead serial=278867 13:46:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:46:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:46:00 Point started: ret=0 13:46:00 point_skyscan result=0 13:46:01 Check angles 13:46:01 SkyScan query 13:46:02 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 13:46:02 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 13:46:02 Check angles 13:46:02 SkyScan query 13:46:03 SkyScan query done: ret=0 az=135.69<-9046 ze=6.495<-11567 Statuses=0009 0008 13:46:03 Msec=750 True Az=135.69 Ze=6.495 Az status=0009 Ze status=0008 13:46:03 Check angles 13:46:03 SkyScan query 13:46:03 SkyScan query done: ret=0 az=118.125<-7875 ze=6.495<-11567 Statuses=0009 0008 13:46:03 Msec=1500 True Az=118.125 Ze=6.495 Az status=0009 Ze status=0008 13:46:04 Check angles 13:46:04 SkyScan query 13:46:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:46:04 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:46:04 Message to Master queued w/err=0: serial=278867 error=0 13:46:09 Received message from Master: op=Filter serial=278868 13:46:09 Color wheel filter change from 0 to 0 13:46:09 FLIGetFilterPos err=0 currentPosition=0 13:46:09 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:09 Filter is already there-color wheel unchanged 13:46:09 Received message from Master: op=Shutter serial=278869 13:46:09 Shutter LASER close 13:46:09 Received message from Camera: op=State serial=278871 13:46:09 GetSingleValue result=40 Value=cccccccc 13:46:09 SkyScan query 13:46:10 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:46:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:10 Parameters OK 13:46:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:10 Set A/D data flow result=40 13:46:10 Set A/D channel type result=40 13:46:10 Set A/D encoding result=40 13:46:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:10 Set channel filter=0.000000e+000 result=40 13:46:10 Config A/D Result=40 13:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:10 Get A/D filter: -9.255963e+061 result=40 13:46:10 Get A/D value=-858993460 result=40 13:46:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:10 Parameters OK 13:46:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:10 Set A/D data flow result=40 13:46:10 Set A/D channel type result=40 13:46:10 Set A/D encoding result=40 13:46:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:10 Set channel filter=0.000000e+000 result=40 13:46:10 Config A/D Result=40 13:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:10 Get A/D filter: -9.255963e+061 result=40 13:46:10 Get A/D value=-858993460 result=40 13:46:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:10 Aux= 13:46:10 Message to Camera, serial 278871 queued 13:46:47 Received message from Master: op=PointingHead serial=278884 13:46:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:46:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:46:47 Point started: ret=0 13:46:47 point_skyscan result=0 13:46:48 Check angles 13:46:48 SkyScan query 13:46:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.715<-13581 Statuses=0008 0009 13:46:48 Msec=0 True Az=112.995 Ze=-23.715 Az status=0008 Ze status=0009 13:46:49 Check angles 13:46:49 SkyScan query 13:46:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 13:46:49 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 13:46:49 Check angles 13:46:49 SkyScan query 13:46:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.595<-16373 Statuses=0008 0009 13:46:50 Msec=1500 True Az=112.995 Ze=-65.595 Az status=0008 Ze status=0009 13:46:50 Check angles 13:46:50 SkyScan query 13:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.565<-17771 Statuses=0008 0009 13:46:51 Msec=2250 True Az=112.995 Ze=-86.565 Az status=0008 Ze status=0009 13:46:51 Check angles 13:46:51 SkyScan query 13:46:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.535<-19169 Statuses=0008 0009 13:46:51 Msec=3000 True Az=112.995 Ze=-107.535 Az status=0008 Ze status=0009 13:46:52 Check angles 13:46:52 SkyScan query 13:46:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.475<-20565 Statuses=0008 0009 13:46:52 Msec=3750 True Az=112.995 Ze=-128.475 Az status=0008 Ze status=0009 13:46:52 Check angles 13:46:52 SkyScan query 13:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.475<-21965 Statuses=0008 0009 13:46:53 Msec=4500 True Az=112.995 Ze=-149.475 Az status=0008 Ze status=0009 13:46:53 Check angles 13:46:53 SkyScan query 13:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.415<-23361 Statuses=0008 0009 13:46:54 Msec=5250 True Az=112.995 Ze=-170.415 Az status=0008 Ze status=0009 13:46:54 Check angles 13:46:54 SkyScan query 13:46:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:46:54 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:46:54 Message to Master queued w/err=0: serial=278884 error=0 13:46:59 Received message from Master: op=Filter serial=278885 13:46:59 Color wheel filter change from 0 to 0 13:46:59 FLIGetFilterPos err=0 currentPosition=0 13:46:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:59 Filter is already there-color wheel unchanged 13:47:00 Received message from Master: op=Shutter serial=278886 13:47:00 Shutter LASER open 13:47:00 Received message from Camera: op=State serial=278888 13:47:00 GetSingleValue result=40 Value=cccccccc 13:47:00 SkyScan query 13:47:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:47:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:00 Parameters OK 13:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:00 Set A/D data flow result=40 13:47:00 Set A/D channel type result=40 13:47:00 Set A/D encoding result=40 13:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:00 Set channel filter=0.000000e+000 result=40 13:47:00 Config A/D Result=40 13:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:00 Get A/D filter: -9.255963e+061 result=40 13:47:00 Get A/D value=-858993460 result=40 13:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:00 Parameters OK 13:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:00 Set A/D data flow result=40 13:47:00 Set A/D channel type result=40 13:47:00 Set A/D encoding result=40 13:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:00 Set channel filter=0.000000e+000 result=40 13:47:00 Config A/D Result=40 13:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:00 Get A/D filter: -9.255963e+061 result=40 13:47:00 Get A/D value=-858993460 result=40 13:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:00 Aux= 13:47:00 Message to Camera, serial 278888 queued 13:47:09 Received message from Master: op=Shutter serial=278898 13:47:09 Shutter LASER close 13:47:09 Received message from Master: op=PointingHead serial=278902 13:47:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:47:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:47:10 Point started: ret=0 13:47:10 point_skyscan result=0 13:47:10 Check angles 13:47:10 SkyScan query 13:47:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.205<-21547 Statuses=0008 0009 13:47:11 Msec=0 True Az=112.995 Ze=-143.205 Az status=0008 Ze status=0009 13:47:11 Check angles 13:47:11 SkyScan query 13:47:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 13:47:12 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 13:47:12 Check angles 13:47:12 SkyScan query 13:47:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.38<-18692 Statuses=0008 0009 13:47:12 Msec=1500 True Az=112.995 Ze=-100.38 Az status=0008 Ze status=0009 13:47:13 Check angles 13:47:13 SkyScan query 13:47:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 13:47:13 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 13:47:13 Check angles 13:47:13 SkyScan query 13:47:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 13:47:14 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 13:47:14 Check angles 13:47:14 SkyScan query 13:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 13:47:15 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 13:47:15 Check angles 13:47:15 SkyScan query 13:47:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.14<-13076 Statuses=0008 0009 13:47:15 Msec=4500 True Az=112.995 Ze=-16.14 Az status=0008 Ze status=0009 13:47:16 Check angles 13:47:16 SkyScan query 13:47:16 SkyScan query done: ret=0 az=112.995<-7533 ze=4.635<-11691 Statuses=0008 0009 13:47:16 Msec=5250 True Az=112.995 Ze=4.635 Az status=0008 Ze status=0009 13:47:16 Check angles 13:47:16 SkyScan query 13:47:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:47:17 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:47:17 Message to Master queued w/err=0: serial=278902 error=0 13:47:22 Received message from Master: op=Filter serial=278903 13:47:22 Color wheel filter change from 0 to 0 13:47:22 FLIGetFilterPos err=0 currentPosition=0 13:47:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:22 Filter is already there-color wheel unchanged 13:47:22 Received message from Master: op=Shutter serial=278904 13:47:22 Shutter LASER close 13:47:22 Received message from Camera: op=State serial=278906 13:47:22 GetSingleValue result=40 Value=cccccccc 13:47:22 SkyScan query 13:47:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:47:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:23 Parameters OK 13:47:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:23 Set A/D data flow result=40 13:47:23 Set A/D channel type result=40 13:47:23 Set A/D encoding result=40 13:47:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:23 Set channel filter=0.000000e+000 result=40 13:47:23 Config A/D Result=40 13:47:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:23 Get A/D filter: -9.255963e+061 result=40 13:47:23 Get A/D value=-858993460 result=40 13:47:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:23 Parameters OK 13:47:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:23 Set A/D data flow result=40 13:47:23 Set A/D channel type result=40 13:47:23 Set A/D encoding result=40 13:47:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:23 Set channel filter=0.000000e+000 result=40 13:47:23 Config A/D Result=40 13:47:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:23 Get A/D filter: -9.255963e+061 result=40 13:47:23 Get A/D value=-858993460 result=40 13:47:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:23 Aux= 13:47:23 Message to Camera, serial 278906 queued 13:48:00 Received message from Master: op=PointingHead serial=278919 13:48:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:48:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:48:00 Point started: ret=0 13:48:00 point_skyscan result=0 13:48:01 Check angles 13:48:01 SkyScan query 13:48:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:48:01 Message to Master queued w/err=0: serial=278919 error=0 13:48:06 Received message from Master: op=Filter serial=278920 13:48:06 Color wheel filter change from 0 to 0 13:48:06 FLIGetFilterPos err=0 currentPosition=0 13:48:06 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:06 Filter is already there-color wheel unchanged 13:48:06 Received message from Master: op=Shutter serial=278921 13:48:06 Shutter LASER close 13:48:07 Received message from Camera: op=State serial=278923 13:48:07 GetSingleValue result=40 Value=cccccccc 13:48:07 SkyScan query 13:48:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:07 Parameters OK 13:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:07 Set A/D data flow result=40 13:48:07 Set A/D channel type result=40 13:48:07 Set A/D encoding result=40 13:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:07 Set channel filter=0.000000e+000 result=40 13:48:07 Config A/D Result=40 13:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:07 Get A/D filter: -9.255963e+061 result=40 13:48:07 Get A/D value=-858993460 result=40 13:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:07 Parameters OK 13:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:07 Set A/D data flow result=40 13:48:07 Set A/D channel type result=40 13:48:07 Set A/D encoding result=40 13:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:07 Set channel filter=0.000000e+000 result=40 13:48:07 Config A/D Result=40 13:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:07 Get A/D filter: -9.255963e+061 result=40 13:48:07 Get A/D value=-858993460 result=40 13:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:07 Aux= 13:48:07 Message to Camera, serial 278923 queued 13:48:44 Received message from Master: op=PointingHead serial=278936 13:48:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:48:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:48:44 Point started: ret=0 13:48:44 point_skyscan result=0 13:48:45 Check angles 13:48:45 SkyScan query 13:48:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:46 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:48:46 Message to Master queued w/err=0: serial=278936 error=0 13:48:51 Received message from Master: op=Filter serial=278937 13:48:51 Color wheel filter change from 0 to 0 13:48:51 FLIGetFilterPos err=0 currentPosition=0 13:48:51 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:51 Filter is already there-color wheel unchanged 13:48:51 Received message from Master: op=Shutter serial=278938 13:48:51 Shutter LASER close 13:48:51 Received message from Camera: op=State serial=278940 13:48:51 GetSingleValue result=40 Value=cccccccc 13:48:51 SkyScan query 13:48:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:48:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:51 Parameters OK 13:48:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:51 Set A/D data flow result=40 13:48:51 Set A/D channel type result=40 13:48:51 Set A/D encoding result=40 13:48:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:51 Set channel filter=0.000000e+000 result=40 13:48:51 Config A/D Result=40 13:48:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:51 Get A/D filter: -9.255963e+061 result=40 13:48:51 Get A/D value=-858993460 result=40 13:48:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:51 Parameters OK 13:48:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:51 Set A/D data flow result=40 13:48:51 Set A/D channel type result=40 13:48:51 Set A/D encoding result=40 13:48:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:51 Set channel filter=0.000000e+000 result=40 13:48:51 Config A/D Result=40 13:48:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:51 Get A/D filter: -9.255963e+061 result=40 13:48:51 Get A/D value=-858993460 result=40 13:48:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:51 Aux= 13:48:51 Message to Camera, serial 278940 queued 13:49:28 Received message from Master: op=PointingHead serial=278953 13:49:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:49:28 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:49:29 Point started: ret=0 13:49:29 point_skyscan result=0 13:49:29 Check angles 13:49:29 SkyScan query 13:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:30 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:49:30 Message to Master queued w/err=0: serial=278953 error=0 13:49:35 Received message from Master: op=Filter serial=278954 13:49:35 Color wheel filter change from 0 to 0 13:49:35 FLIGetFilterPos err=0 currentPosition=0 13:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:35 Filter is already there-color wheel unchanged 13:49:35 Received message from Master: op=Shutter serial=278955 13:49:35 Shutter LASER close 13:49:35 Received message from Camera: op=State serial=278957 13:49:35 GetSingleValue result=40 Value=cccccccc 13:49:35 SkyScan query 13:49:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:49:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:36 Parameters OK 13:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:36 Set A/D data flow result=40 13:49:36 Set A/D channel type result=40 13:49:36 Set A/D encoding result=40 13:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:36 Set channel filter=0.000000e+000 result=40 13:49:36 Config A/D Result=40 13:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:36 Get A/D filter: -9.255963e+061 result=40 13:49:36 Get A/D value=-858993460 result=40 13:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:36 Parameters OK 13:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:36 Set A/D data flow result=40 13:49:36 Set A/D channel type result=40 13:49:36 Set A/D encoding result=40 13:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:36 Set channel filter=0.000000e+000 result=40 13:49:36 Config A/D Result=40 13:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:36 Get A/D filter: -9.255963e+061 result=40 13:49:36 Get A/D value=-858993460 result=40 13:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:36 Aux= 13:49:36 Message to Camera, serial 278957 queued 13:50:12 Received message from Master: op=PointingHead serial=278969 13:50:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:50:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:50:12 Point started: ret=0 13:50:12 point_skyscan result=0 13:50:13 Check angles 13:50:13 SkyScan query 13:50:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 13:50:13 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 13:50:13 Check angles 13:50:13 SkyScan query 13:50:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.055<-14937 Statuses=0008 0009 13:50:14 Msec=750 True Az=112.995 Ze=-44.055 Az status=0008 Ze status=0009 13:50:14 Check angles 13:50:14 SkyScan query 13:50:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.385<-16359 Statuses=0008 0009 13:50:15 Msec=1500 True Az=112.995 Ze=-65.385 Az status=0008 Ze status=0009 13:50:15 Check angles 13:50:15 SkyScan query 13:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.34<-17756 Statuses=0008 0009 13:50:16 Msec=2250 True Az=112.995 Ze=-86.34 Az status=0008 Ze status=0009 13:50:16 Check angles 13:50:16 SkyScan query 13:50:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.295<-19153 Statuses=0008 0009 13:50:16 Msec=3000 True Az=112.995 Ze=-107.295 Az status=0008 Ze status=0009 13:50:17 Check angles 13:50:17 SkyScan query 13:50:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.7<-20580 Statuses=0008 0009 13:50:17 Msec=3750 True Az=112.995 Ze=-128.7 Az status=0008 Ze status=0009 13:50:17 Check angles 13:50:17 SkyScan query 13:50:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.685<-21979 Statuses=0008 0009 13:50:18 Msec=4500 True Az=112.995 Ze=-149.685 Az status=0008 Ze status=0009 13:50:18 Check angles 13:50:18 SkyScan query 13:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.94<-23396 Statuses=0008 0009 13:50:19 Msec=5250 True Az=112.995 Ze=-170.94 Az status=0008 Ze status=0009 13:50:19 Check angles 13:50:19 SkyScan query 13:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:50:19 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:50:19 Message to Master queued w/err=0: serial=278969 error=0 13:50:24 Received message from Master: op=Filter serial=278970 13:50:24 Color wheel filter change from 0 to 0 13:50:24 FLIGetFilterPos err=0 currentPosition=0 13:50:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:24 Filter is already there-color wheel unchanged 13:50:25 Received message from Master: op=Shutter serial=278971 13:50:25 Shutter LASER open 13:50:25 Received message from Camera: op=State serial=278973 13:50:25 GetSingleValue result=40 Value=cccccccc 13:50:25 SkyScan query 13:50:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:50:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:25 Parameters OK 13:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:25 Set A/D data flow result=40 13:50:25 Set A/D channel type result=40 13:50:25 Set A/D encoding result=40 13:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:25 Set channel filter=0.000000e+000 result=40 13:50:25 Config A/D Result=40 13:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:25 Get A/D filter: -9.255963e+061 result=40 13:50:25 Get A/D value=-858993460 result=40 13:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:25 Parameters OK 13:50:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:25 Set A/D data flow result=40 13:50:25 Set A/D channel type result=40 13:50:25 Set A/D encoding result=40 13:50:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:25 Set channel filter=0.000000e+000 result=40 13:50:25 Config A/D Result=40 13:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:25 Get A/D filter: -9.255963e+061 result=40 13:50:25 Get A/D value=-858993460 result=40 13:50:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:25 Aux= 13:50:25 Message to Camera, serial 278973 queued 13:50:34 Received message from Master: op=Shutter serial=278983 13:50:34 Shutter LASER close 13:50:34 Received message from Master: op=PointingHead serial=278987 13:50:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:50:34 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:50:35 Point started: ret=0 13:50:35 point_skyscan result=0 13:50:35 Check angles 13:50:35 SkyScan query 13:50:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.22<-21548 Statuses=0008 0009 13:50:36 Msec=0 True Az=112.995 Ze=-143.22 Az status=0008 Ze status=0009 13:50:36 Check angles 13:50:36 SkyScan query 13:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.8<-20120 Statuses=0008 0009 13:50:37 Msec=750 True Az=112.995 Ze=-121.8 Az status=0008 Ze status=0009 13:50:37 Check angles 13:50:37 SkyScan query 13:50:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.89<-18726 Statuses=0008 0009 13:50:37 Msec=1500 True Az=112.995 Ze=-100.89 Az status=0008 Ze status=0009 13:50:38 Check angles 13:50:38 SkyScan query 13:50:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.92<-17328 Statuses=0008 0009 13:50:38 Msec=2250 True Az=112.995 Ze=-79.92 Az status=0008 Ze status=0009 13:50:38 Check angles 13:50:38 SkyScan query 13:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.485<-15899 Statuses=0008 0009 13:50:39 Msec=3000 True Az=112.995 Ze=-58.485 Az status=0008 Ze status=0009 13:50:39 Check angles 13:50:39 SkyScan query 13:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.56<-14504 Statuses=0008 0009 13:50:40 Msec=3750 True Az=112.995 Ze=-37.56 Az status=0008 Ze status=0009 13:50:40 Check angles 13:50:40 SkyScan query 13:50:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.59<-13106 Statuses=0008 0009 13:50:40 Msec=4500 True Az=112.995 Ze=-16.59 Az status=0008 Ze status=0009 13:50:41 Check angles 13:50:41 SkyScan query 13:50:41 SkyScan query done: ret=0 az=112.995<-7533 ze=4.275<-11715 Statuses=0008 0009 13:50:41 Msec=5250 True Az=112.995 Ze=4.275 Az status=0008 Ze status=0009 13:50:41 Check angles 13:50:41 SkyScan query 13:50:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:50:42 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:50:42 Message to Master queued w/err=0: serial=278987 error=0 13:50:47 Received message from Master: op=Filter serial=278988 13:50:47 Color wheel filter change from 0 to 0 13:50:47 FLIGetFilterPos err=0 currentPosition=0 13:50:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:47 Filter is already there-color wheel unchanged 13:50:47 Received message from Master: op=Shutter serial=278989 13:50:47 Shutter LASER close 13:50:47 Received message from Camera: op=State serial=278991 13:50:47 GetSingleValue result=40 Value=cccccccc 13:50:47 SkyScan query 13:50:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:50:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:48 Parameters OK 13:50:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:48 Set A/D data flow result=40 13:50:48 Set A/D channel type result=40 13:50:48 Set A/D encoding result=40 13:50:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:48 Set channel filter=0.000000e+000 result=40 13:50:48 Config A/D Result=40 13:50:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:48 Get A/D filter: -9.255963e+061 result=40 13:50:48 Get A/D value=-858993460 result=40 13:50:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:48 Parameters OK 13:50:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:48 Set A/D data flow result=40 13:50:48 Set A/D channel type result=40 13:50:48 Set A/D encoding result=40 13:50:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:48 Set channel filter=0.000000e+000 result=40 13:50:48 Config A/D Result=40 13:50:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:48 Get A/D filter: -9.255963e+061 result=40 13:50:48 Get A/D value=-858993460 result=40 13:50:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:48 Aux= 13:50:48 Message to Camera, serial 278991 queued 13:51:25 Received message from Master: op=PointingHead serial=279004 13:51:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:51:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:51:25 Point started: ret=0 13:51:25 point_skyscan result=0 13:51:26 Check angles 13:51:26 SkyScan query 13:51:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:26 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:51:26 Message to Master queued w/err=0: serial=279004 error=0 13:51:31 Received message from Master: op=Filter serial=279005 13:51:31 Color wheel filter change from 0 to 0 13:51:31 FLIGetFilterPos err=0 currentPosition=0 13:51:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:31 Filter is already there-color wheel unchanged 13:51:32 Received message from Master: op=Shutter serial=279006 13:51:32 Shutter LASER close 13:51:32 Received message from Camera: op=State serial=279008 13:51:32 GetSingleValue result=40 Value=cccccccc 13:51:32 SkyScan query 13:51:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:51:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:32 Parameters OK 13:51:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:32 Set A/D data flow result=40 13:51:32 Set A/D channel type result=40 13:51:32 Set A/D encoding result=40 13:51:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:32 Set channel filter=0.000000e+000 result=40 13:51:32 Config A/D Result=40 13:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:32 Get A/D filter: -9.255963e+061 result=40 13:51:32 Get A/D value=-858993460 result=40 13:51:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:32 Parameters OK 13:51:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:32 Set A/D data flow result=40 13:51:32 Set A/D channel type result=40 13:51:32 Set A/D encoding result=40 13:51:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:32 Set channel filter=0.000000e+000 result=40 13:51:32 Config A/D Result=40 13:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:32 Get A/D filter: -9.255963e+061 result=40 13:51:32 Get A/D value=-858993460 result=40 13:51:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:32 Aux= 13:51:32 Message to Camera, serial 279008 queued 13:52:08 Received message from Master: op=PointingHead serial=279020 13:52:08 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:52:08 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:52:08 Point started: ret=0 13:52:08 point_skyscan result=0 13:52:09 Check angles 13:52:09 SkyScan query 13:52:10 SkyScan query done: ret=0 az=136.245<-9083 ze=-6.51<-12434 Statuses=0009 0008 13:52:10 Msec=0 True Az=136.245 Ze=-6.51 Az status=0009 Ze status=0008 13:52:10 Check angles 13:52:10 SkyScan query 13:52:11 SkyScan query done: ret=0 az=153.615<-10241 ze=-6.495<-12433 Statuses=0009 0008 13:52:11 Msec=750 True Az=153.615 Ze=-6.495 Az status=0009 Ze status=0008 13:52:11 Check angles 13:52:11 SkyScan query 13:52:11 SkyScan query done: ret=0 az=171.45<-11430 ze=-6.495<-12433 Statuses=0009 0008 13:52:11 Msec=1500 True Az=171.45 Ze=-6.495 Az status=0009 Ze status=0008 13:52:12 Check angles 13:52:12 SkyScan query 13:52:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 13:52:12 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 13:52:12 Message to Master queued w/err=0: serial=279020 error=0 13:52:17 Received message from Master: op=Filter serial=279021 13:52:17 Color wheel filter change from 0 to 0 13:52:17 FLIGetFilterPos err=0 currentPosition=0 13:52:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:17 Filter is already there-color wheel unchanged 13:52:17 Received message from Master: op=Shutter serial=279022 13:52:17 Shutter LASER close 13:52:17 Received message from Camera: op=State serial=279024 13:52:17 GetSingleValue result=40 Value=cccccccc 13:52:17 SkyScan query 13:52:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:52:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:18 Parameters OK 13:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:18 Set A/D data flow result=40 13:52:18 Set A/D channel type result=40 13:52:18 Set A/D encoding result=40 13:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:18 Set channel filter=0.000000e+000 result=40 13:52:18 Config A/D Result=40 13:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:18 Get A/D filter: -9.255963e+061 result=40 13:52:18 Get A/D value=-858993460 result=40 13:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:18 Parameters OK 13:52:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:18 Set A/D data flow result=40 13:52:18 Set A/D channel type result=40 13:52:18 Set A/D encoding result=40 13:52:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:18 Set channel filter=0.000000e+000 result=40 13:52:18 Config A/D Result=40 13:52:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:18 Get A/D filter: -9.255963e+061 result=40 13:52:18 Get A/D value=-858993460 result=40 13:52:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:18 Aux= 13:52:18 Message to Camera, serial 279024 queued 13:52:55 Received message from Master: op=PointingHead serial=279037 13:52:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:52:55 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:52:55 Point started: ret=0 13:52:55 point_skyscan result=0 13:52:56 Check angles 13:52:56 SkyScan query 13:52:56 SkyScan query done: ret=0 az=153.105<-10207 ze=6.51<-11566 Statuses=0009 0008 13:52:56 Msec=0 True Az=153.105 Ze=6.51 Az status=0009 Ze status=0008 13:52:57 Check angles 13:52:57 SkyScan query 13:52:57 SkyScan query done: ret=0 az=135.525<-9035 ze=6.495<-11567 Statuses=0009 0008 13:52:57 Msec=750 True Az=135.525 Ze=6.495 Az status=0009 Ze status=0008 13:52:57 Check angles 13:52:57 SkyScan query 13:52:58 SkyScan query done: ret=0 az=118.155<-7877 ze=6.495<-11567 Statuses=0009 0008 13:52:58 Msec=1500 True Az=118.155 Ze=6.495 Az status=0009 Ze status=0008 13:52:58 Check angles 13:52:58 SkyScan query 13:52:59 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:52:59 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:52:59 Message to Master queued w/err=0: serial=279037 error=0 13:53:04 Received message from Master: op=Filter serial=279038 13:53:04 Color wheel filter change from 0 to 0 13:53:04 FLIGetFilterPos err=0 currentPosition=0 13:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:04 Filter is already there-color wheel unchanged 13:53:04 Received message from Master: op=Shutter serial=279039 13:53:04 Shutter LASER close 13:53:04 Received message from Camera: op=State serial=279041 13:53:04 GetSingleValue result=40 Value=cccccccc 13:53:04 SkyScan query 13:53:04 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:04 Parameters OK 13:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:04 Set A/D data flow result=40 13:53:04 Set A/D channel type result=40 13:53:04 Set A/D encoding result=40 13:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:04 Set channel filter=0.000000e+000 result=40 13:53:04 Config A/D Result=40 13:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:04 Get A/D filter: -9.255963e+061 result=40 13:53:04 Get A/D value=-858993460 result=40 13:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:04 Parameters OK 13:53:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:04 Set A/D data flow result=40 13:53:04 Set A/D channel type result=40 13:53:04 Set A/D encoding result=40 13:53:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:04 Set channel filter=0.000000e+000 result=40 13:53:04 Config A/D Result=40 13:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:04 Get A/D filter: -9.255963e+061 result=40 13:53:04 Get A/D value=-858993460 result=40 13:53:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:04 Aux= 13:53:04 Message to Camera, serial 279041 queued 13:53:41 Received message from Master: op=PointingHead serial=279054 13:53:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:53:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:53:42 Point started: ret=0 13:53:42 point_skyscan result=0 13:53:42 Check angles 13:53:42 SkyScan query 13:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.415<-13561 Statuses=0008 0009 13:53:43 Msec=0 True Az=112.995 Ze=-23.415 Az status=0008 Ze status=0009 13:53:43 Check angles 13:53:43 SkyScan query 13:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.775<-14985 Statuses=0008 0009 13:53:44 Msec=750 True Az=112.995 Ze=-44.775 Az status=0008 Ze status=0009 13:53:44 Check angles 13:53:44 SkyScan query 13:53:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 13:53:44 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 13:53:45 Check angles 13:53:45 SkyScan query 13:53:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.7<-17780 Statuses=0008 0009 13:53:45 Msec=2250 True Az=112.995 Ze=-86.7 Az status=0008 Ze status=0009 13:53:45 Check angles 13:53:45 SkyScan query 13:53:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.15<-19210 Statuses=0008 0009 13:53:46 Msec=3000 True Az=112.995 Ze=-108.15 Az status=0008 Ze status=0009 13:53:46 Check angles 13:53:46 SkyScan query 13:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.495<-20633 Statuses=0008 0009 13:53:47 Msec=3750 True Az=112.995 Ze=-129.495 Az status=0008 Ze status=0009 13:53:47 Check angles 13:53:47 SkyScan query 13:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.42<-22028 Statuses=0008 0009 13:53:47 Msec=4500 True Az=112.995 Ze=-150.42 Az status=0008 Ze status=0009 13:53:48 Check angles 13:53:48 SkyScan query 13:53:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.195<-23413 Statuses=0008 0009 13:53:48 Msec=5250 True Az=112.995 Ze=-171.195 Az status=0008 Ze status=0009 13:53:48 Check angles 13:53:48 SkyScan query 13:53:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:53:49 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:53:49 Message to Master queued w/err=0: serial=279054 error=0 13:53:54 Received message from Master: op=Filter serial=279055 13:53:54 Color wheel filter change from 0 to 0 13:53:54 FLIGetFilterPos err=0 currentPosition=0 13:53:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:54 Filter is already there-color wheel unchanged 13:53:54 Received message from Master: op=Shutter serial=279056 13:53:54 Shutter LASER open 13:53:54 Received message from Camera: op=State serial=279058 13:53:54 GetSingleValue result=40 Value=cccccccc 13:53:54 SkyScan query 13:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:53:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:55 Parameters OK 13:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:55 Set A/D data flow result=40 13:53:55 Set A/D channel type result=40 13:53:55 Set A/D encoding result=40 13:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:55 Set channel filter=0.000000e+000 result=40 13:53:55 Config A/D Result=40 13:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:55 Get A/D filter: -9.255963e+061 result=40 13:53:55 Get A/D value=-858993460 result=40 13:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:55 Parameters OK 13:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:55 Set A/D data flow result=40 13:53:55 Set A/D channel type result=40 13:53:55 Set A/D encoding result=40 13:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:55 Set channel filter=0.000000e+000 result=40 13:53:55 Config A/D Result=40 13:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:55 Get A/D filter: -9.255963e+061 result=40 13:53:55 Get A/D value=-858993460 result=40 13:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:55 Aux= 13:53:55 Message to Camera, serial 279058 queued 13:54:03 Received message from Master: op=Shutter serial=279068 13:54:03 Shutter LASER close 13:54:04 Received message from Master: op=PointingHead serial=279072 13:54:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:54:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:04 Point started: ret=0 13:54:04 point_skyscan result=0 13:54:05 Check angles 13:54:05 SkyScan query 13:54:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.965<-21531 Statuses=0008 0009 13:54:05 Msec=0 True Az=112.995 Ze=-142.965 Az status=0008 Ze status=0009 13:54:06 Check angles 13:54:06 SkyScan query 13:54:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.995<-20133 Statuses=0008 0009 13:54:06 Msec=750 True Az=112.995 Ze=-121.995 Az status=0008 Ze status=0009 13:54:06 Check angles 13:54:06 SkyScan query 13:54:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.605<-18707 Statuses=0008 0009 13:54:07 Msec=1500 True Az=112.995 Ze=-100.605 Az status=0008 Ze status=0009 13:54:07 Check angles 13:54:07 SkyScan query 13:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.635<-17309 Statuses=0008 0009 13:54:08 Msec=2250 True Az=112.995 Ze=-79.635 Az status=0008 Ze status=0009 13:54:08 Check angles 13:54:08 SkyScan query 13:54:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.695<-15913 Statuses=0008 0009 13:54:08 Msec=3000 True Az=112.995 Ze=-58.695 Az status=0008 Ze status=0009 13:54:09 Check angles 13:54:09 SkyScan query 13:54:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.71<-14514 Statuses=0008 0009 13:54:09 Msec=3750 True Az=112.995 Ze=-37.71 Az status=0008 Ze status=0009 13:54:09 Check angles [UTC 2019-3-14 13:54:09] 13:54:09 SkyScan query 13:54:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-15.015<-13001 Statuses=0008 0009 13:54:10 Msec=4500 True Az=112.995 Ze=-15.015 Az status=0008 Ze status=0009 13:54:10 Check angles 13:54:10 SkyScan query 13:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=4.155<-11723 Statuses=0008 0009 13:54:11 Msec=5250 True Az=112.995 Ze=4.155 Az status=0008 Ze status=0009 13:54:11 Check angles 13:54:11 SkyScan query 13:54:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:54:11 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:54:11 Message to Master queued w/err=0: serial=279072 error=0 13:54:17 Received message from Master: op=Filter serial=279073 13:54:17 Color wheel filter change from 0 to 0 13:54:17 FLIGetFilterPos err=0 currentPosition=0 13:54:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:17 Filter is already there-color wheel unchanged 13:54:17 Received message from Master: op=Shutter serial=279074 13:54:17 Shutter LASER close 13:54:17 Received message from Camera: op=State serial=279076 13:54:17 GetSingleValue result=40 Value=cccccccc 13:54:17 SkyScan query 13:54:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:17 Parameters OK 13:54:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:17 Set A/D data flow result=40 13:54:17 Set A/D channel type result=40 13:54:17 Set A/D encoding result=40 13:54:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:17 Set channel filter=0.000000e+000 result=40 13:54:17 Config A/D Result=40 13:54:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:17 Get A/D filter: -9.255963e+061 result=40 13:54:17 Get A/D value=-858993460 result=40 13:54:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:17 Parameters OK 13:54:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:17 Set A/D data flow result=40 13:54:17 Set A/D channel type result=40 13:54:17 Set A/D encoding result=40 13:54:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:17 Set channel filter=0.000000e+000 result=40 13:54:17 Config A/D Result=40 13:54:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:17 Get A/D filter: -9.255963e+061 result=40 13:54:17 Get A/D value=-858993460 result=40 13:54:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:17 Aux= 13:54:17 Message to Camera, serial 279076 queued 13:54:54 Received message from Master: op=PointingHead serial=279089 13:54:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:54:54 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:54:55 Point started: ret=0 13:54:55 point_skyscan result=0 13:54:55 Check angles 13:54:55 SkyScan query 13:54:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:54:56 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:54:56 Message to Master queued w/err=0: serial=279089 error=0 13:55:01 Received message from Master: op=Filter serial=279090 13:55:01 Color wheel filter change from 0 to 0 13:55:01 FLIGetFilterPos err=0 currentPosition=0 13:55:01 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:01 Filter is already there-color wheel unchanged 13:55:01 Received message from Master: op=Shutter serial=279091 13:55:01 Shutter LASER close 13:55:01 Received message from Camera: op=State serial=279093 13:55:01 GetSingleValue result=40 Value=cccccccc 13:55:01 SkyScan query 13:55:02 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:02 Parameters OK 13:55:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:02 Set A/D data flow result=40 13:55:02 Set A/D channel type result=40 13:55:02 Set A/D encoding result=40 13:55:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:02 Set channel filter=0.000000e+000 result=40 13:55:02 Config A/D Result=40 13:55:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:02 Get A/D filter: -9.255963e+061 result=40 13:55:02 Get A/D value=-858993460 result=40 13:55:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:02 Parameters OK 13:55:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:02 Set A/D data flow result=40 13:55:02 Set A/D channel type result=40 13:55:02 Set A/D encoding result=40 13:55:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:02 Set channel filter=0.000000e+000 result=40 13:55:02 Config A/D Result=40 13:55:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:02 Get A/D filter: -9.255963e+061 result=40 13:55:02 Get A/D value=-858993460 result=40 13:55:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:02 Aux= 13:55:02 Message to Camera, serial 279093 queued 13:55:39 Received message from Master: op=PointingHead serial=279106 13:55:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:55:39 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:55:39 Point started: ret=0 13:55:39 point_skyscan result=0 13:55:40 Check angles 13:55:40 SkyScan query 13:55:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:55:40 Message to Master queued w/err=0: serial=279106 error=0 13:55:45 Received message from Master: op=Filter serial=279107 13:55:45 Color wheel filter change from 0 to 0 13:55:45 FLIGetFilterPos err=0 currentPosition=0 13:55:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:45 Filter is already there-color wheel unchanged 13:55:45 Received message from Master: op=Shutter serial=279108 13:55:45 Shutter LASER close 13:55:45 Received message from Camera: op=State serial=279110 13:55:45 GetSingleValue result=40 Value=cccccccc 13:55:45 SkyScan query 13:55:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:55:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:46 Parameters OK 13:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:46 Set A/D data flow result=40 13:55:46 Set A/D channel type result=40 13:55:46 Set A/D encoding result=40 13:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:46 Set channel filter=0.000000e+000 result=40 13:55:46 Config A/D Result=40 13:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:46 Get A/D filter: -9.255963e+061 result=40 13:55:46 Get A/D value=-858993460 result=40 13:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:46 Parameters OK 13:55:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:46 Set A/D data flow result=40 13:55:46 Set A/D channel type result=40 13:55:46 Set A/D encoding result=40 13:55:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:46 Set channel filter=0.000000e+000 result=40 13:55:46 Config A/D Result=40 13:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:46 Get A/D filter: -9.255963e+061 result=40 13:55:46 Get A/D value=-858993460 result=40 13:55:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:46 Aux= 13:55:46 Message to Camera, serial 279110 queued 13:56:23 Received message from Master: op=PointingHead serial=279123 13:56:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:56:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:56:23 Point started: ret=0 13:56:23 point_skyscan result=0 13:56:24 Check angles 13:56:24 SkyScan query 13:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:25 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:56:25 Message to Master queued w/err=0: serial=279123 error=0 13:56:30 Received message from Master: op=Filter serial=279124 13:56:30 Color wheel filter change from 0 to 0 13:56:30 FLIGetFilterPos err=0 currentPosition=0 13:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:30 Filter is already there-color wheel unchanged 13:56:30 Received message from Master: op=Shutter serial=279125 13:56:30 Shutter LASER close 13:56:30 Received message from Camera: op=State serial=279127 13:56:30 GetSingleValue result=40 Value=cccccccc 13:56:30 SkyScan query 13:56:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:30 Parameters OK 13:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:30 Set A/D data flow result=40 13:56:30 Set A/D channel type result=40 13:56:30 Set A/D encoding result=40 13:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:30 Set channel filter=0.000000e+000 result=40 13:56:30 Config A/D Result=40 13:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:30 Get A/D filter: -9.255963e+061 result=40 13:56:30 Get A/D value=-858993460 result=40 13:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:30 Parameters OK 13:56:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:30 Set A/D data flow result=40 13:56:30 Set A/D channel type result=40 13:56:30 Set A/D encoding result=40 13:56:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:30 Set channel filter=0.000000e+000 result=40 13:56:30 Config A/D Result=40 13:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:30 Get A/D filter: -9.255963e+061 result=40 13:56:30 Get A/D value=-858993460 result=40 13:56:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:30 Aux= 13:56:30 Message to Camera, serial 279127 queued 13:57:07 Received message from Master: op=PointingHead serial=279140 13:57:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:57:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:57:07 Point started: ret=0 13:57:07 point_skyscan result=0 13:57:08 Check angles 13:57:08 SkyScan query 13:57:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 13:57:09 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 13:57:09 Check angles 13:57:09 SkyScan query 13:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.235<-14949 Statuses=0008 0009 13:57:10 Msec=750 True Az=112.995 Ze=-44.235 Az status=0008 Ze status=0009 13:57:10 Check angles 13:57:10 SkyScan query 13:57:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.16<-16344 Statuses=0008 0009 13:57:10 Msec=1500 True Az=112.995 Ze=-65.16 Az status=0008 Ze status=0009 13:57:10 Check angles 13:57:10 SkyScan query 13:57:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.1<-17740 Statuses=0008 0009 13:57:11 Msec=2250 True Az=112.995 Ze=-86.1 Az status=0008 Ze status=0009 13:57:11 Check angles 13:57:11 SkyScan query 13:57:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.505<-19167 Statuses=0008 0009 13:57:12 Msec=3000 True Az=112.995 Ze=-107.505 Az status=0008 Ze status=0009 13:57:12 Check angles 13:57:12 SkyScan query 13:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.445<-20563 Statuses=0008 0009 13:57:13 Msec=3750 True Az=112.995 Ze=-128.445 Az status=0008 Ze status=0009 13:57:13 Check angles 13:57:13 SkyScan query 13:57:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.445<-21963 Statuses=0008 0009 13:57:13 Msec=4500 True Az=112.995 Ze=-149.445 Az status=0008 Ze status=0009 13:57:13 Check angles 13:57:13 SkyScan query 13:57:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.385<-23359 Statuses=0008 0009 13:57:14 Msec=5250 True Az=112.995 Ze=-170.385 Az status=0008 Ze status=0009 13:57:14 Check angles 13:57:14 SkyScan query 13:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:57:15 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:57:15 Message to Master queued w/err=0: serial=279140 error=0 13:57:20 Received message from Master: op=Filter serial=279141 13:57:20 Color wheel filter change from 0 to 0 13:57:20 FLIGetFilterPos err=0 currentPosition=0 13:57:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:20 Filter is already there-color wheel unchanged 13:57:20 Received message from Master: op=Shutter serial=279142 13:57:20 Shutter LASER open 13:57:20 Received message from Camera: op=State serial=279144 13:57:20 GetSingleValue result=40 Value=cccccccc 13:57:20 SkyScan query 13:57:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:21 Parameters OK 13:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:21 Set A/D data flow result=40 13:57:21 Set A/D channel type result=40 13:57:21 Set A/D encoding result=40 13:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:21 Set channel filter=0.000000e+000 result=40 13:57:21 Config A/D Result=40 13:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:21 Get A/D filter: -9.255963e+061 result=40 13:57:21 Get A/D value=-858993460 result=40 13:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:21 Parameters OK 13:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:21 Set A/D data flow result=40 13:57:21 Set A/D channel type result=40 13:57:21 Set A/D encoding result=40 13:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:21 Set channel filter=0.000000e+000 result=40 13:57:21 Config A/D Result=40 13:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:21 Get A/D filter: -9.255963e+061 result=40 13:57:21 Get A/D value=-858993460 result=40 13:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:21 Aux= 13:57:21 Message to Camera, serial 279144 queued 13:57:29 Received message from Master: op=Shutter serial=279154 13:57:29 Shutter LASER close 13:57:30 Received message from Master: op=PointingHead serial=279158 13:57:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:57:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:57:30 Point started: ret=0 13:57:30 point_skyscan result=0 13:57:31 Check angles 13:57:31 SkyScan query 13:57:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.83<-21522 Statuses=0008 0009 13:57:31 Msec=0 True Az=112.995 Ze=-142.83 Az status=0008 Ze status=0009 13:57:32 Check angles 13:57:32 SkyScan query 13:57:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.935<-20129 Statuses=0008 0009 13:57:32 Msec=750 True Az=112.995 Ze=-121.935 Az status=0008 Ze status=0009 13:57:32 Check angles 13:57:32 SkyScan query 13:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.04<-18736 Statuses=0008 0009 13:57:33 Msec=1500 True Az=112.995 Ze=-101.04 Az status=0008 Ze status=0009 13:57:33 Check angles 13:57:33 SkyScan query 13:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.575<-17305 Statuses=0008 0009 13:57:34 Msec=2250 True Az=112.995 Ze=-79.575 Az status=0008 Ze status=0009 13:57:34 Check angles 13:57:34 SkyScan query 13:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.635<-15909 Statuses=0008 0009 13:57:34 Msec=3000 True Az=112.995 Ze=-58.635 Az status=0008 Ze status=0009 13:57:35 Check angles 13:57:35 SkyScan query 13:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.665<-14511 Statuses=0008 0009 13:57:35 Msec=3750 True Az=112.995 Ze=-37.665 Az status=0008 Ze status=0009 13:57:35 Check angles 13:57:35 SkyScan query 13:57:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.71<-13114 Statuses=0008 0009 13:57:36 Msec=4500 True Az=112.995 Ze=-16.71 Az status=0008 Ze status=0009 13:57:36 Check angles 13:57:36 SkyScan query 13:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=4.5<-11700 Statuses=0008 0009 13:57:37 Msec=5250 True Az=112.995 Ze=4.5 Az status=0008 Ze status=0009 13:57:37 Check angles 13:57:37 SkyScan query 13:57:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 13:57:37 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 13:57:37 Message to Master queued w/err=0: serial=279158 error=0 13:57:42 Received message from Master: op=Filter serial=279159 13:57:42 Color wheel filter change from 0 to 0 13:57:42 FLIGetFilterPos err=0 currentPosition=0 13:57:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:42 Filter is already there-color wheel unchanged 13:57:43 Received message from Master: op=Shutter serial=279160 13:57:43 Shutter LASER close 13:57:43 Received message from Camera: op=State serial=279162 13:57:43 GetSingleValue result=40 Value=cccccccc 13:57:43 SkyScan query 13:57:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:57:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:43 Parameters OK 13:57:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:43 Set A/D data flow result=40 13:57:43 Set A/D channel type result=40 13:57:43 Set A/D encoding result=40 13:57:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:43 Set channel filter=0.000000e+000 result=40 13:57:43 Config A/D Result=40 13:57:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:43 Get A/D filter: -9.255963e+061 result=40 13:57:43 Get A/D value=-858993460 result=40 13:57:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:43 Parameters OK 13:57:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:43 Set A/D data flow result=40 13:57:43 Set A/D channel type result=40 13:57:43 Set A/D encoding result=40 13:57:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:43 Set channel filter=0.000000e+000 result=40 13:57:43 Config A/D Result=40 13:57:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:43 Get A/D filter: -9.255963e+061 result=40 13:57:43 Get A/D value=-858993460 result=40 13:57:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:43 Aux= 13:57:43 Message to Camera, serial 279162 queued 13:58:20 Received message from Master: op=PointingHead serial=279175 13:58:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:58:20 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:58:21 Point started: ret=0 13:58:21 point_skyscan result=0 13:58:21 Check angles 13:58:21 SkyScan query 13:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:22 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:58:22 Message to Master queued w/err=0: serial=279175 error=0 13:58:27 Received message from Master: op=Filter serial=279176 13:58:27 Color wheel filter change from 0 to 0 13:58:27 FLIGetFilterPos err=0 currentPosition=0 13:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:27 Filter is already there-color wheel unchanged 13:58:27 Received message from Master: op=Shutter serial=279177 13:58:27 Shutter LASER close 13:58:27 Received message from Camera: op=State serial=279179 13:58:27 GetSingleValue result=40 Value=cccccccc 13:58:27 SkyScan query 13:58:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:28 Parameters OK 13:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:28 Set A/D data flow result=40 13:58:28 Set A/D channel type result=40 13:58:28 Set A/D encoding result=40 13:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:28 Set channel filter=0.000000e+000 result=40 13:58:28 Config A/D Result=40 13:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:28 Get A/D filter: -9.255963e+061 result=40 13:58:28 Get A/D value=-858993460 result=40 13:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:28 Parameters OK 13:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:28 Set A/D data flow result=40 13:58:28 Set A/D channel type result=40 13:58:28 Set A/D encoding result=40 13:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:28 Set channel filter=0.000000e+000 result=40 13:58:28 Config A/D Result=40 13:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:28 Get A/D filter: -9.255963e+061 result=40 13:58:28 Get A/D value=-858993460 result=40 13:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:28 Aux= 13:58:28 Message to Camera, serial 279179 queued 13:59:05 Received message from Master: op=PointingHead serial=279192 13:59:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 13:59:05 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 13:59:05 Point started: ret=0 13:59:05 point_skyscan result=0 13:59:06 Check angles 13:59:06 SkyScan query 13:59:06 SkyScan query done: ret=0 az=136.425<-9095 ze=-6.51<-12434 Statuses=0009 0008 13:59:06 Msec=0 True Az=136.425 Ze=-6.51 Az status=0009 Ze status=0008 13:59:06 Check angles 13:59:06 SkyScan query 13:59:07 SkyScan query done: ret=0 az=154.245<-10283 ze=-6.495<-12433 Statuses=0009 0008 13:59:07 Msec=750 True Az=154.245 Ze=-6.495 Az status=0009 Ze status=0008 13:59:07 Check angles 13:59:07 SkyScan query 13:59:08 SkyScan query done: ret=0 az=171.765<-11451 ze=-6.495<-12433 Statuses=0009 0008 13:59:08 Msec=1500 True Az=171.765 Ze=-6.495 Az status=0009 Ze status=0008 13:59:08 Check angles 13:59:08 SkyScan query 13:59:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 13:59:09 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 13:59:09 Message to Master queued w/err=0: serial=279192 error=0 13:59:14 Received message from Master: op=Filter serial=279193 13:59:14 Color wheel filter change from 0 to 0 13:59:14 FLIGetFilterPos err=0 currentPosition=0 13:59:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:14 Filter is already there-color wheel unchanged 13:59:14 Received message from Master: op=Shutter serial=279194 13:59:14 Shutter LASER close 13:59:14 Received message from Camera: op=State serial=279196 13:59:14 GetSingleValue result=40 Value=cccccccc 13:59:14 SkyScan query 13:59:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 13:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:14 Parameters OK 13:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:14 Set A/D data flow result=40 13:59:14 Set A/D channel type result=40 13:59:14 Set A/D encoding result=40 13:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:14 Set channel filter=0.000000e+000 result=40 13:59:14 Config A/D Result=40 13:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:14 Get A/D filter: -9.255963e+061 result=40 13:59:14 Get A/D value=-858993460 result=40 13:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:14 Parameters OK 13:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:14 Set A/D data flow result=40 13:59:14 Set A/D channel type result=40 13:59:14 Set A/D encoding result=40 13:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:14 Set channel filter=0.000000e+000 result=40 13:59:14 Config A/D Result=40 13:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:14 Get A/D filter: -9.255963e+061 result=40 13:59:14 Get A/D value=-858993460 result=40 13:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:14 Aux= 13:59:14 Message to Camera, serial 279196 queued 13:59:51 Received message from Master: op=PointingHead serial=279209 13:59:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 13:59:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 13:59:52 Point started: ret=0 13:59:52 point_skyscan result=0 13:59:52 Check angles 13:59:52 SkyScan query 13:59:53 SkyScan query done: ret=0 az=152.73<-10182 ze=6.51<-11566 Statuses=0009 0008 13:59:53 Msec=0 True Az=152.73 Ze=6.51 Az status=0009 Ze status=0008 13:59:53 Check angles 13:59:53 SkyScan query 13:59:54 SkyScan query done: ret=0 az=135.03<-9002 ze=6.495<-11567 Statuses=0009 0008 13:59:54 Msec=750 True Az=135.03 Ze=6.495 Az status=0009 Ze status=0008 13:59:54 Check angles 13:59:54 SkyScan query 13:59:54 SkyScan query done: ret=0 az=117.435<-7829 ze=6.495<-11567 Statuses=0009 0008 13:59:54 Msec=1500 True Az=117.435 Ze=6.495 Az status=0009 Ze status=0008 13:59:55 Check angles 13:59:55 SkyScan query 13:59:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 13:59:55 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 13:59:55 Message to Master queued w/err=0: serial=279209 error=0 14:00:00 Received message from Master: op=Filter serial=279210 14:00:00 Color wheel filter change from 0 to 0 14:00:00 FLIGetFilterPos err=0 currentPosition=0 14:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:00 Filter is already there-color wheel unchanged 14:00:00 Received message from Master: op=Shutter serial=279211 14:00:00 Shutter LASER close 14:00:00 Received message from Camera: op=State serial=279213 14:00:00 GetSingleValue result=40 Value=cccccccc 14:00:00 SkyScan query 14:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:00:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:01 Parameters OK 14:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:01 Set A/D data flow result=40 14:00:01 Set A/D channel type result=40 14:00:01 Set A/D encoding result=40 14:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:01 Set channel filter=0.000000e+000 result=40 14:00:01 Config A/D Result=40 14:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:01 Get A/D filter: -9.255963e+061 result=40 14:00:01 Get A/D value=-858993460 result=40 14:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:01 Parameters OK 14:00:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:01 Set A/D data flow result=40 14:00:01 Set A/D channel type result=40 14:00:01 Set A/D encoding result=40 14:00:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:01 Set channel filter=0.000000e+000 result=40 14:00:01 Config A/D Result=40 14:00:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:01 Get A/D filter: -9.255963e+061 result=40 14:00:01 Get A/D value=-858993460 result=40 14:00:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:01 Aux= 14:00:01 Message to Camera, serial 279213 queued 14:00:38 Received message from Master: op=PointingHead serial=279226 14:00:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:00:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:00:38 Point started: ret=0 14:00:38 point_skyscan result=0 14:00:39 Check angles 14:00:39 SkyScan query 14:00:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 14:00:39 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 14:00:40 Check angles 14:00:40 SkyScan query 14:00:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.385<-14959 Statuses=0008 0009 14:00:40 Msec=750 True Az=112.995 Ze=-44.385 Az status=0008 Ze status=0009 14:00:40 Check angles 14:00:40 SkyScan query 14:00:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.31<-16354 Statuses=0008 0009 14:00:41 Msec=1500 True Az=112.995 Ze=-65.31 Az status=0008 Ze status=0009 14:00:41 Check angles 14:00:41 SkyScan query 14:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.265<-17751 Statuses=0008 0009 14:00:42 Msec=2250 True Az=112.995 Ze=-86.265 Az status=0008 Ze status=0009 14:00:42 Check angles 14:00:42 SkyScan query 14:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.235<-19149 Statuses=0008 0009 14:00:42 Msec=3000 True Az=112.995 Ze=-107.235 Az status=0008 Ze status=0009 14:00:43 Check angles 14:00:43 SkyScan query 14:00:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.175<-20545 Statuses=0008 0009 14:00:43 Msec=3750 True Az=112.995 Ze=-128.175 Az status=0008 Ze status=0009 14:00:43 Check angles 14:00:43 SkyScan query 14:00:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.175<-21945 Statuses=0008 0009 14:00:44 Msec=4500 True Az=112.995 Ze=-149.175 Az status=0008 Ze status=0009 14:00:44 Check angles 14:00:44 SkyScan query 14:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.115<-23341 Statuses=0008 0009 14:00:45 Msec=5250 True Az=112.995 Ze=-170.115 Az status=0008 Ze status=0009 14:00:45 Check angles 14:00:45 SkyScan query 14:00:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:00:45 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:00:45 Message to Master queued w/err=0: serial=279226 error=0 14:00:50 Received message from Master: op=Filter serial=279227 14:00:50 Color wheel filter change from 0 to 0 14:00:50 FLIGetFilterPos err=0 currentPosition=0 14:00:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:50 Filter is already there-color wheel unchanged 14:00:51 Received message from Master: op=Shutter serial=279228 14:00:51 Shutter LASER open 14:00:51 Received message from Camera: op=State serial=279230 14:00:51 GetSingleValue result=40 Value=cccccccc 14:00:51 SkyScan query 14:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:00:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:51 Parameters OK 14:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:51 Set A/D data flow result=40 14:00:51 Set A/D channel type result=40 14:00:51 Set A/D encoding result=40 14:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:51 Set channel filter=0.000000e+000 result=40 14:00:51 Config A/D Result=40 14:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:51 Get A/D filter: -9.255963e+061 result=40 14:00:51 Get A/D value=-858993460 result=40 14:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:51 Parameters OK 14:00:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:51 Set A/D data flow result=40 14:00:51 Set A/D channel type result=40 14:00:51 Set A/D encoding result=40 14:00:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:51 Set channel filter=0.000000e+000 result=40 14:00:51 Config A/D Result=40 14:00:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:51 Get A/D filter: -9.255963e+061 result=40 14:00:51 Get A/D value=-858993460 result=40 14:00:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:51 Aux= 14:00:51 Message to Camera, serial 279230 queued 14:01:00 Received message from Master: op=Shutter serial=279240 14:01:00 Shutter LASER close 14:01:00 Received message from Master: op=PointingHead serial=279244 14:01:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:00 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:01 Point started: ret=0 14:01:01 point_skyscan result=0 14:01:01 Check angles 14:01:01 SkyScan query 14:01:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 14:01:02 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 14:01:02 Check angles 14:01:02 SkyScan query 14:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.725<-20115 Statuses=0008 0009 14:01:03 Msec=750 True Az=112.995 Ze=-121.725 Az status=0008 Ze status=0009 14:01:03 Check angles 14:01:03 SkyScan query 14:01:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.2<-18680 Statuses=0008 0009 14:01:03 Msec=1500 True Az=112.995 Ze=-100.2 Az status=0008 Ze status=0009 14:01:04 Check angles 14:01:04 SkyScan query 14:01:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.35<-17290 Statuses=0008 0009 14:01:04 Msec=2250 True Az=112.995 Ze=-79.35 Az status=0008 Ze status=0009 14:01:04 Check angles 14:01:04 SkyScan query 14:01:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.395<-15893 Statuses=0008 0009 14:01:05 Msec=3000 True Az=112.995 Ze=-58.395 Az status=0008 Ze status=0009 14:01:05 Check angles 14:01:05 SkyScan query 14:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.47<-14498 Statuses=0008 0009 14:01:06 Msec=3750 True Az=112.995 Ze=-37.47 Az status=0008 Ze status=0009 14:01:06 Check angles 14:01:06 SkyScan query 14:01:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.5<-13100 Statuses=0008 0009 14:01:06 Msec=4500 True Az=112.995 Ze=-16.5 Az status=0008 Ze status=0009 14:01:07 Check angles 14:01:07 SkyScan query 14:01:07 SkyScan query done: ret=0 az=113.01<-7534 ze=4.35<-11710 Statuses=0008 0009 14:01:07 Msec=5250 True Az=113.01 Ze=4.35 Az status=0008 Ze status=0009 14:01:07 Check angles 14:01:07 SkyScan query 14:01:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:01:08 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:01:08 Message to Master queued w/err=0: serial=279244 error=0 14:01:13 Received message from Master: op=Filter serial=279245 14:01:13 Color wheel filter change from 0 to 0 14:01:13 FLIGetFilterPos err=0 currentPosition=0 14:01:13 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:13 Filter is already there-color wheel unchanged 14:01:13 Received message from Master: op=Shutter serial=279246 14:01:13 Shutter LASER close 14:01:13 Received message from Camera: op=State serial=279248 14:01:13 GetSingleValue result=40 Value=cccccccc 14:01:13 SkyScan query 14:01:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:14 Parameters OK 14:01:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:14 Set A/D data flow result=40 14:01:14 Set A/D channel type result=40 14:01:14 Set A/D encoding result=40 14:01:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:14 Set channel filter=0.000000e+000 result=40 14:01:14 Config A/D Result=40 14:01:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:14 Get A/D filter: -9.255963e+061 result=40 14:01:14 Get A/D value=-858993460 result=40 14:01:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:14 Parameters OK 14:01:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:14 Set A/D data flow result=40 14:01:14 Set A/D channel type result=40 14:01:14 Set A/D encoding result=40 14:01:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:14 Set channel filter=0.000000e+000 result=40 14:01:14 Config A/D Result=40 14:01:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:14 Get A/D filter: -9.255963e+061 result=40 14:01:14 Get A/D value=-858993460 result=40 14:01:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:14 Aux= 14:01:14 Message to Camera, serial 279248 queued 14:01:51 Received message from Master: op=PointingHead serial=279261 14:01:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:01:51 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:01:51 Point started: ret=0 14:01:51 point_skyscan result=0 14:01:52 Check angles 14:01:52 SkyScan query 14:01:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:52 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:01:52 Message to Master queued w/err=0: serial=279261 error=0 14:01:57 Received message from Master: op=Filter serial=279262 14:01:57 Color wheel filter change from 0 to 0 14:01:57 FLIGetFilterPos err=0 currentPosition=0 14:01:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:57 Filter is already there-color wheel unchanged 14:01:58 Received message from Master: op=Shutter serial=279263 14:01:58 Shutter LASER close 14:01:58 Received message from Camera: op=State serial=279265 14:01:58 GetSingleValue result=40 Value=cccccccc 14:01:58 SkyScan query 14:01:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:01:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:58 Parameters OK 14:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:58 Set A/D data flow result=40 14:01:58 Set A/D channel type result=40 14:01:58 Set A/D encoding result=40 14:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:58 Set channel filter=0.000000e+000 result=40 14:01:58 Config A/D Result=40 14:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:58 Get A/D filter: -9.255963e+061 result=40 14:01:58 Get A/D value=-858993460 result=40 14:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:58 Parameters OK 14:01:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:58 Set A/D data flow result=40 14:01:58 Set A/D channel type result=40 14:01:58 Set A/D encoding result=40 14:01:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:58 Set channel filter=0.000000e+000 result=40 14:01:58 Config A/D Result=40 14:01:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:58 Get A/D filter: -9.255963e+061 result=40 14:01:58 Get A/D value=-858993460 result=40 14:01:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:58 Aux= 14:01:58 Message to Camera, serial 279265 queued 14:02:35 Received message from Master: op=PointingHead serial=279278 14:02:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:02:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:02:35 Point started: ret=0 14:02:35 point_skyscan result=0 14:02:36 Check angles 14:02:36 SkyScan query 14:02:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:02:37 Message to Master queued w/err=0: serial=279278 error=0 14:02:42 Received message from Master: op=Filter serial=279279 14:02:42 Color wheel filter change from 0 to 0 14:02:42 FLIGetFilterPos err=0 currentPosition=0 14:02:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:42 Filter is already there-color wheel unchanged 14:02:42 Received message from Master: op=Shutter serial=279280 14:02:42 Shutter LASER close 14:02:42 Received message from Camera: op=State serial=279282 14:02:42 GetSingleValue result=40 Value=cccccccc 14:02:42 SkyScan query 14:02:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:02:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:42 Parameters OK 14:02:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:42 Set A/D data flow result=40 14:02:42 Set A/D channel type result=40 14:02:42 Set A/D encoding result=40 14:02:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:42 Set channel filter=0.000000e+000 result=40 14:02:42 Config A/D Result=40 14:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:42 Get A/D filter: -9.255963e+061 result=40 14:02:42 Get A/D value=-858993460 result=40 14:02:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:42 Parameters OK 14:02:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:42 Set A/D data flow result=40 14:02:42 Set A/D channel type result=40 14:02:42 Set A/D encoding result=40 14:02:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:42 Set channel filter=0.000000e+000 result=40 14:02:42 Config A/D Result=40 14:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:42 Get A/D filter: -9.255963e+061 result=40 14:02:42 Get A/D value=-858993460 result=40 14:02:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:42 Aux= 14:02:42 Message to Camera, serial 279282 queued 14:03:19 Received message from Master: op=PointingHead serial=279295 14:03:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:03:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:03:20 Point started: ret=0 14:03:20 point_skyscan result=0 14:03:20 Check angles 14:03:20 SkyScan query 14:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:03:21 Message to Master queued w/err=0: serial=279295 error=0 14:03:26 Received message from Master: op=Filter serial=279296 14:03:26 Color wheel filter change from 0 to 0 14:03:26 FLIGetFilterPos err=0 currentPosition=0 14:03:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:26 Filter is already there-color wheel unchanged 14:03:26 Received message from Master: op=Shutter serial=279297 14:03:26 Shutter LASER close 14:03:26 Received message from Camera: op=State serial=279299 14:03:26 GetSingleValue result=40 Value=cccccccc 14:03:26 SkyScan query 14:03:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:03:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:27 Parameters OK 14:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:27 Set A/D data flow result=40 14:03:27 Set A/D channel type result=40 14:03:27 Set A/D encoding result=40 14:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:27 Set channel filter=0.000000e+000 result=40 14:03:27 Config A/D Result=40 14:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:27 Get A/D filter: -9.255963e+061 result=40 14:03:27 Get A/D value=-858993460 result=40 14:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:27 Parameters OK 14:03:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:27 Set A/D data flow result=40 14:03:27 Set A/D channel type result=40 14:03:27 Set A/D encoding result=40 14:03:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:27 Set channel filter=0.000000e+000 result=40 14:03:27 Config A/D Result=40 14:03:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:27 Get A/D filter: -9.255963e+061 result=40 14:03:27 Get A/D value=-858993460 result=40 14:03:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:27 Aux= 14:03:27 Message to Camera, serial 279299 queued 14:03:35 Received message from Master: op=Identify serial=279300 [UTC 2019-3-14 14:03:48] 14:04:03 Received message from Master: op=PointingHead serial=279314 14:04:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:04:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:04:03 Point started: ret=0 14:04:03 point_skyscan result=0 14:04:04 Check angles 14:04:04 SkyScan query 14:04:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.205<-13547 Statuses=0008 0009 14:04:04 Msec=0 True Az=112.995 Ze=-23.205 Az status=0008 Ze status=0009 14:04:05 Check angles 14:04:05 SkyScan query 14:04:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.565<-14971 Statuses=0008 0009 14:04:05 Msec=750 True Az=112.995 Ze=-44.565 Az status=0008 Ze status=0009 14:04:05 Check angles 14:04:05 SkyScan query 14:04:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.505<-16367 Statuses=0008 0009 14:04:06 Msec=1500 True Az=112.995 Ze=-65.505 Az status=0008 Ze status=0009 14:04:06 Check angles 14:04:06 SkyScan query 14:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.475<-17765 Statuses=0008 0009 14:04:07 Msec=2250 True Az=112.995 Ze=-86.475 Az status=0008 Ze status=0009 14:04:07 Check angles 14:04:07 SkyScan query 14:04:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.895<-19193 Statuses=0008 0009 14:04:07 Msec=3000 True Az=112.995 Ze=-107.895 Az status=0008 Ze status=0009 14:04:08 Check angles 14:04:08 SkyScan query 14:04:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 14:04:08 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 14:04:08 Check angles 14:04:08 SkyScan query 14:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.82<-21988 Statuses=0008 0009 14:04:09 Msec=4500 True Az=112.995 Ze=-149.82 Az status=0008 Ze status=0009 14:04:09 Check angles 14:04:09 SkyScan query 14:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.015<-23401 Statuses=0008 0009 14:04:10 Msec=5250 True Az=112.995 Ze=-171.015 Az status=0008 Ze status=0009 14:04:10 Check angles 14:04:10 SkyScan query 14:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:04:10 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:04:10 Message to Master queued w/err=0: serial=279314 error=0 14:04:15 Received message from Master: op=Filter serial=279315 14:04:15 Color wheel filter change from 0 to 0 14:04:15 FLIGetFilterPos err=0 currentPosition=0 14:04:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:15 Filter is already there-color wheel unchanged 14:04:16 Received message from Master: op=Shutter serial=279316 14:04:16 Shutter LASER open 14:04:16 Received message from Camera: op=State serial=279318 14:04:16 GetSingleValue result=40 Value=cccccccc 14:04:16 SkyScan query 14:04:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:04:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:16 Parameters OK 14:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:16 Set A/D data flow result=40 14:04:16 Set A/D channel type result=40 14:04:16 Set A/D encoding result=40 14:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:16 Set channel filter=0.000000e+000 result=40 14:04:16 Config A/D Result=40 14:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:16 Get A/D filter: -9.255963e+061 result=40 14:04:16 Get A/D value=-858993460 result=40 14:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:16 Parameters OK 14:04:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:16 Set A/D data flow result=40 14:04:16 Set A/D channel type result=40 14:04:16 Set A/D encoding result=40 14:04:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:16 Set channel filter=0.000000e+000 result=40 14:04:16 Config A/D Result=40 14:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:16 Get A/D filter: -9.255963e+061 result=40 14:04:16 Get A/D value=-858993460 result=40 14:04:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:16 Aux= 14:04:16 Message to Camera, serial 279318 queued 14:04:25 Received message from Master: op=Shutter serial=279328 14:04:25 Shutter LASER close 14:04:25 Received message from Master: op=PointingHead serial=279332 14:04:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:04:25 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:04:26 Point started: ret=0 14:04:26 point_skyscan result=0 14:04:26 Check angles 14:04:26 SkyScan query 14:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.295<-21553 Statuses=0008 0009 14:04:27 Msec=0 True Az=112.995 Ze=-143.295 Az status=0008 Ze status=0009 14:04:27 Check angles 14:04:27 SkyScan query 14:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.355<-20157 Statuses=0008 0009 14:04:28 Msec=750 True Az=112.995 Ze=-122.355 Az status=0008 Ze status=0009 14:04:28 Check angles 14:04:28 SkyScan query 14:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.415<-18761 Statuses=0008 0009 14:04:28 Msec=1500 True Az=112.995 Ze=-101.415 Az status=0008 Ze status=0009 14:04:29 Check angles 14:04:29 SkyScan query 14:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.98<-17332 Statuses=0008 0009 14:04:29 Msec=2250 True Az=112.995 Ze=-79.98 Az status=0008 Ze status=0009 14:04:29 Check angles 14:04:29 SkyScan query 14:04:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.025<-15935 Statuses=0008 0009 14:04:30 Msec=3000 True Az=112.995 Ze=-59.025 Az status=0008 Ze status=0009 14:04:30 Check angles 14:04:30 SkyScan query 14:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.025<-14535 Statuses=0008 0009 14:04:31 Msec=3750 True Az=112.995 Ze=-38.025 Az status=0008 Ze status=0009 14:04:31 Check angles 14:04:31 SkyScan query 14:04:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.65<-13110 Statuses=0008 0009 14:04:31 Msec=4500 True Az=112.995 Ze=-16.65 Az status=0008 Ze status=0009 14:04:32 Check angles 14:04:32 SkyScan query 14:04:32 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 14:04:32 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 14:04:32 Check angles 14:04:32 SkyScan query 14:04:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:04:33 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:04:33 Message to Master queued w/err=0: serial=279332 error=0 14:04:38 Received message from Master: op=Filter serial=279333 14:04:38 Color wheel filter change from 0 to 0 14:04:38 FLIGetFilterPos err=0 currentPosition=0 14:04:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:38 Filter is already there-color wheel unchanged 14:04:38 Received message from Master: op=Shutter serial=279334 14:04:38 Shutter LASER close 14:04:38 Received message from Camera: op=State serial=279336 14:04:38 GetSingleValue result=40 Value=cccccccc 14:04:38 SkyScan query 14:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:04:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:39 Parameters OK 14:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:39 Set A/D data flow result=40 14:04:39 Set A/D channel type result=40 14:04:39 Set A/D encoding result=40 14:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:39 Set channel filter=0.000000e+000 result=40 14:04:39 Config A/D Result=40 14:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:39 Get A/D filter: -9.255963e+061 result=40 14:04:39 Get A/D value=-858993460 result=40 14:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:39 Parameters OK 14:04:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:39 Set A/D data flow result=40 14:04:39 Set A/D channel type result=40 14:04:39 Set A/D encoding result=40 14:04:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:39 Set channel filter=0.000000e+000 result=40 14:04:39 Config A/D Result=40 14:04:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:39 Get A/D filter: -9.255963e+061 result=40 14:04:39 Get A/D value=-858993460 result=40 14:04:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:39 Aux= 14:04:39 Message to Camera, serial 279336 queued 14:05:16 Received message from Master: op=PointingHead serial=279349 14:05:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:05:16 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:05:16 Point started: ret=0 14:05:16 point_skyscan result=0 14:05:17 Check angles 14:05:17 SkyScan query 14:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:05:17 Message to Master queued w/err=0: serial=279349 error=0 14:05:22 Received message from Master: op=Filter serial=279350 14:05:22 Color wheel filter change from 0 to 0 14:05:22 FLIGetFilterPos err=0 currentPosition=0 14:05:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:22 Filter is already there-color wheel unchanged 14:05:23 Received message from Master: op=Shutter serial=279351 14:05:23 Shutter LASER close 14:05:23 Received message from Camera: op=State serial=279353 14:05:23 GetSingleValue result=40 Value=cccccccc 14:05:23 SkyScan query 14:05:23 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:05:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:23 Parameters OK 14:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:23 Set A/D data flow result=40 14:05:23 Set A/D channel type result=40 14:05:23 Set A/D encoding result=40 14:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:23 Set channel filter=0.000000e+000 result=40 14:05:23 Config A/D Result=40 14:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:23 Get A/D filter: -9.255963e+061 result=40 14:05:23 Get A/D value=-858993460 result=40 14:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:23 Parameters OK 14:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:23 Set A/D data flow result=40 14:05:23 Set A/D channel type result=40 14:05:23 Set A/D encoding result=40 14:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:23 Set channel filter=0.000000e+000 result=40 14:05:23 Config A/D Result=40 14:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:23 Get A/D filter: -9.255963e+061 result=40 14:05:23 Get A/D value=-858993460 result=40 14:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:23 Aux= 14:05:23 Message to Camera, serial 279353 queued 14:06:00 Received message from Master: op=PointingHead serial=279366 14:06:00 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:06:00 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:06:00 Point started: ret=0 14:06:00 point_skyscan result=0 14:06:01 Check angles 14:06:01 SkyScan query 14:06:02 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 14:06:02 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 14:06:02 Check angles 14:06:02 SkyScan query 14:06:02 SkyScan query done: ret=0 az=153.66<-10244 ze=-6.495<-12433 Statuses=0009 0008 14:06:02 Msec=750 True Az=153.66 Ze=-6.495 Az status=0009 Ze status=0008 14:06:03 Check angles 14:06:03 SkyScan query 14:06:03 SkyScan query done: ret=0 az=171.12<-11408 ze=-6.495<-12433 Statuses=0009 0008 14:06:03 Msec=1500 True Az=171.12 Ze=-6.495 Az status=0009 Ze status=0008 14:06:03 Check angles 14:06:03 SkyScan query 14:06:04 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 14:06:04 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 14:06:04 Message to Master queued w/err=0: serial=279366 error=0 14:06:09 Received message from Master: op=Filter serial=279367 14:06:09 Color wheel filter change from 0 to 0 14:06:09 FLIGetFilterPos err=0 currentPosition=0 14:06:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:09 Filter is already there-color wheel unchanged 14:06:09 Received message from Master: op=Shutter serial=279368 14:06:09 Shutter LASER close 14:06:09 Received message from Camera: op=State serial=279370 14:06:09 GetSingleValue result=40 Value=cccccccc 14:06:09 SkyScan query 14:06:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:06:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:10 Parameters OK 14:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:10 Set A/D data flow result=40 14:06:10 Set A/D channel type result=40 14:06:10 Set A/D encoding result=40 14:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:10 Set channel filter=0.000000e+000 result=40 14:06:10 Config A/D Result=40 14:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:10 Get A/D filter: -9.255963e+061 result=40 14:06:10 Get A/D value=-858993460 result=40 14:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:10 Parameters OK 14:06:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:10 Set A/D data flow result=40 14:06:10 Set A/D channel type result=40 14:06:10 Set A/D encoding result=40 14:06:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:10 Set channel filter=0.000000e+000 result=40 14:06:10 Config A/D Result=40 14:06:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:10 Get A/D filter: -9.255963e+061 result=40 14:06:10 Get A/D value=-858993460 result=40 14:06:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:10 Aux= 14:06:10 Message to Camera, serial 279370 queued 14:06:47 Received message from Master: op=PointingHead serial=279383 14:06:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:06:47 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:06:47 Point started: ret=0 14:06:47 point_skyscan result=0 14:06:48 Check angles 14:06:48 SkyScan query 14:06:48 SkyScan query done: ret=0 az=152.67<-10178 ze=6.51<-11566 Statuses=0009 0008 14:06:48 Msec=0 True Az=152.67 Ze=6.51 Az status=0009 Ze status=0008 14:06:48 Check angles 14:06:48 SkyScan query 14:06:49 SkyScan query done: ret=0 az=135.225<-9015 ze=6.495<-11567 Statuses=0009 0008 14:06:49 Msec=750 True Az=135.225 Ze=6.495 Az status=0009 Ze status=0008 14:06:49 Check angles 14:06:49 SkyScan query 14:06:50 SkyScan query done: ret=0 az=117.735<-7849 ze=6.495<-11567 Statuses=0009 0008 14:06:50 Msec=1500 True Az=117.735 Ze=6.495 Az status=0009 Ze status=0008 14:06:50 Check angles 14:06:50 SkyScan query 14:06:51 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:51 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:06:51 Message to Master queued w/err=0: serial=279383 error=0 14:06:56 Received message from Master: op=Filter serial=279384 14:06:56 Color wheel filter change from 0 to 0 14:06:56 FLIGetFilterPos err=0 currentPosition=0 14:06:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:56 Filter is already there-color wheel unchanged 14:06:56 Received message from Master: op=Shutter serial=279385 14:06:56 Shutter LASER close 14:06:56 Received message from Camera: op=State serial=279387 14:06:56 GetSingleValue result=40 Value=cccccccc 14:06:56 SkyScan query 14:06:56 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:06:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:56 Parameters OK 14:06:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:56 Set A/D data flow result=40 14:06:56 Set A/D channel type result=40 14:06:56 Set A/D encoding result=40 14:06:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:56 Set channel filter=0.000000e+000 result=40 14:06:56 Config A/D Result=40 14:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:56 Get A/D filter: -9.255963e+061 result=40 14:06:56 Get A/D value=-858993460 result=40 14:06:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:56 Parameters OK 14:06:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:56 Set A/D data flow result=40 14:06:56 Set A/D channel type result=40 14:06:56 Set A/D encoding result=40 14:06:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:56 Set channel filter=0.000000e+000 result=40 14:06:56 Config A/D Result=40 14:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:56 Get A/D filter: -9.255963e+061 result=40 14:06:56 Get A/D value=-858993460 result=40 14:06:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:56 Aux= 14:06:56 Message to Camera, serial 279387 queued 14:07:33 Received message from Master: op=PointingHead serial=279400 14:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:07:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:07:34 Point started: ret=0 14:07:34 point_skyscan result=0 14:07:34 Check angles 14:07:34 SkyScan query 14:07:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.805<-13587 Statuses=0008 0009 14:07:35 Msec=0 True Az=112.995 Ze=-23.805 Az status=0008 Ze status=0009 14:07:35 Check angles 14:07:35 SkyScan query 14:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.745<-14983 Statuses=0008 0009 14:07:36 Msec=750 True Az=112.995 Ze=-44.745 Az status=0008 Ze status=0009 14:07:36 Check angles 14:07:36 SkyScan query 14:07:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.285<-16419 Statuses=0008 0009 14:07:36 Msec=1500 True Az=112.995 Ze=-66.285 Az status=0008 Ze status=0009 14:07:37 Check angles 14:07:37 SkyScan query 14:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.15<-17810 Statuses=0008 0009 14:07:37 Msec=2250 True Az=112.995 Ze=-87.15 Az status=0008 Ze status=0009 14:07:37 Check angles 14:07:37 SkyScan query 14:07:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.105<-19207 Statuses=0008 0009 14:07:38 Msec=3000 True Az=112.995 Ze=-108.105 Az status=0008 Ze status=0009 14:07:38 Check angles 14:07:38 SkyScan query 14:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.03<-20602 Statuses=0008 0009 14:07:39 Msec=3750 True Az=112.995 Ze=-129.03 Az status=0008 Ze status=0009 14:07:39 Check angles 14:07:39 SkyScan query 14:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-150<-22000 Statuses=0008 0009 14:07:39 Msec=4500 True Az=112.995 Ze=-150 Az status=0008 Ze status=0009 14:07:40 Check angles 14:07:40 SkyScan query 14:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.865<-23391 Statuses=0008 0009 14:07:40 Msec=5250 True Az=112.995 Ze=-170.865 Az status=0008 Ze status=0009 14:07:40 Check angles 14:07:40 SkyScan query 14:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:07:41 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:07:41 Message to Master queued w/err=0: serial=279400 error=0 14:07:46 Received message from Master: op=Filter serial=279401 14:07:46 Color wheel filter change from 0 to 0 14:07:46 FLIGetFilterPos err=0 currentPosition=0 14:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:46 Filter is already there-color wheel unchanged 14:07:46 Received message from Master: op=Shutter serial=279402 14:07:46 Shutter LASER open 14:07:46 Received message from Camera: op=State serial=279404 14:07:46 GetSingleValue result=40 Value=cccccccc 14:07:46 SkyScan query 14:07:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:47 Parameters OK 14:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:47 Set A/D data flow result=40 14:07:47 Set A/D channel type result=40 14:07:47 Set A/D encoding result=40 14:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:47 Set channel filter=0.000000e+000 result=40 14:07:47 Config A/D Result=40 14:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:47 Get A/D filter: -9.255963e+061 result=40 14:07:47 Get A/D value=-858993460 result=40 14:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:47 Parameters OK 14:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:47 Set A/D data flow result=40 14:07:47 Set A/D channel type result=40 14:07:47 Set A/D encoding result=40 14:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:47 Set channel filter=0.000000e+000 result=40 14:07:47 Config A/D Result=40 14:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:47 Get A/D filter: -9.255963e+061 result=40 14:07:47 Get A/D value=-858993460 result=40 14:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:47 Aux= 14:07:47 Message to Camera, serial 279404 queued 14:07:55 Received message from Master: op=Shutter serial=279414 14:07:55 Shutter LASER close 14:07:56 Received message from Master: op=PointingHead serial=279418 14:07:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:07:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:07:56 Point started: ret=0 14:07:56 point_skyscan result=0 14:07:57 Check angles 14:07:57 SkyScan query 14:07:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.785<-21519 Statuses=0008 0009 14:07:57 Msec=0 True Az=112.995 Ze=-142.785 Az status=0008 Ze status=0009 14:07:58 Check angles 14:07:58 SkyScan query 14:07:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.785<-20119 Statuses=0008 0009 14:07:58 Msec=750 True Az=112.995 Ze=-121.785 Az status=0008 Ze status=0009 14:07:58 Check angles 14:07:58 SkyScan query 14:07:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.875<-18725 Statuses=0008 0009 14:07:59 Msec=1500 True Az=112.995 Ze=-100.875 Az status=0008 Ze status=0009 14:07:59 Check angles 14:07:59 SkyScan query 14:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.41<-17294 Statuses=0008 0009 14:08:00 Msec=2250 True Az=112.995 Ze=-79.41 Az status=0008 Ze status=0009 14:08:00 Check angles 14:08:00 SkyScan query 14:08:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.455<-15897 Statuses=0008 0009 14:08:00 Msec=3000 True Az=112.995 Ze=-58.455 Az status=0008 Ze status=0009 14:08:01 Check angles 14:08:01 SkyScan query 14:08:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.14<-14476 Statuses=0008 0009 14:08:01 Msec=3750 True Az=112.995 Ze=-37.14 Az status=0008 Ze status=0009 14:08:01 Check angles 14:08:01 SkyScan query 14:08:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.155<-13077 Statuses=0008 0009 14:08:02 Msec=4500 True Az=112.995 Ze=-16.155 Az status=0008 Ze status=0009 14:08:02 Check angles 14:08:02 SkyScan query 14:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=4.62<-11692 Statuses=0008 0009 14:08:03 Msec=5250 True Az=112.995 Ze=4.62 Az status=0008 Ze status=0009 14:08:03 Check angles 14:08:03 SkyScan query 14:08:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:08:03 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:08:03 Message to Master queued w/err=0: serial=279418 error=0 14:08:08 Received message from Master: op=Filter serial=279419 14:08:08 Color wheel filter change from 0 to 0 14:08:08 FLIGetFilterPos err=0 currentPosition=0 14:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:08 Filter is already there-color wheel unchanged 14:08:09 Received message from Master: op=Shutter serial=279420 14:08:09 Shutter LASER close 14:08:09 Received message from Camera: op=State serial=279422 14:08:09 GetSingleValue result=40 Value=cccccccc 14:08:09 SkyScan query 14:08:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:09 Parameters OK 14:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:09 Set A/D data flow result=40 14:08:09 Set A/D channel type result=40 14:08:09 Set A/D encoding result=40 14:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:09 Set channel filter=0.000000e+000 result=40 14:08:09 Config A/D Result=40 14:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:09 Get A/D filter: -9.255963e+061 result=40 14:08:09 Get A/D value=-858993460 result=40 14:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:09 Parameters OK 14:08:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:09 Set A/D data flow result=40 14:08:09 Set A/D channel type result=40 14:08:09 Set A/D encoding result=40 14:08:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:09 Set channel filter=0.000000e+000 result=40 14:08:09 Config A/D Result=40 14:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:09 Get A/D filter: -9.255963e+061 result=40 14:08:09 Get A/D value=-858993460 result=40 14:08:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:09 Aux= 14:08:09 Message to Camera, serial 279422 queued 14:08:46 Received message from Master: op=PointingHead serial=279435 14:08:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:08:46 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:08:47 Point started: ret=0 14:08:47 point_skyscan result=0 14:08:47 Check angles 14:08:47 SkyScan query 14:08:48 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:48 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:08:48 Message to Master queued w/err=0: serial=279435 error=0 14:08:53 Received message from Master: op=Filter serial=279436 14:08:53 Color wheel filter change from 0 to 0 14:08:53 FLIGetFilterPos err=0 currentPosition=0 14:08:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:53 Filter is already there-color wheel unchanged 14:08:53 Received message from Master: op=Shutter serial=279437 14:08:53 Shutter LASER close 14:08:53 Received message from Camera: op=State serial=279439 14:08:53 GetSingleValue result=40 Value=cccccccc 14:08:53 SkyScan query 14:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:08:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:54 Parameters OK 14:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:54 Set A/D data flow result=40 14:08:54 Set A/D channel type result=40 14:08:54 Set A/D encoding result=40 14:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:54 Set channel filter=0.000000e+000 result=40 14:08:54 Config A/D Result=40 14:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:54 Get A/D filter: -9.255963e+061 result=40 14:08:54 Get A/D value=-858993460 result=40 14:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:54 Parameters OK 14:08:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:54 Set A/D data flow result=40 14:08:54 Set A/D channel type result=40 14:08:54 Set A/D encoding result=40 14:08:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:54 Set channel filter=0.000000e+000 result=40 14:08:54 Config A/D Result=40 14:08:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:54 Get A/D filter: -9.255963e+061 result=40 14:08:54 Get A/D value=-858993460 result=40 14:08:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:54 Aux= 14:08:54 Message to Camera, serial 279439 queued 14:09:31 Received message from Master: op=PointingHead serial=279452 14:09:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:09:31 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:09:31 Point started: ret=0 14:09:31 point_skyscan result=0 14:09:32 Check angles 14:09:32 SkyScan query 14:09:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:09:32 Message to Master queued w/err=0: serial=279452 error=0 14:09:37 Received message from Master: op=Filter serial=279453 14:09:37 Color wheel filter change from 0 to 0 14:09:37 FLIGetFilterPos err=0 currentPosition=0 14:09:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:37 Filter is already there-color wheel unchanged 14:09:37 Received message from Master: op=Shutter serial=279454 14:09:37 Shutter LASER close 14:09:38 Received message from Camera: op=State serial=279456 14:09:38 GetSingleValue result=40 Value=cccccccc 14:09:38 SkyScan query 14:09:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:38 Parameters OK 14:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:38 Set A/D data flow result=40 14:09:38 Set A/D channel type result=40 14:09:38 Set A/D encoding result=40 14:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:38 Set channel filter=0.000000e+000 result=40 14:09:38 Config A/D Result=40 14:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:38 Get A/D filter: -9.255963e+061 result=40 14:09:38 Get A/D value=-858993460 result=40 14:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:38 Parameters OK 14:09:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:38 Set A/D data flow result=40 14:09:38 Set A/D channel type result=40 14:09:38 Set A/D encoding result=40 14:09:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:38 Set channel filter=0.000000e+000 result=40 14:09:38 Config A/D Result=40 14:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:38 Get A/D filter: -9.255963e+061 result=40 14:09:38 Get A/D value=-858993460 result=40 14:09:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:38 Aux= 14:09:38 Message to Camera, serial 279456 queued 14:10:15 Received message from Master: op=PointingHead serial=279469 14:10:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:10:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:10:15 Point started: ret=0 14:10:15 point_skyscan result=0 14:10:16 Check angles 14:10:16 SkyScan query 14:10:17 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:17 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:10:17 Message to Master queued w/err=0: serial=279469 error=0 14:10:22 Received message from Master: op=Filter serial=279470 14:10:22 Color wheel filter change from 0 to 0 14:10:22 FLIGetFilterPos err=0 currentPosition=0 14:10:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:22 Filter is already there-color wheel unchanged 14:10:22 Received message from Master: op=Shutter serial=279471 14:10:22 Shutter LASER close 14:10:22 Received message from Camera: op=State serial=279473 14:10:22 GetSingleValue result=40 Value=cccccccc 14:10:22 SkyScan query 14:10:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:22 Parameters OK 14:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:22 Set A/D data flow result=40 14:10:22 Set A/D channel type result=40 14:10:22 Set A/D encoding result=40 14:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:22 Set channel filter=0.000000e+000 result=40 14:10:22 Config A/D Result=40 14:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:22 Get A/D filter: -9.255963e+061 result=40 14:10:22 Get A/D value=-858993460 result=40 14:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:22 Parameters OK 14:10:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:22 Set A/D data flow result=40 14:10:22 Set A/D channel type result=40 14:10:22 Set A/D encoding result=40 14:10:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:22 Set channel filter=0.000000e+000 result=40 14:10:22 Config A/D Result=40 14:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:22 Get A/D filter: -9.255963e+061 result=40 14:10:22 Get A/D value=-858993460 result=40 14:10:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:22 Aux= 14:10:22 Message to Camera, serial 279473 queued 14:10:59 Received message from Master: op=PointingHead serial=279486 14:10:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:10:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:11:00 Point started: ret=0 14:11:00 point_skyscan result=0 14:11:00 Check angles 14:11:00 SkyScan query 14:11:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.355<-13557 Statuses=0008 0009 14:11:01 Msec=0 True Az=112.995 Ze=-23.355 Az status=0008 Ze status=0009 14:11:01 Check angles 14:11:01 SkyScan query 14:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.715<-14981 Statuses=0008 0009 14:11:02 Msec=750 True Az=112.995 Ze=-44.715 Az status=0008 Ze status=0009 14:11:02 Check angles 14:11:02 SkyScan query 14:11:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.12<-16408 Statuses=0008 0009 14:11:02 Msec=1500 True Az=112.995 Ze=-66.12 Az status=0008 Ze status=0009 14:11:03 Check angles 14:11:03 SkyScan query 14:11:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.105<-17807 Statuses=0008 0009 14:11:03 Msec=2250 True Az=112.995 Ze=-87.105 Az status=0008 Ze status=0009 14:11:03 Check angles 14:11:03 SkyScan query 14:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.06<-19204 Statuses=0008 0009 14:11:04 Msec=3000 True Az=112.995 Ze=-108.06 Az status=0008 Ze status=0009 14:11:04 Check angles 14:11:04 SkyScan query 14:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.435<-20629 Statuses=0008 0009 14:11:05 Msec=3750 True Az=112.995 Ze=-129.435 Az status=0008 Ze status=0009 14:11:05 Check angles 14:11:05 SkyScan query 14:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.765<-22051 Statuses=0008 0009 14:11:05 Msec=4500 True Az=112.995 Ze=-150.765 Az status=0008 Ze status=0009 14:11:06 Check angles 14:11:06 SkyScan query 14:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0008 0009 14:11:06 Msec=5250 True Az=112.995 Ze=-171.465 Az status=0008 Ze status=0009 14:11:06 Check angles 14:11:06 SkyScan query 14:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:11:07 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:11:07 Message to Master queued w/err=0: serial=279486 error=0 14:11:12 Received message from Master: op=Filter serial=279487 14:11:12 Color wheel filter change from 0 to 0 14:11:12 FLIGetFilterPos err=0 currentPosition=0 14:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:12 Filter is already there-color wheel unchanged 14:11:12 Received message from Master: op=Shutter serial=279488 14:11:12 Shutter LASER open 14:11:12 Received message from Camera: op=State serial=279490 14:11:12 GetSingleValue result=40 Value=cccccccc 14:11:12 SkyScan query 14:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:13 Parameters OK 14:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:13 Set A/D data flow result=40 14:11:13 Set A/D channel type result=40 14:11:13 Set A/D encoding result=40 14:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:13 Set channel filter=0.000000e+000 result=40 14:11:13 Config A/D Result=40 14:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:13 Get A/D filter: -9.255963e+061 result=40 14:11:13 Get A/D value=-858993460 result=40 14:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:13 Parameters OK 14:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:13 Set A/D data flow result=40 14:11:13 Set A/D channel type result=40 14:11:13 Set A/D encoding result=40 14:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:13 Set channel filter=0.000000e+000 result=40 14:11:13 Config A/D Result=40 14:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:13 Get A/D filter: -9.255963e+061 result=40 14:11:13 Get A/D value=-858993460 result=40 14:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:13 Aux= 14:11:13 Message to Camera, serial 279490 queued 14:11:21 Received message from Master: op=Shutter serial=279500 14:11:21 Shutter LASER close 14:11:22 Received message from Master: op=PointingHead serial=279504 14:11:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:11:22 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:11:22 Point started: ret=0 14:11:22 point_skyscan result=0 14:11:23 Check angles 14:11:23 SkyScan query 14:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.01<-21534 Statuses=0008 0009 14:11:24 Msec=0 True Az=112.995 Ze=-143.01 Az status=0008 Ze status=0009 14:11:24 Check angles 14:11:24 SkyScan query 14:11:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.025<-20135 Statuses=0008 0009 14:11:24 Msec=750 True Az=112.995 Ze=-122.025 Az status=0008 Ze status=0009 14:11:25 Check angles 14:11:25 SkyScan query 14:11:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.13<-18742 Statuses=0008 0009 14:11:25 Msec=1500 True Az=112.995 Ze=-101.13 Az status=0008 Ze status=0009 14:11:25 Check angles 14:11:25 SkyScan query 14:11:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.145<-17343 Statuses=0008 0009 14:11:26 Msec=2250 True Az=112.995 Ze=-80.145 Az status=0008 Ze status=0009 14:11:26 Check angles 14:11:26 SkyScan query 14:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.19<-15946 Statuses=0008 0009 14:11:27 Msec=3000 True Az=112.995 Ze=-59.19 Az status=0008 Ze status=0009 14:11:27 Check angles 14:11:27 SkyScan query 14:11:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.74<-14516 Statuses=0008 0009 14:11:27 Msec=3750 True Az=112.995 Ze=-37.74 Az status=0008 Ze status=0009 14:11:28 Check angles 14:11:28 SkyScan query 14:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.8<-13120 Statuses=0008 0009 14:11:28 Msec=4500 True Az=112.995 Ze=-16.8 Az status=0008 Ze status=0009 14:11:28 Check angles 14:11:28 SkyScan query 14:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=4.125<-11725 Statuses=0008 0009 14:11:29 Msec=5250 True Az=112.995 Ze=4.125 Az status=0008 Ze status=0009 14:11:29 Check angles 14:11:29 SkyScan query 14:11:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:11:30 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:11:30 Message to Master queued w/err=0: serial=279504 error=0 14:11:35 Received message from Master: op=Filter serial=279505 14:11:35 Color wheel filter change from 0 to 0 14:11:35 FLIGetFilterPos err=0 currentPosition=0 14:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:35 Filter is already there-color wheel unchanged 14:11:35 Received message from Master: op=Shutter serial=279506 14:11:35 Shutter LASER close 14:11:35 Received message from Camera: op=State serial=279508 14:11:35 GetSingleValue result=40 Value=cccccccc 14:11:35 SkyScan query 14:11:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:36 Parameters OK 14:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:36 Set A/D data flow result=40 14:11:36 Set A/D channel type result=40 14:11:36 Set A/D encoding result=40 14:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:36 Set channel filter=0.000000e+000 result=40 14:11:36 Config A/D Result=40 14:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:36 Get A/D filter: -9.255963e+061 result=40 14:11:36 Get A/D value=-858993460 result=40 14:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:36 Parameters OK 14:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:36 Set A/D data flow result=40 14:11:36 Set A/D channel type result=40 14:11:36 Set A/D encoding result=40 14:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:36 Set channel filter=0.000000e+000 result=40 14:11:36 Config A/D Result=40 14:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:36 Get A/D filter: -9.255963e+061 result=40 14:11:36 Get A/D value=-858993460 result=40 14:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:36 Aux= 14:11:36 Message to Camera, serial 279508 queued 14:12:12 Received message from Master: op=PointingHead serial=279521 14:12:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:12:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:12:13 Point started: ret=0 14:12:13 point_skyscan result=0 14:12:14 Check angles 14:12:14 SkyScan query 14:12:14 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:14 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:12:14 Message to Master queued w/err=0: serial=279521 error=0 14:12:19 Received message from Master: op=Filter serial=279522 14:12:19 Color wheel filter change from 0 to 0 14:12:19 FLIGetFilterPos err=0 currentPosition=0 14:12:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:19 Filter is already there-color wheel unchanged 14:12:19 Received message from Master: op=Shutter serial=279523 14:12:19 Shutter LASER close 14:12:19 Received message from Camera: op=State serial=279525 14:12:19 GetSingleValue result=40 Value=cccccccc 14:12:19 SkyScan query 14:12:20 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:12:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:20 Parameters OK 14:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:20 Set A/D data flow result=40 14:12:20 Set A/D channel type result=40 14:12:20 Set A/D encoding result=40 14:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:20 Set channel filter=0.000000e+000 result=40 14:12:20 Config A/D Result=40 14:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:20 Get A/D filter: -9.255963e+061 result=40 14:12:20 Get A/D value=-858993460 result=40 14:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:20 Parameters OK 14:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:20 Set A/D data flow result=40 14:12:20 Set A/D channel type result=40 14:12:20 Set A/D encoding result=40 14:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:20 Set channel filter=0.000000e+000 result=40 14:12:20 Config A/D Result=40 14:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:20 Get A/D filter: -9.255963e+061 result=40 14:12:20 Get A/D value=-858993460 result=40 14:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:20 Aux= 14:12:20 Message to Camera, serial 279525 queued 14:12:57 Received message from Master: op=PointingHead serial=279538 14:12:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:12:57 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:12:57 Point started: ret=0 14:12:57 point_skyscan result=0 14:12:58 Check angles 14:12:58 SkyScan query 14:12:58 SkyScan query done: ret=0 az=136.14<-9076 ze=-6.51<-12434 Statuses=0009 0008 14:12:58 Msec=0 True Az=136.14 Ze=-6.51 Az status=0009 Ze status=0008 14:12:59 Check angles 14:12:59 SkyScan query 14:12:59 SkyScan query done: ret=0 az=153.975<-10265 ze=-6.495<-12433 Statuses=0009 0008 14:12:59 Msec=750 True Az=153.975 Ze=-6.495 Az status=0009 Ze status=0008 14:12:59 Check angles 14:12:59 SkyScan query 14:13:00 SkyScan query done: ret=0 az=171.495<-11433 ze=-6.495<-12433 Statuses=0009 0008 14:13:00 Msec=1500 True Az=171.495 Ze=-6.495 Az status=0009 Ze status=0008 14:13:00 Check angles 14:13:00 SkyScan query 14:13:01 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 14:13:01 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 14:13:01 Message to Master queued w/err=0: serial=279538 error=0 14:13:06 Received message from Master: op=Filter serial=279539 14:13:06 Color wheel filter change from 0 to 0 14:13:06 FLIGetFilterPos err=0 currentPosition=0 14:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:06 Filter is already there-color wheel unchanged 14:13:06 Received message from Master: op=Shutter serial=279540 14:13:06 Shutter LASER close 14:13:06 Received message from Camera: op=State serial=279542 14:13:06 GetSingleValue result=40 Value=cccccccc 14:13:06 SkyScan query 14:13:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:07 Parameters OK 14:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:07 Set A/D data flow result=40 14:13:07 Set A/D channel type result=40 14:13:07 Set A/D encoding result=40 14:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:07 Set channel filter=0.000000e+000 result=40 14:13:07 Config A/D Result=40 14:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:07 Get A/D filter: -9.255963e+061 result=40 14:13:07 Get A/D value=-858993460 result=40 14:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:07 Parameters OK 14:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:07 Set A/D data flow result=40 14:13:07 Set A/D channel type result=40 14:13:07 Set A/D encoding result=40 14:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:07 Set channel filter=0.000000e+000 result=40 14:13:07 Config A/D Result=40 14:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:07 Get A/D filter: -9.255963e+061 result=40 14:13:07 Get A/D value=-858993460 result=40 14:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:07 Aux= 14:13:07 Message to Camera, serial 279542 queued 14:13:43 Received message from Master: op=PointingHead serial=279555 14:13:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:13:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:13:44 Point started: ret=0 14:13:44 point_skyscan result=0 14:13:44 Check angles 14:13:44 SkyScan query 14:13:45 SkyScan query done: ret=0 az=153.24<-10216 ze=6.51<-11566 Statuses=0009 0008 14:13:45 Msec=0 True Az=153.24 Ze=6.51 Az status=0009 Ze status=0008 14:13:45 Check angles 14:13:45 SkyScan query 14:13:46 SkyScan query done: ret=0 az=135.45<-9030 ze=6.495<-11567 Statuses=0009 0008 14:13:46 Msec=750 True Az=135.45 Ze=6.495 Az status=0009 Ze status=0008 14:13:46 Check angles 14:13:46 SkyScan query 14:13:47 SkyScan query done: ret=0 az=117.945<-7863 ze=6.495<-11567 Statuses=0009 0008 14:13:47 Msec=1500 True Az=117.945 Ze=6.495 Az status=0009 Ze status=0008 14:13:47 Check angles 14:13:47 SkyScan query 14:13:47 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:47 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:13:47 Message to Master queued w/err=0: serial=279555 error=0 14:13:52 Received message from Master: op=Filter serial=279556 14:13:52 Color wheel filter change from 0 to 0 14:13:52 FLIGetFilterPos err=0 currentPosition=0 14:13:52 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:52 Filter is already there-color wheel unchanged 14:13:52 Received message from Master: op=Shutter serial=279557 14:13:52 Shutter LASER close 14:13:53 Received message from Camera: op=State serial=279559 14:13:53 GetSingleValue result=40 Value=cccccccc 14:13:53 SkyScan query 14:13:53 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:13:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:53 Parameters OK 14:13:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:53 Set A/D data flow result=40 14:13:53 Set A/D channel type result=40 14:13:53 Set A/D encoding result=40 14:13:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:53 Set channel filter=0.000000e+000 result=40 14:13:53 Config A/D Result=40 14:13:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:53 Get A/D filter: -9.255963e+061 result=40 14:13:53 Get A/D value=-858993460 result=40 14:13:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:53 Parameters OK 14:13:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:53 Set A/D data flow result=40 14:13:53 Set A/D channel type result=40 [UTC 2019-3-14 14:13:53] 14:13:53 Set A/D encoding result=40 14:13:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:53 Set channel filter=0.000000e+000 result=40 14:13:53 Config A/D Result=40 14:13:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:53 Get A/D filter: -9.255963e+061 result=40 14:13:53 Get A/D value=-858993460 result=40 14:13:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:53 Aux= 14:13:53 Message to Camera, serial 279559 queued 14:14:30 Received message from Master: op=PointingHead serial=279572 14:14:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:14:30 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:14:30 Point started: ret=0 14:14:30 point_skyscan result=0 14:14:31 Check angles 14:14:31 SkyScan query 14:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-24.06<-13604 Statuses=0008 0009 14:14:32 Msec=0 True Az=112.995 Ze=-24.06 Az status=0008 Ze status=0009 14:14:32 Check angles 14:14:32 SkyScan query 14:14:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.97<-14998 Statuses=0008 0009 14:14:32 Msec=750 True Az=112.995 Ze=-44.97 Az status=0008 Ze status=0009 14:14:33 Check angles 14:14:33 SkyScan query 14:14:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.955<-16397 Statuses=0008 0009 14:14:33 Msec=1500 True Az=112.995 Ze=-65.955 Az status=0008 Ze status=0009 14:14:33 Check angles 14:14:33 SkyScan query 14:14:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.94<-17796 Statuses=0008 0009 14:14:34 Msec=2250 True Az=112.995 Ze=-86.94 Az status=0008 Ze status=0009 14:14:34 Check angles 14:14:34 SkyScan query 14:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.91<-19194 Statuses=0008 0009 14:14:35 Msec=3000 True Az=112.995 Ze=-107.91 Az status=0008 Ze status=0009 14:14:35 Check angles 14:14:35 SkyScan query 14:14:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.82<-20588 Statuses=0008 0009 14:14:35 Msec=3750 True Az=112.995 Ze=-128.82 Az status=0008 Ze status=0009 14:14:36 Check angles 14:14:36 SkyScan query 14:14:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.82<-21988 Statuses=0008 0009 14:14:36 Msec=4500 True Az=112.995 Ze=-149.82 Az status=0008 Ze status=0009 14:14:36 Check angles 14:14:36 SkyScan query 14:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.7<-23380 Statuses=0008 0009 14:14:37 Msec=5250 True Az=112.995 Ze=-170.7 Az status=0008 Ze status=0009 14:14:37 Check angles 14:14:37 SkyScan query 14:14:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:14:38 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:14:38 Message to Master queued w/err=0: serial=279572 error=0 14:14:43 Received message from Master: op=Filter serial=279573 14:14:43 Color wheel filter change from 0 to 0 14:14:43 FLIGetFilterPos err=0 currentPosition=0 14:14:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:43 Filter is already there-color wheel unchanged 14:14:43 Received message from Master: op=Shutter serial=279574 14:14:43 Shutter LASER open 14:14:43 Received message from Camera: op=State serial=279576 14:14:43 GetSingleValue result=40 Value=cccccccc 14:14:43 SkyScan query 14:14:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:14:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:44 Parameters OK 14:14:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:44 Set A/D data flow result=40 14:14:44 Set A/D channel type result=40 14:14:44 Set A/D encoding result=40 14:14:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:44 Set channel filter=0.000000e+000 result=40 14:14:44 Config A/D Result=40 14:14:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:44 Get A/D filter: -9.255963e+061 result=40 14:14:44 Get A/D value=-858993460 result=40 14:14:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:44 Parameters OK 14:14:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:44 Set A/D data flow result=40 14:14:44 Set A/D channel type result=40 14:14:44 Set A/D encoding result=40 14:14:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:44 Set channel filter=0.000000e+000 result=40 14:14:44 Config A/D Result=40 14:14:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:44 Get A/D filter: -9.255963e+061 result=40 14:14:44 Get A/D value=-858993460 result=40 14:14:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:44 Aux= 14:14:44 Message to Camera, serial 279576 queued 14:14:52 Received message from Master: op=Shutter serial=279586 14:14:52 Shutter LASER close 14:14:52 Received message from Master: op=PointingHead serial=279590 14:14:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:14:52 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:14:53 Point started: ret=0 14:14:53 point_skyscan result=0 14:14:54 Check angles 14:14:54 SkyScan query 14:14:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.935<-21529 Statuses=0008 0009 14:14:54 Msec=0 True Az=112.995 Ze=-142.935 Az status=0008 Ze status=0009 14:14:54 Check angles 14:14:54 SkyScan query 14:14:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.485<-20099 Statuses=0008 0009 14:14:55 Msec=750 True Az=112.995 Ze=-121.485 Az status=0008 Ze status=0009 14:14:55 Check angles 14:14:55 SkyScan query 14:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.545<-18703 Statuses=0008 0009 14:14:56 Msec=1500 True Az=112.995 Ze=-100.545 Az status=0008 Ze status=0009 14:14:56 Check angles 14:14:56 SkyScan query 14:14:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.56<-17304 Statuses=0008 0009 14:14:56 Msec=2250 True Az=112.995 Ze=-79.56 Az status=0008 Ze status=0009 14:14:57 Check angles 14:14:57 SkyScan query 14:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.155<-15877 Statuses=0008 0009 14:14:57 Msec=3000 True Az=112.995 Ze=-58.155 Az status=0008 Ze status=0009 14:14:57 Check angles 14:14:57 SkyScan query 14:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.275<-14485 Statuses=0008 0009 14:14:58 Msec=3750 True Az=112.995 Ze=-37.275 Az status=0008 Ze status=0009 14:14:58 Check angles 14:14:58 SkyScan query 14:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.29<-13086 Statuses=0008 0009 14:14:59 Msec=4500 True Az=112.995 Ze=-16.29 Az status=0008 Ze status=0009 14:14:59 Check angles 14:14:59 SkyScan query 14:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=4.515<-11699 Statuses=0008 0009 14:14:59 Msec=5250 True Az=112.995 Ze=4.515 Az status=0008 Ze status=0009 14:15:00 Check angles 14:15:00 SkyScan query 14:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:15:00 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:15:00 Message to Master queued w/err=0: serial=279590 error=0 14:15:05 Received message from Master: op=Filter serial=279591 14:15:05 Color wheel filter change from 0 to 0 14:15:05 FLIGetFilterPos err=0 currentPosition=0 14:15:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:05 Filter is already there-color wheel unchanged 14:15:05 Received message from Master: op=Shutter serial=279592 14:15:05 Shutter LASER close 14:15:05 Received message from Camera: op=State serial=279594 14:15:05 GetSingleValue result=40 Value=cccccccc 14:15:05 SkyScan query 14:15:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:06 Parameters OK 14:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:06 Set A/D data flow result=40 14:15:06 Set A/D channel type result=40 14:15:06 Set A/D encoding result=40 14:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:06 Set channel filter=0.000000e+000 result=40 14:15:06 Config A/D Result=40 14:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:06 Get A/D filter: -9.255963e+061 result=40 14:15:06 Get A/D value=-858993460 result=40 14:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:06 Parameters OK 14:15:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:06 Set A/D data flow result=40 14:15:06 Set A/D channel type result=40 14:15:06 Set A/D encoding result=40 14:15:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:06 Set channel filter=0.000000e+000 result=40 14:15:06 Config A/D Result=40 14:15:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:06 Get A/D filter: -9.255963e+061 result=40 14:15:06 Get A/D value=-858993460 result=40 14:15:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:06 Aux= 14:15:06 Message to Camera, serial 279594 queued 14:15:43 Received message from Master: op=PointingHead serial=279607 14:15:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:15:43 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:15:43 Point started: ret=0 14:15:43 point_skyscan result=0 14:15:44 Check angles 14:15:44 SkyScan query 14:15:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:45 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:15:45 Message to Master queued w/err=0: serial=279607 error=0 14:15:50 Received message from Master: op=Filter serial=279608 14:15:50 Color wheel filter change from 0 to 0 14:15:50 FLIGetFilterPos err=0 currentPosition=0 14:15:50 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:50 Filter is already there-color wheel unchanged 14:15:50 Received message from Master: op=Shutter serial=279609 14:15:50 Shutter LASER close 14:15:50 Received message from Camera: op=State serial=279611 14:15:50 GetSingleValue result=40 Value=cccccccc 14:15:50 SkyScan query 14:15:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:15:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:50 Parameters OK 14:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:50 Set A/D data flow result=40 14:15:50 Set A/D channel type result=40 14:15:50 Set A/D encoding result=40 14:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:50 Set channel filter=0.000000e+000 result=40 14:15:50 Config A/D Result=40 14:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:50 Get A/D filter: -9.255963e+061 result=40 14:15:50 Get A/D value=-858993460 result=40 14:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:50 Parameters OK 14:15:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:50 Set A/D data flow result=40 14:15:50 Set A/D channel type result=40 14:15:50 Set A/D encoding result=40 14:15:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:50 Set channel filter=0.000000e+000 result=40 14:15:50 Config A/D Result=40 14:15:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:50 Get A/D filter: -9.255963e+061 result=40 14:15:50 Get A/D value=-858993460 result=40 14:15:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:50 Aux= 14:15:50 Message to Camera, serial 279611 queued 14:16:27 Received message from Master: op=PointingHead serial=279624 14:16:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:16:27 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:16:28 Point started: ret=0 14:16:28 point_skyscan result=0 14:16:28 Check angles 14:16:28 SkyScan query 14:16:29 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:29 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:16:29 Message to Master queued w/err=0: serial=279624 error=0 14:16:34 Received message from Master: op=Filter serial=279625 14:16:34 Color wheel filter change from 0 to 0 14:16:34 FLIGetFilterPos err=0 currentPosition=0 14:16:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:34 Filter is already there-color wheel unchanged 14:16:34 Received message from Master: op=Shutter serial=279626 14:16:34 Shutter LASER close 14:16:34 Received message from Camera: op=State serial=279628 14:16:34 GetSingleValue result=40 Value=cccccccc 14:16:34 SkyScan query 14:16:35 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:16:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:35 Parameters OK 14:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:35 Set A/D data flow result=40 14:16:35 Set A/D channel type result=40 14:16:35 Set A/D encoding result=40 14:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:35 Set channel filter=0.000000e+000 result=40 14:16:35 Config A/D Result=40 14:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:35 Get A/D filter: -9.255963e+061 result=40 14:16:35 Get A/D value=-858993460 result=40 14:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:35 Parameters OK 14:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:35 Set A/D data flow result=40 14:16:35 Set A/D channel type result=40 14:16:35 Set A/D encoding result=40 14:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:35 Set channel filter=0.000000e+000 result=40 14:16:35 Config A/D Result=40 14:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:35 Get A/D filter: -9.255963e+061 result=40 14:16:35 Get A/D value=-858993460 result=40 14:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:35 Aux= 14:16:35 Message to Camera, serial 279628 queued 14:17:12 Received message from Master: op=PointingHead serial=279641 14:17:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:17:12 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:17:12 Point started: ret=0 14:17:12 point_skyscan result=0 14:17:13 Check angles 14:17:13 SkyScan query 14:17:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:13 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:17:13 Message to Master queued w/err=0: serial=279641 error=0 14:17:18 Received message from Master: op=Filter serial=279642 14:17:18 Color wheel filter change from 0 to 0 14:17:18 FLIGetFilterPos err=0 currentPosition=0 14:17:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:18 Filter is already there-color wheel unchanged 14:17:18 Received message from Master: op=Shutter serial=279643 14:17:18 Shutter LASER close 14:17:18 Received message from Camera: op=State serial=279645 14:17:18 GetSingleValue result=40 Value=cccccccc 14:17:18 SkyScan query 14:17:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:17:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:19 Parameters OK 14:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:19 Set A/D data flow result=40 14:17:19 Set A/D channel type result=40 14:17:19 Set A/D encoding result=40 14:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:19 Set channel filter=0.000000e+000 result=40 14:17:19 Config A/D Result=40 14:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:19 Get A/D filter: -9.255963e+061 result=40 14:17:19 Get A/D value=-858993460 result=40 14:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:19 Parameters OK 14:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:19 Set A/D data flow result=40 14:17:19 Set A/D channel type result=40 14:17:19 Set A/D encoding result=40 14:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:19 Set channel filter=0.000000e+000 result=40 14:17:19 Config A/D Result=40 14:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:19 Get A/D filter: -9.255963e+061 result=40 14:17:19 Get A/D value=-858993460 result=40 14:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:19 Aux= 14:17:19 Message to Camera, serial 279645 queued 14:17:56 Received message from Master: op=PointingHead serial=279658 14:17:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:17:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:17:56 Point started: ret=0 14:17:56 point_skyscan result=0 14:17:57 Check angles 14:17:57 SkyScan query 14:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.445<-13563 Statuses=0008 0009 14:17:58 Msec=0 True Az=112.995 Ze=-23.445 Az status=0008 Ze status=0009 14:17:58 Check angles 14:17:58 SkyScan query 14:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.415<-14961 Statuses=0008 0009 14:17:58 Msec=750 True Az=112.995 Ze=-44.415 Az status=0008 Ze status=0009 14:17:58 Check angles 14:17:58 SkyScan query 14:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.325<-16355 Statuses=0008 0009 14:17:59 Msec=1500 True Az=112.995 Ze=-65.325 Az status=0008 Ze status=0009 14:17:59 Check angles 14:17:59 SkyScan query 14:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.295<-17753 Statuses=0008 0009 14:18:00 Msec=2250 True Az=112.995 Ze=-86.295 Az status=0008 Ze status=0009 14:18:00 Check angles 14:18:00 SkyScan query 14:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 14:18:01 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 14:18:01 Check angles 14:18:01 SkyScan query 14:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.625<-20575 Statuses=0008 0009 14:18:01 Msec=3750 True Az=112.995 Ze=-128.625 Az status=0008 Ze status=0009 14:18:01 Check angles 14:18:01 SkyScan query 14:18:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.625<-21975 Statuses=0008 0009 14:18:02 Msec=4500 True Az=112.995 Ze=-149.625 Az status=0008 Ze status=0009 14:18:02 Check angles 14:18:02 SkyScan query 14:18:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 14:18:03 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 14:18:03 Check angles 14:18:03 SkyScan query 14:18:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:18:04 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:18:04 Message to Master queued w/err=0: serial=279658 error=0 14:18:09 Received message from Master: op=Filter serial=279659 14:18:09 Color wheel filter change from 0 to 0 14:18:09 FLIGetFilterPos err=0 currentPosition=0 14:18:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:09 Filter is already there-color wheel unchanged 14:18:09 Received message from Master: op=Shutter serial=279660 14:18:09 Shutter LASER open 14:18:09 Received message from Camera: op=State serial=279662 14:18:09 GetSingleValue result=40 Value=cccccccc 14:18:09 SkyScan query 14:18:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:18:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:10 Parameters OK 14:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:10 Set A/D data flow result=40 14:18:10 Set A/D channel type result=40 14:18:10 Set A/D encoding result=40 14:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:10 Set channel filter=0.000000e+000 result=40 14:18:10 Config A/D Result=40 14:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:10 Get A/D filter: -9.255963e+061 result=40 14:18:10 Get A/D value=-858993460 result=40 14:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:10 Parameters OK 14:18:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:10 Set A/D data flow result=40 14:18:10 Set A/D channel type result=40 14:18:10 Set A/D encoding result=40 14:18:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:10 Set channel filter=0.000000e+000 result=40 14:18:10 Config A/D Result=40 14:18:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:10 Get A/D filter: -9.255963e+061 result=40 14:18:10 Get A/D value=-858993460 result=40 14:18:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:10 Aux= 14:18:10 Message to Camera, serial 279662 queued 14:18:18 Received message from Master: op=Shutter serial=279672 14:18:18 Shutter LASER close 14:18:19 Received message from Master: op=PointingHead serial=279676 14:18:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:18:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:18:19 Point started: ret=0 14:18:19 point_skyscan result=0 14:18:20 Check angles 14:18:20 SkyScan query 14:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.145<-21543 Statuses=0008 0009 14:18:20 Msec=0 True Az=112.995 Ze=-143.145 Az status=0008 Ze status=0009 14:18:20 Check angles 14:18:20 SkyScan query 14:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.175<-20145 Statuses=0008 0009 14:18:21 Msec=750 True Az=112.995 Ze=-122.175 Az status=0008 Ze status=0009 14:18:21 Check angles 14:18:21 SkyScan query 14:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.265<-18751 Statuses=0008 0009 14:18:22 Msec=1500 True Az=112.995 Ze=-101.265 Az status=0008 Ze status=0009 14:18:22 Check angles 14:18:22 SkyScan query 14:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.28<-17352 Statuses=0008 0009 14:18:22 Msec=2250 True Az=112.995 Ze=-80.28 Az status=0008 Ze status=0009 14:18:23 Check angles 14:18:23 SkyScan query 14:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.34<-15956 Statuses=0008 0009 14:18:23 Msec=3000 True Az=112.995 Ze=-59.34 Az status=0008 Ze status=0009 14:18:23 Check angles 14:18:23 SkyScan query 14:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.325<-14555 Statuses=0008 0009 14:18:24 Msec=3750 True Az=112.995 Ze=-38.325 Az status=0008 Ze status=0009 14:18:24 Check angles 14:18:24 SkyScan query 14:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.4<-13160 Statuses=0008 0009 14:18:25 Msec=4500 True Az=112.995 Ze=-17.4 Az status=0008 Ze status=0009 14:18:25 Check angles 14:18:25 SkyScan query 14:18:25 SkyScan query done: ret=0 az=112.995<-7533 ze=4.02<-11732 Statuses=0008 0009 14:18:25 Msec=5250 True Az=112.995 Ze=4.02 Az status=0008 Ze status=0009 14:18:26 Check angles 14:18:26 SkyScan query 14:18:26 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:18:26 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:18:26 Message to Master queued w/err=0: serial=279676 error=0 14:18:31 Received message from Master: op=Filter serial=279677 14:18:31 Color wheel filter change from 0 to 0 14:18:31 FLIGetFilterPos err=0 currentPosition=0 14:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:31 Filter is already there-color wheel unchanged 14:18:31 Received message from Master: op=Shutter serial=279678 14:18:31 Shutter LASER close 14:18:32 Received message from Camera: op=State serial=279680 14:18:32 GetSingleValue result=40 Value=cccccccc 14:18:32 SkyScan query 14:18:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:32 Parameters OK 14:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:32 Set A/D data flow result=40 14:18:32 Set A/D channel type result=40 14:18:32 Set A/D encoding result=40 14:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:32 Set channel filter=0.000000e+000 result=40 14:18:32 Config A/D Result=40 14:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:32 Get A/D filter: -9.255963e+061 result=40 14:18:32 Get A/D value=-858993460 result=40 14:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:32 Parameters OK 14:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:32 Set A/D data flow result=40 14:18:32 Set A/D channel type result=40 14:18:32 Set A/D encoding result=40 14:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:32 Set channel filter=0.000000e+000 result=40 14:18:32 Config A/D Result=40 14:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:32 Get A/D filter: -9.255963e+061 result=40 14:18:32 Get A/D value=-858993460 result=40 14:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:32 Aux= 14:18:32 Message to Camera, serial 279680 queued 14:19:09 Received message from Master: op=PointingHead serial=279693 14:19:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:19:09 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:19:09 Point started: ret=0 14:19:09 point_skyscan result=0 14:19:10 Check angles 14:19:10 SkyScan query 14:19:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:11 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:19:11 Message to Master queued w/err=0: serial=279693 error=0 14:19:16 Received message from Master: op=Filter serial=279694 14:19:16 Color wheel filter change from 0 to 0 14:19:16 FLIGetFilterPos err=0 currentPosition=0 14:19:16 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:16 Filter is already there-color wheel unchanged 14:19:16 Received message from Master: op=Shutter serial=279695 14:19:16 Shutter LASER close 14:19:16 Received message from Camera: op=State serial=279697 14:19:16 GetSingleValue result=40 Value=cccccccc 14:19:16 SkyScan query 14:19:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:19:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:16 Parameters OK 14:19:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:16 Set A/D data flow result=40 14:19:16 Set A/D channel type result=40 14:19:16 Set A/D encoding result=40 14:19:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:16 Set channel filter=0.000000e+000 result=40 14:19:16 Config A/D Result=40 14:19:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:16 Get A/D filter: -9.255963e+061 result=40 14:19:16 Get A/D value=-858993460 result=40 14:19:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:16 Parameters OK 14:19:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:16 Set A/D data flow result=40 14:19:16 Set A/D channel type result=40 14:19:16 Set A/D encoding result=40 14:19:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:16 Set channel filter=0.000000e+000 result=40 14:19:16 Config A/D Result=40 14:19:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:16 Get A/D filter: -9.255963e+061 result=40 14:19:16 Get A/D value=-858993460 result=40 14:19:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:16 Aux= 14:19:16 Message to Camera, serial 279697 queued 14:19:53 Received message from Master: op=PointingHead serial=279710 14:19:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:19:53 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:19:54 Point started: ret=0 14:19:54 point_skyscan result=0 14:19:54 Check angles 14:19:54 SkyScan query 14:19:55 SkyScan query done: ret=0 az=136.11<-9074 ze=-6.51<-12434 Statuses=0009 0008 14:19:55 Msec=0 True Az=136.11 Ze=-6.51 Az status=0009 Ze status=0008 14:19:55 Check angles 14:19:55 SkyScan query 14:19:56 SkyScan query done: ret=0 az=153.525<-10235 ze=-6.495<-12433 Statuses=0009 0008 14:19:56 Msec=750 True Az=153.525 Ze=-6.495 Az status=0009 Ze status=0008 14:19:56 Check angles 14:19:56 SkyScan query 14:19:56 SkyScan query done: ret=0 az=171.345<-11423 ze=-6.495<-12433 Statuses=0009 0008 14:19:56 Msec=1500 True Az=171.345 Ze=-6.495 Az status=0009 Ze status=0008 14:19:57 Check angles 14:19:57 SkyScan query 14:19:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 14:19:57 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 14:19:57 Message to Master queued w/err=0: serial=279710 error=0 14:20:02 Received message from Master: op=Filter serial=279711 14:20:02 Color wheel filter change from 0 to 0 14:20:02 FLIGetFilterPos err=0 currentPosition=0 14:20:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:02 Filter is already there-color wheel unchanged 14:20:02 Received message from Master: op=Shutter serial=279712 14:20:02 Shutter LASER close 14:20:02 Received message from Camera: op=State serial=279714 14:20:02 GetSingleValue result=40 Value=cccccccc 14:20:02 SkyScan query 14:20:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:20:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:03 Parameters OK 14:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:03 Set A/D data flow result=40 14:20:03 Set A/D channel type result=40 14:20:03 Set A/D encoding result=40 14:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:03 Set channel filter=0.000000e+000 result=40 14:20:03 Config A/D Result=40 14:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:03 Get A/D filter: -9.255963e+061 result=40 14:20:03 Get A/D value=-858993460 result=40 14:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:03 Parameters OK 14:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:03 Set A/D data flow result=40 14:20:03 Set A/D channel type result=40 14:20:03 Set A/D encoding result=40 14:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:03 Set channel filter=0.000000e+000 result=40 14:20:03 Config A/D Result=40 14:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:03 Get A/D filter: -9.255963e+061 result=40 14:20:03 Get A/D value=-858993460 result=40 14:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:03 Aux= 14:20:03 Message to Camera, serial 279714 queued 14:20:40 Received message from Master: op=PointingHead serial=279727 14:20:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:20:40 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:20:40 Point started: ret=0 14:20:40 point_skyscan result=0 14:20:41 Check angles 14:20:41 SkyScan query 14:20:42 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 14:20:42 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 14:20:42 Check angles 14:20:42 SkyScan query 14:20:42 SkyScan query done: ret=0 az=135.15<-9010 ze=6.495<-11567 Statuses=0009 0008 14:20:42 Msec=750 True Az=135.15 Ze=6.495 Az status=0009 Ze status=0008 14:20:43 Check angles 14:20:43 SkyScan query 14:20:43 SkyScan query done: ret=0 az=117.675<-7845 ze=6.495<-11567 Statuses=0009 0008 14:20:43 Msec=1500 True Az=117.675 Ze=6.495 Az status=0009 Ze status=0008 14:20:43 Check angles 14:20:43 SkyScan query 14:20:44 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:44 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:20:44 Message to Master queued w/err=0: serial=279727 error=0 14:20:49 Received message from Master: op=Filter serial=279728 14:20:49 Color wheel filter change from 0 to 0 14:20:49 FLIGetFilterPos err=0 currentPosition=0 14:20:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:49 Filter is already there-color wheel unchanged 14:20:49 Received message from Master: op=Shutter serial=279729 14:20:49 Shutter LASER close 14:20:49 Received message from Camera: op=State serial=279731 14:20:49 GetSingleValue result=40 Value=cccccccc 14:20:49 SkyScan query 14:20:50 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:20:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:50 Parameters OK 14:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:50 Set A/D data flow result=40 14:20:50 Set A/D channel type result=40 14:20:50 Set A/D encoding result=40 14:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:50 Set channel filter=0.000000e+000 result=40 14:20:50 Config A/D Result=40 14:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:50 Get A/D filter: -9.255963e+061 result=40 14:20:50 Get A/D value=-858993460 result=40 14:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:50 Parameters OK 14:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:50 Set A/D data flow result=40 14:20:50 Set A/D channel type result=40 14:20:50 Set A/D encoding result=40 14:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:50 Set channel filter=0.000000e+000 result=40 14:20:50 Config A/D Result=40 14:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:50 Get A/D filter: -9.255963e+061 result=40 14:20:50 Get A/D value=-858993460 result=40 14:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:50 Aux= 14:20:50 Message to Camera, serial 279731 queued 14:21:26 Received message from Master: op=PointingHead serial=279744 14:21:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:21:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:21:27 Point started: ret=0 14:21:27 point_skyscan result=0 14:21:28 Check angles 14:21:28 SkyScan query 14:21:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 14:21:28 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 14:21:28 Check angles 14:21:28 SkyScan query 14:21:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.01<-14934 Statuses=0008 0009 14:21:29 Msec=750 True Az=112.995 Ze=-44.01 Az status=0008 Ze status=0009 14:21:29 Check angles 14:21:29 SkyScan query 14:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.92<-16328 Statuses=0008 0009 14:21:30 Msec=1500 True Az=112.995 Ze=-64.92 Az status=0008 Ze status=0009 14:21:30 Check angles 14:21:30 SkyScan query 14:21:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.875<-17725 Statuses=0008 0009 14:21:30 Msec=2250 True Az=112.995 Ze=-85.875 Az status=0008 Ze status=0009 14:21:31 Check angles 14:21:31 SkyScan query 14:21:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.785<-19119 Statuses=0008 0009 14:21:31 Msec=3000 True Az=112.995 Ze=-106.785 Az status=0008 Ze status=0009 14:21:31 Check angles 14:21:31 SkyScan query 14:21:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.77<-20518 Statuses=0008 0009 14:21:32 Msec=3750 True Az=112.995 Ze=-127.77 Az status=0008 Ze status=0009 14:21:32 Check angles 14:21:32 SkyScan query 14:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.695<-21913 Statuses=0008 0009 14:21:33 Msec=4500 True Az=112.995 Ze=-148.695 Az status=0008 Ze status=0009 14:21:33 Check angles 14:21:33 SkyScan query 14:21:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.65<-23310 Statuses=0008 0009 14:21:33 Msec=5250 True Az=112.995 Ze=-169.65 Az status=0008 Ze status=0009 14:21:34 Check angles 14:21:34 SkyScan query 14:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:21:34 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:21:34 Message to Master queued w/err=0: serial=279744 error=0 14:21:39 Received message from Master: op=Filter serial=279745 14:21:39 Color wheel filter change from 0 to 0 14:21:39 FLIGetFilterPos err=0 currentPosition=0 14:21:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:39 Filter is already there-color wheel unchanged 14:21:39 Received message from Master: op=Shutter serial=279746 14:21:39 Shutter LASER open 14:21:39 Received message from Camera: op=State serial=279748 14:21:39 GetSingleValue result=40 Value=cccccccc 14:21:39 SkyScan query 14:21:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:21:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:40 Parameters OK 14:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:40 Set A/D data flow result=40 14:21:40 Set A/D channel type result=40 14:21:40 Set A/D encoding result=40 14:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:40 Set channel filter=0.000000e+000 result=40 14:21:40 Config A/D Result=40 14:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:40 Get A/D filter: -9.255963e+061 result=40 14:21:40 Get A/D value=-858993460 result=40 14:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:40 Parameters OK 14:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:40 Set A/D data flow result=40 14:21:40 Set A/D channel type result=40 14:21:40 Set A/D encoding result=40 14:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:40 Set channel filter=0.000000e+000 result=40 14:21:40 Config A/D Result=40 14:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:40 Get A/D filter: -9.255963e+061 result=40 14:21:40 Get A/D value=-858993460 result=40 14:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:40 Aux= 14:21:40 Message to Camera, serial 279748 queued 14:21:48 Received message from Master: op=Shutter serial=279758 14:21:48 Shutter LASER close 14:21:49 Received message from Master: op=PointingHead serial=279762 14:21:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:21:49 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:21:49 Point started: ret=0 14:21:49 point_skyscan result=0 14:21:50 Check angles 14:21:50 SkyScan query 14:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.265<-21551 Statuses=0008 0009 14:21:51 Msec=0 True Az=112.995 Ze=-143.265 Az status=0008 Ze status=0009 14:21:51 Check angles 14:21:51 SkyScan query 14:21:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.845<-20123 Statuses=0008 0009 14:21:51 Msec=750 True Az=112.995 Ze=-121.845 Az status=0008 Ze status=0009 14:21:52 Check angles 14:21:52 SkyScan query 14:21:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.95<-18730 Statuses=0008 0009 14:21:52 Msec=1500 True Az=112.995 Ze=-100.95 Az status=0008 Ze status=0009 14:21:52 Check angles 14:21:52 SkyScan query 14:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.965<-17331 Statuses=0008 0009 14:21:53 Msec=2250 True Az=112.995 Ze=-79.965 Az status=0008 Ze status=0009 14:21:53 Check angles 14:21:53 SkyScan query 14:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.53<-15902 Statuses=0008 0009 14:21:54 Msec=3000 True Az=112.995 Ze=-58.53 Az status=0008 Ze status=0009 14:21:54 Check angles 14:21:54 SkyScan query 14:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.575<-14505 Statuses=0008 0009 14:21:54 Msec=3750 True Az=112.995 Ze=-37.575 Az status=0008 Ze status=0009 14:21:55 Check angles 14:21:55 SkyScan query 14:21:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.62<-13108 Statuses=0008 0009 14:21:55 Msec=4500 True Az=112.995 Ze=-16.62 Az status=0008 Ze status=0009 14:21:55 Check angles 14:21:55 SkyScan query 14:21:56 SkyScan query done: ret=0 az=112.995<-7533 ze=4.575<-11695 Statuses=0008 0009 14:21:56 Msec=5250 True Az=112.995 Ze=4.575 Az status=0008 Ze status=0009 14:21:56 Check angles 14:21:56 SkyScan query 14:21:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:21:57 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:21:57 Message to Master queued w/err=0: serial=279762 error=0 14:22:02 Received message from Master: op=Filter serial=279763 14:22:02 Color wheel filter change from 0 to 0 14:22:02 FLIGetFilterPos err=0 currentPosition=0 14:22:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:02 Filter is already there-color wheel unchanged 14:22:02 Received message from Master: op=Shutter serial=279764 14:22:02 Shutter LASER close 14:22:02 Received message from Camera: op=State serial=279766 14:22:02 GetSingleValue result=40 Value=cccccccc 14:22:02 SkyScan query 14:22:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:03 Parameters OK 14:22:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:03 Set A/D data flow result=40 14:22:03 Set A/D channel type result=40 14:22:03 Set A/D encoding result=40 14:22:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:03 Set channel filter=0.000000e+000 result=40 14:22:03 Config A/D Result=40 14:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:03 Get A/D filter: -9.255963e+061 result=40 14:22:03 Get A/D value=-858993460 result=40 14:22:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:03 Parameters OK 14:22:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:03 Set A/D data flow result=40 14:22:03 Set A/D channel type result=40 14:22:03 Set A/D encoding result=40 14:22:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:03 Set channel filter=0.000000e+000 result=40 14:22:03 Config A/D Result=40 14:22:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:03 Get A/D filter: -9.255963e+061 result=40 14:22:03 Get A/D value=-858993460 result=40 14:22:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:03 Aux= 14:22:03 Message to Camera, serial 279766 queued 14:22:38 Received message from Master: op=PointingHead serial=279778 14:22:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:22:38 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:22:39 Point started: ret=0 14:22:39 point_skyscan result=0 14:22:40 Check angles 14:22:40 SkyScan query 14:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:40 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:22:40 Message to Master queued w/err=0: serial=279778 error=0 14:22:45 Received message from Master: op=Filter serial=279779 14:22:45 Color wheel filter change from 0 to 0 14:22:45 FLIGetFilterPos err=0 currentPosition=0 14:22:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:45 Filter is already there-color wheel unchanged 14:22:45 Received message from Master: op=Shutter serial=279780 14:22:45 Shutter LASER close 14:22:45 Received message from Camera: op=State serial=279782 14:22:45 GetSingleValue result=40 Value=cccccccc 14:22:45 SkyScan query 14:22:46 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:22:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:46 Parameters OK 14:22:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:46 Set A/D data flow result=40 14:22:46 Set A/D channel type result=40 14:22:46 Set A/D encoding result=40 14:22:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:46 Set channel filter=0.000000e+000 result=40 14:22:46 Config A/D Result=40 14:22:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:46 Get A/D filter: -9.255963e+061 result=40 14:22:46 Get A/D value=-858993460 result=40 14:22:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:46 Parameters OK 14:22:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:46 Set A/D data flow result=40 14:22:46 Set A/D channel type result=40 14:22:46 Set A/D encoding result=40 14:22:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:46 Set channel filter=0.000000e+000 result=40 14:22:46 Config A/D Result=40 14:22:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:46 Get A/D filter: -9.255963e+061 result=40 14:22:46 Get A/D value=-858993460 result=40 14:22:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:46 Aux= 14:22:46 Message to Camera, serial 279782 queued 14:23:23 Received message from Master: op=PointingHead serial=279795 14:23:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:23:23 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:23:23 Point started: ret=0 14:23:23 point_skyscan result=0 14:23:24 Check angles 14:23:24 SkyScan query 14:23:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:24 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:23:24 Message to Master queued w/err=0: serial=279795 error=0 14:23:29 Received message from Master: op=Filter serial=279796 14:23:29 Color wheel filter change from 0 to 0 14:23:29 FLIGetFilterPos err=0 currentPosition=0 14:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:29 Filter is already there-color wheel unchanged 14:23:30 Received message from Master: op=Shutter serial=279797 14:23:30 Shutter LASER close 14:23:30 Received message from Camera: op=State serial=279799 14:23:30 GetSingleValue result=40 Value=cccccccc 14:23:30 SkyScan query 14:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:30 Parameters OK 14:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:30 Set A/D data flow result=40 14:23:30 Set A/D channel type result=40 14:23:30 Set A/D encoding result=40 14:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:30 Set channel filter=0.000000e+000 result=40 14:23:30 Config A/D Result=40 14:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:30 Get A/D filter: -9.255963e+061 result=40 14:23:30 Get A/D value=-858993460 result=40 14:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:30 Parameters OK 14:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:30 Set A/D data flow result=40 14:23:30 Set A/D channel type result=40 14:23:30 Set A/D encoding result=40 14:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:30 Set channel filter=0.000000e+000 result=40 14:23:30 Config A/D Result=40 14:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:30 Get A/D filter: -9.255963e+061 result=40 14:23:30 Get A/D value=-858993460 result=40 14:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:30 Aux= 14:23:30 Message to Camera, serial 279799 queued [UTC 2019-3-14 14:23:48] 14:24:07 Received message from Master: op=PointingHead serial=279812 14:24:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:24:07 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:24:07 Point started: ret=0 14:24:07 point_skyscan result=0 14:24:08 Check angles 14:24:08 SkyScan query 14:24:09 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:09 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:24:09 Message to Master queued w/err=0: serial=279812 error=0 14:24:14 Received message from Master: op=Filter serial=279813 14:24:14 Color wheel filter change from 0 to 0 14:24:14 FLIGetFilterPos err=0 currentPosition=0 14:24:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:14 Filter is already there-color wheel unchanged 14:24:14 Received message from Master: op=Shutter serial=279814 14:24:14 Shutter LASER close 14:24:14 Received message from Camera: op=State serial=279816 14:24:14 GetSingleValue result=40 Value=cccccccc 14:24:14 SkyScan query 14:24:15 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:24:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:15 Parameters OK 14:24:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:15 Set A/D data flow result=40 14:24:15 Set A/D channel type result=40 14:24:15 Set A/D encoding result=40 14:24:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:15 Set channel filter=0.000000e+000 result=40 14:24:15 Config A/D Result=40 14:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:15 Get A/D filter: -9.255963e+061 result=40 14:24:15 Get A/D value=-858993460 result=40 14:24:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:15 Parameters OK 14:24:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:15 Set A/D data flow result=40 14:24:15 Set A/D channel type result=40 14:24:15 Set A/D encoding result=40 14:24:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:15 Set channel filter=0.000000e+000 result=40 14:24:15 Config A/D Result=40 14:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:15 Get A/D filter: -9.255963e+061 result=40 14:24:15 Get A/D value=-858993460 result=40 14:24:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:15 Aux= 14:24:15 Message to Camera, serial 279816 queued 14:24:51 Received message from Master: op=PointingHead serial=279829 14:24:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:24:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:24:52 Point started: ret=0 14:24:52 point_skyscan result=0 14:24:52 Check angles 14:24:52 SkyScan query 14:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.13<-13542 Statuses=0008 0009 14:24:53 Msec=0 True Az=112.995 Ze=-23.13 Az status=0008 Ze status=0009 14:24:53 Check angles 14:24:53 SkyScan query 14:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.505<-14967 Statuses=0008 0009 14:24:54 Msec=750 True Az=112.995 Ze=-44.505 Az status=0008 Ze status=0009 14:24:54 Check angles 14:24:54 SkyScan query 14:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.88<-16392 Statuses=0008 0009 14:24:55 Msec=1500 True Az=112.995 Ze=-65.88 Az status=0008 Ze status=0009 14:24:55 Check angles 14:24:55 SkyScan query 14:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.85<-17790 Statuses=0008 0009 14:24:55 Msec=2250 True Az=112.995 Ze=-86.85 Az status=0008 Ze status=0009 14:24:56 Check angles 14:24:56 SkyScan query 14:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.82<-19188 Statuses=0008 0009 14:24:56 Msec=3000 True Az=112.995 Ze=-107.82 Az status=0008 Ze status=0009 14:24:56 Check angles 14:24:56 SkyScan query 14:24:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.76<-20584 Statuses=0008 0009 14:24:57 Msec=3750 True Az=112.995 Ze=-128.76 Az status=0008 Ze status=0009 14:24:57 Check angles 14:24:57 SkyScan query 14:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.745<-21983 Statuses=0008 0009 14:24:58 Msec=4500 True Az=112.995 Ze=-149.745 Az status=0008 Ze status=0009 14:24:58 Check angles 14:24:58 SkyScan query 14:24:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.655<-23377 Statuses=0008 0009 14:24:58 Msec=5250 True Az=112.995 Ze=-170.655 Az status=0008 Ze status=0009 14:24:59 Check angles 14:24:59 SkyScan query 14:24:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:24:59 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:24:59 Message to Master queued w/err=0: serial=279829 error=0 14:25:04 Received message from Master: op=Filter serial=279830 14:25:04 Color wheel filter change from 0 to 0 14:25:04 FLIGetFilterPos err=0 currentPosition=0 14:25:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:04 Filter is already there-color wheel unchanged 14:25:04 Received message from Master: op=Shutter serial=279831 14:25:04 Shutter LASER open 14:25:04 Received message from Camera: op=State serial=279833 14:25:04 GetSingleValue result=40 Value=cccccccc 14:25:04 SkyScan query 14:25:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:25:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:05 Parameters OK 14:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:05 Set A/D data flow result=40 14:25:05 Set A/D channel type result=40 14:25:05 Set A/D encoding result=40 14:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:05 Set channel filter=0.000000e+000 result=40 14:25:05 Config A/D Result=40 14:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:05 Get A/D filter: -9.255963e+061 result=40 14:25:05 Get A/D value=-858993460 result=40 14:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:05 Parameters OK 14:25:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:05 Set A/D data flow result=40 14:25:05 Set A/D channel type result=40 14:25:05 Set A/D encoding result=40 14:25:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:05 Set channel filter=0.000000e+000 result=40 14:25:05 Config A/D Result=40 14:25:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:05 Get A/D filter: -9.255963e+061 result=40 14:25:05 Get A/D value=-858993460 result=40 14:25:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:05 Aux= 14:25:05 Message to Camera, serial 279833 queued 14:25:13 Received message from Master: op=Shutter serial=279843 14:25:13 Shutter LASER close 14:25:14 Received message from Master: op=PointingHead serial=279847 14:25:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:25:14 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:25:14 Point started: ret=0 14:25:14 point_skyscan result=0 14:25:15 Check angles 14:25:15 SkyScan query 14:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.845<-21523 Statuses=0008 0009 14:25:16 Msec=0 True Az=112.995 Ze=-142.845 Az status=0008 Ze status=0009 14:25:16 Check angles 14:25:16 SkyScan query 14:25:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.425<-20095 Statuses=0008 0009 14:25:16 Msec=750 True Az=112.995 Ze=-121.425 Az status=0008 Ze status=0009 14:25:17 Check angles 14:25:17 SkyScan query 14:25:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.455<-18697 Statuses=0008 0009 14:25:17 Msec=1500 True Az=112.995 Ze=-100.455 Az status=0008 Ze status=0009 14:25:17 Check angles 14:25:17 SkyScan query 14:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.485<-17299 Statuses=0008 0009 14:25:18 Msec=2250 True Az=112.995 Ze=-79.485 Az status=0008 Ze status=0009 14:25:18 Check angles 14:25:18 SkyScan query 14:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.545<-15903 Statuses=0008 0009 14:25:19 Msec=3000 True Az=112.995 Ze=-58.545 Az status=0008 Ze status=0009 14:25:19 Check angles 14:25:19 SkyScan query 14:25:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.605<-14507 Statuses=0008 0009 14:25:19 Msec=3750 True Az=112.995 Ze=-37.605 Az status=0008 Ze status=0009 14:25:20 Check angles 14:25:20 SkyScan query 14:25:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.635<-13109 Statuses=0008 0009 14:25:20 Msec=4500 True Az=112.995 Ze=-16.635 Az status=0008 Ze status=0009 14:25:20 Check angles 14:25:20 SkyScan query 14:25:21 SkyScan query done: ret=0 az=112.995<-7533 ze=4.245<-11717 Statuses=0008 0009 14:25:21 Msec=5250 True Az=112.995 Ze=4.245 Az status=0008 Ze status=0009 14:25:21 Check angles 14:25:21 SkyScan query 14:25:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:25:22 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:25:22 Message to Master queued w/err=0: serial=279847 error=0 14:25:27 Received message from Master: op=Filter serial=279848 14:25:27 Color wheel filter change from 0 to 0 14:25:27 FLIGetFilterPos err=0 currentPosition=0 14:25:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:27 Filter is already there-color wheel unchanged 14:25:27 Received message from Master: op=Shutter serial=279849 14:25:27 Shutter LASER close 14:25:27 Received message from Camera: op=State serial=279851 14:25:27 GetSingleValue result=40 Value=cccccccc 14:25:27 SkyScan query 14:25:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:25:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:28 Parameters OK 14:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:28 Set A/D data flow result=40 14:25:28 Set A/D channel type result=40 14:25:28 Set A/D encoding result=40 14:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:28 Set channel filter=0.000000e+000 result=40 14:25:28 Config A/D Result=40 14:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:28 Get A/D filter: -9.255963e+061 result=40 14:25:28 Get A/D value=-858993460 result=40 14:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:28 Parameters OK 14:25:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:28 Set A/D data flow result=40 14:25:28 Set A/D channel type result=40 14:25:28 Set A/D encoding result=40 14:25:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:28 Set channel filter=0.000000e+000 result=40 14:25:28 Config A/D Result=40 14:25:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:28 Get A/D filter: -9.255963e+061 result=40 14:25:28 Get A/D value=-858993460 result=40 14:25:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:28 Aux= 14:25:28 Message to Camera, serial 279851 queued 14:26:04 Received message from Master: op=PointingHead serial=279864 14:26:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:26:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:26:05 Point started: ret=0 14:26:05 point_skyscan result=0 14:26:06 Check angles 14:26:06 SkyScan query 14:26:06 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:06 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:26:06 Message to Master queued w/err=0: serial=279864 error=0 14:26:11 Received message from Master: op=Filter serial=279865 14:26:11 Color wheel filter change from 0 to 0 14:26:11 FLIGetFilterPos err=0 currentPosition=0 14:26:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:11 Filter is already there-color wheel unchanged 14:26:11 Received message from Master: op=Shutter serial=279866 14:26:11 Shutter LASER close 14:26:11 Received message from Camera: op=State serial=279868 14:26:11 GetSingleValue result=40 Value=cccccccc 14:26:11 SkyScan query 14:26:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:26:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:12 Parameters OK 14:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:12 Set A/D data flow result=40 14:26:12 Set A/D channel type result=40 14:26:12 Set A/D encoding result=40 14:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:12 Set channel filter=0.000000e+000 result=40 14:26:12 Config A/D Result=40 14:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:12 Get A/D filter: -9.255963e+061 result=40 14:26:12 Get A/D value=-858993460 result=40 14:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:12 Parameters OK 14:26:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:12 Set A/D data flow result=40 14:26:12 Set A/D channel type result=40 14:26:12 Set A/D encoding result=40 14:26:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:12 Set channel filter=0.000000e+000 result=40 14:26:12 Config A/D Result=40 14:26:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:12 Get A/D filter: -9.255963e+061 result=40 14:26:12 Get A/D value=-858993460 result=40 14:26:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:12 Aux= 14:26:12 Message to Camera, serial 279868 queued 14:26:49 Received message from Master: op=PointingHead serial=279881 14:26:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:26:49 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:26:49 Point started: ret=0 14:26:49 point_skyscan result=0 14:26:50 Check angles 14:26:50 SkyScan query 14:26:50 SkyScan query done: ret=0 az=136.305<-9087 ze=-6.51<-12434 Statuses=0009 0008 14:26:50 Msec=0 True Az=136.305 Ze=-6.51 Az status=0009 Ze status=0008 14:26:51 Check angles 14:26:51 SkyScan query 14:26:51 SkyScan query done: ret=0 az=153.72<-10248 ze=-6.495<-12433 Statuses=0009 0008 14:26:51 Msec=750 True Az=153.72 Ze=-6.495 Az status=0009 Ze status=0008 14:26:51 Check angles 14:26:51 SkyScan query 14:26:52 SkyScan query done: ret=0 az=171.165<-11411 ze=-6.495<-12433 Statuses=0009 0008 14:26:52 Msec=1500 True Az=171.165 Ze=-6.495 Az status=0009 Ze status=0008 14:26:52 Check angles 14:26:52 SkyScan query 14:26:53 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 14:26:53 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 14:26:53 Message to Master queued w/err=0: serial=279881 error=0 14:26:58 Received message from Master: op=Filter serial=279882 14:26:58 Color wheel filter change from 0 to 0 14:26:58 FLIGetFilterPos err=0 currentPosition=0 14:26:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:58 Filter is already there-color wheel unchanged 14:26:58 Received message from Master: op=Shutter serial=279883 14:26:58 Shutter LASER close 14:26:58 Received message from Camera: op=State serial=279885 14:26:58 GetSingleValue result=40 Value=cccccccc 14:26:58 SkyScan query 14:26:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:59 Parameters OK 14:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:59 Set A/D data flow result=40 14:26:59 Set A/D channel type result=40 14:26:59 Set A/D encoding result=40 14:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:59 Set channel filter=0.000000e+000 result=40 14:26:59 Config A/D Result=40 14:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:59 Get A/D filter: -9.255963e+061 result=40 14:26:59 Get A/D value=-858993460 result=40 14:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:59 Parameters OK 14:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:59 Set A/D data flow result=40 14:26:59 Set A/D channel type result=40 14:26:59 Set A/D encoding result=40 14:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:59 Set channel filter=0.000000e+000 result=40 14:26:59 Config A/D Result=40 14:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:59 Get A/D filter: -9.255963e+061 result=40 14:26:59 Get A/D value=-858993460 result=40 14:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:59 Aux= 14:26:59 Message to Camera, serial 279885 queued 14:27:35 Received message from Master: op=PointingHead serial=279898 14:27:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:27:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:27:36 Point started: ret=0 14:27:36 point_skyscan result=0 14:27:36 Check angles 14:27:36 SkyScan query 14:27:37 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 14:27:37 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 14:27:37 Check angles 14:27:37 SkyScan query 14:27:38 SkyScan query done: ret=0 az=135.12<-9008 ze=6.495<-11567 Statuses=0009 0008 14:27:38 Msec=750 True Az=135.12 Ze=6.495 Az status=0009 Ze status=0008 14:27:38 Check angles 14:27:38 SkyScan query 14:27:39 SkyScan query done: ret=0 az=117.285<-7819 ze=6.495<-11567 Statuses=0009 0008 14:27:39 Msec=1500 True Az=117.285 Ze=6.495 Az status=0009 Ze status=0008 14:27:39 Check angles 14:27:39 SkyScan query 14:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:39 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:27:39 Message to Master queued w/err=0: serial=279898 error=0 14:27:44 Received message from Master: op=Filter serial=279899 14:27:44 Color wheel filter change from 0 to 0 14:27:44 FLIGetFilterPos err=0 currentPosition=0 14:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:44 Filter is already there-color wheel unchanged 14:27:45 Received message from Master: op=Shutter serial=279900 14:27:45 Shutter LASER close 14:27:45 Received message from Camera: op=State serial=279902 14:27:45 GetSingleValue result=40 Value=cccccccc 14:27:45 SkyScan query 14:27:45 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:45 Parameters OK 14:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:45 Set A/D data flow result=40 14:27:45 Set A/D channel type result=40 14:27:45 Set A/D encoding result=40 14:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:45 Set channel filter=0.000000e+000 result=40 14:27:45 Config A/D Result=40 14:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:45 Get A/D filter: -9.255963e+061 result=40 14:27:45 Get A/D value=-858993460 result=40 14:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:45 Parameters OK 14:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:45 Set A/D data flow result=40 14:27:45 Set A/D channel type result=40 14:27:45 Set A/D encoding result=40 14:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:45 Set channel filter=0.000000e+000 result=40 14:27:45 Config A/D Result=40 14:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:45 Get A/D filter: -9.255963e+061 result=40 14:27:45 Get A/D value=-858993460 result=40 14:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:45 Aux= 14:27:45 Message to Camera, serial 279902 queued 14:28:22 Received message from Master: op=PointingHead serial=279915 14:28:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:28:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:28:22 Point started: ret=0 14:28:22 point_skyscan result=0 14:28:23 Check angles 14:28:23 SkyScan query 14:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.865<-13591 Statuses=0008 0009 14:28:24 Msec=0 True Az=112.995 Ze=-23.865 Az status=0008 Ze status=0009 14:28:24 Check angles 14:28:24 SkyScan query 14:28:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.79<-14986 Statuses=0008 0009 14:28:24 Msec=750 True Az=112.995 Ze=-44.79 Az status=0008 Ze status=0009 14:28:25 Check angles 14:28:25 SkyScan query 14:28:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.745<-16383 Statuses=0008 0009 14:28:25 Msec=1500 True Az=112.995 Ze=-65.745 Az status=0008 Ze status=0009 14:28:25 Check angles 14:28:25 SkyScan query 14:28:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 14:28:26 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 14:28:26 Check angles 14:28:26 SkyScan query 14:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.7<-19180 Statuses=0008 0009 14:28:27 Msec=3000 True Az=112.995 Ze=-107.7 Az status=0008 Ze status=0009 14:28:27 Check angles 14:28:27 SkyScan query 14:28:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 14:28:27 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 14:28:28 Check angles 14:28:28 SkyScan query 14:28:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 14:28:28 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 14:28:28 Check angles 14:28:28 SkyScan query 14:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.55<-23370 Statuses=0008 0009 14:28:29 Msec=5250 True Az=112.995 Ze=-170.55 Az status=0008 Ze status=0009 14:28:29 Check angles 14:28:29 SkyScan query 14:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:28:30 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:28:30 Message to Master queued w/err=0: serial=279915 error=0 14:28:35 Received message from Master: op=Filter serial=279916 14:28:35 Color wheel filter change from 0 to 0 14:28:35 FLIGetFilterPos err=0 currentPosition=0 14:28:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:35 Filter is already there-color wheel unchanged 14:28:35 Received message from Master: op=Shutter serial=279917 14:28:35 Shutter LASER open 14:28:35 Received message from Camera: op=State serial=279919 14:28:35 GetSingleValue result=40 Value=cccccccc 14:28:35 SkyScan query 14:28:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:28:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:36 Parameters OK 14:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:36 Set A/D data flow result=40 14:28:36 Set A/D channel type result=40 14:28:36 Set A/D encoding result=40 14:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:36 Set channel filter=0.000000e+000 result=40 14:28:36 Config A/D Result=40 14:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:36 Get A/D filter: -9.255963e+061 result=40 14:28:36 Get A/D value=-858993460 result=40 14:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:36 Parameters OK 14:28:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:36 Set A/D data flow result=40 14:28:36 Set A/D channel type result=40 14:28:36 Set A/D encoding result=40 14:28:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:36 Set channel filter=0.000000e+000 result=40 14:28:36 Config A/D Result=40 14:28:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:36 Get A/D filter: -9.255963e+061 result=40 14:28:36 Get A/D value=-858993460 result=40 14:28:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:36 Aux= 14:28:36 Message to Camera, serial 279919 queued 14:28:44 Received message from Master: op=Shutter serial=279929 14:28:44 Shutter LASER close 14:28:44 Received message from Master: op=PointingHead serial=279933 14:28:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:28:44 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:28:45 Point started: ret=0 14:28:45 point_skyscan result=0 14:28:46 Check angles 14:28:46 SkyScan query 14:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.49<-21566 Statuses=0008 0009 14:28:46 Msec=0 True Az=112.995 Ze=-143.49 Az status=0008 Ze status=0009 14:28:46 Check angles 14:28:46 SkyScan query 14:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.565<-20171 Statuses=0008 0009 14:28:47 Msec=750 True Az=112.995 Ze=-122.565 Az status=0008 Ze status=0009 14:28:47 Check angles 14:28:47 SkyScan query 14:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.61<-18774 Statuses=0008 0009 14:28:48 Msec=1500 True Az=112.995 Ze=-101.61 Az status=0008 Ze status=0009 14:28:48 Check angles 14:28:48 SkyScan query 14:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.625<-17375 Statuses=0008 0009 14:28:48 Msec=2250 True Az=112.995 Ze=-80.625 Az status=0008 Ze status=0009 14:28:49 Check angles 14:28:49 SkyScan query 14:28:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.7<-15980 Statuses=0008 0009 14:28:49 Msec=3000 True Az=112.995 Ze=-59.7 Az status=0008 Ze status=0009 14:28:49 Check angles 14:28:49 SkyScan query 14:28:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.745<-14583 Statuses=0008 0009 14:28:50 Msec=3750 True Az=112.995 Ze=-38.745 Az status=0008 Ze status=0009 14:28:50 Check angles 14:28:50 SkyScan query 14:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.775<-13185 Statuses=0008 0009 14:28:51 Msec=4500 True Az=112.995 Ze=-17.775 Az status=0008 Ze status=0009 14:28:51 Check angles 14:28:51 SkyScan query 14:28:51 SkyScan query done: ret=0 az=112.995<-7533 ze=3.18<-11788 Statuses=0008 0009 14:28:51 Msec=5250 True Az=112.995 Ze=3.18 Az status=0008 Ze status=0009 14:28:52 Check angles 14:28:52 SkyScan query 14:28:52 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:28:52 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:28:52 Message to Master queued w/err=0: serial=279933 error=0 14:28:57 Received message from Master: op=Filter serial=279934 14:28:57 Color wheel filter change from 0 to 0 14:28:57 FLIGetFilterPos err=0 currentPosition=0 14:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:57 Filter is already there-color wheel unchanged 14:28:57 Received message from Master: op=Shutter serial=279935 14:28:57 Shutter LASER close 14:28:57 Received message from Camera: op=State serial=279937 14:28:57 GetSingleValue result=40 Value=cccccccc 14:28:57 SkyScan query 14:28:58 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:58 Parameters OK 14:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:58 Set A/D data flow result=40 14:28:58 Set A/D channel type result=40 14:28:58 Set A/D encoding result=40 14:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:58 Set channel filter=0.000000e+000 result=40 14:28:58 Config A/D Result=40 14:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:58 Get A/D filter: -9.255963e+061 result=40 14:28:58 Get A/D value=-858993460 result=40 14:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:58 Parameters OK 14:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:58 Set A/D data flow result=40 14:28:58 Set A/D channel type result=40 14:28:58 Set A/D encoding result=40 14:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:58 Set channel filter=0.000000e+000 result=40 14:28:58 Config A/D Result=40 14:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:58 Get A/D filter: -9.255963e+061 result=40 14:28:58 Get A/D value=-858993460 result=40 14:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:58 Aux= 14:28:58 Message to Camera, serial 279937 queued 14:29:35 Received message from Master: op=PointingHead serial=279950 14:29:35 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:29:35 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:29:35 Point started: ret=0 14:29:35 point_skyscan result=0 14:29:36 Check angles 14:29:36 SkyScan query 14:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:37 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:29:37 Message to Master queued w/err=0: serial=279950 error=0 14:29:42 Received message from Master: op=Filter serial=279951 14:29:42 Color wheel filter change from 0 to 0 14:29:42 FLIGetFilterPos err=0 currentPosition=0 14:29:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:42 Filter is already there-color wheel unchanged 14:29:42 Received message from Master: op=Shutter serial=279952 14:29:42 Shutter LASER close 14:29:42 Received message from Camera: op=State serial=279954 14:29:42 GetSingleValue result=40 Value=cccccccc 14:29:42 SkyScan query 14:29:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:42 Parameters OK 14:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:42 Set A/D data flow result=40 14:29:42 Set A/D channel type result=40 14:29:42 Set A/D encoding result=40 14:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:42 Set channel filter=0.000000e+000 result=40 14:29:42 Config A/D Result=40 14:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:42 Get A/D filter: -9.255963e+061 result=40 14:29:42 Get A/D value=-858993460 result=40 14:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:42 Parameters OK 14:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:42 Set A/D data flow result=40 14:29:42 Set A/D channel type result=40 14:29:42 Set A/D encoding result=40 14:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:42 Set channel filter=0.000000e+000 result=40 14:29:42 Config A/D Result=40 14:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:42 Get A/D filter: -9.255963e+061 result=40 14:29:42 Get A/D value=-858993460 result=40 14:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:42 Aux= 14:29:42 Message to Camera, serial 279954 queued 14:30:19 Received message from Master: op=PointingHead serial=279967 14:30:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:30:19 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:30:20 Point started: ret=0 14:30:20 point_skyscan result=0 14:30:20 Check angles 14:30:20 SkyScan query 14:30:21 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:21 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:30:21 Message to Master queued w/err=0: serial=279967 error=0 14:30:26 Received message from Master: op=Filter serial=279968 14:30:26 Color wheel filter change from 0 to 0 14:30:26 FLIGetFilterPos err=0 currentPosition=0 14:30:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:26 Filter is already there-color wheel unchanged 14:30:26 Received message from Master: op=Shutter serial=279969 14:30:26 Shutter LASER close 14:30:26 Received message from Camera: op=State serial=279971 14:30:26 GetSingleValue result=40 Value=cccccccc 14:30:26 SkyScan query 14:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:30:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:27 Parameters OK 14:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:27 Set A/D data flow result=40 14:30:27 Set A/D channel type result=40 14:30:27 Set A/D encoding result=40 14:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:27 Set channel filter=0.000000e+000 result=40 14:30:27 Config A/D Result=40 14:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:27 Get A/D filter: -9.255963e+061 result=40 14:30:27 Get A/D value=-858993460 result=40 14:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:27 Parameters OK 14:30:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:27 Set A/D data flow result=40 14:30:27 Set A/D channel type result=40 14:30:27 Set A/D encoding result=40 14:30:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:27 Set channel filter=0.000000e+000 result=40 14:30:27 Config A/D Result=40 14:30:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:27 Get A/D filter: -9.255963e+061 result=40 14:30:27 Get A/D value=-858993460 result=40 14:30:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:27 Aux= 14:30:27 Message to Camera, serial 279971 queued 14:31:04 Received message from Master: op=PointingHead serial=279984 14:31:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:31:04 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:31:04 Point started: ret=0 14:31:04 point_skyscan result=0 14:31:05 Check angles 14:31:05 SkyScan query 14:31:05 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:05 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:31:05 Message to Master queued w/err=0: serial=279984 error=0 14:31:10 Received message from Master: op=Filter serial=279985 14:31:10 Color wheel filter change from 0 to 0 14:31:10 FLIGetFilterPos err=0 currentPosition=0 14:31:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:10 Filter is already there-color wheel unchanged 14:31:10 Received message from Master: op=Shutter serial=279986 14:31:10 Shutter LASER close 14:31:10 Received message from Camera: op=State serial=279988 14:31:10 GetSingleValue result=40 Value=cccccccc 14:31:10 SkyScan query 14:31:11 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:31:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:11 Parameters OK 14:31:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:11 Set A/D data flow result=40 14:31:11 Set A/D channel type result=40 14:31:11 Set A/D encoding result=40 14:31:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:11 Set channel filter=0.000000e+000 result=40 14:31:11 Config A/D Result=40 14:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:11 Get A/D filter: -9.255963e+061 result=40 14:31:11 Get A/D value=-858993460 result=40 14:31:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:11 Parameters OK 14:31:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:11 Set A/D data flow result=40 14:31:11 Set A/D channel type result=40 14:31:11 Set A/D encoding result=40 14:31:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:11 Set channel filter=0.000000e+000 result=40 14:31:11 Config A/D Result=40 14:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:11 Get A/D filter: -9.255963e+061 result=40 14:31:11 Get A/D value=-858993460 result=40 14:31:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:11 Aux= 14:31:11 Message to Camera, serial 279988 queued 14:31:48 Received message from Master: op=PointingHead serial=280001 14:31:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:31:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:31:48 Point started: ret=0 14:31:48 point_skyscan result=0 14:31:49 Check angles 14:31:49 SkyScan query 14:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.265<-13551 Statuses=0008 0009 14:31:50 Msec=0 True Az=112.995 Ze=-23.265 Az status=0008 Ze status=0009 14:31:50 Check angles 14:31:50 SkyScan query 14:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.64<-14976 Statuses=0008 0009 14:31:50 Msec=750 True Az=112.995 Ze=-44.64 Az status=0008 Ze status=0009 14:31:51 Check angles 14:31:51 SkyScan query 14:31:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-66.015<-16401 Statuses=0008 0009 14:31:51 Msec=1500 True Az=112.995 Ze=-66.015 Az status=0008 Ze status=0009 14:31:51 Check angles 14:31:51 SkyScan query 14:31:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-87<-17800 Statuses=0008 0009 14:31:52 Msec=2250 True Az=112.995 Ze=-87 Az status=0008 Ze status=0009 14:31:52 Check angles 14:31:52 SkyScan query 14:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.955<-19197 Statuses=0008 0009 14:31:53 Msec=3000 True Az=112.995 Ze=-107.955 Az status=0008 Ze status=0009 14:31:53 Check angles 14:31:53 SkyScan query 14:31:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.895<-20593 Statuses=0008 0009 14:31:53 Msec=3750 True Az=112.995 Ze=-128.895 Az status=0008 Ze status=0009 14:31:54 Check angles 14:31:54 SkyScan query 14:31:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.865<-21991 Statuses=0008 0009 14:31:54 Msec=4500 True Az=112.995 Ze=-149.865 Az status=0008 Ze status=0009 14:31:54 Check angles 14:31:54 SkyScan query 14:31:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.06<-23404 Statuses=0008 0009 14:31:55 Msec=5250 True Az=112.995 Ze=-171.06 Az status=0008 Ze status=0009 14:31:55 Check angles 14:31:55 SkyScan query 14:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:31:56 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:31:56 Message to Master queued w/err=0: serial=280001 error=0 14:32:01 Received message from Master: op=Filter serial=280002 14:32:01 Color wheel filter change from 0 to 0 14:32:01 FLIGetFilterPos err=0 currentPosition=0 14:32:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:01 Filter is already there-color wheel unchanged 14:32:01 Received message from Master: op=Shutter serial=280003 14:32:01 Shutter LASER open 14:32:01 Received message from Camera: op=State serial=280005 14:32:01 GetSingleValue result=40 Value=cccccccc 14:32:01 SkyScan query 14:32:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:32:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:02 Parameters OK 14:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:02 Set A/D data flow result=40 14:32:02 Set A/D channel type result=40 14:32:02 Set A/D encoding result=40 14:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:02 Set channel filter=0.000000e+000 result=40 14:32:02 Config A/D Result=40 14:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:02 Get A/D filter: -9.255963e+061 result=40 14:32:02 Get A/D value=-858993460 result=40 14:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:02 Parameters OK 14:32:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:02 Set A/D data flow result=40 14:32:02 Set A/D channel type result=40 14:32:02 Set A/D encoding result=40 14:32:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:02 Set channel filter=0.000000e+000 result=40 14:32:02 Config A/D Result=40 14:32:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:02 Get A/D filter: -9.255963e+061 result=40 14:32:02 Get A/D value=-858993460 result=40 14:32:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:02 Aux= 14:32:02 Message to Camera, serial 280005 queued 14:32:10 Received message from Master: op=Shutter serial=280015 14:32:10 Shutter LASER close 14:32:11 Received message from Master: op=PointingHead serial=280019 14:32:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:32:11 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:32:11 Point started: ret=0 14:32:11 point_skyscan result=0 14:32:12 Check angles 14:32:12 SkyScan query 14:32:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.235<-21549 Statuses=0008 0009 14:32:12 Msec=0 True Az=112.995 Ze=-143.235 Az status=0008 Ze status=0009 14:32:12 Check angles 14:32:12 SkyScan query 14:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.28<-20152 Statuses=0008 0009 14:32:13 Msec=750 True Az=112.995 Ze=-122.28 Az status=0008 Ze status=0009 14:32:13 Check angles 14:32:13 SkyScan query 14:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.355<-18757 Statuses=0008 0009 14:32:14 Msec=1500 True Az=112.995 Ze=-101.355 Az status=0008 Ze status=0009 14:32:14 Check angles 14:32:14 SkyScan query 14:32:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.37<-17358 Statuses=0008 0009 14:32:14 Msec=2250 True Az=112.995 Ze=-80.37 Az status=0008 Ze status=0009 14:32:15 Check angles 14:32:15 SkyScan query 14:32:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.43<-15962 Statuses=0008 0009 14:32:15 Msec=3000 True Az=112.995 Ze=-59.43 Az status=0008 Ze status=0009 14:32:15 Check angles 14:32:15 SkyScan query 14:32:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.445<-14563 Statuses=0008 0009 14:32:16 Msec=3750 True Az=112.995 Ze=-38.445 Az status=0008 Ze status=0009 14:32:16 Check angles 14:32:16 SkyScan query 14:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.025<-13135 Statuses=0008 0009 14:32:17 Msec=4500 True Az=112.995 Ze=-17.025 Az status=0008 Ze status=0009 14:32:17 Check angles 14:32:17 SkyScan query 14:32:17 SkyScan query done: ret=0 az=112.995<-7533 ze=3.93<-11738 Statuses=0008 0009 14:32:17 Msec=5250 True Az=112.995 Ze=3.93 Az status=0008 Ze status=0009 14:32:18 Check angles 14:32:18 SkyScan query 14:32:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:32:18 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:32:18 Message to Master queued w/err=0: serial=280019 error=0 14:32:23 Received message from Master: op=Filter serial=280020 14:32:23 Color wheel filter change from 0 to 0 14:32:23 FLIGetFilterPos err=0 currentPosition=0 14:32:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:23 Filter is already there-color wheel unchanged 14:32:23 Received message from Master: op=Shutter serial=280021 14:32:23 Shutter LASER close 14:32:24 Received message from Camera: op=State serial=280023 14:32:24 GetSingleValue result=40 Value=cccccccc 14:32:24 SkyScan query 14:32:24 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:32:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:24 Parameters OK 14:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:24 Set A/D data flow result=40 14:32:24 Set A/D channel type result=40 14:32:24 Set A/D encoding result=40 14:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:24 Set channel filter=0.000000e+000 result=40 14:32:24 Config A/D Result=40 14:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:24 Get A/D filter: -9.255963e+061 result=40 14:32:24 Get A/D value=-858993460 result=40 14:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:24 Parameters OK 14:32:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:24 Set A/D data flow result=40 14:32:24 Set A/D channel type result=40 14:32:24 Set A/D encoding result=40 14:32:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:24 Set channel filter=0.000000e+000 result=40 14:32:24 Config A/D Result=40 14:32:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:24 Get A/D filter: -9.255963e+061 result=40 14:32:24 Get A/D value=-858993460 result=40 14:32:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:24 Aux= 14:32:24 Message to Camera, serial 280023 queued 14:33:01 Received message from Master: op=PointingHead serial=280036 14:33:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:33:01 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:33:01 Point started: ret=0 14:33:01 point_skyscan result=0 14:33:02 Check angles 14:33:02 SkyScan query 14:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:03 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:33:03 Message to Master queued w/err=0: serial=280036 error=0 14:33:08 Received message from Master: op=Filter serial=280037 14:33:08 Color wheel filter change from 0 to 0 14:33:08 FLIGetFilterPos err=0 currentPosition=0 14:33:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:08 Filter is already there-color wheel unchanged 14:33:08 Received message from Master: op=Shutter serial=280038 14:33:08 Shutter LASER close 14:33:08 Received message from Camera: op=State serial=280040 14:33:08 GetSingleValue result=40 Value=cccccccc 14:33:08 SkyScan query 14:33:08 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:33:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:08 Parameters OK 14:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:08 Set A/D data flow result=40 14:33:08 Set A/D channel type result=40 14:33:08 Set A/D encoding result=40 14:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:08 Set channel filter=0.000000e+000 result=40 14:33:08 Config A/D Result=40 14:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:08 Get A/D filter: -9.255963e+061 result=40 14:33:08 Get A/D value=-858993460 result=40 14:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:08 Parameters OK 14:33:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:08 Set A/D data flow result=40 14:33:08 Set A/D channel type result=40 14:33:08 Set A/D encoding result=40 14:33:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:08 Set channel filter=0.000000e+000 result=40 14:33:08 Config A/D Result=40 14:33:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:08 Get A/D filter: -9.255963e+061 result=40 14:33:08 Get A/D value=-858993460 result=40 14:33:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:08 Aux= 14:33:08 Message to Camera, serial 280040 queued 14:33:35 Received message from Master: op=Identify serial=280041 14:33:45 Received message from Master: op=PointingHead serial=280056 14:33:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:33:45 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:33:46 Point started: ret=0 14:33:46 point_skyscan result=0 14:33:46 Check angles 14:33:46 SkyScan query 14:33:47 SkyScan query done: ret=0 az=135.885<-9059 ze=-6.51<-12434 Statuses=0009 0008 14:33:47 Msec=0 True Az=135.885 Ze=-6.51 Az status=0009 Ze status=0008 14:33:47 Check angles 14:33:47 SkyScan query 14:33:48 SkyScan query done: ret=0 az=153.435<-10229 ze=-6.495<-12433 Statuses=0009 0008 14:33:48 Msec=750 True Az=153.435 Ze=-6.495 Az status=0009 Ze status=0008 14:33:48 Check angles 14:33:48 SkyScan query 14:33:48 SkyScan query done: ret=0 az=170.775<-11385 ze=-6.495<-12433 Statuses=0009 0008 14:33:48 Msec=1500 True Az=170.775 Ze=-6.495 Az status=0009 Ze status=0008 14:33:49 Check angles 14:33:49 SkyScan query 14:33:49 SkyScan query done: ret=0 az=176.025<-11735 ze=-6.495<-12433 Statuses=0008 0008 14:33:49 Msec=2250 True Az=176.025 Ze=-6.495 Az status=0008 Ze status=0008 14:33:49 Message to Master queued w/err=0: serial=280056 error=0 14:33:54 Received message from Master: op=Filter serial=280057 14:33:54 Color wheel filter change from 0 to 0 14:33:54 FLIGetFilterPos err=0 currentPosition=0 14:33:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:54 Filter is already there-color wheel unchanged 14:33:54 Received message from Master: op=Shutter serial=280058 14:33:54 Shutter LASER close 14:33:54 Received message from Camera: op=State serial=280060 14:33:54 GetSingleValue result=40 Value=cccccccc 14:33:54 SkyScan query 14:33:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:55 Parameters OK 14:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:55 Set A/D data flow result=40 14:33:55 Set A/D channel type result=40 14:33:55 Set A/D encoding result=40 14:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:55 Set channel filter=0.000000e+000 result=40 14:33:55 Config A/D Result=40 14:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:55 Get A/D filter: -9.255963e+061 result=40 14:33:55 Get A/D value=-858993460 result=40 14:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:55 Parameters OK 14:33:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:55 Set A/D data flow result=40 14:33:55 Set A/D channel type result=40 14:33:55 Set A/D encoding result=40 14:33:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:55 Set channel filter=0.000000e+000 result=40 14:33:55 Config A/D Result=40 14:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:55 Get A/D filter: -9.255963e+061 result=40 14:33:55 Get A/D value=-858993460 result=40 14:33:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:55 Aux= [UTC 2019-3-14 14:33:55] 14:33:55 Message to Camera, serial 280060 queued 14:34:32 Received message from Master: op=PointingHead serial=280073 14:34:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:34:32 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:34:32 Point started: ret=0 14:34:32 point_skyscan result=0 14:34:33 Check angles 14:34:33 SkyScan query 14:34:34 SkyScan query done: ret=0 az=152.61<-10174 ze=6.51<-11566 Statuses=0009 0008 14:34:34 Msec=0 True Az=152.61 Ze=6.51 Az status=0009 Ze status=0008 14:34:34 Check angles 14:34:34 SkyScan query 14:34:34 SkyScan query done: ret=0 az=134.73<-8982 ze=6.495<-11567 Statuses=0009 0008 14:34:34 Msec=750 True Az=134.73 Ze=6.495 Az status=0009 Ze status=0008 14:34:34 Check angles 14:34:34 SkyScan query 14:34:35 SkyScan query done: ret=0 az=117.24<-7816 ze=6.495<-11567 Statuses=0009 0008 14:34:35 Msec=1500 True Az=117.24 Ze=6.495 Az status=0009 Ze status=0008 14:34:35 Check angles 14:34:35 SkyScan query 14:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:36 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:34:36 Message to Master queued w/err=0: serial=280073 error=0 14:34:41 Received message from Master: op=Filter serial=280074 14:34:41 Color wheel filter change from 0 to 0 14:34:41 FLIGetFilterPos err=0 currentPosition=0 14:34:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:41 Filter is already there-color wheel unchanged 14:34:41 Received message from Master: op=Shutter serial=280075 14:34:41 Shutter LASER close 14:34:41 Received message from Camera: op=State serial=280077 14:34:41 GetSingleValue result=40 Value=cccccccc 14:34:41 SkyScan query 14:34:42 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:42 Parameters OK 14:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:42 Set A/D data flow result=40 14:34:42 Set A/D channel type result=40 14:34:42 Set A/D encoding result=40 14:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:42 Set channel filter=0.000000e+000 result=40 14:34:42 Config A/D Result=40 14:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:42 Get A/D filter: -9.255963e+061 result=40 14:34:42 Get A/D value=-858993460 result=40 14:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:42 Parameters OK 14:34:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:42 Set A/D data flow result=40 14:34:42 Set A/D channel type result=40 14:34:42 Set A/D encoding result=40 14:34:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:42 Set channel filter=0.000000e+000 result=40 14:34:42 Config A/D Result=40 14:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:42 Get A/D filter: -9.255963e+061 result=40 14:34:42 Get A/D value=-858993460 result=40 14:34:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:42 Aux= 14:34:42 Message to Camera, serial 280077 queued 14:35:18 Received message from Master: op=PointingHead serial=280090 14:35:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:35:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:35:19 Point started: ret=0 14:35:19 point_skyscan result=0 14:35:20 Check angles 14:35:20 SkyScan query 14:35:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.085<-13539 Statuses=0008 0009 14:35:20 Msec=0 True Az=112.995 Ze=-23.085 Az status=0008 Ze status=0009 14:35:20 Check angles 14:35:20 SkyScan query 14:35:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.07<-14938 Statuses=0008 0009 14:35:21 Msec=750 True Az=112.995 Ze=-44.07 Az status=0008 Ze status=0009 14:35:21 Check angles 14:35:21 SkyScan query 14:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-64.98<-16332 Statuses=0008 0009 14:35:22 Msec=1500 True Az=112.995 Ze=-64.98 Az status=0008 Ze status=0009 14:35:22 Check angles 14:35:22 SkyScan query 14:35:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-85.92<-17728 Statuses=0008 0009 14:35:22 Msec=2250 True Az=112.995 Ze=-85.92 Az status=0008 Ze status=0009 14:35:23 Check angles 14:35:23 SkyScan query 14:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.845<-19123 Statuses=0008 0009 14:35:23 Msec=3000 True Az=112.995 Ze=-106.845 Az status=0008 Ze status=0009 14:35:23 Check angles 14:35:23 SkyScan query 14:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.83<-20522 Statuses=0008 0009 14:35:24 Msec=3750 True Az=112.995 Ze=-127.83 Az status=0008 Ze status=0009 14:35:24 Check angles 14:35:24 SkyScan query 14:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.755<-21917 Statuses=0008 0009 14:35:25 Msec=4500 True Az=112.995 Ze=-148.755 Az status=0008 Ze status=0009 14:35:25 Check angles 14:35:25 SkyScan query 14:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-169.71<-23314 Statuses=0008 0009 14:35:25 Msec=5250 True Az=112.995 Ze=-169.71 Az status=0008 Ze status=0009 14:35:26 Check angles 14:35:26 SkyScan query 14:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:35:26 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:35:26 Message to Master queued w/err=0: serial=280090 error=0 14:35:31 Received message from Master: op=Filter serial=280091 14:35:31 Color wheel filter change from 0 to 0 14:35:31 FLIGetFilterPos err=0 currentPosition=0 14:35:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:31 Filter is already there-color wheel unchanged 14:35:31 Received message from Master: op=Shutter serial=280092 14:35:31 Shutter LASER open 14:35:31 Received message from Camera: op=State serial=280094 14:35:31 GetSingleValue result=40 Value=cccccccc 14:35:31 SkyScan query 14:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:35:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:32 Parameters OK 14:35:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:32 Set A/D data flow result=40 14:35:32 Set A/D channel type result=40 14:35:32 Set A/D encoding result=40 14:35:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:32 Set channel filter=0.000000e+000 result=40 14:35:32 Config A/D Result=40 14:35:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:32 Get A/D filter: -9.255963e+061 result=40 14:35:32 Get A/D value=-858993460 result=40 14:35:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:32 Parameters OK 14:35:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:32 Set A/D data flow result=40 14:35:32 Set A/D channel type result=40 14:35:32 Set A/D encoding result=40 14:35:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:32 Set channel filter=0.000000e+000 result=40 14:35:32 Config A/D Result=40 14:35:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:32 Get A/D filter: -9.255963e+061 result=40 14:35:32 Get A/D value=-858993460 result=40 14:35:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:32 Aux= 14:35:32 Message to Camera, serial 280094 queued 14:35:40 Received message from Master: op=Shutter serial=280104 14:35:40 Shutter LASER close 14:35:41 Received message from Master: op=PointingHead serial=280108 14:35:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:35:41 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:35:41 Point started: ret=0 14:35:41 point_skyscan result=0 14:35:42 Check angles 14:35:42 SkyScan query 14:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.28<-21552 Statuses=0008 0009 14:35:43 Msec=0 True Az=112.995 Ze=-143.28 Az status=0008 Ze status=0009 14:35:43 Check angles 14:35:43 SkyScan query 14:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.875<-20125 Statuses=0008 0009 14:35:43 Msec=750 True Az=112.995 Ze=-121.875 Az status=0008 Ze status=0009 14:35:44 Check angles 14:35:44 SkyScan query 14:35:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.965<-18731 Statuses=0008 0009 14:35:44 Msec=1500 True Az=112.995 Ze=-100.965 Az status=0008 Ze status=0009 14:35:44 Check angles 14:35:44 SkyScan query 14:35:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.995<-17333 Statuses=0008 0009 14:35:45 Msec=2250 True Az=112.995 Ze=-79.995 Az status=0008 Ze status=0009 14:35:45 Check angles 14:35:45 SkyScan query 14:35:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.055<-15937 Statuses=0008 0009 14:35:46 Msec=3000 True Az=112.995 Ze=-59.055 Az status=0008 Ze status=0009 14:35:46 Check angles 14:35:46 SkyScan query 14:35:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.01<-14534 Statuses=0008 0009 14:35:46 Msec=3750 True Az=112.995 Ze=-38.01 Az status=0008 Ze status=0009 14:35:47 Check angles 14:35:47 SkyScan query 14:35:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.1<-13140 Statuses=0008 0009 14:35:47 Msec=4500 True Az=112.995 Ze=-17.1 Az status=0008 Ze status=0009 14:35:47 Check angles 14:35:47 SkyScan query 14:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=3.885<-11741 Statuses=0008 0009 14:35:48 Msec=5250 True Az=112.995 Ze=3.885 Az status=0008 Ze status=0009 14:35:48 Check angles 14:35:48 SkyScan query 14:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:35:49 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:35:49 Message to Master queued w/err=0: serial=280108 error=0 14:35:54 Received message from Master: op=Filter serial=280109 14:35:54 Color wheel filter change from 0 to 0 14:35:54 FLIGetFilterPos err=0 currentPosition=0 14:35:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:54 Filter is already there-color wheel unchanged 14:35:54 Received message from Master: op=Shutter serial=280110 14:35:54 Shutter LASER close 14:35:54 Received message from Camera: op=State serial=280112 14:35:54 GetSingleValue result=40 Value=cccccccc 14:35:54 SkyScan query 14:35:55 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:35:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:55 Parameters OK 14:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:55 Set A/D data flow result=40 14:35:55 Set A/D channel type result=40 14:35:55 Set A/D encoding result=40 14:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:55 Set channel filter=0.000000e+000 result=40 14:35:55 Config A/D Result=40 14:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:55 Get A/D filter: -9.255963e+061 result=40 14:35:55 Get A/D value=-858993460 result=40 14:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:55 Parameters OK 14:35:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:55 Set A/D data flow result=40 14:35:55 Set A/D channel type result=40 14:35:55 Set A/D encoding result=40 14:35:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:55 Set channel filter=0.000000e+000 result=40 14:35:55 Config A/D Result=40 14:35:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:55 Get A/D filter: -9.255963e+061 result=40 14:35:55 Get A/D value=-858993460 result=40 14:35:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:55 Aux= 14:35:55 Message to Camera, serial 280112 queued 14:36:30 Received message from Master: op=PointingHead serial=280124 14:36:30 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:36:30 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:36:31 Point started: ret=0 14:36:31 point_skyscan result=0 14:36:32 Check angles 14:36:32 SkyScan query 14:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:32 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:36:32 Message to Master queued w/err=0: serial=280124 error=0 14:36:37 Received message from Master: op=Filter serial=280125 14:36:37 Color wheel filter change from 0 to 0 14:36:37 FLIGetFilterPos err=0 currentPosition=0 14:36:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:37 Filter is already there-color wheel unchanged 14:36:37 Received message from Master: op=Shutter serial=280126 14:36:37 Shutter LASER close 14:36:37 Received message from Camera: op=State serial=280128 14:36:37 GetSingleValue result=40 Value=cccccccc 14:36:37 SkyScan query 14:36:38 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:36:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:38 Parameters OK 14:36:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:38 Set A/D data flow result=40 14:36:38 Set A/D channel type result=40 14:36:38 Set A/D encoding result=40 14:36:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:38 Set channel filter=0.000000e+000 result=40 14:36:38 Config A/D Result=40 14:36:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:38 Get A/D filter: -9.255963e+061 result=40 14:36:38 Get A/D value=-858993460 result=40 14:36:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:38 Parameters OK 14:36:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:38 Set A/D data flow result=40 14:36:38 Set A/D channel type result=40 14:36:38 Set A/D encoding result=40 14:36:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:38 Set channel filter=0.000000e+000 result=40 14:36:38 Config A/D Result=40 14:36:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:38 Get A/D filter: -9.255963e+061 result=40 14:36:38 Get A/D value=-858993460 result=40 14:36:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:38 Aux= 14:36:38 Message to Camera, serial 280128 queued 14:37:15 Received message from Master: op=PointingHead serial=280141 14:37:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:37:15 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:37:15 Point started: ret=0 14:37:15 point_skyscan result=0 14:37:16 Check angles 14:37:16 SkyScan query 14:37:16 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:16 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:37:16 Message to Master queued w/err=0: serial=280141 error=0 14:37:21 Received message from Master: op=Filter serial=280142 14:37:21 Color wheel filter change from 0 to 0 14:37:21 FLIGetFilterPos err=0 currentPosition=0 14:37:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:21 Filter is already there-color wheel unchanged 14:37:22 Received message from Master: op=Shutter serial=280143 14:37:22 Shutter LASER close 14:37:22 Received message from Camera: op=State serial=280145 14:37:22 GetSingleValue result=40 Value=cccccccc 14:37:22 SkyScan query 14:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:22 Parameters OK 14:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:22 Set A/D data flow result=40 14:37:22 Set A/D channel type result=40 14:37:22 Set A/D encoding result=40 14:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:22 Set channel filter=0.000000e+000 result=40 14:37:22 Config A/D Result=40 14:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:22 Get A/D filter: -9.255963e+061 result=40 14:37:22 Get A/D value=-858993460 result=40 14:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:22 Parameters OK 14:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:22 Set A/D data flow result=40 14:37:22 Set A/D channel type result=40 14:37:22 Set A/D encoding result=40 14:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:22 Set channel filter=0.000000e+000 result=40 14:37:22 Config A/D Result=40 14:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:22 Get A/D filter: -9.255963e+061 result=40 14:37:22 Get A/D value=-858993460 result=40 14:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:22 Aux= 14:37:22 Message to Camera, serial 280145 queued 14:37:59 Received message from Master: op=PointingHead serial=280158 14:37:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:37:59 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:37:59 Point started: ret=0 14:37:59 point_skyscan result=0 14:38:00 Check angles 14:38:00 SkyScan query 14:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:01 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:38:01 Message to Master queued w/err=0: serial=280158 error=0 14:38:06 Received message from Master: op=Filter serial=280159 14:38:06 Color wheel filter change from 0 to 0 14:38:06 FLIGetFilterPos err=0 currentPosition=0 14:38:06 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:06 Filter is already there-color wheel unchanged 14:38:06 Received message from Master: op=Shutter serial=280160 14:38:06 Shutter LASER close 14:38:06 Received message from Camera: op=State serial=280162 14:38:06 GetSingleValue result=40 Value=cccccccc 14:38:06 SkyScan query 14:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:38:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:07 Parameters OK 14:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:07 Set A/D data flow result=40 14:38:07 Set A/D channel type result=40 14:38:07 Set A/D encoding result=40 14:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:07 Set channel filter=0.000000e+000 result=40 14:38:07 Config A/D Result=40 14:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:07 Get A/D filter: -9.255963e+061 result=40 14:38:07 Get A/D value=-858993460 result=40 14:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:07 Parameters OK 14:38:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:07 Set A/D data flow result=40 14:38:07 Set A/D channel type result=40 14:38:07 Set A/D encoding result=40 14:38:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:07 Set channel filter=0.000000e+000 result=40 14:38:07 Config A/D Result=40 14:38:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:07 Get A/D filter: -9.255963e+061 result=40 14:38:07 Get A/D value=-858993460 result=40 14:38:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:07 Aux= 14:38:07 Message to Camera, serial 280162 queued 14:38:43 Received message from Master: op=PointingHead serial=280175 14:38:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:38:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:38:44 Point started: ret=0 14:38:44 point_skyscan result=0 14:38:44 Check angles 14:38:44 SkyScan query 14:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.145<-13543 Statuses=0008 0009 14:38:45 Msec=0 True Az=112.995 Ze=-23.145 Az status=0008 Ze status=0009 14:38:45 Check angles 14:38:45 SkyScan query 14:38:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.52<-14968 Statuses=0008 0009 14:38:46 Msec=750 True Az=112.995 Ze=-44.52 Az status=0008 Ze status=0009 14:38:46 Check angles 14:38:46 SkyScan query 14:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.91<-16394 Statuses=0008 0009 14:38:47 Msec=1500 True Az=112.995 Ze=-65.91 Az status=0008 Ze status=0009 14:38:47 Check angles 14:38:47 SkyScan query 14:38:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-87.33<-17822 Statuses=0008 0009 14:38:47 Msec=2250 True Az=112.995 Ze=-87.33 Az status=0008 Ze status=0009 14:38:48 Check angles 14:38:48 SkyScan query 14:38:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-108.285<-19219 Statuses=0008 0009 14:38:48 Msec=3000 True Az=112.995 Ze=-108.285 Az status=0008 Ze status=0009 14:38:48 Check angles 14:38:48 SkyScan query 14:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-129.225<-20615 Statuses=0008 0009 14:38:49 Msec=3750 True Az=112.995 Ze=-129.225 Az status=0008 Ze status=0009 14:38:49 Check angles 14:38:49 SkyScan query 14:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-150.18<-22012 Statuses=0008 0009 14:38:50 Msec=4500 True Az=112.995 Ze=-150.18 Az status=0008 Ze status=0009 14:38:50 Check angles 14:38:50 SkyScan query 14:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-171<-23400 Statuses=0008 0009 14:38:50 Msec=5250 True Az=112.995 Ze=-171 Az status=0008 Ze status=0009 14:38:51 Check angles 14:38:51 SkyScan query 14:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:38:51 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:38:51 Message to Master queued w/err=0: serial=280175 error=0 14:38:56 Received message from Master: op=Filter serial=280176 14:38:56 Color wheel filter change from 0 to 0 14:38:56 FLIGetFilterPos err=0 currentPosition=0 14:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:56 Filter is already there-color wheel unchanged 14:38:56 Received message from Master: op=Shutter serial=280177 14:38:56 Shutter LASER open 14:38:56 Received message from Camera: op=State serial=280179 14:38:56 GetSingleValue result=40 Value=cccccccc 14:38:56 SkyScan query 14:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:57 Parameters OK 14:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:57 Set A/D data flow result=40 14:38:57 Set A/D channel type result=40 14:38:57 Set A/D encoding result=40 14:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:57 Set channel filter=0.000000e+000 result=40 14:38:57 Config A/D Result=40 14:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:57 Get A/D filter: -9.255963e+061 result=40 14:38:57 Get A/D value=-858993460 result=40 14:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:57 Parameters OK 14:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:57 Set A/D data flow result=40 14:38:57 Set A/D channel type result=40 14:38:57 Set A/D encoding result=40 14:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:57 Set channel filter=0.000000e+000 result=40 14:38:57 Config A/D Result=40 14:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:57 Get A/D filter: -9.255963e+061 result=40 14:38:57 Get A/D value=-858993460 result=40 14:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:57 Aux= 14:38:57 Message to Camera, serial 280179 queued 14:39:05 Received message from Master: op=Shutter serial=280188 14:39:05 Shutter LASER close 14:39:05 Received message from Master: op=PointingHead serial=280192 14:39:05 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:05 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:05 Point started: ret=0 14:39:05 point_skyscan result=0 14:39:06 Check angles 14:39:06 SkyScan query 14:39:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-142.95<-21530 Statuses=0008 0009 14:39:07 Msec=0 True Az=112.995 Ze=-142.95 Az status=0008 Ze status=0009 14:39:07 Check angles 14:39:07 SkyScan query 14:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-121.965<-20131 Statuses=0008 0009 14:39:08 Msec=750 True Az=112.995 Ze=-121.965 Az status=0008 Ze status=0009 14:39:08 Check angles 14:39:08 SkyScan query 14:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-100.575<-18705 Statuses=0008 0009 14:39:08 Msec=1500 True Az=112.995 Ze=-100.575 Az status=0008 Ze status=0009 14:39:08 Check angles 14:39:08 SkyScan query 14:39:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-79.605<-17307 Statuses=0008 0009 14:39:09 Msec=2250 True Az=112.995 Ze=-79.605 Az status=0008 Ze status=0009 14:39:09 Check angles 14:39:09 SkyScan query 14:39:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-58.65<-15910 Statuses=0008 0009 14:39:10 Msec=3000 True Az=112.995 Ze=-58.65 Az status=0008 Ze status=0009 14:39:10 Check angles 14:39:10 SkyScan query 14:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-37.695<-14513 Statuses=0008 0009 14:39:11 Msec=3750 True Az=112.995 Ze=-37.695 Az status=0008 Ze status=0009 14:39:11 Check angles 14:39:11 SkyScan query 14:39:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-16.755<-13117 Statuses=0008 0009 14:39:11 Msec=4500 True Az=112.995 Ze=-16.755 Az status=0008 Ze status=0009 14:39:11 Check angles 14:39:11 SkyScan query 14:39:12 SkyScan query done: ret=0 az=112.995<-7533 ze=4.185<-11721 Statuses=0008 0009 14:39:12 Msec=5250 True Az=112.995 Ze=4.185 Az status=0008 Ze status=0009 14:39:12 Check angles 14:39:12 SkyScan query 14:39:13 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:39:13 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:39:13 Message to Master queued w/err=0: serial=280192 error=0 14:39:18 Received message from Master: op=Filter serial=280193 14:39:18 Color wheel filter change from 0 to 0 14:39:18 FLIGetFilterPos err=0 currentPosition=0 14:39:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:18 Filter is already there-color wheel unchanged 14:39:18 Received message from Master: op=Shutter serial=280194 14:39:18 Shutter LASER close 14:39:18 Received message from Camera: op=State serial=280196 14:39:18 GetSingleValue result=40 Value=cccccccc 14:39:18 SkyScan query 14:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:19 Parameters OK 14:39:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:19 Set A/D data flow result=40 14:39:19 Set A/D channel type result=40 14:39:19 Set A/D encoding result=40 14:39:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:19 Set channel filter=0.000000e+000 result=40 14:39:19 Config A/D Result=40 14:39:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:19 Get A/D filter: -9.255963e+061 result=40 14:39:19 Get A/D value=-858993460 result=40 14:39:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:19 Parameters OK 14:39:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:19 Set A/D data flow result=40 14:39:19 Set A/D channel type result=40 14:39:19 Set A/D encoding result=40 14:39:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:19 Set channel filter=0.000000e+000 result=40 14:39:19 Config A/D Result=40 14:39:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:19 Get A/D filter: -9.255963e+061 result=40 14:39:19 Get A/D value=-858993460 result=40 14:39:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:19 Aux= 14:39:19 Message to Camera, serial 280196 queued 14:39:56 Received message from Master: op=PointingHead serial=280209 14:39:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:39:56 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:39:56 Point started: ret=0 14:39:56 point_skyscan result=0 14:39:57 Check angles 14:39:57 SkyScan query 14:39:57 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:39:57 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:39:57 Message to Master queued w/err=0: serial=280209 error=0 14:40:02 Received message from Master: op=Filter serial=280210 14:40:02 Color wheel filter change from 0 to 0 14:40:02 FLIGetFilterPos err=0 currentPosition=0 14:40:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:02 Filter is already there-color wheel unchanged 14:40:02 Received message from Master: op=Shutter serial=280211 14:40:02 Shutter LASER close 14:40:02 Received message from Camera: op=State serial=280213 14:40:02 GetSingleValue result=40 Value=cccccccc 14:40:02 SkyScan query 14:40:03 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:40:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:03 Parameters OK 14:40:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:03 Set A/D data flow result=40 14:40:03 Set A/D channel type result=40 14:40:03 Set A/D encoding result=40 14:40:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:03 Set channel filter=0.000000e+000 result=40 14:40:03 Config A/D Result=40 14:40:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:03 Get A/D filter: -9.255963e+061 result=40 14:40:03 Get A/D value=-858993460 result=40 14:40:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:03 Parameters OK 14:40:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:03 Set A/D data flow result=40 14:40:03 Set A/D channel type result=40 14:40:03 Set A/D encoding result=40 14:40:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:03 Set channel filter=0.000000e+000 result=40 14:40:03 Config A/D Result=40 14:40:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:03 Get A/D filter: -9.255963e+061 result=40 14:40:03 Get A/D value=-858993460 result=40 14:40:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:03 Aux= 14:40:03 Message to Camera, serial 280213 queued 14:40:40 Received message from Master: op=PointingHead serial=280226 14:40:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000) zen=0.000000e+000 (6.500000e+000) 14:40:40 SkyScan point: az=-4->11733 ze=6.5->12433 Resp=0 14:40:40 Point started: ret=0 14:40:40 point_skyscan result=0 14:40:41 Check angles 14:40:41 SkyScan query 14:40:41 SkyScan query done: ret=0 az=136.155<-9077 ze=-6.51<-12434 Statuses=0009 0008 14:40:41 Msec=0 True Az=136.155 Ze=-6.51 Az status=0009 Ze status=0008 14:40:42 Check angles 14:40:42 SkyScan query 14:40:42 SkyScan query done: ret=0 az=153.555<-10237 ze=-6.495<-12433 Statuses=0009 0008 14:40:42 Msec=750 True Az=153.555 Ze=-6.495 Az status=0009 Ze status=0008 14:40:42 Check angles 14:40:42 SkyScan query 14:40:43 SkyScan query done: ret=0 az=171.09<-11406 ze=-6.495<-12433 Statuses=0009 0008 14:40:43 Msec=1500 True Az=171.09 Ze=-6.495 Az status=0009 Ze status=0008 14:40:43 Check angles 14:40:43 SkyScan query 14:40:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-6.495<-12433 Statuses=0008 0008 14:40:44 Msec=2250 True Az=176.01 Ze=-6.495 Az status=0008 Ze status=0008 14:40:44 Message to Master queued w/err=0: serial=280226 error=0 14:40:49 Received message from Master: op=Filter serial=280227 14:40:49 Color wheel filter change from 0 to 0 14:40:49 FLIGetFilterPos err=0 currentPosition=0 14:40:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:49 Filter is already there-color wheel unchanged 14:40:49 Received message from Master: op=Shutter serial=280228 14:40:49 Shutter LASER close 14:40:49 Received message from Camera: op=State serial=280230 14:40:49 GetSingleValue result=40 Value=cccccccc 14:40:49 SkyScan query 14:40:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-6.495<-12433 Statuses=0008 0008 14:40:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:50 Parameters OK 14:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:50 Set A/D data flow result=40 14:40:50 Set A/D channel type result=40 14:40:50 Set A/D encoding result=40 14:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:50 Set channel filter=0.000000e+000 result=40 14:40:50 Config A/D Result=40 14:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:50 Get A/D filter: -9.255963e+061 result=40 14:40:50 Get A/D value=-858993460 result=40 14:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:50 Parameters OK 14:40:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:50 Set A/D data flow result=40 14:40:50 Set A/D channel type result=40 14:40:50 Set A/D encoding result=40 14:40:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:50 Set channel filter=0.000000e+000 result=40 14:40:50 Config A/D Result=40 14:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:50 Get A/D filter: -9.255963e+061 result=40 14:40:50 Get A/D value=-858993460 result=40 14:40:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:50 Aux= 14:40:50 Message to Camera, serial 280230 queued 14:41:26 Received message from Master: op=PointingHead serial=280243 14:41:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:41:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:41:27 Point started: ret=0 14:41:27 point_skyscan result=0 14:41:28 Check angles 14:41:28 SkyScan query 14:41:28 SkyScan query done: ret=0 az=152.955<-10197 ze=6.51<-11566 Statuses=0009 0008 14:41:28 Msec=0 True Az=152.955 Ze=6.51 Az status=0009 Ze status=0008 14:41:28 Check angles 14:41:28 SkyScan query 14:41:29 SkyScan query done: ret=0 az=135.54<-9036 ze=6.495<-11567 Statuses=0009 0008 14:41:29 Msec=750 True Az=135.54 Ze=6.495 Az status=0009 Ze status=0008 14:41:29 Check angles 14:41:29 SkyScan query 14:41:30 SkyScan query done: ret=0 az=118.14<-7876 ze=6.495<-11567 Statuses=0009 0008 14:41:30 Msec=1500 True Az=118.14 Ze=6.495 Az status=0009 Ze status=0008 14:41:30 Check angles 14:41:30 SkyScan query 14:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:30 Msec=2250 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:41:30 Message to Master queued w/err=0: serial=280243 error=0 14:41:35 Received message from Master: op=Filter serial=280244 14:41:35 Color wheel filter change from 0 to 0 14:41:35 FLIGetFilterPos err=0 currentPosition=0 14:41:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:35 Filter is already there-color wheel unchanged 14:41:36 Received message from Master: op=Shutter serial=280245 14:41:36 Shutter LASER close 14:41:36 Received message from Camera: op=State serial=280247 14:41:36 GetSingleValue result=40 Value=cccccccc 14:41:36 SkyScan query 14:41:36 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:41:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:36 Parameters OK 14:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:36 Set A/D data flow result=40 14:41:36 Set A/D channel type result=40 14:41:36 Set A/D encoding result=40 14:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:36 Set channel filter=0.000000e+000 result=40 14:41:36 Config A/D Result=40 14:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:36 Get A/D filter: -9.255963e+061 result=40 14:41:36 Get A/D value=-858993460 result=40 14:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:36 Parameters OK 14:41:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:36 Set A/D data flow result=40 14:41:36 Set A/D channel type result=40 14:41:36 Set A/D encoding result=40 14:41:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:36 Set channel filter=0.000000e+000 result=40 14:41:36 Config A/D Result=40 14:41:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:36 Get A/D filter: -9.255963e+061 result=40 14:41:36 Get A/D value=-858993460 result=40 14:41:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:36 Aux= 14:41:36 Message to Camera, serial 280247 queued 14:42:13 Received message from Master: op=PointingHead serial=280260 14:42:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:42:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:42:13 Point started: ret=0 14:42:13 point_skyscan result=0 14:42:14 Check angles 14:42:14 SkyScan query 14:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.025<-13535 Statuses=0008 0009 14:42:15 Msec=0 True Az=112.995 Ze=-23.025 Az status=0008 Ze status=0009 14:42:15 Check angles 14:42:15 SkyScan query 14:42:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.43<-14962 Statuses=0008 0009 14:42:15 Msec=750 True Az=112.995 Ze=-44.43 Az status=0008 Ze status=0009 14:42:16 Check angles 14:42:16 SkyScan query 14:42:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.76<-16384 Statuses=0008 0009 14:42:16 Msec=1500 True Az=112.995 Ze=-65.76 Az status=0008 Ze status=0009 14:42:16 Check angles 14:42:16 SkyScan query 14:42:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.715<-17781 Statuses=0008 0009 14:42:17 Msec=2250 True Az=112.995 Ze=-86.715 Az status=0008 Ze status=0009 14:42:17 Check angles 14:42:17 SkyScan query 14:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-107.73<-19182 Statuses=0008 0009 14:42:18 Msec=3000 True Az=112.995 Ze=-107.73 Az status=0008 Ze status=0009 14:42:18 Check angles 14:42:18 SkyScan query 14:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-128.64<-20576 Statuses=0008 0009 14:42:18 Msec=3750 True Az=112.995 Ze=-128.64 Az status=0008 Ze status=0009 14:42:19 Check angles 14:42:19 SkyScan query 14:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-149.64<-21976 Statuses=0008 0009 14:42:19 Msec=4500 True Az=112.995 Ze=-149.64 Az status=0008 Ze status=0009 14:42:19 Check angles 14:42:19 SkyScan query 14:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.895<-23393 Statuses=0008 0009 14:42:20 Msec=5250 True Az=112.995 Ze=-170.895 Az status=0008 Ze status=0009 14:42:20 Check angles 14:42:20 SkyScan query 14:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:42:21 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:42:21 Message to Master queued w/err=0: serial=280260 error=0 14:42:26 Received message from Master: op=Filter serial=280261 14:42:26 Color wheel filter change from 0 to 0 14:42:26 FLIGetFilterPos err=0 currentPosition=0 14:42:26 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:26 Filter is already there-color wheel unchanged 14:42:26 Received message from Master: op=Shutter serial=280262 14:42:26 Shutter LASER open 14:42:26 Received message from Camera: op=State serial=280264 14:42:26 GetSingleValue result=40 Value=cccccccc 14:42:26 SkyScan query 14:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:42:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:27 Parameters OK 14:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:27 Set A/D data flow result=40 14:42:27 Set A/D channel type result=40 14:42:27 Set A/D encoding result=40 14:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:27 Set channel filter=0.000000e+000 result=40 14:42:27 Config A/D Result=40 14:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:27 Get A/D filter: -9.255963e+061 result=40 14:42:27 Get A/D value=-858993460 result=40 14:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:27 Parameters OK 14:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:27 Set A/D data flow result=40 14:42:27 Set A/D channel type result=40 14:42:27 Set A/D encoding result=40 14:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:27 Set channel filter=0.000000e+000 result=40 14:42:27 Config A/D Result=40 14:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:27 Get A/D filter: -9.255963e+061 result=40 14:42:27 Get A/D value=-858993460 result=40 14:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:27 Aux= 14:42:27 Message to Camera, serial 280264 queued 14:42:35 Received message from Master: op=Shutter serial=280274 14:42:35 Shutter LASER close 14:42:36 Received message from Master: op=PointingHead serial=280278 14:42:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:42:36 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:42:36 Point started: ret=0 14:42:36 point_skyscan result=0 14:42:37 Check angles 14:42:37 SkyScan query 14:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.445<-21563 Statuses=0008 0009 14:42:37 Msec=0 True Az=112.995 Ze=-143.445 Az status=0008 Ze status=0009 14:42:37 Check angles 14:42:37 SkyScan query 14:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.52<-20168 Statuses=0008 0009 14:42:38 Msec=750 True Az=112.995 Ze=-122.52 Az status=0008 Ze status=0009 14:42:38 Check angles 14:42:38 SkyScan query 14:42:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.55<-18770 Statuses=0008 0009 14:42:39 Msec=1500 True Az=112.995 Ze=-101.55 Az status=0008 Ze status=0009 14:42:39 Check angles 14:42:39 SkyScan query 14:42:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-80.505<-17367 Statuses=0008 0009 14:42:39 Msec=2250 True Az=112.995 Ze=-80.505 Az status=0008 Ze status=0009 14:42:40 Check angles 14:42:40 SkyScan query 14:42:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-59.655<-15977 Statuses=0008 0009 14:42:40 Msec=3000 True Az=112.995 Ze=-59.655 Az status=0008 Ze status=0009 14:42:40 Check angles 14:42:40 SkyScan query 14:42:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-38.685<-14579 Statuses=0008 0009 14:42:41 Msec=3750 True Az=112.995 Ze=-38.685 Az status=0008 Ze status=0009 14:42:41 Check angles 14:42:41 SkyScan query 14:42:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-17.73<-13182 Statuses=0008 0009 14:42:42 Msec=4500 True Az=112.995 Ze=-17.73 Az status=0008 Ze status=0009 14:42:42 Check angles 14:42:42 SkyScan query 14:42:42 SkyScan query done: ret=0 az=112.98<-7532 ze=3.24<-11784 Statuses=0008 0009 14:42:42 Msec=5250 True Az=112.98 Ze=3.24 Az status=0008 Ze status=0009 14:42:43 Check angles 14:42:43 SkyScan query 14:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=6.51<-11566 Statuses=0008 0008 14:42:43 Msec=6000 True Az=112.995 Ze=6.51 Az status=0008 Ze status=0008 14:42:43 Message to Master queued w/err=0: serial=280278 error=0 14:42:48 Received message from Master: op=Filter serial=280279 14:42:48 Color wheel filter change from 0 to 0 14:42:48 FLIGetFilterPos err=0 currentPosition=0 14:42:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:48 Filter is already there-color wheel unchanged 14:42:48 Received message from Master: op=Shutter serial=280280 14:42:48 Shutter LASER close 14:42:49 Received message from Camera: op=State serial=280282 14:42:49 GetSingleValue result=40 Value=cccccccc 14:42:49 SkyScan query 14:42:49 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:42:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:49 Parameters OK 14:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:49 Set A/D data flow result=40 14:42:49 Set A/D channel type result=40 14:42:49 Set A/D encoding result=40 14:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:49 Set channel filter=0.000000e+000 result=40 14:42:49 Config A/D Result=40 14:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:49 Get A/D filter: -9.255963e+061 result=40 14:42:49 Get A/D value=-858993460 result=40 14:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:49 Parameters OK 14:42:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:49 Set A/D data flow result=40 14:42:49 Set A/D channel type result=40 14:42:49 Set A/D encoding result=40 14:42:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:49 Set channel filter=0.000000e+000 result=40 14:42:49 Config A/D Result=40 14:42:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:49 Get A/D filter: -9.255963e+061 result=40 14:42:49 Get A/D value=-858993460 result=40 14:42:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:49 Aux= 14:42:49 Message to Camera, serial 280282 queued 14:43:26 Received message from Master: op=PointingHead serial=280295 14:43:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:43:26 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:43:26 Point started: ret=0 14:43:26 point_skyscan result=0 14:43:27 Check angles 14:43:27 SkyScan query 14:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:28 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:43:28 Message to Master queued w/err=0: serial=280295 error=0 14:43:33 Received message from Master: op=Filter serial=280296 14:43:33 Color wheel filter change from 0 to 0 14:43:33 FLIGetFilterPos err=0 currentPosition=0 14:43:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:33 Filter is already there-color wheel unchanged 14:43:33 Received message from Master: op=Shutter serial=280297 14:43:33 Shutter LASER close 14:43:33 Received message from Camera: op=State serial=280299 14:43:33 GetSingleValue result=40 Value=cccccccc 14:43:33 SkyScan query 14:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:43:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:33 Parameters OK 14:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:33 Set A/D data flow result=40 14:43:33 Set A/D channel type result=40 14:43:33 Set A/D encoding result=40 14:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:33 Set channel filter=0.000000e+000 result=40 14:43:33 Config A/D Result=40 14:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:33 Get A/D filter: -9.255963e+061 result=40 14:43:33 Get A/D value=-858993460 result=40 14:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:33 Parameters OK 14:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:33 Set A/D data flow result=40 14:43:33 Set A/D channel type result=40 14:43:33 Set A/D encoding result=40 14:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:33 Set channel filter=0.000000e+000 result=40 14:43:33 Config A/D Result=40 14:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:33 Get A/D filter: -9.255963e+061 result=40 14:43:33 Get A/D value=-858993460 result=40 14:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:33 Aux= 14:43:33 Message to Camera, serial 280299 queued [UTC 2019-3-14 14:43:48] 14:44:10 Received message from Master: op=PointingHead serial=280312 14:44:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=0.000000e+000 (6.500000e+000) 14:44:10 SkyScan point: az=113->7533 ze=6.5->11567 Resp=0 14:44:11 Point started: ret=0 14:44:11 point_skyscan result=0 14:44:11 Check angles 14:44:11 SkyScan query 14:44:12 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:12 Msec=0 True Az=112.995 Ze=6.495 Az status=0008 Ze status=0008 14:44:12 Message to Master queued w/err=0: serial=280312 error=0 14:44:17 Received message from Master: op=Filter serial=280313 14:44:17 Color wheel filter change from 0 to 0 14:44:17 FLIGetFilterPos err=0 currentPosition=0 14:44:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:17 Filter is already there-color wheel unchanged 14:44:17 Received message from Master: op=Shutter serial=280314 14:44:17 Shutter LASER close 14:44:17 Received message from Camera: op=State serial=280316 14:44:17 GetSingleValue result=40 Value=cccccccc 14:44:17 SkyScan query 14:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=6.495<-11567 Statuses=0008 0008 14:44:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:18 Parameters OK 14:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:18 Set A/D data flow result=40 14:44:18 Set A/D channel type result=40 14:44:18 Set A/D encoding result=40 14:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:18 Set channel filter=0.000000e+000 result=40 14:44:18 Config A/D Result=40 14:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:18 Get A/D filter: -9.255963e+061 result=40 14:44:18 Get A/D value=-858993460 result=40 14:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:18 Parameters OK 14:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:18 Set A/D data flow result=40 14:44:18 Set A/D channel type result=40 14:44:18 Set A/D encoding result=40 14:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:18 Set channel filter=0.000000e+000 result=40 14:44:18 Config A/D Result=40 14:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:18 Get A/D filter: -9.255963e+061 result=40 14:44:18 Get A/D value=-858993460 result=40 14:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=6.495000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:18 Aux= 14:44:18 Message to Camera, serial 280316 queued 14:44:55 Received message from Master: op=PointingHead serial=280329 14:44:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:44:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:44:55 Point started: ret=0 14:44:55 point_skyscan result=0 14:44:56 Check angles 14:44:56 SkyScan query 14:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-23.175<-13545 Statuses=0008 0009 14:44:57 Msec=0 True Az=112.995 Ze=-23.175 Az status=0008 Ze status=0009 14:44:57 Check angles 14:44:57 SkyScan query 14:44:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-44.16<-14944 Statuses=0008 0009 14:44:57 Msec=750 True Az=112.995 Ze=-44.16 Az status=0008 Ze status=0009 14:44:57 Check angles 14:44:57 SkyScan query 14:44:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-65.07<-16338 Statuses=0008 0009 14:44:58 Msec=1500 True Az=112.995 Ze=-65.07 Az status=0008 Ze status=0009 14:44:58 Check angles 14:44:58 SkyScan query 14:44:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-86.025<-17735 Statuses=0008 0009 14:44:59 Msec=2250 True Az=112.995 Ze=-86.025 Az status=0008 Ze status=0009 14:44:59 Check angles 14:44:59 SkyScan query 14:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-106.95<-19130 Statuses=0008 0009 14:45:00 Msec=3000 True Az=112.995 Ze=-106.95 Az status=0008 Ze status=0009 14:45:00 Check angles 14:45:00 SkyScan query 14:45:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-127.92<-20528 Statuses=0008 0009 14:45:00 Msec=3750 True Az=112.995 Ze=-127.92 Az status=0008 Ze status=0009 14:45:00 Check angles 14:45:00 SkyScan query 14:45:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-148.86<-21924 Statuses=0008 0009 14:45:01 Msec=4500 True Az=112.995 Ze=-148.86 Az status=0008 Ze status=0009 14:45:01 Check angles 14:45:01 SkyScan query 14:45:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-170.28<-23352 Statuses=0008 0009 14:45:02 Msec=5250 True Az=112.995 Ze=-170.28 Az status=0008 Ze status=0009 14:45:02 Check angles 14:45:02 SkyScan query 14:45:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:45:03 Msec=6000 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:45:03 Message to Master queued w/err=0: serial=280329 error=0 14:45:08 Received message from Master: op=Filter serial=280330 14:45:08 Color wheel filter change from 0 to 2 14:45:08 FLIGetFilterPos err=0 currentPosition=0 14:45:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:11 FLISetFilterPos err=0 rqPosition=2 14:45:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:11 Check after 0.00 sec for filter wheel DIn/CWh=0 14:45:11 FLIGetFilterPos err=0 currentPosition=2 14:45:11 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:11 Received message from Master: op=Shutter serial=280331 14:45:11 Shutter LASER close 14:45:11 Received message from Camera: op=State serial=280333 14:45:11 GetSingleValue result=40 Value=cccccccc 14:45:11 SkyScan query 14:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:45:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:12 Parameters OK 14:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:12 Set A/D data flow result=40 14:45:12 Set A/D channel type result=40 14:45:12 Set A/D encoding result=40 14:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:12 Set channel filter=0.000000e+000 result=40 14:45:12 Config A/D Result=40 14:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:12 Get A/D filter: -9.255963e+061 result=40 14:45:12 Get A/D value=-858993460 result=40 14:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:12 Parameters OK 14:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:12 Set A/D data flow result=40 14:45:12 Set A/D channel type result=40 14:45:12 Set A/D encoding result=40 14:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:12 Set channel filter=0.000000e+000 result=40 14:45:12 Config A/D Result=40 14:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:12 Get A/D filter: -9.255963e+061 result=40 14:45:12 Get A/D value=-858993460 result=40 14:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:12 Aux= 14:45:12 Message to Camera, serial 280333 queued 14:45:18 Received message from Master: op=PointingHead serial=280344 14:45:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:45:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:45:18 Point started: ret=0 14:45:18 point_skyscan result=0 14:45:19 Check angles 14:45:19 SkyScan query 14:45:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:45:19 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 14:45:19 Message to Master queued w/err=0: serial=280344 error=0 14:45:24 Received message from Master: op=Filter serial=280345 14:45:24 Color wheel filter change from 2 to 2 14:45:24 FLIGetFilterPos err=0 currentPosition=2 14:45:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:24 Filter is already there-color wheel unchanged 14:45:24 Received message from Master: op=Shutter serial=280346 14:45:24 Shutter LASER close 14:45:25 Received message from Camera: op=State serial=280348 14:45:25 GetSingleValue result=40 Value=cccccccc 14:45:25 SkyScan query 14:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:45:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:25 Parameters OK 14:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:25 Set A/D data flow result=40 14:45:25 Set A/D channel type result=40 14:45:25 Set A/D encoding result=40 14:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:25 Set channel filter=0.000000e+000 result=40 14:45:25 Config A/D Result=40 14:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:25 Get A/D filter: -9.255963e+061 result=40 14:45:25 Get A/D value=-858993460 result=40 14:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:25 Parameters OK 14:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:25 Set A/D data flow result=40 14:45:25 Set A/D channel type result=40 14:45:25 Set A/D encoding result=40 14:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:25 Set channel filter=0.000000e+000 result=40 14:45:25 Config A/D Result=40 14:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:25 Get A/D filter: -9.255963e+061 result=40 14:45:25 Get A/D value=-858993460 result=40 14:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:25 Aux= 14:45:25 Message to Camera, serial 280348 queued 14:46:01 Received message from Master: op=PointingHead serial=280360 14:46:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:46:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:46:01 Point started: ret=0 14:46:01 point_skyscan result=0 14:46:02 Check angles 14:46:02 SkyScan query 14:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:46:03 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 14:46:03 Message to Master queued w/err=0: serial=280360 error=0 14:46:08 Received message from Master: op=Filter serial=280361 14:46:08 Color wheel filter change from 2 to 2 14:46:08 FLIGetFilterPos err=0 currentPosition=2 14:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:08 Filter is already there-color wheel unchanged 14:46:08 Received message from Master: op=Shutter serial=280362 14:46:08 Shutter LASER close 14:46:08 Received message from Camera: op=State serial=280364 14:46:08 GetSingleValue result=40 Value=cccccccc 14:46:08 SkyScan query 14:46:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:09 Parameters OK 14:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:09 Set A/D data flow result=40 14:46:09 Set A/D channel type result=40 14:46:09 Set A/D encoding result=40 14:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:09 Set channel filter=0.000000e+000 result=40 14:46:09 Config A/D Result=40 14:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:09 Get A/D filter: -9.255963e+061 result=40 14:46:09 Get A/D value=-858993460 result=40 14:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:09 Parameters OK 14:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:09 Set A/D data flow result=40 14:46:09 Set A/D channel type result=40 14:46:09 Set A/D encoding result=40 14:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:09 Set channel filter=0.000000e+000 result=40 14:46:09 Config A/D Result=40 14:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:09 Get A/D filter: -9.255963e+061 result=40 14:46:09 Get A/D value=-858993460 result=40 14:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:09 Aux= 14:46:09 Message to Camera, serial 280364 queued 14:46:17 Received message from Master: op=Log close serial=280378 14:46:17 Log file close 14:46:17 * END OF LOG *