[UTC 2019-3-8  15:08:07]
15:08:07 Received message from Master: op=Log open serial=180384
15:08:07 Log file open: Observatory  C:\PKZPrograms\Logs\20190307 \ PKZ20190308150807_Observatory.txt
15:08:07 Previous log file: 
15:08:11 Received message from Master: op=Log directory change serial=180386
15:08:11 Log file directory changed from C:\PKZPrograms\Logs\20190307 to C:\PKZPrograms\Logs\20190308
15:08:11 Log file name is PKZ20190308150811_Observatory.txt
15:18:11 No messages received for 10 min. 4238 sent since last one of these.
15:18:11 MsgArea H: nextMessageSerial=180394  startMsgs=68  nextFree=17748  maxMsg=65468
15:18:11 MsgArea Q: Master=-1:-1  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
15:18:11 MsgArea S: 
[UTC 2019-3-8  15:23:48]
15:28:11 No messages received for 10 min. 0 sent since last one of these.
15:28:11 MsgArea H: nextMessageSerial=180394  startMsgs=68  nextFree=17748  maxMsg=65468
15:28:11 MsgArea Q: Master=-1:-1  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
15:28:11 MsgArea S: 
15:33:36 Received message from Master: op=Identify serial=180394
15:43:36 No messages received for 10 min. 1 sent since last one of these.
15:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
15:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
15:43:36 MsgArea S: 
[UTC 2019-3-8  15:43:48]
15:53:36 No messages received for 10 min. 0 sent since last one of these.
15:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
15:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
15:53:36 MsgArea S: 
16:03:36 No messages received for 10 min. 0 sent since last one of these.
16:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
16:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
16:03:36 MsgArea S: 
[UTC 2019-3-8  16:03:48]
16:13:36 No messages received for 10 min. 0 sent since last one of these.
16:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
16:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
16:13:36 MsgArea S: 
16:23:36 No messages received for 10 min. 0 sent since last one of these.
16:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
16:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
16:23:36 MsgArea S: 
[UTC 2019-3-8  16:23:48]
16:33:36 No messages received for 10 min. 0 sent since last one of these.
16:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
16:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
16:33:36 MsgArea S: 
16:43:36 No messages received for 10 min. 0 sent since last one of these.
16:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
16:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
16:43:36 MsgArea S: 
[UTC 2019-3-8  16:43:48]
16:53:36 No messages received for 10 min. 0 sent since last one of these.
16:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
16:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
16:53:36 MsgArea S: 
17:03:36 No messages received for 10 min. 0 sent since last one of these.
17:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
17:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
17:03:36 MsgArea S: 
[UTC 2019-3-8  17:03:48]
17:13:36 No messages received for 10 min. 0 sent since last one of these.
17:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
17:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
17:13:36 MsgArea S: 
17:23:36 No messages received for 10 min. 0 sent since last one of these.
17:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
17:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
17:23:36 MsgArea S: 
[UTC 2019-3-8  17:23:48]
17:33:36 No messages received for 10 min. 0 sent since last one of these.
17:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
17:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
17:33:36 MsgArea S: 
17:43:36 No messages received for 10 min. 0 sent since last one of these.
17:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
17:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
17:43:36 MsgArea S: 
[UTC 2019-3-8  17:43:48]
17:53:36 No messages received for 10 min. 0 sent since last one of these.
17:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
17:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
17:53:36 MsgArea S: 
18:03:36 No messages received for 10 min. 0 sent since last one of these.
18:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
18:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
18:03:36 MsgArea S: 
[UTC 2019-3-8  18:03:48]
18:13:36 No messages received for 10 min. 0 sent since last one of these.
18:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
18:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
18:13:36 MsgArea S: 
18:23:36 No messages received for 10 min. 0 sent since last one of these.
18:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
18:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
18:23:36 MsgArea S: 
[UTC 2019-3-8  18:23:48]
18:33:36 No messages received for 10 min. 0 sent since last one of these.
18:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
18:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
18:33:36 MsgArea S: 
18:43:36 No messages received for 10 min. 0 sent since last one of these.
18:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
18:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
18:43:36 MsgArea S: 
[UTC 2019-3-8  18:43:48]
18:53:36 No messages received for 10 min. 0 sent since last one of these.
18:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
18:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
18:53:36 MsgArea S: 
19:03:36 No messages received for 10 min. 0 sent since last one of these.
19:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
19:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
19:03:36 MsgArea S: 
[UTC 2019-3-8  19:03:48]
19:13:36 No messages received for 10 min. 0 sent since last one of these.
19:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
19:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
19:13:36 MsgArea S: 
19:23:36 No messages received for 10 min. 0 sent since last one of these.
19:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
19:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
19:23:36 MsgArea S: 
[UTC 2019-3-8  19:23:48]
19:33:36 No messages received for 10 min. 0 sent since last one of these.
19:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
19:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
19:33:36 MsgArea S: 
19:43:36 No messages received for 10 min. 0 sent since last one of these.
19:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
19:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
19:43:36 MsgArea S: 
[UTC 2019-3-8  19:43:48]
19:53:36 No messages received for 10 min. 0 sent since last one of these.
19:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
19:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
19:53:36 MsgArea S: 
20:03:36 No messages received for 10 min. 0 sent since last one of these.
20:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
20:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
20:03:36 MsgArea S: 
[UTC 2019-3-8  20:03:48]
20:13:36 No messages received for 10 min. 0 sent since last one of these.
20:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
20:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
20:13:36 MsgArea S: 
20:23:36 No messages received for 10 min. 0 sent since last one of these.
20:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
20:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
20:23:36 MsgArea S: 
[UTC 2019-3-8  20:23:48]
20:33:36 No messages received for 10 min. 0 sent since last one of these.
20:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
20:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
20:33:36 MsgArea S: 
20:43:36 No messages received for 10 min. 0 sent since last one of these.
20:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
20:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
20:43:36 MsgArea S: 
[UTC 2019-3-8  20:43:48]
20:53:36 No messages received for 10 min. 0 sent since last one of these.
20:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
20:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
20:53:36 MsgArea S: 
21:03:36 No messages received for 10 min. 0 sent since last one of these.
21:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
21:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
21:03:36 MsgArea S: 
[UTC 2019-3-8  21:03:48]
21:13:36 No messages received for 10 min. 0 sent since last one of these.
21:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
21:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
21:13:36 MsgArea S: 
21:23:36 No messages received for 10 min. 0 sent since last one of these.
21:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
21:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
21:23:36 MsgArea S: 
[UTC 2019-3-8  21:23:48]
21:33:36 No messages received for 10 min. 0 sent since last one of these.
21:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
21:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
21:33:36 MsgArea S: 
21:43:36 No messages received for 10 min. 0 sent since last one of these.
21:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
21:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
21:43:36 MsgArea S: 
[UTC 2019-3-8  21:43:48]
21:53:36 No messages received for 10 min. 0 sent since last one of these.
21:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
21:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
21:53:36 MsgArea S: 
22:03:36 No messages received for 10 min. 0 sent since last one of these.
22:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
22:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
22:03:36 MsgArea S: 
[UTC 2019-3-8  22:03:48]
22:13:36 No messages received for 10 min. 0 sent since last one of these.
22:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
22:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
22:13:36 MsgArea S: 
22:23:36 No messages received for 10 min. 0 sent since last one of these.
22:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
22:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
22:23:36 MsgArea S: 
[UTC 2019-3-8  22:23:48]
22:33:36 No messages received for 10 min. 0 sent since last one of these.
22:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
22:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
22:33:36 MsgArea S: 
22:43:36 No messages received for 10 min. 0 sent since last one of these.
22:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
22:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
22:43:36 MsgArea S: 
[UTC 2019-3-8  22:43:48]
22:53:36 No messages received for 10 min. 0 sent since last one of these.
22:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
22:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
22:53:36 MsgArea S: 
23:03:36 No messages received for 10 min. 0 sent since last one of these.
23:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
23:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
23:03:36 MsgArea S: 
[UTC 2019-3-8  23:03:48]
23:13:36 No messages received for 10 min. 0 sent since last one of these.
23:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
23:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
23:13:36 MsgArea S: 
23:23:36 No messages received for 10 min. 0 sent since last one of these.
23:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
23:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
23:23:36 MsgArea S: 
[UTC 2019-3-8  23:23:48]
23:33:36 No messages received for 10 min. 0 sent since last one of these.
23:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
23:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
23:33:36 MsgArea S: 
23:43:36 No messages received for 10 min. 0 sent since last one of these.
23:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
23:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
23:43:36 MsgArea S: 
[UTC 2019-3-8  23:43:48]
23:53:36 No messages received for 10 min. 0 sent since last one of these.
23:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
23:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
23:53:36 MsgArea S: 
00:03:36 No messages received for 10 min. 0 sent since last one of these.
00:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
00:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
00:03:36 MsgArea S: 
[UTC 2019-3-9  00:03:48]
00:13:36 No messages received for 10 min. 0 sent since last one of these.
00:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
00:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
00:13:36 MsgArea S: 
00:23:36 No messages received for 10 min. 0 sent since last one of these.
00:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
00:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
00:23:36 MsgArea S: 
[UTC 2019-3-9  00:23:48]
00:33:36 No messages received for 10 min. 0 sent since last one of these.
00:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
00:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
00:33:36 MsgArea S: 
00:43:36 No messages received for 10 min. 0 sent since last one of these.
00:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
00:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
00:43:36 MsgArea S: 
[UTC 2019-3-9  00:43:48]
00:53:36 No messages received for 10 min. 0 sent since last one of these.
00:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
00:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
00:53:36 MsgArea S: 
01:03:36 No messages received for 10 min. 0 sent since last one of these.
01:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
01:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
01:03:36 MsgArea S: 
[UTC 2019-3-9  01:03:48]
01:13:36 No messages received for 10 min. 0 sent since last one of these.
01:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
01:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
01:13:36 MsgArea S: 
01:23:36 No messages received for 10 min. 0 sent since last one of these.
01:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
01:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
01:23:36 MsgArea S: 
[UTC 2019-3-9  01:23:48]
01:33:36 No messages received for 10 min. 0 sent since last one of these.
01:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
01:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
01:33:36 MsgArea S: 
01:43:36 No messages received for 10 min. 0 sent since last one of these.
01:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
01:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
01:43:36 MsgArea S: 
[UTC 2019-3-9  01:43:48]
01:53:36 No messages received for 10 min. 0 sent since last one of these.
01:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
01:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
01:53:36 MsgArea S: 
02:03:36 No messages received for 10 min. 0 sent since last one of these.
02:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
02:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
02:03:36 MsgArea S: 
[UTC 2019-3-9  02:03:48]
02:13:36 No messages received for 10 min. 0 sent since last one of these.
02:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
02:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
02:13:36 MsgArea S: 
02:23:36 No messages received for 10 min. 0 sent since last one of these.
02:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
02:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
02:23:36 MsgArea S: 
[UTC 2019-3-9  02:23:48]
02:33:36 No messages received for 10 min. 0 sent since last one of these.
02:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
02:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
02:33:36 MsgArea S: 
02:43:36 No messages received for 10 min. 0 sent since last one of these.
02:43:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
02:43:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
02:43:36 MsgArea S: 
[UTC 2019-3-9  02:43:48]
02:53:36 No messages received for 10 min. 0 sent since last one of these.
02:53:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
02:53:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
02:53:36 MsgArea S: 
03:03:36 No messages received for 10 min. 0 sent since last one of these.
03:03:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
03:03:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
03:03:36 MsgArea S: 
[UTC 2019-3-9  03:03:48]
03:13:36 No messages received for 10 min. 0 sent since last one of these.
03:13:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
03:13:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
03:13:36 MsgArea S: 
03:23:36 No messages received for 10 min. 0 sent since last one of these.
03:23:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
03:23:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
03:23:36 MsgArea S: 
[UTC 2019-3-9  03:23:48]
03:33:36 No messages received for 10 min. 0 sent since last one of these.
03:33:36 MsgArea H: nextMessageSerial=180397  startMsgs=68  nextFree=18972  maxMsg=65468
03:33:36 MsgArea Q: Master=18360:18768  Camera=-1:-1  Observatory=-1:-1  Communicate=204:204  Analyze=-1:-1
03:33:36 MsgArea S: 
03:37:17 Received message from Master: op=PointingHead serial=180398
03:37:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:37:17 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:37:18 Point started: ret=0
03:37:18 point_skyscan result=0
03:37:18 Check angles
03:37:18 SkyScan query
03:37:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.98<-23532  Statuses=0008 0008
03:37:19 Msec=0  True Az=112.995  Ze=-172.98  Az status=0008  Ze status=0008
03:37:19 Message to Master queued w/err=0: serial=180398 error=0
03:37:24 Received message from Master: op=Filter serial=180399
03:37:24 Color wheel filter change from 2 to 2
03:37:24 FLIGetFilterPos err=0  currentPosition=2
03:37:24 FLIGetStepsRemaining err=0  RemainingSteps=0
03:37:24 Filter is already there-color wheel unchanged
03:37:24 Received message from Master: op=Shutter serial=180400
03:37:24 Shutter LASER close
03:37:26 Received message from Camera: op=State serial=180402
03:37:26 GetSingleValue result=40  Value=cccccccc
03:37:26 SkyScan query
03:37:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:37:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:37:26 Parameters OK
03:37:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:37:26 Set A/D data flow result=40
03:37:26 Set A/D channel type result=40
03:37:26 Set A/D encoding result=40
03:37:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:37:26 Set channel filter=0.000000e+000  result=40
03:37:26 Config A/D  Result=40
03:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:37:26 Get A/D filter: -9.255963e+061  result=40
03:37:26 Get A/D value=-858993460  result=40
03:37:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:37:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:37:26 Parameters OK
03:37:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:37:26 Set A/D data flow result=40
03:37:26 Set A/D channel type result=40
03:37:26 Set A/D encoding result=40
03:37:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:37:26 Set channel filter=0.000000e+000  result=40
03:37:26 Config A/D  Result=40
03:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:37:26 Get A/D filter: -9.255963e+061  result=40
03:37:26 Get A/D value=-858993460  result=40
03:37:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:37:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:37:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:37:26 Aux=
03:37:26 Message to Camera, serial 180402 queued
03:37:32 Received message from Master: op=PointingHead serial=180413
03:37:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:37:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:37:32 Point started: ret=0
03:37:32 point_skyscan result=0
03:37:33 Check angles
03:37:33 SkyScan query
03:37:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:37:34 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
03:37:34 Message to Master queued w/err=0: serial=180413 error=0
03:37:39 Received message from Master: op=Filter serial=180414
03:37:39 Color wheel filter change from 2 to 2
03:37:39 FLIGetFilterPos err=0  currentPosition=2
03:37:39 FLIGetStepsRemaining err=0  RemainingSteps=0
03:37:39 Filter is already there-color wheel unchanged
03:37:39 Received message from Master: op=Shutter serial=180415
03:37:39 Shutter LASER close
03:37:39 Received message from Camera: op=State serial=180417
03:37:39 GetSingleValue result=40  Value=cccccccc
03:37:39 SkyScan query
03:37:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:37:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:37:40 Parameters OK
03:37:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:37:40 Set A/D data flow result=40
03:37:40 Set A/D channel type result=40
03:37:40 Set A/D encoding result=40
03:37:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:37:40 Set channel filter=0.000000e+000  result=40
03:37:40 Config A/D  Result=40
03:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:37:40 Get A/D filter: -9.255963e+061  result=40
03:37:40 Get A/D value=-858993460  result=40
03:37:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:37:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:37:40 Parameters OK
03:37:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:37:40 Set A/D data flow result=40
03:37:40 Set A/D channel type result=40
03:37:40 Set A/D encoding result=40
03:37:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:37:40 Set channel filter=0.000000e+000  result=40
03:37:40 Config A/D  Result=40
03:37:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:37:40 Get A/D filter: -9.255963e+061  result=40
03:37:40 Get A/D value=-858993460  result=40
03:37:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:37:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:37:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:37:40 Aux=
03:37:40 Message to Camera, serial 180417 queued
03:38:15 Received message from Master: op=PointingHead serial=180429
03:38:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:38:15 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:38:16 Point started: ret=0
03:38:16 point_skyscan result=0
03:38:17 Check angles
03:38:17 SkyScan query
03:38:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:38:17 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
03:38:17 Message to Master queued w/err=0: serial=180429 error=0
03:38:22 Received message from Master: op=Filter serial=180430
03:38:22 Color wheel filter change from 2 to 2
03:38:22 FLIGetFilterPos err=0  currentPosition=2
03:38:22 FLIGetStepsRemaining err=0  RemainingSteps=0
03:38:22 Filter is already there-color wheel unchanged
03:38:22 Received message from Master: op=Shutter serial=180431
03:38:22 Shutter LASER open
03:38:22 Received message from Camera: op=State serial=180433
03:38:22 GetSingleValue result=40  Value=cccccccc
03:38:22 SkyScan query
03:38:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:38:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:38:23 Parameters OK
03:38:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:38:23 Set A/D data flow result=40
03:38:23 Set A/D channel type result=40
03:38:23 Set A/D encoding result=40
03:38:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:38:23 Set channel filter=0.000000e+000  result=40
03:38:23 Config A/D  Result=40
03:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:38:23 Get A/D filter: -9.255963e+061  result=40
03:38:23 Get A/D value=-858993460  result=40
03:38:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:38:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:38:23 Parameters OK
03:38:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:38:23 Set A/D data flow result=40
03:38:23 Set A/D channel type result=40
03:38:23 Set A/D encoding result=40
03:38:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:38:23 Set channel filter=0.000000e+000  result=40
03:38:23 Config A/D  Result=40
03:38:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:38:23 Get A/D filter: -9.255963e+061  result=40
03:38:23 Get A/D value=-858993460  result=40
03:38:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:38:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:38:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:38:23 Aux=
03:38:23 Message to Camera, serial 180433 queued
03:38:32 Received message from Master: op=Shutter serial=180443
03:38:32 Shutter LASER close
03:38:32 Received message from Master: op=PointingHead serial=180447
03:38:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:38:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:38:32 Point started: ret=0
03:38:32 point_skyscan result=0
03:38:33 Check angles
03:38:33 SkyScan query
03:38:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.98<-23532  Statuses=0008 0008
03:38:34 Msec=0  True Az=112.995  Ze=-172.98  Az status=0008  Ze status=0008
03:38:34 Message to Master queued w/err=0: serial=180447 error=0
03:38:39 Received message from Master: op=Filter serial=180448
03:38:39 Color wheel filter change from 2 to 2
03:38:39 FLIGetFilterPos err=0  currentPosition=2
03:38:39 FLIGetStepsRemaining err=0  RemainingSteps=0
03:38:39 Filter is already there-color wheel unchanged
03:38:39 Received message from Master: op=Shutter serial=180449
03:38:39 Shutter LASER close
03:38:39 Received message from Camera: op=State serial=180451
03:38:39 GetSingleValue result=40  Value=cccccccc
03:38:39 SkyScan query
03:38:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:38:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:38:39 Parameters OK
03:38:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:38:39 Set A/D data flow result=40
03:38:39 Set A/D channel type result=40
03:38:39 Set A/D encoding result=40
03:38:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:38:39 Set channel filter=0.000000e+000  result=40
03:38:39 Config A/D  Result=40
03:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:38:39 Get A/D filter: -9.255963e+061  result=40
03:38:39 Get A/D value=-858993460  result=40
03:38:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:38:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:38:39 Parameters OK
03:38:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:38:39 Set A/D data flow result=40
03:38:39 Set A/D channel type result=40
03:38:39 Set A/D encoding result=40
03:38:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:38:39 Set channel filter=0.000000e+000  result=40
03:38:39 Config A/D  Result=40
03:38:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:38:39 Get A/D filter: -9.255963e+061  result=40
03:38:39 Get A/D value=-858993460  result=40
03:38:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:38:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:38:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:38:39 Aux=
03:38:39 Message to Camera, serial 180451 queued
03:38:47 Received message from Master: op=PointingHead serial=180463
03:38:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:38:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:38:48 Point started: ret=0
03:38:48 point_skyscan result=0
03:38:49 Check angles
03:38:49 SkyScan query
03:38:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.665<-21511  Statuses=0008 0009
03:38:49 Msec=0  True Az=112.995  Ze=-142.665  Az status=0008  Ze status=0009
03:38:49 Check angles
03:38:49 SkyScan query
03:38:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
03:38:50 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
03:38:50 Check angles
03:38:50 SkyScan query
03:38:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.19<-18746  Statuses=0008 0009
03:38:51 Msec=1500  True Az=112.995  Ze=-101.19  Az status=0008  Ze status=0009
03:38:51 Check angles
03:38:51 SkyScan query
03:38:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.235<-17349  Statuses=0008 0009
03:38:51 Msec=2250  True Az=112.995  Ze=-80.235  Az status=0008  Ze status=0009
03:38:52 Check angles
03:38:52 SkyScan query
03:38:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.295<-15953  Statuses=0008 0009
03:38:52 Msec=3000  True Az=112.995  Ze=-59.295  Az status=0008  Ze status=0009
03:38:52 Check angles
03:38:52 SkyScan query
03:38:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.295<-14553  Statuses=0008 0009
03:38:53 Msec=3750  True Az=112.995  Ze=-38.295  Az status=0008  Ze status=0009
03:38:53 Check angles
03:38:53 SkyScan query
03:38:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.37<-13158  Statuses=0008 0009
03:38:54 Msec=4500  True Az=112.995  Ze=-17.37  Az status=0008  Ze status=0009
03:38:54 Check angles
03:38:54 SkyScan query
03:38:54 SkyScan query done: ret=0  az=112.995<-7533  ze=3.585<-11761  Statuses=0008 0009
03:38:54 Msec=5250  True Az=112.995  Ze=3.585  Az status=0008  Ze status=0009
03:38:55 Check angles
03:38:55 SkyScan query
03:38:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:38:55 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:38:55 Message to Master queued w/err=0: serial=180463 error=0
03:39:00 Received message from Master: op=Filter serial=180464
03:39:00 Color wheel filter change from 2 to 0
03:39:00 FLIGetFilterPos err=0  currentPosition=2
03:39:00 FLIGetStepsRemaining err=0  RemainingSteps=0
03:39:06 FLISetFilterPos err=0  rqPosition=0
03:39:06 FLIGetStepsRemaining err=0  RemainingSteps=0
03:39:06 Check after 0.00 sec for filter wheel  DIn/CWh=0
03:39:06 FLIGetFilterPos err=0  currentPosition=0
03:39:06 FLIGetStepsRemaining err=0  RemainingSteps=0
03:39:06 Received message from Master: op=Shutter serial=180465
03:39:06 Shutter LASER close
03:39:07 Received message from Camera: op=State serial=180467
03:39:07 GetSingleValue result=40  Value=cccccccc
03:39:07 SkyScan query
03:39:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:39:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:39:07 Parameters OK
03:39:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:39:07 Set A/D data flow result=40
03:39:07 Set A/D channel type result=40
03:39:07 Set A/D encoding result=40
03:39:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:39:07 Set channel filter=0.000000e+000  result=40
03:39:07 Config A/D  Result=40
03:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:39:07 Get A/D filter: -9.255963e+061  result=40
03:39:07 Get A/D value=-858993460  result=40
03:39:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:39:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:39:07 Parameters OK
03:39:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:39:07 Set A/D data flow result=40
03:39:07 Set A/D channel type result=40
03:39:07 Set A/D encoding result=40
03:39:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:39:07 Set channel filter=0.000000e+000  result=40
03:39:07 Config A/D  Result=40
03:39:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:39:07 Get A/D filter: -9.255963e+061  result=40
03:39:07 Get A/D value=-858993460  result=40
03:39:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:39:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:39:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:39:07 Aux=
03:39:07 Message to Camera, serial 180467 queued
03:39:44 Received message from Master: op=PointingHead serial=180480
03:39:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:39:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:39:44 Point started: ret=0
03:39:44 point_skyscan result=0
03:39:45 Check angles
03:39:45 SkyScan query
03:39:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:39:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:39:46 Message to Master queued w/err=0: serial=180480 error=0
03:39:51 Received message from Master: op=Filter serial=180481
03:39:51 Color wheel filter change from 0 to 0
03:39:51 FLIGetFilterPos err=0  currentPosition=0
03:39:51 FLIGetStepsRemaining err=0  RemainingSteps=0
03:39:51 Filter is already there-color wheel unchanged
03:39:51 Received message from Master: op=Shutter serial=180482
03:39:51 Shutter LASER close
03:39:51 Received message from Camera: op=State serial=180484
03:39:51 GetSingleValue result=40  Value=cccccccc
03:39:51 SkyScan query
03:39:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:39:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:39:51 Parameters OK
03:39:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:39:51 Set A/D data flow result=40
03:39:51 Set A/D channel type result=40
03:39:51 Set A/D encoding result=40
03:39:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:39:51 Set channel filter=0.000000e+000  result=40
03:39:51 Config A/D  Result=40
03:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:39:51 Get A/D filter: -9.255963e+061  result=40
03:39:51 Get A/D value=-858993460  result=40
03:39:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:39:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:39:51 Parameters OK
03:39:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:39:51 Set A/D data flow result=40
03:39:51 Set A/D channel type result=40
03:39:51 Set A/D encoding result=40
03:39:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:39:51 Set channel filter=0.000000e+000  result=40
03:39:51 Config A/D  Result=40
03:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:39:51 Get A/D filter: -9.255963e+061  result=40
03:39:51 Get A/D value=-858993460  result=40
03:39:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:39:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:39:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:39:51 Aux=
03:39:51 Message to Camera, serial 180484 queued
03:40:28 Received message from Master: op=PointingHead serial=180497
03:40:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
03:40:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
03:40:29 Point started: ret=0
03:40:29 point_skyscan result=0
03:40:29 Check angles
03:40:29 SkyScan query
03:40:30 SkyScan query done: ret=0  az=135.78<-9052  ze=-6.495<-12433  Statuses=0009 0008
03:40:30 Msec=0  True Az=135.78  Ze=-6.495  Az status=0009  Ze status=0008
03:40:30 Check angles
03:40:30 SkyScan query
03:40:31 SkyScan query done: ret=0  az=153.225<-10215  ze=-6.48<-12432  Statuses=0009 0008
03:40:31 Msec=750  True Az=153.225  Ze=-6.48  Az status=0009  Ze status=0008
03:40:31 Check angles
03:40:31 SkyScan query
03:40:32 SkyScan query done: ret=0  az=170.73<-11382  ze=-6.48<-12432  Statuses=0009 0008
03:40:32 Msec=1500  True Az=170.73  Ze=-6.48  Az status=0009  Ze status=0008
03:40:32 Check angles
03:40:32 SkyScan query
03:40:32 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
03:40:32 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
03:40:32 Message to Master queued w/err=0: serial=180497 error=0
03:40:37 Received message from Master: op=Filter serial=180498
03:40:37 Color wheel filter change from 0 to 0
03:40:37 FLIGetFilterPos err=0  currentPosition=0
03:40:37 FLIGetStepsRemaining err=0  RemainingSteps=0
03:40:37 Filter is already there-color wheel unchanged
03:40:37 Received message from Master: op=Shutter serial=180499
03:40:37 Shutter LASER close
03:40:37 Received message from Camera: op=State serial=180501
03:40:37 GetSingleValue result=40  Value=cccccccc
03:40:37 SkyScan query
03:40:38 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
03:40:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:40:38 Parameters OK
03:40:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:40:38 Set A/D data flow result=40
03:40:38 Set A/D channel type result=40
03:40:38 Set A/D encoding result=40
03:40:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:40:38 Set channel filter=0.000000e+000  result=40
03:40:38 Config A/D  Result=40
03:40:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:40:38 Get A/D filter: -9.255963e+061  result=40
03:40:38 Get A/D value=-858993460  result=40
03:40:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:40:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:40:38 Parameters OK
03:40:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:40:38 Set A/D data flow result=40
03:40:38 Set A/D channel type result=40
03:40:38 Set A/D encoding result=40
03:40:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:40:38 Set channel filter=0.000000e+000  result=40
03:40:38 Config A/D  Result=40
03:40:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:40:38 Get A/D filter: -9.255963e+061  result=40
03:40:38 Get A/D value=-858993460  result=40
03:40:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:40:38 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:40:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:40:38 Aux=
03:40:38 Message to Camera, serial 180501 queued
03:41:15 Received message from Master: op=PointingHead serial=180514
03:41:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:41:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:41:15 Point started: ret=0
03:41:15 point_skyscan result=0
03:41:16 Check angles
03:41:16 SkyScan query
03:41:17 SkyScan query done: ret=0  az=152.685<-10179  ze=6.51<-11566  Statuses=0009 0008
03:41:17 Msec=0  True Az=152.685  Ze=6.51  Az status=0009  Ze status=0008
03:41:17 Check angles
03:41:17 SkyScan query
03:41:17 SkyScan query done: ret=0  az=134.85<-8990  ze=6.495<-11567  Statuses=0009 0008
03:41:17 Msec=750  True Az=134.85  Ze=6.495  Az status=0009  Ze status=0008
03:41:18 Check angles
03:41:18 SkyScan query
03:41:18 SkyScan query done: ret=0  az=117.315<-7821  ze=6.495<-11567  Statuses=0009 0008
03:41:18 Msec=1500  True Az=117.315  Ze=6.495  Az status=0009  Ze status=0008
03:41:18 Check angles
03:41:18 SkyScan query
03:41:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:41:19 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:41:19 Message to Master queued w/err=0: serial=180514 error=0
03:41:24 Received message from Master: op=Filter serial=180515
03:41:24 Color wheel filter change from 0 to 0
03:41:24 FLIGetFilterPos err=0  currentPosition=0
03:41:24 FLIGetStepsRemaining err=0  RemainingSteps=0
03:41:24 Filter is already there-color wheel unchanged
03:41:24 Received message from Master: op=Shutter serial=180516
03:41:24 Shutter LASER close
03:41:24 Received message from Camera: op=State serial=180518
03:41:24 GetSingleValue result=40  Value=cccccccc
03:41:24 SkyScan query
03:41:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:41:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:41:25 Parameters OK
03:41:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:41:25 Set A/D data flow result=40
03:41:25 Set A/D channel type result=40
03:41:25 Set A/D encoding result=40
03:41:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:41:25 Set channel filter=0.000000e+000  result=40
03:41:25 Config A/D  Result=40
03:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:41:25 Get A/D filter: -9.255963e+061  result=40
03:41:25 Get A/D value=-858993460  result=40
03:41:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:41:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:41:25 Parameters OK
03:41:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:41:25 Set A/D data flow result=40
03:41:25 Set A/D channel type result=40
03:41:25 Set A/D encoding result=40
03:41:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:41:25 Set channel filter=0.000000e+000  result=40
03:41:25 Config A/D  Result=40
03:41:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:41:25 Get A/D filter: -9.255963e+061  result=40
03:41:25 Get A/D value=-858993460  result=40
03:41:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:41:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:41:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:41:25 Aux=
03:41:25 Message to Camera, serial 180518 queued
03:42:01 Received message from Master: op=PointingHead serial=180531
03:42:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:42:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:42:02 Point started: ret=0
03:42:02 point_skyscan result=0
03:42:03 Check angles
03:42:03 SkyScan query
03:42:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
03:42:03 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
03:42:03 Check angles
03:42:03 SkyScan query
03:42:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
03:42:04 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
03:42:04 Check angles
03:42:04 SkyScan query
03:42:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
03:42:05 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
03:42:05 Check angles
03:42:05 SkyScan query
03:42:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.325<-17755  Statuses=0008 0009
03:42:05 Msec=2250  True Az=112.995  Ze=-86.325  Az status=0008  Ze status=0009
03:42:06 Check angles
03:42:06 SkyScan query
03:42:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.265<-19151  Statuses=0008 0009
03:42:06 Msec=3000  True Az=112.995  Ze=-107.265  Az status=0008  Ze status=0009
03:42:06 Check angles
03:42:06 SkyScan query
03:42:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.22<-20548  Statuses=0008 0009
03:42:07 Msec=3750  True Az=112.995  Ze=-128.22  Az status=0008  Ze status=0009
03:42:07 Check angles
03:42:07 SkyScan query
03:42:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.19<-21946  Statuses=0008 0009
03:42:08 Msec=4500  True Az=112.995  Ze=-149.19  Az status=0008  Ze status=0009
03:42:08 Check angles
03:42:08 SkyScan query
03:42:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.13<-23342  Statuses=0008 0009
03:42:08 Msec=5250  True Az=112.995  Ze=-170.13  Az status=0008  Ze status=0009
03:42:09 Check angles
03:42:09 SkyScan query
03:42:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
03:42:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
03:42:09 Message to Master queued w/err=0: serial=180531 error=0
03:42:14 Received message from Master: op=Filter serial=180532
03:42:14 Color wheel filter change from 0 to 0
03:42:14 FLIGetFilterPos err=0  currentPosition=0
03:42:14 FLIGetStepsRemaining err=0  RemainingSteps=0
03:42:14 Filter is already there-color wheel unchanged
03:42:14 Received message from Master: op=Shutter serial=180533
03:42:14 Shutter LASER open
03:42:15 Received message from Camera: op=State serial=180535
03:42:15 GetSingleValue result=40  Value=cccccccc
03:42:15 SkyScan query
03:42:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:42:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:42:15 Parameters OK
03:42:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:42:15 Set A/D data flow result=40
03:42:15 Set A/D channel type result=40
03:42:15 Set A/D encoding result=40
03:42:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:42:15 Set channel filter=0.000000e+000  result=40
03:42:15 Config A/D  Result=40
03:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:42:15 Get A/D filter: -9.255963e+061  result=40
03:42:15 Get A/D value=-858993460  result=40
03:42:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:42:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:42:15 Parameters OK
03:42:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:42:15 Set A/D data flow result=40
03:42:15 Set A/D channel type result=40
03:42:15 Set A/D encoding result=40
03:42:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:42:15 Set channel filter=0.000000e+000  result=40
03:42:15 Config A/D  Result=40
03:42:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:42:15 Get A/D filter: -9.255963e+061  result=40
03:42:15 Get A/D value=-858993460  result=40
03:42:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:42:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:42:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:42:15 Aux=
03:42:15 Message to Camera, serial 180535 queued
03:42:24 Received message from Master: op=Shutter serial=180545
03:42:24 Shutter LASER close
03:42:24 Received message from Master: op=PointingHead serial=180549
03:42:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:42:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:42:24 Point started: ret=0
03:42:24 point_skyscan result=0
03:42:25 Check angles
03:42:25 SkyScan query
03:42:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
03:42:26 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
03:42:26 Check angles
03:42:26 SkyScan query
03:42:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
03:42:26 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
03:42:27 Check angles
03:42:27 SkyScan query
03:42:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.905<-18727  Statuses=0008 0009
03:42:27 Msec=1500  True Az=112.995  Ze=-100.905  Az status=0008  Ze status=0009
03:42:27 Check angles
03:42:27 SkyScan query
03:42:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.95<-17330  Statuses=0008 0009
03:42:28 Msec=2250  True Az=112.995  Ze=-79.95  Az status=0008  Ze status=0009
03:42:28 Check angles
03:42:28 SkyScan query
03:42:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.01<-15934  Statuses=0008 0009
03:42:29 Msec=3000  True Az=112.995  Ze=-59.01  Az status=0008  Ze status=0009
03:42:29 Check angles
03:42:29 SkyScan query
03:42:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
03:42:29 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
03:42:30 Check angles
03:42:30 SkyScan query
03:42:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.635<-13109  Statuses=0008 0009
03:42:30 Msec=4500  True Az=112.995  Ze=-16.635  Az status=0008  Ze status=0009
03:42:30 Check angles
03:42:30 SkyScan query
03:42:31 SkyScan query done: ret=0  az=112.995<-7533  ze=4.26<-11716  Statuses=0008 0009
03:42:31 Msec=5250  True Az=112.995  Ze=4.26  Az status=0008  Ze status=0009
03:42:31 Check angles
03:42:31 SkyScan query
03:42:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:42:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:42:32 Message to Master queued w/err=0: serial=180549 error=0
03:42:37 Received message from Master: op=Filter serial=180550
03:42:37 Color wheel filter change from 0 to 0
03:42:37 FLIGetFilterPos err=0  currentPosition=0
03:42:37 FLIGetStepsRemaining err=0  RemainingSteps=0
03:42:37 Filter is already there-color wheel unchanged
03:42:37 Received message from Master: op=Shutter serial=180551
03:42:37 Shutter LASER close
03:42:37 Received message from Camera: op=State serial=180553
03:42:37 GetSingleValue result=40  Value=cccccccc
03:42:37 SkyScan query
03:42:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:42:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:42:38 Parameters OK
03:42:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:42:38 Set A/D data flow result=40
03:42:38 Set A/D channel type result=40
03:42:38 Set A/D encoding result=40
03:42:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:42:38 Set channel filter=0.000000e+000  result=40
03:42:38 Config A/D  Result=40
03:42:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:42:38 Get A/D filter: -9.255963e+061  result=40
03:42:38 Get A/D value=-858993460  result=40
03:42:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:42:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:42:38 Parameters OK
03:42:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:42:38 Set A/D data flow result=40
03:42:38 Set A/D channel type result=40
03:42:38 Set A/D encoding result=40
03:42:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:42:38 Set channel filter=0.000000e+000  result=40
03:42:38 Config A/D  Result=40
03:42:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:42:38 Get A/D filter: -9.255963e+061  result=40
03:42:38 Get A/D value=-858993460  result=40
03:42:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:42:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:42:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:42:38 Aux=
03:42:38 Message to Camera, serial 180553 queued
03:43:13 Received message from Master: op=PointingHead serial=180565
03:43:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:43:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:43:14 Point started: ret=0
03:43:14 point_skyscan result=0
03:43:15 Check angles
03:43:15 SkyScan query
03:43:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:43:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:43:15 Message to Master queued w/err=0: serial=180565 error=0
03:43:20 Received message from Master: op=Filter serial=180566
03:43:20 Color wheel filter change from 0 to 0
03:43:20 FLIGetFilterPos err=0  currentPosition=0
03:43:20 FLIGetStepsRemaining err=0  RemainingSteps=0
03:43:20 Filter is already there-color wheel unchanged
03:43:20 Received message from Master: op=Shutter serial=180567
03:43:20 Shutter LASER close
03:43:20 Received message from Camera: op=State serial=180569
03:43:20 GetSingleValue result=40  Value=cccccccc
03:43:20 SkyScan query
03:43:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:43:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:43:21 Parameters OK
03:43:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:43:21 Set A/D data flow result=40
03:43:21 Set A/D channel type result=40
03:43:21 Set A/D encoding result=40
03:43:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:43:21 Set channel filter=0.000000e+000  result=40
03:43:21 Config A/D  Result=40
03:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:43:21 Get A/D filter: -9.255963e+061  result=40
03:43:21 Get A/D value=-858993460  result=40
03:43:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:43:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:43:21 Parameters OK
03:43:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:43:21 Set A/D data flow result=40
03:43:21 Set A/D channel type result=40
03:43:21 Set A/D encoding result=40
03:43:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:43:21 Set channel filter=0.000000e+000  result=40
03:43:21 Config A/D  Result=40
03:43:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:43:21 Get A/D filter: -9.255963e+061  result=40
03:43:21 Get A/D value=-858993460  result=40
03:43:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:43:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:43:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:43:21 Aux=
03:43:21 Message to Camera, serial 180569 queued
[UTC 2019-3-9  03:43:48]
03:43:58 Received message from Master: op=PointingHead serial=180582
03:43:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:43:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:43:58 Point started: ret=0
03:43:58 point_skyscan result=0
03:43:59 Check angles
03:43:59 SkyScan query
03:43:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:43:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:43:59 Message to Master queued w/err=0: serial=180582 error=0
03:44:04 Received message from Master: op=Filter serial=180583
03:44:04 Color wheel filter change from 0 to 0
03:44:04 FLIGetFilterPos err=0  currentPosition=0
03:44:04 FLIGetStepsRemaining err=0  RemainingSteps=0
03:44:04 Filter is already there-color wheel unchanged
03:44:05 Received message from Master: op=Shutter serial=180584
03:44:05 Shutter LASER close
03:44:05 Received message from Camera: op=State serial=180586
03:44:05 GetSingleValue result=40  Value=cccccccc
03:44:05 SkyScan query
03:44:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:44:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:44:05 Parameters OK
03:44:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:44:05 Set A/D data flow result=40
03:44:05 Set A/D channel type result=40
03:44:05 Set A/D encoding result=40
03:44:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:44:05 Set channel filter=0.000000e+000  result=40
03:44:05 Config A/D  Result=40
03:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:44:05 Get A/D filter: -9.255963e+061  result=40
03:44:05 Get A/D value=-858993460  result=40
03:44:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:44:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:44:05 Parameters OK
03:44:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:44:05 Set A/D data flow result=40
03:44:05 Set A/D channel type result=40
03:44:05 Set A/D encoding result=40
03:44:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:44:05 Set channel filter=0.000000e+000  result=40
03:44:05 Config A/D  Result=40
03:44:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:44:05 Get A/D filter: -9.255963e+061  result=40
03:44:05 Get A/D value=-858993460  result=40
03:44:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:44:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:44:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:44:05 Aux=
03:44:05 Message to Camera, serial 180586 queued
03:44:42 Received message from Master: op=PointingHead serial=180599
03:44:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:44:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:44:42 Point started: ret=0
03:44:42 point_skyscan result=0
03:44:43 Check angles
03:44:43 SkyScan query
03:44:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:44:44 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:44:44 Message to Master queued w/err=0: serial=180599 error=0
03:44:49 Received message from Master: op=Filter serial=180600
03:44:49 Color wheel filter change from 0 to 0
03:44:49 FLIGetFilterPos err=0  currentPosition=0
03:44:49 FLIGetStepsRemaining err=0  RemainingSteps=0
03:44:49 Filter is already there-color wheel unchanged
03:44:49 Received message from Master: op=Shutter serial=180601
03:44:49 Shutter LASER close
03:44:49 Received message from Camera: op=State serial=180603
03:44:49 GetSingleValue result=40  Value=cccccccc
03:44:49 SkyScan query
03:44:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:44:50 Parameters OK
03:44:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:44:50 Set A/D data flow result=40
03:44:50 Set A/D channel type result=40
03:44:50 Set A/D encoding result=40
03:44:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:44:50 Set channel filter=0.000000e+000  result=40
03:44:50 Config A/D  Result=40
03:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:44:50 Get A/D filter: -9.255963e+061  result=40
03:44:50 Get A/D value=-858993460  result=40
03:44:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:44:50 Parameters OK
03:44:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:44:50 Set A/D data flow result=40
03:44:50 Set A/D channel type result=40
03:44:50 Set A/D encoding result=40
03:44:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:44:50 Set channel filter=0.000000e+000  result=40
03:44:50 Config A/D  Result=40
03:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:44:50 Get A/D filter: -9.255963e+061  result=40
03:44:50 Get A/D value=-858993460  result=40
03:44:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:44:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:44:50 Aux=
03:44:50 Message to Camera, serial 180603 queued
03:45:26 Received message from Master: op=PointingHead serial=180616
03:45:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:45:26 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:45:27 Point started: ret=0
03:45:27 point_skyscan result=0
03:45:28 Check angles
03:45:28 SkyScan query
03:45:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.655<-13577  Statuses=0008 0009
03:45:28 Msec=0  True Az=112.995  Ze=-23.655  Az status=0008  Ze status=0009
03:45:28 Check angles
03:45:28 SkyScan query
03:45:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.06<-15004  Statuses=0008 0009
03:45:29 Msec=750  True Az=112.995  Ze=-45.06  Az status=0008  Ze status=0009
03:45:29 Check angles
03:45:29 SkyScan query
03:45:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.985<-16399  Statuses=0008 0009
03:45:30 Msec=1500  True Az=112.995  Ze=-65.985  Az status=0008  Ze status=0009
03:45:30 Check angles
03:45:30 SkyScan query
03:45:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.94<-17796  Statuses=0008 0009
03:45:30 Msec=2250  True Az=112.995  Ze=-86.94  Az status=0008  Ze status=0009
03:45:31 Check angles
03:45:31 SkyScan query
03:45:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.33<-19222  Statuses=0008 0009
03:45:31 Msec=3000  True Az=112.995  Ze=-108.33  Az status=0008  Ze status=0009
03:45:31 Check angles
03:45:31 SkyScan query
03:45:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.72<-20648  Statuses=0008 0009
03:45:32 Msec=3750  True Az=112.995  Ze=-129.72  Az status=0008  Ze status=0009
03:45:32 Check angles
03:45:32 SkyScan query
03:45:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.66<-22044  Statuses=0008 0009
03:45:33 Msec=4500  True Az=112.995  Ze=-150.66  Az status=0008  Ze status=0009
03:45:33 Check angles
03:45:33 SkyScan query
03:45:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.375<-23425  Statuses=0008 0009
03:45:33 Msec=5250  True Az=112.995  Ze=-171.375  Az status=0008  Ze status=0009
03:45:34 Check angles
03:45:34 SkyScan query
03:45:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
03:45:34 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
03:45:34 Message to Master queued w/err=0: serial=180616 error=0
03:45:39 Received message from Master: op=Filter serial=180617
03:45:39 Color wheel filter change from 0 to 0
03:45:39 FLIGetFilterPos err=0  currentPosition=0
03:45:39 FLIGetStepsRemaining err=0  RemainingSteps=0
03:45:39 Filter is already there-color wheel unchanged
03:45:39 Received message from Master: op=Shutter serial=180618
03:45:39 Shutter LASER open
03:45:39 Received message from Camera: op=State serial=180620
03:45:39 GetSingleValue result=40  Value=cccccccc
03:45:39 SkyScan query
03:45:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:45:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:45:40 Parameters OK
03:45:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:45:40 Set A/D data flow result=40
03:45:40 Set A/D channel type result=40
03:45:40 Set A/D encoding result=40
03:45:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:45:40 Set channel filter=0.000000e+000  result=40
03:45:40 Config A/D  Result=40
03:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:45:40 Get A/D filter: -9.255963e+061  result=40
03:45:40 Get A/D value=-858993460  result=40
03:45:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:45:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:45:40 Parameters OK
03:45:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:45:40 Set A/D data flow result=40
03:45:40 Set A/D channel type result=40
03:45:40 Set A/D encoding result=40
03:45:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:45:40 Set channel filter=0.000000e+000  result=40
03:45:40 Config A/D  Result=40
03:45:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:45:40 Get A/D filter: -9.255963e+061  result=40
03:45:40 Get A/D value=-858993460  result=40
03:45:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:45:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:45:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:45:40 Aux=
03:45:40 Message to Camera, serial 180620 queued
03:45:48 Received message from Master: op=Shutter serial=180630
03:45:48 Shutter LASER close
03:45:49 Received message from Master: op=PointingHead serial=180634
03:45:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:45:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:45:49 Point started: ret=0
03:45:49 point_skyscan result=0
03:45:50 Check angles
03:45:50 SkyScan query
03:45:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
03:45:51 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
03:45:51 Check angles
03:45:51 SkyScan query
03:45:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.695<-20113  Statuses=0008 0009
03:45:52 Msec=750  True Az=112.995  Ze=-121.695  Az status=0008  Ze status=0009
03:45:52 Check angles
03:45:52 SkyScan query
03:45:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
03:45:52 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
03:45:52 Check angles
03:45:52 SkyScan query
03:45:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.8<-17320  Statuses=0008 0009
03:45:53 Msec=2250  True Az=112.995  Ze=-79.8  Az status=0008  Ze status=0009
03:45:53 Check angles
03:45:53 SkyScan query
03:45:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
03:45:54 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
03:45:54 Check angles
03:45:54 SkyScan query
03:45:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.89<-14526  Statuses=0008 0009
03:45:55 Msec=3750  True Az=112.995  Ze=-37.89  Az status=0008  Ze status=0009
03:45:55 Check angles
03:45:55 SkyScan query
03:45:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.935<-13129  Statuses=0008 0009
03:45:55 Msec=4500  True Az=112.995  Ze=-16.935  Az status=0008  Ze status=0009
03:45:55 Check angles
03:45:55 SkyScan query
03:45:56 SkyScan query done: ret=0  az=112.995<-7533  ze=4.005<-11733  Statuses=0008 0009
03:45:56 Msec=5250  True Az=112.995  Ze=4.005  Az status=0008  Ze status=0009
03:45:56 Check angles
03:45:56 SkyScan query
03:45:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:45:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:45:57 Message to Master queued w/err=0: serial=180634 error=0
03:46:02 Received message from Master: op=Filter serial=180635
03:46:02 Color wheel filter change from 0 to 0
03:46:02 FLIGetFilterPos err=0  currentPosition=0
03:46:02 FLIGetStepsRemaining err=0  RemainingSteps=0
03:46:02 Filter is already there-color wheel unchanged
03:46:02 Received message from Master: op=Shutter serial=180636
03:46:02 Shutter LASER close
03:46:02 Received message from Camera: op=State serial=180638
03:46:02 GetSingleValue result=40  Value=cccccccc
03:46:02 SkyScan query
03:46:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:46:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:46:03 Parameters OK
03:46:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:46:03 Set A/D data flow result=40
03:46:03 Set A/D channel type result=40
03:46:03 Set A/D encoding result=40
03:46:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:46:03 Set channel filter=0.000000e+000  result=40
03:46:03 Config A/D  Result=40
03:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:46:03 Get A/D filter: -9.255963e+061  result=40
03:46:03 Get A/D value=-858993460  result=40
03:46:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:46:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:46:03 Parameters OK
03:46:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:46:03 Set A/D data flow result=40
03:46:03 Set A/D channel type result=40
03:46:03 Set A/D encoding result=40
03:46:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:46:03 Set channel filter=0.000000e+000  result=40
03:46:03 Config A/D  Result=40
03:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:46:03 Get A/D filter: -9.255963e+061  result=40
03:46:03 Get A/D value=-858993460  result=40
03:46:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:46:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:46:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:46:03 Aux=
03:46:03 Message to Camera, serial 180638 queued
03:46:40 Received message from Master: op=PointingHead serial=180651
03:46:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:46:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:46:40 Point started: ret=0
03:46:40 point_skyscan result=0
03:46:41 Check angles
03:46:41 SkyScan query
03:46:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:46:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:46:41 Message to Master queued w/err=0: serial=180651 error=0
03:46:46 Received message from Master: op=Filter serial=180652
03:46:46 Color wheel filter change from 0 to 0
03:46:46 FLIGetFilterPos err=0  currentPosition=0
03:46:46 FLIGetStepsRemaining err=0  RemainingSteps=0
03:46:46 Filter is already there-color wheel unchanged
03:46:46 Received message from Master: op=Shutter serial=180653
03:46:46 Shutter LASER close
03:46:46 Received message from Camera: op=State serial=180655
03:46:46 GetSingleValue result=40  Value=cccccccc
03:46:46 SkyScan query
03:46:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:46:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:46:47 Parameters OK
03:46:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:46:47 Set A/D data flow result=40
03:46:47 Set A/D channel type result=40
03:46:47 Set A/D encoding result=40
03:46:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:46:47 Set channel filter=0.000000e+000  result=40
03:46:47 Config A/D  Result=40
03:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:46:47 Get A/D filter: -9.255963e+061  result=40
03:46:47 Get A/D value=-858993460  result=40
03:46:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:46:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:46:47 Parameters OK
03:46:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:46:47 Set A/D data flow result=40
03:46:47 Set A/D channel type result=40
03:46:47 Set A/D encoding result=40
03:46:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:46:47 Set channel filter=0.000000e+000  result=40
03:46:47 Config A/D  Result=40
03:46:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:46:47 Get A/D filter: -9.255963e+061  result=40
03:46:47 Get A/D value=-858993460  result=40
03:46:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:46:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:46:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:46:47 Aux=
03:46:47 Message to Camera, serial 180655 queued
03:47:24 Received message from Master: op=PointingHead serial=180668
03:47:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
03:47:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
03:47:24 Point started: ret=0
03:47:24 point_skyscan result=0
03:47:25 Check angles
03:47:25 SkyScan query
03:47:25 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.495<-12433  Statuses=0009 0008
03:47:25 Msec=0  True Az=136.11  Ze=-6.495  Az status=0009  Ze status=0008
03:47:26 Check angles
03:47:26 SkyScan query
03:47:26 SkyScan query done: ret=0  az=153.525<-10235  ze=-6.48<-12432  Statuses=0009 0008
03:47:26 Msec=750  True Az=153.525  Ze=-6.48  Az status=0009  Ze status=0008
03:47:26 Check angles
03:47:26 SkyScan query
03:47:27 SkyScan query done: ret=0  az=171.285<-11419  ze=-6.48<-12432  Statuses=0009 0008
03:47:27 Msec=1500  True Az=171.285  Ze=-6.48  Az status=0009  Ze status=0008
03:47:27 Check angles
03:47:27 SkyScan query
03:47:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
03:47:28 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
03:47:28 Message to Master queued w/err=0: serial=180668 error=0
03:47:33 Received message from Master: op=Filter serial=180669
03:47:33 Color wheel filter change from 0 to 0
03:47:33 FLIGetFilterPos err=0  currentPosition=0
03:47:33 FLIGetStepsRemaining err=0  RemainingSteps=0
03:47:33 Filter is already there-color wheel unchanged
03:47:33 Received message from Master: op=Shutter serial=180670
03:47:33 Shutter LASER close
03:47:33 Received message from Camera: op=State serial=180672
03:47:33 GetSingleValue result=40  Value=cccccccc
03:47:33 SkyScan query
03:47:34 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
03:47:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:47:34 Parameters OK
03:47:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:47:34 Set A/D data flow result=40
03:47:34 Set A/D channel type result=40
03:47:34 Set A/D encoding result=40
03:47:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:47:34 Set channel filter=0.000000e+000  result=40
03:47:34 Config A/D  Result=40
03:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:47:34 Get A/D filter: -9.255963e+061  result=40
03:47:34 Get A/D value=-858993460  result=40
03:47:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:47:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:47:34 Parameters OK
03:47:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:47:34 Set A/D data flow result=40
03:47:34 Set A/D channel type result=40
03:47:34 Set A/D encoding result=40
03:47:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:47:34 Set channel filter=0.000000e+000  result=40
03:47:34 Config A/D  Result=40
03:47:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:47:34 Get A/D filter: -9.255963e+061  result=40
03:47:34 Get A/D value=-858993460  result=40
03:47:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:47:34 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:47:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:47:34 Aux=
03:47:34 Message to Camera, serial 180672 queued
03:48:10 Received message from Master: op=PointingHead serial=180685
03:48:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:48:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:48:11 Point started: ret=0
03:48:11 point_skyscan result=0
03:48:12 Check angles
03:48:12 SkyScan query
03:48:12 SkyScan query done: ret=0  az=152.64<-10176  ze=6.51<-11566  Statuses=0009 0008
03:48:12 Msec=0  True Az=152.64  Ze=6.51  Az status=0009  Ze status=0008
03:48:12 Check angles
03:48:12 SkyScan query
03:48:13 SkyScan query done: ret=0  az=135.18<-9012  ze=6.495<-11567  Statuses=0009 0008
03:48:13 Msec=750  True Az=135.18  Ze=6.495  Az status=0009  Ze status=0008
03:48:13 Check angles
03:48:13 SkyScan query
03:48:14 SkyScan query done: ret=0  az=117.735<-7849  ze=6.495<-11567  Statuses=0009 0008
03:48:14 Msec=1500  True Az=117.735  Ze=6.495  Az status=0009  Ze status=0008
03:48:14 Check angles
03:48:14 SkyScan query
03:48:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:48:14 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:48:14 Message to Master queued w/err=0: serial=180685 error=0
03:48:19 Received message from Master: op=Filter serial=180686
03:48:19 Color wheel filter change from 0 to 0
03:48:19 FLIGetFilterPos err=0  currentPosition=0
03:48:19 FLIGetStepsRemaining err=0  RemainingSteps=0
03:48:19 Filter is already there-color wheel unchanged
03:48:20 Received message from Master: op=Shutter serial=180687
03:48:20 Shutter LASER close
03:48:20 Received message from Camera: op=State serial=180689
03:48:20 GetSingleValue result=40  Value=cccccccc
03:48:20 SkyScan query
03:48:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:48:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:48:20 Parameters OK
03:48:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:48:20 Set A/D data flow result=40
03:48:20 Set A/D channel type result=40
03:48:20 Set A/D encoding result=40
03:48:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:48:20 Set channel filter=0.000000e+000  result=40
03:48:20 Config A/D  Result=40
03:48:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:48:20 Get A/D filter: -9.255963e+061  result=40
03:48:20 Get A/D value=-858993460  result=40
03:48:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:48:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:48:20 Parameters OK
03:48:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:48:20 Set A/D data flow result=40
03:48:20 Set A/D channel type result=40
03:48:20 Set A/D encoding result=40
03:48:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:48:20 Set channel filter=0.000000e+000  result=40
03:48:20 Config A/D  Result=40
03:48:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:48:20 Get A/D filter: -9.255963e+061  result=40
03:48:20 Get A/D value=-858993460  result=40
03:48:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:48:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:48:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:48:20 Aux=
03:48:20 Message to Camera, serial 180689 queued
03:48:57 Received message from Master: op=PointingHead serial=180702
03:48:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:48:57 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:48:57 Point started: ret=0
03:48:57 point_skyscan result=0
03:48:58 Check angles
03:48:58 SkyScan query
03:48:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.16<-13544  Statuses=0008 0009
03:48:59 Msec=0  True Az=112.995  Ze=-23.16  Az status=0008  Ze status=0009
03:48:59 Check angles
03:48:59 SkyScan query
03:48:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.13<-14942  Statuses=0008 0009
03:48:59 Msec=750  True Az=112.995  Ze=-44.13  Az status=0008  Ze status=0009
03:49:00 Check angles
03:49:00 SkyScan query
03:49:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.085<-16339  Statuses=0008 0009
03:49:00 Msec=1500  True Az=112.995  Ze=-65.085  Az status=0008  Ze status=0009
03:49:00 Check angles
03:49:00 SkyScan query
03:49:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.055<-17737  Statuses=0008 0009
03:49:01 Msec=2250  True Az=112.995  Ze=-86.055  Az status=0008  Ze status=0009
03:49:01 Check angles
03:49:01 SkyScan query
03:49:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.995<-19133  Statuses=0008 0009
03:49:02 Msec=3000  True Az=112.995  Ze=-106.995  Az status=0008  Ze status=0009
03:49:02 Check angles
03:49:02 SkyScan query
03:49:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.95<-20530  Statuses=0008 0009
03:49:02 Msec=3750  True Az=112.995  Ze=-127.95  Az status=0008  Ze status=0009
03:49:03 Check angles
03:49:03 SkyScan query
03:49:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.905<-21927  Statuses=0008 0009
03:49:03 Msec=4500  True Az=112.995  Ze=-148.905  Az status=0008  Ze status=0009
03:49:03 Check angles
03:49:03 SkyScan query
03:49:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.86<-23324  Statuses=0008 0009
03:49:04 Msec=5250  True Az=112.995  Ze=-169.86  Az status=0008  Ze status=0009
03:49:04 Check angles
03:49:04 SkyScan query
03:49:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
03:49:05 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
03:49:05 Message to Master queued w/err=0: serial=180702 error=0
03:49:10 Received message from Master: op=Filter serial=180703
03:49:10 Color wheel filter change from 0 to 0
03:49:10 FLIGetFilterPos err=0  currentPosition=0
03:49:10 FLIGetStepsRemaining err=0  RemainingSteps=0
03:49:10 Filter is already there-color wheel unchanged
03:49:10 Received message from Master: op=Shutter serial=180704
03:49:10 Shutter LASER open
03:49:10 Received message from Camera: op=State serial=180706
03:49:10 GetSingleValue result=40  Value=cccccccc
03:49:10 SkyScan query
03:49:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:49:11 Parameters OK
03:49:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:49:11 Set A/D data flow result=40
03:49:11 Set A/D channel type result=40
03:49:11 Set A/D encoding result=40
03:49:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:49:11 Set channel filter=0.000000e+000  result=40
03:49:11 Config A/D  Result=40
03:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:49:11 Get A/D filter: -9.255963e+061  result=40
03:49:11 Get A/D value=-858993460  result=40
03:49:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:49:11 Parameters OK
03:49:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:49:11 Set A/D data flow result=40
03:49:11 Set A/D channel type result=40
03:49:11 Set A/D encoding result=40
03:49:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:49:11 Set channel filter=0.000000e+000  result=40
03:49:11 Config A/D  Result=40
03:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:49:11 Get A/D filter: -9.255963e+061  result=40
03:49:11 Get A/D value=-858993460  result=40
03:49:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:49:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:49:11 Aux=
03:49:11 Message to Camera, serial 180706 queued
03:49:19 Received message from Master: op=Shutter serial=180716
03:49:19 Shutter LASER close
03:49:20 Received message from Master: op=PointingHead serial=180720
03:49:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:49:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:49:20 Point started: ret=0
03:49:20 point_skyscan result=0
03:49:21 Check angles
03:49:21 SkyScan query
03:49:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.28<-21552  Statuses=0008 0009
03:49:21 Msec=0  True Az=112.995  Ze=-143.28  Az status=0008  Ze status=0009
03:49:21 Check angles
03:49:21 SkyScan query
03:49:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.355<-20157  Statuses=0008 0009
03:49:22 Msec=750  True Az=112.995  Ze=-122.355  Az status=0008  Ze status=0009
03:49:22 Check angles
03:49:22 SkyScan query
03:49:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.385<-18759  Statuses=0008 0009
03:49:23 Msec=1500  True Az=112.995  Ze=-101.385  Az status=0008  Ze status=0009
03:49:23 Check angles
03:49:23 SkyScan query
03:49:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.415<-17361  Statuses=0008 0009
03:49:23 Msec=2250  True Az=112.995  Ze=-80.415  Az status=0008  Ze status=0009
03:49:24 Check angles
03:49:24 SkyScan query
03:49:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.475<-15965  Statuses=0008 0009
03:49:24 Msec=3000  True Az=112.995  Ze=-59.475  Az status=0008  Ze status=0009
03:49:24 Check angles
03:49:24 SkyScan query
03:49:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.505<-14567  Statuses=0008 0009
03:49:25 Msec=3750  True Az=112.995  Ze=-38.505  Az status=0008  Ze status=0009
03:49:25 Check angles
03:49:25 SkyScan query
03:49:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.58<-13172  Statuses=0008 0009
03:49:26 Msec=4500  True Az=112.995  Ze=-17.58  Az status=0008  Ze status=0009
03:49:26 Check angles
03:49:26 SkyScan query
03:49:26 SkyScan query done: ret=0  az=112.995<-7533  ze=3.39<-11774  Statuses=0008 0009
03:49:26 Msec=5250  True Az=112.995  Ze=3.39  Az status=0008  Ze status=0009
03:49:27 Check angles
03:49:27 SkyScan query
03:49:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:49:27 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:49:27 Message to Master queued w/err=0: serial=180720 error=0
03:49:32 Received message from Master: op=Filter serial=180721
03:49:32 Color wheel filter change from 0 to 0
03:49:32 FLIGetFilterPos err=0  currentPosition=0
03:49:32 FLIGetStepsRemaining err=0  RemainingSteps=0
03:49:32 Filter is already there-color wheel unchanged
03:49:32 Received message from Master: op=Shutter serial=180722
03:49:32 Shutter LASER close
03:49:33 Received message from Camera: op=State serial=180724
03:49:33 GetSingleValue result=40  Value=cccccccc
03:49:33 SkyScan query
03:49:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:49:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:49:33 Parameters OK
03:49:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:49:33 Set A/D data flow result=40
03:49:33 Set A/D channel type result=40
03:49:33 Set A/D encoding result=40
03:49:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:49:33 Set channel filter=0.000000e+000  result=40
03:49:33 Config A/D  Result=40
03:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:49:33 Get A/D filter: -9.255963e+061  result=40
03:49:33 Get A/D value=-858993460  result=40
03:49:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:49:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:49:33 Parameters OK
03:49:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:49:33 Set A/D data flow result=40
03:49:33 Set A/D channel type result=40
03:49:33 Set A/D encoding result=40
03:49:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:49:33 Set channel filter=0.000000e+000  result=40
03:49:33 Config A/D  Result=40
03:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:49:33 Get A/D filter: -9.255963e+061  result=40
03:49:33 Get A/D value=-858993460  result=40
03:49:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:49:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:49:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:49:33 Aux=
03:49:33 Message to Camera, serial 180724 queued
03:50:10 Received message from Master: op=PointingHead serial=180737
03:50:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:50:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:50:10 Point started: ret=0
03:50:10 point_skyscan result=0
03:50:11 Check angles
03:50:11 SkyScan query
03:50:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:50:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:50:12 Message to Master queued w/err=0: serial=180737 error=0
03:50:17 Received message from Master: op=Filter serial=180738
03:50:17 Color wheel filter change from 0 to 0
03:50:17 FLIGetFilterPos err=0  currentPosition=0
03:50:17 FLIGetStepsRemaining err=0  RemainingSteps=0
03:50:17 Filter is already there-color wheel unchanged
03:50:17 Received message from Master: op=Shutter serial=180739
03:50:17 Shutter LASER close
03:50:17 Received message from Camera: op=State serial=180741
03:50:17 GetSingleValue result=40  Value=cccccccc
03:50:17 SkyScan query
03:50:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:50:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:50:17 Parameters OK
03:50:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:50:17 Set A/D data flow result=40
03:50:17 Set A/D channel type result=40
03:50:17 Set A/D encoding result=40
03:50:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:50:17 Set channel filter=0.000000e+000  result=40
03:50:17 Config A/D  Result=40
03:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:50:17 Get A/D filter: -9.255963e+061  result=40
03:50:17 Get A/D value=-858993460  result=40
03:50:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:50:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:50:17 Parameters OK
03:50:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:50:17 Set A/D data flow result=40
03:50:17 Set A/D channel type result=40
03:50:17 Set A/D encoding result=40
03:50:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:50:17 Set channel filter=0.000000e+000  result=40
03:50:17 Config A/D  Result=40
03:50:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:50:17 Get A/D filter: -9.255963e+061  result=40
03:50:17 Get A/D value=-858993460  result=40
03:50:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:50:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:50:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:50:17 Aux=
03:50:17 Message to Camera, serial 180741 queued
03:50:54 Received message from Master: op=PointingHead serial=180754
03:50:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:50:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:50:55 Point started: ret=0
03:50:55 point_skyscan result=0
03:50:55 Check angles
03:50:55 SkyScan query
03:50:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:50:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:50:56 Message to Master queued w/err=0: serial=180754 error=0
03:51:01 Received message from Master: op=Filter serial=180755
03:51:01 Color wheel filter change from 0 to 0
03:51:01 FLIGetFilterPos err=0  currentPosition=0
03:51:01 FLIGetStepsRemaining err=0  RemainingSteps=0
03:51:01 Filter is already there-color wheel unchanged
03:51:01 Received message from Master: op=Shutter serial=180756
03:51:01 Shutter LASER close
03:51:01 Received message from Camera: op=State serial=180758
03:51:01 GetSingleValue result=40  Value=cccccccc
03:51:01 SkyScan query
03:51:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:51:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:51:02 Parameters OK
03:51:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:51:02 Set A/D data flow result=40
03:51:02 Set A/D channel type result=40
03:51:02 Set A/D encoding result=40
03:51:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:51:02 Set channel filter=0.000000e+000  result=40
03:51:02 Config A/D  Result=40
03:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:51:02 Get A/D filter: -9.255963e+061  result=40
03:51:02 Get A/D value=-858993460  result=40
03:51:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:51:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:51:02 Parameters OK
03:51:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:51:02 Set A/D data flow result=40
03:51:02 Set A/D channel type result=40
03:51:02 Set A/D encoding result=40
03:51:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:51:02 Set channel filter=0.000000e+000  result=40
03:51:02 Config A/D  Result=40
03:51:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:51:02 Get A/D filter: -9.255963e+061  result=40
03:51:02 Get A/D value=-858993460  result=40
03:51:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:51:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:51:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:51:02 Aux=
03:51:02 Message to Camera, serial 180758 queued
03:51:38 Received message from Master: op=PointingHead serial=180770
03:51:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:51:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:51:38 Point started: ret=0
03:51:38 point_skyscan result=0
03:51:39 Check angles
03:51:39 SkyScan query
03:51:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:51:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:51:39 Message to Master queued w/err=0: serial=180770 error=0
03:51:44 Received message from Master: op=Filter serial=180771
03:51:44 Color wheel filter change from 0 to 0
03:51:44 FLIGetFilterPos err=0  currentPosition=0
03:51:44 FLIGetStepsRemaining err=0  RemainingSteps=0
03:51:44 Filter is already there-color wheel unchanged
03:51:44 Received message from Master: op=Shutter serial=180772
03:51:44 Shutter LASER close
03:51:44 Received message from Camera: op=State serial=180774
03:51:44 GetSingleValue result=40  Value=cccccccc
03:51:44 SkyScan query
03:51:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:51:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:51:45 Parameters OK
03:51:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:51:45 Set A/D data flow result=40
03:51:45 Set A/D channel type result=40
03:51:45 Set A/D encoding result=40
03:51:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:51:45 Set channel filter=0.000000e+000  result=40
03:51:45 Config A/D  Result=40
03:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:51:45 Get A/D filter: -9.255963e+061  result=40
03:51:45 Get A/D value=-858993460  result=40
03:51:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:51:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:51:45 Parameters OK
03:51:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:51:45 Set A/D data flow result=40
03:51:45 Set A/D channel type result=40
03:51:45 Set A/D encoding result=40
03:51:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:51:45 Set channel filter=0.000000e+000  result=40
03:51:45 Config A/D  Result=40
03:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:51:45 Get A/D filter: -9.255963e+061  result=40
03:51:45 Get A/D value=-858993460  result=40
03:51:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:51:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:51:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:51:45 Aux=
03:51:45 Message to Camera, serial 180774 queued
03:52:22 Received message from Master: op=PointingHead serial=180787
03:52:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:52:22 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:52:22 Point started: ret=0
03:52:22 point_skyscan result=0
03:52:23 Check angles
03:52:23 SkyScan query
03:52:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.22<-13548  Statuses=0008 0009
03:52:24 Msec=0  True Az=112.995  Ze=-23.22  Az status=0008  Ze status=0009
03:52:24 Check angles
03:52:24 SkyScan query
03:52:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.19<-14946  Statuses=0008 0009
03:52:24 Msec=750  True Az=112.995  Ze=-44.19  Az status=0008  Ze status=0009
03:52:24 Check angles
03:52:24 SkyScan query
03:52:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.16<-16344  Statuses=0008 0009
03:52:25 Msec=1500  True Az=112.995  Ze=-65.16  Az status=0008  Ze status=0009
03:52:25 Check angles
03:52:25 SkyScan query
03:52:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.115<-17741  Statuses=0008 0009
03:52:26 Msec=2250  True Az=112.995  Ze=-86.115  Az status=0008  Ze status=0009
03:52:26 Check angles
03:52:26 SkyScan query
03:52:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.055<-19137  Statuses=0008 0009
03:52:27 Msec=3000  True Az=112.995  Ze=-107.055  Az status=0008  Ze status=0009
03:52:27 Check angles
03:52:27 SkyScan query
03:52:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.01<-20534  Statuses=0008 0009
03:52:27 Msec=3750  True Az=112.995  Ze=-128.01  Az status=0008  Ze status=0009
03:52:27 Check angles
03:52:27 SkyScan query
03:52:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.965<-21931  Statuses=0008 0009
03:52:28 Msec=4500  True Az=112.995  Ze=-148.965  Az status=0008  Ze status=0009
03:52:28 Check angles
03:52:28 SkyScan query
03:52:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.905<-23327  Statuses=0008 0009
03:52:29 Msec=5250  True Az=112.995  Ze=-169.905  Az status=0008  Ze status=0009
03:52:29 Check angles
03:52:29 SkyScan query
03:52:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
03:52:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
03:52:30 Message to Master queued w/err=0: serial=180787 error=0
03:52:35 Received message from Master: op=Filter serial=180788
03:52:35 Color wheel filter change from 0 to 0
03:52:35 FLIGetFilterPos err=0  currentPosition=0
03:52:35 FLIGetStepsRemaining err=0  RemainingSteps=0
03:52:35 Filter is already there-color wheel unchanged
03:52:35 Received message from Master: op=Shutter serial=180789
03:52:35 Shutter LASER open
03:52:35 Received message from Camera: op=State serial=180791
03:52:35 GetSingleValue result=40  Value=cccccccc
03:52:35 SkyScan query
03:52:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:52:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:52:36 Parameters OK
03:52:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:52:36 Set A/D data flow result=40
03:52:36 Set A/D channel type result=40
03:52:36 Set A/D encoding result=40
03:52:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:52:36 Set channel filter=0.000000e+000  result=40
03:52:36 Config A/D  Result=40
03:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:52:36 Get A/D filter: -9.255963e+061  result=40
03:52:36 Get A/D value=-858993460  result=40
03:52:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:52:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:52:36 Parameters OK
03:52:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:52:36 Set A/D data flow result=40
03:52:36 Set A/D channel type result=40
03:52:36 Set A/D encoding result=40
03:52:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:52:36 Set channel filter=0.000000e+000  result=40
03:52:36 Config A/D  Result=40
03:52:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:52:36 Get A/D filter: -9.255963e+061  result=40
03:52:36 Get A/D value=-858993460  result=40
03:52:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:52:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:52:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:52:36 Aux=
03:52:36 Message to Camera, serial 180791 queued
03:52:44 Received message from Master: op=Shutter serial=180801
03:52:44 Shutter LASER close
03:52:45 Received message from Master: op=PointingHead serial=180805
03:52:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:52:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:52:45 Point started: ret=0
03:52:45 point_skyscan result=0
03:52:46 Check angles
03:52:46 SkyScan query
03:52:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
03:52:46 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
03:52:46 Check angles
03:52:46 SkyScan query
03:52:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.115<-20141  Statuses=0008 0009
03:52:47 Msec=750  True Az=112.995  Ze=-122.115  Az status=0008  Ze status=0009
03:52:47 Check angles
03:52:47 SkyScan query
03:52:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
03:52:48 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
03:52:48 Check angles
03:52:48 SkyScan query
03:52:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.77<-17318  Statuses=0008 0009
03:52:49 Msec=2250  True Az=112.995  Ze=-79.77  Az status=0008  Ze status=0009
03:52:49 Check angles
03:52:49 SkyScan query
03:52:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.83<-15922  Statuses=0008 0009
03:52:49 Msec=3000  True Az=112.995  Ze=-58.83  Az status=0008  Ze status=0009
03:52:49 Check angles
03:52:49 SkyScan query
03:52:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.86<-14524  Statuses=0008 0009
03:52:50 Msec=3750  True Az=112.995  Ze=-37.86  Az status=0008  Ze status=0009
03:52:50 Check angles
03:52:50 SkyScan query
03:52:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.905<-13127  Statuses=0008 0009
03:52:51 Msec=4500  True Az=112.995  Ze=-16.905  Az status=0008  Ze status=0009
03:52:51 Check angles
03:52:51 SkyScan query
03:52:52 SkyScan query done: ret=0  az=112.995<-7533  ze=4.035<-11731  Statuses=0008 0009
03:52:52 Msec=5250  True Az=112.995  Ze=4.035  Az status=0008  Ze status=0009
03:52:52 Check angles
03:52:52 SkyScan query
03:52:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:52:52 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:52:52 Message to Master queued w/err=0: serial=180805 error=0
03:52:57 Received message from Master: op=Filter serial=180806
03:52:57 Color wheel filter change from 0 to 0
03:52:57 FLIGetFilterPos err=0  currentPosition=0
03:52:57 FLIGetStepsRemaining err=0  RemainingSteps=0
03:52:57 Filter is already there-color wheel unchanged
03:52:57 Received message from Master: op=Shutter serial=180807
03:52:57 Shutter LASER close
03:52:58 Received message from Camera: op=State serial=180809
03:52:58 GetSingleValue result=40  Value=cccccccc
03:52:58 SkyScan query
03:52:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:52:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:52:58 Parameters OK
03:52:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:52:58 Set A/D data flow result=40
03:52:58 Set A/D channel type result=40
03:52:58 Set A/D encoding result=40
03:52:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:52:58 Set channel filter=0.000000e+000  result=40
03:52:58 Config A/D  Result=40
03:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:52:58 Get A/D filter: -9.255963e+061  result=40
03:52:58 Get A/D value=-858993460  result=40
03:52:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:52:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:52:58 Parameters OK
03:52:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:52:58 Set A/D data flow result=40
03:52:58 Set A/D channel type result=40
03:52:58 Set A/D encoding result=40
03:52:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:52:58 Set channel filter=0.000000e+000  result=40
03:52:58 Config A/D  Result=40
03:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:52:58 Get A/D filter: -9.255963e+061  result=40
03:52:58 Get A/D value=-858993460  result=40
03:52:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:52:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:52:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:52:58 Aux=
03:52:58 Message to Camera, serial 180809 queued
03:53:35 Received message from Master: op=PointingHead serial=180822
03:53:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:53:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:53:35 Point started: ret=0
03:53:35 point_skyscan result=0
03:53:36 Check angles
03:53:36 SkyScan query
03:53:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:53:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:53:37 Message to Master queued w/err=0: serial=180822 error=0
03:53:42 Received message from Master: op=Filter serial=180823
03:53:42 Color wheel filter change from 0 to 0
03:53:42 FLIGetFilterPos err=0  currentPosition=0
03:53:42 FLIGetStepsRemaining err=0  RemainingSteps=0
03:53:42 Filter is already there-color wheel unchanged
03:53:42 Received message from Master: op=Shutter serial=180824
03:53:42 Shutter LASER close
03:53:42 Received message from Camera: op=State serial=180826
03:53:42 GetSingleValue result=40  Value=cccccccc
03:53:42 SkyScan query
03:53:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:53:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:53:42 Parameters OK
03:53:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:53:42 Set A/D data flow result=40
03:53:42 Set A/D channel type result=40
03:53:42 Set A/D encoding result=40
03:53:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:53:42 Set channel filter=0.000000e+000  result=40
03:53:42 Config A/D  Result=40
03:53:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:53:42 Get A/D filter: -9.255963e+061  result=40
03:53:42 Get A/D value=-858993460  result=40
03:53:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:53:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:53:42 Parameters OK
03:53:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:53:42 Set A/D data flow result=40
03:53:42 Set A/D channel type result=40
03:53:42 Set A/D encoding result=40
03:53:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:53:42 Set channel filter=0.000000e+000  result=40
03:53:42 Config A/D  Result=40
03:53:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:53:42 Get A/D filter: -9.255963e+061  result=40
03:53:42 Get A/D value=-858993460  result=40
03:53:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:53:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:53:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:53:42 Aux=
03:53:42 Message to Camera, serial 180826 queued
03:54:19 Received message from Master: op=PointingHead serial=180839
03:54:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
03:54:19 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
03:54:20 Point started: ret=0
03:54:20 point_skyscan result=0
03:54:20 Check angles
03:54:20 SkyScan query
03:54:21 SkyScan query done: ret=0  az=135.9<-9060  ze=-6.495<-12433  Statuses=0009 0008
03:54:21 Msec=0  True Az=135.9  Ze=-6.495  Az status=0009  Ze status=0008
03:54:21 Check angles
03:54:21 SkyScan query
03:54:22 SkyScan query done: ret=0  az=153.42<-10228  ze=-6.48<-12432  Statuses=0009 0008
[UTC 2019-3-9  03:54:22]
03:54:22 Msec=750  True Az=153.42  Ze=-6.48  Az status=0009  Ze status=0008
03:54:22 Check angles
03:54:22 SkyScan query
03:54:22 SkyScan query done: ret=0  az=170.85<-11390  ze=-6.48<-12432  Statuses=0009 0008
03:54:22 Msec=1500  True Az=170.85  Ze=-6.48  Az status=0009  Ze status=0008
03:54:23 Check angles
03:54:23 SkyScan query
03:54:23 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
03:54:23 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
03:54:23 Message to Master queued w/err=0: serial=180839 error=0
03:54:28 Received message from Master: op=Filter serial=180840
03:54:28 Color wheel filter change from 0 to 0
03:54:28 FLIGetFilterPos err=0  currentPosition=0
03:54:28 FLIGetStepsRemaining err=0  RemainingSteps=0
03:54:28 Filter is already there-color wheel unchanged
03:54:28 Received message from Master: op=Shutter serial=180841
03:54:28 Shutter LASER close
03:54:28 Received message from Camera: op=State serial=180843
03:54:28 GetSingleValue result=40  Value=cccccccc
03:54:28 SkyScan query
03:54:29 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
03:54:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:54:29 Parameters OK
03:54:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:54:29 Set A/D data flow result=40
03:54:29 Set A/D channel type result=40
03:54:29 Set A/D encoding result=40
03:54:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:54:29 Set channel filter=0.000000e+000  result=40
03:54:29 Config A/D  Result=40
03:54:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:54:29 Get A/D filter: -9.255963e+061  result=40
03:54:29 Get A/D value=-858993460  result=40
03:54:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:54:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:54:29 Parameters OK
03:54:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:54:29 Set A/D data flow result=40
03:54:29 Set A/D channel type result=40
03:54:29 Set A/D encoding result=40
03:54:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:54:29 Set channel filter=0.000000e+000  result=40
03:54:29 Config A/D  Result=40
03:54:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:54:29 Get A/D filter: -9.255963e+061  result=40
03:54:29 Get A/D value=-858993460  result=40
03:54:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:54:29 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:54:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:54:29 Aux=
03:54:29 Message to Camera, serial 180843 queued
03:55:06 Received message from Master: op=PointingHead serial=180856
03:55:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:55:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:55:06 Point started: ret=0
03:55:06 point_skyscan result=0
03:55:07 Check angles
03:55:07 SkyScan query
03:55:07 SkyScan query done: ret=0  az=153.225<-10215  ze=6.51<-11566  Statuses=0009 0008
03:55:07 Msec=0  True Az=153.225  Ze=6.51  Az status=0009  Ze status=0008
03:55:08 Check angles
03:55:08 SkyScan query
03:55:08 SkyScan query done: ret=0  az=135.75<-9050  ze=6.495<-11567  Statuses=0009 0008
03:55:08 Msec=750  True Az=135.75  Ze=6.495  Az status=0009  Ze status=0008
03:55:08 Check angles
03:55:08 SkyScan query
03:55:09 SkyScan query done: ret=0  az=117.825<-7855  ze=6.495<-11567  Statuses=0009 0008
03:55:09 Msec=1500  True Az=117.825  Ze=6.495  Az status=0009  Ze status=0008
03:55:09 Check angles
03:55:09 SkyScan query
03:55:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:55:10 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:55:10 Message to Master queued w/err=0: serial=180856 error=0
03:55:15 Received message from Master: op=Filter serial=180857
03:55:15 Color wheel filter change from 0 to 0
03:55:15 FLIGetFilterPos err=0  currentPosition=0
03:55:15 FLIGetStepsRemaining err=0  RemainingSteps=0
03:55:15 Filter is already there-color wheel unchanged
03:55:15 Received message from Master: op=Shutter serial=180858
03:55:15 Shutter LASER close
03:55:15 Received message from Camera: op=State serial=180860
03:55:15 GetSingleValue result=40  Value=cccccccc
03:55:15 SkyScan query
03:55:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:55:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:55:16 Parameters OK
03:55:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:55:16 Set A/D data flow result=40
03:55:16 Set A/D channel type result=40
03:55:16 Set A/D encoding result=40
03:55:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:55:16 Set channel filter=0.000000e+000  result=40
03:55:16 Config A/D  Result=40
03:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:55:16 Get A/D filter: -9.255963e+061  result=40
03:55:16 Get A/D value=-858993460  result=40
03:55:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:55:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:55:16 Parameters OK
03:55:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:55:16 Set A/D data flow result=40
03:55:16 Set A/D channel type result=40
03:55:16 Set A/D encoding result=40
03:55:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:55:16 Set channel filter=0.000000e+000  result=40
03:55:16 Config A/D  Result=40
03:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:55:16 Get A/D filter: -9.255963e+061  result=40
03:55:16 Get A/D value=-858993460  result=40
03:55:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:55:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:55:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:55:16 Aux=
03:55:16 Message to Camera, serial 180860 queued
03:55:52 Received message from Master: op=PointingHead serial=180873
03:55:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:55:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:55:53 Point started: ret=0
03:55:53 point_skyscan result=0
03:55:54 Check angles
03:55:54 SkyScan query
03:55:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.82<-13588  Statuses=0008 0009
03:55:54 Msec=0  True Az=112.995  Ze=-23.82  Az status=0008  Ze status=0009
03:55:54 Check angles
03:55:54 SkyScan query
03:55:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.195<-15013  Statuses=0008 0009
03:55:55 Msec=750  True Az=112.995  Ze=-45.195  Az status=0008  Ze status=0009
03:55:55 Check angles
03:55:55 SkyScan query
03:55:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.15<-16410  Statuses=0008 0009
03:55:56 Msec=1500  True Az=112.995  Ze=-66.15  Az status=0008  Ze status=0009
03:55:56 Check angles
03:55:56 SkyScan query
03:55:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.54<-17836  Statuses=0008 0009
03:55:56 Msec=2250  True Az=112.995  Ze=-87.54  Az status=0008  Ze status=0009
03:55:57 Check angles
03:55:57 SkyScan query
03:55:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.48<-19232  Statuses=0008 0009
03:55:57 Msec=3000  True Az=112.995  Ze=-108.48  Az status=0008  Ze status=0009
03:55:57 Check angles
03:55:57 SkyScan query
03:55:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.435<-20629  Statuses=0008 0009
03:55:58 Msec=3750  True Az=112.995  Ze=-129.435  Az status=0008  Ze status=0009
03:55:58 Check angles
03:55:58 SkyScan query
03:55:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.39<-22026  Statuses=0008 0009
03:55:59 Msec=4500  True Az=112.995  Ze=-150.39  Az status=0008  Ze status=0009
03:55:59 Check angles
03:55:59 SkyScan query
03:55:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.465<-23431  Statuses=0008 0009
03:55:59 Msec=5250  True Az=112.995  Ze=-171.465  Az status=0008  Ze status=0009
03:56:00 Check angles
03:56:00 SkyScan query
03:56:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
03:56:00 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
03:56:00 Message to Master queued w/err=0: serial=180873 error=0
03:56:05 Received message from Master: op=Filter serial=180874
03:56:05 Color wheel filter change from 0 to 0
03:56:05 FLIGetFilterPos err=0  currentPosition=0
03:56:05 FLIGetStepsRemaining err=0  RemainingSteps=0
03:56:05 Filter is already there-color wheel unchanged
03:56:05 Received message from Master: op=Shutter serial=180875
03:56:05 Shutter LASER open
03:56:05 Received message from Camera: op=State serial=180877
03:56:05 GetSingleValue result=40  Value=cccccccc
03:56:05 SkyScan query
03:56:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:56:06 Parameters OK
03:56:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:56:06 Set A/D data flow result=40
03:56:06 Set A/D channel type result=40
03:56:06 Set A/D encoding result=40
03:56:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:56:06 Set channel filter=0.000000e+000  result=40
03:56:06 Config A/D  Result=40
03:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:56:06 Get A/D filter: -9.255963e+061  result=40
03:56:06 Get A/D value=-858993460  result=40
03:56:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:56:06 Parameters OK
03:56:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:56:06 Set A/D data flow result=40
03:56:06 Set A/D channel type result=40
03:56:06 Set A/D encoding result=40
03:56:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:56:06 Set channel filter=0.000000e+000  result=40
03:56:06 Config A/D  Result=40
03:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:56:06 Get A/D filter: -9.255963e+061  result=40
03:56:06 Get A/D value=-858993460  result=40
03:56:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:56:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:56:06 Aux=
03:56:06 Message to Camera, serial 180877 queued
03:56:14 Received message from Master: op=Shutter serial=180887
03:56:14 Shutter LASER close
03:56:15 Received message from Master: op=PointingHead serial=180891
03:56:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:56:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:56:15 Point started: ret=0
03:56:15 point_skyscan result=0
03:56:16 Check angles
03:56:16 SkyScan query
03:56:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.935<-21529  Statuses=0008 0009
03:56:17 Msec=0  True Az=112.995  Ze=-142.935  Az status=0008  Ze status=0009
03:56:17 Check angles
03:56:17 SkyScan query
03:56:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.98<-20132  Statuses=0008 0009
03:56:17 Msec=750  True Az=112.995  Ze=-121.98  Az status=0008  Ze status=0009
03:56:18 Check angles
03:56:18 SkyScan query
03:56:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.04<-18736  Statuses=0008 0009
03:56:18 Msec=1500  True Az=112.995  Ze=-101.04  Az status=0008  Ze status=0009
03:56:18 Check angles
03:56:18 SkyScan query
03:56:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.1<-17340  Statuses=0008 0009
03:56:19 Msec=2250  True Az=112.995  Ze=-80.1  Az status=0008  Ze status=0009
03:56:19 Check angles
03:56:19 SkyScan query
03:56:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.145<-15943  Statuses=0008 0009
03:56:20 Msec=3000  True Az=112.995  Ze=-59.145  Az status=0008  Ze status=0009
03:56:20 Check angles
03:56:20 SkyScan query
03:56:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.145<-14543  Statuses=0008 0009
03:56:20 Msec=3750  True Az=112.995  Ze=-38.145  Az status=0008  Ze status=0009
03:56:21 Check angles
03:56:21 SkyScan query
03:56:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.205<-13147  Statuses=0008 0009
03:56:21 Msec=4500  True Az=112.995  Ze=-17.205  Az status=0008  Ze status=0009
03:56:21 Check angles
03:56:21 SkyScan query
03:56:22 SkyScan query done: ret=0  az=112.995<-7533  ze=3.75<-11750  Statuses=0008 0009
03:56:22 Msec=5250  True Az=112.995  Ze=3.75  Az status=0008  Ze status=0009
03:56:22 Check angles
03:56:22 SkyScan query
03:56:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:56:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:56:23 Message to Master queued w/err=0: serial=180891 error=0
03:56:28 Received message from Master: op=Filter serial=180892
03:56:28 Color wheel filter change from 0 to 0
03:56:28 FLIGetFilterPos err=0  currentPosition=0
03:56:28 FLIGetStepsRemaining err=0  RemainingSteps=0
03:56:28 Filter is already there-color wheel unchanged
03:56:28 Received message from Master: op=Shutter serial=180893
03:56:28 Shutter LASER close
03:56:28 Received message from Camera: op=State serial=180895
03:56:28 GetSingleValue result=40  Value=cccccccc
03:56:28 SkyScan query
03:56:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:56:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:56:29 Parameters OK
03:56:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:56:29 Set A/D data flow result=40
03:56:29 Set A/D channel type result=40
03:56:29 Set A/D encoding result=40
03:56:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:56:29 Set channel filter=0.000000e+000  result=40
03:56:29 Config A/D  Result=40
03:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:56:29 Get A/D filter: -9.255963e+061  result=40
03:56:29 Get A/D value=-858993460  result=40
03:56:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:56:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:56:29 Parameters OK
03:56:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:56:29 Set A/D data flow result=40
03:56:29 Set A/D channel type result=40
03:56:29 Set A/D encoding result=40
03:56:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:56:29 Set channel filter=0.000000e+000  result=40
03:56:29 Config A/D  Result=40
03:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:56:29 Get A/D filter: -9.255963e+061  result=40
03:56:29 Get A/D value=-858993460  result=40
03:56:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:56:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:56:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:56:29 Aux=
03:56:29 Message to Camera, serial 180895 queued
03:57:05 Received message from Master: op=PointingHead serial=180908
03:57:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:57:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:57:06 Point started: ret=0
03:57:06 point_skyscan result=0
03:57:07 Check angles
03:57:07 SkyScan query
03:57:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:57:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:57:07 Message to Master queued w/err=0: serial=180908 error=0
03:57:12 Received message from Master: op=Filter serial=180909
03:57:12 Color wheel filter change from 0 to 0
03:57:12 FLIGetFilterPos err=0  currentPosition=0
03:57:12 FLIGetStepsRemaining err=0  RemainingSteps=0
03:57:12 Filter is already there-color wheel unchanged
03:57:12 Received message from Master: op=Shutter serial=180910
03:57:12 Shutter LASER close
03:57:12 Received message from Camera: op=State serial=180912
03:57:12 GetSingleValue result=40  Value=cccccccc
03:57:12 SkyScan query
03:57:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:57:13 Parameters OK
03:57:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:57:13 Set A/D data flow result=40
03:57:13 Set A/D channel type result=40
03:57:13 Set A/D encoding result=40
03:57:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:57:13 Set channel filter=0.000000e+000  result=40
03:57:13 Config A/D  Result=40
03:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:57:13 Get A/D filter: -9.255963e+061  result=40
03:57:13 Get A/D value=-858993460  result=40
03:57:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:57:13 Parameters OK
03:57:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:57:13 Set A/D data flow result=40
03:57:13 Set A/D channel type result=40
03:57:13 Set A/D encoding result=40
03:57:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:57:13 Set channel filter=0.000000e+000  result=40
03:57:13 Config A/D  Result=40
03:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:57:13 Get A/D filter: -9.255963e+061  result=40
03:57:13 Get A/D value=-858993460  result=40
03:57:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:57:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:57:13 Aux=
03:57:13 Message to Camera, serial 180912 queued
03:57:50 Received message from Master: op=PointingHead serial=180925
03:57:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:57:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:57:50 Point started: ret=0
03:57:50 point_skyscan result=0
03:57:51 Check angles
03:57:51 SkyScan query
03:57:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:57:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:57:51 Message to Master queued w/err=0: serial=180925 error=0
03:57:56 Received message from Master: op=Filter serial=180926
03:57:56 Color wheel filter change from 0 to 0
03:57:56 FLIGetFilterPos err=0  currentPosition=0
03:57:56 FLIGetStepsRemaining err=0  RemainingSteps=0
03:57:56 Filter is already there-color wheel unchanged
03:57:57 Received message from Master: op=Shutter serial=180927
03:57:57 Shutter LASER close
03:57:57 Received message from Camera: op=State serial=180929
03:57:57 GetSingleValue result=40  Value=cccccccc
03:57:57 SkyScan query
03:57:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:57:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:57:57 Parameters OK
03:57:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:57:57 Set A/D data flow result=40
03:57:57 Set A/D channel type result=40
03:57:57 Set A/D encoding result=40
03:57:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:57:57 Set channel filter=0.000000e+000  result=40
03:57:57 Config A/D  Result=40
03:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:57:57 Get A/D filter: -9.255963e+061  result=40
03:57:57 Get A/D value=-858993460  result=40
03:57:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:57:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:57:57 Parameters OK
03:57:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:57:57 Set A/D data flow result=40
03:57:57 Set A/D channel type result=40
03:57:57 Set A/D encoding result=40
03:57:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:57:57 Set channel filter=0.000000e+000  result=40
03:57:57 Config A/D  Result=40
03:57:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:57:57 Get A/D filter: -9.255963e+061  result=40
03:57:57 Get A/D value=-858993460  result=40
03:57:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:57:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:57:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:57:57 Aux=
03:57:57 Message to Camera, serial 180929 queued
03:58:34 Received message from Master: op=PointingHead serial=180942
03:58:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:58:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:58:34 Point started: ret=0
03:58:34 point_skyscan result=0
03:58:35 Check angles
03:58:35 SkyScan query
03:58:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:58:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
03:58:36 Message to Master queued w/err=0: serial=180942 error=0
03:58:41 Received message from Master: op=Filter serial=180943
03:58:41 Color wheel filter change from 0 to 0
03:58:41 FLIGetFilterPos err=0  currentPosition=0
03:58:41 FLIGetStepsRemaining err=0  RemainingSteps=0
03:58:41 Filter is already there-color wheel unchanged
03:58:41 Received message from Master: op=Shutter serial=180944
03:58:41 Shutter LASER close
03:58:41 Received message from Camera: op=State serial=180946
03:58:41 GetSingleValue result=40  Value=cccccccc
03:58:41 SkyScan query
03:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:58:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:58:42 Parameters OK
03:58:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:58:42 Set A/D data flow result=40
03:58:42 Set A/D channel type result=40
03:58:42 Set A/D encoding result=40
03:58:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:58:42 Set channel filter=0.000000e+000  result=40
03:58:42 Config A/D  Result=40
03:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:58:42 Get A/D filter: -9.255963e+061  result=40
03:58:42 Get A/D value=-858993460  result=40
03:58:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:58:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:58:42 Parameters OK
03:58:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:58:42 Set A/D data flow result=40
03:58:42 Set A/D channel type result=40
03:58:42 Set A/D encoding result=40
03:58:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:58:42 Set channel filter=0.000000e+000  result=40
03:58:42 Config A/D  Result=40
03:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:58:42 Get A/D filter: -9.255963e+061  result=40
03:58:42 Get A/D value=-858993460  result=40
03:58:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:58:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:58:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:58:42 Aux=
03:58:42 Message to Camera, serial 180946 queued
03:59:18 Received message from Master: op=PointingHead serial=180959
03:59:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
03:59:18 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
03:59:19 Point started: ret=0
03:59:19 point_skyscan result=0
03:59:19 Check angles
03:59:19 SkyScan query
03:59:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.7<-13580  Statuses=0008 0009
03:59:20 Msec=0  True Az=112.995  Ze=-23.7  Az status=0008  Ze status=0009
03:59:20 Check angles
03:59:20 SkyScan query
03:59:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.655<-14977  Statuses=0008 0009
03:59:21 Msec=750  True Az=112.995  Ze=-44.655  Az status=0008  Ze status=0009
03:59:21 Check angles
03:59:21 SkyScan query
03:59:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.61<-16374  Statuses=0008 0009
03:59:22 Msec=1500  True Az=112.995  Ze=-65.61  Az status=0008  Ze status=0009
03:59:22 Check angles
03:59:22 SkyScan query
03:59:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.985<-17799  Statuses=0008 0009
03:59:22 Msec=2250  True Az=112.995  Ze=-86.985  Az status=0008  Ze status=0009
03:59:22 Check angles
03:59:22 SkyScan query
03:59:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.94<-19196  Statuses=0008 0009
03:59:23 Msec=3000  True Az=112.995  Ze=-107.94  Az status=0008  Ze status=0009
03:59:23 Check angles
03:59:23 SkyScan query
03:59:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.895<-20593  Statuses=0008 0009
03:59:24 Msec=3750  True Az=112.995  Ze=-128.895  Az status=0008  Ze status=0009
03:59:24 Check angles
03:59:24 SkyScan query
03:59:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.835<-21989  Statuses=0008 0009
03:59:25 Msec=4500  True Az=112.995  Ze=-149.835  Az status=0008  Ze status=0009
03:59:25 Check angles
03:59:25 SkyScan query
03:59:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.73<-23382  Statuses=0008 0009
03:59:25 Msec=5250  True Az=112.995  Ze=-170.73  Az status=0008  Ze status=0009
03:59:25 Check angles
03:59:25 SkyScan query
03:59:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
03:59:26 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
03:59:26 Message to Master queued w/err=0: serial=180959 error=0
03:59:31 Received message from Master: op=Filter serial=180960
03:59:31 Color wheel filter change from 0 to 0
03:59:31 FLIGetFilterPos err=0  currentPosition=0
03:59:31 FLIGetStepsRemaining err=0  RemainingSteps=0
03:59:31 Filter is already there-color wheel unchanged
03:59:31 Received message from Master: op=Shutter serial=180961
03:59:31 Shutter LASER open
03:59:31 Received message from Camera: op=State serial=180963
03:59:31 GetSingleValue result=40  Value=cccccccc
03:59:31 SkyScan query
03:59:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
03:59:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:59:32 Parameters OK
03:59:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:59:32 Set A/D data flow result=40
03:59:32 Set A/D channel type result=40
03:59:32 Set A/D encoding result=40
03:59:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:59:32 Set channel filter=0.000000e+000  result=40
03:59:32 Config A/D  Result=40
03:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:59:32 Get A/D filter: -9.255963e+061  result=40
03:59:32 Get A/D value=-858993460  result=40
03:59:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:59:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:59:32 Parameters OK
03:59:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:59:32 Set A/D data flow result=40
03:59:32 Set A/D channel type result=40
03:59:32 Set A/D encoding result=40
03:59:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:59:32 Set channel filter=0.000000e+000  result=40
03:59:32 Config A/D  Result=40
03:59:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:59:32 Get A/D filter: -9.255963e+061  result=40
03:59:32 Get A/D value=-858993460  result=40
03:59:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:59:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:59:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:59:32 Aux=
03:59:32 Message to Camera, serial 180963 queued
03:59:40 Received message from Master: op=Shutter serial=180973
03:59:40 Shutter LASER close
03:59:41 Received message from Master: op=PointingHead serial=180977
03:59:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
03:59:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
03:59:41 Point started: ret=0
03:59:41 point_skyscan result=0
03:59:42 Check angles
03:59:42 SkyScan query
03:59:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.295<-21553  Statuses=0008 0009
03:59:43 Msec=0  True Az=112.995  Ze=-143.295  Az status=0008  Ze status=0009
03:59:43 Check angles
03:59:43 SkyScan query
03:59:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.89<-20126  Statuses=0008 0009
03:59:43 Msec=750  True Az=112.995  Ze=-121.89  Az status=0008  Ze status=0009
03:59:44 Check angles
03:59:44 SkyScan query
03:59:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.965<-18731  Statuses=0008 0009
03:59:44 Msec=1500  True Az=112.995  Ze=-100.965  Az status=0008  Ze status=0009
03:59:44 Check angles
03:59:44 SkyScan query
03:59:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.995<-17333  Statuses=0008 0009
03:59:45 Msec=2250  True Az=112.995  Ze=-79.995  Az status=0008  Ze status=0009
03:59:45 Check angles
03:59:45 SkyScan query
03:59:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.055<-15937  Statuses=0008 0009
03:59:46 Msec=3000  True Az=112.995  Ze=-59.055  Az status=0008  Ze status=0009
03:59:46 Check angles
03:59:46 SkyScan query
03:59:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.07<-14538  Statuses=0008 0009
03:59:46 Msec=3750  True Az=112.995  Ze=-38.07  Az status=0008  Ze status=0009
03:59:47 Check angles
03:59:47 SkyScan query
03:59:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.13<-13142  Statuses=0008 0009
03:59:47 Msec=4500  True Az=112.995  Ze=-17.13  Az status=0008  Ze status=0009
03:59:47 Check angles
03:59:47 SkyScan query
03:59:48 SkyScan query done: ret=0  az=112.995<-7533  ze=3.825<-11745  Statuses=0008 0009
03:59:48 Msec=5250  True Az=112.995  Ze=3.825  Az status=0008  Ze status=0009
03:59:48 Check angles
03:59:48 SkyScan query
03:59:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
03:59:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
03:59:49 Message to Master queued w/err=0: serial=180977 error=0
03:59:54 Received message from Master: op=Filter serial=180978
03:59:54 Color wheel filter change from 0 to 0
03:59:54 FLIGetFilterPos err=0  currentPosition=0
03:59:54 FLIGetStepsRemaining err=0  RemainingSteps=0
03:59:54 Filter is already there-color wheel unchanged
03:59:54 Received message from Master: op=Shutter serial=180979
03:59:54 Shutter LASER close
03:59:54 Received message from Camera: op=State serial=180981
03:59:54 GetSingleValue result=40  Value=cccccccc
03:59:54 SkyScan query
03:59:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
03:59:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:59:55 Parameters OK
03:59:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:59:55 Set A/D data flow result=40
03:59:55 Set A/D channel type result=40
03:59:55 Set A/D encoding result=40
03:59:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:59:55 Set channel filter=0.000000e+000  result=40
03:59:55 Config A/D  Result=40
03:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:59:55 Get A/D filter: -9.255963e+061  result=40
03:59:55 Get A/D value=-858993460  result=40
03:59:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:59:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
03:59:55 Parameters OK
03:59:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
03:59:55 Set A/D data flow result=40
03:59:55 Set A/D channel type result=40
03:59:55 Set A/D encoding result=40
03:59:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
03:59:55 Set channel filter=0.000000e+000  result=40
03:59:55 Config A/D  Result=40
03:59:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
03:59:55 Get A/D filter: -9.255963e+061  result=40
03:59:55 Get A/D value=-858993460  result=40
03:59:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
03:59:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
03:59:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
03:59:55 Aux=
03:59:55 Message to Camera, serial 180981 queued
04:00:31 Received message from Master: op=PointingHead serial=180994
04:00:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:00:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:00:32 Point started: ret=0
04:00:32 point_skyscan result=0
04:00:33 Check angles
04:00:33 SkyScan query
04:00:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:00:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:00:33 Message to Master queued w/err=0: serial=180994 error=0
04:00:38 Received message from Master: op=Filter serial=180995
04:00:38 Color wheel filter change from 0 to 0
04:00:38 FLIGetFilterPos err=0  currentPosition=0
04:00:38 FLIGetStepsRemaining err=0  RemainingSteps=0
04:00:38 Filter is already there-color wheel unchanged
04:00:38 Received message from Master: op=Shutter serial=180996
04:00:38 Shutter LASER close
04:00:38 Received message from Camera: op=State serial=180998
04:00:38 GetSingleValue result=40  Value=cccccccc
04:00:38 SkyScan query
04:00:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:00:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:00:39 Parameters OK
04:00:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:00:39 Set A/D data flow result=40
04:00:39 Set A/D channel type result=40
04:00:39 Set A/D encoding result=40
04:00:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:00:39 Set channel filter=0.000000e+000  result=40
04:00:39 Config A/D  Result=40
04:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:00:39 Get A/D filter: -9.255963e+061  result=40
04:00:39 Get A/D value=-858993460  result=40
04:00:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:00:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:00:39 Parameters OK
04:00:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:00:39 Set A/D data flow result=40
04:00:39 Set A/D channel type result=40
04:00:39 Set A/D encoding result=40
04:00:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:00:39 Set channel filter=0.000000e+000  result=40
04:00:39 Config A/D  Result=40
04:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:00:39 Get A/D filter: -9.255963e+061  result=40
04:00:39 Get A/D value=-858993460  result=40
04:00:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:00:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:00:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:00:39 Aux=
04:00:39 Message to Camera, serial 180998 queued
04:01:16 Received message from Master: op=PointingHead serial=181011
04:01:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:01:16 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:01:16 Point started: ret=0
04:01:16 point_skyscan result=0
04:01:17 Check angles
04:01:17 SkyScan query
04:01:17 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.495<-12433  Statuses=0009 0008
04:01:17 Msec=0  True Az=135.915  Ze=-6.495  Az status=0009  Ze status=0008
04:01:18 Check angles
04:01:18 SkyScan query
04:01:18 SkyScan query done: ret=0  az=153.87<-10258  ze=-6.48<-12432  Statuses=0009 0008
04:01:18 Msec=750  True Az=153.87  Ze=-6.48  Az status=0009  Ze status=0008
04:01:18 Check angles
04:01:18 SkyScan query
04:01:19 SkyScan query done: ret=0  az=171.27<-11418  ze=-6.48<-12432  Statuses=0009 0008
04:01:19 Msec=1500  True Az=171.27  Ze=-6.48  Az status=0009  Ze status=0008
04:01:19 Check angles
04:01:19 SkyScan query
04:01:20 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:01:20 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:01:20 Message to Master queued w/err=0: serial=181011 error=0
04:01:25 Received message from Master: op=Filter serial=181012
04:01:25 Color wheel filter change from 0 to 0
04:01:25 FLIGetFilterPos err=0  currentPosition=0
04:01:25 FLIGetStepsRemaining err=0  RemainingSteps=0
04:01:25 Filter is already there-color wheel unchanged
04:01:25 Received message from Master: op=Shutter serial=181013
04:01:25 Shutter LASER close
04:01:25 Received message from Camera: op=State serial=181015
04:01:25 GetSingleValue result=40  Value=cccccccc
04:01:25 SkyScan query
04:01:25 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:01:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:01:25 Parameters OK
04:01:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:01:25 Set A/D data flow result=40
04:01:25 Set A/D channel type result=40
04:01:25 Set A/D encoding result=40
04:01:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:01:25 Set channel filter=0.000000e+000  result=40
04:01:25 Config A/D  Result=40
04:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:01:25 Get A/D filter: -9.255963e+061  result=40
04:01:25 Get A/D value=-858993460  result=40
04:01:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:01:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:01:25 Parameters OK
04:01:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:01:25 Set A/D data flow result=40
04:01:25 Set A/D channel type result=40
04:01:25 Set A/D encoding result=40
04:01:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:01:25 Set channel filter=0.000000e+000  result=40
04:01:25 Config A/D  Result=40
04:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:01:25 Get A/D filter: -9.255963e+061  result=40
04:01:25 Get A/D value=-858993460  result=40
04:01:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:01:25 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:01:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:01:25 Aux=
04:01:25 Message to Camera, serial 181015 queued
04:02:01 Received message from Master: op=PointingHead serial=181027
04:02:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:02:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:02:02 Point started: ret=0
04:02:02 point_skyscan result=0
04:02:03 Check angles
04:02:03 SkyScan query
04:02:03 SkyScan query done: ret=0  az=152.565<-10171  ze=6.51<-11566  Statuses=0009 0008
04:02:03 Msec=0  True Az=152.565  Ze=6.51  Az status=0009  Ze status=0008
04:02:03 Check angles
04:02:03 SkyScan query
04:02:04 SkyScan query done: ret=0  az=134.64<-8976  ze=6.495<-11567  Statuses=0009 0008
04:02:04 Msec=750  True Az=134.64  Ze=6.495  Az status=0009  Ze status=0008
04:02:04 Check angles
04:02:04 SkyScan query
04:02:05 SkyScan query done: ret=0  az=117.27<-7818  ze=6.495<-11567  Statuses=0009 0008
04:02:05 Msec=1500  True Az=117.27  Ze=6.495  Az status=0009  Ze status=0008
04:02:05 Check angles
04:02:05 SkyScan query
04:02:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:02:05 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:02:05 Message to Master queued w/err=0: serial=181027 error=0
04:02:10 Received message from Master: op=Filter serial=181028
04:02:10 Color wheel filter change from 0 to 0
04:02:10 FLIGetFilterPos err=0  currentPosition=0
04:02:10 FLIGetStepsRemaining err=0  RemainingSteps=0
04:02:10 Filter is already there-color wheel unchanged
04:02:11 Received message from Master: op=Shutter serial=181029
04:02:11 Shutter LASER close
04:02:11 Received message from Camera: op=State serial=181031
04:02:11 GetSingleValue result=40  Value=cccccccc
04:02:11 SkyScan query
04:02:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:02:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:02:11 Parameters OK
04:02:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:02:11 Set A/D data flow result=40
04:02:11 Set A/D channel type result=40
04:02:11 Set A/D encoding result=40
04:02:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:02:11 Set channel filter=0.000000e+000  result=40
04:02:11 Config A/D  Result=40
04:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:02:11 Get A/D filter: -9.255963e+061  result=40
04:02:11 Get A/D value=-858993460  result=40
04:02:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:02:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:02:11 Parameters OK
04:02:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:02:11 Set A/D data flow result=40
04:02:11 Set A/D channel type result=40
04:02:11 Set A/D encoding result=40
04:02:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:02:11 Set channel filter=0.000000e+000  result=40
04:02:11 Config A/D  Result=40
04:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:02:11 Get A/D filter: -9.255963e+061  result=40
04:02:11 Get A/D value=-858993460  result=40
04:02:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:02:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:02:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:02:11 Aux=
04:02:11 Message to Camera, serial 181031 queued
04:02:48 Received message from Master: op=PointingHead serial=181044
04:02:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:02:48 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:02:48 Point started: ret=0
04:02:48 point_skyscan result=0
04:02:49 Check angles
04:02:49 SkyScan query
04:02:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
04:02:50 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
04:02:50 Check angles
04:02:50 SkyScan query
04:02:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
04:02:50 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
04:02:51 Check angles
04:02:51 SkyScan query
04:02:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
04:02:51 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
04:02:51 Check angles
04:02:51 SkyScan query
04:02:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.88<-17792  Statuses=0008 0009
04:02:52 Msec=2250  True Az=112.995  Ze=-86.88  Az status=0008  Ze status=0009
04:02:52 Check angles
04:02:52 SkyScan query
04:02:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.82<-19188  Statuses=0008 0009
04:02:53 Msec=3000  True Az=112.995  Ze=-107.82  Az status=0008  Ze status=0009
04:02:53 Check angles
04:02:53 SkyScan query
04:02:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.76<-20584  Statuses=0008 0009
04:02:53 Msec=3750  True Az=112.995  Ze=-128.76  Az status=0008  Ze status=0009
04:02:54 Check angles
04:02:54 SkyScan query
04:02:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.745<-21983  Statuses=0008 0009
04:02:54 Msec=4500  True Az=112.995  Ze=-149.745  Az status=0008  Ze status=0009
04:02:54 Check angles
04:02:54 SkyScan query
04:02:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.655<-23377  Statuses=0008 0009
04:02:55 Msec=5250  True Az=112.995  Ze=-170.655  Az status=0008  Ze status=0009
04:02:55 Check angles
04:02:55 SkyScan query
04:02:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:02:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:02:56 Message to Master queued w/err=0: serial=181044 error=0
04:03:01 Received message from Master: op=Filter serial=181045
04:03:01 Color wheel filter change from 0 to 0
04:03:01 FLIGetFilterPos err=0  currentPosition=0
04:03:01 FLIGetStepsRemaining err=0  RemainingSteps=0
04:03:01 Filter is already there-color wheel unchanged
04:03:01 Received message from Master: op=Shutter serial=181046
04:03:01 Shutter LASER open
04:03:01 Received message from Camera: op=State serial=181048
04:03:01 GetSingleValue result=40  Value=cccccccc
04:03:01 SkyScan query
04:03:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:03:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:03:02 Parameters OK
04:03:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:03:02 Set A/D data flow result=40
04:03:02 Set A/D channel type result=40
04:03:02 Set A/D encoding result=40
04:03:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:03:02 Set channel filter=0.000000e+000  result=40
04:03:02 Config A/D  Result=40
04:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:03:02 Get A/D filter: -9.255963e+061  result=40
04:03:02 Get A/D value=-858993460  result=40
04:03:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:03:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:03:02 Parameters OK
04:03:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:03:02 Set A/D data flow result=40
04:03:02 Set A/D channel type result=40
04:03:02 Set A/D encoding result=40
04:03:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:03:02 Set channel filter=0.000000e+000  result=40
04:03:02 Config A/D  Result=40
04:03:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:03:02 Get A/D filter: -9.255963e+061  result=40
04:03:02 Get A/D value=-858993460  result=40
04:03:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:03:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:03:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:03:02 Aux=
04:03:02 Message to Camera, serial 181048 queued
04:03:10 Received message from Master: op=Shutter serial=181058
04:03:10 Shutter LASER close
04:03:10 Received message from Master: op=PointingHead serial=181062
04:03:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:03:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:03:11 Point started: ret=0
04:03:11 point_skyscan result=0
04:03:12 Check angles
04:03:12 SkyScan query
04:03:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.205<-21547  Statuses=0008 0009
04:03:12 Msec=0  True Az=112.995  Ze=-143.205  Az status=0008  Ze status=0009
04:03:12 Check angles
04:03:12 SkyScan query
04:03:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
04:03:13 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
04:03:13 Check angles
04:03:13 SkyScan query
04:03:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
04:03:14 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
04:03:14 Check angles
04:03:14 SkyScan query
04:03:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.47<-17298  Statuses=0008 0009
04:03:14 Msec=2250  True Az=112.995  Ze=-79.47  Az status=0008  Ze status=0009
04:03:15 Check angles
04:03:15 SkyScan query
04:03:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.515<-15901  Statuses=0008 0009
04:03:15 Msec=3000  True Az=112.995  Ze=-58.515  Az status=0008  Ze status=0009
04:03:15 Check angles
04:03:15 SkyScan query
04:03:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.575<-14505  Statuses=0008 0009
04:03:16 Msec=3750  True Az=112.995  Ze=-37.575  Az status=0008  Ze status=0009
04:03:16 Check angles
04:03:16 SkyScan query
04:03:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.59<-13106  Statuses=0008 0009
04:03:17 Msec=4500  True Az=112.995  Ze=-16.59  Az status=0008  Ze status=0009
04:03:17 Check angles
04:03:17 SkyScan query
04:03:17 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
04:03:17 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
04:03:18 Check angles
04:03:18 SkyScan query
04:03:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:03:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:03:18 Message to Master queued w/err=0: serial=181062 error=0
04:03:23 Received message from Master: op=Filter serial=181063
04:03:23 Color wheel filter change from 0 to 0
04:03:23 FLIGetFilterPos err=0  currentPosition=0
04:03:23 FLIGetStepsRemaining err=0  RemainingSteps=0
04:03:23 Filter is already there-color wheel unchanged
04:03:23 Received message from Master: op=Shutter serial=181064
04:03:23 Shutter LASER close
04:03:23 Received message from Camera: op=State serial=181066
04:03:23 GetSingleValue result=40  Value=cccccccc
04:03:23 SkyScan query
04:03:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:03:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:03:24 Parameters OK
04:03:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:03:24 Set A/D data flow result=40
04:03:24 Set A/D channel type result=40
04:03:24 Set A/D encoding result=40
04:03:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:03:24 Set channel filter=0.000000e+000  result=40
04:03:24 Config A/D  Result=40
04:03:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:03:24 Get A/D filter: -9.255963e+061  result=40
04:03:24 Get A/D value=-858993460  result=40
04:03:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:03:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:03:24 Parameters OK
04:03:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:03:24 Set A/D data flow result=40
04:03:24 Set A/D channel type result=40
04:03:24 Set A/D encoding result=40
04:03:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:03:24 Set channel filter=0.000000e+000  result=40
04:03:24 Config A/D  Result=40
04:03:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:03:24 Get A/D filter: -9.255963e+061  result=40
04:03:24 Get A/D value=-858993460  result=40
04:03:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:03:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:03:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:03:24 Aux=
04:03:24 Message to Camera, serial 181066 queued
04:03:36 Received message from Master: op=Identify serial=181067
[UTC 2019-3-9  04:03:48]
04:04:01 Received message from Master: op=PointingHead serial=181082
04:04:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:04:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:04:01 Point started: ret=0
04:04:01 point_skyscan result=0
04:04:02 Check angles
04:04:02 SkyScan query
04:04:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:04:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:04:03 Message to Master queued w/err=0: serial=181082 error=0
04:04:08 Received message from Master: op=Filter serial=181083
04:04:08 Color wheel filter change from 0 to 0
04:04:08 FLIGetFilterPos err=0  currentPosition=0
04:04:08 FLIGetStepsRemaining err=0  RemainingSteps=0
04:04:08 Filter is already there-color wheel unchanged
04:04:08 Received message from Master: op=Shutter serial=181084
04:04:08 Shutter LASER close
04:04:08 Received message from Camera: op=State serial=181086
04:04:08 GetSingleValue result=40  Value=cccccccc
04:04:08 SkyScan query
04:04:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:04:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:04:08 Parameters OK
04:04:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:04:08 Set A/D data flow result=40
04:04:08 Set A/D channel type result=40
04:04:08 Set A/D encoding result=40
04:04:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:04:08 Set channel filter=0.000000e+000  result=40
04:04:08 Config A/D  Result=40
04:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:04:08 Get A/D filter: -9.255963e+061  result=40
04:04:08 Get A/D value=-858993460  result=40
04:04:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:04:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:04:08 Parameters OK
04:04:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:04:08 Set A/D data flow result=40
04:04:08 Set A/D channel type result=40
04:04:08 Set A/D encoding result=40
04:04:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:04:08 Set channel filter=0.000000e+000  result=40
04:04:08 Config A/D  Result=40
04:04:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:04:08 Get A/D filter: -9.255963e+061  result=40
04:04:08 Get A/D value=-858993460  result=40
04:04:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:04:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:04:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:04:08 Aux=
04:04:08 Message to Camera, serial 181086 queued
04:04:45 Received message from Master: op=PointingHead serial=181099
04:04:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:04:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:04:46 Point started: ret=0
04:04:46 point_skyscan result=0
04:04:46 Check angles
04:04:46 SkyScan query
04:04:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:04:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:04:47 Message to Master queued w/err=0: serial=181099 error=0
04:04:52 Received message from Master: op=Filter serial=181100
04:04:52 Color wheel filter change from 0 to 0
04:04:52 FLIGetFilterPos err=0  currentPosition=0
04:04:52 FLIGetStepsRemaining err=0  RemainingSteps=0
04:04:52 Filter is already there-color wheel unchanged
04:04:52 Received message from Master: op=Shutter serial=181101
04:04:52 Shutter LASER close
04:04:52 Received message from Camera: op=State serial=181103
04:04:52 GetSingleValue result=40  Value=cccccccc
04:04:52 SkyScan query
04:04:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:04:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:04:53 Parameters OK
04:04:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:04:53 Set A/D data flow result=40
04:04:53 Set A/D channel type result=40
04:04:53 Set A/D encoding result=40
04:04:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:04:53 Set channel filter=0.000000e+000  result=40
04:04:53 Config A/D  Result=40
04:04:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:04:53 Get A/D filter: -9.255963e+061  result=40
04:04:53 Get A/D value=-858993460  result=40
04:04:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:04:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:04:53 Parameters OK
04:04:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:04:53 Set A/D data flow result=40
04:04:53 Set A/D channel type result=40
04:04:53 Set A/D encoding result=40
04:04:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:04:53 Set channel filter=0.000000e+000  result=40
04:04:53 Config A/D  Result=40
04:04:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:04:53 Get A/D filter: -9.255963e+061  result=40
04:04:53 Get A/D value=-858993460  result=40
04:04:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:04:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:04:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:04:53 Aux=
04:04:53 Message to Camera, serial 181103 queued
04:05:30 Received message from Master: op=PointingHead serial=181116
04:05:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:05:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:05:30 Point started: ret=0
04:05:30 point_skyscan result=0
04:05:31 Check angles
04:05:31 SkyScan query
04:05:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:05:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:05:31 Message to Master queued w/err=0: serial=181116 error=0
04:05:36 Received message from Master: op=Filter serial=181117
04:05:36 Color wheel filter change from 0 to 0
04:05:36 FLIGetFilterPos err=0  currentPosition=0
04:05:36 FLIGetStepsRemaining err=0  RemainingSteps=0
04:05:36 Filter is already there-color wheel unchanged
04:05:36 Received message from Master: op=Shutter serial=181118
04:05:36 Shutter LASER close
04:05:36 Received message from Camera: op=State serial=181120
04:05:36 GetSingleValue result=40  Value=cccccccc
04:05:36 SkyScan query
04:05:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:05:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:05:37 Parameters OK
04:05:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:05:37 Set A/D data flow result=40
04:05:37 Set A/D channel type result=40
04:05:37 Set A/D encoding result=40
04:05:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:05:37 Set channel filter=0.000000e+000  result=40
04:05:37 Config A/D  Result=40
04:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:05:37 Get A/D filter: -9.255963e+061  result=40
04:05:37 Get A/D value=-858993460  result=40
04:05:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:05:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:05:37 Parameters OK
04:05:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:05:37 Set A/D data flow result=40
04:05:37 Set A/D channel type result=40
04:05:37 Set A/D encoding result=40
04:05:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:05:37 Set channel filter=0.000000e+000  result=40
04:05:37 Config A/D  Result=40
04:05:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:05:37 Get A/D filter: -9.255963e+061  result=40
04:05:37 Get A/D value=-858993460  result=40
04:05:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:05:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:05:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:05:37 Aux=
04:05:37 Message to Camera, serial 181120 queued
04:06:14 Received message from Master: op=PointingHead serial=181133
04:06:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:06:14 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:06:14 Point started: ret=0
04:06:14 point_skyscan result=0
04:06:15 Check angles
04:06:15 SkyScan query
04:06:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
04:06:15 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
04:06:16 Check angles
04:06:16 SkyScan query
04:06:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.1<-14940  Statuses=0008 0009
04:06:16 Msec=750  True Az=112.995  Ze=-44.1  Az status=0008  Ze status=0009
04:06:16 Check angles
04:06:16 SkyScan query
04:06:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.475<-16365  Statuses=0008 0009
04:06:17 Msec=1500  True Az=112.995  Ze=-65.475  Az status=0008  Ze status=0009
04:06:17 Check angles
04:06:17 SkyScan query
04:06:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.43<-17762  Statuses=0008 0009
04:06:18 Msec=2250  True Az=112.995  Ze=-86.43  Az status=0008  Ze status=0009
04:06:18 Check angles
04:06:18 SkyScan query
04:06:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
04:06:18 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
04:06:19 Check angles
04:06:19 SkyScan query
04:06:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.76<-20584  Statuses=0008 0009
04:06:19 Msec=3750  True Az=112.995  Ze=-128.76  Az status=0008  Ze status=0009
04:06:19 Check angles
04:06:19 SkyScan query
04:06:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.165<-22011  Statuses=0008 0009
04:06:20 Msec=4500  True Az=112.995  Ze=-150.165  Az status=0008  Ze status=0009
04:06:20 Check angles
04:06:20 SkyScan query
04:06:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-171<-23400  Statuses=0008 0009
04:06:21 Msec=5250  True Az=112.995  Ze=-171  Az status=0008  Ze status=0009
04:06:21 Check angles
04:06:21 SkyScan query
04:06:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:06:22 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:06:22 Message to Master queued w/err=0: serial=181133 error=0
04:06:27 Received message from Master: op=Filter serial=181134
04:06:27 Color wheel filter change from 0 to 0
04:06:27 FLIGetFilterPos err=0  currentPosition=0
04:06:27 FLIGetStepsRemaining err=0  RemainingSteps=0
04:06:27 Filter is already there-color wheel unchanged
04:06:27 Received message from Master: op=Shutter serial=181135
04:06:27 Shutter LASER open
04:06:27 Received message from Camera: op=State serial=181137
04:06:27 GetSingleValue result=40  Value=cccccccc
04:06:27 SkyScan query
04:06:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:06:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:06:27 Parameters OK
04:06:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:06:27 Set A/D data flow result=40
04:06:27 Set A/D channel type result=40
04:06:27 Set A/D encoding result=40
04:06:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:06:27 Set channel filter=0.000000e+000  result=40
04:06:27 Config A/D  Result=40
04:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:06:27 Get A/D filter: -9.255963e+061  result=40
04:06:27 Get A/D value=-858993460  result=40
04:06:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:06:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:06:27 Parameters OK
04:06:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:06:27 Set A/D data flow result=40
04:06:27 Set A/D channel type result=40
04:06:27 Set A/D encoding result=40
04:06:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:06:27 Set channel filter=0.000000e+000  result=40
04:06:27 Config A/D  Result=40
04:06:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:06:27 Get A/D filter: -9.255963e+061  result=40
04:06:27 Get A/D value=-858993460  result=40
04:06:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:06:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:06:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:06:27 Aux=
04:06:27 Message to Camera, serial 181137 queued
04:06:35 Received message from Master: op=Shutter serial=181146
04:06:35 Shutter LASER close
04:06:36 Received message from Master: op=PointingHead serial=181150
04:06:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:06:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:06:36 Point started: ret=0
04:06:36 point_skyscan result=0
04:06:37 Check angles
04:06:37 SkyScan query
04:06:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.875<-21525  Statuses=0008 0009
04:06:37 Msec=0  True Az=112.995  Ze=-142.875  Az status=0008  Ze status=0009
04:06:37 Check angles
04:06:37 SkyScan query
04:06:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.89<-20126  Statuses=0008 0009
04:06:38 Msec=750  True Az=112.995  Ze=-121.89  Az status=0008  Ze status=0009
04:06:38 Check angles
04:06:38 SkyScan query
04:06:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.98<-18732  Statuses=0008 0009
04:06:39 Msec=1500  True Az=112.995  Ze=-100.98  Az status=0008  Ze status=0009
04:06:39 Check angles
04:06:39 SkyScan query
04:06:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.01<-17334  Statuses=0008 0009
04:06:40 Msec=2250  True Az=112.995  Ze=-80.01  Az status=0008  Ze status=0009
04:06:40 Check angles
04:06:40 SkyScan query
04:06:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.085<-15939  Statuses=0008 0009
04:06:40 Msec=3000  True Az=112.995  Ze=-59.085  Az status=0008  Ze status=0009
04:06:40 Check angles
04:06:40 SkyScan query
04:06:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.07<-14538  Statuses=0008 0009
04:06:41 Msec=3750  True Az=112.995  Ze=-38.07  Az status=0008  Ze status=0009
04:06:41 Check angles
04:06:41 SkyScan query
04:06:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.145<-13143  Statuses=0008 0009
04:06:42 Msec=4500  True Az=112.995  Ze=-17.145  Az status=0008  Ze status=0009
04:06:42 Check angles
04:06:42 SkyScan query
04:06:43 SkyScan query done: ret=0  az=112.995<-7533  ze=4.215<-11719  Statuses=0008 0009
04:06:43 Msec=5250  True Az=112.995  Ze=4.215  Az status=0008  Ze status=0009
04:06:43 Check angles
04:06:43 SkyScan query
04:06:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:06:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:06:43 Message to Master queued w/err=0: serial=181150 error=0
04:06:48 Received message from Master: op=Filter serial=181151
04:06:48 Color wheel filter change from 0 to 0
04:06:48 FLIGetFilterPos err=0  currentPosition=0
04:06:48 FLIGetStepsRemaining err=0  RemainingSteps=0
04:06:48 Filter is already there-color wheel unchanged
04:06:48 Received message from Master: op=Shutter serial=181152
04:06:48 Shutter LASER close
04:06:49 Received message from Camera: op=State serial=181154
04:06:49 GetSingleValue result=40  Value=cccccccc
04:06:49 SkyScan query
04:06:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:06:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:06:49 Parameters OK
04:06:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:06:49 Set A/D data flow result=40
04:06:49 Set A/D channel type result=40
04:06:49 Set A/D encoding result=40
04:06:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:06:49 Set channel filter=0.000000e+000  result=40
04:06:49 Config A/D  Result=40
04:06:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:06:49 Get A/D filter: -9.255963e+061  result=40
04:06:49 Get A/D value=-858993460  result=40
04:06:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:06:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:06:49 Parameters OK
04:06:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:06:49 Set A/D data flow result=40
04:06:49 Set A/D channel type result=40
04:06:49 Set A/D encoding result=40
04:06:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:06:49 Set channel filter=0.000000e+000  result=40
04:06:49 Config A/D  Result=40
04:06:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:06:49 Get A/D filter: -9.255963e+061  result=40
04:06:49 Get A/D value=-858993460  result=40
04:06:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:06:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:06:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:06:49 Aux=
04:06:49 Message to Camera, serial 181154 queued
04:07:25 Received message from Master: op=PointingHead serial=181166
04:07:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:07:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:07:25 Point started: ret=0
04:07:25 point_skyscan result=0
04:07:26 Check angles
04:07:26 SkyScan query
04:07:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:07:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:07:27 Message to Master queued w/err=0: serial=181166 error=0
04:07:32 Received message from Master: op=Filter serial=181167
04:07:32 Color wheel filter change from 0 to 0
04:07:32 FLIGetFilterPos err=0  currentPosition=0
04:07:32 FLIGetStepsRemaining err=0  RemainingSteps=0
04:07:32 Filter is already there-color wheel unchanged
04:07:32 Received message from Master: op=Shutter serial=181168
04:07:32 Shutter LASER close
04:07:32 Received message from Camera: op=State serial=181170
04:07:32 GetSingleValue result=40  Value=cccccccc
04:07:32 SkyScan query
04:07:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:07:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:07:33 Parameters OK
04:07:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:07:33 Set A/D data flow result=40
04:07:33 Set A/D channel type result=40
04:07:33 Set A/D encoding result=40
04:07:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:07:33 Set channel filter=0.000000e+000  result=40
04:07:33 Config A/D  Result=40
04:07:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:07:33 Get A/D filter: -9.255963e+061  result=40
04:07:33 Get A/D value=-858993460  result=40
04:07:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:07:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:07:33 Parameters OK
04:07:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:07:33 Set A/D data flow result=40
04:07:33 Set A/D channel type result=40
04:07:33 Set A/D encoding result=40
04:07:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:07:33 Set channel filter=0.000000e+000  result=40
04:07:33 Config A/D  Result=40
04:07:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:07:33 Get A/D filter: -9.255963e+061  result=40
04:07:33 Get A/D value=-858993460  result=40
04:07:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:07:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:07:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:07:33 Aux=
04:07:33 Message to Camera, serial 181170 queued
04:08:09 Received message from Master: op=PointingHead serial=181183
04:08:09 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:08:09 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:08:10 Point started: ret=0
04:08:10 point_skyscan result=0
04:08:10 Check angles
04:08:10 SkyScan query
04:08:11 SkyScan query done: ret=0  az=135.78<-9052  ze=-6.495<-12433  Statuses=0009 0008
04:08:11 Msec=0  True Az=135.78  Ze=-6.495  Az status=0009  Ze status=0008
04:08:11 Check angles
04:08:11 SkyScan query
04:08:12 SkyScan query done: ret=0  az=153.27<-10218  ze=-6.48<-12432  Statuses=0009 0008
04:08:12 Msec=750  True Az=153.27  Ze=-6.48  Az status=0009  Ze status=0008
04:08:12 Check angles
04:08:12 SkyScan query
04:08:13 SkyScan query done: ret=0  az=170.7<-11380  ze=-6.48<-12432  Statuses=0009 0008
04:08:13 Msec=1500  True Az=170.7  Ze=-6.48  Az status=0009  Ze status=0008
04:08:13 Check angles
04:08:13 SkyScan query
04:08:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:08:13 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:08:13 Message to Master queued w/err=0: serial=181183 error=0
04:08:18 Received message from Master: op=Filter serial=181184
04:08:18 Color wheel filter change from 0 to 0
04:08:18 FLIGetFilterPos err=0  currentPosition=0
04:08:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:08:18 Filter is already there-color wheel unchanged
04:08:18 Received message from Master: op=Shutter serial=181185
04:08:18 Shutter LASER close
04:08:19 Received message from Camera: op=State serial=181187
04:08:19 GetSingleValue result=40  Value=cccccccc
04:08:19 SkyScan query
04:08:19 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:08:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:08:19 Parameters OK
04:08:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:08:19 Set A/D data flow result=40
04:08:19 Set A/D channel type result=40
04:08:19 Set A/D encoding result=40
04:08:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:08:19 Set channel filter=0.000000e+000  result=40
04:08:19 Config A/D  Result=40
04:08:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:08:19 Get A/D filter: -9.255963e+061  result=40
04:08:19 Get A/D value=-858993460  result=40
04:08:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:08:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:08:19 Parameters OK
04:08:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:08:19 Set A/D data flow result=40
04:08:19 Set A/D channel type result=40
04:08:19 Set A/D encoding result=40
04:08:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:08:19 Set channel filter=0.000000e+000  result=40
04:08:19 Config A/D  Result=40
04:08:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:08:19 Get A/D filter: -9.255963e+061  result=40
04:08:19 Get A/D value=-858993460  result=40
04:08:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:08:19 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:08:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:08:19 Aux=
04:08:19 Message to Camera, serial 181187 queued
04:08:56 Received message from Master: op=PointingHead serial=181200
04:08:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:08:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:08:56 Point started: ret=0
04:08:56 point_skyscan result=0
04:08:57 Check angles
04:08:57 SkyScan query
04:08:58 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
04:08:58 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
04:08:58 Check angles
04:08:58 SkyScan query
04:08:58 SkyScan query done: ret=0  az=135.015<-9001  ze=6.495<-11567  Statuses=0009 0008
04:08:58 Msec=750  True Az=135.015  Ze=6.495  Az status=0009  Ze status=0008
04:08:59 Check angles
04:08:59 SkyScan query
04:08:59 SkyScan query done: ret=0  az=117.525<-7835  ze=6.495<-11567  Statuses=0009 0008
04:08:59 Msec=1500  True Az=117.525  Ze=6.495  Az status=0009  Ze status=0008
04:08:59 Check angles
04:08:59 SkyScan query
04:09:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:09:00 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:09:00 Message to Master queued w/err=0: serial=181200 error=0
04:09:05 Received message from Master: op=Filter serial=181201
04:09:05 Color wheel filter change from 0 to 0
04:09:05 FLIGetFilterPos err=0  currentPosition=0
04:09:05 FLIGetStepsRemaining err=0  RemainingSteps=0
04:09:05 Filter is already there-color wheel unchanged
04:09:05 Received message from Master: op=Shutter serial=181202
04:09:05 Shutter LASER close
04:09:05 Received message from Camera: op=State serial=181204
04:09:05 GetSingleValue result=40  Value=cccccccc
04:09:05 SkyScan query
04:09:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:09:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:06 Parameters OK
04:09:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:06 Set A/D data flow result=40
04:09:06 Set A/D channel type result=40
04:09:06 Set A/D encoding result=40
04:09:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:06 Set channel filter=0.000000e+000  result=40
04:09:06 Config A/D  Result=40
04:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:06 Get A/D filter: -9.255963e+061  result=40
04:09:06 Get A/D value=-858993460  result=40
04:09:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:06 Parameters OK
04:09:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:06 Set A/D data flow result=40
04:09:06 Set A/D channel type result=40
04:09:06 Set A/D encoding result=40
04:09:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:06 Set channel filter=0.000000e+000  result=40
04:09:06 Config A/D  Result=40
04:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:06 Get A/D filter: -9.255963e+061  result=40
04:09:06 Get A/D value=-858993460  result=40
04:09:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:09:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:09:06 Aux=
04:09:06 Message to Camera, serial 181204 queued
04:09:42 Received message from Master: op=PointingHead serial=181217
04:09:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:09:42 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:09:43 Point started: ret=0
04:09:43 point_skyscan result=0
04:09:44 Check angles
04:09:44 SkyScan query
04:09:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.67<-13578  Statuses=0008 0009
04:09:44 Msec=0  True Az=112.995  Ze=-23.67  Az status=0008  Ze status=0009
04:09:44 Check angles
04:09:44 SkyScan query
04:09:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.64<-14976  Statuses=0008 0009
04:09:45 Msec=750  True Az=112.995  Ze=-44.64  Az status=0008  Ze status=0009
04:09:45 Check angles
04:09:45 SkyScan query
04:09:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.58<-16372  Statuses=0008 0009
04:09:46 Msec=1500  True Az=112.995  Ze=-65.58  Az status=0008  Ze status=0009
04:09:46 Check angles
04:09:46 SkyScan query
04:09:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.565<-17771  Statuses=0008 0009
04:09:46 Msec=2250  True Az=112.995  Ze=-86.565  Az status=0008  Ze status=0009
04:09:47 Check angles
04:09:47 SkyScan query
04:09:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.505<-19167  Statuses=0008 0009
04:09:47 Msec=3000  True Az=112.995  Ze=-107.505  Az status=0008  Ze status=0009
04:09:47 Check angles
04:09:47 SkyScan query
04:09:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.445<-20563  Statuses=0008 0009
04:09:48 Msec=3750  True Az=112.995  Ze=-128.445  Az status=0008  Ze status=0009
04:09:48 Check angles
04:09:48 SkyScan query
04:09:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.4<-21960  Statuses=0008 0009
04:09:49 Msec=4500  True Az=112.995  Ze=-149.4  Az status=0008  Ze status=0009
04:09:49 Check angles
04:09:49 SkyScan query
04:09:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.34<-23356  Statuses=0008 0009
04:09:49 Msec=5250  True Az=112.995  Ze=-170.34  Az status=0008  Ze status=0009
04:09:50 Check angles
04:09:50 SkyScan query
04:09:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:09:50 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:09:50 Message to Master queued w/err=0: serial=181217 error=0
04:09:55 Received message from Master: op=Filter serial=181218
04:09:55 Color wheel filter change from 0 to 0
04:09:55 FLIGetFilterPos err=0  currentPosition=0
04:09:55 FLIGetStepsRemaining err=0  RemainingSteps=0
04:09:55 Filter is already there-color wheel unchanged
04:09:55 Received message from Master: op=Shutter serial=181219
04:09:55 Shutter LASER open
04:09:56 Received message from Camera: op=State serial=181221
04:09:56 GetSingleValue result=40  Value=cccccccc
04:09:56 SkyScan query
04:09:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:09:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:56 Parameters OK
04:09:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:56 Set A/D data flow result=40
04:09:56 Set A/D channel type result=40
04:09:56 Set A/D encoding result=40
04:09:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:56 Set channel filter=0.000000e+000  result=40
04:09:56 Config A/D  Result=40
04:09:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:56 Get A/D filter: -9.255963e+061  result=40
04:09:56 Get A/D value=-858993460  result=40
04:09:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:09:56 Parameters OK
04:09:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:09:56 Set A/D data flow result=40
04:09:56 Set A/D channel type result=40
04:09:56 Set A/D encoding result=40
04:09:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:09:56 Set channel filter=0.000000e+000  result=40
04:09:56 Config A/D  Result=40
04:09:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:09:56 Get A/D filter: -9.255963e+061  result=40
04:09:56 Get A/D value=-858993460  result=40
04:09:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:09:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:09:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:09:56 Aux=
04:09:56 Message to Camera, serial 181221 queued
04:10:05 Received message from Master: op=Shutter serial=181231
04:10:05 Shutter LASER close
04:10:05 Received message from Master: op=PointingHead serial=181235
04:10:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:10:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:10:05 Point started: ret=0
04:10:05 point_skyscan result=0
04:10:06 Check angles
04:10:06 SkyScan query
04:10:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.785<-21519  Statuses=0008 0009
04:10:07 Msec=0  True Az=112.995  Ze=-142.785  Az status=0008  Ze status=0009
04:10:07 Check angles
04:10:07 SkyScan query
04:10:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.815<-20121  Statuses=0008 0009
04:10:07 Msec=750  True Az=112.995  Ze=-121.815  Az status=0008  Ze status=0009
04:10:08 Check angles
04:10:08 SkyScan query
04:10:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.89<-18726  Statuses=0008 0009
04:10:08 Msec=1500  True Az=112.995  Ze=-100.89  Az status=0008  Ze status=0009
04:10:08 Check angles
04:10:08 SkyScan query
04:10:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.935<-17329  Statuses=0008 0009
04:10:09 Msec=2250  True Az=112.995  Ze=-79.935  Az status=0008  Ze status=0009
04:10:09 Check angles
04:10:09 SkyScan query
04:10:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.995<-15933  Statuses=0008 0009
04:10:10 Msec=3000  True Az=112.995  Ze=-58.995  Az status=0008  Ze status=0009
04:10:10 Check angles
04:10:10 SkyScan query
04:10:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.01<-14534  Statuses=0008 0009
04:10:10 Msec=3750  True Az=112.995  Ze=-38.01  Az status=0008  Ze status=0009
04:10:11 Check angles
04:10:11 SkyScan query
04:10:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.055<-13137  Statuses=0008 0009
04:10:11 Msec=4500  True Az=112.995  Ze=-17.055  Az status=0008  Ze status=0009
04:10:11 Check angles
04:10:11 SkyScan query
04:10:12 SkyScan query done: ret=0  az=112.995<-7533  ze=3.9<-11740  Statuses=0008 0009
04:10:12 Msec=5250  True Az=112.995  Ze=3.9  Az status=0008  Ze status=0009
04:10:12 Check angles
04:10:12 SkyScan query
04:10:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:10:13 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:10:13 Message to Master queued w/err=0: serial=181235 error=0
04:10:18 Received message from Master: op=Filter serial=181236
04:10:18 Color wheel filter change from 0 to 0
04:10:18 FLIGetFilterPos err=0  currentPosition=0
04:10:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:10:18 Filter is already there-color wheel unchanged
04:10:18 Received message from Master: op=Shutter serial=181237
04:10:18 Shutter LASER close
04:10:18 Received message from Camera: op=State serial=181239
04:10:18 GetSingleValue result=40  Value=cccccccc
04:10:18 SkyScan query
04:10:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:10:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:19 Parameters OK
04:10:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:19 Set A/D data flow result=40
04:10:19 Set A/D channel type result=40
04:10:19 Set A/D encoding result=40
04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:19 Set channel filter=0.000000e+000  result=40
04:10:19 Config A/D  Result=40
04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:19 Get A/D filter: -9.255963e+061  result=40
04:10:19 Get A/D value=-858993460  result=40
04:10:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:10:19 Parameters OK
04:10:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:10:19 Set A/D data flow result=40
04:10:19 Set A/D channel type result=40
04:10:19 Set A/D encoding result=40
04:10:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:10:19 Set channel filter=0.000000e+000  result=40
04:10:19 Config A/D  Result=40
04:10:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:10:19 Get A/D filter: -9.255963e+061  result=40
04:10:19 Get A/D value=-858993460  result=40
04:10:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:10:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:10:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:10:19 Aux=
04:10:19 Message to Camera, serial 181239 queued
04:10:56 Received message from Master: op=PointingHead serial=181252
04:10:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:10:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:10:56 Point started: ret=0
04:10:56 point_skyscan result=0
04:10:57 Check angles
04:10:57 SkyScan query
04:10:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:10:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:10:57 Message to Master queued w/err=0: serial=181252 error=0
04:11:02 Received message from Master: op=Filter serial=181253
04:11:02 Color wheel filter change from 0 to 0
04:11:02 FLIGetFilterPos err=0  currentPosition=0
04:11:02 FLIGetStepsRemaining err=0  RemainingSteps=0
04:11:02 Filter is already there-color wheel unchanged
04:11:02 Received message from Master: op=Shutter serial=181254
04:11:02 Shutter LASER close
04:11:02 Received message from Camera: op=State serial=181256
04:11:02 GetSingleValue result=40  Value=cccccccc
04:11:02 SkyScan query
04:11:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:11:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:11:03 Parameters OK
04:11:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:11:03 Set A/D data flow result=40
04:11:03 Set A/D channel type result=40
04:11:03 Set A/D encoding result=40
04:11:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:11:03 Set channel filter=0.000000e+000  result=40
04:11:03 Config A/D  Result=40
04:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:11:03 Get A/D filter: -9.255963e+061  result=40
04:11:03 Get A/D value=-858993460  result=40
04:11:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:11:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:11:03 Parameters OK
04:11:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:11:03 Set A/D data flow result=40
04:11:03 Set A/D channel type result=40
04:11:03 Set A/D encoding result=40
04:11:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:11:03 Set channel filter=0.000000e+000  result=40
04:11:03 Config A/D  Result=40
04:11:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:11:03 Get A/D filter: -9.255963e+061  result=40
04:11:03 Get A/D value=-858993460  result=40
04:11:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:11:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:11:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:11:03 Aux=
04:11:03 Message to Camera, serial 181256 queued
04:11:40 Received message from Master: op=PointingHead serial=181269
04:11:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:11:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:11:40 Point started: ret=0
04:11:40 point_skyscan result=0
04:11:41 Check angles
04:11:41 SkyScan query
04:11:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:11:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:11:41 Message to Master queued w/err=0: serial=181269 error=0
04:11:46 Received message from Master: op=Filter serial=181270
04:11:46 Color wheel filter change from 0 to 0
04:11:46 FLIGetFilterPos err=0  currentPosition=0
04:11:46 FLIGetStepsRemaining err=0  RemainingSteps=0
04:11:46 Filter is already there-color wheel unchanged
04:11:47 Received message from Master: op=Shutter serial=181271
04:11:47 Shutter LASER close
04:11:47 Received message from Camera: op=State serial=181273
04:11:47 GetSingleValue result=40  Value=cccccccc
04:11:47 SkyScan query
04:11:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:11:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:11:47 Parameters OK
04:11:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:11:47 Set A/D data flow result=40
04:11:47 Set A/D channel type result=40
04:11:47 Set A/D encoding result=40
04:11:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:11:47 Set channel filter=0.000000e+000  result=40
04:11:47 Config A/D  Result=40
04:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:11:47 Get A/D filter: -9.255963e+061  result=40
04:11:47 Get A/D value=-858993460  result=40
04:11:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:11:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:11:47 Parameters OK
04:11:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:11:47 Set A/D data flow result=40
04:11:47 Set A/D channel type result=40
04:11:47 Set A/D encoding result=40
04:11:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:11:47 Set channel filter=0.000000e+000  result=40
04:11:47 Config A/D  Result=40
04:11:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:11:47 Get A/D filter: -9.255963e+061  result=40
04:11:47 Get A/D value=-858993460  result=40
04:11:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:11:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:11:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:11:47 Aux=
04:11:47 Message to Camera, serial 181273 queued
04:12:24 Received message from Master: op=PointingHead serial=181286
04:12:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:12:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:12:24 Point started: ret=0
04:12:24 point_skyscan result=0
04:12:25 Check angles
04:12:25 SkyScan query
04:12:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:12:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:12:26 Message to Master queued w/err=0: serial=181286 error=0
04:12:31 Received message from Master: op=Filter serial=181287
04:12:31 Color wheel filter change from 0 to 0
04:12:31 FLIGetFilterPos err=0  currentPosition=0
04:12:31 FLIGetStepsRemaining err=0  RemainingSteps=0
04:12:31 Filter is already there-color wheel unchanged
04:12:31 Received message from Master: op=Shutter serial=181288
04:12:31 Shutter LASER close
04:12:31 Received message from Camera: op=State serial=181290
04:12:31 GetSingleValue result=40  Value=cccccccc
04:12:31 SkyScan query
04:12:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:12:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:12:32 Parameters OK
04:12:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:12:32 Set A/D data flow result=40
04:12:32 Set A/D channel type result=40
04:12:32 Set A/D encoding result=40
04:12:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:12:32 Set channel filter=0.000000e+000  result=40
04:12:32 Config A/D  Result=40
04:12:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:12:32 Get A/D filter: -9.255963e+061  result=40
04:12:32 Get A/D value=-858993460  result=40
04:12:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:12:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:12:32 Parameters OK
04:12:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:12:32 Set A/D data flow result=40
04:12:32 Set A/D channel type result=40
04:12:32 Set A/D encoding result=40
04:12:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:12:32 Set channel filter=0.000000e+000  result=40
04:12:32 Config A/D  Result=40
04:12:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:12:32 Get A/D filter: -9.255963e+061  result=40
04:12:32 Get A/D value=-858993460  result=40
04:12:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:12:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:12:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:12:32 Aux=
04:12:32 Message to Camera, serial 181290 queued
04:13:08 Received message from Master: op=PointingHead serial=181303
04:13:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:13:08 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:13:09 Point started: ret=0
04:13:09 point_skyscan result=0
04:13:09 Check angles
04:13:09 SkyScan query
04:13:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.16<-13544  Statuses=0008 0009
04:13:10 Msec=0  True Az=112.995  Ze=-23.16  Az status=0008  Ze status=0009
04:13:10 Check angles
04:13:10 SkyScan query
04:13:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.13<-14942  Statuses=0008 0009
04:13:11 Msec=750  True Az=112.995  Ze=-44.13  Az status=0008  Ze status=0009
04:13:11 Check angles
04:13:11 SkyScan query
04:13:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.085<-16339  Statuses=0008 0009
04:13:12 Msec=1500  True Az=112.995  Ze=-65.085  Az status=0008  Ze status=0009
04:13:12 Check angles
04:13:12 SkyScan query
04:13:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.07<-17738  Statuses=0008 0009
04:13:12 Msec=2250  True Az=112.995  Ze=-86.07  Az status=0008  Ze status=0009
04:13:12 Check angles
04:13:12 SkyScan query
04:13:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.01<-19134  Statuses=0008 0009
04:13:13 Msec=3000  True Az=112.995  Ze=-107.01  Az status=0008  Ze status=0009
04:13:13 Check angles
04:13:13 SkyScan query
04:13:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.965<-20531  Statuses=0008 0009
04:13:14 Msec=3750  True Az=112.995  Ze=-127.965  Az status=0008  Ze status=0009
04:13:14 Check angles
04:13:14 SkyScan query
04:13:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.92<-21928  Statuses=0008 0009
04:13:15 Msec=4500  True Az=112.995  Ze=-148.92  Az status=0008  Ze status=0009
04:13:15 Check angles
04:13:15 SkyScan query
04:13:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.86<-23324  Statuses=0008 0009
04:13:15 Msec=5250  True Az=112.995  Ze=-169.86  Az status=0008  Ze status=0009
04:13:15 Check angles
04:13:15 SkyScan query
04:13:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:13:16 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:13:16 Message to Master queued w/err=0: serial=181303 error=0
04:13:21 Received message from Master: op=Filter serial=181304
04:13:21 Color wheel filter change from 0 to 0
04:13:21 FLIGetFilterPos err=0  currentPosition=0
04:13:21 FLIGetStepsRemaining err=0  RemainingSteps=0
04:13:21 Filter is already there-color wheel unchanged
04:13:21 Received message from Master: op=Shutter serial=181305
04:13:21 Shutter LASER open
04:13:21 Received message from Camera: op=State serial=181307
04:13:21 GetSingleValue result=40  Value=cccccccc
04:13:21 SkyScan query
04:13:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:13:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:22 Parameters OK
04:13:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:22 Set A/D data flow result=40
04:13:22 Set A/D channel type result=40
04:13:22 Set A/D encoding result=40
04:13:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:22 Set channel filter=0.000000e+000  result=40
04:13:22 Config A/D  Result=40
04:13:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:22 Get A/D filter: -9.255963e+061  result=40
04:13:22 Get A/D value=-858993460  result=40
04:13:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:22 Parameters OK
04:13:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:22 Set A/D data flow result=40
04:13:22 Set A/D channel type result=40
04:13:22 Set A/D encoding result=40
04:13:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:22 Set channel filter=0.000000e+000  result=40
04:13:22 Config A/D  Result=40
04:13:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:22 Get A/D filter: -9.255963e+061  result=40
04:13:22 Get A/D value=-858993460  result=40
04:13:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:13:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:13:22 Aux=
04:13:22 Message to Camera, serial 181307 queued
04:13:30 Received message from Master: op=Shutter serial=181317
04:13:30 Shutter LASER close
04:13:31 Received message from Master: op=PointingHead serial=181321
04:13:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:13:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:13:31 Point started: ret=0
04:13:31 point_skyscan result=0
04:13:32 Check angles
04:13:32 SkyScan query
04:13:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.28<-21552  Statuses=0008 0009
04:13:33 Msec=0  True Az=112.995  Ze=-143.28  Az status=0008  Ze status=0009
04:13:33 Check angles
04:13:33 SkyScan query
04:13:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.31<-20154  Statuses=0008 0009
04:13:33 Msec=750  True Az=112.995  Ze=-122.31  Az status=0008  Ze status=0009
04:13:34 Check angles
04:13:34 SkyScan query
04:13:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.355<-18757  Statuses=0008 0009
04:13:34 Msec=1500  True Az=112.995  Ze=-101.355  Az status=0008  Ze status=0009
04:13:34 Check angles
04:13:34 SkyScan query
04:13:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.4<-17360  Statuses=0008 0009
04:13:35 Msec=2250  True Az=112.995  Ze=-80.4  Az status=0008  Ze status=0009
04:13:35 Check angles
04:13:35 SkyScan query
04:13:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
04:13:36 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
04:13:36 Check angles
04:13:36 SkyScan query
04:13:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.04<-14536  Statuses=0008 0009
04:13:36 Msec=3750  True Az=112.995  Ze=-38.04  Az status=0008  Ze status=0009
04:13:37 Check angles
04:13:37 SkyScan query
04:13:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.1<-13140  Statuses=0008 0009
04:13:37 Msec=4500  True Az=112.995  Ze=-17.1  Az status=0008  Ze status=0009
04:13:37 Check angles
04:13:37 SkyScan query
04:13:38 SkyScan query done: ret=0  az=112.995<-7533  ze=3.855<-11743  Statuses=0008 0009
04:13:38 Msec=5250  True Az=112.995  Ze=3.855  Az status=0008  Ze status=0009
04:13:38 Check angles
04:13:38 SkyScan query
04:13:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:13:39 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:13:39 Message to Master queued w/err=0: serial=181321 error=0
04:13:44 Received message from Master: op=Filter serial=181322
04:13:44 Color wheel filter change from 0 to 0
04:13:44 FLIGetFilterPos err=0  currentPosition=0
04:13:44 FLIGetStepsRemaining err=0  RemainingSteps=0
04:13:44 Filter is already there-color wheel unchanged
04:13:44 Received message from Master: op=Shutter serial=181323
04:13:44 Shutter LASER close
04:13:44 Received message from Camera: op=State serial=181325
04:13:44 GetSingleValue result=40  Value=cccccccc
04:13:44 SkyScan query
04:13:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:13:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:45 Parameters OK
04:13:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:45 Set A/D data flow result=40
04:13:45 Set A/D channel type result=40
04:13:45 Set A/D encoding result=40
04:13:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:45 Set channel filter=0.000000e+000  result=40
04:13:45 Config A/D  Result=40
04:13:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:45 Get A/D filter: -9.255963e+061  result=40
04:13:45 Get A/D value=-858993460  result=40
04:13:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:13:45 Parameters OK
04:13:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:13:45 Set A/D data flow result=40
04:13:45 Set A/D channel type result=40
04:13:45 Set A/D encoding result=40
04:13:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:13:45 Set channel filter=0.000000e+000  result=40
04:13:45 Config A/D  Result=40
04:13:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:13:45 Get A/D filter: -9.255963e+061  result=40
04:13:45 Get A/D value=-858993460  result=40
04:13:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:13:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:13:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:13:45 Aux=
04:13:45 Message to Camera, serial 181325 queued
04:14:21 Received message from Master: op=PointingHead serial=181338
04:14:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:14:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:14:22 Point started: ret=0
04:14:22 point_skyscan result=0
04:14:23 Check angles
04:14:23 SkyScan query
04:14:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:14:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:14:23 Message to Master queued w/err=0: serial=181338 error=0
04:14:28 Received message from Master: op=Filter serial=181339
04:14:28 Color wheel filter change from 0 to 0
[UTC 2019-3-9  04:14:28]
04:14:28 FLIGetFilterPos err=0  currentPosition=0
04:14:28 FLIGetStepsRemaining err=0  RemainingSteps=0
04:14:28 Filter is already there-color wheel unchanged
04:14:28 Received message from Master: op=Shutter serial=181340
04:14:28 Shutter LASER close
04:14:28 Received message from Camera: op=State serial=181342
04:14:28 GetSingleValue result=40  Value=cccccccc
04:14:28 SkyScan query
04:14:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:14:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:14:29 Parameters OK
04:14:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:14:29 Set A/D data flow result=40
04:14:29 Set A/D channel type result=40
04:14:29 Set A/D encoding result=40
04:14:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:14:29 Set channel filter=0.000000e+000  result=40
04:14:29 Config A/D  Result=40
04:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:14:29 Get A/D filter: -9.255963e+061  result=40
04:14:29 Get A/D value=-858993460  result=40
04:14:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:14:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:14:29 Parameters OK
04:14:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:14:29 Set A/D data flow result=40
04:14:29 Set A/D channel type result=40
04:14:29 Set A/D encoding result=40
04:14:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:14:29 Set channel filter=0.000000e+000  result=40
04:14:29 Config A/D  Result=40
04:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:14:29 Get A/D filter: -9.255963e+061  result=40
04:14:29 Get A/D value=-858993460  result=40
04:14:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:14:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:14:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:14:29 Aux=
04:14:29 Message to Camera, serial 181342 queued
04:15:05 Received message from Master: op=PointingHead serial=181354
04:15:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:15:05 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:15:05 Point started: ret=0
04:15:05 point_skyscan result=0
04:15:06 Check angles
04:15:06 SkyScan query
04:15:06 SkyScan query done: ret=0  az=135.975<-9065  ze=-6.495<-12433  Statuses=0009 0008
04:15:06 Msec=0  True Az=135.975  Ze=-6.495  Az status=0009  Ze status=0008
04:15:07 Check angles
04:15:07 SkyScan query
04:15:07 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.48<-12432  Statuses=0009 0008
04:15:07 Msec=750  True Az=153.9  Ze=-6.48  Az status=0009  Ze status=0008
04:15:07 Check angles
04:15:07 SkyScan query
04:15:08 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.48<-12432  Statuses=0009 0008
04:15:08 Msec=1500  True Az=171.315  Ze=-6.48  Az status=0009  Ze status=0008
04:15:08 Check angles
04:15:08 SkyScan query
04:15:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:15:09 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:15:09 Message to Master queued w/err=0: serial=181354 error=0
04:15:14 Received message from Master: op=Filter serial=181355
04:15:14 Color wheel filter change from 0 to 0
04:15:14 FLIGetFilterPos err=0  currentPosition=0
04:15:14 FLIGetStepsRemaining err=0  RemainingSteps=0
04:15:14 Filter is already there-color wheel unchanged
04:15:14 Received message from Master: op=Shutter serial=181356
04:15:14 Shutter LASER close
04:15:14 Received message from Camera: op=State serial=181358
04:15:14 GetSingleValue result=40  Value=cccccccc
04:15:14 SkyScan query
04:15:14 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:15:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:15:14 Parameters OK
04:15:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:15:14 Set A/D data flow result=40
04:15:14 Set A/D channel type result=40
04:15:14 Set A/D encoding result=40
04:15:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:15:14 Set channel filter=0.000000e+000  result=40
04:15:14 Config A/D  Result=40
04:15:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:15:14 Get A/D filter: -9.255963e+061  result=40
04:15:14 Get A/D value=-858993460  result=40
04:15:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:15:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:15:14 Parameters OK
04:15:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:15:14 Set A/D data flow result=40
04:15:14 Set A/D channel type result=40
04:15:14 Set A/D encoding result=40
04:15:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:15:14 Set channel filter=0.000000e+000  result=40
04:15:14 Config A/D  Result=40
04:15:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:15:14 Get A/D filter: -9.255963e+061  result=40
04:15:14 Get A/D value=-858993460  result=40
04:15:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:15:14 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:15:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:15:14 Aux=
04:15:14 Message to Camera, serial 181358 queued
04:15:50 Received message from Master: op=PointingHead serial=181370
04:15:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:15:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:15:51 Point started: ret=0
04:15:51 point_skyscan result=0
04:15:52 Check angles
04:15:52 SkyScan query
04:15:52 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
04:15:52 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
04:15:52 Check angles
04:15:52 SkyScan query
04:15:53 SkyScan query done: ret=0  az=135.675<-9045  ze=6.495<-11567  Statuses=0009 0008
04:15:53 Msec=750  True Az=135.675  Ze=6.495  Az status=0009  Ze status=0008
04:15:53 Check angles
04:15:53 SkyScan query
04:15:54 SkyScan query done: ret=0  az=118.155<-7877  ze=6.495<-11567  Statuses=0009 0008
04:15:54 Msec=1500  True Az=118.155  Ze=6.495  Az status=0009  Ze status=0008
04:15:54 Check angles
04:15:54 SkyScan query
04:15:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:15:54 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:15:54 Message to Master queued w/err=0: serial=181370 error=0
04:15:59 Received message from Master: op=Filter serial=181371
04:15:59 Color wheel filter change from 0 to 0
04:15:59 FLIGetFilterPos err=0  currentPosition=0
04:15:59 FLIGetStepsRemaining err=0  RemainingSteps=0
04:15:59 Filter is already there-color wheel unchanged
04:15:59 Received message from Master: op=Shutter serial=181372
04:16:00 Shutter LASER close
04:16:00 Received message from Camera: op=State serial=181374
04:16:00 GetSingleValue result=40  Value=cccccccc
04:16:00 SkyScan query
04:16:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:16:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:16:00 Parameters OK
04:16:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:16:00 Set A/D data flow result=40
04:16:00 Set A/D channel type result=40
04:16:00 Set A/D encoding result=40
04:16:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:16:00 Set channel filter=0.000000e+000  result=40
04:16:00 Config A/D  Result=40
04:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:16:00 Get A/D filter: -9.255963e+061  result=40
04:16:00 Get A/D value=-858993460  result=40
04:16:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:16:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:16:00 Parameters OK
04:16:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:16:00 Set A/D data flow result=40
04:16:00 Set A/D channel type result=40
04:16:00 Set A/D encoding result=40
04:16:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:16:00 Set channel filter=0.000000e+000  result=40
04:16:00 Config A/D  Result=40
04:16:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:16:00 Get A/D filter: -9.255963e+061  result=40
04:16:00 Get A/D value=-858993460  result=40
04:16:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:16:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:16:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:16:00 Aux=
04:16:00 Message to Camera, serial 181374 queued
04:16:37 Received message from Master: op=PointingHead serial=181387
04:16:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:16:37 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:16:37 Point started: ret=0
04:16:37 point_skyscan result=0
04:16:38 Check angles
04:16:38 SkyScan query
04:16:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.85<-13590  Statuses=0008 0009
04:16:39 Msec=0  True Az=112.995  Ze=-23.85  Az status=0008  Ze status=0009
04:16:39 Check angles
04:16:39 SkyScan query
04:16:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.805<-14987  Statuses=0008 0009
04:16:39 Msec=750  True Az=112.995  Ze=-44.805  Az status=0008  Ze status=0009
04:16:40 Check angles
04:16:40 SkyScan query
04:16:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
04:16:40 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
04:16:40 Check angles
04:16:40 SkyScan query
04:16:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.7<-17780  Statuses=0008 0009
04:16:41 Msec=2250  True Az=112.995  Ze=-86.7  Az status=0008  Ze status=0009
04:16:41 Check angles
04:16:41 SkyScan query
04:16:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
04:16:42 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
04:16:42 Check angles
04:16:42 SkyScan query
04:16:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.595<-20573  Statuses=0008 0009
04:16:42 Msec=3750  True Az=112.995  Ze=-128.595  Az status=0008  Ze status=0009
04:16:43 Check angles
04:16:43 SkyScan query
04:16:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.565<-21971  Statuses=0008 0009
04:16:43 Msec=4500  True Az=112.995  Ze=-149.565  Az status=0008  Ze status=0009
04:16:43 Check angles
04:16:43 SkyScan query
04:16:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.49<-23366  Statuses=0008 0009
04:16:44 Msec=5250  True Az=112.995  Ze=-170.49  Az status=0008  Ze status=0009
04:16:44 Check angles
04:16:44 SkyScan query
04:16:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:16:45 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:16:45 Message to Master queued w/err=0: serial=181387 error=0
04:16:50 Received message from Master: op=Filter serial=181388
04:16:50 Color wheel filter change from 0 to 0
04:16:50 FLIGetFilterPos err=0  currentPosition=0
04:16:50 FLIGetStepsRemaining err=0  RemainingSteps=0
04:16:50 Filter is already there-color wheel unchanged
04:16:50 Received message from Master: op=Shutter serial=181389
04:16:50 Shutter LASER open
04:16:50 Received message from Camera: op=State serial=181391
04:16:50 GetSingleValue result=40  Value=cccccccc
04:16:50 SkyScan query
04:16:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:16:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:16:51 Parameters OK
04:16:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:16:51 Set A/D data flow result=40
04:16:51 Set A/D channel type result=40
04:16:51 Set A/D encoding result=40
04:16:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:16:51 Set channel filter=0.000000e+000  result=40
04:16:51 Config A/D  Result=40
04:16:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:16:51 Get A/D filter: -9.255963e+061  result=40
04:16:51 Get A/D value=-858993460  result=40
04:16:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:16:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:16:51 Parameters OK
04:16:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:16:51 Set A/D data flow result=40
04:16:51 Set A/D channel type result=40
04:16:51 Set A/D encoding result=40
04:16:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:16:51 Set channel filter=0.000000e+000  result=40
04:16:51 Config A/D  Result=40
04:16:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:16:51 Get A/D filter: -9.255963e+061  result=40
04:16:51 Get A/D value=-858993460  result=40
04:16:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:16:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:16:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:16:51 Aux=
04:16:51 Message to Camera, serial 181391 queued
04:16:59 Received message from Master: op=Shutter serial=181401
04:16:59 Shutter LASER close
04:17:00 Received message from Master: op=PointingHead serial=181405
04:17:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:17:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:17:00 Point started: ret=0
04:17:00 point_skyscan result=0
04:17:01 Check angles
04:17:01 SkyScan query
04:17:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.265<-21551  Statuses=0008 0009
04:17:01 Msec=0  True Az=112.995  Ze=-143.265  Az status=0008  Ze status=0009
04:17:01 Check angles
04:17:01 SkyScan query
04:17:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.86<-20124  Statuses=0008 0009
04:17:02 Msec=750  True Az=112.995  Ze=-121.86  Az status=0008  Ze status=0009
04:17:02 Check angles
04:17:02 SkyScan query
04:17:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.92<-18728  Statuses=0008 0009
04:17:03 Msec=1500  True Az=112.995  Ze=-100.92  Az status=0008  Ze status=0009
04:17:03 Check angles
04:17:03 SkyScan query
04:17:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.53<-17302  Statuses=0008 0009
04:17:03 Msec=2250  True Az=112.995  Ze=-79.53  Az status=0008  Ze status=0009
04:17:04 Check angles
04:17:04 SkyScan query
04:17:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.575<-15905  Statuses=0008 0009
04:17:04 Msec=3000  True Az=112.995  Ze=-58.575  Az status=0008  Ze status=0009
04:17:04 Check angles
04:17:04 SkyScan query
04:17:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.62<-14508  Statuses=0008 0009
04:17:05 Msec=3750  True Az=112.995  Ze=-37.62  Az status=0008  Ze status=0009
04:17:05 Check angles
04:17:05 SkyScan query
04:17:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.2<-13080  Statuses=0008 0009
04:17:06 Msec=4500  True Az=112.995  Ze=-16.2  Az status=0008  Ze status=0009
04:17:06 Check angles
04:17:06 SkyScan query
04:17:07 SkyScan query done: ret=0  az=112.995<-7533  ze=4.92<-11672  Statuses=0008 0009
04:17:07 Msec=5250  True Az=112.995  Ze=4.92  Az status=0008  Ze status=0009
04:17:07 Check angles
04:17:07 SkyScan query
04:17:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:17:07 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:17:07 Message to Master queued w/err=0: serial=181405 error=0
04:17:12 Received message from Master: op=Filter serial=181406
04:17:12 Color wheel filter change from 0 to 0
04:17:12 FLIGetFilterPos err=0  currentPosition=0
04:17:12 FLIGetStepsRemaining err=0  RemainingSteps=0
04:17:12 Filter is already there-color wheel unchanged
04:17:12 Received message from Master: op=Shutter serial=181407
04:17:12 Shutter LASER close
04:17:13 Received message from Camera: op=State serial=181409
04:17:13 GetSingleValue result=40  Value=cccccccc
04:17:13 SkyScan query
04:17:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:17:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:13 Parameters OK
04:17:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:13 Set A/D data flow result=40
04:17:13 Set A/D channel type result=40
04:17:13 Set A/D encoding result=40
04:17:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:13 Set channel filter=0.000000e+000  result=40
04:17:13 Config A/D  Result=40
04:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:13 Get A/D filter: -9.255963e+061  result=40
04:17:13 Get A/D value=-858993460  result=40
04:17:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:13 Parameters OK
04:17:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:13 Set A/D data flow result=40
04:17:13 Set A/D channel type result=40
04:17:13 Set A/D encoding result=40
04:17:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:13 Set channel filter=0.000000e+000  result=40
04:17:13 Config A/D  Result=40
04:17:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:13 Get A/D filter: -9.255963e+061  result=40
04:17:13 Get A/D value=-858993460  result=40
04:17:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:17:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:17:13 Aux=
04:17:13 Message to Camera, serial 181409 queued
04:17:50 Received message from Master: op=PointingHead serial=181422
04:17:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:17:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:17:50 Point started: ret=0
04:17:50 point_skyscan result=0
04:17:51 Check angles
04:17:51 SkyScan query
04:17:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:17:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:17:52 Message to Master queued w/err=0: serial=181422 error=0
04:17:57 Received message from Master: op=Filter serial=181423
04:17:57 Color wheel filter change from 0 to 0
04:17:57 FLIGetFilterPos err=0  currentPosition=0
04:17:57 FLIGetStepsRemaining err=0  RemainingSteps=0
04:17:57 Filter is already there-color wheel unchanged
04:17:57 Received message from Master: op=Shutter serial=181424
04:17:57 Shutter LASER close
04:17:57 Received message from Camera: op=State serial=181426
04:17:57 GetSingleValue result=40  Value=cccccccc
04:17:57 SkyScan query
04:17:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:17:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:57 Parameters OK
04:17:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:57 Set A/D data flow result=40
04:17:57 Set A/D channel type result=40
04:17:57 Set A/D encoding result=40
04:17:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:57 Set channel filter=0.000000e+000  result=40
04:17:57 Config A/D  Result=40
04:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:57 Get A/D filter: -9.255963e+061  result=40
04:17:57 Get A/D value=-858993460  result=40
04:17:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:17:57 Parameters OK
04:17:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:17:57 Set A/D data flow result=40
04:17:57 Set A/D channel type result=40
04:17:57 Set A/D encoding result=40
04:17:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:17:57 Set channel filter=0.000000e+000  result=40
04:17:57 Config A/D  Result=40
04:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:17:57 Get A/D filter: -9.255963e+061  result=40
04:17:57 Get A/D value=-858993460  result=40
04:17:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:17:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:17:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:17:57 Aux=
04:17:57 Message to Camera, serial 181426 queued
04:18:34 Received message from Master: op=PointingHead serial=181439
04:18:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:18:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:18:35 Point started: ret=0
04:18:35 point_skyscan result=0
04:18:35 Check angles
04:18:35 SkyScan query
04:18:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:18:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:18:36 Message to Master queued w/err=0: serial=181439 error=0
04:18:41 Received message from Master: op=Filter serial=181440
04:18:41 Color wheel filter change from 0 to 0
04:18:41 FLIGetFilterPos err=0  currentPosition=0
04:18:41 FLIGetStepsRemaining err=0  RemainingSteps=0
04:18:41 Filter is already there-color wheel unchanged
04:18:41 Received message from Master: op=Shutter serial=181441
04:18:41 Shutter LASER close
04:18:41 Received message from Camera: op=State serial=181443
04:18:41 GetSingleValue result=40  Value=cccccccc
04:18:41 SkyScan query
04:18:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:18:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:18:42 Parameters OK
04:18:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:18:42 Set A/D data flow result=40
04:18:42 Set A/D channel type result=40
04:18:42 Set A/D encoding result=40
04:18:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:18:42 Set channel filter=0.000000e+000  result=40
04:18:42 Config A/D  Result=40
04:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:18:42 Get A/D filter: -9.255963e+061  result=40
04:18:42 Get A/D value=-858993460  result=40
04:18:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:18:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:18:42 Parameters OK
04:18:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:18:42 Set A/D data flow result=40
04:18:42 Set A/D channel type result=40
04:18:42 Set A/D encoding result=40
04:18:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:18:42 Set channel filter=0.000000e+000  result=40
04:18:42 Config A/D  Result=40
04:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:18:42 Get A/D filter: -9.255963e+061  result=40
04:18:42 Get A/D value=-858993460  result=40
04:18:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:18:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:18:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:18:42 Aux=
04:18:42 Message to Camera, serial 181443 queued
04:19:19 Received message from Master: op=PointingHead serial=181456
04:19:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:19:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:19:19 Point started: ret=0
04:19:19 point_skyscan result=0
04:19:20 Check angles
04:19:20 SkyScan query
04:19:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:19:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:19:20 Message to Master queued w/err=0: serial=181456 error=0
04:19:25 Received message from Master: op=Filter serial=181457
04:19:25 Color wheel filter change from 0 to 0
04:19:25 FLIGetFilterPos err=0  currentPosition=0
04:19:25 FLIGetStepsRemaining err=0  RemainingSteps=0
04:19:25 Filter is already there-color wheel unchanged
04:19:25 Received message from Master: op=Shutter serial=181458
04:19:25 Shutter LASER close
04:19:26 Received message from Camera: op=State serial=181460
04:19:26 GetSingleValue result=40  Value=cccccccc
04:19:26 SkyScan query
04:19:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:19:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:19:26 Parameters OK
04:19:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:19:26 Set A/D data flow result=40
04:19:26 Set A/D channel type result=40
04:19:26 Set A/D encoding result=40
04:19:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:19:26 Set channel filter=0.000000e+000  result=40
04:19:26 Config A/D  Result=40
04:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:19:26 Get A/D filter: -9.255963e+061  result=40
04:19:26 Get A/D value=-858993460  result=40
04:19:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:19:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:19:26 Parameters OK
04:19:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:19:26 Set A/D data flow result=40
04:19:26 Set A/D channel type result=40
04:19:26 Set A/D encoding result=40
04:19:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:19:26 Set channel filter=0.000000e+000  result=40
04:19:26 Config A/D  Result=40
04:19:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:19:26 Get A/D filter: -9.255963e+061  result=40
04:19:26 Get A/D value=-858993460  result=40
04:19:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:19:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:19:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:19:26 Aux=
04:19:26 Message to Camera, serial 181460 queued
04:20:03 Received message from Master: op=PointingHead serial=181473
04:20:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:20:03 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:20:03 Point started: ret=0
04:20:03 point_skyscan result=0
04:20:04 Check angles
04:20:04 SkyScan query
04:20:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.505<-13567  Statuses=0008 0009
04:20:05 Msec=0  True Az=112.995  Ze=-23.505  Az status=0008  Ze status=0009
04:20:05 Check angles
04:20:05 SkyScan query
04:20:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.475<-14965  Statuses=0008 0009
04:20:05 Msec=750  True Az=112.995  Ze=-44.475  Az status=0008  Ze status=0009
04:20:06 Check angles
04:20:06 SkyScan query
04:20:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.865<-16391  Statuses=0008 0009
04:20:06 Msec=1500  True Az=112.995  Ze=-65.865  Az status=0008  Ze status=0009
04:20:06 Check angles
04:20:06 SkyScan query
04:20:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.82<-17788  Statuses=0008 0009
04:20:07 Msec=2250  True Az=112.995  Ze=-86.82  Az status=0008  Ze status=0009
04:20:07 Check angles
04:20:07 SkyScan query
04:20:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.76<-19184  Statuses=0008 0009
04:20:08 Msec=3000  True Az=112.995  Ze=-107.76  Az status=0008  Ze status=0009
04:20:08 Check angles
04:20:08 SkyScan query
04:20:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.15<-20610  Statuses=0008 0009
04:20:08 Msec=3750  True Az=112.995  Ze=-129.15  Az status=0008  Ze status=0009
04:20:09 Check angles
04:20:09 SkyScan query
04:20:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.105<-22007  Statuses=0008 0009
04:20:09 Msec=4500  True Az=112.995  Ze=-150.105  Az status=0008  Ze status=0009
04:20:09 Check angles
04:20:09 SkyScan query
04:20:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.955<-23397  Statuses=0008 0009
04:20:10 Msec=5250  True Az=112.995  Ze=-170.955  Az status=0008  Ze status=0009
04:20:10 Check angles
04:20:10 SkyScan query
04:20:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:20:11 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:20:11 Message to Master queued w/err=0: serial=181473 error=0
04:20:16 Received message from Master: op=Filter serial=181474
04:20:16 Color wheel filter change from 0 to 0
04:20:16 FLIGetFilterPos err=0  currentPosition=0
04:20:16 FLIGetStepsRemaining err=0  RemainingSteps=0
04:20:16 Filter is already there-color wheel unchanged
04:20:16 Received message from Master: op=Shutter serial=181475
04:20:16 Shutter LASER open
04:20:16 Received message from Camera: op=State serial=181477
04:20:16 GetSingleValue result=40  Value=cccccccc
04:20:16 SkyScan query
04:20:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:20:17 Parameters OK
04:20:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:20:17 Set A/D data flow result=40
04:20:17 Set A/D channel type result=40
04:20:17 Set A/D encoding result=40
04:20:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:20:17 Set channel filter=0.000000e+000  result=40
04:20:17 Config A/D  Result=40
04:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:20:17 Get A/D filter: -9.255963e+061  result=40
04:20:17 Get A/D value=-858993460  result=40
04:20:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:20:17 Parameters OK
04:20:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:20:17 Set A/D data flow result=40
04:20:17 Set A/D channel type result=40
04:20:17 Set A/D encoding result=40
04:20:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:20:17 Set channel filter=0.000000e+000  result=40
04:20:17 Config A/D  Result=40
04:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:20:17 Get A/D filter: -9.255963e+061  result=40
04:20:17 Get A/D value=-858993460  result=40
04:20:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:20:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:20:17 Aux=
04:20:17 Message to Camera, serial 181477 queued
04:20:24 Received message from Master: op=Shutter serial=181486
04:20:24 Shutter LASER close
04:20:25 Received message from Master: op=PointingHead serial=181490
04:20:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:20:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:20:25 Point started: ret=0
04:20:25 point_skyscan result=0
04:20:26 Check angles
04:20:26 SkyScan query
04:20:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.785<-21519  Statuses=0008 0009
04:20:26 Msec=0  True Az=112.995  Ze=-142.785  Az status=0008  Ze status=0009
04:20:27 Check angles
04:20:27 SkyScan query
04:20:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.395<-20093  Statuses=0008 0009
04:20:27 Msec=750  True Az=112.995  Ze=-121.395  Az status=0008  Ze status=0009
04:20:27 Check angles
04:20:27 SkyScan query
04:20:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.425<-18695  Statuses=0008 0009
04:20:28 Msec=1500  True Az=112.995  Ze=-100.425  Az status=0008  Ze status=0009
04:20:28 Check angles
04:20:28 SkyScan query
04:20:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.47<-17298  Statuses=0008 0009
04:20:29 Msec=2250  True Az=112.995  Ze=-79.47  Az status=0008  Ze status=0009
04:20:29 Check angles
04:20:29 SkyScan query
04:20:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.515<-15901  Statuses=0008 0009
04:20:29 Msec=3000  True Az=112.995  Ze=-58.515  Az status=0008  Ze status=0009
04:20:30 Check angles
04:20:30 SkyScan query
04:20:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.575<-14505  Statuses=0008 0009
04:20:30 Msec=3750  True Az=112.995  Ze=-37.575  Az status=0008  Ze status=0009
04:20:30 Check angles
04:20:30 SkyScan query
04:20:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.59<-13106  Statuses=0008 0009
04:20:31 Msec=4500  True Az=112.995  Ze=-16.59  Az status=0008  Ze status=0009
04:20:31 Check angles
04:20:31 SkyScan query
04:20:32 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
04:20:32 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
04:20:32 Check angles
04:20:32 SkyScan query
04:20:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:20:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:20:32 Message to Master queued w/err=0: serial=181490 error=0
04:20:37 Received message from Master: op=Filter serial=181491
04:20:37 Color wheel filter change from 0 to 0
04:20:37 FLIGetFilterPos err=0  currentPosition=0
04:20:37 FLIGetStepsRemaining err=0  RemainingSteps=0
04:20:37 Filter is already there-color wheel unchanged
04:20:38 Received message from Master: op=Shutter serial=181492
04:20:38 Shutter LASER close
04:20:38 Received message from Camera: op=State serial=181494
04:20:38 GetSingleValue result=40  Value=cccccccc
04:20:38 SkyScan query
04:20:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:20:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:20:38 Parameters OK
04:20:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:20:38 Set A/D data flow result=40
04:20:38 Set A/D channel type result=40
04:20:38 Set A/D encoding result=40
04:20:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:20:38 Set channel filter=0.000000e+000  result=40
04:20:38 Config A/D  Result=40
04:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:20:38 Get A/D filter: -9.255963e+061  result=40
04:20:38 Get A/D value=-858993460  result=40
04:20:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:20:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:20:38 Parameters OK
04:20:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:20:38 Set A/D data flow result=40
04:20:38 Set A/D channel type result=40
04:20:38 Set A/D encoding result=40
04:20:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:20:38 Set channel filter=0.000000e+000  result=40
04:20:38 Config A/D  Result=40
04:20:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:20:38 Get A/D filter: -9.255963e+061  result=40
04:20:38 Get A/D value=-858993460  result=40
04:20:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:20:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:20:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:20:38 Aux=
04:20:38 Message to Camera, serial 181494 queued
04:21:15 Received message from Master: op=PointingHead serial=181507
04:21:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:21:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:21:15 Point started: ret=0
04:21:15 point_skyscan result=0
04:21:16 Check angles
04:21:16 SkyScan query
04:21:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:21:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:21:17 Message to Master queued w/err=0: serial=181507 error=0
04:21:22 Received message from Master: op=Filter serial=181508
04:21:22 Color wheel filter change from 0 to 0
04:21:22 FLIGetFilterPos err=0  currentPosition=0
04:21:22 FLIGetStepsRemaining err=0  RemainingSteps=0
04:21:22 Filter is already there-color wheel unchanged
04:21:22 Received message from Master: op=Shutter serial=181509
04:21:22 Shutter LASER close
04:21:22 Received message from Camera: op=State serial=181511
04:21:22 GetSingleValue result=40  Value=cccccccc
04:21:22 SkyScan query
04:21:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:21:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:21:23 Parameters OK
04:21:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:21:23 Set A/D data flow result=40
04:21:23 Set A/D channel type result=40
04:21:23 Set A/D encoding result=40
04:21:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:21:23 Set channel filter=0.000000e+000  result=40
04:21:23 Config A/D  Result=40
04:21:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:21:23 Get A/D filter: -9.255963e+061  result=40
04:21:23 Get A/D value=-858993460  result=40
04:21:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:21:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:21:23 Parameters OK
04:21:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:21:23 Set A/D data flow result=40
04:21:23 Set A/D channel type result=40
04:21:23 Set A/D encoding result=40
04:21:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:21:23 Set channel filter=0.000000e+000  result=40
04:21:23 Config A/D  Result=40
04:21:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:21:23 Get A/D filter: -9.255963e+061  result=40
04:21:23 Get A/D value=-858993460  result=40
04:21:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:21:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:21:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:21:23 Aux=
04:21:23 Message to Camera, serial 181511 queued
04:21:59 Received message from Master: op=PointingHead serial=181524
04:21:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:21:59 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:22:00 Point started: ret=0
04:22:00 point_skyscan result=0
04:22:01 Check angles
04:22:01 SkyScan query
04:22:01 SkyScan query done: ret=0  az=136.02<-9068  ze=-6.495<-12433  Statuses=0009 0008
04:22:01 Msec=0  True Az=136.02  Ze=-6.495  Az status=0009  Ze status=0008
04:22:01 Check angles
04:22:01 SkyScan query
04:22:02 SkyScan query done: ret=0  az=153.465<-10231  ze=-6.48<-12432  Statuses=0009 0008
04:22:02 Msec=750  True Az=153.465  Ze=-6.48  Az status=0009  Ze status=0008
04:22:02 Check angles
04:22:02 SkyScan query
04:22:03 SkyScan query done: ret=0  az=170.985<-11399  ze=-6.48<-12432  Statuses=0009 0008
04:22:03 Msec=1500  True Az=170.985  Ze=-6.48  Az status=0009  Ze status=0008
04:22:03 Check angles
04:22:03 SkyScan query
04:22:03 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:22:03 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:22:03 Message to Master queued w/err=0: serial=181524 error=0
04:22:08 Received message from Master: op=Filter serial=181525
04:22:08 Color wheel filter change from 0 to 0
04:22:08 FLIGetFilterPos err=0  currentPosition=0
04:22:08 FLIGetStepsRemaining err=0  RemainingSteps=0
04:22:08 Filter is already there-color wheel unchanged
04:22:09 Received message from Master: op=Shutter serial=181526
04:22:09 Shutter LASER close
04:22:09 Received message from Camera: op=State serial=181528
04:22:09 GetSingleValue result=40  Value=cccccccc
04:22:09 SkyScan query
04:22:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:22:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:22:09 Parameters OK
04:22:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:22:09 Set A/D data flow result=40
04:22:09 Set A/D channel type result=40
04:22:09 Set A/D encoding result=40
04:22:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:22:09 Set channel filter=0.000000e+000  result=40
04:22:09 Config A/D  Result=40
04:22:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:22:09 Get A/D filter: -9.255963e+061  result=40
04:22:09 Get A/D value=-858993460  result=40
04:22:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:22:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:22:09 Parameters OK
04:22:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:22:09 Set A/D data flow result=40
04:22:09 Set A/D channel type result=40
04:22:09 Set A/D encoding result=40
04:22:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:22:09 Set channel filter=0.000000e+000  result=40
04:22:09 Config A/D  Result=40
04:22:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:22:09 Get A/D filter: -9.255963e+061  result=40
04:22:09 Get A/D value=-858993460  result=40
04:22:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:22:09 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:22:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:22:09 Aux=
04:22:09 Message to Camera, serial 181528 queued
04:22:46 Received message from Master: op=PointingHead serial=181541
04:22:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:22:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:22:46 Point started: ret=0
04:22:46 point_skyscan result=0
04:22:47 Check angles
04:22:47 SkyScan query
04:22:48 SkyScan query done: ret=0  az=152.925<-10195  ze=6.51<-11566  Statuses=0009 0008
04:22:48 Msec=0  True Az=152.925  Ze=6.51  Az status=0009  Ze status=0008
04:22:48 Check angles
04:22:48 SkyScan query
04:22:48 SkyScan query done: ret=0  az=135.285<-9019  ze=6.495<-11567  Statuses=0009 0008
04:22:48 Msec=750  True Az=135.285  Ze=6.495  Az status=0009  Ze status=0008
04:22:49 Check angles
04:22:49 SkyScan query
04:22:49 SkyScan query done: ret=0  az=117.78<-7852  ze=6.495<-11567  Statuses=0009 0008
04:22:49 Msec=1500  True Az=117.78  Ze=6.495  Az status=0009  Ze status=0008
04:22:49 Check angles
04:22:49 SkyScan query
04:22:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:22:50 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:22:50 Message to Master queued w/err=0: serial=181541 error=0
04:22:55 Received message from Master: op=Filter serial=181542
04:22:55 Color wheel filter change from 0 to 0
04:22:55 FLIGetFilterPos err=0  currentPosition=0
04:22:55 FLIGetStepsRemaining err=0  RemainingSteps=0
04:22:55 Filter is already there-color wheel unchanged
04:22:55 Received message from Master: op=Shutter serial=181543
04:22:55 Shutter LASER close
04:22:55 Received message from Camera: op=State serial=181545
04:22:55 GetSingleValue result=40  Value=cccccccc
04:22:55 SkyScan query
04:22:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:22:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:22:56 Parameters OK
04:22:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:22:56 Set A/D data flow result=40
04:22:56 Set A/D channel type result=40
04:22:56 Set A/D encoding result=40
04:22:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:22:56 Set channel filter=0.000000e+000  result=40
04:22:56 Config A/D  Result=40
04:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:22:56 Get A/D filter: -9.255963e+061  result=40
04:22:56 Get A/D value=-858993460  result=40
04:22:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:22:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:22:56 Parameters OK
04:22:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:22:56 Set A/D data flow result=40
04:22:56 Set A/D channel type result=40
04:22:56 Set A/D encoding result=40
04:22:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:22:56 Set channel filter=0.000000e+000  result=40
04:22:56 Config A/D  Result=40
04:22:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:22:56 Get A/D filter: -9.255963e+061  result=40
04:22:56 Get A/D value=-858993460  result=40
04:22:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:22:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:22:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:22:56 Aux=
04:22:56 Message to Camera, serial 181545 queued
04:23:33 Received message from Master: op=PointingHead serial=181558
04:23:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:23:33 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:23:33 Point started: ret=0
04:23:33 point_skyscan result=0
04:23:34 Check angles
04:23:34 SkyScan query
04:23:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.73<-13582  Statuses=0008 0009
04:23:34 Msec=0  True Az=112.995  Ze=-23.73  Az status=0008  Ze status=0009
04:23:35 Check angles
04:23:35 SkyScan query
04:23:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.12<-15008  Statuses=0008 0009
04:23:35 Msec=750  True Az=112.995  Ze=-45.12  Az status=0008  Ze status=0009
04:23:35 Check angles
04:23:35 SkyScan query
04:23:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.495<-16433  Statuses=0008 0009
04:23:36 Msec=1500  True Az=112.995  Ze=-66.495  Az status=0008  Ze status=0009
04:23:36 Check angles
04:23:36 SkyScan query
04:23:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.45<-17830  Statuses=0008 0009
04:23:37 Msec=2250  True Az=112.995  Ze=-87.45  Az status=0008  Ze status=0009
04:23:37 Check angles
04:23:37 SkyScan query
04:23:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.405<-19227  Statuses=0008 0009
04:23:37 Msec=3000  True Az=112.995  Ze=-108.405  Az status=0008  Ze status=0009
04:23:38 Check angles
04:23:38 SkyScan query
04:23:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.36<-20624  Statuses=0008 0009
04:23:38 Msec=3750  True Az=112.995  Ze=-129.36  Az status=0008  Ze status=0009
04:23:38 Check angles
04:23:38 SkyScan query
04:23:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.315<-22021  Statuses=0008 0009
04:23:39 Msec=4500  True Az=112.995  Ze=-150.315  Az status=0008  Ze status=0009
04:23:39 Check angles
04:23:39 SkyScan query
04:23:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.42<-23428  Statuses=0008 0009
04:23:40 Msec=5250  True Az=112.995  Ze=-171.42  Az status=0008  Ze status=0009
04:23:40 Check angles
04:23:40 SkyScan query
04:23:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:23:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:23:40 Message to Master queued w/err=0: serial=181558 error=0
04:23:45 Received message from Master: op=Filter serial=181559
04:23:45 Color wheel filter change from 0 to 0
04:23:45 FLIGetFilterPos err=0  currentPosition=0
04:23:45 FLIGetStepsRemaining err=0  RemainingSteps=0
04:23:45 Filter is already there-color wheel unchanged
04:23:46 Received message from Master: op=Shutter serial=181560
04:23:46 Shutter LASER open
04:23:46 Received message from Camera: op=State serial=181562
04:23:46 GetSingleValue result=40  Value=cccccccc
04:23:46 SkyScan query
04:23:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:23:46 Parameters OK
04:23:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:23:46 Set A/D data flow result=40
04:23:46 Set A/D channel type result=40
04:23:46 Set A/D encoding result=40
04:23:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:23:46 Set channel filter=0.000000e+000  result=40
04:23:46 Config A/D  Result=40
04:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:23:46 Get A/D filter: -9.255963e+061  result=40
04:23:46 Get A/D value=-858993460  result=40
04:23:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:23:46 Parameters OK
04:23:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:23:46 Set A/D data flow result=40
04:23:46 Set A/D channel type result=40
04:23:46 Set A/D encoding result=40
04:23:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:23:46 Set channel filter=0.000000e+000  result=40
04:23:46 Config A/D  Result=40
04:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:23:46 Get A/D filter: -9.255963e+061  result=40
04:23:46 Get A/D value=-858993460  result=40
04:23:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:23:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:23:46 Aux=
04:23:46 Message to Camera, serial 181562 queued
[UTC 2019-3-9  04:23:48]
04:23:55 Received message from Master: op=Shutter serial=181572
04:23:55 Shutter LASER close
04:23:55 Received message from Master: op=PointingHead serial=181576
04:23:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:23:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:23:56 Point started: ret=0
04:23:56 point_skyscan result=0
04:23:56 Check angles
04:23:56 SkyScan query
04:23:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.95<-21530  Statuses=0008 0009
04:23:57 Msec=0  True Az=112.995  Ze=-142.95  Az status=0008  Ze status=0009
04:23:57 Check angles
04:23:57 SkyScan query
04:23:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.98<-20132  Statuses=0008 0009
04:23:58 Msec=750  True Az=112.995  Ze=-121.98  Az status=0008  Ze status=0009
04:23:58 Check angles
04:23:58 SkyScan query
04:23:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.055<-18737  Statuses=0008 0009
04:23:58 Msec=1500  True Az=112.995  Ze=-101.055  Az status=0008  Ze status=0009
04:23:59 Check angles
04:23:59 SkyScan query
04:23:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.1<-17340  Statuses=0008 0009
04:23:59 Msec=2250  True Az=112.995  Ze=-80.1  Az status=0008  Ze status=0009
04:23:59 Check angles
04:23:59 SkyScan query
04:24:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.16<-15944  Statuses=0008 0009
04:24:00 Msec=3000  True Az=112.995  Ze=-59.16  Az status=0008  Ze status=0009
04:24:00 Check angles
04:24:00 SkyScan query
04:24:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.16<-14544  Statuses=0008 0009
04:24:01 Msec=3750  True Az=112.995  Ze=-38.16  Az status=0008  Ze status=0009
04:24:01 Check angles
04:24:01 SkyScan query
04:24:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.235<-13149  Statuses=0008 0009
04:24:01 Msec=4500  True Az=112.995  Ze=-17.235  Az status=0008  Ze status=0009
04:24:02 Check angles
04:24:02 SkyScan query
04:24:02 SkyScan query done: ret=0  az=112.995<-7533  ze=4.14<-11724  Statuses=0008 0009
04:24:02 Msec=5250  True Az=112.995  Ze=4.14  Az status=0008  Ze status=0009
04:24:02 Check angles
04:24:02 SkyScan query
04:24:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:24:03 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:24:03 Message to Master queued w/err=0: serial=181576 error=0
04:24:08 Received message from Master: op=Filter serial=181577
04:24:08 Color wheel filter change from 0 to 0
04:24:08 FLIGetFilterPos err=0  currentPosition=0
04:24:08 FLIGetStepsRemaining err=0  RemainingSteps=0
04:24:08 Filter is already there-color wheel unchanged
04:24:08 Received message from Master: op=Shutter serial=181578
04:24:08 Shutter LASER close
04:24:08 Received message from Camera: op=State serial=181580
04:24:08 GetSingleValue result=40  Value=cccccccc
04:24:08 SkyScan query
04:24:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:09 Parameters OK
04:24:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:09 Set A/D data flow result=40
04:24:09 Set A/D channel type result=40
04:24:09 Set A/D encoding result=40
04:24:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:09 Set channel filter=0.000000e+000  result=40
04:24:09 Config A/D  Result=40
04:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:09 Get A/D filter: -9.255963e+061  result=40
04:24:09 Get A/D value=-858993460  result=40
04:24:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:09 Parameters OK
04:24:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:09 Set A/D data flow result=40
04:24:09 Set A/D channel type result=40
04:24:09 Set A/D encoding result=40
04:24:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:09 Set channel filter=0.000000e+000  result=40
04:24:09 Config A/D  Result=40
04:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:09 Get A/D filter: -9.255963e+061  result=40
04:24:09 Get A/D value=-858993460  result=40
04:24:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:24:09 Aux=
04:24:09 Message to Camera, serial 181580 queued
04:24:46 Received message from Master: op=PointingHead serial=181593
04:24:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:24:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:24:46 Point started: ret=0
04:24:46 point_skyscan result=0
04:24:47 Check angles
04:24:47 SkyScan query
04:24:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:24:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:24:47 Message to Master queued w/err=0: serial=181593 error=0
04:24:52 Received message from Master: op=Filter serial=181594
04:24:52 Color wheel filter change from 0 to 0
04:24:52 FLIGetFilterPos err=0  currentPosition=0
04:24:52 FLIGetStepsRemaining err=0  RemainingSteps=0
04:24:52 Filter is already there-color wheel unchanged
04:24:53 Received message from Master: op=Shutter serial=181595
04:24:53 Shutter LASER close
04:24:53 Received message from Camera: op=State serial=181597
04:24:53 GetSingleValue result=40  Value=cccccccc
04:24:53 SkyScan query
04:24:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:24:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:53 Parameters OK
04:24:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:53 Set A/D data flow result=40
04:24:53 Set A/D channel type result=40
04:24:53 Set A/D encoding result=40
04:24:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:53 Set channel filter=0.000000e+000  result=40
04:24:53 Config A/D  Result=40
04:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:53 Get A/D filter: -9.255963e+061  result=40
04:24:53 Get A/D value=-858993460  result=40
04:24:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:24:53 Parameters OK
04:24:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:24:53 Set A/D data flow result=40
04:24:53 Set A/D channel type result=40
04:24:53 Set A/D encoding result=40
04:24:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:24:53 Set channel filter=0.000000e+000  result=40
04:24:53 Config A/D  Result=40
04:24:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:24:53 Get A/D filter: -9.255963e+061  result=40
04:24:53 Get A/D value=-858993460  result=40
04:24:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:24:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:24:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:24:53 Aux=
04:24:53 Message to Camera, serial 181597 queued
04:25:30 Received message from Master: op=PointingHead serial=181610
04:25:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:25:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:25:30 Point started: ret=0
04:25:30 point_skyscan result=0
04:25:31 Check angles
04:25:31 SkyScan query
04:25:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:25:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:25:32 Message to Master queued w/err=0: serial=181610 error=0
04:25:37 Received message from Master: op=Filter serial=181611
04:25:37 Color wheel filter change from 0 to 0
04:25:37 FLIGetFilterPos err=0  currentPosition=0
04:25:37 FLIGetStepsRemaining err=0  RemainingSteps=0
04:25:37 Filter is already there-color wheel unchanged
04:25:37 Received message from Master: op=Shutter serial=181612
04:25:37 Shutter LASER close
04:25:37 Received message from Camera: op=State serial=181614
04:25:37 GetSingleValue result=40  Value=cccccccc
04:25:37 SkyScan query
04:25:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:25:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:25:37 Parameters OK
04:25:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:25:37 Set A/D data flow result=40
04:25:37 Set A/D channel type result=40
04:25:37 Set A/D encoding result=40
04:25:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:25:37 Set channel filter=0.000000e+000  result=40
04:25:37 Config A/D  Result=40
04:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:25:37 Get A/D filter: -9.255963e+061  result=40
04:25:37 Get A/D value=-858993460  result=40
04:25:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:25:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:25:37 Parameters OK
04:25:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:25:37 Set A/D data flow result=40
04:25:37 Set A/D channel type result=40
04:25:37 Set A/D encoding result=40
04:25:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:25:37 Set channel filter=0.000000e+000  result=40
04:25:37 Config A/D  Result=40
04:25:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:25:37 Get A/D filter: -9.255963e+061  result=40
04:25:37 Get A/D value=-858993460  result=40
04:25:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:25:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:25:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:25:37 Aux=
04:25:37 Message to Camera, serial 181614 queued
04:26:14 Received message from Master: op=PointingHead serial=181627
04:26:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:26:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:26:15 Point started: ret=0
04:26:15 point_skyscan result=0
04:26:15 Check angles
04:26:15 SkyScan query
04:26:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:26:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:26:16 Message to Master queued w/err=0: serial=181627 error=0
04:26:21 Received message from Master: op=Filter serial=181628
04:26:21 Color wheel filter change from 0 to 0
04:26:21 FLIGetFilterPos err=0  currentPosition=0
04:26:21 FLIGetStepsRemaining err=0  RemainingSteps=0
04:26:21 Filter is already there-color wheel unchanged
04:26:21 Received message from Master: op=Shutter serial=181629
04:26:21 Shutter LASER close
04:26:21 Received message from Camera: op=State serial=181631
04:26:21 GetSingleValue result=40  Value=cccccccc
04:26:21 SkyScan query
04:26:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:26:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:26:22 Parameters OK
04:26:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:26:22 Set A/D data flow result=40
04:26:22 Set A/D channel type result=40
04:26:22 Set A/D encoding result=40
04:26:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:26:22 Set channel filter=0.000000e+000  result=40
04:26:22 Config A/D  Result=40
04:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:26:22 Get A/D filter: -9.255963e+061  result=40
04:26:22 Get A/D value=-858993460  result=40
04:26:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:26:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:26:22 Parameters OK
04:26:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:26:22 Set A/D data flow result=40
04:26:22 Set A/D channel type result=40
04:26:22 Set A/D encoding result=40
04:26:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:26:22 Set channel filter=0.000000e+000  result=40
04:26:22 Config A/D  Result=40
04:26:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:26:22 Get A/D filter: -9.255963e+061  result=40
04:26:22 Get A/D value=-858993460  result=40
04:26:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:26:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:26:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:26:22 Aux=
04:26:22 Message to Camera, serial 181631 queued
04:26:59 Received message from Master: op=PointingHead serial=181644
04:26:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:26:59 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:26:59 Point started: ret=0
04:26:59 point_skyscan result=0
04:27:00 Check angles
04:27:00 SkyScan query
04:27:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
04:27:00 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
04:27:00 Check angles
04:27:00 SkyScan query
04:27:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.28<-14952  Statuses=0008 0009
04:27:01 Msec=750  True Az=112.995  Ze=-44.28  Az status=0008  Ze status=0009
04:27:01 Check angles
04:27:01 SkyScan query
04:27:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.25<-16350  Statuses=0008 0009
04:27:02 Msec=1500  True Az=112.995  Ze=-65.25  Az status=0008  Ze status=0009
04:27:02 Check angles
04:27:02 SkyScan query
04:27:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.205<-17747  Statuses=0008 0009
04:27:03 Msec=2250  True Az=112.995  Ze=-86.205  Az status=0008  Ze status=0009
04:27:03 Check angles
04:27:03 SkyScan query
04:27:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.145<-19143  Statuses=0008 0009
04:27:03 Msec=3000  True Az=112.995  Ze=-107.145  Az status=0008  Ze status=0009
04:27:03 Check angles
04:27:03 SkyScan query
04:27:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.52<-20568  Statuses=0008 0009
04:27:04 Msec=3750  True Az=112.995  Ze=-128.52  Az status=0008  Ze status=0009
04:27:04 Check angles
04:27:04 SkyScan query
04:27:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.49<-21966  Statuses=0008 0009
04:27:05 Msec=4500  True Az=112.995  Ze=-149.49  Az status=0008  Ze status=0009
04:27:05 Check angles
04:27:05 SkyScan query
04:27:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.43<-23362  Statuses=0008 0009
04:27:06 Msec=5250  True Az=112.995  Ze=-170.43  Az status=0008  Ze status=0009
04:27:06 Check angles
04:27:06 SkyScan query
04:27:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:27:06 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:27:06 Message to Master queued w/err=0: serial=181644 error=0
04:27:11 Received message from Master: op=Filter serial=181645
04:27:11 Color wheel filter change from 0 to 0
04:27:11 FLIGetFilterPos err=0  currentPosition=0
04:27:11 FLIGetStepsRemaining err=0  RemainingSteps=0
04:27:11 Filter is already there-color wheel unchanged
04:27:11 Received message from Master: op=Shutter serial=181646
04:27:11 Shutter LASER open
04:27:12 Received message from Camera: op=State serial=181648
04:27:12 GetSingleValue result=40  Value=cccccccc
04:27:12 SkyScan query
04:27:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:27:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:27:12 Parameters OK
04:27:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:27:12 Set A/D data flow result=40
04:27:12 Set A/D channel type result=40
04:27:12 Set A/D encoding result=40
04:27:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:27:12 Set channel filter=0.000000e+000  result=40
04:27:12 Config A/D  Result=40
04:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:27:12 Get A/D filter: -9.255963e+061  result=40
04:27:12 Get A/D value=-858993460  result=40
04:27:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:27:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:27:12 Parameters OK
04:27:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:27:12 Set A/D data flow result=40
04:27:12 Set A/D channel type result=40
04:27:12 Set A/D encoding result=40
04:27:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:27:12 Set channel filter=0.000000e+000  result=40
04:27:12 Config A/D  Result=40
04:27:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:27:12 Get A/D filter: -9.255963e+061  result=40
04:27:12 Get A/D value=-858993460  result=40
04:27:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:27:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:27:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:27:12 Aux=
04:27:12 Message to Camera, serial 181648 queued
04:27:21 Received message from Master: op=Shutter serial=181658
04:27:21 Shutter LASER close
04:27:21 Received message from Master: op=PointingHead serial=181662
04:27:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:27:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:27:22 Point started: ret=0
04:27:22 point_skyscan result=0
04:27:22 Check angles
04:27:22 SkyScan query
04:27:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.86<-21524  Statuses=0008 0009
04:27:23 Msec=0  True Az=112.995  Ze=-142.86  Az status=0008  Ze status=0009
04:27:23 Check angles
04:27:23 SkyScan query
04:27:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.455<-20097  Statuses=0008 0009
04:27:24 Msec=750  True Az=112.995  Ze=-121.455  Az status=0008  Ze status=0009
04:27:24 Check angles
04:27:24 SkyScan query
04:27:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.515<-18701  Statuses=0008 0009
04:27:24 Msec=1500  True Az=112.995  Ze=-100.515  Az status=0008  Ze status=0009
04:27:25 Check angles
04:27:25 SkyScan query
04:27:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.545<-17303  Statuses=0008 0009
04:27:25 Msec=2250  True Az=112.995  Ze=-79.545  Az status=0008  Ze status=0009
04:27:25 Check angles
04:27:25 SkyScan query
04:27:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.605<-15907  Statuses=0008 0009
04:27:26 Msec=3000  True Az=112.995  Ze=-58.605  Az status=0008  Ze status=0009
04:27:26 Check angles
04:27:26 SkyScan query
04:27:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.65<-14510  Statuses=0008 0009
04:27:27 Msec=3750  True Az=112.995  Ze=-37.65  Az status=0008  Ze status=0009
04:27:27 Check angles
04:27:27 SkyScan query
04:27:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.695<-13113  Statuses=0008 0009
04:27:27 Msec=4500  True Az=112.995  Ze=-16.695  Az status=0008  Ze status=0009
04:27:28 Check angles
04:27:28 SkyScan query
04:27:28 SkyScan query done: ret=0  az=112.995<-7533  ze=4.23<-11718  Statuses=0008 0009
04:27:28 Msec=5250  True Az=112.995  Ze=4.23  Az status=0008  Ze status=0009
04:27:28 Check angles
04:27:28 SkyScan query
04:27:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:27:29 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:27:29 Message to Master queued w/err=0: serial=181662 error=0
04:27:34 Received message from Master: op=Filter serial=181663
04:27:34 Color wheel filter change from 0 to 0
04:27:34 FLIGetFilterPos err=0  currentPosition=0
04:27:34 FLIGetStepsRemaining err=0  RemainingSteps=0
04:27:34 Filter is already there-color wheel unchanged
04:27:34 Received message from Master: op=Shutter serial=181664
04:27:34 Shutter LASER close
04:27:34 Received message from Camera: op=State serial=181666
04:27:34 GetSingleValue result=40  Value=cccccccc
04:27:34 SkyScan query
04:27:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:27:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:27:35 Parameters OK
04:27:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:27:35 Set A/D data flow result=40
04:27:35 Set A/D channel type result=40
04:27:35 Set A/D encoding result=40
04:27:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:27:35 Set channel filter=0.000000e+000  result=40
04:27:35 Config A/D  Result=40
04:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:27:35 Get A/D filter: -9.255963e+061  result=40
04:27:35 Get A/D value=-858993460  result=40
04:27:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:27:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:27:35 Parameters OK
04:27:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:27:35 Set A/D data flow result=40
04:27:35 Set A/D channel type result=40
04:27:35 Set A/D encoding result=40
04:27:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:27:35 Set channel filter=0.000000e+000  result=40
04:27:35 Config A/D  Result=40
04:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:27:35 Get A/D filter: -9.255963e+061  result=40
04:27:35 Get A/D value=-858993460  result=40
04:27:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:27:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:27:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:27:35 Aux=
04:27:35 Message to Camera, serial 181666 queued
04:28:12 Received message from Master: op=PointingHead serial=181679
04:28:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:28:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:28:12 Point started: ret=0
04:28:12 point_skyscan result=0
04:28:13 Check angles
04:28:13 SkyScan query
04:28:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:28:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:28:13 Message to Master queued w/err=0: serial=181679 error=0
04:28:18 Received message from Master: op=Filter serial=181680
04:28:18 Color wheel filter change from 0 to 0
04:28:18 FLIGetFilterPos err=0  currentPosition=0
04:28:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:28:18 Filter is already there-color wheel unchanged
04:28:19 Received message from Master: op=Shutter serial=181681
04:28:19 Shutter LASER close
04:28:19 Received message from Camera: op=State serial=181683
04:28:19 GetSingleValue result=40  Value=cccccccc
04:28:19 SkyScan query
04:28:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:28:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:28:19 Parameters OK
04:28:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:28:19 Set A/D data flow result=40
04:28:19 Set A/D channel type result=40
04:28:19 Set A/D encoding result=40
04:28:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:28:19 Set channel filter=0.000000e+000  result=40
04:28:19 Config A/D  Result=40
04:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:28:19 Get A/D filter: -9.255963e+061  result=40
04:28:19 Get A/D value=-858993460  result=40
04:28:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:28:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:28:19 Parameters OK
04:28:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:28:19 Set A/D data flow result=40
04:28:19 Set A/D channel type result=40
04:28:19 Set A/D encoding result=40
04:28:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:28:19 Set channel filter=0.000000e+000  result=40
04:28:19 Config A/D  Result=40
04:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:28:19 Get A/D filter: -9.255963e+061  result=40
04:28:19 Get A/D value=-858993460  result=40
04:28:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:28:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:28:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:28:19 Aux=
04:28:19 Message to Camera, serial 181683 queued
04:28:56 Received message from Master: op=PointingHead serial=181696
04:28:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:28:56 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:28:56 Point started: ret=0
04:28:56 point_skyscan result=0
04:28:57 Check angles
04:28:57 SkyScan query
04:28:58 SkyScan query done: ret=0  az=135.975<-9065  ze=-6.495<-12433  Statuses=0009 0008
04:28:58 Msec=0  True Az=135.975  Ze=-6.495  Az status=0009  Ze status=0008
04:28:58 Check angles
04:28:58 SkyScan query
04:28:58 SkyScan query done: ret=0  az=153.45<-10230  ze=-6.48<-12432  Statuses=0009 0008
04:28:58 Msec=750  True Az=153.45  Ze=-6.48  Az status=0009  Ze status=0008
04:28:59 Check angles
04:28:59 SkyScan query
04:28:59 SkyScan query done: ret=0  az=170.955<-11397  ze=-6.48<-12432  Statuses=0009 0008
04:28:59 Msec=1500  True Az=170.955  Ze=-6.48  Az status=0009  Ze status=0008
04:28:59 Check angles
04:28:59 SkyScan query
04:29:00 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:29:00 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:29:00 Message to Master queued w/err=0: serial=181696 error=0
04:29:05 Received message from Master: op=Filter serial=181697
04:29:05 Color wheel filter change from 0 to 0
04:29:05 FLIGetFilterPos err=0  currentPosition=0
04:29:05 FLIGetStepsRemaining err=0  RemainingSteps=0
04:29:05 Filter is already there-color wheel unchanged
04:29:05 Received message from Master: op=Shutter serial=181698
04:29:05 Shutter LASER close
04:29:05 Received message from Camera: op=State serial=181700
04:29:05 GetSingleValue result=40  Value=cccccccc
04:29:05 SkyScan query
04:29:06 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:29:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:29:06 Parameters OK
04:29:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:29:06 Set A/D data flow result=40
04:29:06 Set A/D channel type result=40
04:29:06 Set A/D encoding result=40
04:29:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:29:06 Set channel filter=0.000000e+000  result=40
04:29:06 Config A/D  Result=40
04:29:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:29:06 Get A/D filter: -9.255963e+061  result=40
04:29:06 Get A/D value=-858993460  result=40
04:29:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:29:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:29:06 Parameters OK
04:29:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:29:06 Set A/D data flow result=40
04:29:06 Set A/D channel type result=40
04:29:06 Set A/D encoding result=40
04:29:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:29:06 Set channel filter=0.000000e+000  result=40
04:29:06 Config A/D  Result=40
04:29:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:29:06 Get A/D filter: -9.255963e+061  result=40
04:29:06 Get A/D value=-858993460  result=40
04:29:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:29:06 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:29:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:29:06 Aux=
04:29:06 Message to Camera, serial 181700 queued
04:29:43 Received message from Master: op=PointingHead serial=181713
04:29:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:29:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:29:43 Point started: ret=0
04:29:43 point_skyscan result=0
04:29:44 Check angles
04:29:44 SkyScan query
04:29:44 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
04:29:44 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
04:29:44 Check angles
04:29:44 SkyScan query
04:29:45 SkyScan query done: ret=0  az=135.735<-9049  ze=6.495<-11567  Statuses=0009 0008
04:29:45 Msec=750  True Az=135.735  Ze=6.495  Az status=0009  Ze status=0008
04:29:45 Check angles
04:29:45 SkyScan query
04:29:46 SkyScan query done: ret=0  az=118.23<-7882  ze=6.495<-11567  Statuses=0009 0008
04:29:46 Msec=1500  True Az=118.23  Ze=6.495  Az status=0009  Ze status=0008
04:29:46 Check angles
04:29:46 SkyScan query
04:29:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:29:47 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:29:47 Message to Master queued w/err=0: serial=181713 error=0
04:29:52 Received message from Master: op=Filter serial=181714
04:29:52 Color wheel filter change from 0 to 0
04:29:52 FLIGetFilterPos err=0  currentPosition=0
04:29:52 FLIGetStepsRemaining err=0  RemainingSteps=0
04:29:52 Filter is already there-color wheel unchanged
04:29:52 Received message from Master: op=Shutter serial=181715
04:29:52 Shutter LASER close
04:29:52 Received message from Camera: op=State serial=181717
04:29:52 GetSingleValue result=40  Value=cccccccc
04:29:52 SkyScan query
04:29:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:29:52 Parameters OK
04:29:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:29:52 Set A/D data flow result=40
04:29:52 Set A/D channel type result=40
04:29:52 Set A/D encoding result=40
04:29:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:29:52 Set channel filter=0.000000e+000  result=40
04:29:52 Config A/D  Result=40
04:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:29:52 Get A/D filter: -9.255963e+061  result=40
04:29:52 Get A/D value=-858993460  result=40
04:29:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:29:52 Parameters OK
04:29:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:29:52 Set A/D data flow result=40
04:29:52 Set A/D channel type result=40
04:29:52 Set A/D encoding result=40
04:29:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:29:52 Set channel filter=0.000000e+000  result=40
04:29:52 Config A/D  Result=40
04:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:29:52 Get A/D filter: -9.255963e+061  result=40
04:29:52 Get A/D value=-858993460  result=40
04:29:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:29:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:29:52 Aux=
04:29:52 Message to Camera, serial 181717 queued
04:30:29 Received message from Master: op=PointingHead serial=181730
04:30:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:30:29 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:30:29 Point started: ret=0
04:30:29 point_skyscan result=0
04:30:30 Check angles
04:30:30 SkyScan query
04:30:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.58<-13572  Statuses=0008 0009
04:30:31 Msec=0  True Az=112.995  Ze=-23.58  Az status=0008  Ze status=0009
04:30:31 Check angles
04:30:31 SkyScan query
04:30:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.985<-14999  Statuses=0008 0009
04:30:32 Msec=750  True Az=112.995  Ze=-44.985  Az status=0008  Ze status=0009
04:30:32 Check angles
04:30:32 SkyScan query
04:30:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.925<-16395  Statuses=0008 0009
04:30:32 Msec=1500  True Az=112.995  Ze=-65.925  Az status=0008  Ze status=0009
04:30:33 Check angles
04:30:33 SkyScan query
04:30:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.88<-17792  Statuses=0008 0009
04:30:33 Msec=2250  True Az=112.995  Ze=-86.88  Az status=0008  Ze status=0009
04:30:33 Check angles
04:30:33 SkyScan query
04:30:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.835<-19189  Statuses=0008 0009
04:30:34 Msec=3000  True Az=112.995  Ze=-107.835  Az status=0008  Ze status=0009
04:30:34 Check angles
04:30:34 SkyScan query
04:30:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.76<-20584  Statuses=0008 0009
04:30:35 Msec=3750  True Az=112.995  Ze=-128.76  Az status=0008  Ze status=0009
04:30:35 Check angles
04:30:35 SkyScan query
04:30:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.18<-22012  Statuses=0008 0009
04:30:35 Msec=4500  True Az=112.995  Ze=-150.18  Az status=0008  Ze status=0009
04:30:36 Check angles
04:30:36 SkyScan query
04:30:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.985<-23399  Statuses=0008 0009
04:30:36 Msec=5250  True Az=112.995  Ze=-170.985  Az status=0008  Ze status=0009
04:30:36 Check angles
04:30:36 SkyScan query
04:30:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:30:37 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:30:37 Message to Master queued w/err=0: serial=181730 error=0
04:30:42 Received message from Master: op=Filter serial=181731
04:30:42 Color wheel filter change from 0 to 0
04:30:42 FLIGetFilterPos err=0  currentPosition=0
04:30:42 FLIGetStepsRemaining err=0  RemainingSteps=0
04:30:42 Filter is already there-color wheel unchanged
04:30:42 Received message from Master: op=Shutter serial=181732
04:30:42 Shutter LASER open
04:30:42 Received message from Camera: op=State serial=181734
04:30:42 GetSingleValue result=40  Value=cccccccc
04:30:42 SkyScan query
04:30:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:30:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:30:43 Parameters OK
04:30:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:30:43 Set A/D data flow result=40
04:30:43 Set A/D channel type result=40
04:30:43 Set A/D encoding result=40
04:30:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:30:43 Set channel filter=0.000000e+000  result=40
04:30:43 Config A/D  Result=40
04:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:30:43 Get A/D filter: -9.255963e+061  result=40
04:30:43 Get A/D value=-858993460  result=40
04:30:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:30:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:30:43 Parameters OK
04:30:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:30:43 Set A/D data flow result=40
04:30:43 Set A/D channel type result=40
04:30:43 Set A/D encoding result=40
04:30:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:30:43 Set channel filter=0.000000e+000  result=40
04:30:43 Config A/D  Result=40
04:30:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:30:43 Get A/D filter: -9.255963e+061  result=40
04:30:43 Get A/D value=-858993460  result=40
04:30:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:30:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:30:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:30:43 Aux=
04:30:43 Message to Camera, serial 181734 queued
04:30:51 Received message from Master: op=Shutter serial=181744
04:30:51 Shutter LASER close
04:30:52 Received message from Master: op=PointingHead serial=181748
04:30:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:30:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:30:52 Point started: ret=0
04:30:52 point_skyscan result=0
04:30:53 Check angles
04:30:53 SkyScan query
04:30:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
04:30:53 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
04:30:54 Check angles
04:30:54 SkyScan query
04:30:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.83<-20122  Statuses=0008 0009
04:30:54 Msec=750  True Az=112.995  Ze=-121.83  Az status=0008  Ze status=0009
04:30:54 Check angles
04:30:54 SkyScan query
04:30:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.905<-18727  Statuses=0008 0009
04:30:55 Msec=1500  True Az=112.995  Ze=-100.905  Az status=0008  Ze status=0009
04:30:55 Check angles
04:30:55 SkyScan query
04:30:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.5<-17300  Statuses=0008 0009
04:30:56 Msec=2250  True Az=112.995  Ze=-79.5  Az status=0008  Ze status=0009
04:30:56 Check angles
04:30:56 SkyScan query
04:30:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.08<-15872  Statuses=0008 0009
04:30:56 Msec=3000  True Az=112.995  Ze=-58.08  Az status=0008  Ze status=0009
04:30:57 Check angles
04:30:57 SkyScan query
04:30:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.69<-14446  Statuses=0008 0009
04:30:57 Msec=3750  True Az=112.995  Ze=-36.69  Az status=0008  Ze status=0009
04:30:57 Check angles
04:30:57 SkyScan query
04:30:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.735<-13049  Statuses=0008 0009
04:30:58 Msec=4500  True Az=112.995  Ze=-15.735  Az status=0008  Ze status=0009
04:30:58 Check angles
04:30:58 SkyScan query
04:30:59 SkyScan query done: ret=0  az=112.995<-7533  ze=4.95<-11670  Statuses=0008 0009
04:30:59 Msec=5250  True Az=112.995  Ze=4.95  Az status=0008  Ze status=0009
04:30:59 Check angles
04:30:59 SkyScan query
04:30:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:30:59 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:30:59 Message to Master queued w/err=0: serial=181748 error=0
04:31:04 Received message from Master: op=Filter serial=181749
04:31:04 Color wheel filter change from 0 to 0
04:31:04 FLIGetFilterPos err=0  currentPosition=0
04:31:04 FLIGetStepsRemaining err=0  RemainingSteps=0
04:31:04 Filter is already there-color wheel unchanged
04:31:05 Received message from Master: op=Shutter serial=181750
04:31:05 Shutter LASER close
04:31:05 Received message from Camera: op=State serial=181752
04:31:05 GetSingleValue result=40  Value=cccccccc
04:31:05 SkyScan query
04:31:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:31:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:05 Parameters OK
04:31:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:05 Set A/D data flow result=40
04:31:05 Set A/D channel type result=40
04:31:05 Set A/D encoding result=40
04:31:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:05 Set channel filter=0.000000e+000  result=40
04:31:05 Config A/D  Result=40
04:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:05 Get A/D filter: -9.255963e+061  result=40
04:31:05 Get A/D value=-858993460  result=40
04:31:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:05 Parameters OK
04:31:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:05 Set A/D data flow result=40
04:31:05 Set A/D channel type result=40
04:31:05 Set A/D encoding result=40
04:31:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:05 Set channel filter=0.000000e+000  result=40
04:31:05 Config A/D  Result=40
04:31:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:05 Get A/D filter: -9.255963e+061  result=40
04:31:05 Get A/D value=-858993460  result=40
04:31:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:31:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:31:05 Aux=
04:31:05 Message to Camera, serial 181752 queued
04:31:42 Received message from Master: op=PointingHead serial=181765
04:31:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:31:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:31:43 Point started: ret=0
04:31:43 point_skyscan result=0
04:31:43 Check angles
04:31:43 SkyScan query
04:31:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:31:44 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:31:44 Message to Master queued w/err=0: serial=181765 error=0
04:31:49 Received message from Master: op=Filter serial=181766
04:31:49 Color wheel filter change from 0 to 0
04:31:49 FLIGetFilterPos err=0  currentPosition=0
04:31:49 FLIGetStepsRemaining err=0  RemainingSteps=0
04:31:49 Filter is already there-color wheel unchanged
04:31:49 Received message from Master: op=Shutter serial=181767
04:31:49 Shutter LASER close
04:31:49 Received message from Camera: op=State serial=181769
04:31:49 GetSingleValue result=40  Value=cccccccc
04:31:49 SkyScan query
04:31:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:50 Parameters OK
04:31:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:50 Set A/D data flow result=40
04:31:50 Set A/D channel type result=40
04:31:50 Set A/D encoding result=40
04:31:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:50 Set channel filter=0.000000e+000  result=40
04:31:50 Config A/D  Result=40
04:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:50 Get A/D filter: -9.255963e+061  result=40
04:31:50 Get A/D value=-858993460  result=40
04:31:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:31:50 Parameters OK
04:31:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:31:50 Set A/D data flow result=40
04:31:50 Set A/D channel type result=40
04:31:50 Set A/D encoding result=40
04:31:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:31:50 Set channel filter=0.000000e+000  result=40
04:31:50 Config A/D  Result=40
04:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:31:50 Get A/D filter: -9.255963e+061  result=40
04:31:50 Get A/D value=-858993460  result=40
04:31:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:31:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:31:50 Aux=
04:31:50 Message to Camera, serial 181769 queued
04:32:26 Received message from Master: op=PointingHead serial=181782
04:32:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:32:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:32:27 Point started: ret=0
04:32:27 point_skyscan result=0
04:32:28 Check angles
04:32:28 SkyScan query
04:32:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:32:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:32:28 Message to Master queued w/err=0: serial=181782 error=0
04:32:33 Received message from Master: op=Filter serial=181783
04:32:33 Color wheel filter change from 0 to 0
04:32:33 FLIGetFilterPos err=0  currentPosition=0
04:32:33 FLIGetStepsRemaining err=0  RemainingSteps=0
04:32:33 Filter is already there-color wheel unchanged
04:32:33 Received message from Master: op=Shutter serial=181784
04:32:33 Shutter LASER close
04:32:33 Received message from Camera: op=State serial=181786
04:32:33 GetSingleValue result=40  Value=cccccccc
04:32:33 SkyScan query
04:32:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:32:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:32:34 Parameters OK
04:32:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:32:34 Set A/D data flow result=40
04:32:34 Set A/D channel type result=40
04:32:34 Set A/D encoding result=40
04:32:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:32:34 Set channel filter=0.000000e+000  result=40
04:32:34 Config A/D  Result=40
04:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:32:34 Get A/D filter: -9.255963e+061  result=40
04:32:34 Get A/D value=-858993460  result=40
04:32:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:32:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:32:34 Parameters OK
04:32:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:32:34 Set A/D data flow result=40
04:32:34 Set A/D channel type result=40
04:32:34 Set A/D encoding result=40
04:32:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:32:34 Set channel filter=0.000000e+000  result=40
04:32:34 Config A/D  Result=40
04:32:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:32:34 Get A/D filter: -9.255963e+061  result=40
04:32:34 Get A/D value=-858993460  result=40
04:32:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:32:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:32:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:32:34 Aux=
04:32:34 Message to Camera, serial 181786 queued
04:33:11 Received message from Master: op=PointingHead serial=181799
04:33:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:33:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:33:11 Point started: ret=0
04:33:11 point_skyscan result=0
04:33:12 Check angles
04:33:12 SkyScan query
04:33:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:33:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:33:12 Message to Master queued w/err=0: serial=181799 error=0
04:33:17 Received message from Master: op=Filter serial=181800
04:33:17 Color wheel filter change from 0 to 0
04:33:17 FLIGetFilterPos err=0  currentPosition=0
04:33:17 FLIGetStepsRemaining err=0  RemainingSteps=0
04:33:17 Filter is already there-color wheel unchanged
04:33:18 Received message from Master: op=Shutter serial=181801
04:33:18 Shutter LASER close
04:33:18 Received message from Camera: op=State serial=181803
04:33:18 GetSingleValue result=40  Value=cccccccc
04:33:18 SkyScan query
04:33:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:33:18 Parameters OK
04:33:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:33:18 Set A/D data flow result=40
04:33:18 Set A/D channel type result=40
04:33:18 Set A/D encoding result=40
04:33:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:33:18 Set channel filter=0.000000e+000  result=40
04:33:18 Config A/D  Result=40
04:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:33:18 Get A/D filter: -9.255963e+061  result=40
04:33:18 Get A/D value=-858993460  result=40
04:33:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:33:18 Parameters OK
04:33:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:33:18 Set A/D data flow result=40
04:33:18 Set A/D channel type result=40
04:33:18 Set A/D encoding result=40
04:33:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:33:18 Set channel filter=0.000000e+000  result=40
04:33:18 Config A/D  Result=40
04:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:33:18 Get A/D filter: -9.255963e+061  result=40
04:33:18 Get A/D value=-858993460  result=40
04:33:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:33:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:33:18 Aux=
04:33:18 Message to Camera, serial 181803 queued
04:33:36 Received message from Master: op=Identify serial=181804
04:33:55 Received message from Master: op=PointingHead serial=181819
04:33:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:33:55 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:33:55 Point started: ret=0
04:33:55 point_skyscan result=0
04:33:56 Check angles
04:33:56 SkyScan query
04:33:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
04:33:57 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
04:33:57 Check angles
04:33:57 SkyScan query
04:33:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.995<-14933  Statuses=0008 0009
04:33:57 Msec=750  True Az=112.995  Ze=-43.995  Az status=0008  Ze status=0009
04:33:58 Check angles
04:33:58 SkyScan query
04:33:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.4<-16360  Statuses=0008 0009
04:33:58 Msec=1500  True Az=112.995  Ze=-65.4  Az status=0008  Ze status=0009
04:33:58 Check angles
04:33:58 SkyScan query
04:33:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
04:33:59 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
04:33:59 Check angles
04:33:59 SkyScan query
04:34:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.73<-19182  Statuses=0008 0009
04:34:00 Msec=3000  True Az=112.995  Ze=-107.73  Az status=0008  Ze status=0009
04:34:00 Check angles
04:34:00 SkyScan query
04:34:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.12<-20608  Statuses=0008 0009
04:34:01 Msec=3750  True Az=112.995  Ze=-129.12  Az status=0008  Ze status=0009
04:34:01 Check angles
04:34:01 SkyScan query
04:34:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.48<-22032  Statuses=0008 0009
04:34:01 Msec=4500  True Az=112.995  Ze=-150.48  Az status=0008  Ze status=0009
04:34:01 Check angles
04:34:01 SkyScan query
04:34:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.24<-23416  Statuses=0008 0009
04:34:02 Msec=5250  True Az=112.995  Ze=-171.24  Az status=0008  Ze status=0009
04:34:02 Check angles
04:34:02 SkyScan query
04:34:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:34:03 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:34:03 Message to Master queued w/err=0: serial=181819 error=0
04:34:08 Received message from Master: op=Filter serial=181820
04:34:08 Color wheel filter change from 0 to 0
04:34:08 FLIGetFilterPos err=0  currentPosition=0
04:34:08 FLIGetStepsRemaining err=0  RemainingSteps=0
04:34:08 Filter is already there-color wheel unchanged
04:34:08 Received message from Master: op=Shutter serial=181821
04:34:08 Shutter LASER open
04:34:08 Received message from Camera: op=State serial=181823
04:34:08 GetSingleValue result=40  Value=cccccccc
04:34:08 SkyScan query
04:34:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:34:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:09 Parameters OK
04:34:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:09 Set A/D data flow result=40
04:34:09 Set A/D channel type result=40
04:34:09 Set A/D encoding result=40
04:34:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:09 Set channel filter=0.000000e+000  result=40
04:34:09 Config A/D  Result=40
04:34:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:09 Get A/D filter: -9.255963e+061  result=40
04:34:09 Get A/D value=-858993460  result=40
04:34:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:09 Parameters OK
04:34:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:09 Set A/D data flow result=40
04:34:09 Set A/D channel type result=40
04:34:09 Set A/D encoding result=40
04:34:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:09 Set channel filter=0.000000e+000  result=40
04:34:09 Config A/D  Result=40
04:34:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:09 Get A/D filter: -9.255963e+061  result=40
04:34:09 Get A/D value=-858993460  result=40
04:34:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:34:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:34:09 Aux=
04:34:09 Message to Camera, serial 181823 queued
04:34:17 Received message from Master: op=Shutter serial=181833
04:34:17 Shutter LASER close
04:34:18 Received message from Master: op=PointingHead serial=181837
04:34:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:34:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:34:18 Point started: ret=0
04:34:18 point_skyscan result=0
04:34:19 Check angles
04:34:19 SkyScan query
04:34:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
04:34:19 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
[UTC 2019-3-9  04:34:20]
04:34:20 Check angles
04:34:20 SkyScan query
04:34:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-120.285<-20019  Statuses=0008 0009
04:34:20 Msec=750  True Az=112.995  Ze=-120.285  Az status=0008  Ze status=0009
04:34:20 Check angles
04:34:20 SkyScan query
04:34:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.07<-18738  Statuses=0008 0009
04:34:21 Msec=1500  True Az=112.995  Ze=-101.07  Az status=0008  Ze status=0009
04:34:21 Check angles
04:34:21 SkyScan query
04:34:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.1<-17340  Statuses=0008 0009
04:34:22 Msec=2250  True Az=112.995  Ze=-80.1  Az status=0008  Ze status=0009
04:34:22 Check angles
04:34:22 SkyScan query
04:34:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.175<-15945  Statuses=0008 0009
04:34:23 Msec=3000  True Az=112.995  Ze=-59.175  Az status=0008  Ze status=0009
04:34:23 Check angles
04:34:23 SkyScan query
04:34:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.19<-14546  Statuses=0008 0009
04:34:23 Msec=3750  True Az=112.995  Ze=-38.19  Az status=0008  Ze status=0009
04:34:23 Check angles
04:34:23 SkyScan query
04:34:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
04:34:24 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
04:34:24 Check angles
04:34:24 SkyScan query
04:34:25 SkyScan query done: ret=0  az=112.995<-7533  ze=3.705<-11753  Statuses=0008 0009
04:34:25 Msec=5250  True Az=112.995  Ze=3.705  Az status=0008  Ze status=0009
04:34:25 Check angles
04:34:25 SkyScan query
04:34:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:34:26 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:34:26 Message to Master queued w/err=0: serial=181837 error=0
04:34:31 Received message from Master: op=Filter serial=181838
04:34:31 Color wheel filter change from 0 to 0
04:34:31 FLIGetFilterPos err=0  currentPosition=0
04:34:31 FLIGetStepsRemaining err=0  RemainingSteps=0
04:34:31 Filter is already there-color wheel unchanged
04:34:31 Received message from Master: op=Shutter serial=181839
04:34:31 Shutter LASER close
04:34:31 Received message from Camera: op=State serial=181841
04:34:31 GetSingleValue result=40  Value=cccccccc
04:34:31 SkyScan query
04:34:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:34:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:31 Parameters OK
04:34:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:31 Set A/D data flow result=40
04:34:31 Set A/D channel type result=40
04:34:31 Set A/D encoding result=40
04:34:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:31 Set channel filter=0.000000e+000  result=40
04:34:31 Config A/D  Result=40
04:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:31 Get A/D filter: -9.255963e+061  result=40
04:34:31 Get A/D value=-858993460  result=40
04:34:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:34:31 Parameters OK
04:34:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:34:31 Set A/D data flow result=40
04:34:31 Set A/D channel type result=40
04:34:31 Set A/D encoding result=40
04:34:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:34:31 Set channel filter=0.000000e+000  result=40
04:34:31 Config A/D  Result=40
04:34:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:34:31 Get A/D filter: -9.255963e+061  result=40
04:34:31 Get A/D value=-858993460  result=40
04:34:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:34:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:34:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:34:31 Aux=
04:34:31 Message to Camera, serial 181841 queued
04:35:08 Received message from Master: op=PointingHead serial=181854
04:35:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:35:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:35:09 Point started: ret=0
04:35:09 point_skyscan result=0
04:35:09 Check angles
04:35:09 SkyScan query
04:35:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:35:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:35:10 Message to Master queued w/err=0: serial=181854 error=0
04:35:15 Received message from Master: op=Filter serial=181855
04:35:15 Color wheel filter change from 0 to 0
04:35:15 FLIGetFilterPos err=0  currentPosition=0
04:35:15 FLIGetStepsRemaining err=0  RemainingSteps=0
04:35:15 Filter is already there-color wheel unchanged
04:35:15 Received message from Master: op=Shutter serial=181856
04:35:15 Shutter LASER close
04:35:15 Received message from Camera: op=State serial=181858
04:35:15 GetSingleValue result=40  Value=cccccccc
04:35:15 SkyScan query
04:35:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:35:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:35:16 Parameters OK
04:35:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:35:16 Set A/D data flow result=40
04:35:16 Set A/D channel type result=40
04:35:16 Set A/D encoding result=40
04:35:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:35:16 Set channel filter=0.000000e+000  result=40
04:35:16 Config A/D  Result=40
04:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:35:16 Get A/D filter: -9.255963e+061  result=40
04:35:16 Get A/D value=-858993460  result=40
04:35:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:35:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:35:16 Parameters OK
04:35:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:35:16 Set A/D data flow result=40
04:35:16 Set A/D channel type result=40
04:35:16 Set A/D encoding result=40
04:35:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:35:16 Set channel filter=0.000000e+000  result=40
04:35:16 Config A/D  Result=40
04:35:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:35:16 Get A/D filter: -9.255963e+061  result=40
04:35:16 Get A/D value=-858993460  result=40
04:35:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:35:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:35:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:35:16 Aux=
04:35:16 Message to Camera, serial 181858 queued
04:35:53 Received message from Master: op=PointingHead serial=181871
04:35:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:35:53 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:35:53 Point started: ret=0
04:35:53 point_skyscan result=0
04:35:54 Check angles
04:35:54 SkyScan query
04:35:54 SkyScan query done: ret=0  az=136.38<-9092  ze=-6.495<-12433  Statuses=0009 0008
04:35:54 Msec=0  True Az=136.38  Ze=-6.495  Az status=0009  Ze status=0008
04:35:54 Check angles
04:35:54 SkyScan query
04:35:55 SkyScan query done: ret=0  az=154.215<-10281  ze=-6.48<-12432  Statuses=0009 0008
04:35:55 Msec=750  True Az=154.215  Ze=-6.48  Az status=0009  Ze status=0008
04:35:55 Check angles
04:35:55 SkyScan query
04:35:56 SkyScan query done: ret=0  az=171.75<-11450  ze=-6.48<-12432  Statuses=0009 0008
04:35:56 Msec=1500  True Az=171.75  Ze=-6.48  Az status=0009  Ze status=0008
04:35:56 Check angles
04:35:56 SkyScan query
04:35:57 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:35:57 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:35:57 Message to Master queued w/err=0: serial=181871 error=0
04:36:02 Received message from Master: op=Filter serial=181872
04:36:02 Color wheel filter change from 0 to 0
04:36:02 FLIGetFilterPos err=0  currentPosition=0
04:36:02 FLIGetStepsRemaining err=0  RemainingSteps=0
04:36:02 Filter is already there-color wheel unchanged
04:36:02 Received message from Master: op=Shutter serial=181873
04:36:02 Shutter LASER close
04:36:02 Received message from Camera: op=State serial=181875
04:36:02 GetSingleValue result=40  Value=cccccccc
04:36:02 SkyScan query
04:36:02 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:36:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:36:02 Parameters OK
04:36:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:36:02 Set A/D data flow result=40
04:36:02 Set A/D channel type result=40
04:36:02 Set A/D encoding result=40
04:36:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:36:02 Set channel filter=0.000000e+000  result=40
04:36:02 Config A/D  Result=40
04:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:36:02 Get A/D filter: -9.255963e+061  result=40
04:36:02 Get A/D value=-858993460  result=40
04:36:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:36:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:36:02 Parameters OK
04:36:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:36:02 Set A/D data flow result=40
04:36:02 Set A/D channel type result=40
04:36:02 Set A/D encoding result=40
04:36:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:36:02 Set channel filter=0.000000e+000  result=40
04:36:02 Config A/D  Result=40
04:36:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:36:02 Get A/D filter: -9.255963e+061  result=40
04:36:02 Get A/D value=-858993460  result=40
04:36:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:36:02 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:36:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:36:02 Aux=
04:36:02 Message to Camera, serial 181875 queued
04:36:39 Received message from Master: op=PointingHead serial=181888
04:36:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:36:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:36:40 Point started: ret=0
04:36:40 point_skyscan result=0
04:36:40 Check angles
04:36:40 SkyScan query
04:36:41 SkyScan query done: ret=0  az=152.58<-10172  ze=6.51<-11566  Statuses=0009 0008
04:36:41 Msec=0  True Az=152.58  Ze=6.51  Az status=0009  Ze status=0008
04:36:41 Check angles
04:36:41 SkyScan query
04:36:42 SkyScan query done: ret=0  az=135.12<-9008  ze=6.495<-11567  Statuses=0009 0008
04:36:42 Msec=750  True Az=135.12  Ze=6.495  Az status=0009  Ze status=0008
04:36:42 Check angles
04:36:42 SkyScan query
04:36:42 SkyScan query done: ret=0  az=117.315<-7821  ze=6.495<-11567  Statuses=0009 0008
04:36:42 Msec=1500  True Az=117.315  Ze=6.495  Az status=0009  Ze status=0008
04:36:43 Check angles
04:36:43 SkyScan query
04:36:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:36:43 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:36:43 Message to Master queued w/err=0: serial=181888 error=0
04:36:48 Received message from Master: op=Filter serial=181889
04:36:48 Color wheel filter change from 0 to 0
04:36:48 FLIGetFilterPos err=0  currentPosition=0
04:36:48 FLIGetStepsRemaining err=0  RemainingSteps=0
04:36:48 Filter is already there-color wheel unchanged
04:36:48 Received message from Master: op=Shutter serial=181890
04:36:48 Shutter LASER close
04:36:48 Received message from Camera: op=State serial=181892
04:36:48 GetSingleValue result=40  Value=cccccccc
04:36:48 SkyScan query
04:36:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:36:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:36:49 Parameters OK
04:36:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:36:49 Set A/D data flow result=40
04:36:49 Set A/D channel type result=40
04:36:49 Set A/D encoding result=40
04:36:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:36:49 Set channel filter=0.000000e+000  result=40
04:36:49 Config A/D  Result=40
04:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:36:49 Get A/D filter: -9.255963e+061  result=40
04:36:49 Get A/D value=-858993460  result=40
04:36:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:36:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:36:49 Parameters OK
04:36:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:36:49 Set A/D data flow result=40
04:36:49 Set A/D channel type result=40
04:36:49 Set A/D encoding result=40
04:36:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:36:49 Set channel filter=0.000000e+000  result=40
04:36:49 Config A/D  Result=40
04:36:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:36:49 Get A/D filter: -9.255963e+061  result=40
04:36:49 Get A/D value=-858993460  result=40
04:36:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:36:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:36:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:36:49 Aux=
04:36:49 Message to Camera, serial 181892 queued
04:37:26 Received message from Master: op=PointingHead serial=181905
04:37:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:37:26 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:37:26 Point started: ret=0
04:37:26 point_skyscan result=0
04:37:27 Check angles
04:37:27 SkyScan query
04:37:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.205<-13547  Statuses=0008 0009
04:37:27 Msec=0  True Az=112.995  Ze=-23.205  Az status=0008  Ze status=0009
04:37:28 Check angles
04:37:28 SkyScan query
04:37:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.175<-14945  Statuses=0008 0009
04:37:28 Msec=750  True Az=112.995  Ze=-44.175  Az status=0008  Ze status=0009
04:37:28 Check angles
04:37:28 SkyScan query
04:37:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.16<-16344  Statuses=0008 0009
04:37:29 Msec=1500  True Az=112.995  Ze=-65.16  Az status=0008  Ze status=0009
04:37:29 Check angles
04:37:29 SkyScan query
04:37:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.115<-17741  Statuses=0008 0009
04:37:30 Msec=2250  True Az=112.995  Ze=-86.115  Az status=0008  Ze status=0009
04:37:30 Check angles
04:37:30 SkyScan query
04:37:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.055<-19137  Statuses=0008 0009
04:37:30 Msec=3000  True Az=112.995  Ze=-107.055  Az status=0008  Ze status=0009
04:37:31 Check angles
04:37:31 SkyScan query
04:37:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.01<-20534  Statuses=0008 0009
04:37:31 Msec=3750  True Az=112.995  Ze=-128.01  Az status=0008  Ze status=0009
04:37:31 Check angles
04:37:31 SkyScan query
04:37:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.965<-21931  Statuses=0008 0009
04:37:32 Msec=4500  True Az=112.995  Ze=-148.965  Az status=0008  Ze status=0009
04:37:32 Check angles
04:37:32 SkyScan query
04:37:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.905<-23327  Statuses=0008 0009
04:37:33 Msec=5250  True Az=112.995  Ze=-169.905  Az status=0008  Ze status=0009
04:37:33 Check angles
04:37:33 SkyScan query
04:37:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:37:33 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:37:33 Message to Master queued w/err=0: serial=181905 error=0
04:37:38 Received message from Master: op=Filter serial=181906
04:37:38 Color wheel filter change from 0 to 0
04:37:38 FLIGetFilterPos err=0  currentPosition=0
04:37:38 FLIGetStepsRemaining err=0  RemainingSteps=0
04:37:38 Filter is already there-color wheel unchanged
04:37:39 Received message from Master: op=Shutter serial=181907
04:37:39 Shutter LASER open
04:37:39 Received message from Camera: op=State serial=181909
04:37:39 GetSingleValue result=40  Value=cccccccc
04:37:39 SkyScan query
04:37:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:37:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:37:39 Parameters OK
04:37:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:37:39 Set A/D data flow result=40
04:37:39 Set A/D channel type result=40
04:37:39 Set A/D encoding result=40
04:37:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:37:39 Set channel filter=0.000000e+000  result=40
04:37:39 Config A/D  Result=40
04:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:37:39 Get A/D filter: -9.255963e+061  result=40
04:37:39 Get A/D value=-858993460  result=40
04:37:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:37:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:37:39 Parameters OK
04:37:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:37:39 Set A/D data flow result=40
04:37:39 Set A/D channel type result=40
04:37:39 Set A/D encoding result=40
04:37:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:37:39 Set channel filter=0.000000e+000  result=40
04:37:39 Config A/D  Result=40
04:37:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:37:39 Get A/D filter: -9.255963e+061  result=40
04:37:39 Get A/D value=-858993460  result=40
04:37:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:37:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:37:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:37:39 Aux=
04:37:39 Message to Camera, serial 181909 queued
04:37:48 Received message from Master: op=Shutter serial=181919
04:37:48 Shutter LASER close
04:37:48 Received message from Master: op=PointingHead serial=181923
04:37:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:37:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:37:49 Point started: ret=0
04:37:49 point_skyscan result=0
04:37:49 Check angles
04:37:49 SkyScan query
04:37:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
04:37:50 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
04:37:50 Check angles
04:37:50 SkyScan query
04:37:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.295<-20153  Statuses=0008 0009
04:37:51 Msec=750  True Az=112.995  Ze=-122.295  Az status=0008  Ze status=0009
04:37:51 Check angles
04:37:51 SkyScan query
04:37:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.34<-18756  Statuses=0008 0009
04:37:51 Msec=1500  True Az=112.995  Ze=-101.34  Az status=0008  Ze status=0009
04:37:52 Check angles
04:37:52 SkyScan query
04:37:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.37<-17358  Statuses=0008 0009
04:37:52 Msec=2250  True Az=112.995  Ze=-80.37  Az status=0008  Ze status=0009
04:37:52 Check angles
04:37:52 SkyScan query
04:37:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.43<-15962  Statuses=0008 0009
04:37:53 Msec=3000  True Az=112.995  Ze=-59.43  Az status=0008  Ze status=0009
04:37:53 Check angles
04:37:53 SkyScan query
04:37:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.445<-14563  Statuses=0008 0009
04:37:54 Msec=3750  True Az=112.995  Ze=-38.445  Az status=0008  Ze status=0009
04:37:54 Check angles
04:37:54 SkyScan query
04:37:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.505<-13167  Statuses=0008 0009
04:37:54 Msec=4500  True Az=112.995  Ze=-17.505  Az status=0008  Ze status=0009
04:37:55 Check angles
04:37:55 SkyScan query
04:37:55 SkyScan query done: ret=0  az=112.995<-7533  ze=3.45<-11770  Statuses=0008 0009
04:37:55 Msec=5250  True Az=112.995  Ze=3.45  Az status=0008  Ze status=0009
04:37:55 Check angles
04:37:55 SkyScan query
04:37:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:37:56 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:37:56 Message to Master queued w/err=0: serial=181923 error=0
04:38:01 Received message from Master: op=Filter serial=181924
04:38:01 Color wheel filter change from 0 to 0
04:38:01 FLIGetFilterPos err=0  currentPosition=0
04:38:01 FLIGetStepsRemaining err=0  RemainingSteps=0
04:38:01 Filter is already there-color wheel unchanged
04:38:01 Received message from Master: op=Shutter serial=181925
04:38:01 Shutter LASER close
04:38:01 Received message from Camera: op=State serial=181927
04:38:01 GetSingleValue result=40  Value=cccccccc
04:38:01 SkyScan query
04:38:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:38:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:02 Parameters OK
04:38:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:02 Set A/D data flow result=40
04:38:02 Set A/D channel type result=40
04:38:02 Set A/D encoding result=40
04:38:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:02 Set channel filter=0.000000e+000  result=40
04:38:02 Config A/D  Result=40
04:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:02 Get A/D filter: -9.255963e+061  result=40
04:38:02 Get A/D value=-858993460  result=40
04:38:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:02 Parameters OK
04:38:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:02 Set A/D data flow result=40
04:38:02 Set A/D channel type result=40
04:38:02 Set A/D encoding result=40
04:38:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:02 Set channel filter=0.000000e+000  result=40
04:38:02 Config A/D  Result=40
04:38:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:02 Get A/D filter: -9.255963e+061  result=40
04:38:02 Get A/D value=-858993460  result=40
04:38:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:38:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:38:02 Aux=
04:38:02 Message to Camera, serial 181927 queued
04:38:39 Received message from Master: op=PointingHead serial=181940
04:38:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:38:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:38:39 Point started: ret=0
04:38:39 point_skyscan result=0
04:38:40 Check angles
04:38:40 SkyScan query
04:38:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:38:40 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:38:40 Message to Master queued w/err=0: serial=181940 error=0
04:38:45 Received message from Master: op=Filter serial=181941
04:38:45 Color wheel filter change from 0 to 0
04:38:45 FLIGetFilterPos err=0  currentPosition=0
04:38:45 FLIGetStepsRemaining err=0  RemainingSteps=0
04:38:45 Filter is already there-color wheel unchanged
04:38:46 Received message from Master: op=Shutter serial=181942
04:38:46 Shutter LASER close
04:38:46 Received message from Camera: op=State serial=181944
04:38:46 GetSingleValue result=40  Value=cccccccc
04:38:46 SkyScan query
04:38:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:38:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:46 Parameters OK
04:38:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:46 Set A/D data flow result=40
04:38:46 Set A/D channel type result=40
04:38:46 Set A/D encoding result=40
04:38:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:46 Set channel filter=0.000000e+000  result=40
04:38:46 Config A/D  Result=40
04:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:46 Get A/D filter: -9.255963e+061  result=40
04:38:46 Get A/D value=-858993460  result=40
04:38:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:38:46 Parameters OK
04:38:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:38:46 Set A/D data flow result=40
04:38:46 Set A/D channel type result=40
04:38:46 Set A/D encoding result=40
04:38:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:38:46 Set channel filter=0.000000e+000  result=40
04:38:46 Config A/D  Result=40
04:38:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:38:46 Get A/D filter: -9.255963e+061  result=40
04:38:46 Get A/D value=-858993460  result=40
04:38:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:38:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:38:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:38:46 Aux=
04:38:46 Message to Camera, serial 181944 queued
04:39:23 Received message from Master: op=PointingHead serial=181957
04:39:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:39:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:39:23 Point started: ret=0
04:39:23 point_skyscan result=0
04:39:24 Check angles
04:39:24 SkyScan query
04:39:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:39:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:39:25 Message to Master queued w/err=0: serial=181957 error=0
04:39:30 Received message from Master: op=Filter serial=181958
04:39:30 Color wheel filter change from 0 to 0
04:39:30 FLIGetFilterPos err=0  currentPosition=0
04:39:30 FLIGetStepsRemaining err=0  RemainingSteps=0
04:39:30 Filter is already there-color wheel unchanged
04:39:30 Received message from Master: op=Shutter serial=181959
04:39:30 Shutter LASER close
04:39:30 Received message from Camera: op=State serial=181961
04:39:30 GetSingleValue result=40  Value=cccccccc
04:39:30 SkyScan query
04:39:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:39:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:39:31 Parameters OK
04:39:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:39:31 Set A/D data flow result=40
04:39:31 Set A/D channel type result=40
04:39:31 Set A/D encoding result=40
04:39:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:39:31 Set channel filter=0.000000e+000  result=40
04:39:31 Config A/D  Result=40
04:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:39:31 Get A/D filter: -9.255963e+061  result=40
04:39:31 Get A/D value=-858993460  result=40
04:39:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:39:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:39:31 Parameters OK
04:39:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:39:31 Set A/D data flow result=40
04:39:31 Set A/D channel type result=40
04:39:31 Set A/D encoding result=40
04:39:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:39:31 Set channel filter=0.000000e+000  result=40
04:39:31 Config A/D  Result=40
04:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:39:31 Get A/D filter: -9.255963e+061  result=40
04:39:31 Get A/D value=-858993460  result=40
04:39:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:39:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:39:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:39:31 Aux=
04:39:31 Message to Camera, serial 181961 queued
04:40:07 Received message from Master: op=PointingHead serial=181974
04:40:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:40:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:40:08 Point started: ret=0
04:40:08 point_skyscan result=0
04:40:08 Check angles
04:40:08 SkyScan query
04:40:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:40:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:40:09 Message to Master queued w/err=0: serial=181974 error=0
04:40:14 Received message from Master: op=Filter serial=181975
04:40:14 Color wheel filter change from 0 to 0
04:40:14 FLIGetFilterPos err=0  currentPosition=0
04:40:14 FLIGetStepsRemaining err=0  RemainingSteps=0
04:40:14 Filter is already there-color wheel unchanged
04:40:14 Received message from Master: op=Shutter serial=181976
04:40:14 Shutter LASER close
04:40:14 Received message from Camera: op=State serial=181978
04:40:14 GetSingleValue result=40  Value=cccccccc
04:40:14 SkyScan query
04:40:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:40:15 Parameters OK
04:40:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:40:15 Set A/D data flow result=40
04:40:15 Set A/D channel type result=40
04:40:15 Set A/D encoding result=40
04:40:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:40:15 Set channel filter=0.000000e+000  result=40
04:40:15 Config A/D  Result=40
04:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:40:15 Get A/D filter: -9.255963e+061  result=40
04:40:15 Get A/D value=-858993460  result=40
04:40:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:40:15 Parameters OK
04:40:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:40:15 Set A/D data flow result=40
04:40:15 Set A/D channel type result=40
04:40:15 Set A/D encoding result=40
04:40:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:40:15 Set channel filter=0.000000e+000  result=40
04:40:15 Config A/D  Result=40
04:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:40:15 Get A/D filter: -9.255963e+061  result=40
04:40:15 Get A/D value=-858993460  result=40
04:40:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:40:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:40:15 Aux=
04:40:15 Message to Camera, serial 181978 queued
04:40:52 Received message from Master: op=PointingHead serial=181991
04:40:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:40:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:40:52 Point started: ret=0
04:40:52 point_skyscan result=0
04:40:53 Check angles
04:40:53 SkyScan query
04:40:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
04:40:53 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
04:40:54 Check angles
04:40:54 SkyScan query
04:40:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.805<-14987  Statuses=0008 0009
04:40:54 Msec=750  True Az=112.995  Ze=-44.805  Az status=0008  Ze status=0009
04:40:54 Check angles
04:40:54 SkyScan query
04:40:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.195<-16413  Statuses=0008 0009
04:40:55 Msec=1500  True Az=112.995  Ze=-66.195  Az status=0008  Ze status=0009
04:40:55 Check angles
04:40:55 SkyScan query
04:40:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.12<-17808  Statuses=0008 0009
04:40:56 Msec=2250  True Az=112.995  Ze=-87.12  Az status=0008  Ze status=0009
04:40:56 Check angles
04:40:56 SkyScan query
04:40:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.075<-19205  Statuses=0008 0009
04:40:56 Msec=3000  True Az=112.995  Ze=-108.075  Az status=0008  Ze status=0009
04:40:57 Check angles
04:40:57 SkyScan query
04:40:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.465<-20631  Statuses=0008 0009
04:40:57 Msec=3750  True Az=112.995  Ze=-129.465  Az status=0008  Ze status=0009
04:40:57 Check angles
04:40:57 SkyScan query
04:40:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.42<-22028  Statuses=0008 0009
04:40:58 Msec=4500  True Az=112.995  Ze=-150.42  Az status=0008  Ze status=0009
04:40:58 Check angles
04:40:58 SkyScan query
04:40:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.195<-23413  Statuses=0008 0009
04:40:59 Msec=5250  True Az=112.995  Ze=-171.195  Az status=0008  Ze status=0009
04:40:59 Check angles
04:40:59 SkyScan query
04:40:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:40:59 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:40:59 Message to Master queued w/err=0: serial=181991 error=0
04:41:04 Received message from Master: op=Filter serial=181992
04:41:04 Color wheel filter change from 0 to 0
04:41:04 FLIGetFilterPos err=0  currentPosition=0
04:41:04 FLIGetStepsRemaining err=0  RemainingSteps=0
04:41:04 Filter is already there-color wheel unchanged
04:41:05 Received message from Master: op=Shutter serial=181993
04:41:05 Shutter LASER open
04:41:05 Received message from Camera: op=State serial=181995
04:41:05 GetSingleValue result=40  Value=cccccccc
04:41:05 SkyScan query
04:41:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:41:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:05 Parameters OK
04:41:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:05 Set A/D data flow result=40
04:41:05 Set A/D channel type result=40
04:41:05 Set A/D encoding result=40
04:41:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:05 Set channel filter=0.000000e+000  result=40
04:41:05 Config A/D  Result=40
04:41:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:05 Get A/D filter: -9.255963e+061  result=40
04:41:05 Get A/D value=-858993460  result=40
04:41:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:05 Parameters OK
04:41:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:05 Set A/D data flow result=40
04:41:05 Set A/D channel type result=40
04:41:05 Set A/D encoding result=40
04:41:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:05 Set channel filter=0.000000e+000  result=40
04:41:05 Config A/D  Result=40
04:41:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:05 Get A/D filter: -9.255963e+061  result=40
04:41:05 Get A/D value=-858993460  result=40
04:41:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:41:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:41:05 Aux=
04:41:05 Message to Camera, serial 181995 queued
04:41:14 Received message from Master: op=Shutter serial=182005
04:41:14 Shutter LASER close
04:41:14 Received message from Master: op=PointingHead serial=182009
04:41:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:41:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:41:15 Point started: ret=0
04:41:15 point_skyscan result=0
04:41:15 Check angles
04:41:15 SkyScan query
04:41:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
04:41:16 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
04:41:16 Check angles
04:41:16 SkyScan query
04:41:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.77<-20118  Statuses=0008 0009
04:41:17 Msec=750  True Az=112.995  Ze=-121.77  Az status=0008  Ze status=0009
04:41:17 Check angles
04:41:17 SkyScan query
04:41:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.83<-18722  Statuses=0008 0009
04:41:18 Msec=1500  True Az=112.995  Ze=-100.83  Az status=0008  Ze status=0009
04:41:18 Check angles
04:41:18 SkyScan query
04:41:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.875<-17325  Statuses=0008 0009
04:41:18 Msec=2250  True Az=112.995  Ze=-79.875  Az status=0008  Ze status=0009
04:41:18 Check angles
04:41:18 SkyScan query
04:41:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.47<-15898  Statuses=0008 0009
04:41:19 Msec=3000  True Az=112.995  Ze=-58.47  Az status=0008  Ze status=0009
04:41:19 Check angles
04:41:19 SkyScan query
04:41:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.53<-14502  Statuses=0008 0009
04:41:20 Msec=3750  True Az=112.995  Ze=-37.53  Az status=0008  Ze status=0009
04:41:20 Check angles
04:41:20 SkyScan query
04:41:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.56<-13104  Statuses=0008 0009
04:41:21 Msec=4500  True Az=112.995  Ze=-16.56  Az status=0008  Ze status=0009
04:41:21 Check angles
04:41:21 SkyScan query
04:41:21 SkyScan query done: ret=0  az=112.995<-7533  ze=4.335<-11711  Statuses=0008 0009
04:41:21 Msec=5250  True Az=112.995  Ze=4.335  Az status=0008  Ze status=0009
04:41:21 Check angles
04:41:21 SkyScan query
04:41:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:41:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:41:22 Message to Master queued w/err=0: serial=182009 error=0
04:41:27 Received message from Master: op=Filter serial=182010
04:41:27 Color wheel filter change from 0 to 0
04:41:27 FLIGetFilterPos err=0  currentPosition=0
04:41:27 FLIGetStepsRemaining err=0  RemainingSteps=0
04:41:27 Filter is already there-color wheel unchanged
04:41:27 Received message from Master: op=Shutter serial=182011
04:41:27 Shutter LASER close
04:41:27 Received message from Camera: op=State serial=182013
04:41:27 GetSingleValue result=40  Value=cccccccc
04:41:27 SkyScan query
04:41:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:41:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:28 Parameters OK
04:41:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:28 Set A/D data flow result=40
04:41:28 Set A/D channel type result=40
04:41:28 Set A/D encoding result=40
04:41:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:28 Set channel filter=0.000000e+000  result=40
04:41:28 Config A/D  Result=40
04:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:28 Get A/D filter: -9.255963e+061  result=40
04:41:28 Get A/D value=-858993460  result=40
04:41:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:41:28 Parameters OK
04:41:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:41:28 Set A/D data flow result=40
04:41:28 Set A/D channel type result=40
04:41:28 Set A/D encoding result=40
04:41:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:41:28 Set channel filter=0.000000e+000  result=40
04:41:28 Config A/D  Result=40
04:41:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:41:28 Get A/D filter: -9.255963e+061  result=40
04:41:28 Get A/D value=-858993460  result=40
04:41:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:41:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:41:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:41:28 Aux=
04:41:28 Message to Camera, serial 182013 queued
04:42:05 Received message from Master: op=PointingHead serial=182026
04:42:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:42:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:42:05 Point started: ret=0
04:42:05 point_skyscan result=0
04:42:06 Check angles
04:42:06 SkyScan query
04:42:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:42:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:42:06 Message to Master queued w/err=0: serial=182026 error=0
04:42:11 Received message from Master: op=Filter serial=182027
04:42:11 Color wheel filter change from 0 to 0
04:42:11 FLIGetFilterPos err=0  currentPosition=0
04:42:11 FLIGetStepsRemaining err=0  RemainingSteps=0
04:42:11 Filter is already there-color wheel unchanged
04:42:12 Received message from Master: op=Shutter serial=182028
04:42:12 Shutter LASER close
04:42:12 Received message from Camera: op=State serial=182030
04:42:12 GetSingleValue result=40  Value=cccccccc
04:42:12 SkyScan query
04:42:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:42:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:42:12 Parameters OK
04:42:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:42:12 Set A/D data flow result=40
04:42:12 Set A/D channel type result=40
04:42:12 Set A/D encoding result=40
04:42:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:42:12 Set channel filter=0.000000e+000  result=40
04:42:12 Config A/D  Result=40
04:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:42:12 Get A/D filter: -9.255963e+061  result=40
04:42:12 Get A/D value=-858993460  result=40
04:42:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:42:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:42:12 Parameters OK
04:42:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:42:12 Set A/D data flow result=40
04:42:12 Set A/D channel type result=40
04:42:12 Set A/D encoding result=40
04:42:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:42:12 Set channel filter=0.000000e+000  result=40
04:42:12 Config A/D  Result=40
04:42:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:42:12 Get A/D filter: -9.255963e+061  result=40
04:42:12 Get A/D value=-858993460  result=40
04:42:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:42:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:42:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:42:12 Aux=
04:42:12 Message to Camera, serial 182030 queued
04:42:49 Received message from Master: op=PointingHead serial=182043
04:42:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:42:49 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:42:49 Point started: ret=0
04:42:49 point_skyscan result=0
04:42:50 Check angles
04:42:50 SkyScan query
04:42:51 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.495<-12433  Statuses=0009 0008
04:42:51 Msec=0  True Az=135.915  Ze=-6.495  Az status=0009  Ze status=0008
04:42:51 Check angles
04:42:51 SkyScan query
04:42:52 SkyScan query done: ret=0  az=153.405<-10227  ze=-6.48<-12432  Statuses=0009 0008
04:42:52 Msec=750  True Az=153.405  Ze=-6.48  Az status=0009  Ze status=0008
04:42:52 Check angles
04:42:52 SkyScan query
04:42:52 SkyScan query done: ret=0  az=170.835<-11389  ze=-6.48<-12432  Statuses=0009 0008
04:42:52 Msec=1500  True Az=170.835  Ze=-6.48  Az status=0009  Ze status=0008
04:42:52 Check angles
04:42:52 SkyScan query
04:42:53 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:42:53 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:42:53 Message to Master queued w/err=0: serial=182043 error=0
04:42:58 Received message from Master: op=Filter serial=182044
04:42:58 Color wheel filter change from 0 to 0
04:42:58 FLIGetFilterPos err=0  currentPosition=0
04:42:58 FLIGetStepsRemaining err=0  RemainingSteps=0
04:42:58 Filter is already there-color wheel unchanged
04:42:58 Received message from Master: op=Shutter serial=182045
04:42:58 Shutter LASER close
04:42:58 Received message from Camera: op=State serial=182047
04:42:58 GetSingleValue result=40  Value=cccccccc
04:42:58 SkyScan query
04:42:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:42:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:42:59 Parameters OK
04:42:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:42:59 Set A/D data flow result=40
04:42:59 Set A/D channel type result=40
04:42:59 Set A/D encoding result=40
04:42:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:42:59 Set channel filter=0.000000e+000  result=40
04:42:59 Config A/D  Result=40
04:42:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:42:59 Get A/D filter: -9.255963e+061  result=40
04:42:59 Get A/D value=-858993460  result=40
04:42:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:42:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:42:59 Parameters OK
04:42:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:42:59 Set A/D data flow result=40
04:42:59 Set A/D channel type result=40
04:42:59 Set A/D encoding result=40
04:42:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:42:59 Set channel filter=0.000000e+000  result=40
04:42:59 Config A/D  Result=40
04:42:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:42:59 Get A/D filter: -9.255963e+061  result=40
04:42:59 Get A/D value=-858993460  result=40
04:42:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:42:59 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:42:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:42:59 Aux=
04:42:59 Message to Camera, serial 182047 queued
04:43:36 Received message from Master: op=PointingHead serial=182060
04:43:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:43:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:43:36 Point started: ret=0
04:43:36 point_skyscan result=0
04:43:37 Check angles
04:43:37 SkyScan query
04:43:37 SkyScan query done: ret=0  az=152.805<-10187  ze=6.51<-11566  Statuses=0009 0008
04:43:37 Msec=0  True Az=152.805  Ze=6.51  Az status=0009  Ze status=0008
04:43:38 Check angles
04:43:38 SkyScan query
04:43:38 SkyScan query done: ret=0  az=135.315<-9021  ze=6.495<-11567  Statuses=0009 0008
04:43:38 Msec=750  True Az=135.315  Ze=6.495  Az status=0009  Ze status=0008
04:43:38 Check angles
04:43:38 SkyScan query
04:43:39 SkyScan query done: ret=0  az=117.87<-7858  ze=6.495<-11567  Statuses=0009 0008
04:43:39 Msec=1500  True Az=117.87  Ze=6.495  Az status=0009  Ze status=0008
04:43:39 Check angles
04:43:39 SkyScan query
04:43:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:43:40 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:43:40 Message to Master queued w/err=0: serial=182060 error=0
04:43:45 Received message from Master: op=Filter serial=182061
04:43:45 Color wheel filter change from 0 to 0
04:43:45 FLIGetFilterPos err=0  currentPosition=0
04:43:45 FLIGetStepsRemaining err=0  RemainingSteps=0
04:43:45 Filter is already there-color wheel unchanged
04:43:45 Received message from Master: op=Shutter serial=182062
04:43:45 Shutter LASER close
04:43:45 Received message from Camera: op=State serial=182064
04:43:45 GetSingleValue result=40  Value=cccccccc
04:43:45 SkyScan query
04:43:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:43:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:43:45 Parameters OK
04:43:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:43:45 Set A/D data flow result=40
04:43:45 Set A/D channel type result=40
04:43:45 Set A/D encoding result=40
04:43:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:43:45 Set channel filter=0.000000e+000  result=40
04:43:45 Config A/D  Result=40
04:43:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:43:45 Get A/D filter: -9.255963e+061  result=40
04:43:45 Get A/D value=-858993460  result=40
04:43:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:43:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:43:45 Parameters OK
04:43:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:43:45 Set A/D data flow result=40
04:43:45 Set A/D channel type result=40
04:43:45 Set A/D encoding result=40
04:43:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:43:45 Set channel filter=0.000000e+000  result=40
04:43:45 Config A/D  Result=40
04:43:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:43:45 Get A/D filter: -9.255963e+061  result=40
04:43:45 Get A/D value=-858993460  result=40
04:43:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:43:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:43:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:43:45 Aux=
04:43:45 Message to Camera, serial 182064 queued
[UTC 2019-3-9  04:43:48]
04:44:22 Received message from Master: op=PointingHead serial=182077
04:44:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:44:22 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:44:23 Point started: ret=0
04:44:23 point_skyscan result=0
04:44:23 Check angles
04:44:23 SkyScan query
04:44:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
04:44:24 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
04:44:24 Check angles
04:44:24 SkyScan query
04:44:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
04:44:25 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
04:44:25 Check angles
04:44:25 SkyScan query
04:44:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.445<-16363  Statuses=0008 0009
04:44:25 Msec=1500  True Az=112.995  Ze=-65.445  Az status=0008  Ze status=0009
04:44:26 Check angles
04:44:26 SkyScan query
04:44:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.295<-17753  Statuses=0008 0009
04:44:26 Msec=2250  True Az=112.995  Ze=-86.295  Az status=0008  Ze status=0009
04:44:26 Check angles
04:44:26 SkyScan query
04:44:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.235<-19149  Statuses=0008 0009
04:44:27 Msec=3000  True Az=112.995  Ze=-107.235  Az status=0008  Ze status=0009
04:44:27 Check angles
04:44:27 SkyScan query
04:44:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.175<-20545  Statuses=0008 0009
04:44:28 Msec=3750  True Az=112.995  Ze=-128.175  Az status=0008  Ze status=0009
04:44:28 Check angles
04:44:28 SkyScan query
04:44:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.16<-21944  Statuses=0008 0009
04:44:28 Msec=4500  True Az=112.995  Ze=-149.16  Az status=0008  Ze status=0009
04:44:29 Check angles
04:44:29 SkyScan query
04:44:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.085<-23339  Statuses=0008 0009
04:44:29 Msec=5250  True Az=112.995  Ze=-170.085  Az status=0008  Ze status=0009
04:44:29 Check angles
04:44:29 SkyScan query
04:44:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:44:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:44:30 Message to Master queued w/err=0: serial=182077 error=0
04:44:35 Received message from Master: op=Filter serial=182078
04:44:35 Color wheel filter change from 0 to 0
04:44:35 FLIGetFilterPos err=0  currentPosition=0
04:44:35 FLIGetStepsRemaining err=0  RemainingSteps=0
04:44:35 Filter is already there-color wheel unchanged
04:44:35 Received message from Master: op=Shutter serial=182079
04:44:35 Shutter LASER open
04:44:35 Received message from Camera: op=State serial=182081
04:44:35 GetSingleValue result=40  Value=cccccccc
04:44:35 SkyScan query
04:44:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:44:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:44:36 Parameters OK
04:44:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:44:36 Set A/D data flow result=40
04:44:36 Set A/D channel type result=40
04:44:36 Set A/D encoding result=40
04:44:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:44:36 Set channel filter=0.000000e+000  result=40
04:44:36 Config A/D  Result=40
04:44:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:44:36 Get A/D filter: -9.255963e+061  result=40
04:44:36 Get A/D value=-858993460  result=40
04:44:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:44:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:44:36 Parameters OK
04:44:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:44:36 Set A/D data flow result=40
04:44:36 Set A/D channel type result=40
04:44:36 Set A/D encoding result=40
04:44:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:44:36 Set channel filter=0.000000e+000  result=40
04:44:36 Config A/D  Result=40
04:44:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:44:36 Get A/D filter: -9.255963e+061  result=40
04:44:36 Get A/D value=-858993460  result=40
04:44:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:44:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:44:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:44:36 Aux=
04:44:36 Message to Camera, serial 182081 queued
04:44:44 Received message from Master: op=Shutter serial=182091
04:44:44 Shutter LASER close
04:44:45 Received message from Master: op=PointingHead serial=182095
04:44:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:44:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:44:45 Point started: ret=0
04:44:45 point_skyscan result=0
04:44:46 Check angles
04:44:46 SkyScan query
04:44:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.965<-21531  Statuses=0008 0009
04:44:46 Msec=0  True Az=112.995  Ze=-142.965  Az status=0008  Ze status=0009
04:44:47 Check angles
04:44:47 SkyScan query
04:44:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.56<-20104  Statuses=0008 0009
04:44:47 Msec=750  True Az=112.995  Ze=-121.56  Az status=0008  Ze status=0009
04:44:47 Check angles
04:44:47 SkyScan query
04:44:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.62<-18708  Statuses=0008 0009
04:44:48 Msec=1500  True Az=112.995  Ze=-100.62  Az status=0008  Ze status=0009
04:44:48 Check angles
04:44:48 SkyScan query
04:44:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
04:44:49 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
04:44:49 Check angles
04:44:49 SkyScan query
04:44:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.245<-15883  Statuses=0008 0009
04:44:49 Msec=3000  True Az=112.995  Ze=-58.245  Az status=0008  Ze status=0009
04:44:50 Check angles
04:44:50 SkyScan query
04:44:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.32<-14488  Statuses=0008 0009
04:44:50 Msec=3750  True Az=112.995  Ze=-37.32  Az status=0008  Ze status=0009
04:44:50 Check angles
04:44:50 SkyScan query
04:44:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.35<-13090  Statuses=0008 0009
04:44:51 Msec=4500  True Az=112.995  Ze=-16.35  Az status=0008  Ze status=0009
04:44:51 Check angles
04:44:51 SkyScan query
04:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=4.485<-11701  Statuses=0008 0009
04:44:52 Msec=5250  True Az=112.995  Ze=4.485  Az status=0008  Ze status=0009
04:44:52 Check angles
04:44:52 SkyScan query
04:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:44:52 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:44:52 Message to Master queued w/err=0: serial=182095 error=0
04:44:57 Received message from Master: op=Filter serial=182096
04:44:57 Color wheel filter change from 0 to 0
04:44:57 FLIGetFilterPos err=0  currentPosition=0
04:44:57 FLIGetStepsRemaining err=0  RemainingSteps=0
04:44:57 Filter is already there-color wheel unchanged
04:44:58 Received message from Master: op=Shutter serial=182097
04:44:58 Shutter LASER close
04:44:58 Received message from Camera: op=State serial=182099
04:44:58 GetSingleValue result=40  Value=cccccccc
04:44:58 SkyScan query
04:44:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:44:58 Parameters OK
04:44:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:44:58 Set A/D data flow result=40
04:44:58 Set A/D channel type result=40
04:44:58 Set A/D encoding result=40
04:44:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:44:58 Set channel filter=0.000000e+000  result=40
04:44:58 Config A/D  Result=40
04:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:44:58 Get A/D filter: -9.255963e+061  result=40
04:44:58 Get A/D value=-858993460  result=40
04:44:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:44:58 Parameters OK
04:44:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:44:58 Set A/D data flow result=40
04:44:58 Set A/D channel type result=40
04:44:58 Set A/D encoding result=40
04:44:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:44:58 Set channel filter=0.000000e+000  result=40
04:44:58 Config A/D  Result=40
04:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:44:58 Get A/D filter: -9.255963e+061  result=40
04:44:58 Get A/D value=-858993460  result=40
04:44:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:44:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:44:58 Aux=
04:44:58 Message to Camera, serial 182099 queued
04:45:35 Received message from Master: op=PointingHead serial=182112
04:45:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:45:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:45:36 Point started: ret=0
04:45:36 point_skyscan result=0
04:45:36 Check angles
04:45:36 SkyScan query
04:45:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:45:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:45:37 Message to Master queued w/err=0: serial=182112 error=0
04:45:42 Received message from Master: op=Filter serial=182113
04:45:42 Color wheel filter change from 0 to 0
04:45:42 FLIGetFilterPos err=0  currentPosition=0
04:45:42 FLIGetStepsRemaining err=0  RemainingSteps=0
04:45:42 Filter is already there-color wheel unchanged
04:45:42 Received message from Master: op=Shutter serial=182114
04:45:42 Shutter LASER close
04:45:42 Received message from Camera: op=State serial=182116
04:45:42 GetSingleValue result=40  Value=cccccccc
04:45:42 SkyScan query
04:45:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:45:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:45:43 Parameters OK
04:45:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:45:43 Set A/D data flow result=40
04:45:43 Set A/D channel type result=40
04:45:43 Set A/D encoding result=40
04:45:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:45:43 Set channel filter=0.000000e+000  result=40
04:45:43 Config A/D  Result=40
04:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:45:43 Get A/D filter: -9.255963e+061  result=40
04:45:43 Get A/D value=-858993460  result=40
04:45:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:45:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:45:43 Parameters OK
04:45:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:45:43 Set A/D data flow result=40
04:45:43 Set A/D channel type result=40
04:45:43 Set A/D encoding result=40
04:45:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:45:43 Set channel filter=0.000000e+000  result=40
04:45:43 Config A/D  Result=40
04:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:45:43 Get A/D filter: -9.255963e+061  result=40
04:45:43 Get A/D value=-858993460  result=40
04:45:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:45:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:45:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:45:43 Aux=
04:45:43 Message to Camera, serial 182116 queued
04:46:19 Received message from Master: op=PointingHead serial=182129
04:46:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:46:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:46:20 Point started: ret=0
04:46:20 point_skyscan result=0
04:46:21 Check angles
04:46:21 SkyScan query
04:46:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:46:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:46:21 Message to Master queued w/err=0: serial=182129 error=0
04:46:26 Received message from Master: op=Filter serial=182130
04:46:26 Color wheel filter change from 0 to 0
04:46:26 FLIGetFilterPos err=0  currentPosition=0
04:46:26 FLIGetStepsRemaining err=0  RemainingSteps=0
04:46:26 Filter is already there-color wheel unchanged
04:46:26 Received message from Master: op=Shutter serial=182131
04:46:26 Shutter LASER close
04:46:26 Received message from Camera: op=State serial=182133
04:46:26 GetSingleValue result=40  Value=cccccccc
04:46:26 SkyScan query
04:46:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:46:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:46:27 Parameters OK
04:46:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:46:27 Set A/D data flow result=40
04:46:27 Set A/D channel type result=40
04:46:27 Set A/D encoding result=40
04:46:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:46:27 Set channel filter=0.000000e+000  result=40
04:46:27 Config A/D  Result=40
04:46:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:46:27 Get A/D filter: -9.255963e+061  result=40
04:46:27 Get A/D value=-858993460  result=40
04:46:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:46:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:46:27 Parameters OK
04:46:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:46:27 Set A/D data flow result=40
04:46:27 Set A/D channel type result=40
04:46:27 Set A/D encoding result=40
04:46:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:46:27 Set channel filter=0.000000e+000  result=40
04:46:27 Config A/D  Result=40
04:46:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:46:27 Get A/D filter: -9.255963e+061  result=40
04:46:27 Get A/D value=-858993460  result=40
04:46:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:46:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:46:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:46:27 Aux=
04:46:27 Message to Camera, serial 182133 queued
04:47:04 Received message from Master: op=PointingHead serial=182146
04:47:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:47:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:47:04 Point started: ret=0
04:47:04 point_skyscan result=0
04:47:05 Check angles
04:47:05 SkyScan query
04:47:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:47:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:47:05 Message to Master queued w/err=0: serial=182146 error=0
04:47:10 Received message from Master: op=Filter serial=182147
04:47:10 Color wheel filter change from 0 to 0
04:47:10 FLIGetFilterPos err=0  currentPosition=0
04:47:10 FLIGetStepsRemaining err=0  RemainingSteps=0
04:47:10 Filter is already there-color wheel unchanged
04:47:11 Received message from Master: op=Shutter serial=182148
04:47:11 Shutter LASER close
04:47:11 Received message from Camera: op=State serial=182150
04:47:11 GetSingleValue result=40  Value=cccccccc
04:47:11 SkyScan query
04:47:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:47:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:47:11 Parameters OK
04:47:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:47:11 Set A/D data flow result=40
04:47:11 Set A/D channel type result=40
04:47:11 Set A/D encoding result=40
04:47:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:47:11 Set channel filter=0.000000e+000  result=40
04:47:11 Config A/D  Result=40
04:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:47:11 Get A/D filter: -9.255963e+061  result=40
04:47:11 Get A/D value=-858993460  result=40
04:47:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:47:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:47:11 Parameters OK
04:47:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:47:11 Set A/D data flow result=40
04:47:11 Set A/D channel type result=40
04:47:11 Set A/D encoding result=40
04:47:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:47:11 Set channel filter=0.000000e+000  result=40
04:47:11 Config A/D  Result=40
04:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:47:11 Get A/D filter: -9.255963e+061  result=40
04:47:11 Get A/D value=-858993460  result=40
04:47:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:47:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:47:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:47:11 Aux=
04:47:11 Message to Camera, serial 182150 queued
04:47:48 Received message from Master: op=PointingHead serial=182163
04:47:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:47:48 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:47:48 Point started: ret=0
04:47:48 point_skyscan result=0
04:47:49 Check angles
04:47:49 SkyScan query
04:47:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.865<-13591  Statuses=0008 0009
04:47:50 Msec=0  True Az=112.995  Ze=-23.865  Az status=0008  Ze status=0009
04:47:50 Check angles
04:47:50 SkyScan query
04:47:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.82<-14988  Statuses=0008 0009
04:47:50 Msec=750  True Az=112.995  Ze=-44.82  Az status=0008  Ze status=0009
04:47:51 Check angles
04:47:51 SkyScan query
04:47:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.195<-16413  Statuses=0008 0009
04:47:51 Msec=1500  True Az=112.995  Ze=-66.195  Az status=0008  Ze status=0009
04:47:51 Check angles
04:47:51 SkyScan query
04:47:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.585<-17839  Statuses=0008 0009
04:47:52 Msec=2250  True Az=112.995  Ze=-87.585  Az status=0008  Ze status=0009
04:47:52 Check angles
04:47:52 SkyScan query
04:47:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.96<-19264  Statuses=0008 0009
04:47:53 Msec=3000  True Az=112.995  Ze=-108.96  Az status=0008  Ze status=0009
04:47:53 Check angles
04:47:53 SkyScan query
04:47:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.915<-20661  Statuses=0008 0009
04:47:54 Msec=3750  True Az=112.995  Ze=-129.915  Az status=0008  Ze status=0009
04:47:54 Check angles
04:47:54 SkyScan query
04:47:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.87<-22058  Statuses=0008 0009
04:47:54 Msec=4500  True Az=112.995  Ze=-150.87  Az status=0008  Ze status=0009
04:47:54 Check angles
04:47:54 SkyScan query
04:47:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.51<-23434  Statuses=0008 0009
04:47:55 Msec=5250  True Az=112.995  Ze=-171.51  Az status=0008  Ze status=0009
04:47:55 Check angles
04:47:55 SkyScan query
04:47:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:47:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:47:56 Message to Master queued w/err=0: serial=182163 error=0
04:48:01 Received message from Master: op=Filter serial=182164
04:48:01 Color wheel filter change from 0 to 0
04:48:01 FLIGetFilterPos err=0  currentPosition=0
04:48:01 FLIGetStepsRemaining err=0  RemainingSteps=0
04:48:01 Filter is already there-color wheel unchanged
04:48:01 Received message from Master: op=Shutter serial=182165
04:48:01 Shutter LASER open
04:48:01 Received message from Camera: op=State serial=182167
04:48:01 GetSingleValue result=40  Value=cccccccc
04:48:01 SkyScan query
04:48:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:48:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:02 Parameters OK
04:48:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:02 Set A/D data flow result=40
04:48:02 Set A/D channel type result=40
04:48:02 Set A/D encoding result=40
04:48:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:02 Set channel filter=0.000000e+000  result=40
04:48:02 Config A/D  Result=40
04:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:02 Get A/D filter: -9.255963e+061  result=40
04:48:02 Get A/D value=-858993460  result=40
04:48:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:02 Parameters OK
04:48:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:02 Set A/D data flow result=40
04:48:02 Set A/D channel type result=40
04:48:02 Set A/D encoding result=40
04:48:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:02 Set channel filter=0.000000e+000  result=40
04:48:02 Config A/D  Result=40
04:48:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:02 Get A/D filter: -9.255963e+061  result=40
04:48:02 Get A/D value=-858993460  result=40
04:48:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:48:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:48:02 Aux=
04:48:02 Message to Camera, serial 182167 queued
04:48:10 Received message from Master: op=Shutter serial=182177
04:48:10 Shutter LASER close
04:48:11 Received message from Master: op=PointingHead serial=182181
04:48:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:48:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:48:11 Point started: ret=0
04:48:11 point_skyscan result=0
04:48:12 Check angles
04:48:12 SkyScan query
04:48:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.71<-21514  Statuses=0008 0009
04:48:12 Msec=0  True Az=112.995  Ze=-142.71  Az status=0008  Ze status=0009
04:48:13 Check angles
04:48:13 SkyScan query
04:48:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.755<-20117  Statuses=0008 0009
04:48:13 Msec=750  True Az=112.995  Ze=-121.755  Az status=0008  Ze status=0009
04:48:13 Check angles
04:48:13 SkyScan query
04:48:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.815<-18721  Statuses=0008 0009
04:48:14 Msec=1500  True Az=112.995  Ze=-100.815  Az status=0008  Ze status=0009
04:48:14 Check angles
04:48:14 SkyScan query
04:48:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.86<-17324  Statuses=0008 0009
04:48:15 Msec=2250  True Az=112.995  Ze=-79.86  Az status=0008  Ze status=0009
04:48:15 Check angles
04:48:15 SkyScan query
04:48:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.92<-15928  Statuses=0008 0009
04:48:15 Msec=3000  True Az=112.995  Ze=-58.92  Az status=0008  Ze status=0009
04:48:16 Check angles
04:48:16 SkyScan query
04:48:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.935<-14529  Statuses=0008 0009
04:48:16 Msec=3750  True Az=112.995  Ze=-37.935  Az status=0008  Ze status=0009
04:48:16 Check angles
04:48:16 SkyScan query
04:48:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.98<-13132  Statuses=0008 0009
04:48:17 Msec=4500  True Az=112.995  Ze=-16.98  Az status=0008  Ze status=0009
04:48:17 Check angles
04:48:17 SkyScan query
04:48:18 SkyScan query done: ret=0  az=112.995<-7533  ze=3.96<-11736  Statuses=0008 0009
04:48:18 Msec=5250  True Az=112.995  Ze=3.96  Az status=0008  Ze status=0009
04:48:18 Check angles
04:48:18 SkyScan query
04:48:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:48:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:48:18 Message to Master queued w/err=0: serial=182181 error=0
04:48:23 Received message from Master: op=Filter serial=182182
04:48:23 Color wheel filter change from 0 to 0
04:48:23 FLIGetFilterPos err=0  currentPosition=0
04:48:23 FLIGetStepsRemaining err=0  RemainingSteps=0
04:48:23 Filter is already there-color wheel unchanged
04:48:24 Received message from Master: op=Shutter serial=182183
04:48:24 Shutter LASER close
04:48:24 Received message from Camera: op=State serial=182185
04:48:24 GetSingleValue result=40  Value=cccccccc
04:48:24 SkyScan query
04:48:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:48:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:24 Parameters OK
04:48:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:24 Set A/D data flow result=40
04:48:24 Set A/D channel type result=40
04:48:24 Set A/D encoding result=40
04:48:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:24 Set channel filter=0.000000e+000  result=40
04:48:24 Config A/D  Result=40
04:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:24 Get A/D filter: -9.255963e+061  result=40
04:48:24 Get A/D value=-858993460  result=40
04:48:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:48:24 Parameters OK
04:48:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:48:24 Set A/D data flow result=40
04:48:24 Set A/D channel type result=40
04:48:24 Set A/D encoding result=40
04:48:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:48:24 Set channel filter=0.000000e+000  result=40
04:48:24 Config A/D  Result=40
04:48:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:48:24 Get A/D filter: -9.255963e+061  result=40
04:48:24 Get A/D value=-858993460  result=40
04:48:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:48:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:48:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:48:24 Aux=
04:48:24 Message to Camera, serial 182185 queued
04:49:01 Received message from Master: op=PointingHead serial=182198
04:49:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:49:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:49:02 Point started: ret=0
04:49:02 point_skyscan result=0
04:49:02 Check angles
04:49:02 SkyScan query
04:49:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:49:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:49:03 Message to Master queued w/err=0: serial=182198 error=0
04:49:08 Received message from Master: op=Filter serial=182199
04:49:08 Color wheel filter change from 0 to 0
04:49:08 FLIGetFilterPos err=0  currentPosition=0
04:49:08 FLIGetStepsRemaining err=0  RemainingSteps=0
04:49:08 Filter is already there-color wheel unchanged
04:49:08 Received message from Master: op=Shutter serial=182200
04:49:08 Shutter LASER close
04:49:08 Received message from Camera: op=State serial=182202
04:49:08 GetSingleValue result=40  Value=cccccccc
04:49:08 SkyScan query
04:49:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:49:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:49:09 Parameters OK
04:49:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:49:09 Set A/D data flow result=40
04:49:09 Set A/D channel type result=40
04:49:09 Set A/D encoding result=40
04:49:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:49:09 Set channel filter=0.000000e+000  result=40
04:49:09 Config A/D  Result=40
04:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:49:09 Get A/D filter: -9.255963e+061  result=40
04:49:09 Get A/D value=-858993460  result=40
04:49:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:49:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:49:09 Parameters OK
04:49:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:49:09 Set A/D data flow result=40
04:49:09 Set A/D channel type result=40
04:49:09 Set A/D encoding result=40
04:49:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:49:09 Set channel filter=0.000000e+000  result=40
04:49:09 Config A/D  Result=40
04:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:49:09 Get A/D filter: -9.255963e+061  result=40
04:49:09 Get A/D value=-858993460  result=40
04:49:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:49:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:49:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:49:09 Aux=
04:49:09 Message to Camera, serial 182202 queued
04:49:46 Received message from Master: op=PointingHead serial=182215
04:49:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:49:46 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:49:46 Point started: ret=0
04:49:46 point_skyscan result=0
04:49:47 Check angles
04:49:47 SkyScan query
04:49:47 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.495<-12433  Statuses=0009 0008
04:49:47 Msec=0  True Az=135.915  Ze=-6.495  Az status=0009  Ze status=0008
04:49:47 Check angles
04:49:47 SkyScan query
04:49:48 SkyScan query done: ret=0  az=153.42<-10228  ze=-6.48<-12432  Statuses=0009 0008
04:49:48 Msec=750  True Az=153.42  Ze=-6.48  Az status=0009  Ze status=0008
04:49:48 Check angles
04:49:48 SkyScan query
04:49:49 SkyScan query done: ret=0  az=170.79<-11386  ze=-6.48<-12432  Statuses=0009 0008
04:49:49 Msec=1500  True Az=170.79  Ze=-6.48  Az status=0009  Ze status=0008
04:49:49 Check angles
04:49:49 SkyScan query
04:49:49 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:49:49 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:49:49 Message to Master queued w/err=0: serial=182215 error=0
04:49:54 Received message from Master: op=Filter serial=182216
04:49:54 Color wheel filter change from 0 to 0
04:49:54 FLIGetFilterPos err=0  currentPosition=0
04:49:54 FLIGetStepsRemaining err=0  RemainingSteps=0
04:49:54 Filter is already there-color wheel unchanged
04:49:55 Received message from Master: op=Shutter serial=182217
04:49:55 Shutter LASER close
04:49:55 Received message from Camera: op=State serial=182219
04:49:55 GetSingleValue result=40  Value=cccccccc
04:49:55 SkyScan query
04:49:55 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:49:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:49:55 Parameters OK
04:49:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:49:55 Set A/D data flow result=40
04:49:55 Set A/D channel type result=40
04:49:55 Set A/D encoding result=40
04:49:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:49:55 Set channel filter=0.000000e+000  result=40
04:49:55 Config A/D  Result=40
04:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:49:55 Get A/D filter: -9.255963e+061  result=40
04:49:55 Get A/D value=-858993460  result=40
04:49:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:49:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:49:55 Parameters OK
04:49:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:49:55 Set A/D data flow result=40
04:49:55 Set A/D channel type result=40
04:49:55 Set A/D encoding result=40
04:49:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:49:55 Set channel filter=0.000000e+000  result=40
04:49:55 Config A/D  Result=40
04:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:49:55 Get A/D filter: -9.255963e+061  result=40
04:49:55 Get A/D value=-858993460  result=40
04:49:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:49:55 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:49:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:49:55 Aux=
04:49:55 Message to Camera, serial 182219 queued
04:50:32 Received message from Master: op=PointingHead serial=182232
04:50:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:50:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:50:32 Point started: ret=0
04:50:32 point_skyscan result=0
04:50:33 Check angles
04:50:33 SkyScan query
04:50:34 SkyScan query done: ret=0  az=152.52<-10168  ze=6.51<-11566  Statuses=0009 0008
04:50:34 Msec=0  True Az=152.52  Ze=6.51  Az status=0009  Ze status=0008
04:50:34 Check angles
04:50:34 SkyScan query
04:50:34 SkyScan query done: ret=0  az=134.82<-8988  ze=6.495<-11567  Statuses=0009 0008
04:50:34 Msec=750  True Az=134.82  Ze=6.495  Az status=0009  Ze status=0008
04:50:35 Check angles
04:50:35 SkyScan query
04:50:35 SkyScan query done: ret=0  az=117.36<-7824  ze=6.495<-11567  Statuses=0009 0008
04:50:35 Msec=1500  True Az=117.36  Ze=6.495  Az status=0009  Ze status=0008
04:50:35 Check angles
04:50:35 SkyScan query
04:50:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:50:36 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:50:36 Message to Master queued w/err=0: serial=182232 error=0
04:50:41 Received message from Master: op=Filter serial=182233
04:50:41 Color wheel filter change from 0 to 0
04:50:41 FLIGetFilterPos err=0  currentPosition=0
04:50:41 FLIGetStepsRemaining err=0  RemainingSteps=0
04:50:41 Filter is already there-color wheel unchanged
04:50:41 Received message from Master: op=Shutter serial=182234
04:50:41 Shutter LASER close
04:50:41 Received message from Camera: op=State serial=182236
04:50:41 GetSingleValue result=40  Value=cccccccc
04:50:41 SkyScan query
04:50:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:50:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:50:42 Parameters OK
04:50:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:50:42 Set A/D data flow result=40
04:50:42 Set A/D channel type result=40
04:50:42 Set A/D encoding result=40
04:50:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:50:42 Set channel filter=0.000000e+000  result=40
04:50:42 Config A/D  Result=40
04:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:50:42 Get A/D filter: -9.255963e+061  result=40
04:50:42 Get A/D value=-858993460  result=40
04:50:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:50:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:50:42 Parameters OK
04:50:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:50:42 Set A/D data flow result=40
04:50:42 Set A/D channel type result=40
04:50:42 Set A/D encoding result=40
04:50:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:50:42 Set channel filter=0.000000e+000  result=40
04:50:42 Config A/D  Result=40
04:50:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:50:42 Get A/D filter: -9.255963e+061  result=40
04:50:42 Get A/D value=-858993460  result=40
04:50:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:50:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:50:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:50:42 Aux=
04:50:42 Message to Camera, serial 182236 queued
04:51:19 Received message from Master: op=PointingHead serial=182249
04:51:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:51:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:51:19 Point started: ret=0
04:51:19 point_skyscan result=0
04:51:20 Check angles
04:51:20 SkyScan query
04:51:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.67<-13578  Statuses=0008 0009
04:51:20 Msec=0  True Az=112.995  Ze=-23.67  Az status=0008  Ze status=0009
04:51:20 Check angles
04:51:20 SkyScan query
04:51:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.64<-14976  Statuses=0008 0009
04:51:21 Msec=750  True Az=112.995  Ze=-44.64  Az status=0008  Ze status=0009
04:51:21 Check angles
04:51:21 SkyScan query
04:51:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.58<-16372  Statuses=0008 0009
04:51:22 Msec=1500  True Az=112.995  Ze=-65.58  Az status=0008  Ze status=0009
04:51:22 Check angles
04:51:22 SkyScan query
04:51:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.535<-17769  Statuses=0008 0009
04:51:23 Msec=2250  True Az=112.995  Ze=-86.535  Az status=0008  Ze status=0009
04:51:23 Check angles
04:51:23 SkyScan query
04:51:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.49<-19166  Statuses=0008 0009
04:51:23 Msec=3000  True Az=112.995  Ze=-107.49  Az status=0008  Ze status=0009
04:51:23 Check angles
04:51:23 SkyScan query
04:51:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.43<-20562  Statuses=0008 0009
04:51:24 Msec=3750  True Az=112.995  Ze=-128.43  Az status=0008  Ze status=0009
04:51:24 Check angles
04:51:24 SkyScan query
04:51:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.415<-21961  Statuses=0008 0009
04:51:25 Msec=4500  True Az=112.995  Ze=-149.415  Az status=0008  Ze status=0009
04:51:25 Check angles
04:51:25 SkyScan query
04:51:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.34<-23356  Statuses=0008 0009
04:51:26 Msec=5250  True Az=112.995  Ze=-170.34  Az status=0008  Ze status=0009
04:51:26 Check angles
04:51:26 SkyScan query
04:51:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:51:26 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:51:26 Message to Master queued w/err=0: serial=182249 error=0
04:51:31 Received message from Master: op=Filter serial=182250
04:51:31 Color wheel filter change from 0 to 0
04:51:31 FLIGetFilterPos err=0  currentPosition=0
04:51:31 FLIGetStepsRemaining err=0  RemainingSteps=0
04:51:31 Filter is already there-color wheel unchanged
04:51:31 Received message from Master: op=Shutter serial=182251
04:51:31 Shutter LASER open
04:51:32 Received message from Camera: op=State serial=182253
04:51:32 GetSingleValue result=40  Value=cccccccc
04:51:32 SkyScan query
04:51:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:51:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:32 Parameters OK
04:51:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:32 Set A/D data flow result=40
04:51:32 Set A/D channel type result=40
04:51:32 Set A/D encoding result=40
04:51:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:32 Set channel filter=0.000000e+000  result=40
04:51:32 Config A/D  Result=40
04:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:32 Get A/D filter: -9.255963e+061  result=40
04:51:32 Get A/D value=-858993460  result=40
04:51:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:32 Parameters OK
04:51:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:32 Set A/D data flow result=40
04:51:32 Set A/D channel type result=40
04:51:32 Set A/D encoding result=40
04:51:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:32 Set channel filter=0.000000e+000  result=40
04:51:32 Config A/D  Result=40
04:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:32 Get A/D filter: -9.255963e+061  result=40
04:51:32 Get A/D value=-858993460  result=40
04:51:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:51:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:51:32 Aux=
04:51:32 Message to Camera, serial 182253 queued
04:51:41 Received message from Master: op=Shutter serial=182263
04:51:41 Shutter LASER close
04:51:41 Received message from Master: op=PointingHead serial=182267
04:51:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:51:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:51:41 Point started: ret=0
04:51:41 point_skyscan result=0
04:51:42 Check angles
04:51:42 SkyScan query
04:51:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.695<-21513  Statuses=0008 0009
04:51:43 Msec=0  True Az=112.995  Ze=-142.695  Az status=0008  Ze status=0009
04:51:43 Check angles
04:51:43 SkyScan query
04:51:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.74<-20116  Statuses=0008 0009
04:51:44 Msec=750  True Az=112.995  Ze=-121.74  Az status=0008  Ze status=0009
04:51:44 Check angles
04:51:44 SkyScan query
04:51:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.8<-18720  Statuses=0008 0009
04:51:44 Msec=1500  True Az=112.995  Ze=-100.8  Az status=0008  Ze status=0009
04:51:44 Check angles
04:51:44 SkyScan query
04:51:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.425<-17295  Statuses=0008 0009
04:51:45 Msec=2250  True Az=112.995  Ze=-79.425  Az status=0008  Ze status=0009
04:51:45 Check angles
04:51:45 SkyScan query
04:51:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.44<-15896  Statuses=0008 0009
04:51:46 Msec=3000  True Az=112.995  Ze=-58.44  Az status=0008  Ze status=0009
04:51:46 Check angles
04:51:46 SkyScan query
04:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.515<-14501  Statuses=0008 0009
04:51:47 Msec=3750  True Az=112.995  Ze=-37.515  Az status=0008  Ze status=0009
04:51:47 Check angles
04:51:47 SkyScan query
04:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.53<-13102  Statuses=0008 0009
04:51:47 Msec=4500  True Az=112.995  Ze=-16.53  Az status=0008  Ze status=0009
04:51:47 Check angles
04:51:47 SkyScan query
04:51:48 SkyScan query done: ret=0  az=112.995<-7533  ze=4.335<-11711  Statuses=0008 0009
04:51:48 Msec=5250  True Az=112.995  Ze=4.335  Az status=0008  Ze status=0009
04:51:48 Check angles
04:51:48 SkyScan query
04:51:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:51:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:51:49 Message to Master queued w/err=0: serial=182267 error=0
04:51:54 Received message from Master: op=Filter serial=182268
04:51:54 Color wheel filter change from 0 to 0
04:51:54 FLIGetFilterPos err=0  currentPosition=0
04:51:54 FLIGetStepsRemaining err=0  RemainingSteps=0
04:51:54 Filter is already there-color wheel unchanged
04:51:54 Received message from Master: op=Shutter serial=182269
04:51:54 Shutter LASER close
04:51:54 Received message from Camera: op=State serial=182271
04:51:54 GetSingleValue result=40  Value=cccccccc
04:51:54 SkyScan query
04:51:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:51:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:55 Parameters OK
04:51:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:55 Set A/D data flow result=40
04:51:55 Set A/D channel type result=40
04:51:55 Set A/D encoding result=40
04:51:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:55 Set channel filter=0.000000e+000  result=40
04:51:55 Config A/D  Result=40
04:51:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:55 Get A/D filter: -9.255963e+061  result=40
04:51:55 Get A/D value=-858993460  result=40
04:51:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:51:55 Parameters OK
04:51:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:51:55 Set A/D data flow result=40
04:51:55 Set A/D channel type result=40
04:51:55 Set A/D encoding result=40
04:51:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:51:55 Set channel filter=0.000000e+000  result=40
04:51:55 Config A/D  Result=40
04:51:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:51:55 Get A/D filter: -9.255963e+061  result=40
04:51:55 Get A/D value=-858993460  result=40
04:51:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:51:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:51:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:51:55 Aux=
04:51:55 Message to Camera, serial 182271 queued
04:52:32 Received message from Master: op=PointingHead serial=182284
04:52:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:52:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:52:32 Point started: ret=0
04:52:32 point_skyscan result=0
04:52:33 Check angles
04:52:33 SkyScan query
04:52:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:52:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:52:33 Message to Master queued w/err=0: serial=182284 error=0
04:52:38 Received message from Master: op=Filter serial=182285
04:52:38 Color wheel filter change from 0 to 0
04:52:38 FLIGetFilterPos err=0  currentPosition=0
04:52:38 FLIGetStepsRemaining err=0  RemainingSteps=0
04:52:38 Filter is already there-color wheel unchanged
04:52:38 Received message from Master: op=Shutter serial=182286
04:52:38 Shutter LASER close
04:52:38 Received message from Camera: op=State serial=182288
04:52:38 GetSingleValue result=40  Value=cccccccc
04:52:38 SkyScan query
04:52:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:52:39 Parameters OK
04:52:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:52:39 Set A/D data flow result=40
04:52:39 Set A/D channel type result=40
04:52:39 Set A/D encoding result=40
04:52:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:52:39 Set channel filter=0.000000e+000  result=40
04:52:39 Config A/D  Result=40
04:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:52:39 Get A/D filter: -9.255963e+061  result=40
04:52:39 Get A/D value=-858993460  result=40
04:52:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:52:39 Parameters OK
04:52:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:52:39 Set A/D data flow result=40
04:52:39 Set A/D channel type result=40
04:52:39 Set A/D encoding result=40
04:52:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:52:39 Set channel filter=0.000000e+000  result=40
04:52:39 Config A/D  Result=40
04:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:52:39 Get A/D filter: -9.255963e+061  result=40
04:52:39 Get A/D value=-858993460  result=40
04:52:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:52:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:52:39 Aux=
04:52:39 Message to Camera, serial 182288 queued
04:53:15 Received message from Master: op=PointingHead serial=182300
04:53:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:53:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:53:15 Point started: ret=0
04:53:15 point_skyscan result=0
04:53:16 Check angles
04:53:16 SkyScan query
04:53:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:53:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:53:17 Message to Master queued w/err=0: serial=182300 error=0
04:53:22 Received message from Master: op=Filter serial=182301
04:53:22 Color wheel filter change from 0 to 0
04:53:22 FLIGetFilterPos err=0  currentPosition=0
04:53:22 FLIGetStepsRemaining err=0  RemainingSteps=0
04:53:22 Filter is already there-color wheel unchanged
04:53:22 Received message from Master: op=Shutter serial=182302
04:53:22 Shutter LASER close
04:53:22 Received message from Camera: op=State serial=182304
04:53:22 GetSingleValue result=40  Value=cccccccc
04:53:22 SkyScan query
04:53:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:53:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:53:22 Parameters OK
04:53:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:53:22 Set A/D data flow result=40
04:53:22 Set A/D channel type result=40
04:53:22 Set A/D encoding result=40
04:53:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:53:22 Set channel filter=0.000000e+000  result=40
04:53:22 Config A/D  Result=40
04:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:53:22 Get A/D filter: -9.255963e+061  result=40
04:53:22 Get A/D value=-858993460  result=40
04:53:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:53:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:53:22 Parameters OK
04:53:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:53:22 Set A/D data flow result=40
04:53:22 Set A/D channel type result=40
04:53:22 Set A/D encoding result=40
04:53:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:53:22 Set channel filter=0.000000e+000  result=40
04:53:22 Config A/D  Result=40
04:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:53:22 Get A/D filter: -9.255963e+061  result=40
04:53:22 Get A/D value=-858993460  result=40
04:53:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:53:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:53:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:53:22 Aux=
04:53:22 Message to Camera, serial 182304 queued
04:53:59 Received message from Master: op=PointingHead serial=182317
04:53:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:53:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:54:00 Point started: ret=0
04:54:00 point_skyscan result=0
04:54:00 Check angles
04:54:00 SkyScan query
04:54:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:54:01 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:54:01 Message to Master queued w/err=0: serial=182317 error=0
04:54:06 Received message from Master: op=Filter serial=182318
04:54:06 Color wheel filter change from 0 to 0
04:54:06 FLIGetFilterPos err=0  currentPosition=0
04:54:06 FLIGetStepsRemaining err=0  RemainingSteps=0
04:54:06 Filter is already there-color wheel unchanged
04:54:06 Received message from Master: op=Shutter serial=182319
04:54:06 Shutter LASER close
04:54:06 Received message from Camera: op=State serial=182321
04:54:06 GetSingleValue result=40  Value=cccccccc
04:54:06 SkyScan query
04:54:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:54:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:54:07 Parameters OK
04:54:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:54:07 Set A/D data flow result=40
04:54:07 Set A/D channel type result=40
04:54:07 Set A/D encoding result=40
04:54:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:54:07 Set channel filter=0.000000e+000  result=40
04:54:07 Config A/D  Result=40
04:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:54:07 Get A/D filter: -9.255963e+061  result=40
04:54:07 Get A/D value=-858993460  result=40
04:54:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:54:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:54:07 Parameters OK
04:54:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:54:07 Set A/D data flow result=40
04:54:07 Set A/D channel type result=40
04:54:07 Set A/D encoding result=40
04:54:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:54:07 Set channel filter=0.000000e+000  result=40
04:54:07 Config A/D  Result=40
04:54:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:54:07 Get A/D filter: -9.255963e+061  result=40
04:54:07 Get A/D value=-858993460  result=40
04:54:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:54:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:54:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:54:07 Aux=
04:54:07 Message to Camera, serial 182321 queued
04:54:43 Received message from Master: op=PointingHead serial=182333
04:54:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:54:43 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:54:43 Point started: ret=0
04:54:43 point_skyscan result=0
04:54:44 Check angles
04:54:44 SkyScan query
04:54:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
04:54:44 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
04:54:44 Check angles
04:54:44 SkyScan query
04:54:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.37<-14958  Statuses=0008 0009
[UTC 2019-3-9  04:54:45]
04:54:45 Msec=750  True Az=112.995  Ze=-44.37  Az status=0008  Ze status=0009
04:54:45 Check angles
04:54:45 SkyScan query
04:54:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.34<-16356  Statuses=0008 0009
04:54:46 Msec=1500  True Az=112.995  Ze=-65.34  Az status=0008  Ze status=0009
04:54:46 Check angles
04:54:46 SkyScan query
04:54:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
04:54:47 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
04:54:47 Check angles
04:54:47 SkyScan query
04:54:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.685<-19179  Statuses=0008 0009
04:54:47 Msec=3000  True Az=112.995  Ze=-107.685  Az status=0008  Ze status=0009
04:54:48 Check angles
04:54:48 SkyScan query
04:54:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.045<-20603  Statuses=0008 0009
04:54:48 Msec=3750  True Az=112.995  Ze=-129.045  Az status=0008  Ze status=0009
04:54:48 Check angles
04:54:48 SkyScan query
04:54:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-150<-22000  Statuses=0008 0009
04:54:49 Msec=4500  True Az=112.995  Ze=-150  Az status=0008  Ze status=0009
04:54:49 Check angles
04:54:49 SkyScan query
04:54:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.865<-23391  Statuses=0008 0009
04:54:50 Msec=5250  True Az=112.995  Ze=-170.865  Az status=0008  Ze status=0009
04:54:50 Check angles
04:54:50 SkyScan query
04:54:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:54:50 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:54:50 Message to Master queued w/err=0: serial=182333 error=0
04:54:55 Received message from Master: op=Filter serial=182334
04:54:55 Color wheel filter change from 0 to 0
04:54:55 FLIGetFilterPos err=0  currentPosition=0
04:54:55 FLIGetStepsRemaining err=0  RemainingSteps=0
04:54:55 Filter is already there-color wheel unchanged
04:54:56 Received message from Master: op=Shutter serial=182335
04:54:56 Shutter LASER open
04:54:56 Received message from Camera: op=State serial=182337
04:54:56 GetSingleValue result=40  Value=cccccccc
04:54:56 SkyScan query
04:54:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:54:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:54:56 Parameters OK
04:54:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:54:56 Set A/D data flow result=40
04:54:56 Set A/D channel type result=40
04:54:56 Set A/D encoding result=40
04:54:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:54:56 Set channel filter=0.000000e+000  result=40
04:54:56 Config A/D  Result=40
04:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:54:56 Get A/D filter: -9.255963e+061  result=40
04:54:56 Get A/D value=-858993460  result=40
04:54:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:54:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:54:56 Parameters OK
04:54:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:54:56 Set A/D data flow result=40
04:54:56 Set A/D channel type result=40
04:54:56 Set A/D encoding result=40
04:54:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:54:56 Set channel filter=0.000000e+000  result=40
04:54:56 Config A/D  Result=40
04:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:54:56 Get A/D filter: -9.255963e+061  result=40
04:54:56 Get A/D value=-858993460  result=40
04:54:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:54:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:54:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:54:56 Aux=
04:54:56 Message to Camera, serial 182337 queued
04:55:05 Received message from Master: op=Shutter serial=182347
04:55:05 Shutter LASER close
04:55:05 Received message from Master: op=PointingHead serial=182351
04:55:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:55:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:55:06 Point started: ret=0
04:55:06 point_skyscan result=0
04:55:06 Check angles
04:55:06 SkyScan query
04:55:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.89<-21526  Statuses=0008 0009
04:55:07 Msec=0  True Az=112.995  Ze=-142.89  Az status=0008  Ze status=0009
04:55:07 Check angles
04:55:07 SkyScan query
04:55:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.935<-20129  Statuses=0008 0009
04:55:08 Msec=750  True Az=112.995  Ze=-121.935  Az status=0008  Ze status=0009
04:55:08 Check angles
04:55:08 SkyScan query
04:55:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.995<-18733  Statuses=0008 0009
04:55:08 Msec=1500  True Az=112.995  Ze=-100.995  Az status=0008  Ze status=0009
04:55:09 Check angles
04:55:09 SkyScan query
04:55:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.055<-17337  Statuses=0008 0009
04:55:09 Msec=2250  True Az=112.995  Ze=-80.055  Az status=0008  Ze status=0009
04:55:09 Check angles
04:55:09 SkyScan query
04:55:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.115<-15941  Statuses=0008 0009
04:55:10 Msec=3000  True Az=112.995  Ze=-59.115  Az status=0008  Ze status=0009
04:55:10 Check angles
04:55:10 SkyScan query
04:55:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.13<-14542  Statuses=0008 0009
04:55:11 Msec=3750  True Az=112.995  Ze=-38.13  Az status=0008  Ze status=0009
04:55:11 Check angles
04:55:11 SkyScan query
04:55:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.16<-13144  Statuses=0008 0009
04:55:11 Msec=4500  True Az=112.995  Ze=-17.16  Az status=0008  Ze status=0009
04:55:12 Check angles
04:55:12 SkyScan query
04:55:12 SkyScan query done: ret=0  az=112.995<-7533  ze=4.185<-11721  Statuses=0008 0009
04:55:12 Msec=5250  True Az=112.995  Ze=4.185  Az status=0008  Ze status=0009
04:55:12 Check angles
04:55:12 SkyScan query
04:55:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:55:13 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:55:13 Message to Master queued w/err=0: serial=182351 error=0
04:55:18 Received message from Master: op=Filter serial=182352
04:55:18 Color wheel filter change from 0 to 0
04:55:18 FLIGetFilterPos err=0  currentPosition=0
04:55:18 FLIGetStepsRemaining err=0  RemainingSteps=0
04:55:18 Filter is already there-color wheel unchanged
04:55:18 Received message from Master: op=Shutter serial=182353
04:55:18 Shutter LASER close
04:55:18 Received message from Camera: op=State serial=182355
04:55:18 GetSingleValue result=40  Value=cccccccc
04:55:18 SkyScan query
04:55:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:55:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:55:19 Parameters OK
04:55:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:55:19 Set A/D data flow result=40
04:55:19 Set A/D channel type result=40
04:55:19 Set A/D encoding result=40
04:55:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:55:19 Set channel filter=0.000000e+000  result=40
04:55:19 Config A/D  Result=40
04:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:55:19 Get A/D filter: -9.255963e+061  result=40
04:55:19 Get A/D value=-858993460  result=40
04:55:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:55:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:55:19 Parameters OK
04:55:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:55:19 Set A/D data flow result=40
04:55:19 Set A/D channel type result=40
04:55:19 Set A/D encoding result=40
04:55:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:55:19 Set channel filter=0.000000e+000  result=40
04:55:19 Config A/D  Result=40
04:55:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:55:19 Get A/D filter: -9.255963e+061  result=40
04:55:19 Get A/D value=-858993460  result=40
04:55:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:55:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:55:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:55:19 Aux=
04:55:19 Message to Camera, serial 182355 queued
04:55:56 Received message from Master: op=PointingHead serial=182368
04:55:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:55:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:55:56 Point started: ret=0
04:55:56 point_skyscan result=0
04:55:57 Check angles
04:55:57 SkyScan query
04:55:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:55:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:55:57 Message to Master queued w/err=0: serial=182368 error=0
04:56:02 Received message from Master: op=Filter serial=182369
04:56:02 Color wheel filter change from 0 to 0
04:56:02 FLIGetFilterPos err=0  currentPosition=0
04:56:02 FLIGetStepsRemaining err=0  RemainingSteps=0
04:56:02 Filter is already there-color wheel unchanged
04:56:03 Received message from Master: op=Shutter serial=182370
04:56:03 Shutter LASER close
04:56:03 Received message from Camera: op=State serial=182372
04:56:03 GetSingleValue result=40  Value=cccccccc
04:56:03 SkyScan query
04:56:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:56:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:56:03 Parameters OK
04:56:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:56:03 Set A/D data flow result=40
04:56:03 Set A/D channel type result=40
04:56:03 Set A/D encoding result=40
04:56:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:56:03 Set channel filter=0.000000e+000  result=40
04:56:03 Config A/D  Result=40
04:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:56:03 Get A/D filter: -9.255963e+061  result=40
04:56:03 Get A/D value=-858993460  result=40
04:56:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:56:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:56:03 Parameters OK
04:56:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:56:03 Set A/D data flow result=40
04:56:03 Set A/D channel type result=40
04:56:03 Set A/D encoding result=40
04:56:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:56:03 Set channel filter=0.000000e+000  result=40
04:56:03 Config A/D  Result=40
04:56:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:56:03 Get A/D filter: -9.255963e+061  result=40
04:56:03 Get A/D value=-858993460  result=40
04:56:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:56:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:56:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:56:03 Aux=
04:56:03 Message to Camera, serial 182372 queued
04:56:40 Received message from Master: op=PointingHead serial=182385
04:56:40 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
04:56:40 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
04:56:40 Point started: ret=0
04:56:40 point_skyscan result=0
04:56:41 Check angles
04:56:41 SkyScan query
04:56:42 SkyScan query done: ret=0  az=135.945<-9063  ze=-6.495<-12433  Statuses=0009 0008
04:56:42 Msec=0  True Az=135.945  Ze=-6.495  Az status=0009  Ze status=0008
04:56:42 Check angles
04:56:42 SkyScan query
04:56:42 SkyScan query done: ret=0  az=153.345<-10223  ze=-6.48<-12432  Statuses=0009 0008
04:56:42 Msec=750  True Az=153.345  Ze=-6.48  Az status=0009  Ze status=0008
04:56:43 Check angles
04:56:43 SkyScan query
04:56:43 SkyScan query done: ret=0  az=170.85<-11390  ze=-6.48<-12432  Statuses=0009 0008
04:56:43 Msec=1500  True Az=170.85  Ze=-6.48  Az status=0009  Ze status=0008
04:56:43 Check angles
04:56:43 SkyScan query
04:56:44 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:56:44 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
04:56:44 Message to Master queued w/err=0: serial=182385 error=0
04:56:49 Received message from Master: op=Filter serial=182386
04:56:49 Color wheel filter change from 0 to 0
04:56:49 FLIGetFilterPos err=0  currentPosition=0
04:56:49 FLIGetStepsRemaining err=0  RemainingSteps=0
04:56:49 Filter is already there-color wheel unchanged
04:56:49 Received message from Master: op=Shutter serial=182387
04:56:49 Shutter LASER close
04:56:49 Received message from Camera: op=State serial=182389
04:56:49 GetSingleValue result=40  Value=cccccccc
04:56:49 SkyScan query
04:56:50 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
04:56:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:56:50 Parameters OK
04:56:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:56:50 Set A/D data flow result=40
04:56:50 Set A/D channel type result=40
04:56:50 Set A/D encoding result=40
04:56:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:56:50 Set channel filter=0.000000e+000  result=40
04:56:50 Config A/D  Result=40
04:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:56:50 Get A/D filter: -9.255963e+061  result=40
04:56:50 Get A/D value=-858993460  result=40
04:56:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:56:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:56:50 Parameters OK
04:56:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:56:50 Set A/D data flow result=40
04:56:50 Set A/D channel type result=40
04:56:50 Set A/D encoding result=40
04:56:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:56:50 Set channel filter=0.000000e+000  result=40
04:56:50 Config A/D  Result=40
04:56:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:56:50 Get A/D filter: -9.255963e+061  result=40
04:56:50 Get A/D value=-858993460  result=40
04:56:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:56:50 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:56:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:56:50 Aux=
04:56:50 Message to Camera, serial 182389 queued
04:57:27 Received message from Master: op=PointingHead serial=182402
04:57:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:57:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:57:27 Point started: ret=0
04:57:27 point_skyscan result=0
04:57:28 Check angles
04:57:28 SkyScan query
04:57:28 SkyScan query done: ret=0  az=152.55<-10170  ze=6.51<-11566  Statuses=0009 0008
04:57:28 Msec=0  True Az=152.55  Ze=6.51  Az status=0009  Ze status=0008
04:57:29 Check angles
04:57:29 SkyScan query
04:57:29 SkyScan query done: ret=0  az=134.64<-8976  ze=6.495<-11567  Statuses=0009 0008
04:57:29 Msec=750  True Az=134.64  Ze=6.495  Az status=0009  Ze status=0008
04:57:29 Check angles
04:57:29 SkyScan query
04:57:30 SkyScan query done: ret=0  az=117.27<-7818  ze=6.495<-11567  Statuses=0009 0008
04:57:30 Msec=1500  True Az=117.27  Ze=6.495  Az status=0009  Ze status=0008
04:57:30 Check angles
04:57:30 SkyScan query
04:57:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:57:31 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:57:31 Message to Master queued w/err=0: serial=182402 error=0
04:57:36 Received message from Master: op=Filter serial=182403
04:57:36 Color wheel filter change from 0 to 0
04:57:36 FLIGetFilterPos err=0  currentPosition=0
04:57:36 FLIGetStepsRemaining err=0  RemainingSteps=0
04:57:36 Filter is already there-color wheel unchanged
04:57:36 Received message from Master: op=Shutter serial=182404
04:57:36 Shutter LASER close
04:57:36 Received message from Camera: op=State serial=182406
04:57:36 GetSingleValue result=40  Value=cccccccc
04:57:36 SkyScan query
04:57:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:57:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:57:36 Parameters OK
04:57:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:57:36 Set A/D data flow result=40
04:57:36 Set A/D channel type result=40
04:57:36 Set A/D encoding result=40
04:57:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:57:36 Set channel filter=0.000000e+000  result=40
04:57:36 Config A/D  Result=40
04:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:57:36 Get A/D filter: -9.255963e+061  result=40
04:57:36 Get A/D value=-858993460  result=40
04:57:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:57:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:57:36 Parameters OK
04:57:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:57:36 Set A/D data flow result=40
04:57:36 Set A/D channel type result=40
04:57:36 Set A/D encoding result=40
04:57:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:57:36 Set channel filter=0.000000e+000  result=40
04:57:36 Config A/D  Result=40
04:57:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:57:36 Get A/D filter: -9.255963e+061  result=40
04:57:36 Get A/D value=-858993460  result=40
04:57:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:57:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:57:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:57:36 Aux=
04:57:36 Message to Camera, serial 182406 queued
04:58:13 Received message from Master: op=PointingHead serial=182419
04:58:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
04:58:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
04:58:14 Point started: ret=0
04:58:14 point_skyscan result=0
04:58:14 Check angles
04:58:14 SkyScan query
04:58:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
04:58:15 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
04:58:15 Check angles
04:58:15 SkyScan query
04:58:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
04:58:16 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
04:58:16 Check angles
04:58:16 SkyScan query
04:58:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.49<-16366  Statuses=0008 0009
04:58:16 Msec=1500  True Az=112.995  Ze=-65.49  Az status=0008  Ze status=0009
04:58:17 Check angles
04:58:17 SkyScan query
04:58:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.385<-17759  Statuses=0008 0009
04:58:17 Msec=2250  True Az=112.995  Ze=-86.385  Az status=0008  Ze status=0009
04:58:17 Check angles
04:58:17 SkyScan query
04:58:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.325<-19155  Statuses=0008 0009
04:58:18 Msec=3000  True Az=112.995  Ze=-107.325  Az status=0008  Ze status=0009
04:58:18 Check angles
04:58:18 SkyScan query
04:58:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.265<-20551  Statuses=0008 0009
04:58:19 Msec=3750  True Az=112.995  Ze=-128.265  Az status=0008  Ze status=0009
04:58:19 Check angles
04:58:19 SkyScan query
04:58:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.265<-21951  Statuses=0008 0009
04:58:19 Msec=4500  True Az=112.995  Ze=-149.265  Az status=0008  Ze status=0009
04:58:20 Check angles
04:58:20 SkyScan query
04:58:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.205<-23347  Statuses=0008 0009
04:58:20 Msec=5250  True Az=112.995  Ze=-170.205  Az status=0008  Ze status=0009
04:58:20 Check angles
04:58:20 SkyScan query
04:58:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
04:58:21 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
04:58:21 Message to Master queued w/err=0: serial=182419 error=0
04:58:26 Received message from Master: op=Filter serial=182420
04:58:26 Color wheel filter change from 0 to 0
04:58:26 FLIGetFilterPos err=0  currentPosition=0
04:58:26 FLIGetStepsRemaining err=0  RemainingSteps=0
04:58:26 Filter is already there-color wheel unchanged
04:58:26 Received message from Master: op=Shutter serial=182421
04:58:26 Shutter LASER open
04:58:26 Received message from Camera: op=State serial=182423
04:58:26 GetSingleValue result=40  Value=cccccccc
04:58:26 SkyScan query
04:58:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
04:58:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:27 Parameters OK
04:58:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:27 Set A/D data flow result=40
04:58:27 Set A/D channel type result=40
04:58:27 Set A/D encoding result=40
04:58:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:27 Set channel filter=0.000000e+000  result=40
04:58:27 Config A/D  Result=40
04:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:27 Get A/D filter: -9.255963e+061  result=40
04:58:27 Get A/D value=-858993460  result=40
04:58:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:27 Parameters OK
04:58:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:27 Set A/D data flow result=40
04:58:27 Set A/D channel type result=40
04:58:27 Set A/D encoding result=40
04:58:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:27 Set channel filter=0.000000e+000  result=40
04:58:27 Config A/D  Result=40
04:58:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:27 Get A/D filter: -9.255963e+061  result=40
04:58:27 Get A/D value=-858993460  result=40
04:58:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:58:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:58:27 Aux=
04:58:27 Message to Camera, serial 182423 queued
04:58:35 Received message from Master: op=Shutter serial=182433
04:58:35 Shutter LASER close
04:58:36 Received message from Master: op=PointingHead serial=182437
04:58:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:58:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:58:36 Point started: ret=0
04:58:36 point_skyscan result=0
04:58:37 Check angles
04:58:37 SkyScan query
04:58:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.74<-21516  Statuses=0008 0009
04:58:37 Msec=0  True Az=112.995  Ze=-142.74  Az status=0008  Ze status=0009
04:58:38 Check angles
04:58:38 SkyScan query
04:58:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.785<-20119  Statuses=0008 0009
04:58:38 Msec=750  True Az=112.995  Ze=-121.785  Az status=0008  Ze status=0009
04:58:38 Check angles
04:58:38 SkyScan query
04:58:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
04:58:39 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
04:58:39 Check angles
04:58:39 SkyScan query
04:58:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.44<-17296  Statuses=0008 0009
04:58:40 Msec=2250  True Az=112.995  Ze=-79.44  Az status=0008  Ze status=0009
04:58:40 Check angles
04:58:40 SkyScan query
04:58:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.485<-15899  Statuses=0008 0009
04:58:40 Msec=3000  True Az=112.995  Ze=-58.485  Az status=0008  Ze status=0009
04:58:41 Check angles
04:58:41 SkyScan query
04:58:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
04:58:41 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
04:58:41 Check angles
04:58:41 SkyScan query
04:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.125<-13075  Statuses=0008 0009
04:58:42 Msec=4500  True Az=112.995  Ze=-16.125  Az status=0008  Ze status=0009
04:58:42 Check angles
04:58:42 SkyScan query
04:58:43 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
04:58:43 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
04:58:43 Check angles
04:58:43 SkyScan query
04:58:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
04:58:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
04:58:43 Message to Master queued w/err=0: serial=182437 error=0
04:58:48 Received message from Master: op=Filter serial=182438
04:58:48 Color wheel filter change from 0 to 0
04:58:48 FLIGetFilterPos err=0  currentPosition=0
04:58:48 FLIGetStepsRemaining err=0  RemainingSteps=0
04:58:48 Filter is already there-color wheel unchanged
04:58:49 Received message from Master: op=Shutter serial=182439
04:58:49 Shutter LASER close
04:58:49 Received message from Camera: op=State serial=182441
04:58:49 GetSingleValue result=40  Value=cccccccc
04:58:49 SkyScan query
04:58:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:58:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:49 Parameters OK
04:58:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:49 Set A/D data flow result=40
04:58:49 Set A/D channel type result=40
04:58:49 Set A/D encoding result=40
04:58:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:49 Set channel filter=0.000000e+000  result=40
04:58:49 Config A/D  Result=40
04:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:49 Get A/D filter: -9.255963e+061  result=40
04:58:49 Get A/D value=-858993460  result=40
04:58:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:58:49 Parameters OK
04:58:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:58:49 Set A/D data flow result=40
04:58:49 Set A/D channel type result=40
04:58:49 Set A/D encoding result=40
04:58:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:58:49 Set channel filter=0.000000e+000  result=40
04:58:49 Config A/D  Result=40
04:58:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:58:49 Get A/D filter: -9.255963e+061  result=40
04:58:49 Get A/D value=-858993460  result=40
04:58:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:58:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:58:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:58:49 Aux=
04:58:49 Message to Camera, serial 182441 queued
04:59:26 Received message from Master: op=PointingHead serial=182454
04:59:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
04:59:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
04:59:27 Point started: ret=0
04:59:27 point_skyscan result=0
04:59:27 Check angles
04:59:27 SkyScan query
04:59:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:59:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
04:59:28 Message to Master queued w/err=0: serial=182454 error=0
04:59:33 Received message from Master: op=Filter serial=182455
04:59:33 Color wheel filter change from 0 to 0
04:59:33 FLIGetFilterPos err=0  currentPosition=0
04:59:33 FLIGetStepsRemaining err=0  RemainingSteps=0
04:59:33 Filter is already there-color wheel unchanged
04:59:33 Received message from Master: op=Shutter serial=182456
04:59:33 Shutter LASER close
04:59:33 Received message from Camera: op=State serial=182458
04:59:33 GetSingleValue result=40  Value=cccccccc
04:59:33 SkyScan query
04:59:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
04:59:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:59:34 Parameters OK
04:59:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:59:34 Set A/D data flow result=40
04:59:34 Set A/D channel type result=40
04:59:34 Set A/D encoding result=40
04:59:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:59:34 Set channel filter=0.000000e+000  result=40
04:59:34 Config A/D  Result=40
04:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:59:34 Get A/D filter: -9.255963e+061  result=40
04:59:34 Get A/D value=-858993460  result=40
04:59:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:59:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
04:59:34 Parameters OK
04:59:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
04:59:34 Set A/D data flow result=40
04:59:34 Set A/D channel type result=40
04:59:34 Set A/D encoding result=40
04:59:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
04:59:34 Set channel filter=0.000000e+000  result=40
04:59:34 Config A/D  Result=40
04:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
04:59:34 Get A/D filter: -9.255963e+061  result=40
04:59:34 Get A/D value=-858993460  result=40
04:59:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
04:59:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
04:59:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
04:59:34 Aux=
04:59:34 Message to Camera, serial 182458 queued
05:00:10 Received message from Master: op=PointingHead serial=182471
05:00:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:00:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:00:11 Point started: ret=0
05:00:11 point_skyscan result=0
05:00:12 Check angles
05:00:12 SkyScan query
05:00:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:00:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:00:12 Message to Master queued w/err=0: serial=182471 error=0
05:00:17 Received message from Master: op=Filter serial=182472
05:00:17 Color wheel filter change from 0 to 0
05:00:17 FLIGetFilterPos err=0  currentPosition=0
05:00:17 FLIGetStepsRemaining err=0  RemainingSteps=0
05:00:17 Filter is already there-color wheel unchanged
05:00:17 Received message from Master: op=Shutter serial=182473
05:00:17 Shutter LASER close
05:00:17 Received message from Camera: op=State serial=182475
05:00:17 GetSingleValue result=40  Value=cccccccc
05:00:17 SkyScan query
05:00:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:00:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:00:18 Parameters OK
05:00:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:00:18 Set A/D data flow result=40
05:00:18 Set A/D channel type result=40
05:00:18 Set A/D encoding result=40
05:00:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:00:18 Set channel filter=0.000000e+000  result=40
05:00:18 Config A/D  Result=40
05:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:00:18 Get A/D filter: -9.255963e+061  result=40
05:00:18 Get A/D value=-858993460  result=40
05:00:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:00:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:00:18 Parameters OK
05:00:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:00:18 Set A/D data flow result=40
05:00:18 Set A/D channel type result=40
05:00:18 Set A/D encoding result=40
05:00:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:00:18 Set channel filter=0.000000e+000  result=40
05:00:18 Config A/D  Result=40
05:00:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:00:18 Get A/D filter: -9.255963e+061  result=40
05:00:18 Get A/D value=-858993460  result=40
05:00:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:00:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:00:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:00:18 Aux=
05:00:18 Message to Camera, serial 182475 queued
05:00:55 Received message from Master: op=PointingHead serial=182488
05:00:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:00:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:00:55 Point started: ret=0
05:00:55 point_skyscan result=0
05:00:56 Check angles
05:00:56 SkyScan query
05:00:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:00:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:00:56 Message to Master queued w/err=0: serial=182488 error=0
05:01:01 Received message from Master: op=Filter serial=182489
05:01:01 Color wheel filter change from 0 to 0
05:01:01 FLIGetFilterPos err=0  currentPosition=0
05:01:01 FLIGetStepsRemaining err=0  RemainingSteps=0
05:01:01 Filter is already there-color wheel unchanged
05:01:02 Received message from Master: op=Shutter serial=182490
05:01:02 Shutter LASER close
05:01:02 Received message from Camera: op=State serial=182492
05:01:02 GetSingleValue result=40  Value=cccccccc
05:01:02 SkyScan query
05:01:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:01:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:01:02 Parameters OK
05:01:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:01:02 Set A/D data flow result=40
05:01:02 Set A/D channel type result=40
05:01:02 Set A/D encoding result=40
05:01:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:01:02 Set channel filter=0.000000e+000  result=40
05:01:02 Config A/D  Result=40
05:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:01:02 Get A/D filter: -9.255963e+061  result=40
05:01:02 Get A/D value=-858993460  result=40
05:01:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:01:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:01:02 Parameters OK
05:01:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:01:02 Set A/D data flow result=40
05:01:02 Set A/D channel type result=40
05:01:02 Set A/D encoding result=40
05:01:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:01:02 Set channel filter=0.000000e+000  result=40
05:01:02 Config A/D  Result=40
05:01:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:01:02 Get A/D filter: -9.255963e+061  result=40
05:01:02 Get A/D value=-858993460  result=40
05:01:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:01:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:01:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:01:02 Aux=
05:01:02 Message to Camera, serial 182492 queued
05:01:39 Received message from Master: op=PointingHead serial=182505
05:01:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:01:39 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:01:39 Point started: ret=0
05:01:39 point_skyscan result=0
05:01:40 Check angles
05:01:40 SkyScan query
05:01:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.175<-13545  Statuses=0008 0009
05:01:41 Msec=0  True Az=112.995  Ze=-23.175  Az status=0008  Ze status=0009
05:01:41 Check angles
05:01:41 SkyScan query
05:01:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
05:01:42 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
05:01:42 Check angles
05:01:42 SkyScan query
05:01:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.55<-16370  Statuses=0008 0009
05:01:42 Msec=1500  True Az=112.995  Ze=-65.55  Az status=0008  Ze status=0009
05:01:42 Check angles
05:01:42 SkyScan query
05:01:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.505<-17767  Statuses=0008 0009
05:01:43 Msec=2250  True Az=112.995  Ze=-86.505  Az status=0008  Ze status=0009
05:01:43 Check angles
05:01:43 SkyScan query
05:01:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.46<-19164  Statuses=0008 0009
05:01:44 Msec=3000  True Az=112.995  Ze=-107.46  Az status=0008  Ze status=0009
05:01:44 Check angles
05:01:44 SkyScan query
05:01:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.385<-20559  Statuses=0008 0009
05:01:45 Msec=3750  True Az=112.995  Ze=-128.385  Az status=0008  Ze status=0009
05:01:45 Check angles
05:01:45 SkyScan query
05:01:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.37<-21958  Statuses=0008 0009
05:01:45 Msec=4500  True Az=112.995  Ze=-149.37  Az status=0008  Ze status=0009
05:01:45 Check angles
05:01:45 SkyScan query
05:01:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.295<-23353  Statuses=0008 0009
05:01:46 Msec=5250  True Az=112.995  Ze=-170.295  Az status=0008  Ze status=0009
05:01:46 Check angles
05:01:46 SkyScan query
05:01:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:01:47 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:01:47 Message to Master queued w/err=0: serial=182505 error=0
05:01:52 Received message from Master: op=Filter serial=182506
05:01:52 Color wheel filter change from 0 to 0
05:01:52 FLIGetFilterPos err=0  currentPosition=0
05:01:52 FLIGetStepsRemaining err=0  RemainingSteps=0
05:01:52 Filter is already there-color wheel unchanged
05:01:52 Received message from Master: op=Shutter serial=182507
05:01:52 Shutter LASER open
05:01:52 Received message from Camera: op=State serial=182509
05:01:52 GetSingleValue result=40  Value=cccccccc
05:01:52 SkyScan query
05:01:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:01:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:01:53 Parameters OK
05:01:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:01:53 Set A/D data flow result=40
05:01:53 Set A/D channel type result=40
05:01:53 Set A/D encoding result=40
05:01:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:01:53 Set channel filter=0.000000e+000  result=40
05:01:53 Config A/D  Result=40
05:01:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:01:53 Get A/D filter: -9.255963e+061  result=40
05:01:53 Get A/D value=-858993460  result=40
05:01:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:01:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:01:53 Parameters OK
05:01:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:01:53 Set A/D data flow result=40
05:01:53 Set A/D channel type result=40
05:01:53 Set A/D encoding result=40
05:01:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:01:53 Set channel filter=0.000000e+000  result=40
05:01:53 Config A/D  Result=40
05:01:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:01:53 Get A/D filter: -9.255963e+061  result=40
05:01:53 Get A/D value=-858993460  result=40
05:01:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:01:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:01:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:01:53 Aux=
05:01:53 Message to Camera, serial 182509 queued
05:02:01 Received message from Master: op=Shutter serial=182519
05:02:01 Shutter LASER close
05:02:02 Received message from Master: op=PointingHead serial=182523
05:02:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:02:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:02:02 Point started: ret=0
05:02:02 point_skyscan result=0
05:02:03 Check angles
05:02:03 SkyScan query
05:02:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.34<-21556  Statuses=0008 0009
05:02:04 Msec=0  True Az=112.995  Ze=-143.34  Az status=0008  Ze status=0009
05:02:04 Check angles
05:02:04 SkyScan query
05:02:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.4<-20160  Statuses=0008 0009
05:02:04 Msec=750  True Az=112.995  Ze=-122.4  Az status=0008  Ze status=0009
05:02:04 Check angles
05:02:04 SkyScan query
05:02:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.43<-18762  Statuses=0008 0009
05:02:05 Msec=1500  True Az=112.995  Ze=-101.43  Az status=0008  Ze status=0009
05:02:05 Check angles
05:02:05 SkyScan query
05:02:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.46<-17364  Statuses=0008 0009
05:02:06 Msec=2250  True Az=112.995  Ze=-80.46  Az status=0008  Ze status=0009
05:02:06 Check angles
05:02:06 SkyScan query
05:02:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.52<-15968  Statuses=0008 0009
05:02:07 Msec=3000  True Az=112.995  Ze=-59.52  Az status=0008  Ze status=0009
05:02:07 Check angles
05:02:07 SkyScan query
05:02:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.565<-14571  Statuses=0008 0009
05:02:07 Msec=3750  True Az=112.995  Ze=-38.565  Az status=0008  Ze status=0009
05:02:07 Check angles
05:02:07 SkyScan query
05:02:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.61<-13174  Statuses=0008 0009
05:02:08 Msec=4500  True Az=112.995  Ze=-17.61  Az status=0008  Ze status=0009
05:02:08 Check angles
05:02:08 SkyScan query
05:02:09 SkyScan query done: ret=0  az=112.995<-7533  ze=3.345<-11777  Statuses=0008 0009
05:02:09 Msec=5250  True Az=112.995  Ze=3.345  Az status=0008  Ze status=0009
05:02:09 Check angles
05:02:09 SkyScan query
05:02:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:02:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:02:10 Message to Master queued w/err=0: serial=182523 error=0
05:02:15 Received message from Master: op=Filter serial=182524
05:02:15 Color wheel filter change from 0 to 0
05:02:15 FLIGetFilterPos err=0  currentPosition=0
05:02:15 FLIGetStepsRemaining err=0  RemainingSteps=0
05:02:15 Filter is already there-color wheel unchanged
05:02:15 Received message from Master: op=Shutter serial=182525
05:02:15 Shutter LASER close
05:02:15 Received message from Camera: op=State serial=182527
05:02:15 GetSingleValue result=40  Value=cccccccc
05:02:15 SkyScan query
05:02:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:02:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:02:15 Parameters OK
05:02:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:02:15 Set A/D data flow result=40
05:02:15 Set A/D channel type result=40
05:02:15 Set A/D encoding result=40
05:02:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:02:15 Set channel filter=0.000000e+000  result=40
05:02:15 Config A/D  Result=40
05:02:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:02:15 Get A/D filter: -9.255963e+061  result=40
05:02:15 Get A/D value=-858993460  result=40
05:02:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:02:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:02:15 Parameters OK
05:02:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:02:15 Set A/D data flow result=40
05:02:15 Set A/D channel type result=40
05:02:15 Set A/D encoding result=40
05:02:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:02:15 Set channel filter=0.000000e+000  result=40
05:02:15 Config A/D  Result=40
05:02:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:02:15 Get A/D filter: -9.255963e+061  result=40
05:02:15 Get A/D value=-858993460  result=40
05:02:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:02:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:02:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:02:15 Aux=
05:02:15 Message to Camera, serial 182527 queued
05:02:52 Received message from Master: op=PointingHead serial=182540
05:02:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:02:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:02:53 Point started: ret=0
05:02:53 point_skyscan result=0
05:02:53 Check angles
05:02:53 SkyScan query
05:02:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:02:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:02:54 Message to Master queued w/err=0: serial=182540 error=0
05:02:59 Received message from Master: op=Filter serial=182541
05:02:59 Color wheel filter change from 0 to 0
05:02:59 FLIGetFilterPos err=0  currentPosition=0
05:02:59 FLIGetStepsRemaining err=0  RemainingSteps=0
05:02:59 Filter is already there-color wheel unchanged
05:02:59 Received message from Master: op=Shutter serial=182542
05:02:59 Shutter LASER close
05:02:59 Received message from Camera: op=State serial=182544
05:02:59 GetSingleValue result=40  Value=cccccccc
05:02:59 SkyScan query
05:03:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:03:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:03:00 Parameters OK
05:03:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:03:00 Set A/D data flow result=40
05:03:00 Set A/D channel type result=40
05:03:00 Set A/D encoding result=40
05:03:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:03:00 Set channel filter=0.000000e+000  result=40
05:03:00 Config A/D  Result=40
05:03:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:03:00 Get A/D filter: -9.255963e+061  result=40
05:03:00 Get A/D value=-858993460  result=40
05:03:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:03:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:03:00 Parameters OK
05:03:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:03:00 Set A/D data flow result=40
05:03:00 Set A/D channel type result=40
05:03:00 Set A/D encoding result=40
05:03:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:03:00 Set channel filter=0.000000e+000  result=40
05:03:00 Config A/D  Result=40
05:03:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:03:00 Get A/D filter: -9.255963e+061  result=40
05:03:00 Get A/D value=-858993460  result=40
05:03:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:03:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:03:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:03:00 Aux=
05:03:00 Message to Camera, serial 182544 queued
05:03:36 Received message from Master: op=Identify serial=182557
05:03:37 Received message from Master: op=PointingHead serial=182560
05:03:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:03:37 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:03:37 Point started: ret=0
05:03:37 point_skyscan result=0
05:03:38 Check angles
05:03:38 SkyScan query
05:03:38 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
05:03:38 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
05:03:38 Check angles
05:03:38 SkyScan query
05:03:39 SkyScan query done: ret=0  az=153.72<-10248  ze=-6.495<-12433  Statuses=0009 0008
05:03:39 Msec=750  True Az=153.72  Ze=-6.495  Az status=0009  Ze status=0008
05:03:39 Check angles
05:03:39 SkyScan query
05:03:40 SkyScan query done: ret=0  az=171.615<-11441  ze=-6.495<-12433  Statuses=0009 0008
05:03:40 Msec=1500  True Az=171.615  Ze=-6.495  Az status=0009  Ze status=0008
05:03:40 Check angles
05:03:40 SkyScan query
05:03:40 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:03:40 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:03:40 Message to Master queued w/err=0: serial=182560 error=0
05:03:45 Received message from Master: op=Filter serial=182561
05:03:45 Color wheel filter change from 0 to 0
05:03:45 FLIGetFilterPos err=0  currentPosition=0
05:03:45 FLIGetStepsRemaining err=0  RemainingSteps=0
05:03:45 Filter is already there-color wheel unchanged
05:03:46 Received message from Master: op=Shutter serial=182562
05:03:46 Shutter LASER close
05:03:46 Received message from Camera: op=State serial=182564
05:03:46 GetSingleValue result=40  Value=cccccccc
05:03:46 SkyScan query
05:03:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:03:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:03:46 Parameters OK
05:03:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:03:46 Set A/D data flow result=40
05:03:46 Set A/D channel type result=40
05:03:46 Set A/D encoding result=40
05:03:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:03:46 Set channel filter=0.000000e+000  result=40
05:03:46 Config A/D  Result=40
05:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:03:46 Get A/D filter: -9.255963e+061  result=40
05:03:46 Get A/D value=-858993460  result=40
05:03:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:03:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:03:46 Parameters OK
05:03:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:03:46 Set A/D data flow result=40
05:03:46 Set A/D channel type result=40
05:03:46 Set A/D encoding result=40
05:03:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:03:46 Set channel filter=0.000000e+000  result=40
05:03:46 Config A/D  Result=40
05:03:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:03:46 Get A/D filter: -9.255963e+061  result=40
05:03:46 Get A/D value=-858993460  result=40
05:03:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:03:46 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:03:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:03:46 Aux=
05:03:46 Message to Camera, serial 182564 queued
[UTC 2019-3-9  05:03:48]
05:04:23 Received message from Master: op=PointingHead serial=182577
05:04:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:04:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:04:23 Point started: ret=0
05:04:23 point_skyscan result=0
05:04:24 Check angles
05:04:24 SkyScan query
05:04:25 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
05:04:25 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
05:04:25 Check angles
05:04:25 SkyScan query
05:04:26 SkyScan query done: ret=0  az=135.54<-9036  ze=6.495<-11567  Statuses=0009 0008
05:04:26 Msec=750  True Az=135.54  Ze=6.495  Az status=0009  Ze status=0008
05:04:26 Check angles
05:04:26 SkyScan query
05:04:26 SkyScan query done: ret=0  az=118.08<-7872  ze=6.495<-11567  Statuses=0009 0008
05:04:26 Msec=1500  True Az=118.08  Ze=6.495  Az status=0009  Ze status=0008
05:04:26 Check angles
05:04:26 SkyScan query
05:04:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:04:27 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:04:27 Message to Master queued w/err=0: serial=182577 error=0
05:04:32 Received message from Master: op=Filter serial=182578
05:04:32 Color wheel filter change from 0 to 0
05:04:32 FLIGetFilterPos err=0  currentPosition=0
05:04:32 FLIGetStepsRemaining err=0  RemainingSteps=0
05:04:32 Filter is already there-color wheel unchanged
05:04:32 Received message from Master: op=Shutter serial=182579
05:04:32 Shutter LASER close
05:04:32 Received message from Camera: op=State serial=182581
05:04:32 GetSingleValue result=40  Value=cccccccc
05:04:32 SkyScan query
05:04:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:04:33 Parameters OK
05:04:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:04:33 Set A/D data flow result=40
05:04:33 Set A/D channel type result=40
05:04:33 Set A/D encoding result=40
05:04:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:04:33 Set channel filter=0.000000e+000  result=40
05:04:33 Config A/D  Result=40
05:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:04:33 Get A/D filter: -9.255963e+061  result=40
05:04:33 Get A/D value=-858993460  result=40
05:04:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:04:33 Parameters OK
05:04:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:04:33 Set A/D data flow result=40
05:04:33 Set A/D channel type result=40
05:04:33 Set A/D encoding result=40
05:04:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:04:33 Set channel filter=0.000000e+000  result=40
05:04:33 Config A/D  Result=40
05:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:04:33 Get A/D filter: -9.255963e+061  result=40
05:04:33 Get A/D value=-858993460  result=40
05:04:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:04:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:04:33 Aux=
05:04:33 Message to Camera, serial 182581 queued
05:05:10 Received message from Master: op=PointingHead serial=182594
05:05:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:05:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:05:10 Point started: ret=0
05:05:10 point_skyscan result=0
05:05:11 Check angles
05:05:11 SkyScan query
05:05:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.19<-13546  Statuses=0008 0009
05:05:11 Msec=0  True Az=112.995  Ze=-23.19  Az status=0008  Ze status=0009
05:05:12 Check angles
05:05:12 SkyScan query
05:05:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
05:05:12 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
05:05:12 Check angles
05:05:12 SkyScan query
05:05:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.97<-16398  Statuses=0008 0009
05:05:13 Msec=1500  True Az=112.995  Ze=-65.97  Az status=0008  Ze status=0009
05:05:13 Check angles
05:05:13 SkyScan query
05:05:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.925<-17795  Statuses=0008 0009
05:05:14 Msec=2250  True Az=112.995  Ze=-86.925  Az status=0008  Ze status=0009
05:05:14 Check angles
05:05:14 SkyScan query
05:05:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.88<-19192  Statuses=0008 0009
05:05:14 Msec=3000  True Az=112.995  Ze=-107.88  Az status=0008  Ze status=0009
05:05:15 Check angles
05:05:15 SkyScan query
05:05:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.82<-20588  Statuses=0008 0009
05:05:15 Msec=3750  True Az=112.995  Ze=-128.82  Az status=0008  Ze status=0009
05:05:15 Check angles
05:05:15 SkyScan query
05:05:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.79<-21986  Statuses=0008 0009
05:05:16 Msec=4500  True Az=112.995  Ze=-149.79  Az status=0008  Ze status=0009
05:05:16 Check angles
05:05:16 SkyScan query
05:05:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.7<-23380  Statuses=0008 0009
05:05:17 Msec=5250  True Az=112.995  Ze=-170.7  Az status=0008  Ze status=0009
05:05:17 Check angles
05:05:17 SkyScan query
05:05:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:05:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:05:17 Message to Master queued w/err=0: serial=182594 error=0
05:05:22 Received message from Master: op=Filter serial=182595
05:05:22 Color wheel filter change from 0 to 0
05:05:22 FLIGetFilterPos err=0  currentPosition=0
05:05:22 FLIGetStepsRemaining err=0  RemainingSteps=0
05:05:22 Filter is already there-color wheel unchanged
05:05:23 Received message from Master: op=Shutter serial=182596
05:05:23 Shutter LASER open
05:05:23 Received message from Camera: op=State serial=182598
05:05:23 GetSingleValue result=40  Value=cccccccc
05:05:23 SkyScan query
05:05:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:05:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:05:23 Parameters OK
05:05:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:05:23 Set A/D data flow result=40
05:05:23 Set A/D channel type result=40
05:05:23 Set A/D encoding result=40
05:05:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:05:23 Set channel filter=0.000000e+000  result=40
05:05:23 Config A/D  Result=40
05:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:05:23 Get A/D filter: -9.255963e+061  result=40
05:05:23 Get A/D value=-858993460  result=40
05:05:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:05:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:05:23 Parameters OK
05:05:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:05:23 Set A/D data flow result=40
05:05:23 Set A/D channel type result=40
05:05:23 Set A/D encoding result=40
05:05:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:05:23 Set channel filter=0.000000e+000  result=40
05:05:23 Config A/D  Result=40
05:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:05:23 Get A/D filter: -9.255963e+061  result=40
05:05:23 Get A/D value=-858993460  result=40
05:05:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:05:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:05:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:05:23 Aux=
05:05:23 Message to Camera, serial 182598 queued
05:05:32 Received message from Master: op=Shutter serial=182608
05:05:32 Shutter LASER close
05:05:32 Received message from Master: op=PointingHead serial=182612
05:05:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:05:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:05:32 Point started: ret=0
05:05:32 point_skyscan result=0
05:05:33 Check angles
05:05:33 SkyScan query
05:05:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.505<-21567  Statuses=0008 0009
05:05:34 Msec=0  True Az=112.995  Ze=-143.505  Az status=0008  Ze status=0009
05:05:34 Check angles
05:05:34 SkyScan query
05:05:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.085<-20139  Statuses=0008 0009
05:05:35 Msec=750  True Az=112.995  Ze=-122.085  Az status=0008  Ze status=0009
05:05:35 Check angles
05:05:35 SkyScan query
05:05:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.16<-18744  Statuses=0008 0009
05:05:35 Msec=1500  True Az=112.995  Ze=-101.16  Az status=0008  Ze status=0009
05:05:35 Check angles
05:05:35 SkyScan query
05:05:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
05:05:36 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
05:05:36 Check angles
05:05:36 SkyScan query
05:05:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.25<-15950  Statuses=0008 0009
05:05:37 Msec=3000  True Az=112.995  Ze=-59.25  Az status=0008  Ze status=0009
05:05:37 Check angles
05:05:37 SkyScan query
05:05:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.265<-14551  Statuses=0008 0009
05:05:38 Msec=3750  True Az=112.995  Ze=-38.265  Az status=0008  Ze status=0009
05:05:38 Check angles
05:05:38 SkyScan query
05:05:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.325<-13155  Statuses=0008 0009
05:05:38 Msec=4500  True Az=112.995  Ze=-17.325  Az status=0008  Ze status=0009
05:05:38 Check angles
05:05:38 SkyScan query
05:05:39 SkyScan query done: ret=0  az=112.995<-7533  ze=3.63<-11758  Statuses=0008 0009
05:05:39 Msec=5250  True Az=112.995  Ze=3.63  Az status=0008  Ze status=0009
05:05:39 Check angles
05:05:39 SkyScan query
05:05:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:05:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:05:40 Message to Master queued w/err=0: serial=182612 error=0
05:05:45 Received message from Master: op=Filter serial=182613
05:05:45 Color wheel filter change from 0 to 0
05:05:45 FLIGetFilterPos err=0  currentPosition=0
05:05:45 FLIGetStepsRemaining err=0  RemainingSteps=0
05:05:45 Filter is already there-color wheel unchanged
05:05:45 Received message from Master: op=Shutter serial=182614
05:05:45 Shutter LASER close
05:05:45 Received message from Camera: op=State serial=182616
05:05:45 GetSingleValue result=40  Value=cccccccc
05:05:45 SkyScan query
05:05:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:05:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:05:46 Parameters OK
05:05:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:05:46 Set A/D data flow result=40
05:05:46 Set A/D channel type result=40
05:05:46 Set A/D encoding result=40
05:05:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:05:46 Set channel filter=0.000000e+000  result=40
05:05:46 Config A/D  Result=40
05:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:05:46 Get A/D filter: -9.255963e+061  result=40
05:05:46 Get A/D value=-858993460  result=40
05:05:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:05:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:05:46 Parameters OK
05:05:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:05:46 Set A/D data flow result=40
05:05:46 Set A/D channel type result=40
05:05:46 Set A/D encoding result=40
05:05:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:05:46 Set channel filter=0.000000e+000  result=40
05:05:46 Config A/D  Result=40
05:05:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:05:46 Get A/D filter: -9.255963e+061  result=40
05:05:46 Get A/D value=-858993460  result=40
05:05:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:05:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:05:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:05:46 Aux=
05:05:46 Message to Camera, serial 182616 queued
05:06:23 Received message from Master: op=PointingHead serial=182629
05:06:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:06:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:06:23 Point started: ret=0
05:06:23 point_skyscan result=0
05:06:24 Check angles
05:06:24 SkyScan query
05:06:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:06:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:06:24 Message to Master queued w/err=0: serial=182629 error=0
05:06:29 Received message from Master: op=Filter serial=182630
05:06:29 Color wheel filter change from 0 to 0
05:06:29 FLIGetFilterPos err=0  currentPosition=0
05:06:29 FLIGetStepsRemaining err=0  RemainingSteps=0
05:06:29 Filter is already there-color wheel unchanged
05:06:29 Received message from Master: op=Shutter serial=182631
05:06:29 Shutter LASER close
05:06:29 Received message from Camera: op=State serial=182633
05:06:29 GetSingleValue result=40  Value=cccccccc
05:06:29 SkyScan query
05:06:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:06:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:06:30 Parameters OK
05:06:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:06:30 Set A/D data flow result=40
05:06:30 Set A/D channel type result=40
05:06:30 Set A/D encoding result=40
05:06:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:06:30 Set channel filter=0.000000e+000  result=40
05:06:30 Config A/D  Result=40
05:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:06:30 Get A/D filter: -9.255963e+061  result=40
05:06:30 Get A/D value=-858993460  result=40
05:06:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:06:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:06:30 Parameters OK
05:06:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:06:30 Set A/D data flow result=40
05:06:30 Set A/D channel type result=40
05:06:30 Set A/D encoding result=40
05:06:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:06:30 Set channel filter=0.000000e+000  result=40
05:06:30 Config A/D  Result=40
05:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:06:30 Get A/D filter: -9.255963e+061  result=40
05:06:30 Get A/D value=-858993460  result=40
05:06:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:06:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:06:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:06:30 Aux=
05:06:30 Message to Camera, serial 182633 queued
05:07:06 Received message from Master: op=PointingHead serial=182645
05:07:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:07:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:07:06 Point started: ret=0
05:07:06 point_skyscan result=0
05:07:07 Check angles
05:07:07 SkyScan query
05:07:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:07:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:07:08 Message to Master queued w/err=0: serial=182645 error=0
05:07:13 Received message from Master: op=Filter serial=182646
05:07:13 Color wheel filter change from 0 to 0
05:07:13 FLIGetFilterPos err=0  currentPosition=0
05:07:13 FLIGetStepsRemaining err=0  RemainingSteps=0
05:07:13 Filter is already there-color wheel unchanged
05:07:13 Received message from Master: op=Shutter serial=182647
05:07:13 Shutter LASER close
05:07:13 Received message from Camera: op=State serial=182649
05:07:13 GetSingleValue result=40  Value=cccccccc
05:07:13 SkyScan query
05:07:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:07:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:07:13 Parameters OK
05:07:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:07:13 Set A/D data flow result=40
05:07:13 Set A/D channel type result=40
05:07:13 Set A/D encoding result=40
05:07:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:07:13 Set channel filter=0.000000e+000  result=40
05:07:13 Config A/D  Result=40
05:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:07:13 Get A/D filter: -9.255963e+061  result=40
05:07:13 Get A/D value=-858993460  result=40
05:07:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:07:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:07:13 Parameters OK
05:07:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:07:13 Set A/D data flow result=40
05:07:13 Set A/D channel type result=40
05:07:13 Set A/D encoding result=40
05:07:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:07:13 Set channel filter=0.000000e+000  result=40
05:07:13 Config A/D  Result=40
05:07:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:07:13 Get A/D filter: -9.255963e+061  result=40
05:07:13 Get A/D value=-858993460  result=40
05:07:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:07:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:07:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:07:13 Aux=
05:07:13 Message to Camera, serial 182649 queued
05:07:50 Received message from Master: op=PointingHead serial=182662
05:07:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:07:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:07:51 Point started: ret=0
05:07:51 point_skyscan result=0
05:07:51 Check angles
05:07:51 SkyScan query
05:07:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:07:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:07:52 Message to Master queued w/err=0: serial=182662 error=0
05:07:57 Received message from Master: op=Filter serial=182663
05:07:57 Color wheel filter change from 0 to 0
05:07:57 FLIGetFilterPos err=0  currentPosition=0
05:07:57 FLIGetStepsRemaining err=0  RemainingSteps=0
05:07:57 Filter is already there-color wheel unchanged
05:07:57 Received message from Master: op=Shutter serial=182664
05:07:57 Shutter LASER close
05:07:57 Received message from Camera: op=State serial=182666
05:07:57 GetSingleValue result=40  Value=cccccccc
05:07:57 SkyScan query
05:07:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:07:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:07:58 Parameters OK
05:07:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:07:58 Set A/D data flow result=40
05:07:58 Set A/D channel type result=40
05:07:58 Set A/D encoding result=40
05:07:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:07:58 Set channel filter=0.000000e+000  result=40
05:07:58 Config A/D  Result=40
05:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:07:58 Get A/D filter: -9.255963e+061  result=40
05:07:58 Get A/D value=-858993460  result=40
05:07:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:07:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:07:58 Parameters OK
05:07:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:07:58 Set A/D data flow result=40
05:07:58 Set A/D channel type result=40
05:07:58 Set A/D encoding result=40
05:07:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:07:58 Set channel filter=0.000000e+000  result=40
05:07:58 Config A/D  Result=40
05:07:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:07:58 Get A/D filter: -9.255963e+061  result=40
05:07:58 Get A/D value=-858993460  result=40
05:07:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:07:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:07:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:07:58 Aux=
05:07:58 Message to Camera, serial 182666 queued
05:08:34 Received message from Master: op=PointingHead serial=182679
05:08:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:08:34 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:08:35 Point started: ret=0
05:08:35 point_skyscan result=0
05:08:36 Check angles
05:08:36 SkyScan query
05:08:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.355<-13557  Statuses=0008 0009
05:08:36 Msec=0  True Az=112.995  Ze=-23.355  Az status=0008  Ze status=0009
05:08:36 Check angles
05:08:36 SkyScan query
05:08:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
05:08:37 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
05:08:37 Check angles
05:08:37 SkyScan query
05:08:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.28<-16352  Statuses=0008 0009
05:08:38 Msec=1500  True Az=112.995  Ze=-65.28  Az status=0008  Ze status=0009
05:08:38 Check angles
05:08:38 SkyScan query
05:08:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.235<-17749  Statuses=0008 0009
05:08:38 Msec=2250  True Az=112.995  Ze=-86.235  Az status=0008  Ze status=0009
05:08:39 Check angles
05:08:39 SkyScan query
05:08:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.175<-19145  Statuses=0008 0009
05:08:39 Msec=3000  True Az=112.995  Ze=-107.175  Az status=0008  Ze status=0009
05:08:39 Check angles
05:08:39 SkyScan query
05:08:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.13<-20542  Statuses=0008 0009
05:08:40 Msec=3750  True Az=112.995  Ze=-128.13  Az status=0008  Ze status=0009
05:08:40 Check angles
05:08:40 SkyScan query
05:08:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.1<-21940  Statuses=0008 0009
05:08:41 Msec=4500  True Az=112.995  Ze=-149.1  Az status=0008  Ze status=0009
05:08:41 Check angles
05:08:41 SkyScan query
05:08:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.04<-23336  Statuses=0008 0009
05:08:41 Msec=5250  True Az=112.995  Ze=-170.04  Az status=0008  Ze status=0009
05:08:42 Check angles
05:08:42 SkyScan query
05:08:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:08:42 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:08:42 Message to Master queued w/err=0: serial=182679 error=0
05:08:47 Received message from Master: op=Filter serial=182680
05:08:47 Color wheel filter change from 0 to 0
05:08:47 FLIGetFilterPos err=0  currentPosition=0
05:08:47 FLIGetStepsRemaining err=0  RemainingSteps=0
05:08:47 Filter is already there-color wheel unchanged
05:08:47 Received message from Master: op=Shutter serial=182681
05:08:47 Shutter LASER open
05:08:48 Received message from Camera: op=State serial=182683
05:08:48 GetSingleValue result=40  Value=cccccccc
05:08:48 SkyScan query
05:08:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:08:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:08:48 Parameters OK
05:08:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:08:48 Set A/D data flow result=40
05:08:48 Set A/D channel type result=40
05:08:48 Set A/D encoding result=40
05:08:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:08:48 Set channel filter=0.000000e+000  result=40
05:08:48 Config A/D  Result=40
05:08:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:08:48 Get A/D filter: -9.255963e+061  result=40
05:08:48 Get A/D value=-858993460  result=40
05:08:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:08:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:08:48 Parameters OK
05:08:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:08:48 Set A/D data flow result=40
05:08:48 Set A/D channel type result=40
05:08:48 Set A/D encoding result=40
05:08:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:08:48 Set channel filter=0.000000e+000  result=40
05:08:48 Config A/D  Result=40
05:08:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:08:48 Get A/D filter: -9.255963e+061  result=40
05:08:48 Get A/D value=-858993460  result=40
05:08:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:08:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:08:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:08:48 Aux=
05:08:48 Message to Camera, serial 182683 queued
05:08:57 Received message from Master: op=Shutter serial=182693
05:08:57 Shutter LASER close
05:08:57 Received message from Master: op=PointingHead serial=182697
05:08:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:08:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:08:57 Point started: ret=0
05:08:57 point_skyscan result=0
05:08:58 Check angles
05:08:58 SkyScan query
05:08:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
05:08:59 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
05:08:59 Check angles
05:08:59 SkyScan query
05:09:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
05:09:00 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
05:09:00 Check angles
05:09:00 SkyScan query
05:09:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.28<-18752  Statuses=0008 0009
05:09:00 Msec=1500  True Az=112.995  Ze=-101.28  Az status=0008  Ze status=0009
05:09:00 Check angles
05:09:00 SkyScan query
05:09:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
05:09:01 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
05:09:01 Check angles
05:09:01 SkyScan query
05:09:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
05:09:02 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
05:09:02 Check angles
05:09:02 SkyScan query
05:09:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
05:09:03 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
05:09:03 Check angles
05:09:03 SkyScan query
05:09:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.46<-13164  Statuses=0008 0009
05:09:03 Msec=4500  True Az=112.995  Ze=-17.46  Az status=0008  Ze status=0009
05:09:03 Check angles
05:09:03 SkyScan query
05:09:04 SkyScan query done: ret=0  az=112.995<-7533  ze=3.51<-11766  Statuses=0008 0009
05:09:04 Msec=5250  True Az=112.995  Ze=3.51  Az status=0008  Ze status=0009
05:09:04 Check angles
05:09:04 SkyScan query
05:09:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:09:05 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:09:05 Message to Master queued w/err=0: serial=182697 error=0
05:09:10 Received message from Master: op=Filter serial=182698
05:09:10 Color wheel filter change from 0 to 0
05:09:10 FLIGetFilterPos err=0  currentPosition=0
05:09:10 FLIGetStepsRemaining err=0  RemainingSteps=0
05:09:10 Filter is already there-color wheel unchanged
05:09:10 Received message from Master: op=Shutter serial=182699
05:09:10 Shutter LASER close
05:09:10 Received message from Camera: op=State serial=182701
05:09:10 GetSingleValue result=40  Value=cccccccc
05:09:10 SkyScan query
05:09:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:09:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:11 Parameters OK
05:09:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:11 Set A/D data flow result=40
05:09:11 Set A/D channel type result=40
05:09:11 Set A/D encoding result=40
05:09:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:11 Set channel filter=0.000000e+000  result=40
05:09:11 Config A/D  Result=40
05:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:11 Get A/D filter: -9.255963e+061  result=40
05:09:11 Get A/D value=-858993460  result=40
05:09:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:11 Parameters OK
05:09:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:11 Set A/D data flow result=40
05:09:11 Set A/D channel type result=40
05:09:11 Set A/D encoding result=40
05:09:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:11 Set channel filter=0.000000e+000  result=40
05:09:11 Config A/D  Result=40
05:09:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:11 Get A/D filter: -9.255963e+061  result=40
05:09:11 Get A/D value=-858993460  result=40
05:09:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:09:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:09:11 Aux=
05:09:11 Message to Camera, serial 182701 queued
05:09:48 Received message from Master: op=PointingHead serial=182714
05:09:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:09:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:09:48 Point started: ret=0
05:09:48 point_skyscan result=0
05:09:49 Check angles
05:09:49 SkyScan query
05:09:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:09:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:09:49 Message to Master queued w/err=0: serial=182714 error=0
05:09:54 Received message from Master: op=Filter serial=182715
05:09:54 Color wheel filter change from 0 to 0
05:09:54 FLIGetFilterPos err=0  currentPosition=0
05:09:54 FLIGetStepsRemaining err=0  RemainingSteps=0
05:09:54 Filter is already there-color wheel unchanged
05:09:54 Received message from Master: op=Shutter serial=182716
05:09:54 Shutter LASER close
05:09:54 Received message from Camera: op=State serial=182718
05:09:54 GetSingleValue result=40  Value=cccccccc
05:09:54 SkyScan query
05:09:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:09:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:55 Parameters OK
05:09:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:55 Set A/D data flow result=40
05:09:55 Set A/D channel type result=40
05:09:55 Set A/D encoding result=40
05:09:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:55 Set channel filter=0.000000e+000  result=40
05:09:55 Config A/D  Result=40
05:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:55 Get A/D filter: -9.255963e+061  result=40
05:09:55 Get A/D value=-858993460  result=40
05:09:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:09:55 Parameters OK
05:09:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:09:55 Set A/D data flow result=40
05:09:55 Set A/D channel type result=40
05:09:55 Set A/D encoding result=40
05:09:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:09:55 Set channel filter=0.000000e+000  result=40
05:09:55 Config A/D  Result=40
05:09:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:09:55 Get A/D filter: -9.255963e+061  result=40
05:09:55 Get A/D value=-858993460  result=40
05:09:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:09:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:09:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:09:55 Aux=
05:09:55 Message to Camera, serial 182718 queued
05:10:31 Received message from Master: op=PointingHead serial=182730
05:10:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:10:31 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:10:31 Point started: ret=0
05:10:31 point_skyscan result=0
05:10:32 Check angles
05:10:32 SkyScan query
05:10:33 SkyScan query done: ret=0  az=136.005<-9067  ze=-6.51<-12434  Statuses=0009 0008
05:10:33 Msec=0  True Az=136.005  Ze=-6.51  Az status=0009  Ze status=0008
05:10:33 Check angles
05:10:33 SkyScan query
05:10:33 SkyScan query done: ret=0  az=153.495<-10233  ze=-6.495<-12433  Statuses=0009 0008
05:10:33 Msec=750  True Az=153.495  Ze=-6.495  Az status=0009  Ze status=0008
05:10:34 Check angles
05:10:34 SkyScan query
05:10:34 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.495<-12433  Statuses=0009 0008
05:10:34 Msec=1500  True Az=171.315  Ze=-6.495  Az status=0009  Ze status=0008
05:10:34 Check angles
05:10:34 SkyScan query
05:10:35 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:10:35 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:10:35 Message to Master queued w/err=0: serial=182730 error=0
05:10:40 Received message from Master: op=Filter serial=182731
05:10:40 Color wheel filter change from 0 to 0
05:10:40 FLIGetFilterPos err=0  currentPosition=0
05:10:40 FLIGetStepsRemaining err=0  RemainingSteps=0
05:10:40 Filter is already there-color wheel unchanged
05:10:40 Received message from Master: op=Shutter serial=182732
05:10:40 Shutter LASER close
05:10:40 Received message from Camera: op=State serial=182734
05:10:40 GetSingleValue result=40  Value=cccccccc
05:10:40 SkyScan query
05:10:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:10:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:10:41 Parameters OK
05:10:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:10:41 Set A/D data flow result=40
05:10:41 Set A/D channel type result=40
05:10:41 Set A/D encoding result=40
05:10:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:10:41 Set channel filter=0.000000e+000  result=40
05:10:41 Config A/D  Result=40
05:10:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:10:41 Get A/D filter: -9.255963e+061  result=40
05:10:41 Get A/D value=-858993460  result=40
05:10:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:10:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:10:41 Parameters OK
05:10:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:10:41 Set A/D data flow result=40
05:10:41 Set A/D channel type result=40
05:10:41 Set A/D encoding result=40
05:10:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:10:41 Set channel filter=0.000000e+000  result=40
05:10:41 Config A/D  Result=40
05:10:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:10:41 Get A/D filter: -9.255963e+061  result=40
05:10:41 Get A/D value=-858993460  result=40
05:10:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:10:41 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:10:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:10:41 Aux=
05:10:41 Message to Camera, serial 182734 queued
05:11:17 Received message from Master: op=PointingHead serial=182747
05:11:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:11:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:11:18 Point started: ret=0
05:11:18 point_skyscan result=0
05:11:19 Check angles
05:11:19 SkyScan query
05:11:19 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
05:11:19 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
05:11:19 Check angles
05:11:19 SkyScan query
05:11:20 SkyScan query done: ret=0  az=135.36<-9024  ze=6.495<-11567  Statuses=0009 0008
05:11:20 Msec=750  True Az=135.36  Ze=6.495  Az status=0009  Ze status=0008
05:11:20 Check angles
05:11:20 SkyScan query
05:11:21 SkyScan query done: ret=0  az=117.885<-7859  ze=6.495<-11567  Statuses=0009 0008
05:11:21 Msec=1500  True Az=117.885  Ze=6.495  Az status=0009  Ze status=0008
05:11:21 Check angles
05:11:21 SkyScan query
05:11:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:11:21 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:11:21 Message to Master queued w/err=0: serial=182747 error=0
05:11:26 Received message from Master: op=Filter serial=182748
05:11:26 Color wheel filter change from 0 to 0
05:11:26 FLIGetFilterPos err=0  currentPosition=0
05:11:26 FLIGetStepsRemaining err=0  RemainingSteps=0
05:11:26 Filter is already there-color wheel unchanged
05:11:27 Received message from Master: op=Shutter serial=182749
05:11:27 Shutter LASER close
05:11:27 Received message from Camera: op=State serial=182751
05:11:27 GetSingleValue result=40  Value=cccccccc
05:11:27 SkyScan query
05:11:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:11:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:11:27 Parameters OK
05:11:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:11:27 Set A/D data flow result=40
05:11:27 Set A/D channel type result=40
05:11:27 Set A/D encoding result=40
05:11:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:11:27 Set channel filter=0.000000e+000  result=40
05:11:27 Config A/D  Result=40
05:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:11:27 Get A/D filter: -9.255963e+061  result=40
05:11:27 Get A/D value=-858993460  result=40
05:11:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:11:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:11:27 Parameters OK
05:11:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:11:27 Set A/D data flow result=40
05:11:27 Set A/D channel type result=40
05:11:27 Set A/D encoding result=40
05:11:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:11:27 Set channel filter=0.000000e+000  result=40
05:11:27 Config A/D  Result=40
05:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:11:27 Get A/D filter: -9.255963e+061  result=40
05:11:27 Get A/D value=-858993460  result=40
05:11:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:11:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:11:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:11:27 Aux=
05:11:27 Message to Camera, serial 182751 queued
05:12:04 Received message from Master: op=PointingHead serial=182764
05:12:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:12:04 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:12:04 Point started: ret=0
05:12:04 point_skyscan result=0
05:12:05 Check angles
05:12:05 SkyScan query
05:12:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
05:12:06 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
05:12:06 Check angles
05:12:06 SkyScan query
05:12:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
05:12:07 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
05:12:07 Check angles
05:12:07 SkyScan query
05:12:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.445<-16363  Statuses=0008 0009
05:12:07 Msec=1500  True Az=112.995  Ze=-65.445  Az status=0008  Ze status=0009
05:12:07 Check angles
05:12:07 SkyScan query
05:12:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.4<-17760  Statuses=0008 0009
05:12:08 Msec=2250  True Az=112.995  Ze=-86.4  Az status=0008  Ze status=0009
05:12:08 Check angles
05:12:08 SkyScan query
05:12:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.775<-19185  Statuses=0008 0009
05:12:09 Msec=3000  True Az=112.995  Ze=-107.775  Az status=0008  Ze status=0009
05:12:09 Check angles
05:12:09 SkyScan query
05:12:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.715<-20581  Statuses=0008 0009
05:12:10 Msec=3750  True Az=112.995  Ze=-128.715  Az status=0008  Ze status=0009
05:12:10 Check angles
05:12:10 SkyScan query
05:12:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.67<-21978  Statuses=0008 0009
05:12:10 Msec=4500  True Az=112.995  Ze=-149.67  Az status=0008  Ze status=0009
05:12:10 Check angles
05:12:10 SkyScan query
05:12:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.595<-23373  Statuses=0008 0009
05:12:11 Msec=5250  True Az=112.995  Ze=-170.595  Az status=0008  Ze status=0009
05:12:11 Check angles
05:12:11 SkyScan query
05:12:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:12:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:12:12 Message to Master queued w/err=0: serial=182764 error=0
05:12:17 Received message from Master: op=Filter serial=182765
05:12:17 Color wheel filter change from 0 to 0
05:12:17 FLIGetFilterPos err=0  currentPosition=0
05:12:17 FLIGetStepsRemaining err=0  RemainingSteps=0
05:12:17 Filter is already there-color wheel unchanged
05:12:17 Received message from Master: op=Shutter serial=182766
05:12:17 Shutter LASER open
05:12:17 Received message from Camera: op=State serial=182768
05:12:17 GetSingleValue result=40  Value=cccccccc
05:12:17 SkyScan query
05:12:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:12:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:12:18 Parameters OK
05:12:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:12:18 Set A/D data flow result=40
05:12:18 Set A/D channel type result=40
05:12:18 Set A/D encoding result=40
05:12:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:12:18 Set channel filter=0.000000e+000  result=40
05:12:18 Config A/D  Result=40
05:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:12:18 Get A/D filter: -9.255963e+061  result=40
05:12:18 Get A/D value=-858993460  result=40
05:12:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:12:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:12:18 Parameters OK
05:12:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:12:18 Set A/D data flow result=40
05:12:18 Set A/D channel type result=40
05:12:18 Set A/D encoding result=40
05:12:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:12:18 Set channel filter=0.000000e+000  result=40
05:12:18 Config A/D  Result=40
05:12:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:12:18 Get A/D filter: -9.255963e+061  result=40
05:12:18 Get A/D value=-858993460  result=40
05:12:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:12:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:12:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:12:18 Aux=
05:12:18 Message to Camera, serial 182768 queued
05:12:26 Received message from Master: op=Shutter serial=182778
05:12:26 Shutter LASER close
05:12:27 Received message from Master: op=PointingHead serial=182782
05:12:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:12:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:12:27 Point started: ret=0
05:12:27 point_skyscan result=0
05:12:28 Check angles
05:12:28 SkyScan query
05:12:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
05:12:28 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
05:12:28 Check angles
05:12:28 SkyScan query
05:12:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.44<-20096  Statuses=0008 0009
05:12:29 Msec=750  True Az=112.995  Ze=-121.44  Az status=0008  Ze status=0009
05:12:29 Check angles
05:12:29 SkyScan query
05:12:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.47<-18698  Statuses=0008 0009
05:12:30 Msec=1500  True Az=112.995  Ze=-100.47  Az status=0008  Ze status=0009
05:12:30 Check angles
05:12:30 SkyScan query
05:12:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.545<-17303  Statuses=0008 0009
05:12:31 Msec=2250  True Az=112.995  Ze=-79.545  Az status=0008  Ze status=0009
05:12:31 Check angles
05:12:31 SkyScan query
05:12:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.125<-15875  Statuses=0008 0009
05:12:31 Msec=3000  True Az=112.995  Ze=-58.125  Az status=0008  Ze status=0009
05:12:31 Check angles
05:12:31 SkyScan query
05:12:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.2<-14480  Statuses=0008 0009
05:12:32 Msec=3750  True Az=112.995  Ze=-37.2  Az status=0008  Ze status=0009
05:12:32 Check angles
05:12:32 SkyScan query
05:12:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.215<-13081  Statuses=0008 0009
05:12:33 Msec=4500  True Az=112.995  Ze=-16.215  Az status=0008  Ze status=0009
05:12:33 Check angles
05:12:33 SkyScan query
05:12:34 SkyScan query done: ret=0  az=112.995<-7533  ze=4.59<-11694  Statuses=0008 0009
05:12:34 Msec=5250  True Az=112.995  Ze=4.59  Az status=0008  Ze status=0009
05:12:34 Check angles
05:12:34 SkyScan query
05:12:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:12:34 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:12:34 Message to Master queued w/err=0: serial=182782 error=0
05:12:39 Received message from Master: op=Filter serial=182783
05:12:39 Color wheel filter change from 0 to 0
05:12:39 FLIGetFilterPos err=0  currentPosition=0
05:12:39 FLIGetStepsRemaining err=0  RemainingSteps=0
05:12:39 Filter is already there-color wheel unchanged
05:12:39 Received message from Master: op=Shutter serial=182784
05:12:39 Shutter LASER close
05:12:40 Received message from Camera: op=State serial=182786
05:12:40 GetSingleValue result=40  Value=cccccccc
05:12:40 SkyScan query
05:12:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:12:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:12:40 Parameters OK
05:12:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:12:40 Set A/D data flow result=40
05:12:40 Set A/D channel type result=40
05:12:40 Set A/D encoding result=40
05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:12:40 Set channel filter=0.000000e+000  result=40
05:12:40 Config A/D  Result=40
05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:12:40 Get A/D filter: -9.255963e+061  result=40
05:12:40 Get A/D value=-858993460  result=40
05:12:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:12:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:12:40 Parameters OK
05:12:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:12:40 Set A/D data flow result=40
05:12:40 Set A/D channel type result=40
05:12:40 Set A/D encoding result=40
05:12:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:12:40 Set channel filter=0.000000e+000  result=40
05:12:40 Config A/D  Result=40
05:12:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:12:40 Get A/D filter: -9.255963e+061  result=40
05:12:40 Get A/D value=-858993460  result=40
05:12:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:12:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:12:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:12:40 Aux=
05:12:40 Message to Camera, serial 182786 queued
05:13:17 Received message from Master: op=PointingHead serial=182799
05:13:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:13:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:13:17 Point started: ret=0
05:13:17 point_skyscan result=0
05:13:18 Check angles
05:13:18 SkyScan query
05:13:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:13:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:13:19 Message to Master queued w/err=0: serial=182799 error=0
05:13:24 Received message from Master: op=Filter serial=182800
05:13:24 Color wheel filter change from 0 to 0
05:13:24 FLIGetFilterPos err=0  currentPosition=0
05:13:24 FLIGetStepsRemaining err=0  RemainingSteps=0
05:13:24 Filter is already there-color wheel unchanged
05:13:24 Received message from Master: op=Shutter serial=182801
05:13:24 Shutter LASER close
05:13:24 Received message from Camera: op=State serial=182803
05:13:24 GetSingleValue result=40  Value=cccccccc
05:13:24 SkyScan query
05:13:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:13:25 Parameters OK
05:13:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:13:25 Set A/D data flow result=40
05:13:25 Set A/D channel type result=40
05:13:25 Set A/D encoding result=40
05:13:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:13:25 Set channel filter=0.000000e+000  result=40
05:13:25 Config A/D  Result=40
05:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:13:25 Get A/D filter: -9.255963e+061  result=40
05:13:25 Get A/D value=-858993460  result=40
05:13:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:13:25 Parameters OK
05:13:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:13:25 Set A/D data flow result=40
05:13:25 Set A/D channel type result=40
05:13:25 Set A/D encoding result=40
05:13:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:13:25 Set channel filter=0.000000e+000  result=40
05:13:25 Config A/D  Result=40
05:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:13:25 Get A/D filter: -9.255963e+061  result=40
05:13:25 Get A/D value=-858993460  result=40
05:13:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:13:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:13:25 Aux=
05:13:25 Message to Camera, serial 182803 queued
05:14:01 Received message from Master: op=PointingHead serial=182816
05:14:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:14:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:14:02 Point started: ret=0
05:14:02 point_skyscan result=0
05:14:03 Check angles
05:14:03 SkyScan query
05:14:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:14:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:14:03 Message to Master queued w/err=0: serial=182816 error=0
05:14:08 Received message from Master: op=Filter serial=182817
05:14:08 Color wheel filter change from 0 to 0
05:14:08 FLIGetFilterPos err=0  currentPosition=0
05:14:08 FLIGetStepsRemaining err=0  RemainingSteps=0
05:14:08 Filter is already there-color wheel unchanged
05:14:08 Received message from Master: op=Shutter serial=182818
05:14:08 Shutter LASER close
05:14:08 Received message from Camera: op=State serial=182820
05:14:08 GetSingleValue result=40  Value=cccccccc
05:14:08 SkyScan query
05:14:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:14:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:14:09 Parameters OK
05:14:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:14:09 Set A/D data flow result=40
05:14:09 Set A/D channel type result=40
05:14:09 Set A/D encoding result=40
05:14:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:14:09 Set channel filter=0.000000e+000  result=40
05:14:09 Config A/D  Result=40
05:14:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:14:09 Get A/D filter: -9.255963e+061  result=40
05:14:09 Get A/D value=-858993460  result=40
05:14:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:14:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:14:09 Parameters OK
05:14:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:14:09 Set A/D data flow result=40
05:14:09 Set A/D channel type result=40
05:14:09 Set A/D encoding result=40
05:14:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:14:09 Set channel filter=0.000000e+000  result=40
05:14:09 Config A/D  Result=40
05:14:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:14:09 Get A/D filter: -9.255963e+061  result=40
05:14:09 Get A/D value=-858993460  result=40
05:14:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:14:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:14:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:14:09 Aux=
05:14:09 Message to Camera, serial 182820 queued
[UTC 2019-3-9  05:14:46]
05:14:46 Received message from Master: op=PointingHead serial=182833
05:14:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:14:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:14:46 Point started: ret=0
05:14:46 point_skyscan result=0
05:14:47 Check angles
05:14:47 SkyScan query
05:14:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:14:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:14:47 Message to Master queued w/err=0: serial=182833 error=0
05:14:52 Received message from Master: op=Filter serial=182834
05:14:52 Color wheel filter change from 0 to 0
05:14:52 FLIGetFilterPos err=0  currentPosition=0
05:14:52 FLIGetStepsRemaining err=0  RemainingSteps=0
05:14:52 Filter is already there-color wheel unchanged
05:14:53 Received message from Master: op=Shutter serial=182835
05:14:53 Shutter LASER close
05:14:53 Received message from Camera: op=State serial=182837
05:14:53 GetSingleValue result=40  Value=cccccccc
05:14:53 SkyScan query
05:14:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:14:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:14:53 Parameters OK
05:14:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:14:53 Set A/D data flow result=40
05:14:53 Set A/D channel type result=40
05:14:53 Set A/D encoding result=40
05:14:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:14:53 Set channel filter=0.000000e+000  result=40
05:14:53 Config A/D  Result=40
05:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:14:53 Get A/D filter: -9.255963e+061  result=40
05:14:53 Get A/D value=-858993460  result=40
05:14:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:14:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:14:53 Parameters OK
05:14:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:14:53 Set A/D data flow result=40
05:14:53 Set A/D channel type result=40
05:14:53 Set A/D encoding result=40
05:14:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:14:53 Set channel filter=0.000000e+000  result=40
05:14:53 Config A/D  Result=40
05:14:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:14:53 Get A/D filter: -9.255963e+061  result=40
05:14:53 Get A/D value=-858993460  result=40
05:14:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:14:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:14:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:14:53 Aux=
05:14:53 Message to Camera, serial 182837 queued
05:15:30 Received message from Master: op=PointingHead serial=182850
05:15:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:15:30 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:15:30 Point started: ret=0
05:15:30 point_skyscan result=0
05:15:31 Check angles
05:15:31 SkyScan query
05:15:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.055<-13537  Statuses=0008 0009
05:15:32 Msec=0  True Az=112.995  Ze=-23.055  Az status=0008  Ze status=0009
05:15:32 Check angles
05:15:32 SkyScan query
05:15:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.01<-14934  Statuses=0008 0009
05:15:32 Msec=750  True Az=112.995  Ze=-44.01  Az status=0008  Ze status=0009
05:15:33 Check angles
05:15:33 SkyScan query
05:15:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.415<-16361  Statuses=0008 0009
05:15:33 Msec=1500  True Az=112.995  Ze=-65.415  Az status=0008  Ze status=0009
05:15:33 Check angles
05:15:33 SkyScan query
05:15:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.805<-17787  Statuses=0008 0009
05:15:34 Msec=2250  True Az=112.995  Ze=-86.805  Az status=0008  Ze status=0009
05:15:34 Check angles
05:15:34 SkyScan query
05:15:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.745<-19183  Statuses=0008 0009
05:15:35 Msec=3000  True Az=112.995  Ze=-107.745  Az status=0008  Ze status=0009
05:15:35 Check angles
05:15:35 SkyScan query
05:15:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
05:15:36 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
05:15:36 Check angles
05:15:36 SkyScan query
05:15:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.655<-21977  Statuses=0008 0009
05:15:36 Msec=4500  True Az=112.995  Ze=-149.655  Az status=0008  Ze status=0009
05:15:36 Check angles
05:15:36 SkyScan query
05:15:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.595<-23373  Statuses=0008 0009
05:15:37 Msec=5250  True Az=112.995  Ze=-170.595  Az status=0008  Ze status=0009
05:15:37 Check angles
05:15:37 SkyScan query
05:15:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:15:38 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:15:38 Message to Master queued w/err=0: serial=182850 error=0
05:15:43 Received message from Master: op=Filter serial=182851
05:15:43 Color wheel filter change from 0 to 0
05:15:43 FLIGetFilterPos err=0  currentPosition=0
05:15:43 FLIGetStepsRemaining err=0  RemainingSteps=0
05:15:43 Filter is already there-color wheel unchanged
05:15:43 Received message from Master: op=Shutter serial=182852
05:15:43 Shutter LASER open
05:15:43 Received message from Camera: op=State serial=182854
05:15:43 GetSingleValue result=40  Value=cccccccc
05:15:43 SkyScan query
05:15:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:15:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:15:44 Parameters OK
05:15:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:15:44 Set A/D data flow result=40
05:15:44 Set A/D channel type result=40
05:15:44 Set A/D encoding result=40
05:15:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:15:44 Set channel filter=0.000000e+000  result=40
05:15:44 Config A/D  Result=40
05:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:15:44 Get A/D filter: -9.255963e+061  result=40
05:15:44 Get A/D value=-858993460  result=40
05:15:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:15:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:15:44 Parameters OK
05:15:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:15:44 Set A/D data flow result=40
05:15:44 Set A/D channel type result=40
05:15:44 Set A/D encoding result=40
05:15:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:15:44 Set channel filter=0.000000e+000  result=40
05:15:44 Config A/D  Result=40
05:15:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:15:44 Get A/D filter: -9.255963e+061  result=40
05:15:44 Get A/D value=-858993460  result=40
05:15:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:15:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:15:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:15:44 Aux=
05:15:44 Message to Camera, serial 182854 queued
05:15:52 Received message from Master: op=Shutter serial=182864
05:15:52 Shutter LASER close
05:15:53 Received message from Master: op=PointingHead serial=182868
05:15:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:15:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:15:53 Point started: ret=0
05:15:53 point_skyscan result=0
05:15:54 Check angles
05:15:54 SkyScan query
05:15:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.145<-21543  Statuses=0008 0009
05:15:54 Msec=0  True Az=112.995  Ze=-143.145  Az status=0008  Ze status=0009
05:15:55 Check angles
05:15:55 SkyScan query
05:15:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.19<-20146  Statuses=0008 0009
05:15:55 Msec=750  True Az=112.995  Ze=-122.19  Az status=0008  Ze status=0009
05:15:55 Check angles
05:15:55 SkyScan query
05:15:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.815<-18721  Statuses=0008 0009
05:15:56 Msec=1500  True Az=112.995  Ze=-100.815  Az status=0008  Ze status=0009
05:15:56 Check angles
05:15:56 SkyScan query
05:15:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.875<-17325  Statuses=0008 0009
05:15:57 Msec=2250  True Az=112.995  Ze=-79.875  Az status=0008  Ze status=0009
05:15:57 Check angles
05:15:57 SkyScan query
05:15:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.935<-15929  Statuses=0008 0009
05:15:57 Msec=3000  True Az=112.995  Ze=-58.935  Az status=0008  Ze status=0009
05:15:58 Check angles
05:15:58 SkyScan query
05:15:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.935<-14529  Statuses=0008 0009
05:15:58 Msec=3750  True Az=112.995  Ze=-37.935  Az status=0008  Ze status=0009
05:15:58 Check angles
05:15:58 SkyScan query
05:15:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.53<-13102  Statuses=0008 0009
05:15:59 Msec=4500  True Az=112.995  Ze=-16.53  Az status=0008  Ze status=0009
05:15:59 Check angles
05:15:59 SkyScan query
05:16:00 SkyScan query done: ret=0  az=112.995<-7533  ze=4.35<-11710  Statuses=0008 0009
05:16:00 Msec=5250  True Az=112.995  Ze=4.35  Az status=0008  Ze status=0009
05:16:00 Check angles
05:16:00 SkyScan query
05:16:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:16:00 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:16:00 Message to Master queued w/err=0: serial=182868 error=0
05:16:05 Received message from Master: op=Filter serial=182869
05:16:05 Color wheel filter change from 0 to 0
05:16:05 FLIGetFilterPos err=0  currentPosition=0
05:16:05 FLIGetStepsRemaining err=0  RemainingSteps=0
05:16:05 Filter is already there-color wheel unchanged
05:16:06 Received message from Master: op=Shutter serial=182870
05:16:06 Shutter LASER close
05:16:06 Received message from Camera: op=State serial=182872
05:16:06 GetSingleValue result=40  Value=cccccccc
05:16:06 SkyScan query
05:16:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:16:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:06 Parameters OK
05:16:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:06 Set A/D data flow result=40
05:16:06 Set A/D channel type result=40
05:16:06 Set A/D encoding result=40
05:16:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:06 Set channel filter=0.000000e+000  result=40
05:16:06 Config A/D  Result=40
05:16:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:06 Get A/D filter: -9.255963e+061  result=40
05:16:06 Get A/D value=-858993460  result=40
05:16:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:06 Parameters OK
05:16:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:06 Set A/D data flow result=40
05:16:06 Set A/D channel type result=40
05:16:06 Set A/D encoding result=40
05:16:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:06 Set channel filter=0.000000e+000  result=40
05:16:06 Config A/D  Result=40
05:16:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:06 Get A/D filter: -9.255963e+061  result=40
05:16:06 Get A/D value=-858993460  result=40
05:16:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:16:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:16:06 Aux=
05:16:06 Message to Camera, serial 182872 queued
05:16:43 Received message from Master: op=PointingHead serial=182885
05:16:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:16:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:16:44 Point started: ret=0
05:16:44 point_skyscan result=0
05:16:44 Check angles
05:16:44 SkyScan query
05:16:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:16:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:16:45 Message to Master queued w/err=0: serial=182885 error=0
05:16:50 Received message from Master: op=Filter serial=182886
05:16:50 Color wheel filter change from 0 to 0
05:16:50 FLIGetFilterPos err=0  currentPosition=0
05:16:50 FLIGetStepsRemaining err=0  RemainingSteps=0
05:16:50 Filter is already there-color wheel unchanged
05:16:50 Received message from Master: op=Shutter serial=182887
05:16:50 Shutter LASER close
05:16:50 Received message from Camera: op=State serial=182889
05:16:50 GetSingleValue result=40  Value=cccccccc
05:16:50 SkyScan query
05:16:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:16:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:51 Parameters OK
05:16:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:51 Set A/D data flow result=40
05:16:51 Set A/D channel type result=40
05:16:51 Set A/D encoding result=40
05:16:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:51 Set channel filter=0.000000e+000  result=40
05:16:51 Config A/D  Result=40
05:16:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:51 Get A/D filter: -9.255963e+061  result=40
05:16:51 Get A/D value=-858993460  result=40
05:16:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:16:51 Parameters OK
05:16:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:16:51 Set A/D data flow result=40
05:16:51 Set A/D channel type result=40
05:16:51 Set A/D encoding result=40
05:16:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:16:51 Set channel filter=0.000000e+000  result=40
05:16:51 Config A/D  Result=40
05:16:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:16:51 Get A/D filter: -9.255963e+061  result=40
05:16:51 Get A/D value=-858993460  result=40
05:16:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:16:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:16:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:16:51 Aux=
05:16:51 Message to Camera, serial 182889 queued
05:17:28 Received message from Master: op=PointingHead serial=182902
05:17:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:17:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:17:28 Point started: ret=0
05:17:28 point_skyscan result=0
05:17:29 Check angles
05:17:29 SkyScan query
05:17:29 SkyScan query done: ret=0  az=136.2<-9080  ze=-6.51<-12434  Statuses=0009 0008
05:17:29 Msec=0  True Az=136.2  Ze=-6.51  Az status=0009  Ze status=0008
05:17:29 Check angles
05:17:29 SkyScan query
05:17:30 SkyScan query done: ret=0  az=154.125<-10275  ze=-6.495<-12433  Statuses=0009 0008
05:17:30 Msec=750  True Az=154.125  Ze=-6.495  Az status=0009  Ze status=0008
05:17:30 Check angles
05:17:30 SkyScan query
05:17:31 SkyScan query done: ret=0  az=171.6<-11440  ze=-6.495<-12433  Statuses=0009 0008
05:17:31 Msec=1500  True Az=171.6  Ze=-6.495  Az status=0009  Ze status=0008
05:17:31 Check angles
05:17:31 SkyScan query
05:17:31 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:17:31 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:17:31 Message to Master queued w/err=0: serial=182902 error=0
05:17:36 Received message from Master: op=Filter serial=182903
05:17:36 Color wheel filter change from 0 to 0
05:17:36 FLIGetFilterPos err=0  currentPosition=0
05:17:36 FLIGetStepsRemaining err=0  RemainingSteps=0
05:17:36 Filter is already there-color wheel unchanged
05:17:37 Received message from Master: op=Shutter serial=182904
05:17:37 Shutter LASER close
05:17:37 Received message from Camera: op=State serial=182906
05:17:37 GetSingleValue result=40  Value=cccccccc
05:17:37 SkyScan query
05:17:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:17:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:17:37 Parameters OK
05:17:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:17:37 Set A/D data flow result=40
05:17:37 Set A/D channel type result=40
05:17:37 Set A/D encoding result=40
05:17:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:17:37 Set channel filter=0.000000e+000  result=40
05:17:37 Config A/D  Result=40
05:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:17:37 Get A/D filter: -9.255963e+061  result=40
05:17:37 Get A/D value=-858993460  result=40
05:17:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:17:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:17:37 Parameters OK
05:17:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:17:37 Set A/D data flow result=40
05:17:37 Set A/D channel type result=40
05:17:37 Set A/D encoding result=40
05:17:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:17:37 Set channel filter=0.000000e+000  result=40
05:17:37 Config A/D  Result=40
05:17:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:17:37 Get A/D filter: -9.255963e+061  result=40
05:17:37 Get A/D value=-858993460  result=40
05:17:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:17:37 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:17:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:17:37 Aux=
05:17:37 Message to Camera, serial 182906 queued
05:18:14 Received message from Master: op=PointingHead serial=182919
05:18:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:18:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:18:14 Point started: ret=0
05:18:14 point_skyscan result=0
05:18:15 Check angles
05:18:15 SkyScan query
05:18:16 SkyScan query done: ret=0  az=152.82<-10188  ze=6.51<-11566  Statuses=0009 0008
05:18:16 Msec=0  True Az=152.82  Ze=6.51  Az status=0009  Ze status=0008
05:18:16 Check angles
05:18:16 SkyScan query
05:18:17 SkyScan query done: ret=0  az=135.015<-9001  ze=6.495<-11567  Statuses=0009 0008
05:18:17 Msec=750  True Az=135.015  Ze=6.495  Az status=0009  Ze status=0008
05:18:17 Check angles
05:18:17 SkyScan query
05:18:17 SkyScan query done: ret=0  az=117.6<-7840  ze=6.495<-11567  Statuses=0009 0008
05:18:17 Msec=1500  True Az=117.6  Ze=6.495  Az status=0009  Ze status=0008
05:18:17 Check angles
05:18:17 SkyScan query
05:18:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:18:18 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:18:18 Message to Master queued w/err=0: serial=182919 error=0
05:18:23 Received message from Master: op=Filter serial=182920
05:18:23 Color wheel filter change from 0 to 0
05:18:23 FLIGetFilterPos err=0  currentPosition=0
05:18:23 FLIGetStepsRemaining err=0  RemainingSteps=0
05:18:23 Filter is already there-color wheel unchanged
05:18:23 Received message from Master: op=Shutter serial=182921
05:18:23 Shutter LASER close
05:18:23 Received message from Camera: op=State serial=182923
05:18:23 GetSingleValue result=40  Value=cccccccc
05:18:23 SkyScan query
05:18:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:18:24 Parameters OK
05:18:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:18:24 Set A/D data flow result=40
05:18:24 Set A/D channel type result=40
05:18:24 Set A/D encoding result=40
05:18:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:18:24 Set channel filter=0.000000e+000  result=40
05:18:24 Config A/D  Result=40
05:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:18:24 Get A/D filter: -9.255963e+061  result=40
05:18:24 Get A/D value=-858993460  result=40
05:18:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:18:24 Parameters OK
05:18:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:18:24 Set A/D data flow result=40
05:18:24 Set A/D channel type result=40
05:18:24 Set A/D encoding result=40
05:18:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:18:24 Set channel filter=0.000000e+000  result=40
05:18:24 Config A/D  Result=40
05:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:18:24 Get A/D filter: -9.255963e+061  result=40
05:18:24 Get A/D value=-858993460  result=40
05:18:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:18:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:18:24 Aux=
05:18:24 Message to Camera, serial 182923 queued
05:19:01 Received message from Master: op=PointingHead serial=182936
05:19:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:19:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:19:01 Point started: ret=0
05:19:01 point_skyscan result=0
05:19:02 Check angles
05:19:02 SkyScan query
05:19:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
05:19:02 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
05:19:03 Check angles
05:19:03 SkyScan query
05:19:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.475<-14965  Statuses=0008 0009
05:19:03 Msec=750  True Az=112.995  Ze=-44.475  Az status=0008  Ze status=0009
05:19:03 Check angles
05:19:03 SkyScan query
05:19:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.835<-16389  Statuses=0008 0009
05:19:04 Msec=1500  True Az=112.995  Ze=-65.835  Az status=0008  Ze status=0009
05:19:04 Check angles
05:19:04 SkyScan query
05:19:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.775<-17785  Statuses=0008 0009
05:19:05 Msec=2250  True Az=112.995  Ze=-86.775  Az status=0008  Ze status=0009
05:19:05 Check angles
05:19:05 SkyScan query
05:19:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.745<-19183  Statuses=0008 0009
05:19:05 Msec=3000  True Az=112.995  Ze=-107.745  Az status=0008  Ze status=0009
05:19:06 Check angles
05:19:06 SkyScan query
05:19:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
05:19:06 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
05:19:06 Check angles
05:19:06 SkyScan query
05:19:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.655<-21977  Statuses=0008 0009
05:19:07 Msec=4500  True Az=112.995  Ze=-149.655  Az status=0008  Ze status=0009
05:19:07 Check angles
05:19:07 SkyScan query
05:19:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.58<-23372  Statuses=0008 0009
05:19:08 Msec=5250  True Az=112.995  Ze=-170.58  Az status=0008  Ze status=0009
05:19:08 Check angles
05:19:08 SkyScan query
05:19:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:19:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:19:08 Message to Master queued w/err=0: serial=182936 error=0
05:19:13 Received message from Master: op=Filter serial=182937
05:19:13 Color wheel filter change from 0 to 0
05:19:13 FLIGetFilterPos err=0  currentPosition=0
05:19:13 FLIGetStepsRemaining err=0  RemainingSteps=0
05:19:13 Filter is already there-color wheel unchanged
05:19:14 Received message from Master: op=Shutter serial=182938
05:19:14 Shutter LASER open
05:19:14 Received message from Camera: op=State serial=182940
05:19:14 GetSingleValue result=40  Value=cccccccc
05:19:14 SkyScan query
05:19:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:19:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:19:14 Parameters OK
05:19:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:19:14 Set A/D data flow result=40
05:19:14 Set A/D channel type result=40
05:19:14 Set A/D encoding result=40
05:19:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:19:14 Set channel filter=0.000000e+000  result=40
05:19:14 Config A/D  Result=40
05:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:19:14 Get A/D filter: -9.255963e+061  result=40
05:19:14 Get A/D value=-858993460  result=40
05:19:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:19:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:19:14 Parameters OK
05:19:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:19:14 Set A/D data flow result=40
05:19:14 Set A/D channel type result=40
05:19:14 Set A/D encoding result=40
05:19:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:19:14 Set channel filter=0.000000e+000  result=40
05:19:14 Config A/D  Result=40
05:19:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:19:14 Get A/D filter: -9.255963e+061  result=40
05:19:14 Get A/D value=-858993460  result=40
05:19:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:19:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:19:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:19:14 Aux=
05:19:14 Message to Camera, serial 182940 queued
05:19:23 Received message from Master: op=Shutter serial=182950
05:19:23 Shutter LASER close
05:19:23 Received message from Master: op=PointingHead serial=182954
05:19:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:19:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:19:23 Point started: ret=0
05:19:23 point_skyscan result=0
05:19:24 Check angles
05:19:24 SkyScan query
05:19:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
05:19:25 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
05:19:25 Check angles
05:19:25 SkyScan query
05:19:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
05:19:26 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
05:19:26 Check angles
05:19:26 SkyScan query
05:19:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.565<-18771  Statuses=0008 0009
05:19:26 Msec=1500  True Az=112.995  Ze=-101.565  Az status=0008  Ze status=0009
05:19:26 Check angles
05:19:26 SkyScan query
05:19:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.58<-17372  Statuses=0008 0009
05:19:27 Msec=2250  True Az=112.995  Ze=-80.58  Az status=0008  Ze status=0009
05:19:27 Check angles
05:19:27 SkyScan query
05:19:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.655<-15977  Statuses=0008 0009
05:19:28 Msec=3000  True Az=112.995  Ze=-59.655  Az status=0008  Ze status=0009
05:19:28 Check angles
05:19:28 SkyScan query
05:19:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.685<-14579  Statuses=0008 0009
05:19:29 Msec=3750  True Az=112.995  Ze=-38.685  Az status=0008  Ze status=0009
05:19:29 Check angles
05:19:29 SkyScan query
05:19:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.73<-13182  Statuses=0008 0009
05:19:29 Msec=4500  True Az=112.995  Ze=-17.73  Az status=0008  Ze status=0009
05:19:29 Check angles
05:19:29 SkyScan query
05:19:30 SkyScan query done: ret=0  az=112.995<-7533  ze=3.21<-11786  Statuses=0008 0009
05:19:30 Msec=5250  True Az=112.995  Ze=3.21  Az status=0008  Ze status=0009
05:19:30 Check angles
05:19:30 SkyScan query
05:19:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:19:31 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:19:31 Message to Master queued w/err=0: serial=182954 error=0
05:19:36 Received message from Master: op=Filter serial=182955
05:19:36 Color wheel filter change from 0 to 0
05:19:36 FLIGetFilterPos err=0  currentPosition=0
05:19:36 FLIGetStepsRemaining err=0  RemainingSteps=0
05:19:36 Filter is already there-color wheel unchanged
05:19:36 Received message from Master: op=Shutter serial=182956
05:19:36 Shutter LASER close
05:19:36 Received message from Camera: op=State serial=182958
05:19:36 GetSingleValue result=40  Value=cccccccc
05:19:36 SkyScan query
05:19:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:19:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:19:37 Parameters OK
05:19:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:19:37 Set A/D data flow result=40
05:19:37 Set A/D channel type result=40
05:19:37 Set A/D encoding result=40
05:19:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:19:37 Set channel filter=0.000000e+000  result=40
05:19:37 Config A/D  Result=40
05:19:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:19:37 Get A/D filter: -9.255963e+061  result=40
05:19:37 Get A/D value=-858993460  result=40
05:19:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:19:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:19:37 Parameters OK
05:19:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:19:37 Set A/D data flow result=40
05:19:37 Set A/D channel type result=40
05:19:37 Set A/D encoding result=40
05:19:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:19:37 Set channel filter=0.000000e+000  result=40
05:19:37 Config A/D  Result=40
05:19:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:19:37 Get A/D filter: -9.255963e+061  result=40
05:19:37 Get A/D value=-858993460  result=40
05:19:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:19:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:19:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:19:37 Aux=
05:19:37 Message to Camera, serial 182958 queued
05:20:14 Received message from Master: op=PointingHead serial=182971
05:20:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:20:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:20:14 Point started: ret=0
05:20:14 point_skyscan result=0
05:20:15 Check angles
05:20:15 SkyScan query
05:20:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:20:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:20:15 Message to Master queued w/err=0: serial=182971 error=0
05:20:20 Received message from Master: op=Filter serial=182972
05:20:20 Color wheel filter change from 0 to 0
05:20:20 FLIGetFilterPos err=0  currentPosition=0
05:20:20 FLIGetStepsRemaining err=0  RemainingSteps=0
05:20:20 Filter is already there-color wheel unchanged
05:20:20 Received message from Master: op=Shutter serial=182973
05:20:20 Shutter LASER close
05:20:20 Received message from Camera: op=State serial=182975
05:20:20 GetSingleValue result=40  Value=cccccccc
05:20:20 SkyScan query
05:20:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:20:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:20:21 Parameters OK
05:20:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:20:21 Set A/D data flow result=40
05:20:21 Set A/D channel type result=40
05:20:21 Set A/D encoding result=40
05:20:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:20:21 Set channel filter=0.000000e+000  result=40
05:20:21 Config A/D  Result=40
05:20:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:20:21 Get A/D filter: -9.255963e+061  result=40
05:20:21 Get A/D value=-858993460  result=40
05:20:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:20:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:20:21 Parameters OK
05:20:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:20:21 Set A/D data flow result=40
05:20:21 Set A/D channel type result=40
05:20:21 Set A/D encoding result=40
05:20:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:20:21 Set channel filter=0.000000e+000  result=40
05:20:21 Config A/D  Result=40
05:20:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:20:21 Get A/D filter: -9.255963e+061  result=40
05:20:21 Get A/D value=-858993460  result=40
05:20:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:20:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:20:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:20:21 Aux=
05:20:21 Message to Camera, serial 182975 queued
05:20:58 Received message from Master: op=PointingHead serial=182988
05:20:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:20:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:20:58 Point started: ret=0
05:20:58 point_skyscan result=0
05:20:59 Check angles
05:20:59 SkyScan query
05:21:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:21:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:21:00 Message to Master queued w/err=0: serial=182988 error=0
05:21:05 Received message from Master: op=Filter serial=182989
05:21:05 Color wheel filter change from 0 to 0
05:21:05 FLIGetFilterPos err=0  currentPosition=0
05:21:05 FLIGetStepsRemaining err=0  RemainingSteps=0
05:21:05 Filter is already there-color wheel unchanged
05:21:05 Received message from Master: op=Shutter serial=182990
05:21:05 Shutter LASER close
05:21:05 Received message from Camera: op=State serial=182992
05:21:05 GetSingleValue result=40  Value=cccccccc
05:21:05 SkyScan query
05:21:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:21:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:21:05 Parameters OK
05:21:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:21:05 Set A/D data flow result=40
05:21:05 Set A/D channel type result=40
05:21:05 Set A/D encoding result=40
05:21:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:21:05 Set channel filter=0.000000e+000  result=40
05:21:05 Config A/D  Result=40
05:21:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:21:05 Get A/D filter: -9.255963e+061  result=40
05:21:05 Get A/D value=-858993460  result=40
05:21:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:21:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:21:05 Parameters OK
05:21:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:21:05 Set A/D data flow result=40
05:21:05 Set A/D channel type result=40
05:21:05 Set A/D encoding result=40
05:21:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:21:05 Set channel filter=0.000000e+000  result=40
05:21:05 Config A/D  Result=40
05:21:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:21:05 Get A/D filter: -9.255963e+061  result=40
05:21:05 Get A/D value=-858993460  result=40
05:21:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:21:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:21:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:21:05 Aux=
05:21:05 Message to Camera, serial 182992 queued
05:21:42 Received message from Master: op=PointingHead serial=183005
05:21:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:21:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:21:43 Point started: ret=0
05:21:43 point_skyscan result=0
05:21:43 Check angles
05:21:43 SkyScan query
05:21:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:21:44 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:21:44 Message to Master queued w/err=0: serial=183005 error=0
05:21:49 Received message from Master: op=Filter serial=183006
05:21:49 Color wheel filter change from 0 to 0
05:21:49 FLIGetFilterPos err=0  currentPosition=0
05:21:49 FLIGetStepsRemaining err=0  RemainingSteps=0
05:21:49 Filter is already there-color wheel unchanged
05:21:49 Received message from Master: op=Shutter serial=183007
05:21:49 Shutter LASER close
05:21:49 Received message from Camera: op=State serial=183009
05:21:49 GetSingleValue result=40  Value=cccccccc
05:21:49 SkyScan query
05:21:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:21:50 Parameters OK
05:21:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:21:50 Set A/D data flow result=40
05:21:50 Set A/D channel type result=40
05:21:50 Set A/D encoding result=40
05:21:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:21:50 Set channel filter=0.000000e+000  result=40
05:21:50 Config A/D  Result=40
05:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:21:50 Get A/D filter: -9.255963e+061  result=40
05:21:50 Get A/D value=-858993460  result=40
05:21:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:21:50 Parameters OK
05:21:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:21:50 Set A/D data flow result=40
05:21:50 Set A/D channel type result=40
05:21:50 Set A/D encoding result=40
05:21:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:21:50 Set channel filter=0.000000e+000  result=40
05:21:50 Config A/D  Result=40
05:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:21:50 Get A/D filter: -9.255963e+061  result=40
05:21:50 Get A/D value=-858993460  result=40
05:21:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:21:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:21:50 Aux=
05:21:50 Message to Camera, serial 183009 queued
05:22:27 Received message from Master: op=PointingHead serial=183022
05:22:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:22:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:22:27 Point started: ret=0
05:22:27 point_skyscan result=0
05:22:28 Check angles
05:22:28 SkyScan query
05:22:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.64<-13576  Statuses=0008 0009
05:22:28 Msec=0  True Az=112.995  Ze=-23.64  Az status=0008  Ze status=0009
05:22:28 Check angles
05:22:28 SkyScan query
05:22:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
05:22:29 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
05:22:29 Check angles
05:22:29 SkyScan query
05:22:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-66<-16400  Statuses=0008 0009
05:22:30 Msec=1500  True Az=112.995  Ze=-66  Az status=0008  Ze status=0009
05:22:30 Check angles
05:22:30 SkyScan query
05:22:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.94<-17796  Statuses=0008 0009
05:22:30 Msec=2250  True Az=112.995  Ze=-86.94  Az status=0008  Ze status=0009
05:22:31 Check angles
05:22:31 SkyScan query
05:22:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.91<-19194  Statuses=0008 0009
05:22:31 Msec=3000  True Az=112.995  Ze=-107.91  Az status=0008  Ze status=0009
05:22:31 Check angles
05:22:31 SkyScan query
05:22:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.85<-20590  Statuses=0008 0009
05:22:32 Msec=3750  True Az=112.995  Ze=-128.85  Az status=0008  Ze status=0009
05:22:32 Check angles
05:22:32 SkyScan query
05:22:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.255<-22017  Statuses=0008 0009
05:22:33 Msec=4500  True Az=112.995  Ze=-150.255  Az status=0008  Ze status=0009
05:22:33 Check angles
05:22:33 SkyScan query
05:22:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.06<-23404  Statuses=0008 0009
05:22:33 Msec=5250  True Az=112.995  Ze=-171.06  Az status=0008  Ze status=0009
05:22:34 Check angles
05:22:34 SkyScan query
05:22:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:22:34 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:22:34 Message to Master queued w/err=0: serial=183022 error=0
05:22:39 Received message from Master: op=Filter serial=183023
05:22:39 Color wheel filter change from 0 to 0
05:22:39 FLIGetFilterPos err=0  currentPosition=0
05:22:39 FLIGetStepsRemaining err=0  RemainingSteps=0
05:22:39 Filter is already there-color wheel unchanged
05:22:39 Received message from Master: op=Shutter serial=183024
05:22:39 Shutter LASER open
05:22:40 Received message from Camera: op=State serial=183026
05:22:40 GetSingleValue result=40  Value=cccccccc
05:22:40 SkyScan query
05:22:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:22:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:22:40 Parameters OK
05:22:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:22:40 Set A/D data flow result=40
05:22:40 Set A/D channel type result=40
05:22:40 Set A/D encoding result=40
05:22:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:22:40 Set channel filter=0.000000e+000  result=40
05:22:40 Config A/D  Result=40
05:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:22:40 Get A/D filter: -9.255963e+061  result=40
05:22:40 Get A/D value=-858993460  result=40
05:22:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:22:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:22:40 Parameters OK
05:22:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:22:40 Set A/D data flow result=40
05:22:40 Set A/D channel type result=40
05:22:40 Set A/D encoding result=40
05:22:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:22:40 Set channel filter=0.000000e+000  result=40
05:22:40 Config A/D  Result=40
05:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:22:40 Get A/D filter: -9.255963e+061  result=40
05:22:40 Get A/D value=-858993460  result=40
05:22:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:22:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:22:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:22:40 Aux=
05:22:40 Message to Camera, serial 183026 queued
05:22:49 Received message from Master: op=Shutter serial=183036
05:22:49 Shutter LASER close
05:22:49 Received message from Master: op=PointingHead serial=183040
05:22:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:22:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:22:50 Point started: ret=0
05:22:50 point_skyscan result=0
05:22:50 Check angles
05:22:50 SkyScan query
05:22:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
05:22:51 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
05:22:51 Check angles
05:22:51 SkyScan query
05:22:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.265<-20151  Statuses=0008 0009
05:22:52 Msec=750  True Az=112.995  Ze=-122.265  Az status=0008  Ze status=0009
05:22:52 Check angles
05:22:52 SkyScan query
05:22:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.875<-18725  Statuses=0008 0009
05:22:52 Msec=1500  True Az=112.995  Ze=-100.875  Az status=0008  Ze status=0009
05:22:53 Check angles
05:22:53 SkyScan query
05:22:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.935<-17329  Statuses=0008 0009
05:22:53 Msec=2250  True Az=112.995  Ze=-79.935  Az status=0008  Ze status=0009
05:22:53 Check angles
05:22:53 SkyScan query
05:22:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
05:22:54 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
05:22:54 Check angles
05:22:54 SkyScan query
05:22:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.59<-14506  Statuses=0008 0009
05:22:55 Msec=3750  True Az=112.995  Ze=-37.59  Az status=0008  Ze status=0009
05:22:55 Check angles
05:22:55 SkyScan query
05:22:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.605<-13107  Statuses=0008 0009
05:22:55 Msec=4500  True Az=112.995  Ze=-16.605  Az status=0008  Ze status=0009
05:22:56 Check angles
05:22:56 SkyScan query
05:22:56 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
05:22:56 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
05:22:56 Check angles
05:22:56 SkyScan query
05:22:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:22:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:22:57 Message to Master queued w/err=0: serial=183040 error=0
05:23:02 Received message from Master: op=Filter serial=183041
05:23:02 Color wheel filter change from 0 to 0
05:23:02 FLIGetFilterPos err=0  currentPosition=0
05:23:02 FLIGetStepsRemaining err=0  RemainingSteps=0
05:23:02 Filter is already there-color wheel unchanged
05:23:02 Received message from Master: op=Shutter serial=183042
05:23:02 Shutter LASER close
05:23:02 Received message from Camera: op=State serial=183044
05:23:02 GetSingleValue result=40  Value=cccccccc
05:23:02 SkyScan query
05:23:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:23:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:03 Parameters OK
05:23:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:03 Set A/D data flow result=40
05:23:03 Set A/D channel type result=40
05:23:03 Set A/D encoding result=40
05:23:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:03 Set channel filter=0.000000e+000  result=40
05:23:03 Config A/D  Result=40
05:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:03 Get A/D filter: -9.255963e+061  result=40
05:23:03 Get A/D value=-858993460  result=40
05:23:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:03 Parameters OK
05:23:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:03 Set A/D data flow result=40
05:23:03 Set A/D channel type result=40
05:23:03 Set A/D encoding result=40
05:23:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:03 Set channel filter=0.000000e+000  result=40
05:23:03 Config A/D  Result=40
05:23:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:03 Get A/D filter: -9.255963e+061  result=40
05:23:03 Get A/D value=-858993460  result=40
05:23:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:23:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:23:03 Aux=
05:23:03 Message to Camera, serial 183044 queued
05:23:40 Received message from Master: op=PointingHead serial=183057
05:23:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:23:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:23:40 Point started: ret=0
05:23:40 point_skyscan result=0
05:23:41 Check angles
05:23:41 SkyScan query
05:23:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:23:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:23:41 Message to Master queued w/err=0: serial=183057 error=0
05:23:46 Received message from Master: op=Filter serial=183058
05:23:46 Color wheel filter change from 0 to 0
05:23:46 FLIGetFilterPos err=0  currentPosition=0
05:23:46 FLIGetStepsRemaining err=0  RemainingSteps=0
05:23:46 Filter is already there-color wheel unchanged
05:23:47 Received message from Master: op=Shutter serial=183059
05:23:47 Shutter LASER close
05:23:47 Received message from Camera: op=State serial=183061
05:23:47 GetSingleValue result=40  Value=cccccccc
05:23:47 SkyScan query
05:23:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:23:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:47 Parameters OK
05:23:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:47 Set A/D data flow result=40
05:23:47 Set A/D channel type result=40
05:23:47 Set A/D encoding result=40
05:23:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:47 Set channel filter=0.000000e+000  result=40
05:23:47 Config A/D  Result=40
05:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:47 Get A/D filter: -9.255963e+061  result=40
05:23:47 Get A/D value=-858993460  result=40
05:23:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:23:47 Parameters OK
05:23:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:23:47 Set A/D data flow result=40
05:23:47 Set A/D channel type result=40
05:23:47 Set A/D encoding result=40
05:23:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:23:47 Set channel filter=0.000000e+000  result=40
05:23:47 Config A/D  Result=40
05:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:23:47 Get A/D filter: -9.255963e+061  result=40
05:23:47 Get A/D value=-858993460  result=40
05:23:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:23:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:23:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:23:47 Aux=
05:23:47 Message to Camera, serial 183061 queued
[UTC 2019-3-9  05:23:48]
05:24:24 Received message from Master: op=PointingHead serial=183074
05:24:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:24:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:24:24 Point started: ret=0
05:24:24 point_skyscan result=0
05:24:25 Check angles
05:24:25 SkyScan query
05:24:26 SkyScan query done: ret=0  az=136.41<-9094  ze=-6.51<-12434  Statuses=0009 0008
05:24:26 Msec=0  True Az=136.41  Ze=-6.51  Az status=0009  Ze status=0008
05:24:26 Check angles
05:24:26 SkyScan query
05:24:26 SkyScan query done: ret=0  az=153.93<-10262  ze=-6.495<-12433  Statuses=0009 0008
05:24:26 Msec=750  True Az=153.93  Ze=-6.495  Az status=0009  Ze status=0008
05:24:27 Check angles
05:24:27 SkyScan query
05:24:27 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
05:24:27 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
05:24:27 Check angles
05:24:27 SkyScan query
05:24:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:24:28 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:24:28 Message to Master queued w/err=0: serial=183074 error=0
05:24:33 Received message from Master: op=Filter serial=183075
05:24:33 Color wheel filter change from 0 to 0
05:24:33 FLIGetFilterPos err=0  currentPosition=0
05:24:33 FLIGetStepsRemaining err=0  RemainingSteps=0
05:24:33 Filter is already there-color wheel unchanged
05:24:33 Received message from Master: op=Shutter serial=183076
05:24:33 Shutter LASER close
05:24:33 Received message from Camera: op=State serial=183078
05:24:33 GetSingleValue result=40  Value=cccccccc
05:24:33 SkyScan query
05:24:34 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:24:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:24:34 Parameters OK
05:24:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:24:34 Set A/D data flow result=40
05:24:34 Set A/D channel type result=40
05:24:34 Set A/D encoding result=40
05:24:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:24:34 Set channel filter=0.000000e+000  result=40
05:24:34 Config A/D  Result=40
05:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:24:34 Get A/D filter: -9.255963e+061  result=40
05:24:34 Get A/D value=-858993460  result=40
05:24:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:24:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:24:34 Parameters OK
05:24:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:24:34 Set A/D data flow result=40
05:24:34 Set A/D channel type result=40
05:24:34 Set A/D encoding result=40
05:24:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:24:34 Set channel filter=0.000000e+000  result=40
05:24:34 Config A/D  Result=40
05:24:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:24:34 Get A/D filter: -9.255963e+061  result=40
05:24:34 Get A/D value=-858993460  result=40
05:24:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:24:34 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:24:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:24:34 Aux=
05:24:34 Message to Camera, serial 183078 queued
05:25:11 Received message from Master: op=PointingHead serial=183091
05:25:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:25:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:25:11 Point started: ret=0
05:25:11 point_skyscan result=0
05:25:12 Check angles
05:25:12 SkyScan query
05:25:12 SkyScan query done: ret=0  az=153.3<-10220  ze=6.51<-11566  Statuses=0009 0008
05:25:12 Msec=0  True Az=153.3  Ze=6.51  Az status=0009  Ze status=0008
05:25:12 Check angles
05:25:12 SkyScan query
05:25:13 SkyScan query done: ret=0  az=135.405<-9027  ze=6.495<-11567  Statuses=0009 0008
05:25:13 Msec=750  True Az=135.405  Ze=6.495  Az status=0009  Ze status=0008
05:25:13 Check angles
05:25:13 SkyScan query
05:25:14 SkyScan query done: ret=0  az=117.585<-7839  ze=6.495<-11567  Statuses=0009 0008
05:25:14 Msec=1500  True Az=117.585  Ze=6.495  Az status=0009  Ze status=0008
05:25:14 Check angles
05:25:14 SkyScan query
05:25:14 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
05:25:14 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
05:25:14 Message to Master queued w/err=0: serial=183091 error=0
05:25:19 Received message from Master: op=Filter serial=183092
05:25:19 Color wheel filter change from 0 to 0
05:25:19 FLIGetFilterPos err=0  currentPosition=0
05:25:19 FLIGetStepsRemaining err=0  RemainingSteps=0
05:25:19 Filter is already there-color wheel unchanged
05:25:20 Received message from Master: op=Shutter serial=183093
05:25:20 Shutter LASER close
05:25:20 Received message from Camera: op=State serial=183095
05:25:20 GetSingleValue result=40  Value=cccccccc
05:25:20 SkyScan query
05:25:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:25:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:25:20 Parameters OK
05:25:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:25:20 Set A/D data flow result=40
05:25:20 Set A/D channel type result=40
05:25:20 Set A/D encoding result=40
05:25:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:25:20 Set channel filter=0.000000e+000  result=40
05:25:20 Config A/D  Result=40
05:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:25:20 Get A/D filter: -9.255963e+061  result=40
05:25:20 Get A/D value=-858993460  result=40
05:25:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:25:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:25:20 Parameters OK
05:25:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:25:20 Set A/D data flow result=40
05:25:20 Set A/D channel type result=40
05:25:20 Set A/D encoding result=40
05:25:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:25:20 Set channel filter=0.000000e+000  result=40
05:25:20 Config A/D  Result=40
05:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:25:20 Get A/D filter: -9.255963e+061  result=40
05:25:20 Get A/D value=-858993460  result=40
05:25:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:25:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:25:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:25:20 Aux=
05:25:20 Message to Camera, serial 183095 queued
05:25:56 Received message from Master: op=PointingHead serial=183107
05:25:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:25:56 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:25:57 Point started: ret=0
05:25:57 point_skyscan result=0
05:25:57 Check angles
05:25:57 SkyScan query
05:25:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
05:25:58 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
05:25:58 Check angles
05:25:58 SkyScan query
05:25:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.43<-14962  Statuses=0008 0009
05:25:59 Msec=750  True Az=112.995  Ze=-44.43  Az status=0008  Ze status=0009
05:25:59 Check angles
05:25:59 SkyScan query
05:25:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
05:25:59 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
05:26:00 Check angles
05:26:00 SkyScan query
05:26:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.76<-17784  Statuses=0008 0009
05:26:00 Msec=2250  True Az=112.995  Ze=-86.76  Az status=0008  Ze status=0009
05:26:00 Check angles
05:26:00 SkyScan query
05:26:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.135<-19209  Statuses=0008 0009
05:26:01 Msec=3000  True Az=112.995  Ze=-108.135  Az status=0008  Ze status=0009
05:26:01 Check angles
05:26:01 SkyScan query
05:26:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.09<-20606  Statuses=0008 0009
05:26:02 Msec=3750  True Az=112.995  Ze=-129.09  Az status=0008  Ze status=0009
05:26:02 Check angles
05:26:02 SkyScan query
05:26:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.045<-22003  Statuses=0008 0009
05:26:02 Msec=4500  True Az=112.995  Ze=-150.045  Az status=0008  Ze status=0009
05:26:03 Check angles
05:26:03 SkyScan query
05:26:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.895<-23393  Statuses=0008 0009
05:26:03 Msec=5250  True Az=112.995  Ze=-170.895  Az status=0008  Ze status=0009
05:26:03 Check angles
05:26:03 SkyScan query
05:26:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:26:04 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:26:04 Message to Master queued w/err=0: serial=183107 error=0
05:26:09 Received message from Master: op=Filter serial=183108
05:26:09 Color wheel filter change from 0 to 0
05:26:09 FLIGetFilterPos err=0  currentPosition=0
05:26:09 FLIGetStepsRemaining err=0  RemainingSteps=0
05:26:09 Filter is already there-color wheel unchanged
05:26:09 Received message from Master: op=Shutter serial=183109
05:26:09 Shutter LASER open
05:26:09 Received message from Camera: op=State serial=183111
05:26:09 GetSingleValue result=40  Value=cccccccc
05:26:09 SkyScan query
05:26:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:26:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:10 Parameters OK
05:26:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:10 Set A/D data flow result=40
05:26:10 Set A/D channel type result=40
05:26:10 Set A/D encoding result=40
05:26:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:10 Set channel filter=0.000000e+000  result=40
05:26:10 Config A/D  Result=40
05:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:10 Get A/D filter: -9.255963e+061  result=40
05:26:10 Get A/D value=-858993460  result=40
05:26:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:10 Parameters OK
05:26:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:10 Set A/D data flow result=40
05:26:10 Set A/D channel type result=40
05:26:10 Set A/D encoding result=40
05:26:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:10 Set channel filter=0.000000e+000  result=40
05:26:10 Config A/D  Result=40
05:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:10 Get A/D filter: -9.255963e+061  result=40
05:26:10 Get A/D value=-858993460  result=40
05:26:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:26:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:26:10 Aux=
05:26:10 Message to Camera, serial 183111 queued
05:26:17 Received message from Master: op=Shutter serial=183120
05:26:17 Shutter LASER close
05:26:18 Received message from Master: op=PointingHead serial=183124
05:26:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:26:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:26:18 Point started: ret=0
05:26:18 point_skyscan result=0
05:26:19 Check angles
05:26:19 SkyScan query
05:26:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.725<-21515  Statuses=0008 0009
05:26:19 Msec=0  True Az=112.995  Ze=-142.725  Az status=0008  Ze status=0009
05:26:20 Check angles
05:26:20 SkyScan query
05:26:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.77<-20118  Statuses=0008 0009
05:26:20 Msec=750  True Az=112.995  Ze=-121.77  Az status=0008  Ze status=0009
05:26:20 Check angles
05:26:20 SkyScan query
05:26:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.83<-18722  Statuses=0008 0009
05:26:21 Msec=1500  True Az=112.995  Ze=-100.83  Az status=0008  Ze status=0009
05:26:21 Check angles
05:26:21 SkyScan query
05:26:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.89<-17326  Statuses=0008 0009
05:26:22 Msec=2250  True Az=112.995  Ze=-79.89  Az status=0008  Ze status=0009
05:26:22 Check angles
05:26:22 SkyScan query
05:26:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.935<-15929  Statuses=0008 0009
05:26:22 Msec=3000  True Az=112.995  Ze=-58.935  Az status=0008  Ze status=0009
05:26:23 Check angles
05:26:23 SkyScan query
05:26:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.95<-14530  Statuses=0008 0009
05:26:23 Msec=3750  True Az=112.995  Ze=-37.95  Az status=0008  Ze status=0009
05:26:23 Check angles
05:26:23 SkyScan query
05:26:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.01<-13134  Statuses=0008 0009
05:26:24 Msec=4500  True Az=112.995  Ze=-17.01  Az status=0008  Ze status=0009
05:26:24 Check angles
05:26:24 SkyScan query
05:26:25 SkyScan query done: ret=0  az=112.995<-7533  ze=3.945<-11737  Statuses=0008 0009
05:26:25 Msec=5250  True Az=112.995  Ze=3.945  Az status=0008  Ze status=0009
05:26:25 Check angles
05:26:25 SkyScan query
05:26:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:26:25 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:26:25 Message to Master queued w/err=0: serial=183124 error=0
05:26:30 Received message from Master: op=Filter serial=183125
05:26:30 Color wheel filter change from 0 to 0
05:26:30 FLIGetFilterPos err=0  currentPosition=0
05:26:30 FLIGetStepsRemaining err=0  RemainingSteps=0
05:26:30 Filter is already there-color wheel unchanged
05:26:31 Received message from Master: op=Shutter serial=183126
05:26:31 Shutter LASER close
05:26:31 Received message from Camera: op=State serial=183128
05:26:31 GetSingleValue result=40  Value=cccccccc
05:26:31 SkyScan query
05:26:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:31 Parameters OK
05:26:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:31 Set A/D data flow result=40
05:26:31 Set A/D channel type result=40
05:26:31 Set A/D encoding result=40
05:26:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:31 Set channel filter=0.000000e+000  result=40
05:26:31 Config A/D  Result=40
05:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:31 Get A/D filter: -9.255963e+061  result=40
05:26:31 Get A/D value=-858993460  result=40
05:26:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:26:31 Parameters OK
05:26:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:26:31 Set A/D data flow result=40
05:26:31 Set A/D channel type result=40
05:26:31 Set A/D encoding result=40
05:26:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:26:31 Set channel filter=0.000000e+000  result=40
05:26:31 Config A/D  Result=40
05:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:26:31 Get A/D filter: -9.255963e+061  result=40
05:26:31 Get A/D value=-858993460  result=40
05:26:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:26:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:26:31 Aux=
05:26:31 Message to Camera, serial 183128 queued
05:27:08 Received message from Master: op=PointingHead serial=183141
05:27:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:27:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:27:09 Point started: ret=0
05:27:09 point_skyscan result=0
05:27:09 Check angles
05:27:09 SkyScan query
05:27:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:27:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:27:10 Message to Master queued w/err=0: serial=183141 error=0
05:27:15 Received message from Master: op=Filter serial=183142
05:27:15 Color wheel filter change from 0 to 0
05:27:15 FLIGetFilterPos err=0  currentPosition=0
05:27:15 FLIGetStepsRemaining err=0  RemainingSteps=0
05:27:15 Filter is already there-color wheel unchanged
05:27:15 Received message from Master: op=Shutter serial=183143
05:27:15 Shutter LASER close
05:27:15 Received message from Camera: op=State serial=183145
05:27:15 GetSingleValue result=40  Value=cccccccc
05:27:15 SkyScan query
05:27:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:27:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:27:16 Parameters OK
05:27:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:27:16 Set A/D data flow result=40
05:27:16 Set A/D channel type result=40
05:27:16 Set A/D encoding result=40
05:27:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:27:16 Set channel filter=0.000000e+000  result=40
05:27:16 Config A/D  Result=40
05:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:27:16 Get A/D filter: -9.255963e+061  result=40
05:27:16 Get A/D value=-858993460  result=40
05:27:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:27:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:27:16 Parameters OK
05:27:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:27:16 Set A/D data flow result=40
05:27:16 Set A/D channel type result=40
05:27:16 Set A/D encoding result=40
05:27:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:27:16 Set channel filter=0.000000e+000  result=40
05:27:16 Config A/D  Result=40
05:27:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:27:16 Get A/D filter: -9.255963e+061  result=40
05:27:16 Get A/D value=-858993460  result=40
05:27:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:27:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:27:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:27:16 Aux=
05:27:16 Message to Camera, serial 183145 queued
05:27:52 Received message from Master: op=PointingHead serial=183158
05:27:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:27:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:27:53 Point started: ret=0
05:27:53 point_skyscan result=0
05:27:54 Check angles
05:27:54 SkyScan query
05:27:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:27:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:27:54 Message to Master queued w/err=0: serial=183158 error=0
05:27:59 Received message from Master: op=Filter serial=183159
05:27:59 Color wheel filter change from 0 to 0
05:27:59 FLIGetFilterPos err=0  currentPosition=0
05:27:59 FLIGetStepsRemaining err=0  RemainingSteps=0
05:27:59 Filter is already there-color wheel unchanged
05:27:59 Received message from Master: op=Shutter serial=183160
05:27:59 Shutter LASER close
05:27:59 Received message from Camera: op=State serial=183162
05:27:59 GetSingleValue result=40  Value=cccccccc
05:27:59 SkyScan query
05:28:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:28:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:28:00 Parameters OK
05:28:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:28:00 Set A/D data flow result=40
05:28:00 Set A/D channel type result=40
05:28:00 Set A/D encoding result=40
05:28:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:28:00 Set channel filter=0.000000e+000  result=40
05:28:00 Config A/D  Result=40
05:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:28:00 Get A/D filter: -9.255963e+061  result=40
05:28:00 Get A/D value=-858993460  result=40
05:28:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:28:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:28:00 Parameters OK
05:28:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:28:00 Set A/D data flow result=40
05:28:00 Set A/D channel type result=40
05:28:00 Set A/D encoding result=40
05:28:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:28:00 Set channel filter=0.000000e+000  result=40
05:28:00 Config A/D  Result=40
05:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:28:00 Get A/D filter: -9.255963e+061  result=40
05:28:00 Get A/D value=-858993460  result=40
05:28:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:28:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:28:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:28:00 Aux=
05:28:00 Message to Camera, serial 183162 queued
05:28:37 Received message from Master: op=PointingHead serial=183175
05:28:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:28:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:28:37 Point started: ret=0
05:28:37 point_skyscan result=0
05:28:38 Check angles
05:28:38 SkyScan query
05:28:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:28:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:28:38 Message to Master queued w/err=0: serial=183175 error=0
05:28:43 Received message from Master: op=Filter serial=183176
05:28:43 Color wheel filter change from 0 to 0
05:28:43 FLIGetFilterPos err=0  currentPosition=0
05:28:43 FLIGetStepsRemaining err=0  RemainingSteps=0
05:28:43 Filter is already there-color wheel unchanged
05:28:44 Received message from Master: op=Shutter serial=183177
05:28:44 Shutter LASER close
05:28:44 Received message from Camera: op=State serial=183179
05:28:44 GetSingleValue result=40  Value=cccccccc
05:28:44 SkyScan query
05:28:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:28:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:28:44 Parameters OK
05:28:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:28:44 Set A/D data flow result=40
05:28:44 Set A/D channel type result=40
05:28:44 Set A/D encoding result=40
05:28:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:28:44 Set channel filter=0.000000e+000  result=40
05:28:44 Config A/D  Result=40
05:28:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:28:44 Get A/D filter: -9.255963e+061  result=40
05:28:44 Get A/D value=-858993460  result=40
05:28:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:28:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:28:44 Parameters OK
05:28:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:28:44 Set A/D data flow result=40
05:28:44 Set A/D channel type result=40
05:28:44 Set A/D encoding result=40
05:28:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:28:44 Set channel filter=0.000000e+000  result=40
05:28:44 Config A/D  Result=40
05:28:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:28:44 Get A/D filter: -9.255963e+061  result=40
05:28:44 Get A/D value=-858993460  result=40
05:28:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:28:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:28:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:28:44 Aux=
05:28:44 Message to Camera, serial 183179 queued
05:29:21 Received message from Master: op=PointingHead serial=183192
05:29:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:29:21 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:29:21 Point started: ret=0
05:29:21 point_skyscan result=0
05:29:22 Check angles
05:29:22 SkyScan query
05:29:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.355<-13557  Statuses=0008 0009
05:29:23 Msec=0  True Az=112.995  Ze=-23.355  Az status=0008  Ze status=0009
05:29:23 Check angles
05:29:23 SkyScan query
05:29:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.76<-14984  Statuses=0008 0009
05:29:23 Msec=750  True Az=112.995  Ze=-44.76  Az status=0008  Ze status=0009
05:29:24 Check angles
05:29:24 SkyScan query
05:29:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.715<-16381  Statuses=0008 0009
05:29:24 Msec=1500  True Az=112.995  Ze=-65.715  Az status=0008  Ze status=0009
05:29:24 Check angles
05:29:24 SkyScan query
05:29:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.655<-17777  Statuses=0008 0009
05:29:25 Msec=2250  True Az=112.995  Ze=-86.655  Az status=0008  Ze status=0009
05:29:25 Check angles
05:29:25 SkyScan query
05:29:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.045<-19203  Statuses=0008 0009
05:29:26 Msec=3000  True Az=112.995  Ze=-108.045  Az status=0008  Ze status=0009
05:29:26 Check angles
05:29:26 SkyScan query
05:29:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.435<-20629  Statuses=0008 0009
05:29:27 Msec=3750  True Az=112.995  Ze=-129.435  Az status=0008  Ze status=0009
05:29:27 Check angles
05:29:27 SkyScan query
05:29:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.375<-22025  Statuses=0008 0009
05:29:27 Msec=4500  True Az=112.995  Ze=-150.375  Az status=0008  Ze status=0009
05:29:27 Check angles
05:29:27 SkyScan query
05:29:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.165<-23411  Statuses=0008 0009
05:29:28 Msec=5250  True Az=112.995  Ze=-171.165  Az status=0008  Ze status=0009
05:29:28 Check angles
05:29:28 SkyScan query
05:29:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:29:29 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:29:29 Message to Master queued w/err=0: serial=183192 error=0
05:29:34 Received message from Master: op=Filter serial=183193
05:29:34 Color wheel filter change from 0 to 0
05:29:34 FLIGetFilterPos err=0  currentPosition=0
05:29:34 FLIGetStepsRemaining err=0  RemainingSteps=0
05:29:34 Filter is already there-color wheel unchanged
05:29:34 Received message from Master: op=Shutter serial=183194
05:29:34 Shutter LASER open
05:29:34 Received message from Camera: op=State serial=183196
05:29:34 GetSingleValue result=40  Value=cccccccc
05:29:34 SkyScan query
05:29:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:29:35 Parameters OK
05:29:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:29:35 Set A/D data flow result=40
05:29:35 Set A/D channel type result=40
05:29:35 Set A/D encoding result=40
05:29:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:29:35 Set channel filter=0.000000e+000  result=40
05:29:35 Config A/D  Result=40
05:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:29:35 Get A/D filter: -9.255963e+061  result=40
05:29:35 Get A/D value=-858993460  result=40
05:29:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:29:35 Parameters OK
05:29:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:29:35 Set A/D data flow result=40
05:29:35 Set A/D channel type result=40
05:29:35 Set A/D encoding result=40
05:29:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:29:35 Set channel filter=0.000000e+000  result=40
05:29:35 Config A/D  Result=40
05:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:29:35 Get A/D filter: -9.255963e+061  result=40
05:29:35 Get A/D value=-858993460  result=40
05:29:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:29:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:29:35 Aux=
05:29:35 Message to Camera, serial 183196 queued
05:29:43 Received message from Master: op=Shutter serial=183206
05:29:43 Shutter LASER close
05:29:44 Received message from Master: op=PointingHead serial=183210
05:29:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:29:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:29:44 Point started: ret=0
05:29:44 point_skyscan result=0
05:29:45 Check angles
05:29:45 SkyScan query
05:29:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
05:29:45 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
05:29:46 Check angles
05:29:46 SkyScan query
05:29:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.935<-20129  Statuses=0008 0009
05:29:46 Msec=750  True Az=112.995  Ze=-121.935  Az status=0008  Ze status=0009
05:29:46 Check angles
05:29:46 SkyScan query
05:29:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.01<-18734  Statuses=0008 0009
05:29:47 Msec=1500  True Az=112.995  Ze=-101.01  Az status=0008  Ze status=0009
05:29:47 Check angles
05:29:47 SkyScan query
05:29:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.055<-17337  Statuses=0008 0009
05:29:48 Msec=2250  True Az=112.995  Ze=-80.055  Az status=0008  Ze status=0009
05:29:48 Check angles
05:29:48 SkyScan query
05:29:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.115<-15941  Statuses=0008 0009
05:29:48 Msec=3000  True Az=112.995  Ze=-59.115  Az status=0008  Ze status=0009
05:29:49 Check angles
05:29:49 SkyScan query
05:29:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.115<-14541  Statuses=0008 0009
05:29:49 Msec=3750  True Az=112.995  Ze=-38.115  Az status=0008  Ze status=0009
05:29:49 Check angles
05:29:49 SkyScan query
05:29:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.175<-13145  Statuses=0008 0009
05:29:50 Msec=4500  True Az=112.995  Ze=-17.175  Az status=0008  Ze status=0009
05:29:50 Check angles
05:29:50 SkyScan query
05:29:51 SkyScan query done: ret=0  az=112.995<-7533  ze=3.78<-11748  Statuses=0008 0009
05:29:51 Msec=5250  True Az=112.995  Ze=3.78  Az status=0008  Ze status=0009
05:29:51 Check angles
05:29:51 SkyScan query
05:29:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:29:51 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:29:51 Message to Master queued w/err=0: serial=183210 error=0
05:29:56 Received message from Master: op=Filter serial=183211
05:29:56 Color wheel filter change from 0 to 0
05:29:56 FLIGetFilterPos err=0  currentPosition=0
05:29:56 FLIGetStepsRemaining err=0  RemainingSteps=0
05:29:56 Filter is already there-color wheel unchanged
05:29:57 Received message from Master: op=Shutter serial=183212
05:29:57 Shutter LASER close
05:29:57 Received message from Camera: op=State serial=183214
05:29:57 GetSingleValue result=40  Value=cccccccc
05:29:57 SkyScan query
05:29:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:29:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:29:57 Parameters OK
05:29:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:29:57 Set A/D data flow result=40
05:29:57 Set A/D channel type result=40
05:29:57 Set A/D encoding result=40
05:29:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:29:57 Set channel filter=0.000000e+000  result=40
05:29:57 Config A/D  Result=40
05:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:29:57 Get A/D filter: -9.255963e+061  result=40
05:29:57 Get A/D value=-858993460  result=40
05:29:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:29:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:29:57 Parameters OK
05:29:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:29:57 Set A/D data flow result=40
05:29:57 Set A/D channel type result=40
05:29:57 Set A/D encoding result=40
05:29:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:29:57 Set channel filter=0.000000e+000  result=40
05:29:57 Config A/D  Result=40
05:29:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:29:57 Get A/D filter: -9.255963e+061  result=40
05:29:57 Get A/D value=-858993460  result=40
05:29:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:29:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:29:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:29:57 Aux=
05:29:57 Message to Camera, serial 183214 queued
05:30:34 Received message from Master: op=PointingHead serial=183227
05:30:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:30:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:30:35 Point started: ret=0
05:30:35 point_skyscan result=0
05:30:35 Check angles
05:30:35 SkyScan query
05:30:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:30:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:30:36 Message to Master queued w/err=0: serial=183227 error=0
05:30:41 Received message from Master: op=Filter serial=183228
05:30:41 Color wheel filter change from 0 to 0
05:30:41 FLIGetFilterPos err=0  currentPosition=0
05:30:41 FLIGetStepsRemaining err=0  RemainingSteps=0
05:30:41 Filter is already there-color wheel unchanged
05:30:41 Received message from Master: op=Shutter serial=183229
05:30:41 Shutter LASER close
05:30:41 Received message from Camera: op=State serial=183231
05:30:41 GetSingleValue result=40  Value=cccccccc
05:30:41 SkyScan query
05:30:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:30:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:30:42 Parameters OK
05:30:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:30:42 Set A/D data flow result=40
05:30:42 Set A/D channel type result=40
05:30:42 Set A/D encoding result=40
05:30:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:30:42 Set channel filter=0.000000e+000  result=40
05:30:42 Config A/D  Result=40
05:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:30:42 Get A/D filter: -9.255963e+061  result=40
05:30:42 Get A/D value=-858993460  result=40
05:30:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:30:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:30:42 Parameters OK
05:30:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:30:42 Set A/D data flow result=40
05:30:42 Set A/D channel type result=40
05:30:42 Set A/D encoding result=40
05:30:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:30:42 Set channel filter=0.000000e+000  result=40
05:30:42 Config A/D  Result=40
05:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:30:42 Get A/D filter: -9.255963e+061  result=40
05:30:42 Get A/D value=-858993460  result=40
05:30:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:30:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:30:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:30:42 Aux=
05:30:42 Message to Camera, serial 183231 queued
05:31:19 Received message from Master: op=PointingHead serial=183244
05:31:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:31:19 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:31:19 Point started: ret=0
05:31:19 point_skyscan result=0
05:31:20 Check angles
05:31:20 SkyScan query
05:31:20 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.495<-12433  Statuses=0009 0008
05:31:20 Msec=0  True Az=135.915  Ze=-6.495  Az status=0009  Ze status=0008
05:31:20 Check angles
05:31:20 SkyScan query
05:31:21 SkyScan query done: ret=0  az=153.765<-10251  ze=-6.48<-12432  Statuses=0009 0008
05:31:21 Msec=750  True Az=153.765  Ze=-6.48  Az status=0009  Ze status=0008
05:31:21 Check angles
05:31:21 SkyScan query
05:31:22 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.48<-12432  Statuses=0009 0008
05:31:22 Msec=1500  True Az=171.315  Ze=-6.48  Az status=0009  Ze status=0008
05:31:22 Check angles
05:31:22 SkyScan query
05:31:22 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
05:31:22 Msec=2250  True Az=175.995  Ze=-6.48  Az status=0008  Ze status=0008
05:31:22 Message to Master queued w/err=0: serial=183244 error=0
05:31:27 Received message from Master: op=Filter serial=183245
05:31:27 Color wheel filter change from 0 to 0
05:31:27 FLIGetFilterPos err=0  currentPosition=0
05:31:27 FLIGetStepsRemaining err=0  RemainingSteps=0
05:31:27 Filter is already there-color wheel unchanged
05:31:28 Received message from Master: op=Shutter serial=183246
05:31:28 Shutter LASER close
05:31:28 Received message from Camera: op=State serial=183248
05:31:28 GetSingleValue result=40  Value=cccccccc
05:31:28 SkyScan query
05:31:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.48<-12432  Statuses=0008 0008
05:31:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:31:28 Parameters OK
05:31:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:31:28 Set A/D data flow result=40
05:31:28 Set A/D channel type result=40
05:31:28 Set A/D encoding result=40
05:31:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:31:28 Set channel filter=0.000000e+000  result=40
05:31:28 Config A/D  Result=40
05:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:31:28 Get A/D filter: -9.255963e+061  result=40
05:31:28 Get A/D value=-858993460  result=40
05:31:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:31:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:31:28 Parameters OK
05:31:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:31:28 Set A/D data flow result=40
05:31:28 Set A/D channel type result=40
05:31:28 Set A/D encoding result=40
05:31:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:31:28 Set channel filter=0.000000e+000  result=40
05:31:28 Config A/D  Result=40
05:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:31:28 Get A/D filter: -9.255963e+061  result=40
05:31:28 Get A/D value=-858993460  result=40
05:31:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:31:28 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.480000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:31:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:31:28 Aux=
05:31:28 Message to Camera, serial 183248 queued
05:32:05 Received message from Master: op=PointingHead serial=183261
05:32:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:32:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:32:05 Point started: ret=0
05:32:05 point_skyscan result=0
05:32:06 Check angles
05:32:06 SkyScan query
05:32:07 SkyScan query done: ret=0  az=152.55<-10170  ze=6.51<-11566  Statuses=0009 0008
05:32:07 Msec=0  True Az=152.55  Ze=6.51  Az status=0009  Ze status=0008
05:32:07 Check angles
05:32:07 SkyScan query
05:32:08 SkyScan query done: ret=0  az=134.595<-8973  ze=6.495<-11567  Statuses=0009 0008
05:32:08 Msec=750  True Az=134.595  Ze=6.495  Az status=0009  Ze status=0008
05:32:08 Check angles
05:32:08 SkyScan query
05:32:08 SkyScan query done: ret=0  az=117.18<-7812  ze=6.495<-11567  Statuses=0009 0008
05:32:08 Msec=1500  True Az=117.18  Ze=6.495  Az status=0009  Ze status=0008
05:32:08 Check angles
05:32:08 SkyScan query
05:32:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:32:09 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:32:09 Message to Master queued w/err=0: serial=183261 error=0
05:32:14 Received message from Master: op=Filter serial=183262
05:32:14 Color wheel filter change from 0 to 0
05:32:14 FLIGetFilterPos err=0  currentPosition=0
05:32:14 FLIGetStepsRemaining err=0  RemainingSteps=0
05:32:14 Filter is already there-color wheel unchanged
05:32:14 Received message from Master: op=Shutter serial=183263
05:32:14 Shutter LASER close
05:32:14 Received message from Camera: op=State serial=183265
05:32:14 GetSingleValue result=40  Value=cccccccc
05:32:14 SkyScan query
05:32:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:32:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:32:15 Parameters OK
05:32:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:32:15 Set A/D data flow result=40
05:32:15 Set A/D channel type result=40
05:32:15 Set A/D encoding result=40
05:32:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:32:15 Set channel filter=0.000000e+000  result=40
05:32:15 Config A/D  Result=40
05:32:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:32:15 Get A/D filter: -9.255963e+061  result=40
05:32:15 Get A/D value=-858993460  result=40
05:32:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:32:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:32:15 Parameters OK
05:32:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:32:15 Set A/D data flow result=40
05:32:15 Set A/D channel type result=40
05:32:15 Set A/D encoding result=40
05:32:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:32:15 Set channel filter=0.000000e+000  result=40
05:32:15 Config A/D  Result=40
05:32:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:32:15 Get A/D filter: -9.255963e+061  result=40
05:32:15 Get A/D value=-858993460  result=40
05:32:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:32:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:32:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:32:15 Aux=
05:32:15 Message to Camera, serial 183265 queued
05:32:52 Received message from Master: op=PointingHead serial=183278
05:32:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:32:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:32:52 Point started: ret=0
05:32:52 point_skyscan result=0
05:32:53 Check angles
05:32:53 SkyScan query
05:32:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
05:32:53 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
05:32:54 Check angles
05:32:54 SkyScan query
05:32:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
05:32:54 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
05:32:54 Check angles
05:32:54 SkyScan query
05:32:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
05:32:55 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
05:32:55 Check angles
05:32:55 SkyScan query
05:32:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.745<-17783  Statuses=0008 0009
05:32:56 Msec=2250  True Az=112.995  Ze=-86.745  Az status=0008  Ze status=0009
05:32:56 Check angles
05:32:56 SkyScan query
05:32:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.12<-19208  Statuses=0008 0009
05:32:56 Msec=3000  True Az=112.995  Ze=-108.12  Az status=0008  Ze status=0009
05:32:57 Check angles
05:32:57 SkyScan query
05:32:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.525<-20635  Statuses=0008 0009
05:32:57 Msec=3750  True Az=112.995  Ze=-129.525  Az status=0008  Ze status=0009
05:32:57 Check angles
05:32:57 SkyScan query
05:32:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.465<-22031  Statuses=0008 0009
05:32:58 Msec=4500  True Az=112.995  Ze=-150.465  Az status=0008  Ze status=0009
05:32:58 Check angles
05:32:58 SkyScan query
05:32:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.225<-23415  Statuses=0008 0009
05:32:59 Msec=5250  True Az=112.995  Ze=-171.225  Az status=0008  Ze status=0009
05:32:59 Check angles
05:32:59 SkyScan query
05:32:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:32:59 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:32:59 Message to Master queued w/err=0: serial=183278 error=0
05:33:04 Received message from Master: op=Filter serial=183279
05:33:04 Color wheel filter change from 0 to 0
05:33:04 FLIGetFilterPos err=0  currentPosition=0
05:33:04 FLIGetStepsRemaining err=0  RemainingSteps=0
05:33:04 Filter is already there-color wheel unchanged
05:33:05 Received message from Master: op=Shutter serial=183280
05:33:05 Shutter LASER open
05:33:05 Received message from Camera: op=State serial=183282
05:33:05 GetSingleValue result=40  Value=cccccccc
05:33:05 SkyScan query
05:33:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:33:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:05 Parameters OK
05:33:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:05 Set A/D data flow result=40
05:33:05 Set A/D channel type result=40
05:33:05 Set A/D encoding result=40
05:33:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:05 Set channel filter=0.000000e+000  result=40
05:33:05 Config A/D  Result=40
05:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:05 Get A/D filter: -9.255963e+061  result=40
05:33:05 Get A/D value=-858993460  result=40
05:33:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:05 Parameters OK
05:33:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:05 Set A/D data flow result=40
05:33:05 Set A/D channel type result=40
05:33:05 Set A/D encoding result=40
05:33:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:05 Set channel filter=0.000000e+000  result=40
05:33:05 Config A/D  Result=40
05:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:05 Get A/D filter: -9.255963e+061  result=40
05:33:05 Get A/D value=-858993460  result=40
05:33:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:33:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:33:05 Aux=
05:33:05 Message to Camera, serial 183282 queued
05:33:14 Received message from Master: op=Shutter serial=183292
05:33:14 Shutter LASER close
05:33:14 Received message from Master: op=PointingHead serial=183296
05:33:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:33:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:33:15 Point started: ret=0
05:33:15 point_skyscan result=0
05:33:15 Check angles
05:33:15 SkyScan query
05:33:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.86<-21524  Statuses=0008 0009
05:33:16 Msec=0  True Az=112.995  Ze=-142.86  Az status=0008  Ze status=0009
05:33:16 Check angles
05:33:16 SkyScan query
05:33:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.47<-20098  Statuses=0008 0009
05:33:17 Msec=750  True Az=112.995  Ze=-121.47  Az status=0008  Ze status=0009
05:33:17 Check angles
05:33:17 SkyScan query
05:33:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.515<-18701  Statuses=0008 0009
05:33:17 Msec=1500  True Az=112.995  Ze=-100.515  Az status=0008  Ze status=0009
05:33:18 Check angles
05:33:18 SkyScan query
05:33:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.56<-17304  Statuses=0008 0009
05:33:18 Msec=2250  True Az=112.995  Ze=-79.56  Az status=0008  Ze status=0009
05:33:18 Check angles
05:33:18 SkyScan query
05:33:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.155<-15877  Statuses=0008 0009
05:33:19 Msec=3000  True Az=112.995  Ze=-58.155  Az status=0008  Ze status=0009
05:33:19 Check angles
05:33:19 SkyScan query
05:33:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.78<-14452  Statuses=0008 0009
05:33:20 Msec=3750  True Az=112.995  Ze=-36.78  Az status=0008  Ze status=0009
05:33:20 Check angles
05:33:20 SkyScan query
05:33:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.795<-13053  Statuses=0008 0009
05:33:20 Msec=4500  True Az=112.995  Ze=-15.795  Az status=0008  Ze status=0009
05:33:21 Check angles
05:33:21 SkyScan query
05:33:21 SkyScan query done: ret=0  az=112.995<-7533  ze=5.205<-11653  Statuses=0008 0009
05:33:21 Msec=5250  True Az=112.995  Ze=5.205  Az status=0008  Ze status=0009
05:33:21 Check angles
05:33:21 SkyScan query
05:33:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:33:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:33:22 Message to Master queued w/err=0: serial=183296 error=0
05:33:27 Received message from Master: op=Filter serial=183297
05:33:27 Color wheel filter change from 0 to 0
05:33:27 FLIGetFilterPos err=0  currentPosition=0
05:33:27 FLIGetStepsRemaining err=0  RemainingSteps=0
05:33:27 Filter is already there-color wheel unchanged
05:33:27 Received message from Master: op=Shutter serial=183298
05:33:27 Shutter LASER close
05:33:27 Received message from Camera: op=State serial=183300
05:33:27 GetSingleValue result=40  Value=cccccccc
05:33:27 SkyScan query
05:33:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:33:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:28 Parameters OK
05:33:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:28 Set A/D data flow result=40
05:33:28 Set A/D channel type result=40
05:33:28 Set A/D encoding result=40
05:33:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:28 Set channel filter=0.000000e+000  result=40
05:33:28 Config A/D  Result=40
05:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:28 Get A/D filter: -9.255963e+061  result=40
05:33:28 Get A/D value=-858993460  result=40
05:33:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:33:28 Parameters OK
05:33:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:33:28 Set A/D data flow result=40
05:33:28 Set A/D channel type result=40
05:33:28 Set A/D encoding result=40
05:33:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:33:28 Set channel filter=0.000000e+000  result=40
05:33:28 Config A/D  Result=40
05:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:33:28 Get A/D filter: -9.255963e+061  result=40
05:33:28 Get A/D value=-858993460  result=40
05:33:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:33:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:33:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:33:28 Aux=
05:33:28 Message to Camera, serial 183300 queued
05:33:36 Received message from Master: op=Identify serial=183301
05:34:05 Received message from Master: op=PointingHead serial=183316
05:34:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:34:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:34:05 Point started: ret=0
05:34:05 point_skyscan result=0
05:34:06 Check angles
05:34:06 SkyScan query
05:34:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:34:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:34:06 Message to Master queued w/err=0: serial=183316 error=0
05:34:11 Received message from Master: op=Filter serial=183317
05:34:11 Color wheel filter change from 0 to 0
05:34:11 FLIGetFilterPos err=0  currentPosition=0
05:34:11 FLIGetStepsRemaining err=0  RemainingSteps=0
05:34:11 Filter is already there-color wheel unchanged
05:34:12 Received message from Master: op=Shutter serial=183318
05:34:12 Shutter LASER close
05:34:12 Received message from Camera: op=State serial=183320
05:34:12 GetSingleValue result=40  Value=cccccccc
05:34:12 SkyScan query
05:34:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:34:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:34:12 Parameters OK
05:34:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:34:12 Set A/D data flow result=40
05:34:12 Set A/D channel type result=40
05:34:12 Set A/D encoding result=40
05:34:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:34:12 Set channel filter=0.000000e+000  result=40
05:34:12 Config A/D  Result=40
05:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:34:12 Get A/D filter: -9.255963e+061  result=40
05:34:12 Get A/D value=-858993460  result=40
05:34:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:34:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:34:12 Parameters OK
05:34:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:34:12 Set A/D data flow result=40
[UTC 2019-3-9  05:34:12]
05:34:12 Set A/D channel type result=40
05:34:12 Set A/D encoding result=40
05:34:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:34:12 Set channel filter=0.000000e+000  result=40
05:34:12 Config A/D  Result=40
05:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:34:12 Get A/D filter: -9.255963e+061  result=40
05:34:12 Get A/D value=-858993460  result=40
05:34:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:34:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:34:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:34:12 Aux=
05:34:12 Message to Camera, serial 183320 queued
05:34:49 Received message from Master: op=PointingHead serial=183333
05:34:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:34:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:34:49 Point started: ret=0
05:34:49 point_skyscan result=0
05:34:50 Check angles
05:34:50 SkyScan query
05:34:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:34:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:34:51 Message to Master queued w/err=0: serial=183333 error=0
05:34:56 Received message from Master: op=Filter serial=183334
05:34:56 Color wheel filter change from 0 to 0
05:34:56 FLIGetFilterPos err=0  currentPosition=0
05:34:56 FLIGetStepsRemaining err=0  RemainingSteps=0
05:34:56 Filter is already there-color wheel unchanged
05:34:56 Received message from Master: op=Shutter serial=183335
05:34:56 Shutter LASER close
05:34:56 Received message from Camera: op=State serial=183337
05:34:56 GetSingleValue result=40  Value=cccccccc
05:34:56 SkyScan query
05:34:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:34:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:34:56 Parameters OK
05:34:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:34:56 Set A/D data flow result=40
05:34:56 Set A/D channel type result=40
05:34:56 Set A/D encoding result=40
05:34:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:34:56 Set channel filter=0.000000e+000  result=40
05:34:56 Config A/D  Result=40
05:34:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:34:56 Get A/D filter: -9.255963e+061  result=40
05:34:56 Get A/D value=-858993460  result=40
05:34:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:34:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:34:56 Parameters OK
05:34:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:34:56 Set A/D data flow result=40
05:34:56 Set A/D channel type result=40
05:34:56 Set A/D encoding result=40
05:34:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:34:56 Set channel filter=0.000000e+000  result=40
05:34:56 Config A/D  Result=40
05:34:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:34:56 Get A/D filter: -9.255963e+061  result=40
05:34:56 Get A/D value=-858993460  result=40
05:34:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:34:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:34:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:34:56 Aux=
05:34:56 Message to Camera, serial 183337 queued
05:35:33 Received message from Master: op=PointingHead serial=183350
05:35:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:35:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:35:34 Point started: ret=0
05:35:34 point_skyscan result=0
05:35:34 Check angles
05:35:34 SkyScan query
05:35:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:35:35 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:35:35 Message to Master queued w/err=0: serial=183350 error=0
05:35:40 Received message from Master: op=Filter serial=183351
05:35:40 Color wheel filter change from 0 to 0
05:35:40 FLIGetFilterPos err=0  currentPosition=0
05:35:40 FLIGetStepsRemaining err=0  RemainingSteps=0
05:35:40 Filter is already there-color wheel unchanged
05:35:40 Received message from Master: op=Shutter serial=183352
05:35:40 Shutter LASER close
05:35:40 Received message from Camera: op=State serial=183354
05:35:40 GetSingleValue result=40  Value=cccccccc
05:35:40 SkyScan query
05:35:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:35:41 Parameters OK
05:35:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:35:41 Set A/D data flow result=40
05:35:41 Set A/D channel type result=40
05:35:41 Set A/D encoding result=40
05:35:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:35:41 Set channel filter=0.000000e+000  result=40
05:35:41 Config A/D  Result=40
05:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:35:41 Get A/D filter: -9.255963e+061  result=40
05:35:41 Get A/D value=-858993460  result=40
05:35:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:35:41 Parameters OK
05:35:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:35:41 Set A/D data flow result=40
05:35:41 Set A/D channel type result=40
05:35:41 Set A/D encoding result=40
05:35:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:35:41 Set channel filter=0.000000e+000  result=40
05:35:41 Config A/D  Result=40
05:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:35:41 Get A/D filter: -9.255963e+061  result=40
05:35:41 Get A/D value=-858993460  result=40
05:35:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:35:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:35:41 Aux=
05:35:41 Message to Camera, serial 183354 queued
05:36:18 Received message from Master: op=PointingHead serial=183367
05:36:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:36:18 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:36:18 Point started: ret=0
05:36:18 point_skyscan result=0
05:36:19 Check angles
05:36:19 SkyScan query
05:36:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.25<-13550  Statuses=0008 0009
05:36:19 Msec=0  True Az=112.995  Ze=-23.25  Az status=0008  Ze status=0009
05:36:20 Check angles
05:36:20 SkyScan query
05:36:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.22<-14948  Statuses=0008 0009
05:36:20 Msec=750  True Az=112.995  Ze=-44.22  Az status=0008  Ze status=0009
05:36:20 Check angles
05:36:20 SkyScan query
05:36:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.175<-16345  Statuses=0008 0009
05:36:21 Msec=1500  True Az=112.995  Ze=-65.175  Az status=0008  Ze status=0009
05:36:21 Check angles
05:36:21 SkyScan query
05:36:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.13<-17742  Statuses=0008 0009
05:36:22 Msec=2250  True Az=112.995  Ze=-86.13  Az status=0008  Ze status=0009
05:36:22 Check angles
05:36:22 SkyScan query
05:36:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.07<-19138  Statuses=0008 0009
05:36:22 Msec=3000  True Az=112.995  Ze=-107.07  Az status=0008  Ze status=0009
05:36:23 Check angles
05:36:23 SkyScan query
05:36:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.025<-20535  Statuses=0008 0009
05:36:23 Msec=3750  True Az=112.995  Ze=-128.025  Az status=0008  Ze status=0009
05:36:23 Check angles
05:36:23 SkyScan query
05:36:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.01<-21934  Statuses=0008 0009
05:36:24 Msec=4500  True Az=112.995  Ze=-149.01  Az status=0008  Ze status=0009
05:36:24 Check angles
05:36:24 SkyScan query
05:36:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.935<-23329  Statuses=0008 0009
05:36:25 Msec=5250  True Az=112.995  Ze=-169.935  Az status=0008  Ze status=0009
05:36:25 Check angles
05:36:25 SkyScan query
05:36:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:36:25 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:36:25 Message to Master queued w/err=0: serial=183367 error=0
05:36:30 Received message from Master: op=Filter serial=183368
05:36:30 Color wheel filter change from 0 to 0
05:36:30 FLIGetFilterPos err=0  currentPosition=0
05:36:30 FLIGetStepsRemaining err=0  RemainingSteps=0
05:36:30 Filter is already there-color wheel unchanged
05:36:31 Received message from Master: op=Shutter serial=183369
05:36:31 Shutter LASER open
05:36:31 Received message from Camera: op=State serial=183371
05:36:31 GetSingleValue result=40  Value=cccccccc
05:36:31 SkyScan query
05:36:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:36:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:36:31 Parameters OK
05:36:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:36:31 Set A/D data flow result=40
05:36:31 Set A/D channel type result=40
05:36:31 Set A/D encoding result=40
05:36:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:36:31 Set channel filter=0.000000e+000  result=40
05:36:31 Config A/D  Result=40
05:36:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:36:31 Get A/D filter: -9.255963e+061  result=40
05:36:31 Get A/D value=-858993460  result=40
05:36:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:36:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:36:31 Parameters OK
05:36:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:36:31 Set A/D data flow result=40
05:36:31 Set A/D channel type result=40
05:36:31 Set A/D encoding result=40
05:36:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:36:31 Set channel filter=0.000000e+000  result=40
05:36:31 Config A/D  Result=40
05:36:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:36:31 Get A/D filter: -9.255963e+061  result=40
05:36:31 Get A/D value=-858993460  result=40
05:36:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:36:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:36:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:36:31 Aux=
05:36:31 Message to Camera, serial 183371 queued
05:36:40 Received message from Master: op=Shutter serial=183381
05:36:40 Shutter LASER close
05:36:40 Received message from Master: op=PointingHead serial=183385
05:36:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:36:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:36:41 Point started: ret=0
05:36:41 point_skyscan result=0
05:36:41 Check angles
05:36:41 SkyScan query
05:36:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.085<-21539  Statuses=0008 0009
05:36:42 Msec=0  True Az=112.995  Ze=-143.085  Az status=0008  Ze status=0009
05:36:42 Check angles
05:36:42 SkyScan query
05:36:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.68<-20112  Statuses=0008 0009
05:36:43 Msec=750  True Az=112.995  Ze=-121.68  Az status=0008  Ze status=0009
05:36:43 Check angles
05:36:43 SkyScan query
05:36:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
05:36:44 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
05:36:44 Check angles
05:36:44 SkyScan query
05:36:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.785<-17319  Statuses=0008 0009
05:36:44 Msec=2250  True Az=112.995  Ze=-79.785  Az status=0008  Ze status=0009
05:36:44 Check angles
05:36:44 SkyScan query
05:36:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.365<-15891  Statuses=0008 0009
05:36:45 Msec=3000  True Az=112.995  Ze=-58.365  Az status=0008  Ze status=0009
05:36:45 Check angles
05:36:45 SkyScan query
05:36:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.44<-14496  Statuses=0008 0009
05:36:46 Msec=3750  True Az=112.995  Ze=-37.44  Az status=0008  Ze status=0009
05:36:46 Check angles
05:36:46 SkyScan query
05:36:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.455<-13097  Statuses=0008 0009
05:36:47 Msec=4500  True Az=112.995  Ze=-16.455  Az status=0008  Ze status=0009
05:36:47 Check angles
05:36:47 SkyScan query
05:36:47 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
05:36:47 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
05:36:47 Check angles
05:36:47 SkyScan query
05:36:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:36:48 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:36:48 Message to Master queued w/err=0: serial=183385 error=0
05:36:53 Received message from Master: op=Filter serial=183386
05:36:53 Color wheel filter change from 0 to 0
05:36:53 FLIGetFilterPos err=0  currentPosition=0
05:36:53 FLIGetStepsRemaining err=0  RemainingSteps=0
05:36:53 Filter is already there-color wheel unchanged
05:36:53 Received message from Master: op=Shutter serial=183387
05:36:53 Shutter LASER close
05:36:53 Received message from Camera: op=State serial=183389
05:36:53 GetSingleValue result=40  Value=cccccccc
05:36:53 SkyScan query
05:36:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:36:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:36:54 Parameters OK
05:36:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:36:54 Set A/D data flow result=40
05:36:54 Set A/D channel type result=40
05:36:54 Set A/D encoding result=40
05:36:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:36:54 Set channel filter=0.000000e+000  result=40
05:36:54 Config A/D  Result=40
05:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:36:54 Get A/D filter: -9.255963e+061  result=40
05:36:54 Get A/D value=-858993460  result=40
05:36:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:36:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:36:54 Parameters OK
05:36:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:36:54 Set A/D data flow result=40
05:36:54 Set A/D channel type result=40
05:36:54 Set A/D encoding result=40
05:36:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:36:54 Set channel filter=0.000000e+000  result=40
05:36:54 Config A/D  Result=40
05:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:36:54 Get A/D filter: -9.255963e+061  result=40
05:36:54 Get A/D value=-858993460  result=40
05:36:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:36:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:36:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:36:54 Aux=
05:36:54 Message to Camera, serial 183389 queued
05:37:31 Received message from Master: op=PointingHead serial=183402
05:37:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:37:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:37:31 Point started: ret=0
05:37:31 point_skyscan result=0
05:37:32 Check angles
05:37:32 SkyScan query
05:37:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:37:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:37:32 Message to Master queued w/err=0: serial=183402 error=0
05:37:37 Received message from Master: op=Filter serial=183403
05:37:37 Color wheel filter change from 0 to 0
05:37:37 FLIGetFilterPos err=0  currentPosition=0
05:37:37 FLIGetStepsRemaining err=0  RemainingSteps=0
05:37:37 Filter is already there-color wheel unchanged
05:37:38 Received message from Master: op=Shutter serial=183404
05:37:38 Shutter LASER close
05:37:38 Received message from Camera: op=State serial=183406
05:37:38 GetSingleValue result=40  Value=cccccccc
05:37:38 SkyScan query
05:37:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:37:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:37:38 Parameters OK
05:37:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:37:38 Set A/D data flow result=40
05:37:38 Set A/D channel type result=40
05:37:38 Set A/D encoding result=40
05:37:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:37:38 Set channel filter=0.000000e+000  result=40
05:37:38 Config A/D  Result=40
05:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:37:38 Get A/D filter: -9.255963e+061  result=40
05:37:38 Get A/D value=-858993460  result=40
05:37:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:37:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:37:38 Parameters OK
05:37:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:37:38 Set A/D data flow result=40
05:37:38 Set A/D channel type result=40
05:37:38 Set A/D encoding result=40
05:37:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:37:38 Set channel filter=0.000000e+000  result=40
05:37:38 Config A/D  Result=40
05:37:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:37:38 Get A/D filter: -9.255963e+061  result=40
05:37:38 Get A/D value=-858993460  result=40
05:37:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:37:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:37:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:37:38 Aux=
05:37:38 Message to Camera, serial 183406 queued
05:38:15 Received message from Master: op=PointingHead serial=183419
05:38:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:38:15 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:38:15 Point started: ret=0
05:38:15 point_skyscan result=0
05:38:16 Check angles
05:38:16 SkyScan query
05:38:17 SkyScan query done: ret=0  az=136.44<-9096  ze=-6.51<-12434  Statuses=0009 0008
05:38:17 Msec=0  True Az=136.44  Ze=-6.51  Az status=0009  Ze status=0008
05:38:17 Check angles
05:38:17 SkyScan query
05:38:18 SkyScan query done: ret=0  az=153.885<-10259  ze=-6.495<-12433  Statuses=0009 0008
05:38:18 Msec=750  True Az=153.885  Ze=-6.495  Az status=0009  Ze status=0008
05:38:18 Check angles
05:38:18 SkyScan query
05:38:18 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
05:38:18 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
05:38:18 Check angles
05:38:18 SkyScan query
05:38:19 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:38:19 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:38:19 Message to Master queued w/err=0: serial=183419 error=0
05:38:24 Received message from Master: op=Filter serial=183420
05:38:24 Color wheel filter change from 0 to 0
05:38:24 FLIGetFilterPos err=0  currentPosition=0
05:38:24 FLIGetStepsRemaining err=0  RemainingSteps=0
05:38:24 Filter is already there-color wheel unchanged
05:38:24 Received message from Master: op=Shutter serial=183421
05:38:24 Shutter LASER close
05:38:24 Received message from Camera: op=State serial=183423
05:38:24 GetSingleValue result=40  Value=cccccccc
05:38:24 SkyScan query
05:38:25 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:38:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:38:25 Parameters OK
05:38:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:38:25 Set A/D data flow result=40
05:38:25 Set A/D channel type result=40
05:38:25 Set A/D encoding result=40
05:38:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:38:25 Set channel filter=0.000000e+000  result=40
05:38:25 Config A/D  Result=40
05:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:38:25 Get A/D filter: -9.255963e+061  result=40
05:38:25 Get A/D value=-858993460  result=40
05:38:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:38:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:38:25 Parameters OK
05:38:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:38:25 Set A/D data flow result=40
05:38:25 Set A/D channel type result=40
05:38:25 Set A/D encoding result=40
05:38:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:38:25 Set channel filter=0.000000e+000  result=40
05:38:25 Config A/D  Result=40
05:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:38:25 Get A/D filter: -9.255963e+061  result=40
05:38:25 Get A/D value=-858993460  result=40
05:38:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:38:25 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:38:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:38:25 Aux=
05:38:25 Message to Camera, serial 183423 queued
05:39:02 Received message from Master: op=PointingHead serial=183436
05:39:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:39:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:39:02 Point started: ret=0
05:39:02 point_skyscan result=0
05:39:03 Check angles
05:39:03 SkyScan query
05:39:03 SkyScan query done: ret=0  az=153.135<-10209  ze=6.51<-11566  Statuses=0009 0008
05:39:03 Msec=0  True Az=153.135  Ze=6.51  Az status=0009  Ze status=0008
05:39:04 Check angles
05:39:04 SkyScan query
05:39:04 SkyScan query done: ret=0  az=135.63<-9042  ze=6.495<-11567  Statuses=0009 0008
05:39:04 Msec=750  True Az=135.63  Ze=6.495  Az status=0009  Ze status=0008
05:39:04 Check angles
05:39:04 SkyScan query
05:39:05 SkyScan query done: ret=0  az=118.17<-7878  ze=6.495<-11567  Statuses=0009 0008
05:39:05 Msec=1500  True Az=118.17  Ze=6.495  Az status=0009  Ze status=0008
05:39:05 Check angles
05:39:05 SkyScan query
05:39:06 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
05:39:06 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
05:39:06 Message to Master queued w/err=0: serial=183436 error=0
05:39:11 Received message from Master: op=Filter serial=183437
05:39:11 Color wheel filter change from 0 to 0
05:39:11 FLIGetFilterPos err=0  currentPosition=0
05:39:11 FLIGetStepsRemaining err=0  RemainingSteps=0
05:39:11 Filter is already there-color wheel unchanged
05:39:11 Received message from Master: op=Shutter serial=183438
05:39:11 Shutter LASER close
05:39:11 Received message from Camera: op=State serial=183440
05:39:11 GetSingleValue result=40  Value=cccccccc
05:39:11 SkyScan query
05:39:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:39:11 Parameters OK
05:39:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:39:11 Set A/D data flow result=40
05:39:11 Set A/D channel type result=40
05:39:11 Set A/D encoding result=40
05:39:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:39:11 Set channel filter=0.000000e+000  result=40
05:39:11 Config A/D  Result=40
05:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:39:11 Get A/D filter: -9.255963e+061  result=40
05:39:11 Get A/D value=-858993460  result=40
05:39:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:39:11 Parameters OK
05:39:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:39:11 Set A/D data flow result=40
05:39:11 Set A/D channel type result=40
05:39:11 Set A/D encoding result=40
05:39:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:39:11 Set channel filter=0.000000e+000  result=40
05:39:11 Config A/D  Result=40
05:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:39:11 Get A/D filter: -9.255963e+061  result=40
05:39:11 Get A/D value=-858993460  result=40
05:39:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:39:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:39:11 Aux=
05:39:11 Message to Camera, serial 183440 queued
05:39:47 Received message from Master: op=PointingHead serial=183452
05:39:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:39:47 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:39:48 Point started: ret=0
05:39:48 point_skyscan result=0
05:39:48 Check angles
05:39:48 SkyScan query
05:39:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
05:39:49 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
05:39:49 Check angles
05:39:49 SkyScan query
05:39:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.37<-14958  Statuses=0008 0009
05:39:50 Msec=750  True Az=112.995  Ze=-44.37  Az status=0008  Ze status=0009
05:39:50 Check angles
05:39:50 SkyScan query
05:39:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
05:39:50 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
05:39:51 Check angles
05:39:51 SkyScan query
05:39:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
05:39:51 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
05:39:51 Check angles
05:39:51 SkyScan query
05:39:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.09<-19206  Statuses=0008 0009
05:39:52 Msec=3000  True Az=112.995  Ze=-108.09  Az status=0008  Ze status=0009
05:39:52 Check angles
05:39:52 SkyScan query
05:39:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.495<-20633  Statuses=0008 0009
05:39:53 Msec=3750  True Az=112.995  Ze=-129.495  Az status=0008  Ze status=0009
05:39:53 Check angles
05:39:53 SkyScan query
05:39:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.45<-22030  Statuses=0008 0009
05:39:54 Msec=4500  True Az=112.995  Ze=-150.45  Az status=0008  Ze status=0009
05:39:54 Check angles
05:39:54 SkyScan query
05:39:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.195<-23413  Statuses=0008 0009
05:39:54 Msec=5250  True Az=112.995  Ze=-171.195  Az status=0008  Ze status=0009
05:39:54 Check angles
05:39:54 SkyScan query
05:39:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:39:55 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:39:55 Message to Master queued w/err=0: serial=183452 error=0
05:40:00 Received message from Master: op=Filter serial=183453
05:40:00 Color wheel filter change from 0 to 0
05:40:00 FLIGetFilterPos err=0  currentPosition=0
05:40:00 FLIGetStepsRemaining err=0  RemainingSteps=0
05:40:00 Filter is already there-color wheel unchanged
05:40:00 Received message from Master: op=Shutter serial=183454
05:40:00 Shutter LASER open
05:40:00 Received message from Camera: op=State serial=183456
05:40:00 GetSingleValue result=40  Value=cccccccc
05:40:00 SkyScan query
05:40:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:40:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:01 Parameters OK
05:40:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:01 Set A/D data flow result=40
05:40:01 Set A/D channel type result=40
05:40:01 Set A/D encoding result=40
05:40:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:01 Set channel filter=0.000000e+000  result=40
05:40:01 Config A/D  Result=40
05:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:01 Get A/D filter: -9.255963e+061  result=40
05:40:01 Get A/D value=-858993460  result=40
05:40:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:01 Parameters OK
05:40:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:01 Set A/D data flow result=40
05:40:01 Set A/D channel type result=40
05:40:01 Set A/D encoding result=40
05:40:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:01 Set channel filter=0.000000e+000  result=40
05:40:01 Config A/D  Result=40
05:40:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:01 Get A/D filter: -9.255963e+061  result=40
05:40:01 Get A/D value=-858993460  result=40
05:40:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:40:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:40:01 Aux=
05:40:01 Message to Camera, serial 183456 queued
05:40:09 Received message from Master: op=Shutter serial=183466
05:40:09 Shutter LASER close
05:40:10 Received message from Master: op=PointingHead serial=183470
05:40:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:40:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:40:10 Point started: ret=0
05:40:10 point_skyscan result=0
05:40:11 Check angles
05:40:11 SkyScan query
05:40:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.995<-21533  Statuses=0008 0009
05:40:11 Msec=0  True Az=112.995  Ze=-142.995  Az status=0008  Ze status=0009
05:40:12 Check angles
05:40:12 SkyScan query
05:40:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.605<-20107  Statuses=0008 0009
05:40:12 Msec=750  True Az=112.995  Ze=-121.605  Az status=0008  Ze status=0009
05:40:12 Check angles
05:40:12 SkyScan query
05:40:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.65<-18710  Statuses=0008 0009
05:40:13 Msec=1500  True Az=112.995  Ze=-100.65  Az status=0008  Ze status=0009
05:40:13 Check angles
05:40:13 SkyScan query
05:40:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.71<-17314  Statuses=0008 0009
05:40:14 Msec=2250  True Az=112.995  Ze=-79.71  Az status=0008  Ze status=0009
05:40:14 Check angles
05:40:14 SkyScan query
05:40:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.29<-15886  Statuses=0008 0009
05:40:14 Msec=3000  True Az=112.995  Ze=-58.29  Az status=0008  Ze status=0009
05:40:15 Check angles
05:40:15 SkyScan query
05:40:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.915<-14461  Statuses=0008 0009
05:40:15 Msec=3750  True Az=112.995  Ze=-36.915  Az status=0008  Ze status=0009
05:40:15 Check angles
05:40:15 SkyScan query
05:40:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.945<-13063  Statuses=0008 0009
05:40:16 Msec=4500  True Az=112.995  Ze=-15.945  Az status=0008  Ze status=0009
05:40:16 Check angles
05:40:16 SkyScan query
05:40:17 SkyScan query done: ret=0  az=112.995<-7533  ze=5.1<-11660  Statuses=0008 0009
05:40:17 Msec=5250  True Az=112.995  Ze=5.1  Az status=0008  Ze status=0009
05:40:17 Check angles
05:40:17 SkyScan query
05:40:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:40:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:40:18 Message to Master queued w/err=0: serial=183470 error=0
05:40:23 Received message from Master: op=Filter serial=183471
05:40:23 Color wheel filter change from 0 to 0
05:40:23 FLIGetFilterPos err=0  currentPosition=0
05:40:23 FLIGetStepsRemaining err=0  RemainingSteps=0
05:40:23 Filter is already there-color wheel unchanged
05:40:23 Received message from Master: op=Shutter serial=183472
05:40:23 Shutter LASER close
05:40:23 Received message from Camera: op=State serial=183474
05:40:23 GetSingleValue result=40  Value=cccccccc
05:40:23 SkyScan query
05:40:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:40:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:23 Parameters OK
05:40:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:23 Set A/D data flow result=40
05:40:23 Set A/D channel type result=40
05:40:23 Set A/D encoding result=40
05:40:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:23 Set channel filter=0.000000e+000  result=40
05:40:23 Config A/D  Result=40
05:40:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:23 Get A/D filter: -9.255963e+061  result=40
05:40:23 Get A/D value=-858993460  result=40
05:40:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:40:23 Parameters OK
05:40:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:40:23 Set A/D data flow result=40
05:40:23 Set A/D channel type result=40
05:40:23 Set A/D encoding result=40
05:40:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:40:23 Set channel filter=0.000000e+000  result=40
05:40:23 Config A/D  Result=40
05:40:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:40:23 Get A/D filter: -9.255963e+061  result=40
05:40:23 Get A/D value=-858993460  result=40
05:40:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:40:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:40:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:40:23 Aux=
05:40:23 Message to Camera, serial 183474 queued
05:41:00 Received message from Master: op=PointingHead serial=183487
05:41:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:41:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:41:01 Point started: ret=0
05:41:01 point_skyscan result=0
05:41:01 Check angles
05:41:01 SkyScan query
05:41:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:41:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:41:02 Message to Master queued w/err=0: serial=183487 error=0
05:41:07 Received message from Master: op=Filter serial=183488
05:41:07 Color wheel filter change from 0 to 0
05:41:07 FLIGetFilterPos err=0  currentPosition=0
05:41:07 FLIGetStepsRemaining err=0  RemainingSteps=0
05:41:07 Filter is already there-color wheel unchanged
05:41:07 Received message from Master: op=Shutter serial=183489
05:41:07 Shutter LASER close
05:41:07 Received message from Camera: op=State serial=183491
05:41:07 GetSingleValue result=40  Value=cccccccc
05:41:07 SkyScan query
05:41:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:41:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:41:08 Parameters OK
05:41:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:41:08 Set A/D data flow result=40
05:41:08 Set A/D channel type result=40
05:41:08 Set A/D encoding result=40
05:41:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:41:08 Set channel filter=0.000000e+000  result=40
05:41:08 Config A/D  Result=40
05:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:41:08 Get A/D filter: -9.255963e+061  result=40
05:41:08 Get A/D value=-858993460  result=40
05:41:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:41:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:41:08 Parameters OK
05:41:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:41:08 Set A/D data flow result=40
05:41:08 Set A/D channel type result=40
05:41:08 Set A/D encoding result=40
05:41:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:41:08 Set channel filter=0.000000e+000  result=40
05:41:08 Config A/D  Result=40
05:41:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:41:08 Get A/D filter: -9.255963e+061  result=40
05:41:08 Get A/D value=-858993460  result=40
05:41:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:41:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:41:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:41:08 Aux=
05:41:08 Message to Camera, serial 183491 queued
05:41:45 Received message from Master: op=PointingHead serial=183504
05:41:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:41:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:41:45 Point started: ret=0
05:41:45 point_skyscan result=0
05:41:46 Check angles
05:41:46 SkyScan query
05:41:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:41:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:41:46 Message to Master queued w/err=0: serial=183504 error=0
05:41:51 Received message from Master: op=Filter serial=183505
05:41:51 Color wheel filter change from 0 to 0
05:41:51 FLIGetFilterPos err=0  currentPosition=0
05:41:51 FLIGetStepsRemaining err=0  RemainingSteps=0
05:41:51 Filter is already there-color wheel unchanged
05:41:52 Received message from Master: op=Shutter serial=183506
05:41:52 Shutter LASER close
05:41:52 Received message from Camera: op=State serial=183508
05:41:52 GetSingleValue result=40  Value=cccccccc
05:41:52 SkyScan query
05:41:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:41:52 Parameters OK
05:41:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:41:52 Set A/D data flow result=40
05:41:52 Set A/D channel type result=40
05:41:52 Set A/D encoding result=40
05:41:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:41:52 Set channel filter=0.000000e+000  result=40
05:41:52 Config A/D  Result=40
05:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:41:52 Get A/D filter: -9.255963e+061  result=40
05:41:52 Get A/D value=-858993460  result=40
05:41:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:41:52 Parameters OK
05:41:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:41:52 Set A/D data flow result=40
05:41:52 Set A/D channel type result=40
05:41:52 Set A/D encoding result=40
05:41:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:41:52 Set channel filter=0.000000e+000  result=40
05:41:52 Config A/D  Result=40
05:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:41:52 Get A/D filter: -9.255963e+061  result=40
05:41:52 Get A/D value=-858993460  result=40
05:41:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:41:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:41:52 Aux=
05:41:52 Message to Camera, serial 183508 queued
05:42:29 Received message from Master: op=PointingHead serial=183521
05:42:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:42:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:42:29 Point started: ret=0
05:42:29 point_skyscan result=0
05:42:30 Check angles
05:42:30 SkyScan query
05:42:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:42:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:42:31 Message to Master queued w/err=0: serial=183521 error=0
05:42:36 Received message from Master: op=Filter serial=183522
05:42:36 Color wheel filter change from 0 to 0
05:42:36 FLIGetFilterPos err=0  currentPosition=0
05:42:36 FLIGetStepsRemaining err=0  RemainingSteps=0
05:42:36 Filter is already there-color wheel unchanged
05:42:36 Received message from Master: op=Shutter serial=183523
05:42:36 Shutter LASER close
05:42:36 Received message from Camera: op=State serial=183525
05:42:36 GetSingleValue result=40  Value=cccccccc
05:42:36 SkyScan query
05:42:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:42:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:42:36 Parameters OK
05:42:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:42:36 Set A/D data flow result=40
05:42:36 Set A/D channel type result=40
05:42:36 Set A/D encoding result=40
05:42:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:42:36 Set channel filter=0.000000e+000  result=40
05:42:36 Config A/D  Result=40
05:42:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:42:36 Get A/D filter: -9.255963e+061  result=40
05:42:36 Get A/D value=-858993460  result=40
05:42:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:42:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:42:36 Parameters OK
05:42:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:42:36 Set A/D data flow result=40
05:42:36 Set A/D channel type result=40
05:42:36 Set A/D encoding result=40
05:42:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:42:36 Set channel filter=0.000000e+000  result=40
05:42:36 Config A/D  Result=40
05:42:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:42:36 Get A/D filter: -9.255963e+061  result=40
05:42:36 Get A/D value=-858993460  result=40
05:42:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:42:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:42:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:42:36 Aux=
05:42:36 Message to Camera, serial 183525 queued
05:43:13 Received message from Master: op=PointingHead serial=183538
05:43:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:43:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:43:14 Point started: ret=0
05:43:14 point_skyscan result=0
05:43:14 Check angles
05:43:14 SkyScan query
05:43:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
05:43:15 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
05:43:15 Check angles
05:43:15 SkyScan query
05:43:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.775<-14985  Statuses=0008 0009
05:43:16 Msec=750  True Az=112.995  Ze=-44.775  Az status=0008  Ze status=0009
05:43:16 Check angles
05:43:16 SkyScan query
05:43:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.165<-16411  Statuses=0008 0009
05:43:17 Msec=1500  True Az=112.995  Ze=-66.165  Az status=0008  Ze status=0009
05:43:17 Check angles
05:43:17 SkyScan query
05:43:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.105<-17807  Statuses=0008 0009
05:43:17 Msec=2250  True Az=112.995  Ze=-87.105  Az status=0008  Ze status=0009
05:43:17 Check angles
05:43:17 SkyScan query
05:43:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.06<-19204  Statuses=0008 0009
05:43:18 Msec=3000  True Az=112.995  Ze=-108.06  Az status=0008  Ze status=0009
05:43:18 Check angles
05:43:18 SkyScan query
05:43:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-129<-20600  Statuses=0008 0009
05:43:19 Msec=3750  True Az=112.995  Ze=-129  Az status=0008  Ze status=0009
05:43:19 Check angles
05:43:19 SkyScan query
05:43:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.955<-21997  Statuses=0008 0009
05:43:20 Msec=4500  True Az=112.995  Ze=-149.955  Az status=0008  Ze status=0009
05:43:20 Check angles
05:43:20 SkyScan query
05:43:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
05:43:20 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
05:43:20 Check angles
05:43:20 SkyScan query
05:43:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:43:21 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:43:21 Message to Master queued w/err=0: serial=183538 error=0
05:43:26 Received message from Master: op=Filter serial=183539
05:43:26 Color wheel filter change from 0 to 0
05:43:26 FLIGetFilterPos err=0  currentPosition=0
05:43:26 FLIGetStepsRemaining err=0  RemainingSteps=0
05:43:26 Filter is already there-color wheel unchanged
05:43:26 Received message from Master: op=Shutter serial=183540
05:43:26 Shutter LASER open
05:43:26 Received message from Camera: op=State serial=183542
05:43:26 GetSingleValue result=40  Value=cccccccc
05:43:26 SkyScan query
05:43:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:43:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:27 Parameters OK
05:43:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:27 Set A/D data flow result=40
05:43:27 Set A/D channel type result=40
05:43:27 Set A/D encoding result=40
05:43:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:27 Set channel filter=0.000000e+000  result=40
05:43:27 Config A/D  Result=40
05:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:27 Get A/D filter: -9.255963e+061  result=40
05:43:27 Get A/D value=-858993460  result=40
05:43:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:27 Parameters OK
05:43:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:27 Set A/D data flow result=40
05:43:27 Set A/D channel type result=40
05:43:27 Set A/D encoding result=40
05:43:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:27 Set channel filter=0.000000e+000  result=40
05:43:27 Config A/D  Result=40
05:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:27 Get A/D filter: -9.255963e+061  result=40
05:43:27 Get A/D value=-858993460  result=40
05:43:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:43:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:43:27 Aux=
05:43:27 Message to Camera, serial 183542 queued
05:43:35 Received message from Master: op=Shutter serial=183552
05:43:35 Shutter LASER close
05:43:36 Received message from Master: op=PointingHead serial=183556
05:43:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:43:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:43:36 Point started: ret=0
05:43:36 point_skyscan result=0
05:43:37 Check angles
05:43:37 SkyScan query
05:43:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.935<-21529  Statuses=0008 0009
05:43:38 Msec=0  True Az=112.995  Ze=-142.935  Az status=0008  Ze status=0009
05:43:38 Check angles
05:43:38 SkyScan query
05:43:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.53<-20102  Statuses=0008 0009
05:43:38 Msec=750  True Az=112.995  Ze=-121.53  Az status=0008  Ze status=0009
05:43:39 Check angles
05:43:39 SkyScan query
05:43:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.59<-18706  Statuses=0008 0009
05:43:39 Msec=1500  True Az=112.995  Ze=-100.59  Az status=0008  Ze status=0009
05:43:39 Check angles
05:43:39 SkyScan query
05:43:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.635<-17309  Statuses=0008 0009
05:43:40 Msec=2250  True Az=112.995  Ze=-79.635  Az status=0008  Ze status=0009
05:43:40 Check angles
05:43:40 SkyScan query
05:43:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.68<-15912  Statuses=0008 0009
05:43:41 Msec=3000  True Az=112.995  Ze=-58.68  Az status=0008  Ze status=0009
05:43:41 Check angles
05:43:41 SkyScan query
05:43:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.29<-14486  Statuses=0008 0009
05:43:41 Msec=3750  True Az=112.995  Ze=-37.29  Az status=0008  Ze status=0009
05:43:42 Check angles
05:43:42 SkyScan query
05:43:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.305<-13087  Statuses=0008 0009
05:43:42 Msec=4500  True Az=112.995  Ze=-16.305  Az status=0008  Ze status=0009
05:43:42 Check angles
05:43:42 SkyScan query
05:43:43 SkyScan query done: ret=0  az=112.995<-7533  ze=4.515<-11699  Statuses=0008 0009
05:43:43 Msec=5250  True Az=112.995  Ze=4.515  Az status=0008  Ze status=0009
05:43:43 Check angles
05:43:43 SkyScan query
05:43:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:43:44 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:43:44 Message to Master queued w/err=0: serial=183556 error=0
[UTC 2019-3-9  05:43:48]
05:43:49 Received message from Master: op=Filter serial=183557
05:43:49 Color wheel filter change from 0 to 0
05:43:49 FLIGetFilterPos err=0  currentPosition=0
05:43:49 FLIGetStepsRemaining err=0  RemainingSteps=0
05:43:49 Filter is already there-color wheel unchanged
05:43:49 Received message from Master: op=Shutter serial=183558
05:43:49 Shutter LASER close
05:43:49 Received message from Camera: op=State serial=183560
05:43:49 GetSingleValue result=40  Value=cccccccc
05:43:49 SkyScan query
05:43:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:43:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:50 Parameters OK
05:43:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:50 Set A/D data flow result=40
05:43:50 Set A/D channel type result=40
05:43:50 Set A/D encoding result=40
05:43:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:50 Set channel filter=0.000000e+000  result=40
05:43:50 Config A/D  Result=40
05:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:50 Get A/D filter: -9.255963e+061  result=40
05:43:50 Get A/D value=-858993460  result=40
05:43:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:43:50 Parameters OK
05:43:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:43:50 Set A/D data flow result=40
05:43:50 Set A/D channel type result=40
05:43:50 Set A/D encoding result=40
05:43:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:43:50 Set channel filter=0.000000e+000  result=40
05:43:50 Config A/D  Result=40
05:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:43:50 Get A/D filter: -9.255963e+061  result=40
05:43:50 Get A/D value=-858993460  result=40
05:43:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:43:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:43:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:43:50 Aux=
05:43:50 Message to Camera, serial 183560 queued
05:44:27 Received message from Master: op=PointingHead serial=183573
05:44:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:44:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:44:27 Point started: ret=0
05:44:27 point_skyscan result=0
05:44:28 Check angles
05:44:28 SkyScan query
05:44:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:44:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:44:28 Message to Master queued w/err=0: serial=183573 error=0
05:44:33 Received message from Master: op=Filter serial=183574
05:44:33 Color wheel filter change from 0 to 0
05:44:33 FLIGetFilterPos err=0  currentPosition=0
05:44:33 FLIGetStepsRemaining err=0  RemainingSteps=0
05:44:33 Filter is already there-color wheel unchanged
05:44:33 Received message from Master: op=Shutter serial=183575
05:44:33 Shutter LASER close
05:44:33 Received message from Camera: op=State serial=183577
05:44:33 GetSingleValue result=40  Value=cccccccc
05:44:33 SkyScan query
05:44:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:44:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:44:34 Parameters OK
05:44:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:44:34 Set A/D data flow result=40
05:44:34 Set A/D channel type result=40
05:44:34 Set A/D encoding result=40
05:44:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:44:34 Set channel filter=0.000000e+000  result=40
05:44:34 Config A/D  Result=40
05:44:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:44:34 Get A/D filter: -9.255963e+061  result=40
05:44:34 Get A/D value=-858993460  result=40
05:44:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:44:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:44:34 Parameters OK
05:44:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:44:34 Set A/D data flow result=40
05:44:34 Set A/D channel type result=40
05:44:34 Set A/D encoding result=40
05:44:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:44:34 Set channel filter=0.000000e+000  result=40
05:44:34 Config A/D  Result=40
05:44:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:44:34 Get A/D filter: -9.255963e+061  result=40
05:44:34 Get A/D value=-858993460  result=40
05:44:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:44:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:44:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:44:34 Aux=
05:44:34 Message to Camera, serial 183577 queued
05:45:11 Received message from Master: op=PointingHead serial=183590
05:45:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:45:11 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:45:11 Point started: ret=0
05:45:11 point_skyscan result=0
05:45:12 Check angles
05:45:12 SkyScan query
05:45:13 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
05:45:13 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
05:45:13 Check angles
05:45:13 SkyScan query
05:45:13 SkyScan query done: ret=0  az=153.675<-10245  ze=-6.495<-12433  Statuses=0009 0008
05:45:13 Msec=750  True Az=153.675  Ze=-6.495  Az status=0009  Ze status=0008
05:45:13 Check angles
05:45:13 SkyScan query
05:45:14 SkyScan query done: ret=0  az=171.045<-11403  ze=-6.495<-12433  Statuses=0009 0008
05:45:14 Msec=1500  True Az=171.045  Ze=-6.495  Az status=0009  Ze status=0008
05:45:14 Check angles
05:45:14 SkyScan query
05:45:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:45:15 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:45:15 Message to Master queued w/err=0: serial=183590 error=0
05:45:20 Received message from Master: op=Filter serial=183591
05:45:20 Color wheel filter change from 0 to 0
05:45:20 FLIGetFilterPos err=0  currentPosition=0
05:45:20 FLIGetStepsRemaining err=0  RemainingSteps=0
05:45:20 Filter is already there-color wheel unchanged
05:45:20 Received message from Master: op=Shutter serial=183592
05:45:20 Shutter LASER close
05:45:20 Received message from Camera: op=State serial=183594
05:45:20 GetSingleValue result=40  Value=cccccccc
05:45:20 SkyScan query
05:45:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:45:21 Parameters OK
05:45:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:45:21 Set A/D data flow result=40
05:45:21 Set A/D channel type result=40
05:45:21 Set A/D encoding result=40
05:45:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:45:21 Set channel filter=0.000000e+000  result=40
05:45:21 Config A/D  Result=40
05:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:45:21 Get A/D filter: -9.255963e+061  result=40
05:45:21 Get A/D value=-858993460  result=40
05:45:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:45:21 Parameters OK
05:45:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:45:21 Set A/D data flow result=40
05:45:21 Set A/D channel type result=40
05:45:21 Set A/D encoding result=40
05:45:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:45:21 Set channel filter=0.000000e+000  result=40
05:45:21 Config A/D  Result=40
05:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:45:21 Get A/D filter: -9.255963e+061  result=40
05:45:21 Get A/D value=-858993460  result=40
05:45:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:45:21 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:45:21 Aux=
05:45:21 Message to Camera, serial 183594 queued
05:45:57 Received message from Master: op=PointingHead serial=183607
05:45:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:45:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:45:58 Point started: ret=0
05:45:58 point_skyscan result=0
05:45:58 Check angles
05:45:58 SkyScan query
05:45:59 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
05:45:59 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
05:45:59 Check angles
05:45:59 SkyScan query
05:46:00 SkyScan query done: ret=0  az=135.465<-9031  ze=6.495<-11567  Statuses=0009 0008
05:46:00 Msec=750  True Az=135.465  Ze=6.495  Az status=0009  Ze status=0008
05:46:00 Check angles
05:46:00 SkyScan query
05:46:01 SkyScan query done: ret=0  az=117.66<-7844  ze=6.495<-11567  Statuses=0009 0008
05:46:01 Msec=1500  True Az=117.66  Ze=6.495  Az status=0009  Ze status=0008
05:46:01 Check angles
05:46:01 SkyScan query
05:46:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:46:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:46:01 Message to Master queued w/err=0: serial=183607 error=0
05:46:06 Received message from Master: op=Filter serial=183608
05:46:06 Color wheel filter change from 0 to 0
05:46:06 FLIGetFilterPos err=0  currentPosition=0
05:46:06 FLIGetStepsRemaining err=0  RemainingSteps=0
05:46:06 Filter is already there-color wheel unchanged
05:46:07 Received message from Master: op=Shutter serial=183609
05:46:07 Shutter LASER close
05:46:07 Received message from Camera: op=State serial=183611
05:46:07 GetSingleValue result=40  Value=cccccccc
05:46:07 SkyScan query
05:46:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:46:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:46:07 Parameters OK
05:46:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:46:07 Set A/D data flow result=40
05:46:07 Set A/D channel type result=40
05:46:07 Set A/D encoding result=40
05:46:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:46:07 Set channel filter=0.000000e+000  result=40
05:46:07 Config A/D  Result=40
05:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:46:07 Get A/D filter: -9.255963e+061  result=40
05:46:07 Get A/D value=-858993460  result=40
05:46:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:46:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:46:07 Parameters OK
05:46:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:46:07 Set A/D data flow result=40
05:46:07 Set A/D channel type result=40
05:46:07 Set A/D encoding result=40
05:46:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:46:07 Set channel filter=0.000000e+000  result=40
05:46:07 Config A/D  Result=40
05:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:46:07 Get A/D filter: -9.255963e+061  result=40
05:46:07 Get A/D value=-858993460  result=40
05:46:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:46:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:46:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:46:07 Aux=
05:46:07 Message to Camera, serial 183611 queued
05:46:44 Received message from Master: op=PointingHead serial=183624
05:46:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:46:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:46:44 Point started: ret=0
05:46:44 point_skyscan result=0
05:46:45 Check angles
05:46:45 SkyScan query
05:46:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
05:46:46 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
05:46:46 Check angles
05:46:46 SkyScan query
05:46:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
05:46:46 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
05:46:47 Check angles
05:46:47 SkyScan query
05:46:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.835<-16389  Statuses=0008 0009
05:46:47 Msec=1500  True Az=112.995  Ze=-65.835  Az status=0008  Ze status=0009
05:46:47 Check angles
05:46:47 SkyScan query
05:46:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
05:46:48 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
05:46:48 Check angles
05:46:48 SkyScan query
05:46:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.745<-19183  Statuses=0008 0009
05:46:49 Msec=3000  True Az=112.995  Ze=-107.745  Az status=0008  Ze status=0009
05:46:49 Check angles
05:46:49 SkyScan query
05:46:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
05:46:49 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
05:46:50 Check angles
05:46:50 SkyScan query
05:46:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.64<-21976  Statuses=0008 0009
05:46:50 Msec=4500  True Az=112.995  Ze=-149.64  Az status=0008  Ze status=0009
05:46:50 Check angles
05:46:50 SkyScan query
05:46:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.925<-23395  Statuses=0008 0009
05:46:51 Msec=5250  True Az=112.995  Ze=-170.925  Az status=0008  Ze status=0009
05:46:51 Check angles
05:46:51 SkyScan query
05:46:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:46:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:46:52 Message to Master queued w/err=0: serial=183624 error=0
05:46:57 Received message from Master: op=Filter serial=183625
05:46:57 Color wheel filter change from 0 to 0
05:46:57 FLIGetFilterPos err=0  currentPosition=0
05:46:57 FLIGetStepsRemaining err=0  RemainingSteps=0
05:46:57 Filter is already there-color wheel unchanged
05:46:57 Received message from Master: op=Shutter serial=183626
05:46:57 Shutter LASER open
05:46:57 Received message from Camera: op=State serial=183628
05:46:57 GetSingleValue result=40  Value=cccccccc
05:46:57 SkyScan query
05:46:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:46:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:46:58 Parameters OK
05:46:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:46:58 Set A/D data flow result=40
05:46:58 Set A/D channel type result=40
05:46:58 Set A/D encoding result=40
05:46:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:46:58 Set channel filter=0.000000e+000  result=40
05:46:58 Config A/D  Result=40
05:46:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:46:58 Get A/D filter: -9.255963e+061  result=40
05:46:58 Get A/D value=-858993460  result=40
05:46:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:46:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:46:58 Parameters OK
05:46:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:46:58 Set A/D data flow result=40
05:46:58 Set A/D channel type result=40
05:46:58 Set A/D encoding result=40
05:46:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:46:58 Set channel filter=0.000000e+000  result=40
05:46:58 Config A/D  Result=40
05:46:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:46:58 Get A/D filter: -9.255963e+061  result=40
05:46:58 Get A/D value=-858993460  result=40
05:46:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:46:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:46:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:46:58 Aux=
05:46:58 Message to Camera, serial 183628 queued
05:47:06 Received message from Master: op=Shutter serial=183638
05:47:06 Shutter LASER close
05:47:06 Received message from Master: op=PointingHead serial=183642
05:47:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:47:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:47:07 Point started: ret=0
05:47:07 point_skyscan result=0
05:47:08 Check angles
05:47:08 SkyScan query
05:47:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.49<-21566  Statuses=0008 0009
05:47:08 Msec=0  True Az=112.995  Ze=-143.49  Az status=0008  Ze status=0009
05:47:08 Check angles
05:47:08 SkyScan query
05:47:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.55<-20170  Statuses=0008 0009
05:47:09 Msec=750  True Az=112.995  Ze=-122.55  Az status=0008  Ze status=0009
05:47:09 Check angles
05:47:09 SkyScan query
05:47:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.58<-18772  Statuses=0008 0009
05:47:10 Msec=1500  True Az=112.995  Ze=-101.58  Az status=0008  Ze status=0009
05:47:10 Check angles
05:47:10 SkyScan query
05:47:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.19<-17346  Statuses=0008 0009
05:47:10 Msec=2250  True Az=112.995  Ze=-80.19  Az status=0008  Ze status=0009
05:47:11 Check angles
05:47:11 SkyScan query
05:47:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.25<-15950  Statuses=0008 0009
05:47:11 Msec=3000  True Az=112.995  Ze=-59.25  Az status=0008  Ze status=0009
05:47:11 Check angles
05:47:11 SkyScan query
05:47:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.265<-14551  Statuses=0008 0009
05:47:12 Msec=3750  True Az=112.995  Ze=-38.265  Az status=0008  Ze status=0009
05:47:12 Check angles
05:47:12 SkyScan query
05:47:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.875<-13125  Statuses=0008 0009
05:47:13 Msec=4500  True Az=112.995  Ze=-16.875  Az status=0008  Ze status=0009
05:47:13 Check angles
05:47:13 SkyScan query
05:47:13 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
05:47:13 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
05:47:14 Check angles
05:47:14 SkyScan query
05:47:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:47:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:47:14 Message to Master queued w/err=0: serial=183642 error=0
05:47:19 Received message from Master: op=Filter serial=183643
05:47:19 Color wheel filter change from 0 to 0
05:47:19 FLIGetFilterPos err=0  currentPosition=0
05:47:19 FLIGetStepsRemaining err=0  RemainingSteps=0
05:47:19 Filter is already there-color wheel unchanged
05:47:19 Received message from Master: op=Shutter serial=183644
05:47:19 Shutter LASER close
05:47:19 Received message from Camera: op=State serial=183646
05:47:19 GetSingleValue result=40  Value=cccccccc
05:47:19 SkyScan query
05:47:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:47:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:47:20 Parameters OK
05:47:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:47:20 Set A/D data flow result=40
05:47:20 Set A/D channel type result=40
05:47:20 Set A/D encoding result=40
05:47:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:47:20 Set channel filter=0.000000e+000  result=40
05:47:20 Config A/D  Result=40
05:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:47:20 Get A/D filter: -9.255963e+061  result=40
05:47:20 Get A/D value=-858993460  result=40
05:47:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:47:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:47:20 Parameters OK
05:47:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:47:20 Set A/D data flow result=40
05:47:20 Set A/D channel type result=40
05:47:20 Set A/D encoding result=40
05:47:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:47:20 Set channel filter=0.000000e+000  result=40
05:47:20 Config A/D  Result=40
05:47:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:47:20 Get A/D filter: -9.255963e+061  result=40
05:47:20 Get A/D value=-858993460  result=40
05:47:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:47:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:47:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:47:20 Aux=
05:47:20 Message to Camera, serial 183646 queued
05:47:57 Received message from Master: op=PointingHead serial=183659
05:47:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:47:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:47:57 Point started: ret=0
05:47:57 point_skyscan result=0
05:47:58 Check angles
05:47:58 SkyScan query
05:47:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:47:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:47:59 Message to Master queued w/err=0: serial=183659 error=0
05:48:04 Received message from Master: op=Filter serial=183660
05:48:04 Color wheel filter change from 0 to 0
05:48:04 FLIGetFilterPos err=0  currentPosition=0
05:48:04 FLIGetStepsRemaining err=0  RemainingSteps=0
05:48:04 Filter is already there-color wheel unchanged
05:48:04 Received message from Master: op=Shutter serial=183661
05:48:04 Shutter LASER close
05:48:04 Received message from Camera: op=State serial=183663
05:48:04 GetSingleValue result=40  Value=cccccccc
05:48:04 SkyScan query
05:48:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:48:04 Parameters OK
05:48:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:48:04 Set A/D data flow result=40
05:48:04 Set A/D channel type result=40
05:48:04 Set A/D encoding result=40
05:48:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:48:04 Set channel filter=0.000000e+000  result=40
05:48:04 Config A/D  Result=40
05:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:48:04 Get A/D filter: -9.255963e+061  result=40
05:48:04 Get A/D value=-858993460  result=40
05:48:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:48:04 Parameters OK
05:48:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:48:04 Set A/D data flow result=40
05:48:04 Set A/D channel type result=40
05:48:04 Set A/D encoding result=40
05:48:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:48:04 Set channel filter=0.000000e+000  result=40
05:48:04 Config A/D  Result=40
05:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:48:04 Get A/D filter: -9.255963e+061  result=40
05:48:04 Get A/D value=-858993460  result=40
05:48:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:48:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:48:04 Aux=
05:48:04 Message to Camera, serial 183663 queued
05:48:41 Received message from Master: op=PointingHead serial=183676
05:48:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:48:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:48:42 Point started: ret=0
05:48:42 point_skyscan result=0
05:48:42 Check angles
05:48:42 SkyScan query
05:48:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:48:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:48:43 Message to Master queued w/err=0: serial=183676 error=0
05:48:48 Received message from Master: op=Filter serial=183677
05:48:48 Color wheel filter change from 0 to 0
05:48:48 FLIGetFilterPos err=0  currentPosition=0
05:48:48 FLIGetStepsRemaining err=0  RemainingSteps=0
05:48:48 Filter is already there-color wheel unchanged
05:48:48 Received message from Master: op=Shutter serial=183678
05:48:48 Shutter LASER close
05:48:48 Received message from Camera: op=State serial=183680
05:48:48 GetSingleValue result=40  Value=cccccccc
05:48:48 SkyScan query
05:48:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:48:49 Parameters OK
05:48:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:48:49 Set A/D data flow result=40
05:48:49 Set A/D channel type result=40
05:48:49 Set A/D encoding result=40
05:48:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:48:49 Set channel filter=0.000000e+000  result=40
05:48:49 Config A/D  Result=40
05:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:48:49 Get A/D filter: -9.255963e+061  result=40
05:48:49 Get A/D value=-858993460  result=40
05:48:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:48:49 Parameters OK
05:48:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:48:49 Set A/D data flow result=40
05:48:49 Set A/D channel type result=40
05:48:49 Set A/D encoding result=40
05:48:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:48:49 Set channel filter=0.000000e+000  result=40
05:48:49 Config A/D  Result=40
05:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:48:49 Get A/D filter: -9.255963e+061  result=40
05:48:49 Get A/D value=-858993460  result=40
05:48:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:48:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:48:49 Aux=
05:48:49 Message to Camera, serial 183680 queued
05:49:26 Received message from Master: op=PointingHead serial=183693
05:49:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:49:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:49:26 Point started: ret=0
05:49:26 point_skyscan result=0
05:49:27 Check angles
05:49:27 SkyScan query
05:49:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:49:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:49:27 Message to Master queued w/err=0: serial=183693 error=0
05:49:32 Received message from Master: op=Filter serial=183694
05:49:32 Color wheel filter change from 0 to 0
05:49:32 FLIGetFilterPos err=0  currentPosition=0
05:49:32 FLIGetStepsRemaining err=0  RemainingSteps=0
05:49:32 Filter is already there-color wheel unchanged
05:49:32 Received message from Master: op=Shutter serial=183695
05:49:32 Shutter LASER close
05:49:32 Received message from Camera: op=State serial=183697
05:49:32 GetSingleValue result=40  Value=cccccccc
05:49:32 SkyScan query
05:49:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:49:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:49:33 Parameters OK
05:49:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:49:33 Set A/D data flow result=40
05:49:33 Set A/D channel type result=40
05:49:33 Set A/D encoding result=40
05:49:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:49:33 Set channel filter=0.000000e+000  result=40
05:49:33 Config A/D  Result=40
05:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:49:33 Get A/D filter: -9.255963e+061  result=40
05:49:33 Get A/D value=-858993460  result=40
05:49:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:49:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:49:33 Parameters OK
05:49:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:49:33 Set A/D data flow result=40
05:49:33 Set A/D channel type result=40
05:49:33 Set A/D encoding result=40
05:49:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:49:33 Set channel filter=0.000000e+000  result=40
05:49:33 Config A/D  Result=40
05:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:49:33 Get A/D filter: -9.255963e+061  result=40
05:49:33 Get A/D value=-858993460  result=40
05:49:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:49:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:49:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:49:33 Aux=
05:49:33 Message to Camera, serial 183697 queued
05:50:10 Received message from Master: op=PointingHead serial=183710
05:50:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:50:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:50:10 Point started: ret=0
05:50:10 point_skyscan result=0
05:50:11 Check angles
05:50:11 SkyScan query
05:50:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.25<-13550  Statuses=0008 0009
05:50:12 Msec=0  True Az=112.995  Ze=-23.25  Az status=0008  Ze status=0009
05:50:12 Check angles
05:50:12 SkyScan query
05:50:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.67<-14978  Statuses=0008 0009
05:50:12 Msec=750  True Az=112.995  Ze=-44.67  Az status=0008  Ze status=0009
05:50:12 Check angles
05:50:12 SkyScan query
05:50:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.61<-16374  Statuses=0008 0009
05:50:13 Msec=1500  True Az=112.995  Ze=-65.61  Az status=0008  Ze status=0009
05:50:13 Check angles
05:50:13 SkyScan query
05:50:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.58<-17772  Statuses=0008 0009
05:50:14 Msec=2250  True Az=112.995  Ze=-86.58  Az status=0008  Ze status=0009
05:50:14 Check angles
05:50:14 SkyScan query
05:50:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.535<-19169  Statuses=0008 0009
05:50:15 Msec=3000  True Az=112.995  Ze=-107.535  Az status=0008  Ze status=0009
05:50:15 Check angles
05:50:15 SkyScan query
05:50:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.46<-20564  Statuses=0008 0009
05:50:15 Msec=3750  True Az=112.995  Ze=-128.46  Az status=0008  Ze status=0009
05:50:15 Check angles
05:50:15 SkyScan query
05:50:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.445<-21963  Statuses=0008 0009
05:50:16 Msec=4500  True Az=112.995  Ze=-149.445  Az status=0008  Ze status=0009
05:50:16 Check angles
05:50:16 SkyScan query
05:50:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.385<-23359  Statuses=0008 0009
05:50:17 Msec=5250  True Az=112.995  Ze=-170.385  Az status=0008  Ze status=0009
05:50:17 Check angles
05:50:17 SkyScan query
05:50:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:50:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:50:18 Message to Master queued w/err=0: serial=183710 error=0
05:50:23 Received message from Master: op=Filter serial=183711
05:50:23 Color wheel filter change from 0 to 0
05:50:23 FLIGetFilterPos err=0  currentPosition=0
05:50:23 FLIGetStepsRemaining err=0  RemainingSteps=0
05:50:23 Filter is already there-color wheel unchanged
05:50:23 Received message from Master: op=Shutter serial=183712
05:50:23 Shutter LASER open
05:50:23 Received message from Camera: op=State serial=183714
05:50:23 GetSingleValue result=40  Value=cccccccc
05:50:23 SkyScan query
05:50:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:50:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:23 Parameters OK
05:50:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:23 Set A/D data flow result=40
05:50:23 Set A/D channel type result=40
05:50:23 Set A/D encoding result=40
05:50:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:23 Set channel filter=0.000000e+000  result=40
05:50:23 Config A/D  Result=40
05:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:23 Get A/D filter: -9.255963e+061  result=40
05:50:23 Get A/D value=-858993460  result=40
05:50:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:23 Parameters OK
05:50:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:23 Set A/D data flow result=40
05:50:23 Set A/D channel type result=40
05:50:23 Set A/D encoding result=40
05:50:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:23 Set channel filter=0.000000e+000  result=40
05:50:23 Config A/D  Result=40
05:50:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:23 Get A/D filter: -9.255963e+061  result=40
05:50:23 Get A/D value=-858993460  result=40
05:50:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:50:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:50:23 Aux=
05:50:23 Message to Camera, serial 183714 queued
05:50:32 Received message from Master: op=Shutter serial=183724
05:50:32 Shutter LASER close
05:50:33 Received message from Master: op=PointingHead serial=183728
05:50:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:50:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:50:33 Point started: ret=0
05:50:33 point_skyscan result=0
05:50:34 Check angles
05:50:34 SkyScan query
05:50:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.89<-21526  Statuses=0008 0009
05:50:34 Msec=0  True Az=112.995  Ze=-142.89  Az status=0008  Ze status=0009
05:50:34 Check angles
05:50:34 SkyScan query
05:50:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.5<-20100  Statuses=0008 0009
05:50:35 Msec=750  True Az=112.995  Ze=-121.5  Az status=0008  Ze status=0009
05:50:35 Check angles
05:50:35 SkyScan query
05:50:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.545<-18703  Statuses=0008 0009
05:50:36 Msec=1500  True Az=112.995  Ze=-100.545  Az status=0008  Ze status=0009
05:50:36 Check angles
05:50:36 SkyScan query
05:50:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.59<-17306  Statuses=0008 0009
05:50:36 Msec=2250  True Az=112.995  Ze=-79.59  Az status=0008  Ze status=0009
05:50:37 Check angles
05:50:37 SkyScan query
05:50:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.635<-15909  Statuses=0008 0009
05:50:37 Msec=3000  True Az=112.995  Ze=-58.635  Az status=0008  Ze status=0009
05:50:37 Check angles
05:50:37 SkyScan query
05:50:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.695<-14513  Statuses=0008 0009
05:50:38 Msec=3750  True Az=112.995  Ze=-37.695  Az status=0008  Ze status=0009
05:50:38 Check angles
05:50:38 SkyScan query
05:50:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.26<-13084  Statuses=0008 0009
05:50:39 Msec=4500  True Az=112.995  Ze=-16.26  Az status=0008  Ze status=0009
05:50:39 Check angles
05:50:39 SkyScan query
05:50:39 SkyScan query done: ret=0  az=112.995<-7533  ze=4.875<-11675  Statuses=0008 0009
05:50:39 Msec=5250  True Az=112.995  Ze=4.875  Az status=0008  Ze status=0009
05:50:40 Check angles
05:50:40 SkyScan query
05:50:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:50:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:50:40 Message to Master queued w/err=0: serial=183728 error=0
05:50:45 Received message from Master: op=Filter serial=183729
05:50:45 Color wheel filter change from 0 to 0
05:50:45 FLIGetFilterPos err=0  currentPosition=0
05:50:45 FLIGetStepsRemaining err=0  RemainingSteps=0
05:50:45 Filter is already there-color wheel unchanged
05:50:45 Received message from Master: op=Shutter serial=183730
05:50:45 Shutter LASER close
05:50:46 Received message from Camera: op=State serial=183732
05:50:46 GetSingleValue result=40  Value=cccccccc
05:50:46 SkyScan query
05:50:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:50:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:46 Parameters OK
05:50:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:46 Set A/D data flow result=40
05:50:46 Set A/D channel type result=40
05:50:46 Set A/D encoding result=40
05:50:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:46 Set channel filter=0.000000e+000  result=40
05:50:46 Config A/D  Result=40
05:50:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:46 Get A/D filter: -9.255963e+061  result=40
05:50:46 Get A/D value=-858993460  result=40
05:50:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:50:46 Parameters OK
05:50:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:50:46 Set A/D data flow result=40
05:50:46 Set A/D channel type result=40
05:50:46 Set A/D encoding result=40
05:50:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:50:46 Set channel filter=0.000000e+000  result=40
05:50:46 Config A/D  Result=40
05:50:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:50:46 Get A/D filter: -9.255963e+061  result=40
05:50:46 Get A/D value=-858993460  result=40
05:50:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:50:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:50:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:50:46 Aux=
05:50:46 Message to Camera, serial 183732 queued
05:51:23 Received message from Master: op=PointingHead serial=183745
05:51:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:51:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:51:23 Point started: ret=0
05:51:23 point_skyscan result=0
05:51:24 Check angles
05:51:24 SkyScan query
05:51:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:51:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:51:25 Message to Master queued w/err=0: serial=183745 error=0
05:51:30 Received message from Master: op=Filter serial=183746
05:51:30 Color wheel filter change from 0 to 0
05:51:30 FLIGetFilterPos err=0  currentPosition=0
05:51:30 FLIGetStepsRemaining err=0  RemainingSteps=0
05:51:30 Filter is already there-color wheel unchanged
05:51:30 Received message from Master: op=Shutter serial=183747
05:51:30 Shutter LASER close
05:51:30 Received message from Camera: op=State serial=183749
05:51:30 GetSingleValue result=40  Value=cccccccc
05:51:30 SkyScan query
05:51:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:51:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:51:31 Parameters OK
05:51:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:51:31 Set A/D data flow result=40
05:51:31 Set A/D channel type result=40
05:51:31 Set A/D encoding result=40
05:51:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:51:31 Set channel filter=0.000000e+000  result=40
05:51:31 Config A/D  Result=40
05:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:51:31 Get A/D filter: -9.255963e+061  result=40
05:51:31 Get A/D value=-858993460  result=40
05:51:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:51:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:51:31 Parameters OK
05:51:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:51:31 Set A/D data flow result=40
05:51:31 Set A/D channel type result=40
05:51:31 Set A/D encoding result=40
05:51:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:51:31 Set channel filter=0.000000e+000  result=40
05:51:31 Config A/D  Result=40
05:51:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:51:31 Get A/D filter: -9.255963e+061  result=40
05:51:31 Get A/D value=-858993460  result=40
05:51:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:51:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:51:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:51:31 Aux=
05:51:31 Message to Camera, serial 183749 queued
05:52:07 Received message from Master: op=PointingHead serial=183762
05:52:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:52:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:52:08 Point started: ret=0
05:52:08 point_skyscan result=0
05:52:08 Check angles
05:52:08 SkyScan query
05:52:09 SkyScan query done: ret=0  az=136.335<-9089  ze=-6.51<-12434  Statuses=0009 0008
05:52:09 Msec=0  True Az=136.335  Ze=-6.51  Az status=0009  Ze status=0008
05:52:09 Check angles
05:52:09 SkyScan query
05:52:10 SkyScan query done: ret=0  az=153.78<-10252  ze=-6.495<-12433  Statuses=0009 0008
05:52:10 Msec=750  True Az=153.78  Ze=-6.495  Az status=0009  Ze status=0008
05:52:10 Check angles
05:52:10 SkyScan query
05:52:11 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.495<-12433  Statuses=0009 0008
05:52:11 Msec=1500  True Az=171.315  Ze=-6.495  Az status=0009  Ze status=0008
05:52:11 Check angles
05:52:11 SkyScan query
05:52:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:52:11 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:52:11 Message to Master queued w/err=0: serial=183762 error=0
05:52:16 Received message from Master: op=Filter serial=183763
05:52:16 Color wheel filter change from 0 to 0
05:52:16 FLIGetFilterPos err=0  currentPosition=0
05:52:16 FLIGetStepsRemaining err=0  RemainingSteps=0
05:52:16 Filter is already there-color wheel unchanged
05:52:16 Received message from Master: op=Shutter serial=183764
05:52:16 Shutter LASER close
05:52:17 Received message from Camera: op=State serial=183766
05:52:17 GetSingleValue result=40  Value=cccccccc
05:52:17 SkyScan query
05:52:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:52:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:52:17 Parameters OK
05:52:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:52:17 Set A/D data flow result=40
05:52:17 Set A/D channel type result=40
05:52:17 Set A/D encoding result=40
05:52:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:52:17 Set channel filter=0.000000e+000  result=40
05:52:17 Config A/D  Result=40
05:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:52:17 Get A/D filter: -9.255963e+061  result=40
05:52:17 Get A/D value=-858993460  result=40
05:52:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:52:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:52:17 Parameters OK
05:52:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:52:17 Set A/D data flow result=40
05:52:17 Set A/D channel type result=40
05:52:17 Set A/D encoding result=40
05:52:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:52:17 Set channel filter=0.000000e+000  result=40
05:52:17 Config A/D  Result=40
05:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:52:17 Get A/D filter: -9.255963e+061  result=40
05:52:17 Get A/D value=-858993460  result=40
05:52:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:52:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:52:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:52:17 Aux=
05:52:17 Message to Camera, serial 183766 queued
05:52:54 Received message from Master: op=PointingHead serial=183779
05:52:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:52:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:52:54 Point started: ret=0
05:52:54 point_skyscan result=0
05:52:55 Check angles
05:52:55 SkyScan query
05:52:56 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
05:52:56 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
05:52:56 Check angles
05:52:56 SkyScan query
05:52:56 SkyScan query done: ret=0  az=135.495<-9033  ze=6.495<-11567  Statuses=0009 0008
05:52:56 Msec=750  True Az=135.495  Ze=6.495  Az status=0009  Ze status=0008
05:52:57 Check angles
05:52:57 SkyScan query
05:52:57 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
05:52:57 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
05:52:57 Check angles
05:52:57 SkyScan query
05:52:58 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
05:52:58 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
05:52:58 Message to Master queued w/err=0: serial=183779 error=0
05:53:03 Received message from Master: op=Filter serial=183780
05:53:03 Color wheel filter change from 0 to 0
05:53:03 FLIGetFilterPos err=0  currentPosition=0
05:53:03 FLIGetStepsRemaining err=0  RemainingSteps=0
05:53:03 Filter is already there-color wheel unchanged
05:53:03 Received message from Master: op=Shutter serial=183781
05:53:03 Shutter LASER close
05:53:03 Received message from Camera: op=State serial=183783
05:53:03 GetSingleValue result=40  Value=cccccccc
05:53:03 SkyScan query
05:53:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:53:04 Parameters OK
05:53:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:53:04 Set A/D data flow result=40
05:53:04 Set A/D channel type result=40
05:53:04 Set A/D encoding result=40
05:53:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:53:04 Set channel filter=0.000000e+000  result=40
05:53:04 Config A/D  Result=40
05:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:53:04 Get A/D filter: -9.255963e+061  result=40
05:53:04 Get A/D value=-858993460  result=40
05:53:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:53:04 Parameters OK
05:53:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:53:04 Set A/D data flow result=40
05:53:04 Set A/D channel type result=40
05:53:04 Set A/D encoding result=40
05:53:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:53:04 Set channel filter=0.000000e+000  result=40
05:53:04 Config A/D  Result=40
05:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:53:04 Get A/D filter: -9.255963e+061  result=40
05:53:04 Get A/D value=-858993460  result=40
05:53:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:53:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:53:04 Aux=
05:53:04 Message to Camera, serial 183783 queued
05:53:40 Received message from Master: op=PointingHead serial=183795
05:53:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:53:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:53:40 Point started: ret=0
05:53:40 point_skyscan result=0
05:53:41 Check angles
05:53:41 SkyScan query
05:53:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.835<-13589  Statuses=0008 0009
05:53:41 Msec=0  True Az=112.995  Ze=-23.835  Az status=0008  Ze status=0009
05:53:41 Check angles
05:53:41 SkyScan query
05:53:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.225<-15015  Statuses=0008 0009
05:53:42 Msec=750  True Az=112.995  Ze=-45.225  Az status=0008  Ze status=0009
05:53:42 Check angles
05:53:42 SkyScan query
05:53:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.6<-16440  Statuses=0008 0009
05:53:43 Msec=1500  True Az=112.995  Ze=-66.6  Az status=0008  Ze status=0009
05:53:43 Check angles
05:53:43 SkyScan query
05:53:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.555<-17837  Statuses=0008 0009
05:53:44 Msec=2250  True Az=112.995  Ze=-87.555  Az status=0008  Ze status=0009
05:53:44 Check angles
05:53:44 SkyScan query
05:53:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.495<-19233  Statuses=0008 0009
05:53:44 Msec=3000  True Az=112.995  Ze=-108.495  Az status=0008  Ze status=0009
05:53:44 Check angles
05:53:44 SkyScan query
05:53:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.45<-20630  Statuses=0008 0009
05:53:45 Msec=3750  True Az=112.995  Ze=-129.45  Az status=0008  Ze status=0009
05:53:45 Check angles
05:53:45 SkyScan query
05:53:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.42<-22028  Statuses=0008 0009
05:53:46 Msec=4500  True Az=112.995  Ze=-150.42  Az status=0008  Ze status=0009
05:53:46 Check angles
05:53:46 SkyScan query
05:53:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.51<-23434  Statuses=0008 0009
05:53:47 Msec=5250  True Az=112.995  Ze=-171.51  Az status=0008  Ze status=0009
05:53:47 Check angles
05:53:47 SkyScan query
05:53:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:53:47 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:53:47 Message to Master queued w/err=0: serial=183795 error=0
05:53:52 Received message from Master: op=Filter serial=183796
05:53:52 Color wheel filter change from 0 to 0
05:53:52 FLIGetFilterPos err=0  currentPosition=0
05:53:52 FLIGetStepsRemaining err=0  RemainingSteps=0
05:53:52 Filter is already there-color wheel unchanged
05:53:52 Received message from Master: op=Shutter serial=183797
05:53:52 Shutter LASER open
05:53:53 Received message from Camera: op=State serial=183799
05:53:53 GetSingleValue result=40  Value=cccccccc
05:53:53 SkyScan query
05:53:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:53:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:53:53 Parameters OK
05:53:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:53:53 Set A/D data flow result=40
05:53:53 Set A/D channel type result=40
05:53:53 Set A/D encoding result=40
05:53:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:53:53 Set channel filter=0.000000e+000  result=40
05:53:53 Config A/D  Result=40
05:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:53:53 Get A/D filter: -9.255963e+061  result=40
05:53:53 Get A/D value=-858993460  result=40
05:53:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:53:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:53:53 Parameters OK
05:53:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:53:53 Set A/D data flow result=40
05:53:53 Set A/D channel type result=40
05:53:53 Set A/D encoding result=40
05:53:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:53:53 Set channel filter=0.000000e+000  result=40
05:53:53 Config A/D  Result=40
05:53:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:53:53 Get A/D filter: -9.255963e+061  result=40
05:53:53 Get A/D value=-858993460  result=40
05:53:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:53:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:53:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:53:53 Aux=
05:53:53 Message to Camera, serial 183799 queued
05:54:02 Received message from Master: op=Shutter serial=183809
05:54:02 Shutter LASER close
05:54:02 Received message from Master: op=PointingHead serial=183813
05:54:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:54:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:54:02 Point started: ret=0
05:54:02 point_skyscan result=0
05:54:03 Check angles
05:54:03 SkyScan query
05:54:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.145<-21543  Statuses=0008 0009
05:54:04 Msec=0  True Az=112.995  Ze=-143.145  Az status=0008  Ze status=0009
05:54:04 Check angles
05:54:04 SkyScan query
05:54:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.77<-20118  Statuses=0008 0009
05:54:04 Msec=750  True Az=112.995  Ze=-121.77  Az status=0008  Ze status=0009
05:54:05 Check angles
05:54:05 SkyScan query
05:54:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.38<-18692  Statuses=0008 0009
05:54:05 Msec=1500  True Az=112.995  Ze=-100.38  Az status=0008  Ze status=0009
05:54:05 Check angles
05:54:05 SkyScan query
05:54:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.425<-17295  Statuses=0008 0009
05:54:06 Msec=2250  True Az=112.995  Ze=-79.425  Az status=0008  Ze status=0009
05:54:06 Check angles
05:54:06 SkyScan query
05:54:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.455<-15897  Statuses=0008 0009
05:54:07 Msec=3000  True Az=112.995  Ze=-58.455  Az status=0008  Ze status=0009
05:54:07 Check angles
05:54:07 SkyScan query
05:54:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.53<-14502  Statuses=0008 0009
05:54:08 Msec=3750  True Az=112.995  Ze=-37.53  Az status=0008  Ze status=0009
05:54:08 Check angles
[UTC 2019-3-9  05:54:08]
05:54:08 SkyScan query
05:54:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-14.82<-12988  Statuses=0008 0009
05:54:08 Msec=4500  True Az=112.995  Ze=-14.82  Az status=0008  Ze status=0009
05:54:08 Check angles
05:54:08 SkyScan query
05:54:09 SkyScan query done: ret=0  az=112.995<-7533  ze=4.68<-11688  Statuses=0008 0009
05:54:09 Msec=5250  True Az=112.995  Ze=4.68  Az status=0008  Ze status=0009
05:54:09 Check angles
05:54:09 SkyScan query
05:54:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:54:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:54:10 Message to Master queued w/err=0: serial=183813 error=0
05:54:15 Received message from Master: op=Filter serial=183814
05:54:15 Color wheel filter change from 0 to 0
05:54:15 FLIGetFilterPos err=0  currentPosition=0
05:54:15 FLIGetStepsRemaining err=0  RemainingSteps=0
05:54:15 Filter is already there-color wheel unchanged
05:54:15 Received message from Master: op=Shutter serial=183815
05:54:15 Shutter LASER close
05:54:15 Received message from Camera: op=State serial=183817
05:54:15 GetSingleValue result=40  Value=cccccccc
05:54:15 SkyScan query
05:54:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:54:16 Parameters OK
05:54:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:54:16 Set A/D data flow result=40
05:54:16 Set A/D channel type result=40
05:54:16 Set A/D encoding result=40
05:54:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:54:16 Set channel filter=0.000000e+000  result=40
05:54:16 Config A/D  Result=40
05:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:54:16 Get A/D filter: -9.255963e+061  result=40
05:54:16 Get A/D value=-858993460  result=40
05:54:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:54:16 Parameters OK
05:54:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:54:16 Set A/D data flow result=40
05:54:16 Set A/D channel type result=40
05:54:16 Set A/D encoding result=40
05:54:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:54:16 Set channel filter=0.000000e+000  result=40
05:54:16 Config A/D  Result=40
05:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:54:16 Get A/D filter: -9.255963e+061  result=40
05:54:16 Get A/D value=-858993460  result=40
05:54:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:54:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:54:16 Aux=
05:54:16 Message to Camera, serial 183817 queued
05:54:53 Received message from Master: op=PointingHead serial=183830
05:54:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:54:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:54:53 Point started: ret=0
05:54:53 point_skyscan result=0
05:54:54 Check angles
05:54:54 SkyScan query
05:54:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:54:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:54:54 Message to Master queued w/err=0: serial=183830 error=0
05:54:59 Received message from Master: op=Filter serial=183831
05:54:59 Color wheel filter change from 0 to 0
05:54:59 FLIGetFilterPos err=0  currentPosition=0
05:54:59 FLIGetStepsRemaining err=0  RemainingSteps=0
05:54:59 Filter is already there-color wheel unchanged
05:54:59 Received message from Master: op=Shutter serial=183832
05:54:59 Shutter LASER close
05:54:59 Received message from Camera: op=State serial=183834
05:54:59 GetSingleValue result=40  Value=cccccccc
05:54:59 SkyScan query
05:55:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:55:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:55:00 Parameters OK
05:55:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:55:00 Set A/D data flow result=40
05:55:00 Set A/D channel type result=40
05:55:00 Set A/D encoding result=40
05:55:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:55:00 Set channel filter=0.000000e+000  result=40
05:55:00 Config A/D  Result=40
05:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:55:00 Get A/D filter: -9.255963e+061  result=40
05:55:00 Get A/D value=-858993460  result=40
05:55:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:55:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:55:00 Parameters OK
05:55:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:55:00 Set A/D data flow result=40
05:55:00 Set A/D channel type result=40
05:55:00 Set A/D encoding result=40
05:55:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:55:00 Set channel filter=0.000000e+000  result=40
05:55:00 Config A/D  Result=40
05:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:55:00 Get A/D filter: -9.255963e+061  result=40
05:55:00 Get A/D value=-858993460  result=40
05:55:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:55:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:55:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:55:00 Aux=
05:55:00 Message to Camera, serial 183834 queued
05:55:37 Received message from Master: op=PointingHead serial=183847
05:55:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:55:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:55:37 Point started: ret=0
05:55:37 point_skyscan result=0
05:55:38 Check angles
05:55:38 SkyScan query
05:55:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:55:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:55:38 Message to Master queued w/err=0: serial=183847 error=0
05:55:43 Received message from Master: op=Filter serial=183848
05:55:43 Color wheel filter change from 0 to 0
05:55:43 FLIGetFilterPos err=0  currentPosition=0
05:55:43 FLIGetStepsRemaining err=0  RemainingSteps=0
05:55:43 Filter is already there-color wheel unchanged
05:55:44 Received message from Master: op=Shutter serial=183849
05:55:44 Shutter LASER close
05:55:44 Received message from Camera: op=State serial=183851
05:55:44 GetSingleValue result=40  Value=cccccccc
05:55:44 SkyScan query
05:55:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:55:44 Parameters OK
05:55:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:55:44 Set A/D data flow result=40
05:55:44 Set A/D channel type result=40
05:55:44 Set A/D encoding result=40
05:55:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:55:44 Set channel filter=0.000000e+000  result=40
05:55:44 Config A/D  Result=40
05:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:55:44 Get A/D filter: -9.255963e+061  result=40
05:55:44 Get A/D value=-858993460  result=40
05:55:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:55:44 Parameters OK
05:55:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:55:44 Set A/D data flow result=40
05:55:44 Set A/D channel type result=40
05:55:44 Set A/D encoding result=40
05:55:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:55:44 Set channel filter=0.000000e+000  result=40
05:55:44 Config A/D  Result=40
05:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:55:44 Get A/D filter: -9.255963e+061  result=40
05:55:44 Get A/D value=-858993460  result=40
05:55:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:55:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:55:44 Aux=
05:55:44 Message to Camera, serial 183851 queued
05:56:21 Received message from Master: op=PointingHead serial=183864
05:56:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:56:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:56:21 Point started: ret=0
05:56:21 point_skyscan result=0
05:56:22 Check angles
05:56:22 SkyScan query
05:56:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:56:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:56:23 Message to Master queued w/err=0: serial=183864 error=0
05:56:28 Received message from Master: op=Filter serial=183865
05:56:28 Color wheel filter change from 0 to 0
05:56:28 FLIGetFilterPos err=0  currentPosition=0
05:56:28 FLIGetStepsRemaining err=0  RemainingSteps=0
05:56:28 Filter is already there-color wheel unchanged
05:56:28 Received message from Master: op=Shutter serial=183866
05:56:28 Shutter LASER close
05:56:28 Received message from Camera: op=State serial=183868
05:56:28 GetSingleValue result=40  Value=cccccccc
05:56:28 SkyScan query
05:56:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:56:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:56:29 Parameters OK
05:56:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:56:29 Set A/D data flow result=40
05:56:29 Set A/D channel type result=40
05:56:29 Set A/D encoding result=40
05:56:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:56:29 Set channel filter=0.000000e+000  result=40
05:56:29 Config A/D  Result=40
05:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:56:29 Get A/D filter: -9.255963e+061  result=40
05:56:29 Get A/D value=-858993460  result=40
05:56:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:56:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:56:29 Parameters OK
05:56:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:56:29 Set A/D data flow result=40
05:56:29 Set A/D channel type result=40
05:56:29 Set A/D encoding result=40
05:56:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:56:29 Set channel filter=0.000000e+000  result=40
05:56:29 Config A/D  Result=40
05:56:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:56:29 Get A/D filter: -9.255963e+061  result=40
05:56:29 Get A/D value=-858993460  result=40
05:56:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:56:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:56:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:56:29 Aux=
05:56:29 Message to Camera, serial 183868 queued
05:57:05 Received message from Master: op=PointingHead serial=183881
05:57:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
05:57:05 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
05:57:06 Point started: ret=0
05:57:06 point_skyscan result=0
05:57:07 Check angles
05:57:07 SkyScan query
05:57:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
05:57:07 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
05:57:07 Check angles
05:57:07 SkyScan query
05:57:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.895<-14993  Statuses=0008 0009
05:57:08 Msec=750  True Az=112.995  Ze=-44.895  Az status=0008  Ze status=0009
05:57:08 Check angles
05:57:08 SkyScan query
05:57:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.835<-16389  Statuses=0008 0009
05:57:09 Msec=1500  True Az=112.995  Ze=-65.835  Az status=0008  Ze status=0009
05:57:09 Check angles
05:57:09 SkyScan query
05:57:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.775<-17785  Statuses=0008 0009
05:57:09 Msec=2250  True Az=112.995  Ze=-86.775  Az status=0008  Ze status=0009
05:57:10 Check angles
05:57:10 SkyScan query
05:57:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.73<-19182  Statuses=0008 0009
05:57:10 Msec=3000  True Az=112.995  Ze=-107.73  Az status=0008  Ze status=0009
05:57:10 Check angles
05:57:10 SkyScan query
05:57:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.12<-20608  Statuses=0008 0009
05:57:11 Msec=3750  True Az=112.995  Ze=-129.12  Az status=0008  Ze status=0009
05:57:11 Check angles
05:57:11 SkyScan query
05:57:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.075<-22005  Statuses=0008 0009
05:57:12 Msec=4500  True Az=112.995  Ze=-150.075  Az status=0008  Ze status=0009
05:57:12 Check angles
05:57:12 SkyScan query
05:57:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.925<-23395  Statuses=0008 0009
05:57:12 Msec=5250  True Az=112.995  Ze=-170.925  Az status=0008  Ze status=0009
05:57:13 Check angles
05:57:13 SkyScan query
05:57:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
05:57:13 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
05:57:13 Message to Master queued w/err=0: serial=183881 error=0
05:57:18 Received message from Master: op=Filter serial=183882
05:57:18 Color wheel filter change from 0 to 0
05:57:18 FLIGetFilterPos err=0  currentPosition=0
05:57:18 FLIGetStepsRemaining err=0  RemainingSteps=0
05:57:18 Filter is already there-color wheel unchanged
05:57:18 Received message from Master: op=Shutter serial=183883
05:57:18 Shutter LASER open
05:57:18 Received message from Camera: op=State serial=183885
05:57:18 GetSingleValue result=40  Value=cccccccc
05:57:18 SkyScan query
05:57:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
05:57:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:19 Parameters OK
05:57:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:19 Set A/D data flow result=40
05:57:19 Set A/D channel type result=40
05:57:19 Set A/D encoding result=40
05:57:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:19 Set channel filter=0.000000e+000  result=40
05:57:19 Config A/D  Result=40
05:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:19 Get A/D filter: -9.255963e+061  result=40
05:57:19 Get A/D value=-858993460  result=40
05:57:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:19 Parameters OK
05:57:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:19 Set A/D data flow result=40
05:57:19 Set A/D channel type result=40
05:57:19 Set A/D encoding result=40
05:57:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:19 Set channel filter=0.000000e+000  result=40
05:57:19 Config A/D  Result=40
05:57:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:19 Get A/D filter: -9.255963e+061  result=40
05:57:19 Get A/D value=-858993460  result=40
05:57:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:57:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:57:19 Aux=
05:57:19 Message to Camera, serial 183885 queued
05:57:28 Received message from Master: op=Shutter serial=183895
05:57:28 Shutter LASER close
05:57:28 Received message from Master: op=PointingHead serial=183899
05:57:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:57:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:57:28 Point started: ret=0
05:57:28 point_skyscan result=0
05:57:29 Check angles
05:57:29 SkyScan query
05:57:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
05:57:30 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
05:57:30 Check angles
05:57:30 SkyScan query
05:57:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
05:57:31 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
05:57:31 Check angles
05:57:31 SkyScan query
05:57:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.31<-18754  Statuses=0008 0009
05:57:31 Msec=1500  True Az=112.995  Ze=-101.31  Az status=0008  Ze status=0009
05:57:31 Check angles
05:57:31 SkyScan query
05:57:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.325<-17355  Statuses=0008 0009
05:57:32 Msec=2250  True Az=112.995  Ze=-80.325  Az status=0008  Ze status=0009
05:57:32 Check angles
05:57:32 SkyScan query
05:57:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.385<-15959  Statuses=0008 0009
05:57:33 Msec=3000  True Az=112.995  Ze=-59.385  Az status=0008  Ze status=0009
05:57:33 Check angles
05:57:33 SkyScan query
05:57:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.4<-14560  Statuses=0008 0009
05:57:34 Msec=3750  True Az=112.995  Ze=-38.4  Az status=0008  Ze status=0009
05:57:34 Check angles
05:57:34 SkyScan query
05:57:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.46<-13164  Statuses=0008 0009
05:57:34 Msec=4500  True Az=112.995  Ze=-17.46  Az status=0008  Ze status=0009
05:57:34 Check angles
05:57:34 SkyScan query
05:57:35 SkyScan query done: ret=0  az=112.995<-7533  ze=3.495<-11767  Statuses=0008 0009
05:57:35 Msec=5250  True Az=112.995  Ze=3.495  Az status=0008  Ze status=0009
05:57:35 Check angles
05:57:35 SkyScan query
05:57:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
05:57:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
05:57:36 Message to Master queued w/err=0: serial=183899 error=0
05:57:41 Received message from Master: op=Filter serial=183900
05:57:41 Color wheel filter change from 0 to 0
05:57:41 FLIGetFilterPos err=0  currentPosition=0
05:57:41 FLIGetStepsRemaining err=0  RemainingSteps=0
05:57:41 Filter is already there-color wheel unchanged
05:57:41 Received message from Master: op=Shutter serial=183901
05:57:41 Shutter LASER close
05:57:41 Received message from Camera: op=State serial=183903
05:57:41 GetSingleValue result=40  Value=cccccccc
05:57:41 SkyScan query
05:57:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:57:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:42 Parameters OK
05:57:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:42 Set A/D data flow result=40
05:57:42 Set A/D channel type result=40
05:57:42 Set A/D encoding result=40
05:57:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:42 Set channel filter=0.000000e+000  result=40
05:57:42 Config A/D  Result=40
05:57:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:42 Get A/D filter: -9.255963e+061  result=40
05:57:42 Get A/D value=-858993460  result=40
05:57:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:57:42 Parameters OK
05:57:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:57:42 Set A/D data flow result=40
05:57:42 Set A/D channel type result=40
05:57:42 Set A/D encoding result=40
05:57:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:57:42 Set channel filter=0.000000e+000  result=40
05:57:42 Config A/D  Result=40
05:57:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:57:42 Get A/D filter: -9.255963e+061  result=40
05:57:42 Get A/D value=-858993460  result=40
05:57:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:57:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:57:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:57:42 Aux=
05:57:42 Message to Camera, serial 183903 queued
05:58:19 Received message from Master: op=PointingHead serial=183916
05:58:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:58:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:58:19 Point started: ret=0
05:58:19 point_skyscan result=0
05:58:20 Check angles
05:58:20 SkyScan query
05:58:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:58:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:58:20 Message to Master queued w/err=0: serial=183916 error=0
05:58:25 Received message from Master: op=Filter serial=183917
05:58:25 Color wheel filter change from 0 to 0
05:58:25 FLIGetFilterPos err=0  currentPosition=0
05:58:25 FLIGetStepsRemaining err=0  RemainingSteps=0
05:58:25 Filter is already there-color wheel unchanged
05:58:25 Received message from Master: op=Shutter serial=183918
05:58:25 Shutter LASER close
05:58:26 Received message from Camera: op=State serial=183920
05:58:26 GetSingleValue result=40  Value=cccccccc
05:58:26 SkyScan query
05:58:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:58:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:58:26 Parameters OK
05:58:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:58:26 Set A/D data flow result=40
05:58:26 Set A/D channel type result=40
05:58:26 Set A/D encoding result=40
05:58:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:58:26 Set channel filter=0.000000e+000  result=40
05:58:26 Config A/D  Result=40
05:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:58:26 Get A/D filter: -9.255963e+061  result=40
05:58:26 Get A/D value=-858993460  result=40
05:58:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:58:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:58:26 Parameters OK
05:58:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:58:26 Set A/D data flow result=40
05:58:26 Set A/D channel type result=40
05:58:26 Set A/D encoding result=40
05:58:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:58:26 Set channel filter=0.000000e+000  result=40
05:58:26 Config A/D  Result=40
05:58:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:58:26 Get A/D filter: -9.255963e+061  result=40
05:58:26 Get A/D value=-858993460  result=40
05:58:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:58:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:58:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:58:26 Aux=
05:58:26 Message to Camera, serial 183920 queued
05:59:03 Received message from Master: op=PointingHead serial=183933
05:59:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
05:59:03 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
05:59:03 Point started: ret=0
05:59:03 point_skyscan result=0
05:59:04 Check angles
05:59:04 SkyScan query
05:59:05 SkyScan query done: ret=0  az=136.395<-9093  ze=-6.51<-12434  Statuses=0009 0008
05:59:05 Msec=0  True Az=136.395  Ze=-6.51  Az status=0009  Ze status=0008
05:59:05 Check angles
05:59:05 SkyScan query
05:59:05 SkyScan query done: ret=0  az=153.93<-10262  ze=-6.495<-12433  Statuses=0009 0008
05:59:05 Msec=750  True Az=153.93  Ze=-6.495  Az status=0009  Ze status=0008
05:59:06 Check angles
05:59:06 SkyScan query
05:59:06 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
05:59:06 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
05:59:06 Check angles
05:59:06 SkyScan query
05:59:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:59:07 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
05:59:07 Message to Master queued w/err=0: serial=183933 error=0
05:59:12 Received message from Master: op=Filter serial=183934
05:59:12 Color wheel filter change from 0 to 0
05:59:12 FLIGetFilterPos err=0  currentPosition=0
05:59:12 FLIGetStepsRemaining err=0  RemainingSteps=0
05:59:12 Filter is already there-color wheel unchanged
05:59:12 Received message from Master: op=Shutter serial=183935
05:59:12 Shutter LASER close
05:59:12 Received message from Camera: op=State serial=183937
05:59:12 GetSingleValue result=40  Value=cccccccc
05:59:12 SkyScan query
05:59:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
05:59:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:59:13 Parameters OK
05:59:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:59:13 Set A/D data flow result=40
05:59:13 Set A/D channel type result=40
05:59:13 Set A/D encoding result=40
05:59:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:59:13 Set channel filter=0.000000e+000  result=40
05:59:13 Config A/D  Result=40
05:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:59:13 Get A/D filter: -9.255963e+061  result=40
05:59:13 Get A/D value=-858993460  result=40
05:59:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:59:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:59:13 Parameters OK
05:59:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:59:13 Set A/D data flow result=40
05:59:13 Set A/D channel type result=40
05:59:13 Set A/D encoding result=40
05:59:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:59:13 Set channel filter=0.000000e+000  result=40
05:59:13 Config A/D  Result=40
05:59:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:59:13 Get A/D filter: -9.255963e+061  result=40
05:59:13 Get A/D value=-858993460  result=40
05:59:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:59:13 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:59:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:59:13 Aux=
05:59:13 Message to Camera, serial 183937 queued
05:59:50 Received message from Master: op=PointingHead serial=183950
05:59:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
05:59:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
05:59:50 Point started: ret=0
05:59:50 point_skyscan result=0
05:59:51 Check angles
05:59:51 SkyScan query
05:59:51 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
05:59:51 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
05:59:51 Check angles
05:59:51 SkyScan query
05:59:52 SkyScan query done: ret=0  az=135.24<-9016  ze=6.495<-11567  Statuses=0009 0008
05:59:52 Msec=750  True Az=135.24  Ze=6.495  Az status=0009  Ze status=0008
05:59:52 Check angles
05:59:52 SkyScan query
05:59:53 SkyScan query done: ret=0  az=117.72<-7848  ze=6.495<-11567  Statuses=0009 0008
05:59:53 Msec=1500  True Az=117.72  Ze=6.495  Az status=0009  Ze status=0008
05:59:53 Check angles
05:59:53 SkyScan query
05:59:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:59:53 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
05:59:53 Message to Master queued w/err=0: serial=183950 error=0
05:59:58 Received message from Master: op=Filter serial=183951
05:59:58 Color wheel filter change from 0 to 0
05:59:58 FLIGetFilterPos err=0  currentPosition=0
05:59:58 FLIGetStepsRemaining err=0  RemainingSteps=0
05:59:58 Filter is already there-color wheel unchanged
05:59:59 Received message from Master: op=Shutter serial=183952
05:59:59 Shutter LASER close
05:59:59 Received message from Camera: op=State serial=183954
05:59:59 GetSingleValue result=40  Value=cccccccc
05:59:59 SkyScan query
05:59:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
05:59:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:59:59 Parameters OK
05:59:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:59:59 Set A/D data flow result=40
05:59:59 Set A/D channel type result=40
05:59:59 Set A/D encoding result=40
05:59:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:59:59 Set channel filter=0.000000e+000  result=40
05:59:59 Config A/D  Result=40
05:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:59:59 Get A/D filter: -9.255963e+061  result=40
05:59:59 Get A/D value=-858993460  result=40
05:59:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:59:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
05:59:59 Parameters OK
05:59:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
05:59:59 Set A/D data flow result=40
05:59:59 Set A/D channel type result=40
05:59:59 Set A/D encoding result=40
05:59:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
05:59:59 Set channel filter=0.000000e+000  result=40
05:59:59 Config A/D  Result=40
05:59:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
05:59:59 Get A/D filter: -9.255963e+061  result=40
05:59:59 Get A/D value=-858993460  result=40
05:59:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
05:59:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
05:59:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
05:59:59 Aux=
05:59:59 Message to Camera, serial 183954 queued
06:00:36 Received message from Master: op=PointingHead serial=183967
06:00:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:00:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:00:36 Point started: ret=0
06:00:36 point_skyscan result=0
06:00:37 Check angles
06:00:37 SkyScan query
06:00:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
06:00:38 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
06:00:38 Check angles
06:00:38 SkyScan query
06:00:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.355<-14957  Statuses=0008 0009
06:00:39 Msec=750  True Az=112.995  Ze=-44.355  Az status=0008  Ze status=0009
06:00:39 Check angles
06:00:39 SkyScan query
06:00:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.31<-16354  Statuses=0008 0009
06:00:39 Msec=1500  True Az=112.995  Ze=-65.31  Az status=0008  Ze status=0009
06:00:39 Check angles
06:00:39 SkyScan query
06:00:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
06:00:40 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
06:00:40 Check angles
06:00:40 SkyScan query
06:00:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
06:00:41 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
06:00:41 Check angles
06:00:41 SkyScan query
06:00:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.58<-20572  Statuses=0008 0009
06:00:42 Msec=3750  True Az=112.995  Ze=-128.58  Az status=0008  Ze status=0009
06:00:42 Check angles
06:00:42 SkyScan query
06:00:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.55<-21970  Statuses=0008 0009
06:00:42 Msec=4500  True Az=112.995  Ze=-149.55  Az status=0008  Ze status=0009
06:00:42 Check angles
06:00:42 SkyScan query
06:00:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.49<-23366  Statuses=0008 0009
06:00:43 Msec=5250  True Az=112.995  Ze=-170.49  Az status=0008  Ze status=0009
06:00:43 Check angles
06:00:43 SkyScan query
06:00:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:00:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:00:44 Message to Master queued w/err=0: serial=183967 error=0
06:00:49 Received message from Master: op=Filter serial=183968
06:00:49 Color wheel filter change from 0 to 0
06:00:49 FLIGetFilterPos err=0  currentPosition=0
06:00:49 FLIGetStepsRemaining err=0  RemainingSteps=0
06:00:49 Filter is already there-color wheel unchanged
06:00:49 Received message from Master: op=Shutter serial=183969
06:00:49 Shutter LASER open
06:00:49 Received message from Camera: op=State serial=183971
06:00:49 GetSingleValue result=40  Value=cccccccc
06:00:49 SkyScan query
06:00:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:00:50 Parameters OK
06:00:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:00:50 Set A/D data flow result=40
06:00:50 Set A/D channel type result=40
06:00:50 Set A/D encoding result=40
06:00:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:00:50 Set channel filter=0.000000e+000  result=40
06:00:50 Config A/D  Result=40
06:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:00:50 Get A/D filter: -9.255963e+061  result=40
06:00:50 Get A/D value=-858993460  result=40
06:00:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:00:50 Parameters OK
06:00:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:00:50 Set A/D data flow result=40
06:00:50 Set A/D channel type result=40
06:00:50 Set A/D encoding result=40
06:00:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:00:50 Set channel filter=0.000000e+000  result=40
06:00:50 Config A/D  Result=40
06:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:00:50 Get A/D filter: -9.255963e+061  result=40
06:00:50 Get A/D value=-858993460  result=40
06:00:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:00:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:00:50 Aux=
06:00:50 Message to Camera, serial 183971 queued
06:00:58 Received message from Master: op=Shutter serial=183981
06:00:58 Shutter LASER close
06:00:59 Received message from Master: op=PointingHead serial=183985
06:00:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:00:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:00:59 Point started: ret=0
06:00:59 point_skyscan result=0
06:01:00 Check angles
06:01:00 SkyScan query
06:01:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.085<-21539  Statuses=0008 0009
06:01:00 Msec=0  True Az=112.995  Ze=-143.085  Az status=0008  Ze status=0009
06:01:00 Check angles
06:01:00 SkyScan query
06:01:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.13<-20142  Statuses=0008 0009
06:01:01 Msec=750  True Az=112.995  Ze=-122.13  Az status=0008  Ze status=0009
06:01:01 Check angles
06:01:01 SkyScan query
06:01:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.74<-18716  Statuses=0008 0009
06:01:02 Msec=1500  True Az=112.995  Ze=-100.74  Az status=0008  Ze status=0009
06:01:02 Check angles
06:01:02 SkyScan query
06:01:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.8<-17320  Statuses=0008 0009
06:01:03 Msec=2250  True Az=112.995  Ze=-79.8  Az status=0008  Ze status=0009
06:01:03 Check angles
06:01:03 SkyScan query
06:01:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.845<-15923  Statuses=0008 0009
06:01:03 Msec=3000  True Az=112.995  Ze=-58.845  Az status=0008  Ze status=0009
06:01:03 Check angles
06:01:03 SkyScan query
06:01:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.455<-14497  Statuses=0008 0009
06:01:04 Msec=3750  True Az=112.995  Ze=-37.455  Az status=0008  Ze status=0009
06:01:04 Check angles
06:01:04 SkyScan query
06:01:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.47<-13098  Statuses=0008 0009
06:01:05 Msec=4500  True Az=112.995  Ze=-16.47  Az status=0008  Ze status=0009
06:01:05 Check angles
06:01:05 SkyScan query
06:01:06 SkyScan query done: ret=0  az=112.995<-7533  ze=4.395<-11707  Statuses=0008 0009
06:01:06 Msec=5250  True Az=112.995  Ze=4.395  Az status=0008  Ze status=0009
06:01:06 Check angles
06:01:06 SkyScan query
06:01:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:01:06 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:01:06 Message to Master queued w/err=0: serial=183985 error=0
06:01:11 Received message from Master: op=Filter serial=183986
06:01:11 Color wheel filter change from 0 to 0
06:01:11 FLIGetFilterPos err=0  currentPosition=0
06:01:11 FLIGetStepsRemaining err=0  RemainingSteps=0
06:01:11 Filter is already there-color wheel unchanged
06:01:11 Received message from Master: op=Shutter serial=183987
06:01:11 Shutter LASER close
06:01:12 Received message from Camera: op=State serial=183989
06:01:12 GetSingleValue result=40  Value=cccccccc
06:01:12 SkyScan query
06:01:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:01:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:12 Parameters OK
06:01:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:12 Set A/D data flow result=40
06:01:12 Set A/D channel type result=40
06:01:12 Set A/D encoding result=40
06:01:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:12 Set channel filter=0.000000e+000  result=40
06:01:12 Config A/D  Result=40
06:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:12 Get A/D filter: -9.255963e+061  result=40
06:01:12 Get A/D value=-858993460  result=40
06:01:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:12 Parameters OK
06:01:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:12 Set A/D data flow result=40
06:01:12 Set A/D channel type result=40
06:01:12 Set A/D encoding result=40
06:01:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:12 Set channel filter=0.000000e+000  result=40
06:01:12 Config A/D  Result=40
06:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:12 Get A/D filter: -9.255963e+061  result=40
06:01:12 Get A/D value=-858993460  result=40
06:01:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:01:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:01:12 Aux=
06:01:12 Message to Camera, serial 183989 queued
06:01:49 Received message from Master: op=PointingHead serial=184002
06:01:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:01:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:01:49 Point started: ret=0
06:01:49 point_skyscan result=0
06:01:50 Check angles
06:01:50 SkyScan query
06:01:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:01:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:01:51 Message to Master queued w/err=0: serial=184002 error=0
06:01:56 Received message from Master: op=Filter serial=184003
06:01:56 Color wheel filter change from 0 to 0
06:01:56 FLIGetFilterPos err=0  currentPosition=0
06:01:56 FLIGetStepsRemaining err=0  RemainingSteps=0
06:01:56 Filter is already there-color wheel unchanged
06:01:56 Received message from Master: op=Shutter serial=184004
06:01:56 Shutter LASER close
06:01:56 Received message from Camera: op=State serial=184006
06:01:56 GetSingleValue result=40  Value=cccccccc
06:01:56 SkyScan query
06:01:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:56 Parameters OK
06:01:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:56 Set A/D data flow result=40
06:01:56 Set A/D channel type result=40
06:01:56 Set A/D encoding result=40
06:01:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:56 Set channel filter=0.000000e+000  result=40
06:01:56 Config A/D  Result=40
06:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:56 Get A/D filter: -9.255963e+061  result=40
06:01:56 Get A/D value=-858993460  result=40
06:01:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:01:56 Parameters OK
06:01:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:01:56 Set A/D data flow result=40
06:01:56 Set A/D channel type result=40
06:01:56 Set A/D encoding result=40
06:01:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:01:56 Set channel filter=0.000000e+000  result=40
06:01:56 Config A/D  Result=40
06:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:01:56 Get A/D filter: -9.255963e+061  result=40
06:01:56 Get A/D value=-858993460  result=40
06:01:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:01:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:01:56 Aux=
06:01:56 Message to Camera, serial 184006 queued
06:02:33 Received message from Master: op=PointingHead serial=184019
06:02:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:02:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:02:34 Point started: ret=0
06:02:34 point_skyscan result=0
06:02:34 Check angles
06:02:34 SkyScan query
06:02:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:02:35 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:02:35 Message to Master queued w/err=0: serial=184019 error=0
06:02:40 Received message from Master: op=Filter serial=184020
06:02:40 Color wheel filter change from 0 to 0
06:02:40 FLIGetFilterPos err=0  currentPosition=0
06:02:40 FLIGetStepsRemaining err=0  RemainingSteps=0
06:02:40 Filter is already there-color wheel unchanged
06:02:40 Received message from Master: op=Shutter serial=184021
06:02:40 Shutter LASER close
06:02:40 Received message from Camera: op=State serial=184023
06:02:40 GetSingleValue result=40  Value=cccccccc
06:02:40 SkyScan query
06:02:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:02:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:02:41 Parameters OK
06:02:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:02:41 Set A/D data flow result=40
06:02:41 Set A/D channel type result=40
06:02:41 Set A/D encoding result=40
06:02:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:02:41 Set channel filter=0.000000e+000  result=40
06:02:41 Config A/D  Result=40
06:02:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:02:41 Get A/D filter: -9.255963e+061  result=40
06:02:41 Get A/D value=-858993460  result=40
06:02:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:02:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:02:41 Parameters OK
06:02:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:02:41 Set A/D data flow result=40
06:02:41 Set A/D channel type result=40
06:02:41 Set A/D encoding result=40
06:02:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:02:41 Set channel filter=0.000000e+000  result=40
06:02:41 Config A/D  Result=40
06:02:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:02:41 Get A/D filter: -9.255963e+061  result=40
06:02:41 Get A/D value=-858993460  result=40
06:02:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:02:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:02:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:02:41 Aux=
06:02:41 Message to Camera, serial 184023 queued
06:03:18 Received message from Master: op=PointingHead serial=184036
06:03:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:03:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:03:18 Point started: ret=0
06:03:18 point_skyscan result=0
06:03:19 Check angles
06:03:19 SkyScan query
06:03:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:03:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:03:19 Message to Master queued w/err=0: serial=184036 error=0
06:03:24 Received message from Master: op=Filter serial=184037
06:03:24 Color wheel filter change from 0 to 0
06:03:24 FLIGetFilterPos err=0  currentPosition=0
06:03:24 FLIGetStepsRemaining err=0  RemainingSteps=0
06:03:24 Filter is already there-color wheel unchanged
06:03:25 Received message from Master: op=Shutter serial=184038
06:03:25 Shutter LASER close
06:03:25 Received message from Camera: op=State serial=184040
06:03:25 GetSingleValue result=40  Value=cccccccc
06:03:25 SkyScan query
06:03:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:03:25 Parameters OK
06:03:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:03:25 Set A/D data flow result=40
06:03:25 Set A/D channel type result=40
06:03:25 Set A/D encoding result=40
06:03:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:03:25 Set channel filter=0.000000e+000  result=40
06:03:25 Config A/D  Result=40
06:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:03:25 Get A/D filter: -9.255963e+061  result=40
06:03:25 Get A/D value=-858993460  result=40
06:03:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:03:25 Parameters OK
06:03:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:03:25 Set A/D data flow result=40
06:03:25 Set A/D channel type result=40
06:03:25 Set A/D encoding result=40
06:03:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:03:25 Set channel filter=0.000000e+000  result=40
06:03:25 Config A/D  Result=40
06:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:03:25 Get A/D filter: -9.255963e+061  result=40
06:03:25 Get A/D value=-858993460  result=40
06:03:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:03:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:03:25 Aux=
06:03:25 Message to Camera, serial 184040 queued
06:03:36 Received message from Master: op=Identify serial=184041
[UTC 2019-3-9  06:03:48]
06:04:02 Received message from Master: op=PointingHead serial=184056
06:04:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:04:02 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:04:02 Point started: ret=0
06:04:02 point_skyscan result=0
06:04:03 Check angles
06:04:03 SkyScan query
06:04:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.82<-13588  Statuses=0008 0009
06:04:04 Msec=0  True Az=112.995  Ze=-23.82  Az status=0008  Ze status=0009
06:04:04 Check angles
06:04:04 SkyScan query
06:04:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.775<-14985  Statuses=0008 0009
06:04:04 Msec=750  True Az=112.995  Ze=-44.775  Az status=0008  Ze status=0009
06:04:05 Check angles
06:04:05 SkyScan query
06:04:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.715<-16381  Statuses=0008 0009
06:04:05 Msec=1500  True Az=112.995  Ze=-65.715  Az status=0008  Ze status=0009
06:04:05 Check angles
06:04:05 SkyScan query
06:04:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.105<-17807  Statuses=0008 0009
06:04:06 Msec=2250  True Az=112.995  Ze=-87.105  Az status=0008  Ze status=0009
06:04:06 Check angles
06:04:06 SkyScan query
06:04:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.06<-19204  Statuses=0008 0009
06:04:07 Msec=3000  True Az=112.995  Ze=-108.06  Az status=0008  Ze status=0009
06:04:07 Check angles
06:04:07 SkyScan query
06:04:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-129<-20600  Statuses=0008 0009
06:04:07 Msec=3750  True Az=112.995  Ze=-129  Az status=0008  Ze status=0009
06:04:08 Check angles
06:04:08 SkyScan query
06:04:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.405<-22027  Statuses=0008 0009
06:04:08 Msec=4500  True Az=112.995  Ze=-150.405  Az status=0008  Ze status=0009
06:04:08 Check angles
06:04:08 SkyScan query
06:04:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.495<-23433  Statuses=0008 0009
06:04:09 Msec=5250  True Az=112.995  Ze=-171.495  Az status=0008  Ze status=0009
06:04:09 Check angles
06:04:09 SkyScan query
06:04:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:04:10 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:04:10 Message to Master queued w/err=0: serial=184056 error=0
06:04:15 Received message from Master: op=Filter serial=184057
06:04:15 Color wheel filter change from 0 to 0
06:04:15 FLIGetFilterPos err=0  currentPosition=0
06:04:15 FLIGetStepsRemaining err=0  RemainingSteps=0
06:04:15 Filter is already there-color wheel unchanged
06:04:15 Received message from Master: op=Shutter serial=184058
06:04:15 Shutter LASER open
06:04:15 Received message from Camera: op=State serial=184060
06:04:15 GetSingleValue result=40  Value=cccccccc
06:04:15 SkyScan query
06:04:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:04:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:04:16 Parameters OK
06:04:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:04:16 Set A/D data flow result=40
06:04:16 Set A/D channel type result=40
06:04:16 Set A/D encoding result=40
06:04:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:04:16 Set channel filter=0.000000e+000  result=40
06:04:16 Config A/D  Result=40
06:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:04:16 Get A/D filter: -9.255963e+061  result=40
06:04:16 Get A/D value=-858993460  result=40
06:04:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:04:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:04:16 Parameters OK
06:04:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:04:16 Set A/D data flow result=40
06:04:16 Set A/D channel type result=40
06:04:16 Set A/D encoding result=40
06:04:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:04:16 Set channel filter=0.000000e+000  result=40
06:04:16 Config A/D  Result=40
06:04:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:04:16 Get A/D filter: -9.255963e+061  result=40
06:04:16 Get A/D value=-858993460  result=40
06:04:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:04:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:04:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:04:16 Aux=
06:04:16 Message to Camera, serial 184060 queued
06:04:24 Received message from Master: op=Shutter serial=184070
06:04:24 Shutter LASER close
06:04:25 Received message from Master: op=PointingHead serial=184074
06:04:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:04:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:04:25 Point started: ret=0
06:04:25 point_skyscan result=0
06:04:26 Check angles
06:04:26 SkyScan query
06:04:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.43<-21562  Statuses=0008 0009
06:04:26 Msec=0  True Az=112.995  Ze=-143.43  Az status=0008  Ze status=0009
06:04:27 Check angles
06:04:27 SkyScan query
06:04:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.49<-20166  Statuses=0008 0009
06:04:27 Msec=750  True Az=112.995  Ze=-122.49  Az status=0008  Ze status=0009
06:04:27 Check angles
06:04:27 SkyScan query
06:04:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.085<-18739  Statuses=0008 0009
06:04:28 Msec=1500  True Az=112.995  Ze=-101.085  Az status=0008  Ze status=0009
06:04:28 Check angles
06:04:28 SkyScan query
06:04:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
06:04:29 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
06:04:29 Check angles
06:04:29 SkyScan query
06:04:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.19<-15946  Statuses=0008 0009
06:04:29 Msec=3000  True Az=112.995  Ze=-59.19  Az status=0008  Ze status=0009
06:04:30 Check angles
06:04:30 SkyScan query
06:04:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.785<-14519  Statuses=0008 0009
06:04:30 Msec=3750  True Az=112.995  Ze=-37.785  Az status=0008  Ze status=0009
06:04:30 Check angles
06:04:30 SkyScan query
06:04:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.365<-13091  Statuses=0008 0009
06:04:31 Msec=4500  True Az=112.995  Ze=-16.365  Az status=0008  Ze status=0009
06:04:31 Check angles
06:04:31 SkyScan query
06:04:32 SkyScan query done: ret=0  az=112.995<-7533  ze=4.47<-11702  Statuses=0008 0009
06:04:32 Msec=5250  True Az=112.995  Ze=4.47  Az status=0008  Ze status=0009
06:04:32 Check angles
06:04:32 SkyScan query
06:04:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:04:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:04:32 Message to Master queued w/err=0: serial=184074 error=0
06:04:37 Received message from Master: op=Filter serial=184075
06:04:37 Color wheel filter change from 0 to 0
06:04:37 FLIGetFilterPos err=0  currentPosition=0
06:04:37 FLIGetStepsRemaining err=0  RemainingSteps=0
06:04:37 Filter is already there-color wheel unchanged
06:04:38 Received message from Master: op=Shutter serial=184076
06:04:38 Shutter LASER close
06:04:38 Received message from Camera: op=State serial=184078
06:04:38 GetSingleValue result=40  Value=cccccccc
06:04:38 SkyScan query
06:04:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:04:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:04:38 Parameters OK
06:04:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:04:38 Set A/D data flow result=40
06:04:38 Set A/D channel type result=40
06:04:38 Set A/D encoding result=40
06:04:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:04:38 Set channel filter=0.000000e+000  result=40
06:04:38 Config A/D  Result=40
06:04:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:04:38 Get A/D filter: -9.255963e+061  result=40
06:04:38 Get A/D value=-858993460  result=40
06:04:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:04:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:04:38 Parameters OK
06:04:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:04:38 Set A/D data flow result=40
06:04:38 Set A/D channel type result=40
06:04:38 Set A/D encoding result=40
06:04:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:04:38 Set channel filter=0.000000e+000  result=40
06:04:38 Config A/D  Result=40
06:04:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:04:38 Get A/D filter: -9.255963e+061  result=40
06:04:38 Get A/D value=-858993460  result=40
06:04:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:04:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:04:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:04:38 Aux=
06:04:38 Message to Camera, serial 184078 queued
06:05:15 Received message from Master: op=PointingHead serial=184091
06:05:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:05:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:05:15 Point started: ret=0
06:05:15 point_skyscan result=0
06:05:16 Check angles
06:05:16 SkyScan query
06:05:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:05:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:05:17 Message to Master queued w/err=0: serial=184091 error=0
06:05:22 Received message from Master: op=Filter serial=184092
06:05:22 Color wheel filter change from 0 to 0
06:05:22 FLIGetFilterPos err=0  currentPosition=0
06:05:22 FLIGetStepsRemaining err=0  RemainingSteps=0
06:05:22 Filter is already there-color wheel unchanged
06:05:22 Received message from Master: op=Shutter serial=184093
06:05:22 Shutter LASER close
06:05:22 Received message from Camera: op=State serial=184095
06:05:22 GetSingleValue result=40  Value=cccccccc
06:05:22 SkyScan query
06:05:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:05:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:05:23 Parameters OK
06:05:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:05:23 Set A/D data flow result=40
06:05:23 Set A/D channel type result=40
06:05:23 Set A/D encoding result=40
06:05:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:05:23 Set channel filter=0.000000e+000  result=40
06:05:23 Config A/D  Result=40
06:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:05:23 Get A/D filter: -9.255963e+061  result=40
06:05:23 Get A/D value=-858993460  result=40
06:05:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:05:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:05:23 Parameters OK
06:05:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:05:23 Set A/D data flow result=40
06:05:23 Set A/D channel type result=40
06:05:23 Set A/D encoding result=40
06:05:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:05:23 Set channel filter=0.000000e+000  result=40
06:05:23 Config A/D  Result=40
06:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:05:23 Get A/D filter: -9.255963e+061  result=40
06:05:23 Get A/D value=-858993460  result=40
06:05:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:05:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:05:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:05:23 Aux=
06:05:23 Message to Camera, serial 184095 queued
06:05:59 Received message from Master: op=PointingHead serial=184108
06:05:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:05:59 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:06:00 Point started: ret=0
06:06:00 point_skyscan result=0
06:06:01 Check angles
06:06:01 SkyScan query
06:06:01 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
06:06:01 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
06:06:01 Check angles
06:06:01 SkyScan query
06:06:02 SkyScan query done: ret=0  az=154.125<-10275  ze=-6.495<-12433  Statuses=0009 0008
06:06:02 Msec=750  True Az=154.125  Ze=-6.495  Az status=0009  Ze status=0008
06:06:02 Check angles
06:06:02 SkyScan query
06:06:03 SkyScan query done: ret=0  az=171.555<-11437  ze=-6.495<-12433  Statuses=0009 0008
06:06:03 Msec=1500  True Az=171.555  Ze=-6.495  Az status=0009  Ze status=0008
06:06:03 Check angles
06:06:03 SkyScan query
06:06:03 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:06:03 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:06:03 Message to Master queued w/err=0: serial=184108 error=0
06:06:08 Received message from Master: op=Filter serial=184109
06:06:08 Color wheel filter change from 0 to 0
06:06:08 FLIGetFilterPos err=0  currentPosition=0
06:06:08 FLIGetStepsRemaining err=0  RemainingSteps=0
06:06:08 Filter is already there-color wheel unchanged
06:06:09 Received message from Master: op=Shutter serial=184110
06:06:09 Shutter LASER close
06:06:09 Received message from Camera: op=State serial=184112
06:06:09 GetSingleValue result=40  Value=cccccccc
06:06:09 SkyScan query
06:06:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:06:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:06:09 Parameters OK
06:06:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:06:09 Set A/D data flow result=40
06:06:09 Set A/D channel type result=40
06:06:09 Set A/D encoding result=40
06:06:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:06:09 Set channel filter=0.000000e+000  result=40
06:06:09 Config A/D  Result=40
06:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:06:09 Get A/D filter: -9.255963e+061  result=40
06:06:09 Get A/D value=-858993460  result=40
06:06:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:06:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:06:09 Parameters OK
06:06:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:06:09 Set A/D data flow result=40
06:06:09 Set A/D channel type result=40
06:06:09 Set A/D encoding result=40
06:06:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:06:09 Set channel filter=0.000000e+000  result=40
06:06:09 Config A/D  Result=40
06:06:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:06:09 Get A/D filter: -9.255963e+061  result=40
06:06:09 Get A/D value=-858993460  result=40
06:06:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:06:09 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:06:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:06:09 Aux=
06:06:09 Message to Camera, serial 184112 queued
06:06:46 Received message from Master: op=PointingHead serial=184125
06:06:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:06:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:06:46 Point started: ret=0
06:06:46 point_skyscan result=0
06:06:47 Check angles
06:06:47 SkyScan query
06:06:48 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
06:06:48 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
06:06:48 Check angles
06:06:48 SkyScan query
06:06:48 SkyScan query done: ret=0  az=135.33<-9022  ze=6.495<-11567  Statuses=0009 0008
06:06:48 Msec=750  True Az=135.33  Ze=6.495  Az status=0009  Ze status=0008
06:06:49 Check angles
06:06:49 SkyScan query
06:06:49 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
06:06:49 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
06:06:49 Check angles
06:06:49 SkyScan query
06:06:50 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
06:06:50 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
06:06:50 Message to Master queued w/err=0: serial=184125 error=0
06:06:55 Received message from Master: op=Filter serial=184126
06:06:55 Color wheel filter change from 0 to 0
06:06:55 FLIGetFilterPos err=0  currentPosition=0
06:06:55 FLIGetStepsRemaining err=0  RemainingSteps=0
06:06:55 Filter is already there-color wheel unchanged
06:06:55 Received message from Master: op=Shutter serial=184127
06:06:55 Shutter LASER close
06:06:55 Received message from Camera: op=State serial=184129
06:06:55 GetSingleValue result=40  Value=cccccccc
06:06:55 SkyScan query
06:06:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:06:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:06:56 Parameters OK
06:06:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:06:56 Set A/D data flow result=40
06:06:56 Set A/D channel type result=40
06:06:56 Set A/D encoding result=40
06:06:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:06:56 Set channel filter=0.000000e+000  result=40
06:06:56 Config A/D  Result=40
06:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:06:56 Get A/D filter: -9.255963e+061  result=40
06:06:56 Get A/D value=-858993460  result=40
06:06:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:06:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:06:56 Parameters OK
06:06:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:06:56 Set A/D data flow result=40
06:06:56 Set A/D channel type result=40
06:06:56 Set A/D encoding result=40
06:06:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:06:56 Set channel filter=0.000000e+000  result=40
06:06:56 Config A/D  Result=40
06:06:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:06:56 Get A/D filter: -9.255963e+061  result=40
06:06:56 Get A/D value=-858993460  result=40
06:06:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:06:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:06:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:06:56 Aux=
06:06:56 Message to Camera, serial 184129 queued
06:07:33 Received message from Master: op=PointingHead serial=184142
06:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:07:33 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:07:33 Point started: ret=0
06:07:33 point_skyscan result=0
06:07:34 Check angles
06:07:34 SkyScan query
06:07:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
06:07:34 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
06:07:35 Check angles
06:07:35 SkyScan query
06:07:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.1<-14940  Statuses=0008 0009
06:07:35 Msec=750  True Az=112.995  Ze=-44.1  Az status=0008  Ze status=0009
06:07:35 Check angles
06:07:35 SkyScan query
06:07:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.04<-16336  Statuses=0008 0009
06:07:36 Msec=1500  True Az=112.995  Ze=-65.04  Az status=0008  Ze status=0009
06:07:36 Check angles
06:07:36 SkyScan query
06:07:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.01<-17734  Statuses=0008 0009
06:07:37 Msec=2250  True Az=112.995  Ze=-86.01  Az status=0008  Ze status=0009
06:07:37 Check angles
06:07:37 SkyScan query
06:07:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.95<-19130  Statuses=0008 0009
06:07:37 Msec=3000  True Az=112.995  Ze=-106.95  Az status=0008  Ze status=0009
06:07:38 Check angles
06:07:38 SkyScan query
06:07:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.905<-20527  Statuses=0008 0009
06:07:38 Msec=3750  True Az=112.995  Ze=-127.905  Az status=0008  Ze status=0009
06:07:38 Check angles
06:07:38 SkyScan query
06:07:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.86<-21924  Statuses=0008 0009
06:07:39 Msec=4500  True Az=112.995  Ze=-148.86  Az status=0008  Ze status=0009
06:07:39 Check angles
06:07:39 SkyScan query
06:07:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.8<-23320  Statuses=0008 0009
06:07:40 Msec=5250  True Az=112.995  Ze=-169.8  Az status=0008  Ze status=0009
06:07:40 Check angles
06:07:40 SkyScan query
06:07:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:07:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:07:40 Message to Master queued w/err=0: serial=184142 error=0
06:07:45 Received message from Master: op=Filter serial=184143
06:07:45 Color wheel filter change from 0 to 0
06:07:45 FLIGetFilterPos err=0  currentPosition=0
06:07:45 FLIGetStepsRemaining err=0  RemainingSteps=0
06:07:45 Filter is already there-color wheel unchanged
06:07:46 Received message from Master: op=Shutter serial=184144
06:07:46 Shutter LASER open
06:07:46 Received message from Camera: op=State serial=184146
06:07:46 GetSingleValue result=40  Value=cccccccc
06:07:46 SkyScan query
06:07:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:07:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:07:46 Parameters OK
06:07:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:07:46 Set A/D data flow result=40
06:07:46 Set A/D channel type result=40
06:07:46 Set A/D encoding result=40
06:07:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:07:46 Set channel filter=0.000000e+000  result=40
06:07:46 Config A/D  Result=40
06:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:07:46 Get A/D filter: -9.255963e+061  result=40
06:07:46 Get A/D value=-858993460  result=40
06:07:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:07:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:07:46 Parameters OK
06:07:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:07:46 Set A/D data flow result=40
06:07:46 Set A/D channel type result=40
06:07:46 Set A/D encoding result=40
06:07:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:07:46 Set channel filter=0.000000e+000  result=40
06:07:46 Config A/D  Result=40
06:07:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:07:46 Get A/D filter: -9.255963e+061  result=40
06:07:46 Get A/D value=-858993460  result=40
06:07:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:07:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:07:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:07:46 Aux=
06:07:46 Message to Camera, serial 184146 queued
06:07:55 Received message from Master: op=Shutter serial=184156
06:07:55 Shutter LASER close
06:07:55 Received message from Master: op=PointingHead serial=184160
06:07:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:07:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:07:56 Point started: ret=0
06:07:56 point_skyscan result=0
06:07:56 Check angles
06:07:56 SkyScan query
06:07:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.25<-21550  Statuses=0008 0009
06:07:57 Msec=0  True Az=112.995  Ze=-143.25  Az status=0008  Ze status=0009
06:07:57 Check angles
06:07:57 SkyScan query
06:07:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.295<-20153  Statuses=0008 0009
06:07:58 Msec=750  True Az=112.995  Ze=-122.295  Az status=0008  Ze status=0009
06:07:58 Check angles
06:07:58 SkyScan query
06:07:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.355<-18757  Statuses=0008 0009
06:07:58 Msec=1500  True Az=112.995  Ze=-101.355  Az status=0008  Ze status=0009
06:07:59 Check angles
06:07:59 SkyScan query
06:07:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.98<-17332  Statuses=0008 0009
06:07:59 Msec=2250  True Az=112.995  Ze=-79.98  Az status=0008  Ze status=0009
06:07:59 Check angles
06:07:59 SkyScan query
06:08:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
06:08:00 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
06:08:00 Check angles
06:08:00 SkyScan query
06:08:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.025<-14535  Statuses=0008 0009
06:08:01 Msec=3750  True Az=112.995  Ze=-38.025  Az status=0008  Ze status=0009
06:08:01 Check angles
06:08:01 SkyScan query
06:08:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.62<-13108  Statuses=0008 0009
06:08:01 Msec=4500  True Az=112.995  Ze=-16.62  Az status=0008  Ze status=0009
06:08:02 Check angles
06:08:02 SkyScan query
06:08:02 SkyScan query done: ret=0  az=112.995<-7533  ze=4.605<-11693  Statuses=0008 0009
06:08:02 Msec=5250  True Az=112.995  Ze=4.605  Az status=0008  Ze status=0009
06:08:02 Check angles
06:08:02 SkyScan query
06:08:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:08:03 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:08:03 Message to Master queued w/err=0: serial=184160 error=0
06:08:08 Received message from Master: op=Filter serial=184161
06:08:08 Color wheel filter change from 0 to 0
06:08:08 FLIGetFilterPos err=0  currentPosition=0
06:08:08 FLIGetStepsRemaining err=0  RemainingSteps=0
06:08:08 Filter is already there-color wheel unchanged
06:08:08 Received message from Master: op=Shutter serial=184162
06:08:08 Shutter LASER close
06:08:08 Received message from Camera: op=State serial=184164
06:08:08 GetSingleValue result=40  Value=cccccccc
06:08:08 SkyScan query
06:08:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:08:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:09 Parameters OK
06:08:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:09 Set A/D data flow result=40
06:08:09 Set A/D channel type result=40
06:08:09 Set A/D encoding result=40
06:08:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:09 Set channel filter=0.000000e+000  result=40
06:08:09 Config A/D  Result=40
06:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:09 Get A/D filter: -9.255963e+061  result=40
06:08:09 Get A/D value=-858993460  result=40
06:08:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:09 Parameters OK
06:08:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:09 Set A/D data flow result=40
06:08:09 Set A/D channel type result=40
06:08:09 Set A/D encoding result=40
06:08:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:09 Set channel filter=0.000000e+000  result=40
06:08:09 Config A/D  Result=40
06:08:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:09 Get A/D filter: -9.255963e+061  result=40
06:08:09 Get A/D value=-858993460  result=40
06:08:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:08:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:08:09 Aux=
06:08:09 Message to Camera, serial 184164 queued
06:08:46 Received message from Master: op=PointingHead serial=184177
06:08:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:08:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:08:46 Point started: ret=0
06:08:46 point_skyscan result=0
06:08:47 Check angles
06:08:47 SkyScan query
06:08:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:08:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:08:47 Message to Master queued w/err=0: serial=184177 error=0
06:08:52 Received message from Master: op=Filter serial=184178
06:08:52 Color wheel filter change from 0 to 0
06:08:52 FLIGetFilterPos err=0  currentPosition=0
06:08:52 FLIGetStepsRemaining err=0  RemainingSteps=0
06:08:52 Filter is already there-color wheel unchanged
06:08:52 Received message from Master: op=Shutter serial=184179
06:08:52 Shutter LASER close
06:08:53 Received message from Camera: op=State serial=184181
06:08:53 GetSingleValue result=40  Value=cccccccc
06:08:53 SkyScan query
06:08:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:08:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:53 Parameters OK
06:08:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:53 Set A/D data flow result=40
06:08:53 Set A/D channel type result=40
06:08:53 Set A/D encoding result=40
06:08:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:53 Set channel filter=0.000000e+000  result=40
06:08:53 Config A/D  Result=40
06:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:53 Get A/D filter: -9.255963e+061  result=40
06:08:53 Get A/D value=-858993460  result=40
06:08:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:08:53 Parameters OK
06:08:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:08:53 Set A/D data flow result=40
06:08:53 Set A/D channel type result=40
06:08:53 Set A/D encoding result=40
06:08:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:08:53 Set channel filter=0.000000e+000  result=40
06:08:53 Config A/D  Result=40
06:08:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:08:53 Get A/D filter: -9.255963e+061  result=40
06:08:53 Get A/D value=-858993460  result=40
06:08:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:08:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:08:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:08:53 Aux=
06:08:53 Message to Camera, serial 184181 queued
06:09:30 Received message from Master: op=PointingHead serial=184194
06:09:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:09:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:09:30 Point started: ret=0
06:09:30 point_skyscan result=0
06:09:31 Check angles
06:09:31 SkyScan query
06:09:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:09:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:09:32 Message to Master queued w/err=0: serial=184194 error=0
06:09:37 Received message from Master: op=Filter serial=184195
06:09:37 Color wheel filter change from 0 to 0
06:09:37 FLIGetFilterPos err=0  currentPosition=0
06:09:37 FLIGetStepsRemaining err=0  RemainingSteps=0
06:09:37 Filter is already there-color wheel unchanged
06:09:37 Received message from Master: op=Shutter serial=184196
06:09:37 Shutter LASER close
06:09:37 Received message from Camera: op=State serial=184198
06:09:37 GetSingleValue result=40  Value=cccccccc
06:09:37 SkyScan query
06:09:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:09:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:09:37 Parameters OK
06:09:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:09:37 Set A/D data flow result=40
06:09:37 Set A/D channel type result=40
06:09:37 Set A/D encoding result=40
06:09:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:09:37 Set channel filter=0.000000e+000  result=40
06:09:37 Config A/D  Result=40
06:09:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:09:37 Get A/D filter: -9.255963e+061  result=40
06:09:37 Get A/D value=-858993460  result=40
06:09:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:09:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:09:37 Parameters OK
06:09:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:09:37 Set A/D data flow result=40
06:09:37 Set A/D channel type result=40
06:09:37 Set A/D encoding result=40
06:09:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:09:37 Set channel filter=0.000000e+000  result=40
06:09:37 Config A/D  Result=40
06:09:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:09:37 Get A/D filter: -9.255963e+061  result=40
06:09:37 Get A/D value=-858993460  result=40
06:09:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:09:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:09:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:09:37 Aux=
06:09:37 Message to Camera, serial 184198 queued
06:10:14 Received message from Master: op=PointingHead serial=184211
06:10:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:10:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:10:15 Point started: ret=0
06:10:15 point_skyscan result=0
06:10:15 Check angles
06:10:15 SkyScan query
06:10:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:10:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:10:16 Message to Master queued w/err=0: serial=184211 error=0
06:10:21 Received message from Master: op=Filter serial=184212
06:10:21 Color wheel filter change from 0 to 0
06:10:21 FLIGetFilterPos err=0  currentPosition=0
06:10:21 FLIGetStepsRemaining err=0  RemainingSteps=0
06:10:21 Filter is already there-color wheel unchanged
06:10:21 Received message from Master: op=Shutter serial=184213
06:10:21 Shutter LASER close
06:10:21 Received message from Camera: op=State serial=184215
06:10:21 GetSingleValue result=40  Value=cccccccc
06:10:21 SkyScan query
06:10:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:10:22 Parameters OK
06:10:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:10:22 Set A/D data flow result=40
06:10:22 Set A/D channel type result=40
06:10:22 Set A/D encoding result=40
06:10:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:10:22 Set channel filter=0.000000e+000  result=40
06:10:22 Config A/D  Result=40
06:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:10:22 Get A/D filter: -9.255963e+061  result=40
06:10:22 Get A/D value=-858993460  result=40
06:10:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:10:22 Parameters OK
06:10:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:10:22 Set A/D data flow result=40
06:10:22 Set A/D channel type result=40
06:10:22 Set A/D encoding result=40
06:10:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:10:22 Set channel filter=0.000000e+000  result=40
06:10:22 Config A/D  Result=40
06:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:10:22 Get A/D filter: -9.255963e+061  result=40
06:10:22 Get A/D value=-858993460  result=40
06:10:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:10:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:10:22 Aux=
06:10:22 Message to Camera, serial 184215 queued
06:10:59 Received message from Master: op=PointingHead serial=184228
06:10:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:10:59 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:10:59 Point started: ret=0
06:10:59 point_skyscan result=0
06:11:00 Check angles
06:11:00 SkyScan query
06:11:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.835<-13589  Statuses=0008 0009
06:11:00 Msec=0  True Az=112.995  Ze=-23.835  Az status=0008  Ze status=0009
06:11:00 Check angles
06:11:00 SkyScan query
06:11:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.225<-15015  Statuses=0008 0009
06:11:01 Msec=750  True Az=112.995  Ze=-45.225  Az status=0008  Ze status=0009
06:11:01 Check angles
06:11:01 SkyScan query
06:11:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.165<-16411  Statuses=0008 0009
06:11:02 Msec=1500  True Az=112.995  Ze=-66.165  Az status=0008  Ze status=0009
06:11:02 Check angles
06:11:02 SkyScan query
06:11:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.12<-17808  Statuses=0008 0009
06:11:02 Msec=2250  True Az=112.995  Ze=-87.12  Az status=0008  Ze status=0009
06:11:03 Check angles
06:11:03 SkyScan query
06:11:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.495<-19233  Statuses=0008 0009
06:11:03 Msec=3000  True Az=112.995  Ze=-108.495  Az status=0008  Ze status=0009
06:11:03 Check angles
06:11:03 SkyScan query
06:11:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.87<-20658  Statuses=0008 0009
06:11:04 Msec=3750  True Az=112.995  Ze=-129.87  Az status=0008  Ze status=0009
06:11:04 Check angles
06:11:04 SkyScan query
06:11:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.84<-22056  Statuses=0008 0009
06:11:05 Msec=4500  True Az=112.995  Ze=-150.84  Az status=0008  Ze status=0009
06:11:05 Check angles
06:11:05 SkyScan query
06:11:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.495<-23433  Statuses=0008 0009
06:11:06 Msec=5250  True Az=112.995  Ze=-171.495  Az status=0008  Ze status=0009
06:11:06 Check angles
06:11:06 SkyScan query
06:11:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:11:06 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:11:06 Message to Master queued w/err=0: serial=184228 error=0
06:11:11 Received message from Master: op=Filter serial=184229
06:11:11 Color wheel filter change from 0 to 0
06:11:11 FLIGetFilterPos err=0  currentPosition=0
06:11:11 FLIGetStepsRemaining err=0  RemainingSteps=0
06:11:11 Filter is already there-color wheel unchanged
06:11:11 Received message from Master: op=Shutter serial=184230
06:11:11 Shutter LASER open
06:11:12 Received message from Camera: op=State serial=184232
06:11:12 GetSingleValue result=40  Value=cccccccc
06:11:12 SkyScan query
06:11:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:11:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:11:12 Parameters OK
06:11:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:11:12 Set A/D data flow result=40
06:11:12 Set A/D channel type result=40
06:11:12 Set A/D encoding result=40
06:11:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:11:12 Set channel filter=0.000000e+000  result=40
06:11:12 Config A/D  Result=40
06:11:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:11:12 Get A/D filter: -9.255963e+061  result=40
06:11:12 Get A/D value=-858993460  result=40
06:11:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:11:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:11:12 Parameters OK
06:11:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:11:12 Set A/D data flow result=40
06:11:12 Set A/D channel type result=40
06:11:12 Set A/D encoding result=40
06:11:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:11:12 Set channel filter=0.000000e+000  result=40
06:11:12 Config A/D  Result=40
06:11:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:11:12 Get A/D filter: -9.255963e+061  result=40
06:11:12 Get A/D value=-858993460  result=40
06:11:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:11:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:11:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:11:12 Aux=
06:11:12 Message to Camera, serial 184232 queued
06:11:21 Received message from Master: op=Shutter serial=184242
06:11:21 Shutter LASER close
06:11:21 Received message from Master: op=PointingHead serial=184246
06:11:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:11:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:11:22 Point started: ret=0
06:11:22 point_skyscan result=0
06:11:22 Check angles
06:11:22 SkyScan query
06:11:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.95<-21530  Statuses=0008 0009
06:11:23 Msec=0  True Az=112.995  Ze=-142.95  Az status=0008  Ze status=0009
06:11:23 Check angles
06:11:23 SkyScan query
06:11:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.965<-20131  Statuses=0008 0009
06:11:24 Msec=750  True Az=112.995  Ze=-121.965  Az status=0008  Ze status=0009
06:11:24 Check angles
06:11:24 SkyScan query
06:11:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.01<-18734  Statuses=0008 0009
06:11:24 Msec=1500  True Az=112.995  Ze=-101.01  Az status=0008  Ze status=0009
06:11:25 Check angles
06:11:25 SkyScan query
06:11:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.635<-17309  Statuses=0008 0009
06:11:25 Msec=2250  True Az=112.995  Ze=-79.635  Az status=0008  Ze status=0009
06:11:25 Check angles
06:11:25 SkyScan query
06:11:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.215<-15881  Statuses=0008 0009
06:11:26 Msec=3000  True Az=112.995  Ze=-58.215  Az status=0008  Ze status=0009
06:11:26 Check angles
06:11:26 SkyScan query
06:11:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.305<-14487  Statuses=0008 0009
06:11:27 Msec=3750  True Az=112.995  Ze=-37.305  Az status=0008  Ze status=0009
06:11:27 Check angles
06:11:27 SkyScan query
06:11:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.32<-13088  Statuses=0008 0009
06:11:27 Msec=4500  True Az=112.995  Ze=-16.32  Az status=0008  Ze status=0009
06:11:28 Check angles
06:11:28 SkyScan query
06:11:28 SkyScan query done: ret=0  az=112.995<-7533  ze=4.515<-11699  Statuses=0008 0009
06:11:28 Msec=5250  True Az=112.995  Ze=4.515  Az status=0008  Ze status=0009
06:11:28 Check angles
06:11:28 SkyScan query
06:11:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:11:29 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:11:29 Message to Master queued w/err=0: serial=184246 error=0
06:11:34 Received message from Master: op=Filter serial=184247
06:11:34 Color wheel filter change from 0 to 0
06:11:34 FLIGetFilterPos err=0  currentPosition=0
06:11:34 FLIGetStepsRemaining err=0  RemainingSteps=0
06:11:34 Filter is already there-color wheel unchanged
06:11:34 Received message from Master: op=Shutter serial=184248
06:11:34 Shutter LASER close
06:11:34 Received message from Camera: op=State serial=184250
06:11:34 GetSingleValue result=40  Value=cccccccc
06:11:34 SkyScan query
06:11:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:11:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:11:35 Parameters OK
06:11:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:11:35 Set A/D data flow result=40
06:11:35 Set A/D channel type result=40
06:11:35 Set A/D encoding result=40
06:11:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:11:35 Set channel filter=0.000000e+000  result=40
06:11:35 Config A/D  Result=40
06:11:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:11:35 Get A/D filter: -9.255963e+061  result=40
06:11:35 Get A/D value=-858993460  result=40
06:11:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:11:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:11:35 Parameters OK
06:11:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:11:35 Set A/D data flow result=40
06:11:35 Set A/D channel type result=40
06:11:35 Set A/D encoding result=40
06:11:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:11:35 Set channel filter=0.000000e+000  result=40
06:11:35 Config A/D  Result=40
06:11:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:11:35 Get A/D filter: -9.255963e+061  result=40
06:11:35 Get A/D value=-858993460  result=40
06:11:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:11:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:11:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:11:35 Aux=
06:11:35 Message to Camera, serial 184250 queued
06:12:12 Received message from Master: op=PointingHead serial=184263
06:12:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:12:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:12:12 Point started: ret=0
06:12:12 point_skyscan result=0
06:12:13 Check angles
06:12:13 SkyScan query
06:12:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:12:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:12:13 Message to Master queued w/err=0: serial=184263 error=0
06:12:18 Received message from Master: op=Filter serial=184264
06:12:18 Color wheel filter change from 0 to 0
06:12:18 FLIGetFilterPos err=0  currentPosition=0
06:12:18 FLIGetStepsRemaining err=0  RemainingSteps=0
06:12:18 Filter is already there-color wheel unchanged
06:12:19 Received message from Master: op=Shutter serial=184265
06:12:19 Shutter LASER close
06:12:19 Received message from Camera: op=State serial=184267
06:12:19 GetSingleValue result=40  Value=cccccccc
06:12:19 SkyScan query
06:12:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:12:19 Parameters OK
06:12:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:12:19 Set A/D data flow result=40
06:12:19 Set A/D channel type result=40
06:12:19 Set A/D encoding result=40
06:12:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:12:19 Set channel filter=0.000000e+000  result=40
06:12:19 Config A/D  Result=40
06:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:12:19 Get A/D filter: -9.255963e+061  result=40
06:12:19 Get A/D value=-858993460  result=40
06:12:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:12:19 Parameters OK
06:12:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:12:19 Set A/D data flow result=40
06:12:19 Set A/D channel type result=40
06:12:19 Set A/D encoding result=40
06:12:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:12:19 Set channel filter=0.000000e+000  result=40
06:12:19 Config A/D  Result=40
06:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:12:19 Get A/D filter: -9.255963e+061  result=40
06:12:19 Get A/D value=-858993460  result=40
06:12:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:12:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:12:19 Aux=
06:12:19 Message to Camera, serial 184267 queued
06:12:56 Received message from Master: op=PointingHead serial=184280
06:12:56 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:12:56 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:12:56 Point started: ret=0
06:12:56 point_skyscan result=0
06:12:57 Check angles
06:12:57 SkyScan query
06:12:58 SkyScan query done: ret=0  az=136.26<-9084  ze=-6.51<-12434  Statuses=0009 0008
06:12:58 Msec=0  True Az=136.26  Ze=-6.51  Az status=0009  Ze status=0008
06:12:58 Check angles
06:12:58 SkyScan query
06:12:58 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
06:12:58 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
06:12:59 Check angles
06:12:59 SkyScan query
06:12:59 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.495<-12433  Statuses=0009 0008
06:12:59 Msec=1500  True Az=171.3  Ze=-6.495  Az status=0009  Ze status=0008
06:12:59 Check angles
06:12:59 SkyScan query
06:13:00 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:13:00 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:13:00 Message to Master queued w/err=0: serial=184280 error=0
06:13:05 Received message from Master: op=Filter serial=184281
06:13:05 Color wheel filter change from 0 to 0
06:13:05 FLIGetFilterPos err=0  currentPosition=0
06:13:05 FLIGetStepsRemaining err=0  RemainingSteps=0
06:13:05 Filter is already there-color wheel unchanged
06:13:05 Received message from Master: op=Shutter serial=184282
06:13:05 Shutter LASER close
06:13:05 Received message from Camera: op=State serial=184284
06:13:05 GetSingleValue result=40  Value=cccccccc
06:13:05 SkyScan query
06:13:06 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:13:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:13:06 Parameters OK
06:13:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:13:06 Set A/D data flow result=40
06:13:06 Set A/D channel type result=40
06:13:06 Set A/D encoding result=40
06:13:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:13:06 Set channel filter=0.000000e+000  result=40
06:13:06 Config A/D  Result=40
06:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:13:06 Get A/D filter: -9.255963e+061  result=40
06:13:06 Get A/D value=-858993460  result=40
06:13:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:13:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:13:06 Parameters OK
06:13:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:13:06 Set A/D data flow result=40
06:13:06 Set A/D channel type result=40
06:13:06 Set A/D encoding result=40
06:13:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:13:06 Set channel filter=0.000000e+000  result=40
06:13:06 Config A/D  Result=40
06:13:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:13:06 Get A/D filter: -9.255963e+061  result=40
06:13:06 Get A/D value=-858993460  result=40
06:13:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:13:06 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:13:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:13:06 Aux=
06:13:06 Message to Camera, serial 184284 queued
06:13:42 Received message from Master: op=PointingHead serial=184296
06:13:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:13:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:13:42 Point started: ret=0
06:13:42 point_skyscan result=0
06:13:43 Check angles
06:13:43 SkyScan query
06:13:43 SkyScan query done: ret=0  az=153.24<-10216  ze=6.51<-11566  Statuses=0009 0008
06:13:43 Msec=0  True Az=153.24  Ze=6.51  Az status=0009  Ze status=0008
06:13:43 Check angles
06:13:43 SkyScan query
06:13:44 SkyScan query done: ret=0  az=135.765<-9051  ze=6.495<-11567  Statuses=0009 0008
06:13:44 Msec=750  True Az=135.765  Ze=6.495  Az status=0009  Ze status=0008
06:13:44 Check angles
06:13:44 SkyScan query
06:13:45 SkyScan query done: ret=0  az=118.215<-7881  ze=6.495<-11567  Statuses=0009 0008
06:13:45 Msec=1500  True Az=118.215  Ze=6.495  Az status=0009  Ze status=0008
06:13:45 Check angles
06:13:45 SkyScan query
06:13:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:13:46 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:13:46 Message to Master queued w/err=0: serial=184296 error=0
06:13:51 Received message from Master: op=Filter serial=184297
06:13:51 Color wheel filter change from 0 to 0
06:13:51 FLIGetFilterPos err=0  currentPosition=0
06:13:51 FLIGetStepsRemaining err=0  RemainingSteps=0
06:13:51 Filter is already there-color wheel unchanged
06:13:51 Received message from Master: op=Shutter serial=184298
06:13:51 Shutter LASER close
06:13:51 Received message from Camera: op=State serial=184300
06:13:51 GetSingleValue result=40  Value=cccccccc
06:13:51 SkyScan query
06:13:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:13:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:13:51 Parameters OK
06:13:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:13:51 Set A/D data flow result=40
06:13:51 Set A/D channel type result=40
06:13:51 Set A/D encoding result=40
06:13:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:13:51 Set channel filter=0.000000e+000  result=40
06:13:51 Config A/D  Result=40
06:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:13:51 Get A/D filter: -9.255963e+061  result=40
06:13:51 Get A/D value=-858993460  result=40
06:13:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:13:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:13:51 Parameters OK
06:13:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:13:51 Set A/D data flow result=40
06:13:51 Set A/D channel type result=40
[UTC 2019-3-9  06:13:51]
06:13:51 Set A/D encoding result=40
06:13:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:13:51 Set channel filter=0.000000e+000  result=40
06:13:51 Config A/D  Result=40
06:13:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:13:51 Get A/D filter: -9.255963e+061  result=40
06:13:51 Get A/D value=-858993460  result=40
06:13:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:13:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:13:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:13:51 Aux=
06:13:51 Message to Camera, serial 184300 queued
06:14:28 Received message from Master: op=PointingHead serial=184313
06:14:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:14:28 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:14:29 Point started: ret=0
06:14:29 point_skyscan result=0
06:14:29 Check angles
06:14:29 SkyScan query
06:14:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.22<-13548  Statuses=0008 0009
06:14:30 Msec=0  True Az=112.995  Ze=-23.22  Az status=0008  Ze status=0009
06:14:30 Check angles
06:14:30 SkyScan query
06:14:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.19<-14946  Statuses=0008 0009
06:14:31 Msec=750  True Az=112.995  Ze=-44.19  Az status=0008  Ze status=0009
06:14:31 Check angles
06:14:31 SkyScan query
06:14:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.16<-16344  Statuses=0008 0009
06:14:31 Msec=1500  True Az=112.995  Ze=-65.16  Az status=0008  Ze status=0009
06:14:32 Check angles
06:14:32 SkyScan query
06:14:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.115<-17741  Statuses=0008 0009
06:14:32 Msec=2250  True Az=112.995  Ze=-86.115  Az status=0008  Ze status=0009
06:14:32 Check angles
06:14:32 SkyScan query
06:14:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.49<-19166  Statuses=0008 0009
06:14:33 Msec=3000  True Az=112.995  Ze=-107.49  Az status=0008  Ze status=0009
06:14:33 Check angles
06:14:33 SkyScan query
06:14:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.43<-20562  Statuses=0008 0009
06:14:34 Msec=3750  True Az=112.995  Ze=-128.43  Az status=0008  Ze status=0009
06:14:34 Check angles
06:14:34 SkyScan query
06:14:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.4<-21960  Statuses=0008 0009
06:14:34 Msec=4500  True Az=112.995  Ze=-149.4  Az status=0008  Ze status=0009
06:14:35 Check angles
06:14:35 SkyScan query
06:14:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.715<-23381  Statuses=0008 0009
06:14:35 Msec=5250  True Az=112.995  Ze=-170.715  Az status=0008  Ze status=0009
06:14:35 Check angles
06:14:35 SkyScan query
06:14:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:14:36 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:14:36 Message to Master queued w/err=0: serial=184313 error=0
06:14:41 Received message from Master: op=Filter serial=184314
06:14:41 Color wheel filter change from 0 to 0
06:14:41 FLIGetFilterPos err=0  currentPosition=0
06:14:41 FLIGetStepsRemaining err=0  RemainingSteps=0
06:14:41 Filter is already there-color wheel unchanged
06:14:41 Received message from Master: op=Shutter serial=184315
06:14:41 Shutter LASER open
06:14:41 Received message from Camera: op=State serial=184317
06:14:41 GetSingleValue result=40  Value=cccccccc
06:14:41 SkyScan query
06:14:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:14:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:14:42 Parameters OK
06:14:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:14:42 Set A/D data flow result=40
06:14:42 Set A/D channel type result=40
06:14:42 Set A/D encoding result=40
06:14:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:14:42 Set channel filter=0.000000e+000  result=40
06:14:42 Config A/D  Result=40
06:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:14:42 Get A/D filter: -9.255963e+061  result=40
06:14:42 Get A/D value=-858993460  result=40
06:14:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:14:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:14:42 Parameters OK
06:14:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:14:42 Set A/D data flow result=40
06:14:42 Set A/D channel type result=40
06:14:42 Set A/D encoding result=40
06:14:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:14:42 Set channel filter=0.000000e+000  result=40
06:14:42 Config A/D  Result=40
06:14:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:14:42 Get A/D filter: -9.255963e+061  result=40
06:14:42 Get A/D value=-858993460  result=40
06:14:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:14:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:14:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:14:42 Aux=
06:14:42 Message to Camera, serial 184317 queued
06:14:50 Received message from Master: op=Shutter serial=184327
06:14:50 Shutter LASER close
06:14:51 Received message from Master: op=PointingHead serial=184331
06:14:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:14:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:14:51 Point started: ret=0
06:14:51 point_skyscan result=0
06:14:52 Check angles
06:14:52 SkyScan query
06:14:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.28<-21552  Statuses=0008 0009
06:14:52 Msec=0  True Az=112.995  Ze=-143.28  Az status=0008  Ze status=0009
06:14:53 Check angles
06:14:53 SkyScan query
06:14:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.34<-20156  Statuses=0008 0009
06:14:53 Msec=750  True Az=112.995  Ze=-122.34  Az status=0008  Ze status=0009
06:14:53 Check angles
06:14:53 SkyScan query
06:14:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.385<-18759  Statuses=0008 0009
06:14:54 Msec=1500  True Az=112.995  Ze=-101.385  Az status=0008  Ze status=0009
06:14:54 Check angles
06:14:54 SkyScan query
06:14:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.415<-17361  Statuses=0008 0009
06:14:55 Msec=2250  True Az=112.995  Ze=-80.415  Az status=0008  Ze status=0009
06:14:55 Check angles
06:14:55 SkyScan query
06:14:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.055<-15937  Statuses=0008 0009
06:14:55 Msec=3000  True Az=112.995  Ze=-59.055  Az status=0008  Ze status=0009
06:14:56 Check angles
06:14:56 SkyScan query
06:14:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.055<-14537  Statuses=0008 0009
06:14:56 Msec=3750  True Az=112.995  Ze=-38.055  Az status=0008  Ze status=0009
06:14:56 Check angles
06:14:56 SkyScan query
06:14:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.115<-13141  Statuses=0008 0009
06:14:57 Msec=4500  True Az=112.995  Ze=-17.115  Az status=0008  Ze status=0009
06:14:57 Check angles
06:14:57 SkyScan query
06:14:58 SkyScan query done: ret=0  az=112.995<-7533  ze=3.84<-11744  Statuses=0008 0009
06:14:58 Msec=5250  True Az=112.995  Ze=3.84  Az status=0008  Ze status=0009
06:14:58 Check angles
06:14:58 SkyScan query
06:14:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:14:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:14:58 Message to Master queued w/err=0: serial=184331 error=0
06:15:03 Received message from Master: op=Filter serial=184332
06:15:03 Color wheel filter change from 0 to 0
06:15:03 FLIGetFilterPos err=0  currentPosition=0
06:15:03 FLIGetStepsRemaining err=0  RemainingSteps=0
06:15:03 Filter is already there-color wheel unchanged
06:15:04 Received message from Master: op=Shutter serial=184333
06:15:04 Shutter LASER close
06:15:04 Received message from Camera: op=State serial=184335
06:15:04 GetSingleValue result=40  Value=cccccccc
06:15:04 SkyScan query
06:15:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:15:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:04 Parameters OK
06:15:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:04 Set A/D data flow result=40
06:15:04 Set A/D channel type result=40
06:15:04 Set A/D encoding result=40
06:15:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:04 Set channel filter=0.000000e+000  result=40
06:15:04 Config A/D  Result=40
06:15:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:04 Get A/D filter: -9.255963e+061  result=40
06:15:04 Get A/D value=-858993460  result=40
06:15:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:04 Parameters OK
06:15:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:04 Set A/D data flow result=40
06:15:04 Set A/D channel type result=40
06:15:04 Set A/D encoding result=40
06:15:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:04 Set channel filter=0.000000e+000  result=40
06:15:04 Config A/D  Result=40
06:15:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:04 Get A/D filter: -9.255963e+061  result=40
06:15:04 Get A/D value=-858993460  result=40
06:15:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:15:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:15:04 Aux=
06:15:04 Message to Camera, serial 184335 queued
06:15:41 Received message from Master: op=PointingHead serial=184348
06:15:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:15:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:15:41 Point started: ret=0
06:15:41 point_skyscan result=0
06:15:42 Check angles
06:15:42 SkyScan query
06:15:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:15:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:15:43 Message to Master queued w/err=0: serial=184348 error=0
06:15:48 Received message from Master: op=Filter serial=184349
06:15:48 Color wheel filter change from 0 to 0
06:15:48 FLIGetFilterPos err=0  currentPosition=0
06:15:48 FLIGetStepsRemaining err=0  RemainingSteps=0
06:15:48 Filter is already there-color wheel unchanged
06:15:48 Received message from Master: op=Shutter serial=184350
06:15:48 Shutter LASER close
06:15:48 Received message from Camera: op=State serial=184352
06:15:48 GetSingleValue result=40  Value=cccccccc
06:15:48 SkyScan query
06:15:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:15:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:49 Parameters OK
06:15:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:49 Set A/D data flow result=40
06:15:49 Set A/D channel type result=40
06:15:49 Set A/D encoding result=40
06:15:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:49 Set channel filter=0.000000e+000  result=40
06:15:49 Config A/D  Result=40
06:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:49 Get A/D filter: -9.255963e+061  result=40
06:15:49 Get A/D value=-858993460  result=40
06:15:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:15:49 Parameters OK
06:15:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:15:49 Set A/D data flow result=40
06:15:49 Set A/D channel type result=40
06:15:49 Set A/D encoding result=40
06:15:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:15:49 Set channel filter=0.000000e+000  result=40
06:15:49 Config A/D  Result=40
06:15:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:15:49 Get A/D filter: -9.255963e+061  result=40
06:15:49 Get A/D value=-858993460  result=40
06:15:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:15:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:15:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:15:49 Aux=
06:15:49 Message to Camera, serial 184352 queued
06:16:25 Received message from Master: op=PointingHead serial=184365
06:16:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:16:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:16:26 Point started: ret=0
06:16:26 point_skyscan result=0
06:16:27 Check angles
06:16:27 SkyScan query
06:16:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:16:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:16:27 Message to Master queued w/err=0: serial=184365 error=0
06:16:32 Received message from Master: op=Filter serial=184366
06:16:32 Color wheel filter change from 0 to 0
06:16:32 FLIGetFilterPos err=0  currentPosition=0
06:16:32 FLIGetStepsRemaining err=0  RemainingSteps=0
06:16:32 Filter is already there-color wheel unchanged
06:16:32 Received message from Master: op=Shutter serial=184367
06:16:32 Shutter LASER close
06:16:32 Received message from Camera: op=State serial=184369
06:16:32 GetSingleValue result=40  Value=cccccccc
06:16:32 SkyScan query
06:16:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:16:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:16:33 Parameters OK
06:16:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:16:33 Set A/D data flow result=40
06:16:33 Set A/D channel type result=40
06:16:33 Set A/D encoding result=40
06:16:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:16:33 Set channel filter=0.000000e+000  result=40
06:16:33 Config A/D  Result=40
06:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:16:33 Get A/D filter: -9.255963e+061  result=40
06:16:33 Get A/D value=-858993460  result=40
06:16:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:16:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:16:33 Parameters OK
06:16:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:16:33 Set A/D data flow result=40
06:16:33 Set A/D channel type result=40
06:16:33 Set A/D encoding result=40
06:16:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:16:33 Set channel filter=0.000000e+000  result=40
06:16:33 Config A/D  Result=40
06:16:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:16:33 Get A/D filter: -9.255963e+061  result=40
06:16:33 Get A/D value=-858993460  result=40
06:16:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:16:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:16:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:16:33 Aux=
06:16:33 Message to Camera, serial 184369 queued
06:17:10 Received message from Master: op=PointingHead serial=184382
06:17:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:17:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:17:10 Point started: ret=0
06:17:10 point_skyscan result=0
06:17:11 Check angles
06:17:11 SkyScan query
06:17:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:17:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:17:12 Message to Master queued w/err=0: serial=184382 error=0
06:17:17 Received message from Master: op=Filter serial=184383
06:17:17 Color wheel filter change from 0 to 0
06:17:17 FLIGetFilterPos err=0  currentPosition=0
06:17:17 FLIGetStepsRemaining err=0  RemainingSteps=0
06:17:17 Filter is already there-color wheel unchanged
06:17:17 Received message from Master: op=Shutter serial=184384
06:17:17 Shutter LASER close
06:17:17 Received message from Camera: op=State serial=184386
06:17:17 GetSingleValue result=40  Value=cccccccc
06:17:17 SkyScan query
06:17:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:17:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:17:17 Parameters OK
06:17:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:17:17 Set A/D data flow result=40
06:17:17 Set A/D channel type result=40
06:17:17 Set A/D encoding result=40
06:17:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:17:17 Set channel filter=0.000000e+000  result=40
06:17:17 Config A/D  Result=40
06:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:17:17 Get A/D filter: -9.255963e+061  result=40
06:17:17 Get A/D value=-858993460  result=40
06:17:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:17:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:17:17 Parameters OK
06:17:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:17:17 Set A/D data flow result=40
06:17:17 Set A/D channel type result=40
06:17:17 Set A/D encoding result=40
06:17:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:17:17 Set channel filter=0.000000e+000  result=40
06:17:17 Config A/D  Result=40
06:17:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:17:17 Get A/D filter: -9.255963e+061  result=40
06:17:17 Get A/D value=-858993460  result=40
06:17:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:17:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:17:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:17:17 Aux=
06:17:17 Message to Camera, serial 184386 queued
06:17:54 Received message from Master: op=PointingHead serial=184399
06:17:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:17:54 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:17:54 Point started: ret=0
06:17:54 point_skyscan result=0
06:17:55 Check angles
06:17:55 SkyScan query
06:17:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.01<-13534  Statuses=0008 0009
06:17:56 Msec=0  True Az=112.995  Ze=-23.01  Az status=0008  Ze status=0009
06:17:56 Check angles
06:17:56 SkyScan query
06:17:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.98<-14932  Statuses=0008 0009
06:17:57 Msec=750  True Az=112.995  Ze=-43.98  Az status=0008  Ze status=0009
06:17:57 Check angles
06:17:57 SkyScan query
06:17:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.935<-16329  Statuses=0008 0009
06:17:57 Msec=1500  True Az=112.995  Ze=-64.935  Az status=0008  Ze status=0009
06:17:57 Check angles
06:17:57 SkyScan query
06:17:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.89<-17726  Statuses=0008 0009
06:17:58 Msec=2250  True Az=112.995  Ze=-85.89  Az status=0008  Ze status=0009
06:17:58 Check angles
06:17:58 SkyScan query
06:17:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.83<-19122  Statuses=0008 0009
06:17:59 Msec=3000  True Az=112.995  Ze=-106.83  Az status=0008  Ze status=0009
06:17:59 Check angles
06:17:59 SkyScan query
06:18:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.785<-20519  Statuses=0008 0009
06:18:00 Msec=3750  True Az=112.995  Ze=-127.785  Az status=0008  Ze status=0009
06:18:00 Check angles
06:18:00 SkyScan query
06:18:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.74<-21916  Statuses=0008 0009
06:18:00 Msec=4500  True Az=112.995  Ze=-148.74  Az status=0008  Ze status=0009
06:18:00 Check angles
06:18:00 SkyScan query
06:18:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.68<-23312  Statuses=0008 0009
06:18:01 Msec=5250  True Az=112.995  Ze=-169.68  Az status=0008  Ze status=0009
06:18:01 Check angles
06:18:01 SkyScan query
06:18:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:18:02 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:18:02 Message to Master queued w/err=0: serial=184399 error=0
06:18:07 Received message from Master: op=Filter serial=184400
06:18:07 Color wheel filter change from 0 to 0
06:18:07 FLIGetFilterPos err=0  currentPosition=0
06:18:07 FLIGetStepsRemaining err=0  RemainingSteps=0
06:18:07 Filter is already there-color wheel unchanged
06:18:07 Received message from Master: op=Shutter serial=184401
06:18:07 Shutter LASER open
06:18:07 Received message from Camera: op=State serial=184403
06:18:07 GetSingleValue result=40  Value=cccccccc
06:18:07 SkyScan query
06:18:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:18:08 Parameters OK
06:18:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:18:08 Set A/D data flow result=40
06:18:08 Set A/D channel type result=40
06:18:08 Set A/D encoding result=40
06:18:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:18:08 Set channel filter=0.000000e+000  result=40
06:18:08 Config A/D  Result=40
06:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:18:08 Get A/D filter: -9.255963e+061  result=40
06:18:08 Get A/D value=-858993460  result=40
06:18:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:18:08 Parameters OK
06:18:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:18:08 Set A/D data flow result=40
06:18:08 Set A/D channel type result=40
06:18:08 Set A/D encoding result=40
06:18:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:18:08 Set channel filter=0.000000e+000  result=40
06:18:08 Config A/D  Result=40
06:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:18:08 Get A/D filter: -9.255963e+061  result=40
06:18:08 Get A/D value=-858993460  result=40
06:18:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:18:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:18:08 Aux=
06:18:08 Message to Camera, serial 184403 queued
06:18:16 Received message from Master: op=Shutter serial=184413
06:18:16 Shutter LASER close
06:18:17 Received message from Master: op=PointingHead serial=184417
06:18:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:18:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:18:17 Point started: ret=0
06:18:17 point_skyscan result=0
06:18:18 Check angles
06:18:18 SkyScan query
06:18:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.845<-21523  Statuses=0008 0009
06:18:18 Msec=0  True Az=112.995  Ze=-142.845  Az status=0008  Ze status=0009
06:18:19 Check angles
06:18:19 SkyScan query
06:18:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.875<-20125  Statuses=0008 0009
06:18:19 Msec=750  True Az=112.995  Ze=-121.875  Az status=0008  Ze status=0009
06:18:19 Check angles
06:18:19 SkyScan query
06:18:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.935<-18729  Statuses=0008 0009
06:18:20 Msec=1500  True Az=112.995  Ze=-100.935  Az status=0008  Ze status=0009
06:18:20 Check angles
06:18:20 SkyScan query
06:18:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.995<-17333  Statuses=0008 0009
06:18:21 Msec=2250  True Az=112.995  Ze=-79.995  Az status=0008  Ze status=0009
06:18:21 Check angles
06:18:21 SkyScan query
06:18:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
06:18:21 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
06:18:22 Check angles
06:18:22 SkyScan query
06:18:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.055<-14537  Statuses=0008 0009
06:18:22 Msec=3750  True Az=112.995  Ze=-38.055  Az status=0008  Ze status=0009
06:18:22 Check angles
06:18:22 SkyScan query
06:18:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.115<-13141  Statuses=0008 0009
06:18:23 Msec=4500  True Az=112.995  Ze=-17.115  Az status=0008  Ze status=0009
06:18:23 Check angles
06:18:23 SkyScan query
06:18:24 SkyScan query done: ret=0  az=112.995<-7533  ze=3.84<-11744  Statuses=0008 0009
06:18:24 Msec=5250  True Az=112.995  Ze=3.84  Az status=0008  Ze status=0009
06:18:24 Check angles
06:18:24 SkyScan query
06:18:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:18:24 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:18:24 Message to Master queued w/err=0: serial=184417 error=0
06:18:29 Received message from Master: op=Filter serial=184418
06:18:29 Color wheel filter change from 0 to 0
06:18:29 FLIGetFilterPos err=0  currentPosition=0
06:18:29 FLIGetStepsRemaining err=0  RemainingSteps=0
06:18:29 Filter is already there-color wheel unchanged
06:18:30 Received message from Master: op=Shutter serial=184419
06:18:30 Shutter LASER close
06:18:30 Received message from Camera: op=State serial=184421
06:18:30 GetSingleValue result=40  Value=cccccccc
06:18:30 SkyScan query
06:18:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:18:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:18:30 Parameters OK
06:18:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:18:30 Set A/D data flow result=40
06:18:30 Set A/D channel type result=40
06:18:30 Set A/D encoding result=40
06:18:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:18:30 Set channel filter=0.000000e+000  result=40
06:18:30 Config A/D  Result=40
06:18:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:18:30 Get A/D filter: -9.255963e+061  result=40
06:18:30 Get A/D value=-858993460  result=40
06:18:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:18:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:18:30 Parameters OK
06:18:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:18:30 Set A/D data flow result=40
06:18:30 Set A/D channel type result=40
06:18:30 Set A/D encoding result=40
06:18:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:18:30 Set channel filter=0.000000e+000  result=40
06:18:30 Config A/D  Result=40
06:18:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:18:30 Get A/D filter: -9.255963e+061  result=40
06:18:30 Get A/D value=-858993460  result=40
06:18:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:18:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:18:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:18:30 Aux=
06:18:30 Message to Camera, serial 184421 queued
06:19:07 Received message from Master: op=PointingHead serial=184434
06:19:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:19:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:19:08 Point started: ret=0
06:19:08 point_skyscan result=0
06:19:08 Check angles
06:19:08 SkyScan query
06:19:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:19:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:19:09 Message to Master queued w/err=0: serial=184434 error=0
06:19:14 Received message from Master: op=Filter serial=184435
06:19:14 Color wheel filter change from 0 to 0
06:19:14 FLIGetFilterPos err=0  currentPosition=0
06:19:14 FLIGetStepsRemaining err=0  RemainingSteps=0
06:19:14 Filter is already there-color wheel unchanged
06:19:14 Received message from Master: op=Shutter serial=184436
06:19:14 Shutter LASER close
06:19:14 Received message from Camera: op=State serial=184438
06:19:14 GetSingleValue result=40  Value=cccccccc
06:19:14 SkyScan query
06:19:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:19:15 Parameters OK
06:19:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:19:15 Set A/D data flow result=40
06:19:15 Set A/D channel type result=40
06:19:15 Set A/D encoding result=40
06:19:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:19:15 Set channel filter=0.000000e+000  result=40
06:19:15 Config A/D  Result=40
06:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:19:15 Get A/D filter: -9.255963e+061  result=40
06:19:15 Get A/D value=-858993460  result=40
06:19:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:19:15 Parameters OK
06:19:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:19:15 Set A/D data flow result=40
06:19:15 Set A/D channel type result=40
06:19:15 Set A/D encoding result=40
06:19:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:19:15 Set channel filter=0.000000e+000  result=40
06:19:15 Config A/D  Result=40
06:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:19:15 Get A/D filter: -9.255963e+061  result=40
06:19:15 Get A/D value=-858993460  result=40
06:19:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:19:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:19:15 Aux=
06:19:15 Message to Camera, serial 184438 queued
06:19:51 Received message from Master: op=PointingHead serial=184451
06:19:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:19:51 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:19:52 Point started: ret=0
06:19:52 point_skyscan result=0
06:19:53 Check angles
06:19:53 SkyScan query
06:19:53 SkyScan query done: ret=0  az=135.81<-9054  ze=-6.51<-12434  Statuses=0009 0008
06:19:53 Msec=0  True Az=135.81  Ze=-6.51  Az status=0009  Ze status=0008
06:19:53 Check angles
06:19:53 SkyScan query
06:19:54 SkyScan query done: ret=0  az=153.3<-10220  ze=-6.495<-12433  Statuses=0009 0008
06:19:54 Msec=750  True Az=153.3  Ze=-6.495  Az status=0009  Ze status=0008
06:19:54 Check angles
06:19:54 SkyScan query
06:19:55 SkyScan query done: ret=0  az=170.835<-11389  ze=-6.495<-12433  Statuses=0009 0008
06:19:55 Msec=1500  True Az=170.835  Ze=-6.495  Az status=0009  Ze status=0008
06:19:55 Check angles
06:19:55 SkyScan query
06:19:55 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:19:55 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:19:55 Message to Master queued w/err=0: serial=184451 error=0
06:20:00 Received message from Master: op=Filter serial=184452
06:20:00 Color wheel filter change from 0 to 0
06:20:00 FLIGetFilterPos err=0  currentPosition=0
06:20:00 FLIGetStepsRemaining err=0  RemainingSteps=0
06:20:00 Filter is already there-color wheel unchanged
06:20:01 Received message from Master: op=Shutter serial=184453
06:20:01 Shutter LASER close
06:20:01 Received message from Camera: op=State serial=184455
06:20:01 GetSingleValue result=40  Value=cccccccc
06:20:01 SkyScan query
06:20:01 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:20:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:20:01 Parameters OK
06:20:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:20:01 Set A/D data flow result=40
06:20:01 Set A/D channel type result=40
06:20:01 Set A/D encoding result=40
06:20:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:20:01 Set channel filter=0.000000e+000  result=40
06:20:01 Config A/D  Result=40
06:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:20:01 Get A/D filter: -9.255963e+061  result=40
06:20:01 Get A/D value=-858993460  result=40
06:20:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:20:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:20:01 Parameters OK
06:20:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:20:01 Set A/D data flow result=40
06:20:01 Set A/D channel type result=40
06:20:01 Set A/D encoding result=40
06:20:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:20:01 Set channel filter=0.000000e+000  result=40
06:20:01 Config A/D  Result=40
06:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:20:01 Get A/D filter: -9.255963e+061  result=40
06:20:01 Get A/D value=-858993460  result=40
06:20:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:20:01 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:20:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:20:01 Aux=
06:20:01 Message to Camera, serial 184455 queued
06:20:38 Received message from Master: op=PointingHead serial=184468
06:20:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:20:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:20:38 Point started: ret=0
06:20:38 point_skyscan result=0
06:20:39 Check angles
06:20:39 SkyScan query
06:20:40 SkyScan query done: ret=0  az=152.79<-10186  ze=6.51<-11566  Statuses=0009 0008
06:20:40 Msec=0  True Az=152.79  Ze=6.51  Az status=0009  Ze status=0008
06:20:40 Check angles
06:20:40 SkyScan query
06:20:40 SkyScan query done: ret=0  az=135.465<-9031  ze=6.495<-11567  Statuses=0009 0008
06:20:40 Msec=750  True Az=135.465  Ze=6.495  Az status=0009  Ze status=0008
06:20:41 Check angles
06:20:41 SkyScan query
06:20:41 SkyScan query done: ret=0  az=117.63<-7842  ze=6.495<-11567  Statuses=0009 0008
06:20:41 Msec=1500  True Az=117.63  Ze=6.495  Az status=0009  Ze status=0008
06:20:41 Check angles
06:20:41 SkyScan query
06:20:42 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
06:20:42 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
06:20:42 Message to Master queued w/err=0: serial=184468 error=0
06:20:47 Received message from Master: op=Filter serial=184469
06:20:47 Color wheel filter change from 0 to 0
06:20:47 FLIGetFilterPos err=0  currentPosition=0
06:20:47 FLIGetStepsRemaining err=0  RemainingSteps=0
06:20:47 Filter is already there-color wheel unchanged
06:20:47 Received message from Master: op=Shutter serial=184470
06:20:47 Shutter LASER close
06:20:47 Received message from Camera: op=State serial=184472
06:20:47 GetSingleValue result=40  Value=cccccccc
06:20:47 SkyScan query
06:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:20:48 Parameters OK
06:20:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:20:48 Set A/D data flow result=40
06:20:48 Set A/D channel type result=40
06:20:48 Set A/D encoding result=40
06:20:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:20:48 Set channel filter=0.000000e+000  result=40
06:20:48 Config A/D  Result=40
06:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:20:48 Get A/D filter: -9.255963e+061  result=40
06:20:48 Get A/D value=-858993460  result=40
06:20:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:20:48 Parameters OK
06:20:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:20:48 Set A/D data flow result=40
06:20:48 Set A/D channel type result=40
06:20:48 Set A/D encoding result=40
06:20:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:20:48 Set channel filter=0.000000e+000  result=40
06:20:48 Config A/D  Result=40
06:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:20:48 Get A/D filter: -9.255963e+061  result=40
06:20:48 Get A/D value=-858993460  result=40
06:20:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:20:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:20:48 Aux=
06:20:48 Message to Camera, serial 184472 queued
06:21:25 Received message from Master: op=PointingHead serial=184485
06:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:21:25 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:21:25 Point started: ret=0
06:21:25 point_skyscan result=0
06:21:26 Check angles
06:21:26 SkyScan query
06:21:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.085<-13539  Statuses=0008 0009
06:21:26 Msec=0  True Az=112.995  Ze=-23.085  Az status=0008  Ze status=0009
06:21:26 Check angles
06:21:26 SkyScan query
06:21:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.055<-14937  Statuses=0008 0009
06:21:27 Msec=750  True Az=112.995  Ze=-44.055  Az status=0008  Ze status=0009
06:21:27 Check angles
06:21:27 SkyScan query
06:21:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.445<-16363  Statuses=0008 0009
06:21:28 Msec=1500  True Az=112.995  Ze=-65.445  Az status=0008  Ze status=0009
06:21:28 Check angles
06:21:28 SkyScan query
06:21:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.4<-17760  Statuses=0008 0009
06:21:29 Msec=2250  True Az=112.995  Ze=-86.4  Az status=0008  Ze status=0009
06:21:29 Check angles
06:21:29 SkyScan query
06:21:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.775<-19185  Statuses=0008 0009
06:21:29 Msec=3000  True Az=112.995  Ze=-107.775  Az status=0008  Ze status=0009
06:21:30 Check angles
06:21:30 SkyScan query
06:21:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.715<-20581  Statuses=0008 0009
06:21:30 Msec=3750  True Az=112.995  Ze=-128.715  Az status=0008  Ze status=0009
06:21:30 Check angles
06:21:30 SkyScan query
06:21:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.685<-21979  Statuses=0008 0009
06:21:31 Msec=4500  True Az=112.995  Ze=-149.685  Az status=0008  Ze status=0009
06:21:31 Check angles
06:21:31 SkyScan query
06:21:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.955<-23397  Statuses=0008 0009
06:21:32 Msec=5250  True Az=112.995  Ze=-170.955  Az status=0008  Ze status=0009
06:21:32 Check angles
06:21:32 SkyScan query
06:21:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:21:32 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:21:32 Message to Master queued w/err=0: serial=184485 error=0
06:21:37 Received message from Master: op=Filter serial=184486
06:21:37 Color wheel filter change from 0 to 0
06:21:37 FLIGetFilterPos err=0  currentPosition=0
06:21:37 FLIGetStepsRemaining err=0  RemainingSteps=0
06:21:37 Filter is already there-color wheel unchanged
06:21:38 Received message from Master: op=Shutter serial=184487
06:21:38 Shutter LASER open
06:21:38 Received message from Camera: op=State serial=184489
06:21:38 GetSingleValue result=40  Value=cccccccc
06:21:38 SkyScan query
06:21:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:21:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:21:38 Parameters OK
06:21:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:21:38 Set A/D data flow result=40
06:21:38 Set A/D channel type result=40
06:21:38 Set A/D encoding result=40
06:21:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:21:38 Set channel filter=0.000000e+000  result=40
06:21:38 Config A/D  Result=40
06:21:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:21:38 Get A/D filter: -9.255963e+061  result=40
06:21:38 Get A/D value=-858993460  result=40
06:21:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:21:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:21:38 Parameters OK
06:21:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:21:38 Set A/D data flow result=40
06:21:38 Set A/D channel type result=40
06:21:38 Set A/D encoding result=40
06:21:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:21:38 Set channel filter=0.000000e+000  result=40
06:21:38 Config A/D  Result=40
06:21:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:21:38 Get A/D filter: -9.255963e+061  result=40
06:21:38 Get A/D value=-858993460  result=40
06:21:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:21:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:21:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:21:38 Aux=
06:21:38 Message to Camera, serial 184489 queued
06:21:47 Received message from Master: op=Shutter serial=184499
06:21:47 Shutter LASER close
06:21:47 Received message from Master: op=PointingHead serial=184503
06:21:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:21:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:21:47 Point started: ret=0
06:21:47 point_skyscan result=0
06:21:48 Check angles
06:21:48 SkyScan query
06:21:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
06:21:49 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
06:21:49 Check angles
06:21:49 SkyScan query
06:21:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.89<-20126  Statuses=0008 0009
06:21:50 Msec=750  True Az=112.995  Ze=-121.89  Az status=0008  Ze status=0009
06:21:50 Check angles
06:21:50 SkyScan query
06:21:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.53<-18702  Statuses=0008 0009
06:21:50 Msec=1500  True Az=112.995  Ze=-100.53  Az status=0008  Ze status=0009
06:21:51 Check angles
06:21:51 SkyScan query
06:21:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.56<-17304  Statuses=0008 0009
06:21:51 Msec=2250  True Az=112.995  Ze=-79.56  Az status=0008  Ze status=0009
06:21:51 Check angles
06:21:51 SkyScan query
06:21:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.62<-15908  Statuses=0008 0009
06:21:52 Msec=3000  True Az=112.995  Ze=-58.62  Az status=0008  Ze status=0009
06:21:52 Check angles
06:21:52 SkyScan query
06:21:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.65<-14510  Statuses=0008 0009
06:21:53 Msec=3750  True Az=112.995  Ze=-37.65  Az status=0008  Ze status=0009
06:21:53 Check angles
06:21:53 SkyScan query
06:21:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.695<-13113  Statuses=0008 0009
06:21:53 Msec=4500  True Az=112.995  Ze=-16.695  Az status=0008  Ze status=0009
06:21:54 Check angles
06:21:54 SkyScan query
06:21:54 SkyScan query done: ret=0  az=112.995<-7533  ze=4.215<-11719  Statuses=0008 0009
06:21:54 Msec=5250  True Az=112.995  Ze=4.215  Az status=0008  Ze status=0009
06:21:54 Check angles
06:21:54 SkyScan query
06:21:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:21:55 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:21:55 Message to Master queued w/err=0: serial=184503 error=0
06:22:00 Received message from Master: op=Filter serial=184504
06:22:00 Color wheel filter change from 0 to 0
06:22:00 FLIGetFilterPos err=0  currentPosition=0
06:22:00 FLIGetStepsRemaining err=0  RemainingSteps=0
06:22:00 Filter is already there-color wheel unchanged
06:22:00 Received message from Master: op=Shutter serial=184505
06:22:00 Shutter LASER close
06:22:00 Received message from Camera: op=State serial=184507
06:22:00 GetSingleValue result=40  Value=cccccccc
06:22:00 SkyScan query
06:22:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:22:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:01 Parameters OK
06:22:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:01 Set A/D data flow result=40
06:22:01 Set A/D channel type result=40
06:22:01 Set A/D encoding result=40
06:22:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:01 Set channel filter=0.000000e+000  result=40
06:22:01 Config A/D  Result=40
06:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:01 Get A/D filter: -9.255963e+061  result=40
06:22:01 Get A/D value=-858993460  result=40
06:22:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:01 Parameters OK
06:22:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:01 Set A/D data flow result=40
06:22:01 Set A/D channel type result=40
06:22:01 Set A/D encoding result=40
06:22:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:01 Set channel filter=0.000000e+000  result=40
06:22:01 Config A/D  Result=40
06:22:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:01 Get A/D filter: -9.255963e+061  result=40
06:22:01 Get A/D value=-858993460  result=40
06:22:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:22:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:22:01 Aux=
06:22:01 Message to Camera, serial 184507 queued
06:22:38 Received message from Master: op=PointingHead serial=184520
06:22:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:22:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:22:38 Point started: ret=0
06:22:38 point_skyscan result=0
06:22:39 Check angles
06:22:39 SkyScan query
06:22:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:22:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:22:39 Message to Master queued w/err=0: serial=184520 error=0
06:22:44 Received message from Master: op=Filter serial=184521
06:22:44 Color wheel filter change from 0 to 0
06:22:44 FLIGetFilterPos err=0  currentPosition=0
06:22:44 FLIGetStepsRemaining err=0  RemainingSteps=0
06:22:44 Filter is already there-color wheel unchanged
06:22:44 Received message from Master: op=Shutter serial=184522
06:22:44 Shutter LASER close
06:22:44 Received message from Camera: op=State serial=184524
06:22:44 GetSingleValue result=40  Value=cccccccc
06:22:44 SkyScan query
06:22:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:22:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:45 Parameters OK
06:22:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:45 Set A/D data flow result=40
06:22:45 Set A/D channel type result=40
06:22:45 Set A/D encoding result=40
06:22:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:45 Set channel filter=0.000000e+000  result=40
06:22:45 Config A/D  Result=40
06:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:45 Get A/D filter: -9.255963e+061  result=40
06:22:45 Get A/D value=-858993460  result=40
06:22:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:22:45 Parameters OK
06:22:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:22:45 Set A/D data flow result=40
06:22:45 Set A/D channel type result=40
06:22:45 Set A/D encoding result=40
06:22:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:22:45 Set channel filter=0.000000e+000  result=40
06:22:45 Config A/D  Result=40
06:22:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:22:45 Get A/D filter: -9.255963e+061  result=40
06:22:45 Get A/D value=-858993460  result=40
06:22:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:22:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:22:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:22:45 Aux=
06:22:45 Message to Camera, serial 184524 queued
06:23:22 Received message from Master: op=PointingHead serial=184537
06:23:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:23:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:23:22 Point started: ret=0
06:23:22 point_skyscan result=0
06:23:23 Check angles
06:23:23 SkyScan query
06:23:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:23:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:23:24 Message to Master queued w/err=0: serial=184537 error=0
06:23:29 Received message from Master: op=Filter serial=184538
06:23:29 Color wheel filter change from 0 to 0
06:23:29 FLIGetFilterPos err=0  currentPosition=0
06:23:29 FLIGetStepsRemaining err=0  RemainingSteps=0
06:23:29 Filter is already there-color wheel unchanged
06:23:29 Received message from Master: op=Shutter serial=184539
06:23:29 Shutter LASER close
06:23:29 Received message from Camera: op=State serial=184541
06:23:29 GetSingleValue result=40  Value=cccccccc
06:23:29 SkyScan query
06:23:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:23:29 Parameters OK
06:23:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:23:29 Set A/D data flow result=40
06:23:29 Set A/D channel type result=40
06:23:29 Set A/D encoding result=40
06:23:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:23:29 Set channel filter=0.000000e+000  result=40
06:23:29 Config A/D  Result=40
06:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:23:29 Get A/D filter: -9.255963e+061  result=40
06:23:29 Get A/D value=-858993460  result=40
06:23:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:23:29 Parameters OK
06:23:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:23:29 Set A/D data flow result=40
06:23:29 Set A/D channel type result=40
06:23:29 Set A/D encoding result=40
06:23:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:23:29 Set channel filter=0.000000e+000  result=40
06:23:29 Config A/D  Result=40
06:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:23:29 Get A/D filter: -9.255963e+061  result=40
06:23:29 Get A/D value=-858993460  result=40
06:23:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:23:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:23:29 Aux=
06:23:29 Message to Camera, serial 184541 queued
[UTC 2019-3-9  06:23:48]
06:24:06 Received message from Master: op=PointingHead serial=184554
06:24:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:24:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:24:06 Point started: ret=0
06:24:06 point_skyscan result=0
06:24:07 Check angles
06:24:07 SkyScan query
06:24:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:24:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:24:08 Message to Master queued w/err=0: serial=184554 error=0
06:24:13 Received message from Master: op=Filter serial=184555
06:24:13 Color wheel filter change from 0 to 0
06:24:13 FLIGetFilterPos err=0  currentPosition=0
06:24:13 FLIGetStepsRemaining err=0  RemainingSteps=0
06:24:13 Filter is already there-color wheel unchanged
06:24:13 Received message from Master: op=Shutter serial=184556
06:24:13 Shutter LASER close
06:24:13 Received message from Camera: op=State serial=184558
06:24:13 GetSingleValue result=40  Value=cccccccc
06:24:13 SkyScan query
06:24:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:24:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:24:14 Parameters OK
06:24:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:24:14 Set A/D data flow result=40
06:24:14 Set A/D channel type result=40
06:24:14 Set A/D encoding result=40
06:24:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:24:14 Set channel filter=0.000000e+000  result=40
06:24:14 Config A/D  Result=40
06:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:24:14 Get A/D filter: -9.255963e+061  result=40
06:24:14 Get A/D value=-858993460  result=40
06:24:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:24:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:24:14 Parameters OK
06:24:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:24:14 Set A/D data flow result=40
06:24:14 Set A/D channel type result=40
06:24:14 Set A/D encoding result=40
06:24:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:24:14 Set channel filter=0.000000e+000  result=40
06:24:14 Config A/D  Result=40
06:24:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:24:14 Get A/D filter: -9.255963e+061  result=40
06:24:14 Get A/D value=-858993460  result=40
06:24:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:24:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:24:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:24:14 Aux=
06:24:14 Message to Camera, serial 184558 queued
06:24:50 Received message from Master: op=PointingHead serial=184571
06:24:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:24:50 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:24:51 Point started: ret=0
06:24:51 point_skyscan result=0
06:24:52 Check angles
06:24:52 SkyScan query
06:24:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
06:24:52 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
06:24:52 Check angles
06:24:52 SkyScan query
06:24:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
06:24:53 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
06:24:53 Check angles
06:24:53 SkyScan query
06:24:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.82<-16388  Statuses=0008 0009
06:24:54 Msec=1500  True Az=112.995  Ze=-65.82  Az status=0008  Ze status=0009
06:24:54 Check angles
06:24:54 SkyScan query
06:24:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
06:24:54 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
06:24:55 Check angles
06:24:55 SkyScan query
06:24:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.73<-19182  Statuses=0008 0009
06:24:55 Msec=3000  True Az=112.995  Ze=-107.73  Az status=0008  Ze status=0009
06:24:55 Check angles
06:24:55 SkyScan query
06:24:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.67<-20578  Statuses=0008 0009
06:24:56 Msec=3750  True Az=112.995  Ze=-128.67  Az status=0008  Ze status=0009
06:24:56 Check angles
06:24:56 SkyScan query
06:24:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.64<-21976  Statuses=0008 0009
06:24:57 Msec=4500  True Az=112.995  Ze=-149.64  Az status=0008  Ze status=0009
06:24:57 Check angles
06:24:57 SkyScan query
06:24:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.565<-23371  Statuses=0008 0009
06:24:57 Msec=5250  True Az=112.995  Ze=-170.565  Az status=0008  Ze status=0009
06:24:58 Check angles
06:24:58 SkyScan query
06:24:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:24:58 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:24:58 Message to Master queued w/err=0: serial=184571 error=0
06:25:03 Received message from Master: op=Filter serial=184572
06:25:03 Color wheel filter change from 0 to 0
06:25:03 FLIGetFilterPos err=0  currentPosition=0
06:25:03 FLIGetStepsRemaining err=0  RemainingSteps=0
06:25:03 Filter is already there-color wheel unchanged
06:25:03 Received message from Master: op=Shutter serial=184573
06:25:03 Shutter LASER open
06:25:03 Received message from Camera: op=State serial=184575
06:25:03 GetSingleValue result=40  Value=cccccccc
06:25:03 SkyScan query
06:25:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:25:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:04 Parameters OK
06:25:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:04 Set A/D data flow result=40
06:25:04 Set A/D channel type result=40
06:25:04 Set A/D encoding result=40
06:25:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:04 Set channel filter=0.000000e+000  result=40
06:25:04 Config A/D  Result=40
06:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:04 Get A/D filter: -9.255963e+061  result=40
06:25:04 Get A/D value=-858993460  result=40
06:25:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:04 Parameters OK
06:25:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:04 Set A/D data flow result=40
06:25:04 Set A/D channel type result=40
06:25:04 Set A/D encoding result=40
06:25:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:04 Set channel filter=0.000000e+000  result=40
06:25:04 Config A/D  Result=40
06:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:04 Get A/D filter: -9.255963e+061  result=40
06:25:04 Get A/D value=-858993460  result=40
06:25:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:25:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:25:04 Aux=
06:25:04 Message to Camera, serial 184575 queued
06:25:12 Received message from Master: op=Shutter serial=184585
06:25:12 Shutter LASER close
06:25:13 Received message from Master: op=PointingHead serial=184589
06:25:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:25:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:25:13 Point started: ret=0
06:25:13 point_skyscan result=0
06:25:14 Check angles
06:25:14 SkyScan query
06:25:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
06:25:15 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
06:25:15 Check angles
06:25:15 SkyScan query
06:25:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.07<-20138  Statuses=0008 0009
06:25:15 Msec=750  True Az=112.995  Ze=-122.07  Az status=0008  Ze status=0009
06:25:16 Check angles
06:25:16 SkyScan query
06:25:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
06:25:16 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
06:25:16 Check angles
06:25:16 SkyScan query
06:25:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.74<-17316  Statuses=0008 0009
06:25:17 Msec=2250  True Az=112.995  Ze=-79.74  Az status=0008  Ze status=0009
06:25:17 Check angles
06:25:17 SkyScan query
06:25:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.335<-15889  Statuses=0008 0009
06:25:18 Msec=3000  True Az=112.995  Ze=-58.335  Az status=0008  Ze status=0009
06:25:18 Check angles
06:25:18 SkyScan query
06:25:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.41<-14494  Statuses=0008 0009
06:25:19 Msec=3750  True Az=112.995  Ze=-37.41  Az status=0008  Ze status=0009
06:25:19 Check angles
06:25:19 SkyScan query
06:25:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.44<-13096  Statuses=0008 0009
06:25:19 Msec=4500  True Az=112.995  Ze=-16.44  Az status=0008  Ze status=0009
06:25:19 Check angles
06:25:19 SkyScan query
06:25:20 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
06:25:20 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
06:25:20 Check angles
06:25:20 SkyScan query
06:25:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:25:21 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:25:21 Message to Master queued w/err=0: serial=184589 error=0
06:25:26 Received message from Master: op=Filter serial=184590
06:25:26 Color wheel filter change from 0 to 0
06:25:26 FLIGetFilterPos err=0  currentPosition=0
06:25:26 FLIGetStepsRemaining err=0  RemainingSteps=0
06:25:26 Filter is already there-color wheel unchanged
06:25:26 Received message from Master: op=Shutter serial=184591
06:25:26 Shutter LASER close
06:25:26 Received message from Camera: op=State serial=184593
06:25:26 GetSingleValue result=40  Value=cccccccc
06:25:26 SkyScan query
06:25:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:25:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:27 Parameters OK
06:25:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:27 Set A/D data flow result=40
06:25:27 Set A/D channel type result=40
06:25:27 Set A/D encoding result=40
06:25:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:27 Set channel filter=0.000000e+000  result=40
06:25:27 Config A/D  Result=40
06:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:27 Get A/D filter: -9.255963e+061  result=40
06:25:27 Get A/D value=-858993460  result=40
06:25:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:25:27 Parameters OK
06:25:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:25:27 Set A/D data flow result=40
06:25:27 Set A/D channel type result=40
06:25:27 Set A/D encoding result=40
06:25:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:25:27 Set channel filter=0.000000e+000  result=40
06:25:27 Config A/D  Result=40
06:25:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:25:27 Get A/D filter: -9.255963e+061  result=40
06:25:27 Get A/D value=-858993460  result=40
06:25:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:25:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:25:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:25:27 Aux=
06:25:27 Message to Camera, serial 184593 queued
06:26:03 Received message from Master: op=PointingHead serial=184605
06:26:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:26:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:26:03 Point started: ret=0
06:26:03 point_skyscan result=0
06:26:04 Check angles
06:26:04 SkyScan query
06:26:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:26:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:26:04 Message to Master queued w/err=0: serial=184605 error=0
06:26:09 Received message from Master: op=Filter serial=184606
06:26:09 Color wheel filter change from 0 to 0
06:26:09 FLIGetFilterPos err=0  currentPosition=0
06:26:09 FLIGetStepsRemaining err=0  RemainingSteps=0
06:26:09 Filter is already there-color wheel unchanged
06:26:09 Received message from Master: op=Shutter serial=184607
06:26:09 Shutter LASER close
06:26:09 Received message from Camera: op=State serial=184609
06:26:09 GetSingleValue result=40  Value=cccccccc
06:26:09 SkyScan query
06:26:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:26:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:26:10 Parameters OK
06:26:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:26:10 Set A/D data flow result=40
06:26:10 Set A/D channel type result=40
06:26:10 Set A/D encoding result=40
06:26:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:26:10 Set channel filter=0.000000e+000  result=40
06:26:10 Config A/D  Result=40
06:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:26:10 Get A/D filter: -9.255963e+061  result=40
06:26:10 Get A/D value=-858993460  result=40
06:26:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:26:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:26:10 Parameters OK
06:26:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:26:10 Set A/D data flow result=40
06:26:10 Set A/D channel type result=40
06:26:10 Set A/D encoding result=40
06:26:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:26:10 Set channel filter=0.000000e+000  result=40
06:26:10 Config A/D  Result=40
06:26:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:26:10 Get A/D filter: -9.255963e+061  result=40
06:26:10 Get A/D value=-858993460  result=40
06:26:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:26:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:26:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:26:10 Aux=
06:26:10 Message to Camera, serial 184609 queued
06:26:47 Received message from Master: op=PointingHead serial=184622
06:26:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:26:47 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:26:47 Point started: ret=0
06:26:47 point_skyscan result=0
06:26:48 Check angles
06:26:48 SkyScan query
06:26:49 SkyScan query done: ret=0  az=135.735<-9049  ze=-6.51<-12434  Statuses=0009 0008
06:26:49 Msec=0  True Az=135.735  Ze=-6.51  Az status=0009  Ze status=0008
06:26:49 Check angles
06:26:49 SkyScan query
06:26:49 SkyScan query done: ret=0  az=153.285<-10219  ze=-6.495<-12433  Statuses=0009 0008
06:26:49 Msec=750  True Az=153.285  Ze=-6.495  Az status=0009  Ze status=0008
06:26:49 Check angles
06:26:49 SkyScan query
06:26:50 SkyScan query done: ret=0  az=170.685<-11379  ze=-6.495<-12433  Statuses=0009 0008
06:26:50 Msec=1500  True Az=170.685  Ze=-6.495  Az status=0009  Ze status=0008
06:26:50 Check angles
06:26:50 SkyScan query
06:26:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:26:51 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:26:51 Message to Master queued w/err=0: serial=184622 error=0
06:26:56 Received message from Master: op=Filter serial=184623
06:26:56 Color wheel filter change from 0 to 0
06:26:56 FLIGetFilterPos err=0  currentPosition=0
06:26:56 FLIGetStepsRemaining err=0  RemainingSteps=0
06:26:56 Filter is already there-color wheel unchanged
06:26:56 Received message from Master: op=Shutter serial=184624
06:26:56 Shutter LASER close
06:26:56 Received message from Camera: op=State serial=184626
06:26:56 GetSingleValue result=40  Value=cccccccc
06:26:56 SkyScan query
06:26:57 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:26:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:26:57 Parameters OK
06:26:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:26:57 Set A/D data flow result=40
06:26:57 Set A/D channel type result=40
06:26:57 Set A/D encoding result=40
06:26:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:26:57 Set channel filter=0.000000e+000  result=40
06:26:57 Config A/D  Result=40
06:26:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:26:57 Get A/D filter: -9.255963e+061  result=40
06:26:57 Get A/D value=-858993460  result=40
06:26:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:26:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:26:57 Parameters OK
06:26:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:26:57 Set A/D data flow result=40
06:26:57 Set A/D channel type result=40
06:26:57 Set A/D encoding result=40
06:26:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:26:57 Set channel filter=0.000000e+000  result=40
06:26:57 Config A/D  Result=40
06:26:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:26:57 Get A/D filter: -9.255963e+061  result=40
06:26:57 Get A/D value=-858993460  result=40
06:26:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:26:57 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:26:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:26:57 Aux=
06:26:57 Message to Camera, serial 184626 queued
06:27:33 Received message from Master: op=PointingHead serial=184639
06:27:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:27:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:27:34 Point started: ret=0
06:27:34 point_skyscan result=0
06:27:35 Check angles
06:27:35 SkyScan query
06:27:35 SkyScan query done: ret=0  az=153.24<-10216  ze=6.51<-11566  Statuses=0009 0008
06:27:35 Msec=0  True Az=153.24  Ze=6.51  Az status=0009  Ze status=0008
06:27:35 Check angles
06:27:35 SkyScan query
06:27:36 SkyScan query done: ret=0  az=135.75<-9050  ze=6.495<-11567  Statuses=0009 0008
06:27:36 Msec=750  True Az=135.75  Ze=6.495  Az status=0009  Ze status=0008
06:27:36 Check angles
06:27:36 SkyScan query
06:27:37 SkyScan query done: ret=0  az=117.81<-7854  ze=6.495<-11567  Statuses=0009 0008
06:27:37 Msec=1500  True Az=117.81  Ze=6.495  Az status=0009  Ze status=0008
06:27:37 Check angles
06:27:37 SkyScan query
06:27:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:27:37 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:27:37 Message to Master queued w/err=0: serial=184639 error=0
06:27:42 Received message from Master: op=Filter serial=184640
06:27:42 Color wheel filter change from 0 to 0
06:27:42 FLIGetFilterPos err=0  currentPosition=0
06:27:42 FLIGetStepsRemaining err=0  RemainingSteps=0
06:27:42 Filter is already there-color wheel unchanged
06:27:43 Received message from Master: op=Shutter serial=184641
06:27:43 Shutter LASER close
06:27:43 Received message from Camera: op=State serial=184643
06:27:43 GetSingleValue result=40  Value=cccccccc
06:27:43 SkyScan query
06:27:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:27:43 Parameters OK
06:27:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:27:43 Set A/D data flow result=40
06:27:43 Set A/D channel type result=40
06:27:43 Set A/D encoding result=40
06:27:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:27:43 Set channel filter=0.000000e+000  result=40
06:27:43 Config A/D  Result=40
06:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:27:43 Get A/D filter: -9.255963e+061  result=40
06:27:43 Get A/D value=-858993460  result=40
06:27:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:27:43 Parameters OK
06:27:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:27:43 Set A/D data flow result=40
06:27:43 Set A/D channel type result=40
06:27:43 Set A/D encoding result=40
06:27:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:27:43 Set channel filter=0.000000e+000  result=40
06:27:43 Config A/D  Result=40
06:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:27:43 Get A/D filter: -9.255963e+061  result=40
06:27:43 Get A/D value=-858993460  result=40
06:27:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:27:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:27:43 Aux=
06:27:43 Message to Camera, serial 184643 queued
06:28:20 Received message from Master: op=PointingHead serial=184656
06:28:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:28:20 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:28:20 Point started: ret=0
06:28:20 point_skyscan result=0
06:28:21 Check angles
06:28:21 SkyScan query
06:28:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
06:28:22 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
06:28:22 Check angles
06:28:22 SkyScan query
06:28:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.085<-14939  Statuses=0008 0009
06:28:22 Msec=750  True Az=112.995  Ze=-44.085  Az status=0008  Ze status=0009
06:28:23 Check angles
06:28:23 SkyScan query
06:28:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.04<-16336  Statuses=0008 0009
06:28:23 Msec=1500  True Az=112.995  Ze=-65.04  Az status=0008  Ze status=0009
06:28:23 Check angles
06:28:23 SkyScan query
06:28:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.995<-17733  Statuses=0008 0009
06:28:24 Msec=2250  True Az=112.995  Ze=-85.995  Az status=0008  Ze status=0009
06:28:24 Check angles
06:28:24 SkyScan query
06:28:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
06:28:25 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
06:28:25 Check angles
06:28:25 SkyScan query
06:28:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.31<-20554  Statuses=0008 0009
06:28:25 Msec=3750  True Az=112.995  Ze=-128.31  Az status=0008  Ze status=0009
06:28:26 Check angles
06:28:26 SkyScan query
06:28:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.265<-21951  Statuses=0008 0009
06:28:26 Msec=4500  True Az=112.995  Ze=-149.265  Az status=0008  Ze status=0009
06:28:26 Check angles
06:28:26 SkyScan query
06:28:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
06:28:27 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
06:28:27 Check angles
06:28:27 SkyScan query
06:28:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:28:28 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:28:28 Message to Master queued w/err=0: serial=184656 error=0
06:28:33 Received message from Master: op=Filter serial=184657
06:28:33 Color wheel filter change from 0 to 0
06:28:33 FLIGetFilterPos err=0  currentPosition=0
06:28:33 FLIGetStepsRemaining err=0  RemainingSteps=0
06:28:33 Filter is already there-color wheel unchanged
06:28:33 Received message from Master: op=Shutter serial=184658
06:28:33 Shutter LASER open
06:28:33 Received message from Camera: op=State serial=184660
06:28:33 GetSingleValue result=40  Value=cccccccc
06:28:33 SkyScan query
06:28:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:28:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:34 Parameters OK
06:28:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:34 Set A/D data flow result=40
06:28:34 Set A/D channel type result=40
06:28:34 Set A/D encoding result=40
06:28:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:34 Set channel filter=0.000000e+000  result=40
06:28:34 Config A/D  Result=40
06:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:34 Get A/D filter: -9.255963e+061  result=40
06:28:34 Get A/D value=-858993460  result=40
06:28:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:34 Parameters OK
06:28:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:34 Set A/D data flow result=40
06:28:34 Set A/D channel type result=40
06:28:34 Set A/D encoding result=40
06:28:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:34 Set channel filter=0.000000e+000  result=40
06:28:34 Config A/D  Result=40
06:28:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:34 Get A/D filter: -9.255963e+061  result=40
06:28:34 Get A/D value=-858993460  result=40
06:28:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:28:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:28:34 Aux=
06:28:34 Message to Camera, serial 184660 queued
06:28:42 Received message from Master: op=Shutter serial=184670
06:28:42 Shutter LASER close
06:28:42 Received message from Master: op=PointingHead serial=184674
06:28:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:28:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:28:43 Point started: ret=0
06:28:43 point_skyscan result=0
06:28:44 Check angles
06:28:44 SkyScan query
06:28:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
06:28:44 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
06:28:44 Check angles
06:28:44 SkyScan query
06:28:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
06:28:45 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
06:28:45 Check angles
06:28:45 SkyScan query
06:28:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.205<-18747  Statuses=0008 0009
06:28:46 Msec=1500  True Az=112.995  Ze=-101.205  Az status=0008  Ze status=0009
06:28:46 Check angles
06:28:46 SkyScan query
06:28:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.25<-17350  Statuses=0008 0009
06:28:46 Msec=2250  True Az=112.995  Ze=-80.25  Az status=0008  Ze status=0009
06:28:47 Check angles
06:28:47 SkyScan query
06:28:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.875<-15925  Statuses=0008 0009
06:28:47 Msec=3000  True Az=112.995  Ze=-58.875  Az status=0008  Ze status=0009
06:28:47 Check angles
06:28:47 SkyScan query
06:28:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.905<-14527  Statuses=0008 0009
06:28:48 Msec=3750  True Az=112.995  Ze=-37.905  Az status=0008  Ze status=0009
06:28:48 Check angles
06:28:48 SkyScan query
06:28:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.95<-13130  Statuses=0008 0009
06:28:49 Msec=4500  True Az=112.995  Ze=-16.95  Az status=0008  Ze status=0009
06:28:49 Check angles
06:28:49 SkyScan query
06:28:49 SkyScan query done: ret=0  az=112.995<-7533  ze=4.005<-11733  Statuses=0008 0009
06:28:49 Msec=5250  True Az=112.995  Ze=4.005  Az status=0008  Ze status=0009
06:28:50 Check angles
06:28:50 SkyScan query
06:28:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:28:50 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:28:50 Message to Master queued w/err=0: serial=184674 error=0
06:28:55 Received message from Master: op=Filter serial=184675
06:28:55 Color wheel filter change from 0 to 0
06:28:55 FLIGetFilterPos err=0  currentPosition=0
06:28:55 FLIGetStepsRemaining err=0  RemainingSteps=0
06:28:55 Filter is already there-color wheel unchanged
06:28:55 Received message from Master: op=Shutter serial=184676
06:28:55 Shutter LASER close
06:28:56 Received message from Camera: op=State serial=184678
06:28:56 GetSingleValue result=40  Value=cccccccc
06:28:56 SkyScan query
06:28:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:56 Parameters OK
06:28:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:56 Set A/D data flow result=40
06:28:56 Set A/D channel type result=40
06:28:56 Set A/D encoding result=40
06:28:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:56 Set channel filter=0.000000e+000  result=40
06:28:56 Config A/D  Result=40
06:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:56 Get A/D filter: -9.255963e+061  result=40
06:28:56 Get A/D value=-858993460  result=40
06:28:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:28:56 Parameters OK
06:28:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:28:56 Set A/D data flow result=40
06:28:56 Set A/D channel type result=40
06:28:56 Set A/D encoding result=40
06:28:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:28:56 Set channel filter=0.000000e+000  result=40
06:28:56 Config A/D  Result=40
06:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:28:56 Get A/D filter: -9.255963e+061  result=40
06:28:56 Get A/D value=-858993460  result=40
06:28:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:28:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:28:56 Aux=
06:28:56 Message to Camera, serial 184678 queued
06:29:32 Received message from Master: op=PointingHead serial=184690
06:29:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:29:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:29:32 Point started: ret=0
06:29:32 point_skyscan result=0
06:29:33 Check angles
06:29:33 SkyScan query
06:29:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:29:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:29:34 Message to Master queued w/err=0: serial=184690 error=0
06:29:39 Received message from Master: op=Filter serial=184691
06:29:39 Color wheel filter change from 0 to 0
06:29:39 FLIGetFilterPos err=0  currentPosition=0
06:29:39 FLIGetStepsRemaining err=0  RemainingSteps=0
06:29:39 Filter is already there-color wheel unchanged
06:29:39 Received message from Master: op=Shutter serial=184692
06:29:39 Shutter LASER close
06:29:39 Received message from Camera: op=State serial=184694
06:29:39 GetSingleValue result=40  Value=cccccccc
06:29:39 SkyScan query
06:29:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:29:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:29:39 Parameters OK
06:29:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:29:39 Set A/D data flow result=40
06:29:39 Set A/D channel type result=40
06:29:39 Set A/D encoding result=40
06:29:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:29:39 Set channel filter=0.000000e+000  result=40
06:29:39 Config A/D  Result=40
06:29:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:29:39 Get A/D filter: -9.255963e+061  result=40
06:29:39 Get A/D value=-858993460  result=40
06:29:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:29:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:29:39 Parameters OK
06:29:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:29:39 Set A/D data flow result=40
06:29:39 Set A/D channel type result=40
06:29:39 Set A/D encoding result=40
06:29:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:29:39 Set channel filter=0.000000e+000  result=40
06:29:39 Config A/D  Result=40
06:29:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:29:39 Get A/D filter: -9.255963e+061  result=40
06:29:39 Get A/D value=-858993460  result=40
06:29:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:29:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:29:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:29:39 Aux=
06:29:39 Message to Camera, serial 184694 queued
06:30:16 Received message from Master: op=PointingHead serial=184707
06:30:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:30:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:30:17 Point started: ret=0
06:30:17 point_skyscan result=0
06:30:17 Check angles
06:30:17 SkyScan query
06:30:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:30:18 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:30:18 Message to Master queued w/err=0: serial=184707 error=0
06:30:23 Received message from Master: op=Filter serial=184708
06:30:23 Color wheel filter change from 0 to 0
06:30:23 FLIGetFilterPos err=0  currentPosition=0
06:30:23 FLIGetStepsRemaining err=0  RemainingSteps=0
06:30:23 Filter is already there-color wheel unchanged
06:30:23 Received message from Master: op=Shutter serial=184709
06:30:23 Shutter LASER close
06:30:23 Received message from Camera: op=State serial=184711
06:30:23 GetSingleValue result=40  Value=cccccccc
06:30:23 SkyScan query
06:30:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:30:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:30:24 Parameters OK
06:30:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:30:24 Set A/D data flow result=40
06:30:24 Set A/D channel type result=40
06:30:24 Set A/D encoding result=40
06:30:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:30:24 Set channel filter=0.000000e+000  result=40
06:30:24 Config A/D  Result=40
06:30:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:30:24 Get A/D filter: -9.255963e+061  result=40
06:30:24 Get A/D value=-858993460  result=40
06:30:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:30:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:30:24 Parameters OK
06:30:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:30:24 Set A/D data flow result=40
06:30:24 Set A/D channel type result=40
06:30:24 Set A/D encoding result=40
06:30:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:30:24 Set channel filter=0.000000e+000  result=40
06:30:24 Config A/D  Result=40
06:30:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:30:24 Get A/D filter: -9.255963e+061  result=40
06:30:24 Get A/D value=-858993460  result=40
06:30:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:30:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:30:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:30:24 Aux=
06:30:24 Message to Camera, serial 184711 queued
06:31:00 Received message from Master: op=PointingHead serial=184723
06:31:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:31:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:31:00 Point started: ret=0
06:31:00 point_skyscan result=0
06:31:01 Check angles
06:31:01 SkyScan query
06:31:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:31:01 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:31:01 Message to Master queued w/err=0: serial=184723 error=0
06:31:06 Received message from Master: op=Filter serial=184724
06:31:06 Color wheel filter change from 0 to 0
06:31:06 FLIGetFilterPos err=0  currentPosition=0
06:31:06 FLIGetStepsRemaining err=0  RemainingSteps=0
06:31:06 Filter is already there-color wheel unchanged
06:31:06 Received message from Master: op=Shutter serial=184725
06:31:06 Shutter LASER close
06:31:07 Received message from Camera: op=State serial=184727
06:31:07 GetSingleValue result=40  Value=cccccccc
06:31:07 SkyScan query
06:31:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:31:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:31:07 Parameters OK
06:31:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:31:07 Set A/D data flow result=40
06:31:07 Set A/D channel type result=40
06:31:07 Set A/D encoding result=40
06:31:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:31:07 Set channel filter=0.000000e+000  result=40
06:31:07 Config A/D  Result=40
06:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:31:07 Get A/D filter: -9.255963e+061  result=40
06:31:07 Get A/D value=-858993460  result=40
06:31:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:31:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:31:07 Parameters OK
06:31:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:31:07 Set A/D data flow result=40
06:31:07 Set A/D channel type result=40
06:31:07 Set A/D encoding result=40
06:31:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:31:07 Set channel filter=0.000000e+000  result=40
06:31:07 Config A/D  Result=40
06:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:31:07 Get A/D filter: -9.255963e+061  result=40
06:31:07 Get A/D value=-858993460  result=40
06:31:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:31:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:31:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:31:07 Aux=
06:31:07 Message to Camera, serial 184727 queued
06:31:44 Received message from Master: op=PointingHead serial=184740
06:31:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:31:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:31:44 Point started: ret=0
06:31:44 point_skyscan result=0
06:31:45 Check angles
06:31:45 SkyScan query
06:31:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.295<-13553  Statuses=0008 0009
06:31:46 Msec=0  True Az=112.995  Ze=-23.295  Az status=0008  Ze status=0009
06:31:46 Check angles
06:31:46 SkyScan query
06:31:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.715<-14981  Statuses=0008 0009
06:31:46 Msec=750  True Az=112.995  Ze=-44.715  Az status=0008  Ze status=0009
06:31:47 Check angles
06:31:47 SkyScan query
06:31:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.09<-16406  Statuses=0008 0009
06:31:47 Msec=1500  True Az=112.995  Ze=-66.09  Az status=0008  Ze status=0009
06:31:47 Check angles
06:31:47 SkyScan query
06:31:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.045<-17803  Statuses=0008 0009
06:31:48 Msec=2250  True Az=112.995  Ze=-87.045  Az status=0008  Ze status=0009
06:31:48 Check angles
06:31:48 SkyScan query
06:31:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.985<-19199  Statuses=0008 0009
06:31:49 Msec=3000  True Az=112.995  Ze=-107.985  Az status=0008  Ze status=0009
06:31:49 Check angles
06:31:49 SkyScan query
06:31:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.94<-20596  Statuses=0008 0009
06:31:49 Msec=3750  True Az=112.995  Ze=-128.94  Az status=0008  Ze status=0009
06:31:50 Check angles
06:31:50 SkyScan query
06:31:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.895<-21993  Statuses=0008 0009
06:31:50 Msec=4500  True Az=112.995  Ze=-149.895  Az status=0008  Ze status=0009
06:31:50 Check angles
06:31:50 SkyScan query
06:31:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.12<-23408  Statuses=0008 0009
06:31:51 Msec=5250  True Az=112.995  Ze=-171.12  Az status=0008  Ze status=0009
06:31:51 Check angles
06:31:51 SkyScan query
06:31:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:31:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:31:52 Message to Master queued w/err=0: serial=184740 error=0
06:31:57 Received message from Master: op=Filter serial=184741
06:31:57 Color wheel filter change from 0 to 0
06:31:57 FLIGetFilterPos err=0  currentPosition=0
06:31:57 FLIGetStepsRemaining err=0  RemainingSteps=0
06:31:57 Filter is already there-color wheel unchanged
06:31:57 Received message from Master: op=Shutter serial=184742
06:31:57 Shutter LASER open
06:31:57 Received message from Camera: op=State serial=184744
06:31:57 GetSingleValue result=40  Value=cccccccc
06:31:57 SkyScan query
06:31:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:31:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:31:58 Parameters OK
06:31:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:31:58 Set A/D data flow result=40
06:31:58 Set A/D channel type result=40
06:31:58 Set A/D encoding result=40
06:31:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:31:58 Set channel filter=0.000000e+000  result=40
06:31:58 Config A/D  Result=40
06:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:31:58 Get A/D filter: -9.255963e+061  result=40
06:31:58 Get A/D value=-858993460  result=40
06:31:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:31:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:31:58 Parameters OK
06:31:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:31:58 Set A/D data flow result=40
06:31:58 Set A/D channel type result=40
06:31:58 Set A/D encoding result=40
06:31:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:31:58 Set channel filter=0.000000e+000  result=40
06:31:58 Config A/D  Result=40
06:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:31:58 Get A/D filter: -9.255963e+061  result=40
06:31:58 Get A/D value=-858993460  result=40
06:31:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:31:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:31:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:31:58 Aux=
06:31:58 Message to Camera, serial 184744 queued
06:32:06 Received message from Master: op=Shutter serial=184754
06:32:06 Shutter LASER close
06:32:07 Received message from Master: op=PointingHead serial=184758
06:32:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:32:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:32:07 Point started: ret=0
06:32:07 point_skyscan result=0
06:32:08 Check angles
06:32:08 SkyScan query
06:32:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
06:32:08 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
06:32:08 Check angles
06:32:08 SkyScan query
06:32:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
06:32:09 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
06:32:09 Check angles
06:32:09 SkyScan query
06:32:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
06:32:10 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
06:32:10 Check angles
06:32:10 SkyScan query
06:32:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.815<-17321  Statuses=0008 0009
06:32:11 Msec=2250  True Az=112.995  Ze=-79.815  Az status=0008  Ze status=0009
06:32:11 Check angles
06:32:11 SkyScan query
06:32:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.875<-15925  Statuses=0008 0009
06:32:11 Msec=3000  True Az=112.995  Ze=-58.875  Az status=0008  Ze status=0009
06:32:11 Check angles
06:32:11 SkyScan query
06:32:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.905<-14527  Statuses=0008 0009
06:32:12 Msec=3750  True Az=112.995  Ze=-37.905  Az status=0008  Ze status=0009
06:32:12 Check angles
06:32:12 SkyScan query
06:32:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.485<-13099  Statuses=0008 0009
06:32:13 Msec=4500  True Az=112.995  Ze=-16.485  Az status=0008  Ze status=0009
06:32:13 Check angles
06:32:13 SkyScan query
06:32:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.38<-11708  Statuses=0008 0009
06:32:14 Msec=5250  True Az=112.995  Ze=4.38  Az status=0008  Ze status=0009
06:32:14 Check angles
06:32:14 SkyScan query
06:32:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:32:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:32:14 Message to Master queued w/err=0: serial=184758 error=0
06:32:19 Received message from Master: op=Filter serial=184759
06:32:19 Color wheel filter change from 0 to 0
06:32:19 FLIGetFilterPos err=0  currentPosition=0
06:32:19 FLIGetStepsRemaining err=0  RemainingSteps=0
06:32:19 Filter is already there-color wheel unchanged
06:32:19 Received message from Master: op=Shutter serial=184760
06:32:19 Shutter LASER close
06:32:20 Received message from Camera: op=State serial=184762
06:32:20 GetSingleValue result=40  Value=cccccccc
06:32:20 SkyScan query
06:32:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:32:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:32:20 Parameters OK
06:32:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:32:20 Set A/D data flow result=40
06:32:20 Set A/D channel type result=40
06:32:20 Set A/D encoding result=40
06:32:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:32:20 Set channel filter=0.000000e+000  result=40
06:32:20 Config A/D  Result=40
06:32:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:32:20 Get A/D filter: -9.255963e+061  result=40
06:32:20 Get A/D value=-858993460  result=40
06:32:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:32:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:32:20 Parameters OK
06:32:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:32:20 Set A/D data flow result=40
06:32:20 Set A/D channel type result=40
06:32:20 Set A/D encoding result=40
06:32:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:32:20 Set channel filter=0.000000e+000  result=40
06:32:20 Config A/D  Result=40
06:32:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:32:20 Get A/D filter: -9.255963e+061  result=40
06:32:20 Get A/D value=-858993460  result=40
06:32:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:32:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:32:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:32:20 Aux=
06:32:20 Message to Camera, serial 184762 queued
06:32:57 Received message from Master: op=PointingHead serial=184775
06:32:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:32:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:32:57 Point started: ret=0
06:32:57 point_skyscan result=0
06:32:58 Check angles
06:32:58 SkyScan query
06:32:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:32:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:32:59 Message to Master queued w/err=0: serial=184775 error=0
06:33:04 Received message from Master: op=Filter serial=184776
06:33:04 Color wheel filter change from 0 to 0
06:33:04 FLIGetFilterPos err=0  currentPosition=0
06:33:04 FLIGetStepsRemaining err=0  RemainingSteps=0
06:33:04 Filter is already there-color wheel unchanged
06:33:04 Received message from Master: op=Shutter serial=184777
06:33:04 Shutter LASER close
06:33:04 Received message from Camera: op=State serial=184779
06:33:04 GetSingleValue result=40  Value=cccccccc
06:33:04 SkyScan query
06:33:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:33:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:33:05 Parameters OK
06:33:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:33:05 Set A/D data flow result=40
06:33:05 Set A/D channel type result=40
06:33:05 Set A/D encoding result=40
06:33:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:33:05 Set channel filter=0.000000e+000  result=40
06:33:05 Config A/D  Result=40
06:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:33:05 Get A/D filter: -9.255963e+061  result=40
06:33:05 Get A/D value=-858993460  result=40
06:33:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:33:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:33:05 Parameters OK
06:33:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:33:05 Set A/D data flow result=40
06:33:05 Set A/D channel type result=40
06:33:05 Set A/D encoding result=40
06:33:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:33:05 Set channel filter=0.000000e+000  result=40
06:33:05 Config A/D  Result=40
06:33:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:33:05 Get A/D filter: -9.255963e+061  result=40
06:33:05 Get A/D value=-858993460  result=40
06:33:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:33:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:33:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:33:05 Aux=
06:33:05 Message to Camera, serial 184779 queued
06:33:36 Received message from Master: op=Identify serial=184784
06:33:41 Received message from Master: op=PointingHead serial=184795
06:33:41 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:33:41 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:33:42 Point started: ret=0
06:33:42 point_skyscan result=0
06:33:42 Check angles
06:33:42 SkyScan query
06:33:43 SkyScan query done: ret=0  az=136.125<-9075  ze=-6.51<-12434  Statuses=0009 0008
06:33:43 Msec=0  True Az=136.125  Ze=-6.51  Az status=0009  Ze status=0008
06:33:43 Check angles
06:33:43 SkyScan query
06:33:44 SkyScan query done: ret=0  az=153.51<-10234  ze=-6.495<-12433  Statuses=0009 0008
06:33:44 Msec=750  True Az=153.51  Ze=-6.495  Az status=0009  Ze status=0008
06:33:44 Check angles
06:33:44 SkyScan query
06:33:45 SkyScan query done: ret=0  az=170.97<-11398  ze=-6.495<-12433  Statuses=0009 0008
06:33:45 Msec=1500  True Az=170.97  Ze=-6.495  Az status=0009  Ze status=0008
06:33:45 Check angles
06:33:45 SkyScan query
06:33:45 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:33:45 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:33:45 Message to Master queued w/err=0: serial=184795 error=0
06:33:50 Received message from Master: op=Filter serial=184796
06:33:50 Color wheel filter change from 0 to 0
06:33:50 FLIGetFilterPos err=0  currentPosition=0
06:33:50 FLIGetStepsRemaining err=0  RemainingSteps=0
06:33:50 Filter is already there-color wheel unchanged
06:33:50 Received message from Master: op=Shutter serial=184797
06:33:50 Shutter LASER close
06:33:51 Received message from Camera: op=State serial=184799
06:33:51 GetSingleValue result=40  Value=cccccccc
06:33:51 SkyScan query
06:33:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:33:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:33:51 Parameters OK
06:33:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:33:51 Set A/D data flow result=40
06:33:51 Set A/D channel type result=40
06:33:51 Set A/D encoding result=40
06:33:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:33:51 Set channel filter=0.000000e+000  result=40
06:33:51 Config A/D  Result=40
06:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:33:51 Get A/D filter: -9.255963e+061  result=40
06:33:51 Get A/D value=-858993460  result=40
06:33:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:33:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:33:51 Parameters OK
06:33:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:33:51 Set A/D data flow result=40
06:33:51 Set A/D channel type result=40
06:33:51 Set A/D encoding result=40
06:33:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:33:51 Set channel filter=0.000000e+000  result=40
06:33:51 Config A/D  Result=40
06:33:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:33:51 Get A/D filter: -9.255963e+061  result=40
06:33:51 Get A/D value=-858993460  result=40
06:33:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:33:51 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:33:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:33:51 Aux=
[UTC 2019-3-9  06:33:51]
06:33:51 Message to Camera, serial 184799 queued
06:34:28 Received message from Master: op=PointingHead serial=184812
06:34:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:34:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:34:28 Point started: ret=0
06:34:28 point_skyscan result=0
06:34:29 Check angles
06:34:29 SkyScan query
06:34:30 SkyScan query done: ret=0  az=152.73<-10182  ze=6.51<-11566  Statuses=0009 0008
06:34:30 Msec=0  True Az=152.73  Ze=6.51  Az status=0009  Ze status=0008
06:34:30 Check angles
06:34:30 SkyScan query
06:34:30 SkyScan query done: ret=0  az=134.925<-8995  ze=6.495<-11567  Statuses=0009 0008
06:34:30 Msec=750  True Az=134.925  Ze=6.495  Az status=0009  Ze status=0008
06:34:31 Check angles
06:34:31 SkyScan query
06:34:31 SkyScan query done: ret=0  az=117.48<-7832  ze=6.495<-11567  Statuses=0009 0008
06:34:31 Msec=1500  True Az=117.48  Ze=6.495  Az status=0009  Ze status=0008
06:34:31 Check angles
06:34:31 SkyScan query
06:34:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:34:32 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:34:32 Message to Master queued w/err=0: serial=184812 error=0
06:34:37 Received message from Master: op=Filter serial=184813
06:34:37 Color wheel filter change from 0 to 0
06:34:37 FLIGetFilterPos err=0  currentPosition=0
06:34:37 FLIGetStepsRemaining err=0  RemainingSteps=0
06:34:37 Filter is already there-color wheel unchanged
06:34:37 Received message from Master: op=Shutter serial=184814
06:34:37 Shutter LASER close
06:34:37 Received message from Camera: op=State serial=184816
06:34:37 GetSingleValue result=40  Value=cccccccc
06:34:37 SkyScan query
06:34:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:34:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:34:38 Parameters OK
06:34:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:34:38 Set A/D data flow result=40
06:34:38 Set A/D channel type result=40
06:34:38 Set A/D encoding result=40
06:34:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:34:38 Set channel filter=0.000000e+000  result=40
06:34:38 Config A/D  Result=40
06:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:34:38 Get A/D filter: -9.255963e+061  result=40
06:34:38 Get A/D value=-858993460  result=40
06:34:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:34:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:34:38 Parameters OK
06:34:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:34:38 Set A/D data flow result=40
06:34:38 Set A/D channel type result=40
06:34:38 Set A/D encoding result=40
06:34:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:34:38 Set channel filter=0.000000e+000  result=40
06:34:38 Config A/D  Result=40
06:34:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:34:38 Get A/D filter: -9.255963e+061  result=40
06:34:38 Get A/D value=-858993460  result=40
06:34:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:34:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:34:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:34:38 Aux=
06:34:38 Message to Camera, serial 184816 queued
06:35:15 Received message from Master: op=PointingHead serial=184829
06:35:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:35:15 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:35:15 Point started: ret=0
06:35:15 point_skyscan result=0
06:35:16 Check angles
06:35:16 SkyScan query
06:35:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
06:35:16 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
06:35:16 Check angles
06:35:16 SkyScan query
06:35:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.52<-14968  Statuses=0008 0009
06:35:17 Msec=750  True Az=112.995  Ze=-44.52  Az status=0008  Ze status=0009
06:35:17 Check angles
06:35:17 SkyScan query
06:35:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.895<-16393  Statuses=0008 0009
06:35:18 Msec=1500  True Az=112.995  Ze=-65.895  Az status=0008  Ze status=0009
06:35:18 Check angles
06:35:18 SkyScan query
06:35:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
06:35:19 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
06:35:19 Check angles
06:35:19 SkyScan query
06:35:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.79<-19186  Statuses=0008 0009
06:35:19 Msec=3000  True Az=112.995  Ze=-107.79  Az status=0008  Ze status=0009
06:35:19 Check angles
06:35:19 SkyScan query
06:35:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.745<-20583  Statuses=0008 0009
06:35:20 Msec=3750  True Az=112.995  Ze=-128.745  Az status=0008  Ze status=0009
06:35:20 Check angles
06:35:20 SkyScan query
06:35:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
06:35:21 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
06:35:21 Check angles
06:35:21 SkyScan query
06:35:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
06:35:22 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
06:35:22 Check angles
06:35:22 SkyScan query
06:35:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:35:22 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:35:22 Message to Master queued w/err=0: serial=184829 error=0
06:35:27 Received message from Master: op=Filter serial=184830
06:35:27 Color wheel filter change from 0 to 0
06:35:27 FLIGetFilterPos err=0  currentPosition=0
06:35:27 FLIGetStepsRemaining err=0  RemainingSteps=0
06:35:27 Filter is already there-color wheel unchanged
06:35:27 Received message from Master: op=Shutter serial=184831
06:35:27 Shutter LASER open
06:35:28 Received message from Camera: op=State serial=184833
06:35:28 GetSingleValue result=40  Value=cccccccc
06:35:28 SkyScan query
06:35:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:35:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:28 Parameters OK
06:35:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:28 Set A/D data flow result=40
06:35:28 Set A/D channel type result=40
06:35:28 Set A/D encoding result=40
06:35:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:28 Set channel filter=0.000000e+000  result=40
06:35:28 Config A/D  Result=40
06:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:28 Get A/D filter: -9.255963e+061  result=40
06:35:28 Get A/D value=-858993460  result=40
06:35:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:28 Parameters OK
06:35:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:28 Set A/D data flow result=40
06:35:28 Set A/D channel type result=40
06:35:28 Set A/D encoding result=40
06:35:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:28 Set channel filter=0.000000e+000  result=40
06:35:28 Config A/D  Result=40
06:35:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:28 Get A/D filter: -9.255963e+061  result=40
06:35:28 Get A/D value=-858993460  result=40
06:35:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:35:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:35:28 Aux=
06:35:28 Message to Camera, serial 184833 queued
06:35:37 Received message from Master: op=Shutter serial=184843
06:35:37 Shutter LASER close
06:35:37 Received message from Master: op=PointingHead serial=184847
06:35:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:35:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:35:37 Point started: ret=0
06:35:37 point_skyscan result=0
06:35:38 Check angles
06:35:38 SkyScan query
06:35:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
06:35:39 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
06:35:39 Check angles
06:35:39 SkyScan query
06:35:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.65<-20110  Statuses=0008 0009
06:35:39 Msec=750  True Az=112.995  Ze=-121.65  Az status=0008  Ze status=0009
06:35:40 Check angles
06:35:40 SkyScan query
06:35:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.26<-18684  Statuses=0008 0009
06:35:40 Msec=1500  True Az=112.995  Ze=-100.26  Az status=0008  Ze status=0009
06:35:40 Check angles
06:35:40 SkyScan query
06:35:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.29<-17286  Statuses=0008 0009
06:35:41 Msec=2250  True Az=112.995  Ze=-79.29  Az status=0008  Ze status=0009
06:35:41 Check angles
06:35:41 SkyScan query
06:35:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.9<-15860  Statuses=0008 0009
06:35:42 Msec=3000  True Az=112.995  Ze=-57.9  Az status=0008  Ze status=0009
06:35:42 Check angles
06:35:42 SkyScan query
06:35:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.495<-14433  Statuses=0008 0009
06:35:43 Msec=3750  True Az=112.995  Ze=-36.495  Az status=0008  Ze status=0009
06:35:43 Check angles
06:35:43 SkyScan query
06:35:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.555<-13037  Statuses=0008 0009
06:35:43 Msec=4500  True Az=112.995  Ze=-15.555  Az status=0008  Ze status=0009
06:35:43 Check angles
06:35:43 SkyScan query
06:35:44 SkyScan query done: ret=0  az=112.995<-7533  ze=5.085<-11661  Statuses=0008 0009
06:35:44 Msec=5250  True Az=112.995  Ze=5.085  Az status=0008  Ze status=0009
06:35:44 Check angles
06:35:44 SkyScan query
06:35:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:35:45 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:35:45 Message to Master queued w/err=0: serial=184847 error=0
06:35:50 Received message from Master: op=Filter serial=184848
06:35:50 Color wheel filter change from 0 to 0
06:35:50 FLIGetFilterPos err=0  currentPosition=0
06:35:50 FLIGetStepsRemaining err=0  RemainingSteps=0
06:35:50 Filter is already there-color wheel unchanged
06:35:50 Received message from Master: op=Shutter serial=184849
06:35:50 Shutter LASER close
06:35:50 Received message from Camera: op=State serial=184851
06:35:50 GetSingleValue result=40  Value=cccccccc
06:35:50 SkyScan query
06:35:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:51 Parameters OK
06:35:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:51 Set A/D data flow result=40
06:35:51 Set A/D channel type result=40
06:35:51 Set A/D encoding result=40
06:35:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:51 Set channel filter=0.000000e+000  result=40
06:35:51 Config A/D  Result=40
06:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:51 Get A/D filter: -9.255963e+061  result=40
06:35:51 Get A/D value=-858993460  result=40
06:35:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:35:51 Parameters OK
06:35:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:35:51 Set A/D data flow result=40
06:35:51 Set A/D channel type result=40
06:35:51 Set A/D encoding result=40
06:35:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:35:51 Set channel filter=0.000000e+000  result=40
06:35:51 Config A/D  Result=40
06:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:35:51 Get A/D filter: -9.255963e+061  result=40
06:35:51 Get A/D value=-858993460  result=40
06:35:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:35:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:35:51 Aux=
06:35:51 Message to Camera, serial 184851 queued
06:36:28 Received message from Master: op=PointingHead serial=184864
06:36:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:36:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:36:28 Point started: ret=0
06:36:28 point_skyscan result=0
06:36:29 Check angles
06:36:29 SkyScan query
06:36:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:36:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:36:29 Message to Master queued w/err=0: serial=184864 error=0
06:36:34 Received message from Master: op=Filter serial=184865
06:36:34 Color wheel filter change from 0 to 0
06:36:34 FLIGetFilterPos err=0  currentPosition=0
06:36:34 FLIGetStepsRemaining err=0  RemainingSteps=0
06:36:34 Filter is already there-color wheel unchanged
06:36:34 Received message from Master: op=Shutter serial=184866
06:36:34 Shutter LASER close
06:36:34 Received message from Camera: op=State serial=184868
06:36:34 GetSingleValue result=40  Value=cccccccc
06:36:34 SkyScan query
06:36:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:36:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:36:35 Parameters OK
06:36:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:36:35 Set A/D data flow result=40
06:36:35 Set A/D channel type result=40
06:36:35 Set A/D encoding result=40
06:36:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:36:35 Set channel filter=0.000000e+000  result=40
06:36:35 Config A/D  Result=40
06:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:36:35 Get A/D filter: -9.255963e+061  result=40
06:36:35 Get A/D value=-858993460  result=40
06:36:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:36:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:36:35 Parameters OK
06:36:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:36:35 Set A/D data flow result=40
06:36:35 Set A/D channel type result=40
06:36:35 Set A/D encoding result=40
06:36:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:36:35 Set channel filter=0.000000e+000  result=40
06:36:35 Config A/D  Result=40
06:36:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:36:35 Get A/D filter: -9.255963e+061  result=40
06:36:35 Get A/D value=-858993460  result=40
06:36:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:36:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:36:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:36:35 Aux=
06:36:35 Message to Camera, serial 184868 queued
06:37:12 Received message from Master: op=PointingHead serial=184881
06:37:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:37:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:37:12 Point started: ret=0
06:37:12 point_skyscan result=0
06:37:13 Check angles
06:37:13 SkyScan query
06:37:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:37:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:37:13 Message to Master queued w/err=0: serial=184881 error=0
06:37:18 Received message from Master: op=Filter serial=184882
06:37:18 Color wheel filter change from 0 to 0
06:37:18 FLIGetFilterPos err=0  currentPosition=0
06:37:18 FLIGetStepsRemaining err=0  RemainingSteps=0
06:37:18 Filter is already there-color wheel unchanged
06:37:19 Received message from Master: op=Shutter serial=184883
06:37:19 Shutter LASER close
06:37:19 Received message from Camera: op=State serial=184885
06:37:19 GetSingleValue result=40  Value=cccccccc
06:37:19 SkyScan query
06:37:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:37:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:37:19 Parameters OK
06:37:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:37:19 Set A/D data flow result=40
06:37:19 Set A/D channel type result=40
06:37:19 Set A/D encoding result=40
06:37:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:37:19 Set channel filter=0.000000e+000  result=40
06:37:19 Config A/D  Result=40
06:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:37:19 Get A/D filter: -9.255963e+061  result=40
06:37:19 Get A/D value=-858993460  result=40
06:37:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:37:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:37:19 Parameters OK
06:37:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:37:19 Set A/D data flow result=40
06:37:19 Set A/D channel type result=40
06:37:19 Set A/D encoding result=40
06:37:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:37:19 Set channel filter=0.000000e+000  result=40
06:37:19 Config A/D  Result=40
06:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:37:19 Get A/D filter: -9.255963e+061  result=40
06:37:19 Get A/D value=-858993460  result=40
06:37:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:37:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:37:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:37:19 Aux=
06:37:19 Message to Camera, serial 184885 queued
06:37:56 Received message from Master: op=PointingHead serial=184898
06:37:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:37:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:37:56 Point started: ret=0
06:37:56 point_skyscan result=0
06:37:57 Check angles
06:37:57 SkyScan query
06:37:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:37:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:37:58 Message to Master queued w/err=0: serial=184898 error=0
06:38:03 Received message from Master: op=Filter serial=184899
06:38:03 Color wheel filter change from 0 to 0
06:38:03 FLIGetFilterPos err=0  currentPosition=0
06:38:03 FLIGetStepsRemaining err=0  RemainingSteps=0
06:38:03 Filter is already there-color wheel unchanged
06:38:03 Received message from Master: op=Shutter serial=184900
06:38:03 Shutter LASER close
06:38:03 Received message from Camera: op=State serial=184902
06:38:03 GetSingleValue result=40  Value=cccccccc
06:38:03 SkyScan query
06:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:38:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:38:04 Parameters OK
06:38:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:38:04 Set A/D data flow result=40
06:38:04 Set A/D channel type result=40
06:38:04 Set A/D encoding result=40
06:38:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:38:04 Set channel filter=0.000000e+000  result=40
06:38:04 Config A/D  Result=40
06:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:38:04 Get A/D filter: -9.255963e+061  result=40
06:38:04 Get A/D value=-858993460  result=40
06:38:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:38:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:38:04 Parameters OK
06:38:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:38:04 Set A/D data flow result=40
06:38:04 Set A/D channel type result=40
06:38:04 Set A/D encoding result=40
06:38:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:38:04 Set channel filter=0.000000e+000  result=40
06:38:04 Config A/D  Result=40
06:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:38:04 Get A/D filter: -9.255963e+061  result=40
06:38:04 Get A/D value=-858993460  result=40
06:38:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:38:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:38:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:38:04 Aux=
06:38:04 Message to Camera, serial 184902 queued
06:38:40 Received message from Master: op=PointingHead serial=184915
06:38:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:38:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:38:41 Point started: ret=0
06:38:41 point_skyscan result=0
06:38:42 Check angles
06:38:42 SkyScan query
06:38:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
06:38:42 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
06:38:42 Check angles
06:38:42 SkyScan query
06:38:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.325<-14955  Statuses=0008 0009
06:38:43 Msec=750  True Az=112.995  Ze=-44.325  Az status=0008  Ze status=0009
06:38:43 Check angles
06:38:43 SkyScan query
06:38:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
06:38:44 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
06:38:44 Check angles
06:38:44 SkyScan query
06:38:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
06:38:44 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
06:38:45 Check angles
06:38:45 SkyScan query
06:38:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.19<-19146  Statuses=0008 0009
06:38:45 Msec=3000  True Az=112.995  Ze=-107.19  Az status=0008  Ze status=0009
06:38:45 Check angles
06:38:45 SkyScan query
06:38:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.145<-20543  Statuses=0008 0009
06:38:46 Msec=3750  True Az=112.995  Ze=-128.145  Az status=0008  Ze status=0009
06:38:46 Check angles
06:38:46 SkyScan query
06:38:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.115<-21941  Statuses=0008 0009
06:38:47 Msec=4500  True Az=112.995  Ze=-149.115  Az status=0008  Ze status=0009
06:38:47 Check angles
06:38:47 SkyScan query
06:38:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.04<-23336  Statuses=0008 0009
06:38:47 Msec=5250  True Az=112.995  Ze=-170.04  Az status=0008  Ze status=0009
06:38:48 Check angles
06:38:48 SkyScan query
06:38:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:38:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:38:48 Message to Master queued w/err=0: serial=184915 error=0
06:38:53 Received message from Master: op=Filter serial=184916
06:38:53 Color wheel filter change from 0 to 0
06:38:53 FLIGetFilterPos err=0  currentPosition=0
06:38:53 FLIGetStepsRemaining err=0  RemainingSteps=0
06:38:53 Filter is already there-color wheel unchanged
06:38:53 Received message from Master: op=Shutter serial=184917
06:38:53 Shutter LASER open
06:38:53 Received message from Camera: op=State serial=184919
06:38:53 GetSingleValue result=40  Value=cccccccc
06:38:53 SkyScan query
06:38:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:38:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:38:54 Parameters OK
06:38:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:38:54 Set A/D data flow result=40
06:38:54 Set A/D channel type result=40
06:38:54 Set A/D encoding result=40
06:38:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:38:54 Set channel filter=0.000000e+000  result=40
06:38:54 Config A/D  Result=40
06:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:38:54 Get A/D filter: -9.255963e+061  result=40
06:38:54 Get A/D value=-858993460  result=40
06:38:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:38:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:38:54 Parameters OK
06:38:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:38:54 Set A/D data flow result=40
06:38:54 Set A/D channel type result=40
06:38:54 Set A/D encoding result=40
06:38:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:38:54 Set channel filter=0.000000e+000  result=40
06:38:54 Config A/D  Result=40
06:38:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:38:54 Get A/D filter: -9.255963e+061  result=40
06:38:54 Get A/D value=-858993460  result=40
06:38:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:38:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:38:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:38:54 Aux=
06:38:54 Message to Camera, serial 184919 queued
06:39:02 Received message from Master: op=Shutter serial=184929
06:39:02 Shutter LASER close
06:39:03 Received message from Master: op=PointingHead serial=184933
06:39:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:39:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:39:03 Point started: ret=0
06:39:03 point_skyscan result=0
06:39:04 Check angles
06:39:04 SkyScan query
06:39:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.905<-21527  Statuses=0008 0009
06:39:05 Msec=0  True Az=112.995  Ze=-142.905  Az status=0008  Ze status=0009
06:39:05 Check angles
06:39:05 SkyScan query
06:39:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
06:39:05 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
06:39:06 Check angles
06:39:06 SkyScan query
06:39:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.56<-18704  Statuses=0008 0009
06:39:06 Msec=1500  True Az=112.995  Ze=-100.56  Az status=0008  Ze status=0009
06:39:06 Check angles
06:39:06 SkyScan query
06:39:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.17<-17278  Statuses=0008 0009
06:39:07 Msec=2250  True Az=112.995  Ze=-79.17  Az status=0008  Ze status=0009
06:39:07 Check angles
06:39:07 SkyScan query
06:39:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.78<-15852  Statuses=0008 0009
06:39:08 Msec=3000  True Az=112.995  Ze=-57.78  Az status=0008  Ze status=0009
06:39:08 Check angles
06:39:08 SkyScan query
06:39:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.825<-14455  Statuses=0008 0009
06:39:09 Msec=3750  True Az=112.995  Ze=-36.825  Az status=0008  Ze status=0009
06:39:09 Check angles
06:39:09 SkyScan query
06:39:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.855<-13057  Statuses=0008 0009
06:39:09 Msec=4500  True Az=112.995  Ze=-15.855  Az status=0008  Ze status=0009
06:39:09 Check angles
06:39:09 SkyScan query
06:39:10 SkyScan query done: ret=0  az=112.995<-7533  ze=4.86<-11676  Statuses=0008 0009
06:39:10 Msec=5250  True Az=112.995  Ze=4.86  Az status=0008  Ze status=0009
06:39:10 Check angles
06:39:10 SkyScan query
06:39:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:39:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:39:11 Message to Master queued w/err=0: serial=184933 error=0
06:39:16 Received message from Master: op=Filter serial=184934
06:39:16 Color wheel filter change from 0 to 0
06:39:16 FLIGetFilterPos err=0  currentPosition=0
06:39:16 FLIGetStepsRemaining err=0  RemainingSteps=0
06:39:16 Filter is already there-color wheel unchanged
06:39:16 Received message from Master: op=Shutter serial=184935
06:39:16 Shutter LASER close
06:39:16 Received message from Camera: op=State serial=184937
06:39:16 GetSingleValue result=40  Value=cccccccc
06:39:16 SkyScan query
06:39:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:39:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:39:17 Parameters OK
06:39:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:39:17 Set A/D data flow result=40
06:39:17 Set A/D channel type result=40
06:39:17 Set A/D encoding result=40
06:39:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:39:17 Set channel filter=0.000000e+000  result=40
06:39:17 Config A/D  Result=40
06:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:39:17 Get A/D filter: -9.255963e+061  result=40
06:39:17 Get A/D value=-858993460  result=40
06:39:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:39:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:39:17 Parameters OK
06:39:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:39:17 Set A/D data flow result=40
06:39:17 Set A/D channel type result=40
06:39:17 Set A/D encoding result=40
06:39:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:39:17 Set channel filter=0.000000e+000  result=40
06:39:17 Config A/D  Result=40
06:39:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:39:17 Get A/D filter: -9.255963e+061  result=40
06:39:17 Get A/D value=-858993460  result=40
06:39:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:39:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:39:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:39:17 Aux=
06:39:17 Message to Camera, serial 184937 queued
06:39:53 Received message from Master: op=PointingHead serial=184949
06:39:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:39:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:39:53 Point started: ret=0
06:39:53 point_skyscan result=0
06:39:54 Check angles
06:39:54 SkyScan query
06:39:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:39:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:39:54 Message to Master queued w/err=0: serial=184949 error=0
06:39:59 Received message from Master: op=Filter serial=184950
06:39:59 Color wheel filter change from 0 to 0
06:39:59 FLIGetFilterPos err=0  currentPosition=0
06:39:59 FLIGetStepsRemaining err=0  RemainingSteps=0
06:39:59 Filter is already there-color wheel unchanged
06:39:59 Received message from Master: op=Shutter serial=184951
06:39:59 Shutter LASER close
06:39:59 Received message from Camera: op=State serial=184953
06:39:59 GetSingleValue result=40  Value=cccccccc
06:39:59 SkyScan query
06:40:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:40:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:40:00 Parameters OK
06:40:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:40:00 Set A/D data flow result=40
06:40:00 Set A/D channel type result=40
06:40:00 Set A/D encoding result=40
06:40:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:40:00 Set channel filter=0.000000e+000  result=40
06:40:00 Config A/D  Result=40
06:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:40:00 Get A/D filter: -9.255963e+061  result=40
06:40:00 Get A/D value=-858993460  result=40
06:40:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:40:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:40:00 Parameters OK
06:40:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:40:00 Set A/D data flow result=40
06:40:00 Set A/D channel type result=40
06:40:00 Set A/D encoding result=40
06:40:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:40:00 Set channel filter=0.000000e+000  result=40
06:40:00 Config A/D  Result=40
06:40:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:40:00 Get A/D filter: -9.255963e+061  result=40
06:40:00 Get A/D value=-858993460  result=40
06:40:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:40:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:40:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:40:00 Aux=
06:40:00 Message to Camera, serial 184953 queued
06:40:37 Received message from Master: op=PointingHead serial=184966
06:40:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:40:37 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:40:37 Point started: ret=0
06:40:37 point_skyscan result=0
06:40:38 Check angles
06:40:38 SkyScan query
06:40:39 SkyScan query done: ret=0  az=135.705<-9047  ze=-6.51<-12434  Statuses=0009 0008
06:40:39 Msec=0  True Az=135.705  Ze=-6.51  Az status=0009  Ze status=0008
06:40:39 Check angles
06:40:39 SkyScan query
06:40:39 SkyScan query done: ret=0  az=153.15<-10210  ze=-6.495<-12433  Statuses=0009 0008
06:40:39 Msec=750  True Az=153.15  Ze=-6.495  Az status=0009  Ze status=0008
06:40:39 Check angles
06:40:39 SkyScan query
06:40:40 SkyScan query done: ret=0  az=171<-11400  ze=-6.495<-12433  Statuses=0009 0008
06:40:40 Msec=1500  True Az=171  Ze=-6.495  Az status=0009  Ze status=0008
06:40:40 Check angles
06:40:40 SkyScan query
06:40:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:40:41 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:40:41 Message to Master queued w/err=0: serial=184966 error=0
06:40:46 Received message from Master: op=Filter serial=184967
06:40:46 Color wheel filter change from 0 to 0
06:40:46 FLIGetFilterPos err=0  currentPosition=0
06:40:46 FLIGetStepsRemaining err=0  RemainingSteps=0
06:40:46 Filter is already there-color wheel unchanged
06:40:46 Received message from Master: op=Shutter serial=184968
06:40:46 Shutter LASER close
06:40:46 Received message from Camera: op=State serial=184970
06:40:46 GetSingleValue result=40  Value=cccccccc
06:40:46 SkyScan query
06:40:47 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:40:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:40:47 Parameters OK
06:40:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:40:47 Set A/D data flow result=40
06:40:47 Set A/D channel type result=40
06:40:47 Set A/D encoding result=40
06:40:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:40:47 Set channel filter=0.000000e+000  result=40
06:40:47 Config A/D  Result=40
06:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:40:47 Get A/D filter: -9.255963e+061  result=40
06:40:47 Get A/D value=-858993460  result=40
06:40:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:40:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:40:47 Parameters OK
06:40:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:40:47 Set A/D data flow result=40
06:40:47 Set A/D channel type result=40
06:40:47 Set A/D encoding result=40
06:40:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:40:47 Set channel filter=0.000000e+000  result=40
06:40:47 Config A/D  Result=40
06:40:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:40:47 Get A/D filter: -9.255963e+061  result=40
06:40:47 Get A/D value=-858993460  result=40
06:40:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:40:47 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:40:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:40:47 Aux=
06:40:47 Message to Camera, serial 184970 queued
06:41:23 Received message from Master: op=PointingHead serial=184983
06:41:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:41:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:41:24 Point started: ret=0
06:41:24 point_skyscan result=0
06:41:25 Check angles
06:41:25 SkyScan query
06:41:25 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
06:41:25 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
06:41:25 Check angles
06:41:25 SkyScan query
06:41:26 SkyScan query done: ret=0  az=135.225<-9015  ze=6.495<-11567  Statuses=0009 0008
06:41:26 Msec=750  True Az=135.225  Ze=6.495  Az status=0009  Ze status=0008
06:41:26 Check angles
06:41:26 SkyScan query
06:41:27 SkyScan query done: ret=0  az=117.645<-7843  ze=6.495<-11567  Statuses=0009 0008
06:41:27 Msec=1500  True Az=117.645  Ze=6.495  Az status=0009  Ze status=0008
06:41:27 Check angles
06:41:27 SkyScan query
06:41:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:41:27 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:41:27 Message to Master queued w/err=0: serial=184983 error=0
06:41:32 Received message from Master: op=Filter serial=184984
06:41:32 Color wheel filter change from 0 to 0
06:41:32 FLIGetFilterPos err=0  currentPosition=0
06:41:32 FLIGetStepsRemaining err=0  RemainingSteps=0
06:41:32 Filter is already there-color wheel unchanged
06:41:33 Received message from Master: op=Shutter serial=184985
06:41:33 Shutter LASER close
06:41:33 Received message from Camera: op=State serial=184987
06:41:33 GetSingleValue result=40  Value=cccccccc
06:41:33 SkyScan query
06:41:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:41:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:41:33 Parameters OK
06:41:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:41:33 Set A/D data flow result=40
06:41:33 Set A/D channel type result=40
06:41:33 Set A/D encoding result=40
06:41:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:41:33 Set channel filter=0.000000e+000  result=40
06:41:33 Config A/D  Result=40
06:41:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:41:33 Get A/D filter: -9.255963e+061  result=40
06:41:33 Get A/D value=-858993460  result=40
06:41:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:41:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:41:33 Parameters OK
06:41:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:41:33 Set A/D data flow result=40
06:41:33 Set A/D channel type result=40
06:41:33 Set A/D encoding result=40
06:41:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:41:33 Set channel filter=0.000000e+000  result=40
06:41:33 Config A/D  Result=40
06:41:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:41:33 Get A/D filter: -9.255963e+061  result=40
06:41:33 Get A/D value=-858993460  result=40
06:41:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:41:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:41:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:41:33 Aux=
06:41:33 Message to Camera, serial 184987 queued
06:42:10 Received message from Master: op=PointingHead serial=185000
06:42:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:42:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:42:10 Point started: ret=0
06:42:10 point_skyscan result=0
06:42:11 Check angles
06:42:11 SkyScan query
06:42:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.595<-13573  Statuses=0008 0009
06:42:12 Msec=0  True Az=112.995  Ze=-23.595  Az status=0008  Ze status=0009
06:42:12 Check angles
06:42:12 SkyScan query
06:42:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.67<-14978  Statuses=0008 0009
06:42:12 Msec=750  True Az=112.995  Ze=-44.67  Az status=0008  Ze status=0009
06:42:13 Check angles
06:42:13 SkyScan query
06:42:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
06:42:13 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
06:42:13 Check angles
06:42:13 SkyScan query
06:42:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.895<-17793  Statuses=0008 0009
06:42:14 Msec=2250  True Az=112.995  Ze=-86.895  Az status=0008  Ze status=0009
06:42:14 Check angles
06:42:14 SkyScan query
06:42:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.415<-19161  Statuses=0008 0009
06:42:15 Msec=3000  True Az=112.995  Ze=-107.415  Az status=0008  Ze status=0009
06:42:15 Check angles
06:42:15 SkyScan query
06:42:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.355<-20557  Statuses=0008 0009
06:42:15 Msec=3750  True Az=112.995  Ze=-128.355  Az status=0008  Ze status=0009
06:42:16 Check angles
06:42:16 SkyScan query
06:42:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.325<-21955  Statuses=0008 0009
06:42:16 Msec=4500  True Az=112.995  Ze=-149.325  Az status=0008  Ze status=0009
06:42:16 Check angles
06:42:16 SkyScan query
06:42:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.265<-23351  Statuses=0008 0009
06:42:17 Msec=5250  True Az=112.995  Ze=-170.265  Az status=0008  Ze status=0009
06:42:17 Check angles
06:42:17 SkyScan query
06:42:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:42:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:42:18 Message to Master queued w/err=0: serial=185000 error=0
06:42:23 Received message from Master: op=Filter serial=185001
06:42:23 Color wheel filter change from 0 to 0
06:42:23 FLIGetFilterPos err=0  currentPosition=0
06:42:23 FLIGetStepsRemaining err=0  RemainingSteps=0
06:42:23 Filter is already there-color wheel unchanged
06:42:23 Received message from Master: op=Shutter serial=185002
06:42:23 Shutter LASER open
06:42:23 Received message from Camera: op=State serial=185004
06:42:23 GetSingleValue result=40  Value=cccccccc
06:42:23 SkyScan query
06:42:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:24 Parameters OK
06:42:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:24 Set A/D data flow result=40
06:42:24 Set A/D channel type result=40
06:42:24 Set A/D encoding result=40
06:42:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:24 Set channel filter=0.000000e+000  result=40
06:42:24 Config A/D  Result=40
06:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:24 Get A/D filter: -9.255963e+061  result=40
06:42:24 Get A/D value=-858993460  result=40
06:42:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:24 Parameters OK
06:42:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:24 Set A/D data flow result=40
06:42:24 Set A/D channel type result=40
06:42:24 Set A/D encoding result=40
06:42:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:24 Set channel filter=0.000000e+000  result=40
06:42:24 Config A/D  Result=40
06:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:24 Get A/D filter: -9.255963e+061  result=40
06:42:24 Get A/D value=-858993460  result=40
06:42:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:42:24 Aux=
06:42:24 Message to Camera, serial 185004 queued
06:42:32 Received message from Master: op=Shutter serial=185014
06:42:32 Shutter LASER close
06:42:32 Received message from Master: op=PointingHead serial=185018
06:42:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:42:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:42:33 Point started: ret=0
06:42:33 point_skyscan result=0
06:42:34 Check angles
06:42:34 SkyScan query
06:42:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
06:42:34 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
06:42:34 Check angles
06:42:34 SkyScan query
06:42:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.58<-20172  Statuses=0008 0009
06:42:35 Msec=750  True Az=112.995  Ze=-122.58  Az status=0008  Ze status=0009
06:42:35 Check angles
06:42:35 SkyScan query
06:42:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.625<-18775  Statuses=0008 0009
06:42:36 Msec=1500  True Az=112.995  Ze=-101.625  Az status=0008  Ze status=0009
06:42:36 Check angles
06:42:36 SkyScan query
06:42:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.625<-17375  Statuses=0008 0009
06:42:36 Msec=2250  True Az=112.995  Ze=-80.625  Az status=0008  Ze status=0009
06:42:37 Check angles
06:42:37 SkyScan query
06:42:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.685<-15979  Statuses=0008 0009
06:42:37 Msec=3000  True Az=112.995  Ze=-59.685  Az status=0008  Ze status=0009
06:42:37 Check angles
06:42:37 SkyScan query
06:42:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.745<-14583  Statuses=0008 0009
06:42:38 Msec=3750  True Az=112.995  Ze=-38.745  Az status=0008  Ze status=0009
06:42:38 Check angles
06:42:38 SkyScan query
06:42:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.775<-13185  Statuses=0008 0009
06:42:39 Msec=4500  True Az=112.995  Ze=-17.775  Az status=0008  Ze status=0009
06:42:39 Check angles
06:42:39 SkyScan query
06:42:39 SkyScan query done: ret=0  az=112.995<-7533  ze=3.18<-11788  Statuses=0008 0009
06:42:39 Msec=5250  True Az=112.995  Ze=3.18  Az status=0008  Ze status=0009
06:42:40 Check angles
06:42:40 SkyScan query
06:42:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:42:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:42:40 Message to Master queued w/err=0: serial=185018 error=0
06:42:45 Received message from Master: op=Filter serial=185019
06:42:45 Color wheel filter change from 0 to 0
06:42:45 FLIGetFilterPos err=0  currentPosition=0
06:42:45 FLIGetStepsRemaining err=0  RemainingSteps=0
06:42:45 Filter is already there-color wheel unchanged
06:42:45 Received message from Master: op=Shutter serial=185020
06:42:45 Shutter LASER close
06:42:45 Received message from Camera: op=State serial=185022
06:42:45 GetSingleValue result=40  Value=cccccccc
06:42:45 SkyScan query
06:42:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:46 Parameters OK
06:42:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:46 Set A/D data flow result=40
06:42:46 Set A/D channel type result=40
06:42:46 Set A/D encoding result=40
06:42:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:46 Set channel filter=0.000000e+000  result=40
06:42:46 Config A/D  Result=40
06:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:46 Get A/D filter: -9.255963e+061  result=40
06:42:46 Get A/D value=-858993460  result=40
06:42:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:42:46 Parameters OK
06:42:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:42:46 Set A/D data flow result=40
06:42:46 Set A/D channel type result=40
06:42:46 Set A/D encoding result=40
06:42:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:42:46 Set channel filter=0.000000e+000  result=40
06:42:46 Config A/D  Result=40
06:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:42:46 Get A/D filter: -9.255963e+061  result=40
06:42:46 Get A/D value=-858993460  result=40
06:42:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:42:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:42:46 Aux=
06:42:46 Message to Camera, serial 185022 queued
06:43:23 Received message from Master: op=PointingHead serial=185035
06:43:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:43:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:43:23 Point started: ret=0
06:43:23 point_skyscan result=0
06:43:24 Check angles
06:43:24 SkyScan query
06:43:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:43:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:43:25 Message to Master queued w/err=0: serial=185035 error=0
06:43:30 Received message from Master: op=Filter serial=185036
06:43:30 Color wheel filter change from 0 to 0
06:43:30 FLIGetFilterPos err=0  currentPosition=0
06:43:30 FLIGetStepsRemaining err=0  RemainingSteps=0
06:43:30 Filter is already there-color wheel unchanged
06:43:30 Received message from Master: op=Shutter serial=185037
06:43:30 Shutter LASER close
06:43:30 Received message from Camera: op=State serial=185039
06:43:30 GetSingleValue result=40  Value=cccccccc
06:43:30 SkyScan query
06:43:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:43:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:43:30 Parameters OK
06:43:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:43:30 Set A/D data flow result=40
06:43:30 Set A/D channel type result=40
06:43:30 Set A/D encoding result=40
06:43:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:43:30 Set channel filter=0.000000e+000  result=40
06:43:30 Config A/D  Result=40
06:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:43:30 Get A/D filter: -9.255963e+061  result=40
06:43:30 Get A/D value=-858993460  result=40
06:43:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:43:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:43:30 Parameters OK
06:43:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:43:30 Set A/D data flow result=40
06:43:30 Set A/D channel type result=40
06:43:30 Set A/D encoding result=40
06:43:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:43:30 Set channel filter=0.000000e+000  result=40
06:43:30 Config A/D  Result=40
06:43:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:43:30 Get A/D filter: -9.255963e+061  result=40
06:43:30 Get A/D value=-858993460  result=40
06:43:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:43:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:43:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:43:30 Aux=
06:43:30 Message to Camera, serial 185039 queued
[UTC 2019-3-9  06:43:48]
06:44:07 Received message from Master: op=PointingHead serial=185052
06:44:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:44:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:44:08 Point started: ret=0
06:44:08 point_skyscan result=0
06:44:08 Check angles
06:44:08 SkyScan query
06:44:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:44:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:44:09 Message to Master queued w/err=0: serial=185052 error=0
06:44:14 Received message from Master: op=Filter serial=185053
06:44:14 Color wheel filter change from 0 to 0
06:44:14 FLIGetFilterPos err=0  currentPosition=0
06:44:14 FLIGetStepsRemaining err=0  RemainingSteps=0
06:44:14 Filter is already there-color wheel unchanged
06:44:14 Received message from Master: op=Shutter serial=185054
06:44:14 Shutter LASER close
06:44:14 Received message from Camera: op=State serial=185056
06:44:14 GetSingleValue result=40  Value=cccccccc
06:44:14 SkyScan query
06:44:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:44:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:44:15 Parameters OK
06:44:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:44:15 Set A/D data flow result=40
06:44:15 Set A/D channel type result=40
06:44:15 Set A/D encoding result=40
06:44:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:44:15 Set channel filter=0.000000e+000  result=40
06:44:15 Config A/D  Result=40
06:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:44:15 Get A/D filter: -9.255963e+061  result=40
06:44:15 Get A/D value=-858993460  result=40
06:44:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:44:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:44:15 Parameters OK
06:44:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:44:15 Set A/D data flow result=40
06:44:15 Set A/D channel type result=40
06:44:15 Set A/D encoding result=40
06:44:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:44:15 Set channel filter=0.000000e+000  result=40
06:44:15 Config A/D  Result=40
06:44:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:44:15 Get A/D filter: -9.255963e+061  result=40
06:44:15 Get A/D value=-858993460  result=40
06:44:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:44:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:44:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:44:15 Aux=
06:44:15 Message to Camera, serial 185056 queued
06:44:51 Received message from Master: op=PointingHead serial=185068
06:44:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:44:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:44:51 Point started: ret=0
06:44:51 point_skyscan result=0
06:44:52 Check angles
06:44:52 SkyScan query
06:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:44:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:44:52 Message to Master queued w/err=0: serial=185068 error=0
06:44:57 Received message from Master: op=Filter serial=185069
06:44:57 Color wheel filter change from 0 to 0
06:44:57 FLIGetFilterPos err=0  currentPosition=0
06:44:57 FLIGetStepsRemaining err=0  RemainingSteps=0
06:44:57 Filter is already there-color wheel unchanged
06:44:57 Received message from Master: op=Shutter serial=185070
06:44:57 Shutter LASER close
06:44:57 Received message from Camera: op=State serial=185072
06:44:57 GetSingleValue result=40  Value=cccccccc
06:44:57 SkyScan query
06:44:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:44:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:44:58 Parameters OK
06:44:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:44:58 Set A/D data flow result=40
06:44:58 Set A/D channel type result=40
06:44:58 Set A/D encoding result=40
06:44:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:44:58 Set channel filter=0.000000e+000  result=40
06:44:58 Config A/D  Result=40
06:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:44:58 Get A/D filter: -9.255963e+061  result=40
06:44:58 Get A/D value=-858993460  result=40
06:44:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:44:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:44:58 Parameters OK
06:44:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:44:58 Set A/D data flow result=40
06:44:58 Set A/D channel type result=40
06:44:58 Set A/D encoding result=40
06:44:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:44:58 Set channel filter=0.000000e+000  result=40
06:44:58 Config A/D  Result=40
06:44:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:44:58 Get A/D filter: -9.255963e+061  result=40
06:44:58 Get A/D value=-858993460  result=40
06:44:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:44:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:44:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:44:58 Aux=
06:44:58 Message to Camera, serial 185072 queued
06:45:34 Received message from Master: op=PointingHead serial=185084
06:45:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:45:34 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:45:34 Point started: ret=0
06:45:34 point_skyscan result=0
06:45:35 Check angles
06:45:35 SkyScan query
06:45:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.19<-13546  Statuses=0008 0009
06:45:36 Msec=0  True Az=112.995  Ze=-23.19  Az status=0008  Ze status=0009
06:45:36 Check angles
06:45:36 SkyScan query
06:45:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.145<-14943  Statuses=0008 0009
06:45:36 Msec=750  True Az=112.995  Ze=-44.145  Az status=0008  Ze status=0009
06:45:36 Check angles
06:45:36 SkyScan query
06:45:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.115<-16341  Statuses=0008 0009
06:45:37 Msec=1500  True Az=112.995  Ze=-65.115  Az status=0008  Ze status=0009
06:45:37 Check angles
06:45:37 SkyScan query
06:45:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.07<-17738  Statuses=0008 0009
06:45:38 Msec=2250  True Az=112.995  Ze=-86.07  Az status=0008  Ze status=0009
06:45:38 Check angles
06:45:38 SkyScan query
06:45:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.01<-19134  Statuses=0008 0009
06:45:39 Msec=3000  True Az=112.995  Ze=-107.01  Az status=0008  Ze status=0009
06:45:39 Check angles
06:45:39 SkyScan query
06:45:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.98<-20532  Statuses=0008 0009
06:45:39 Msec=3750  True Az=112.995  Ze=-127.98  Az status=0008  Ze status=0009
06:45:39 Check angles
06:45:39 SkyScan query
06:45:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.935<-21929  Statuses=0008 0009
06:45:40 Msec=4500  True Az=112.995  Ze=-148.935  Az status=0008  Ze status=0009
06:45:40 Check angles
06:45:40 SkyScan query
06:45:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.875<-23325  Statuses=0008 0009
06:45:41 Msec=5250  True Az=112.995  Ze=-169.875  Az status=0008  Ze status=0009
06:45:41 Check angles
06:45:41 SkyScan query
06:45:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:45:42 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:45:42 Message to Master queued w/err=0: serial=185084 error=0
06:45:47 Received message from Master: op=Filter serial=185085
06:45:47 Color wheel filter change from 0 to 0
06:45:47 FLIGetFilterPos err=0  currentPosition=0
06:45:47 FLIGetStepsRemaining err=0  RemainingSteps=0
06:45:47 Filter is already there-color wheel unchanged
06:45:47 Received message from Master: op=Shutter serial=185086
06:45:47 Shutter LASER open
06:45:47 Received message from Camera: op=State serial=185088
06:45:47 GetSingleValue result=40  Value=cccccccc
06:45:47 SkyScan query
06:45:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:45:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:45:47 Parameters OK
06:45:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:45:47 Set A/D data flow result=40
06:45:47 Set A/D channel type result=40
06:45:47 Set A/D encoding result=40
06:45:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:45:47 Set channel filter=0.000000e+000  result=40
06:45:47 Config A/D  Result=40
06:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:45:47 Get A/D filter: -9.255963e+061  result=40
06:45:47 Get A/D value=-858993460  result=40
06:45:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:45:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:45:47 Parameters OK
06:45:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:45:47 Set A/D data flow result=40
06:45:47 Set A/D channel type result=40
06:45:47 Set A/D encoding result=40
06:45:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:45:47 Set channel filter=0.000000e+000  result=40
06:45:47 Config A/D  Result=40
06:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:45:47 Get A/D filter: -9.255963e+061  result=40
06:45:47 Get A/D value=-858993460  result=40
06:45:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:45:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:45:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:45:47 Aux=
06:45:47 Message to Camera, serial 185088 queued
06:45:56 Received message from Master: op=Shutter serial=185098
06:45:56 Shutter LASER close
06:45:57 Received message from Master: op=PointingHead serial=185102
06:45:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:45:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:45:57 Point started: ret=0
06:45:57 point_skyscan result=0
06:45:58 Check angles
06:45:58 SkyScan query
06:45:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
06:45:58 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
06:45:58 Check angles
06:45:58 SkyScan query
06:45:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
06:45:59 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
06:45:59 Check angles
06:45:59 SkyScan query
06:46:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.295<-18753  Statuses=0008 0009
06:46:00 Msec=1500  True Az=112.995  Ze=-101.295  Az status=0008  Ze status=0009
06:46:00 Check angles
06:46:00 SkyScan query
06:46:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.325<-17355  Statuses=0008 0009
06:46:00 Msec=2250  True Az=112.995  Ze=-80.325  Az status=0008  Ze status=0009
06:46:01 Check angles
06:46:01 SkyScan query
06:46:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.385<-15959  Statuses=0008 0009
06:46:01 Msec=3000  True Az=112.995  Ze=-59.385  Az status=0008  Ze status=0009
06:46:01 Check angles
06:46:01 SkyScan query
06:46:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.4<-14560  Statuses=0008 0009
06:46:02 Msec=3750  True Az=112.995  Ze=-38.4  Az status=0008  Ze status=0009
06:46:02 Check angles
06:46:02 SkyScan query
06:46:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.475<-13165  Statuses=0008 0009
06:46:03 Msec=4500  True Az=112.995  Ze=-17.475  Az status=0008  Ze status=0009
06:46:03 Check angles
06:46:03 SkyScan query
06:46:03 SkyScan query done: ret=0  az=112.995<-7533  ze=3.495<-11767  Statuses=0008 0009
06:46:03 Msec=5250  True Az=112.995  Ze=3.495  Az status=0008  Ze status=0009
06:46:04 Check angles
06:46:04 SkyScan query
06:46:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:46:04 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:46:04 Message to Master queued w/err=0: serial=185102 error=0
06:46:09 Received message from Master: op=Filter serial=185103
06:46:09 Color wheel filter change from 0 to 0
06:46:09 FLIGetFilterPos err=0  currentPosition=0
06:46:09 FLIGetStepsRemaining err=0  RemainingSteps=0
06:46:09 Filter is already there-color wheel unchanged
06:46:09 Received message from Master: op=Shutter serial=185104
06:46:09 Shutter LASER close
06:46:10 Received message from Camera: op=State serial=185106
06:46:10 GetSingleValue result=40  Value=cccccccc
06:46:10 SkyScan query
06:46:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:46:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:10 Parameters OK
06:46:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:10 Set A/D data flow result=40
06:46:10 Set A/D channel type result=40
06:46:10 Set A/D encoding result=40
06:46:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:10 Set channel filter=0.000000e+000  result=40
06:46:10 Config A/D  Result=40
06:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:10 Get A/D filter: -9.255963e+061  result=40
06:46:10 Get A/D value=-858993460  result=40
06:46:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:10 Parameters OK
06:46:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:10 Set A/D data flow result=40
06:46:10 Set A/D channel type result=40
06:46:10 Set A/D encoding result=40
06:46:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:10 Set channel filter=0.000000e+000  result=40
06:46:10 Config A/D  Result=40
06:46:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:10 Get A/D filter: -9.255963e+061  result=40
06:46:10 Get A/D value=-858993460  result=40
06:46:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:46:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:46:10 Aux=
06:46:10 Message to Camera, serial 185106 queued
06:46:47 Received message from Master: op=PointingHead serial=185119
06:46:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:46:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:46:47 Point started: ret=0
06:46:47 point_skyscan result=0
06:46:48 Check angles
06:46:48 SkyScan query
06:46:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:46:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:46:49 Message to Master queued w/err=0: serial=185119 error=0
06:46:54 Received message from Master: op=Filter serial=185120
06:46:54 Color wheel filter change from 0 to 0
06:46:54 FLIGetFilterPos err=0  currentPosition=0
06:46:54 FLIGetStepsRemaining err=0  RemainingSteps=0
06:46:54 Filter is already there-color wheel unchanged
06:46:54 Received message from Master: op=Shutter serial=185121
06:46:54 Shutter LASER close
06:46:54 Received message from Camera: op=State serial=185123
06:46:54 GetSingleValue result=40  Value=cccccccc
06:46:54 SkyScan query
06:46:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:46:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:54 Parameters OK
06:46:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:54 Set A/D data flow result=40
06:46:54 Set A/D channel type result=40
06:46:54 Set A/D encoding result=40
06:46:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:54 Set channel filter=0.000000e+000  result=40
06:46:54 Config A/D  Result=40
06:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:54 Get A/D filter: -9.255963e+061  result=40
06:46:54 Get A/D value=-858993460  result=40
06:46:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:46:54 Parameters OK
06:46:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:46:54 Set A/D data flow result=40
06:46:54 Set A/D channel type result=40
06:46:54 Set A/D encoding result=40
06:46:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:46:54 Set channel filter=0.000000e+000  result=40
06:46:54 Config A/D  Result=40
06:46:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:46:54 Get A/D filter: -9.255963e+061  result=40
06:46:54 Get A/D value=-858993460  result=40
06:46:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:46:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:46:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:46:54 Aux=
06:46:54 Message to Camera, serial 185123 queued
06:47:31 Received message from Master: op=PointingHead serial=185136
06:47:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:47:31 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:47:32 Point started: ret=0
06:47:32 point_skyscan result=0
06:47:32 Check angles
06:47:32 SkyScan query
06:47:33 SkyScan query done: ret=0  az=135.99<-9066  ze=-6.51<-12434  Statuses=0009 0008
06:47:33 Msec=0  True Az=135.99  Ze=-6.51  Az status=0009  Ze status=0008
06:47:33 Check angles
06:47:33 SkyScan query
06:47:34 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
06:47:34 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
06:47:34 Check angles
06:47:34 SkyScan query
06:47:34 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.495<-12433  Statuses=0009 0008
06:47:34 Msec=1500  True Az=171.315  Ze=-6.495  Az status=0009  Ze status=0008
06:47:35 Check angles
06:47:35 SkyScan query
06:47:35 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:47:35 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:47:35 Message to Master queued w/err=0: serial=185136 error=0
06:47:40 Received message from Master: op=Filter serial=185137
06:47:40 Color wheel filter change from 0 to 0
06:47:40 FLIGetFilterPos err=0  currentPosition=0
06:47:40 FLIGetStepsRemaining err=0  RemainingSteps=0
06:47:40 Filter is already there-color wheel unchanged
06:47:40 Received message from Master: op=Shutter serial=185138
06:47:40 Shutter LASER close
06:47:40 Received message from Camera: op=State serial=185140
06:47:40 GetSingleValue result=40  Value=cccccccc
06:47:40 SkyScan query
06:47:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:47:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:47:41 Parameters OK
06:47:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:47:41 Set A/D data flow result=40
06:47:41 Set A/D channel type result=40
06:47:41 Set A/D encoding result=40
06:47:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:47:41 Set channel filter=0.000000e+000  result=40
06:47:41 Config A/D  Result=40
06:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:47:41 Get A/D filter: -9.255963e+061  result=40
06:47:41 Get A/D value=-858993460  result=40
06:47:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:47:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:47:41 Parameters OK
06:47:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:47:41 Set A/D data flow result=40
06:47:41 Set A/D channel type result=40
06:47:41 Set A/D encoding result=40
06:47:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:47:41 Set channel filter=0.000000e+000  result=40
06:47:41 Config A/D  Result=40
06:47:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:47:41 Get A/D filter: -9.255963e+061  result=40
06:47:41 Get A/D value=-858993460  result=40
06:47:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:47:41 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:47:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:47:41 Aux=
06:47:41 Message to Camera, serial 185140 queued
06:48:18 Received message from Master: op=PointingHead serial=185153
06:48:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:48:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:48:18 Point started: ret=0
06:48:18 point_skyscan result=0
06:48:19 Check angles
06:48:19 SkyScan query
06:48:19 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
06:48:19 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
06:48:20 Check angles
06:48:20 SkyScan query
06:48:20 SkyScan query done: ret=0  az=135.69<-9046  ze=6.495<-11567  Statuses=0009 0008
06:48:20 Msec=750  True Az=135.69  Ze=6.495  Az status=0009  Ze status=0008
06:48:20 Check angles
06:48:20 SkyScan query
06:48:21 SkyScan query done: ret=0  az=118.26<-7884  ze=6.495<-11567  Statuses=0009 0008
06:48:21 Msec=1500  True Az=118.26  Ze=6.495  Az status=0009  Ze status=0008
06:48:21 Check angles
06:48:21 SkyScan query
06:48:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:48:22 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:48:22 Message to Master queued w/err=0: serial=185153 error=0
06:48:27 Received message from Master: op=Filter serial=185154
06:48:27 Color wheel filter change from 0 to 0
06:48:27 FLIGetFilterPos err=0  currentPosition=0
06:48:27 FLIGetStepsRemaining err=0  RemainingSteps=0
06:48:27 Filter is already there-color wheel unchanged
06:48:27 Received message from Master: op=Shutter serial=185155
06:48:27 Shutter LASER close
06:48:27 Received message from Camera: op=State serial=185157
06:48:27 GetSingleValue result=40  Value=cccccccc
06:48:27 SkyScan query
06:48:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:48:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:48:27 Parameters OK
06:48:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:48:27 Set A/D data flow result=40
06:48:27 Set A/D channel type result=40
06:48:27 Set A/D encoding result=40
06:48:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:48:27 Set channel filter=0.000000e+000  result=40
06:48:27 Config A/D  Result=40
06:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:48:27 Get A/D filter: -9.255963e+061  result=40
06:48:27 Get A/D value=-858993460  result=40
06:48:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:48:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:48:27 Parameters OK
06:48:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:48:27 Set A/D data flow result=40
06:48:27 Set A/D channel type result=40
06:48:27 Set A/D encoding result=40
06:48:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:48:27 Set channel filter=0.000000e+000  result=40
06:48:27 Config A/D  Result=40
06:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:48:27 Get A/D filter: -9.255963e+061  result=40
06:48:27 Get A/D value=-858993460  result=40
06:48:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:48:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:48:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:48:27 Aux=
06:48:27 Message to Camera, serial 185157 queued
06:49:04 Received message from Master: op=PointingHead serial=185170
06:49:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:49:04 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:49:05 Point started: ret=0
06:49:05 point_skyscan result=0
06:49:05 Check angles
06:49:05 SkyScan query
06:49:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.895<-13593  Statuses=0008 0009
06:49:06 Msec=0  True Az=112.995  Ze=-23.895  Az status=0008  Ze status=0009
06:49:06 Check angles
06:49:06 SkyScan query
06:49:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.82<-14988  Statuses=0008 0009
06:49:07 Msec=750  True Az=112.995  Ze=-44.82  Az status=0008  Ze status=0009
06:49:07 Check angles
06:49:07 SkyScan query
06:49:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.21<-16414  Statuses=0008 0009
06:49:07 Msec=1500  True Az=112.995  Ze=-66.21  Az status=0008  Ze status=0009
06:49:08 Check angles
06:49:08 SkyScan query
06:49:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.165<-17811  Statuses=0008 0009
06:49:08 Msec=2250  True Az=112.995  Ze=-87.165  Az status=0008  Ze status=0009
06:49:08 Check angles
06:49:08 SkyScan query
06:49:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.135<-19209  Statuses=0008 0009
06:49:09 Msec=3000  True Az=112.995  Ze=-108.135  Az status=0008  Ze status=0009
06:49:09 Check angles
06:49:09 SkyScan query
06:49:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.495<-20633  Statuses=0008 0009
06:49:10 Msec=3750  True Az=112.995  Ze=-129.495  Az status=0008  Ze status=0009
06:49:10 Check angles
06:49:10 SkyScan query
06:49:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.45<-22030  Statuses=0008 0009
06:49:10 Msec=4500  True Az=112.995  Ze=-150.45  Az status=0008  Ze status=0009
06:49:11 Check angles
06:49:11 SkyScan query
06:49:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.21<-23414  Statuses=0008 0009
06:49:11 Msec=5250  True Az=112.995  Ze=-171.21  Az status=0008  Ze status=0009
06:49:11 Check angles
06:49:11 SkyScan query
06:49:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:49:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:49:12 Message to Master queued w/err=0: serial=185170 error=0
06:49:17 Received message from Master: op=Filter serial=185171
06:49:17 Color wheel filter change from 0 to 0
06:49:17 FLIGetFilterPos err=0  currentPosition=0
06:49:17 FLIGetStepsRemaining err=0  RemainingSteps=0
06:49:17 Filter is already there-color wheel unchanged
06:49:17 Received message from Master: op=Shutter serial=185172
06:49:17 Shutter LASER open
06:49:17 Received message from Camera: op=State serial=185174
06:49:17 GetSingleValue result=40  Value=cccccccc
06:49:17 SkyScan query
06:49:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:49:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:49:18 Parameters OK
06:49:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:49:18 Set A/D data flow result=40
06:49:18 Set A/D channel type result=40
06:49:18 Set A/D encoding result=40
06:49:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:49:18 Set channel filter=0.000000e+000  result=40
06:49:18 Config A/D  Result=40
06:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:49:18 Get A/D filter: -9.255963e+061  result=40
06:49:18 Get A/D value=-858993460  result=40
06:49:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:49:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:49:18 Parameters OK
06:49:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:49:18 Set A/D data flow result=40
06:49:18 Set A/D channel type result=40
06:49:18 Set A/D encoding result=40
06:49:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:49:18 Set channel filter=0.000000e+000  result=40
06:49:18 Config A/D  Result=40
06:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:49:18 Get A/D filter: -9.255963e+061  result=40
06:49:18 Get A/D value=-858993460  result=40
06:49:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:49:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:49:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:49:18 Aux=
06:49:18 Message to Camera, serial 185174 queued
06:49:26 Received message from Master: op=Shutter serial=185184
06:49:26 Shutter LASER close
06:49:27 Received message from Master: op=PointingHead serial=185188
06:49:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:49:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:49:27 Point started: ret=0
06:49:27 point_skyscan result=0
06:49:28 Check angles
06:49:28 SkyScan query
06:49:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
06:49:29 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
06:49:29 Check angles
06:49:29 SkyScan query
06:49:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.295<-20153  Statuses=0008 0009
06:49:29 Msec=750  True Az=112.995  Ze=-122.295  Az status=0008  Ze status=0009
06:49:29 Check angles
06:49:29 SkyScan query
06:49:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.34<-18756  Statuses=0008 0009
06:49:30 Msec=1500  True Az=112.995  Ze=-101.34  Az status=0008  Ze status=0009
06:49:30 Check angles
06:49:30 SkyScan query
06:49:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.385<-17359  Statuses=0008 0009
06:49:31 Msec=2250  True Az=112.995  Ze=-80.385  Az status=0008  Ze status=0009
06:49:31 Check angles
06:49:31 SkyScan query
06:49:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.43<-15962  Statuses=0008 0009
06:49:32 Msec=3000  True Az=112.995  Ze=-59.43  Az status=0008  Ze status=0009
06:49:32 Check angles
06:49:32 SkyScan query
06:49:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.46<-14564  Statuses=0008 0009
06:49:32 Msec=3750  True Az=112.995  Ze=-38.46  Az status=0008  Ze status=0009
06:49:32 Check angles
06:49:32 SkyScan query
06:49:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.52<-13168  Statuses=0008 0009
06:49:33 Msec=4500  True Az=112.995  Ze=-17.52  Az status=0008  Ze status=0009
06:49:33 Check angles
06:49:33 SkyScan query
06:49:34 SkyScan query done: ret=0  az=112.995<-7533  ze=3.45<-11770  Statuses=0008 0009
06:49:34 Msec=5250  True Az=112.995  Ze=3.45  Az status=0008  Ze status=0009
06:49:34 Check angles
06:49:34 SkyScan query
06:49:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:49:35 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:49:35 Message to Master queued w/err=0: serial=185188 error=0
06:49:40 Received message from Master: op=Filter serial=185189
06:49:40 Color wheel filter change from 0 to 0
06:49:40 FLIGetFilterPos err=0  currentPosition=0
06:49:40 FLIGetStepsRemaining err=0  RemainingSteps=0
06:49:40 Filter is already there-color wheel unchanged
06:49:40 Received message from Master: op=Shutter serial=185190
06:49:40 Shutter LASER close
06:49:40 Received message from Camera: op=State serial=185192
06:49:40 GetSingleValue result=40  Value=cccccccc
06:49:40 SkyScan query
06:49:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:49:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:49:40 Parameters OK
06:49:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:49:40 Set A/D data flow result=40
06:49:40 Set A/D channel type result=40
06:49:40 Set A/D encoding result=40
06:49:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:49:40 Set channel filter=0.000000e+000  result=40
06:49:40 Config A/D  Result=40
06:49:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:49:40 Get A/D filter: -9.255963e+061  result=40
06:49:40 Get A/D value=-858993460  result=40
06:49:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:49:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:49:40 Parameters OK
06:49:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:49:40 Set A/D data flow result=40
06:49:40 Set A/D channel type result=40
06:49:40 Set A/D encoding result=40
06:49:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:49:40 Set channel filter=0.000000e+000  result=40
06:49:40 Config A/D  Result=40
06:49:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:49:40 Get A/D filter: -9.255963e+061  result=40
06:49:40 Get A/D value=-858993460  result=40
06:49:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:49:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:49:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:49:40 Aux=
06:49:40 Message to Camera, serial 185192 queued
06:50:17 Received message from Master: op=PointingHead serial=185205
06:50:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:50:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:50:18 Point started: ret=0
06:50:18 point_skyscan result=0
06:50:18 Check angles
06:50:18 SkyScan query
06:50:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:50:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:50:19 Message to Master queued w/err=0: serial=185205 error=0
06:50:24 Received message from Master: op=Filter serial=185206
06:50:24 Color wheel filter change from 0 to 0
06:50:24 FLIGetFilterPos err=0  currentPosition=0
06:50:24 FLIGetStepsRemaining err=0  RemainingSteps=0
06:50:24 Filter is already there-color wheel unchanged
06:50:24 Received message from Master: op=Shutter serial=185207
06:50:24 Shutter LASER close
06:50:24 Received message from Camera: op=State serial=185209
06:50:24 GetSingleValue result=40  Value=cccccccc
06:50:24 SkyScan query
06:50:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:50:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:50:25 Parameters OK
06:50:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:50:25 Set A/D data flow result=40
06:50:25 Set A/D channel type result=40
06:50:25 Set A/D encoding result=40
06:50:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:50:25 Set channel filter=0.000000e+000  result=40
06:50:25 Config A/D  Result=40
06:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:50:25 Get A/D filter: -9.255963e+061  result=40
06:50:25 Get A/D value=-858993460  result=40
06:50:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:50:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:50:25 Parameters OK
06:50:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:50:25 Set A/D data flow result=40
06:50:25 Set A/D channel type result=40
06:50:25 Set A/D encoding result=40
06:50:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:50:25 Set channel filter=0.000000e+000  result=40
06:50:25 Config A/D  Result=40
06:50:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:50:25 Get A/D filter: -9.255963e+061  result=40
06:50:25 Get A/D value=-858993460  result=40
06:50:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:50:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:50:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:50:25 Aux=
06:50:25 Message to Camera, serial 185209 queued
06:51:02 Received message from Master: op=PointingHead serial=185222
06:51:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:51:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:51:02 Point started: ret=0
06:51:02 point_skyscan result=0
06:51:03 Check angles
06:51:03 SkyScan query
06:51:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:51:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:51:03 Message to Master queued w/err=0: serial=185222 error=0
06:51:08 Received message from Master: op=Filter serial=185223
06:51:08 Color wheel filter change from 0 to 0
06:51:08 FLIGetFilterPos err=0  currentPosition=0
06:51:08 FLIGetStepsRemaining err=0  RemainingSteps=0
06:51:08 Filter is already there-color wheel unchanged
06:51:08 Received message from Master: op=Shutter serial=185224
06:51:08 Shutter LASER close
06:51:08 Received message from Camera: op=State serial=185226
06:51:08 GetSingleValue result=40  Value=cccccccc
06:51:08 SkyScan query
06:51:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:51:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:51:09 Parameters OK
06:51:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:51:09 Set A/D data flow result=40
06:51:09 Set A/D channel type result=40
06:51:09 Set A/D encoding result=40
06:51:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:51:09 Set channel filter=0.000000e+000  result=40
06:51:09 Config A/D  Result=40
06:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:51:09 Get A/D filter: -9.255963e+061  result=40
06:51:09 Get A/D value=-858993460  result=40
06:51:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:51:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:51:09 Parameters OK
06:51:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:51:09 Set A/D data flow result=40
06:51:09 Set A/D channel type result=40
06:51:09 Set A/D encoding result=40
06:51:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:51:09 Set channel filter=0.000000e+000  result=40
06:51:09 Config A/D  Result=40
06:51:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:51:09 Get A/D filter: -9.255963e+061  result=40
06:51:09 Get A/D value=-858993460  result=40
06:51:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:51:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:51:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:51:09 Aux=
06:51:09 Message to Camera, serial 185226 queued
06:51:46 Received message from Master: op=PointingHead serial=185239
06:51:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:51:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:51:46 Point started: ret=0
06:51:46 point_skyscan result=0
06:51:47 Check angles
06:51:47 SkyScan query
06:51:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:51:48 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:51:48 Message to Master queued w/err=0: serial=185239 error=0
06:51:53 Received message from Master: op=Filter serial=185240
06:51:53 Color wheel filter change from 0 to 0
06:51:53 FLIGetFilterPos err=0  currentPosition=0
06:51:53 FLIGetStepsRemaining err=0  RemainingSteps=0
06:51:53 Filter is already there-color wheel unchanged
06:51:53 Received message from Master: op=Shutter serial=185241
06:51:53 Shutter LASER close
06:51:53 Received message from Camera: op=State serial=185243
06:51:53 GetSingleValue result=40  Value=cccccccc
06:51:53 SkyScan query
06:51:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:51:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:51:53 Parameters OK
06:51:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:51:53 Set A/D data flow result=40
06:51:53 Set A/D channel type result=40
06:51:53 Set A/D encoding result=40
06:51:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:51:53 Set channel filter=0.000000e+000  result=40
06:51:53 Config A/D  Result=40
06:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:51:53 Get A/D filter: -9.255963e+061  result=40
06:51:53 Get A/D value=-858993460  result=40
06:51:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:51:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:51:53 Parameters OK
06:51:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:51:53 Set A/D data flow result=40
06:51:53 Set A/D channel type result=40
06:51:53 Set A/D encoding result=40
06:51:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:51:53 Set channel filter=0.000000e+000  result=40
06:51:53 Config A/D  Result=40
06:51:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:51:53 Get A/D filter: -9.255963e+061  result=40
06:51:53 Get A/D value=-858993460  result=40
06:51:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:51:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:51:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:51:53 Aux=
06:51:53 Message to Camera, serial 185243 queued
06:52:30 Received message from Master: op=PointingHead serial=185256
06:52:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:52:30 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:52:31 Point started: ret=0
06:52:31 point_skyscan result=0
06:52:31 Check angles
06:52:31 SkyScan query
06:52:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.865<-13591  Statuses=0008 0009
06:52:32 Msec=0  True Az=112.995  Ze=-23.865  Az status=0008  Ze status=0009
06:52:32 Check angles
06:52:32 SkyScan query
06:52:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.255<-15017  Statuses=0008 0009
06:52:33 Msec=750  True Az=112.995  Ze=-45.255  Az status=0008  Ze status=0009
06:52:33 Check angles
06:52:33 SkyScan query
06:52:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.63<-16442  Statuses=0008 0009
06:52:33 Msec=1500  True Az=112.995  Ze=-66.63  Az status=0008  Ze status=0009
06:52:34 Check angles
06:52:34 SkyScan query
06:52:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.585<-17839  Statuses=0008 0009
06:52:34 Msec=2250  True Az=112.995  Ze=-87.585  Az status=0008  Ze status=0009
06:52:34 Check angles
06:52:34 SkyScan query
06:52:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.525<-19235  Statuses=0008 0009
06:52:35 Msec=3000  True Az=112.995  Ze=-108.525  Az status=0008  Ze status=0009
06:52:35 Check angles
06:52:35 SkyScan query
06:52:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.48<-20632  Statuses=0008 0009
06:52:36 Msec=3750  True Az=112.995  Ze=-129.48  Az status=0008  Ze status=0009
06:52:36 Check angles
06:52:36 SkyScan query
06:52:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.435<-22029  Statuses=0008 0009
06:52:36 Msec=4500  True Az=112.995  Ze=-150.435  Az status=0008  Ze status=0009
06:52:37 Check angles
06:52:37 SkyScan query
06:52:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.525<-23435  Statuses=0008 0009
06:52:37 Msec=5250  True Az=112.995  Ze=-171.525  Az status=0008  Ze status=0009
06:52:37 Check angles
06:52:37 SkyScan query
06:52:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:52:38 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:52:38 Message to Master queued w/err=0: serial=185256 error=0
06:52:43 Received message from Master: op=Filter serial=185257
06:52:43 Color wheel filter change from 0 to 0
06:52:43 FLIGetFilterPos err=0  currentPosition=0
06:52:43 FLIGetStepsRemaining err=0  RemainingSteps=0
06:52:43 Filter is already there-color wheel unchanged
06:52:43 Received message from Master: op=Shutter serial=185258
06:52:43 Shutter LASER open
06:52:43 Received message from Camera: op=State serial=185260
06:52:43 GetSingleValue result=40  Value=cccccccc
06:52:43 SkyScan query
06:52:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:52:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:52:44 Parameters OK
06:52:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:52:44 Set A/D data flow result=40
06:52:44 Set A/D channel type result=40
06:52:44 Set A/D encoding result=40
06:52:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:52:44 Set channel filter=0.000000e+000  result=40
06:52:44 Config A/D  Result=40
06:52:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:52:44 Get A/D filter: -9.255963e+061  result=40
06:52:44 Get A/D value=-858993460  result=40
06:52:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:52:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:52:44 Parameters OK
06:52:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:52:44 Set A/D data flow result=40
06:52:44 Set A/D channel type result=40
06:52:44 Set A/D encoding result=40
06:52:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:52:44 Set channel filter=0.000000e+000  result=40
06:52:44 Config A/D  Result=40
06:52:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:52:44 Get A/D filter: -9.255963e+061  result=40
06:52:44 Get A/D value=-858993460  result=40
06:52:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:52:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:52:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:52:44 Aux=
06:52:44 Message to Camera, serial 185260 queued
06:52:52 Received message from Master: op=Shutter serial=185270
06:52:52 Shutter LASER close
06:52:53 Received message from Master: op=PointingHead serial=185274
06:52:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:52:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:52:53 Point started: ret=0
06:52:53 point_skyscan result=0
06:52:54 Check angles
06:52:54 SkyScan query
06:52:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
06:52:54 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
06:52:55 Check angles
06:52:55 SkyScan query
06:52:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.695<-20113  Statuses=0008 0009
06:52:55 Msec=750  True Az=112.995  Ze=-121.695  Az status=0008  Ze status=0009
06:52:55 Check angles
06:52:55 SkyScan query
06:52:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
06:52:56 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
06:52:56 Check angles
06:52:56 SkyScan query
06:52:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.8<-17320  Statuses=0008 0009
06:52:57 Msec=2250  True Az=112.995  Ze=-79.8  Az status=0008  Ze status=0009
06:52:57 Check angles
06:52:57 SkyScan query
06:52:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
06:52:58 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
06:52:58 Check angles
06:52:58 SkyScan query
06:52:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.875<-14525  Statuses=0008 0009
06:52:58 Msec=3750  True Az=112.995  Ze=-37.875  Az status=0008  Ze status=0009
06:52:58 Check angles
06:52:58 SkyScan query
06:52:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.485<-13099  Statuses=0008 0009
06:52:59 Msec=4500  True Az=112.995  Ze=-16.485  Az status=0008  Ze status=0009
06:52:59 Check angles
06:52:59 SkyScan query
06:53:00 SkyScan query done: ret=0  az=112.995<-7533  ze=4.395<-11707  Statuses=0008 0009
06:53:00 Msec=5250  True Az=112.995  Ze=4.395  Az status=0008  Ze status=0009
06:53:00 Check angles
06:53:00 SkyScan query
06:53:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:53:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:53:01 Message to Master queued w/err=0: serial=185274 error=0
06:53:06 Received message from Master: op=Filter serial=185275
06:53:06 Color wheel filter change from 0 to 0
06:53:06 FLIGetFilterPos err=0  currentPosition=0
06:53:06 FLIGetStepsRemaining err=0  RemainingSteps=0
06:53:06 Filter is already there-color wheel unchanged
06:53:06 Received message from Master: op=Shutter serial=185276
06:53:06 Shutter LASER close
06:53:06 Received message from Camera: op=State serial=185278
06:53:06 GetSingleValue result=40  Value=cccccccc
06:53:06 SkyScan query
06:53:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:53:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:06 Parameters OK
06:53:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:06 Set A/D data flow result=40
06:53:06 Set A/D channel type result=40
06:53:06 Set A/D encoding result=40
06:53:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:06 Set channel filter=0.000000e+000  result=40
06:53:06 Config A/D  Result=40
06:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:06 Get A/D filter: -9.255963e+061  result=40
06:53:06 Get A/D value=-858993460  result=40
06:53:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:06 Parameters OK
06:53:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:06 Set A/D data flow result=40
06:53:06 Set A/D channel type result=40
06:53:06 Set A/D encoding result=40
06:53:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:06 Set channel filter=0.000000e+000  result=40
06:53:06 Config A/D  Result=40
06:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:06 Get A/D filter: -9.255963e+061  result=40
06:53:06 Get A/D value=-858993460  result=40
06:53:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:53:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:53:06 Aux=
06:53:06 Message to Camera, serial 185278 queued
06:53:43 Received message from Master: op=PointingHead serial=185291
06:53:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:53:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:53:44 Point started: ret=0
06:53:44 point_skyscan result=0
06:53:44 Check angles
06:53:44 SkyScan query
06:53:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:53:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:53:45 Message to Master queued w/err=0: serial=185291 error=0
06:53:50 Received message from Master: op=Filter serial=185292
06:53:50 Color wheel filter change from 0 to 0
06:53:50 FLIGetFilterPos err=0  currentPosition=0
06:53:50 FLIGetStepsRemaining err=0  RemainingSteps=0
06:53:50 Filter is already there-color wheel unchanged
06:53:50 Received message from Master: op=Shutter serial=185293
06:53:50 Shutter LASER close
06:53:50 Received message from Camera: op=State serial=185295
06:53:50 GetSingleValue result=40  Value=cccccccc
06:53:50 SkyScan query
06:53:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:53:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:51 Parameters OK
06:53:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:51 Set A/D data flow result=40
06:53:51 Set A/D channel type result=40
06:53:51 Set A/D encoding result=40
06:53:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:51 Set channel filter=0.000000e+000  result=40
06:53:51 Config A/D  Result=40
06:53:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:51 Get A/D filter: -9.255963e+061  result=40
06:53:51 Get A/D value=-858993460  result=40
06:53:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:53:51 Parameters OK
06:53:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:53:51 Set A/D data flow result=40
06:53:51 Set A/D channel type result=40
06:53:51 Set A/D encoding result=40
06:53:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:53:51 Set channel filter=0.000000e+000  result=40
06:53:51 Config A/D  Result=40
06:53:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:53:51 Get A/D filter: -9.255963e+061  result=40
06:53:51 Get A/D value=-858993460  result=40
06:53:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:53:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:53:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:53:51 Aux=
06:53:51 Message to Camera, serial 185295 queued
06:54:28 Received message from Master: op=PointingHead serial=185308
06:54:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
06:54:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
06:54:28 Point started: ret=0
06:54:28 point_skyscan result=0
06:54:29 Check angles
06:54:29 SkyScan query
06:54:29 SkyScan query done: ret=0  az=135.945<-9063  ze=-6.51<-12434  Statuses=0009 0008
06:54:29 Msec=0  True Az=135.945  Ze=-6.51  Az status=0009  Ze status=0008
06:54:29 Check angles
06:54:29 SkyScan query
06:54:30 SkyScan query done: ret=0  az=153.465<-10231  ze=-6.495<-12433  Statuses=0009 0008
[UTC 2019-3-9  06:54:30]
06:54:30 Msec=750  True Az=153.465  Ze=-6.495  Az status=0009  Ze status=0008
06:54:30 Check angles
06:54:30 SkyScan query
06:54:31 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
06:54:31 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
06:54:31 Check angles
06:54:31 SkyScan query
06:54:32 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:54:32 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
06:54:32 Message to Master queued w/err=0: serial=185308 error=0
06:54:37 Received message from Master: op=Filter serial=185309
06:54:37 Color wheel filter change from 0 to 0
06:54:37 FLIGetFilterPos err=0  currentPosition=0
06:54:37 FLIGetStepsRemaining err=0  RemainingSteps=0
06:54:37 Filter is already there-color wheel unchanged
06:54:37 Received message from Master: op=Shutter serial=185310
06:54:37 Shutter LASER close
06:54:37 Received message from Camera: op=State serial=185312
06:54:37 GetSingleValue result=40  Value=cccccccc
06:54:37 SkyScan query
06:54:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
06:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:54:37 Parameters OK
06:54:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:54:37 Set A/D data flow result=40
06:54:37 Set A/D channel type result=40
06:54:37 Set A/D encoding result=40
06:54:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:54:37 Set channel filter=0.000000e+000  result=40
06:54:37 Config A/D  Result=40
06:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:54:37 Get A/D filter: -9.255963e+061  result=40
06:54:37 Get A/D value=-858993460  result=40
06:54:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:54:37 Parameters OK
06:54:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:54:37 Set A/D data flow result=40
06:54:37 Set A/D channel type result=40
06:54:37 Set A/D encoding result=40
06:54:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:54:37 Set channel filter=0.000000e+000  result=40
06:54:37 Config A/D  Result=40
06:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:54:37 Get A/D filter: -9.255963e+061  result=40
06:54:37 Get A/D value=-858993460  result=40
06:54:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:54:37 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:54:37 Aux=
06:54:37 Message to Camera, serial 185312 queued
06:55:14 Received message from Master: op=PointingHead serial=185325
06:55:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:55:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:55:15 Point started: ret=0
06:55:15 point_skyscan result=0
06:55:15 Check angles
06:55:15 SkyScan query
06:55:16 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
06:55:16 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
06:55:16 Check angles
06:55:16 SkyScan query
06:55:17 SkyScan query done: ret=0  az=135.48<-9032  ze=6.495<-11567  Statuses=0009 0008
06:55:17 Msec=750  True Az=135.48  Ze=6.495  Az status=0009  Ze status=0008
06:55:17 Check angles
06:55:17 SkyScan query
06:55:17 SkyScan query done: ret=0  az=118.02<-7868  ze=6.495<-11567  Statuses=0009 0008
06:55:17 Msec=1500  True Az=118.02  Ze=6.495  Az status=0009  Ze status=0008
06:55:18 Check angles
06:55:18 SkyScan query
06:55:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:55:18 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:55:18 Message to Master queued w/err=0: serial=185325 error=0
06:55:23 Received message from Master: op=Filter serial=185326
06:55:23 Color wheel filter change from 0 to 0
06:55:23 FLIGetFilterPos err=0  currentPosition=0
06:55:23 FLIGetStepsRemaining err=0  RemainingSteps=0
06:55:23 Filter is already there-color wheel unchanged
06:55:23 Received message from Master: op=Shutter serial=185327
06:55:23 Shutter LASER close
06:55:23 Received message from Camera: op=State serial=185329
06:55:23 GetSingleValue result=40  Value=cccccccc
06:55:23 SkyScan query
06:55:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:55:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:55:24 Parameters OK
06:55:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:55:24 Set A/D data flow result=40
06:55:24 Set A/D channel type result=40
06:55:24 Set A/D encoding result=40
06:55:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:55:24 Set channel filter=0.000000e+000  result=40
06:55:24 Config A/D  Result=40
06:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:55:24 Get A/D filter: -9.255963e+061  result=40
06:55:24 Get A/D value=-858993460  result=40
06:55:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:55:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:55:24 Parameters OK
06:55:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:55:24 Set A/D data flow result=40
06:55:24 Set A/D channel type result=40
06:55:24 Set A/D encoding result=40
06:55:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:55:24 Set channel filter=0.000000e+000  result=40
06:55:24 Config A/D  Result=40
06:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:55:24 Get A/D filter: -9.255963e+061  result=40
06:55:24 Get A/D value=-858993460  result=40
06:55:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:55:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:55:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:55:24 Aux=
06:55:24 Message to Camera, serial 185329 queued
06:56:01 Received message from Master: op=PointingHead serial=185342
06:56:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:56:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:56:01 Point started: ret=0
06:56:01 point_skyscan result=0
06:56:02 Check angles
06:56:02 SkyScan query
06:56:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.025<-13535  Statuses=0008 0009
06:56:02 Msec=0  True Az=112.995  Ze=-23.025  Az status=0008  Ze status=0009
06:56:03 Check angles
06:56:03 SkyScan query
06:56:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
06:56:03 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
06:56:03 Check angles
06:56:03 SkyScan query
06:56:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.4<-16360  Statuses=0008 0009
06:56:04 Msec=1500  True Az=112.995  Ze=-65.4  Az status=0008  Ze status=0009
06:56:04 Check angles
06:56:04 SkyScan query
06:56:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.355<-17757  Statuses=0008 0009
06:56:05 Msec=2250  True Az=112.995  Ze=-86.355  Az status=0008  Ze status=0009
06:56:05 Check angles
06:56:05 SkyScan query
06:56:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.295<-19153  Statuses=0008 0009
06:56:05 Msec=3000  True Az=112.995  Ze=-107.295  Az status=0008  Ze status=0009
06:56:06 Check angles
06:56:06 SkyScan query
06:56:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.235<-20549  Statuses=0008 0009
06:56:06 Msec=3750  True Az=112.995  Ze=-128.235  Az status=0008  Ze status=0009
06:56:06 Check angles
06:56:06 SkyScan query
06:56:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.205<-21947  Statuses=0008 0009
06:56:07 Msec=4500  True Az=112.995  Ze=-149.205  Az status=0008  Ze status=0009
06:56:07 Check angles
06:56:07 SkyScan query
06:56:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.145<-23343  Statuses=0008 0009
06:56:08 Msec=5250  True Az=112.995  Ze=-170.145  Az status=0008  Ze status=0009
06:56:08 Check angles
06:56:08 SkyScan query
06:56:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:56:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:56:08 Message to Master queued w/err=0: serial=185342 error=0
06:56:13 Received message from Master: op=Filter serial=185343
06:56:13 Color wheel filter change from 0 to 0
06:56:13 FLIGetFilterPos err=0  currentPosition=0
06:56:13 FLIGetStepsRemaining err=0  RemainingSteps=0
06:56:13 Filter is already there-color wheel unchanged
06:56:14 Received message from Master: op=Shutter serial=185344
06:56:14 Shutter LASER open
06:56:14 Received message from Camera: op=State serial=185346
06:56:14 GetSingleValue result=40  Value=cccccccc
06:56:14 SkyScan query
06:56:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:56:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:56:14 Parameters OK
06:56:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:56:14 Set A/D data flow result=40
06:56:14 Set A/D channel type result=40
06:56:14 Set A/D encoding result=40
06:56:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:56:14 Set channel filter=0.000000e+000  result=40
06:56:14 Config A/D  Result=40
06:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:56:14 Get A/D filter: -9.255963e+061  result=40
06:56:14 Get A/D value=-858993460  result=40
06:56:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:56:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:56:14 Parameters OK
06:56:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:56:14 Set A/D data flow result=40
06:56:14 Set A/D channel type result=40
06:56:14 Set A/D encoding result=40
06:56:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:56:14 Set channel filter=0.000000e+000  result=40
06:56:14 Config A/D  Result=40
06:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:56:14 Get A/D filter: -9.255963e+061  result=40
06:56:14 Get A/D value=-858993460  result=40
06:56:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:56:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:56:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:56:14 Aux=
06:56:14 Message to Camera, serial 185346 queued
06:56:23 Received message from Master: op=Shutter serial=185356
06:56:23 Shutter LASER close
06:56:23 Received message from Master: op=PointingHead serial=185360
06:56:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:56:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:56:24 Point started: ret=0
06:56:24 point_skyscan result=0
06:56:24 Check angles
06:56:24 SkyScan query
06:56:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
06:56:25 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
06:56:25 Check angles
06:56:25 SkyScan query
06:56:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.995<-20133  Statuses=0008 0009
06:56:26 Msec=750  True Az=112.995  Ze=-121.995  Az status=0008  Ze status=0009
06:56:26 Check angles
06:56:26 SkyScan query
06:56:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.07<-18738  Statuses=0008 0009
06:56:26 Msec=1500  True Az=112.995  Ze=-101.07  Az status=0008  Ze status=0009
06:56:27 Check angles
06:56:27 SkyScan query
06:56:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
06:56:27 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
06:56:27 Check angles
06:56:27 SkyScan query
06:56:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.725<-15915  Statuses=0008 0009
06:56:28 Msec=3000  True Az=112.995  Ze=-58.725  Az status=0008  Ze status=0009
06:56:28 Check angles
06:56:28 SkyScan query
06:56:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.755<-14517  Statuses=0008 0009
06:56:29 Msec=3750  True Az=112.995  Ze=-37.755  Az status=0008  Ze status=0009
06:56:29 Check angles
06:56:29 SkyScan query
06:56:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.35<-13090  Statuses=0008 0009
06:56:29 Msec=4500  True Az=112.995  Ze=-16.35  Az status=0008  Ze status=0009
06:56:30 Check angles
06:56:30 SkyScan query
06:56:30 SkyScan query done: ret=0  az=112.995<-7533  ze=4.485<-11701  Statuses=0008 0009
06:56:30 Msec=5250  True Az=112.995  Ze=4.485  Az status=0008  Ze status=0009
06:56:30 Check angles
06:56:30 SkyScan query
06:56:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:56:31 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:56:31 Message to Master queued w/err=0: serial=185360 error=0
06:56:36 Received message from Master: op=Filter serial=185361
06:56:36 Color wheel filter change from 0 to 0
06:56:36 FLIGetFilterPos err=0  currentPosition=0
06:56:36 FLIGetStepsRemaining err=0  RemainingSteps=0
06:56:36 Filter is already there-color wheel unchanged
06:56:36 Received message from Master: op=Shutter serial=185362
06:56:36 Shutter LASER close
06:56:36 Received message from Camera: op=State serial=185364
06:56:36 GetSingleValue result=40  Value=cccccccc
06:56:36 SkyScan query
06:56:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:56:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:56:37 Parameters OK
06:56:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:56:37 Set A/D data flow result=40
06:56:37 Set A/D channel type result=40
06:56:37 Set A/D encoding result=40
06:56:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:56:37 Set channel filter=0.000000e+000  result=40
06:56:37 Config A/D  Result=40
06:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:56:37 Get A/D filter: -9.255963e+061  result=40
06:56:37 Get A/D value=-858993460  result=40
06:56:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:56:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:56:37 Parameters OK
06:56:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:56:37 Set A/D data flow result=40
06:56:37 Set A/D channel type result=40
06:56:37 Set A/D encoding result=40
06:56:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:56:37 Set channel filter=0.000000e+000  result=40
06:56:37 Config A/D  Result=40
06:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:56:37 Get A/D filter: -9.255963e+061  result=40
06:56:37 Get A/D value=-858993460  result=40
06:56:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:56:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:56:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:56:37 Aux=
06:56:37 Message to Camera, serial 185364 queued
06:57:14 Received message from Master: op=PointingHead serial=185377
06:57:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:57:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:57:14 Point started: ret=0
06:57:14 point_skyscan result=0
06:57:15 Check angles
06:57:15 SkyScan query
06:57:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:57:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:57:15 Message to Master queued w/err=0: serial=185377 error=0
06:57:20 Received message from Master: op=Filter serial=185378
06:57:20 Color wheel filter change from 0 to 0
06:57:20 FLIGetFilterPos err=0  currentPosition=0
06:57:20 FLIGetStepsRemaining err=0  RemainingSteps=0
06:57:20 Filter is already there-color wheel unchanged
06:57:21 Received message from Master: op=Shutter serial=185379
06:57:21 Shutter LASER close
06:57:21 Received message from Camera: op=State serial=185381
06:57:21 GetSingleValue result=40  Value=cccccccc
06:57:21 SkyScan query
06:57:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:57:21 Parameters OK
06:57:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:57:21 Set A/D data flow result=40
06:57:21 Set A/D channel type result=40
06:57:21 Set A/D encoding result=40
06:57:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:57:21 Set channel filter=0.000000e+000  result=40
06:57:21 Config A/D  Result=40
06:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:57:21 Get A/D filter: -9.255963e+061  result=40
06:57:21 Get A/D value=-858993460  result=40
06:57:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:57:21 Parameters OK
06:57:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:57:21 Set A/D data flow result=40
06:57:21 Set A/D channel type result=40
06:57:21 Set A/D encoding result=40
06:57:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:57:21 Set channel filter=0.000000e+000  result=40
06:57:21 Config A/D  Result=40
06:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:57:21 Get A/D filter: -9.255963e+061  result=40
06:57:21 Get A/D value=-858993460  result=40
06:57:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:57:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:57:21 Aux=
06:57:21 Message to Camera, serial 185381 queued
06:57:58 Received message from Master: op=PointingHead serial=185394
06:57:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:57:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:57:58 Point started: ret=0
06:57:58 point_skyscan result=0
06:57:59 Check angles
06:57:59 SkyScan query
06:58:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:58:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:58:00 Message to Master queued w/err=0: serial=185394 error=0
06:58:05 Received message from Master: op=Filter serial=185395
06:58:05 Color wheel filter change from 0 to 0
06:58:05 FLIGetFilterPos err=0  currentPosition=0
06:58:05 FLIGetStepsRemaining err=0  RemainingSteps=0
06:58:05 Filter is already there-color wheel unchanged
06:58:05 Received message from Master: op=Shutter serial=185396
06:58:05 Shutter LASER close
06:58:05 Received message from Camera: op=State serial=185398
06:58:05 GetSingleValue result=40  Value=cccccccc
06:58:05 SkyScan query
06:58:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:58:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:58:05 Parameters OK
06:58:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:58:05 Set A/D data flow result=40
06:58:05 Set A/D channel type result=40
06:58:05 Set A/D encoding result=40
06:58:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:58:05 Set channel filter=0.000000e+000  result=40
06:58:05 Config A/D  Result=40
06:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:58:05 Get A/D filter: -9.255963e+061  result=40
06:58:05 Get A/D value=-858993460  result=40
06:58:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:58:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:58:05 Parameters OK
06:58:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:58:05 Set A/D data flow result=40
06:58:05 Set A/D channel type result=40
06:58:05 Set A/D encoding result=40
06:58:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:58:05 Set channel filter=0.000000e+000  result=40
06:58:05 Config A/D  Result=40
06:58:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:58:05 Get A/D filter: -9.255963e+061  result=40
06:58:05 Get A/D value=-858993460  result=40
06:58:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:58:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:58:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:58:05 Aux=
06:58:05 Message to Camera, serial 185398 queued
06:58:42 Received message from Master: op=PointingHead serial=185411
06:58:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:58:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:58:43 Point started: ret=0
06:58:43 point_skyscan result=0
06:58:43 Check angles
06:58:43 SkyScan query
06:58:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:58:44 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
06:58:44 Message to Master queued w/err=0: serial=185411 error=0
06:58:49 Received message from Master: op=Filter serial=185412
06:58:49 Color wheel filter change from 0 to 0
06:58:49 FLIGetFilterPos err=0  currentPosition=0
06:58:49 FLIGetStepsRemaining err=0  RemainingSteps=0
06:58:49 Filter is already there-color wheel unchanged
06:58:49 Received message from Master: op=Shutter serial=185413
06:58:49 Shutter LASER close
06:58:49 Received message from Camera: op=State serial=185415
06:58:49 GetSingleValue result=40  Value=cccccccc
06:58:49 SkyScan query
06:58:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
06:58:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:58:50 Parameters OK
06:58:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:58:50 Set A/D data flow result=40
06:58:50 Set A/D channel type result=40
06:58:50 Set A/D encoding result=40
06:58:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:58:50 Set channel filter=0.000000e+000  result=40
06:58:50 Config A/D  Result=40
06:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:58:50 Get A/D filter: -9.255963e+061  result=40
06:58:50 Get A/D value=-858993460  result=40
06:58:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:58:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:58:50 Parameters OK
06:58:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:58:50 Set A/D data flow result=40
06:58:50 Set A/D channel type result=40
06:58:50 Set A/D encoding result=40
06:58:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:58:50 Set channel filter=0.000000e+000  result=40
06:58:50 Config A/D  Result=40
06:58:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:58:50 Get A/D filter: -9.255963e+061  result=40
06:58:50 Get A/D value=-858993460  result=40
06:58:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:58:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:58:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:58:50 Aux=
06:58:50 Message to Camera, serial 185415 queued
06:59:27 Received message from Master: op=PointingHead serial=185428
06:59:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
06:59:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
06:59:27 Point started: ret=0
06:59:27 point_skyscan result=0
06:59:28 Check angles
06:59:28 SkyScan query
06:59:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.595<-13573  Statuses=0008 0009
06:59:28 Msec=0  True Az=112.995  Ze=-23.595  Az status=0008  Ze status=0009
06:59:29 Check angles
06:59:29 SkyScan query
06:59:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-45<-15000  Statuses=0008 0009
06:59:29 Msec=750  True Az=112.995  Ze=-45  Az status=0008  Ze status=0009
06:59:29 Check angles
06:59:29 SkyScan query
06:59:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.94<-16396  Statuses=0008 0009
06:59:30 Msec=1500  True Az=112.995  Ze=-65.94  Az status=0008  Ze status=0009
06:59:30 Check angles
06:59:30 SkyScan query
06:59:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.895<-17793  Statuses=0008 0009
06:59:31 Msec=2250  True Az=112.995  Ze=-86.895  Az status=0008  Ze status=0009
06:59:31 Check angles
06:59:31 SkyScan query
06:59:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.85<-19190  Statuses=0008 0009
06:59:31 Msec=3000  True Az=112.995  Ze=-107.85  Az status=0008  Ze status=0009
06:59:32 Check angles
06:59:32 SkyScan query
06:59:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.79<-20586  Statuses=0008 0009
06:59:32 Msec=3750  True Az=112.995  Ze=-128.79  Az status=0008  Ze status=0009
06:59:32 Check angles
06:59:32 SkyScan query
06:59:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.195<-22013  Statuses=0008 0009
06:59:33 Msec=4500  True Az=112.995  Ze=-150.195  Az status=0008  Ze status=0009
06:59:33 Check angles
06:59:33 SkyScan query
06:59:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.015<-23401  Statuses=0008 0009
06:59:34 Msec=5250  True Az=112.995  Ze=-171.015  Az status=0008  Ze status=0009
06:59:34 Check angles
06:59:34 SkyScan query
06:59:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
06:59:34 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
06:59:34 Message to Master queued w/err=0: serial=185428 error=0
06:59:39 Received message from Master: op=Filter serial=185429
06:59:39 Color wheel filter change from 0 to 0
06:59:39 FLIGetFilterPos err=0  currentPosition=0
06:59:39 FLIGetStepsRemaining err=0  RemainingSteps=0
06:59:39 Filter is already there-color wheel unchanged
06:59:40 Received message from Master: op=Shutter serial=185430
06:59:40 Shutter LASER open
06:59:40 Received message from Camera: op=State serial=185432
06:59:40 GetSingleValue result=40  Value=cccccccc
06:59:40 SkyScan query
06:59:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
06:59:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:59:40 Parameters OK
06:59:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:59:40 Set A/D data flow result=40
06:59:40 Set A/D channel type result=40
06:59:40 Set A/D encoding result=40
06:59:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:59:40 Set channel filter=0.000000e+000  result=40
06:59:40 Config A/D  Result=40
06:59:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:59:40 Get A/D filter: -9.255963e+061  result=40
06:59:40 Get A/D value=-858993460  result=40
06:59:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:59:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
06:59:40 Parameters OK
06:59:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
06:59:40 Set A/D data flow result=40
06:59:40 Set A/D channel type result=40
06:59:40 Set A/D encoding result=40
06:59:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
06:59:40 Set channel filter=0.000000e+000  result=40
06:59:40 Config A/D  Result=40
06:59:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
06:59:40 Get A/D filter: -9.255963e+061  result=40
06:59:40 Get A/D value=-858993460  result=40
06:59:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
06:59:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
06:59:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
06:59:40 Aux=
06:59:40 Message to Camera, serial 185432 queued
06:59:49 Received message from Master: op=Shutter serial=185442
06:59:49 Shutter LASER close
06:59:49 Received message from Master: op=PointingHead serial=185446
06:59:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
06:59:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
06:59:50 Point started: ret=0
06:59:50 point_skyscan result=0
06:59:50 Check angles
06:59:50 SkyScan query
06:59:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
06:59:51 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
06:59:51 Check angles
06:59:51 SkyScan query
06:59:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
06:59:52 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
06:59:52 Check angles
06:59:52 SkyScan query
06:59:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.28<-18752  Statuses=0008 0009
06:59:52 Msec=1500  True Az=112.995  Ze=-101.28  Az status=0008  Ze status=0009
06:59:53 Check angles
06:59:53 SkyScan query
06:59:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
06:59:53 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
06:59:53 Check angles
06:59:53 SkyScan query
06:59:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
06:59:54 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
06:59:54 Check angles
06:59:54 SkyScan query
06:59:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.965<-14531  Statuses=0008 0009
06:59:55 Msec=3750  True Az=112.995  Ze=-37.965  Az status=0008  Ze status=0009
06:59:55 Check angles
06:59:55 SkyScan query
06:59:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.01<-13134  Statuses=0008 0009
06:59:55 Msec=4500  True Az=112.995  Ze=-17.01  Az status=0008  Ze status=0009
06:59:56 Check angles
06:59:56 SkyScan query
06:59:56 SkyScan query done: ret=0  az=112.995<-7533  ze=3.93<-11738  Statuses=0008 0009
06:59:56 Msec=5250  True Az=112.995  Ze=3.93  Az status=0008  Ze status=0009
06:59:56 Check angles
06:59:56 SkyScan query
06:59:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
06:59:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
06:59:57 Message to Master queued w/err=0: serial=185446 error=0
07:00:02 Received message from Master: op=Filter serial=185447
07:00:02 Color wheel filter change from 0 to 0
07:00:02 FLIGetFilterPos err=0  currentPosition=0
07:00:02 FLIGetStepsRemaining err=0  RemainingSteps=0
07:00:02 Filter is already there-color wheel unchanged
07:00:02 Received message from Master: op=Shutter serial=185448
07:00:02 Shutter LASER close
07:00:02 Received message from Camera: op=State serial=185450
07:00:02 GetSingleValue result=40  Value=cccccccc
07:00:02 SkyScan query
07:00:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:00:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:03 Parameters OK
07:00:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:03 Set A/D data flow result=40
07:00:03 Set A/D channel type result=40
07:00:03 Set A/D encoding result=40
07:00:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:03 Set channel filter=0.000000e+000  result=40
07:00:03 Config A/D  Result=40
07:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:03 Get A/D filter: -9.255963e+061  result=40
07:00:03 Get A/D value=-858993460  result=40
07:00:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:03 Parameters OK
07:00:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:03 Set A/D data flow result=40
07:00:03 Set A/D channel type result=40
07:00:03 Set A/D encoding result=40
07:00:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:03 Set channel filter=0.000000e+000  result=40
07:00:03 Config A/D  Result=40
07:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:03 Get A/D filter: -9.255963e+061  result=40
07:00:03 Get A/D value=-858993460  result=40
07:00:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:00:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:00:03 Aux=
07:00:03 Message to Camera, serial 185450 queued
07:00:40 Received message from Master: op=PointingHead serial=185463
07:00:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:00:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:00:40 Point started: ret=0
07:00:40 point_skyscan result=0
07:00:41 Check angles
07:00:41 SkyScan query
07:00:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:00:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:00:41 Message to Master queued w/err=0: serial=185463 error=0
07:00:46 Received message from Master: op=Filter serial=185464
07:00:46 Color wheel filter change from 0 to 0
07:00:46 FLIGetFilterPos err=0  currentPosition=0
07:00:46 FLIGetStepsRemaining err=0  RemainingSteps=0
07:00:46 Filter is already there-color wheel unchanged
07:00:47 Received message from Master: op=Shutter serial=185465
07:00:47 Shutter LASER close
07:00:47 Received message from Camera: op=State serial=185467
07:00:47 GetSingleValue result=40  Value=cccccccc
07:00:47 SkyScan query
07:00:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:00:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:47 Parameters OK
07:00:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:47 Set A/D data flow result=40
07:00:47 Set A/D channel type result=40
07:00:47 Set A/D encoding result=40
07:00:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:47 Set channel filter=0.000000e+000  result=40
07:00:47 Config A/D  Result=40
07:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:47 Get A/D filter: -9.255963e+061  result=40
07:00:47 Get A/D value=-858993460  result=40
07:00:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:00:47 Parameters OK
07:00:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:00:47 Set A/D data flow result=40
07:00:47 Set A/D channel type result=40
07:00:47 Set A/D encoding result=40
07:00:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:00:47 Set channel filter=0.000000e+000  result=40
07:00:47 Config A/D  Result=40
07:00:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:00:47 Get A/D filter: -9.255963e+061  result=40
07:00:47 Get A/D value=-858993460  result=40
07:00:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:00:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:00:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:00:47 Aux=
07:00:47 Message to Camera, serial 185467 queued
07:01:24 Received message from Master: op=PointingHead serial=185480
07:01:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:01:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:01:24 Point started: ret=0
07:01:24 point_skyscan result=0
07:01:25 Check angles
07:01:25 SkyScan query
07:01:26 SkyScan query done: ret=0  az=136.365<-9091  ze=-6.51<-12434  Statuses=0009 0008
07:01:26 Msec=0  True Az=136.365  Ze=-6.51  Az status=0009  Ze status=0008
07:01:26 Check angles
07:01:26 SkyScan query
07:01:27 SkyScan query done: ret=0  az=154.155<-10277  ze=-6.495<-12433  Statuses=0009 0008
07:01:27 Msec=750  True Az=154.155  Ze=-6.495  Az status=0009  Ze status=0008
07:01:27 Check angles
07:01:27 SkyScan query
07:01:27 SkyScan query done: ret=0  az=171.615<-11441  ze=-6.495<-12433  Statuses=0009 0008
07:01:27 Msec=1500  True Az=171.615  Ze=-6.495  Az status=0009  Ze status=0008
07:01:27 Check angles
07:01:27 SkyScan query
07:01:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:01:28 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:01:28 Message to Master queued w/err=0: serial=185480 error=0
07:01:33 Received message from Master: op=Filter serial=185481
07:01:33 Color wheel filter change from 0 to 0
07:01:33 FLIGetFilterPos err=0  currentPosition=0
07:01:33 FLIGetStepsRemaining err=0  RemainingSteps=0
07:01:33 Filter is already there-color wheel unchanged
07:01:33 Received message from Master: op=Shutter serial=185482
07:01:33 Shutter LASER close
07:01:33 Received message from Camera: op=State serial=185484
07:01:33 GetSingleValue result=40  Value=cccccccc
07:01:33 SkyScan query
07:01:34 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:01:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:01:34 Parameters OK
07:01:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:01:34 Set A/D data flow result=40
07:01:34 Set A/D channel type result=40
07:01:34 Set A/D encoding result=40
07:01:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:01:34 Set channel filter=0.000000e+000  result=40
07:01:34 Config A/D  Result=40
07:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:01:34 Get A/D filter: -9.255963e+061  result=40
07:01:34 Get A/D value=-858993460  result=40
07:01:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:01:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:01:34 Parameters OK
07:01:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:01:34 Set A/D data flow result=40
07:01:34 Set A/D channel type result=40
07:01:34 Set A/D encoding result=40
07:01:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:01:34 Set channel filter=0.000000e+000  result=40
07:01:34 Config A/D  Result=40
07:01:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:01:34 Get A/D filter: -9.255963e+061  result=40
07:01:34 Get A/D value=-858993460  result=40
07:01:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:01:34 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:01:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:01:34 Aux=
07:01:34 Message to Camera, serial 185484 queued
07:02:11 Received message from Master: op=PointingHead serial=185497
07:02:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:02:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:02:11 Point started: ret=0
07:02:11 point_skyscan result=0
07:02:12 Check angles
07:02:12 SkyScan query
07:02:12 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
07:02:12 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
07:02:13 Check angles
07:02:13 SkyScan query
07:02:13 SkyScan query done: ret=0  az=135.315<-9021  ze=6.495<-11567  Statuses=0009 0008
07:02:13 Msec=750  True Az=135.315  Ze=6.495  Az status=0009  Ze status=0008
07:02:13 Check angles
07:02:13 SkyScan query
07:02:14 SkyScan query done: ret=0  az=117.795<-7853  ze=6.495<-11567  Statuses=0009 0008
07:02:14 Msec=1500  True Az=117.795  Ze=6.495  Az status=0009  Ze status=0008
07:02:14 Check angles
07:02:14 SkyScan query
07:02:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:02:15 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:02:15 Message to Master queued w/err=0: serial=185497 error=0
07:02:20 Received message from Master: op=Filter serial=185498
07:02:20 Color wheel filter change from 0 to 0
07:02:20 FLIGetFilterPos err=0  currentPosition=0
07:02:20 FLIGetStepsRemaining err=0  RemainingSteps=0
07:02:20 Filter is already there-color wheel unchanged
07:02:20 Received message from Master: op=Shutter serial=185499
07:02:20 Shutter LASER close
07:02:20 Received message from Camera: op=State serial=185501
07:02:20 GetSingleValue result=40  Value=cccccccc
07:02:20 SkyScan query
07:02:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:02:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:02:20 Parameters OK
07:02:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:02:20 Set A/D data flow result=40
07:02:20 Set A/D channel type result=40
07:02:20 Set A/D encoding result=40
07:02:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:02:20 Set channel filter=0.000000e+000  result=40
07:02:20 Config A/D  Result=40
07:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:02:20 Get A/D filter: -9.255963e+061  result=40
07:02:20 Get A/D value=-858993460  result=40
07:02:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:02:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:02:20 Parameters OK
07:02:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:02:20 Set A/D data flow result=40
07:02:20 Set A/D channel type result=40
07:02:20 Set A/D encoding result=40
07:02:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:02:20 Set channel filter=0.000000e+000  result=40
07:02:20 Config A/D  Result=40
07:02:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:02:20 Get A/D filter: -9.255963e+061  result=40
07:02:20 Get A/D value=-858993460  result=40
07:02:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:02:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:02:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:02:20 Aux=
07:02:20 Message to Camera, serial 185501 queued
07:02:57 Received message from Master: op=PointingHead serial=185514
07:02:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:02:57 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:02:58 Point started: ret=0
07:02:58 point_skyscan result=0
07:02:58 Check angles
07:02:58 SkyScan query
07:02:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
07:02:59 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
07:02:59 Check angles
07:02:59 SkyScan query
07:03:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.355<-14957  Statuses=0008 0009
07:03:00 Msec=750  True Az=112.995  Ze=-44.355  Az status=0008  Ze status=0009
07:03:00 Check angles
07:03:00 SkyScan query
07:03:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
07:03:00 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
07:03:01 Check angles
07:03:01 SkyScan query
07:03:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
07:03:01 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
07:03:01 Check angles
07:03:01 SkyScan query
07:03:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.19<-19146  Statuses=0008 0009
07:03:02 Msec=3000  True Az=112.995  Ze=-107.19  Az status=0008  Ze status=0009
07:03:02 Check angles
07:03:02 SkyScan query
07:03:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.145<-20543  Statuses=0008 0009
07:03:03 Msec=3750  True Az=112.995  Ze=-128.145  Az status=0008  Ze status=0009
07:03:03 Check angles
07:03:03 SkyScan query
07:03:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.535<-21969  Statuses=0008 0009
07:03:03 Msec=4500  True Az=112.995  Ze=-149.535  Az status=0008  Ze status=0009
07:03:04 Check angles
07:03:04 SkyScan query
07:03:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.475<-23365  Statuses=0008 0009
07:03:04 Msec=5250  True Az=112.995  Ze=-170.475  Az status=0008  Ze status=0009
07:03:04 Check angles
07:03:04 SkyScan query
07:03:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:03:05 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:03:05 Message to Master queued w/err=0: serial=185514 error=0
07:03:10 Received message from Master: op=Filter serial=185515
07:03:10 Color wheel filter change from 0 to 0
07:03:10 FLIGetFilterPos err=0  currentPosition=0
07:03:10 FLIGetStepsRemaining err=0  RemainingSteps=0
07:03:10 Filter is already there-color wheel unchanged
07:03:10 Received message from Master: op=Shutter serial=185516
07:03:10 Shutter LASER open
07:03:10 Received message from Camera: op=State serial=185518
07:03:10 GetSingleValue result=40  Value=cccccccc
07:03:10 SkyScan query
07:03:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:03:11 Parameters OK
07:03:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:03:11 Set A/D data flow result=40
07:03:11 Set A/D channel type result=40
07:03:11 Set A/D encoding result=40
07:03:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:03:11 Set channel filter=0.000000e+000  result=40
07:03:11 Config A/D  Result=40
07:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:03:11 Get A/D filter: -9.255963e+061  result=40
07:03:11 Get A/D value=-858993460  result=40
07:03:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:03:11 Parameters OK
07:03:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:03:11 Set A/D data flow result=40
07:03:11 Set A/D channel type result=40
07:03:11 Set A/D encoding result=40
07:03:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:03:11 Set channel filter=0.000000e+000  result=40
07:03:11 Config A/D  Result=40
07:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:03:11 Get A/D filter: -9.255963e+061  result=40
07:03:11 Get A/D value=-858993460  result=40
07:03:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:03:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:03:11 Aux=
07:03:11 Message to Camera, serial 185518 queued
07:03:18 Received message from Master: op=Shutter serial=185527
07:03:18 Shutter LASER close
07:03:19 Received message from Master: op=PointingHead serial=185531
07:03:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:03:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:03:19 Point started: ret=0
07:03:19 point_skyscan result=0
07:03:20 Check angles
07:03:20 SkyScan query
07:03:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
07:03:20 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
07:03:21 Check angles
07:03:21 SkyScan query
07:03:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
07:03:21 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
07:03:21 Check angles
07:03:21 SkyScan query
07:03:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
07:03:22 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
07:03:22 Check angles
07:03:22 SkyScan query
07:03:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.83<-17322  Statuses=0008 0009
07:03:23 Msec=2250  True Az=112.995  Ze=-79.83  Az status=0008  Ze status=0009
07:03:23 Check angles
07:03:23 SkyScan query
07:03:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.89<-15926  Statuses=0008 0009
07:03:23 Msec=3000  True Az=112.995  Ze=-58.89  Az status=0008  Ze status=0009
07:03:24 Check angles
07:03:24 SkyScan query
07:03:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.92<-14528  Statuses=0008 0009
07:03:24 Msec=3750  True Az=112.995  Ze=-37.92  Az status=0008  Ze status=0009
07:03:24 Check angles
07:03:24 SkyScan query
07:03:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.965<-13131  Statuses=0008 0009
07:03:25 Msec=4500  True Az=112.995  Ze=-16.965  Az status=0008  Ze status=0009
07:03:25 Check angles
07:03:25 SkyScan query
07:03:26 SkyScan query done: ret=0  az=112.995<-7533  ze=3.975<-11735  Statuses=0008 0009
07:03:26 Msec=5250  True Az=112.995  Ze=3.975  Az status=0008  Ze status=0009
07:03:26 Check angles
07:03:26 SkyScan query
07:03:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:03:26 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:03:26 Message to Master queued w/err=0: serial=185531 error=0
07:03:31 Received message from Master: op=Filter serial=185532
07:03:31 Color wheel filter change from 0 to 0
07:03:31 FLIGetFilterPos err=0  currentPosition=0
07:03:31 FLIGetStepsRemaining err=0  RemainingSteps=0
07:03:31 Filter is already there-color wheel unchanged
07:03:32 Received message from Master: op=Shutter serial=185533
07:03:32 Shutter LASER close
07:03:32 Received message from Camera: op=State serial=185535
07:03:32 GetSingleValue result=40  Value=cccccccc
07:03:32 SkyScan query
07:03:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:03:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:03:32 Parameters OK
07:03:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:03:32 Set A/D data flow result=40
07:03:32 Set A/D channel type result=40
07:03:32 Set A/D encoding result=40
07:03:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:03:32 Set channel filter=0.000000e+000  result=40
07:03:32 Config A/D  Result=40
07:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:03:32 Get A/D filter: -9.255963e+061  result=40
07:03:32 Get A/D value=-858993460  result=40
07:03:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:03:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:03:32 Parameters OK
07:03:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:03:32 Set A/D data flow result=40
07:03:32 Set A/D channel type result=40
07:03:32 Set A/D encoding result=40
07:03:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:03:32 Set channel filter=0.000000e+000  result=40
07:03:32 Config A/D  Result=40
07:03:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:03:32 Get A/D filter: -9.255963e+061  result=40
07:03:32 Get A/D value=-858993460  result=40
07:03:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:03:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:03:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:03:32 Aux=
07:03:32 Message to Camera, serial 185535 queued
07:03:36 Received message from Master: op=Identify serial=185536
[UTC 2019-3-9  07:03:48]
07:04:09 Received message from Master: op=PointingHead serial=185551
07:04:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:04:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:04:10 Point started: ret=0
07:04:10 point_skyscan result=0
07:04:10 Check angles
07:04:10 SkyScan query
07:04:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:04:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:04:11 Message to Master queued w/err=0: serial=185551 error=0
07:04:16 Received message from Master: op=Filter serial=185552
07:04:16 Color wheel filter change from 0 to 0
07:04:16 FLIGetFilterPos err=0  currentPosition=0
07:04:16 FLIGetStepsRemaining err=0  RemainingSteps=0
07:04:16 Filter is already there-color wheel unchanged
07:04:16 Received message from Master: op=Shutter serial=185553
07:04:16 Shutter LASER close
07:04:16 Received message from Camera: op=State serial=185555
07:04:16 GetSingleValue result=40  Value=cccccccc
07:04:16 SkyScan query
07:04:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:04:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:04:17 Parameters OK
07:04:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:04:17 Set A/D data flow result=40
07:04:17 Set A/D channel type result=40
07:04:17 Set A/D encoding result=40
07:04:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:04:17 Set channel filter=0.000000e+000  result=40
07:04:17 Config A/D  Result=40
07:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:04:17 Get A/D filter: -9.255963e+061  result=40
07:04:17 Get A/D value=-858993460  result=40
07:04:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:04:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:04:17 Parameters OK
07:04:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:04:17 Set A/D data flow result=40
07:04:17 Set A/D channel type result=40
07:04:17 Set A/D encoding result=40
07:04:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:04:17 Set channel filter=0.000000e+000  result=40
07:04:17 Config A/D  Result=40
07:04:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:04:17 Get A/D filter: -9.255963e+061  result=40
07:04:17 Get A/D value=-858993460  result=40
07:04:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:04:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:04:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:04:17 Aux=
07:04:17 Message to Camera, serial 185555 queued
07:04:54 Received message from Master: op=PointingHead serial=185568
07:04:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:04:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:04:54 Point started: ret=0
07:04:54 point_skyscan result=0
07:04:55 Check angles
07:04:55 SkyScan query
07:04:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:04:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:04:55 Message to Master queued w/err=0: serial=185568 error=0
07:05:00 Received message from Master: op=Filter serial=185569
07:05:00 Color wheel filter change from 0 to 0
07:05:00 FLIGetFilterPos err=0  currentPosition=0
07:05:00 FLIGetStepsRemaining err=0  RemainingSteps=0
07:05:00 Filter is already there-color wheel unchanged
07:05:00 Received message from Master: op=Shutter serial=185570
07:05:00 Shutter LASER close
07:05:00 Received message from Camera: op=State serial=185572
07:05:00 GetSingleValue result=40  Value=cccccccc
07:05:00 SkyScan query
07:05:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:05:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:05:01 Parameters OK
07:05:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:05:01 Set A/D data flow result=40
07:05:01 Set A/D channel type result=40
07:05:01 Set A/D encoding result=40
07:05:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:05:01 Set channel filter=0.000000e+000  result=40
07:05:01 Config A/D  Result=40
07:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:05:01 Get A/D filter: -9.255963e+061  result=40
07:05:01 Get A/D value=-858993460  result=40
07:05:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:05:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:05:01 Parameters OK
07:05:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:05:01 Set A/D data flow result=40
07:05:01 Set A/D channel type result=40
07:05:01 Set A/D encoding result=40
07:05:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:05:01 Set channel filter=0.000000e+000  result=40
07:05:01 Config A/D  Result=40
07:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:05:01 Get A/D filter: -9.255963e+061  result=40
07:05:01 Get A/D value=-858993460  result=40
07:05:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:05:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:05:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:05:01 Aux=
07:05:01 Message to Camera, serial 185572 queued
07:05:38 Received message from Master: op=PointingHead serial=185585
07:05:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:05:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:05:38 Point started: ret=0
07:05:38 point_skyscan result=0
07:05:39 Check angles
07:05:39 SkyScan query
07:05:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:05:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:05:39 Message to Master queued w/err=0: serial=185585 error=0
07:05:44 Received message from Master: op=Filter serial=185586
07:05:44 Color wheel filter change from 0 to 0
07:05:44 FLIGetFilterPos err=0  currentPosition=0
07:05:44 FLIGetStepsRemaining err=0  RemainingSteps=0
07:05:44 Filter is already there-color wheel unchanged
07:05:45 Received message from Master: op=Shutter serial=185587
07:05:45 Shutter LASER close
07:05:45 Received message from Camera: op=State serial=185589
07:05:45 GetSingleValue result=40  Value=cccccccc
07:05:45 SkyScan query
07:05:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:05:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:05:45 Parameters OK
07:05:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:05:45 Set A/D data flow result=40
07:05:45 Set A/D channel type result=40
07:05:45 Set A/D encoding result=40
07:05:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:05:45 Set channel filter=0.000000e+000  result=40
07:05:45 Config A/D  Result=40
07:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:05:45 Get A/D filter: -9.255963e+061  result=40
07:05:45 Get A/D value=-858993460  result=40
07:05:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:05:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:05:45 Parameters OK
07:05:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:05:45 Set A/D data flow result=40
07:05:45 Set A/D channel type result=40
07:05:45 Set A/D encoding result=40
07:05:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:05:45 Set channel filter=0.000000e+000  result=40
07:05:45 Config A/D  Result=40
07:05:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:05:45 Get A/D filter: -9.255963e+061  result=40
07:05:45 Get A/D value=-858993460  result=40
07:05:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:05:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:05:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:05:45 Aux=
07:05:45 Message to Camera, serial 185589 queued
07:06:22 Received message from Master: op=PointingHead serial=185602
07:06:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:06:22 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:06:23 Point started: ret=0
07:06:23 point_skyscan result=0
07:06:23 Check angles
07:06:23 SkyScan query
07:06:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
07:06:24 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
07:06:24 Check angles
07:06:24 SkyScan query
07:06:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.955<-14997  Statuses=0008 0009
07:06:25 Msec=750  True Az=112.995  Ze=-44.955  Az status=0008  Ze status=0009
07:06:25 Check angles
07:06:25 SkyScan query
07:06:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.895<-16393  Statuses=0008 0009
07:06:25 Msec=1500  True Az=112.995  Ze=-65.895  Az status=0008  Ze status=0009
07:06:26 Check angles
07:06:26 SkyScan query
07:06:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
07:06:26 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
07:06:26 Check angles
07:06:26 SkyScan query
07:06:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.79<-19186  Statuses=0008 0009
07:06:27 Msec=3000  True Az=112.995  Ze=-107.79  Az status=0008  Ze status=0009
07:06:27 Check angles
07:06:27 SkyScan query
07:06:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.73<-20582  Statuses=0008 0009
07:06:28 Msec=3750  True Az=112.995  Ze=-128.73  Az status=0008  Ze status=0009
07:06:28 Check angles
07:06:28 SkyScan query
07:06:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.15<-22010  Statuses=0008 0009
07:06:28 Msec=4500  True Az=112.995  Ze=-150.15  Az status=0008  Ze status=0009
07:06:29 Check angles
07:06:29 SkyScan query
07:06:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.97<-23398  Statuses=0008 0009
07:06:29 Msec=5250  True Az=112.995  Ze=-170.97  Az status=0008  Ze status=0009
07:06:29 Check angles
07:06:29 SkyScan query
07:06:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:06:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:06:30 Message to Master queued w/err=0: serial=185602 error=0
07:06:35 Received message from Master: op=Filter serial=185603
07:06:35 Color wheel filter change from 0 to 0
07:06:35 FLIGetFilterPos err=0  currentPosition=0
07:06:35 FLIGetStepsRemaining err=0  RemainingSteps=0
07:06:35 Filter is already there-color wheel unchanged
07:06:35 Received message from Master: op=Shutter serial=185604
07:06:35 Shutter LASER open
07:06:35 Received message from Camera: op=State serial=185606
07:06:35 GetSingleValue result=40  Value=cccccccc
07:06:35 SkyScan query
07:06:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:06:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:06:36 Parameters OK
07:06:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:06:36 Set A/D data flow result=40
07:06:36 Set A/D channel type result=40
07:06:36 Set A/D encoding result=40
07:06:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:06:36 Set channel filter=0.000000e+000  result=40
07:06:36 Config A/D  Result=40
07:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:06:36 Get A/D filter: -9.255963e+061  result=40
07:06:36 Get A/D value=-858993460  result=40
07:06:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:06:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:06:36 Parameters OK
07:06:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:06:36 Set A/D data flow result=40
07:06:36 Set A/D channel type result=40
07:06:36 Set A/D encoding result=40
07:06:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:06:36 Set channel filter=0.000000e+000  result=40
07:06:36 Config A/D  Result=40
07:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:06:36 Get A/D filter: -9.255963e+061  result=40
07:06:36 Get A/D value=-858993460  result=40
07:06:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:06:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:06:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:06:36 Aux=
07:06:36 Message to Camera, serial 185606 queued
07:06:44 Received message from Master: op=Shutter serial=185616
07:06:44 Shutter LASER close
07:06:45 Received message from Master: op=PointingHead serial=185620
07:06:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:06:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:06:45 Point started: ret=0
07:06:45 point_skyscan result=0
07:06:46 Check angles
07:06:46 SkyScan query
07:06:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.725<-21515  Statuses=0008 0009
07:06:47 Msec=0  True Az=112.995  Ze=-142.725  Az status=0008  Ze status=0009
07:06:47 Check angles
07:06:47 SkyScan query
07:06:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.755<-20117  Statuses=0008 0009
07:06:47 Msec=750  True Az=112.995  Ze=-121.755  Az status=0008  Ze status=0009
07:06:47 Check angles
07:06:47 SkyScan query
07:06:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.8<-18720  Statuses=0008 0009
07:06:48 Msec=1500  True Az=112.995  Ze=-100.8  Az status=0008  Ze status=0009
07:06:48 Check angles
07:06:48 SkyScan query
07:06:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.89<-17326  Statuses=0008 0009
07:06:49 Msec=2250  True Az=112.995  Ze=-79.89  Az status=0008  Ze status=0009
07:06:49 Check angles
07:06:49 SkyScan query
07:06:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.47<-15898  Statuses=0008 0009
07:06:50 Msec=3000  True Az=112.995  Ze=-58.47  Az status=0008  Ze status=0009
07:06:50 Check angles
07:06:50 SkyScan query
07:06:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.53<-14502  Statuses=0008 0009
07:06:50 Msec=3750  True Az=112.995  Ze=-37.53  Az status=0008  Ze status=0009
07:06:50 Check angles
07:06:50 SkyScan query
07:06:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.545<-13103  Statuses=0008 0009
07:06:51 Msec=4500  True Az=112.995  Ze=-16.545  Az status=0008  Ze status=0009
07:06:51 Check angles
07:06:51 SkyScan query
07:06:52 SkyScan query done: ret=0  az=112.995<-7533  ze=4.335<-11711  Statuses=0008 0009
07:06:52 Msec=5250  True Az=112.995  Ze=4.335  Az status=0008  Ze status=0009
07:06:52 Check angles
07:06:52 SkyScan query
07:06:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:06:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:06:53 Message to Master queued w/err=0: serial=185620 error=0
07:06:58 Received message from Master: op=Filter serial=185621
07:06:58 Color wheel filter change from 0 to 0
07:06:58 FLIGetFilterPos err=0  currentPosition=0
07:06:58 FLIGetStepsRemaining err=0  RemainingSteps=0
07:06:58 Filter is already there-color wheel unchanged
07:06:58 Received message from Master: op=Shutter serial=185622
07:06:58 Shutter LASER close
07:06:58 Received message from Camera: op=State serial=185624
07:06:58 GetSingleValue result=40  Value=cccccccc
07:06:58 SkyScan query
07:06:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:06:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:06:58 Parameters OK
07:06:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:06:58 Set A/D data flow result=40
07:06:58 Set A/D channel type result=40
07:06:58 Set A/D encoding result=40
07:06:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:06:58 Set channel filter=0.000000e+000  result=40
07:06:58 Config A/D  Result=40
07:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:06:58 Get A/D filter: -9.255963e+061  result=40
07:06:58 Get A/D value=-858993460  result=40
07:06:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:06:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:06:58 Parameters OK
07:06:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:06:58 Set A/D data flow result=40
07:06:58 Set A/D channel type result=40
07:06:58 Set A/D encoding result=40
07:06:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:06:58 Set channel filter=0.000000e+000  result=40
07:06:58 Config A/D  Result=40
07:06:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:06:58 Get A/D filter: -9.255963e+061  result=40
07:06:58 Get A/D value=-858993460  result=40
07:06:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:06:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:06:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:06:58 Aux=
07:06:58 Message to Camera, serial 185624 queued
07:07:35 Received message from Master: op=PointingHead serial=185637
07:07:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:07:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:07:36 Point started: ret=0
07:07:36 point_skyscan result=0
07:07:36 Check angles
07:07:36 SkyScan query
07:07:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:07:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:07:37 Message to Master queued w/err=0: serial=185637 error=0
07:07:42 Received message from Master: op=Filter serial=185638
07:07:42 Color wheel filter change from 0 to 0
07:07:42 FLIGetFilterPos err=0  currentPosition=0
07:07:42 FLIGetStepsRemaining err=0  RemainingSteps=0
07:07:42 Filter is already there-color wheel unchanged
07:07:42 Received message from Master: op=Shutter serial=185639
07:07:42 Shutter LASER close
07:07:42 Received message from Camera: op=State serial=185641
07:07:42 GetSingleValue result=40  Value=cccccccc
07:07:42 SkyScan query
07:07:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:07:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:07:43 Parameters OK
07:07:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:07:43 Set A/D data flow result=40
07:07:43 Set A/D channel type result=40
07:07:43 Set A/D encoding result=40
07:07:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:07:43 Set channel filter=0.000000e+000  result=40
07:07:43 Config A/D  Result=40
07:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:07:43 Get A/D filter: -9.255963e+061  result=40
07:07:43 Get A/D value=-858993460  result=40
07:07:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:07:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:07:43 Parameters OK
07:07:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:07:43 Set A/D data flow result=40
07:07:43 Set A/D channel type result=40
07:07:43 Set A/D encoding result=40
07:07:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:07:43 Set channel filter=0.000000e+000  result=40
07:07:43 Config A/D  Result=40
07:07:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:07:43 Get A/D filter: -9.255963e+061  result=40
07:07:43 Get A/D value=-858993460  result=40
07:07:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:07:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:07:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:07:43 Aux=
07:07:43 Message to Camera, serial 185641 queued
07:08:20 Received message from Master: op=PointingHead serial=185654
07:08:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:08:20 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:08:20 Point started: ret=0
07:08:20 point_skyscan result=0
07:08:21 Check angles
07:08:21 SkyScan query
07:08:21 SkyScan query done: ret=0  az=135.93<-9062  ze=-6.51<-12434  Statuses=0009 0008
07:08:21 Msec=0  True Az=135.93  Ze=-6.51  Az status=0009  Ze status=0008
07:08:22 Check angles
07:08:22 SkyScan query
07:08:22 SkyScan query done: ret=0  az=153.78<-10252  ze=-6.495<-12433  Statuses=0009 0008
07:08:22 Msec=750  True Az=153.78  Ze=-6.495  Az status=0009  Ze status=0008
07:08:22 Check angles
07:08:22 SkyScan query
07:08:23 SkyScan query done: ret=0  az=171.615<-11441  ze=-6.495<-12433  Statuses=0009 0008
07:08:23 Msec=1500  True Az=171.615  Ze=-6.495  Az status=0009  Ze status=0008
07:08:23 Check angles
07:08:23 SkyScan query
07:08:24 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:08:24 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:08:24 Message to Master queued w/err=0: serial=185654 error=0
07:08:29 Received message from Master: op=Filter serial=185655
07:08:29 Color wheel filter change from 0 to 0
07:08:29 FLIGetFilterPos err=0  currentPosition=0
07:08:29 FLIGetStepsRemaining err=0  RemainingSteps=0
07:08:29 Filter is already there-color wheel unchanged
07:08:29 Received message from Master: op=Shutter serial=185656
07:08:29 Shutter LASER close
07:08:29 Received message from Camera: op=State serial=185658
07:08:29 GetSingleValue result=40  Value=cccccccc
07:08:29 SkyScan query
07:08:29 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:08:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:08:29 Parameters OK
07:08:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:08:29 Set A/D data flow result=40
07:08:29 Set A/D channel type result=40
07:08:29 Set A/D encoding result=40
07:08:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:08:29 Set channel filter=0.000000e+000  result=40
07:08:29 Config A/D  Result=40
07:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:08:29 Get A/D filter: -9.255963e+061  result=40
07:08:29 Get A/D value=-858993460  result=40
07:08:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:08:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:08:29 Parameters OK
07:08:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:08:29 Set A/D data flow result=40
07:08:29 Set A/D channel type result=40
07:08:29 Set A/D encoding result=40
07:08:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:08:29 Set channel filter=0.000000e+000  result=40
07:08:29 Config A/D  Result=40
07:08:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:08:29 Get A/D filter: -9.255963e+061  result=40
07:08:29 Get A/D value=-858993460  result=40
07:08:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:08:29 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:08:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:08:29 Aux=
07:08:29 Message to Camera, serial 185658 queued
07:09:06 Received message from Master: op=PointingHead serial=185671
07:09:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:09:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:09:07 Point started: ret=0
07:09:07 point_skyscan result=0
07:09:07 Check angles
07:09:07 SkyScan query
07:09:08 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
07:09:08 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
07:09:08 Check angles
07:09:08 SkyScan query
07:09:09 SkyScan query done: ret=0  az=135.09<-9006  ze=6.495<-11567  Statuses=0009 0008
07:09:09 Msec=750  True Az=135.09  Ze=6.495  Az status=0009  Ze status=0008
07:09:09 Check angles
07:09:09 SkyScan query
07:09:09 SkyScan query done: ret=0  az=117.675<-7845  ze=6.495<-11567  Statuses=0009 0008
07:09:09 Msec=1500  True Az=117.675  Ze=6.495  Az status=0009  Ze status=0008
07:09:10 Check angles
07:09:10 SkyScan query
07:09:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:09:10 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:09:10 Message to Master queued w/err=0: serial=185671 error=0
07:09:15 Received message from Master: op=Filter serial=185672
07:09:15 Color wheel filter change from 0 to 0
07:09:15 FLIGetFilterPos err=0  currentPosition=0
07:09:15 FLIGetStepsRemaining err=0  RemainingSteps=0
07:09:15 Filter is already there-color wheel unchanged
07:09:15 Received message from Master: op=Shutter serial=185673
07:09:15 Shutter LASER close
07:09:15 Received message from Camera: op=State serial=185675
07:09:15 GetSingleValue result=40  Value=cccccccc
07:09:15 SkyScan query
07:09:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:09:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:09:16 Parameters OK
07:09:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:09:16 Set A/D data flow result=40
07:09:16 Set A/D channel type result=40
07:09:16 Set A/D encoding result=40
07:09:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:09:16 Set channel filter=0.000000e+000  result=40
07:09:16 Config A/D  Result=40
07:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:09:16 Get A/D filter: -9.255963e+061  result=40
07:09:16 Get A/D value=-858993460  result=40
07:09:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:09:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:09:16 Parameters OK
07:09:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:09:16 Set A/D data flow result=40
07:09:16 Set A/D channel type result=40
07:09:16 Set A/D encoding result=40
07:09:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:09:16 Set channel filter=0.000000e+000  result=40
07:09:16 Config A/D  Result=40
07:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:09:16 Get A/D filter: -9.255963e+061  result=40
07:09:16 Get A/D value=-858993460  result=40
07:09:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:09:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:09:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:09:16 Aux=
07:09:16 Message to Camera, serial 185675 queued
07:09:53 Received message from Master: op=PointingHead serial=185688
07:09:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:09:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:09:53 Point started: ret=0
07:09:53 point_skyscan result=0
07:09:54 Check angles
07:09:54 SkyScan query
07:09:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
07:09:54 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
07:09:55 Check angles
07:09:55 SkyScan query
07:09:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
07:09:55 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
07:09:55 Check angles
07:09:55 SkyScan query
07:09:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.85<-16390  Statuses=0008 0009
07:09:56 Msec=1500  True Az=112.995  Ze=-65.85  Az status=0008  Ze status=0009
07:09:56 Check angles
07:09:56 SkyScan query
07:09:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
07:09:57 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
07:09:57 Check angles
07:09:57 SkyScan query
07:09:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.18<-19212  Statuses=0008 0009
07:09:57 Msec=3000  True Az=112.995  Ze=-108.18  Az status=0008  Ze status=0009
07:09:58 Check angles
07:09:58 SkyScan query
07:09:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.57<-20638  Statuses=0008 0009
07:09:58 Msec=3750  True Az=112.995  Ze=-129.57  Az status=0008  Ze status=0009
07:09:58 Check angles
07:09:58 SkyScan query
07:09:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.945<-22063  Statuses=0008 0009
07:09:59 Msec=4500  True Az=112.995  Ze=-150.945  Az status=0008  Ze status=0009
07:09:59 Check angles
07:09:59 SkyScan query
07:10:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.57<-23438  Statuses=0008 0009
07:10:00 Msec=5250  True Az=112.995  Ze=-171.57  Az status=0008  Ze status=0009
07:10:00 Check angles
07:10:00 SkyScan query
07:10:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:10:01 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:10:01 Message to Master queued w/err=0: serial=185688 error=0
07:10:06 Received message from Master: op=Filter serial=185689
07:10:06 Color wheel filter change from 0 to 0
07:10:06 FLIGetFilterPos err=0  currentPosition=0
07:10:06 FLIGetStepsRemaining err=0  RemainingSteps=0
07:10:06 Filter is already there-color wheel unchanged
07:10:06 Received message from Master: op=Shutter serial=185690
07:10:06 Shutter LASER open
07:10:06 Received message from Camera: op=State serial=185692
07:10:06 GetSingleValue result=40  Value=cccccccc
07:10:06 SkyScan query
07:10:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:10:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:06 Parameters OK
07:10:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:06 Set A/D data flow result=40
07:10:06 Set A/D channel type result=40
07:10:06 Set A/D encoding result=40
07:10:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:06 Set channel filter=0.000000e+000  result=40
07:10:06 Config A/D  Result=40
07:10:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:06 Get A/D filter: -9.255963e+061  result=40
07:10:06 Get A/D value=-858993460  result=40
07:10:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:06 Parameters OK
07:10:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:06 Set A/D data flow result=40
07:10:06 Set A/D channel type result=40
07:10:06 Set A/D encoding result=40
07:10:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:06 Set channel filter=0.000000e+000  result=40
07:10:06 Config A/D  Result=40
07:10:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:06 Get A/D filter: -9.255963e+061  result=40
07:10:06 Get A/D value=-858993460  result=40
07:10:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:10:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:10:06 Aux=
07:10:06 Message to Camera, serial 185692 queued
07:10:15 Received message from Master: op=Shutter serial=185702
07:10:15 Shutter LASER close
07:10:15 Received message from Master: op=PointingHead serial=185706
07:10:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:10:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:10:16 Point started: ret=0
07:10:16 point_skyscan result=0
07:10:16 Check angles
07:10:16 SkyScan query
07:10:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.83<-21522  Statuses=0008 0009
07:10:17 Msec=0  True Az=112.995  Ze=-142.83  Az status=0008  Ze status=0009
07:10:17 Check angles
07:10:17 SkyScan query
07:10:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.44<-20096  Statuses=0008 0009
07:10:18 Msec=750  True Az=112.995  Ze=-121.44  Az status=0008  Ze status=0009
07:10:18 Check angles
07:10:18 SkyScan query
07:10:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.485<-18699  Statuses=0008 0009
07:10:19 Msec=1500  True Az=112.995  Ze=-100.485  Az status=0008  Ze status=0009
07:10:19 Check angles
07:10:19 SkyScan query
07:10:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.515<-17301  Statuses=0008 0009
07:10:19 Msec=2250  True Az=112.995  Ze=-79.515  Az status=0008  Ze status=0009
07:10:19 Check angles
07:10:19 SkyScan query
07:10:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.575<-15905  Statuses=0008 0009
07:10:20 Msec=3000  True Az=112.995  Ze=-58.575  Az status=0008  Ze status=0009
07:10:20 Check angles
07:10:20 SkyScan query
07:10:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.62<-14508  Statuses=0008 0009
07:10:21 Msec=3750  True Az=112.995  Ze=-37.62  Az status=0008  Ze status=0009
07:10:21 Check angles
07:10:21 SkyScan query
07:10:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.65<-13110  Statuses=0008 0009
07:10:22 Msec=4500  True Az=112.995  Ze=-16.65  Az status=0008  Ze status=0009
07:10:22 Check angles
07:10:22 SkyScan query
07:10:22 SkyScan query done: ret=0  az=112.995<-7533  ze=4.245<-11717  Statuses=0008 0009
07:10:22 Msec=5250  True Az=112.995  Ze=4.245  Az status=0008  Ze status=0009
07:10:22 Check angles
07:10:22 SkyScan query
07:10:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:10:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:10:23 Message to Master queued w/err=0: serial=185706 error=0
07:10:28 Received message from Master: op=Filter serial=185707
07:10:28 Color wheel filter change from 0 to 0
07:10:28 FLIGetFilterPos err=0  currentPosition=0
07:10:28 FLIGetStepsRemaining err=0  RemainingSteps=0
07:10:28 Filter is already there-color wheel unchanged
07:10:28 Received message from Master: op=Shutter serial=185708
07:10:28 Shutter LASER close
07:10:28 Received message from Camera: op=State serial=185710
07:10:28 GetSingleValue result=40  Value=cccccccc
07:10:28 SkyScan query
07:10:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:10:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:29 Parameters OK
07:10:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:29 Set A/D data flow result=40
07:10:29 Set A/D channel type result=40
07:10:29 Set A/D encoding result=40
07:10:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:29 Set channel filter=0.000000e+000  result=40
07:10:29 Config A/D  Result=40
07:10:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:29 Get A/D filter: -9.255963e+061  result=40
07:10:29 Get A/D value=-858993460  result=40
07:10:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:10:29 Parameters OK
07:10:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:10:29 Set A/D data flow result=40
07:10:29 Set A/D channel type result=40
07:10:29 Set A/D encoding result=40
07:10:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:10:29 Set channel filter=0.000000e+000  result=40
07:10:29 Config A/D  Result=40
07:10:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:10:29 Get A/D filter: -9.255963e+061  result=40
07:10:29 Get A/D value=-858993460  result=40
07:10:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:10:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:10:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:10:29 Aux=
07:10:29 Message to Camera, serial 185710 queued
07:11:06 Received message from Master: op=PointingHead serial=185723
07:11:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:11:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:11:06 Point started: ret=0
07:11:06 point_skyscan result=0
07:11:07 Check angles
07:11:07 SkyScan query
07:11:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:11:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:11:07 Message to Master queued w/err=0: serial=185723 error=0
07:11:12 Received message from Master: op=Filter serial=185724
07:11:12 Color wheel filter change from 0 to 0
07:11:12 FLIGetFilterPos err=0  currentPosition=0
07:11:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:11:12 Filter is already there-color wheel unchanged
07:11:13 Received message from Master: op=Shutter serial=185725
07:11:13 Shutter LASER close
07:11:13 Received message from Camera: op=State serial=185727
07:11:13 GetSingleValue result=40  Value=cccccccc
07:11:13 SkyScan query
07:11:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:11:13 Parameters OK
07:11:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:11:13 Set A/D data flow result=40
07:11:13 Set A/D channel type result=40
07:11:13 Set A/D encoding result=40
07:11:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:11:13 Set channel filter=0.000000e+000  result=40
07:11:13 Config A/D  Result=40
07:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:11:13 Get A/D filter: -9.255963e+061  result=40
07:11:13 Get A/D value=-858993460  result=40
07:11:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:11:13 Parameters OK
07:11:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:11:13 Set A/D data flow result=40
07:11:13 Set A/D channel type result=40
07:11:13 Set A/D encoding result=40
07:11:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:11:13 Set channel filter=0.000000e+000  result=40
07:11:13 Config A/D  Result=40
07:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:11:13 Get A/D filter: -9.255963e+061  result=40
07:11:13 Get A/D value=-858993460  result=40
07:11:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:11:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:11:13 Aux=
07:11:13 Message to Camera, serial 185727 queued
07:11:50 Received message from Master: op=PointingHead serial=185740
07:11:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:11:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:11:50 Point started: ret=0
07:11:50 point_skyscan result=0
07:11:51 Check angles
07:11:51 SkyScan query
07:11:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:11:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:11:52 Message to Master queued w/err=0: serial=185740 error=0
07:11:57 Received message from Master: op=Filter serial=185741
07:11:57 Color wheel filter change from 0 to 0
07:11:57 FLIGetFilterPos err=0  currentPosition=0
07:11:57 FLIGetStepsRemaining err=0  RemainingSteps=0
07:11:57 Filter is already there-color wheel unchanged
07:11:57 Received message from Master: op=Shutter serial=185742
07:11:57 Shutter LASER close
07:11:57 Received message from Camera: op=State serial=185744
07:11:57 GetSingleValue result=40  Value=cccccccc
07:11:57 SkyScan query
07:11:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:11:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:11:58 Parameters OK
07:11:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:11:58 Set A/D data flow result=40
07:11:58 Set A/D channel type result=40
07:11:58 Set A/D encoding result=40
07:11:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:11:58 Set channel filter=0.000000e+000  result=40
07:11:58 Config A/D  Result=40
07:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:11:58 Get A/D filter: -9.255963e+061  result=40
07:11:58 Get A/D value=-858993460  result=40
07:11:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:11:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:11:58 Parameters OK
07:11:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:11:58 Set A/D data flow result=40
07:11:58 Set A/D channel type result=40
07:11:58 Set A/D encoding result=40
07:11:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:11:58 Set channel filter=0.000000e+000  result=40
07:11:58 Config A/D  Result=40
07:11:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:11:58 Get A/D filter: -9.255963e+061  result=40
07:11:58 Get A/D value=-858993460  result=40
07:11:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:11:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:11:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:11:58 Aux=
07:11:58 Message to Camera, serial 185744 queued
07:12:34 Received message from Master: op=PointingHead serial=185757
07:12:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:12:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:12:35 Point started: ret=0
07:12:35 point_skyscan result=0
07:12:36 Check angles
07:12:36 SkyScan query
07:12:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:12:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:12:36 Message to Master queued w/err=0: serial=185757 error=0
07:12:41 Received message from Master: op=Filter serial=185758
07:12:41 Color wheel filter change from 0 to 0
07:12:41 FLIGetFilterPos err=0  currentPosition=0
07:12:41 FLIGetStepsRemaining err=0  RemainingSteps=0
07:12:41 Filter is already there-color wheel unchanged
07:12:41 Received message from Master: op=Shutter serial=185759
07:12:41 Shutter LASER close
07:12:41 Received message from Camera: op=State serial=185761
07:12:41 GetSingleValue result=40  Value=cccccccc
07:12:41 SkyScan query
07:12:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:12:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:12:42 Parameters OK
07:12:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:12:42 Set A/D data flow result=40
07:12:42 Set A/D channel type result=40
07:12:42 Set A/D encoding result=40
07:12:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:12:42 Set channel filter=0.000000e+000  result=40
07:12:42 Config A/D  Result=40
07:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:12:42 Get A/D filter: -9.255963e+061  result=40
07:12:42 Get A/D value=-858993460  result=40
07:12:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:12:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:12:42 Parameters OK
07:12:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:12:42 Set A/D data flow result=40
07:12:42 Set A/D channel type result=40
07:12:42 Set A/D encoding result=40
07:12:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:12:42 Set channel filter=0.000000e+000  result=40
07:12:42 Config A/D  Result=40
07:12:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:12:42 Get A/D filter: -9.255963e+061  result=40
07:12:42 Get A/D value=-858993460  result=40
07:12:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:12:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:12:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:12:42 Aux=
07:12:42 Message to Camera, serial 185761 queued
07:13:19 Received message from Master: op=PointingHead serial=185774
07:13:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:13:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:13:19 Point started: ret=0
07:13:19 point_skyscan result=0
07:13:20 Check angles
07:13:20 SkyScan query
07:13:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
07:13:20 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
07:13:21 Check angles
07:13:21 SkyScan query
07:13:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
07:13:21 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
07:13:21 Check angles
07:13:21 SkyScan query
07:13:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.445<-16363  Statuses=0008 0009
07:13:22 Msec=1500  True Az=112.995  Ze=-65.445  Az status=0008  Ze status=0009
07:13:22 Check angles
07:13:22 SkyScan query
07:13:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.415<-17761  Statuses=0008 0009
07:13:23 Msec=2250  True Az=112.995  Ze=-86.415  Az status=0008  Ze status=0009
07:13:23 Check angles
07:13:23 SkyScan query
07:13:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.79<-19186  Statuses=0008 0009
07:13:23 Msec=3000  True Az=112.995  Ze=-107.79  Az status=0008  Ze status=0009
07:13:24 Check angles
07:13:24 SkyScan query
07:13:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.73<-20582  Statuses=0008 0009
07:13:24 Msec=3750  True Az=112.995  Ze=-128.73  Az status=0008  Ze status=0009
07:13:24 Check angles
07:13:24 SkyScan query
07:13:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.685<-21979  Statuses=0008 0009
07:13:25 Msec=4500  True Az=112.995  Ze=-149.685  Az status=0008  Ze status=0009
07:13:25 Check angles
07:13:25 SkyScan query
07:13:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.97<-23398  Statuses=0008 0009
07:13:26 Msec=5250  True Az=112.995  Ze=-170.97  Az status=0008  Ze status=0009
07:13:26 Check angles
07:13:26 SkyScan query
07:13:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:13:27 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:13:27 Message to Master queued w/err=0: serial=185774 error=0
07:13:32 Received message from Master: op=Filter serial=185775
07:13:32 Color wheel filter change from 0 to 0
07:13:32 FLIGetFilterPos err=0  currentPosition=0
07:13:32 FLIGetStepsRemaining err=0  RemainingSteps=0
07:13:32 Filter is already there-color wheel unchanged
07:13:32 Received message from Master: op=Shutter serial=185776
07:13:32 Shutter LASER open
07:13:32 Received message from Camera: op=State serial=185778
07:13:32 GetSingleValue result=40  Value=cccccccc
07:13:32 SkyScan query
07:13:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:13:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:13:32 Parameters OK
07:13:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:13:32 Set A/D data flow result=40
07:13:32 Set A/D channel type result=40
07:13:32 Set A/D encoding result=40
07:13:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:13:32 Set channel filter=0.000000e+000  result=40
07:13:32 Config A/D  Result=40
07:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:13:32 Get A/D filter: -9.255963e+061  result=40
07:13:32 Get A/D value=-858993460  result=40
07:13:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:13:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:13:32 Parameters OK
07:13:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:13:32 Set A/D data flow result=40
07:13:32 Set A/D channel type result=40
07:13:32 Set A/D encoding result=40
07:13:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:13:32 Set channel filter=0.000000e+000  result=40
07:13:32 Config A/D  Result=40
07:13:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:13:32 Get A/D filter: -9.255963e+061  result=40
07:13:32 Get A/D value=-858993460  result=40
07:13:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:13:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:13:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:13:32 Aux=
07:13:32 Message to Camera, serial 185778 queued
07:13:41 Received message from Master: op=Shutter serial=185788
07:13:41 Shutter LASER close
07:13:41 Received message from Master: op=PointingHead serial=185792
07:13:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:13:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:13:42 Point started: ret=0
07:13:42 point_skyscan result=0
07:13:43 Check angles
07:13:43 SkyScan query
07:13:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
07:13:43 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
07:13:43 Check angles
07:13:43 SkyScan query
07:13:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
07:13:44 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
07:13:44 Check angles
07:13:44 SkyScan query
07:13:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.115<-18741  Statuses=0008 0009
07:13:45 Msec=1500  True Az=112.995  Ze=-101.115  Az status=0008  Ze status=0009
07:13:45 Check angles
07:13:45 SkyScan query
07:13:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.175<-17345  Statuses=0008 0009
07:13:45 Msec=2250  True Az=112.995  Ze=-80.175  Az status=0008  Ze status=0009
07:13:46 Check angles
07:13:46 SkyScan query
07:13:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.22<-15948  Statuses=0008 0009
07:13:46 Msec=3000  True Az=112.995  Ze=-59.22  Az status=0008  Ze status=0009
07:13:46 Check angles
07:13:46 SkyScan query
07:13:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.815<-14521  Statuses=0008 0009
07:13:47 Msec=3750  True Az=112.995  Ze=-37.815  Az status=0008  Ze status=0009
07:13:47 Check angles
07:13:47 SkyScan query
07:13:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.845<-13123  Statuses=0008 0009
07:13:48 Msec=4500  True Az=112.995  Ze=-16.845  Az status=0008  Ze status=0009
07:13:48 Check angles
07:13:48 SkyScan query
07:13:48 SkyScan query done: ret=0  az=112.995<-7533  ze=4.44<-11704  Statuses=0008 0009
07:13:48 Msec=5250  True Az=112.995  Ze=4.44  Az status=0008  Ze status=0009
07:13:49 Check angles
07:13:49 SkyScan query
07:13:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:13:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:13:49 Message to Master queued w/err=0: serial=185792 error=0
07:13:54 Received message from Master: op=Filter serial=185793
07:13:54 Color wheel filter change from 0 to 0
07:13:54 FLIGetFilterPos err=0  currentPosition=0
07:13:54 FLIGetStepsRemaining err=0  RemainingSteps=0
07:13:54 Filter is already there-color wheel unchanged
07:13:54 Received message from Master: op=Shutter serial=185794
07:13:54 Shutter LASER close
07:13:55 Received message from Camera: op=State serial=185796
07:13:55 GetSingleValue result=40  Value=cccccccc
07:13:55 SkyScan query
07:13:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:13:55 Parameters OK
07:13:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:13:55 Set A/D data flow result=40
07:13:55 Set A/D channel type result=40
07:13:55 Set A/D encoding result=40
07:13:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:13:55 Set channel filter=0.000000e+000  result=40
07:13:55 Config A/D  Result=40
07:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:13:55 Get A/D filter: -9.255963e+061  result=40
07:13:55 Get A/D value=-858993460  result=40
07:13:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:13:55 Parameters OK
07:13:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:13:55 Set A/D data flow result=40
07:13:55 Set A/D channel type result=40
07:13:55 Set A/D encoding result=40
07:13:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:13:55 Set channel filter=0.000000e+000  result=40
07:13:55 Config A/D  Result=40
07:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:13:55 Get A/D filter: -9.255963e+061  result=40
07:13:55 Get A/D value=-858993460  result=40
07:13:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:13:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:13:55 Aux=
07:13:55 Message to Camera, serial 185796 queued
07:14:32 Received message from Master: op=PointingHead serial=185809
07:14:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:14:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:14:32 Point started: ret=0
07:14:32 point_skyscan result=0
07:14:33 Check angles
07:14:33 SkyScan query
07:14:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:14:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:14:34 Message to Master queued w/err=0: serial=185809 error=0
07:14:39 Received message from Master: op=Filter serial=185810
07:14:39 Color wheel filter change from 0 to 0
[UTC 2019-3-9  07:14:39]
07:14:39 FLIGetFilterPos err=0  currentPosition=0
07:14:39 FLIGetStepsRemaining err=0  RemainingSteps=0
07:14:39 Filter is already there-color wheel unchanged
07:14:39 Received message from Master: op=Shutter serial=185811
07:14:39 Shutter LASER close
07:14:39 Received message from Camera: op=State serial=185813
07:14:39 GetSingleValue result=40  Value=cccccccc
07:14:39 SkyScan query
07:14:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:14:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:14:39 Parameters OK
07:14:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:14:39 Set A/D data flow result=40
07:14:39 Set A/D channel type result=40
07:14:39 Set A/D encoding result=40
07:14:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:14:39 Set channel filter=0.000000e+000  result=40
07:14:39 Config A/D  Result=40
07:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:14:39 Get A/D filter: -9.255963e+061  result=40
07:14:39 Get A/D value=-858993460  result=40
07:14:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:14:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:14:39 Parameters OK
07:14:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:14:39 Set A/D data flow result=40
07:14:39 Set A/D channel type result=40
07:14:39 Set A/D encoding result=40
07:14:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:14:39 Set channel filter=0.000000e+000  result=40
07:14:39 Config A/D  Result=40
07:14:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:14:39 Get A/D filter: -9.255963e+061  result=40
07:14:39 Get A/D value=-858993460  result=40
07:14:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:14:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:14:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:14:39 Aux=
07:14:39 Message to Camera, serial 185813 queued
07:15:16 Received message from Master: op=PointingHead serial=185826
07:15:16 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:15:16 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:15:17 Point started: ret=0
07:15:17 point_skyscan result=0
07:15:17 Check angles
07:15:17 SkyScan query
07:15:18 SkyScan query done: ret=0  az=136.14<-9076  ze=-6.51<-12434  Statuses=0009 0008
07:15:18 Msec=0  True Az=136.14  Ze=-6.51  Az status=0009  Ze status=0008
07:15:18 Check angles
07:15:18 SkyScan query
07:15:19 SkyScan query done: ret=0  az=153.915<-10261  ze=-6.495<-12433  Statuses=0009 0008
07:15:19 Msec=750  True Az=153.915  Ze=-6.495  Az status=0009  Ze status=0008
07:15:19 Check angles
07:15:19 SkyScan query
07:15:19 SkyScan query done: ret=0  az=171.36<-11424  ze=-6.495<-12433  Statuses=0009 0008
07:15:19 Msec=1500  True Az=171.36  Ze=-6.495  Az status=0009  Ze status=0008
07:15:20 Check angles
07:15:20 SkyScan query
07:15:20 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:15:20 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:15:20 Message to Master queued w/err=0: serial=185826 error=0
07:15:25 Received message from Master: op=Filter serial=185827
07:15:25 Color wheel filter change from 0 to 0
07:15:25 FLIGetFilterPos err=0  currentPosition=0
07:15:25 FLIGetStepsRemaining err=0  RemainingSteps=0
07:15:25 Filter is already there-color wheel unchanged
07:15:25 Received message from Master: op=Shutter serial=185828
07:15:25 Shutter LASER close
07:15:25 Received message from Camera: op=State serial=185830
07:15:25 GetSingleValue result=40  Value=cccccccc
07:15:25 SkyScan query
07:15:26 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:15:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:15:26 Parameters OK
07:15:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:15:26 Set A/D data flow result=40
07:15:26 Set A/D channel type result=40
07:15:26 Set A/D encoding result=40
07:15:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:15:26 Set channel filter=0.000000e+000  result=40
07:15:26 Config A/D  Result=40
07:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:15:26 Get A/D filter: -9.255963e+061  result=40
07:15:26 Get A/D value=-858993460  result=40
07:15:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:15:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:15:26 Parameters OK
07:15:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:15:26 Set A/D data flow result=40
07:15:26 Set A/D channel type result=40
07:15:26 Set A/D encoding result=40
07:15:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:15:26 Set channel filter=0.000000e+000  result=40
07:15:26 Config A/D  Result=40
07:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:15:26 Get A/D filter: -9.255963e+061  result=40
07:15:26 Get A/D value=-858993460  result=40
07:15:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:15:26 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:15:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:15:26 Aux=
07:15:26 Message to Camera, serial 185830 queued
07:16:03 Received message from Master: op=PointingHead serial=185843
07:16:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:16:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:16:03 Point started: ret=0
07:16:03 point_skyscan result=0
07:16:04 Check angles
07:16:04 SkyScan query
07:16:05 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
07:16:05 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
07:16:05 Check angles
07:16:05 SkyScan query
07:16:05 SkyScan query done: ret=0  az=135.33<-9022  ze=6.495<-11567  Statuses=0009 0008
07:16:05 Msec=750  True Az=135.33  Ze=6.495  Az status=0009  Ze status=0008
07:16:05 Check angles
07:16:05 SkyScan query
07:16:06 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
07:16:06 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
07:16:06 Check angles
07:16:06 SkyScan query
07:16:07 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
07:16:07 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
07:16:07 Message to Master queued w/err=0: serial=185843 error=0
07:16:12 Received message from Master: op=Filter serial=185844
07:16:12 Color wheel filter change from 0 to 0
07:16:12 FLIGetFilterPos err=0  currentPosition=0
07:16:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:16:12 Filter is already there-color wheel unchanged
07:16:12 Received message from Master: op=Shutter serial=185845
07:16:12 Shutter LASER close
07:16:12 Received message from Camera: op=State serial=185847
07:16:12 GetSingleValue result=40  Value=cccccccc
07:16:12 SkyScan query
07:16:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:16:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:16:13 Parameters OK
07:16:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:16:13 Set A/D data flow result=40
07:16:13 Set A/D channel type result=40
07:16:13 Set A/D encoding result=40
07:16:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:16:13 Set channel filter=0.000000e+000  result=40
07:16:13 Config A/D  Result=40
07:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:16:13 Get A/D filter: -9.255963e+061  result=40
07:16:13 Get A/D value=-858993460  result=40
07:16:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:16:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:16:13 Parameters OK
07:16:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:16:13 Set A/D data flow result=40
07:16:13 Set A/D channel type result=40
07:16:13 Set A/D encoding result=40
07:16:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:16:13 Set channel filter=0.000000e+000  result=40
07:16:13 Config A/D  Result=40
07:16:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:16:13 Get A/D filter: -9.255963e+061  result=40
07:16:13 Get A/D value=-858993460  result=40
07:16:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:16:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:16:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:16:13 Aux=
07:16:13 Message to Camera, serial 185847 queued
07:16:48 Received message from Master: op=PointingHead serial=185859
07:16:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:16:48 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:16:49 Point started: ret=0
07:16:49 point_skyscan result=0
07:16:50 Check angles
07:16:50 SkyScan query
07:16:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
07:16:50 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
07:16:50 Check angles
07:16:50 SkyScan query
07:16:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.52<-14968  Statuses=0008 0009
07:16:51 Msec=750  True Az=112.995  Ze=-44.52  Az status=0008  Ze status=0009
07:16:51 Check angles
07:16:51 SkyScan query
07:16:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.475<-16365  Statuses=0008 0009
07:16:52 Msec=1500  True Az=112.995  Ze=-65.475  Az status=0008  Ze status=0009
07:16:52 Check angles
07:16:52 SkyScan query
07:16:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.43<-17762  Statuses=0008 0009
07:16:52 Msec=2250  True Az=112.995  Ze=-86.43  Az status=0008  Ze status=0009
07:16:53 Check angles
07:16:53 SkyScan query
07:16:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
07:16:53 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
07:16:53 Check angles
07:16:53 SkyScan query
07:16:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.31<-20554  Statuses=0008 0009
07:16:54 Msec=3750  True Az=112.995  Ze=-128.31  Az status=0008  Ze status=0009
07:16:54 Check angles
07:16:54 SkyScan query
07:16:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
07:16:55 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
07:16:55 Check angles
07:16:55 SkyScan query
07:16:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
07:16:55 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
07:16:56 Check angles
07:16:56 SkyScan query
07:16:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:16:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:16:56 Message to Master queued w/err=0: serial=185859 error=0
07:17:01 Received message from Master: op=Filter serial=185860
07:17:01 Color wheel filter change from 0 to 0
07:17:01 FLIGetFilterPos err=0  currentPosition=0
07:17:01 FLIGetStepsRemaining err=0  RemainingSteps=0
07:17:01 Filter is already there-color wheel unchanged
07:17:01 Received message from Master: op=Shutter serial=185861
07:17:01 Shutter LASER open
07:17:02 Received message from Camera: op=State serial=185863
07:17:02 GetSingleValue result=40  Value=cccccccc
07:17:02 SkyScan query
07:17:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:17:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:02 Parameters OK
07:17:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:02 Set A/D data flow result=40
07:17:02 Set A/D channel type result=40
07:17:02 Set A/D encoding result=40
07:17:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:02 Set channel filter=0.000000e+000  result=40
07:17:02 Config A/D  Result=40
07:17:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:02 Get A/D filter: -9.255963e+061  result=40
07:17:02 Get A/D value=-858993460  result=40
07:17:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:02 Parameters OK
07:17:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:02 Set A/D data flow result=40
07:17:02 Set A/D channel type result=40
07:17:02 Set A/D encoding result=40
07:17:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:02 Set channel filter=0.000000e+000  result=40
07:17:02 Config A/D  Result=40
07:17:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:02 Get A/D filter: -9.255963e+061  result=40
07:17:02 Get A/D value=-858993460  result=40
07:17:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:17:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:17:02 Aux=
07:17:02 Message to Camera, serial 185863 queued
07:17:10 Received message from Master: op=Shutter serial=185872
07:17:10 Shutter LASER close
07:17:10 Received message from Master: op=PointingHead serial=185876
07:17:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:17:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:17:10 Point started: ret=0
07:17:10 point_skyscan result=0
07:17:11 Check angles
07:17:11 SkyScan query
07:17:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.355<-21557  Statuses=0008 0009
07:17:12 Msec=0  True Az=112.995  Ze=-143.355  Az status=0008  Ze status=0009
07:17:12 Check angles
07:17:12 SkyScan query
07:17:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.935<-20129  Statuses=0008 0009
07:17:12 Msec=750  True Az=112.995  Ze=-121.935  Az status=0008  Ze status=0009
07:17:13 Check angles
07:17:13 SkyScan query
07:17:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.01<-18734  Statuses=0008 0009
07:17:13 Msec=1500  True Az=112.995  Ze=-101.01  Az status=0008  Ze status=0009
07:17:13 Check angles
07:17:13 SkyScan query
07:17:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.055<-17337  Statuses=0008 0009
07:17:14 Msec=2250  True Az=112.995  Ze=-80.055  Az status=0008  Ze status=0009
07:17:14 Check angles
07:17:14 SkyScan query
07:17:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.115<-15941  Statuses=0008 0009
07:17:15 Msec=3000  True Az=112.995  Ze=-59.115  Az status=0008  Ze status=0009
07:17:15 Check angles
07:17:15 SkyScan query
07:17:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.13<-14542  Statuses=0008 0009
07:17:15 Msec=3750  True Az=112.995  Ze=-38.13  Az status=0008  Ze status=0009
07:17:16 Check angles
07:17:16 SkyScan query
07:17:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.725<-13115  Statuses=0008 0009
07:17:16 Msec=4500  True Az=112.995  Ze=-16.725  Az status=0008  Ze status=0009
07:17:16 Check angles
07:17:16 SkyScan query
07:17:17 SkyScan query done: ret=0  az=112.995<-7533  ze=4.515<-11699  Statuses=0008 0009
07:17:17 Msec=5250  True Az=112.995  Ze=4.515  Az status=0008  Ze status=0009
07:17:17 Check angles
07:17:17 SkyScan query
07:17:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:17:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:17:18 Message to Master queued w/err=0: serial=185876 error=0
07:17:23 Received message from Master: op=Filter serial=185877
07:17:23 Color wheel filter change from 0 to 0
07:17:23 FLIGetFilterPos err=0  currentPosition=0
07:17:23 FLIGetStepsRemaining err=0  RemainingSteps=0
07:17:23 Filter is already there-color wheel unchanged
07:17:23 Received message from Master: op=Shutter serial=185878
07:17:23 Shutter LASER close
07:17:23 Received message from Camera: op=State serial=185880
07:17:23 GetSingleValue result=40  Value=cccccccc
07:17:23 SkyScan query
07:17:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:17:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:24 Parameters OK
07:17:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:24 Set A/D data flow result=40
07:17:24 Set A/D channel type result=40
07:17:24 Set A/D encoding result=40
07:17:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:24 Set channel filter=0.000000e+000  result=40
07:17:24 Config A/D  Result=40
07:17:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:24 Get A/D filter: -9.255963e+061  result=40
07:17:24 Get A/D value=-858993460  result=40
07:17:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:17:24 Parameters OK
07:17:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:17:24 Set A/D data flow result=40
07:17:24 Set A/D channel type result=40
07:17:24 Set A/D encoding result=40
07:17:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:17:24 Set channel filter=0.000000e+000  result=40
07:17:24 Config A/D  Result=40
07:17:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:17:24 Get A/D filter: -9.255963e+061  result=40
07:17:24 Get A/D value=-858993460  result=40
07:17:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:17:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:17:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:17:24 Aux=
07:17:24 Message to Camera, serial 185880 queued
07:18:01 Received message from Master: op=PointingHead serial=185893
07:18:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:18:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:18:01 Point started: ret=0
07:18:01 point_skyscan result=0
07:18:02 Check angles
07:18:02 SkyScan query
07:18:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:18:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:18:02 Message to Master queued w/err=0: serial=185893 error=0
07:18:07 Received message from Master: op=Filter serial=185894
07:18:07 Color wheel filter change from 0 to 0
07:18:07 FLIGetFilterPos err=0  currentPosition=0
07:18:07 FLIGetStepsRemaining err=0  RemainingSteps=0
07:18:07 Filter is already there-color wheel unchanged
07:18:07 Received message from Master: op=Shutter serial=185895
07:18:07 Shutter LASER close
07:18:07 Received message from Camera: op=State serial=185897
07:18:07 GetSingleValue result=40  Value=cccccccc
07:18:07 SkyScan query
07:18:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:18:08 Parameters OK
07:18:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:18:08 Set A/D data flow result=40
07:18:08 Set A/D channel type result=40
07:18:08 Set A/D encoding result=40
07:18:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:18:08 Set channel filter=0.000000e+000  result=40
07:18:08 Config A/D  Result=40
07:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:18:08 Get A/D filter: -9.255963e+061  result=40
07:18:08 Get A/D value=-858993460  result=40
07:18:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:18:08 Parameters OK
07:18:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:18:08 Set A/D data flow result=40
07:18:08 Set A/D channel type result=40
07:18:08 Set A/D encoding result=40
07:18:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:18:08 Set channel filter=0.000000e+000  result=40
07:18:08 Config A/D  Result=40
07:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:18:08 Get A/D filter: -9.255963e+061  result=40
07:18:08 Get A/D value=-858993460  result=40
07:18:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:18:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:18:08 Aux=
07:18:08 Message to Camera, serial 185897 queued
07:18:45 Received message from Master: op=PointingHead serial=185910
07:18:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:18:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:18:45 Point started: ret=0
07:18:45 point_skyscan result=0
07:18:46 Check angles
07:18:46 SkyScan query
07:18:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:18:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:18:46 Message to Master queued w/err=0: serial=185910 error=0
07:18:51 Received message from Master: op=Filter serial=185911
07:18:51 Color wheel filter change from 0 to 0
07:18:51 FLIGetFilterPos err=0  currentPosition=0
07:18:51 FLIGetStepsRemaining err=0  RemainingSteps=0
07:18:51 Filter is already there-color wheel unchanged
07:18:52 Received message from Master: op=Shutter serial=185912
07:18:52 Shutter LASER close
07:18:52 Received message from Camera: op=State serial=185914
07:18:52 GetSingleValue result=40  Value=cccccccc
07:18:52 SkyScan query
07:18:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:18:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:18:52 Parameters OK
07:18:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:18:52 Set A/D data flow result=40
07:18:52 Set A/D channel type result=40
07:18:52 Set A/D encoding result=40
07:18:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:18:52 Set channel filter=0.000000e+000  result=40
07:18:52 Config A/D  Result=40
07:18:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:18:52 Get A/D filter: -9.255963e+061  result=40
07:18:52 Get A/D value=-858993460  result=40
07:18:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:18:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:18:52 Parameters OK
07:18:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:18:52 Set A/D data flow result=40
07:18:52 Set A/D channel type result=40
07:18:52 Set A/D encoding result=40
07:18:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:18:52 Set channel filter=0.000000e+000  result=40
07:18:52 Config A/D  Result=40
07:18:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:18:52 Get A/D filter: -9.255963e+061  result=40
07:18:52 Get A/D value=-858993460  result=40
07:18:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:18:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:18:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:18:52 Aux=
07:18:52 Message to Camera, serial 185914 queued
07:19:29 Received message from Master: op=PointingHead serial=185927
07:19:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:19:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:19:29 Point started: ret=0
07:19:29 point_skyscan result=0
07:19:30 Check angles
07:19:30 SkyScan query
07:19:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:19:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:19:31 Message to Master queued w/err=0: serial=185927 error=0
07:19:36 Received message from Master: op=Filter serial=185928
07:19:36 Color wheel filter change from 0 to 0
07:19:36 FLIGetFilterPos err=0  currentPosition=0
07:19:36 FLIGetStepsRemaining err=0  RemainingSteps=0
07:19:36 Filter is already there-color wheel unchanged
07:19:36 Received message from Master: op=Shutter serial=185929
07:19:36 Shutter LASER close
07:19:36 Received message from Camera: op=State serial=185931
07:19:36 GetSingleValue result=40  Value=cccccccc
07:19:36 SkyScan query
07:19:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:19:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:19:37 Parameters OK
07:19:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:19:37 Set A/D data flow result=40
07:19:37 Set A/D channel type result=40
07:19:37 Set A/D encoding result=40
07:19:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:19:37 Set channel filter=0.000000e+000  result=40
07:19:37 Config A/D  Result=40
07:19:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:19:37 Get A/D filter: -9.255963e+061  result=40
07:19:37 Get A/D value=-858993460  result=40
07:19:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:19:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:19:37 Parameters OK
07:19:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:19:37 Set A/D data flow result=40
07:19:37 Set A/D channel type result=40
07:19:37 Set A/D encoding result=40
07:19:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:19:37 Set channel filter=0.000000e+000  result=40
07:19:37 Config A/D  Result=40
07:19:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:19:37 Get A/D filter: -9.255963e+061  result=40
07:19:37 Get A/D value=-858993460  result=40
07:19:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:19:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:19:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:19:37 Aux=
07:19:37 Message to Camera, serial 185931 queued
07:20:13 Received message from Master: op=PointingHead serial=185944
07:20:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:20:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:20:14 Point started: ret=0
07:20:14 point_skyscan result=0
07:20:15 Check angles
07:20:15 SkyScan query
07:20:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.88<-13592  Statuses=0008 0009
07:20:15 Msec=0  True Az=112.995  Ze=-23.88  Az status=0008  Ze status=0009
07:20:15 Check angles
07:20:15 SkyScan query
07:20:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.255<-15017  Statuses=0008 0009
07:20:16 Msec=750  True Az=112.995  Ze=-45.255  Az status=0008  Ze status=0009
07:20:16 Check angles
07:20:16 SkyScan query
07:20:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.195<-16413  Statuses=0008 0009
07:20:17 Msec=1500  True Az=112.995  Ze=-66.195  Az status=0008  Ze status=0009
07:20:17 Check angles
07:20:17 SkyScan query
07:20:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.165<-17811  Statuses=0008 0009
07:20:17 Msec=2250  True Az=112.995  Ze=-87.165  Az status=0008  Ze status=0009
07:20:18 Check angles
07:20:18 SkyScan query
07:20:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.105<-19207  Statuses=0008 0009
07:20:18 Msec=3000  True Az=112.995  Ze=-108.105  Az status=0008  Ze status=0009
07:20:18 Check angles
07:20:18 SkyScan query
07:20:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.06<-20604  Statuses=0008 0009
07:20:19 Msec=3750  True Az=112.995  Ze=-129.06  Az status=0008  Ze status=0009
07:20:19 Check angles
07:20:19 SkyScan query
07:20:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.45<-22030  Statuses=0008 0009
07:20:20 Msec=4500  True Az=112.995  Ze=-150.45  Az status=0008  Ze status=0009
07:20:20 Check angles
07:20:20 SkyScan query
07:20:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.21<-23414  Statuses=0008 0009
07:20:20 Msec=5250  True Az=112.995  Ze=-171.21  Az status=0008  Ze status=0009
07:20:21 Check angles
07:20:21 SkyScan query
07:20:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:20:21 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:20:21 Message to Master queued w/err=0: serial=185944 error=0
07:20:26 Received message from Master: op=Filter serial=185945
07:20:26 Color wheel filter change from 0 to 0
07:20:26 FLIGetFilterPos err=0  currentPosition=0
07:20:26 FLIGetStepsRemaining err=0  RemainingSteps=0
07:20:26 Filter is already there-color wheel unchanged
07:20:26 Received message from Master: op=Shutter serial=185946
07:20:26 Shutter LASER open
07:20:27 Received message from Camera: op=State serial=185948
07:20:27 GetSingleValue result=40  Value=cccccccc
07:20:27 SkyScan query
07:20:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:20:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:27 Parameters OK
07:20:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:27 Set A/D data flow result=40
07:20:27 Set A/D channel type result=40
07:20:27 Set A/D encoding result=40
07:20:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:27 Set channel filter=0.000000e+000  result=40
07:20:27 Config A/D  Result=40
07:20:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:27 Get A/D filter: -9.255963e+061  result=40
07:20:27 Get A/D value=-858993460  result=40
07:20:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:27 Parameters OK
07:20:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:27 Set A/D data flow result=40
07:20:27 Set A/D channel type result=40
07:20:27 Set A/D encoding result=40
07:20:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:27 Set channel filter=0.000000e+000  result=40
07:20:27 Config A/D  Result=40
07:20:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:27 Get A/D filter: -9.255963e+061  result=40
07:20:27 Get A/D value=-858993460  result=40
07:20:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:20:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:20:27 Aux=
07:20:27 Message to Camera, serial 185948 queued
07:20:36 Received message from Master: op=Shutter serial=185958
07:20:36 Shutter LASER close
07:20:36 Received message from Master: op=PointingHead serial=185962
07:20:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:20:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:20:36 Point started: ret=0
07:20:36 point_skyscan result=0
07:20:37 Check angles
07:20:37 SkyScan query
07:20:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.95<-21530  Statuses=0008 0009
07:20:38 Msec=0  True Az=112.995  Ze=-142.95  Az status=0008  Ze status=0009
07:20:38 Check angles
07:20:38 SkyScan query
07:20:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.98<-20132  Statuses=0008 0009
07:20:38 Msec=750  True Az=112.995  Ze=-121.98  Az status=0008  Ze status=0009
07:20:39 Check angles
07:20:39 SkyScan query
07:20:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.62<-18708  Statuses=0008 0009
07:20:39 Msec=1500  True Az=112.995  Ze=-100.62  Az status=0008  Ze status=0009
07:20:39 Check angles
07:20:39 SkyScan query
07:20:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
07:20:40 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
07:20:40 Check angles
07:20:40 SkyScan query
07:20:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.71<-15914  Statuses=0008 0009
07:20:41 Msec=3000  True Az=112.995  Ze=-58.71  Az status=0008  Ze status=0009
07:20:41 Check angles
07:20:41 SkyScan query
07:20:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.32<-14488  Statuses=0008 0009
07:20:42 Msec=3750  True Az=112.995  Ze=-37.32  Az status=0008  Ze status=0009
07:20:42 Check angles
07:20:42 SkyScan query
07:20:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.335<-13089  Statuses=0008 0009
07:20:42 Msec=4500  True Az=112.995  Ze=-16.335  Az status=0008  Ze status=0009
07:20:42 Check angles
07:20:42 SkyScan query
07:20:43 SkyScan query done: ret=0  az=112.995<-7533  ze=4.485<-11701  Statuses=0008 0009
07:20:43 Msec=5250  True Az=112.995  Ze=4.485  Az status=0008  Ze status=0009
07:20:43 Check angles
07:20:43 SkyScan query
07:20:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:20:44 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:20:44 Message to Master queued w/err=0: serial=185962 error=0
07:20:49 Received message from Master: op=Filter serial=185963
07:20:49 Color wheel filter change from 0 to 0
07:20:49 FLIGetFilterPos err=0  currentPosition=0
07:20:49 FLIGetStepsRemaining err=0  RemainingSteps=0
07:20:49 Filter is already there-color wheel unchanged
07:20:49 Received message from Master: op=Shutter serial=185964
07:20:49 Shutter LASER close
07:20:49 Received message from Camera: op=State serial=185966
07:20:49 GetSingleValue result=40  Value=cccccccc
07:20:49 SkyScan query
07:20:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:20:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:50 Parameters OK
07:20:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:50 Set A/D data flow result=40
07:20:50 Set A/D channel type result=40
07:20:50 Set A/D encoding result=40
07:20:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:50 Set channel filter=0.000000e+000  result=40
07:20:50 Config A/D  Result=40
07:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:50 Get A/D filter: -9.255963e+061  result=40
07:20:50 Get A/D value=-858993460  result=40
07:20:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:20:50 Parameters OK
07:20:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:20:50 Set A/D data flow result=40
07:20:50 Set A/D channel type result=40
07:20:50 Set A/D encoding result=40
07:20:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:20:50 Set channel filter=0.000000e+000  result=40
07:20:50 Config A/D  Result=40
07:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:20:50 Get A/D filter: -9.255963e+061  result=40
07:20:50 Get A/D value=-858993460  result=40
07:20:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:20:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:20:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:20:50 Aux=
07:20:50 Message to Camera, serial 185966 queued
07:21:27 Received message from Master: op=PointingHead serial=185979
07:21:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:21:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:21:27 Point started: ret=0
07:21:27 point_skyscan result=0
07:21:28 Check angles
07:21:28 SkyScan query
07:21:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:21:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:21:28 Message to Master queued w/err=0: serial=185979 error=0
07:21:33 Received message from Master: op=Filter serial=185980
07:21:33 Color wheel filter change from 0 to 0
07:21:33 FLIGetFilterPos err=0  currentPosition=0
07:21:33 FLIGetStepsRemaining err=0  RemainingSteps=0
07:21:33 Filter is already there-color wheel unchanged
07:21:33 Received message from Master: op=Shutter serial=185981
07:21:33 Shutter LASER close
07:21:34 Received message from Camera: op=State serial=185983
07:21:34 GetSingleValue result=40  Value=cccccccc
07:21:34 SkyScan query
07:21:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:21:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:21:34 Parameters OK
07:21:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:21:34 Set A/D data flow result=40
07:21:34 Set A/D channel type result=40
07:21:34 Set A/D encoding result=40
07:21:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:21:34 Set channel filter=0.000000e+000  result=40
07:21:34 Config A/D  Result=40
07:21:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:21:34 Get A/D filter: -9.255963e+061  result=40
07:21:34 Get A/D value=-858993460  result=40
07:21:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:21:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:21:34 Parameters OK
07:21:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:21:34 Set A/D data flow result=40
07:21:34 Set A/D channel type result=40
07:21:34 Set A/D encoding result=40
07:21:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:21:34 Set channel filter=0.000000e+000  result=40
07:21:34 Config A/D  Result=40
07:21:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:21:34 Get A/D filter: -9.255963e+061  result=40
07:21:34 Get A/D value=-858993460  result=40
07:21:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:21:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:21:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:21:34 Aux=
07:21:34 Message to Camera, serial 185983 queued
07:22:11 Received message from Master: op=PointingHead serial=185996
07:22:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:22:11 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:22:11 Point started: ret=0
07:22:11 point_skyscan result=0
07:22:12 Check angles
07:22:12 SkyScan query
07:22:13 SkyScan query done: ret=0  az=136.395<-9093  ze=-6.51<-12434  Statuses=0009 0008
07:22:13 Msec=0  True Az=136.395  Ze=-6.51  Az status=0009  Ze status=0008
07:22:13 Check angles
07:22:13 SkyScan query
07:22:13 SkyScan query done: ret=0  az=154.23<-10282  ze=-6.495<-12433  Statuses=0009 0008
07:22:13 Msec=750  True Az=154.23  Ze=-6.495  Az status=0009  Ze status=0008
07:22:14 Check angles
07:22:14 SkyScan query
07:22:14 SkyScan query done: ret=0  az=171.78<-11452  ze=-6.495<-12433  Statuses=0009 0008
07:22:14 Msec=1500  True Az=171.78  Ze=-6.495  Az status=0009  Ze status=0008
07:22:14 Check angles
07:22:14 SkyScan query
07:22:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:22:15 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:22:15 Message to Master queued w/err=0: serial=185996 error=0
07:22:20 Received message from Master: op=Filter serial=185997
07:22:20 Color wheel filter change from 0 to 0
07:22:20 FLIGetFilterPos err=0  currentPosition=0
07:22:20 FLIGetStepsRemaining err=0  RemainingSteps=0
07:22:20 Filter is already there-color wheel unchanged
07:22:20 Received message from Master: op=Shutter serial=185998
07:22:20 Shutter LASER close
07:22:20 Received message from Camera: op=State serial=186000
07:22:20 GetSingleValue result=40  Value=cccccccc
07:22:20 SkyScan query
07:22:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:22:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:22:21 Parameters OK
07:22:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:22:21 Set A/D data flow result=40
07:22:21 Set A/D channel type result=40
07:22:21 Set A/D encoding result=40
07:22:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:22:21 Set channel filter=0.000000e+000  result=40
07:22:21 Config A/D  Result=40
07:22:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:22:21 Get A/D filter: -9.255963e+061  result=40
07:22:21 Get A/D value=-858993460  result=40
07:22:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:22:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:22:21 Parameters OK
07:22:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:22:21 Set A/D data flow result=40
07:22:21 Set A/D channel type result=40
07:22:21 Set A/D encoding result=40
07:22:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:22:21 Set channel filter=0.000000e+000  result=40
07:22:21 Config A/D  Result=40
07:22:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:22:21 Get A/D filter: -9.255963e+061  result=40
07:22:21 Get A/D value=-858993460  result=40
07:22:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:22:21 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:22:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:22:21 Aux=
07:22:21 Message to Camera, serial 186000 queued
07:22:58 Received message from Master: op=PointingHead serial=186013
07:22:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:22:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:22:58 Point started: ret=0
07:22:58 point_skyscan result=0
07:22:59 Check angles
07:22:59 SkyScan query
07:22:59 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
07:22:59 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
07:22:59 Check angles
07:22:59 SkyScan query
07:23:00 SkyScan query done: ret=0  az=135.39<-9026  ze=6.495<-11567  Statuses=0009 0008
07:23:00 Msec=750  True Az=135.39  Ze=6.495  Az status=0009  Ze status=0008
07:23:00 Check angles
07:23:00 SkyScan query
07:23:01 SkyScan query done: ret=0  az=117.96<-7864  ze=6.495<-11567  Statuses=0009 0008
07:23:01 Msec=1500  True Az=117.96  Ze=6.495  Az status=0009  Ze status=0008
07:23:01 Check angles
07:23:01 SkyScan query
07:23:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:23:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:23:01 Message to Master queued w/err=0: serial=186013 error=0
07:23:06 Received message from Master: op=Filter serial=186014
07:23:06 Color wheel filter change from 0 to 0
07:23:06 FLIGetFilterPos err=0  currentPosition=0
07:23:06 FLIGetStepsRemaining err=0  RemainingSteps=0
07:23:06 Filter is already there-color wheel unchanged
07:23:07 Received message from Master: op=Shutter serial=186015
07:23:07 Shutter LASER close
07:23:07 Received message from Camera: op=State serial=186017
07:23:07 GetSingleValue result=40  Value=cccccccc
07:23:07 SkyScan query
07:23:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:23:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:23:07 Parameters OK
07:23:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:23:07 Set A/D data flow result=40
07:23:07 Set A/D channel type result=40
07:23:07 Set A/D encoding result=40
07:23:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:23:07 Set channel filter=0.000000e+000  result=40
07:23:07 Config A/D  Result=40
07:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:23:07 Get A/D filter: -9.255963e+061  result=40
07:23:07 Get A/D value=-858993460  result=40
07:23:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:23:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:23:07 Parameters OK
07:23:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:23:07 Set A/D data flow result=40
07:23:07 Set A/D channel type result=40
07:23:07 Set A/D encoding result=40
07:23:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:23:07 Set channel filter=0.000000e+000  result=40
07:23:07 Config A/D  Result=40
07:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:23:07 Get A/D filter: -9.255963e+061  result=40
07:23:07 Get A/D value=-858993460  result=40
07:23:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:23:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:23:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:23:07 Aux=
07:23:07 Message to Camera, serial 186017 queued
07:23:44 Received message from Master: op=PointingHead serial=186030
07:23:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:23:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:23:44 Point started: ret=0
07:23:44 point_skyscan result=0
07:23:45 Check angles
07:23:45 SkyScan query
07:23:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
07:23:46 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
07:23:46 Check angles
07:23:46 SkyScan query
07:23:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.745<-14983  Statuses=0008 0009
07:23:47 Msec=750  True Az=112.995  Ze=-44.745  Az status=0008  Ze status=0009
07:23:47 Check angles
07:23:47 SkyScan query
07:23:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.685<-16379  Statuses=0008 0009
07:23:47 Msec=1500  True Az=112.995  Ze=-65.685  Az status=0008  Ze status=0009
07:23:47 Check angles
07:23:47 SkyScan query
07:23:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.625<-17775  Statuses=0008 0009
07:23:48 Msec=2250  True Az=112.995  Ze=-86.625  Az status=0008  Ze status=0009
07:23:48 Check angles
07:23:48 SkyScan query
07:23:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.58<-19172  Statuses=0008 0009
07:23:49 Msec=3000  True Az=112.995  Ze=-107.58  Az status=0008  Ze status=0009
[UTC 2019-3-9  07:23:49]
07:23:49 Check angles
07:23:49 SkyScan query
07:23:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.535<-20569  Statuses=0008 0009
07:23:50 Msec=3750  True Az=112.995  Ze=-128.535  Az status=0008  Ze status=0009
07:23:50 Check angles
07:23:50 SkyScan query
07:23:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.94<-21996  Statuses=0008 0009
07:23:50 Msec=4500  True Az=112.995  Ze=-149.94  Az status=0008  Ze status=0009
07:23:50 Check angles
07:23:50 SkyScan query
07:23:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.82<-23388  Statuses=0008 0009
07:23:51 Msec=5250  True Az=112.995  Ze=-170.82  Az status=0008  Ze status=0009
07:23:51 Check angles
07:23:51 SkyScan query
07:23:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:23:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:23:52 Message to Master queued w/err=0: serial=186030 error=0
07:23:57 Received message from Master: op=Filter serial=186031
07:23:57 Color wheel filter change from 0 to 0
07:23:57 FLIGetFilterPos err=0  currentPosition=0
07:23:57 FLIGetStepsRemaining err=0  RemainingSteps=0
07:23:57 Filter is already there-color wheel unchanged
07:23:57 Received message from Master: op=Shutter serial=186032
07:23:57 Shutter LASER open
07:23:57 Received message from Camera: op=State serial=186034
07:23:57 GetSingleValue result=40  Value=cccccccc
07:23:57 SkyScan query
07:23:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:23:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:23:58 Parameters OK
07:23:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:23:58 Set A/D data flow result=40
07:23:58 Set A/D channel type result=40
07:23:58 Set A/D encoding result=40
07:23:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:23:58 Set channel filter=0.000000e+000  result=40
07:23:58 Config A/D  Result=40
07:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:23:58 Get A/D filter: -9.255963e+061  result=40
07:23:58 Get A/D value=-858993460  result=40
07:23:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:23:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:23:58 Parameters OK
07:23:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:23:58 Set A/D data flow result=40
07:23:58 Set A/D channel type result=40
07:23:58 Set A/D encoding result=40
07:23:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:23:58 Set channel filter=0.000000e+000  result=40
07:23:58 Config A/D  Result=40
07:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:23:58 Get A/D filter: -9.255963e+061  result=40
07:23:58 Get A/D value=-858993460  result=40
07:23:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:23:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:23:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:23:58 Aux=
07:23:58 Message to Camera, serial 186034 queued
07:24:06 Received message from Master: op=Shutter serial=186044
07:24:06 Shutter LASER close
07:24:07 Received message from Master: op=PointingHead serial=186048
07:24:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:24:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:24:07 Point started: ret=0
07:24:07 point_skyscan result=0
07:24:08 Check angles
07:24:08 SkyScan query
07:24:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.95<-21530  Statuses=0008 0009
07:24:08 Msec=0  True Az=112.995  Ze=-142.95  Az status=0008  Ze status=0009
07:24:08 Check angles
07:24:08 SkyScan query
07:24:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.575<-20105  Statuses=0008 0009
07:24:09 Msec=750  True Az=112.995  Ze=-121.575  Az status=0008  Ze status=0009
07:24:09 Check angles
07:24:09 SkyScan query
07:24:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.62<-18708  Statuses=0008 0009
07:24:10 Msec=1500  True Az=112.995  Ze=-100.62  Az status=0008  Ze status=0009
07:24:10 Check angles
07:24:10 SkyScan query
07:24:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
07:24:11 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
07:24:11 Check angles
07:24:11 SkyScan query
07:24:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.71<-15914  Statuses=0008 0009
07:24:11 Msec=3000  True Az=112.995  Ze=-58.71  Az status=0008  Ze status=0009
07:24:11 Check angles
07:24:11 SkyScan query
07:24:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.755<-14517  Statuses=0008 0009
07:24:12 Msec=3750  True Az=112.995  Ze=-37.755  Az status=0008  Ze status=0009
07:24:12 Check angles
07:24:12 SkyScan query
07:24:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.8<-13120  Statuses=0008 0009
07:24:13 Msec=4500  True Az=112.995  Ze=-16.8  Az status=0008  Ze status=0009
07:24:13 Check angles
07:24:13 SkyScan query
07:24:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.14<-11724  Statuses=0008 0009
07:24:14 Msec=5250  True Az=112.995  Ze=4.14  Az status=0008  Ze status=0009
07:24:14 Check angles
07:24:14 SkyScan query
07:24:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:24:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:24:14 Message to Master queued w/err=0: serial=186048 error=0
07:24:19 Received message from Master: op=Filter serial=186049
07:24:19 Color wheel filter change from 0 to 0
07:24:19 FLIGetFilterPos err=0  currentPosition=0
07:24:19 FLIGetStepsRemaining err=0  RemainingSteps=0
07:24:19 Filter is already there-color wheel unchanged
07:24:19 Received message from Master: op=Shutter serial=186050
07:24:19 Shutter LASER close
07:24:20 Received message from Camera: op=State serial=186052
07:24:20 GetSingleValue result=40  Value=cccccccc
07:24:20 SkyScan query
07:24:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:24:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:24:20 Parameters OK
07:24:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:24:20 Set A/D data flow result=40
07:24:20 Set A/D channel type result=40
07:24:20 Set A/D encoding result=40
07:24:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:24:20 Set channel filter=0.000000e+000  result=40
07:24:20 Config A/D  Result=40
07:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:24:20 Get A/D filter: -9.255963e+061  result=40
07:24:20 Get A/D value=-858993460  result=40
07:24:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:24:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:24:20 Parameters OK
07:24:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:24:20 Set A/D data flow result=40
07:24:20 Set A/D channel type result=40
07:24:20 Set A/D encoding result=40
07:24:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:24:20 Set channel filter=0.000000e+000  result=40
07:24:20 Config A/D  Result=40
07:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:24:20 Get A/D filter: -9.255963e+061  result=40
07:24:20 Get A/D value=-858993460  result=40
07:24:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:24:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:24:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:24:20 Aux=
07:24:20 Message to Camera, serial 186052 queued
07:24:57 Received message from Master: op=PointingHead serial=186065
07:24:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:24:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:24:57 Point started: ret=0
07:24:57 point_skyscan result=0
07:24:58 Check angles
07:24:58 SkyScan query
07:24:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:24:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:24:59 Message to Master queued w/err=0: serial=186065 error=0
07:25:04 Received message from Master: op=Filter serial=186066
07:25:04 Color wheel filter change from 0 to 0
07:25:04 FLIGetFilterPos err=0  currentPosition=0
07:25:04 FLIGetStepsRemaining err=0  RemainingSteps=0
07:25:04 Filter is already there-color wheel unchanged
07:25:04 Received message from Master: op=Shutter serial=186067
07:25:04 Shutter LASER close
07:25:04 Received message from Camera: op=State serial=186069
07:25:04 GetSingleValue result=40  Value=cccccccc
07:25:04 SkyScan query
07:25:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:25:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:25:04 Parameters OK
07:25:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:25:04 Set A/D data flow result=40
07:25:04 Set A/D channel type result=40
07:25:04 Set A/D encoding result=40
07:25:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:25:04 Set channel filter=0.000000e+000  result=40
07:25:04 Config A/D  Result=40
07:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:25:04 Get A/D filter: -9.255963e+061  result=40
07:25:04 Get A/D value=-858993460  result=40
07:25:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:25:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:25:04 Parameters OK
07:25:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:25:04 Set A/D data flow result=40
07:25:04 Set A/D channel type result=40
07:25:04 Set A/D encoding result=40
07:25:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:25:04 Set channel filter=0.000000e+000  result=40
07:25:04 Config A/D  Result=40
07:25:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:25:04 Get A/D filter: -9.255963e+061  result=40
07:25:04 Get A/D value=-858993460  result=40
07:25:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:25:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:25:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:25:04 Aux=
07:25:04 Message to Camera, serial 186069 queued
07:25:41 Received message from Master: op=PointingHead serial=186082
07:25:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:25:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:25:42 Point started: ret=0
07:25:42 point_skyscan result=0
07:25:42 Check angles
07:25:42 SkyScan query
07:25:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:25:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:25:43 Message to Master queued w/err=0: serial=186082 error=0
07:25:48 Received message from Master: op=Filter serial=186083
07:25:48 Color wheel filter change from 0 to 0
07:25:48 FLIGetFilterPos err=0  currentPosition=0
07:25:48 FLIGetStepsRemaining err=0  RemainingSteps=0
07:25:48 Filter is already there-color wheel unchanged
07:25:48 Received message from Master: op=Shutter serial=186084
07:25:48 Shutter LASER close
07:25:48 Received message from Camera: op=State serial=186086
07:25:48 GetSingleValue result=40  Value=cccccccc
07:25:48 SkyScan query
07:25:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:25:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:25:49 Parameters OK
07:25:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:25:49 Set A/D data flow result=40
07:25:49 Set A/D channel type result=40
07:25:49 Set A/D encoding result=40
07:25:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:25:49 Set channel filter=0.000000e+000  result=40
07:25:49 Config A/D  Result=40
07:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:25:49 Get A/D filter: -9.255963e+061  result=40
07:25:49 Get A/D value=-858993460  result=40
07:25:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:25:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:25:49 Parameters OK
07:25:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:25:49 Set A/D data flow result=40
07:25:49 Set A/D channel type result=40
07:25:49 Set A/D encoding result=40
07:25:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:25:49 Set channel filter=0.000000e+000  result=40
07:25:49 Config A/D  Result=40
07:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:25:49 Get A/D filter: -9.255963e+061  result=40
07:25:49 Get A/D value=-858993460  result=40
07:25:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:25:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:25:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:25:49 Aux=
07:25:49 Message to Camera, serial 186086 queued
07:26:26 Received message from Master: op=PointingHead serial=186099
07:26:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:26:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:26:26 Point started: ret=0
07:26:26 point_skyscan result=0
07:26:27 Check angles
07:26:27 SkyScan query
07:26:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:26:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:26:27 Message to Master queued w/err=0: serial=186099 error=0
07:26:32 Received message from Master: op=Filter serial=186100
07:26:32 Color wheel filter change from 0 to 0
07:26:32 FLIGetFilterPos err=0  currentPosition=0
07:26:32 FLIGetStepsRemaining err=0  RemainingSteps=0
07:26:32 Filter is already there-color wheel unchanged
07:26:33 Received message from Master: op=Shutter serial=186101
07:26:33 Shutter LASER close
07:26:33 Received message from Camera: op=State serial=186103
07:26:33 GetSingleValue result=40  Value=cccccccc
07:26:33 SkyScan query
07:26:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:26:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:26:33 Parameters OK
07:26:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:26:33 Set A/D data flow result=40
07:26:33 Set A/D channel type result=40
07:26:33 Set A/D encoding result=40
07:26:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:26:33 Set channel filter=0.000000e+000  result=40
07:26:33 Config A/D  Result=40
07:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:26:33 Get A/D filter: -9.255963e+061  result=40
07:26:33 Get A/D value=-858993460  result=40
07:26:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:26:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:26:33 Parameters OK
07:26:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:26:33 Set A/D data flow result=40
07:26:33 Set A/D channel type result=40
07:26:33 Set A/D encoding result=40
07:26:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:26:33 Set channel filter=0.000000e+000  result=40
07:26:33 Config A/D  Result=40
07:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:26:33 Get A/D filter: -9.255963e+061  result=40
07:26:33 Get A/D value=-858993460  result=40
07:26:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:26:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:26:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:26:33 Aux=
07:26:33 Message to Camera, serial 186103 queued
07:27:10 Received message from Master: op=PointingHead serial=186116
07:27:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:27:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:27:10 Point started: ret=0
07:27:10 point_skyscan result=0
07:27:11 Check angles
07:27:11 SkyScan query
07:27:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
07:27:12 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
07:27:12 Check angles
07:27:12 SkyScan query
07:27:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.55<-14970  Statuses=0008 0009
07:27:12 Msec=750  True Az=112.995  Ze=-44.55  Az status=0008  Ze status=0009
07:27:13 Check angles
07:27:13 SkyScan query
07:27:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.49<-16366  Statuses=0008 0009
07:27:13 Msec=1500  True Az=112.995  Ze=-65.49  Az status=0008  Ze status=0009
07:27:13 Check angles
07:27:13 SkyScan query
07:27:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.475<-17765  Statuses=0008 0009
07:27:14 Msec=2250  True Az=112.995  Ze=-86.475  Az status=0008  Ze status=0009
07:27:14 Check angles
07:27:14 SkyScan query
07:27:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.415<-19161  Statuses=0008 0009
07:27:15 Msec=3000  True Az=112.995  Ze=-107.415  Az status=0008  Ze status=0009
07:27:15 Check angles
07:27:15 SkyScan query
07:27:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.355<-20557  Statuses=0008 0009
07:27:15 Msec=3750  True Az=112.995  Ze=-128.355  Az status=0008  Ze status=0009
07:27:16 Check angles
07:27:16 SkyScan query
07:27:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.325<-21955  Statuses=0008 0009
07:27:16 Msec=4500  True Az=112.995  Ze=-149.325  Az status=0008  Ze status=0009
07:27:16 Check angles
07:27:16 SkyScan query
07:27:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.265<-23351  Statuses=0008 0009
07:27:17 Msec=5250  True Az=112.995  Ze=-170.265  Az status=0008  Ze status=0009
07:27:17 Check angles
07:27:17 SkyScan query
07:27:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:27:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:27:18 Message to Master queued w/err=0: serial=186116 error=0
07:27:23 Received message from Master: op=Filter serial=186117
07:27:23 Color wheel filter change from 0 to 0
07:27:23 FLIGetFilterPos err=0  currentPosition=0
07:27:23 FLIGetStepsRemaining err=0  RemainingSteps=0
07:27:23 Filter is already there-color wheel unchanged
07:27:23 Received message from Master: op=Shutter serial=186118
07:27:23 Shutter LASER open
07:27:23 Received message from Camera: op=State serial=186120
07:27:23 GetSingleValue result=40  Value=cccccccc
07:27:23 SkyScan query
07:27:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:27:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:24 Parameters OK
07:27:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:24 Set A/D data flow result=40
07:27:24 Set A/D channel type result=40
07:27:24 Set A/D encoding result=40
07:27:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:24 Set channel filter=0.000000e+000  result=40
07:27:24 Config A/D  Result=40
07:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:24 Get A/D filter: -9.255963e+061  result=40
07:27:24 Get A/D value=-858993460  result=40
07:27:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:24 Parameters OK
07:27:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:24 Set A/D data flow result=40
07:27:24 Set A/D channel type result=40
07:27:24 Set A/D encoding result=40
07:27:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:24 Set channel filter=0.000000e+000  result=40
07:27:24 Config A/D  Result=40
07:27:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:24 Get A/D filter: -9.255963e+061  result=40
07:27:24 Get A/D value=-858993460  result=40
07:27:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:27:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:27:24 Aux=
07:27:24 Message to Camera, serial 186120 queued
07:27:32 Received message from Master: op=Shutter serial=186130
07:27:32 Shutter LASER close
07:27:33 Received message from Master: op=PointingHead serial=186134
07:27:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:27:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:27:33 Point started: ret=0
07:27:33 point_skyscan result=0
07:27:34 Check angles
07:27:34 SkyScan query
07:27:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.295<-21553  Statuses=0008 0009
07:27:34 Msec=0  True Az=112.995  Ze=-143.295  Az status=0008  Ze status=0009
07:27:34 Check angles
07:27:34 SkyScan query
07:27:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.34<-20156  Statuses=0008 0009
07:27:35 Msec=750  True Az=112.995  Ze=-122.34  Az status=0008  Ze status=0009
07:27:35 Check angles
07:27:35 SkyScan query
07:27:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.385<-18759  Statuses=0008 0009
07:27:36 Msec=1500  True Az=112.995  Ze=-101.385  Az status=0008  Ze status=0009
07:27:36 Check angles
07:27:36 SkyScan query
07:27:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.995<-17333  Statuses=0008 0009
07:27:36 Msec=2250  True Az=112.995  Ze=-79.995  Az status=0008  Ze status=0009
07:27:37 Check angles
07:27:37 SkyScan query
07:27:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
07:27:37 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
07:27:37 Check angles
07:27:37 SkyScan query
07:27:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.635<-14509  Statuses=0008 0009
07:27:38 Msec=3750  True Az=112.995  Ze=-37.635  Az status=0008  Ze status=0009
07:27:38 Check angles
07:27:38 SkyScan query
07:27:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.68<-13112  Statuses=0008 0009
07:27:39 Msec=4500  True Az=112.995  Ze=-16.68  Az status=0008  Ze status=0009
07:27:39 Check angles
07:27:39 SkyScan query
07:27:40 SkyScan query done: ret=0  az=112.995<-7533  ze=4.23<-11718  Statuses=0008 0009
07:27:40 Msec=5250  True Az=112.995  Ze=4.23  Az status=0008  Ze status=0009
07:27:40 Check angles
07:27:40 SkyScan query
07:27:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:27:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:27:40 Message to Master queued w/err=0: serial=186134 error=0
07:27:45 Received message from Master: op=Filter serial=186135
07:27:45 Color wheel filter change from 0 to 0
07:27:45 FLIGetFilterPos err=0  currentPosition=0
07:27:45 FLIGetStepsRemaining err=0  RemainingSteps=0
07:27:45 Filter is already there-color wheel unchanged
07:27:45 Received message from Master: op=Shutter serial=186136
07:27:45 Shutter LASER close
07:27:46 Received message from Camera: op=State serial=186138
07:27:46 GetSingleValue result=40  Value=cccccccc
07:27:46 SkyScan query
07:27:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:27:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:46 Parameters OK
07:27:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:46 Set A/D data flow result=40
07:27:46 Set A/D channel type result=40
07:27:46 Set A/D encoding result=40
07:27:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:46 Set channel filter=0.000000e+000  result=40
07:27:46 Config A/D  Result=40
07:27:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:46 Get A/D filter: -9.255963e+061  result=40
07:27:46 Get A/D value=-858993460  result=40
07:27:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:27:46 Parameters OK
07:27:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:27:46 Set A/D data flow result=40
07:27:46 Set A/D channel type result=40
07:27:46 Set A/D encoding result=40
07:27:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:27:46 Set channel filter=0.000000e+000  result=40
07:27:46 Config A/D  Result=40
07:27:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:27:46 Get A/D filter: -9.255963e+061  result=40
07:27:46 Get A/D value=-858993460  result=40
07:27:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:27:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:27:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:27:46 Aux=
07:27:46 Message to Camera, serial 186138 queued
07:28:23 Received message from Master: op=PointingHead serial=186151
07:28:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:28:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:28:23 Point started: ret=0
07:28:23 point_skyscan result=0
07:28:24 Check angles
07:28:24 SkyScan query
07:28:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:28:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:28:25 Message to Master queued w/err=0: serial=186151 error=0
07:28:30 Received message from Master: op=Filter serial=186152
07:28:30 Color wheel filter change from 0 to 0
07:28:30 FLIGetFilterPos err=0  currentPosition=0
07:28:30 FLIGetStepsRemaining err=0  RemainingSteps=0
07:28:30 Filter is already there-color wheel unchanged
07:28:30 Received message from Master: op=Shutter serial=186153
07:28:30 Shutter LASER close
07:28:30 Received message from Camera: op=State serial=186155
07:28:30 GetSingleValue result=40  Value=cccccccc
07:28:30 SkyScan query
07:28:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:28:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:28:30 Parameters OK
07:28:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:28:30 Set A/D data flow result=40
07:28:30 Set A/D channel type result=40
07:28:30 Set A/D encoding result=40
07:28:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:28:30 Set channel filter=0.000000e+000  result=40
07:28:30 Config A/D  Result=40
07:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:28:30 Get A/D filter: -9.255963e+061  result=40
07:28:30 Get A/D value=-858993460  result=40
07:28:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:28:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:28:30 Parameters OK
07:28:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:28:30 Set A/D data flow result=40
07:28:30 Set A/D channel type result=40
07:28:30 Set A/D encoding result=40
07:28:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:28:30 Set channel filter=0.000000e+000  result=40
07:28:30 Config A/D  Result=40
07:28:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:28:30 Get A/D filter: -9.255963e+061  result=40
07:28:30 Get A/D value=-858993460  result=40
07:28:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:28:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:28:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:28:30 Aux=
07:28:30 Message to Camera, serial 186155 queued
07:29:07 Received message from Master: op=PointingHead serial=186168
07:29:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:29:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:29:08 Point started: ret=0
07:29:08 point_skyscan result=0
07:29:08 Check angles
07:29:08 SkyScan query
07:29:09 SkyScan query done: ret=0  az=136.32<-9088  ze=-6.51<-12434  Statuses=0009 0008
07:29:09 Msec=0  True Az=136.32  Ze=-6.51  Az status=0009  Ze status=0008
07:29:09 Check angles
07:29:09 SkyScan query
07:29:10 SkyScan query done: ret=0  az=153.75<-10250  ze=-6.495<-12433  Statuses=0009 0008
07:29:10 Msec=750  True Az=153.75  Ze=-6.495  Az status=0009  Ze status=0008
07:29:10 Check angles
07:29:10 SkyScan query
07:29:11 SkyScan query done: ret=0  az=171.15<-11410  ze=-6.495<-12433  Statuses=0009 0008
07:29:11 Msec=1500  True Az=171.15  Ze=-6.495  Az status=0009  Ze status=0008
07:29:11 Check angles
07:29:11 SkyScan query
07:29:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:29:11 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:29:11 Message to Master queued w/err=0: serial=186168 error=0
07:29:16 Received message from Master: op=Filter serial=186169
07:29:16 Color wheel filter change from 0 to 0
07:29:16 FLIGetFilterPos err=0  currentPosition=0
07:29:16 FLIGetStepsRemaining err=0  RemainingSteps=0
07:29:16 Filter is already there-color wheel unchanged
07:29:16 Received message from Master: op=Shutter serial=186170
07:29:16 Shutter LASER close
07:29:16 Received message from Camera: op=State serial=186172
07:29:16 GetSingleValue result=40  Value=cccccccc
07:29:16 SkyScan query
07:29:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:29:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:29:17 Parameters OK
07:29:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:29:17 Set A/D data flow result=40
07:29:17 Set A/D channel type result=40
07:29:17 Set A/D encoding result=40
07:29:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:29:17 Set channel filter=0.000000e+000  result=40
07:29:17 Config A/D  Result=40
07:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:29:17 Get A/D filter: -9.255963e+061  result=40
07:29:17 Get A/D value=-858993460  result=40
07:29:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:29:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:29:17 Parameters OK
07:29:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:29:17 Set A/D data flow result=40
07:29:17 Set A/D channel type result=40
07:29:17 Set A/D encoding result=40
07:29:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:29:17 Set channel filter=0.000000e+000  result=40
07:29:17 Config A/D  Result=40
07:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:29:17 Get A/D filter: -9.255963e+061  result=40
07:29:17 Get A/D value=-858993460  result=40
07:29:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:29:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:29:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:29:17 Aux=
07:29:17 Message to Camera, serial 186172 queued
07:29:54 Received message from Master: op=PointingHead serial=186185
07:29:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:29:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:29:54 Point started: ret=0
07:29:54 point_skyscan result=0
07:29:55 Check angles
07:29:55 SkyScan query
07:29:56 SkyScan query done: ret=0  az=152.775<-10185  ze=6.51<-11566  Statuses=0009 0008
07:29:56 Msec=0  True Az=152.775  Ze=6.51  Az status=0009  Ze status=0008
07:29:56 Check angles
07:29:56 SkyScan query
07:29:56 SkyScan query done: ret=0  az=135.3<-9020  ze=6.495<-11567  Statuses=0009 0008
07:29:56 Msec=750  True Az=135.3  Ze=6.495  Az status=0009  Ze status=0008
07:29:57 Check angles
07:29:57 SkyScan query
07:29:57 SkyScan query done: ret=0  az=117.885<-7859  ze=6.495<-11567  Statuses=0009 0008
07:29:57 Msec=1500  True Az=117.885  Ze=6.495  Az status=0009  Ze status=0008
07:29:57 Check angles
07:29:57 SkyScan query
07:29:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:29:58 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:29:58 Message to Master queued w/err=0: serial=186185 error=0
07:30:03 Received message from Master: op=Filter serial=186186
07:30:03 Color wheel filter change from 0 to 0
07:30:03 FLIGetFilterPos err=0  currentPosition=0
07:30:03 FLIGetStepsRemaining err=0  RemainingSteps=0
07:30:03 Filter is already there-color wheel unchanged
07:30:03 Received message from Master: op=Shutter serial=186187
07:30:03 Shutter LASER close
07:30:03 Received message from Camera: op=State serial=186189
07:30:03 GetSingleValue result=40  Value=cccccccc
07:30:03 SkyScan query
07:30:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:30:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:30:04 Parameters OK
07:30:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:30:04 Set A/D data flow result=40
07:30:04 Set A/D channel type result=40
07:30:04 Set A/D encoding result=40
07:30:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:30:04 Set channel filter=0.000000e+000  result=40
07:30:04 Config A/D  Result=40
07:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:30:04 Get A/D filter: -9.255963e+061  result=40
07:30:04 Get A/D value=-858993460  result=40
07:30:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:30:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:30:04 Parameters OK
07:30:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:30:04 Set A/D data flow result=40
07:30:04 Set A/D channel type result=40
07:30:04 Set A/D encoding result=40
07:30:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:30:04 Set channel filter=0.000000e+000  result=40
07:30:04 Config A/D  Result=40
07:30:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:30:04 Get A/D filter: -9.255963e+061  result=40
07:30:04 Get A/D value=-858993460  result=40
07:30:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:30:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:30:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:30:04 Aux=
07:30:04 Message to Camera, serial 186189 queued
07:30:40 Received message from Master: op=PointingHead serial=186202
07:30:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:30:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:30:41 Point started: ret=0
07:30:41 point_skyscan result=0
07:30:42 Check angles
07:30:42 SkyScan query
07:30:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
07:30:42 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
07:30:42 Check angles
07:30:42 SkyScan query
07:30:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.505<-14967  Statuses=0008 0009
07:30:43 Msec=750  True Az=112.995  Ze=-44.505  Az status=0008  Ze status=0009
07:30:43 Check angles
07:30:43 SkyScan query
07:30:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.46<-16364  Statuses=0008 0009
07:30:44 Msec=1500  True Az=112.995  Ze=-65.46  Az status=0008  Ze status=0009
07:30:44 Check angles
07:30:44 SkyScan query
07:30:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.415<-17761  Statuses=0008 0009
07:30:44 Msec=2250  True Az=112.995  Ze=-86.415  Az status=0008  Ze status=0009
07:30:45 Check angles
07:30:45 SkyScan query
07:30:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
07:30:45 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
07:30:45 Check angles
07:30:45 SkyScan query
07:30:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.73<-20582  Statuses=0008 0009
07:30:46 Msec=3750  True Az=112.995  Ze=-128.73  Az status=0008  Ze status=0009
07:30:46 Check angles
07:30:46 SkyScan query
07:30:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
07:30:47 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
07:30:47 Check angles
07:30:47 SkyScan query
07:30:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
07:30:47 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
07:30:48 Check angles
07:30:48 SkyScan query
07:30:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:30:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:30:48 Message to Master queued w/err=0: serial=186202 error=0
07:30:53 Received message from Master: op=Filter serial=186203
07:30:53 Color wheel filter change from 0 to 0
07:30:53 FLIGetFilterPos err=0  currentPosition=0
07:30:53 FLIGetStepsRemaining err=0  RemainingSteps=0
07:30:53 Filter is already there-color wheel unchanged
07:30:53 Received message from Master: op=Shutter serial=186204
07:30:53 Shutter LASER open
07:30:54 Received message from Camera: op=State serial=186206
07:30:54 GetSingleValue result=40  Value=cccccccc
07:30:54 SkyScan query
07:30:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:30:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:30:54 Parameters OK
07:30:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:30:54 Set A/D data flow result=40
07:30:54 Set A/D channel type result=40
07:30:54 Set A/D encoding result=40
07:30:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:30:54 Set channel filter=0.000000e+000  result=40
07:30:54 Config A/D  Result=40
07:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:30:54 Get A/D filter: -9.255963e+061  result=40
07:30:54 Get A/D value=-858993460  result=40
07:30:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:30:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:30:54 Parameters OK
07:30:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:30:54 Set A/D data flow result=40
07:30:54 Set A/D channel type result=40
07:30:54 Set A/D encoding result=40
07:30:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:30:54 Set channel filter=0.000000e+000  result=40
07:30:54 Config A/D  Result=40
07:30:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:30:54 Get A/D filter: -9.255963e+061  result=40
07:30:54 Get A/D value=-858993460  result=40
07:30:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:30:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:30:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:30:54 Aux=
07:30:54 Message to Camera, serial 186206 queued
07:31:03 Received message from Master: op=Shutter serial=186216
07:31:03 Shutter LASER close
07:31:03 Received message from Master: op=PointingHead serial=186220
07:31:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:31:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:31:03 Point started: ret=0
07:31:03 point_skyscan result=0
07:31:04 Check angles
07:31:04 SkyScan query
07:31:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
07:31:05 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
07:31:05 Check angles
07:31:05 SkyScan query
07:31:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.07<-20138  Statuses=0008 0009
07:31:05 Msec=750  True Az=112.995  Ze=-122.07  Az status=0008  Ze status=0009
07:31:06 Check angles
07:31:06 SkyScan query
07:31:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.695<-18713  Statuses=0008 0009
07:31:06 Msec=1500  True Az=112.995  Ze=-100.695  Az status=0008  Ze status=0009
07:31:06 Check angles
07:31:06 SkyScan query
07:31:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.74<-17316  Statuses=0008 0009
07:31:07 Msec=2250  True Az=112.995  Ze=-79.74  Az status=0008  Ze status=0009
07:31:07 Check angles
07:31:07 SkyScan query
07:31:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.8<-15920  Statuses=0008 0009
07:31:08 Msec=3000  True Az=112.995  Ze=-58.8  Az status=0008  Ze status=0009
07:31:08 Check angles
07:31:08 SkyScan query
07:31:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.83<-14522  Statuses=0008 0009
07:31:08 Msec=3750  True Az=112.995  Ze=-37.83  Az status=0008  Ze status=0009
07:31:09 Check angles
07:31:09 SkyScan query
07:31:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
07:31:09 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
07:31:09 Check angles
07:31:09 SkyScan query
07:31:10 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
07:31:10 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
07:31:10 Check angles
07:31:10 SkyScan query
07:31:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:31:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:31:11 Message to Master queued w/err=0: serial=186220 error=0
07:31:16 Received message from Master: op=Filter serial=186221
07:31:16 Color wheel filter change from 0 to 0
07:31:16 FLIGetFilterPos err=0  currentPosition=0
07:31:16 FLIGetStepsRemaining err=0  RemainingSteps=0
07:31:16 Filter is already there-color wheel unchanged
07:31:16 Received message from Master: op=Shutter serial=186222
07:31:16 Shutter LASER close
07:31:16 Received message from Camera: op=State serial=186224
07:31:16 GetSingleValue result=40  Value=cccccccc
07:31:16 SkyScan query
07:31:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:31:17 Parameters OK
07:31:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:31:17 Set A/D data flow result=40
07:31:17 Set A/D channel type result=40
07:31:17 Set A/D encoding result=40
07:31:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:31:17 Set channel filter=0.000000e+000  result=40
07:31:17 Config A/D  Result=40
07:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:31:17 Get A/D filter: -9.255963e+061  result=40
07:31:17 Get A/D value=-858993460  result=40
07:31:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:31:17 Parameters OK
07:31:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:31:17 Set A/D data flow result=40
07:31:17 Set A/D channel type result=40
07:31:17 Set A/D encoding result=40
07:31:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:31:17 Set channel filter=0.000000e+000  result=40
07:31:17 Config A/D  Result=40
07:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:31:17 Get A/D filter: -9.255963e+061  result=40
07:31:17 Get A/D value=-858993460  result=40
07:31:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:31:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:31:17 Aux=
07:31:17 Message to Camera, serial 186224 queued
07:31:53 Received message from Master: op=PointingHead serial=186237
07:31:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:31:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:31:54 Point started: ret=0
07:31:54 point_skyscan result=0
07:31:55 Check angles
07:31:55 SkyScan query
07:31:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:31:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:31:55 Message to Master queued w/err=0: serial=186237 error=0
07:32:00 Received message from Master: op=Filter serial=186238
07:32:00 Color wheel filter change from 0 to 0
07:32:00 FLIGetFilterPos err=0  currentPosition=0
07:32:00 FLIGetStepsRemaining err=0  RemainingSteps=0
07:32:00 Filter is already there-color wheel unchanged
07:32:00 Received message from Master: op=Shutter serial=186239
07:32:00 Shutter LASER close
07:32:00 Received message from Camera: op=State serial=186241
07:32:00 GetSingleValue result=40  Value=cccccccc
07:32:00 SkyScan query
07:32:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:32:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:32:01 Parameters OK
07:32:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:32:01 Set A/D data flow result=40
07:32:01 Set A/D channel type result=40
07:32:01 Set A/D encoding result=40
07:32:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:32:01 Set channel filter=0.000000e+000  result=40
07:32:01 Config A/D  Result=40
07:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:32:01 Get A/D filter: -9.255963e+061  result=40
07:32:01 Get A/D value=-858993460  result=40
07:32:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:32:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:32:01 Parameters OK
07:32:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:32:01 Set A/D data flow result=40
07:32:01 Set A/D channel type result=40
07:32:01 Set A/D encoding result=40
07:32:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:32:01 Set channel filter=0.000000e+000  result=40
07:32:01 Config A/D  Result=40
07:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:32:01 Get A/D filter: -9.255963e+061  result=40
07:32:01 Get A/D value=-858993460  result=40
07:32:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:32:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:32:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:32:01 Aux=
07:32:01 Message to Camera, serial 186241 queued
07:32:37 Received message from Master: op=PointingHead serial=186253
07:32:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:32:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:32:37 Point started: ret=0
07:32:37 point_skyscan result=0
07:32:38 Check angles
07:32:38 SkyScan query
07:32:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:32:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:32:38 Message to Master queued w/err=0: serial=186253 error=0
07:32:43 Received message from Master: op=Filter serial=186254
07:32:43 Color wheel filter change from 0 to 0
07:32:43 FLIGetFilterPos err=0  currentPosition=0
07:32:43 FLIGetStepsRemaining err=0  RemainingSteps=0
07:32:43 Filter is already there-color wheel unchanged
07:32:44 Received message from Master: op=Shutter serial=186255
07:32:44 Shutter LASER close
07:32:44 Received message from Camera: op=State serial=186257
07:32:44 GetSingleValue result=40  Value=cccccccc
07:32:44 SkyScan query
07:32:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:32:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:32:44 Parameters OK
07:32:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:32:44 Set A/D data flow result=40
07:32:44 Set A/D channel type result=40
07:32:44 Set A/D encoding result=40
07:32:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:32:44 Set channel filter=0.000000e+000  result=40
07:32:44 Config A/D  Result=40
07:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:32:44 Get A/D filter: -9.255963e+061  result=40
07:32:44 Get A/D value=-858993460  result=40
07:32:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:32:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:32:44 Parameters OK
07:32:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:32:44 Set A/D data flow result=40
07:32:44 Set A/D channel type result=40
07:32:44 Set A/D encoding result=40
07:32:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:32:44 Set channel filter=0.000000e+000  result=40
07:32:44 Config A/D  Result=40
07:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:32:44 Get A/D filter: -9.255963e+061  result=40
07:32:44 Get A/D value=-858993460  result=40
07:32:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:32:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:32:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:32:44 Aux=
07:32:44 Message to Camera, serial 186257 queued
07:33:21 Received message from Master: op=PointingHead serial=186270
07:33:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:33:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:33:21 Point started: ret=0
07:33:21 point_skyscan result=0
07:33:22 Check angles
07:33:22 SkyScan query
07:33:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:33:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:33:23 Message to Master queued w/err=0: serial=186270 error=0
07:33:28 Received message from Master: op=Filter serial=186271
07:33:28 Color wheel filter change from 0 to 0
07:33:28 FLIGetFilterPos err=0  currentPosition=0
07:33:28 FLIGetStepsRemaining err=0  RemainingSteps=0
07:33:28 Filter is already there-color wheel unchanged
07:33:28 Received message from Master: op=Shutter serial=186272
07:33:28 Shutter LASER close
07:33:28 Received message from Camera: op=State serial=186274
07:33:28 GetSingleValue result=40  Value=cccccccc
07:33:28 SkyScan query
07:33:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:33:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:33:29 Parameters OK
07:33:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:33:29 Set A/D data flow result=40
07:33:29 Set A/D channel type result=40
07:33:29 Set A/D encoding result=40
07:33:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:33:29 Set channel filter=0.000000e+000  result=40
07:33:29 Config A/D  Result=40
07:33:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:33:29 Get A/D filter: -9.255963e+061  result=40
07:33:29 Get A/D value=-858993460  result=40
07:33:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:33:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:33:29 Parameters OK
07:33:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:33:29 Set A/D data flow result=40
07:33:29 Set A/D channel type result=40
07:33:29 Set A/D encoding result=40
07:33:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:33:29 Set channel filter=0.000000e+000  result=40
07:33:29 Config A/D  Result=40
07:33:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:33:29 Get A/D filter: -9.255963e+061  result=40
07:33:29 Get A/D value=-858993460  result=40
07:33:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:33:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:33:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:33:29 Aux=
07:33:29 Message to Camera, serial 186274 queued
07:33:36 Received message from Master: op=Identify serial=186275
07:34:05 Received message from Master: op=PointingHead serial=186290
07:34:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:34:05 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:34:06 Point started: ret=0
07:34:06 point_skyscan result=0
07:34:07 Check angles
07:34:07 SkyScan query
07:34:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
07:34:07 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
07:34:07 Check angles
07:34:07 SkyScan query
07:34:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.805<-14987  Statuses=0008 0009
07:34:08 Msec=750  True Az=112.995  Ze=-44.805  Az status=0008  Ze status=0009
07:34:08 Check angles
07:34:08 SkyScan query
07:34:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.745<-16383  Statuses=0008 0009
07:34:09 Msec=1500  True Az=112.995  Ze=-65.745  Az status=0008  Ze status=0009
07:34:09 Check angles
07:34:09 SkyScan query
07:34:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.7<-17780  Statuses=0008 0009
07:34:09 Msec=2250  True Az=112.995  Ze=-86.7  Az status=0008  Ze status=0009
07:34:10 Check angles
07:34:10 SkyScan query
07:34:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.655<-19177  Statuses=0008 0009
07:34:10 Msec=3000  True Az=112.995  Ze=-107.655  Az status=0008  Ze status=0009
07:34:10 Check angles
07:34:10 SkyScan query
07:34:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.595<-20573  Statuses=0008 0009
07:34:11 Msec=3750  True Az=112.995  Ze=-128.595  Az status=0008  Ze status=0009
07:34:11 Check angles
07:34:11 SkyScan query
07:34:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.565<-21971  Statuses=0008 0009
07:34:12 Msec=4500  True Az=112.995  Ze=-149.565  Az status=0008  Ze status=0009
07:34:12 Check angles
07:34:12 SkyScan query
07:34:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.49<-23366  Statuses=0008 0009
[UTC 2019-3-9  07:34:12]
07:34:12 Msec=5250  True Az=112.995  Ze=-170.49  Az status=0008  Ze status=0009
07:34:13 Check angles
07:34:13 SkyScan query
07:34:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:34:13 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:34:13 Message to Master queued w/err=0: serial=186290 error=0
07:34:18 Received message from Master: op=Filter serial=186291
07:34:18 Color wheel filter change from 0 to 0
07:34:18 FLIGetFilterPos err=0  currentPosition=0
07:34:18 FLIGetStepsRemaining err=0  RemainingSteps=0
07:34:18 Filter is already there-color wheel unchanged
07:34:18 Received message from Master: op=Shutter serial=186292
07:34:18 Shutter LASER open
07:34:18 Received message from Camera: op=State serial=186294
07:34:18 GetSingleValue result=40  Value=cccccccc
07:34:18 SkyScan query
07:34:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:34:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:34:19 Parameters OK
07:34:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:34:19 Set A/D data flow result=40
07:34:19 Set A/D channel type result=40
07:34:19 Set A/D encoding result=40
07:34:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:34:19 Set channel filter=0.000000e+000  result=40
07:34:19 Config A/D  Result=40
07:34:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:34:19 Get A/D filter: -9.255963e+061  result=40
07:34:19 Get A/D value=-858993460  result=40
07:34:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:34:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:34:19 Parameters OK
07:34:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:34:19 Set A/D data flow result=40
07:34:19 Set A/D channel type result=40
07:34:19 Set A/D encoding result=40
07:34:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:34:19 Set channel filter=0.000000e+000  result=40
07:34:19 Config A/D  Result=40
07:34:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:34:19 Get A/D filter: -9.255963e+061  result=40
07:34:19 Get A/D value=-858993460  result=40
07:34:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:34:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:34:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:34:19 Aux=
07:34:19 Message to Camera, serial 186294 queued
07:34:27 Received message from Master: op=Shutter serial=186304
07:34:27 Shutter LASER close
07:34:28 Received message from Master: op=PointingHead serial=186308
07:34:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:34:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:34:28 Point started: ret=0
07:34:28 point_skyscan result=0
07:34:29 Check angles
07:34:29 SkyScan query
07:34:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.905<-21527  Statuses=0008 0009
07:34:30 Msec=0  True Az=112.995  Ze=-142.905  Az status=0008  Ze status=0009
07:34:30 Check angles
07:34:30 SkyScan query
07:34:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.935<-20129  Statuses=0008 0009
07:34:30 Msec=750  True Az=112.995  Ze=-121.935  Az status=0008  Ze status=0009
07:34:31 Check angles
07:34:31 SkyScan query
07:34:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.575<-18705  Statuses=0008 0009
07:34:31 Msec=1500  True Az=112.995  Ze=-100.575  Az status=0008  Ze status=0009
07:34:31 Check angles
07:34:31 SkyScan query
07:34:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.155<-17277  Statuses=0008 0009
07:34:32 Msec=2250  True Az=112.995  Ze=-79.155  Az status=0008  Ze status=0009
07:34:32 Check angles
07:34:32 SkyScan query
07:34:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.78<-15852  Statuses=0008 0009
07:34:33 Msec=3000  True Az=112.995  Ze=-57.78  Az status=0008  Ze status=0009
07:34:33 Check angles
07:34:33 SkyScan query
07:34:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.825<-14455  Statuses=0008 0009
07:34:34 Msec=3750  True Az=112.995  Ze=-36.825  Az status=0008  Ze status=0009
07:34:34 Check angles
07:34:34 SkyScan query
07:34:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.84<-13056  Statuses=0008 0009
07:34:34 Msec=4500  True Az=112.995  Ze=-15.84  Az status=0008  Ze status=0009
07:34:34 Check angles
07:34:34 SkyScan query
07:34:35 SkyScan query done: ret=0  az=112.995<-7533  ze=4.86<-11676  Statuses=0008 0009
07:34:35 Msec=5250  True Az=112.995  Ze=4.86  Az status=0008  Ze status=0009
07:34:35 Check angles
07:34:35 SkyScan query
07:34:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:34:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:34:36 Message to Master queued w/err=0: serial=186308 error=0
07:34:41 Received message from Master: op=Filter serial=186309
07:34:41 Color wheel filter change from 0 to 0
07:34:41 FLIGetFilterPos err=0  currentPosition=0
07:34:41 FLIGetStepsRemaining err=0  RemainingSteps=0
07:34:41 Filter is already there-color wheel unchanged
07:34:41 Received message from Master: op=Shutter serial=186310
07:34:41 Shutter LASER close
07:34:41 Received message from Camera: op=State serial=186312
07:34:41 GetSingleValue result=40  Value=cccccccc
07:34:41 SkyScan query
07:34:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:34:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:34:42 Parameters OK
07:34:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:34:42 Set A/D data flow result=40
07:34:42 Set A/D channel type result=40
07:34:42 Set A/D encoding result=40
07:34:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:34:42 Set channel filter=0.000000e+000  result=40
07:34:42 Config A/D  Result=40
07:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:34:42 Get A/D filter: -9.255963e+061  result=40
07:34:42 Get A/D value=-858993460  result=40
07:34:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:34:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:34:42 Parameters OK
07:34:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:34:42 Set A/D data flow result=40
07:34:42 Set A/D channel type result=40
07:34:42 Set A/D encoding result=40
07:34:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:34:42 Set channel filter=0.000000e+000  result=40
07:34:42 Config A/D  Result=40
07:34:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:34:42 Get A/D filter: -9.255963e+061  result=40
07:34:42 Get A/D value=-858993460  result=40
07:34:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:34:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:34:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:34:42 Aux=
07:34:42 Message to Camera, serial 186312 queued
07:35:19 Received message from Master: op=PointingHead serial=186325
07:35:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:35:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:35:19 Point started: ret=0
07:35:19 point_skyscan result=0
07:35:20 Check angles
07:35:20 SkyScan query
07:35:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:35:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:35:20 Message to Master queued w/err=0: serial=186325 error=0
07:35:25 Received message from Master: op=Filter serial=186326
07:35:25 Color wheel filter change from 0 to 0
07:35:25 FLIGetFilterPos err=0  currentPosition=0
07:35:25 FLIGetStepsRemaining err=0  RemainingSteps=0
07:35:25 Filter is already there-color wheel unchanged
07:35:25 Received message from Master: op=Shutter serial=186327
07:35:25 Shutter LASER close
07:35:25 Received message from Camera: op=State serial=186329
07:35:25 GetSingleValue result=40  Value=cccccccc
07:35:25 SkyScan query
07:35:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:35:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:35:26 Parameters OK
07:35:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:35:26 Set A/D data flow result=40
07:35:26 Set A/D channel type result=40
07:35:26 Set A/D encoding result=40
07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:35:26 Set channel filter=0.000000e+000  result=40
07:35:26 Config A/D  Result=40
07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:35:26 Get A/D filter: -9.255963e+061  result=40
07:35:26 Get A/D value=-858993460  result=40
07:35:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:35:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:35:26 Parameters OK
07:35:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:35:26 Set A/D data flow result=40
07:35:26 Set A/D channel type result=40
07:35:26 Set A/D encoding result=40
07:35:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:35:26 Set channel filter=0.000000e+000  result=40
07:35:26 Config A/D  Result=40
07:35:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:35:26 Get A/D filter: -9.255963e+061  result=40
07:35:26 Get A/D value=-858993460  result=40
07:35:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:35:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:35:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:35:26 Aux=
07:35:26 Message to Camera, serial 186329 queued
07:36:03 Received message from Master: op=PointingHead serial=186342
07:36:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:36:03 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:36:03 Point started: ret=0
07:36:03 point_skyscan result=0
07:36:04 Check angles
07:36:04 SkyScan query
07:36:05 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
07:36:05 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
07:36:05 Check angles
07:36:05 SkyScan query
07:36:05 SkyScan query done: ret=0  az=154.185<-10279  ze=-6.495<-12433  Statuses=0009 0008
07:36:05 Msec=750  True Az=154.185  Ze=-6.495  Az status=0009  Ze status=0008
07:36:06 Check angles
07:36:06 SkyScan query
07:36:06 SkyScan query done: ret=0  az=171.645<-11443  ze=-6.495<-12433  Statuses=0009 0008
07:36:06 Msec=1500  True Az=171.645  Ze=-6.495  Az status=0009  Ze status=0008
07:36:06 Check angles
07:36:06 SkyScan query
07:36:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:36:07 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:36:07 Message to Master queued w/err=0: serial=186342 error=0
07:36:12 Received message from Master: op=Filter serial=186343
07:36:12 Color wheel filter change from 0 to 0
07:36:12 FLIGetFilterPos err=0  currentPosition=0
07:36:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:36:12 Filter is already there-color wheel unchanged
07:36:12 Received message from Master: op=Shutter serial=186344
07:36:12 Shutter LASER close
07:36:12 Received message from Camera: op=State serial=186346
07:36:12 GetSingleValue result=40  Value=cccccccc
07:36:12 SkyScan query
07:36:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:36:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:36:13 Parameters OK
07:36:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:36:13 Set A/D data flow result=40
07:36:13 Set A/D channel type result=40
07:36:13 Set A/D encoding result=40
07:36:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:36:13 Set channel filter=0.000000e+000  result=40
07:36:13 Config A/D  Result=40
07:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:36:13 Get A/D filter: -9.255963e+061  result=40
07:36:13 Get A/D value=-858993460  result=40
07:36:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:36:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:36:13 Parameters OK
07:36:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:36:13 Set A/D data flow result=40
07:36:13 Set A/D channel type result=40
07:36:13 Set A/D encoding result=40
07:36:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:36:13 Set channel filter=0.000000e+000  result=40
07:36:13 Config A/D  Result=40
07:36:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:36:13 Get A/D filter: -9.255963e+061  result=40
07:36:13 Get A/D value=-858993460  result=40
07:36:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:36:13 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:36:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:36:13 Aux=
07:36:13 Message to Camera, serial 186346 queued
07:36:49 Received message from Master: op=PointingHead serial=186359
07:36:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:36:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:36:50 Point started: ret=0
07:36:50 point_skyscan result=0
07:36:51 Check angles
07:36:51 SkyScan query
07:36:51 SkyScan query done: ret=0  az=152.79<-10186  ze=6.51<-11566  Statuses=0009 0008
07:36:51 Msec=0  True Az=152.79  Ze=6.51  Az status=0009  Ze status=0008
07:36:51 Check angles
07:36:51 SkyScan query
07:36:52 SkyScan query done: ret=0  az=135.39<-9026  ze=6.495<-11567  Statuses=0009 0008
07:36:52 Msec=750  True Az=135.39  Ze=6.495  Az status=0009  Ze status=0008
07:36:52 Check angles
07:36:52 SkyScan query
07:36:53 SkyScan query done: ret=0  az=117.885<-7859  ze=6.495<-11567  Statuses=0009 0008
07:36:53 Msec=1500  True Az=117.885  Ze=6.495  Az status=0009  Ze status=0008
07:36:53 Check angles
07:36:53 SkyScan query
07:36:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:36:53 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:36:53 Message to Master queued w/err=0: serial=186359 error=0
07:36:58 Received message from Master: op=Filter serial=186360
07:36:58 Color wheel filter change from 0 to 0
07:36:58 FLIGetFilterPos err=0  currentPosition=0
07:36:58 FLIGetStepsRemaining err=0  RemainingSteps=0
07:36:58 Filter is already there-color wheel unchanged
07:36:59 Received message from Master: op=Shutter serial=186361
07:36:59 Shutter LASER close
07:36:59 Received message from Camera: op=State serial=186363
07:36:59 GetSingleValue result=40  Value=cccccccc
07:36:59 SkyScan query
07:36:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:36:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:36:59 Parameters OK
07:36:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:36:59 Set A/D data flow result=40
07:36:59 Set A/D channel type result=40
07:36:59 Set A/D encoding result=40
07:36:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:36:59 Set channel filter=0.000000e+000  result=40
07:36:59 Config A/D  Result=40
07:36:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:36:59 Get A/D filter: -9.255963e+061  result=40
07:36:59 Get A/D value=-858993460  result=40
07:36:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:36:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:36:59 Parameters OK
07:36:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:36:59 Set A/D data flow result=40
07:36:59 Set A/D channel type result=40
07:36:59 Set A/D encoding result=40
07:36:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:36:59 Set channel filter=0.000000e+000  result=40
07:36:59 Config A/D  Result=40
07:36:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:36:59 Get A/D filter: -9.255963e+061  result=40
07:36:59 Get A/D value=-858993460  result=40
07:36:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:36:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:36:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:36:59 Aux=
07:36:59 Message to Camera, serial 186363 queued
07:37:36 Received message from Master: op=PointingHead serial=186376
07:37:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:37:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:37:36 Point started: ret=0
07:37:36 point_skyscan result=0
07:37:37 Check angles
07:37:37 SkyScan query
07:37:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
07:37:38 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
07:37:38 Check angles
07:37:38 SkyScan query
07:37:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.835<-14989  Statuses=0008 0009
07:37:38 Msec=750  True Az=112.995  Ze=-44.835  Az status=0008  Ze status=0009
07:37:39 Check angles
07:37:39 SkyScan query
07:37:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.79<-16386  Statuses=0008 0009
07:37:39 Msec=1500  True Az=112.995  Ze=-65.79  Az status=0008  Ze status=0009
07:37:39 Check angles
07:37:39 SkyScan query
07:37:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
07:37:40 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
07:37:40 Check angles
07:37:40 SkyScan query
07:37:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.12<-19208  Statuses=0008 0009
07:37:41 Msec=3000  True Az=112.995  Ze=-108.12  Az status=0008  Ze status=0009
07:37:41 Check angles
07:37:41 SkyScan query
07:37:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.51<-20634  Statuses=0008 0009
07:37:42 Msec=3750  True Az=112.995  Ze=-129.51  Az status=0008  Ze status=0009
07:37:42 Check angles
07:37:42 SkyScan query
07:37:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.465<-22031  Statuses=0008 0009
07:37:42 Msec=4500  True Az=112.995  Ze=-150.465  Az status=0008  Ze status=0009
07:37:42 Check angles
07:37:42 SkyScan query
07:37:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.225<-23415  Statuses=0008 0009
07:37:43 Msec=5250  True Az=112.995  Ze=-171.225  Az status=0008  Ze status=0009
07:37:43 Check angles
07:37:43 SkyScan query
07:37:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:37:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:37:44 Message to Master queued w/err=0: serial=186376 error=0
07:37:49 Received message from Master: op=Filter serial=186377
07:37:49 Color wheel filter change from 0 to 0
07:37:49 FLIGetFilterPos err=0  currentPosition=0
07:37:49 FLIGetStepsRemaining err=0  RemainingSteps=0
07:37:49 Filter is already there-color wheel unchanged
07:37:49 Received message from Master: op=Shutter serial=186378
07:37:49 Shutter LASER open
07:37:49 Received message from Camera: op=State serial=186380
07:37:49 GetSingleValue result=40  Value=cccccccc
07:37:49 SkyScan query
07:37:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:37:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:37:50 Parameters OK
07:37:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:37:50 Set A/D data flow result=40
07:37:50 Set A/D channel type result=40
07:37:50 Set A/D encoding result=40
07:37:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:37:50 Set channel filter=0.000000e+000  result=40
07:37:50 Config A/D  Result=40
07:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:37:50 Get A/D filter: -9.255963e+061  result=40
07:37:50 Get A/D value=-858993460  result=40
07:37:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:37:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:37:50 Parameters OK
07:37:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:37:50 Set A/D data flow result=40
07:37:50 Set A/D channel type result=40
07:37:50 Set A/D encoding result=40
07:37:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:37:50 Set channel filter=0.000000e+000  result=40
07:37:50 Config A/D  Result=40
07:37:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:37:50 Get A/D filter: -9.255963e+061  result=40
07:37:50 Get A/D value=-858993460  result=40
07:37:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:37:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:37:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:37:50 Aux=
07:37:50 Message to Camera, serial 186380 queued
07:37:58 Received message from Master: op=Shutter serial=186390
07:37:58 Shutter LASER close
07:37:59 Received message from Master: op=PointingHead serial=186394
07:37:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:37:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:37:59 Point started: ret=0
07:37:59 point_skyscan result=0
07:38:00 Check angles
07:38:00 SkyScan query
07:38:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.37<-21558  Statuses=0008 0009
07:38:00 Msec=0  True Az=112.995  Ze=-143.37  Az status=0008  Ze status=0009
07:38:00 Check angles
07:38:00 SkyScan query
07:38:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.98<-20132  Statuses=0008 0009
07:38:01 Msec=750  True Az=112.995  Ze=-121.98  Az status=0008  Ze status=0009
07:38:01 Check angles
07:38:01 SkyScan query
07:38:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.025<-18735  Statuses=0008 0009
07:38:02 Msec=1500  True Az=112.995  Ze=-101.025  Az status=0008  Ze status=0009
07:38:02 Check angles
07:38:02 SkyScan query
07:38:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.085<-17339  Statuses=0008 0009
07:38:02 Msec=2250  True Az=112.995  Ze=-80.085  Az status=0008  Ze status=0009
07:38:03 Check angles
07:38:03 SkyScan query
07:38:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.665<-15911  Statuses=0008 0009
07:38:03 Msec=3000  True Az=112.995  Ze=-58.665  Az status=0008  Ze status=0009
07:38:03 Check angles
07:38:03 SkyScan query
07:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.305<-14487  Statuses=0008 0009
07:38:04 Msec=3750  True Az=112.995  Ze=-37.305  Az status=0008  Ze status=0009
07:38:04 Check angles
07:38:04 SkyScan query
07:38:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.305<-13087  Statuses=0008 0009
07:38:05 Msec=4500  True Az=112.995  Ze=-16.305  Az status=0008  Ze status=0009
07:38:05 Check angles
07:38:05 SkyScan query
07:38:06 SkyScan query done: ret=0  az=112.995<-7533  ze=4.515<-11699  Statuses=0008 0009
07:38:06 Msec=5250  True Az=112.995  Ze=4.515  Az status=0008  Ze status=0009
07:38:06 Check angles
07:38:06 SkyScan query
07:38:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:38:06 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:38:06 Message to Master queued w/err=0: serial=186394 error=0
07:38:11 Received message from Master: op=Filter serial=186395
07:38:11 Color wheel filter change from 0 to 0
07:38:11 FLIGetFilterPos err=0  currentPosition=0
07:38:11 FLIGetStepsRemaining err=0  RemainingSteps=0
07:38:11 Filter is already there-color wheel unchanged
07:38:11 Received message from Master: op=Shutter serial=186396
07:38:11 Shutter LASER close
07:38:12 Received message from Camera: op=State serial=186398
07:38:12 GetSingleValue result=40  Value=cccccccc
07:38:12 SkyScan query
07:38:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:38:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:12 Parameters OK
07:38:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:12 Set A/D data flow result=40
07:38:12 Set A/D channel type result=40
07:38:12 Set A/D encoding result=40
07:38:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:12 Set channel filter=0.000000e+000  result=40
07:38:12 Config A/D  Result=40
07:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:12 Get A/D filter: -9.255963e+061  result=40
07:38:12 Get A/D value=-858993460  result=40
07:38:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:12 Parameters OK
07:38:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:12 Set A/D data flow result=40
07:38:12 Set A/D channel type result=40
07:38:12 Set A/D encoding result=40
07:38:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:12 Set channel filter=0.000000e+000  result=40
07:38:12 Config A/D  Result=40
07:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:12 Get A/D filter: -9.255963e+061  result=40
07:38:12 Get A/D value=-858993460  result=40
07:38:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:38:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:38:12 Aux=
07:38:12 Message to Camera, serial 186398 queued
07:38:49 Received message from Master: op=PointingHead serial=186411
07:38:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:38:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:38:49 Point started: ret=0
07:38:49 point_skyscan result=0
07:38:50 Check angles
07:38:50 SkyScan query
07:38:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:38:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:38:51 Message to Master queued w/err=0: serial=186411 error=0
07:38:56 Received message from Master: op=Filter serial=186412
07:38:56 Color wheel filter change from 0 to 0
07:38:56 FLIGetFilterPos err=0  currentPosition=0
07:38:56 FLIGetStepsRemaining err=0  RemainingSteps=0
07:38:56 Filter is already there-color wheel unchanged
07:38:56 Received message from Master: op=Shutter serial=186413
07:38:56 Shutter LASER close
07:38:56 Received message from Camera: op=State serial=186415
07:38:56 GetSingleValue result=40  Value=cccccccc
07:38:56 SkyScan query
07:38:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:38:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:56 Parameters OK
07:38:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:56 Set A/D data flow result=40
07:38:56 Set A/D channel type result=40
07:38:56 Set A/D encoding result=40
07:38:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:56 Set channel filter=0.000000e+000  result=40
07:38:56 Config A/D  Result=40
07:38:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:56 Get A/D filter: -9.255963e+061  result=40
07:38:56 Get A/D value=-858993460  result=40
07:38:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:38:56 Parameters OK
07:38:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:38:56 Set A/D data flow result=40
07:38:56 Set A/D channel type result=40
07:38:56 Set A/D encoding result=40
07:38:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:38:56 Set channel filter=0.000000e+000  result=40
07:38:56 Config A/D  Result=40
07:38:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:38:56 Get A/D filter: -9.255963e+061  result=40
07:38:56 Get A/D value=-858993460  result=40
07:38:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:38:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:38:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:38:56 Aux=
07:38:56 Message to Camera, serial 186415 queued
07:39:33 Received message from Master: op=PointingHead serial=186428
07:39:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:39:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:39:34 Point started: ret=0
07:39:34 point_skyscan result=0
07:39:34 Check angles
07:39:34 SkyScan query
07:39:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:39:35 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:39:35 Message to Master queued w/err=0: serial=186428 error=0
07:39:40 Received message from Master: op=Filter serial=186429
07:39:40 Color wheel filter change from 0 to 0
07:39:40 FLIGetFilterPos err=0  currentPosition=0
07:39:40 FLIGetStepsRemaining err=0  RemainingSteps=0
07:39:40 Filter is already there-color wheel unchanged
07:39:40 Received message from Master: op=Shutter serial=186430
07:39:40 Shutter LASER close
07:39:40 Received message from Camera: op=State serial=186432
07:39:40 GetSingleValue result=40  Value=cccccccc
07:39:40 SkyScan query
07:39:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:39:41 Parameters OK
07:39:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:39:41 Set A/D data flow result=40
07:39:41 Set A/D channel type result=40
07:39:41 Set A/D encoding result=40
07:39:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:39:41 Set channel filter=0.000000e+000  result=40
07:39:41 Config A/D  Result=40
07:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:39:41 Get A/D filter: -9.255963e+061  result=40
07:39:41 Get A/D value=-858993460  result=40
07:39:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:39:41 Parameters OK
07:39:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:39:41 Set A/D data flow result=40
07:39:41 Set A/D channel type result=40
07:39:41 Set A/D encoding result=40
07:39:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:39:41 Set channel filter=0.000000e+000  result=40
07:39:41 Config A/D  Result=40
07:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:39:41 Get A/D filter: -9.255963e+061  result=40
07:39:41 Get A/D value=-858993460  result=40
07:39:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:39:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:39:41 Aux=
07:39:41 Message to Camera, serial 186432 queued
07:40:18 Received message from Master: op=PointingHead serial=186445
07:40:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:40:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:40:18 Point started: ret=0
07:40:18 point_skyscan result=0
07:40:19 Check angles
07:40:19 SkyScan query
07:40:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:40:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:40:19 Message to Master queued w/err=0: serial=186445 error=0
07:40:24 Received message from Master: op=Filter serial=186446
07:40:24 Color wheel filter change from 0 to 0
07:40:24 FLIGetFilterPos err=0  currentPosition=0
07:40:24 FLIGetStepsRemaining err=0  RemainingSteps=0
07:40:24 Filter is already there-color wheel unchanged
07:40:25 Received message from Master: op=Shutter serial=186447
07:40:25 Shutter LASER close
07:40:25 Received message from Camera: op=State serial=186449
07:40:25 GetSingleValue result=40  Value=cccccccc
07:40:25 SkyScan query
07:40:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:40:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:40:25 Parameters OK
07:40:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:40:25 Set A/D data flow result=40
07:40:25 Set A/D channel type result=40
07:40:25 Set A/D encoding result=40
07:40:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:40:25 Set channel filter=0.000000e+000  result=40
07:40:25 Config A/D  Result=40
07:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:40:25 Get A/D filter: -9.255963e+061  result=40
07:40:25 Get A/D value=-858993460  result=40
07:40:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:40:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:40:25 Parameters OK
07:40:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:40:25 Set A/D data flow result=40
07:40:25 Set A/D channel type result=40
07:40:25 Set A/D encoding result=40
07:40:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:40:25 Set channel filter=0.000000e+000  result=40
07:40:25 Config A/D  Result=40
07:40:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:40:25 Get A/D filter: -9.255963e+061  result=40
07:40:25 Get A/D value=-858993460  result=40
07:40:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:40:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:40:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:40:25 Aux=
07:40:25 Message to Camera, serial 186449 queued
07:41:02 Received message from Master: op=PointingHead serial=186462
07:41:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:41:02 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:41:02 Point started: ret=0
07:41:02 point_skyscan result=0
07:41:03 Check angles
07:41:03 SkyScan query
07:41:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
07:41:04 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
07:41:04 Check angles
07:41:04 SkyScan query
07:41:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.295<-14953  Statuses=0008 0009
07:41:04 Msec=750  True Az=112.995  Ze=-44.295  Az status=0008  Ze status=0009
07:41:05 Check angles
07:41:05 SkyScan query
07:41:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.265<-16351  Statuses=0008 0009
07:41:05 Msec=1500  True Az=112.995  Ze=-65.265  Az status=0008  Ze status=0009
07:41:05 Check angles
07:41:05 SkyScan query
07:41:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.235<-17749  Statuses=0008 0009
07:41:06 Msec=2250  True Az=112.995  Ze=-86.235  Az status=0008  Ze status=0009
07:41:06 Check angles
07:41:06 SkyScan query
07:41:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.175<-19145  Statuses=0008 0009
07:41:07 Msec=3000  True Az=112.995  Ze=-107.175  Az status=0008  Ze status=0009
07:41:07 Check angles
07:41:07 SkyScan query
07:41:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.115<-20541  Statuses=0008 0009
07:41:07 Msec=3750  True Az=112.995  Ze=-128.115  Az status=0008  Ze status=0009
07:41:08 Check angles
07:41:08 SkyScan query
07:41:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.07<-21938  Statuses=0008 0009
07:41:08 Msec=4500  True Az=112.995  Ze=-149.07  Az status=0008  Ze status=0009
07:41:08 Check angles
07:41:08 SkyScan query
07:41:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.995<-23333  Statuses=0008 0009
07:41:09 Msec=5250  True Az=112.995  Ze=-169.995  Az status=0008  Ze status=0009
07:41:09 Check angles
07:41:09 SkyScan query
07:41:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:41:10 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:41:10 Message to Master queued w/err=0: serial=186462 error=0
07:41:15 Received message from Master: op=Filter serial=186463
07:41:15 Color wheel filter change from 0 to 0
07:41:15 FLIGetFilterPos err=0  currentPosition=0
07:41:15 FLIGetStepsRemaining err=0  RemainingSteps=0
07:41:15 Filter is already there-color wheel unchanged
07:41:15 Received message from Master: op=Shutter serial=186464
07:41:15 Shutter LASER open
07:41:15 Received message from Camera: op=State serial=186466
07:41:15 GetSingleValue result=40  Value=cccccccc
07:41:15 SkyScan query
07:41:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:41:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:41:16 Parameters OK
07:41:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:41:16 Set A/D data flow result=40
07:41:16 Set A/D channel type result=40
07:41:16 Set A/D encoding result=40
07:41:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:41:16 Set channel filter=0.000000e+000  result=40
07:41:16 Config A/D  Result=40
07:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:41:16 Get A/D filter: -9.255963e+061  result=40
07:41:16 Get A/D value=-858993460  result=40
07:41:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:41:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:41:16 Parameters OK
07:41:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:41:16 Set A/D data flow result=40
07:41:16 Set A/D channel type result=40
07:41:16 Set A/D encoding result=40
07:41:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:41:16 Set channel filter=0.000000e+000  result=40
07:41:16 Config A/D  Result=40
07:41:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:41:16 Get A/D filter: -9.255963e+061  result=40
07:41:16 Get A/D value=-858993460  result=40
07:41:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:41:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:41:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:41:16 Aux=
07:41:16 Message to Camera, serial 186466 queued
07:41:24 Received message from Master: op=Shutter serial=186476
07:41:24 Shutter LASER close
07:41:25 Received message from Master: op=PointingHead serial=186480
07:41:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:41:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:41:25 Point started: ret=0
07:41:25 point_skyscan result=0
07:41:26 Check angles
07:41:26 SkyScan query
07:41:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.565<-21571  Statuses=0008 0009
07:41:26 Msec=0  True Az=112.995  Ze=-143.565  Az status=0008  Ze status=0009
07:41:27 Check angles
07:41:27 SkyScan query
07:41:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.13<-20142  Statuses=0008 0009
07:41:27 Msec=750  True Az=112.995  Ze=-122.13  Az status=0008  Ze status=0009
07:41:27 Check angles
07:41:27 SkyScan query
07:41:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
07:41:28 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
07:41:28 Check angles
07:41:28 SkyScan query
07:41:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.8<-17320  Statuses=0008 0009
07:41:29 Msec=2250  True Az=112.995  Ze=-79.8  Az status=0008  Ze status=0009
07:41:29 Check angles
07:41:29 SkyScan query
07:41:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
07:41:29 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
07:41:30 Check angles
07:41:30 SkyScan query
07:41:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.47<-14498  Statuses=0008 0009
07:41:30 Msec=3750  True Az=112.995  Ze=-37.47  Az status=0008  Ze status=0009
07:41:30 Check angles
07:41:30 SkyScan query
07:41:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.035<-13069  Statuses=0008 0009
07:41:31 Msec=4500  True Az=112.995  Ze=-16.035  Az status=0008  Ze status=0009
07:41:31 Check angles
07:41:31 SkyScan query
07:41:32 SkyScan query done: ret=0  az=112.995<-7533  ze=4.71<-11686  Statuses=0008 0009
07:41:32 Msec=5250  True Az=112.995  Ze=4.71  Az status=0008  Ze status=0009
07:41:32 Check angles
07:41:32 SkyScan query
07:41:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:41:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:41:32 Message to Master queued w/err=0: serial=186480 error=0
07:41:37 Received message from Master: op=Filter serial=186481
07:41:37 Color wheel filter change from 0 to 0
07:41:37 FLIGetFilterPos err=0  currentPosition=0
07:41:37 FLIGetStepsRemaining err=0  RemainingSteps=0
07:41:37 Filter is already there-color wheel unchanged
07:41:38 Received message from Master: op=Shutter serial=186482
07:41:38 Shutter LASER close
07:41:38 Received message from Camera: op=State serial=186484
07:41:38 GetSingleValue result=40  Value=cccccccc
07:41:38 SkyScan query
07:41:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:41:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:41:38 Parameters OK
07:41:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:41:38 Set A/D data flow result=40
07:41:38 Set A/D channel type result=40
07:41:38 Set A/D encoding result=40
07:41:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:41:38 Set channel filter=0.000000e+000  result=40
07:41:38 Config A/D  Result=40
07:41:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:41:38 Get A/D filter: -9.255963e+061  result=40
07:41:38 Get A/D value=-858993460  result=40
07:41:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:41:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:41:38 Parameters OK
07:41:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:41:38 Set A/D data flow result=40
07:41:38 Set A/D channel type result=40
07:41:38 Set A/D encoding result=40
07:41:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:41:38 Set channel filter=0.000000e+000  result=40
07:41:38 Config A/D  Result=40
07:41:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:41:38 Get A/D filter: -9.255963e+061  result=40
07:41:38 Get A/D value=-858993460  result=40
07:41:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:41:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:41:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:41:38 Aux=
07:41:38 Message to Camera, serial 186484 queued
07:42:15 Received message from Master: op=PointingHead serial=186497
07:42:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:42:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:42:15 Point started: ret=0
07:42:15 point_skyscan result=0
07:42:16 Check angles
07:42:16 SkyScan query
07:42:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:42:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:42:17 Message to Master queued w/err=0: serial=186497 error=0
07:42:22 Received message from Master: op=Filter serial=186498
07:42:22 Color wheel filter change from 0 to 0
07:42:22 FLIGetFilterPos err=0  currentPosition=0
07:42:22 FLIGetStepsRemaining err=0  RemainingSteps=0
07:42:22 Filter is already there-color wheel unchanged
07:42:22 Received message from Master: op=Shutter serial=186499
07:42:22 Shutter LASER close
07:42:22 Received message from Camera: op=State serial=186501
07:42:22 GetSingleValue result=40  Value=cccccccc
07:42:22 SkyScan query
07:42:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:42:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:42:23 Parameters OK
07:42:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:42:23 Set A/D data flow result=40
07:42:23 Set A/D channel type result=40
07:42:23 Set A/D encoding result=40
07:42:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:42:23 Set channel filter=0.000000e+000  result=40
07:42:23 Config A/D  Result=40
07:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:42:23 Get A/D filter: -9.255963e+061  result=40
07:42:23 Get A/D value=-858993460  result=40
07:42:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:42:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:42:23 Parameters OK
07:42:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:42:23 Set A/D data flow result=40
07:42:23 Set A/D channel type result=40
07:42:23 Set A/D encoding result=40
07:42:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:42:23 Set channel filter=0.000000e+000  result=40
07:42:23 Config A/D  Result=40
07:42:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:42:23 Get A/D filter: -9.255963e+061  result=40
07:42:23 Get A/D value=-858993460  result=40
07:42:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:42:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:42:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:42:23 Aux=
07:42:23 Message to Camera, serial 186501 queued
07:42:59 Received message from Master: op=PointingHead serial=186514
07:42:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:42:59 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:43:00 Point started: ret=0
07:43:00 point_skyscan result=0
07:43:01 Check angles
07:43:01 SkyScan query
07:43:01 SkyScan query done: ret=0  az=135.99<-9066  ze=-6.51<-12434  Statuses=0009 0008
07:43:01 Msec=0  True Az=135.99  Ze=-6.51  Az status=0009  Ze status=0008
07:43:01 Check angles
07:43:01 SkyScan query
07:43:02 SkyScan query done: ret=0  az=153.435<-10229  ze=-6.495<-12433  Statuses=0009 0008
07:43:02 Msec=750  True Az=153.435  Ze=-6.495  Az status=0009  Ze status=0008
07:43:02 Check angles
07:43:02 SkyScan query
07:43:03 SkyScan query done: ret=0  az=170.955<-11397  ze=-6.495<-12433  Statuses=0009 0008
07:43:03 Msec=1500  True Az=170.955  Ze=-6.495  Az status=0009  Ze status=0008
07:43:03 Check angles
07:43:03 SkyScan query
07:43:03 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:43:03 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:43:03 Message to Master queued w/err=0: serial=186514 error=0
07:43:08 Received message from Master: op=Filter serial=186515
07:43:08 Color wheel filter change from 0 to 0
07:43:08 FLIGetFilterPos err=0  currentPosition=0
07:43:08 FLIGetStepsRemaining err=0  RemainingSteps=0
07:43:08 Filter is already there-color wheel unchanged
07:43:09 Received message from Master: op=Shutter serial=186516
07:43:09 Shutter LASER close
07:43:09 Received message from Camera: op=State serial=186518
07:43:09 GetSingleValue result=40  Value=cccccccc
07:43:09 SkyScan query
07:43:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:43:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:43:09 Parameters OK
07:43:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:43:09 Set A/D data flow result=40
07:43:09 Set A/D channel type result=40
07:43:09 Set A/D encoding result=40
07:43:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:43:09 Set channel filter=0.000000e+000  result=40
07:43:09 Config A/D  Result=40
07:43:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:43:09 Get A/D filter: -9.255963e+061  result=40
07:43:09 Get A/D value=-858993460  result=40
07:43:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:43:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:43:09 Parameters OK
07:43:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:43:09 Set A/D data flow result=40
07:43:09 Set A/D channel type result=40
07:43:09 Set A/D encoding result=40
07:43:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:43:09 Set channel filter=0.000000e+000  result=40
07:43:09 Config A/D  Result=40
07:43:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:43:09 Get A/D filter: -9.255963e+061  result=40
07:43:09 Get A/D value=-858993460  result=40
07:43:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:43:09 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:43:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:43:09 Aux=
07:43:09 Message to Camera, serial 186518 queued
07:43:46 Received message from Master: op=PointingHead serial=186531
07:43:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:43:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:43:46 Point started: ret=0
07:43:46 point_skyscan result=0
07:43:47 Check angles
07:43:47 SkyScan query
07:43:48 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
07:43:48 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
07:43:48 Check angles
07:43:48 SkyScan query
07:43:48 SkyScan query done: ret=0  az=135.36<-9024  ze=6.495<-11567  Statuses=0009 0008
07:43:48 Msec=750  True Az=135.36  Ze=6.495  Az status=0009  Ze status=0008
[UTC 2019-3-9  07:43:48]
07:43:49 Check angles
07:43:49 SkyScan query
07:43:49 SkyScan query done: ret=0  az=117.9<-7860  ze=6.495<-11567  Statuses=0009 0008
07:43:49 Msec=1500  True Az=117.9  Ze=6.495  Az status=0009  Ze status=0008
07:43:49 Check angles
07:43:49 SkyScan query
07:43:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:43:50 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:43:50 Message to Master queued w/err=0: serial=186531 error=0
07:43:55 Received message from Master: op=Filter serial=186532
07:43:55 Color wheel filter change from 0 to 0
07:43:55 FLIGetFilterPos err=0  currentPosition=0
07:43:55 FLIGetStepsRemaining err=0  RemainingSteps=0
07:43:55 Filter is already there-color wheel unchanged
07:43:55 Received message from Master: op=Shutter serial=186533
07:43:55 Shutter LASER close
07:43:55 Received message from Camera: op=State serial=186535
07:43:55 GetSingleValue result=40  Value=cccccccc
07:43:55 SkyScan query
07:43:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:43:56 Parameters OK
07:43:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:43:56 Set A/D data flow result=40
07:43:56 Set A/D channel type result=40
07:43:56 Set A/D encoding result=40
07:43:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:43:56 Set channel filter=0.000000e+000  result=40
07:43:56 Config A/D  Result=40
07:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:43:56 Get A/D filter: -9.255963e+061  result=40
07:43:56 Get A/D value=-858993460  result=40
07:43:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:43:56 Parameters OK
07:43:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:43:56 Set A/D data flow result=40
07:43:56 Set A/D channel type result=40
07:43:56 Set A/D encoding result=40
07:43:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:43:56 Set channel filter=0.000000e+000  result=40
07:43:56 Config A/D  Result=40
07:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:43:56 Get A/D filter: -9.255963e+061  result=40
07:43:56 Get A/D value=-858993460  result=40
07:43:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:43:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:43:56 Aux=
07:43:56 Message to Camera, serial 186535 queued
07:44:33 Received message from Master: op=PointingHead serial=186548
07:44:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:44:33 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:44:33 Point started: ret=0
07:44:33 point_skyscan result=0
07:44:34 Check angles
07:44:34 SkyScan query
07:44:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.055<-13537  Statuses=0008 0009
07:44:34 Msec=0  True Az=112.995  Ze=-23.055  Az status=0008  Ze status=0009
07:44:34 Check angles
07:44:34 SkyScan query
07:44:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.055<-14937  Statuses=0008 0009
07:44:35 Msec=750  True Az=112.995  Ze=-44.055  Az status=0008  Ze status=0009
07:44:35 Check angles
07:44:35 SkyScan query
07:44:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.995<-16333  Statuses=0008 0009
07:44:36 Msec=1500  True Az=112.995  Ze=-64.995  Az status=0008  Ze status=0009
07:44:36 Check angles
07:44:36 SkyScan query
07:44:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.95<-17730  Statuses=0008 0009
07:44:36 Msec=2250  True Az=112.995  Ze=-85.95  Az status=0008  Ze status=0009
07:44:37 Check angles
07:44:37 SkyScan query
07:44:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.89<-19126  Statuses=0008 0009
07:44:37 Msec=3000  True Az=112.995  Ze=-106.89  Az status=0008  Ze status=0009
07:44:37 Check angles
07:44:37 SkyScan query
07:44:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.86<-20524  Statuses=0008 0009
07:44:38 Msec=3750  True Az=112.995  Ze=-127.86  Az status=0008  Ze status=0009
07:44:38 Check angles
07:44:38 SkyScan query
07:44:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.815<-21921  Statuses=0008 0009
07:44:39 Msec=4500  True Az=112.995  Ze=-148.815  Az status=0008  Ze status=0009
07:44:39 Check angles
07:44:39 SkyScan query
07:44:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.755<-23317  Statuses=0008 0009
07:44:39 Msec=5250  True Az=112.995  Ze=-169.755  Az status=0008  Ze status=0009
07:44:40 Check angles
07:44:40 SkyScan query
07:44:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:44:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:44:40 Message to Master queued w/err=0: serial=186548 error=0
07:44:45 Received message from Master: op=Filter serial=186549
07:44:45 Color wheel filter change from 0 to 0
07:44:45 FLIGetFilterPos err=0  currentPosition=0
07:44:45 FLIGetStepsRemaining err=0  RemainingSteps=0
07:44:45 Filter is already there-color wheel unchanged
07:44:45 Received message from Master: op=Shutter serial=186550
07:44:45 Shutter LASER open
07:44:46 Received message from Camera: op=State serial=186552
07:44:46 GetSingleValue result=40  Value=cccccccc
07:44:46 SkyScan query
07:44:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:44:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:44:46 Parameters OK
07:44:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:44:46 Set A/D data flow result=40
07:44:46 Set A/D channel type result=40
07:44:46 Set A/D encoding result=40
07:44:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:44:46 Set channel filter=0.000000e+000  result=40
07:44:46 Config A/D  Result=40
07:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:44:46 Get A/D filter: -9.255963e+061  result=40
07:44:46 Get A/D value=-858993460  result=40
07:44:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:44:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:44:46 Parameters OK
07:44:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:44:46 Set A/D data flow result=40
07:44:46 Set A/D channel type result=40
07:44:46 Set A/D encoding result=40
07:44:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:44:46 Set channel filter=0.000000e+000  result=40
07:44:46 Config A/D  Result=40
07:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:44:46 Get A/D filter: -9.255963e+061  result=40
07:44:46 Get A/D value=-858993460  result=40
07:44:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:44:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:44:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:44:46 Aux=
07:44:46 Message to Camera, serial 186552 queued
07:44:55 Received message from Master: op=Shutter serial=186562
07:44:55 Shutter LASER close
07:44:55 Received message from Master: op=PointingHead serial=186566
07:44:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:44:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:44:55 Point started: ret=0
07:44:55 point_skyscan result=0
07:44:56 Check angles
07:44:56 SkyScan query
07:44:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
07:44:57 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
07:44:57 Check angles
07:44:57 SkyScan query
07:44:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.07<-20138  Statuses=0008 0009
07:44:58 Msec=750  True Az=112.995  Ze=-122.07  Az status=0008  Ze status=0009
07:44:58 Check angles
07:44:58 SkyScan query
07:44:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
07:44:58 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
07:44:58 Check angles
07:44:58 SkyScan query
07:44:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.74<-17316  Statuses=0008 0009
07:44:59 Msec=2250  True Az=112.995  Ze=-79.74  Az status=0008  Ze status=0009
07:44:59 Check angles
07:44:59 SkyScan query
07:45:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.785<-15919  Statuses=0008 0009
07:45:00 Msec=3000  True Az=112.995  Ze=-58.785  Az status=0008  Ze status=0009
07:45:00 Check angles
07:45:00 SkyScan query
07:45:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.83<-14522  Statuses=0008 0009
07:45:01 Msec=3750  True Az=112.995  Ze=-37.83  Az status=0008  Ze status=0009
07:45:01 Check angles
07:45:01 SkyScan query
07:45:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
07:45:01 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
07:45:01 Check angles
07:45:01 SkyScan query
07:45:02 SkyScan query done: ret=0  az=112.995<-7533  ze=4.44<-11704  Statuses=0008 0009
07:45:02 Msec=5250  True Az=112.995  Ze=4.44  Az status=0008  Ze status=0009
07:45:02 Check angles
07:45:02 SkyScan query
07:45:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:45:03 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:45:03 Message to Master queued w/err=0: serial=186566 error=0
07:45:08 Received message from Master: op=Filter serial=186567
07:45:08 Color wheel filter change from 0 to 0
07:45:08 FLIGetFilterPos err=0  currentPosition=0
07:45:08 FLIGetStepsRemaining err=0  RemainingSteps=0
07:45:08 Filter is already there-color wheel unchanged
07:45:08 Received message from Master: op=Shutter serial=186568
07:45:08 Shutter LASER close
07:45:08 Received message from Camera: op=State serial=186570
07:45:08 GetSingleValue result=40  Value=cccccccc
07:45:08 SkyScan query
07:45:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:45:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:09 Parameters OK
07:45:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:09 Set A/D data flow result=40
07:45:09 Set A/D channel type result=40
07:45:09 Set A/D encoding result=40
07:45:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:09 Set channel filter=0.000000e+000  result=40
07:45:09 Config A/D  Result=40
07:45:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:09 Get A/D filter: -9.255963e+061  result=40
07:45:09 Get A/D value=-858993460  result=40
07:45:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:09 Parameters OK
07:45:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:09 Set A/D data flow result=40
07:45:09 Set A/D channel type result=40
07:45:09 Set A/D encoding result=40
07:45:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:09 Set channel filter=0.000000e+000  result=40
07:45:09 Config A/D  Result=40
07:45:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:09 Get A/D filter: -9.255963e+061  result=40
07:45:09 Get A/D value=-858993460  result=40
07:45:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:45:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:45:09 Aux=
07:45:09 Message to Camera, serial 186570 queued
07:45:46 Received message from Master: op=PointingHead serial=186583
07:45:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:45:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:45:46 Point started: ret=0
07:45:46 point_skyscan result=0
07:45:47 Check angles
07:45:47 SkyScan query
07:45:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:45:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:45:47 Message to Master queued w/err=0: serial=186583 error=0
07:45:52 Received message from Master: op=Filter serial=186584
07:45:52 Color wheel filter change from 0 to 0
07:45:52 FLIGetFilterPos err=0  currentPosition=0
07:45:52 FLIGetStepsRemaining err=0  RemainingSteps=0
07:45:52 Filter is already there-color wheel unchanged
07:45:52 Received message from Master: op=Shutter serial=186585
07:45:52 Shutter LASER close
07:45:52 Received message from Camera: op=State serial=186587
07:45:52 GetSingleValue result=40  Value=cccccccc
07:45:52 SkyScan query
07:45:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:45:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:53 Parameters OK
07:45:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:53 Set A/D data flow result=40
07:45:53 Set A/D channel type result=40
07:45:53 Set A/D encoding result=40
07:45:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:53 Set channel filter=0.000000e+000  result=40
07:45:53 Config A/D  Result=40
07:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:53 Get A/D filter: -9.255963e+061  result=40
07:45:53 Get A/D value=-858993460  result=40
07:45:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:45:53 Parameters OK
07:45:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:45:53 Set A/D data flow result=40
07:45:53 Set A/D channel type result=40
07:45:53 Set A/D encoding result=40
07:45:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:45:53 Set channel filter=0.000000e+000  result=40
07:45:53 Config A/D  Result=40
07:45:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:45:53 Get A/D filter: -9.255963e+061  result=40
07:45:53 Get A/D value=-858993460  result=40
07:45:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:45:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:45:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:45:53 Aux=
07:45:53 Message to Camera, serial 186587 queued
07:46:30 Received message from Master: op=PointingHead serial=186600
07:46:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:46:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:46:30 Point started: ret=0
07:46:30 point_skyscan result=0
07:46:31 Check angles
07:46:31 SkyScan query
07:46:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:46:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:46:32 Message to Master queued w/err=0: serial=186600 error=0
07:46:37 Received message from Master: op=Filter serial=186601
07:46:37 Color wheel filter change from 0 to 0
07:46:37 FLIGetFilterPos err=0  currentPosition=0
07:46:37 FLIGetStepsRemaining err=0  RemainingSteps=0
07:46:37 Filter is already there-color wheel unchanged
07:46:37 Received message from Master: op=Shutter serial=186602
07:46:37 Shutter LASER close
07:46:37 Received message from Camera: op=State serial=186604
07:46:37 GetSingleValue result=40  Value=cccccccc
07:46:37 SkyScan query
07:46:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:46:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:46:37 Parameters OK
07:46:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:46:37 Set A/D data flow result=40
07:46:37 Set A/D channel type result=40
07:46:37 Set A/D encoding result=40
07:46:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:46:37 Set channel filter=0.000000e+000  result=40
07:46:37 Config A/D  Result=40
07:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:46:37 Get A/D filter: -9.255963e+061  result=40
07:46:37 Get A/D value=-858993460  result=40
07:46:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:46:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:46:37 Parameters OK
07:46:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:46:37 Set A/D data flow result=40
07:46:37 Set A/D channel type result=40
07:46:37 Set A/D encoding result=40
07:46:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:46:37 Set channel filter=0.000000e+000  result=40
07:46:37 Config A/D  Result=40
07:46:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:46:37 Get A/D filter: -9.255963e+061  result=40
07:46:37 Get A/D value=-858993460  result=40
07:46:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:46:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:46:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:46:37 Aux=
07:46:37 Message to Camera, serial 186604 queued
07:47:14 Received message from Master: op=PointingHead serial=186617
07:47:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:47:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:47:14 Point started: ret=0
07:47:14 point_skyscan result=0
07:47:15 Check angles
07:47:15 SkyScan query
07:47:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:47:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:47:16 Message to Master queued w/err=0: serial=186617 error=0
07:47:21 Received message from Master: op=Filter serial=186618
07:47:21 Color wheel filter change from 0 to 0
07:47:21 FLIGetFilterPos err=0  currentPosition=0
07:47:21 FLIGetStepsRemaining err=0  RemainingSteps=0
07:47:21 Filter is already there-color wheel unchanged
07:47:21 Received message from Master: op=Shutter serial=186619
07:47:21 Shutter LASER close
07:47:21 Received message from Camera: op=State serial=186621
07:47:21 GetSingleValue result=40  Value=cccccccc
07:47:21 SkyScan query
07:47:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:47:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:47:22 Parameters OK
07:47:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:47:22 Set A/D data flow result=40
07:47:22 Set A/D channel type result=40
07:47:22 Set A/D encoding result=40
07:47:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:47:22 Set channel filter=0.000000e+000  result=40
07:47:22 Config A/D  Result=40
07:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:47:22 Get A/D filter: -9.255963e+061  result=40
07:47:22 Get A/D value=-858993460  result=40
07:47:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:47:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:47:22 Parameters OK
07:47:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:47:22 Set A/D data flow result=40
07:47:22 Set A/D channel type result=40
07:47:22 Set A/D encoding result=40
07:47:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:47:22 Set channel filter=0.000000e+000  result=40
07:47:22 Config A/D  Result=40
07:47:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:47:22 Get A/D filter: -9.255963e+061  result=40
07:47:22 Get A/D value=-858993460  result=40
07:47:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:47:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:47:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:47:22 Aux=
07:47:22 Message to Camera, serial 186621 queued
07:47:58 Received message from Master: op=PointingHead serial=186634
07:47:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:47:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:47:59 Point started: ret=0
07:47:59 point_skyscan result=0
07:47:59 Check angles
07:47:59 SkyScan query
07:48:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
07:48:00 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
07:48:00 Check angles
07:48:00 SkyScan query
07:48:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
07:48:01 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
07:48:01 Check angles
07:48:01 SkyScan query
07:48:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.165<-16411  Statuses=0008 0009
07:48:02 Msec=1500  True Az=112.995  Ze=-66.165  Az status=0008  Ze status=0009
07:48:02 Check angles
07:48:02 SkyScan query
07:48:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.12<-17808  Statuses=0008 0009
07:48:02 Msec=2250  True Az=112.995  Ze=-87.12  Az status=0008  Ze status=0009
07:48:03 Check angles
07:48:03 SkyScan query
07:48:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.06<-19204  Statuses=0008 0009
07:48:03 Msec=3000  True Az=112.995  Ze=-108.06  Az status=0008  Ze status=0009
07:48:03 Check angles
07:48:03 SkyScan query
07:48:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.015<-20601  Statuses=0008 0009
07:48:04 Msec=3750  True Az=112.995  Ze=-129.015  Az status=0008  Ze status=0009
07:48:04 Check angles
07:48:04 SkyScan query
07:48:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.97<-21998  Statuses=0008 0009
07:48:05 Msec=4500  True Az=112.995  Ze=-149.97  Az status=0008  Ze status=0009
07:48:05 Check angles
07:48:05 SkyScan query
07:48:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
07:48:05 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
07:48:06 Check angles
07:48:06 SkyScan query
07:48:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:48:06 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:48:06 Message to Master queued w/err=0: serial=186634 error=0
07:48:11 Received message from Master: op=Filter serial=186635
07:48:11 Color wheel filter change from 0 to 0
07:48:11 FLIGetFilterPos err=0  currentPosition=0
07:48:11 FLIGetStepsRemaining err=0  RemainingSteps=0
07:48:11 Filter is already there-color wheel unchanged
07:48:11 Received message from Master: op=Shutter serial=186636
07:48:11 Shutter LASER open
07:48:11 Received message from Camera: op=State serial=186638
07:48:11 GetSingleValue result=40  Value=cccccccc
07:48:11 SkyScan query
07:48:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:48:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:48:12 Parameters OK
07:48:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:48:12 Set A/D data flow result=40
07:48:12 Set A/D channel type result=40
07:48:12 Set A/D encoding result=40
07:48:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:48:12 Set channel filter=0.000000e+000  result=40
07:48:12 Config A/D  Result=40
07:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:48:12 Get A/D filter: -9.255963e+061  result=40
07:48:12 Get A/D value=-858993460  result=40
07:48:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:48:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:48:12 Parameters OK
07:48:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:48:12 Set A/D data flow result=40
07:48:12 Set A/D channel type result=40
07:48:12 Set A/D encoding result=40
07:48:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:48:12 Set channel filter=0.000000e+000  result=40
07:48:12 Config A/D  Result=40
07:48:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:48:12 Get A/D filter: -9.255963e+061  result=40
07:48:12 Get A/D value=-858993460  result=40
07:48:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:48:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:48:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:48:12 Aux=
07:48:12 Message to Camera, serial 186638 queued
07:48:20 Received message from Master: op=Shutter serial=186647
07:48:20 Shutter LASER close
07:48:20 Received message from Master: op=PointingHead serial=186651
07:48:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:48:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:48:20 Point started: ret=0
07:48:20 point_skyscan result=0
07:48:21 Check angles
07:48:21 SkyScan query
07:48:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
07:48:22 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
07:48:22 Check angles
07:48:22 SkyScan query
07:48:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
07:48:23 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
07:48:23 Check angles
07:48:23 SkyScan query
07:48:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.785<-18719  Statuses=0008 0009
07:48:23 Msec=1500  True Az=112.995  Ze=-100.785  Az status=0008  Ze status=0009
07:48:23 Check angles
07:48:23 SkyScan query
07:48:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.38<-17292  Statuses=0008 0009
07:48:24 Msec=2250  True Az=112.995  Ze=-79.38  Az status=0008  Ze status=0009
07:48:24 Check angles
07:48:24 SkyScan query
07:48:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.41<-15894  Statuses=0008 0009
07:48:25 Msec=3000  True Az=112.995  Ze=-58.41  Az status=0008  Ze status=0009
07:48:25 Check angles
07:48:25 SkyScan query
07:48:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.485<-14499  Statuses=0008 0009
07:48:26 Msec=3750  True Az=112.995  Ze=-37.485  Az status=0008  Ze status=0009
07:48:26 Check angles
07:48:26 SkyScan query
07:48:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.065<-13071  Statuses=0008 0009
07:48:26 Msec=4500  True Az=112.995  Ze=-16.065  Az status=0008  Ze status=0009
07:48:26 Check angles
07:48:26 SkyScan query
07:48:27 SkyScan query done: ret=0  az=112.995<-7533  ze=4.695<-11687  Statuses=0008 0009
07:48:27 Msec=5250  True Az=112.995  Ze=4.695  Az status=0008  Ze status=0009
07:48:27 Check angles
07:48:27 SkyScan query
07:48:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:48:28 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:48:28 Message to Master queued w/err=0: serial=186651 error=0
07:48:33 Received message from Master: op=Filter serial=186652
07:48:33 Color wheel filter change from 0 to 0
07:48:33 FLIGetFilterPos err=0  currentPosition=0
07:48:33 FLIGetStepsRemaining err=0  RemainingSteps=0
07:48:33 Filter is already there-color wheel unchanged
07:48:33 Received message from Master: op=Shutter serial=186653
07:48:33 Shutter LASER close
07:48:33 Received message from Camera: op=State serial=186655
07:48:33 GetSingleValue result=40  Value=cccccccc
07:48:33 SkyScan query
07:48:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:48:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:48:34 Parameters OK
07:48:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:48:34 Set A/D data flow result=40
07:48:34 Set A/D channel type result=40
07:48:34 Set A/D encoding result=40
07:48:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:48:34 Set channel filter=0.000000e+000  result=40
07:48:34 Config A/D  Result=40
07:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:48:34 Get A/D filter: -9.255963e+061  result=40
07:48:34 Get A/D value=-858993460  result=40
07:48:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:48:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:48:34 Parameters OK
07:48:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:48:34 Set A/D data flow result=40
07:48:34 Set A/D channel type result=40
07:48:34 Set A/D encoding result=40
07:48:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:48:34 Set channel filter=0.000000e+000  result=40
07:48:34 Config A/D  Result=40
07:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:48:34 Get A/D filter: -9.255963e+061  result=40
07:48:34 Get A/D value=-858993460  result=40
07:48:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:48:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:48:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:48:34 Aux=
07:48:34 Message to Camera, serial 186655 queued
07:49:11 Received message from Master: op=PointingHead serial=186668
07:49:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:49:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:49:11 Point started: ret=0
07:49:11 point_skyscan result=0
07:49:12 Check angles
07:49:12 SkyScan query
07:49:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:49:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:49:12 Message to Master queued w/err=0: serial=186668 error=0
07:49:17 Received message from Master: op=Filter serial=186669
07:49:17 Color wheel filter change from 0 to 0
07:49:17 FLIGetFilterPos err=0  currentPosition=0
07:49:17 FLIGetStepsRemaining err=0  RemainingSteps=0
07:49:17 Filter is already there-color wheel unchanged
07:49:17 Received message from Master: op=Shutter serial=186670
07:49:17 Shutter LASER close
07:49:17 Received message from Camera: op=State serial=186672
07:49:17 GetSingleValue result=40  Value=cccccccc
07:49:17 SkyScan query
07:49:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:49:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:49:18 Parameters OK
07:49:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:49:18 Set A/D data flow result=40
07:49:18 Set A/D channel type result=40
07:49:18 Set A/D encoding result=40
07:49:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:49:18 Set channel filter=0.000000e+000  result=40
07:49:18 Config A/D  Result=40
07:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:49:18 Get A/D filter: -9.255963e+061  result=40
07:49:18 Get A/D value=-858993460  result=40
07:49:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:49:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:49:18 Parameters OK
07:49:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:49:18 Set A/D data flow result=40
07:49:18 Set A/D channel type result=40
07:49:18 Set A/D encoding result=40
07:49:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:49:18 Set channel filter=0.000000e+000  result=40
07:49:18 Config A/D  Result=40
07:49:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:49:18 Get A/D filter: -9.255963e+061  result=40
07:49:18 Get A/D value=-858993460  result=40
07:49:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:49:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:49:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:49:18 Aux=
07:49:18 Message to Camera, serial 186672 queued
07:49:54 Received message from Master: op=PointingHead serial=186684
07:49:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:49:54 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:49:54 Point started: ret=0
07:49:54 point_skyscan result=0
07:49:55 Check angles
07:49:55 SkyScan query
07:49:56 SkyScan query done: ret=0  az=135.78<-9052  ze=-6.51<-12434  Statuses=0009 0008
07:49:56 Msec=0  True Az=135.78  Ze=-6.51  Az status=0009  Ze status=0008
07:49:56 Check angles
07:49:56 SkyScan query
07:49:56 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
07:49:56 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
07:49:57 Check angles
07:49:57 SkyScan query
07:49:57 SkyScan query done: ret=0  az=171.075<-11405  ze=-6.495<-12433  Statuses=0009 0008
07:49:57 Msec=1500  True Az=171.075  Ze=-6.495  Az status=0009  Ze status=0008
07:49:57 Check angles
07:49:57 SkyScan query
07:49:58 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:49:58 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:49:58 Message to Master queued w/err=0: serial=186684 error=0
07:50:03 Received message from Master: op=Filter serial=186685
07:50:03 Color wheel filter change from 0 to 0
07:50:03 FLIGetFilterPos err=0  currentPosition=0
07:50:03 FLIGetStepsRemaining err=0  RemainingSteps=0
07:50:03 Filter is already there-color wheel unchanged
07:50:03 Received message from Master: op=Shutter serial=186686
07:50:03 Shutter LASER close
07:50:03 Received message from Camera: op=State serial=186688
07:50:03 GetSingleValue result=40  Value=cccccccc
07:50:03 SkyScan query
07:50:04 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:50:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:50:04 Parameters OK
07:50:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:50:04 Set A/D data flow result=40
07:50:04 Set A/D channel type result=40
07:50:04 Set A/D encoding result=40
07:50:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:50:04 Set channel filter=0.000000e+000  result=40
07:50:04 Config A/D  Result=40
07:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:50:04 Get A/D filter: -9.255963e+061  result=40
07:50:04 Get A/D value=-858993460  result=40
07:50:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:50:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:50:04 Parameters OK
07:50:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:50:04 Set A/D data flow result=40
07:50:04 Set A/D channel type result=40
07:50:04 Set A/D encoding result=40
07:50:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:50:04 Set channel filter=0.000000e+000  result=40
07:50:04 Config A/D  Result=40
07:50:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:50:04 Get A/D filter: -9.255963e+061  result=40
07:50:04 Get A/D value=-858993460  result=40
07:50:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:50:04 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:50:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:50:04 Aux=
07:50:04 Message to Camera, serial 186688 queued
07:50:41 Received message from Master: op=PointingHead serial=186701
07:50:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:50:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:50:41 Point started: ret=0
07:50:41 point_skyscan result=0
07:50:42 Check angles
07:50:42 SkyScan query
07:50:42 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
07:50:42 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
07:50:42 Check angles
07:50:42 SkyScan query
07:50:43 SkyScan query done: ret=0  az=135.525<-9035  ze=6.495<-11567  Statuses=0009 0008
07:50:43 Msec=750  True Az=135.525  Ze=6.495  Az status=0009  Ze status=0008
07:50:43 Check angles
07:50:43 SkyScan query
07:50:44 SkyScan query done: ret=0  az=118.08<-7872  ze=6.495<-11567  Statuses=0009 0008
07:50:44 Msec=1500  True Az=118.08  Ze=6.495  Az status=0009  Ze status=0008
07:50:44 Check angles
07:50:44 SkyScan query
07:50:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:50:44 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:50:44 Message to Master queued w/err=0: serial=186701 error=0
07:50:49 Received message from Master: op=Filter serial=186702
07:50:49 Color wheel filter change from 0 to 0
07:50:49 FLIGetFilterPos err=0  currentPosition=0
07:50:49 FLIGetStepsRemaining err=0  RemainingSteps=0
07:50:49 Filter is already there-color wheel unchanged
07:50:50 Received message from Master: op=Shutter serial=186703
07:50:50 Shutter LASER close
07:50:50 Received message from Camera: op=State serial=186705
07:50:50 GetSingleValue result=40  Value=cccccccc
07:50:50 SkyScan query
07:50:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:50:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:50:50 Parameters OK
07:50:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:50:50 Set A/D data flow result=40
07:50:50 Set A/D channel type result=40
07:50:50 Set A/D encoding result=40
07:50:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:50:50 Set channel filter=0.000000e+000  result=40
07:50:50 Config A/D  Result=40
07:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:50:50 Get A/D filter: -9.255963e+061  result=40
07:50:50 Get A/D value=-858993460  result=40
07:50:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:50:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:50:50 Parameters OK
07:50:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:50:50 Set A/D data flow result=40
07:50:50 Set A/D channel type result=40
07:50:50 Set A/D encoding result=40
07:50:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:50:50 Set channel filter=0.000000e+000  result=40
07:50:50 Config A/D  Result=40
07:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:50:50 Get A/D filter: -9.255963e+061  result=40
07:50:50 Get A/D value=-858993460  result=40
07:50:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:50:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:50:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:50:50 Aux=
07:50:50 Message to Camera, serial 186705 queued
07:51:27 Received message from Master: op=PointingHead serial=186718
07:51:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:51:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:51:27 Point started: ret=0
07:51:27 point_skyscan result=0
07:51:28 Check angles
07:51:28 SkyScan query
07:51:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
07:51:29 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
07:51:29 Check angles
07:51:29 SkyScan query
07:51:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.745<-14983  Statuses=0008 0009
07:51:29 Msec=750  True Az=112.995  Ze=-44.745  Az status=0008  Ze status=0009
07:51:30 Check angles
07:51:30 SkyScan query
07:51:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.135<-16409  Statuses=0008 0009
07:51:30 Msec=1500  True Az=112.995  Ze=-66.135  Az status=0008  Ze status=0009
07:51:30 Check angles
07:51:30 SkyScan query
07:51:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.075<-17805  Statuses=0008 0009
07:51:31 Msec=2250  True Az=112.995  Ze=-87.075  Az status=0008  Ze status=0009
07:51:31 Check angles
07:51:31 SkyScan query
07:51:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.465<-19231  Statuses=0008 0009
07:51:32 Msec=3000  True Az=112.995  Ze=-108.465  Az status=0008  Ze status=0009
07:51:32 Check angles
07:51:32 SkyScan query
07:51:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.87<-20658  Statuses=0008 0009
07:51:33 Msec=3750  True Az=112.995  Ze=-129.87  Az status=0008  Ze status=0009
07:51:33 Check angles
07:51:33 SkyScan query
07:51:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.795<-22053  Statuses=0008 0009
07:51:33 Msec=4500  True Az=112.995  Ze=-150.795  Az status=0008  Ze status=0009
07:51:33 Check angles
07:51:33 SkyScan query
07:51:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.48<-23432  Statuses=0008 0009
07:51:34 Msec=5250  True Az=112.995  Ze=-171.48  Az status=0008  Ze status=0009
07:51:34 Check angles
07:51:34 SkyScan query
07:51:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:51:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:51:35 Message to Master queued w/err=0: serial=186718 error=0
07:51:40 Received message from Master: op=Filter serial=186719
07:51:40 Color wheel filter change from 0 to 0
07:51:40 FLIGetFilterPos err=0  currentPosition=0
07:51:40 FLIGetStepsRemaining err=0  RemainingSteps=0
07:51:40 Filter is already there-color wheel unchanged
07:51:40 Received message from Master: op=Shutter serial=186720
07:51:40 Shutter LASER open
07:51:40 Received message from Camera: op=State serial=186722
07:51:40 GetSingleValue result=40  Value=cccccccc
07:51:40 SkyScan query
07:51:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:51:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:51:41 Parameters OK
07:51:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:51:41 Set A/D data flow result=40
07:51:41 Set A/D channel type result=40
07:51:41 Set A/D encoding result=40
07:51:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:51:41 Set channel filter=0.000000e+000  result=40
07:51:41 Config A/D  Result=40
07:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:51:41 Get A/D filter: -9.255963e+061  result=40
07:51:41 Get A/D value=-858993460  result=40
07:51:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:51:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:51:41 Parameters OK
07:51:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:51:41 Set A/D data flow result=40
07:51:41 Set A/D channel type result=40
07:51:41 Set A/D encoding result=40
07:51:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:51:41 Set channel filter=0.000000e+000  result=40
07:51:41 Config A/D  Result=40
07:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:51:41 Get A/D filter: -9.255963e+061  result=40
07:51:41 Get A/D value=-858993460  result=40
07:51:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:51:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:51:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:51:41 Aux=
07:51:41 Message to Camera, serial 186722 queued
07:51:49 Received message from Master: op=Shutter serial=186732
07:51:49 Shutter LASER close
07:51:50 Received message from Master: op=PointingHead serial=186736
07:51:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:51:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:51:50 Point started: ret=0
07:51:50 point_skyscan result=0
07:51:51 Check angles
07:51:51 SkyScan query
07:51:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
07:51:51 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
07:51:51 Check angles
07:51:51 SkyScan query
07:51:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
07:51:52 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
07:51:52 Check angles
07:51:52 SkyScan query
07:51:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.47<-18698  Statuses=0008 0009
07:51:53 Msec=1500  True Az=112.995  Ze=-100.47  Az status=0008  Ze status=0009
07:51:53 Check angles
07:51:53 SkyScan query
07:51:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.515<-17301  Statuses=0008 0009
07:51:54 Msec=2250  True Az=112.995  Ze=-79.515  Az status=0008  Ze status=0009
07:51:54 Check angles
07:51:54 SkyScan query
07:51:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.545<-15903  Statuses=0008 0009
07:51:54 Msec=3000  True Az=112.995  Ze=-58.545  Az status=0008  Ze status=0009
07:51:54 Check angles
07:51:54 SkyScan query
07:51:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.17<-14478  Statuses=0008 0009
07:51:55 Msec=3750  True Az=112.995  Ze=-37.17  Az status=0008  Ze status=0009
07:51:55 Check angles
07:51:55 SkyScan query
07:51:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.185<-13079  Statuses=0008 0009
07:51:56 Msec=4500  True Az=112.995  Ze=-16.185  Az status=0008  Ze status=0009
07:51:56 Check angles
07:51:56 SkyScan query
07:51:57 SkyScan query done: ret=0  az=112.995<-7533  ze=4.62<-11692  Statuses=0008 0009
07:51:57 Msec=5250  True Az=112.995  Ze=4.62  Az status=0008  Ze status=0009
07:51:57 Check angles
07:51:57 SkyScan query
07:51:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:51:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:51:57 Message to Master queued w/err=0: serial=186736 error=0
07:52:02 Received message from Master: op=Filter serial=186737
07:52:02 Color wheel filter change from 0 to 0
07:52:02 FLIGetFilterPos err=0  currentPosition=0
07:52:02 FLIGetStepsRemaining err=0  RemainingSteps=0
07:52:02 Filter is already there-color wheel unchanged
07:52:02 Received message from Master: op=Shutter serial=186738
07:52:02 Shutter LASER close
07:52:03 Received message from Camera: op=State serial=186740
07:52:03 GetSingleValue result=40  Value=cccccccc
07:52:03 SkyScan query
07:52:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:52:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:03 Parameters OK
07:52:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:03 Set A/D data flow result=40
07:52:03 Set A/D channel type result=40
07:52:03 Set A/D encoding result=40
07:52:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:03 Set channel filter=0.000000e+000  result=40
07:52:03 Config A/D  Result=40
07:52:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:03 Get A/D filter: -9.255963e+061  result=40
07:52:03 Get A/D value=-858993460  result=40
07:52:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:03 Parameters OK
07:52:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:03 Set A/D data flow result=40
07:52:03 Set A/D channel type result=40
07:52:03 Set A/D encoding result=40
07:52:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:03 Set channel filter=0.000000e+000  result=40
07:52:03 Config A/D  Result=40
07:52:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:03 Get A/D filter: -9.255963e+061  result=40
07:52:03 Get A/D value=-858993460  result=40
07:52:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:52:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:52:03 Aux=
07:52:03 Message to Camera, serial 186740 queued
07:52:40 Received message from Master: op=PointingHead serial=186753
07:52:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:52:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:52:40 Point started: ret=0
07:52:40 point_skyscan result=0
07:52:41 Check angles
07:52:41 SkyScan query
07:52:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:52:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:52:42 Message to Master queued w/err=0: serial=186753 error=0
07:52:47 Received message from Master: op=Filter serial=186754
07:52:47 Color wheel filter change from 0 to 0
07:52:47 FLIGetFilterPos err=0  currentPosition=0
07:52:47 FLIGetStepsRemaining err=0  RemainingSteps=0
07:52:47 Filter is already there-color wheel unchanged
07:52:47 Received message from Master: op=Shutter serial=186755
07:52:47 Shutter LASER close
07:52:47 Received message from Camera: op=State serial=186757
07:52:47 GetSingleValue result=40  Value=cccccccc
07:52:47 SkyScan query
07:52:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:52:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:47 Parameters OK
07:52:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:47 Set A/D data flow result=40
07:52:47 Set A/D channel type result=40
07:52:47 Set A/D encoding result=40
07:52:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:47 Set channel filter=0.000000e+000  result=40
07:52:47 Config A/D  Result=40
07:52:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:47 Get A/D filter: -9.255963e+061  result=40
07:52:47 Get A/D value=-858993460  result=40
07:52:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:52:47 Parameters OK
07:52:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:52:47 Set A/D data flow result=40
07:52:47 Set A/D channel type result=40
07:52:47 Set A/D encoding result=40
07:52:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:52:47 Set channel filter=0.000000e+000  result=40
07:52:47 Config A/D  Result=40
07:52:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:52:47 Get A/D filter: -9.255963e+061  result=40
07:52:47 Get A/D value=-858993460  result=40
07:52:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:52:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:52:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:52:47 Aux=
07:52:47 Message to Camera, serial 186757 queued
07:53:24 Received message from Master: op=PointingHead serial=186770
07:53:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:53:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:53:25 Point started: ret=0
07:53:25 point_skyscan result=0
07:53:25 Check angles
07:53:25 SkyScan query
07:53:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:53:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:53:26 Message to Master queued w/err=0: serial=186770 error=0
07:53:31 Received message from Master: op=Filter serial=186771
07:53:31 Color wheel filter change from 0 to 0
07:53:31 FLIGetFilterPos err=0  currentPosition=0
07:53:31 FLIGetStepsRemaining err=0  RemainingSteps=0
07:53:31 Filter is already there-color wheel unchanged
07:53:31 Received message from Master: op=Shutter serial=186772
07:53:31 Shutter LASER close
07:53:31 Received message from Camera: op=State serial=186774
07:53:31 GetSingleValue result=40  Value=cccccccc
07:53:31 SkyScan query
07:53:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:53:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:53:32 Parameters OK
07:53:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:53:32 Set A/D data flow result=40
07:53:32 Set A/D channel type result=40
07:53:32 Set A/D encoding result=40
07:53:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:53:32 Set channel filter=0.000000e+000  result=40
07:53:32 Config A/D  Result=40
07:53:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:53:32 Get A/D filter: -9.255963e+061  result=40
07:53:32 Get A/D value=-858993460  result=40
07:53:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:53:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:53:32 Parameters OK
07:53:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:53:32 Set A/D data flow result=40
07:53:32 Set A/D channel type result=40
07:53:32 Set A/D encoding result=40
07:53:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:53:32 Set channel filter=0.000000e+000  result=40
07:53:32 Config A/D  Result=40
07:53:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:53:32 Get A/D filter: -9.255963e+061  result=40
07:53:32 Get A/D value=-858993460  result=40
07:53:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:53:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:53:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:53:32 Aux=
07:53:32 Message to Camera, serial 186774 queued
07:54:09 Received message from Master: op=PointingHead serial=186787
07:54:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:54:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:54:09 Point started: ret=0
07:54:09 point_skyscan result=0
07:54:10 Check angles
07:54:10 SkyScan query
07:54:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:54:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:54:10 Message to Master queued w/err=0: serial=186787 error=0
07:54:15 Received message from Master: op=Filter serial=186788
07:54:15 Color wheel filter change from 0 to 0
07:54:15 FLIGetFilterPos err=0  currentPosition=0
[UTC 2019-3-9  07:54:15]
07:54:15 FLIGetStepsRemaining err=0  RemainingSteps=0
07:54:15 Filter is already there-color wheel unchanged
07:54:16 Received message from Master: op=Shutter serial=186789
07:54:16 Shutter LASER close
07:54:16 Received message from Camera: op=State serial=186791
07:54:16 GetSingleValue result=40  Value=cccccccc
07:54:16 SkyScan query
07:54:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:54:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:54:16 Parameters OK
07:54:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:54:16 Set A/D data flow result=40
07:54:16 Set A/D channel type result=40
07:54:16 Set A/D encoding result=40
07:54:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:54:16 Set channel filter=0.000000e+000  result=40
07:54:16 Config A/D  Result=40
07:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:54:16 Get A/D filter: -9.255963e+061  result=40
07:54:16 Get A/D value=-858993460  result=40
07:54:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:54:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:54:16 Parameters OK
07:54:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:54:16 Set A/D data flow result=40
07:54:16 Set A/D channel type result=40
07:54:16 Set A/D encoding result=40
07:54:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:54:16 Set channel filter=0.000000e+000  result=40
07:54:16 Config A/D  Result=40
07:54:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:54:16 Get A/D filter: -9.255963e+061  result=40
07:54:16 Get A/D value=-858993460  result=40
07:54:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:54:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:54:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:54:16 Aux=
07:54:16 Message to Camera, serial 186791 queued
07:54:52 Received message from Master: op=PointingHead serial=186803
07:54:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:54:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:54:52 Point started: ret=0
07:54:52 point_skyscan result=0
07:54:53 Check angles
07:54:53 SkyScan query
07:54:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
07:54:54 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
07:54:54 Check angles
07:54:54 SkyScan query
07:54:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.865<-14991  Statuses=0008 0009
07:54:54 Msec=750  True Az=112.995  Ze=-44.865  Az status=0008  Ze status=0009
07:54:55 Check angles
07:54:55 SkyScan query
07:54:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.255<-16417  Statuses=0008 0009
07:54:55 Msec=1500  True Az=112.995  Ze=-66.255  Az status=0008  Ze status=0009
07:54:55 Check angles
07:54:55 SkyScan query
07:54:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.21<-17814  Statuses=0008 0009
07:54:56 Msec=2250  True Az=112.995  Ze=-87.21  Az status=0008  Ze status=0009
07:54:56 Check angles
07:54:56 SkyScan query
07:54:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.15<-19210  Statuses=0008 0009
07:54:57 Msec=3000  True Az=112.995  Ze=-108.15  Az status=0008  Ze status=0009
07:54:57 Check angles
07:54:57 SkyScan query
07:54:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.105<-20607  Statuses=0008 0009
07:54:58 Msec=3750  True Az=112.995  Ze=-129.105  Az status=0008  Ze status=0009
07:54:58 Check angles
07:54:58 SkyScan query
07:54:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.06<-22004  Statuses=0008 0009
07:54:58 Msec=4500  True Az=112.995  Ze=-150.06  Az status=0008  Ze status=0009
07:54:58 Check angles
07:54:58 SkyScan query
07:54:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.91<-23394  Statuses=0008 0009
07:54:59 Msec=5250  True Az=112.995  Ze=-170.91  Az status=0008  Ze status=0009
07:54:59 Check angles
07:54:59 SkyScan query
07:55:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:55:00 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:55:00 Message to Master queued w/err=0: serial=186803 error=0
07:55:05 Received message from Master: op=Filter serial=186804
07:55:05 Color wheel filter change from 0 to 0
07:55:05 FLIGetFilterPos err=0  currentPosition=0
07:55:05 FLIGetStepsRemaining err=0  RemainingSteps=0
07:55:05 Filter is already there-color wheel unchanged
07:55:05 Received message from Master: op=Shutter serial=186805
07:55:05 Shutter LASER open
07:55:05 Received message from Camera: op=State serial=186807
07:55:05 GetSingleValue result=40  Value=cccccccc
07:55:05 SkyScan query
07:55:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:55:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:55:06 Parameters OK
07:55:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:55:06 Set A/D data flow result=40
07:55:06 Set A/D channel type result=40
07:55:06 Set A/D encoding result=40
07:55:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:55:06 Set channel filter=0.000000e+000  result=40
07:55:06 Config A/D  Result=40
07:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:55:06 Get A/D filter: -9.255963e+061  result=40
07:55:06 Get A/D value=-858993460  result=40
07:55:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:55:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:55:06 Parameters OK
07:55:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:55:06 Set A/D data flow result=40
07:55:06 Set A/D channel type result=40
07:55:06 Set A/D encoding result=40
07:55:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:55:06 Set channel filter=0.000000e+000  result=40
07:55:06 Config A/D  Result=40
07:55:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:55:06 Get A/D filter: -9.255963e+061  result=40
07:55:06 Get A/D value=-858993460  result=40
07:55:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:55:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:55:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:55:06 Aux=
07:55:06 Message to Camera, serial 186807 queued
07:55:14 Received message from Master: op=Shutter serial=186817
07:55:14 Shutter LASER close
07:55:15 Received message from Master: op=PointingHead serial=186821
07:55:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:55:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:55:15 Point started: ret=0
07:55:15 point_skyscan result=0
07:55:16 Check angles
07:55:16 SkyScan query
07:55:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
07:55:16 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
07:55:17 Check angles
07:55:17 SkyScan query
07:55:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.46<-20164  Statuses=0008 0009
07:55:17 Msec=750  True Az=112.995  Ze=-122.46  Az status=0008  Ze status=0009
07:55:17 Check angles
07:55:17 SkyScan query
07:55:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.07<-18738  Statuses=0008 0009
07:55:18 Msec=1500  True Az=112.995  Ze=-101.07  Az status=0008  Ze status=0009
07:55:18 Check angles
07:55:18 SkyScan query
07:55:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.115<-17341  Statuses=0008 0009
07:55:19 Msec=2250  True Az=112.995  Ze=-80.115  Az status=0008  Ze status=0009
07:55:19 Check angles
07:55:19 SkyScan query
07:55:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.175<-15945  Statuses=0008 0009
07:55:19 Msec=3000  True Az=112.995  Ze=-59.175  Az status=0008  Ze status=0009
07:55:20 Check angles
07:55:20 SkyScan query
07:55:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.755<-14517  Statuses=0008 0009
07:55:20 Msec=3750  True Az=112.995  Ze=-37.755  Az status=0008  Ze status=0009
07:55:20 Check angles
07:55:20 SkyScan query
07:55:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.365<-13091  Statuses=0008 0009
07:55:21 Msec=4500  True Az=112.995  Ze=-16.365  Az status=0008  Ze status=0009
07:55:21 Check angles
07:55:21 SkyScan query
07:55:22 SkyScan query done: ret=0  az=112.995<-7533  ze=4.47<-11702  Statuses=0008 0009
07:55:22 Msec=5250  True Az=112.995  Ze=4.47  Az status=0008  Ze status=0009
07:55:22 Check angles
07:55:22 SkyScan query
07:55:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:55:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:55:22 Message to Master queued w/err=0: serial=186821 error=0
07:55:27 Received message from Master: op=Filter serial=186822
07:55:27 Color wheel filter change from 0 to 0
07:55:27 FLIGetFilterPos err=0  currentPosition=0
07:55:27 FLIGetStepsRemaining err=0  RemainingSteps=0
07:55:27 Filter is already there-color wheel unchanged
07:55:28 Received message from Master: op=Shutter serial=186823
07:55:28 Shutter LASER close
07:55:28 Received message from Camera: op=State serial=186825
07:55:28 GetSingleValue result=40  Value=cccccccc
07:55:28 SkyScan query
07:55:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:55:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:55:28 Parameters OK
07:55:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:55:28 Set A/D data flow result=40
07:55:28 Set A/D channel type result=40
07:55:28 Set A/D encoding result=40
07:55:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:55:28 Set channel filter=0.000000e+000  result=40
07:55:28 Config A/D  Result=40
07:55:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:55:28 Get A/D filter: -9.255963e+061  result=40
07:55:28 Get A/D value=-858993460  result=40
07:55:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:55:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:55:28 Parameters OK
07:55:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:55:28 Set A/D data flow result=40
07:55:28 Set A/D channel type result=40
07:55:28 Set A/D encoding result=40
07:55:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:55:28 Set channel filter=0.000000e+000  result=40
07:55:28 Config A/D  Result=40
07:55:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:55:28 Get A/D filter: -9.255963e+061  result=40
07:55:28 Get A/D value=-858993460  result=40
07:55:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:55:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:55:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:55:28 Aux=
07:55:28 Message to Camera, serial 186825 queued
07:56:05 Received message from Master: op=PointingHead serial=186838
07:56:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:56:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:56:06 Point started: ret=0
07:56:06 point_skyscan result=0
07:56:06 Check angles
07:56:06 SkyScan query
07:56:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:56:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:56:07 Message to Master queued w/err=0: serial=186838 error=0
07:56:12 Received message from Master: op=Filter serial=186839
07:56:12 Color wheel filter change from 0 to 0
07:56:12 FLIGetFilterPos err=0  currentPosition=0
07:56:12 FLIGetStepsRemaining err=0  RemainingSteps=0
07:56:12 Filter is already there-color wheel unchanged
07:56:12 Received message from Master: op=Shutter serial=186840
07:56:12 Shutter LASER close
07:56:12 Received message from Camera: op=State serial=186842
07:56:12 GetSingleValue result=40  Value=cccccccc
07:56:12 SkyScan query
07:56:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:56:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:13 Parameters OK
07:56:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:13 Set A/D data flow result=40
07:56:13 Set A/D channel type result=40
07:56:13 Set A/D encoding result=40
07:56:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:13 Set channel filter=0.000000e+000  result=40
07:56:13 Config A/D  Result=40
07:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:13 Get A/D filter: -9.255963e+061  result=40
07:56:13 Get A/D value=-858993460  result=40
07:56:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:13 Parameters OK
07:56:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:13 Set A/D data flow result=40
07:56:13 Set A/D channel type result=40
07:56:13 Set A/D encoding result=40
07:56:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:13 Set channel filter=0.000000e+000  result=40
07:56:13 Config A/D  Result=40
07:56:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:13 Get A/D filter: -9.255963e+061  result=40
07:56:13 Get A/D value=-858993460  result=40
07:56:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:56:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:56:13 Aux=
07:56:13 Message to Camera, serial 186842 queued
07:56:49 Received message from Master: op=PointingHead serial=186855
07:56:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
07:56:49 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
07:56:50 Point started: ret=0
07:56:50 point_skyscan result=0
07:56:51 Check angles
07:56:51 SkyScan query
07:56:51 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
07:56:51 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
07:56:51 Check angles
07:56:51 SkyScan query
07:56:52 SkyScan query done: ret=0  az=153.78<-10252  ze=-6.495<-12433  Statuses=0009 0008
07:56:52 Msec=750  True Az=153.78  Ze=-6.495  Az status=0009  Ze status=0008
07:56:52 Check angles
07:56:52 SkyScan query
07:56:53 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.495<-12433  Statuses=0009 0008
07:56:53 Msec=1500  True Az=171.33  Ze=-6.495  Az status=0009  Ze status=0008
07:56:53 Check angles
07:56:53 SkyScan query
07:56:53 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:56:53 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
07:56:53 Message to Master queued w/err=0: serial=186855 error=0
07:56:58 Received message from Master: op=Filter serial=186856
07:56:58 Color wheel filter change from 0 to 0
07:56:58 FLIGetFilterPos err=0  currentPosition=0
07:56:58 FLIGetStepsRemaining err=0  RemainingSteps=0
07:56:58 Filter is already there-color wheel unchanged
07:56:59 Received message from Master: op=Shutter serial=186857
07:56:59 Shutter LASER close
07:56:59 Received message from Camera: op=State serial=186859
07:56:59 GetSingleValue result=40  Value=cccccccc
07:56:59 SkyScan query
07:56:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
07:56:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:59 Parameters OK
07:56:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:59 Set A/D data flow result=40
07:56:59 Set A/D channel type result=40
07:56:59 Set A/D encoding result=40
07:56:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:59 Set channel filter=0.000000e+000  result=40
07:56:59 Config A/D  Result=40
07:56:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:59 Get A/D filter: -9.255963e+061  result=40
07:56:59 Get A/D value=-858993460  result=40
07:56:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:56:59 Parameters OK
07:56:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:56:59 Set A/D data flow result=40
07:56:59 Set A/D channel type result=40
07:56:59 Set A/D encoding result=40
07:56:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:56:59 Set channel filter=0.000000e+000  result=40
07:56:59 Config A/D  Result=40
07:56:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:56:59 Get A/D filter: -9.255963e+061  result=40
07:56:59 Get A/D value=-858993460  result=40
07:56:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:56:59 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:56:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:56:59 Aux=
07:56:59 Message to Camera, serial 186859 queued
07:57:36 Received message from Master: op=PointingHead serial=186872
07:57:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:57:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:57:36 Point started: ret=0
07:57:36 point_skyscan result=0
07:57:37 Check angles
07:57:37 SkyScan query
07:57:38 SkyScan query done: ret=0  az=152.37<-10158  ze=6.51<-11566  Statuses=0009 0008
07:57:38 Msec=0  True Az=152.37  Ze=6.51  Az status=0009  Ze status=0008
07:57:38 Check angles
07:57:38 SkyScan query
07:57:38 SkyScan query done: ret=0  az=134.94<-8996  ze=6.495<-11567  Statuses=0009 0008
07:57:38 Msec=750  True Az=134.94  Ze=6.495  Az status=0009  Ze status=0008
07:57:39 Check angles
07:57:39 SkyScan query
07:57:39 SkyScan query done: ret=0  az=117.54<-7836  ze=6.495<-11567  Statuses=0009 0008
07:57:39 Msec=1500  True Az=117.54  Ze=6.495  Az status=0009  Ze status=0008
07:57:39 Check angles
07:57:39 SkyScan query
07:57:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:57:40 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:57:40 Message to Master queued w/err=0: serial=186872 error=0
07:57:45 Received message from Master: op=Filter serial=186873
07:57:45 Color wheel filter change from 0 to 0
07:57:45 FLIGetFilterPos err=0  currentPosition=0
07:57:45 FLIGetStepsRemaining err=0  RemainingSteps=0
07:57:45 Filter is already there-color wheel unchanged
07:57:45 Received message from Master: op=Shutter serial=186874
07:57:45 Shutter LASER close
07:57:45 Received message from Camera: op=State serial=186876
07:57:45 GetSingleValue result=40  Value=cccccccc
07:57:45 SkyScan query
07:57:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:57:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:57:46 Parameters OK
07:57:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:57:46 Set A/D data flow result=40
07:57:46 Set A/D channel type result=40
07:57:46 Set A/D encoding result=40
07:57:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:57:46 Set channel filter=0.000000e+000  result=40
07:57:46 Config A/D  Result=40
07:57:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:57:46 Get A/D filter: -9.255963e+061  result=40
07:57:46 Get A/D value=-858993460  result=40
07:57:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:57:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:57:46 Parameters OK
07:57:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:57:46 Set A/D data flow result=40
07:57:46 Set A/D channel type result=40
07:57:46 Set A/D encoding result=40
07:57:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:57:46 Set channel filter=0.000000e+000  result=40
07:57:46 Config A/D  Result=40
07:57:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:57:46 Get A/D filter: -9.255963e+061  result=40
07:57:46 Get A/D value=-858993460  result=40
07:57:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:57:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:57:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:57:46 Aux=
07:57:46 Message to Camera, serial 186876 queued
07:58:23 Received message from Master: op=PointingHead serial=186889
07:58:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
07:58:23 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
07:58:23 Point started: ret=0
07:58:23 point_skyscan result=0
07:58:24 Check angles
07:58:24 SkyScan query
07:58:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
07:58:24 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
07:58:24 Check angles
07:58:24 SkyScan query
07:58:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.04<-14936  Statuses=0008 0009
07:58:25 Msec=750  True Az=112.995  Ze=-44.04  Az status=0008  Ze status=0009
07:58:25 Check angles
07:58:25 SkyScan query
07:58:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.01<-16334  Statuses=0008 0009
07:58:26 Msec=1500  True Az=112.995  Ze=-65.01  Az status=0008  Ze status=0009
07:58:26 Check angles
07:58:26 SkyScan query
07:58:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.385<-17759  Statuses=0008 0009
07:58:26 Msec=2250  True Az=112.995  Ze=-86.385  Az status=0008  Ze status=0009
07:58:27 Check angles
07:58:27 SkyScan query
07:58:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.325<-19155  Statuses=0008 0009
07:58:27 Msec=3000  True Az=112.995  Ze=-107.325  Az status=0008  Ze status=0009
07:58:27 Check angles
07:58:27 SkyScan query
07:58:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.265<-20551  Statuses=0008 0009
07:58:28 Msec=3750  True Az=112.995  Ze=-128.265  Az status=0008  Ze status=0009
07:58:28 Check angles
07:58:28 SkyScan query
07:58:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.67<-21978  Statuses=0008 0009
07:58:29 Msec=4500  True Az=112.995  Ze=-149.67  Az status=0008  Ze status=0009
07:58:29 Check angles
07:58:29 SkyScan query
07:58:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.58<-23372  Statuses=0008 0009
07:58:30 Msec=5250  True Az=112.995  Ze=-170.58  Az status=0008  Ze status=0009
07:58:30 Check angles
07:58:30 SkyScan query
07:58:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
07:58:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
07:58:30 Message to Master queued w/err=0: serial=186889 error=0
07:58:35 Received message from Master: op=Filter serial=186890
07:58:35 Color wheel filter change from 0 to 0
07:58:35 FLIGetFilterPos err=0  currentPosition=0
07:58:35 FLIGetStepsRemaining err=0  RemainingSteps=0
07:58:35 Filter is already there-color wheel unchanged
07:58:35 Received message from Master: op=Shutter serial=186891
07:58:35 Shutter LASER open
07:58:36 Received message from Camera: op=State serial=186893
07:58:36 GetSingleValue result=40  Value=cccccccc
07:58:36 SkyScan query
07:58:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
07:58:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:58:36 Parameters OK
07:58:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:58:36 Set A/D data flow result=40
07:58:36 Set A/D channel type result=40
07:58:36 Set A/D encoding result=40
07:58:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:58:36 Set channel filter=0.000000e+000  result=40
07:58:36 Config A/D  Result=40
07:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:58:36 Get A/D filter: -9.255963e+061  result=40
07:58:36 Get A/D value=-858993460  result=40
07:58:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:58:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:58:36 Parameters OK
07:58:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:58:36 Set A/D data flow result=40
07:58:36 Set A/D channel type result=40
07:58:36 Set A/D encoding result=40
07:58:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:58:36 Set channel filter=0.000000e+000  result=40
07:58:36 Config A/D  Result=40
07:58:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:58:36 Get A/D filter: -9.255963e+061  result=40
07:58:36 Get A/D value=-858993460  result=40
07:58:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:58:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:58:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:58:36 Aux=
07:58:36 Message to Camera, serial 186893 queued
07:58:45 Received message from Master: op=Shutter serial=186903
07:58:45 Shutter LASER close
07:58:45 Received message from Master: op=PointingHead serial=186907
07:58:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:58:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:58:45 Point started: ret=0
07:58:45 point_skyscan result=0
07:58:46 Check angles
07:58:46 SkyScan query
07:58:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.265<-21551  Statuses=0008 0009
07:58:47 Msec=0  True Az=112.995  Ze=-143.265  Az status=0008  Ze status=0009
07:58:47 Check angles
07:58:47 SkyScan query
07:58:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.31<-20154  Statuses=0008 0009
07:58:48 Msec=750  True Az=112.995  Ze=-122.31  Az status=0008  Ze status=0009
07:58:48 Check angles
07:58:48 SkyScan query
07:58:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.92<-18728  Statuses=0008 0009
07:58:48 Msec=1500  True Az=112.995  Ze=-100.92  Az status=0008  Ze status=0009
07:58:49 Check angles
07:58:49 SkyScan query
07:58:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.515<-17301  Statuses=0008 0009
07:58:49 Msec=2250  True Az=112.995  Ze=-79.515  Az status=0008  Ze status=0009
07:58:49 Check angles
07:58:49 SkyScan query
07:58:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.56<-15904  Statuses=0008 0009
07:58:50 Msec=3000  True Az=112.995  Ze=-58.56  Az status=0008  Ze status=0009
07:58:50 Check angles
07:58:50 SkyScan query
07:58:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.185<-14479  Statuses=0008 0009
07:58:51 Msec=3750  True Az=112.995  Ze=-37.185  Az status=0008  Ze status=0009
07:58:51 Check angles
07:58:51 SkyScan query
07:58:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.765<-13051  Statuses=0008 0009
07:58:51 Msec=4500  True Az=112.995  Ze=-15.765  Az status=0008  Ze status=0009
07:58:52 Check angles
07:58:52 SkyScan query
07:58:52 SkyScan query done: ret=0  az=112.995<-7533  ze=5.22<-11652  Statuses=0008 0009
07:58:52 Msec=5250  True Az=112.995  Ze=5.22  Az status=0008  Ze status=0009
07:58:52 Check angles
07:58:52 SkyScan query
07:58:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
07:58:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
07:58:53 Message to Master queued w/err=0: serial=186907 error=0
07:58:58 Received message from Master: op=Filter serial=186908
07:58:58 Color wheel filter change from 0 to 0
07:58:58 FLIGetFilterPos err=0  currentPosition=0
07:58:58 FLIGetStepsRemaining err=0  RemainingSteps=0
07:58:58 Filter is already there-color wheel unchanged
07:58:58 Received message from Master: op=Shutter serial=186909
07:58:58 Shutter LASER close
07:58:58 Received message from Camera: op=State serial=186911
07:58:58 GetSingleValue result=40  Value=cccccccc
07:58:58 SkyScan query
07:58:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:58:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:58:59 Parameters OK
07:58:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:58:59 Set A/D data flow result=40
07:58:59 Set A/D channel type result=40
07:58:59 Set A/D encoding result=40
07:58:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:58:59 Set channel filter=0.000000e+000  result=40
07:58:59 Config A/D  Result=40
07:58:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:58:59 Get A/D filter: -9.255963e+061  result=40
07:58:59 Get A/D value=-858993460  result=40
07:58:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:58:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:58:59 Parameters OK
07:58:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:58:59 Set A/D data flow result=40
07:58:59 Set A/D channel type result=40
07:58:59 Set A/D encoding result=40
07:58:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:58:59 Set channel filter=0.000000e+000  result=40
07:58:59 Config A/D  Result=40
07:58:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:58:59 Get A/D filter: -9.255963e+061  result=40
07:58:59 Get A/D value=-858993460  result=40
07:58:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:58:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:58:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:58:59 Aux=
07:58:59 Message to Camera, serial 186911 queued
07:59:36 Received message from Master: op=PointingHead serial=186924
07:59:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
07:59:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
07:59:36 Point started: ret=0
07:59:36 point_skyscan result=0
07:59:37 Check angles
07:59:37 SkyScan query
07:59:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:59:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
07:59:37 Message to Master queued w/err=0: serial=186924 error=0
07:59:42 Received message from Master: op=Filter serial=186925
07:59:42 Color wheel filter change from 0 to 0
07:59:42 FLIGetFilterPos err=0  currentPosition=0
07:59:42 FLIGetStepsRemaining err=0  RemainingSteps=0
07:59:42 Filter is already there-color wheel unchanged
07:59:42 Received message from Master: op=Shutter serial=186926
07:59:42 Shutter LASER close
07:59:43 Received message from Camera: op=State serial=186928
07:59:43 GetSingleValue result=40  Value=cccccccc
07:59:43 SkyScan query
07:59:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
07:59:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:59:43 Parameters OK
07:59:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:59:43 Set A/D data flow result=40
07:59:43 Set A/D channel type result=40
07:59:43 Set A/D encoding result=40
07:59:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:59:43 Set channel filter=0.000000e+000  result=40
07:59:43 Config A/D  Result=40
07:59:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:59:43 Get A/D filter: -9.255963e+061  result=40
07:59:43 Get A/D value=-858993460  result=40
07:59:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:59:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
07:59:43 Parameters OK
07:59:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
07:59:43 Set A/D data flow result=40
07:59:43 Set A/D channel type result=40
07:59:43 Set A/D encoding result=40
07:59:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
07:59:43 Set channel filter=0.000000e+000  result=40
07:59:43 Config A/D  Result=40
07:59:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
07:59:43 Get A/D filter: -9.255963e+061  result=40
07:59:43 Get A/D value=-858993460  result=40
07:59:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
07:59:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
07:59:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
07:59:43 Aux=
07:59:43 Message to Camera, serial 186928 queued
08:00:20 Received message from Master: op=PointingHead serial=186941
08:00:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:00:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:00:20 Point started: ret=0
08:00:20 point_skyscan result=0
08:00:21 Check angles
08:00:21 SkyScan query
08:00:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:00:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:00:22 Message to Master queued w/err=0: serial=186941 error=0
08:00:27 Received message from Master: op=Filter serial=186942
08:00:27 Color wheel filter change from 0 to 0
08:00:27 FLIGetFilterPos err=0  currentPosition=0
08:00:27 FLIGetStepsRemaining err=0  RemainingSteps=0
08:00:27 Filter is already there-color wheel unchanged
08:00:27 Received message from Master: op=Shutter serial=186943
08:00:27 Shutter LASER close
08:00:27 Received message from Camera: op=State serial=186945
08:00:27 GetSingleValue result=40  Value=cccccccc
08:00:27 SkyScan query
08:00:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:00:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:00:27 Parameters OK
08:00:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:00:27 Set A/D data flow result=40
08:00:27 Set A/D channel type result=40
08:00:27 Set A/D encoding result=40
08:00:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:00:27 Set channel filter=0.000000e+000  result=40
08:00:27 Config A/D  Result=40
08:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:00:27 Get A/D filter: -9.255963e+061  result=40
08:00:27 Get A/D value=-858993460  result=40
08:00:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:00:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:00:27 Parameters OK
08:00:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:00:27 Set A/D data flow result=40
08:00:27 Set A/D channel type result=40
08:00:27 Set A/D encoding result=40
08:00:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:00:27 Set channel filter=0.000000e+000  result=40
08:00:27 Config A/D  Result=40
08:00:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:00:27 Get A/D filter: -9.255963e+061  result=40
08:00:27 Get A/D value=-858993460  result=40
08:00:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:00:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:00:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:00:27 Aux=
08:00:27 Message to Camera, serial 186945 queued
08:01:04 Received message from Master: op=PointingHead serial=186958
08:01:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:01:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:01:05 Point started: ret=0
08:01:05 point_skyscan result=0
08:01:05 Check angles
08:01:05 SkyScan query
08:01:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:01:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:01:06 Message to Master queued w/err=0: serial=186958 error=0
08:01:11 Received message from Master: op=Filter serial=186959
08:01:11 Color wheel filter change from 0 to 0
08:01:11 FLIGetFilterPos err=0  currentPosition=0
08:01:11 FLIGetStepsRemaining err=0  RemainingSteps=0
08:01:11 Filter is already there-color wheel unchanged
08:01:11 Received message from Master: op=Shutter serial=186960
08:01:11 Shutter LASER close
08:01:11 Received message from Camera: op=State serial=186962
08:01:11 GetSingleValue result=40  Value=cccccccc
08:01:11 SkyScan query
08:01:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:01:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:01:12 Parameters OK
08:01:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:01:12 Set A/D data flow result=40
08:01:12 Set A/D channel type result=40
08:01:12 Set A/D encoding result=40
08:01:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:01:12 Set channel filter=0.000000e+000  result=40
08:01:12 Config A/D  Result=40
08:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:01:12 Get A/D filter: -9.255963e+061  result=40
08:01:12 Get A/D value=-858993460  result=40
08:01:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:01:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:01:12 Parameters OK
08:01:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:01:12 Set A/D data flow result=40
08:01:12 Set A/D channel type result=40
08:01:12 Set A/D encoding result=40
08:01:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:01:12 Set channel filter=0.000000e+000  result=40
08:01:12 Config A/D  Result=40
08:01:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:01:12 Get A/D filter: -9.255963e+061  result=40
08:01:12 Get A/D value=-858993460  result=40
08:01:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:01:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:01:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:01:12 Aux=
08:01:12 Message to Camera, serial 186962 queued
08:01:49 Received message from Master: op=PointingHead serial=186975
08:01:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:01:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:01:49 Point started: ret=0
08:01:49 point_skyscan result=0
08:01:50 Check angles
08:01:50 SkyScan query
08:01:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.19<-13546  Statuses=0008 0009
08:01:50 Msec=0  True Az=112.995  Ze=-23.19  Az status=0008  Ze status=0009
08:01:50 Check angles
08:01:50 SkyScan query
08:01:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.61<-14974  Statuses=0008 0009
08:01:51 Msec=750  True Az=112.995  Ze=-44.61  Az status=0008  Ze status=0009
08:01:51 Check angles
08:01:51 SkyScan query
08:01:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.55<-16370  Statuses=0008 0009
08:01:52 Msec=1500  True Az=112.995  Ze=-65.55  Az status=0008  Ze status=0009
08:01:52 Check angles
08:01:52 SkyScan query
08:01:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.505<-17767  Statuses=0008 0009
08:01:52 Msec=2250  True Az=112.995  Ze=-86.505  Az status=0008  Ze status=0009
08:01:53 Check angles
08:01:53 SkyScan query
08:01:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.88<-19192  Statuses=0008 0009
08:01:53 Msec=3000  True Az=112.995  Ze=-107.88  Az status=0008  Ze status=0009
08:01:53 Check angles
08:01:53 SkyScan query
08:01:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.27<-20618  Statuses=0008 0009
08:01:54 Msec=3750  True Az=112.995  Ze=-129.27  Az status=0008  Ze status=0009
08:01:54 Check angles
08:01:54 SkyScan query
08:01:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.225<-22015  Statuses=0008 0009
08:01:55 Msec=4500  True Az=112.995  Ze=-150.225  Az status=0008  Ze status=0009
08:01:55 Check angles
08:01:55 SkyScan query
08:01:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.045<-23403  Statuses=0008 0009
08:01:56 Msec=5250  True Az=112.995  Ze=-171.045  Az status=0008  Ze status=0009
08:01:56 Check angles
08:01:56 SkyScan query
08:01:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:01:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:01:56 Message to Master queued w/err=0: serial=186975 error=0
08:02:01 Received message from Master: op=Filter serial=186976
08:02:01 Color wheel filter change from 0 to 0
08:02:01 FLIGetFilterPos err=0  currentPosition=0
08:02:01 FLIGetStepsRemaining err=0  RemainingSteps=0
08:02:01 Filter is already there-color wheel unchanged
08:02:01 Received message from Master: op=Shutter serial=186977
08:02:01 Shutter LASER open
08:02:02 Received message from Camera: op=State serial=186979
08:02:02 GetSingleValue result=40  Value=cccccccc
08:02:02 SkyScan query
08:02:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:02:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:02 Parameters OK
08:02:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:02 Set A/D data flow result=40
08:02:02 Set A/D channel type result=40
08:02:02 Set A/D encoding result=40
08:02:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:02 Set channel filter=0.000000e+000  result=40
08:02:02 Config A/D  Result=40
08:02:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:02 Get A/D filter: -9.255963e+061  result=40
08:02:02 Get A/D value=-858993460  result=40
08:02:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:02 Parameters OK
08:02:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:02 Set A/D data flow result=40
08:02:02 Set A/D channel type result=40
08:02:02 Set A/D encoding result=40
08:02:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:02 Set channel filter=0.000000e+000  result=40
08:02:02 Config A/D  Result=40
08:02:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:02 Get A/D filter: -9.255963e+061  result=40
08:02:02 Get A/D value=-858993460  result=40
08:02:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:02:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:02:02 Aux=
08:02:02 Message to Camera, serial 186979 queued
08:02:11 Received message from Master: op=Shutter serial=186989
08:02:11 Shutter LASER close
08:02:11 Received message from Master: op=PointingHead serial=186993
08:02:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:02:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:02:12 Point started: ret=0
08:02:12 point_skyscan result=0
08:02:12 Check angles
08:02:12 SkyScan query
08:02:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
08:02:13 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
08:02:13 Check angles
08:02:13 SkyScan query
08:02:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.665<-20111  Statuses=0008 0009
08:02:14 Msec=750  True Az=112.995  Ze=-121.665  Az status=0008  Ze status=0009
08:02:14 Check angles
08:02:14 SkyScan query
08:02:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
08:02:14 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
08:02:15 Check angles
08:02:15 SkyScan query
08:02:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.785<-17319  Statuses=0008 0009
08:02:15 Msec=2250  True Az=112.995  Ze=-79.785  Az status=0008  Ze status=0009
08:02:15 Check angles
08:02:15 SkyScan query
08:02:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.365<-15891  Statuses=0008 0009
08:02:16 Msec=3000  True Az=112.995  Ze=-58.365  Az status=0008  Ze status=0009
08:02:16 Check angles
08:02:16 SkyScan query
08:02:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.44<-14496  Statuses=0008 0009
08:02:17 Msec=3750  True Az=112.995  Ze=-37.44  Az status=0008  Ze status=0009
08:02:17 Check angles
08:02:17 SkyScan query
08:02:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.455<-13097  Statuses=0008 0009
08:02:17 Msec=4500  True Az=112.995  Ze=-16.455  Az status=0008  Ze status=0009
08:02:18 Check angles
08:02:18 SkyScan query
08:02:18 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
08:02:18 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
08:02:18 Check angles
08:02:18 SkyScan query
08:02:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:02:19 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:02:19 Message to Master queued w/err=0: serial=186993 error=0
08:02:24 Received message from Master: op=Filter serial=186994
08:02:24 Color wheel filter change from 0 to 0
08:02:24 FLIGetFilterPos err=0  currentPosition=0
08:02:24 FLIGetStepsRemaining err=0  RemainingSteps=0
08:02:24 Filter is already there-color wheel unchanged
08:02:24 Received message from Master: op=Shutter serial=186995
08:02:24 Shutter LASER close
08:02:24 Received message from Camera: op=State serial=186997
08:02:24 GetSingleValue result=40  Value=cccccccc
08:02:24 SkyScan query
08:02:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:02:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:25 Parameters OK
08:02:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:25 Set A/D data flow result=40
08:02:25 Set A/D channel type result=40
08:02:25 Set A/D encoding result=40
08:02:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:25 Set channel filter=0.000000e+000  result=40
08:02:25 Config A/D  Result=40
08:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:25 Get A/D filter: -9.255963e+061  result=40
08:02:25 Get A/D value=-858993460  result=40
08:02:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:02:25 Parameters OK
08:02:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:02:25 Set A/D data flow result=40
08:02:25 Set A/D channel type result=40
08:02:25 Set A/D encoding result=40
08:02:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:02:25 Set channel filter=0.000000e+000  result=40
08:02:25 Config A/D  Result=40
08:02:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:02:25 Get A/D filter: -9.255963e+061  result=40
08:02:25 Get A/D value=-858993460  result=40
08:02:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:02:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:02:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:02:25 Aux=
08:02:25 Message to Camera, serial 186997 queued
08:03:02 Received message from Master: op=PointingHead serial=187010
08:03:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:03:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:03:02 Point started: ret=0
08:03:02 point_skyscan result=0
08:03:03 Check angles
08:03:03 SkyScan query
08:03:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:03:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:03:03 Message to Master queued w/err=0: serial=187010 error=0
08:03:08 Received message from Master: op=Filter serial=187011
08:03:08 Color wheel filter change from 0 to 0
08:03:08 FLIGetFilterPos err=0  currentPosition=0
08:03:08 FLIGetStepsRemaining err=0  RemainingSteps=0
08:03:08 Filter is already there-color wheel unchanged
08:03:09 Received message from Master: op=Shutter serial=187012
08:03:09 Shutter LASER close
08:03:09 Received message from Camera: op=State serial=187014
08:03:09 GetSingleValue result=40  Value=cccccccc
08:03:09 SkyScan query
08:03:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:03:09 Parameters OK
08:03:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:03:09 Set A/D data flow result=40
08:03:09 Set A/D channel type result=40
08:03:09 Set A/D encoding result=40
08:03:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:03:09 Set channel filter=0.000000e+000  result=40
08:03:09 Config A/D  Result=40
08:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:03:09 Get A/D filter: -9.255963e+061  result=40
08:03:09 Get A/D value=-858993460  result=40
08:03:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:03:09 Parameters OK
08:03:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:03:09 Set A/D data flow result=40
08:03:09 Set A/D channel type result=40
08:03:09 Set A/D encoding result=40
08:03:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:03:09 Set channel filter=0.000000e+000  result=40
08:03:09 Config A/D  Result=40
08:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:03:09 Get A/D filter: -9.255963e+061  result=40
08:03:09 Get A/D value=-858993460  result=40
08:03:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:03:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:03:09 Aux=
08:03:09 Message to Camera, serial 187014 queued
08:03:36 Received message from Master: op=Identify serial=187015
08:03:45 Received message from Master: op=PointingHead serial=187029
08:03:45 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:03:45 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:03:45 Point started: ret=0
08:03:45 point_skyscan result=0
08:03:46 Check angles
08:03:46 SkyScan query
08:03:47 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.51<-12434  Statuses=0009 0008
08:03:47 Msec=0  True Az=135.915  Ze=-6.51  Az status=0009  Ze status=0008
08:03:47 Check angles
08:03:47 SkyScan query
08:03:47 SkyScan query done: ret=0  az=153.705<-10247  ze=-6.495<-12433  Statuses=0009 0008
08:03:47 Msec=750  True Az=153.705  Ze=-6.495  Az status=0009  Ze status=0008
08:03:48 Check angles
08:03:48 SkyScan query
08:03:48 SkyScan query done: ret=0  az=171.195<-11413  ze=-6.495<-12433  Statuses=0009 0008
08:03:48 Msec=1500  True Az=171.195  Ze=-6.495  Az status=0009  Ze status=0008
08:03:48 Check angles
08:03:48 SkyScan query
08:03:49 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:03:49 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:03:49 Message to Master queued w/err=0: serial=187029 error=0
[UTC 2019-3-9  08:03:49]
08:03:54 Received message from Master: op=Filter serial=187030
08:03:54 Color wheel filter change from 0 to 0
08:03:54 FLIGetFilterPos err=0  currentPosition=0
08:03:54 FLIGetStepsRemaining err=0  RemainingSteps=0
08:03:54 Filter is already there-color wheel unchanged
08:03:54 Received message from Master: op=Shutter serial=187031
08:03:54 Shutter LASER close
08:03:54 Received message from Camera: op=State serial=187033
08:03:54 GetSingleValue result=40  Value=cccccccc
08:03:54 SkyScan query
08:03:55 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:03:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:03:55 Parameters OK
08:03:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:03:55 Set A/D data flow result=40
08:03:55 Set A/D channel type result=40
08:03:55 Set A/D encoding result=40
08:03:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:03:55 Set channel filter=0.000000e+000  result=40
08:03:55 Config A/D  Result=40
08:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:03:55 Get A/D filter: -9.255963e+061  result=40
08:03:55 Get A/D value=-858993460  result=40
08:03:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:03:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:03:55 Parameters OK
08:03:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:03:55 Set A/D data flow result=40
08:03:55 Set A/D channel type result=40
08:03:55 Set A/D encoding result=40
08:03:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:03:55 Set channel filter=0.000000e+000  result=40
08:03:55 Config A/D  Result=40
08:03:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:03:55 Get A/D filter: -9.255963e+061  result=40
08:03:55 Get A/D value=-858993460  result=40
08:03:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:03:55 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:03:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:03:55 Aux=
08:03:55 Message to Camera, serial 187033 queued
08:04:31 Received message from Master: op=PointingHead serial=187045
08:04:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:04:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:04:31 Point started: ret=0
08:04:31 point_skyscan result=0
08:04:32 Check angles
08:04:32 SkyScan query
08:04:32 SkyScan query done: ret=0  az=153.225<-10215  ze=6.51<-11566  Statuses=0009 0008
08:04:32 Msec=0  True Az=153.225  Ze=6.51  Az status=0009  Ze status=0008
08:04:32 Check angles
08:04:32 SkyScan query
08:04:33 SkyScan query done: ret=0  az=135.795<-9053  ze=6.495<-11567  Statuses=0009 0008
08:04:33 Msec=750  True Az=135.795  Ze=6.495  Az status=0009  Ze status=0008
08:04:33 Check angles
08:04:33 SkyScan query
08:04:34 SkyScan query done: ret=0  az=118.26<-7884  ze=6.495<-11567  Statuses=0009 0008
08:04:34 Msec=1500  True Az=118.26  Ze=6.495  Az status=0009  Ze status=0008
08:04:34 Check angles
08:04:34 SkyScan query
08:04:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:04:35 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:04:35 Message to Master queued w/err=0: serial=187045 error=0
08:04:40 Received message from Master: op=Filter serial=187046
08:04:40 Color wheel filter change from 0 to 0
08:04:40 FLIGetFilterPos err=0  currentPosition=0
08:04:40 FLIGetStepsRemaining err=0  RemainingSteps=0
08:04:40 Filter is already there-color wheel unchanged
08:04:40 Received message from Master: op=Shutter serial=187047
08:04:40 Shutter LASER close
08:04:40 Received message from Camera: op=State serial=187049
08:04:40 GetSingleValue result=40  Value=cccccccc
08:04:40 SkyScan query
08:04:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:04:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:04:40 Parameters OK
08:04:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:04:40 Set A/D data flow result=40
08:04:40 Set A/D channel type result=40
08:04:40 Set A/D encoding result=40
08:04:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:04:40 Set channel filter=0.000000e+000  result=40
08:04:40 Config A/D  Result=40
08:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:04:40 Get A/D filter: -9.255963e+061  result=40
08:04:40 Get A/D value=-858993460  result=40
08:04:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:04:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:04:40 Parameters OK
08:04:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:04:40 Set A/D data flow result=40
08:04:40 Set A/D channel type result=40
08:04:40 Set A/D encoding result=40
08:04:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:04:40 Set channel filter=0.000000e+000  result=40
08:04:40 Config A/D  Result=40
08:04:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:04:40 Get A/D filter: -9.255963e+061  result=40
08:04:40 Get A/D value=-858993460  result=40
08:04:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:04:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:04:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:04:40 Aux=
08:04:40 Message to Camera, serial 187049 queued
08:05:17 Received message from Master: op=PointingHead serial=187062
08:05:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:05:17 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:05:18 Point started: ret=0
08:05:18 point_skyscan result=0
08:05:18 Check angles
08:05:18 SkyScan query
08:05:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
08:05:19 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
08:05:19 Check angles
08:05:19 SkyScan query
08:05:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.4<-14960  Statuses=0008 0009
08:05:20 Msec=750  True Az=112.995  Ze=-44.4  Az status=0008  Ze status=0009
08:05:20 Check angles
08:05:20 SkyScan query
08:05:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.355<-16357  Statuses=0008 0009
08:05:20 Msec=1500  True Az=112.995  Ze=-65.355  Az status=0008  Ze status=0009
08:05:21 Check angles
08:05:21 SkyScan query
08:05:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.31<-17754  Statuses=0008 0009
08:05:21 Msec=2250  True Az=112.995  Ze=-86.31  Az status=0008  Ze status=0009
08:05:21 Check angles
08:05:21 SkyScan query
08:05:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.25<-19150  Statuses=0008 0009
08:05:22 Msec=3000  True Az=112.995  Ze=-107.25  Az status=0008  Ze status=0009
08:05:22 Check angles
08:05:22 SkyScan query
08:05:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.205<-20547  Statuses=0008 0009
08:05:23 Msec=3750  True Az=112.995  Ze=-128.205  Az status=0008  Ze status=0009
08:05:23 Check angles
08:05:23 SkyScan query
08:05:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.175<-21945  Statuses=0008 0009
08:05:23 Msec=4500  True Az=112.995  Ze=-149.175  Az status=0008  Ze status=0009
08:05:24 Check angles
08:05:24 SkyScan query
08:05:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.115<-23341  Statuses=0008 0009
08:05:24 Msec=5250  True Az=112.995  Ze=-170.115  Az status=0008  Ze status=0009
08:05:24 Check angles
08:05:24 SkyScan query
08:05:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:05:25 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:05:25 Message to Master queued w/err=0: serial=187062 error=0
08:05:30 Received message from Master: op=Filter serial=187063
08:05:30 Color wheel filter change from 0 to 0
08:05:30 FLIGetFilterPos err=0  currentPosition=0
08:05:30 FLIGetStepsRemaining err=0  RemainingSteps=0
08:05:30 Filter is already there-color wheel unchanged
08:05:30 Received message from Master: op=Shutter serial=187064
08:05:30 Shutter LASER open
08:05:30 Received message from Camera: op=State serial=187066
08:05:30 GetSingleValue result=40  Value=cccccccc
08:05:30 SkyScan query
08:05:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:31 Parameters OK
08:05:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:31 Set A/D data flow result=40
08:05:31 Set A/D channel type result=40
08:05:31 Set A/D encoding result=40
08:05:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:31 Set channel filter=0.000000e+000  result=40
08:05:31 Config A/D  Result=40
08:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:31 Get A/D filter: -9.255963e+061  result=40
08:05:31 Get A/D value=-858993460  result=40
08:05:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:31 Parameters OK
08:05:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:31 Set A/D data flow result=40
08:05:31 Set A/D channel type result=40
08:05:31 Set A/D encoding result=40
08:05:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:31 Set channel filter=0.000000e+000  result=40
08:05:31 Config A/D  Result=40
08:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:31 Get A/D filter: -9.255963e+061  result=40
08:05:31 Get A/D value=-858993460  result=40
08:05:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:05:31 Aux=
08:05:31 Message to Camera, serial 187066 queued
08:05:39 Received message from Master: op=Shutter serial=187076
08:05:39 Shutter LASER close
08:05:40 Received message from Master: op=PointingHead serial=187080
08:05:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:05:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:05:40 Point started: ret=0
08:05:40 point_skyscan result=0
08:05:41 Check angles
08:05:41 SkyScan query
08:05:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.4<-21560  Statuses=0008 0009
08:05:41 Msec=0  True Az=112.995  Ze=-143.4  Az status=0008  Ze status=0009
08:05:42 Check angles
08:05:42 SkyScan query
08:05:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.46<-20164  Statuses=0008 0009
08:05:42 Msec=750  True Az=112.995  Ze=-122.46  Az status=0008  Ze status=0009
08:05:42 Check angles
08:05:42 SkyScan query
08:05:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.49<-18766  Statuses=0008 0009
08:05:43 Msec=1500  True Az=112.995  Ze=-101.49  Az status=0008  Ze status=0009
08:05:43 Check angles
08:05:43 SkyScan query
08:05:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.52<-17368  Statuses=0008 0009
08:05:44 Msec=2250  True Az=112.995  Ze=-80.52  Az status=0008  Ze status=0009
08:05:44 Check angles
08:05:44 SkyScan query
08:05:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.58<-15972  Statuses=0008 0009
08:05:44 Msec=3000  True Az=112.995  Ze=-59.58  Az status=0008  Ze status=0009
08:05:45 Check angles
08:05:45 SkyScan query
08:05:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.61<-14574  Statuses=0008 0009
08:05:45 Msec=3750  True Az=112.995  Ze=-38.61  Az status=0008  Ze status=0009
08:05:45 Check angles
08:05:45 SkyScan query
08:05:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.235<-13149  Statuses=0008 0009
08:05:46 Msec=4500  True Az=112.995  Ze=-17.235  Az status=0008  Ze status=0009
08:05:46 Check angles
08:05:46 SkyScan query
08:05:47 SkyScan query done: ret=0  az=112.995<-7533  ze=3.735<-11751  Statuses=0008 0009
08:05:47 Msec=5250  True Az=112.995  Ze=3.735  Az status=0008  Ze status=0009
08:05:47 Check angles
08:05:47 SkyScan query
08:05:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:05:47 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:05:47 Message to Master queued w/err=0: serial=187080 error=0
08:05:52 Received message from Master: op=Filter serial=187081
08:05:52 Color wheel filter change from 0 to 0
08:05:52 FLIGetFilterPos err=0  currentPosition=0
08:05:52 FLIGetStepsRemaining err=0  RemainingSteps=0
08:05:52 Filter is already there-color wheel unchanged
08:05:53 Received message from Master: op=Shutter serial=187082
08:05:53 Shutter LASER close
08:05:53 Received message from Camera: op=State serial=187084
08:05:53 GetSingleValue result=40  Value=cccccccc
08:05:53 SkyScan query
08:05:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:53 Parameters OK
08:05:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:53 Set A/D data flow result=40
08:05:53 Set A/D channel type result=40
08:05:53 Set A/D encoding result=40
08:05:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:53 Set channel filter=0.000000e+000  result=40
08:05:53 Config A/D  Result=40
08:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:53 Get A/D filter: -9.255963e+061  result=40
08:05:53 Get A/D value=-858993460  result=40
08:05:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:05:53 Parameters OK
08:05:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:05:53 Set A/D data flow result=40
08:05:53 Set A/D channel type result=40
08:05:53 Set A/D encoding result=40
08:05:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:05:53 Set channel filter=0.000000e+000  result=40
08:05:53 Config A/D  Result=40
08:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:05:53 Get A/D filter: -9.255963e+061  result=40
08:05:53 Get A/D value=-858993460  result=40
08:05:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:05:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:05:53 Aux=
08:05:53 Message to Camera, serial 187084 queued
08:06:30 Received message from Master: op=PointingHead serial=187097
08:06:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:06:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:06:30 Point started: ret=0
08:06:30 point_skyscan result=0
08:06:31 Check angles
08:06:31 SkyScan query
08:06:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:06:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:06:32 Message to Master queued w/err=0: serial=187097 error=0
08:06:37 Received message from Master: op=Filter serial=187098
08:06:37 Color wheel filter change from 0 to 0
08:06:37 FLIGetFilterPos err=0  currentPosition=0
08:06:37 FLIGetStepsRemaining err=0  RemainingSteps=0
08:06:37 Filter is already there-color wheel unchanged
08:06:37 Received message from Master: op=Shutter serial=187099
08:06:37 Shutter LASER close
08:06:37 Received message from Camera: op=State serial=187101
08:06:37 GetSingleValue result=40  Value=cccccccc
08:06:37 SkyScan query
08:06:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:06:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:06:38 Parameters OK
08:06:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:06:38 Set A/D data flow result=40
08:06:38 Set A/D channel type result=40
08:06:38 Set A/D encoding result=40
08:06:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:06:38 Set channel filter=0.000000e+000  result=40
08:06:38 Config A/D  Result=40
08:06:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:06:38 Get A/D filter: -9.255963e+061  result=40
08:06:38 Get A/D value=-858993460  result=40
08:06:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:06:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:06:38 Parameters OK
08:06:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:06:38 Set A/D data flow result=40
08:06:38 Set A/D channel type result=40
08:06:38 Set A/D encoding result=40
08:06:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:06:38 Set channel filter=0.000000e+000  result=40
08:06:38 Config A/D  Result=40
08:06:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:06:38 Get A/D filter: -9.255963e+061  result=40
08:06:38 Get A/D value=-858993460  result=40
08:06:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:06:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:06:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:06:38 Aux=
08:06:38 Message to Camera, serial 187101 queued
08:07:14 Received message from Master: op=PointingHead serial=187114
08:07:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:07:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:07:15 Point started: ret=0
08:07:15 point_skyscan result=0
08:07:16 Check angles
08:07:16 SkyScan query
08:07:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:07:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:07:16 Message to Master queued w/err=0: serial=187114 error=0
08:07:21 Received message from Master: op=Filter serial=187115
08:07:21 Color wheel filter change from 0 to 0
08:07:21 FLIGetFilterPos err=0  currentPosition=0
08:07:21 FLIGetStepsRemaining err=0  RemainingSteps=0
08:07:21 Filter is already there-color wheel unchanged
08:07:21 Received message from Master: op=Shutter serial=187116
08:07:21 Shutter LASER close
08:07:21 Received message from Camera: op=State serial=187118
08:07:21 GetSingleValue result=40  Value=cccccccc
08:07:21 SkyScan query
08:07:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:07:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:07:22 Parameters OK
08:07:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:07:22 Set A/D data flow result=40
08:07:22 Set A/D channel type result=40
08:07:22 Set A/D encoding result=40
08:07:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:07:22 Set channel filter=0.000000e+000  result=40
08:07:22 Config A/D  Result=40
08:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:07:22 Get A/D filter: -9.255963e+061  result=40
08:07:22 Get A/D value=-858993460  result=40
08:07:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:07:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:07:22 Parameters OK
08:07:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:07:22 Set A/D data flow result=40
08:07:22 Set A/D channel type result=40
08:07:22 Set A/D encoding result=40
08:07:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:07:22 Set channel filter=0.000000e+000  result=40
08:07:22 Config A/D  Result=40
08:07:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:07:22 Get A/D filter: -9.255963e+061  result=40
08:07:22 Get A/D value=-858993460  result=40
08:07:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:07:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:07:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:07:22 Aux=
08:07:22 Message to Camera, serial 187118 queued
08:07:59 Received message from Master: op=PointingHead serial=187131
08:07:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:07:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:07:59 Point started: ret=0
08:07:59 point_skyscan result=0
08:08:00 Check angles
08:08:00 SkyScan query
08:08:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:08:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:08:00 Message to Master queued w/err=0: serial=187131 error=0
08:08:05 Received message from Master: op=Filter serial=187132
08:08:05 Color wheel filter change from 0 to 0
08:08:05 FLIGetFilterPos err=0  currentPosition=0
08:08:05 FLIGetStepsRemaining err=0  RemainingSteps=0
08:08:05 Filter is already there-color wheel unchanged
08:08:06 Received message from Master: op=Shutter serial=187133
08:08:06 Shutter LASER close
08:08:06 Received message from Camera: op=State serial=187135
08:08:06 GetSingleValue result=40  Value=cccccccc
08:08:06 SkyScan query
08:08:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:08:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:08:06 Parameters OK
08:08:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:08:06 Set A/D data flow result=40
08:08:06 Set A/D channel type result=40
08:08:06 Set A/D encoding result=40
08:08:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:08:06 Set channel filter=0.000000e+000  result=40
08:08:06 Config A/D  Result=40
08:08:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:08:06 Get A/D filter: -9.255963e+061  result=40
08:08:06 Get A/D value=-858993460  result=40
08:08:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:08:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:08:06 Parameters OK
08:08:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:08:06 Set A/D data flow result=40
08:08:06 Set A/D channel type result=40
08:08:06 Set A/D encoding result=40
08:08:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:08:06 Set channel filter=0.000000e+000  result=40
08:08:06 Config A/D  Result=40
08:08:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:08:06 Get A/D filter: -9.255963e+061  result=40
08:08:06 Get A/D value=-858993460  result=40
08:08:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:08:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:08:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:08:06 Aux=
08:08:06 Message to Camera, serial 187135 queued
08:08:42 Received message from Master: op=PointingHead serial=187147
08:08:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:08:42 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:08:42 Point started: ret=0
08:08:42 point_skyscan result=0
08:08:43 Check angles
08:08:43 SkyScan query
08:08:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.205<-13547  Statuses=0008 0009
08:08:44 Msec=0  True Az=112.995  Ze=-23.205  Az status=0008  Ze status=0009
08:08:44 Check angles
08:08:44 SkyScan query
08:08:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.61<-14974  Statuses=0008 0009
08:08:44 Msec=750  True Az=112.995  Ze=-44.61  Az status=0008  Ze status=0009
08:08:45 Check angles
08:08:45 SkyScan query
08:08:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-66<-16400  Statuses=0008 0009
08:08:45 Msec=1500  True Az=112.995  Ze=-66  Az status=0008  Ze status=0009
08:08:45 Check angles
08:08:45 SkyScan query
08:08:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.955<-17797  Statuses=0008 0009
08:08:46 Msec=2250  True Az=112.995  Ze=-86.955  Az status=0008  Ze status=0009
08:08:46 Check angles
08:08:46 SkyScan query
08:08:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.895<-19193  Statuses=0008 0009
08:08:47 Msec=3000  True Az=112.995  Ze=-107.895  Az status=0008  Ze status=0009
08:08:47 Check angles
08:08:47 SkyScan query
08:08:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.835<-20589  Statuses=0008 0009
08:08:48 Msec=3750  True Az=112.995  Ze=-128.835  Az status=0008  Ze status=0009
08:08:48 Check angles
08:08:48 SkyScan query
08:08:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.805<-21987  Statuses=0008 0009
08:08:48 Msec=4500  True Az=112.995  Ze=-149.805  Az status=0008  Ze status=0009
08:08:48 Check angles
08:08:48 SkyScan query
08:08:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.06<-23404  Statuses=0008 0009
08:08:49 Msec=5250  True Az=112.995  Ze=-171.06  Az status=0008  Ze status=0009
08:08:49 Check angles
08:08:49 SkyScan query
08:08:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:08:50 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:08:50 Message to Master queued w/err=0: serial=187147 error=0
08:08:55 Received message from Master: op=Filter serial=187148
08:08:55 Color wheel filter change from 0 to 0
08:08:55 FLIGetFilterPos err=0  currentPosition=0
08:08:55 FLIGetStepsRemaining err=0  RemainingSteps=0
08:08:55 Filter is already there-color wheel unchanged
08:08:55 Received message from Master: op=Shutter serial=187149
08:08:55 Shutter LASER open
08:08:55 Received message from Camera: op=State serial=187151
08:08:55 GetSingleValue result=40  Value=cccccccc
08:08:55 SkyScan query
08:08:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:08:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:08:56 Parameters OK
08:08:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:08:56 Set A/D data flow result=40
08:08:56 Set A/D channel type result=40
08:08:56 Set A/D encoding result=40
08:08:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:08:56 Set channel filter=0.000000e+000  result=40
08:08:56 Config A/D  Result=40
08:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:08:56 Get A/D filter: -9.255963e+061  result=40
08:08:56 Get A/D value=-858993460  result=40
08:08:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:08:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:08:56 Parameters OK
08:08:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:08:56 Set A/D data flow result=40
08:08:56 Set A/D channel type result=40
08:08:56 Set A/D encoding result=40
08:08:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:08:56 Set channel filter=0.000000e+000  result=40
08:08:56 Config A/D  Result=40
08:08:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:08:56 Get A/D filter: -9.255963e+061  result=40
08:08:56 Get A/D value=-858993460  result=40
08:08:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:08:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:08:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:08:56 Aux=
08:08:56 Message to Camera, serial 187151 queued
08:09:04 Received message from Master: op=Shutter serial=187161
08:09:04 Shutter LASER close
08:09:05 Received message from Master: op=PointingHead serial=187165
08:09:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:09:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:09:05 Point started: ret=0
08:09:05 point_skyscan result=0
08:09:06 Check angles
08:09:06 SkyScan query
08:09:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.92<-21528  Statuses=0008 0009
08:09:06 Msec=0  True Az=112.995  Ze=-142.92  Az status=0008  Ze status=0009
08:09:07 Check angles
08:09:07 SkyScan query
08:09:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.53<-20102  Statuses=0008 0009
08:09:07 Msec=750  True Az=112.995  Ze=-121.53  Az status=0008  Ze status=0009
08:09:07 Check angles
08:09:07 SkyScan query
08:09:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.575<-18705  Statuses=0008 0009
08:09:08 Msec=1500  True Az=112.995  Ze=-100.575  Az status=0008  Ze status=0009
08:09:08 Check angles
08:09:08 SkyScan query
08:09:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.62<-17308  Statuses=0008 0009
08:09:09 Msec=2250  True Az=112.995  Ze=-79.62  Az status=0008  Ze status=0009
08:09:09 Check angles
08:09:09 SkyScan query
08:09:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.665<-15911  Statuses=0008 0009
08:09:09 Msec=3000  True Az=112.995  Ze=-58.665  Az status=0008  Ze status=0009
08:09:10 Check angles
08:09:10 SkyScan query
08:09:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.29<-14486  Statuses=0008 0009
08:09:10 Msec=3750  True Az=112.995  Ze=-37.29  Az status=0008  Ze status=0009
08:09:10 Check angles
08:09:10 SkyScan query
08:09:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.29<-13086  Statuses=0008 0009
08:09:11 Msec=4500  True Az=112.995  Ze=-16.29  Az status=0008  Ze status=0009
08:09:11 Check angles
08:09:11 SkyScan query
08:09:12 SkyScan query done: ret=0  az=112.995<-7533  ze=4.53<-11698  Statuses=0008 0009
08:09:12 Msec=5250  True Az=112.995  Ze=4.53  Az status=0008  Ze status=0009
08:09:12 Check angles
08:09:12 SkyScan query
08:09:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:09:12 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:09:12 Message to Master queued w/err=0: serial=187165 error=0
08:09:17 Received message from Master: op=Filter serial=187166
08:09:17 Color wheel filter change from 0 to 0
08:09:17 FLIGetFilterPos err=0  currentPosition=0
08:09:17 FLIGetStepsRemaining err=0  RemainingSteps=0
08:09:17 Filter is already there-color wheel unchanged
08:09:18 Received message from Master: op=Shutter serial=187167
08:09:18 Shutter LASER close
08:09:18 Received message from Camera: op=State serial=187169
08:09:18 GetSingleValue result=40  Value=cccccccc
08:09:18 SkyScan query
08:09:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:09:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:09:18 Parameters OK
08:09:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:09:18 Set A/D data flow result=40
08:09:18 Set A/D channel type result=40
08:09:18 Set A/D encoding result=40
08:09:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:09:18 Set channel filter=0.000000e+000  result=40
08:09:18 Config A/D  Result=40
08:09:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:09:18 Get A/D filter: -9.255963e+061  result=40
08:09:18 Get A/D value=-858993460  result=40
08:09:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:09:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:09:18 Parameters OK
08:09:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:09:18 Set A/D data flow result=40
08:09:18 Set A/D channel type result=40
08:09:18 Set A/D encoding result=40
08:09:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:09:18 Set channel filter=0.000000e+000  result=40
08:09:18 Config A/D  Result=40
08:09:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:09:18 Get A/D filter: -9.255963e+061  result=40
08:09:18 Get A/D value=-858993460  result=40
08:09:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:09:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:09:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:09:18 Aux=
08:09:18 Message to Camera, serial 187169 queued
08:09:55 Received message from Master: op=PointingHead serial=187182
08:09:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:09:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:09:55 Point started: ret=0
08:09:55 point_skyscan result=0
08:09:56 Check angles
08:09:56 SkyScan query
08:09:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:09:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:09:57 Message to Master queued w/err=0: serial=187182 error=0
08:10:02 Received message from Master: op=Filter serial=187183
08:10:02 Color wheel filter change from 0 to 0
08:10:02 FLIGetFilterPos err=0  currentPosition=0
08:10:02 FLIGetStepsRemaining err=0  RemainingSteps=0
08:10:02 Filter is already there-color wheel unchanged
08:10:02 Received message from Master: op=Shutter serial=187184
08:10:02 Shutter LASER close
08:10:02 Received message from Camera: op=State serial=187186
08:10:02 GetSingleValue result=40  Value=cccccccc
08:10:02 SkyScan query
08:10:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:10:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:10:03 Parameters OK
08:10:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:10:03 Set A/D data flow result=40
08:10:03 Set A/D channel type result=40
08:10:03 Set A/D encoding result=40
08:10:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:10:03 Set channel filter=0.000000e+000  result=40
08:10:03 Config A/D  Result=40
08:10:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:10:03 Get A/D filter: -9.255963e+061  result=40
08:10:03 Get A/D value=-858993460  result=40
08:10:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:10:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:10:03 Parameters OK
08:10:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:10:03 Set A/D data flow result=40
08:10:03 Set A/D channel type result=40
08:10:03 Set A/D encoding result=40
08:10:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:10:03 Set channel filter=0.000000e+000  result=40
08:10:03 Config A/D  Result=40
08:10:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:10:03 Get A/D filter: -9.255963e+061  result=40
08:10:03 Get A/D value=-858993460  result=40
08:10:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:10:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:10:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:10:03 Aux=
08:10:03 Message to Camera, serial 187186 queued
08:10:39 Received message from Master: op=PointingHead serial=187199
08:10:39 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:10:39 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:10:40 Point started: ret=0
08:10:40 point_skyscan result=0
08:10:41 Check angles
08:10:41 SkyScan query
08:10:41 SkyScan query done: ret=0  az=135.72<-9048  ze=-6.51<-12434  Statuses=0009 0008
08:10:41 Msec=0  True Az=135.72  Ze=-6.51  Az status=0009  Ze status=0008
08:10:41 Check angles
08:10:41 SkyScan query
08:10:42 SkyScan query done: ret=0  az=153.255<-10217  ze=-6.495<-12433  Statuses=0009 0008
08:10:42 Msec=750  True Az=153.255  Ze=-6.495  Az status=0009  Ze status=0008
08:10:42 Check angles
08:10:42 SkyScan query
08:10:43 SkyScan query done: ret=0  az=171.105<-11407  ze=-6.495<-12433  Statuses=0009 0008
08:10:43 Msec=1500  True Az=171.105  Ze=-6.495  Az status=0009  Ze status=0008
08:10:43 Check angles
08:10:43 SkyScan query
08:10:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:10:43 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:10:43 Message to Master queued w/err=0: serial=187199 error=0
08:10:48 Received message from Master: op=Filter serial=187200
08:10:48 Color wheel filter change from 0 to 0
08:10:48 FLIGetFilterPos err=0  currentPosition=0
08:10:48 FLIGetStepsRemaining err=0  RemainingSteps=0
08:10:48 Filter is already there-color wheel unchanged
08:10:49 Received message from Master: op=Shutter serial=187201
08:10:49 Shutter LASER close
08:10:49 Received message from Camera: op=State serial=187203
08:10:49 GetSingleValue result=40  Value=cccccccc
08:10:49 SkyScan query
08:10:49 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:10:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:10:49 Parameters OK
08:10:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:10:49 Set A/D data flow result=40
08:10:49 Set A/D channel type result=40
08:10:49 Set A/D encoding result=40
08:10:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:10:49 Set channel filter=0.000000e+000  result=40
08:10:49 Config A/D  Result=40
08:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:10:49 Get A/D filter: -9.255963e+061  result=40
08:10:49 Get A/D value=-858993460  result=40
08:10:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:10:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:10:49 Parameters OK
08:10:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:10:49 Set A/D data flow result=40
08:10:49 Set A/D channel type result=40
08:10:49 Set A/D encoding result=40
08:10:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:10:49 Set channel filter=0.000000e+000  result=40
08:10:49 Config A/D  Result=40
08:10:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:10:49 Get A/D filter: -9.255963e+061  result=40
08:10:49 Get A/D value=-858993460  result=40
08:10:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:10:49 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:10:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:10:49 Aux=
08:10:49 Message to Camera, serial 187203 queued
08:11:26 Received message from Master: op=PointingHead serial=187216
08:11:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:11:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:11:26 Point started: ret=0
08:11:26 point_skyscan result=0
08:11:27 Check angles
08:11:27 SkyScan query
08:11:28 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
08:11:28 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
08:11:28 Check angles
08:11:28 SkyScan query
08:11:28 SkyScan query done: ret=0  az=135.33<-9022  ze=6.495<-11567  Statuses=0009 0008
08:11:28 Msec=750  True Az=135.33  Ze=6.495  Az status=0009  Ze status=0008
08:11:29 Check angles
08:11:29 SkyScan query
08:11:29 SkyScan query done: ret=0  az=117.9<-7860  ze=6.495<-11567  Statuses=0009 0008
08:11:29 Msec=1500  True Az=117.9  Ze=6.495  Az status=0009  Ze status=0008
08:11:29 Check angles
08:11:29 SkyScan query
08:11:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:11:30 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:11:30 Message to Master queued w/err=0: serial=187216 error=0
08:11:35 Received message from Master: op=Filter serial=187217
08:11:35 Color wheel filter change from 0 to 0
08:11:35 FLIGetFilterPos err=0  currentPosition=0
08:11:35 FLIGetStepsRemaining err=0  RemainingSteps=0
08:11:35 Filter is already there-color wheel unchanged
08:11:35 Received message from Master: op=Shutter serial=187218
08:11:35 Shutter LASER close
08:11:35 Received message from Camera: op=State serial=187220
08:11:35 GetSingleValue result=40  Value=cccccccc
08:11:35 SkyScan query
08:11:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:11:36 Parameters OK
08:11:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:11:36 Set A/D data flow result=40
08:11:36 Set A/D channel type result=40
08:11:36 Set A/D encoding result=40
08:11:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:11:36 Set channel filter=0.000000e+000  result=40
08:11:36 Config A/D  Result=40
08:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:11:36 Get A/D filter: -9.255963e+061  result=40
08:11:36 Get A/D value=-858993460  result=40
08:11:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:11:36 Parameters OK
08:11:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:11:36 Set A/D data flow result=40
08:11:36 Set A/D channel type result=40
08:11:36 Set A/D encoding result=40
08:11:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:11:36 Set channel filter=0.000000e+000  result=40
08:11:36 Config A/D  Result=40
08:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:11:36 Get A/D filter: -9.255963e+061  result=40
08:11:36 Get A/D value=-858993460  result=40
08:11:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:11:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:11:36 Aux=
08:11:36 Message to Camera, serial 187220 queued
08:12:13 Received message from Master: op=PointingHead serial=187233
08:12:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:12:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:12:13 Point started: ret=0
08:12:13 point_skyscan result=0
08:12:14 Check angles
08:12:14 SkyScan query
08:12:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.25<-13550  Statuses=0008 0009
08:12:14 Msec=0  True Az=112.995  Ze=-23.25  Az status=0008  Ze status=0009
08:12:14 Check angles
08:12:14 SkyScan query
08:12:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.685<-14979  Statuses=0008 0009
08:12:15 Msec=750  True Az=112.995  Ze=-44.685  Az status=0008  Ze status=0009
08:12:15 Check angles
08:12:15 SkyScan query
08:12:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.61<-16374  Statuses=0008 0009
08:12:16 Msec=1500  True Az=112.995  Ze=-65.61  Az status=0008  Ze status=0009
08:12:16 Check angles
08:12:16 SkyScan query
08:12:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.58<-17772  Statuses=0008 0009
08:12:16 Msec=2250  True Az=112.995  Ze=-86.58  Az status=0008  Ze status=0009
08:12:17 Check angles
08:12:17 SkyScan query
08:12:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.955<-19197  Statuses=0008 0009
08:12:17 Msec=3000  True Az=112.995  Ze=-107.955  Az status=0008  Ze status=0009
08:12:17 Check angles
08:12:17 SkyScan query
08:12:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.895<-20593  Statuses=0008 0009
08:12:18 Msec=3750  True Az=112.995  Ze=-128.895  Az status=0008  Ze status=0009
08:12:18 Check angles
08:12:18 SkyScan query
08:12:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.85<-21990  Statuses=0008 0009
08:12:19 Msec=4500  True Az=112.995  Ze=-149.85  Az status=0008  Ze status=0009
08:12:19 Check angles
08:12:19 SkyScan query
08:12:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.09<-23406  Statuses=0008 0009
08:12:19 Msec=5250  True Az=112.995  Ze=-171.09  Az status=0008  Ze status=0009
08:12:20 Check angles
08:12:20 SkyScan query
08:12:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:12:20 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:12:20 Message to Master queued w/err=0: serial=187233 error=0
08:12:25 Received message from Master: op=Filter serial=187234
08:12:25 Color wheel filter change from 0 to 0
08:12:25 FLIGetFilterPos err=0  currentPosition=0
08:12:25 FLIGetStepsRemaining err=0  RemainingSteps=0
08:12:25 Filter is already there-color wheel unchanged
08:12:25 Received message from Master: op=Shutter serial=187235
08:12:25 Shutter LASER open
08:12:26 Received message from Camera: op=State serial=187237
08:12:26 GetSingleValue result=40  Value=cccccccc
08:12:26 SkyScan query
08:12:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:26 Parameters OK
08:12:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:26 Set A/D data flow result=40
08:12:26 Set A/D channel type result=40
08:12:26 Set A/D encoding result=40
08:12:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:26 Set channel filter=0.000000e+000  result=40
08:12:26 Config A/D  Result=40
08:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:26 Get A/D filter: -9.255963e+061  result=40
08:12:26 Get A/D value=-858993460  result=40
08:12:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:26 Parameters OK
08:12:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:26 Set A/D data flow result=40
08:12:26 Set A/D channel type result=40
08:12:26 Set A/D encoding result=40
08:12:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:26 Set channel filter=0.000000e+000  result=40
08:12:26 Config A/D  Result=40
08:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:26 Get A/D filter: -9.255963e+061  result=40
08:12:26 Get A/D value=-858993460  result=40
08:12:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:12:26 Aux=
08:12:26 Message to Camera, serial 187237 queued
08:12:35 Received message from Master: op=Shutter serial=187247
08:12:35 Shutter LASER close
08:12:35 Received message from Master: op=PointingHead serial=187251
08:12:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:12:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:12:35 Point started: ret=0
08:12:35 point_skyscan result=0
08:12:36 Check angles
08:12:36 SkyScan query
08:12:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.43<-21562  Statuses=0008 0009
08:12:37 Msec=0  True Az=112.995  Ze=-143.43  Az status=0008  Ze status=0009
08:12:37 Check angles
08:12:37 SkyScan query
08:12:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.46<-20164  Statuses=0008 0009
08:12:38 Msec=750  True Az=112.995  Ze=-122.46  Az status=0008  Ze status=0009
08:12:38 Check angles
08:12:38 SkyScan query
08:12:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.505<-18767  Statuses=0008 0009
08:12:38 Msec=1500  True Az=112.995  Ze=-101.505  Az status=0008  Ze status=0009
08:12:38 Check angles
08:12:38 SkyScan query
08:12:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.535<-17369  Statuses=0008 0009
08:12:39 Msec=2250  True Az=112.995  Ze=-80.535  Az status=0008  Ze status=0009
08:12:39 Check angles
08:12:39 SkyScan query
08:12:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.595<-15973  Statuses=0008 0009
08:12:40 Msec=3000  True Az=112.995  Ze=-59.595  Az status=0008  Ze status=0009
08:12:40 Check angles
08:12:40 SkyScan query
08:12:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.64<-14576  Statuses=0008 0009
08:12:41 Msec=3750  True Az=112.995  Ze=-38.64  Az status=0008  Ze status=0009
08:12:41 Check angles
08:12:41 SkyScan query
08:12:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.7<-13180  Statuses=0008 0009
08:12:41 Msec=4500  True Az=112.995  Ze=-17.7  Az status=0008  Ze status=0009
08:12:41 Check angles
08:12:41 SkyScan query
08:12:42 SkyScan query done: ret=0  az=112.995<-7533  ze=3.27<-11782  Statuses=0008 0009
08:12:42 Msec=5250  True Az=112.995  Ze=3.27  Az status=0008  Ze status=0009
08:12:42 Check angles
08:12:42 SkyScan query
08:12:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:12:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:12:43 Message to Master queued w/err=0: serial=187251 error=0
08:12:48 Received message from Master: op=Filter serial=187252
08:12:48 Color wheel filter change from 0 to 0
08:12:48 FLIGetFilterPos err=0  currentPosition=0
08:12:48 FLIGetStepsRemaining err=0  RemainingSteps=0
08:12:48 Filter is already there-color wheel unchanged
08:12:48 Received message from Master: op=Shutter serial=187253
08:12:48 Shutter LASER close
08:12:48 Received message from Camera: op=State serial=187255
08:12:48 GetSingleValue result=40  Value=cccccccc
08:12:48 SkyScan query
08:12:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:12:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:49 Parameters OK
08:12:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:49 Set A/D data flow result=40
08:12:49 Set A/D channel type result=40
08:12:49 Set A/D encoding result=40
08:12:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:49 Set channel filter=0.000000e+000  result=40
08:12:49 Config A/D  Result=40
08:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:49 Get A/D filter: -9.255963e+061  result=40
08:12:49 Get A/D value=-858993460  result=40
08:12:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:12:49 Parameters OK
08:12:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:12:49 Set A/D data flow result=40
08:12:49 Set A/D channel type result=40
08:12:49 Set A/D encoding result=40
08:12:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:12:49 Set channel filter=0.000000e+000  result=40
08:12:49 Config A/D  Result=40
08:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:12:49 Get A/D filter: -9.255963e+061  result=40
08:12:49 Get A/D value=-858993460  result=40
08:12:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:12:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:12:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:12:49 Aux=
08:12:49 Message to Camera, serial 187255 queued
08:13:26 Received message from Master: op=PointingHead serial=187268
08:13:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:13:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:13:26 Point started: ret=0
08:13:26 point_skyscan result=0
08:13:27 Check angles
08:13:27 SkyScan query
08:13:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:13:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:13:27 Message to Master queued w/err=0: serial=187268 error=0
08:13:32 Received message from Master: op=Filter serial=187269
08:13:32 Color wheel filter change from 0 to 0
08:13:32 FLIGetFilterPos err=0  currentPosition=0
08:13:32 FLIGetStepsRemaining err=0  RemainingSteps=0
08:13:32 Filter is already there-color wheel unchanged
08:13:32 Received message from Master: op=Shutter serial=187270
08:13:32 Shutter LASER close
08:13:32 Received message from Camera: op=State serial=187272
08:13:32 GetSingleValue result=40  Value=cccccccc
08:13:32 SkyScan query
08:13:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:13:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:13:33 Parameters OK
08:13:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:13:33 Set A/D data flow result=40
08:13:33 Set A/D channel type result=40
08:13:33 Set A/D encoding result=40
08:13:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:13:33 Set channel filter=0.000000e+000  result=40
08:13:33 Config A/D  Result=40
08:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:13:33 Get A/D filter: -9.255963e+061  result=40
08:13:33 Get A/D value=-858993460  result=40
08:13:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:13:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:13:33 Parameters OK
08:13:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:13:33 Set A/D data flow result=40
08:13:33 Set A/D channel type result=40
08:13:33 Set A/D encoding result=40
08:13:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:13:33 Set channel filter=0.000000e+000  result=40
08:13:33 Config A/D  Result=40
08:13:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:13:33 Get A/D filter: -9.255963e+061  result=40
08:13:33 Get A/D value=-858993460  result=40
08:13:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:13:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:13:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:13:33 Aux=
08:13:33 Message to Camera, serial 187272 queued
08:14:10 Received message from Master: op=PointingHead serial=187285
08:14:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:14:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:14:10 Point started: ret=0
08:14:10 point_skyscan result=0
08:14:11 Check angles
08:14:11 SkyScan query
08:14:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:14:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:14:12 Message to Master queued w/err=0: serial=187285 error=0
[UTC 2019-3-9  08:14:17]
08:14:17 Received message from Master: op=Filter serial=187286
08:14:17 Color wheel filter change from 0 to 0
08:14:17 FLIGetFilterPos err=0  currentPosition=0
08:14:17 FLIGetStepsRemaining err=0  RemainingSteps=0
08:14:17 Filter is already there-color wheel unchanged
08:14:17 Received message from Master: op=Shutter serial=187287
08:14:17 Shutter LASER close
08:14:17 Received message from Camera: op=State serial=187289
08:14:17 GetSingleValue result=40  Value=cccccccc
08:14:17 SkyScan query
08:14:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:14:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:14:17 Parameters OK
08:14:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:14:17 Set A/D data flow result=40
08:14:17 Set A/D channel type result=40
08:14:17 Set A/D encoding result=40
08:14:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:14:17 Set channel filter=0.000000e+000  result=40
08:14:17 Config A/D  Result=40
08:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:14:17 Get A/D filter: -9.255963e+061  result=40
08:14:17 Get A/D value=-858993460  result=40
08:14:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:14:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:14:17 Parameters OK
08:14:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:14:17 Set A/D data flow result=40
08:14:17 Set A/D channel type result=40
08:14:17 Set A/D encoding result=40
08:14:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:14:17 Set channel filter=0.000000e+000  result=40
08:14:17 Config A/D  Result=40
08:14:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:14:17 Get A/D filter: -9.255963e+061  result=40
08:14:17 Get A/D value=-858993460  result=40
08:14:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:14:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:14:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:14:17 Aux=
08:14:17 Message to Camera, serial 187289 queued
08:14:54 Received message from Master: op=PointingHead serial=187302
08:14:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:14:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:14:55 Point started: ret=0
08:14:55 point_skyscan result=0
08:14:55 Check angles
08:14:55 SkyScan query
08:14:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:14:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:14:56 Message to Master queued w/err=0: serial=187302 error=0
08:15:01 Received message from Master: op=Filter serial=187303
08:15:01 Color wheel filter change from 0 to 0
08:15:01 FLIGetFilterPos err=0  currentPosition=0
08:15:01 FLIGetStepsRemaining err=0  RemainingSteps=0
08:15:01 Filter is already there-color wheel unchanged
08:15:01 Received message from Master: op=Shutter serial=187304
08:15:01 Shutter LASER close
08:15:01 Received message from Camera: op=State serial=187306
08:15:01 GetSingleValue result=40  Value=cccccccc
08:15:01 SkyScan query
08:15:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:15:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:15:02 Parameters OK
08:15:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:15:02 Set A/D data flow result=40
08:15:02 Set A/D channel type result=40
08:15:02 Set A/D encoding result=40
08:15:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:15:02 Set channel filter=0.000000e+000  result=40
08:15:02 Config A/D  Result=40
08:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:15:02 Get A/D filter: -9.255963e+061  result=40
08:15:02 Get A/D value=-858993460  result=40
08:15:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:15:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:15:02 Parameters OK
08:15:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:15:02 Set A/D data flow result=40
08:15:02 Set A/D channel type result=40
08:15:02 Set A/D encoding result=40
08:15:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:15:02 Set channel filter=0.000000e+000  result=40
08:15:02 Config A/D  Result=40
08:15:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:15:02 Get A/D filter: -9.255963e+061  result=40
08:15:02 Get A/D value=-858993460  result=40
08:15:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:15:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:15:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:15:02 Aux=
08:15:02 Message to Camera, serial 187306 queued
08:15:39 Received message from Master: op=PointingHead serial=187319
08:15:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:15:39 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:15:39 Point started: ret=0
08:15:39 point_skyscan result=0
08:15:40 Check angles
08:15:40 SkyScan query
08:15:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
08:15:40 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
08:15:40 Check angles
08:15:40 SkyScan query
08:15:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.955<-14997  Statuses=0008 0009
08:15:41 Msec=750  True Az=112.995  Ze=-44.955  Az status=0008  Ze status=0009
08:15:41 Check angles
08:15:41 SkyScan query
08:15:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.895<-16393  Statuses=0008 0009
08:15:42 Msec=1500  True Az=112.995  Ze=-65.895  Az status=0008  Ze status=0009
08:15:42 Check angles
08:15:42 SkyScan query
08:15:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.835<-17789  Statuses=0008 0009
08:15:42 Msec=2250  True Az=112.995  Ze=-86.835  Az status=0008  Ze status=0009
08:15:43 Check angles
08:15:43 SkyScan query
08:15:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.79<-19186  Statuses=0008 0009
08:15:43 Msec=3000  True Az=112.995  Ze=-107.79  Az status=0008  Ze status=0009
08:15:43 Check angles
08:15:43 SkyScan query
08:15:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.73<-20582  Statuses=0008 0009
08:15:44 Msec=3750  True Az=112.995  Ze=-128.73  Az status=0008  Ze status=0009
08:15:44 Check angles
08:15:44 SkyScan query
08:15:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.135<-22009  Statuses=0008 0009
08:15:45 Msec=4500  True Az=112.995  Ze=-150.135  Az status=0008  Ze status=0009
08:15:45 Check angles
08:15:45 SkyScan query
08:15:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.97<-23398  Statuses=0008 0009
08:15:45 Msec=5250  True Az=112.995  Ze=-170.97  Az status=0008  Ze status=0009
08:15:46 Check angles
08:15:46 SkyScan query
08:15:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:15:46 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:15:46 Message to Master queued w/err=0: serial=187319 error=0
08:15:51 Received message from Master: op=Filter serial=187320
08:15:51 Color wheel filter change from 0 to 0
08:15:51 FLIGetFilterPos err=0  currentPosition=0
08:15:51 FLIGetStepsRemaining err=0  RemainingSteps=0
08:15:51 Filter is already there-color wheel unchanged
08:15:51 Received message from Master: op=Shutter serial=187321
08:15:51 Shutter LASER open
08:15:52 Received message from Camera: op=State serial=187323
08:15:52 GetSingleValue result=40  Value=cccccccc
08:15:52 SkyScan query
08:15:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:15:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:15:52 Parameters OK
08:15:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:15:52 Set A/D data flow result=40
08:15:52 Set A/D channel type result=40
08:15:52 Set A/D encoding result=40
08:15:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:15:52 Set channel filter=0.000000e+000  result=40
08:15:52 Config A/D  Result=40
08:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:15:52 Get A/D filter: -9.255963e+061  result=40
08:15:52 Get A/D value=-858993460  result=40
08:15:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:15:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:15:52 Parameters OK
08:15:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:15:52 Set A/D data flow result=40
08:15:52 Set A/D channel type result=40
08:15:52 Set A/D encoding result=40
08:15:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:15:52 Set channel filter=0.000000e+000  result=40
08:15:52 Config A/D  Result=40
08:15:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:15:52 Get A/D filter: -9.255963e+061  result=40
08:15:52 Get A/D value=-858993460  result=40
08:15:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:15:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:15:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:15:52 Aux=
08:15:52 Message to Camera, serial 187323 queued
08:16:01 Received message from Master: op=Shutter serial=187333
08:16:01 Shutter LASER close
08:16:01 Received message from Master: op=PointingHead serial=187337
08:16:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:16:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:16:02 Point started: ret=0
08:16:02 point_skyscan result=0
08:16:02 Check angles
08:16:02 SkyScan query
08:16:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
08:16:03 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
08:16:03 Check angles
08:16:03 SkyScan query
08:16:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.605<-20107  Statuses=0008 0009
08:16:04 Msec=750  True Az=112.995  Ze=-121.605  Az status=0008  Ze status=0009
08:16:04 Check angles
08:16:04 SkyScan query
08:16:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.665<-18711  Statuses=0008 0009
08:16:04 Msec=1500  True Az=112.995  Ze=-100.665  Az status=0008  Ze status=0009
08:16:05 Check angles
08:16:05 SkyScan query
08:16:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.71<-17314  Statuses=0008 0009
08:16:05 Msec=2250  True Az=112.995  Ze=-79.71  Az status=0008  Ze status=0009
08:16:05 Check angles
08:16:05 SkyScan query
08:16:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.755<-15917  Statuses=0008 0009
08:16:06 Msec=3000  True Az=112.995  Ze=-58.755  Az status=0008  Ze status=0009
08:16:06 Check angles
08:16:06 SkyScan query
08:16:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.785<-14519  Statuses=0008 0009
08:16:07 Msec=3750  True Az=112.995  Ze=-37.785  Az status=0008  Ze status=0009
08:16:07 Check angles
08:16:07 SkyScan query
08:16:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.815<-13121  Statuses=0008 0009
08:16:07 Msec=4500  True Az=112.995  Ze=-16.815  Az status=0008  Ze status=0009
08:16:08 Check angles
08:16:08 SkyScan query
08:16:08 SkyScan query done: ret=0  az=112.995<-7533  ze=4.11<-11726  Statuses=0008 0009
08:16:08 Msec=5250  True Az=112.995  Ze=4.11  Az status=0008  Ze status=0009
08:16:08 Check angles
08:16:08 SkyScan query
08:16:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:16:09 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:16:09 Message to Master queued w/err=0: serial=187337 error=0
08:16:14 Received message from Master: op=Filter serial=187338
08:16:14 Color wheel filter change from 0 to 0
08:16:14 FLIGetFilterPos err=0  currentPosition=0
08:16:14 FLIGetStepsRemaining err=0  RemainingSteps=0
08:16:14 Filter is already there-color wheel unchanged
08:16:14 Received message from Master: op=Shutter serial=187339
08:16:14 Shutter LASER close
08:16:14 Received message from Camera: op=State serial=187341
08:16:14 GetSingleValue result=40  Value=cccccccc
08:16:14 SkyScan query
08:16:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:16:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:15 Parameters OK
08:16:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:15 Set A/D data flow result=40
08:16:15 Set A/D channel type result=40
08:16:15 Set A/D encoding result=40
08:16:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:15 Set channel filter=0.000000e+000  result=40
08:16:15 Config A/D  Result=40
08:16:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:15 Get A/D filter: -9.255963e+061  result=40
08:16:15 Get A/D value=-858993460  result=40
08:16:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:15 Parameters OK
08:16:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:15 Set A/D data flow result=40
08:16:15 Set A/D channel type result=40
08:16:15 Set A/D encoding result=40
08:16:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:15 Set channel filter=0.000000e+000  result=40
08:16:15 Config A/D  Result=40
08:16:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:15 Get A/D filter: -9.255963e+061  result=40
08:16:15 Get A/D value=-858993460  result=40
08:16:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:16:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:16:15 Aux=
08:16:15 Message to Camera, serial 187341 queued
08:16:52 Received message from Master: op=PointingHead serial=187354
08:16:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:16:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:16:52 Point started: ret=0
08:16:52 point_skyscan result=0
08:16:53 Check angles
08:16:53 SkyScan query
08:16:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:16:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:16:53 Message to Master queued w/err=0: serial=187354 error=0
08:16:58 Received message from Master: op=Filter serial=187355
08:16:58 Color wheel filter change from 0 to 0
08:16:58 FLIGetFilterPos err=0  currentPosition=0
08:16:58 FLIGetStepsRemaining err=0  RemainingSteps=0
08:16:58 Filter is already there-color wheel unchanged
08:16:58 Received message from Master: op=Shutter serial=187356
08:16:58 Shutter LASER close
08:16:59 Received message from Camera: op=State serial=187358
08:16:59 GetSingleValue result=40  Value=cccccccc
08:16:59 SkyScan query
08:16:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:16:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:59 Parameters OK
08:16:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:59 Set A/D data flow result=40
08:16:59 Set A/D channel type result=40
08:16:59 Set A/D encoding result=40
08:16:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:59 Set channel filter=0.000000e+000  result=40
08:16:59 Config A/D  Result=40
08:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:59 Get A/D filter: -9.255963e+061  result=40
08:16:59 Get A/D value=-858993460  result=40
08:16:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:16:59 Parameters OK
08:16:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:16:59 Set A/D data flow result=40
08:16:59 Set A/D channel type result=40
08:16:59 Set A/D encoding result=40
08:16:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:16:59 Set channel filter=0.000000e+000  result=40
08:16:59 Config A/D  Result=40
08:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:16:59 Get A/D filter: -9.255963e+061  result=40
08:16:59 Get A/D value=-858993460  result=40
08:16:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:16:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:16:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:16:59 Aux=
08:16:59 Message to Camera, serial 187358 queued
08:17:36 Received message from Master: op=PointingHead serial=187371
08:17:36 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:17:36 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:17:36 Point started: ret=0
08:17:36 point_skyscan result=0
08:17:37 Check angles
08:17:37 SkyScan query
08:17:38 SkyScan query done: ret=0  az=136.395<-9093  ze=-6.51<-12434  Statuses=0009 0008
08:17:38 Msec=0  True Az=136.395  Ze=-6.51  Az status=0009  Ze status=0008
08:17:38 Check angles
08:17:38 SkyScan query
08:17:38 SkyScan query done: ret=0  az=153.915<-10261  ze=-6.495<-12433  Statuses=0009 0008
08:17:38 Msec=750  True Az=153.915  Ze=-6.495  Az status=0009  Ze status=0008
08:17:39 Check angles
08:17:39 SkyScan query
08:17:39 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
08:17:39 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
08:17:39 Check angles
08:17:39 SkyScan query
08:17:40 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:17:40 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:17:40 Message to Master queued w/err=0: serial=187371 error=0
08:17:45 Received message from Master: op=Filter serial=187372
08:17:45 Color wheel filter change from 0 to 0
08:17:45 FLIGetFilterPos err=0  currentPosition=0
08:17:45 FLIGetStepsRemaining err=0  RemainingSteps=0
08:17:45 Filter is already there-color wheel unchanged
08:17:45 Received message from Master: op=Shutter serial=187373
08:17:45 Shutter LASER close
08:17:45 Received message from Camera: op=State serial=187375
08:17:45 GetSingleValue result=40  Value=cccccccc
08:17:45 SkyScan query
08:17:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:17:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:17:46 Parameters OK
08:17:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:17:46 Set A/D data flow result=40
08:17:46 Set A/D channel type result=40
08:17:46 Set A/D encoding result=40
08:17:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:17:46 Set channel filter=0.000000e+000  result=40
08:17:46 Config A/D  Result=40
08:17:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:17:46 Get A/D filter: -9.255963e+061  result=40
08:17:46 Get A/D value=-858993460  result=40
08:17:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:17:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:17:46 Parameters OK
08:17:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:17:46 Set A/D data flow result=40
08:17:46 Set A/D channel type result=40
08:17:46 Set A/D encoding result=40
08:17:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:17:46 Set channel filter=0.000000e+000  result=40
08:17:46 Config A/D  Result=40
08:17:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:17:46 Get A/D filter: -9.255963e+061  result=40
08:17:46 Get A/D value=-858993460  result=40
08:17:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:17:46 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:17:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:17:46 Aux=
08:17:46 Message to Camera, serial 187375 queued
08:18:23 Received message from Master: op=PointingHead serial=187388
08:18:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:18:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:18:23 Point started: ret=0
08:18:23 point_skyscan result=0
08:18:24 Check angles
08:18:24 SkyScan query
08:18:24 SkyScan query done: ret=0  az=153.06<-10204  ze=6.51<-11566  Statuses=0009 0008
08:18:24 Msec=0  True Az=153.06  Ze=6.51  Az status=0009  Ze status=0008
08:18:24 Check angles
08:18:24 SkyScan query
08:18:25 SkyScan query done: ret=0  az=135.6<-9040  ze=6.495<-11567  Statuses=0009 0008
08:18:25 Msec=750  True Az=135.6  Ze=6.495  Az status=0009  Ze status=0008
08:18:25 Check angles
08:18:25 SkyScan query
08:18:26 SkyScan query done: ret=0  az=118.125<-7875  ze=6.495<-11567  Statuses=0009 0008
08:18:26 Msec=1500  True Az=118.125  Ze=6.495  Az status=0009  Ze status=0008
08:18:26 Check angles
08:18:26 SkyScan query
08:18:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:18:26 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:18:26 Message to Master queued w/err=0: serial=187388 error=0
08:18:31 Received message from Master: op=Filter serial=187389
08:18:31 Color wheel filter change from 0 to 0
08:18:31 FLIGetFilterPos err=0  currentPosition=0
08:18:31 FLIGetStepsRemaining err=0  RemainingSteps=0
08:18:31 Filter is already there-color wheel unchanged
08:18:32 Received message from Master: op=Shutter serial=187390
08:18:32 Shutter LASER close
08:18:32 Received message from Camera: op=State serial=187392
08:18:32 GetSingleValue result=40  Value=cccccccc
08:18:32 SkyScan query
08:18:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:18:32 Parameters OK
08:18:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:18:32 Set A/D data flow result=40
08:18:32 Set A/D channel type result=40
08:18:32 Set A/D encoding result=40
08:18:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:18:32 Set channel filter=0.000000e+000  result=40
08:18:32 Config A/D  Result=40
08:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:18:32 Get A/D filter: -9.255963e+061  result=40
08:18:32 Get A/D value=-858993460  result=40
08:18:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:18:32 Parameters OK
08:18:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:18:32 Set A/D data flow result=40
08:18:32 Set A/D channel type result=40
08:18:32 Set A/D encoding result=40
08:18:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:18:32 Set channel filter=0.000000e+000  result=40
08:18:32 Config A/D  Result=40
08:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:18:32 Get A/D filter: -9.255963e+061  result=40
08:18:32 Get A/D value=-858993460  result=40
08:18:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:18:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:18:32 Aux=
08:18:32 Message to Camera, serial 187392 queued
08:19:09 Received message from Master: op=PointingHead serial=187405
08:19:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:19:09 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:19:09 Point started: ret=0
08:19:09 point_skyscan result=0
08:19:10 Check angles
08:19:10 SkyScan query
08:19:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.835<-13589  Statuses=0008 0009
08:19:11 Msec=0  True Az=112.995  Ze=-23.835  Az status=0008  Ze status=0009
08:19:11 Check angles
08:19:11 SkyScan query
08:19:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
08:19:12 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
08:19:12 Check angles
08:19:12 SkyScan query
08:19:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
08:19:12 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
08:19:12 Check angles
08:19:12 SkyScan query
08:19:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
08:19:13 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
08:19:13 Check angles
08:19:13 SkyScan query
08:19:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
08:19:14 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
08:19:14 Check angles
08:19:14 SkyScan query
08:19:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.565<-20571  Statuses=0008 0009
08:19:15 Msec=3750  True Az=112.995  Ze=-128.565  Az status=0008  Ze status=0009
08:19:15 Check angles
08:19:15 SkyScan query
08:19:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.97<-21998  Statuses=0008 0009
08:19:15 Msec=4500  True Az=112.995  Ze=-149.97  Az status=0008  Ze status=0009
08:19:15 Check angles
08:19:15 SkyScan query
08:19:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
08:19:16 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
08:19:16 Check angles
08:19:16 SkyScan query
08:19:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:19:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:19:17 Message to Master queued w/err=0: serial=187405 error=0
08:19:22 Received message from Master: op=Filter serial=187406
08:19:22 Color wheel filter change from 0 to 0
08:19:22 FLIGetFilterPos err=0  currentPosition=0
08:19:22 FLIGetStepsRemaining err=0  RemainingSteps=0
08:19:22 Filter is already there-color wheel unchanged
08:19:22 Received message from Master: op=Shutter serial=187407
08:19:22 Shutter LASER open
08:19:22 Received message from Camera: op=State serial=187409
08:19:22 GetSingleValue result=40  Value=cccccccc
08:19:22 SkyScan query
08:19:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:19:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:23 Parameters OK
08:19:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:23 Set A/D data flow result=40
08:19:23 Set A/D channel type result=40
08:19:23 Set A/D encoding result=40
08:19:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:23 Set channel filter=0.000000e+000  result=40
08:19:23 Config A/D  Result=40
08:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:23 Get A/D filter: -9.255963e+061  result=40
08:19:23 Get A/D value=-858993460  result=40
08:19:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:23 Parameters OK
08:19:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:23 Set A/D data flow result=40
08:19:23 Set A/D channel type result=40
08:19:23 Set A/D encoding result=40
08:19:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:23 Set channel filter=0.000000e+000  result=40
08:19:23 Config A/D  Result=40
08:19:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:23 Get A/D filter: -9.255963e+061  result=40
08:19:23 Get A/D value=-858993460  result=40
08:19:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:19:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:19:23 Aux=
08:19:23 Message to Camera, serial 187409 queued
08:19:31 Received message from Master: op=Shutter serial=187419
08:19:31 Shutter LASER close
08:19:32 Received message from Master: op=PointingHead serial=187423
08:19:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:19:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:19:32 Point started: ret=0
08:19:32 point_skyscan result=0
08:19:33 Check angles
08:19:33 SkyScan query
08:19:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.025<-21535  Statuses=0008 0009
08:19:33 Msec=0  True Az=112.995  Ze=-143.025  Az status=0008  Ze status=0009
08:19:33 Check angles
08:19:33 SkyScan query
08:19:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.635<-20109  Statuses=0008 0009
08:19:34 Msec=750  True Az=112.995  Ze=-121.635  Az status=0008  Ze status=0009
08:19:34 Check angles
08:19:34 SkyScan query
08:19:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.68<-18712  Statuses=0008 0009
08:19:35 Msec=1500  True Az=112.995  Ze=-100.68  Az status=0008  Ze status=0009
08:19:35 Check angles
08:19:35 SkyScan query
08:19:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.725<-17315  Statuses=0008 0009
08:19:36 Msec=2250  True Az=112.995  Ze=-79.725  Az status=0008  Ze status=0009
08:19:36 Check angles
08:19:36 SkyScan query
08:19:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.785<-15919  Statuses=0008 0009
08:19:36 Msec=3000  True Az=112.995  Ze=-58.785  Az status=0008  Ze status=0009
08:19:36 Check angles
08:19:36 SkyScan query
08:19:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.815<-14521  Statuses=0008 0009
08:19:37 Msec=3750  True Az=112.995  Ze=-37.815  Az status=0008  Ze status=0009
08:19:37 Check angles
08:19:37 SkyScan query
08:19:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.845<-13123  Statuses=0008 0009
08:19:38 Msec=4500  True Az=112.995  Ze=-16.845  Az status=0008  Ze status=0009
08:19:38 Check angles
08:19:38 SkyScan query
08:19:39 SkyScan query done: ret=0  az=112.995<-7533  ze=4.095<-11727  Statuses=0008 0009
08:19:39 Msec=5250  True Az=112.995  Ze=4.095  Az status=0008  Ze status=0009
08:19:39 Check angles
08:19:39 SkyScan query
08:19:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:19:39 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:19:39 Message to Master queued w/err=0: serial=187423 error=0
08:19:44 Received message from Master: op=Filter serial=187424
08:19:44 Color wheel filter change from 0 to 0
08:19:44 FLIGetFilterPos err=0  currentPosition=0
08:19:44 FLIGetStepsRemaining err=0  RemainingSteps=0
08:19:44 Filter is already there-color wheel unchanged
08:19:44 Received message from Master: op=Shutter serial=187425
08:19:44 Shutter LASER close
08:19:45 Received message from Camera: op=State serial=187427
08:19:45 GetSingleValue result=40  Value=cccccccc
08:19:45 SkyScan query
08:19:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:19:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:45 Parameters OK
08:19:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:45 Set A/D data flow result=40
08:19:45 Set A/D channel type result=40
08:19:45 Set A/D encoding result=40
08:19:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:45 Set channel filter=0.000000e+000  result=40
08:19:45 Config A/D  Result=40
08:19:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:45 Get A/D filter: -9.255963e+061  result=40
08:19:45 Get A/D value=-858993460  result=40
08:19:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:19:45 Parameters OK
08:19:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:19:45 Set A/D data flow result=40
08:19:45 Set A/D channel type result=40
08:19:45 Set A/D encoding result=40
08:19:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:19:45 Set channel filter=0.000000e+000  result=40
08:19:45 Config A/D  Result=40
08:19:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:19:45 Get A/D filter: -9.255963e+061  result=40
08:19:45 Get A/D value=-858993460  result=40
08:19:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:19:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:19:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:19:45 Aux=
08:19:45 Message to Camera, serial 187427 queued
08:20:22 Received message from Master: op=PointingHead serial=187440
08:20:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:20:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:20:22 Point started: ret=0
08:20:22 point_skyscan result=0
08:20:23 Check angles
08:20:23 SkyScan query
08:20:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:20:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:20:24 Message to Master queued w/err=0: serial=187440 error=0
08:20:29 Received message from Master: op=Filter serial=187441
08:20:29 Color wheel filter change from 0 to 0
08:20:29 FLIGetFilterPos err=0  currentPosition=0
08:20:29 FLIGetStepsRemaining err=0  RemainingSteps=0
08:20:29 Filter is already there-color wheel unchanged
08:20:29 Received message from Master: op=Shutter serial=187442
08:20:29 Shutter LASER close
08:20:29 Received message from Camera: op=State serial=187444
08:20:29 GetSingleValue result=40  Value=cccccccc
08:20:29 SkyScan query
08:20:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:20:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:20:30 Parameters OK
08:20:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:20:30 Set A/D data flow result=40
08:20:30 Set A/D channel type result=40
08:20:30 Set A/D encoding result=40
08:20:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:20:30 Set channel filter=0.000000e+000  result=40
08:20:30 Config A/D  Result=40
08:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:20:30 Get A/D filter: -9.255963e+061  result=40
08:20:30 Get A/D value=-858993460  result=40
08:20:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:20:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:20:30 Parameters OK
08:20:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:20:30 Set A/D data flow result=40
08:20:30 Set A/D channel type result=40
08:20:30 Set A/D encoding result=40
08:20:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:20:30 Set channel filter=0.000000e+000  result=40
08:20:30 Config A/D  Result=40
08:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:20:30 Get A/D filter: -9.255963e+061  result=40
08:20:30 Get A/D value=-858993460  result=40
08:20:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:20:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:20:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:20:30 Aux=
08:20:30 Message to Camera, serial 187444 queued
08:21:06 Received message from Master: op=PointingHead serial=187457
08:21:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:21:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:21:07 Point started: ret=0
08:21:07 point_skyscan result=0
08:21:07 Check angles
08:21:07 SkyScan query
08:21:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:21:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:21:08 Message to Master queued w/err=0: serial=187457 error=0
08:21:13 Received message from Master: op=Filter serial=187458
08:21:13 Color wheel filter change from 0 to 0
08:21:13 FLIGetFilterPos err=0  currentPosition=0
08:21:13 FLIGetStepsRemaining err=0  RemainingSteps=0
08:21:13 Filter is already there-color wheel unchanged
08:21:13 Received message from Master: op=Shutter serial=187459
08:21:13 Shutter LASER close
08:21:13 Received message from Camera: op=State serial=187461
08:21:13 GetSingleValue result=40  Value=cccccccc
08:21:13 SkyScan query
08:21:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:21:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:21:14 Parameters OK
08:21:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:21:14 Set A/D data flow result=40
08:21:14 Set A/D channel type result=40
08:21:14 Set A/D encoding result=40
08:21:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:21:14 Set channel filter=0.000000e+000  result=40
08:21:14 Config A/D  Result=40
08:21:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:21:14 Get A/D filter: -9.255963e+061  result=40
08:21:14 Get A/D value=-858993460  result=40
08:21:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:21:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:21:14 Parameters OK
08:21:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:21:14 Set A/D data flow result=40
08:21:14 Set A/D channel type result=40
08:21:14 Set A/D encoding result=40
08:21:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:21:14 Set channel filter=0.000000e+000  result=40
08:21:14 Config A/D  Result=40
08:21:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:21:14 Get A/D filter: -9.255963e+061  result=40
08:21:14 Get A/D value=-858993460  result=40
08:21:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:21:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:21:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:21:14 Aux=
08:21:14 Message to Camera, serial 187461 queued
08:21:51 Received message from Master: op=PointingHead serial=187474
08:21:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:21:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:21:51 Point started: ret=0
08:21:51 point_skyscan result=0
08:21:52 Check angles
08:21:52 SkyScan query
08:21:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:21:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:21:52 Message to Master queued w/err=0: serial=187474 error=0
08:21:57 Received message from Master: op=Filter serial=187475
08:21:57 Color wheel filter change from 0 to 0
08:21:57 FLIGetFilterPos err=0  currentPosition=0
08:21:57 FLIGetStepsRemaining err=0  RemainingSteps=0
08:21:57 Filter is already there-color wheel unchanged
08:21:57 Received message from Master: op=Shutter serial=187476
08:21:57 Shutter LASER close
08:21:58 Received message from Camera: op=State serial=187478
08:21:58 GetSingleValue result=40  Value=cccccccc
08:21:58 SkyScan query
08:21:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:21:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:21:58 Parameters OK
08:21:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:21:58 Set A/D data flow result=40
08:21:58 Set A/D channel type result=40
08:21:58 Set A/D encoding result=40
08:21:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:21:58 Set channel filter=0.000000e+000  result=40
08:21:58 Config A/D  Result=40
08:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:21:58 Get A/D filter: -9.255963e+061  result=40
08:21:58 Get A/D value=-858993460  result=40
08:21:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:21:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:21:58 Parameters OK
08:21:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:21:58 Set A/D data flow result=40
08:21:58 Set A/D channel type result=40
08:21:58 Set A/D encoding result=40
08:21:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:21:58 Set channel filter=0.000000e+000  result=40
08:21:58 Config A/D  Result=40
08:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:21:58 Get A/D filter: -9.255963e+061  result=40
08:21:58 Get A/D value=-858993460  result=40
08:21:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:21:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:21:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:21:58 Aux=
08:21:58 Message to Camera, serial 187478 queued
08:22:35 Received message from Master: op=PointingHead serial=187491
08:22:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:22:35 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:22:35 Point started: ret=0
08:22:35 point_skyscan result=0
08:22:36 Check angles
08:22:36 SkyScan query
08:22:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.745<-13583  Statuses=0008 0009
08:22:37 Msec=0  True Az=112.995  Ze=-23.745  Az status=0008  Ze status=0009
08:22:37 Check angles
08:22:37 SkyScan query
08:22:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.135<-15009  Statuses=0008 0009
08:22:37 Msec=750  True Az=112.995  Ze=-45.135  Az status=0008  Ze status=0009
08:22:38 Check angles
08:22:38 SkyScan query
08:22:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.09<-16406  Statuses=0008 0009
08:22:38 Msec=1500  True Az=112.995  Ze=-66.09  Az status=0008  Ze status=0009
08:22:38 Check angles
08:22:38 SkyScan query
08:22:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.03<-17802  Statuses=0008 0009
08:22:39 Msec=2250  True Az=112.995  Ze=-87.03  Az status=0008  Ze status=0009
08:22:39 Check angles
08:22:39 SkyScan query
08:22:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.42<-19228  Statuses=0008 0009
08:22:40 Msec=3000  True Az=112.995  Ze=-108.42  Az status=0008  Ze status=0009
08:22:40 Check angles
08:22:40 SkyScan query
08:22:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.375<-20625  Statuses=0008 0009
08:22:40 Msec=3750  True Az=112.995  Ze=-129.375  Az status=0008  Ze status=0009
08:22:41 Check angles
08:22:41 SkyScan query
08:22:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.33<-22022  Statuses=0008 0009
08:22:41 Msec=4500  True Az=112.995  Ze=-150.33  Az status=0008  Ze status=0009
08:22:41 Check angles
08:22:41 SkyScan query
08:22:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.435<-23429  Statuses=0008 0009
08:22:42 Msec=5250  True Az=112.995  Ze=-171.435  Az status=0008  Ze status=0009
08:22:42 Check angles
08:22:42 SkyScan query
08:22:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:22:43 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:22:43 Message to Master queued w/err=0: serial=187491 error=0
08:22:48 Received message from Master: op=Filter serial=187492
08:22:48 Color wheel filter change from 0 to 0
08:22:48 FLIGetFilterPos err=0  currentPosition=0
08:22:48 FLIGetStepsRemaining err=0  RemainingSteps=0
08:22:48 Filter is already there-color wheel unchanged
08:22:48 Received message from Master: op=Shutter serial=187493
08:22:48 Shutter LASER open
08:22:48 Received message from Camera: op=State serial=187495
08:22:48 GetSingleValue result=40  Value=cccccccc
08:22:48 SkyScan query
08:22:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:22:49 Parameters OK
08:22:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:22:49 Set A/D data flow result=40
08:22:49 Set A/D channel type result=40
08:22:49 Set A/D encoding result=40
08:22:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:22:49 Set channel filter=0.000000e+000  result=40
08:22:49 Config A/D  Result=40
08:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:22:49 Get A/D filter: -9.255963e+061  result=40
08:22:49 Get A/D value=-858993460  result=40
08:22:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:22:49 Parameters OK
08:22:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:22:49 Set A/D data flow result=40
08:22:49 Set A/D channel type result=40
08:22:49 Set A/D encoding result=40
08:22:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:22:49 Set channel filter=0.000000e+000  result=40
08:22:49 Config A/D  Result=40
08:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:22:49 Get A/D filter: -9.255963e+061  result=40
08:22:49 Get A/D value=-858993460  result=40
08:22:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:22:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:22:49 Aux=
08:22:49 Message to Camera, serial 187495 queued
08:22:57 Received message from Master: op=Shutter serial=187505
08:22:57 Shutter LASER close
08:22:58 Received message from Master: op=PointingHead serial=187509
08:22:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:22:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:22:58 Point started: ret=0
08:22:58 point_skyscan result=0
08:22:59 Check angles
08:22:59 SkyScan query
08:22:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.71<-21514  Statuses=0008 0009
08:22:59 Msec=0  True Az=112.995  Ze=-142.71  Az status=0008  Ze status=0009
08:23:00 Check angles
08:23:00 SkyScan query
08:23:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.74<-20116  Statuses=0008 0009
08:23:00 Msec=750  True Az=112.995  Ze=-121.74  Az status=0008  Ze status=0009
08:23:00 Check angles
08:23:00 SkyScan query
08:23:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.365<-18691  Statuses=0008 0009
08:23:01 Msec=1500  True Az=112.995  Ze=-100.365  Az status=0008  Ze status=0009
08:23:01 Check angles
08:23:01 SkyScan query
08:23:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.395<-17293  Statuses=0008 0009
08:23:02 Msec=2250  True Az=112.995  Ze=-79.395  Az status=0008  Ze status=0009
08:23:02 Check angles
08:23:02 SkyScan query
08:23:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.44<-15896  Statuses=0008 0009
08:23:02 Msec=3000  True Az=112.995  Ze=-58.44  Az status=0008  Ze status=0009
08:23:03 Check angles
08:23:03 SkyScan query
08:23:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.065<-14471  Statuses=0008 0009
08:23:03 Msec=3750  True Az=112.995  Ze=-37.065  Az status=0008  Ze status=0009
08:23:03 Check angles
08:23:03 SkyScan query
08:23:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.095<-13073  Statuses=0008 0009
08:23:04 Msec=4500  True Az=112.995  Ze=-16.095  Az status=0008  Ze status=0009
08:23:04 Check angles
08:23:04 SkyScan query
08:23:05 SkyScan query done: ret=0  az=112.995<-7533  ze=4.68<-11688  Statuses=0008 0009
08:23:05 Msec=5250  True Az=112.995  Ze=4.68  Az status=0008  Ze status=0009
08:23:05 Check angles
08:23:05 SkyScan query
08:23:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:23:05 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:23:05 Message to Master queued w/err=0: serial=187509 error=0
08:23:10 Received message from Master: op=Filter serial=187510
08:23:10 Color wheel filter change from 0 to 0
08:23:10 FLIGetFilterPos err=0  currentPosition=0
08:23:10 FLIGetStepsRemaining err=0  RemainingSteps=0
08:23:10 Filter is already there-color wheel unchanged
08:23:11 Received message from Master: op=Shutter serial=187511
08:23:11 Shutter LASER close
08:23:11 Received message from Camera: op=State serial=187513
08:23:11 GetSingleValue result=40  Value=cccccccc
08:23:11 SkyScan query
08:23:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:23:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:11 Parameters OK
08:23:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:11 Set A/D data flow result=40
08:23:11 Set A/D channel type result=40
08:23:11 Set A/D encoding result=40
08:23:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:11 Set channel filter=0.000000e+000  result=40
08:23:11 Config A/D  Result=40
08:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:11 Get A/D filter: -9.255963e+061  result=40
08:23:11 Get A/D value=-858993460  result=40
08:23:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:11 Parameters OK
08:23:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:11 Set A/D data flow result=40
08:23:11 Set A/D channel type result=40
08:23:11 Set A/D encoding result=40
08:23:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:11 Set channel filter=0.000000e+000  result=40
08:23:11 Config A/D  Result=40
08:23:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:11 Get A/D filter: -9.255963e+061  result=40
08:23:11 Get A/D value=-858993460  result=40
08:23:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:23:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:23:11 Aux=
08:23:11 Message to Camera, serial 187513 queued
08:23:48 Received message from Master: op=PointingHead serial=187526
08:23:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:23:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:23:49 Point started: ret=0
08:23:49 point_skyscan result=0
[UTC 2019-3-9  08:23:49]
08:23:49 Check angles
08:23:49 SkyScan query
08:23:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:23:50 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:23:50 Message to Master queued w/err=0: serial=187526 error=0
08:23:55 Received message from Master: op=Filter serial=187527
08:23:55 Color wheel filter change from 0 to 0
08:23:55 FLIGetFilterPos err=0  currentPosition=0
08:23:55 FLIGetStepsRemaining err=0  RemainingSteps=0
08:23:55 Filter is already there-color wheel unchanged
08:23:55 Received message from Master: op=Shutter serial=187528
08:23:55 Shutter LASER close
08:23:55 Received message from Camera: op=State serial=187530
08:23:55 GetSingleValue result=40  Value=cccccccc
08:23:55 SkyScan query
08:23:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:23:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:56 Parameters OK
08:23:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:56 Set A/D data flow result=40
08:23:56 Set A/D channel type result=40
08:23:56 Set A/D encoding result=40
08:23:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:56 Set channel filter=0.000000e+000  result=40
08:23:56 Config A/D  Result=40
08:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:56 Get A/D filter: -9.255963e+061  result=40
08:23:56 Get A/D value=-858993460  result=40
08:23:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:23:56 Parameters OK
08:23:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:23:56 Set A/D data flow result=40
08:23:56 Set A/D channel type result=40
08:23:56 Set A/D encoding result=40
08:23:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:23:56 Set channel filter=0.000000e+000  result=40
08:23:56 Config A/D  Result=40
08:23:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:23:56 Get A/D filter: -9.255963e+061  result=40
08:23:56 Get A/D value=-858993460  result=40
08:23:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:23:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:23:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:23:56 Aux=
08:23:56 Message to Camera, serial 187530 queued
08:24:32 Received message from Master: op=PointingHead serial=187543
08:24:32 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:24:32 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:24:33 Point started: ret=0
08:24:33 point_skyscan result=0
08:24:34 Check angles
08:24:34 SkyScan query
08:24:34 SkyScan query done: ret=0  az=135.885<-9059  ze=-6.51<-12434  Statuses=0009 0008
08:24:34 Msec=0  True Az=135.885  Ze=-6.51  Az status=0009  Ze status=0008
08:24:34 Check angles
08:24:34 SkyScan query
08:24:35 SkyScan query done: ret=0  az=153.345<-10223  ze=-6.495<-12433  Statuses=0009 0008
08:24:35 Msec=750  True Az=153.345  Ze=-6.495  Az status=0009  Ze status=0008
08:24:35 Check angles
08:24:35 SkyScan query
08:24:36 SkyScan query done: ret=0  az=170.82<-11388  ze=-6.495<-12433  Statuses=0009 0008
08:24:36 Msec=1500  True Az=170.82  Ze=-6.495  Az status=0009  Ze status=0008
08:24:36 Check angles
08:24:36 SkyScan query
08:24:36 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:24:36 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:24:36 Message to Master queued w/err=0: serial=187543 error=0
08:24:41 Received message from Master: op=Filter serial=187544
08:24:41 Color wheel filter change from 0 to 0
08:24:41 FLIGetFilterPos err=0  currentPosition=0
08:24:41 FLIGetStepsRemaining err=0  RemainingSteps=0
08:24:41 Filter is already there-color wheel unchanged
08:24:42 Received message from Master: op=Shutter serial=187545
08:24:42 Shutter LASER close
08:24:42 Received message from Camera: op=State serial=187547
08:24:42 GetSingleValue result=40  Value=cccccccc
08:24:42 SkyScan query
08:24:42 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:24:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:24:42 Parameters OK
08:24:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:24:42 Set A/D data flow result=40
08:24:42 Set A/D channel type result=40
08:24:42 Set A/D encoding result=40
08:24:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:24:42 Set channel filter=0.000000e+000  result=40
08:24:42 Config A/D  Result=40
08:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:24:42 Get A/D filter: -9.255963e+061  result=40
08:24:42 Get A/D value=-858993460  result=40
08:24:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:24:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:24:42 Parameters OK
08:24:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:24:42 Set A/D data flow result=40
08:24:42 Set A/D channel type result=40
08:24:42 Set A/D encoding result=40
08:24:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:24:42 Set channel filter=0.000000e+000  result=40
08:24:42 Config A/D  Result=40
08:24:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:24:42 Get A/D filter: -9.255963e+061  result=40
08:24:42 Get A/D value=-858993460  result=40
08:24:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:24:42 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:24:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:24:42 Aux=
08:24:42 Message to Camera, serial 187547 queued
08:25:19 Received message from Master: op=PointingHead serial=187560
08:25:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:25:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:25:19 Point started: ret=0
08:25:19 point_skyscan result=0
08:25:20 Check angles
08:25:20 SkyScan query
08:25:21 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
08:25:21 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
08:25:21 Check angles
08:25:21 SkyScan query
08:25:21 SkyScan query done: ret=0  az=135.24<-9016  ze=6.495<-11567  Statuses=0009 0008
08:25:21 Msec=750  True Az=135.24  Ze=6.495  Az status=0009  Ze status=0008
08:25:22 Check angles
08:25:22 SkyScan query
08:25:22 SkyScan query done: ret=0  az=117.27<-7818  ze=6.495<-11567  Statuses=0009 0008
08:25:22 Msec=1500  True Az=117.27  Ze=6.495  Az status=0009  Ze status=0008
08:25:22 Check angles
08:25:22 SkyScan query
08:25:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:25:23 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:25:23 Message to Master queued w/err=0: serial=187560 error=0
08:25:28 Received message from Master: op=Filter serial=187561
08:25:28 Color wheel filter change from 0 to 0
08:25:28 FLIGetFilterPos err=0  currentPosition=0
08:25:28 FLIGetStepsRemaining err=0  RemainingSteps=0
08:25:28 Filter is already there-color wheel unchanged
08:25:28 Received message from Master: op=Shutter serial=187562
08:25:28 Shutter LASER close
08:25:28 Received message from Camera: op=State serial=187564
08:25:28 GetSingleValue result=40  Value=cccccccc
08:25:28 SkyScan query
08:25:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:25:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:25:29 Parameters OK
08:25:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:25:29 Set A/D data flow result=40
08:25:29 Set A/D channel type result=40
08:25:29 Set A/D encoding result=40
08:25:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:25:29 Set channel filter=0.000000e+000  result=40
08:25:29 Config A/D  Result=40
08:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:25:29 Get A/D filter: -9.255963e+061  result=40
08:25:29 Get A/D value=-858993460  result=40
08:25:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:25:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:25:29 Parameters OK
08:25:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:25:29 Set A/D data flow result=40
08:25:29 Set A/D channel type result=40
08:25:29 Set A/D encoding result=40
08:25:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:25:29 Set channel filter=0.000000e+000  result=40
08:25:29 Config A/D  Result=40
08:25:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:25:29 Get A/D filter: -9.255963e+061  result=40
08:25:29 Get A/D value=-858993460  result=40
08:25:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:25:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:25:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:25:29 Aux=
08:25:29 Message to Camera, serial 187564 queued
08:26:06 Received message from Master: op=PointingHead serial=187577
08:26:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:26:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:26:06 Point started: ret=0
08:26:06 point_skyscan result=0
08:26:07 Check angles
08:26:07 SkyScan query
08:26:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
08:26:07 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
08:26:07 Check angles
08:26:07 SkyScan query
08:26:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.835<-14989  Statuses=0008 0009
08:26:08 Msec=750  True Az=112.995  Ze=-44.835  Az status=0008  Ze status=0009
08:26:08 Check angles
08:26:08 SkyScan query
08:26:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.775<-16385  Statuses=0008 0009
08:26:09 Msec=1500  True Az=112.995  Ze=-65.775  Az status=0008  Ze status=0009
08:26:09 Check angles
08:26:09 SkyScan query
08:26:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
08:26:10 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
08:26:10 Check angles
08:26:10 SkyScan query
08:26:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.105<-19207  Statuses=0008 0009
08:26:10 Msec=3000  True Az=112.995  Ze=-108.105  Az status=0008  Ze status=0009
08:26:10 Check angles
08:26:10 SkyScan query
08:26:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.045<-20603  Statuses=0008 0009
08:26:11 Msec=3750  True Az=112.995  Ze=-129.045  Az status=0008  Ze status=0009
08:26:11 Check angles
08:26:11 SkyScan query
08:26:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.015<-22001  Statuses=0008 0009
08:26:12 Msec=4500  True Az=112.995  Ze=-150.015  Az status=0008  Ze status=0009
08:26:12 Check angles
08:26:12 SkyScan query
08:26:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.21<-23414  Statuses=0008 0009
08:26:13 Msec=5250  True Az=112.995  Ze=-171.21  Az status=0008  Ze status=0009
08:26:13 Check angles
08:26:13 SkyScan query
08:26:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:26:13 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:26:13 Message to Master queued w/err=0: serial=187577 error=0
08:26:18 Received message from Master: op=Filter serial=187578
08:26:18 Color wheel filter change from 0 to 0
08:26:18 FLIGetFilterPos err=0  currentPosition=0
08:26:18 FLIGetStepsRemaining err=0  RemainingSteps=0
08:26:18 Filter is already there-color wheel unchanged
08:26:18 Received message from Master: op=Shutter serial=187579
08:26:18 Shutter LASER open
08:26:19 Received message from Camera: op=State serial=187581
08:26:19 GetSingleValue result=40  Value=cccccccc
08:26:19 SkyScan query
08:26:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:26:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:26:19 Parameters OK
08:26:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:26:19 Set A/D data flow result=40
08:26:19 Set A/D channel type result=40
08:26:19 Set A/D encoding result=40
08:26:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:26:19 Set channel filter=0.000000e+000  result=40
08:26:19 Config A/D  Result=40
08:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:26:19 Get A/D filter: -9.255963e+061  result=40
08:26:19 Get A/D value=-858993460  result=40
08:26:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:26:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:26:19 Parameters OK
08:26:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:26:19 Set A/D data flow result=40
08:26:19 Set A/D channel type result=40
08:26:19 Set A/D encoding result=40
08:26:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:26:19 Set channel filter=0.000000e+000  result=40
08:26:19 Config A/D  Result=40
08:26:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:26:19 Get A/D filter: -9.255963e+061  result=40
08:26:19 Get A/D value=-858993460  result=40
08:26:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:26:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:26:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:26:19 Aux=
08:26:19 Message to Camera, serial 187581 queued
08:26:28 Received message from Master: op=Shutter serial=187591
08:26:28 Shutter LASER close
08:26:28 Received message from Master: op=PointingHead serial=187595
08:26:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:26:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:26:28 Point started: ret=0
08:26:28 point_skyscan result=0
08:26:29 Check angles
08:26:29 SkyScan query
08:26:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
08:26:30 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
08:26:30 Check angles
08:26:30 SkyScan query
08:26:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.19<-20146  Statuses=0008 0009
08:26:31 Msec=750  True Az=112.995  Ze=-122.19  Az status=0008  Ze status=0009
08:26:31 Check angles
08:26:31 SkyScan query
08:26:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.235<-18749  Statuses=0008 0009
08:26:31 Msec=1500  True Az=112.995  Ze=-101.235  Az status=0008  Ze status=0009
08:26:31 Check angles
08:26:31 SkyScan query
08:26:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.28<-17352  Statuses=0008 0009
08:26:32 Msec=2250  True Az=112.995  Ze=-80.28  Az status=0008  Ze status=0009
08:26:32 Check angles
08:26:32 SkyScan query
08:26:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.89<-15926  Statuses=0008 0009
08:26:33 Msec=3000  True Az=112.995  Ze=-58.89  Az status=0008  Ze status=0009
08:26:33 Check angles
08:26:33 SkyScan query
08:26:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.905<-14527  Statuses=0008 0009
08:26:34 Msec=3750  True Az=112.995  Ze=-37.905  Az status=0008  Ze status=0009
08:26:34 Check angles
08:26:34 SkyScan query
08:26:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.965<-13131  Statuses=0008 0009
08:26:34 Msec=4500  True Az=112.995  Ze=-16.965  Az status=0008  Ze status=0009
08:26:34 Check angles
08:26:34 SkyScan query
08:26:35 SkyScan query done: ret=0  az=112.995<-7533  ze=3.99<-11734  Statuses=0008 0009
08:26:35 Msec=5250  True Az=112.995  Ze=3.99  Az status=0008  Ze status=0009
08:26:35 Check angles
08:26:35 SkyScan query
08:26:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:26:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:26:36 Message to Master queued w/err=0: serial=187595 error=0
08:26:41 Received message from Master: op=Filter serial=187596
08:26:41 Color wheel filter change from 0 to 0
08:26:41 FLIGetFilterPos err=0  currentPosition=0
08:26:41 FLIGetStepsRemaining err=0  RemainingSteps=0
08:26:41 Filter is already there-color wheel unchanged
08:26:41 Received message from Master: op=Shutter serial=187597
08:26:41 Shutter LASER close
08:26:41 Received message from Camera: op=State serial=187599
08:26:41 GetSingleValue result=40  Value=cccccccc
08:26:41 SkyScan query
08:26:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:26:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:26:42 Parameters OK
08:26:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:26:42 Set A/D data flow result=40
08:26:42 Set A/D channel type result=40
08:26:42 Set A/D encoding result=40
08:26:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:26:42 Set channel filter=0.000000e+000  result=40
08:26:42 Config A/D  Result=40
08:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:26:42 Get A/D filter: -9.255963e+061  result=40
08:26:42 Get A/D value=-858993460  result=40
08:26:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:26:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:26:42 Parameters OK
08:26:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:26:42 Set A/D data flow result=40
08:26:42 Set A/D channel type result=40
08:26:42 Set A/D encoding result=40
08:26:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:26:42 Set channel filter=0.000000e+000  result=40
08:26:42 Config A/D  Result=40
08:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:26:42 Get A/D filter: -9.255963e+061  result=40
08:26:42 Get A/D value=-858993460  result=40
08:26:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:26:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:26:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:26:42 Aux=
08:26:42 Message to Camera, serial 187599 queued
08:27:19 Received message from Master: op=PointingHead serial=187612
08:27:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:27:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:27:19 Point started: ret=0
08:27:19 point_skyscan result=0
08:27:20 Check angles
08:27:20 SkyScan query
08:27:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:27:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:27:20 Message to Master queued w/err=0: serial=187612 error=0
08:27:25 Received message from Master: op=Filter serial=187613
08:27:25 Color wheel filter change from 0 to 0
08:27:25 FLIGetFilterPos err=0  currentPosition=0
08:27:25 FLIGetStepsRemaining err=0  RemainingSteps=0
08:27:25 Filter is already there-color wheel unchanged
08:27:25 Received message from Master: op=Shutter serial=187614
08:27:25 Shutter LASER close
08:27:26 Received message from Camera: op=State serial=187616
08:27:26 GetSingleValue result=40  Value=cccccccc
08:27:26 SkyScan query
08:27:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:27:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:27:26 Parameters OK
08:27:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:27:26 Set A/D data flow result=40
08:27:26 Set A/D channel type result=40
08:27:26 Set A/D encoding result=40
08:27:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:27:26 Set channel filter=0.000000e+000  result=40
08:27:26 Config A/D  Result=40
08:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:27:26 Get A/D filter: -9.255963e+061  result=40
08:27:26 Get A/D value=-858993460  result=40
08:27:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:27:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:27:26 Parameters OK
08:27:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:27:26 Set A/D data flow result=40
08:27:26 Set A/D channel type result=40
08:27:26 Set A/D encoding result=40
08:27:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:27:26 Set channel filter=0.000000e+000  result=40
08:27:26 Config A/D  Result=40
08:27:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:27:26 Get A/D filter: -9.255963e+061  result=40
08:27:26 Get A/D value=-858993460  result=40
08:27:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:27:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:27:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:27:26 Aux=
08:27:26 Message to Camera, serial 187616 queued
08:28:03 Received message from Master: op=PointingHead serial=187629
08:28:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:28:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:28:03 Point started: ret=0
08:28:03 point_skyscan result=0
08:28:04 Check angles
08:28:04 SkyScan query
08:28:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:28:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:28:05 Message to Master queued w/err=0: serial=187629 error=0
08:28:10 Received message from Master: op=Filter serial=187630
08:28:10 Color wheel filter change from 0 to 0
08:28:10 FLIGetFilterPos err=0  currentPosition=0
08:28:10 FLIGetStepsRemaining err=0  RemainingSteps=0
08:28:10 Filter is already there-color wheel unchanged
08:28:10 Received message from Master: op=Shutter serial=187631
08:28:10 Shutter LASER close
08:28:10 Received message from Camera: op=State serial=187633
08:28:10 GetSingleValue result=40  Value=cccccccc
08:28:10 SkyScan query
08:28:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:28:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:28:10 Parameters OK
08:28:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:28:10 Set A/D data flow result=40
08:28:10 Set A/D channel type result=40
08:28:10 Set A/D encoding result=40
08:28:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:28:10 Set channel filter=0.000000e+000  result=40
08:28:10 Config A/D  Result=40
08:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:28:10 Get A/D filter: -9.255963e+061  result=40
08:28:10 Get A/D value=-858993460  result=40
08:28:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:28:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:28:10 Parameters OK
08:28:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:28:10 Set A/D data flow result=40
08:28:10 Set A/D channel type result=40
08:28:10 Set A/D encoding result=40
08:28:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:28:10 Set channel filter=0.000000e+000  result=40
08:28:10 Config A/D  Result=40
08:28:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:28:10 Get A/D filter: -9.255963e+061  result=40
08:28:10 Get A/D value=-858993460  result=40
08:28:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:28:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:28:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:28:10 Aux=
08:28:10 Message to Camera, serial 187633 queued
08:28:47 Received message from Master: op=PointingHead serial=187646
08:28:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:28:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:28:48 Point started: ret=0
08:28:48 point_skyscan result=0
08:28:48 Check angles
08:28:48 SkyScan query
08:28:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:28:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:28:49 Message to Master queued w/err=0: serial=187646 error=0
08:28:54 Received message from Master: op=Filter serial=187647
08:28:54 Color wheel filter change from 0 to 0
08:28:54 FLIGetFilterPos err=0  currentPosition=0
08:28:54 FLIGetStepsRemaining err=0  RemainingSteps=0
08:28:54 Filter is already there-color wheel unchanged
08:28:54 Received message from Master: op=Shutter serial=187648
08:28:54 Shutter LASER close
08:28:54 Received message from Camera: op=State serial=187650
08:28:54 GetSingleValue result=40  Value=cccccccc
08:28:54 SkyScan query
08:28:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:28:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:28:55 Parameters OK
08:28:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:28:55 Set A/D data flow result=40
08:28:55 Set A/D channel type result=40
08:28:55 Set A/D encoding result=40
08:28:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:28:55 Set channel filter=0.000000e+000  result=40
08:28:55 Config A/D  Result=40
08:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:28:55 Get A/D filter: -9.255963e+061  result=40
08:28:55 Get A/D value=-858993460  result=40
08:28:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:28:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:28:55 Parameters OK
08:28:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:28:55 Set A/D data flow result=40
08:28:55 Set A/D channel type result=40
08:28:55 Set A/D encoding result=40
08:28:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:28:55 Set channel filter=0.000000e+000  result=40
08:28:55 Config A/D  Result=40
08:28:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:28:55 Get A/D filter: -9.255963e+061  result=40
08:28:55 Get A/D value=-858993460  result=40
08:28:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:28:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:28:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:28:55 Aux=
08:28:55 Message to Camera, serial 187650 queued
08:29:32 Received message from Master: op=PointingHead serial=187663
08:29:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:29:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:29:32 Point started: ret=0
08:29:32 point_skyscan result=0
08:29:33 Check angles
08:29:33 SkyScan query
08:29:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.61<-13574  Statuses=0008 0009
08:29:33 Msec=0  True Az=112.995  Ze=-23.61  Az status=0008  Ze status=0009
08:29:33 Check angles
08:29:33 SkyScan query
08:29:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.565<-14971  Statuses=0008 0009
08:29:34 Msec=750  True Az=112.995  Ze=-44.565  Az status=0008  Ze status=0009
08:29:34 Check angles
08:29:34 SkyScan query
08:29:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.52<-16368  Statuses=0008 0009
08:29:35 Msec=1500  True Az=112.995  Ze=-65.52  Az status=0008  Ze status=0009
08:29:35 Check angles
08:29:35 SkyScan query
08:29:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.475<-17765  Statuses=0008 0009
08:29:35 Msec=2250  True Az=112.995  Ze=-86.475  Az status=0008  Ze status=0009
08:29:36 Check angles
08:29:36 SkyScan query
08:29:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.85<-19190  Statuses=0008 0009
08:29:36 Msec=3000  True Az=112.995  Ze=-107.85  Az status=0008  Ze status=0009
08:29:36 Check angles
08:29:36 SkyScan query
08:29:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.225<-20615  Statuses=0008 0009
08:29:37 Msec=3750  True Az=112.995  Ze=-129.225  Az status=0008  Ze status=0009
08:29:37 Check angles
08:29:37 SkyScan query
08:29:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.615<-22041  Statuses=0008 0009
08:29:38 Msec=4500  True Az=112.995  Ze=-150.615  Az status=0008  Ze status=0009
08:29:38 Check angles
08:29:38 SkyScan query
08:29:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.33<-23422  Statuses=0008 0009
08:29:39 Msec=5250  True Az=112.995  Ze=-171.33  Az status=0008  Ze status=0009
08:29:39 Check angles
08:29:39 SkyScan query
08:29:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:29:39 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:29:39 Message to Master queued w/err=0: serial=187663 error=0
08:29:44 Received message from Master: op=Filter serial=187664
08:29:44 Color wheel filter change from 0 to 0
08:29:44 FLIGetFilterPos err=0  currentPosition=0
08:29:44 FLIGetStepsRemaining err=0  RemainingSteps=0
08:29:44 Filter is already there-color wheel unchanged
08:29:44 Received message from Master: op=Shutter serial=187665
08:29:44 Shutter LASER open
08:29:45 Received message from Camera: op=State serial=187667
08:29:45 GetSingleValue result=40  Value=cccccccc
08:29:45 SkyScan query
08:29:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:29:45 Parameters OK
08:29:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:29:45 Set A/D data flow result=40
08:29:45 Set A/D channel type result=40
08:29:45 Set A/D encoding result=40
08:29:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:29:45 Set channel filter=0.000000e+000  result=40
08:29:45 Config A/D  Result=40
08:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:29:45 Get A/D filter: -9.255963e+061  result=40
08:29:45 Get A/D value=-858993460  result=40
08:29:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:29:45 Parameters OK
08:29:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:29:45 Set A/D data flow result=40
08:29:45 Set A/D channel type result=40
08:29:45 Set A/D encoding result=40
08:29:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:29:45 Set channel filter=0.000000e+000  result=40
08:29:45 Config A/D  Result=40
08:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:29:45 Get A/D filter: -9.255963e+061  result=40
08:29:45 Get A/D value=-858993460  result=40
08:29:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:29:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:29:45 Aux=
08:29:45 Message to Camera, serial 187667 queued
08:29:54 Received message from Master: op=Shutter serial=187677
08:29:54 Shutter LASER close
08:29:54 Received message from Master: op=PointingHead serial=187681
08:29:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:29:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:29:55 Point started: ret=0
08:29:55 point_skyscan result=0
08:29:55 Check angles
08:29:55 SkyScan query
08:29:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
08:29:56 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
08:29:56 Check angles
08:29:56 SkyScan query
08:29:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
08:29:57 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
08:29:57 Check angles
08:29:57 SkyScan query
08:29:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
08:29:57 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
08:29:58 Check angles
08:29:58 SkyScan query
08:29:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.335<-17289  Statuses=0008 0009
08:29:58 Msec=2250  True Az=112.995  Ze=-79.335  Az status=0008  Ze status=0009
08:29:58 Check angles
08:29:58 SkyScan query
08:29:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.395<-15893  Statuses=0008 0009
08:29:59 Msec=3000  True Az=112.995  Ze=-58.395  Az status=0008  Ze status=0009
08:29:59 Check angles
08:29:59 SkyScan query
08:30:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.455<-14497  Statuses=0008 0009
08:30:00 Msec=3750  True Az=112.995  Ze=-37.455  Az status=0008  Ze status=0009
08:30:00 Check angles
08:30:00 SkyScan query
08:30:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.47<-13098  Statuses=0008 0009
08:30:00 Msec=4500  True Az=112.995  Ze=-16.47  Az status=0008  Ze status=0009
08:30:01 Check angles
08:30:01 SkyScan query
08:30:01 SkyScan query done: ret=0  az=112.995<-7533  ze=4.38<-11708  Statuses=0008 0009
08:30:01 Msec=5250  True Az=112.995  Ze=4.38  Az status=0008  Ze status=0009
08:30:01 Check angles
08:30:01 SkyScan query
08:30:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:30:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:30:02 Message to Master queued w/err=0: serial=187681 error=0
08:30:07 Received message from Master: op=Filter serial=187682
08:30:07 Color wheel filter change from 0 to 0
08:30:07 FLIGetFilterPos err=0  currentPosition=0
08:30:07 FLIGetStepsRemaining err=0  RemainingSteps=0
08:30:07 Filter is already there-color wheel unchanged
08:30:07 Received message from Master: op=Shutter serial=187683
08:30:07 Shutter LASER close
08:30:07 Received message from Camera: op=State serial=187685
08:30:07 GetSingleValue result=40  Value=cccccccc
08:30:07 SkyScan query
08:30:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:30:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:08 Parameters OK
08:30:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:08 Set A/D data flow result=40
08:30:08 Set A/D channel type result=40
08:30:08 Set A/D encoding result=40
08:30:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:08 Set channel filter=0.000000e+000  result=40
08:30:08 Config A/D  Result=40
08:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:08 Get A/D filter: -9.255963e+061  result=40
08:30:08 Get A/D value=-858993460  result=40
08:30:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:08 Parameters OK
08:30:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:08 Set A/D data flow result=40
08:30:08 Set A/D channel type result=40
08:30:08 Set A/D encoding result=40
08:30:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:08 Set channel filter=0.000000e+000  result=40
08:30:08 Config A/D  Result=40
08:30:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:08 Get A/D filter: -9.255963e+061  result=40
08:30:08 Get A/D value=-858993460  result=40
08:30:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:30:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:30:08 Aux=
08:30:08 Message to Camera, serial 187685 queued
08:30:45 Received message from Master: op=PointingHead serial=187698
08:30:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:30:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:30:45 Point started: ret=0
08:30:45 point_skyscan result=0
08:30:46 Check angles
08:30:46 SkyScan query
08:30:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:30:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:30:46 Message to Master queued w/err=0: serial=187698 error=0
08:30:51 Received message from Master: op=Filter serial=187699
08:30:51 Color wheel filter change from 0 to 0
08:30:51 FLIGetFilterPos err=0  currentPosition=0
08:30:51 FLIGetStepsRemaining err=0  RemainingSteps=0
08:30:51 Filter is already there-color wheel unchanged
08:30:52 Received message from Master: op=Shutter serial=187700
08:30:52 Shutter LASER close
08:30:52 Received message from Camera: op=State serial=187702
08:30:52 GetSingleValue result=40  Value=cccccccc
08:30:52 SkyScan query
08:30:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:30:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:52 Parameters OK
08:30:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:52 Set A/D data flow result=40
08:30:52 Set A/D channel type result=40
08:30:52 Set A/D encoding result=40
08:30:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:52 Set channel filter=0.000000e+000  result=40
08:30:52 Config A/D  Result=40
08:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:52 Get A/D filter: -9.255963e+061  result=40
08:30:52 Get A/D value=-858993460  result=40
08:30:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:30:52 Parameters OK
08:30:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:30:52 Set A/D data flow result=40
08:30:52 Set A/D channel type result=40
08:30:52 Set A/D encoding result=40
08:30:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:30:52 Set channel filter=0.000000e+000  result=40
08:30:52 Config A/D  Result=40
08:30:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:30:52 Get A/D filter: -9.255963e+061  result=40
08:30:52 Get A/D value=-858993460  result=40
08:30:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:30:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:30:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:30:52 Aux=
08:30:52 Message to Camera, serial 187702 queued
08:31:29 Received message from Master: op=PointingHead serial=187715
08:31:29 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:31:29 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:31:29 Point started: ret=0
08:31:29 point_skyscan result=0
08:31:30 Check angles
08:31:30 SkyScan query
08:31:31 SkyScan query done: ret=0  az=136.305<-9087  ze=-6.51<-12434  Statuses=0009 0008
08:31:31 Msec=0  True Az=136.305  Ze=-6.51  Az status=0009  Ze status=0008
08:31:31 Check angles
08:31:31 SkyScan query
08:31:31 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
08:31:31 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
08:31:32 Check angles
08:31:32 SkyScan query
08:31:32 SkyScan query done: ret=0  az=171.405<-11427  ze=-6.495<-12433  Statuses=0009 0008
08:31:32 Msec=1500  True Az=171.405  Ze=-6.495  Az status=0009  Ze status=0008
08:31:32 Check angles
08:31:32 SkyScan query
08:31:33 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:31:33 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:31:33 Message to Master queued w/err=0: serial=187715 error=0
08:31:38 Received message from Master: op=Filter serial=187716
08:31:38 Color wheel filter change from 0 to 0
08:31:38 FLIGetFilterPos err=0  currentPosition=0
08:31:38 FLIGetStepsRemaining err=0  RemainingSteps=0
08:31:38 Filter is already there-color wheel unchanged
08:31:38 Received message from Master: op=Shutter serial=187717
08:31:38 Shutter LASER close
08:31:38 Received message from Camera: op=State serial=187719
08:31:38 GetSingleValue result=40  Value=cccccccc
08:31:38 SkyScan query
08:31:39 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:31:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:31:39 Parameters OK
08:31:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:31:39 Set A/D data flow result=40
08:31:39 Set A/D channel type result=40
08:31:39 Set A/D encoding result=40
08:31:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:31:39 Set channel filter=0.000000e+000  result=40
08:31:39 Config A/D  Result=40
08:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:31:39 Get A/D filter: -9.255963e+061  result=40
08:31:39 Get A/D value=-858993460  result=40
08:31:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:31:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:31:39 Parameters OK
08:31:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:31:39 Set A/D data flow result=40
08:31:39 Set A/D channel type result=40
08:31:39 Set A/D encoding result=40
08:31:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:31:39 Set channel filter=0.000000e+000  result=40
08:31:39 Config A/D  Result=40
08:31:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:31:39 Get A/D filter: -9.255963e+061  result=40
08:31:39 Get A/D value=-858993460  result=40
08:31:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:31:39 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:31:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:31:39 Aux=
08:31:39 Message to Camera, serial 187719 queued
08:32:16 Received message from Master: op=PointingHead serial=187732
08:32:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:32:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:32:16 Point started: ret=0
08:32:16 point_skyscan result=0
08:32:17 Check angles
08:32:17 SkyScan query
08:32:17 SkyScan query done: ret=0  az=153.135<-10209  ze=6.51<-11566  Statuses=0009 0008
08:32:17 Msec=0  True Az=153.135  Ze=6.51  Az status=0009  Ze status=0008
08:32:17 Check angles
08:32:17 SkyScan query
08:32:18 SkyScan query done: ret=0  az=135.69<-9046  ze=6.495<-11567  Statuses=0009 0008
08:32:18 Msec=750  True Az=135.69  Ze=6.495  Az status=0009  Ze status=0008
08:32:18 Check angles
08:32:18 SkyScan query
08:32:19 SkyScan query done: ret=0  az=117.75<-7850  ze=6.495<-11567  Statuses=0009 0008
08:32:19 Msec=1500  True Az=117.75  Ze=6.495  Az status=0009  Ze status=0008
08:32:19 Check angles
08:32:19 SkyScan query
08:32:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:32:20 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:32:20 Message to Master queued w/err=0: serial=187732 error=0
08:32:25 Received message from Master: op=Filter serial=187733
08:32:25 Color wheel filter change from 0 to 0
08:32:25 FLIGetFilterPos err=0  currentPosition=0
08:32:25 FLIGetStepsRemaining err=0  RemainingSteps=0
08:32:25 Filter is already there-color wheel unchanged
08:32:25 Received message from Master: op=Shutter serial=187734
08:32:25 Shutter LASER close
08:32:25 Received message from Camera: op=State serial=187736
08:32:25 GetSingleValue result=40  Value=cccccccc
08:32:25 SkyScan query
08:32:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:32:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:32:25 Parameters OK
08:32:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:32:25 Set A/D data flow result=40
08:32:25 Set A/D channel type result=40
08:32:25 Set A/D encoding result=40
08:32:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:32:25 Set channel filter=0.000000e+000  result=40
08:32:25 Config A/D  Result=40
08:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:32:25 Get A/D filter: -9.255963e+061  result=40
08:32:25 Get A/D value=-858993460  result=40
08:32:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:32:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:32:25 Parameters OK
08:32:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:32:25 Set A/D data flow result=40
08:32:25 Set A/D channel type result=40
08:32:25 Set A/D encoding result=40
08:32:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:32:25 Set channel filter=0.000000e+000  result=40
08:32:25 Config A/D  Result=40
08:32:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:32:25 Get A/D filter: -9.255963e+061  result=40
08:32:25 Get A/D value=-858993460  result=40
08:32:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:32:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:32:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:32:25 Aux=
08:32:25 Message to Camera, serial 187736 queued
08:33:02 Received message from Master: op=PointingHead serial=187749
08:33:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:33:02 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:33:02 Point started: ret=0
08:33:02 point_skyscan result=0
08:33:03 Check angles
08:33:03 SkyScan query
08:33:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
08:33:04 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
08:33:04 Check angles
08:33:04 SkyScan query
08:33:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
08:33:05 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
08:33:05 Check angles
08:33:05 SkyScan query
08:33:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.28<-16352  Statuses=0008 0009
08:33:05 Msec=1500  True Az=112.995  Ze=-65.28  Az status=0008  Ze status=0009
08:33:05 Check angles
08:33:05 SkyScan query
08:33:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
08:33:06 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
08:33:06 Check angles
08:33:06 SkyScan query
08:33:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.19<-19146  Statuses=0008 0009
08:33:07 Msec=3000  True Az=112.995  Ze=-107.19  Az status=0008  Ze status=0009
08:33:07 Check angles
08:33:07 SkyScan query
08:33:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.145<-20543  Statuses=0008 0009
08:33:08 Msec=3750  True Az=112.995  Ze=-128.145  Az status=0008  Ze status=0009
08:33:08 Check angles
08:33:08 SkyScan query
08:33:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.115<-21941  Statuses=0008 0009
08:33:08 Msec=4500  True Az=112.995  Ze=-149.115  Az status=0008  Ze status=0009
08:33:08 Check angles
08:33:08 SkyScan query
08:33:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.055<-23337  Statuses=0008 0009
08:33:09 Msec=5250  True Az=112.995  Ze=-170.055  Az status=0008  Ze status=0009
08:33:09 Check angles
08:33:09 SkyScan query
08:33:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:33:10 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:33:10 Message to Master queued w/err=0: serial=187749 error=0
08:33:15 Received message from Master: op=Filter serial=187750
08:33:15 Color wheel filter change from 0 to 0
08:33:15 FLIGetFilterPos err=0  currentPosition=0
08:33:15 FLIGetStepsRemaining err=0  RemainingSteps=0
08:33:15 Filter is already there-color wheel unchanged
08:33:15 Received message from Master: op=Shutter serial=187751
08:33:15 Shutter LASER open
08:33:15 Received message from Camera: op=State serial=187753
08:33:15 GetSingleValue result=40  Value=cccccccc
08:33:15 SkyScan query
08:33:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:33:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:33:16 Parameters OK
08:33:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:33:16 Set A/D data flow result=40
08:33:16 Set A/D channel type result=40
08:33:16 Set A/D encoding result=40
08:33:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:33:16 Set channel filter=0.000000e+000  result=40
08:33:16 Config A/D  Result=40
08:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:33:16 Get A/D filter: -9.255963e+061  result=40
08:33:16 Get A/D value=-858993460  result=40
08:33:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:33:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:33:16 Parameters OK
08:33:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:33:16 Set A/D data flow result=40
08:33:16 Set A/D channel type result=40
08:33:16 Set A/D encoding result=40
08:33:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:33:16 Set channel filter=0.000000e+000  result=40
08:33:16 Config A/D  Result=40
08:33:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:33:16 Get A/D filter: -9.255963e+061  result=40
08:33:16 Get A/D value=-858993460  result=40
08:33:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:33:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:33:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:33:16 Aux=
08:33:16 Message to Camera, serial 187753 queued
08:33:24 Received message from Master: op=Shutter serial=187763
08:33:24 Shutter LASER close
08:33:25 Received message from Master: op=PointingHead serial=187767
08:33:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:33:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:33:25 Point started: ret=0
08:33:25 point_skyscan result=0
08:33:26 Check angles
08:33:26 SkyScan query
08:33:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
08:33:26 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
08:33:26 Check angles
08:33:26 SkyScan query
08:33:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.115<-20141  Statuses=0008 0009
08:33:27 Msec=750  True Az=112.995  Ze=-122.115  Az status=0008  Ze status=0009
08:33:27 Check angles
08:33:27 SkyScan query
08:33:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
08:33:28 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
08:33:28 Check angles
08:33:28 SkyScan query
08:33:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.785<-17319  Statuses=0008 0009
08:33:29 Msec=2250  True Az=112.995  Ze=-79.785  Az status=0008  Ze status=0009
08:33:29 Check angles
08:33:29 SkyScan query
08:33:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.83<-15922  Statuses=0008 0009
08:33:29 Msec=3000  True Az=112.995  Ze=-58.83  Az status=0008  Ze status=0009
08:33:29 Check angles
08:33:29 SkyScan query
08:33:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.86<-14524  Statuses=0008 0009
08:33:30 Msec=3750  True Az=112.995  Ze=-37.86  Az status=0008  Ze status=0009
08:33:30 Check angles
08:33:30 SkyScan query
08:33:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.905<-13127  Statuses=0008 0009
08:33:31 Msec=4500  True Az=112.995  Ze=-16.905  Az status=0008  Ze status=0009
08:33:31 Check angles
08:33:31 SkyScan query
08:33:32 SkyScan query done: ret=0  az=112.995<-7533  ze=4.05<-11730  Statuses=0008 0009
08:33:32 Msec=5250  True Az=112.995  Ze=4.05  Az status=0008  Ze status=0009
08:33:32 Check angles
08:33:32 SkyScan query
08:33:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:33:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:33:32 Message to Master queued w/err=0: serial=187767 error=0
08:33:36 Received message from Master: op=Identify serial=187768
08:33:37 Received message from Master: op=Filter serial=187771
08:33:37 Color wheel filter change from 0 to 0
08:33:37 FLIGetFilterPos err=0  currentPosition=0
08:33:37 FLIGetStepsRemaining err=0  RemainingSteps=0
08:33:37 Filter is already there-color wheel unchanged
08:33:37 Received message from Master: op=Shutter serial=187772
08:33:37 Shutter LASER close
08:33:38 Received message from Camera: op=State serial=187774
08:33:38 GetSingleValue result=40  Value=cccccccc
08:33:38 SkyScan query
08:33:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:33:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:33:38 Parameters OK
08:33:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:33:38 Set A/D data flow result=40
08:33:38 Set A/D channel type result=40
08:33:38 Set A/D encoding result=40
08:33:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:33:38 Set channel filter=0.000000e+000  result=40
08:33:38 Config A/D  Result=40
08:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:33:38 Get A/D filter: -9.255963e+061  result=40
08:33:38 Get A/D value=-858993460  result=40
08:33:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:33:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:33:38 Parameters OK
08:33:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:33:38 Set A/D data flow result=40
08:33:38 Set A/D channel type result=40
08:33:38 Set A/D encoding result=40
08:33:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:33:38 Set channel filter=0.000000e+000  result=40
08:33:38 Config A/D  Result=40
[UTC 2019-3-9  08:33:38]
08:33:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:33:38 Get A/D filter: -9.255963e+061  result=40
08:33:38 Get A/D value=-858993460  result=40
08:33:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:33:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:33:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:33:38 Aux=
08:33:38 Message to Camera, serial 187774 queued
08:34:15 Received message from Master: op=PointingHead serial=187787
08:34:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:34:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:34:15 Point started: ret=0
08:34:15 point_skyscan result=0
08:34:16 Check angles
08:34:16 SkyScan query
08:34:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:34:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:34:17 Message to Master queued w/err=0: serial=187787 error=0
08:34:22 Received message from Master: op=Filter serial=187788
08:34:22 Color wheel filter change from 0 to 0
08:34:22 FLIGetFilterPos err=0  currentPosition=0
08:34:22 FLIGetStepsRemaining err=0  RemainingSteps=0
08:34:22 Filter is already there-color wheel unchanged
08:34:22 Received message from Master: op=Shutter serial=187789
08:34:22 Shutter LASER close
08:34:22 Received message from Camera: op=State serial=187791
08:34:22 GetSingleValue result=40  Value=cccccccc
08:34:22 SkyScan query
08:34:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:34:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:34:22 Parameters OK
08:34:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:34:22 Set A/D data flow result=40
08:34:22 Set A/D channel type result=40
08:34:22 Set A/D encoding result=40
08:34:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:34:22 Set channel filter=0.000000e+000  result=40
08:34:22 Config A/D  Result=40
08:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:34:22 Get A/D filter: -9.255963e+061  result=40
08:34:22 Get A/D value=-858993460  result=40
08:34:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:34:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:34:22 Parameters OK
08:34:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:34:22 Set A/D data flow result=40
08:34:22 Set A/D channel type result=40
08:34:22 Set A/D encoding result=40
08:34:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:34:22 Set channel filter=0.000000e+000  result=40
08:34:22 Config A/D  Result=40
08:34:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:34:22 Get A/D filter: -9.255963e+061  result=40
08:34:22 Get A/D value=-858993460  result=40
08:34:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:34:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:34:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:34:22 Aux=
08:34:22 Message to Camera, serial 187791 queued
08:34:59 Received message from Master: op=PointingHead serial=187804
08:34:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:34:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:35:00 Point started: ret=0
08:35:00 point_skyscan result=0
08:35:00 Check angles
08:35:00 SkyScan query
08:35:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:35:01 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:35:01 Message to Master queued w/err=0: serial=187804 error=0
08:35:06 Received message from Master: op=Filter serial=187805
08:35:06 Color wheel filter change from 0 to 0
08:35:06 FLIGetFilterPos err=0  currentPosition=0
08:35:06 FLIGetStepsRemaining err=0  RemainingSteps=0
08:35:06 Filter is already there-color wheel unchanged
08:35:06 Received message from Master: op=Shutter serial=187806
08:35:06 Shutter LASER close
08:35:06 Received message from Camera: op=State serial=187808
08:35:06 GetSingleValue result=40  Value=cccccccc
08:35:06 SkyScan query
08:35:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:35:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:35:07 Parameters OK
08:35:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:35:07 Set A/D data flow result=40
08:35:07 Set A/D channel type result=40
08:35:07 Set A/D encoding result=40
08:35:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:35:07 Set channel filter=0.000000e+000  result=40
08:35:07 Config A/D  Result=40
08:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:35:07 Get A/D filter: -9.255963e+061  result=40
08:35:07 Get A/D value=-858993460  result=40
08:35:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:35:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:35:07 Parameters OK
08:35:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:35:07 Set A/D data flow result=40
08:35:07 Set A/D channel type result=40
08:35:07 Set A/D encoding result=40
08:35:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:35:07 Set channel filter=0.000000e+000  result=40
08:35:07 Config A/D  Result=40
08:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:35:07 Get A/D filter: -9.255963e+061  result=40
08:35:07 Get A/D value=-858993460  result=40
08:35:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:35:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:35:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:35:07 Aux=
08:35:07 Message to Camera, serial 187808 queued
08:35:43 Received message from Master: op=PointingHead serial=187820
08:35:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:35:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:35:43 Point started: ret=0
08:35:43 point_skyscan result=0
08:35:44 Check angles
08:35:44 SkyScan query
08:35:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:35:44 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:35:44 Message to Master queued w/err=0: serial=187820 error=0
08:35:49 Received message from Master: op=Filter serial=187821
08:35:49 Color wheel filter change from 0 to 0
08:35:49 FLIGetFilterPos err=0  currentPosition=0
08:35:49 FLIGetStepsRemaining err=0  RemainingSteps=0
08:35:49 Filter is already there-color wheel unchanged
08:35:50 Received message from Master: op=Shutter serial=187822
08:35:50 Shutter LASER close
08:35:50 Received message from Camera: op=State serial=187824
08:35:50 GetSingleValue result=40  Value=cccccccc
08:35:50 SkyScan query
08:35:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:35:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:35:50 Parameters OK
08:35:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:35:50 Set A/D data flow result=40
08:35:50 Set A/D channel type result=40
08:35:50 Set A/D encoding result=40
08:35:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:35:50 Set channel filter=0.000000e+000  result=40
08:35:50 Config A/D  Result=40
08:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:35:50 Get A/D filter: -9.255963e+061  result=40
08:35:50 Get A/D value=-858993460  result=40
08:35:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:35:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:35:50 Parameters OK
08:35:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:35:50 Set A/D data flow result=40
08:35:50 Set A/D channel type result=40
08:35:50 Set A/D encoding result=40
08:35:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:35:50 Set channel filter=0.000000e+000  result=40
08:35:50 Config A/D  Result=40
08:35:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:35:50 Get A/D filter: -9.255963e+061  result=40
08:35:50 Get A/D value=-858993460  result=40
08:35:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:35:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:35:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:35:50 Aux=
08:35:50 Message to Camera, serial 187824 queued
08:36:27 Received message from Master: op=PointingHead serial=187837
08:36:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:36:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:36:27 Point started: ret=0
08:36:27 point_skyscan result=0
08:36:28 Check angles
08:36:28 SkyScan query
08:36:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.64<-13576  Statuses=0008 0009
08:36:29 Msec=0  True Az=112.995  Ze=-23.64  Az status=0008  Ze status=0009
08:36:29 Check angles
08:36:29 SkyScan query
08:36:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.58<-14972  Statuses=0008 0009
08:36:30 Msec=750  True Az=112.995  Ze=-44.58  Az status=0008  Ze status=0009
08:36:30 Check angles
08:36:30 SkyScan query
08:36:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.97<-16398  Statuses=0008 0009
08:36:30 Msec=1500  True Az=112.995  Ze=-65.97  Az status=0008  Ze status=0009
08:36:30 Check angles
08:36:30 SkyScan query
08:36:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.91<-17794  Statuses=0008 0009
08:36:31 Msec=2250  True Az=112.995  Ze=-86.91  Az status=0008  Ze status=0009
08:36:31 Check angles
08:36:31 SkyScan query
08:36:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.865<-19191  Statuses=0008 0009
08:36:32 Msec=3000  True Az=112.995  Ze=-107.865  Az status=0008  Ze status=0009
08:36:32 Check angles
08:36:32 SkyScan query
08:36:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.255<-20617  Statuses=0008 0009
08:36:33 Msec=3750  True Az=112.995  Ze=-129.255  Az status=0008  Ze status=0009
08:36:33 Check angles
08:36:33 SkyScan query
08:36:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.21<-22014  Statuses=0008 0009
08:36:33 Msec=4500  True Az=112.995  Ze=-150.21  Az status=0008  Ze status=0009
08:36:33 Check angles
08:36:33 SkyScan query
08:36:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.03<-23402  Statuses=0008 0009
08:36:34 Msec=5250  True Az=112.995  Ze=-171.03  Az status=0008  Ze status=0009
08:36:34 Check angles
08:36:34 SkyScan query
08:36:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:36:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:36:35 Message to Master queued w/err=0: serial=187837 error=0
08:36:40 Received message from Master: op=Filter serial=187838
08:36:40 Color wheel filter change from 0 to 0
08:36:40 FLIGetFilterPos err=0  currentPosition=0
08:36:40 FLIGetStepsRemaining err=0  RemainingSteps=0
08:36:40 Filter is already there-color wheel unchanged
08:36:40 Received message from Master: op=Shutter serial=187839
08:36:40 Shutter LASER open
08:36:40 Received message from Camera: op=State serial=187841
08:36:40 GetSingleValue result=40  Value=cccccccc
08:36:40 SkyScan query
08:36:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:36:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:36:41 Parameters OK
08:36:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:36:41 Set A/D data flow result=40
08:36:41 Set A/D channel type result=40
08:36:41 Set A/D encoding result=40
08:36:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:36:41 Set channel filter=0.000000e+000  result=40
08:36:41 Config A/D  Result=40
08:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:36:41 Get A/D filter: -9.255963e+061  result=40
08:36:41 Get A/D value=-858993460  result=40
08:36:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:36:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:36:41 Parameters OK
08:36:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:36:41 Set A/D data flow result=40
08:36:41 Set A/D channel type result=40
08:36:41 Set A/D encoding result=40
08:36:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:36:41 Set channel filter=0.000000e+000  result=40
08:36:41 Config A/D  Result=40
08:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:36:41 Get A/D filter: -9.255963e+061  result=40
08:36:41 Get A/D value=-858993460  result=40
08:36:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:36:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:36:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:36:41 Aux=
08:36:41 Message to Camera, serial 187841 queued
08:36:49 Received message from Master: op=Shutter serial=187851
08:36:49 Shutter LASER close
08:36:50 Received message from Master: op=PointingHead serial=187855
08:36:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:36:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:36:50 Point started: ret=0
08:36:50 point_skyscan result=0
08:36:51 Check angles
08:36:51 SkyScan query
08:36:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
08:36:51 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
08:36:52 Check angles
08:36:52 SkyScan query
08:36:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.58<-20172  Statuses=0008 0009
08:36:52 Msec=750  True Az=112.995  Ze=-122.58  Az status=0008  Ze status=0009
08:36:52 Check angles
08:36:52 SkyScan query
08:36:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.61<-18774  Statuses=0008 0009
08:36:53 Msec=1500  True Az=112.995  Ze=-101.61  Az status=0008  Ze status=0009
08:36:53 Check angles
08:36:53 SkyScan query
08:36:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.625<-17375  Statuses=0008 0009
08:36:54 Msec=2250  True Az=112.995  Ze=-80.625  Az status=0008  Ze status=0009
08:36:54 Check angles
08:36:54 SkyScan query
08:36:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.685<-15979  Statuses=0008 0009
08:36:54 Msec=3000  True Az=112.995  Ze=-59.685  Az status=0008  Ze status=0009
08:36:55 Check angles
08:36:55 SkyScan query
08:36:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.73<-14582  Statuses=0008 0009
08:36:55 Msec=3750  True Az=112.995  Ze=-38.73  Az status=0008  Ze status=0009
08:36:55 Check angles
08:36:55 SkyScan query
08:36:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.775<-13185  Statuses=0008 0009
08:36:56 Msec=4500  True Az=112.995  Ze=-17.775  Az status=0008  Ze status=0009
08:36:56 Check angles
08:36:56 SkyScan query
08:36:57 SkyScan query done: ret=0  az=112.995<-7533  ze=3.165<-11789  Statuses=0008 0009
08:36:57 Msec=5250  True Az=112.995  Ze=3.165  Az status=0008  Ze status=0009
08:36:57 Check angles
08:36:57 SkyScan query
08:36:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:36:57 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:36:57 Message to Master queued w/err=0: serial=187855 error=0
08:37:02 Received message from Master: op=Filter serial=187856
08:37:02 Color wheel filter change from 0 to 0
08:37:02 FLIGetFilterPos err=0  currentPosition=0
08:37:02 FLIGetStepsRemaining err=0  RemainingSteps=0
08:37:02 Filter is already there-color wheel unchanged
08:37:03 Received message from Master: op=Shutter serial=187857
08:37:03 Shutter LASER close
08:37:03 Received message from Camera: op=State serial=187859
08:37:03 GetSingleValue result=40  Value=cccccccc
08:37:03 SkyScan query
08:37:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:37:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:03 Parameters OK
08:37:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:03 Set A/D data flow result=40
08:37:03 Set A/D channel type result=40
08:37:03 Set A/D encoding result=40
08:37:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:03 Set channel filter=0.000000e+000  result=40
08:37:03 Config A/D  Result=40
08:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:03 Get A/D filter: -9.255963e+061  result=40
08:37:03 Get A/D value=-858993460  result=40
08:37:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:03 Parameters OK
08:37:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:03 Set A/D data flow result=40
08:37:03 Set A/D channel type result=40
08:37:03 Set A/D encoding result=40
08:37:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:03 Set channel filter=0.000000e+000  result=40
08:37:03 Config A/D  Result=40
08:37:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:03 Get A/D filter: -9.255963e+061  result=40
08:37:03 Get A/D value=-858993460  result=40
08:37:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:37:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:37:03 Aux=
08:37:03 Message to Camera, serial 187859 queued
08:37:40 Received message from Master: op=PointingHead serial=187872
08:37:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:37:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:37:41 Point started: ret=0
08:37:41 point_skyscan result=0
08:37:41 Check angles
08:37:41 SkyScan query
08:37:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:37:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:37:42 Message to Master queued w/err=0: serial=187872 error=0
08:37:47 Received message from Master: op=Filter serial=187873
08:37:47 Color wheel filter change from 0 to 0
08:37:47 FLIGetFilterPos err=0  currentPosition=0
08:37:47 FLIGetStepsRemaining err=0  RemainingSteps=0
08:37:47 Filter is already there-color wheel unchanged
08:37:47 Received message from Master: op=Shutter serial=187874
08:37:47 Shutter LASER close
08:37:47 Received message from Camera: op=State serial=187876
08:37:47 GetSingleValue result=40  Value=cccccccc
08:37:47 SkyScan query
08:37:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:37:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:48 Parameters OK
08:37:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:48 Set A/D data flow result=40
08:37:48 Set A/D channel type result=40
08:37:48 Set A/D encoding result=40
08:37:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:48 Set channel filter=0.000000e+000  result=40
08:37:48 Config A/D  Result=40
08:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:48 Get A/D filter: -9.255963e+061  result=40
08:37:48 Get A/D value=-858993460  result=40
08:37:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:37:48 Parameters OK
08:37:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:37:48 Set A/D data flow result=40
08:37:48 Set A/D channel type result=40
08:37:48 Set A/D encoding result=40
08:37:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:37:48 Set channel filter=0.000000e+000  result=40
08:37:48 Config A/D  Result=40
08:37:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:37:48 Get A/D filter: -9.255963e+061  result=40
08:37:48 Get A/D value=-858993460  result=40
08:37:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:37:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:37:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:37:48 Aux=
08:37:48 Message to Camera, serial 187876 queued
08:38:24 Received message from Master: op=PointingHead serial=187889
08:38:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:38:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:38:25 Point started: ret=0
08:38:25 point_skyscan result=0
08:38:26 Check angles
08:38:26 SkyScan query
08:38:26 SkyScan query done: ret=0  az=136.2<-9080  ze=-6.51<-12434  Statuses=0009 0008
08:38:26 Msec=0  True Az=136.2  Ze=-6.51  Az status=0009  Ze status=0008
08:38:26 Check angles
08:38:26 SkyScan query
08:38:27 SkyScan query done: ret=0  az=153.45<-10230  ze=-6.495<-12433  Statuses=0009 0008
08:38:27 Msec=750  True Az=153.45  Ze=-6.495  Az status=0009  Ze status=0008
08:38:27 Check angles
08:38:27 SkyScan query
08:38:28 SkyScan query done: ret=0  az=170.925<-11395  ze=-6.495<-12433  Statuses=0009 0008
08:38:28 Msec=1500  True Az=170.925  Ze=-6.495  Az status=0009  Ze status=0008
08:38:28 Check angles
08:38:28 SkyScan query
08:38:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:38:28 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:38:28 Message to Master queued w/err=0: serial=187889 error=0
08:38:33 Received message from Master: op=Filter serial=187890
08:38:33 Color wheel filter change from 0 to 0
08:38:33 FLIGetFilterPos err=0  currentPosition=0
08:38:33 FLIGetStepsRemaining err=0  RemainingSteps=0
08:38:33 Filter is already there-color wheel unchanged
08:38:34 Received message from Master: op=Shutter serial=187891
08:38:34 Shutter LASER close
08:38:34 Received message from Camera: op=State serial=187893
08:38:34 GetSingleValue result=40  Value=cccccccc
08:38:34 SkyScan query
08:38:34 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:38:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:38:34 Parameters OK
08:38:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:38:34 Set A/D data flow result=40
08:38:34 Set A/D channel type result=40
08:38:34 Set A/D encoding result=40
08:38:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:38:34 Set channel filter=0.000000e+000  result=40
08:38:34 Config A/D  Result=40
08:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:38:34 Get A/D filter: -9.255963e+061  result=40
08:38:34 Get A/D value=-858993460  result=40
08:38:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:38:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:38:34 Parameters OK
08:38:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:38:34 Set A/D data flow result=40
08:38:34 Set A/D channel type result=40
08:38:34 Set A/D encoding result=40
08:38:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:38:34 Set channel filter=0.000000e+000  result=40
08:38:34 Config A/D  Result=40
08:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:38:34 Get A/D filter: -9.255963e+061  result=40
08:38:34 Get A/D value=-858993460  result=40
08:38:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:38:34 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:38:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:38:34 Aux=
08:38:34 Message to Camera, serial 187893 queued
08:39:11 Received message from Master: op=PointingHead serial=187906
08:39:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:39:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:39:11 Point started: ret=0
08:39:11 point_skyscan result=0
08:39:12 Check angles
08:39:12 SkyScan query
08:39:13 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
08:39:13 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
08:39:13 Check angles
08:39:13 SkyScan query
08:39:13 SkyScan query done: ret=0  az=135.015<-9001  ze=6.495<-11567  Statuses=0009 0008
08:39:13 Msec=750  True Az=135.015  Ze=6.495  Az status=0009  Ze status=0008
08:39:14 Check angles
08:39:14 SkyScan query
08:39:14 SkyScan query done: ret=0  az=117.525<-7835  ze=6.495<-11567  Statuses=0009 0008
08:39:14 Msec=1500  True Az=117.525  Ze=6.495  Az status=0009  Ze status=0008
08:39:14 Check angles
08:39:14 SkyScan query
08:39:15 SkyScan query done: ret=0  az=113.01<-7534  ze=6.495<-11567  Statuses=0008 0008
08:39:15 Msec=2250  True Az=113.01  Ze=6.495  Az status=0008  Ze status=0008
08:39:15 Message to Master queued w/err=0: serial=187906 error=0
08:39:20 Received message from Master: op=Filter serial=187907
08:39:20 Color wheel filter change from 0 to 0
08:39:20 FLIGetFilterPos err=0  currentPosition=0
08:39:20 FLIGetStepsRemaining err=0  RemainingSteps=0
08:39:20 Filter is already there-color wheel unchanged
08:39:20 Received message from Master: op=Shutter serial=187908
08:39:20 Shutter LASER close
08:39:20 Received message from Camera: op=State serial=187910
08:39:20 GetSingleValue result=40  Value=cccccccc
08:39:20 SkyScan query
08:39:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:39:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:39:21 Parameters OK
08:39:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:39:21 Set A/D data flow result=40
08:39:21 Set A/D channel type result=40
08:39:21 Set A/D encoding result=40
08:39:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:39:21 Set channel filter=0.000000e+000  result=40
08:39:21 Config A/D  Result=40
08:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:39:21 Get A/D filter: -9.255963e+061  result=40
08:39:21 Get A/D value=-858993460  result=40
08:39:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:39:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:39:21 Parameters OK
08:39:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:39:21 Set A/D data flow result=40
08:39:21 Set A/D channel type result=40
08:39:21 Set A/D encoding result=40
08:39:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:39:21 Set channel filter=0.000000e+000  result=40
08:39:21 Config A/D  Result=40
08:39:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:39:21 Get A/D filter: -9.255963e+061  result=40
08:39:21 Get A/D value=-858993460  result=40
08:39:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:39:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:39:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:39:21 Aux=
08:39:21 Message to Camera, serial 187910 queued
08:39:58 Received message from Master: op=PointingHead serial=187923
08:39:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:39:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:39:58 Point started: ret=0
08:39:58 point_skyscan result=0
08:39:59 Check angles
08:39:59 SkyScan query
08:39:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.535<-13569  Statuses=0008 0009
08:39:59 Msec=0  True Az=112.995  Ze=-23.535  Az status=0008  Ze status=0009
08:39:59 Check angles
08:39:59 SkyScan query
08:40:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.505<-14967  Statuses=0008 0009
08:40:00 Msec=750  True Az=112.995  Ze=-44.505  Az status=0008  Ze status=0009
08:40:00 Check angles
08:40:00 SkyScan query
08:40:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.445<-16363  Statuses=0008 0009
08:40:01 Msec=1500  True Az=112.995  Ze=-65.445  Az status=0008  Ze status=0009
08:40:01 Check angles
08:40:01 SkyScan query
08:40:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.82<-17788  Statuses=0008 0009
08:40:02 Msec=2250  True Az=112.995  Ze=-86.82  Az status=0008  Ze status=0009
08:40:02 Check angles
08:40:02 SkyScan query
08:40:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.775<-19185  Statuses=0008 0009
08:40:02 Msec=3000  True Az=112.995  Ze=-107.775  Az status=0008  Ze status=0009
08:40:02 Check angles
08:40:02 SkyScan query
08:40:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.73<-20582  Statuses=0008 0009
08:40:03 Msec=3750  True Az=112.995  Ze=-128.73  Az status=0008  Ze status=0009
08:40:03 Check angles
08:40:03 SkyScan query
08:40:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.12<-22008  Statuses=0008 0009
08:40:04 Msec=4500  True Az=112.995  Ze=-150.12  Az status=0008  Ze status=0009
08:40:04 Check angles
08:40:04 SkyScan query
08:40:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.97<-23398  Statuses=0008 0009
08:40:05 Msec=5250  True Az=112.995  Ze=-170.97  Az status=0008  Ze status=0009
08:40:05 Check angles
08:40:05 SkyScan query
08:40:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:40:05 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:40:05 Message to Master queued w/err=0: serial=187923 error=0
08:40:10 Received message from Master: op=Filter serial=187924
08:40:10 Color wheel filter change from 0 to 0
08:40:10 FLIGetFilterPos err=0  currentPosition=0
08:40:10 FLIGetStepsRemaining err=0  RemainingSteps=0
08:40:10 Filter is already there-color wheel unchanged
08:40:10 Received message from Master: op=Shutter serial=187925
08:40:10 Shutter LASER open
08:40:11 Received message from Camera: op=State serial=187927
08:40:11 GetSingleValue result=40  Value=cccccccc
08:40:11 SkyScan query
08:40:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:40:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:11 Parameters OK
08:40:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:11 Set A/D data flow result=40
08:40:11 Set A/D channel type result=40
08:40:11 Set A/D encoding result=40
08:40:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:11 Set channel filter=0.000000e+000  result=40
08:40:11 Config A/D  Result=40
08:40:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:11 Get A/D filter: -9.255963e+061  result=40
08:40:11 Get A/D value=-858993460  result=40
08:40:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:11 Parameters OK
08:40:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:11 Set A/D data flow result=40
08:40:11 Set A/D channel type result=40
08:40:11 Set A/D encoding result=40
08:40:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:11 Set channel filter=0.000000e+000  result=40
08:40:11 Config A/D  Result=40
08:40:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:11 Get A/D filter: -9.255963e+061  result=40
08:40:11 Get A/D value=-858993460  result=40
08:40:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:40:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:40:11 Aux=
08:40:11 Message to Camera, serial 187927 queued
08:40:20 Received message from Master: op=Shutter serial=187937
08:40:20 Shutter LASER close
08:40:20 Received message from Master: op=PointingHead serial=187941
08:40:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:40:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:40:20 Point started: ret=0
08:40:20 point_skyscan result=0
08:40:21 Check angles
08:40:21 SkyScan query
08:40:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
08:40:22 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
08:40:22 Check angles
08:40:22 SkyScan query
08:40:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
08:40:22 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
08:40:23 Check angles
08:40:23 SkyScan query
08:40:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
08:40:23 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
08:40:23 Check angles
08:40:23 SkyScan query
08:40:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
08:40:24 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
08:40:24 Check angles
08:40:24 SkyScan query
08:40:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
08:40:25 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
08:40:25 Check angles
08:40:25 SkyScan query
08:40:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.545<-14503  Statuses=0008 0009
08:40:26 Msec=3750  True Az=112.995  Ze=-37.545  Az status=0008  Ze status=0009
08:40:26 Check angles
08:40:26 SkyScan query
08:40:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.59<-13106  Statuses=0008 0009
08:40:26 Msec=4500  True Az=112.995  Ze=-16.59  Az status=0008  Ze status=0009
08:40:26 Check angles
08:40:26 SkyScan query
08:40:27 SkyScan query done: ret=0  az=112.995<-7533  ze=4.305<-11713  Statuses=0008 0009
08:40:27 Msec=5250  True Az=112.995  Ze=4.305  Az status=0008  Ze status=0009
08:40:27 Check angles
08:40:27 SkyScan query
08:40:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:40:28 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:40:28 Message to Master queued w/err=0: serial=187941 error=0
08:40:33 Received message from Master: op=Filter serial=187942
08:40:33 Color wheel filter change from 0 to 0
08:40:33 FLIGetFilterPos err=0  currentPosition=0
08:40:33 FLIGetStepsRemaining err=0  RemainingSteps=0
08:40:33 Filter is already there-color wheel unchanged
08:40:33 Received message from Master: op=Shutter serial=187943
08:40:33 Shutter LASER close
08:40:33 Received message from Camera: op=State serial=187945
08:40:33 GetSingleValue result=40  Value=cccccccc
08:40:33 SkyScan query
08:40:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:40:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:34 Parameters OK
08:40:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:34 Set A/D data flow result=40
08:40:34 Set A/D channel type result=40
08:40:34 Set A/D encoding result=40
08:40:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:34 Set channel filter=0.000000e+000  result=40
08:40:34 Config A/D  Result=40
08:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:34 Get A/D filter: -9.255963e+061  result=40
08:40:34 Get A/D value=-858993460  result=40
08:40:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:40:34 Parameters OK
08:40:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:40:34 Set A/D data flow result=40
08:40:34 Set A/D channel type result=40
08:40:34 Set A/D encoding result=40
08:40:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:40:34 Set channel filter=0.000000e+000  result=40
08:40:34 Config A/D  Result=40
08:40:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:40:34 Get A/D filter: -9.255963e+061  result=40
08:40:34 Get A/D value=-858993460  result=40
08:40:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:40:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:40:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:40:34 Aux=
08:40:34 Message to Camera, serial 187945 queued
08:41:10 Received message from Master: op=PointingHead serial=187957
08:41:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:41:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:41:10 Point started: ret=0
08:41:10 point_skyscan result=0
08:41:11 Check angles
08:41:11 SkyScan query
08:41:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:41:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:41:11 Message to Master queued w/err=0: serial=187957 error=0
08:41:16 Received message from Master: op=Filter serial=187958
08:41:16 Color wheel filter change from 0 to 0
08:41:16 FLIGetFilterPos err=0  currentPosition=0
08:41:16 FLIGetStepsRemaining err=0  RemainingSteps=0
08:41:16 Filter is already there-color wheel unchanged
08:41:16 Received message from Master: op=Shutter serial=187959
08:41:16 Shutter LASER close
08:41:17 Received message from Camera: op=State serial=187961
08:41:17 GetSingleValue result=40  Value=cccccccc
08:41:17 SkyScan query
08:41:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:41:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:41:17 Parameters OK
08:41:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:41:17 Set A/D data flow result=40
08:41:17 Set A/D channel type result=40
08:41:17 Set A/D encoding result=40
08:41:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:41:17 Set channel filter=0.000000e+000  result=40
08:41:17 Config A/D  Result=40
08:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:41:17 Get A/D filter: -9.255963e+061  result=40
08:41:17 Get A/D value=-858993460  result=40
08:41:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:41:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:41:17 Parameters OK
08:41:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:41:17 Set A/D data flow result=40
08:41:17 Set A/D channel type result=40
08:41:17 Set A/D encoding result=40
08:41:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:41:17 Set channel filter=0.000000e+000  result=40
08:41:17 Config A/D  Result=40
08:41:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:41:17 Get A/D filter: -9.255963e+061  result=40
08:41:17 Get A/D value=-858993460  result=40
08:41:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:41:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:41:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:41:17 Aux=
08:41:17 Message to Camera, serial 187961 queued
08:41:54 Received message from Master: op=PointingHead serial=187974
08:41:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:41:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:41:54 Point started: ret=0
08:41:54 point_skyscan result=0
08:41:55 Check angles
08:41:55 SkyScan query
08:41:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:41:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:41:56 Message to Master queued w/err=0: serial=187974 error=0
08:42:01 Received message from Master: op=Filter serial=187975
08:42:01 Color wheel filter change from 0 to 0
08:42:01 FLIGetFilterPos err=0  currentPosition=0
08:42:01 FLIGetStepsRemaining err=0  RemainingSteps=0
08:42:01 Filter is already there-color wheel unchanged
08:42:01 Received message from Master: op=Shutter serial=187976
08:42:01 Shutter LASER close
08:42:01 Received message from Camera: op=State serial=187978
08:42:01 GetSingleValue result=40  Value=cccccccc
08:42:01 SkyScan query
08:42:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:42:01 Parameters OK
08:42:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:42:01 Set A/D data flow result=40
08:42:01 Set A/D channel type result=40
08:42:01 Set A/D encoding result=40
08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:42:01 Set channel filter=0.000000e+000  result=40
08:42:01 Config A/D  Result=40
08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:42:01 Get A/D filter: -9.255963e+061  result=40
08:42:01 Get A/D value=-858993460  result=40
08:42:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:42:01 Parameters OK
08:42:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:42:01 Set A/D data flow result=40
08:42:01 Set A/D channel type result=40
08:42:01 Set A/D encoding result=40
08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:42:01 Set channel filter=0.000000e+000  result=40
08:42:01 Config A/D  Result=40
08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:42:01 Get A/D filter: -9.255963e+061  result=40
08:42:01 Get A/D value=-858993460  result=40
08:42:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:42:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:42:01 Aux=
08:42:01 Message to Camera, serial 187978 queued
08:42:38 Received message from Master: op=PointingHead serial=187991
08:42:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:42:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:42:39 Point started: ret=0
08:42:39 point_skyscan result=0
08:42:39 Check angles
08:42:39 SkyScan query
08:42:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:42:40 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:42:40 Message to Master queued w/err=0: serial=187991 error=0
08:42:45 Received message from Master: op=Filter serial=187992
08:42:45 Color wheel filter change from 0 to 0
08:42:45 FLIGetFilterPos err=0  currentPosition=0
08:42:45 FLIGetStepsRemaining err=0  RemainingSteps=0
08:42:45 Filter is already there-color wheel unchanged
08:42:45 Received message from Master: op=Shutter serial=187993
08:42:45 Shutter LASER close
08:42:45 Received message from Camera: op=State serial=187995
08:42:45 GetSingleValue result=40  Value=cccccccc
08:42:45 SkyScan query
08:42:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:42:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:42:46 Parameters OK
08:42:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:42:46 Set A/D data flow result=40
08:42:46 Set A/D channel type result=40
08:42:46 Set A/D encoding result=40
08:42:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:42:46 Set channel filter=0.000000e+000  result=40
08:42:46 Config A/D  Result=40
08:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:42:46 Get A/D filter: -9.255963e+061  result=40
08:42:46 Get A/D value=-858993460  result=40
08:42:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:42:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:42:46 Parameters OK
08:42:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:42:46 Set A/D data flow result=40
08:42:46 Set A/D channel type result=40
08:42:46 Set A/D encoding result=40
08:42:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:42:46 Set channel filter=0.000000e+000  result=40
08:42:46 Config A/D  Result=40
08:42:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:42:46 Get A/D filter: -9.255963e+061  result=40
08:42:46 Get A/D value=-858993460  result=40
08:42:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:42:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:42:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:42:46 Aux=
08:42:46 Message to Camera, serial 187995 queued
08:43:22 Received message from Master: op=PointingHead serial=188008
08:43:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:43:22 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:43:23 Point started: ret=0
08:43:23 point_skyscan result=0
08:43:24 Check angles
08:43:24 SkyScan query
08:43:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.055<-13537  Statuses=0008 0009
08:43:24 Msec=0  True Az=112.995  Ze=-23.055  Az status=0008  Ze status=0009
08:43:24 Check angles
08:43:24 SkyScan query
08:43:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.025<-14935  Statuses=0008 0009
08:43:25 Msec=750  True Az=112.995  Ze=-44.025  Az status=0008  Ze status=0009
08:43:25 Check angles
08:43:25 SkyScan query
08:43:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.98<-16332  Statuses=0008 0009
08:43:26 Msec=1500  True Az=112.995  Ze=-64.98  Az status=0008  Ze status=0009
08:43:26 Check angles
08:43:26 SkyScan query
08:43:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.37<-17758  Statuses=0008 0009
08:43:26 Msec=2250  True Az=112.995  Ze=-86.37  Az status=0008  Ze status=0009
08:43:27 Check angles
08:43:27 SkyScan query
08:43:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.325<-19155  Statuses=0008 0009
08:43:27 Msec=3000  True Az=112.995  Ze=-107.325  Az status=0008  Ze status=0009
08:43:27 Check angles
08:43:27 SkyScan query
08:43:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.265<-20551  Statuses=0008 0009
08:43:28 Msec=3750  True Az=112.995  Ze=-128.265  Az status=0008  Ze status=0009
08:43:28 Check angles
08:43:28 SkyScan query
08:43:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.235<-21949  Statuses=0008 0009
08:43:29 Msec=4500  True Az=112.995  Ze=-149.235  Az status=0008  Ze status=0009
08:43:29 Check angles
08:43:29 SkyScan query
08:43:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.175<-23345  Statuses=0008 0009
08:43:29 Msec=5250  True Az=112.995  Ze=-170.175  Az status=0008  Ze status=0009
08:43:30 Check angles
08:43:30 SkyScan query
08:43:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:43:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:43:30 Message to Master queued w/err=0: serial=188008 error=0
08:43:35 Received message from Master: op=Filter serial=188009
08:43:35 Color wheel filter change from 0 to 0
08:43:35 FLIGetFilterPos err=0  currentPosition=0
08:43:35 FLIGetStepsRemaining err=0  RemainingSteps=0
08:43:35 Filter is already there-color wheel unchanged
08:43:35 Received message from Master: op=Shutter serial=188010
08:43:35 Shutter LASER open
08:43:36 Received message from Camera: op=State serial=188012
08:43:36 GetSingleValue result=40  Value=cccccccc
08:43:36 SkyScan query
08:43:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:43:36 Parameters OK
08:43:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:43:36 Set A/D data flow result=40
08:43:36 Set A/D channel type result=40
08:43:36 Set A/D encoding result=40
08:43:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:43:36 Set channel filter=0.000000e+000  result=40
08:43:36 Config A/D  Result=40
08:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:43:36 Get A/D filter: -9.255963e+061  result=40
08:43:36 Get A/D value=-858993460  result=40
08:43:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:43:36 Parameters OK
08:43:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:43:36 Set A/D data flow result=40
08:43:36 Set A/D channel type result=40
08:43:36 Set A/D encoding result=40
08:43:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:43:36 Set channel filter=0.000000e+000  result=40
08:43:36 Config A/D  Result=40
08:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:43:36 Get A/D filter: -9.255963e+061  result=40
08:43:36 Get A/D value=-858993460  result=40
08:43:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:43:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:43:36 Aux=
08:43:36 Message to Camera, serial 188012 queued
08:43:45 Received message from Master: op=Shutter serial=188022
08:43:45 Shutter LASER close
08:43:45 Received message from Master: op=PointingHead serial=188026
08:43:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:43:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:43:45 Point started: ret=0
08:43:45 point_skyscan result=0
08:43:46 Check angles
08:43:46 SkyScan query
08:43:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.445<-21563  Statuses=0008 0009
08:43:47 Msec=0  True Az=112.995  Ze=-143.445  Az status=0008  Ze status=0009
08:43:47 Check angles
08:43:47 SkyScan query
08:43:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.49<-20166  Statuses=0008 0009
08:43:48 Msec=750  True Az=112.995  Ze=-122.49  Az status=0008  Ze status=0009
08:43:48 Check angles
08:43:48 SkyScan query
08:43:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.52<-18768  Statuses=0008 0009
08:43:48 Msec=1500  True Az=112.995  Ze=-101.52  Az status=0008  Ze status=0009
[UTC 2019-3-9  08:43:48]
08:43:49 Check angles
08:43:49 SkyScan query
08:43:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-78.81<-17254  Statuses=0008 0009
08:43:49 Msec=2250  True Az=112.995  Ze=-78.81  Az status=0008  Ze status=0009
08:43:49 Check angles
08:43:49 SkyScan query
08:43:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.625<-15975  Statuses=0008 0009
08:43:50 Msec=3000  True Az=112.995  Ze=-59.625  Az status=0008  Ze status=0009
08:43:50 Check angles
08:43:50 SkyScan query
08:43:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.67<-14578  Statuses=0008 0009
08:43:51 Msec=3750  True Az=112.995  Ze=-38.67  Az status=0008  Ze status=0009
08:43:51 Check angles
08:43:51 SkyScan query
08:43:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.715<-13181  Statuses=0008 0009
08:43:51 Msec=4500  True Az=112.995  Ze=-17.715  Az status=0008  Ze status=0009
08:43:51 Check angles
08:43:51 SkyScan query
08:43:52 SkyScan query done: ret=0  az=112.995<-7533  ze=3.255<-11783  Statuses=0008 0009
08:43:52 Msec=5250  True Az=112.995  Ze=3.255  Az status=0008  Ze status=0009
08:43:52 Check angles
08:43:52 SkyScan query
08:43:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:43:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:43:53 Message to Master queued w/err=0: serial=188026 error=0
08:43:58 Received message from Master: op=Filter serial=188027
08:43:58 Color wheel filter change from 0 to 0
08:43:58 FLIGetFilterPos err=0  currentPosition=0
08:43:58 FLIGetStepsRemaining err=0  RemainingSteps=0
08:43:58 Filter is already there-color wheel unchanged
08:43:58 Received message from Master: op=Shutter serial=188028
08:43:58 Shutter LASER close
08:43:58 Received message from Camera: op=State serial=188030
08:43:58 GetSingleValue result=40  Value=cccccccc
08:43:58 SkyScan query
08:43:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:43:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:43:59 Parameters OK
08:43:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:43:59 Set A/D data flow result=40
08:43:59 Set A/D channel type result=40
08:43:59 Set A/D encoding result=40
08:43:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:43:59 Set channel filter=0.000000e+000  result=40
08:43:59 Config A/D  Result=40
08:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:43:59 Get A/D filter: -9.255963e+061  result=40
08:43:59 Get A/D value=-858993460  result=40
08:43:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:43:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:43:59 Parameters OK
08:43:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:43:59 Set A/D data flow result=40
08:43:59 Set A/D channel type result=40
08:43:59 Set A/D encoding result=40
08:43:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:43:59 Set channel filter=0.000000e+000  result=40
08:43:59 Config A/D  Result=40
08:43:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:43:59 Get A/D filter: -9.255963e+061  result=40
08:43:59 Get A/D value=-858993460  result=40
08:43:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:43:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:43:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:43:59 Aux=
08:43:59 Message to Camera, serial 188030 queued
08:44:36 Received message from Master: op=PointingHead serial=188043
08:44:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:44:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:44:36 Point started: ret=0
08:44:36 point_skyscan result=0
08:44:37 Check angles
08:44:37 SkyScan query
08:44:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:44:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:44:37 Message to Master queued w/err=0: serial=188043 error=0
08:44:42 Received message from Master: op=Filter serial=188044
08:44:42 Color wheel filter change from 0 to 0
08:44:42 FLIGetFilterPos err=0  currentPosition=0
08:44:42 FLIGetStepsRemaining err=0  RemainingSteps=0
08:44:42 Filter is already there-color wheel unchanged
08:44:42 Received message from Master: op=Shutter serial=188045
08:44:42 Shutter LASER close
08:44:42 Received message from Camera: op=State serial=188047
08:44:42 GetSingleValue result=40  Value=cccccccc
08:44:42 SkyScan query
08:44:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:44:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:44:43 Parameters OK
08:44:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:44:43 Set A/D data flow result=40
08:44:43 Set A/D channel type result=40
08:44:43 Set A/D encoding result=40
08:44:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:44:43 Set channel filter=0.000000e+000  result=40
08:44:43 Config A/D  Result=40
08:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:44:43 Get A/D filter: -9.255963e+061  result=40
08:44:43 Get A/D value=-858993460  result=40
08:44:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:44:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:44:43 Parameters OK
08:44:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:44:43 Set A/D data flow result=40
08:44:43 Set A/D channel type result=40
08:44:43 Set A/D encoding result=40
08:44:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:44:43 Set channel filter=0.000000e+000  result=40
08:44:43 Config A/D  Result=40
08:44:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:44:43 Get A/D filter: -9.255963e+061  result=40
08:44:43 Get A/D value=-858993460  result=40
08:44:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:44:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:44:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:44:43 Aux=
08:44:43 Message to Camera, serial 188047 queued
08:45:20 Received message from Master: op=PointingHead serial=188060
08:45:20 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:45:20 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:45:20 Point started: ret=0
08:45:20 point_skyscan result=0
08:45:21 Check angles
08:45:21 SkyScan query
08:45:22 SkyScan query done: ret=0  az=136.38<-9092  ze=-6.51<-12434  Statuses=0009 0008
08:45:22 Msec=0  True Az=136.38  Ze=-6.51  Az status=0009  Ze status=0008
08:45:22 Check angles
08:45:22 SkyScan query
08:45:22 SkyScan query done: ret=0  az=154.14<-10276  ze=-6.495<-12433  Statuses=0009 0008
08:45:22 Msec=750  True Az=154.14  Ze=-6.495  Az status=0009  Ze status=0008
08:45:23 Check angles
08:45:23 SkyScan query
08:45:23 SkyScan query done: ret=0  az=171.675<-11445  ze=-6.495<-12433  Statuses=0009 0008
08:45:23 Msec=1500  True Az=171.675  Ze=-6.495  Az status=0009  Ze status=0008
08:45:23 Check angles
08:45:23 SkyScan query
08:45:24 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:45:24 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:45:24 Message to Master queued w/err=0: serial=188060 error=0
08:45:29 Received message from Master: op=Filter serial=188061
08:45:29 Color wheel filter change from 0 to 0
08:45:29 FLIGetFilterPos err=0  currentPosition=0
08:45:29 FLIGetStepsRemaining err=0  RemainingSteps=0
08:45:29 Filter is already there-color wheel unchanged
08:45:29 Received message from Master: op=Shutter serial=188062
08:45:29 Shutter LASER close
08:45:29 Received message from Camera: op=State serial=188064
08:45:29 GetSingleValue result=40  Value=cccccccc
08:45:29 SkyScan query
08:45:30 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:45:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:45:30 Parameters OK
08:45:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:45:30 Set A/D data flow result=40
08:45:30 Set A/D channel type result=40
08:45:30 Set A/D encoding result=40
08:45:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:45:30 Set channel filter=0.000000e+000  result=40
08:45:30 Config A/D  Result=40
08:45:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:45:30 Get A/D filter: -9.255963e+061  result=40
08:45:30 Get A/D value=-858993460  result=40
08:45:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:45:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:45:30 Parameters OK
08:45:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:45:30 Set A/D data flow result=40
08:45:30 Set A/D channel type result=40
08:45:30 Set A/D encoding result=40
08:45:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:45:30 Set channel filter=0.000000e+000  result=40
08:45:30 Config A/D  Result=40
08:45:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:45:30 Get A/D filter: -9.255963e+061  result=40
08:45:30 Get A/D value=-858993460  result=40
08:45:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:45:30 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:45:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:45:30 Aux=
08:45:30 Message to Camera, serial 188064 queued
08:46:07 Received message from Master: op=PointingHead serial=188077
08:46:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:46:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:46:07 Point started: ret=0
08:46:07 point_skyscan result=0
08:46:08 Check angles
08:46:08 SkyScan query
08:46:08 SkyScan query done: ret=0  az=152.97<-10198  ze=6.51<-11566  Statuses=0009 0008
08:46:08 Msec=0  True Az=152.97  Ze=6.51  Az status=0009  Ze status=0008
08:46:08 Check angles
08:46:08 SkyScan query
08:46:09 SkyScan query done: ret=0  az=135.165<-9011  ze=6.495<-11567  Statuses=0009 0008
08:46:09 Msec=750  True Az=135.165  Ze=6.495  Az status=0009  Ze status=0008
08:46:09 Check angles
08:46:09 SkyScan query
08:46:10 SkyScan query done: ret=0  az=117.285<-7819  ze=6.495<-11567  Statuses=0009 0008
08:46:10 Msec=1500  True Az=117.285  Ze=6.495  Az status=0009  Ze status=0008
08:46:10 Check angles
08:46:10 SkyScan query
08:46:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:46:10 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:46:10 Message to Master queued w/err=0: serial=188077 error=0
08:46:15 Received message from Master: op=Filter serial=188078
08:46:15 Color wheel filter change from 0 to 0
08:46:15 FLIGetFilterPos err=0  currentPosition=0
08:46:15 FLIGetStepsRemaining err=0  RemainingSteps=0
08:46:15 Filter is already there-color wheel unchanged
08:46:16 Received message from Master: op=Shutter serial=188079
08:46:16 Shutter LASER close
08:46:16 Received message from Camera: op=State serial=188081
08:46:16 GetSingleValue result=40  Value=cccccccc
08:46:16 SkyScan query
08:46:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:46:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:46:16 Parameters OK
08:46:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:46:16 Set A/D data flow result=40
08:46:16 Set A/D channel type result=40
08:46:16 Set A/D encoding result=40
08:46:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:46:16 Set channel filter=0.000000e+000  result=40
08:46:16 Config A/D  Result=40
08:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:46:16 Get A/D filter: -9.255963e+061  result=40
08:46:16 Get A/D value=-858993460  result=40
08:46:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:46:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:46:16 Parameters OK
08:46:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:46:16 Set A/D data flow result=40
08:46:16 Set A/D channel type result=40
08:46:16 Set A/D encoding result=40
08:46:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:46:16 Set channel filter=0.000000e+000  result=40
08:46:16 Config A/D  Result=40
08:46:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:46:16 Get A/D filter: -9.255963e+061  result=40
08:46:16 Get A/D value=-858993460  result=40
08:46:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:46:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:46:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:46:16 Aux=
08:46:16 Message to Camera, serial 188081 queued
08:46:53 Received message from Master: op=PointingHead serial=188094
08:46:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:46:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:46:53 Point started: ret=0
08:46:53 point_skyscan result=0
08:46:54 Check angles
08:46:54 SkyScan query
08:46:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.01<-13534  Statuses=0008 0009
08:46:55 Msec=0  True Az=112.995  Ze=-23.01  Az status=0008  Ze status=0009
08:46:55 Check angles
08:46:55 SkyScan query
08:46:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.98<-14932  Statuses=0008 0009
08:46:56 Msec=750  True Az=112.995  Ze=-43.98  Az status=0008  Ze status=0009
08:46:56 Check angles
08:46:56 SkyScan query
08:46:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.92<-16328  Statuses=0008 0009
08:46:56 Msec=1500  True Az=112.995  Ze=-64.92  Az status=0008  Ze status=0009
08:46:56 Check angles
08:46:56 SkyScan query
08:46:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.89<-17726  Statuses=0008 0009
08:46:57 Msec=2250  True Az=112.995  Ze=-85.89  Az status=0008  Ze status=0009
08:46:57 Check angles
08:46:57 SkyScan query
08:46:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.28<-19152  Statuses=0008 0009
08:46:58 Msec=3000  True Az=112.995  Ze=-107.28  Az status=0008  Ze status=0009
08:46:58 Check angles
08:46:58 SkyScan query
08:46:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.22<-20548  Statuses=0008 0009
08:46:59 Msec=3750  True Az=112.995  Ze=-128.22  Az status=0008  Ze status=0009
08:46:59 Check angles
08:46:59 SkyScan query
08:46:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.19<-21946  Statuses=0008 0009
08:46:59 Msec=4500  True Az=112.995  Ze=-149.19  Az status=0008  Ze status=0009
08:46:59 Check angles
08:46:59 SkyScan query
08:47:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.115<-23341  Statuses=0008 0009
08:47:00 Msec=5250  True Az=112.995  Ze=-170.115  Az status=0008  Ze status=0009
08:47:00 Check angles
08:47:00 SkyScan query
08:47:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:47:01 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:47:01 Message to Master queued w/err=0: serial=188094 error=0
08:47:06 Received message from Master: op=Filter serial=188095
08:47:06 Color wheel filter change from 0 to 0
08:47:06 FLIGetFilterPos err=0  currentPosition=0
08:47:06 FLIGetStepsRemaining err=0  RemainingSteps=0
08:47:06 Filter is already there-color wheel unchanged
08:47:06 Received message from Master: op=Shutter serial=188096
08:47:06 Shutter LASER open
08:47:06 Received message from Camera: op=State serial=188098
08:47:06 GetSingleValue result=40  Value=cccccccc
08:47:06 SkyScan query
08:47:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:47:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:07 Parameters OK
08:47:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:07 Set A/D data flow result=40
08:47:07 Set A/D channel type result=40
08:47:07 Set A/D encoding result=40
08:47:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:07 Set channel filter=0.000000e+000  result=40
08:47:07 Config A/D  Result=40
08:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:07 Get A/D filter: -9.255963e+061  result=40
08:47:07 Get A/D value=-858993460  result=40
08:47:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:07 Parameters OK
08:47:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:07 Set A/D data flow result=40
08:47:07 Set A/D channel type result=40
08:47:07 Set A/D encoding result=40
08:47:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:07 Set channel filter=0.000000e+000  result=40
08:47:07 Config A/D  Result=40
08:47:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:07 Get A/D filter: -9.255963e+061  result=40
08:47:07 Get A/D value=-858993460  result=40
08:47:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:47:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:47:07 Aux=
08:47:07 Message to Camera, serial 188098 queued
08:47:15 Received message from Master: op=Shutter serial=188108
08:47:15 Shutter LASER close
08:47:16 Received message from Master: op=PointingHead serial=188112
08:47:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:47:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:47:16 Point started: ret=0
08:47:16 point_skyscan result=0
08:47:17 Check angles
08:47:17 SkyScan query
08:47:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.755<-21517  Statuses=0008 0009
08:47:17 Msec=0  True Az=112.995  Ze=-142.755  Az status=0008  Ze status=0009
08:47:17 Check angles
08:47:17 SkyScan query
08:47:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.395<-20093  Statuses=0008 0009
08:47:18 Msec=750  True Az=112.995  Ze=-121.395  Az status=0008  Ze status=0009
08:47:18 Check angles
08:47:18 SkyScan query
08:47:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.425<-18695  Statuses=0008 0009
08:47:19 Msec=1500  True Az=112.995  Ze=-100.425  Az status=0008  Ze status=0009
08:47:19 Check angles
08:47:19 SkyScan query
08:47:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
08:47:20 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
08:47:20 Check angles
08:47:20 SkyScan query
08:47:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
08:47:20 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
08:47:20 Check angles
08:47:20 SkyScan query
08:47:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
08:47:21 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
08:47:21 Check angles
08:47:21 SkyScan query
08:47:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
08:47:22 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
08:47:22 Check angles
08:47:22 SkyScan query
08:47:23 SkyScan query done: ret=0  az=112.995<-7533  ze=4.305<-11713  Statuses=0008 0009
08:47:23 Msec=5250  True Az=112.995  Ze=4.305  Az status=0008  Ze status=0009
08:47:23 Check angles
08:47:23 SkyScan query
08:47:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:47:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:47:23 Message to Master queued w/err=0: serial=188112 error=0
08:47:28 Received message from Master: op=Filter serial=188113
08:47:28 Color wheel filter change from 0 to 0
08:47:28 FLIGetFilterPos err=0  currentPosition=0
08:47:28 FLIGetStepsRemaining err=0  RemainingSteps=0
08:47:28 Filter is already there-color wheel unchanged
08:47:28 Received message from Master: op=Shutter serial=188114
08:47:28 Shutter LASER close
08:47:29 Received message from Camera: op=State serial=188116
08:47:29 GetSingleValue result=40  Value=cccccccc
08:47:29 SkyScan query
08:47:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:47:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:29 Parameters OK
08:47:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:29 Set A/D data flow result=40
08:47:29 Set A/D channel type result=40
08:47:29 Set A/D encoding result=40
08:47:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:29 Set channel filter=0.000000e+000  result=40
08:47:29 Config A/D  Result=40
08:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:29 Get A/D filter: -9.255963e+061  result=40
08:47:29 Get A/D value=-858993460  result=40
08:47:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:47:29 Parameters OK
08:47:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:47:29 Set A/D data flow result=40
08:47:29 Set A/D channel type result=40
08:47:29 Set A/D encoding result=40
08:47:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:47:29 Set channel filter=0.000000e+000  result=40
08:47:29 Config A/D  Result=40
08:47:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:47:29 Get A/D filter: -9.255963e+061  result=40
08:47:29 Get A/D value=-858993460  result=40
08:47:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:47:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:47:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:47:29 Aux=
08:47:29 Message to Camera, serial 188116 queued
08:48:06 Received message from Master: op=PointingHead serial=188129
08:48:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:48:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:48:06 Point started: ret=0
08:48:06 point_skyscan result=0
08:48:07 Check angles
08:48:07 SkyScan query
08:48:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:48:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:48:08 Message to Master queued w/err=0: serial=188129 error=0
08:48:13 Received message from Master: op=Filter serial=188130
08:48:13 Color wheel filter change from 0 to 0
08:48:13 FLIGetFilterPos err=0  currentPosition=0
08:48:13 FLIGetStepsRemaining err=0  RemainingSteps=0
08:48:13 Filter is already there-color wheel unchanged
08:48:13 Received message from Master: op=Shutter serial=188131
08:48:13 Shutter LASER close
08:48:13 Received message from Camera: op=State serial=188133
08:48:13 GetSingleValue result=40  Value=cccccccc
08:48:13 SkyScan query
08:48:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:48:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:48:13 Parameters OK
08:48:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:48:13 Set A/D data flow result=40
08:48:13 Set A/D channel type result=40
08:48:13 Set A/D encoding result=40
08:48:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:48:13 Set channel filter=0.000000e+000  result=40
08:48:13 Config A/D  Result=40
08:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:48:13 Get A/D filter: -9.255963e+061  result=40
08:48:13 Get A/D value=-858993460  result=40
08:48:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:48:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:48:13 Parameters OK
08:48:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:48:13 Set A/D data flow result=40
08:48:13 Set A/D channel type result=40
08:48:13 Set A/D encoding result=40
08:48:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:48:13 Set channel filter=0.000000e+000  result=40
08:48:13 Config A/D  Result=40
08:48:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:48:13 Get A/D filter: -9.255963e+061  result=40
08:48:13 Get A/D value=-858993460  result=40
08:48:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:48:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:48:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:48:13 Aux=
08:48:13 Message to Camera, serial 188133 queued
08:48:50 Received message from Master: op=PointingHead serial=188146
08:48:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:48:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:48:51 Point started: ret=0
08:48:51 point_skyscan result=0
08:48:51 Check angles
08:48:51 SkyScan query
08:48:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:48:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:48:52 Message to Master queued w/err=0: serial=188146 error=0
08:48:57 Received message from Master: op=Filter serial=188147
08:48:57 Color wheel filter change from 0 to 0
08:48:57 FLIGetFilterPos err=0  currentPosition=0
08:48:57 FLIGetStepsRemaining err=0  RemainingSteps=0
08:48:57 Filter is already there-color wheel unchanged
08:48:57 Received message from Master: op=Shutter serial=188148
08:48:57 Shutter LASER close
08:48:57 Received message from Camera: op=State serial=188150
08:48:57 GetSingleValue result=40  Value=cccccccc
08:48:57 SkyScan query
08:48:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:48:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:48:58 Parameters OK
08:48:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:48:58 Set A/D data flow result=40
08:48:58 Set A/D channel type result=40
08:48:58 Set A/D encoding result=40
08:48:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:48:58 Set channel filter=0.000000e+000  result=40
08:48:58 Config A/D  Result=40
08:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:48:58 Get A/D filter: -9.255963e+061  result=40
08:48:58 Get A/D value=-858993460  result=40
08:48:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:48:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:48:58 Parameters OK
08:48:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:48:58 Set A/D data flow result=40
08:48:58 Set A/D channel type result=40
08:48:58 Set A/D encoding result=40
08:48:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:48:58 Set channel filter=0.000000e+000  result=40
08:48:58 Config A/D  Result=40
08:48:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:48:58 Get A/D filter: -9.255963e+061  result=40
08:48:58 Get A/D value=-858993460  result=40
08:48:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:48:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:48:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:48:58 Aux=
08:48:58 Message to Camera, serial 188150 queued
08:49:35 Received message from Master: op=PointingHead serial=188163
08:49:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:49:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:49:35 Point started: ret=0
08:49:35 point_skyscan result=0
08:49:36 Check angles
08:49:36 SkyScan query
08:49:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:49:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:49:36 Message to Master queued w/err=0: serial=188163 error=0
08:49:41 Received message from Master: op=Filter serial=188164
08:49:41 Color wheel filter change from 0 to 0
08:49:41 FLIGetFilterPos err=0  currentPosition=0
08:49:41 FLIGetStepsRemaining err=0  RemainingSteps=0
08:49:41 Filter is already there-color wheel unchanged
08:49:41 Received message from Master: op=Shutter serial=188165
08:49:41 Shutter LASER close
08:49:41 Received message from Camera: op=State serial=188167
08:49:41 GetSingleValue result=40  Value=cccccccc
08:49:41 SkyScan query
08:49:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:49:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:49:42 Parameters OK
08:49:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:49:42 Set A/D data flow result=40
08:49:42 Set A/D channel type result=40
08:49:42 Set A/D encoding result=40
08:49:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:49:42 Set channel filter=0.000000e+000  result=40
08:49:42 Config A/D  Result=40
08:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:49:42 Get A/D filter: -9.255963e+061  result=40
08:49:42 Get A/D value=-858993460  result=40
08:49:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:49:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:49:42 Parameters OK
08:49:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:49:42 Set A/D data flow result=40
08:49:42 Set A/D channel type result=40
08:49:42 Set A/D encoding result=40
08:49:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:49:42 Set channel filter=0.000000e+000  result=40
08:49:42 Config A/D  Result=40
08:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:49:42 Get A/D filter: -9.255963e+061  result=40
08:49:42 Get A/D value=-858993460  result=40
08:49:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:49:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:49:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:49:42 Aux=
08:49:42 Message to Camera, serial 188167 queued
08:50:19 Received message from Master: op=PointingHead serial=188180
08:50:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:50:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:50:19 Point started: ret=0
08:50:19 point_skyscan result=0
08:50:20 Check angles
08:50:20 SkyScan query
08:50:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.52<-13568  Statuses=0008 0009
08:50:21 Msec=0  True Az=112.995  Ze=-23.52  Az status=0008  Ze status=0009
08:50:21 Check angles
08:50:21 SkyScan query
08:50:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
08:50:21 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
08:50:22 Check angles
08:50:22 SkyScan query
08:50:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.43<-16362  Statuses=0008 0009
08:50:22 Msec=1500  True Az=112.995  Ze=-65.43  Az status=0008  Ze status=0009
08:50:22 Check angles
08:50:22 SkyScan query
08:50:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.4<-17760  Statuses=0008 0009
08:50:23 Msec=2250  True Az=112.995  Ze=-86.4  Az status=0008  Ze status=0009
08:50:23 Check angles
08:50:23 SkyScan query
08:50:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.34<-19156  Statuses=0008 0009
08:50:24 Msec=3000  True Az=112.995  Ze=-107.34  Az status=0008  Ze status=0009
08:50:24 Check angles
08:50:24 SkyScan query
08:50:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.28<-20552  Statuses=0008 0009
08:50:24 Msec=3750  True Az=112.995  Ze=-128.28  Az status=0008  Ze status=0009
08:50:25 Check angles
08:50:25 SkyScan query
08:50:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.25<-21950  Statuses=0008 0009
08:50:25 Msec=4500  True Az=112.995  Ze=-149.25  Az status=0008  Ze status=0009
08:50:25 Check angles
08:50:25 SkyScan query
08:50:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.19<-23346  Statuses=0008 0009
08:50:26 Msec=5250  True Az=112.995  Ze=-170.19  Az status=0008  Ze status=0009
08:50:26 Check angles
08:50:26 SkyScan query
08:50:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:50:27 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:50:27 Message to Master queued w/err=0: serial=188180 error=0
08:50:32 Received message from Master: op=Filter serial=188181
08:50:32 Color wheel filter change from 0 to 0
08:50:32 FLIGetFilterPos err=0  currentPosition=0
08:50:32 FLIGetStepsRemaining err=0  RemainingSteps=0
08:50:32 Filter is already there-color wheel unchanged
08:50:32 Received message from Master: op=Shutter serial=188182
08:50:32 Shutter LASER open
08:50:32 Received message from Camera: op=State serial=188184
08:50:32 GetSingleValue result=40  Value=cccccccc
08:50:32 SkyScan query
08:50:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:50:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:50:33 Parameters OK
08:50:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:50:33 Set A/D data flow result=40
08:50:33 Set A/D channel type result=40
08:50:33 Set A/D encoding result=40
08:50:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:50:33 Set channel filter=0.000000e+000  result=40
08:50:33 Config A/D  Result=40
08:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:50:33 Get A/D filter: -9.255963e+061  result=40
08:50:33 Get A/D value=-858993460  result=40
08:50:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:50:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:50:33 Parameters OK
08:50:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:50:33 Set A/D data flow result=40
08:50:33 Set A/D channel type result=40
08:50:33 Set A/D encoding result=40
08:50:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:50:33 Set channel filter=0.000000e+000  result=40
08:50:33 Config A/D  Result=40
08:50:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:50:33 Get A/D filter: -9.255963e+061  result=40
08:50:33 Get A/D value=-858993460  result=40
08:50:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:50:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:50:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:50:33 Aux=
08:50:33 Message to Camera, serial 188184 queued
08:50:41 Received message from Master: op=Shutter serial=188194
08:50:41 Shutter LASER close
08:50:42 Received message from Master: op=PointingHead serial=188198
08:50:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:50:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:50:42 Point started: ret=0
08:50:42 point_skyscan result=0
08:50:43 Check angles
08:50:43 SkyScan query
08:50:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.995<-21533  Statuses=0008 0009
08:50:43 Msec=0  True Az=112.995  Ze=-142.995  Az status=0008  Ze status=0009
08:50:43 Check angles
08:50:43 SkyScan query
08:50:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.025<-20135  Statuses=0008 0009
08:50:44 Msec=750  True Az=112.995  Ze=-122.025  Az status=0008  Ze status=0009
08:50:44 Check angles
08:50:44 SkyScan query
08:50:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.085<-18739  Statuses=0008 0009
08:50:45 Msec=1500  True Az=112.995  Ze=-101.085  Az status=0008  Ze status=0009
08:50:45 Check angles
08:50:45 SkyScan query
08:50:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.145<-17343  Statuses=0008 0009
08:50:46 Msec=2250  True Az=112.995  Ze=-80.145  Az status=0008  Ze status=0009
08:50:46 Check angles
08:50:46 SkyScan query
08:50:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.19<-15946  Statuses=0008 0009
08:50:46 Msec=3000  True Az=112.995  Ze=-59.19  Az status=0008  Ze status=0009
08:50:46 Check angles
08:50:46 SkyScan query
08:50:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.205<-14547  Statuses=0008 0009
08:50:47 Msec=3750  True Az=112.995  Ze=-38.205  Az status=0008  Ze status=0009
08:50:47 Check angles
08:50:47 SkyScan query
08:50:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.28<-13152  Statuses=0008 0009
08:50:48 Msec=4500  True Az=112.995  Ze=-17.28  Az status=0008  Ze status=0009
08:50:48 Check angles
08:50:48 SkyScan query
08:50:49 SkyScan query done: ret=0  az=112.995<-7533  ze=3.69<-11754  Statuses=0008 0009
08:50:49 Msec=5250  True Az=112.995  Ze=3.69  Az status=0008  Ze status=0009
08:50:49 Check angles
08:50:49 SkyScan query
08:50:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:50:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:50:49 Message to Master queued w/err=0: serial=188198 error=0
08:50:54 Received message from Master: op=Filter serial=188199
08:50:54 Color wheel filter change from 0 to 0
08:50:54 FLIGetFilterPos err=0  currentPosition=0
08:50:54 FLIGetStepsRemaining err=0  RemainingSteps=0
08:50:54 Filter is already there-color wheel unchanged
08:50:54 Received message from Master: op=Shutter serial=188200
08:50:54 Shutter LASER close
08:50:55 Received message from Camera: op=State serial=188202
08:50:55 GetSingleValue result=40  Value=cccccccc
08:50:55 SkyScan query
08:50:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:50:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:50:55 Parameters OK
08:50:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:50:55 Set A/D data flow result=40
08:50:55 Set A/D channel type result=40
08:50:55 Set A/D encoding result=40
08:50:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:50:55 Set channel filter=0.000000e+000  result=40
08:50:55 Config A/D  Result=40
08:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:50:55 Get A/D filter: -9.255963e+061  result=40
08:50:55 Get A/D value=-858993460  result=40
08:50:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:50:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:50:55 Parameters OK
08:50:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:50:55 Set A/D data flow result=40
08:50:55 Set A/D channel type result=40
08:50:55 Set A/D encoding result=40
08:50:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:50:55 Set channel filter=0.000000e+000  result=40
08:50:55 Config A/D  Result=40
08:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:50:55 Get A/D filter: -9.255963e+061  result=40
08:50:55 Get A/D value=-858993460  result=40
08:50:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:50:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:50:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:50:55 Aux=
08:50:55 Message to Camera, serial 188202 queued
08:51:31 Received message from Master: op=PointingHead serial=188214
08:51:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:51:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:51:31 Point started: ret=0
08:51:31 point_skyscan result=0
08:51:32 Check angles
08:51:32 SkyScan query
08:51:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:51:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:51:33 Message to Master queued w/err=0: serial=188214 error=0
08:51:38 Received message from Master: op=Filter serial=188215
08:51:38 Color wheel filter change from 0 to 0
08:51:38 FLIGetFilterPos err=0  currentPosition=0
08:51:38 FLIGetStepsRemaining err=0  RemainingSteps=0
08:51:38 Filter is already there-color wheel unchanged
08:51:38 Received message from Master: op=Shutter serial=188216
08:51:38 Shutter LASER close
08:51:38 Received message from Camera: op=State serial=188218
08:51:38 GetSingleValue result=40  Value=cccccccc
08:51:38 SkyScan query
08:51:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:51:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:51:39 Parameters OK
08:51:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:51:39 Set A/D data flow result=40
08:51:39 Set A/D channel type result=40
08:51:39 Set A/D encoding result=40
08:51:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:51:39 Set channel filter=0.000000e+000  result=40
08:51:39 Config A/D  Result=40
08:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:51:39 Get A/D filter: -9.255963e+061  result=40
08:51:39 Get A/D value=-858993460  result=40
08:51:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:51:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:51:39 Parameters OK
08:51:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:51:39 Set A/D data flow result=40
08:51:39 Set A/D channel type result=40
08:51:39 Set A/D encoding result=40
08:51:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:51:39 Set channel filter=0.000000e+000  result=40
08:51:39 Config A/D  Result=40
08:51:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:51:39 Get A/D filter: -9.255963e+061  result=40
08:51:39 Get A/D value=-858993460  result=40
08:51:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:51:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:51:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:51:39 Aux=
08:51:39 Message to Camera, serial 188218 queued
08:52:15 Received message from Master: op=PointingHead serial=188231
08:52:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:52:15 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:52:16 Point started: ret=0
08:52:16 point_skyscan result=0
08:52:17 Check angles
08:52:17 SkyScan query
08:52:17 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
08:52:17 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
08:52:17 Check angles
08:52:17 SkyScan query
08:52:18 SkyScan query done: ret=0  az=154.125<-10275  ze=-6.495<-12433  Statuses=0009 0008
08:52:18 Msec=750  True Az=154.125  Ze=-6.495  Az status=0009  Ze status=0008
08:52:18 Check angles
08:52:18 SkyScan query
08:52:19 SkyScan query done: ret=0  az=171.555<-11437  ze=-6.495<-12433  Statuses=0009 0008
08:52:19 Msec=1500  True Az=171.555  Ze=-6.495  Az status=0009  Ze status=0008
08:52:19 Check angles
08:52:19 SkyScan query
08:52:19 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:52:19 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:52:19 Message to Master queued w/err=0: serial=188231 error=0
08:52:24 Received message from Master: op=Filter serial=188232
08:52:24 Color wheel filter change from 0 to 0
08:52:24 FLIGetFilterPos err=0  currentPosition=0
08:52:24 FLIGetStepsRemaining err=0  RemainingSteps=0
08:52:24 Filter is already there-color wheel unchanged
08:52:25 Received message from Master: op=Shutter serial=188233
08:52:25 Shutter LASER close
08:52:25 Received message from Camera: op=State serial=188235
08:52:25 GetSingleValue result=40  Value=cccccccc
08:52:25 SkyScan query
08:52:25 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:52:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:52:25 Parameters OK
08:52:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:52:25 Set A/D data flow result=40
08:52:25 Set A/D channel type result=40
08:52:25 Set A/D encoding result=40
08:52:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:52:25 Set channel filter=0.000000e+000  result=40
08:52:25 Config A/D  Result=40
08:52:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:52:25 Get A/D filter: -9.255963e+061  result=40
08:52:25 Get A/D value=-858993460  result=40
08:52:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:52:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:52:25 Parameters OK
08:52:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:52:25 Set A/D data flow result=40
08:52:25 Set A/D channel type result=40
08:52:25 Set A/D encoding result=40
08:52:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:52:25 Set channel filter=0.000000e+000  result=40
08:52:25 Config A/D  Result=40
08:52:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:52:25 Get A/D filter: -9.255963e+061  result=40
08:52:25 Get A/D value=-858993460  result=40
08:52:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:52:25 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:52:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:52:25 Aux=
08:52:25 Message to Camera, serial 188235 queued
08:53:02 Received message from Master: op=PointingHead serial=188248
08:53:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:53:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:53:02 Point started: ret=0
08:53:02 point_skyscan result=0
08:53:03 Check angles
08:53:03 SkyScan query
08:53:04 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
08:53:04 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
08:53:04 Check angles
08:53:04 SkyScan query
08:53:04 SkyScan query done: ret=0  az=135.705<-9047  ze=6.495<-11567  Statuses=0009 0008
08:53:04 Msec=750  True Az=135.705  Ze=6.495  Az status=0009  Ze status=0008
08:53:05 Check angles
08:53:05 SkyScan query
08:53:05 SkyScan query done: ret=0  az=117.795<-7853  ze=6.495<-11567  Statuses=0009 0008
08:53:05 Msec=1500  True Az=117.795  Ze=6.495  Az status=0009  Ze status=0008
08:53:05 Check angles
08:53:05 SkyScan query
08:53:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:53:06 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:53:06 Message to Master queued w/err=0: serial=188248 error=0
08:53:11 Received message from Master: op=Filter serial=188249
08:53:11 Color wheel filter change from 0 to 0
08:53:11 FLIGetFilterPos err=0  currentPosition=0
08:53:11 FLIGetStepsRemaining err=0  RemainingSteps=0
08:53:11 Filter is already there-color wheel unchanged
08:53:11 Received message from Master: op=Shutter serial=188250
08:53:11 Shutter LASER close
08:53:11 Received message from Camera: op=State serial=188252
08:53:11 GetSingleValue result=40  Value=cccccccc
08:53:11 SkyScan query
08:53:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:53:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:53:12 Parameters OK
08:53:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:53:12 Set A/D data flow result=40
08:53:12 Set A/D channel type result=40
08:53:12 Set A/D encoding result=40
08:53:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:53:12 Set channel filter=0.000000e+000  result=40
08:53:12 Config A/D  Result=40
08:53:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:53:12 Get A/D filter: -9.255963e+061  result=40
08:53:12 Get A/D value=-858993460  result=40
08:53:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:53:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:53:12 Parameters OK
08:53:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:53:12 Set A/D data flow result=40
08:53:12 Set A/D channel type result=40
08:53:12 Set A/D encoding result=40
08:53:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:53:12 Set channel filter=0.000000e+000  result=40
08:53:12 Config A/D  Result=40
08:53:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:53:12 Get A/D filter: -9.255963e+061  result=40
08:53:12 Get A/D value=-858993460  result=40
08:53:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:53:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:53:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:53:12 Aux=
08:53:12 Message to Camera, serial 188252 queued
08:53:49 Received message from Master: op=PointingHead serial=188265
08:53:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:53:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:53:49 Point started: ret=0
08:53:49 point_skyscan result=0
08:53:50 Check angles
08:53:50 SkyScan query
08:53:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.64<-13576  Statuses=0008 0009
08:53:50 Msec=0  True Az=112.995  Ze=-23.64  Az status=0008  Ze status=0009
08:53:50 Check angles
08:53:50 SkyScan query
08:53:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.045<-15003  Statuses=0008 0009
08:53:51 Msec=750  True Az=112.995  Ze=-45.045  Az status=0008  Ze status=0009
08:53:51 Check angles
08:53:51 SkyScan query
08:53:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.985<-16399  Statuses=0008 0009
08:53:52 Msec=1500  True Az=112.995  Ze=-65.985  Az status=0008  Ze status=0009
08:53:52 Check angles
08:53:52 SkyScan query
08:53:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.925<-17795  Statuses=0008 0009
08:53:52 Msec=2250  True Az=112.995  Ze=-86.925  Az status=0008  Ze status=0009
08:53:53 Check angles
08:53:53 SkyScan query
08:53:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.88<-19192  Statuses=0008 0009
08:53:53 Msec=3000  True Az=112.995  Ze=-107.88  Az status=0008  Ze status=0009
08:53:53 Check angles
08:53:53 SkyScan query
08:53:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.835<-20589  Statuses=0008 0009
08:53:54 Msec=3750  True Az=112.995  Ze=-128.835  Az status=0008  Ze status=0009
08:53:54 Check angles
08:53:54 SkyScan query
08:53:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.225<-22015  Statuses=0008 0009
08:53:55 Msec=4500  True Az=112.995  Ze=-150.225  Az status=0008  Ze status=0009
08:53:55 Check angles
08:53:55 SkyScan query
08:53:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.045<-23403  Statuses=0008 0009
08:53:55 Msec=5250  True Az=112.995  Ze=-171.045  Az status=0008  Ze status=0009
08:53:56 Check angles
08:53:56 SkyScan query
08:53:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:53:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:53:56 Message to Master queued w/err=0: serial=188265 error=0
08:54:01 Received message from Master: op=Filter serial=188266
08:54:01 Color wheel filter change from 0 to 0
08:54:01 FLIGetFilterPos err=0  currentPosition=0
08:54:01 FLIGetStepsRemaining err=0  RemainingSteps=0
08:54:01 Filter is already there-color wheel unchanged
08:54:01 Received message from Master: op=Shutter serial=188267
08:54:01 Shutter LASER open
08:54:02 Received message from Camera: op=State serial=188269
08:54:02 GetSingleValue result=40  Value=cccccccc
08:54:02 SkyScan query
08:54:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:54:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:02 Parameters OK
08:54:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:02 Set A/D data flow result=40
08:54:02 Set A/D channel type result=40
08:54:02 Set A/D encoding result=40
08:54:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:02 Set channel filter=0.000000e+000  result=40
08:54:02 Config A/D  Result=40
08:54:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:02 Get A/D filter: -9.255963e+061  result=40
08:54:02 Get A/D value=-858993460  result=40
08:54:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:02 Parameters OK
08:54:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:02 Set A/D data flow result=40
08:54:02 Set A/D channel type result=40
08:54:02 Set A/D encoding result=40
08:54:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:02 Set channel filter=0.000000e+000  result=40
08:54:02 Config A/D  Result=40
08:54:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:02 Get A/D filter: -9.255963e+061  result=40
08:54:02 Get A/D value=-858993460  result=40
08:54:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:54:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:54:02 Aux=
08:54:02 Message to Camera, serial 188269 queued
08:54:11 Received message from Master: op=Shutter serial=188279
08:54:11 Shutter LASER close
08:54:11 Received message from Master: op=PointingHead serial=188283
08:54:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:54:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:54:11 Point started: ret=0
08:54:11 point_skyscan result=0
[UTC 2019-3-9  08:54:12]
08:54:12 Check angles
08:54:12 SkyScan query
08:54:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-141.015<-21401  Statuses=0008 0009
08:54:13 Msec=0  True Az=112.995  Ze=-141.015  Az status=0008  Ze status=0009
08:54:13 Check angles
08:54:13 SkyScan query
08:54:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.815<-20121  Statuses=0008 0009
08:54:13 Msec=750  True Az=112.995  Ze=-121.815  Az status=0008  Ze status=0009
08:54:14 Check angles
08:54:14 SkyScan query
08:54:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.875<-18725  Statuses=0008 0009
08:54:14 Msec=1500  True Az=112.995  Ze=-100.875  Az status=0008  Ze status=0009
08:54:14 Check angles
08:54:14 SkyScan query
08:54:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.935<-17329  Statuses=0008 0009
08:54:15 Msec=2250  True Az=112.995  Ze=-79.935  Az status=0008  Ze status=0009
08:54:15 Check angles
08:54:15 SkyScan query
08:54:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
08:54:16 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
08:54:16 Check angles
08:54:16 SkyScan query
08:54:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
08:54:16 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
08:54:17 Check angles
08:54:17 SkyScan query
08:54:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.605<-13107  Statuses=0008 0009
08:54:17 Msec=4500  True Az=112.995  Ze=-16.605  Az status=0008  Ze status=0009
08:54:17 Check angles
08:54:17 SkyScan query
08:54:18 SkyScan query done: ret=0  az=112.995<-7533  ze=4.29<-11714  Statuses=0008 0009
08:54:18 Msec=5250  True Az=112.995  Ze=4.29  Az status=0008  Ze status=0009
08:54:18 Check angles
08:54:18 SkyScan query
08:54:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:54:19 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:54:19 Message to Master queued w/err=0: serial=188283 error=0
08:54:24 Received message from Master: op=Filter serial=188284
08:54:24 Color wheel filter change from 0 to 0
08:54:24 FLIGetFilterPos err=0  currentPosition=0
08:54:24 FLIGetStepsRemaining err=0  RemainingSteps=0
08:54:24 Filter is already there-color wheel unchanged
08:54:24 Received message from Master: op=Shutter serial=188285
08:54:24 Shutter LASER close
08:54:24 Received message from Camera: op=State serial=188287
08:54:24 GetSingleValue result=40  Value=cccccccc
08:54:24 SkyScan query
08:54:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:54:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:25 Parameters OK
08:54:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:25 Set A/D data flow result=40
08:54:25 Set A/D channel type result=40
08:54:25 Set A/D encoding result=40
08:54:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:25 Set channel filter=0.000000e+000  result=40
08:54:25 Config A/D  Result=40
08:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:25 Get A/D filter: -9.255963e+061  result=40
08:54:25 Get A/D value=-858993460  result=40
08:54:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:54:25 Parameters OK
08:54:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:54:25 Set A/D data flow result=40
08:54:25 Set A/D channel type result=40
08:54:25 Set A/D encoding result=40
08:54:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:54:25 Set channel filter=0.000000e+000  result=40
08:54:25 Config A/D  Result=40
08:54:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:54:25 Get A/D filter: -9.255963e+061  result=40
08:54:25 Get A/D value=-858993460  result=40
08:54:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:54:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:54:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:54:25 Aux=
08:54:25 Message to Camera, serial 188287 queued
08:55:01 Received message from Master: op=PointingHead serial=188299
08:55:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:55:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:55:01 Point started: ret=0
08:55:01 point_skyscan result=0
08:55:02 Check angles
08:55:02 SkyScan query
08:55:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:55:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:55:02 Message to Master queued w/err=0: serial=188299 error=0
08:55:07 Received message from Master: op=Filter serial=188300
08:55:07 Color wheel filter change from 0 to 0
08:55:07 FLIGetFilterPos err=0  currentPosition=0
08:55:07 FLIGetStepsRemaining err=0  RemainingSteps=0
08:55:07 Filter is already there-color wheel unchanged
08:55:07 Received message from Master: op=Shutter serial=188301
08:55:07 Shutter LASER close
08:55:07 Received message from Camera: op=State serial=188303
08:55:07 GetSingleValue result=40  Value=cccccccc
08:55:07 SkyScan query
08:55:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:55:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:55:08 Parameters OK
08:55:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:55:08 Set A/D data flow result=40
08:55:08 Set A/D channel type result=40
08:55:08 Set A/D encoding result=40
08:55:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:55:08 Set channel filter=0.000000e+000  result=40
08:55:08 Config A/D  Result=40
08:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:55:08 Get A/D filter: -9.255963e+061  result=40
08:55:08 Get A/D value=-858993460  result=40
08:55:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:55:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:55:08 Parameters OK
08:55:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:55:08 Set A/D data flow result=40
08:55:08 Set A/D channel type result=40
08:55:08 Set A/D encoding result=40
08:55:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:55:08 Set channel filter=0.000000e+000  result=40
08:55:08 Config A/D  Result=40
08:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:55:08 Get A/D filter: -9.255963e+061  result=40
08:55:08 Get A/D value=-858993460  result=40
08:55:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:55:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:55:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:55:08 Aux=
08:55:08 Message to Camera, serial 188303 queued
08:55:45 Received message from Master: op=PointingHead serial=188316
08:55:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:55:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:55:45 Point started: ret=0
08:55:45 point_skyscan result=0
08:55:46 Check angles
08:55:46 SkyScan query
08:55:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:55:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:55:47 Message to Master queued w/err=0: serial=188316 error=0
08:55:52 Received message from Master: op=Filter serial=188317
08:55:52 Color wheel filter change from 0 to 0
08:55:52 FLIGetFilterPos err=0  currentPosition=0
08:55:52 FLIGetStepsRemaining err=0  RemainingSteps=0
08:55:52 Filter is already there-color wheel unchanged
08:55:52 Received message from Master: op=Shutter serial=188318
08:55:52 Shutter LASER close
08:55:52 Received message from Camera: op=State serial=188320
08:55:52 GetSingleValue result=40  Value=cccccccc
08:55:52 SkyScan query
08:55:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:55:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:55:52 Parameters OK
08:55:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:55:52 Set A/D data flow result=40
08:55:52 Set A/D channel type result=40
08:55:52 Set A/D encoding result=40
08:55:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:55:52 Set channel filter=0.000000e+000  result=40
08:55:52 Config A/D  Result=40
08:55:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:55:52 Get A/D filter: -9.255963e+061  result=40
08:55:52 Get A/D value=-858993460  result=40
08:55:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:55:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:55:52 Parameters OK
08:55:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:55:52 Set A/D data flow result=40
08:55:52 Set A/D channel type result=40
08:55:52 Set A/D encoding result=40
08:55:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:55:52 Set channel filter=0.000000e+000  result=40
08:55:52 Config A/D  Result=40
08:55:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:55:52 Get A/D filter: -9.255963e+061  result=40
08:55:52 Get A/D value=-858993460  result=40
08:55:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:55:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:55:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:55:52 Aux=
08:55:52 Message to Camera, serial 188320 queued
08:56:29 Received message from Master: op=PointingHead serial=188333
08:56:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:56:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:56:30 Point started: ret=0
08:56:30 point_skyscan result=0
08:56:30 Check angles
08:56:30 SkyScan query
08:56:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:56:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:56:31 Message to Master queued w/err=0: serial=188333 error=0
08:56:36 Received message from Master: op=Filter serial=188334
08:56:36 Color wheel filter change from 0 to 0
08:56:36 FLIGetFilterPos err=0  currentPosition=0
08:56:36 FLIGetStepsRemaining err=0  RemainingSteps=0
08:56:36 Filter is already there-color wheel unchanged
08:56:36 Received message from Master: op=Shutter serial=188335
08:56:36 Shutter LASER close
08:56:36 Received message from Camera: op=State serial=188337
08:56:36 GetSingleValue result=40  Value=cccccccc
08:56:36 SkyScan query
08:56:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:56:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:56:37 Parameters OK
08:56:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:56:37 Set A/D data flow result=40
08:56:37 Set A/D channel type result=40
08:56:37 Set A/D encoding result=40
08:56:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:56:37 Set channel filter=0.000000e+000  result=40
08:56:37 Config A/D  Result=40
08:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:56:37 Get A/D filter: -9.255963e+061  result=40
08:56:37 Get A/D value=-858993460  result=40
08:56:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:56:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:56:37 Parameters OK
08:56:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:56:37 Set A/D data flow result=40
08:56:37 Set A/D channel type result=40
08:56:37 Set A/D encoding result=40
08:56:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:56:37 Set channel filter=0.000000e+000  result=40
08:56:37 Config A/D  Result=40
08:56:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:56:37 Get A/D filter: -9.255963e+061  result=40
08:56:37 Get A/D value=-858993460  result=40
08:56:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:56:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:56:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:56:37 Aux=
08:56:37 Message to Camera, serial 188337 queued
08:57:13 Received message from Master: op=PointingHead serial=188350
08:57:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
08:57:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
08:57:14 Point started: ret=0
08:57:14 point_skyscan result=0
08:57:15 Check angles
08:57:15 SkyScan query
08:57:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
08:57:15 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
08:57:15 Check angles
08:57:15 SkyScan query
08:57:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.255<-15017  Statuses=0008 0009
08:57:16 Msec=750  True Az=112.995  Ze=-45.255  Az status=0008  Ze status=0009
08:57:16 Check angles
08:57:16 SkyScan query
08:57:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.15<-16410  Statuses=0008 0009
08:57:17 Msec=1500  True Az=112.995  Ze=-66.15  Az status=0008  Ze status=0009
08:57:17 Check angles
08:57:17 SkyScan query
08:57:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.09<-17806  Statuses=0008 0009
08:57:17 Msec=2250  True Az=112.995  Ze=-87.09  Az status=0008  Ze status=0009
08:57:18 Check angles
08:57:18 SkyScan query
08:57:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.045<-19203  Statuses=0008 0009
08:57:18 Msec=3000  True Az=112.995  Ze=-108.045  Az status=0008  Ze status=0009
08:57:18 Check angles
08:57:18 SkyScan query
08:57:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.985<-20599  Statuses=0008 0009
08:57:19 Msec=3750  True Az=112.995  Ze=-128.985  Az status=0008  Ze status=0009
08:57:19 Check angles
08:57:19 SkyScan query
08:57:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.94<-21996  Statuses=0008 0009
08:57:20 Msec=4500  True Az=112.995  Ze=-149.94  Az status=0008  Ze status=0009
08:57:20 Check angles
08:57:20 SkyScan query
08:57:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.82<-23388  Statuses=0008 0009
08:57:20 Msec=5250  True Az=112.995  Ze=-170.82  Az status=0008  Ze status=0009
08:57:21 Check angles
08:57:21 SkyScan query
08:57:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
08:57:21 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
08:57:21 Message to Master queued w/err=0: serial=188350 error=0
08:57:26 Received message from Master: op=Filter serial=188351
08:57:26 Color wheel filter change from 0 to 0
08:57:26 FLIGetFilterPos err=0  currentPosition=0
08:57:26 FLIGetStepsRemaining err=0  RemainingSteps=0
08:57:26 Filter is already there-color wheel unchanged
08:57:26 Received message from Master: op=Shutter serial=188352
08:57:26 Shutter LASER open
08:57:26 Received message from Camera: op=State serial=188354
08:57:26 GetSingleValue result=40  Value=cccccccc
08:57:26 SkyScan query
08:57:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
08:57:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:27 Parameters OK
08:57:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:27 Set A/D data flow result=40
08:57:27 Set A/D channel type result=40
08:57:27 Set A/D encoding result=40
08:57:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:27 Set channel filter=0.000000e+000  result=40
08:57:27 Config A/D  Result=40
08:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:27 Get A/D filter: -9.255963e+061  result=40
08:57:27 Get A/D value=-858993460  result=40
08:57:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:27 Parameters OK
08:57:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:27 Set A/D data flow result=40
08:57:27 Set A/D channel type result=40
08:57:27 Set A/D encoding result=40
08:57:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:27 Set channel filter=0.000000e+000  result=40
08:57:27 Config A/D  Result=40
08:57:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:27 Get A/D filter: -9.255963e+061  result=40
08:57:27 Get A/D value=-858993460  result=40
08:57:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:57:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:57:27 Aux=
08:57:27 Message to Camera, serial 188354 queued
08:57:35 Received message from Master: op=Shutter serial=188364
08:57:36 Shutter LASER close
08:57:36 Received message from Master: op=PointingHead serial=188368
08:57:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:57:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:57:36 Point started: ret=0
08:57:36 point_skyscan result=0
08:57:37 Check angles
08:57:37 SkyScan query
08:57:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
08:57:38 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
08:57:38 Check angles
08:57:38 SkyScan query
08:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
08:57:39 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
08:57:39 Check angles
08:57:39 SkyScan query
08:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.265<-18751  Statuses=0008 0009
08:57:39 Msec=1500  True Az=112.995  Ze=-101.265  Az status=0008  Ze status=0009
08:57:39 Check angles
08:57:39 SkyScan query
08:57:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
08:57:40 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
08:57:40 Check angles
08:57:40 SkyScan query
08:57:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
08:57:41 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
08:57:41 Check angles
08:57:41 SkyScan query
08:57:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
08:57:42 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
08:57:42 Check angles
08:57:42 SkyScan query
08:57:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.445<-13163  Statuses=0008 0009
08:57:42 Msec=4500  True Az=112.995  Ze=-17.445  Az status=0008  Ze status=0009
08:57:42 Check angles
08:57:42 SkyScan query
08:57:43 SkyScan query done: ret=0  az=112.995<-7533  ze=3.51<-11766  Statuses=0008 0009
08:57:43 Msec=5250  True Az=112.995  Ze=3.51  Az status=0008  Ze status=0009
08:57:43 Check angles
08:57:43 SkyScan query
08:57:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
08:57:44 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
08:57:44 Message to Master queued w/err=0: serial=188368 error=0
08:57:49 Received message from Master: op=Filter serial=188369
08:57:49 Color wheel filter change from 0 to 0
08:57:49 FLIGetFilterPos err=0  currentPosition=0
08:57:49 FLIGetStepsRemaining err=0  RemainingSteps=0
08:57:49 Filter is already there-color wheel unchanged
08:57:49 Received message from Master: op=Shutter serial=188370
08:57:49 Shutter LASER close
08:57:49 Received message from Camera: op=State serial=188372
08:57:49 GetSingleValue result=40  Value=cccccccc
08:57:49 SkyScan query
08:57:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:57:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:50 Parameters OK
08:57:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:50 Set A/D data flow result=40
08:57:50 Set A/D channel type result=40
08:57:50 Set A/D encoding result=40
08:57:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:50 Set channel filter=0.000000e+000  result=40
08:57:50 Config A/D  Result=40
08:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:50 Get A/D filter: -9.255963e+061  result=40
08:57:50 Get A/D value=-858993460  result=40
08:57:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:57:50 Parameters OK
08:57:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:57:50 Set A/D data flow result=40
08:57:50 Set A/D channel type result=40
08:57:50 Set A/D encoding result=40
08:57:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:57:50 Set channel filter=0.000000e+000  result=40
08:57:50 Config A/D  Result=40
08:57:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:57:50 Get A/D filter: -9.255963e+061  result=40
08:57:50 Get A/D value=-858993460  result=40
08:57:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:57:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:57:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:57:50 Aux=
08:57:50 Message to Camera, serial 188372 queued
08:58:27 Received message from Master: op=PointingHead serial=188385
08:58:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:58:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:58:27 Point started: ret=0
08:58:27 point_skyscan result=0
08:58:28 Check angles
08:58:28 SkyScan query
08:58:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:58:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
08:58:28 Message to Master queued w/err=0: serial=188385 error=0
08:58:33 Received message from Master: op=Filter serial=188386
08:58:33 Color wheel filter change from 0 to 0
08:58:33 FLIGetFilterPos err=0  currentPosition=0
08:58:33 FLIGetStepsRemaining err=0  RemainingSteps=0
08:58:33 Filter is already there-color wheel unchanged
08:58:33 Received message from Master: op=Shutter serial=188387
08:58:33 Shutter LASER close
08:58:33 Received message from Camera: op=State serial=188389
08:58:33 GetSingleValue result=40  Value=cccccccc
08:58:33 SkyScan query
08:58:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
08:58:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:58:34 Parameters OK
08:58:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:58:34 Set A/D data flow result=40
08:58:34 Set A/D channel type result=40
08:58:34 Set A/D encoding result=40
08:58:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:58:34 Set channel filter=0.000000e+000  result=40
08:58:34 Config A/D  Result=40
08:58:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:58:34 Get A/D filter: -9.255963e+061  result=40
08:58:34 Get A/D value=-858993460  result=40
08:58:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:58:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:58:34 Parameters OK
08:58:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:58:34 Set A/D data flow result=40
08:58:34 Set A/D channel type result=40
08:58:34 Set A/D encoding result=40
08:58:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:58:34 Set channel filter=0.000000e+000  result=40
08:58:34 Config A/D  Result=40
08:58:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:58:34 Get A/D filter: -9.255963e+061  result=40
08:58:34 Get A/D value=-858993460  result=40
08:58:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:58:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:58:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:58:34 Aux=
08:58:34 Message to Camera, serial 188389 queued
08:59:11 Received message from Master: op=PointingHead serial=188402
08:59:11 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
08:59:11 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
08:59:11 Point started: ret=0
08:59:11 point_skyscan result=0
08:59:12 Check angles
08:59:12 SkyScan query
08:59:12 SkyScan query done: ret=0  az=135.69<-9046  ze=-6.51<-12434  Statuses=0009 0008
08:59:12 Msec=0  True Az=135.69  Ze=-6.51  Az status=0009  Ze status=0008
08:59:13 Check angles
08:59:13 SkyScan query
08:59:13 SkyScan query done: ret=0  az=153.21<-10214  ze=-6.495<-12433  Statuses=0009 0008
08:59:13 Msec=750  True Az=153.21  Ze=-6.495  Az status=0009  Ze status=0008
08:59:13 Check angles
08:59:13 SkyScan query
08:59:14 SkyScan query done: ret=0  az=170.745<-11383  ze=-6.495<-12433  Statuses=0009 0008
08:59:14 Msec=1500  True Az=170.745  Ze=-6.495  Az status=0009  Ze status=0008
08:59:14 Check angles
08:59:14 SkyScan query
08:59:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:59:15 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
08:59:15 Message to Master queued w/err=0: serial=188402 error=0
08:59:20 Received message from Master: op=Filter serial=188403
08:59:20 Color wheel filter change from 0 to 0
08:59:20 FLIGetFilterPos err=0  currentPosition=0
08:59:20 FLIGetStepsRemaining err=0  RemainingSteps=0
08:59:20 Filter is already there-color wheel unchanged
08:59:20 Received message from Master: op=Shutter serial=188404
08:59:20 Shutter LASER close
08:59:20 Received message from Camera: op=State serial=188406
08:59:20 GetSingleValue result=40  Value=cccccccc
08:59:20 SkyScan query
08:59:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
08:59:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:59:21 Parameters OK
08:59:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:59:21 Set A/D data flow result=40
08:59:21 Set A/D channel type result=40
08:59:21 Set A/D encoding result=40
08:59:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:59:21 Set channel filter=0.000000e+000  result=40
08:59:21 Config A/D  Result=40
08:59:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:59:21 Get A/D filter: -9.255963e+061  result=40
08:59:21 Get A/D value=-858993460  result=40
08:59:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:59:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
08:59:21 Parameters OK
08:59:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
08:59:21 Set A/D data flow result=40
08:59:21 Set A/D channel type result=40
08:59:21 Set A/D encoding result=40
08:59:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
08:59:21 Set channel filter=0.000000e+000  result=40
08:59:21 Config A/D  Result=40
08:59:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
08:59:21 Get A/D filter: -9.255963e+061  result=40
08:59:21 Get A/D value=-858993460  result=40
08:59:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
08:59:21 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
08:59:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
08:59:21 Aux=
08:59:21 Message to Camera, serial 188406 queued
08:59:57 Received message from Master: op=PointingHead serial=188419
08:59:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
08:59:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
08:59:58 Point started: ret=0
08:59:58 point_skyscan result=0
08:59:59 Check angles
08:59:59 SkyScan query
08:59:59 SkyScan query done: ret=0  az=152.61<-10174  ze=6.51<-11566  Statuses=0009 0008
08:59:59 Msec=0  True Az=152.61  Ze=6.51  Az status=0009  Ze status=0008
08:59:59 Check angles
08:59:59 SkyScan query
09:00:00 SkyScan query done: ret=0  az=134.925<-8995  ze=6.495<-11567  Statuses=0009 0008
09:00:00 Msec=750  True Az=134.925  Ze=6.495  Az status=0009  Ze status=0008
09:00:00 Check angles
09:00:00 SkyScan query
09:00:01 SkyScan query done: ret=0  az=117.075<-7805  ze=6.495<-11567  Statuses=0009 0008
09:00:01 Msec=1500  True Az=117.075  Ze=6.495  Az status=0009  Ze status=0008
09:00:01 Check angles
09:00:01 SkyScan query
09:00:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:00:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:00:01 Message to Master queued w/err=0: serial=188419 error=0
09:00:06 Received message from Master: op=Filter serial=188420
09:00:06 Color wheel filter change from 0 to 0
09:00:06 FLIGetFilterPos err=0  currentPosition=0
09:00:06 FLIGetStepsRemaining err=0  RemainingSteps=0
09:00:06 Filter is already there-color wheel unchanged
09:00:07 Received message from Master: op=Shutter serial=188421
09:00:07 Shutter LASER close
09:00:07 Received message from Camera: op=State serial=188423
09:00:07 GetSingleValue result=40  Value=cccccccc
09:00:07 SkyScan query
09:00:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:00:07 Parameters OK
09:00:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:00:07 Set A/D data flow result=40
09:00:07 Set A/D channel type result=40
09:00:07 Set A/D encoding result=40
09:00:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:00:07 Set channel filter=0.000000e+000  result=40
09:00:07 Config A/D  Result=40
09:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:00:07 Get A/D filter: -9.255963e+061  result=40
09:00:07 Get A/D value=-858993460  result=40
09:00:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:00:07 Parameters OK
09:00:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:00:07 Set A/D data flow result=40
09:00:07 Set A/D channel type result=40
09:00:07 Set A/D encoding result=40
09:00:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:00:07 Set channel filter=0.000000e+000  result=40
09:00:07 Config A/D  Result=40
09:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:00:07 Get A/D filter: -9.255963e+061  result=40
09:00:07 Get A/D value=-858993460  result=40
09:00:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:00:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:00:07 Aux=
09:00:07 Message to Camera, serial 188423 queued
09:00:44 Received message from Master: op=PointingHead serial=188436
09:00:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:00:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:00:44 Point started: ret=0
09:00:44 point_skyscan result=0
09:00:45 Check angles
09:00:45 SkyScan query
09:00:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
09:00:46 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
09:00:46 Check angles
09:00:46 SkyScan query
09:00:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
09:00:46 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
09:00:47 Check angles
09:00:47 SkyScan query
09:00:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.685<-16379  Statuses=0008 0009
09:00:47 Msec=1500  True Az=112.995  Ze=-65.685  Az status=0008  Ze status=0009
09:00:47 Check angles
09:00:47 SkyScan query
09:00:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.64<-17776  Statuses=0008 0009
09:00:48 Msec=2250  True Az=112.995  Ze=-86.64  Az status=0008  Ze status=0009
09:00:48 Check angles
09:00:48 SkyScan query
09:00:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.015<-19201  Statuses=0008 0009
09:00:49 Msec=3000  True Az=112.995  Ze=-108.015  Az status=0008  Ze status=0009
09:00:49 Check angles
09:00:49 SkyScan query
09:00:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.955<-20597  Statuses=0008 0009
09:00:49 Msec=3750  True Az=112.995  Ze=-128.955  Az status=0008  Ze status=0009
09:00:50 Check angles
09:00:50 SkyScan query
09:00:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.91<-21994  Statuses=0008 0009
09:00:50 Msec=4500  True Az=112.995  Ze=-149.91  Az status=0008  Ze status=0009
09:00:50 Check angles
09:00:50 SkyScan query
09:00:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.15<-23410  Statuses=0008 0009
09:00:51 Msec=5250  True Az=112.995  Ze=-171.15  Az status=0008  Ze status=0009
09:00:51 Check angles
09:00:51 SkyScan query
09:00:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:00:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:00:52 Message to Master queued w/err=0: serial=188436 error=0
09:00:57 Received message from Master: op=Filter serial=188437
09:00:57 Color wheel filter change from 0 to 0
09:00:57 FLIGetFilterPos err=0  currentPosition=0
09:00:57 FLIGetStepsRemaining err=0  RemainingSteps=0
09:00:57 Filter is already there-color wheel unchanged
09:00:57 Received message from Master: op=Shutter serial=188438
09:00:57 Shutter LASER open
09:00:57 Received message from Camera: op=State serial=188440
09:00:57 GetSingleValue result=40  Value=cccccccc
09:00:57 SkyScan query
09:00:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:00:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:00:58 Parameters OK
09:00:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:00:58 Set A/D data flow result=40
09:00:58 Set A/D channel type result=40
09:00:58 Set A/D encoding result=40
09:00:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:00:58 Set channel filter=0.000000e+000  result=40
09:00:58 Config A/D  Result=40
09:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:00:58 Get A/D filter: -9.255963e+061  result=40
09:00:58 Get A/D value=-858993460  result=40
09:00:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:00:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:00:58 Parameters OK
09:00:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:00:58 Set A/D data flow result=40
09:00:58 Set A/D channel type result=40
09:00:58 Set A/D encoding result=40
09:00:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:00:58 Set channel filter=0.000000e+000  result=40
09:00:58 Config A/D  Result=40
09:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:00:58 Get A/D filter: -9.255963e+061  result=40
09:00:58 Get A/D value=-858993460  result=40
09:00:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:00:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:00:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:00:58 Aux=
09:00:58 Message to Camera, serial 188440 queued
09:01:06 Received message from Master: op=Shutter serial=188450
09:01:06 Shutter LASER close
09:01:07 Received message from Master: op=PointingHead serial=188454
09:01:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:01:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:01:07 Point started: ret=0
09:01:07 point_skyscan result=0
09:01:08 Check angles
09:01:08 SkyScan query
09:01:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
09:01:08 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
09:01:08 Check angles
09:01:08 SkyScan query
09:01:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.71<-20114  Statuses=0008 0009
09:01:09 Msec=750  True Az=112.995  Ze=-121.71  Az status=0008  Ze status=0009
09:01:09 Check angles
09:01:09 SkyScan query
09:01:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
09:01:10 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
09:01:10 Check angles
09:01:10 SkyScan query
09:01:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.83<-17322  Statuses=0008 0009
09:01:10 Msec=2250  True Az=112.995  Ze=-79.83  Az status=0008  Ze status=0009
09:01:11 Check angles
09:01:11 SkyScan query
09:01:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.41<-15894  Statuses=0008 0009
09:01:11 Msec=3000  True Az=112.995  Ze=-58.41  Az status=0008  Ze status=0009
09:01:11 Check angles
09:01:11 SkyScan query
09:01:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.485<-14499  Statuses=0008 0009
09:01:12 Msec=3750  True Az=112.995  Ze=-37.485  Az status=0008  Ze status=0009
09:01:12 Check angles
09:01:12 SkyScan query
09:01:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.065<-13071  Statuses=0008 0009
09:01:13 Msec=4500  True Az=112.995  Ze=-16.065  Az status=0008  Ze status=0009
09:01:13 Check angles
09:01:13 SkyScan query
09:01:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.71<-11686  Statuses=0008 0009
09:01:14 Msec=5250  True Az=112.995  Ze=4.71  Az status=0008  Ze status=0009
09:01:14 Check angles
09:01:14 SkyScan query
09:01:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:01:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:01:14 Message to Master queued w/err=0: serial=188454 error=0
09:01:19 Received message from Master: op=Filter serial=188455
09:01:19 Color wheel filter change from 0 to 0
09:01:19 FLIGetFilterPos err=0  currentPosition=0
09:01:19 FLIGetStepsRemaining err=0  RemainingSteps=0
09:01:19 Filter is already there-color wheel unchanged
09:01:19 Received message from Master: op=Shutter serial=188456
09:01:19 Shutter LASER close
09:01:20 Received message from Camera: op=State serial=188458
09:01:20 GetSingleValue result=40  Value=cccccccc
09:01:20 SkyScan query
09:01:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:01:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:01:20 Parameters OK
09:01:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:01:20 Set A/D data flow result=40
09:01:20 Set A/D channel type result=40
09:01:20 Set A/D encoding result=40
09:01:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:01:20 Set channel filter=0.000000e+000  result=40
09:01:20 Config A/D  Result=40
09:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:01:20 Get A/D filter: -9.255963e+061  result=40
09:01:20 Get A/D value=-858993460  result=40
09:01:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:01:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:01:20 Parameters OK
09:01:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:01:20 Set A/D data flow result=40
09:01:20 Set A/D channel type result=40
09:01:20 Set A/D encoding result=40
09:01:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:01:20 Set channel filter=0.000000e+000  result=40
09:01:20 Config A/D  Result=40
09:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:01:20 Get A/D filter: -9.255963e+061  result=40
09:01:20 Get A/D value=-858993460  result=40
09:01:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:01:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:01:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:01:20 Aux=
09:01:20 Message to Camera, serial 188458 queued
09:01:57 Received message from Master: op=PointingHead serial=188471
09:01:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:01:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:01:57 Point started: ret=0
09:01:57 point_skyscan result=0
09:01:58 Check angles
09:01:58 SkyScan query
09:01:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:01:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:01:59 Message to Master queued w/err=0: serial=188471 error=0
09:02:04 Received message from Master: op=Filter serial=188472
09:02:04 Color wheel filter change from 0 to 0
09:02:04 FLIGetFilterPos err=0  currentPosition=0
09:02:04 FLIGetStepsRemaining err=0  RemainingSteps=0
09:02:04 Filter is already there-color wheel unchanged
09:02:04 Received message from Master: op=Shutter serial=188473
09:02:04 Shutter LASER close
09:02:04 Received message from Camera: op=State serial=188475
09:02:04 GetSingleValue result=40  Value=cccccccc
09:02:04 SkyScan query
09:02:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:02:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:02:04 Parameters OK
09:02:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:02:04 Set A/D data flow result=40
09:02:04 Set A/D channel type result=40
09:02:04 Set A/D encoding result=40
09:02:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:02:04 Set channel filter=0.000000e+000  result=40
09:02:04 Config A/D  Result=40
09:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:02:04 Get A/D filter: -9.255963e+061  result=40
09:02:04 Get A/D value=-858993460  result=40
09:02:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:02:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:02:04 Parameters OK
09:02:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:02:04 Set A/D data flow result=40
09:02:04 Set A/D channel type result=40
09:02:04 Set A/D encoding result=40
09:02:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:02:04 Set channel filter=0.000000e+000  result=40
09:02:04 Config A/D  Result=40
09:02:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:02:04 Get A/D filter: -9.255963e+061  result=40
09:02:04 Get A/D value=-858993460  result=40
09:02:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:02:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:02:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:02:04 Aux=
09:02:04 Message to Camera, serial 188475 queued
09:02:41 Received message from Master: op=PointingHead serial=188488
09:02:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:02:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:02:42 Point started: ret=0
09:02:42 point_skyscan result=0
09:02:42 Check angles
09:02:42 SkyScan query
09:02:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:02:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:02:43 Message to Master queued w/err=0: serial=188488 error=0
09:02:48 Received message from Master: op=Filter serial=188489
09:02:48 Color wheel filter change from 0 to 0
09:02:48 FLIGetFilterPos err=0  currentPosition=0
09:02:48 FLIGetStepsRemaining err=0  RemainingSteps=0
09:02:48 Filter is already there-color wheel unchanged
09:02:48 Received message from Master: op=Shutter serial=188490
09:02:48 Shutter LASER close
09:02:48 Received message from Camera: op=State serial=188492
09:02:48 GetSingleValue result=40  Value=cccccccc
09:02:48 SkyScan query
09:02:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:02:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:02:49 Parameters OK
09:02:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:02:49 Set A/D data flow result=40
09:02:49 Set A/D channel type result=40
09:02:49 Set A/D encoding result=40
09:02:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:02:49 Set channel filter=0.000000e+000  result=40
09:02:49 Config A/D  Result=40
09:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:02:49 Get A/D filter: -9.255963e+061  result=40
09:02:49 Get A/D value=-858993460  result=40
09:02:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:02:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:02:49 Parameters OK
09:02:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:02:49 Set A/D data flow result=40
09:02:49 Set A/D channel type result=40
09:02:49 Set A/D encoding result=40
09:02:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:02:49 Set channel filter=0.000000e+000  result=40
09:02:49 Config A/D  Result=40
09:02:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:02:49 Get A/D filter: -9.255963e+061  result=40
09:02:49 Get A/D value=-858993460  result=40
09:02:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:02:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:02:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:02:49 Aux=
09:02:49 Message to Camera, serial 188492 queued
09:03:26 Received message from Master: op=PointingHead serial=188505
09:03:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:03:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:03:26 Point started: ret=0
09:03:26 point_skyscan result=0
09:03:27 Check angles
09:03:27 SkyScan query
09:03:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:03:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:03:27 Message to Master queued w/err=0: serial=188505 error=0
09:03:32 Received message from Master: op=Filter serial=188506
09:03:32 Color wheel filter change from 0 to 0
09:03:32 FLIGetFilterPos err=0  currentPosition=0
09:03:32 FLIGetStepsRemaining err=0  RemainingSteps=0
09:03:32 Filter is already there-color wheel unchanged
09:03:32 Received message from Master: op=Shutter serial=188507
09:03:32 Shutter LASER close
09:03:33 Received message from Camera: op=State serial=188509
09:03:33 GetSingleValue result=40  Value=cccccccc
09:03:33 SkyScan query
09:03:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:03:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:03:33 Parameters OK
09:03:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:03:33 Set A/D data flow result=40
09:03:33 Set A/D channel type result=40
09:03:33 Set A/D encoding result=40
09:03:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:03:33 Set channel filter=0.000000e+000  result=40
09:03:33 Config A/D  Result=40
09:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:03:33 Get A/D filter: -9.255963e+061  result=40
09:03:33 Get A/D value=-858993460  result=40
09:03:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:03:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:03:33 Parameters OK
09:03:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:03:33 Set A/D data flow result=40
09:03:33 Set A/D channel type result=40
09:03:33 Set A/D encoding result=40
09:03:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:03:33 Set channel filter=0.000000e+000  result=40
09:03:33 Config A/D  Result=40
09:03:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:03:33 Get A/D filter: -9.255963e+061  result=40
09:03:33 Get A/D value=-858993460  result=40
09:03:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:03:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:03:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:03:33 Aux=
09:03:33 Message to Camera, serial 188509 queued
09:03:36 Received message from Master: op=Identify serial=188510
[UTC 2019-3-9  09:03:48]
09:04:10 Received message from Master: op=PointingHead serial=188525
09:04:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:04:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:04:10 Point started: ret=0
09:04:10 point_skyscan result=0
09:04:11 Check angles
09:04:11 SkyScan query
09:04:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
09:04:12 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
09:04:12 Check angles
09:04:12 SkyScan query
09:04:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.37<-14958  Statuses=0008 0009
09:04:12 Msec=750  True Az=112.995  Ze=-44.37  Az status=0008  Ze status=0009
09:04:13 Check angles
09:04:13 SkyScan query
09:04:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
09:04:13 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
09:04:13 Check angles
09:04:13 SkyScan query
09:04:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.295<-17753  Statuses=0008 0009
09:04:14 Msec=2250  True Az=112.995  Ze=-86.295  Az status=0008  Ze status=0009
09:04:14 Check angles
09:04:14 SkyScan query
09:04:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.22<-19148  Statuses=0008 0009
09:04:15 Msec=3000  True Az=112.995  Ze=-107.22  Az status=0008  Ze status=0009
09:04:15 Check angles
09:04:15 SkyScan query
09:04:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.19<-20546  Statuses=0008 0009
09:04:15 Msec=3750  True Az=112.995  Ze=-128.19  Az status=0008  Ze status=0009
09:04:16 Check angles
09:04:16 SkyScan query
09:04:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.16<-21944  Statuses=0008 0009
09:04:16 Msec=4500  True Az=112.995  Ze=-149.16  Az status=0008  Ze status=0009
09:04:16 Check angles
09:04:16 SkyScan query
09:04:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.085<-23339  Statuses=0008 0009
09:04:17 Msec=5250  True Az=112.995  Ze=-170.085  Az status=0008  Ze status=0009
09:04:17 Check angles
09:04:17 SkyScan query
09:04:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:04:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:04:18 Message to Master queued w/err=0: serial=188525 error=0
09:04:23 Received message from Master: op=Filter serial=188526
09:04:23 Color wheel filter change from 0 to 0
09:04:23 FLIGetFilterPos err=0  currentPosition=0
09:04:23 FLIGetStepsRemaining err=0  RemainingSteps=0
09:04:23 Filter is already there-color wheel unchanged
09:04:23 Received message from Master: op=Shutter serial=188527
09:04:23 Shutter LASER open
09:04:23 Received message from Camera: op=State serial=188529
09:04:23 GetSingleValue result=40  Value=cccccccc
09:04:23 SkyScan query
09:04:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:04:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:24 Parameters OK
09:04:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:24 Set A/D data flow result=40
09:04:24 Set A/D channel type result=40
09:04:24 Set A/D encoding result=40
09:04:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:24 Set channel filter=0.000000e+000  result=40
09:04:24 Config A/D  Result=40
09:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:24 Get A/D filter: -9.255963e+061  result=40
09:04:24 Get A/D value=-858993460  result=40
09:04:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:24 Parameters OK
09:04:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:24 Set A/D data flow result=40
09:04:24 Set A/D channel type result=40
09:04:24 Set A/D encoding result=40
09:04:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:24 Set channel filter=0.000000e+000  result=40
09:04:24 Config A/D  Result=40
09:04:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:24 Get A/D filter: -9.255963e+061  result=40
09:04:24 Get A/D value=-858993460  result=40
09:04:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:04:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:04:24 Aux=
09:04:24 Message to Camera, serial 188529 queued
09:04:32 Received message from Master: op=Shutter serial=188539
09:04:32 Shutter LASER close
09:04:33 Received message from Master: op=PointingHead serial=188543
09:04:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:04:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:04:33 Point started: ret=0
09:04:33 point_skyscan result=0
09:04:34 Check angles
09:04:34 SkyScan query
09:04:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.34<-21556  Statuses=0008 0009
09:04:34 Msec=0  True Az=112.995  Ze=-143.34  Az status=0008  Ze status=0009
09:04:35 Check angles
09:04:35 SkyScan query
09:04:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
09:04:35 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
09:04:35 Check angles
09:04:35 SkyScan query
09:04:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.53<-18702  Statuses=0008 0009
09:04:36 Msec=1500  True Az=112.995  Ze=-100.53  Az status=0008  Ze status=0009
09:04:36 Check angles
09:04:36 SkyScan query
09:04:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.605<-17307  Statuses=0008 0009
09:04:37 Msec=2250  True Az=112.995  Ze=-79.605  Az status=0008  Ze status=0009
09:04:37 Check angles
09:04:37 SkyScan query
09:04:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.665<-15911  Statuses=0008 0009
09:04:37 Msec=3000  True Az=112.995  Ze=-58.665  Az status=0008  Ze status=0009
09:04:38 Check angles
09:04:38 SkyScan query
09:04:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.695<-14513  Statuses=0008 0009
09:04:38 Msec=3750  True Az=112.995  Ze=-37.695  Az status=0008  Ze status=0009
09:04:38 Check angles
09:04:38 SkyScan query
09:04:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.74<-13116  Statuses=0008 0009
09:04:39 Msec=4500  True Az=112.995  Ze=-16.74  Az status=0008  Ze status=0009
09:04:39 Check angles
09:04:39 SkyScan query
09:04:40 SkyScan query done: ret=0  az=112.995<-7533  ze=4.185<-11721  Statuses=0008 0009
09:04:40 Msec=5250  True Az=112.995  Ze=4.185  Az status=0008  Ze status=0009
09:04:40 Check angles
09:04:40 SkyScan query
09:04:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:04:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:04:40 Message to Master queued w/err=0: serial=188543 error=0
09:04:45 Received message from Master: op=Filter serial=188544
09:04:45 Color wheel filter change from 0 to 0
09:04:45 FLIGetFilterPos err=0  currentPosition=0
09:04:45 FLIGetStepsRemaining err=0  RemainingSteps=0
09:04:45 Filter is already there-color wheel unchanged
09:04:46 Received message from Master: op=Shutter serial=188545
09:04:46 Shutter LASER close
09:04:46 Received message from Camera: op=State serial=188547
09:04:46 GetSingleValue result=40  Value=cccccccc
09:04:46 SkyScan query
09:04:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:04:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:46 Parameters OK
09:04:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:46 Set A/D data flow result=40
09:04:46 Set A/D channel type result=40
09:04:46 Set A/D encoding result=40
09:04:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:46 Set channel filter=0.000000e+000  result=40
09:04:46 Config A/D  Result=40
09:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:46 Get A/D filter: -9.255963e+061  result=40
09:04:46 Get A/D value=-858993460  result=40
09:04:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:04:46 Parameters OK
09:04:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:04:46 Set A/D data flow result=40
09:04:46 Set A/D channel type result=40
09:04:46 Set A/D encoding result=40
09:04:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:04:46 Set channel filter=0.000000e+000  result=40
09:04:46 Config A/D  Result=40
09:04:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:04:46 Get A/D filter: -9.255963e+061  result=40
09:04:46 Get A/D value=-858993460  result=40
09:04:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:04:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:04:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:04:46 Aux=
09:04:46 Message to Camera, serial 188547 queued
09:05:23 Received message from Master: op=PointingHead serial=188560
09:05:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:05:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:05:23 Point started: ret=0
09:05:23 point_skyscan result=0
09:05:24 Check angles
09:05:24 SkyScan query
09:05:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:05:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:05:25 Message to Master queued w/err=0: serial=188560 error=0
09:05:30 Received message from Master: op=Filter serial=188561
09:05:30 Color wheel filter change from 0 to 0
09:05:30 FLIGetFilterPos err=0  currentPosition=0
09:05:30 FLIGetStepsRemaining err=0  RemainingSteps=0
09:05:30 Filter is already there-color wheel unchanged
09:05:30 Received message from Master: op=Shutter serial=188562
09:05:30 Shutter LASER close
09:05:30 Received message from Camera: op=State serial=188564
09:05:30 GetSingleValue result=40  Value=cccccccc
09:05:30 SkyScan query
09:05:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:05:31 Parameters OK
09:05:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:05:31 Set A/D data flow result=40
09:05:31 Set A/D channel type result=40
09:05:31 Set A/D encoding result=40
09:05:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:05:31 Set channel filter=0.000000e+000  result=40
09:05:31 Config A/D  Result=40
09:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:05:31 Get A/D filter: -9.255963e+061  result=40
09:05:31 Get A/D value=-858993460  result=40
09:05:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:05:31 Parameters OK
09:05:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:05:31 Set A/D data flow result=40
09:05:31 Set A/D channel type result=40
09:05:31 Set A/D encoding result=40
09:05:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:05:31 Set channel filter=0.000000e+000  result=40
09:05:31 Config A/D  Result=40
09:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:05:31 Get A/D filter: -9.255963e+061  result=40
09:05:31 Get A/D value=-858993460  result=40
09:05:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:05:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:05:31 Aux=
09:05:31 Message to Camera, serial 188564 queued
09:06:07 Received message from Master: op=PointingHead serial=188577
09:06:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:06:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:06:08 Point started: ret=0
09:06:08 point_skyscan result=0
09:06:09 Check angles
09:06:09 SkyScan query
09:06:09 SkyScan query done: ret=0  az=135.87<-9058  ze=-6.51<-12434  Statuses=0009 0008
09:06:09 Msec=0  True Az=135.87  Ze=-6.51  Az status=0009  Ze status=0008
09:06:09 Check angles
09:06:09 SkyScan query
09:06:10 SkyScan query done: ret=0  az=153.315<-10221  ze=-6.495<-12433  Statuses=0009 0008
09:06:10 Msec=750  True Az=153.315  Ze=-6.495  Az status=0009  Ze status=0008
09:06:10 Check angles
09:06:10 SkyScan query
09:06:11 SkyScan query done: ret=0  az=171.195<-11413  ze=-6.495<-12433  Statuses=0009 0008
09:06:11 Msec=1500  True Az=171.195  Ze=-6.495  Az status=0009  Ze status=0008
09:06:11 Check angles
09:06:11 SkyScan query
09:06:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:06:11 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:06:11 Message to Master queued w/err=0: serial=188577 error=0
09:06:16 Received message from Master: op=Filter serial=188578
09:06:16 Color wheel filter change from 0 to 0
09:06:16 FLIGetFilterPos err=0  currentPosition=0
09:06:16 FLIGetStepsRemaining err=0  RemainingSteps=0
09:06:16 Filter is already there-color wheel unchanged
09:06:17 Received message from Master: op=Shutter serial=188579
09:06:17 Shutter LASER close
09:06:17 Received message from Camera: op=State serial=188581
09:06:17 GetSingleValue result=40  Value=cccccccc
09:06:17 SkyScan query
09:06:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:06:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:06:17 Parameters OK
09:06:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:06:17 Set A/D data flow result=40
09:06:17 Set A/D channel type result=40
09:06:17 Set A/D encoding result=40
09:06:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:06:17 Set channel filter=0.000000e+000  result=40
09:06:17 Config A/D  Result=40
09:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:06:17 Get A/D filter: -9.255963e+061  result=40
09:06:17 Get A/D value=-858993460  result=40
09:06:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:06:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:06:17 Parameters OK
09:06:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:06:17 Set A/D data flow result=40
09:06:17 Set A/D channel type result=40
09:06:17 Set A/D encoding result=40
09:06:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:06:17 Set channel filter=0.000000e+000  result=40
09:06:17 Config A/D  Result=40
09:06:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:06:17 Get A/D filter: -9.255963e+061  result=40
09:06:17 Get A/D value=-858993460  result=40
09:06:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:06:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:06:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:06:17 Aux=
09:06:17 Message to Camera, serial 188581 queued
09:06:54 Received message from Master: op=PointingHead serial=188594
09:06:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:06:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:06:54 Point started: ret=0
09:06:54 point_skyscan result=0
09:06:55 Check angles
09:06:55 SkyScan query
09:06:56 SkyScan query done: ret=0  az=152.775<-10185  ze=6.51<-11566  Statuses=0009 0008
09:06:56 Msec=0  True Az=152.775  Ze=6.51  Az status=0009  Ze status=0008
09:06:56 Check angles
09:06:56 SkyScan query
09:06:56 SkyScan query done: ret=0  az=135.27<-9018  ze=6.495<-11567  Statuses=0009 0008
09:06:56 Msec=750  True Az=135.27  Ze=6.495  Az status=0009  Ze status=0008
09:06:57 Check angles
09:06:57 SkyScan query
09:06:57 SkyScan query done: ret=0  az=117.69<-7846  ze=6.495<-11567  Statuses=0009 0008
09:06:57 Msec=1500  True Az=117.69  Ze=6.495  Az status=0009  Ze status=0008
09:06:57 Check angles
09:06:57 SkyScan query
09:06:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:06:58 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:06:58 Message to Master queued w/err=0: serial=188594 error=0
09:07:03 Received message from Master: op=Filter serial=188595
09:07:03 Color wheel filter change from 0 to 0
09:07:03 FLIGetFilterPos err=0  currentPosition=0
09:07:03 FLIGetStepsRemaining err=0  RemainingSteps=0
09:07:03 Filter is already there-color wheel unchanged
09:07:03 Received message from Master: op=Shutter serial=188596
09:07:03 Shutter LASER close
09:07:03 Received message from Camera: op=State serial=188598
09:07:03 GetSingleValue result=40  Value=cccccccc
09:07:03 SkyScan query
09:07:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:07:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:07:04 Parameters OK
09:07:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:07:04 Set A/D data flow result=40
09:07:04 Set A/D channel type result=40
09:07:04 Set A/D encoding result=40
09:07:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:07:04 Set channel filter=0.000000e+000  result=40
09:07:04 Config A/D  Result=40
09:07:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:07:04 Get A/D filter: -9.255963e+061  result=40
09:07:04 Get A/D value=-858993460  result=40
09:07:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:07:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:07:04 Parameters OK
09:07:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:07:04 Set A/D data flow result=40
09:07:04 Set A/D channel type result=40
09:07:04 Set A/D encoding result=40
09:07:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:07:04 Set channel filter=0.000000e+000  result=40
09:07:04 Config A/D  Result=40
09:07:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:07:04 Get A/D filter: -9.255963e+061  result=40
09:07:04 Get A/D value=-858993460  result=40
09:07:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:07:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:07:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:07:04 Aux=
09:07:04 Message to Camera, serial 188598 queued
09:07:40 Received message from Master: op=PointingHead serial=188610
09:07:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:07:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:07:40 Point started: ret=0
09:07:40 point_skyscan result=0
09:07:41 Check angles
09:07:41 SkyScan query
09:07:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
09:07:41 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
09:07:41 Check angles
09:07:41 SkyScan query
09:07:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.085<-14939  Statuses=0008 0009
09:07:42 Msec=750  True Az=112.995  Ze=-44.085  Az status=0008  Ze status=0009
09:07:42 Check angles
09:07:42 SkyScan query
09:07:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.475<-16365  Statuses=0008 0009
09:07:43 Msec=1500  True Az=112.995  Ze=-65.475  Az status=0008  Ze status=0009
09:07:43 Check angles
09:07:43 SkyScan query
09:07:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.43<-17762  Statuses=0008 0009
09:07:44 Msec=2250  True Az=112.995  Ze=-86.43  Az status=0008  Ze status=0009
09:07:44 Check angles
09:07:44 SkyScan query
09:07:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
09:07:44 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
09:07:44 Check angles
09:07:44 SkyScan query
09:07:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.745<-20583  Statuses=0008 0009
09:07:45 Msec=3750  True Az=112.995  Ze=-128.745  Az status=0008  Ze status=0009
09:07:45 Check angles
09:07:45 SkyScan query
09:07:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
09:07:46 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
09:07:46 Check angles
09:07:46 SkyScan query
09:07:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
09:07:47 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
09:07:47 Check angles
09:07:47 SkyScan query
09:07:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:07:47 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:07:47 Message to Master queued w/err=0: serial=188610 error=0
09:07:52 Received message from Master: op=Filter serial=188611
09:07:52 Color wheel filter change from 0 to 0
09:07:52 FLIGetFilterPos err=0  currentPosition=0
09:07:52 FLIGetStepsRemaining err=0  RemainingSteps=0
09:07:52 Filter is already there-color wheel unchanged
09:07:52 Received message from Master: op=Shutter serial=188612
09:07:52 Shutter LASER open
09:07:53 Received message from Camera: op=State serial=188614
09:07:53 GetSingleValue result=40  Value=cccccccc
09:07:53 SkyScan query
09:07:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:07:53 Parameters OK
09:07:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:07:53 Set A/D data flow result=40
09:07:53 Set A/D channel type result=40
09:07:53 Set A/D encoding result=40
09:07:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:07:53 Set channel filter=0.000000e+000  result=40
09:07:53 Config A/D  Result=40
09:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:07:53 Get A/D filter: -9.255963e+061  result=40
09:07:53 Get A/D value=-858993460  result=40
09:07:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:07:53 Parameters OK
09:07:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:07:53 Set A/D data flow result=40
09:07:53 Set A/D channel type result=40
09:07:53 Set A/D encoding result=40
09:07:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:07:53 Set channel filter=0.000000e+000  result=40
09:07:53 Config A/D  Result=40
09:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:07:53 Get A/D filter: -9.255963e+061  result=40
09:07:53 Get A/D value=-858993460  result=40
09:07:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:07:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:07:53 Aux=
09:07:53 Message to Camera, serial 188614 queued
09:08:02 Received message from Master: op=Shutter serial=188624
09:08:02 Shutter LASER close
09:08:02 Received message from Master: op=PointingHead serial=188628
09:08:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:08:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:08:02 Point started: ret=0
09:08:02 point_skyscan result=0
09:08:03 Check angles
09:08:03 SkyScan query
09:08:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.785<-21519  Statuses=0008 0009
09:08:04 Msec=0  True Az=112.995  Ze=-142.785  Az status=0008  Ze status=0009
09:08:04 Check angles
09:08:04 SkyScan query
09:08:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.8<-20120  Statuses=0008 0009
09:08:05 Msec=750  True Az=112.995  Ze=-121.8  Az status=0008  Ze status=0009
09:08:05 Check angles
09:08:05 SkyScan query
09:08:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.875<-18725  Statuses=0008 0009
09:08:05 Msec=1500  True Az=112.995  Ze=-100.875  Az status=0008  Ze status=0009
09:08:05 Check angles
09:08:05 SkyScan query
09:08:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.935<-17329  Statuses=0008 0009
09:08:06 Msec=2250  True Az=112.995  Ze=-79.935  Az status=0008  Ze status=0009
09:08:06 Check angles
09:08:06 SkyScan query
09:08:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
09:08:07 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
09:08:07 Check angles
09:08:07 SkyScan query
09:08:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
09:08:08 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
09:08:08 Check angles
09:08:08 SkyScan query
09:08:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.04<-13136  Statuses=0008 0009
09:08:08 Msec=4500  True Az=112.995  Ze=-17.04  Az status=0008  Ze status=0009
09:08:08 Check angles
09:08:08 SkyScan query
09:08:09 SkyScan query done: ret=0  az=112.995<-7533  ze=3.915<-11739  Statuses=0008 0009
09:08:09 Msec=5250  True Az=112.995  Ze=3.915  Az status=0008  Ze status=0009
09:08:09 Check angles
09:08:09 SkyScan query
09:08:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:08:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:08:10 Message to Master queued w/err=0: serial=188628 error=0
09:08:15 Received message from Master: op=Filter serial=188629
09:08:15 Color wheel filter change from 0 to 0
09:08:15 FLIGetFilterPos err=0  currentPosition=0
09:08:15 FLIGetStepsRemaining err=0  RemainingSteps=0
09:08:15 Filter is already there-color wheel unchanged
09:08:15 Received message from Master: op=Shutter serial=188630
09:08:15 Shutter LASER close
09:08:15 Received message from Camera: op=State serial=188632
09:08:15 GetSingleValue result=40  Value=cccccccc
09:08:15 SkyScan query
09:08:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:08:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:16 Parameters OK
09:08:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:16 Set A/D data flow result=40
09:08:16 Set A/D channel type result=40
09:08:16 Set A/D encoding result=40
09:08:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:16 Set channel filter=0.000000e+000  result=40
09:08:16 Config A/D  Result=40
09:08:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:16 Get A/D filter: -9.255963e+061  result=40
09:08:16 Get A/D value=-858993460  result=40
09:08:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:16 Parameters OK
09:08:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:16 Set A/D data flow result=40
09:08:16 Set A/D channel type result=40
09:08:16 Set A/D encoding result=40
09:08:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:16 Set channel filter=0.000000e+000  result=40
09:08:16 Config A/D  Result=40
09:08:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:16 Get A/D filter: -9.255963e+061  result=40
09:08:16 Get A/D value=-858993460  result=40
09:08:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:08:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:08:16 Aux=
09:08:16 Message to Camera, serial 188632 queued
09:08:52 Received message from Master: op=PointingHead serial=188644
09:08:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:08:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:08:52 Point started: ret=0
09:08:52 point_skyscan result=0
09:08:53 Check angles
09:08:53 SkyScan query
09:08:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:08:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:08:53 Message to Master queued w/err=0: serial=188644 error=0
09:08:58 Received message from Master: op=Filter serial=188645
09:08:58 Color wheel filter change from 0 to 0
09:08:58 FLIGetFilterPos err=0  currentPosition=0
09:08:58 FLIGetStepsRemaining err=0  RemainingSteps=0
09:08:58 Filter is already there-color wheel unchanged
09:08:58 Received message from Master: op=Shutter serial=188646
09:08:58 Shutter LASER close
09:08:58 Received message from Camera: op=State serial=188648
09:08:58 GetSingleValue result=40  Value=cccccccc
09:08:58 SkyScan query
09:08:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:08:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:59 Parameters OK
09:08:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:59 Set A/D data flow result=40
09:08:59 Set A/D channel type result=40
09:08:59 Set A/D encoding result=40
09:08:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:59 Set channel filter=0.000000e+000  result=40
09:08:59 Config A/D  Result=40
09:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:59 Get A/D filter: -9.255963e+061  result=40
09:08:59 Get A/D value=-858993460  result=40
09:08:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:08:59 Parameters OK
09:08:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:08:59 Set A/D data flow result=40
09:08:59 Set A/D channel type result=40
09:08:59 Set A/D encoding result=40
09:08:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:08:59 Set channel filter=0.000000e+000  result=40
09:08:59 Config A/D  Result=40
09:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:08:59 Get A/D filter: -9.255963e+061  result=40
09:08:59 Get A/D value=-858993460  result=40
09:08:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:08:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:08:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:08:59 Aux=
09:08:59 Message to Camera, serial 188648 queued
09:09:36 Received message from Master: op=PointingHead serial=188661
09:09:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:09:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:09:36 Point started: ret=0
09:09:36 point_skyscan result=0
09:09:37 Check angles
09:09:37 SkyScan query
09:09:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:09:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:09:38 Message to Master queued w/err=0: serial=188661 error=0
09:09:43 Received message from Master: op=Filter serial=188662
09:09:43 Color wheel filter change from 0 to 0
09:09:43 FLIGetFilterPos err=0  currentPosition=0
09:09:43 FLIGetStepsRemaining err=0  RemainingSteps=0
09:09:43 Filter is already there-color wheel unchanged
09:09:43 Received message from Master: op=Shutter serial=188663
09:09:43 Shutter LASER close
09:09:43 Received message from Camera: op=State serial=188665
09:09:43 GetSingleValue result=40  Value=cccccccc
09:09:43 SkyScan query
09:09:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:09:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:09:43 Parameters OK
09:09:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:09:43 Set A/D data flow result=40
09:09:43 Set A/D channel type result=40
09:09:43 Set A/D encoding result=40
09:09:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:09:43 Set channel filter=0.000000e+000  result=40
09:09:43 Config A/D  Result=40
09:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:09:43 Get A/D filter: -9.255963e+061  result=40
09:09:43 Get A/D value=-858993460  result=40
09:09:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:09:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:09:43 Parameters OK
09:09:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:09:43 Set A/D data flow result=40
09:09:43 Set A/D channel type result=40
09:09:43 Set A/D encoding result=40
09:09:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:09:43 Set channel filter=0.000000e+000  result=40
09:09:43 Config A/D  Result=40
09:09:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:09:43 Get A/D filter: -9.255963e+061  result=40
09:09:43 Get A/D value=-858993460  result=40
09:09:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:09:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:09:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:09:43 Aux=
09:09:43 Message to Camera, serial 188665 queued
09:10:20 Received message from Master: op=PointingHead serial=188678
09:10:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:10:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:10:21 Point started: ret=0
09:10:21 point_skyscan result=0
09:10:21 Check angles
09:10:21 SkyScan query
09:10:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:10:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:10:22 Message to Master queued w/err=0: serial=188678 error=0
09:10:27 Received message from Master: op=Filter serial=188679
09:10:27 Color wheel filter change from 0 to 0
09:10:27 FLIGetFilterPos err=0  currentPosition=0
09:10:27 FLIGetStepsRemaining err=0  RemainingSteps=0
09:10:27 Filter is already there-color wheel unchanged
09:10:27 Received message from Master: op=Shutter serial=188680
09:10:27 Shutter LASER close
09:10:27 Received message from Camera: op=State serial=188682
09:10:27 GetSingleValue result=40  Value=cccccccc
09:10:27 SkyScan query
09:10:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:10:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:10:28 Parameters OK
09:10:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:10:28 Set A/D data flow result=40
09:10:28 Set A/D channel type result=40
09:10:28 Set A/D encoding result=40
09:10:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:10:28 Set channel filter=0.000000e+000  result=40
09:10:28 Config A/D  Result=40
09:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:10:28 Get A/D filter: -9.255963e+061  result=40
09:10:28 Get A/D value=-858993460  result=40
09:10:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:10:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:10:28 Parameters OK
09:10:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:10:28 Set A/D data flow result=40
09:10:28 Set A/D channel type result=40
09:10:28 Set A/D encoding result=40
09:10:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:10:28 Set channel filter=0.000000e+000  result=40
09:10:28 Config A/D  Result=40
09:10:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:10:28 Get A/D filter: -9.255963e+061  result=40
09:10:28 Get A/D value=-858993460  result=40
09:10:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:10:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:10:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:10:28 Aux=
09:10:28 Message to Camera, serial 188682 queued
09:11:04 Received message from Master: op=PointingHead serial=188695
09:11:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:11:04 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:11:05 Point started: ret=0
09:11:05 point_skyscan result=0
09:11:06 Check angles
09:11:06 SkyScan query
09:11:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
09:11:06 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
09:11:06 Check angles
09:11:06 SkyScan query
09:11:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.355<-14957  Statuses=0008 0009
09:11:07 Msec=750  True Az=112.995  Ze=-44.355  Az status=0008  Ze status=0009
09:11:07 Check angles
09:11:07 SkyScan query
09:11:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.25<-16350  Statuses=0008 0009
09:11:08 Msec=1500  True Az=112.995  Ze=-65.25  Az status=0008  Ze status=0009
09:11:08 Check angles
09:11:08 SkyScan query
09:11:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.655<-17777  Statuses=0008 0009
09:11:08 Msec=2250  True Az=112.995  Ze=-86.655  Az status=0008  Ze status=0009
09:11:09 Check angles
09:11:09 SkyScan query
09:11:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.595<-19173  Statuses=0008 0009
09:11:09 Msec=3000  True Az=112.995  Ze=-107.595  Az status=0008  Ze status=0009
09:11:09 Check angles
09:11:09 SkyScan query
09:11:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.535<-20569  Statuses=0008 0009
09:11:10 Msec=3750  True Az=112.995  Ze=-128.535  Az status=0008  Ze status=0009
09:11:10 Check angles
09:11:10 SkyScan query
09:11:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.925<-21995  Statuses=0008 0009
09:11:11 Msec=4500  True Az=112.995  Ze=-149.925  Az status=0008  Ze status=0009
09:11:11 Check angles
09:11:11 SkyScan query
09:11:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.82<-23388  Statuses=0008 0009
09:11:11 Msec=5250  True Az=112.995  Ze=-170.82  Az status=0008  Ze status=0009
09:11:12 Check angles
09:11:12 SkyScan query
09:11:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:11:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:11:12 Message to Master queued w/err=0: serial=188695 error=0
09:11:17 Received message from Master: op=Filter serial=188696
09:11:17 Color wheel filter change from 0 to 0
09:11:17 FLIGetFilterPos err=0  currentPosition=0
09:11:17 FLIGetStepsRemaining err=0  RemainingSteps=0
09:11:17 Filter is already there-color wheel unchanged
09:11:17 Received message from Master: op=Shutter serial=188697
09:11:17 Shutter LASER open
09:11:18 Received message from Camera: op=State serial=188699
09:11:18 GetSingleValue result=40  Value=cccccccc
09:11:18 SkyScan query
09:11:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:18 Parameters OK
09:11:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:18 Set A/D data flow result=40
09:11:18 Set A/D channel type result=40
09:11:18 Set A/D encoding result=40
09:11:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:18 Set channel filter=0.000000e+000  result=40
09:11:18 Config A/D  Result=40
09:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:18 Get A/D filter: -9.255963e+061  result=40
09:11:18 Get A/D value=-858993460  result=40
09:11:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:18 Parameters OK
09:11:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:18 Set A/D data flow result=40
09:11:18 Set A/D channel type result=40
09:11:18 Set A/D encoding result=40
09:11:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:18 Set channel filter=0.000000e+000  result=40
09:11:18 Config A/D  Result=40
09:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:18 Get A/D filter: -9.255963e+061  result=40
09:11:18 Get A/D value=-858993460  result=40
09:11:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:11:18 Aux=
09:11:18 Message to Camera, serial 188699 queued
09:11:27 Received message from Master: op=Shutter serial=188709
09:11:27 Shutter LASER close
09:11:27 Received message from Master: op=PointingHead serial=188713
09:11:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:11:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:11:27 Point started: ret=0
09:11:27 point_skyscan result=0
09:11:28 Check angles
09:11:28 SkyScan query
09:11:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
09:11:29 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
09:11:29 Check angles
09:11:29 SkyScan query
09:11:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
09:11:30 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
09:11:30 Check angles
09:11:30 SkyScan query
09:11:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.28<-18752  Statuses=0008 0009
09:11:30 Msec=1500  True Az=112.995  Ze=-101.28  Az status=0008  Ze status=0009
09:11:30 Check angles
09:11:30 SkyScan query
09:11:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
09:11:31 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
09:11:31 Check angles
09:11:31 SkyScan query
09:11:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
09:11:32 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
09:11:32 Check angles
09:11:32 SkyScan query
09:11:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
09:11:33 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
09:11:33 Check angles
09:11:33 SkyScan query
09:11:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.46<-13164  Statuses=0008 0009
09:11:33 Msec=4500  True Az=112.995  Ze=-17.46  Az status=0008  Ze status=0009
09:11:33 Check angles
09:11:33 SkyScan query
09:11:34 SkyScan query done: ret=0  az=112.995<-7533  ze=3.51<-11766  Statuses=0008 0009
09:11:34 Msec=5250  True Az=112.995  Ze=3.51  Az status=0008  Ze status=0009
09:11:34 Check angles
09:11:34 SkyScan query
09:11:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:11:35 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:11:35 Message to Master queued w/err=0: serial=188713 error=0
09:11:40 Received message from Master: op=Filter serial=188714
09:11:40 Color wheel filter change from 0 to 0
09:11:40 FLIGetFilterPos err=0  currentPosition=0
09:11:40 FLIGetStepsRemaining err=0  RemainingSteps=0
09:11:40 Filter is already there-color wheel unchanged
09:11:40 Received message from Master: op=Shutter serial=188715
09:11:40 Shutter LASER close
09:11:40 Received message from Camera: op=State serial=188717
09:11:40 GetSingleValue result=40  Value=cccccccc
09:11:40 SkyScan query
09:11:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:11:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:41 Parameters OK
09:11:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:41 Set A/D data flow result=40
09:11:41 Set A/D channel type result=40
09:11:41 Set A/D encoding result=40
09:11:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:41 Set channel filter=0.000000e+000  result=40
09:11:41 Config A/D  Result=40
09:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:41 Get A/D filter: -9.255963e+061  result=40
09:11:41 Get A/D value=-858993460  result=40
09:11:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:11:41 Parameters OK
09:11:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:11:41 Set A/D data flow result=40
09:11:41 Set A/D channel type result=40
09:11:41 Set A/D encoding result=40
09:11:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:11:41 Set channel filter=0.000000e+000  result=40
09:11:41 Config A/D  Result=40
09:11:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:11:41 Get A/D filter: -9.255963e+061  result=40
09:11:41 Get A/D value=-858993460  result=40
09:11:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:11:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:11:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:11:41 Aux=
09:11:41 Message to Camera, serial 188717 queued
09:12:18 Received message from Master: op=PointingHead serial=188730
09:12:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:12:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:12:18 Point started: ret=0
09:12:18 point_skyscan result=0
09:12:19 Check angles
09:12:19 SkyScan query
09:12:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:12:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:12:19 Message to Master queued w/err=0: serial=188730 error=0
09:12:24 Received message from Master: op=Filter serial=188731
09:12:24 Color wheel filter change from 0 to 0
09:12:24 FLIGetFilterPos err=0  currentPosition=0
09:12:24 FLIGetStepsRemaining err=0  RemainingSteps=0
09:12:24 Filter is already there-color wheel unchanged
09:12:24 Received message from Master: op=Shutter serial=188732
09:12:24 Shutter LASER close
09:12:24 Received message from Camera: op=State serial=188734
09:12:24 GetSingleValue result=40  Value=cccccccc
09:12:24 SkyScan query
09:12:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:12:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:12:25 Parameters OK
09:12:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:12:25 Set A/D data flow result=40
09:12:25 Set A/D channel type result=40
09:12:25 Set A/D encoding result=40
09:12:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:12:25 Set channel filter=0.000000e+000  result=40
09:12:25 Config A/D  Result=40
09:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:12:25 Get A/D filter: -9.255963e+061  result=40
09:12:25 Get A/D value=-858993460  result=40
09:12:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:12:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:12:25 Parameters OK
09:12:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:12:25 Set A/D data flow result=40
09:12:25 Set A/D channel type result=40
09:12:25 Set A/D encoding result=40
09:12:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:12:25 Set channel filter=0.000000e+000  result=40
09:12:25 Config A/D  Result=40
09:12:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:12:25 Get A/D filter: -9.255963e+061  result=40
09:12:25 Get A/D value=-858993460  result=40
09:12:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:12:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:12:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:12:25 Aux=
09:12:25 Message to Camera, serial 188734 queued
09:13:02 Received message from Master: op=PointingHead serial=188747
09:13:02 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:13:02 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:13:02 Point started: ret=0
09:13:02 point_skyscan result=0
09:13:03 Check angles
09:13:03 SkyScan query
09:13:04 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
09:13:04 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
09:13:04 Check angles
09:13:04 SkyScan query
09:13:04 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
09:13:04 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
09:13:04 Check angles
09:13:04 SkyScan query
09:13:05 SkyScan query done: ret=0  az=170.955<-11397  ze=-6.495<-12433  Statuses=0009 0008
09:13:05 Msec=1500  True Az=170.955  Ze=-6.495  Az status=0009  Ze status=0008
09:13:05 Check angles
09:13:05 SkyScan query
09:13:06 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:13:06 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:13:06 Message to Master queued w/err=0: serial=188747 error=0
09:13:11 Received message from Master: op=Filter serial=188748
09:13:11 Color wheel filter change from 0 to 0
09:13:11 FLIGetFilterPos err=0  currentPosition=0
09:13:11 FLIGetStepsRemaining err=0  RemainingSteps=0
09:13:11 Filter is already there-color wheel unchanged
09:13:11 Received message from Master: op=Shutter serial=188749
09:13:11 Shutter LASER close
09:13:11 Received message from Camera: op=State serial=188751
09:13:11 GetSingleValue result=40  Value=cccccccc
09:13:11 SkyScan query
09:13:12 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:13:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:13:12 Parameters OK
09:13:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:13:12 Set A/D data flow result=40
09:13:12 Set A/D channel type result=40
09:13:12 Set A/D encoding result=40
09:13:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:13:12 Set channel filter=0.000000e+000  result=40
09:13:12 Config A/D  Result=40
09:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:13:12 Get A/D filter: -9.255963e+061  result=40
09:13:12 Get A/D value=-858993460  result=40
09:13:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:13:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:13:12 Parameters OK
09:13:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:13:12 Set A/D data flow result=40
09:13:12 Set A/D channel type result=40
09:13:12 Set A/D encoding result=40
09:13:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:13:12 Set channel filter=0.000000e+000  result=40
09:13:12 Config A/D  Result=40
09:13:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:13:12 Get A/D filter: -9.255963e+061  result=40
09:13:12 Get A/D value=-858993460  result=40
09:13:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:13:12 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:13:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:13:12 Aux=
09:13:12 Message to Camera, serial 188751 queued
09:13:47 Received message from Master: op=PointingHead serial=188763
09:13:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:13:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:13:48 Point started: ret=0
09:13:48 point_skyscan result=0
09:13:49 Check angles
09:13:49 SkyScan query
09:13:49 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
09:13:49 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
09:13:49 Check angles
09:13:49 SkyScan query
09:13:50 SkyScan query done: ret=0  az=135.135<-9009  ze=6.495<-11567  Statuses=0009 0008
09:13:50 Msec=750  True Az=135.135  Ze=6.495  Az status=0009  Ze status=0008
09:13:50 Check angles
09:13:50 SkyScan query
09:13:51 SkyScan query done: ret=0  az=117.705<-7847  ze=6.495<-11567  Statuses=0009 0008
09:13:51 Msec=1500  True Az=117.705  Ze=6.495  Az status=0009  Ze status=0008
09:13:51 Check angles
09:13:51 SkyScan query
09:13:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:13:51 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:13:51 Message to Master queued w/err=0: serial=188763 error=0
09:13:56 Received message from Master: op=Filter serial=188764
09:13:56 Color wheel filter change from 0 to 0
09:13:56 FLIGetFilterPos err=0  currentPosition=0
09:13:56 FLIGetStepsRemaining err=0  RemainingSteps=0
09:13:56 Filter is already there-color wheel unchanged
09:13:57 Received message from Master: op=Shutter serial=188765
09:13:57 Shutter LASER close
09:13:57 Received message from Camera: op=State serial=188767
09:13:57 GetSingleValue result=40  Value=cccccccc
09:13:57 SkyScan query
09:13:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:13:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:13:57 Parameters OK
09:13:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:13:57 Set A/D data flow result=40
09:13:57 Set A/D channel type result=40
09:13:57 Set A/D encoding result=40
09:13:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:13:57 Set channel filter=0.000000e+000  result=40
09:13:57 Config A/D  Result=40
09:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:13:57 Get A/D filter: -9.255963e+061  result=40
09:13:57 Get A/D value=-858993460  result=40
09:13:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:13:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:13:57 Parameters OK
09:13:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:13:57 Set A/D data flow result=40
09:13:57 Set A/D channel type result=40
[UTC 2019-3-9  09:13:57]
09:13:57 Set A/D encoding result=40
09:13:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:13:57 Set channel filter=0.000000e+000  result=40
09:13:57 Config A/D  Result=40
09:13:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:13:57 Get A/D filter: -9.255963e+061  result=40
09:13:57 Get A/D value=-858993460  result=40
09:13:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:13:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:13:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:13:57 Aux=
09:13:57 Message to Camera, serial 188767 queued
09:14:34 Received message from Master: op=PointingHead serial=188780
09:14:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:14:34 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:14:34 Point started: ret=0
09:14:34 point_skyscan result=0
09:14:35 Check angles
09:14:35 SkyScan query
09:14:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
09:14:36 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
09:14:36 Check angles
09:14:36 SkyScan query
09:14:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.13<-14942  Statuses=0008 0009
09:14:36 Msec=750  True Az=112.995  Ze=-44.13  Az status=0008  Ze status=0009
09:14:37 Check angles
09:14:37 SkyScan query
09:14:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.07<-16338  Statuses=0008 0009
09:14:37 Msec=1500  True Az=112.995  Ze=-65.07  Az status=0008  Ze status=0009
09:14:37 Check angles
09:14:37 SkyScan query
09:14:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.025<-17735  Statuses=0008 0009
09:14:38 Msec=2250  True Az=112.995  Ze=-86.025  Az status=0008  Ze status=0009
09:14:38 Check angles
09:14:38 SkyScan query
09:14:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.98<-19132  Statuses=0008 0009
09:14:39 Msec=3000  True Az=112.995  Ze=-106.98  Az status=0008  Ze status=0009
09:14:39 Check angles
09:14:39 SkyScan query
09:14:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
09:14:39 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
09:14:40 Check angles
09:14:40 SkyScan query
09:14:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.89<-21926  Statuses=0008 0009
09:14:40 Msec=4500  True Az=112.995  Ze=-148.89  Az status=0008  Ze status=0009
09:14:40 Check angles
09:14:40 SkyScan query
09:14:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.83<-23322  Statuses=0008 0009
09:14:41 Msec=5250  True Az=112.995  Ze=-169.83  Az status=0008  Ze status=0009
09:14:41 Check angles
09:14:41 SkyScan query
09:14:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:14:42 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:14:42 Message to Master queued w/err=0: serial=188780 error=0
09:14:47 Received message from Master: op=Filter serial=188781
09:14:47 Color wheel filter change from 0 to 0
09:14:47 FLIGetFilterPos err=0  currentPosition=0
09:14:47 FLIGetStepsRemaining err=0  RemainingSteps=0
09:14:47 Filter is already there-color wheel unchanged
09:14:47 Received message from Master: op=Shutter serial=188782
09:14:47 Shutter LASER open
09:14:47 Received message from Camera: op=State serial=188784
09:14:47 GetSingleValue result=40  Value=cccccccc
09:14:47 SkyScan query
09:14:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:14:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:14:48 Parameters OK
09:14:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:14:48 Set A/D data flow result=40
09:14:48 Set A/D channel type result=40
09:14:48 Set A/D encoding result=40
09:14:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:14:48 Set channel filter=0.000000e+000  result=40
09:14:48 Config A/D  Result=40
09:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:14:48 Get A/D filter: -9.255963e+061  result=40
09:14:48 Get A/D value=-858993460  result=40
09:14:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:14:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:14:48 Parameters OK
09:14:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:14:48 Set A/D data flow result=40
09:14:48 Set A/D channel type result=40
09:14:48 Set A/D encoding result=40
09:14:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:14:48 Set channel filter=0.000000e+000  result=40
09:14:48 Config A/D  Result=40
09:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:14:48 Get A/D filter: -9.255963e+061  result=40
09:14:48 Get A/D value=-858993460  result=40
09:14:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:14:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:14:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:14:48 Aux=
09:14:48 Message to Camera, serial 188784 queued
09:14:56 Received message from Master: op=Shutter serial=188794
09:14:56 Shutter LASER close
09:14:56 Received message from Master: op=PointingHead serial=188798
09:14:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:14:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:14:57 Point started: ret=0
09:14:57 point_skyscan result=0
09:14:58 Check angles
09:14:58 SkyScan query
09:14:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.295<-21553  Statuses=0008 0009
09:14:58 Msec=0  True Az=112.995  Ze=-143.295  Az status=0008  Ze status=0009
09:14:58 Check angles
09:14:58 SkyScan query
09:14:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.785<-20119  Statuses=0008 0009
09:14:59 Msec=750  True Az=112.995  Ze=-121.785  Az status=0008  Ze status=0009
09:14:59 Check angles
09:14:59 SkyScan query
09:15:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.515<-18701  Statuses=0008 0009
09:15:00 Msec=1500  True Az=112.995  Ze=-100.515  Az status=0008  Ze status=0009
09:15:00 Check angles
09:15:00 SkyScan query
09:15:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.56<-17304  Statuses=0008 0009
09:15:00 Msec=2250  True Az=112.995  Ze=-79.56  Az status=0008  Ze status=0009
09:15:01 Check angles
09:15:01 SkyScan query
09:15:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.14<-15876  Statuses=0008 0009
09:15:01 Msec=3000  True Az=112.995  Ze=-58.14  Az status=0008  Ze status=0009
09:15:01 Check angles
09:15:01 SkyScan query
09:15:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.78<-14452  Statuses=0008 0009
09:15:02 Msec=3750  True Az=112.995  Ze=-36.78  Az status=0008  Ze status=0009
09:15:02 Check angles
09:15:02 SkyScan query
09:15:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.81<-13054  Statuses=0008 0009
09:15:03 Msec=4500  True Az=112.995  Ze=-15.81  Az status=0008  Ze status=0009
09:15:03 Check angles
09:15:03 SkyScan query
09:15:03 SkyScan query done: ret=0  az=112.995<-7533  ze=4.89<-11674  Statuses=0008 0009
09:15:03 Msec=5250  True Az=112.995  Ze=4.89  Az status=0008  Ze status=0009
09:15:04 Check angles
09:15:04 SkyScan query
09:15:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:15:04 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:15:04 Message to Master queued w/err=0: serial=188798 error=0
09:15:09 Received message from Master: op=Filter serial=188799
09:15:09 Color wheel filter change from 0 to 0
09:15:09 FLIGetFilterPos err=0  currentPosition=0
09:15:09 FLIGetStepsRemaining err=0  RemainingSteps=0
09:15:09 Filter is already there-color wheel unchanged
09:15:09 Received message from Master: op=Shutter serial=188800
09:15:09 Shutter LASER close
09:15:10 Received message from Camera: op=State serial=188802
09:15:10 GetSingleValue result=40  Value=cccccccc
09:15:10 SkyScan query
09:15:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:15:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:10 Parameters OK
09:15:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:10 Set A/D data flow result=40
09:15:10 Set A/D channel type result=40
09:15:10 Set A/D encoding result=40
09:15:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:10 Set channel filter=0.000000e+000  result=40
09:15:10 Config A/D  Result=40
09:15:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:10 Get A/D filter: -9.255963e+061  result=40
09:15:10 Get A/D value=-858993460  result=40
09:15:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:10 Parameters OK
09:15:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:10 Set A/D data flow result=40
09:15:10 Set A/D channel type result=40
09:15:10 Set A/D encoding result=40
09:15:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:10 Set channel filter=0.000000e+000  result=40
09:15:10 Config A/D  Result=40
09:15:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:10 Get A/D filter: -9.255963e+061  result=40
09:15:10 Get A/D value=-858993460  result=40
09:15:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:15:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:15:10 Aux=
09:15:10 Message to Camera, serial 188802 queued
09:15:47 Received message from Master: op=PointingHead serial=188815
09:15:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:15:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:15:47 Point started: ret=0
09:15:47 point_skyscan result=0
09:15:48 Check angles
09:15:48 SkyScan query
09:15:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:15:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:15:49 Message to Master queued w/err=0: serial=188815 error=0
09:15:54 Received message from Master: op=Filter serial=188816
09:15:54 Color wheel filter change from 0 to 0
09:15:54 FLIGetFilterPos err=0  currentPosition=0
09:15:54 FLIGetStepsRemaining err=0  RemainingSteps=0
09:15:54 Filter is already there-color wheel unchanged
09:15:54 Received message from Master: op=Shutter serial=188817
09:15:54 Shutter LASER close
09:15:54 Received message from Camera: op=State serial=188819
09:15:54 GetSingleValue result=40  Value=cccccccc
09:15:54 SkyScan query
09:15:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:15:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:54 Parameters OK
09:15:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:54 Set A/D data flow result=40
09:15:54 Set A/D channel type result=40
09:15:54 Set A/D encoding result=40
09:15:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:54 Set channel filter=0.000000e+000  result=40
09:15:54 Config A/D  Result=40
09:15:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:54 Get A/D filter: -9.255963e+061  result=40
09:15:54 Get A/D value=-858993460  result=40
09:15:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:15:54 Parameters OK
09:15:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:15:54 Set A/D data flow result=40
09:15:54 Set A/D channel type result=40
09:15:54 Set A/D encoding result=40
09:15:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:15:54 Set channel filter=0.000000e+000  result=40
09:15:54 Config A/D  Result=40
09:15:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:15:54 Get A/D filter: -9.255963e+061  result=40
09:15:54 Get A/D value=-858993460  result=40
09:15:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:15:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:15:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:15:54 Aux=
09:15:54 Message to Camera, serial 188819 queued
09:16:31 Received message from Master: op=PointingHead serial=188832
09:16:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:16:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:16:32 Point started: ret=0
09:16:32 point_skyscan result=0
09:16:32 Check angles
09:16:32 SkyScan query
09:16:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:16:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:16:33 Message to Master queued w/err=0: serial=188832 error=0
09:16:38 Received message from Master: op=Filter serial=188833
09:16:38 Color wheel filter change from 0 to 0
09:16:38 FLIGetFilterPos err=0  currentPosition=0
09:16:38 FLIGetStepsRemaining err=0  RemainingSteps=0
09:16:38 Filter is already there-color wheel unchanged
09:16:38 Received message from Master: op=Shutter serial=188834
09:16:38 Shutter LASER close
09:16:38 Received message from Camera: op=State serial=188836
09:16:38 GetSingleValue result=40  Value=cccccccc
09:16:38 SkyScan query
09:16:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:16:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:16:39 Parameters OK
09:16:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:16:39 Set A/D data flow result=40
09:16:39 Set A/D channel type result=40
09:16:39 Set A/D encoding result=40
09:16:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:16:39 Set channel filter=0.000000e+000  result=40
09:16:39 Config A/D  Result=40
09:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:16:39 Get A/D filter: -9.255963e+061  result=40
09:16:39 Get A/D value=-858993460  result=40
09:16:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:16:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:16:39 Parameters OK
09:16:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:16:39 Set A/D data flow result=40
09:16:39 Set A/D channel type result=40
09:16:39 Set A/D encoding result=40
09:16:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:16:39 Set channel filter=0.000000e+000  result=40
09:16:39 Config A/D  Result=40
09:16:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:16:39 Get A/D filter: -9.255963e+061  result=40
09:16:39 Get A/D value=-858993460  result=40
09:16:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:16:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:16:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:16:39 Aux=
09:16:39 Message to Camera, serial 188836 queued
09:17:15 Received message from Master: op=PointingHead serial=188849
09:17:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:17:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:17:16 Point started: ret=0
09:17:16 point_skyscan result=0
09:17:17 Check angles
09:17:17 SkyScan query
09:17:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:17:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:17:17 Message to Master queued w/err=0: serial=188849 error=0
09:17:22 Received message from Master: op=Filter serial=188850
09:17:22 Color wheel filter change from 0 to 0
09:17:22 FLIGetFilterPos err=0  currentPosition=0
09:17:22 FLIGetStepsRemaining err=0  RemainingSteps=0
09:17:22 Filter is already there-color wheel unchanged
09:17:22 Received message from Master: op=Shutter serial=188851
09:17:22 Shutter LASER close
09:17:22 Received message from Camera: op=State serial=188853
09:17:22 GetSingleValue result=40  Value=cccccccc
09:17:22 SkyScan query
09:17:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:17:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:17:23 Parameters OK
09:17:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:17:23 Set A/D data flow result=40
09:17:23 Set A/D channel type result=40
09:17:23 Set A/D encoding result=40
09:17:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:17:23 Set channel filter=0.000000e+000  result=40
09:17:23 Config A/D  Result=40
09:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:17:23 Get A/D filter: -9.255963e+061  result=40
09:17:23 Get A/D value=-858993460  result=40
09:17:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:17:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:17:23 Parameters OK
09:17:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:17:23 Set A/D data flow result=40
09:17:23 Set A/D channel type result=40
09:17:23 Set A/D encoding result=40
09:17:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:17:23 Set channel filter=0.000000e+000  result=40
09:17:23 Config A/D  Result=40
09:17:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:17:23 Get A/D filter: -9.255963e+061  result=40
09:17:23 Get A/D value=-858993460  result=40
09:17:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:17:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:17:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:17:23 Aux=
09:17:23 Message to Camera, serial 188853 queued
09:18:00 Received message from Master: op=PointingHead serial=188866
09:18:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:18:00 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:18:00 Point started: ret=0
09:18:00 point_skyscan result=0
09:18:01 Check angles
09:18:01 SkyScan query
09:18:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
09:18:01 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
09:18:02 Check angles
09:18:02 SkyScan query
09:18:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
09:18:02 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
09:18:02 Check angles
09:18:02 SkyScan query
09:18:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.34<-16356  Statuses=0008 0009
09:18:03 Msec=1500  True Az=112.995  Ze=-65.34  Az status=0008  Ze status=0009
09:18:03 Check angles
09:18:03 SkyScan query
09:18:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
09:18:04 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
09:18:04 Check angles
09:18:04 SkyScan query
09:18:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.105<-19207  Statuses=0008 0009
09:18:04 Msec=3000  True Az=112.995  Ze=-108.105  Az status=0008  Ze status=0009
09:18:05 Check angles
09:18:05 SkyScan query
09:18:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.51<-20634  Statuses=0008 0009
09:18:05 Msec=3750  True Az=112.995  Ze=-129.51  Az status=0008  Ze status=0009
09:18:05 Check angles
09:18:05 SkyScan query
09:18:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.45<-22030  Statuses=0008 0009
09:18:06 Msec=4500  True Az=112.995  Ze=-150.45  Az status=0008  Ze status=0009
09:18:06 Check angles
09:18:06 SkyScan query
09:18:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.195<-23413  Statuses=0008 0009
09:18:07 Msec=5250  True Az=112.995  Ze=-171.195  Az status=0008  Ze status=0009
09:18:07 Check angles
09:18:07 SkyScan query
09:18:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:18:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:18:08 Message to Master queued w/err=0: serial=188866 error=0
09:18:13 Received message from Master: op=Filter serial=188867
09:18:13 Color wheel filter change from 0 to 0
09:18:13 FLIGetFilterPos err=0  currentPosition=0
09:18:13 FLIGetStepsRemaining err=0  RemainingSteps=0
09:18:13 Filter is already there-color wheel unchanged
09:18:13 Received message from Master: op=Shutter serial=188868
09:18:13 Shutter LASER open
09:18:13 Received message from Camera: op=State serial=188870
09:18:13 GetSingleValue result=40  Value=cccccccc
09:18:13 SkyScan query
09:18:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:14 Parameters OK
09:18:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:14 Set A/D data flow result=40
09:18:14 Set A/D channel type result=40
09:18:14 Set A/D encoding result=40
09:18:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:14 Set channel filter=0.000000e+000  result=40
09:18:14 Config A/D  Result=40
09:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:14 Get A/D filter: -9.255963e+061  result=40
09:18:14 Get A/D value=-858993460  result=40
09:18:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:14 Parameters OK
09:18:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:14 Set A/D data flow result=40
09:18:14 Set A/D channel type result=40
09:18:14 Set A/D encoding result=40
09:18:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:14 Set channel filter=0.000000e+000  result=40
09:18:14 Config A/D  Result=40
09:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:14 Get A/D filter: -9.255963e+061  result=40
09:18:14 Get A/D value=-858993460  result=40
09:18:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:18:14 Aux=
09:18:14 Message to Camera, serial 188870 queued
09:18:22 Received message from Master: op=Shutter serial=188880
09:18:22 Shutter LASER close
09:18:23 Received message from Master: op=PointingHead serial=188884
09:18:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:18:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:18:23 Point started: ret=0
09:18:23 point_skyscan result=0
09:18:24 Check angles
09:18:24 SkyScan query
09:18:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
09:18:24 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
09:18:24 Check angles
09:18:24 SkyScan query
09:18:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.475<-20165  Statuses=0008 0009
09:18:25 Msec=750  True Az=112.995  Ze=-122.475  Az status=0008  Ze status=0009
09:18:25 Check angles
09:18:25 SkyScan query
09:18:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.505<-18767  Statuses=0008 0009
09:18:26 Msec=1500  True Az=112.995  Ze=-101.505  Az status=0008  Ze status=0009
09:18:26 Check angles
09:18:26 SkyScan query
09:18:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.535<-17369  Statuses=0008 0009
09:18:26 Msec=2250  True Az=112.995  Ze=-80.535  Az status=0008  Ze status=0009
09:18:27 Check angles
09:18:27 SkyScan query
09:18:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.175<-15945  Statuses=0008 0009
09:18:27 Msec=3000  True Az=112.995  Ze=-59.175  Az status=0008  Ze status=0009
09:18:27 Check angles
09:18:27 SkyScan query
09:18:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.19<-14546  Statuses=0008 0009
09:18:28 Msec=3750  True Az=112.995  Ze=-38.19  Az status=0008  Ze status=0009
09:18:28 Check angles
09:18:28 SkyScan query
09:18:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
09:18:29 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
09:18:29 Check angles
09:18:29 SkyScan query
09:18:29 SkyScan query done: ret=0  az=112.995<-7533  ze=3.705<-11753  Statuses=0008 0009
09:18:29 Msec=5250  True Az=112.995  Ze=3.705  Az status=0008  Ze status=0009
09:18:30 Check angles
09:18:30 SkyScan query
09:18:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:18:30 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:18:30 Message to Master queued w/err=0: serial=188884 error=0
09:18:35 Received message from Master: op=Filter serial=188885
09:18:35 Color wheel filter change from 0 to 0
09:18:35 FLIGetFilterPos err=0  currentPosition=0
09:18:35 FLIGetStepsRemaining err=0  RemainingSteps=0
09:18:35 Filter is already there-color wheel unchanged
09:18:35 Received message from Master: op=Shutter serial=188886
09:18:35 Shutter LASER close
09:18:36 Received message from Camera: op=State serial=188888
09:18:36 GetSingleValue result=40  Value=cccccccc
09:18:36 SkyScan query
09:18:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:18:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:36 Parameters OK
09:18:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:36 Set A/D data flow result=40
09:18:36 Set A/D channel type result=40
09:18:36 Set A/D encoding result=40
09:18:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:36 Set channel filter=0.000000e+000  result=40
09:18:36 Config A/D  Result=40
09:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:36 Get A/D filter: -9.255963e+061  result=40
09:18:36 Get A/D value=-858993460  result=40
09:18:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:18:36 Parameters OK
09:18:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:18:36 Set A/D data flow result=40
09:18:36 Set A/D channel type result=40
09:18:36 Set A/D encoding result=40
09:18:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:18:36 Set channel filter=0.000000e+000  result=40
09:18:36 Config A/D  Result=40
09:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:18:36 Get A/D filter: -9.255963e+061  result=40
09:18:36 Get A/D value=-858993460  result=40
09:18:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:18:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:18:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:18:36 Aux=
09:18:36 Message to Camera, serial 188888 queued
09:19:13 Received message from Master: op=PointingHead serial=188901
09:19:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:19:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:19:13 Point started: ret=0
09:19:13 point_skyscan result=0
09:19:14 Check angles
09:19:14 SkyScan query
09:19:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:19:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:19:15 Message to Master queued w/err=0: serial=188901 error=0
09:19:20 Received message from Master: op=Filter serial=188902
09:19:20 Color wheel filter change from 0 to 0
09:19:20 FLIGetFilterPos err=0  currentPosition=0
09:19:20 FLIGetStepsRemaining err=0  RemainingSteps=0
09:19:20 Filter is already there-color wheel unchanged
09:19:20 Received message from Master: op=Shutter serial=188903
09:19:20 Shutter LASER close
09:19:20 Received message from Camera: op=State serial=188905
09:19:20 GetSingleValue result=40  Value=cccccccc
09:19:20 SkyScan query
09:19:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:19:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:19:20 Parameters OK
09:19:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:19:20 Set A/D data flow result=40
09:19:20 Set A/D channel type result=40
09:19:20 Set A/D encoding result=40
09:19:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:19:20 Set channel filter=0.000000e+000  result=40
09:19:20 Config A/D  Result=40
09:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:19:20 Get A/D filter: -9.255963e+061  result=40
09:19:20 Get A/D value=-858993460  result=40
09:19:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:19:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:19:20 Parameters OK
09:19:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:19:20 Set A/D data flow result=40
09:19:20 Set A/D channel type result=40
09:19:20 Set A/D encoding result=40
09:19:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:19:20 Set channel filter=0.000000e+000  result=40
09:19:20 Config A/D  Result=40
09:19:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:19:20 Get A/D filter: -9.255963e+061  result=40
09:19:20 Get A/D value=-858993460  result=40
09:19:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:19:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:19:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:19:20 Aux=
09:19:20 Message to Camera, serial 188905 queued
09:19:57 Received message from Master: op=PointingHead serial=188918
09:19:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:19:57 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:19:58 Point started: ret=0
09:19:58 point_skyscan result=0
09:19:58 Check angles
09:19:58 SkyScan query
09:19:59 SkyScan query done: ret=0  az=136.335<-9089  ze=-6.51<-12434  Statuses=0009 0008
09:19:59 Msec=0  True Az=136.335  Ze=-6.51  Az status=0009  Ze status=0008
09:19:59 Check angles
09:19:59 SkyScan query
09:20:00 SkyScan query done: ret=0  az=154.155<-10277  ze=-6.495<-12433  Statuses=0009 0008
09:20:00 Msec=750  True Az=154.155  Ze=-6.495  Az status=0009  Ze status=0008
09:20:00 Check angles
09:20:00 SkyScan query
09:20:00 SkyScan query done: ret=0  az=171.615<-11441  ze=-6.495<-12433  Statuses=0009 0008
09:20:00 Msec=1500  True Az=171.615  Ze=-6.495  Az status=0009  Ze status=0008
09:20:01 Check angles
09:20:01 SkyScan query
09:20:01 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:20:01 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:20:01 Message to Master queued w/err=0: serial=188918 error=0
09:20:06 Received message from Master: op=Filter serial=188919
09:20:06 Color wheel filter change from 0 to 0
09:20:06 FLIGetFilterPos err=0  currentPosition=0
09:20:06 FLIGetStepsRemaining err=0  RemainingSteps=0
09:20:06 Filter is already there-color wheel unchanged
09:20:06 Received message from Master: op=Shutter serial=188920
09:20:06 Shutter LASER close
09:20:06 Received message from Camera: op=State serial=188922
09:20:06 GetSingleValue result=40  Value=cccccccc
09:20:06 SkyScan query
09:20:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:20:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:20:07 Parameters OK
09:20:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:20:07 Set A/D data flow result=40
09:20:07 Set A/D channel type result=40
09:20:07 Set A/D encoding result=40
09:20:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:20:07 Set channel filter=0.000000e+000  result=40
09:20:07 Config A/D  Result=40
09:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:20:07 Get A/D filter: -9.255963e+061  result=40
09:20:07 Get A/D value=-858993460  result=40
09:20:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:20:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:20:07 Parameters OK
09:20:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:20:07 Set A/D data flow result=40
09:20:07 Set A/D channel type result=40
09:20:07 Set A/D encoding result=40
09:20:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:20:07 Set channel filter=0.000000e+000  result=40
09:20:07 Config A/D  Result=40
09:20:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:20:07 Get A/D filter: -9.255963e+061  result=40
09:20:07 Get A/D value=-858993460  result=40
09:20:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:20:07 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:20:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:20:07 Aux=
09:20:07 Message to Camera, serial 188922 queued
09:20:44 Received message from Master: op=PointingHead serial=188935
09:20:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:20:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:20:44 Point started: ret=0
09:20:44 point_skyscan result=0
09:20:45 Check angles
09:20:45 SkyScan query
09:20:46 SkyScan query done: ret=0  az=153.015<-10201  ze=6.51<-11566  Statuses=0009 0008
09:20:46 Msec=0  True Az=153.015  Ze=6.51  Az status=0009  Ze status=0008
09:20:46 Check angles
09:20:46 SkyScan query
09:20:46 SkyScan query done: ret=0  az=135.57<-9038  ze=6.495<-11567  Statuses=0009 0008
09:20:46 Msec=750  True Az=135.57  Ze=6.495  Az status=0009  Ze status=0008
09:20:46 Check angles
09:20:46 SkyScan query
09:20:47 SkyScan query done: ret=0  az=117.99<-7866  ze=6.495<-11567  Statuses=0009 0008
09:20:47 Msec=1500  True Az=117.99  Ze=6.495  Az status=0009  Ze status=0008
09:20:47 Check angles
09:20:47 SkyScan query
09:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:20:48 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:20:48 Message to Master queued w/err=0: serial=188935 error=0
09:20:53 Received message from Master: op=Filter serial=188936
09:20:53 Color wheel filter change from 0 to 0
09:20:53 FLIGetFilterPos err=0  currentPosition=0
09:20:53 FLIGetStepsRemaining err=0  RemainingSteps=0
09:20:53 Filter is already there-color wheel unchanged
09:20:53 Received message from Master: op=Shutter serial=188937
09:20:53 Shutter LASER close
09:20:53 Received message from Camera: op=State serial=188939
09:20:53 GetSingleValue result=40  Value=cccccccc
09:20:53 SkyScan query
09:20:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:20:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:20:54 Parameters OK
09:20:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:20:54 Set A/D data flow result=40
09:20:54 Set A/D channel type result=40
09:20:54 Set A/D encoding result=40
09:20:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:20:54 Set channel filter=0.000000e+000  result=40
09:20:54 Config A/D  Result=40
09:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:20:54 Get A/D filter: -9.255963e+061  result=40
09:20:54 Get A/D value=-858993460  result=40
09:20:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:20:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:20:54 Parameters OK
09:20:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:20:54 Set A/D data flow result=40
09:20:54 Set A/D channel type result=40
09:20:54 Set A/D encoding result=40
09:20:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:20:54 Set channel filter=0.000000e+000  result=40
09:20:54 Config A/D  Result=40
09:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:20:54 Get A/D filter: -9.255963e+061  result=40
09:20:54 Get A/D value=-858993460  result=40
09:20:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:20:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:20:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:20:54 Aux=
09:20:54 Message to Camera, serial 188939 queued
09:21:30 Received message from Master: op=PointingHead serial=188952
09:21:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:21:30 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:21:31 Point started: ret=0
09:21:31 point_skyscan result=0
09:21:32 Check angles
09:21:32 SkyScan query
09:21:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-24.045<-13603  Statuses=0008 0009
09:21:32 Msec=0  True Az=112.995  Ze=-24.045  Az status=0008  Ze status=0009
09:21:32 Check angles
09:21:32 SkyScan query
09:21:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.39<-15026  Statuses=0008 0009
09:21:33 Msec=750  True Az=112.995  Ze=-45.39  Az status=0008  Ze status=0009
09:21:33 Check angles
09:21:33 SkyScan query
09:21:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.345<-16423  Statuses=0008 0009
09:21:34 Msec=1500  True Az=112.995  Ze=-66.345  Az status=0008  Ze status=0009
09:21:34 Check angles
09:21:34 SkyScan query
09:21:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.75<-17850  Statuses=0008 0009
09:21:34 Msec=2250  True Az=112.995  Ze=-87.75  Az status=0008  Ze status=0009
09:21:35 Check angles
09:21:35 SkyScan query
09:21:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-109.14<-19276  Statuses=0008 0009
09:21:35 Msec=3000  True Az=112.995  Ze=-109.14  Az status=0008  Ze status=0009
09:21:35 Check angles
09:21:35 SkyScan query
09:21:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-130.545<-20703  Statuses=0008 0009
09:21:36 Msec=3750  True Az=112.995  Ze=-130.545  Az status=0008  Ze status=0009
09:21:36 Check angles
09:21:36 SkyScan query
09:21:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.5<-22100  Statuses=0008 0009
09:21:37 Msec=4500  True Az=112.995  Ze=-151.5  Az status=0008  Ze status=0009
09:21:37 Check angles
09:21:37 SkyScan query
09:21:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.915<-23461  Statuses=0008 0009
09:21:37 Msec=5250  True Az=112.995  Ze=-171.915  Az status=0008  Ze status=0009
09:21:38 Check angles
09:21:38 SkyScan query
09:21:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:21:38 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:21:38 Message to Master queued w/err=0: serial=188952 error=0
09:21:43 Received message from Master: op=Filter serial=188953
09:21:43 Color wheel filter change from 0 to 0
09:21:43 FLIGetFilterPos err=0  currentPosition=0
09:21:43 FLIGetStepsRemaining err=0  RemainingSteps=0
09:21:43 Filter is already there-color wheel unchanged
09:21:43 Received message from Master: op=Shutter serial=188954
09:21:43 Shutter LASER open
09:21:43 Received message from Camera: op=State serial=188956
09:21:43 GetSingleValue result=40  Value=cccccccc
09:21:43 SkyScan query
09:21:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:21:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:21:44 Parameters OK
09:21:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:21:44 Set A/D data flow result=40
09:21:44 Set A/D channel type result=40
09:21:44 Set A/D encoding result=40
09:21:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:21:44 Set channel filter=0.000000e+000  result=40
09:21:44 Config A/D  Result=40
09:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:21:44 Get A/D filter: -9.255963e+061  result=40
09:21:44 Get A/D value=-858993460  result=40
09:21:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:21:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:21:44 Parameters OK
09:21:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:21:44 Set A/D data flow result=40
09:21:44 Set A/D channel type result=40
09:21:44 Set A/D encoding result=40
09:21:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:21:44 Set channel filter=0.000000e+000  result=40
09:21:44 Config A/D  Result=40
09:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:21:44 Get A/D filter: -9.255963e+061  result=40
09:21:44 Get A/D value=-858993460  result=40
09:21:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:21:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:21:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:21:44 Aux=
09:21:44 Message to Camera, serial 188956 queued
09:21:52 Received message from Master: op=Shutter serial=188966
09:21:53 Shutter LASER close
09:21:53 Received message from Master: op=PointingHead serial=188970
09:21:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:21:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:21:53 Point started: ret=0
09:21:53 point_skyscan result=0
09:21:54 Check angles
09:21:54 SkyScan query
09:21:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.725<-21515  Statuses=0008 0009
09:21:55 Msec=0  True Az=112.995  Ze=-142.725  Az status=0008  Ze status=0009
09:21:55 Check angles
09:21:55 SkyScan query
09:21:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.74<-20116  Statuses=0008 0009
09:21:55 Msec=750  True Az=112.995  Ze=-121.74  Az status=0008  Ze status=0009
09:21:56 Check angles
09:21:56 SkyScan query
09:21:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.38<-18692  Statuses=0008 0009
09:21:56 Msec=1500  True Az=112.995  Ze=-100.38  Az status=0008  Ze status=0009
09:21:56 Check angles
09:21:56 SkyScan query
09:21:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.41<-17294  Statuses=0008 0009
09:21:57 Msec=2250  True Az=112.995  Ze=-79.41  Az status=0008  Ze status=0009
09:21:57 Check angles
09:21:57 SkyScan query
09:21:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.44<-15896  Statuses=0008 0009
09:21:58 Msec=3000  True Az=112.995  Ze=-58.44  Az status=0008  Ze status=0009
09:21:58 Check angles
09:21:58 SkyScan query
09:21:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.515<-14501  Statuses=0008 0009
09:21:58 Msec=3750  True Az=112.995  Ze=-37.515  Az status=0008  Ze status=0009
09:21:59 Check angles
09:21:59 SkyScan query
09:21:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.53<-13102  Statuses=0008 0009
09:21:59 Msec=4500  True Az=112.995  Ze=-16.53  Az status=0008  Ze status=0009
09:21:59 Check angles
09:21:59 SkyScan query
09:22:00 SkyScan query done: ret=0  az=112.995<-7533  ze=4.35<-11710  Statuses=0008 0009
09:22:00 Msec=5250  True Az=112.995  Ze=4.35  Az status=0008  Ze status=0009
09:22:00 Check angles
09:22:00 SkyScan query
09:22:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:22:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:22:01 Message to Master queued w/err=0: serial=188970 error=0
09:22:06 Received message from Master: op=Filter serial=188971
09:22:06 Color wheel filter change from 0 to 0
09:22:06 FLIGetFilterPos err=0  currentPosition=0
09:22:06 FLIGetStepsRemaining err=0  RemainingSteps=0
09:22:06 Filter is already there-color wheel unchanged
09:22:06 Received message from Master: op=Shutter serial=188972
09:22:06 Shutter LASER close
09:22:06 Received message from Camera: op=State serial=188974
09:22:06 GetSingleValue result=40  Value=cccccccc
09:22:06 SkyScan query
09:22:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:07 Parameters OK
09:22:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:07 Set A/D data flow result=40
09:22:07 Set A/D channel type result=40
09:22:07 Set A/D encoding result=40
09:22:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:07 Set channel filter=0.000000e+000  result=40
09:22:07 Config A/D  Result=40
09:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:07 Get A/D filter: -9.255963e+061  result=40
09:22:07 Get A/D value=-858993460  result=40
09:22:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:07 Parameters OK
09:22:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:07 Set A/D data flow result=40
09:22:07 Set A/D channel type result=40
09:22:07 Set A/D encoding result=40
09:22:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:07 Set channel filter=0.000000e+000  result=40
09:22:07 Config A/D  Result=40
09:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:07 Get A/D filter: -9.255963e+061  result=40
09:22:07 Get A/D value=-858993460  result=40
09:22:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:22:07 Aux=
09:22:07 Message to Camera, serial 188974 queued
09:22:43 Received message from Master: op=PointingHead serial=188987
09:22:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:22:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:22:44 Point started: ret=0
09:22:44 point_skyscan result=0
09:22:45 Check angles
09:22:45 SkyScan query
09:22:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:22:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:22:45 Message to Master queued w/err=0: serial=188987 error=0
09:22:50 Received message from Master: op=Filter serial=188988
09:22:50 Color wheel filter change from 0 to 0
09:22:50 FLIGetFilterPos err=0  currentPosition=0
09:22:50 FLIGetStepsRemaining err=0  RemainingSteps=0
09:22:50 Filter is already there-color wheel unchanged
09:22:50 Received message from Master: op=Shutter serial=188989
09:22:50 Shutter LASER close
09:22:50 Received message from Camera: op=State serial=188991
09:22:50 GetSingleValue result=40  Value=cccccccc
09:22:50 SkyScan query
09:22:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:22:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:51 Parameters OK
09:22:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:51 Set A/D data flow result=40
09:22:51 Set A/D channel type result=40
09:22:51 Set A/D encoding result=40
09:22:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:51 Set channel filter=0.000000e+000  result=40
09:22:51 Config A/D  Result=40
09:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:51 Get A/D filter: -9.255963e+061  result=40
09:22:51 Get A/D value=-858993460  result=40
09:22:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:22:51 Parameters OK
09:22:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:22:51 Set A/D data flow result=40
09:22:51 Set A/D channel type result=40
09:22:51 Set A/D encoding result=40
09:22:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:22:51 Set channel filter=0.000000e+000  result=40
09:22:51 Config A/D  Result=40
09:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:22:51 Get A/D filter: -9.255963e+061  result=40
09:22:51 Get A/D value=-858993460  result=40
09:22:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:22:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:22:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:22:51 Aux=
09:22:51 Message to Camera, serial 188991 queued
09:23:27 Received message from Master: op=PointingHead serial=189003
09:23:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:23:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:23:27 Point started: ret=0
09:23:27 point_skyscan result=0
09:23:28 Check angles
09:23:28 SkyScan query
09:23:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:23:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:23:28 Message to Master queued w/err=0: serial=189003 error=0
09:23:33 Received message from Master: op=Filter serial=189004
09:23:33 Color wheel filter change from 0 to 0
09:23:33 FLIGetFilterPos err=0  currentPosition=0
09:23:33 FLIGetStepsRemaining err=0  RemainingSteps=0
09:23:33 Filter is already there-color wheel unchanged
09:23:34 Received message from Master: op=Shutter serial=189005
09:23:34 Shutter LASER close
09:23:34 Received message from Camera: op=State serial=189007
09:23:34 GetSingleValue result=40  Value=cccccccc
09:23:34 SkyScan query
09:23:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:23:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:23:34 Parameters OK
09:23:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:23:34 Set A/D data flow result=40
09:23:34 Set A/D channel type result=40
09:23:34 Set A/D encoding result=40
09:23:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:23:34 Set channel filter=0.000000e+000  result=40
09:23:34 Config A/D  Result=40
09:23:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:23:34 Get A/D filter: -9.255963e+061  result=40
09:23:34 Get A/D value=-858993460  result=40
09:23:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:23:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:23:34 Parameters OK
09:23:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:23:34 Set A/D data flow result=40
09:23:34 Set A/D channel type result=40
09:23:34 Set A/D encoding result=40
09:23:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:23:34 Set channel filter=0.000000e+000  result=40
09:23:34 Config A/D  Result=40
09:23:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:23:34 Get A/D filter: -9.255963e+061  result=40
09:23:34 Get A/D value=-858993460  result=40
09:23:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:23:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:23:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:23:34 Aux=
09:23:34 Message to Camera, serial 189007 queued
[UTC 2019-3-9  09:23:48]
09:24:11 Received message from Master: op=PointingHead serial=189020
09:24:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:24:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:24:11 Point started: ret=0
09:24:11 point_skyscan result=0
09:24:12 Check angles
09:24:12 SkyScan query
09:24:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:24:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:24:13 Message to Master queued w/err=0: serial=189020 error=0
09:24:18 Received message from Master: op=Filter serial=189021
09:24:18 Color wheel filter change from 0 to 0
09:24:18 FLIGetFilterPos err=0  currentPosition=0
09:24:18 FLIGetStepsRemaining err=0  RemainingSteps=0
09:24:18 Filter is already there-color wheel unchanged
09:24:18 Received message from Master: op=Shutter serial=189022
09:24:18 Shutter LASER close
09:24:18 Received message from Camera: op=State serial=189024
09:24:18 GetSingleValue result=40  Value=cccccccc
09:24:18 SkyScan query
09:24:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:24:19 Parameters OK
09:24:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:24:19 Set A/D data flow result=40
09:24:19 Set A/D channel type result=40
09:24:19 Set A/D encoding result=40
09:24:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:24:19 Set channel filter=0.000000e+000  result=40
09:24:19 Config A/D  Result=40
09:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:24:19 Get A/D filter: -9.255963e+061  result=40
09:24:19 Get A/D value=-858993460  result=40
09:24:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:24:19 Parameters OK
09:24:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:24:19 Set A/D data flow result=40
09:24:19 Set A/D channel type result=40
09:24:19 Set A/D encoding result=40
09:24:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:24:19 Set channel filter=0.000000e+000  result=40
09:24:19 Config A/D  Result=40
09:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:24:19 Get A/D filter: -9.255963e+061  result=40
09:24:19 Get A/D value=-858993460  result=40
09:24:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:24:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:24:19 Aux=
09:24:19 Message to Camera, serial 189024 queued
09:24:55 Received message from Master: op=PointingHead serial=189037
09:24:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:24:55 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:24:56 Point started: ret=0
09:24:56 point_skyscan result=0
09:24:56 Check angles
09:24:56 SkyScan query
09:24:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
09:24:57 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
09:24:57 Check angles
09:24:57 SkyScan query
09:24:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
09:24:58 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
09:24:58 Check angles
09:24:58 SkyScan query
09:24:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.385<-16359  Statuses=0008 0009
09:24:59 Msec=1500  True Az=112.995  Ze=-65.385  Az status=0008  Ze status=0009
09:24:59 Check angles
09:24:59 SkyScan query
09:24:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.355<-17757  Statuses=0008 0009
09:24:59 Msec=2250  True Az=112.995  Ze=-86.355  Az status=0008  Ze status=0009
09:24:59 Check angles
09:24:59 SkyScan query
09:25:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.31<-19154  Statuses=0008 0009
09:25:00 Msec=3000  True Az=112.995  Ze=-107.31  Az status=0008  Ze status=0009
09:25:00 Check angles
09:25:00 SkyScan query
09:25:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.235<-20549  Statuses=0008 0009
09:25:01 Msec=3750  True Az=112.995  Ze=-128.235  Az status=0008  Ze status=0009
09:25:01 Check angles
09:25:01 SkyScan query
09:25:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.22<-21948  Statuses=0008 0009
09:25:02 Msec=4500  True Az=112.995  Ze=-149.22  Az status=0008  Ze status=0009
09:25:02 Check angles
09:25:02 SkyScan query
09:25:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.145<-23343  Statuses=0008 0009
09:25:02 Msec=5250  True Az=112.995  Ze=-170.145  Az status=0008  Ze status=0009
09:25:02 Check angles
09:25:02 SkyScan query
09:25:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:25:03 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:25:03 Message to Master queued w/err=0: serial=189037 error=0
09:25:08 Received message from Master: op=Filter serial=189038
09:25:08 Color wheel filter change from 0 to 0
09:25:08 FLIGetFilterPos err=0  currentPosition=0
09:25:08 FLIGetStepsRemaining err=0  RemainingSteps=0
09:25:08 Filter is already there-color wheel unchanged
09:25:08 Received message from Master: op=Shutter serial=189039
09:25:08 Shutter LASER open
09:25:08 Received message from Camera: op=State serial=189041
09:25:08 GetSingleValue result=40  Value=cccccccc
09:25:08 SkyScan query
09:25:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:09 Parameters OK
09:25:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:09 Set A/D data flow result=40
09:25:09 Set A/D channel type result=40
09:25:09 Set A/D encoding result=40
09:25:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:09 Set channel filter=0.000000e+000  result=40
09:25:09 Config A/D  Result=40
09:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:09 Get A/D filter: -9.255963e+061  result=40
09:25:09 Get A/D value=-858993460  result=40
09:25:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:09 Parameters OK
09:25:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:09 Set A/D data flow result=40
09:25:09 Set A/D channel type result=40
09:25:09 Set A/D encoding result=40
09:25:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:09 Set channel filter=0.000000e+000  result=40
09:25:09 Config A/D  Result=40
09:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:09 Get A/D filter: -9.255963e+061  result=40
09:25:09 Get A/D value=-858993460  result=40
09:25:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:25:09 Aux=
09:25:09 Message to Camera, serial 189041 queued
09:25:17 Received message from Master: op=Shutter serial=189051
09:25:17 Shutter LASER close
09:25:18 Received message from Master: op=PointingHead serial=189055
09:25:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:25:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:25:18 Point started: ret=0
09:25:18 point_skyscan result=0
09:25:19 Check angles
09:25:19 SkyScan query
09:25:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.085<-21539  Statuses=0008 0009
09:25:20 Msec=0  True Az=112.995  Ze=-143.085  Az status=0008  Ze status=0009
09:25:20 Check angles
09:25:20 SkyScan query
09:25:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.115<-20141  Statuses=0008 0009
09:25:20 Msec=750  True Az=112.995  Ze=-122.115  Az status=0008  Ze status=0009
09:25:21 Check angles
09:25:21 SkyScan query
09:25:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.19<-18746  Statuses=0008 0009
09:25:21 Msec=1500  True Az=112.995  Ze=-101.19  Az status=0008  Ze status=0009
09:25:21 Check angles
09:25:21 SkyScan query
09:25:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.235<-17349  Statuses=0008 0009
09:25:22 Msec=2250  True Az=112.995  Ze=-80.235  Az status=0008  Ze status=0009
09:25:22 Check angles
09:25:22 SkyScan query
09:25:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.28<-15952  Statuses=0008 0009
09:25:23 Msec=3000  True Az=112.995  Ze=-59.28  Az status=0008  Ze status=0009
09:25:23 Check angles
09:25:23 SkyScan query
09:25:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.295<-14553  Statuses=0008 0009
09:25:23 Msec=3750  True Az=112.995  Ze=-38.295  Az status=0008  Ze status=0009
09:25:24 Check angles
09:25:24 SkyScan query
09:25:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.37<-13158  Statuses=0008 0009
09:25:24 Msec=4500  True Az=112.995  Ze=-17.37  Az status=0008  Ze status=0009
09:25:24 Check angles
09:25:24 SkyScan query
09:25:25 SkyScan query done: ret=0  az=112.995<-7533  ze=3.6<-11760  Statuses=0008 0009
09:25:25 Msec=5250  True Az=112.995  Ze=3.6  Az status=0008  Ze status=0009
09:25:25 Check angles
09:25:25 SkyScan query
09:25:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:25:26 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:25:26 Message to Master queued w/err=0: serial=189055 error=0
09:25:31 Received message from Master: op=Filter serial=189056
09:25:31 Color wheel filter change from 0 to 0
09:25:31 FLIGetFilterPos err=0  currentPosition=0
09:25:31 FLIGetStepsRemaining err=0  RemainingSteps=0
09:25:31 Filter is already there-color wheel unchanged
09:25:31 Received message from Master: op=Shutter serial=189057
09:25:31 Shutter LASER close
09:25:31 Received message from Camera: op=State serial=189059
09:25:31 GetSingleValue result=40  Value=cccccccc
09:25:31 SkyScan query
09:25:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:25:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:32 Parameters OK
09:25:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:32 Set A/D data flow result=40
09:25:32 Set A/D channel type result=40
09:25:32 Set A/D encoding result=40
09:25:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:32 Set channel filter=0.000000e+000  result=40
09:25:32 Config A/D  Result=40
09:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:32 Get A/D filter: -9.255963e+061  result=40
09:25:32 Get A/D value=-858993460  result=40
09:25:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:25:32 Parameters OK
09:25:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:25:32 Set A/D data flow result=40
09:25:32 Set A/D channel type result=40
09:25:32 Set A/D encoding result=40
09:25:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:25:32 Set channel filter=0.000000e+000  result=40
09:25:32 Config A/D  Result=40
09:25:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:25:32 Get A/D filter: -9.255963e+061  result=40
09:25:32 Get A/D value=-858993460  result=40
09:25:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:25:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:25:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:25:32 Aux=
09:25:32 Message to Camera, serial 189059 queued
09:26:08 Received message from Master: op=PointingHead serial=189072
09:26:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:26:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:26:09 Point started: ret=0
09:26:09 point_skyscan result=0
09:26:10 Check angles
09:26:10 SkyScan query
09:26:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:26:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:26:10 Message to Master queued w/err=0: serial=189072 error=0
09:26:15 Received message from Master: op=Filter serial=189073
09:26:15 Color wheel filter change from 0 to 0
09:26:15 FLIGetFilterPos err=0  currentPosition=0
09:26:15 FLIGetStepsRemaining err=0  RemainingSteps=0
09:26:15 Filter is already there-color wheel unchanged
09:26:15 Received message from Master: op=Shutter serial=189074
09:26:15 Shutter LASER close
09:26:15 Received message from Camera: op=State serial=189076
09:26:15 GetSingleValue result=40  Value=cccccccc
09:26:15 SkyScan query
09:26:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:26:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:26:16 Parameters OK
09:26:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:26:16 Set A/D data flow result=40
09:26:16 Set A/D channel type result=40
09:26:16 Set A/D encoding result=40
09:26:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:26:16 Set channel filter=0.000000e+000  result=40
09:26:16 Config A/D  Result=40
09:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:26:16 Get A/D filter: -9.255963e+061  result=40
09:26:16 Get A/D value=-858993460  result=40
09:26:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:26:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:26:16 Parameters OK
09:26:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:26:16 Set A/D data flow result=40
09:26:16 Set A/D channel type result=40
09:26:16 Set A/D encoding result=40
09:26:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:26:16 Set channel filter=0.000000e+000  result=40
09:26:16 Config A/D  Result=40
09:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:26:16 Get A/D filter: -9.255963e+061  result=40
09:26:16 Get A/D value=-858993460  result=40
09:26:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:26:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:26:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:26:16 Aux=
09:26:16 Message to Camera, serial 189076 queued
09:26:53 Received message from Master: op=PointingHead serial=189089
09:26:53 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:26:53 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:26:53 Point started: ret=0
09:26:53 point_skyscan result=0
09:26:54 Check angles
09:26:54 SkyScan query
09:26:54 SkyScan query done: ret=0  az=136.395<-9093  ze=-6.51<-12434  Statuses=0009 0008
09:26:54 Msec=0  True Az=136.395  Ze=-6.51  Az status=0009  Ze status=0008
09:26:55 Check angles
09:26:55 SkyScan query
09:26:55 SkyScan query done: ret=0  az=154.005<-10267  ze=-6.495<-12433  Statuses=0009 0008
09:26:55 Msec=750  True Az=154.005  Ze=-6.495  Az status=0009  Ze status=0008
09:26:55 Check angles
09:26:55 SkyScan query
09:26:56 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
09:26:56 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
09:26:56 Check angles
09:26:56 SkyScan query
09:26:57 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:26:57 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:26:57 Message to Master queued w/err=0: serial=189089 error=0
09:27:02 Received message from Master: op=Filter serial=189090
09:27:02 Color wheel filter change from 0 to 0
09:27:02 FLIGetFilterPos err=0  currentPosition=0
09:27:02 FLIGetStepsRemaining err=0  RemainingSteps=0
09:27:02 Filter is already there-color wheel unchanged
09:27:02 Received message from Master: op=Shutter serial=189091
09:27:02 Shutter LASER close
09:27:02 Received message from Camera: op=State serial=189093
09:27:02 GetSingleValue result=40  Value=cccccccc
09:27:02 SkyScan query
09:27:02 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:27:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:02 Parameters OK
09:27:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:02 Set A/D data flow result=40
09:27:02 Set A/D channel type result=40
09:27:02 Set A/D encoding result=40
09:27:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:02 Set channel filter=0.000000e+000  result=40
09:27:02 Config A/D  Result=40
09:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:02 Get A/D filter: -9.255963e+061  result=40
09:27:02 Get A/D value=-858993460  result=40
09:27:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:02 Parameters OK
09:27:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:02 Set A/D data flow result=40
09:27:02 Set A/D channel type result=40
09:27:02 Set A/D encoding result=40
09:27:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:02 Set channel filter=0.000000e+000  result=40
09:27:02 Config A/D  Result=40
09:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:02 Get A/D filter: -9.255963e+061  result=40
09:27:02 Get A/D value=-858993460  result=40
09:27:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:02 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:27:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:27:02 Aux=
09:27:02 Message to Camera, serial 189093 queued
09:27:38 Received message from Master: op=PointingHead serial=189105
09:27:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:27:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:27:39 Point started: ret=0
09:27:39 point_skyscan result=0
09:27:39 Check angles
09:27:39 SkyScan query
09:27:40 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
09:27:40 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
09:27:40 Check angles
09:27:40 SkyScan query
09:27:41 SkyScan query done: ret=0  az=135.705<-9047  ze=6.495<-11567  Statuses=0009 0008
09:27:41 Msec=750  True Az=135.705  Ze=6.495  Az status=0009  Ze status=0008
09:27:41 Check angles
09:27:41 SkyScan query
09:27:42 SkyScan query done: ret=0  az=117.78<-7852  ze=6.495<-11567  Statuses=0009 0008
09:27:42 Msec=1500  True Az=117.78  Ze=6.495  Az status=0009  Ze status=0008
09:27:42 Check angles
09:27:42 SkyScan query
09:27:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:27:42 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:27:42 Message to Master queued w/err=0: serial=189105 error=0
09:27:47 Received message from Master: op=Filter serial=189106
09:27:47 Color wheel filter change from 0 to 0
09:27:47 FLIGetFilterPos err=0  currentPosition=0
09:27:47 FLIGetStepsRemaining err=0  RemainingSteps=0
09:27:47 Filter is already there-color wheel unchanged
09:27:47 Received message from Master: op=Shutter serial=189107
09:27:47 Shutter LASER close
09:27:47 Received message from Camera: op=State serial=189109
09:27:47 GetSingleValue result=40  Value=cccccccc
09:27:47 SkyScan query
09:27:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:27:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:48 Parameters OK
09:27:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:48 Set A/D data flow result=40
09:27:48 Set A/D channel type result=40
09:27:48 Set A/D encoding result=40
09:27:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:48 Set channel filter=0.000000e+000  result=40
09:27:48 Config A/D  Result=40
09:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:48 Get A/D filter: -9.255963e+061  result=40
09:27:48 Get A/D value=-858993460  result=40
09:27:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:27:48 Parameters OK
09:27:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:27:48 Set A/D data flow result=40
09:27:48 Set A/D channel type result=40
09:27:48 Set A/D encoding result=40
09:27:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:27:48 Set channel filter=0.000000e+000  result=40
09:27:48 Config A/D  Result=40
09:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:27:48 Get A/D filter: -9.255963e+061  result=40
09:27:48 Get A/D value=-858993460  result=40
09:27:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:27:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:27:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:27:48 Aux=
09:27:48 Message to Camera, serial 189109 queued
09:28:25 Received message from Master: op=PointingHead serial=189122
09:28:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:28:25 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:28:25 Point started: ret=0
09:28:25 point_skyscan result=0
09:28:26 Check angles
09:28:26 SkyScan query
09:28:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.85<-13590  Statuses=0008 0009
09:28:27 Msec=0  True Az=112.995  Ze=-23.85  Az status=0008  Ze status=0009
09:28:27 Check angles
09:28:27 SkyScan query
09:28:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.805<-14987  Statuses=0008 0009
09:28:27 Msec=750  True Az=112.995  Ze=-44.805  Az status=0008  Ze status=0009
09:28:28 Check angles
09:28:28 SkyScan query
09:28:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.745<-16383  Statuses=0008 0009
09:28:28 Msec=1500  True Az=112.995  Ze=-65.745  Az status=0008  Ze status=0009
09:28:28 Check angles
09:28:28 SkyScan query
09:28:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.7<-17780  Statuses=0008 0009
09:28:29 Msec=2250  True Az=112.995  Ze=-86.7  Az status=0008  Ze status=0009
09:28:29 Check angles
09:28:29 SkyScan query
09:28:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.655<-19177  Statuses=0008 0009
09:28:30 Msec=3000  True Az=112.995  Ze=-107.655  Az status=0008  Ze status=0009
09:28:30 Check angles
09:28:30 SkyScan query
09:28:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.03<-20602  Statuses=0008 0009
09:28:30 Msec=3750  True Az=112.995  Ze=-129.03  Az status=0008  Ze status=0009
09:28:31 Check angles
09:28:31 SkyScan query
09:28:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-150<-22000  Statuses=0008 0009
09:28:31 Msec=4500  True Az=112.995  Ze=-150  Az status=0008  Ze status=0009
09:28:31 Check angles
09:28:31 SkyScan query
09:28:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.865<-23391  Statuses=0008 0009
09:28:32 Msec=5250  True Az=112.995  Ze=-170.865  Az status=0008  Ze status=0009
09:28:32 Check angles
09:28:32 SkyScan query
09:28:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:28:33 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:28:33 Message to Master queued w/err=0: serial=189122 error=0
09:28:38 Received message from Master: op=Filter serial=189123
09:28:38 Color wheel filter change from 0 to 0
09:28:38 FLIGetFilterPos err=0  currentPosition=0
09:28:38 FLIGetStepsRemaining err=0  RemainingSteps=0
09:28:38 Filter is already there-color wheel unchanged
09:28:38 Received message from Master: op=Shutter serial=189124
09:28:38 Shutter LASER open
09:28:38 Received message from Camera: op=State serial=189126
09:28:38 GetSingleValue result=40  Value=cccccccc
09:28:38 SkyScan query
09:28:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:28:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:28:39 Parameters OK
09:28:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:28:39 Set A/D data flow result=40
09:28:39 Set A/D channel type result=40
09:28:39 Set A/D encoding result=40
09:28:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:28:39 Set channel filter=0.000000e+000  result=40
09:28:39 Config A/D  Result=40
09:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:28:39 Get A/D filter: -9.255963e+061  result=40
09:28:39 Get A/D value=-858993460  result=40
09:28:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:28:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:28:39 Parameters OK
09:28:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:28:39 Set A/D data flow result=40
09:28:39 Set A/D channel type result=40
09:28:39 Set A/D encoding result=40
09:28:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:28:39 Set channel filter=0.000000e+000  result=40
09:28:39 Config A/D  Result=40
09:28:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:28:39 Get A/D filter: -9.255963e+061  result=40
09:28:39 Get A/D value=-858993460  result=40
09:28:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:28:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:28:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:28:39 Aux=
09:28:39 Message to Camera, serial 189126 queued
09:28:47 Received message from Master: op=Shutter serial=189136
09:28:47 Shutter LASER close
09:28:47 Received message from Master: op=PointingHead serial=189140
09:28:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:28:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:28:48 Point started: ret=0
09:28:48 point_skyscan result=0
09:28:49 Check angles
09:28:49 SkyScan query
09:28:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
09:28:49 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
09:28:49 Check angles
09:28:49 SkyScan query
09:28:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
09:28:50 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
09:28:50 Check angles
09:28:50 SkyScan query
09:28:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.905<-18727  Statuses=0008 0009
09:28:51 Msec=1500  True Az=112.995  Ze=-100.905  Az status=0008  Ze status=0009
09:28:51 Check angles
09:28:51 SkyScan query
09:28:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.965<-17331  Statuses=0008 0009
09:28:51 Msec=2250  True Az=112.995  Ze=-79.965  Az status=0008  Ze status=0009
09:28:52 Check angles
09:28:52 SkyScan query
09:28:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.025<-15935  Statuses=0008 0009
09:28:52 Msec=3000  True Az=112.995  Ze=-59.025  Az status=0008  Ze status=0009
09:28:52 Check angles
09:28:52 SkyScan query
09:28:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.62<-14508  Statuses=0008 0009
09:28:53 Msec=3750  True Az=112.995  Ze=-37.62  Az status=0008  Ze status=0009
09:28:53 Check angles
09:28:53 SkyScan query
09:28:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.635<-13109  Statuses=0008 0009
09:28:54 Msec=4500  True Az=112.995  Ze=-16.635  Az status=0008  Ze status=0009
09:28:54 Check angles
09:28:54 SkyScan query
09:28:54 SkyScan query done: ret=0  az=112.995<-7533  ze=4.26<-11716  Statuses=0008 0009
09:28:54 Msec=5250  True Az=112.995  Ze=4.26  Az status=0008  Ze status=0009
09:28:55 Check angles
09:28:55 SkyScan query
09:28:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:28:55 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:28:55 Message to Master queued w/err=0: serial=189140 error=0
09:29:00 Received message from Master: op=Filter serial=189141
09:29:00 Color wheel filter change from 0 to 0
09:29:00 FLIGetFilterPos err=0  currentPosition=0
09:29:00 FLIGetStepsRemaining err=0  RemainingSteps=0
09:29:00 Filter is already there-color wheel unchanged
09:29:00 Received message from Master: op=Shutter serial=189142
09:29:00 Shutter LASER close
09:29:00 Received message from Camera: op=State serial=189144
09:29:00 GetSingleValue result=40  Value=cccccccc
09:29:00 SkyScan query
09:29:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:29:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:01 Parameters OK
09:29:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:01 Set A/D data flow result=40
09:29:01 Set A/D channel type result=40
09:29:01 Set A/D encoding result=40
09:29:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:01 Set channel filter=0.000000e+000  result=40
09:29:01 Config A/D  Result=40
09:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:01 Get A/D filter: -9.255963e+061  result=40
09:29:01 Get A/D value=-858993460  result=40
09:29:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:01 Parameters OK
09:29:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:01 Set A/D data flow result=40
09:29:01 Set A/D channel type result=40
09:29:01 Set A/D encoding result=40
09:29:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:01 Set channel filter=0.000000e+000  result=40
09:29:01 Config A/D  Result=40
09:29:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:01 Get A/D filter: -9.255963e+061  result=40
09:29:01 Get A/D value=-858993460  result=40
09:29:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:29:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:29:01 Aux=
09:29:01 Message to Camera, serial 189144 queued
09:29:38 Received message from Master: op=PointingHead serial=189157
09:29:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:29:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:29:38 Point started: ret=0
09:29:38 point_skyscan result=0
09:29:39 Check angles
09:29:39 SkyScan query
09:29:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:29:40 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:29:40 Message to Master queued w/err=0: serial=189157 error=0
09:29:45 Received message from Master: op=Filter serial=189158
09:29:45 Color wheel filter change from 0 to 0
09:29:45 FLIGetFilterPos err=0  currentPosition=0
09:29:45 FLIGetStepsRemaining err=0  RemainingSteps=0
09:29:45 Filter is already there-color wheel unchanged
09:29:45 Received message from Master: op=Shutter serial=189159
09:29:45 Shutter LASER close
09:29:45 Received message from Camera: op=State serial=189161
09:29:45 GetSingleValue result=40  Value=cccccccc
09:29:45 SkyScan query
09:29:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:45 Parameters OK
09:29:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:45 Set A/D data flow result=40
09:29:45 Set A/D channel type result=40
09:29:45 Set A/D encoding result=40
09:29:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:45 Set channel filter=0.000000e+000  result=40
09:29:45 Config A/D  Result=40
09:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:45 Get A/D filter: -9.255963e+061  result=40
09:29:45 Get A/D value=-858993460  result=40
09:29:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:29:45 Parameters OK
09:29:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:29:45 Set A/D data flow result=40
09:29:45 Set A/D channel type result=40
09:29:45 Set A/D encoding result=40
09:29:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:29:45 Set channel filter=0.000000e+000  result=40
09:29:45 Config A/D  Result=40
09:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:29:45 Get A/D filter: -9.255963e+061  result=40
09:29:45 Get A/D value=-858993460  result=40
09:29:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:29:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:29:45 Aux=
09:29:45 Message to Camera, serial 189161 queued
09:30:22 Received message from Master: op=PointingHead serial=189174
09:30:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:30:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:30:23 Point started: ret=0
09:30:23 point_skyscan result=0
09:30:23 Check angles
09:30:23 SkyScan query
09:30:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:30:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:30:24 Message to Master queued w/err=0: serial=189174 error=0
09:30:29 Received message from Master: op=Filter serial=189175
09:30:29 Color wheel filter change from 0 to 0
09:30:29 FLIGetFilterPos err=0  currentPosition=0
09:30:29 FLIGetStepsRemaining err=0  RemainingSteps=0
09:30:29 Filter is already there-color wheel unchanged
09:30:29 Received message from Master: op=Shutter serial=189176
09:30:29 Shutter LASER close
09:30:29 Received message from Camera: op=State serial=189178
09:30:29 GetSingleValue result=40  Value=cccccccc
09:30:29 SkyScan query
09:30:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:30:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:30:30 Parameters OK
09:30:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:30:30 Set A/D data flow result=40
09:30:30 Set A/D channel type result=40
09:30:30 Set A/D encoding result=40
09:30:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:30:30 Set channel filter=0.000000e+000  result=40
09:30:30 Config A/D  Result=40
09:30:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:30:30 Get A/D filter: -9.255963e+061  result=40
09:30:30 Get A/D value=-858993460  result=40
09:30:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:30:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:30:30 Parameters OK
09:30:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:30:30 Set A/D data flow result=40
09:30:30 Set A/D channel type result=40
09:30:30 Set A/D encoding result=40
09:30:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:30:30 Set channel filter=0.000000e+000  result=40
09:30:30 Config A/D  Result=40
09:30:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:30:30 Get A/D filter: -9.255963e+061  result=40
09:30:30 Get A/D value=-858993460  result=40
09:30:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:30:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:30:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:30:30 Aux=
09:30:30 Message to Camera, serial 189178 queued
09:31:06 Received message from Master: op=PointingHead serial=189191
09:31:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:31:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:31:07 Point started: ret=0
09:31:07 point_skyscan result=0
09:31:08 Check angles
09:31:08 SkyScan query
09:31:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:31:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:31:08 Message to Master queued w/err=0: serial=189191 error=0
09:31:13 Received message from Master: op=Filter serial=189192
09:31:13 Color wheel filter change from 0 to 0
09:31:13 FLIGetFilterPos err=0  currentPosition=0
09:31:13 FLIGetStepsRemaining err=0  RemainingSteps=0
09:31:13 Filter is already there-color wheel unchanged
09:31:13 Received message from Master: op=Shutter serial=189193
09:31:13 Shutter LASER close
09:31:13 Received message from Camera: op=State serial=189195
09:31:13 GetSingleValue result=40  Value=cccccccc
09:31:13 SkyScan query
09:31:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:31:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:31:14 Parameters OK
09:31:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:31:14 Set A/D data flow result=40
09:31:14 Set A/D channel type result=40
09:31:14 Set A/D encoding result=40
09:31:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:31:14 Set channel filter=0.000000e+000  result=40
09:31:14 Config A/D  Result=40
09:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:31:14 Get A/D filter: -9.255963e+061  result=40
09:31:14 Get A/D value=-858993460  result=40
09:31:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:31:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:31:14 Parameters OK
09:31:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:31:14 Set A/D data flow result=40
09:31:14 Set A/D channel type result=40
09:31:14 Set A/D encoding result=40
09:31:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:31:14 Set channel filter=0.000000e+000  result=40
09:31:14 Config A/D  Result=40
09:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:31:14 Get A/D filter: -9.255963e+061  result=40
09:31:14 Get A/D value=-858993460  result=40
09:31:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:31:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:31:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:31:14 Aux=
09:31:14 Message to Camera, serial 189195 queued
09:31:51 Received message from Master: op=PointingHead serial=189208
09:31:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:31:51 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:31:51 Point started: ret=0
09:31:51 point_skyscan result=0
09:31:52 Check angles
09:31:52 SkyScan query
09:31:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
09:31:52 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
09:31:53 Check angles
09:31:53 SkyScan query
09:31:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.07<-14938  Statuses=0008 0009
09:31:53 Msec=750  True Az=112.995  Ze=-44.07  Az status=0008  Ze status=0009
09:31:53 Check angles
09:31:53 SkyScan query
09:31:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.025<-16335  Statuses=0008 0009
09:31:54 Msec=1500  True Az=112.995  Ze=-65.025  Az status=0008  Ze status=0009
09:31:54 Check angles
09:31:54 SkyScan query
09:31:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.98<-17732  Statuses=0008 0009
09:31:55 Msec=2250  True Az=112.995  Ze=-85.98  Az status=0008  Ze status=0009
09:31:55 Check angles
09:31:55 SkyScan query
09:31:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.935<-19129  Statuses=0008 0009
09:31:55 Msec=3000  True Az=112.995  Ze=-106.935  Az status=0008  Ze status=0009
09:31:56 Check angles
09:31:56 SkyScan query
09:31:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.89<-20526  Statuses=0008 0009
09:31:56 Msec=3750  True Az=112.995  Ze=-127.89  Az status=0008  Ze status=0009
09:31:56 Check angles
09:31:56 SkyScan query
09:31:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.845<-21923  Statuses=0008 0009
09:31:57 Msec=4500  True Az=112.995  Ze=-148.845  Az status=0008  Ze status=0009
09:31:57 Check angles
09:31:57 SkyScan query
09:31:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.77<-23318  Statuses=0008 0009
09:31:58 Msec=5250  True Az=112.995  Ze=-169.77  Az status=0008  Ze status=0009
09:31:58 Check angles
09:31:58 SkyScan query
09:31:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:31:58 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:31:58 Message to Master queued w/err=0: serial=189208 error=0
09:32:03 Received message from Master: op=Filter serial=189209
09:32:03 Color wheel filter change from 0 to 0
09:32:03 FLIGetFilterPos err=0  currentPosition=0
09:32:03 FLIGetStepsRemaining err=0  RemainingSteps=0
09:32:03 Filter is already there-color wheel unchanged
09:32:04 Received message from Master: op=Shutter serial=189210
09:32:04 Shutter LASER open
09:32:04 Received message from Camera: op=State serial=189212
09:32:04 GetSingleValue result=40  Value=cccccccc
09:32:04 SkyScan query
09:32:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:32:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:04 Parameters OK
09:32:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:04 Set A/D data flow result=40
09:32:04 Set A/D channel type result=40
09:32:04 Set A/D encoding result=40
09:32:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:04 Set channel filter=0.000000e+000  result=40
09:32:04 Config A/D  Result=40
09:32:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:04 Get A/D filter: -9.255963e+061  result=40
09:32:04 Get A/D value=-858993460  result=40
09:32:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:04 Parameters OK
09:32:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:04 Set A/D data flow result=40
09:32:04 Set A/D channel type result=40
09:32:04 Set A/D encoding result=40
09:32:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:04 Set channel filter=0.000000e+000  result=40
09:32:04 Config A/D  Result=40
09:32:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:04 Get A/D filter: -9.255963e+061  result=40
09:32:04 Get A/D value=-858993460  result=40
09:32:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:32:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:32:04 Aux=
09:32:04 Message to Camera, serial 189212 queued
09:32:12 Received message from Master: op=Shutter serial=189221
09:32:12 Shutter LASER close
09:32:12 Received message from Master: op=PointingHead serial=189225
09:32:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:32:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:32:13 Point started: ret=0
09:32:13 point_skyscan result=0
09:32:14 Check angles
09:32:14 SkyScan query
09:32:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
09:32:14 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
09:32:14 Check angles
09:32:14 SkyScan query
09:32:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.995<-20133  Statuses=0008 0009
09:32:15 Msec=750  True Az=112.995  Ze=-121.995  Az status=0008  Ze status=0009
09:32:15 Check angles
09:32:15 SkyScan query
09:32:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.07<-18738  Statuses=0008 0009
09:32:16 Msec=1500  True Az=112.995  Ze=-101.07  Az status=0008  Ze status=0009
09:32:16 Check angles
09:32:16 SkyScan query
09:32:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
09:32:16 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
09:32:17 Check angles
09:32:17 SkyScan query
09:32:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.725<-15915  Statuses=0008 0009
09:32:17 Msec=3000  True Az=112.995  Ze=-58.725  Az status=0008  Ze status=0009
09:32:17 Check angles
09:32:17 SkyScan query
09:32:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.77<-14518  Statuses=0008 0009
09:32:18 Msec=3750  True Az=112.995  Ze=-37.77  Az status=0008  Ze status=0009
09:32:18 Check angles
09:32:18 SkyScan query
09:32:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.8<-13120  Statuses=0008 0009
09:32:19 Msec=4500  True Az=112.995  Ze=-16.8  Az status=0008  Ze status=0009
09:32:19 Check angles
09:32:19 SkyScan query
09:32:19 SkyScan query done: ret=0  az=112.995<-7533  ze=4.485<-11701  Statuses=0008 0009
09:32:19 Msec=5250  True Az=112.995  Ze=4.485  Az status=0008  Ze status=0009
09:32:20 Check angles
09:32:20 SkyScan query
09:32:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:32:20 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:32:20 Message to Master queued w/err=0: serial=189225 error=0
09:32:25 Received message from Master: op=Filter serial=189226
09:32:25 Color wheel filter change from 0 to 0
09:32:25 FLIGetFilterPos err=0  currentPosition=0
09:32:25 FLIGetStepsRemaining err=0  RemainingSteps=0
09:32:25 Filter is already there-color wheel unchanged
09:32:25 Received message from Master: op=Shutter serial=189227
09:32:25 Shutter LASER close
09:32:25 Received message from Camera: op=State serial=189229
09:32:25 GetSingleValue result=40  Value=cccccccc
09:32:25 SkyScan query
09:32:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:32:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:26 Parameters OK
09:32:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:26 Set A/D data flow result=40
09:32:26 Set A/D channel type result=40
09:32:26 Set A/D encoding result=40
09:32:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:26 Set channel filter=0.000000e+000  result=40
09:32:26 Config A/D  Result=40
09:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:26 Get A/D filter: -9.255963e+061  result=40
09:32:26 Get A/D value=-858993460  result=40
09:32:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:32:26 Parameters OK
09:32:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:32:26 Set A/D data flow result=40
09:32:26 Set A/D channel type result=40
09:32:26 Set A/D encoding result=40
09:32:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:32:26 Set channel filter=0.000000e+000  result=40
09:32:26 Config A/D  Result=40
09:32:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:32:26 Get A/D filter: -9.255963e+061  result=40
09:32:26 Get A/D value=-858993460  result=40
09:32:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:32:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:32:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:32:26 Aux=
09:32:26 Message to Camera, serial 189229 queued
09:33:03 Received message from Master: op=PointingHead serial=189242
09:33:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:33:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:33:03 Point started: ret=0
09:33:03 point_skyscan result=0
09:33:04 Check angles
09:33:04 SkyScan query
09:33:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:33:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:33:05 Message to Master queued w/err=0: serial=189242 error=0
09:33:10 Received message from Master: op=Filter serial=189243
09:33:10 Color wheel filter change from 0 to 0
09:33:10 FLIGetFilterPos err=0  currentPosition=0
09:33:10 FLIGetStepsRemaining err=0  RemainingSteps=0
09:33:10 Filter is already there-color wheel unchanged
09:33:10 Received message from Master: op=Shutter serial=189244
09:33:10 Shutter LASER close
09:33:10 Received message from Camera: op=State serial=189246
09:33:10 GetSingleValue result=40  Value=cccccccc
09:33:10 SkyScan query
09:33:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:33:10 Parameters OK
09:33:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:33:10 Set A/D data flow result=40
09:33:10 Set A/D channel type result=40
09:33:10 Set A/D encoding result=40
09:33:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:33:10 Set channel filter=0.000000e+000  result=40
09:33:10 Config A/D  Result=40
09:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:33:10 Get A/D filter: -9.255963e+061  result=40
09:33:10 Get A/D value=-858993460  result=40
09:33:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:33:10 Parameters OK
09:33:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:33:10 Set A/D data flow result=40
09:33:10 Set A/D channel type result=40
09:33:10 Set A/D encoding result=40
09:33:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:33:10 Set channel filter=0.000000e+000  result=40
09:33:10 Config A/D  Result=40
09:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:33:10 Get A/D filter: -9.255963e+061  result=40
09:33:10 Get A/D value=-858993460  result=40
09:33:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:33:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:33:10 Aux=
09:33:10 Message to Camera, serial 189246 queued
09:33:36 Received message from Master: op=Identify serial=189247
09:33:47 Received message from Master: op=PointingHead serial=189262
09:33:47 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:33:47 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:33:47 Point started: ret=0
09:33:47 point_skyscan result=0
09:33:48 Check angles
09:33:48 SkyScan query
09:33:49 SkyScan query done: ret=0  az=136.005<-9067  ze=-6.51<-12434  Statuses=0009 0008
09:33:49 Msec=0  True Az=136.005  Ze=-6.51  Az status=0009  Ze status=0008
09:33:49 Check angles
09:33:49 SkyScan query
09:33:50 SkyScan query done: ret=0  az=153.93<-10262  ze=-6.495<-12433  Statuses=0009 0008
09:33:50 Msec=750  True Az=153.93  Ze=-6.495  Az status=0009  Ze status=0008
09:33:50 Check angles
09:33:50 SkyScan query
09:33:50 SkyScan query done: ret=0  az=171.66<-11444  ze=-6.495<-12433  Statuses=0009 0008
09:33:50 Msec=1500  True Az=171.66  Ze=-6.495  Az status=0009  Ze status=0008
09:33:51 Check angles
09:33:51 SkyScan query
09:33:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:33:51 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:33:51 Message to Master queued w/err=0: serial=189262 error=0
09:33:56 Received message from Master: op=Filter serial=189263
09:33:56 Color wheel filter change from 0 to 0
09:33:56 FLIGetFilterPos err=0  currentPosition=0
09:33:56 FLIGetStepsRemaining err=0  RemainingSteps=0
09:33:56 Filter is already there-color wheel unchanged
09:33:56 Received message from Master: op=Shutter serial=189264
09:33:56 Shutter LASER close
09:33:56 Received message from Camera: op=State serial=189266
09:33:56 GetSingleValue result=40  Value=cccccccc
09:33:56 SkyScan query
09:33:57 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:33:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:33:57 Parameters OK
09:33:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:33:57 Set A/D data flow result=40
09:33:57 Set A/D channel type result=40
09:33:57 Set A/D encoding result=40
09:33:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:33:57 Set channel filter=0.000000e+000  result=40
09:33:57 Config A/D  Result=40
09:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:33:57 Get A/D filter: -9.255963e+061  result=40
09:33:57 Get A/D value=-858993460  result=40
09:33:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:33:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:33:57 Parameters OK
09:33:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:33:57 Set A/D data flow result=40
09:33:57 Set A/D channel type result=40
09:33:57 Set A/D encoding result=40
09:33:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:33:57 Set channel filter=0.000000e+000  result=40
09:33:57 Config A/D  Result=40
09:33:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:33:57 Get A/D filter: -9.255963e+061  result=40
09:33:57 Get A/D value=-858993460  result=40
09:33:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:33:57 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:33:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:33:57 Aux=
[UTC 2019-3-9  09:33:57]
09:33:57 Message to Camera, serial 189266 queued
09:34:34 Received message from Master: op=PointingHead serial=189279
09:34:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:34:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:34:34 Point started: ret=0
09:34:34 point_skyscan result=0
09:34:35 Check angles
09:34:35 SkyScan query
09:34:35 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
09:34:35 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
09:34:36 Check angles
09:34:36 SkyScan query
09:34:36 SkyScan query done: ret=0  az=135.285<-9019  ze=6.495<-11567  Statuses=0009 0008
09:34:36 Msec=750  True Az=135.285  Ze=6.495  Az status=0009  Ze status=0008
09:34:36 Check angles
09:34:36 SkyScan query
09:34:37 SkyScan query done: ret=0  az=118.005<-7867  ze=6.495<-11567  Statuses=0009 0008
09:34:37 Msec=1500  True Az=118.005  Ze=6.495  Az status=0009  Ze status=0008
09:34:37 Check angles
09:34:37 SkyScan query
09:34:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:34:38 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:34:38 Message to Master queued w/err=0: serial=189279 error=0
09:34:43 Received message from Master: op=Filter serial=189280
09:34:43 Color wheel filter change from 0 to 0
09:34:43 FLIGetFilterPos err=0  currentPosition=0
09:34:43 FLIGetStepsRemaining err=0  RemainingSteps=0
09:34:43 Filter is already there-color wheel unchanged
09:34:43 Received message from Master: op=Shutter serial=189281
09:34:43 Shutter LASER close
09:34:43 Received message from Camera: op=State serial=189283
09:34:43 GetSingleValue result=40  Value=cccccccc
09:34:43 SkyScan query
09:34:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:34:43 Parameters OK
09:34:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:34:43 Set A/D data flow result=40
09:34:43 Set A/D channel type result=40
09:34:43 Set A/D encoding result=40
09:34:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:34:43 Set channel filter=0.000000e+000  result=40
09:34:43 Config A/D  Result=40
09:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:34:43 Get A/D filter: -9.255963e+061  result=40
09:34:43 Get A/D value=-858993460  result=40
09:34:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:34:43 Parameters OK
09:34:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:34:43 Set A/D data flow result=40
09:34:43 Set A/D channel type result=40
09:34:43 Set A/D encoding result=40
09:34:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:34:43 Set channel filter=0.000000e+000  result=40
09:34:43 Config A/D  Result=40
09:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:34:43 Get A/D filter: -9.255963e+061  result=40
09:34:43 Get A/D value=-858993460  result=40
09:34:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:34:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:34:43 Aux=
09:34:43 Message to Camera, serial 189283 queued
09:35:20 Received message from Master: op=PointingHead serial=189296
09:35:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:35:20 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:35:21 Point started: ret=0
09:35:21 point_skyscan result=0
09:35:21 Check angles
09:35:21 SkyScan query
09:35:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
09:35:22 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
09:35:22 Check angles
09:35:22 SkyScan query
09:35:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
09:35:23 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
09:35:23 Check angles
09:35:23 SkyScan query
09:35:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.385<-16359  Statuses=0008 0009
09:35:23 Msec=1500  True Az=112.995  Ze=-65.385  Az status=0008  Ze status=0009
09:35:24 Check angles
09:35:24 SkyScan query
09:35:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.34<-17756  Statuses=0008 0009
09:35:24 Msec=2250  True Az=112.995  Ze=-86.34  Az status=0008  Ze status=0009
09:35:24 Check angles
09:35:24 SkyScan query
09:35:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.295<-19153  Statuses=0008 0009
09:35:25 Msec=3000  True Az=112.995  Ze=-107.295  Az status=0008  Ze status=0009
09:35:25 Check angles
09:35:25 SkyScan query
09:35:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.235<-20549  Statuses=0008 0009
09:35:26 Msec=3750  True Az=112.995  Ze=-128.235  Az status=0008  Ze status=0009
09:35:26 Check angles
09:35:26 SkyScan query
09:35:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.205<-21947  Statuses=0008 0009
09:35:26 Msec=4500  True Az=112.995  Ze=-149.205  Az status=0008  Ze status=0009
09:35:27 Check angles
09:35:27 SkyScan query
09:35:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.16<-23344  Statuses=0008 0009
09:35:27 Msec=5250  True Az=112.995  Ze=-170.16  Az status=0008  Ze status=0009
09:35:27 Check angles
09:35:27 SkyScan query
09:35:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:35:28 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:35:28 Message to Master queued w/err=0: serial=189296 error=0
09:35:33 Received message from Master: op=Filter serial=189297
09:35:33 Color wheel filter change from 0 to 0
09:35:33 FLIGetFilterPos err=0  currentPosition=0
09:35:33 FLIGetStepsRemaining err=0  RemainingSteps=0
09:35:33 Filter is already there-color wheel unchanged
09:35:33 Received message from Master: op=Shutter serial=189298
09:35:33 Shutter LASER open
09:35:33 Received message from Camera: op=State serial=189300
09:35:33 GetSingleValue result=40  Value=cccccccc
09:35:33 SkyScan query
09:35:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:35:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:35:34 Parameters OK
09:35:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:35:34 Set A/D data flow result=40
09:35:34 Set A/D channel type result=40
09:35:34 Set A/D encoding result=40
09:35:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:35:34 Set channel filter=0.000000e+000  result=40
09:35:34 Config A/D  Result=40
09:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:35:34 Get A/D filter: -9.255963e+061  result=40
09:35:34 Get A/D value=-858993460  result=40
09:35:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:35:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:35:34 Parameters OK
09:35:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:35:34 Set A/D data flow result=40
09:35:34 Set A/D channel type result=40
09:35:34 Set A/D encoding result=40
09:35:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:35:34 Set channel filter=0.000000e+000  result=40
09:35:34 Config A/D  Result=40
09:35:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:35:34 Get A/D filter: -9.255963e+061  result=40
09:35:34 Get A/D value=-858993460  result=40
09:35:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:35:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:35:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:35:34 Aux=
09:35:34 Message to Camera, serial 189300 queued
09:35:42 Received message from Master: op=Shutter serial=189310
09:35:42 Shutter LASER close
09:35:43 Received message from Master: op=PointingHead serial=189314
09:35:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:35:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:35:43 Point started: ret=0
09:35:43 point_skyscan result=0
09:35:44 Check angles
09:35:44 SkyScan query
09:35:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.92<-21528  Statuses=0008 0009
09:35:44 Msec=0  True Az=112.995  Ze=-142.92  Az status=0008  Ze status=0009
09:35:45 Check angles
09:35:45 SkyScan query
09:35:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
09:35:45 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
09:35:45 Check angles
09:35:45 SkyScan query
09:35:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.025<-18735  Statuses=0008 0009
09:35:46 Msec=1500  True Az=112.995  Ze=-101.025  Az status=0008  Ze status=0009
09:35:46 Check angles
09:35:46 SkyScan query
09:35:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.085<-17339  Statuses=0008 0009
09:35:47 Msec=2250  True Az=112.995  Ze=-80.085  Az status=0008  Ze status=0009
09:35:47 Check angles
09:35:47 SkyScan query
09:35:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.13<-15942  Statuses=0008 0009
09:35:47 Msec=3000  True Az=112.995  Ze=-59.13  Az status=0008  Ze status=0009
09:35:48 Check angles
09:35:48 SkyScan query
09:35:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.115<-14541  Statuses=0008 0009
09:35:48 Msec=3750  True Az=112.995  Ze=-38.115  Az status=0008  Ze status=0009
09:35:48 Check angles
09:35:48 SkyScan query
09:35:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
09:35:49 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
09:35:49 Check angles
09:35:49 SkyScan query
09:35:50 SkyScan query done: ret=0  az=112.995<-7533  ze=3.765<-11749  Statuses=0008 0009
09:35:50 Msec=5250  True Az=112.995  Ze=3.765  Az status=0008  Ze status=0009
09:35:50 Check angles
09:35:50 SkyScan query
09:35:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:35:50 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:35:50 Message to Master queued w/err=0: serial=189314 error=0
09:35:55 Received message from Master: op=Filter serial=189315
09:35:55 Color wheel filter change from 0 to 0
09:35:55 FLIGetFilterPos err=0  currentPosition=0
09:35:55 FLIGetStepsRemaining err=0  RemainingSteps=0
09:35:55 Filter is already there-color wheel unchanged
09:35:56 Received message from Master: op=Shutter serial=189316
09:35:56 Shutter LASER close
09:35:56 Received message from Camera: op=State serial=189318
09:35:56 GetSingleValue result=40  Value=cccccccc
09:35:56 SkyScan query
09:35:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:35:56 Parameters OK
09:35:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:35:56 Set A/D data flow result=40
09:35:56 Set A/D channel type result=40
09:35:56 Set A/D encoding result=40
09:35:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:35:56 Set channel filter=0.000000e+000  result=40
09:35:56 Config A/D  Result=40
09:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:35:56 Get A/D filter: -9.255963e+061  result=40
09:35:56 Get A/D value=-858993460  result=40
09:35:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:35:56 Parameters OK
09:35:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:35:56 Set A/D data flow result=40
09:35:56 Set A/D channel type result=40
09:35:56 Set A/D encoding result=40
09:35:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:35:56 Set channel filter=0.000000e+000  result=40
09:35:56 Config A/D  Result=40
09:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:35:56 Get A/D filter: -9.255963e+061  result=40
09:35:56 Get A/D value=-858993460  result=40
09:35:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:35:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:35:56 Aux=
09:35:56 Message to Camera, serial 189318 queued
09:36:33 Received message from Master: op=PointingHead serial=189331
09:36:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:36:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:36:34 Point started: ret=0
09:36:34 point_skyscan result=0
09:36:34 Check angles
09:36:34 SkyScan query
09:36:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:36:35 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:36:35 Message to Master queued w/err=0: serial=189331 error=0
09:36:40 Received message from Master: op=Filter serial=189332
09:36:40 Color wheel filter change from 0 to 0
09:36:40 FLIGetFilterPos err=0  currentPosition=0
09:36:40 FLIGetStepsRemaining err=0  RemainingSteps=0
09:36:40 Filter is already there-color wheel unchanged
09:36:40 Received message from Master: op=Shutter serial=189333
09:36:40 Shutter LASER close
09:36:40 Received message from Camera: op=State serial=189335
09:36:40 GetSingleValue result=40  Value=cccccccc
09:36:40 SkyScan query
09:36:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:36:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:36:41 Parameters OK
09:36:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:36:41 Set A/D data flow result=40
09:36:41 Set A/D channel type result=40
09:36:41 Set A/D encoding result=40
09:36:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:36:41 Set channel filter=0.000000e+000  result=40
09:36:41 Config A/D  Result=40
09:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:36:41 Get A/D filter: -9.255963e+061  result=40
09:36:41 Get A/D value=-858993460  result=40
09:36:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:36:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:36:41 Parameters OK
09:36:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:36:41 Set A/D data flow result=40
09:36:41 Set A/D channel type result=40
09:36:41 Set A/D encoding result=40
09:36:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:36:41 Set channel filter=0.000000e+000  result=40
09:36:41 Config A/D  Result=40
09:36:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:36:41 Get A/D filter: -9.255963e+061  result=40
09:36:41 Get A/D value=-858993460  result=40
09:36:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:36:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:36:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:36:41 Aux=
09:36:41 Message to Camera, serial 189335 queued
09:37:18 Received message from Master: op=PointingHead serial=189348
09:37:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:37:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:37:18 Point started: ret=0
09:37:18 point_skyscan result=0
09:37:19 Check angles
09:37:19 SkyScan query
09:37:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:37:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:37:19 Message to Master queued w/err=0: serial=189348 error=0
09:37:24 Received message from Master: op=Filter serial=189349
09:37:24 Color wheel filter change from 0 to 0
09:37:24 FLIGetFilterPos err=0  currentPosition=0
09:37:24 FLIGetStepsRemaining err=0  RemainingSteps=0
09:37:24 Filter is already there-color wheel unchanged
09:37:24 Received message from Master: op=Shutter serial=189350
09:37:24 Shutter LASER close
09:37:24 Received message from Camera: op=State serial=189352
09:37:24 GetSingleValue result=40  Value=cccccccc
09:37:24 SkyScan query
09:37:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:37:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:37:25 Parameters OK
09:37:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:37:25 Set A/D data flow result=40
09:37:25 Set A/D channel type result=40
09:37:25 Set A/D encoding result=40
09:37:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:37:25 Set channel filter=0.000000e+000  result=40
09:37:25 Config A/D  Result=40
09:37:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:37:25 Get A/D filter: -9.255963e+061  result=40
09:37:25 Get A/D value=-858993460  result=40
09:37:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:37:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:37:25 Parameters OK
09:37:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:37:25 Set A/D data flow result=40
09:37:25 Set A/D channel type result=40
09:37:25 Set A/D encoding result=40
09:37:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:37:25 Set channel filter=0.000000e+000  result=40
09:37:25 Config A/D  Result=40
09:37:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:37:25 Get A/D filter: -9.255963e+061  result=40
09:37:25 Get A/D value=-858993460  result=40
09:37:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:37:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:37:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:37:25 Aux=
09:37:25 Message to Camera, serial 189352 queued
09:38:02 Received message from Master: op=PointingHead serial=189365
09:38:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:38:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:38:02 Point started: ret=0
09:38:02 point_skyscan result=0
09:38:03 Check angles
09:38:03 SkyScan query
09:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:38:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:38:04 Message to Master queued w/err=0: serial=189365 error=0
09:38:09 Received message from Master: op=Filter serial=189366
09:38:09 Color wheel filter change from 0 to 0
09:38:09 FLIGetFilterPos err=0  currentPosition=0
09:38:09 FLIGetStepsRemaining err=0  RemainingSteps=0
09:38:09 Filter is already there-color wheel unchanged
09:38:09 Received message from Master: op=Shutter serial=189367
09:38:09 Shutter LASER close
09:38:09 Received message from Camera: op=State serial=189369
09:38:09 GetSingleValue result=40  Value=cccccccc
09:38:09 SkyScan query
09:38:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:38:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:38:09 Parameters OK
09:38:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:38:09 Set A/D data flow result=40
09:38:09 Set A/D channel type result=40
09:38:09 Set A/D encoding result=40
09:38:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:38:09 Set channel filter=0.000000e+000  result=40
09:38:09 Config A/D  Result=40
09:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:38:09 Get A/D filter: -9.255963e+061  result=40
09:38:09 Get A/D value=-858993460  result=40
09:38:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:38:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:38:09 Parameters OK
09:38:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:38:09 Set A/D data flow result=40
09:38:09 Set A/D channel type result=40
09:38:09 Set A/D encoding result=40
09:38:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:38:09 Set channel filter=0.000000e+000  result=40
09:38:09 Config A/D  Result=40
09:38:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:38:09 Get A/D filter: -9.255963e+061  result=40
09:38:09 Get A/D value=-858993460  result=40
09:38:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:38:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:38:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:38:09 Aux=
09:38:09 Message to Camera, serial 189369 queued
09:38:46 Received message from Master: op=PointingHead serial=189382
09:38:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:38:46 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:38:46 Point started: ret=0
09:38:46 point_skyscan result=0
09:38:47 Check angles
09:38:47 SkyScan query
09:38:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
09:38:48 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
09:38:48 Check angles
09:38:48 SkyScan query
09:38:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
09:38:49 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
09:38:49 Check angles
09:38:49 SkyScan query
09:38:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.34<-16356  Statuses=0008 0009
09:38:49 Msec=1500  True Az=112.995  Ze=-65.34  Az status=0008  Ze status=0009
09:38:49 Check angles
09:38:49 SkyScan query
09:38:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.295<-17753  Statuses=0008 0009
09:38:50 Msec=2250  True Az=112.995  Ze=-86.295  Az status=0008  Ze status=0009
09:38:50 Check angles
09:38:50 SkyScan query
09:38:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.235<-19149  Statuses=0008 0009
09:38:51 Msec=3000  True Az=112.995  Ze=-107.235  Az status=0008  Ze status=0009
09:38:51 Check angles
09:38:51 SkyScan query
09:38:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.175<-20545  Statuses=0008 0009
09:38:52 Msec=3750  True Az=112.995  Ze=-128.175  Az status=0008  Ze status=0009
09:38:52 Check angles
09:38:52 SkyScan query
09:38:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.145<-21943  Statuses=0008 0009
09:38:52 Msec=4500  True Az=112.995  Ze=-149.145  Az status=0008  Ze status=0009
09:38:52 Check angles
09:38:52 SkyScan query
09:38:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.055<-23337  Statuses=0008 0009
09:38:53 Msec=5250  True Az=112.995  Ze=-170.055  Az status=0008  Ze status=0009
09:38:53 Check angles
09:38:53 SkyScan query
09:38:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:38:54 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:38:54 Message to Master queued w/err=0: serial=189382 error=0
09:38:59 Received message from Master: op=Filter serial=189383
09:38:59 Color wheel filter change from 0 to 0
09:38:59 FLIGetFilterPos err=0  currentPosition=0
09:38:59 FLIGetStepsRemaining err=0  RemainingSteps=0
09:38:59 Filter is already there-color wheel unchanged
09:38:59 Received message from Master: op=Shutter serial=189384
09:38:59 Shutter LASER open
09:38:59 Received message from Camera: op=State serial=189386
09:38:59 GetSingleValue result=40  Value=cccccccc
09:38:59 SkyScan query
09:39:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:39:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:39:00 Parameters OK
09:39:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:39:00 Set A/D data flow result=40
09:39:00 Set A/D channel type result=40
09:39:00 Set A/D encoding result=40
09:39:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:39:00 Set channel filter=0.000000e+000  result=40
09:39:00 Config A/D  Result=40
09:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:39:00 Get A/D filter: -9.255963e+061  result=40
09:39:00 Get A/D value=-858993460  result=40
09:39:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:39:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:39:00 Parameters OK
09:39:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:39:00 Set A/D data flow result=40
09:39:00 Set A/D channel type result=40
09:39:00 Set A/D encoding result=40
09:39:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:39:00 Set channel filter=0.000000e+000  result=40
09:39:00 Config A/D  Result=40
09:39:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:39:00 Get A/D filter: -9.255963e+061  result=40
09:39:00 Get A/D value=-858993460  result=40
09:39:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:39:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:39:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:39:00 Aux=
09:39:00 Message to Camera, serial 189386 queued
09:39:08 Received message from Master: op=Shutter serial=189396
09:39:08 Shutter LASER close
09:39:09 Received message from Master: op=PointingHead serial=189400
09:39:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:39:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:39:09 Point started: ret=0
09:39:09 point_skyscan result=0
09:39:10 Check angles
09:39:10 SkyScan query
09:39:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.385<-21559  Statuses=0008 0009
09:39:10 Msec=0  True Az=112.995  Ze=-143.385  Az status=0008  Ze status=0009
09:39:11 Check angles
09:39:11 SkyScan query
09:39:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.415<-20161  Statuses=0008 0009
09:39:11 Msec=750  True Az=112.995  Ze=-122.415  Az status=0008  Ze status=0009
09:39:11 Check angles
09:39:11 SkyScan query
09:39:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.46<-18764  Statuses=0008 0009
09:39:12 Msec=1500  True Az=112.995  Ze=-101.46  Az status=0008  Ze status=0009
09:39:12 Check angles
09:39:12 SkyScan query
09:39:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.085<-17339  Statuses=0008 0009
09:39:13 Msec=2250  True Az=112.995  Ze=-80.085  Az status=0008  Ze status=0009
09:39:13 Check angles
09:39:13 SkyScan query
09:39:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.13<-15942  Statuses=0008 0009
09:39:13 Msec=3000  True Az=112.995  Ze=-59.13  Az status=0008  Ze status=0009
09:39:14 Check angles
09:39:14 SkyScan query
09:39:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.145<-14543  Statuses=0008 0009
09:39:14 Msec=3750  True Az=112.995  Ze=-38.145  Az status=0008  Ze status=0009
09:39:14 Check angles
09:39:14 SkyScan query
09:39:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.755<-13117  Statuses=0008 0009
09:39:15 Msec=4500  True Az=112.995  Ze=-16.755  Az status=0008  Ze status=0009
09:39:15 Check angles
09:39:15 SkyScan query
09:39:16 SkyScan query done: ret=0  az=112.995<-7533  ze=4.17<-11722  Statuses=0008 0009
09:39:16 Msec=5250  True Az=112.995  Ze=4.17  Az status=0008  Ze status=0009
09:39:16 Check angles
09:39:16 SkyScan query
09:39:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:39:17 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:39:17 Message to Master queued w/err=0: serial=189400 error=0
09:39:22 Received message from Master: op=Filter serial=189401
09:39:22 Color wheel filter change from 0 to 0
09:39:22 FLIGetFilterPos err=0  currentPosition=0
09:39:22 FLIGetStepsRemaining err=0  RemainingSteps=0
09:39:22 Filter is already there-color wheel unchanged
09:39:22 Received message from Master: op=Shutter serial=189402
09:39:22 Shutter LASER close
09:39:22 Received message from Camera: op=State serial=189404
09:39:22 GetSingleValue result=40  Value=cccccccc
09:39:22 SkyScan query
09:39:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:39:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:39:22 Parameters OK
09:39:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:39:22 Set A/D data flow result=40
09:39:22 Set A/D channel type result=40
09:39:22 Set A/D encoding result=40
09:39:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:39:22 Set channel filter=0.000000e+000  result=40
09:39:22 Config A/D  Result=40
09:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:39:22 Get A/D filter: -9.255963e+061  result=40
09:39:22 Get A/D value=-858993460  result=40
09:39:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:39:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:39:22 Parameters OK
09:39:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:39:22 Set A/D data flow result=40
09:39:22 Set A/D channel type result=40
09:39:22 Set A/D encoding result=40
09:39:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:39:22 Set channel filter=0.000000e+000  result=40
09:39:22 Config A/D  Result=40
09:39:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:39:22 Get A/D filter: -9.255963e+061  result=40
09:39:22 Get A/D value=-858993460  result=40
09:39:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:39:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:39:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:39:22 Aux=
09:39:22 Message to Camera, serial 189404 queued
09:39:59 Received message from Master: op=PointingHead serial=189417
09:39:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:39:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:40:00 Point started: ret=0
09:40:00 point_skyscan result=0
09:40:00 Check angles
09:40:00 SkyScan query
09:40:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:40:01 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:40:01 Message to Master queued w/err=0: serial=189417 error=0
09:40:06 Received message from Master: op=Filter serial=189418
09:40:06 Color wheel filter change from 0 to 0
09:40:06 FLIGetFilterPos err=0  currentPosition=0
09:40:06 FLIGetStepsRemaining err=0  RemainingSteps=0
09:40:06 Filter is already there-color wheel unchanged
09:40:06 Received message from Master: op=Shutter serial=189419
09:40:06 Shutter LASER close
09:40:06 Received message from Camera: op=State serial=189421
09:40:06 GetSingleValue result=40  Value=cccccccc
09:40:06 SkyScan query
09:40:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:40:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:40:07 Parameters OK
09:40:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:40:07 Set A/D data flow result=40
09:40:07 Set A/D channel type result=40
09:40:07 Set A/D encoding result=40
09:40:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:40:07 Set channel filter=0.000000e+000  result=40
09:40:07 Config A/D  Result=40
09:40:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:40:07 Get A/D filter: -9.255963e+061  result=40
09:40:07 Get A/D value=-858993460  result=40
09:40:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:40:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:40:07 Parameters OK
09:40:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:40:07 Set A/D data flow result=40
09:40:07 Set A/D channel type result=40
09:40:07 Set A/D encoding result=40
09:40:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:40:07 Set channel filter=0.000000e+000  result=40
09:40:07 Config A/D  Result=40
09:40:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:40:07 Get A/D filter: -9.255963e+061  result=40
09:40:07 Get A/D value=-858993460  result=40
09:40:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:40:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:40:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:40:07 Aux=
09:40:07 Message to Camera, serial 189421 queued
09:40:44 Received message from Master: op=PointingHead serial=189434
09:40:44 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:40:44 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:40:44 Point started: ret=0
09:40:44 point_skyscan result=0
09:40:45 Check angles
09:40:45 SkyScan query
09:40:45 SkyScan query done: ret=0  az=136.08<-9072  ze=-6.51<-12434  Statuses=0009 0008
09:40:45 Msec=0  True Az=136.08  Ze=-6.51  Az status=0009  Ze status=0008
09:40:45 Check angles
09:40:45 SkyScan query
09:40:46 SkyScan query done: ret=0  az=153.525<-10235  ze=-6.495<-12433  Statuses=0009 0008
09:40:46 Msec=750  True Az=153.525  Ze=-6.495  Az status=0009  Ze status=0008
09:40:46 Check angles
09:40:46 SkyScan query
09:40:47 SkyScan query done: ret=0  az=171.39<-11426  ze=-6.495<-12433  Statuses=0009 0008
09:40:47 Msec=1500  True Az=171.39  Ze=-6.495  Az status=0009  Ze status=0008
09:40:47 Check angles
09:40:47 SkyScan query
09:40:48 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:40:48 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:40:48 Message to Master queued w/err=0: serial=189434 error=0
09:40:53 Received message from Master: op=Filter serial=189435
09:40:53 Color wheel filter change from 0 to 0
09:40:53 FLIGetFilterPos err=0  currentPosition=0
09:40:53 FLIGetStepsRemaining err=0  RemainingSteps=0
09:40:53 Filter is already there-color wheel unchanged
09:40:53 Received message from Master: op=Shutter serial=189436
09:40:53 Shutter LASER close
09:40:53 Received message from Camera: op=State serial=189438
09:40:53 GetSingleValue result=40  Value=cccccccc
09:40:53 SkyScan query
09:40:53 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:40:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:40:53 Parameters OK
09:40:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:40:53 Set A/D data flow result=40
09:40:53 Set A/D channel type result=40
09:40:53 Set A/D encoding result=40
09:40:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:40:53 Set channel filter=0.000000e+000  result=40
09:40:53 Config A/D  Result=40
09:40:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:40:53 Get A/D filter: -9.255963e+061  result=40
09:40:53 Get A/D value=-858993460  result=40
09:40:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:40:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:40:53 Parameters OK
09:40:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:40:53 Set A/D data flow result=40
09:40:53 Set A/D channel type result=40
09:40:53 Set A/D encoding result=40
09:40:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:40:53 Set channel filter=0.000000e+000  result=40
09:40:53 Config A/D  Result=40
09:40:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:40:53 Get A/D filter: -9.255963e+061  result=40
09:40:53 Get A/D value=-858993460  result=40
09:40:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:40:53 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:40:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:40:53 Aux=
09:40:53 Message to Camera, serial 189438 queued
09:41:29 Received message from Master: op=PointingHead serial=189450
09:41:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:41:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:41:30 Point started: ret=0
09:41:30 point_skyscan result=0
09:41:30 Check angles
09:41:30 SkyScan query
09:41:31 SkyScan query done: ret=0  az=153.225<-10215  ze=6.51<-11566  Statuses=0009 0008
09:41:31 Msec=0  True Az=153.225  Ze=6.51  Az status=0009  Ze status=0008
09:41:31 Check angles
09:41:31 SkyScan query
09:41:32 SkyScan query done: ret=0  az=135.705<-9047  ze=6.495<-11567  Statuses=0009 0008
09:41:32 Msec=750  True Az=135.705  Ze=6.495  Az status=0009  Ze status=0008
09:41:32 Check angles
09:41:32 SkyScan query
09:41:32 SkyScan query done: ret=0  az=118.245<-7883  ze=6.495<-11567  Statuses=0009 0008
09:41:32 Msec=1500  True Az=118.245  Ze=6.495  Az status=0009  Ze status=0008
09:41:33 Check angles
09:41:33 SkyScan query
09:41:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:41:33 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:41:33 Message to Master queued w/err=0: serial=189450 error=0
09:41:38 Received message from Master: op=Filter serial=189451
09:41:38 Color wheel filter change from 0 to 0
09:41:38 FLIGetFilterPos err=0  currentPosition=0
09:41:38 FLIGetStepsRemaining err=0  RemainingSteps=0
09:41:38 Filter is already there-color wheel unchanged
09:41:38 Received message from Master: op=Shutter serial=189452
09:41:38 Shutter LASER close
09:41:38 Received message from Camera: op=State serial=189454
09:41:38 GetSingleValue result=40  Value=cccccccc
09:41:38 SkyScan query
09:41:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:41:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:41:39 Parameters OK
09:41:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:41:39 Set A/D data flow result=40
09:41:39 Set A/D channel type result=40
09:41:39 Set A/D encoding result=40
09:41:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:41:39 Set channel filter=0.000000e+000  result=40
09:41:39 Config A/D  Result=40
09:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:41:39 Get A/D filter: -9.255963e+061  result=40
09:41:39 Get A/D value=-858993460  result=40
09:41:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:41:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:41:39 Parameters OK
09:41:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:41:39 Set A/D data flow result=40
09:41:39 Set A/D channel type result=40
09:41:39 Set A/D encoding result=40
09:41:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:41:39 Set channel filter=0.000000e+000  result=40
09:41:39 Config A/D  Result=40
09:41:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:41:39 Get A/D filter: -9.255963e+061  result=40
09:41:39 Get A/D value=-858993460  result=40
09:41:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:41:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:41:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:41:39 Aux=
09:41:39 Message to Camera, serial 189454 queued
09:42:16 Received message from Master: op=PointingHead serial=189467
09:42:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:42:16 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:42:16 Point started: ret=0
09:42:16 point_skyscan result=0
09:42:17 Check angles
09:42:17 SkyScan query
09:42:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
09:42:17 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
09:42:18 Check angles
09:42:18 SkyScan query
09:42:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
09:42:18 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
09:42:18 Check angles
09:42:18 SkyScan query
09:42:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
09:42:19 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
09:42:19 Check angles
09:42:19 SkyScan query
09:42:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
09:42:20 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
09:42:20 Check angles
09:42:20 SkyScan query
09:42:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.82<-19188  Statuses=0008 0009
09:42:20 Msec=3000  True Az=112.995  Ze=-107.82  Az status=0008  Ze status=0009
09:42:21 Check angles
09:42:21 SkyScan query
09:42:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.21<-20614  Statuses=0008 0009
09:42:21 Msec=3750  True Az=112.995  Ze=-129.21  Az status=0008  Ze status=0009
09:42:21 Check angles
09:42:21 SkyScan query
09:42:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.585<-22039  Statuses=0008 0009
09:42:22 Msec=4500  True Az=112.995  Ze=-150.585  Az status=0008  Ze status=0009
09:42:22 Check angles
09:42:22 SkyScan query
09:42:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.63<-23442  Statuses=0008 0009
09:42:23 Msec=5250  True Az=112.995  Ze=-171.63  Az status=0008  Ze status=0009
09:42:23 Check angles
09:42:23 SkyScan query
09:42:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:42:24 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:42:24 Message to Master queued w/err=0: serial=189467 error=0
09:42:29 Received message from Master: op=Filter serial=189468
09:42:29 Color wheel filter change from 0 to 0
09:42:29 FLIGetFilterPos err=0  currentPosition=0
09:42:29 FLIGetStepsRemaining err=0  RemainingSteps=0
09:42:29 Filter is already there-color wheel unchanged
09:42:29 Received message from Master: op=Shutter serial=189469
09:42:29 Shutter LASER open
09:42:29 Received message from Camera: op=State serial=189471
09:42:29 GetSingleValue result=40  Value=cccccccc
09:42:29 SkyScan query
09:42:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:42:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:42:29 Parameters OK
09:42:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:42:29 Set A/D data flow result=40
09:42:29 Set A/D channel type result=40
09:42:29 Set A/D encoding result=40
09:42:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:42:29 Set channel filter=0.000000e+000  result=40
09:42:29 Config A/D  Result=40
09:42:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:42:29 Get A/D filter: -9.255963e+061  result=40
09:42:29 Get A/D value=-858993460  result=40
09:42:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:42:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:42:29 Parameters OK
09:42:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:42:29 Set A/D data flow result=40
09:42:29 Set A/D channel type result=40
09:42:29 Set A/D encoding result=40
09:42:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:42:29 Set channel filter=0.000000e+000  result=40
09:42:29 Config A/D  Result=40
09:42:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:42:29 Get A/D filter: -9.255963e+061  result=40
09:42:29 Get A/D value=-858993460  result=40
09:42:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:42:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:42:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:42:29 Aux=
09:42:29 Message to Camera, serial 189471 queued
09:42:38 Received message from Master: op=Shutter serial=189481
09:42:38 Shutter LASER close
09:42:38 Received message from Master: op=PointingHead serial=189485
09:42:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:42:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:42:39 Point started: ret=0
09:42:39 point_skyscan result=0
09:42:39 Check angles
09:42:39 SkyScan query
09:42:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
09:42:40 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
09:42:40 Check angles
09:42:40 SkyScan query
09:42:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.475<-20165  Statuses=0008 0009
09:42:41 Msec=750  True Az=112.995  Ze=-122.475  Az status=0008  Ze status=0009
09:42:41 Check angles
09:42:41 SkyScan query
09:42:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.505<-18767  Statuses=0008 0009
09:42:41 Msec=1500  True Az=112.995  Ze=-101.505  Az status=0008  Ze status=0009
09:42:42 Check angles
09:42:42 SkyScan query
09:42:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
09:42:42 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
09:42:42 Check angles
09:42:42 SkyScan query
09:42:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.175<-15945  Statuses=0008 0009
09:42:43 Msec=3000  True Az=112.995  Ze=-59.175  Az status=0008  Ze status=0009
09:42:43 Check angles
09:42:43 SkyScan query
09:42:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.19<-14546  Statuses=0008 0009
09:42:44 Msec=3750  True Az=112.995  Ze=-38.19  Az status=0008  Ze status=0009
09:42:44 Check angles
09:42:44 SkyScan query
09:42:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.8<-13120  Statuses=0008 0009
09:42:44 Msec=4500  True Az=112.995  Ze=-16.8  Az status=0008  Ze status=0009
09:42:45 Check angles
09:42:45 SkyScan query
09:42:45 SkyScan query done: ret=0  az=112.995<-7533  ze=4.485<-11701  Statuses=0008 0009
09:42:45 Msec=5250  True Az=112.995  Ze=4.485  Az status=0008  Ze status=0009
09:42:45 Check angles
09:42:45 SkyScan query
09:42:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:42:46 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:42:46 Message to Master queued w/err=0: serial=189485 error=0
09:42:51 Received message from Master: op=Filter serial=189486
09:42:51 Color wheel filter change from 0 to 0
09:42:51 FLIGetFilterPos err=0  currentPosition=0
09:42:51 FLIGetStepsRemaining err=0  RemainingSteps=0
09:42:51 Filter is already there-color wheel unchanged
09:42:51 Received message from Master: op=Shutter serial=189487
09:42:51 Shutter LASER close
09:42:51 Received message from Camera: op=State serial=189489
09:42:51 GetSingleValue result=40  Value=cccccccc
09:42:51 SkyScan query
09:42:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:42:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:42:52 Parameters OK
09:42:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:42:52 Set A/D data flow result=40
09:42:52 Set A/D channel type result=40
09:42:52 Set A/D encoding result=40
09:42:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:42:52 Set channel filter=0.000000e+000  result=40
09:42:52 Config A/D  Result=40
09:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:42:52 Get A/D filter: -9.255963e+061  result=40
09:42:52 Get A/D value=-858993460  result=40
09:42:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:42:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:42:52 Parameters OK
09:42:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:42:52 Set A/D data flow result=40
09:42:52 Set A/D channel type result=40
09:42:52 Set A/D encoding result=40
09:42:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:42:52 Set channel filter=0.000000e+000  result=40
09:42:52 Config A/D  Result=40
09:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:42:52 Get A/D filter: -9.255963e+061  result=40
09:42:52 Get A/D value=-858993460  result=40
09:42:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:42:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:42:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:42:52 Aux=
09:42:52 Message to Camera, serial 189489 queued
09:43:29 Received message from Master: op=PointingHead serial=189502
09:43:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:43:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:43:29 Point started: ret=0
09:43:29 point_skyscan result=0
09:43:30 Check angles
09:43:30 SkyScan query
09:43:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:43:30 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:43:30 Message to Master queued w/err=0: serial=189502 error=0
09:43:35 Received message from Master: op=Filter serial=189503
09:43:35 Color wheel filter change from 0 to 0
09:43:35 FLIGetFilterPos err=0  currentPosition=0
09:43:35 FLIGetStepsRemaining err=0  RemainingSteps=0
09:43:35 Filter is already there-color wheel unchanged
09:43:36 Received message from Master: op=Shutter serial=189504
09:43:36 Shutter LASER close
09:43:36 Received message from Camera: op=State serial=189506
09:43:36 GetSingleValue result=40  Value=cccccccc
09:43:36 SkyScan query
09:43:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:43:36 Parameters OK
09:43:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:43:36 Set A/D data flow result=40
09:43:36 Set A/D channel type result=40
09:43:36 Set A/D encoding result=40
09:43:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:43:36 Set channel filter=0.000000e+000  result=40
09:43:36 Config A/D  Result=40
09:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:43:36 Get A/D filter: -9.255963e+061  result=40
09:43:36 Get A/D value=-858993460  result=40
09:43:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:43:36 Parameters OK
09:43:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:43:36 Set A/D data flow result=40
09:43:36 Set A/D channel type result=40
09:43:36 Set A/D encoding result=40
09:43:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:43:36 Set channel filter=0.000000e+000  result=40
09:43:36 Config A/D  Result=40
09:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:43:36 Get A/D filter: -9.255963e+061  result=40
09:43:36 Get A/D value=-858993460  result=40
09:43:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:43:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:43:36 Aux=
09:43:36 Message to Camera, serial 189506 queued
[UTC 2019-3-9  09:43:48]
09:44:13 Received message from Master: op=PointingHead serial=189519
09:44:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:44:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:44:13 Point started: ret=0
09:44:13 point_skyscan result=0
09:44:14 Check angles
09:44:14 SkyScan query
09:44:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:44:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:44:15 Message to Master queued w/err=0: serial=189519 error=0
09:44:20 Received message from Master: op=Filter serial=189520
09:44:20 Color wheel filter change from 0 to 0
09:44:20 FLIGetFilterPos err=0  currentPosition=0
09:44:20 FLIGetStepsRemaining err=0  RemainingSteps=0
09:44:20 Filter is already there-color wheel unchanged
09:44:20 Received message from Master: op=Shutter serial=189521
09:44:20 Shutter LASER close
09:44:20 Received message from Camera: op=State serial=189523
09:44:20 GetSingleValue result=40  Value=cccccccc
09:44:20 SkyScan query
09:44:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:44:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:44:21 Parameters OK
09:44:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:44:21 Set A/D data flow result=40
09:44:21 Set A/D channel type result=40
09:44:21 Set A/D encoding result=40
09:44:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:44:21 Set channel filter=0.000000e+000  result=40
09:44:21 Config A/D  Result=40
09:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:44:21 Get A/D filter: -9.255963e+061  result=40
09:44:21 Get A/D value=-858993460  result=40
09:44:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:44:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:44:21 Parameters OK
09:44:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:44:21 Set A/D data flow result=40
09:44:21 Set A/D channel type result=40
09:44:21 Set A/D encoding result=40
09:44:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:44:21 Set channel filter=0.000000e+000  result=40
09:44:21 Config A/D  Result=40
09:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:44:21 Get A/D filter: -9.255963e+061  result=40
09:44:21 Get A/D value=-858993460  result=40
09:44:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:44:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:44:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:44:21 Aux=
09:44:21 Message to Camera, serial 189523 queued
09:44:57 Received message from Master: op=PointingHead serial=189536
09:44:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:44:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:44:58 Point started: ret=0
09:44:58 point_skyscan result=0
09:44:59 Check angles
09:44:59 SkyScan query
09:44:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:44:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:44:59 Message to Master queued w/err=0: serial=189536 error=0
09:45:04 Received message from Master: op=Filter serial=189537
09:45:04 Color wheel filter change from 0 to 0
09:45:04 FLIGetFilterPos err=0  currentPosition=0
09:45:04 FLIGetStepsRemaining err=0  RemainingSteps=0
09:45:04 Filter is already there-color wheel unchanged
09:45:04 Received message from Master: op=Shutter serial=189538
09:45:04 Shutter LASER close
09:45:04 Received message from Camera: op=State serial=189540
09:45:04 GetSingleValue result=40  Value=cccccccc
09:45:04 SkyScan query
09:45:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:45:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:45:05 Parameters OK
09:45:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:45:05 Set A/D data flow result=40
09:45:05 Set A/D channel type result=40
09:45:05 Set A/D encoding result=40
09:45:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:45:05 Set channel filter=0.000000e+000  result=40
09:45:05 Config A/D  Result=40
09:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:45:05 Get A/D filter: -9.255963e+061  result=40
09:45:05 Get A/D value=-858993460  result=40
09:45:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:45:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:45:05 Parameters OK
09:45:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:45:05 Set A/D data flow result=40
09:45:05 Set A/D channel type result=40
09:45:05 Set A/D encoding result=40
09:45:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:45:05 Set channel filter=0.000000e+000  result=40
09:45:05 Config A/D  Result=40
09:45:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:45:05 Get A/D filter: -9.255963e+061  result=40
09:45:05 Get A/D value=-858993460  result=40
09:45:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:45:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:45:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:45:05 Aux=
09:45:05 Message to Camera, serial 189540 queued
09:45:42 Received message from Master: op=PointingHead serial=189553
09:45:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:45:42 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:45:42 Point started: ret=0
09:45:42 point_skyscan result=0
09:45:43 Check angles
09:45:43 SkyScan query
09:45:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.625<-13575  Statuses=0008 0009
09:45:43 Msec=0  True Az=112.995  Ze=-23.625  Az status=0008  Ze status=0009
09:45:44 Check angles
09:45:44 SkyScan query
09:45:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.58<-14972  Statuses=0008 0009
09:45:44 Msec=750  True Az=112.995  Ze=-44.58  Az status=0008  Ze status=0009
09:45:44 Check angles
09:45:44 SkyScan query
09:45:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.015<-16401  Statuses=0008 0009
09:45:45 Msec=1500  True Az=112.995  Ze=-66.015  Az status=0008  Ze status=0009
09:45:45 Check angles
09:45:45 SkyScan query
09:45:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.91<-17794  Statuses=0008 0009
09:45:46 Msec=2250  True Az=112.995  Ze=-86.91  Az status=0008  Ze status=0009
09:45:46 Check angles
09:45:46 SkyScan query
09:45:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.865<-19191  Statuses=0008 0009
09:45:46 Msec=3000  True Az=112.995  Ze=-107.865  Az status=0008  Ze status=0009
09:45:47 Check angles
09:45:47 SkyScan query
09:45:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.805<-20587  Statuses=0008 0009
09:45:47 Msec=3750  True Az=112.995  Ze=-128.805  Az status=0008  Ze status=0009
09:45:47 Check angles
09:45:47 SkyScan query
09:45:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.76<-21984  Statuses=0008 0009
09:45:48 Msec=4500  True Az=112.995  Ze=-149.76  Az status=0008  Ze status=0009
09:45:48 Check angles
09:45:48 SkyScan query
09:45:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.685<-23379  Statuses=0008 0009
09:45:49 Msec=5250  True Az=112.995  Ze=-170.685  Az status=0008  Ze status=0009
09:45:49 Check angles
09:45:49 SkyScan query
09:45:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:45:49 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:45:49 Message to Master queued w/err=0: serial=189553 error=0
09:45:54 Received message from Master: op=Filter serial=189554
09:45:54 Color wheel filter change from 0 to 0
09:45:54 FLIGetFilterPos err=0  currentPosition=0
09:45:54 FLIGetStepsRemaining err=0  RemainingSteps=0
09:45:54 Filter is already there-color wheel unchanged
09:45:55 Received message from Master: op=Shutter serial=189555
09:45:55 Shutter LASER open
09:45:55 Received message from Camera: op=State serial=189557
09:45:55 GetSingleValue result=40  Value=cccccccc
09:45:55 SkyScan query
09:45:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:45:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:45:55 Parameters OK
09:45:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:45:55 Set A/D data flow result=40
09:45:55 Set A/D channel type result=40
09:45:55 Set A/D encoding result=40
09:45:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:45:55 Set channel filter=0.000000e+000  result=40
09:45:55 Config A/D  Result=40
09:45:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:45:55 Get A/D filter: -9.255963e+061  result=40
09:45:55 Get A/D value=-858993460  result=40
09:45:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:45:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:45:55 Parameters OK
09:45:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:45:55 Set A/D data flow result=40
09:45:55 Set A/D channel type result=40
09:45:55 Set A/D encoding result=40
09:45:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:45:55 Set channel filter=0.000000e+000  result=40
09:45:55 Config A/D  Result=40
09:45:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:45:55 Get A/D filter: -9.255963e+061  result=40
09:45:55 Get A/D value=-858993460  result=40
09:45:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:45:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:45:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:45:55 Aux=
09:45:55 Message to Camera, serial 189557 queued
09:46:03 Received message from Master: op=Shutter serial=189566
09:46:03 Shutter LASER close
09:46:03 Received message from Master: op=PointingHead serial=189570
09:46:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:46:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:46:04 Point started: ret=0
09:46:04 point_skyscan result=0
09:46:05 Check angles
09:46:05 SkyScan query
09:46:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.755<-21517  Statuses=0008 0009
09:46:05 Msec=0  True Az=112.995  Ze=-142.755  Az status=0008  Ze status=0009
09:46:05 Check angles
09:46:05 SkyScan query
09:46:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.32<-20088  Statuses=0008 0009
09:46:06 Msec=750  True Az=112.995  Ze=-121.32  Az status=0008  Ze status=0009
09:46:06 Check angles
09:46:06 SkyScan query
09:46:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.41<-18694  Statuses=0008 0009
09:46:07 Msec=1500  True Az=112.995  Ze=-100.41  Az status=0008  Ze status=0009
09:46:07 Check angles
09:46:07 SkyScan query
09:46:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
09:46:07 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
09:46:08 Check angles
09:46:08 SkyScan query
09:46:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
09:46:08 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
09:46:08 Check angles
09:46:08 SkyScan query
09:46:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
09:46:09 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
09:46:09 Check angles
09:46:09 SkyScan query
09:46:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.14<-13076  Statuses=0008 0009
09:46:10 Msec=4500  True Az=112.995  Ze=-16.14  Az status=0008  Ze status=0009
09:46:10 Check angles
09:46:10 SkyScan query
09:46:10 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
09:46:10 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
09:46:11 Check angles
09:46:11 SkyScan query
09:46:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:46:11 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:46:11 Message to Master queued w/err=0: serial=189570 error=0
09:46:16 Received message from Master: op=Filter serial=189571
09:46:16 Color wheel filter change from 0 to 0
09:46:16 FLIGetFilterPos err=0  currentPosition=0
09:46:16 FLIGetStepsRemaining err=0  RemainingSteps=0
09:46:16 Filter is already there-color wheel unchanged
09:46:16 Received message from Master: op=Shutter serial=189572
09:46:16 Shutter LASER close
09:46:16 Received message from Camera: op=State serial=189574
09:46:16 GetSingleValue result=40  Value=cccccccc
09:46:16 SkyScan query
09:46:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:46:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:46:17 Parameters OK
09:46:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:46:17 Set A/D data flow result=40
09:46:17 Set A/D channel type result=40
09:46:17 Set A/D encoding result=40
09:46:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:46:17 Set channel filter=0.000000e+000  result=40
09:46:17 Config A/D  Result=40
09:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:46:17 Get A/D filter: -9.255963e+061  result=40
09:46:17 Get A/D value=-858993460  result=40
09:46:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:46:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:46:17 Parameters OK
09:46:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:46:17 Set A/D data flow result=40
09:46:17 Set A/D channel type result=40
09:46:17 Set A/D encoding result=40
09:46:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:46:17 Set channel filter=0.000000e+000  result=40
09:46:17 Config A/D  Result=40
09:46:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:46:17 Get A/D filter: -9.255963e+061  result=40
09:46:17 Get A/D value=-858993460  result=40
09:46:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:46:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:46:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:46:17 Aux=
09:46:17 Message to Camera, serial 189574 queued
09:46:54 Received message from Master: op=PointingHead serial=189587
09:46:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:46:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:46:54 Point started: ret=0
09:46:54 point_skyscan result=0
09:46:55 Check angles
09:46:55 SkyScan query
09:46:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:46:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:46:56 Message to Master queued w/err=0: serial=189587 error=0
09:47:01 Received message from Master: op=Filter serial=189588
09:47:01 Color wheel filter change from 0 to 0
09:47:01 FLIGetFilterPos err=0  currentPosition=0
09:47:01 FLIGetStepsRemaining err=0  RemainingSteps=0
09:47:01 Filter is already there-color wheel unchanged
09:47:01 Received message from Master: op=Shutter serial=189589
09:47:01 Shutter LASER close
09:47:01 Received message from Camera: op=State serial=189591
09:47:01 GetSingleValue result=40  Value=cccccccc
09:47:01 SkyScan query
09:47:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:47:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:47:01 Parameters OK
09:47:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:47:01 Set A/D data flow result=40
09:47:01 Set A/D channel type result=40
09:47:01 Set A/D encoding result=40
09:47:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:47:01 Set channel filter=0.000000e+000  result=40
09:47:01 Config A/D  Result=40
09:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:47:01 Get A/D filter: -9.255963e+061  result=40
09:47:01 Get A/D value=-858993460  result=40
09:47:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:47:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:47:01 Parameters OK
09:47:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:47:01 Set A/D data flow result=40
09:47:01 Set A/D channel type result=40
09:47:01 Set A/D encoding result=40
09:47:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:47:01 Set channel filter=0.000000e+000  result=40
09:47:01 Config A/D  Result=40
09:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:47:01 Get A/D filter: -9.255963e+061  result=40
09:47:01 Get A/D value=-858993460  result=40
09:47:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:47:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:47:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:47:01 Aux=
09:47:01 Message to Camera, serial 189591 queued
09:47:38 Received message from Master: op=PointingHead serial=189604
09:47:38 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:47:38 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:47:39 Point started: ret=0
09:47:39 point_skyscan result=0
09:47:39 Check angles
09:47:39 SkyScan query
09:47:40 SkyScan query done: ret=0  az=136.41<-9094  ze=-6.51<-12434  Statuses=0009 0008
09:47:40 Msec=0  True Az=136.41  Ze=-6.51  Az status=0009  Ze status=0008
09:47:40 Check angles
09:47:40 SkyScan query
09:47:41 SkyScan query done: ret=0  az=153.885<-10259  ze=-6.495<-12433  Statuses=0009 0008
09:47:41 Msec=750  True Az=153.885  Ze=-6.495  Az status=0009  Ze status=0008
09:47:41 Check angles
09:47:41 SkyScan query
09:47:41 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.495<-12433  Statuses=0009 0008
09:47:41 Msec=1500  True Az=171.315  Ze=-6.495  Az status=0009  Ze status=0008
09:47:42 Check angles
09:47:42 SkyScan query
09:47:42 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:47:42 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:47:42 Message to Master queued w/err=0: serial=189604 error=0
09:47:47 Received message from Master: op=Filter serial=189605
09:47:47 Color wheel filter change from 0 to 0
09:47:47 FLIGetFilterPos err=0  currentPosition=0
09:47:47 FLIGetStepsRemaining err=0  RemainingSteps=0
09:47:47 Filter is already there-color wheel unchanged
09:47:47 Received message from Master: op=Shutter serial=189606
09:47:47 Shutter LASER close
09:47:47 Received message from Camera: op=State serial=189608
09:47:47 GetSingleValue result=40  Value=cccccccc
09:47:47 SkyScan query
09:47:48 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:47:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:47:48 Parameters OK
09:47:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:47:48 Set A/D data flow result=40
09:47:48 Set A/D channel type result=40
09:47:48 Set A/D encoding result=40
09:47:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:47:48 Set channel filter=0.000000e+000  result=40
09:47:48 Config A/D  Result=40
09:47:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:47:48 Get A/D filter: -9.255963e+061  result=40
09:47:48 Get A/D value=-858993460  result=40
09:47:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:47:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:47:48 Parameters OK
09:47:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:47:48 Set A/D data flow result=40
09:47:48 Set A/D channel type result=40
09:47:48 Set A/D encoding result=40
09:47:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:47:48 Set channel filter=0.000000e+000  result=40
09:47:48 Config A/D  Result=40
09:47:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:47:48 Get A/D filter: -9.255963e+061  result=40
09:47:48 Get A/D value=-858993460  result=40
09:47:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:47:48 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:47:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:47:48 Aux=
09:47:48 Message to Camera, serial 189608 queued
09:48:25 Received message from Master: op=PointingHead serial=189621
09:48:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:48:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:48:25 Point started: ret=0
09:48:25 point_skyscan result=0
09:48:26 Check angles
09:48:26 SkyScan query
09:48:26 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
09:48:26 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
09:48:27 Check angles
09:48:27 SkyScan query
09:48:27 SkyScan query done: ret=0  az=134.805<-8987  ze=6.495<-11567  Statuses=0009 0008
09:48:27 Msec=750  True Az=134.805  Ze=6.495  Az status=0009  Ze status=0008
09:48:27 Check angles
09:48:27 SkyScan query
09:48:28 SkyScan query done: ret=0  az=117.285<-7819  ze=6.495<-11567  Statuses=0009 0008
09:48:28 Msec=1500  True Az=117.285  Ze=6.495  Az status=0009  Ze status=0008
09:48:28 Check angles
09:48:28 SkyScan query
09:48:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:48:29 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:48:29 Message to Master queued w/err=0: serial=189621 error=0
09:48:34 Received message from Master: op=Filter serial=189622
09:48:34 Color wheel filter change from 0 to 0
09:48:34 FLIGetFilterPos err=0  currentPosition=0
09:48:34 FLIGetStepsRemaining err=0  RemainingSteps=0
09:48:34 Filter is already there-color wheel unchanged
09:48:34 Received message from Master: op=Shutter serial=189623
09:48:34 Shutter LASER close
09:48:34 Received message from Camera: op=State serial=189625
09:48:34 GetSingleValue result=40  Value=cccccccc
09:48:34 SkyScan query
09:48:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:48:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:48:35 Parameters OK
09:48:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:48:35 Set A/D data flow result=40
09:48:35 Set A/D channel type result=40
09:48:35 Set A/D encoding result=40
09:48:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:48:35 Set channel filter=0.000000e+000  result=40
09:48:35 Config A/D  Result=40
09:48:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:48:35 Get A/D filter: -9.255963e+061  result=40
09:48:35 Get A/D value=-858993460  result=40
09:48:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:48:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:48:35 Parameters OK
09:48:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:48:35 Set A/D data flow result=40
09:48:35 Set A/D channel type result=40
09:48:35 Set A/D encoding result=40
09:48:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:48:35 Set channel filter=0.000000e+000  result=40
09:48:35 Config A/D  Result=40
09:48:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:48:35 Get A/D filter: -9.255963e+061  result=40
09:48:35 Get A/D value=-858993460  result=40
09:48:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:48:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:48:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:48:35 Aux=
09:48:35 Message to Camera, serial 189625 queued
09:49:11 Received message from Master: op=PointingHead serial=189638
09:49:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:49:11 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:49:12 Point started: ret=0
09:49:12 point_skyscan result=0
09:49:12 Check angles
09:49:12 SkyScan query
09:49:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
09:49:13 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
09:49:13 Check angles
09:49:13 SkyScan query
09:49:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.955<-14997  Statuses=0008 0009
09:49:14 Msec=750  True Az=112.995  Ze=-44.955  Az status=0008  Ze status=0009
09:49:14 Check angles
09:49:14 SkyScan query
09:49:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.895<-16393  Statuses=0008 0009
09:49:15 Msec=1500  True Az=112.995  Ze=-65.895  Az status=0008  Ze status=0009
09:49:15 Check angles
09:49:15 SkyScan query
09:49:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.835<-17789  Statuses=0008 0009
09:49:15 Msec=2250  True Az=112.995  Ze=-86.835  Az status=0008  Ze status=0009
09:49:15 Check angles
09:49:15 SkyScan query
09:49:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.805<-19187  Statuses=0008 0009
09:49:16 Msec=3000  True Az=112.995  Ze=-107.805  Az status=0008  Ze status=0009
09:49:16 Check angles
09:49:16 SkyScan query
09:49:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.745<-20583  Statuses=0008 0009
09:49:17 Msec=3750  True Az=112.995  Ze=-128.745  Az status=0008  Ze status=0009
09:49:17 Check angles
09:49:17 SkyScan query
09:49:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
09:49:18 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
09:49:18 Check angles
09:49:18 SkyScan query
09:49:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
09:49:18 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
09:49:18 Check angles
09:49:18 SkyScan query
09:49:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:49:19 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:49:19 Message to Master queued w/err=0: serial=189638 error=0
09:49:24 Received message from Master: op=Filter serial=189639
09:49:24 Color wheel filter change from 0 to 0
09:49:24 FLIGetFilterPos err=0  currentPosition=0
09:49:24 FLIGetStepsRemaining err=0  RemainingSteps=0
09:49:24 Filter is already there-color wheel unchanged
09:49:24 Received message from Master: op=Shutter serial=189640
09:49:24 Shutter LASER open
09:49:24 Received message from Camera: op=State serial=189642
09:49:24 GetSingleValue result=40  Value=cccccccc
09:49:24 SkyScan query
09:49:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:49:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:49:25 Parameters OK
09:49:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:49:25 Set A/D data flow result=40
09:49:25 Set A/D channel type result=40
09:49:25 Set A/D encoding result=40
09:49:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:49:25 Set channel filter=0.000000e+000  result=40
09:49:25 Config A/D  Result=40
09:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:49:25 Get A/D filter: -9.255963e+061  result=40
09:49:25 Get A/D value=-858993460  result=40
09:49:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:49:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:49:25 Parameters OK
09:49:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:49:25 Set A/D data flow result=40
09:49:25 Set A/D channel type result=40
09:49:25 Set A/D encoding result=40
09:49:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:49:25 Set channel filter=0.000000e+000  result=40
09:49:25 Config A/D  Result=40
09:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:49:25 Get A/D filter: -9.255963e+061  result=40
09:49:25 Get A/D value=-858993460  result=40
09:49:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:49:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:49:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:49:25 Aux=
09:49:25 Message to Camera, serial 189642 queued
09:49:33 Received message from Master: op=Shutter serial=189652
09:49:33 Shutter LASER close
09:49:34 Received message from Master: op=PointingHead serial=189656
09:49:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:49:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:49:34 Point started: ret=0
09:49:34 point_skyscan result=0
09:49:35 Check angles
09:49:35 SkyScan query
09:49:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.25<-21550  Statuses=0008 0009
09:49:36 Msec=0  True Az=112.995  Ze=-143.25  Az status=0008  Ze status=0009
09:49:36 Check angles
09:49:36 SkyScan query
09:49:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
09:49:36 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
09:49:36 Check angles
09:49:36 SkyScan query
09:49:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.905<-18727  Statuses=0008 0009
09:49:37 Msec=1500  True Az=112.995  Ze=-100.905  Az status=0008  Ze status=0009
09:49:37 Check angles
09:49:37 SkyScan query
09:49:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.965<-17331  Statuses=0008 0009
09:49:38 Msec=2250  True Az=112.995  Ze=-79.965  Az status=0008  Ze status=0009
09:49:38 Check angles
09:49:38 SkyScan query
09:49:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.025<-15935  Statuses=0008 0009
09:49:39 Msec=3000  True Az=112.995  Ze=-59.025  Az status=0008  Ze status=0009
09:49:39 Check angles
09:49:39 SkyScan query
09:49:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.025<-14535  Statuses=0008 0009
09:49:39 Msec=3750  True Az=112.995  Ze=-38.025  Az status=0008  Ze status=0009
09:49:39 Check angles
09:49:39 SkyScan query
09:49:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.07<-13138  Statuses=0008 0009
09:49:40 Msec=4500  True Az=112.995  Ze=-17.07  Az status=0008  Ze status=0009
09:49:40 Check angles
09:49:40 SkyScan query
09:49:41 SkyScan query done: ret=0  az=112.995<-7533  ze=3.885<-11741  Statuses=0008 0009
09:49:41 Msec=5250  True Az=112.995  Ze=3.885  Az status=0008  Ze status=0009
09:49:41 Check angles
09:49:41 SkyScan query
09:49:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:49:42 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:49:42 Message to Master queued w/err=0: serial=189656 error=0
09:49:47 Received message from Master: op=Filter serial=189657
09:49:47 Color wheel filter change from 0 to 0
09:49:47 FLIGetFilterPos err=0  currentPosition=0
09:49:47 FLIGetStepsRemaining err=0  RemainingSteps=0
09:49:47 Filter is already there-color wheel unchanged
09:49:47 Received message from Master: op=Shutter serial=189658
09:49:47 Shutter LASER close
09:49:47 Received message from Camera: op=State serial=189660
09:49:47 GetSingleValue result=40  Value=cccccccc
09:49:47 SkyScan query
09:49:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:49:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:49:47 Parameters OK
09:49:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:49:47 Set A/D data flow result=40
09:49:47 Set A/D channel type result=40
09:49:47 Set A/D encoding result=40
09:49:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:49:47 Set channel filter=0.000000e+000  result=40
09:49:47 Config A/D  Result=40
09:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:49:47 Get A/D filter: -9.255963e+061  result=40
09:49:47 Get A/D value=-858993460  result=40
09:49:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:49:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:49:47 Parameters OK
09:49:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:49:47 Set A/D data flow result=40
09:49:47 Set A/D channel type result=40
09:49:47 Set A/D encoding result=40
09:49:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:49:47 Set channel filter=0.000000e+000  result=40
09:49:47 Config A/D  Result=40
09:49:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:49:47 Get A/D filter: -9.255963e+061  result=40
09:49:47 Get A/D value=-858993460  result=40
09:49:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:49:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:49:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:49:47 Aux=
09:49:47 Message to Camera, serial 189660 queued
09:50:24 Received message from Master: op=PointingHead serial=189673
09:50:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:50:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:50:25 Point started: ret=0
09:50:25 point_skyscan result=0
09:50:25 Check angles
09:50:25 SkyScan query
09:50:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:50:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:50:26 Message to Master queued w/err=0: serial=189673 error=0
09:50:31 Received message from Master: op=Filter serial=189674
09:50:31 Color wheel filter change from 0 to 0
09:50:31 FLIGetFilterPos err=0  currentPosition=0
09:50:31 FLIGetStepsRemaining err=0  RemainingSteps=0
09:50:31 Filter is already there-color wheel unchanged
09:50:31 Received message from Master: op=Shutter serial=189675
09:50:31 Shutter LASER close
09:50:31 Received message from Camera: op=State serial=189677
09:50:31 GetSingleValue result=40  Value=cccccccc
09:50:31 SkyScan query
09:50:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:50:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:50:32 Parameters OK
09:50:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:50:32 Set A/D data flow result=40
09:50:32 Set A/D channel type result=40
09:50:32 Set A/D encoding result=40
09:50:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:50:32 Set channel filter=0.000000e+000  result=40
09:50:32 Config A/D  Result=40
09:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:50:32 Get A/D filter: -9.255963e+061  result=40
09:50:32 Get A/D value=-858993460  result=40
09:50:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:50:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:50:32 Parameters OK
09:50:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:50:32 Set A/D data flow result=40
09:50:32 Set A/D channel type result=40
09:50:32 Set A/D encoding result=40
09:50:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:50:32 Set channel filter=0.000000e+000  result=40
09:50:32 Config A/D  Result=40
09:50:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:50:32 Get A/D filter: -9.255963e+061  result=40
09:50:32 Get A/D value=-858993460  result=40
09:50:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:50:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:50:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:50:32 Aux=
09:50:32 Message to Camera, serial 189677 queued
09:51:09 Received message from Master: op=PointingHead serial=189690
09:51:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:51:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:51:09 Point started: ret=0
09:51:09 point_skyscan result=0
09:51:10 Check angles
09:51:10 SkyScan query
09:51:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:51:10 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:51:10 Message to Master queued w/err=0: serial=189690 error=0
09:51:15 Received message from Master: op=Filter serial=189691
09:51:15 Color wheel filter change from 0 to 0
09:51:15 FLIGetFilterPos err=0  currentPosition=0
09:51:15 FLIGetStepsRemaining err=0  RemainingSteps=0
09:51:15 Filter is already there-color wheel unchanged
09:51:16 Received message from Master: op=Shutter serial=189692
09:51:16 Shutter LASER close
09:51:16 Received message from Camera: op=State serial=189694
09:51:16 GetSingleValue result=40  Value=cccccccc
09:51:16 SkyScan query
09:51:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:51:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:51:16 Parameters OK
09:51:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:51:16 Set A/D data flow result=40
09:51:16 Set A/D channel type result=40
09:51:16 Set A/D encoding result=40
09:51:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:51:16 Set channel filter=0.000000e+000  result=40
09:51:16 Config A/D  Result=40
09:51:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:51:16 Get A/D filter: -9.255963e+061  result=40
09:51:16 Get A/D value=-858993460  result=40
09:51:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:51:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:51:16 Parameters OK
09:51:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:51:16 Set A/D data flow result=40
09:51:16 Set A/D channel type result=40
09:51:16 Set A/D encoding result=40
09:51:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:51:16 Set channel filter=0.000000e+000  result=40
09:51:16 Config A/D  Result=40
09:51:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:51:16 Get A/D filter: -9.255963e+061  result=40
09:51:16 Get A/D value=-858993460  result=40
09:51:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:51:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:51:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:51:16 Aux=
09:51:16 Message to Camera, serial 189694 queued
09:51:53 Received message from Master: op=PointingHead serial=189707
09:51:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:51:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:51:53 Point started: ret=0
09:51:53 point_skyscan result=0
09:51:54 Check angles
09:51:54 SkyScan query
09:51:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:51:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:51:55 Message to Master queued w/err=0: serial=189707 error=0
09:52:00 Received message from Master: op=Filter serial=189708
09:52:00 Color wheel filter change from 0 to 0
09:52:00 FLIGetFilterPos err=0  currentPosition=0
09:52:00 FLIGetStepsRemaining err=0  RemainingSteps=0
09:52:00 Filter is already there-color wheel unchanged
09:52:00 Received message from Master: op=Shutter serial=189709
09:52:00 Shutter LASER close
09:52:00 Received message from Camera: op=State serial=189711
09:52:00 GetSingleValue result=40  Value=cccccccc
09:52:00 SkyScan query
09:52:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:52:00 Parameters OK
09:52:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:52:00 Set A/D data flow result=40
09:52:00 Set A/D channel type result=40
09:52:00 Set A/D encoding result=40
09:52:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:52:00 Set channel filter=0.000000e+000  result=40
09:52:00 Config A/D  Result=40
09:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:52:00 Get A/D filter: -9.255963e+061  result=40
09:52:00 Get A/D value=-858993460  result=40
09:52:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:52:00 Parameters OK
09:52:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:52:00 Set A/D data flow result=40
09:52:00 Set A/D channel type result=40
09:52:00 Set A/D encoding result=40
09:52:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:52:00 Set channel filter=0.000000e+000  result=40
09:52:00 Config A/D  Result=40
09:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:52:00 Get A/D filter: -9.255963e+061  result=40
09:52:00 Get A/D value=-858993460  result=40
09:52:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:52:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:52:00 Aux=
09:52:00 Message to Camera, serial 189711 queued
09:52:37 Received message from Master: op=PointingHead serial=189724
09:52:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:52:37 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:52:38 Point started: ret=0
09:52:38 point_skyscan result=0
09:52:38 Check angles
09:52:38 SkyScan query
09:52:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.61<-13574  Statuses=0008 0009
09:52:39 Msec=0  True Az=112.995  Ze=-23.61  Az status=0008  Ze status=0009
09:52:39 Check angles
09:52:39 SkyScan query
09:52:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.565<-14971  Statuses=0008 0009
09:52:40 Msec=750  True Az=112.995  Ze=-44.565  Az status=0008  Ze status=0009
09:52:40 Check angles
09:52:40 SkyScan query
09:52:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.52<-16368  Statuses=0008 0009
09:52:40 Msec=1500  True Az=112.995  Ze=-65.52  Az status=0008  Ze status=0009
09:52:41 Check angles
09:52:41 SkyScan query
09:52:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.49<-17766  Statuses=0008 0009
09:52:41 Msec=2250  True Az=112.995  Ze=-86.49  Az status=0008  Ze status=0009
09:52:41 Check angles
09:52:41 SkyScan query
09:52:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.43<-19162  Statuses=0008 0009
09:52:42 Msec=3000  True Az=112.995  Ze=-107.43  Az status=0008  Ze status=0009
09:52:42 Check angles
09:52:42 SkyScan query
09:52:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.37<-20558  Statuses=0008 0009
09:52:43 Msec=3750  True Az=112.995  Ze=-128.37  Az status=0008  Ze status=0009
09:52:43 Check angles
09:52:43 SkyScan query
09:52:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.355<-21957  Statuses=0008 0009
09:52:43 Msec=4500  True Az=112.995  Ze=-149.355  Az status=0008  Ze status=0009
09:52:44 Check angles
09:52:44 SkyScan query
09:52:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.28<-23352  Statuses=0008 0009
09:52:44 Msec=5250  True Az=112.995  Ze=-170.28  Az status=0008  Ze status=0009
09:52:44 Check angles
09:52:44 SkyScan query
09:52:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:52:45 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:52:45 Message to Master queued w/err=0: serial=189724 error=0
09:52:50 Received message from Master: op=Filter serial=189725
09:52:50 Color wheel filter change from 0 to 0
09:52:50 FLIGetFilterPos err=0  currentPosition=0
09:52:50 FLIGetStepsRemaining err=0  RemainingSteps=0
09:52:50 Filter is already there-color wheel unchanged
09:52:50 Received message from Master: op=Shutter serial=189726
09:52:50 Shutter LASER open
09:52:50 Received message from Camera: op=State serial=189728
09:52:50 GetSingleValue result=40  Value=cccccccc
09:52:50 SkyScan query
09:52:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:52:51 Parameters OK
09:52:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:52:51 Set A/D data flow result=40
09:52:51 Set A/D channel type result=40
09:52:51 Set A/D encoding result=40
09:52:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:52:51 Set channel filter=0.000000e+000  result=40
09:52:51 Config A/D  Result=40
09:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:52:51 Get A/D filter: -9.255963e+061  result=40
09:52:51 Get A/D value=-858993460  result=40
09:52:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:52:51 Parameters OK
09:52:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:52:51 Set A/D data flow result=40
09:52:51 Set A/D channel type result=40
09:52:51 Set A/D encoding result=40
09:52:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:52:51 Set channel filter=0.000000e+000  result=40
09:52:51 Config A/D  Result=40
09:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:52:51 Get A/D filter: -9.255963e+061  result=40
09:52:51 Get A/D value=-858993460  result=40
09:52:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:52:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:52:51 Aux=
09:52:51 Message to Camera, serial 189728 queued
09:52:59 Received message from Master: op=Shutter serial=189738
09:52:59 Shutter LASER close
09:53:00 Received message from Master: op=PointingHead serial=189742
09:53:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:53:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:53:00 Point started: ret=0
09:53:00 point_skyscan result=0
09:53:01 Check angles
09:53:01 SkyScan query
09:53:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.89<-21526  Statuses=0008 0009
09:53:02 Msec=0  True Az=112.995  Ze=-142.89  Az status=0008  Ze status=0009
09:53:02 Check angles
09:53:02 SkyScan query
09:53:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.905<-20127  Statuses=0008 0009
09:53:02 Msec=750  True Az=112.995  Ze=-121.905  Az status=0008  Ze status=0009
09:53:02 Check angles
09:53:02 SkyScan query
09:53:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.98<-18732  Statuses=0008 0009
09:53:03 Msec=1500  True Az=112.995  Ze=-100.98  Az status=0008  Ze status=0009
09:53:03 Check angles
09:53:03 SkyScan query
09:53:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.04<-17336  Statuses=0008 0009
09:53:04 Msec=2250  True Az=112.995  Ze=-80.04  Az status=0008  Ze status=0009
09:53:04 Check angles
09:53:04 SkyScan query
09:53:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.1<-15940  Statuses=0008 0009
09:53:05 Msec=3000  True Az=112.995  Ze=-59.1  Az status=0008  Ze status=0009
09:53:05 Check angles
09:53:05 SkyScan query
09:53:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.115<-14541  Statuses=0008 0009
09:53:05 Msec=3750  True Az=112.995  Ze=-38.115  Az status=0008  Ze status=0009
09:53:05 Check angles
09:53:05 SkyScan query
09:53:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.175<-13145  Statuses=0008 0009
09:53:06 Msec=4500  True Az=112.995  Ze=-17.175  Az status=0008  Ze status=0009
09:53:06 Check angles
09:53:06 SkyScan query
09:53:07 SkyScan query done: ret=0  az=112.995<-7533  ze=3.78<-11748  Statuses=0008 0009
09:53:07 Msec=5250  True Az=112.995  Ze=3.78  Az status=0008  Ze status=0009
09:53:07 Check angles
09:53:07 SkyScan query
09:53:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:53:08 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:53:08 Message to Master queued w/err=0: serial=189742 error=0
09:53:13 Received message from Master: op=Filter serial=189743
09:53:13 Color wheel filter change from 0 to 0
09:53:13 FLIGetFilterPos err=0  currentPosition=0
09:53:13 FLIGetStepsRemaining err=0  RemainingSteps=0
09:53:13 Filter is already there-color wheel unchanged
09:53:13 Received message from Master: op=Shutter serial=189744
09:53:13 Shutter LASER close
09:53:13 Received message from Camera: op=State serial=189746
09:53:13 GetSingleValue result=40  Value=cccccccc
09:53:13 SkyScan query
09:53:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:53:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:53:13 Parameters OK
09:53:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:53:13 Set A/D data flow result=40
09:53:13 Set A/D channel type result=40
09:53:13 Set A/D encoding result=40
09:53:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:53:13 Set channel filter=0.000000e+000  result=40
09:53:13 Config A/D  Result=40
09:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:53:13 Get A/D filter: -9.255963e+061  result=40
09:53:13 Get A/D value=-858993460  result=40
09:53:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:53:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:53:13 Parameters OK
09:53:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:53:13 Set A/D data flow result=40
09:53:13 Set A/D channel type result=40
09:53:13 Set A/D encoding result=40
09:53:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:53:13 Set channel filter=0.000000e+000  result=40
09:53:13 Config A/D  Result=40
09:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:53:13 Get A/D filter: -9.255963e+061  result=40
09:53:13 Get A/D value=-858993460  result=40
09:53:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:53:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:53:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:53:13 Aux=
09:53:13 Message to Camera, serial 189746 queued
09:53:50 Received message from Master: op=PointingHead serial=189759
09:53:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:53:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:53:51 Point started: ret=0
09:53:51 point_skyscan result=0
09:53:51 Check angles
09:53:51 SkyScan query
09:53:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:53:52 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:53:52 Message to Master queued w/err=0: serial=189759 error=0
09:53:57 Received message from Master: op=Filter serial=189760
09:53:57 Color wheel filter change from 0 to 0
09:53:57 FLIGetFilterPos err=0  currentPosition=0
09:53:57 FLIGetStepsRemaining err=0  RemainingSteps=0
09:53:57 Filter is already there-color wheel unchanged
09:53:57 Received message from Master: op=Shutter serial=189761
09:53:57 Shutter LASER close
09:53:57 Received message from Camera: op=State serial=189763
09:53:57 GetSingleValue result=40  Value=cccccccc
09:53:57 SkyScan query
09:53:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:53:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:53:58 Parameters OK
09:53:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:53:58 Set A/D data flow result=40
09:53:58 Set A/D channel type result=40
09:53:58 Set A/D encoding result=40
09:53:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:53:58 Set channel filter=0.000000e+000  result=40
09:53:58 Config A/D  Result=40
09:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:53:58 Get A/D filter: -9.255963e+061  result=40
09:53:58 Get A/D value=-858993460  result=40
09:53:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:53:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:53:58 Parameters OK
09:53:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:53:58 Set A/D data flow result=40
09:53:58 Set A/D channel type result=40
09:53:58 Set A/D encoding result=40
09:53:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:53:58 Set channel filter=0.000000e+000  result=40
09:53:58 Config A/D  Result=40
09:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:53:58 Get A/D filter: -9.255963e+061  result=40
09:53:58 Get A/D value=-858993460  result=40
09:53:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:53:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:53:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:53:58 Aux=
09:53:58 Message to Camera, serial 189763 queued
09:54:35 Received message from Master: op=PointingHead serial=189776
09:54:35 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
09:54:35 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
09:54:35 Point started: ret=0
09:54:35 point_skyscan result=0
09:54:36 Check angles
09:54:36 SkyScan query
09:54:36 SkyScan query done: ret=0  az=135.87<-9058  ze=-6.51<-12434  Statuses=0009 0008
09:54:36 Msec=0  True Az=135.87  Ze=-6.51  Az status=0009  Ze status=0008
09:54:37 Check angles
09:54:37 SkyScan query
09:54:37 SkyScan query done: ret=0  az=153.645<-10243  ze=-6.495<-12433  Statuses=0009 0008
[UTC 2019-3-9  09:54:37]
09:54:37 Msec=750  True Az=153.645  Ze=-6.495  Az status=0009  Ze status=0008
09:54:37 Check angles
09:54:37 SkyScan query
09:54:38 SkyScan query done: ret=0  az=171.525<-11435  ze=-6.495<-12433  Statuses=0009 0008
09:54:38 Msec=1500  True Az=171.525  Ze=-6.495  Az status=0009  Ze status=0008
09:54:38 Check angles
09:54:38 SkyScan query
09:54:39 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:54:39 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
09:54:39 Message to Master queued w/err=0: serial=189776 error=0
09:54:44 Received message from Master: op=Filter serial=189777
09:54:44 Color wheel filter change from 0 to 0
09:54:44 FLIGetFilterPos err=0  currentPosition=0
09:54:44 FLIGetStepsRemaining err=0  RemainingSteps=0
09:54:44 Filter is already there-color wheel unchanged
09:54:44 Received message from Master: op=Shutter serial=189778
09:54:44 Shutter LASER close
09:54:44 Received message from Camera: op=State serial=189780
09:54:44 GetSingleValue result=40  Value=cccccccc
09:54:44 SkyScan query
09:54:44 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
09:54:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:54:44 Parameters OK
09:54:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:54:44 Set A/D data flow result=40
09:54:44 Set A/D channel type result=40
09:54:44 Set A/D encoding result=40
09:54:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:54:44 Set channel filter=0.000000e+000  result=40
09:54:44 Config A/D  Result=40
09:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:54:44 Get A/D filter: -9.255963e+061  result=40
09:54:44 Get A/D value=-858993460  result=40
09:54:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:54:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:54:44 Parameters OK
09:54:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:54:44 Set A/D data flow result=40
09:54:44 Set A/D channel type result=40
09:54:44 Set A/D encoding result=40
09:54:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:54:44 Set channel filter=0.000000e+000  result=40
09:54:44 Config A/D  Result=40
09:54:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:54:44 Get A/D filter: -9.255963e+061  result=40
09:54:44 Get A/D value=-858993460  result=40
09:54:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:54:44 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:54:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:54:44 Aux=
09:54:44 Message to Camera, serial 189780 queued
09:55:21 Received message from Master: op=PointingHead serial=189793
09:55:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:55:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:55:22 Point started: ret=0
09:55:22 point_skyscan result=0
09:55:22 Check angles
09:55:22 SkyScan query
09:55:23 SkyScan query done: ret=0  az=152.97<-10198  ze=6.51<-11566  Statuses=0009 0008
09:55:23 Msec=0  True Az=152.97  Ze=6.51  Az status=0009  Ze status=0008
09:55:23 Check angles
09:55:23 SkyScan query
09:55:24 SkyScan query done: ret=0  az=135.525<-9035  ze=6.495<-11567  Statuses=0009 0008
09:55:24 Msec=750  True Az=135.525  Ze=6.495  Az status=0009  Ze status=0008
09:55:24 Check angles
09:55:24 SkyScan query
09:55:24 SkyScan query done: ret=0  az=117.675<-7845  ze=6.495<-11567  Statuses=0009 0008
09:55:24 Msec=1500  True Az=117.675  Ze=6.495  Az status=0009  Ze status=0008
09:55:25 Check angles
09:55:25 SkyScan query
09:55:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:55:25 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:55:25 Message to Master queued w/err=0: serial=189793 error=0
09:55:30 Received message from Master: op=Filter serial=189794
09:55:30 Color wheel filter change from 0 to 0
09:55:30 FLIGetFilterPos err=0  currentPosition=0
09:55:30 FLIGetStepsRemaining err=0  RemainingSteps=0
09:55:30 Filter is already there-color wheel unchanged
09:55:30 Received message from Master: op=Shutter serial=189795
09:55:30 Shutter LASER close
09:55:30 Received message from Camera: op=State serial=189797
09:55:30 GetSingleValue result=40  Value=cccccccc
09:55:30 SkyScan query
09:55:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:55:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:55:31 Parameters OK
09:55:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:55:31 Set A/D data flow result=40
09:55:31 Set A/D channel type result=40
09:55:31 Set A/D encoding result=40
09:55:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:55:31 Set channel filter=0.000000e+000  result=40
09:55:31 Config A/D  Result=40
09:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:55:31 Get A/D filter: -9.255963e+061  result=40
09:55:31 Get A/D value=-858993460  result=40
09:55:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:55:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:55:31 Parameters OK
09:55:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:55:31 Set A/D data flow result=40
09:55:31 Set A/D channel type result=40
09:55:31 Set A/D encoding result=40
09:55:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:55:31 Set channel filter=0.000000e+000  result=40
09:55:31 Config A/D  Result=40
09:55:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:55:31 Get A/D filter: -9.255963e+061  result=40
09:55:31 Get A/D value=-858993460  result=40
09:55:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:55:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:55:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:55:31 Aux=
09:55:31 Message to Camera, serial 189797 queued
09:56:08 Received message from Master: op=PointingHead serial=189810
09:56:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:56:08 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:56:08 Point started: ret=0
09:56:08 point_skyscan result=0
09:56:09 Check angles
09:56:09 SkyScan query
09:56:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
09:56:10 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
09:56:10 Check angles
09:56:10 SkyScan query
09:56:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
09:56:10 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
09:56:10 Check angles
09:56:10 SkyScan query
09:56:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.95<-16330  Statuses=0008 0009
09:56:11 Msec=1500  True Az=112.995  Ze=-64.95  Az status=0008  Ze status=0009
09:56:11 Check angles
09:56:11 SkyScan query
09:56:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.92<-17728  Statuses=0008 0009
09:56:12 Msec=2250  True Az=112.995  Ze=-85.92  Az status=0008  Ze status=0009
09:56:12 Check angles
09:56:12 SkyScan query
09:56:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.845<-19123  Statuses=0008 0009
09:56:13 Msec=3000  True Az=112.995  Ze=-106.845  Az status=0008  Ze status=0009
09:56:13 Check angles
09:56:13 SkyScan query
09:56:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.815<-20521  Statuses=0008 0009
09:56:13 Msec=3750  True Az=112.995  Ze=-127.815  Az status=0008  Ze status=0009
09:56:13 Check angles
09:56:13 SkyScan query
09:56:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.755<-21917  Statuses=0008 0009
09:56:14 Msec=4500  True Az=112.995  Ze=-148.755  Az status=0008  Ze status=0009
09:56:14 Check angles
09:56:14 SkyScan query
09:56:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.71<-23314  Statuses=0008 0009
09:56:15 Msec=5250  True Az=112.995  Ze=-169.71  Az status=0008  Ze status=0009
09:56:15 Check angles
09:56:15 SkyScan query
09:56:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:56:16 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:56:16 Message to Master queued w/err=0: serial=189810 error=0
09:56:21 Received message from Master: op=Filter serial=189811
09:56:21 Color wheel filter change from 0 to 0
09:56:21 FLIGetFilterPos err=0  currentPosition=0
09:56:21 FLIGetStepsRemaining err=0  RemainingSteps=0
09:56:21 Filter is already there-color wheel unchanged
09:56:21 Received message from Master: op=Shutter serial=189812
09:56:21 Shutter LASER open
09:56:21 Received message from Camera: op=State serial=189814
09:56:21 GetSingleValue result=40  Value=cccccccc
09:56:21 SkyScan query
09:56:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:56:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:56:21 Parameters OK
09:56:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:56:21 Set A/D data flow result=40
09:56:21 Set A/D channel type result=40
09:56:21 Set A/D encoding result=40
09:56:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:56:21 Set channel filter=0.000000e+000  result=40
09:56:21 Config A/D  Result=40
09:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:56:21 Get A/D filter: -9.255963e+061  result=40
09:56:21 Get A/D value=-858993460  result=40
09:56:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:56:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:56:21 Parameters OK
09:56:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:56:21 Set A/D data flow result=40
09:56:21 Set A/D channel type result=40
09:56:21 Set A/D encoding result=40
09:56:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:56:21 Set channel filter=0.000000e+000  result=40
09:56:21 Config A/D  Result=40
09:56:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:56:21 Get A/D filter: -9.255963e+061  result=40
09:56:21 Get A/D value=-858993460  result=40
09:56:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:56:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:56:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:56:21 Aux=
09:56:21 Message to Camera, serial 189814 queued
09:56:30 Received message from Master: op=Shutter serial=189824
09:56:30 Shutter LASER close
09:56:30 Received message from Master: op=PointingHead serial=189828
09:56:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:56:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:56:31 Point started: ret=0
09:56:31 point_skyscan result=0
09:56:31 Check angles
09:56:31 SkyScan query
09:56:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
09:56:32 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
09:56:32 Check angles
09:56:32 SkyScan query
09:56:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.28<-20152  Statuses=0008 0009
09:56:33 Msec=750  True Az=112.995  Ze=-122.28  Az status=0008  Ze status=0009
09:56:33 Check angles
09:56:33 SkyScan query
09:56:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.325<-18755  Statuses=0008 0009
09:56:34 Msec=1500  True Az=112.995  Ze=-101.325  Az status=0008  Ze status=0009
09:56:34 Check angles
09:56:34 SkyScan query
09:56:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.355<-17357  Statuses=0008 0009
09:56:34 Msec=2250  True Az=112.995  Ze=-80.355  Az status=0008  Ze status=0009
09:56:34 Check angles
09:56:34 SkyScan query
09:56:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.415<-15961  Statuses=0008 0009
09:56:35 Msec=3000  True Az=112.995  Ze=-59.415  Az status=0008  Ze status=0009
09:56:35 Check angles
09:56:35 SkyScan query
09:56:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.445<-14563  Statuses=0008 0009
09:56:36 Msec=3750  True Az=112.995  Ze=-38.445  Az status=0008  Ze status=0009
09:56:36 Check angles
09:56:36 SkyScan query
09:56:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.505<-13167  Statuses=0008 0009
09:56:37 Msec=4500  True Az=112.995  Ze=-17.505  Az status=0008  Ze status=0009
09:56:37 Check angles
09:56:37 SkyScan query
09:56:37 SkyScan query done: ret=0  az=112.995<-7533  ze=3.465<-11769  Statuses=0008 0009
09:56:37 Msec=5250  True Az=112.995  Ze=3.465  Az status=0008  Ze status=0009
09:56:37 Check angles
09:56:37 SkyScan query
09:56:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
09:56:38 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
09:56:38 Message to Master queued w/err=0: serial=189828 error=0
09:56:43 Received message from Master: op=Filter serial=189829
09:56:43 Color wheel filter change from 0 to 0
09:56:43 FLIGetFilterPos err=0  currentPosition=0
09:56:43 FLIGetStepsRemaining err=0  RemainingSteps=0
09:56:43 Filter is already there-color wheel unchanged
09:56:43 Received message from Master: op=Shutter serial=189830
09:56:43 Shutter LASER close
09:56:43 Received message from Camera: op=State serial=189832
09:56:43 GetSingleValue result=40  Value=cccccccc
09:56:43 SkyScan query
09:56:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:56:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:56:44 Parameters OK
09:56:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:56:44 Set A/D data flow result=40
09:56:44 Set A/D channel type result=40
09:56:44 Set A/D encoding result=40
09:56:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:56:44 Set channel filter=0.000000e+000  result=40
09:56:44 Config A/D  Result=40
09:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:56:44 Get A/D filter: -9.255963e+061  result=40
09:56:44 Get A/D value=-858993460  result=40
09:56:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:56:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:56:44 Parameters OK
09:56:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:56:44 Set A/D data flow result=40
09:56:44 Set A/D channel type result=40
09:56:44 Set A/D encoding result=40
09:56:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:56:44 Set channel filter=0.000000e+000  result=40
09:56:44 Config A/D  Result=40
09:56:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:56:44 Get A/D filter: -9.255963e+061  result=40
09:56:44 Get A/D value=-858993460  result=40
09:56:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:56:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:56:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:56:44 Aux=
09:56:44 Message to Camera, serial 189832 queued
09:57:21 Received message from Master: op=PointingHead serial=189845
09:57:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:57:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:57:21 Point started: ret=0
09:57:21 point_skyscan result=0
09:57:22 Check angles
09:57:22 SkyScan query
09:57:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:57:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:57:22 Message to Master queued w/err=0: serial=189845 error=0
09:57:27 Received message from Master: op=Filter serial=189846
09:57:27 Color wheel filter change from 0 to 0
09:57:27 FLIGetFilterPos err=0  currentPosition=0
09:57:27 FLIGetStepsRemaining err=0  RemainingSteps=0
09:57:27 Filter is already there-color wheel unchanged
09:57:28 Received message from Master: op=Shutter serial=189847
09:57:28 Shutter LASER close
09:57:28 Received message from Camera: op=State serial=189849
09:57:28 GetSingleValue result=40  Value=cccccccc
09:57:28 SkyScan query
09:57:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:57:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:57:28 Parameters OK
09:57:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:57:28 Set A/D data flow result=40
09:57:28 Set A/D channel type result=40
09:57:28 Set A/D encoding result=40
09:57:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:57:28 Set channel filter=0.000000e+000  result=40
09:57:28 Config A/D  Result=40
09:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:57:28 Get A/D filter: -9.255963e+061  result=40
09:57:28 Get A/D value=-858993460  result=40
09:57:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:57:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:57:28 Parameters OK
09:57:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:57:28 Set A/D data flow result=40
09:57:28 Set A/D channel type result=40
09:57:28 Set A/D encoding result=40
09:57:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:57:28 Set channel filter=0.000000e+000  result=40
09:57:28 Config A/D  Result=40
09:57:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:57:28 Get A/D filter: -9.255963e+061  result=40
09:57:28 Get A/D value=-858993460  result=40
09:57:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:57:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:57:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:57:28 Aux=
09:57:28 Message to Camera, serial 189849 queued
09:58:05 Received message from Master: op=PointingHead serial=189862
09:58:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:58:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:58:05 Point started: ret=0
09:58:05 point_skyscan result=0
09:58:06 Check angles
09:58:06 SkyScan query
09:58:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:58:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:58:07 Message to Master queued w/err=0: serial=189862 error=0
09:58:12 Received message from Master: op=Filter serial=189863
09:58:12 Color wheel filter change from 0 to 0
09:58:12 FLIGetFilterPos err=0  currentPosition=0
09:58:12 FLIGetStepsRemaining err=0  RemainingSteps=0
09:58:12 Filter is already there-color wheel unchanged
09:58:12 Received message from Master: op=Shutter serial=189864
09:58:12 Shutter LASER close
09:58:12 Received message from Camera: op=State serial=189866
09:58:12 GetSingleValue result=40  Value=cccccccc
09:58:12 SkyScan query
09:58:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:58:13 Parameters OK
09:58:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:58:13 Set A/D data flow result=40
09:58:13 Set A/D channel type result=40
09:58:13 Set A/D encoding result=40
09:58:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:58:13 Set channel filter=0.000000e+000  result=40
09:58:13 Config A/D  Result=40
09:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:58:13 Get A/D filter: -9.255963e+061  result=40
09:58:13 Get A/D value=-858993460  result=40
09:58:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:58:13 Parameters OK
09:58:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:58:13 Set A/D data flow result=40
09:58:13 Set A/D channel type result=40
09:58:13 Set A/D encoding result=40
09:58:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:58:13 Set channel filter=0.000000e+000  result=40
09:58:13 Config A/D  Result=40
09:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:58:13 Get A/D filter: -9.255963e+061  result=40
09:58:13 Get A/D value=-858993460  result=40
09:58:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:58:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:58:13 Aux=
09:58:13 Message to Camera, serial 189866 queued
09:58:49 Received message from Master: op=PointingHead serial=189879
09:58:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:58:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:58:50 Point started: ret=0
09:58:50 point_skyscan result=0
09:58:50 Check angles
09:58:50 SkyScan query
09:58:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:58:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
09:58:51 Message to Master queued w/err=0: serial=189879 error=0
09:58:56 Received message from Master: op=Filter serial=189880
09:58:56 Color wheel filter change from 0 to 0
09:58:56 FLIGetFilterPos err=0  currentPosition=0
09:58:56 FLIGetStepsRemaining err=0  RemainingSteps=0
09:58:56 Filter is already there-color wheel unchanged
09:58:56 Received message from Master: op=Shutter serial=189881
09:58:56 Shutter LASER close
09:58:56 Received message from Camera: op=State serial=189883
09:58:56 GetSingleValue result=40  Value=cccccccc
09:58:56 SkyScan query
09:58:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
09:58:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:58:57 Parameters OK
09:58:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:58:57 Set A/D data flow result=40
09:58:57 Set A/D channel type result=40
09:58:57 Set A/D encoding result=40
09:58:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:58:57 Set channel filter=0.000000e+000  result=40
09:58:57 Config A/D  Result=40
09:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:58:57 Get A/D filter: -9.255963e+061  result=40
09:58:57 Get A/D value=-858993460  result=40
09:58:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:58:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:58:57 Parameters OK
09:58:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:58:57 Set A/D data flow result=40
09:58:57 Set A/D channel type result=40
09:58:57 Set A/D encoding result=40
09:58:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:58:57 Set channel filter=0.000000e+000  result=40
09:58:57 Config A/D  Result=40
09:58:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:58:57 Get A/D filter: -9.255963e+061  result=40
09:58:57 Get A/D value=-858993460  result=40
09:58:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:58:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:58:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:58:57 Aux=
09:58:57 Message to Camera, serial 189883 queued
09:59:34 Received message from Master: op=PointingHead serial=189896
09:59:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
09:59:34 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
09:59:34 Point started: ret=0
09:59:34 point_skyscan result=0
09:59:35 Check angles
09:59:35 SkyScan query
09:59:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.595<-13573  Statuses=0008 0009
09:59:35 Msec=0  True Az=112.995  Ze=-23.595  Az status=0008  Ze status=0009
09:59:36 Check angles
09:59:36 SkyScan query
09:59:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.55<-14970  Statuses=0008 0009
09:59:36 Msec=750  True Az=112.995  Ze=-44.55  Az status=0008  Ze status=0009
09:59:36 Check angles
09:59:36 SkyScan query
09:59:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
09:59:37 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
09:59:37 Check angles
09:59:37 SkyScan query
09:59:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.475<-17765  Statuses=0008 0009
09:59:38 Msec=2250  True Az=112.995  Ze=-86.475  Az status=0008  Ze status=0009
09:59:38 Check angles
09:59:38 SkyScan query
09:59:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.43<-19162  Statuses=0008 0009
09:59:38 Msec=3000  True Az=112.995  Ze=-107.43  Az status=0008  Ze status=0009
09:59:39 Check angles
09:59:39 SkyScan query
09:59:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.79<-20586  Statuses=0008 0009
09:59:39 Msec=3750  True Az=112.995  Ze=-128.79  Az status=0008  Ze status=0009
09:59:39 Check angles
09:59:39 SkyScan query
09:59:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.76<-21984  Statuses=0008 0009
09:59:40 Msec=4500  True Az=112.995  Ze=-149.76  Az status=0008  Ze status=0009
09:59:40 Check angles
09:59:40 SkyScan query
09:59:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.67<-23378  Statuses=0008 0009
09:59:41 Msec=5250  True Az=112.995  Ze=-170.67  Az status=0008  Ze status=0009
09:59:41 Check angles
09:59:41 SkyScan query
09:59:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
09:59:41 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
09:59:41 Message to Master queued w/err=0: serial=189896 error=0
09:59:46 Received message from Master: op=Filter serial=189897
09:59:46 Color wheel filter change from 0 to 0
09:59:46 FLIGetFilterPos err=0  currentPosition=0
09:59:46 FLIGetStepsRemaining err=0  RemainingSteps=0
09:59:46 Filter is already there-color wheel unchanged
09:59:47 Received message from Master: op=Shutter serial=189898
09:59:47 Shutter LASER open
09:59:47 Received message from Camera: op=State serial=189900
09:59:47 GetSingleValue result=40  Value=cccccccc
09:59:47 SkyScan query
09:59:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
09:59:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:59:47 Parameters OK
09:59:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:59:47 Set A/D data flow result=40
09:59:47 Set A/D channel type result=40
09:59:47 Set A/D encoding result=40
09:59:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:59:47 Set channel filter=0.000000e+000  result=40
09:59:47 Config A/D  Result=40
09:59:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:59:47 Get A/D filter: -9.255963e+061  result=40
09:59:47 Get A/D value=-858993460  result=40
09:59:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:59:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
09:59:47 Parameters OK
09:59:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
09:59:47 Set A/D data flow result=40
09:59:47 Set A/D channel type result=40
09:59:47 Set A/D encoding result=40
09:59:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
09:59:47 Set channel filter=0.000000e+000  result=40
09:59:47 Config A/D  Result=40
09:59:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
09:59:47 Get A/D filter: -9.255963e+061  result=40
09:59:47 Get A/D value=-858993460  result=40
09:59:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
09:59:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
09:59:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
09:59:47 Aux=
09:59:47 Message to Camera, serial 189900 queued
09:59:56 Received message from Master: op=Shutter serial=189910
09:59:56 Shutter LASER close
09:59:56 Received message from Master: op=PointingHead serial=189914
09:59:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
09:59:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
09:59:57 Point started: ret=0
09:59:57 point_skyscan result=0
09:59:57 Check angles
09:59:57 SkyScan query
09:59:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.055<-21537  Statuses=0008 0009
09:59:58 Msec=0  True Az=112.995  Ze=-143.055  Az status=0008  Ze status=0009
09:59:58 Check angles
09:59:58 SkyScan query
09:59:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.1<-20140  Statuses=0008 0009
09:59:59 Msec=750  True Az=112.995  Ze=-122.1  Az status=0008  Ze status=0009
09:59:59 Check angles
09:59:59 SkyScan query
10:00:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
10:00:00 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
10:00:00 Check angles
10:00:00 SkyScan query
10:00:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.32<-17288  Statuses=0008 0009
10:00:00 Msec=2250  True Az=112.995  Ze=-79.32  Az status=0008  Ze status=0009
10:00:01 Check angles
10:00:01 SkyScan query
10:00:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.35<-15890  Statuses=0008 0009
10:00:01 Msec=3000  True Az=112.995  Ze=-58.35  Az status=0008  Ze status=0009
10:00:01 Check angles
10:00:01 SkyScan query
10:00:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.425<-14495  Statuses=0008 0009
10:00:02 Msec=3750  True Az=112.995  Ze=-37.425  Az status=0008  Ze status=0009
10:00:02 Check angles
10:00:02 SkyScan query
10:00:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.44<-13096  Statuses=0008 0009
10:00:03 Msec=4500  True Az=112.995  Ze=-16.44  Az status=0008  Ze status=0009
10:00:03 Check angles
10:00:03 SkyScan query
10:00:03 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
10:00:03 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
10:00:04 Check angles
10:00:04 SkyScan query
10:00:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:00:04 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:00:04 Message to Master queued w/err=0: serial=189914 error=0
10:00:09 Received message from Master: op=Filter serial=189915
10:00:09 Color wheel filter change from 0 to 0
10:00:09 FLIGetFilterPos err=0  currentPosition=0
10:00:09 FLIGetStepsRemaining err=0  RemainingSteps=0
10:00:09 Filter is already there-color wheel unchanged
10:00:09 Received message from Master: op=Shutter serial=189916
10:00:09 Shutter LASER close
10:00:09 Received message from Camera: op=State serial=189918
10:00:09 GetSingleValue result=40  Value=cccccccc
10:00:09 SkyScan query
10:00:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:00:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:00:10 Parameters OK
10:00:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:00:10 Set A/D data flow result=40
10:00:10 Set A/D channel type result=40
10:00:10 Set A/D encoding result=40
10:00:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:00:10 Set channel filter=0.000000e+000  result=40
10:00:10 Config A/D  Result=40
10:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:00:10 Get A/D filter: -9.255963e+061  result=40
10:00:10 Get A/D value=-858993460  result=40
10:00:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:00:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:00:10 Parameters OK
10:00:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:00:10 Set A/D data flow result=40
10:00:10 Set A/D channel type result=40
10:00:10 Set A/D encoding result=40
10:00:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:00:10 Set channel filter=0.000000e+000  result=40
10:00:10 Config A/D  Result=40
10:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:00:10 Get A/D filter: -9.255963e+061  result=40
10:00:10 Get A/D value=-858993460  result=40
10:00:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:00:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:00:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:00:10 Aux=
10:00:10 Message to Camera, serial 189918 queued
10:00:47 Received message from Master: op=PointingHead serial=189931
10:00:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:00:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:00:47 Point started: ret=0
10:00:47 point_skyscan result=0
10:00:48 Check angles
10:00:48 SkyScan query
10:00:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:00:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:00:49 Message to Master queued w/err=0: serial=189931 error=0
10:00:54 Received message from Master: op=Filter serial=189932
10:00:54 Color wheel filter change from 0 to 0
10:00:54 FLIGetFilterPos err=0  currentPosition=0
10:00:54 FLIGetStepsRemaining err=0  RemainingSteps=0
10:00:54 Filter is already there-color wheel unchanged
10:00:54 Received message from Master: op=Shutter serial=189933
10:00:54 Shutter LASER close
10:00:54 Received message from Camera: op=State serial=189935
10:00:54 GetSingleValue result=40  Value=cccccccc
10:00:54 SkyScan query
10:00:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:00:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:00:54 Parameters OK
10:00:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:00:54 Set A/D data flow result=40
10:00:54 Set A/D channel type result=40
10:00:54 Set A/D encoding result=40
10:00:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:00:54 Set channel filter=0.000000e+000  result=40
10:00:54 Config A/D  Result=40
10:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:00:54 Get A/D filter: -9.255963e+061  result=40
10:00:54 Get A/D value=-858993460  result=40
10:00:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:00:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:00:54 Parameters OK
10:00:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:00:54 Set A/D data flow result=40
10:00:54 Set A/D channel type result=40
10:00:54 Set A/D encoding result=40
10:00:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:00:54 Set channel filter=0.000000e+000  result=40
10:00:54 Config A/D  Result=40
10:00:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:00:54 Get A/D filter: -9.255963e+061  result=40
10:00:54 Get A/D value=-858993460  result=40
10:00:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:00:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:00:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:00:54 Aux=
10:00:54 Message to Camera, serial 189935 queued
10:01:31 Received message from Master: op=PointingHead serial=189948
10:01:31 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:01:31 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:01:32 Point started: ret=0
10:01:32 point_skyscan result=0
10:01:32 Check angles
10:01:32 SkyScan query
10:01:33 SkyScan query done: ret=0  az=136.14<-9076  ze=-6.51<-12434  Statuses=0009 0008
10:01:33 Msec=0  True Az=136.14  Ze=-6.51  Az status=0009  Ze status=0008
10:01:33 Check angles
10:01:33 SkyScan query
10:01:34 SkyScan query done: ret=0  az=153.66<-10244  ze=-6.495<-12433  Statuses=0009 0008
10:01:34 Msec=750  True Az=153.66  Ze=-6.495  Az status=0009  Ze status=0008
10:01:34 Check angles
10:01:34 SkyScan query
10:01:34 SkyScan query done: ret=0  az=171.12<-11408  ze=-6.495<-12433  Statuses=0009 0008
10:01:34 Msec=1500  True Az=171.12  Ze=-6.495  Az status=0009  Ze status=0008
10:01:35 Check angles
10:01:35 SkyScan query
10:01:35 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:01:35 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:01:35 Message to Master queued w/err=0: serial=189948 error=0
10:01:40 Received message from Master: op=Filter serial=189949
10:01:40 Color wheel filter change from 0 to 0
10:01:40 FLIGetFilterPos err=0  currentPosition=0
10:01:40 FLIGetStepsRemaining err=0  RemainingSteps=0
10:01:40 Filter is already there-color wheel unchanged
10:01:40 Received message from Master: op=Shutter serial=189950
10:01:40 Shutter LASER close
10:01:40 Received message from Camera: op=State serial=189952
10:01:40 GetSingleValue result=40  Value=cccccccc
10:01:40 SkyScan query
10:01:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:01:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:01:41 Parameters OK
10:01:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:01:41 Set A/D data flow result=40
10:01:41 Set A/D channel type result=40
10:01:41 Set A/D encoding result=40
10:01:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:01:41 Set channel filter=0.000000e+000  result=40
10:01:41 Config A/D  Result=40
10:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:01:41 Get A/D filter: -9.255963e+061  result=40
10:01:41 Get A/D value=-858993460  result=40
10:01:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:01:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:01:41 Parameters OK
10:01:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:01:41 Set A/D data flow result=40
10:01:41 Set A/D channel type result=40
10:01:41 Set A/D encoding result=40
10:01:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:01:41 Set channel filter=0.000000e+000  result=40
10:01:41 Config A/D  Result=40
10:01:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:01:41 Get A/D filter: -9.255963e+061  result=40
10:01:41 Get A/D value=-858993460  result=40
10:01:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:01:41 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:01:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:01:41 Aux=
10:01:41 Message to Camera, serial 189952 queued
10:02:18 Received message from Master: op=PointingHead serial=189965
10:02:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:02:18 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:02:18 Point started: ret=0
10:02:18 point_skyscan result=0
10:02:19 Check angles
10:02:19 SkyScan query
10:02:19 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
10:02:19 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
10:02:20 Check angles
10:02:20 SkyScan query
10:02:20 SkyScan query done: ret=0  az=135.33<-9022  ze=6.495<-11567  Statuses=0009 0008
10:02:20 Msec=750  True Az=135.33  Ze=6.495  Az status=0009  Ze status=0008
10:02:20 Check angles
10:02:20 SkyScan query
10:02:21 SkyScan query done: ret=0  az=117.525<-7835  ze=6.495<-11567  Statuses=0009 0008
10:02:21 Msec=1500  True Az=117.525  Ze=6.495  Az status=0009  Ze status=0008
10:02:21 Check angles
10:02:21 SkyScan query
10:02:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:02:22 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:02:22 Message to Master queued w/err=0: serial=189965 error=0
10:02:27 Received message from Master: op=Filter serial=189966
10:02:27 Color wheel filter change from 0 to 0
10:02:27 FLIGetFilterPos err=0  currentPosition=0
10:02:27 FLIGetStepsRemaining err=0  RemainingSteps=0
10:02:27 Filter is already there-color wheel unchanged
10:02:27 Received message from Master: op=Shutter serial=189967
10:02:27 Shutter LASER close
10:02:27 Received message from Camera: op=State serial=189969
10:02:27 GetSingleValue result=40  Value=cccccccc
10:02:27 SkyScan query
10:02:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:02:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:02:27 Parameters OK
10:02:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:02:27 Set A/D data flow result=40
10:02:27 Set A/D channel type result=40
10:02:27 Set A/D encoding result=40
10:02:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:02:27 Set channel filter=0.000000e+000  result=40
10:02:27 Config A/D  Result=40
10:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:02:27 Get A/D filter: -9.255963e+061  result=40
10:02:27 Get A/D value=-858993460  result=40
10:02:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:02:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:02:27 Parameters OK
10:02:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:02:27 Set A/D data flow result=40
10:02:27 Set A/D channel type result=40
10:02:27 Set A/D encoding result=40
10:02:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:02:27 Set channel filter=0.000000e+000  result=40
10:02:27 Config A/D  Result=40
10:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:02:27 Get A/D filter: -9.255963e+061  result=40
10:02:27 Get A/D value=-858993460  result=40
10:02:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:02:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:02:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:02:27 Aux=
10:02:27 Message to Camera, serial 189969 queued
10:03:04 Received message from Master: op=PointingHead serial=189982
10:03:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:03:04 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:03:05 Point started: ret=0
10:03:05 point_skyscan result=0
10:03:05 Check angles
10:03:05 SkyScan query
10:03:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
10:03:06 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
10:03:06 Check angles
10:03:06 SkyScan query
10:03:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.13<-14942  Statuses=0008 0009
10:03:07 Msec=750  True Az=112.995  Ze=-44.13  Az status=0008  Ze status=0009
10:03:07 Check angles
10:03:07 SkyScan query
10:03:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.07<-16338  Statuses=0008 0009
10:03:07 Msec=1500  True Az=112.995  Ze=-65.07  Az status=0008  Ze status=0009
10:03:08 Check angles
10:03:08 SkyScan query
10:03:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.04<-17736  Statuses=0008 0009
10:03:08 Msec=2250  True Az=112.995  Ze=-86.04  Az status=0008  Ze status=0009
10:03:08 Check angles
10:03:08 SkyScan query
10:03:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.98<-19132  Statuses=0008 0009
10:03:09 Msec=3000  True Az=112.995  Ze=-106.98  Az status=0008  Ze status=0009
10:03:09 Check angles
10:03:09 SkyScan query
10:03:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
10:03:10 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
10:03:10 Check angles
10:03:10 SkyScan query
10:03:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.89<-21926  Statuses=0008 0009
10:03:10 Msec=4500  True Az=112.995  Ze=-148.89  Az status=0008  Ze status=0009
10:03:11 Check angles
10:03:11 SkyScan query
10:03:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.83<-23322  Statuses=0008 0009
10:03:11 Msec=5250  True Az=112.995  Ze=-169.83  Az status=0008  Ze status=0009
10:03:11 Check angles
10:03:11 SkyScan query
10:03:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:03:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:03:12 Message to Master queued w/err=0: serial=189982 error=0
10:03:17 Received message from Master: op=Filter serial=189983
10:03:17 Color wheel filter change from 0 to 0
10:03:17 FLIGetFilterPos err=0  currentPosition=0
10:03:17 FLIGetStepsRemaining err=0  RemainingSteps=0
10:03:17 Filter is already there-color wheel unchanged
10:03:17 Received message from Master: op=Shutter serial=189984
10:03:17 Shutter LASER open
10:03:17 Received message from Camera: op=State serial=189986
10:03:17 GetSingleValue result=40  Value=cccccccc
10:03:17 SkyScan query
10:03:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:03:18 Parameters OK
10:03:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:03:18 Set A/D data flow result=40
10:03:18 Set A/D channel type result=40
10:03:18 Set A/D encoding result=40
10:03:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:03:18 Set channel filter=0.000000e+000  result=40
10:03:18 Config A/D  Result=40
10:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:03:18 Get A/D filter: -9.255963e+061  result=40
10:03:18 Get A/D value=-858993460  result=40
10:03:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:03:18 Parameters OK
10:03:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:03:18 Set A/D data flow result=40
10:03:18 Set A/D channel type result=40
10:03:18 Set A/D encoding result=40
10:03:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:03:18 Set channel filter=0.000000e+000  result=40
10:03:18 Config A/D  Result=40
10:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:03:18 Get A/D filter: -9.255963e+061  result=40
10:03:18 Get A/D value=-858993460  result=40
10:03:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:03:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:03:18 Aux=
10:03:18 Message to Camera, serial 189986 queued
10:03:26 Received message from Master: op=Shutter serial=189996
10:03:26 Shutter LASER close
10:03:27 Received message from Master: op=PointingHead serial=190000
10:03:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:03:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:03:27 Point started: ret=0
10:03:27 point_skyscan result=0
10:03:28 Check angles
10:03:28 SkyScan query
10:03:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
10:03:28 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
10:03:29 Check angles
10:03:29 SkyScan query
10:03:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.13<-20142  Statuses=0008 0009
10:03:29 Msec=750  True Az=112.995  Ze=-122.13  Az status=0008  Ze status=0009
10:03:29 Check angles
10:03:29 SkyScan query
10:03:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
10:03:30 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
10:03:30 Check angles
10:03:30 SkyScan query
10:03:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.815<-17321  Statuses=0008 0009
10:03:31 Msec=2250  True Az=112.995  Ze=-79.815  Az status=0008  Ze status=0009
10:03:31 Check angles
10:03:31 SkyScan query
10:03:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
10:03:31 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
10:03:32 Check angles
10:03:32 SkyScan query
10:03:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.875<-14525  Statuses=0008 0009
10:03:32 Msec=3750  True Az=112.995  Ze=-37.875  Az status=0008  Ze status=0009
10:03:32 Check angles
10:03:32 SkyScan query
10:03:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.935<-13129  Statuses=0008 0009
10:03:33 Msec=4500  True Az=112.995  Ze=-16.935  Az status=0008  Ze status=0009
10:03:33 Check angles
10:03:33 SkyScan query
10:03:34 SkyScan query done: ret=0  az=112.995<-7533  ze=4.005<-11733  Statuses=0008 0009
10:03:34 Msec=5250  True Az=112.995  Ze=4.005  Az status=0008  Ze status=0009
10:03:34 Check angles
10:03:34 SkyScan query
10:03:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:03:34 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:03:34 Message to Master queued w/err=0: serial=190000 error=0
10:03:36 Received message from Master: op=Identify serial=190001
10:03:39 Received message from Master: op=Filter serial=190004
10:03:39 Color wheel filter change from 0 to 0
10:03:39 FLIGetFilterPos err=0  currentPosition=0
10:03:39 FLIGetStepsRemaining err=0  RemainingSteps=0
10:03:39 Filter is already there-color wheel unchanged
10:03:40 Received message from Master: op=Shutter serial=190005
10:03:40 Shutter LASER close
10:03:40 Received message from Camera: op=State serial=190007
10:03:40 GetSingleValue result=40  Value=cccccccc
10:03:40 SkyScan query
10:03:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:03:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:03:40 Parameters OK
10:03:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:03:40 Set A/D data flow result=40
10:03:40 Set A/D channel type result=40
10:03:40 Set A/D encoding result=40
10:03:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:03:40 Set channel filter=0.000000e+000  result=40
10:03:40 Config A/D  Result=40
10:03:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:03:40 Get A/D filter: -9.255963e+061  result=40
10:03:40 Get A/D value=-858993460  result=40
10:03:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:03:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:03:40 Parameters OK
10:03:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:03:40 Set A/D data flow result=40
10:03:40 Set A/D channel type result=40
10:03:40 Set A/D encoding result=40
10:03:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:03:40 Set channel filter=0.000000e+000  result=40
10:03:40 Config A/D  Result=40
10:03:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:03:40 Get A/D filter: -9.255963e+061  result=40
10:03:40 Get A/D value=-858993460  result=40
10:03:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:03:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:03:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:03:40 Aux=
10:03:40 Message to Camera, serial 190007 queued
[UTC 2019-3-9  10:03:48]
10:04:17 Received message from Master: op=PointingHead serial=190020
10:04:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:04:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:04:17 Point started: ret=0
10:04:17 point_skyscan result=0
10:04:18 Check angles
10:04:18 SkyScan query
10:04:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:04:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:04:19 Message to Master queued w/err=0: serial=190020 error=0
10:04:24 Received message from Master: op=Filter serial=190021
10:04:24 Color wheel filter change from 0 to 0
10:04:24 FLIGetFilterPos err=0  currentPosition=0
10:04:24 FLIGetStepsRemaining err=0  RemainingSteps=0
10:04:24 Filter is already there-color wheel unchanged
10:04:24 Received message from Master: op=Shutter serial=190022
10:04:24 Shutter LASER close
10:04:24 Received message from Camera: op=State serial=190024
10:04:24 GetSingleValue result=40  Value=cccccccc
10:04:24 SkyScan query
10:04:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:04:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:04:25 Parameters OK
10:04:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:04:25 Set A/D data flow result=40
10:04:25 Set A/D channel type result=40
10:04:25 Set A/D encoding result=40
10:04:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:04:25 Set channel filter=0.000000e+000  result=40
10:04:25 Config A/D  Result=40
10:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:04:25 Get A/D filter: -9.255963e+061  result=40
10:04:25 Get A/D value=-858993460  result=40
10:04:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:04:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:04:25 Parameters OK
10:04:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:04:25 Set A/D data flow result=40
10:04:25 Set A/D channel type result=40
10:04:25 Set A/D encoding result=40
10:04:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:04:25 Set channel filter=0.000000e+000  result=40
10:04:25 Config A/D  Result=40
10:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:04:25 Get A/D filter: -9.255963e+061  result=40
10:04:25 Get A/D value=-858993460  result=40
10:04:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:04:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:04:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:04:25 Aux=
10:04:25 Message to Camera, serial 190024 queued
10:05:02 Received message from Master: op=PointingHead serial=190037
10:05:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:05:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:05:02 Point started: ret=0
10:05:02 point_skyscan result=0
10:05:03 Check angles
10:05:03 SkyScan query
10:05:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:05:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:05:03 Message to Master queued w/err=0: serial=190037 error=0
10:05:08 Received message from Master: op=Filter serial=190038
10:05:08 Color wheel filter change from 0 to 0
10:05:08 FLIGetFilterPos err=0  currentPosition=0
10:05:08 FLIGetStepsRemaining err=0  RemainingSteps=0
10:05:08 Filter is already there-color wheel unchanged
10:05:08 Received message from Master: op=Shutter serial=190039
10:05:08 Shutter LASER close
10:05:08 Received message from Camera: op=State serial=190041
10:05:08 GetSingleValue result=40  Value=cccccccc
10:05:08 SkyScan query
10:05:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:05:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:05:09 Parameters OK
10:05:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:05:09 Set A/D data flow result=40
10:05:09 Set A/D channel type result=40
10:05:09 Set A/D encoding result=40
10:05:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:05:09 Set channel filter=0.000000e+000  result=40
10:05:09 Config A/D  Result=40
10:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:05:09 Get A/D filter: -9.255963e+061  result=40
10:05:09 Get A/D value=-858993460  result=40
10:05:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:05:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:05:09 Parameters OK
10:05:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:05:09 Set A/D data flow result=40
10:05:09 Set A/D channel type result=40
10:05:09 Set A/D encoding result=40
10:05:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:05:09 Set channel filter=0.000000e+000  result=40
10:05:09 Config A/D  Result=40
10:05:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:05:09 Get A/D filter: -9.255963e+061  result=40
10:05:09 Get A/D value=-858993460  result=40
10:05:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:05:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:05:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:05:09 Aux=
10:05:09 Message to Camera, serial 190041 queued
10:05:46 Received message from Master: op=PointingHead serial=190054
10:05:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:05:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:05:46 Point started: ret=0
10:05:46 point_skyscan result=0
10:05:47 Check angles
10:05:47 SkyScan query
10:05:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:05:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:05:47 Message to Master queued w/err=0: serial=190054 error=0
10:05:52 Received message from Master: op=Filter serial=190055
10:05:52 Color wheel filter change from 0 to 0
10:05:52 FLIGetFilterPos err=0  currentPosition=0
10:05:52 FLIGetStepsRemaining err=0  RemainingSteps=0
10:05:52 Filter is already there-color wheel unchanged
10:05:53 Received message from Master: op=Shutter serial=190056
10:05:53 Shutter LASER close
10:05:53 Received message from Camera: op=State serial=190058
10:05:53 GetSingleValue result=40  Value=cccccccc
10:05:53 SkyScan query
10:05:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:05:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:05:53 Parameters OK
10:05:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:05:53 Set A/D data flow result=40
10:05:53 Set A/D channel type result=40
10:05:53 Set A/D encoding result=40
10:05:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:05:53 Set channel filter=0.000000e+000  result=40
10:05:53 Config A/D  Result=40
10:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:05:53 Get A/D filter: -9.255963e+061  result=40
10:05:53 Get A/D value=-858993460  result=40
10:05:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:05:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:05:53 Parameters OK
10:05:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:05:53 Set A/D data flow result=40
10:05:53 Set A/D channel type result=40
10:05:53 Set A/D encoding result=40
10:05:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:05:53 Set channel filter=0.000000e+000  result=40
10:05:53 Config A/D  Result=40
10:05:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:05:53 Get A/D filter: -9.255963e+061  result=40
10:05:53 Get A/D value=-858993460  result=40
10:05:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:05:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:05:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:05:53 Aux=
10:05:53 Message to Camera, serial 190058 queued
10:06:30 Received message from Master: op=PointingHead serial=190071
10:06:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:06:30 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:06:30 Point started: ret=0
10:06:30 point_skyscan result=0
10:06:31 Check angles
10:06:31 SkyScan query
10:06:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.205<-13547  Statuses=0008 0009
10:06:32 Msec=0  True Az=112.995  Ze=-23.205  Az status=0008  Ze status=0009
10:06:32 Check angles
10:06:32 SkyScan query
10:06:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.175<-14945  Statuses=0008 0009
10:06:33 Msec=750  True Az=112.995  Ze=-44.175  Az status=0008  Ze status=0009
10:06:33 Check angles
10:06:33 SkyScan query
10:06:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.235<-16349  Statuses=0008 0009
10:06:33 Msec=1500  True Az=112.995  Ze=-65.235  Az status=0008  Ze status=0009
10:06:33 Check angles
10:06:33 SkyScan query
10:06:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.085<-17739  Statuses=0008 0009
10:06:34 Msec=2250  True Az=112.995  Ze=-86.085  Az status=0008  Ze status=0009
10:06:34 Check angles
10:06:34 SkyScan query
10:06:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.04<-19136  Statuses=0008 0009
10:06:35 Msec=3000  True Az=112.995  Ze=-107.04  Az status=0008  Ze status=0009
10:06:35 Check angles
10:06:35 SkyScan query
10:06:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.995<-20533  Statuses=0008 0009
10:06:36 Msec=3750  True Az=112.995  Ze=-127.995  Az status=0008  Ze status=0009
10:06:36 Check angles
10:06:36 SkyScan query
10:06:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.95<-21930  Statuses=0008 0009
10:06:36 Msec=4500  True Az=112.995  Ze=-148.95  Az status=0008  Ze status=0009
10:06:36 Check angles
10:06:36 SkyScan query
10:06:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.89<-23326  Statuses=0008 0009
10:06:37 Msec=5250  True Az=112.995  Ze=-169.89  Az status=0008  Ze status=0009
10:06:37 Check angles
10:06:37 SkyScan query
10:06:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:06:38 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:06:38 Message to Master queued w/err=0: serial=190071 error=0
10:06:43 Received message from Master: op=Filter serial=190072
10:06:43 Color wheel filter change from 0 to 0
10:06:43 FLIGetFilterPos err=0  currentPosition=0
10:06:43 FLIGetStepsRemaining err=0  RemainingSteps=0
10:06:43 Filter is already there-color wheel unchanged
10:06:43 Received message from Master: op=Shutter serial=190073
10:06:43 Shutter LASER open
10:06:43 Received message from Camera: op=State serial=190075
10:06:43 GetSingleValue result=40  Value=cccccccc
10:06:43 SkyScan query
10:06:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:06:44 Parameters OK
10:06:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:06:44 Set A/D data flow result=40
10:06:44 Set A/D channel type result=40
10:06:44 Set A/D encoding result=40
10:06:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:06:44 Set channel filter=0.000000e+000  result=40
10:06:44 Config A/D  Result=40
10:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:06:44 Get A/D filter: -9.255963e+061  result=40
10:06:44 Get A/D value=-858993460  result=40
10:06:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:06:44 Parameters OK
10:06:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:06:44 Set A/D data flow result=40
10:06:44 Set A/D channel type result=40
10:06:44 Set A/D encoding result=40
10:06:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:06:44 Set channel filter=0.000000e+000  result=40
10:06:44 Config A/D  Result=40
10:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:06:44 Get A/D filter: -9.255963e+061  result=40
10:06:44 Get A/D value=-858993460  result=40
10:06:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:06:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:06:44 Aux=
10:06:44 Message to Camera, serial 190075 queued
10:06:52 Received message from Master: op=Shutter serial=190085
10:06:52 Shutter LASER close
10:06:53 Received message from Master: op=PointingHead serial=190089
10:06:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:06:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:06:53 Point started: ret=0
10:06:53 point_skyscan result=0
10:06:54 Check angles
10:06:54 SkyScan query
10:06:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.965<-21531  Statuses=0008 0009
10:06:54 Msec=0  True Az=112.995  Ze=-142.965  Az status=0008  Ze status=0009
10:06:55 Check angles
10:06:55 SkyScan query
10:06:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.98<-20132  Statuses=0008 0009
10:06:55 Msec=750  True Az=112.995  Ze=-121.98  Az status=0008  Ze status=0009
10:06:55 Check angles
10:06:55 SkyScan query
10:06:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.055<-18737  Statuses=0008 0009
10:06:56 Msec=1500  True Az=112.995  Ze=-101.055  Az status=0008  Ze status=0009
10:06:56 Check angles
10:06:56 SkyScan query
10:06:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.1<-17340  Statuses=0008 0009
10:06:57 Msec=2250  True Az=112.995  Ze=-80.1  Az status=0008  Ze status=0009
10:06:57 Check angles
10:06:57 SkyScan query
10:06:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.145<-15943  Statuses=0008 0009
10:06:57 Msec=3000  True Az=112.995  Ze=-59.145  Az status=0008  Ze status=0009
10:06:58 Check angles
10:06:58 SkyScan query
10:06:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.16<-14544  Statuses=0008 0009
10:06:58 Msec=3750  True Az=112.995  Ze=-38.16  Az status=0008  Ze status=0009
10:06:58 Check angles
10:06:58 SkyScan query
10:06:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.235<-13149  Statuses=0008 0009
10:06:59 Msec=4500  True Az=112.995  Ze=-17.235  Az status=0008  Ze status=0009
10:06:59 Check angles
10:06:59 SkyScan query
10:07:00 SkyScan query done: ret=0  az=112.995<-7533  ze=4.14<-11724  Statuses=0008 0009
10:07:00 Msec=5250  True Az=112.995  Ze=4.14  Az status=0008  Ze status=0009
10:07:00 Check angles
10:07:00 SkyScan query
10:07:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:07:00 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:07:00 Message to Master queued w/err=0: serial=190089 error=0
10:07:05 Received message from Master: op=Filter serial=190090
10:07:05 Color wheel filter change from 0 to 0
10:07:05 FLIGetFilterPos err=0  currentPosition=0
10:07:05 FLIGetStepsRemaining err=0  RemainingSteps=0
10:07:05 Filter is already there-color wheel unchanged
10:07:06 Received message from Master: op=Shutter serial=190091
10:07:06 Shutter LASER close
10:07:06 Received message from Camera: op=State serial=190093
10:07:06 GetSingleValue result=40  Value=cccccccc
10:07:06 SkyScan query
10:07:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:07:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:07:06 Parameters OK
10:07:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:07:06 Set A/D data flow result=40
10:07:06 Set A/D channel type result=40
10:07:06 Set A/D encoding result=40
10:07:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:07:06 Set channel filter=0.000000e+000  result=40
10:07:06 Config A/D  Result=40
10:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:07:06 Get A/D filter: -9.255963e+061  result=40
10:07:06 Get A/D value=-858993460  result=40
10:07:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:07:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:07:06 Parameters OK
10:07:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:07:06 Set A/D data flow result=40
10:07:06 Set A/D channel type result=40
10:07:06 Set A/D encoding result=40
10:07:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:07:06 Set channel filter=0.000000e+000  result=40
10:07:06 Config A/D  Result=40
10:07:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:07:06 Get A/D filter: -9.255963e+061  result=40
10:07:06 Get A/D value=-858993460  result=40
10:07:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:07:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:07:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:07:06 Aux=
10:07:06 Message to Camera, serial 190093 queued
10:07:43 Received message from Master: op=PointingHead serial=190106
10:07:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:07:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:07:43 Point started: ret=0
10:07:43 point_skyscan result=0
10:07:44 Check angles
10:07:44 SkyScan query
10:07:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:07:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:07:45 Message to Master queued w/err=0: serial=190106 error=0
10:07:50 Received message from Master: op=Filter serial=190107
10:07:50 Color wheel filter change from 0 to 0
10:07:50 FLIGetFilterPos err=0  currentPosition=0
10:07:50 FLIGetStepsRemaining err=0  RemainingSteps=0
10:07:50 Filter is already there-color wheel unchanged
10:07:50 Received message from Master: op=Shutter serial=190108
10:07:50 Shutter LASER close
10:07:50 Received message from Camera: op=State serial=190110
10:07:50 GetSingleValue result=40  Value=cccccccc
10:07:50 SkyScan query
10:07:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:07:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:07:51 Parameters OK
10:07:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:07:51 Set A/D data flow result=40
10:07:51 Set A/D channel type result=40
10:07:51 Set A/D encoding result=40
10:07:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:07:51 Set channel filter=0.000000e+000  result=40
10:07:51 Config A/D  Result=40
10:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:07:51 Get A/D filter: -9.255963e+061  result=40
10:07:51 Get A/D value=-858993460  result=40
10:07:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:07:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:07:51 Parameters OK
10:07:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:07:51 Set A/D data flow result=40
10:07:51 Set A/D channel type result=40
10:07:51 Set A/D encoding result=40
10:07:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:07:51 Set channel filter=0.000000e+000  result=40
10:07:51 Config A/D  Result=40
10:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:07:51 Get A/D filter: -9.255963e+061  result=40
10:07:51 Get A/D value=-858993460  result=40
10:07:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:07:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:07:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:07:51 Aux=
10:07:51 Message to Camera, serial 190110 queued
10:08:27 Received message from Master: op=PointingHead serial=190123
10:08:27 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:08:27 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:08:28 Point started: ret=0
10:08:28 point_skyscan result=0
10:08:29 Check angles
10:08:29 SkyScan query
10:08:29 SkyScan query done: ret=0  az=135.975<-9065  ze=-6.51<-12434  Statuses=0009 0008
10:08:29 Msec=0  True Az=135.975  Ze=-6.51  Az status=0009  Ze status=0008
10:08:29 Check angles
10:08:29 SkyScan query
10:08:30 SkyScan query done: ret=0  az=153.765<-10251  ze=-6.495<-12433  Statuses=0009 0008
10:08:30 Msec=750  True Az=153.765  Ze=-6.495  Az status=0009  Ze status=0008
10:08:30 Check angles
10:08:30 SkyScan query
10:08:31 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.495<-12433  Statuses=0009 0008
10:08:31 Msec=1500  True Az=171.33  Ze=-6.495  Az status=0009  Ze status=0008
10:08:31 Check angles
10:08:31 SkyScan query
10:08:31 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:08:31 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:08:31 Message to Master queued w/err=0: serial=190123 error=0
10:08:36 Received message from Master: op=Filter serial=190124
10:08:36 Color wheel filter change from 0 to 0
10:08:36 FLIGetFilterPos err=0  currentPosition=0
10:08:36 FLIGetStepsRemaining err=0  RemainingSteps=0
10:08:36 Filter is already there-color wheel unchanged
10:08:37 Received message from Master: op=Shutter serial=190125
10:08:37 Shutter LASER close
10:08:37 Received message from Camera: op=State serial=190127
10:08:37 GetSingleValue result=40  Value=cccccccc
10:08:37 SkyScan query
10:08:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:08:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:08:37 Parameters OK
10:08:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:08:37 Set A/D data flow result=40
10:08:37 Set A/D channel type result=40
10:08:37 Set A/D encoding result=40
10:08:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:08:37 Set channel filter=0.000000e+000  result=40
10:08:37 Config A/D  Result=40
10:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:08:37 Get A/D filter: -9.255963e+061  result=40
10:08:37 Get A/D value=-858993460  result=40
10:08:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:08:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:08:37 Parameters OK
10:08:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:08:37 Set A/D data flow result=40
10:08:37 Set A/D channel type result=40
10:08:37 Set A/D encoding result=40
10:08:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:08:37 Set channel filter=0.000000e+000  result=40
10:08:37 Config A/D  Result=40
10:08:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:08:37 Get A/D filter: -9.255963e+061  result=40
10:08:37 Get A/D value=-858993460  result=40
10:08:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:08:37 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:08:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:08:37 Aux=
10:08:37 Message to Camera, serial 190127 queued
10:09:14 Received message from Master: op=PointingHead serial=190140
10:09:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:09:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:09:14 Point started: ret=0
10:09:14 point_skyscan result=0
10:09:15 Check angles
10:09:15 SkyScan query
10:09:16 SkyScan query done: ret=0  az=153.075<-10205  ze=6.51<-11566  Statuses=0009 0008
10:09:16 Msec=0  True Az=153.075  Ze=6.51  Az status=0009  Ze status=0008
10:09:16 Check angles
10:09:16 SkyScan query
10:09:17 SkyScan query done: ret=0  az=135.075<-9005  ze=6.495<-11567  Statuses=0009 0008
10:09:17 Msec=750  True Az=135.075  Ze=6.495  Az status=0009  Ze status=0008
10:09:17 Check angles
10:09:17 SkyScan query
10:09:17 SkyScan query done: ret=0  az=117.675<-7845  ze=6.495<-11567  Statuses=0009 0008
10:09:17 Msec=1500  True Az=117.675  Ze=6.495  Az status=0009  Ze status=0008
10:09:17 Check angles
10:09:17 SkyScan query
10:09:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:09:18 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:09:18 Message to Master queued w/err=0: serial=190140 error=0
10:09:23 Received message from Master: op=Filter serial=190141
10:09:23 Color wheel filter change from 0 to 0
10:09:23 FLIGetFilterPos err=0  currentPosition=0
10:09:23 FLIGetStepsRemaining err=0  RemainingSteps=0
10:09:23 Filter is already there-color wheel unchanged
10:09:23 Received message from Master: op=Shutter serial=190142
10:09:23 Shutter LASER close
10:09:23 Received message from Camera: op=State serial=190144
10:09:23 GetSingleValue result=40  Value=cccccccc
10:09:23 SkyScan query
10:09:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:09:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:09:24 Parameters OK
10:09:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:09:24 Set A/D data flow result=40
10:09:24 Set A/D channel type result=40
10:09:24 Set A/D encoding result=40
10:09:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:09:24 Set channel filter=0.000000e+000  result=40
10:09:24 Config A/D  Result=40
10:09:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:09:24 Get A/D filter: -9.255963e+061  result=40
10:09:24 Get A/D value=-858993460  result=40
10:09:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:09:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:09:24 Parameters OK
10:09:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:09:24 Set A/D data flow result=40
10:09:24 Set A/D channel type result=40
10:09:24 Set A/D encoding result=40
10:09:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:09:24 Set channel filter=0.000000e+000  result=40
10:09:24 Config A/D  Result=40
10:09:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:09:24 Get A/D filter: -9.255963e+061  result=40
10:09:24 Get A/D value=-858993460  result=40
10:09:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:09:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:09:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:09:24 Aux=
10:09:24 Message to Camera, serial 190144 queued
10:10:01 Received message from Master: op=PointingHead serial=190157
10:10:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:10:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:10:01 Point started: ret=0
10:10:01 point_skyscan result=0
10:10:02 Check angles
10:10:02 SkyScan query
10:10:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.355<-13557  Statuses=0008 0009
10:10:02 Msec=0  True Az=112.995  Ze=-23.355  Az status=0008  Ze status=0009
10:10:02 Check angles
10:10:02 SkyScan query
10:10:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.325<-14955  Statuses=0008 0009
10:10:03 Msec=750  True Az=112.995  Ze=-44.325  Az status=0008  Ze status=0009
10:10:03 Check angles
10:10:03 SkyScan query
10:10:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.28<-16352  Statuses=0008 0009
10:10:04 Msec=1500  True Az=112.995  Ze=-65.28  Az status=0008  Ze status=0009
10:10:04 Check angles
10:10:04 SkyScan query
10:10:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.67<-17778  Statuses=0008 0009
10:10:05 Msec=2250  True Az=112.995  Ze=-86.67  Az status=0008  Ze status=0009
10:10:05 Check angles
10:10:05 SkyScan query
10:10:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.06<-19204  Statuses=0008 0009
10:10:05 Msec=3000  True Az=112.995  Ze=-108.06  Az status=0008  Ze status=0009
10:10:06 Check angles
10:10:06 SkyScan query
10:10:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-129<-20600  Statuses=0008 0009
10:10:06 Msec=3750  True Az=112.995  Ze=-129  Az status=0008  Ze status=0009
10:10:06 Check angles
10:10:06 SkyScan query
10:10:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.955<-21997  Statuses=0008 0009
10:10:07 Msec=4500  True Az=112.995  Ze=-149.955  Az status=0008  Ze status=0009
10:10:07 Check angles
10:10:07 SkyScan query
10:10:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
10:10:08 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
10:10:08 Check angles
10:10:08 SkyScan query
10:10:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:10:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:10:08 Message to Master queued w/err=0: serial=190157 error=0
10:10:13 Received message from Master: op=Filter serial=190158
10:10:13 Color wheel filter change from 0 to 0
10:10:13 FLIGetFilterPos err=0  currentPosition=0
10:10:13 FLIGetStepsRemaining err=0  RemainingSteps=0
10:10:13 Filter is already there-color wheel unchanged
10:10:14 Received message from Master: op=Shutter serial=190159
10:10:14 Shutter LASER open
10:10:14 Received message from Camera: op=State serial=190161
10:10:14 GetSingleValue result=40  Value=cccccccc
10:10:14 SkyScan query
10:10:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:10:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:10:14 Parameters OK
10:10:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:10:14 Set A/D data flow result=40
10:10:14 Set A/D channel type result=40
10:10:14 Set A/D encoding result=40
10:10:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:10:14 Set channel filter=0.000000e+000  result=40
10:10:14 Config A/D  Result=40
10:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:10:14 Get A/D filter: -9.255963e+061  result=40
10:10:14 Get A/D value=-858993460  result=40
10:10:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:10:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:10:14 Parameters OK
10:10:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:10:14 Set A/D data flow result=40
10:10:14 Set A/D channel type result=40
10:10:14 Set A/D encoding result=40
10:10:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:10:14 Set channel filter=0.000000e+000  result=40
10:10:14 Config A/D  Result=40
10:10:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:10:14 Get A/D filter: -9.255963e+061  result=40
10:10:14 Get A/D value=-858993460  result=40
10:10:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:10:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:10:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:10:14 Aux=
10:10:14 Message to Camera, serial 190161 queued
10:10:22 Received message from Master: op=Shutter serial=190170
10:10:22 Shutter LASER close
10:10:22 Received message from Master: op=PointingHead serial=190174
10:10:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:10:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:10:23 Point started: ret=0
10:10:23 point_skyscan result=0
10:10:23 Check angles
10:10:23 SkyScan query
10:10:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.085<-21539  Statuses=0008 0009
10:10:24 Msec=0  True Az=112.995  Ze=-143.085  Az status=0008  Ze status=0009
10:10:24 Check angles
10:10:24 SkyScan query
10:10:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.68<-20112  Statuses=0008 0009
10:10:25 Msec=750  True Az=112.995  Ze=-121.68  Az status=0008  Ze status=0009
10:10:25 Check angles
10:10:25 SkyScan query
10:10:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.74<-18716  Statuses=0008 0009
10:10:25 Msec=1500  True Az=112.995  Ze=-100.74  Az status=0008  Ze status=0009
10:10:26 Check angles
10:10:26 SkyScan query
10:10:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.8<-17320  Statuses=0008 0009
10:10:26 Msec=2250  True Az=112.995  Ze=-79.8  Az status=0008  Ze status=0009
10:10:26 Check angles
10:10:26 SkyScan query
10:10:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.38<-15892  Statuses=0008 0009
10:10:27 Msec=3000  True Az=112.995  Ze=-58.38  Az status=0008  Ze status=0009
10:10:27 Check angles
10:10:27 SkyScan query
10:10:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.455<-14497  Statuses=0008 0009
10:10:28 Msec=3750  True Az=112.995  Ze=-37.455  Az status=0008  Ze status=0009
10:10:28 Check angles
10:10:28 SkyScan query
10:10:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.47<-13098  Statuses=0008 0009
10:10:28 Msec=4500  True Az=112.995  Ze=-16.47  Az status=0008  Ze status=0009
10:10:29 Check angles
10:10:29 SkyScan query
10:10:29 SkyScan query done: ret=0  az=112.995<-7533  ze=4.395<-11707  Statuses=0008 0009
10:10:29 Msec=5250  True Az=112.995  Ze=4.395  Az status=0008  Ze status=0009
10:10:29 Check angles
10:10:29 SkyScan query
10:10:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:10:30 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:10:30 Message to Master queued w/err=0: serial=190174 error=0
10:10:35 Received message from Master: op=Filter serial=190175
10:10:35 Color wheel filter change from 0 to 0
10:10:35 FLIGetFilterPos err=0  currentPosition=0
10:10:35 FLIGetStepsRemaining err=0  RemainingSteps=0
10:10:35 Filter is already there-color wheel unchanged
10:10:35 Received message from Master: op=Shutter serial=190176
10:10:35 Shutter LASER close
10:10:35 Received message from Camera: op=State serial=190178
10:10:35 GetSingleValue result=40  Value=cccccccc
10:10:35 SkyScan query
10:10:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:10:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:10:36 Parameters OK
10:10:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:10:36 Set A/D data flow result=40
10:10:36 Set A/D channel type result=40
10:10:36 Set A/D encoding result=40
10:10:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:10:36 Set channel filter=0.000000e+000  result=40
10:10:36 Config A/D  Result=40
10:10:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:10:36 Get A/D filter: -9.255963e+061  result=40
10:10:36 Get A/D value=-858993460  result=40
10:10:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:10:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:10:36 Parameters OK
10:10:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:10:36 Set A/D data flow result=40
10:10:36 Set A/D channel type result=40
10:10:36 Set A/D encoding result=40
10:10:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:10:36 Set channel filter=0.000000e+000  result=40
10:10:36 Config A/D  Result=40
10:10:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:10:36 Get A/D filter: -9.255963e+061  result=40
10:10:36 Get A/D value=-858993460  result=40
10:10:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:10:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:10:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:10:36 Aux=
10:10:36 Message to Camera, serial 190178 queued
10:11:13 Received message from Master: op=PointingHead serial=190191
10:11:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:11:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:11:13 Point started: ret=0
10:11:13 point_skyscan result=0
10:11:14 Check angles
10:11:14 SkyScan query
10:11:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:11:14 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:11:14 Message to Master queued w/err=0: serial=190191 error=0
10:11:19 Received message from Master: op=Filter serial=190192
10:11:19 Color wheel filter change from 0 to 0
10:11:19 FLIGetFilterPos err=0  currentPosition=0
10:11:19 FLIGetStepsRemaining err=0  RemainingSteps=0
10:11:19 Filter is already there-color wheel unchanged
10:11:19 Received message from Master: op=Shutter serial=190193
10:11:19 Shutter LASER close
10:11:20 Received message from Camera: op=State serial=190195
10:11:20 GetSingleValue result=40  Value=cccccccc
10:11:20 SkyScan query
10:11:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:11:20 Parameters OK
10:11:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:11:20 Set A/D data flow result=40
10:11:20 Set A/D channel type result=40
10:11:20 Set A/D encoding result=40
10:11:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:11:20 Set channel filter=0.000000e+000  result=40
10:11:20 Config A/D  Result=40
10:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:11:20 Get A/D filter: -9.255963e+061  result=40
10:11:20 Get A/D value=-858993460  result=40
10:11:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:11:20 Parameters OK
10:11:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:11:20 Set A/D data flow result=40
10:11:20 Set A/D channel type result=40
10:11:20 Set A/D encoding result=40
10:11:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:11:20 Set channel filter=0.000000e+000  result=40
10:11:20 Config A/D  Result=40
10:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:11:20 Get A/D filter: -9.255963e+061  result=40
10:11:20 Get A/D value=-858993460  result=40
10:11:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:11:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:11:20 Aux=
10:11:20 Message to Camera, serial 190195 queued
10:11:57 Received message from Master: op=PointingHead serial=190208
10:11:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:11:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:11:57 Point started: ret=0
10:11:57 point_skyscan result=0
10:11:58 Check angles
10:11:58 SkyScan query
10:11:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:11:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:11:59 Message to Master queued w/err=0: serial=190208 error=0
10:12:04 Received message from Master: op=Filter serial=190209
10:12:04 Color wheel filter change from 0 to 0
10:12:04 FLIGetFilterPos err=0  currentPosition=0
10:12:04 FLIGetStepsRemaining err=0  RemainingSteps=0
10:12:04 Filter is already there-color wheel unchanged
10:12:04 Received message from Master: op=Shutter serial=190210
10:12:04 Shutter LASER close
10:12:04 Received message from Camera: op=State serial=190212
10:12:04 GetSingleValue result=40  Value=cccccccc
10:12:04 SkyScan query
10:12:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:12:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:12:04 Parameters OK
10:12:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:12:04 Set A/D data flow result=40
10:12:04 Set A/D channel type result=40
10:12:04 Set A/D encoding result=40
10:12:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:12:04 Set channel filter=0.000000e+000  result=40
10:12:04 Config A/D  Result=40
10:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:12:04 Get A/D filter: -9.255963e+061  result=40
10:12:04 Get A/D value=-858993460  result=40
10:12:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:12:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:12:04 Parameters OK
10:12:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:12:04 Set A/D data flow result=40
10:12:04 Set A/D channel type result=40
10:12:04 Set A/D encoding result=40
10:12:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:12:04 Set channel filter=0.000000e+000  result=40
10:12:04 Config A/D  Result=40
10:12:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:12:04 Get A/D filter: -9.255963e+061  result=40
10:12:04 Get A/D value=-858993460  result=40
10:12:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:12:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:12:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:12:04 Aux=
10:12:04 Message to Camera, serial 190212 queued
10:12:41 Received message from Master: op=PointingHead serial=190225
10:12:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:12:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:12:42 Point started: ret=0
10:12:42 point_skyscan result=0
10:12:42 Check angles
10:12:42 SkyScan query
10:12:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:12:43 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:12:43 Message to Master queued w/err=0: serial=190225 error=0
10:12:48 Received message from Master: op=Filter serial=190226
10:12:48 Color wheel filter change from 0 to 0
10:12:48 FLIGetFilterPos err=0  currentPosition=0
10:12:48 FLIGetStepsRemaining err=0  RemainingSteps=0
10:12:48 Filter is already there-color wheel unchanged
10:12:48 Received message from Master: op=Shutter serial=190227
10:12:48 Shutter LASER close
10:12:48 Received message from Camera: op=State serial=190229
10:12:48 GetSingleValue result=40  Value=cccccccc
10:12:48 SkyScan query
10:12:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:12:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:12:49 Parameters OK
10:12:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:12:49 Set A/D data flow result=40
10:12:49 Set A/D channel type result=40
10:12:49 Set A/D encoding result=40
10:12:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:12:49 Set channel filter=0.000000e+000  result=40
10:12:49 Config A/D  Result=40
10:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:12:49 Get A/D filter: -9.255963e+061  result=40
10:12:49 Get A/D value=-858993460  result=40
10:12:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:12:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:12:49 Parameters OK
10:12:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:12:49 Set A/D data flow result=40
10:12:49 Set A/D channel type result=40
10:12:49 Set A/D encoding result=40
10:12:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:12:49 Set channel filter=0.000000e+000  result=40
10:12:49 Config A/D  Result=40
10:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:12:49 Get A/D filter: -9.255963e+061  result=40
10:12:49 Get A/D value=-858993460  result=40
10:12:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:12:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:12:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:12:49 Aux=
10:12:49 Message to Camera, serial 190229 queued
10:13:26 Received message from Master: op=PointingHead serial=190242
10:13:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:13:26 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:13:26 Point started: ret=0
10:13:26 point_skyscan result=0
10:13:27 Check angles
10:13:27 SkyScan query
10:13:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.505<-13567  Statuses=0008 0009
10:13:27 Msec=0  True Az=112.995  Ze=-23.505  Az status=0008  Ze status=0009
10:13:27 Check angles
10:13:27 SkyScan query
10:13:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
10:13:28 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
10:13:28 Check angles
10:13:28 SkyScan query
10:13:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.865<-16391  Statuses=0008 0009
10:13:29 Msec=1500  True Az=112.995  Ze=-65.865  Az status=0008  Ze status=0009
10:13:29 Check angles
10:13:29 SkyScan query
10:13:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.255<-17817  Statuses=0008 0009
10:13:29 Msec=2250  True Az=112.995  Ze=-87.255  Az status=0008  Ze status=0009
10:13:30 Check angles
10:13:30 SkyScan query
10:13:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.615<-19241  Statuses=0008 0009
10:13:30 Msec=3000  True Az=112.995  Ze=-108.615  Az status=0008  Ze status=0009
10:13:30 Check angles
10:13:30 SkyScan query
10:13:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.6<-20640  Statuses=0008 0009
10:13:31 Msec=3750  True Az=112.995  Ze=-129.6  Az status=0008  Ze status=0009
10:13:31 Check angles
10:13:31 SkyScan query
10:13:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.525<-22035  Statuses=0008 0009
10:13:32 Msec=4500  True Az=112.995  Ze=-150.525  Az status=0008  Ze status=0009
10:13:32 Check angles
10:13:32 SkyScan query
10:13:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.285<-23419  Statuses=0008 0009
10:13:33 Msec=5250  True Az=112.995  Ze=-171.285  Az status=0008  Ze status=0009
10:13:33 Check angles
10:13:33 SkyScan query
10:13:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:13:33 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:13:33 Message to Master queued w/err=0: serial=190242 error=0
10:13:38 Received message from Master: op=Filter serial=190243
10:13:38 Color wheel filter change from 0 to 0
10:13:38 FLIGetFilterPos err=0  currentPosition=0
10:13:38 FLIGetStepsRemaining err=0  RemainingSteps=0
10:13:38 Filter is already there-color wheel unchanged
10:13:38 Received message from Master: op=Shutter serial=190244
10:13:38 Shutter LASER open
10:13:39 Received message from Camera: op=State serial=190246
10:13:39 GetSingleValue result=40  Value=cccccccc
10:13:39 SkyScan query
10:13:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:13:39 Parameters OK
10:13:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:13:39 Set A/D data flow result=40
10:13:39 Set A/D channel type result=40
10:13:39 Set A/D encoding result=40
10:13:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:13:39 Set channel filter=0.000000e+000  result=40
10:13:39 Config A/D  Result=40
10:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:13:39 Get A/D filter: -9.255963e+061  result=40
10:13:39 Get A/D value=-858993460  result=40
10:13:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:13:39 Parameters OK
10:13:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:13:39 Set A/D data flow result=40
10:13:39 Set A/D channel type result=40
10:13:39 Set A/D encoding result=40
10:13:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:13:39 Set channel filter=0.000000e+000  result=40
10:13:39 Config A/D  Result=40
10:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:13:39 Get A/D filter: -9.255963e+061  result=40
10:13:39 Get A/D value=-858993460  result=40
10:13:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:13:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:13:39 Aux=
10:13:39 Message to Camera, serial 190246 queued
10:13:48 Received message from Master: op=Shutter serial=190256
10:13:48 Shutter LASER close
10:13:48 Received message from Master: op=PointingHead serial=190260
10:13:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:13:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:13:49 Point started: ret=0
10:13:49 point_skyscan result=0
10:13:49 Check angles
10:13:49 SkyScan query
10:13:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
10:13:50 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
10:13:50 Check angles
10:13:50 SkyScan query
10:13:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
10:13:51 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
10:13:51 Check angles
10:13:51 SkyScan query
10:13:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.565<-18771  Statuses=0008 0009
10:13:51 Msec=1500  True Az=112.995  Ze=-101.565  Az status=0008  Ze status=0009
10:13:52 Check angles
10:13:52 SkyScan query
10:13:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.19<-17346  Statuses=0008 0009
10:13:52 Msec=2250  True Az=112.995  Ze=-80.19  Az status=0008  Ze status=0009
10:13:52 Check angles
10:13:52 SkyScan query
10:13:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.235<-15949  Statuses=0008 0009
10:13:53 Msec=3000  True Az=112.995  Ze=-59.235  Az status=0008  Ze status=0009
10:13:53 Check angles
10:13:53 SkyScan query
10:13:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.25<-14550  Statuses=0008 0009
10:13:54 Msec=3750  True Az=112.995  Ze=-38.25  Az status=0008  Ze status=0009
10:13:54 Check angles
10:13:54 SkyScan query
10:13:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.31<-13154  Statuses=0008 0009
10:13:54 Msec=4500  True Az=112.995  Ze=-17.31  Az status=0008  Ze status=0009
10:13:55 Check angles
10:13:55 SkyScan query
10:13:55 SkyScan query done: ret=0  az=112.995<-7533  ze=4.08<-11728  Statuses=0008 0009
10:13:55 Msec=5250  True Az=112.995  Ze=4.08  Az status=0008  Ze status=0009
10:13:55 Check angles
10:13:55 SkyScan query
10:13:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:13:56 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:13:56 Message to Master queued w/err=0: serial=190260 error=0
10:14:01 Received message from Master: op=Filter serial=190261
10:14:01 Color wheel filter change from 0 to 0
10:14:01 FLIGetFilterPos err=0  currentPosition=0
10:14:01 FLIGetStepsRemaining err=0  RemainingSteps=0
10:14:01 Filter is already there-color wheel unchanged
10:14:01 Received message from Master: op=Shutter serial=190262
10:14:01 Shutter LASER close
10:14:01 Received message from Camera: op=State serial=190264
10:14:01 GetSingleValue result=40  Value=cccccccc
10:14:01 SkyScan query
10:14:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:14:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:14:02 Parameters OK
10:14:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:14:02 Set A/D data flow result=40
10:14:02 Set A/D channel type result=40
10:14:02 Set A/D encoding result=40
10:14:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:14:02 Set channel filter=0.000000e+000  result=40
10:14:02 Config A/D  Result=40
10:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:14:02 Get A/D filter: -9.255963e+061  result=40
10:14:02 Get A/D value=-858993460  result=40
10:14:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:14:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:14:02 Parameters OK
10:14:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:14:02 Set A/D data flow result=40
10:14:02 Set A/D channel type result=40
10:14:02 Set A/D encoding result=40
10:14:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:14:02 Set channel filter=0.000000e+000  result=40
10:14:02 Config A/D  Result=40
10:14:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:14:02 Get A/D filter: -9.255963e+061  result=40
10:14:02 Get A/D value=-858993460  result=40
10:14:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:14:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:14:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:14:02 Aux=
10:14:02 Message to Camera, serial 190264 queued
10:14:39 Received message from Master: op=PointingHead serial=190277
10:14:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:14:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:14:39 Point started: ret=0
10:14:39 point_skyscan result=0
10:14:40 Check angles
10:14:40 SkyScan query
10:14:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:14:40 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:14:40 Message to Master queued w/err=0: serial=190277 error=0
10:14:45 Received message from Master: op=Filter serial=190278
10:14:45 Color wheel filter change from 0 to 0
[UTC 2019-3-9  10:14:45]
10:14:45 FLIGetFilterPos err=0  currentPosition=0
10:14:45 FLIGetStepsRemaining err=0  RemainingSteps=0
10:14:45 Filter is already there-color wheel unchanged
10:14:46 Received message from Master: op=Shutter serial=190279
10:14:46 Shutter LASER close
10:14:46 Received message from Camera: op=State serial=190281
10:14:46 GetSingleValue result=40  Value=cccccccc
10:14:46 SkyScan query
10:14:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:14:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:14:46 Parameters OK
10:14:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:14:46 Set A/D data flow result=40
10:14:46 Set A/D channel type result=40
10:14:46 Set A/D encoding result=40
10:14:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:14:46 Set channel filter=0.000000e+000  result=40
10:14:46 Config A/D  Result=40
10:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:14:46 Get A/D filter: -9.255963e+061  result=40
10:14:46 Get A/D value=-858993460  result=40
10:14:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:14:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:14:46 Parameters OK
10:14:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:14:46 Set A/D data flow result=40
10:14:46 Set A/D channel type result=40
10:14:46 Set A/D encoding result=40
10:14:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:14:46 Set channel filter=0.000000e+000  result=40
10:14:46 Config A/D  Result=40
10:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:14:46 Get A/D filter: -9.255963e+061  result=40
10:14:46 Get A/D value=-858993460  result=40
10:14:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:14:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:14:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:14:46 Aux=
10:14:46 Message to Camera, serial 190281 queued
10:15:23 Received message from Master: op=PointingHead serial=190294
10:15:23 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:15:23 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:15:23 Point started: ret=0
10:15:23 point_skyscan result=0
10:15:24 Check angles
10:15:24 SkyScan query
10:15:25 SkyScan query done: ret=0  az=135.735<-9049  ze=-6.51<-12434  Statuses=0009 0008
10:15:25 Msec=0  True Az=135.735  Ze=-6.51  Az status=0009  Ze status=0008
10:15:25 Check angles
10:15:25 SkyScan query
10:15:26 SkyScan query done: ret=0  az=153.57<-10238  ze=-6.495<-12433  Statuses=0009 0008
10:15:26 Msec=750  True Az=153.57  Ze=-6.495  Az status=0009  Ze status=0008
10:15:26 Check angles
10:15:26 SkyScan query
10:15:26 SkyScan query done: ret=0  az=171<-11400  ze=-6.495<-12433  Statuses=0009 0008
10:15:26 Msec=1500  True Az=171  Ze=-6.495  Az status=0009  Ze status=0008
10:15:26 Check angles
10:15:26 SkyScan query
10:15:27 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:15:27 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:15:27 Message to Master queued w/err=0: serial=190294 error=0
10:15:32 Received message from Master: op=Filter serial=190295
10:15:32 Color wheel filter change from 0 to 0
10:15:32 FLIGetFilterPos err=0  currentPosition=0
10:15:32 FLIGetStepsRemaining err=0  RemainingSteps=0
10:15:32 Filter is already there-color wheel unchanged
10:15:32 Received message from Master: op=Shutter serial=190296
10:15:32 Shutter LASER close
10:15:32 Received message from Camera: op=State serial=190298
10:15:32 GetSingleValue result=40  Value=cccccccc
10:15:32 SkyScan query
10:15:33 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:15:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:15:33 Parameters OK
10:15:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:15:33 Set A/D data flow result=40
10:15:33 Set A/D channel type result=40
10:15:33 Set A/D encoding result=40
10:15:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:15:33 Set channel filter=0.000000e+000  result=40
10:15:33 Config A/D  Result=40
10:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:15:33 Get A/D filter: -9.255963e+061  result=40
10:15:33 Get A/D value=-858993460  result=40
10:15:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:15:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:15:33 Parameters OK
10:15:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:15:33 Set A/D data flow result=40
10:15:33 Set A/D channel type result=40
10:15:33 Set A/D encoding result=40
10:15:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:15:33 Set channel filter=0.000000e+000  result=40
10:15:33 Config A/D  Result=40
10:15:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:15:33 Get A/D filter: -9.255963e+061  result=40
10:15:33 Get A/D value=-858993460  result=40
10:15:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:15:33 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:15:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:15:33 Aux=
10:15:33 Message to Camera, serial 190298 queued
10:16:10 Received message from Master: op=PointingHead serial=190311
10:16:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:16:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:16:10 Point started: ret=0
10:16:10 point_skyscan result=0
10:16:11 Check angles
10:16:11 SkyScan query
10:16:11 SkyScan query done: ret=0  az=152.715<-10181  ze=6.51<-11566  Statuses=0009 0008
10:16:11 Msec=0  True Az=152.715  Ze=6.51  Az status=0009  Ze status=0008
10:16:12 Check angles
10:16:12 SkyScan query
10:16:12 SkyScan query done: ret=0  az=135.135<-9009  ze=6.495<-11567  Statuses=0009 0008
10:16:12 Msec=750  True Az=135.135  Ze=6.495  Az status=0009  Ze status=0008
10:16:12 Check angles
10:16:12 SkyScan query
10:16:13 SkyScan query done: ret=0  az=117.705<-7847  ze=6.495<-11567  Statuses=0009 0008
10:16:13 Msec=1500  True Az=117.705  Ze=6.495  Az status=0009  Ze status=0008
10:16:13 Check angles
10:16:13 SkyScan query
10:16:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:16:14 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:16:14 Message to Master queued w/err=0: serial=190311 error=0
10:16:19 Received message from Master: op=Filter serial=190312
10:16:19 Color wheel filter change from 0 to 0
10:16:19 FLIGetFilterPos err=0  currentPosition=0
10:16:19 FLIGetStepsRemaining err=0  RemainingSteps=0
10:16:19 Filter is already there-color wheel unchanged
10:16:19 Received message from Master: op=Shutter serial=190313
10:16:19 Shutter LASER close
10:16:19 Received message from Camera: op=State serial=190315
10:16:19 GetSingleValue result=40  Value=cccccccc
10:16:19 SkyScan query
10:16:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:16:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:16:19 Parameters OK
10:16:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:16:19 Set A/D data flow result=40
10:16:19 Set A/D channel type result=40
10:16:19 Set A/D encoding result=40
10:16:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:16:19 Set channel filter=0.000000e+000  result=40
10:16:19 Config A/D  Result=40
10:16:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:16:19 Get A/D filter: -9.255963e+061  result=40
10:16:19 Get A/D value=-858993460  result=40
10:16:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:16:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:16:19 Parameters OK
10:16:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:16:19 Set A/D data flow result=40
10:16:19 Set A/D channel type result=40
10:16:19 Set A/D encoding result=40
10:16:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:16:19 Set channel filter=0.000000e+000  result=40
10:16:19 Config A/D  Result=40
10:16:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:16:19 Get A/D filter: -9.255963e+061  result=40
10:16:19 Get A/D value=-858993460  result=40
10:16:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:16:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:16:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:16:19 Aux=
10:16:19 Message to Camera, serial 190315 queued
10:16:56 Received message from Master: op=PointingHead serial=190328
10:16:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:16:56 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:16:57 Point started: ret=0
10:16:57 point_skyscan result=0
10:16:57 Check angles
10:16:57 SkyScan query
10:16:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-22.995<-13533  Statuses=0008 0009
10:16:58 Msec=0  True Az=112.995  Ze=-22.995  Az status=0008  Ze status=0009
10:16:58 Check angles
10:16:58 SkyScan query
10:16:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
10:16:59 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
10:16:59 Check angles
10:16:59 SkyScan query
10:16:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.34<-16356  Statuses=0008 0009
10:16:59 Msec=1500  True Az=112.995  Ze=-65.34  Az status=0008  Ze status=0009
10:17:00 Check angles
10:17:00 SkyScan query
10:17:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.31<-17754  Statuses=0008 0009
10:17:00 Msec=2250  True Az=112.995  Ze=-86.31  Az status=0008  Ze status=0009
10:17:00 Check angles
10:17:00 SkyScan query
10:17:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.685<-19179  Statuses=0008 0009
10:17:01 Msec=3000  True Az=112.995  Ze=-107.685  Az status=0008  Ze status=0009
10:17:01 Check angles
10:17:01 SkyScan query
10:17:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.625<-20575  Statuses=0008 0009
10:17:02 Msec=3750  True Az=112.995  Ze=-128.625  Az status=0008  Ze status=0009
10:17:02 Check angles
10:17:02 SkyScan query
10:17:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.595<-21973  Statuses=0008 0009
10:17:02 Msec=4500  True Az=112.995  Ze=-149.595  Az status=0008  Ze status=0009
10:17:03 Check angles
10:17:03 SkyScan query
10:17:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.52<-23368  Statuses=0008 0009
10:17:03 Msec=5250  True Az=112.995  Ze=-170.52  Az status=0008  Ze status=0009
10:17:03 Check angles
10:17:03 SkyScan query
10:17:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:17:04 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:17:04 Message to Master queued w/err=0: serial=190328 error=0
10:17:09 Received message from Master: op=Filter serial=190329
10:17:09 Color wheel filter change from 0 to 0
10:17:09 FLIGetFilterPos err=0  currentPosition=0
10:17:09 FLIGetStepsRemaining err=0  RemainingSteps=0
10:17:09 Filter is already there-color wheel unchanged
10:17:09 Received message from Master: op=Shutter serial=190330
10:17:09 Shutter LASER open
10:17:09 Received message from Camera: op=State serial=190332
10:17:09 GetSingleValue result=40  Value=cccccccc
10:17:09 SkyScan query
10:17:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:17:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:17:10 Parameters OK
10:17:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:17:10 Set A/D data flow result=40
10:17:10 Set A/D channel type result=40
10:17:10 Set A/D encoding result=40
10:17:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:17:10 Set channel filter=0.000000e+000  result=40
10:17:10 Config A/D  Result=40
10:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:17:10 Get A/D filter: -9.255963e+061  result=40
10:17:10 Get A/D value=-858993460  result=40
10:17:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:17:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:17:10 Parameters OK
10:17:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:17:10 Set A/D data flow result=40
10:17:10 Set A/D channel type result=40
10:17:10 Set A/D encoding result=40
10:17:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:17:10 Set channel filter=0.000000e+000  result=40
10:17:10 Config A/D  Result=40
10:17:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:17:10 Get A/D filter: -9.255963e+061  result=40
10:17:10 Get A/D value=-858993460  result=40
10:17:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:17:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:17:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:17:10 Aux=
10:17:10 Message to Camera, serial 190332 queued
10:17:18 Received message from Master: op=Shutter serial=190342
10:17:18 Shutter LASER close
10:17:19 Received message from Master: op=PointingHead serial=190346
10:17:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:17:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:17:19 Point started: ret=0
10:17:19 point_skyscan result=0
10:17:20 Check angles
10:17:20 SkyScan query
10:17:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.265<-21551  Statuses=0008 0009
10:17:20 Msec=0  True Az=112.995  Ze=-143.265  Az status=0008  Ze status=0009
10:17:21 Check angles
10:17:21 SkyScan query
10:17:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.31<-20154  Statuses=0008 0009
10:17:21 Msec=750  True Az=112.995  Ze=-122.31  Az status=0008  Ze status=0009
10:17:21 Check angles
10:17:21 SkyScan query
10:17:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.355<-18757  Statuses=0008 0009
10:17:22 Msec=1500  True Az=112.995  Ze=-101.355  Az status=0008  Ze status=0009
10:17:22 Check angles
10:17:22 SkyScan query
10:17:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.385<-17359  Statuses=0008 0009
10:17:23 Msec=2250  True Az=112.995  Ze=-80.385  Az status=0008  Ze status=0009
10:17:23 Check angles
10:17:23 SkyScan query
10:17:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.445<-15963  Statuses=0008 0009
10:17:23 Msec=3000  True Az=112.995  Ze=-59.445  Az status=0008  Ze status=0009
10:17:24 Check angles
10:17:24 SkyScan query
10:17:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.475<-14565  Statuses=0008 0009
10:17:24 Msec=3750  True Az=112.995  Ze=-38.475  Az status=0008  Ze status=0009
10:17:24 Check angles
10:17:24 SkyScan query
10:17:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.535<-13169  Statuses=0008 0009
10:17:25 Msec=4500  True Az=112.995  Ze=-17.535  Az status=0008  Ze status=0009
10:17:25 Check angles
10:17:25 SkyScan query
10:17:26 SkyScan query done: ret=0  az=112.995<-7533  ze=3.435<-11771  Statuses=0008 0009
10:17:26 Msec=5250  True Az=112.995  Ze=3.435  Az status=0008  Ze status=0009
10:17:26 Check angles
10:17:26 SkyScan query
10:17:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:17:26 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:17:26 Message to Master queued w/err=0: serial=190346 error=0
10:17:31 Received message from Master: op=Filter serial=190347
10:17:31 Color wheel filter change from 0 to 0
10:17:31 FLIGetFilterPos err=0  currentPosition=0
10:17:31 FLIGetStepsRemaining err=0  RemainingSteps=0
10:17:31 Filter is already there-color wheel unchanged
10:17:32 Received message from Master: op=Shutter serial=190348
10:17:32 Shutter LASER close
10:17:32 Received message from Camera: op=State serial=190350
10:17:32 GetSingleValue result=40  Value=cccccccc
10:17:32 SkyScan query
10:17:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:17:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:17:32 Parameters OK
10:17:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:17:32 Set A/D data flow result=40
10:17:32 Set A/D channel type result=40
10:17:32 Set A/D encoding result=40
10:17:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:17:32 Set channel filter=0.000000e+000  result=40
10:17:32 Config A/D  Result=40
10:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:17:32 Get A/D filter: -9.255963e+061  result=40
10:17:32 Get A/D value=-858993460  result=40
10:17:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:17:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:17:32 Parameters OK
10:17:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:17:32 Set A/D data flow result=40
10:17:32 Set A/D channel type result=40
10:17:32 Set A/D encoding result=40
10:17:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:17:32 Set channel filter=0.000000e+000  result=40
10:17:32 Config A/D  Result=40
10:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:17:32 Get A/D filter: -9.255963e+061  result=40
10:17:32 Get A/D value=-858993460  result=40
10:17:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:17:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:17:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:17:32 Aux=
10:17:32 Message to Camera, serial 190350 queued
10:18:09 Received message from Master: op=PointingHead serial=190363
10:18:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:18:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:18:09 Point started: ret=0
10:18:09 point_skyscan result=0
10:18:10 Check angles
10:18:10 SkyScan query
10:18:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:18:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:18:11 Message to Master queued w/err=0: serial=190363 error=0
10:18:16 Received message from Master: op=Filter serial=190364
10:18:16 Color wheel filter change from 0 to 0
10:18:16 FLIGetFilterPos err=0  currentPosition=0
10:18:16 FLIGetStepsRemaining err=0  RemainingSteps=0
10:18:16 Filter is already there-color wheel unchanged
10:18:16 Received message from Master: op=Shutter serial=190365
10:18:16 Shutter LASER close
10:18:16 Received message from Camera: op=State serial=190367
10:18:16 GetSingleValue result=40  Value=cccccccc
10:18:16 SkyScan query
10:18:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:18:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:18:17 Parameters OK
10:18:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:18:17 Set A/D data flow result=40
10:18:17 Set A/D channel type result=40
10:18:17 Set A/D encoding result=40
10:18:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:18:17 Set channel filter=0.000000e+000  result=40
10:18:17 Config A/D  Result=40
10:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:18:17 Get A/D filter: -9.255963e+061  result=40
10:18:17 Get A/D value=-858993460  result=40
10:18:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:18:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:18:17 Parameters OK
10:18:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:18:17 Set A/D data flow result=40
10:18:17 Set A/D channel type result=40
10:18:17 Set A/D encoding result=40
10:18:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:18:17 Set channel filter=0.000000e+000  result=40
10:18:17 Config A/D  Result=40
10:18:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:18:17 Get A/D filter: -9.255963e+061  result=40
10:18:17 Get A/D value=-858993460  result=40
10:18:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:18:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:18:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:18:17 Aux=
10:18:17 Message to Camera, serial 190367 queued
10:18:53 Received message from Master: op=PointingHead serial=190379
10:18:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:18:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:18:53 Point started: ret=0
10:18:53 point_skyscan result=0
10:18:54 Check angles
10:18:54 SkyScan query
10:18:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:18:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:18:54 Message to Master queued w/err=0: serial=190379 error=0
10:18:59 Received message from Master: op=Filter serial=190380
10:18:59 Color wheel filter change from 0 to 0
10:18:59 FLIGetFilterPos err=0  currentPosition=0
10:18:59 FLIGetStepsRemaining err=0  RemainingSteps=0
10:18:59 Filter is already there-color wheel unchanged
10:18:59 Received message from Master: op=Shutter serial=190381
10:18:59 Shutter LASER close
10:18:59 Received message from Camera: op=State serial=190383
10:18:59 GetSingleValue result=40  Value=cccccccc
10:18:59 SkyScan query
10:19:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:19:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:19:00 Parameters OK
10:19:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:19:00 Set A/D data flow result=40
10:19:00 Set A/D channel type result=40
10:19:00 Set A/D encoding result=40
10:19:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:19:00 Set channel filter=0.000000e+000  result=40
10:19:00 Config A/D  Result=40
10:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:19:00 Get A/D filter: -9.255963e+061  result=40
10:19:00 Get A/D value=-858993460  result=40
10:19:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:19:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:19:00 Parameters OK
10:19:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:19:00 Set A/D data flow result=40
10:19:00 Set A/D channel type result=40
10:19:00 Set A/D encoding result=40
10:19:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:19:00 Set channel filter=0.000000e+000  result=40
10:19:00 Config A/D  Result=40
10:19:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:19:00 Get A/D filter: -9.255963e+061  result=40
10:19:00 Get A/D value=-858993460  result=40
10:19:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:19:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:19:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:19:00 Aux=
10:19:00 Message to Camera, serial 190383 queued
10:19:37 Received message from Master: op=PointingHead serial=190396
10:19:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:19:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:19:37 Point started: ret=0
10:19:37 point_skyscan result=0
10:19:38 Check angles
10:19:38 SkyScan query
10:19:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:19:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:19:39 Message to Master queued w/err=0: serial=190396 error=0
10:19:44 Received message from Master: op=Filter serial=190397
10:19:44 Color wheel filter change from 0 to 0
10:19:44 FLIGetFilterPos err=0  currentPosition=0
10:19:44 FLIGetStepsRemaining err=0  RemainingSteps=0
10:19:44 Filter is already there-color wheel unchanged
10:19:44 Received message from Master: op=Shutter serial=190398
10:19:44 Shutter LASER close
10:19:44 Received message from Camera: op=State serial=190400
10:19:44 GetSingleValue result=40  Value=cccccccc
10:19:44 SkyScan query
10:19:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:19:44 Parameters OK
10:19:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:19:44 Set A/D data flow result=40
10:19:44 Set A/D channel type result=40
10:19:44 Set A/D encoding result=40
10:19:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:19:44 Set channel filter=0.000000e+000  result=40
10:19:44 Config A/D  Result=40
10:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:19:44 Get A/D filter: -9.255963e+061  result=40
10:19:44 Get A/D value=-858993460  result=40
10:19:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:19:44 Parameters OK
10:19:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:19:44 Set A/D data flow result=40
10:19:44 Set A/D channel type result=40
10:19:44 Set A/D encoding result=40
10:19:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:19:44 Set channel filter=0.000000e+000  result=40
10:19:44 Config A/D  Result=40
10:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:19:44 Get A/D filter: -9.255963e+061  result=40
10:19:44 Get A/D value=-858993460  result=40
10:19:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:19:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:19:44 Aux=
10:19:44 Message to Camera, serial 190400 queued
10:20:21 Received message from Master: op=PointingHead serial=190413
10:20:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:20:21 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:20:22 Point started: ret=0
10:20:22 point_skyscan result=0
10:20:22 Check angles
10:20:22 SkyScan query
10:20:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
10:20:23 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
10:20:23 Check angles
10:20:23 SkyScan query
10:20:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
10:20:24 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
10:20:24 Check angles
10:20:24 SkyScan query
10:20:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.07<-16338  Statuses=0008 0009
10:20:24 Msec=1500  True Az=112.995  Ze=-65.07  Az status=0008  Ze status=0009
10:20:25 Check angles
10:20:25 SkyScan query
10:20:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.04<-17736  Statuses=0008 0009
10:20:25 Msec=2250  True Az=112.995  Ze=-86.04  Az status=0008  Ze status=0009
10:20:25 Check angles
10:20:25 SkyScan query
10:20:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.98<-19132  Statuses=0008 0009
10:20:26 Msec=3000  True Az=112.995  Ze=-106.98  Az status=0008  Ze status=0009
10:20:26 Check angles
10:20:26 SkyScan query
10:20:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
10:20:27 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
10:20:27 Check angles
10:20:27 SkyScan query
10:20:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.89<-21926  Statuses=0008 0009
10:20:27 Msec=4500  True Az=112.995  Ze=-148.89  Az status=0008  Ze status=0009
10:20:28 Check angles
10:20:28 SkyScan query
10:20:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.83<-23322  Statuses=0008 0009
10:20:28 Msec=5250  True Az=112.995  Ze=-169.83  Az status=0008  Ze status=0009
10:20:28 Check angles
10:20:28 SkyScan query
10:20:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:20:29 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:20:29 Message to Master queued w/err=0: serial=190413 error=0
10:20:34 Received message from Master: op=Filter serial=190414
10:20:34 Color wheel filter change from 0 to 0
10:20:34 FLIGetFilterPos err=0  currentPosition=0
10:20:34 FLIGetStepsRemaining err=0  RemainingSteps=0
10:20:34 Filter is already there-color wheel unchanged
10:20:34 Received message from Master: op=Shutter serial=190415
10:20:34 Shutter LASER open
10:20:34 Received message from Camera: op=State serial=190417
10:20:34 GetSingleValue result=40  Value=cccccccc
10:20:34 SkyScan query
10:20:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:20:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:20:35 Parameters OK
10:20:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:20:35 Set A/D data flow result=40
10:20:35 Set A/D channel type result=40
10:20:35 Set A/D encoding result=40
10:20:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:20:35 Set channel filter=0.000000e+000  result=40
10:20:35 Config A/D  Result=40
10:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:20:35 Get A/D filter: -9.255963e+061  result=40
10:20:35 Get A/D value=-858993460  result=40
10:20:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:20:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:20:35 Parameters OK
10:20:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:20:35 Set A/D data flow result=40
10:20:35 Set A/D channel type result=40
10:20:35 Set A/D encoding result=40
10:20:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:20:35 Set channel filter=0.000000e+000  result=40
10:20:35 Config A/D  Result=40
10:20:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:20:35 Get A/D filter: -9.255963e+061  result=40
10:20:35 Get A/D value=-858993460  result=40
10:20:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:20:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:20:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:20:35 Aux=
10:20:35 Message to Camera, serial 190417 queued
10:20:43 Received message from Master: op=Shutter serial=190427
10:20:43 Shutter LASER close
10:20:44 Received message from Master: op=PointingHead serial=190431
10:20:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:20:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:20:44 Point started: ret=0
10:20:44 point_skyscan result=0
10:20:45 Check angles
10:20:45 SkyScan query
10:20:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.16<-21544  Statuses=0008 0009
10:20:45 Msec=0  True Az=112.995  Ze=-143.16  Az status=0008  Ze status=0009
10:20:46 Check angles
10:20:46 SkyScan query
10:20:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.755<-20117  Statuses=0008 0009
10:20:46 Msec=750  True Az=112.995  Ze=-121.755  Az status=0008  Ze status=0009
10:20:46 Check angles
10:20:46 SkyScan query
10:20:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.815<-18721  Statuses=0008 0009
10:20:47 Msec=1500  True Az=112.995  Ze=-100.815  Az status=0008  Ze status=0009
10:20:47 Check angles
10:20:47 SkyScan query
10:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.875<-17325  Statuses=0008 0009
10:20:48 Msec=2250  True Az=112.995  Ze=-79.875  Az status=0008  Ze status=0009
10:20:48 Check angles
10:20:48 SkyScan query
10:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.935<-15929  Statuses=0008 0009
10:20:48 Msec=3000  True Az=112.995  Ze=-58.935  Az status=0008  Ze status=0009
10:20:49 Check angles
10:20:49 SkyScan query
10:20:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.95<-14530  Statuses=0008 0009
10:20:49 Msec=3750  True Az=112.995  Ze=-37.95  Az status=0008  Ze status=0009
10:20:49 Check angles
10:20:49 SkyScan query
10:20:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.995<-13133  Statuses=0008 0009
10:20:50 Msec=4500  True Az=112.995  Ze=-16.995  Az status=0008  Ze status=0009
10:20:50 Check angles
10:20:50 SkyScan query
10:20:51 SkyScan query done: ret=0  az=112.995<-7533  ze=3.96<-11736  Statuses=0008 0009
10:20:51 Msec=5250  True Az=112.995  Ze=3.96  Az status=0008  Ze status=0009
10:20:51 Check angles
10:20:51 SkyScan query
10:20:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:20:51 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:20:51 Message to Master queued w/err=0: serial=190431 error=0
10:20:56 Received message from Master: op=Filter serial=190432
10:20:56 Color wheel filter change from 0 to 0
10:20:56 FLIGetFilterPos err=0  currentPosition=0
10:20:56 FLIGetStepsRemaining err=0  RemainingSteps=0
10:20:56 Filter is already there-color wheel unchanged
10:20:57 Received message from Master: op=Shutter serial=190433
10:20:57 Shutter LASER close
10:20:57 Received message from Camera: op=State serial=190435
10:20:57 GetSingleValue result=40  Value=cccccccc
10:20:57 SkyScan query
10:20:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:20:57 Parameters OK
10:20:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:20:57 Set A/D data flow result=40
10:20:57 Set A/D channel type result=40
10:20:57 Set A/D encoding result=40
10:20:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:20:57 Set channel filter=0.000000e+000  result=40
10:20:57 Config A/D  Result=40
10:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:20:57 Get A/D filter: -9.255963e+061  result=40
10:20:57 Get A/D value=-858993460  result=40
10:20:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:20:57 Parameters OK
10:20:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:20:57 Set A/D data flow result=40
10:20:57 Set A/D channel type result=40
10:20:57 Set A/D encoding result=40
10:20:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:20:57 Set channel filter=0.000000e+000  result=40
10:20:57 Config A/D  Result=40
10:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:20:57 Get A/D filter: -9.255963e+061  result=40
10:20:57 Get A/D value=-858993460  result=40
10:20:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:20:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:20:57 Aux=
10:20:57 Message to Camera, serial 190435 queued
10:21:34 Received message from Master: op=PointingHead serial=190448
10:21:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:21:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:21:35 Point started: ret=0
10:21:35 point_skyscan result=0
10:21:35 Check angles
10:21:35 SkyScan query
10:21:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:21:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:21:36 Message to Master queued w/err=0: serial=190448 error=0
10:21:41 Received message from Master: op=Filter serial=190449
10:21:41 Color wheel filter change from 0 to 0
10:21:41 FLIGetFilterPos err=0  currentPosition=0
10:21:41 FLIGetStepsRemaining err=0  RemainingSteps=0
10:21:41 Filter is already there-color wheel unchanged
10:21:41 Received message from Master: op=Shutter serial=190450
10:21:41 Shutter LASER close
10:21:41 Received message from Camera: op=State serial=190452
10:21:41 GetSingleValue result=40  Value=cccccccc
10:21:41 SkyScan query
10:21:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:21:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:21:42 Parameters OK
10:21:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:21:42 Set A/D data flow result=40
10:21:42 Set A/D channel type result=40
10:21:42 Set A/D encoding result=40
10:21:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:21:42 Set channel filter=0.000000e+000  result=40
10:21:42 Config A/D  Result=40
10:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:21:42 Get A/D filter: -9.255963e+061  result=40
10:21:42 Get A/D value=-858993460  result=40
10:21:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:21:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:21:42 Parameters OK
10:21:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:21:42 Set A/D data flow result=40
10:21:42 Set A/D channel type result=40
10:21:42 Set A/D encoding result=40
10:21:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:21:42 Set channel filter=0.000000e+000  result=40
10:21:42 Config A/D  Result=40
10:21:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:21:42 Get A/D filter: -9.255963e+061  result=40
10:21:42 Get A/D value=-858993460  result=40
10:21:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:21:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:21:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:21:42 Aux=
10:21:42 Message to Camera, serial 190452 queued
10:22:19 Received message from Master: op=PointingHead serial=190465
10:22:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:22:19 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:22:19 Point started: ret=0
10:22:19 point_skyscan result=0
10:22:20 Check angles
10:22:20 SkyScan query
10:22:20 SkyScan query done: ret=0  az=136.335<-9089  ze=-6.51<-12434  Statuses=0009 0008
10:22:20 Msec=0  True Az=136.335  Ze=-6.51  Az status=0009  Ze status=0008
10:22:20 Check angles
10:22:20 SkyScan query
10:22:21 SkyScan query done: ret=0  az=154.17<-10278  ze=-6.495<-12433  Statuses=0009 0008
10:22:21 Msec=750  True Az=154.17  Ze=-6.495  Az status=0009  Ze status=0008
10:22:21 Check angles
10:22:21 SkyScan query
10:22:22 SkyScan query done: ret=0  az=171.63<-11442  ze=-6.495<-12433  Statuses=0009 0008
10:22:22 Msec=1500  True Az=171.63  Ze=-6.495  Az status=0009  Ze status=0008
10:22:22 Check angles
10:22:22 SkyScan query
10:22:22 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:22:22 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:22:22 Message to Master queued w/err=0: serial=190465 error=0
10:22:27 Received message from Master: op=Filter serial=190466
10:22:27 Color wheel filter change from 0 to 0
10:22:27 FLIGetFilterPos err=0  currentPosition=0
10:22:27 FLIGetStepsRemaining err=0  RemainingSteps=0
10:22:27 Filter is already there-color wheel unchanged
10:22:28 Received message from Master: op=Shutter serial=190467
10:22:28 Shutter LASER close
10:22:28 Received message from Camera: op=State serial=190469
10:22:28 GetSingleValue result=40  Value=cccccccc
10:22:28 SkyScan query
10:22:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:22:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:22:28 Parameters OK
10:22:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:22:28 Set A/D data flow result=40
10:22:28 Set A/D channel type result=40
10:22:28 Set A/D encoding result=40
10:22:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:22:28 Set channel filter=0.000000e+000  result=40
10:22:28 Config A/D  Result=40
10:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:22:28 Get A/D filter: -9.255963e+061  result=40
10:22:28 Get A/D value=-858993460  result=40
10:22:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:22:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:22:28 Parameters OK
10:22:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:22:28 Set A/D data flow result=40
10:22:28 Set A/D channel type result=40
10:22:28 Set A/D encoding result=40
10:22:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:22:28 Set channel filter=0.000000e+000  result=40
10:22:28 Config A/D  Result=40
10:22:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:22:28 Get A/D filter: -9.255963e+061  result=40
10:22:28 Get A/D value=-858993460  result=40
10:22:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:22:28 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:22:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:22:28 Aux=
10:22:28 Message to Camera, serial 190469 queued
10:23:05 Received message from Master: op=PointingHead serial=190482
10:23:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:23:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:23:06 Point started: ret=0
10:23:06 point_skyscan result=0
10:23:06 Check angles
10:23:06 SkyScan query
10:23:07 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
10:23:07 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
10:23:07 Check angles
10:23:07 SkyScan query
10:23:08 SkyScan query done: ret=0  az=135.075<-9005  ze=6.495<-11567  Statuses=0009 0008
10:23:08 Msec=750  True Az=135.075  Ze=6.495  Az status=0009  Ze status=0008
10:23:08 Check angles
10:23:08 SkyScan query
10:23:08 SkyScan query done: ret=0  az=117.24<-7816  ze=6.495<-11567  Statuses=0009 0008
10:23:08 Msec=1500  True Az=117.24  Ze=6.495  Az status=0009  Ze status=0008
10:23:09 Check angles
10:23:09 SkyScan query
10:23:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:23:09 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:23:09 Message to Master queued w/err=0: serial=190482 error=0
10:23:14 Received message from Master: op=Filter serial=190483
10:23:14 Color wheel filter change from 0 to 0
10:23:14 FLIGetFilterPos err=0  currentPosition=0
10:23:14 FLIGetStepsRemaining err=0  RemainingSteps=0
10:23:14 Filter is already there-color wheel unchanged
10:23:14 Received message from Master: op=Shutter serial=190484
10:23:14 Shutter LASER close
10:23:14 Received message from Camera: op=State serial=190486
10:23:14 GetSingleValue result=40  Value=cccccccc
10:23:14 SkyScan query
10:23:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:23:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:23:15 Parameters OK
10:23:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:23:15 Set A/D data flow result=40
10:23:15 Set A/D channel type result=40
10:23:15 Set A/D encoding result=40
10:23:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:23:15 Set channel filter=0.000000e+000  result=40
10:23:15 Config A/D  Result=40
10:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:23:15 Get A/D filter: -9.255963e+061  result=40
10:23:15 Get A/D value=-858993460  result=40
10:23:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:23:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:23:15 Parameters OK
10:23:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:23:15 Set A/D data flow result=40
10:23:15 Set A/D channel type result=40
10:23:15 Set A/D encoding result=40
10:23:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:23:15 Set channel filter=0.000000e+000  result=40
10:23:15 Config A/D  Result=40
10:23:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:23:15 Get A/D filter: -9.255963e+061  result=40
10:23:15 Get A/D value=-858993460  result=40
10:23:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:23:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:23:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:23:15 Aux=
10:23:15 Message to Camera, serial 190486 queued
[UTC 2019-3-9  10:23:48]
10:23:52 Received message from Master: op=PointingHead serial=190499
10:23:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:23:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:23:52 Point started: ret=0
10:23:52 point_skyscan result=0
10:23:53 Check angles
10:23:53 SkyScan query
10:23:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.175<-13545  Statuses=0008 0009
10:23:53 Msec=0  True Az=112.995  Ze=-23.175  Az status=0008  Ze status=0009
10:23:54 Check angles
10:23:54 SkyScan query
10:23:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.16<-14944  Statuses=0008 0009
10:23:54 Msec=750  True Az=112.995  Ze=-44.16  Az status=0008  Ze status=0009
10:23:54 Check angles
10:23:54 SkyScan query
10:23:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.1<-16340  Statuses=0008 0009
10:23:55 Msec=1500  True Az=112.995  Ze=-65.1  Az status=0008  Ze status=0009
10:23:55 Check angles
10:23:55 SkyScan query
10:23:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.07<-17738  Statuses=0008 0009
10:23:56 Msec=2250  True Az=112.995  Ze=-86.07  Az status=0008  Ze status=0009
10:23:56 Check angles
10:23:56 SkyScan query
10:23:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.01<-19134  Statuses=0008 0009
10:23:56 Msec=3000  True Az=112.995  Ze=-107.01  Az status=0008  Ze status=0009
10:23:57 Check angles
10:23:57 SkyScan query
10:23:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.98<-20532  Statuses=0008 0009
10:23:57 Msec=3750  True Az=112.995  Ze=-127.98  Az status=0008  Ze status=0009
10:23:57 Check angles
10:23:57 SkyScan query
10:23:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.92<-21928  Statuses=0008 0009
10:23:58 Msec=4500  True Az=112.995  Ze=-148.92  Az status=0008  Ze status=0009
10:23:58 Check angles
10:23:58 SkyScan query
10:23:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.86<-23324  Statuses=0008 0009
10:23:59 Msec=5250  True Az=112.995  Ze=-169.86  Az status=0008  Ze status=0009
10:23:59 Check angles
10:23:59 SkyScan query
10:23:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:23:59 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:23:59 Message to Master queued w/err=0: serial=190499 error=0
10:24:04 Received message from Master: op=Filter serial=190500
10:24:04 Color wheel filter change from 0 to 0
10:24:04 FLIGetFilterPos err=0  currentPosition=0
10:24:04 FLIGetStepsRemaining err=0  RemainingSteps=0
10:24:04 Filter is already there-color wheel unchanged
10:24:05 Received message from Master: op=Shutter serial=190501
10:24:05 Shutter LASER open
10:24:05 Received message from Camera: op=State serial=190503
10:24:05 GetSingleValue result=40  Value=cccccccc
10:24:05 SkyScan query
10:24:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:24:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:24:05 Parameters OK
10:24:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:24:05 Set A/D data flow result=40
10:24:05 Set A/D channel type result=40
10:24:05 Set A/D encoding result=40
10:24:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:24:05 Set channel filter=0.000000e+000  result=40
10:24:05 Config A/D  Result=40
10:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:24:05 Get A/D filter: -9.255963e+061  result=40
10:24:05 Get A/D value=-858993460  result=40
10:24:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:24:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:24:05 Parameters OK
10:24:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:24:05 Set A/D data flow result=40
10:24:05 Set A/D channel type result=40
10:24:05 Set A/D encoding result=40
10:24:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:24:05 Set channel filter=0.000000e+000  result=40
10:24:05 Config A/D  Result=40
10:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:24:05 Get A/D filter: -9.255963e+061  result=40
10:24:05 Get A/D value=-858993460  result=40
10:24:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:24:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:24:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:24:05 Aux=
10:24:05 Message to Camera, serial 190503 queued
10:24:14 Received message from Master: op=Shutter serial=190513
10:24:14 Shutter LASER close
10:24:14 Received message from Master: op=PointingHead serial=190517
10:24:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:24:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:24:15 Point started: ret=0
10:24:15 point_skyscan result=0
10:24:15 Check angles
10:24:15 SkyScan query
10:24:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
10:24:16 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
10:24:16 Check angles
10:24:16 SkyScan query
10:24:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.115<-20141  Statuses=0008 0009
10:24:17 Msec=750  True Az=112.995  Ze=-122.115  Az status=0008  Ze status=0009
10:24:17 Check angles
10:24:17 SkyScan query
10:24:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.725<-18715  Statuses=0008 0009
10:24:17 Msec=1500  True Az=112.995  Ze=-100.725  Az status=0008  Ze status=0009
10:24:18 Check angles
10:24:18 SkyScan query
10:24:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.32<-17288  Statuses=0008 0009
10:24:18 Msec=2250  True Az=112.995  Ze=-79.32  Az status=0008  Ze status=0009
10:24:18 Check angles
10:24:18 SkyScan query
10:24:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.365<-15891  Statuses=0008 0009
10:24:19 Msec=3000  True Az=112.995  Ze=-58.365  Az status=0008  Ze status=0009
10:24:19 Check angles
10:24:19 SkyScan query
10:24:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.44<-14496  Statuses=0008 0009
10:24:20 Msec=3750  True Az=112.995  Ze=-37.44  Az status=0008  Ze status=0009
10:24:20 Check angles
10:24:20 SkyScan query
10:24:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.455<-13097  Statuses=0008 0009
10:24:20 Msec=4500  True Az=112.995  Ze=-16.455  Az status=0008  Ze status=0009
10:24:21 Check angles
10:24:21 SkyScan query
10:24:21 SkyScan query done: ret=0  az=112.995<-7533  ze=4.41<-11706  Statuses=0008 0009
10:24:21 Msec=5250  True Az=112.995  Ze=4.41  Az status=0008  Ze status=0009
10:24:21 Check angles
10:24:21 SkyScan query
10:24:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:24:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:24:22 Message to Master queued w/err=0: serial=190517 error=0
10:24:27 Received message from Master: op=Filter serial=190518
10:24:27 Color wheel filter change from 0 to 0
10:24:27 FLIGetFilterPos err=0  currentPosition=0
10:24:27 FLIGetStepsRemaining err=0  RemainingSteps=0
10:24:27 Filter is already there-color wheel unchanged
10:24:27 Received message from Master: op=Shutter serial=190519
10:24:27 Shutter LASER close
10:24:27 Received message from Camera: op=State serial=190521
10:24:27 GetSingleValue result=40  Value=cccccccc
10:24:27 SkyScan query
10:24:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:24:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:24:28 Parameters OK
10:24:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:24:28 Set A/D data flow result=40
10:24:28 Set A/D channel type result=40
10:24:28 Set A/D encoding result=40
10:24:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:24:28 Set channel filter=0.000000e+000  result=40
10:24:28 Config A/D  Result=40
10:24:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:24:28 Get A/D filter: -9.255963e+061  result=40
10:24:28 Get A/D value=-858993460  result=40
10:24:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:24:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:24:28 Parameters OK
10:24:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:24:28 Set A/D data flow result=40
10:24:28 Set A/D channel type result=40
10:24:28 Set A/D encoding result=40
10:24:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:24:28 Set channel filter=0.000000e+000  result=40
10:24:28 Config A/D  Result=40
10:24:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:24:28 Get A/D filter: -9.255963e+061  result=40
10:24:28 Get A/D value=-858993460  result=40
10:24:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:24:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:24:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:24:28 Aux=
10:24:28 Message to Camera, serial 190521 queued
10:25:05 Received message from Master: op=PointingHead serial=190534
10:25:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:25:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:25:05 Point started: ret=0
10:25:05 point_skyscan result=0
10:25:06 Check angles
10:25:06 SkyScan query
10:25:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:25:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:25:06 Message to Master queued w/err=0: serial=190534 error=0
10:25:11 Received message from Master: op=Filter serial=190535
10:25:11 Color wheel filter change from 0 to 0
10:25:11 FLIGetFilterPos err=0  currentPosition=0
10:25:11 FLIGetStepsRemaining err=0  RemainingSteps=0
10:25:11 Filter is already there-color wheel unchanged
10:25:12 Received message from Master: op=Shutter serial=190536
10:25:12 Shutter LASER close
10:25:12 Received message from Camera: op=State serial=190538
10:25:12 GetSingleValue result=40  Value=cccccccc
10:25:12 SkyScan query
10:25:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:25:12 Parameters OK
10:25:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:25:12 Set A/D data flow result=40
10:25:12 Set A/D channel type result=40
10:25:12 Set A/D encoding result=40
10:25:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:25:12 Set channel filter=0.000000e+000  result=40
10:25:12 Config A/D  Result=40
10:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:25:12 Get A/D filter: -9.255963e+061  result=40
10:25:12 Get A/D value=-858993460  result=40
10:25:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:25:12 Parameters OK
10:25:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:25:12 Set A/D data flow result=40
10:25:12 Set A/D channel type result=40
10:25:12 Set A/D encoding result=40
10:25:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:25:12 Set channel filter=0.000000e+000  result=40
10:25:12 Config A/D  Result=40
10:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:25:12 Get A/D filter: -9.255963e+061  result=40
10:25:12 Get A/D value=-858993460  result=40
10:25:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:25:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:25:12 Aux=
10:25:12 Message to Camera, serial 190538 queued
10:25:49 Received message from Master: op=PointingHead serial=190551
10:25:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:25:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:25:49 Point started: ret=0
10:25:49 point_skyscan result=0
10:25:50 Check angles
10:25:50 SkyScan query
10:25:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:25:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:25:51 Message to Master queued w/err=0: serial=190551 error=0
10:25:56 Received message from Master: op=Filter serial=190552
10:25:56 Color wheel filter change from 0 to 0
10:25:56 FLIGetFilterPos err=0  currentPosition=0
10:25:56 FLIGetStepsRemaining err=0  RemainingSteps=0
10:25:56 Filter is already there-color wheel unchanged
10:25:56 Received message from Master: op=Shutter serial=190553
10:25:56 Shutter LASER close
10:25:56 Received message from Camera: op=State serial=190555
10:25:56 GetSingleValue result=40  Value=cccccccc
10:25:56 SkyScan query
10:25:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:25:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:25:56 Parameters OK
10:25:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:25:56 Set A/D data flow result=40
10:25:56 Set A/D channel type result=40
10:25:56 Set A/D encoding result=40
10:25:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:25:56 Set channel filter=0.000000e+000  result=40
10:25:56 Config A/D  Result=40
10:25:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:25:56 Get A/D filter: -9.255963e+061  result=40
10:25:56 Get A/D value=-858993460  result=40
10:25:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:25:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:25:56 Parameters OK
10:25:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:25:56 Set A/D data flow result=40
10:25:56 Set A/D channel type result=40
10:25:56 Set A/D encoding result=40
10:25:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:25:56 Set channel filter=0.000000e+000  result=40
10:25:56 Config A/D  Result=40
10:25:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:25:56 Get A/D filter: -9.255963e+061  result=40
10:25:56 Get A/D value=-858993460  result=40
10:25:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:25:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:25:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:25:56 Aux=
10:25:56 Message to Camera, serial 190555 queued
10:26:32 Received message from Master: op=PointingHead serial=190567
10:26:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:26:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:26:33 Point started: ret=0
10:26:33 point_skyscan result=0
10:26:33 Check angles
10:26:33 SkyScan query
10:26:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:26:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:26:34 Message to Master queued w/err=0: serial=190567 error=0
10:26:39 Received message from Master: op=Filter serial=190568
10:26:39 Color wheel filter change from 0 to 0
10:26:39 FLIGetFilterPos err=0  currentPosition=0
10:26:39 FLIGetStepsRemaining err=0  RemainingSteps=0
10:26:39 Filter is already there-color wheel unchanged
10:26:39 Received message from Master: op=Shutter serial=190569
10:26:39 Shutter LASER close
10:26:39 Received message from Camera: op=State serial=190571
10:26:39 GetSingleValue result=40  Value=cccccccc
10:26:39 SkyScan query
10:26:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:26:40 Parameters OK
10:26:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:26:40 Set A/D data flow result=40
10:26:40 Set A/D channel type result=40
10:26:40 Set A/D encoding result=40
10:26:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:26:40 Set channel filter=0.000000e+000  result=40
10:26:40 Config A/D  Result=40
10:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:26:40 Get A/D filter: -9.255963e+061  result=40
10:26:40 Get A/D value=-858993460  result=40
10:26:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:26:40 Parameters OK
10:26:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:26:40 Set A/D data flow result=40
10:26:40 Set A/D channel type result=40
10:26:40 Set A/D encoding result=40
10:26:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:26:40 Set channel filter=0.000000e+000  result=40
10:26:40 Config A/D  Result=40
10:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:26:40 Get A/D filter: -9.255963e+061  result=40
10:26:40 Get A/D value=-858993460  result=40
10:26:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:26:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:26:40 Aux=
10:26:40 Message to Camera, serial 190571 queued
10:27:17 Received message from Master: op=PointingHead serial=190584
10:27:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:27:17 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:27:17 Point started: ret=0
10:27:17 point_skyscan result=0
10:27:18 Check angles
10:27:18 SkyScan query
10:27:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
10:27:18 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
10:27:18 Check angles
10:27:18 SkyScan query
10:27:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
10:27:19 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
10:27:19 Check angles
10:27:19 SkyScan query
10:27:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
10:27:20 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
10:27:20 Check angles
10:27:20 SkyScan query
10:27:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
10:27:21 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
10:27:21 Check angles
10:27:21 SkyScan query
10:27:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
10:27:21 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
10:27:21 Check angles
10:27:21 SkyScan query
10:27:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.55<-20570  Statuses=0008 0009
10:27:22 Msec=3750  True Az=112.995  Ze=-128.55  Az status=0008  Ze status=0009
10:27:22 Check angles
10:27:22 SkyScan query
10:27:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.55<-21970  Statuses=0008 0009
10:27:23 Msec=4500  True Az=112.995  Ze=-149.55  Az status=0008  Ze status=0009
10:27:23 Check angles
10:27:23 SkyScan query
10:27:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.46<-23364  Statuses=0008 0009
10:27:24 Msec=5250  True Az=112.995  Ze=-170.46  Az status=0008  Ze status=0009
10:27:24 Check angles
10:27:24 SkyScan query
10:27:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:27:24 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:27:24 Message to Master queued w/err=0: serial=190584 error=0
10:27:29 Received message from Master: op=Filter serial=190585
10:27:29 Color wheel filter change from 0 to 0
10:27:29 FLIGetFilterPos err=0  currentPosition=0
10:27:29 FLIGetStepsRemaining err=0  RemainingSteps=0
10:27:29 Filter is already there-color wheel unchanged
10:27:29 Received message from Master: op=Shutter serial=190586
10:27:29 Shutter LASER open
10:27:30 Received message from Camera: op=State serial=190588
10:27:30 GetSingleValue result=40  Value=cccccccc
10:27:30 SkyScan query
10:27:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:27:30 Parameters OK
10:27:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:27:30 Set A/D data flow result=40
10:27:30 Set A/D channel type result=40
10:27:30 Set A/D encoding result=40
10:27:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:27:30 Set channel filter=0.000000e+000  result=40
10:27:30 Config A/D  Result=40
10:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:27:30 Get A/D filter: -9.255963e+061  result=40
10:27:30 Get A/D value=-858993460  result=40
10:27:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:27:30 Parameters OK
10:27:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:27:30 Set A/D data flow result=40
10:27:30 Set A/D channel type result=40
10:27:30 Set A/D encoding result=40
10:27:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:27:30 Set channel filter=0.000000e+000  result=40
10:27:30 Config A/D  Result=40
10:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:27:30 Get A/D filter: -9.255963e+061  result=40
10:27:30 Get A/D value=-858993460  result=40
10:27:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:27:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:27:30 Aux=
10:27:30 Message to Camera, serial 190588 queued
10:27:39 Received message from Master: op=Shutter serial=190598
10:27:39 Shutter LASER close
10:27:39 Received message from Master: op=PointingHead serial=190602
10:27:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:27:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:27:40 Point started: ret=0
10:27:40 point_skyscan result=0
10:27:40 Check angles
10:27:40 SkyScan query
10:27:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.695<-21513  Statuses=0008 0009
10:27:41 Msec=0  True Az=112.995  Ze=-142.695  Az status=0008  Ze status=0009
10:27:41 Check angles
10:27:41 SkyScan query
10:27:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
10:27:42 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
10:27:42 Check angles
10:27:42 SkyScan query
10:27:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.8<-18720  Statuses=0008 0009
10:27:42 Msec=1500  True Az=112.995  Ze=-100.8  Az status=0008  Ze status=0009
10:27:43 Check angles
10:27:43 SkyScan query
10:27:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.32<-17288  Statuses=0008 0009
10:27:43 Msec=2250  True Az=112.995  Ze=-79.32  Az status=0008  Ze status=0009
10:27:43 Check angles
10:27:43 SkyScan query
10:27:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.99<-15866  Statuses=0008 0009
10:27:44 Msec=3000  True Az=112.995  Ze=-57.99  Az status=0008  Ze status=0009
10:27:44 Check angles
10:27:44 SkyScan query
10:27:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.08<-14472  Statuses=0008 0009
10:27:45 Msec=3750  True Az=112.995  Ze=-37.08  Az status=0008  Ze status=0009
10:27:45 Check angles
10:27:45 SkyScan query
10:27:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.08<-13072  Statuses=0008 0009
10:27:46 Msec=4500  True Az=112.995  Ze=-16.08  Az status=0008  Ze status=0009
10:27:46 Check angles
10:27:46 SkyScan query
10:27:46 SkyScan query done: ret=0  az=112.995<-7533  ze=4.68<-11688  Statuses=0008 0009
10:27:46 Msec=5250  True Az=112.995  Ze=4.68  Az status=0008  Ze status=0009
10:27:46 Check angles
10:27:46 SkyScan query
10:27:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:27:47 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:27:47 Message to Master queued w/err=0: serial=190602 error=0
10:27:52 Received message from Master: op=Filter serial=190603
10:27:52 Color wheel filter change from 0 to 0
10:27:52 FLIGetFilterPos err=0  currentPosition=0
10:27:52 FLIGetStepsRemaining err=0  RemainingSteps=0
10:27:52 Filter is already there-color wheel unchanged
10:27:52 Received message from Master: op=Shutter serial=190604
10:27:52 Shutter LASER close
10:27:52 Received message from Camera: op=State serial=190606
10:27:52 GetSingleValue result=40  Value=cccccccc
10:27:52 SkyScan query
10:27:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:27:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:27:53 Parameters OK
10:27:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:27:53 Set A/D data flow result=40
10:27:53 Set A/D channel type result=40
10:27:53 Set A/D encoding result=40
10:27:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:27:53 Set channel filter=0.000000e+000  result=40
10:27:53 Config A/D  Result=40
10:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:27:53 Get A/D filter: -9.255963e+061  result=40
10:27:53 Get A/D value=-858993460  result=40
10:27:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:27:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:27:53 Parameters OK
10:27:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:27:53 Set A/D data flow result=40
10:27:53 Set A/D channel type result=40
10:27:53 Set A/D encoding result=40
10:27:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:27:53 Set channel filter=0.000000e+000  result=40
10:27:53 Config A/D  Result=40
10:27:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:27:53 Get A/D filter: -9.255963e+061  result=40
10:27:53 Get A/D value=-858993460  result=40
10:27:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:27:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:27:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:27:53 Aux=
10:27:53 Message to Camera, serial 190606 queued
10:28:30 Received message from Master: op=PointingHead serial=190619
10:28:30 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:28:30 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:28:30 Point started: ret=0
10:28:30 point_skyscan result=0
10:28:31 Check angles
10:28:31 SkyScan query
10:28:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:28:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:28:31 Message to Master queued w/err=0: serial=190619 error=0
10:28:36 Received message from Master: op=Filter serial=190620
10:28:36 Color wheel filter change from 0 to 0
10:28:36 FLIGetFilterPos err=0  currentPosition=0
10:28:36 FLIGetStepsRemaining err=0  RemainingSteps=0
10:28:36 Filter is already there-color wheel unchanged
10:28:37 Received message from Master: op=Shutter serial=190621
10:28:37 Shutter LASER close
10:28:37 Received message from Camera: op=State serial=190623
10:28:37 GetSingleValue result=40  Value=cccccccc
10:28:37 SkyScan query
10:28:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:28:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:28:37 Parameters OK
10:28:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:28:37 Set A/D data flow result=40
10:28:37 Set A/D channel type result=40
10:28:37 Set A/D encoding result=40
10:28:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:28:37 Set channel filter=0.000000e+000  result=40
10:28:37 Config A/D  Result=40
10:28:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:28:37 Get A/D filter: -9.255963e+061  result=40
10:28:37 Get A/D value=-858993460  result=40
10:28:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:28:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:28:37 Parameters OK
10:28:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:28:37 Set A/D data flow result=40
10:28:37 Set A/D channel type result=40
10:28:37 Set A/D encoding result=40
10:28:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:28:37 Set channel filter=0.000000e+000  result=40
10:28:37 Config A/D  Result=40
10:28:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:28:37 Get A/D filter: -9.255963e+061  result=40
10:28:37 Get A/D value=-858993460  result=40
10:28:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:28:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:28:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:28:37 Aux=
10:28:37 Message to Camera, serial 190623 queued
10:29:14 Received message from Master: op=PointingHead serial=190636
10:29:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:29:14 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:29:14 Point started: ret=0
10:29:14 point_skyscan result=0
10:29:15 Check angles
10:29:15 SkyScan query
10:29:16 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
10:29:16 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
10:29:16 Check angles
10:29:16 SkyScan query
10:29:16 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
10:29:16 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
10:29:17 Check angles
10:29:17 SkyScan query
10:29:17 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
10:29:17 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
10:29:17 Check angles
10:29:17 SkyScan query
10:29:18 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:29:18 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:29:18 Message to Master queued w/err=0: serial=190636 error=0
10:29:23 Received message from Master: op=Filter serial=190637
10:29:23 Color wheel filter change from 0 to 0
10:29:23 FLIGetFilterPos err=0  currentPosition=0
10:29:23 FLIGetStepsRemaining err=0  RemainingSteps=0
10:29:23 Filter is already there-color wheel unchanged
10:29:23 Received message from Master: op=Shutter serial=190638
10:29:23 Shutter LASER close
10:29:23 Received message from Camera: op=State serial=190640
10:29:23 GetSingleValue result=40  Value=cccccccc
10:29:23 SkyScan query
10:29:24 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:29:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:29:24 Parameters OK
10:29:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:29:24 Set A/D data flow result=40
10:29:24 Set A/D channel type result=40
10:29:24 Set A/D encoding result=40
10:29:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:29:24 Set channel filter=0.000000e+000  result=40
10:29:24 Config A/D  Result=40
10:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:29:24 Get A/D filter: -9.255963e+061  result=40
10:29:24 Get A/D value=-858993460  result=40
10:29:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:29:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:29:24 Parameters OK
10:29:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:29:24 Set A/D data flow result=40
10:29:24 Set A/D channel type result=40
10:29:24 Set A/D encoding result=40
10:29:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:29:24 Set channel filter=0.000000e+000  result=40
10:29:24 Config A/D  Result=40
10:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:29:24 Get A/D filter: -9.255963e+061  result=40
10:29:24 Get A/D value=-858993460  result=40
10:29:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:29:24 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:29:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:29:24 Aux=
10:29:24 Message to Camera, serial 190640 queued
10:30:01 Received message from Master: op=PointingHead serial=190653
10:30:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:30:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:30:01 Point started: ret=0
10:30:01 point_skyscan result=0
10:30:02 Check angles
10:30:02 SkyScan query
10:30:02 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
10:30:02 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
10:30:02 Check angles
10:30:02 SkyScan query
10:30:03 SkyScan query done: ret=0  az=135.075<-9005  ze=6.495<-11567  Statuses=0009 0008
10:30:03 Msec=750  True Az=135.075  Ze=6.495  Az status=0009  Ze status=0008
10:30:03 Check angles
10:30:03 SkyScan query
10:30:04 SkyScan query done: ret=0  az=117.27<-7818  ze=6.495<-11567  Statuses=0009 0008
10:30:04 Msec=1500  True Az=117.27  Ze=6.495  Az status=0009  Ze status=0008
10:30:04 Check angles
10:30:04 SkyScan query
10:30:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:30:05 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:30:05 Message to Master queued w/err=0: serial=190653 error=0
10:30:10 Received message from Master: op=Filter serial=190654
10:30:10 Color wheel filter change from 0 to 0
10:30:10 FLIGetFilterPos err=0  currentPosition=0
10:30:10 FLIGetStepsRemaining err=0  RemainingSteps=0
10:30:10 Filter is already there-color wheel unchanged
10:30:10 Received message from Master: op=Shutter serial=190655
10:30:10 Shutter LASER close
10:30:10 Received message from Camera: op=State serial=190657
10:30:10 GetSingleValue result=40  Value=cccccccc
10:30:10 SkyScan query
10:30:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:30:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:30:10 Parameters OK
10:30:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:30:10 Set A/D data flow result=40
10:30:10 Set A/D channel type result=40
10:30:10 Set A/D encoding result=40
10:30:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:30:10 Set channel filter=0.000000e+000  result=40
10:30:10 Config A/D  Result=40
10:30:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:30:10 Get A/D filter: -9.255963e+061  result=40
10:30:10 Get A/D value=-858993460  result=40
10:30:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:30:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:30:10 Parameters OK
10:30:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:30:10 Set A/D data flow result=40
10:30:10 Set A/D channel type result=40
10:30:10 Set A/D encoding result=40
10:30:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:30:10 Set channel filter=0.000000e+000  result=40
10:30:10 Config A/D  Result=40
10:30:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:30:10 Get A/D filter: -9.255963e+061  result=40
10:30:10 Get A/D value=-858993460  result=40
10:30:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:30:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:30:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:30:10 Aux=
10:30:10 Message to Camera, serial 190657 queued
10:30:47 Received message from Master: op=PointingHead serial=190670
10:30:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:30:47 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:30:48 Point started: ret=0
10:30:48 point_skyscan result=0
10:30:48 Check angles
10:30:48 SkyScan query
10:30:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.595<-13573  Statuses=0008 0009
10:30:49 Msec=0  True Az=112.995  Ze=-23.595  Az status=0008  Ze status=0009
10:30:49 Check angles
10:30:49 SkyScan query
10:30:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.55<-14970  Statuses=0008 0009
10:30:50 Msec=750  True Az=112.995  Ze=-44.55  Az status=0008  Ze status=0009
10:30:50 Check angles
10:30:50 SkyScan query
10:30:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
10:30:50 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
10:30:51 Check angles
10:30:51 SkyScan query
10:30:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.46<-17764  Statuses=0008 0009
10:30:51 Msec=2250  True Az=112.995  Ze=-86.46  Az status=0008  Ze status=0009
10:30:51 Check angles
10:30:51 SkyScan query
10:30:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.4<-19160  Statuses=0008 0009
10:30:52 Msec=3000  True Az=112.995  Ze=-107.4  Az status=0008  Ze status=0009
10:30:52 Check angles
10:30:52 SkyScan query
10:30:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.355<-20557  Statuses=0008 0009
10:30:53 Msec=3750  True Az=112.995  Ze=-128.355  Az status=0008  Ze status=0009
10:30:53 Check angles
10:30:53 SkyScan query
10:30:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.325<-21955  Statuses=0008 0009
10:30:53 Msec=4500  True Az=112.995  Ze=-149.325  Az status=0008  Ze status=0009
10:30:54 Check angles
10:30:54 SkyScan query
10:30:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.655<-23377  Statuses=0008 0009
10:30:54 Msec=5250  True Az=112.995  Ze=-170.655  Az status=0008  Ze status=0009
10:30:54 Check angles
10:30:54 SkyScan query
10:30:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:30:55 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:30:55 Message to Master queued w/err=0: serial=190670 error=0
10:31:00 Received message from Master: op=Filter serial=190671
10:31:00 Color wheel filter change from 0 to 0
10:31:00 FLIGetFilterPos err=0  currentPosition=0
10:31:00 FLIGetStepsRemaining err=0  RemainingSteps=0
10:31:00 Filter is already there-color wheel unchanged
10:31:00 Received message from Master: op=Shutter serial=190672
10:31:00 Shutter LASER open
10:31:00 Received message from Camera: op=State serial=190674
10:31:00 GetSingleValue result=40  Value=cccccccc
10:31:00 SkyScan query
10:31:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:31:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:31:01 Parameters OK
10:31:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:31:01 Set A/D data flow result=40
10:31:01 Set A/D channel type result=40
10:31:01 Set A/D encoding result=40
10:31:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:31:01 Set channel filter=0.000000e+000  result=40
10:31:01 Config A/D  Result=40
10:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:31:01 Get A/D filter: -9.255963e+061  result=40
10:31:01 Get A/D value=-858993460  result=40
10:31:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:31:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:31:01 Parameters OK
10:31:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:31:01 Set A/D data flow result=40
10:31:01 Set A/D channel type result=40
10:31:01 Set A/D encoding result=40
10:31:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:31:01 Set channel filter=0.000000e+000  result=40
10:31:01 Config A/D  Result=40
10:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:31:01 Get A/D filter: -9.255963e+061  result=40
10:31:01 Get A/D value=-858993460  result=40
10:31:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:31:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:31:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:31:01 Aux=
10:31:01 Message to Camera, serial 190674 queued
10:31:09 Received message from Master: op=Shutter serial=190684
10:31:09 Shutter LASER close
10:31:10 Received message from Master: op=PointingHead serial=190688
10:31:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:31:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:31:10 Point started: ret=0
10:31:10 point_skyscan result=0
10:31:11 Check angles
10:31:11 SkyScan query
10:31:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
10:31:11 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
10:31:12 Check angles
10:31:12 SkyScan query
10:31:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.52<-20168  Statuses=0008 0009
10:31:12 Msec=750  True Az=112.995  Ze=-122.52  Az status=0008  Ze status=0009
10:31:12 Check angles
10:31:12 SkyScan query
10:31:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.115<-18741  Statuses=0008 0009
10:31:13 Msec=1500  True Az=112.995  Ze=-101.115  Az status=0008  Ze status=0009
10:31:13 Check angles
10:31:13 SkyScan query
10:31:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.16<-17344  Statuses=0008 0009
10:31:14 Msec=2250  True Az=112.995  Ze=-80.16  Az status=0008  Ze status=0009
10:31:14 Check angles
10:31:14 SkyScan query
10:31:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.205<-15947  Statuses=0008 0009
10:31:14 Msec=3000  True Az=112.995  Ze=-59.205  Az status=0008  Ze status=0009
10:31:15 Check angles
10:31:15 SkyScan query
10:31:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.8<-14520  Statuses=0008 0009
10:31:15 Msec=3750  True Az=112.995  Ze=-37.8  Az status=0008  Ze status=0009
10:31:15 Check angles
10:31:15 SkyScan query
10:31:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.395<-13093  Statuses=0008 0009
10:31:16 Msec=4500  True Az=112.995  Ze=-16.395  Az status=0008  Ze status=0009
10:31:16 Check angles
10:31:16 SkyScan query
10:31:17 SkyScan query done: ret=0  az=112.995<-7533  ze=4.455<-11703  Statuses=0008 0009
10:31:17 Msec=5250  True Az=112.995  Ze=4.455  Az status=0008  Ze status=0009
10:31:17 Check angles
10:31:17 SkyScan query
10:31:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:31:17 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:31:17 Message to Master queued w/err=0: serial=190688 error=0
10:31:22 Received message from Master: op=Filter serial=190689
10:31:22 Color wheel filter change from 0 to 0
10:31:22 FLIGetFilterPos err=0  currentPosition=0
10:31:22 FLIGetStepsRemaining err=0  RemainingSteps=0
10:31:22 Filter is already there-color wheel unchanged
10:31:23 Received message from Master: op=Shutter serial=190690
10:31:23 Shutter LASER close
10:31:23 Received message from Camera: op=State serial=190692
10:31:23 GetSingleValue result=40  Value=cccccccc
10:31:23 SkyScan query
10:31:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:31:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:31:23 Parameters OK
10:31:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:31:23 Set A/D data flow result=40
10:31:23 Set A/D channel type result=40
10:31:23 Set A/D encoding result=40
10:31:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:31:23 Set channel filter=0.000000e+000  result=40
10:31:23 Config A/D  Result=40
10:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:31:23 Get A/D filter: -9.255963e+061  result=40
10:31:23 Get A/D value=-858993460  result=40
10:31:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:31:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:31:23 Parameters OK
10:31:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:31:23 Set A/D data flow result=40
10:31:23 Set A/D channel type result=40
10:31:23 Set A/D encoding result=40
10:31:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:31:23 Set channel filter=0.000000e+000  result=40
10:31:23 Config A/D  Result=40
10:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:31:23 Get A/D filter: -9.255963e+061  result=40
10:31:23 Get A/D value=-858993460  result=40
10:31:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:31:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:31:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:31:23 Aux=
10:31:23 Message to Camera, serial 190692 queued
10:32:00 Received message from Master: op=PointingHead serial=190705
10:32:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:32:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:32:01 Point started: ret=0
10:32:01 point_skyscan result=0
10:32:01 Check angles
10:32:01 SkyScan query
10:32:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:32:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:32:02 Message to Master queued w/err=0: serial=190705 error=0
10:32:07 Received message from Master: op=Filter serial=190706
10:32:07 Color wheel filter change from 0 to 0
10:32:07 FLIGetFilterPos err=0  currentPosition=0
10:32:07 FLIGetStepsRemaining err=0  RemainingSteps=0
10:32:07 Filter is already there-color wheel unchanged
10:32:07 Received message from Master: op=Shutter serial=190707
10:32:07 Shutter LASER close
10:32:07 Received message from Camera: op=State serial=190709
10:32:07 GetSingleValue result=40  Value=cccccccc
10:32:07 SkyScan query
10:32:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:32:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:32:08 Parameters OK
10:32:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:32:08 Set A/D data flow result=40
10:32:08 Set A/D channel type result=40
10:32:08 Set A/D encoding result=40
10:32:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:32:08 Set channel filter=0.000000e+000  result=40
10:32:08 Config A/D  Result=40
10:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:32:08 Get A/D filter: -9.255963e+061  result=40
10:32:08 Get A/D value=-858993460  result=40
10:32:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:32:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:32:08 Parameters OK
10:32:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:32:08 Set A/D data flow result=40
10:32:08 Set A/D channel type result=40
10:32:08 Set A/D encoding result=40
10:32:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:32:08 Set channel filter=0.000000e+000  result=40
10:32:08 Config A/D  Result=40
10:32:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:32:08 Get A/D filter: -9.255963e+061  result=40
10:32:08 Get A/D value=-858993460  result=40
10:32:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:32:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:32:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:32:08 Aux=
10:32:08 Message to Camera, serial 190709 queued
10:32:44 Received message from Master: op=PointingHead serial=190721
10:32:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:32:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:32:44 Point started: ret=0
10:32:44 point_skyscan result=0
10:32:45 Check angles
10:32:45 SkyScan query
10:32:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:32:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:32:45 Message to Master queued w/err=0: serial=190721 error=0
10:32:50 Received message from Master: op=Filter serial=190722
10:32:50 Color wheel filter change from 0 to 0
10:32:50 FLIGetFilterPos err=0  currentPosition=0
10:32:50 FLIGetStepsRemaining err=0  RemainingSteps=0
10:32:50 Filter is already there-color wheel unchanged
10:32:50 Received message from Master: op=Shutter serial=190723
10:32:50 Shutter LASER close
10:32:50 Received message from Camera: op=State serial=190725
10:32:50 GetSingleValue result=40  Value=cccccccc
10:32:50 SkyScan query
10:32:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:32:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:32:51 Parameters OK
10:32:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:32:51 Set A/D data flow result=40
10:32:51 Set A/D channel type result=40
10:32:51 Set A/D encoding result=40
10:32:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:32:51 Set channel filter=0.000000e+000  result=40
10:32:51 Config A/D  Result=40
10:32:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:32:51 Get A/D filter: -9.255963e+061  result=40
10:32:51 Get A/D value=-858993460  result=40
10:32:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:32:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:32:51 Parameters OK
10:32:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:32:51 Set A/D data flow result=40
10:32:51 Set A/D channel type result=40
10:32:51 Set A/D encoding result=40
10:32:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:32:51 Set channel filter=0.000000e+000  result=40
10:32:51 Config A/D  Result=40
10:32:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:32:51 Get A/D filter: -9.255963e+061  result=40
10:32:51 Get A/D value=-858993460  result=40
10:32:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:32:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:32:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:32:51 Aux=
10:32:51 Message to Camera, serial 190725 queued
10:33:28 Received message from Master: op=PointingHead serial=190738
10:33:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:33:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:33:28 Point started: ret=0
10:33:28 point_skyscan result=0
10:33:29 Check angles
10:33:29 SkyScan query
10:33:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:33:30 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:33:30 Message to Master queued w/err=0: serial=190738 error=0
10:33:35 Received message from Master: op=Filter serial=190739
10:33:35 Color wheel filter change from 0 to 0
10:33:35 FLIGetFilterPos err=0  currentPosition=0
10:33:35 FLIGetStepsRemaining err=0  RemainingSteps=0
10:33:35 Filter is already there-color wheel unchanged
10:33:35 Received message from Master: op=Shutter serial=190740
10:33:35 Shutter LASER close
10:33:35 Received message from Camera: op=State serial=190742
10:33:35 GetSingleValue result=40  Value=cccccccc
10:33:35 SkyScan query
10:33:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:33:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:33:35 Parameters OK
10:33:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:33:35 Set A/D data flow result=40
10:33:35 Set A/D channel type result=40
10:33:35 Set A/D encoding result=40
10:33:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:33:35 Set channel filter=0.000000e+000  result=40
10:33:35 Config A/D  Result=40
10:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:33:35 Get A/D filter: -9.255963e+061  result=40
10:33:35 Get A/D value=-858993460  result=40
10:33:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:33:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:33:35 Parameters OK
10:33:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:33:35 Set A/D data flow result=40
10:33:35 Set A/D channel type result=40
10:33:35 Set A/D encoding result=40
10:33:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:33:35 Set channel filter=0.000000e+000  result=40
10:33:35 Config A/D  Result=40
10:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:33:35 Get A/D filter: -9.255963e+061  result=40
10:33:35 Get A/D value=-858993460  result=40
10:33:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:33:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:33:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:33:35 Aux=
10:33:35 Message to Camera, serial 190742 queued
10:33:36 Received message from Master: op=Identify serial=190743
10:34:12 Received message from Master: op=PointingHead serial=190758
10:34:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:34:12 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:34:13 Point started: ret=0
10:34:13 point_skyscan result=0
10:34:13 Check angles
10:34:13 SkyScan query
10:34:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.49<-13566  Statuses=0008 0009
10:34:14 Msec=0  True Az=112.995  Ze=-23.49  Az status=0008  Ze status=0009
10:34:14 Check angles
10:34:14 SkyScan query
[UTC 2019-3-9  10:34:15]
10:34:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.895<-14993  Statuses=0008 0009
10:34:15 Msec=750  True Az=112.995  Ze=-44.895  Az status=0008  Ze status=0009
10:34:15 Check angles
10:34:15 SkyScan query
10:34:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.835<-16389  Statuses=0008 0009
10:34:15 Msec=1500  True Az=112.995  Ze=-65.835  Az status=0008  Ze status=0009
10:34:16 Check angles
10:34:16 SkyScan query
10:34:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
10:34:16 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
10:34:16 Check angles
10:34:16 SkyScan query
10:34:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.745<-19183  Statuses=0008 0009
10:34:17 Msec=3000  True Az=112.995  Ze=-107.745  Az status=0008  Ze status=0009
10:34:17 Check angles
10:34:17 SkyScan query
10:34:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
10:34:18 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
10:34:18 Check angles
10:34:18 SkyScan query
10:34:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.655<-21977  Statuses=0008 0009
10:34:18 Msec=4500  True Az=112.995  Ze=-149.655  Az status=0008  Ze status=0009
10:34:19 Check angles
10:34:19 SkyScan query
10:34:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.58<-23372  Statuses=0008 0009
10:34:19 Msec=5250  True Az=112.995  Ze=-170.58  Az status=0008  Ze status=0009
10:34:19 Check angles
10:34:19 SkyScan query
10:34:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:34:20 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:34:20 Message to Master queued w/err=0: serial=190758 error=0
10:34:25 Received message from Master: op=Filter serial=190759
10:34:25 Color wheel filter change from 0 to 0
10:34:25 FLIGetFilterPos err=0  currentPosition=0
10:34:25 FLIGetStepsRemaining err=0  RemainingSteps=0
10:34:25 Filter is already there-color wheel unchanged
10:34:25 Received message from Master: op=Shutter serial=190760
10:34:25 Shutter LASER open
10:34:25 Received message from Camera: op=State serial=190762
10:34:25 GetSingleValue result=40  Value=cccccccc
10:34:25 SkyScan query
10:34:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:34:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:34:26 Parameters OK
10:34:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:34:26 Set A/D data flow result=40
10:34:26 Set A/D channel type result=40
10:34:26 Set A/D encoding result=40
10:34:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:34:26 Set channel filter=0.000000e+000  result=40
10:34:26 Config A/D  Result=40
10:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:34:26 Get A/D filter: -9.255963e+061  result=40
10:34:26 Get A/D value=-858993460  result=40
10:34:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:34:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:34:26 Parameters OK
10:34:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:34:26 Set A/D data flow result=40
10:34:26 Set A/D channel type result=40
10:34:26 Set A/D encoding result=40
10:34:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:34:26 Set channel filter=0.000000e+000  result=40
10:34:26 Config A/D  Result=40
10:34:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:34:26 Get A/D filter: -9.255963e+061  result=40
10:34:26 Get A/D value=-858993460  result=40
10:34:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:34:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:34:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:34:26 Aux=
10:34:26 Message to Camera, serial 190762 queued
10:34:34 Received message from Master: op=Shutter serial=190772
10:34:34 Shutter LASER close
10:34:35 Received message from Master: op=PointingHead serial=190776
10:34:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:34:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:34:35 Point started: ret=0
10:34:35 point_skyscan result=0
10:34:36 Check angles
10:34:36 SkyScan query
10:34:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.445<-21563  Statuses=0008 0009
10:34:37 Msec=0  True Az=112.995  Ze=-143.445  Az status=0008  Ze status=0009
10:34:37 Check angles
10:34:37 SkyScan query
10:34:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.4<-20160  Statuses=0008 0009
10:34:37 Msec=750  True Az=112.995  Ze=-122.4  Az status=0008  Ze status=0009
10:34:37 Check angles
10:34:37 SkyScan query
10:34:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.535<-18769  Statuses=0008 0009
10:34:38 Msec=1500  True Az=112.995  Ze=-101.535  Az status=0008  Ze status=0009
10:34:38 Check angles
10:34:38 SkyScan query
10:34:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.55<-17370  Statuses=0008 0009
10:34:39 Msec=2250  True Az=112.995  Ze=-80.55  Az status=0008  Ze status=0009
10:34:39 Check angles
10:34:39 SkyScan query
10:34:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.61<-15974  Statuses=0008 0009
10:34:40 Msec=3000  True Az=112.995  Ze=-59.61  Az status=0008  Ze status=0009
10:34:40 Check angles
10:34:40 SkyScan query
10:34:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.655<-14577  Statuses=0008 0009
10:34:40 Msec=3750  True Az=112.995  Ze=-38.655  Az status=0008  Ze status=0009
10:34:40 Check angles
10:34:40 SkyScan query
10:34:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.7<-13180  Statuses=0008 0009
10:34:41 Msec=4500  True Az=112.995  Ze=-17.7  Az status=0008  Ze status=0009
10:34:41 Check angles
10:34:41 SkyScan query
10:34:42 SkyScan query done: ret=0  az=112.995<-7533  ze=3.255<-11783  Statuses=0008 0009
10:34:42 Msec=5250  True Az=112.995  Ze=3.255  Az status=0008  Ze status=0009
10:34:42 Check angles
10:34:42 SkyScan query
10:34:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:34:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:34:43 Message to Master queued w/err=0: serial=190776 error=0
10:34:48 Received message from Master: op=Filter serial=190777
10:34:48 Color wheel filter change from 0 to 0
10:34:48 FLIGetFilterPos err=0  currentPosition=0
10:34:48 FLIGetStepsRemaining err=0  RemainingSteps=0
10:34:48 Filter is already there-color wheel unchanged
10:34:48 Received message from Master: op=Shutter serial=190778
10:34:48 Shutter LASER close
10:34:48 Received message from Camera: op=State serial=190780
10:34:48 GetSingleValue result=40  Value=cccccccc
10:34:48 SkyScan query
10:34:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:34:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:34:48 Parameters OK
10:34:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:34:48 Set A/D data flow result=40
10:34:48 Set A/D channel type result=40
10:34:48 Set A/D encoding result=40
10:34:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:34:48 Set channel filter=0.000000e+000  result=40
10:34:48 Config A/D  Result=40
10:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:34:48 Get A/D filter: -9.255963e+061  result=40
10:34:48 Get A/D value=-858993460  result=40
10:34:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:34:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:34:48 Parameters OK
10:34:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:34:48 Set A/D data flow result=40
10:34:48 Set A/D channel type result=40
10:34:48 Set A/D encoding result=40
10:34:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:34:48 Set channel filter=0.000000e+000  result=40
10:34:48 Config A/D  Result=40
10:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:34:48 Get A/D filter: -9.255963e+061  result=40
10:34:48 Get A/D value=-858993460  result=40
10:34:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:34:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:34:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:34:48 Aux=
10:34:48 Message to Camera, serial 190780 queued
10:35:25 Received message from Master: op=PointingHead serial=190793
10:35:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:35:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:35:26 Point started: ret=0
10:35:26 point_skyscan result=0
10:35:26 Check angles
10:35:26 SkyScan query
10:35:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:35:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:35:27 Message to Master queued w/err=0: serial=190793 error=0
10:35:32 Received message from Master: op=Filter serial=190794
10:35:32 Color wheel filter change from 0 to 0
10:35:32 FLIGetFilterPos err=0  currentPosition=0
10:35:32 FLIGetStepsRemaining err=0  RemainingSteps=0
10:35:32 Filter is already there-color wheel unchanged
10:35:32 Received message from Master: op=Shutter serial=190795
10:35:32 Shutter LASER close
10:35:32 Received message from Camera: op=State serial=190797
10:35:32 GetSingleValue result=40  Value=cccccccc
10:35:32 SkyScan query
10:35:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:35:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:35:33 Parameters OK
10:35:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:35:33 Set A/D data flow result=40
10:35:33 Set A/D channel type result=40
10:35:33 Set A/D encoding result=40
10:35:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:35:33 Set channel filter=0.000000e+000  result=40
10:35:33 Config A/D  Result=40
10:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:35:33 Get A/D filter: -9.255963e+061  result=40
10:35:33 Get A/D value=-858993460  result=40
10:35:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:35:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:35:33 Parameters OK
10:35:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:35:33 Set A/D data flow result=40
10:35:33 Set A/D channel type result=40
10:35:33 Set A/D encoding result=40
10:35:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:35:33 Set channel filter=0.000000e+000  result=40
10:35:33 Config A/D  Result=40
10:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:35:33 Get A/D filter: -9.255963e+061  result=40
10:35:33 Get A/D value=-858993460  result=40
10:35:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:35:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:35:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:35:33 Aux=
10:35:33 Message to Camera, serial 190797 queued
10:36:10 Received message from Master: op=PointingHead serial=190810
10:36:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:36:10 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:36:10 Point started: ret=0
10:36:10 point_skyscan result=0
10:36:11 Check angles
10:36:11 SkyScan query
10:36:11 SkyScan query done: ret=0  az=135.93<-9062  ze=-6.51<-12434  Statuses=0009 0008
10:36:11 Msec=0  True Az=135.93  Ze=-6.51  Az status=0009  Ze status=0008
10:36:11 Check angles
10:36:11 SkyScan query
10:36:12 SkyScan query done: ret=0  az=153.72<-10248  ze=-6.495<-12433  Statuses=0009 0008
10:36:12 Msec=750  True Az=153.72  Ze=-6.495  Az status=0009  Ze status=0008
10:36:12 Check angles
10:36:12 SkyScan query
10:36:13 SkyScan query done: ret=0  az=171.51<-11434  ze=-6.495<-12433  Statuses=0009 0008
10:36:13 Msec=1500  True Az=171.51  Ze=-6.495  Az status=0009  Ze status=0008
10:36:13 Check angles
10:36:13 SkyScan query
10:36:14 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:36:14 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:36:14 Message to Master queued w/err=0: serial=190810 error=0
10:36:19 Received message from Master: op=Filter serial=190811
10:36:19 Color wheel filter change from 0 to 0
10:36:19 FLIGetFilterPos err=0  currentPosition=0
10:36:19 FLIGetStepsRemaining err=0  RemainingSteps=0
10:36:19 Filter is already there-color wheel unchanged
10:36:19 Received message from Master: op=Shutter serial=190812
10:36:19 Shutter LASER close
10:36:19 Received message from Camera: op=State serial=190814
10:36:19 GetSingleValue result=40  Value=cccccccc
10:36:19 SkyScan query
10:36:19 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:36:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:36:19 Parameters OK
10:36:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:36:19 Set A/D data flow result=40
10:36:19 Set A/D channel type result=40
10:36:19 Set A/D encoding result=40
10:36:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:36:19 Set channel filter=0.000000e+000  result=40
10:36:19 Config A/D  Result=40
10:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:36:19 Get A/D filter: -9.255963e+061  result=40
10:36:19 Get A/D value=-858993460  result=40
10:36:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:36:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:36:19 Parameters OK
10:36:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:36:19 Set A/D data flow result=40
10:36:19 Set A/D channel type result=40
10:36:19 Set A/D encoding result=40
10:36:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:36:19 Set channel filter=0.000000e+000  result=40
10:36:19 Config A/D  Result=40
10:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:36:19 Get A/D filter: -9.255963e+061  result=40
10:36:19 Get A/D value=-858993460  result=40
10:36:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:36:19 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:36:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:36:19 Aux=
10:36:19 Message to Camera, serial 190814 queued
10:36:56 Received message from Master: op=PointingHead serial=190827
10:36:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:36:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:36:56 Point started: ret=0
10:36:56 point_skyscan result=0
10:36:57 Check angles
10:36:57 SkyScan query
10:36:58 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
10:36:58 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
10:36:58 Check angles
10:36:58 SkyScan query
10:36:59 SkyScan query done: ret=0  az=135.36<-9024  ze=6.495<-11567  Statuses=0009 0008
10:36:59 Msec=750  True Az=135.36  Ze=6.495  Az status=0009  Ze status=0008
10:36:59 Check angles
10:36:59 SkyScan query
10:36:59 SkyScan query done: ret=0  az=117.615<-7841  ze=6.495<-11567  Statuses=0009 0008
10:36:59 Msec=1500  True Az=117.615  Ze=6.495  Az status=0009  Ze status=0008
10:37:00 Check angles
10:37:00 SkyScan query
10:37:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:37:00 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:37:00 Message to Master queued w/err=0: serial=190827 error=0
10:37:05 Received message from Master: op=Filter serial=190828
10:37:05 Color wheel filter change from 0 to 0
10:37:05 FLIGetFilterPos err=0  currentPosition=0
10:37:05 FLIGetStepsRemaining err=0  RemainingSteps=0
10:37:05 Filter is already there-color wheel unchanged
10:37:05 Received message from Master: op=Shutter serial=190829
10:37:05 Shutter LASER close
10:37:05 Received message from Camera: op=State serial=190831
10:37:05 GetSingleValue result=40  Value=cccccccc
10:37:05 SkyScan query
10:37:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:37:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:37:06 Parameters OK
10:37:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:37:06 Set A/D data flow result=40
10:37:06 Set A/D channel type result=40
10:37:06 Set A/D encoding result=40
10:37:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:37:06 Set channel filter=0.000000e+000  result=40
10:37:06 Config A/D  Result=40
10:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:37:06 Get A/D filter: -9.255963e+061  result=40
10:37:06 Get A/D value=-858993460  result=40
10:37:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:37:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:37:06 Parameters OK
10:37:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:37:06 Set A/D data flow result=40
10:37:06 Set A/D channel type result=40
10:37:06 Set A/D encoding result=40
10:37:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:37:06 Set channel filter=0.000000e+000  result=40
10:37:06 Config A/D  Result=40
10:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:37:06 Get A/D filter: -9.255963e+061  result=40
10:37:06 Get A/D value=-858993460  result=40
10:37:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:37:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:37:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:37:06 Aux=
10:37:06 Message to Camera, serial 190831 queued
10:37:43 Received message from Master: op=PointingHead serial=190844
10:37:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:37:43 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:37:43 Point started: ret=0
10:37:43 point_skyscan result=0
10:37:44 Check angles
10:37:44 SkyScan query
10:37:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.73<-13582  Statuses=0008 0009
10:37:45 Msec=0  True Az=112.995  Ze=-23.73  Az status=0008  Ze status=0009
10:37:45 Check angles
10:37:45 SkyScan query
10:37:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.165<-15011  Statuses=0008 0009
10:37:45 Msec=750  True Az=112.995  Ze=-45.165  Az status=0008  Ze status=0009
10:37:45 Check angles
10:37:45 SkyScan query
10:37:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.06<-16404  Statuses=0008 0009
10:37:46 Msec=1500  True Az=112.995  Ze=-66.06  Az status=0008  Ze status=0009
10:37:46 Check angles
10:37:46 SkyScan query
10:37:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.015<-17801  Statuses=0008 0009
10:37:47 Msec=2250  True Az=112.995  Ze=-87.015  Az status=0008  Ze status=0009
10:37:47 Check angles
10:37:47 SkyScan query
10:37:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.39<-19226  Statuses=0008 0009
10:37:48 Msec=3000  True Az=112.995  Ze=-108.39  Az status=0008  Ze status=0009
10:37:48 Check angles
10:37:48 SkyScan query
10:37:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.345<-20623  Statuses=0008 0009
10:37:48 Msec=3750  True Az=112.995  Ze=-129.345  Az status=0008  Ze status=0009
10:37:48 Check angles
10:37:48 SkyScan query
10:37:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.315<-22021  Statuses=0008 0009
10:37:49 Msec=4500  True Az=112.995  Ze=-150.315  Az status=0008  Ze status=0009
10:37:49 Check angles
10:37:49 SkyScan query
10:37:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.105<-23407  Statuses=0008 0009
10:37:50 Msec=5250  True Az=112.995  Ze=-171.105  Az status=0008  Ze status=0009
10:37:50 Check angles
10:37:50 SkyScan query
10:37:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:37:51 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:37:51 Message to Master queued w/err=0: serial=190844 error=0
10:37:56 Received message from Master: op=Filter serial=190845
10:37:56 Color wheel filter change from 0 to 0
10:37:56 FLIGetFilterPos err=0  currentPosition=0
10:37:56 FLIGetStepsRemaining err=0  RemainingSteps=0
10:37:56 Filter is already there-color wheel unchanged
10:37:56 Received message from Master: op=Shutter serial=190846
10:37:56 Shutter LASER open
10:37:56 Received message from Camera: op=State serial=190848
10:37:56 GetSingleValue result=40  Value=cccccccc
10:37:56 SkyScan query
10:37:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:37:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:37:56 Parameters OK
10:37:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:37:56 Set A/D data flow result=40
10:37:56 Set A/D channel type result=40
10:37:56 Set A/D encoding result=40
10:37:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:37:56 Set channel filter=0.000000e+000  result=40
10:37:56 Config A/D  Result=40
10:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:37:56 Get A/D filter: -9.255963e+061  result=40
10:37:56 Get A/D value=-858993460  result=40
10:37:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:37:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:37:56 Parameters OK
10:37:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:37:56 Set A/D data flow result=40
10:37:56 Set A/D channel type result=40
10:37:56 Set A/D encoding result=40
10:37:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:37:56 Set channel filter=0.000000e+000  result=40
10:37:56 Config A/D  Result=40
10:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:37:56 Get A/D filter: -9.255963e+061  result=40
10:37:56 Get A/D value=-858993460  result=40
10:37:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:37:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:37:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:37:56 Aux=
10:37:56 Message to Camera, serial 190848 queued
10:38:05 Received message from Master: op=Shutter serial=190858
10:38:05 Shutter LASER close
10:38:05 Received message from Master: op=PointingHead serial=190862
10:38:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:38:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:38:06 Point started: ret=0
10:38:06 point_skyscan result=0
10:38:06 Check angles
10:38:06 SkyScan query
10:38:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
10:38:07 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
10:38:07 Check angles
10:38:07 SkyScan query
10:38:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.59<-20106  Statuses=0008 0009
10:38:08 Msec=750  True Az=112.995  Ze=-121.59  Az status=0008  Ze status=0009
10:38:08 Check angles
10:38:08 SkyScan query
10:38:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.65<-18710  Statuses=0008 0009
10:38:09 Msec=1500  True Az=112.995  Ze=-100.65  Az status=0008  Ze status=0009
10:38:09 Check angles
10:38:09 SkyScan query
10:38:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.695<-17313  Statuses=0008 0009
10:38:09 Msec=2250  True Az=112.995  Ze=-79.695  Az status=0008  Ze status=0009
10:38:09 Check angles
10:38:09 SkyScan query
10:38:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.26<-15884  Statuses=0008 0009
10:38:10 Msec=3000  True Az=112.995  Ze=-58.26  Az status=0008  Ze status=0009
10:38:10 Check angles
10:38:10 SkyScan query
10:38:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.35<-14490  Statuses=0008 0009
10:38:11 Msec=3750  True Az=112.995  Ze=-37.35  Az status=0008  Ze status=0009
10:38:11 Check angles
10:38:11 SkyScan query
10:38:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.38<-13092  Statuses=0008 0009
10:38:12 Msec=4500  True Az=112.995  Ze=-16.38  Az status=0008  Ze status=0009
10:38:12 Check angles
10:38:12 SkyScan query
10:38:12 SkyScan query done: ret=0  az=112.995<-7533  ze=4.455<-11703  Statuses=0008 0009
10:38:12 Msec=5250  True Az=112.995  Ze=4.455  Az status=0008  Ze status=0009
10:38:12 Check angles
10:38:12 SkyScan query
10:38:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:38:13 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:38:13 Message to Master queued w/err=0: serial=190862 error=0
10:38:18 Received message from Master: op=Filter serial=190863
10:38:18 Color wheel filter change from 0 to 0
10:38:18 FLIGetFilterPos err=0  currentPosition=0
10:38:18 FLIGetStepsRemaining err=0  RemainingSteps=0
10:38:18 Filter is already there-color wheel unchanged
10:38:18 Received message from Master: op=Shutter serial=190864
10:38:18 Shutter LASER close
10:38:18 Received message from Camera: op=State serial=190866
10:38:18 GetSingleValue result=40  Value=cccccccc
10:38:18 SkyScan query
10:38:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:38:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:38:19 Parameters OK
10:38:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:38:19 Set A/D data flow result=40
10:38:19 Set A/D channel type result=40
10:38:19 Set A/D encoding result=40
10:38:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:38:19 Set channel filter=0.000000e+000  result=40
10:38:19 Config A/D  Result=40
10:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:38:19 Get A/D filter: -9.255963e+061  result=40
10:38:19 Get A/D value=-858993460  result=40
10:38:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:38:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:38:19 Parameters OK
10:38:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:38:19 Set A/D data flow result=40
10:38:19 Set A/D channel type result=40
10:38:19 Set A/D encoding result=40
10:38:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:38:19 Set channel filter=0.000000e+000  result=40
10:38:19 Config A/D  Result=40
10:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:38:19 Get A/D filter: -9.255963e+061  result=40
10:38:19 Get A/D value=-858993460  result=40
10:38:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:38:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:38:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:38:19 Aux=
10:38:19 Message to Camera, serial 190866 queued
10:38:56 Received message from Master: op=PointingHead serial=190879
10:38:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:38:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:38:56 Point started: ret=0
10:38:56 point_skyscan result=0
10:38:57 Check angles
10:38:57 SkyScan query
10:38:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:38:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:38:57 Message to Master queued w/err=0: serial=190879 error=0
10:39:02 Received message from Master: op=Filter serial=190880
10:39:02 Color wheel filter change from 0 to 0
10:39:02 FLIGetFilterPos err=0  currentPosition=0
10:39:02 FLIGetStepsRemaining err=0  RemainingSteps=0
10:39:02 Filter is already there-color wheel unchanged
10:39:03 Received message from Master: op=Shutter serial=190881
10:39:03 Shutter LASER close
10:39:03 Received message from Camera: op=State serial=190883
10:39:03 GetSingleValue result=40  Value=cccccccc
10:39:03 SkyScan query
10:39:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:39:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:39:03 Parameters OK
10:39:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:39:03 Set A/D data flow result=40
10:39:03 Set A/D channel type result=40
10:39:03 Set A/D encoding result=40
10:39:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:39:03 Set channel filter=0.000000e+000  result=40
10:39:03 Config A/D  Result=40
10:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:39:03 Get A/D filter: -9.255963e+061  result=40
10:39:03 Get A/D value=-858993460  result=40
10:39:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:39:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:39:03 Parameters OK
10:39:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:39:03 Set A/D data flow result=40
10:39:03 Set A/D channel type result=40
10:39:03 Set A/D encoding result=40
10:39:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:39:03 Set channel filter=0.000000e+000  result=40
10:39:03 Config A/D  Result=40
10:39:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:39:03 Get A/D filter: -9.255963e+061  result=40
10:39:03 Get A/D value=-858993460  result=40
10:39:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:39:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:39:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:39:03 Aux=
10:39:03 Message to Camera, serial 190883 queued
10:39:40 Received message from Master: op=PointingHead serial=190896
10:39:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:39:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:39:40 Point started: ret=0
10:39:40 point_skyscan result=0
10:39:41 Check angles
10:39:41 SkyScan query
10:39:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:39:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:39:42 Message to Master queued w/err=0: serial=190896 error=0
10:39:47 Received message from Master: op=Filter serial=190897
10:39:47 Color wheel filter change from 0 to 0
10:39:47 FLIGetFilterPos err=0  currentPosition=0
10:39:47 FLIGetStepsRemaining err=0  RemainingSteps=0
10:39:47 Filter is already there-color wheel unchanged
10:39:47 Received message from Master: op=Shutter serial=190898
10:39:47 Shutter LASER close
10:39:47 Received message from Camera: op=State serial=190900
10:39:47 GetSingleValue result=40  Value=cccccccc
10:39:47 SkyScan query
10:39:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:39:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:39:48 Parameters OK
10:39:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:39:48 Set A/D data flow result=40
10:39:48 Set A/D channel type result=40
10:39:48 Set A/D encoding result=40
10:39:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:39:48 Set channel filter=0.000000e+000  result=40
10:39:48 Config A/D  Result=40
10:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:39:48 Get A/D filter: -9.255963e+061  result=40
10:39:48 Get A/D value=-858993460  result=40
10:39:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:39:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:39:48 Parameters OK
10:39:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:39:48 Set A/D data flow result=40
10:39:48 Set A/D channel type result=40
10:39:48 Set A/D encoding result=40
10:39:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:39:48 Set channel filter=0.000000e+000  result=40
10:39:48 Config A/D  Result=40
10:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:39:48 Get A/D filter: -9.255963e+061  result=40
10:39:48 Get A/D value=-858993460  result=40
10:39:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:39:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:39:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:39:48 Aux=
10:39:48 Message to Camera, serial 190900 queued
10:40:24 Received message from Master: op=PointingHead serial=190913
10:40:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:40:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:40:25 Point started: ret=0
10:40:25 point_skyscan result=0
10:40:26 Check angles
10:40:26 SkyScan query
10:40:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:40:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:40:26 Message to Master queued w/err=0: serial=190913 error=0
10:40:31 Received message from Master: op=Filter serial=190914
10:40:31 Color wheel filter change from 0 to 0
10:40:31 FLIGetFilterPos err=0  currentPosition=0
10:40:31 FLIGetStepsRemaining err=0  RemainingSteps=0
10:40:31 Filter is already there-color wheel unchanged
10:40:31 Received message from Master: op=Shutter serial=190915
10:40:31 Shutter LASER close
10:40:31 Received message from Camera: op=State serial=190917
10:40:31 GetSingleValue result=40  Value=cccccccc
10:40:31 SkyScan query
10:40:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:40:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:40:32 Parameters OK
10:40:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:40:32 Set A/D data flow result=40
10:40:32 Set A/D channel type result=40
10:40:32 Set A/D encoding result=40
10:40:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:40:32 Set channel filter=0.000000e+000  result=40
10:40:32 Config A/D  Result=40
10:40:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:40:32 Get A/D filter: -9.255963e+061  result=40
10:40:32 Get A/D value=-858993460  result=40
10:40:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:40:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:40:32 Parameters OK
10:40:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:40:32 Set A/D data flow result=40
10:40:32 Set A/D channel type result=40
10:40:32 Set A/D encoding result=40
10:40:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:40:32 Set channel filter=0.000000e+000  result=40
10:40:32 Config A/D  Result=40
10:40:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:40:32 Get A/D filter: -9.255963e+061  result=40
10:40:32 Get A/D value=-858993460  result=40
10:40:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:40:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:40:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:40:32 Aux=
10:40:32 Message to Camera, serial 190917 queued
10:41:09 Received message from Master: op=PointingHead serial=190930
10:41:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:41:09 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:41:09 Point started: ret=0
10:41:09 point_skyscan result=0
10:41:10 Check angles
10:41:10 SkyScan query
10:41:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.295<-13553  Statuses=0008 0009
10:41:10 Msec=0  True Az=112.995  Ze=-23.295  Az status=0008  Ze status=0009
10:41:11 Check angles
10:41:11 SkyScan query
10:41:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.7<-14980  Statuses=0008 0009
10:41:11 Msec=750  True Az=112.995  Ze=-44.7  Az status=0008  Ze status=0009
10:41:11 Check angles
10:41:11 SkyScan query
10:41:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.655<-16377  Statuses=0008 0009
10:41:12 Msec=1500  True Az=112.995  Ze=-65.655  Az status=0008  Ze status=0009
10:41:12 Check angles
10:41:12 SkyScan query
10:41:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.61<-17774  Statuses=0008 0009
10:41:13 Msec=2250  True Az=112.995  Ze=-86.61  Az status=0008  Ze status=0009
10:41:13 Check angles
10:41:13 SkyScan query
10:41:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.985<-19199  Statuses=0008 0009
10:41:13 Msec=3000  True Az=112.995  Ze=-107.985  Az status=0008  Ze status=0009
10:41:14 Check angles
10:41:14 SkyScan query
10:41:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.94<-20596  Statuses=0008 0009
10:41:14 Msec=3750  True Az=112.995  Ze=-128.94  Az status=0008  Ze status=0009
10:41:14 Check angles
10:41:14 SkyScan query
10:41:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.895<-21993  Statuses=0008 0009
10:41:15 Msec=4500  True Az=112.995  Ze=-149.895  Az status=0008  Ze status=0009
10:41:15 Check angles
10:41:15 SkyScan query
10:41:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.775<-23385  Statuses=0008 0009
10:41:16 Msec=5250  True Az=112.995  Ze=-170.775  Az status=0008  Ze status=0009
10:41:16 Check angles
10:41:16 SkyScan query
10:41:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:41:16 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:41:16 Message to Master queued w/err=0: serial=190930 error=0
10:41:21 Received message from Master: op=Filter serial=190931
10:41:21 Color wheel filter change from 0 to 0
10:41:21 FLIGetFilterPos err=0  currentPosition=0
10:41:21 FLIGetStepsRemaining err=0  RemainingSteps=0
10:41:21 Filter is already there-color wheel unchanged
10:41:22 Received message from Master: op=Shutter serial=190932
10:41:22 Shutter LASER open
10:41:22 Received message from Camera: op=State serial=190934
10:41:22 GetSingleValue result=40  Value=cccccccc
10:41:22 SkyScan query
10:41:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:41:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:41:22 Parameters OK
10:41:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:41:22 Set A/D data flow result=40
10:41:22 Set A/D channel type result=40
10:41:22 Set A/D encoding result=40
10:41:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:41:22 Set channel filter=0.000000e+000  result=40
10:41:22 Config A/D  Result=40
10:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:41:22 Get A/D filter: -9.255963e+061  result=40
10:41:22 Get A/D value=-858993460  result=40
10:41:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:41:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:41:22 Parameters OK
10:41:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:41:22 Set A/D data flow result=40
10:41:22 Set A/D channel type result=40
10:41:22 Set A/D encoding result=40
10:41:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:41:22 Set channel filter=0.000000e+000  result=40
10:41:22 Config A/D  Result=40
10:41:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:41:22 Get A/D filter: -9.255963e+061  result=40
10:41:22 Get A/D value=-858993460  result=40
10:41:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:41:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:41:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:41:22 Aux=
10:41:22 Message to Camera, serial 190934 queued
10:41:31 Received message from Master: op=Shutter serial=190944
10:41:31 Shutter LASER close
10:41:31 Received message from Master: op=PointingHead serial=190948
10:41:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:41:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:41:32 Point started: ret=0
10:41:32 point_skyscan result=0
10:41:33 Check angles
10:41:33 SkyScan query
10:41:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.385<-21559  Statuses=0008 0009
10:41:33 Msec=0  True Az=112.995  Ze=-143.385  Az status=0008  Ze status=0009
10:41:33 Check angles
10:41:33 SkyScan query
10:41:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.965<-20131  Statuses=0008 0009
10:41:34 Msec=750  True Az=112.995  Ze=-121.965  Az status=0008  Ze status=0009
10:41:34 Check angles
10:41:34 SkyScan query
10:41:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.605<-18707  Statuses=0008 0009
10:41:35 Msec=1500  True Az=112.995  Ze=-100.605  Az status=0008  Ze status=0009
10:41:35 Check angles
10:41:35 SkyScan query
10:41:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.665<-17311  Statuses=0008 0009
10:41:35 Msec=2250  True Az=112.995  Ze=-79.665  Az status=0008  Ze status=0009
10:41:36 Check angles
10:41:36 SkyScan query
10:41:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.71<-15914  Statuses=0008 0009
10:41:36 Msec=3000  True Az=112.995  Ze=-58.71  Az status=0008  Ze status=0009
10:41:36 Check angles
10:41:36 SkyScan query
10:41:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.755<-14517  Statuses=0008 0009
10:41:37 Msec=3750  True Az=112.995  Ze=-37.755  Az status=0008  Ze status=0009
10:41:37 Check angles
10:41:37 SkyScan query
10:41:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.77<-13118  Statuses=0008 0009
10:41:38 Msec=4500  True Az=112.995  Ze=-16.77  Az status=0008  Ze status=0009
10:41:38 Check angles
10:41:38 SkyScan query
10:41:38 SkyScan query done: ret=0  az=112.995<-7533  ze=4.155<-11723  Statuses=0008 0009
10:41:38 Msec=5250  True Az=112.995  Ze=4.155  Az status=0008  Ze status=0009
10:41:39 Check angles
10:41:39 SkyScan query
10:41:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:41:39 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:41:39 Message to Master queued w/err=0: serial=190948 error=0
10:41:44 Received message from Master: op=Filter serial=190949
10:41:44 Color wheel filter change from 0 to 0
10:41:44 FLIGetFilterPos err=0  currentPosition=0
10:41:44 FLIGetStepsRemaining err=0  RemainingSteps=0
10:41:44 Filter is already there-color wheel unchanged
10:41:44 Received message from Master: op=Shutter serial=190950
10:41:44 Shutter LASER close
10:41:44 Received message from Camera: op=State serial=190952
10:41:44 GetSingleValue result=40  Value=cccccccc
10:41:44 SkyScan query
10:41:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:41:45 Parameters OK
10:41:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:41:45 Set A/D data flow result=40
10:41:45 Set A/D channel type result=40
10:41:45 Set A/D encoding result=40
10:41:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:41:45 Set channel filter=0.000000e+000  result=40
10:41:45 Config A/D  Result=40
10:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:41:45 Get A/D filter: -9.255963e+061  result=40
10:41:45 Get A/D value=-858993460  result=40
10:41:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:41:45 Parameters OK
10:41:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:41:45 Set A/D data flow result=40
10:41:45 Set A/D channel type result=40
10:41:45 Set A/D encoding result=40
10:41:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:41:45 Set channel filter=0.000000e+000  result=40
10:41:45 Config A/D  Result=40
10:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:41:45 Get A/D filter: -9.255963e+061  result=40
10:41:45 Get A/D value=-858993460  result=40
10:41:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:41:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:41:45 Aux=
10:41:45 Message to Camera, serial 190952 queued
10:42:21 Received message from Master: op=PointingHead serial=190964
10:42:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:42:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:42:21 Point started: ret=0
10:42:21 point_skyscan result=0
10:42:22 Check angles
10:42:22 SkyScan query
10:42:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:42:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:42:23 Message to Master queued w/err=0: serial=190964 error=0
10:42:28 Received message from Master: op=Filter serial=190965
10:42:28 Color wheel filter change from 0 to 0
10:42:28 FLIGetFilterPos err=0  currentPosition=0
10:42:28 FLIGetStepsRemaining err=0  RemainingSteps=0
10:42:28 Filter is already there-color wheel unchanged
10:42:28 Received message from Master: op=Shutter serial=190966
10:42:28 Shutter LASER close
10:42:28 Received message from Camera: op=State serial=190968
10:42:28 GetSingleValue result=40  Value=cccccccc
10:42:28 SkyScan query
10:42:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:42:28 Parameters OK
10:42:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:42:28 Set A/D data flow result=40
10:42:28 Set A/D channel type result=40
10:42:28 Set A/D encoding result=40
10:42:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:42:28 Set channel filter=0.000000e+000  result=40
10:42:28 Config A/D  Result=40
10:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:42:28 Get A/D filter: -9.255963e+061  result=40
10:42:28 Get A/D value=-858993460  result=40
10:42:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:42:28 Parameters OK
10:42:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:42:28 Set A/D data flow result=40
10:42:28 Set A/D channel type result=40
10:42:28 Set A/D encoding result=40
10:42:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:42:28 Set channel filter=0.000000e+000  result=40
10:42:28 Config A/D  Result=40
10:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:42:28 Get A/D filter: -9.255963e+061  result=40
10:42:28 Get A/D value=-858993460  result=40
10:42:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:42:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:42:28 Aux=
10:42:28 Message to Camera, serial 190968 queued
10:43:05 Received message from Master: op=PointingHead serial=190981
10:43:05 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:43:05 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:43:06 Point started: ret=0
10:43:06 point_skyscan result=0
10:43:06 Check angles
10:43:06 SkyScan query
10:43:07 SkyScan query done: ret=0  az=135.765<-9051  ze=-6.51<-12434  Statuses=0009 0008
10:43:07 Msec=0  True Az=135.765  Ze=-6.51  Az status=0009  Ze status=0008
10:43:07 Check angles
10:43:07 SkyScan query
10:43:08 SkyScan query done: ret=0  az=153.225<-10215  ze=-6.495<-12433  Statuses=0009 0008
10:43:08 Msec=750  True Az=153.225  Ze=-6.495  Az status=0009  Ze status=0008
10:43:08 Check angles
10:43:08 SkyScan query
10:43:08 SkyScan query done: ret=0  az=170.79<-11386  ze=-6.495<-12433  Statuses=0009 0008
10:43:08 Msec=1500  True Az=170.79  Ze=-6.495  Az status=0009  Ze status=0008
10:43:09 Check angles
10:43:09 SkyScan query
10:43:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:43:09 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:43:09 Message to Master queued w/err=0: serial=190981 error=0
10:43:14 Received message from Master: op=Filter serial=190982
10:43:14 Color wheel filter change from 0 to 0
10:43:14 FLIGetFilterPos err=0  currentPosition=0
10:43:14 FLIGetStepsRemaining err=0  RemainingSteps=0
10:43:14 Filter is already there-color wheel unchanged
10:43:14 Received message from Master: op=Shutter serial=190983
10:43:14 Shutter LASER close
10:43:14 Received message from Camera: op=State serial=190985
10:43:14 GetSingleValue result=40  Value=cccccccc
10:43:14 SkyScan query
10:43:15 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:43:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:43:15 Parameters OK
10:43:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:43:15 Set A/D data flow result=40
10:43:15 Set A/D channel type result=40
10:43:15 Set A/D encoding result=40
10:43:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:43:15 Set channel filter=0.000000e+000  result=40
10:43:15 Config A/D  Result=40
10:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:43:15 Get A/D filter: -9.255963e+061  result=40
10:43:15 Get A/D value=-858993460  result=40
10:43:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:43:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:43:15 Parameters OK
10:43:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:43:15 Set A/D data flow result=40
10:43:15 Set A/D channel type result=40
10:43:15 Set A/D encoding result=40
10:43:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:43:15 Set channel filter=0.000000e+000  result=40
10:43:15 Config A/D  Result=40
10:43:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:43:15 Get A/D filter: -9.255963e+061  result=40
10:43:15 Get A/D value=-858993460  result=40
10:43:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:43:15 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:43:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:43:15 Aux=
10:43:15 Message to Camera, serial 190985 queued
[UTC 2019-3-9  10:43:48]
10:43:52 Received message from Master: op=PointingHead serial=190998
10:43:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:43:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:43:52 Point started: ret=0
10:43:52 point_skyscan result=0
10:43:53 Check angles
10:43:53 SkyScan query
10:43:53 SkyScan query done: ret=0  az=153.21<-10214  ze=6.51<-11566  Statuses=0009 0008
10:43:53 Msec=0  True Az=153.21  Ze=6.51  Az status=0009  Ze status=0008
10:43:54 Check angles
10:43:54 SkyScan query
10:43:54 SkyScan query done: ret=0  az=135.765<-9051  ze=6.495<-11567  Statuses=0009 0008
10:43:54 Msec=750  True Az=135.765  Ze=6.495  Az status=0009  Ze status=0008
10:43:54 Check angles
10:43:54 SkyScan query
10:43:55 SkyScan query done: ret=0  az=117.93<-7862  ze=6.495<-11567  Statuses=0009 0008
10:43:55 Msec=1500  True Az=117.93  Ze=6.495  Az status=0009  Ze status=0008
10:43:55 Check angles
10:43:55 SkyScan query
10:43:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:43:56 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:43:56 Message to Master queued w/err=0: serial=190998 error=0
10:44:01 Received message from Master: op=Filter serial=190999
10:44:01 Color wheel filter change from 0 to 0
10:44:01 FLIGetFilterPos err=0  currentPosition=0
10:44:01 FLIGetStepsRemaining err=0  RemainingSteps=0
10:44:01 Filter is already there-color wheel unchanged
10:44:01 Received message from Master: op=Shutter serial=191000
10:44:01 Shutter LASER close
10:44:01 Received message from Camera: op=State serial=191002
10:44:01 GetSingleValue result=40  Value=cccccccc
10:44:01 SkyScan query
10:44:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:44:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:44:01 Parameters OK
10:44:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:44:01 Set A/D data flow result=40
10:44:01 Set A/D channel type result=40
10:44:01 Set A/D encoding result=40
10:44:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:44:01 Set channel filter=0.000000e+000  result=40
10:44:01 Config A/D  Result=40
10:44:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:44:01 Get A/D filter: -9.255963e+061  result=40
10:44:01 Get A/D value=-858993460  result=40
10:44:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:44:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:44:01 Parameters OK
10:44:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:44:01 Set A/D data flow result=40
10:44:01 Set A/D channel type result=40
10:44:01 Set A/D encoding result=40
10:44:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:44:01 Set channel filter=0.000000e+000  result=40
10:44:01 Config A/D  Result=40
10:44:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:44:01 Get A/D filter: -9.255963e+061  result=40
10:44:01 Get A/D value=-858993460  result=40
10:44:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:44:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:44:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:44:01 Aux=
10:44:01 Message to Camera, serial 191002 queued
10:44:38 Received message from Master: op=PointingHead serial=191015
10:44:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:44:38 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:44:39 Point started: ret=0
10:44:39 point_skyscan result=0
10:44:39 Check angles
10:44:39 SkyScan query
10:44:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.685<-13579  Statuses=0008 0009
10:44:40 Msec=0  True Az=112.995  Ze=-23.685  Az status=0008  Ze status=0009
10:44:40 Check angles
10:44:40 SkyScan query
10:44:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.64<-14976  Statuses=0008 0009
10:44:41 Msec=750  True Az=112.995  Ze=-44.64  Az status=0008  Ze status=0009
10:44:41 Check angles
10:44:41 SkyScan query
10:44:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-66<-16400  Statuses=0008 0009
10:44:42 Msec=1500  True Az=112.995  Ze=-66  Az status=0008  Ze status=0009
10:44:42 Check angles
10:44:42 SkyScan query
10:44:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.955<-17797  Statuses=0008 0009
10:44:42 Msec=2250  True Az=112.995  Ze=-86.955  Az status=0008  Ze status=0009
10:44:42 Check angles
10:44:42 SkyScan query
10:44:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.895<-19193  Statuses=0008 0009
10:44:43 Msec=3000  True Az=112.995  Ze=-107.895  Az status=0008  Ze status=0009
10:44:43 Check angles
10:44:43 SkyScan query
10:44:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.285<-20619  Statuses=0008 0009
10:44:44 Msec=3750  True Az=112.995  Ze=-129.285  Az status=0008  Ze status=0009
10:44:44 Check angles
10:44:44 SkyScan query
10:44:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.225<-22015  Statuses=0008 0009
10:44:45 Msec=4500  True Az=112.995  Ze=-150.225  Az status=0008  Ze status=0009
10:44:45 Check angles
10:44:45 SkyScan query
10:44:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.045<-23403  Statuses=0008 0009
10:44:45 Msec=5250  True Az=112.995  Ze=-171.045  Az status=0008  Ze status=0009
10:44:45 Check angles
10:44:45 SkyScan query
10:44:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:44:46 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:44:46 Message to Master queued w/err=0: serial=191015 error=0
10:44:51 Received message from Master: op=Filter serial=191016
10:44:51 Color wheel filter change from 0 to 0
10:44:51 FLIGetFilterPos err=0  currentPosition=0
10:44:51 FLIGetStepsRemaining err=0  RemainingSteps=0
10:44:51 Filter is already there-color wheel unchanged
10:44:51 Received message from Master: op=Shutter serial=191017
10:44:51 Shutter LASER open
10:44:51 Received message from Camera: op=State serial=191019
10:44:51 GetSingleValue result=40  Value=cccccccc
10:44:51 SkyScan query
10:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:44:52 Parameters OK
10:44:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:44:52 Set A/D data flow result=40
10:44:52 Set A/D channel type result=40
10:44:52 Set A/D encoding result=40
10:44:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:44:52 Set channel filter=0.000000e+000  result=40
10:44:52 Config A/D  Result=40
10:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:44:52 Get A/D filter: -9.255963e+061  result=40
10:44:52 Get A/D value=-858993460  result=40
10:44:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:44:52 Parameters OK
10:44:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:44:52 Set A/D data flow result=40
10:44:52 Set A/D channel type result=40
10:44:52 Set A/D encoding result=40
10:44:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:44:52 Set channel filter=0.000000e+000  result=40
10:44:52 Config A/D  Result=40
10:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:44:52 Get A/D filter: -9.255963e+061  result=40
10:44:52 Get A/D value=-858993460  result=40
10:44:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:44:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:44:52 Aux=
10:44:52 Message to Camera, serial 191019 queued
10:45:00 Received message from Master: op=Shutter serial=191029
10:45:00 Shutter LASER close
10:45:01 Received message from Master: op=PointingHead serial=191033
10:45:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:45:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:45:01 Point started: ret=0
10:45:01 point_skyscan result=0
10:45:02 Check angles
10:45:02 SkyScan query
10:45:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.965<-21531  Statuses=0008 0009
10:45:03 Msec=0  True Az=112.995  Ze=-142.965  Az status=0008  Ze status=0009
10:45:03 Check angles
10:45:03 SkyScan query
10:45:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.905<-20127  Statuses=0008 0009
10:45:03 Msec=750  True Az=112.995  Ze=-121.905  Az status=0008  Ze status=0009
10:45:03 Check angles
10:45:03 SkyScan query
10:45:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.07<-18738  Statuses=0008 0009
10:45:04 Msec=1500  True Az=112.995  Ze=-101.07  Az status=0008  Ze status=0009
10:45:04 Check angles
10:45:04 SkyScan query
10:45:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
10:45:05 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
10:45:05 Check angles
10:45:05 SkyScan query
10:45:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.175<-15945  Statuses=0008 0009
10:45:06 Msec=3000  True Az=112.995  Ze=-59.175  Az status=0008  Ze status=0009
10:45:06 Check angles
10:45:06 SkyScan query
10:45:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.19<-14546  Statuses=0008 0009
10:45:06 Msec=3750  True Az=112.995  Ze=-38.19  Az status=0008  Ze status=0009
10:45:06 Check angles
10:45:06 SkyScan query
10:45:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.25<-13150  Statuses=0008 0009
10:45:07 Msec=4500  True Az=112.995  Ze=-17.25  Az status=0008  Ze status=0009
10:45:07 Check angles
10:45:07 SkyScan query
10:45:08 SkyScan query done: ret=0  az=112.995<-7533  ze=4.125<-11725  Statuses=0008 0009
10:45:08 Msec=5250  True Az=112.995  Ze=4.125  Az status=0008  Ze status=0009
10:45:08 Check angles
10:45:08 SkyScan query
10:45:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:45:09 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:45:09 Message to Master queued w/err=0: serial=191033 error=0
10:45:14 Received message from Master: op=Filter serial=191034
10:45:14 Color wheel filter change from 0 to 0
10:45:14 FLIGetFilterPos err=0  currentPosition=0
10:45:14 FLIGetStepsRemaining err=0  RemainingSteps=0
10:45:14 Filter is already there-color wheel unchanged
10:45:14 Received message from Master: op=Shutter serial=191035
10:45:14 Shutter LASER close
10:45:14 Received message from Camera: op=State serial=191037
10:45:14 GetSingleValue result=40  Value=cccccccc
10:45:14 SkyScan query
10:45:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:45:14 Parameters OK
10:45:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:45:14 Set A/D data flow result=40
10:45:14 Set A/D channel type result=40
10:45:14 Set A/D encoding result=40
10:45:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:45:14 Set channel filter=0.000000e+000  result=40
10:45:14 Config A/D  Result=40
10:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:45:14 Get A/D filter: -9.255963e+061  result=40
10:45:14 Get A/D value=-858993460  result=40
10:45:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:45:14 Parameters OK
10:45:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:45:14 Set A/D data flow result=40
10:45:14 Set A/D channel type result=40
10:45:14 Set A/D encoding result=40
10:45:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:45:14 Set channel filter=0.000000e+000  result=40
10:45:14 Config A/D  Result=40
10:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:45:14 Get A/D filter: -9.255963e+061  result=40
10:45:14 Get A/D value=-858993460  result=40
10:45:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:45:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:45:14 Aux=
10:45:14 Message to Camera, serial 191037 queued
10:45:51 Received message from Master: op=PointingHead serial=191050
10:45:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:45:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:45:52 Point started: ret=0
10:45:52 point_skyscan result=0
10:45:52 Check angles
10:45:52 SkyScan query
10:45:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:45:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:45:53 Message to Master queued w/err=0: serial=191050 error=0
10:45:58 Received message from Master: op=Filter serial=191051
10:45:58 Color wheel filter change from 0 to 0
10:45:58 FLIGetFilterPos err=0  currentPosition=0
10:45:58 FLIGetStepsRemaining err=0  RemainingSteps=0
10:45:58 Filter is already there-color wheel unchanged
10:45:58 Received message from Master: op=Shutter serial=191052
10:45:58 Shutter LASER close
10:45:58 Received message from Camera: op=State serial=191054
10:45:58 GetSingleValue result=40  Value=cccccccc
10:45:58 SkyScan query
10:45:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:45:59 Parameters OK
10:45:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:45:59 Set A/D data flow result=40
10:45:59 Set A/D channel type result=40
10:45:59 Set A/D encoding result=40
10:45:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:45:59 Set channel filter=0.000000e+000  result=40
10:45:59 Config A/D  Result=40
10:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:45:59 Get A/D filter: -9.255963e+061  result=40
10:45:59 Get A/D value=-858993460  result=40
10:45:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:45:59 Parameters OK
10:45:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:45:59 Set A/D data flow result=40
10:45:59 Set A/D channel type result=40
10:45:59 Set A/D encoding result=40
10:45:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:45:59 Set channel filter=0.000000e+000  result=40
10:45:59 Config A/D  Result=40
10:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:45:59 Get A/D filter: -9.255963e+061  result=40
10:45:59 Get A/D value=-858993460  result=40
10:45:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:45:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:45:59 Aux=
10:45:59 Message to Camera, serial 191054 queued
10:46:36 Received message from Master: op=PointingHead serial=191067
10:46:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:46:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:46:36 Point started: ret=0
10:46:36 point_skyscan result=0
10:46:37 Check angles
10:46:37 SkyScan query
10:46:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:46:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:46:37 Message to Master queued w/err=0: serial=191067 error=0
10:46:42 Received message from Master: op=Filter serial=191068
10:46:42 Color wheel filter change from 0 to 0
10:46:42 FLIGetFilterPos err=0  currentPosition=0
10:46:42 FLIGetStepsRemaining err=0  RemainingSteps=0
10:46:42 Filter is already there-color wheel unchanged
10:46:42 Received message from Master: op=Shutter serial=191069
10:46:42 Shutter LASER close
10:46:43 Received message from Camera: op=State serial=191071
10:46:43 GetSingleValue result=40  Value=cccccccc
10:46:43 SkyScan query
10:46:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:46:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:46:43 Parameters OK
10:46:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:46:43 Set A/D data flow result=40
10:46:43 Set A/D channel type result=40
10:46:43 Set A/D encoding result=40
10:46:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:46:43 Set channel filter=0.000000e+000  result=40
10:46:43 Config A/D  Result=40
10:46:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:46:43 Get A/D filter: -9.255963e+061  result=40
10:46:43 Get A/D value=-858993460  result=40
10:46:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:46:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:46:43 Parameters OK
10:46:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:46:43 Set A/D data flow result=40
10:46:43 Set A/D channel type result=40
10:46:43 Set A/D encoding result=40
10:46:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:46:43 Set channel filter=0.000000e+000  result=40
10:46:43 Config A/D  Result=40
10:46:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:46:43 Get A/D filter: -9.255963e+061  result=40
10:46:43 Get A/D value=-858993460  result=40
10:46:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:46:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:46:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:46:43 Aux=
10:46:43 Message to Camera, serial 191071 queued
10:47:20 Received message from Master: op=PointingHead serial=191084
10:47:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:47:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:47:20 Point started: ret=0
10:47:20 point_skyscan result=0
10:47:21 Check angles
10:47:21 SkyScan query
10:47:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:47:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:47:22 Message to Master queued w/err=0: serial=191084 error=0
10:47:27 Received message from Master: op=Filter serial=191085
10:47:27 Color wheel filter change from 0 to 0
10:47:27 FLIGetFilterPos err=0  currentPosition=0
10:47:27 FLIGetStepsRemaining err=0  RemainingSteps=0
10:47:27 Filter is already there-color wheel unchanged
10:47:27 Received message from Master: op=Shutter serial=191086
10:47:27 Shutter LASER close
10:47:27 Received message from Camera: op=State serial=191088
10:47:27 GetSingleValue result=40  Value=cccccccc
10:47:27 SkyScan query
10:47:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:47:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:47:27 Parameters OK
10:47:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:47:27 Set A/D data flow result=40
10:47:27 Set A/D channel type result=40
10:47:27 Set A/D encoding result=40
10:47:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:47:27 Set channel filter=0.000000e+000  result=40
10:47:27 Config A/D  Result=40
10:47:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:47:27 Get A/D filter: -9.255963e+061  result=40
10:47:27 Get A/D value=-858993460  result=40
10:47:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:47:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:47:27 Parameters OK
10:47:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:47:27 Set A/D data flow result=40
10:47:27 Set A/D channel type result=40
10:47:27 Set A/D encoding result=40
10:47:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:47:27 Set channel filter=0.000000e+000  result=40
10:47:27 Config A/D  Result=40
10:47:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:47:27 Get A/D filter: -9.255963e+061  result=40
10:47:27 Get A/D value=-858993460  result=40
10:47:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:47:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:47:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:47:27 Aux=
10:47:27 Message to Camera, serial 191088 queued
10:48:04 Received message from Master: op=PointingHead serial=191101
10:48:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:48:04 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:48:05 Point started: ret=0
10:48:05 point_skyscan result=0
10:48:05 Check angles
10:48:05 SkyScan query
10:48:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
10:48:06 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
10:48:06 Check angles
10:48:06 SkyScan query
10:48:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
10:48:07 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
10:48:07 Check angles
10:48:07 SkyScan query
10:48:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.835<-16389  Statuses=0008 0009
10:48:07 Msec=1500  True Az=112.995  Ze=-65.835  Az status=0008  Ze status=0009
10:48:08 Check angles
10:48:08 SkyScan query
10:48:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.775<-17785  Statuses=0008 0009
10:48:08 Msec=2250  True Az=112.995  Ze=-86.775  Az status=0008  Ze status=0009
10:48:08 Check angles
10:48:08 SkyScan query
10:48:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.745<-19183  Statuses=0008 0009
10:48:09 Msec=3000  True Az=112.995  Ze=-107.745  Az status=0008  Ze status=0009
10:48:09 Check angles
10:48:09 SkyScan query
10:48:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.67<-20578  Statuses=0008 0009
10:48:10 Msec=3750  True Az=112.995  Ze=-128.67  Az status=0008  Ze status=0009
10:48:10 Check angles
10:48:10 SkyScan query
10:48:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.64<-21976  Statuses=0008 0009
10:48:10 Msec=4500  True Az=112.995  Ze=-149.64  Az status=0008  Ze status=0009
10:48:11 Check angles
10:48:11 SkyScan query
10:48:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.925<-23395  Statuses=0008 0009
10:48:11 Msec=5250  True Az=112.995  Ze=-170.925  Az status=0008  Ze status=0009
10:48:11 Check angles
10:48:11 SkyScan query
10:48:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:48:12 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:48:12 Message to Master queued w/err=0: serial=191101 error=0
10:48:17 Received message from Master: op=Filter serial=191102
10:48:17 Color wheel filter change from 0 to 0
10:48:17 FLIGetFilterPos err=0  currentPosition=0
10:48:17 FLIGetStepsRemaining err=0  RemainingSteps=0
10:48:17 Filter is already there-color wheel unchanged
10:48:17 Received message from Master: op=Shutter serial=191103
10:48:17 Shutter LASER open
10:48:17 Received message from Camera: op=State serial=191105
10:48:17 GetSingleValue result=40  Value=cccccccc
10:48:17 SkyScan query
10:48:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:48:18 Parameters OK
10:48:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:48:18 Set A/D data flow result=40
10:48:18 Set A/D channel type result=40
10:48:18 Set A/D encoding result=40
10:48:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:48:18 Set channel filter=0.000000e+000  result=40
10:48:18 Config A/D  Result=40
10:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:48:18 Get A/D filter: -9.255963e+061  result=40
10:48:18 Get A/D value=-858993460  result=40
10:48:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:48:18 Parameters OK
10:48:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:48:18 Set A/D data flow result=40
10:48:18 Set A/D channel type result=40
10:48:18 Set A/D encoding result=40
10:48:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:48:18 Set channel filter=0.000000e+000  result=40
10:48:18 Config A/D  Result=40
10:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:48:18 Get A/D filter: -9.255963e+061  result=40
10:48:18 Get A/D value=-858993460  result=40
10:48:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:48:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:48:18 Aux=
10:48:18 Message to Camera, serial 191105 queued
10:48:26 Received message from Master: op=Shutter serial=191115
10:48:26 Shutter LASER close
10:48:27 Received message from Master: op=PointingHead serial=191119
10:48:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:48:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:48:27 Point started: ret=0
10:48:27 point_skyscan result=0
10:48:28 Check angles
10:48:28 SkyScan query
10:48:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
10:48:29 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
10:48:29 Check angles
10:48:29 SkyScan query
10:48:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
10:48:29 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
10:48:30 Check angles
10:48:30 SkyScan query
10:48:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.845<-18723  Statuses=0008 0009
10:48:30 Msec=1500  True Az=112.995  Ze=-100.845  Az status=0008  Ze status=0009
10:48:30 Check angles
10:48:30 SkyScan query
10:48:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
10:48:31 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
10:48:31 Check angles
10:48:31 SkyScan query
10:48:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
10:48:32 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
10:48:32 Check angles
10:48:32 SkyScan query
10:48:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
10:48:32 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
10:48:33 Check angles
10:48:33 SkyScan query
10:48:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
10:48:33 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
10:48:33 Check angles
10:48:33 SkyScan query
10:48:34 SkyScan query done: ret=0  az=112.995<-7533  ze=4.305<-11713  Statuses=0008 0009
10:48:34 Msec=5250  True Az=112.995  Ze=4.305  Az status=0008  Ze status=0009
10:48:34 Check angles
10:48:34 SkyScan query
10:48:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:48:35 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:48:35 Message to Master queued w/err=0: serial=191119 error=0
10:48:40 Received message from Master: op=Filter serial=191120
10:48:40 Color wheel filter change from 0 to 0
10:48:40 FLIGetFilterPos err=0  currentPosition=0
10:48:40 FLIGetStepsRemaining err=0  RemainingSteps=0
10:48:40 Filter is already there-color wheel unchanged
10:48:40 Received message from Master: op=Shutter serial=191121
10:48:40 Shutter LASER close
10:48:40 Received message from Camera: op=State serial=191123
10:48:40 GetSingleValue result=40  Value=cccccccc
10:48:40 SkyScan query
10:48:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:48:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:48:41 Parameters OK
10:48:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:48:41 Set A/D data flow result=40
10:48:41 Set A/D channel type result=40
10:48:41 Set A/D encoding result=40
10:48:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:48:41 Set channel filter=0.000000e+000  result=40
10:48:41 Config A/D  Result=40
10:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:48:41 Get A/D filter: -9.255963e+061  result=40
10:48:41 Get A/D value=-858993460  result=40
10:48:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:48:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:48:41 Parameters OK
10:48:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:48:41 Set A/D data flow result=40
10:48:41 Set A/D channel type result=40
10:48:41 Set A/D encoding result=40
10:48:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:48:41 Set channel filter=0.000000e+000  result=40
10:48:41 Config A/D  Result=40
10:48:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:48:41 Get A/D filter: -9.255963e+061  result=40
10:48:41 Get A/D value=-858993460  result=40
10:48:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:48:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:48:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:48:41 Aux=
10:48:41 Message to Camera, serial 191123 queued
10:49:17 Received message from Master: op=PointingHead serial=191136
10:49:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:49:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:49:18 Point started: ret=0
10:49:18 point_skyscan result=0
10:49:19 Check angles
10:49:19 SkyScan query
10:49:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:49:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:49:19 Message to Master queued w/err=0: serial=191136 error=0
10:49:24 Received message from Master: op=Filter serial=191137
10:49:24 Color wheel filter change from 0 to 0
10:49:24 FLIGetFilterPos err=0  currentPosition=0
10:49:24 FLIGetStepsRemaining err=0  RemainingSteps=0
10:49:24 Filter is already there-color wheel unchanged
10:49:24 Received message from Master: op=Shutter serial=191138
10:49:24 Shutter LASER close
10:49:24 Received message from Camera: op=State serial=191140
10:49:24 GetSingleValue result=40  Value=cccccccc
10:49:24 SkyScan query
10:49:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:49:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:49:25 Parameters OK
10:49:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:49:25 Set A/D data flow result=40
10:49:25 Set A/D channel type result=40
10:49:25 Set A/D encoding result=40
10:49:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:49:25 Set channel filter=0.000000e+000  result=40
10:49:25 Config A/D  Result=40
10:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:49:25 Get A/D filter: -9.255963e+061  result=40
10:49:25 Get A/D value=-858993460  result=40
10:49:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:49:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:49:25 Parameters OK
10:49:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:49:25 Set A/D data flow result=40
10:49:25 Set A/D channel type result=40
10:49:25 Set A/D encoding result=40
10:49:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:49:25 Set channel filter=0.000000e+000  result=40
10:49:25 Config A/D  Result=40
10:49:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:49:25 Get A/D filter: -9.255963e+061  result=40
10:49:25 Get A/D value=-858993460  result=40
10:49:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:49:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:49:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:49:25 Aux=
10:49:25 Message to Camera, serial 191140 queued
10:50:02 Received message from Master: op=PointingHead serial=191153
10:50:02 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:50:02 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:50:02 Point started: ret=0
10:50:02 point_skyscan result=0
10:50:03 Check angles
10:50:03 SkyScan query
10:50:03 SkyScan query done: ret=0  az=136.455<-9097  ze=-6.51<-12434  Statuses=0009 0008
10:50:03 Msec=0  True Az=136.455  Ze=-6.51  Az status=0009  Ze status=0008
10:50:04 Check angles
10:50:04 SkyScan query
10:50:04 SkyScan query done: ret=0  az=153.915<-10261  ze=-6.495<-12433  Statuses=0009 0008
10:50:04 Msec=750  True Az=153.915  Ze=-6.495  Az status=0009  Ze status=0008
10:50:04 Check angles
10:50:04 SkyScan query
10:50:05 SkyScan query done: ret=0  az=171.315<-11421  ze=-6.495<-12433  Statuses=0009 0008
10:50:05 Msec=1500  True Az=171.315  Ze=-6.495  Az status=0009  Ze status=0008
10:50:05 Check angles
10:50:05 SkyScan query
10:50:06 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:50:06 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:50:06 Message to Master queued w/err=0: serial=191153 error=0
10:50:11 Received message from Master: op=Filter serial=191154
10:50:11 Color wheel filter change from 0 to 0
10:50:11 FLIGetFilterPos err=0  currentPosition=0
10:50:11 FLIGetStepsRemaining err=0  RemainingSteps=0
10:50:11 Filter is already there-color wheel unchanged
10:50:11 Received message from Master: op=Shutter serial=191155
10:50:11 Shutter LASER close
10:50:11 Received message from Camera: op=State serial=191157
10:50:11 GetSingleValue result=40  Value=cccccccc
10:50:11 SkyScan query
10:50:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:50:11 Parameters OK
10:50:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:50:11 Set A/D data flow result=40
10:50:11 Set A/D channel type result=40
10:50:11 Set A/D encoding result=40
10:50:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:50:11 Set channel filter=0.000000e+000  result=40
10:50:11 Config A/D  Result=40
10:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:50:11 Get A/D filter: -9.255963e+061  result=40
10:50:11 Get A/D value=-858993460  result=40
10:50:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:50:11 Parameters OK
10:50:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:50:11 Set A/D data flow result=40
10:50:11 Set A/D channel type result=40
10:50:11 Set A/D encoding result=40
10:50:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:50:11 Set channel filter=0.000000e+000  result=40
10:50:11 Config A/D  Result=40
10:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:50:11 Get A/D filter: -9.255963e+061  result=40
10:50:11 Get A/D value=-858993460  result=40
10:50:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:50:11 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:50:11 Aux=
10:50:11 Message to Camera, serial 191157 queued
10:50:48 Received message from Master: op=PointingHead serial=191170
10:50:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:50:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:50:49 Point started: ret=0
10:50:49 point_skyscan result=0
10:50:49 Check angles
10:50:49 SkyScan query
10:50:50 SkyScan query done: ret=0  az=153.075<-10205  ze=6.51<-11566  Statuses=0009 0008
10:50:50 Msec=0  True Az=153.075  Ze=6.51  Az status=0009  Ze status=0008
10:50:50 Check angles
10:50:50 SkyScan query
10:50:51 SkyScan query done: ret=0  az=135.615<-9041  ze=6.495<-11567  Statuses=0009 0008
10:50:51 Msec=750  True Az=135.615  Ze=6.495  Az status=0009  Ze status=0008
10:50:51 Check angles
10:50:51 SkyScan query
10:50:51 SkyScan query done: ret=0  az=118.11<-7874  ze=6.495<-11567  Statuses=0009 0008
10:50:51 Msec=1500  True Az=118.11  Ze=6.495  Az status=0009  Ze status=0008
10:50:52 Check angles
10:50:52 SkyScan query
10:50:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:50:52 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:50:52 Message to Master queued w/err=0: serial=191170 error=0
10:50:57 Received message from Master: op=Filter serial=191171
10:50:57 Color wheel filter change from 0 to 0
10:50:57 FLIGetFilterPos err=0  currentPosition=0
10:50:57 FLIGetStepsRemaining err=0  RemainingSteps=0
10:50:57 Filter is already there-color wheel unchanged
10:50:57 Received message from Master: op=Shutter serial=191172
10:50:57 Shutter LASER close
10:50:57 Received message from Camera: op=State serial=191174
10:50:57 GetSingleValue result=40  Value=cccccccc
10:50:57 SkyScan query
10:50:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:50:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:50:58 Parameters OK
10:50:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:50:58 Set A/D data flow result=40
10:50:58 Set A/D channel type result=40
10:50:58 Set A/D encoding result=40
10:50:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:50:58 Set channel filter=0.000000e+000  result=40
10:50:58 Config A/D  Result=40
10:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:50:58 Get A/D filter: -9.255963e+061  result=40
10:50:58 Get A/D value=-858993460  result=40
10:50:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:50:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:50:58 Parameters OK
10:50:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:50:58 Set A/D data flow result=40
10:50:58 Set A/D channel type result=40
10:50:58 Set A/D encoding result=40
10:50:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:50:58 Set channel filter=0.000000e+000  result=40
10:50:58 Config A/D  Result=40
10:50:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:50:58 Get A/D filter: -9.255963e+061  result=40
10:50:58 Get A/D value=-858993460  result=40
10:50:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:50:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:50:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:50:58 Aux=
10:50:58 Message to Camera, serial 191174 queued
10:51:34 Received message from Master: op=PointingHead serial=191186
10:51:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:51:34 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:51:34 Point started: ret=0
10:51:34 point_skyscan result=0
10:51:35 Check angles
10:51:35 SkyScan query
10:51:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-22.995<-13533  Statuses=0008 0009
10:51:36 Msec=0  True Az=112.995  Ze=-22.995  Az status=0008  Ze status=0009
10:51:36 Check angles
10:51:36 SkyScan query
10:51:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.965<-14931  Statuses=0008 0009
10:51:36 Msec=750  True Az=112.995  Ze=-43.965  Az status=0008  Ze status=0009
10:51:37 Check angles
10:51:37 SkyScan query
10:51:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.355<-16357  Statuses=0008 0009
10:51:37 Msec=1500  True Az=112.995  Ze=-65.355  Az status=0008  Ze status=0009
10:51:37 Check angles
10:51:37 SkyScan query
10:51:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
10:51:38 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
10:51:38 Check angles
10:51:38 SkyScan query
10:51:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.685<-19179  Statuses=0008 0009
10:51:39 Msec=3000  True Az=112.995  Ze=-107.685  Az status=0008  Ze status=0009
10:51:39 Check angles
10:51:39 SkyScan query
10:51:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.625<-20575  Statuses=0008 0009
10:51:39 Msec=3750  True Az=112.995  Ze=-128.625  Az status=0008  Ze status=0009
10:51:40 Check angles
10:51:40 SkyScan query
10:51:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.595<-21973  Statuses=0008 0009
10:51:40 Msec=4500  True Az=112.995  Ze=-149.595  Az status=0008  Ze status=0009
10:51:40 Check angles
10:51:40 SkyScan query
10:51:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.52<-23368  Statuses=0008 0009
10:51:41 Msec=5250  True Az=112.995  Ze=-170.52  Az status=0008  Ze status=0009
10:51:41 Check angles
10:51:41 SkyScan query
10:51:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:51:42 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:51:42 Message to Master queued w/err=0: serial=191186 error=0
10:51:47 Received message from Master: op=Filter serial=191187
10:51:47 Color wheel filter change from 0 to 0
10:51:47 FLIGetFilterPos err=0  currentPosition=0
10:51:47 FLIGetStepsRemaining err=0  RemainingSteps=0
10:51:47 Filter is already there-color wheel unchanged
10:51:47 Received message from Master: op=Shutter serial=191188
10:51:47 Shutter LASER open
10:51:47 Received message from Camera: op=State serial=191190
10:51:47 GetSingleValue result=40  Value=cccccccc
10:51:47 SkyScan query
10:51:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:51:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:51:48 Parameters OK
10:51:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:51:48 Set A/D data flow result=40
10:51:48 Set A/D channel type result=40
10:51:48 Set A/D encoding result=40
10:51:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:51:48 Set channel filter=0.000000e+000  result=40
10:51:48 Config A/D  Result=40
10:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:51:48 Get A/D filter: -9.255963e+061  result=40
10:51:48 Get A/D value=-858993460  result=40
10:51:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:51:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:51:48 Parameters OK
10:51:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:51:48 Set A/D data flow result=40
10:51:48 Set A/D channel type result=40
10:51:48 Set A/D encoding result=40
10:51:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:51:48 Set channel filter=0.000000e+000  result=40
10:51:48 Config A/D  Result=40
10:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:51:48 Get A/D filter: -9.255963e+061  result=40
10:51:48 Get A/D value=-858993460  result=40
10:51:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:51:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:51:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:51:48 Aux=
10:51:48 Message to Camera, serial 191190 queued
10:51:56 Received message from Master: op=Shutter serial=191200
10:51:56 Shutter LASER close
10:51:56 Received message from Master: op=PointingHead serial=191204
10:51:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:51:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:51:57 Point started: ret=0
10:51:57 point_skyscan result=0
10:51:57 Check angles
10:51:57 SkyScan query
10:51:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
10:51:58 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
10:51:58 Check angles
10:51:58 SkyScan query
10:51:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
10:51:59 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
10:51:59 Check angles
10:51:59 SkyScan query
10:52:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
10:52:00 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
10:52:00 Check angles
10:52:00 SkyScan query
10:52:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.365<-17291  Statuses=0008 0009
10:52:00 Msec=2250  True Az=112.995  Ze=-79.365  Az status=0008  Ze status=0009
10:52:01 Check angles
10:52:01 SkyScan query
10:52:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.41<-15894  Statuses=0008 0009
10:52:01 Msec=3000  True Az=112.995  Ze=-58.41  Az status=0008  Ze status=0009
10:52:01 Check angles
10:52:01 SkyScan query
10:52:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.485<-14499  Statuses=0008 0009
10:52:02 Msec=3750  True Az=112.995  Ze=-37.485  Az status=0008  Ze status=0009
10:52:02 Check angles
10:52:02 SkyScan query
10:52:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.5<-13100  Statuses=0008 0009
10:52:03 Msec=4500  True Az=112.995  Ze=-16.5  Az status=0008  Ze status=0009
10:52:03 Check angles
10:52:03 SkyScan query
10:52:03 SkyScan query done: ret=0  az=112.995<-7533  ze=4.365<-11709  Statuses=0008 0009
10:52:03 Msec=5250  True Az=112.995  Ze=4.365  Az status=0008  Ze status=0009
10:52:04 Check angles
10:52:04 SkyScan query
10:52:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:52:04 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:52:04 Message to Master queued w/err=0: serial=191204 error=0
10:52:09 Received message from Master: op=Filter serial=191205
10:52:09 Color wheel filter change from 0 to 0
10:52:09 FLIGetFilterPos err=0  currentPosition=0
10:52:09 FLIGetStepsRemaining err=0  RemainingSteps=0
10:52:09 Filter is already there-color wheel unchanged
10:52:09 Received message from Master: op=Shutter serial=191206
10:52:09 Shutter LASER close
10:52:09 Received message from Camera: op=State serial=191208
10:52:09 GetSingleValue result=40  Value=cccccccc
10:52:09 SkyScan query
10:52:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:52:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:52:10 Parameters OK
10:52:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:52:10 Set A/D data flow result=40
10:52:10 Set A/D channel type result=40
10:52:10 Set A/D encoding result=40
10:52:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:52:10 Set channel filter=0.000000e+000  result=40
10:52:10 Config A/D  Result=40
10:52:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:52:10 Get A/D filter: -9.255963e+061  result=40
10:52:10 Get A/D value=-858993460  result=40
10:52:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:52:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:52:10 Parameters OK
10:52:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:52:10 Set A/D data flow result=40
10:52:10 Set A/D channel type result=40
10:52:10 Set A/D encoding result=40
10:52:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:52:10 Set channel filter=0.000000e+000  result=40
10:52:10 Config A/D  Result=40
10:52:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:52:10 Get A/D filter: -9.255963e+061  result=40
10:52:10 Get A/D value=-858993460  result=40
10:52:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:52:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:52:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:52:10 Aux=
10:52:10 Message to Camera, serial 191208 queued
10:52:47 Received message from Master: op=PointingHead serial=191221
10:52:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:52:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:52:47 Point started: ret=0
10:52:47 point_skyscan result=0
10:52:48 Check angles
10:52:48 SkyScan query
10:52:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:52:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:52:49 Message to Master queued w/err=0: serial=191221 error=0
10:52:54 Received message from Master: op=Filter serial=191222
10:52:54 Color wheel filter change from 0 to 0
10:52:54 FLIGetFilterPos err=0  currentPosition=0
10:52:54 FLIGetStepsRemaining err=0  RemainingSteps=0
10:52:54 Filter is already there-color wheel unchanged
10:52:54 Received message from Master: op=Shutter serial=191223
10:52:54 Shutter LASER close
10:52:54 Received message from Camera: op=State serial=191225
10:52:54 GetSingleValue result=40  Value=cccccccc
10:52:54 SkyScan query
10:52:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:52:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:52:54 Parameters OK
10:52:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:52:54 Set A/D data flow result=40
10:52:54 Set A/D channel type result=40
10:52:54 Set A/D encoding result=40
10:52:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:52:54 Set channel filter=0.000000e+000  result=40
10:52:54 Config A/D  Result=40
10:52:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:52:54 Get A/D filter: -9.255963e+061  result=40
10:52:54 Get A/D value=-858993460  result=40
10:52:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:52:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:52:54 Parameters OK
10:52:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:52:54 Set A/D data flow result=40
10:52:54 Set A/D channel type result=40
10:52:54 Set A/D encoding result=40
10:52:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:52:54 Set channel filter=0.000000e+000  result=40
10:52:54 Config A/D  Result=40
10:52:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:52:54 Get A/D filter: -9.255963e+061  result=40
10:52:54 Get A/D value=-858993460  result=40
10:52:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:52:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:52:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:52:54 Aux=
10:52:54 Message to Camera, serial 191225 queued
10:53:31 Received message from Master: op=PointingHead serial=191238
10:53:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:53:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:53:32 Point started: ret=0
10:53:32 point_skyscan result=0
10:53:32 Check angles
10:53:32 SkyScan query
10:53:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:53:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:53:33 Message to Master queued w/err=0: serial=191238 error=0
10:53:38 Received message from Master: op=Filter serial=191239
10:53:38 Color wheel filter change from 0 to 0
10:53:38 FLIGetFilterPos err=0  currentPosition=0
10:53:38 FLIGetStepsRemaining err=0  RemainingSteps=0
10:53:38 Filter is already there-color wheel unchanged
10:53:38 Received message from Master: op=Shutter serial=191240
10:53:38 Shutter LASER close
10:53:38 Received message from Camera: op=State serial=191242
10:53:38 GetSingleValue result=40  Value=cccccccc
10:53:38 SkyScan query
10:53:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:53:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:53:39 Parameters OK
10:53:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:53:39 Set A/D data flow result=40
10:53:39 Set A/D channel type result=40
10:53:39 Set A/D encoding result=40
10:53:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:53:39 Set channel filter=0.000000e+000  result=40
10:53:39 Config A/D  Result=40
10:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:53:39 Get A/D filter: -9.255963e+061  result=40
10:53:39 Get A/D value=-858993460  result=40
10:53:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:53:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:53:39 Parameters OK
10:53:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:53:39 Set A/D data flow result=40
10:53:39 Set A/D channel type result=40
10:53:39 Set A/D encoding result=40
10:53:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:53:39 Set channel filter=0.000000e+000  result=40
10:53:39 Config A/D  Result=40
10:53:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:53:39 Get A/D filter: -9.255963e+061  result=40
10:53:39 Get A/D value=-858993460  result=40
10:53:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:53:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:53:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:53:39 Aux=
10:53:39 Message to Camera, serial 191242 queued
[UTC 2019-3-9  10:54:15]
10:54:15 Received message from Master: op=PointingHead serial=191255
10:54:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:54:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:54:16 Point started: ret=0
10:54:16 point_skyscan result=0
10:54:17 Check angles
10:54:17 SkyScan query
10:54:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:54:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:54:17 Message to Master queued w/err=0: serial=191255 error=0
10:54:22 Received message from Master: op=Filter serial=191256
10:54:22 Color wheel filter change from 0 to 0
10:54:22 FLIGetFilterPos err=0  currentPosition=0
10:54:22 FLIGetStepsRemaining err=0  RemainingSteps=0
10:54:22 Filter is already there-color wheel unchanged
10:54:22 Received message from Master: op=Shutter serial=191257
10:54:22 Shutter LASER close
10:54:22 Received message from Camera: op=State serial=191259
10:54:22 GetSingleValue result=40  Value=cccccccc
10:54:22 SkyScan query
10:54:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:54:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:54:23 Parameters OK
10:54:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:54:23 Set A/D data flow result=40
10:54:23 Set A/D channel type result=40
10:54:23 Set A/D encoding result=40
10:54:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:54:23 Set channel filter=0.000000e+000  result=40
10:54:23 Config A/D  Result=40
10:54:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:54:23 Get A/D filter: -9.255963e+061  result=40
10:54:23 Get A/D value=-858993460  result=40
10:54:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:54:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:54:23 Parameters OK
10:54:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:54:23 Set A/D data flow result=40
10:54:23 Set A/D channel type result=40
10:54:23 Set A/D encoding result=40
10:54:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:54:23 Set channel filter=0.000000e+000  result=40
10:54:23 Config A/D  Result=40
10:54:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:54:23 Get A/D filter: -9.255963e+061  result=40
10:54:23 Get A/D value=-858993460  result=40
10:54:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:54:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:54:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:54:23 Aux=
10:54:23 Message to Camera, serial 191259 queued
10:55:00 Received message from Master: op=PointingHead serial=191272
10:55:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:55:00 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:55:00 Point started: ret=0
10:55:00 point_skyscan result=0
10:55:01 Check angles
10:55:01 SkyScan query
10:55:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
10:55:02 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
10:55:02 Check angles
10:55:02 SkyScan query
10:55:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
10:55:02 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
10:55:02 Check angles
10:55:02 SkyScan query
10:55:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.265<-16351  Statuses=0008 0009
10:55:03 Msec=1500  True Az=112.995  Ze=-65.265  Az status=0008  Ze status=0009
10:55:03 Check angles
10:55:03 SkyScan query
10:55:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.22<-17748  Statuses=0008 0009
10:55:04 Msec=2250  True Az=112.995  Ze=-86.22  Az status=0008  Ze status=0009
10:55:04 Check angles
10:55:04 SkyScan query
10:55:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.175<-19145  Statuses=0008 0009
10:55:05 Msec=3000  True Az=112.995  Ze=-107.175  Az status=0008  Ze status=0009
10:55:05 Check angles
10:55:05 SkyScan query
10:55:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.115<-20541  Statuses=0008 0009
10:55:05 Msec=3750  True Az=112.995  Ze=-128.115  Az status=0008  Ze status=0009
10:55:05 Check angles
10:55:05 SkyScan query
10:55:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.085<-21939  Statuses=0008 0009
10:55:06 Msec=4500  True Az=112.995  Ze=-149.085  Az status=0008  Ze status=0009
10:55:06 Check angles
10:55:06 SkyScan query
10:55:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.025<-23335  Statuses=0008 0009
10:55:07 Msec=5250  True Az=112.995  Ze=-170.025  Az status=0008  Ze status=0009
10:55:07 Check angles
10:55:07 SkyScan query
10:55:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:55:08 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:55:08 Message to Master queued w/err=0: serial=191272 error=0
10:55:13 Received message from Master: op=Filter serial=191273
10:55:13 Color wheel filter change from 0 to 0
10:55:13 FLIGetFilterPos err=0  currentPosition=0
10:55:13 FLIGetStepsRemaining err=0  RemainingSteps=0
10:55:13 Filter is already there-color wheel unchanged
10:55:13 Received message from Master: op=Shutter serial=191274
10:55:13 Shutter LASER open
10:55:13 Received message from Camera: op=State serial=191276
10:55:13 GetSingleValue result=40  Value=cccccccc
10:55:13 SkyScan query
10:55:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:55:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:55:13 Parameters OK
10:55:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:55:13 Set A/D data flow result=40
10:55:13 Set A/D channel type result=40
10:55:13 Set A/D encoding result=40
10:55:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:55:13 Set channel filter=0.000000e+000  result=40
10:55:13 Config A/D  Result=40
10:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:55:13 Get A/D filter: -9.255963e+061  result=40
10:55:13 Get A/D value=-858993460  result=40
10:55:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:55:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:55:13 Parameters OK
10:55:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:55:13 Set A/D data flow result=40
10:55:13 Set A/D channel type result=40
10:55:13 Set A/D encoding result=40
10:55:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:55:13 Set channel filter=0.000000e+000  result=40
10:55:13 Config A/D  Result=40
10:55:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:55:13 Get A/D filter: -9.255963e+061  result=40
10:55:13 Get A/D value=-858993460  result=40
10:55:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:55:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:55:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:55:13 Aux=
10:55:13 Message to Camera, serial 191276 queued
10:55:22 Received message from Master: op=Shutter serial=191286
10:55:22 Shutter LASER close
10:55:23 Received message from Master: op=PointingHead serial=191290
10:55:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:55:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:55:23 Point started: ret=0
10:55:23 point_skyscan result=0
10:55:24 Check angles
10:55:24 SkyScan query
10:55:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.025<-21535  Statuses=0008 0009
10:55:24 Msec=0  True Az=112.995  Ze=-143.025  Az status=0008  Ze status=0009
10:55:24 Check angles
10:55:24 SkyScan query
10:55:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
10:55:25 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
10:55:25 Check angles
10:55:25 SkyScan query
10:55:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.265<-18751  Statuses=0008 0009
10:55:26 Msec=1500  True Az=112.995  Ze=-101.265  Az status=0008  Ze status=0009
10:55:26 Check angles
10:55:26 SkyScan query
10:55:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.89<-17326  Statuses=0008 0009
10:55:27 Msec=2250  True Az=112.995  Ze=-79.89  Az status=0008  Ze status=0009
10:55:27 Check angles
10:55:27 SkyScan query
10:55:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.92<-15928  Statuses=0008 0009
10:55:27 Msec=3000  True Az=112.995  Ze=-58.92  Az status=0008  Ze status=0009
10:55:27 Check angles
10:55:27 SkyScan query
10:55:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.965<-14531  Statuses=0008 0009
10:55:28 Msec=3750  True Az=112.995  Ze=-37.965  Az status=0008  Ze status=0009
10:55:28 Check angles
10:55:28 SkyScan query
10:55:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.995<-13133  Statuses=0008 0009
10:55:29 Msec=4500  True Az=112.995  Ze=-16.995  Az status=0008  Ze status=0009
10:55:29 Check angles
10:55:29 SkyScan query
10:55:30 SkyScan query done: ret=0  az=112.995<-7533  ze=4.335<-11711  Statuses=0008 0009
10:55:30 Msec=5250  True Az=112.995  Ze=4.335  Az status=0008  Ze status=0009
10:55:30 Check angles
10:55:30 SkyScan query
10:55:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:55:30 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:55:30 Message to Master queued w/err=0: serial=191290 error=0
10:55:35 Received message from Master: op=Filter serial=191291
10:55:35 Color wheel filter change from 0 to 0
10:55:35 FLIGetFilterPos err=0  currentPosition=0
10:55:35 FLIGetStepsRemaining err=0  RemainingSteps=0
10:55:35 Filter is already there-color wheel unchanged
10:55:35 Received message from Master: op=Shutter serial=191292
10:55:35 Shutter LASER close
10:55:36 Received message from Camera: op=State serial=191294
10:55:36 GetSingleValue result=40  Value=cccccccc
10:55:36 SkyScan query
10:55:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:55:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:55:36 Parameters OK
10:55:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:55:36 Set A/D data flow result=40
10:55:36 Set A/D channel type result=40
10:55:36 Set A/D encoding result=40
10:55:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:55:36 Set channel filter=0.000000e+000  result=40
10:55:36 Config A/D  Result=40
10:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:55:36 Get A/D filter: -9.255963e+061  result=40
10:55:36 Get A/D value=-858993460  result=40
10:55:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:55:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:55:36 Parameters OK
10:55:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:55:36 Set A/D data flow result=40
10:55:36 Set A/D channel type result=40
10:55:36 Set A/D encoding result=40
10:55:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:55:36 Set channel filter=0.000000e+000  result=40
10:55:36 Config A/D  Result=40
10:55:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:55:36 Get A/D filter: -9.255963e+061  result=40
10:55:36 Get A/D value=-858993460  result=40
10:55:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:55:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:55:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:55:36 Aux=
10:55:36 Message to Camera, serial 191294 queued
10:56:13 Received message from Master: op=PointingHead serial=191307
10:56:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:56:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:56:13 Point started: ret=0
10:56:13 point_skyscan result=0
10:56:14 Check angles
10:56:14 SkyScan query
10:56:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:56:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:56:15 Message to Master queued w/err=0: serial=191307 error=0
10:56:20 Received message from Master: op=Filter serial=191308
10:56:20 Color wheel filter change from 0 to 0
10:56:20 FLIGetFilterPos err=0  currentPosition=0
10:56:20 FLIGetStepsRemaining err=0  RemainingSteps=0
10:56:20 Filter is already there-color wheel unchanged
10:56:20 Received message from Master: op=Shutter serial=191309
10:56:20 Shutter LASER close
10:56:20 Received message from Camera: op=State serial=191311
10:56:20 GetSingleValue result=40  Value=cccccccc
10:56:20 SkyScan query
10:56:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:56:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:56:20 Parameters OK
10:56:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:56:20 Set A/D data flow result=40
10:56:20 Set A/D channel type result=40
10:56:20 Set A/D encoding result=40
10:56:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:56:20 Set channel filter=0.000000e+000  result=40
10:56:20 Config A/D  Result=40
10:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:56:20 Get A/D filter: -9.255963e+061  result=40
10:56:20 Get A/D value=-858993460  result=40
10:56:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:56:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:56:20 Parameters OK
10:56:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:56:20 Set A/D data flow result=40
10:56:20 Set A/D channel type result=40
10:56:20 Set A/D encoding result=40
10:56:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:56:20 Set channel filter=0.000000e+000  result=40
10:56:20 Config A/D  Result=40
10:56:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:56:20 Get A/D filter: -9.255963e+061  result=40
10:56:20 Get A/D value=-858993460  result=40
10:56:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:56:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:56:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:56:20 Aux=
10:56:20 Message to Camera, serial 191311 queued
10:56:57 Received message from Master: op=PointingHead serial=191324
10:56:57 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
10:56:57 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
10:56:58 Point started: ret=0
10:56:58 point_skyscan result=0
10:56:58 Check angles
10:56:58 SkyScan query
10:56:59 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
10:56:59 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
10:56:59 Check angles
10:56:59 SkyScan query
10:57:00 SkyScan query done: ret=0  az=153.555<-10237  ze=-6.495<-12433  Statuses=0009 0008
10:57:00 Msec=750  True Az=153.555  Ze=-6.495  Az status=0009  Ze status=0008
10:57:00 Check angles
10:57:00 SkyScan query
10:57:01 SkyScan query done: ret=0  az=171.12<-11408  ze=-6.495<-12433  Statuses=0009 0008
10:57:01 Msec=1500  True Az=171.12  Ze=-6.495  Az status=0009  Ze status=0008
10:57:01 Check angles
10:57:01 SkyScan query
10:57:01 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:57:01 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
10:57:01 Message to Master queued w/err=0: serial=191324 error=0
10:57:06 Received message from Master: op=Filter serial=191325
10:57:06 Color wheel filter change from 0 to 0
10:57:06 FLIGetFilterPos err=0  currentPosition=0
10:57:06 FLIGetStepsRemaining err=0  RemainingSteps=0
10:57:06 Filter is already there-color wheel unchanged
10:57:06 Received message from Master: op=Shutter serial=191326
10:57:06 Shutter LASER close
10:57:06 Received message from Camera: op=State serial=191328
10:57:06 GetSingleValue result=40  Value=cccccccc
10:57:06 SkyScan query
10:57:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
10:57:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:57:07 Parameters OK
10:57:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:57:07 Set A/D data flow result=40
10:57:07 Set A/D channel type result=40
10:57:07 Set A/D encoding result=40
10:57:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:57:07 Set channel filter=0.000000e+000  result=40
10:57:07 Config A/D  Result=40
10:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:57:07 Get A/D filter: -9.255963e+061  result=40
10:57:07 Get A/D value=-858993460  result=40
10:57:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:57:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:57:07 Parameters OK
10:57:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:57:07 Set A/D data flow result=40
10:57:07 Set A/D channel type result=40
10:57:07 Set A/D encoding result=40
10:57:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:57:07 Set channel filter=0.000000e+000  result=40
10:57:07 Config A/D  Result=40
10:57:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:57:07 Get A/D filter: -9.255963e+061  result=40
10:57:07 Get A/D value=-858993460  result=40
10:57:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:57:07 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:57:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:57:07 Aux=
10:57:07 Message to Camera, serial 191328 queued
10:57:44 Received message from Master: op=PointingHead serial=191341
10:57:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:57:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:57:44 Point started: ret=0
10:57:44 point_skyscan result=0
10:57:45 Check angles
10:57:45 SkyScan query
10:57:46 SkyScan query done: ret=0  az=152.55<-10170  ze=6.51<-11566  Statuses=0009 0008
10:57:46 Msec=0  True Az=152.55  Ze=6.51  Az status=0009  Ze status=0008
10:57:46 Check angles
10:57:46 SkyScan query
10:57:46 SkyScan query done: ret=0  az=135.09<-9006  ze=6.495<-11567  Statuses=0009 0008
10:57:46 Msec=750  True Az=135.09  Ze=6.495  Az status=0009  Ze status=0008
10:57:47 Check angles
10:57:47 SkyScan query
10:57:47 SkyScan query done: ret=0  az=117.63<-7842  ze=6.495<-11567  Statuses=0009 0008
10:57:47 Msec=1500  True Az=117.63  Ze=6.495  Az status=0009  Ze status=0008
10:57:47 Check angles
10:57:47 SkyScan query
10:57:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:57:48 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:57:48 Message to Master queued w/err=0: serial=191341 error=0
10:57:53 Received message from Master: op=Filter serial=191342
10:57:53 Color wheel filter change from 0 to 0
10:57:53 FLIGetFilterPos err=0  currentPosition=0
10:57:53 FLIGetStepsRemaining err=0  RemainingSteps=0
10:57:53 Filter is already there-color wheel unchanged
10:57:53 Received message from Master: op=Shutter serial=191343
10:57:53 Shutter LASER close
10:57:53 Received message from Camera: op=State serial=191345
10:57:53 GetSingleValue result=40  Value=cccccccc
10:57:53 SkyScan query
10:57:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:57:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:57:54 Parameters OK
10:57:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:57:54 Set A/D data flow result=40
10:57:54 Set A/D channel type result=40
10:57:54 Set A/D encoding result=40
10:57:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:57:54 Set channel filter=0.000000e+000  result=40
10:57:54 Config A/D  Result=40
10:57:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:57:54 Get A/D filter: -9.255963e+061  result=40
10:57:54 Get A/D value=-858993460  result=40
10:57:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:57:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:57:54 Parameters OK
10:57:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:57:54 Set A/D data flow result=40
10:57:54 Set A/D channel type result=40
10:57:54 Set A/D encoding result=40
10:57:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:57:54 Set channel filter=0.000000e+000  result=40
10:57:54 Config A/D  Result=40
10:57:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:57:54 Get A/D filter: -9.255963e+061  result=40
10:57:54 Get A/D value=-858993460  result=40
10:57:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:57:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:57:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:57:54 Aux=
10:57:54 Message to Camera, serial 191345 queued
10:58:31 Received message from Master: op=PointingHead serial=191358
10:58:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
10:58:31 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
10:58:31 Point started: ret=0
10:58:31 point_skyscan result=0
10:58:32 Check angles
10:58:32 SkyScan query
10:58:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.49<-13566  Statuses=0008 0009
10:58:32 Msec=0  True Az=112.995  Ze=-23.49  Az status=0008  Ze status=0009
10:58:32 Check angles
10:58:32 SkyScan query
10:58:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.4<-14960  Statuses=0008 0009
10:58:33 Msec=750  True Az=112.995  Ze=-44.4  Az status=0008  Ze status=0009
10:58:33 Check angles
10:58:33 SkyScan query
10:58:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.34<-16356  Statuses=0008 0009
10:58:34 Msec=1500  True Az=112.995  Ze=-65.34  Az status=0008  Ze status=0009
10:58:34 Check angles
10:58:34 SkyScan query
10:58:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.295<-17753  Statuses=0008 0009
10:58:35 Msec=2250  True Az=112.995  Ze=-86.295  Az status=0008  Ze status=0009
10:58:35 Check angles
10:58:35 SkyScan query
10:58:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.265<-19151  Statuses=0008 0009
10:58:35 Msec=3000  True Az=112.995  Ze=-107.265  Az status=0008  Ze status=0009
10:58:35 Check angles
10:58:35 SkyScan query
10:58:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.205<-20547  Statuses=0008 0009
10:58:36 Msec=3750  True Az=112.995  Ze=-128.205  Az status=0008  Ze status=0009
10:58:36 Check angles
10:58:36 SkyScan query
10:58:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.175<-21945  Statuses=0008 0009
10:58:37 Msec=4500  True Az=112.995  Ze=-149.175  Az status=0008  Ze status=0009
10:58:37 Check angles
10:58:37 SkyScan query
10:58:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.1<-23340  Statuses=0008 0009
10:58:38 Msec=5250  True Az=112.995  Ze=-170.1  Az status=0008  Ze status=0009
10:58:38 Check angles
10:58:38 SkyScan query
10:58:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
10:58:38 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
10:58:38 Message to Master queued w/err=0: serial=191358 error=0
10:58:43 Received message from Master: op=Filter serial=191359
10:58:43 Color wheel filter change from 0 to 0
10:58:43 FLIGetFilterPos err=0  currentPosition=0
10:58:43 FLIGetStepsRemaining err=0  RemainingSteps=0
10:58:43 Filter is already there-color wheel unchanged
10:58:43 Received message from Master: op=Shutter serial=191360
10:58:43 Shutter LASER open
10:58:44 Received message from Camera: op=State serial=191362
10:58:44 GetSingleValue result=40  Value=cccccccc
10:58:44 SkyScan query
10:58:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
10:58:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:58:44 Parameters OK
10:58:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:58:44 Set A/D data flow result=40
10:58:44 Set A/D channel type result=40
10:58:44 Set A/D encoding result=40
10:58:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:58:44 Set channel filter=0.000000e+000  result=40
10:58:44 Config A/D  Result=40
10:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:58:44 Get A/D filter: -9.255963e+061  result=40
10:58:44 Get A/D value=-858993460  result=40
10:58:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:58:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:58:44 Parameters OK
10:58:44 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:58:44 Set A/D data flow result=40
10:58:44 Set A/D channel type result=40
10:58:44 Set A/D encoding result=40
10:58:44 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:58:44 Set channel filter=0.000000e+000  result=40
10:58:44 Config A/D  Result=40
10:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:58:44 Get A/D filter: -9.255963e+061  result=40
10:58:44 Get A/D value=-858993460  result=40
10:58:44 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:58:44 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:58:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:58:44 Aux=
10:58:44 Message to Camera, serial 191362 queued
10:58:53 Received message from Master: op=Shutter serial=191372
10:58:53 Shutter LASER close
10:58:53 Received message from Master: op=PointingHead serial=191376
10:58:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:58:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:58:53 Point started: ret=0
10:58:53 point_skyscan result=0
10:58:54 Check angles
10:58:54 SkyScan query
10:58:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
10:58:55 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
10:58:55 Check angles
10:58:55 SkyScan query
10:58:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.07<-20138  Statuses=0008 0009
10:58:55 Msec=750  True Az=112.995  Ze=-122.07  Az status=0008  Ze status=0009
10:58:56 Check angles
10:58:56 SkyScan query
10:58:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.59<-18706  Statuses=0008 0009
10:58:56 Msec=1500  True Az=112.995  Ze=-100.59  Az status=0008  Ze status=0009
10:58:56 Check angles
10:58:56 SkyScan query
10:58:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.74<-17316  Statuses=0008 0009
10:58:57 Msec=2250  True Az=112.995  Ze=-79.74  Az status=0008  Ze status=0009
10:58:57 Check angles
10:58:57 SkyScan query
10:58:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.8<-15920  Statuses=0008 0009
10:58:58 Msec=3000  True Az=112.995  Ze=-58.8  Az status=0008  Ze status=0009
10:58:58 Check angles
10:58:58 SkyScan query
10:58:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.83<-14522  Statuses=0008 0009
10:58:59 Msec=3750  True Az=112.995  Ze=-37.83  Az status=0008  Ze status=0009
10:58:59 Check angles
10:58:59 SkyScan query
10:58:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
10:58:59 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
10:58:59 Check angles
10:58:59 SkyScan query
10:59:00 SkyScan query done: ret=0  az=112.995<-7533  ze=4.08<-11728  Statuses=0008 0009
10:59:00 Msec=5250  True Az=112.995  Ze=4.08  Az status=0008  Ze status=0009
10:59:00 Check angles
10:59:00 SkyScan query
10:59:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
10:59:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
10:59:01 Message to Master queued w/err=0: serial=191376 error=0
10:59:06 Received message from Master: op=Filter serial=191377
10:59:06 Color wheel filter change from 0 to 0
10:59:06 FLIGetFilterPos err=0  currentPosition=0
10:59:06 FLIGetStepsRemaining err=0  RemainingSteps=0
10:59:06 Filter is already there-color wheel unchanged
10:59:06 Received message from Master: op=Shutter serial=191378
10:59:06 Shutter LASER close
10:59:06 Received message from Camera: op=State serial=191380
10:59:06 GetSingleValue result=40  Value=cccccccc
10:59:06 SkyScan query
10:59:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:59:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:59:07 Parameters OK
10:59:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:59:07 Set A/D data flow result=40
10:59:07 Set A/D channel type result=40
10:59:07 Set A/D encoding result=40
10:59:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:59:07 Set channel filter=0.000000e+000  result=40
10:59:07 Config A/D  Result=40
10:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:59:07 Get A/D filter: -9.255963e+061  result=40
10:59:07 Get A/D value=-858993460  result=40
10:59:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:59:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:59:07 Parameters OK
10:59:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:59:07 Set A/D data flow result=40
10:59:07 Set A/D channel type result=40
10:59:07 Set A/D encoding result=40
10:59:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:59:07 Set channel filter=0.000000e+000  result=40
10:59:07 Config A/D  Result=40
10:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:59:07 Get A/D filter: -9.255963e+061  result=40
10:59:07 Get A/D value=-858993460  result=40
10:59:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:59:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:59:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:59:07 Aux=
10:59:07 Message to Camera, serial 191380 queued
10:59:43 Received message from Master: op=PointingHead serial=191393
10:59:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
10:59:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
10:59:44 Point started: ret=0
10:59:44 point_skyscan result=0
10:59:45 Check angles
10:59:45 SkyScan query
10:59:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:59:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
10:59:45 Message to Master queued w/err=0: serial=191393 error=0
10:59:50 Received message from Master: op=Filter serial=191394
10:59:50 Color wheel filter change from 0 to 0
10:59:50 FLIGetFilterPos err=0  currentPosition=0
10:59:50 FLIGetStepsRemaining err=0  RemainingSteps=0
10:59:50 Filter is already there-color wheel unchanged
10:59:50 Received message from Master: op=Shutter serial=191395
10:59:50 Shutter LASER close
10:59:50 Received message from Camera: op=State serial=191397
10:59:50 GetSingleValue result=40  Value=cccccccc
10:59:50 SkyScan query
10:59:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
10:59:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:59:51 Parameters OK
10:59:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:59:51 Set A/D data flow result=40
10:59:51 Set A/D channel type result=40
10:59:51 Set A/D encoding result=40
10:59:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:59:51 Set channel filter=0.000000e+000  result=40
10:59:51 Config A/D  Result=40
10:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:59:51 Get A/D filter: -9.255963e+061  result=40
10:59:51 Get A/D value=-858993460  result=40
10:59:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:59:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
10:59:51 Parameters OK
10:59:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
10:59:51 Set A/D data flow result=40
10:59:51 Set A/D channel type result=40
10:59:51 Set A/D encoding result=40
10:59:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
10:59:51 Set channel filter=0.000000e+000  result=40
10:59:51 Config A/D  Result=40
10:59:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
10:59:51 Get A/D filter: -9.255963e+061  result=40
10:59:51 Get A/D value=-858993460  result=40
10:59:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
10:59:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
10:59:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
10:59:51 Aux=
10:59:51 Message to Camera, serial 191397 queued
11:00:28 Received message from Master: op=PointingHead serial=191410
11:00:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:00:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:00:28 Point started: ret=0
11:00:28 point_skyscan result=0
11:00:29 Check angles
11:00:29 SkyScan query
11:00:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:00:30 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:00:30 Message to Master queued w/err=0: serial=191410 error=0
11:00:35 Received message from Master: op=Filter serial=191411
11:00:35 Color wheel filter change from 0 to 0
11:00:35 FLIGetFilterPos err=0  currentPosition=0
11:00:35 FLIGetStepsRemaining err=0  RemainingSteps=0
11:00:35 Filter is already there-color wheel unchanged
11:00:35 Received message from Master: op=Shutter serial=191412
11:00:35 Shutter LASER close
11:00:35 Received message from Camera: op=State serial=191414
11:00:35 GetSingleValue result=40  Value=cccccccc
11:00:35 SkyScan query
11:00:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:00:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:00:35 Parameters OK
11:00:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:00:35 Set A/D data flow result=40
11:00:35 Set A/D channel type result=40
11:00:35 Set A/D encoding result=40
11:00:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:00:35 Set channel filter=0.000000e+000  result=40
11:00:35 Config A/D  Result=40
11:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:00:35 Get A/D filter: -9.255963e+061  result=40
11:00:35 Get A/D value=-858993460  result=40
11:00:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:00:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:00:35 Parameters OK
11:00:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:00:35 Set A/D data flow result=40
11:00:35 Set A/D channel type result=40
11:00:35 Set A/D encoding result=40
11:00:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:00:35 Set channel filter=0.000000e+000  result=40
11:00:35 Config A/D  Result=40
11:00:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:00:35 Get A/D filter: -9.255963e+061  result=40
11:00:35 Get A/D value=-858993460  result=40
11:00:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:00:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:00:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:00:35 Aux=
11:00:35 Message to Camera, serial 191414 queued
11:01:12 Received message from Master: op=PointingHead serial=191427
11:01:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:01:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:01:13 Point started: ret=0
11:01:13 point_skyscan result=0
11:01:13 Check angles
11:01:13 SkyScan query
11:01:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:01:14 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:01:14 Message to Master queued w/err=0: serial=191427 error=0
11:01:19 Received message from Master: op=Filter serial=191428
11:01:19 Color wheel filter change from 0 to 0
11:01:19 FLIGetFilterPos err=0  currentPosition=0
11:01:19 FLIGetStepsRemaining err=0  RemainingSteps=0
11:01:19 Filter is already there-color wheel unchanged
11:01:19 Received message from Master: op=Shutter serial=191429
11:01:19 Shutter LASER close
11:01:19 Received message from Camera: op=State serial=191431
11:01:19 GetSingleValue result=40  Value=cccccccc
11:01:19 SkyScan query
11:01:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:01:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:01:20 Parameters OK
11:01:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:01:20 Set A/D data flow result=40
11:01:20 Set A/D channel type result=40
11:01:20 Set A/D encoding result=40
11:01:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:01:20 Set channel filter=0.000000e+000  result=40
11:01:20 Config A/D  Result=40
11:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:01:20 Get A/D filter: -9.255963e+061  result=40
11:01:20 Get A/D value=-858993460  result=40
11:01:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:01:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:01:20 Parameters OK
11:01:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:01:20 Set A/D data flow result=40
11:01:20 Set A/D channel type result=40
11:01:20 Set A/D encoding result=40
11:01:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:01:20 Set channel filter=0.000000e+000  result=40
11:01:20 Config A/D  Result=40
11:01:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:01:20 Get A/D filter: -9.255963e+061  result=40
11:01:20 Get A/D value=-858993460  result=40
11:01:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:01:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:01:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:01:20 Aux=
11:01:20 Message to Camera, serial 191431 queued
11:01:56 Received message from Master: op=PointingHead serial=191444
11:01:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:01:56 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:01:57 Point started: ret=0
11:01:57 point_skyscan result=0
11:01:58 Check angles
11:01:58 SkyScan query
11:01:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
11:01:58 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
11:01:58 Check angles
11:01:58 SkyScan query
11:01:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.535<-14969  Statuses=0008 0009
11:01:59 Msec=750  True Az=112.995  Ze=-44.535  Az status=0008  Ze status=0009
11:01:59 Check angles
11:01:59 SkyScan query
11:02:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.49<-16366  Statuses=0008 0009
11:02:00 Msec=1500  True Az=112.995  Ze=-65.49  Az status=0008  Ze status=0009
11:02:00 Check angles
11:02:00 SkyScan query
11:02:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.43<-17762  Statuses=0008 0009
11:02:00 Msec=2250  True Az=112.995  Ze=-86.43  Az status=0008  Ze status=0009
11:02:01 Check angles
11:02:01 SkyScan query
11:02:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.385<-19159  Statuses=0008 0009
11:02:01 Msec=3000  True Az=112.995  Ze=-107.385  Az status=0008  Ze status=0009
11:02:01 Check angles
11:02:01 SkyScan query
11:02:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.31<-20554  Statuses=0008 0009
11:02:02 Msec=3750  True Az=112.995  Ze=-128.31  Az status=0008  Ze status=0009
11:02:02 Check angles
11:02:02 SkyScan query
11:02:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.325<-21955  Statuses=0008 0009
11:02:03 Msec=4500  True Az=112.995  Ze=-149.325  Az status=0008  Ze status=0009
11:02:03 Check angles
11:02:03 SkyScan query
11:02:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.235<-23349  Statuses=0008 0009
11:02:03 Msec=5250  True Az=112.995  Ze=-170.235  Az status=0008  Ze status=0009
11:02:04 Check angles
11:02:04 SkyScan query
11:02:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:02:04 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:02:04 Message to Master queued w/err=0: serial=191444 error=0
11:02:09 Received message from Master: op=Filter serial=191445
11:02:09 Color wheel filter change from 0 to 0
11:02:09 FLIGetFilterPos err=0  currentPosition=0
11:02:09 FLIGetStepsRemaining err=0  RemainingSteps=0
11:02:09 Filter is already there-color wheel unchanged
11:02:09 Received message from Master: op=Shutter serial=191446
11:02:09 Shutter LASER open
11:02:10 Received message from Camera: op=State serial=191448
11:02:10 GetSingleValue result=40  Value=cccccccc
11:02:10 SkyScan query
11:02:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:02:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:02:10 Parameters OK
11:02:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:02:10 Set A/D data flow result=40
11:02:10 Set A/D channel type result=40
11:02:10 Set A/D encoding result=40
11:02:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:02:10 Set channel filter=0.000000e+000  result=40
11:02:10 Config A/D  Result=40
11:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:02:10 Get A/D filter: -9.255963e+061  result=40
11:02:10 Get A/D value=-858993460  result=40
11:02:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:02:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:02:10 Parameters OK
11:02:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:02:10 Set A/D data flow result=40
11:02:10 Set A/D channel type result=40
11:02:10 Set A/D encoding result=40
11:02:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:02:10 Set channel filter=0.000000e+000  result=40
11:02:10 Config A/D  Result=40
11:02:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:02:10 Get A/D filter: -9.255963e+061  result=40
11:02:10 Get A/D value=-858993460  result=40
11:02:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:02:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:02:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:02:10 Aux=
11:02:10 Message to Camera, serial 191448 queued
11:02:19 Received message from Master: op=Shutter serial=191458
11:02:19 Shutter LASER close
11:02:19 Received message from Master: op=PointingHead serial=191462
11:02:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:02:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:02:19 Point started: ret=0
11:02:19 point_skyscan result=0
11:02:20 Check angles
11:02:20 SkyScan query
11:02:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.875<-21525  Statuses=0008 0009
11:02:21 Msec=0  True Az=112.995  Ze=-142.875  Az status=0008  Ze status=0009
11:02:21 Check angles
11:02:21 SkyScan query
11:02:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.485<-20099  Statuses=0008 0009
11:02:22 Msec=750  True Az=112.995  Ze=-121.485  Az status=0008  Ze status=0009
11:02:22 Check angles
11:02:22 SkyScan query
11:02:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.53<-18702  Statuses=0008 0009
11:02:22 Msec=1500  True Az=112.995  Ze=-100.53  Az status=0008  Ze status=0009
11:02:23 Check angles
11:02:23 SkyScan query
11:02:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.575<-17305  Statuses=0008 0009
11:02:23 Msec=2250  True Az=112.995  Ze=-79.575  Az status=0008  Ze status=0009
11:02:23 Check angles
11:02:23 SkyScan query
11:02:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.62<-15908  Statuses=0008 0009
11:02:24 Msec=3000  True Az=112.995  Ze=-58.62  Az status=0008  Ze status=0009
11:02:24 Check angles
11:02:24 SkyScan query
11:02:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.665<-14511  Statuses=0008 0009
11:02:25 Msec=3750  True Az=112.995  Ze=-37.665  Az status=0008  Ze status=0009
11:02:25 Check angles
11:02:25 SkyScan query
11:02:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.26<-13084  Statuses=0008 0009
11:02:25 Msec=4500  True Az=112.995  Ze=-16.26  Az status=0008  Ze status=0009
11:02:26 Check angles
11:02:26 SkyScan query
11:02:26 SkyScan query done: ret=0  az=112.995<-7533  ze=4.56<-11696  Statuses=0008 0009
11:02:26 Msec=5250  True Az=112.995  Ze=4.56  Az status=0008  Ze status=0009
11:02:26 Check angles
11:02:26 SkyScan query
11:02:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:02:27 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:02:27 Message to Master queued w/err=0: serial=191462 error=0
11:02:32 Received message from Master: op=Filter serial=191463
11:02:32 Color wheel filter change from 0 to 0
11:02:32 FLIGetFilterPos err=0  currentPosition=0
11:02:32 FLIGetStepsRemaining err=0  RemainingSteps=0
11:02:32 Filter is already there-color wheel unchanged
11:02:32 Received message from Master: op=Shutter serial=191464
11:02:32 Shutter LASER close
11:02:32 Received message from Camera: op=State serial=191466
11:02:32 GetSingleValue result=40  Value=cccccccc
11:02:32 SkyScan query
11:02:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:02:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:02:33 Parameters OK
11:02:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:02:33 Set A/D data flow result=40
11:02:33 Set A/D channel type result=40
11:02:33 Set A/D encoding result=40
11:02:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:02:33 Set channel filter=0.000000e+000  result=40
11:02:33 Config A/D  Result=40
11:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:02:33 Get A/D filter: -9.255963e+061  result=40
11:02:33 Get A/D value=-858993460  result=40
11:02:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:02:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:02:33 Parameters OK
11:02:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:02:33 Set A/D data flow result=40
11:02:33 Set A/D channel type result=40
11:02:33 Set A/D encoding result=40
11:02:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:02:33 Set channel filter=0.000000e+000  result=40
11:02:33 Config A/D  Result=40
11:02:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:02:33 Get A/D filter: -9.255963e+061  result=40
11:02:33 Get A/D value=-858993460  result=40
11:02:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:02:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:02:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:02:33 Aux=
11:02:33 Message to Camera, serial 191466 queued
11:03:10 Received message from Master: op=PointingHead serial=191479
11:03:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:03:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:03:10 Point started: ret=0
11:03:10 point_skyscan result=0
11:03:11 Check angles
11:03:11 SkyScan query
11:03:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:03:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:03:11 Message to Master queued w/err=0: serial=191479 error=0
11:03:16 Received message from Master: op=Filter serial=191480
11:03:16 Color wheel filter change from 0 to 0
11:03:16 FLIGetFilterPos err=0  currentPosition=0
11:03:16 FLIGetStepsRemaining err=0  RemainingSteps=0
11:03:16 Filter is already there-color wheel unchanged
11:03:16 Received message from Master: op=Shutter serial=191481
11:03:16 Shutter LASER close
11:03:17 Received message from Camera: op=State serial=191483
11:03:17 GetSingleValue result=40  Value=cccccccc
11:03:17 SkyScan query
11:03:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:03:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:03:17 Parameters OK
11:03:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:03:17 Set A/D data flow result=40
11:03:17 Set A/D channel type result=40
11:03:17 Set A/D encoding result=40
11:03:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:03:17 Set channel filter=0.000000e+000  result=40
11:03:17 Config A/D  Result=40
11:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:03:17 Get A/D filter: -9.255963e+061  result=40
11:03:17 Get A/D value=-858993460  result=40
11:03:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:03:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:03:17 Parameters OK
11:03:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:03:17 Set A/D data flow result=40
11:03:17 Set A/D channel type result=40
11:03:17 Set A/D encoding result=40
11:03:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:03:17 Set channel filter=0.000000e+000  result=40
11:03:17 Config A/D  Result=40
11:03:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:03:17 Get A/D filter: -9.255963e+061  result=40
11:03:17 Get A/D value=-858993460  result=40
11:03:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:03:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:03:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:03:17 Aux=
11:03:17 Message to Camera, serial 191483 queued
11:03:36 Received message from Master: op=Identify serial=191484
[UTC 2019-3-9  11:03:48]
11:03:54 Received message from Master: op=PointingHead serial=191499
11:03:54 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:03:54 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:03:54 Point started: ret=0
11:03:54 point_skyscan result=0
11:03:55 Check angles
11:03:55 SkyScan query
11:03:56 SkyScan query done: ret=0  az=136.47<-9098  ze=-6.51<-12434  Statuses=0009 0008
11:03:56 Msec=0  True Az=136.47  Ze=-6.51  Az status=0009  Ze status=0008
11:03:56 Check angles
11:03:56 SkyScan query
11:03:56 SkyScan query done: ret=0  az=153.93<-10262  ze=-6.495<-12433  Statuses=0009 0008
11:03:56 Msec=750  True Az=153.93  Ze=-6.495  Az status=0009  Ze status=0008
11:03:57 Check angles
11:03:57 SkyScan query
11:03:57 SkyScan query done: ret=0  az=171.33<-11422  ze=-6.495<-12433  Statuses=0009 0008
11:03:57 Msec=1500  True Az=171.33  Ze=-6.495  Az status=0009  Ze status=0008
11:03:57 Check angles
11:03:57 SkyScan query
11:03:58 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:03:58 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:03:58 Message to Master queued w/err=0: serial=191499 error=0
11:04:03 Received message from Master: op=Filter serial=191500
11:04:03 Color wheel filter change from 0 to 0
11:04:03 FLIGetFilterPos err=0  currentPosition=0
11:04:03 FLIGetStepsRemaining err=0  RemainingSteps=0
11:04:03 Filter is already there-color wheel unchanged
11:04:03 Received message from Master: op=Shutter serial=191501
11:04:03 Shutter LASER close
11:04:03 Received message from Camera: op=State serial=191503
11:04:03 GetSingleValue result=40  Value=cccccccc
11:04:03 SkyScan query
11:04:04 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:04:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:04:04 Parameters OK
11:04:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:04:04 Set A/D data flow result=40
11:04:04 Set A/D channel type result=40
11:04:04 Set A/D encoding result=40
11:04:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:04:04 Set channel filter=0.000000e+000  result=40
11:04:04 Config A/D  Result=40
11:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:04:04 Get A/D filter: -9.255963e+061  result=40
11:04:04 Get A/D value=-858993460  result=40
11:04:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:04:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:04:04 Parameters OK
11:04:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:04:04 Set A/D data flow result=40
11:04:04 Set A/D channel type result=40
11:04:04 Set A/D encoding result=40
11:04:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:04:04 Set channel filter=0.000000e+000  result=40
11:04:04 Config A/D  Result=40
11:04:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:04:04 Get A/D filter: -9.255963e+061  result=40
11:04:04 Get A/D value=-858993460  result=40
11:04:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:04:04 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:04:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:04:04 Aux=
11:04:04 Message to Camera, serial 191503 queued
11:04:41 Received message from Master: op=PointingHead serial=191516
11:04:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:04:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:04:41 Point started: ret=0
11:04:41 point_skyscan result=0
11:04:42 Check angles
11:04:42 SkyScan query
11:04:42 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
11:04:42 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
11:04:42 Check angles
11:04:42 SkyScan query
11:04:43 SkyScan query done: ret=0  az=135.135<-9009  ze=6.495<-11567  Statuses=0009 0008
11:04:43 Msec=750  True Az=135.135  Ze=6.495  Az status=0009  Ze status=0008
11:04:43 Check angles
11:04:43 SkyScan query
11:04:44 SkyScan query done: ret=0  az=117.255<-7817  ze=6.495<-11567  Statuses=0009 0008
11:04:44 Msec=1500  True Az=117.255  Ze=6.495  Az status=0009  Ze status=0008
11:04:44 Check angles
11:04:44 SkyScan query
11:04:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:04:44 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:04:44 Message to Master queued w/err=0: serial=191516 error=0
11:04:49 Received message from Master: op=Filter serial=191517
11:04:49 Color wheel filter change from 0 to 0
11:04:49 FLIGetFilterPos err=0  currentPosition=0
11:04:49 FLIGetStepsRemaining err=0  RemainingSteps=0
11:04:49 Filter is already there-color wheel unchanged
11:04:50 Received message from Master: op=Shutter serial=191518
11:04:50 Shutter LASER close
11:04:50 Received message from Camera: op=State serial=191520
11:04:50 GetSingleValue result=40  Value=cccccccc
11:04:50 SkyScan query
11:04:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:04:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:04:50 Parameters OK
11:04:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:04:50 Set A/D data flow result=40
11:04:50 Set A/D channel type result=40
11:04:50 Set A/D encoding result=40
11:04:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:04:50 Set channel filter=0.000000e+000  result=40
11:04:50 Config A/D  Result=40
11:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:04:50 Get A/D filter: -9.255963e+061  result=40
11:04:50 Get A/D value=-858993460  result=40
11:04:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:04:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:04:50 Parameters OK
11:04:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:04:50 Set A/D data flow result=40
11:04:50 Set A/D channel type result=40
11:04:50 Set A/D encoding result=40
11:04:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:04:50 Set channel filter=0.000000e+000  result=40
11:04:50 Config A/D  Result=40
11:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:04:50 Get A/D filter: -9.255963e+061  result=40
11:04:50 Get A/D value=-858993460  result=40
11:04:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:04:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:04:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:04:50 Aux=
11:04:50 Message to Camera, serial 191520 queued
11:05:26 Received message from Master: op=PointingHead serial=191532
11:05:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:05:26 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:05:27 Point started: ret=0
11:05:27 point_skyscan result=0
11:05:27 Check angles
11:05:27 SkyScan query
11:05:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
11:05:28 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
11:05:28 Check angles
11:05:28 SkyScan query
11:05:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.82<-14988  Statuses=0008 0009
11:05:29 Msec=750  True Az=112.995  Ze=-44.82  Az status=0008  Ze status=0009
11:05:29 Check angles
11:05:29 SkyScan query
11:05:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.76<-16384  Statuses=0008 0009
11:05:29 Msec=1500  True Az=112.995  Ze=-65.76  Az status=0008  Ze status=0009
11:05:30 Check angles
11:05:30 SkyScan query
11:05:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
11:05:30 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
11:05:30 Check angles
11:05:30 SkyScan query
11:05:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
11:05:31 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
11:05:31 Check angles
11:05:31 SkyScan query
11:05:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.61<-20574  Statuses=0008 0009
11:05:32 Msec=3750  True Az=112.995  Ze=-128.61  Az status=0008  Ze status=0009
11:05:32 Check angles
11:05:32 SkyScan query
11:05:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.58<-21972  Statuses=0008 0009
11:05:32 Msec=4500  True Az=112.995  Ze=-149.58  Az status=0008  Ze status=0009
11:05:33 Check angles
11:05:33 SkyScan query
11:05:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.505<-23367  Statuses=0008 0009
11:05:33 Msec=5250  True Az=112.995  Ze=-170.505  Az status=0008  Ze status=0009
11:05:33 Check angles
11:05:33 SkyScan query
11:05:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:05:34 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:05:34 Message to Master queued w/err=0: serial=191532 error=0
11:05:39 Received message from Master: op=Filter serial=191533
11:05:39 Color wheel filter change from 0 to 0
11:05:39 FLIGetFilterPos err=0  currentPosition=0
11:05:39 FLIGetStepsRemaining err=0  RemainingSteps=0
11:05:39 Filter is already there-color wheel unchanged
11:05:39 Received message from Master: op=Shutter serial=191534
11:05:39 Shutter LASER open
11:05:39 Received message from Camera: op=State serial=191536
11:05:39 GetSingleValue result=40  Value=cccccccc
11:05:39 SkyScan query
11:05:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:05:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:05:40 Parameters OK
11:05:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:05:40 Set A/D data flow result=40
11:05:40 Set A/D channel type result=40
11:05:40 Set A/D encoding result=40
11:05:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:05:40 Set channel filter=0.000000e+000  result=40
11:05:40 Config A/D  Result=40
11:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:05:40 Get A/D filter: -9.255963e+061  result=40
11:05:40 Get A/D value=-858993460  result=40
11:05:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:05:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:05:40 Parameters OK
11:05:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:05:40 Set A/D data flow result=40
11:05:40 Set A/D channel type result=40
11:05:40 Set A/D encoding result=40
11:05:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:05:40 Set channel filter=0.000000e+000  result=40
11:05:40 Config A/D  Result=40
11:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:05:40 Get A/D filter: -9.255963e+061  result=40
11:05:40 Get A/D value=-858993460  result=40
11:05:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:05:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:05:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:05:40 Aux=
11:05:40 Message to Camera, serial 191536 queued
11:05:48 Received message from Master: op=Shutter serial=191546
11:05:48 Shutter LASER close
11:05:49 Received message from Master: op=PointingHead serial=191550
11:05:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:05:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:05:49 Point started: ret=0
11:05:49 point_skyscan result=0
11:05:50 Check angles
11:05:50 SkyScan query
11:05:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
11:05:50 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
11:05:51 Check angles
11:05:51 SkyScan query
11:05:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.52<-20168  Statuses=0008 0009
11:05:51 Msec=750  True Az=112.995  Ze=-122.52  Az status=0008  Ze status=0009
11:05:51 Check angles
11:05:51 SkyScan query
11:05:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.55<-18770  Statuses=0008 0009
11:05:52 Msec=1500  True Az=112.995  Ze=-101.55  Az status=0008  Ze status=0009
11:05:52 Check angles
11:05:52 SkyScan query
11:05:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.565<-17371  Statuses=0008 0009
11:05:53 Msec=2250  True Az=112.995  Ze=-80.565  Az status=0008  Ze status=0009
11:05:53 Check angles
11:05:53 SkyScan query
11:05:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.64<-15976  Statuses=0008 0009
11:05:53 Msec=3000  True Az=112.995  Ze=-59.64  Az status=0008  Ze status=0009
11:05:54 Check angles
11:05:54 SkyScan query
11:05:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.235<-14549  Statuses=0008 0009
11:05:54 Msec=3750  True Az=112.995  Ze=-38.235  Az status=0008  Ze status=0009
11:05:54 Check angles
11:05:54 SkyScan query
11:05:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.295<-13153  Statuses=0008 0009
11:05:55 Msec=4500  True Az=112.995  Ze=-17.295  Az status=0008  Ze status=0009
11:05:55 Check angles
11:05:55 SkyScan query
11:05:56 SkyScan query done: ret=0  az=112.995<-7533  ze=3.675<-11755  Statuses=0008 0009
11:05:56 Msec=5250  True Az=112.995  Ze=3.675  Az status=0008  Ze status=0009
11:05:56 Check angles
11:05:56 SkyScan query
11:05:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:05:56 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:05:56 Message to Master queued w/err=0: serial=191550 error=0
11:06:01 Received message from Master: op=Filter serial=191551
11:06:01 Color wheel filter change from 0 to 0
11:06:01 FLIGetFilterPos err=0  currentPosition=0
11:06:01 FLIGetStepsRemaining err=0  RemainingSteps=0
11:06:01 Filter is already there-color wheel unchanged
11:06:02 Received message from Master: op=Shutter serial=191552
11:06:02 Shutter LASER close
11:06:02 Received message from Camera: op=State serial=191554
11:06:02 GetSingleValue result=40  Value=cccccccc
11:06:02 SkyScan query
11:06:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:06:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:06:02 Parameters OK
11:06:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:06:02 Set A/D data flow result=40
11:06:02 Set A/D channel type result=40
11:06:02 Set A/D encoding result=40
11:06:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:06:02 Set channel filter=0.000000e+000  result=40
11:06:02 Config A/D  Result=40
11:06:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:06:02 Get A/D filter: -9.255963e+061  result=40
11:06:02 Get A/D value=-858993460  result=40
11:06:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:06:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:06:02 Parameters OK
11:06:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:06:02 Set A/D data flow result=40
11:06:02 Set A/D channel type result=40
11:06:02 Set A/D encoding result=40
11:06:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:06:02 Set channel filter=0.000000e+000  result=40
11:06:02 Config A/D  Result=40
11:06:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:06:02 Get A/D filter: -9.255963e+061  result=40
11:06:02 Get A/D value=-858993460  result=40
11:06:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:06:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:06:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:06:02 Aux=
11:06:02 Message to Camera, serial 191554 queued
11:06:39 Received message from Master: op=PointingHead serial=191567
11:06:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:06:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:06:39 Point started: ret=0
11:06:39 point_skyscan result=0
11:06:40 Check angles
11:06:40 SkyScan query
11:06:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:06:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:06:41 Message to Master queued w/err=0: serial=191567 error=0
11:06:46 Received message from Master: op=Filter serial=191568
11:06:46 Color wheel filter change from 0 to 0
11:06:46 FLIGetFilterPos err=0  currentPosition=0
11:06:46 FLIGetStepsRemaining err=0  RemainingSteps=0
11:06:46 Filter is already there-color wheel unchanged
11:06:46 Received message from Master: op=Shutter serial=191569
11:06:46 Shutter LASER close
11:06:46 Received message from Camera: op=State serial=191571
11:06:46 GetSingleValue result=40  Value=cccccccc
11:06:46 SkyScan query
11:06:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:06:47 Parameters OK
11:06:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:06:47 Set A/D data flow result=40
11:06:47 Set A/D channel type result=40
11:06:47 Set A/D encoding result=40
11:06:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:06:47 Set channel filter=0.000000e+000  result=40
11:06:47 Config A/D  Result=40
11:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:06:47 Get A/D filter: -9.255963e+061  result=40
11:06:47 Get A/D value=-858993460  result=40
11:06:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:06:47 Parameters OK
11:06:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:06:47 Set A/D data flow result=40
11:06:47 Set A/D channel type result=40
11:06:47 Set A/D encoding result=40
11:06:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:06:47 Set channel filter=0.000000e+000  result=40
11:06:47 Config A/D  Result=40
11:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:06:47 Get A/D filter: -9.255963e+061  result=40
11:06:47 Get A/D value=-858993460  result=40
11:06:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:06:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:06:47 Aux=
11:06:47 Message to Camera, serial 191571 queued
11:07:23 Received message from Master: op=PointingHead serial=191584
11:07:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:07:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:07:24 Point started: ret=0
11:07:24 point_skyscan result=0
11:07:25 Check angles
11:07:25 SkyScan query
11:07:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:07:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:07:25 Message to Master queued w/err=0: serial=191584 error=0
11:07:30 Received message from Master: op=Filter serial=191585
11:07:30 Color wheel filter change from 0 to 0
11:07:30 FLIGetFilterPos err=0  currentPosition=0
11:07:30 FLIGetStepsRemaining err=0  RemainingSteps=0
11:07:30 Filter is already there-color wheel unchanged
11:07:30 Received message from Master: op=Shutter serial=191586
11:07:30 Shutter LASER close
11:07:30 Received message from Camera: op=State serial=191588
11:07:30 GetSingleValue result=40  Value=cccccccc
11:07:30 SkyScan query
11:07:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:07:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:07:31 Parameters OK
11:07:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:07:31 Set A/D data flow result=40
11:07:31 Set A/D channel type result=40
11:07:31 Set A/D encoding result=40
11:07:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:07:31 Set channel filter=0.000000e+000  result=40
11:07:31 Config A/D  Result=40
11:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:07:31 Get A/D filter: -9.255963e+061  result=40
11:07:31 Get A/D value=-858993460  result=40
11:07:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:07:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:07:31 Parameters OK
11:07:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:07:31 Set A/D data flow result=40
11:07:31 Set A/D channel type result=40
11:07:31 Set A/D encoding result=40
11:07:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:07:31 Set channel filter=0.000000e+000  result=40
11:07:31 Config A/D  Result=40
11:07:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:07:31 Get A/D filter: -9.255963e+061  result=40
11:07:31 Get A/D value=-858993460  result=40
11:07:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:07:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:07:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:07:31 Aux=
11:07:31 Message to Camera, serial 191588 queued
11:08:08 Received message from Master: op=PointingHead serial=191601
11:08:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:08:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:08:08 Point started: ret=0
11:08:08 point_skyscan result=0
11:08:09 Check angles
11:08:09 SkyScan query
11:08:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:08:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:08:09 Message to Master queued w/err=0: serial=191601 error=0
11:08:14 Received message from Master: op=Filter serial=191602
11:08:14 Color wheel filter change from 0 to 0
11:08:14 FLIGetFilterPos err=0  currentPosition=0
11:08:14 FLIGetStepsRemaining err=0  RemainingSteps=0
11:08:14 Filter is already there-color wheel unchanged
11:08:15 Received message from Master: op=Shutter serial=191603
11:08:15 Shutter LASER close
11:08:15 Received message from Camera: op=State serial=191605
11:08:15 GetSingleValue result=40  Value=cccccccc
11:08:15 SkyScan query
11:08:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:08:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:08:15 Parameters OK
11:08:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:08:15 Set A/D data flow result=40
11:08:15 Set A/D channel type result=40
11:08:15 Set A/D encoding result=40
11:08:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:08:15 Set channel filter=0.000000e+000  result=40
11:08:15 Config A/D  Result=40
11:08:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:08:15 Get A/D filter: -9.255963e+061  result=40
11:08:15 Get A/D value=-858993460  result=40
11:08:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:08:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:08:15 Parameters OK
11:08:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:08:15 Set A/D data flow result=40
11:08:15 Set A/D channel type result=40
11:08:15 Set A/D encoding result=40
11:08:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:08:15 Set channel filter=0.000000e+000  result=40
11:08:15 Config A/D  Result=40
11:08:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:08:15 Get A/D filter: -9.255963e+061  result=40
11:08:15 Get A/D value=-858993460  result=40
11:08:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:08:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:08:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:08:15 Aux=
11:08:15 Message to Camera, serial 191605 queued
11:08:52 Received message from Master: op=PointingHead serial=191618
11:08:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:08:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:08:52 Point started: ret=0
11:08:52 point_skyscan result=0
11:08:53 Check angles
11:08:53 SkyScan query
11:08:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.685<-13579  Statuses=0008 0009
11:08:54 Msec=0  True Az=112.995  Ze=-23.685  Az status=0008  Ze status=0009
11:08:54 Check angles
11:08:54 SkyScan query
11:08:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.075<-15005  Statuses=0008 0009
11:08:54 Msec=750  True Az=112.995  Ze=-45.075  Az status=0008  Ze status=0009
11:08:55 Check angles
11:08:55 SkyScan query
11:08:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.03<-16402  Statuses=0008 0009
11:08:55 Msec=1500  True Az=112.995  Ze=-66.03  Az status=0008  Ze status=0009
11:08:55 Check angles
11:08:55 SkyScan query
11:08:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.97<-17798  Statuses=0008 0009
11:08:56 Msec=2250  True Az=112.995  Ze=-86.97  Az status=0008  Ze status=0009
11:08:56 Check angles
11:08:56 SkyScan query
11:08:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.925<-19195  Statuses=0008 0009
11:08:57 Msec=3000  True Az=112.995  Ze=-107.925  Az status=0008  Ze status=0009
11:08:57 Check angles
11:08:57 SkyScan query
11:08:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.865<-20591  Statuses=0008 0009
11:08:57 Msec=3750  True Az=112.995  Ze=-128.865  Az status=0008  Ze status=0009
11:08:58 Check angles
11:08:58 SkyScan query
11:08:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.835<-21989  Statuses=0008 0009
11:08:58 Msec=4500  True Az=112.995  Ze=-149.835  Az status=0008  Ze status=0009
11:08:58 Check angles
11:08:58 SkyScan query
11:08:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.73<-23382  Statuses=0008 0009
11:08:59 Msec=5250  True Az=112.995  Ze=-170.73  Az status=0008  Ze status=0009
11:08:59 Check angles
11:08:59 SkyScan query
11:09:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:09:00 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:09:00 Message to Master queued w/err=0: serial=191618 error=0
11:09:05 Received message from Master: op=Filter serial=191619
11:09:05 Color wheel filter change from 0 to 0
11:09:05 FLIGetFilterPos err=0  currentPosition=0
11:09:05 FLIGetStepsRemaining err=0  RemainingSteps=0
11:09:05 Filter is already there-color wheel unchanged
11:09:05 Received message from Master: op=Shutter serial=191620
11:09:05 Shutter LASER open
11:09:05 Received message from Camera: op=State serial=191622
11:09:05 GetSingleValue result=40  Value=cccccccc
11:09:05 SkyScan query
11:09:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:09:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:09:06 Parameters OK
11:09:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:09:06 Set A/D data flow result=40
11:09:06 Set A/D channel type result=40
11:09:06 Set A/D encoding result=40
11:09:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:09:06 Set channel filter=0.000000e+000  result=40
11:09:06 Config A/D  Result=40
11:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:09:06 Get A/D filter: -9.255963e+061  result=40
11:09:06 Get A/D value=-858993460  result=40
11:09:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:09:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:09:06 Parameters OK
11:09:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:09:06 Set A/D data flow result=40
11:09:06 Set A/D channel type result=40
11:09:06 Set A/D encoding result=40
11:09:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:09:06 Set channel filter=0.000000e+000  result=40
11:09:06 Config A/D  Result=40
11:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:09:06 Get A/D filter: -9.255963e+061  result=40
11:09:06 Get A/D value=-858993460  result=40
11:09:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:09:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:09:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:09:06 Aux=
11:09:06 Message to Camera, serial 191622 queued
11:09:14 Received message from Master: op=Shutter serial=191632
11:09:14 Shutter LASER close
11:09:15 Received message from Master: op=PointingHead serial=191636
11:09:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:09:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:09:15 Point started: ret=0
11:09:15 point_skyscan result=0
11:09:16 Check angles
11:09:16 SkyScan query
11:09:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
11:09:16 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
11:09:17 Check angles
11:09:17 SkyScan query
11:09:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.01<-20134  Statuses=0008 0009
11:09:17 Msec=750  True Az=112.995  Ze=-122.01  Az status=0008  Ze status=0009
11:09:17 Check angles
11:09:17 SkyScan query
11:09:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.085<-18739  Statuses=0008 0009
11:09:18 Msec=1500  True Az=112.995  Ze=-101.085  Az status=0008  Ze status=0009
11:09:18 Check angles
11:09:18 SkyScan query
11:09:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
11:09:19 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
11:09:19 Check angles
11:09:19 SkyScan query
11:09:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.19<-15946  Statuses=0008 0009
11:09:19 Msec=3000  True Az=112.995  Ze=-59.19  Az status=0008  Ze status=0009
11:09:20 Check angles
11:09:20 SkyScan query
11:09:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.19<-14546  Statuses=0008 0009
11:09:20 Msec=3750  True Az=112.995  Ze=-38.19  Az status=0008  Ze status=0009
11:09:20 Check angles
11:09:20 SkyScan query
11:09:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
11:09:21 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
11:09:21 Check angles
11:09:21 SkyScan query
11:09:22 SkyScan query done: ret=0  az=112.995<-7533  ze=3.705<-11753  Statuses=0008 0009
11:09:22 Msec=5250  True Az=112.995  Ze=3.705  Az status=0008  Ze status=0009
11:09:22 Check angles
11:09:22 SkyScan query
11:09:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:09:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:09:22 Message to Master queued w/err=0: serial=191636 error=0
11:09:27 Received message from Master: op=Filter serial=191637
11:09:27 Color wheel filter change from 0 to 0
11:09:27 FLIGetFilterPos err=0  currentPosition=0
11:09:27 FLIGetStepsRemaining err=0  RemainingSteps=0
11:09:27 Filter is already there-color wheel unchanged
11:09:28 Received message from Master: op=Shutter serial=191638
11:09:28 Shutter LASER close
11:09:28 Received message from Camera: op=State serial=191640
11:09:28 GetSingleValue result=40  Value=cccccccc
11:09:28 SkyScan query
11:09:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:09:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:09:28 Parameters OK
11:09:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:09:28 Set A/D data flow result=40
11:09:28 Set A/D channel type result=40
11:09:28 Set A/D encoding result=40
11:09:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:09:28 Set channel filter=0.000000e+000  result=40
11:09:28 Config A/D  Result=40
11:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:09:28 Get A/D filter: -9.255963e+061  result=40
11:09:28 Get A/D value=-858993460  result=40
11:09:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:09:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:09:28 Parameters OK
11:09:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:09:28 Set A/D data flow result=40
11:09:28 Set A/D channel type result=40
11:09:28 Set A/D encoding result=40
11:09:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:09:28 Set channel filter=0.000000e+000  result=40
11:09:28 Config A/D  Result=40
11:09:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:09:28 Get A/D filter: -9.255963e+061  result=40
11:09:28 Get A/D value=-858993460  result=40
11:09:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:09:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:09:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:09:28 Aux=
11:09:28 Message to Camera, serial 191640 queued
11:10:05 Received message from Master: op=PointingHead serial=191653
11:10:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:10:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:10:06 Point started: ret=0
11:10:06 point_skyscan result=0
11:10:06 Check angles
11:10:06 SkyScan query
11:10:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:10:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:10:07 Message to Master queued w/err=0: serial=191653 error=0
11:10:12 Received message from Master: op=Filter serial=191654
11:10:12 Color wheel filter change from 0 to 0
11:10:12 FLIGetFilterPos err=0  currentPosition=0
11:10:12 FLIGetStepsRemaining err=0  RemainingSteps=0
11:10:12 Filter is already there-color wheel unchanged
11:10:12 Received message from Master: op=Shutter serial=191655
11:10:12 Shutter LASER close
11:10:12 Received message from Camera: op=State serial=191657
11:10:12 GetSingleValue result=40  Value=cccccccc
11:10:12 SkyScan query
11:10:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:10:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:10:13 Parameters OK
11:10:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:10:13 Set A/D data flow result=40
11:10:13 Set A/D channel type result=40
11:10:13 Set A/D encoding result=40
11:10:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:10:13 Set channel filter=0.000000e+000  result=40
11:10:13 Config A/D  Result=40
11:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:10:13 Get A/D filter: -9.255963e+061  result=40
11:10:13 Get A/D value=-858993460  result=40
11:10:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:10:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:10:13 Parameters OK
11:10:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:10:13 Set A/D data flow result=40
11:10:13 Set A/D channel type result=40
11:10:13 Set A/D encoding result=40
11:10:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:10:13 Set channel filter=0.000000e+000  result=40
11:10:13 Config A/D  Result=40
11:10:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:10:13 Get A/D filter: -9.255963e+061  result=40
11:10:13 Get A/D value=-858993460  result=40
11:10:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:10:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:10:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:10:13 Aux=
11:10:13 Message to Camera, serial 191657 queued
11:10:49 Received message from Master: op=PointingHead serial=191670
11:10:49 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:10:49 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:10:50 Point started: ret=0
11:10:50 point_skyscan result=0
11:10:51 Check angles
11:10:51 SkyScan query
11:10:51 SkyScan query done: ret=0  az=136.185<-9079  ze=-6.51<-12434  Statuses=0009 0008
11:10:51 Msec=0  True Az=136.185  Ze=-6.51  Az status=0009  Ze status=0008
11:10:51 Check angles
11:10:51 SkyScan query
11:10:52 SkyScan query done: ret=0  az=153.705<-10247  ze=-6.495<-12433  Statuses=0009 0008
11:10:52 Msec=750  True Az=153.705  Ze=-6.495  Az status=0009  Ze status=0008
11:10:52 Check angles
11:10:52 SkyScan query
11:10:53 SkyScan query done: ret=0  az=171.12<-11408  ze=-6.495<-12433  Statuses=0009 0008
11:10:53 Msec=1500  True Az=171.12  Ze=-6.495  Az status=0009  Ze status=0008
11:10:53 Check angles
11:10:53 SkyScan query
11:10:53 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:10:53 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:10:53 Message to Master queued w/err=0: serial=191670 error=0
11:10:58 Received message from Master: op=Filter serial=191671
11:10:58 Color wheel filter change from 0 to 0
11:10:58 FLIGetFilterPos err=0  currentPosition=0
11:10:58 FLIGetStepsRemaining err=0  RemainingSteps=0
11:10:58 Filter is already there-color wheel unchanged
11:10:59 Received message from Master: op=Shutter serial=191672
11:10:59 Shutter LASER close
11:10:59 Received message from Camera: op=State serial=191674
11:10:59 GetSingleValue result=40  Value=cccccccc
11:10:59 SkyScan query
11:10:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:10:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:10:59 Parameters OK
11:10:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:10:59 Set A/D data flow result=40
11:10:59 Set A/D channel type result=40
11:10:59 Set A/D encoding result=40
11:10:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:10:59 Set channel filter=0.000000e+000  result=40
11:10:59 Config A/D  Result=40
11:10:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:10:59 Get A/D filter: -9.255963e+061  result=40
11:10:59 Get A/D value=-858993460  result=40
11:10:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:10:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:10:59 Parameters OK
11:10:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:10:59 Set A/D data flow result=40
11:10:59 Set A/D channel type result=40
11:10:59 Set A/D encoding result=40
11:10:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:10:59 Set channel filter=0.000000e+000  result=40
11:10:59 Config A/D  Result=40
11:10:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:10:59 Get A/D filter: -9.255963e+061  result=40
11:10:59 Get A/D value=-858993460  result=40
11:10:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:10:59 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:10:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:10:59 Aux=
11:10:59 Message to Camera, serial 191674 queued
11:11:36 Received message from Master: op=PointingHead serial=191687
11:11:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:11:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:11:36 Point started: ret=0
11:11:36 point_skyscan result=0
11:11:37 Check angles
11:11:37 SkyScan query
11:11:38 SkyScan query done: ret=0  az=152.61<-10174  ze=6.51<-11566  Statuses=0009 0008
11:11:38 Msec=0  True Az=152.61  Ze=6.51  Az status=0009  Ze status=0008
11:11:38 Check angles
11:11:38 SkyScan query
11:11:38 SkyScan query done: ret=0  az=134.655<-8977  ze=6.495<-11567  Statuses=0009 0008
11:11:38 Msec=750  True Az=134.655  Ze=6.495  Az status=0009  Ze status=0008
11:11:39 Check angles
11:11:39 SkyScan query
11:11:39 SkyScan query done: ret=0  az=117.285<-7819  ze=6.495<-11567  Statuses=0009 0008
11:11:39 Msec=1500  True Az=117.285  Ze=6.495  Az status=0009  Ze status=0008
11:11:39 Check angles
11:11:39 SkyScan query
11:11:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:11:40 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:11:40 Message to Master queued w/err=0: serial=191687 error=0
11:11:45 Received message from Master: op=Filter serial=191688
11:11:45 Color wheel filter change from 0 to 0
11:11:45 FLIGetFilterPos err=0  currentPosition=0
11:11:45 FLIGetStepsRemaining err=0  RemainingSteps=0
11:11:45 Filter is already there-color wheel unchanged
11:11:45 Received message from Master: op=Shutter serial=191689
11:11:45 Shutter LASER close
11:11:45 Received message from Camera: op=State serial=191691
11:11:45 GetSingleValue result=40  Value=cccccccc
11:11:45 SkyScan query
11:11:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:11:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:11:46 Parameters OK
11:11:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:11:46 Set A/D data flow result=40
11:11:46 Set A/D channel type result=40
11:11:46 Set A/D encoding result=40
11:11:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:11:46 Set channel filter=0.000000e+000  result=40
11:11:46 Config A/D  Result=40
11:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:11:46 Get A/D filter: -9.255963e+061  result=40
11:11:46 Get A/D value=-858993460  result=40
11:11:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:11:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:11:46 Parameters OK
11:11:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:11:46 Set A/D data flow result=40
11:11:46 Set A/D channel type result=40
11:11:46 Set A/D encoding result=40
11:11:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:11:46 Set channel filter=0.000000e+000  result=40
11:11:46 Config A/D  Result=40
11:11:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:11:46 Get A/D filter: -9.255963e+061  result=40
11:11:46 Get A/D value=-858993460  result=40
11:11:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:11:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:11:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:11:46 Aux=
11:11:46 Message to Camera, serial 191691 queued
11:12:23 Received message from Master: op=PointingHead serial=191704
11:12:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:12:23 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:12:23 Point started: ret=0
11:12:23 point_skyscan result=0
11:12:24 Check angles
11:12:24 SkyScan query
11:12:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
11:12:24 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
11:12:24 Check angles
11:12:24 SkyScan query
11:12:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.34<-14956  Statuses=0008 0009
11:12:25 Msec=750  True Az=112.995  Ze=-44.34  Az status=0008  Ze status=0009
11:12:25 Check angles
11:12:25 SkyScan query
11:12:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
11:12:26 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
11:12:26 Check angles
11:12:26 SkyScan query
11:12:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
11:12:27 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
11:12:27 Check angles
11:12:27 SkyScan query
11:12:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.205<-19147  Statuses=0008 0009
11:12:27 Msec=3000  True Az=112.995  Ze=-107.205  Az status=0008  Ze status=0009
11:12:27 Check angles
11:12:27 SkyScan query
11:12:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.145<-20543  Statuses=0008 0009
11:12:28 Msec=3750  True Az=112.995  Ze=-128.145  Az status=0008  Ze status=0009
11:12:28 Check angles
11:12:28 SkyScan query
11:12:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.115<-21941  Statuses=0008 0009
11:12:29 Msec=4500  True Az=112.995  Ze=-149.115  Az status=0008  Ze status=0009
11:12:29 Check angles
11:12:29 SkyScan query
11:12:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.04<-23336  Statuses=0008 0009
11:12:30 Msec=5250  True Az=112.995  Ze=-170.04  Az status=0008  Ze status=0009
11:12:30 Check angles
11:12:30 SkyScan query
11:12:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:12:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:12:30 Message to Master queued w/err=0: serial=191704 error=0
11:12:35 Received message from Master: op=Filter serial=191705
11:12:35 Color wheel filter change from 0 to 0
11:12:35 FLIGetFilterPos err=0  currentPosition=0
11:12:35 FLIGetStepsRemaining err=0  RemainingSteps=0
11:12:35 Filter is already there-color wheel unchanged
11:12:35 Received message from Master: op=Shutter serial=191706
11:12:35 Shutter LASER open
11:12:36 Received message from Camera: op=State serial=191708
11:12:36 GetSingleValue result=40  Value=cccccccc
11:12:36 SkyScan query
11:12:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:12:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:12:36 Parameters OK
11:12:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:12:36 Set A/D data flow result=40
11:12:36 Set A/D channel type result=40
11:12:36 Set A/D encoding result=40
11:12:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:12:36 Set channel filter=0.000000e+000  result=40
11:12:36 Config A/D  Result=40
11:12:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:12:36 Get A/D filter: -9.255963e+061  result=40
11:12:36 Get A/D value=-858993460  result=40
11:12:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:12:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:12:36 Parameters OK
11:12:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:12:36 Set A/D data flow result=40
11:12:36 Set A/D channel type result=40
11:12:36 Set A/D encoding result=40
11:12:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:12:36 Set channel filter=0.000000e+000  result=40
11:12:36 Config A/D  Result=40
11:12:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:12:36 Get A/D filter: -9.255963e+061  result=40
11:12:36 Get A/D value=-858993460  result=40
11:12:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:12:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:12:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:12:36 Aux=
11:12:36 Message to Camera, serial 191708 queued
11:12:45 Received message from Master: op=Shutter serial=191718
11:12:45 Shutter LASER close
11:12:45 Received message from Master: op=PointingHead serial=191722
11:12:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:12:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:12:45 Point started: ret=0
11:12:45 point_skyscan result=0
11:12:46 Check angles
11:12:46 SkyScan query
11:12:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.92<-21528  Statuses=0008 0009
11:12:47 Msec=0  True Az=112.995  Ze=-142.92  Az status=0008  Ze status=0009
11:12:47 Check angles
11:12:47 SkyScan query
11:12:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
11:12:48 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
11:12:48 Check angles
11:12:48 SkyScan query
11:12:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.995<-18733  Statuses=0008 0009
11:12:48 Msec=1500  True Az=112.995  Ze=-100.995  Az status=0008  Ze status=0009
11:12:48 Check angles
11:12:48 SkyScan query
11:12:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.055<-17337  Statuses=0008 0009
11:12:49 Msec=2250  True Az=112.995  Ze=-80.055  Az status=0008  Ze status=0009
11:12:49 Check angles
11:12:49 SkyScan query
11:12:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.115<-15941  Statuses=0008 0009
11:12:50 Msec=3000  True Az=112.995  Ze=-59.115  Az status=0008  Ze status=0009
11:12:50 Check angles
11:12:50 SkyScan query
11:12:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.115<-14541  Statuses=0008 0009
11:12:51 Msec=3750  True Az=112.995  Ze=-38.115  Az status=0008  Ze status=0009
11:12:51 Check angles
11:12:51 SkyScan query
11:12:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
11:12:51 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
11:12:51 Check angles
11:12:51 SkyScan query
11:12:52 SkyScan query done: ret=0  az=112.995<-7533  ze=3.765<-11749  Statuses=0008 0009
11:12:52 Msec=5250  True Az=112.995  Ze=3.765  Az status=0008  Ze status=0009
11:12:52 Check angles
11:12:52 SkyScan query
11:12:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:12:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:12:53 Message to Master queued w/err=0: serial=191722 error=0
11:12:58 Received message from Master: op=Filter serial=191723
11:12:58 Color wheel filter change from 0 to 0
11:12:58 FLIGetFilterPos err=0  currentPosition=0
11:12:58 FLIGetStepsRemaining err=0  RemainingSteps=0
11:12:58 Filter is already there-color wheel unchanged
11:12:58 Received message from Master: op=Shutter serial=191724
11:12:58 Shutter LASER close
11:12:58 Received message from Camera: op=State serial=191726
11:12:58 GetSingleValue result=40  Value=cccccccc
11:12:58 SkyScan query
11:12:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:12:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:12:59 Parameters OK
11:12:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:12:59 Set A/D data flow result=40
11:12:59 Set A/D channel type result=40
11:12:59 Set A/D encoding result=40
11:12:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:12:59 Set channel filter=0.000000e+000  result=40
11:12:59 Config A/D  Result=40
11:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:12:59 Get A/D filter: -9.255963e+061  result=40
11:12:59 Get A/D value=-858993460  result=40
11:12:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:12:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:12:59 Parameters OK
11:12:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:12:59 Set A/D data flow result=40
11:12:59 Set A/D channel type result=40
11:12:59 Set A/D encoding result=40
11:12:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:12:59 Set channel filter=0.000000e+000  result=40
11:12:59 Config A/D  Result=40
11:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:12:59 Get A/D filter: -9.255963e+061  result=40
11:12:59 Get A/D value=-858993460  result=40
11:12:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:12:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:12:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:12:59 Aux=
11:12:59 Message to Camera, serial 191726 queued
11:13:36 Received message from Master: op=PointingHead serial=191739
11:13:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:13:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:13:36 Point started: ret=0
11:13:36 point_skyscan result=0
11:13:37 Check angles
11:13:37 SkyScan query
11:13:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:13:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:13:37 Message to Master queued w/err=0: serial=191739 error=0
11:13:42 Received message from Master: op=Filter serial=191740
11:13:42 Color wheel filter change from 0 to 0
11:13:42 FLIGetFilterPos err=0  currentPosition=0
11:13:42 FLIGetStepsRemaining err=0  RemainingSteps=0
11:13:42 Filter is already there-color wheel unchanged
11:13:42 Received message from Master: op=Shutter serial=191741
11:13:42 Shutter LASER close
11:13:42 Received message from Camera: op=State serial=191743
11:13:42 GetSingleValue result=40  Value=cccccccc
11:13:42 SkyScan query
11:13:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:13:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:13:43 Parameters OK
11:13:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:13:43 Set A/D data flow result=40
11:13:43 Set A/D channel type result=40
11:13:43 Set A/D encoding result=40
11:13:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:13:43 Set channel filter=0.000000e+000  result=40
11:13:43 Config A/D  Result=40
11:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:13:43 Get A/D filter: -9.255963e+061  result=40
11:13:43 Get A/D value=-858993460  result=40
11:13:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:13:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:13:43 Parameters OK
11:13:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:13:43 Set A/D data flow result=40
11:13:43 Set A/D channel type result=40
[UTC 2019-3-9  11:13:43]
11:13:43 Set A/D encoding result=40
11:13:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:13:43 Set channel filter=0.000000e+000  result=40
11:13:43 Config A/D  Result=40
11:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:13:43 Get A/D filter: -9.255963e+061  result=40
11:13:43 Get A/D value=-858993460  result=40
11:13:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:13:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:13:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:13:43 Aux=
11:13:43 Message to Camera, serial 191743 queued
11:14:20 Received message from Master: op=PointingHead serial=191756
11:14:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:14:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:14:20 Point started: ret=0
11:14:20 point_skyscan result=0
11:14:21 Check angles
11:14:21 SkyScan query
11:14:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:14:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:14:22 Message to Master queued w/err=0: serial=191756 error=0
11:14:27 Received message from Master: op=Filter serial=191757
11:14:27 Color wheel filter change from 0 to 0
11:14:27 FLIGetFilterPos err=0  currentPosition=0
11:14:27 FLIGetStepsRemaining err=0  RemainingSteps=0
11:14:27 Filter is already there-color wheel unchanged
11:14:27 Received message from Master: op=Shutter serial=191758
11:14:27 Shutter LASER close
11:14:27 Received message from Camera: op=State serial=191760
11:14:27 GetSingleValue result=40  Value=cccccccc
11:14:27 SkyScan query
11:14:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:14:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:14:27 Parameters OK
11:14:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:14:27 Set A/D data flow result=40
11:14:27 Set A/D channel type result=40
11:14:27 Set A/D encoding result=40
11:14:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:14:27 Set channel filter=0.000000e+000  result=40
11:14:27 Config A/D  Result=40
11:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:14:27 Get A/D filter: -9.255963e+061  result=40
11:14:27 Get A/D value=-858993460  result=40
11:14:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:14:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:14:27 Parameters OK
11:14:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:14:27 Set A/D data flow result=40
11:14:27 Set A/D channel type result=40
11:14:27 Set A/D encoding result=40
11:14:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:14:27 Set channel filter=0.000000e+000  result=40
11:14:27 Config A/D  Result=40
11:14:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:14:27 Get A/D filter: -9.255963e+061  result=40
11:14:27 Get A/D value=-858993460  result=40
11:14:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:14:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:14:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:14:27 Aux=
11:14:27 Message to Camera, serial 191760 queued
11:15:04 Received message from Master: op=PointingHead serial=191773
11:15:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:15:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:15:05 Point started: ret=0
11:15:05 point_skyscan result=0
11:15:05 Check angles
11:15:05 SkyScan query
11:15:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:15:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:15:06 Message to Master queued w/err=0: serial=191773 error=0
11:15:11 Received message from Master: op=Filter serial=191774
11:15:11 Color wheel filter change from 0 to 0
11:15:11 FLIGetFilterPos err=0  currentPosition=0
11:15:11 FLIGetStepsRemaining err=0  RemainingSteps=0
11:15:11 Filter is already there-color wheel unchanged
11:15:11 Received message from Master: op=Shutter serial=191775
11:15:11 Shutter LASER close
11:15:11 Received message from Camera: op=State serial=191777
11:15:11 GetSingleValue result=40  Value=cccccccc
11:15:11 SkyScan query
11:15:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:15:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:15:12 Parameters OK
11:15:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:15:12 Set A/D data flow result=40
11:15:12 Set A/D channel type result=40
11:15:12 Set A/D encoding result=40
11:15:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:15:12 Set channel filter=0.000000e+000  result=40
11:15:12 Config A/D  Result=40
11:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:15:12 Get A/D filter: -9.255963e+061  result=40
11:15:12 Get A/D value=-858993460  result=40
11:15:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:15:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:15:12 Parameters OK
11:15:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:15:12 Set A/D data flow result=40
11:15:12 Set A/D channel type result=40
11:15:12 Set A/D encoding result=40
11:15:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:15:12 Set channel filter=0.000000e+000  result=40
11:15:12 Config A/D  Result=40
11:15:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:15:12 Get A/D filter: -9.255963e+061  result=40
11:15:12 Get A/D value=-858993460  result=40
11:15:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:15:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:15:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:15:12 Aux=
11:15:12 Message to Camera, serial 191777 queued
11:15:49 Received message from Master: op=PointingHead serial=191790
11:15:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:15:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:15:49 Point started: ret=0
11:15:49 point_skyscan result=0
11:15:50 Check angles
11:15:50 SkyScan query
11:15:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.88<-13592  Statuses=0008 0009
11:15:50 Msec=0  True Az=112.995  Ze=-23.88  Az status=0008  Ze status=0009
11:15:50 Check angles
11:15:50 SkyScan query
11:15:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.655<-14977  Statuses=0008 0009
11:15:51 Msec=750  True Az=112.995  Ze=-44.655  Az status=0008  Ze status=0009
11:15:51 Check angles
11:15:51 SkyScan query
11:15:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.03<-16402  Statuses=0008 0009
11:15:52 Msec=1500  True Az=112.995  Ze=-66.03  Az status=0008  Ze status=0009
11:15:52 Check angles
11:15:52 SkyScan query
11:15:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.985<-17799  Statuses=0008 0009
11:15:53 Msec=2250  True Az=112.995  Ze=-86.985  Az status=0008  Ze status=0009
11:15:53 Check angles
11:15:53 SkyScan query
11:15:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.925<-19195  Statuses=0008 0009
11:15:53 Msec=3000  True Az=112.995  Ze=-107.925  Az status=0008  Ze status=0009
11:15:53 Check angles
11:15:53 SkyScan query
11:15:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.33<-20622  Statuses=0008 0009
11:15:54 Msec=3750  True Az=112.995  Ze=-129.33  Az status=0008  Ze status=0009
11:15:54 Check angles
11:15:54 SkyScan query
11:15:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.285<-22019  Statuses=0008 0009
11:15:55 Msec=4500  True Az=112.995  Ze=-150.285  Az status=0008  Ze status=0009
11:15:55 Check angles
11:15:55 SkyScan query
11:15:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.075<-23405  Statuses=0008 0009
11:15:56 Msec=5250  True Az=112.995  Ze=-171.075  Az status=0008  Ze status=0009
11:15:56 Check angles
11:15:56 SkyScan query
11:15:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:15:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:15:56 Message to Master queued w/err=0: serial=191790 error=0
11:16:01 Received message from Master: op=Filter serial=191791
11:16:01 Color wheel filter change from 0 to 0
11:16:01 FLIGetFilterPos err=0  currentPosition=0
11:16:01 FLIGetStepsRemaining err=0  RemainingSteps=0
11:16:01 Filter is already there-color wheel unchanged
11:16:01 Received message from Master: op=Shutter serial=191792
11:16:01 Shutter LASER open
11:16:02 Received message from Camera: op=State serial=191794
11:16:02 GetSingleValue result=40  Value=cccccccc
11:16:02 SkyScan query
11:16:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:16:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:16:02 Parameters OK
11:16:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:16:02 Set A/D data flow result=40
11:16:02 Set A/D channel type result=40
11:16:02 Set A/D encoding result=40
11:16:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:16:02 Set channel filter=0.000000e+000  result=40
11:16:02 Config A/D  Result=40
11:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:16:02 Get A/D filter: -9.255963e+061  result=40
11:16:02 Get A/D value=-858993460  result=40
11:16:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:16:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:16:02 Parameters OK
11:16:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:16:02 Set A/D data flow result=40
11:16:02 Set A/D channel type result=40
11:16:02 Set A/D encoding result=40
11:16:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:16:02 Set channel filter=0.000000e+000  result=40
11:16:02 Config A/D  Result=40
11:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:16:02 Get A/D filter: -9.255963e+061  result=40
11:16:02 Get A/D value=-858993460  result=40
11:16:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:16:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:16:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:16:02 Aux=
11:16:02 Message to Camera, serial 191794 queued
11:16:11 Received message from Master: op=Shutter serial=191804
11:16:11 Shutter LASER close
11:16:11 Received message from Master: op=PointingHead serial=191808
11:16:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:16:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:16:12 Point started: ret=0
11:16:12 point_skyscan result=0
11:16:12 Check angles
11:16:12 SkyScan query
11:16:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
11:16:13 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
11:16:13 Check angles
11:16:13 SkyScan query
11:16:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.32<-20088  Statuses=0008 0009
11:16:14 Msec=750  True Az=112.995  Ze=-121.32  Az status=0008  Ze status=0009
11:16:14 Check angles
11:16:14 SkyScan query
11:16:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.365<-18691  Statuses=0008 0009
11:16:14 Msec=1500  True Az=112.995  Ze=-100.365  Az status=0008  Ze status=0009
11:16:15 Check angles
11:16:15 SkyScan query
11:16:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.395<-17293  Statuses=0008 0009
11:16:15 Msec=2250  True Az=112.995  Ze=-79.395  Az status=0008  Ze status=0009
11:16:15 Check angles
11:16:15 SkyScan query
11:16:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.425<-15895  Statuses=0008 0009
11:16:16 Msec=3000  True Az=112.995  Ze=-58.425  Az status=0008  Ze status=0009
11:16:16 Check angles
11:16:16 SkyScan query
11:16:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.5<-14500  Statuses=0008 0009
11:16:17 Msec=3750  True Az=112.995  Ze=-37.5  Az status=0008  Ze status=0009
11:16:17 Check angles
11:16:17 SkyScan query
11:16:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.515<-13101  Statuses=0008 0009
11:16:17 Msec=4500  True Az=112.995  Ze=-16.515  Az status=0008  Ze status=0009
11:16:18 Check angles
11:16:18 SkyScan query
11:16:18 SkyScan query done: ret=0  az=112.995<-7533  ze=4.35<-11710  Statuses=0008 0009
11:16:18 Msec=5250  True Az=112.995  Ze=4.35  Az status=0008  Ze status=0009
11:16:18 Check angles
11:16:18 SkyScan query
11:16:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:16:19 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:16:19 Message to Master queued w/err=0: serial=191808 error=0
11:16:24 Received message from Master: op=Filter serial=191809
11:16:24 Color wheel filter change from 0 to 0
11:16:24 FLIGetFilterPos err=0  currentPosition=0
11:16:24 FLIGetStepsRemaining err=0  RemainingSteps=0
11:16:24 Filter is already there-color wheel unchanged
11:16:24 Received message from Master: op=Shutter serial=191810
11:16:24 Shutter LASER close
11:16:24 Received message from Camera: op=State serial=191812
11:16:24 GetSingleValue result=40  Value=cccccccc
11:16:24 SkyScan query
11:16:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:16:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:16:25 Parameters OK
11:16:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:16:25 Set A/D data flow result=40
11:16:25 Set A/D channel type result=40
11:16:25 Set A/D encoding result=40
11:16:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:16:25 Set channel filter=0.000000e+000  result=40
11:16:25 Config A/D  Result=40
11:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:16:25 Get A/D filter: -9.255963e+061  result=40
11:16:25 Get A/D value=-858993460  result=40
11:16:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:16:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:16:25 Parameters OK
11:16:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:16:25 Set A/D data flow result=40
11:16:25 Set A/D channel type result=40
11:16:25 Set A/D encoding result=40
11:16:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:16:25 Set channel filter=0.000000e+000  result=40
11:16:25 Config A/D  Result=40
11:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:16:25 Get A/D filter: -9.255963e+061  result=40
11:16:25 Get A/D value=-858993460  result=40
11:16:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:16:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:16:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:16:25 Aux=
11:16:25 Message to Camera, serial 191812 queued
11:17:02 Received message from Master: op=PointingHead serial=191825
11:17:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:17:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:17:02 Point started: ret=0
11:17:02 point_skyscan result=0
11:17:03 Check angles
11:17:03 SkyScan query
11:17:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:17:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:17:03 Message to Master queued w/err=0: serial=191825 error=0
11:17:08 Received message from Master: op=Filter serial=191826
11:17:08 Color wheel filter change from 0 to 0
11:17:08 FLIGetFilterPos err=0  currentPosition=0
11:17:08 FLIGetStepsRemaining err=0  RemainingSteps=0
11:17:08 Filter is already there-color wheel unchanged
11:17:09 Received message from Master: op=Shutter serial=191827
11:17:09 Shutter LASER close
11:17:09 Received message from Camera: op=State serial=191829
11:17:09 GetSingleValue result=40  Value=cccccccc
11:17:09 SkyScan query
11:17:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:17:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:17:09 Parameters OK
11:17:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:17:09 Set A/D data flow result=40
11:17:09 Set A/D channel type result=40
11:17:09 Set A/D encoding result=40
11:17:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:17:09 Set channel filter=0.000000e+000  result=40
11:17:09 Config A/D  Result=40
11:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:17:09 Get A/D filter: -9.255963e+061  result=40
11:17:09 Get A/D value=-858993460  result=40
11:17:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:17:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:17:09 Parameters OK
11:17:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:17:09 Set A/D data flow result=40
11:17:09 Set A/D channel type result=40
11:17:09 Set A/D encoding result=40
11:17:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:17:09 Set channel filter=0.000000e+000  result=40
11:17:09 Config A/D  Result=40
11:17:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:17:09 Get A/D filter: -9.255963e+061  result=40
11:17:09 Get A/D value=-858993460  result=40
11:17:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:17:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:17:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:17:09 Aux=
11:17:09 Message to Camera, serial 191829 queued
11:17:46 Received message from Master: op=PointingHead serial=191842
11:17:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:17:46 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:17:46 Point started: ret=0
11:17:46 point_skyscan result=0
11:17:47 Check angles
11:17:47 SkyScan query
11:17:48 SkyScan query done: ret=0  az=136.29<-9086  ze=-6.51<-12434  Statuses=0009 0008
11:17:48 Msec=0  True Az=136.29  Ze=-6.51  Az status=0009  Ze status=0008
11:17:48 Check angles
11:17:48 SkyScan query
11:17:48 SkyScan query done: ret=0  az=153.765<-10251  ze=-6.495<-12433  Statuses=0009 0008
11:17:48 Msec=750  True Az=153.765  Ze=-6.495  Az status=0009  Ze status=0008
11:17:49 Check angles
11:17:49 SkyScan query
11:17:49 SkyScan query done: ret=0  az=171.225<-11415  ze=-6.495<-12433  Statuses=0009 0008
11:17:49 Msec=1500  True Az=171.225  Ze=-6.495  Az status=0009  Ze status=0008
11:17:49 Check angles
11:17:49 SkyScan query
11:17:50 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:17:50 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:17:50 Message to Master queued w/err=0: serial=191842 error=0
11:17:55 Received message from Master: op=Filter serial=191843
11:17:55 Color wheel filter change from 0 to 0
11:17:55 FLIGetFilterPos err=0  currentPosition=0
11:17:55 FLIGetStepsRemaining err=0  RemainingSteps=0
11:17:55 Filter is already there-color wheel unchanged
11:17:55 Received message from Master: op=Shutter serial=191844
11:17:55 Shutter LASER close
11:17:55 Received message from Camera: op=State serial=191846
11:17:55 GetSingleValue result=40  Value=cccccccc
11:17:55 SkyScan query
11:17:56 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:17:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:17:56 Parameters OK
11:17:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:17:56 Set A/D data flow result=40
11:17:56 Set A/D channel type result=40
11:17:56 Set A/D encoding result=40
11:17:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:17:56 Set channel filter=0.000000e+000  result=40
11:17:56 Config A/D  Result=40
11:17:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:17:56 Get A/D filter: -9.255963e+061  result=40
11:17:56 Get A/D value=-858993460  result=40
11:17:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:17:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:17:56 Parameters OK
11:17:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:17:56 Set A/D data flow result=40
11:17:56 Set A/D channel type result=40
11:17:56 Set A/D encoding result=40
11:17:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:17:56 Set channel filter=0.000000e+000  result=40
11:17:56 Config A/D  Result=40
11:17:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:17:56 Get A/D filter: -9.255963e+061  result=40
11:17:56 Get A/D value=-858993460  result=40
11:17:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:17:56 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:17:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:17:56 Aux=
11:17:56 Message to Camera, serial 191846 queued
11:18:33 Received message from Master: op=PointingHead serial=191859
11:18:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:18:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:18:33 Point started: ret=0
11:18:33 point_skyscan result=0
11:18:34 Check angles
11:18:34 SkyScan query
11:18:34 SkyScan query done: ret=0  az=152.61<-10174  ze=6.51<-11566  Statuses=0009 0008
11:18:34 Msec=0  True Az=152.61  Ze=6.51  Az status=0009  Ze status=0008
11:18:34 Check angles
11:18:34 SkyScan query
11:18:35 SkyScan query done: ret=0  az=134.895<-8993  ze=6.495<-11567  Statuses=0009 0008
11:18:35 Msec=750  True Az=134.895  Ze=6.495  Az status=0009  Ze status=0008
11:18:35 Check angles
11:18:35 SkyScan query
11:18:36 SkyScan query done: ret=0  az=117.3<-7820  ze=6.495<-11567  Statuses=0009 0008
11:18:36 Msec=1500  True Az=117.3  Ze=6.495  Az status=0009  Ze status=0008
11:18:36 Check angles
11:18:36 SkyScan query
11:18:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:18:36 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:18:36 Message to Master queued w/err=0: serial=191859 error=0
11:18:41 Received message from Master: op=Filter serial=191860
11:18:41 Color wheel filter change from 0 to 0
11:18:41 FLIGetFilterPos err=0  currentPosition=0
11:18:41 FLIGetStepsRemaining err=0  RemainingSteps=0
11:18:41 Filter is already there-color wheel unchanged
11:18:42 Received message from Master: op=Shutter serial=191861
11:18:42 Shutter LASER close
11:18:42 Received message from Camera: op=State serial=191863
11:18:42 GetSingleValue result=40  Value=cccccccc
11:18:42 SkyScan query
11:18:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:18:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:18:42 Parameters OK
11:18:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:18:42 Set A/D data flow result=40
11:18:42 Set A/D channel type result=40
11:18:42 Set A/D encoding result=40
11:18:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:18:42 Set channel filter=0.000000e+000  result=40
11:18:42 Config A/D  Result=40
11:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:18:42 Get A/D filter: -9.255963e+061  result=40
11:18:42 Get A/D value=-858993460  result=40
11:18:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:18:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:18:42 Parameters OK
11:18:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:18:42 Set A/D data flow result=40
11:18:42 Set A/D channel type result=40
11:18:42 Set A/D encoding result=40
11:18:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:18:42 Set channel filter=0.000000e+000  result=40
11:18:42 Config A/D  Result=40
11:18:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:18:42 Get A/D filter: -9.255963e+061  result=40
11:18:42 Get A/D value=-858993460  result=40
11:18:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:18:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:18:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:18:42 Aux=
11:18:42 Message to Camera, serial 191863 queued
11:19:18 Received message from Master: op=PointingHead serial=191875
11:19:18 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:19:18 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:19:19 Point started: ret=0
11:19:19 point_skyscan result=0
11:19:19 Check angles
11:19:19 SkyScan query
11:19:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
11:19:20 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
11:19:20 Check angles
11:19:20 SkyScan query
11:19:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
11:19:21 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
11:19:21 Check angles
11:19:21 SkyScan query
11:19:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.055<-16337  Statuses=0008 0009
11:19:21 Msec=1500  True Az=112.995  Ze=-65.055  Az status=0008  Ze status=0009
11:19:22 Check angles
11:19:22 SkyScan query
11:19:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.01<-17734  Statuses=0008 0009
11:19:22 Msec=2250  True Az=112.995  Ze=-86.01  Az status=0008  Ze status=0009
11:19:22 Check angles
11:19:22 SkyScan query
11:19:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.385<-19159  Statuses=0008 0009
11:19:23 Msec=3000  True Az=112.995  Ze=-107.385  Az status=0008  Ze status=0009
11:19:23 Check angles
11:19:23 SkyScan query
11:19:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.34<-20556  Statuses=0008 0009
11:19:24 Msec=3750  True Az=112.995  Ze=-128.34  Az status=0008  Ze status=0009
11:19:24 Check angles
11:19:24 SkyScan query
11:19:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.31<-21954  Statuses=0008 0009
11:19:24 Msec=4500  True Az=112.995  Ze=-149.31  Az status=0008  Ze status=0009
11:19:25 Check angles
11:19:25 SkyScan query
11:19:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.64<-23376  Statuses=0008 0009
11:19:25 Msec=5250  True Az=112.995  Ze=-170.64  Az status=0008  Ze status=0009
11:19:25 Check angles
11:19:25 SkyScan query
11:19:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:19:26 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:19:26 Message to Master queued w/err=0: serial=191875 error=0
11:19:31 Received message from Master: op=Filter serial=191876
11:19:31 Color wheel filter change from 0 to 0
11:19:31 FLIGetFilterPos err=0  currentPosition=0
11:19:31 FLIGetStepsRemaining err=0  RemainingSteps=0
11:19:31 Filter is already there-color wheel unchanged
11:19:31 Received message from Master: op=Shutter serial=191877
11:19:31 Shutter LASER open
11:19:31 Received message from Camera: op=State serial=191879
11:19:31 GetSingleValue result=40  Value=cccccccc
11:19:31 SkyScan query
11:19:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:19:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:19:32 Parameters OK
11:19:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:19:32 Set A/D data flow result=40
11:19:32 Set A/D channel type result=40
11:19:32 Set A/D encoding result=40
11:19:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:19:32 Set channel filter=0.000000e+000  result=40
11:19:32 Config A/D  Result=40
11:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:19:32 Get A/D filter: -9.255963e+061  result=40
11:19:32 Get A/D value=-858993460  result=40
11:19:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:19:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:19:32 Parameters OK
11:19:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:19:32 Set A/D data flow result=40
11:19:32 Set A/D channel type result=40
11:19:32 Set A/D encoding result=40
11:19:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:19:32 Set channel filter=0.000000e+000  result=40
11:19:32 Config A/D  Result=40
11:19:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:19:32 Get A/D filter: -9.255963e+061  result=40
11:19:32 Get A/D value=-858993460  result=40
11:19:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:19:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:19:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:19:32 Aux=
11:19:32 Message to Camera, serial 191879 queued
11:19:40 Received message from Master: op=Shutter serial=191889
11:19:40 Shutter LASER close
11:19:41 Received message from Master: op=PointingHead serial=191893
11:19:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:19:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:19:41 Point started: ret=0
11:19:41 point_skyscan result=0
11:19:42 Check angles
11:19:42 SkyScan query
11:19:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.77<-21518  Statuses=0008 0009
11:19:42 Msec=0  True Az=112.995  Ze=-142.77  Az status=0008  Ze status=0009
11:19:43 Check angles
11:19:43 SkyScan query
11:19:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.38<-20092  Statuses=0008 0009
11:19:43 Msec=750  True Az=112.995  Ze=-121.38  Az status=0008  Ze status=0009
11:19:43 Check angles
11:19:43 SkyScan query
11:19:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.425<-18695  Statuses=0008 0009
11:19:44 Msec=1500  True Az=112.995  Ze=-100.425  Az status=0008  Ze status=0009
11:19:44 Check angles
11:19:44 SkyScan query
11:19:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.455<-17297  Statuses=0008 0009
11:19:45 Msec=2250  True Az=112.995  Ze=-79.455  Az status=0008  Ze status=0009
11:19:45 Check angles
11:19:45 SkyScan query
11:19:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
11:19:45 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
11:19:46 Check angles
11:19:46 SkyScan query
11:19:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
11:19:46 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
11:19:46 Check angles
11:19:46 SkyScan query
11:19:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
11:19:47 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
11:19:47 Check angles
11:19:47 SkyScan query
11:19:48 SkyScan query done: ret=0  az=112.995<-7533  ze=4.305<-11713  Statuses=0008 0009
11:19:48 Msec=5250  True Az=112.995  Ze=4.305  Az status=0008  Ze status=0009
11:19:48 Check angles
11:19:48 SkyScan query
11:19:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:19:48 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:19:48 Message to Master queued w/err=0: serial=191893 error=0
11:19:53 Received message from Master: op=Filter serial=191894
11:19:53 Color wheel filter change from 0 to 0
11:19:53 FLIGetFilterPos err=0  currentPosition=0
11:19:53 FLIGetStepsRemaining err=0  RemainingSteps=0
11:19:53 Filter is already there-color wheel unchanged
11:19:54 Received message from Master: op=Shutter serial=191895
11:19:54 Shutter LASER close
11:19:54 Received message from Camera: op=State serial=191897
11:19:54 GetSingleValue result=40  Value=cccccccc
11:19:54 SkyScan query
11:19:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:19:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:19:54 Parameters OK
11:19:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:19:54 Set A/D data flow result=40
11:19:54 Set A/D channel type result=40
11:19:54 Set A/D encoding result=40
11:19:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:19:54 Set channel filter=0.000000e+000  result=40
11:19:54 Config A/D  Result=40
11:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:19:54 Get A/D filter: -9.255963e+061  result=40
11:19:54 Get A/D value=-858993460  result=40
11:19:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:19:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:19:54 Parameters OK
11:19:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:19:54 Set A/D data flow result=40
11:19:54 Set A/D channel type result=40
11:19:54 Set A/D encoding result=40
11:19:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:19:54 Set channel filter=0.000000e+000  result=40
11:19:54 Config A/D  Result=40
11:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:19:54 Get A/D filter: -9.255963e+061  result=40
11:19:54 Get A/D value=-858993460  result=40
11:19:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:19:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:19:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:19:54 Aux=
11:19:54 Message to Camera, serial 191897 queued
11:20:31 Received message from Master: op=PointingHead serial=191910
11:20:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:20:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:20:31 Point started: ret=0
11:20:31 point_skyscan result=0
11:20:32 Check angles
11:20:32 SkyScan query
11:20:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:20:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:20:33 Message to Master queued w/err=0: serial=191910 error=0
11:20:38 Received message from Master: op=Filter serial=191911
11:20:38 Color wheel filter change from 0 to 0
11:20:38 FLIGetFilterPos err=0  currentPosition=0
11:20:38 FLIGetStepsRemaining err=0  RemainingSteps=0
11:20:38 Filter is already there-color wheel unchanged
11:20:38 Received message from Master: op=Shutter serial=191912
11:20:38 Shutter LASER close
11:20:38 Received message from Camera: op=State serial=191914
11:20:38 GetSingleValue result=40  Value=cccccccc
11:20:38 SkyScan query
11:20:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:20:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:20:39 Parameters OK
11:20:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:20:39 Set A/D data flow result=40
11:20:39 Set A/D channel type result=40
11:20:39 Set A/D encoding result=40
11:20:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:20:39 Set channel filter=0.000000e+000  result=40
11:20:39 Config A/D  Result=40
11:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:20:39 Get A/D filter: -9.255963e+061  result=40
11:20:39 Get A/D value=-858993460  result=40
11:20:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:20:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:20:39 Parameters OK
11:20:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:20:39 Set A/D data flow result=40
11:20:39 Set A/D channel type result=40
11:20:39 Set A/D encoding result=40
11:20:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:20:39 Set channel filter=0.000000e+000  result=40
11:20:39 Config A/D  Result=40
11:20:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:20:39 Get A/D filter: -9.255963e+061  result=40
11:20:39 Get A/D value=-858993460  result=40
11:20:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:20:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:20:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:20:39 Aux=
11:20:39 Message to Camera, serial 191914 queued
11:21:15 Received message from Master: op=PointingHead serial=191927
11:21:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:21:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:21:16 Point started: ret=0
11:21:16 point_skyscan result=0
11:21:17 Check angles
11:21:17 SkyScan query
11:21:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:21:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:21:17 Message to Master queued w/err=0: serial=191927 error=0
11:21:22 Received message from Master: op=Filter serial=191928
11:21:22 Color wheel filter change from 0 to 0
11:21:22 FLIGetFilterPos err=0  currentPosition=0
11:21:22 FLIGetStepsRemaining err=0  RemainingSteps=0
11:21:22 Filter is already there-color wheel unchanged
11:21:22 Received message from Master: op=Shutter serial=191929
11:21:22 Shutter LASER close
11:21:22 Received message from Camera: op=State serial=191931
11:21:22 GetSingleValue result=40  Value=cccccccc
11:21:22 SkyScan query
11:21:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:21:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:21:23 Parameters OK
11:21:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:21:23 Set A/D data flow result=40
11:21:23 Set A/D channel type result=40
11:21:23 Set A/D encoding result=40
11:21:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:21:23 Set channel filter=0.000000e+000  result=40
11:21:23 Config A/D  Result=40
11:21:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:21:23 Get A/D filter: -9.255963e+061  result=40
11:21:23 Get A/D value=-858993460  result=40
11:21:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:21:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:21:23 Parameters OK
11:21:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:21:23 Set A/D data flow result=40
11:21:23 Set A/D channel type result=40
11:21:23 Set A/D encoding result=40
11:21:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:21:23 Set channel filter=0.000000e+000  result=40
11:21:23 Config A/D  Result=40
11:21:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:21:23 Get A/D filter: -9.255963e+061  result=40
11:21:23 Get A/D value=-858993460  result=40
11:21:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:21:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:21:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:21:23 Aux=
11:21:23 Message to Camera, serial 191931 queued
11:22:00 Received message from Master: op=PointingHead serial=191944
11:22:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:22:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:22:00 Point started: ret=0
11:22:00 point_skyscan result=0
11:22:01 Check angles
11:22:01 SkyScan query
11:22:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:22:01 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:22:01 Message to Master queued w/err=0: serial=191944 error=0
11:22:06 Received message from Master: op=Filter serial=191945
11:22:06 Color wheel filter change from 0 to 0
11:22:06 FLIGetFilterPos err=0  currentPosition=0
11:22:06 FLIGetStepsRemaining err=0  RemainingSteps=0
11:22:06 Filter is already there-color wheel unchanged
11:22:07 Received message from Master: op=Shutter serial=191946
11:22:07 Shutter LASER close
11:22:07 Received message from Camera: op=State serial=191948
11:22:07 GetSingleValue result=40  Value=cccccccc
11:22:07 SkyScan query
11:22:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:22:07 Parameters OK
11:22:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:22:07 Set A/D data flow result=40
11:22:07 Set A/D channel type result=40
11:22:07 Set A/D encoding result=40
11:22:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:22:07 Set channel filter=0.000000e+000  result=40
11:22:07 Config A/D  Result=40
11:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:22:07 Get A/D filter: -9.255963e+061  result=40
11:22:07 Get A/D value=-858993460  result=40
11:22:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:22:07 Parameters OK
11:22:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:22:07 Set A/D data flow result=40
11:22:07 Set A/D channel type result=40
11:22:07 Set A/D encoding result=40
11:22:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:22:07 Set channel filter=0.000000e+000  result=40
11:22:07 Config A/D  Result=40
11:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:22:07 Get A/D filter: -9.255963e+061  result=40
11:22:07 Get A/D value=-858993460  result=40
11:22:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:22:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:22:07 Aux=
11:22:07 Message to Camera, serial 191948 queued
11:22:44 Received message from Master: op=PointingHead serial=191961
11:22:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:22:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:22:44 Point started: ret=0
11:22:44 point_skyscan result=0
11:22:45 Check angles
11:22:45 SkyScan query
11:22:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.565<-13571  Statuses=0008 0009
11:22:46 Msec=0  True Az=112.995  Ze=-23.565  Az status=0008  Ze status=0009
11:22:46 Check angles
11:22:46 SkyScan query
11:22:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.97<-14998  Statuses=0008 0009
11:22:47 Msec=750  True Az=112.995  Ze=-44.97  Az status=0008  Ze status=0009
11:22:47 Check angles
11:22:47 SkyScan query
11:22:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-66<-16400  Statuses=0008 0009
11:22:47 Msec=1500  True Az=112.995  Ze=-66  Az status=0008  Ze status=0009
11:22:47 Check angles
11:22:47 SkyScan query
11:22:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
11:22:48 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
11:22:48 Check angles
11:22:48 SkyScan query
11:22:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.805<-19187  Statuses=0008 0009
11:22:49 Msec=3000  True Az=112.995  Ze=-107.805  Az status=0008  Ze status=0009
11:22:49 Check angles
11:22:49 SkyScan query
11:22:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.76<-20584  Statuses=0008 0009
11:22:50 Msec=3750  True Az=112.995  Ze=-128.76  Az status=0008  Ze status=0009
11:22:50 Check angles
11:22:50 SkyScan query
11:22:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.715<-21981  Statuses=0008 0009
11:22:50 Msec=4500  True Az=112.995  Ze=-149.715  Az status=0008  Ze status=0009
11:22:50 Check angles
11:22:50 SkyScan query
11:22:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.64<-23376  Statuses=0008 0009
11:22:51 Msec=5250  True Az=112.995  Ze=-170.64  Az status=0008  Ze status=0009
11:22:51 Check angles
11:22:51 SkyScan query
11:22:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:22:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:22:52 Message to Master queued w/err=0: serial=191961 error=0
11:22:57 Received message from Master: op=Filter serial=191962
11:22:57 Color wheel filter change from 0 to 0
11:22:57 FLIGetFilterPos err=0  currentPosition=0
11:22:57 FLIGetStepsRemaining err=0  RemainingSteps=0
11:22:57 Filter is already there-color wheel unchanged
11:22:57 Received message from Master: op=Shutter serial=191963
11:22:57 Shutter LASER open
11:22:57 Received message from Camera: op=State serial=191965
11:22:57 GetSingleValue result=40  Value=cccccccc
11:22:57 SkyScan query
11:22:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:22:58 Parameters OK
11:22:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:22:58 Set A/D data flow result=40
11:22:58 Set A/D channel type result=40
11:22:58 Set A/D encoding result=40
11:22:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:22:58 Set channel filter=0.000000e+000  result=40
11:22:58 Config A/D  Result=40
11:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:22:58 Get A/D filter: -9.255963e+061  result=40
11:22:58 Get A/D value=-858993460  result=40
11:22:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:22:58 Parameters OK
11:22:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:22:58 Set A/D data flow result=40
11:22:58 Set A/D channel type result=40
11:22:58 Set A/D encoding result=40
11:22:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:22:58 Set channel filter=0.000000e+000  result=40
11:22:58 Config A/D  Result=40
11:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:22:58 Get A/D filter: -9.255963e+061  result=40
11:22:58 Get A/D value=-858993460  result=40
11:22:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:22:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:22:58 Aux=
11:22:58 Message to Camera, serial 191965 queued
11:23:06 Received message from Master: op=Shutter serial=191975
11:23:06 Shutter LASER close
11:23:07 Received message from Master: op=PointingHead serial=191979
11:23:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:23:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:23:07 Point started: ret=0
11:23:07 point_skyscan result=0
11:23:08 Check angles
11:23:08 SkyScan query
11:23:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.8<-21520  Statuses=0008 0009
11:23:08 Msec=0  True Az=112.995  Ze=-142.8  Az status=0008  Ze status=0009
11:23:09 Check angles
11:23:09 SkyScan query
11:23:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.83<-20122  Statuses=0008 0009
11:23:09 Msec=750  True Az=112.995  Ze=-121.83  Az status=0008  Ze status=0009
11:23:09 Check angles
11:23:09 SkyScan query
11:23:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.905<-18727  Statuses=0008 0009
11:23:10 Msec=1500  True Az=112.995  Ze=-100.905  Az status=0008  Ze status=0009
11:23:10 Check angles
11:23:10 SkyScan query
11:23:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.5<-17300  Statuses=0008 0009
11:23:11 Msec=2250  True Az=112.995  Ze=-79.5  Az status=0008  Ze status=0009
11:23:11 Check angles
11:23:11 SkyScan query
11:23:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.545<-15903  Statuses=0008 0009
11:23:11 Msec=3000  True Az=112.995  Ze=-58.545  Az status=0008  Ze status=0009
11:23:12 Check angles
11:23:12 SkyScan query
11:23:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.605<-14507  Statuses=0008 0009
11:23:12 Msec=3750  True Az=112.995  Ze=-37.605  Az status=0008  Ze status=0009
11:23:12 Check angles
11:23:12 SkyScan query
11:23:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.62<-13108  Statuses=0008 0009
11:23:13 Msec=4500  True Az=112.995  Ze=-16.62  Az status=0008  Ze status=0009
11:23:13 Check angles
11:23:13 SkyScan query
11:23:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.275<-11715  Statuses=0008 0009
11:23:14 Msec=5250  True Az=112.995  Ze=4.275  Az status=0008  Ze status=0009
11:23:14 Check angles
11:23:14 SkyScan query
11:23:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:23:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:23:14 Message to Master queued w/err=0: serial=191979 error=0
11:23:19 Received message from Master: op=Filter serial=191980
11:23:19 Color wheel filter change from 0 to 0
11:23:19 FLIGetFilterPos err=0  currentPosition=0
11:23:19 FLIGetStepsRemaining err=0  RemainingSteps=0
11:23:19 Filter is already there-color wheel unchanged
11:23:20 Received message from Master: op=Shutter serial=191981
11:23:20 Shutter LASER close
11:23:20 Received message from Camera: op=State serial=191983
11:23:20 GetSingleValue result=40  Value=cccccccc
11:23:20 SkyScan query
11:23:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:23:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:23:20 Parameters OK
11:23:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:23:20 Set A/D data flow result=40
11:23:20 Set A/D channel type result=40
11:23:20 Set A/D encoding result=40
11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:23:20 Set channel filter=0.000000e+000  result=40
11:23:20 Config A/D  Result=40
11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:23:20 Get A/D filter: -9.255963e+061  result=40
11:23:20 Get A/D value=-858993460  result=40
11:23:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:23:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:23:20 Parameters OK
11:23:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:23:20 Set A/D data flow result=40
11:23:20 Set A/D channel type result=40
11:23:20 Set A/D encoding result=40
11:23:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:23:20 Set channel filter=0.000000e+000  result=40
11:23:20 Config A/D  Result=40
11:23:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:23:20 Get A/D filter: -9.255963e+061  result=40
11:23:20 Get A/D value=-858993460  result=40
11:23:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:23:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:23:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:23:20 Aux=
11:23:20 Message to Camera, serial 191983 queued
[UTC 2019-3-9  11:23:48]
11:23:57 Received message from Master: op=PointingHead serial=191996
11:23:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:23:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:23:58 Point started: ret=0
11:23:58 point_skyscan result=0
11:23:58 Check angles
11:23:58 SkyScan query
11:23:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:23:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:23:59 Message to Master queued w/err=0: serial=191996 error=0
11:24:04 Received message from Master: op=Filter serial=191997
11:24:04 Color wheel filter change from 0 to 0
11:24:04 FLIGetFilterPos err=0  currentPosition=0
11:24:04 FLIGetStepsRemaining err=0  RemainingSteps=0
11:24:04 Filter is already there-color wheel unchanged
11:24:04 Received message from Master: op=Shutter serial=191998
11:24:04 Shutter LASER close
11:24:04 Received message from Camera: op=State serial=192000
11:24:04 GetSingleValue result=40  Value=cccccccc
11:24:04 SkyScan query
11:24:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:24:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:24:05 Parameters OK
11:24:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:24:05 Set A/D data flow result=40
11:24:05 Set A/D channel type result=40
11:24:05 Set A/D encoding result=40
11:24:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:24:05 Set channel filter=0.000000e+000  result=40
11:24:05 Config A/D  Result=40
11:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:24:05 Get A/D filter: -9.255963e+061  result=40
11:24:05 Get A/D value=-858993460  result=40
11:24:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:24:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:24:05 Parameters OK
11:24:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:24:05 Set A/D data flow result=40
11:24:05 Set A/D channel type result=40
11:24:05 Set A/D encoding result=40
11:24:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:24:05 Set channel filter=0.000000e+000  result=40
11:24:05 Config A/D  Result=40
11:24:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:24:05 Get A/D filter: -9.255963e+061  result=40
11:24:05 Get A/D value=-858993460  result=40
11:24:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:24:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:24:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:24:05 Aux=
11:24:05 Message to Camera, serial 192000 queued
11:24:42 Received message from Master: op=PointingHead serial=192013
11:24:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:24:42 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:24:42 Point started: ret=0
11:24:42 point_skyscan result=0
11:24:43 Check angles
11:24:43 SkyScan query
11:24:43 SkyScan query done: ret=0  az=136.17<-9078  ze=-6.51<-12434  Statuses=0009 0008
11:24:43 Msec=0  True Az=136.17  Ze=-6.51  Az status=0009  Ze status=0008
11:24:43 Check angles
11:24:43 SkyScan query
11:24:44 SkyScan query done: ret=0  az=153.63<-10242  ze=-6.495<-12433  Statuses=0009 0008
11:24:44 Msec=750  True Az=153.63  Ze=-6.495  Az status=0009  Ze status=0008
11:24:44 Check angles
11:24:44 SkyScan query
11:24:45 SkyScan query done: ret=0  az=171.435<-11429  ze=-6.495<-12433  Statuses=0009 0008
11:24:45 Msec=1500  True Az=171.435  Ze=-6.495  Az status=0009  Ze status=0008
11:24:45 Check angles
11:24:45 SkyScan query
11:24:45 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:24:45 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:24:45 Message to Master queued w/err=0: serial=192013 error=0
11:24:50 Received message from Master: op=Filter serial=192014
11:24:50 Color wheel filter change from 0 to 0
11:24:50 FLIGetFilterPos err=0  currentPosition=0
11:24:50 FLIGetStepsRemaining err=0  RemainingSteps=0
11:24:50 Filter is already there-color wheel unchanged
11:24:51 Received message from Master: op=Shutter serial=192015
11:24:51 Shutter LASER close
11:24:51 Received message from Camera: op=State serial=192017
11:24:51 GetSingleValue result=40  Value=cccccccc
11:24:51 SkyScan query
11:24:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:24:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:24:51 Parameters OK
11:24:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:24:51 Set A/D data flow result=40
11:24:51 Set A/D channel type result=40
11:24:51 Set A/D encoding result=40
11:24:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:24:51 Set channel filter=0.000000e+000  result=40
11:24:51 Config A/D  Result=40
11:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:24:51 Get A/D filter: -9.255963e+061  result=40
11:24:51 Get A/D value=-858993460  result=40
11:24:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:24:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:24:51 Parameters OK
11:24:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:24:51 Set A/D data flow result=40
11:24:51 Set A/D channel type result=40
11:24:51 Set A/D encoding result=40
11:24:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:24:51 Set channel filter=0.000000e+000  result=40
11:24:51 Config A/D  Result=40
11:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:24:51 Get A/D filter: -9.255963e+061  result=40
11:24:51 Get A/D value=-858993460  result=40
11:24:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:24:51 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:24:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:24:51 Aux=
11:24:51 Message to Camera, serial 192017 queued
11:25:28 Received message from Master: op=PointingHead serial=192030
11:25:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:25:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:25:28 Point started: ret=0
11:25:28 point_skyscan result=0
11:25:29 Check angles
11:25:29 SkyScan query
11:25:30 SkyScan query done: ret=0  az=153.225<-10215  ze=6.51<-11566  Statuses=0009 0008
11:25:30 Msec=0  True Az=153.225  Ze=6.51  Az status=0009  Ze status=0008
11:25:30 Check angles
11:25:30 SkyScan query
11:25:31 SkyScan query done: ret=0  az=135.78<-9052  ze=6.495<-11567  Statuses=0009 0008
11:25:31 Msec=750  True Az=135.78  Ze=6.495  Az status=0009  Ze status=0008
11:25:31 Check angles
11:25:31 SkyScan query
11:25:31 SkyScan query done: ret=0  az=118.275<-7885  ze=6.495<-11567  Statuses=0009 0008
11:25:31 Msec=1500  True Az=118.275  Ze=6.495  Az status=0009  Ze status=0008
11:25:31 Check angles
11:25:31 SkyScan query
11:25:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:25:32 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:25:32 Message to Master queued w/err=0: serial=192030 error=0
11:25:37 Received message from Master: op=Filter serial=192031
11:25:37 Color wheel filter change from 0 to 0
11:25:37 FLIGetFilterPos err=0  currentPosition=0
11:25:37 FLIGetStepsRemaining err=0  RemainingSteps=0
11:25:37 Filter is already there-color wheel unchanged
11:25:37 Received message from Master: op=Shutter serial=192032
11:25:37 Shutter LASER close
11:25:37 Received message from Camera: op=State serial=192034
11:25:37 GetSingleValue result=40  Value=cccccccc
11:25:37 SkyScan query
11:25:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:25:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:25:38 Parameters OK
11:25:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:25:38 Set A/D data flow result=40
11:25:38 Set A/D channel type result=40
11:25:38 Set A/D encoding result=40
11:25:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:25:38 Set channel filter=0.000000e+000  result=40
11:25:38 Config A/D  Result=40
11:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:25:38 Get A/D filter: -9.255963e+061  result=40
11:25:38 Get A/D value=-858993460  result=40
11:25:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:25:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:25:38 Parameters OK
11:25:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:25:38 Set A/D data flow result=40
11:25:38 Set A/D channel type result=40
11:25:38 Set A/D encoding result=40
11:25:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:25:38 Set channel filter=0.000000e+000  result=40
11:25:38 Config A/D  Result=40
11:25:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:25:38 Get A/D filter: -9.255963e+061  result=40
11:25:38 Get A/D value=-858993460  result=40
11:25:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:25:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:25:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:25:38 Aux=
11:25:38 Message to Camera, serial 192034 queued
11:26:15 Received message from Master: op=PointingHead serial=192047
11:26:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:26:15 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:26:15 Point started: ret=0
11:26:15 point_skyscan result=0
11:26:16 Check angles
11:26:16 SkyScan query
11:26:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
11:26:16 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
11:26:16 Check angles
11:26:16 SkyScan query
11:26:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.76<-14984  Statuses=0008 0009
11:26:17 Msec=750  True Az=112.995  Ze=-44.76  Az status=0008  Ze status=0009
11:26:17 Check angles
11:26:17 SkyScan query
11:26:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.7<-16380  Statuses=0008 0009
11:26:18 Msec=1500  True Az=112.995  Ze=-65.7  Az status=0008  Ze status=0009
11:26:18 Check angles
11:26:18 SkyScan query
11:26:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.655<-17777  Statuses=0008 0009
11:26:19 Msec=2250  True Az=112.995  Ze=-86.655  Az status=0008  Ze status=0009
11:26:19 Check angles
11:26:19 SkyScan query
11:26:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.61<-19174  Statuses=0008 0009
11:26:19 Msec=3000  True Az=112.995  Ze=-107.61  Az status=0008  Ze status=0009
11:26:19 Check angles
11:26:19 SkyScan query
11:26:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.55<-20570  Statuses=0008 0009
11:26:20 Msec=3750  True Az=112.995  Ze=-128.55  Az status=0008  Ze status=0009
11:26:20 Check angles
11:26:20 SkyScan query
11:26:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.505<-21967  Statuses=0008 0009
11:26:21 Msec=4500  True Az=112.995  Ze=-149.505  Az status=0008  Ze status=0009
11:26:21 Check angles
11:26:21 SkyScan query
11:26:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.445<-23363  Statuses=0008 0009
11:26:22 Msec=5250  True Az=112.995  Ze=-170.445  Az status=0008  Ze status=0009
11:26:22 Check angles
11:26:22 SkyScan query
11:26:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:26:22 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:26:22 Message to Master queued w/err=0: serial=192047 error=0
11:26:27 Received message from Master: op=Filter serial=192048
11:26:27 Color wheel filter change from 0 to 0
11:26:27 FLIGetFilterPos err=0  currentPosition=0
11:26:27 FLIGetStepsRemaining err=0  RemainingSteps=0
11:26:27 Filter is already there-color wheel unchanged
11:26:27 Received message from Master: op=Shutter serial=192049
11:26:27 Shutter LASER open
11:26:28 Received message from Camera: op=State serial=192051
11:26:28 GetSingleValue result=40  Value=cccccccc
11:26:28 SkyScan query
11:26:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:26:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:26:28 Parameters OK
11:26:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:26:28 Set A/D data flow result=40
11:26:28 Set A/D channel type result=40
11:26:28 Set A/D encoding result=40
11:26:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:26:28 Set channel filter=0.000000e+000  result=40
11:26:28 Config A/D  Result=40
11:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:26:28 Get A/D filter: -9.255963e+061  result=40
11:26:28 Get A/D value=-858993460  result=40
11:26:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:26:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:26:28 Parameters OK
11:26:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:26:28 Set A/D data flow result=40
11:26:28 Set A/D channel type result=40
11:26:28 Set A/D encoding result=40
11:26:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:26:28 Set channel filter=0.000000e+000  result=40
11:26:28 Config A/D  Result=40
11:26:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:26:28 Get A/D filter: -9.255963e+061  result=40
11:26:28 Get A/D value=-858993460  result=40
11:26:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:26:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:26:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:26:28 Aux=
11:26:28 Message to Camera, serial 192051 queued
11:26:37 Received message from Master: op=Shutter serial=192061
11:26:37 Shutter LASER close
11:26:37 Received message from Master: op=PointingHead serial=192065
11:26:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:26:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:26:37 Point started: ret=0
11:26:37 point_skyscan result=0
11:26:38 Check angles
11:26:38 SkyScan query
11:26:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.34<-21556  Statuses=0008 0009
11:26:39 Msec=0  True Az=112.995  Ze=-143.34  Az status=0008  Ze status=0009
11:26:39 Check angles
11:26:39 SkyScan query
11:26:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.935<-20129  Statuses=0008 0009
11:26:39 Msec=750  True Az=112.995  Ze=-121.935  Az status=0008  Ze status=0009
11:26:40 Check angles
11:26:40 SkyScan query
11:26:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.47<-18698  Statuses=0008 0009
11:26:40 Msec=1500  True Az=112.995  Ze=-100.47  Az status=0008  Ze status=0009
11:26:40 Check angles
11:26:40 SkyScan query
11:26:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.605<-17307  Statuses=0008 0009
11:26:41 Msec=2250  True Az=112.995  Ze=-79.605  Az status=0008  Ze status=0009
11:26:41 Check angles
11:26:41 SkyScan query
11:26:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.65<-15910  Statuses=0008 0009
11:26:42 Msec=3000  True Az=112.995  Ze=-58.65  Az status=0008  Ze status=0009
11:26:42 Check angles
11:26:42 SkyScan query
11:26:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.725<-14515  Statuses=0008 0009
11:26:43 Msec=3750  True Az=112.995  Ze=-37.725  Az status=0008  Ze status=0009
11:26:43 Check angles
11:26:43 SkyScan query
11:26:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.74<-13116  Statuses=0008 0009
11:26:43 Msec=4500  True Az=112.995  Ze=-16.74  Az status=0008  Ze status=0009
11:26:43 Check angles
11:26:43 SkyScan query
11:26:44 SkyScan query done: ret=0  az=112.995<-7533  ze=4.17<-11722  Statuses=0008 0009
11:26:44 Msec=5250  True Az=112.995  Ze=4.17  Az status=0008  Ze status=0009
11:26:44 Check angles
11:26:44 SkyScan query
11:26:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:26:45 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:26:45 Message to Master queued w/err=0: serial=192065 error=0
11:26:50 Received message from Master: op=Filter serial=192066
11:26:50 Color wheel filter change from 0 to 0
11:26:50 FLIGetFilterPos err=0  currentPosition=0
11:26:50 FLIGetStepsRemaining err=0  RemainingSteps=0
11:26:50 Filter is already there-color wheel unchanged
11:26:50 Received message from Master: op=Shutter serial=192067
11:26:50 Shutter LASER close
11:26:50 Received message from Camera: op=State serial=192069
11:26:50 GetSingleValue result=40  Value=cccccccc
11:26:50 SkyScan query
11:26:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:26:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:26:51 Parameters OK
11:26:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:26:51 Set A/D data flow result=40
11:26:51 Set A/D channel type result=40
11:26:51 Set A/D encoding result=40
11:26:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:26:51 Set channel filter=0.000000e+000  result=40
11:26:51 Config A/D  Result=40
11:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:26:51 Get A/D filter: -9.255963e+061  result=40
11:26:51 Get A/D value=-858993460  result=40
11:26:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:26:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:26:51 Parameters OK
11:26:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:26:51 Set A/D data flow result=40
11:26:51 Set A/D channel type result=40
11:26:51 Set A/D encoding result=40
11:26:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:26:51 Set channel filter=0.000000e+000  result=40
11:26:51 Config A/D  Result=40
11:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:26:51 Get A/D filter: -9.255963e+061  result=40
11:26:51 Get A/D value=-858993460  result=40
11:26:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:26:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:26:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:26:51 Aux=
11:26:51 Message to Camera, serial 192069 queued
11:27:28 Received message from Master: op=PointingHead serial=192082
11:27:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:27:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:27:28 Point started: ret=0
11:27:28 point_skyscan result=0
11:27:29 Check angles
11:27:29 SkyScan query
11:27:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:27:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:27:29 Message to Master queued w/err=0: serial=192082 error=0
11:27:34 Received message from Master: op=Filter serial=192083
11:27:34 Color wheel filter change from 0 to 0
11:27:34 FLIGetFilterPos err=0  currentPosition=0
11:27:34 FLIGetStepsRemaining err=0  RemainingSteps=0
11:27:34 Filter is already there-color wheel unchanged
11:27:34 Received message from Master: op=Shutter serial=192084
11:27:34 Shutter LASER close
11:27:34 Received message from Camera: op=State serial=192086
11:27:34 GetSingleValue result=40  Value=cccccccc
11:27:34 SkyScan query
11:27:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:27:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:27:35 Parameters OK
11:27:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:27:35 Set A/D data flow result=40
11:27:35 Set A/D channel type result=40
11:27:35 Set A/D encoding result=40
11:27:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:27:35 Set channel filter=0.000000e+000  result=40
11:27:35 Config A/D  Result=40
11:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:27:35 Get A/D filter: -9.255963e+061  result=40
11:27:35 Get A/D value=-858993460  result=40
11:27:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:27:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:27:35 Parameters OK
11:27:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:27:35 Set A/D data flow result=40
11:27:35 Set A/D channel type result=40
11:27:35 Set A/D encoding result=40
11:27:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:27:35 Set channel filter=0.000000e+000  result=40
11:27:35 Config A/D  Result=40
11:27:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:27:35 Get A/D filter: -9.255963e+061  result=40
11:27:35 Get A/D value=-858993460  result=40
11:27:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:27:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:27:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:27:35 Aux=
11:27:35 Message to Camera, serial 192086 queued
11:28:12 Received message from Master: op=PointingHead serial=192099
11:28:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:28:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:28:12 Point started: ret=0
11:28:12 point_skyscan result=0
11:28:13 Check angles
11:28:13 SkyScan query
11:28:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:28:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:28:13 Message to Master queued w/err=0: serial=192099 error=0
11:28:18 Received message from Master: op=Filter serial=192100
11:28:18 Color wheel filter change from 0 to 0
11:28:18 FLIGetFilterPos err=0  currentPosition=0
11:28:18 FLIGetStepsRemaining err=0  RemainingSteps=0
11:28:18 Filter is already there-color wheel unchanged
11:28:19 Received message from Master: op=Shutter serial=192101
11:28:19 Shutter LASER close
11:28:19 Received message from Camera: op=State serial=192103
11:28:19 GetSingleValue result=40  Value=cccccccc
11:28:19 SkyScan query
11:28:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:28:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:28:19 Parameters OK
11:28:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:28:19 Set A/D data flow result=40
11:28:19 Set A/D channel type result=40
11:28:19 Set A/D encoding result=40
11:28:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:28:19 Set channel filter=0.000000e+000  result=40
11:28:19 Config A/D  Result=40
11:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:28:19 Get A/D filter: -9.255963e+061  result=40
11:28:19 Get A/D value=-858993460  result=40
11:28:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:28:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:28:19 Parameters OK
11:28:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:28:19 Set A/D data flow result=40
11:28:19 Set A/D channel type result=40
11:28:19 Set A/D encoding result=40
11:28:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:28:19 Set channel filter=0.000000e+000  result=40
11:28:19 Config A/D  Result=40
11:28:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:28:19 Get A/D filter: -9.255963e+061  result=40
11:28:19 Get A/D value=-858993460  result=40
11:28:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:28:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:28:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:28:19 Aux=
11:28:19 Message to Camera, serial 192103 queued
11:28:56 Received message from Master: op=PointingHead serial=192116
11:28:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:28:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:28:56 Point started: ret=0
11:28:56 point_skyscan result=0
11:28:57 Check angles
11:28:57 SkyScan query
11:28:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:28:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:28:58 Message to Master queued w/err=0: serial=192116 error=0
11:29:03 Received message from Master: op=Filter serial=192117
11:29:03 Color wheel filter change from 0 to 0
11:29:03 FLIGetFilterPos err=0  currentPosition=0
11:29:03 FLIGetStepsRemaining err=0  RemainingSteps=0
11:29:03 Filter is already there-color wheel unchanged
11:29:03 Received message from Master: op=Shutter serial=192118
11:29:03 Shutter LASER close
11:29:03 Received message from Camera: op=State serial=192120
11:29:03 GetSingleValue result=40  Value=cccccccc
11:29:03 SkyScan query
11:29:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:29:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:29:04 Parameters OK
11:29:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:29:04 Set A/D data flow result=40
11:29:04 Set A/D channel type result=40
11:29:04 Set A/D encoding result=40
11:29:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:29:04 Set channel filter=0.000000e+000  result=40
11:29:04 Config A/D  Result=40
11:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:29:04 Get A/D filter: -9.255963e+061  result=40
11:29:04 Get A/D value=-858993460  result=40
11:29:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:29:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:29:04 Parameters OK
11:29:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:29:04 Set A/D data flow result=40
11:29:04 Set A/D channel type result=40
11:29:04 Set A/D encoding result=40
11:29:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:29:04 Set channel filter=0.000000e+000  result=40
11:29:04 Config A/D  Result=40
11:29:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:29:04 Get A/D filter: -9.255963e+061  result=40
11:29:04 Get A/D value=-858993460  result=40
11:29:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:29:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:29:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:29:04 Aux=
11:29:04 Message to Camera, serial 192120 queued
11:29:39 Received message from Master: op=PointingHead serial=192132
11:29:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:29:39 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:29:40 Point started: ret=0
11:29:40 point_skyscan result=0
11:29:41 Check angles
11:29:41 SkyScan query
11:29:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.73<-13582  Statuses=0008 0009
11:29:41 Msec=0  True Az=112.995  Ze=-23.73  Az status=0008  Ze status=0009
11:29:41 Check angles
11:29:41 SkyScan query
11:29:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.685<-14979  Statuses=0008 0009
11:29:42 Msec=750  True Az=112.995  Ze=-44.685  Az status=0008  Ze status=0009
11:29:42 Check angles
11:29:42 SkyScan query
11:29:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.64<-16376  Statuses=0008 0009
11:29:43 Msec=1500  True Az=112.995  Ze=-65.64  Az status=0008  Ze status=0009
11:29:43 Check angles
11:29:43 SkyScan query
11:29:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.595<-17773  Statuses=0008 0009
11:29:43 Msec=2250  True Az=112.995  Ze=-86.595  Az status=0008  Ze status=0009
11:29:44 Check angles
11:29:44 SkyScan query
11:29:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.535<-19169  Statuses=0008 0009
11:29:44 Msec=3000  True Az=112.995  Ze=-107.535  Az status=0008  Ze status=0009
11:29:44 Check angles
11:29:44 SkyScan query
11:29:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.475<-20565  Statuses=0008 0009
11:29:45 Msec=3750  True Az=112.995  Ze=-128.475  Az status=0008  Ze status=0009
11:29:45 Check angles
11:29:45 SkyScan query
11:29:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.445<-21963  Statuses=0008 0009
11:29:46 Msec=4500  True Az=112.995  Ze=-149.445  Az status=0008  Ze status=0009
11:29:46 Check angles
11:29:46 SkyScan query
11:29:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.385<-23359  Statuses=0008 0009
11:29:46 Msec=5250  True Az=112.995  Ze=-170.385  Az status=0008  Ze status=0009
11:29:47 Check angles
11:29:47 SkyScan query
11:29:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:29:47 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:29:47 Message to Master queued w/err=0: serial=192132 error=0
11:29:52 Received message from Master: op=Filter serial=192133
11:29:52 Color wheel filter change from 0 to 0
11:29:52 FLIGetFilterPos err=0  currentPosition=0
11:29:52 FLIGetStepsRemaining err=0  RemainingSteps=0
11:29:52 Filter is already there-color wheel unchanged
11:29:52 Received message from Master: op=Shutter serial=192134
11:29:52 Shutter LASER open
11:29:53 Received message from Camera: op=State serial=192136
11:29:53 GetSingleValue result=40  Value=cccccccc
11:29:53 SkyScan query
11:29:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:29:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:29:53 Parameters OK
11:29:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:29:53 Set A/D data flow result=40
11:29:53 Set A/D channel type result=40
11:29:53 Set A/D encoding result=40
11:29:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:29:53 Set channel filter=0.000000e+000  result=40
11:29:53 Config A/D  Result=40
11:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:29:53 Get A/D filter: -9.255963e+061  result=40
11:29:53 Get A/D value=-858993460  result=40
11:29:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:29:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:29:53 Parameters OK
11:29:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:29:53 Set A/D data flow result=40
11:29:53 Set A/D channel type result=40
11:29:53 Set A/D encoding result=40
11:29:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:29:53 Set channel filter=0.000000e+000  result=40
11:29:53 Config A/D  Result=40
11:29:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:29:53 Get A/D filter: -9.255963e+061  result=40
11:29:53 Get A/D value=-858993460  result=40
11:29:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:29:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:29:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:29:53 Aux=
11:29:53 Message to Camera, serial 192136 queued
11:30:02 Received message from Master: op=Shutter serial=192146
11:30:02 Shutter LASER close
11:30:02 Received message from Master: op=PointingHead serial=192150
11:30:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:30:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:30:02 Point started: ret=0
11:30:02 point_skyscan result=0
11:30:03 Check angles
11:30:03 SkyScan query
11:30:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
11:30:04 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
11:30:04 Check angles
11:30:04 SkyScan query
11:30:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.28<-20152  Statuses=0008 0009
11:30:05 Msec=750  True Az=112.995  Ze=-122.28  Az status=0008  Ze status=0009
11:30:05 Check angles
11:30:05 SkyScan query
11:30:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.235<-18749  Statuses=0008 0009
11:30:05 Msec=1500  True Az=112.995  Ze=-101.235  Az status=0008  Ze status=0009
11:30:05 Check angles
11:30:05 SkyScan query
11:30:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.37<-17358  Statuses=0008 0009
11:30:06 Msec=2250  True Az=112.995  Ze=-80.37  Az status=0008  Ze status=0009
11:30:06 Check angles
11:30:06 SkyScan query
11:30:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.43<-15962  Statuses=0008 0009
11:30:07 Msec=3000  True Az=112.995  Ze=-59.43  Az status=0008  Ze status=0009
11:30:07 Check angles
11:30:07 SkyScan query
11:30:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.445<-14563  Statuses=0008 0009
11:30:08 Msec=3750  True Az=112.995  Ze=-38.445  Az status=0008  Ze status=0009
11:30:08 Check angles
11:30:08 SkyScan query
11:30:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.505<-13167  Statuses=0008 0009
11:30:08 Msec=4500  True Az=112.995  Ze=-17.505  Az status=0008  Ze status=0009
11:30:08 Check angles
11:30:08 SkyScan query
11:30:09 SkyScan query done: ret=0  az=112.995<-7533  ze=3.9<-11740  Statuses=0008 0009
11:30:09 Msec=5250  True Az=112.995  Ze=3.9  Az status=0008  Ze status=0009
11:30:09 Check angles
11:30:09 SkyScan query
11:30:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:30:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:30:10 Message to Master queued w/err=0: serial=192150 error=0
11:30:15 Received message from Master: op=Filter serial=192151
11:30:15 Color wheel filter change from 0 to 0
11:30:15 FLIGetFilterPos err=0  currentPosition=0
11:30:15 FLIGetStepsRemaining err=0  RemainingSteps=0
11:30:15 Filter is already there-color wheel unchanged
11:30:15 Received message from Master: op=Shutter serial=192152
11:30:15 Shutter LASER close
11:30:15 Received message from Camera: op=State serial=192154
11:30:15 GetSingleValue result=40  Value=cccccccc
11:30:15 SkyScan query
11:30:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:30:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:30:16 Parameters OK
11:30:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:30:16 Set A/D data flow result=40
11:30:16 Set A/D channel type result=40
11:30:16 Set A/D encoding result=40
11:30:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:30:16 Set channel filter=0.000000e+000  result=40
11:30:16 Config A/D  Result=40
11:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:30:16 Get A/D filter: -9.255963e+061  result=40
11:30:16 Get A/D value=-858993460  result=40
11:30:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:30:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:30:16 Parameters OK
11:30:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:30:16 Set A/D data flow result=40
11:30:16 Set A/D channel type result=40
11:30:16 Set A/D encoding result=40
11:30:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:30:16 Set channel filter=0.000000e+000  result=40
11:30:16 Config A/D  Result=40
11:30:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:30:16 Get A/D filter: -9.255963e+061  result=40
11:30:16 Get A/D value=-858993460  result=40
11:30:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:30:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:30:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:30:16 Aux=
11:30:16 Message to Camera, serial 192154 queued
11:30:53 Received message from Master: op=PointingHead serial=192167
11:30:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:30:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:30:53 Point started: ret=0
11:30:53 point_skyscan result=0
11:30:54 Check angles
11:30:54 SkyScan query
11:30:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:30:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:30:54 Message to Master queued w/err=0: serial=192167 error=0
11:30:59 Received message from Master: op=Filter serial=192168
11:30:59 Color wheel filter change from 0 to 0
11:30:59 FLIGetFilterPos err=0  currentPosition=0
11:30:59 FLIGetStepsRemaining err=0  RemainingSteps=0
11:30:59 Filter is already there-color wheel unchanged
11:30:59 Received message from Master: op=Shutter serial=192169
11:30:59 Shutter LASER close
11:30:59 Received message from Camera: op=State serial=192171
11:30:59 GetSingleValue result=40  Value=cccccccc
11:30:59 SkyScan query
11:31:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:31:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:31:00 Parameters OK
11:31:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:31:00 Set A/D data flow result=40
11:31:00 Set A/D channel type result=40
11:31:00 Set A/D encoding result=40
11:31:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:31:00 Set channel filter=0.000000e+000  result=40
11:31:00 Config A/D  Result=40
11:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:31:00 Get A/D filter: -9.255963e+061  result=40
11:31:00 Get A/D value=-858993460  result=40
11:31:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:31:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:31:00 Parameters OK
11:31:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:31:00 Set A/D data flow result=40
11:31:00 Set A/D channel type result=40
11:31:00 Set A/D encoding result=40
11:31:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:31:00 Set channel filter=0.000000e+000  result=40
11:31:00 Config A/D  Result=40
11:31:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:31:00 Get A/D filter: -9.255963e+061  result=40
11:31:00 Get A/D value=-858993460  result=40
11:31:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:31:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:31:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:31:00 Aux=
11:31:00 Message to Camera, serial 192171 queued
11:31:37 Received message from Master: op=PointingHead serial=192184
11:31:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:31:37 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:31:37 Point started: ret=0
11:31:37 point_skyscan result=0
11:31:38 Check angles
11:31:38 SkyScan query
11:31:38 SkyScan query done: ret=0  az=136.185<-9079  ze=-6.51<-12434  Statuses=0009 0008
11:31:38 Msec=0  True Az=136.185  Ze=-6.51  Az status=0009  Ze status=0008
11:31:39 Check angles
11:31:39 SkyScan query
11:31:39 SkyScan query done: ret=0  az=153.63<-10242  ze=-6.495<-12433  Statuses=0009 0008
11:31:39 Msec=750  True Az=153.63  Ze=-6.495  Az status=0009  Ze status=0008
11:31:39 Check angles
11:31:39 SkyScan query
11:31:40 SkyScan query done: ret=0  az=171.12<-11408  ze=-6.495<-12433  Statuses=0009 0008
11:31:40 Msec=1500  True Az=171.12  Ze=-6.495  Az status=0009  Ze status=0008
11:31:40 Check angles
11:31:40 SkyScan query
11:31:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:31:41 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:31:41 Message to Master queued w/err=0: serial=192184 error=0
11:31:46 Received message from Master: op=Filter serial=192185
11:31:46 Color wheel filter change from 0 to 0
11:31:46 FLIGetFilterPos err=0  currentPosition=0
11:31:46 FLIGetStepsRemaining err=0  RemainingSteps=0
11:31:46 Filter is already there-color wheel unchanged
11:31:46 Received message from Master: op=Shutter serial=192186
11:31:46 Shutter LASER close
11:31:46 Received message from Camera: op=State serial=192188
11:31:46 GetSingleValue result=40  Value=cccccccc
11:31:46 SkyScan query
11:31:47 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:31:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:31:47 Parameters OK
11:31:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:31:47 Set A/D data flow result=40
11:31:47 Set A/D channel type result=40
11:31:47 Set A/D encoding result=40
11:31:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:31:47 Set channel filter=0.000000e+000  result=40
11:31:47 Config A/D  Result=40
11:31:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:31:47 Get A/D filter: -9.255963e+061  result=40
11:31:47 Get A/D value=-858993460  result=40
11:31:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:31:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:31:47 Parameters OK
11:31:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:31:47 Set A/D data flow result=40
11:31:47 Set A/D channel type result=40
11:31:47 Set A/D encoding result=40
11:31:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:31:47 Set channel filter=0.000000e+000  result=40
11:31:47 Config A/D  Result=40
11:31:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:31:47 Get A/D filter: -9.255963e+061  result=40
11:31:47 Get A/D value=-858993460  result=40
11:31:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:31:47 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:31:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:31:47 Aux=
11:31:47 Message to Camera, serial 192188 queued
11:32:23 Received message from Master: op=PointingHead serial=192201
11:32:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:32:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:32:24 Point started: ret=0
11:32:24 point_skyscan result=0
11:32:24 Check angles
11:32:24 SkyScan query
11:32:25 SkyScan query done: ret=0  az=152.835<-10189  ze=6.51<-11566  Statuses=0009 0008
11:32:25 Msec=0  True Az=152.835  Ze=6.51  Az status=0009  Ze status=0008
11:32:25 Check angles
11:32:25 SkyScan query
11:32:26 SkyScan query done: ret=0  az=135.375<-9025  ze=6.495<-11567  Statuses=0009 0008
11:32:26 Msec=750  True Az=135.375  Ze=6.495  Az status=0009  Ze status=0008
11:32:26 Check angles
11:32:26 SkyScan query
11:32:27 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
11:32:27 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
11:32:27 Check angles
11:32:27 SkyScan query
11:32:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:32:27 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:32:27 Message to Master queued w/err=0: serial=192201 error=0
11:32:32 Received message from Master: op=Filter serial=192202
11:32:32 Color wheel filter change from 0 to 0
11:32:32 FLIGetFilterPos err=0  currentPosition=0
11:32:32 FLIGetStepsRemaining err=0  RemainingSteps=0
11:32:32 Filter is already there-color wheel unchanged
11:32:32 Received message from Master: op=Shutter serial=192203
11:32:32 Shutter LASER close
11:32:33 Received message from Camera: op=State serial=192205
11:32:33 GetSingleValue result=40  Value=cccccccc
11:32:33 SkyScan query
11:32:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:32:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:32:33 Parameters OK
11:32:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:32:33 Set A/D data flow result=40
11:32:33 Set A/D channel type result=40
11:32:33 Set A/D encoding result=40
11:32:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:32:33 Set channel filter=0.000000e+000  result=40
11:32:33 Config A/D  Result=40
11:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:32:33 Get A/D filter: -9.255963e+061  result=40
11:32:33 Get A/D value=-858993460  result=40
11:32:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:32:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:32:33 Parameters OK
11:32:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:32:33 Set A/D data flow result=40
11:32:33 Set A/D channel type result=40
11:32:33 Set A/D encoding result=40
11:32:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:32:33 Set channel filter=0.000000e+000  result=40
11:32:33 Config A/D  Result=40
11:32:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:32:33 Get A/D filter: -9.255963e+061  result=40
11:32:33 Get A/D value=-858993460  result=40
11:32:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:32:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:32:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:32:33 Aux=
11:32:33 Message to Camera, serial 192205 queued
11:33:10 Received message from Master: op=PointingHead serial=192218
11:33:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:33:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:33:10 Point started: ret=0
11:33:10 point_skyscan result=0
11:33:11 Check angles
11:33:11 SkyScan query
11:33:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.685<-13579  Statuses=0008 0009
11:33:12 Msec=0  True Az=112.995  Ze=-23.685  Az status=0008  Ze status=0009
11:33:12 Check angles
11:33:12 SkyScan query
11:33:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.075<-15005  Statuses=0008 0009
11:33:12 Msec=750  True Az=112.995  Ze=-45.075  Az status=0008  Ze status=0009
11:33:13 Check angles
11:33:13 SkyScan query
11:33:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.015<-16401  Statuses=0008 0009
11:33:13 Msec=1500  True Az=112.995  Ze=-66.015  Az status=0008  Ze status=0009
11:33:13 Check angles
11:33:13 SkyScan query
11:33:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.97<-17798  Statuses=0008 0009
11:33:14 Msec=2250  True Az=112.995  Ze=-86.97  Az status=0008  Ze status=0009
11:33:14 Check angles
11:33:14 SkyScan query
11:33:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.36<-19224  Statuses=0008 0009
11:33:15 Msec=3000  True Az=112.995  Ze=-108.36  Az status=0008  Ze status=0009
11:33:15 Check angles
11:33:15 SkyScan query
11:33:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.315<-20621  Statuses=0008 0009
11:33:15 Msec=3750  True Az=112.995  Ze=-129.315  Az status=0008  Ze status=0009
11:33:16 Check angles
11:33:16 SkyScan query
11:33:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.27<-22018  Statuses=0008 0009
11:33:16 Msec=4500  True Az=112.995  Ze=-150.27  Az status=0008  Ze status=0009
11:33:16 Check angles
11:33:16 SkyScan query
11:33:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.405<-23427  Statuses=0008 0009
11:33:17 Msec=5250  True Az=112.995  Ze=-171.405  Az status=0008  Ze status=0009
11:33:17 Check angles
11:33:17 SkyScan query
11:33:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:33:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:33:18 Message to Master queued w/err=0: serial=192218 error=0
11:33:23 Received message from Master: op=Filter serial=192219
11:33:23 Color wheel filter change from 0 to 0
11:33:23 FLIGetFilterPos err=0  currentPosition=0
11:33:23 FLIGetStepsRemaining err=0  RemainingSteps=0
11:33:23 Filter is already there-color wheel unchanged
11:33:23 Received message from Master: op=Shutter serial=192220
11:33:23 Shutter LASER open
11:33:23 Received message from Camera: op=State serial=192222
11:33:23 GetSingleValue result=40  Value=cccccccc
11:33:23 SkyScan query
11:33:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:33:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:33:24 Parameters OK
11:33:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:33:24 Set A/D data flow result=40
11:33:24 Set A/D channel type result=40
11:33:24 Set A/D encoding result=40
11:33:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:33:24 Set channel filter=0.000000e+000  result=40
11:33:24 Config A/D  Result=40
11:33:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:33:24 Get A/D filter: -9.255963e+061  result=40
11:33:24 Get A/D value=-858993460  result=40
11:33:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:33:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:33:24 Parameters OK
11:33:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:33:24 Set A/D data flow result=40
11:33:24 Set A/D channel type result=40
11:33:24 Set A/D encoding result=40
11:33:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:33:24 Set channel filter=0.000000e+000  result=40
11:33:24 Config A/D  Result=40
11:33:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:33:24 Get A/D filter: -9.255963e+061  result=40
11:33:24 Get A/D value=-858993460  result=40
11:33:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:33:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:33:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:33:24 Aux=
11:33:24 Message to Camera, serial 192222 queued
11:33:32 Received message from Master: op=Shutter serial=192232
11:33:32 Shutter LASER close
11:33:33 Received message from Master: op=PointingHead serial=192236
11:33:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:33:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:33:33 Point started: ret=0
11:33:33 point_skyscan result=0
11:33:34 Check angles
11:33:34 SkyScan query
11:33:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.16<-21544  Statuses=0008 0009
11:33:34 Msec=0  True Az=112.995  Ze=-143.16  Az status=0008  Ze status=0009
11:33:34 Check angles
11:33:34 SkyScan query
11:33:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.205<-20147  Statuses=0008 0009
11:33:35 Msec=750  True Az=112.995  Ze=-122.205  Az status=0008  Ze status=0009
11:33:35 Check angles
11:33:35 SkyScan query
11:33:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.265<-18751  Statuses=0008 0009
11:33:36 Msec=1500  True Az=112.995  Ze=-101.265  Az status=0008  Ze status=0009
11:33:36 Check angles
11:33:36 SkyScan query
11:33:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.295<-17353  Statuses=0008 0009
11:33:36 Msec=2250  True Az=112.995  Ze=-80.295  Az status=0008  Ze status=0009
11:33:36 Received message from Master: op=Identify serial=192237
11:33:37 Check angles
11:33:37 SkyScan query
11:33:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.355<-15957  Statuses=0008 0009
11:33:37 Msec=3000  True Az=112.995  Ze=-59.355  Az status=0008  Ze status=0009
11:33:37 Check angles
11:33:37 SkyScan query
11:33:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
11:33:38 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
11:33:38 Check angles
11:33:38 SkyScan query
11:33:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.995<-13133  Statuses=0008 0009
11:33:39 Msec=4500  True Az=112.995  Ze=-16.995  Az status=0008  Ze status=0009
11:33:39 Check angles
11:33:39 SkyScan query
11:33:39 SkyScan query done: ret=0  az=112.995<-7533  ze=4.335<-11711  Statuses=0008 0009
11:33:39 Msec=5250  True Az=112.995  Ze=4.335  Az status=0008  Ze status=0009
11:33:40 Check angles
11:33:40 SkyScan query
11:33:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:33:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:33:40 Message to Master queued w/err=0: serial=192236 error=0
11:33:45 Received message from Master: op=Filter serial=192240
11:33:45 Color wheel filter change from 0 to 0
11:33:45 FLIGetFilterPos err=0  currentPosition=0
11:33:45 FLIGetStepsRemaining err=0  RemainingSteps=0
11:33:45 Filter is already there-color wheel unchanged
11:33:45 Received message from Master: op=Shutter serial=192241
11:33:45 Shutter LASER close
11:33:46 Received message from Camera: op=State serial=192243
11:33:46 GetSingleValue result=40  Value=cccccccc
11:33:46 SkyScan query
11:33:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:33:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:33:46 Parameters OK
11:33:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:33:46 Set A/D data flow result=40
11:33:46 Set A/D channel type result=40
11:33:46 Set A/D encoding result=40
11:33:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:33:46 Set channel filter=0.000000e+000  result=40
11:33:46 Config A/D  Result=40
11:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:33:46 Get A/D filter: -9.255963e+061  result=40
11:33:46 Get A/D value=-858993460  result=40
11:33:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:33:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:33:46 Parameters OK
11:33:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:33:46 Set A/D data flow result=40
[UTC 2019-3-9  11:33:46]
11:33:46 Set A/D channel type result=40
11:33:46 Set A/D encoding result=40
11:33:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:33:46 Set channel filter=0.000000e+000  result=40
11:33:46 Config A/D  Result=40
11:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:33:46 Get A/D filter: -9.255963e+061  result=40
11:33:46 Get A/D value=-858993460  result=40
11:33:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:33:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:33:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:33:46 Aux=
11:33:46 Message to Camera, serial 192243 queued
11:34:23 Received message from Master: op=PointingHead serial=192256
11:34:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:34:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:34:23 Point started: ret=0
11:34:23 point_skyscan result=0
11:34:24 Check angles
11:34:24 SkyScan query
11:34:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:34:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:34:25 Message to Master queued w/err=0: serial=192256 error=0
11:34:30 Received message from Master: op=Filter serial=192257
11:34:30 Color wheel filter change from 0 to 0
11:34:30 FLIGetFilterPos err=0  currentPosition=0
11:34:30 FLIGetStepsRemaining err=0  RemainingSteps=0
11:34:30 Filter is already there-color wheel unchanged
11:34:30 Received message from Master: op=Shutter serial=192258
11:34:30 Shutter LASER close
11:34:30 Received message from Camera: op=State serial=192260
11:34:30 GetSingleValue result=40  Value=cccccccc
11:34:30 SkyScan query
11:34:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:34:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:34:30 Parameters OK
11:34:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:34:30 Set A/D data flow result=40
11:34:30 Set A/D channel type result=40
11:34:30 Set A/D encoding result=40
11:34:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:34:30 Set channel filter=0.000000e+000  result=40
11:34:30 Config A/D  Result=40
11:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:34:30 Get A/D filter: -9.255963e+061  result=40
11:34:30 Get A/D value=-858993460  result=40
11:34:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:34:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:34:30 Parameters OK
11:34:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:34:30 Set A/D data flow result=40
11:34:30 Set A/D channel type result=40
11:34:30 Set A/D encoding result=40
11:34:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:34:30 Set channel filter=0.000000e+000  result=40
11:34:30 Config A/D  Result=40
11:34:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:34:30 Get A/D filter: -9.255963e+061  result=40
11:34:30 Get A/D value=-858993460  result=40
11:34:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:34:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:34:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:34:30 Aux=
11:34:30 Message to Camera, serial 192260 queued
11:35:07 Received message from Master: op=PointingHead serial=192273
11:35:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:35:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:35:08 Point started: ret=0
11:35:08 point_skyscan result=0
11:35:08 Check angles
11:35:08 SkyScan query
11:35:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:35:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:35:09 Message to Master queued w/err=0: serial=192273 error=0
11:35:14 Received message from Master: op=Filter serial=192274
11:35:14 Color wheel filter change from 0 to 0
11:35:14 FLIGetFilterPos err=0  currentPosition=0
11:35:14 FLIGetStepsRemaining err=0  RemainingSteps=0
11:35:14 Filter is already there-color wheel unchanged
11:35:14 Received message from Master: op=Shutter serial=192275
11:35:14 Shutter LASER close
11:35:14 Received message from Camera: op=State serial=192277
11:35:14 GetSingleValue result=40  Value=cccccccc
11:35:14 SkyScan query
11:35:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:35:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:35:15 Parameters OK
11:35:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:35:15 Set A/D data flow result=40
11:35:15 Set A/D channel type result=40
11:35:15 Set A/D encoding result=40
11:35:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:35:15 Set channel filter=0.000000e+000  result=40
11:35:15 Config A/D  Result=40
11:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:35:15 Get A/D filter: -9.255963e+061  result=40
11:35:15 Get A/D value=-858993460  result=40
11:35:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:35:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:35:15 Parameters OK
11:35:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:35:15 Set A/D data flow result=40
11:35:15 Set A/D channel type result=40
11:35:15 Set A/D encoding result=40
11:35:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:35:15 Set channel filter=0.000000e+000  result=40
11:35:15 Config A/D  Result=40
11:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:35:15 Get A/D filter: -9.255963e+061  result=40
11:35:15 Get A/D value=-858993460  result=40
11:35:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:35:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:35:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:35:15 Aux=
11:35:15 Message to Camera, serial 192277 queued
11:35:52 Received message from Master: op=PointingHead serial=192290
11:35:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:35:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:35:52 Point started: ret=0
11:35:52 point_skyscan result=0
11:35:53 Check angles
11:35:53 SkyScan query
11:35:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:35:53 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:35:53 Message to Master queued w/err=0: serial=192290 error=0
11:35:58 Received message from Master: op=Filter serial=192291
11:35:58 Color wheel filter change from 0 to 0
11:35:58 FLIGetFilterPos err=0  currentPosition=0
11:35:58 FLIGetStepsRemaining err=0  RemainingSteps=0
11:35:58 Filter is already there-color wheel unchanged
11:35:58 Received message from Master: op=Shutter serial=192292
11:35:58 Shutter LASER close
11:35:59 Received message from Camera: op=State serial=192294
11:35:59 GetSingleValue result=40  Value=cccccccc
11:35:59 SkyScan query
11:35:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:35:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:35:59 Parameters OK
11:35:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:35:59 Set A/D data flow result=40
11:35:59 Set A/D channel type result=40
11:35:59 Set A/D encoding result=40
11:35:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:35:59 Set channel filter=0.000000e+000  result=40
11:35:59 Config A/D  Result=40
11:35:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:35:59 Get A/D filter: -9.255963e+061  result=40
11:35:59 Get A/D value=-858993460  result=40
11:35:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:35:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:35:59 Parameters OK
11:35:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:35:59 Set A/D data flow result=40
11:35:59 Set A/D channel type result=40
11:35:59 Set A/D encoding result=40
11:35:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:35:59 Set channel filter=0.000000e+000  result=40
11:35:59 Config A/D  Result=40
11:35:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:35:59 Get A/D filter: -9.255963e+061  result=40
11:35:59 Get A/D value=-858993460  result=40
11:35:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:35:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:35:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:35:59 Aux=
11:35:59 Message to Camera, serial 192294 queued
11:36:36 Received message from Master: op=PointingHead serial=192307
11:36:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:36:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:36:36 Point started: ret=0
11:36:36 point_skyscan result=0
11:36:37 Check angles
11:36:37 SkyScan query
11:36:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
11:36:38 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
11:36:38 Check angles
11:36:38 SkyScan query
11:36:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.31<-14954  Statuses=0008 0009
11:36:38 Msec=750  True Az=112.995  Ze=-44.31  Az status=0008  Ze status=0009
11:36:39 Check angles
11:36:39 SkyScan query
11:36:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.265<-16351  Statuses=0008 0009
11:36:39 Msec=1500  True Az=112.995  Ze=-65.265  Az status=0008  Ze status=0009
11:36:39 Check angles
11:36:39 SkyScan query
11:36:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.22<-17748  Statuses=0008 0009
11:36:40 Msec=2250  True Az=112.995  Ze=-86.22  Az status=0008  Ze status=0009
11:36:40 Check angles
11:36:40 SkyScan query
11:36:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.625<-19175  Statuses=0008 0009
11:36:41 Msec=3000  True Az=112.995  Ze=-107.625  Az status=0008  Ze status=0009
11:36:41 Check angles
11:36:41 SkyScan query
11:36:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.985<-20599  Statuses=0008 0009
11:36:41 Msec=3750  True Az=112.995  Ze=-128.985  Az status=0008  Ze status=0009
11:36:42 Check angles
11:36:42 SkyScan query
11:36:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.39<-22026  Statuses=0008 0009
11:36:42 Msec=4500  True Az=112.995  Ze=-150.39  Az status=0008  Ze status=0009
11:36:42 Check angles
11:36:42 SkyScan query
11:36:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.165<-23411  Statuses=0008 0009
11:36:43 Msec=5250  True Az=112.995  Ze=-171.165  Az status=0008  Ze status=0009
11:36:43 Check angles
11:36:43 SkyScan query
11:36:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:36:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:36:44 Message to Master queued w/err=0: serial=192307 error=0
11:36:49 Received message from Master: op=Filter serial=192308
11:36:49 Color wheel filter change from 0 to 0
11:36:49 FLIGetFilterPos err=0  currentPosition=0
11:36:49 FLIGetStepsRemaining err=0  RemainingSteps=0
11:36:49 Filter is already there-color wheel unchanged
11:36:49 Received message from Master: op=Shutter serial=192309
11:36:49 Shutter LASER open
11:36:49 Received message from Camera: op=State serial=192311
11:36:49 GetSingleValue result=40  Value=cccccccc
11:36:49 SkyScan query
11:36:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:36:50 Parameters OK
11:36:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:36:50 Set A/D data flow result=40
11:36:50 Set A/D channel type result=40
11:36:50 Set A/D encoding result=40
11:36:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:36:50 Set channel filter=0.000000e+000  result=40
11:36:50 Config A/D  Result=40
11:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:36:50 Get A/D filter: -9.255963e+061  result=40
11:36:50 Get A/D value=-858993460  result=40
11:36:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:36:50 Parameters OK
11:36:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:36:50 Set A/D data flow result=40
11:36:50 Set A/D channel type result=40
11:36:50 Set A/D encoding result=40
11:36:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:36:50 Set channel filter=0.000000e+000  result=40
11:36:50 Config A/D  Result=40
11:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:36:50 Get A/D filter: -9.255963e+061  result=40
11:36:50 Get A/D value=-858993460  result=40
11:36:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:36:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:36:50 Aux=
11:36:50 Message to Camera, serial 192311 queued
11:36:58 Received message from Master: op=Shutter serial=192321
11:36:58 Shutter LASER close
11:36:59 Received message from Master: op=PointingHead serial=192325
11:36:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:36:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:36:59 Point started: ret=0
11:36:59 point_skyscan result=0
11:37:00 Check angles
11:37:00 SkyScan query
11:37:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
11:37:00 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
11:37:00 Check angles
11:37:00 SkyScan query
11:37:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.71<-20114  Statuses=0008 0009
11:37:01 Msec=750  True Az=112.995  Ze=-121.71  Az status=0008  Ze status=0009
11:37:01 Check angles
11:37:01 SkyScan query
11:37:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.785<-18719  Statuses=0008 0009
11:37:02 Msec=1500  True Az=112.995  Ze=-100.785  Az status=0008  Ze status=0009
11:37:02 Check angles
11:37:02 SkyScan query
11:37:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.83<-17322  Statuses=0008 0009
11:37:03 Msec=2250  True Az=112.995  Ze=-79.83  Az status=0008  Ze status=0009
11:37:03 Check angles
11:37:03 SkyScan query
11:37:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.875<-15925  Statuses=0008 0009
11:37:03 Msec=3000  True Az=112.995  Ze=-58.875  Az status=0008  Ze status=0009
11:37:03 Check angles
11:37:03 SkyScan query
11:37:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.905<-14527  Statuses=0008 0009
11:37:04 Msec=3750  True Az=112.995  Ze=-37.905  Az status=0008  Ze status=0009
11:37:04 Check angles
11:37:04 SkyScan query
11:37:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.95<-13130  Statuses=0008 0009
11:37:05 Msec=4500  True Az=112.995  Ze=-16.95  Az status=0008  Ze status=0009
11:37:05 Check angles
11:37:05 SkyScan query
11:37:06 SkyScan query done: ret=0  az=112.995<-7533  ze=4.005<-11733  Statuses=0008 0009
11:37:06 Msec=5250  True Az=112.995  Ze=4.005  Az status=0008  Ze status=0009
11:37:06 Check angles
11:37:06 SkyScan query
11:37:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:37:06 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:37:06 Message to Master queued w/err=0: serial=192325 error=0
11:37:11 Received message from Master: op=Filter serial=192326
11:37:11 Color wheel filter change from 0 to 0
11:37:11 FLIGetFilterPos err=0  currentPosition=0
11:37:11 FLIGetStepsRemaining err=0  RemainingSteps=0
11:37:11 Filter is already there-color wheel unchanged
11:37:11 Received message from Master: op=Shutter serial=192327
11:37:11 Shutter LASER close
11:37:12 Received message from Camera: op=State serial=192329
11:37:12 GetSingleValue result=40  Value=cccccccc
11:37:12 SkyScan query
11:37:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:37:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:37:12 Parameters OK
11:37:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:37:12 Set A/D data flow result=40
11:37:12 Set A/D channel type result=40
11:37:12 Set A/D encoding result=40
11:37:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:37:12 Set channel filter=0.000000e+000  result=40
11:37:12 Config A/D  Result=40
11:37:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:37:12 Get A/D filter: -9.255963e+061  result=40
11:37:12 Get A/D value=-858993460  result=40
11:37:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:37:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:37:12 Parameters OK
11:37:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:37:12 Set A/D data flow result=40
11:37:12 Set A/D channel type result=40
11:37:12 Set A/D encoding result=40
11:37:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:37:12 Set channel filter=0.000000e+000  result=40
11:37:12 Config A/D  Result=40
11:37:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:37:12 Get A/D filter: -9.255963e+061  result=40
11:37:12 Get A/D value=-858993460  result=40
11:37:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:37:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:37:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:37:12 Aux=
11:37:12 Message to Camera, serial 192329 queued
11:37:49 Received message from Master: op=PointingHead serial=192342
11:37:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:37:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:37:49 Point started: ret=0
11:37:49 point_skyscan result=0
11:37:50 Check angles
11:37:50 SkyScan query
11:37:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:37:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:37:51 Message to Master queued w/err=0: serial=192342 error=0
11:37:56 Received message from Master: op=Filter serial=192343
11:37:56 Color wheel filter change from 0 to 0
11:37:56 FLIGetFilterPos err=0  currentPosition=0
11:37:56 FLIGetStepsRemaining err=0  RemainingSteps=0
11:37:56 Filter is already there-color wheel unchanged
11:37:56 Received message from Master: op=Shutter serial=192344
11:37:56 Shutter LASER close
11:37:56 Received message from Camera: op=State serial=192346
11:37:56 GetSingleValue result=40  Value=cccccccc
11:37:56 SkyScan query
11:37:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:37:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:37:56 Parameters OK
11:37:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:37:56 Set A/D data flow result=40
11:37:56 Set A/D channel type result=40
11:37:56 Set A/D encoding result=40
11:37:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:37:56 Set channel filter=0.000000e+000  result=40
11:37:56 Config A/D  Result=40
11:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:37:56 Get A/D filter: -9.255963e+061  result=40
11:37:56 Get A/D value=-858993460  result=40
11:37:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:37:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:37:56 Parameters OK
11:37:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:37:56 Set A/D data flow result=40
11:37:56 Set A/D channel type result=40
11:37:56 Set A/D encoding result=40
11:37:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:37:56 Set channel filter=0.000000e+000  result=40
11:37:56 Config A/D  Result=40
11:37:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:37:56 Get A/D filter: -9.255963e+061  result=40
11:37:56 Get A/D value=-858993460  result=40
11:37:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:37:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:37:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:37:56 Aux=
11:37:56 Message to Camera, serial 192346 queued
11:38:33 Received message from Master: op=PointingHead serial=192359
11:38:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:38:33 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:38:34 Point started: ret=0
11:38:34 point_skyscan result=0
11:38:34 Check angles
11:38:34 SkyScan query
11:38:35 SkyScan query done: ret=0  az=135.93<-9062  ze=-6.51<-12434  Statuses=0009 0008
11:38:35 Msec=0  True Az=135.93  Ze=-6.51  Az status=0009  Ze status=0008
11:38:35 Check angles
11:38:35 SkyScan query
11:38:36 SkyScan query done: ret=0  az=153.465<-10231  ze=-6.495<-12433  Statuses=0009 0008
11:38:36 Msec=750  True Az=153.465  Ze=-6.495  Az status=0009  Ze status=0008
11:38:36 Check angles
11:38:36 SkyScan query
11:38:37 SkyScan query done: ret=0  az=171.375<-11425  ze=-6.495<-12433  Statuses=0009 0008
11:38:37 Msec=1500  True Az=171.375  Ze=-6.495  Az status=0009  Ze status=0008
11:38:37 Check angles
11:38:37 SkyScan query
11:38:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:38:37 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:38:37 Message to Master queued w/err=0: serial=192359 error=0
11:38:42 Received message from Master: op=Filter serial=192360
11:38:42 Color wheel filter change from 0 to 0
11:38:42 FLIGetFilterPos err=0  currentPosition=0
11:38:42 FLIGetStepsRemaining err=0  RemainingSteps=0
11:38:42 Filter is already there-color wheel unchanged
11:38:42 Received message from Master: op=Shutter serial=192361
11:38:42 Shutter LASER close
11:38:42 Received message from Camera: op=State serial=192363
11:38:42 GetSingleValue result=40  Value=cccccccc
11:38:42 SkyScan query
11:38:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:38:43 Parameters OK
11:38:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:38:43 Set A/D data flow result=40
11:38:43 Set A/D channel type result=40
11:38:43 Set A/D encoding result=40
11:38:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:38:43 Set channel filter=0.000000e+000  result=40
11:38:43 Config A/D  Result=40
11:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:38:43 Get A/D filter: -9.255963e+061  result=40
11:38:43 Get A/D value=-858993460  result=40
11:38:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:38:43 Parameters OK
11:38:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:38:43 Set A/D data flow result=40
11:38:43 Set A/D channel type result=40
11:38:43 Set A/D encoding result=40
11:38:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:38:43 Set channel filter=0.000000e+000  result=40
11:38:43 Config A/D  Result=40
11:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:38:43 Get A/D filter: -9.255963e+061  result=40
11:38:43 Get A/D value=-858993460  result=40
11:38:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:38:43 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:38:43 Aux=
11:38:43 Message to Camera, serial 192363 queued
11:39:20 Received message from Master: op=PointingHead serial=192376
11:39:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:39:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:39:20 Point started: ret=0
11:39:20 point_skyscan result=0
11:39:21 Check angles
11:39:21 SkyScan query
11:39:22 SkyScan query done: ret=0  az=152.49<-10166  ze=6.51<-11566  Statuses=0009 0008
11:39:22 Msec=0  True Az=152.49  Ze=6.51  Az status=0009  Ze status=0008
11:39:22 Check angles
11:39:22 SkyScan query
11:39:22 SkyScan query done: ret=0  az=135<-9000  ze=6.495<-11567  Statuses=0009 0008
11:39:22 Msec=750  True Az=135  Ze=6.495  Az status=0009  Ze status=0008
11:39:23 Check angles
11:39:23 SkyScan query
11:39:23 SkyScan query done: ret=0  az=117.615<-7841  ze=6.495<-11567  Statuses=0009 0008
11:39:23 Msec=1500  True Az=117.615  Ze=6.495  Az status=0009  Ze status=0008
11:39:23 Check angles
11:39:23 SkyScan query
11:39:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:39:24 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:39:24 Message to Master queued w/err=0: serial=192376 error=0
11:39:29 Received message from Master: op=Filter serial=192377
11:39:29 Color wheel filter change from 0 to 0
11:39:29 FLIGetFilterPos err=0  currentPosition=0
11:39:29 FLIGetStepsRemaining err=0  RemainingSteps=0
11:39:29 Filter is already there-color wheel unchanged
11:39:29 Received message from Master: op=Shutter serial=192378
11:39:29 Shutter LASER close
11:39:29 Received message from Camera: op=State serial=192380
11:39:29 GetSingleValue result=40  Value=cccccccc
11:39:29 SkyScan query
11:39:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:39:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:39:30 Parameters OK
11:39:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:39:30 Set A/D data flow result=40
11:39:30 Set A/D channel type result=40
11:39:30 Set A/D encoding result=40
11:39:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:39:30 Set channel filter=0.000000e+000  result=40
11:39:30 Config A/D  Result=40
11:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:39:30 Get A/D filter: -9.255963e+061  result=40
11:39:30 Get A/D value=-858993460  result=40
11:39:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:39:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:39:30 Parameters OK
11:39:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:39:30 Set A/D data flow result=40
11:39:30 Set A/D channel type result=40
11:39:30 Set A/D encoding result=40
11:39:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:39:30 Set channel filter=0.000000e+000  result=40
11:39:30 Config A/D  Result=40
11:39:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:39:30 Get A/D filter: -9.255963e+061  result=40
11:39:30 Get A/D value=-858993460  result=40
11:39:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:39:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:39:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:39:30 Aux=
11:39:30 Message to Camera, serial 192380 queued
11:40:06 Received message from Master: op=PointingHead serial=192392
11:40:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:40:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:40:06 Point started: ret=0
11:40:06 point_skyscan result=0
11:40:07 Check angles
11:40:07 SkyScan query
11:40:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.265<-13551  Statuses=0008 0009
11:40:08 Msec=0  True Az=112.995  Ze=-23.265  Az status=0008  Ze status=0009
11:40:08 Check angles
11:40:08 SkyScan query
11:40:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.595<-14973  Statuses=0008 0009
11:40:08 Msec=750  True Az=112.995  Ze=-44.595  Az status=0008  Ze status=0009
11:40:09 Check angles
11:40:09 SkyScan query
11:40:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.16<-16344  Statuses=0008 0009
11:40:09 Msec=1500  True Az=112.995  Ze=-65.16  Az status=0008  Ze status=0009
11:40:09 Check angles
11:40:09 SkyScan query
11:40:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.64<-17776  Statuses=0008 0009
11:40:10 Msec=2250  True Az=112.995  Ze=-86.64  Az status=0008  Ze status=0009
11:40:10 Check angles
11:40:10 SkyScan query
11:40:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.925<-19195  Statuses=0008 0009
11:40:11 Msec=3000  True Az=112.995  Ze=-107.925  Az status=0008  Ze status=0009
11:40:11 Check angles
11:40:11 SkyScan query
11:40:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.375<-20625  Statuses=0008 0009
11:40:11 Msec=3750  True Az=112.995  Ze=-129.375  Az status=0008  Ze status=0009
11:40:12 Check angles
11:40:12 SkyScan query
11:40:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.255<-22017  Statuses=0008 0009
11:40:12 Msec=4500  True Az=112.995  Ze=-150.255  Az status=0008  Ze status=0009
11:40:12 Check angles
11:40:12 SkyScan query
11:40:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.18<-23412  Statuses=0008 0009
11:40:13 Msec=5250  True Az=112.995  Ze=-171.18  Az status=0008  Ze status=0009
11:40:13 Check angles
11:40:13 SkyScan query
11:40:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:40:14 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:40:14 Message to Master queued w/err=0: serial=192392 error=0
11:40:19 Received message from Master: op=Filter serial=192393
11:40:19 Color wheel filter change from 0 to 0
11:40:19 FLIGetFilterPos err=0  currentPosition=0
11:40:19 FLIGetStepsRemaining err=0  RemainingSteps=0
11:40:19 Filter is already there-color wheel unchanged
11:40:19 Received message from Master: op=Shutter serial=192394
11:40:19 Shutter LASER open
11:40:19 Received message from Camera: op=State serial=192396
11:40:19 GetSingleValue result=40  Value=cccccccc
11:40:19 SkyScan query
11:40:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:40:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:40:20 Parameters OK
11:40:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:40:20 Set A/D data flow result=40
11:40:20 Set A/D channel type result=40
11:40:20 Set A/D encoding result=40
11:40:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:40:20 Set channel filter=0.000000e+000  result=40
11:40:20 Config A/D  Result=40
11:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:40:20 Get A/D filter: -9.255963e+061  result=40
11:40:20 Get A/D value=-858993460  result=40
11:40:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:40:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:40:20 Parameters OK
11:40:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:40:20 Set A/D data flow result=40
11:40:20 Set A/D channel type result=40
11:40:20 Set A/D encoding result=40
11:40:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:40:20 Set channel filter=0.000000e+000  result=40
11:40:20 Config A/D  Result=40
11:40:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:40:20 Get A/D filter: -9.255963e+061  result=40
11:40:20 Get A/D value=-858993460  result=40
11:40:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:40:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:40:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:40:20 Aux=
11:40:20 Message to Camera, serial 192396 queued
11:40:28 Received message from Master: op=Shutter serial=192406
11:40:28 Shutter LASER close
11:40:28 Received message from Master: op=PointingHead serial=192410
11:40:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:40:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:40:29 Point started: ret=0
11:40:29 point_skyscan result=0
11:40:30 Check angles
11:40:30 SkyScan query
11:40:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.83<-21522  Statuses=0008 0009
11:40:30 Msec=0  True Az=112.995  Ze=-142.83  Az status=0008  Ze status=0009
11:40:30 Check angles
11:40:30 SkyScan query
11:40:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.455<-20097  Statuses=0008 0009
11:40:31 Msec=750  True Az=112.995  Ze=-121.455  Az status=0008  Ze status=0009
11:40:31 Check angles
11:40:31 SkyScan query
11:40:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.5<-18700  Statuses=0008 0009
11:40:32 Msec=1500  True Az=112.995  Ze=-100.5  Az status=0008  Ze status=0009
11:40:32 Check angles
11:40:32 SkyScan query
11:40:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.53<-17302  Statuses=0008 0009
11:40:32 Msec=2250  True Az=112.995  Ze=-79.53  Az status=0008  Ze status=0009
11:40:33 Check angles
11:40:33 SkyScan query
11:40:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.575<-15905  Statuses=0008 0009
11:40:33 Msec=3000  True Az=112.995  Ze=-58.575  Az status=0008  Ze status=0009
11:40:33 Check angles
11:40:33 SkyScan query
11:40:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.62<-14508  Statuses=0008 0009
11:40:34 Msec=3750  True Az=112.995  Ze=-37.62  Az status=0008  Ze status=0009
11:40:34 Check angles
11:40:34 SkyScan query
11:40:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.215<-13081  Statuses=0008 0009
11:40:35 Msec=4500  True Az=112.995  Ze=-16.215  Az status=0008  Ze status=0009
11:40:35 Check angles
11:40:35 SkyScan query
11:40:35 SkyScan query done: ret=0  az=112.995<-7533  ze=4.59<-11694  Statuses=0008 0009
11:40:35 Msec=5250  True Az=112.995  Ze=4.59  Az status=0008  Ze status=0009
11:40:36 Check angles
11:40:36 SkyScan query
11:40:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:40:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:40:36 Message to Master queued w/err=0: serial=192410 error=0
11:40:41 Received message from Master: op=Filter serial=192411
11:40:41 Color wheel filter change from 0 to 0
11:40:41 FLIGetFilterPos err=0  currentPosition=0
11:40:41 FLIGetStepsRemaining err=0  RemainingSteps=0
11:40:41 Filter is already there-color wheel unchanged
11:40:41 Received message from Master: op=Shutter serial=192412
11:40:41 Shutter LASER close
11:40:41 Received message from Camera: op=State serial=192414
11:40:41 GetSingleValue result=40  Value=cccccccc
11:40:41 SkyScan query
11:40:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:40:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:40:42 Parameters OK
11:40:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:40:42 Set A/D data flow result=40
11:40:42 Set A/D channel type result=40
11:40:42 Set A/D encoding result=40
11:40:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:40:42 Set channel filter=0.000000e+000  result=40
11:40:42 Config A/D  Result=40
11:40:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:40:42 Get A/D filter: -9.255963e+061  result=40
11:40:42 Get A/D value=-858993460  result=40
11:40:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:40:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:40:42 Parameters OK
11:40:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:40:42 Set A/D data flow result=40
11:40:42 Set A/D channel type result=40
11:40:42 Set A/D encoding result=40
11:40:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:40:42 Set channel filter=0.000000e+000  result=40
11:40:42 Config A/D  Result=40
11:40:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:40:42 Get A/D filter: -9.255963e+061  result=40
11:40:42 Get A/D value=-858993460  result=40
11:40:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:40:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:40:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:40:42 Aux=
11:40:42 Message to Camera, serial 192414 queued
11:41:19 Received message from Master: op=PointingHead serial=192427
11:41:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:41:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:41:19 Point started: ret=0
11:41:19 point_skyscan result=0
11:41:20 Check angles
11:41:20 SkyScan query
11:41:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:41:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:41:21 Message to Master queued w/err=0: serial=192427 error=0
11:41:26 Received message from Master: op=Filter serial=192428
11:41:26 Color wheel filter change from 0 to 0
11:41:26 FLIGetFilterPos err=0  currentPosition=0
11:41:26 FLIGetStepsRemaining err=0  RemainingSteps=0
11:41:26 Filter is already there-color wheel unchanged
11:41:26 Received message from Master: op=Shutter serial=192429
11:41:26 Shutter LASER close
11:41:26 Received message from Camera: op=State serial=192431
11:41:26 GetSingleValue result=40  Value=cccccccc
11:41:26 SkyScan query
11:41:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:41:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:41:26 Parameters OK
11:41:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:41:26 Set A/D data flow result=40
11:41:26 Set A/D channel type result=40
11:41:26 Set A/D encoding result=40
11:41:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:41:26 Set channel filter=0.000000e+000  result=40
11:41:26 Config A/D  Result=40
11:41:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:41:26 Get A/D filter: -9.255963e+061  result=40
11:41:26 Get A/D value=-858993460  result=40
11:41:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:41:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:41:26 Parameters OK
11:41:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:41:26 Set A/D data flow result=40
11:41:26 Set A/D channel type result=40
11:41:26 Set A/D encoding result=40
11:41:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:41:26 Set channel filter=0.000000e+000  result=40
11:41:26 Config A/D  Result=40
11:41:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:41:26 Get A/D filter: -9.255963e+061  result=40
11:41:26 Get A/D value=-858993460  result=40
11:41:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:41:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:41:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:41:26 Aux=
11:41:26 Message to Camera, serial 192431 queued
11:42:03 Received message from Master: op=PointingHead serial=192444
11:42:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:42:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:42:04 Point started: ret=0
11:42:04 point_skyscan result=0
11:42:04 Check angles
11:42:04 SkyScan query
11:42:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:42:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:42:05 Message to Master queued w/err=0: serial=192444 error=0
11:42:10 Received message from Master: op=Filter serial=192445
11:42:10 Color wheel filter change from 0 to 0
11:42:10 FLIGetFilterPos err=0  currentPosition=0
11:42:10 FLIGetStepsRemaining err=0  RemainingSteps=0
11:42:10 Filter is already there-color wheel unchanged
11:42:10 Received message from Master: op=Shutter serial=192446
11:42:10 Shutter LASER close
11:42:10 Received message from Camera: op=State serial=192448
11:42:10 GetSingleValue result=40  Value=cccccccc
11:42:10 SkyScan query
11:42:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:42:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:42:11 Parameters OK
11:42:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:42:11 Set A/D data flow result=40
11:42:11 Set A/D channel type result=40
11:42:11 Set A/D encoding result=40
11:42:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:42:11 Set channel filter=0.000000e+000  result=40
11:42:11 Config A/D  Result=40
11:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:42:11 Get A/D filter: -9.255963e+061  result=40
11:42:11 Get A/D value=-858993460  result=40
11:42:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:42:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:42:11 Parameters OK
11:42:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:42:11 Set A/D data flow result=40
11:42:11 Set A/D channel type result=40
11:42:11 Set A/D encoding result=40
11:42:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:42:11 Set channel filter=0.000000e+000  result=40
11:42:11 Config A/D  Result=40
11:42:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:42:11 Get A/D filter: -9.255963e+061  result=40
11:42:11 Get A/D value=-858993460  result=40
11:42:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:42:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:42:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:42:11 Aux=
11:42:11 Message to Camera, serial 192448 queued
11:42:48 Received message from Master: op=PointingHead serial=192461
11:42:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:42:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:42:48 Point started: ret=0
11:42:48 point_skyscan result=0
11:42:49 Check angles
11:42:49 SkyScan query
11:42:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:42:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:42:49 Message to Master queued w/err=0: serial=192461 error=0
11:42:54 Received message from Master: op=Filter serial=192462
11:42:54 Color wheel filter change from 0 to 0
11:42:54 FLIGetFilterPos err=0  currentPosition=0
11:42:54 FLIGetStepsRemaining err=0  RemainingSteps=0
11:42:54 Filter is already there-color wheel unchanged
11:42:54 Received message from Master: op=Shutter serial=192463
11:42:54 Shutter LASER close
11:42:54 Received message from Camera: op=State serial=192465
11:42:54 GetSingleValue result=40  Value=cccccccc
11:42:54 SkyScan query
11:42:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:42:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:42:55 Parameters OK
11:42:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:42:55 Set A/D data flow result=40
11:42:55 Set A/D channel type result=40
11:42:55 Set A/D encoding result=40
11:42:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:42:55 Set channel filter=0.000000e+000  result=40
11:42:55 Config A/D  Result=40
11:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:42:55 Get A/D filter: -9.255963e+061  result=40
11:42:55 Get A/D value=-858993460  result=40
11:42:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:42:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:42:55 Parameters OK
11:42:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:42:55 Set A/D data flow result=40
11:42:55 Set A/D channel type result=40
11:42:55 Set A/D encoding result=40
11:42:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:42:55 Set channel filter=0.000000e+000  result=40
11:42:55 Config A/D  Result=40
11:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:42:55 Get A/D filter: -9.255963e+061  result=40
11:42:55 Get A/D value=-858993460  result=40
11:42:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:42:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:42:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:42:55 Aux=
11:42:55 Message to Camera, serial 192465 queued
11:43:32 Received message from Master: op=PointingHead serial=192478
11:43:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:43:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:43:32 Point started: ret=0
11:43:32 point_skyscan result=0
11:43:33 Check angles
11:43:33 SkyScan query
11:43:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
11:43:34 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
11:43:34 Check angles
11:43:34 SkyScan query
11:43:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.865<-14991  Statuses=0008 0009
11:43:34 Msec=750  True Az=112.995  Ze=-44.865  Az status=0008  Ze status=0009
11:43:35 Check angles
11:43:35 SkyScan query
11:43:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.715<-16381  Statuses=0008 0009
11:43:35 Msec=1500  True Az=112.995  Ze=-65.715  Az status=0008  Ze status=0009
11:43:35 Check angles
11:43:35 SkyScan query
11:43:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.67<-17778  Statuses=0008 0009
11:43:36 Msec=2250  True Az=112.995  Ze=-86.67  Az status=0008  Ze status=0009
11:43:36 Check angles
11:43:36 SkyScan query
11:43:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.625<-19175  Statuses=0008 0009
11:43:37 Msec=3000  True Az=112.995  Ze=-107.625  Az status=0008  Ze status=0009
11:43:37 Check angles
11:43:37 SkyScan query
11:43:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.565<-20571  Statuses=0008 0009
11:43:37 Msec=3750  True Az=112.995  Ze=-128.565  Az status=0008  Ze status=0009
11:43:38 Check angles
11:43:38 SkyScan query
11:43:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.535<-21969  Statuses=0008 0009
11:43:38 Msec=4500  True Az=112.995  Ze=-149.535  Az status=0008  Ze status=0009
11:43:38 Check angles
11:43:38 SkyScan query
11:43:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.475<-23365  Statuses=0008 0009
11:43:39 Msec=5250  True Az=112.995  Ze=-170.475  Az status=0008  Ze status=0009
11:43:39 Check angles
11:43:39 SkyScan query
11:43:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:43:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:43:40 Message to Master queued w/err=0: serial=192478 error=0
11:43:45 Received message from Master: op=Filter serial=192479
11:43:45 Color wheel filter change from 0 to 0
11:43:45 FLIGetFilterPos err=0  currentPosition=0
11:43:45 FLIGetStepsRemaining err=0  RemainingSteps=0
11:43:45 Filter is already there-color wheel unchanged
11:43:45 Received message from Master: op=Shutter serial=192480
11:43:45 Shutter LASER open
11:43:45 Received message from Camera: op=State serial=192482
11:43:45 GetSingleValue result=40  Value=cccccccc
11:43:45 SkyScan query
11:43:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:43:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:43:46 Parameters OK
11:43:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:43:46 Set A/D data flow result=40
11:43:46 Set A/D channel type result=40
11:43:46 Set A/D encoding result=40
11:43:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:43:46 Set channel filter=0.000000e+000  result=40
11:43:46 Config A/D  Result=40
11:43:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:43:46 Get A/D filter: -9.255963e+061  result=40
11:43:46 Get A/D value=-858993460  result=40
11:43:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:43:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:43:46 Parameters OK
11:43:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:43:46 Set A/D data flow result=40
11:43:46 Set A/D channel type result=40
11:43:46 Set A/D encoding result=40
11:43:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:43:46 Set channel filter=0.000000e+000  result=40
11:43:46 Config A/D  Result=40
11:43:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:43:46 Get A/D filter: -9.255963e+061  result=40
11:43:46 Get A/D value=-858993460  result=40
11:43:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:43:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:43:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:43:46 Aux=
11:43:46 Message to Camera, serial 192482 queued
[UTC 2019-3-9  11:43:48]
11:43:54 Received message from Master: op=Shutter serial=192492
11:43:54 Shutter LASER close
11:43:55 Received message from Master: op=PointingHead serial=192496
11:43:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:43:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:43:55 Point started: ret=0
11:43:55 point_skyscan result=0
11:43:56 Check angles
11:43:56 SkyScan query
11:43:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
11:43:56 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
11:43:56 Check angles
11:43:56 SkyScan query
11:43:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.025<-20135  Statuses=0008 0009
11:43:57 Msec=750  True Az=112.995  Ze=-122.025  Az status=0008  Ze status=0009
11:43:57 Check angles
11:43:57 SkyScan query
11:43:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.085<-18739  Statuses=0008 0009
11:43:58 Msec=1500  True Az=112.995  Ze=-101.085  Az status=0008  Ze status=0009
11:43:58 Check angles
11:43:58 SkyScan query
11:43:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
11:43:58 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
11:43:59 Check angles
11:43:59 SkyScan query
11:43:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.19<-15946  Statuses=0008 0009
11:43:59 Msec=3000  True Az=112.995  Ze=-59.19  Az status=0008  Ze status=0009
11:43:59 Check angles
11:43:59 SkyScan query
11:44:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.19<-14546  Statuses=0008 0009
11:44:00 Msec=3750  True Az=112.995  Ze=-38.19  Az status=0008  Ze status=0009
11:44:00 Check angles
11:44:00 SkyScan query
11:44:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
11:44:01 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
11:44:01 Check angles
11:44:01 SkyScan query
11:44:01 SkyScan query done: ret=0  az=112.995<-7533  ze=3.705<-11753  Statuses=0008 0009
11:44:01 Msec=5250  True Az=112.995  Ze=3.705  Az status=0008  Ze status=0009
11:44:02 Check angles
11:44:02 SkyScan query
11:44:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:44:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:44:02 Message to Master queued w/err=0: serial=192496 error=0
11:44:07 Received message from Master: op=Filter serial=192497
11:44:07 Color wheel filter change from 0 to 0
11:44:07 FLIGetFilterPos err=0  currentPosition=0
11:44:07 FLIGetStepsRemaining err=0  RemainingSteps=0
11:44:07 Filter is already there-color wheel unchanged
11:44:07 Received message from Master: op=Shutter serial=192498
11:44:07 Shutter LASER close
11:44:08 Received message from Camera: op=State serial=192500
11:44:08 GetSingleValue result=40  Value=cccccccc
11:44:08 SkyScan query
11:44:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:44:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:44:08 Parameters OK
11:44:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:44:08 Set A/D data flow result=40
11:44:08 Set A/D channel type result=40
11:44:08 Set A/D encoding result=40
11:44:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:44:08 Set channel filter=0.000000e+000  result=40
11:44:08 Config A/D  Result=40
11:44:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:44:08 Get A/D filter: -9.255963e+061  result=40
11:44:08 Get A/D value=-858993460  result=40
11:44:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:44:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:44:08 Parameters OK
11:44:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:44:08 Set A/D data flow result=40
11:44:08 Set A/D channel type result=40
11:44:08 Set A/D encoding result=40
11:44:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:44:08 Set channel filter=0.000000e+000  result=40
11:44:08 Config A/D  Result=40
11:44:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:44:08 Get A/D filter: -9.255963e+061  result=40
11:44:08 Get A/D value=-858993460  result=40
11:44:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:44:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:44:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:44:08 Aux=
11:44:08 Message to Camera, serial 192500 queued
11:44:45 Received message from Master: op=PointingHead serial=192513
11:44:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:44:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:44:45 Point started: ret=0
11:44:45 point_skyscan result=0
11:44:46 Check angles
11:44:46 SkyScan query
11:44:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:44:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:44:47 Message to Master queued w/err=0: serial=192513 error=0
11:44:52 Received message from Master: op=Filter serial=192514
11:44:52 Color wheel filter change from 0 to 0
11:44:52 FLIGetFilterPos err=0  currentPosition=0
11:44:52 FLIGetStepsRemaining err=0  RemainingSteps=0
11:44:52 Filter is already there-color wheel unchanged
11:44:52 Received message from Master: op=Shutter serial=192515
11:44:52 Shutter LASER close
11:44:52 Received message from Camera: op=State serial=192517
11:44:52 GetSingleValue result=40  Value=cccccccc
11:44:52 SkyScan query
11:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:44:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:44:52 Parameters OK
11:44:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:44:52 Set A/D data flow result=40
11:44:52 Set A/D channel type result=40
11:44:52 Set A/D encoding result=40
11:44:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:44:52 Set channel filter=0.000000e+000  result=40
11:44:52 Config A/D  Result=40
11:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:44:52 Get A/D filter: -9.255963e+061  result=40
11:44:52 Get A/D value=-858993460  result=40
11:44:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:44:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:44:52 Parameters OK
11:44:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:44:52 Set A/D data flow result=40
11:44:52 Set A/D channel type result=40
11:44:52 Set A/D encoding result=40
11:44:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:44:52 Set channel filter=0.000000e+000  result=40
11:44:52 Config A/D  Result=40
11:44:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:44:52 Get A/D filter: -9.255963e+061  result=40
11:44:52 Get A/D value=-858993460  result=40
11:44:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:44:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:44:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:44:52 Aux=
11:44:52 Message to Camera, serial 192517 queued
11:45:28 Received message from Master: op=PointingHead serial=192529
11:45:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:45:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:45:29 Point started: ret=0
11:45:29 point_skyscan result=0
11:45:29 Check angles
11:45:29 SkyScan query
11:45:30 SkyScan query done: ret=0  az=135.675<-9045  ze=-6.51<-12434  Statuses=0009 0008
11:45:30 Msec=0  True Az=135.675  Ze=-6.51  Az status=0009  Ze status=0008
11:45:30 Check angles
11:45:30 SkyScan query
11:45:31 SkyScan query done: ret=0  az=153.21<-10214  ze=-6.495<-12433  Statuses=0009 0008
11:45:31 Msec=750  True Az=153.21  Ze=-6.495  Az status=0009  Ze status=0008
11:45:31 Check angles
11:45:31 SkyScan query
11:45:31 SkyScan query done: ret=0  az=170.625<-11375  ze=-6.495<-12433  Statuses=0009 0008
11:45:31 Msec=1500  True Az=170.625  Ze=-6.495  Az status=0009  Ze status=0008
11:45:32 Check angles
11:45:32 SkyScan query
11:45:32 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:45:32 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:45:32 Message to Master queued w/err=0: serial=192529 error=0
11:45:37 Received message from Master: op=Filter serial=192530
11:45:37 Color wheel filter change from 0 to 0
11:45:37 FLIGetFilterPos err=0  currentPosition=0
11:45:37 FLIGetStepsRemaining err=0  RemainingSteps=0
11:45:37 Filter is already there-color wheel unchanged
11:45:37 Received message from Master: op=Shutter serial=192531
11:45:37 Shutter LASER close
11:45:37 Received message from Camera: op=State serial=192533
11:45:37 GetSingleValue result=40  Value=cccccccc
11:45:37 SkyScan query
11:45:38 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:45:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:45:38 Parameters OK
11:45:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:45:38 Set A/D data flow result=40
11:45:38 Set A/D channel type result=40
11:45:38 Set A/D encoding result=40
11:45:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:45:38 Set channel filter=0.000000e+000  result=40
11:45:38 Config A/D  Result=40
11:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:45:38 Get A/D filter: -9.255963e+061  result=40
11:45:38 Get A/D value=-858993460  result=40
11:45:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:45:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:45:38 Parameters OK
11:45:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:45:38 Set A/D data flow result=40
11:45:38 Set A/D channel type result=40
11:45:38 Set A/D encoding result=40
11:45:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:45:38 Set channel filter=0.000000e+000  result=40
11:45:38 Config A/D  Result=40
11:45:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:45:38 Get A/D filter: -9.255963e+061  result=40
11:45:38 Get A/D value=-858993460  result=40
11:45:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:45:38 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:45:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:45:38 Aux=
11:45:38 Message to Camera, serial 192533 queued
11:46:15 Received message from Master: op=PointingHead serial=192546
11:46:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:46:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:46:15 Point started: ret=0
11:46:15 point_skyscan result=0
11:46:16 Check angles
11:46:16 SkyScan query
11:46:17 SkyScan query done: ret=0  az=152.805<-10187  ze=6.51<-11566  Statuses=0009 0008
11:46:17 Msec=0  True Az=152.805  Ze=6.51  Az status=0009  Ze status=0008
11:46:17 Check angles
11:46:17 SkyScan query
11:46:17 SkyScan query done: ret=0  az=135.345<-9023  ze=6.495<-11567  Statuses=0009 0008
11:46:17 Msec=750  True Az=135.345  Ze=6.495  Az status=0009  Ze status=0008
11:46:17 Check angles
11:46:17 SkyScan query
11:46:18 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
11:46:18 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
11:46:18 Check angles
11:46:18 SkyScan query
11:46:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:46:19 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:46:19 Message to Master queued w/err=0: serial=192546 error=0
11:46:24 Received message from Master: op=Filter serial=192547
11:46:24 Color wheel filter change from 0 to 0
11:46:24 FLIGetFilterPos err=0  currentPosition=0
11:46:24 FLIGetStepsRemaining err=0  RemainingSteps=0
11:46:24 Filter is already there-color wheel unchanged
11:46:24 Received message from Master: op=Shutter serial=192548
11:46:24 Shutter LASER close
11:46:24 Received message from Camera: op=State serial=192550
11:46:24 GetSingleValue result=40  Value=cccccccc
11:46:24 SkyScan query
11:46:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:46:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:46:25 Parameters OK
11:46:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:46:25 Set A/D data flow result=40
11:46:25 Set A/D channel type result=40
11:46:25 Set A/D encoding result=40
11:46:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:46:25 Set channel filter=0.000000e+000  result=40
11:46:25 Config A/D  Result=40
11:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:46:25 Get A/D filter: -9.255963e+061  result=40
11:46:25 Get A/D value=-858993460  result=40
11:46:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:46:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:46:25 Parameters OK
11:46:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:46:25 Set A/D data flow result=40
11:46:25 Set A/D channel type result=40
11:46:25 Set A/D encoding result=40
11:46:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:46:25 Set channel filter=0.000000e+000  result=40
11:46:25 Config A/D  Result=40
11:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:46:25 Get A/D filter: -9.255963e+061  result=40
11:46:25 Get A/D value=-858993460  result=40
11:46:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:46:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:46:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:46:25 Aux=
11:46:25 Message to Camera, serial 192550 queued
11:47:01 Received message from Master: op=PointingHead serial=192563
11:47:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:47:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:47:02 Point started: ret=0
11:47:02 point_skyscan result=0
11:47:03 Check angles
11:47:03 SkyScan query
11:47:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.49<-13566  Statuses=0008 0009
11:47:03 Msec=0  True Az=112.995  Ze=-23.49  Az status=0008  Ze status=0009
11:47:03 Check angles
11:47:03 SkyScan query
11:47:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.475<-14965  Statuses=0008 0009
11:47:04 Msec=750  True Az=112.995  Ze=-44.475  Az status=0008  Ze status=0009
11:47:04 Check angles
11:47:04 SkyScan query
11:47:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.415<-16361  Statuses=0008 0009
11:47:05 Msec=1500  True Az=112.995  Ze=-65.415  Az status=0008  Ze status=0009
11:47:05 Check angles
11:47:05 SkyScan query
11:47:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.37<-17758  Statuses=0008 0009
11:47:05 Msec=2250  True Az=112.995  Ze=-86.37  Az status=0008  Ze status=0009
11:47:06 Check angles
11:47:06 SkyScan query
11:47:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.34<-19156  Statuses=0008 0009
11:47:06 Msec=3000  True Az=112.995  Ze=-107.34  Az status=0008  Ze status=0009
11:47:06 Check angles
11:47:06 SkyScan query
11:47:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.28<-20552  Statuses=0008 0009
11:47:07 Msec=3750  True Az=112.995  Ze=-128.28  Az status=0008  Ze status=0009
11:47:07 Check angles
11:47:07 SkyScan query
11:47:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.235<-21949  Statuses=0008 0009
11:47:08 Msec=4500  True Az=112.995  Ze=-149.235  Az status=0008  Ze status=0009
11:47:08 Check angles
11:47:08 SkyScan query
11:47:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.58<-23372  Statuses=0008 0009
11:47:08 Msec=5250  True Az=112.995  Ze=-170.58  Az status=0008  Ze status=0009
11:47:09 Check angles
11:47:09 SkyScan query
11:47:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:47:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:47:09 Message to Master queued w/err=0: serial=192563 error=0
11:47:14 Received message from Master: op=Filter serial=192564
11:47:14 Color wheel filter change from 0 to 0
11:47:14 FLIGetFilterPos err=0  currentPosition=0
11:47:14 FLIGetStepsRemaining err=0  RemainingSteps=0
11:47:14 Filter is already there-color wheel unchanged
11:47:14 Received message from Master: op=Shutter serial=192565
11:47:14 Shutter LASER open
11:47:15 Received message from Camera: op=State serial=192567
11:47:15 GetSingleValue result=40  Value=cccccccc
11:47:15 SkyScan query
11:47:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:47:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:47:15 Parameters OK
11:47:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:47:15 Set A/D data flow result=40
11:47:15 Set A/D channel type result=40
11:47:15 Set A/D encoding result=40
11:47:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:47:15 Set channel filter=0.000000e+000  result=40
11:47:15 Config A/D  Result=40
11:47:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:47:15 Get A/D filter: -9.255963e+061  result=40
11:47:15 Get A/D value=-858993460  result=40
11:47:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:47:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:47:15 Parameters OK
11:47:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:47:15 Set A/D data flow result=40
11:47:15 Set A/D channel type result=40
11:47:15 Set A/D encoding result=40
11:47:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:47:15 Set channel filter=0.000000e+000  result=40
11:47:15 Config A/D  Result=40
11:47:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:47:15 Get A/D filter: -9.255963e+061  result=40
11:47:15 Get A/D value=-858993460  result=40
11:47:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:47:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:47:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:47:15 Aux=
11:47:15 Message to Camera, serial 192567 queued
11:47:24 Received message from Master: op=Shutter serial=192577
11:47:24 Shutter LASER close
11:47:24 Received message from Master: op=PointingHead serial=192581
11:47:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:47:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:47:24 Point started: ret=0
11:47:24 point_skyscan result=0
11:47:25 Check angles
11:47:25 SkyScan query
11:47:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.71<-21514  Statuses=0008 0009
11:47:26 Msec=0  True Az=112.995  Ze=-142.71  Az status=0008  Ze status=0009
11:47:26 Check angles
11:47:26 SkyScan query
11:47:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.74<-20116  Statuses=0008 0009
11:47:26 Msec=750  True Az=112.995  Ze=-121.74  Az status=0008  Ze status=0009
11:47:27 Check angles
11:47:27 SkyScan query
11:47:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.815<-18721  Statuses=0008 0009
11:47:27 Msec=1500  True Az=112.995  Ze=-100.815  Az status=0008  Ze status=0009
11:47:27 Check angles
11:47:27 SkyScan query
11:47:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.845<-17323  Statuses=0008 0009
11:47:28 Msec=2250  True Az=112.995  Ze=-79.845  Az status=0008  Ze status=0009
11:47:28 Check angles
11:47:28 SkyScan query
11:47:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.905<-15927  Statuses=0008 0009
11:47:29 Msec=3000  True Az=112.995  Ze=-58.905  Az status=0008  Ze status=0009
11:47:29 Check angles
11:47:29 SkyScan query
11:47:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.935<-14529  Statuses=0008 0009
11:47:29 Msec=3750  True Az=112.995  Ze=-37.935  Az status=0008  Ze status=0009
11:47:30 Check angles
11:47:30 SkyScan query
11:47:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.965<-13131  Statuses=0008 0009
11:47:30 Msec=4500  True Az=112.995  Ze=-16.965  Az status=0008  Ze status=0009
11:47:30 Check angles
11:47:30 SkyScan query
11:47:31 SkyScan query done: ret=0  az=112.995<-7533  ze=3.975<-11735  Statuses=0008 0009
11:47:31 Msec=5250  True Az=112.995  Ze=3.975  Az status=0008  Ze status=0009
11:47:31 Check angles
11:47:31 SkyScan query
11:47:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:47:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:47:32 Message to Master queued w/err=0: serial=192581 error=0
11:47:37 Received message from Master: op=Filter serial=192582
11:47:37 Color wheel filter change from 0 to 0
11:47:37 FLIGetFilterPos err=0  currentPosition=0
11:47:37 FLIGetStepsRemaining err=0  RemainingSteps=0
11:47:37 Filter is already there-color wheel unchanged
11:47:37 Received message from Master: op=Shutter serial=192583
11:47:37 Shutter LASER close
11:47:37 Received message from Camera: op=State serial=192585
11:47:37 GetSingleValue result=40  Value=cccccccc
11:47:37 SkyScan query
11:47:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:47:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:47:38 Parameters OK
11:47:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:47:38 Set A/D data flow result=40
11:47:38 Set A/D channel type result=40
11:47:38 Set A/D encoding result=40
11:47:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:47:38 Set channel filter=0.000000e+000  result=40
11:47:38 Config A/D  Result=40
11:47:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:47:38 Get A/D filter: -9.255963e+061  result=40
11:47:38 Get A/D value=-858993460  result=40
11:47:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:47:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:47:38 Parameters OK
11:47:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:47:38 Set A/D data flow result=40
11:47:38 Set A/D channel type result=40
11:47:38 Set A/D encoding result=40
11:47:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:47:38 Set channel filter=0.000000e+000  result=40
11:47:38 Config A/D  Result=40
11:47:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:47:38 Get A/D filter: -9.255963e+061  result=40
11:47:38 Get A/D value=-858993460  result=40
11:47:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:47:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:47:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:47:38 Aux=
11:47:38 Message to Camera, serial 192585 queued
11:48:14 Received message from Master: op=PointingHead serial=192598
11:48:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:48:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:48:15 Point started: ret=0
11:48:15 point_skyscan result=0
11:48:15 Check angles
11:48:15 SkyScan query
11:48:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:48:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:48:16 Message to Master queued w/err=0: serial=192598 error=0
11:48:21 Received message from Master: op=Filter serial=192599
11:48:21 Color wheel filter change from 0 to 0
11:48:21 FLIGetFilterPos err=0  currentPosition=0
11:48:21 FLIGetStepsRemaining err=0  RemainingSteps=0
11:48:21 Filter is already there-color wheel unchanged
11:48:21 Received message from Master: op=Shutter serial=192600
11:48:21 Shutter LASER close
11:48:21 Received message from Camera: op=State serial=192602
11:48:21 GetSingleValue result=40  Value=cccccccc
11:48:21 SkyScan query
11:48:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:48:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:48:22 Parameters OK
11:48:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:48:22 Set A/D data flow result=40
11:48:22 Set A/D channel type result=40
11:48:22 Set A/D encoding result=40
11:48:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:48:22 Set channel filter=0.000000e+000  result=40
11:48:22 Config A/D  Result=40
11:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:48:22 Get A/D filter: -9.255963e+061  result=40
11:48:22 Get A/D value=-858993460  result=40
11:48:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:48:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:48:22 Parameters OK
11:48:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:48:22 Set A/D data flow result=40
11:48:22 Set A/D channel type result=40
11:48:22 Set A/D encoding result=40
11:48:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:48:22 Set channel filter=0.000000e+000  result=40
11:48:22 Config A/D  Result=40
11:48:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:48:22 Get A/D filter: -9.255963e+061  result=40
11:48:22 Get A/D value=-858993460  result=40
11:48:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:48:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:48:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:48:22 Aux=
11:48:22 Message to Camera, serial 192602 queued
11:48:59 Received message from Master: op=PointingHead serial=192615
11:48:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:48:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:48:59 Point started: ret=0
11:48:59 point_skyscan result=0
11:49:00 Check angles
11:49:00 SkyScan query
11:49:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:49:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:49:00 Message to Master queued w/err=0: serial=192615 error=0
11:49:05 Received message from Master: op=Filter serial=192616
11:49:05 Color wheel filter change from 0 to 0
11:49:05 FLIGetFilterPos err=0  currentPosition=0
11:49:05 FLIGetStepsRemaining err=0  RemainingSteps=0
11:49:05 Filter is already there-color wheel unchanged
11:49:06 Received message from Master: op=Shutter serial=192617
11:49:06 Shutter LASER close
11:49:06 Received message from Camera: op=State serial=192619
11:49:06 GetSingleValue result=40  Value=cccccccc
11:49:06 SkyScan query
11:49:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:49:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:49:06 Parameters OK
11:49:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:49:06 Set A/D data flow result=40
11:49:06 Set A/D channel type result=40
11:49:06 Set A/D encoding result=40
11:49:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:49:06 Set channel filter=0.000000e+000  result=40
11:49:06 Config A/D  Result=40
11:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:49:06 Get A/D filter: -9.255963e+061  result=40
11:49:06 Get A/D value=-858993460  result=40
11:49:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:49:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:49:06 Parameters OK
11:49:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:49:06 Set A/D data flow result=40
11:49:06 Set A/D channel type result=40
11:49:06 Set A/D encoding result=40
11:49:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:49:06 Set channel filter=0.000000e+000  result=40
11:49:06 Config A/D  Result=40
11:49:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:49:06 Get A/D filter: -9.255963e+061  result=40
11:49:06 Get A/D value=-858993460  result=40
11:49:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:49:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:49:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:49:06 Aux=
11:49:06 Message to Camera, serial 192619 queued
11:49:43 Received message from Master: op=PointingHead serial=192632
11:49:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:49:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:49:43 Point started: ret=0
11:49:43 point_skyscan result=0
11:49:44 Check angles
11:49:44 SkyScan query
11:49:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:49:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:49:45 Message to Master queued w/err=0: serial=192632 error=0
11:49:50 Received message from Master: op=Filter serial=192633
11:49:50 Color wheel filter change from 0 to 0
11:49:50 FLIGetFilterPos err=0  currentPosition=0
11:49:50 FLIGetStepsRemaining err=0  RemainingSteps=0
11:49:50 Filter is already there-color wheel unchanged
11:49:50 Received message from Master: op=Shutter serial=192634
11:49:50 Shutter LASER close
11:49:50 Received message from Camera: op=State serial=192636
11:49:50 GetSingleValue result=40  Value=cccccccc
11:49:50 SkyScan query
11:49:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:49:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:49:50 Parameters OK
11:49:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:49:50 Set A/D data flow result=40
11:49:50 Set A/D channel type result=40
11:49:50 Set A/D encoding result=40
11:49:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:49:50 Set channel filter=0.000000e+000  result=40
11:49:50 Config A/D  Result=40
11:49:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:49:50 Get A/D filter: -9.255963e+061  result=40
11:49:50 Get A/D value=-858993460  result=40
11:49:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:49:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:49:50 Parameters OK
11:49:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:49:50 Set A/D data flow result=40
11:49:50 Set A/D channel type result=40
11:49:50 Set A/D encoding result=40
11:49:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:49:50 Set channel filter=0.000000e+000  result=40
11:49:50 Config A/D  Result=40
11:49:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:49:50 Get A/D filter: -9.255963e+061  result=40
11:49:50 Get A/D value=-858993460  result=40
11:49:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:49:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:49:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:49:50 Aux=
11:49:50 Message to Camera, serial 192636 queued
11:50:27 Received message from Master: op=PointingHead serial=192649
11:50:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:50:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:50:28 Point started: ret=0
11:50:28 point_skyscan result=0
11:50:28 Check angles
11:50:28 SkyScan query
11:50:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
11:50:29 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
11:50:29 Check angles
11:50:29 SkyScan query
11:50:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.325<-14955  Statuses=0008 0009
11:50:30 Msec=750  True Az=112.995  Ze=-44.325  Az status=0008  Ze status=0009
11:50:30 Check angles
11:50:30 SkyScan query
11:50:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.28<-16352  Statuses=0008 0009
11:50:30 Msec=1500  True Az=112.995  Ze=-65.28  Az status=0008  Ze status=0009
11:50:31 Check angles
11:50:31 SkyScan query
11:50:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.235<-17749  Statuses=0008 0009
11:50:31 Msec=2250  True Az=112.995  Ze=-86.235  Az status=0008  Ze status=0009
11:50:31 Check angles
11:50:31 SkyScan query
11:50:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.175<-19145  Statuses=0008 0009
11:50:32 Msec=3000  True Az=112.995  Ze=-107.175  Az status=0008  Ze status=0009
11:50:32 Check angles
11:50:32 SkyScan query
11:50:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.13<-20542  Statuses=0008 0009
11:50:33 Msec=3750  True Az=112.995  Ze=-128.13  Az status=0008  Ze status=0009
11:50:33 Check angles
11:50:33 SkyScan query
11:50:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.49<-21966  Statuses=0008 0009
11:50:33 Msec=4500  True Az=112.995  Ze=-149.49  Az status=0008  Ze status=0009
11:50:34 Check angles
11:50:34 SkyScan query
11:50:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.445<-23363  Statuses=0008 0009
11:50:34 Msec=5250  True Az=112.995  Ze=-170.445  Az status=0008  Ze status=0009
11:50:34 Check angles
11:50:34 SkyScan query
11:50:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:50:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:50:35 Message to Master queued w/err=0: serial=192649 error=0
11:50:40 Received message from Master: op=Filter serial=192650
11:50:40 Color wheel filter change from 0 to 0
11:50:40 FLIGetFilterPos err=0  currentPosition=0
11:50:40 FLIGetStepsRemaining err=0  RemainingSteps=0
11:50:40 Filter is already there-color wheel unchanged
11:50:40 Received message from Master: op=Shutter serial=192651
11:50:40 Shutter LASER open
11:50:40 Received message from Camera: op=State serial=192653
11:50:40 GetSingleValue result=40  Value=cccccccc
11:50:40 SkyScan query
11:50:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:50:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:50:41 Parameters OK
11:50:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:50:41 Set A/D data flow result=40
11:50:41 Set A/D channel type result=40
11:50:41 Set A/D encoding result=40
11:50:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:50:41 Set channel filter=0.000000e+000  result=40
11:50:41 Config A/D  Result=40
11:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:50:41 Get A/D filter: -9.255963e+061  result=40
11:50:41 Get A/D value=-858993460  result=40
11:50:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:50:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:50:41 Parameters OK
11:50:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:50:41 Set A/D data flow result=40
11:50:41 Set A/D channel type result=40
11:50:41 Set A/D encoding result=40
11:50:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:50:41 Set channel filter=0.000000e+000  result=40
11:50:41 Config A/D  Result=40
11:50:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:50:41 Get A/D filter: -9.255963e+061  result=40
11:50:41 Get A/D value=-858993460  result=40
11:50:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:50:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:50:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:50:41 Aux=
11:50:41 Message to Camera, serial 192653 queued
11:50:49 Received message from Master: op=Shutter serial=192663
11:50:49 Shutter LASER close
11:50:50 Received message from Master: op=PointingHead serial=192667
11:50:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:50:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:50:50 Point started: ret=0
11:50:50 point_skyscan result=0
11:50:51 Check angles
11:50:51 SkyScan query
11:50:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
11:50:52 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
11:50:52 Check angles
11:50:52 SkyScan query
11:50:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.16<-20144  Statuses=0008 0009
11:50:52 Msec=750  True Az=112.995  Ze=-122.16  Az status=0008  Ze status=0009
11:50:53 Check angles
11:50:53 SkyScan query
11:50:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.295<-18753  Statuses=0008 0009
11:50:53 Msec=1500  True Az=112.995  Ze=-101.295  Az status=0008  Ze status=0009
11:50:53 Check angles
11:50:53 SkyScan query
11:50:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.325<-17355  Statuses=0008 0009
11:50:54 Msec=2250  True Az=112.995  Ze=-80.325  Az status=0008  Ze status=0009
11:50:54 Check angles
11:50:54 SkyScan query
11:50:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.385<-15959  Statuses=0008 0009
11:50:55 Msec=3000  True Az=112.995  Ze=-59.385  Az status=0008  Ze status=0009
11:50:55 Check angles
11:50:55 SkyScan query
11:50:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.965<-14531  Statuses=0008 0009
11:50:55 Msec=3750  True Az=112.995  Ze=-37.965  Az status=0008  Ze status=0009
11:50:56 Check angles
11:50:56 SkyScan query
11:50:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.025<-13135  Statuses=0008 0009
11:50:56 Msec=4500  True Az=112.995  Ze=-17.025  Az status=0008  Ze status=0009
11:50:56 Check angles
11:50:56 SkyScan query
11:50:57 SkyScan query done: ret=0  az=112.995<-7533  ze=3.93<-11738  Statuses=0008 0009
11:50:57 Msec=5250  True Az=112.995  Ze=3.93  Az status=0008  Ze status=0009
11:50:57 Check angles
11:50:57 SkyScan query
11:50:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:50:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:50:58 Message to Master queued w/err=0: serial=192667 error=0
11:51:03 Received message from Master: op=Filter serial=192668
11:51:03 Color wheel filter change from 0 to 0
11:51:03 FLIGetFilterPos err=0  currentPosition=0
11:51:03 FLIGetStepsRemaining err=0  RemainingSteps=0
11:51:03 Filter is already there-color wheel unchanged
11:51:03 Received message from Master: op=Shutter serial=192669
11:51:03 Shutter LASER close
11:51:03 Received message from Camera: op=State serial=192671
11:51:03 GetSingleValue result=40  Value=cccccccc
11:51:03 SkyScan query
11:51:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:51:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:51:04 Parameters OK
11:51:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:51:04 Set A/D data flow result=40
11:51:04 Set A/D channel type result=40
11:51:04 Set A/D encoding result=40
11:51:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:51:04 Set channel filter=0.000000e+000  result=40
11:51:04 Config A/D  Result=40
11:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:51:04 Get A/D filter: -9.255963e+061  result=40
11:51:04 Get A/D value=-858993460  result=40
11:51:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:51:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:51:04 Parameters OK
11:51:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:51:04 Set A/D data flow result=40
11:51:04 Set A/D channel type result=40
11:51:04 Set A/D encoding result=40
11:51:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:51:04 Set channel filter=0.000000e+000  result=40
11:51:04 Config A/D  Result=40
11:51:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:51:04 Get A/D filter: -9.255963e+061  result=40
11:51:04 Get A/D value=-858993460  result=40
11:51:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:51:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:51:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:51:04 Aux=
11:51:04 Message to Camera, serial 192671 queued
11:51:39 Received message from Master: op=PointingHead serial=192683
11:51:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:51:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:51:40 Point started: ret=0
11:51:40 point_skyscan result=0
11:51:41 Check angles
11:51:41 SkyScan query
11:51:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:51:41 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:51:41 Message to Master queued w/err=0: serial=192683 error=0
11:51:46 Received message from Master: op=Filter serial=192684
11:51:46 Color wheel filter change from 0 to 0
11:51:46 FLIGetFilterPos err=0  currentPosition=0
11:51:46 FLIGetStepsRemaining err=0  RemainingSteps=0
11:51:46 Filter is already there-color wheel unchanged
11:51:46 Received message from Master: op=Shutter serial=192685
11:51:46 Shutter LASER close
11:51:46 Received message from Camera: op=State serial=192687
11:51:46 GetSingleValue result=40  Value=cccccccc
11:51:46 SkyScan query
11:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:51:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:51:47 Parameters OK
11:51:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:51:47 Set A/D data flow result=40
11:51:47 Set A/D channel type result=40
11:51:47 Set A/D encoding result=40
11:51:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:51:47 Set channel filter=0.000000e+000  result=40
11:51:47 Config A/D  Result=40
11:51:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:51:47 Get A/D filter: -9.255963e+061  result=40
11:51:47 Get A/D value=-858993460  result=40
11:51:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:51:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:51:47 Parameters OK
11:51:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:51:47 Set A/D data flow result=40
11:51:47 Set A/D channel type result=40
11:51:47 Set A/D encoding result=40
11:51:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:51:47 Set channel filter=0.000000e+000  result=40
11:51:47 Config A/D  Result=40
11:51:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:51:47 Get A/D filter: -9.255963e+061  result=40
11:51:47 Get A/D value=-858993460  result=40
11:51:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:51:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:51:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:51:47 Aux=
11:51:47 Message to Camera, serial 192687 queued
11:52:24 Received message from Master: op=PointingHead serial=192700
11:52:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:52:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:52:24 Point started: ret=0
11:52:24 point_skyscan result=0
11:52:25 Check angles
11:52:25 SkyScan query
11:52:25 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
11:52:25 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
11:52:26 Check angles
11:52:26 SkyScan query
11:52:26 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
11:52:26 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
11:52:26 Check angles
11:52:26 SkyScan query
11:52:27 SkyScan query done: ret=0  az=171.75<-11450  ze=-6.495<-12433  Statuses=0009 0008
11:52:27 Msec=1500  True Az=171.75  Ze=-6.495  Az status=0009  Ze status=0008
11:52:27 Check angles
11:52:27 SkyScan query
11:52:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:52:28 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:52:28 Message to Master queued w/err=0: serial=192700 error=0
11:52:33 Received message from Master: op=Filter serial=192701
11:52:33 Color wheel filter change from 0 to 0
11:52:33 FLIGetFilterPos err=0  currentPosition=0
11:52:33 FLIGetStepsRemaining err=0  RemainingSteps=0
11:52:33 Filter is already there-color wheel unchanged
11:52:33 Received message from Master: op=Shutter serial=192702
11:52:33 Shutter LASER close
11:52:33 Received message from Camera: op=State serial=192704
11:52:33 GetSingleValue result=40  Value=cccccccc
11:52:33 SkyScan query
11:52:33 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:52:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:52:33 Parameters OK
11:52:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:52:33 Set A/D data flow result=40
11:52:33 Set A/D channel type result=40
11:52:33 Set A/D encoding result=40
11:52:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:52:33 Set channel filter=0.000000e+000  result=40
11:52:33 Config A/D  Result=40
11:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:52:33 Get A/D filter: -9.255963e+061  result=40
11:52:33 Get A/D value=-858993460  result=40
11:52:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:52:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:52:33 Parameters OK
11:52:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:52:33 Set A/D data flow result=40
11:52:33 Set A/D channel type result=40
11:52:33 Set A/D encoding result=40
11:52:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:52:33 Set channel filter=0.000000e+000  result=40
11:52:33 Config A/D  Result=40
11:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:52:33 Get A/D filter: -9.255963e+061  result=40
11:52:33 Get A/D value=-858993460  result=40
11:52:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:52:33 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:52:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:52:33 Aux=
11:52:33 Message to Camera, serial 192704 queued
11:53:10 Received message from Master: op=PointingHead serial=192717
11:53:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:53:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:53:11 Point started: ret=0
11:53:11 point_skyscan result=0
11:53:11 Check angles
11:53:11 SkyScan query
11:53:12 SkyScan query done: ret=0  az=153.3<-10220  ze=6.51<-11566  Statuses=0009 0008
11:53:12 Msec=0  True Az=153.3  Ze=6.51  Az status=0009  Ze status=0008
11:53:12 Check angles
11:53:12 SkyScan query
11:53:13 SkyScan query done: ret=0  az=135.36<-9024  ze=6.495<-11567  Statuses=0009 0008
11:53:13 Msec=750  True Az=135.36  Ze=6.495  Az status=0009  Ze status=0008
11:53:13 Check angles
11:53:13 SkyScan query
11:53:14 SkyScan query done: ret=0  az=117.915<-7861  ze=6.495<-11567  Statuses=0009 0008
11:53:14 Msec=1500  True Az=117.915  Ze=6.495  Az status=0009  Ze status=0008
11:53:14 Check angles
11:53:14 SkyScan query
11:53:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:53:14 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:53:14 Message to Master queued w/err=0: serial=192717 error=0
11:53:19 Received message from Master: op=Filter serial=192718
11:53:19 Color wheel filter change from 0 to 0
11:53:19 FLIGetFilterPos err=0  currentPosition=0
11:53:19 FLIGetStepsRemaining err=0  RemainingSteps=0
11:53:19 Filter is already there-color wheel unchanged
11:53:19 Received message from Master: op=Shutter serial=192719
11:53:19 Shutter LASER close
11:53:19 Received message from Camera: op=State serial=192721
11:53:19 GetSingleValue result=40  Value=cccccccc
11:53:19 SkyScan query
11:53:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:53:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:53:20 Parameters OK
11:53:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:53:20 Set A/D data flow result=40
11:53:20 Set A/D channel type result=40
11:53:20 Set A/D encoding result=40
11:53:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:53:20 Set channel filter=0.000000e+000  result=40
11:53:20 Config A/D  Result=40
11:53:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:53:20 Get A/D filter: -9.255963e+061  result=40
11:53:20 Get A/D value=-858993460  result=40
11:53:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:53:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:53:20 Parameters OK
11:53:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:53:20 Set A/D data flow result=40
11:53:20 Set A/D channel type result=40
11:53:20 Set A/D encoding result=40
11:53:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:53:20 Set channel filter=0.000000e+000  result=40
11:53:20 Config A/D  Result=40
11:53:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:53:20 Get A/D filter: -9.255963e+061  result=40
11:53:20 Get A/D value=-858993460  result=40
11:53:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:53:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:53:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:53:20 Aux=
11:53:20 Message to Camera, serial 192721 queued
11:53:57 Received message from Master: op=PointingHead serial=192734
11:53:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:53:57 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:53:57 Point started: ret=0
11:53:57 point_skyscan result=0
11:53:58 Check angles
11:53:58 SkyScan query
11:53:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.295<-13553  Statuses=0008 0009
11:53:59 Msec=0  True Az=112.995  Ze=-23.295  Az status=0008  Ze status=0009
11:53:59 Check angles
11:53:59 SkyScan query
11:53:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.76<-14984  Statuses=0008 0009
11:53:59 Msec=750  True Az=112.995  Ze=-44.76  Az status=0008  Ze status=0009
11:54:00 Check angles
11:54:00 SkyScan query
11:54:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.64<-16376  Statuses=0008 0009
11:54:00 Msec=1500  True Az=112.995  Ze=-65.64  Az status=0008  Ze status=0009
11:54:00 Check angles
11:54:00 SkyScan query
11:54:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.595<-17773  Statuses=0008 0009
11:54:01 Msec=2250  True Az=112.995  Ze=-86.595  Az status=0008  Ze status=0009
11:54:01 Check angles
11:54:01 SkyScan query
11:54:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.985<-19199  Statuses=0008 0009
11:54:02 Msec=3000  True Az=112.995  Ze=-107.985  Az status=0008  Ze status=0009
11:54:02 Check angles
11:54:02 SkyScan query
11:54:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.925<-20595  Statuses=0008 0009
11:54:02 Msec=3750  True Az=112.995  Ze=-128.925  Az status=0008  Ze status=0009
11:54:03 Check angles
11:54:03 SkyScan query
11:54:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.88<-21992  Statuses=0008 0009
11:54:03 Msec=4500  True Az=112.995  Ze=-149.88  Az status=0008  Ze status=0009
11:54:03 Check angles
11:54:03 SkyScan query
11:54:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.12<-23408  Statuses=0008 0009
11:54:04 Msec=5250  True Az=112.995  Ze=-171.12  Az status=0008  Ze status=0009
11:54:04 Check angles
11:54:04 SkyScan query
11:54:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:54:05 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:54:05 Message to Master queued w/err=0: serial=192734 error=0
11:54:10 Received message from Master: op=Filter serial=192735
11:54:10 Color wheel filter change from 0 to 0
11:54:10 FLIGetFilterPos err=0  currentPosition=0
11:54:10 FLIGetStepsRemaining err=0  RemainingSteps=0
11:54:10 Filter is already there-color wheel unchanged
11:54:10 Received message from Master: op=Shutter serial=192736
11:54:10 Shutter LASER open
11:54:10 Received message from Camera: op=State serial=192738
11:54:10 GetSingleValue result=40  Value=cccccccc
11:54:10 SkyScan query
11:54:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:54:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:54:11 Parameters OK
11:54:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:54:11 Set A/D data flow result=40
11:54:11 Set A/D channel type result=40
11:54:11 Set A/D encoding result=40
11:54:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:54:11 Set channel filter=0.000000e+000  result=40
11:54:11 Config A/D  Result=40
11:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:54:11 Get A/D filter: -9.255963e+061  result=40
11:54:11 Get A/D value=-858993460  result=40
11:54:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:54:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:54:11 Parameters OK
11:54:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:54:11 Set A/D data flow result=40
11:54:11 Set A/D channel type result=40
[UTC 2019-3-9  11:54:11]
11:54:11 Set A/D encoding result=40
11:54:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:54:11 Set channel filter=0.000000e+000  result=40
11:54:11 Config A/D  Result=40
11:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:54:11 Get A/D filter: -9.255963e+061  result=40
11:54:11 Get A/D value=-858993460  result=40
11:54:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:54:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:54:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:54:11 Aux=
11:54:11 Message to Camera, serial 192738 queued
11:54:19 Received message from Master: op=Shutter serial=192748
11:54:19 Shutter LASER close
11:54:19 Received message from Master: op=PointingHead serial=192752
11:54:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:54:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:54:20 Point started: ret=0
11:54:20 point_skyscan result=0
11:54:21 Check angles
11:54:21 SkyScan query
11:54:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
11:54:21 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
11:54:21 Check angles
11:54:21 SkyScan query
11:54:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
11:54:22 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
11:54:22 Check angles
11:54:22 SkyScan query
11:54:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.265<-18751  Statuses=0008 0009
11:54:23 Msec=1500  True Az=112.995  Ze=-101.265  Az status=0008  Ze status=0009
11:54:23 Check angles
11:54:23 SkyScan query
11:54:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.235<-17349  Statuses=0008 0009
11:54:23 Msec=2250  True Az=112.995  Ze=-80.235  Az status=0008  Ze status=0009
11:54:24 Check angles
11:54:24 SkyScan query
11:54:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.37<-15958  Statuses=0008 0009
11:54:24 Msec=3000  True Az=112.995  Ze=-59.37  Az status=0008  Ze status=0009
11:54:24 Check angles
11:54:24 SkyScan query
11:54:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
11:54:25 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
11:54:25 Check angles
11:54:25 SkyScan query
11:54:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.995<-13133  Statuses=0008 0009
11:54:26 Msec=4500  True Az=112.995  Ze=-16.995  Az status=0008  Ze status=0009
11:54:26 Check angles
11:54:26 SkyScan query
11:54:26 SkyScan query done: ret=0  az=112.995<-7533  ze=4.32<-11712  Statuses=0008 0009
11:54:26 Msec=5250  True Az=112.995  Ze=4.32  Az status=0008  Ze status=0009
11:54:27 Check angles
11:54:27 SkyScan query
11:54:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:54:27 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:54:27 Message to Master queued w/err=0: serial=192752 error=0
11:54:32 Received message from Master: op=Filter serial=192753
11:54:32 Color wheel filter change from 0 to 0
11:54:32 FLIGetFilterPos err=0  currentPosition=0
11:54:32 FLIGetStepsRemaining err=0  RemainingSteps=0
11:54:32 Filter is already there-color wheel unchanged
11:54:32 Received message from Master: op=Shutter serial=192754
11:54:32 Shutter LASER close
11:54:32 Received message from Camera: op=State serial=192756
11:54:32 GetSingleValue result=40  Value=cccccccc
11:54:32 SkyScan query
11:54:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:54:33 Parameters OK
11:54:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:54:33 Set A/D data flow result=40
11:54:33 Set A/D channel type result=40
11:54:33 Set A/D encoding result=40
11:54:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:54:33 Set channel filter=0.000000e+000  result=40
11:54:33 Config A/D  Result=40
11:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:54:33 Get A/D filter: -9.255963e+061  result=40
11:54:33 Get A/D value=-858993460  result=40
11:54:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:54:33 Parameters OK
11:54:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:54:33 Set A/D data flow result=40
11:54:33 Set A/D channel type result=40
11:54:33 Set A/D encoding result=40
11:54:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:54:33 Set channel filter=0.000000e+000  result=40
11:54:33 Config A/D  Result=40
11:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:54:33 Get A/D filter: -9.255963e+061  result=40
11:54:33 Get A/D value=-858993460  result=40
11:54:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:54:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:54:33 Aux=
11:54:33 Message to Camera, serial 192756 queued
11:55:10 Received message from Master: op=PointingHead serial=192769
11:55:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:55:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:55:10 Point started: ret=0
11:55:10 point_skyscan result=0
11:55:11 Check angles
11:55:11 SkyScan query
11:55:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:55:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:55:12 Message to Master queued w/err=0: serial=192769 error=0
11:55:17 Received message from Master: op=Filter serial=192770
11:55:17 Color wheel filter change from 0 to 0
11:55:17 FLIGetFilterPos err=0  currentPosition=0
11:55:17 FLIGetStepsRemaining err=0  RemainingSteps=0
11:55:17 Filter is already there-color wheel unchanged
11:55:17 Received message from Master: op=Shutter serial=192771
11:55:17 Shutter LASER close
11:55:17 Received message from Camera: op=State serial=192773
11:55:17 GetSingleValue result=40  Value=cccccccc
11:55:17 SkyScan query
11:55:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:55:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:55:17 Parameters OK
11:55:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:55:17 Set A/D data flow result=40
11:55:17 Set A/D channel type result=40
11:55:17 Set A/D encoding result=40
11:55:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:55:17 Set channel filter=0.000000e+000  result=40
11:55:17 Config A/D  Result=40
11:55:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:55:17 Get A/D filter: -9.255963e+061  result=40
11:55:17 Get A/D value=-858993460  result=40
11:55:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:55:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:55:17 Parameters OK
11:55:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:55:17 Set A/D data flow result=40
11:55:17 Set A/D channel type result=40
11:55:17 Set A/D encoding result=40
11:55:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:55:17 Set channel filter=0.000000e+000  result=40
11:55:17 Config A/D  Result=40
11:55:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:55:17 Get A/D filter: -9.255963e+061  result=40
11:55:17 Get A/D value=-858993460  result=40
11:55:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:55:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:55:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:55:17 Aux=
11:55:17 Message to Camera, serial 192773 queued
11:55:54 Received message from Master: op=PointingHead serial=192786
11:55:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:55:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:55:55 Point started: ret=0
11:55:55 point_skyscan result=0
11:55:55 Check angles
11:55:55 SkyScan query
11:55:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:55:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:55:56 Message to Master queued w/err=0: serial=192786 error=0
11:56:01 Received message from Master: op=Filter serial=192787
11:56:01 Color wheel filter change from 0 to 0
11:56:01 FLIGetFilterPos err=0  currentPosition=0
11:56:01 FLIGetStepsRemaining err=0  RemainingSteps=0
11:56:01 Filter is already there-color wheel unchanged
11:56:01 Received message from Master: op=Shutter serial=192788
11:56:01 Shutter LASER close
11:56:01 Received message from Camera: op=State serial=192790
11:56:01 GetSingleValue result=40  Value=cccccccc
11:56:01 SkyScan query
11:56:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:56:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:56:02 Parameters OK
11:56:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:56:02 Set A/D data flow result=40
11:56:02 Set A/D channel type result=40
11:56:02 Set A/D encoding result=40
11:56:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:56:02 Set channel filter=0.000000e+000  result=40
11:56:02 Config A/D  Result=40
11:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:56:02 Get A/D filter: -9.255963e+061  result=40
11:56:02 Get A/D value=-858993460  result=40
11:56:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:56:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:56:02 Parameters OK
11:56:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:56:02 Set A/D data flow result=40
11:56:02 Set A/D channel type result=40
11:56:02 Set A/D encoding result=40
11:56:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:56:02 Set channel filter=0.000000e+000  result=40
11:56:02 Config A/D  Result=40
11:56:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:56:02 Get A/D filter: -9.255963e+061  result=40
11:56:02 Get A/D value=-858993460  result=40
11:56:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:56:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:56:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:56:02 Aux=
11:56:02 Message to Camera, serial 192790 queued
11:56:38 Received message from Master: op=PointingHead serial=192802
11:56:38 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:56:38 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:56:38 Point started: ret=0
11:56:38 point_skyscan result=0
11:56:39 Check angles
11:56:39 SkyScan query
11:56:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:56:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:56:39 Message to Master queued w/err=0: serial=192802 error=0
11:56:44 Received message from Master: op=Filter serial=192803
11:56:44 Color wheel filter change from 0 to 0
11:56:44 FLIGetFilterPos err=0  currentPosition=0
11:56:44 FLIGetStepsRemaining err=0  RemainingSteps=0
11:56:44 Filter is already there-color wheel unchanged
11:56:44 Received message from Master: op=Shutter serial=192804
11:56:44 Shutter LASER close
11:56:44 Received message from Camera: op=State serial=192806
11:56:44 GetSingleValue result=40  Value=cccccccc
11:56:44 SkyScan query
11:56:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:56:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:56:45 Parameters OK
11:56:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:56:45 Set A/D data flow result=40
11:56:45 Set A/D channel type result=40
11:56:45 Set A/D encoding result=40
11:56:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:56:45 Set channel filter=0.000000e+000  result=40
11:56:45 Config A/D  Result=40
11:56:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:56:45 Get A/D filter: -9.255963e+061  result=40
11:56:45 Get A/D value=-858993460  result=40
11:56:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:56:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:56:45 Parameters OK
11:56:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:56:45 Set A/D data flow result=40
11:56:45 Set A/D channel type result=40
11:56:45 Set A/D encoding result=40
11:56:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:56:45 Set channel filter=0.000000e+000  result=40
11:56:45 Config A/D  Result=40
11:56:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:56:45 Get A/D filter: -9.255963e+061  result=40
11:56:45 Get A/D value=-858993460  result=40
11:56:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:56:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:56:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:56:45 Aux=
11:56:45 Message to Camera, serial 192806 queued
11:57:22 Received message from Master: op=PointingHead serial=192819
11:57:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
11:57:22 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
11:57:22 Point started: ret=0
11:57:22 point_skyscan result=0
11:57:23 Check angles
11:57:23 SkyScan query
11:57:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
11:57:24 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
11:57:24 Check angles
11:57:24 SkyScan query
11:57:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
11:57:24 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
11:57:24 Check angles
11:57:24 SkyScan query
11:57:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.165<-16411  Statuses=0008 0009
11:57:25 Msec=1500  True Az=112.995  Ze=-66.165  Az status=0008  Ze status=0009
11:57:25 Check angles
11:57:25 SkyScan query
11:57:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.12<-17808  Statuses=0008 0009
11:57:26 Msec=2250  True Az=112.995  Ze=-87.12  Az status=0008  Ze status=0009
11:57:26 Check angles
11:57:26 SkyScan query
11:57:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.075<-19205  Statuses=0008 0009
11:57:27 Msec=3000  True Az=112.995  Ze=-108.075  Az status=0008  Ze status=0009
11:57:27 Check angles
11:57:27 SkyScan query
11:57:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.015<-20601  Statuses=0008 0009
11:57:27 Msec=3750  True Az=112.995  Ze=-129.015  Az status=0008  Ze status=0009
11:57:27 Check angles
11:57:27 SkyScan query
11:57:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.97<-21998  Statuses=0008 0009
11:57:28 Msec=4500  True Az=112.995  Ze=-149.97  Az status=0008  Ze status=0009
11:57:28 Check angles
11:57:28 SkyScan query
11:57:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.85<-23390  Statuses=0008 0009
11:57:29 Msec=5250  True Az=112.995  Ze=-170.85  Az status=0008  Ze status=0009
11:57:29 Check angles
11:57:29 SkyScan query
11:57:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
11:57:30 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
11:57:30 Message to Master queued w/err=0: serial=192819 error=0
11:57:35 Received message from Master: op=Filter serial=192820
11:57:35 Color wheel filter change from 0 to 0
11:57:35 FLIGetFilterPos err=0  currentPosition=0
11:57:35 FLIGetStepsRemaining err=0  RemainingSteps=0
11:57:35 Filter is already there-color wheel unchanged
11:57:35 Received message from Master: op=Shutter serial=192821
11:57:35 Shutter LASER open
11:57:35 Received message from Camera: op=State serial=192823
11:57:35 GetSingleValue result=40  Value=cccccccc
11:57:35 SkyScan query
11:57:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
11:57:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:57:35 Parameters OK
11:57:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:57:35 Set A/D data flow result=40
11:57:35 Set A/D channel type result=40
11:57:35 Set A/D encoding result=40
11:57:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:57:35 Set channel filter=0.000000e+000  result=40
11:57:35 Config A/D  Result=40
11:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:57:35 Get A/D filter: -9.255963e+061  result=40
11:57:35 Get A/D value=-858993460  result=40
11:57:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:57:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:57:35 Parameters OK
11:57:35 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:57:35 Set A/D data flow result=40
11:57:35 Set A/D channel type result=40
11:57:35 Set A/D encoding result=40
11:57:35 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:57:35 Set channel filter=0.000000e+000  result=40
11:57:35 Config A/D  Result=40
11:57:35 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:57:35 Get A/D filter: -9.255963e+061  result=40
11:57:35 Get A/D value=-858993460  result=40
11:57:35 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:57:35 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:57:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:57:35 Aux=
11:57:35 Message to Camera, serial 192823 queued
11:57:44 Received message from Master: op=Shutter serial=192833
11:57:44 Shutter LASER close
11:57:44 Received message from Master: op=PointingHead serial=192837
11:57:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:57:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:57:45 Point started: ret=0
11:57:45 point_skyscan result=0
11:57:46 Check angles
11:57:46 SkyScan query
11:57:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.505<-21567  Statuses=0008 0009
11:57:46 Msec=0  True Az=112.995  Ze=-143.505  Az status=0008  Ze status=0009
11:57:46 Check angles
11:57:46 SkyScan query
11:57:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.1<-20140  Statuses=0008 0009
11:57:47 Msec=750  True Az=112.995  Ze=-122.1  Az status=0008  Ze status=0009
11:57:47 Check angles
11:57:47 SkyScan query
11:57:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.16<-18744  Statuses=0008 0009
11:57:48 Msec=1500  True Az=112.995  Ze=-101.16  Az status=0008  Ze status=0009
11:57:48 Check angles
11:57:48 SkyScan query
11:57:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
11:57:48 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
11:57:49 Check angles
11:57:49 SkyScan query
11:57:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.25<-15950  Statuses=0008 0009
11:57:49 Msec=3000  True Az=112.995  Ze=-59.25  Az status=0008  Ze status=0009
11:57:49 Check angles
11:57:49 SkyScan query
11:57:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.28<-14552  Statuses=0008 0009
11:57:50 Msec=3750  True Az=112.995  Ze=-38.28  Az status=0008  Ze status=0009
11:57:50 Check angles
11:57:50 SkyScan query
11:57:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.34<-13156  Statuses=0008 0009
11:57:51 Msec=4500  True Az=112.995  Ze=-17.34  Az status=0008  Ze status=0009
11:57:51 Check angles
11:57:51 SkyScan query
11:57:51 SkyScan query done: ret=0  az=112.995<-7533  ze=3.63<-11758  Statuses=0008 0009
11:57:51 Msec=5250  True Az=112.995  Ze=3.63  Az status=0008  Ze status=0009
11:57:52 Check angles
11:57:52 SkyScan query
11:57:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
11:57:52 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
11:57:52 Message to Master queued w/err=0: serial=192837 error=0
11:57:57 Received message from Master: op=Filter serial=192838
11:57:57 Color wheel filter change from 0 to 0
11:57:57 FLIGetFilterPos err=0  currentPosition=0
11:57:57 FLIGetStepsRemaining err=0  RemainingSteps=0
11:57:57 Filter is already there-color wheel unchanged
11:57:57 Received message from Master: op=Shutter serial=192839
11:57:57 Shutter LASER close
11:57:58 Received message from Camera: op=State serial=192841
11:57:58 GetSingleValue result=40  Value=cccccccc
11:57:58 SkyScan query
11:57:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:57:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:57:58 Parameters OK
11:57:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:57:58 Set A/D data flow result=40
11:57:58 Set A/D channel type result=40
11:57:58 Set A/D encoding result=40
11:57:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:57:58 Set channel filter=0.000000e+000  result=40
11:57:58 Config A/D  Result=40
11:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:57:58 Get A/D filter: -9.255963e+061  result=40
11:57:58 Get A/D value=-858993460  result=40
11:57:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:57:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:57:58 Parameters OK
11:57:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:57:58 Set A/D data flow result=40
11:57:58 Set A/D channel type result=40
11:57:58 Set A/D encoding result=40
11:57:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:57:58 Set channel filter=0.000000e+000  result=40
11:57:58 Config A/D  Result=40
11:57:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:57:58 Get A/D filter: -9.255963e+061  result=40
11:57:58 Get A/D value=-858993460  result=40
11:57:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:57:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:57:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:57:58 Aux=
11:57:58 Message to Camera, serial 192841 queued
11:58:35 Received message from Master: op=PointingHead serial=192854
11:58:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
11:58:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
11:58:35 Point started: ret=0
11:58:35 point_skyscan result=0
11:58:36 Check angles
11:58:36 SkyScan query
11:58:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:58:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
11:58:37 Message to Master queued w/err=0: serial=192854 error=0
11:58:42 Received message from Master: op=Filter serial=192855
11:58:42 Color wheel filter change from 0 to 0
11:58:42 FLIGetFilterPos err=0  currentPosition=0
11:58:42 FLIGetStepsRemaining err=0  RemainingSteps=0
11:58:42 Filter is already there-color wheel unchanged
11:58:42 Received message from Master: op=Shutter serial=192856
11:58:42 Shutter LASER close
11:58:42 Received message from Camera: op=State serial=192858
11:58:42 GetSingleValue result=40  Value=cccccccc
11:58:42 SkyScan query
11:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
11:58:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:58:42 Parameters OK
11:58:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:58:42 Set A/D data flow result=40
11:58:42 Set A/D channel type result=40
11:58:42 Set A/D encoding result=40
11:58:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:58:42 Set channel filter=0.000000e+000  result=40
11:58:42 Config A/D  Result=40
11:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:58:42 Get A/D filter: -9.255963e+061  result=40
11:58:42 Get A/D value=-858993460  result=40
11:58:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:58:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:58:42 Parameters OK
11:58:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:58:42 Set A/D data flow result=40
11:58:42 Set A/D channel type result=40
11:58:42 Set A/D encoding result=40
11:58:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:58:42 Set channel filter=0.000000e+000  result=40
11:58:42 Config A/D  Result=40
11:58:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:58:42 Get A/D filter: -9.255963e+061  result=40
11:58:42 Get A/D value=-858993460  result=40
11:58:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:58:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:58:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:58:42 Aux=
11:58:42 Message to Camera, serial 192858 queued
11:59:19 Received message from Master: op=PointingHead serial=192871
11:59:19 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
11:59:19 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
11:59:20 Point started: ret=0
11:59:20 point_skyscan result=0
11:59:20 Check angles
11:59:20 SkyScan query
11:59:21 SkyScan query done: ret=0  az=136.185<-9079  ze=-6.51<-12434  Statuses=0009 0008
11:59:21 Msec=0  True Az=136.185  Ze=-6.51  Az status=0009  Ze status=0008
11:59:21 Check angles
11:59:21 SkyScan query
11:59:22 SkyScan query done: ret=0  az=153.645<-10243  ze=-6.495<-12433  Statuses=0009 0008
11:59:22 Msec=750  True Az=153.645  Ze=-6.495  Az status=0009  Ze status=0008
11:59:22 Check angles
11:59:22 SkyScan query
11:59:22 SkyScan query done: ret=0  az=171.135<-11409  ze=-6.495<-12433  Statuses=0009 0008
11:59:22 Msec=1500  True Az=171.135  Ze=-6.495  Az status=0009  Ze status=0008
11:59:23 Check angles
11:59:23 SkyScan query
11:59:23 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:59:23 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
11:59:23 Message to Master queued w/err=0: serial=192871 error=0
11:59:28 Received message from Master: op=Filter serial=192872
11:59:28 Color wheel filter change from 0 to 0
11:59:28 FLIGetFilterPos err=0  currentPosition=0
11:59:28 FLIGetStepsRemaining err=0  RemainingSteps=0
11:59:28 Filter is already there-color wheel unchanged
11:59:28 Received message from Master: op=Shutter serial=192873
11:59:28 Shutter LASER close
11:59:28 Received message from Camera: op=State serial=192875
11:59:28 GetSingleValue result=40  Value=cccccccc
11:59:28 SkyScan query
11:59:29 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
11:59:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:59:29 Parameters OK
11:59:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:59:29 Set A/D data flow result=40
11:59:29 Set A/D channel type result=40
11:59:29 Set A/D encoding result=40
11:59:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:59:29 Set channel filter=0.000000e+000  result=40
11:59:29 Config A/D  Result=40
11:59:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:59:29 Get A/D filter: -9.255963e+061  result=40
11:59:29 Get A/D value=-858993460  result=40
11:59:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:59:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
11:59:29 Parameters OK
11:59:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
11:59:29 Set A/D data flow result=40
11:59:29 Set A/D channel type result=40
11:59:29 Set A/D encoding result=40
11:59:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
11:59:29 Set channel filter=0.000000e+000  result=40
11:59:29 Config A/D  Result=40
11:59:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
11:59:29 Get A/D filter: -9.255963e+061  result=40
11:59:29 Get A/D value=-858993460  result=40
11:59:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
11:59:29 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
11:59:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
11:59:29 Aux=
11:59:29 Message to Camera, serial 192875 queued
12:00:06 Received message from Master: op=PointingHead serial=192888
12:00:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:00:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:00:06 Point started: ret=0
12:00:06 point_skyscan result=0
12:00:07 Check angles
12:00:07 SkyScan query
12:00:07 SkyScan query done: ret=0  az=153.225<-10215  ze=6.51<-11566  Statuses=0009 0008
12:00:07 Msec=0  True Az=153.225  Ze=6.51  Az status=0009  Ze status=0008
12:00:08 Check angles
12:00:08 SkyScan query
12:00:08 SkyScan query done: ret=0  az=135.795<-9053  ze=6.495<-11567  Statuses=0009 0008
12:00:08 Msec=750  True Az=135.795  Ze=6.495  Az status=0009  Ze status=0008
12:00:08 Check angles
12:00:08 SkyScan query
12:00:09 SkyScan query done: ret=0  az=118.26<-7884  ze=6.495<-11567  Statuses=0009 0008
12:00:09 Msec=1500  True Az=118.26  Ze=6.495  Az status=0009  Ze status=0008
12:00:09 Check angles
12:00:09 SkyScan query
12:00:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:00:10 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:00:10 Message to Master queued w/err=0: serial=192888 error=0
12:00:15 Received message from Master: op=Filter serial=192889
12:00:15 Color wheel filter change from 0 to 0
12:00:15 FLIGetFilterPos err=0  currentPosition=0
12:00:15 FLIGetStepsRemaining err=0  RemainingSteps=0
12:00:15 Filter is already there-color wheel unchanged
12:00:15 Received message from Master: op=Shutter serial=192890
12:00:15 Shutter LASER close
12:00:15 Received message from Camera: op=State serial=192892
12:00:15 GetSingleValue result=40  Value=cccccccc
12:00:15 SkyScan query
12:00:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:00:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:00:15 Parameters OK
12:00:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:00:15 Set A/D data flow result=40
12:00:15 Set A/D channel type result=40
12:00:15 Set A/D encoding result=40
12:00:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:00:15 Set channel filter=0.000000e+000  result=40
12:00:15 Config A/D  Result=40
12:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:00:15 Get A/D filter: -9.255963e+061  result=40
12:00:15 Get A/D value=-858993460  result=40
12:00:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:00:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:00:15 Parameters OK
12:00:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:00:15 Set A/D data flow result=40
12:00:15 Set A/D channel type result=40
12:00:15 Set A/D encoding result=40
12:00:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:00:15 Set channel filter=0.000000e+000  result=40
12:00:15 Config A/D  Result=40
12:00:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:00:15 Get A/D filter: -9.255963e+061  result=40
12:00:15 Get A/D value=-858993460  result=40
12:00:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:00:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:00:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:00:15 Aux=
12:00:15 Message to Camera, serial 192892 queued
12:00:52 Received message from Master: op=PointingHead serial=192905
12:00:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:00:52 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:00:53 Point started: ret=0
12:00:53 point_skyscan result=0
12:00:54 Check angles
12:00:54 SkyScan query
12:00:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
12:00:54 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
12:00:54 Check angles
12:00:54 SkyScan query
12:00:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.505<-14967  Statuses=0008 0009
12:00:55 Msec=750  True Az=112.995  Ze=-44.505  Az status=0008  Ze status=0009
12:00:55 Check angles
12:00:55 SkyScan query
12:00:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.315<-16421  Statuses=0008 0009
12:00:56 Msec=1500  True Az=112.995  Ze=-66.315  Az status=0008  Ze status=0009
12:00:56 Check angles
12:00:56 SkyScan query
12:00:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.27<-17818  Statuses=0008 0009
12:00:56 Msec=2250  True Az=112.995  Ze=-87.27  Az status=0008  Ze status=0009
12:00:57 Check angles
12:00:57 SkyScan query
12:00:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.645<-19243  Statuses=0008 0009
12:00:57 Msec=3000  True Az=112.995  Ze=-108.645  Az status=0008  Ze status=0009
12:00:57 Check angles
12:00:57 SkyScan query
12:00:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.615<-20641  Statuses=0008 0009
12:00:58 Msec=3750  True Az=112.995  Ze=-129.615  Az status=0008  Ze status=0009
12:00:58 Check angles
12:00:58 SkyScan query
12:00:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.975<-22065  Statuses=0008 0009
12:00:59 Msec=4500  True Az=112.995  Ze=-150.975  Az status=0008  Ze status=0009
12:00:59 Check angles
12:00:59 SkyScan query
12:00:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.885<-23459  Statuses=0008 0009
12:00:59 Msec=5250  True Az=112.995  Ze=-171.885  Az status=0008  Ze status=0009
12:01:00 Check angles
12:01:00 SkyScan query
12:01:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:01:00 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:01:00 Message to Master queued w/err=0: serial=192905 error=0
12:01:05 Received message from Master: op=Filter serial=192906
12:01:05 Color wheel filter change from 0 to 0
12:01:05 FLIGetFilterPos err=0  currentPosition=0
12:01:05 FLIGetStepsRemaining err=0  RemainingSteps=0
12:01:05 Filter is already there-color wheel unchanged
12:01:05 Received message from Master: op=Shutter serial=192907
12:01:05 Shutter LASER open
12:01:06 Received message from Camera: op=State serial=192909
12:01:06 GetSingleValue result=40  Value=cccccccc
12:01:06 SkyScan query
12:01:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:01:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:01:06 Parameters OK
12:01:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:01:06 Set A/D data flow result=40
12:01:06 Set A/D channel type result=40
12:01:06 Set A/D encoding result=40
12:01:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:01:06 Set channel filter=0.000000e+000  result=40
12:01:06 Config A/D  Result=40
12:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:01:06 Get A/D filter: -9.255963e+061  result=40
12:01:06 Get A/D value=-858993460  result=40
12:01:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:01:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:01:06 Parameters OK
12:01:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:01:06 Set A/D data flow result=40
12:01:06 Set A/D channel type result=40
12:01:06 Set A/D encoding result=40
12:01:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:01:06 Set channel filter=0.000000e+000  result=40
12:01:06 Config A/D  Result=40
12:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:01:06 Get A/D filter: -9.255963e+061  result=40
12:01:06 Get A/D value=-858993460  result=40
12:01:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:01:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:01:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:01:06 Aux=
12:01:06 Message to Camera, serial 192909 queued
12:01:14 Received message from Master: op=Shutter serial=192918
12:01:14 Shutter LASER close
12:01:14 Received message from Master: op=PointingHead serial=192922
12:01:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:01:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:01:14 Point started: ret=0
12:01:14 point_skyscan result=0
12:01:15 Check angles
12:01:15 SkyScan query
12:01:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
12:01:16 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
12:01:16 Check angles
12:01:16 SkyScan query
12:01:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
12:01:16 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
12:01:17 Check angles
12:01:17 SkyScan query
12:01:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.205<-18747  Statuses=0008 0009
12:01:17 Msec=1500  True Az=112.995  Ze=-101.205  Az status=0008  Ze status=0009
12:01:17 Check angles
12:01:17 SkyScan query
12:01:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.25<-17350  Statuses=0008 0009
12:01:18 Msec=2250  True Az=112.995  Ze=-80.25  Az status=0008  Ze status=0009
12:01:18 Check angles
12:01:18 SkyScan query
12:01:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.295<-15953  Statuses=0008 0009
12:01:19 Msec=3000  True Az=112.995  Ze=-59.295  Az status=0008  Ze status=0009
12:01:19 Check angles
12:01:19 SkyScan query
12:01:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.34<-14556  Statuses=0008 0009
12:01:19 Msec=3750  True Az=112.995  Ze=-38.34  Az status=0008  Ze status=0009
12:01:20 Check angles
12:01:20 SkyScan query
12:01:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.385<-13159  Statuses=0008 0009
12:01:20 Msec=4500  True Az=112.995  Ze=-17.385  Az status=0008  Ze status=0009
12:01:20 Check angles
12:01:20 SkyScan query
12:01:21 SkyScan query done: ret=0  az=112.995<-7533  ze=3.99<-11734  Statuses=0008 0009
12:01:21 Msec=5250  True Az=112.995  Ze=3.99  Az status=0008  Ze status=0009
12:01:21 Check angles
12:01:21 SkyScan query
12:01:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:01:22 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:01:22 Message to Master queued w/err=0: serial=192922 error=0
12:01:27 Received message from Master: op=Filter serial=192923
12:01:27 Color wheel filter change from 0 to 0
12:01:27 FLIGetFilterPos err=0  currentPosition=0
12:01:27 FLIGetStepsRemaining err=0  RemainingSteps=0
12:01:27 Filter is already there-color wheel unchanged
12:01:27 Received message from Master: op=Shutter serial=192924
12:01:27 Shutter LASER close
12:01:27 Received message from Camera: op=State serial=192926
12:01:27 GetSingleValue result=40  Value=cccccccc
12:01:27 SkyScan query
12:01:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:01:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:01:28 Parameters OK
12:01:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:01:28 Set A/D data flow result=40
12:01:28 Set A/D channel type result=40
12:01:28 Set A/D encoding result=40
12:01:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:01:28 Set channel filter=0.000000e+000  result=40
12:01:28 Config A/D  Result=40
12:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:01:28 Get A/D filter: -9.255963e+061  result=40
12:01:28 Get A/D value=-858993460  result=40
12:01:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:01:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:01:28 Parameters OK
12:01:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:01:28 Set A/D data flow result=40
12:01:28 Set A/D channel type result=40
12:01:28 Set A/D encoding result=40
12:01:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:01:28 Set channel filter=0.000000e+000  result=40
12:01:28 Config A/D  Result=40
12:01:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:01:28 Get A/D filter: -9.255963e+061  result=40
12:01:28 Get A/D value=-858993460  result=40
12:01:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:01:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:01:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:01:28 Aux=
12:01:28 Message to Camera, serial 192926 queued
12:02:04 Received message from Master: op=PointingHead serial=192939
12:02:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:02:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:02:05 Point started: ret=0
12:02:05 point_skyscan result=0
12:02:06 Check angles
12:02:06 SkyScan query
12:02:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:02:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:02:06 Message to Master queued w/err=0: serial=192939 error=0
12:02:11 Received message from Master: op=Filter serial=192940
12:02:11 Color wheel filter change from 0 to 0
12:02:11 FLIGetFilterPos err=0  currentPosition=0
12:02:11 FLIGetStepsRemaining err=0  RemainingSteps=0
12:02:11 Filter is already there-color wheel unchanged
12:02:11 Received message from Master: op=Shutter serial=192941
12:02:11 Shutter LASER close
12:02:11 Received message from Camera: op=State serial=192943
12:02:11 GetSingleValue result=40  Value=cccccccc
12:02:11 SkyScan query
12:02:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:02:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:02:12 Parameters OK
12:02:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:02:12 Set A/D data flow result=40
12:02:12 Set A/D channel type result=40
12:02:12 Set A/D encoding result=40
12:02:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:02:12 Set channel filter=0.000000e+000  result=40
12:02:12 Config A/D  Result=40
12:02:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:02:12 Get A/D filter: -9.255963e+061  result=40
12:02:12 Get A/D value=-858993460  result=40
12:02:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:02:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:02:12 Parameters OK
12:02:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:02:12 Set A/D data flow result=40
12:02:12 Set A/D channel type result=40
12:02:12 Set A/D encoding result=40
12:02:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:02:12 Set channel filter=0.000000e+000  result=40
12:02:12 Config A/D  Result=40
12:02:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:02:12 Get A/D filter: -9.255963e+061  result=40
12:02:12 Get A/D value=-858993460  result=40
12:02:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:02:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:02:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:02:12 Aux=
12:02:12 Message to Camera, serial 192943 queued
12:02:49 Received message from Master: op=PointingHead serial=192956
12:02:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:02:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:02:49 Point started: ret=0
12:02:49 point_skyscan result=0
12:02:50 Check angles
12:02:50 SkyScan query
12:02:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:02:50 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:02:50 Message to Master queued w/err=0: serial=192956 error=0
12:02:55 Received message from Master: op=Filter serial=192957
12:02:55 Color wheel filter change from 0 to 0
12:02:55 FLIGetFilterPos err=0  currentPosition=0
12:02:55 FLIGetStepsRemaining err=0  RemainingSteps=0
12:02:55 Filter is already there-color wheel unchanged
12:02:56 Received message from Master: op=Shutter serial=192958
12:02:56 Shutter LASER close
12:02:56 Received message from Camera: op=State serial=192960
12:02:56 GetSingleValue result=40  Value=cccccccc
12:02:56 SkyScan query
12:02:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:02:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:02:56 Parameters OK
12:02:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:02:56 Set A/D data flow result=40
12:02:56 Set A/D channel type result=40
12:02:56 Set A/D encoding result=40
12:02:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:02:56 Set channel filter=0.000000e+000  result=40
12:02:56 Config A/D  Result=40
12:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:02:56 Get A/D filter: -9.255963e+061  result=40
12:02:56 Get A/D value=-858993460  result=40
12:02:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:02:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:02:56 Parameters OK
12:02:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:02:56 Set A/D data flow result=40
12:02:56 Set A/D channel type result=40
12:02:56 Set A/D encoding result=40
12:02:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:02:56 Set channel filter=0.000000e+000  result=40
12:02:56 Config A/D  Result=40
12:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:02:56 Get A/D filter: -9.255963e+061  result=40
12:02:56 Get A/D value=-858993460  result=40
12:02:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:02:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:02:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:02:56 Aux=
12:02:56 Message to Camera, serial 192960 queued
12:03:33 Received message from Master: op=PointingHead serial=192973
12:03:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:03:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:03:33 Point started: ret=0
12:03:33 point_skyscan result=0
12:03:34 Check angles
12:03:34 SkyScan query
12:03:35 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:03:35 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:03:35 Message to Master queued w/err=0: serial=192973 error=0
12:03:36 Received message from Master: op=Identify serial=192974
12:03:40 Received message from Master: op=Filter serial=192977
12:03:40 Color wheel filter change from 0 to 0
12:03:40 FLIGetFilterPos err=0  currentPosition=0
12:03:40 FLIGetStepsRemaining err=0  RemainingSteps=0
12:03:40 Filter is already there-color wheel unchanged
12:03:40 Received message from Master: op=Shutter serial=192978
12:03:40 Shutter LASER close
12:03:40 Received message from Camera: op=State serial=192980
12:03:40 GetSingleValue result=40  Value=cccccccc
12:03:40 SkyScan query
12:03:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:03:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:03:41 Parameters OK
12:03:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:03:41 Set A/D data flow result=40
12:03:41 Set A/D channel type result=40
12:03:41 Set A/D encoding result=40
12:03:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:03:41 Set channel filter=0.000000e+000  result=40
12:03:41 Config A/D  Result=40
12:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:03:41 Get A/D filter: -9.255963e+061  result=40
12:03:41 Get A/D value=-858993460  result=40
12:03:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:03:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:03:41 Parameters OK
12:03:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:03:41 Set A/D data flow result=40
12:03:41 Set A/D channel type result=40
12:03:41 Set A/D encoding result=40
12:03:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:03:41 Set channel filter=0.000000e+000  result=40
12:03:41 Config A/D  Result=40
12:03:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:03:41 Get A/D filter: -9.255963e+061  result=40
12:03:41 Get A/D value=-858993460  result=40
12:03:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:03:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:03:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:03:41 Aux=
12:03:41 Message to Camera, serial 192980 queued
[UTC 2019-3-9  12:03:48]
12:04:17 Received message from Master: op=PointingHead serial=192993
12:04:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:04:17 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:04:18 Point started: ret=0
12:04:18 point_skyscan result=0
12:04:19 Check angles
12:04:19 SkyScan query
12:04:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
12:04:19 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
12:04:19 Check angles
12:04:19 SkyScan query
12:04:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.43<-14962  Statuses=0008 0009
12:04:20 Msec=750  True Az=112.995  Ze=-44.43  Az status=0008  Ze status=0009
12:04:20 Check angles
12:04:20 SkyScan query
12:04:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.805<-16387  Statuses=0008 0009
12:04:21 Msec=1500  True Az=112.995  Ze=-65.805  Az status=0008  Ze status=0009
12:04:21 Check angles
12:04:21 SkyScan query
12:04:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.76<-17784  Statuses=0008 0009
12:04:21 Msec=2250  True Az=112.995  Ze=-86.76  Az status=0008  Ze status=0009
12:04:22 Check angles
12:04:22 SkyScan query
12:04:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.715<-19181  Statuses=0008 0009
12:04:22 Msec=3000  True Az=112.995  Ze=-107.715  Az status=0008  Ze status=0009
12:04:22 Check angles
12:04:22 SkyScan query
12:04:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.075<-20605  Statuses=0008 0009
12:04:23 Msec=3750  True Az=112.995  Ze=-129.075  Az status=0008  Ze status=0009
12:04:23 Check angles
12:04:23 SkyScan query
12:04:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.03<-22002  Statuses=0008 0009
12:04:24 Msec=4500  True Az=112.995  Ze=-150.03  Az status=0008  Ze status=0009
12:04:24 Check angles
12:04:24 SkyScan query
12:04:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.91<-23394  Statuses=0008 0009
12:04:24 Msec=5250  True Az=112.995  Ze=-170.91  Az status=0008  Ze status=0009
12:04:25 Check angles
12:04:25 SkyScan query
12:04:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:04:25 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:04:25 Message to Master queued w/err=0: serial=192993 error=0
12:04:30 Received message from Master: op=Filter serial=192994
12:04:30 Color wheel filter change from 0 to 0
12:04:30 FLIGetFilterPos err=0  currentPosition=0
12:04:30 FLIGetStepsRemaining err=0  RemainingSteps=0
12:04:30 Filter is already there-color wheel unchanged
12:04:30 Received message from Master: op=Shutter serial=192995
12:04:30 Shutter LASER open
12:04:30 Received message from Camera: op=State serial=192997
12:04:30 GetSingleValue result=40  Value=cccccccc
12:04:30 SkyScan query
12:04:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:04:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:04:31 Parameters OK
12:04:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:04:31 Set A/D data flow result=40
12:04:31 Set A/D channel type result=40
12:04:31 Set A/D encoding result=40
12:04:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:04:31 Set channel filter=0.000000e+000  result=40
12:04:31 Config A/D  Result=40
12:04:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:04:31 Get A/D filter: -9.255963e+061  result=40
12:04:31 Get A/D value=-858993460  result=40
12:04:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:04:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:04:31 Parameters OK
12:04:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:04:31 Set A/D data flow result=40
12:04:31 Set A/D channel type result=40
12:04:31 Set A/D encoding result=40
12:04:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:04:31 Set channel filter=0.000000e+000  result=40
12:04:31 Config A/D  Result=40
12:04:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:04:31 Get A/D filter: -9.255963e+061  result=40
12:04:31 Get A/D value=-858993460  result=40
12:04:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:04:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:04:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:04:31 Aux=
12:04:31 Message to Camera, serial 192997 queued
12:04:39 Received message from Master: op=Shutter serial=193007
12:04:39 Shutter LASER close
12:04:40 Received message from Master: op=PointingHead serial=193011
12:04:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:04:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:04:40 Point started: ret=0
12:04:40 point_skyscan result=0
12:04:41 Check angles
12:04:41 SkyScan query
12:04:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
12:04:42 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
12:04:42 Check angles
12:04:42 SkyScan query
12:04:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.65<-20110  Statuses=0008 0009
12:04:43 Msec=750  True Az=112.995  Ze=-121.65  Az status=0008  Ze status=0009
12:04:43 Check angles
12:04:43 SkyScan query
12:04:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.71<-18714  Statuses=0008 0009
12:04:43 Msec=1500  True Az=112.995  Ze=-100.71  Az status=0008  Ze status=0009
12:04:43 Check angles
12:04:43 SkyScan query
12:04:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.755<-17317  Statuses=0008 0009
12:04:44 Msec=2250  True Az=112.995  Ze=-79.755  Az status=0008  Ze status=0009
12:04:44 Check angles
12:04:44 SkyScan query
12:04:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.815<-15921  Statuses=0008 0009
12:04:45 Msec=3000  True Az=112.995  Ze=-58.815  Az status=0008  Ze status=0009
12:04:45 Check angles
12:04:45 SkyScan query
12:04:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.845<-14523  Statuses=0008 0009
12:04:46 Msec=3750  True Az=112.995  Ze=-37.845  Az status=0008  Ze status=0009
12:04:46 Check angles
12:04:46 SkyScan query
12:04:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.875<-13125  Statuses=0008 0009
12:04:46 Msec=4500  True Az=112.995  Ze=-16.875  Az status=0008  Ze status=0009
12:04:46 Check angles
12:04:46 SkyScan query
12:04:47 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
12:04:47 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
12:04:47 Check angles
12:04:47 SkyScan query
12:04:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:04:48 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:04:48 Message to Master queued w/err=0: serial=193011 error=0
12:04:53 Received message from Master: op=Filter serial=193012
12:04:53 Color wheel filter change from 0 to 0
12:04:53 FLIGetFilterPos err=0  currentPosition=0
12:04:53 FLIGetStepsRemaining err=0  RemainingSteps=0
12:04:53 Filter is already there-color wheel unchanged
12:04:53 Received message from Master: op=Shutter serial=193013
12:04:53 Shutter LASER close
12:04:53 Received message from Camera: op=State serial=193015
12:04:53 GetSingleValue result=40  Value=cccccccc
12:04:53 SkyScan query
12:04:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:04:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:04:54 Parameters OK
12:04:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:04:54 Set A/D data flow result=40
12:04:54 Set A/D channel type result=40
12:04:54 Set A/D encoding result=40
12:04:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:04:54 Set channel filter=0.000000e+000  result=40
12:04:54 Config A/D  Result=40
12:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:04:54 Get A/D filter: -9.255963e+061  result=40
12:04:54 Get A/D value=-858993460  result=40
12:04:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:04:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:04:54 Parameters OK
12:04:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:04:54 Set A/D data flow result=40
12:04:54 Set A/D channel type result=40
12:04:54 Set A/D encoding result=40
12:04:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:04:54 Set channel filter=0.000000e+000  result=40
12:04:54 Config A/D  Result=40
12:04:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:04:54 Get A/D filter: -9.255963e+061  result=40
12:04:54 Get A/D value=-858993460  result=40
12:04:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:04:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:04:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:04:54 Aux=
12:04:54 Message to Camera, serial 193015 queued
12:05:31 Received message from Master: op=PointingHead serial=193028
12:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:05:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:05:31 Point started: ret=0
12:05:31 point_skyscan result=0
12:05:32 Check angles
12:05:32 SkyScan query
12:05:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:05:32 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:05:32 Message to Master queued w/err=0: serial=193028 error=0
12:05:37 Received message from Master: op=Filter serial=193029
12:05:37 Color wheel filter change from 0 to 0
12:05:37 FLIGetFilterPos err=0  currentPosition=0
12:05:37 FLIGetStepsRemaining err=0  RemainingSteps=0
12:05:37 Filter is already there-color wheel unchanged
12:05:37 Received message from Master: op=Shutter serial=193030
12:05:37 Shutter LASER close
12:05:38 Received message from Camera: op=State serial=193032
12:05:38 GetSingleValue result=40  Value=cccccccc
12:05:38 SkyScan query
12:05:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:05:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:05:38 Parameters OK
12:05:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:05:38 Set A/D data flow result=40
12:05:38 Set A/D channel type result=40
12:05:38 Set A/D encoding result=40
12:05:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:05:38 Set channel filter=0.000000e+000  result=40
12:05:38 Config A/D  Result=40
12:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:05:38 Get A/D filter: -9.255963e+061  result=40
12:05:38 Get A/D value=-858993460  result=40
12:05:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:05:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:05:38 Parameters OK
12:05:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:05:38 Set A/D data flow result=40
12:05:38 Set A/D channel type result=40
12:05:38 Set A/D encoding result=40
12:05:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:05:38 Set channel filter=0.000000e+000  result=40
12:05:38 Config A/D  Result=40
12:05:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:05:38 Get A/D filter: -9.255963e+061  result=40
12:05:38 Get A/D value=-858993460  result=40
12:05:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:05:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:05:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:05:38 Aux=
12:05:38 Message to Camera, serial 193032 queued
12:06:15 Received message from Master: op=PointingHead serial=193045
12:06:15 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:06:15 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:06:15 Point started: ret=0
12:06:15 point_skyscan result=0
12:06:16 Check angles
12:06:16 SkyScan query
12:06:17 SkyScan query done: ret=0  az=136.47<-9098  ze=-6.51<-12434  Statuses=0009 0008
12:06:17 Msec=0  True Az=136.47  Ze=-6.51  Az status=0009  Ze status=0008
12:06:17 Check angles
12:06:17 SkyScan query
12:06:17 SkyScan query done: ret=0  az=153.825<-10255  ze=-6.495<-12433  Statuses=0009 0008
12:06:17 Msec=750  True Az=153.825  Ze=-6.495  Az status=0009  Ze status=0008
12:06:18 Check angles
12:06:18 SkyScan query
12:06:18 SkyScan query done: ret=0  az=171.39<-11426  ze=-6.495<-12433  Statuses=0009 0008
12:06:18 Msec=1500  True Az=171.39  Ze=-6.495  Az status=0009  Ze status=0008
12:06:18 Check angles
12:06:18 SkyScan query
12:06:19 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:06:19 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:06:19 Message to Master queued w/err=0: serial=193045 error=0
12:06:24 Received message from Master: op=Filter serial=193046
12:06:24 Color wheel filter change from 0 to 0
12:06:24 FLIGetFilterPos err=0  currentPosition=0
12:06:24 FLIGetStepsRemaining err=0  RemainingSteps=0
12:06:24 Filter is already there-color wheel unchanged
12:06:24 Received message from Master: op=Shutter serial=193047
12:06:24 Shutter LASER close
12:06:24 Received message from Camera: op=State serial=193049
12:06:24 GetSingleValue result=40  Value=cccccccc
12:06:24 SkyScan query
12:06:25 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:06:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:06:25 Parameters OK
12:06:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:06:25 Set A/D data flow result=40
12:06:25 Set A/D channel type result=40
12:06:25 Set A/D encoding result=40
12:06:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:06:25 Set channel filter=0.000000e+000  result=40
12:06:25 Config A/D  Result=40
12:06:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:06:25 Get A/D filter: -9.255963e+061  result=40
12:06:25 Get A/D value=-858993460  result=40
12:06:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:06:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:06:25 Parameters OK
12:06:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:06:25 Set A/D data flow result=40
12:06:25 Set A/D channel type result=40
12:06:25 Set A/D encoding result=40
12:06:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:06:25 Set channel filter=0.000000e+000  result=40
12:06:25 Config A/D  Result=40
12:06:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:06:25 Get A/D filter: -9.255963e+061  result=40
12:06:25 Get A/D value=-858993460  result=40
12:06:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:06:25 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:06:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:06:25 Aux=
12:06:25 Message to Camera, serial 193049 queued
12:07:01 Received message from Master: op=PointingHead serial=193062
12:07:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:07:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:07:02 Point started: ret=0
12:07:02 point_skyscan result=0
12:07:03 Check angles
12:07:03 SkyScan query
12:07:03 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
12:07:03 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
12:07:03 Check angles
12:07:03 SkyScan query
12:07:04 SkyScan query done: ret=0  az=135.405<-9027  ze=6.495<-11567  Statuses=0009 0008
12:07:04 Msec=750  True Az=135.405  Ze=6.495  Az status=0009  Ze status=0008
12:07:04 Check angles
12:07:04 SkyScan query
12:07:05 SkyScan query done: ret=0  az=117.6<-7840  ze=6.495<-11567  Statuses=0009 0008
12:07:05 Msec=1500  True Az=117.6  Ze=6.495  Az status=0009  Ze status=0008
12:07:05 Check angles
12:07:05 SkyScan query
12:07:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:07:05 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:07:05 Message to Master queued w/err=0: serial=193062 error=0
12:07:10 Received message from Master: op=Filter serial=193063
12:07:10 Color wheel filter change from 0 to 0
12:07:10 FLIGetFilterPos err=0  currentPosition=0
12:07:10 FLIGetStepsRemaining err=0  RemainingSteps=0
12:07:10 Filter is already there-color wheel unchanged
12:07:11 Received message from Master: op=Shutter serial=193064
12:07:11 Shutter LASER close
12:07:11 Received message from Camera: op=State serial=193066
12:07:11 GetSingleValue result=40  Value=cccccccc
12:07:11 SkyScan query
12:07:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:07:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:07:11 Parameters OK
12:07:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:07:11 Set A/D data flow result=40
12:07:11 Set A/D channel type result=40
12:07:11 Set A/D encoding result=40
12:07:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:07:11 Set channel filter=0.000000e+000  result=40
12:07:11 Config A/D  Result=40
12:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:07:11 Get A/D filter: -9.255963e+061  result=40
12:07:11 Get A/D value=-858993460  result=40
12:07:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:07:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:07:11 Parameters OK
12:07:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:07:11 Set A/D data flow result=40
12:07:11 Set A/D channel type result=40
12:07:11 Set A/D encoding result=40
12:07:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:07:11 Set channel filter=0.000000e+000  result=40
12:07:11 Config A/D  Result=40
12:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:07:11 Get A/D filter: -9.255963e+061  result=40
12:07:11 Get A/D value=-858993460  result=40
12:07:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:07:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:07:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:07:11 Aux=
12:07:11 Message to Camera, serial 193066 queued
12:07:48 Received message from Master: op=PointingHead serial=193079
12:07:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:07:48 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:07:48 Point started: ret=0
12:07:48 point_skyscan result=0
12:07:49 Check angles
12:07:49 SkyScan query
12:07:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.79<-13586  Statuses=0008 0009
12:07:50 Msec=0  True Az=112.995  Ze=-23.79  Az status=0008  Ze status=0009
12:07:50 Check angles
12:07:50 SkyScan query
12:07:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.745<-14983  Statuses=0008 0009
12:07:50 Msec=750  True Az=112.995  Ze=-44.745  Az status=0008  Ze status=0009
12:07:51 Check angles
12:07:51 SkyScan query
12:07:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.685<-16379  Statuses=0008 0009
12:07:51 Msec=1500  True Az=112.995  Ze=-65.685  Az status=0008  Ze status=0009
12:07:51 Check angles
12:07:51 SkyScan query
12:07:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.075<-17805  Statuses=0008 0009
12:07:52 Msec=2250  True Az=112.995  Ze=-87.075  Az status=0008  Ze status=0009
12:07:52 Check angles
12:07:52 SkyScan query
12:07:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.45<-19230  Statuses=0008 0009
12:07:53 Msec=3000  True Az=112.995  Ze=-108.45  Az status=0008  Ze status=0009
12:07:53 Check angles
12:07:53 SkyScan query
12:07:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.42<-20628  Statuses=0008 0009
12:07:54 Msec=3750  True Az=112.995  Ze=-129.42  Az status=0008  Ze status=0009
12:07:54 Check angles
12:07:54 SkyScan query
12:07:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.795<-22053  Statuses=0008 0009
12:07:54 Msec=4500  True Az=112.995  Ze=-150.795  Az status=0008  Ze status=0009
12:07:54 Check angles
12:07:54 SkyScan query
12:07:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.765<-23451  Statuses=0008 0009
12:07:55 Msec=5250  True Az=112.995  Ze=-171.765  Az status=0008  Ze status=0009
12:07:55 Check angles
12:07:55 SkyScan query
12:07:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:07:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:07:56 Message to Master queued w/err=0: serial=193079 error=0
12:08:01 Received message from Master: op=Filter serial=193080
12:08:01 Color wheel filter change from 0 to 0
12:08:01 FLIGetFilterPos err=0  currentPosition=0
12:08:01 FLIGetStepsRemaining err=0  RemainingSteps=0
12:08:01 Filter is already there-color wheel unchanged
12:08:01 Received message from Master: op=Shutter serial=193081
12:08:01 Shutter LASER open
12:08:01 Received message from Camera: op=State serial=193083
12:08:01 GetSingleValue result=40  Value=cccccccc
12:08:01 SkyScan query
12:08:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:08:02 Parameters OK
12:08:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:08:02 Set A/D data flow result=40
12:08:02 Set A/D channel type result=40
12:08:02 Set A/D encoding result=40
12:08:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:08:02 Set channel filter=0.000000e+000  result=40
12:08:02 Config A/D  Result=40
12:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:08:02 Get A/D filter: -9.255963e+061  result=40
12:08:02 Get A/D value=-858993460  result=40
12:08:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:08:02 Parameters OK
12:08:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:08:02 Set A/D data flow result=40
12:08:02 Set A/D channel type result=40
12:08:02 Set A/D encoding result=40
12:08:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:08:02 Set channel filter=0.000000e+000  result=40
12:08:02 Config A/D  Result=40
12:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:08:02 Get A/D filter: -9.255963e+061  result=40
12:08:02 Get A/D value=-858993460  result=40
12:08:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:08:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:08:02 Aux=
12:08:02 Message to Camera, serial 193083 queued
12:08:10 Received message from Master: op=Shutter serial=193093
12:08:10 Shutter LASER close
12:08:11 Received message from Master: op=PointingHead serial=193097
12:08:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:08:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:08:11 Point started: ret=0
12:08:11 point_skyscan result=0
12:08:12 Check angles
12:08:12 SkyScan query
12:08:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
12:08:12 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
12:08:12 Check angles
12:08:12 SkyScan query
12:08:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
12:08:13 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
12:08:13 Check angles
12:08:13 SkyScan query
12:08:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.205<-18747  Statuses=0008 0009
12:08:14 Msec=1500  True Az=112.995  Ze=-101.205  Az status=0008  Ze status=0009
12:08:14 Check angles
12:08:14 SkyScan query
12:08:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.25<-17350  Statuses=0008 0009
12:08:15 Msec=2250  True Az=112.995  Ze=-80.25  Az status=0008  Ze status=0009
12:08:15 Check angles
12:08:15 SkyScan query
12:08:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
12:08:15 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
12:08:15 Check angles
12:08:15 SkyScan query
12:08:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.89<-14526  Statuses=0008 0009
12:08:16 Msec=3750  True Az=112.995  Ze=-37.89  Az status=0008  Ze status=0009
12:08:16 Check angles
12:08:16 SkyScan query
12:08:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.935<-13129  Statuses=0008 0009
12:08:17 Msec=4500  True Az=112.995  Ze=-16.935  Az status=0008  Ze status=0009
12:08:17 Check angles
12:08:17 SkyScan query
12:08:18 SkyScan query done: ret=0  az=112.995<-7533  ze=4.38<-11708  Statuses=0008 0009
12:08:18 Msec=5250  True Az=112.995  Ze=4.38  Az status=0008  Ze status=0009
12:08:18 Check angles
12:08:18 SkyScan query
12:08:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:08:18 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:08:18 Message to Master queued w/err=0: serial=193097 error=0
12:08:23 Received message from Master: op=Filter serial=193098
12:08:23 Color wheel filter change from 0 to 0
12:08:23 FLIGetFilterPos err=0  currentPosition=0
12:08:23 FLIGetStepsRemaining err=0  RemainingSteps=0
12:08:23 Filter is already there-color wheel unchanged
12:08:23 Received message from Master: op=Shutter serial=193099
12:08:23 Shutter LASER close
12:08:24 Received message from Camera: op=State serial=193101
12:08:24 GetSingleValue result=40  Value=cccccccc
12:08:24 SkyScan query
12:08:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:08:24 Parameters OK
12:08:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:08:24 Set A/D data flow result=40
12:08:24 Set A/D channel type result=40
12:08:24 Set A/D encoding result=40
12:08:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:08:24 Set channel filter=0.000000e+000  result=40
12:08:24 Config A/D  Result=40
12:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:08:24 Get A/D filter: -9.255963e+061  result=40
12:08:24 Get A/D value=-858993460  result=40
12:08:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:08:24 Parameters OK
12:08:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:08:24 Set A/D data flow result=40
12:08:24 Set A/D channel type result=40
12:08:24 Set A/D encoding result=40
12:08:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:08:24 Set channel filter=0.000000e+000  result=40
12:08:24 Config A/D  Result=40
12:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:08:24 Get A/D filter: -9.255963e+061  result=40
12:08:24 Get A/D value=-858993460  result=40
12:08:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:08:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:08:24 Aux=
12:08:24 Message to Camera, serial 193101 queued
12:09:01 Received message from Master: op=PointingHead serial=193114
12:09:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:09:01 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:09:01 Point started: ret=0
12:09:01 point_skyscan result=0
12:09:02 Check angles
12:09:02 SkyScan query
12:09:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:09:03 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:09:03 Message to Master queued w/err=0: serial=193114 error=0
12:09:08 Received message from Master: op=Filter serial=193115
12:09:08 Color wheel filter change from 0 to 0
12:09:08 FLIGetFilterPos err=0  currentPosition=0
12:09:08 FLIGetStepsRemaining err=0  RemainingSteps=0
12:09:08 Filter is already there-color wheel unchanged
12:09:08 Received message from Master: op=Shutter serial=193116
12:09:08 Shutter LASER close
12:09:08 Received message from Camera: op=State serial=193118
12:09:08 GetSingleValue result=40  Value=cccccccc
12:09:08 SkyScan query
12:09:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:09:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:09:08 Parameters OK
12:09:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:09:08 Set A/D data flow result=40
12:09:08 Set A/D channel type result=40
12:09:08 Set A/D encoding result=40
12:09:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:09:08 Set channel filter=0.000000e+000  result=40
12:09:08 Config A/D  Result=40
12:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:09:08 Get A/D filter: -9.255963e+061  result=40
12:09:08 Get A/D value=-858993460  result=40
12:09:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:09:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:09:08 Parameters OK
12:09:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:09:08 Set A/D data flow result=40
12:09:08 Set A/D channel type result=40
12:09:08 Set A/D encoding result=40
12:09:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:09:08 Set channel filter=0.000000e+000  result=40
12:09:08 Config A/D  Result=40
12:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:09:08 Get A/D filter: -9.255963e+061  result=40
12:09:08 Get A/D value=-858993460  result=40
12:09:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:09:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:09:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:09:08 Aux=
12:09:08 Message to Camera, serial 193118 queued
12:09:45 Received message from Master: op=PointingHead serial=193131
12:09:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:09:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:09:46 Point started: ret=0
12:09:46 point_skyscan result=0
12:09:46 Check angles
12:09:46 SkyScan query
12:09:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:09:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:09:47 Message to Master queued w/err=0: serial=193131 error=0
12:09:52 Received message from Master: op=Filter serial=193132
12:09:52 Color wheel filter change from 0 to 0
12:09:52 FLIGetFilterPos err=0  currentPosition=0
12:09:52 FLIGetStepsRemaining err=0  RemainingSteps=0
12:09:52 Filter is already there-color wheel unchanged
12:09:52 Received message from Master: op=Shutter serial=193133
12:09:52 Shutter LASER close
12:09:52 Received message from Camera: op=State serial=193135
12:09:52 GetSingleValue result=40  Value=cccccccc
12:09:52 SkyScan query
12:09:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:09:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:09:53 Parameters OK
12:09:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:09:53 Set A/D data flow result=40
12:09:53 Set A/D channel type result=40
12:09:53 Set A/D encoding result=40
12:09:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:09:53 Set channel filter=0.000000e+000  result=40
12:09:53 Config A/D  Result=40
12:09:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:09:53 Get A/D filter: -9.255963e+061  result=40
12:09:53 Get A/D value=-858993460  result=40
12:09:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:09:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:09:53 Parameters OK
12:09:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:09:53 Set A/D data flow result=40
12:09:53 Set A/D channel type result=40
12:09:53 Set A/D encoding result=40
12:09:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:09:53 Set channel filter=0.000000e+000  result=40
12:09:53 Config A/D  Result=40
12:09:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:09:53 Get A/D filter: -9.255963e+061  result=40
12:09:53 Get A/D value=-858993460  result=40
12:09:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:09:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:09:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:09:53 Aux=
12:09:53 Message to Camera, serial 193135 queued
12:10:29 Received message from Master: op=PointingHead serial=193147
12:10:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:10:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:10:29 Point started: ret=0
12:10:29 point_skyscan result=0
12:10:30 Check angles
12:10:30 SkyScan query
12:10:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:10:30 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:10:30 Message to Master queued w/err=0: serial=193147 error=0
12:10:35 Received message from Master: op=Filter serial=193148
12:10:35 Color wheel filter change from 0 to 0
12:10:35 FLIGetFilterPos err=0  currentPosition=0
12:10:35 FLIGetStepsRemaining err=0  RemainingSteps=0
12:10:35 Filter is already there-color wheel unchanged
12:10:36 Received message from Master: op=Shutter serial=193149
12:10:36 Shutter LASER close
12:10:36 Received message from Camera: op=State serial=193151
12:10:36 GetSingleValue result=40  Value=cccccccc
12:10:36 SkyScan query
12:10:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:10:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:10:36 Parameters OK
12:10:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:10:36 Set A/D data flow result=40
12:10:36 Set A/D channel type result=40
12:10:36 Set A/D encoding result=40
12:10:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:10:36 Set channel filter=0.000000e+000  result=40
12:10:36 Config A/D  Result=40
12:10:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:10:36 Get A/D filter: -9.255963e+061  result=40
12:10:36 Get A/D value=-858993460  result=40
12:10:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:10:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:10:36 Parameters OK
12:10:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:10:36 Set A/D data flow result=40
12:10:36 Set A/D channel type result=40
12:10:36 Set A/D encoding result=40
12:10:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:10:36 Set channel filter=0.000000e+000  result=40
12:10:36 Config A/D  Result=40
12:10:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:10:36 Get A/D filter: -9.255963e+061  result=40
12:10:36 Get A/D value=-858993460  result=40
12:10:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:10:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:10:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:10:36 Aux=
12:10:36 Message to Camera, serial 193151 queued
12:11:13 Received message from Master: op=PointingHead serial=193164
12:11:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:11:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:11:13 Point started: ret=0
12:11:13 point_skyscan result=0
12:11:14 Check angles
12:11:14 SkyScan query
12:11:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
12:11:15 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
12:11:15 Check angles
12:11:15 SkyScan query
12:11:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.505<-14967  Statuses=0008 0009
12:11:15 Msec=750  True Az=112.995  Ze=-44.505  Az status=0008  Ze status=0009
12:11:16 Check angles
12:11:16 SkyScan query
12:11:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.895<-16393  Statuses=0008 0009
12:11:16 Msec=1500  True Az=112.995  Ze=-65.895  Az status=0008  Ze status=0009
12:11:16 Check angles
12:11:16 SkyScan query
12:11:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
12:11:17 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
12:11:17 Check angles
12:11:17 SkyScan query
12:11:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.805<-19187  Statuses=0008 0009
12:11:18 Msec=3000  True Az=112.995  Ze=-107.805  Az status=0008  Ze status=0009
12:11:18 Check angles
12:11:18 SkyScan query
12:11:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.195<-20613  Statuses=0008 0009
12:11:18 Msec=3750  True Az=112.995  Ze=-129.195  Az status=0008  Ze status=0009
12:11:19 Check angles
12:11:19 SkyScan query
12:11:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.15<-22010  Statuses=0008 0009
12:11:19 Msec=4500  True Az=112.995  Ze=-150.15  Az status=0008  Ze status=0009
12:11:19 Check angles
12:11:19 SkyScan query
12:11:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.985<-23399  Statuses=0008 0009
12:11:20 Msec=5250  True Az=112.995  Ze=-170.985  Az status=0008  Ze status=0009
12:11:20 Check angles
12:11:20 SkyScan query
12:11:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:11:21 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:11:21 Message to Master queued w/err=0: serial=193164 error=0
12:11:26 Received message from Master: op=Filter serial=193165
12:11:26 Color wheel filter change from 0 to 0
12:11:26 FLIGetFilterPos err=0  currentPosition=0
12:11:26 FLIGetStepsRemaining err=0  RemainingSteps=0
12:11:26 Filter is already there-color wheel unchanged
12:11:26 Received message from Master: op=Shutter serial=193166
12:11:26 Shutter LASER open
12:11:26 Received message from Camera: op=State serial=193168
12:11:26 GetSingleValue result=40  Value=cccccccc
12:11:26 SkyScan query
12:11:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:11:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:11:27 Parameters OK
12:11:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:11:27 Set A/D data flow result=40
12:11:27 Set A/D channel type result=40
12:11:27 Set A/D encoding result=40
12:11:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:11:27 Set channel filter=0.000000e+000  result=40
12:11:27 Config A/D  Result=40
12:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:11:27 Get A/D filter: -9.255963e+061  result=40
12:11:27 Get A/D value=-858993460  result=40
12:11:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:11:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:11:27 Parameters OK
12:11:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:11:27 Set A/D data flow result=40
12:11:27 Set A/D channel type result=40
12:11:27 Set A/D encoding result=40
12:11:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:11:27 Set channel filter=0.000000e+000  result=40
12:11:27 Config A/D  Result=40
12:11:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:11:27 Get A/D filter: -9.255963e+061  result=40
12:11:27 Get A/D value=-858993460  result=40
12:11:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:11:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:11:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:11:27 Aux=
12:11:27 Message to Camera, serial 193168 queued
12:11:35 Received message from Master: op=Shutter serial=193178
12:11:35 Shutter LASER close
12:11:36 Received message from Master: op=PointingHead serial=193182
12:11:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:11:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:11:36 Point started: ret=0
12:11:36 point_skyscan result=0
12:11:37 Check angles
12:11:37 SkyScan query
12:11:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.235<-21549  Statuses=0008 0009
12:11:37 Msec=0  True Az=112.995  Ze=-143.235  Az status=0008  Ze status=0009
12:11:38 Check angles
12:11:38 SkyScan query
12:11:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.325<-20155  Statuses=0008 0009
12:11:38 Msec=750  True Az=112.995  Ze=-122.325  Az status=0008  Ze status=0009
12:11:38 Check angles
12:11:38 SkyScan query
12:11:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.37<-18758  Statuses=0008 0009
12:11:39 Msec=1500  True Az=112.995  Ze=-101.37  Az status=0008  Ze status=0009
12:11:39 Check angles
12:11:39 SkyScan query
12:11:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.4<-17360  Statuses=0008 0009
12:11:40 Msec=2250  True Az=112.995  Ze=-80.4  Az status=0008  Ze status=0009
12:11:40 Check angles
12:11:40 SkyScan query
12:11:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.04<-15936  Statuses=0008 0009
12:11:40 Msec=3000  True Az=112.995  Ze=-59.04  Az status=0008  Ze status=0009
12:11:41 Check angles
12:11:41 SkyScan query
12:11:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.055<-14537  Statuses=0008 0009
12:11:41 Msec=3750  True Az=112.995  Ze=-38.055  Az status=0008  Ze status=0009
12:11:41 Check angles
12:11:41 SkyScan query
12:11:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.115<-13141  Statuses=0008 0009
12:11:42 Msec=4500  True Az=112.995  Ze=-17.115  Az status=0008  Ze status=0009
12:11:42 Check angles
12:11:42 SkyScan query
12:11:43 SkyScan query done: ret=0  az=112.995<-7533  ze=4.245<-11717  Statuses=0008 0009
12:11:43 Msec=5250  True Az=112.995  Ze=4.245  Az status=0008  Ze status=0009
12:11:43 Check angles
12:11:43 SkyScan query
12:11:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:11:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:11:43 Message to Master queued w/err=0: serial=193182 error=0
12:11:48 Received message from Master: op=Filter serial=193183
12:11:48 Color wheel filter change from 0 to 0
12:11:48 FLIGetFilterPos err=0  currentPosition=0
12:11:48 FLIGetStepsRemaining err=0  RemainingSteps=0
12:11:48 Filter is already there-color wheel unchanged
12:11:49 Received message from Master: op=Shutter serial=193184
12:11:49 Shutter LASER close
12:11:49 Received message from Camera: op=State serial=193186
12:11:49 GetSingleValue result=40  Value=cccccccc
12:11:49 SkyScan query
12:11:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:11:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:11:49 Parameters OK
12:11:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:11:49 Set A/D data flow result=40
12:11:49 Set A/D channel type result=40
12:11:49 Set A/D encoding result=40
12:11:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:11:49 Set channel filter=0.000000e+000  result=40
12:11:49 Config A/D  Result=40
12:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:11:49 Get A/D filter: -9.255963e+061  result=40
12:11:49 Get A/D value=-858993460  result=40
12:11:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:11:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:11:49 Parameters OK
12:11:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:11:49 Set A/D data flow result=40
12:11:49 Set A/D channel type result=40
12:11:49 Set A/D encoding result=40
12:11:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:11:49 Set channel filter=0.000000e+000  result=40
12:11:49 Config A/D  Result=40
12:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:11:49 Get A/D filter: -9.255963e+061  result=40
12:11:49 Get A/D value=-858993460  result=40
12:11:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:11:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:11:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:11:49 Aux=
12:11:49 Message to Camera, serial 193186 queued
12:12:26 Received message from Master: op=PointingHead serial=193199
12:12:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:12:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:12:27 Point started: ret=0
12:12:27 point_skyscan result=0
12:12:27 Check angles
12:12:27 SkyScan query
12:12:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:12:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:12:28 Message to Master queued w/err=0: serial=193199 error=0
12:12:33 Received message from Master: op=Filter serial=193200
12:12:33 Color wheel filter change from 0 to 0
12:12:33 FLIGetFilterPos err=0  currentPosition=0
12:12:33 FLIGetStepsRemaining err=0  RemainingSteps=0
12:12:33 Filter is already there-color wheel unchanged
12:12:33 Received message from Master: op=Shutter serial=193201
12:12:33 Shutter LASER close
12:12:33 Received message from Camera: op=State serial=193203
12:12:33 GetSingleValue result=40  Value=cccccccc
12:12:33 SkyScan query
12:12:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:12:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:12:34 Parameters OK
12:12:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:12:34 Set A/D data flow result=40
12:12:34 Set A/D channel type result=40
12:12:34 Set A/D encoding result=40
12:12:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:12:34 Set channel filter=0.000000e+000  result=40
12:12:34 Config A/D  Result=40
12:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:12:34 Get A/D filter: -9.255963e+061  result=40
12:12:34 Get A/D value=-858993460  result=40
12:12:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:12:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:12:34 Parameters OK
12:12:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:12:34 Set A/D data flow result=40
12:12:34 Set A/D channel type result=40
12:12:34 Set A/D encoding result=40
12:12:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:12:34 Set channel filter=0.000000e+000  result=40
12:12:34 Config A/D  Result=40
12:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:12:34 Get A/D filter: -9.255963e+061  result=40
12:12:34 Get A/D value=-858993460  result=40
12:12:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:12:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:12:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:12:34 Aux=
12:12:34 Message to Camera, serial 193203 queued
12:13:10 Received message from Master: op=PointingHead serial=193216
12:13:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:13:10 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:13:11 Point started: ret=0
12:13:11 point_skyscan result=0
12:13:12 Check angles
12:13:12 SkyScan query
12:13:12 SkyScan query done: ret=0  az=136.17<-9078  ze=-6.51<-12434  Statuses=0009 0008
12:13:12 Msec=0  True Az=136.17  Ze=-6.51  Az status=0009  Ze status=0008
12:13:12 Check angles
12:13:12 SkyScan query
12:13:13 SkyScan query done: ret=0  az=153.525<-10235  ze=-6.495<-12433  Statuses=0009 0008
12:13:13 Msec=750  True Az=153.525  Ze=-6.495  Az status=0009  Ze status=0008
12:13:13 Check angles
12:13:13 SkyScan query
12:13:14 SkyScan query done: ret=0  az=171.42<-11428  ze=-6.495<-12433  Statuses=0009 0008
12:13:14 Msec=1500  True Az=171.42  Ze=-6.495  Az status=0009  Ze status=0008
12:13:14 Check angles
12:13:14 SkyScan query
12:13:14 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:13:14 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:13:14 Message to Master queued w/err=0: serial=193216 error=0
12:13:19 Received message from Master: op=Filter serial=193217
12:13:19 Color wheel filter change from 0 to 0
12:13:19 FLIGetFilterPos err=0  currentPosition=0
12:13:19 FLIGetStepsRemaining err=0  RemainingSteps=0
12:13:19 Filter is already there-color wheel unchanged
12:13:20 Received message from Master: op=Shutter serial=193218
12:13:20 Shutter LASER close
12:13:20 Received message from Camera: op=State serial=193220
12:13:20 GetSingleValue result=40  Value=cccccccc
12:13:20 SkyScan query
12:13:20 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:13:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:13:20 Parameters OK
12:13:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:13:20 Set A/D data flow result=40
12:13:20 Set A/D channel type result=40
12:13:20 Set A/D encoding result=40
12:13:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:13:20 Set channel filter=0.000000e+000  result=40
12:13:20 Config A/D  Result=40
12:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:13:20 Get A/D filter: -9.255963e+061  result=40
12:13:20 Get A/D value=-858993460  result=40
12:13:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:13:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:13:20 Parameters OK
12:13:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:13:20 Set A/D data flow result=40
12:13:20 Set A/D channel type result=40
12:13:20 Set A/D encoding result=40
12:13:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:13:20 Set channel filter=0.000000e+000  result=40
12:13:20 Config A/D  Result=40
12:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:13:20 Get A/D filter: -9.255963e+061  result=40
12:13:20 Get A/D value=-858993460  result=40
12:13:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:13:20 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:13:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:13:20 Aux=
12:13:20 Message to Camera, serial 193220 queued
12:13:57 Received message from Master: op=PointingHead serial=193233
12:13:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:13:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:13:57 Point started: ret=0
12:13:57 point_skyscan result=0
12:13:58 Check angles
12:13:58 SkyScan query
12:13:59 SkyScan query done: ret=0  az=152.865<-10191  ze=6.51<-11566  Statuses=0009 0008
12:13:59 Msec=0  True Az=152.865  Ze=6.51  Az status=0009  Ze status=0008
12:13:59 Check angles
12:13:59 SkyScan query
12:13:59 SkyScan query done: ret=0  az=135.045<-9003  ze=6.495<-11567  Statuses=0009 0008
12:13:59 Msec=750  True Az=135.045  Ze=6.495  Az status=0009  Ze status=0008
12:14:00 Check angles
12:14:00 SkyScan query
12:14:00 SkyScan query done: ret=0  az=117.6<-7840  ze=6.495<-11567  Statuses=0009 0008
12:14:00 Msec=1500  True Az=117.6  Ze=6.495  Az status=0009  Ze status=0008
12:14:00 Check angles
12:14:00 SkyScan query
12:14:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:14:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:14:01 Message to Master queued w/err=0: serial=193233 error=0
12:14:06 Received message from Master: op=Filter serial=193234
12:14:06 Color wheel filter change from 0 to 0
12:14:06 FLIGetFilterPos err=0  currentPosition=0
12:14:06 FLIGetStepsRemaining err=0  RemainingSteps=0
12:14:06 Filter is already there-color wheel unchanged
12:14:06 Received message from Master: op=Shutter serial=193235
12:14:06 Shutter LASER close
12:14:06 Received message from Camera: op=State serial=193237
12:14:06 GetSingleValue result=40  Value=cccccccc
12:14:06 SkyScan query
12:14:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:14:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:14:07 Parameters OK
12:14:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:14:07 Set A/D data flow result=40
12:14:07 Set A/D channel type result=40
12:14:07 Set A/D encoding result=40
12:14:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:14:07 Set channel filter=0.000000e+000  result=40
12:14:07 Config A/D  Result=40
12:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:14:07 Get A/D filter: -9.255963e+061  result=40
12:14:07 Get A/D value=-858993460  result=40
12:14:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:14:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:14:07 Parameters OK
12:14:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:14:07 Set A/D data flow result=40
12:14:07 Set A/D channel type result=40
[UTC 2019-3-9  12:14:07]
12:14:07 Set A/D encoding result=40
12:14:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:14:07 Set channel filter=0.000000e+000  result=40
12:14:07 Config A/D  Result=40
12:14:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:14:07 Get A/D filter: -9.255963e+061  result=40
12:14:07 Get A/D value=-858993460  result=40
12:14:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:14:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:14:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:14:07 Aux=
12:14:07 Message to Camera, serial 193237 queued
12:14:44 Received message from Master: op=PointingHead serial=193250
12:14:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:14:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:14:44 Point started: ret=0
12:14:44 point_skyscan result=0
12:14:45 Check angles
12:14:45 SkyScan query
12:14:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
12:14:45 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
12:14:45 Check angles
12:14:45 SkyScan query
12:14:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.85<-14990  Statuses=0008 0009
12:14:46 Msec=750  True Az=112.995  Ze=-44.85  Az status=0008  Ze status=0009
12:14:46 Check angles
12:14:46 SkyScan query
12:14:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.805<-16387  Statuses=0008 0009
12:14:47 Msec=1500  True Az=112.995  Ze=-65.805  Az status=0008  Ze status=0009
12:14:47 Check angles
12:14:47 SkyScan query
12:14:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
12:14:47 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
12:14:48 Check angles
12:14:48 SkyScan query
12:14:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.7<-19180  Statuses=0008 0009
12:14:48 Msec=3000  True Az=112.995  Ze=-107.7  Az status=0008  Ze status=0009
12:14:48 Check angles
12:14:48 SkyScan query
12:14:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.64<-20576  Statuses=0008 0009
12:14:49 Msec=3750  True Az=112.995  Ze=-128.64  Az status=0008  Ze status=0009
12:14:49 Check angles
12:14:49 SkyScan query
12:14:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.045<-22003  Statuses=0008 0009
12:14:50 Msec=4500  True Az=112.995  Ze=-150.045  Az status=0008  Ze status=0009
12:14:50 Check angles
12:14:50 SkyScan query
12:14:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.895<-23393  Statuses=0008 0009
12:14:50 Msec=5250  True Az=112.995  Ze=-170.895  Az status=0008  Ze status=0009
12:14:51 Check angles
12:14:51 SkyScan query
12:14:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:14:51 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:14:51 Message to Master queued w/err=0: serial=193250 error=0
12:14:56 Received message from Master: op=Filter serial=193251
12:14:56 Color wheel filter change from 0 to 0
12:14:56 FLIGetFilterPos err=0  currentPosition=0
12:14:56 FLIGetStepsRemaining err=0  RemainingSteps=0
12:14:56 Filter is already there-color wheel unchanged
12:14:56 Received message from Master: op=Shutter serial=193252
12:14:56 Shutter LASER open
12:14:57 Received message from Camera: op=State serial=193254
12:14:57 GetSingleValue result=40  Value=cccccccc
12:14:57 SkyScan query
12:14:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:14:57 Parameters OK
12:14:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:14:57 Set A/D data flow result=40
12:14:57 Set A/D channel type result=40
12:14:57 Set A/D encoding result=40
12:14:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:14:57 Set channel filter=0.000000e+000  result=40
12:14:57 Config A/D  Result=40
12:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:14:57 Get A/D filter: -9.255963e+061  result=40
12:14:57 Get A/D value=-858993460  result=40
12:14:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:14:57 Parameters OK
12:14:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:14:57 Set A/D data flow result=40
12:14:57 Set A/D channel type result=40
12:14:57 Set A/D encoding result=40
12:14:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:14:57 Set channel filter=0.000000e+000  result=40
12:14:57 Config A/D  Result=40
12:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:14:57 Get A/D filter: -9.255963e+061  result=40
12:14:57 Get A/D value=-858993460  result=40
12:14:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:14:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:14:57 Aux=
12:14:57 Message to Camera, serial 193254 queued
12:15:06 Received message from Master: op=Shutter serial=193264
12:15:06 Shutter LASER close
12:15:06 Received message from Master: op=PointingHead serial=193268
12:15:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:15:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:15:06 Point started: ret=0
12:15:06 point_skyscan result=0
12:15:07 Check angles
12:15:07 SkyScan query
12:15:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
12:15:08 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
12:15:08 Check angles
12:15:08 SkyScan query
12:15:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.235<-20149  Statuses=0008 0009
12:15:09 Msec=750  True Az=112.995  Ze=-122.235  Az status=0008  Ze status=0009
12:15:09 Check angles
12:15:09 SkyScan query
12:15:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.295<-18753  Statuses=0008 0009
12:15:09 Msec=1500  True Az=112.995  Ze=-101.295  Az status=0008  Ze status=0009
12:15:09 Check angles
12:15:09 SkyScan query
12:15:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.905<-17327  Statuses=0008 0009
12:15:10 Msec=2250  True Az=112.995  Ze=-79.905  Az status=0008  Ze status=0009
12:15:10 Check angles
12:15:10 SkyScan query
12:15:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
12:15:11 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
12:15:11 Check angles
12:15:11 SkyScan query
12:15:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
12:15:12 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
12:15:12 Check angles
12:15:12 SkyScan query
12:15:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.025<-13135  Statuses=0008 0009
12:15:12 Msec=4500  True Az=112.995  Ze=-17.025  Az status=0008  Ze status=0009
12:15:12 Check angles
12:15:12 SkyScan query
12:15:13 SkyScan query done: ret=0  az=112.995<-7533  ze=3.93<-11738  Statuses=0008 0009
12:15:13 Msec=5250  True Az=112.995  Ze=3.93  Az status=0008  Ze status=0009
12:15:13 Check angles
12:15:13 SkyScan query
12:15:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:15:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:15:14 Message to Master queued w/err=0: serial=193268 error=0
12:15:19 Received message from Master: op=Filter serial=193269
12:15:19 Color wheel filter change from 0 to 0
12:15:19 FLIGetFilterPos err=0  currentPosition=0
12:15:19 FLIGetStepsRemaining err=0  RemainingSteps=0
12:15:19 Filter is already there-color wheel unchanged
12:15:19 Received message from Master: op=Shutter serial=193270
12:15:19 Shutter LASER close
12:15:19 Received message from Camera: op=State serial=193272
12:15:19 GetSingleValue result=40  Value=cccccccc
12:15:19 SkyScan query
12:15:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:15:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:15:20 Parameters OK
12:15:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:15:20 Set A/D data flow result=40
12:15:20 Set A/D channel type result=40
12:15:20 Set A/D encoding result=40
12:15:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:15:20 Set channel filter=0.000000e+000  result=40
12:15:20 Config A/D  Result=40
12:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:15:20 Get A/D filter: -9.255963e+061  result=40
12:15:20 Get A/D value=-858993460  result=40
12:15:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:15:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:15:20 Parameters OK
12:15:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:15:20 Set A/D data flow result=40
12:15:20 Set A/D channel type result=40
12:15:20 Set A/D encoding result=40
12:15:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:15:20 Set channel filter=0.000000e+000  result=40
12:15:20 Config A/D  Result=40
12:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:15:20 Get A/D filter: -9.255963e+061  result=40
12:15:20 Get A/D value=-858993460  result=40
12:15:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:15:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:15:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:15:20 Aux=
12:15:20 Message to Camera, serial 193272 queued
12:15:57 Received message from Master: op=PointingHead serial=193285
12:15:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:15:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:15:57 Point started: ret=0
12:15:57 point_skyscan result=0
12:15:58 Check angles
12:15:58 SkyScan query
12:15:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:15:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:15:58 Message to Master queued w/err=0: serial=193285 error=0
12:16:03 Received message from Master: op=Filter serial=193286
12:16:03 Color wheel filter change from 0 to 0
12:16:03 FLIGetFilterPos err=0  currentPosition=0
12:16:03 FLIGetStepsRemaining err=0  RemainingSteps=0
12:16:03 Filter is already there-color wheel unchanged
12:16:03 Received message from Master: op=Shutter serial=193287
12:16:03 Shutter LASER close
12:16:03 Received message from Camera: op=State serial=193289
12:16:03 GetSingleValue result=40  Value=cccccccc
12:16:03 SkyScan query
12:16:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:16:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:16:04 Parameters OK
12:16:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:16:04 Set A/D data flow result=40
12:16:04 Set A/D channel type result=40
12:16:04 Set A/D encoding result=40
12:16:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:16:04 Set channel filter=0.000000e+000  result=40
12:16:04 Config A/D  Result=40
12:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:16:04 Get A/D filter: -9.255963e+061  result=40
12:16:04 Get A/D value=-858993460  result=40
12:16:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:16:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:16:04 Parameters OK
12:16:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:16:04 Set A/D data flow result=40
12:16:04 Set A/D channel type result=40
12:16:04 Set A/D encoding result=40
12:16:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:16:04 Set channel filter=0.000000e+000  result=40
12:16:04 Config A/D  Result=40
12:16:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:16:04 Get A/D filter: -9.255963e+061  result=40
12:16:04 Get A/D value=-858993460  result=40
12:16:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:16:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:16:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:16:04 Aux=
12:16:04 Message to Camera, serial 193289 queued
12:16:41 Received message from Master: op=PointingHead serial=193302
12:16:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:16:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:16:41 Point started: ret=0
12:16:41 point_skyscan result=0
12:16:42 Check angles
12:16:42 SkyScan query
12:16:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:16:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:16:42 Message to Master queued w/err=0: serial=193302 error=0
12:16:47 Received message from Master: op=Filter serial=193303
12:16:47 Color wheel filter change from 0 to 0
12:16:47 FLIGetFilterPos err=0  currentPosition=0
12:16:47 FLIGetStepsRemaining err=0  RemainingSteps=0
12:16:47 Filter is already there-color wheel unchanged
12:16:48 Received message from Master: op=Shutter serial=193304
12:16:48 Shutter LASER close
12:16:48 Received message from Camera: op=State serial=193306
12:16:48 GetSingleValue result=40  Value=cccccccc
12:16:48 SkyScan query
12:16:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:16:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:16:48 Parameters OK
12:16:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:16:48 Set A/D data flow result=40
12:16:48 Set A/D channel type result=40
12:16:48 Set A/D encoding result=40
12:16:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:16:48 Set channel filter=0.000000e+000  result=40
12:16:48 Config A/D  Result=40
12:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:16:48 Get A/D filter: -9.255963e+061  result=40
12:16:48 Get A/D value=-858993460  result=40
12:16:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:16:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:16:48 Parameters OK
12:16:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:16:48 Set A/D data flow result=40
12:16:48 Set A/D channel type result=40
12:16:48 Set A/D encoding result=40
12:16:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:16:48 Set channel filter=0.000000e+000  result=40
12:16:48 Config A/D  Result=40
12:16:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:16:48 Get A/D filter: -9.255963e+061  result=40
12:16:48 Get A/D value=-858993460  result=40
12:16:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:16:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:16:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:16:48 Aux=
12:16:48 Message to Camera, serial 193306 queued
12:17:25 Received message from Master: op=PointingHead serial=193319
12:17:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:17:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:17:26 Point started: ret=0
12:17:26 point_skyscan result=0
12:17:26 Check angles
12:17:26 SkyScan query
12:17:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:17:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:17:27 Message to Master queued w/err=0: serial=193319 error=0
12:17:32 Received message from Master: op=Filter serial=193320
12:17:32 Color wheel filter change from 0 to 0
12:17:32 FLIGetFilterPos err=0  currentPosition=0
12:17:32 FLIGetStepsRemaining err=0  RemainingSteps=0
12:17:32 Filter is already there-color wheel unchanged
12:17:32 Received message from Master: op=Shutter serial=193321
12:17:32 Shutter LASER close
12:17:32 Received message from Camera: op=State serial=193323
12:17:32 GetSingleValue result=40  Value=cccccccc
12:17:32 SkyScan query
12:17:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:17:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:17:33 Parameters OK
12:17:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:17:33 Set A/D data flow result=40
12:17:33 Set A/D channel type result=40
12:17:33 Set A/D encoding result=40
12:17:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:17:33 Set channel filter=0.000000e+000  result=40
12:17:33 Config A/D  Result=40
12:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:17:33 Get A/D filter: -9.255963e+061  result=40
12:17:33 Get A/D value=-858993460  result=40
12:17:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:17:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:17:33 Parameters OK
12:17:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:17:33 Set A/D data flow result=40
12:17:33 Set A/D channel type result=40
12:17:33 Set A/D encoding result=40
12:17:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:17:33 Set channel filter=0.000000e+000  result=40
12:17:33 Config A/D  Result=40
12:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:17:33 Get A/D filter: -9.255963e+061  result=40
12:17:33 Get A/D value=-858993460  result=40
12:17:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:17:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:17:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:17:33 Aux=
12:17:33 Message to Camera, serial 193323 queued
12:18:09 Received message from Master: op=PointingHead serial=193336
12:18:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:18:09 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:18:10 Point started: ret=0
12:18:10 point_skyscan result=0
12:18:11 Check angles
12:18:11 SkyScan query
12:18:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.58<-13572  Statuses=0008 0009
12:18:11 Msec=0  True Az=112.995  Ze=-23.58  Az status=0008  Ze status=0009
12:18:11 Check angles
12:18:11 SkyScan query
12:18:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.985<-14999  Statuses=0008 0009
12:18:12 Msec=750  True Az=112.995  Ze=-44.985  Az status=0008  Ze status=0009
12:18:12 Check angles
12:18:12 SkyScan query
12:18:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.925<-16395  Statuses=0008 0009
12:18:13 Msec=1500  True Az=112.995  Ze=-65.925  Az status=0008  Ze status=0009
12:18:13 Check angles
12:18:13 SkyScan query
12:18:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.88<-17792  Statuses=0008 0009
12:18:13 Msec=2250  True Az=112.995  Ze=-86.88  Az status=0008  Ze status=0009
12:18:14 Check angles
12:18:14 SkyScan query
12:18:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.835<-19189  Statuses=0008 0009
12:18:14 Msec=3000  True Az=112.995  Ze=-107.835  Az status=0008  Ze status=0009
12:18:14 Check angles
12:18:14 SkyScan query
12:18:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.775<-20585  Statuses=0008 0009
12:18:15 Msec=3750  True Az=112.995  Ze=-128.775  Az status=0008  Ze status=0009
12:18:15 Check angles
12:18:15 SkyScan query
12:18:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.73<-21982  Statuses=0008 0009
12:18:16 Msec=4500  True Az=112.995  Ze=-149.73  Az status=0008  Ze status=0009
12:18:16 Check angles
12:18:16 SkyScan query
12:18:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.655<-23377  Statuses=0008 0009
12:18:16 Msec=5250  True Az=112.995  Ze=-170.655  Az status=0008  Ze status=0009
12:18:17 Check angles
12:18:17 SkyScan query
12:18:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:18:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:18:17 Message to Master queued w/err=0: serial=193336 error=0
12:18:22 Received message from Master: op=Filter serial=193337
12:18:22 Color wheel filter change from 0 to 0
12:18:22 FLIGetFilterPos err=0  currentPosition=0
12:18:22 FLIGetStepsRemaining err=0  RemainingSteps=0
12:18:22 Filter is already there-color wheel unchanged
12:18:22 Received message from Master: op=Shutter serial=193338
12:18:22 Shutter LASER open
12:18:23 Received message from Camera: op=State serial=193340
12:18:23 GetSingleValue result=40  Value=cccccccc
12:18:23 SkyScan query
12:18:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:18:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:18:23 Parameters OK
12:18:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:18:23 Set A/D data flow result=40
12:18:23 Set A/D channel type result=40
12:18:23 Set A/D encoding result=40
12:18:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:18:23 Set channel filter=0.000000e+000  result=40
12:18:23 Config A/D  Result=40
12:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:18:23 Get A/D filter: -9.255963e+061  result=40
12:18:23 Get A/D value=-858993460  result=40
12:18:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:18:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:18:23 Parameters OK
12:18:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:18:23 Set A/D data flow result=40
12:18:23 Set A/D channel type result=40
12:18:23 Set A/D encoding result=40
12:18:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:18:23 Set channel filter=0.000000e+000  result=40
12:18:23 Config A/D  Result=40
12:18:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:18:23 Get A/D filter: -9.255963e+061  result=40
12:18:23 Get A/D value=-858993460  result=40
12:18:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:18:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:18:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:18:23 Aux=
12:18:23 Message to Camera, serial 193340 queued
12:18:32 Received message from Master: op=Shutter serial=193350
12:18:32 Shutter LASER close
12:18:32 Received message from Master: op=PointingHead serial=193354
12:18:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:18:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:18:32 Point started: ret=0
12:18:32 point_skyscan result=0
12:18:33 Check angles
12:18:33 SkyScan query
12:18:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.1<-21540  Statuses=0008 0009
12:18:34 Msec=0  True Az=112.995  Ze=-143.1  Az status=0008  Ze status=0009
12:18:34 Check angles
12:18:34 SkyScan query
12:18:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
12:18:35 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
12:18:35 Check angles
12:18:35 SkyScan query
12:18:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.19<-18746  Statuses=0008 0009
12:18:35 Msec=1500  True Az=112.995  Ze=-101.19  Az status=0008  Ze status=0009
12:18:35 Check angles
12:18:35 SkyScan query
12:18:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.235<-17349  Statuses=0008 0009
12:18:36 Msec=2250  True Az=112.995  Ze=-80.235  Az status=0008  Ze status=0009
12:18:36 Check angles
12:18:36 SkyScan query
12:18:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.31<-15954  Statuses=0008 0009
12:18:37 Msec=3000  True Az=112.995  Ze=-59.31  Az status=0008  Ze status=0009
12:18:37 Check angles
12:18:37 SkyScan query
12:18:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.325<-14555  Statuses=0008 0009
12:18:38 Msec=3750  True Az=112.995  Ze=-38.325  Az status=0008  Ze status=0009
12:18:38 Check angles
12:18:38 SkyScan query
12:18:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.385<-13159  Statuses=0008 0009
12:18:38 Msec=4500  True Az=112.995  Ze=-17.385  Az status=0008  Ze status=0009
12:18:38 Check angles
12:18:38 SkyScan query
12:18:39 SkyScan query done: ret=0  az=112.995<-7533  ze=3.6<-11760  Statuses=0008 0009
12:18:39 Msec=5250  True Az=112.995  Ze=3.6  Az status=0008  Ze status=0009
12:18:39 Check angles
12:18:39 SkyScan query
12:18:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:18:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:18:40 Message to Master queued w/err=0: serial=193354 error=0
12:18:45 Received message from Master: op=Filter serial=193355
12:18:45 Color wheel filter change from 0 to 0
12:18:45 FLIGetFilterPos err=0  currentPosition=0
12:18:45 FLIGetStepsRemaining err=0  RemainingSteps=0
12:18:45 Filter is already there-color wheel unchanged
12:18:45 Received message from Master: op=Shutter serial=193356
12:18:45 Shutter LASER close
12:18:45 Received message from Camera: op=State serial=193358
12:18:45 GetSingleValue result=40  Value=cccccccc
12:18:45 SkyScan query
12:18:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:18:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:18:46 Parameters OK
12:18:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:18:46 Set A/D data flow result=40
12:18:46 Set A/D channel type result=40
12:18:46 Set A/D encoding result=40
12:18:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:18:46 Set channel filter=0.000000e+000  result=40
12:18:46 Config A/D  Result=40
12:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:18:46 Get A/D filter: -9.255963e+061  result=40
12:18:46 Get A/D value=-858993460  result=40
12:18:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:18:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:18:46 Parameters OK
12:18:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:18:46 Set A/D data flow result=40
12:18:46 Set A/D channel type result=40
12:18:46 Set A/D encoding result=40
12:18:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:18:46 Set channel filter=0.000000e+000  result=40
12:18:46 Config A/D  Result=40
12:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:18:46 Get A/D filter: -9.255963e+061  result=40
12:18:46 Get A/D value=-858993460  result=40
12:18:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:18:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:18:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:18:46 Aux=
12:18:46 Message to Camera, serial 193358 queued
12:19:23 Received message from Master: op=PointingHead serial=193371
12:19:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:19:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:19:23 Point started: ret=0
12:19:23 point_skyscan result=0
12:19:24 Check angles
12:19:24 SkyScan query
12:19:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:19:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:19:24 Message to Master queued w/err=0: serial=193371 error=0
12:19:29 Received message from Master: op=Filter serial=193372
12:19:29 Color wheel filter change from 0 to 0
12:19:29 FLIGetFilterPos err=0  currentPosition=0
12:19:29 FLIGetStepsRemaining err=0  RemainingSteps=0
12:19:29 Filter is already there-color wheel unchanged
12:19:29 Received message from Master: op=Shutter serial=193373
12:19:29 Shutter LASER close
12:19:29 Received message from Camera: op=State serial=193375
12:19:29 GetSingleValue result=40  Value=cccccccc
12:19:29 SkyScan query
12:19:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:19:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:19:30 Parameters OK
12:19:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:19:30 Set A/D data flow result=40
12:19:30 Set A/D channel type result=40
12:19:30 Set A/D encoding result=40
12:19:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:19:30 Set channel filter=0.000000e+000  result=40
12:19:30 Config A/D  Result=40
12:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:19:30 Get A/D filter: -9.255963e+061  result=40
12:19:30 Get A/D value=-858993460  result=40
12:19:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:19:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:19:30 Parameters OK
12:19:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:19:30 Set A/D data flow result=40
12:19:30 Set A/D channel type result=40
12:19:30 Set A/D encoding result=40
12:19:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:19:30 Set channel filter=0.000000e+000  result=40
12:19:30 Config A/D  Result=40
12:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:19:30 Get A/D filter: -9.255963e+061  result=40
12:19:30 Get A/D value=-858993460  result=40
12:19:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:19:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:19:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:19:30 Aux=
12:19:30 Message to Camera, serial 193375 queued
12:20:07 Received message from Master: op=PointingHead serial=193388
12:20:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:20:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:20:07 Point started: ret=0
12:20:07 point_skyscan result=0
12:20:08 Check angles
12:20:08 SkyScan query
12:20:09 SkyScan query done: ret=0  az=135.945<-9063  ze=-6.51<-12434  Statuses=0009 0008
12:20:09 Msec=0  True Az=135.945  Ze=-6.51  Az status=0009  Ze status=0008
12:20:09 Check angles
12:20:09 SkyScan query
12:20:09 SkyScan query done: ret=0  az=153.465<-10231  ze=-6.495<-12433  Statuses=0009 0008
12:20:09 Msec=750  True Az=153.465  Ze=-6.495  Az status=0009  Ze status=0008
12:20:10 Check angles
12:20:10 SkyScan query
12:20:10 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.495<-12433  Statuses=0009 0008
12:20:10 Msec=1500  True Az=171.3  Ze=-6.495  Az status=0009  Ze status=0008
12:20:10 Check angles
12:20:10 SkyScan query
12:20:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:20:11 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:20:11 Message to Master queued w/err=0: serial=193388 error=0
12:20:16 Received message from Master: op=Filter serial=193389
12:20:16 Color wheel filter change from 0 to 0
12:20:16 FLIGetFilterPos err=0  currentPosition=0
12:20:16 FLIGetStepsRemaining err=0  RemainingSteps=0
12:20:16 Filter is already there-color wheel unchanged
12:20:16 Received message from Master: op=Shutter serial=193390
12:20:16 Shutter LASER close
12:20:16 Received message from Camera: op=State serial=193392
12:20:16 GetSingleValue result=40  Value=cccccccc
12:20:16 SkyScan query
12:20:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:20:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:20:17 Parameters OK
12:20:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:20:17 Set A/D data flow result=40
12:20:17 Set A/D channel type result=40
12:20:17 Set A/D encoding result=40
12:20:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:20:17 Set channel filter=0.000000e+000  result=40
12:20:17 Config A/D  Result=40
12:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:20:17 Get A/D filter: -9.255963e+061  result=40
12:20:17 Get A/D value=-858993460  result=40
12:20:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:20:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:20:17 Parameters OK
12:20:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:20:17 Set A/D data flow result=40
12:20:17 Set A/D channel type result=40
12:20:17 Set A/D encoding result=40
12:20:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:20:17 Set channel filter=0.000000e+000  result=40
12:20:17 Config A/D  Result=40
12:20:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:20:17 Get A/D filter: -9.255963e+061  result=40
12:20:17 Get A/D value=-858993460  result=40
12:20:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:20:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:20:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:20:17 Aux=
12:20:17 Message to Camera, serial 193392 queued
12:20:53 Received message from Master: op=PointingHead serial=193405
12:20:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:20:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:20:54 Point started: ret=0
12:20:54 point_skyscan result=0
12:20:55 Check angles
12:20:55 SkyScan query
12:20:55 SkyScan query done: ret=0  az=153.18<-10212  ze=6.51<-11566  Statuses=0009 0008
12:20:55 Msec=0  True Az=153.18  Ze=6.51  Az status=0009  Ze status=0008
12:20:55 Check angles
12:20:55 SkyScan query
12:20:56 SkyScan query done: ret=0  az=135.345<-9023  ze=6.495<-11567  Statuses=0009 0008
12:20:56 Msec=750  True Az=135.345  Ze=6.495  Az status=0009  Ze status=0008
12:20:56 Check angles
12:20:56 SkyScan query
12:20:57 SkyScan query done: ret=0  az=117.78<-7852  ze=6.495<-11567  Statuses=0009 0008
12:20:57 Msec=1500  True Az=117.78  Ze=6.495  Az status=0009  Ze status=0008
12:20:57 Check angles
12:20:57 SkyScan query
12:20:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:20:57 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:20:57 Message to Master queued w/err=0: serial=193405 error=0
12:21:02 Received message from Master: op=Filter serial=193406
12:21:02 Color wheel filter change from 0 to 0
12:21:02 FLIGetFilterPos err=0  currentPosition=0
12:21:02 FLIGetStepsRemaining err=0  RemainingSteps=0
12:21:02 Filter is already there-color wheel unchanged
12:21:03 Received message from Master: op=Shutter serial=193407
12:21:03 Shutter LASER close
12:21:03 Received message from Camera: op=State serial=193409
12:21:03 GetSingleValue result=40  Value=cccccccc
12:21:03 SkyScan query
12:21:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:21:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:21:03 Parameters OK
12:21:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:21:03 Set A/D data flow result=40
12:21:03 Set A/D channel type result=40
12:21:03 Set A/D encoding result=40
12:21:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:21:03 Set channel filter=0.000000e+000  result=40
12:21:03 Config A/D  Result=40
12:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:21:03 Get A/D filter: -9.255963e+061  result=40
12:21:03 Get A/D value=-858993460  result=40
12:21:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:21:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:21:03 Parameters OK
12:21:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:21:03 Set A/D data flow result=40
12:21:03 Set A/D channel type result=40
12:21:03 Set A/D encoding result=40
12:21:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:21:03 Set channel filter=0.000000e+000  result=40
12:21:03 Config A/D  Result=40
12:21:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:21:03 Get A/D filter: -9.255963e+061  result=40
12:21:03 Get A/D value=-858993460  result=40
12:21:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:21:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:21:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:21:03 Aux=
12:21:03 Message to Camera, serial 193409 queued
12:21:40 Received message from Master: op=PointingHead serial=193422
12:21:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:21:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:21:40 Point started: ret=0
12:21:40 point_skyscan result=0
12:21:41 Check angles
12:21:41 SkyScan query
12:21:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.85<-13590  Statuses=0008 0009
12:21:42 Msec=0  True Az=112.995  Ze=-23.85  Az status=0008  Ze status=0009
12:21:42 Check angles
12:21:42 SkyScan query
12:21:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.21<-15014  Statuses=0008 0009
12:21:42 Msec=750  True Az=112.995  Ze=-45.21  Az status=0008  Ze status=0009
12:21:43 Check angles
12:21:43 SkyScan query
12:21:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.18<-16412  Statuses=0008 0009
12:21:43 Msec=1500  True Az=112.995  Ze=-66.18  Az status=0008  Ze status=0009
12:21:43 Check angles
12:21:43 SkyScan query
12:21:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.12<-17808  Statuses=0008 0009
12:21:44 Msec=2250  True Az=112.995  Ze=-87.12  Az status=0008  Ze status=0009
12:21:44 Check angles
12:21:44 SkyScan query
12:21:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.075<-19205  Statuses=0008 0009
12:21:45 Msec=3000  True Az=112.995  Ze=-108.075  Az status=0008  Ze status=0009
12:21:45 Check angles
12:21:45 SkyScan query
12:21:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.015<-20601  Statuses=0008 0009
12:21:45 Msec=3750  True Az=112.995  Ze=-129.015  Az status=0008  Ze status=0009
12:21:46 Check angles
12:21:46 SkyScan query
12:21:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.435<-22029  Statuses=0008 0009
12:21:46 Msec=4500  True Az=112.995  Ze=-150.435  Az status=0008  Ze status=0009
12:21:46 Check angles
12:21:46 SkyScan query
12:21:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.51<-23434  Statuses=0008 0009
12:21:47 Msec=5250  True Az=112.995  Ze=-171.51  Az status=0008  Ze status=0009
12:21:47 Check angles
12:21:47 SkyScan query
12:21:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:21:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:21:48 Message to Master queued w/err=0: serial=193422 error=0
12:21:53 Received message from Master: op=Filter serial=193423
12:21:53 Color wheel filter change from 0 to 0
12:21:53 FLIGetFilterPos err=0  currentPosition=0
12:21:53 FLIGetStepsRemaining err=0  RemainingSteps=0
12:21:53 Filter is already there-color wheel unchanged
12:21:53 Received message from Master: op=Shutter serial=193424
12:21:53 Shutter LASER open
12:21:53 Received message from Camera: op=State serial=193426
12:21:53 GetSingleValue result=40  Value=cccccccc
12:21:53 SkyScan query
12:21:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:21:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:21:54 Parameters OK
12:21:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:21:54 Set A/D data flow result=40
12:21:54 Set A/D channel type result=40
12:21:54 Set A/D encoding result=40
12:21:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:21:54 Set channel filter=0.000000e+000  result=40
12:21:54 Config A/D  Result=40
12:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:21:54 Get A/D filter: -9.255963e+061  result=40
12:21:54 Get A/D value=-858993460  result=40
12:21:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:21:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:21:54 Parameters OK
12:21:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:21:54 Set A/D data flow result=40
12:21:54 Set A/D channel type result=40
12:21:54 Set A/D encoding result=40
12:21:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:21:54 Set channel filter=0.000000e+000  result=40
12:21:54 Config A/D  Result=40
12:21:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:21:54 Get A/D filter: -9.255963e+061  result=40
12:21:54 Get A/D value=-858993460  result=40
12:21:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:21:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:21:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:21:54 Aux=
12:21:54 Message to Camera, serial 193426 queued
12:22:02 Received message from Master: op=Shutter serial=193436
12:22:02 Shutter LASER close
12:22:03 Received message from Master: op=PointingHead serial=193440
12:22:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:22:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:22:03 Point started: ret=0
12:22:03 point_skyscan result=0
12:22:04 Check angles
12:22:04 SkyScan query
12:22:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.325<-21555  Statuses=0008 0009
12:22:04 Msec=0  True Az=112.995  Ze=-143.325  Az status=0008  Ze status=0009
12:22:04 Check angles
12:22:04 SkyScan query
12:22:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.905<-20127  Statuses=0008 0009
12:22:05 Msec=750  True Az=112.995  Ze=-121.905  Az status=0008  Ze status=0009
12:22:05 Check angles
12:22:05 SkyScan query
12:22:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.98<-18732  Statuses=0008 0009
12:22:06 Msec=1500  True Az=112.995  Ze=-100.98  Az status=0008  Ze status=0009
12:22:06 Check angles
12:22:06 SkyScan query
12:22:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.04<-17336  Statuses=0008 0009
12:22:06 Msec=2250  True Az=112.995  Ze=-80.04  Az status=0008  Ze status=0009
12:22:07 Check angles
12:22:07 SkyScan query
12:22:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.635<-15909  Statuses=0008 0009
12:22:07 Msec=3000  True Az=112.995  Ze=-58.635  Az status=0008  Ze status=0009
12:22:07 Check angles
12:22:07 SkyScan query
12:22:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.68<-14512  Statuses=0008 0009
12:22:08 Msec=3750  True Az=112.995  Ze=-37.68  Az status=0008  Ze status=0009
12:22:08 Check angles
12:22:08 SkyScan query
12:22:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.71<-13114  Statuses=0008 0009
12:22:09 Msec=4500  True Az=112.995  Ze=-16.71  Az status=0008  Ze status=0009
12:22:09 Check angles
12:22:09 SkyScan query
12:22:09 SkyScan query done: ret=0  az=112.995<-7533  ze=4.545<-11697  Statuses=0008 0009
12:22:09 Msec=5250  True Az=112.995  Ze=4.545  Az status=0008  Ze status=0009
12:22:10 Check angles
12:22:10 SkyScan query
12:22:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:22:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:22:10 Message to Master queued w/err=0: serial=193440 error=0
12:22:15 Received message from Master: op=Filter serial=193441
12:22:15 Color wheel filter change from 0 to 0
12:22:15 FLIGetFilterPos err=0  currentPosition=0
12:22:15 FLIGetStepsRemaining err=0  RemainingSteps=0
12:22:15 Filter is already there-color wheel unchanged
12:22:15 Received message from Master: op=Shutter serial=193442
12:22:15 Shutter LASER close
12:22:16 Received message from Camera: op=State serial=193444
12:22:16 GetSingleValue result=40  Value=cccccccc
12:22:16 SkyScan query
12:22:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:22:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:22:16 Parameters OK
12:22:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:22:16 Set A/D data flow result=40
12:22:16 Set A/D channel type result=40
12:22:16 Set A/D encoding result=40
12:22:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:22:16 Set channel filter=0.000000e+000  result=40
12:22:16 Config A/D  Result=40
12:22:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:22:16 Get A/D filter: -9.255963e+061  result=40
12:22:16 Get A/D value=-858993460  result=40
12:22:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:22:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:22:16 Parameters OK
12:22:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:22:16 Set A/D data flow result=40
12:22:16 Set A/D channel type result=40
12:22:16 Set A/D encoding result=40
12:22:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:22:16 Set channel filter=0.000000e+000  result=40
12:22:16 Config A/D  Result=40
12:22:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:22:16 Get A/D filter: -9.255963e+061  result=40
12:22:16 Get A/D value=-858993460  result=40
12:22:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:22:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:22:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:22:16 Aux=
12:22:16 Message to Camera, serial 193444 queued
12:22:53 Received message from Master: op=PointingHead serial=193457
12:22:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:22:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:22:53 Point started: ret=0
12:22:53 point_skyscan result=0
12:22:54 Check angles
12:22:54 SkyScan query
12:22:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:22:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:22:55 Message to Master queued w/err=0: serial=193457 error=0
12:23:00 Received message from Master: op=Filter serial=193458
12:23:00 Color wheel filter change from 0 to 0
12:23:00 FLIGetFilterPos err=0  currentPosition=0
12:23:00 FLIGetStepsRemaining err=0  RemainingSteps=0
12:23:00 Filter is already there-color wheel unchanged
12:23:00 Received message from Master: op=Shutter serial=193459
12:23:00 Shutter LASER close
12:23:00 Received message from Camera: op=State serial=193461
12:23:00 GetSingleValue result=40  Value=cccccccc
12:23:00 SkyScan query
12:23:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:23:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:23:00 Parameters OK
12:23:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:23:00 Set A/D data flow result=40
12:23:00 Set A/D channel type result=40
12:23:00 Set A/D encoding result=40
12:23:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:23:00 Set channel filter=0.000000e+000  result=40
12:23:00 Config A/D  Result=40
12:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:23:00 Get A/D filter: -9.255963e+061  result=40
12:23:00 Get A/D value=-858993460  result=40
12:23:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:23:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:23:00 Parameters OK
12:23:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:23:00 Set A/D data flow result=40
12:23:00 Set A/D channel type result=40
12:23:00 Set A/D encoding result=40
12:23:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:23:00 Set channel filter=0.000000e+000  result=40
12:23:00 Config A/D  Result=40
12:23:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:23:00 Get A/D filter: -9.255963e+061  result=40
12:23:00 Get A/D value=-858993460  result=40
12:23:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:23:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:23:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:23:00 Aux=
12:23:00 Message to Camera, serial 193461 queued
12:23:37 Received message from Master: op=PointingHead serial=193474
12:23:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:23:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:23:38 Point started: ret=0
12:23:38 point_skyscan result=0
12:23:38 Check angles
12:23:38 SkyScan query
12:23:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:23:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:23:39 Message to Master queued w/err=0: serial=193474 error=0
12:23:44 Received message from Master: op=Filter serial=193475
12:23:44 Color wheel filter change from 0 to 0
12:23:44 FLIGetFilterPos err=0  currentPosition=0
12:23:44 FLIGetStepsRemaining err=0  RemainingSteps=0
12:23:44 Filter is already there-color wheel unchanged
12:23:44 Received message from Master: op=Shutter serial=193476
12:23:44 Shutter LASER close
12:23:44 Received message from Camera: op=State serial=193478
12:23:44 GetSingleValue result=40  Value=cccccccc
12:23:44 SkyScan query
12:23:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:23:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:23:45 Parameters OK
12:23:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:23:45 Set A/D data flow result=40
12:23:45 Set A/D channel type result=40
12:23:45 Set A/D encoding result=40
12:23:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:23:45 Set channel filter=0.000000e+000  result=40
12:23:45 Config A/D  Result=40
12:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:23:45 Get A/D filter: -9.255963e+061  result=40
12:23:45 Get A/D value=-858993460  result=40
12:23:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:23:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:23:45 Parameters OK
12:23:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:23:45 Set A/D data flow result=40
12:23:45 Set A/D channel type result=40
12:23:45 Set A/D encoding result=40
12:23:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:23:45 Set channel filter=0.000000e+000  result=40
12:23:45 Config A/D  Result=40
12:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:23:45 Get A/D filter: -9.255963e+061  result=40
12:23:45 Get A/D value=-858993460  result=40
12:23:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:23:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:23:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:23:45 Aux=
12:23:45 Message to Camera, serial 193478 queued
[UTC 2019-3-9  12:23:48]
12:24:22 Received message from Master: op=PointingHead serial=193491
12:24:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:24:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:24:22 Point started: ret=0
12:24:22 point_skyscan result=0
12:24:23 Check angles
12:24:23 SkyScan query
12:24:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:24:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:24:23 Message to Master queued w/err=0: serial=193491 error=0
12:24:28 Received message from Master: op=Filter serial=193492
12:24:28 Color wheel filter change from 0 to 0
12:24:28 FLIGetFilterPos err=0  currentPosition=0
12:24:28 FLIGetStepsRemaining err=0  RemainingSteps=0
12:24:28 Filter is already there-color wheel unchanged
12:24:29 Received message from Master: op=Shutter serial=193493
12:24:29 Shutter LASER close
12:24:29 Received message from Camera: op=State serial=193495
12:24:29 GetSingleValue result=40  Value=cccccccc
12:24:29 SkyScan query
12:24:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:24:29 Parameters OK
12:24:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:24:29 Set A/D data flow result=40
12:24:29 Set A/D channel type result=40
12:24:29 Set A/D encoding result=40
12:24:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:24:29 Set channel filter=0.000000e+000  result=40
12:24:29 Config A/D  Result=40
12:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:24:29 Get A/D filter: -9.255963e+061  result=40
12:24:29 Get A/D value=-858993460  result=40
12:24:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:24:29 Parameters OK
12:24:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:24:29 Set A/D data flow result=40
12:24:29 Set A/D channel type result=40
12:24:29 Set A/D encoding result=40
12:24:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:24:29 Set channel filter=0.000000e+000  result=40
12:24:29 Config A/D  Result=40
12:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:24:29 Get A/D filter: -9.255963e+061  result=40
12:24:29 Get A/D value=-858993460  result=40
12:24:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:24:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:24:29 Aux=
12:24:29 Message to Camera, serial 193495 queued
12:25:06 Received message from Master: op=PointingHead serial=193508
12:25:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:25:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:25:06 Point started: ret=0
12:25:06 point_skyscan result=0
12:25:07 Check angles
12:25:07 SkyScan query
12:25:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.55<-13570  Statuses=0008 0009
12:25:08 Msec=0  True Az=112.995  Ze=-23.55  Az status=0008  Ze status=0009
12:25:08 Check angles
12:25:08 SkyScan query
12:25:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.52<-14968  Statuses=0008 0009
12:25:08 Msec=750  True Az=112.995  Ze=-44.52  Az status=0008  Ze status=0009
12:25:09 Check angles
12:25:09 SkyScan query
12:25:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.46<-16364  Statuses=0008 0009
12:25:09 Msec=1500  True Az=112.995  Ze=-65.46  Az status=0008  Ze status=0009
12:25:09 Check angles
12:25:09 SkyScan query
12:25:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.415<-17761  Statuses=0008 0009
12:25:10 Msec=2250  True Az=112.995  Ze=-86.415  Az status=0008  Ze status=0009
12:25:10 Check angles
12:25:10 SkyScan query
12:25:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
12:25:11 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
12:25:11 Check angles
12:25:11 SkyScan query
12:25:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.31<-20554  Statuses=0008 0009
12:25:11 Msec=3750  True Az=112.995  Ze=-128.31  Az status=0008  Ze status=0009
12:25:12 Check angles
12:25:12 SkyScan query
12:25:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
12:25:12 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
12:25:12 Check angles
12:25:12 SkyScan query
12:25:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
12:25:13 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
12:25:13 Check angles
12:25:13 SkyScan query
12:25:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:25:14 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:25:14 Message to Master queued w/err=0: serial=193508 error=0
12:25:19 Received message from Master: op=Filter serial=193509
12:25:19 Color wheel filter change from 0 to 0
12:25:19 FLIGetFilterPos err=0  currentPosition=0
12:25:19 FLIGetStepsRemaining err=0  RemainingSteps=0
12:25:19 Filter is already there-color wheel unchanged
12:25:19 Received message from Master: op=Shutter serial=193510
12:25:19 Shutter LASER open
12:25:19 Received message from Camera: op=State serial=193512
12:25:19 GetSingleValue result=40  Value=cccccccc
12:25:19 SkyScan query
12:25:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:25:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:25:20 Parameters OK
12:25:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:25:20 Set A/D data flow result=40
12:25:20 Set A/D channel type result=40
12:25:20 Set A/D encoding result=40
12:25:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:25:20 Set channel filter=0.000000e+000  result=40
12:25:20 Config A/D  Result=40
12:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:25:20 Get A/D filter: -9.255963e+061  result=40
12:25:20 Get A/D value=-858993460  result=40
12:25:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:25:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:25:20 Parameters OK
12:25:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:25:20 Set A/D data flow result=40
12:25:20 Set A/D channel type result=40
12:25:20 Set A/D encoding result=40
12:25:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:25:20 Set channel filter=0.000000e+000  result=40
12:25:20 Config A/D  Result=40
12:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:25:20 Get A/D filter: -9.255963e+061  result=40
12:25:20 Get A/D value=-858993460  result=40
12:25:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:25:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:25:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:25:20 Aux=
12:25:20 Message to Camera, serial 193512 queued
12:25:28 Received message from Master: op=Shutter serial=193522
12:25:28 Shutter LASER close
12:25:29 Received message from Master: op=PointingHead serial=193526
12:25:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:25:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:25:29 Point started: ret=0
12:25:29 point_skyscan result=0
12:25:30 Check angles
12:25:30 SkyScan query
12:25:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.445<-21563  Statuses=0008 0009
12:25:30 Msec=0  True Az=112.995  Ze=-143.445  Az status=0008  Ze status=0009
12:25:30 Check angles
12:25:30 SkyScan query
12:25:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.49<-20166  Statuses=0008 0009
12:25:31 Msec=750  True Az=112.995  Ze=-122.49  Az status=0008  Ze status=0009
12:25:31 Check angles
12:25:31 SkyScan query
12:25:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.52<-18768  Statuses=0008 0009
12:25:32 Msec=1500  True Az=112.995  Ze=-101.52  Az status=0008  Ze status=0009
12:25:32 Check angles
12:25:32 SkyScan query
12:25:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.55<-17370  Statuses=0008 0009
12:25:33 Msec=2250  True Az=112.995  Ze=-80.55  Az status=0008  Ze status=0009
12:25:33 Check angles
12:25:33 SkyScan query
12:25:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.61<-15974  Statuses=0008 0009
12:25:33 Msec=3000  True Az=112.995  Ze=-59.61  Az status=0008  Ze status=0009
12:25:33 Check angles
12:25:33 SkyScan query
12:25:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.205<-14547  Statuses=0008 0009
12:25:34 Msec=3750  True Az=112.995  Ze=-38.205  Az status=0008  Ze status=0009
12:25:34 Check angles
12:25:34 SkyScan query
12:25:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
12:25:35 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
12:25:35 Check angles
12:25:35 SkyScan query
12:25:36 SkyScan query done: ret=0  az=112.995<-7533  ze=3.69<-11754  Statuses=0008 0009
12:25:36 Msec=5250  True Az=112.995  Ze=3.69  Az status=0008  Ze status=0009
12:25:36 Check angles
12:25:36 SkyScan query
12:25:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:25:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:25:36 Message to Master queued w/err=0: serial=193526 error=0
12:25:41 Received message from Master: op=Filter serial=193527
12:25:41 Color wheel filter change from 0 to 0
12:25:41 FLIGetFilterPos err=0  currentPosition=0
12:25:41 FLIGetStepsRemaining err=0  RemainingSteps=0
12:25:41 Filter is already there-color wheel unchanged
12:25:41 Received message from Master: op=Shutter serial=193528
12:25:41 Shutter LASER close
12:25:42 Received message from Camera: op=State serial=193530
12:25:42 GetSingleValue result=40  Value=cccccccc
12:25:42 SkyScan query
12:25:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:25:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:25:42 Parameters OK
12:25:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:25:42 Set A/D data flow result=40
12:25:42 Set A/D channel type result=40
12:25:42 Set A/D encoding result=40
12:25:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:25:42 Set channel filter=0.000000e+000  result=40
12:25:42 Config A/D  Result=40
12:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:25:42 Get A/D filter: -9.255963e+061  result=40
12:25:42 Get A/D value=-858993460  result=40
12:25:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:25:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:25:42 Parameters OK
12:25:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:25:42 Set A/D data flow result=40
12:25:42 Set A/D channel type result=40
12:25:42 Set A/D encoding result=40
12:25:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:25:42 Set channel filter=0.000000e+000  result=40
12:25:42 Config A/D  Result=40
12:25:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:25:42 Get A/D filter: -9.255963e+061  result=40
12:25:42 Get A/D value=-858993460  result=40
12:25:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:25:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:25:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:25:42 Aux=
12:25:42 Message to Camera, serial 193530 queued
12:26:19 Received message from Master: op=PointingHead serial=193543
12:26:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:26:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:26:19 Point started: ret=0
12:26:19 point_skyscan result=0
12:26:20 Check angles
12:26:20 SkyScan query
12:26:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:26:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:26:21 Message to Master queued w/err=0: serial=193543 error=0
12:26:26 Received message from Master: op=Filter serial=193544
12:26:26 Color wheel filter change from 0 to 0
12:26:26 FLIGetFilterPos err=0  currentPosition=0
12:26:26 FLIGetStepsRemaining err=0  RemainingSteps=0
12:26:26 Filter is already there-color wheel unchanged
12:26:26 Received message from Master: op=Shutter serial=193545
12:26:26 Shutter LASER close
12:26:26 Received message from Camera: op=State serial=193547
12:26:26 GetSingleValue result=40  Value=cccccccc
12:26:26 SkyScan query
12:26:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:26:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:26:26 Parameters OK
12:26:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:26:26 Set A/D data flow result=40
12:26:26 Set A/D channel type result=40
12:26:26 Set A/D encoding result=40
12:26:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:26:26 Set channel filter=0.000000e+000  result=40
12:26:26 Config A/D  Result=40
12:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:26:26 Get A/D filter: -9.255963e+061  result=40
12:26:26 Get A/D value=-858993460  result=40
12:26:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:26:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:26:26 Parameters OK
12:26:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:26:26 Set A/D data flow result=40
12:26:26 Set A/D channel type result=40
12:26:26 Set A/D encoding result=40
12:26:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:26:26 Set channel filter=0.000000e+000  result=40
12:26:26 Config A/D  Result=40
12:26:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:26:26 Get A/D filter: -9.255963e+061  result=40
12:26:26 Get A/D value=-858993460  result=40
12:26:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:26:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:26:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:26:26 Aux=
12:26:26 Message to Camera, serial 193547 queued
12:27:03 Received message from Master: op=PointingHead serial=193560
12:27:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:27:03 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:27:04 Point started: ret=0
12:27:04 point_skyscan result=0
12:27:04 Check angles
12:27:04 SkyScan query
12:27:05 SkyScan query done: ret=0  az=136.095<-9073  ze=-6.51<-12434  Statuses=0009 0008
12:27:05 Msec=0  True Az=136.095  Ze=-6.51  Az status=0009  Ze status=0008
12:27:05 Check angles
12:27:05 SkyScan query
12:27:06 SkyScan query done: ret=0  az=153.525<-10235  ze=-6.495<-12433  Statuses=0009 0008
12:27:06 Msec=750  True Az=153.525  Ze=-6.495  Az status=0009  Ze status=0008
12:27:06 Check angles
12:27:06 SkyScan query
12:27:07 SkyScan query done: ret=0  az=171.09<-11406  ze=-6.495<-12433  Statuses=0009 0008
12:27:07 Msec=1500  True Az=171.09  Ze=-6.495  Az status=0009  Ze status=0008
12:27:07 Check angles
12:27:07 SkyScan query
12:27:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:27:07 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:27:07 Message to Master queued w/err=0: serial=193560 error=0
12:27:12 Received message from Master: op=Filter serial=193561
12:27:12 Color wheel filter change from 0 to 0
12:27:12 FLIGetFilterPos err=0  currentPosition=0
12:27:12 FLIGetStepsRemaining err=0  RemainingSteps=0
12:27:12 Filter is already there-color wheel unchanged
12:27:12 Received message from Master: op=Shutter serial=193562
12:27:12 Shutter LASER close
12:27:12 Received message from Camera: op=State serial=193564
12:27:12 GetSingleValue result=40  Value=cccccccc
12:27:12 SkyScan query
12:27:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:27:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:27:13 Parameters OK
12:27:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:27:13 Set A/D data flow result=40
12:27:13 Set A/D channel type result=40
12:27:13 Set A/D encoding result=40
12:27:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:27:13 Set channel filter=0.000000e+000  result=40
12:27:13 Config A/D  Result=40
12:27:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:27:13 Get A/D filter: -9.255963e+061  result=40
12:27:13 Get A/D value=-858993460  result=40
12:27:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:27:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:27:13 Parameters OK
12:27:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:27:13 Set A/D data flow result=40
12:27:13 Set A/D channel type result=40
12:27:13 Set A/D encoding result=40
12:27:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:27:13 Set channel filter=0.000000e+000  result=40
12:27:13 Config A/D  Result=40
12:27:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:27:13 Get A/D filter: -9.255963e+061  result=40
12:27:13 Get A/D value=-858993460  result=40
12:27:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:27:13 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:27:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:27:13 Aux=
12:27:13 Message to Camera, serial 193564 queued
12:27:50 Received message from Master: op=PointingHead serial=193577
12:27:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:27:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:27:50 Point started: ret=0
12:27:50 point_skyscan result=0
12:27:51 Check angles
12:27:51 SkyScan query
12:27:52 SkyScan query done: ret=0  az=153.165<-10211  ze=6.51<-11566  Statuses=0009 0008
12:27:52 Msec=0  True Az=153.165  Ze=6.51  Az status=0009  Ze status=0008
12:27:52 Check angles
12:27:52 SkyScan query
12:27:52 SkyScan query done: ret=0  az=135.72<-9048  ze=6.495<-11567  Statuses=0009 0008
12:27:52 Msec=750  True Az=135.72  Ze=6.495  Az status=0009  Ze status=0008
12:27:52 Check angles
12:27:52 SkyScan query
12:27:53 SkyScan query done: ret=0  az=118.275<-7885  ze=6.495<-11567  Statuses=0009 0008
12:27:53 Msec=1500  True Az=118.275  Ze=6.495  Az status=0009  Ze status=0008
12:27:53 Check angles
12:27:53 SkyScan query
12:27:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:27:54 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:27:54 Message to Master queued w/err=0: serial=193577 error=0
12:27:59 Received message from Master: op=Filter serial=193578
12:27:59 Color wheel filter change from 0 to 0
12:27:59 FLIGetFilterPos err=0  currentPosition=0
12:27:59 FLIGetStepsRemaining err=0  RemainingSteps=0
12:27:59 Filter is already there-color wheel unchanged
12:27:59 Received message from Master: op=Shutter serial=193579
12:27:59 Shutter LASER close
12:27:59 Received message from Camera: op=State serial=193581
12:27:59 GetSingleValue result=40  Value=cccccccc
12:27:59 SkyScan query
12:28:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:28:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:28:00 Parameters OK
12:28:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:28:00 Set A/D data flow result=40
12:28:00 Set A/D channel type result=40
12:28:00 Set A/D encoding result=40
12:28:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:28:00 Set channel filter=0.000000e+000  result=40
12:28:00 Config A/D  Result=40
12:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:28:00 Get A/D filter: -9.255963e+061  result=40
12:28:00 Get A/D value=-858993460  result=40
12:28:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:28:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:28:00 Parameters OK
12:28:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:28:00 Set A/D data flow result=40
12:28:00 Set A/D channel type result=40
12:28:00 Set A/D encoding result=40
12:28:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:28:00 Set channel filter=0.000000e+000  result=40
12:28:00 Config A/D  Result=40
12:28:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:28:00 Get A/D filter: -9.255963e+061  result=40
12:28:00 Get A/D value=-858993460  result=40
12:28:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:28:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:28:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:28:00 Aux=
12:28:00 Message to Camera, serial 193581 queued
12:28:36 Received message from Master: op=PointingHead serial=193594
12:28:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:28:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:28:37 Point started: ret=0
12:28:37 point_skyscan result=0
12:28:38 Check angles
12:28:38 SkyScan query
12:28:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.7<-13580  Statuses=0008 0009
12:28:38 Msec=0  True Az=112.995  Ze=-23.7  Az status=0008  Ze status=0009
12:28:38 Check angles
12:28:38 SkyScan query
12:28:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.655<-14977  Statuses=0008 0009
12:28:39 Msec=750  True Az=112.995  Ze=-44.655  Az status=0008  Ze status=0009
12:28:39 Check angles
12:28:39 SkyScan query
12:28:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.595<-16373  Statuses=0008 0009
12:28:40 Msec=1500  True Az=112.995  Ze=-65.595  Az status=0008  Ze status=0009
12:28:40 Check angles
12:28:40 SkyScan query
12:28:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.61<-17774  Statuses=0008 0009
12:28:40 Msec=2250  True Az=112.995  Ze=-86.61  Az status=0008  Ze status=0009
12:28:41 Check angles
12:28:41 SkyScan query
12:28:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.505<-19167  Statuses=0008 0009
12:28:41 Msec=3000  True Az=112.995  Ze=-107.505  Az status=0008  Ze status=0009
12:28:41 Check angles
12:28:41 SkyScan query
12:28:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.445<-20563  Statuses=0008 0009
12:28:42 Msec=3750  True Az=112.995  Ze=-128.445  Az status=0008  Ze status=0009
12:28:42 Check angles
12:28:42 SkyScan query
12:28:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.415<-21961  Statuses=0008 0009
12:28:43 Msec=4500  True Az=112.995  Ze=-149.415  Az status=0008  Ze status=0009
12:28:43 Check angles
12:28:43 SkyScan query
12:28:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.355<-23357  Statuses=0008 0009
12:28:43 Msec=5250  True Az=112.995  Ze=-170.355  Az status=0008  Ze status=0009
12:28:44 Check angles
12:28:44 SkyScan query
12:28:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:28:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:28:44 Message to Master queued w/err=0: serial=193594 error=0
12:28:49 Received message from Master: op=Filter serial=193595
12:28:49 Color wheel filter change from 0 to 0
12:28:49 FLIGetFilterPos err=0  currentPosition=0
12:28:49 FLIGetStepsRemaining err=0  RemainingSteps=0
12:28:49 Filter is already there-color wheel unchanged
12:28:49 Received message from Master: op=Shutter serial=193596
12:28:49 Shutter LASER open
12:28:49 Received message from Camera: op=State serial=193598
12:28:49 GetSingleValue result=40  Value=cccccccc
12:28:49 SkyScan query
12:28:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:28:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:28:50 Parameters OK
12:28:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:28:50 Set A/D data flow result=40
12:28:50 Set A/D channel type result=40
12:28:50 Set A/D encoding result=40
12:28:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:28:50 Set channel filter=0.000000e+000  result=40
12:28:50 Config A/D  Result=40
12:28:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:28:50 Get A/D filter: -9.255963e+061  result=40
12:28:50 Get A/D value=-858993460  result=40
12:28:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:28:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:28:50 Parameters OK
12:28:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:28:50 Set A/D data flow result=40
12:28:50 Set A/D channel type result=40
12:28:50 Set A/D encoding result=40
12:28:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:28:50 Set channel filter=0.000000e+000  result=40
12:28:50 Config A/D  Result=40
12:28:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:28:50 Get A/D filter: -9.255963e+061  result=40
12:28:50 Get A/D value=-858993460  result=40
12:28:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:28:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:28:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:28:50 Aux=
12:28:50 Message to Camera, serial 193598 queued
12:28:58 Received message from Master: op=Shutter serial=193607
12:28:58 Shutter LASER close
12:28:58 Received message from Master: op=PointingHead serial=193611
12:28:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:28:58 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:28:58 Point started: ret=0
12:28:58 point_skyscan result=0
12:28:59 Check angles
12:28:59 SkyScan query
12:29:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
12:29:00 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
12:29:00 Check angles
12:29:00 SkyScan query
12:29:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.1<-20140  Statuses=0008 0009
12:29:00 Msec=750  True Az=112.995  Ze=-122.1  Az status=0008  Ze status=0009
12:29:01 Check angles
12:29:01 SkyScan query
12:29:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.175<-18745  Statuses=0008 0009
12:29:01 Msec=1500  True Az=112.995  Ze=-101.175  Az status=0008  Ze status=0009
12:29:01 Check angles
12:29:01 SkyScan query
12:29:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
12:29:02 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
12:29:02 Check angles
12:29:02 SkyScan query
12:29:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.265<-15951  Statuses=0008 0009
12:29:03 Msec=3000  True Az=112.995  Ze=-59.265  Az status=0008  Ze status=0009
12:29:03 Check angles
12:29:03 SkyScan query
12:29:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.28<-14552  Statuses=0008 0009
12:29:03 Msec=3750  True Az=112.995  Ze=-38.28  Az status=0008  Ze status=0009
12:29:04 Check angles
12:29:04 SkyScan query
12:29:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.34<-13156  Statuses=0008 0009
12:29:04 Msec=4500  True Az=112.995  Ze=-17.34  Az status=0008  Ze status=0009
12:29:04 Check angles
12:29:04 SkyScan query
12:29:05 SkyScan query done: ret=0  az=112.995<-7533  ze=3.63<-11758  Statuses=0008 0009
12:29:05 Msec=5250  True Az=112.995  Ze=3.63  Az status=0008  Ze status=0009
12:29:05 Check angles
12:29:05 SkyScan query
12:29:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:29:06 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:29:06 Message to Master queued w/err=0: serial=193611 error=0
12:29:11 Received message from Master: op=Filter serial=193612
12:29:11 Color wheel filter change from 0 to 0
12:29:11 FLIGetFilterPos err=0  currentPosition=0
12:29:11 FLIGetStepsRemaining err=0  RemainingSteps=0
12:29:11 Filter is already there-color wheel unchanged
12:29:11 Received message from Master: op=Shutter serial=193613
12:29:11 Shutter LASER close
12:29:11 Received message from Camera: op=State serial=193615
12:29:11 GetSingleValue result=40  Value=cccccccc
12:29:11 SkyScan query
12:29:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:29:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:29:12 Parameters OK
12:29:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:29:12 Set A/D data flow result=40
12:29:12 Set A/D channel type result=40
12:29:12 Set A/D encoding result=40
12:29:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:29:12 Set channel filter=0.000000e+000  result=40
12:29:12 Config A/D  Result=40
12:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:29:12 Get A/D filter: -9.255963e+061  result=40
12:29:12 Get A/D value=-858993460  result=40
12:29:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:29:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:29:12 Parameters OK
12:29:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:29:12 Set A/D data flow result=40
12:29:12 Set A/D channel type result=40
12:29:12 Set A/D encoding result=40
12:29:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:29:12 Set channel filter=0.000000e+000  result=40
12:29:12 Config A/D  Result=40
12:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:29:12 Get A/D filter: -9.255963e+061  result=40
12:29:12 Get A/D value=-858993460  result=40
12:29:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:29:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:29:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:29:12 Aux=
12:29:12 Message to Camera, serial 193615 queued
12:29:48 Received message from Master: op=PointingHead serial=193628
12:29:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:29:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:29:49 Point started: ret=0
12:29:49 point_skyscan result=0
12:29:50 Check angles
12:29:50 SkyScan query
12:29:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:29:50 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:29:50 Message to Master queued w/err=0: serial=193628 error=0
12:29:55 Received message from Master: op=Filter serial=193629
12:29:55 Color wheel filter change from 0 to 0
12:29:55 FLIGetFilterPos err=0  currentPosition=0
12:29:55 FLIGetStepsRemaining err=0  RemainingSteps=0
12:29:55 Filter is already there-color wheel unchanged
12:29:55 Received message from Master: op=Shutter serial=193630
12:29:55 Shutter LASER close
12:29:55 Received message from Camera: op=State serial=193632
12:29:55 GetSingleValue result=40  Value=cccccccc
12:29:55 SkyScan query
12:29:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:29:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:29:56 Parameters OK
12:29:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:29:56 Set A/D data flow result=40
12:29:56 Set A/D channel type result=40
12:29:56 Set A/D encoding result=40
12:29:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:29:56 Set channel filter=0.000000e+000  result=40
12:29:56 Config A/D  Result=40
12:29:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:29:56 Get A/D filter: -9.255963e+061  result=40
12:29:56 Get A/D value=-858993460  result=40
12:29:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:29:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:29:56 Parameters OK
12:29:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:29:56 Set A/D data flow result=40
12:29:56 Set A/D channel type result=40
12:29:56 Set A/D encoding result=40
12:29:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:29:56 Set channel filter=0.000000e+000  result=40
12:29:56 Config A/D  Result=40
12:29:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:29:56 Get A/D filter: -9.255963e+061  result=40
12:29:56 Get A/D value=-858993460  result=40
12:29:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:29:56 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:29:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:29:56 Aux=
12:29:56 Message to Camera, serial 193632 queued
12:30:33 Received message from Master: op=PointingHead serial=193645
12:30:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:30:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:30:33 Point started: ret=0
12:30:33 point_skyscan result=0
12:30:34 Check angles
12:30:34 SkyScan query
12:30:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:30:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:30:34 Message to Master queued w/err=0: serial=193645 error=0
12:30:39 Received message from Master: op=Filter serial=193646
12:30:39 Color wheel filter change from 0 to 0
12:30:39 FLIGetFilterPos err=0  currentPosition=0
12:30:39 FLIGetStepsRemaining err=0  RemainingSteps=0
12:30:39 Filter is already there-color wheel unchanged
12:30:40 Received message from Master: op=Shutter serial=193647
12:30:40 Shutter LASER close
12:30:40 Received message from Camera: op=State serial=193649
12:30:40 GetSingleValue result=40  Value=cccccccc
12:30:40 SkyScan query
12:30:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:30:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:30:40 Parameters OK
12:30:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:30:40 Set A/D data flow result=40
12:30:40 Set A/D channel type result=40
12:30:40 Set A/D encoding result=40
12:30:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:30:40 Set channel filter=0.000000e+000  result=40
12:30:40 Config A/D  Result=40
12:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:30:40 Get A/D filter: -9.255963e+061  result=40
12:30:40 Get A/D value=-858993460  result=40
12:30:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:30:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:30:40 Parameters OK
12:30:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:30:40 Set A/D data flow result=40
12:30:40 Set A/D channel type result=40
12:30:40 Set A/D encoding result=40
12:30:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:30:40 Set channel filter=0.000000e+000  result=40
12:30:40 Config A/D  Result=40
12:30:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:30:40 Get A/D filter: -9.255963e+061  result=40
12:30:40 Get A/D value=-858993460  result=40
12:30:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:30:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:30:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:30:40 Aux=
12:30:40 Message to Camera, serial 193649 queued
12:31:17 Received message from Master: op=PointingHead serial=193662
12:31:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:31:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:31:17 Point started: ret=0
12:31:17 point_skyscan result=0
12:31:18 Check angles
12:31:18 SkyScan query
12:31:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:31:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:31:19 Message to Master queued w/err=0: serial=193662 error=0
12:31:24 Received message from Master: op=Filter serial=193663
12:31:24 Color wheel filter change from 0 to 0
12:31:24 FLIGetFilterPos err=0  currentPosition=0
12:31:24 FLIGetStepsRemaining err=0  RemainingSteps=0
12:31:24 Filter is already there-color wheel unchanged
12:31:24 Received message from Master: op=Shutter serial=193664
12:31:24 Shutter LASER close
12:31:24 Received message from Camera: op=State serial=193666
12:31:24 GetSingleValue result=40  Value=cccccccc
12:31:24 SkyScan query
12:31:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:31:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:31:24 Parameters OK
12:31:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:31:24 Set A/D data flow result=40
12:31:24 Set A/D channel type result=40
12:31:24 Set A/D encoding result=40
12:31:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:31:24 Set channel filter=0.000000e+000  result=40
12:31:24 Config A/D  Result=40
12:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:31:24 Get A/D filter: -9.255963e+061  result=40
12:31:24 Get A/D value=-858993460  result=40
12:31:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:31:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:31:24 Parameters OK
12:31:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:31:24 Set A/D data flow result=40
12:31:24 Set A/D channel type result=40
12:31:24 Set A/D encoding result=40
12:31:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:31:24 Set channel filter=0.000000e+000  result=40
12:31:24 Config A/D  Result=40
12:31:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:31:24 Get A/D filter: -9.255963e+061  result=40
12:31:24 Get A/D value=-858993460  result=40
12:31:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:31:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:31:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:31:24 Aux=
12:31:24 Message to Camera, serial 193666 queued
12:32:01 Received message from Master: op=PointingHead serial=193679
12:32:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:32:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:32:02 Point started: ret=0
12:32:02 point_skyscan result=0
12:32:02 Check angles
12:32:02 SkyScan query
12:32:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
12:32:03 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
12:32:03 Check angles
12:32:03 SkyScan query
12:32:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.565<-14971  Statuses=0008 0009
12:32:04 Msec=750  True Az=112.995  Ze=-44.565  Az status=0008  Ze status=0009
12:32:04 Check angles
12:32:04 SkyScan query
12:32:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.955<-16397  Statuses=0008 0009
12:32:04 Msec=1500  True Az=112.995  Ze=-65.955  Az status=0008  Ze status=0009
12:32:05 Check angles
12:32:05 SkyScan query
12:32:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.33<-17822  Statuses=0008 0009
12:32:05 Msec=2250  True Az=112.995  Ze=-87.33  Az status=0008  Ze status=0009
12:32:05 Check angles
12:32:05 SkyScan query
12:32:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.285<-19219  Statuses=0008 0009
12:32:06 Msec=3000  True Az=112.995  Ze=-108.285  Az status=0008  Ze status=0009
12:32:06 Check angles
12:32:06 SkyScan query
12:32:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.675<-20645  Statuses=0008 0009
12:32:07 Msec=3750  True Az=112.995  Ze=-129.675  Az status=0008  Ze status=0009
12:32:07 Check angles
12:32:07 SkyScan query
12:32:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.05<-22070  Statuses=0008 0009
12:32:08 Msec=4500  True Az=112.995  Ze=-151.05  Az status=0008  Ze status=0009
12:32:08 Check angles
12:32:08 SkyScan query
12:32:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.645<-23443  Statuses=0008 0009
12:32:08 Msec=5250  True Az=112.995  Ze=-171.645  Az status=0008  Ze status=0009
12:32:08 Check angles
12:32:08 SkyScan query
12:32:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:32:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:32:09 Message to Master queued w/err=0: serial=193679 error=0
12:32:14 Received message from Master: op=Filter serial=193680
12:32:14 Color wheel filter change from 0 to 0
12:32:14 FLIGetFilterPos err=0  currentPosition=0
12:32:14 FLIGetStepsRemaining err=0  RemainingSteps=0
12:32:14 Filter is already there-color wheel unchanged
12:32:14 Received message from Master: op=Shutter serial=193681
12:32:14 Shutter LASER open
12:32:14 Received message from Camera: op=State serial=193683
12:32:14 GetSingleValue result=40  Value=cccccccc
12:32:14 SkyScan query
12:32:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:32:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:32:15 Parameters OK
12:32:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:32:15 Set A/D data flow result=40
12:32:15 Set A/D channel type result=40
12:32:15 Set A/D encoding result=40
12:32:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:32:15 Set channel filter=0.000000e+000  result=40
12:32:15 Config A/D  Result=40
12:32:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:32:15 Get A/D filter: -9.255963e+061  result=40
12:32:15 Get A/D value=-858993460  result=40
12:32:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:32:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:32:15 Parameters OK
12:32:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:32:15 Set A/D data flow result=40
12:32:15 Set A/D channel type result=40
12:32:15 Set A/D encoding result=40
12:32:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:32:15 Set channel filter=0.000000e+000  result=40
12:32:15 Config A/D  Result=40
12:32:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:32:15 Get A/D filter: -9.255963e+061  result=40
12:32:15 Get A/D value=-858993460  result=40
12:32:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:32:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:32:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:32:15 Aux=
12:32:15 Message to Camera, serial 193683 queued
12:32:23 Received message from Master: op=Shutter serial=193693
12:32:23 Shutter LASER close
12:32:24 Received message from Master: op=PointingHead serial=193697
12:32:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:32:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:32:24 Point started: ret=0
12:32:24 point_skyscan result=0
12:32:25 Check angles
12:32:25 SkyScan query
12:32:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
12:32:26 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
12:32:26 Check angles
12:32:26 SkyScan query
12:32:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.535<-20169  Statuses=0008 0009
12:32:26 Msec=750  True Az=112.995  Ze=-122.535  Az status=0008  Ze status=0009
12:32:27 Check angles
12:32:27 SkyScan query
12:32:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
12:32:27 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
12:32:27 Check angles
12:32:27 SkyScan query
12:32:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.175<-17345  Statuses=0008 0009
12:32:28 Msec=2250  True Az=112.995  Ze=-80.175  Az status=0008  Ze status=0009
12:32:28 Check angles
12:32:28 SkyScan query
12:32:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.235<-15949  Statuses=0008 0009
12:32:29 Msec=3000  True Az=112.995  Ze=-59.235  Az status=0008  Ze status=0009
12:32:29 Check angles
12:32:29 SkyScan query
12:32:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.815<-14521  Statuses=0008 0009
12:32:29 Msec=3750  True Az=112.995  Ze=-37.815  Az status=0008  Ze status=0009
12:32:30 Check angles
12:32:30 SkyScan query
12:32:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
12:32:30 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
12:32:30 Check angles
12:32:30 SkyScan query
12:32:31 SkyScan query done: ret=0  az=112.995<-7533  ze=4.425<-11705  Statuses=0008 0009
12:32:31 Msec=5250  True Az=112.995  Ze=4.425  Az status=0008  Ze status=0009
12:32:31 Check angles
12:32:31 SkyScan query
12:32:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:32:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:32:32 Message to Master queued w/err=0: serial=193697 error=0
12:32:37 Received message from Master: op=Filter serial=193698
12:32:37 Color wheel filter change from 0 to 0
12:32:37 FLIGetFilterPos err=0  currentPosition=0
12:32:37 FLIGetStepsRemaining err=0  RemainingSteps=0
12:32:37 Filter is already there-color wheel unchanged
12:32:37 Received message from Master: op=Shutter serial=193699
12:32:37 Shutter LASER close
12:32:37 Received message from Camera: op=State serial=193701
12:32:37 GetSingleValue result=40  Value=cccccccc
12:32:37 SkyScan query
12:32:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:32:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:32:38 Parameters OK
12:32:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:32:38 Set A/D data flow result=40
12:32:38 Set A/D channel type result=40
12:32:38 Set A/D encoding result=40
12:32:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:32:38 Set channel filter=0.000000e+000  result=40
12:32:38 Config A/D  Result=40
12:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:32:38 Get A/D filter: -9.255963e+061  result=40
12:32:38 Get A/D value=-858993460  result=40
12:32:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:32:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:32:38 Parameters OK
12:32:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:32:38 Set A/D data flow result=40
12:32:38 Set A/D channel type result=40
12:32:38 Set A/D encoding result=40
12:32:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:32:38 Set channel filter=0.000000e+000  result=40
12:32:38 Config A/D  Result=40
12:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:32:38 Get A/D filter: -9.255963e+061  result=40
12:32:38 Get A/D value=-858993460  result=40
12:32:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:32:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:32:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:32:38 Aux=
12:32:38 Message to Camera, serial 193701 queued
12:33:15 Received message from Master: op=PointingHead serial=193714
12:33:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:33:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:33:15 Point started: ret=0
12:33:15 point_skyscan result=0
12:33:16 Check angles
12:33:16 SkyScan query
12:33:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:33:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:33:16 Message to Master queued w/err=0: serial=193714 error=0
12:33:21 Received message from Master: op=Filter serial=193715
12:33:21 Color wheel filter change from 0 to 0
12:33:21 FLIGetFilterPos err=0  currentPosition=0
12:33:21 FLIGetStepsRemaining err=0  RemainingSteps=0
12:33:21 Filter is already there-color wheel unchanged
12:33:21 Received message from Master: op=Shutter serial=193716
12:33:21 Shutter LASER close
12:33:21 Received message from Camera: op=State serial=193718
12:33:21 GetSingleValue result=40  Value=cccccccc
12:33:21 SkyScan query
12:33:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:33:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:33:22 Parameters OK
12:33:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:33:22 Set A/D data flow result=40
12:33:22 Set A/D channel type result=40
12:33:22 Set A/D encoding result=40
12:33:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:33:22 Set channel filter=0.000000e+000  result=40
12:33:22 Config A/D  Result=40
12:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:33:22 Get A/D filter: -9.255963e+061  result=40
12:33:22 Get A/D value=-858993460  result=40
12:33:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:33:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:33:22 Parameters OK
12:33:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:33:22 Set A/D data flow result=40
12:33:22 Set A/D channel type result=40
12:33:22 Set A/D encoding result=40
12:33:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:33:22 Set channel filter=0.000000e+000  result=40
12:33:22 Config A/D  Result=40
12:33:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:33:22 Get A/D filter: -9.255963e+061  result=40
12:33:22 Get A/D value=-858993460  result=40
12:33:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:33:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:33:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:33:22 Aux=
12:33:22 Message to Camera, serial 193718 queued
12:33:36 Received message from Master: op=Identify serial=193719
12:33:59 Received message from Master: op=PointingHead serial=193734
12:33:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:33:59 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:33:59 Point started: ret=0
12:33:59 point_skyscan result=0
12:34:00 Check angles
12:34:00 SkyScan query
12:34:01 SkyScan query done: ret=0  az=136.35<-9090  ze=-6.51<-12434  Statuses=0009 0008
12:34:01 Msec=0  True Az=136.35  Ze=-6.51  Az status=0009  Ze status=0008
12:34:01 Check angles
12:34:01 SkyScan query
12:34:01 SkyScan query done: ret=0  az=154.155<-10277  ze=-6.495<-12433  Statuses=0009 0008
12:34:01 Msec=750  True Az=154.155  Ze=-6.495  Az status=0009  Ze status=0008
12:34:01 Check angles
12:34:01 SkyScan query
12:34:02 SkyScan query done: ret=0  az=171.615<-11441  ze=-6.495<-12433  Statuses=0009 0008
12:34:02 Msec=1500  True Az=171.615  Ze=-6.495  Az status=0009  Ze status=0008
12:34:02 Check angles
12:34:02 SkyScan query
12:34:03 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:34:03 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:34:03 Message to Master queued w/err=0: serial=193734 error=0
12:34:08 Received message from Master: op=Filter serial=193735
12:34:08 Color wheel filter change from 0 to 0
12:34:08 FLIGetFilterPos err=0  currentPosition=0
12:34:08 FLIGetStepsRemaining err=0  RemainingSteps=0
12:34:08 Filter is already there-color wheel unchanged
12:34:08 Received message from Master: op=Shutter serial=193736
12:34:08 Shutter LASER close
12:34:08 Received message from Camera: op=State serial=193738
12:34:08 GetSingleValue result=40  Value=cccccccc
12:34:08 SkyScan query
12:34:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:34:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:34:09 Parameters OK
12:34:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:34:09 Set A/D data flow result=40
12:34:09 Set A/D channel type result=40
12:34:09 Set A/D encoding result=40
12:34:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:34:09 Set channel filter=0.000000e+000  result=40
12:34:09 Config A/D  Result=40
12:34:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:34:09 Get A/D filter: -9.255963e+061  result=40
12:34:09 Get A/D value=-858993460  result=40
12:34:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:34:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:34:09 Parameters OK
12:34:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:34:09 Set A/D data flow result=40
12:34:09 Set A/D channel type result=40
12:34:09 Set A/D encoding result=40
12:34:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:34:09 Set channel filter=0.000000e+000  result=40
12:34:09 Config A/D  Result=40
12:34:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:34:09 Get A/D filter: -9.255963e+061  result=40
12:34:09 Get A/D value=-858993460  result=40
12:34:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:34:09 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:34:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:34:09 Aux=
[UTC 2019-3-9  12:34:09]
12:34:09 Message to Camera, serial 193738 queued
12:34:45 Received message from Master: op=PointingHead serial=193751
12:34:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:34:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:34:46 Point started: ret=0
12:34:46 point_skyscan result=0
12:34:46 Check angles
12:34:46 SkyScan query
12:34:47 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
12:34:47 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
12:34:47 Check angles
12:34:47 SkyScan query
12:34:48 SkyScan query done: ret=0  az=135.165<-9011  ze=6.495<-11567  Statuses=0009 0008
12:34:48 Msec=750  True Az=135.165  Ze=6.495  Az status=0009  Ze status=0008
12:34:48 Check angles
12:34:48 SkyScan query
12:34:49 SkyScan query done: ret=0  az=117.735<-7849  ze=6.495<-11567  Statuses=0009 0008
12:34:49 Msec=1500  True Az=117.735  Ze=6.495  Az status=0009  Ze status=0008
12:34:49 Check angles
12:34:49 SkyScan query
12:34:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:34:49 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:34:49 Message to Master queued w/err=0: serial=193751 error=0
12:34:54 Received message from Master: op=Filter serial=193752
12:34:54 Color wheel filter change from 0 to 0
12:34:54 FLIGetFilterPos err=0  currentPosition=0
12:34:54 FLIGetStepsRemaining err=0  RemainingSteps=0
12:34:54 Filter is already there-color wheel unchanged
12:34:55 Received message from Master: op=Shutter serial=193753
12:34:55 Shutter LASER close
12:34:55 Received message from Camera: op=State serial=193755
12:34:55 GetSingleValue result=40  Value=cccccccc
12:34:55 SkyScan query
12:34:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:34:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:34:55 Parameters OK
12:34:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:34:55 Set A/D data flow result=40
12:34:55 Set A/D channel type result=40
12:34:55 Set A/D encoding result=40
12:34:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:34:55 Set channel filter=0.000000e+000  result=40
12:34:55 Config A/D  Result=40
12:34:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:34:55 Get A/D filter: -9.255963e+061  result=40
12:34:55 Get A/D value=-858993460  result=40
12:34:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:34:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:34:55 Parameters OK
12:34:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:34:55 Set A/D data flow result=40
12:34:55 Set A/D channel type result=40
12:34:55 Set A/D encoding result=40
12:34:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:34:55 Set channel filter=0.000000e+000  result=40
12:34:55 Config A/D  Result=40
12:34:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:34:55 Get A/D filter: -9.255963e+061  result=40
12:34:55 Get A/D value=-858993460  result=40
12:34:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:34:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:34:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:34:55 Aux=
12:34:55 Message to Camera, serial 193755 queued
12:35:32 Received message from Master: op=PointingHead serial=193768
12:35:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:35:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:35:32 Point started: ret=0
12:35:32 point_skyscan result=0
12:35:33 Check angles
12:35:33 SkyScan query
12:35:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
12:35:34 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
12:35:34 Check angles
12:35:34 SkyScan query
12:35:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
12:35:34 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
12:35:35 Check angles
12:35:35 SkyScan query
12:35:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.355<-16357  Statuses=0008 0009
12:35:35 Msec=1500  True Az=112.995  Ze=-65.355  Az status=0008  Ze status=0009
12:35:35 Check angles
12:35:35 SkyScan query
12:35:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.745<-17783  Statuses=0008 0009
12:35:36 Msec=2250  True Az=112.995  Ze=-86.745  Az status=0008  Ze status=0009
12:35:36 Check angles
12:35:36 SkyScan query
12:35:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.7<-19180  Statuses=0008 0009
12:35:37 Msec=3000  True Az=112.995  Ze=-107.7  Az status=0008  Ze status=0009
12:35:37 Check angles
12:35:37 SkyScan query
12:35:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.625<-20575  Statuses=0008 0009
12:35:37 Msec=3750  True Az=112.995  Ze=-128.625  Az status=0008  Ze status=0009
12:35:38 Check angles
12:35:38 SkyScan query
12:35:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.015<-22001  Statuses=0008 0009
12:35:38 Msec=4500  True Az=112.995  Ze=-150.015  Az status=0008  Ze status=0009
12:35:38 Check angles
12:35:38 SkyScan query
12:35:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.895<-23393  Statuses=0008 0009
12:35:39 Msec=5250  True Az=112.995  Ze=-170.895  Az status=0008  Ze status=0009
12:35:39 Check angles
12:35:39 SkyScan query
12:35:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:35:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:35:40 Message to Master queued w/err=0: serial=193768 error=0
12:35:45 Received message from Master: op=Filter serial=193769
12:35:45 Color wheel filter change from 0 to 0
12:35:45 FLIGetFilterPos err=0  currentPosition=0
12:35:45 FLIGetStepsRemaining err=0  RemainingSteps=0
12:35:45 Filter is already there-color wheel unchanged
12:35:45 Received message from Master: op=Shutter serial=193770
12:35:45 Shutter LASER open
12:35:45 Received message from Camera: op=State serial=193772
12:35:45 GetSingleValue result=40  Value=cccccccc
12:35:45 SkyScan query
12:35:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:35:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:35:46 Parameters OK
12:35:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:35:46 Set A/D data flow result=40
12:35:46 Set A/D channel type result=40
12:35:46 Set A/D encoding result=40
12:35:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:35:46 Set channel filter=0.000000e+000  result=40
12:35:46 Config A/D  Result=40
12:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:35:46 Get A/D filter: -9.255963e+061  result=40
12:35:46 Get A/D value=-858993460  result=40
12:35:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:35:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:35:46 Parameters OK
12:35:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:35:46 Set A/D data flow result=40
12:35:46 Set A/D channel type result=40
12:35:46 Set A/D encoding result=40
12:35:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:35:46 Set channel filter=0.000000e+000  result=40
12:35:46 Config A/D  Result=40
12:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:35:46 Get A/D filter: -9.255963e+061  result=40
12:35:46 Get A/D value=-858993460  result=40
12:35:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:35:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:35:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:35:46 Aux=
12:35:46 Message to Camera, serial 193772 queued
12:35:54 Received message from Master: op=Shutter serial=193782
12:35:54 Shutter LASER close
12:35:54 Received message from Master: op=PointingHead serial=193786
12:35:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:35:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:35:55 Point started: ret=0
12:35:55 point_skyscan result=0
12:35:56 Check angles
12:35:56 SkyScan query
12:35:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
12:35:56 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
12:35:56 Check angles
12:35:56 SkyScan query
12:35:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
12:35:57 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
12:35:57 Check angles
12:35:57 SkyScan query
12:35:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.785<-18719  Statuses=0008 0009
12:35:58 Msec=1500  True Az=112.995  Ze=-100.785  Az status=0008  Ze status=0009
12:35:58 Check angles
12:35:58 SkyScan query
12:35:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.83<-17322  Statuses=0008 0009
12:35:58 Msec=2250  True Az=112.995  Ze=-79.83  Az status=0008  Ze status=0009
12:35:59 Check angles
12:35:59 SkyScan query
12:35:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.89<-15926  Statuses=0008 0009
12:35:59 Msec=3000  True Az=112.995  Ze=-58.89  Az status=0008  Ze status=0009
12:35:59 Check angles
12:35:59 SkyScan query
12:36:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.905<-14527  Statuses=0008 0009
12:36:00 Msec=3750  True Az=112.995  Ze=-37.905  Az status=0008  Ze status=0009
12:36:00 Check angles
12:36:00 SkyScan query
12:36:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.95<-13130  Statuses=0008 0009
12:36:01 Msec=4500  True Az=112.995  Ze=-16.95  Az status=0008  Ze status=0009
12:36:01 Check angles
12:36:01 SkyScan query
12:36:01 SkyScan query done: ret=0  az=112.995<-7533  ze=4.005<-11733  Statuses=0008 0009
12:36:01 Msec=5250  True Az=112.995  Ze=4.005  Az status=0008  Ze status=0009
12:36:02 Check angles
12:36:02 SkyScan query
12:36:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:36:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:36:02 Message to Master queued w/err=0: serial=193786 error=0
12:36:07 Received message from Master: op=Filter serial=193787
12:36:07 Color wheel filter change from 0 to 0
12:36:07 FLIGetFilterPos err=0  currentPosition=0
12:36:07 FLIGetStepsRemaining err=0  RemainingSteps=0
12:36:07 Filter is already there-color wheel unchanged
12:36:07 Received message from Master: op=Shutter serial=193788
12:36:07 Shutter LASER close
12:36:07 Received message from Camera: op=State serial=193790
12:36:07 GetSingleValue result=40  Value=cccccccc
12:36:07 SkyScan query
12:36:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:36:08 Parameters OK
12:36:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:36:08 Set A/D data flow result=40
12:36:08 Set A/D channel type result=40
12:36:08 Set A/D encoding result=40
12:36:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:36:08 Set channel filter=0.000000e+000  result=40
12:36:08 Config A/D  Result=40
12:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:36:08 Get A/D filter: -9.255963e+061  result=40
12:36:08 Get A/D value=-858993460  result=40
12:36:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:36:08 Parameters OK
12:36:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:36:08 Set A/D data flow result=40
12:36:08 Set A/D channel type result=40
12:36:08 Set A/D encoding result=40
12:36:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:36:08 Set channel filter=0.000000e+000  result=40
12:36:08 Config A/D  Result=40
12:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:36:08 Get A/D filter: -9.255963e+061  result=40
12:36:08 Get A/D value=-858993460  result=40
12:36:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:36:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:36:08 Aux=
12:36:08 Message to Camera, serial 193790 queued
12:36:45 Received message from Master: op=PointingHead serial=193803
12:36:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:36:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:36:45 Point started: ret=0
12:36:45 point_skyscan result=0
12:36:46 Check angles
12:36:46 SkyScan query
12:36:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:36:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:36:47 Message to Master queued w/err=0: serial=193803 error=0
12:36:52 Received message from Master: op=Filter serial=193804
12:36:52 Color wheel filter change from 0 to 0
12:36:52 FLIGetFilterPos err=0  currentPosition=0
12:36:52 FLIGetStepsRemaining err=0  RemainingSteps=0
12:36:52 Filter is already there-color wheel unchanged
12:36:52 Received message from Master: op=Shutter serial=193805
12:36:52 Shutter LASER close
12:36:52 Received message from Camera: op=State serial=193807
12:36:52 GetSingleValue result=40  Value=cccccccc
12:36:52 SkyScan query
12:36:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:36:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:36:52 Parameters OK
12:36:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:36:52 Set A/D data flow result=40
12:36:52 Set A/D channel type result=40
12:36:52 Set A/D encoding result=40
12:36:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:36:52 Set channel filter=0.000000e+000  result=40
12:36:52 Config A/D  Result=40
12:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:36:52 Get A/D filter: -9.255963e+061  result=40
12:36:52 Get A/D value=-858993460  result=40
12:36:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:36:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:36:52 Parameters OK
12:36:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:36:52 Set A/D data flow result=40
12:36:52 Set A/D channel type result=40
12:36:52 Set A/D encoding result=40
12:36:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:36:52 Set channel filter=0.000000e+000  result=40
12:36:52 Config A/D  Result=40
12:36:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:36:52 Get A/D filter: -9.255963e+061  result=40
12:36:52 Get A/D value=-858993460  result=40
12:36:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:36:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:36:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:36:52 Aux=
12:36:52 Message to Camera, serial 193807 queued
12:37:29 Received message from Master: op=PointingHead serial=193820
12:37:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:37:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:37:30 Point started: ret=0
12:37:30 point_skyscan result=0
12:37:30 Check angles
12:37:30 SkyScan query
12:37:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:37:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:37:31 Message to Master queued w/err=0: serial=193820 error=0
12:37:36 Received message from Master: op=Filter serial=193821
12:37:36 Color wheel filter change from 0 to 0
12:37:36 FLIGetFilterPos err=0  currentPosition=0
12:37:36 FLIGetStepsRemaining err=0  RemainingSteps=0
12:37:36 Filter is already there-color wheel unchanged
12:37:36 Received message from Master: op=Shutter serial=193822
12:37:36 Shutter LASER close
12:37:36 Received message from Camera: op=State serial=193824
12:37:36 GetSingleValue result=40  Value=cccccccc
12:37:36 SkyScan query
12:37:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:37:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:37:37 Parameters OK
12:37:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:37:37 Set A/D data flow result=40
12:37:37 Set A/D channel type result=40
12:37:37 Set A/D encoding result=40
12:37:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:37:37 Set channel filter=0.000000e+000  result=40
12:37:37 Config A/D  Result=40
12:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:37:37 Get A/D filter: -9.255963e+061  result=40
12:37:37 Get A/D value=-858993460  result=40
12:37:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:37:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:37:37 Parameters OK
12:37:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:37:37 Set A/D data flow result=40
12:37:37 Set A/D channel type result=40
12:37:37 Set A/D encoding result=40
12:37:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:37:37 Set channel filter=0.000000e+000  result=40
12:37:37 Config A/D  Result=40
12:37:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:37:37 Get A/D filter: -9.255963e+061  result=40
12:37:37 Get A/D value=-858993460  result=40
12:37:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:37:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:37:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:37:37 Aux=
12:37:37 Message to Camera, serial 193824 queued
12:38:14 Received message from Master: op=PointingHead serial=193837
12:38:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:38:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:38:14 Point started: ret=0
12:38:14 point_skyscan result=0
12:38:15 Check angles
12:38:15 SkyScan query
12:38:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:38:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:38:15 Message to Master queued w/err=0: serial=193837 error=0
12:38:20 Received message from Master: op=Filter serial=193838
12:38:20 Color wheel filter change from 0 to 0
12:38:20 FLIGetFilterPos err=0  currentPosition=0
12:38:20 FLIGetStepsRemaining err=0  RemainingSteps=0
12:38:20 Filter is already there-color wheel unchanged
12:38:21 Received message from Master: op=Shutter serial=193839
12:38:21 Shutter LASER close
12:38:21 Received message from Camera: op=State serial=193841
12:38:21 GetSingleValue result=40  Value=cccccccc
12:38:21 SkyScan query
12:38:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:38:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:38:21 Parameters OK
12:38:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:38:21 Set A/D data flow result=40
12:38:21 Set A/D channel type result=40
12:38:21 Set A/D encoding result=40
12:38:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:38:21 Set channel filter=0.000000e+000  result=40
12:38:21 Config A/D  Result=40
12:38:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:38:21 Get A/D filter: -9.255963e+061  result=40
12:38:21 Get A/D value=-858993460  result=40
12:38:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:38:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:38:21 Parameters OK
12:38:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:38:21 Set A/D data flow result=40
12:38:21 Set A/D channel type result=40
12:38:21 Set A/D encoding result=40
12:38:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:38:21 Set channel filter=0.000000e+000  result=40
12:38:21 Config A/D  Result=40
12:38:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:38:21 Get A/D filter: -9.255963e+061  result=40
12:38:21 Get A/D value=-858993460  result=40
12:38:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:38:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:38:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:38:21 Aux=
12:38:21 Message to Camera, serial 193841 queued
12:38:58 Received message from Master: op=PointingHead serial=193854
12:38:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:38:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:38:58 Point started: ret=0
12:38:58 point_skyscan result=0
12:38:59 Check angles
12:38:59 SkyScan query
12:39:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
12:39:00 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
12:39:00 Check angles
12:39:00 SkyScan query
12:39:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.1<-14940  Statuses=0008 0009
12:39:00 Msec=750  True Az=112.995  Ze=-44.1  Az status=0008  Ze status=0009
12:39:01 Check angles
12:39:01 SkyScan query
12:39:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.07<-16338  Statuses=0008 0009
12:39:01 Msec=1500  True Az=112.995  Ze=-65.07  Az status=0008  Ze status=0009
12:39:01 Check angles
12:39:01 SkyScan query
12:39:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.025<-17735  Statuses=0008 0009
12:39:02 Msec=2250  True Az=112.995  Ze=-86.025  Az status=0008  Ze status=0009
12:39:02 Check angles
12:39:02 SkyScan query
12:39:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.965<-19131  Statuses=0008 0009
12:39:03 Msec=3000  True Az=112.995  Ze=-106.965  Az status=0008  Ze status=0009
12:39:03 Check angles
12:39:03 SkyScan query
12:39:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.355<-20557  Statuses=0008 0009
12:39:03 Msec=3750  True Az=112.995  Ze=-128.355  Az status=0008  Ze status=0009
12:39:04 Check angles
12:39:04 SkyScan query
12:39:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.325<-21955  Statuses=0008 0009
12:39:04 Msec=4500  True Az=112.995  Ze=-149.325  Az status=0008  Ze status=0009
12:39:04 Check angles
12:39:04 SkyScan query
12:39:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.265<-23351  Statuses=0008 0009
12:39:05 Msec=5250  True Az=112.995  Ze=-170.265  Az status=0008  Ze status=0009
12:39:05 Check angles
12:39:05 SkyScan query
12:39:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:39:06 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:39:06 Message to Master queued w/err=0: serial=193854 error=0
12:39:11 Received message from Master: op=Filter serial=193855
12:39:11 Color wheel filter change from 0 to 0
12:39:11 FLIGetFilterPos err=0  currentPosition=0
12:39:11 FLIGetStepsRemaining err=0  RemainingSteps=0
12:39:11 Filter is already there-color wheel unchanged
12:39:11 Received message from Master: op=Shutter serial=193856
12:39:11 Shutter LASER open
12:39:11 Received message from Camera: op=State serial=193858
12:39:11 GetSingleValue result=40  Value=cccccccc
12:39:11 SkyScan query
12:39:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:39:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:39:12 Parameters OK
12:39:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:39:12 Set A/D data flow result=40
12:39:12 Set A/D channel type result=40
12:39:12 Set A/D encoding result=40
12:39:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:39:12 Set channel filter=0.000000e+000  result=40
12:39:12 Config A/D  Result=40
12:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:39:12 Get A/D filter: -9.255963e+061  result=40
12:39:12 Get A/D value=-858993460  result=40
12:39:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:39:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:39:12 Parameters OK
12:39:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:39:12 Set A/D data flow result=40
12:39:12 Set A/D channel type result=40
12:39:12 Set A/D encoding result=40
12:39:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:39:12 Set channel filter=0.000000e+000  result=40
12:39:12 Config A/D  Result=40
12:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:39:12 Get A/D filter: -9.255963e+061  result=40
12:39:12 Get A/D value=-858993460  result=40
12:39:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:39:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:39:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:39:12 Aux=
12:39:12 Message to Camera, serial 193858 queued
12:39:20 Received message from Master: op=Shutter serial=193868
12:39:20 Shutter LASER close
12:39:21 Received message from Master: op=PointingHead serial=193872
12:39:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:39:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:39:21 Point started: ret=0
12:39:21 point_skyscan result=0
12:39:22 Check angles
12:39:22 SkyScan query
12:39:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.43<-21562  Statuses=0008 0009
12:39:22 Msec=0  True Az=112.995  Ze=-143.43  Az status=0008  Ze status=0009
12:39:22 Check angles
12:39:22 SkyScan query
12:39:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.475<-20165  Statuses=0008 0009
12:39:23 Msec=750  True Az=112.995  Ze=-122.475  Az status=0008  Ze status=0009
12:39:23 Check angles
12:39:23 SkyScan query
12:39:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.52<-18768  Statuses=0008 0009
12:39:24 Msec=1500  True Az=112.995  Ze=-101.52  Az status=0008  Ze status=0009
12:39:24 Check angles
12:39:24 SkyScan query
12:39:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.535<-17369  Statuses=0008 0009
12:39:25 Msec=2250  True Az=112.995  Ze=-80.535  Az status=0008  Ze status=0009
12:39:25 Check angles
12:39:25 SkyScan query
12:39:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.61<-15974  Statuses=0008 0009
12:39:25 Msec=3000  True Az=112.995  Ze=-59.61  Az status=0008  Ze status=0009
12:39:25 Check angles
12:39:25 SkyScan query
12:39:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.64<-14576  Statuses=0008 0009
12:39:26 Msec=3750  True Az=112.995  Ze=-38.64  Az status=0008  Ze status=0009
12:39:26 Check angles
12:39:26 SkyScan query
12:39:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.7<-13180  Statuses=0008 0009
12:39:27 Msec=4500  True Az=112.995  Ze=-17.7  Az status=0008  Ze status=0009
12:39:27 Check angles
12:39:27 SkyScan query
12:39:28 SkyScan query done: ret=0  az=112.995<-7533  ze=3.27<-11782  Statuses=0008 0009
12:39:28 Msec=5250  True Az=112.995  Ze=3.27  Az status=0008  Ze status=0009
12:39:28 Check angles
12:39:28 SkyScan query
12:39:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:39:28 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:39:28 Message to Master queued w/err=0: serial=193872 error=0
12:39:33 Received message from Master: op=Filter serial=193873
12:39:33 Color wheel filter change from 0 to 0
12:39:33 FLIGetFilterPos err=0  currentPosition=0
12:39:33 FLIGetStepsRemaining err=0  RemainingSteps=0
12:39:33 Filter is already there-color wheel unchanged
12:39:33 Received message from Master: op=Shutter serial=193874
12:39:33 Shutter LASER close
12:39:34 Received message from Camera: op=State serial=193876
12:39:34 GetSingleValue result=40  Value=cccccccc
12:39:34 SkyScan query
12:39:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:39:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:39:34 Parameters OK
12:39:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:39:34 Set A/D data flow result=40
12:39:34 Set A/D channel type result=40
12:39:34 Set A/D encoding result=40
12:39:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:39:34 Set channel filter=0.000000e+000  result=40
12:39:34 Config A/D  Result=40
12:39:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:39:34 Get A/D filter: -9.255963e+061  result=40
12:39:34 Get A/D value=-858993460  result=40
12:39:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:39:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:39:34 Parameters OK
12:39:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:39:34 Set A/D data flow result=40
12:39:34 Set A/D channel type result=40
12:39:34 Set A/D encoding result=40
12:39:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:39:34 Set channel filter=0.000000e+000  result=40
12:39:34 Config A/D  Result=40
12:39:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:39:34 Get A/D filter: -9.255963e+061  result=40
12:39:34 Get A/D value=-858993460  result=40
12:39:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:39:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:39:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:39:34 Aux=
12:39:34 Message to Camera, serial 193876 queued
12:40:11 Received message from Master: op=PointingHead serial=193889
12:40:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:40:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:40:11 Point started: ret=0
12:40:11 point_skyscan result=0
12:40:12 Check angles
12:40:12 SkyScan query
12:40:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:40:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:40:13 Message to Master queued w/err=0: serial=193889 error=0
12:40:18 Received message from Master: op=Filter serial=193890
12:40:18 Color wheel filter change from 0 to 0
12:40:18 FLIGetFilterPos err=0  currentPosition=0
12:40:18 FLIGetStepsRemaining err=0  RemainingSteps=0
12:40:18 Filter is already there-color wheel unchanged
12:40:18 Received message from Master: op=Shutter serial=193891
12:40:18 Shutter LASER close
12:40:18 Received message from Camera: op=State serial=193893
12:40:18 GetSingleValue result=40  Value=cccccccc
12:40:18 SkyScan query
12:40:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:40:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:40:18 Parameters OK
12:40:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:40:18 Set A/D data flow result=40
12:40:18 Set A/D channel type result=40
12:40:18 Set A/D encoding result=40
12:40:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:40:18 Set channel filter=0.000000e+000  result=40
12:40:18 Config A/D  Result=40
12:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:40:18 Get A/D filter: -9.255963e+061  result=40
12:40:18 Get A/D value=-858993460  result=40
12:40:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:40:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:40:18 Parameters OK
12:40:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:40:18 Set A/D data flow result=40
12:40:18 Set A/D channel type result=40
12:40:18 Set A/D encoding result=40
12:40:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:40:18 Set channel filter=0.000000e+000  result=40
12:40:18 Config A/D  Result=40
12:40:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:40:18 Get A/D filter: -9.255963e+061  result=40
12:40:18 Get A/D value=-858993460  result=40
12:40:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:40:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:40:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:40:18 Aux=
12:40:18 Message to Camera, serial 193893 queued
12:40:55 Received message from Master: op=PointingHead serial=193906
12:40:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:40:55 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:40:56 Point started: ret=0
12:40:56 point_skyscan result=0
12:40:56 Check angles
12:40:56 SkyScan query
12:40:57 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
12:40:57 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
12:40:57 Check angles
12:40:57 SkyScan query
12:40:58 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
12:40:58 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
12:40:58 Check angles
12:40:58 SkyScan query
12:40:59 SkyScan query done: ret=0  az=170.97<-11398  ze=-6.495<-12433  Statuses=0009 0008
12:40:59 Msec=1500  True Az=170.97  Ze=-6.495  Az status=0009  Ze status=0008
12:40:59 Check angles
12:40:59 SkyScan query
12:40:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:40:59 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:40:59 Message to Master queued w/err=0: serial=193906 error=0
12:41:04 Received message from Master: op=Filter serial=193907
12:41:04 Color wheel filter change from 0 to 0
12:41:04 FLIGetFilterPos err=0  currentPosition=0
12:41:04 FLIGetStepsRemaining err=0  RemainingSteps=0
12:41:04 Filter is already there-color wheel unchanged
12:41:04 Received message from Master: op=Shutter serial=193908
12:41:04 Shutter LASER close
12:41:04 Received message from Camera: op=State serial=193910
12:41:04 GetSingleValue result=40  Value=cccccccc
12:41:04 SkyScan query
12:41:05 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:41:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:41:05 Parameters OK
12:41:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:41:05 Set A/D data flow result=40
12:41:05 Set A/D channel type result=40
12:41:05 Set A/D encoding result=40
12:41:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:41:05 Set channel filter=0.000000e+000  result=40
12:41:05 Config A/D  Result=40
12:41:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:41:05 Get A/D filter: -9.255963e+061  result=40
12:41:05 Get A/D value=-858993460  result=40
12:41:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:41:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:41:05 Parameters OK
12:41:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:41:05 Set A/D data flow result=40
12:41:05 Set A/D channel type result=40
12:41:05 Set A/D encoding result=40
12:41:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:41:05 Set channel filter=0.000000e+000  result=40
12:41:05 Config A/D  Result=40
12:41:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:41:05 Get A/D filter: -9.255963e+061  result=40
12:41:05 Get A/D value=-858993460  result=40
12:41:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:41:05 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:41:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:41:05 Aux=
12:41:05 Message to Camera, serial 193910 queued
12:41:42 Received message from Master: op=PointingHead serial=193923
12:41:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:41:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:41:42 Point started: ret=0
12:41:42 point_skyscan result=0
12:41:43 Check angles
12:41:43 SkyScan query
12:41:44 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
12:41:44 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
12:41:44 Check angles
12:41:44 SkyScan query
12:41:44 SkyScan query done: ret=0  az=135.525<-9035  ze=6.495<-11567  Statuses=0009 0008
12:41:44 Msec=750  True Az=135.525  Ze=6.495  Az status=0009  Ze status=0008
12:41:45 Check angles
12:41:45 SkyScan query
12:41:45 SkyScan query done: ret=0  az=117.705<-7847  ze=6.495<-11567  Statuses=0009 0008
12:41:45 Msec=1500  True Az=117.705  Ze=6.495  Az status=0009  Ze status=0008
12:41:45 Check angles
12:41:45 SkyScan query
12:41:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:41:46 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:41:46 Message to Master queued w/err=0: serial=193923 error=0
12:41:51 Received message from Master: op=Filter serial=193924
12:41:51 Color wheel filter change from 0 to 0
12:41:51 FLIGetFilterPos err=0  currentPosition=0
12:41:51 FLIGetStepsRemaining err=0  RemainingSteps=0
12:41:51 Filter is already there-color wheel unchanged
12:41:51 Received message from Master: op=Shutter serial=193925
12:41:51 Shutter LASER close
12:41:51 Received message from Camera: op=State serial=193927
12:41:51 GetSingleValue result=40  Value=cccccccc
12:41:51 SkyScan query
12:41:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:41:52 Parameters OK
12:41:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:41:52 Set A/D data flow result=40
12:41:52 Set A/D channel type result=40
12:41:52 Set A/D encoding result=40
12:41:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:41:52 Set channel filter=0.000000e+000  result=40
12:41:52 Config A/D  Result=40
12:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:41:52 Get A/D filter: -9.255963e+061  result=40
12:41:52 Get A/D value=-858993460  result=40
12:41:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:41:52 Parameters OK
12:41:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:41:52 Set A/D data flow result=40
12:41:52 Set A/D channel type result=40
12:41:52 Set A/D encoding result=40
12:41:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:41:52 Set channel filter=0.000000e+000  result=40
12:41:52 Config A/D  Result=40
12:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:41:52 Get A/D filter: -9.255963e+061  result=40
12:41:52 Get A/D value=-858993460  result=40
12:41:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:41:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:41:52 Aux=
12:41:52 Message to Camera, serial 193927 queued
12:42:28 Received message from Master: op=PointingHead serial=193940
12:42:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:42:28 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:42:29 Point started: ret=0
12:42:29 point_skyscan result=0
12:42:30 Check angles
12:42:30 SkyScan query
12:42:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.685<-13579  Statuses=0008 0009
12:42:30 Msec=0  True Az=112.995  Ze=-23.685  Az status=0008  Ze status=0009
12:42:30 Check angles
12:42:30 SkyScan query
12:42:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.075<-15005  Statuses=0008 0009
12:42:31 Msec=750  True Az=112.995  Ze=-45.075  Az status=0008  Ze status=0009
12:42:31 Check angles
12:42:31 SkyScan query
12:42:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.03<-16402  Statuses=0008 0009
12:42:32 Msec=1500  True Az=112.995  Ze=-66.03  Az status=0008  Ze status=0009
12:42:32 Check angles
12:42:32 SkyScan query
12:42:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.97<-17798  Statuses=0008 0009
12:42:32 Msec=2250  True Az=112.995  Ze=-86.97  Az status=0008  Ze status=0009
12:42:33 Check angles
12:42:33 SkyScan query
12:42:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.36<-19224  Statuses=0008 0009
12:42:33 Msec=3000  True Az=112.995  Ze=-108.36  Az status=0008  Ze status=0009
12:42:33 Check angles
12:42:33 SkyScan query
12:42:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.315<-20621  Statuses=0008 0009
12:42:34 Msec=3750  True Az=112.995  Ze=-129.315  Az status=0008  Ze status=0009
12:42:34 Check angles
12:42:34 SkyScan query
12:42:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.27<-22018  Statuses=0008 0009
12:42:35 Msec=4500  True Az=112.995  Ze=-150.27  Az status=0008  Ze status=0009
12:42:35 Check angles
12:42:35 SkyScan query
12:42:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.06<-23404  Statuses=0008 0009
12:42:35 Msec=5250  True Az=112.995  Ze=-171.06  Az status=0008  Ze status=0009
12:42:36 Check angles
12:42:36 SkyScan query
12:42:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:42:36 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:42:36 Message to Master queued w/err=0: serial=193940 error=0
12:42:41 Received message from Master: op=Filter serial=193941
12:42:41 Color wheel filter change from 0 to 0
12:42:41 FLIGetFilterPos err=0  currentPosition=0
12:42:41 FLIGetStepsRemaining err=0  RemainingSteps=0
12:42:41 Filter is already there-color wheel unchanged
12:42:41 Received message from Master: op=Shutter serial=193942
12:42:41 Shutter LASER open
12:42:42 Received message from Camera: op=State serial=193944
12:42:42 GetSingleValue result=40  Value=cccccccc
12:42:42 SkyScan query
12:42:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:42:42 Parameters OK
12:42:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:42:42 Set A/D data flow result=40
12:42:42 Set A/D channel type result=40
12:42:42 Set A/D encoding result=40
12:42:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:42:42 Set channel filter=0.000000e+000  result=40
12:42:42 Config A/D  Result=40
12:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:42:42 Get A/D filter: -9.255963e+061  result=40
12:42:42 Get A/D value=-858993460  result=40
12:42:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:42:42 Parameters OK
12:42:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:42:42 Set A/D data flow result=40
12:42:42 Set A/D channel type result=40
12:42:42 Set A/D encoding result=40
12:42:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:42:42 Set channel filter=0.000000e+000  result=40
12:42:42 Config A/D  Result=40
12:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:42:42 Get A/D filter: -9.255963e+061  result=40
12:42:42 Get A/D value=-858993460  result=40
12:42:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:42:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:42:42 Aux=
12:42:42 Message to Camera, serial 193944 queued
12:42:50 Received message from Master: op=Shutter serial=193953
12:42:50 Shutter LASER close
12:42:50 Received message from Master: op=PointingHead serial=193957
12:42:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:42:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:42:50 Point started: ret=0
12:42:50 point_skyscan result=0
12:42:51 Check angles
12:42:51 SkyScan query
12:42:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.25<-21550  Statuses=0008 0009
12:42:52 Msec=0  True Az=112.995  Ze=-143.25  Az status=0008  Ze status=0009
12:42:52 Check angles
12:42:52 SkyScan query
12:42:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
12:42:52 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
12:42:53 Check angles
12:42:53 SkyScan query
12:42:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.92<-18728  Statuses=0008 0009
12:42:53 Msec=1500  True Az=112.995  Ze=-100.92  Az status=0008  Ze status=0009
12:42:53 Check angles
12:42:53 SkyScan query
12:42:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.965<-17331  Statuses=0008 0009
12:42:54 Msec=2250  True Az=112.995  Ze=-79.965  Az status=0008  Ze status=0009
12:42:54 Check angles
12:42:54 SkyScan query
12:42:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.56<-15904  Statuses=0008 0009
12:42:55 Msec=3000  True Az=112.995  Ze=-58.56  Az status=0008  Ze status=0009
12:42:55 Check angles
12:42:55 SkyScan query
12:42:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.62<-14508  Statuses=0008 0009
12:42:55 Msec=3750  True Az=112.995  Ze=-37.62  Az status=0008  Ze status=0009
12:42:56 Check angles
12:42:56 SkyScan query
12:42:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.635<-13109  Statuses=0008 0009
12:42:56 Msec=4500  True Az=112.995  Ze=-16.635  Az status=0008  Ze status=0009
12:42:56 Check angles
12:42:56 SkyScan query
12:42:57 SkyScan query done: ret=0  az=112.995<-7533  ze=4.26<-11716  Statuses=0008 0009
12:42:57 Msec=5250  True Az=112.995  Ze=4.26  Az status=0008  Ze status=0009
12:42:57 Check angles
12:42:57 SkyScan query
12:42:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:42:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:42:58 Message to Master queued w/err=0: serial=193957 error=0
12:43:03 Received message from Master: op=Filter serial=193958
12:43:03 Color wheel filter change from 0 to 0
12:43:03 FLIGetFilterPos err=0  currentPosition=0
12:43:03 FLIGetStepsRemaining err=0  RemainingSteps=0
12:43:03 Filter is already there-color wheel unchanged
12:43:03 Received message from Master: op=Shutter serial=193959
12:43:03 Shutter LASER close
12:43:03 Received message from Camera: op=State serial=193961
12:43:03 GetSingleValue result=40  Value=cccccccc
12:43:03 SkyScan query
12:43:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:43:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:43:04 Parameters OK
12:43:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:43:04 Set A/D data flow result=40
12:43:04 Set A/D channel type result=40
12:43:04 Set A/D encoding result=40
12:43:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:43:04 Set channel filter=0.000000e+000  result=40
12:43:04 Config A/D  Result=40
12:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:43:04 Get A/D filter: -9.255963e+061  result=40
12:43:04 Get A/D value=-858993460  result=40
12:43:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:43:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:43:04 Parameters OK
12:43:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:43:04 Set A/D data flow result=40
12:43:04 Set A/D channel type result=40
12:43:04 Set A/D encoding result=40
12:43:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:43:04 Set channel filter=0.000000e+000  result=40
12:43:04 Config A/D  Result=40
12:43:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:43:04 Get A/D filter: -9.255963e+061  result=40
12:43:04 Get A/D value=-858993460  result=40
12:43:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:43:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:43:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:43:04 Aux=
12:43:04 Message to Camera, serial 193961 queued
12:43:41 Received message from Master: op=PointingHead serial=193974
12:43:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:43:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:43:41 Point started: ret=0
12:43:41 point_skyscan result=0
12:43:42 Check angles
12:43:42 SkyScan query
12:43:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:43:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:43:42 Message to Master queued w/err=0: serial=193974 error=0
12:43:47 Received message from Master: op=Filter serial=193975
12:43:47 Color wheel filter change from 0 to 0
12:43:47 FLIGetFilterPos err=0  currentPosition=0
12:43:47 FLIGetStepsRemaining err=0  RemainingSteps=0
12:43:47 Filter is already there-color wheel unchanged
12:43:47 Received message from Master: op=Shutter serial=193976
12:43:47 Shutter LASER close
12:43:47 Received message from Camera: op=State serial=193978
12:43:47 GetSingleValue result=40  Value=cccccccc
12:43:47 SkyScan query
12:43:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:43:48 Parameters OK
12:43:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:43:48 Set A/D data flow result=40
12:43:48 Set A/D channel type result=40
12:43:48 Set A/D encoding result=40
12:43:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:43:48 Set channel filter=0.000000e+000  result=40
12:43:48 Config A/D  Result=40
12:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:43:48 Get A/D filter: -9.255963e+061  result=40
12:43:48 Get A/D value=-858993460  result=40
12:43:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:43:48 Parameters OK
12:43:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:43:48 Set A/D data flow result=40
12:43:48 Set A/D channel type result=40
12:43:48 Set A/D encoding result=40
12:43:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:43:48 Set channel filter=0.000000e+000  result=40
12:43:48 Config A/D  Result=40
12:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:43:48 Get A/D filter: -9.255963e+061  result=40
12:43:48 Get A/D value=-858993460  result=40
12:43:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:43:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:43:48 Aux=
12:43:48 Message to Camera, serial 193978 queued
[UTC 2019-3-9  12:43:48]
12:44:25 Received message from Master: op=PointingHead serial=193991
12:44:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:44:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:44:25 Point started: ret=0
12:44:25 point_skyscan result=0
12:44:26 Check angles
12:44:26 SkyScan query
12:44:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:44:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:44:26 Message to Master queued w/err=0: serial=193991 error=0
12:44:31 Received message from Master: op=Filter serial=193992
12:44:31 Color wheel filter change from 0 to 0
12:44:31 FLIGetFilterPos err=0  currentPosition=0
12:44:31 FLIGetStepsRemaining err=0  RemainingSteps=0
12:44:31 Filter is already there-color wheel unchanged
12:44:32 Received message from Master: op=Shutter serial=193993
12:44:32 Shutter LASER close
12:44:32 Received message from Camera: op=State serial=193995
12:44:32 GetSingleValue result=40  Value=cccccccc
12:44:32 SkyScan query
12:44:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:44:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:44:32 Parameters OK
12:44:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:44:32 Set A/D data flow result=40
12:44:32 Set A/D channel type result=40
12:44:32 Set A/D encoding result=40
12:44:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:44:32 Set channel filter=0.000000e+000  result=40
12:44:32 Config A/D  Result=40
12:44:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:44:32 Get A/D filter: -9.255963e+061  result=40
12:44:32 Get A/D value=-858993460  result=40
12:44:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:44:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:44:32 Parameters OK
12:44:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:44:32 Set A/D data flow result=40
12:44:32 Set A/D channel type result=40
12:44:32 Set A/D encoding result=40
12:44:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:44:32 Set channel filter=0.000000e+000  result=40
12:44:32 Config A/D  Result=40
12:44:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:44:32 Get A/D filter: -9.255963e+061  result=40
12:44:32 Get A/D value=-858993460  result=40
12:44:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:44:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:44:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:44:32 Aux=
12:44:32 Message to Camera, serial 193995 queued
12:45:09 Received message from Master: op=PointingHead serial=194008
12:45:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:45:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:45:09 Point started: ret=0
12:45:09 point_skyscan result=0
12:45:10 Check angles
12:45:10 SkyScan query
12:45:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:45:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:45:11 Message to Master queued w/err=0: serial=194008 error=0
12:45:16 Received message from Master: op=Filter serial=194009
12:45:16 Color wheel filter change from 0 to 0
12:45:16 FLIGetFilterPos err=0  currentPosition=0
12:45:16 FLIGetStepsRemaining err=0  RemainingSteps=0
12:45:16 Filter is already there-color wheel unchanged
12:45:16 Received message from Master: op=Shutter serial=194010
12:45:16 Shutter LASER close
12:45:16 Received message from Camera: op=State serial=194012
12:45:16 GetSingleValue result=40  Value=cccccccc
12:45:16 SkyScan query
12:45:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:45:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:45:17 Parameters OK
12:45:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:45:17 Set A/D data flow result=40
12:45:17 Set A/D channel type result=40
12:45:17 Set A/D encoding result=40
12:45:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:45:17 Set channel filter=0.000000e+000  result=40
12:45:17 Config A/D  Result=40
12:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:45:17 Get A/D filter: -9.255963e+061  result=40
12:45:17 Get A/D value=-858993460  result=40
12:45:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:45:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:45:17 Parameters OK
12:45:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:45:17 Set A/D data flow result=40
12:45:17 Set A/D channel type result=40
12:45:17 Set A/D encoding result=40
12:45:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:45:17 Set channel filter=0.000000e+000  result=40
12:45:17 Config A/D  Result=40
12:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:45:17 Get A/D filter: -9.255963e+061  result=40
12:45:17 Get A/D value=-858993460  result=40
12:45:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:45:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:45:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:45:17 Aux=
12:45:17 Message to Camera, serial 194012 queued
12:45:53 Received message from Master: op=PointingHead serial=194025
12:45:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:45:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:45:54 Point started: ret=0
12:45:54 point_skyscan result=0
12:45:55 Check angles
12:45:55 SkyScan query
12:45:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.295<-13553  Statuses=0008 0009
12:45:55 Msec=0  True Az=112.995  Ze=-23.295  Az status=0008  Ze status=0009
12:45:55 Check angles
12:45:55 SkyScan query
12:45:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.28<-14952  Statuses=0008 0009
12:45:56 Msec=750  True Az=112.995  Ze=-44.28  Az status=0008  Ze status=0009
12:45:56 Check angles
12:45:56 SkyScan query
12:45:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.655<-16377  Statuses=0008 0009
12:45:57 Msec=1500  True Az=112.995  Ze=-65.655  Az status=0008  Ze status=0009
12:45:57 Check angles
12:45:57 SkyScan query
12:45:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.61<-17774  Statuses=0008 0009
12:45:57 Msec=2250  True Az=112.995  Ze=-86.61  Az status=0008  Ze status=0009
12:45:58 Check angles
12:45:58 SkyScan query
12:45:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.565<-19171  Statuses=0008 0009
12:45:58 Msec=3000  True Az=112.995  Ze=-107.565  Az status=0008  Ze status=0009
12:45:58 Check angles
12:45:58 SkyScan query
12:45:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.94<-20596  Statuses=0008 0009
12:45:59 Msec=3750  True Az=112.995  Ze=-128.94  Az status=0008  Ze status=0009
12:45:59 Check angles
12:45:59 SkyScan query
12:46:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.345<-22023  Statuses=0008 0009
12:46:00 Msec=4500  True Az=112.995  Ze=-150.345  Az status=0008  Ze status=0009
12:46:00 Check angles
12:46:00 SkyScan query
12:46:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.12<-23408  Statuses=0008 0009
12:46:00 Msec=5250  True Az=112.995  Ze=-171.12  Az status=0008  Ze status=0009
12:46:01 Check angles
12:46:01 SkyScan query
12:46:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:46:01 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:46:01 Message to Master queued w/err=0: serial=194025 error=0
12:46:06 Received message from Master: op=Filter serial=194026
12:46:06 Color wheel filter change from 0 to 0
12:46:06 FLIGetFilterPos err=0  currentPosition=0
12:46:06 FLIGetStepsRemaining err=0  RemainingSteps=0
12:46:06 Filter is already there-color wheel unchanged
12:46:06 Received message from Master: op=Shutter serial=194027
12:46:06 Shutter LASER open
12:46:06 Received message from Camera: op=State serial=194029
12:46:06 GetSingleValue result=40  Value=cccccccc
12:46:06 SkyScan query
12:46:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:46:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:46:07 Parameters OK
12:46:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:46:07 Set A/D data flow result=40
12:46:07 Set A/D channel type result=40
12:46:07 Set A/D encoding result=40
12:46:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:46:07 Set channel filter=0.000000e+000  result=40
12:46:07 Config A/D  Result=40
12:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:46:07 Get A/D filter: -9.255963e+061  result=40
12:46:07 Get A/D value=-858993460  result=40
12:46:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:46:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:46:07 Parameters OK
12:46:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:46:07 Set A/D data flow result=40
12:46:07 Set A/D channel type result=40
12:46:07 Set A/D encoding result=40
12:46:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:46:07 Set channel filter=0.000000e+000  result=40
12:46:07 Config A/D  Result=40
12:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:46:07 Get A/D filter: -9.255963e+061  result=40
12:46:07 Get A/D value=-858993460  result=40
12:46:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:46:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:46:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:46:07 Aux=
12:46:07 Message to Camera, serial 194029 queued
12:46:15 Received message from Master: op=Shutter serial=194039
12:46:15 Shutter LASER close
12:46:16 Received message from Master: op=PointingHead serial=194043
12:46:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:46:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:46:16 Point started: ret=0
12:46:16 point_skyscan result=0
12:46:17 Check angles
12:46:17 SkyScan query
12:46:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
12:46:18 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
12:46:18 Check angles
12:46:18 SkyScan query
12:46:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.025<-20135  Statuses=0008 0009
12:46:19 Msec=750  True Az=112.995  Ze=-122.025  Az status=0008  Ze status=0009
12:46:19 Check angles
12:46:19 SkyScan query
12:46:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.085<-18739  Statuses=0008 0009
12:46:19 Msec=1500  True Az=112.995  Ze=-101.085  Az status=0008  Ze status=0009
12:46:19 Check angles
12:46:19 SkyScan query
12:46:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.13<-17342  Statuses=0008 0009
12:46:20 Msec=2250  True Az=112.995  Ze=-80.13  Az status=0008  Ze status=0009
12:46:20 Check angles
12:46:20 SkyScan query
12:46:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.19<-15946  Statuses=0008 0009
12:46:21 Msec=3000  True Az=112.995  Ze=-59.19  Az status=0008  Ze status=0009
12:46:21 Check angles
12:46:21 SkyScan query
12:46:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.22<-14548  Statuses=0008 0009
12:46:22 Msec=3750  True Az=112.995  Ze=-38.22  Az status=0008  Ze status=0009
12:46:22 Check angles
12:46:22 SkyScan query
12:46:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
12:46:22 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
12:46:22 Check angles
12:46:22 SkyScan query
12:46:23 SkyScan query done: ret=0  az=112.995<-7533  ze=3.705<-11753  Statuses=0008 0009
12:46:23 Msec=5250  True Az=112.995  Ze=3.705  Az status=0008  Ze status=0009
12:46:23 Check angles
12:46:23 SkyScan query
12:46:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:46:24 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:46:24 Message to Master queued w/err=0: serial=194043 error=0
12:46:29 Received message from Master: op=Filter serial=194044
12:46:29 Color wheel filter change from 0 to 0
12:46:29 FLIGetFilterPos err=0  currentPosition=0
12:46:29 FLIGetStepsRemaining err=0  RemainingSteps=0
12:46:29 Filter is already there-color wheel unchanged
12:46:29 Received message from Master: op=Shutter serial=194045
12:46:29 Shutter LASER close
12:46:29 Received message from Camera: op=State serial=194047
12:46:29 GetSingleValue result=40  Value=cccccccc
12:46:29 SkyScan query
12:46:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:46:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:46:30 Parameters OK
12:46:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:46:30 Set A/D data flow result=40
12:46:30 Set A/D channel type result=40
12:46:30 Set A/D encoding result=40
12:46:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:46:30 Set channel filter=0.000000e+000  result=40
12:46:30 Config A/D  Result=40
12:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:46:30 Get A/D filter: -9.255963e+061  result=40
12:46:30 Get A/D value=-858993460  result=40
12:46:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:46:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:46:30 Parameters OK
12:46:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:46:30 Set A/D data flow result=40
12:46:30 Set A/D channel type result=40
12:46:30 Set A/D encoding result=40
12:46:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:46:30 Set channel filter=0.000000e+000  result=40
12:46:30 Config A/D  Result=40
12:46:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:46:30 Get A/D filter: -9.255963e+061  result=40
12:46:30 Get A/D value=-858993460  result=40
12:46:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:46:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:46:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:46:30 Aux=
12:46:30 Message to Camera, serial 194047 queued
12:47:07 Received message from Master: op=PointingHead serial=194060
12:47:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:47:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:47:07 Point started: ret=0
12:47:07 point_skyscan result=0
12:47:08 Check angles
12:47:08 SkyScan query
12:47:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:47:08 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:47:08 Message to Master queued w/err=0: serial=194060 error=0
12:47:13 Received message from Master: op=Filter serial=194061
12:47:13 Color wheel filter change from 0 to 0
12:47:13 FLIGetFilterPos err=0  currentPosition=0
12:47:13 FLIGetStepsRemaining err=0  RemainingSteps=0
12:47:13 Filter is already there-color wheel unchanged
12:47:13 Received message from Master: op=Shutter serial=194062
12:47:13 Shutter LASER close
12:47:13 Received message from Camera: op=State serial=194064
12:47:13 GetSingleValue result=40  Value=cccccccc
12:47:13 SkyScan query
12:47:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:47:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:47:14 Parameters OK
12:47:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:47:14 Set A/D data flow result=40
12:47:14 Set A/D channel type result=40
12:47:14 Set A/D encoding result=40
12:47:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:47:14 Set channel filter=0.000000e+000  result=40
12:47:14 Config A/D  Result=40
12:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:47:14 Get A/D filter: -9.255963e+061  result=40
12:47:14 Get A/D value=-858993460  result=40
12:47:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:47:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:47:14 Parameters OK
12:47:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:47:14 Set A/D data flow result=40
12:47:14 Set A/D channel type result=40
12:47:14 Set A/D encoding result=40
12:47:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:47:14 Set channel filter=0.000000e+000  result=40
12:47:14 Config A/D  Result=40
12:47:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:47:14 Get A/D filter: -9.255963e+061  result=40
12:47:14 Get A/D value=-858993460  result=40
12:47:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:47:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:47:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:47:14 Aux=
12:47:14 Message to Camera, serial 194064 queued
12:47:51 Received message from Master: op=PointingHead serial=194077
12:47:51 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:47:51 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:47:51 Point started: ret=0
12:47:51 point_skyscan result=0
12:47:52 Check angles
12:47:52 SkyScan query
12:47:53 SkyScan query done: ret=0  az=136.005<-9067  ze=-6.51<-12434  Statuses=0009 0008
12:47:53 Msec=0  True Az=136.005  Ze=-6.51  Az status=0009  Ze status=0008
12:47:53 Check angles
12:47:53 SkyScan query
12:47:53 SkyScan query done: ret=0  az=153.915<-10261  ze=-6.495<-12433  Statuses=0009 0008
12:47:53 Msec=750  True Az=153.915  Ze=-6.495  Az status=0009  Ze status=0008
12:47:54 Check angles
12:47:54 SkyScan query
12:47:54 SkyScan query done: ret=0  az=171.765<-11451  ze=-6.495<-12433  Statuses=0009 0008
12:47:54 Msec=1500  True Az=171.765  Ze=-6.495  Az status=0009  Ze status=0008
12:47:54 Check angles
12:47:54 SkyScan query
12:47:55 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:47:55 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:47:55 Message to Master queued w/err=0: serial=194077 error=0
12:48:00 Received message from Master: op=Filter serial=194078
12:48:00 Color wheel filter change from 0 to 0
12:48:00 FLIGetFilterPos err=0  currentPosition=0
12:48:00 FLIGetStepsRemaining err=0  RemainingSteps=0
12:48:00 Filter is already there-color wheel unchanged
12:48:00 Received message from Master: op=Shutter serial=194079
12:48:00 Shutter LASER close
12:48:00 Received message from Camera: op=State serial=194081
12:48:00 GetSingleValue result=40  Value=cccccccc
12:48:00 SkyScan query
12:48:01 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:48:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:48:01 Parameters OK
12:48:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:48:01 Set A/D data flow result=40
12:48:01 Set A/D channel type result=40
12:48:01 Set A/D encoding result=40
12:48:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:48:01 Set channel filter=0.000000e+000  result=40
12:48:01 Config A/D  Result=40
12:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:48:01 Get A/D filter: -9.255963e+061  result=40
12:48:01 Get A/D value=-858993460  result=40
12:48:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:48:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:48:01 Parameters OK
12:48:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:48:01 Set A/D data flow result=40
12:48:01 Set A/D channel type result=40
12:48:01 Set A/D encoding result=40
12:48:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:48:01 Set channel filter=0.000000e+000  result=40
12:48:01 Config A/D  Result=40
12:48:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:48:01 Get A/D filter: -9.255963e+061  result=40
12:48:01 Get A/D value=-858993460  result=40
12:48:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:48:01 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:48:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:48:01 Aux=
12:48:01 Message to Camera, serial 194081 queued
12:48:37 Received message from Master: op=PointingHead serial=194093
12:48:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:48:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:48:37 Point started: ret=0
12:48:37 point_skyscan result=0
12:48:38 Check angles
12:48:38 SkyScan query
12:48:38 SkyScan query done: ret=0  az=153.15<-10210  ze=6.51<-11566  Statuses=0009 0008
12:48:38 Msec=0  True Az=153.15  Ze=6.51  Az status=0009  Ze status=0008
12:48:38 Check angles
12:48:38 SkyScan query
12:48:39 SkyScan query done: ret=0  az=135.675<-9045  ze=6.495<-11567  Statuses=0009 0008
12:48:39 Msec=750  True Az=135.675  Ze=6.495  Az status=0009  Ze status=0008
12:48:39 Check angles
12:48:39 SkyScan query
12:48:40 SkyScan query done: ret=0  az=118.215<-7881  ze=6.495<-11567  Statuses=0009 0008
12:48:40 Msec=1500  True Az=118.215  Ze=6.495  Az status=0009  Ze status=0008
12:48:40 Check angles
12:48:40 SkyScan query
12:48:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:48:40 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:48:40 Message to Master queued w/err=0: serial=194093 error=0
12:48:45 Received message from Master: op=Filter serial=194094
12:48:45 Color wheel filter change from 0 to 0
12:48:45 FLIGetFilterPos err=0  currentPosition=0
12:48:45 FLIGetStepsRemaining err=0  RemainingSteps=0
12:48:45 Filter is already there-color wheel unchanged
12:48:46 Received message from Master: op=Shutter serial=194095
12:48:46 Shutter LASER close
12:48:46 Received message from Camera: op=State serial=194097
12:48:46 GetSingleValue result=40  Value=cccccccc
12:48:46 SkyScan query
12:48:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:48:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:48:46 Parameters OK
12:48:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:48:46 Set A/D data flow result=40
12:48:46 Set A/D channel type result=40
12:48:46 Set A/D encoding result=40
12:48:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:48:46 Set channel filter=0.000000e+000  result=40
12:48:46 Config A/D  Result=40
12:48:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:48:46 Get A/D filter: -9.255963e+061  result=40
12:48:46 Get A/D value=-858993460  result=40
12:48:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:48:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:48:46 Parameters OK
12:48:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:48:46 Set A/D data flow result=40
12:48:46 Set A/D channel type result=40
12:48:46 Set A/D encoding result=40
12:48:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:48:46 Set channel filter=0.000000e+000  result=40
12:48:46 Config A/D  Result=40
12:48:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:48:46 Get A/D filter: -9.255963e+061  result=40
12:48:46 Get A/D value=-858993460  result=40
12:48:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:48:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:48:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:48:46 Aux=
12:48:46 Message to Camera, serial 194097 queued
12:49:23 Received message from Master: op=PointingHead serial=194110
12:49:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:49:23 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:49:23 Point started: ret=0
12:49:23 point_skyscan result=0
12:49:24 Check angles
12:49:24 SkyScan query
12:49:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.61<-13574  Statuses=0008 0009
12:49:25 Msec=0  True Az=112.995  Ze=-23.61  Az status=0008  Ze status=0009
12:49:25 Check angles
12:49:25 SkyScan query
12:49:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.565<-14971  Statuses=0008 0009
12:49:25 Msec=750  True Az=112.995  Ze=-44.565  Az status=0008  Ze status=0009
12:49:26 Check angles
12:49:26 SkyScan query
12:49:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.505<-16367  Statuses=0008 0009
12:49:26 Msec=1500  True Az=112.995  Ze=-65.505  Az status=0008  Ze status=0009
12:49:26 Check angles
12:49:26 SkyScan query
12:49:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.475<-17765  Statuses=0008 0009
12:49:27 Msec=2250  True Az=112.995  Ze=-86.475  Az status=0008  Ze status=0009
12:49:27 Check angles
12:49:27 SkyScan query
12:49:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.4<-19160  Statuses=0008 0009
12:49:28 Msec=3000  True Az=112.995  Ze=-107.4  Az status=0008  Ze status=0009
12:49:28 Check angles
12:49:28 SkyScan query
12:49:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.775<-20585  Statuses=0008 0009
12:49:28 Msec=3750  True Az=112.995  Ze=-128.775  Az status=0008  Ze status=0009
12:49:29 Check angles
12:49:29 SkyScan query
12:49:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.73<-21982  Statuses=0008 0009
12:49:29 Msec=4500  True Az=112.995  Ze=-149.73  Az status=0008  Ze status=0009
12:49:29 Check angles
12:49:29 SkyScan query
12:49:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.67<-23378  Statuses=0008 0009
12:49:30 Msec=5250  True Az=112.995  Ze=-170.67  Az status=0008  Ze status=0009
12:49:30 Check angles
12:49:30 SkyScan query
12:49:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:49:31 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:49:31 Message to Master queued w/err=0: serial=194110 error=0
12:49:36 Received message from Master: op=Filter serial=194111
12:49:36 Color wheel filter change from 0 to 0
12:49:36 FLIGetFilterPos err=0  currentPosition=0
12:49:36 FLIGetStepsRemaining err=0  RemainingSteps=0
12:49:36 Filter is already there-color wheel unchanged
12:49:36 Received message from Master: op=Shutter serial=194112
12:49:36 Shutter LASER open
12:49:36 Received message from Camera: op=State serial=194114
12:49:36 GetSingleValue result=40  Value=cccccccc
12:49:36 SkyScan query
12:49:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:49:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:49:37 Parameters OK
12:49:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:49:37 Set A/D data flow result=40
12:49:37 Set A/D channel type result=40
12:49:37 Set A/D encoding result=40
12:49:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:49:37 Set channel filter=0.000000e+000  result=40
12:49:37 Config A/D  Result=40
12:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:49:37 Get A/D filter: -9.255963e+061  result=40
12:49:37 Get A/D value=-858993460  result=40
12:49:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:49:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:49:37 Parameters OK
12:49:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:49:37 Set A/D data flow result=40
12:49:37 Set A/D channel type result=40
12:49:37 Set A/D encoding result=40
12:49:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:49:37 Set channel filter=0.000000e+000  result=40
12:49:37 Config A/D  Result=40
12:49:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:49:37 Get A/D filter: -9.255963e+061  result=40
12:49:37 Get A/D value=-858993460  result=40
12:49:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:49:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:49:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:49:37 Aux=
12:49:37 Message to Camera, serial 194114 queued
12:49:45 Received message from Master: op=Shutter serial=194124
12:49:45 Shutter LASER close
12:49:46 Received message from Master: op=PointingHead serial=194128
12:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:49:46 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:49:46 Point started: ret=0
12:49:46 point_skyscan result=0
12:49:47 Check angles
12:49:47 SkyScan query
12:49:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.815<-21521  Statuses=0008 0009
12:49:47 Msec=0  True Az=112.995  Ze=-142.815  Az status=0008  Ze status=0009
12:49:47 Check angles
12:49:47 SkyScan query
12:49:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.845<-20123  Statuses=0008 0009
12:49:48 Msec=750  True Az=112.995  Ze=-121.845  Az status=0008  Ze status=0009
12:49:48 Check angles
12:49:48 SkyScan query
12:49:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.485<-18699  Statuses=0008 0009
12:49:49 Msec=1500  True Az=112.995  Ze=-100.485  Az status=0008  Ze status=0009
12:49:49 Check angles
12:49:49 SkyScan query
12:49:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.11<-17274  Statuses=0008 0009
12:49:49 Msec=2250  True Az=112.995  Ze=-79.11  Az status=0008  Ze status=0009
12:49:50 Check angles
12:49:50 SkyScan query
12:49:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.705<-15847  Statuses=0008 0009
12:49:50 Msec=3000  True Az=112.995  Ze=-57.705  Az status=0008  Ze status=0009
12:49:50 Check angles
12:49:50 SkyScan query
12:49:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.75<-14450  Statuses=0008 0009
12:49:51 Msec=3750  True Az=112.995  Ze=-36.75  Az status=0008  Ze status=0009
12:49:51 Check angles
12:49:51 SkyScan query
12:49:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.78<-13052  Statuses=0008 0009
12:49:52 Msec=4500  True Az=112.995  Ze=-15.78  Az status=0008  Ze status=0009
12:49:52 Check angles
12:49:52 SkyScan query
12:49:53 SkyScan query done: ret=0  az=112.995<-7533  ze=4.905<-11673  Statuses=0008 0009
12:49:53 Msec=5250  True Az=112.995  Ze=4.905  Az status=0008  Ze status=0009
12:49:53 Check angles
12:49:53 SkyScan query
12:49:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:49:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:49:53 Message to Master queued w/err=0: serial=194128 error=0
12:49:58 Received message from Master: op=Filter serial=194129
12:49:58 Color wheel filter change from 0 to 0
12:49:58 FLIGetFilterPos err=0  currentPosition=0
12:49:58 FLIGetStepsRemaining err=0  RemainingSteps=0
12:49:58 Filter is already there-color wheel unchanged
12:49:58 Received message from Master: op=Shutter serial=194130
12:49:58 Shutter LASER close
12:49:59 Received message from Camera: op=State serial=194132
12:49:59 GetSingleValue result=40  Value=cccccccc
12:49:59 SkyScan query
12:49:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:49:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:49:59 Parameters OK
12:49:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:49:59 Set A/D data flow result=40
12:49:59 Set A/D channel type result=40
12:49:59 Set A/D encoding result=40
12:49:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:49:59 Set channel filter=0.000000e+000  result=40
12:49:59 Config A/D  Result=40
12:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:49:59 Get A/D filter: -9.255963e+061  result=40
12:49:59 Get A/D value=-858993460  result=40
12:49:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:49:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:49:59 Parameters OK
12:49:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:49:59 Set A/D data flow result=40
12:49:59 Set A/D channel type result=40
12:49:59 Set A/D encoding result=40
12:49:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:49:59 Set channel filter=0.000000e+000  result=40
12:49:59 Config A/D  Result=40
12:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:49:59 Get A/D filter: -9.255963e+061  result=40
12:49:59 Get A/D value=-858993460  result=40
12:49:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:49:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:49:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:49:59 Aux=
12:49:59 Message to Camera, serial 194132 queued
12:50:36 Received message from Master: op=PointingHead serial=194145
12:50:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:50:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:50:36 Point started: ret=0
12:50:36 point_skyscan result=0
12:50:37 Check angles
12:50:37 SkyScan query
12:50:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:50:38 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:50:38 Message to Master queued w/err=0: serial=194145 error=0
12:50:43 Received message from Master: op=Filter serial=194146
12:50:43 Color wheel filter change from 0 to 0
12:50:43 FLIGetFilterPos err=0  currentPosition=0
12:50:43 FLIGetStepsRemaining err=0  RemainingSteps=0
12:50:43 Filter is already there-color wheel unchanged
12:50:43 Received message from Master: op=Shutter serial=194147
12:50:43 Shutter LASER close
12:50:43 Received message from Camera: op=State serial=194149
12:50:43 GetSingleValue result=40  Value=cccccccc
12:50:43 SkyScan query
12:50:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:50:43 Parameters OK
12:50:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:50:43 Set A/D data flow result=40
12:50:43 Set A/D channel type result=40
12:50:43 Set A/D encoding result=40
12:50:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:50:43 Set channel filter=0.000000e+000  result=40
12:50:43 Config A/D  Result=40
12:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:50:43 Get A/D filter: -9.255963e+061  result=40
12:50:43 Get A/D value=-858993460  result=40
12:50:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:50:43 Parameters OK
12:50:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:50:43 Set A/D data flow result=40
12:50:43 Set A/D channel type result=40
12:50:43 Set A/D encoding result=40
12:50:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:50:43 Set channel filter=0.000000e+000  result=40
12:50:43 Config A/D  Result=40
12:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:50:43 Get A/D filter: -9.255963e+061  result=40
12:50:43 Get A/D value=-858993460  result=40
12:50:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:50:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:50:43 Aux=
12:50:43 Message to Camera, serial 194149 queued
12:51:20 Received message from Master: op=PointingHead serial=194162
12:51:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:51:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:51:21 Point started: ret=0
12:51:21 point_skyscan result=0
12:51:21 Check angles
12:51:21 SkyScan query
12:51:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:51:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:51:22 Message to Master queued w/err=0: serial=194162 error=0
12:51:27 Received message from Master: op=Filter serial=194163
12:51:27 Color wheel filter change from 0 to 0
12:51:27 FLIGetFilterPos err=0  currentPosition=0
12:51:27 FLIGetStepsRemaining err=0  RemainingSteps=0
12:51:27 Filter is already there-color wheel unchanged
12:51:27 Received message from Master: op=Shutter serial=194164
12:51:27 Shutter LASER close
12:51:27 Received message from Camera: op=State serial=194166
12:51:27 GetSingleValue result=40  Value=cccccccc
12:51:27 SkyScan query
12:51:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:51:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:51:28 Parameters OK
12:51:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:51:28 Set A/D data flow result=40
12:51:28 Set A/D channel type result=40
12:51:28 Set A/D encoding result=40
12:51:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:51:28 Set channel filter=0.000000e+000  result=40
12:51:28 Config A/D  Result=40
12:51:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:51:28 Get A/D filter: -9.255963e+061  result=40
12:51:28 Get A/D value=-858993460  result=40
12:51:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:51:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:51:28 Parameters OK
12:51:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:51:28 Set A/D data flow result=40
12:51:28 Set A/D channel type result=40
12:51:28 Set A/D encoding result=40
12:51:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:51:28 Set channel filter=0.000000e+000  result=40
12:51:28 Config A/D  Result=40
12:51:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:51:28 Get A/D filter: -9.255963e+061  result=40
12:51:28 Get A/D value=-858993460  result=40
12:51:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:51:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:51:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:51:28 Aux=
12:51:28 Message to Camera, serial 194166 queued
12:52:05 Received message from Master: op=PointingHead serial=194179
12:52:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:52:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:52:05 Point started: ret=0
12:52:05 point_skyscan result=0
12:52:06 Check angles
12:52:06 SkyScan query
12:52:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:52:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:52:06 Message to Master queued w/err=0: serial=194179 error=0
12:52:11 Received message from Master: op=Filter serial=194180
12:52:11 Color wheel filter change from 0 to 0
12:52:11 FLIGetFilterPos err=0  currentPosition=0
12:52:11 FLIGetStepsRemaining err=0  RemainingSteps=0
12:52:11 Filter is already there-color wheel unchanged
12:52:12 Received message from Master: op=Shutter serial=194181
12:52:12 Shutter LASER close
12:52:12 Received message from Camera: op=State serial=194183
12:52:12 GetSingleValue result=40  Value=cccccccc
12:52:12 SkyScan query
12:52:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:52:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:52:12 Parameters OK
12:52:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:52:12 Set A/D data flow result=40
12:52:12 Set A/D channel type result=40
12:52:12 Set A/D encoding result=40
12:52:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:52:12 Set channel filter=0.000000e+000  result=40
12:52:12 Config A/D  Result=40
12:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:52:12 Get A/D filter: -9.255963e+061  result=40
12:52:12 Get A/D value=-858993460  result=40
12:52:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:52:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:52:12 Parameters OK
12:52:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:52:12 Set A/D data flow result=40
12:52:12 Set A/D channel type result=40
12:52:12 Set A/D encoding result=40
12:52:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:52:12 Set channel filter=0.000000e+000  result=40
12:52:12 Config A/D  Result=40
12:52:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:52:12 Get A/D filter: -9.255963e+061  result=40
12:52:12 Get A/D value=-858993460  result=40
12:52:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:52:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:52:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:52:12 Aux=
12:52:12 Message to Camera, serial 194183 queued
12:52:49 Received message from Master: op=PointingHead serial=194196
12:52:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:52:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:52:49 Point started: ret=0
12:52:49 point_skyscan result=0
12:52:50 Check angles
12:52:50 SkyScan query
12:52:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.145<-13543  Statuses=0008 0009
12:52:51 Msec=0  True Az=112.995  Ze=-23.145  Az status=0008  Ze status=0009
12:52:51 Check angles
12:52:51 SkyScan query
12:52:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
12:52:51 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
12:52:52 Check angles
12:52:52 SkyScan query
12:52:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.52<-16368  Statuses=0008 0009
12:52:52 Msec=1500  True Az=112.995  Ze=-65.52  Az status=0008  Ze status=0009
12:52:52 Check angles
12:52:52 SkyScan query
12:52:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.46<-17764  Statuses=0008 0009
12:52:53 Msec=2250  True Az=112.995  Ze=-86.46  Az status=0008  Ze status=0009
12:52:53 Check angles
12:52:53 SkyScan query
12:52:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.445<-19163  Statuses=0008 0009
12:52:54 Msec=3000  True Az=112.995  Ze=-107.445  Az status=0008  Ze status=0009
12:52:54 Check angles
12:52:54 SkyScan query
12:52:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.79<-20586  Statuses=0008 0009
12:52:54 Msec=3750  True Az=112.995  Ze=-128.79  Az status=0008  Ze status=0009
12:52:55 Check angles
12:52:55 SkyScan query
12:52:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.745<-21983  Statuses=0008 0009
12:52:55 Msec=4500  True Az=112.995  Ze=-149.745  Az status=0008  Ze status=0009
12:52:55 Check angles
12:52:55 SkyScan query
12:52:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.655<-23377  Statuses=0008 0009
12:52:56 Msec=5250  True Az=112.995  Ze=-170.655  Az status=0008  Ze status=0009
12:52:56 Check angles
12:52:56 SkyScan query
12:52:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:52:57 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:52:57 Message to Master queued w/err=0: serial=194196 error=0
12:53:02 Received message from Master: op=Filter serial=194197
12:53:02 Color wheel filter change from 0 to 0
12:53:02 FLIGetFilterPos err=0  currentPosition=0
12:53:02 FLIGetStepsRemaining err=0  RemainingSteps=0
12:53:02 Filter is already there-color wheel unchanged
12:53:02 Received message from Master: op=Shutter serial=194198
12:53:02 Shutter LASER open
12:53:02 Received message from Camera: op=State serial=194200
12:53:02 GetSingleValue result=40  Value=cccccccc
12:53:02 SkyScan query
12:53:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:53:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:53:03 Parameters OK
12:53:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:53:03 Set A/D data flow result=40
12:53:03 Set A/D channel type result=40
12:53:03 Set A/D encoding result=40
12:53:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:53:03 Set channel filter=0.000000e+000  result=40
12:53:03 Config A/D  Result=40
12:53:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:53:03 Get A/D filter: -9.255963e+061  result=40
12:53:03 Get A/D value=-858993460  result=40
12:53:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:53:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:53:03 Parameters OK
12:53:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:53:03 Set A/D data flow result=40
12:53:03 Set A/D channel type result=40
12:53:03 Set A/D encoding result=40
12:53:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:53:03 Set channel filter=0.000000e+000  result=40
12:53:03 Config A/D  Result=40
12:53:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:53:03 Get A/D filter: -9.255963e+061  result=40
12:53:03 Get A/D value=-858993460  result=40
12:53:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:53:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:53:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:53:03 Aux=
12:53:03 Message to Camera, serial 194200 queued
12:53:11 Received message from Master: op=Shutter serial=194210
12:53:11 Shutter LASER close
12:53:12 Received message from Master: op=PointingHead serial=194214
12:53:12 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:53:12 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:53:12 Point started: ret=0
12:53:12 point_skyscan result=0
12:53:13 Check angles
12:53:13 SkyScan query
12:53:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.13<-21542  Statuses=0008 0009
12:53:13 Msec=0  True Az=112.995  Ze=-143.13  Az status=0008  Ze status=0009
12:53:13 Check angles
12:53:13 SkyScan query
12:53:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
12:53:14 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
12:53:14 Check angles
12:53:14 SkyScan query
12:53:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.785<-18719  Statuses=0008 0009
12:53:15 Msec=1500  True Az=112.995  Ze=-100.785  Az status=0008  Ze status=0009
12:53:15 Check angles
12:53:15 SkyScan query
12:53:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.845<-17323  Statuses=0008 0009
12:53:16 Msec=2250  True Az=112.995  Ze=-79.845  Az status=0008  Ze status=0009
12:53:16 Check angles
12:53:16 SkyScan query
12:53:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.89<-15926  Statuses=0008 0009
12:53:16 Msec=3000  True Az=112.995  Ze=-58.89  Az status=0008  Ze status=0009
12:53:16 Check angles
12:53:16 SkyScan query
12:53:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.905<-14527  Statuses=0008 0009
12:53:17 Msec=3750  True Az=112.995  Ze=-37.905  Az status=0008  Ze status=0009
12:53:17 Check angles
12:53:17 SkyScan query
12:53:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.95<-13130  Statuses=0008 0009
12:53:18 Msec=4500  True Az=112.995  Ze=-16.95  Az status=0008  Ze status=0009
12:53:18 Check angles
12:53:18 SkyScan query
12:53:19 SkyScan query done: ret=0  az=112.995<-7533  ze=4.005<-11733  Statuses=0008 0009
12:53:19 Msec=5250  True Az=112.995  Ze=4.005  Az status=0008  Ze status=0009
12:53:19 Check angles
12:53:19 SkyScan query
12:53:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:53:19 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:53:19 Message to Master queued w/err=0: serial=194214 error=0
12:53:24 Received message from Master: op=Filter serial=194215
12:53:24 Color wheel filter change from 0 to 0
12:53:24 FLIGetFilterPos err=0  currentPosition=0
12:53:24 FLIGetStepsRemaining err=0  RemainingSteps=0
12:53:24 Filter is already there-color wheel unchanged
12:53:24 Received message from Master: op=Shutter serial=194216
12:53:24 Shutter LASER close
12:53:25 Received message from Camera: op=State serial=194218
12:53:25 GetSingleValue result=40  Value=cccccccc
12:53:25 SkyScan query
12:53:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:53:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:53:25 Parameters OK
12:53:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:53:25 Set A/D data flow result=40
12:53:25 Set A/D channel type result=40
12:53:25 Set A/D encoding result=40
12:53:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:53:25 Set channel filter=0.000000e+000  result=40
12:53:25 Config A/D  Result=40
12:53:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:53:25 Get A/D filter: -9.255963e+061  result=40
12:53:25 Get A/D value=-858993460  result=40
12:53:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:53:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:53:25 Parameters OK
12:53:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:53:25 Set A/D data flow result=40
12:53:25 Set A/D channel type result=40
12:53:25 Set A/D encoding result=40
12:53:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:53:25 Set channel filter=0.000000e+000  result=40
12:53:25 Config A/D  Result=40
12:53:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:53:25 Get A/D filter: -9.255963e+061  result=40
12:53:25 Get A/D value=-858993460  result=40
12:53:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:53:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:53:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:53:25 Aux=
12:53:25 Message to Camera, serial 194218 queued
12:54:02 Received message from Master: op=PointingHead serial=194231
12:54:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:54:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:54:02 Point started: ret=0
12:54:02 point_skyscan result=0
12:54:03 Check angles
12:54:03 SkyScan query
12:54:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:54:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:54:04 Message to Master queued w/err=0: serial=194231 error=0
12:54:09 Received message from Master: op=Filter serial=194232
12:54:09 Color wheel filter change from 0 to 0
12:54:09 FLIGetFilterPos err=0  currentPosition=0
12:54:09 FLIGetStepsRemaining err=0  RemainingSteps=0
12:54:09 Filter is already there-color wheel unchanged
12:54:09 Received message from Master: op=Shutter serial=194233
12:54:09 Shutter LASER close
12:54:09 Received message from Camera: op=State serial=194235
12:54:09 GetSingleValue result=40  Value=cccccccc
12:54:09 SkyScan query
12:54:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:54:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:54:09 Parameters OK
12:54:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:54:09 Set A/D data flow result=40
12:54:09 Set A/D channel type result=40
12:54:09 Set A/D encoding result=40
12:54:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:54:09 Set channel filter=0.000000e+000  result=40
12:54:09 Config A/D  Result=40
12:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:54:09 Get A/D filter: -9.255963e+061  result=40
12:54:09 Get A/D value=-858993460  result=40
12:54:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:54:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:54:09 Parameters OK
12:54:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:54:09 Set A/D data flow result=40
12:54:09 Set A/D channel type result=40
12:54:09 Set A/D encoding result=40
12:54:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:54:09 Set channel filter=0.000000e+000  result=40
12:54:09 Config A/D  Result=40
12:54:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:54:09 Get A/D filter: -9.255963e+061  result=40
12:54:09 Get A/D value=-858993460  result=40
12:54:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:54:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:54:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:54:09 Aux=
12:54:09 Message to Camera, serial 194235 queued
12:54:46 Received message from Master: op=PointingHead serial=194248
12:54:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
12:54:46 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
12:54:47 Point started: ret=0
12:54:47 point_skyscan result=0
12:54:47 Check angles
12:54:47 SkyScan query
12:54:48 SkyScan query done: ret=0  az=135.93<-9062  ze=-6.51<-12434  Statuses=0009 0008
12:54:48 Msec=0  True Az=135.93  Ze=-6.51  Az status=0009  Ze status=0008
12:54:48 Check angles
12:54:48 SkyScan query
12:54:49 SkyScan query done: ret=0  az=153.75<-10250  ze=-6.495<-12433  Statuses=0009 0008
[UTC 2019-3-9  12:54:49]
12:54:49 Msec=750  True Az=153.75  Ze=-6.495  Az status=0009  Ze status=0008
12:54:49 Check angles
12:54:49 SkyScan query
12:54:50 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.495<-12433  Statuses=0009 0008
12:54:50 Msec=1500  True Az=171.3  Ze=-6.495  Az status=0009  Ze status=0008
12:54:50 Check angles
12:54:50 SkyScan query
12:54:50 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:54:50 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
12:54:50 Message to Master queued w/err=0: serial=194248 error=0
12:54:55 Received message from Master: op=Filter serial=194249
12:54:55 Color wheel filter change from 0 to 0
12:54:55 FLIGetFilterPos err=0  currentPosition=0
12:54:55 FLIGetStepsRemaining err=0  RemainingSteps=0
12:54:55 Filter is already there-color wheel unchanged
12:54:55 Received message from Master: op=Shutter serial=194250
12:54:55 Shutter LASER close
12:54:56 Received message from Camera: op=State serial=194252
12:54:56 GetSingleValue result=40  Value=cccccccc
12:54:56 SkyScan query
12:54:56 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
12:54:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:54:56 Parameters OK
12:54:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:54:56 Set A/D data flow result=40
12:54:56 Set A/D channel type result=40
12:54:56 Set A/D encoding result=40
12:54:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:54:56 Set channel filter=0.000000e+000  result=40
12:54:56 Config A/D  Result=40
12:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:54:56 Get A/D filter: -9.255963e+061  result=40
12:54:56 Get A/D value=-858993460  result=40
12:54:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:54:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:54:56 Parameters OK
12:54:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:54:56 Set A/D data flow result=40
12:54:56 Set A/D channel type result=40
12:54:56 Set A/D encoding result=40
12:54:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:54:56 Set channel filter=0.000000e+000  result=40
12:54:56 Config A/D  Result=40
12:54:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:54:56 Get A/D filter: -9.255963e+061  result=40
12:54:56 Get A/D value=-858993460  result=40
12:54:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:54:56 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:54:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:54:56 Aux=
12:54:56 Message to Camera, serial 194252 queued
12:55:33 Received message from Master: op=PointingHead serial=194265
12:55:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:55:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:55:33 Point started: ret=0
12:55:33 point_skyscan result=0
12:55:34 Check angles
12:55:34 SkyScan query
12:55:35 SkyScan query done: ret=0  az=153.075<-10205  ze=6.51<-11566  Statuses=0009 0008
12:55:35 Msec=0  True Az=153.075  Ze=6.51  Az status=0009  Ze status=0008
12:55:35 Check angles
12:55:35 SkyScan query
12:55:35 SkyScan query done: ret=0  az=135.27<-9018  ze=6.495<-11567  Statuses=0009 0008
12:55:35 Msec=750  True Az=135.27  Ze=6.495  Az status=0009  Ze status=0008
12:55:36 Check angles
12:55:36 SkyScan query
12:55:36 SkyScan query done: ret=0  az=117.765<-7851  ze=6.495<-11567  Statuses=0009 0008
12:55:36 Msec=1500  True Az=117.765  Ze=6.495  Az status=0009  Ze status=0008
12:55:36 Check angles
12:55:36 SkyScan query
12:55:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:55:37 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:55:37 Message to Master queued w/err=0: serial=194265 error=0
12:55:42 Received message from Master: op=Filter serial=194266
12:55:42 Color wheel filter change from 0 to 0
12:55:42 FLIGetFilterPos err=0  currentPosition=0
12:55:42 FLIGetStepsRemaining err=0  RemainingSteps=0
12:55:42 Filter is already there-color wheel unchanged
12:55:42 Received message from Master: op=Shutter serial=194267
12:55:42 Shutter LASER close
12:55:42 Received message from Camera: op=State serial=194269
12:55:42 GetSingleValue result=40  Value=cccccccc
12:55:42 SkyScan query
12:55:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:55:43 Parameters OK
12:55:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:55:43 Set A/D data flow result=40
12:55:43 Set A/D channel type result=40
12:55:43 Set A/D encoding result=40
12:55:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:55:43 Set channel filter=0.000000e+000  result=40
12:55:43 Config A/D  Result=40
12:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:55:43 Get A/D filter: -9.255963e+061  result=40
12:55:43 Get A/D value=-858993460  result=40
12:55:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:55:43 Parameters OK
12:55:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:55:43 Set A/D data flow result=40
12:55:43 Set A/D channel type result=40
12:55:43 Set A/D encoding result=40
12:55:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:55:43 Set channel filter=0.000000e+000  result=40
12:55:43 Config A/D  Result=40
12:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:55:43 Get A/D filter: -9.255963e+061  result=40
12:55:43 Get A/D value=-858993460  result=40
12:55:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:55:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:55:43 Aux=
12:55:43 Message to Camera, serial 194269 queued
12:56:19 Received message from Master: op=PointingHead serial=194282
12:56:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:56:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:56:20 Point started: ret=0
12:56:20 point_skyscan result=0
12:56:21 Check angles
12:56:21 SkyScan query
12:56:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
12:56:21 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
12:56:21 Check angles
12:56:21 SkyScan query
12:56:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.73<-14982  Statuses=0008 0009
12:56:22 Msec=750  True Az=112.995  Ze=-44.73  Az status=0008  Ze status=0009
12:56:22 Check angles
12:56:22 SkyScan query
12:56:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.685<-16379  Statuses=0008 0009
12:56:23 Msec=1500  True Az=112.995  Ze=-65.685  Az status=0008  Ze status=0009
12:56:23 Check angles
12:56:23 SkyScan query
12:56:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.625<-17775  Statuses=0008 0009
12:56:23 Msec=2250  True Az=112.995  Ze=-86.625  Az status=0008  Ze status=0009
12:56:24 Check angles
12:56:24 SkyScan query
12:56:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.58<-19172  Statuses=0008 0009
12:56:24 Msec=3000  True Az=112.995  Ze=-107.58  Az status=0008  Ze status=0009
12:56:24 Check angles
12:56:24 SkyScan query
12:56:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.52<-20568  Statuses=0008 0009
12:56:25 Msec=3750  True Az=112.995  Ze=-128.52  Az status=0008  Ze status=0009
12:56:25 Check angles
12:56:25 SkyScan query
12:56:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.49<-21966  Statuses=0008 0009
12:56:26 Msec=4500  True Az=112.995  Ze=-149.49  Az status=0008  Ze status=0009
12:56:26 Check angles
12:56:26 SkyScan query
12:56:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.43<-23362  Statuses=0008 0009
12:56:26 Msec=5250  True Az=112.995  Ze=-170.43  Az status=0008  Ze status=0009
12:56:27 Check angles
12:56:27 SkyScan query
12:56:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:56:27 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:56:27 Message to Master queued w/err=0: serial=194282 error=0
12:56:32 Received message from Master: op=Filter serial=194283
12:56:32 Color wheel filter change from 0 to 0
12:56:32 FLIGetFilterPos err=0  currentPosition=0
12:56:32 FLIGetStepsRemaining err=0  RemainingSteps=0
12:56:32 Filter is already there-color wheel unchanged
12:56:32 Received message from Master: op=Shutter serial=194284
12:56:32 Shutter LASER open
12:56:33 Received message from Camera: op=State serial=194286
12:56:33 GetSingleValue result=40  Value=cccccccc
12:56:33 SkyScan query
12:56:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:56:33 Parameters OK
12:56:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:56:33 Set A/D data flow result=40
12:56:33 Set A/D channel type result=40
12:56:33 Set A/D encoding result=40
12:56:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:56:33 Set channel filter=0.000000e+000  result=40
12:56:33 Config A/D  Result=40
12:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:56:33 Get A/D filter: -9.255963e+061  result=40
12:56:33 Get A/D value=-858993460  result=40
12:56:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:56:33 Parameters OK
12:56:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:56:33 Set A/D data flow result=40
12:56:33 Set A/D channel type result=40
12:56:33 Set A/D encoding result=40
12:56:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:56:33 Set channel filter=0.000000e+000  result=40
12:56:33 Config A/D  Result=40
12:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:56:33 Get A/D filter: -9.255963e+061  result=40
12:56:33 Get A/D value=-858993460  result=40
12:56:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:56:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:56:33 Aux=
12:56:33 Message to Camera, serial 194286 queued
12:56:41 Received message from Master: op=Shutter serial=194295
12:56:41 Shutter LASER close
12:56:41 Received message from Master: op=PointingHead serial=194299
12:56:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:56:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:56:41 Point started: ret=0
12:56:41 point_skyscan result=0
12:56:42 Check angles
12:56:42 SkyScan query
12:56:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.01<-21534  Statuses=0008 0009
12:56:43 Msec=0  True Az=112.995  Ze=-143.01  Az status=0008  Ze status=0009
12:56:43 Check angles
12:56:43 SkyScan query
12:56:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.605<-20107  Statuses=0008 0009
12:56:43 Msec=750  True Az=112.995  Ze=-121.605  Az status=0008  Ze status=0009
12:56:44 Check angles
12:56:44 SkyScan query
12:56:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.665<-18711  Statuses=0008 0009
12:56:44 Msec=1500  True Az=112.995  Ze=-100.665  Az status=0008  Ze status=0009
12:56:44 Check angles
12:56:44 SkyScan query
12:56:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.26<-17284  Statuses=0008 0009
12:56:45 Msec=2250  True Az=112.995  Ze=-79.26  Az status=0008  Ze status=0009
12:56:45 Check angles
12:56:45 SkyScan query
12:56:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-57.87<-15858  Statuses=0008 0009
12:56:46 Msec=3000  True Az=112.995  Ze=-57.87  Az status=0008  Ze status=0009
12:56:46 Check angles
12:56:46 SkyScan query
12:56:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.465<-14431  Statuses=0008 0009
12:56:47 Msec=3750  True Az=112.995  Ze=-36.465  Az status=0008  Ze status=0009
12:56:47 Check angles
12:56:47 SkyScan query
12:56:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.51<-13034  Statuses=0008 0009
12:56:47 Msec=4500  True Az=112.995  Ze=-15.51  Az status=0008  Ze status=0009
12:56:47 Check angles
12:56:47 SkyScan query
12:56:48 SkyScan query done: ret=0  az=112.995<-7533  ze=5.1<-11660  Statuses=0008 0009
12:56:48 Msec=5250  True Az=112.995  Ze=5.1  Az status=0008  Ze status=0009
12:56:48 Check angles
12:56:48 SkyScan query
12:56:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
12:56:49 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
12:56:49 Message to Master queued w/err=0: serial=194299 error=0
12:56:54 Received message from Master: op=Filter serial=194300
12:56:54 Color wheel filter change from 0 to 0
12:56:54 FLIGetFilterPos err=0  currentPosition=0
12:56:54 FLIGetStepsRemaining err=0  RemainingSteps=0
12:56:54 Filter is already there-color wheel unchanged
12:56:54 Received message from Master: op=Shutter serial=194301
12:56:54 Shutter LASER close
12:56:54 Received message from Camera: op=State serial=194303
12:56:54 GetSingleValue result=40  Value=cccccccc
12:56:54 SkyScan query
12:56:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:56:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:56:55 Parameters OK
12:56:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:56:55 Set A/D data flow result=40
12:56:55 Set A/D channel type result=40
12:56:55 Set A/D encoding result=40
12:56:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:56:55 Set channel filter=0.000000e+000  result=40
12:56:55 Config A/D  Result=40
12:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:56:55 Get A/D filter: -9.255963e+061  result=40
12:56:55 Get A/D value=-858993460  result=40
12:56:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:56:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:56:55 Parameters OK
12:56:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:56:55 Set A/D data flow result=40
12:56:55 Set A/D channel type result=40
12:56:55 Set A/D encoding result=40
12:56:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:56:55 Set channel filter=0.000000e+000  result=40
12:56:55 Config A/D  Result=40
12:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:56:55 Get A/D filter: -9.255963e+061  result=40
12:56:55 Get A/D value=-858993460  result=40
12:56:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:56:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:56:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:56:55 Aux=
12:56:55 Message to Camera, serial 194303 queued
12:57:31 Received message from Master: op=PointingHead serial=194316
12:57:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:57:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:57:32 Point started: ret=0
12:57:32 point_skyscan result=0
12:57:33 Check angles
12:57:33 SkyScan query
12:57:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:57:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:57:33 Message to Master queued w/err=0: serial=194316 error=0
12:57:38 Received message from Master: op=Filter serial=194317
12:57:38 Color wheel filter change from 0 to 0
12:57:38 FLIGetFilterPos err=0  currentPosition=0
12:57:38 FLIGetStepsRemaining err=0  RemainingSteps=0
12:57:38 Filter is already there-color wheel unchanged
12:57:38 Received message from Master: op=Shutter serial=194318
12:57:38 Shutter LASER close
12:57:38 Received message from Camera: op=State serial=194320
12:57:38 GetSingleValue result=40  Value=cccccccc
12:57:38 SkyScan query
12:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:57:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:57:39 Parameters OK
12:57:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:57:39 Set A/D data flow result=40
12:57:39 Set A/D channel type result=40
12:57:39 Set A/D encoding result=40
12:57:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:57:39 Set channel filter=0.000000e+000  result=40
12:57:39 Config A/D  Result=40
12:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:57:39 Get A/D filter: -9.255963e+061  result=40
12:57:39 Get A/D value=-858993460  result=40
12:57:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:57:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:57:39 Parameters OK
12:57:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:57:39 Set A/D data flow result=40
12:57:39 Set A/D channel type result=40
12:57:39 Set A/D encoding result=40
12:57:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:57:39 Set channel filter=0.000000e+000  result=40
12:57:39 Config A/D  Result=40
12:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:57:39 Get A/D filter: -9.255963e+061  result=40
12:57:39 Get A/D value=-858993460  result=40
12:57:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:57:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:57:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:57:39 Aux=
12:57:39 Message to Camera, serial 194320 queued
12:58:16 Received message from Master: op=PointingHead serial=194333
12:58:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:58:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:58:16 Point started: ret=0
12:58:16 point_skyscan result=0
12:58:17 Check angles
12:58:17 SkyScan query
12:58:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:58:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:58:17 Message to Master queued w/err=0: serial=194333 error=0
12:58:22 Received message from Master: op=Filter serial=194334
12:58:22 Color wheel filter change from 0 to 0
12:58:22 FLIGetFilterPos err=0  currentPosition=0
12:58:22 FLIGetStepsRemaining err=0  RemainingSteps=0
12:58:22 Filter is already there-color wheel unchanged
12:58:23 Received message from Master: op=Shutter serial=194335
12:58:23 Shutter LASER close
12:58:23 Received message from Camera: op=State serial=194337
12:58:23 GetSingleValue result=40  Value=cccccccc
12:58:23 SkyScan query
12:58:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:58:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:58:23 Parameters OK
12:58:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:58:23 Set A/D data flow result=40
12:58:23 Set A/D channel type result=40
12:58:23 Set A/D encoding result=40
12:58:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:58:23 Set channel filter=0.000000e+000  result=40
12:58:23 Config A/D  Result=40
12:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:58:23 Get A/D filter: -9.255963e+061  result=40
12:58:23 Get A/D value=-858993460  result=40
12:58:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:58:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:58:23 Parameters OK
12:58:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:58:23 Set A/D data flow result=40
12:58:23 Set A/D channel type result=40
12:58:23 Set A/D encoding result=40
12:58:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:58:23 Set channel filter=0.000000e+000  result=40
12:58:23 Config A/D  Result=40
12:58:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:58:23 Get A/D filter: -9.255963e+061  result=40
12:58:23 Get A/D value=-858993460  result=40
12:58:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:58:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:58:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:58:23 Aux=
12:58:23 Message to Camera, serial 194337 queued
12:59:00 Received message from Master: op=PointingHead serial=194350
12:59:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
12:59:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
12:59:00 Point started: ret=0
12:59:00 point_skyscan result=0
12:59:01 Check angles
12:59:01 SkyScan query
12:59:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:59:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
12:59:02 Message to Master queued w/err=0: serial=194350 error=0
12:59:07 Received message from Master: op=Filter serial=194351
12:59:07 Color wheel filter change from 0 to 0
12:59:07 FLIGetFilterPos err=0  currentPosition=0
12:59:07 FLIGetStepsRemaining err=0  RemainingSteps=0
12:59:07 Filter is already there-color wheel unchanged
12:59:07 Received message from Master: op=Shutter serial=194352
12:59:07 Shutter LASER close
12:59:07 Received message from Camera: op=State serial=194354
12:59:07 GetSingleValue result=40  Value=cccccccc
12:59:07 SkyScan query
12:59:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
12:59:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:59:07 Parameters OK
12:59:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:59:07 Set A/D data flow result=40
12:59:07 Set A/D channel type result=40
12:59:07 Set A/D encoding result=40
12:59:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:59:07 Set channel filter=0.000000e+000  result=40
12:59:07 Config A/D  Result=40
12:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:59:07 Get A/D filter: -9.255963e+061  result=40
12:59:07 Get A/D value=-858993460  result=40
12:59:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:59:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:59:07 Parameters OK
12:59:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:59:07 Set A/D data flow result=40
12:59:07 Set A/D channel type result=40
12:59:07 Set A/D encoding result=40
12:59:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:59:07 Set channel filter=0.000000e+000  result=40
12:59:07 Config A/D  Result=40
12:59:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:59:07 Get A/D filter: -9.255963e+061  result=40
12:59:07 Get A/D value=-858993460  result=40
12:59:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:59:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:59:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:59:07 Aux=
12:59:07 Message to Camera, serial 194354 queued
12:59:44 Received message from Master: op=PointingHead serial=194367
12:59:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
12:59:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
12:59:45 Point started: ret=0
12:59:45 point_skyscan result=0
12:59:45 Check angles
12:59:45 SkyScan query
12:59:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
12:59:46 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
12:59:46 Check angles
12:59:46 SkyScan query
12:59:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.355<-14957  Statuses=0008 0009
12:59:47 Msec=750  True Az=112.995  Ze=-44.355  Az status=0008  Ze status=0009
12:59:47 Check angles
12:59:47 SkyScan query
12:59:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
12:59:48 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
12:59:48 Check angles
12:59:48 SkyScan query
12:59:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.265<-17751  Statuses=0008 0009
12:59:48 Msec=2250  True Az=112.995  Ze=-86.265  Az status=0008  Ze status=0009
12:59:48 Check angles
12:59:48 SkyScan query
12:59:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.205<-19147  Statuses=0008 0009
12:59:49 Msec=3000  True Az=112.995  Ze=-107.205  Az status=0008  Ze status=0009
12:59:49 Check angles
12:59:49 SkyScan query
12:59:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.16<-20544  Statuses=0008 0009
12:59:50 Msec=3750  True Az=112.995  Ze=-128.16  Az status=0008  Ze status=0009
12:59:50 Check angles
12:59:50 SkyScan query
12:59:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.13<-21942  Statuses=0008 0009
12:59:51 Msec=4500  True Az=112.995  Ze=-149.13  Az status=0008  Ze status=0009
12:59:51 Check angles
12:59:51 SkyScan query
12:59:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.055<-23337  Statuses=0008 0009
12:59:51 Msec=5250  True Az=112.995  Ze=-170.055  Az status=0008  Ze status=0009
12:59:51 Check angles
12:59:51 SkyScan query
12:59:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
12:59:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
12:59:52 Message to Master queued w/err=0: serial=194367 error=0
12:59:57 Received message from Master: op=Filter serial=194368
12:59:57 Color wheel filter change from 0 to 0
12:59:57 FLIGetFilterPos err=0  currentPosition=0
12:59:57 FLIGetStepsRemaining err=0  RemainingSteps=0
12:59:57 Filter is already there-color wheel unchanged
12:59:57 Received message from Master: op=Shutter serial=194369
12:59:57 Shutter LASER open
12:59:57 Received message from Camera: op=State serial=194371
12:59:57 GetSingleValue result=40  Value=cccccccc
12:59:57 SkyScan query
12:59:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
12:59:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:59:58 Parameters OK
12:59:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:59:58 Set A/D data flow result=40
12:59:58 Set A/D channel type result=40
12:59:58 Set A/D encoding result=40
12:59:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:59:58 Set channel filter=0.000000e+000  result=40
12:59:58 Config A/D  Result=40
12:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:59:58 Get A/D filter: -9.255963e+061  result=40
12:59:58 Get A/D value=-858993460  result=40
12:59:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:59:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
12:59:58 Parameters OK
12:59:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
12:59:58 Set A/D data flow result=40
12:59:58 Set A/D channel type result=40
12:59:58 Set A/D encoding result=40
12:59:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
12:59:58 Set channel filter=0.000000e+000  result=40
12:59:58 Config A/D  Result=40
12:59:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
12:59:58 Get A/D filter: -9.255963e+061  result=40
12:59:58 Get A/D value=-858993460  result=40
12:59:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
12:59:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
12:59:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
12:59:58 Aux=
12:59:58 Message to Camera, serial 194371 queued
13:00:06 Received message from Master: op=Shutter serial=194381
13:00:06 Shutter LASER close
13:00:07 Received message from Master: op=PointingHead serial=194385
13:00:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:00:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:00:07 Point started: ret=0
13:00:07 point_skyscan result=0
13:00:08 Check angles
13:00:08 SkyScan query
13:00:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.025<-21535  Statuses=0008 0009
13:00:09 Msec=0  True Az=112.995  Ze=-143.025  Az status=0008  Ze status=0009
13:00:09 Check angles
13:00:09 SkyScan query
13:00:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.055<-20137  Statuses=0008 0009
13:00:09 Msec=750  True Az=112.995  Ze=-122.055  Az status=0008  Ze status=0009
13:00:10 Check angles
13:00:10 SkyScan query
13:00:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
13:00:10 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
13:00:10 Check angles
13:00:10 SkyScan query
13:00:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.175<-17345  Statuses=0008 0009
13:00:11 Msec=2250  True Az=112.995  Ze=-80.175  Az status=0008  Ze status=0009
13:00:11 Check angles
13:00:11 SkyScan query
13:00:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.235<-15949  Statuses=0008 0009
13:00:12 Msec=3000  True Az=112.995  Ze=-59.235  Az status=0008  Ze status=0009
13:00:12 Check angles
13:00:12 SkyScan query
13:00:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.235<-14549  Statuses=0008 0009
13:00:12 Msec=3750  True Az=112.995  Ze=-38.235  Az status=0008  Ze status=0009
13:00:13 Check angles
13:00:13 SkyScan query
13:00:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.31<-13154  Statuses=0008 0009
13:00:13 Msec=4500  True Az=112.995  Ze=-17.31  Az status=0008  Ze status=0009
13:00:13 Check angles
13:00:13 SkyScan query
13:00:14 SkyScan query done: ret=0  az=112.995<-7533  ze=3.66<-11756  Statuses=0008 0009
13:00:14 Msec=5250  True Az=112.995  Ze=3.66  Az status=0008  Ze status=0009
13:00:14 Check angles
13:00:14 SkyScan query
13:00:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:00:15 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:00:15 Message to Master queued w/err=0: serial=194385 error=0
13:00:20 Received message from Master: op=Filter serial=194386
13:00:20 Color wheel filter change from 0 to 0
13:00:20 FLIGetFilterPos err=0  currentPosition=0
13:00:20 FLIGetStepsRemaining err=0  RemainingSteps=0
13:00:20 Filter is already there-color wheel unchanged
13:00:20 Received message from Master: op=Shutter serial=194387
13:00:20 Shutter LASER close
13:00:20 Received message from Camera: op=State serial=194389
13:00:20 GetSingleValue result=40  Value=cccccccc
13:00:20 SkyScan query
13:00:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:00:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:00:21 Parameters OK
13:00:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:00:21 Set A/D data flow result=40
13:00:21 Set A/D channel type result=40
13:00:21 Set A/D encoding result=40
13:00:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:00:21 Set channel filter=0.000000e+000  result=40
13:00:21 Config A/D  Result=40
13:00:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:00:21 Get A/D filter: -9.255963e+061  result=40
13:00:21 Get A/D value=-858993460  result=40
13:00:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:00:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:00:21 Parameters OK
13:00:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:00:21 Set A/D data flow result=40
13:00:21 Set A/D channel type result=40
13:00:21 Set A/D encoding result=40
13:00:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:00:21 Set channel filter=0.000000e+000  result=40
13:00:21 Config A/D  Result=40
13:00:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:00:21 Get A/D filter: -9.255963e+061  result=40
13:00:21 Get A/D value=-858993460  result=40
13:00:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:00:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:00:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:00:21 Aux=
13:00:21 Message to Camera, serial 194389 queued
13:00:57 Received message from Master: op=PointingHead serial=194402
13:00:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:00:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:00:58 Point started: ret=0
13:00:58 point_skyscan result=0
13:00:59 Check angles
13:00:59 SkyScan query
13:00:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:00:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:00:59 Message to Master queued w/err=0: serial=194402 error=0
13:01:04 Received message from Master: op=Filter serial=194403
13:01:04 Color wheel filter change from 0 to 0
13:01:04 FLIGetFilterPos err=0  currentPosition=0
13:01:04 FLIGetStepsRemaining err=0  RemainingSteps=0
13:01:04 Filter is already there-color wheel unchanged
13:01:04 Received message from Master: op=Shutter serial=194404
13:01:04 Shutter LASER close
13:01:04 Received message from Camera: op=State serial=194406
13:01:04 GetSingleValue result=40  Value=cccccccc
13:01:04 SkyScan query
13:01:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:01:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:01:05 Parameters OK
13:01:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:01:05 Set A/D data flow result=40
13:01:05 Set A/D channel type result=40
13:01:05 Set A/D encoding result=40
13:01:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:01:05 Set channel filter=0.000000e+000  result=40
13:01:05 Config A/D  Result=40
13:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:01:05 Get A/D filter: -9.255963e+061  result=40
13:01:05 Get A/D value=-858993460  result=40
13:01:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:01:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:01:05 Parameters OK
13:01:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:01:05 Set A/D data flow result=40
13:01:05 Set A/D channel type result=40
13:01:05 Set A/D encoding result=40
13:01:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:01:05 Set channel filter=0.000000e+000  result=40
13:01:05 Config A/D  Result=40
13:01:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:01:05 Get A/D filter: -9.255963e+061  result=40
13:01:05 Get A/D value=-858993460  result=40
13:01:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:01:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:01:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:01:05 Aux=
13:01:05 Message to Camera, serial 194406 queued
13:01:42 Received message from Master: op=PointingHead serial=194419
13:01:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:01:42 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:01:42 Point started: ret=0
13:01:42 point_skyscan result=0
13:01:43 Check angles
13:01:43 SkyScan query
13:01:43 SkyScan query done: ret=0  az=136.125<-9075  ze=-6.51<-12434  Statuses=0009 0008
13:01:43 Msec=0  True Az=136.125  Ze=-6.51  Az status=0009  Ze status=0008
13:01:44 Check angles
13:01:44 SkyScan query
13:01:44 SkyScan query done: ret=0  az=153.555<-10237  ze=-6.495<-12433  Statuses=0009 0008
13:01:44 Msec=750  True Az=153.555  Ze=-6.495  Az status=0009  Ze status=0008
13:01:44 Check angles
13:01:44 SkyScan query
13:01:45 SkyScan query done: ret=0  az=171.105<-11407  ze=-6.495<-12433  Statuses=0009 0008
13:01:45 Msec=1500  True Az=171.105  Ze=-6.495  Az status=0009  Ze status=0008
13:01:45 Check angles
13:01:45 SkyScan query
13:01:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:01:46 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:01:46 Message to Master queued w/err=0: serial=194419 error=0
13:01:51 Received message from Master: op=Filter serial=194420
13:01:51 Color wheel filter change from 0 to 0
13:01:51 FLIGetFilterPos err=0  currentPosition=0
13:01:51 FLIGetStepsRemaining err=0  RemainingSteps=0
13:01:51 Filter is already there-color wheel unchanged
13:01:51 Received message from Master: op=Shutter serial=194421
13:01:51 Shutter LASER close
13:01:51 Received message from Camera: op=State serial=194423
13:01:51 GetSingleValue result=40  Value=cccccccc
13:01:51 SkyScan query
13:01:52 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:01:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:01:52 Parameters OK
13:01:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:01:52 Set A/D data flow result=40
13:01:52 Set A/D channel type result=40
13:01:52 Set A/D encoding result=40
13:01:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:01:52 Set channel filter=0.000000e+000  result=40
13:01:52 Config A/D  Result=40
13:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:01:52 Get A/D filter: -9.255963e+061  result=40
13:01:52 Get A/D value=-858993460  result=40
13:01:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:01:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:01:52 Parameters OK
13:01:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:01:52 Set A/D data flow result=40
13:01:52 Set A/D channel type result=40
13:01:52 Set A/D encoding result=40
13:01:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:01:52 Set channel filter=0.000000e+000  result=40
13:01:52 Config A/D  Result=40
13:01:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:01:52 Get A/D filter: -9.255963e+061  result=40
13:01:52 Get A/D value=-858993460  result=40
13:01:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:01:52 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:01:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:01:52 Aux=
13:01:52 Message to Camera, serial 194423 queued
13:02:28 Received message from Master: op=PointingHead serial=194436
13:02:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:02:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:02:29 Point started: ret=0
13:02:29 point_skyscan result=0
13:02:29 Check angles
13:02:29 SkyScan query
13:02:30 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
13:02:30 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
13:02:30 Check angles
13:02:30 SkyScan query
13:02:31 SkyScan query done: ret=0  az=135.36<-9024  ze=6.495<-11567  Statuses=0009 0008
13:02:31 Msec=750  True Az=135.36  Ze=6.495  Az status=0009  Ze status=0008
13:02:31 Check angles
13:02:31 SkyScan query
13:02:32 SkyScan query done: ret=0  az=117.675<-7845  ze=6.495<-11567  Statuses=0009 0008
13:02:32 Msec=1500  True Az=117.675  Ze=6.495  Az status=0009  Ze status=0008
13:02:32 Check angles
13:02:32 SkyScan query
13:02:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:02:32 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:02:32 Message to Master queued w/err=0: serial=194436 error=0
13:02:37 Received message from Master: op=Filter serial=194437
13:02:37 Color wheel filter change from 0 to 0
13:02:37 FLIGetFilterPos err=0  currentPosition=0
13:02:37 FLIGetStepsRemaining err=0  RemainingSteps=0
13:02:37 Filter is already there-color wheel unchanged
13:02:37 Received message from Master: op=Shutter serial=194438
13:02:37 Shutter LASER close
13:02:37 Received message from Camera: op=State serial=194440
13:02:37 GetSingleValue result=40  Value=cccccccc
13:02:37 SkyScan query
13:02:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:02:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:02:38 Parameters OK
13:02:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:02:38 Set A/D data flow result=40
13:02:38 Set A/D channel type result=40
13:02:38 Set A/D encoding result=40
13:02:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:02:38 Set channel filter=0.000000e+000  result=40
13:02:38 Config A/D  Result=40
13:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:02:38 Get A/D filter: -9.255963e+061  result=40
13:02:38 Get A/D value=-858993460  result=40
13:02:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:02:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:02:38 Parameters OK
13:02:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:02:38 Set A/D data flow result=40
13:02:38 Set A/D channel type result=40
13:02:38 Set A/D encoding result=40
13:02:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:02:38 Set channel filter=0.000000e+000  result=40
13:02:38 Config A/D  Result=40
13:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:02:38 Get A/D filter: -9.255963e+061  result=40
13:02:38 Get A/D value=-858993460  result=40
13:02:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:02:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:02:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:02:38 Aux=
13:02:38 Message to Camera, serial 194440 queued
13:03:15 Received message from Master: op=PointingHead serial=194453
13:03:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:03:15 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:03:15 Point started: ret=0
13:03:15 point_skyscan result=0
13:03:16 Check angles
13:03:16 SkyScan query
13:03:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.88<-13592  Statuses=0008 0009
13:03:17 Msec=0  True Az=112.995  Ze=-23.88  Az status=0008  Ze status=0009
13:03:17 Check angles
13:03:17 SkyScan query
13:03:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.91<-14994  Statuses=0008 0009
13:03:17 Msec=750  True Az=112.995  Ze=-44.91  Az status=0008  Ze status=0009
13:03:18 Check angles
13:03:18 SkyScan query
13:03:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.76<-16384  Statuses=0008 0009
13:03:18 Msec=1500  True Az=112.995  Ze=-65.76  Az status=0008  Ze status=0009
13:03:18 Check angles
13:03:18 SkyScan query
13:03:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.715<-17781  Statuses=0008 0009
13:03:19 Msec=2250  True Az=112.995  Ze=-86.715  Az status=0008  Ze status=0009
13:03:19 Check angles
13:03:19 SkyScan query
13:03:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
13:03:20 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
13:03:20 Check angles
13:03:20 SkyScan query
13:03:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.61<-20574  Statuses=0008 0009
13:03:20 Msec=3750  True Az=112.995  Ze=-128.61  Az status=0008  Ze status=0009
13:03:21 Check angles
13:03:21 SkyScan query
13:03:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.58<-21972  Statuses=0008 0009
13:03:21 Msec=4500  True Az=112.995  Ze=-149.58  Az status=0008  Ze status=0009
13:03:21 Check angles
13:03:21 SkyScan query
13:03:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.505<-23367  Statuses=0008 0009
13:03:22 Msec=5250  True Az=112.995  Ze=-170.505  Az status=0008  Ze status=0009
13:03:22 Check angles
13:03:22 SkyScan query
13:03:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:03:23 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:03:23 Message to Master queued w/err=0: serial=194453 error=0
13:03:28 Received message from Master: op=Filter serial=194454
13:03:28 Color wheel filter change from 0 to 0
13:03:28 FLIGetFilterPos err=0  currentPosition=0
13:03:28 FLIGetStepsRemaining err=0  RemainingSteps=0
13:03:28 Filter is already there-color wheel unchanged
13:03:28 Received message from Master: op=Shutter serial=194455
13:03:28 Shutter LASER open
13:03:28 Received message from Camera: op=State serial=194457
13:03:28 GetSingleValue result=40  Value=cccccccc
13:03:28 SkyScan query
13:03:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:03:29 Parameters OK
13:03:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:03:29 Set A/D data flow result=40
13:03:29 Set A/D channel type result=40
13:03:29 Set A/D encoding result=40
13:03:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:03:29 Set channel filter=0.000000e+000  result=40
13:03:29 Config A/D  Result=40
13:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:03:29 Get A/D filter: -9.255963e+061  result=40
13:03:29 Get A/D value=-858993460  result=40
13:03:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:03:29 Parameters OK
13:03:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:03:29 Set A/D data flow result=40
13:03:29 Set A/D channel type result=40
13:03:29 Set A/D encoding result=40
13:03:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:03:29 Set channel filter=0.000000e+000  result=40
13:03:29 Config A/D  Result=40
13:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:03:29 Get A/D filter: -9.255963e+061  result=40
13:03:29 Get A/D value=-858993460  result=40
13:03:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:03:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:03:29 Aux=
13:03:29 Message to Camera, serial 194457 queued
13:03:36 Received message from Master: op=Identify serial=194466
13:03:37 Received message from Master: op=Shutter serial=194470
13:03:37 Shutter LASER close
13:03:37 Received message from Master: op=PointingHead serial=194474
13:03:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:03:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:03:38 Point started: ret=0
13:03:38 point_skyscan result=0
13:03:38 Check angles
13:03:38 SkyScan query
13:03:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
13:03:39 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
13:03:39 Check angles
13:03:39 SkyScan query
13:03:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.46<-20164  Statuses=0008 0009
13:03:40 Msec=750  True Az=112.995  Ze=-122.46  Az status=0008  Ze status=0009
13:03:40 Check angles
13:03:40 SkyScan query
13:03:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.49<-18766  Statuses=0008 0009
13:03:41 Msec=1500  True Az=112.995  Ze=-101.49  Az status=0008  Ze status=0009
13:03:41 Check angles
13:03:41 SkyScan query
13:03:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.52<-17368  Statuses=0008 0009
13:03:41 Msec=2250  True Az=112.995  Ze=-80.52  Az status=0008  Ze status=0009
13:03:41 Check angles
13:03:41 SkyScan query
13:03:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.595<-15973  Statuses=0008 0009
13:03:42 Msec=3000  True Az=112.995  Ze=-59.595  Az status=0008  Ze status=0009
13:03:42 Check angles
13:03:42 SkyScan query
13:03:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.61<-14574  Statuses=0008 0009
13:03:43 Msec=3750  True Az=112.995  Ze=-38.61  Az status=0008  Ze status=0009
13:03:43 Check angles
13:03:43 SkyScan query
13:03:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.685<-13179  Statuses=0008 0009
13:03:44 Msec=4500  True Az=112.995  Ze=-17.685  Az status=0008  Ze status=0009
13:03:44 Check angles
13:03:44 SkyScan query
13:03:44 SkyScan query done: ret=0  az=112.995<-7533  ze=3.285<-11781  Statuses=0008 0009
13:03:44 Msec=5250  True Az=112.995  Ze=3.285  Az status=0008  Ze status=0009
13:03:44 Check angles
13:03:44 SkyScan query
13:03:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:03:45 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:03:45 Message to Master queued w/err=0: serial=194474 error=0
[UTC 2019-3-9  13:03:48]
13:03:50 Received message from Master: op=Filter serial=194475
13:03:50 Color wheel filter change from 0 to 0
13:03:50 FLIGetFilterPos err=0  currentPosition=0
13:03:50 FLIGetStepsRemaining err=0  RemainingSteps=0
13:03:50 Filter is already there-color wheel unchanged
13:03:50 Received message from Master: op=Shutter serial=194476
13:03:50 Shutter LASER close
13:03:50 Received message from Camera: op=State serial=194478
13:03:50 GetSingleValue result=40  Value=cccccccc
13:03:50 SkyScan query
13:03:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:03:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:03:51 Parameters OK
13:03:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:03:51 Set A/D data flow result=40
13:03:51 Set A/D channel type result=40
13:03:51 Set A/D encoding result=40
13:03:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:03:51 Set channel filter=0.000000e+000  result=40
13:03:51 Config A/D  Result=40
13:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:03:51 Get A/D filter: -9.255963e+061  result=40
13:03:51 Get A/D value=-858993460  result=40
13:03:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:03:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:03:51 Parameters OK
13:03:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:03:51 Set A/D data flow result=40
13:03:51 Set A/D channel type result=40
13:03:51 Set A/D encoding result=40
13:03:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:03:51 Set channel filter=0.000000e+000  result=40
13:03:51 Config A/D  Result=40
13:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:03:51 Get A/D filter: -9.255963e+061  result=40
13:03:51 Get A/D value=-858993460  result=40
13:03:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:03:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:03:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:03:51 Aux=
13:03:51 Message to Camera, serial 194478 queued
13:04:27 Received message from Master: op=PointingHead serial=194490
13:04:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:04:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:04:27 Point started: ret=0
13:04:27 point_skyscan result=0
13:04:28 Check angles
13:04:28 SkyScan query
13:04:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:04:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:04:29 Message to Master queued w/err=0: serial=194490 error=0
13:04:34 Received message from Master: op=Filter serial=194491
13:04:34 Color wheel filter change from 0 to 0
13:04:34 FLIGetFilterPos err=0  currentPosition=0
13:04:34 FLIGetStepsRemaining err=0  RemainingSteps=0
13:04:34 Filter is already there-color wheel unchanged
13:04:34 Received message from Master: op=Shutter serial=194492
13:04:34 Shutter LASER close
13:04:34 Received message from Camera: op=State serial=194494
13:04:34 GetSingleValue result=40  Value=cccccccc
13:04:34 SkyScan query
13:04:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:04:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:04:34 Parameters OK
13:04:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:04:34 Set A/D data flow result=40
13:04:34 Set A/D channel type result=40
13:04:34 Set A/D encoding result=40
13:04:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:04:34 Set channel filter=0.000000e+000  result=40
13:04:34 Config A/D  Result=40
13:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:04:34 Get A/D filter: -9.255963e+061  result=40
13:04:34 Get A/D value=-858993460  result=40
13:04:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:04:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:04:34 Parameters OK
13:04:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:04:34 Set A/D data flow result=40
13:04:34 Set A/D channel type result=40
13:04:34 Set A/D encoding result=40
13:04:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:04:34 Set channel filter=0.000000e+000  result=40
13:04:34 Config A/D  Result=40
13:04:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:04:34 Get A/D filter: -9.255963e+061  result=40
13:04:34 Get A/D value=-858993460  result=40
13:04:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:04:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:04:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:04:34 Aux=
13:04:34 Message to Camera, serial 194494 queued
13:05:11 Received message from Master: op=PointingHead serial=194507
13:05:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:05:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:05:11 Point started: ret=0
13:05:11 point_skyscan result=0
13:05:12 Check angles
13:05:12 SkyScan query
13:05:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:05:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:05:13 Message to Master queued w/err=0: serial=194507 error=0
13:05:18 Received message from Master: op=Filter serial=194508
13:05:18 Color wheel filter change from 0 to 0
13:05:18 FLIGetFilterPos err=0  currentPosition=0
13:05:18 FLIGetStepsRemaining err=0  RemainingSteps=0
13:05:18 Filter is already there-color wheel unchanged
13:05:18 Received message from Master: op=Shutter serial=194509
13:05:18 Shutter LASER close
13:05:18 Received message from Camera: op=State serial=194511
13:05:18 GetSingleValue result=40  Value=cccccccc
13:05:18 SkyScan query
13:05:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:05:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:05:19 Parameters OK
13:05:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:05:19 Set A/D data flow result=40
13:05:19 Set A/D channel type result=40
13:05:19 Set A/D encoding result=40
13:05:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:05:19 Set channel filter=0.000000e+000  result=40
13:05:19 Config A/D  Result=40
13:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:05:19 Get A/D filter: -9.255963e+061  result=40
13:05:19 Get A/D value=-858993460  result=40
13:05:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:05:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:05:19 Parameters OK
13:05:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:05:19 Set A/D data flow result=40
13:05:19 Set A/D channel type result=40
13:05:19 Set A/D encoding result=40
13:05:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:05:19 Set channel filter=0.000000e+000  result=40
13:05:19 Config A/D  Result=40
13:05:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:05:19 Get A/D filter: -9.255963e+061  result=40
13:05:19 Get A/D value=-858993460  result=40
13:05:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:05:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:05:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:05:19 Aux=
13:05:19 Message to Camera, serial 194511 queued
13:05:55 Received message from Master: op=PointingHead serial=194524
13:05:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:05:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:05:56 Point started: ret=0
13:05:56 point_skyscan result=0
13:05:57 Check angles
13:05:57 SkyScan query
13:05:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:05:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:05:57 Message to Master queued w/err=0: serial=194524 error=0
13:06:02 Received message from Master: op=Filter serial=194525
13:06:02 Color wheel filter change from 0 to 0
13:06:02 FLIGetFilterPos err=0  currentPosition=0
13:06:02 FLIGetStepsRemaining err=0  RemainingSteps=0
13:06:02 Filter is already there-color wheel unchanged
13:06:02 Received message from Master: op=Shutter serial=194526
13:06:02 Shutter LASER close
13:06:02 Received message from Camera: op=State serial=194528
13:06:02 GetSingleValue result=40  Value=cccccccc
13:06:02 SkyScan query
13:06:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:06:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:06:03 Parameters OK
13:06:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:06:03 Set A/D data flow result=40
13:06:03 Set A/D channel type result=40
13:06:03 Set A/D encoding result=40
13:06:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:06:03 Set channel filter=0.000000e+000  result=40
13:06:03 Config A/D  Result=40
13:06:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:06:03 Get A/D filter: -9.255963e+061  result=40
13:06:03 Get A/D value=-858993460  result=40
13:06:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:06:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:06:03 Parameters OK
13:06:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:06:03 Set A/D data flow result=40
13:06:03 Set A/D channel type result=40
13:06:03 Set A/D encoding result=40
13:06:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:06:03 Set channel filter=0.000000e+000  result=40
13:06:03 Config A/D  Result=40
13:06:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:06:03 Get A/D filter: -9.255963e+061  result=40
13:06:03 Get A/D value=-858993460  result=40
13:06:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:06:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:06:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:06:03 Aux=
13:06:03 Message to Camera, serial 194528 queued
13:06:40 Received message from Master: op=PointingHead serial=194541
13:06:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:06:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:06:40 Point started: ret=0
13:06:40 point_skyscan result=0
13:06:41 Check angles
13:06:41 SkyScan query
13:06:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.565<-13571  Statuses=0008 0009
13:06:42 Msec=0  True Az=112.995  Ze=-23.565  Az status=0008  Ze status=0009
13:06:42 Check angles
13:06:42 SkyScan query
13:06:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.52<-14968  Statuses=0008 0009
13:06:42 Msec=750  True Az=112.995  Ze=-44.52  Az status=0008  Ze status=0009
13:06:42 Check angles
13:06:42 SkyScan query
13:06:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.475<-16365  Statuses=0008 0009
13:06:43 Msec=1500  True Az=112.995  Ze=-65.475  Az status=0008  Ze status=0009
13:06:43 Check angles
13:06:43 SkyScan query
13:06:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.43<-17762  Statuses=0008 0009
13:06:44 Msec=2250  True Az=112.995  Ze=-86.43  Az status=0008  Ze status=0009
13:06:44 Check angles
13:06:44 SkyScan query
13:06:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
13:06:45 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
13:06:45 Check angles
13:06:45 SkyScan query
13:06:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.745<-20583  Statuses=0008 0009
13:06:45 Msec=3750  True Az=112.995  Ze=-128.745  Az status=0008  Ze status=0009
13:06:45 Check angles
13:06:45 SkyScan query
13:06:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.7<-21980  Statuses=0008 0009
13:06:46 Msec=4500  True Az=112.995  Ze=-149.7  Az status=0008  Ze status=0009
13:06:46 Check angles
13:06:46 SkyScan query
13:06:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.625<-23375  Statuses=0008 0009
13:06:47 Msec=5250  True Az=112.995  Ze=-170.625  Az status=0008  Ze status=0009
13:06:47 Check angles
13:06:47 SkyScan query
13:06:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:06:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:06:48 Message to Master queued w/err=0: serial=194541 error=0
13:06:53 Received message from Master: op=Filter serial=194542
13:06:53 Color wheel filter change from 0 to 0
13:06:53 FLIGetFilterPos err=0  currentPosition=0
13:06:53 FLIGetStepsRemaining err=0  RemainingSteps=0
13:06:53 Filter is already there-color wheel unchanged
13:06:53 Received message from Master: op=Shutter serial=194543
13:06:53 Shutter LASER open
13:06:53 Received message from Camera: op=State serial=194545
13:06:53 GetSingleValue result=40  Value=cccccccc
13:06:53 SkyScan query
13:06:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:06:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:06:53 Parameters OK
13:06:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:06:53 Set A/D data flow result=40
13:06:53 Set A/D channel type result=40
13:06:53 Set A/D encoding result=40
13:06:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:06:53 Set channel filter=0.000000e+000  result=40
13:06:53 Config A/D  Result=40
13:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:06:53 Get A/D filter: -9.255963e+061  result=40
13:06:53 Get A/D value=-858993460  result=40
13:06:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:06:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:06:53 Parameters OK
13:06:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:06:53 Set A/D data flow result=40
13:06:53 Set A/D channel type result=40
13:06:53 Set A/D encoding result=40
13:06:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:06:53 Set channel filter=0.000000e+000  result=40
13:06:53 Config A/D  Result=40
13:06:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:06:53 Get A/D filter: -9.255963e+061  result=40
13:06:53 Get A/D value=-858993460  result=40
13:06:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:06:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:06:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:06:53 Aux=
13:06:53 Message to Camera, serial 194545 queued
13:07:02 Received message from Master: op=Shutter serial=194555
13:07:02 Shutter LASER close
13:07:02 Received message from Master: op=PointingHead serial=194559
13:07:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:07:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:07:03 Point started: ret=0
13:07:03 point_skyscan result=0
13:07:04 Check angles
13:07:04 SkyScan query
13:07:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
13:07:04 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
13:07:04 Check angles
13:07:04 SkyScan query
13:07:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.1<-20140  Statuses=0008 0009
13:07:05 Msec=750  True Az=112.995  Ze=-122.1  Az status=0008  Ze status=0009
13:07:05 Check angles
13:07:05 SkyScan query
13:07:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.16<-18744  Statuses=0008 0009
13:07:06 Msec=1500  True Az=112.995  Ze=-101.16  Az status=0008  Ze status=0009
13:07:06 Check angles
13:07:06 SkyScan query
13:07:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
13:07:06 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
13:07:07 Check angles
13:07:07 SkyScan query
13:07:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.845<-15923  Statuses=0008 0009
13:07:07 Msec=3000  True Az=112.995  Ze=-58.845  Az status=0008  Ze status=0009
13:07:07 Check angles
13:07:07 SkyScan query
13:07:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.86<-14524  Statuses=0008 0009
13:07:08 Msec=3750  True Az=112.995  Ze=-37.86  Az status=0008  Ze status=0009
13:07:08 Check angles
13:07:08 SkyScan query
13:07:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.905<-13127  Statuses=0008 0009
13:07:09 Msec=4500  True Az=112.995  Ze=-16.905  Az status=0008  Ze status=0009
13:07:09 Check angles
13:07:09 SkyScan query
13:07:09 SkyScan query done: ret=0  az=112.995<-7533  ze=4.395<-11707  Statuses=0008 0009
13:07:09 Msec=5250  True Az=112.995  Ze=4.395  Az status=0008  Ze status=0009
13:07:10 Check angles
13:07:10 SkyScan query
13:07:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:07:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:07:10 Message to Master queued w/err=0: serial=194559 error=0
13:07:15 Received message from Master: op=Filter serial=194560
13:07:15 Color wheel filter change from 0 to 0
13:07:15 FLIGetFilterPos err=0  currentPosition=0
13:07:15 FLIGetStepsRemaining err=0  RemainingSteps=0
13:07:15 Filter is already there-color wheel unchanged
13:07:15 Received message from Master: op=Shutter serial=194561
13:07:15 Shutter LASER close
13:07:16 Received message from Camera: op=State serial=194563
13:07:16 GetSingleValue result=40  Value=cccccccc
13:07:16 SkyScan query
13:07:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:07:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:07:16 Parameters OK
13:07:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:07:16 Set A/D data flow result=40
13:07:16 Set A/D channel type result=40
13:07:16 Set A/D encoding result=40
13:07:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:07:16 Set channel filter=0.000000e+000  result=40
13:07:16 Config A/D  Result=40
13:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:07:16 Get A/D filter: -9.255963e+061  result=40
13:07:16 Get A/D value=-858993460  result=40
13:07:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:07:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:07:16 Parameters OK
13:07:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:07:16 Set A/D data flow result=40
13:07:16 Set A/D channel type result=40
13:07:16 Set A/D encoding result=40
13:07:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:07:16 Set channel filter=0.000000e+000  result=40
13:07:16 Config A/D  Result=40
13:07:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:07:16 Get A/D filter: -9.255963e+061  result=40
13:07:16 Get A/D value=-858993460  result=40
13:07:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:07:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:07:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:07:16 Aux=
13:07:16 Message to Camera, serial 194563 queued
13:07:53 Received message from Master: op=PointingHead serial=194576
13:07:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:07:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:07:53 Point started: ret=0
13:07:53 point_skyscan result=0
13:07:54 Check angles
13:07:54 SkyScan query
13:07:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:07:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:07:55 Message to Master queued w/err=0: serial=194576 error=0
13:08:00 Received message from Master: op=Filter serial=194577
13:08:00 Color wheel filter change from 0 to 0
13:08:00 FLIGetFilterPos err=0  currentPosition=0
13:08:00 FLIGetStepsRemaining err=0  RemainingSteps=0
13:08:00 Filter is already there-color wheel unchanged
13:08:00 Received message from Master: op=Shutter serial=194578
13:08:00 Shutter LASER close
13:08:00 Received message from Camera: op=State serial=194580
13:08:00 GetSingleValue result=40  Value=cccccccc
13:08:00 SkyScan query
13:08:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:08:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:08:00 Parameters OK
13:08:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:08:00 Set A/D data flow result=40
13:08:00 Set A/D channel type result=40
13:08:00 Set A/D encoding result=40
13:08:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:08:00 Set channel filter=0.000000e+000  result=40
13:08:00 Config A/D  Result=40
13:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:08:00 Get A/D filter: -9.255963e+061  result=40
13:08:00 Get A/D value=-858993460  result=40
13:08:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:08:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:08:00 Parameters OK
13:08:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:08:00 Set A/D data flow result=40
13:08:00 Set A/D channel type result=40
13:08:00 Set A/D encoding result=40
13:08:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:08:00 Set channel filter=0.000000e+000  result=40
13:08:00 Config A/D  Result=40
13:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:08:00 Get A/D filter: -9.255963e+061  result=40
13:08:00 Get A/D value=-858993460  result=40
13:08:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:08:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:08:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:08:00 Aux=
13:08:00 Message to Camera, serial 194580 queued
13:08:37 Received message from Master: op=PointingHead serial=194593
13:08:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:08:37 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:08:38 Point started: ret=0
13:08:38 point_skyscan result=0
13:08:38 Check angles
13:08:38 SkyScan query
13:08:39 SkyScan query done: ret=0  az=136.155<-9077  ze=-6.51<-12434  Statuses=0009 0008
13:08:39 Msec=0  True Az=136.155  Ze=-6.51  Az status=0009  Ze status=0008
13:08:39 Check angles
13:08:39 SkyScan query
13:08:40 SkyScan query done: ret=0  az=153.6<-10240  ze=-6.495<-12433  Statuses=0009 0008
13:08:40 Msec=750  True Az=153.6  Ze=-6.495  Az status=0009  Ze status=0008
13:08:40 Check angles
13:08:40 SkyScan query
13:08:40 SkyScan query done: ret=0  az=171.12<-11408  ze=-6.495<-12433  Statuses=0009 0008
13:08:40 Msec=1500  True Az=171.12  Ze=-6.495  Az status=0009  Ze status=0008
13:08:41 Check angles
13:08:41 SkyScan query
13:08:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:08:41 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:08:41 Message to Master queued w/err=0: serial=194593 error=0
13:08:46 Received message from Master: op=Filter serial=194594
13:08:46 Color wheel filter change from 0 to 0
13:08:46 FLIGetFilterPos err=0  currentPosition=0
13:08:46 FLIGetStepsRemaining err=0  RemainingSteps=0
13:08:46 Filter is already there-color wheel unchanged
13:08:46 Received message from Master: op=Shutter serial=194595
13:08:46 Shutter LASER close
13:08:46 Received message from Camera: op=State serial=194597
13:08:46 GetSingleValue result=40  Value=cccccccc
13:08:46 SkyScan query
13:08:47 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:08:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:08:47 Parameters OK
13:08:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:08:47 Set A/D data flow result=40
13:08:47 Set A/D channel type result=40
13:08:47 Set A/D encoding result=40
13:08:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:08:47 Set channel filter=0.000000e+000  result=40
13:08:47 Config A/D  Result=40
13:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:08:47 Get A/D filter: -9.255963e+061  result=40
13:08:47 Get A/D value=-858993460  result=40
13:08:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:08:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:08:47 Parameters OK
13:08:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:08:47 Set A/D data flow result=40
13:08:47 Set A/D channel type result=40
13:08:47 Set A/D encoding result=40
13:08:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:08:47 Set channel filter=0.000000e+000  result=40
13:08:47 Config A/D  Result=40
13:08:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:08:47 Get A/D filter: -9.255963e+061  result=40
13:08:47 Get A/D value=-858993460  result=40
13:08:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:08:47 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:08:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:08:47 Aux=
13:08:47 Message to Camera, serial 194597 queued
13:09:24 Received message from Master: op=PointingHead serial=194610
13:09:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:09:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:09:24 Point started: ret=0
13:09:24 point_skyscan result=0
13:09:25 Check angles
13:09:25 SkyScan query
13:09:25 SkyScan query done: ret=0  az=152.865<-10191  ze=6.51<-11566  Statuses=0009 0008
13:09:25 Msec=0  True Az=152.865  Ze=6.51  Az status=0009  Ze status=0008
13:09:26 Check angles
13:09:26 SkyScan query
13:09:26 SkyScan query done: ret=0  az=135.12<-9008  ze=6.495<-11567  Statuses=0009 0008
13:09:26 Msec=750  True Az=135.12  Ze=6.495  Az status=0009  Ze status=0008
13:09:26 Check angles
13:09:26 SkyScan query
13:09:27 SkyScan query done: ret=0  az=117.315<-7821  ze=6.495<-11567  Statuses=0009 0008
13:09:27 Msec=1500  True Az=117.315  Ze=6.495  Az status=0009  Ze status=0008
13:09:27 Check angles
13:09:27 SkyScan query
13:09:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:09:28 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:09:28 Message to Master queued w/err=0: serial=194610 error=0
13:09:33 Received message from Master: op=Filter serial=194611
13:09:33 Color wheel filter change from 0 to 0
13:09:33 FLIGetFilterPos err=0  currentPosition=0
13:09:33 FLIGetStepsRemaining err=0  RemainingSteps=0
13:09:33 Filter is already there-color wheel unchanged
13:09:33 Received message from Master: op=Shutter serial=194612
13:09:33 Shutter LASER close
13:09:33 Received message from Camera: op=State serial=194614
13:09:33 GetSingleValue result=40  Value=cccccccc
13:09:33 SkyScan query
13:09:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:09:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:09:33 Parameters OK
13:09:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:09:33 Set A/D data flow result=40
13:09:33 Set A/D channel type result=40
13:09:33 Set A/D encoding result=40
13:09:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:09:33 Set channel filter=0.000000e+000  result=40
13:09:33 Config A/D  Result=40
13:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:09:33 Get A/D filter: -9.255963e+061  result=40
13:09:33 Get A/D value=-858993460  result=40
13:09:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:09:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:09:33 Parameters OK
13:09:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:09:33 Set A/D data flow result=40
13:09:33 Set A/D channel type result=40
13:09:33 Set A/D encoding result=40
13:09:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:09:33 Set channel filter=0.000000e+000  result=40
13:09:33 Config A/D  Result=40
13:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:09:33 Get A/D filter: -9.255963e+061  result=40
13:09:33 Get A/D value=-858993460  result=40
13:09:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:09:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:09:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:09:33 Aux=
13:09:33 Message to Camera, serial 194614 queued
13:10:10 Received message from Master: op=PointingHead serial=194627
13:10:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:10:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:10:11 Point started: ret=0
13:10:11 point_skyscan result=0
13:10:11 Check angles
13:10:11 SkyScan query
13:10:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.34<-13556  Statuses=0008 0009
13:10:12 Msec=0  True Az=112.995  Ze=-23.34  Az status=0008  Ze status=0009
13:10:12 Check angles
13:10:12 SkyScan query
13:10:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.325<-14955  Statuses=0008 0009
13:10:13 Msec=750  True Az=112.995  Ze=-44.325  Az status=0008  Ze status=0009
13:10:13 Check angles
13:10:13 SkyScan query
13:10:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.265<-16351  Statuses=0008 0009
13:10:14 Msec=1500  True Az=112.995  Ze=-65.265  Az status=0008  Ze status=0009
13:10:14 Check angles
13:10:14 SkyScan query
13:10:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.235<-17749  Statuses=0008 0009
13:10:14 Msec=2250  True Az=112.995  Ze=-86.235  Az status=0008  Ze status=0009
13:10:14 Check angles
13:10:14 SkyScan query
13:10:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.16<-19144  Statuses=0008 0009
13:10:15 Msec=3000  True Az=112.995  Ze=-107.16  Az status=0008  Ze status=0009
13:10:15 Check angles
13:10:15 SkyScan query
13:10:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.13<-20542  Statuses=0008 0009
13:10:16 Msec=3750  True Az=112.995  Ze=-128.13  Az status=0008  Ze status=0009
13:10:16 Check angles
13:10:16 SkyScan query
13:10:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.085<-21939  Statuses=0008 0009
13:10:17 Msec=4500  True Az=112.995  Ze=-149.085  Az status=0008  Ze status=0009
13:10:17 Check angles
13:10:17 SkyScan query
13:10:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.025<-23335  Statuses=0008 0009
13:10:17 Msec=5250  True Az=112.995  Ze=-170.025  Az status=0008  Ze status=0009
13:10:17 Check angles
13:10:17 SkyScan query
13:10:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:10:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:10:18 Message to Master queued w/err=0: serial=194627 error=0
13:10:23 Received message from Master: op=Filter serial=194628
13:10:23 Color wheel filter change from 0 to 0
13:10:23 FLIGetFilterPos err=0  currentPosition=0
13:10:23 FLIGetStepsRemaining err=0  RemainingSteps=0
13:10:23 Filter is already there-color wheel unchanged
13:10:23 Received message from Master: op=Shutter serial=194629
13:10:23 Shutter LASER open
13:10:23 Received message from Camera: op=State serial=194631
13:10:23 GetSingleValue result=40  Value=cccccccc
13:10:23 SkyScan query
13:10:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:10:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:10:24 Parameters OK
13:10:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:10:24 Set A/D data flow result=40
13:10:24 Set A/D channel type result=40
13:10:24 Set A/D encoding result=40
13:10:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:10:24 Set channel filter=0.000000e+000  result=40
13:10:24 Config A/D  Result=40
13:10:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:10:24 Get A/D filter: -9.255963e+061  result=40
13:10:24 Get A/D value=-858993460  result=40
13:10:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:10:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:10:24 Parameters OK
13:10:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:10:24 Set A/D data flow result=40
13:10:24 Set A/D channel type result=40
13:10:24 Set A/D encoding result=40
13:10:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:10:24 Set channel filter=0.000000e+000  result=40
13:10:24 Config A/D  Result=40
13:10:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:10:24 Get A/D filter: -9.255963e+061  result=40
13:10:24 Get A/D value=-858993460  result=40
13:10:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:10:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:10:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:10:24 Aux=
13:10:24 Message to Camera, serial 194631 queued
13:10:32 Received message from Master: op=Shutter serial=194641
13:10:32 Shutter LASER close
13:10:33 Received message from Master: op=PointingHead serial=194645
13:10:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:10:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:10:33 Point started: ret=0
13:10:33 point_skyscan result=0
13:10:34 Check angles
13:10:34 SkyScan query
13:10:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.8<-21520  Statuses=0008 0009
13:10:35 Msec=0  True Az=112.995  Ze=-142.8  Az status=0008  Ze status=0009
13:10:35 Check angles
13:10:35 SkyScan query
13:10:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.425<-20095  Statuses=0008 0009
13:10:35 Msec=750  True Az=112.995  Ze=-121.425  Az status=0008  Ze status=0009
13:10:36 Check angles
13:10:36 SkyScan query
13:10:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.455<-18697  Statuses=0008 0009
13:10:36 Msec=1500  True Az=112.995  Ze=-100.455  Az status=0008  Ze status=0009
13:10:36 Check angles
13:10:36 SkyScan query
13:10:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.485<-17299  Statuses=0008 0009
13:10:37 Msec=2250  True Az=112.995  Ze=-79.485  Az status=0008  Ze status=0009
13:10:37 Check angles
13:10:37 SkyScan query
13:10:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.08<-15872  Statuses=0008 0009
13:10:38 Msec=3000  True Az=112.995  Ze=-58.08  Az status=0008  Ze status=0009
13:10:38 Check angles
13:10:38 SkyScan query
13:10:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.705<-14447  Statuses=0008 0009
13:10:38 Msec=3750  True Az=112.995  Ze=-36.705  Az status=0008  Ze status=0009
13:10:39 Check angles
13:10:39 SkyScan query
13:10:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.735<-13049  Statuses=0008 0009
13:10:39 Msec=4500  True Az=112.995  Ze=-15.735  Az status=0008  Ze status=0009
13:10:39 Check angles
13:10:39 SkyScan query
13:10:40 SkyScan query done: ret=0  az=112.995<-7533  ze=4.935<-11671  Statuses=0008 0009
13:10:40 Msec=5250  True Az=112.995  Ze=4.935  Az status=0008  Ze status=0009
13:10:40 Check angles
13:10:40 SkyScan query
13:10:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:10:41 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:10:41 Message to Master queued w/err=0: serial=194645 error=0
13:10:46 Received message from Master: op=Filter serial=194646
13:10:46 Color wheel filter change from 0 to 0
13:10:46 FLIGetFilterPos err=0  currentPosition=0
13:10:46 FLIGetStepsRemaining err=0  RemainingSteps=0
13:10:46 Filter is already there-color wheel unchanged
13:10:46 Received message from Master: op=Shutter serial=194647
13:10:46 Shutter LASER close
13:10:46 Received message from Camera: op=State serial=194649
13:10:46 GetSingleValue result=40  Value=cccccccc
13:10:46 SkyScan query
13:10:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:10:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:10:47 Parameters OK
13:10:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:10:47 Set A/D data flow result=40
13:10:47 Set A/D channel type result=40
13:10:47 Set A/D encoding result=40
13:10:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:10:47 Set channel filter=0.000000e+000  result=40
13:10:47 Config A/D  Result=40
13:10:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:10:47 Get A/D filter: -9.255963e+061  result=40
13:10:47 Get A/D value=-858993460  result=40
13:10:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:10:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:10:47 Parameters OK
13:10:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:10:47 Set A/D data flow result=40
13:10:47 Set A/D channel type result=40
13:10:47 Set A/D encoding result=40
13:10:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:10:47 Set channel filter=0.000000e+000  result=40
13:10:47 Config A/D  Result=40
13:10:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:10:47 Get A/D filter: -9.255963e+061  result=40
13:10:47 Get A/D value=-858993460  result=40
13:10:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:10:47 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:10:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:10:47 Aux=
13:10:47 Message to Camera, serial 194649 queued
13:11:23 Received message from Master: op=PointingHead serial=194662
13:11:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:11:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:11:24 Point started: ret=0
13:11:24 point_skyscan result=0
13:11:25 Check angles
13:11:25 SkyScan query
13:11:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:11:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:11:25 Message to Master queued w/err=0: serial=194662 error=0
13:11:30 Received message from Master: op=Filter serial=194663
13:11:30 Color wheel filter change from 0 to 0
13:11:30 FLIGetFilterPos err=0  currentPosition=0
13:11:30 FLIGetStepsRemaining err=0  RemainingSteps=0
13:11:30 Filter is already there-color wheel unchanged
13:11:30 Received message from Master: op=Shutter serial=194664
13:11:30 Shutter LASER close
13:11:30 Received message from Camera: op=State serial=194666
13:11:30 GetSingleValue result=40  Value=cccccccc
13:11:30 SkyScan query
13:11:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:11:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:11:31 Parameters OK
13:11:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:11:31 Set A/D data flow result=40
13:11:31 Set A/D channel type result=40
13:11:31 Set A/D encoding result=40
13:11:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:11:31 Set channel filter=0.000000e+000  result=40
13:11:31 Config A/D  Result=40
13:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:11:31 Get A/D filter: -9.255963e+061  result=40
13:11:31 Get A/D value=-858993460  result=40
13:11:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:11:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:11:31 Parameters OK
13:11:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:11:31 Set A/D data flow result=40
13:11:31 Set A/D channel type result=40
13:11:31 Set A/D encoding result=40
13:11:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:11:31 Set channel filter=0.000000e+000  result=40
13:11:31 Config A/D  Result=40
13:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:11:31 Get A/D filter: -9.255963e+061  result=40
13:11:31 Get A/D value=-858993460  result=40
13:11:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:11:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:11:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:11:31 Aux=
13:11:31 Message to Camera, serial 194666 queued
13:12:08 Received message from Master: op=PointingHead serial=194679
13:12:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:12:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:12:08 Point started: ret=0
13:12:08 point_skyscan result=0
13:12:09 Check angles
13:12:09 SkyScan query
13:12:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:12:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:12:09 Message to Master queued w/err=0: serial=194679 error=0
13:12:14 Received message from Master: op=Filter serial=194680
13:12:14 Color wheel filter change from 0 to 0
13:12:14 FLIGetFilterPos err=0  currentPosition=0
13:12:14 FLIGetStepsRemaining err=0  RemainingSteps=0
13:12:14 Filter is already there-color wheel unchanged
13:12:15 Received message from Master: op=Shutter serial=194681
13:12:15 Shutter LASER close
13:12:15 Received message from Camera: op=State serial=194683
13:12:15 GetSingleValue result=40  Value=cccccccc
13:12:15 SkyScan query
13:12:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:12:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:12:15 Parameters OK
13:12:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:12:15 Set A/D data flow result=40
13:12:15 Set A/D channel type result=40
13:12:15 Set A/D encoding result=40
13:12:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:12:15 Set channel filter=0.000000e+000  result=40
13:12:15 Config A/D  Result=40
13:12:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:12:15 Get A/D filter: -9.255963e+061  result=40
13:12:15 Get A/D value=-858993460  result=40
13:12:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:12:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:12:15 Parameters OK
13:12:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:12:15 Set A/D data flow result=40
13:12:15 Set A/D channel type result=40
13:12:15 Set A/D encoding result=40
13:12:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:12:15 Set channel filter=0.000000e+000  result=40
13:12:15 Config A/D  Result=40
13:12:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:12:15 Get A/D filter: -9.255963e+061  result=40
13:12:15 Get A/D value=-858993460  result=40
13:12:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:12:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:12:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:12:15 Aux=
13:12:15 Message to Camera, serial 194683 queued
13:12:52 Received message from Master: op=PointingHead serial=194696
13:12:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:12:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:12:52 Point started: ret=0
13:12:52 point_skyscan result=0
13:12:53 Check angles
13:12:53 SkyScan query
13:12:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:12:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:12:54 Message to Master queued w/err=0: serial=194696 error=0
13:12:59 Received message from Master: op=Filter serial=194697
13:12:59 Color wheel filter change from 0 to 0
13:12:59 FLIGetFilterPos err=0  currentPosition=0
13:12:59 FLIGetStepsRemaining err=0  RemainingSteps=0
13:12:59 Filter is already there-color wheel unchanged
13:12:59 Received message from Master: op=Shutter serial=194698
13:12:59 Shutter LASER close
13:12:59 Received message from Camera: op=State serial=194700
13:12:59 GetSingleValue result=40  Value=cccccccc
13:12:59 SkyScan query
13:12:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:12:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:12:59 Parameters OK
13:12:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:12:59 Set A/D data flow result=40
13:12:59 Set A/D channel type result=40
13:12:59 Set A/D encoding result=40
13:12:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:12:59 Set channel filter=0.000000e+000  result=40
13:12:59 Config A/D  Result=40
13:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:12:59 Get A/D filter: -9.255963e+061  result=40
13:12:59 Get A/D value=-858993460  result=40
13:12:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:12:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:12:59 Parameters OK
13:12:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:12:59 Set A/D data flow result=40
13:12:59 Set A/D channel type result=40
13:12:59 Set A/D encoding result=40
13:12:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:12:59 Set channel filter=0.000000e+000  result=40
13:12:59 Config A/D  Result=40
13:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:12:59 Get A/D filter: -9.255963e+061  result=40
13:12:59 Get A/D value=-858993460  result=40
13:12:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:12:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:12:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:12:59 Aux=
13:12:59 Message to Camera, serial 194700 queued
13:13:36 Received message from Master: op=PointingHead serial=194713
13:13:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:13:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:13:37 Point started: ret=0
13:13:37 point_skyscan result=0
13:13:37 Check angles
13:13:37 SkyScan query
13:13:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.1<-13540  Statuses=0008 0009
13:13:38 Msec=0  True Az=112.995  Ze=-23.1  Az status=0008  Ze status=0009
13:13:38 Check angles
13:13:38 SkyScan query
13:13:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.07<-14938  Statuses=0008 0009
13:13:39 Msec=750  True Az=112.995  Ze=-44.07  Az status=0008  Ze status=0009
13:13:39 Check angles
13:13:39 SkyScan query
13:13:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.025<-16335  Statuses=0008 0009
13:13:40 Msec=1500  True Az=112.995  Ze=-65.025  Az status=0008  Ze status=0009
13:13:40 Check angles
13:13:40 SkyScan query
13:13:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.995<-17733  Statuses=0008 0009
13:13:40 Msec=2250  True Az=112.995  Ze=-85.995  Az status=0008  Ze status=0009
13:13:40 Check angles
13:13:40 SkyScan query
13:13:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.92<-19128  Statuses=0008 0009
13:13:41 Msec=3000  True Az=112.995  Ze=-106.92  Az status=0008  Ze status=0009
13:13:41 Check angles
13:13:41 SkyScan query
13:13:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.89<-20526  Statuses=0008 0009
13:13:42 Msec=3750  True Az=112.995  Ze=-127.89  Az status=0008  Ze status=0009
13:13:42 Check angles
13:13:42 SkyScan query
13:13:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.845<-21923  Statuses=0008 0009
13:13:43 Msec=4500  True Az=112.995  Ze=-148.845  Az status=0008  Ze status=0009
13:13:43 Check angles
13:13:43 SkyScan query
13:13:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.77<-23318  Statuses=0008 0009
13:13:43 Msec=5250  True Az=112.995  Ze=-169.77  Az status=0008  Ze status=0009
13:13:43 Check angles
13:13:43 SkyScan query
13:13:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:13:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:13:44 Message to Master queued w/err=0: serial=194713 error=0
13:13:49 Received message from Master: op=Filter serial=194714
13:13:49 Color wheel filter change from 0 to 0
13:13:49 FLIGetFilterPos err=0  currentPosition=0
13:13:49 FLIGetStepsRemaining err=0  RemainingSteps=0
13:13:49 Filter is already there-color wheel unchanged
13:13:49 Received message from Master: op=Shutter serial=194715
13:13:49 Shutter LASER open
13:13:49 Received message from Camera: op=State serial=194717
13:13:49 GetSingleValue result=40  Value=cccccccc
13:13:49 SkyScan query
13:13:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:13:50 Parameters OK
13:13:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:13:50 Set A/D data flow result=40
13:13:50 Set A/D channel type result=40
13:13:50 Set A/D encoding result=40
13:13:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:13:50 Set channel filter=0.000000e+000  result=40
13:13:50 Config A/D  Result=40
13:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:13:50 Get A/D filter: -9.255963e+061  result=40
13:13:50 Get A/D value=-858993460  result=40
13:13:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:13:50 Parameters OK
13:13:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:13:50 Set A/D data flow result=40
13:13:50 Set A/D channel type result=40
13:13:50 Set A/D encoding result=40
13:13:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:13:50 Set channel filter=0.000000e+000  result=40
13:13:50 Config A/D  Result=40
13:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:13:50 Get A/D filter: -9.255963e+061  result=40
13:13:50 Get A/D value=-858993460  result=40
13:13:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:13:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:13:50 Aux=
13:13:50 Message to Camera, serial 194717 queued
13:13:58 Received message from Master: op=Shutter serial=194727
13:13:58 Shutter LASER close
13:13:59 Received message from Master: op=PointingHead serial=194731
13:13:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:13:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:13:59 Point started: ret=0
13:13:59 point_skyscan result=0
13:14:00 Check angles
13:14:00 SkyScan query
13:14:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.46<-21564  Statuses=0008 0009
13:14:01 Msec=0  True Az=112.995  Ze=-143.46  Az status=0008  Ze status=0009
13:14:01 Check angles
13:14:01 SkyScan query
13:14:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.04<-20136  Statuses=0008 0009
13:14:01 Msec=750  True Az=112.995  Ze=-122.04  Az status=0008  Ze status=0009
13:14:02 Check angles
13:14:02 SkyScan query
13:14:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.665<-18711  Statuses=0008 0009
13:14:02 Msec=1500  True Az=112.995  Ze=-100.665  Az status=0008  Ze status=0009
13:14:02 Check angles
13:14:02 SkyScan query
13:14:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.71<-17314  Statuses=0008 0009
13:14:03 Msec=2250  True Az=112.995  Ze=-79.71  Az status=0008  Ze status=0009
13:14:03 Check angles
13:14:03 SkyScan query
13:14:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.305<-15887  Statuses=0008 0009
13:14:04 Msec=3000  True Az=112.995  Ze=-58.305  Az status=0008  Ze status=0009
13:14:04 Check angles
13:14:04 SkyScan query
13:14:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-36.93<-14462  Statuses=0008 0009
13:14:04 Msec=3750  True Az=112.995  Ze=-36.93  Az status=0008  Ze status=0009
13:14:05 Check angles
13:14:05 SkyScan query
13:14:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.525<-13035  Statuses=0008 0009
13:14:05 Msec=4500  True Az=112.995  Ze=-15.525  Az status=0008  Ze status=0009
13:14:05 Check angles
13:14:05 SkyScan query
13:14:06 SkyScan query done: ret=0  az=112.995<-7533  ze=5.1<-11660  Statuses=0008 0009
13:14:06 Msec=5250  True Az=112.995  Ze=5.1  Az status=0008  Ze status=0009
13:14:06 Check angles
13:14:06 SkyScan query
13:14:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:14:07 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:14:07 Message to Master queued w/err=0: serial=194731 error=0
13:14:12 Received message from Master: op=Filter serial=194732
13:14:12 Color wheel filter change from 0 to 0
13:14:12 FLIGetFilterPos err=0  currentPosition=0
13:14:12 FLIGetStepsRemaining err=0  RemainingSteps=0
13:14:12 Filter is already there-color wheel unchanged
13:14:12 Received message from Master: op=Shutter serial=194733
13:14:12 Shutter LASER close
13:14:12 Received message from Camera: op=State serial=194735
13:14:12 GetSingleValue result=40  Value=cccccccc
13:14:12 SkyScan query
13:14:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
[UTC 2019-3-9  13:14:13]
13:14:13 Parameters OK
13:14:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:14:13 Set A/D data flow result=40
13:14:13 Set A/D channel type result=40
13:14:13 Set A/D encoding result=40
13:14:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:14:13 Set channel filter=0.000000e+000  result=40
13:14:13 Config A/D  Result=40
13:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:14:13 Get A/D filter: -9.255963e+061  result=40
13:14:13 Get A/D value=-858993460  result=40
13:14:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:14:13 Parameters OK
13:14:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:14:13 Set A/D data flow result=40
13:14:13 Set A/D channel type result=40
13:14:13 Set A/D encoding result=40
13:14:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:14:13 Set channel filter=0.000000e+000  result=40
13:14:13 Config A/D  Result=40
13:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:14:13 Get A/D filter: -9.255963e+061  result=40
13:14:13 Get A/D value=-858993460  result=40
13:14:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:14:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:14:13 Aux=
13:14:13 Message to Camera, serial 194735 queued
13:14:50 Received message from Master: op=PointingHead serial=194748
13:14:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:14:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:14:50 Point started: ret=0
13:14:50 point_skyscan result=0
13:14:51 Check angles
13:14:51 SkyScan query
13:14:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:14:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:14:51 Message to Master queued w/err=0: serial=194748 error=0
13:14:56 Received message from Master: op=Filter serial=194749
13:14:56 Color wheel filter change from 0 to 0
13:14:56 FLIGetFilterPos err=0  currentPosition=0
13:14:56 FLIGetStepsRemaining err=0  RemainingSteps=0
13:14:56 Filter is already there-color wheel unchanged
13:14:56 Received message from Master: op=Shutter serial=194750
13:14:56 Shutter LASER close
13:14:56 Received message from Camera: op=State serial=194752
13:14:56 GetSingleValue result=40  Value=cccccccc
13:14:56 SkyScan query
13:14:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:14:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:14:57 Parameters OK
13:14:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:14:57 Set A/D data flow result=40
13:14:57 Set A/D channel type result=40
13:14:57 Set A/D encoding result=40
13:14:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:14:57 Set channel filter=0.000000e+000  result=40
13:14:57 Config A/D  Result=40
13:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:14:57 Get A/D filter: -9.255963e+061  result=40
13:14:57 Get A/D value=-858993460  result=40
13:14:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:14:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:14:57 Parameters OK
13:14:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:14:57 Set A/D data flow result=40
13:14:57 Set A/D channel type result=40
13:14:57 Set A/D encoding result=40
13:14:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:14:57 Set channel filter=0.000000e+000  result=40
13:14:57 Config A/D  Result=40
13:14:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:14:57 Get A/D filter: -9.255963e+061  result=40
13:14:57 Get A/D value=-858993460  result=40
13:14:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:14:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:14:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:14:57 Aux=
13:14:57 Message to Camera, serial 194752 queued
13:15:33 Received message from Master: op=PointingHead serial=194764
13:15:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:15:33 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:15:33 Point started: ret=0
13:15:33 point_skyscan result=0
13:15:34 Check angles
13:15:34 SkyScan query
13:15:35 SkyScan query done: ret=0  az=135.915<-9061  ze=-6.51<-12434  Statuses=0009 0008
13:15:35 Msec=0  True Az=135.915  Ze=-6.51  Az status=0009  Ze status=0008
13:15:35 Check angles
13:15:35 SkyScan query
13:15:35 SkyScan query done: ret=0  az=153.3<-10220  ze=-6.495<-12433  Statuses=0009 0008
13:15:35 Msec=750  True Az=153.3  Ze=-6.495  Az status=0009  Ze status=0008
13:15:36 Check angles
13:15:36 SkyScan query
13:15:36 SkyScan query done: ret=0  az=170.745<-11383  ze=-6.495<-12433  Statuses=0009 0008
13:15:36 Msec=1500  True Az=170.745  Ze=-6.495  Az status=0009  Ze status=0008
13:15:36 Check angles
13:15:36 SkyScan query
13:15:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:15:37 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:15:37 Message to Master queued w/err=0: serial=194764 error=0
13:15:42 Received message from Master: op=Filter serial=194765
13:15:42 Color wheel filter change from 0 to 0
13:15:42 FLIGetFilterPos err=0  currentPosition=0
13:15:42 FLIGetStepsRemaining err=0  RemainingSteps=0
13:15:42 Filter is already there-color wheel unchanged
13:15:42 Received message from Master: op=Shutter serial=194766
13:15:42 Shutter LASER close
13:15:42 Received message from Camera: op=State serial=194768
13:15:42 GetSingleValue result=40  Value=cccccccc
13:15:42 SkyScan query
13:15:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:15:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:15:43 Parameters OK
13:15:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:15:43 Set A/D data flow result=40
13:15:43 Set A/D channel type result=40
13:15:43 Set A/D encoding result=40
13:15:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:15:43 Set channel filter=0.000000e+000  result=40
13:15:43 Config A/D  Result=40
13:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:15:43 Get A/D filter: -9.255963e+061  result=40
13:15:43 Get A/D value=-858993460  result=40
13:15:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:15:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:15:43 Parameters OK
13:15:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:15:43 Set A/D data flow result=40
13:15:43 Set A/D channel type result=40
13:15:43 Set A/D encoding result=40
13:15:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:15:43 Set channel filter=0.000000e+000  result=40
13:15:43 Config A/D  Result=40
13:15:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:15:43 Get A/D filter: -9.255963e+061  result=40
13:15:43 Get A/D value=-858993460  result=40
13:15:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:15:43 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:15:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:15:43 Aux=
13:15:43 Message to Camera, serial 194768 queued
13:16:19 Received message from Master: op=PointingHead serial=194781
13:16:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:16:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:16:20 Point started: ret=0
13:16:20 point_skyscan result=0
13:16:21 Check angles
13:16:21 SkyScan query
13:16:21 SkyScan query done: ret=0  az=153.225<-10215  ze=6.51<-11566  Statuses=0009 0008
13:16:21 Msec=0  True Az=153.225  Ze=6.51  Az status=0009  Ze status=0008
13:16:21 Check angles
13:16:21 SkyScan query
13:16:22 SkyScan query done: ret=0  az=135.33<-9022  ze=6.495<-11567  Statuses=0009 0008
13:16:22 Msec=750  True Az=135.33  Ze=6.495  Az status=0009  Ze status=0008
13:16:22 Check angles
13:16:22 SkyScan query
13:16:23 SkyScan query done: ret=0  az=117.51<-7834  ze=6.495<-11567  Statuses=0009 0008
13:16:23 Msec=1500  True Az=117.51  Ze=6.495  Az status=0009  Ze status=0008
13:16:23 Check angles
13:16:23 SkyScan query
13:16:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:16:23 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:16:23 Message to Master queued w/err=0: serial=194781 error=0
13:16:28 Received message from Master: op=Filter serial=194782
13:16:28 Color wheel filter change from 0 to 0
13:16:28 FLIGetFilterPos err=0  currentPosition=0
13:16:28 FLIGetStepsRemaining err=0  RemainingSteps=0
13:16:28 Filter is already there-color wheel unchanged
13:16:29 Received message from Master: op=Shutter serial=194783
13:16:29 Shutter LASER close
13:16:29 Received message from Camera: op=State serial=194785
13:16:29 GetSingleValue result=40  Value=cccccccc
13:16:29 SkyScan query
13:16:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:16:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:16:29 Parameters OK
13:16:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:16:29 Set A/D data flow result=40
13:16:29 Set A/D channel type result=40
13:16:29 Set A/D encoding result=40
13:16:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:16:29 Set channel filter=0.000000e+000  result=40
13:16:29 Config A/D  Result=40
13:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:16:29 Get A/D filter: -9.255963e+061  result=40
13:16:29 Get A/D value=-858993460  result=40
13:16:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:16:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:16:29 Parameters OK
13:16:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:16:29 Set A/D data flow result=40
13:16:29 Set A/D channel type result=40
13:16:29 Set A/D encoding result=40
13:16:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:16:29 Set channel filter=0.000000e+000  result=40
13:16:29 Config A/D  Result=40
13:16:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:16:29 Get A/D filter: -9.255963e+061  result=40
13:16:29 Get A/D value=-858993460  result=40
13:16:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:16:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:16:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:16:29 Aux=
13:16:29 Message to Camera, serial 194785 queued
13:17:06 Received message from Master: op=PointingHead serial=194798
13:17:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:17:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:17:06 Point started: ret=0
13:17:06 point_skyscan result=0
13:17:07 Check angles
13:17:07 SkyScan query
13:17:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.805<-13587  Statuses=0008 0009
13:17:08 Msec=0  True Az=112.995  Ze=-23.805  Az status=0008  Ze status=0009
13:17:08 Check angles
13:17:08 SkyScan query
13:17:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.165<-15011  Statuses=0008 0009
13:17:08 Msec=750  True Az=112.995  Ze=-45.165  Az status=0008  Ze status=0009
13:17:09 Check angles
13:17:09 SkyScan query
13:17:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.135<-16409  Statuses=0008 0009
13:17:09 Msec=1500  True Az=112.995  Ze=-66.135  Az status=0008  Ze status=0009
13:17:09 Check angles
13:17:09 SkyScan query
13:17:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.525<-17835  Statuses=0008 0009
13:17:10 Msec=2250  True Az=112.995  Ze=-87.525  Az status=0008  Ze status=0009
13:17:10 Check angles
13:17:10 SkyScan query
13:17:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.9<-19260  Statuses=0008 0009
13:17:11 Msec=3000  True Az=112.995  Ze=-108.9  Az status=0008  Ze status=0009
13:17:11 Check angles
13:17:11 SkyScan query
13:17:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-130.305<-20687  Statuses=0008 0009
13:17:12 Msec=3750  True Az=112.995  Ze=-130.305  Az status=0008  Ze status=0009
13:17:12 Check angles
13:17:12 SkyScan query
13:17:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.245<-22083  Statuses=0008 0009
13:17:12 Msec=4500  True Az=112.995  Ze=-151.245  Az status=0008  Ze status=0009
13:17:12 Check angles
13:17:12 SkyScan query
13:17:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.765<-23451  Statuses=0008 0009
13:17:13 Msec=5250  True Az=112.995  Ze=-171.765  Az status=0008  Ze status=0009
13:17:13 Check angles
13:17:13 SkyScan query
13:17:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:17:14 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:17:14 Message to Master queued w/err=0: serial=194798 error=0
13:17:19 Received message from Master: op=Filter serial=194799
13:17:19 Color wheel filter change from 0 to 0
13:17:19 FLIGetFilterPos err=0  currentPosition=0
13:17:19 FLIGetStepsRemaining err=0  RemainingSteps=0
13:17:19 Filter is already there-color wheel unchanged
13:17:19 Received message from Master: op=Shutter serial=194800
13:17:19 Shutter LASER open
13:17:19 Received message from Camera: op=State serial=194802
13:17:19 GetSingleValue result=40  Value=cccccccc
13:17:19 SkyScan query
13:17:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:17:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:17:20 Parameters OK
13:17:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:17:20 Set A/D data flow result=40
13:17:20 Set A/D channel type result=40
13:17:20 Set A/D encoding result=40
13:17:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:17:20 Set channel filter=0.000000e+000  result=40
13:17:20 Config A/D  Result=40
13:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:17:20 Get A/D filter: -9.255963e+061  result=40
13:17:20 Get A/D value=-858993460  result=40
13:17:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:17:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:17:20 Parameters OK
13:17:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:17:20 Set A/D data flow result=40
13:17:20 Set A/D channel type result=40
13:17:20 Set A/D encoding result=40
13:17:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:17:20 Set channel filter=0.000000e+000  result=40
13:17:20 Config A/D  Result=40
13:17:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:17:20 Get A/D filter: -9.255963e+061  result=40
13:17:20 Get A/D value=-858993460  result=40
13:17:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:17:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:17:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:17:20 Aux=
13:17:20 Message to Camera, serial 194802 queued
13:17:28 Received message from Master: op=Shutter serial=194812
13:17:28 Shutter LASER close
13:17:29 Received message from Master: op=PointingHead serial=194816
13:17:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:17:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:17:29 Point started: ret=0
13:17:29 point_skyscan result=0
13:17:30 Check angles
13:17:30 SkyScan query
13:17:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.475<-21565  Statuses=0008 0009
13:17:30 Msec=0  True Az=112.995  Ze=-143.475  Az status=0008  Ze status=0009
13:17:30 Check angles
13:17:30 SkyScan query
13:17:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.025<-20135  Statuses=0008 0009
13:17:31 Msec=750  True Az=112.995  Ze=-122.025  Az status=0008  Ze status=0009
13:17:31 Check angles
13:17:31 SkyScan query
13:17:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.13<-18742  Statuses=0008 0009
13:17:32 Msec=1500  True Az=112.995  Ze=-101.13  Az status=0008  Ze status=0009
13:17:32 Check angles
13:17:32 SkyScan query
13:17:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.19<-17346  Statuses=0008 0009
13:17:32 Msec=2250  True Az=112.995  Ze=-80.19  Az status=0008  Ze status=0009
13:17:33 Check angles
13:17:33 SkyScan query
13:17:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.785<-15919  Statuses=0008 0009
13:17:33 Msec=3000  True Az=112.995  Ze=-58.785  Az status=0008  Ze status=0009
13:17:33 Check angles
13:17:33 SkyScan query
13:17:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.41<-14494  Statuses=0008 0009
13:17:34 Msec=3750  True Az=112.995  Ze=-37.41  Az status=0008  Ze status=0009
13:17:34 Check angles
13:17:34 SkyScan query
13:17:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.425<-13095  Statuses=0008 0009
13:17:35 Msec=4500  True Az=112.995  Ze=-16.425  Az status=0008  Ze status=0009
13:17:35 Check angles
13:17:35 SkyScan query
13:17:36 SkyScan query done: ret=0  az=112.995<-7533  ze=4.425<-11705  Statuses=0008 0009
13:17:36 Msec=5250  True Az=112.995  Ze=4.425  Az status=0008  Ze status=0009
13:17:36 Check angles
13:17:36 SkyScan query
13:17:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:17:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:17:36 Message to Master queued w/err=0: serial=194816 error=0
13:17:41 Received message from Master: op=Filter serial=194817
13:17:41 Color wheel filter change from 0 to 0
13:17:41 FLIGetFilterPos err=0  currentPosition=0
13:17:41 FLIGetStepsRemaining err=0  RemainingSteps=0
13:17:41 Filter is already there-color wheel unchanged
13:17:41 Received message from Master: op=Shutter serial=194818
13:17:41 Shutter LASER close
13:17:42 Received message from Camera: op=State serial=194820
13:17:42 GetSingleValue result=40  Value=cccccccc
13:17:42 SkyScan query
13:17:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:17:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:17:42 Parameters OK
13:17:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:17:42 Set A/D data flow result=40
13:17:42 Set A/D channel type result=40
13:17:42 Set A/D encoding result=40
13:17:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:17:42 Set channel filter=0.000000e+000  result=40
13:17:42 Config A/D  Result=40
13:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:17:42 Get A/D filter: -9.255963e+061  result=40
13:17:42 Get A/D value=-858993460  result=40
13:17:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:17:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:17:42 Parameters OK
13:17:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:17:42 Set A/D data flow result=40
13:17:42 Set A/D channel type result=40
13:17:42 Set A/D encoding result=40
13:17:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:17:42 Set channel filter=0.000000e+000  result=40
13:17:42 Config A/D  Result=40
13:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:17:42 Get A/D filter: -9.255963e+061  result=40
13:17:42 Get A/D value=-858993460  result=40
13:17:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:17:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:17:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:17:42 Aux=
13:17:42 Message to Camera, serial 194820 queued
13:18:19 Received message from Master: op=PointingHead serial=194833
13:18:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:18:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:18:19 Point started: ret=0
13:18:19 point_skyscan result=0
13:18:20 Check angles
13:18:20 SkyScan query
13:18:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:18:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:18:21 Message to Master queued w/err=0: serial=194833 error=0
13:18:26 Received message from Master: op=Filter serial=194834
13:18:26 Color wheel filter change from 0 to 0
13:18:26 FLIGetFilterPos err=0  currentPosition=0
13:18:26 FLIGetStepsRemaining err=0  RemainingSteps=0
13:18:26 Filter is already there-color wheel unchanged
13:18:26 Received message from Master: op=Shutter serial=194835
13:18:26 Shutter LASER close
13:18:26 Received message from Camera: op=State serial=194837
13:18:26 GetSingleValue result=40  Value=cccccccc
13:18:26 SkyScan query
13:18:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:18:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:18:26 Parameters OK
13:18:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:18:26 Set A/D data flow result=40
13:18:26 Set A/D channel type result=40
13:18:26 Set A/D encoding result=40
13:18:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:18:26 Set channel filter=0.000000e+000  result=40
13:18:26 Config A/D  Result=40
13:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:18:26 Get A/D filter: -9.255963e+061  result=40
13:18:26 Get A/D value=-858993460  result=40
13:18:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:18:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:18:26 Parameters OK
13:18:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:18:26 Set A/D data flow result=40
13:18:26 Set A/D channel type result=40
13:18:26 Set A/D encoding result=40
13:18:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:18:26 Set channel filter=0.000000e+000  result=40
13:18:26 Config A/D  Result=40
13:18:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:18:26 Get A/D filter: -9.255963e+061  result=40
13:18:26 Get A/D value=-858993460  result=40
13:18:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:18:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:18:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:18:26 Aux=
13:18:26 Message to Camera, serial 194837 queued
13:19:03 Received message from Master: op=PointingHead serial=194850
13:19:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:19:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:19:04 Point started: ret=0
13:19:04 point_skyscan result=0
13:19:04 Check angles
13:19:04 SkyScan query
13:19:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:19:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:19:05 Message to Master queued w/err=0: serial=194850 error=0
13:19:10 Received message from Master: op=Filter serial=194851
13:19:10 Color wheel filter change from 0 to 0
13:19:10 FLIGetFilterPos err=0  currentPosition=0
13:19:10 FLIGetStepsRemaining err=0  RemainingSteps=0
13:19:10 Filter is already there-color wheel unchanged
13:19:10 Received message from Master: op=Shutter serial=194852
13:19:10 Shutter LASER close
13:19:10 Received message from Camera: op=State serial=194854
13:19:10 GetSingleValue result=40  Value=cccccccc
13:19:10 SkyScan query
13:19:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:19:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:19:11 Parameters OK
13:19:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:19:11 Set A/D data flow result=40
13:19:11 Set A/D channel type result=40
13:19:11 Set A/D encoding result=40
13:19:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:19:11 Set channel filter=0.000000e+000  result=40
13:19:11 Config A/D  Result=40
13:19:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:19:11 Get A/D filter: -9.255963e+061  result=40
13:19:11 Get A/D value=-858993460  result=40
13:19:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:19:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:19:11 Parameters OK
13:19:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:19:11 Set A/D data flow result=40
13:19:11 Set A/D channel type result=40
13:19:11 Set A/D encoding result=40
13:19:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:19:11 Set channel filter=0.000000e+000  result=40
13:19:11 Config A/D  Result=40
13:19:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:19:11 Get A/D filter: -9.255963e+061  result=40
13:19:11 Get A/D value=-858993460  result=40
13:19:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:19:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:19:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:19:11 Aux=
13:19:11 Message to Camera, serial 194854 queued
13:19:48 Received message from Master: op=PointingHead serial=194867
13:19:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:19:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:19:48 Point started: ret=0
13:19:48 point_skyscan result=0
13:19:49 Check angles
13:19:49 SkyScan query
13:19:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:19:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:19:49 Message to Master queued w/err=0: serial=194867 error=0
13:19:54 Received message from Master: op=Filter serial=194868
13:19:54 Color wheel filter change from 0 to 0
13:19:54 FLIGetFilterPos err=0  currentPosition=0
13:19:54 FLIGetStepsRemaining err=0  RemainingSteps=0
13:19:54 Filter is already there-color wheel unchanged
13:19:54 Received message from Master: op=Shutter serial=194869
13:19:54 Shutter LASER close
13:19:55 Received message from Camera: op=State serial=194871
13:19:55 GetSingleValue result=40  Value=cccccccc
13:19:55 SkyScan query
13:19:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:19:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:19:55 Parameters OK
13:19:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:19:55 Set A/D data flow result=40
13:19:55 Set A/D channel type result=40
13:19:55 Set A/D encoding result=40
13:19:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:19:55 Set channel filter=0.000000e+000  result=40
13:19:55 Config A/D  Result=40
13:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:19:55 Get A/D filter: -9.255963e+061  result=40
13:19:55 Get A/D value=-858993460  result=40
13:19:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:19:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:19:55 Parameters OK
13:19:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:19:55 Set A/D data flow result=40
13:19:55 Set A/D channel type result=40
13:19:55 Set A/D encoding result=40
13:19:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:19:55 Set channel filter=0.000000e+000  result=40
13:19:55 Config A/D  Result=40
13:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:19:55 Get A/D filter: -9.255963e+061  result=40
13:19:55 Get A/D value=-858993460  result=40
13:19:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:19:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:19:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:19:55 Aux=
13:19:55 Message to Camera, serial 194871 queued
13:20:31 Received message from Master: op=PointingHead serial=194883
13:20:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:20:31 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:20:31 Point started: ret=0
13:20:31 point_skyscan result=0
13:20:32 Check angles
13:20:32 SkyScan query
13:20:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.01<-13534  Statuses=0008 0009
13:20:33 Msec=0  True Az=112.995  Ze=-23.01  Az status=0008  Ze status=0009
13:20:33 Check angles
13:20:33 SkyScan query
13:20:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-43.98<-14932  Statuses=0008 0009
13:20:33 Msec=750  True Az=112.995  Ze=-43.98  Az status=0008  Ze status=0009
13:20:34 Check angles
13:20:34 SkyScan query
13:20:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.935<-16329  Statuses=0008 0009
13:20:34 Msec=1500  True Az=112.995  Ze=-64.935  Az status=0008  Ze status=0009
13:20:34 Check angles
13:20:34 SkyScan query
13:20:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.905<-17727  Statuses=0008 0009
13:20:35 Msec=2250  True Az=112.995  Ze=-85.905  Az status=0008  Ze status=0009
13:20:35 Check angles
13:20:35 SkyScan query
13:20:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.845<-19123  Statuses=0008 0009
13:20:36 Msec=3000  True Az=112.995  Ze=-106.845  Az status=0008  Ze status=0009
13:20:36 Check angles
13:20:36 SkyScan query
13:20:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.8<-20520  Statuses=0008 0009
13:20:36 Msec=3750  True Az=112.995  Ze=-127.8  Az status=0008  Ze status=0009
13:20:37 Check angles
13:20:37 SkyScan query
13:20:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.74<-21916  Statuses=0008 0009
13:20:37 Msec=4500  True Az=112.995  Ze=-148.74  Az status=0008  Ze status=0009
13:20:37 Check angles
13:20:37 SkyScan query
13:20:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.695<-23313  Statuses=0008 0009
13:20:38 Msec=5250  True Az=112.995  Ze=-169.695  Az status=0008  Ze status=0009
13:20:38 Check angles
13:20:38 SkyScan query
13:20:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:20:39 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:20:39 Message to Master queued w/err=0: serial=194883 error=0
13:20:44 Received message from Master: op=Filter serial=194884
13:20:44 Color wheel filter change from 0 to 0
13:20:44 FLIGetFilterPos err=0  currentPosition=0
13:20:44 FLIGetStepsRemaining err=0  RemainingSteps=0
13:20:44 Filter is already there-color wheel unchanged
13:20:44 Received message from Master: op=Shutter serial=194885
13:20:44 Shutter LASER open
13:20:44 Received message from Camera: op=State serial=194887
13:20:44 GetSingleValue result=40  Value=cccccccc
13:20:44 SkyScan query
13:20:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:20:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:20:45 Parameters OK
13:20:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:20:45 Set A/D data flow result=40
13:20:45 Set A/D channel type result=40
13:20:45 Set A/D encoding result=40
13:20:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:20:45 Set channel filter=0.000000e+000  result=40
13:20:45 Config A/D  Result=40
13:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:20:45 Get A/D filter: -9.255963e+061  result=40
13:20:45 Get A/D value=-858993460  result=40
13:20:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:20:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:20:45 Parameters OK
13:20:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:20:45 Set A/D data flow result=40
13:20:45 Set A/D channel type result=40
13:20:45 Set A/D encoding result=40
13:20:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:20:45 Set channel filter=0.000000e+000  result=40
13:20:45 Config A/D  Result=40
13:20:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:20:45 Get A/D filter: -9.255963e+061  result=40
13:20:45 Get A/D value=-858993460  result=40
13:20:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:20:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:20:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:20:45 Aux=
13:20:45 Message to Camera, serial 194887 queued
13:20:53 Received message from Master: op=Shutter serial=194897
13:20:53 Shutter LASER close
13:20:54 Received message from Master: op=PointingHead serial=194901
13:20:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:20:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:20:54 Point started: ret=0
13:20:54 point_skyscan result=0
13:20:55 Check angles
13:20:55 SkyScan query
13:20:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
13:20:55 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
13:20:56 Check angles
13:20:56 SkyScan query
13:20:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.43<-20162  Statuses=0008 0009
13:20:56 Msec=750  True Az=112.995  Ze=-122.43  Az status=0008  Ze status=0009
13:20:56 Check angles
13:20:56 SkyScan query
13:20:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.475<-18765  Statuses=0008 0009
13:20:57 Msec=1500  True Az=112.995  Ze=-101.475  Az status=0008  Ze status=0009
13:20:57 Check angles
13:20:57 SkyScan query
13:20:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.505<-17367  Statuses=0008 0009
13:20:58 Msec=2250  True Az=112.995  Ze=-80.505  Az status=0008  Ze status=0009
13:20:58 Check angles
13:20:58 SkyScan query
13:20:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.565<-15971  Statuses=0008 0009
13:20:58 Msec=3000  True Az=112.995  Ze=-59.565  Az status=0008  Ze status=0009
13:20:59 Check angles
13:20:59 SkyScan query
13:20:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.61<-14574  Statuses=0008 0009
13:20:59 Msec=3750  True Az=112.995  Ze=-38.61  Az status=0008  Ze status=0009
13:20:59 Check angles
13:20:59 SkyScan query
13:21:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.67<-13178  Statuses=0008 0009
13:21:00 Msec=4500  True Az=112.995  Ze=-17.67  Az status=0008  Ze status=0009
13:21:00 Check angles
13:21:00 SkyScan query
13:21:01 SkyScan query done: ret=0  az=112.995<-7533  ze=3.315<-11779  Statuses=0008 0009
13:21:01 Msec=5250  True Az=112.995  Ze=3.315  Az status=0008  Ze status=0009
13:21:01 Check angles
13:21:01 SkyScan query
13:21:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:21:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:21:01 Message to Master queued w/err=0: serial=194901 error=0
13:21:06 Received message from Master: op=Filter serial=194902
13:21:06 Color wheel filter change from 0 to 0
13:21:06 FLIGetFilterPos err=0  currentPosition=0
13:21:06 FLIGetStepsRemaining err=0  RemainingSteps=0
13:21:06 Filter is already there-color wheel unchanged
13:21:07 Received message from Master: op=Shutter serial=194903
13:21:07 Shutter LASER close
13:21:07 Received message from Camera: op=State serial=194905
13:21:07 GetSingleValue result=40  Value=cccccccc
13:21:07 SkyScan query
13:21:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:21:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:21:07 Parameters OK
13:21:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:21:07 Set A/D data flow result=40
13:21:07 Set A/D channel type result=40
13:21:07 Set A/D encoding result=40
13:21:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:21:07 Set channel filter=0.000000e+000  result=40
13:21:07 Config A/D  Result=40
13:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:21:07 Get A/D filter: -9.255963e+061  result=40
13:21:07 Get A/D value=-858993460  result=40
13:21:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:21:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:21:07 Parameters OK
13:21:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:21:07 Set A/D data flow result=40
13:21:07 Set A/D channel type result=40
13:21:07 Set A/D encoding result=40
13:21:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:21:07 Set channel filter=0.000000e+000  result=40
13:21:07 Config A/D  Result=40
13:21:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:21:07 Get A/D filter: -9.255963e+061  result=40
13:21:07 Get A/D value=-858993460  result=40
13:21:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:21:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:21:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:21:07 Aux=
13:21:07 Message to Camera, serial 194905 queued
13:21:44 Received message from Master: op=PointingHead serial=194918
13:21:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:21:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:21:44 Point started: ret=0
13:21:44 point_skyscan result=0
13:21:45 Check angles
13:21:45 SkyScan query
13:21:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:21:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:21:46 Message to Master queued w/err=0: serial=194918 error=0
13:21:51 Received message from Master: op=Filter serial=194919
13:21:51 Color wheel filter change from 0 to 0
13:21:51 FLIGetFilterPos err=0  currentPosition=0
13:21:51 FLIGetStepsRemaining err=0  RemainingSteps=0
13:21:51 Filter is already there-color wheel unchanged
13:21:51 Received message from Master: op=Shutter serial=194920
13:21:51 Shutter LASER close
13:21:51 Received message from Camera: op=State serial=194922
13:21:51 GetSingleValue result=40  Value=cccccccc
13:21:51 SkyScan query
13:21:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:21:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:21:52 Parameters OK
13:21:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:21:52 Set A/D data flow result=40
13:21:52 Set A/D channel type result=40
13:21:52 Set A/D encoding result=40
13:21:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:21:52 Set channel filter=0.000000e+000  result=40
13:21:52 Config A/D  Result=40
13:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:21:52 Get A/D filter: -9.255963e+061  result=40
13:21:52 Get A/D value=-858993460  result=40
13:21:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:21:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:21:52 Parameters OK
13:21:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:21:52 Set A/D data flow result=40
13:21:52 Set A/D channel type result=40
13:21:52 Set A/D encoding result=40
13:21:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:21:52 Set channel filter=0.000000e+000  result=40
13:21:52 Config A/D  Result=40
13:21:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:21:52 Get A/D filter: -9.255963e+061  result=40
13:21:52 Get A/D value=-858993460  result=40
13:21:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:21:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:21:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:21:52 Aux=
13:21:52 Message to Camera, serial 194922 queued
13:22:28 Received message from Master: op=PointingHead serial=194935
13:22:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:22:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:22:29 Point started: ret=0
13:22:29 point_skyscan result=0
13:22:29 Check angles
13:22:29 SkyScan query
13:22:30 SkyScan query done: ret=0  az=135.93<-9062  ze=-6.51<-12434  Statuses=0009 0008
13:22:30 Msec=0  True Az=135.93  Ze=-6.51  Az status=0009  Ze status=0008
13:22:30 Check angles
13:22:30 SkyScan query
13:22:31 SkyScan query done: ret=0  az=153.705<-10247  ze=-6.495<-12433  Statuses=0009 0008
13:22:31 Msec=750  True Az=153.705  Ze=-6.495  Az status=0009  Ze status=0008
13:22:31 Check angles
13:22:31 SkyScan query
13:22:32 SkyScan query done: ret=0  az=171.555<-11437  ze=-6.495<-12433  Statuses=0009 0008
13:22:32 Msec=1500  True Az=171.555  Ze=-6.495  Az status=0009  Ze status=0008
13:22:32 Check angles
13:22:32 SkyScan query
13:22:32 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:22:32 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:22:32 Message to Master queued w/err=0: serial=194935 error=0
13:22:37 Received message from Master: op=Filter serial=194936
13:22:37 Color wheel filter change from 0 to 0
13:22:37 FLIGetFilterPos err=0  currentPosition=0
13:22:37 FLIGetStepsRemaining err=0  RemainingSteps=0
13:22:37 Filter is already there-color wheel unchanged
13:22:38 Received message from Master: op=Shutter serial=194937
13:22:38 Shutter LASER close
13:22:38 Received message from Camera: op=State serial=194939
13:22:38 GetSingleValue result=40  Value=cccccccc
13:22:38 SkyScan query
13:22:38 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:22:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:22:38 Parameters OK
13:22:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:22:38 Set A/D data flow result=40
13:22:38 Set A/D channel type result=40
13:22:38 Set A/D encoding result=40
13:22:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:22:38 Set channel filter=0.000000e+000  result=40
13:22:38 Config A/D  Result=40
13:22:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:22:38 Get A/D filter: -9.255963e+061  result=40
13:22:38 Get A/D value=-858993460  result=40
13:22:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:22:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:22:38 Parameters OK
13:22:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:22:38 Set A/D data flow result=40
13:22:38 Set A/D channel type result=40
13:22:38 Set A/D encoding result=40
13:22:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:22:38 Set channel filter=0.000000e+000  result=40
13:22:38 Config A/D  Result=40
13:22:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:22:38 Get A/D filter: -9.255963e+061  result=40
13:22:38 Get A/D value=-858993460  result=40
13:22:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:22:38 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:22:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:22:38 Aux=
13:22:38 Message to Camera, serial 194939 queued
13:23:15 Received message from Master: op=PointingHead serial=194952
13:23:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:23:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:23:15 Point started: ret=0
13:23:15 point_skyscan result=0
13:23:16 Check angles
13:23:16 SkyScan query
13:23:17 SkyScan query done: ret=0  az=153.06<-10204  ze=6.51<-11566  Statuses=0009 0008
13:23:17 Msec=0  True Az=153.06  Ze=6.51  Az status=0009  Ze status=0008
13:23:17 Check angles
13:23:17 SkyScan query
13:23:17 SkyScan query done: ret=0  az=135.15<-9010  ze=6.495<-11567  Statuses=0009 0008
13:23:17 Msec=750  True Az=135.15  Ze=6.495  Az status=0009  Ze status=0008
13:23:18 Check angles
13:23:18 SkyScan query
13:23:18 SkyScan query done: ret=0  az=117.75<-7850  ze=6.495<-11567  Statuses=0009 0008
13:23:18 Msec=1500  True Az=117.75  Ze=6.495  Az status=0009  Ze status=0008
13:23:18 Check angles
13:23:18 SkyScan query
13:23:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:23:19 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:23:19 Message to Master queued w/err=0: serial=194952 error=0
13:23:24 Received message from Master: op=Filter serial=194953
13:23:24 Color wheel filter change from 0 to 0
13:23:24 FLIGetFilterPos err=0  currentPosition=0
13:23:24 FLIGetStepsRemaining err=0  RemainingSteps=0
13:23:24 Filter is already there-color wheel unchanged
13:23:24 Received message from Master: op=Shutter serial=194954
13:23:24 Shutter LASER close
13:23:24 Received message from Camera: op=State serial=194956
13:23:24 GetSingleValue result=40  Value=cccccccc
13:23:24 SkyScan query
13:23:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:23:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:23:25 Parameters OK
13:23:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:23:25 Set A/D data flow result=40
13:23:25 Set A/D channel type result=40
13:23:25 Set A/D encoding result=40
13:23:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:23:25 Set channel filter=0.000000e+000  result=40
13:23:25 Config A/D  Result=40
13:23:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:23:25 Get A/D filter: -9.255963e+061  result=40
13:23:25 Get A/D value=-858993460  result=40
13:23:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:23:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:23:25 Parameters OK
13:23:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:23:25 Set A/D data flow result=40
13:23:25 Set A/D channel type result=40
13:23:25 Set A/D encoding result=40
13:23:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:23:25 Set channel filter=0.000000e+000  result=40
13:23:25 Config A/D  Result=40
13:23:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:23:25 Get A/D filter: -9.255963e+061  result=40
13:23:25 Get A/D value=-858993460  result=40
13:23:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:23:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:23:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:23:25 Aux=
13:23:25 Message to Camera, serial 194956 queued
[UTC 2019-3-9  13:23:48]
13:24:02 Received message from Master: op=PointingHead serial=194969
13:24:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:24:02 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:24:02 Point started: ret=0
13:24:02 point_skyscan result=0
13:24:03 Check angles
13:24:03 SkyScan query
13:24:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
13:24:03 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
13:24:03 Check angles
13:24:03 SkyScan query
13:24:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.115<-14941  Statuses=0008 0009
13:24:04 Msec=750  True Az=112.995  Ze=-44.115  Az status=0008  Ze status=0009
13:24:04 Check angles
13:24:04 SkyScan query
13:24:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.055<-16337  Statuses=0008 0009
13:24:05 Msec=1500  True Az=112.995  Ze=-65.055  Az status=0008  Ze status=0009
13:24:05 Check angles
13:24:05 SkyScan query
13:24:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.025<-17735  Statuses=0008 0009
13:24:05 Msec=2250  True Az=112.995  Ze=-86.025  Az status=0008  Ze status=0009
13:24:06 Check angles
13:24:06 SkyScan query
13:24:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.965<-19131  Statuses=0008 0009
13:24:06 Msec=3000  True Az=112.995  Ze=-106.965  Az status=0008  Ze status=0009
13:24:06 Check angles
13:24:06 SkyScan query
13:24:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
13:24:07 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
13:24:07 Check angles
13:24:07 SkyScan query
13:24:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.875<-21925  Statuses=0008 0009
13:24:08 Msec=4500  True Az=112.995  Ze=-148.875  Az status=0008  Ze status=0009
13:24:08 Check angles
13:24:08 SkyScan query
13:24:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.8<-23320  Statuses=0008 0009
13:24:08 Msec=5250  True Az=112.995  Ze=-169.8  Az status=0008  Ze status=0009
13:24:09 Check angles
13:24:09 SkyScan query
13:24:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:24:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:24:09 Message to Master queued w/err=0: serial=194969 error=0
13:24:14 Received message from Master: op=Filter serial=194970
13:24:14 Color wheel filter change from 0 to 0
13:24:14 FLIGetFilterPos err=0  currentPosition=0
13:24:14 FLIGetStepsRemaining err=0  RemainingSteps=0
13:24:14 Filter is already there-color wheel unchanged
13:24:14 Received message from Master: op=Shutter serial=194971
13:24:14 Shutter LASER open
13:24:15 Received message from Camera: op=State serial=194973
13:24:15 GetSingleValue result=40  Value=cccccccc
13:24:15 SkyScan query
13:24:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:24:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:24:15 Parameters OK
13:24:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:24:15 Set A/D data flow result=40
13:24:15 Set A/D channel type result=40
13:24:15 Set A/D encoding result=40
13:24:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:24:15 Set channel filter=0.000000e+000  result=40
13:24:15 Config A/D  Result=40
13:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:24:15 Get A/D filter: -9.255963e+061  result=40
13:24:15 Get A/D value=-858993460  result=40
13:24:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:24:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:24:15 Parameters OK
13:24:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:24:15 Set A/D data flow result=40
13:24:15 Set A/D channel type result=40
13:24:15 Set A/D encoding result=40
13:24:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:24:15 Set channel filter=0.000000e+000  result=40
13:24:15 Config A/D  Result=40
13:24:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:24:15 Get A/D filter: -9.255963e+061  result=40
13:24:15 Get A/D value=-858993460  result=40
13:24:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:24:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:24:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:24:15 Aux=
13:24:15 Message to Camera, serial 194973 queued
13:24:24 Received message from Master: op=Shutter serial=194983
13:24:24 Shutter LASER close
13:24:24 Received message from Master: op=PointingHead serial=194987
13:24:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:24:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:24:24 Point started: ret=0
13:24:24 point_skyscan result=0
13:24:25 Check angles
13:24:25 SkyScan query
13:24:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.935<-21529  Statuses=0008 0009
13:24:26 Msec=0  True Az=112.995  Ze=-142.935  Az status=0008  Ze status=0009
13:24:26 Check angles
13:24:26 SkyScan query
13:24:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.04<-20136  Statuses=0008 0009
13:24:26 Msec=750  True Az=112.995  Ze=-122.04  Az status=0008  Ze status=0009
13:24:27 Check angles
13:24:27 SkyScan query
13:24:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.115<-18741  Statuses=0008 0009
13:24:27 Msec=1500  True Az=112.995  Ze=-101.115  Az status=0008  Ze status=0009
13:24:27 Check angles
13:24:27 SkyScan query
13:24:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.16<-17344  Statuses=0008 0009
13:24:28 Msec=2250  True Az=112.995  Ze=-80.16  Az status=0008  Ze status=0009
13:24:28 Check angles
13:24:28 SkyScan query
13:24:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.695<-15913  Statuses=0008 0009
13:24:29 Msec=3000  True Az=112.995  Ze=-58.695  Az status=0008  Ze status=0009
13:24:29 Check angles
13:24:29 SkyScan query
13:24:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.38<-14492  Statuses=0008 0009
13:24:29 Msec=3750  True Az=112.995  Ze=-37.38  Az status=0008  Ze status=0009
13:24:30 Check angles
13:24:30 SkyScan query
13:24:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.96<-13064  Statuses=0008 0009
13:24:30 Msec=4500  True Az=112.995  Ze=-15.96  Az status=0008  Ze status=0009
13:24:30 Check angles
13:24:30 SkyScan query
13:24:31 SkyScan query done: ret=0  az=112.995<-7533  ze=4.785<-11681  Statuses=0008 0009
13:24:31 Msec=5250  True Az=112.995  Ze=4.785  Az status=0008  Ze status=0009
13:24:31 Check angles
13:24:31 SkyScan query
13:24:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:24:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:24:32 Message to Master queued w/err=0: serial=194987 error=0
13:24:37 Received message from Master: op=Filter serial=194988
13:24:37 Color wheel filter change from 0 to 0
13:24:37 FLIGetFilterPos err=0  currentPosition=0
13:24:37 FLIGetStepsRemaining err=0  RemainingSteps=0
13:24:37 Filter is already there-color wheel unchanged
13:24:37 Received message from Master: op=Shutter serial=194989
13:24:37 Shutter LASER close
13:24:37 Received message from Camera: op=State serial=194991
13:24:37 GetSingleValue result=40  Value=cccccccc
13:24:37 SkyScan query
13:24:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:24:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:24:38 Parameters OK
13:24:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:24:38 Set A/D data flow result=40
13:24:38 Set A/D channel type result=40
13:24:38 Set A/D encoding result=40
13:24:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:24:38 Set channel filter=0.000000e+000  result=40
13:24:38 Config A/D  Result=40
13:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:24:38 Get A/D filter: -9.255963e+061  result=40
13:24:38 Get A/D value=-858993460  result=40
13:24:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:24:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:24:38 Parameters OK
13:24:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:24:38 Set A/D data flow result=40
13:24:38 Set A/D channel type result=40
13:24:38 Set A/D encoding result=40
13:24:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:24:38 Set channel filter=0.000000e+000  result=40
13:24:38 Config A/D  Result=40
13:24:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:24:38 Get A/D filter: -9.255963e+061  result=40
13:24:38 Get A/D value=-858993460  result=40
13:24:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:24:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:24:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:24:38 Aux=
13:24:38 Message to Camera, serial 194991 queued
13:25:15 Received message from Master: op=PointingHead serial=195004
13:25:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:25:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:25:15 Point started: ret=0
13:25:15 point_skyscan result=0
13:25:16 Check angles
13:25:16 SkyScan query
13:25:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:25:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:25:16 Message to Master queued w/err=0: serial=195004 error=0
13:25:21 Received message from Master: op=Filter serial=195005
13:25:21 Color wheel filter change from 0 to 0
13:25:21 FLIGetFilterPos err=0  currentPosition=0
13:25:21 FLIGetStepsRemaining err=0  RemainingSteps=0
13:25:21 Filter is already there-color wheel unchanged
13:25:21 Received message from Master: op=Shutter serial=195006
13:25:21 Shutter LASER close
13:25:21 Received message from Camera: op=State serial=195008
13:25:21 GetSingleValue result=40  Value=cccccccc
13:25:21 SkyScan query
13:25:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:25:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:25:22 Parameters OK
13:25:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:25:22 Set A/D data flow result=40
13:25:22 Set A/D channel type result=40
13:25:22 Set A/D encoding result=40
13:25:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:25:22 Set channel filter=0.000000e+000  result=40
13:25:22 Config A/D  Result=40
13:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:25:22 Get A/D filter: -9.255963e+061  result=40
13:25:22 Get A/D value=-858993460  result=40
13:25:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:25:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:25:22 Parameters OK
13:25:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:25:22 Set A/D data flow result=40
13:25:22 Set A/D channel type result=40
13:25:22 Set A/D encoding result=40
13:25:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:25:22 Set channel filter=0.000000e+000  result=40
13:25:22 Config A/D  Result=40
13:25:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:25:22 Get A/D filter: -9.255963e+061  result=40
13:25:22 Get A/D value=-858993460  result=40
13:25:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:25:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:25:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:25:22 Aux=
13:25:22 Message to Camera, serial 195008 queued
13:25:59 Received message from Master: op=PointingHead serial=195021
13:25:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:25:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:25:59 Point started: ret=0
13:25:59 point_skyscan result=0
13:26:00 Check angles
13:26:00 SkyScan query
13:26:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:26:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:26:00 Message to Master queued w/err=0: serial=195021 error=0
13:26:05 Received message from Master: op=Filter serial=195022
13:26:05 Color wheel filter change from 0 to 0
13:26:05 FLIGetFilterPos err=0  currentPosition=0
13:26:05 FLIGetStepsRemaining err=0  RemainingSteps=0
13:26:05 Filter is already there-color wheel unchanged
13:26:06 Received message from Master: op=Shutter serial=195023
13:26:06 Shutter LASER close
13:26:06 Received message from Camera: op=State serial=195025
13:26:06 GetSingleValue result=40  Value=cccccccc
13:26:06 SkyScan query
13:26:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:26:06 Parameters OK
13:26:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:26:06 Set A/D data flow result=40
13:26:06 Set A/D channel type result=40
13:26:06 Set A/D encoding result=40
13:26:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:26:06 Set channel filter=0.000000e+000  result=40
13:26:06 Config A/D  Result=40
13:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:26:06 Get A/D filter: -9.255963e+061  result=40
13:26:06 Get A/D value=-858993460  result=40
13:26:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:26:06 Parameters OK
13:26:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:26:06 Set A/D data flow result=40
13:26:06 Set A/D channel type result=40
13:26:06 Set A/D encoding result=40
13:26:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:26:06 Set channel filter=0.000000e+000  result=40
13:26:06 Config A/D  Result=40
13:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:26:06 Get A/D filter: -9.255963e+061  result=40
13:26:06 Get A/D value=-858993460  result=40
13:26:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:26:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:26:06 Aux=
13:26:06 Message to Camera, serial 195025 queued
13:26:43 Received message from Master: op=PointingHead serial=195038
13:26:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:26:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:26:43 Point started: ret=0
13:26:43 point_skyscan result=0
13:26:44 Check angles
13:26:44 SkyScan query
13:26:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:26:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:26:45 Message to Master queued w/err=0: serial=195038 error=0
13:26:50 Received message from Master: op=Filter serial=195039
13:26:50 Color wheel filter change from 0 to 0
13:26:50 FLIGetFilterPos err=0  currentPosition=0
13:26:50 FLIGetStepsRemaining err=0  RemainingSteps=0
13:26:50 Filter is already there-color wheel unchanged
13:26:50 Received message from Master: op=Shutter serial=195040
13:26:50 Shutter LASER close
13:26:50 Received message from Camera: op=State serial=195042
13:26:50 GetSingleValue result=40  Value=cccccccc
13:26:50 SkyScan query
13:26:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:26:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:26:51 Parameters OK
13:26:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:26:51 Set A/D data flow result=40
13:26:51 Set A/D channel type result=40
13:26:51 Set A/D encoding result=40
13:26:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:26:51 Set channel filter=0.000000e+000  result=40
13:26:51 Config A/D  Result=40
13:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:26:51 Get A/D filter: -9.255963e+061  result=40
13:26:51 Get A/D value=-858993460  result=40
13:26:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:26:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:26:51 Parameters OK
13:26:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:26:51 Set A/D data flow result=40
13:26:51 Set A/D channel type result=40
13:26:51 Set A/D encoding result=40
13:26:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:26:51 Set channel filter=0.000000e+000  result=40
13:26:51 Config A/D  Result=40
13:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:26:51 Get A/D filter: -9.255963e+061  result=40
13:26:51 Get A/D value=-858993460  result=40
13:26:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:26:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:26:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:26:51 Aux=
13:26:51 Message to Camera, serial 195042 queued
13:27:27 Received message from Master: op=PointingHead serial=195055
13:27:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:27:27 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:27:28 Point started: ret=0
13:27:28 point_skyscan result=0
13:27:28 Check angles
13:27:28 SkyScan query
13:27:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.115<-13541  Statuses=0008 0009
13:27:29 Msec=0  True Az=112.995  Ze=-23.115  Az status=0008  Ze status=0009
13:27:29 Check angles
13:27:29 SkyScan query
13:27:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.1<-14940  Statuses=0008 0009
13:27:30 Msec=750  True Az=112.995  Ze=-44.1  Az status=0008  Ze status=0009
13:27:30 Check angles
13:27:30 SkyScan query
13:27:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.055<-16337  Statuses=0008 0009
13:27:31 Msec=1500  True Az=112.995  Ze=-65.055  Az status=0008  Ze status=0009
13:27:31 Check angles
13:27:31 SkyScan query
13:27:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.01<-17734  Statuses=0008 0009
13:27:31 Msec=2250  True Az=112.995  Ze=-86.01  Az status=0008  Ze status=0009
13:27:31 Check angles
13:27:31 SkyScan query
13:27:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.965<-19131  Statuses=0008 0009
13:27:32 Msec=3000  True Az=112.995  Ze=-106.965  Az status=0008  Ze status=0009
13:27:32 Check angles
13:27:32 SkyScan query
13:27:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.935<-20529  Statuses=0008 0009
13:27:33 Msec=3750  True Az=112.995  Ze=-127.935  Az status=0008  Ze status=0009
13:27:33 Check angles
13:27:33 SkyScan query
13:27:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.875<-21925  Statuses=0008 0009
13:27:34 Msec=4500  True Az=112.995  Ze=-148.875  Az status=0008  Ze status=0009
13:27:34 Check angles
13:27:34 SkyScan query
13:27:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.815<-23321  Statuses=0008 0009
13:27:34 Msec=5250  True Az=112.995  Ze=-169.815  Az status=0008  Ze status=0009
13:27:34 Check angles
13:27:34 SkyScan query
13:27:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:27:35 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:27:35 Message to Master queued w/err=0: serial=195055 error=0
13:27:40 Received message from Master: op=Filter serial=195056
13:27:40 Color wheel filter change from 0 to 0
13:27:40 FLIGetFilterPos err=0  currentPosition=0
13:27:40 FLIGetStepsRemaining err=0  RemainingSteps=0
13:27:40 Filter is already there-color wheel unchanged
13:27:40 Received message from Master: op=Shutter serial=195057
13:27:40 Shutter LASER open
13:27:40 Received message from Camera: op=State serial=195059
13:27:40 GetSingleValue result=40  Value=cccccccc
13:27:40 SkyScan query
13:27:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:27:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:27:41 Parameters OK
13:27:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:27:41 Set A/D data flow result=40
13:27:41 Set A/D channel type result=40
13:27:41 Set A/D encoding result=40
13:27:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:27:41 Set channel filter=0.000000e+000  result=40
13:27:41 Config A/D  Result=40
13:27:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:27:41 Get A/D filter: -9.255963e+061  result=40
13:27:41 Get A/D value=-858993460  result=40
13:27:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:27:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:27:41 Parameters OK
13:27:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:27:41 Set A/D data flow result=40
13:27:41 Set A/D channel type result=40
13:27:41 Set A/D encoding result=40
13:27:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:27:41 Set channel filter=0.000000e+000  result=40
13:27:41 Config A/D  Result=40
13:27:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:27:41 Get A/D filter: -9.255963e+061  result=40
13:27:41 Get A/D value=-858993460  result=40
13:27:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:27:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:27:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:27:41 Aux=
13:27:41 Message to Camera, serial 195059 queued
13:27:49 Received message from Master: op=Shutter serial=195069
13:27:49 Shutter LASER close
13:27:50 Received message from Master: op=PointingHead serial=195073
13:27:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:27:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:27:50 Point started: ret=0
13:27:50 point_skyscan result=0
13:27:51 Check angles
13:27:51 SkyScan query
13:27:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.34<-21556  Statuses=0008 0009
13:27:52 Msec=0  True Az=112.995  Ze=-143.34  Az status=0008  Ze status=0009
13:27:52 Check angles
13:27:52 SkyScan query
13:27:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.385<-20159  Statuses=0008 0009
13:27:52 Msec=750  True Az=112.995  Ze=-122.385  Az status=0008  Ze status=0009
13:27:53 Check angles
13:27:53 SkyScan query
13:27:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.43<-18762  Statuses=0008 0009
13:27:53 Msec=1500  True Az=112.995  Ze=-101.43  Az status=0008  Ze status=0009
13:27:53 Check angles
13:27:53 SkyScan query
13:27:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.445<-17363  Statuses=0008 0009
13:27:54 Msec=2250  True Az=112.995  Ze=-80.445  Az status=0008  Ze status=0009
13:27:54 Check angles
13:27:54 SkyScan query
13:27:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.1<-15940  Statuses=0008 0009
13:27:55 Msec=3000  True Az=112.995  Ze=-59.1  Az status=0008  Ze status=0009
13:27:55 Check angles
13:27:55 SkyScan query
13:27:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.1<-14540  Statuses=0008 0009
13:27:55 Msec=3750  True Az=112.995  Ze=-38.1  Az status=0008  Ze status=0009
13:27:56 Check angles
13:27:56 SkyScan query
13:27:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.16<-13144  Statuses=0008 0009
13:27:56 Msec=4500  True Az=112.995  Ze=-17.16  Az status=0008  Ze status=0009
13:27:56 Check angles
13:27:56 SkyScan query
13:27:57 SkyScan query done: ret=0  az=112.995<-7533  ze=3.795<-11747  Statuses=0008 0009
13:27:57 Msec=5250  True Az=112.995  Ze=3.795  Az status=0008  Ze status=0009
13:27:57 Check angles
13:27:57 SkyScan query
13:27:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:27:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:27:58 Message to Master queued w/err=0: serial=195073 error=0
13:28:03 Received message from Master: op=Filter serial=195074
13:28:03 Color wheel filter change from 0 to 0
13:28:03 FLIGetFilterPos err=0  currentPosition=0
13:28:03 FLIGetStepsRemaining err=0  RemainingSteps=0
13:28:03 Filter is already there-color wheel unchanged
13:28:03 Received message from Master: op=Shutter serial=195075
13:28:03 Shutter LASER close
13:28:03 Received message from Camera: op=State serial=195077
13:28:03 GetSingleValue result=40  Value=cccccccc
13:28:03 SkyScan query
13:28:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:28:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:28:04 Parameters OK
13:28:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:28:04 Set A/D data flow result=40
13:28:04 Set A/D channel type result=40
13:28:04 Set A/D encoding result=40
13:28:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:28:04 Set channel filter=0.000000e+000  result=40
13:28:04 Config A/D  Result=40
13:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:28:04 Get A/D filter: -9.255963e+061  result=40
13:28:04 Get A/D value=-858993460  result=40
13:28:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:28:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:28:04 Parameters OK
13:28:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:28:04 Set A/D data flow result=40
13:28:04 Set A/D channel type result=40
13:28:04 Set A/D encoding result=40
13:28:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:28:04 Set channel filter=0.000000e+000  result=40
13:28:04 Config A/D  Result=40
13:28:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:28:04 Get A/D filter: -9.255963e+061  result=40
13:28:04 Get A/D value=-858993460  result=40
13:28:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:28:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:28:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:28:04 Aux=
13:28:04 Message to Camera, serial 195077 queued
13:28:40 Received message from Master: op=PointingHead serial=195090
13:28:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:28:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:28:41 Point started: ret=0
13:28:41 point_skyscan result=0
13:28:42 Check angles
13:28:42 SkyScan query
13:28:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:28:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:28:42 Message to Master queued w/err=0: serial=195090 error=0
13:28:47 Received message from Master: op=Filter serial=195091
13:28:47 Color wheel filter change from 0 to 0
13:28:47 FLIGetFilterPos err=0  currentPosition=0
13:28:47 FLIGetStepsRemaining err=0  RemainingSteps=0
13:28:47 Filter is already there-color wheel unchanged
13:28:47 Received message from Master: op=Shutter serial=195092
13:28:47 Shutter LASER close
13:28:47 Received message from Camera: op=State serial=195094
13:28:47 GetSingleValue result=40  Value=cccccccc
13:28:47 SkyScan query
13:28:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:28:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:28:48 Parameters OK
13:28:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:28:48 Set A/D data flow result=40
13:28:48 Set A/D channel type result=40
13:28:48 Set A/D encoding result=40
13:28:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:28:48 Set channel filter=0.000000e+000  result=40
13:28:48 Config A/D  Result=40
13:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:28:48 Get A/D filter: -9.255963e+061  result=40
13:28:48 Get A/D value=-858993460  result=40
13:28:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:28:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:28:48 Parameters OK
13:28:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:28:48 Set A/D data flow result=40
13:28:48 Set A/D channel type result=40
13:28:48 Set A/D encoding result=40
13:28:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:28:48 Set channel filter=0.000000e+000  result=40
13:28:48 Config A/D  Result=40
13:28:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:28:48 Get A/D filter: -9.255963e+061  result=40
13:28:48 Get A/D value=-858993460  result=40
13:28:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:28:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:28:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:28:48 Aux=
13:28:48 Message to Camera, serial 195094 queued
13:29:24 Received message from Master: op=PointingHead serial=195106
13:29:24 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:29:24 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:29:24 Point started: ret=0
13:29:24 point_skyscan result=0
13:29:25 Check angles
13:29:25 SkyScan query
13:29:25 SkyScan query done: ret=0  az=135.825<-9055  ze=-6.51<-12434  Statuses=0009 0008
13:29:25 Msec=0  True Az=135.825  Ze=-6.51  Az status=0009  Ze status=0008
13:29:26 Check angles
13:29:26 SkyScan query
13:29:26 SkyScan query done: ret=0  az=153.675<-10245  ze=-6.495<-12433  Statuses=0009 0008
13:29:26 Msec=750  True Az=153.675  Ze=-6.495  Az status=0009  Ze status=0008
13:29:26 Check angles
13:29:26 SkyScan query
13:29:27 SkyScan query done: ret=0  az=171.45<-11430  ze=-6.495<-12433  Statuses=0009 0008
13:29:27 Msec=1500  True Az=171.45  Ze=-6.495  Az status=0009  Ze status=0008
13:29:27 Check angles
13:29:27 SkyScan query
13:29:28 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:29:28 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:29:28 Message to Master queued w/err=0: serial=195106 error=0
13:29:33 Received message from Master: op=Filter serial=195107
13:29:33 Color wheel filter change from 0 to 0
13:29:33 FLIGetFilterPos err=0  currentPosition=0
13:29:33 FLIGetStepsRemaining err=0  RemainingSteps=0
13:29:33 Filter is already there-color wheel unchanged
13:29:33 Received message from Master: op=Shutter serial=195108
13:29:33 Shutter LASER close
13:29:33 Received message from Camera: op=State serial=195110
13:29:33 GetSingleValue result=40  Value=cccccccc
13:29:33 SkyScan query
13:29:34 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:29:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:29:34 Parameters OK
13:29:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:29:34 Set A/D data flow result=40
13:29:34 Set A/D channel type result=40
13:29:34 Set A/D encoding result=40
13:29:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:29:34 Set channel filter=0.000000e+000  result=40
13:29:34 Config A/D  Result=40
13:29:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:29:34 Get A/D filter: -9.255963e+061  result=40
13:29:34 Get A/D value=-858993460  result=40
13:29:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:29:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:29:34 Parameters OK
13:29:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:29:34 Set A/D data flow result=40
13:29:34 Set A/D channel type result=40
13:29:34 Set A/D encoding result=40
13:29:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:29:34 Set channel filter=0.000000e+000  result=40
13:29:34 Config A/D  Result=40
13:29:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:29:34 Get A/D filter: -9.255963e+061  result=40
13:29:34 Get A/D value=-858993460  result=40
13:29:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:29:34 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:29:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:29:34 Aux=
13:29:34 Message to Camera, serial 195110 queued
13:30:10 Received message from Master: op=PointingHead serial=195123
13:30:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:30:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:30:11 Point started: ret=0
13:30:11 point_skyscan result=0
13:30:11 Check angles
13:30:11 SkyScan query
13:30:12 SkyScan query done: ret=0  az=153.135<-10209  ze=6.51<-11566  Statuses=0009 0008
13:30:12 Msec=0  True Az=153.135  Ze=6.51  Az status=0009  Ze status=0008
13:30:12 Check angles
13:30:12 SkyScan query
13:30:13 SkyScan query done: ret=0  az=135.63<-9042  ze=6.495<-11567  Statuses=0009 0008
13:30:13 Msec=750  True Az=135.63  Ze=6.495  Az status=0009  Ze status=0008
13:30:13 Check angles
13:30:13 SkyScan query
13:30:14 SkyScan query done: ret=0  az=118.14<-7876  ze=6.495<-11567  Statuses=0009 0008
13:30:14 Msec=1500  True Az=118.14  Ze=6.495  Az status=0009  Ze status=0008
13:30:14 Check angles
13:30:14 SkyScan query
13:30:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:30:14 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:30:14 Message to Master queued w/err=0: serial=195123 error=0
13:30:19 Received message from Master: op=Filter serial=195124
13:30:19 Color wheel filter change from 0 to 0
13:30:19 FLIGetFilterPos err=0  currentPosition=0
13:30:19 FLIGetStepsRemaining err=0  RemainingSteps=0
13:30:19 Filter is already there-color wheel unchanged
13:30:19 Received message from Master: op=Shutter serial=195125
13:30:19 Shutter LASER close
13:30:20 Received message from Camera: op=State serial=195127
13:30:20 GetSingleValue result=40  Value=cccccccc
13:30:20 SkyScan query
13:30:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:30:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:30:20 Parameters OK
13:30:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:30:20 Set A/D data flow result=40
13:30:20 Set A/D channel type result=40
13:30:20 Set A/D encoding result=40
13:30:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:30:20 Set channel filter=0.000000e+000  result=40
13:30:20 Config A/D  Result=40
13:30:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:30:20 Get A/D filter: -9.255963e+061  result=40
13:30:20 Get A/D value=-858993460  result=40
13:30:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:30:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:30:20 Parameters OK
13:30:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:30:20 Set A/D data flow result=40
13:30:20 Set A/D channel type result=40
13:30:20 Set A/D encoding result=40
13:30:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:30:20 Set channel filter=0.000000e+000  result=40
13:30:20 Config A/D  Result=40
13:30:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:30:20 Get A/D filter: -9.255963e+061  result=40
13:30:20 Get A/D value=-858993460  result=40
13:30:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:30:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:30:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:30:20 Aux=
13:30:20 Message to Camera, serial 195127 queued
13:30:57 Received message from Master: op=PointingHead serial=195140
13:30:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:30:57 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:30:57 Point started: ret=0
13:30:57 point_skyscan result=0
13:30:58 Check angles
13:30:58 SkyScan query
13:30:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.37<-13558  Statuses=0008 0009
13:30:59 Msec=0  True Az=112.995  Ze=-23.37  Az status=0008  Ze status=0009
13:30:59 Check angles
13:30:59 SkyScan query
13:30:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.355<-14957  Statuses=0008 0009
13:30:59 Msec=750  True Az=112.995  Ze=-44.355  Az status=0008  Ze status=0009
13:31:00 Check angles
13:31:00 SkyScan query
13:31:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.295<-16353  Statuses=0008 0009
13:31:00 Msec=1500  True Az=112.995  Ze=-65.295  Az status=0008  Ze status=0009
13:31:00 Check angles
13:31:00 SkyScan query
13:31:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.25<-17750  Statuses=0008 0009
13:31:01 Msec=2250  True Az=112.995  Ze=-86.25  Az status=0008  Ze status=0009
13:31:01 Check angles
13:31:01 SkyScan query
13:31:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.625<-19175  Statuses=0008 0009
13:31:02 Msec=3000  True Az=112.995  Ze=-107.625  Az status=0008  Ze status=0009
13:31:02 Check angles
13:31:02 SkyScan query
13:31:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.565<-20571  Statuses=0008 0009
13:31:02 Msec=3750  True Az=112.995  Ze=-128.565  Az status=0008  Ze status=0009
13:31:03 Check angles
13:31:03 SkyScan query
13:31:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.55<-21970  Statuses=0008 0009
13:31:03 Msec=4500  True Az=112.995  Ze=-149.55  Az status=0008  Ze status=0009
13:31:03 Check angles
13:31:03 SkyScan query
13:31:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.835<-23389  Statuses=0008 0009
13:31:04 Msec=5250  True Az=112.995  Ze=-170.835  Az status=0008  Ze status=0009
13:31:04 Check angles
13:31:04 SkyScan query
13:31:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:31:05 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:31:05 Message to Master queued w/err=0: serial=195140 error=0
13:31:10 Received message from Master: op=Filter serial=195141
13:31:10 Color wheel filter change from 0 to 0
13:31:10 FLIGetFilterPos err=0  currentPosition=0
13:31:10 FLIGetStepsRemaining err=0  RemainingSteps=0
13:31:10 Filter is already there-color wheel unchanged
13:31:10 Received message from Master: op=Shutter serial=195142
13:31:10 Shutter LASER open
13:31:10 Received message from Camera: op=State serial=195144
13:31:10 GetSingleValue result=40  Value=cccccccc
13:31:10 SkyScan query
13:31:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:31:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:31:11 Parameters OK
13:31:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:31:11 Set A/D data flow result=40
13:31:11 Set A/D channel type result=40
13:31:11 Set A/D encoding result=40
13:31:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:31:11 Set channel filter=0.000000e+000  result=40
13:31:11 Config A/D  Result=40
13:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:31:11 Get A/D filter: -9.255963e+061  result=40
13:31:11 Get A/D value=-858993460  result=40
13:31:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:31:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:31:11 Parameters OK
13:31:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:31:11 Set A/D data flow result=40
13:31:11 Set A/D channel type result=40
13:31:11 Set A/D encoding result=40
13:31:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:31:11 Set channel filter=0.000000e+000  result=40
13:31:11 Config A/D  Result=40
13:31:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:31:11 Get A/D filter: -9.255963e+061  result=40
13:31:11 Get A/D value=-858993460  result=40
13:31:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:31:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:31:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:31:11 Aux=
13:31:11 Message to Camera, serial 195144 queued
13:31:19 Received message from Master: op=Shutter serial=195154
13:31:19 Shutter LASER close
13:31:19 Received message from Master: op=PointingHead serial=195158
13:31:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:31:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:31:20 Point started: ret=0
13:31:20 point_skyscan result=0
13:31:21 Check angles
13:31:21 SkyScan query
13:31:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
13:31:21 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
13:31:21 Check angles
13:31:21 SkyScan query
13:31:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.265<-20151  Statuses=0008 0009
13:31:22 Msec=750  True Az=112.995  Ze=-122.265  Az status=0008  Ze status=0009
13:31:22 Check angles
13:31:22 SkyScan query
13:31:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.31<-18754  Statuses=0008 0009
13:31:23 Msec=1500  True Az=112.995  Ze=-101.31  Az status=0008  Ze status=0009
13:31:23 Check angles
13:31:23 SkyScan query
13:31:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.34<-17356  Statuses=0008 0009
13:31:23 Msec=2250  True Az=112.995  Ze=-80.34  Az status=0008  Ze status=0009
13:31:24 Check angles
13:31:24 SkyScan query
13:31:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.98<-15932  Statuses=0008 0009
13:31:24 Msec=3000  True Az=112.995  Ze=-58.98  Az status=0008  Ze status=0009
13:31:24 Check angles
13:31:24 SkyScan query
13:31:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.995<-14533  Statuses=0008 0009
13:31:25 Msec=3750  True Az=112.995  Ze=-37.995  Az status=0008  Ze status=0009
13:31:25 Check angles
13:31:25 SkyScan query
13:31:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.055<-13137  Statuses=0008 0009
13:31:26 Msec=4500  True Az=112.995  Ze=-17.055  Az status=0008  Ze status=0009
13:31:26 Check angles
13:31:26 SkyScan query
13:31:26 SkyScan query done: ret=0  az=112.995<-7533  ze=3.9<-11740  Statuses=0008 0009
13:31:26 Msec=5250  True Az=112.995  Ze=3.9  Az status=0008  Ze status=0009
13:31:27 Check angles
13:31:27 SkyScan query
13:31:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:31:27 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:31:27 Message to Master queued w/err=0: serial=195158 error=0
13:31:32 Received message from Master: op=Filter serial=195159
13:31:32 Color wheel filter change from 0 to 0
13:31:32 FLIGetFilterPos err=0  currentPosition=0
13:31:32 FLIGetStepsRemaining err=0  RemainingSteps=0
13:31:32 Filter is already there-color wheel unchanged
13:31:32 Received message from Master: op=Shutter serial=195160
13:31:32 Shutter LASER close
13:31:32 Received message from Camera: op=State serial=195162
13:31:32 GetSingleValue result=40  Value=cccccccc
13:31:32 SkyScan query
13:31:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:31:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:31:33 Parameters OK
13:31:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:31:33 Set A/D data flow result=40
13:31:33 Set A/D channel type result=40
13:31:33 Set A/D encoding result=40
13:31:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:31:33 Set channel filter=0.000000e+000  result=40
13:31:33 Config A/D  Result=40
13:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:31:33 Get A/D filter: -9.255963e+061  result=40
13:31:33 Get A/D value=-858993460  result=40
13:31:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:31:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:31:33 Parameters OK
13:31:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:31:33 Set A/D data flow result=40
13:31:33 Set A/D channel type result=40
13:31:33 Set A/D encoding result=40
13:31:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:31:33 Set channel filter=0.000000e+000  result=40
13:31:33 Config A/D  Result=40
13:31:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:31:33 Get A/D filter: -9.255963e+061  result=40
13:31:33 Get A/D value=-858993460  result=40
13:31:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:31:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:31:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:31:33 Aux=
13:31:33 Message to Camera, serial 195162 queued
13:32:10 Received message from Master: op=PointingHead serial=195175
13:32:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:32:10 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:32:10 Point started: ret=0
13:32:10 point_skyscan result=0
13:32:11 Check angles
13:32:11 SkyScan query
13:32:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:32:12 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:32:12 Message to Master queued w/err=0: serial=195175 error=0
13:32:17 Received message from Master: op=Filter serial=195176
13:32:17 Color wheel filter change from 0 to 0
13:32:17 FLIGetFilterPos err=0  currentPosition=0
13:32:17 FLIGetStepsRemaining err=0  RemainingSteps=0
13:32:17 Filter is already there-color wheel unchanged
13:32:17 Received message from Master: op=Shutter serial=195177
13:32:17 Shutter LASER close
13:32:17 Received message from Camera: op=State serial=195179
13:32:17 GetSingleValue result=40  Value=cccccccc
13:32:17 SkyScan query
13:32:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:32:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:32:17 Parameters OK
13:32:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:32:17 Set A/D data flow result=40
13:32:17 Set A/D channel type result=40
13:32:17 Set A/D encoding result=40
13:32:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:32:17 Set channel filter=0.000000e+000  result=40
13:32:17 Config A/D  Result=40
13:32:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:32:17 Get A/D filter: -9.255963e+061  result=40
13:32:17 Get A/D value=-858993460  result=40
13:32:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:32:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:32:17 Parameters OK
13:32:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:32:17 Set A/D data flow result=40
13:32:17 Set A/D channel type result=40
13:32:17 Set A/D encoding result=40
13:32:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:32:17 Set channel filter=0.000000e+000  result=40
13:32:17 Config A/D  Result=40
13:32:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:32:17 Get A/D filter: -9.255963e+061  result=40
13:32:17 Get A/D value=-858993460  result=40
13:32:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:32:17 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:32:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:32:17 Aux=
13:32:17 Message to Camera, serial 195179 queued
13:32:54 Received message from Master: op=PointingHead serial=195192
13:32:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:32:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:32:55 Point started: ret=0
13:32:55 point_skyscan result=0
13:32:55 Check angles
13:32:55 SkyScan query
13:32:56 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:32:56 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:32:56 Message to Master queued w/err=0: serial=195192 error=0
13:33:01 Received message from Master: op=Filter serial=195193
13:33:01 Color wheel filter change from 0 to 0
13:33:01 FLIGetFilterPos err=0  currentPosition=0
13:33:01 FLIGetStepsRemaining err=0  RemainingSteps=0
13:33:01 Filter is already there-color wheel unchanged
13:33:01 Received message from Master: op=Shutter serial=195194
13:33:01 Shutter LASER close
13:33:01 Received message from Camera: op=State serial=195196
13:33:01 GetSingleValue result=40  Value=cccccccc
13:33:01 SkyScan query
13:33:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:33:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:33:02 Parameters OK
13:33:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:33:02 Set A/D data flow result=40
13:33:02 Set A/D channel type result=40
13:33:02 Set A/D encoding result=40
13:33:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:33:02 Set channel filter=0.000000e+000  result=40
13:33:02 Config A/D  Result=40
13:33:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:33:02 Get A/D filter: -9.255963e+061  result=40
13:33:02 Get A/D value=-858993460  result=40
13:33:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:33:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:33:02 Parameters OK
13:33:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:33:02 Set A/D data flow result=40
13:33:02 Set A/D channel type result=40
13:33:02 Set A/D encoding result=40
13:33:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:33:02 Set channel filter=0.000000e+000  result=40
13:33:02 Config A/D  Result=40
13:33:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:33:02 Get A/D filter: -9.255963e+061  result=40
13:33:02 Get A/D value=-858993460  result=40
13:33:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:33:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:33:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:33:02 Aux=
13:33:02 Message to Camera, serial 195196 queued
13:33:36 Received message from Master: op=Identify serial=195204
13:33:37 Received message from Master: op=PointingHead serial=195211
13:33:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:33:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:33:38 Point started: ret=0
13:33:38 point_skyscan result=0
13:33:39 Check angles
13:33:39 SkyScan query
13:33:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:33:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:33:39 Message to Master queued w/err=0: serial=195211 error=0
13:33:44 Received message from Master: op=Filter serial=195212
13:33:44 Color wheel filter change from 0 to 0
13:33:44 FLIGetFilterPos err=0  currentPosition=0
13:33:44 FLIGetStepsRemaining err=0  RemainingSteps=0
13:33:44 Filter is already there-color wheel unchanged
13:33:44 Received message from Master: op=Shutter serial=195213
13:33:44 Shutter LASER close
13:33:44 Received message from Camera: op=State serial=195215
13:33:44 GetSingleValue result=40  Value=cccccccc
13:33:44 SkyScan query
13:33:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:33:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:33:45 Parameters OK
13:33:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:33:45 Set A/D data flow result=40
13:33:45 Set A/D channel type result=40
13:33:45 Set A/D encoding result=40
13:33:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:33:45 Set channel filter=0.000000e+000  result=40
13:33:45 Config A/D  Result=40
13:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:33:45 Get A/D filter: -9.255963e+061  result=40
13:33:45 Get A/D value=-858993460  result=40
13:33:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:33:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:33:45 Parameters OK
13:33:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:33:45 Set A/D data flow result=40
13:33:45 Set A/D channel type result=40
13:33:45 Set A/D encoding result=40
13:33:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:33:45 Set channel filter=0.000000e+000  result=40
13:33:45 Config A/D  Result=40
13:33:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:33:45 Get A/D filter: -9.255963e+061  result=40
13:33:45 Get A/D value=-858993460  result=40
13:33:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:33:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:33:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:33:45 Aux=
13:33:45 Message to Camera, serial 195215 queued
13:34:21 Received message from Master: op=PointingHead serial=195227
13:34:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:34:21 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:34:21 Point started: ret=0
13:34:21 point_skyscan result=0
13:34:22 Check angles
13:34:22 SkyScan query
13:34:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.445<-13563  Statuses=0008 0009
13:34:23 Msec=0  True Az=112.995  Ze=-23.445  Az status=0008  Ze status=0009
13:34:23 Check angles
13:34:23 SkyScan query
[UTC 2019-3-9  13:34:23]
13:34:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.415<-14961  Statuses=0008 0009
13:34:23 Msec=750  True Az=112.995  Ze=-44.415  Az status=0008  Ze status=0009
13:34:23 Check angles
13:34:23 SkyScan query
13:34:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.79<-16386  Statuses=0008 0009
13:34:24 Msec=1500  True Az=112.995  Ze=-65.79  Az status=0008  Ze status=0009
13:34:24 Check angles
13:34:24 SkyScan query
13:34:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.73<-17782  Statuses=0008 0009
13:34:25 Msec=2250  True Az=112.995  Ze=-86.73  Az status=0008  Ze status=0009
13:34:25 Check angles
13:34:25 SkyScan query
13:34:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.7<-19180  Statuses=0008 0009
13:34:26 Msec=3000  True Az=112.995  Ze=-107.7  Az status=0008  Ze status=0009
13:34:26 Check angles
13:34:26 SkyScan query
13:34:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.64<-20576  Statuses=0008 0009
13:34:26 Msec=3750  True Az=112.995  Ze=-128.64  Az status=0008  Ze status=0009
13:34:26 Check angles
13:34:26 SkyScan query
13:34:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.03<-22002  Statuses=0008 0009
13:34:27 Msec=4500  True Az=112.995  Ze=-150.03  Az status=0008  Ze status=0009
13:34:27 Check angles
13:34:27 SkyScan query
13:34:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.895<-23393  Statuses=0008 0009
13:34:28 Msec=5250  True Az=112.995  Ze=-170.895  Az status=0008  Ze status=0009
13:34:28 Check angles
13:34:28 SkyScan query
13:34:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:34:29 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:34:29 Message to Master queued w/err=0: serial=195227 error=0
13:34:34 Received message from Master: op=Filter serial=195228
13:34:34 Color wheel filter change from 0 to 0
13:34:34 FLIGetFilterPos err=0  currentPosition=0
13:34:34 FLIGetStepsRemaining err=0  RemainingSteps=0
13:34:34 Filter is already there-color wheel unchanged
13:34:34 Received message from Master: op=Shutter serial=195229
13:34:34 Shutter LASER open
13:34:34 Received message from Camera: op=State serial=195231
13:34:34 GetSingleValue result=40  Value=cccccccc
13:34:34 SkyScan query
13:34:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:34:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:34:34 Parameters OK
13:34:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:34:34 Set A/D data flow result=40
13:34:34 Set A/D channel type result=40
13:34:34 Set A/D encoding result=40
13:34:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:34:34 Set channel filter=0.000000e+000  result=40
13:34:34 Config A/D  Result=40
13:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:34:34 Get A/D filter: -9.255963e+061  result=40
13:34:34 Get A/D value=-858993460  result=40
13:34:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:34:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:34:34 Parameters OK
13:34:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:34:34 Set A/D data flow result=40
13:34:34 Set A/D channel type result=40
13:34:34 Set A/D encoding result=40
13:34:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:34:34 Set channel filter=0.000000e+000  result=40
13:34:34 Config A/D  Result=40
13:34:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:34:34 Get A/D filter: -9.255963e+061  result=40
13:34:34 Get A/D value=-858993460  result=40
13:34:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:34:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:34:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:34:34 Aux=
13:34:34 Message to Camera, serial 195231 queued
13:34:43 Received message from Master: op=Shutter serial=195241
13:34:43 Shutter LASER close
13:34:43 Received message from Master: op=PointingHead serial=195245
13:34:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:34:43 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:34:44 Point started: ret=0
13:34:44 point_skyscan result=0
13:34:45 Check angles
13:34:45 SkyScan query
13:34:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.22<-21548  Statuses=0008 0009
13:34:45 Msec=0  True Az=112.995  Ze=-143.22  Az status=0008  Ze status=0009
13:34:45 Check angles
13:34:45 SkyScan query
13:34:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.815<-20121  Statuses=0008 0009
13:34:46 Msec=750  True Az=112.995  Ze=-121.815  Az status=0008  Ze status=0009
13:34:46 Check angles
13:34:46 SkyScan query
13:34:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.89<-18726  Statuses=0008 0009
13:34:47 Msec=1500  True Az=112.995  Ze=-100.89  Az status=0008  Ze status=0009
13:34:47 Check angles
13:34:47 SkyScan query
13:34:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.95<-17330  Statuses=0008 0009
13:34:47 Msec=2250  True Az=112.995  Ze=-79.95  Az status=0008  Ze status=0009
13:34:48 Check angles
13:34:48 SkyScan query
13:34:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.995<-15933  Statuses=0008 0009
13:34:48 Msec=3000  True Az=112.995  Ze=-58.995  Az status=0008  Ze status=0009
13:34:48 Check angles
13:34:48 SkyScan query
13:34:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.59<-14506  Statuses=0008 0009
13:34:49 Msec=3750  True Az=112.995  Ze=-37.59  Az status=0008  Ze status=0009
13:34:49 Check angles
13:34:49 SkyScan query
13:34:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.605<-13107  Statuses=0008 0009
13:34:50 Msec=4500  True Az=112.995  Ze=-16.605  Az status=0008  Ze status=0009
13:34:50 Check angles
13:34:50 SkyScan query
13:34:50 SkyScan query done: ret=0  az=112.995<-7533  ze=4.275<-11715  Statuses=0008 0009
13:34:50 Msec=5250  True Az=112.995  Ze=4.275  Az status=0008  Ze status=0009
13:34:51 Check angles
13:34:51 SkyScan query
13:34:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:34:51 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:34:51 Message to Master queued w/err=0: serial=195245 error=0
13:34:56 Received message from Master: op=Filter serial=195246
13:34:56 Color wheel filter change from 0 to 0
13:34:56 FLIGetFilterPos err=0  currentPosition=0
13:34:56 FLIGetStepsRemaining err=0  RemainingSteps=0
13:34:56 Filter is already there-color wheel unchanged
13:34:56 Received message from Master: op=Shutter serial=195247
13:34:56 Shutter LASER close
13:34:57 Received message from Camera: op=State serial=195249
13:34:57 GetSingleValue result=40  Value=cccccccc
13:34:57 SkyScan query
13:34:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:34:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:34:57 Parameters OK
13:34:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:34:57 Set A/D data flow result=40
13:34:57 Set A/D channel type result=40
13:34:57 Set A/D encoding result=40
13:34:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:34:57 Set channel filter=0.000000e+000  result=40
13:34:57 Config A/D  Result=40
13:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:34:57 Get A/D filter: -9.255963e+061  result=40
13:34:57 Get A/D value=-858993460  result=40
13:34:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:34:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:34:57 Parameters OK
13:34:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:34:57 Set A/D data flow result=40
13:34:57 Set A/D channel type result=40
13:34:57 Set A/D encoding result=40
13:34:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:34:57 Set channel filter=0.000000e+000  result=40
13:34:57 Config A/D  Result=40
13:34:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:34:57 Get A/D filter: -9.255963e+061  result=40
13:34:57 Get A/D value=-858993460  result=40
13:34:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:34:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:34:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:34:57 Aux=
13:34:57 Message to Camera, serial 195249 queued
13:35:34 Received message from Master: op=PointingHead serial=195262
13:35:34 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:35:34 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:35:34 Point started: ret=0
13:35:34 point_skyscan result=0
13:35:35 Check angles
13:35:35 SkyScan query
13:35:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:35:36 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:35:36 Message to Master queued w/err=0: serial=195262 error=0
13:35:41 Received message from Master: op=Filter serial=195263
13:35:41 Color wheel filter change from 0 to 0
13:35:41 FLIGetFilterPos err=0  currentPosition=0
13:35:41 FLIGetStepsRemaining err=0  RemainingSteps=0
13:35:41 Filter is already there-color wheel unchanged
13:35:41 Received message from Master: op=Shutter serial=195264
13:35:41 Shutter LASER close
13:35:41 Received message from Camera: op=State serial=195266
13:35:41 GetSingleValue result=40  Value=cccccccc
13:35:41 SkyScan query
13:35:41 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:35:41 Parameters OK
13:35:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:35:41 Set A/D data flow result=40
13:35:41 Set A/D channel type result=40
13:35:41 Set A/D encoding result=40
13:35:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:35:41 Set channel filter=0.000000e+000  result=40
13:35:41 Config A/D  Result=40
13:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:35:41 Get A/D filter: -9.255963e+061  result=40
13:35:41 Get A/D value=-858993460  result=40
13:35:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:35:41 Parameters OK
13:35:41 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:35:41 Set A/D data flow result=40
13:35:41 Set A/D channel type result=40
13:35:41 Set A/D encoding result=40
13:35:41 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:35:41 Set channel filter=0.000000e+000  result=40
13:35:41 Config A/D  Result=40
13:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:35:41 Get A/D filter: -9.255963e+061  result=40
13:35:41 Get A/D value=-858993460  result=40
13:35:41 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:35:41 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:35:41 Aux=
13:35:41 Message to Camera, serial 195266 queued
13:36:17 Received message from Master: op=PointingHead serial=195278
13:36:17 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:36:17 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:36:18 Point started: ret=0
13:36:18 point_skyscan result=0
13:36:18 Check angles
13:36:18 SkyScan query
13:36:19 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
13:36:19 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
13:36:19 Check angles
13:36:19 SkyScan query
13:36:20 SkyScan query done: ret=0  az=153.885<-10259  ze=-6.495<-12433  Statuses=0009 0008
13:36:20 Msec=750  True Az=153.885  Ze=-6.495  Az status=0009  Ze status=0008
13:36:20 Check angles
13:36:20 SkyScan query
13:36:20 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
13:36:20 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
13:36:21 Check angles
13:36:21 SkyScan query
13:36:21 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:36:21 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:36:21 Message to Master queued w/err=0: serial=195278 error=0
13:36:26 Received message from Master: op=Filter serial=195279
13:36:26 Color wheel filter change from 0 to 0
13:36:26 FLIGetFilterPos err=0  currentPosition=0
13:36:26 FLIGetStepsRemaining err=0  RemainingSteps=0
13:36:26 Filter is already there-color wheel unchanged
13:36:26 Received message from Master: op=Shutter serial=195280
13:36:26 Shutter LASER close
13:36:26 Received message from Camera: op=State serial=195282
13:36:26 GetSingleValue result=40  Value=cccccccc
13:36:26 SkyScan query
13:36:27 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:36:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:36:27 Parameters OK
13:36:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:36:27 Set A/D data flow result=40
13:36:27 Set A/D channel type result=40
13:36:27 Set A/D encoding result=40
13:36:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:36:27 Set channel filter=0.000000e+000  result=40
13:36:27 Config A/D  Result=40
13:36:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:36:27 Get A/D filter: -9.255963e+061  result=40
13:36:27 Get A/D value=-858993460  result=40
13:36:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:36:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:36:27 Parameters OK
13:36:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:36:27 Set A/D data flow result=40
13:36:27 Set A/D channel type result=40
13:36:27 Set A/D encoding result=40
13:36:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:36:27 Set channel filter=0.000000e+000  result=40
13:36:27 Config A/D  Result=40
13:36:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:36:27 Get A/D filter: -9.255963e+061  result=40
13:36:27 Get A/D value=-858993460  result=40
13:36:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:36:27 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:36:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:36:27 Aux=
13:36:27 Message to Camera, serial 195282 queued
13:37:04 Received message from Master: op=PointingHead serial=195295
13:37:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:37:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:37:04 Point started: ret=0
13:37:04 point_skyscan result=0
13:37:05 Check angles
13:37:05 SkyScan query
13:37:06 SkyScan query done: ret=0  az=153.165<-10211  ze=6.51<-11566  Statuses=0009 0008
13:37:06 Msec=0  True Az=153.165  Ze=6.51  Az status=0009  Ze status=0008
13:37:06 Check angles
13:37:06 SkyScan query
13:37:06 SkyScan query done: ret=0  az=135.72<-9048  ze=6.495<-11567  Statuses=0009 0008
13:37:06 Msec=750  True Az=135.72  Ze=6.495  Az status=0009  Ze status=0008
13:37:06 Check angles
13:37:06 SkyScan query
13:37:07 SkyScan query done: ret=0  az=118.275<-7885  ze=6.495<-11567  Statuses=0009 0008
13:37:07 Msec=1500  True Az=118.275  Ze=6.495  Az status=0009  Ze status=0008
13:37:07 Check angles
13:37:07 SkyScan query
13:37:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:37:08 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:37:08 Message to Master queued w/err=0: serial=195295 error=0
13:37:13 Received message from Master: op=Filter serial=195296
13:37:13 Color wheel filter change from 0 to 0
13:37:13 FLIGetFilterPos err=0  currentPosition=0
13:37:13 FLIGetStepsRemaining err=0  RemainingSteps=0
13:37:13 Filter is already there-color wheel unchanged
13:37:13 Received message from Master: op=Shutter serial=195297
13:37:13 Shutter LASER close
13:37:13 Received message from Camera: op=State serial=195299
13:37:13 GetSingleValue result=40  Value=cccccccc
13:37:13 SkyScan query
13:37:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:37:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:37:14 Parameters OK
13:37:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:37:14 Set A/D data flow result=40
13:37:14 Set A/D channel type result=40
13:37:14 Set A/D encoding result=40
13:37:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:37:14 Set channel filter=0.000000e+000  result=40
13:37:14 Config A/D  Result=40
13:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:37:14 Get A/D filter: -9.255963e+061  result=40
13:37:14 Get A/D value=-858993460  result=40
13:37:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:37:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:37:14 Parameters OK
13:37:14 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:37:14 Set A/D data flow result=40
13:37:14 Set A/D channel type result=40
13:37:14 Set A/D encoding result=40
13:37:14 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:37:14 Set channel filter=0.000000e+000  result=40
13:37:14 Config A/D  Result=40
13:37:14 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:37:14 Get A/D filter: -9.255963e+061  result=40
13:37:14 Get A/D value=-858993460  result=40
13:37:14 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:37:14 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:37:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:37:14 Aux=
13:37:14 Message to Camera, serial 195299 queued
13:37:50 Received message from Master: op=PointingHead serial=195312
13:37:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:37:50 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:37:51 Point started: ret=0
13:37:51 point_skyscan result=0
13:37:52 Check angles
13:37:52 SkyScan query
13:37:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.595<-13573  Statuses=0008 0009
13:37:52 Msec=0  True Az=112.995  Ze=-23.595  Az status=0008  Ze status=0009
13:37:52 Check angles
13:37:52 SkyScan query
13:37:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.985<-14999  Statuses=0008 0009
13:37:53 Msec=750  True Az=112.995  Ze=-44.985  Az status=0008  Ze status=0009
13:37:53 Check angles
13:37:53 SkyScan query
13:37:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.94<-16396  Statuses=0008 0009
13:37:54 Msec=1500  True Az=112.995  Ze=-65.94  Az status=0008  Ze status=0009
13:37:54 Check angles
13:37:54 SkyScan query
13:37:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.865<-17791  Statuses=0008 0009
13:37:54 Msec=2250  True Az=112.995  Ze=-86.865  Az status=0008  Ze status=0009
13:37:55 Check angles
13:37:55 SkyScan query
13:37:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.85<-19190  Statuses=0008 0009
13:37:55 Msec=3000  True Az=112.995  Ze=-107.85  Az status=0008  Ze status=0009
13:37:55 Check angles
13:37:55 SkyScan query
13:37:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.775<-20585  Statuses=0008 0009
13:37:56 Msec=3750  True Az=112.995  Ze=-128.775  Az status=0008  Ze status=0009
13:37:56 Check angles
13:37:56 SkyScan query
13:37:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.745<-21983  Statuses=0008 0009
13:37:57 Msec=4500  True Az=112.995  Ze=-149.745  Az status=0008  Ze status=0009
13:37:57 Check angles
13:37:57 SkyScan query
13:37:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.67<-23378  Statuses=0008 0009
13:37:57 Msec=5250  True Az=112.995  Ze=-170.67  Az status=0008  Ze status=0009
13:37:58 Check angles
13:37:58 SkyScan query
13:37:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:37:58 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:37:58 Message to Master queued w/err=0: serial=195312 error=0
13:38:03 Received message from Master: op=Filter serial=195313
13:38:03 Color wheel filter change from 0 to 0
13:38:03 FLIGetFilterPos err=0  currentPosition=0
13:38:03 FLIGetStepsRemaining err=0  RemainingSteps=0
13:38:03 Filter is already there-color wheel unchanged
13:38:03 Received message from Master: op=Shutter serial=195314
13:38:03 Shutter LASER open
13:38:03 Received message from Camera: op=State serial=195316
13:38:03 GetSingleValue result=40  Value=cccccccc
13:38:03 SkyScan query
13:38:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:38:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:38:04 Parameters OK
13:38:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:38:04 Set A/D data flow result=40
13:38:04 Set A/D channel type result=40
13:38:04 Set A/D encoding result=40
13:38:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:38:04 Set channel filter=0.000000e+000  result=40
13:38:04 Config A/D  Result=40
13:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:38:04 Get A/D filter: -9.255963e+061  result=40
13:38:04 Get A/D value=-858993460  result=40
13:38:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:38:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:38:04 Parameters OK
13:38:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:38:04 Set A/D data flow result=40
13:38:04 Set A/D channel type result=40
13:38:04 Set A/D encoding result=40
13:38:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:38:04 Set channel filter=0.000000e+000  result=40
13:38:04 Config A/D  Result=40
13:38:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:38:04 Get A/D filter: -9.255963e+061  result=40
13:38:04 Get A/D value=-858993460  result=40
13:38:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:38:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:38:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:38:04 Aux=
13:38:04 Message to Camera, serial 195316 queued
13:38:12 Received message from Master: op=Shutter serial=195326
13:38:12 Shutter LASER close
13:38:13 Received message from Master: op=PointingHead serial=195330
13:38:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:38:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:38:13 Point started: ret=0
13:38:13 point_skyscan result=0
13:38:14 Check angles
13:38:14 SkyScan query
13:38:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.52<-21568  Statuses=0008 0009
13:38:15 Msec=0  True Az=112.995  Ze=-143.52  Az status=0008  Ze status=0009
13:38:15 Check angles
13:38:15 SkyScan query
13:38:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.55<-20170  Statuses=0008 0009
13:38:15 Msec=750  True Az=112.995  Ze=-122.55  Az status=0008  Ze status=0009
13:38:15 Check angles
13:38:15 SkyScan query
13:38:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.595<-18773  Statuses=0008 0009
13:38:16 Msec=1500  True Az=112.995  Ze=-101.595  Az status=0008  Ze status=0009
13:38:16 Check angles
13:38:16 SkyScan query
13:38:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.61<-17374  Statuses=0008 0009
13:38:17 Msec=2250  True Az=112.995  Ze=-80.61  Az status=0008  Ze status=0009
13:38:17 Check angles
13:38:17 SkyScan query
13:38:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.67<-15978  Statuses=0008 0009
13:38:18 Msec=3000  True Az=112.995  Ze=-59.67  Az status=0008  Ze status=0009
13:38:18 Check angles
13:38:18 SkyScan query
13:38:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.73<-14582  Statuses=0008 0009
13:38:18 Msec=3750  True Az=112.995  Ze=-38.73  Az status=0008  Ze status=0009
13:38:18 Check angles
13:38:18 SkyScan query
13:38:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.76<-13184  Statuses=0008 0009
13:38:19 Msec=4500  True Az=112.995  Ze=-17.76  Az status=0008  Ze status=0009
13:38:19 Check angles
13:38:19 SkyScan query
13:38:20 SkyScan query done: ret=0  az=112.995<-7533  ze=3.195<-11787  Statuses=0008 0009
13:38:20 Msec=5250  True Az=112.995  Ze=3.195  Az status=0008  Ze status=0009
13:38:20 Check angles
13:38:20 SkyScan query
13:38:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:38:21 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:38:21 Message to Master queued w/err=0: serial=195330 error=0
13:38:26 Received message from Master: op=Filter serial=195331
13:38:26 Color wheel filter change from 0 to 0
13:38:26 FLIGetFilterPos err=0  currentPosition=0
13:38:26 FLIGetStepsRemaining err=0  RemainingSteps=0
13:38:26 Filter is already there-color wheel unchanged
13:38:26 Received message from Master: op=Shutter serial=195332
13:38:26 Shutter LASER close
13:38:26 Received message from Camera: op=State serial=195334
13:38:26 GetSingleValue result=40  Value=cccccccc
13:38:26 SkyScan query
13:38:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:38:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:38:27 Parameters OK
13:38:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:38:27 Set A/D data flow result=40
13:38:27 Set A/D channel type result=40
13:38:27 Set A/D encoding result=40
13:38:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:38:27 Set channel filter=0.000000e+000  result=40
13:38:27 Config A/D  Result=40
13:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:38:27 Get A/D filter: -9.255963e+061  result=40
13:38:27 Get A/D value=-858993460  result=40
13:38:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:38:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:38:27 Parameters OK
13:38:27 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:38:27 Set A/D data flow result=40
13:38:27 Set A/D channel type result=40
13:38:27 Set A/D encoding result=40
13:38:27 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:38:27 Set channel filter=0.000000e+000  result=40
13:38:27 Config A/D  Result=40
13:38:27 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:38:27 Get A/D filter: -9.255963e+061  result=40
13:38:27 Get A/D value=-858993460  result=40
13:38:27 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:38:27 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:38:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:38:27 Aux=
13:38:27 Message to Camera, serial 195334 queued
13:39:03 Received message from Master: op=PointingHead serial=195347
13:39:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:39:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:39:04 Point started: ret=0
13:39:04 point_skyscan result=0
13:39:04 Check angles
13:39:04 SkyScan query
13:39:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:39:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:39:05 Message to Master queued w/err=0: serial=195347 error=0
13:39:10 Received message from Master: op=Filter serial=195348
13:39:10 Color wheel filter change from 0 to 0
13:39:10 FLIGetFilterPos err=0  currentPosition=0
13:39:10 FLIGetStepsRemaining err=0  RemainingSteps=0
13:39:10 Filter is already there-color wheel unchanged
13:39:10 Received message from Master: op=Shutter serial=195349
13:39:10 Shutter LASER close
13:39:10 Received message from Camera: op=State serial=195351
13:39:10 GetSingleValue result=40  Value=cccccccc
13:39:10 SkyScan query
13:39:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:39:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:39:11 Parameters OK
13:39:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:39:11 Set A/D data flow result=40
13:39:11 Set A/D channel type result=40
13:39:11 Set A/D encoding result=40
13:39:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:39:11 Set channel filter=0.000000e+000  result=40
13:39:11 Config A/D  Result=40
13:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:39:11 Get A/D filter: -9.255963e+061  result=40
13:39:11 Get A/D value=-858993460  result=40
13:39:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:39:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:39:11 Parameters OK
13:39:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:39:11 Set A/D data flow result=40
13:39:11 Set A/D channel type result=40
13:39:11 Set A/D encoding result=40
13:39:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:39:11 Set channel filter=0.000000e+000  result=40
13:39:11 Config A/D  Result=40
13:39:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:39:11 Get A/D filter: -9.255963e+061  result=40
13:39:11 Get A/D value=-858993460  result=40
13:39:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:39:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:39:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:39:11 Aux=
13:39:11 Message to Camera, serial 195351 queued
13:39:48 Received message from Master: op=PointingHead serial=195364
13:39:48 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:39:48 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:39:48 Point started: ret=0
13:39:48 point_skyscan result=0
13:39:49 Check angles
13:39:49 SkyScan query
13:39:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:39:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:39:49 Message to Master queued w/err=0: serial=195364 error=0
13:39:54 Received message from Master: op=Filter serial=195365
13:39:54 Color wheel filter change from 0 to 0
13:39:54 FLIGetFilterPos err=0  currentPosition=0
13:39:54 FLIGetStepsRemaining err=0  RemainingSteps=0
13:39:54 Filter is already there-color wheel unchanged
13:39:55 Received message from Master: op=Shutter serial=195366
13:39:55 Shutter LASER close
13:39:55 Received message from Camera: op=State serial=195368
13:39:55 GetSingleValue result=40  Value=cccccccc
13:39:55 SkyScan query
13:39:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:39:55 Parameters OK
13:39:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:39:55 Set A/D data flow result=40
13:39:55 Set A/D channel type result=40
13:39:55 Set A/D encoding result=40
13:39:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:39:55 Set channel filter=0.000000e+000  result=40
13:39:55 Config A/D  Result=40
13:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:39:55 Get A/D filter: -9.255963e+061  result=40
13:39:55 Get A/D value=-858993460  result=40
13:39:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:39:55 Parameters OK
13:39:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:39:55 Set A/D data flow result=40
13:39:55 Set A/D channel type result=40
13:39:55 Set A/D encoding result=40
13:39:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:39:55 Set channel filter=0.000000e+000  result=40
13:39:55 Config A/D  Result=40
13:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:39:55 Get A/D filter: -9.255963e+061  result=40
13:39:55 Get A/D value=-858993460  result=40
13:39:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:39:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:39:55 Aux=
13:39:55 Message to Camera, serial 195368 queued
13:40:32 Received message from Master: op=PointingHead serial=195381
13:40:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:40:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:40:32 Point started: ret=0
13:40:32 point_skyscan result=0
13:40:33 Check angles
13:40:33 SkyScan query
13:40:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:40:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:40:34 Message to Master queued w/err=0: serial=195381 error=0
13:40:39 Received message from Master: op=Filter serial=195382
13:40:39 Color wheel filter change from 0 to 0
13:40:39 FLIGetFilterPos err=0  currentPosition=0
13:40:39 FLIGetStepsRemaining err=0  RemainingSteps=0
13:40:39 Filter is already there-color wheel unchanged
13:40:39 Received message from Master: op=Shutter serial=195383
13:40:39 Shutter LASER close
13:40:39 Received message from Camera: op=State serial=195385
13:40:39 GetSingleValue result=40  Value=cccccccc
13:40:39 SkyScan query
13:40:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:40:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:40:39 Parameters OK
13:40:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:40:39 Set A/D data flow result=40
13:40:39 Set A/D channel type result=40
13:40:39 Set A/D encoding result=40
13:40:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:40:39 Set channel filter=0.000000e+000  result=40
13:40:39 Config A/D  Result=40
13:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:40:39 Get A/D filter: -9.255963e+061  result=40
13:40:39 Get A/D value=-858993460  result=40
13:40:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:40:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:40:39 Parameters OK
13:40:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:40:39 Set A/D data flow result=40
13:40:39 Set A/D channel type result=40
13:40:39 Set A/D encoding result=40
13:40:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:40:39 Set channel filter=0.000000e+000  result=40
13:40:39 Config A/D  Result=40
13:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:40:39 Get A/D filter: -9.255963e+061  result=40
13:40:39 Get A/D value=-858993460  result=40
13:40:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:40:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:40:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:40:39 Aux=
13:40:39 Message to Camera, serial 195385 queued
13:41:16 Received message from Master: op=PointingHead serial=195398
13:41:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:41:16 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:41:17 Point started: ret=0
13:41:17 point_skyscan result=0
13:41:17 Check angles
13:41:17 SkyScan query
13:41:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.775<-13585  Statuses=0008 0009
13:41:18 Msec=0  True Az=112.995  Ze=-23.775  Az status=0008  Ze status=0009
13:41:18 Check angles
13:41:18 SkyScan query
13:41:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.745<-14983  Statuses=0008 0009
13:41:19 Msec=750  True Az=112.995  Ze=-44.745  Az status=0008  Ze status=0009
13:41:19 Check angles
13:41:19 SkyScan query
13:41:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.685<-16379  Statuses=0008 0009
13:41:20 Msec=1500  True Az=112.995  Ze=-65.685  Az status=0008  Ze status=0009
13:41:20 Check angles
13:41:20 SkyScan query
13:41:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.625<-17775  Statuses=0008 0009
13:41:20 Msec=2250  True Az=112.995  Ze=-86.625  Az status=0008  Ze status=0009
13:41:20 Check angles
13:41:20 SkyScan query
13:41:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.61<-19174  Statuses=0008 0009
13:41:21 Msec=3000  True Az=112.995  Ze=-107.61  Az status=0008  Ze status=0009
13:41:21 Check angles
13:41:21 SkyScan query
13:41:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.535<-20569  Statuses=0008 0009
13:41:22 Msec=3750  True Az=112.995  Ze=-128.535  Az status=0008  Ze status=0009
13:41:22 Check angles
13:41:22 SkyScan query
13:41:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.475<-21965  Statuses=0008 0009
13:41:23 Msec=4500  True Az=112.995  Ze=-149.475  Az status=0008  Ze status=0009
13:41:23 Check angles
13:41:23 SkyScan query
13:41:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.445<-23363  Statuses=0008 0009
13:41:23 Msec=5250  True Az=112.995  Ze=-170.445  Az status=0008  Ze status=0009
13:41:23 Check angles
13:41:23 SkyScan query
13:41:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:41:24 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:41:24 Message to Master queued w/err=0: serial=195398 error=0
13:41:29 Received message from Master: op=Filter serial=195399
13:41:29 Color wheel filter change from 0 to 0
13:41:29 FLIGetFilterPos err=0  currentPosition=0
13:41:29 FLIGetStepsRemaining err=0  RemainingSteps=0
13:41:29 Filter is already there-color wheel unchanged
13:41:29 Received message from Master: op=Shutter serial=195400
13:41:29 Shutter LASER open
13:41:29 Received message from Camera: op=State serial=195402
13:41:29 GetSingleValue result=40  Value=cccccccc
13:41:29 SkyScan query
13:41:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:41:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:41:30 Parameters OK
13:41:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:41:30 Set A/D data flow result=40
13:41:30 Set A/D channel type result=40
13:41:30 Set A/D encoding result=40
13:41:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:41:30 Set channel filter=0.000000e+000  result=40
13:41:30 Config A/D  Result=40
13:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:41:30 Get A/D filter: -9.255963e+061  result=40
13:41:30 Get A/D value=-858993460  result=40
13:41:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:41:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:41:30 Parameters OK
13:41:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:41:30 Set A/D data flow result=40
13:41:30 Set A/D channel type result=40
13:41:30 Set A/D encoding result=40
13:41:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:41:30 Set channel filter=0.000000e+000  result=40
13:41:30 Config A/D  Result=40
13:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:41:30 Get A/D filter: -9.255963e+061  result=40
13:41:30 Get A/D value=-858993460  result=40
13:41:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:41:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:41:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:41:30 Aux=
13:41:30 Message to Camera, serial 195402 queued
13:41:38 Received message from Master: op=Shutter serial=195412
13:41:38 Shutter LASER close
13:41:39 Received message from Master: op=PointingHead serial=195416
13:41:39 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:41:39 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:41:39 Point started: ret=0
13:41:39 point_skyscan result=0
13:41:40 Check angles
13:41:40 SkyScan query
13:41:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.92<-21528  Statuses=0008 0009
13:41:41 Msec=0  True Az=112.995  Ze=-142.92  Az status=0008  Ze status=0009
13:41:41 Check angles
13:41:41 SkyScan query
13:41:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.95<-20130  Statuses=0008 0009
13:41:41 Msec=750  True Az=112.995  Ze=-121.95  Az status=0008  Ze status=0009
13:41:42 Check angles
13:41:42 SkyScan query
13:41:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.04<-18736  Statuses=0008 0009
13:41:42 Msec=1500  True Az=112.995  Ze=-101.04  Az status=0008  Ze status=0009
13:41:42 Check angles
13:41:42 SkyScan query
13:41:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.07<-17338  Statuses=0008 0009
13:41:43 Msec=2250  True Az=112.995  Ze=-80.07  Az status=0008  Ze status=0009
13:41:43 Check angles
13:41:43 SkyScan query
13:41:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.13<-15942  Statuses=0008 0009
13:41:44 Msec=3000  True Az=112.995  Ze=-59.13  Az status=0008  Ze status=0009
13:41:44 Check angles
13:41:44 SkyScan query
13:41:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.13<-14542  Statuses=0008 0009
13:41:44 Msec=3750  True Az=112.995  Ze=-38.13  Az status=0008  Ze status=0009
13:41:45 Check angles
13:41:45 SkyScan query
13:41:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
13:41:45 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
13:41:45 Check angles
13:41:45 SkyScan query
13:41:46 SkyScan query done: ret=0  az=112.995<-7533  ze=3.765<-11749  Statuses=0008 0009
13:41:46 Msec=5250  True Az=112.995  Ze=3.765  Az status=0008  Ze status=0009
13:41:46 Check angles
13:41:46 SkyScan query
13:41:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:41:47 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:41:47 Message to Master queued w/err=0: serial=195416 error=0
13:41:52 Received message from Master: op=Filter serial=195417
13:41:52 Color wheel filter change from 0 to 0
13:41:52 FLIGetFilterPos err=0  currentPosition=0
13:41:52 FLIGetStepsRemaining err=0  RemainingSteps=0
13:41:52 Filter is already there-color wheel unchanged
13:41:52 Received message from Master: op=Shutter serial=195418
13:41:52 Shutter LASER close
13:41:52 Received message from Camera: op=State serial=195420
13:41:52 GetSingleValue result=40  Value=cccccccc
13:41:52 SkyScan query
13:41:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:41:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:41:53 Parameters OK
13:41:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:41:53 Set A/D data flow result=40
13:41:53 Set A/D channel type result=40
13:41:53 Set A/D encoding result=40
13:41:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:41:53 Set channel filter=0.000000e+000  result=40
13:41:53 Config A/D  Result=40
13:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:41:53 Get A/D filter: -9.255963e+061  result=40
13:41:53 Get A/D value=-858993460  result=40
13:41:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:41:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:41:53 Parameters OK
13:41:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:41:53 Set A/D data flow result=40
13:41:53 Set A/D channel type result=40
13:41:53 Set A/D encoding result=40
13:41:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:41:53 Set channel filter=0.000000e+000  result=40
13:41:53 Config A/D  Result=40
13:41:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:41:53 Get A/D filter: -9.255963e+061  result=40
13:41:53 Get A/D value=-858993460  result=40
13:41:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:41:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:41:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:41:53 Aux=
13:41:53 Message to Camera, serial 195420 queued
13:42:29 Received message from Master: op=PointingHead serial=195433
13:42:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:42:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:42:30 Point started: ret=0
13:42:30 point_skyscan result=0
13:42:31 Check angles
13:42:31 SkyScan query
13:42:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:42:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:42:31 Message to Master queued w/err=0: serial=195433 error=0
13:42:36 Received message from Master: op=Filter serial=195434
13:42:36 Color wheel filter change from 0 to 0
13:42:36 FLIGetFilterPos err=0  currentPosition=0
13:42:36 FLIGetStepsRemaining err=0  RemainingSteps=0
13:42:36 Filter is already there-color wheel unchanged
13:42:36 Received message from Master: op=Shutter serial=195435
13:42:36 Shutter LASER close
13:42:36 Received message from Camera: op=State serial=195437
13:42:36 GetSingleValue result=40  Value=cccccccc
13:42:36 SkyScan query
13:42:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:42:37 Parameters OK
13:42:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:42:37 Set A/D data flow result=40
13:42:37 Set A/D channel type result=40
13:42:37 Set A/D encoding result=40
13:42:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:42:37 Set channel filter=0.000000e+000  result=40
13:42:37 Config A/D  Result=40
13:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:42:37 Get A/D filter: -9.255963e+061  result=40
13:42:37 Get A/D value=-858993460  result=40
13:42:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:42:37 Parameters OK
13:42:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:42:37 Set A/D data flow result=40
13:42:37 Set A/D channel type result=40
13:42:37 Set A/D encoding result=40
13:42:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:42:37 Set channel filter=0.000000e+000  result=40
13:42:37 Config A/D  Result=40
13:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:42:37 Get A/D filter: -9.255963e+061  result=40
13:42:37 Get A/D value=-858993460  result=40
13:42:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:42:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:42:37 Aux=
13:42:37 Message to Camera, serial 195437 queued
13:43:14 Received message from Master: op=PointingHead serial=195450
13:43:14 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:43:14 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:43:14 Point started: ret=0
13:43:14 point_skyscan result=0
13:43:15 Check angles
13:43:15 SkyScan query
13:43:15 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
13:43:15 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
13:43:16 Check angles
13:43:16 SkyScan query
13:43:16 SkyScan query done: ret=0  az=153.495<-10233  ze=-6.495<-12433  Statuses=0009 0008
13:43:16 Msec=750  True Az=153.495  Ze=-6.495  Az status=0009  Ze status=0008
13:43:16 Check angles
13:43:16 SkyScan query
13:43:17 SkyScan query done: ret=0  az=171.36<-11424  ze=-6.495<-12433  Statuses=0009 0008
13:43:17 Msec=1500  True Az=171.36  Ze=-6.495  Az status=0009  Ze status=0008
13:43:17 Check angles
13:43:17 SkyScan query
13:43:18 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:43:18 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:43:18 Message to Master queued w/err=0: serial=195450 error=0
13:43:23 Received message from Master: op=Filter serial=195451
13:43:23 Color wheel filter change from 0 to 0
13:43:23 FLIGetFilterPos err=0  currentPosition=0
13:43:23 FLIGetStepsRemaining err=0  RemainingSteps=0
13:43:23 Filter is already there-color wheel unchanged
13:43:23 Received message from Master: op=Shutter serial=195452
13:43:23 Shutter LASER close
13:43:23 Received message from Camera: op=State serial=195454
13:43:23 GetSingleValue result=40  Value=cccccccc
13:43:23 SkyScan query
13:43:24 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:43:24 Parameters OK
13:43:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:43:24 Set A/D data flow result=40
13:43:24 Set A/D channel type result=40
13:43:24 Set A/D encoding result=40
13:43:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:43:24 Set channel filter=0.000000e+000  result=40
13:43:24 Config A/D  Result=40
13:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:43:24 Get A/D filter: -9.255963e+061  result=40
13:43:24 Get A/D value=-858993460  result=40
13:43:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:43:24 Parameters OK
13:43:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:43:24 Set A/D data flow result=40
13:43:24 Set A/D channel type result=40
13:43:24 Set A/D encoding result=40
13:43:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:43:24 Set channel filter=0.000000e+000  result=40
13:43:24 Config A/D  Result=40
13:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:43:24 Get A/D filter: -9.255963e+061  result=40
13:43:24 Get A/D value=-858993460  result=40
13:43:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:43:24 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:43:24 Aux=
13:43:24 Message to Camera, serial 195454 queued
[UTC 2019-3-9  13:43:48]
13:44:00 Received message from Master: op=PointingHead serial=195467
13:44:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:44:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:44:01 Point started: ret=0
13:44:01 point_skyscan result=0
13:44:01 Check angles
13:44:01 SkyScan query
13:44:02 SkyScan query done: ret=0  az=152.865<-10191  ze=6.51<-11566  Statuses=0009 0008
13:44:02 Msec=0  True Az=152.865  Ze=6.51  Az status=0009  Ze status=0008
13:44:02 Check angles
13:44:02 SkyScan query
13:44:03 SkyScan query done: ret=0  az=135.42<-9028  ze=6.495<-11567  Statuses=0009 0008
13:44:03 Msec=750  True Az=135.42  Ze=6.495  Az status=0009  Ze status=0008
13:44:03 Check angles
13:44:03 SkyScan query
13:44:04 SkyScan query done: ret=0  az=118.005<-7867  ze=6.495<-11567  Statuses=0009 0008
13:44:04 Msec=1500  True Az=118.005  Ze=6.495  Az status=0009  Ze status=0008
13:44:04 Check angles
13:44:04 SkyScan query
13:44:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:44:04 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:44:04 Message to Master queued w/err=0: serial=195467 error=0
13:44:09 Received message from Master: op=Filter serial=195468
13:44:09 Color wheel filter change from 0 to 0
13:44:09 FLIGetFilterPos err=0  currentPosition=0
13:44:09 FLIGetStepsRemaining err=0  RemainingSteps=0
13:44:09 Filter is already there-color wheel unchanged
13:44:09 Received message from Master: op=Shutter serial=195469
13:44:09 Shutter LASER close
13:44:10 Received message from Camera: op=State serial=195471
13:44:10 GetSingleValue result=40  Value=cccccccc
13:44:10 SkyScan query
13:44:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:44:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:44:10 Parameters OK
13:44:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:44:10 Set A/D data flow result=40
13:44:10 Set A/D channel type result=40
13:44:10 Set A/D encoding result=40
13:44:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:44:10 Set channel filter=0.000000e+000  result=40
13:44:10 Config A/D  Result=40
13:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:44:10 Get A/D filter: -9.255963e+061  result=40
13:44:10 Get A/D value=-858993460  result=40
13:44:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:44:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:44:10 Parameters OK
13:44:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:44:10 Set A/D data flow result=40
13:44:10 Set A/D channel type result=40
13:44:10 Set A/D encoding result=40
13:44:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:44:10 Set channel filter=0.000000e+000  result=40
13:44:10 Config A/D  Result=40
13:44:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:44:10 Get A/D filter: -9.255963e+061  result=40
13:44:10 Get A/D value=-858993460  result=40
13:44:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:44:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:44:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:44:10 Aux=
13:44:10 Message to Camera, serial 195471 queued
13:44:47 Received message from Master: op=PointingHead serial=195484
13:44:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:44:47 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:44:47 Point started: ret=0
13:44:47 point_skyscan result=0
13:44:48 Check angles
13:44:48 SkyScan query
13:44:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
13:44:49 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
13:44:49 Check angles
13:44:49 SkyScan query
13:44:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
13:44:49 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
13:44:50 Check angles
13:44:50 SkyScan query
13:44:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.325<-16355  Statuses=0008 0009
13:44:50 Msec=1500  True Az=112.995  Ze=-65.325  Az status=0008  Ze status=0009
13:44:50 Check angles
13:44:50 SkyScan query
13:44:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.295<-17753  Statuses=0008 0009
13:44:51 Msec=2250  True Az=112.995  Ze=-86.295  Az status=0008  Ze status=0009
13:44:51 Check angles
13:44:51 SkyScan query
13:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
13:44:52 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
13:44:52 Check angles
13:44:52 SkyScan query
13:44:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.595<-20573  Statuses=0008 0009
13:44:52 Msec=3750  True Az=112.995  Ze=-128.595  Az status=0008  Ze status=0009
13:44:53 Check angles
13:44:53 SkyScan query
13:44:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.58<-21972  Statuses=0008 0009
13:44:53 Msec=4500  True Az=112.995  Ze=-149.58  Az status=0008  Ze status=0009
13:44:53 Check angles
13:44:53 SkyScan query
13:44:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.865<-23391  Statuses=0008 0009
13:44:54 Msec=5250  True Az=112.995  Ze=-170.865  Az status=0008  Ze status=0009
13:44:54 Check angles
13:44:54 SkyScan query
13:44:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:44:55 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:44:55 Message to Master queued w/err=0: serial=195484 error=0
13:45:00 Received message from Master: op=Filter serial=195485
13:45:00 Color wheel filter change from 0 to 0
13:45:00 FLIGetFilterPos err=0  currentPosition=0
13:45:00 FLIGetStepsRemaining err=0  RemainingSteps=0
13:45:00 Filter is already there-color wheel unchanged
13:45:00 Received message from Master: op=Shutter serial=195486
13:45:00 Shutter LASER open
13:45:00 Received message from Camera: op=State serial=195488
13:45:00 GetSingleValue result=40  Value=cccccccc
13:45:00 SkyScan query
13:45:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:45:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:45:01 Parameters OK
13:45:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:45:01 Set A/D data flow result=40
13:45:01 Set A/D channel type result=40
13:45:01 Set A/D encoding result=40
13:45:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:45:01 Set channel filter=0.000000e+000  result=40
13:45:01 Config A/D  Result=40
13:45:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:45:01 Get A/D filter: -9.255963e+061  result=40
13:45:01 Get A/D value=-858993460  result=40
13:45:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:45:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:45:01 Parameters OK
13:45:01 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:45:01 Set A/D data flow result=40
13:45:01 Set A/D channel type result=40
13:45:01 Set A/D encoding result=40
13:45:01 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:45:01 Set channel filter=0.000000e+000  result=40
13:45:01 Config A/D  Result=40
13:45:01 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:45:01 Get A/D filter: -9.255963e+061  result=40
13:45:01 Get A/D value=-858993460  result=40
13:45:01 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:45:01 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:45:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:45:01 Aux=
13:45:01 Message to Camera, serial 195488 queued
13:45:09 Received message from Master: op=Shutter serial=195498
13:45:09 Shutter LASER close
13:45:09 Received message from Master: op=PointingHead serial=195502
13:45:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:45:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:45:10 Point started: ret=0
13:45:10 point_skyscan result=0
13:45:11 Check angles
13:45:11 SkyScan query
13:45:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.415<-21561  Statuses=0008 0009
13:45:11 Msec=0  True Az=112.995  Ze=-143.415  Az status=0008  Ze status=0009
13:45:11 Check angles
13:45:11 SkyScan query
13:45:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.475<-20165  Statuses=0008 0009
13:45:12 Msec=750  True Az=112.995  Ze=-122.475  Az status=0008  Ze status=0009
13:45:12 Check angles
13:45:12 SkyScan query
13:45:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.49<-18766  Statuses=0008 0009
13:45:13 Msec=1500  True Az=112.995  Ze=-101.49  Az status=0008  Ze status=0009
13:45:13 Check angles
13:45:13 SkyScan query
13:45:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.52<-17368  Statuses=0008 0009
13:45:13 Msec=2250  True Az=112.995  Ze=-80.52  Az status=0008  Ze status=0009
13:45:14 Check angles
13:45:14 SkyScan query
13:45:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.595<-15973  Statuses=0008 0009
13:45:14 Msec=3000  True Az=112.995  Ze=-59.595  Az status=0008  Ze status=0009
13:45:14 Check angles
13:45:14 SkyScan query
13:45:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.625<-14575  Statuses=0008 0009
13:45:15 Msec=3750  True Az=112.995  Ze=-38.625  Az status=0008  Ze status=0009
13:45:15 Check angles
13:45:15 SkyScan query
13:45:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.25<-13150  Statuses=0008 0009
13:45:16 Msec=4500  True Az=112.995  Ze=-17.25  Az status=0008  Ze status=0009
13:45:16 Check angles
13:45:16 SkyScan query
13:45:16 SkyScan query done: ret=0  az=112.995<-7533  ze=4.125<-11725  Statuses=0008 0009
13:45:16 Msec=5250  True Az=112.995  Ze=4.125  Az status=0008  Ze status=0009
13:45:17 Check angles
13:45:17 SkyScan query
13:45:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:45:17 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:45:17 Message to Master queued w/err=0: serial=195502 error=0
13:45:22 Received message from Master: op=Filter serial=195503
13:45:22 Color wheel filter change from 0 to 0
13:45:22 FLIGetFilterPos err=0  currentPosition=0
13:45:22 FLIGetStepsRemaining err=0  RemainingSteps=0
13:45:22 Filter is already there-color wheel unchanged
13:45:22 Received message from Master: op=Shutter serial=195504
13:45:22 Shutter LASER close
13:45:22 Received message from Camera: op=State serial=195506
13:45:22 GetSingleValue result=40  Value=cccccccc
13:45:22 SkyScan query
13:45:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:45:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:45:23 Parameters OK
13:45:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:45:23 Set A/D data flow result=40
13:45:23 Set A/D channel type result=40
13:45:23 Set A/D encoding result=40
13:45:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:45:23 Set channel filter=0.000000e+000  result=40
13:45:23 Config A/D  Result=40
13:45:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:45:23 Get A/D filter: -9.255963e+061  result=40
13:45:23 Get A/D value=-858993460  result=40
13:45:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:45:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:45:23 Parameters OK
13:45:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:45:23 Set A/D data flow result=40
13:45:23 Set A/D channel type result=40
13:45:23 Set A/D encoding result=40
13:45:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:45:23 Set channel filter=0.000000e+000  result=40
13:45:23 Config A/D  Result=40
13:45:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:45:23 Get A/D filter: -9.255963e+061  result=40
13:45:23 Get A/D value=-858993460  result=40
13:45:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:45:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:45:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:45:23 Aux=
13:45:23 Message to Camera, serial 195506 queued
13:46:00 Received message from Master: op=PointingHead serial=195519
13:46:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:46:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:46:00 Point started: ret=0
13:46:00 point_skyscan result=0
13:46:01 Check angles
13:46:01 SkyScan query
13:46:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:46:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:46:02 Message to Master queued w/err=0: serial=195519 error=0
13:46:07 Received message from Master: op=Filter serial=195520
13:46:07 Color wheel filter change from 0 to 0
13:46:07 FLIGetFilterPos err=0  currentPosition=0
13:46:07 FLIGetStepsRemaining err=0  RemainingSteps=0
13:46:07 Filter is already there-color wheel unchanged
13:46:07 Received message from Master: op=Shutter serial=195521
13:46:07 Shutter LASER close
13:46:07 Received message from Camera: op=State serial=195523
13:46:07 GetSingleValue result=40  Value=cccccccc
13:46:07 SkyScan query
13:46:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:46:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:46:07 Parameters OK
13:46:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:46:07 Set A/D data flow result=40
13:46:07 Set A/D channel type result=40
13:46:07 Set A/D encoding result=40
13:46:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:46:07 Set channel filter=0.000000e+000  result=40
13:46:07 Config A/D  Result=40
13:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:46:07 Get A/D filter: -9.255963e+061  result=40
13:46:07 Get A/D value=-858993460  result=40
13:46:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:46:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:46:07 Parameters OK
13:46:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:46:07 Set A/D data flow result=40
13:46:07 Set A/D channel type result=40
13:46:07 Set A/D encoding result=40
13:46:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:46:07 Set channel filter=0.000000e+000  result=40
13:46:07 Config A/D  Result=40
13:46:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:46:07 Get A/D filter: -9.255963e+061  result=40
13:46:07 Get A/D value=-858993460  result=40
13:46:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:46:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:46:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:46:07 Aux=
13:46:07 Message to Camera, serial 195523 queued
13:46:44 Received message from Master: op=PointingHead serial=195536
13:46:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:46:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:46:45 Point started: ret=0
13:46:45 point_skyscan result=0
13:46:45 Check angles
13:46:45 SkyScan query
13:46:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:46:46 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:46:46 Message to Master queued w/err=0: serial=195536 error=0
13:46:51 Received message from Master: op=Filter serial=195537
13:46:51 Color wheel filter change from 0 to 0
13:46:51 FLIGetFilterPos err=0  currentPosition=0
13:46:51 FLIGetStepsRemaining err=0  RemainingSteps=0
13:46:51 Filter is already there-color wheel unchanged
13:46:51 Received message from Master: op=Shutter serial=195538
13:46:51 Shutter LASER close
13:46:51 Received message from Camera: op=State serial=195540
13:46:51 GetSingleValue result=40  Value=cccccccc
13:46:51 SkyScan query
13:46:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:46:52 Parameters OK
13:46:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:46:52 Set A/D data flow result=40
13:46:52 Set A/D channel type result=40
13:46:52 Set A/D encoding result=40
13:46:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:46:52 Set channel filter=0.000000e+000  result=40
13:46:52 Config A/D  Result=40
13:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:46:52 Get A/D filter: -9.255963e+061  result=40
13:46:52 Get A/D value=-858993460  result=40
13:46:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:46:52 Parameters OK
13:46:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:46:52 Set A/D data flow result=40
13:46:52 Set A/D channel type result=40
13:46:52 Set A/D encoding result=40
13:46:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:46:52 Set channel filter=0.000000e+000  result=40
13:46:52 Config A/D  Result=40
13:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:46:52 Get A/D filter: -9.255963e+061  result=40
13:46:52 Get A/D value=-858993460  result=40
13:46:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:46:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:46:52 Aux=
13:46:52 Message to Camera, serial 195540 queued
13:47:28 Received message from Master: op=PointingHead serial=195553
13:47:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:47:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:47:29 Point started: ret=0
13:47:29 point_skyscan result=0
13:47:30 Check angles
13:47:30 SkyScan query
13:47:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:47:30 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:47:30 Message to Master queued w/err=0: serial=195553 error=0
13:47:35 Received message from Master: op=Filter serial=195554
13:47:35 Color wheel filter change from 0 to 0
13:47:35 FLIGetFilterPos err=0  currentPosition=0
13:47:35 FLIGetStepsRemaining err=0  RemainingSteps=0
13:47:35 Filter is already there-color wheel unchanged
13:47:35 Received message from Master: op=Shutter serial=195555
13:47:35 Shutter LASER close
13:47:35 Received message from Camera: op=State serial=195557
13:47:35 GetSingleValue result=40  Value=cccccccc
13:47:35 SkyScan query
13:47:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:47:36 Parameters OK
13:47:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:47:36 Set A/D data flow result=40
13:47:36 Set A/D channel type result=40
13:47:36 Set A/D encoding result=40
13:47:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:47:36 Set channel filter=0.000000e+000  result=40
13:47:36 Config A/D  Result=40
13:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:47:36 Get A/D filter: -9.255963e+061  result=40
13:47:36 Get A/D value=-858993460  result=40
13:47:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:47:36 Parameters OK
13:47:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:47:36 Set A/D data flow result=40
13:47:36 Set A/D channel type result=40
13:47:36 Set A/D encoding result=40
13:47:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:47:36 Set channel filter=0.000000e+000  result=40
13:47:36 Config A/D  Result=40
13:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:47:36 Get A/D filter: -9.255963e+061  result=40
13:47:36 Get A/D value=-858993460  result=40
13:47:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:47:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:47:36 Aux=
13:47:36 Message to Camera, serial 195557 queued
13:48:13 Received message from Master: op=PointingHead serial=195570
13:48:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:48:13 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:48:13 Point started: ret=0
13:48:13 point_skyscan result=0
13:48:14 Check angles
13:48:14 SkyScan query
13:48:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.475<-13565  Statuses=0008 0009
13:48:14 Msec=0  True Az=112.995  Ze=-23.475  Az status=0008  Ze status=0009
13:48:15 Check angles
13:48:15 SkyScan query
13:48:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.865<-14991  Statuses=0008 0009
13:48:15 Msec=750  True Az=112.995  Ze=-44.865  Az status=0008  Ze status=0009
13:48:15 Check angles
13:48:15 SkyScan query
13:48:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.82<-16388  Statuses=0008 0009
13:48:16 Msec=1500  True Az=112.995  Ze=-65.82  Az status=0008  Ze status=0009
13:48:16 Check angles
13:48:16 SkyScan query
13:48:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.76<-17784  Statuses=0008 0009
13:48:17 Msec=2250  True Az=112.995  Ze=-86.76  Az status=0008  Ze status=0009
13:48:17 Check angles
13:48:17 SkyScan query
13:48:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.73<-19182  Statuses=0008 0009
13:48:18 Msec=3000  True Az=112.995  Ze=-107.73  Az status=0008  Ze status=0009
13:48:18 Check angles
13:48:18 SkyScan query
13:48:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.655<-20577  Statuses=0008 0009
13:48:18 Msec=3750  True Az=112.995  Ze=-128.655  Az status=0008  Ze status=0009
13:48:18 Check angles
13:48:18 SkyScan query
13:48:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.06<-22004  Statuses=0008 0009
13:48:19 Msec=4500  True Az=112.995  Ze=-150.06  Az status=0008  Ze status=0009
13:48:19 Check angles
13:48:19 SkyScan query
13:48:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.91<-23394  Statuses=0008 0009
13:48:20 Msec=5250  True Az=112.995  Ze=-170.91  Az status=0008  Ze status=0009
13:48:20 Check angles
13:48:20 SkyScan query
13:48:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:48:21 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:48:21 Message to Master queued w/err=0: serial=195570 error=0
13:48:26 Received message from Master: op=Filter serial=195571
13:48:26 Color wheel filter change from 0 to 0
13:48:26 FLIGetFilterPos err=0  currentPosition=0
13:48:26 FLIGetStepsRemaining err=0  RemainingSteps=0
13:48:26 Filter is already there-color wheel unchanged
13:48:26 Received message from Master: op=Shutter serial=195572
13:48:26 Shutter LASER open
13:48:26 Received message from Camera: op=State serial=195574
13:48:26 GetSingleValue result=40  Value=cccccccc
13:48:26 SkyScan query
13:48:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:48:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:48:26 Parameters OK
13:48:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:48:26 Set A/D data flow result=40
13:48:26 Set A/D channel type result=40
13:48:26 Set A/D encoding result=40
13:48:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:48:26 Set channel filter=0.000000e+000  result=40
13:48:26 Config A/D  Result=40
13:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:48:26 Get A/D filter: -9.255963e+061  result=40
13:48:26 Get A/D value=-858993460  result=40
13:48:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:48:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:48:26 Parameters OK
13:48:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:48:26 Set A/D data flow result=40
13:48:26 Set A/D channel type result=40
13:48:26 Set A/D encoding result=40
13:48:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:48:26 Set channel filter=0.000000e+000  result=40
13:48:26 Config A/D  Result=40
13:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:48:26 Get A/D filter: -9.255963e+061  result=40
13:48:26 Get A/D value=-858993460  result=40
13:48:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:48:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:48:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:48:26 Aux=
13:48:26 Message to Camera, serial 195574 queued
13:48:35 Received message from Master: op=Shutter serial=195584
13:48:35 Shutter LASER close
13:48:35 Received message from Master: op=PointingHead serial=195588
13:48:35 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:48:35 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:48:36 Point started: ret=0
13:48:36 point_skyscan result=0
13:48:37 Check angles
13:48:37 SkyScan query
13:48:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.665<-21511  Statuses=0008 0009
13:48:37 Msec=0  True Az=112.995  Ze=-142.665  Az status=0008  Ze status=0009
13:48:37 Check angles
13:48:37 SkyScan query
13:48:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.695<-20113  Statuses=0008 0009
13:48:38 Msec=750  True Az=112.995  Ze=-121.695  Az status=0008  Ze status=0009
13:48:38 Check angles
13:48:38 SkyScan query
13:48:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
13:48:39 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
13:48:39 Check angles
13:48:39 SkyScan query
13:48:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.815<-17321  Statuses=0008 0009
13:48:39 Msec=2250  True Az=112.995  Ze=-79.815  Az status=0008  Ze status=0009
13:48:40 Check angles
13:48:40 SkyScan query
13:48:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
13:48:40 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
13:48:40 Check angles
13:48:40 SkyScan query
13:48:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.47<-14498  Statuses=0008 0009
13:48:41 Msec=3750  True Az=112.995  Ze=-37.47  Az status=0008  Ze status=0009
13:48:41 Check angles
13:48:41 SkyScan query
13:48:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.485<-13099  Statuses=0008 0009
13:48:42 Msec=4500  True Az=112.995  Ze=-16.485  Az status=0008  Ze status=0009
13:48:42 Check angles
13:48:42 SkyScan query
13:48:42 SkyScan query done: ret=0  az=112.995<-7533  ze=4.38<-11708  Statuses=0008 0009
13:48:42 Msec=5250  True Az=112.995  Ze=4.38  Az status=0008  Ze status=0009
13:48:43 Check angles
13:48:43 SkyScan query
13:48:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:48:43 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:48:43 Message to Master queued w/err=0: serial=195588 error=0
13:48:48 Received message from Master: op=Filter serial=195589
13:48:48 Color wheel filter change from 0 to 0
13:48:48 FLIGetFilterPos err=0  currentPosition=0
13:48:48 FLIGetStepsRemaining err=0  RemainingSteps=0
13:48:48 Filter is already there-color wheel unchanged
13:48:48 Received message from Master: op=Shutter serial=195590
13:48:48 Shutter LASER close
13:48:49 Received message from Camera: op=State serial=195592
13:48:49 GetSingleValue result=40  Value=cccccccc
13:48:49 SkyScan query
13:48:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:48:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:48:49 Parameters OK
13:48:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:48:49 Set A/D data flow result=40
13:48:49 Set A/D channel type result=40
13:48:49 Set A/D encoding result=40
13:48:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:48:49 Set channel filter=0.000000e+000  result=40
13:48:49 Config A/D  Result=40
13:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:48:49 Get A/D filter: -9.255963e+061  result=40
13:48:49 Get A/D value=-858993460  result=40
13:48:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:48:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:48:49 Parameters OK
13:48:49 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:48:49 Set A/D data flow result=40
13:48:49 Set A/D channel type result=40
13:48:49 Set A/D encoding result=40
13:48:49 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:48:49 Set channel filter=0.000000e+000  result=40
13:48:49 Config A/D  Result=40
13:48:49 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:48:49 Get A/D filter: -9.255963e+061  result=40
13:48:49 Get A/D value=-858993460  result=40
13:48:49 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:48:49 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:48:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:48:49 Aux=
13:48:49 Message to Camera, serial 195592 queued
13:49:26 Received message from Master: op=PointingHead serial=195605
13:49:26 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:49:26 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:49:26 Point started: ret=0
13:49:26 point_skyscan result=0
13:49:27 Check angles
13:49:27 SkyScan query
13:49:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:49:28 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:49:28 Message to Master queued w/err=0: serial=195605 error=0
13:49:33 Received message from Master: op=Filter serial=195606
13:49:33 Color wheel filter change from 0 to 0
13:49:33 FLIGetFilterPos err=0  currentPosition=0
13:49:33 FLIGetStepsRemaining err=0  RemainingSteps=0
13:49:33 Filter is already there-color wheel unchanged
13:49:33 Received message from Master: op=Shutter serial=195607
13:49:33 Shutter LASER close
13:49:33 Received message from Camera: op=State serial=195609
13:49:33 GetSingleValue result=40  Value=cccccccc
13:49:33 SkyScan query
13:49:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:49:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:49:33 Parameters OK
13:49:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:49:33 Set A/D data flow result=40
13:49:33 Set A/D channel type result=40
13:49:33 Set A/D encoding result=40
13:49:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:49:33 Set channel filter=0.000000e+000  result=40
13:49:33 Config A/D  Result=40
13:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:49:33 Get A/D filter: -9.255963e+061  result=40
13:49:33 Get A/D value=-858993460  result=40
13:49:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:49:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:49:33 Parameters OK
13:49:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:49:33 Set A/D data flow result=40
13:49:33 Set A/D channel type result=40
13:49:33 Set A/D encoding result=40
13:49:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:49:33 Set channel filter=0.000000e+000  result=40
13:49:33 Config A/D  Result=40
13:49:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:49:33 Get A/D filter: -9.255963e+061  result=40
13:49:33 Get A/D value=-858993460  result=40
13:49:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:49:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:49:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:49:33 Aux=
13:49:33 Message to Camera, serial 195609 queued
13:50:10 Received message from Master: op=PointingHead serial=195622
13:50:10 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:50:10 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:50:11 Point started: ret=0
13:50:11 point_skyscan result=0
13:50:11 Check angles
13:50:11 SkyScan query
13:50:12 SkyScan query done: ret=0  az=135.72<-9048  ze=-6.51<-12434  Statuses=0009 0008
13:50:12 Msec=0  True Az=135.72  Ze=-6.51  Az status=0009  Ze status=0008
13:50:12 Check angles
13:50:12 SkyScan query
13:50:13 SkyScan query done: ret=0  az=153.495<-10233  ze=-6.495<-12433  Statuses=0009 0008
13:50:13 Msec=750  True Az=153.495  Ze=-6.495  Az status=0009  Ze status=0008
13:50:13 Check angles
13:50:13 SkyScan query
13:50:13 SkyScan query done: ret=0  az=171.36<-11424  ze=-6.495<-12433  Statuses=0009 0008
13:50:13 Msec=1500  True Az=171.36  Ze=-6.495  Az status=0009  Ze status=0008
13:50:14 Check angles
13:50:14 SkyScan query
13:50:14 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:50:14 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:50:14 Message to Master queued w/err=0: serial=195622 error=0
13:50:19 Received message from Master: op=Filter serial=195623
13:50:19 Color wheel filter change from 0 to 0
13:50:19 FLIGetFilterPos err=0  currentPosition=0
13:50:19 FLIGetStepsRemaining err=0  RemainingSteps=0
13:50:19 Filter is already there-color wheel unchanged
13:50:19 Received message from Master: op=Shutter serial=195624
13:50:19 Shutter LASER close
13:50:19 Received message from Camera: op=State serial=195626
13:50:19 GetSingleValue result=40  Value=cccccccc
13:50:19 SkyScan query
13:50:20 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:50:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:50:20 Parameters OK
13:50:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:50:20 Set A/D data flow result=40
13:50:20 Set A/D channel type result=40
13:50:20 Set A/D encoding result=40
13:50:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:50:20 Set channel filter=0.000000e+000  result=40
13:50:20 Config A/D  Result=40
13:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:50:20 Get A/D filter: -9.255963e+061  result=40
13:50:20 Get A/D value=-858993460  result=40
13:50:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:50:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:50:20 Parameters OK
13:50:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:50:20 Set A/D data flow result=40
13:50:20 Set A/D channel type result=40
13:50:20 Set A/D encoding result=40
13:50:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:50:20 Set channel filter=0.000000e+000  result=40
13:50:20 Config A/D  Result=40
13:50:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:50:20 Get A/D filter: -9.255963e+061  result=40
13:50:20 Get A/D value=-858993460  result=40
13:50:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:50:20 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:50:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:50:20 Aux=
13:50:20 Message to Camera, serial 195626 queued
13:50:57 Received message from Master: op=PointingHead serial=195639
13:50:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:50:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:50:57 Point started: ret=0
13:50:57 point_skyscan result=0
13:50:58 Check angles
13:50:58 SkyScan query
13:50:58 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
13:50:58 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
13:50:59 Check angles
13:50:59 SkyScan query
13:50:59 SkyScan query done: ret=0  az=135.42<-9028  ze=6.495<-11567  Statuses=0009 0008
13:50:59 Msec=750  True Az=135.42  Ze=6.495  Az status=0009  Ze status=0008
13:50:59 Check angles
13:50:59 SkyScan query
13:51:00 SkyScan query done: ret=0  az=117.6<-7840  ze=6.495<-11567  Statuses=0009 0008
13:51:00 Msec=1500  True Az=117.6  Ze=6.495  Az status=0009  Ze status=0008
13:51:00 Check angles
13:51:00 SkyScan query
13:51:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:51:01 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:51:01 Message to Master queued w/err=0: serial=195639 error=0
13:51:06 Received message from Master: op=Filter serial=195640
13:51:06 Color wheel filter change from 0 to 0
13:51:06 FLIGetFilterPos err=0  currentPosition=0
13:51:06 FLIGetStepsRemaining err=0  RemainingSteps=0
13:51:06 Filter is already there-color wheel unchanged
13:51:06 Received message from Master: op=Shutter serial=195641
13:51:06 Shutter LASER close
13:51:06 Received message from Camera: op=State serial=195643
13:51:06 GetSingleValue result=40  Value=cccccccc
13:51:06 SkyScan query
13:51:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:51:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:51:06 Parameters OK
13:51:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:51:06 Set A/D data flow result=40
13:51:06 Set A/D channel type result=40
13:51:06 Set A/D encoding result=40
13:51:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:51:06 Set channel filter=0.000000e+000  result=40
13:51:06 Config A/D  Result=40
13:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:51:06 Get A/D filter: -9.255963e+061  result=40
13:51:06 Get A/D value=-858993460  result=40
13:51:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:51:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:51:06 Parameters OK
13:51:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:51:06 Set A/D data flow result=40
13:51:06 Set A/D channel type result=40
13:51:06 Set A/D encoding result=40
13:51:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:51:06 Set channel filter=0.000000e+000  result=40
13:51:06 Config A/D  Result=40
13:51:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:51:06 Get A/D filter: -9.255963e+061  result=40
13:51:06 Get A/D value=-858993460  result=40
13:51:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:51:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:51:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:51:06 Aux=
13:51:06 Message to Camera, serial 195643 queued
13:51:43 Received message from Master: op=PointingHead serial=195656
13:51:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:51:43 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:51:44 Point started: ret=0
13:51:44 point_skyscan result=0
13:51:44 Check angles
13:51:44 SkyScan query
13:51:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.13<-13542  Statuses=0008 0009
13:51:45 Msec=0  True Az=112.995  Ze=-23.13  Az status=0008  Ze status=0009
13:51:45 Check angles
13:51:45 SkyScan query
13:51:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.535<-14969  Statuses=0008 0009
13:51:46 Msec=750  True Az=112.995  Ze=-44.535  Az status=0008  Ze status=0009
13:51:46 Check angles
13:51:46 SkyScan query
13:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.91<-16394  Statuses=0008 0009
13:51:47 Msec=1500  True Az=112.995  Ze=-65.91  Az status=0008  Ze status=0009
13:51:47 Check angles
13:51:47 SkyScan query
13:51:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
13:51:47 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
13:51:48 Check angles
13:51:48 SkyScan query
13:51:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.255<-19217  Statuses=0008 0009
13:51:48 Msec=3000  True Az=112.995  Ze=-108.255  Az status=0008  Ze status=0009
13:51:48 Check angles
13:51:48 SkyScan query
13:51:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.645<-20643  Statuses=0008 0009
13:51:49 Msec=3750  True Az=112.995  Ze=-129.645  Az status=0008  Ze status=0009
13:51:49 Check angles
13:51:49 SkyScan query
13:51:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.005<-22067  Statuses=0008 0009
13:51:50 Msec=4500  True Az=112.995  Ze=-151.005  Az status=0008  Ze status=0009
13:51:50 Check angles
13:51:50 SkyScan query
13:51:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.615<-23441  Statuses=0008 0009
13:51:50 Msec=5250  True Az=112.995  Ze=-171.615  Az status=0008  Ze status=0009
13:51:51 Check angles
13:51:51 SkyScan query
13:51:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:51:51 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:51:51 Message to Master queued w/err=0: serial=195656 error=0
13:51:56 Received message from Master: op=Filter serial=195657
13:51:56 Color wheel filter change from 0 to 0
13:51:56 FLIGetFilterPos err=0  currentPosition=0
13:51:56 FLIGetStepsRemaining err=0  RemainingSteps=0
13:51:56 Filter is already there-color wheel unchanged
13:51:56 Received message from Master: op=Shutter serial=195658
13:51:56 Shutter LASER open
13:51:56 Received message from Camera: op=State serial=195660
13:51:56 GetSingleValue result=40  Value=cccccccc
13:51:56 SkyScan query
13:51:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:51:57 Parameters OK
13:51:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:51:57 Set A/D data flow result=40
13:51:57 Set A/D channel type result=40
13:51:57 Set A/D encoding result=40
13:51:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:51:57 Set channel filter=0.000000e+000  result=40
13:51:57 Config A/D  Result=40
13:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:51:57 Get A/D filter: -9.255963e+061  result=40
13:51:57 Get A/D value=-858993460  result=40
13:51:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:51:57 Parameters OK
13:51:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:51:57 Set A/D data flow result=40
13:51:57 Set A/D channel type result=40
13:51:57 Set A/D encoding result=40
13:51:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:51:57 Set channel filter=0.000000e+000  result=40
13:51:57 Config A/D  Result=40
13:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:51:57 Get A/D filter: -9.255963e+061  result=40
13:51:57 Get A/D value=-858993460  result=40
13:51:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:51:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:51:57 Aux=
13:51:57 Message to Camera, serial 195660 queued
13:52:05 Received message from Master: op=Shutter serial=195670
13:52:05 Shutter LASER close
13:52:06 Received message from Master: op=PointingHead serial=195674
13:52:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:52:06 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:52:06 Point started: ret=0
13:52:06 point_skyscan result=0
13:52:07 Check angles
13:52:07 SkyScan query
13:52:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.98<-21532  Statuses=0008 0009
13:52:08 Msec=0  True Az=112.995  Ze=-142.98  Az status=0008  Ze status=0009
13:52:08 Check angles
13:52:08 SkyScan query
13:52:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.01<-20134  Statuses=0008 0009
13:52:08 Msec=750  True Az=112.995  Ze=-122.01  Az status=0008  Ze status=0009
13:52:09 Check angles
13:52:09 SkyScan query
13:52:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.635<-18709  Statuses=0008 0009
13:52:09 Msec=1500  True Az=112.995  Ze=-100.635  Az status=0008  Ze status=0009
13:52:09 Check angles
13:52:09 SkyScan query
13:52:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.695<-17313  Statuses=0008 0009
13:52:10 Msec=2250  True Az=112.995  Ze=-79.695  Az status=0008  Ze status=0009
13:52:10 Check angles
13:52:10 SkyScan query
13:52:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.755<-15917  Statuses=0008 0009
13:52:11 Msec=3000  True Az=112.995  Ze=-58.755  Az status=0008  Ze status=0009
13:52:11 Check angles
13:52:11 SkyScan query
13:52:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.35<-14490  Statuses=0008 0009
13:52:11 Msec=3750  True Az=112.995  Ze=-37.35  Az status=0008  Ze status=0009
13:52:12 Check angles
13:52:12 SkyScan query
13:52:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-15.945<-13063  Statuses=0008 0009
13:52:12 Msec=4500  True Az=112.995  Ze=-15.945  Az status=0008  Ze status=0009
13:52:12 Check angles
13:52:12 SkyScan query
13:52:13 SkyScan query done: ret=0  az=112.995<-7533  ze=4.8<-11680  Statuses=0008 0009
13:52:13 Msec=5250  True Az=112.995  Ze=4.8  Az status=0008  Ze status=0009
13:52:13 Check angles
13:52:13 SkyScan query
13:52:14 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:52:14 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:52:14 Message to Master queued w/err=0: serial=195674 error=0
13:52:19 Received message from Master: op=Filter serial=195675
13:52:19 Color wheel filter change from 0 to 0
13:52:19 FLIGetFilterPos err=0  currentPosition=0
13:52:19 FLIGetStepsRemaining err=0  RemainingSteps=0
13:52:19 Filter is already there-color wheel unchanged
13:52:19 Received message from Master: op=Shutter serial=195676
13:52:19 Shutter LASER close
13:52:19 Received message from Camera: op=State serial=195678
13:52:19 GetSingleValue result=40  Value=cccccccc
13:52:19 SkyScan query
13:52:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:52:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:52:20 Parameters OK
13:52:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:52:20 Set A/D data flow result=40
13:52:20 Set A/D channel type result=40
13:52:20 Set A/D encoding result=40
13:52:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:52:20 Set channel filter=0.000000e+000  result=40
13:52:20 Config A/D  Result=40
13:52:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:52:20 Get A/D filter: -9.255963e+061  result=40
13:52:20 Get A/D value=-858993460  result=40
13:52:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:52:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:52:20 Parameters OK
13:52:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:52:20 Set A/D data flow result=40
13:52:20 Set A/D channel type result=40
13:52:20 Set A/D encoding result=40
13:52:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:52:20 Set channel filter=0.000000e+000  result=40
13:52:20 Config A/D  Result=40
13:52:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:52:20 Get A/D filter: -9.255963e+061  result=40
13:52:20 Get A/D value=-858993460  result=40
13:52:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:52:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:52:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:52:20 Aux=
13:52:20 Message to Camera, serial 195678 queued
13:52:56 Received message from Master: op=PointingHead serial=195691
13:52:56 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:52:56 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:52:57 Point started: ret=0
13:52:57 point_skyscan result=0
13:52:58 Check angles
13:52:58 SkyScan query
13:52:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:52:58 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:52:58 Message to Master queued w/err=0: serial=195691 error=0
13:53:03 Received message from Master: op=Filter serial=195692
13:53:03 Color wheel filter change from 0 to 0
13:53:03 FLIGetFilterPos err=0  currentPosition=0
13:53:03 FLIGetStepsRemaining err=0  RemainingSteps=0
13:53:03 Filter is already there-color wheel unchanged
13:53:03 Received message from Master: op=Shutter serial=195693
13:53:03 Shutter LASER close
13:53:03 Received message from Camera: op=State serial=195695
13:53:03 GetSingleValue result=40  Value=cccccccc
13:53:03 SkyScan query
13:53:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:53:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:53:04 Parameters OK
13:53:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:53:04 Set A/D data flow result=40
13:53:04 Set A/D channel type result=40
13:53:04 Set A/D encoding result=40
13:53:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:53:04 Set channel filter=0.000000e+000  result=40
13:53:04 Config A/D  Result=40
13:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:53:04 Get A/D filter: -9.255963e+061  result=40
13:53:04 Get A/D value=-858993460  result=40
13:53:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:53:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:53:04 Parameters OK
13:53:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:53:04 Set A/D data flow result=40
13:53:04 Set A/D channel type result=40
13:53:04 Set A/D encoding result=40
13:53:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:53:04 Set channel filter=0.000000e+000  result=40
13:53:04 Config A/D  Result=40
13:53:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:53:04 Get A/D filter: -9.255963e+061  result=40
13:53:04 Get A/D value=-858993460  result=40
13:53:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:53:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:53:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:53:04 Aux=
13:53:04 Message to Camera, serial 195695 queued
13:53:41 Received message from Master: op=PointingHead serial=195708
13:53:41 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:53:41 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:53:41 Point started: ret=0
13:53:41 point_skyscan result=0
13:53:42 Check angles
13:53:42 SkyScan query
13:53:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:53:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:53:42 Message to Master queued w/err=0: serial=195708 error=0
13:53:47 Received message from Master: op=Filter serial=195709
13:53:47 Color wheel filter change from 0 to 0
13:53:47 FLIGetFilterPos err=0  currentPosition=0
13:53:47 FLIGetStepsRemaining err=0  RemainingSteps=0
13:53:47 Filter is already there-color wheel unchanged
13:53:48 Received message from Master: op=Shutter serial=195710
13:53:48 Shutter LASER close
13:53:48 Received message from Camera: op=State serial=195712
13:53:48 GetSingleValue result=40  Value=cccccccc
13:53:48 SkyScan query
13:53:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:53:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:53:48 Parameters OK
13:53:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:53:48 Set A/D data flow result=40
13:53:48 Set A/D channel type result=40
13:53:48 Set A/D encoding result=40
13:53:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:53:48 Set channel filter=0.000000e+000  result=40
13:53:48 Config A/D  Result=40
13:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:53:48 Get A/D filter: -9.255963e+061  result=40
13:53:48 Get A/D value=-858993460  result=40
13:53:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:53:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:53:48 Parameters OK
13:53:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:53:48 Set A/D data flow result=40
13:53:48 Set A/D channel type result=40
13:53:48 Set A/D encoding result=40
13:53:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:53:48 Set channel filter=0.000000e+000  result=40
13:53:48 Config A/D  Result=40
13:53:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:53:48 Get A/D filter: -9.255963e+061  result=40
13:53:48 Get A/D value=-858993460  result=40
13:53:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:53:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:53:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:53:48 Aux=
13:53:48 Message to Camera, serial 195712 queued
[UTC 2019-3-9  13:54:25]
13:54:25 Received message from Master: op=PointingHead serial=195725
13:54:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:54:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:54:25 Point started: ret=0
13:54:25 point_skyscan result=0
13:54:26 Check angles
13:54:26 SkyScan query
13:54:27 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:54:27 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:54:27 Message to Master queued w/err=0: serial=195725 error=0
13:54:32 Received message from Master: op=Filter serial=195726
13:54:32 Color wheel filter change from 0 to 0
13:54:32 FLIGetFilterPos err=0  currentPosition=0
13:54:32 FLIGetStepsRemaining err=0  RemainingSteps=0
13:54:32 Filter is already there-color wheel unchanged
13:54:32 Received message from Master: op=Shutter serial=195727
13:54:32 Shutter LASER close
13:54:32 Received message from Camera: op=State serial=195729
13:54:32 GetSingleValue result=40  Value=cccccccc
13:54:32 SkyScan query
13:54:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:54:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:54:33 Parameters OK
13:54:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:54:33 Set A/D data flow result=40
13:54:33 Set A/D channel type result=40
13:54:33 Set A/D encoding result=40
13:54:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:54:33 Set channel filter=0.000000e+000  result=40
13:54:33 Config A/D  Result=40
13:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:54:33 Get A/D filter: -9.255963e+061  result=40
13:54:33 Get A/D value=-858993460  result=40
13:54:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:54:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:54:33 Parameters OK
13:54:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:54:33 Set A/D data flow result=40
13:54:33 Set A/D channel type result=40
13:54:33 Set A/D encoding result=40
13:54:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:54:33 Set channel filter=0.000000e+000  result=40
13:54:33 Config A/D  Result=40
13:54:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:54:33 Get A/D filter: -9.255963e+061  result=40
13:54:33 Get A/D value=-858993460  result=40
13:54:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:54:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:54:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:54:33 Aux=
13:54:33 Message to Camera, serial 195729 queued
13:55:09 Received message from Master: op=PointingHead serial=195742
13:55:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:55:09 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:55:10 Point started: ret=0
13:55:10 point_skyscan result=0
13:55:10 Check angles
13:55:10 SkyScan query
13:55:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.43<-13562  Statuses=0008 0009
13:55:11 Msec=0  True Az=112.995  Ze=-23.43  Az status=0008  Ze status=0009
13:55:11 Check angles
13:55:11 SkyScan query
13:55:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.4<-14960  Statuses=0008 0009
13:55:12 Msec=750  True Az=112.995  Ze=-44.4  Az status=0008  Ze status=0009
13:55:12 Check angles
13:55:12 SkyScan query
13:55:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.34<-16356  Statuses=0008 0009
13:55:13 Msec=1500  True Az=112.995  Ze=-65.34  Az status=0008  Ze status=0009
13:55:13 Check angles
13:55:13 SkyScan query
13:55:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.31<-17754  Statuses=0008 0009
13:55:13 Msec=2250  True Az=112.995  Ze=-86.31  Az status=0008  Ze status=0009
13:55:13 Check angles
13:55:13 SkyScan query
13:55:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.265<-19151  Statuses=0008 0009
13:55:14 Msec=3000  True Az=112.995  Ze=-107.265  Az status=0008  Ze status=0009
13:55:14 Check angles
13:55:14 SkyScan query
13:55:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.205<-20547  Statuses=0008 0009
13:55:15 Msec=3750  True Az=112.995  Ze=-128.205  Az status=0008  Ze status=0009
13:55:15 Check angles
13:55:15 SkyScan query
13:55:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.16<-21944  Statuses=0008 0009
13:55:16 Msec=4500  True Az=112.995  Ze=-149.16  Az status=0008  Ze status=0009
13:55:16 Check angles
13:55:16 SkyScan query
13:55:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.115<-23341  Statuses=0008 0009
13:55:16 Msec=5250  True Az=112.995  Ze=-170.115  Az status=0008  Ze status=0009
13:55:16 Check angles
13:55:16 SkyScan query
13:55:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:55:17 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:55:17 Message to Master queued w/err=0: serial=195742 error=0
13:55:22 Received message from Master: op=Filter serial=195743
13:55:22 Color wheel filter change from 0 to 0
13:55:22 FLIGetFilterPos err=0  currentPosition=0
13:55:22 FLIGetStepsRemaining err=0  RemainingSteps=0
13:55:22 Filter is already there-color wheel unchanged
13:55:22 Received message from Master: op=Shutter serial=195744
13:55:22 Shutter LASER open
13:55:22 Received message from Camera: op=State serial=195746
13:55:22 GetSingleValue result=40  Value=cccccccc
13:55:22 SkyScan query
13:55:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:55:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:55:23 Parameters OK
13:55:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:55:23 Set A/D data flow result=40
13:55:23 Set A/D channel type result=40
13:55:23 Set A/D encoding result=40
13:55:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:55:23 Set channel filter=0.000000e+000  result=40
13:55:23 Config A/D  Result=40
13:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:55:23 Get A/D filter: -9.255963e+061  result=40
13:55:23 Get A/D value=-858993460  result=40
13:55:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:55:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:55:23 Parameters OK
13:55:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:55:23 Set A/D data flow result=40
13:55:23 Set A/D channel type result=40
13:55:23 Set A/D encoding result=40
13:55:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:55:23 Set channel filter=0.000000e+000  result=40
13:55:23 Config A/D  Result=40
13:55:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:55:23 Get A/D filter: -9.255963e+061  result=40
13:55:23 Get A/D value=-858993460  result=40
13:55:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:55:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:55:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:55:23 Aux=
13:55:23 Message to Camera, serial 195746 queued
13:55:31 Received message from Master: op=Shutter serial=195756
13:55:31 Shutter LASER close
13:55:32 Received message from Master: op=PointingHead serial=195760
13:55:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:55:32 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:55:32 Point started: ret=0
13:55:32 point_skyscan result=0
13:55:33 Check angles
13:55:33 SkyScan query
13:55:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.295<-21553  Statuses=0008 0009
13:55:34 Msec=0  True Az=112.995  Ze=-143.295  Az status=0008  Ze status=0009
13:55:34 Check angles
13:55:34 SkyScan query
13:55:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.355<-20157  Statuses=0008 0009
13:55:34 Msec=750  True Az=112.995  Ze=-122.355  Az status=0008  Ze status=0009
13:55:35 Check angles
13:55:35 SkyScan query
13:55:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.4<-18760  Statuses=0008 0009
13:55:35 Msec=1500  True Az=112.995  Ze=-101.4  Az status=0008  Ze status=0009
13:55:35 Check angles
13:55:35 SkyScan query
13:55:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.415<-17361  Statuses=0008 0009
13:55:36 Msec=2250  True Az=112.995  Ze=-80.415  Az status=0008  Ze status=0009
13:55:36 Check angles
13:55:36 SkyScan query
13:55:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.475<-15965  Statuses=0008 0009
13:55:37 Msec=3000  True Az=112.995  Ze=-59.475  Az status=0008  Ze status=0009
13:55:37 Check angles
13:55:37 SkyScan query
13:55:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.49<-14566  Statuses=0008 0009
13:55:37 Msec=3750  True Az=112.995  Ze=-38.49  Az status=0008  Ze status=0009
13:55:38 Check angles
13:55:38 SkyScan query
13:55:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.565<-13171  Statuses=0008 0009
13:55:38 Msec=4500  True Az=112.995  Ze=-17.565  Az status=0008  Ze status=0009
13:55:38 Check angles
13:55:38 SkyScan query
13:55:39 SkyScan query done: ret=0  az=112.995<-7533  ze=3.405<-11773  Statuses=0008 0009
13:55:39 Msec=5250  True Az=112.995  Ze=3.405  Az status=0008  Ze status=0009
13:55:39 Check angles
13:55:39 SkyScan query
13:55:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:55:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:55:40 Message to Master queued w/err=0: serial=195760 error=0
13:55:45 Received message from Master: op=Filter serial=195761
13:55:45 Color wheel filter change from 0 to 0
13:55:45 FLIGetFilterPos err=0  currentPosition=0
13:55:45 FLIGetStepsRemaining err=0  RemainingSteps=0
13:55:45 Filter is already there-color wheel unchanged
13:55:45 Received message from Master: op=Shutter serial=195762
13:55:45 Shutter LASER close
13:55:45 Received message from Camera: op=State serial=195764
13:55:45 GetSingleValue result=40  Value=cccccccc
13:55:45 SkyScan query
13:55:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:55:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:55:46 Parameters OK
13:55:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:55:46 Set A/D data flow result=40
13:55:46 Set A/D channel type result=40
13:55:46 Set A/D encoding result=40
13:55:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:55:46 Set channel filter=0.000000e+000  result=40
13:55:46 Config A/D  Result=40
13:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:55:46 Get A/D filter: -9.255963e+061  result=40
13:55:46 Get A/D value=-858993460  result=40
13:55:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:55:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:55:46 Parameters OK
13:55:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:55:46 Set A/D data flow result=40
13:55:46 Set A/D channel type result=40
13:55:46 Set A/D encoding result=40
13:55:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:55:46 Set channel filter=0.000000e+000  result=40
13:55:46 Config A/D  Result=40
13:55:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:55:46 Get A/D filter: -9.255963e+061  result=40
13:55:46 Get A/D value=-858993460  result=40
13:55:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:55:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:55:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:55:46 Aux=
13:55:46 Message to Camera, serial 195764 queued
13:56:22 Received message from Master: op=PointingHead serial=195777
13:56:22 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:56:22 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:56:23 Point started: ret=0
13:56:23 point_skyscan result=0
13:56:24 Check angles
13:56:24 SkyScan query
13:56:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:56:24 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:56:24 Message to Master queued w/err=0: serial=195777 error=0
13:56:29 Received message from Master: op=Filter serial=195778
13:56:29 Color wheel filter change from 0 to 0
13:56:29 FLIGetFilterPos err=0  currentPosition=0
13:56:29 FLIGetStepsRemaining err=0  RemainingSteps=0
13:56:29 Filter is already there-color wheel unchanged
13:56:29 Received message from Master: op=Shutter serial=195779
13:56:29 Shutter LASER close
13:56:29 Received message from Camera: op=State serial=195781
13:56:29 GetSingleValue result=40  Value=cccccccc
13:56:29 SkyScan query
13:56:30 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:56:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:56:30 Parameters OK
13:56:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:56:30 Set A/D data flow result=40
13:56:30 Set A/D channel type result=40
13:56:30 Set A/D encoding result=40
13:56:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:56:30 Set channel filter=0.000000e+000  result=40
13:56:30 Config A/D  Result=40
13:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:56:30 Get A/D filter: -9.255963e+061  result=40
13:56:30 Get A/D value=-858993460  result=40
13:56:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:56:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:56:30 Parameters OK
13:56:30 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:56:30 Set A/D data flow result=40
13:56:30 Set A/D channel type result=40
13:56:30 Set A/D encoding result=40
13:56:30 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:56:30 Set channel filter=0.000000e+000  result=40
13:56:30 Config A/D  Result=40
13:56:30 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:56:30 Get A/D filter: -9.255963e+061  result=40
13:56:30 Get A/D value=-858993460  result=40
13:56:30 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:56:30 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:56:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:56:30 Aux=
13:56:30 Message to Camera, serial 195781 queued
13:57:07 Received message from Master: op=PointingHead serial=195794
13:57:07 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
13:57:07 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
13:57:07 Point started: ret=0
13:57:07 point_skyscan result=0
13:57:08 Check angles
13:57:08 SkyScan query
13:57:08 SkyScan query done: ret=0  az=135.975<-9065  ze=-6.51<-12434  Statuses=0009 0008
13:57:08 Msec=0  True Az=135.975  Ze=-6.51  Az status=0009  Ze status=0008
13:57:09 Check angles
13:57:09 SkyScan query
13:57:09 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
13:57:09 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
13:57:09 Check angles
13:57:09 SkyScan query
13:57:10 SkyScan query done: ret=0  az=171.3<-11420  ze=-6.495<-12433  Statuses=0009 0008
13:57:10 Msec=1500  True Az=171.3  Ze=-6.495  Az status=0009  Ze status=0008
13:57:10 Check angles
13:57:10 SkyScan query
13:57:11 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:57:11 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
13:57:11 Message to Master queued w/err=0: serial=195794 error=0
13:57:16 Received message from Master: op=Filter serial=195795
13:57:16 Color wheel filter change from 0 to 0
13:57:16 FLIGetFilterPos err=0  currentPosition=0
13:57:16 FLIGetStepsRemaining err=0  RemainingSteps=0
13:57:16 Filter is already there-color wheel unchanged
13:57:16 Received message from Master: op=Shutter serial=195796
13:57:16 Shutter LASER close
13:57:16 Received message from Camera: op=State serial=195798
13:57:16 GetSingleValue result=40  Value=cccccccc
13:57:16 SkyScan query
13:57:17 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
13:57:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:57:17 Parameters OK
13:57:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:57:17 Set A/D data flow result=40
13:57:17 Set A/D channel type result=40
13:57:17 Set A/D encoding result=40
13:57:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:57:17 Set channel filter=0.000000e+000  result=40
13:57:17 Config A/D  Result=40
13:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:57:17 Get A/D filter: -9.255963e+061  result=40
13:57:17 Get A/D value=-858993460  result=40
13:57:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:57:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:57:17 Parameters OK
13:57:17 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:57:17 Set A/D data flow result=40
13:57:17 Set A/D channel type result=40
13:57:17 Set A/D encoding result=40
13:57:17 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:57:17 Set channel filter=0.000000e+000  result=40
13:57:17 Config A/D  Result=40
13:57:17 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:57:17 Get A/D filter: -9.255963e+061  result=40
13:57:17 Get A/D value=-858993460  result=40
13:57:17 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:57:17 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:57:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:57:17 Aux=
13:57:17 Message to Camera, serial 195798 queued
13:57:53 Received message from Master: op=PointingHead serial=195811
13:57:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:57:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:57:54 Point started: ret=0
13:57:54 point_skyscan result=0
13:57:54 Check angles
13:57:54 SkyScan query
13:57:55 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
13:57:55 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
13:57:55 Check angles
13:57:55 SkyScan query
13:57:56 SkyScan query done: ret=0  az=134.955<-8997  ze=6.495<-11567  Statuses=0009 0008
13:57:56 Msec=750  True Az=134.955  Ze=6.495  Az status=0009  Ze status=0008
13:57:56 Check angles
13:57:56 SkyScan query
13:57:57 SkyScan query done: ret=0  az=117.105<-7807  ze=6.495<-11567  Statuses=0009 0008
13:57:57 Msec=1500  True Az=117.105  Ze=6.495  Az status=0009  Ze status=0008
13:57:57 Check angles
13:57:57 SkyScan query
13:57:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:57:57 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:57:57 Message to Master queued w/err=0: serial=195811 error=0
13:58:02 Received message from Master: op=Filter serial=195812
13:58:02 Color wheel filter change from 0 to 0
13:58:02 FLIGetFilterPos err=0  currentPosition=0
13:58:02 FLIGetStepsRemaining err=0  RemainingSteps=0
13:58:02 Filter is already there-color wheel unchanged
13:58:03 Received message from Master: op=Shutter serial=195813
13:58:03 Shutter LASER close
13:58:03 Received message from Camera: op=State serial=195815
13:58:03 GetSingleValue result=40  Value=cccccccc
13:58:03 SkyScan query
13:58:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:58:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:58:03 Parameters OK
13:58:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:58:03 Set A/D data flow result=40
13:58:03 Set A/D channel type result=40
13:58:03 Set A/D encoding result=40
13:58:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:58:03 Set channel filter=0.000000e+000  result=40
13:58:03 Config A/D  Result=40
13:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:58:03 Get A/D filter: -9.255963e+061  result=40
13:58:03 Get A/D value=-858993460  result=40
13:58:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:58:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:58:03 Parameters OK
13:58:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:58:03 Set A/D data flow result=40
13:58:03 Set A/D channel type result=40
13:58:03 Set A/D encoding result=40
13:58:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:58:03 Set channel filter=0.000000e+000  result=40
13:58:03 Config A/D  Result=40
13:58:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:58:03 Get A/D filter: -9.255963e+061  result=40
13:58:03 Get A/D value=-858993460  result=40
13:58:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:58:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:58:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:58:03 Aux=
13:58:03 Message to Camera, serial 195815 queued
13:58:40 Received message from Master: op=PointingHead serial=195828
13:58:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
13:58:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
13:58:40 Point started: ret=0
13:58:40 point_skyscan result=0
13:58:41 Check angles
13:58:41 SkyScan query
13:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.22<-13548  Statuses=0008 0009
13:58:42 Msec=0  True Az=112.995  Ze=-23.22  Az status=0008  Ze status=0009
13:58:42 Check angles
13:58:42 SkyScan query
13:58:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.655<-14977  Statuses=0008 0009
13:58:42 Msec=750  True Az=112.995  Ze=-44.655  Az status=0008  Ze status=0009
13:58:43 Check angles
13:58:43 SkyScan query
13:58:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.595<-16373  Statuses=0008 0009
13:58:43 Msec=1500  True Az=112.995  Ze=-65.595  Az status=0008  Ze status=0009
13:58:43 Check angles
13:58:43 SkyScan query
13:58:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.535<-17769  Statuses=0008 0009
13:58:44 Msec=2250  True Az=112.995  Ze=-86.535  Az status=0008  Ze status=0009
13:58:44 Check angles
13:58:44 SkyScan query
13:58:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.925<-19195  Statuses=0008 0009
13:58:45 Msec=3000  True Az=112.995  Ze=-107.925  Az status=0008  Ze status=0009
13:58:45 Check angles
13:58:45 SkyScan query
13:58:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.865<-20591  Statuses=0008 0009
13:58:45 Msec=3750  True Az=112.995  Ze=-128.865  Az status=0008  Ze status=0009
13:58:46 Check angles
13:58:46 SkyScan query
13:58:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.835<-21989  Statuses=0008 0009
13:58:46 Msec=4500  True Az=112.995  Ze=-149.835  Az status=0008  Ze status=0009
13:58:46 Check angles
13:58:46 SkyScan query
13:58:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.075<-23405  Statuses=0008 0009
13:58:47 Msec=5250  True Az=112.995  Ze=-171.075  Az status=0008  Ze status=0009
13:58:47 Check angles
13:58:47 SkyScan query
13:58:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
13:58:48 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
13:58:48 Message to Master queued w/err=0: serial=195828 error=0
13:58:53 Received message from Master: op=Filter serial=195829
13:58:53 Color wheel filter change from 0 to 0
13:58:53 FLIGetFilterPos err=0  currentPosition=0
13:58:53 FLIGetStepsRemaining err=0  RemainingSteps=0
13:58:53 Filter is already there-color wheel unchanged
13:58:53 Received message from Master: op=Shutter serial=195830
13:58:53 Shutter LASER open
13:58:53 Received message from Camera: op=State serial=195832
13:58:53 GetSingleValue result=40  Value=cccccccc
13:58:53 SkyScan query
13:58:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
13:58:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:58:54 Parameters OK
13:58:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:58:54 Set A/D data flow result=40
13:58:54 Set A/D channel type result=40
13:58:54 Set A/D encoding result=40
13:58:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:58:54 Set channel filter=0.000000e+000  result=40
13:58:54 Config A/D  Result=40
13:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:58:54 Get A/D filter: -9.255963e+061  result=40
13:58:54 Get A/D value=-858993460  result=40
13:58:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:58:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:58:54 Parameters OK
13:58:54 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:58:54 Set A/D data flow result=40
13:58:54 Set A/D channel type result=40
13:58:54 Set A/D encoding result=40
13:58:54 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:58:54 Set channel filter=0.000000e+000  result=40
13:58:54 Config A/D  Result=40
13:58:54 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:58:54 Get A/D filter: -9.255963e+061  result=40
13:58:54 Get A/D value=-858993460  result=40
13:58:54 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:58:54 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:58:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:58:54 Aux=
13:58:54 Message to Camera, serial 195832 queued
13:59:02 Received message from Master: op=Shutter serial=195842
13:59:02 Shutter LASER close
13:59:02 Received message from Master: op=PointingHead serial=195846
13:59:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:59:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:59:03 Point started: ret=0
13:59:03 point_skyscan result=0
13:59:04 Check angles
13:59:04 SkyScan query
13:59:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.995<-21533  Statuses=0008 0009
13:59:04 Msec=0  True Az=112.995  Ze=-142.995  Az status=0008  Ze status=0009
13:59:04 Check angles
13:59:04 SkyScan query
13:59:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.59<-20106  Statuses=0008 0009
13:59:05 Msec=750  True Az=112.995  Ze=-121.59  Az status=0008  Ze status=0009
13:59:05 Check angles
13:59:05 SkyScan query
13:59:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.665<-18711  Statuses=0008 0009
13:59:06 Msec=1500  True Az=112.995  Ze=-100.665  Az status=0008  Ze status=0009
13:59:06 Check angles
13:59:06 SkyScan query
13:59:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.695<-17313  Statuses=0008 0009
13:59:06 Msec=2250  True Az=112.995  Ze=-79.695  Az status=0008  Ze status=0009
13:59:07 Check angles
13:59:07 SkyScan query
13:59:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.29<-15886  Statuses=0008 0009
13:59:07 Msec=3000  True Az=112.995  Ze=-58.29  Az status=0008  Ze status=0009
13:59:07 Check angles
13:59:07 SkyScan query
13:59:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.365<-14491  Statuses=0008 0009
13:59:08 Msec=3750  True Az=112.995  Ze=-37.365  Az status=0008  Ze status=0009
13:59:08 Check angles
13:59:08 SkyScan query
13:59:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.38<-13092  Statuses=0008 0009
13:59:09 Msec=4500  True Az=112.995  Ze=-16.38  Az status=0008  Ze status=0009
13:59:09 Check angles
13:59:09 SkyScan query
13:59:09 SkyScan query done: ret=0  az=112.995<-7533  ze=4.455<-11703  Statuses=0008 0009
13:59:09 Msec=5250  True Az=112.995  Ze=4.455  Az status=0008  Ze status=0009
13:59:10 Check angles
13:59:10 SkyScan query
13:59:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
13:59:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
13:59:10 Message to Master queued w/err=0: serial=195846 error=0
13:59:15 Received message from Master: op=Filter serial=195847
13:59:15 Color wheel filter change from 0 to 0
13:59:15 FLIGetFilterPos err=0  currentPosition=0
13:59:15 FLIGetStepsRemaining err=0  RemainingSteps=0
13:59:15 Filter is already there-color wheel unchanged
13:59:15 Received message from Master: op=Shutter serial=195848
13:59:15 Shutter LASER close
13:59:16 Received message from Camera: op=State serial=195850
13:59:16 GetSingleValue result=40  Value=cccccccc
13:59:16 SkyScan query
13:59:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:59:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:59:16 Parameters OK
13:59:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:59:16 Set A/D data flow result=40
13:59:16 Set A/D channel type result=40
13:59:16 Set A/D encoding result=40
13:59:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:59:16 Set channel filter=0.000000e+000  result=40
13:59:16 Config A/D  Result=40
13:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:59:16 Get A/D filter: -9.255963e+061  result=40
13:59:16 Get A/D value=-858993460  result=40
13:59:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:59:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
13:59:16 Parameters OK
13:59:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
13:59:16 Set A/D data flow result=40
13:59:16 Set A/D channel type result=40
13:59:16 Set A/D encoding result=40
13:59:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
13:59:16 Set channel filter=0.000000e+000  result=40
13:59:16 Config A/D  Result=40
13:59:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
13:59:16 Get A/D filter: -9.255963e+061  result=40
13:59:16 Get A/D value=-858993460  result=40
13:59:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
13:59:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
13:59:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
13:59:16 Aux=
13:59:16 Message to Camera, serial 195850 queued
13:59:53 Received message from Master: op=PointingHead serial=195863
13:59:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
13:59:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
13:59:53 Point started: ret=0
13:59:53 point_skyscan result=0
13:59:54 Check angles
13:59:54 SkyScan query
13:59:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
13:59:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
13:59:55 Message to Master queued w/err=0: serial=195863 error=0
14:00:00 Received message from Master: op=Filter serial=195864
14:00:00 Color wheel filter change from 0 to 0
14:00:00 FLIGetFilterPos err=0  currentPosition=0
14:00:00 FLIGetStepsRemaining err=0  RemainingSteps=0
14:00:00 Filter is already there-color wheel unchanged
14:00:00 Received message from Master: op=Shutter serial=195865
14:00:00 Shutter LASER close
14:00:00 Received message from Camera: op=State serial=195867
14:00:00 GetSingleValue result=40  Value=cccccccc
14:00:00 SkyScan query
14:00:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:00:00 Parameters OK
14:00:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:00:00 Set A/D data flow result=40
14:00:00 Set A/D channel type result=40
14:00:00 Set A/D encoding result=40
14:00:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:00:00 Set channel filter=0.000000e+000  result=40
14:00:00 Config A/D  Result=40
14:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:00:00 Get A/D filter: -9.255963e+061  result=40
14:00:00 Get A/D value=-858993460  result=40
14:00:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:00:00 Parameters OK
14:00:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:00:00 Set A/D data flow result=40
14:00:00 Set A/D channel type result=40
14:00:00 Set A/D encoding result=40
14:00:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:00:00 Set channel filter=0.000000e+000  result=40
14:00:00 Config A/D  Result=40
14:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:00:00 Get A/D filter: -9.255963e+061  result=40
14:00:00 Get A/D value=-858993460  result=40
14:00:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:00:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:00:00 Aux=
14:00:00 Message to Camera, serial 195867 queued
14:00:37 Received message from Master: op=PointingHead serial=195880
14:00:37 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:00:37 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:00:38 Point started: ret=0
14:00:38 point_skyscan result=0
14:00:38 Check angles
14:00:38 SkyScan query
14:00:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:00:39 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:00:39 Message to Master queued w/err=0: serial=195880 error=0
14:00:44 Received message from Master: op=Filter serial=195881
14:00:44 Color wheel filter change from 0 to 0
14:00:44 FLIGetFilterPos err=0  currentPosition=0
14:00:44 FLIGetStepsRemaining err=0  RemainingSteps=0
14:00:44 Filter is already there-color wheel unchanged
14:00:44 Received message from Master: op=Shutter serial=195882
14:00:44 Shutter LASER close
14:00:44 Received message from Camera: op=State serial=195884
14:00:44 GetSingleValue result=40  Value=cccccccc
14:00:44 SkyScan query
14:00:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:00:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:00:45 Parameters OK
14:00:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:00:45 Set A/D data flow result=40
14:00:45 Set A/D channel type result=40
14:00:45 Set A/D encoding result=40
14:00:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:00:45 Set channel filter=0.000000e+000  result=40
14:00:45 Config A/D  Result=40
14:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:00:45 Get A/D filter: -9.255963e+061  result=40
14:00:45 Get A/D value=-858993460  result=40
14:00:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:00:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:00:45 Parameters OK
14:00:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:00:45 Set A/D data flow result=40
14:00:45 Set A/D channel type result=40
14:00:45 Set A/D encoding result=40
14:00:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:00:45 Set channel filter=0.000000e+000  result=40
14:00:45 Config A/D  Result=40
14:00:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:00:45 Get A/D filter: -9.255963e+061  result=40
14:00:45 Get A/D value=-858993460  result=40
14:00:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:00:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:00:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:00:45 Aux=
14:00:45 Message to Camera, serial 195884 queued
14:01:21 Received message from Master: op=PointingHead serial=195897
14:01:21 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:01:21 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:01:22 Point started: ret=0
14:01:22 point_skyscan result=0
14:01:23 Check angles
14:01:23 SkyScan query
14:01:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:01:23 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:01:23 Message to Master queued w/err=0: serial=195897 error=0
14:01:28 Received message from Master: op=Filter serial=195898
14:01:28 Color wheel filter change from 0 to 0
14:01:28 FLIGetFilterPos err=0  currentPosition=0
14:01:28 FLIGetStepsRemaining err=0  RemainingSteps=0
14:01:28 Filter is already there-color wheel unchanged
14:01:28 Received message from Master: op=Shutter serial=195899
14:01:28 Shutter LASER close
14:01:28 Received message from Camera: op=State serial=195901
14:01:28 GetSingleValue result=40  Value=cccccccc
14:01:28 SkyScan query
14:01:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:01:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:01:29 Parameters OK
14:01:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:01:29 Set A/D data flow result=40
14:01:29 Set A/D channel type result=40
14:01:29 Set A/D encoding result=40
14:01:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:01:29 Set channel filter=0.000000e+000  result=40
14:01:29 Config A/D  Result=40
14:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:01:29 Get A/D filter: -9.255963e+061  result=40
14:01:29 Get A/D value=-858993460  result=40
14:01:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:01:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:01:29 Parameters OK
14:01:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:01:29 Set A/D data flow result=40
14:01:29 Set A/D channel type result=40
14:01:29 Set A/D encoding result=40
14:01:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:01:29 Set channel filter=0.000000e+000  result=40
14:01:29 Config A/D  Result=40
14:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:01:29 Get A/D filter: -9.255963e+061  result=40
14:01:29 Get A/D value=-858993460  result=40
14:01:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:01:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:01:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:01:29 Aux=
14:01:29 Message to Camera, serial 195901 queued
14:02:06 Received message from Master: op=PointingHead serial=195914
14:02:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:02:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:02:06 Point started: ret=0
14:02:06 point_skyscan result=0
14:02:07 Check angles
14:02:07 SkyScan query
14:02:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
14:02:08 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
14:02:08 Check angles
14:02:08 SkyScan query
14:02:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.46<-14964  Statuses=0008 0009
14:02:08 Msec=750  True Az=112.995  Ze=-44.46  Az status=0008  Ze status=0009
14:02:08 Check angles
14:02:08 SkyScan query
14:02:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.835<-16389  Statuses=0008 0009
14:02:09 Msec=1500  True Az=112.995  Ze=-65.835  Az status=0008  Ze status=0009
14:02:09 Check angles
14:02:09 SkyScan query
14:02:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.79<-17786  Statuses=0008 0009
14:02:10 Msec=2250  True Az=112.995  Ze=-86.79  Az status=0008  Ze status=0009
14:02:10 Check angles
14:02:10 SkyScan query
14:02:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.745<-19183  Statuses=0008 0009
14:02:11 Msec=3000  True Az=112.995  Ze=-107.745  Az status=0008  Ze status=0009
14:02:11 Check angles
14:02:11 SkyScan query
14:02:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.685<-20579  Statuses=0008 0009
14:02:11 Msec=3750  True Az=112.995  Ze=-128.685  Az status=0008  Ze status=0009
14:02:11 Check angles
14:02:11 SkyScan query
14:02:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.655<-21977  Statuses=0008 0009
14:02:12 Msec=4500  True Az=112.995  Ze=-149.655  Az status=0008  Ze status=0009
14:02:12 Check angles
14:02:12 SkyScan query
14:02:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.58<-23372  Statuses=0008 0009
14:02:13 Msec=5250  True Az=112.995  Ze=-170.58  Az status=0008  Ze status=0009
14:02:13 Check angles
14:02:13 SkyScan query
14:02:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:02:14 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:02:14 Message to Master queued w/err=0: serial=195914 error=0
14:02:19 Received message from Master: op=Filter serial=195915
14:02:19 Color wheel filter change from 0 to 0
14:02:19 FLIGetFilterPos err=0  currentPosition=0
14:02:19 FLIGetStepsRemaining err=0  RemainingSteps=0
14:02:19 Filter is already there-color wheel unchanged
14:02:19 Received message from Master: op=Shutter serial=195916
14:02:19 Shutter LASER open
14:02:19 Received message from Camera: op=State serial=195918
14:02:19 GetSingleValue result=40  Value=cccccccc
14:02:19 SkyScan query
14:02:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:02:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:02:19 Parameters OK
14:02:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:02:19 Set A/D data flow result=40
14:02:19 Set A/D channel type result=40
14:02:19 Set A/D encoding result=40
14:02:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:02:19 Set channel filter=0.000000e+000  result=40
14:02:19 Config A/D  Result=40
14:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:02:19 Get A/D filter: -9.255963e+061  result=40
14:02:19 Get A/D value=-858993460  result=40
14:02:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:02:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:02:19 Parameters OK
14:02:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:02:19 Set A/D data flow result=40
14:02:19 Set A/D channel type result=40
14:02:19 Set A/D encoding result=40
14:02:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:02:19 Set channel filter=0.000000e+000  result=40
14:02:19 Config A/D  Result=40
14:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:02:19 Get A/D filter: -9.255963e+061  result=40
14:02:19 Get A/D value=-858993460  result=40
14:02:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:02:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:02:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:02:19 Aux=
14:02:19 Message to Camera, serial 195918 queued
14:02:28 Received message from Master: op=Shutter serial=195928
14:02:28 Shutter LASER close
14:02:28 Received message from Master: op=PointingHead serial=195932
14:02:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:02:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:02:29 Point started: ret=0
14:02:29 point_skyscan result=0
14:02:30 Check angles
14:02:30 SkyScan query
14:02:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.07<-21538  Statuses=0008 0009
14:02:30 Msec=0  True Az=112.995  Ze=-143.07  Az status=0008  Ze status=0009
14:02:30 Check angles
14:02:30 SkyScan query
14:02:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.115<-20141  Statuses=0008 0009
14:02:31 Msec=750  True Az=112.995  Ze=-122.115  Az status=0008  Ze status=0009
14:02:31 Check angles
14:02:31 SkyScan query
14:02:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.175<-18745  Statuses=0008 0009
14:02:32 Msec=1500  True Az=112.995  Ze=-101.175  Az status=0008  Ze status=0009
14:02:32 Check angles
14:02:32 SkyScan query
14:02:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.205<-17347  Statuses=0008 0009
14:02:32 Msec=2250  True Az=112.995  Ze=-80.205  Az status=0008  Ze status=0009
14:02:33 Check angles
14:02:33 SkyScan query
14:02:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.28<-15952  Statuses=0008 0009
14:02:33 Msec=3000  True Az=112.995  Ze=-59.28  Az status=0008  Ze status=0009
14:02:33 Check angles
14:02:33 SkyScan query
14:02:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.28<-14552  Statuses=0008 0009
14:02:34 Msec=3750  True Az=112.995  Ze=-38.28  Az status=0008  Ze status=0009
14:02:34 Check angles
14:02:34 SkyScan query
14:02:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.355<-13157  Statuses=0008 0009
14:02:35 Msec=4500  True Az=112.995  Ze=-17.355  Az status=0008  Ze status=0009
14:02:35 Check angles
14:02:35 SkyScan query
14:02:35 SkyScan query done: ret=0  az=112.995<-7533  ze=3.615<-11759  Statuses=0008 0009
14:02:35 Msec=5250  True Az=112.995  Ze=3.615  Az status=0008  Ze status=0009
14:02:36 Check angles
14:02:36 SkyScan query
14:02:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:02:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:02:36 Message to Master queued w/err=0: serial=195932 error=0
14:02:41 Received message from Master: op=Filter serial=195933
14:02:41 Color wheel filter change from 0 to 0
14:02:41 FLIGetFilterPos err=0  currentPosition=0
14:02:41 FLIGetStepsRemaining err=0  RemainingSteps=0
14:02:41 Filter is already there-color wheel unchanged
14:02:41 Received message from Master: op=Shutter serial=195934
14:02:41 Shutter LASER close
14:02:41 Received message from Camera: op=State serial=195936
14:02:41 GetSingleValue result=40  Value=cccccccc
14:02:41 SkyScan query
14:02:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:02:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:02:42 Parameters OK
14:02:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:02:42 Set A/D data flow result=40
14:02:42 Set A/D channel type result=40
14:02:42 Set A/D encoding result=40
14:02:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:02:42 Set channel filter=0.000000e+000  result=40
14:02:42 Config A/D  Result=40
14:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:02:42 Get A/D filter: -9.255963e+061  result=40
14:02:42 Get A/D value=-858993460  result=40
14:02:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:02:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:02:42 Parameters OK
14:02:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:02:42 Set A/D data flow result=40
14:02:42 Set A/D channel type result=40
14:02:42 Set A/D encoding result=40
14:02:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:02:42 Set channel filter=0.000000e+000  result=40
14:02:42 Config A/D  Result=40
14:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:02:42 Get A/D filter: -9.255963e+061  result=40
14:02:42 Get A/D value=-858993460  result=40
14:02:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:02:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:02:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:02:42 Aux=
14:02:42 Message to Camera, serial 195936 queued
14:03:19 Received message from Master: op=PointingHead serial=195949
14:03:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:03:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:03:19 Point started: ret=0
14:03:19 point_skyscan result=0
14:03:20 Check angles
14:03:20 SkyScan query
14:03:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:03:21 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:03:21 Message to Master queued w/err=0: serial=195949 error=0
14:03:26 Received message from Master: op=Filter serial=195950
14:03:26 Color wheel filter change from 0 to 0
14:03:26 FLIGetFilterPos err=0  currentPosition=0
14:03:26 FLIGetStepsRemaining err=0  RemainingSteps=0
14:03:26 Filter is already there-color wheel unchanged
14:03:26 Received message from Master: op=Shutter serial=195951
14:03:26 Shutter LASER close
14:03:26 Received message from Camera: op=State serial=195953
14:03:26 GetSingleValue result=40  Value=cccccccc
14:03:26 SkyScan query
14:03:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:03:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:03:26 Parameters OK
14:03:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:03:26 Set A/D data flow result=40
14:03:26 Set A/D channel type result=40
14:03:26 Set A/D encoding result=40
14:03:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:03:26 Set channel filter=0.000000e+000  result=40
14:03:26 Config A/D  Result=40
14:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:03:26 Get A/D filter: -9.255963e+061  result=40
14:03:26 Get A/D value=-858993460  result=40
14:03:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:03:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:03:26 Parameters OK
14:03:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:03:26 Set A/D data flow result=40
14:03:26 Set A/D channel type result=40
14:03:26 Set A/D encoding result=40
14:03:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:03:26 Set channel filter=0.000000e+000  result=40
14:03:26 Config A/D  Result=40
14:03:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:03:26 Get A/D filter: -9.255963e+061  result=40
14:03:26 Get A/D value=-858993460  result=40
14:03:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:03:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:03:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:03:26 Aux=
14:03:26 Message to Camera, serial 195953 queued
14:03:36 Received message from Master: op=Identify serial=195954
[UTC 2019-3-9  14:03:48]
14:04:03 Received message from Master: op=PointingHead serial=195969
14:04:03 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:04:03 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:04:04 Point started: ret=0
14:04:04 point_skyscan result=0
14:04:04 Check angles
14:04:04 SkyScan query
14:04:05 SkyScan query done: ret=0  az=136.425<-9095  ze=-6.51<-12434  Statuses=0009 0008
14:04:05 Msec=0  True Az=136.425  Ze=-6.51  Az status=0009  Ze status=0008
14:04:05 Check angles
14:04:05 SkyScan query
14:04:06 SkyScan query done: ret=0  az=153.885<-10259  ze=-6.495<-12433  Statuses=0009 0008
14:04:06 Msec=750  True Az=153.885  Ze=-6.495  Az status=0009  Ze status=0008
14:04:06 Check angles
14:04:06 SkyScan query
14:04:06 SkyScan query done: ret=0  az=171.285<-11419  ze=-6.495<-12433  Statuses=0009 0008
14:04:06 Msec=1500  True Az=171.285  Ze=-6.495  Az status=0009  Ze status=0008
14:04:07 Check angles
14:04:07 SkyScan query
14:04:07 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:04:07 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:04:07 Message to Master queued w/err=0: serial=195969 error=0
14:04:12 Received message from Master: op=Filter serial=195970
14:04:12 Color wheel filter change from 0 to 0
14:04:12 FLIGetFilterPos err=0  currentPosition=0
14:04:12 FLIGetStepsRemaining err=0  RemainingSteps=0
14:04:12 Filter is already there-color wheel unchanged
14:04:12 Received message from Master: op=Shutter serial=195971
14:04:12 Shutter LASER close
14:04:12 Received message from Camera: op=State serial=195973
14:04:12 GetSingleValue result=40  Value=cccccccc
14:04:12 SkyScan query
14:04:13 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:04:13 Parameters OK
14:04:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:04:13 Set A/D data flow result=40
14:04:13 Set A/D channel type result=40
14:04:13 Set A/D encoding result=40
14:04:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:04:13 Set channel filter=0.000000e+000  result=40
14:04:13 Config A/D  Result=40
14:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:04:13 Get A/D filter: -9.255963e+061  result=40
14:04:13 Get A/D value=-858993460  result=40
14:04:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:04:13 Parameters OK
14:04:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:04:13 Set A/D data flow result=40
14:04:13 Set A/D channel type result=40
14:04:13 Set A/D encoding result=40
14:04:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:04:13 Set channel filter=0.000000e+000  result=40
14:04:13 Config A/D  Result=40
14:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:04:13 Get A/D filter: -9.255963e+061  result=40
14:04:13 Get A/D value=-858993460  result=40
14:04:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:04:13 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:04:13 Aux=
14:04:13 Message to Camera, serial 195973 queued
14:04:50 Received message from Master: op=PointingHead serial=195986
14:04:50 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:04:50 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:04:50 Point started: ret=0
14:04:50 point_skyscan result=0
14:04:51 Check angles
14:04:51 SkyScan query
14:04:51 SkyScan query done: ret=0  az=153.075<-10205  ze=6.51<-11566  Statuses=0009 0008
14:04:51 Msec=0  True Az=153.075  Ze=6.51  Az status=0009  Ze status=0008
14:04:52 Check angles
14:04:52 SkyScan query
14:04:52 SkyScan query done: ret=0  az=135.645<-9043  ze=6.495<-11567  Statuses=0009 0008
14:04:52 Msec=750  True Az=135.645  Ze=6.495  Az status=0009  Ze status=0008
14:04:52 Check angles
14:04:52 SkyScan query
14:04:53 SkyScan query done: ret=0  az=118.155<-7877  ze=6.495<-11567  Statuses=0009 0008
14:04:53 Msec=1500  True Az=118.155  Ze=6.495  Az status=0009  Ze status=0008
14:04:53 Check angles
14:04:53 SkyScan query
14:04:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:04:54 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:04:54 Message to Master queued w/err=0: serial=195986 error=0
14:04:59 Received message from Master: op=Filter serial=195987
14:04:59 Color wheel filter change from 0 to 0
14:04:59 FLIGetFilterPos err=0  currentPosition=0
14:04:59 FLIGetStepsRemaining err=0  RemainingSteps=0
14:04:59 Filter is already there-color wheel unchanged
14:04:59 Received message from Master: op=Shutter serial=195988
14:04:59 Shutter LASER close
14:04:59 Received message from Camera: op=State serial=195990
14:04:59 GetSingleValue result=40  Value=cccccccc
14:04:59 SkyScan query
14:04:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:04:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:04:59 Parameters OK
14:04:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:04:59 Set A/D data flow result=40
14:04:59 Set A/D channel type result=40
14:04:59 Set A/D encoding result=40
14:04:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:04:59 Set channel filter=0.000000e+000  result=40
14:04:59 Config A/D  Result=40
14:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:04:59 Get A/D filter: -9.255963e+061  result=40
14:04:59 Get A/D value=-858993460  result=40
14:04:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:04:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:04:59 Parameters OK
14:04:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:04:59 Set A/D data flow result=40
14:04:59 Set A/D channel type result=40
14:04:59 Set A/D encoding result=40
14:04:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:04:59 Set channel filter=0.000000e+000  result=40
14:04:59 Config A/D  Result=40
14:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:04:59 Get A/D filter: -9.255963e+061  result=40
14:04:59 Get A/D value=-858993460  result=40
14:04:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:04:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:04:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:04:59 Aux=
14:04:59 Message to Camera, serial 195990 queued
14:05:36 Received message from Master: op=PointingHead serial=196003
14:05:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:05:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:05:37 Point started: ret=0
14:05:37 point_skyscan result=0
14:05:37 Check angles
14:05:37 SkyScan query
14:05:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
14:05:38 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
14:05:38 Check angles
14:05:38 SkyScan query
14:05:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
14:05:39 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
14:05:39 Check angles
14:05:39 SkyScan query
14:05:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.82<-16388  Statuses=0008 0009
14:05:40 Msec=1500  True Az=112.995  Ze=-65.82  Az status=0008  Ze status=0009
14:05:40 Check angles
14:05:40 SkyScan query
14:05:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.745<-17783  Statuses=0008 0009
14:05:40 Msec=2250  True Az=112.995  Ze=-86.745  Az status=0008  Ze status=0009
14:05:40 Check angles
14:05:40 SkyScan query
14:05:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.715<-19181  Statuses=0008 0009
14:05:41 Msec=3000  True Az=112.995  Ze=-107.715  Az status=0008  Ze status=0009
14:05:41 Check angles
14:05:41 SkyScan query
14:05:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.09<-20606  Statuses=0008 0009
14:05:42 Msec=3750  True Az=112.995  Ze=-129.09  Az status=0008  Ze status=0009
14:05:42 Check angles
14:05:42 SkyScan query
14:05:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.06<-22004  Statuses=0008 0009
14:05:43 Msec=4500  True Az=112.995  Ze=-150.06  Az status=0008  Ze status=0009
14:05:43 Check angles
14:05:43 SkyScan query
14:05:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.91<-23394  Statuses=0008 0009
14:05:43 Msec=5250  True Az=112.995  Ze=-170.91  Az status=0008  Ze status=0009
14:05:43 Check angles
14:05:43 SkyScan query
14:05:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:05:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:05:44 Message to Master queued w/err=0: serial=196003 error=0
14:05:49 Received message from Master: op=Filter serial=196004
14:05:49 Color wheel filter change from 0 to 0
14:05:49 FLIGetFilterPos err=0  currentPosition=0
14:05:49 FLIGetStepsRemaining err=0  RemainingSteps=0
14:05:49 Filter is already there-color wheel unchanged
14:05:49 Received message from Master: op=Shutter serial=196005
14:05:49 Shutter LASER open
14:05:49 Received message from Camera: op=State serial=196007
14:05:49 GetSingleValue result=40  Value=cccccccc
14:05:49 SkyScan query
14:05:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:05:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:05:50 Parameters OK
14:05:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:05:50 Set A/D data flow result=40
14:05:50 Set A/D channel type result=40
14:05:50 Set A/D encoding result=40
14:05:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:05:50 Set channel filter=0.000000e+000  result=40
14:05:50 Config A/D  Result=40
14:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:05:50 Get A/D filter: -9.255963e+061  result=40
14:05:50 Get A/D value=-858993460  result=40
14:05:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:05:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:05:50 Parameters OK
14:05:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:05:50 Set A/D data flow result=40
14:05:50 Set A/D channel type result=40
14:05:50 Set A/D encoding result=40
14:05:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:05:50 Set channel filter=0.000000e+000  result=40
14:05:50 Config A/D  Result=40
14:05:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:05:50 Get A/D filter: -9.255963e+061  result=40
14:05:50 Get A/D value=-858993460  result=40
14:05:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:05:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:05:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:05:50 Aux=
14:05:50 Message to Camera, serial 196007 queued
14:05:58 Received message from Master: op=Shutter serial=196017
14:05:58 Shutter LASER close
14:05:59 Received message from Master: op=PointingHead serial=196021
14:05:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:05:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:05:59 Point started: ret=0
14:05:59 point_skyscan result=0
14:06:00 Check angles
14:06:00 SkyScan query
14:06:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.68<-21512  Statuses=0008 0009
14:06:01 Msec=0  True Az=112.995  Ze=-142.68  Az status=0008  Ze status=0009
14:06:01 Check angles
14:06:01 SkyScan query
14:06:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.71<-20114  Statuses=0008 0009
14:06:01 Msec=750  True Az=112.995  Ze=-121.71  Az status=0008  Ze status=0009
14:06:01 Check angles
14:06:01 SkyScan query
14:06:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.785<-18719  Statuses=0008 0009
14:06:02 Msec=1500  True Az=112.995  Ze=-100.785  Az status=0008  Ze status=0009
14:06:02 Check angles
14:06:02 SkyScan query
14:06:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.365<-17291  Statuses=0008 0009
14:06:03 Msec=2250  True Az=112.995  Ze=-79.365  Az status=0008  Ze status=0009
14:06:03 Check angles
14:06:03 SkyScan query
14:06:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.41<-15894  Statuses=0008 0009
14:06:04 Msec=3000  True Az=112.995  Ze=-58.41  Az status=0008  Ze status=0009
14:06:04 Check angles
14:06:04 SkyScan query
14:06:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.455<-14497  Statuses=0008 0009
14:06:04 Msec=3750  True Az=112.995  Ze=-37.455  Az status=0008  Ze status=0009
14:06:04 Check angles
14:06:04 SkyScan query
14:06:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.5<-13100  Statuses=0008 0009
14:06:05 Msec=4500  True Az=112.995  Ze=-16.5  Az status=0008  Ze status=0009
14:06:05 Check angles
14:06:05 SkyScan query
14:06:06 SkyScan query done: ret=0  az=112.995<-7533  ze=4.365<-11709  Statuses=0008 0009
14:06:06 Msec=5250  True Az=112.995  Ze=4.365  Az status=0008  Ze status=0009
14:06:06 Check angles
14:06:06 SkyScan query
14:06:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:06:07 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:06:07 Message to Master queued w/err=0: serial=196021 error=0
14:06:12 Received message from Master: op=Filter serial=196022
14:06:12 Color wheel filter change from 0 to 0
14:06:12 FLIGetFilterPos err=0  currentPosition=0
14:06:12 FLIGetStepsRemaining err=0  RemainingSteps=0
14:06:12 Filter is already there-color wheel unchanged
14:06:12 Received message from Master: op=Shutter serial=196023
14:06:12 Shutter LASER close
14:06:12 Received message from Camera: op=State serial=196025
14:06:12 GetSingleValue result=40  Value=cccccccc
14:06:12 SkyScan query
14:06:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:06:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:06:12 Parameters OK
14:06:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:06:12 Set A/D data flow result=40
14:06:12 Set A/D channel type result=40
14:06:12 Set A/D encoding result=40
14:06:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:06:12 Set channel filter=0.000000e+000  result=40
14:06:12 Config A/D  Result=40
14:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:06:12 Get A/D filter: -9.255963e+061  result=40
14:06:12 Get A/D value=-858993460  result=40
14:06:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:06:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:06:12 Parameters OK
14:06:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:06:12 Set A/D data flow result=40
14:06:12 Set A/D channel type result=40
14:06:12 Set A/D encoding result=40
14:06:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:06:12 Set channel filter=0.000000e+000  result=40
14:06:12 Config A/D  Result=40
14:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:06:12 Get A/D filter: -9.255963e+061  result=40
14:06:12 Get A/D value=-858993460  result=40
14:06:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:06:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:06:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:06:12 Aux=
14:06:12 Message to Camera, serial 196025 queued
14:06:49 Received message from Master: op=PointingHead serial=196038
14:06:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:06:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:06:50 Point started: ret=0
14:06:50 point_skyscan result=0
14:06:50 Check angles
14:06:50 SkyScan query
14:06:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:06:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:06:51 Message to Master queued w/err=0: serial=196038 error=0
14:06:56 Received message from Master: op=Filter serial=196039
14:06:56 Color wheel filter change from 0 to 0
14:06:56 FLIGetFilterPos err=0  currentPosition=0
14:06:56 FLIGetStepsRemaining err=0  RemainingSteps=0
14:06:56 Filter is already there-color wheel unchanged
14:06:56 Received message from Master: op=Shutter serial=196040
14:06:56 Shutter LASER close
14:06:56 Received message from Camera: op=State serial=196042
14:06:56 GetSingleValue result=40  Value=cccccccc
14:06:56 SkyScan query
14:06:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:06:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:06:57 Parameters OK
14:06:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:06:57 Set A/D data flow result=40
14:06:57 Set A/D channel type result=40
14:06:57 Set A/D encoding result=40
14:06:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:06:57 Set channel filter=0.000000e+000  result=40
14:06:57 Config A/D  Result=40
14:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:06:57 Get A/D filter: -9.255963e+061  result=40
14:06:57 Get A/D value=-858993460  result=40
14:06:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:06:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:06:57 Parameters OK
14:06:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:06:57 Set A/D data flow result=40
14:06:57 Set A/D channel type result=40
14:06:57 Set A/D encoding result=40
14:06:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:06:57 Set channel filter=0.000000e+000  result=40
14:06:57 Config A/D  Result=40
14:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:06:57 Get A/D filter: -9.255963e+061  result=40
14:06:57 Get A/D value=-858993460  result=40
14:06:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:06:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:06:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:06:57 Aux=
14:06:57 Message to Camera, serial 196042 queued
14:07:33 Received message from Master: op=PointingHead serial=196054
14:07:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:07:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:07:33 Point started: ret=0
14:07:33 point_skyscan result=0
14:07:34 Check angles
14:07:34 SkyScan query
14:07:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:07:34 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:07:34 Message to Master queued w/err=0: serial=196054 error=0
14:07:39 Received message from Master: op=Filter serial=196055
14:07:39 Color wheel filter change from 0 to 0
14:07:39 FLIGetFilterPos err=0  currentPosition=0
14:07:39 FLIGetStepsRemaining err=0  RemainingSteps=0
14:07:39 Filter is already there-color wheel unchanged
14:07:40 Received message from Master: op=Shutter serial=196056
14:07:40 Shutter LASER close
14:07:40 Received message from Camera: op=State serial=196058
14:07:40 GetSingleValue result=40  Value=cccccccc
14:07:40 SkyScan query
14:07:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:07:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:07:40 Parameters OK
14:07:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:07:40 Set A/D data flow result=40
14:07:40 Set A/D channel type result=40
14:07:40 Set A/D encoding result=40
14:07:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:07:40 Set channel filter=0.000000e+000  result=40
14:07:40 Config A/D  Result=40
14:07:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:07:40 Get A/D filter: -9.255963e+061  result=40
14:07:40 Get A/D value=-858993460  result=40
14:07:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:07:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:07:40 Parameters OK
14:07:40 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:07:40 Set A/D data flow result=40
14:07:40 Set A/D channel type result=40
14:07:40 Set A/D encoding result=40
14:07:40 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:07:40 Set channel filter=0.000000e+000  result=40
14:07:40 Config A/D  Result=40
14:07:40 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:07:40 Get A/D filter: -9.255963e+061  result=40
14:07:40 Get A/D value=-858993460  result=40
14:07:40 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:07:40 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:07:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:07:40 Aux=
14:07:40 Message to Camera, serial 196058 queued
14:08:17 Received message from Master: op=PointingHead serial=196071
14:08:17 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:08:17 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:08:17 Point started: ret=0
14:08:17 point_skyscan result=0
14:08:18 Check angles
14:08:18 SkyScan query
14:08:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:08:19 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:08:19 Message to Master queued w/err=0: serial=196071 error=0
14:08:24 Received message from Master: op=Filter serial=196072
14:08:24 Color wheel filter change from 0 to 0
14:08:24 FLIGetFilterPos err=0  currentPosition=0
14:08:24 FLIGetStepsRemaining err=0  RemainingSteps=0
14:08:24 Filter is already there-color wheel unchanged
14:08:24 Received message from Master: op=Shutter serial=196073
14:08:24 Shutter LASER close
14:08:24 Received message from Camera: op=State serial=196075
14:08:24 GetSingleValue result=40  Value=cccccccc
14:08:24 SkyScan query
14:08:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:08:24 Parameters OK
14:08:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:08:24 Set A/D data flow result=40
14:08:24 Set A/D channel type result=40
14:08:24 Set A/D encoding result=40
14:08:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:08:24 Set channel filter=0.000000e+000  result=40
14:08:24 Config A/D  Result=40
14:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:08:24 Get A/D filter: -9.255963e+061  result=40
14:08:24 Get A/D value=-858993460  result=40
14:08:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:08:24 Parameters OK
14:08:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:08:24 Set A/D data flow result=40
14:08:24 Set A/D channel type result=40
14:08:24 Set A/D encoding result=40
14:08:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:08:24 Set channel filter=0.000000e+000  result=40
14:08:24 Config A/D  Result=40
14:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:08:24 Get A/D filter: -9.255963e+061  result=40
14:08:24 Get A/D value=-858993460  result=40
14:08:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:08:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:08:24 Aux=
14:08:24 Message to Camera, serial 196075 queued
14:09:01 Received message from Master: op=PointingHead serial=196088
14:09:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:09:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:09:02 Point started: ret=0
14:09:02 point_skyscan result=0
14:09:02 Check angles
14:09:02 SkyScan query
14:09:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.565<-13571  Statuses=0008 0009
14:09:03 Msec=0  True Az=112.995  Ze=-23.565  Az status=0008  Ze status=0009
14:09:03 Check angles
14:09:03 SkyScan query
14:09:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.955<-14997  Statuses=0008 0009
14:09:04 Msec=750  True Az=112.995  Ze=-44.955  Az status=0008  Ze status=0009
14:09:04 Check angles
14:09:04 SkyScan query
14:09:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.91<-16394  Statuses=0008 0009
14:09:04 Msec=1500  True Az=112.995  Ze=-65.91  Az status=0008  Ze status=0009
14:09:05 Check angles
14:09:05 SkyScan query
14:09:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.85<-17790  Statuses=0008 0009
14:09:05 Msec=2250  True Az=112.995  Ze=-86.85  Az status=0008  Ze status=0009
14:09:05 Check angles
14:09:05 SkyScan query
14:09:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.255<-19217  Statuses=0008 0009
14:09:06 Msec=3000  True Az=112.995  Ze=-108.255  Az status=0008  Ze status=0009
14:09:06 Check angles
14:09:06 SkyScan query
14:09:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.63<-20642  Statuses=0008 0009
14:09:07 Msec=3750  True Az=112.995  Ze=-129.63  Az status=0008  Ze status=0009
14:09:07 Check angles
14:09:07 SkyScan query
14:09:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.57<-22038  Statuses=0008 0009
14:09:08 Msec=4500  True Az=112.995  Ze=-150.57  Az status=0008  Ze status=0009
14:09:08 Check angles
14:09:08 SkyScan query
14:09:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.6<-23440  Statuses=0008 0009
14:09:08 Msec=5250  True Az=112.995  Ze=-171.6  Az status=0008  Ze status=0009
14:09:08 Check angles
14:09:08 SkyScan query
14:09:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:09:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:09:09 Message to Master queued w/err=0: serial=196088 error=0
14:09:14 Received message from Master: op=Filter serial=196089
14:09:14 Color wheel filter change from 0 to 0
14:09:14 FLIGetFilterPos err=0  currentPosition=0
14:09:14 FLIGetStepsRemaining err=0  RemainingSteps=0
14:09:14 Filter is already there-color wheel unchanged
14:09:14 Received message from Master: op=Shutter serial=196090
14:09:14 Shutter LASER open
14:09:14 Received message from Camera: op=State serial=196092
14:09:14 GetSingleValue result=40  Value=cccccccc
14:09:14 SkyScan query
14:09:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:09:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:09:15 Parameters OK
14:09:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:09:15 Set A/D data flow result=40
14:09:15 Set A/D channel type result=40
14:09:15 Set A/D encoding result=40
14:09:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:09:15 Set channel filter=0.000000e+000  result=40
14:09:15 Config A/D  Result=40
14:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:09:15 Get A/D filter: -9.255963e+061  result=40
14:09:15 Get A/D value=-858993460  result=40
14:09:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:09:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:09:15 Parameters OK
14:09:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:09:15 Set A/D data flow result=40
14:09:15 Set A/D channel type result=40
14:09:15 Set A/D encoding result=40
14:09:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:09:15 Set channel filter=0.000000e+000  result=40
14:09:15 Config A/D  Result=40
14:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:09:15 Get A/D filter: -9.255963e+061  result=40
14:09:15 Get A/D value=-858993460  result=40
14:09:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:09:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:09:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:09:15 Aux=
14:09:15 Message to Camera, serial 196092 queued
14:09:23 Received message from Master: op=Shutter serial=196102
14:09:23 Shutter LASER close
14:09:24 Received message from Master: op=PointingHead serial=196106
14:09:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:09:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:09:24 Point started: ret=0
14:09:24 point_skyscan result=0
14:09:25 Check angles
14:09:25 SkyScan query
14:09:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.505<-21567  Statuses=0008 0009
14:09:26 Msec=0  True Az=112.995  Ze=-143.505  Az status=0008  Ze status=0009
14:09:26 Check angles
14:09:26 SkyScan query
14:09:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.565<-20171  Statuses=0008 0009
14:09:26 Msec=750  True Az=112.995  Ze=-122.565  Az status=0008  Ze status=0009
14:09:27 Check angles
14:09:27 SkyScan query
14:09:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.565<-18771  Statuses=0008 0009
14:09:27 Msec=1500  True Az=112.995  Ze=-101.565  Az status=0008  Ze status=0009
14:09:27 Check angles
14:09:27 SkyScan query
14:09:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.595<-17373  Statuses=0008 0009
14:09:28 Msec=2250  True Az=112.995  Ze=-80.595  Az status=0008  Ze status=0009
14:09:28 Check angles
14:09:28 SkyScan query
14:09:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.25<-15950  Statuses=0008 0009
14:09:29 Msec=3000  True Az=112.995  Ze=-59.25  Az status=0008  Ze status=0009
14:09:29 Check angles
14:09:29 SkyScan query
14:09:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.265<-14551  Statuses=0008 0009
14:09:29 Msec=3750  True Az=112.995  Ze=-38.265  Az status=0008  Ze status=0009
14:09:30 Check angles
14:09:30 SkyScan query
14:09:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.325<-13155  Statuses=0008 0009
14:09:30 Msec=4500  True Az=112.995  Ze=-17.325  Az status=0008  Ze status=0009
14:09:30 Check angles
14:09:30 SkyScan query
14:09:31 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
14:09:31 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
14:09:31 Check angles
14:09:31 SkyScan query
14:09:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:09:32 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:09:32 Message to Master queued w/err=0: serial=196106 error=0
14:09:37 Received message from Master: op=Filter serial=196107
14:09:37 Color wheel filter change from 0 to 0
14:09:37 FLIGetFilterPos err=0  currentPosition=0
14:09:37 FLIGetStepsRemaining err=0  RemainingSteps=0
14:09:37 Filter is already there-color wheel unchanged
14:09:37 Received message from Master: op=Shutter serial=196108
14:09:37 Shutter LASER close
14:09:37 Received message from Camera: op=State serial=196110
14:09:37 GetSingleValue result=40  Value=cccccccc
14:09:37 SkyScan query
14:09:38 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:09:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:09:38 Parameters OK
14:09:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:09:38 Set A/D data flow result=40
14:09:38 Set A/D channel type result=40
14:09:38 Set A/D encoding result=40
14:09:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:09:38 Set channel filter=0.000000e+000  result=40
14:09:38 Config A/D  Result=40
14:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:09:38 Get A/D filter: -9.255963e+061  result=40
14:09:38 Get A/D value=-858993460  result=40
14:09:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:09:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:09:38 Parameters OK
14:09:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:09:38 Set A/D data flow result=40
14:09:38 Set A/D channel type result=40
14:09:38 Set A/D encoding result=40
14:09:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:09:38 Set channel filter=0.000000e+000  result=40
14:09:38 Config A/D  Result=40
14:09:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:09:38 Get A/D filter: -9.255963e+061  result=40
14:09:38 Get A/D value=-858993460  result=40
14:09:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:09:38 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:09:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:09:38 Aux=
14:09:38 Message to Camera, serial 196110 queued
14:10:14 Received message from Master: op=PointingHead serial=196123
14:10:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:10:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:10:15 Point started: ret=0
14:10:15 point_skyscan result=0
14:10:16 Check angles
14:10:16 SkyScan query
14:10:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:10:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:10:16 Message to Master queued w/err=0: serial=196123 error=0
14:10:21 Received message from Master: op=Filter serial=196124
14:10:21 Color wheel filter change from 0 to 0
14:10:21 FLIGetFilterPos err=0  currentPosition=0
14:10:21 FLIGetStepsRemaining err=0  RemainingSteps=0
14:10:21 Filter is already there-color wheel unchanged
14:10:21 Received message from Master: op=Shutter serial=196125
14:10:21 Shutter LASER close
14:10:21 Received message from Camera: op=State serial=196127
14:10:21 GetSingleValue result=40  Value=cccccccc
14:10:21 SkyScan query
14:10:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:10:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:10:22 Parameters OK
14:10:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:10:22 Set A/D data flow result=40
14:10:22 Set A/D channel type result=40
14:10:22 Set A/D encoding result=40
14:10:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:10:22 Set channel filter=0.000000e+000  result=40
14:10:22 Config A/D  Result=40
14:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:10:22 Get A/D filter: -9.255963e+061  result=40
14:10:22 Get A/D value=-858993460  result=40
14:10:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:10:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:10:22 Parameters OK
14:10:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:10:22 Set A/D data flow result=40
14:10:22 Set A/D channel type result=40
14:10:22 Set A/D encoding result=40
14:10:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:10:22 Set channel filter=0.000000e+000  result=40
14:10:22 Config A/D  Result=40
14:10:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:10:22 Get A/D filter: -9.255963e+061  result=40
14:10:22 Get A/D value=-858993460  result=40
14:10:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:10:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:10:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:10:22 Aux=
14:10:22 Message to Camera, serial 196127 queued
14:10:59 Received message from Master: op=PointingHead serial=196140
14:10:59 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:10:59 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:10:59 Point started: ret=0
14:10:59 point_skyscan result=0
14:11:00 Check angles
14:11:00 SkyScan query
14:11:01 SkyScan query done: ret=0  az=136.44<-9096  ze=-6.51<-12434  Statuses=0009 0008
14:11:01 Msec=0  True Az=136.44  Ze=-6.51  Az status=0009  Ze status=0008
14:11:01 Check angles
14:11:01 SkyScan query
14:11:01 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
14:11:01 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
14:11:01 Check angles
14:11:01 SkyScan query
14:11:02 SkyScan query done: ret=0  az=171.345<-11423  ze=-6.495<-12433  Statuses=0009 0008
14:11:02 Msec=1500  True Az=171.345  Ze=-6.495  Az status=0009  Ze status=0008
14:11:02 Check angles
14:11:02 SkyScan query
14:11:03 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:11:03 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:11:03 Message to Master queued w/err=0: serial=196140 error=0
14:11:08 Received message from Master: op=Filter serial=196141
14:11:08 Color wheel filter change from 0 to 0
14:11:08 FLIGetFilterPos err=0  currentPosition=0
14:11:08 FLIGetStepsRemaining err=0  RemainingSteps=0
14:11:08 Filter is already there-color wheel unchanged
14:11:08 Received message from Master: op=Shutter serial=196142
14:11:08 Shutter LASER close
14:11:08 Received message from Camera: op=State serial=196144
14:11:08 GetSingleValue result=40  Value=cccccccc
14:11:08 SkyScan query
14:11:09 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:11:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:11:09 Parameters OK
14:11:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:11:09 Set A/D data flow result=40
14:11:09 Set A/D channel type result=40
14:11:09 Set A/D encoding result=40
14:11:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:11:09 Set channel filter=0.000000e+000  result=40
14:11:09 Config A/D  Result=40
14:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:11:09 Get A/D filter: -9.255963e+061  result=40
14:11:09 Get A/D value=-858993460  result=40
14:11:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:11:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:11:09 Parameters OK
14:11:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:11:09 Set A/D data flow result=40
14:11:09 Set A/D channel type result=40
14:11:09 Set A/D encoding result=40
14:11:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:11:09 Set channel filter=0.000000e+000  result=40
14:11:09 Config A/D  Result=40
14:11:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:11:09 Get A/D filter: -9.255963e+061  result=40
14:11:09 Get A/D value=-858993460  result=40
14:11:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:11:09 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:11:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:11:09 Aux=
14:11:09 Message to Camera, serial 196144 queued
14:11:45 Received message from Master: op=PointingHead serial=196157
14:11:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:11:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:11:46 Point started: ret=0
14:11:46 point_skyscan result=0
14:11:47 Check angles
14:11:47 SkyScan query
14:11:47 SkyScan query done: ret=0  az=152.505<-10167  ze=6.51<-11566  Statuses=0009 0008
14:11:47 Msec=0  True Az=152.505  Ze=6.51  Az status=0009  Ze status=0008
14:11:47 Check angles
14:11:47 SkyScan query
14:11:48 SkyScan query done: ret=0  az=135.045<-9003  ze=6.495<-11567  Statuses=0009 0008
14:11:48 Msec=750  True Az=135.045  Ze=6.495  Az status=0009  Ze status=0008
14:11:48 Check angles
14:11:48 SkyScan query
14:11:49 SkyScan query done: ret=0  az=117.6<-7840  ze=6.495<-11567  Statuses=0009 0008
14:11:49 Msec=1500  True Az=117.6  Ze=6.495  Az status=0009  Ze status=0008
14:11:49 Check angles
14:11:49 SkyScan query
14:11:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:11:49 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:11:49 Message to Master queued w/err=0: serial=196157 error=0
14:11:54 Received message from Master: op=Filter serial=196158
14:11:54 Color wheel filter change from 0 to 0
14:11:54 FLIGetFilterPos err=0  currentPosition=0
14:11:54 FLIGetStepsRemaining err=0  RemainingSteps=0
14:11:54 Filter is already there-color wheel unchanged
14:11:55 Received message from Master: op=Shutter serial=196159
14:11:55 Shutter LASER close
14:11:55 Received message from Camera: op=State serial=196161
14:11:55 GetSingleValue result=40  Value=cccccccc
14:11:55 SkyScan query
14:11:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:11:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:11:55 Parameters OK
14:11:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:11:55 Set A/D data flow result=40
14:11:55 Set A/D channel type result=40
14:11:55 Set A/D encoding result=40
14:11:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:11:55 Set channel filter=0.000000e+000  result=40
14:11:55 Config A/D  Result=40
14:11:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:11:55 Get A/D filter: -9.255963e+061  result=40
14:11:55 Get A/D value=-858993460  result=40
14:11:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:11:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:11:55 Parameters OK
14:11:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:11:55 Set A/D data flow result=40
14:11:55 Set A/D channel type result=40
14:11:55 Set A/D encoding result=40
14:11:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:11:55 Set channel filter=0.000000e+000  result=40
14:11:55 Config A/D  Result=40
14:11:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:11:55 Get A/D filter: -9.255963e+061  result=40
14:11:55 Get A/D value=-858993460  result=40
14:11:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:11:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:11:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:11:55 Aux=
14:11:55 Message to Camera, serial 196161 queued
14:12:32 Received message from Master: op=PointingHead serial=196174
14:12:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:12:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:12:32 Point started: ret=0
14:12:32 point_skyscan result=0
14:12:33 Check angles
14:12:33 SkyScan query
14:12:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.4<-13560  Statuses=0008 0009
14:12:34 Msec=0  True Az=112.995  Ze=-23.4  Az status=0008  Ze status=0009
14:12:34 Check angles
14:12:34 SkyScan query
14:12:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.385<-14959  Statuses=0008 0009
14:12:34 Msec=750  True Az=112.995  Ze=-44.385  Az status=0008  Ze status=0009
14:12:35 Check angles
14:12:35 SkyScan query
14:12:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.76<-16384  Statuses=0008 0009
14:12:35 Msec=1500  True Az=112.995  Ze=-65.76  Az status=0008  Ze status=0009
14:12:35 Check angles
14:12:35 SkyScan query
14:12:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.7<-17780  Statuses=0008 0009
14:12:36 Msec=2250  True Az=112.995  Ze=-86.7  Az status=0008  Ze status=0009
14:12:36 Check angles
14:12:36 SkyScan query
14:12:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
14:12:37 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
14:12:37 Check angles
14:12:37 SkyScan query
14:12:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.03<-20602  Statuses=0008 0009
14:12:37 Msec=3750  True Az=112.995  Ze=-129.03  Az status=0008  Ze status=0009
14:12:38 Check angles
14:12:38 SkyScan query
14:12:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-150<-22000  Statuses=0008 0009
14:12:38 Msec=4500  True Az=112.995  Ze=-150  Az status=0008  Ze status=0009
14:12:38 Check angles
14:12:38 SkyScan query
14:12:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.865<-23391  Statuses=0008 0009
14:12:39 Msec=5250  True Az=112.995  Ze=-170.865  Az status=0008  Ze status=0009
14:12:39 Check angles
14:12:39 SkyScan query
14:12:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:12:40 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:12:40 Message to Master queued w/err=0: serial=196174 error=0
14:12:45 Received message from Master: op=Filter serial=196175
14:12:45 Color wheel filter change from 0 to 0
14:12:45 FLIGetFilterPos err=0  currentPosition=0
14:12:45 FLIGetStepsRemaining err=0  RemainingSteps=0
14:12:45 Filter is already there-color wheel unchanged
14:12:45 Received message from Master: op=Shutter serial=196176
14:12:45 Shutter LASER open
14:12:45 Received message from Camera: op=State serial=196178
14:12:45 GetSingleValue result=40  Value=cccccccc
14:12:45 SkyScan query
14:12:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:12:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:12:46 Parameters OK
14:12:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:12:46 Set A/D data flow result=40
14:12:46 Set A/D channel type result=40
14:12:46 Set A/D encoding result=40
14:12:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:12:46 Set channel filter=0.000000e+000  result=40
14:12:46 Config A/D  Result=40
14:12:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:12:46 Get A/D filter: -9.255963e+061  result=40
14:12:46 Get A/D value=-858993460  result=40
14:12:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:12:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:12:46 Parameters OK
14:12:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:12:46 Set A/D data flow result=40
14:12:46 Set A/D channel type result=40
14:12:46 Set A/D encoding result=40
14:12:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:12:46 Set channel filter=0.000000e+000  result=40
14:12:46 Config A/D  Result=40
14:12:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:12:46 Get A/D filter: -9.255963e+061  result=40
14:12:46 Get A/D value=-858993460  result=40
14:12:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:12:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:12:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:12:46 Aux=
14:12:46 Message to Camera, serial 196178 queued
14:12:54 Received message from Master: op=Shutter serial=196188
14:12:54 Shutter LASER close
14:12:54 Received message from Master: op=PointingHead serial=196192
14:12:54 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:12:54 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:12:55 Point started: ret=0
14:12:55 point_skyscan result=0
14:12:56 Check angles
14:12:56 SkyScan query
14:12:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.86<-21524  Statuses=0008 0009
14:12:56 Msec=0  True Az=112.995  Ze=-142.86  Az status=0008  Ze status=0009
14:12:56 Check angles
14:12:56 SkyScan query
14:12:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.875<-20125  Statuses=0008 0009
14:12:57 Msec=750  True Az=112.995  Ze=-121.875  Az status=0008  Ze status=0009
14:12:57 Check angles
14:12:57 SkyScan query
14:12:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.965<-18731  Statuses=0008 0009
14:12:58 Msec=1500  True Az=112.995  Ze=-100.965  Az status=0008  Ze status=0009
14:12:58 Check angles
14:12:58 SkyScan query
14:12:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.56<-17304  Statuses=0008 0009
14:12:58 Msec=2250  True Az=112.995  Ze=-79.56  Az status=0008  Ze status=0009
14:12:59 Check angles
14:12:59 SkyScan query
14:12:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.605<-15907  Statuses=0008 0009
14:12:59 Msec=3000  True Az=112.995  Ze=-58.605  Az status=0008  Ze status=0009
14:12:59 Check angles
14:12:59 SkyScan query
14:13:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.65<-14510  Statuses=0008 0009
14:13:00 Msec=3750  True Az=112.995  Ze=-37.65  Az status=0008  Ze status=0009
14:13:00 Check angles
14:13:00 SkyScan query
14:13:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.695<-13113  Statuses=0008 0009
14:13:01 Msec=4500  True Az=112.995  Ze=-16.695  Az status=0008  Ze status=0009
14:13:01 Check angles
14:13:01 SkyScan query
14:13:01 SkyScan query done: ret=0  az=112.995<-7533  ze=4.23<-11718  Statuses=0008 0009
14:13:01 Msec=5250  True Az=112.995  Ze=4.23  Az status=0008  Ze status=0009
14:13:02 Check angles
14:13:02 SkyScan query
14:13:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:13:02 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:13:02 Message to Master queued w/err=0: serial=196192 error=0
14:13:07 Received message from Master: op=Filter serial=196193
14:13:07 Color wheel filter change from 0 to 0
14:13:07 FLIGetFilterPos err=0  currentPosition=0
14:13:07 FLIGetStepsRemaining err=0  RemainingSteps=0
14:13:07 Filter is already there-color wheel unchanged
14:13:07 Received message from Master: op=Shutter serial=196194
14:13:07 Shutter LASER close
14:13:08 Received message from Camera: op=State serial=196196
14:13:08 GetSingleValue result=40  Value=cccccccc
14:13:08 SkyScan query
14:13:08 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:13:08 Parameters OK
14:13:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:13:08 Set A/D data flow result=40
14:13:08 Set A/D channel type result=40
14:13:08 Set A/D encoding result=40
14:13:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:13:08 Set channel filter=0.000000e+000  result=40
14:13:08 Config A/D  Result=40
14:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:13:08 Get A/D filter: -9.255963e+061  result=40
14:13:08 Get A/D value=-858993460  result=40
14:13:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:13:08 Parameters OK
14:13:08 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:13:08 Set A/D data flow result=40
14:13:08 Set A/D channel type result=40
14:13:08 Set A/D encoding result=40
14:13:08 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:13:08 Set channel filter=0.000000e+000  result=40
14:13:08 Config A/D  Result=40
14:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:13:08 Get A/D filter: -9.255963e+061  result=40
14:13:08 Get A/D value=-858993460  result=40
14:13:08 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:13:08 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:13:08 Aux=
14:13:08 Message to Camera, serial 196196 queued
14:13:45 Received message from Master: op=PointingHead serial=196209
14:13:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:13:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:13:45 Point started: ret=0
14:13:45 point_skyscan result=0
14:13:46 Check angles
14:13:46 SkyScan query
14:13:47 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:13:47 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:13:47 Message to Master queued w/err=0: serial=196209 error=0
14:13:52 Received message from Master: op=Filter serial=196210
14:13:52 Color wheel filter change from 0 to 0
14:13:52 FLIGetFilterPos err=0  currentPosition=0
14:13:52 FLIGetStepsRemaining err=0  RemainingSteps=0
14:13:52 Filter is already there-color wheel unchanged
14:13:52 Received message from Master: op=Shutter serial=196211
14:13:52 Shutter LASER close
14:13:52 Received message from Camera: op=State serial=196213
14:13:52 GetSingleValue result=40  Value=cccccccc
14:13:52 SkyScan query
14:13:52 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:13:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:13:52 Parameters OK
14:13:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:13:52 Set A/D data flow result=40
14:13:52 Set A/D channel type result=40
14:13:52 Set A/D encoding result=40
14:13:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:13:52 Set channel filter=0.000000e+000  result=40
14:13:52 Config A/D  Result=40
14:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:13:52 Get A/D filter: -9.255963e+061  result=40
14:13:52 Get A/D value=-858993460  result=40
14:13:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:13:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:13:52 Parameters OK
14:13:52 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:13:52 Set A/D data flow result=40
14:13:52 Set A/D channel type result=40
[UTC 2019-3-9  14:13:52]
14:13:52 Set A/D encoding result=40
14:13:52 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:13:52 Set channel filter=0.000000e+000  result=40
14:13:52 Config A/D  Result=40
14:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:13:52 Get A/D filter: -9.255963e+061  result=40
14:13:52 Get A/D value=-858993460  result=40
14:13:52 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:13:52 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:13:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:13:52 Aux=
14:13:52 Message to Camera, serial 196213 queued
14:14:29 Received message from Master: op=PointingHead serial=196226
14:14:29 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:14:29 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:14:30 Point started: ret=0
14:14:30 point_skyscan result=0
14:14:30 Check angles
14:14:30 SkyScan query
14:14:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:14:31 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:14:31 Message to Master queued w/err=0: serial=196226 error=0
14:14:36 Received message from Master: op=Filter serial=196227
14:14:36 Color wheel filter change from 0 to 0
14:14:36 FLIGetFilterPos err=0  currentPosition=0
14:14:36 FLIGetStepsRemaining err=0  RemainingSteps=0
14:14:36 Filter is already there-color wheel unchanged
14:14:36 Received message from Master: op=Shutter serial=196228
14:14:36 Shutter LASER close
14:14:36 Received message from Camera: op=State serial=196230
14:14:36 GetSingleValue result=40  Value=cccccccc
14:14:36 SkyScan query
14:14:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:14:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:14:37 Parameters OK
14:14:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:14:37 Set A/D data flow result=40
14:14:37 Set A/D channel type result=40
14:14:37 Set A/D encoding result=40
14:14:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:14:37 Set channel filter=0.000000e+000  result=40
14:14:37 Config A/D  Result=40
14:14:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:14:37 Get A/D filter: -9.255963e+061  result=40
14:14:37 Get A/D value=-858993460  result=40
14:14:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:14:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:14:37 Parameters OK
14:14:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:14:37 Set A/D data flow result=40
14:14:37 Set A/D channel type result=40
14:14:37 Set A/D encoding result=40
14:14:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:14:37 Set channel filter=0.000000e+000  result=40
14:14:37 Config A/D  Result=40
14:14:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:14:37 Get A/D filter: -9.255963e+061  result=40
14:14:37 Get A/D value=-858993460  result=40
14:14:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:14:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:14:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:14:37 Aux=
14:14:37 Message to Camera, serial 196230 queued
14:15:13 Received message from Master: op=PointingHead serial=196243
14:15:13 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:15:13 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:15:14 Point started: ret=0
14:15:14 point_skyscan result=0
14:15:15 Check angles
14:15:15 SkyScan query
14:15:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:15:15 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:15:15 Message to Master queued w/err=0: serial=196243 error=0
14:15:20 Received message from Master: op=Filter serial=196244
14:15:20 Color wheel filter change from 0 to 0
14:15:20 FLIGetFilterPos err=0  currentPosition=0
14:15:20 FLIGetStepsRemaining err=0  RemainingSteps=0
14:15:20 Filter is already there-color wheel unchanged
14:15:20 Received message from Master: op=Shutter serial=196245
14:15:20 Shutter LASER close
14:15:20 Received message from Camera: op=State serial=196247
14:15:20 GetSingleValue result=40  Value=cccccccc
14:15:20 SkyScan query
14:15:21 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:15:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:15:21 Parameters OK
14:15:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:15:21 Set A/D data flow result=40
14:15:21 Set A/D channel type result=40
14:15:21 Set A/D encoding result=40
14:15:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:15:21 Set channel filter=0.000000e+000  result=40
14:15:21 Config A/D  Result=40
14:15:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:15:21 Get A/D filter: -9.255963e+061  result=40
14:15:21 Get A/D value=-858993460  result=40
14:15:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:15:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:15:21 Parameters OK
14:15:21 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:15:21 Set A/D data flow result=40
14:15:21 Set A/D channel type result=40
14:15:21 Set A/D encoding result=40
14:15:21 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:15:21 Set channel filter=0.000000e+000  result=40
14:15:21 Config A/D  Result=40
14:15:21 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:15:21 Get A/D filter: -9.255963e+061  result=40
14:15:21 Get A/D value=-858993460  result=40
14:15:21 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:15:21 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:15:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:15:21 Aux=
14:15:21 Message to Camera, serial 196247 queued
14:15:58 Received message from Master: op=PointingHead serial=196260
14:15:58 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:15:58 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:15:58 Point started: ret=0
14:15:58 point_skyscan result=0
14:15:59 Check angles
14:15:59 SkyScan query
14:16:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.085<-13539  Statuses=0008 0009
14:16:00 Msec=0  True Az=112.995  Ze=-23.085  Az status=0008  Ze status=0009
14:16:00 Check angles
14:16:00 SkyScan query
14:16:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.505<-14967  Statuses=0008 0009
14:16:00 Msec=750  True Az=112.995  Ze=-44.505  Az status=0008  Ze status=0009
14:16:00 Check angles
14:16:00 SkyScan query
14:16:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.46<-16364  Statuses=0008 0009
14:16:01 Msec=1500  True Az=112.995  Ze=-65.46  Az status=0008  Ze status=0009
14:16:01 Check angles
14:16:01 SkyScan query
14:16:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.4<-17760  Statuses=0008 0009
14:16:02 Msec=2250  True Az=112.995  Ze=-86.4  Az status=0008  Ze status=0009
14:16:02 Check angles
14:16:02 SkyScan query
14:16:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.37<-19158  Statuses=0008 0009
14:16:03 Msec=3000  True Az=112.995  Ze=-107.37  Az status=0008  Ze status=0009
14:16:03 Check angles
14:16:03 SkyScan query
14:16:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.31<-20554  Statuses=0008 0009
14:16:03 Msec=3750  True Az=112.995  Ze=-128.31  Az status=0008  Ze status=0009
14:16:03 Check angles
14:16:03 SkyScan query
14:16:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.28<-21952  Statuses=0008 0009
14:16:04 Msec=4500  True Az=112.995  Ze=-149.28  Az status=0008  Ze status=0009
14:16:04 Check angles
14:16:04 SkyScan query
14:16:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.22<-23348  Statuses=0008 0009
14:16:05 Msec=5250  True Az=112.995  Ze=-170.22  Az status=0008  Ze status=0009
14:16:05 Check angles
14:16:05 SkyScan query
14:16:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:16:06 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:16:06 Message to Master queued w/err=0: serial=196260 error=0
14:16:11 Received message from Master: op=Filter serial=196261
14:16:11 Color wheel filter change from 0 to 0
14:16:11 FLIGetFilterPos err=0  currentPosition=0
14:16:11 FLIGetStepsRemaining err=0  RemainingSteps=0
14:16:11 Filter is already there-color wheel unchanged
14:16:11 Received message from Master: op=Shutter serial=196262
14:16:11 Shutter LASER open
14:16:11 Received message from Camera: op=State serial=196264
14:16:11 GetSingleValue result=40  Value=cccccccc
14:16:11 SkyScan query
14:16:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:16:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:16:11 Parameters OK
14:16:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:16:11 Set A/D data flow result=40
14:16:11 Set A/D channel type result=40
14:16:11 Set A/D encoding result=40
14:16:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:16:11 Set channel filter=0.000000e+000  result=40
14:16:11 Config A/D  Result=40
14:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:16:11 Get A/D filter: -9.255963e+061  result=40
14:16:11 Get A/D value=-858993460  result=40
14:16:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:16:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:16:11 Parameters OK
14:16:11 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:16:11 Set A/D data flow result=40
14:16:11 Set A/D channel type result=40
14:16:11 Set A/D encoding result=40
14:16:11 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:16:11 Set channel filter=0.000000e+000  result=40
14:16:11 Config A/D  Result=40
14:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:16:11 Get A/D filter: -9.255963e+061  result=40
14:16:11 Get A/D value=-858993460  result=40
14:16:11 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:16:11 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:16:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:16:11 Aux=
14:16:11 Message to Camera, serial 196264 queued
14:16:20 Received message from Master: op=Shutter serial=196274
14:16:20 Shutter LASER close
14:16:20 Received message from Master: op=PointingHead serial=196278
14:16:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:16:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:16:21 Point started: ret=0
14:16:21 point_skyscan result=0
14:16:22 Check angles
14:16:22 SkyScan query
14:16:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.385<-21559  Statuses=0008 0009
14:16:22 Msec=0  True Az=112.995  Ze=-143.385  Az status=0008  Ze status=0009
14:16:22 Check angles
14:16:22 SkyScan query
14:16:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.43<-20162  Statuses=0008 0009
14:16:23 Msec=750  True Az=112.995  Ze=-122.43  Az status=0008  Ze status=0009
14:16:23 Check angles
14:16:23 SkyScan query
14:16:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.46<-18764  Statuses=0008 0009
14:16:24 Msec=1500  True Az=112.995  Ze=-101.46  Az status=0008  Ze status=0009
14:16:24 Check angles
14:16:24 SkyScan query
14:16:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.49<-17366  Statuses=0008 0009
14:16:24 Msec=2250  True Az=112.995  Ze=-80.49  Az status=0008  Ze status=0009
14:16:25 Check angles
14:16:25 SkyScan query
14:16:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.565<-15971  Statuses=0008 0009
14:16:25 Msec=3000  True Az=112.995  Ze=-59.565  Az status=0008  Ze status=0009
14:16:25 Check angles
14:16:25 SkyScan query
14:16:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.595<-14573  Statuses=0008 0009
14:16:26 Msec=3750  True Az=112.995  Ze=-38.595  Az status=0008  Ze status=0009
14:16:26 Check angles
14:16:26 SkyScan query
14:16:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.655<-13177  Statuses=0008 0009
14:16:27 Msec=4500  True Az=112.995  Ze=-17.655  Az status=0008  Ze status=0009
14:16:27 Check angles
14:16:27 SkyScan query
14:16:27 SkyScan query done: ret=0  az=112.995<-7533  ze=3.315<-11779  Statuses=0008 0009
14:16:27 Msec=5250  True Az=112.995  Ze=3.315  Az status=0008  Ze status=0009
14:16:28 Check angles
14:16:28 SkyScan query
14:16:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:16:28 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:16:28 Message to Master queued w/err=0: serial=196278 error=0
14:16:33 Received message from Master: op=Filter serial=196279
14:16:33 Color wheel filter change from 0 to 0
14:16:33 FLIGetFilterPos err=0  currentPosition=0
14:16:33 FLIGetStepsRemaining err=0  RemainingSteps=0
14:16:33 Filter is already there-color wheel unchanged
14:16:33 Received message from Master: op=Shutter serial=196280
14:16:33 Shutter LASER close
14:16:33 Received message from Camera: op=State serial=196282
14:16:33 GetSingleValue result=40  Value=cccccccc
14:16:33 SkyScan query
14:16:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:16:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:16:34 Parameters OK
14:16:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:16:34 Set A/D data flow result=40
14:16:34 Set A/D channel type result=40
14:16:34 Set A/D encoding result=40
14:16:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:16:34 Set channel filter=0.000000e+000  result=40
14:16:34 Config A/D  Result=40
14:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:16:34 Get A/D filter: -9.255963e+061  result=40
14:16:34 Get A/D value=-858993460  result=40
14:16:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:16:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:16:34 Parameters OK
14:16:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:16:34 Set A/D data flow result=40
14:16:34 Set A/D channel type result=40
14:16:34 Set A/D encoding result=40
14:16:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:16:34 Set channel filter=0.000000e+000  result=40
14:16:34 Config A/D  Result=40
14:16:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:16:34 Get A/D filter: -9.255963e+061  result=40
14:16:34 Get A/D value=-858993460  result=40
14:16:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:16:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:16:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:16:34 Aux=
14:16:34 Message to Camera, serial 196282 queued
14:17:11 Received message from Master: op=PointingHead serial=196295
14:17:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:17:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:17:11 Point started: ret=0
14:17:11 point_skyscan result=0
14:17:12 Check angles
14:17:12 SkyScan query
14:17:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:17:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:17:13 Message to Master queued w/err=0: serial=196295 error=0
14:17:18 Received message from Master: op=Filter serial=196296
14:17:18 Color wheel filter change from 0 to 0
14:17:18 FLIGetFilterPos err=0  currentPosition=0
14:17:18 FLIGetStepsRemaining err=0  RemainingSteps=0
14:17:18 Filter is already there-color wheel unchanged
14:17:18 Received message from Master: op=Shutter serial=196297
14:17:18 Shutter LASER close
14:17:18 Received message from Camera: op=State serial=196299
14:17:18 GetSingleValue result=40  Value=cccccccc
14:17:18 SkyScan query
14:17:18 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:17:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:17:18 Parameters OK
14:17:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:17:18 Set A/D data flow result=40
14:17:18 Set A/D channel type result=40
14:17:18 Set A/D encoding result=40
14:17:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:17:18 Set channel filter=0.000000e+000  result=40
14:17:18 Config A/D  Result=40
14:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:17:18 Get A/D filter: -9.255963e+061  result=40
14:17:18 Get A/D value=-858993460  result=40
14:17:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:17:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:17:18 Parameters OK
14:17:18 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:17:18 Set A/D data flow result=40
14:17:18 Set A/D channel type result=40
14:17:18 Set A/D encoding result=40
14:17:18 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:17:18 Set channel filter=0.000000e+000  result=40
14:17:18 Config A/D  Result=40
14:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:17:18 Get A/D filter: -9.255963e+061  result=40
14:17:18 Get A/D value=-858993460  result=40
14:17:18 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:17:18 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:17:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:17:18 Aux=
14:17:18 Message to Camera, serial 196299 queued
14:17:55 Received message from Master: op=PointingHead serial=196312
14:17:55 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:17:55 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:17:56 Point started: ret=0
14:17:56 point_skyscan result=0
14:17:56 Check angles
14:17:56 SkyScan query
14:17:57 SkyScan query done: ret=0  az=136.095<-9073  ze=-6.51<-12434  Statuses=0009 0008
14:17:57 Msec=0  True Az=136.095  Ze=-6.51  Az status=0009  Ze status=0008
14:17:57 Check angles
14:17:57 SkyScan query
14:17:58 SkyScan query done: ret=0  az=153.855<-10257  ze=-6.495<-12433  Statuses=0009 0008
14:17:58 Msec=750  True Az=153.855  Ze=-6.495  Az status=0009  Ze status=0008
14:17:58 Check angles
14:17:58 SkyScan query
14:17:58 SkyScan query done: ret=0  az=171.705<-11447  ze=-6.495<-12433  Statuses=0009 0008
14:17:58 Msec=1500  True Az=171.705  Ze=-6.495  Az status=0009  Ze status=0008
14:17:59 Check angles
14:17:59 SkyScan query
14:17:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:17:59 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:17:59 Message to Master queued w/err=0: serial=196312 error=0
14:18:04 Received message from Master: op=Filter serial=196313
14:18:04 Color wheel filter change from 0 to 0
14:18:04 FLIGetFilterPos err=0  currentPosition=0
14:18:04 FLIGetStepsRemaining err=0  RemainingSteps=0
14:18:04 Filter is already there-color wheel unchanged
14:18:04 Received message from Master: op=Shutter serial=196314
14:18:04 Shutter LASER close
14:18:04 Received message from Camera: op=State serial=196316
14:18:04 GetSingleValue result=40  Value=cccccccc
14:18:04 SkyScan query
14:18:05 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:18:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:18:05 Parameters OK
14:18:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:18:05 Set A/D data flow result=40
14:18:05 Set A/D channel type result=40
14:18:05 Set A/D encoding result=40
14:18:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:18:05 Set channel filter=0.000000e+000  result=40
14:18:05 Config A/D  Result=40
14:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:18:05 Get A/D filter: -9.255963e+061  result=40
14:18:05 Get A/D value=-858993460  result=40
14:18:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:18:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:18:05 Parameters OK
14:18:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:18:05 Set A/D data flow result=40
14:18:05 Set A/D channel type result=40
14:18:05 Set A/D encoding result=40
14:18:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:18:05 Set channel filter=0.000000e+000  result=40
14:18:05 Config A/D  Result=40
14:18:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:18:05 Get A/D filter: -9.255963e+061  result=40
14:18:05 Get A/D value=-858993460  result=40
14:18:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:18:05 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:18:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:18:05 Aux=
14:18:05 Message to Camera, serial 196316 queued
14:18:42 Received message from Master: op=PointingHead serial=196329
14:18:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:18:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:18:42 Point started: ret=0
14:18:42 point_skyscan result=0
14:18:43 Check angles
14:18:43 SkyScan query
14:18:43 SkyScan query done: ret=0  az=152.85<-10190  ze=6.51<-11566  Statuses=0009 0008
14:18:43 Msec=0  True Az=152.85  Ze=6.51  Az status=0009  Ze status=0008
14:18:44 Check angles
14:18:44 SkyScan query
14:18:44 SkyScan query done: ret=0  az=135.375<-9025  ze=6.495<-11567  Statuses=0009 0008
14:18:44 Msec=750  True Az=135.375  Ze=6.495  Az status=0009  Ze status=0008
14:18:44 Check angles
14:18:44 SkyScan query
14:18:45 SkyScan query done: ret=0  az=117.645<-7843  ze=6.495<-11567  Statuses=0009 0008
14:18:45 Msec=1500  True Az=117.645  Ze=6.495  Az status=0009  Ze status=0008
14:18:45 Check angles
14:18:45 SkyScan query
14:18:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:18:46 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:18:46 Message to Master queued w/err=0: serial=196329 error=0
14:18:51 Received message from Master: op=Filter serial=196330
14:18:51 Color wheel filter change from 0 to 0
14:18:51 FLIGetFilterPos err=0  currentPosition=0
14:18:51 FLIGetStepsRemaining err=0  RemainingSteps=0
14:18:51 Filter is already there-color wheel unchanged
14:18:51 Received message from Master: op=Shutter serial=196331
14:18:51 Shutter LASER close
14:18:51 Received message from Camera: op=State serial=196333
14:18:51 GetSingleValue result=40  Value=cccccccc
14:18:51 SkyScan query
14:18:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:18:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:18:51 Parameters OK
14:18:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:18:51 Set A/D data flow result=40
14:18:51 Set A/D channel type result=40
14:18:51 Set A/D encoding result=40
14:18:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:18:51 Set channel filter=0.000000e+000  result=40
14:18:51 Config A/D  Result=40
14:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:18:51 Get A/D filter: -9.255963e+061  result=40
14:18:51 Get A/D value=-858993460  result=40
14:18:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:18:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:18:51 Parameters OK
14:18:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:18:51 Set A/D data flow result=40
14:18:51 Set A/D channel type result=40
14:18:51 Set A/D encoding result=40
14:18:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:18:51 Set channel filter=0.000000e+000  result=40
14:18:51 Config A/D  Result=40
14:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:18:51 Get A/D filter: -9.255963e+061  result=40
14:18:51 Get A/D value=-858993460  result=40
14:18:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:18:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:18:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:18:51 Aux=
14:18:51 Message to Camera, serial 196333 queued
14:19:28 Received message from Master: op=PointingHead serial=196346
14:19:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:19:28 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:19:29 Point started: ret=0
14:19:29 point_skyscan result=0
14:19:29 Check angles
14:19:29 SkyScan query
14:19:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.46<-13564  Statuses=0008 0009
14:19:30 Msec=0  True Az=112.995  Ze=-23.46  Az status=0008  Ze status=0009
14:19:30 Check angles
14:19:30 SkyScan query
14:19:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
14:19:31 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
14:19:31 Check angles
14:19:31 SkyScan query
14:19:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.37<-16358  Statuses=0008 0009
14:19:31 Msec=1500  True Az=112.995  Ze=-65.37  Az status=0008  Ze status=0009
14:19:32 Check angles
14:19:32 SkyScan query
14:19:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.325<-17755  Statuses=0008 0009
14:19:32 Msec=2250  True Az=112.995  Ze=-86.325  Az status=0008  Ze status=0009
14:19:32 Check angles
14:19:32 SkyScan query
14:19:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.28<-19152  Statuses=0008 0009
14:19:33 Msec=3000  True Az=112.995  Ze=-107.28  Az status=0008  Ze status=0009
14:19:33 Check angles
14:19:33 SkyScan query
14:19:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.64<-20576  Statuses=0008 0009
14:19:34 Msec=3750  True Az=112.995  Ze=-128.64  Az status=0008  Ze status=0009
14:19:34 Check angles
14:19:34 SkyScan query
14:19:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.61<-21974  Statuses=0008 0009
14:19:34 Msec=4500  True Az=112.995  Ze=-149.61  Az status=0008  Ze status=0009
14:19:35 Check angles
14:19:35 SkyScan query
14:19:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.55<-23370  Statuses=0008 0009
14:19:35 Msec=5250  True Az=112.995  Ze=-170.55  Az status=0008  Ze status=0009
14:19:35 Check angles
14:19:35 SkyScan query
14:19:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:19:36 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:19:36 Message to Master queued w/err=0: serial=196346 error=0
14:19:41 Received message from Master: op=Filter serial=196347
14:19:41 Color wheel filter change from 0 to 0
14:19:41 FLIGetFilterPos err=0  currentPosition=0
14:19:41 FLIGetStepsRemaining err=0  RemainingSteps=0
14:19:41 Filter is already there-color wheel unchanged
14:19:41 Received message from Master: op=Shutter serial=196348
14:19:41 Shutter LASER open
14:19:41 Received message from Camera: op=State serial=196350
14:19:41 GetSingleValue result=40  Value=cccccccc
14:19:41 SkyScan query
14:19:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:19:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:19:42 Parameters OK
14:19:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:19:42 Set A/D data flow result=40
14:19:42 Set A/D channel type result=40
14:19:42 Set A/D encoding result=40
14:19:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:19:42 Set channel filter=0.000000e+000  result=40
14:19:42 Config A/D  Result=40
14:19:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:19:42 Get A/D filter: -9.255963e+061  result=40
14:19:42 Get A/D value=-858993460  result=40
14:19:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:19:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:19:42 Parameters OK
14:19:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:19:42 Set A/D data flow result=40
14:19:42 Set A/D channel type result=40
14:19:42 Set A/D encoding result=40
14:19:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:19:42 Set channel filter=0.000000e+000  result=40
14:19:42 Config A/D  Result=40
14:19:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:19:42 Get A/D filter: -9.255963e+061  result=40
14:19:42 Get A/D value=-858993460  result=40
14:19:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:19:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:19:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:19:42 Aux=
14:19:42 Message to Camera, serial 196350 queued
14:19:50 Received message from Master: op=Shutter serial=196360
14:19:50 Shutter LASER close
14:19:51 Received message from Master: op=PointingHead serial=196364
14:19:51 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:19:51 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:19:51 Point started: ret=0
14:19:51 point_skyscan result=0
14:19:52 Check angles
14:19:52 SkyScan query
14:19:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.355<-21557  Statuses=0008 0009
14:19:52 Msec=0  True Az=112.995  Ze=-143.355  Az status=0008  Ze status=0009
14:19:53 Check angles
14:19:53 SkyScan query
14:19:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.385<-20159  Statuses=0008 0009
14:19:53 Msec=750  True Az=112.995  Ze=-122.385  Az status=0008  Ze status=0009
14:19:53 Check angles
14:19:53 SkyScan query
14:19:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.43<-18762  Statuses=0008 0009
14:19:54 Msec=1500  True Az=112.995  Ze=-101.43  Az status=0008  Ze status=0009
14:19:54 Check angles
14:19:54 SkyScan query
14:19:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.37<-17358  Statuses=0008 0009
14:19:55 Msec=2250  True Az=112.995  Ze=-80.37  Az status=0008  Ze status=0009
14:19:55 Check angles
14:19:55 SkyScan query
14:19:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.55<-15970  Statuses=0008 0009
14:19:55 Msec=3000  True Az=112.995  Ze=-59.55  Az status=0008  Ze status=0009
14:19:56 Check angles
14:19:56 SkyScan query
14:19:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.115<-14541  Statuses=0008 0009
14:19:56 Msec=3750  True Az=112.995  Ze=-38.115  Az status=0008  Ze status=0009
14:19:56 Check angles
14:19:56 SkyScan query
14:19:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.19<-13146  Statuses=0008 0009
14:19:57 Msec=4500  True Az=112.995  Ze=-17.19  Az status=0008  Ze status=0009
14:19:57 Check angles
14:19:57 SkyScan query
14:19:58 SkyScan query done: ret=0  az=112.995<-7533  ze=3.765<-11749  Statuses=0008 0009
14:19:58 Msec=5250  True Az=112.995  Ze=3.765  Az status=0008  Ze status=0009
14:19:58 Check angles
14:19:58 SkyScan query
14:19:58 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:19:58 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:19:58 Message to Master queued w/err=0: serial=196364 error=0
14:20:03 Received message from Master: op=Filter serial=196365
14:20:03 Color wheel filter change from 0 to 0
14:20:03 FLIGetFilterPos err=0  currentPosition=0
14:20:03 FLIGetStepsRemaining err=0  RemainingSteps=0
14:20:03 Filter is already there-color wheel unchanged
14:20:04 Received message from Master: op=Shutter serial=196366
14:20:04 Shutter LASER close
14:20:04 Received message from Camera: op=State serial=196368
14:20:04 GetSingleValue result=40  Value=cccccccc
14:20:04 SkyScan query
14:20:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:20:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:20:04 Parameters OK
14:20:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:20:04 Set A/D data flow result=40
14:20:04 Set A/D channel type result=40
14:20:04 Set A/D encoding result=40
14:20:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:20:04 Set channel filter=0.000000e+000  result=40
14:20:04 Config A/D  Result=40
14:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:20:04 Get A/D filter: -9.255963e+061  result=40
14:20:04 Get A/D value=-858993460  result=40
14:20:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:20:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:20:04 Parameters OK
14:20:04 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:20:04 Set A/D data flow result=40
14:20:04 Set A/D channel type result=40
14:20:04 Set A/D encoding result=40
14:20:04 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:20:04 Set channel filter=0.000000e+000  result=40
14:20:04 Config A/D  Result=40
14:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:20:04 Get A/D filter: -9.255963e+061  result=40
14:20:04 Get A/D value=-858993460  result=40
14:20:04 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:20:04 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:20:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:20:04 Aux=
14:20:04 Message to Camera, serial 196368 queued
14:20:40 Received message from Master: op=PointingHead serial=196380
14:20:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:20:40 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:20:41 Point started: ret=0
14:20:41 point_skyscan result=0
14:20:41 Check angles
14:20:41 SkyScan query
14:20:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:20:42 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:20:42 Message to Master queued w/err=0: serial=196380 error=0
14:20:47 Received message from Master: op=Filter serial=196381
14:20:47 Color wheel filter change from 0 to 0
14:20:47 FLIGetFilterPos err=0  currentPosition=0
14:20:47 FLIGetStepsRemaining err=0  RemainingSteps=0
14:20:47 Filter is already there-color wheel unchanged
14:20:47 Received message from Master: op=Shutter serial=196382
14:20:47 Shutter LASER close
14:20:47 Received message from Camera: op=State serial=196384
14:20:47 GetSingleValue result=40  Value=cccccccc
14:20:47 SkyScan query
14:20:48 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:20:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:20:48 Parameters OK
14:20:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:20:48 Set A/D data flow result=40
14:20:48 Set A/D channel type result=40
14:20:48 Set A/D encoding result=40
14:20:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:20:48 Set channel filter=0.000000e+000  result=40
14:20:48 Config A/D  Result=40
14:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:20:48 Get A/D filter: -9.255963e+061  result=40
14:20:48 Get A/D value=-858993460  result=40
14:20:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:20:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:20:48 Parameters OK
14:20:48 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:20:48 Set A/D data flow result=40
14:20:48 Set A/D channel type result=40
14:20:48 Set A/D encoding result=40
14:20:48 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:20:48 Set channel filter=0.000000e+000  result=40
14:20:48 Config A/D  Result=40
14:20:48 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:20:48 Get A/D filter: -9.255963e+061  result=40
14:20:48 Get A/D value=-858993460  result=40
14:20:48 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:20:48 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:20:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:20:48 Aux=
14:20:48 Message to Camera, serial 196384 queued
14:21:25 Received message from Master: op=PointingHead serial=196397
14:21:25 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:21:25 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:21:25 Point started: ret=0
14:21:25 point_skyscan result=0
14:21:26 Check angles
14:21:26 SkyScan query
14:21:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:21:26 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:21:26 Message to Master queued w/err=0: serial=196397 error=0
14:21:31 Received message from Master: op=Filter serial=196398
14:21:31 Color wheel filter change from 0 to 0
14:21:31 FLIGetFilterPos err=0  currentPosition=0
14:21:31 FLIGetStepsRemaining err=0  RemainingSteps=0
14:21:31 Filter is already there-color wheel unchanged
14:21:31 Received message from Master: op=Shutter serial=196399
14:21:31 Shutter LASER close
14:21:31 Received message from Camera: op=State serial=196401
14:21:31 GetSingleValue result=40  Value=cccccccc
14:21:31 SkyScan query
14:21:32 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:21:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:21:32 Parameters OK
14:21:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:21:32 Set A/D data flow result=40
14:21:32 Set A/D channel type result=40
14:21:32 Set A/D encoding result=40
14:21:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:21:32 Set channel filter=0.000000e+000  result=40
14:21:32 Config A/D  Result=40
14:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:21:32 Get A/D filter: -9.255963e+061  result=40
14:21:32 Get A/D value=-858993460  result=40
14:21:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:21:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:21:32 Parameters OK
14:21:32 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:21:32 Set A/D data flow result=40
14:21:32 Set A/D channel type result=40
14:21:32 Set A/D encoding result=40
14:21:32 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:21:32 Set channel filter=0.000000e+000  result=40
14:21:32 Config A/D  Result=40
14:21:32 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:21:32 Get A/D filter: -9.255963e+061  result=40
14:21:32 Get A/D value=-858993460  result=40
14:21:32 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:21:32 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:21:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:21:32 Aux=
14:21:32 Message to Camera, serial 196401 queued
14:22:09 Received message from Master: op=PointingHead serial=196414
14:22:09 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:22:09 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:22:09 Point started: ret=0
14:22:09 point_skyscan result=0
14:22:10 Check angles
14:22:10 SkyScan query
14:22:11 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:22:11 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:22:11 Message to Master queued w/err=0: serial=196414 error=0
14:22:16 Received message from Master: op=Filter serial=196415
14:22:16 Color wheel filter change from 0 to 0
14:22:16 FLIGetFilterPos err=0  currentPosition=0
14:22:16 FLIGetStepsRemaining err=0  RemainingSteps=0
14:22:16 Filter is already there-color wheel unchanged
14:22:16 Received message from Master: op=Shutter serial=196416
14:22:16 Shutter LASER close
14:22:16 Received message from Camera: op=State serial=196418
14:22:16 GetSingleValue result=40  Value=cccccccc
14:22:16 SkyScan query
14:22:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:22:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:22:16 Parameters OK
14:22:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:22:16 Set A/D data flow result=40
14:22:16 Set A/D channel type result=40
14:22:16 Set A/D encoding result=40
14:22:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:22:16 Set channel filter=0.000000e+000  result=40
14:22:16 Config A/D  Result=40
14:22:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:22:16 Get A/D filter: -9.255963e+061  result=40
14:22:16 Get A/D value=-858993460  result=40
14:22:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:22:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:22:16 Parameters OK
14:22:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:22:16 Set A/D data flow result=40
14:22:16 Set A/D channel type result=40
14:22:16 Set A/D encoding result=40
14:22:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:22:16 Set channel filter=0.000000e+000  result=40
14:22:16 Config A/D  Result=40
14:22:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:22:16 Get A/D filter: -9.255963e+061  result=40
14:22:16 Get A/D value=-858993460  result=40
14:22:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:22:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:22:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:22:16 Aux=
14:22:16 Message to Camera, serial 196418 queued
14:22:53 Received message from Master: op=PointingHead serial=196431
14:22:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:22:53 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:22:53 Point started: ret=0
14:22:53 point_skyscan result=0
14:22:54 Check angles
14:22:54 SkyScan query
14:22:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.58<-13572  Statuses=0008 0009
14:22:55 Msec=0  True Az=112.995  Ze=-23.58  Az status=0008  Ze status=0009
14:22:55 Check angles
14:22:55 SkyScan query
14:22:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.97<-14998  Statuses=0008 0009
14:22:56 Msec=750  True Az=112.995  Ze=-44.97  Az status=0008  Ze status=0009
14:22:56 Check angles
14:22:56 SkyScan query
14:22:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.925<-16395  Statuses=0008 0009
14:22:56 Msec=1500  True Az=112.995  Ze=-65.925  Az status=0008  Ze status=0009
14:22:57 Check angles
14:22:57 SkyScan query
14:22:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.865<-17791  Statuses=0008 0009
14:22:57 Msec=2250  True Az=112.995  Ze=-86.865  Az status=0008  Ze status=0009
14:22:57 Check angles
14:22:57 SkyScan query
14:22:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.835<-19189  Statuses=0008 0009
14:22:58 Msec=3000  True Az=112.995  Ze=-107.835  Az status=0008  Ze status=0009
14:22:58 Check angles
14:22:58 SkyScan query
14:22:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.76<-20584  Statuses=0008 0009
14:22:59 Msec=3750  True Az=112.995  Ze=-128.76  Az status=0008  Ze status=0009
14:22:59 Check angles
14:22:59 SkyScan query
14:22:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.18<-22012  Statuses=0008 0009
14:22:59 Msec=4500  True Az=112.995  Ze=-150.18  Az status=0008  Ze status=0009
14:23:00 Check angles
14:23:00 SkyScan query
14:23:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-171<-23400  Statuses=0008 0009
14:23:00 Msec=5250  True Az=112.995  Ze=-171  Az status=0008  Ze status=0009
14:23:00 Check angles
14:23:00 SkyScan query
14:23:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:23:01 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:23:01 Message to Master queued w/err=0: serial=196431 error=0
14:23:06 Received message from Master: op=Filter serial=196432
14:23:06 Color wheel filter change from 0 to 0
14:23:06 FLIGetFilterPos err=0  currentPosition=0
14:23:06 FLIGetStepsRemaining err=0  RemainingSteps=0
14:23:06 Filter is already there-color wheel unchanged
14:23:06 Received message from Master: op=Shutter serial=196433
14:23:06 Shutter LASER open
14:23:06 Received message from Camera: op=State serial=196435
14:23:06 GetSingleValue result=40  Value=cccccccc
14:23:06 SkyScan query
14:23:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:23:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:23:07 Parameters OK
14:23:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:23:07 Set A/D data flow result=40
14:23:07 Set A/D channel type result=40
14:23:07 Set A/D encoding result=40
14:23:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:23:07 Set channel filter=0.000000e+000  result=40
14:23:07 Config A/D  Result=40
14:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:23:07 Get A/D filter: -9.255963e+061  result=40
14:23:07 Get A/D value=-858993460  result=40
14:23:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:23:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:23:07 Parameters OK
14:23:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:23:07 Set A/D data flow result=40
14:23:07 Set A/D channel type result=40
14:23:07 Set A/D encoding result=40
14:23:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:23:07 Set channel filter=0.000000e+000  result=40
14:23:07 Config A/D  Result=40
14:23:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:23:07 Get A/D filter: -9.255963e+061  result=40
14:23:07 Get A/D value=-858993460  result=40
14:23:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:23:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:23:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:23:07 Aux=
14:23:07 Message to Camera, serial 196435 queued
14:23:14 Received message from Master: op=Shutter serial=196444
14:23:14 Shutter LASER close
14:23:15 Received message from Master: op=PointingHead serial=196448
14:23:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:23:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:23:15 Point started: ret=0
14:23:15 point_skyscan result=0
14:23:16 Check angles
14:23:16 SkyScan query
14:23:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.145<-21543  Statuses=0008 0009
14:23:17 Msec=0  True Az=112.995  Ze=-143.145  Az status=0008  Ze status=0009
14:23:17 Check angles
14:23:17 SkyScan query
14:23:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.725<-20115  Statuses=0008 0009
14:23:17 Msec=750  True Az=112.995  Ze=-121.725  Az status=0008  Ze status=0009
14:23:18 Check angles
14:23:18 SkyScan query
14:23:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.365<-18691  Statuses=0008 0009
14:23:18 Msec=1500  True Az=112.995  Ze=-100.365  Az status=0008  Ze status=0009
14:23:18 Check angles
14:23:18 SkyScan query
14:23:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.395<-17293  Statuses=0008 0009
14:23:19 Msec=2250  True Az=112.995  Ze=-79.395  Az status=0008  Ze status=0009
14:23:19 Check angles
14:23:19 SkyScan query
14:23:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.44<-15896  Statuses=0008 0009
14:23:20 Msec=3000  True Az=112.995  Ze=-58.44  Az status=0008  Ze status=0009
14:23:20 Check angles
14:23:20 SkyScan query
14:23:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.53<-14502  Statuses=0008 0009
14:23:20 Msec=3750  True Az=112.995  Ze=-37.53  Az status=0008  Ze status=0009
14:23:21 Check angles
14:23:21 SkyScan query
14:23:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.515<-13101  Statuses=0008 0009
14:23:21 Msec=4500  True Az=112.995  Ze=-16.515  Az status=0008  Ze status=0009
14:23:21 Check angles
14:23:21 SkyScan query
14:23:22 SkyScan query done: ret=0  az=112.995<-7533  ze=4.68<-11688  Statuses=0008 0009
14:23:22 Msec=5250  True Az=112.995  Ze=4.68  Az status=0008  Ze status=0009
14:23:22 Check angles
14:23:22 SkyScan query
14:23:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:23:23 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:23:23 Message to Master queued w/err=0: serial=196448 error=0
14:23:28 Received message from Master: op=Filter serial=196449
14:23:28 Color wheel filter change from 0 to 0
14:23:28 FLIGetFilterPos err=0  currentPosition=0
14:23:28 FLIGetStepsRemaining err=0  RemainingSteps=0
14:23:28 Filter is already there-color wheel unchanged
14:23:28 Received message from Master: op=Shutter serial=196450
14:23:28 Shutter LASER close
14:23:28 Received message from Camera: op=State serial=196452
14:23:28 GetSingleValue result=40  Value=cccccccc
14:23:28 SkyScan query
14:23:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:23:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:23:29 Parameters OK
14:23:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:23:29 Set A/D data flow result=40
14:23:29 Set A/D channel type result=40
14:23:29 Set A/D encoding result=40
14:23:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:23:29 Set channel filter=0.000000e+000  result=40
14:23:29 Config A/D  Result=40
14:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:23:29 Get A/D filter: -9.255963e+061  result=40
14:23:29 Get A/D value=-858993460  result=40
14:23:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:23:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:23:29 Parameters OK
14:23:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:23:29 Set A/D data flow result=40
14:23:29 Set A/D channel type result=40
14:23:29 Set A/D encoding result=40
14:23:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:23:29 Set channel filter=0.000000e+000  result=40
14:23:29 Config A/D  Result=40
14:23:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:23:29 Get A/D filter: -9.255963e+061  result=40
14:23:29 Get A/D value=-858993460  result=40
14:23:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:23:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:23:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:23:29 Aux=
14:23:29 Message to Camera, serial 196452 queued
[UTC 2019-3-9  14:23:48]
14:24:05 Received message from Master: op=PointingHead serial=196465
14:24:05 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:24:05 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:24:06 Point started: ret=0
14:24:06 point_skyscan result=0
14:24:06 Check angles
14:24:06 SkyScan query
14:24:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:24:07 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:24:07 Message to Master queued w/err=0: serial=196465 error=0
14:24:12 Received message from Master: op=Filter serial=196466
14:24:12 Color wheel filter change from 0 to 0
14:24:12 FLIGetFilterPos err=0  currentPosition=0
14:24:12 FLIGetStepsRemaining err=0  RemainingSteps=0
14:24:12 Filter is already there-color wheel unchanged
14:24:12 Received message from Master: op=Shutter serial=196467
14:24:12 Shutter LASER close
14:24:12 Received message from Camera: op=State serial=196469
14:24:12 GetSingleValue result=40  Value=cccccccc
14:24:12 SkyScan query
14:24:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:24:13 Parameters OK
14:24:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:24:13 Set A/D data flow result=40
14:24:13 Set A/D channel type result=40
14:24:13 Set A/D encoding result=40
14:24:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:24:13 Set channel filter=0.000000e+000  result=40
14:24:13 Config A/D  Result=40
14:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:24:13 Get A/D filter: -9.255963e+061  result=40
14:24:13 Get A/D value=-858993460  result=40
14:24:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:24:13 Parameters OK
14:24:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:24:13 Set A/D data flow result=40
14:24:13 Set A/D channel type result=40
14:24:13 Set A/D encoding result=40
14:24:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:24:13 Set channel filter=0.000000e+000  result=40
14:24:13 Config A/D  Result=40
14:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:24:13 Get A/D filter: -9.255963e+061  result=40
14:24:13 Get A/D value=-858993460  result=40
14:24:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:24:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:24:13 Aux=
14:24:13 Message to Camera, serial 196469 queued
14:24:50 Received message from Master: op=PointingHead serial=196482
14:24:50 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:24:50 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:24:50 Point started: ret=0
14:24:50 point_skyscan result=0
14:24:51 Check angles
14:24:51 SkyScan query
14:24:51 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
14:24:51 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
14:24:52 Check angles
14:24:52 SkyScan query
14:24:52 SkyScan query done: ret=0  az=153.48<-10232  ze=-6.495<-12433  Statuses=0009 0008
14:24:52 Msec=750  True Az=153.48  Ze=-6.495  Az status=0009  Ze status=0008
14:24:52 Check angles
14:24:52 SkyScan query
14:24:53 SkyScan query done: ret=0  az=170.955<-11397  ze=-6.495<-12433  Statuses=0009 0008
14:24:53 Msec=1500  True Az=170.955  Ze=-6.495  Az status=0009  Ze status=0008
14:24:53 Check angles
14:24:53 SkyScan query
14:24:54 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:24:54 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:24:54 Message to Master queued w/err=0: serial=196482 error=0
14:24:59 Received message from Master: op=Filter serial=196483
14:24:59 Color wheel filter change from 0 to 0
14:24:59 FLIGetFilterPos err=0  currentPosition=0
14:24:59 FLIGetStepsRemaining err=0  RemainingSteps=0
14:24:59 Filter is already there-color wheel unchanged
14:24:59 Received message from Master: op=Shutter serial=196484
14:24:59 Shutter LASER close
14:24:59 Received message from Camera: op=State serial=196486
14:24:59 GetSingleValue result=40  Value=cccccccc
14:24:59 SkyScan query
14:24:59 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:24:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:24:59 Parameters OK
14:24:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:24:59 Set A/D data flow result=40
14:24:59 Set A/D channel type result=40
14:24:59 Set A/D encoding result=40
14:24:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:24:59 Set channel filter=0.000000e+000  result=40
14:24:59 Config A/D  Result=40
14:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:24:59 Get A/D filter: -9.255963e+061  result=40
14:24:59 Get A/D value=-858993460  result=40
14:24:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:24:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:24:59 Parameters OK
14:24:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:24:59 Set A/D data flow result=40
14:24:59 Set A/D channel type result=40
14:24:59 Set A/D encoding result=40
14:24:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:24:59 Set channel filter=0.000000e+000  result=40
14:24:59 Config A/D  Result=40
14:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:24:59 Get A/D filter: -9.255963e+061  result=40
14:24:59 Get A/D value=-858993460  result=40
14:24:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:24:59 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:24:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:24:59 Aux=
14:24:59 Message to Camera, serial 196486 queued
14:25:36 Received message from Master: op=PointingHead serial=196499
14:25:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:25:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:25:37 Point started: ret=0
14:25:37 point_skyscan result=0
14:25:37 Check angles
14:25:37 SkyScan query
14:25:38 SkyScan query done: ret=0  az=152.415<-10161  ze=6.51<-11566  Statuses=0009 0008
14:25:38 Msec=0  True Az=152.415  Ze=6.51  Az status=0009  Ze status=0008
14:25:38 Check angles
14:25:38 SkyScan query
14:25:39 SkyScan query done: ret=0  az=135.06<-9004  ze=6.495<-11567  Statuses=0009 0008
14:25:39 Msec=750  True Az=135.06  Ze=6.495  Az status=0009  Ze status=0008
14:25:39 Check angles
14:25:39 SkyScan query
14:25:40 SkyScan query done: ret=0  az=117.27<-7818  ze=6.495<-11567  Statuses=0009 0008
14:25:40 Msec=1500  True Az=117.27  Ze=6.495  Az status=0009  Ze status=0008
14:25:40 Check angles
14:25:40 SkyScan query
14:25:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:25:40 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:25:40 Message to Master queued w/err=0: serial=196499 error=0
14:25:45 Received message from Master: op=Filter serial=196500
14:25:45 Color wheel filter change from 0 to 0
14:25:45 FLIGetFilterPos err=0  currentPosition=0
14:25:45 FLIGetStepsRemaining err=0  RemainingSteps=0
14:25:45 Filter is already there-color wheel unchanged
14:25:45 Received message from Master: op=Shutter serial=196501
14:25:45 Shutter LASER close
14:25:45 Received message from Camera: op=State serial=196503
14:25:45 GetSingleValue result=40  Value=cccccccc
14:25:45 SkyScan query
14:25:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:25:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:25:46 Parameters OK
14:25:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:25:46 Set A/D data flow result=40
14:25:46 Set A/D channel type result=40
14:25:46 Set A/D encoding result=40
14:25:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:25:46 Set channel filter=0.000000e+000  result=40
14:25:46 Config A/D  Result=40
14:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:25:46 Get A/D filter: -9.255963e+061  result=40
14:25:46 Get A/D value=-858993460  result=40
14:25:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:25:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:25:46 Parameters OK
14:25:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:25:46 Set A/D data flow result=40
14:25:46 Set A/D channel type result=40
14:25:46 Set A/D encoding result=40
14:25:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:25:46 Set channel filter=0.000000e+000  result=40
14:25:46 Config A/D  Result=40
14:25:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:25:46 Get A/D filter: -9.255963e+061  result=40
14:25:46 Get A/D value=-858993460  result=40
14:25:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:25:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:25:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:25:46 Aux=
14:25:46 Message to Camera, serial 196503 queued
14:26:23 Received message from Master: op=PointingHead serial=196516
14:26:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:26:23 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:26:23 Point started: ret=0
14:26:23 point_skyscan result=0
14:26:24 Check angles
14:26:24 SkyScan query
14:26:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.325<-13555  Statuses=0008 0009
14:26:25 Msec=0  True Az=112.995  Ze=-23.325  Az status=0008  Ze status=0009
14:26:25 Check angles
14:26:25 SkyScan query
14:26:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.295<-14953  Statuses=0008 0009
14:26:25 Msec=750  True Az=112.995  Ze=-44.295  Az status=0008  Ze status=0009
14:26:25 Check angles
14:26:25 SkyScan query
14:26:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.22<-16348  Statuses=0008 0009
14:26:26 Msec=1500  True Az=112.995  Ze=-65.22  Az status=0008  Ze status=0009
14:26:26 Check angles
14:26:26 SkyScan query
14:26:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.205<-17747  Statuses=0008 0009
14:26:27 Msec=2250  True Az=112.995  Ze=-86.205  Az status=0008  Ze status=0009
14:26:27 Check angles
14:26:27 SkyScan query
14:26:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.13<-19142  Statuses=0008 0009
14:26:28 Msec=3000  True Az=112.995  Ze=-107.13  Az status=0008  Ze status=0009
14:26:28 Check angles
14:26:28 SkyScan query
14:26:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.085<-20539  Statuses=0008 0009
14:26:28 Msec=3750  True Az=112.995  Ze=-128.085  Az status=0008  Ze status=0009
14:26:28 Check angles
14:26:28 SkyScan query
14:26:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.055<-21937  Statuses=0008 0009
14:26:29 Msec=4500  True Az=112.995  Ze=-149.055  Az status=0008  Ze status=0009
14:26:29 Check angles
14:26:29 SkyScan query
14:26:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.995<-23333  Statuses=0008 0009
14:26:30 Msec=5250  True Az=112.995  Ze=-169.995  Az status=0008  Ze status=0009
14:26:30 Check angles
14:26:30 SkyScan query
14:26:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:26:31 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:26:31 Message to Master queued w/err=0: serial=196516 error=0
14:26:36 Received message from Master: op=Filter serial=196517
14:26:36 Color wheel filter change from 0 to 0
14:26:36 FLIGetFilterPos err=0  currentPosition=0
14:26:36 FLIGetStepsRemaining err=0  RemainingSteps=0
14:26:36 Filter is already there-color wheel unchanged
14:26:36 Received message from Master: op=Shutter serial=196518
14:26:36 Shutter LASER open
14:26:36 Received message from Camera: op=State serial=196520
14:26:36 GetSingleValue result=40  Value=cccccccc
14:26:36 SkyScan query
14:26:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:26:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:26:36 Parameters OK
14:26:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:26:36 Set A/D data flow result=40
14:26:36 Set A/D channel type result=40
14:26:36 Set A/D encoding result=40
14:26:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:26:36 Set channel filter=0.000000e+000  result=40
14:26:36 Config A/D  Result=40
14:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:26:36 Get A/D filter: -9.255963e+061  result=40
14:26:36 Get A/D value=-858993460  result=40
14:26:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:26:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:26:36 Parameters OK
14:26:36 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:26:36 Set A/D data flow result=40
14:26:36 Set A/D channel type result=40
14:26:36 Set A/D encoding result=40
14:26:36 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:26:36 Set channel filter=0.000000e+000  result=40
14:26:36 Config A/D  Result=40
14:26:36 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:26:36 Get A/D filter: -9.255963e+061  result=40
14:26:36 Get A/D value=-858993460  result=40
14:26:36 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:26:36 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:26:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:26:36 Aux=
14:26:36 Message to Camera, serial 196520 queued
14:26:45 Received message from Master: op=Shutter serial=196530
14:26:45 Shutter LASER close
14:26:45 Received message from Master: op=PointingHead serial=196534
14:26:45 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:26:45 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:26:46 Point started: ret=0
14:26:46 point_skyscan result=0
14:26:46 Check angles
14:26:46 SkyScan query
14:26:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.04<-21536  Statuses=0008 0009
14:26:47 Msec=0  True Az=112.995  Ze=-143.04  Az status=0008  Ze status=0009
14:26:47 Check angles
14:26:47 SkyScan query
14:26:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.635<-20109  Statuses=0008 0009
14:26:48 Msec=750  True Az=112.995  Ze=-121.635  Az status=0008  Ze status=0009
14:26:48 Check angles
14:26:48 SkyScan query
14:26:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.695<-18713  Statuses=0008 0009
14:26:49 Msec=1500  True Az=112.995  Ze=-100.695  Az status=0008  Ze status=0009
14:26:49 Check angles
14:26:49 SkyScan query
14:26:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.74<-17316  Statuses=0008 0009
14:26:49 Msec=2250  True Az=112.995  Ze=-79.74  Az status=0008  Ze status=0009
14:26:49 Check angles
14:26:49 SkyScan query
14:26:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.8<-15920  Statuses=0008 0009
14:26:50 Msec=3000  True Az=112.995  Ze=-58.8  Az status=0008  Ze status=0009
14:26:50 Check angles
14:26:50 SkyScan query
14:26:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.83<-14522  Statuses=0008 0009
14:26:51 Msec=3750  True Az=112.995  Ze=-37.83  Az status=0008  Ze status=0009
14:26:51 Check angles
14:26:51 SkyScan query
14:26:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.86<-13124  Statuses=0008 0009
14:26:52 Msec=4500  True Az=112.995  Ze=-16.86  Az status=0008  Ze status=0009
14:26:52 Check angles
14:26:52 SkyScan query
14:26:52 SkyScan query done: ret=0  az=112.995<-7533  ze=4.065<-11729  Statuses=0008 0009
14:26:52 Msec=5250  True Az=112.995  Ze=4.065  Az status=0008  Ze status=0009
14:26:52 Check angles
14:26:52 SkyScan query
14:26:53 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:26:53 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:26:53 Message to Master queued w/err=0: serial=196534 error=0
14:26:58 Received message from Master: op=Filter serial=196535
14:26:58 Color wheel filter change from 0 to 0
14:26:58 FLIGetFilterPos err=0  currentPosition=0
14:26:58 FLIGetStepsRemaining err=0  RemainingSteps=0
14:26:58 Filter is already there-color wheel unchanged
14:26:58 Received message from Master: op=Shutter serial=196536
14:26:58 Shutter LASER close
14:26:58 Received message from Camera: op=State serial=196538
14:26:58 GetSingleValue result=40  Value=cccccccc
14:26:58 SkyScan query
14:26:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:26:59 Parameters OK
14:26:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:26:59 Set A/D data flow result=40
14:26:59 Set A/D channel type result=40
14:26:59 Set A/D encoding result=40
14:26:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:26:59 Set channel filter=0.000000e+000  result=40
14:26:59 Config A/D  Result=40
14:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:26:59 Get A/D filter: -9.255963e+061  result=40
14:26:59 Get A/D value=-858993460  result=40
14:26:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:26:59 Parameters OK
14:26:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:26:59 Set A/D data flow result=40
14:26:59 Set A/D channel type result=40
14:26:59 Set A/D encoding result=40
14:26:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:26:59 Set channel filter=0.000000e+000  result=40
14:26:59 Config A/D  Result=40
14:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:26:59 Get A/D filter: -9.255963e+061  result=40
14:26:59 Get A/D value=-858993460  result=40
14:26:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:26:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:26:59 Aux=
14:26:59 Message to Camera, serial 196538 queued
14:27:36 Received message from Master: op=PointingHead serial=196551
14:27:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:27:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:27:36 Point started: ret=0
14:27:36 point_skyscan result=0
14:27:37 Check angles
14:27:37 SkyScan query
14:27:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:27:37 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:27:37 Message to Master queued w/err=0: serial=196551 error=0
14:27:42 Received message from Master: op=Filter serial=196552
14:27:42 Color wheel filter change from 0 to 0
14:27:42 FLIGetFilterPos err=0  currentPosition=0
14:27:42 FLIGetStepsRemaining err=0  RemainingSteps=0
14:27:42 Filter is already there-color wheel unchanged
14:27:43 Received message from Master: op=Shutter serial=196553
14:27:43 Shutter LASER close
14:27:43 Received message from Camera: op=State serial=196555
14:27:43 GetSingleValue result=40  Value=cccccccc
14:27:43 SkyScan query
14:27:43 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:27:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:27:43 Parameters OK
14:27:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:27:43 Set A/D data flow result=40
14:27:43 Set A/D channel type result=40
14:27:43 Set A/D encoding result=40
14:27:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:27:43 Set channel filter=0.000000e+000  result=40
14:27:43 Config A/D  Result=40
14:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:27:43 Get A/D filter: -9.255963e+061  result=40
14:27:43 Get A/D value=-858993460  result=40
14:27:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:27:43 Parameters OK
14:27:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:27:43 Set A/D data flow result=40
14:27:43 Set A/D channel type result=40
14:27:43 Set A/D encoding result=40
14:27:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:27:43 Set channel filter=0.000000e+000  result=40
14:27:43 Config A/D  Result=40
14:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:27:43 Get A/D filter: -9.255963e+061  result=40
14:27:43 Get A/D value=-858993460  result=40
14:27:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:27:43 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:27:43 Aux=
14:27:43 Message to Camera, serial 196555 queued
14:28:20 Received message from Master: op=PointingHead serial=196568
14:28:20 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:28:20 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:28:20 Point started: ret=0
14:28:20 point_skyscan result=0
14:28:21 Check angles
14:28:21 SkyScan query
14:28:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:28:22 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:28:22 Message to Master queued w/err=0: serial=196568 error=0
14:28:27 Received message from Master: op=Filter serial=196569
14:28:27 Color wheel filter change from 0 to 0
14:28:27 FLIGetFilterPos err=0  currentPosition=0
14:28:27 FLIGetStepsRemaining err=0  RemainingSteps=0
14:28:27 Filter is already there-color wheel unchanged
14:28:27 Received message from Master: op=Shutter serial=196570
14:28:27 Shutter LASER close
14:28:27 Received message from Camera: op=State serial=196572
14:28:27 GetSingleValue result=40  Value=cccccccc
14:28:27 SkyScan query
14:28:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:28:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:28:28 Parameters OK
14:28:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:28:28 Set A/D data flow result=40
14:28:28 Set A/D channel type result=40
14:28:28 Set A/D encoding result=40
14:28:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:28:28 Set channel filter=0.000000e+000  result=40
14:28:28 Config A/D  Result=40
14:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:28:28 Get A/D filter: -9.255963e+061  result=40
14:28:28 Get A/D value=-858993460  result=40
14:28:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:28:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:28:28 Parameters OK
14:28:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:28:28 Set A/D data flow result=40
14:28:28 Set A/D channel type result=40
14:28:28 Set A/D encoding result=40
14:28:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:28:28 Set channel filter=0.000000e+000  result=40
14:28:28 Config A/D  Result=40
14:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:28:28 Get A/D filter: -9.255963e+061  result=40
14:28:28 Get A/D value=-858993460  result=40
14:28:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:28:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:28:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:28:28 Aux=
14:28:28 Message to Camera, serial 196572 queued
14:29:04 Received message from Master: op=PointingHead serial=196585
14:29:04 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:29:04 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:29:05 Point started: ret=0
14:29:05 point_skyscan result=0
14:29:06 Check angles
14:29:06 SkyScan query
14:29:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:29:06 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:29:06 Message to Master queued w/err=0: serial=196585 error=0
14:29:11 Received message from Master: op=Filter serial=196586
14:29:11 Color wheel filter change from 0 to 0
14:29:11 FLIGetFilterPos err=0  currentPosition=0
14:29:11 FLIGetStepsRemaining err=0  RemainingSteps=0
14:29:11 Filter is already there-color wheel unchanged
14:29:11 Received message from Master: op=Shutter serial=196587
14:29:11 Shutter LASER close
14:29:11 Received message from Camera: op=State serial=196589
14:29:11 GetSingleValue result=40  Value=cccccccc
14:29:11 SkyScan query
14:29:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:29:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:29:12 Parameters OK
14:29:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:29:12 Set A/D data flow result=40
14:29:12 Set A/D channel type result=40
14:29:12 Set A/D encoding result=40
14:29:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:29:12 Set channel filter=0.000000e+000  result=40
14:29:12 Config A/D  Result=40
14:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:29:12 Get A/D filter: -9.255963e+061  result=40
14:29:12 Get A/D value=-858993460  result=40
14:29:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:29:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:29:12 Parameters OK
14:29:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:29:12 Set A/D data flow result=40
14:29:12 Set A/D channel type result=40
14:29:12 Set A/D encoding result=40
14:29:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:29:12 Set channel filter=0.000000e+000  result=40
14:29:12 Config A/D  Result=40
14:29:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:29:12 Get A/D filter: -9.255963e+061  result=40
14:29:12 Get A/D value=-858993460  result=40
14:29:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:29:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:29:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:29:12 Aux=
14:29:12 Message to Camera, serial 196589 queued
14:29:49 Received message from Master: op=PointingHead serial=196602
14:29:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:29:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:29:49 Point started: ret=0
14:29:49 point_skyscan result=0
14:29:50 Check angles
14:29:50 SkyScan query
14:29:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.79<-13586  Statuses=0008 0009
14:29:50 Msec=0  True Az=112.995  Ze=-23.79  Az status=0008  Ze status=0009
14:29:51 Check angles
14:29:51 SkyScan query
14:29:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-45.18<-15012  Statuses=0008 0009
14:29:51 Msec=750  True Az=112.995  Ze=-45.18  Az status=0008  Ze status=0009
14:29:51 Check angles
14:29:51 SkyScan query
14:29:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-66.12<-16408  Statuses=0008 0009
14:29:52 Msec=1500  True Az=112.995  Ze=-66.12  Az status=0008  Ze status=0009
14:29:52 Check angles
14:29:52 SkyScan query
14:29:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-87.18<-17812  Statuses=0008 0009
14:29:53 Msec=2250  True Az=112.995  Ze=-87.18  Az status=0008  Ze status=0009
14:29:53 Check angles
14:29:53 SkyScan query
14:29:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.03<-19202  Statuses=0008 0009
14:29:53 Msec=3000  True Az=112.995  Ze=-108.03  Az status=0008  Ze status=0009
14:29:54 Check angles
14:29:54 SkyScan query
14:29:54 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.97<-20598  Statuses=0008 0009
14:29:54 Msec=3750  True Az=112.995  Ze=-128.97  Az status=0008  Ze status=0009
14:29:54 Check angles
14:29:54 SkyScan query
14:29:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.375<-22025  Statuses=0008 0009
14:29:55 Msec=4500  True Az=112.995  Ze=-150.375  Az status=0008  Ze status=0009
14:29:55 Check angles
14:29:55 SkyScan query
14:29:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.15<-23410  Statuses=0008 0009
14:29:56 Msec=5250  True Az=112.995  Ze=-171.15  Az status=0008  Ze status=0009
14:29:56 Check angles
14:29:56 SkyScan query
14:29:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:29:56 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:29:56 Message to Master queued w/err=0: serial=196602 error=0
14:30:01 Received message from Master: op=Filter serial=196603
14:30:01 Color wheel filter change from 0 to 0
14:30:01 FLIGetFilterPos err=0  currentPosition=0
14:30:01 FLIGetStepsRemaining err=0  RemainingSteps=0
14:30:01 Filter is already there-color wheel unchanged
14:30:02 Received message from Master: op=Shutter serial=196604
14:30:02 Shutter LASER open
14:30:02 Received message from Camera: op=State serial=196606
14:30:02 GetSingleValue result=40  Value=cccccccc
14:30:02 SkyScan query
14:30:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:30:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:30:02 Parameters OK
14:30:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:30:02 Set A/D data flow result=40
14:30:02 Set A/D channel type result=40
14:30:02 Set A/D encoding result=40
14:30:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:30:02 Set channel filter=0.000000e+000  result=40
14:30:02 Config A/D  Result=40
14:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:30:02 Get A/D filter: -9.255963e+061  result=40
14:30:02 Get A/D value=-858993460  result=40
14:30:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:30:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:30:02 Parameters OK
14:30:02 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:30:02 Set A/D data flow result=40
14:30:02 Set A/D channel type result=40
14:30:02 Set A/D encoding result=40
14:30:02 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:30:02 Set channel filter=0.000000e+000  result=40
14:30:02 Config A/D  Result=40
14:30:02 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:30:02 Get A/D filter: -9.255963e+061  result=40
14:30:02 Get A/D value=-858993460  result=40
14:30:02 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:30:02 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:30:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:30:02 Aux=
14:30:02 Message to Camera, serial 196606 queued
14:30:11 Received message from Master: op=Shutter serial=196616
14:30:11 Shutter LASER close
14:30:11 Received message from Master: op=PointingHead serial=196620
14:30:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:30:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:30:12 Point started: ret=0
14:30:12 point_skyscan result=0
14:30:13 Check angles
14:30:13 SkyScan query
14:30:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.875<-21525  Statuses=0008 0009
14:30:13 Msec=0  True Az=112.995  Ze=-142.875  Az status=0008  Ze status=0009
14:30:13 Check angles
14:30:13 SkyScan query
14:30:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.485<-20099  Statuses=0008 0009
14:30:14 Msec=750  True Az=112.995  Ze=-121.485  Az status=0008  Ze status=0009
14:30:14 Check angles
14:30:14 SkyScan query
14:30:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.545<-18703  Statuses=0008 0009
14:30:15 Msec=1500  True Az=112.995  Ze=-100.545  Az status=0008  Ze status=0009
14:30:15 Check angles
14:30:15 SkyScan query
14:30:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.575<-17305  Statuses=0008 0009
14:30:15 Msec=2250  True Az=112.995  Ze=-79.575  Az status=0008  Ze status=0009
14:30:16 Check angles
14:30:16 SkyScan query
14:30:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.17<-15878  Statuses=0008 0009
14:30:16 Msec=3000  True Az=112.995  Ze=-58.17  Az status=0008  Ze status=0009
14:30:16 Check angles
14:30:16 SkyScan query
14:30:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.245<-14483  Statuses=0008 0009
14:30:17 Msec=3750  True Az=112.995  Ze=-37.245  Az status=0008  Ze status=0009
14:30:17 Check angles
14:30:17 SkyScan query
14:30:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.26<-13084  Statuses=0008 0009
14:30:18 Msec=4500  True Az=112.995  Ze=-16.26  Az status=0008  Ze status=0009
14:30:18 Check angles
14:30:18 SkyScan query
14:30:18 SkyScan query done: ret=0  az=112.995<-7533  ze=4.875<-11675  Statuses=0008 0009
14:30:18 Msec=5250  True Az=112.995  Ze=4.875  Az status=0008  Ze status=0009
14:30:19 Check angles
14:30:19 SkyScan query
14:30:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:30:19 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:30:19 Message to Master queued w/err=0: serial=196620 error=0
14:30:24 Received message from Master: op=Filter serial=196621
14:30:24 Color wheel filter change from 0 to 0
14:30:24 FLIGetFilterPos err=0  currentPosition=0
14:30:24 FLIGetStepsRemaining err=0  RemainingSteps=0
14:30:24 Filter is already there-color wheel unchanged
14:30:24 Received message from Master: op=Shutter serial=196622
14:30:24 Shutter LASER close
14:30:25 Received message from Camera: op=State serial=196624
14:30:25 GetSingleValue result=40  Value=cccccccc
14:30:25 SkyScan query
14:30:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:30:25 Parameters OK
14:30:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:30:25 Set A/D data flow result=40
14:30:25 Set A/D channel type result=40
14:30:25 Set A/D encoding result=40
14:30:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:30:25 Set channel filter=0.000000e+000  result=40
14:30:25 Config A/D  Result=40
14:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:30:25 Get A/D filter: -9.255963e+061  result=40
14:30:25 Get A/D value=-858993460  result=40
14:30:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:30:25 Parameters OK
14:30:25 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:30:25 Set A/D data flow result=40
14:30:25 Set A/D channel type result=40
14:30:25 Set A/D encoding result=40
14:30:25 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:30:25 Set channel filter=0.000000e+000  result=40
14:30:25 Config A/D  Result=40
14:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:30:25 Get A/D filter: -9.255963e+061  result=40
14:30:25 Get A/D value=-858993460  result=40
14:30:25 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:30:25 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:30:25 Aux=
14:30:25 Message to Camera, serial 196624 queued
14:31:02 Received message from Master: op=PointingHead serial=196637
14:31:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:31:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:31:02 Point started: ret=0
14:31:02 point_skyscan result=0
14:31:03 Check angles
14:31:03 SkyScan query
14:31:04 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:31:04 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:31:04 Message to Master queued w/err=0: serial=196637 error=0
14:31:09 Received message from Master: op=Filter serial=196638
14:31:09 Color wheel filter change from 0 to 0
14:31:09 FLIGetFilterPos err=0  currentPosition=0
14:31:09 FLIGetStepsRemaining err=0  RemainingSteps=0
14:31:09 Filter is already there-color wheel unchanged
14:31:09 Received message from Master: op=Shutter serial=196639
14:31:09 Shutter LASER close
14:31:09 Received message from Camera: op=State serial=196641
14:31:09 GetSingleValue result=40  Value=cccccccc
14:31:09 SkyScan query
14:31:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:31:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:31:09 Parameters OK
14:31:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:31:09 Set A/D data flow result=40
14:31:09 Set A/D channel type result=40
14:31:09 Set A/D encoding result=40
14:31:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:31:09 Set channel filter=0.000000e+000  result=40
14:31:09 Config A/D  Result=40
14:31:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:31:09 Get A/D filter: -9.255963e+061  result=40
14:31:09 Get A/D value=-858993460  result=40
14:31:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:31:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:31:09 Parameters OK
14:31:09 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:31:09 Set A/D data flow result=40
14:31:09 Set A/D channel type result=40
14:31:09 Set A/D encoding result=40
14:31:09 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:31:09 Set channel filter=0.000000e+000  result=40
14:31:09 Config A/D  Result=40
14:31:09 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:31:09 Get A/D filter: -9.255963e+061  result=40
14:31:09 Get A/D value=-858993460  result=40
14:31:09 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:31:09 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:31:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:31:09 Aux=
14:31:09 Message to Camera, serial 196641 queued
14:31:46 Received message from Master: op=PointingHead serial=196654
14:31:46 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:31:46 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:31:47 Point started: ret=0
14:31:47 point_skyscan result=0
14:31:47 Check angles
14:31:47 SkyScan query
14:31:48 SkyScan query done: ret=0  az=136.14<-9076  ze=-6.51<-12434  Statuses=0009 0008
14:31:48 Msec=0  True Az=136.14  Ze=-6.51  Az status=0009  Ze status=0008
14:31:48 Check angles
14:31:48 SkyScan query
14:31:49 SkyScan query done: ret=0  az=153.645<-10243  ze=-6.495<-12433  Statuses=0009 0008
14:31:49 Msec=750  True Az=153.645  Ze=-6.495  Az status=0009  Ze status=0008
14:31:49 Check angles
14:31:49 SkyScan query
14:31:49 SkyScan query done: ret=0  az=171.015<-11401  ze=-6.495<-12433  Statuses=0009 0008
14:31:49 Msec=1500  True Az=171.015  Ze=-6.495  Az status=0009  Ze status=0008
14:31:50 Check angles
14:31:50 SkyScan query
14:31:50 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:31:50 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:31:50 Message to Master queued w/err=0: serial=196654 error=0
14:31:55 Received message from Master: op=Filter serial=196655
14:31:55 Color wheel filter change from 0 to 0
14:31:55 FLIGetFilterPos err=0  currentPosition=0
14:31:55 FLIGetStepsRemaining err=0  RemainingSteps=0
14:31:55 Filter is already there-color wheel unchanged
14:31:55 Received message from Master: op=Shutter serial=196656
14:31:55 Shutter LASER close
14:31:55 Received message from Camera: op=State serial=196658
14:31:55 GetSingleValue result=40  Value=cccccccc
14:31:55 SkyScan query
14:31:56 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:31:56 Parameters OK
14:31:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:31:56 Set A/D data flow result=40
14:31:56 Set A/D channel type result=40
14:31:56 Set A/D encoding result=40
14:31:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:31:56 Set channel filter=0.000000e+000  result=40
14:31:56 Config A/D  Result=40
14:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:31:56 Get A/D filter: -9.255963e+061  result=40
14:31:56 Get A/D value=-858993460  result=40
14:31:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:31:56 Parameters OK
14:31:56 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:31:56 Set A/D data flow result=40
14:31:56 Set A/D channel type result=40
14:31:56 Set A/D encoding result=40
14:31:56 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:31:56 Set channel filter=0.000000e+000  result=40
14:31:56 Config A/D  Result=40
14:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:31:56 Get A/D filter: -9.255963e+061  result=40
14:31:56 Get A/D value=-858993460  result=40
14:31:56 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:31:56 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:31:56 Aux=
14:31:56 Message to Camera, serial 196658 queued
14:32:33 Received message from Master: op=PointingHead serial=196671
14:32:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:32:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:32:33 Point started: ret=0
14:32:33 point_skyscan result=0
14:32:34 Check angles
14:32:34 SkyScan query
14:32:34 SkyScan query done: ret=0  az=153<-10200  ze=6.51<-11566  Statuses=0009 0008
14:32:34 Msec=0  True Az=153  Ze=6.51  Az status=0009  Ze status=0008
14:32:35 Check angles
14:32:35 SkyScan query
14:32:35 SkyScan query done: ret=0  az=135.165<-9011  ze=6.495<-11567  Statuses=0009 0008
14:32:35 Msec=750  True Az=135.165  Ze=6.495  Az status=0009  Ze status=0008
14:32:35 Check angles
14:32:35 SkyScan query
14:32:36 SkyScan query done: ret=0  az=117.33<-7822  ze=6.495<-11567  Statuses=0009 0008
14:32:36 Msec=1500  True Az=117.33  Ze=6.495  Az status=0009  Ze status=0008
14:32:36 Check angles
14:32:36 SkyScan query
14:32:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:32:37 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:32:37 Message to Master queued w/err=0: serial=196671 error=0
14:32:42 Received message from Master: op=Filter serial=196672
14:32:42 Color wheel filter change from 0 to 0
14:32:42 FLIGetFilterPos err=0  currentPosition=0
14:32:42 FLIGetStepsRemaining err=0  RemainingSteps=0
14:32:42 Filter is already there-color wheel unchanged
14:32:42 Received message from Master: op=Shutter serial=196673
14:32:42 Shutter LASER close
14:32:42 Received message from Camera: op=State serial=196675
14:32:42 GetSingleValue result=40  Value=cccccccc
14:32:42 SkyScan query
14:32:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:32:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:32:42 Parameters OK
14:32:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:32:42 Set A/D data flow result=40
14:32:42 Set A/D channel type result=40
14:32:42 Set A/D encoding result=40
14:32:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:32:42 Set channel filter=0.000000e+000  result=40
14:32:42 Config A/D  Result=40
14:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:32:42 Get A/D filter: -9.255963e+061  result=40
14:32:42 Get A/D value=-858993460  result=40
14:32:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:32:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:32:42 Parameters OK
14:32:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:32:42 Set A/D data flow result=40
14:32:42 Set A/D channel type result=40
14:32:42 Set A/D encoding result=40
14:32:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:32:42 Set channel filter=0.000000e+000  result=40
14:32:42 Config A/D  Result=40
14:32:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:32:42 Get A/D filter: -9.255963e+061  result=40
14:32:42 Get A/D value=-858993460  result=40
14:32:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:32:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:32:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:32:42 Aux=
14:32:42 Message to Camera, serial 196675 queued
14:33:19 Received message from Master: op=PointingHead serial=196688
14:33:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:33:19 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:33:20 Point started: ret=0
14:33:20 point_skyscan result=0
14:33:20 Check angles
14:33:20 SkyScan query
14:33:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.025<-13535  Statuses=0008 0009
14:33:21 Msec=0  True Az=112.995  Ze=-23.025  Az status=0008  Ze status=0009
14:33:21 Check angles
14:33:21 SkyScan query
14:33:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.445<-14963  Statuses=0008 0009
14:33:22 Msec=750  True Az=112.995  Ze=-44.445  Az status=0008  Ze status=0009
14:33:22 Check angles
14:33:22 SkyScan query
14:33:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.4<-16360  Statuses=0008 0009
14:33:23 Msec=1500  True Az=112.995  Ze=-65.4  Az status=0008  Ze status=0009
14:33:23 Check angles
14:33:23 SkyScan query
14:33:23 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.355<-17757  Statuses=0008 0009
14:33:23 Msec=2250  True Az=112.995  Ze=-86.355  Az status=0008  Ze status=0009
14:33:23 Check angles
14:33:23 SkyScan query
14:33:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.295<-19153  Statuses=0008 0009
14:33:24 Msec=3000  True Az=112.995  Ze=-107.295  Az status=0008  Ze status=0009
14:33:24 Check angles
14:33:24 SkyScan query
14:33:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.655<-20577  Statuses=0008 0009
14:33:25 Msec=3750  True Az=112.995  Ze=-128.655  Az status=0008  Ze status=0009
14:33:25 Check angles
14:33:25 SkyScan query
14:33:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.625<-21975  Statuses=0008 0009
14:33:26 Msec=4500  True Az=112.995  Ze=-149.625  Az status=0008  Ze status=0009
14:33:26 Check angles
14:33:26 SkyScan query
14:33:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.565<-23371  Statuses=0008 0009
14:33:26 Msec=5250  True Az=112.995  Ze=-170.565  Az status=0008  Ze status=0009
14:33:26 Check angles
14:33:26 SkyScan query
14:33:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:33:27 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:33:27 Message to Master queued w/err=0: serial=196688 error=0
14:33:32 Received message from Master: op=Filter serial=196689
14:33:32 Color wheel filter change from 0 to 0
14:33:32 FLIGetFilterPos err=0  currentPosition=0
14:33:32 FLIGetStepsRemaining err=0  RemainingSteps=0
14:33:32 Filter is already there-color wheel unchanged
14:33:32 Received message from Master: op=Shutter serial=196690
14:33:32 Shutter LASER open
14:33:32 Received message from Camera: op=State serial=196692
14:33:32 GetSingleValue result=40  Value=cccccccc
14:33:32 SkyScan query
14:33:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:33:33 Parameters OK
14:33:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:33:33 Set A/D data flow result=40
14:33:33 Set A/D channel type result=40
14:33:33 Set A/D encoding result=40
14:33:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:33:33 Set channel filter=0.000000e+000  result=40
14:33:33 Config A/D  Result=40
14:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:33:33 Get A/D filter: -9.255963e+061  result=40
14:33:33 Get A/D value=-858993460  result=40
14:33:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:33:33 Parameters OK
14:33:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:33:33 Set A/D data flow result=40
14:33:33 Set A/D channel type result=40
14:33:33 Set A/D encoding result=40
14:33:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:33:33 Set channel filter=0.000000e+000  result=40
14:33:33 Config A/D  Result=40
14:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:33:33 Get A/D filter: -9.255963e+061  result=40
14:33:33 Get A/D value=-858993460  result=40
14:33:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:33:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:33:33 Aux=
14:33:33 Message to Camera, serial 196692 queued
14:33:36 Received message from Master: op=Identify serial=196696
14:33:41 Received message from Master: op=Shutter serial=196705
14:33:41 Shutter LASER close
14:33:42 Received message from Master: op=PointingHead serial=196709
14:33:42 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:33:42 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:33:42 Point started: ret=0
14:33:42 point_skyscan result=0
14:33:43 Check angles
14:33:43 SkyScan query
14:33:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-142.665<-21511  Statuses=0008 0009
14:33:44 Msec=0  True Az=112.995  Ze=-142.665  Az status=0008  Ze status=0009
14:33:44 Check angles
14:33:44 SkyScan query
14:33:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.695<-20113  Statuses=0008 0009
14:33:44 Msec=750  True Az=112.995  Ze=-121.695  Az status=0008  Ze status=0009
14:33:44 Check angles
14:33:44 SkyScan query
14:33:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.755<-18717  Statuses=0008 0009
14:33:45 Msec=1500  True Az=112.995  Ze=-100.755  Az status=0008  Ze status=0009
14:33:45 Check angles
14:33:45 SkyScan query
14:33:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.815<-17321  Statuses=0008 0009
14:33:46 Msec=2250  True Az=112.995  Ze=-79.815  Az status=0008  Ze status=0009
14:33:46 Check angles
14:33:46 SkyScan query
14:33:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
14:33:47 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
14:33:47 Check angles
14:33:47 SkyScan query
14:33:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.875<-14525  Statuses=0008 0009
14:33:47 Msec=3750  True Az=112.995  Ze=-37.875  Az status=0008  Ze status=0009
14:33:47 Check angles
14:33:47 SkyScan query
14:33:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.485<-13099  Statuses=0008 0009
14:33:48 Msec=4500  True Az=112.995  Ze=-16.485  Az status=0008  Ze status=0009
14:33:48 Check angles
14:33:48 SkyScan query
14:33:49 SkyScan query done: ret=0  az=112.995<-7533  ze=4.395<-11707  Statuses=0008 0009
14:33:49 Msec=5250  True Az=112.995  Ze=4.395  Az status=0008  Ze status=0009
14:33:49 Check angles
14:33:49 SkyScan query
14:33:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:33:50 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:33:50 Message to Master queued w/err=0: serial=196709 error=0
14:33:55 Received message from Master: op=Filter serial=196710
14:33:55 Color wheel filter change from 0 to 0
14:33:55 FLIGetFilterPos err=0  currentPosition=0
14:33:55 FLIGetStepsRemaining err=0  RemainingSteps=0
14:33:55 Filter is already there-color wheel unchanged
14:33:55 Received message from Master: op=Shutter serial=196711
14:33:55 Shutter LASER close
14:33:55 Received message from Camera: op=State serial=196713
14:33:55 GetSingleValue result=40  Value=cccccccc
14:33:55 SkyScan query
14:33:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:33:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:33:55 Parameters OK
14:33:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:33:55 Set A/D data flow result=40
14:33:55 Set A/D channel type result=40
14:33:55 Set A/D encoding result=40
14:33:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:33:55 Set channel filter=0.000000e+000  result=40
14:33:55 Config A/D  Result=40
14:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:33:55 Get A/D filter: -9.255963e+061  result=40
14:33:55 Get A/D value=-858993460  result=40
14:33:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:33:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:33:55 Parameters OK
14:33:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:33:55 Set A/D data flow result=40
[UTC 2019-3-9  14:33:55]
14:33:55 Set A/D channel type result=40
14:33:55 Set A/D encoding result=40
14:33:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:33:55 Set channel filter=0.000000e+000  result=40
14:33:55 Config A/D  Result=40
14:33:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:33:55 Get A/D filter: -9.255963e+061  result=40
14:33:55 Get A/D value=-858993460  result=40
14:33:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:33:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:33:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:33:55 Aux=
14:33:55 Message to Camera, serial 196713 queued
14:34:31 Received message from Master: op=PointingHead serial=196725
14:34:31 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:34:31 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:34:32 Point started: ret=0
14:34:32 point_skyscan result=0
14:34:32 Check angles
14:34:32 SkyScan query
14:34:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:34:33 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:34:33 Message to Master queued w/err=0: serial=196725 error=0
14:34:38 Received message from Master: op=Filter serial=196726
14:34:38 Color wheel filter change from 0 to 0
14:34:38 FLIGetFilterPos err=0  currentPosition=0
14:34:38 FLIGetStepsRemaining err=0  RemainingSteps=0
14:34:38 Filter is already there-color wheel unchanged
14:34:38 Received message from Master: op=Shutter serial=196727
14:34:38 Shutter LASER close
14:34:38 Received message from Camera: op=State serial=196729
14:34:38 GetSingleValue result=40  Value=cccccccc
14:34:38 SkyScan query
14:34:39 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:34:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:34:39 Parameters OK
14:34:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:34:39 Set A/D data flow result=40
14:34:39 Set A/D channel type result=40
14:34:39 Set A/D encoding result=40
14:34:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:34:39 Set channel filter=0.000000e+000  result=40
14:34:39 Config A/D  Result=40
14:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:34:39 Get A/D filter: -9.255963e+061  result=40
14:34:39 Get A/D value=-858993460  result=40
14:34:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:34:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:34:39 Parameters OK
14:34:39 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:34:39 Set A/D data flow result=40
14:34:39 Set A/D channel type result=40
14:34:39 Set A/D encoding result=40
14:34:39 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:34:39 Set channel filter=0.000000e+000  result=40
14:34:39 Config A/D  Result=40
14:34:39 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:34:39 Get A/D filter: -9.255963e+061  result=40
14:34:39 Get A/D value=-858993460  result=40
14:34:39 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:34:39 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:34:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:34:39 Aux=
14:34:39 Message to Camera, serial 196729 queued
14:35:16 Received message from Master: op=PointingHead serial=196742
14:35:16 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:35:16 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:35:16 Point started: ret=0
14:35:16 point_skyscan result=0
14:35:17 Check angles
14:35:17 SkyScan query
14:35:17 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:35:17 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:35:17 Message to Master queued w/err=0: serial=196742 error=0
14:35:22 Received message from Master: op=Filter serial=196743
14:35:22 Color wheel filter change from 0 to 0
14:35:22 FLIGetFilterPos err=0  currentPosition=0
14:35:22 FLIGetStepsRemaining err=0  RemainingSteps=0
14:35:22 Filter is already there-color wheel unchanged
14:35:22 Received message from Master: op=Shutter serial=196744
14:35:22 Shutter LASER close
14:35:23 Received message from Camera: op=State serial=196746
14:35:23 GetSingleValue result=40  Value=cccccccc
14:35:23 SkyScan query
14:35:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:35:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:35:23 Parameters OK
14:35:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:35:23 Set A/D data flow result=40
14:35:23 Set A/D channel type result=40
14:35:23 Set A/D encoding result=40
14:35:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:35:23 Set channel filter=0.000000e+000  result=40
14:35:23 Config A/D  Result=40
14:35:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:35:23 Get A/D filter: -9.255963e+061  result=40
14:35:23 Get A/D value=-858993460  result=40
14:35:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:35:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:35:23 Parameters OK
14:35:23 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:35:23 Set A/D data flow result=40
14:35:23 Set A/D channel type result=40
14:35:23 Set A/D encoding result=40
14:35:23 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:35:23 Set channel filter=0.000000e+000  result=40
14:35:23 Config A/D  Result=40
14:35:23 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:35:23 Get A/D filter: -9.255963e+061  result=40
14:35:23 Get A/D value=-858993460  result=40
14:35:23 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:35:23 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:35:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:35:23 Aux=
14:35:23 Message to Camera, serial 196746 queued
14:36:00 Received message from Master: op=PointingHead serial=196759
14:36:00 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:36:00 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:36:00 Point started: ret=0
14:36:00 point_skyscan result=0
14:36:01 Check angles
14:36:01 SkyScan query
14:36:02 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:36:02 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:36:02 Message to Master queued w/err=0: serial=196759 error=0
14:36:07 Received message from Master: op=Filter serial=196760
14:36:07 Color wheel filter change from 0 to 0
14:36:07 FLIGetFilterPos err=0  currentPosition=0
14:36:07 FLIGetStepsRemaining err=0  RemainingSteps=0
14:36:07 Filter is already there-color wheel unchanged
14:36:07 Received message from Master: op=Shutter serial=196761
14:36:07 Shutter LASER close
14:36:07 Received message from Camera: op=State serial=196763
14:36:07 GetSingleValue result=40  Value=cccccccc
14:36:07 SkyScan query
14:36:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:36:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:36:07 Parameters OK
14:36:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:36:07 Set A/D data flow result=40
14:36:07 Set A/D channel type result=40
14:36:07 Set A/D encoding result=40
14:36:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:36:07 Set channel filter=0.000000e+000  result=40
14:36:07 Config A/D  Result=40
14:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:36:07 Get A/D filter: -9.255963e+061  result=40
14:36:07 Get A/D value=-858993460  result=40
14:36:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:36:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:36:07 Parameters OK
14:36:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:36:07 Set A/D data flow result=40
14:36:07 Set A/D channel type result=40
14:36:07 Set A/D encoding result=40
14:36:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:36:07 Set channel filter=0.000000e+000  result=40
14:36:07 Config A/D  Result=40
14:36:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:36:07 Get A/D filter: -9.255963e+061  result=40
14:36:07 Get A/D value=-858993460  result=40
14:36:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:36:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:36:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:36:07 Aux=
14:36:07 Message to Camera, serial 196763 queued
14:36:44 Received message from Master: op=PointingHead serial=196776
14:36:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:36:44 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:36:45 Point started: ret=0
14:36:45 point_skyscan result=0
14:36:45 Check angles
14:36:45 SkyScan query
14:36:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.07<-13538  Statuses=0008 0009
14:36:46 Msec=0  True Az=112.995  Ze=-23.07  Az status=0008  Ze status=0009
14:36:46 Check angles
14:36:46 SkyScan query
14:36:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.49<-14966  Statuses=0008 0009
14:36:47 Msec=750  True Az=112.995  Ze=-44.49  Az status=0008  Ze status=0009
14:36:47 Check angles
14:36:47 SkyScan query
14:36:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.88<-16392  Statuses=0008 0009
14:36:47 Msec=1500  True Az=112.995  Ze=-65.88  Az status=0008  Ze status=0009
14:36:48 Check angles
14:36:48 SkyScan query
14:36:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.82<-17788  Statuses=0008 0009
14:36:48 Msec=2250  True Az=112.995  Ze=-86.82  Az status=0008  Ze status=0009
14:36:48 Check angles
14:36:48 SkyScan query
14:36:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.775<-19185  Statuses=0008 0009
14:36:49 Msec=3000  True Az=112.995  Ze=-107.775  Az status=0008  Ze status=0009
14:36:49 Check angles
14:36:49 SkyScan query
14:36:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.715<-20581  Statuses=0008 0009
14:36:50 Msec=3750  True Az=112.995  Ze=-128.715  Az status=0008  Ze status=0009
14:36:50 Check angles
14:36:50 SkyScan query
14:36:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.685<-21979  Statuses=0008 0009
14:36:50 Msec=4500  True Az=112.995  Ze=-149.685  Az status=0008  Ze status=0009
14:36:51 Check angles
14:36:51 SkyScan query
14:36:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.94<-23396  Statuses=0008 0009
14:36:51 Msec=5250  True Az=112.995  Ze=-170.94  Az status=0008  Ze status=0009
14:36:51 Check angles
14:36:51 SkyScan query
14:36:52 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:36:52 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:36:52 Message to Master queued w/err=0: serial=196776 error=0
14:36:57 Received message from Master: op=Filter serial=196777
14:36:57 Color wheel filter change from 0 to 0
14:36:57 FLIGetFilterPos err=0  currentPosition=0
14:36:57 FLIGetStepsRemaining err=0  RemainingSteps=0
14:36:57 Filter is already there-color wheel unchanged
14:36:57 Received message from Master: op=Shutter serial=196778
14:36:57 Shutter LASER open
14:36:57 Received message from Camera: op=State serial=196780
14:36:57 GetSingleValue result=40  Value=cccccccc
14:36:57 SkyScan query
14:36:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:36:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:36:58 Parameters OK
14:36:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:36:58 Set A/D data flow result=40
14:36:58 Set A/D channel type result=40
14:36:58 Set A/D encoding result=40
14:36:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:36:58 Set channel filter=0.000000e+000  result=40
14:36:58 Config A/D  Result=40
14:36:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:36:58 Get A/D filter: -9.255963e+061  result=40
14:36:58 Get A/D value=-858993460  result=40
14:36:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:36:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:36:58 Parameters OK
14:36:58 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:36:58 Set A/D data flow result=40
14:36:58 Set A/D channel type result=40
14:36:58 Set A/D encoding result=40
14:36:58 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:36:58 Set channel filter=0.000000e+000  result=40
14:36:58 Config A/D  Result=40
14:36:58 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:36:58 Get A/D filter: -9.255963e+061  result=40
14:36:58 Get A/D value=-858993460  result=40
14:36:58 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:36:58 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:36:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:36:58 Aux=
14:36:58 Message to Camera, serial 196780 queued
14:37:06 Received message from Master: op=Shutter serial=196790
14:37:06 Shutter LASER close
14:37:07 Received message from Master: op=PointingHead serial=196794
14:37:07 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:37:07 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:37:07 Point started: ret=0
14:37:07 point_skyscan result=0
14:37:08 Check angles
14:37:08 SkyScan query
14:37:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.43<-21562  Statuses=0008 0009
14:37:09 Msec=0  True Az=112.995  Ze=-143.43  Az status=0008  Ze status=0009
14:37:09 Check angles
14:37:09 SkyScan query
14:37:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.995<-20133  Statuses=0008 0009
14:37:09 Msec=750  True Az=112.995  Ze=-121.995  Az status=0008  Ze status=0009
14:37:09 Check angles
14:37:09 SkyScan query
14:37:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.085<-18739  Statuses=0008 0009
14:37:10 Msec=1500  True Az=112.995  Ze=-101.085  Az status=0008  Ze status=0009
14:37:10 Check angles
14:37:10 SkyScan query
14:37:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.115<-17341  Statuses=0008 0009
14:37:11 Msec=2250  True Az=112.995  Ze=-80.115  Az status=0008  Ze status=0009
14:37:11 Check angles
14:37:11 SkyScan query
14:37:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.175<-15945  Statuses=0008 0009
14:37:12 Msec=3000  True Az=112.995  Ze=-59.175  Az status=0008  Ze status=0009
14:37:12 Check angles
14:37:12 SkyScan query
14:37:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.755<-14517  Statuses=0008 0009
14:37:12 Msec=3750  True Az=112.995  Ze=-37.755  Az status=0008  Ze status=0009
14:37:12 Check angles
14:37:12 SkyScan query
14:37:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.8<-13120  Statuses=0008 0009
14:37:13 Msec=4500  True Az=112.995  Ze=-16.8  Az status=0008  Ze status=0009
14:37:13 Check angles
14:37:13 SkyScan query
14:37:14 SkyScan query done: ret=0  az=112.995<-7533  ze=4.125<-11725  Statuses=0008 0009
14:37:14 Msec=5250  True Az=112.995  Ze=4.125  Az status=0008  Ze status=0009
14:37:14 Check angles
14:37:14 SkyScan query
14:37:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:37:15 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:37:15 Message to Master queued w/err=0: serial=196794 error=0
14:37:20 Received message from Master: op=Filter serial=196795
14:37:20 Color wheel filter change from 0 to 0
14:37:20 FLIGetFilterPos err=0  currentPosition=0
14:37:20 FLIGetStepsRemaining err=0  RemainingSteps=0
14:37:20 Filter is already there-color wheel unchanged
14:37:20 Received message from Master: op=Shutter serial=196796
14:37:20 Shutter LASER close
14:37:20 Received message from Camera: op=State serial=196798
14:37:20 GetSingleValue result=40  Value=cccccccc
14:37:20 SkyScan query
14:37:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:37:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:37:20 Parameters OK
14:37:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:37:20 Set A/D data flow result=40
14:37:20 Set A/D channel type result=40
14:37:20 Set A/D encoding result=40
14:37:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:37:20 Set channel filter=0.000000e+000  result=40
14:37:20 Config A/D  Result=40
14:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:37:20 Get A/D filter: -9.255963e+061  result=40
14:37:20 Get A/D value=-858993460  result=40
14:37:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:37:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:37:20 Parameters OK
14:37:20 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:37:20 Set A/D data flow result=40
14:37:20 Set A/D channel type result=40
14:37:20 Set A/D encoding result=40
14:37:20 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:37:20 Set channel filter=0.000000e+000  result=40
14:37:20 Config A/D  Result=40
14:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:37:20 Get A/D filter: -9.255963e+061  result=40
14:37:20 Get A/D value=-858993460  result=40
14:37:20 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:37:20 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:37:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:37:20 Aux=
14:37:20 Message to Camera, serial 196798 queued
14:37:57 Received message from Master: op=PointingHead serial=196811
14:37:57 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:37:57 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:37:58 Point started: ret=0
14:37:58 point_skyscan result=0
14:37:58 Check angles
14:37:58 SkyScan query
14:37:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:37:59 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:37:59 Message to Master queued w/err=0: serial=196811 error=0
14:38:04 Received message from Master: op=Filter serial=196812
14:38:04 Color wheel filter change from 0 to 0
14:38:04 FLIGetFilterPos err=0  currentPosition=0
14:38:04 FLIGetStepsRemaining err=0  RemainingSteps=0
14:38:04 Filter is already there-color wheel unchanged
14:38:04 Received message from Master: op=Shutter serial=196813
14:38:04 Shutter LASER close
14:38:04 Received message from Camera: op=State serial=196815
14:38:04 GetSingleValue result=40  Value=cccccccc
14:38:04 SkyScan query
14:38:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:38:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:38:05 Parameters OK
14:38:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:38:05 Set A/D data flow result=40
14:38:05 Set A/D channel type result=40
14:38:05 Set A/D encoding result=40
14:38:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:38:05 Set channel filter=0.000000e+000  result=40
14:38:05 Config A/D  Result=40
14:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:38:05 Get A/D filter: -9.255963e+061  result=40
14:38:05 Get A/D value=-858993460  result=40
14:38:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:38:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:38:05 Parameters OK
14:38:05 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:38:05 Set A/D data flow result=40
14:38:05 Set A/D channel type result=40
14:38:05 Set A/D encoding result=40
14:38:05 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:38:05 Set channel filter=0.000000e+000  result=40
14:38:05 Config A/D  Result=40
14:38:05 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:38:05 Get A/D filter: -9.255963e+061  result=40
14:38:05 Get A/D value=-858993460  result=40
14:38:05 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:38:05 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:38:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:38:05 Aux=
14:38:05 Message to Camera, serial 196815 queued
14:38:42 Received message from Master: op=PointingHead serial=196828
14:38:42 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:38:42 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:38:42 Point started: ret=0
14:38:42 point_skyscan result=0
14:38:43 Check angles
14:38:43 SkyScan query
14:38:43 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
14:38:43 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
14:38:43 Check angles
14:38:43 SkyScan query
14:38:44 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
14:38:44 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
14:38:44 Check angles
14:38:44 SkyScan query
14:38:45 SkyScan query done: ret=0  az=171.09<-11406  ze=-6.495<-12433  Statuses=0009 0008
14:38:45 Msec=1500  True Az=171.09  Ze=-6.495  Az status=0009  Ze status=0008
14:38:45 Check angles
14:38:45 SkyScan query
14:38:46 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:38:46 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:38:46 Message to Master queued w/err=0: serial=196828 error=0
14:38:51 Received message from Master: op=Filter serial=196829
14:38:51 Color wheel filter change from 0 to 0
14:38:51 FLIGetFilterPos err=0  currentPosition=0
14:38:51 FLIGetStepsRemaining err=0  RemainingSteps=0
14:38:51 Filter is already there-color wheel unchanged
14:38:51 Received message from Master: op=Shutter serial=196830
14:38:51 Shutter LASER close
14:38:51 Received message from Camera: op=State serial=196832
14:38:51 GetSingleValue result=40  Value=cccccccc
14:38:51 SkyScan query
14:38:51 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:38:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:38:51 Parameters OK
14:38:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:38:51 Set A/D data flow result=40
14:38:51 Set A/D channel type result=40
14:38:51 Set A/D encoding result=40
14:38:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:38:51 Set channel filter=0.000000e+000  result=40
14:38:51 Config A/D  Result=40
14:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:38:51 Get A/D filter: -9.255963e+061  result=40
14:38:51 Get A/D value=-858993460  result=40
14:38:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:38:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:38:51 Parameters OK
14:38:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:38:51 Set A/D data flow result=40
14:38:51 Set A/D channel type result=40
14:38:51 Set A/D encoding result=40
14:38:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:38:51 Set channel filter=0.000000e+000  result=40
14:38:51 Config A/D  Result=40
14:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:38:51 Get A/D filter: -9.255963e+061  result=40
14:38:51 Get A/D value=-858993460  result=40
14:38:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:38:51 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:38:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:38:51 Aux=
14:38:51 Message to Camera, serial 196832 queued
14:39:27 Received message from Master: op=PointingHead serial=196844
14:39:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:39:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:39:28 Point started: ret=0
14:39:28 point_skyscan result=0
14:39:28 Check angles
14:39:28 SkyScan query
14:39:29 SkyScan query done: ret=0  az=153.165<-10211  ze=6.51<-11566  Statuses=0009 0008
14:39:29 Msec=0  True Az=153.165  Ze=6.51  Az status=0009  Ze status=0008
14:39:29 Check angles
14:39:29 SkyScan query
14:39:30 SkyScan query done: ret=0  az=135.315<-9021  ze=6.495<-11567  Statuses=0009 0008
14:39:30 Msec=750  True Az=135.315  Ze=6.495  Az status=0009  Ze status=0008
14:39:30 Check angles
14:39:30 SkyScan query
14:39:31 SkyScan query done: ret=0  az=117.375<-7825  ze=6.495<-11567  Statuses=0009 0008
14:39:31 Msec=1500  True Az=117.375  Ze=6.495  Az status=0009  Ze status=0008
14:39:31 Check angles
14:39:31 SkyScan query
14:39:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:39:31 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:39:31 Message to Master queued w/err=0: serial=196844 error=0
14:39:36 Received message from Master: op=Filter serial=196845
14:39:36 Color wheel filter change from 0 to 0
14:39:36 FLIGetFilterPos err=0  currentPosition=0
14:39:36 FLIGetStepsRemaining err=0  RemainingSteps=0
14:39:36 Filter is already there-color wheel unchanged
14:39:36 Received message from Master: op=Shutter serial=196846
14:39:36 Shutter LASER close
14:39:36 Received message from Camera: op=State serial=196848
14:39:36 GetSingleValue result=40  Value=cccccccc
14:39:36 SkyScan query
14:39:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:39:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:39:37 Parameters OK
14:39:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:39:37 Set A/D data flow result=40
14:39:37 Set A/D channel type result=40
14:39:37 Set A/D encoding result=40
14:39:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:39:37 Set channel filter=0.000000e+000  result=40
14:39:37 Config A/D  Result=40
14:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:39:37 Get A/D filter: -9.255963e+061  result=40
14:39:37 Get A/D value=-858993460  result=40
14:39:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:39:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:39:37 Parameters OK
14:39:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:39:37 Set A/D data flow result=40
14:39:37 Set A/D channel type result=40
14:39:37 Set A/D encoding result=40
14:39:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:39:37 Set channel filter=0.000000e+000  result=40
14:39:37 Config A/D  Result=40
14:39:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:39:37 Get A/D filter: -9.255963e+061  result=40
14:39:37 Get A/D value=-858993460  result=40
14:39:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:39:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:39:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:39:37 Aux=
14:39:37 Message to Camera, serial 196848 queued
14:40:14 Received message from Master: op=PointingHead serial=196861
14:40:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:40:14 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:40:14 Point started: ret=0
14:40:14 point_skyscan result=0
14:40:15 Check angles
14:40:15 SkyScan query
14:40:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.625<-13575  Statuses=0008 0009
14:40:16 Msec=0  True Az=112.995  Ze=-23.625  Az status=0008  Ze status=0009
14:40:16 Check angles
14:40:16 SkyScan query
14:40:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.58<-14972  Statuses=0008 0009
14:40:16 Msec=750  True Az=112.995  Ze=-44.58  Az status=0008  Ze status=0009
14:40:17 Check angles
14:40:17 SkyScan query
14:40:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.955<-16397  Statuses=0008 0009
14:40:17 Msec=1500  True Az=112.995  Ze=-65.955  Az status=0008  Ze status=0009
14:40:17 Check angles
14:40:17 SkyScan query
14:40:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.895<-17793  Statuses=0008 0009
14:40:18 Msec=2250  True Az=112.995  Ze=-86.895  Az status=0008  Ze status=0009
14:40:18 Check angles
14:40:18 SkyScan query
14:40:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.865<-19191  Statuses=0008 0009
14:40:19 Msec=3000  True Az=112.995  Ze=-107.865  Az status=0008  Ze status=0009
14:40:19 Check angles
14:40:19 SkyScan query
14:40:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.24<-20616  Statuses=0008 0009
14:40:19 Msec=3750  True Az=112.995  Ze=-129.24  Az status=0008  Ze status=0009
14:40:20 Check angles
14:40:20 SkyScan query
14:40:20 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.21<-22014  Statuses=0008 0009
14:40:20 Msec=4500  True Az=112.995  Ze=-150.21  Az status=0008  Ze status=0009
14:40:20 Check angles
14:40:20 SkyScan query
14:40:21 SkyScan query done: ret=0  az=112.995<-7533  ze=-171.015<-23401  Statuses=0008 0009
14:40:21 Msec=5250  True Az=112.995  Ze=-171.015  Az status=0008  Ze status=0009
14:40:21 Check angles
14:40:21 SkyScan query
14:40:22 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:40:22 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:40:22 Message to Master queued w/err=0: serial=196861 error=0
14:40:27 Received message from Master: op=Filter serial=196862
14:40:27 Color wheel filter change from 0 to 0
14:40:27 FLIGetFilterPos err=0  currentPosition=0
14:40:27 FLIGetStepsRemaining err=0  RemainingSteps=0
14:40:27 Filter is already there-color wheel unchanged
14:40:27 Received message from Master: op=Shutter serial=196863
14:40:27 Shutter LASER open
14:40:27 Received message from Camera: op=State serial=196865
14:40:27 GetSingleValue result=40  Value=cccccccc
14:40:27 SkyScan query
14:40:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:40:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:40:28 Parameters OK
14:40:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:40:28 Set A/D data flow result=40
14:40:28 Set A/D channel type result=40
14:40:28 Set A/D encoding result=40
14:40:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:40:28 Set channel filter=0.000000e+000  result=40
14:40:28 Config A/D  Result=40
14:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:40:28 Get A/D filter: -9.255963e+061  result=40
14:40:28 Get A/D value=-858993460  result=40
14:40:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:40:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:40:28 Parameters OK
14:40:28 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:40:28 Set A/D data flow result=40
14:40:28 Set A/D channel type result=40
14:40:28 Set A/D encoding result=40
14:40:28 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:40:28 Set channel filter=0.000000e+000  result=40
14:40:28 Config A/D  Result=40
14:40:28 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:40:28 Get A/D filter: -9.255963e+061  result=40
14:40:28 Get A/D value=-858993460  result=40
14:40:28 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:40:28 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:40:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:40:28 Aux=
14:40:28 Message to Camera, serial 196865 queued
14:40:36 Received message from Master: op=Shutter serial=196875
14:40:36 Shutter LASER close
14:40:36 Received message from Master: op=PointingHead serial=196879
14:40:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:40:36 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:40:37 Point started: ret=0
14:40:37 point_skyscan result=0
14:40:38 Check angles
14:40:38 SkyScan query
14:40:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.115<-21541  Statuses=0008 0009
14:40:38 Msec=0  True Az=112.995  Ze=-143.115  Az status=0008  Ze status=0009
14:40:38 Check angles
14:40:38 SkyScan query
14:40:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.145<-20143  Statuses=0008 0009
14:40:39 Msec=750  True Az=112.995  Ze=-122.145  Az status=0008  Ze status=0009
14:40:39 Check angles
14:40:39 SkyScan query
14:40:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.77<-18718  Statuses=0008 0009
14:40:40 Msec=1500  True Az=112.995  Ze=-100.77  Az status=0008  Ze status=0009
14:40:40 Check angles
14:40:40 SkyScan query
14:40:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.8<-17320  Statuses=0008 0009
14:40:40 Msec=2250  True Az=112.995  Ze=-79.8  Az status=0008  Ze status=0009
14:40:41 Check angles
14:40:41 SkyScan query
14:40:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.86<-15924  Statuses=0008 0009
14:40:41 Msec=3000  True Az=112.995  Ze=-58.86  Az status=0008  Ze status=0009
14:40:41 Check angles
14:40:41 SkyScan query
14:40:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.875<-14525  Statuses=0008 0009
14:40:42 Msec=3750  True Az=112.995  Ze=-37.875  Az status=0008  Ze status=0009
14:40:42 Check angles
14:40:42 SkyScan query
14:40:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.935<-13129  Statuses=0008 0009
14:40:43 Msec=4500  True Az=112.995  Ze=-16.935  Az status=0008  Ze status=0009
14:40:43 Check angles
14:40:43 SkyScan query
14:40:43 SkyScan query done: ret=0  az=112.995<-7533  ze=4.02<-11732  Statuses=0008 0009
14:40:43 Msec=5250  True Az=112.995  Ze=4.02  Az status=0008  Ze status=0009
14:40:44 Check angles
14:40:44 SkyScan query
14:40:44 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:40:44 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:40:44 Message to Master queued w/err=0: serial=196879 error=0
14:40:49 Received message from Master: op=Filter serial=196880
14:40:49 Color wheel filter change from 0 to 0
14:40:49 FLIGetFilterPos err=0  currentPosition=0
14:40:49 FLIGetStepsRemaining err=0  RemainingSteps=0
14:40:49 Filter is already there-color wheel unchanged
14:40:49 Received message from Master: op=Shutter serial=196881
14:40:49 Shutter LASER close
14:40:49 Received message from Camera: op=State serial=196883
14:40:49 GetSingleValue result=40  Value=cccccccc
14:40:49 SkyScan query
14:40:50 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:40:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:40:50 Parameters OK
14:40:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:40:50 Set A/D data flow result=40
14:40:50 Set A/D channel type result=40
14:40:50 Set A/D encoding result=40
14:40:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:40:50 Set channel filter=0.000000e+000  result=40
14:40:50 Config A/D  Result=40
14:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:40:50 Get A/D filter: -9.255963e+061  result=40
14:40:50 Get A/D value=-858993460  result=40
14:40:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:40:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:40:50 Parameters OK
14:40:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:40:50 Set A/D data flow result=40
14:40:50 Set A/D channel type result=40
14:40:50 Set A/D encoding result=40
14:40:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:40:50 Set channel filter=0.000000e+000  result=40
14:40:50 Config A/D  Result=40
14:40:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:40:50 Get A/D filter: -9.255963e+061  result=40
14:40:50 Get A/D value=-858993460  result=40
14:40:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:40:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:40:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:40:50 Aux=
14:40:50 Message to Camera, serial 196883 queued
14:41:27 Received message from Master: op=PointingHead serial=196896
14:41:27 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:41:27 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:41:27 Point started: ret=0
14:41:27 point_skyscan result=0
14:41:28 Check angles
14:41:28 SkyScan query
14:41:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:41:29 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:41:29 Message to Master queued w/err=0: serial=196896 error=0
14:41:34 Received message from Master: op=Filter serial=196897
14:41:34 Color wheel filter change from 0 to 0
14:41:34 FLIGetFilterPos err=0  currentPosition=0
14:41:34 FLIGetStepsRemaining err=0  RemainingSteps=0
14:41:34 Filter is already there-color wheel unchanged
14:41:34 Received message from Master: op=Shutter serial=196898
14:41:34 Shutter LASER close
14:41:34 Received message from Camera: op=State serial=196900
14:41:34 GetSingleValue result=40  Value=cccccccc
14:41:34 SkyScan query
14:41:34 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:41:34 Parameters OK
14:41:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:41:34 Set A/D data flow result=40
14:41:34 Set A/D channel type result=40
14:41:34 Set A/D encoding result=40
14:41:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:41:34 Set channel filter=0.000000e+000  result=40
14:41:34 Config A/D  Result=40
14:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:41:34 Get A/D filter: -9.255963e+061  result=40
14:41:34 Get A/D value=-858993460  result=40
14:41:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:41:34 Parameters OK
14:41:34 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:41:34 Set A/D data flow result=40
14:41:34 Set A/D channel type result=40
14:41:34 Set A/D encoding result=40
14:41:34 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:41:34 Set channel filter=0.000000e+000  result=40
14:41:34 Config A/D  Result=40
14:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:41:34 Get A/D filter: -9.255963e+061  result=40
14:41:34 Get A/D value=-858993460  result=40
14:41:34 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:41:34 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:41:34 Aux=
14:41:34 Message to Camera, serial 196900 queued
14:42:11 Received message from Master: op=PointingHead serial=196913
14:42:11 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:42:11 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:42:11 Point started: ret=0
14:42:11 point_skyscan result=0
14:42:12 Check angles
14:42:12 SkyScan query
14:42:13 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:42:13 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:42:13 Message to Master queued w/err=0: serial=196913 error=0
14:42:18 Received message from Master: op=Filter serial=196914
14:42:18 Color wheel filter change from 0 to 0
14:42:18 FLIGetFilterPos err=0  currentPosition=0
14:42:18 FLIGetStepsRemaining err=0  RemainingSteps=0
14:42:18 Filter is already there-color wheel unchanged
14:42:18 Received message from Master: op=Shutter serial=196915
14:42:18 Shutter LASER close
14:42:18 Received message from Camera: op=State serial=196917
14:42:18 GetSingleValue result=40  Value=cccccccc
14:42:18 SkyScan query
14:42:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:42:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:42:19 Parameters OK
14:42:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:42:19 Set A/D data flow result=40
14:42:19 Set A/D channel type result=40
14:42:19 Set A/D encoding result=40
14:42:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:42:19 Set channel filter=0.000000e+000  result=40
14:42:19 Config A/D  Result=40
14:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:42:19 Get A/D filter: -9.255963e+061  result=40
14:42:19 Get A/D value=-858993460  result=40
14:42:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:42:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:42:19 Parameters OK
14:42:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:42:19 Set A/D data flow result=40
14:42:19 Set A/D channel type result=40
14:42:19 Set A/D encoding result=40
14:42:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:42:19 Set channel filter=0.000000e+000  result=40
14:42:19 Config A/D  Result=40
14:42:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:42:19 Get A/D filter: -9.255963e+061  result=40
14:42:19 Get A/D value=-858993460  result=40
14:42:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:42:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:42:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:42:19 Aux=
14:42:19 Message to Camera, serial 196917 queued
14:42:55 Received message from Master: op=PointingHead serial=196930
14:42:55 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:42:55 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:42:56 Point started: ret=0
14:42:56 point_skyscan result=0
14:42:57 Check angles
14:42:57 SkyScan query
14:42:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:42:57 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:42:57 Message to Master queued w/err=0: serial=196930 error=0
14:43:02 Received message from Master: op=Filter serial=196931
14:43:02 Color wheel filter change from 0 to 0
14:43:02 FLIGetFilterPos err=0  currentPosition=0
14:43:02 FLIGetStepsRemaining err=0  RemainingSteps=0
14:43:02 Filter is already there-color wheel unchanged
14:43:02 Received message from Master: op=Shutter serial=196932
14:43:02 Shutter LASER close
14:43:02 Received message from Camera: op=State serial=196934
14:43:02 GetSingleValue result=40  Value=cccccccc
14:43:02 SkyScan query
14:43:03 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:43:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:43:03 Parameters OK
14:43:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:43:03 Set A/D data flow result=40
14:43:03 Set A/D channel type result=40
14:43:03 Set A/D encoding result=40
14:43:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:43:03 Set channel filter=0.000000e+000  result=40
14:43:03 Config A/D  Result=40
14:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:43:03 Get A/D filter: -9.255963e+061  result=40
14:43:03 Get A/D value=-858993460  result=40
14:43:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:43:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:43:03 Parameters OK
14:43:03 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:43:03 Set A/D data flow result=40
14:43:03 Set A/D channel type result=40
14:43:03 Set A/D encoding result=40
14:43:03 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:43:03 Set channel filter=0.000000e+000  result=40
14:43:03 Config A/D  Result=40
14:43:03 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:43:03 Get A/D filter: -9.255963e+061  result=40
14:43:03 Get A/D value=-858993460  result=40
14:43:03 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:43:03 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:43:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:43:03 Aux=
14:43:03 Message to Camera, serial 196934 queued
14:43:40 Received message from Master: op=PointingHead serial=196947
14:43:40 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:43:40 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:43:40 Point started: ret=0
14:43:40 point_skyscan result=0
14:43:41 Check angles
14:43:41 SkyScan query
14:43:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-22.995<-13533  Statuses=0008 0009
14:43:41 Msec=0  True Az=112.995  Ze=-22.995  Az status=0008  Ze status=0009
14:43:42 Check angles
14:43:42 SkyScan query
14:43:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.43<-14962  Statuses=0008 0009
14:43:42 Msec=750  True Az=112.995  Ze=-44.43  Az status=0008  Ze status=0009
14:43:42 Check angles
14:43:42 SkyScan query
14:43:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.4<-16360  Statuses=0008 0009
14:43:43 Msec=1500  True Az=112.995  Ze=-65.4  Az status=0008  Ze status=0009
14:43:43 Check angles
14:43:43 SkyScan query
14:43:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.355<-17757  Statuses=0008 0009
14:43:44 Msec=2250  True Az=112.995  Ze=-86.355  Az status=0008  Ze status=0009
14:43:44 Check angles
14:43:44 SkyScan query
14:43:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.31<-19154  Statuses=0008 0009
14:43:44 Msec=3000  True Az=112.995  Ze=-107.31  Az status=0008  Ze status=0009
14:43:45 Check angles
14:43:45 SkyScan query
14:43:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.25<-20550  Statuses=0008 0009
14:43:45 Msec=3750  True Az=112.995  Ze=-128.25  Az status=0008  Ze status=0009
14:43:45 Check angles
14:43:45 SkyScan query
14:43:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.205<-21947  Statuses=0008 0009
14:43:46 Msec=4500  True Az=112.995  Ze=-149.205  Az status=0008  Ze status=0009
14:43:46 Check angles
14:43:46 SkyScan query
14:43:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.145<-23343  Statuses=0008 0009
14:43:47 Msec=5250  True Az=112.995  Ze=-170.145  Az status=0008  Ze status=0009
14:43:47 Check angles
14:43:47 SkyScan query
14:43:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:43:47 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:43:47 Message to Master queued w/err=0: serial=196947 error=0
[UTC 2019-3-9  14:43:48]
14:43:52 Received message from Master: op=Filter serial=196948
14:43:52 Color wheel filter change from 0 to 0
14:43:52 FLIGetFilterPos err=0  currentPosition=0
14:43:52 FLIGetStepsRemaining err=0  RemainingSteps=0
14:43:52 Filter is already there-color wheel unchanged
14:43:53 Received message from Master: op=Shutter serial=196949
14:43:53 Shutter LASER open
14:43:53 Received message from Camera: op=State serial=196951
14:43:53 GetSingleValue result=40  Value=cccccccc
14:43:53 SkyScan query
14:43:53 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:43:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:43:53 Parameters OK
14:43:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:43:53 Set A/D data flow result=40
14:43:53 Set A/D channel type result=40
14:43:53 Set A/D encoding result=40
14:43:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:43:53 Set channel filter=0.000000e+000  result=40
14:43:53 Config A/D  Result=40
14:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:43:53 Get A/D filter: -9.255963e+061  result=40
14:43:53 Get A/D value=-858993460  result=40
14:43:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:43:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:43:53 Parameters OK
14:43:53 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:43:53 Set A/D data flow result=40
14:43:53 Set A/D channel type result=40
14:43:53 Set A/D encoding result=40
14:43:53 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:43:53 Set channel filter=0.000000e+000  result=40
14:43:53 Config A/D  Result=40
14:43:53 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:43:53 Get A/D filter: -9.255963e+061  result=40
14:43:53 Get A/D value=-858993460  result=40
14:43:53 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:43:53 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:43:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:43:53 Aux=
14:43:53 Message to Camera, serial 196951 queued
14:44:02 Received message from Master: op=Shutter serial=196961
14:44:02 Shutter LASER close
14:44:02 Received message from Master: op=PointingHead serial=196965
14:44:02 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:44:02 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:44:03 Point started: ret=0
14:44:03 point_skyscan result=0
14:44:04 Check angles
14:44:04 SkyScan query
14:44:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.31<-21554  Statuses=0008 0009
14:44:04 Msec=0  True Az=112.995  Ze=-143.31  Az status=0008  Ze status=0009
14:44:04 Check angles
14:44:04 SkyScan query
14:44:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.355<-20157  Statuses=0008 0009
14:44:05 Msec=750  True Az=112.995  Ze=-122.355  Az status=0008  Ze status=0009
14:44:05 Check angles
14:44:05 SkyScan query
14:44:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.4<-18760  Statuses=0008 0009
14:44:06 Msec=1500  True Az=112.995  Ze=-101.4  Az status=0008  Ze status=0009
14:44:06 Check angles
14:44:06 SkyScan query
14:44:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.43<-17362  Statuses=0008 0009
14:44:06 Msec=2250  True Az=112.995  Ze=-80.43  Az status=0008  Ze status=0009
14:44:07 Check angles
14:44:07 SkyScan query
14:44:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.49<-15966  Statuses=0008 0009
14:44:07 Msec=3000  True Az=112.995  Ze=-59.49  Az status=0008  Ze status=0009
14:44:07 Check angles
14:44:07 SkyScan query
14:44:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.52<-14568  Statuses=0008 0009
14:44:08 Msec=3750  True Az=112.995  Ze=-38.52  Az status=0008  Ze status=0009
14:44:08 Check angles
14:44:08 SkyScan query
14:44:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.58<-13172  Statuses=0008 0009
14:44:09 Msec=4500  True Az=112.995  Ze=-17.58  Az status=0008  Ze status=0009
14:44:09 Check angles
14:44:09 SkyScan query
14:44:09 SkyScan query done: ret=0  az=112.995<-7533  ze=3.39<-11774  Statuses=0008 0009
14:44:09 Msec=5250  True Az=112.995  Ze=3.39  Az status=0008  Ze status=0009
14:44:10 Check angles
14:44:10 SkyScan query
14:44:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:44:10 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:44:10 Message to Master queued w/err=0: serial=196965 error=0
14:44:15 Received message from Master: op=Filter serial=196966
14:44:15 Color wheel filter change from 0 to 0
14:44:15 FLIGetFilterPos err=0  currentPosition=0
14:44:15 FLIGetStepsRemaining err=0  RemainingSteps=0
14:44:15 Filter is already there-color wheel unchanged
14:44:15 Received message from Master: op=Shutter serial=196967
14:44:15 Shutter LASER close
14:44:15 Received message from Camera: op=State serial=196969
14:44:15 GetSingleValue result=40  Value=cccccccc
14:44:15 SkyScan query
14:44:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:44:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:44:16 Parameters OK
14:44:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:44:16 Set A/D data flow result=40
14:44:16 Set A/D channel type result=40
14:44:16 Set A/D encoding result=40
14:44:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:44:16 Set channel filter=0.000000e+000  result=40
14:44:16 Config A/D  Result=40
14:44:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:44:16 Get A/D filter: -9.255963e+061  result=40
14:44:16 Get A/D value=-858993460  result=40
14:44:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:44:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:44:16 Parameters OK
14:44:16 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:44:16 Set A/D data flow result=40
14:44:16 Set A/D channel type result=40
14:44:16 Set A/D encoding result=40
14:44:16 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:44:16 Set channel filter=0.000000e+000  result=40
14:44:16 Config A/D  Result=40
14:44:16 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:44:16 Get A/D filter: -9.255963e+061  result=40
14:44:16 Get A/D value=-858993460  result=40
14:44:16 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:44:16 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:44:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:44:16 Aux=
14:44:16 Message to Camera, serial 196969 queued
14:44:53 Received message from Master: op=PointingHead serial=196982
14:44:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:44:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:44:53 Point started: ret=0
14:44:53 point_skyscan result=0
14:44:54 Check angles
14:44:54 SkyScan query
14:44:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:44:55 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:44:55 Message to Master queued w/err=0: serial=196982 error=0
14:45:00 Received message from Master: op=Filter serial=196983
14:45:00 Color wheel filter change from 0 to 0
14:45:00 FLIGetFilterPos err=0  currentPosition=0
14:45:00 FLIGetStepsRemaining err=0  RemainingSteps=0
14:45:00 Filter is already there-color wheel unchanged
14:45:00 Received message from Master: op=Shutter serial=196984
14:45:00 Shutter LASER close
14:45:00 Received message from Camera: op=State serial=196986
14:45:00 GetSingleValue result=40  Value=cccccccc
14:45:00 SkyScan query
14:45:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:45:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:45:00 Parameters OK
14:45:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:45:00 Set A/D data flow result=40
14:45:00 Set A/D channel type result=40
14:45:00 Set A/D encoding result=40
14:45:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:45:00 Set channel filter=0.000000e+000  result=40
14:45:00 Config A/D  Result=40
14:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:45:00 Get A/D filter: -9.255963e+061  result=40
14:45:00 Get A/D value=-858993460  result=40
14:45:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:45:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:45:00 Parameters OK
14:45:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:45:00 Set A/D data flow result=40
14:45:00 Set A/D channel type result=40
14:45:00 Set A/D encoding result=40
14:45:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:45:00 Set channel filter=0.000000e+000  result=40
14:45:00 Config A/D  Result=40
14:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:45:00 Get A/D filter: -9.255963e+061  result=40
14:45:00 Get A/D value=-858993460  result=40
14:45:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:45:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:45:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:45:00 Aux=
14:45:00 Message to Camera, serial 196986 queued
14:45:37 Received message from Master: op=PointingHead serial=196999
14:45:37 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:45:37 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:45:37 Point started: ret=0
14:45:37 point_skyscan result=0
14:45:38 Check angles
14:45:38 SkyScan query
14:45:39 SkyScan query done: ret=0  az=136.11<-9074  ze=-6.51<-12434  Statuses=0009 0008
14:45:39 Msec=0  True Az=136.11  Ze=-6.51  Az status=0009  Ze status=0008
14:45:39 Check angles
14:45:39 SkyScan query
14:45:40 SkyScan query done: ret=0  az=153.54<-10236  ze=-6.495<-12433  Statuses=0009 0008
14:45:40 Msec=750  True Az=153.54  Ze=-6.495  Az status=0009  Ze status=0008
14:45:40 Check angles
14:45:40 SkyScan query
14:45:40 SkyScan query done: ret=0  az=171.105<-11407  ze=-6.495<-12433  Statuses=0009 0008
14:45:40 Msec=1500  True Az=171.105  Ze=-6.495  Az status=0009  Ze status=0008
14:45:40 Check angles
14:45:40 SkyScan query
14:45:41 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:45:41 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:45:41 Message to Master queued w/err=0: serial=196999 error=0
14:45:46 Received message from Master: op=Filter serial=197000
14:45:46 Color wheel filter change from 0 to 0
14:45:46 FLIGetFilterPos err=0  currentPosition=0
14:45:46 FLIGetStepsRemaining err=0  RemainingSteps=0
14:45:46 Filter is already there-color wheel unchanged
14:45:46 Received message from Master: op=Shutter serial=197001
14:45:46 Shutter LASER close
14:45:46 Received message from Camera: op=State serial=197003
14:45:46 GetSingleValue result=40  Value=cccccccc
14:45:46 SkyScan query
14:45:47 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:45:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:45:47 Parameters OK
14:45:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:45:47 Set A/D data flow result=40
14:45:47 Set A/D channel type result=40
14:45:47 Set A/D encoding result=40
14:45:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:45:47 Set channel filter=0.000000e+000  result=40
14:45:47 Config A/D  Result=40
14:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:45:47 Get A/D filter: -9.255963e+061  result=40
14:45:47 Get A/D value=-858993460  result=40
14:45:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:45:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:45:47 Parameters OK
14:45:47 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:45:47 Set A/D data flow result=40
14:45:47 Set A/D channel type result=40
14:45:47 Set A/D encoding result=40
14:45:47 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:45:47 Set channel filter=0.000000e+000  result=40
14:45:47 Config A/D  Result=40
14:45:47 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:45:47 Get A/D filter: -9.255963e+061  result=40
14:45:47 Get A/D value=-858993460  result=40
14:45:47 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:45:47 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:45:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:45:47 Aux=
14:45:47 Message to Camera, serial 197003 queued
14:46:24 Received message from Master: op=PointingHead serial=197016
14:46:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:46:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:46:24 Point started: ret=0
14:46:24 point_skyscan result=0
14:46:25 Check angles
14:46:25 SkyScan query
14:46:25 SkyScan query done: ret=0  az=152.775<-10185  ze=6.51<-11566  Statuses=0009 0008
14:46:25 Msec=0  True Az=152.775  Ze=6.51  Az status=0009  Ze status=0008
14:46:26 Check angles
14:46:26 SkyScan query
14:46:26 SkyScan query done: ret=0  az=135.315<-9021  ze=6.495<-11567  Statuses=0009 0008
14:46:26 Msec=750  True Az=135.315  Ze=6.495  Az status=0009  Ze status=0008
14:46:26 Check angles
14:46:26 SkyScan query
14:46:27 SkyScan query done: ret=0  az=117.495<-7833  ze=6.495<-11567  Statuses=0009 0008
14:46:27 Msec=1500  True Az=117.495  Ze=6.495  Az status=0009  Ze status=0008
14:46:27 Check angles
14:46:27 SkyScan query
14:46:28 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:46:28 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:46:28 Message to Master queued w/err=0: serial=197016 error=0
14:46:33 Received message from Master: op=Filter serial=197017
14:46:33 Color wheel filter change from 0 to 0
14:46:33 FLIGetFilterPos err=0  currentPosition=0
14:46:33 FLIGetStepsRemaining err=0  RemainingSteps=0
14:46:33 Filter is already there-color wheel unchanged
14:46:33 Received message from Master: op=Shutter serial=197018
14:46:33 Shutter LASER close
14:46:33 Received message from Camera: op=State serial=197020
14:46:33 GetSingleValue result=40  Value=cccccccc
14:46:33 SkyScan query
14:46:33 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:46:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:46:33 Parameters OK
14:46:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:46:33 Set A/D data flow result=40
14:46:33 Set A/D channel type result=40
14:46:33 Set A/D encoding result=40
14:46:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:46:33 Set channel filter=0.000000e+000  result=40
14:46:33 Config A/D  Result=40
14:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:46:33 Get A/D filter: -9.255963e+061  result=40
14:46:33 Get A/D value=-858993460  result=40
14:46:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:46:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:46:33 Parameters OK
14:46:33 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:46:33 Set A/D data flow result=40
14:46:33 Set A/D channel type result=40
14:46:33 Set A/D encoding result=40
14:46:33 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:46:33 Set channel filter=0.000000e+000  result=40
14:46:33 Config A/D  Result=40
14:46:33 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:46:33 Get A/D filter: -9.255963e+061  result=40
14:46:33 Get A/D value=-858993460  result=40
14:46:33 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:46:33 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:46:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:46:33 Aux=
14:46:33 Message to Camera, serial 197020 queued
14:47:10 Received message from Master: op=PointingHead serial=197033
14:47:10 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:47:10 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:47:11 Point started: ret=0
14:47:11 point_skyscan result=0
14:47:11 Check angles
14:47:11 SkyScan query
14:47:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.175<-13545  Statuses=0008 0009
14:47:12 Msec=0  True Az=112.995  Ze=-23.175  Az status=0008  Ze status=0009
14:47:12 Check angles
14:47:12 SkyScan query
14:47:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.16<-14944  Statuses=0008 0009
14:47:13 Msec=750  True Az=112.995  Ze=-44.16  Az status=0008  Ze status=0009
14:47:13 Check angles
14:47:13 SkyScan query
14:47:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.1<-16340  Statuses=0008 0009
14:47:13 Msec=1500  True Az=112.995  Ze=-65.1  Az status=0008  Ze status=0009
14:47:14 Check angles
14:47:14 SkyScan query
14:47:14 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.07<-17738  Statuses=0008 0009
14:47:14 Msec=2250  True Az=112.995  Ze=-86.07  Az status=0008  Ze status=0009
14:47:14 Check angles
14:47:14 SkyScan query
14:47:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.445<-19163  Statuses=0008 0009
14:47:15 Msec=3000  True Az=112.995  Ze=-107.445  Az status=0008  Ze status=0009
14:47:15 Check angles
14:47:15 SkyScan query
14:47:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.385<-20559  Statuses=0008 0009
14:47:16 Msec=3750  True Az=112.995  Ze=-128.385  Az status=0008  Ze status=0009
14:47:16 Check angles
14:47:16 SkyScan query
14:47:16 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.355<-21957  Statuses=0008 0009
14:47:16 Msec=4500  True Az=112.995  Ze=-149.355  Az status=0008  Ze status=0009
14:47:17 Check angles
14:47:17 SkyScan query
14:47:17 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.685<-23379  Statuses=0008 0009
14:47:17 Msec=5250  True Az=112.995  Ze=-170.685  Az status=0008  Ze status=0009
14:47:17 Check angles
14:47:17 SkyScan query
14:47:18 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:47:18 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:47:18 Message to Master queued w/err=0: serial=197033 error=0
14:47:23 Received message from Master: op=Filter serial=197034
14:47:23 Color wheel filter change from 0 to 0
14:47:23 FLIGetFilterPos err=0  currentPosition=0
14:47:23 FLIGetStepsRemaining err=0  RemainingSteps=0
14:47:23 Filter is already there-color wheel unchanged
14:47:23 Received message from Master: op=Shutter serial=197035
14:47:23 Shutter LASER open
14:47:23 Received message from Camera: op=State serial=197037
14:47:23 GetSingleValue result=40  Value=cccccccc
14:47:23 SkyScan query
14:47:24 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:47:24 Parameters OK
14:47:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:47:24 Set A/D data flow result=40
14:47:24 Set A/D channel type result=40
14:47:24 Set A/D encoding result=40
14:47:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:47:24 Set channel filter=0.000000e+000  result=40
14:47:24 Config A/D  Result=40
14:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:47:24 Get A/D filter: -9.255963e+061  result=40
14:47:24 Get A/D value=-858993460  result=40
14:47:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:47:24 Parameters OK
14:47:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:47:24 Set A/D data flow result=40
14:47:24 Set A/D channel type result=40
14:47:24 Set A/D encoding result=40
14:47:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:47:24 Set channel filter=0.000000e+000  result=40
14:47:24 Config A/D  Result=40
14:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:47:24 Get A/D filter: -9.255963e+061  result=40
14:47:24 Get A/D value=-858993460  result=40
14:47:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:47:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:47:24 Aux=
14:47:24 Message to Camera, serial 197037 queued
14:47:32 Received message from Master: op=Shutter serial=197047
14:47:32 Shutter LASER close
14:47:33 Received message from Master: op=PointingHead serial=197051
14:47:33 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:47:33 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:47:33 Point started: ret=0
14:47:33 point_skyscan result=0
14:47:34 Check angles
14:47:34 SkyScan query
14:47:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.43<-21562  Statuses=0008 0009
14:47:34 Msec=0  True Az=112.995  Ze=-143.43  Az status=0008  Ze status=0009
14:47:35 Check angles
14:47:35 SkyScan query
14:47:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.49<-20166  Statuses=0008 0009
14:47:35 Msec=750  True Az=112.995  Ze=-122.49  Az status=0008  Ze status=0009
14:47:35 Check angles
14:47:35 SkyScan query
14:47:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.52<-18768  Statuses=0008 0009
14:47:36 Msec=1500  True Az=112.995  Ze=-101.52  Az status=0008  Ze status=0009
14:47:36 Check angles
14:47:36 SkyScan query
14:47:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.535<-17369  Statuses=0008 0009
14:47:37 Msec=2250  True Az=112.995  Ze=-80.535  Az status=0008  Ze status=0009
14:47:37 Check angles
14:47:37 SkyScan query
14:47:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.19<-15946  Statuses=0008 0009
14:47:37 Msec=3000  True Az=112.995  Ze=-59.19  Az status=0008  Ze status=0009
14:47:38 Check angles
14:47:38 SkyScan query
14:47:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.205<-14547  Statuses=0008 0009
14:47:38 Msec=3750  True Az=112.995  Ze=-38.205  Az status=0008  Ze status=0009
14:47:38 Check angles
14:47:38 SkyScan query
14:47:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.265<-13151  Statuses=0008 0009
14:47:39 Msec=4500  True Az=112.995  Ze=-17.265  Az status=0008  Ze status=0009
14:47:39 Check angles
14:47:39 SkyScan query
14:47:40 SkyScan query done: ret=0  az=112.995<-7533  ze=4.11<-11726  Statuses=0008 0009
14:47:40 Msec=5250  True Az=112.995  Ze=4.11  Az status=0008  Ze status=0009
14:47:40 Check angles
14:47:40 SkyScan query
14:47:40 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:47:40 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:47:40 Message to Master queued w/err=0: serial=197051 error=0
14:47:45 Received message from Master: op=Filter serial=197052
14:47:45 Color wheel filter change from 0 to 0
14:47:45 FLIGetFilterPos err=0  currentPosition=0
14:47:45 FLIGetStepsRemaining err=0  RemainingSteps=0
14:47:45 Filter is already there-color wheel unchanged
14:47:46 Received message from Master: op=Shutter serial=197053
14:47:46 Shutter LASER close
14:47:46 Received message from Camera: op=State serial=197055
14:47:46 GetSingleValue result=40  Value=cccccccc
14:47:46 SkyScan query
14:47:46 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:47:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:47:46 Parameters OK
14:47:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:47:46 Set A/D data flow result=40
14:47:46 Set A/D channel type result=40
14:47:46 Set A/D encoding result=40
14:47:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:47:46 Set channel filter=0.000000e+000  result=40
14:47:46 Config A/D  Result=40
14:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:47:46 Get A/D filter: -9.255963e+061  result=40
14:47:46 Get A/D value=-858993460  result=40
14:47:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:47:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:47:46 Parameters OK
14:47:46 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:47:46 Set A/D data flow result=40
14:47:46 Set A/D channel type result=40
14:47:46 Set A/D encoding result=40
14:47:46 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:47:46 Set channel filter=0.000000e+000  result=40
14:47:46 Config A/D  Result=40
14:47:46 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:47:46 Get A/D filter: -9.255963e+061  result=40
14:47:46 Get A/D value=-858993460  result=40
14:47:46 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:47:46 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:47:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:47:46 Aux=
14:47:46 Message to Camera, serial 197055 queued
14:48:23 Received message from Master: op=PointingHead serial=197068
14:48:23 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:48:23 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:48:24 Point started: ret=0
14:48:24 point_skyscan result=0
14:48:24 Check angles
14:48:24 SkyScan query
14:48:25 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:48:25 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:48:25 Message to Master queued w/err=0: serial=197068 error=0
14:48:30 Received message from Master: op=Filter serial=197069
14:48:30 Color wheel filter change from 0 to 0
14:48:30 FLIGetFilterPos err=0  currentPosition=0
14:48:30 FLIGetStepsRemaining err=0  RemainingSteps=0
14:48:30 Filter is already there-color wheel unchanged
14:48:30 Received message from Master: op=Shutter serial=197070
14:48:30 Shutter LASER close
14:48:30 Received message from Camera: op=State serial=197072
14:48:30 GetSingleValue result=40  Value=cccccccc
14:48:30 SkyScan query
14:48:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:48:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:48:31 Parameters OK
14:48:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:48:31 Set A/D data flow result=40
14:48:31 Set A/D channel type result=40
14:48:31 Set A/D encoding result=40
14:48:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:48:31 Set channel filter=0.000000e+000  result=40
14:48:31 Config A/D  Result=40
14:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:48:31 Get A/D filter: -9.255963e+061  result=40
14:48:31 Get A/D value=-858993460  result=40
14:48:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:48:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:48:31 Parameters OK
14:48:31 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:48:31 Set A/D data flow result=40
14:48:31 Set A/D channel type result=40
14:48:31 Set A/D encoding result=40
14:48:31 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:48:31 Set channel filter=0.000000e+000  result=40
14:48:31 Config A/D  Result=40
14:48:31 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:48:31 Get A/D filter: -9.255963e+061  result=40
14:48:31 Get A/D value=-858993460  result=40
14:48:31 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:48:31 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:48:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:48:31 Aux=
14:48:31 Message to Camera, serial 197072 queued
14:49:08 Received message from Master: op=PointingHead serial=197085
14:49:08 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:49:08 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:49:08 Point started: ret=0
14:49:08 point_skyscan result=0
14:49:09 Check angles
14:49:09 SkyScan query
14:49:09 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:49:09 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:49:09 Message to Master queued w/err=0: serial=197085 error=0
14:49:14 Received message from Master: op=Filter serial=197086
14:49:14 Color wheel filter change from 0 to 0
14:49:14 FLIGetFilterPos err=0  currentPosition=0
14:49:14 FLIGetStepsRemaining err=0  RemainingSteps=0
14:49:14 Filter is already there-color wheel unchanged
14:49:14 Received message from Master: op=Shutter serial=197087
14:49:14 Shutter LASER close
14:49:14 Received message from Camera: op=State serial=197089
14:49:14 GetSingleValue result=40  Value=cccccccc
14:49:14 SkyScan query
14:49:15 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:49:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:49:15 Parameters OK
14:49:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:49:15 Set A/D data flow result=40
14:49:15 Set A/D channel type result=40
14:49:15 Set A/D encoding result=40
14:49:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:49:15 Set channel filter=0.000000e+000  result=40
14:49:15 Config A/D  Result=40
14:49:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:49:15 Get A/D filter: -9.255963e+061  result=40
14:49:15 Get A/D value=-858993460  result=40
14:49:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:49:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:49:15 Parameters OK
14:49:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:49:15 Set A/D data flow result=40
14:49:15 Set A/D channel type result=40
14:49:15 Set A/D encoding result=40
14:49:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:49:15 Set channel filter=0.000000e+000  result=40
14:49:15 Config A/D  Result=40
14:49:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:49:15 Get A/D filter: -9.255963e+061  result=40
14:49:15 Get A/D value=-858993460  result=40
14:49:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:49:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:49:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:49:15 Aux=
14:49:15 Message to Camera, serial 197089 queued
14:49:52 Received message from Master: op=PointingHead serial=197102
14:49:52 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:49:52 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:49:52 Point started: ret=0
14:49:52 point_skyscan result=0
14:49:53 Check angles
14:49:53 SkyScan query
14:49:54 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:49:54 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:49:54 Message to Master queued w/err=0: serial=197102 error=0
14:49:59 Received message from Master: op=Filter serial=197103
14:49:59 Color wheel filter change from 0 to 0
14:49:59 FLIGetFilterPos err=0  currentPosition=0
14:49:59 FLIGetStepsRemaining err=0  RemainingSteps=0
14:49:59 Filter is already there-color wheel unchanged
14:49:59 Received message from Master: op=Shutter serial=197104
14:49:59 Shutter LASER close
14:49:59 Received message from Camera: op=State serial=197106
14:49:59 GetSingleValue result=40  Value=cccccccc
14:49:59 SkyScan query
14:49:59 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:49:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:49:59 Parameters OK
14:49:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:49:59 Set A/D data flow result=40
14:49:59 Set A/D channel type result=40
14:49:59 Set A/D encoding result=40
14:49:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:49:59 Set channel filter=0.000000e+000  result=40
14:49:59 Config A/D  Result=40
14:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:49:59 Get A/D filter: -9.255963e+061  result=40
14:49:59 Get A/D value=-858993460  result=40
14:49:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:49:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:49:59 Parameters OK
14:49:59 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:49:59 Set A/D data flow result=40
14:49:59 Set A/D channel type result=40
14:49:59 Set A/D encoding result=40
14:49:59 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:49:59 Set channel filter=0.000000e+000  result=40
14:49:59 Config A/D  Result=40
14:49:59 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:49:59 Get A/D filter: -9.255963e+061  result=40
14:49:59 Get A/D value=-858993460  result=40
14:49:59 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:49:59 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:49:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:49:59 Aux=
14:49:59 Message to Camera, serial 197106 queued
14:50:36 Received message from Master: op=PointingHead serial=197119
14:50:36 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:50:36 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:50:36 Point started: ret=0
14:50:36 point_skyscan result=0
14:50:37 Check angles
14:50:37 SkyScan query
14:50:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.04<-13536  Statuses=0008 0009
14:50:38 Msec=0  True Az=112.995  Ze=-23.04  Az status=0008  Ze status=0009
14:50:38 Check angles
14:50:38 SkyScan query
14:50:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.01<-14934  Statuses=0008 0009
14:50:39 Msec=750  True Az=112.995  Ze=-44.01  Az status=0008  Ze status=0009
14:50:39 Check angles
14:50:39 SkyScan query
14:50:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-64.98<-16332  Statuses=0008 0009
14:50:39 Msec=1500  True Az=112.995  Ze=-64.98  Az status=0008  Ze status=0009
14:50:39 Check angles
14:50:39 SkyScan query
14:50:40 SkyScan query done: ret=0  az=112.995<-7533  ze=-85.935<-17729  Statuses=0008 0009
14:50:40 Msec=2250  True Az=112.995  Ze=-85.935  Az status=0008  Ze status=0009
14:50:40 Check angles
14:50:40 SkyScan query
14:50:41 SkyScan query done: ret=0  az=112.995<-7533  ze=-106.875<-19125  Statuses=0008 0009
14:50:41 Msec=3000  True Az=112.995  Ze=-106.875  Az status=0008  Ze status=0009
14:50:41 Check angles
14:50:41 SkyScan query
14:50:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-127.845<-20523  Statuses=0008 0009
14:50:42 Msec=3750  True Az=112.995  Ze=-127.845  Az status=0008  Ze status=0009
14:50:42 Check angles
14:50:42 SkyScan query
14:50:42 SkyScan query done: ret=0  az=112.995<-7533  ze=-148.785<-21919  Statuses=0008 0009
14:50:42 Msec=4500  True Az=112.995  Ze=-148.785  Az status=0008  Ze status=0009
14:50:42 Check angles
14:50:42 SkyScan query
14:50:43 SkyScan query done: ret=0  az=112.995<-7533  ze=-169.725<-23315  Statuses=0008 0009
14:50:43 Msec=5250  True Az=112.995  Ze=-169.725  Az status=0008  Ze status=0009
14:50:43 Check angles
14:50:43 SkyScan query
14:50:44 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:50:44 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:50:44 Message to Master queued w/err=0: serial=197119 error=0
14:50:49 Received message from Master: op=Filter serial=197120
14:50:49 Color wheel filter change from 0 to 0
14:50:49 FLIGetFilterPos err=0  currentPosition=0
14:50:49 FLIGetStepsRemaining err=0  RemainingSteps=0
14:50:49 Filter is already there-color wheel unchanged
14:50:49 Received message from Master: op=Shutter serial=197121
14:50:49 Shutter LASER open
14:50:49 Received message from Camera: op=State serial=197123
14:50:49 GetSingleValue result=40  Value=cccccccc
14:50:49 SkyScan query
14:50:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:50:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:50:50 Parameters OK
14:50:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:50:50 Set A/D data flow result=40
14:50:50 Set A/D channel type result=40
14:50:50 Set A/D encoding result=40
14:50:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:50:50 Set channel filter=0.000000e+000  result=40
14:50:50 Config A/D  Result=40
14:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:50:50 Get A/D filter: -9.255963e+061  result=40
14:50:50 Get A/D value=-858993460  result=40
14:50:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:50:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:50:50 Parameters OK
14:50:50 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:50:50 Set A/D data flow result=40
14:50:50 Set A/D channel type result=40
14:50:50 Set A/D encoding result=40
14:50:50 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:50:50 Set channel filter=0.000000e+000  result=40
14:50:50 Config A/D  Result=40
14:50:50 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:50:50 Get A/D filter: -9.255963e+061  result=40
14:50:50 Get A/D value=-858993460  result=40
14:50:50 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:50:50 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:50:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:50:50 Aux=
14:50:50 Message to Camera, serial 197123 queued
14:50:58 Received message from Master: op=Shutter serial=197133
14:50:58 Shutter LASER close
14:50:59 Received message from Master: op=PointingHead serial=197137
14:50:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:50:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:50:59 Point started: ret=0
14:50:59 point_skyscan result=0
14:51:00 Check angles
14:51:00 SkyScan query
14:51:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.175<-21545  Statuses=0008 0009
14:51:00 Msec=0  True Az=112.995  Ze=-143.175  Az status=0008  Ze status=0009
14:51:01 Check angles
14:51:01 SkyScan query
14:51:01 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
14:51:01 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
14:51:01 Check angles
14:51:01 SkyScan query
14:51:02 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.28<-18752  Statuses=0008 0009
14:51:02 Msec=1500  True Az=112.995  Ze=-101.28  Az status=0008  Ze status=0009
14:51:02 Check angles
14:51:02 SkyScan query
14:51:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.31<-17354  Statuses=0008 0009
14:51:03 Msec=2250  True Az=112.995  Ze=-80.31  Az status=0008  Ze status=0009
14:51:03 Check angles
14:51:03 SkyScan query
14:51:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.355<-15957  Statuses=0008 0009
14:51:03 Msec=3000  True Az=112.995  Ze=-59.355  Az status=0008  Ze status=0009
14:51:04 Check angles
14:51:04 SkyScan query
14:51:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.385<-14559  Statuses=0008 0009
14:51:04 Msec=3750  True Az=112.995  Ze=-38.385  Az status=0008  Ze status=0009
14:51:04 Check angles
14:51:04 SkyScan query
14:51:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.445<-13163  Statuses=0008 0009
14:51:05 Msec=4500  True Az=112.995  Ze=-17.445  Az status=0008  Ze status=0009
14:51:05 Check angles
14:51:05 SkyScan query
14:51:06 SkyScan query done: ret=0  az=112.995<-7533  ze=3.495<-11767  Statuses=0008 0009
14:51:06 Msec=5250  True Az=112.995  Ze=3.495  Az status=0008  Ze status=0009
14:51:06 Check angles
14:51:06 SkyScan query
14:51:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:51:06 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:51:06 Message to Master queued w/err=0: serial=197137 error=0
14:51:11 Received message from Master: op=Filter serial=197138
14:51:11 Color wheel filter change from 0 to 0
14:51:11 FLIGetFilterPos err=0  currentPosition=0
14:51:11 FLIGetStepsRemaining err=0  RemainingSteps=0
14:51:11 Filter is already there-color wheel unchanged
14:51:12 Received message from Master: op=Shutter serial=197139
14:51:12 Shutter LASER close
14:51:12 Received message from Camera: op=State serial=197141
14:51:12 GetSingleValue result=40  Value=cccccccc
14:51:12 SkyScan query
14:51:12 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:51:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:51:12 Parameters OK
14:51:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:51:12 Set A/D data flow result=40
14:51:12 Set A/D channel type result=40
14:51:12 Set A/D encoding result=40
14:51:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:51:12 Set channel filter=0.000000e+000  result=40
14:51:12 Config A/D  Result=40
14:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:51:12 Get A/D filter: -9.255963e+061  result=40
14:51:12 Get A/D value=-858993460  result=40
14:51:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:51:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:51:12 Parameters OK
14:51:12 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:51:12 Set A/D data flow result=40
14:51:12 Set A/D channel type result=40
14:51:12 Set A/D encoding result=40
14:51:12 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:51:12 Set channel filter=0.000000e+000  result=40
14:51:12 Config A/D  Result=40
14:51:12 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:51:12 Get A/D filter: -9.255963e+061  result=40
14:51:12 Get A/D value=-858993460  result=40
14:51:12 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:51:12 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:51:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:51:12 Aux=
14:51:12 Message to Camera, serial 197141 queued
14:51:49 Received message from Master: op=PointingHead serial=197154
14:51:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:51:49 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:51:50 Point started: ret=0
14:51:50 point_skyscan result=0
14:51:50 Check angles
14:51:50 SkyScan query
14:51:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:51:51 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:51:51 Message to Master queued w/err=0: serial=197154 error=0
14:51:56 Received message from Master: op=Filter serial=197155
14:51:56 Color wheel filter change from 0 to 0
14:51:56 FLIGetFilterPos err=0  currentPosition=0
14:51:56 FLIGetStepsRemaining err=0  RemainingSteps=0
14:51:56 Filter is already there-color wheel unchanged
14:51:56 Received message from Master: op=Shutter serial=197156
14:51:56 Shutter LASER close
14:51:56 Received message from Camera: op=State serial=197158
14:51:56 GetSingleValue result=40  Value=cccccccc
14:51:56 SkyScan query
14:51:57 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:51:57 Parameters OK
14:51:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:51:57 Set A/D data flow result=40
14:51:57 Set A/D channel type result=40
14:51:57 Set A/D encoding result=40
14:51:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:51:57 Set channel filter=0.000000e+000  result=40
14:51:57 Config A/D  Result=40
14:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:51:57 Get A/D filter: -9.255963e+061  result=40
14:51:57 Get A/D value=-858993460  result=40
14:51:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:51:57 Parameters OK
14:51:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:51:57 Set A/D data flow result=40
14:51:57 Set A/D channel type result=40
14:51:57 Set A/D encoding result=40
14:51:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:51:57 Set channel filter=0.000000e+000  result=40
14:51:57 Config A/D  Result=40
14:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:51:57 Get A/D filter: -9.255963e+061  result=40
14:51:57 Get A/D value=-858993460  result=40
14:51:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:51:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:51:57 Aux=
14:51:57 Message to Camera, serial 197158 queued
14:52:33 Received message from Master: op=PointingHead serial=197171
14:52:33 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:52:33 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:52:34 Point started: ret=0
14:52:34 point_skyscan result=0
14:52:35 Check angles
14:52:35 SkyScan query
14:52:35 SkyScan query done: ret=0  az=136.335<-9089  ze=-6.51<-12434  Statuses=0009 0008
14:52:35 Msec=0  True Az=136.335  Ze=-6.51  Az status=0009  Ze status=0008
14:52:35 Check angles
14:52:35 SkyScan query
14:52:36 SkyScan query done: ret=0  az=153.9<-10260  ze=-6.495<-12433  Statuses=0009 0008
14:52:36 Msec=750  True Az=153.9  Ze=-6.495  Az status=0009  Ze status=0008
14:52:36 Check angles
14:52:36 SkyScan query
14:52:37 SkyScan query done: ret=0  az=171.285<-11419  ze=-6.495<-12433  Statuses=0009 0008
14:52:37 Msec=1500  True Az=171.285  Ze=-6.495  Az status=0009  Ze status=0008
14:52:37 Check angles
14:52:37 SkyScan query
14:52:37 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:52:37 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:52:37 Message to Master queued w/err=0: serial=197171 error=0
14:52:42 Received message from Master: op=Filter serial=197172
14:52:42 Color wheel filter change from 0 to 0
14:52:42 FLIGetFilterPos err=0  currentPosition=0
14:52:42 FLIGetStepsRemaining err=0  RemainingSteps=0
14:52:42 Filter is already there-color wheel unchanged
14:52:43 Received message from Master: op=Shutter serial=197173
14:52:43 Shutter LASER close
14:52:43 Received message from Camera: op=State serial=197175
14:52:43 GetSingleValue result=40  Value=cccccccc
14:52:43 SkyScan query
14:52:43 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:52:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:52:43 Parameters OK
14:52:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:52:43 Set A/D data flow result=40
14:52:43 Set A/D channel type result=40
14:52:43 Set A/D encoding result=40
14:52:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:52:43 Set channel filter=0.000000e+000  result=40
14:52:43 Config A/D  Result=40
14:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:52:43 Get A/D filter: -9.255963e+061  result=40
14:52:43 Get A/D value=-858993460  result=40
14:52:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:52:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:52:43 Parameters OK
14:52:43 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:52:43 Set A/D data flow result=40
14:52:43 Set A/D channel type result=40
14:52:43 Set A/D encoding result=40
14:52:43 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:52:43 Set channel filter=0.000000e+000  result=40
14:52:43 Config A/D  Result=40
14:52:43 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:52:43 Get A/D filter: -9.255963e+061  result=40
14:52:43 Get A/D value=-858993460  result=40
14:52:43 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:52:43 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:52:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:52:43 Aux=
14:52:43 Message to Camera, serial 197175 queued
14:53:19 Received message from Master: op=PointingHead serial=197187
14:53:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:53:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:53:19 Point started: ret=0
14:53:19 point_skyscan result=0
14:53:20 Check angles
14:53:20 SkyScan query
14:53:21 SkyScan query done: ret=0  az=152.865<-10191  ze=6.51<-11566  Statuses=0009 0008
14:53:21 Msec=0  True Az=152.865  Ze=6.51  Az status=0009  Ze status=0008
14:53:21 Check angles
14:53:21 SkyScan query
14:53:22 SkyScan query done: ret=0  az=135.075<-9005  ze=6.495<-11567  Statuses=0009 0008
14:53:22 Msec=750  True Az=135.075  Ze=6.495  Az status=0009  Ze status=0008
14:53:22 Check angles
14:53:22 SkyScan query
14:53:22 SkyScan query done: ret=0  az=117.615<-7841  ze=6.495<-11567  Statuses=0009 0008
14:53:22 Msec=1500  True Az=117.615  Ze=6.495  Az status=0009  Ze status=0008
14:53:22 Check angles
14:53:22 SkyScan query
14:53:23 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:53:23 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:53:23 Message to Master queued w/err=0: serial=197187 error=0
14:53:28 Received message from Master: op=Filter serial=197188
14:53:28 Color wheel filter change from 0 to 0
14:53:28 FLIGetFilterPos err=0  currentPosition=0
14:53:28 FLIGetStepsRemaining err=0  RemainingSteps=0
14:53:28 Filter is already there-color wheel unchanged
14:53:28 Received message from Master: op=Shutter serial=197189
14:53:28 Shutter LASER close
14:53:28 Received message from Camera: op=State serial=197191
14:53:28 GetSingleValue result=40  Value=cccccccc
14:53:28 SkyScan query
14:53:29 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:53:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:53:29 Parameters OK
14:53:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:53:29 Set A/D data flow result=40
14:53:29 Set A/D channel type result=40
14:53:29 Set A/D encoding result=40
14:53:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:53:29 Set channel filter=0.000000e+000  result=40
14:53:29 Config A/D  Result=40
14:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:53:29 Get A/D filter: -9.255963e+061  result=40
14:53:29 Get A/D value=-858993460  result=40
14:53:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:53:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:53:29 Parameters OK
14:53:29 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:53:29 Set A/D data flow result=40
14:53:29 Set A/D channel type result=40
14:53:29 Set A/D encoding result=40
14:53:29 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:53:29 Set channel filter=0.000000e+000  result=40
14:53:29 Config A/D  Result=40
14:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:53:29 Get A/D filter: -9.255963e+061  result=40
14:53:29 Get A/D value=-858993460  result=40
14:53:29 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:53:29 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:53:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:53:29 Aux=
14:53:29 Message to Camera, serial 197191 queued
14:54:06 Received message from Master: op=PointingHead serial=197204
14:54:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:54:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:54:06 Point started: ret=0
14:54:06 point_skyscan result=0
14:54:07 Check angles
14:54:07 SkyScan query
14:54:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.415<-13561  Statuses=0008 0009
14:54:07 Msec=0  True Az=112.995  Ze=-23.415  Az status=0008  Ze status=0009
14:54:08 Check angles
14:54:08 SkyScan query
14:54:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.82<-14988  Statuses=0008 0009
14:54:08 Msec=750  True Az=112.995  Ze=-44.82  Az status=0008  Ze status=0009
14:54:08 Check angles
14:54:08 SkyScan query
14:54:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.775<-16385  Statuses=0008 0009
14:54:09 Msec=1500  True Az=112.995  Ze=-65.775  Az status=0008  Ze status=0009
14:54:09 Check angles
14:54:09 SkyScan query
14:54:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.7<-17780  Statuses=0008 0009
14:54:10 Msec=2250  True Az=112.995  Ze=-86.7  Az status=0008  Ze status=0009
14:54:10 Check angles
14:54:10 SkyScan query
14:54:10 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.67<-19178  Statuses=0008 0009
14:54:10 Msec=3000  True Az=112.995  Ze=-107.67  Az status=0008  Ze status=0009
14:54:11 Check angles
14:54:11 SkyScan query
14:54:11 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.045<-20603  Statuses=0008 0009
14:54:11 Msec=3750  True Az=112.995  Ze=-129.045  Az status=0008  Ze status=0009
14:54:11 Check angles
[UTC 2019-3-9  14:54:11]
14:54:11 SkyScan query
14:54:12 SkyScan query done: ret=0  az=112.995<-7533  ze=-151.755<-22117  Statuses=0008 0009
14:54:12 Msec=4500  True Az=112.995  Ze=-151.755  Az status=0008  Ze status=0009
14:54:12 Check angles
14:54:12 SkyScan query
14:54:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.865<-23391  Statuses=0008 0009
14:54:13 Msec=5250  True Az=112.995  Ze=-170.865  Az status=0008  Ze status=0009
14:54:13 Check angles
14:54:13 SkyScan query
14:54:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:54:13 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:54:13 Message to Master queued w/err=0: serial=197204 error=0
14:54:18 Received message from Master: op=Filter serial=197205
14:54:18 Color wheel filter change from 0 to 0
14:54:18 FLIGetFilterPos err=0  currentPosition=0
14:54:18 FLIGetStepsRemaining err=0  RemainingSteps=0
14:54:18 Filter is already there-color wheel unchanged
14:54:19 Received message from Master: op=Shutter serial=197206
14:54:19 Shutter LASER open
14:54:19 Received message from Camera: op=State serial=197208
14:54:19 GetSingleValue result=40  Value=cccccccc
14:54:19 SkyScan query
14:54:19 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:54:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:54:19 Parameters OK
14:54:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:54:19 Set A/D data flow result=40
14:54:19 Set A/D channel type result=40
14:54:19 Set A/D encoding result=40
14:54:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:54:19 Set channel filter=0.000000e+000  result=40
14:54:19 Config A/D  Result=40
14:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:54:19 Get A/D filter: -9.255963e+061  result=40
14:54:19 Get A/D value=-858993460  result=40
14:54:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:54:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:54:19 Parameters OK
14:54:19 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:54:19 Set A/D data flow result=40
14:54:19 Set A/D channel type result=40
14:54:19 Set A/D encoding result=40
14:54:19 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:54:19 Set channel filter=0.000000e+000  result=40
14:54:19 Config A/D  Result=40
14:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:54:19 Get A/D filter: -9.255963e+061  result=40
14:54:19 Get A/D value=-858993460  result=40
14:54:19 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:54:19 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:54:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:54:19 Aux=
14:54:19 Message to Camera, serial 197208 queued
14:54:28 Received message from Master: op=Shutter serial=197218
14:54:28 Shutter LASER close
14:54:28 Received message from Master: op=PointingHead serial=197222
14:54:28 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:54:28 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:54:29 Point started: ret=0
14:54:29 point_skyscan result=0
14:54:29 Check angles
14:54:29 SkyScan query
14:54:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.535<-21569  Statuses=0008 0009
14:54:30 Msec=0  True Az=112.995  Ze=-143.535  Az status=0008  Ze status=0009
14:54:30 Check angles
14:54:30 SkyScan query
14:54:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.595<-20173  Statuses=0008 0009
14:54:31 Msec=750  True Az=112.995  Ze=-122.595  Az status=0008  Ze status=0009
14:54:31 Check angles
14:54:31 SkyScan query
14:54:31 SkyScan query done: ret=0  az=112.995<-7533  ze=-101.625<-18775  Statuses=0008 0009
14:54:31 Msec=1500  True Az=112.995  Ze=-101.625  Az status=0008  Ze status=0009
14:54:32 Check angles
14:54:32 SkyScan query
14:54:32 SkyScan query done: ret=0  az=112.995<-7533  ze=-80.625<-17375  Statuses=0008 0009
14:54:32 Msec=2250  True Az=112.995  Ze=-80.625  Az status=0008  Ze status=0009
14:54:32 Check angles
14:54:32 SkyScan query
14:54:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-59.7<-15980  Statuses=0008 0009
14:54:33 Msec=3000  True Az=112.995  Ze=-59.7  Az status=0008  Ze status=0009
14:54:33 Check angles
14:54:33 SkyScan query
14:54:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-38.745<-14583  Statuses=0008 0009
14:54:34 Msec=3750  True Az=112.995  Ze=-38.745  Az status=0008  Ze status=0009
14:54:34 Check angles
14:54:34 SkyScan query
14:54:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-17.37<-13158  Statuses=0008 0009
14:54:34 Msec=4500  True Az=112.995  Ze=-17.37  Az status=0008  Ze status=0009
14:54:35 Check angles
14:54:35 SkyScan query
14:54:35 SkyScan query done: ret=0  az=112.995<-7533  ze=3.615<-11759  Statuses=0008 0009
14:54:35 Msec=5250  True Az=112.995  Ze=3.615  Az status=0008  Ze status=0009
14:54:35 Check angles
14:54:35 SkyScan query
14:54:36 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:54:36 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:54:36 Message to Master queued w/err=0: serial=197222 error=0
14:54:41 Received message from Master: op=Filter serial=197223
14:54:41 Color wheel filter change from 0 to 0
14:54:41 FLIGetFilterPos err=0  currentPosition=0
14:54:41 FLIGetStepsRemaining err=0  RemainingSteps=0
14:54:41 Filter is already there-color wheel unchanged
14:54:41 Received message from Master: op=Shutter serial=197224
14:54:41 Shutter LASER close
14:54:41 Received message from Camera: op=State serial=197226
14:54:41 GetSingleValue result=40  Value=cccccccc
14:54:41 SkyScan query
14:54:42 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:54:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:54:42 Parameters OK
14:54:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:54:42 Set A/D data flow result=40
14:54:42 Set A/D channel type result=40
14:54:42 Set A/D encoding result=40
14:54:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:54:42 Set channel filter=0.000000e+000  result=40
14:54:42 Config A/D  Result=40
14:54:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:54:42 Get A/D filter: -9.255963e+061  result=40
14:54:42 Get A/D value=-858993460  result=40
14:54:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:54:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:54:42 Parameters OK
14:54:42 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:54:42 Set A/D data flow result=40
14:54:42 Set A/D channel type result=40
14:54:42 Set A/D encoding result=40
14:54:42 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:54:42 Set channel filter=0.000000e+000  result=40
14:54:42 Config A/D  Result=40
14:54:42 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:54:42 Get A/D filter: -9.255963e+061  result=40
14:54:42 Get A/D value=-858993460  result=40
14:54:42 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:54:42 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:54:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:54:42 Aux=
14:54:42 Message to Camera, serial 197226 queued
14:55:19 Received message from Master: op=PointingHead serial=197239
14:55:19 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:55:19 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:55:19 Point started: ret=0
14:55:19 point_skyscan result=0
14:55:20 Check angles
14:55:20 SkyScan query
14:55:20 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:55:20 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:55:20 Message to Master queued w/err=0: serial=197239 error=0
14:55:25 Received message from Master: op=Filter serial=197240
14:55:25 Color wheel filter change from 0 to 0
14:55:25 FLIGetFilterPos err=0  currentPosition=0
14:55:25 FLIGetStepsRemaining err=0  RemainingSteps=0
14:55:25 Filter is already there-color wheel unchanged
14:55:26 Received message from Master: op=Shutter serial=197241
14:55:26 Shutter LASER close
14:55:26 Received message from Camera: op=State serial=197243
14:55:26 GetSingleValue result=40  Value=cccccccc
14:55:26 SkyScan query
14:55:26 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:55:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:55:26 Parameters OK
14:55:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:55:26 Set A/D data flow result=40
14:55:26 Set A/D channel type result=40
14:55:26 Set A/D encoding result=40
14:55:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:55:26 Set channel filter=0.000000e+000  result=40
14:55:26 Config A/D  Result=40
14:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:55:26 Get A/D filter: -9.255963e+061  result=40
14:55:26 Get A/D value=-858993460  result=40
14:55:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:55:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:55:26 Parameters OK
14:55:26 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:55:26 Set A/D data flow result=40
14:55:26 Set A/D channel type result=40
14:55:26 Set A/D encoding result=40
14:55:26 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:55:26 Set channel filter=0.000000e+000  result=40
14:55:26 Config A/D  Result=40
14:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:55:26 Get A/D filter: -9.255963e+061  result=40
14:55:26 Get A/D value=-858993460  result=40
14:55:26 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:55:26 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:55:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:55:26 Aux=
14:55:26 Message to Camera, serial 197243 queued
14:56:03 Received message from Master: op=PointingHead serial=197256
14:56:03 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:56:03 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:56:03 Point started: ret=0
14:56:03 point_skyscan result=0
14:56:04 Check angles
14:56:04 SkyScan query
14:56:05 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:56:05 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:56:05 Message to Master queued w/err=0: serial=197256 error=0
14:56:10 Received message from Master: op=Filter serial=197257
14:56:10 Color wheel filter change from 0 to 0
14:56:10 FLIGetFilterPos err=0  currentPosition=0
14:56:10 FLIGetStepsRemaining err=0  RemainingSteps=0
14:56:10 Filter is already there-color wheel unchanged
14:56:10 Received message from Master: op=Shutter serial=197258
14:56:10 Shutter LASER close
14:56:10 Received message from Camera: op=State serial=197260
14:56:10 GetSingleValue result=40  Value=cccccccc
14:56:10 SkyScan query
14:56:10 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:56:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:56:10 Parameters OK
14:56:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:56:10 Set A/D data flow result=40
14:56:10 Set A/D channel type result=40
14:56:10 Set A/D encoding result=40
14:56:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:56:10 Set channel filter=0.000000e+000  result=40
14:56:10 Config A/D  Result=40
14:56:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:56:10 Get A/D filter: -9.255963e+061  result=40
14:56:10 Get A/D value=-858993460  result=40
14:56:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:56:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:56:10 Parameters OK
14:56:10 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:56:10 Set A/D data flow result=40
14:56:10 Set A/D channel type result=40
14:56:10 Set A/D encoding result=40
14:56:10 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:56:10 Set channel filter=0.000000e+000  result=40
14:56:10 Config A/D  Result=40
14:56:10 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:56:10 Get A/D filter: -9.255963e+061  result=40
14:56:10 Get A/D value=-858993460  result=40
14:56:10 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:56:10 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:56:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:56:10 Aux=
14:56:10 Message to Camera, serial 197260 queued
14:56:47 Received message from Master: op=PointingHead serial=197273
14:56:47 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:56:47 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:56:48 Point started: ret=0
14:56:48 point_skyscan result=0
14:56:48 Check angles
14:56:48 SkyScan query
14:56:49 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:56:49 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:56:49 Message to Master queued w/err=0: serial=197273 error=0
14:56:54 Received message from Master: op=Filter serial=197274
14:56:54 Color wheel filter change from 0 to 0
14:56:54 FLIGetFilterPos err=0  currentPosition=0
14:56:54 FLIGetStepsRemaining err=0  RemainingSteps=0
14:56:54 Filter is already there-color wheel unchanged
14:56:54 Received message from Master: op=Shutter serial=197275
14:56:54 Shutter LASER close
14:56:54 Received message from Camera: op=State serial=197277
14:56:54 GetSingleValue result=40  Value=cccccccc
14:56:54 SkyScan query
14:56:55 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:56:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:56:55 Parameters OK
14:56:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:56:55 Set A/D data flow result=40
14:56:55 Set A/D channel type result=40
14:56:55 Set A/D encoding result=40
14:56:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:56:55 Set channel filter=0.000000e+000  result=40
14:56:55 Config A/D  Result=40
14:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:56:55 Get A/D filter: -9.255963e+061  result=40
14:56:55 Get A/D value=-858993460  result=40
14:56:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:56:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:56:55 Parameters OK
14:56:55 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:56:55 Set A/D data flow result=40
14:56:55 Set A/D channel type result=40
14:56:55 Set A/D encoding result=40
14:56:55 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:56:55 Set channel filter=0.000000e+000  result=40
14:56:55 Config A/D  Result=40
14:56:55 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:56:55 Get A/D filter: -9.255963e+061  result=40
14:56:55 Get A/D value=-858993460  result=40
14:56:55 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:56:55 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:56:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:56:55 Aux=
14:56:55 Message to Camera, serial 197277 queued
14:57:32 Received message from Master: op=PointingHead serial=197290
14:57:32 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
14:57:32 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
14:57:32 Point started: ret=0
14:57:32 point_skyscan result=0
14:57:33 Check angles
14:57:33 SkyScan query
14:57:33 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
14:57:33 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
14:57:33 Check angles
14:57:33 SkyScan query
14:57:34 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.79<-14986  Statuses=0008 0009
14:57:34 Msec=750  True Az=112.995  Ze=-44.79  Az status=0008  Ze status=0009
14:57:34 Check angles
14:57:34 SkyScan query
14:57:35 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.73<-16382  Statuses=0008 0009
14:57:35 Msec=1500  True Az=112.995  Ze=-65.73  Az status=0008  Ze status=0009
14:57:35 Check angles
14:57:35 SkyScan query
14:57:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.67<-17778  Statuses=0008 0009
14:57:36 Msec=2250  True Az=112.995  Ze=-86.67  Az status=0008  Ze status=0009
14:57:36 Check angles
14:57:36 SkyScan query
14:57:36 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.655<-19177  Statuses=0008 0009
14:57:36 Msec=3000  True Az=112.995  Ze=-107.655  Az status=0008  Ze status=0009
14:57:36 Check angles
14:57:36 SkyScan query
14:57:37 SkyScan query done: ret=0  az=112.995<-7533  ze=-128.58<-20572  Statuses=0008 0009
14:57:37 Msec=3750  True Az=112.995  Ze=-128.58  Az status=0008  Ze status=0009
14:57:37 Check angles
14:57:37 SkyScan query
14:57:38 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.55<-21970  Statuses=0008 0009
14:57:38 Msec=4500  True Az=112.995  Ze=-149.55  Az status=0008  Ze status=0009
14:57:38 Check angles
14:57:38 SkyScan query
14:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.49<-23366  Statuses=0008 0009
14:57:39 Msec=5250  True Az=112.995  Ze=-170.49  Az status=0008  Ze status=0009
14:57:39 Check angles
14:57:39 SkyScan query
14:57:39 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
14:57:39 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
14:57:39 Message to Master queued w/err=0: serial=197290 error=0
14:57:44 Received message from Master: op=Filter serial=197291
14:57:44 Color wheel filter change from 0 to 0
14:57:44 FLIGetFilterPos err=0  currentPosition=0
14:57:44 FLIGetStepsRemaining err=0  RemainingSteps=0
14:57:44 Filter is already there-color wheel unchanged
14:57:44 Received message from Master: op=Shutter serial=197292
14:57:44 Shutter LASER open
14:57:45 Received message from Camera: op=State serial=197294
14:57:45 GetSingleValue result=40  Value=cccccccc
14:57:45 SkyScan query
14:57:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
14:57:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:57:45 Parameters OK
14:57:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:57:45 Set A/D data flow result=40
14:57:45 Set A/D channel type result=40
14:57:45 Set A/D encoding result=40
14:57:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:57:45 Set channel filter=0.000000e+000  result=40
14:57:45 Config A/D  Result=40
14:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:57:45 Get A/D filter: -9.255963e+061  result=40
14:57:45 Get A/D value=-858993460  result=40
14:57:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:57:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:57:45 Parameters OK
14:57:45 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:57:45 Set A/D data flow result=40
14:57:45 Set A/D channel type result=40
14:57:45 Set A/D encoding result=40
14:57:45 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:57:45 Set channel filter=0.000000e+000  result=40
14:57:45 Config A/D  Result=40
14:57:45 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:57:45 Get A/D filter: -9.255963e+061  result=40
14:57:45 Get A/D value=-858993460  result=40
14:57:45 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:57:45 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:57:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:57:45 Aux=
14:57:45 Message to Camera, serial 197294 queued
14:57:53 Received message from Master: op=Shutter serial=197303
14:57:53 Shutter LASER close
14:57:53 Received message from Master: op=PointingHead serial=197307
14:57:53 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:57:53 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:57:54 Point started: ret=0
14:57:54 point_skyscan result=0
14:57:54 Check angles
14:57:54 SkyScan query
14:57:55 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.19<-21546  Statuses=0008 0009
14:57:55 Msec=0  True Az=112.995  Ze=-143.19  Az status=0008  Ze status=0009
14:57:55 Check angles
14:57:55 SkyScan query
14:57:56 SkyScan query done: ret=0  az=112.995<-7533  ze=-122.22<-20148  Statuses=0008 0009
14:57:56 Msec=750  True Az=112.995  Ze=-122.22  Az status=0008  Ze status=0009
14:57:56 Check angles
14:57:56 SkyScan query
14:57:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.86<-18724  Statuses=0008 0009
14:57:57 Msec=1500  True Az=112.995  Ze=-100.86  Az status=0008  Ze status=0009
14:57:57 Check angles
14:57:57 SkyScan query
14:57:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.905<-17327  Statuses=0008 0009
14:57:57 Msec=2250  True Az=112.995  Ze=-79.905  Az status=0008  Ze status=0009
14:57:57 Check angles
14:57:57 SkyScan query
14:57:58 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.5<-15900  Statuses=0008 0009
14:57:58 Msec=3000  True Az=112.995  Ze=-58.5  Az status=0008  Ze status=0009
14:57:58 Check angles
14:57:58 SkyScan query
14:57:59 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.56<-14504  Statuses=0008 0009
14:57:59 Msec=3750  True Az=112.995  Ze=-37.56  Az status=0008  Ze status=0009
14:57:59 Check angles
14:57:59 SkyScan query
14:58:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.575<-13105  Statuses=0008 0009
14:58:00 Msec=4500  True Az=112.995  Ze=-16.575  Az status=0008  Ze status=0009
14:58:00 Check angles
14:58:00 SkyScan query
14:58:00 SkyScan query done: ret=0  az=112.995<-7533  ze=4.65<-11690  Statuses=0008 0009
14:58:00 Msec=5250  True Az=112.995  Ze=4.65  Az status=0008  Ze status=0009
14:58:00 Check angles
14:58:00 SkyScan query
14:58:01 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
14:58:01 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
14:58:01 Message to Master queued w/err=0: serial=197307 error=0
14:58:06 Received message from Master: op=Filter serial=197308
14:58:06 Color wheel filter change from 0 to 0
14:58:06 FLIGetFilterPos err=0  currentPosition=0
14:58:06 FLIGetStepsRemaining err=0  RemainingSteps=0
14:58:06 Filter is already there-color wheel unchanged
14:58:06 Received message from Master: op=Shutter serial=197309
14:58:06 Shutter LASER close
14:58:06 Received message from Camera: op=State serial=197311
14:58:06 GetSingleValue result=40  Value=cccccccc
14:58:06 SkyScan query
14:58:07 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:58:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:58:07 Parameters OK
14:58:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:58:07 Set A/D data flow result=40
14:58:07 Set A/D channel type result=40
14:58:07 Set A/D encoding result=40
14:58:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:58:07 Set channel filter=0.000000e+000  result=40
14:58:07 Config A/D  Result=40
14:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:58:07 Get A/D filter: -9.255963e+061  result=40
14:58:07 Get A/D value=-858993460  result=40
14:58:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:58:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:58:07 Parameters OK
14:58:07 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:58:07 Set A/D data flow result=40
14:58:07 Set A/D channel type result=40
14:58:07 Set A/D encoding result=40
14:58:07 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:58:07 Set channel filter=0.000000e+000  result=40
14:58:07 Config A/D  Result=40
14:58:07 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:58:07 Get A/D filter: -9.255963e+061  result=40
14:58:07 Get A/D value=-858993460  result=40
14:58:07 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:58:07 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:58:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:58:07 Aux=
14:58:07 Message to Camera, serial 197311 queued
14:58:44 Received message from Master: op=PointingHead serial=197324
14:58:44 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
14:58:44 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
14:58:44 Point started: ret=0
14:58:44 point_skyscan result=0
14:58:45 Check angles
14:58:45 SkyScan query
14:58:45 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:58:45 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
14:58:45 Message to Master queued w/err=0: serial=197324 error=0
14:58:50 Received message from Master: op=Filter serial=197325
14:58:50 Color wheel filter change from 0 to 0
14:58:50 FLIGetFilterPos err=0  currentPosition=0
14:58:50 FLIGetStepsRemaining err=0  RemainingSteps=0
14:58:50 Filter is already there-color wheel unchanged
14:58:51 Received message from Master: op=Shutter serial=197326
14:58:51 Shutter LASER close
14:58:51 Received message from Camera: op=State serial=197328
14:58:51 GetSingleValue result=40  Value=cccccccc
14:58:51 SkyScan query
14:58:51 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
14:58:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:58:51 Parameters OK
14:58:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:58:51 Set A/D data flow result=40
14:58:51 Set A/D channel type result=40
14:58:51 Set A/D encoding result=40
14:58:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:58:51 Set channel filter=0.000000e+000  result=40
14:58:51 Config A/D  Result=40
14:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:58:51 Get A/D filter: -9.255963e+061  result=40
14:58:51 Get A/D value=-858993460  result=40
14:58:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:58:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:58:51 Parameters OK
14:58:51 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:58:51 Set A/D data flow result=40
14:58:51 Set A/D channel type result=40
14:58:51 Set A/D encoding result=40
14:58:51 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:58:51 Set channel filter=0.000000e+000  result=40
14:58:51 Config A/D  Result=40
14:58:51 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:58:51 Get A/D filter: -9.255963e+061  result=40
14:58:51 Get A/D value=-858993460  result=40
14:58:51 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:58:51 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:58:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:58:51 Aux=
14:58:51 Message to Camera, serial 197328 queued
14:59:28 Received message from Master: op=PointingHead serial=197341
14:59:28 Move0 PH to az=-9.876540e-035 (-4.000000e+000)  zen=0.000000e+000 (6.500000e+000)
14:59:28 SkyScan point: az=-4->11733  ze=6.5->12433  Resp=0
14:59:28 Point started: ret=0
14:59:28 point_skyscan result=0
14:59:29 Check angles
14:59:29 SkyScan query
14:59:30 SkyScan query done: ret=0  az=136.335<-9089  ze=-6.51<-12434  Statuses=0009 0008
14:59:30 Msec=0  True Az=136.335  Ze=-6.51  Az status=0009  Ze status=0008
14:59:30 Check angles
14:59:30 SkyScan query
14:59:31 SkyScan query done: ret=0  az=153.855<-10257  ze=-6.495<-12433  Statuses=0009 0008
14:59:31 Msec=750  True Az=153.855  Ze=-6.495  Az status=0009  Ze status=0008
14:59:31 Check angles
14:59:31 SkyScan query
14:59:31 SkyScan query done: ret=0  az=171.255<-11417  ze=-6.495<-12433  Statuses=0009 0008
14:59:31 Msec=1500  True Az=171.255  Ze=-6.495  Az status=0009  Ze status=0008
14:59:31 Check angles
14:59:31 SkyScan query
14:59:32 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:59:32 Msec=2250  True Az=175.995  Ze=-6.495  Az status=0008  Ze status=0008
14:59:32 Message to Master queued w/err=0: serial=197341 error=0
14:59:37 Received message from Master: op=Filter serial=197342
14:59:37 Color wheel filter change from 0 to 0
14:59:37 FLIGetFilterPos err=0  currentPosition=0
14:59:37 FLIGetStepsRemaining err=0  RemainingSteps=0
14:59:37 Filter is already there-color wheel unchanged
14:59:37 Received message from Master: op=Shutter serial=197343
14:59:37 Shutter LASER close
14:59:37 Received message from Camera: op=State serial=197345
14:59:37 GetSingleValue result=40  Value=cccccccc
14:59:37 SkyScan query
14:59:38 SkyScan query done: ret=0  az=175.995<-11733  ze=-6.495<-12433  Statuses=0008 0008
14:59:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:59:38 Parameters OK
14:59:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:59:38 Set A/D data flow result=40
14:59:38 Set A/D channel type result=40
14:59:38 Set A/D encoding result=40
14:59:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:59:38 Set channel filter=0.000000e+000  result=40
14:59:38 Config A/D  Result=40
14:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:59:38 Get A/D filter: -9.255963e+061  result=40
14:59:38 Get A/D value=-858993460  result=40
14:59:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:59:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
14:59:38 Parameters OK
14:59:38 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
14:59:38 Set A/D data flow result=40
14:59:38 Set A/D channel type result=40
14:59:38 Set A/D encoding result=40
14:59:38 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
14:59:38 Set channel filter=0.000000e+000  result=40
14:59:38 Config A/D  Result=40
14:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
14:59:38 Get A/D filter: -9.255963e+061  result=40
14:59:38 Get A/D value=-858993460  result=40
14:59:38 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
14:59:38 PH type=1  Digital in=000000  Instrument Az=175.994995 deg  Ze=-6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
14:59:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
14:59:38 Aux=
14:59:38 Message to Camera, serial 197345 queued
15:00:15 Received message from Master: op=PointingHead serial=197358
15:00:15 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
15:00:15 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
15:00:15 Point started: ret=0
15:00:15 point_skyscan result=0
15:00:16 Check angles
15:00:16 SkyScan query
15:00:16 SkyScan query done: ret=0  az=153.135<-10209  ze=6.51<-11566  Statuses=0009 0008
15:00:16 Msec=0  True Az=153.135  Ze=6.51  Az status=0009  Ze status=0008
15:00:17 Check angles
15:00:17 SkyScan query
15:00:17 SkyScan query done: ret=0  az=135.735<-9049  ze=6.495<-11567  Statuses=0009 0008
15:00:17 Msec=750  True Az=135.735  Ze=6.495  Az status=0009  Ze status=0008
15:00:17 Check angles
15:00:17 SkyScan query
15:00:18 SkyScan query done: ret=0  az=118.17<-7878  ze=6.495<-11567  Statuses=0009 0008
15:00:18 Msec=1500  True Az=118.17  Ze=6.495  Az status=0009  Ze status=0008
15:00:18 Check angles
15:00:18 SkyScan query
15:00:19 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:00:19 Msec=2250  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
15:00:19 Message to Master queued w/err=0: serial=197358 error=0
15:00:24 Received message from Master: op=Filter serial=197359
15:00:24 Color wheel filter change from 0 to 0
15:00:24 FLIGetFilterPos err=0  currentPosition=0
15:00:24 FLIGetStepsRemaining err=0  RemainingSteps=0
15:00:24 Filter is already there-color wheel unchanged
15:00:24 Received message from Master: op=Shutter serial=197360
15:00:24 Shutter LASER close
15:00:24 Received message from Camera: op=State serial=197362
15:00:24 GetSingleValue result=40  Value=cccccccc
15:00:24 SkyScan query
15:00:24 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:00:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:00:24 Parameters OK
15:00:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:00:24 Set A/D data flow result=40
15:00:24 Set A/D channel type result=40
15:00:24 Set A/D encoding result=40
15:00:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:00:24 Set channel filter=0.000000e+000  result=40
15:00:24 Config A/D  Result=40
15:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:00:24 Get A/D filter: -9.255963e+061  result=40
15:00:24 Get A/D value=-858993460  result=40
15:00:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:00:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:00:24 Parameters OK
15:00:24 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:00:24 Set A/D data flow result=40
15:00:24 Set A/D channel type result=40
15:00:24 Set A/D encoding result=40
15:00:24 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:00:24 Set channel filter=0.000000e+000  result=40
15:00:24 Config A/D  Result=40
15:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:00:24 Get A/D filter: -9.255963e+061  result=40
15:00:24 Get A/D value=-858993460  result=40
15:00:24 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:00:24 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:00:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:00:24 Aux=
15:00:24 Message to Camera, serial 197362 queued
15:01:01 Received message from Master: op=PointingHead serial=197375
15:01:01 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
15:01:01 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
15:01:02 Point started: ret=0
15:01:02 point_skyscan result=0
15:01:02 Check angles
15:01:02 SkyScan query
15:01:03 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.565<-13571  Statuses=0008 0009
15:01:03 Msec=0  True Az=112.995  Ze=-23.565  Az status=0008  Ze status=0009
15:01:03 Check angles
15:01:03 SkyScan query
15:01:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.94<-14996  Statuses=0008 0009
15:01:04 Msec=750  True Az=112.995  Ze=-44.94  Az status=0008  Ze status=0009
15:01:04 Check angles
15:01:04 SkyScan query
15:01:04 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.91<-16394  Statuses=0008 0009
15:01:04 Msec=1500  True Az=112.995  Ze=-65.91  Az status=0008  Ze status=0009
15:01:05 Check angles
15:01:05 SkyScan query
15:01:05 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.835<-17789  Statuses=0008 0009
15:01:05 Msec=2250  True Az=112.995  Ze=-86.835  Az status=0008  Ze status=0009
15:01:05 Check angles
15:01:05 SkyScan query
15:01:06 SkyScan query done: ret=0  az=112.995<-7533  ze=-108.24<-19216  Statuses=0008 0009
15:01:06 Msec=3000  True Az=112.995  Ze=-108.24  Az status=0008  Ze status=0009
15:01:06 Check angles
15:01:06 SkyScan query
15:01:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.195<-20613  Statuses=0008 0009
15:01:07 Msec=3750  True Az=112.995  Ze=-129.195  Az status=0008  Ze status=0009
15:01:07 Check angles
15:01:07 SkyScan query
15:01:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-150.15<-22010  Statuses=0008 0009
15:01:07 Msec=4500  True Az=112.995  Ze=-150.15  Az status=0008  Ze status=0009
15:01:08 Check angles
15:01:08 SkyScan query
15:01:08 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.97<-23398  Statuses=0008 0009
15:01:08 Msec=5250  True Az=112.995  Ze=-170.97  Az status=0008  Ze status=0009
15:01:08 Check angles
15:01:08 SkyScan query
15:01:09 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
15:01:09 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
15:01:09 Message to Master queued w/err=0: serial=197375 error=0
15:01:14 Received message from Master: op=Filter serial=197376
15:01:14 Color wheel filter change from 0 to 0
15:01:14 FLIGetFilterPos err=0  currentPosition=0
15:01:14 FLIGetStepsRemaining err=0  RemainingSteps=0
15:01:14 Filter is already there-color wheel unchanged
15:01:14 Received message from Master: op=Shutter serial=197377
15:01:14 Shutter LASER open
15:01:14 Received message from Camera: op=State serial=197379
15:01:14 GetSingleValue result=40  Value=cccccccc
15:01:14 SkyScan query
15:01:15 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
15:01:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:01:15 Parameters OK
15:01:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:01:15 Set A/D data flow result=40
15:01:15 Set A/D channel type result=40
15:01:15 Set A/D encoding result=40
15:01:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:01:15 Set channel filter=0.000000e+000  result=40
15:01:15 Config A/D  Result=40
15:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:01:15 Get A/D filter: -9.255963e+061  result=40
15:01:15 Get A/D value=-858993460  result=40
15:01:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:01:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:01:15 Parameters OK
15:01:15 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:01:15 Set A/D data flow result=40
15:01:15 Set A/D channel type result=40
15:01:15 Set A/D encoding result=40
15:01:15 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:01:15 Set channel filter=0.000000e+000  result=40
15:01:15 Config A/D  Result=40
15:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:01:15 Get A/D filter: -9.255963e+061  result=40
15:01:15 Get A/D value=-858993460  result=40
15:01:15 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:01:15 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:01:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:01:15 Aux=
15:01:15 Message to Camera, serial 197379 queued
15:01:23 Received message from Master: op=Shutter serial=197389
15:01:23 Shutter LASER close
15:01:24 Received message from Master: op=PointingHead serial=197393
15:01:24 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
15:01:24 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
15:01:24 Point started: ret=0
15:01:24 point_skyscan result=0
15:01:25 Check angles
15:01:25 SkyScan query
15:01:25 SkyScan query done: ret=0  az=112.995<-7533  ze=-143.16<-21544  Statuses=0008 0009
15:01:25 Msec=0  True Az=112.995  Ze=-143.16  Az status=0008  Ze status=0009
15:01:26 Check angles
15:01:26 SkyScan query
15:01:26 SkyScan query done: ret=0  az=112.995<-7533  ze=-121.74<-20116  Statuses=0008 0009
15:01:26 Msec=750  True Az=112.995  Ze=-121.74  Az status=0008  Ze status=0009
15:01:26 Check angles
15:01:26 SkyScan query
15:01:27 SkyScan query done: ret=0  az=112.995<-7533  ze=-100.83<-18722  Statuses=0008 0009
15:01:27 Msec=1500  True Az=112.995  Ze=-100.83  Az status=0008  Ze status=0009
15:01:27 Check angles
15:01:27 SkyScan query
15:01:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-79.875<-17325  Statuses=0008 0009
15:01:28 Msec=2250  True Az=112.995  Ze=-79.875  Az status=0008  Ze status=0009
15:01:28 Check angles
15:01:28 SkyScan query
15:01:28 SkyScan query done: ret=0  az=112.995<-7533  ze=-58.92<-15928  Statuses=0008 0009
15:01:28 Msec=3000  True Az=112.995  Ze=-58.92  Az status=0008  Ze status=0009
15:01:29 Check angles
15:01:29 SkyScan query
15:01:29 SkyScan query done: ret=0  az=112.995<-7533  ze=-37.53<-14502  Statuses=0008 0009
15:01:29 Msec=3750  True Az=112.995  Ze=-37.53  Az status=0008  Ze status=0009
15:01:29 Check angles
15:01:29 SkyScan query
15:01:30 SkyScan query done: ret=0  az=112.995<-7533  ze=-16.545<-13103  Statuses=0008 0009
15:01:30 Msec=4500  True Az=112.995  Ze=-16.545  Az status=0008  Ze status=0009
15:01:30 Check angles
15:01:30 SkyScan query
15:01:31 SkyScan query done: ret=0  az=112.995<-7533  ze=4.335<-11711  Statuses=0008 0009
15:01:31 Msec=5250  True Az=112.995  Ze=4.335  Az status=0008  Ze status=0009
15:01:31 Check angles
15:01:31 SkyScan query
15:01:31 SkyScan query done: ret=0  az=112.995<-7533  ze=6.51<-11566  Statuses=0008 0008
15:01:31 Msec=6000  True Az=112.995  Ze=6.51  Az status=0008  Ze status=0008
15:01:31 Message to Master queued w/err=0: serial=197393 error=0
15:01:36 Received message from Master: op=Filter serial=197394
15:01:36 Color wheel filter change from 0 to 0
15:01:36 FLIGetFilterPos err=0  currentPosition=0
15:01:36 FLIGetStepsRemaining err=0  RemainingSteps=0
15:01:36 Filter is already there-color wheel unchanged
15:01:37 Received message from Master: op=Shutter serial=197395
15:01:37 Shutter LASER close
15:01:37 Received message from Camera: op=State serial=197397
15:01:37 GetSingleValue result=40  Value=cccccccc
15:01:37 SkyScan query
15:01:37 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:01:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:01:37 Parameters OK
15:01:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:01:37 Set A/D data flow result=40
15:01:37 Set A/D channel type result=40
15:01:37 Set A/D encoding result=40
15:01:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:01:37 Set channel filter=0.000000e+000  result=40
15:01:37 Config A/D  Result=40
15:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:01:37 Get A/D filter: -9.255963e+061  result=40
15:01:37 Get A/D value=-858993460  result=40
15:01:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:01:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:01:37 Parameters OK
15:01:37 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:01:37 Set A/D data flow result=40
15:01:37 Set A/D channel type result=40
15:01:37 Set A/D encoding result=40
15:01:37 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:01:37 Set channel filter=0.000000e+000  result=40
15:01:37 Config A/D  Result=40
15:01:37 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:01:37 Get A/D filter: -9.255963e+061  result=40
15:01:37 Get A/D value=-858993460  result=40
15:01:37 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:01:37 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:01:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:01:37 Aux=
15:01:37 Message to Camera, serial 197397 queued
15:02:14 Received message from Master: op=PointingHead serial=197410
15:02:14 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
15:02:14 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
15:02:15 Point started: ret=0
15:02:15 point_skyscan result=0
15:02:15 Check angles
15:02:15 SkyScan query
15:02:16 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:02:16 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
15:02:16 Message to Master queued w/err=0: serial=197410 error=0
15:02:21 Received message from Master: op=Filter serial=197411
15:02:21 Color wheel filter change from 0 to 0
15:02:21 FLIGetFilterPos err=0  currentPosition=0
15:02:21 FLIGetStepsRemaining err=0  RemainingSteps=0
15:02:21 Filter is already there-color wheel unchanged
15:02:21 Received message from Master: op=Shutter serial=197412
15:02:21 Shutter LASER close
15:02:21 Received message from Camera: op=State serial=197414
15:02:21 GetSingleValue result=40  Value=cccccccc
15:02:21 SkyScan query
15:02:22 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:02:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:02:22 Parameters OK
15:02:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:02:22 Set A/D data flow result=40
15:02:22 Set A/D channel type result=40
15:02:22 Set A/D encoding result=40
15:02:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:02:22 Set channel filter=0.000000e+000  result=40
15:02:22 Config A/D  Result=40
15:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:02:22 Get A/D filter: -9.255963e+061  result=40
15:02:22 Get A/D value=-858993460  result=40
15:02:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:02:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:02:22 Parameters OK
15:02:22 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:02:22 Set A/D data flow result=40
15:02:22 Set A/D channel type result=40
15:02:22 Set A/D encoding result=40
15:02:22 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:02:22 Set channel filter=0.000000e+000  result=40
15:02:22 Config A/D  Result=40
15:02:22 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:02:22 Get A/D filter: -9.255963e+061  result=40
15:02:22 Get A/D value=-858993460  result=40
15:02:22 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:02:22 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:02:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:02:22 Aux=
15:02:22 Message to Camera, serial 197414 queued
15:02:59 Received message from Master: op=PointingHead serial=197427
15:02:59 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=0.000000e+000 (6.500000e+000)
15:02:59 SkyScan point: az=113->7533  ze=6.5->11567  Resp=0
15:02:59 Point started: ret=0
15:02:59 point_skyscan result=0
15:03:00 Check angles
15:03:00 SkyScan query
15:03:00 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:03:00 Msec=0  True Az=112.995  Ze=6.495  Az status=0008  Ze status=0008
15:03:00 Message to Master queued w/err=0: serial=197427 error=0
15:03:05 Received message from Master: op=Filter serial=197428
15:03:05 Color wheel filter change from 0 to 0
15:03:05 FLIGetFilterPos err=0  currentPosition=0
15:03:05 FLIGetStepsRemaining err=0  RemainingSteps=0
15:03:05 Filter is already there-color wheel unchanged
15:03:05 Received message from Master: op=Shutter serial=197429
15:03:05 Shutter LASER close
15:03:05 Received message from Camera: op=State serial=197431
15:03:05 GetSingleValue result=40  Value=cccccccc
15:03:05 SkyScan query
15:03:06 SkyScan query done: ret=0  az=112.995<-7533  ze=6.495<-11567  Statuses=0008 0008
15:03:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:03:06 Parameters OK
15:03:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:03:06 Set A/D data flow result=40
15:03:06 Set A/D channel type result=40
15:03:06 Set A/D encoding result=40
15:03:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:03:06 Set channel filter=0.000000e+000  result=40
15:03:06 Config A/D  Result=40
15:03:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:03:06 Get A/D filter: -9.255963e+061  result=40
15:03:06 Get A/D value=-858993460  result=40
15:03:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:03:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:03:06 Parameters OK
15:03:06 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:03:06 Set A/D data flow result=40
15:03:06 Set A/D channel type result=40
15:03:06 Set A/D encoding result=40
15:03:06 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:03:06 Set channel filter=0.000000e+000  result=40
15:03:06 Config A/D  Result=40
15:03:06 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:03:06 Get A/D filter: -9.255963e+061  result=40
15:03:06 Get A/D value=-858993460  result=40
15:03:06 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:03:06 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=6.495000 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:03:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:03:06 Aux=
15:03:06 Message to Camera, serial 197431 queued
15:03:36 Received message from Master: op=Identify serial=197434
15:03:43 Received message from Master: op=PointingHead serial=197447
15:03:43 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
15:03:43 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
15:03:44 Point started: ret=0
15:03:44 point_skyscan result=0
15:03:44 Check angles
15:03:44 SkyScan query
15:03:45 SkyScan query done: ret=0  az=112.995<-7533  ze=-23.385<-13559  Statuses=0008 0009
15:03:45 Msec=0  True Az=112.995  Ze=-23.385  Az status=0008  Ze status=0009
15:03:45 Check angles
15:03:45 SkyScan query
15:03:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-44.775<-14985  Statuses=0008 0009
15:03:46 Msec=750  True Az=112.995  Ze=-44.775  Az status=0008  Ze status=0009
15:03:46 Check angles
15:03:46 SkyScan query
15:03:46 SkyScan query done: ret=0  az=112.995<-7533  ze=-65.745<-16383  Statuses=0008 0009
15:03:46 Msec=1500  True Az=112.995  Ze=-65.745  Az status=0008  Ze status=0009
15:03:47 Check angles
15:03:47 SkyScan query
15:03:47 SkyScan query done: ret=0  az=112.995<-7533  ze=-86.685<-17779  Statuses=0008 0009
15:03:47 Msec=2250  True Az=112.995  Ze=-86.685  Az status=0008  Ze status=0009
15:03:47 Check angles
15:03:47 SkyScan query
15:03:48 SkyScan query done: ret=0  az=112.995<-7533  ze=-107.64<-19176  Statuses=0008 0009
15:03:48 Msec=3000  True Az=112.995  Ze=-107.64  Az status=0008  Ze status=0009
15:03:48 Check angles
15:03:48 SkyScan query
15:03:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-129.03<-20602  Statuses=0008 0009
15:03:49 Msec=3750  True Az=112.995  Ze=-129.03  Az status=0008  Ze status=0009
[UTC 2019-3-9  15:03:49]
15:03:49 Check angles
15:03:49 SkyScan query
15:03:49 SkyScan query done: ret=0  az=112.995<-7533  ze=-149.985<-21999  Statuses=0008 0009
15:03:49 Msec=4500  True Az=112.995  Ze=-149.985  Az status=0008  Ze status=0009
15:03:50 Check angles
15:03:50 SkyScan query
15:03:50 SkyScan query done: ret=0  az=112.995<-7533  ze=-170.85<-23390  Statuses=0008 0009
15:03:50 Msec=5250  True Az=112.995  Ze=-170.85  Az status=0008  Ze status=0009
15:03:50 Check angles
15:03:50 SkyScan query
15:03:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-173.01<-23534  Statuses=0008 0008
15:03:51 Msec=6000  True Az=112.995  Ze=-173.01  Az status=0008  Ze status=0008
15:03:51 Message to Master queued w/err=0: serial=197447 error=0
15:03:56 Received message from Master: op=Filter serial=197448
15:03:56 Color wheel filter change from 0 to 2
15:03:56 FLIGetFilterPos err=0  currentPosition=0
15:03:56 FLIGetStepsRemaining err=0  RemainingSteps=0
15:03:59 FLISetFilterPos err=0  rqPosition=2
15:03:59 FLIGetStepsRemaining err=0  RemainingSteps=0
15:03:59 Check after 0.00 sec for filter wheel  DIn/CWh=0
15:03:59 FLIGetFilterPos err=0  currentPosition=2
15:03:59 FLIGetStepsRemaining err=0  RemainingSteps=0
15:03:59 Received message from Master: op=Shutter serial=197449
15:03:59 Shutter LASER close
15:03:59 Received message from Camera: op=State serial=197451
15:03:59 GetSingleValue result=40  Value=cccccccc
15:03:59 SkyScan query
15:04:00 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
15:04:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:04:00 Parameters OK
15:04:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:04:00 Set A/D data flow result=40
15:04:00 Set A/D channel type result=40
15:04:00 Set A/D encoding result=40
15:04:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:04:00 Set channel filter=0.000000e+000  result=40
15:04:00 Config A/D  Result=40
15:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:04:00 Get A/D filter: -9.255963e+061  result=40
15:04:00 Get A/D value=-858993460  result=40
15:04:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:04:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:04:00 Parameters OK
15:04:00 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:04:00 Set A/D data flow result=40
15:04:00 Set A/D channel type result=40
15:04:00 Set A/D encoding result=40
15:04:00 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:04:00 Set channel filter=0.000000e+000  result=40
15:04:00 Config A/D  Result=40
15:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:04:00 Get A/D filter: -9.255963e+061  result=40
15:04:00 Get A/D value=-858993460  result=40
15:04:00 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:04:00 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:04:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:04:00 Aux=
15:04:00 Message to Camera, serial 197451 queued
15:04:06 Received message from Master: op=PointingHead serial=197462
15:04:06 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
15:04:06 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
15:04:06 Point started: ret=0
15:04:06 point_skyscan result=0
15:04:07 Check angles
15:04:07 SkyScan query
15:04:07 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
15:04:07 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
15:04:07 Message to Master queued w/err=0: serial=197462 error=0
15:04:12 Received message from Master: op=Filter serial=197463
15:04:12 Color wheel filter change from 2 to 2
15:04:12 FLIGetFilterPos err=0  currentPosition=2
15:04:12 FLIGetStepsRemaining err=0  RemainingSteps=0
15:04:12 Filter is already there-color wheel unchanged
15:04:13 Received message from Master: op=Shutter serial=197464
15:04:13 Shutter LASER close
15:04:13 Received message from Camera: op=State serial=197466
15:04:13 GetSingleValue result=40  Value=cccccccc
15:04:13 SkyScan query
15:04:13 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
15:04:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:04:13 Parameters OK
15:04:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:04:13 Set A/D data flow result=40
15:04:13 Set A/D channel type result=40
15:04:13 Set A/D encoding result=40
15:04:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:04:13 Set channel filter=0.000000e+000  result=40
15:04:13 Config A/D  Result=40
15:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:04:13 Get A/D filter: -9.255963e+061  result=40
15:04:13 Get A/D value=-858993460  result=40
15:04:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:04:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:04:13 Parameters OK
15:04:13 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:04:13 Set A/D data flow result=40
15:04:13 Set A/D channel type result=40
15:04:13 Set A/D encoding result=40
15:04:13 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:04:13 Set channel filter=0.000000e+000  result=40
15:04:13 Config A/D  Result=40
15:04:13 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:04:13 Get A/D filter: -9.255963e+061  result=40
15:04:13 Get A/D value=-858993460  result=40
15:04:13 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:04:13 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:04:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:04:13 Aux=
15:04:13 Message to Camera, serial 197466 queued
15:04:49 Received message from Master: op=PointingHead serial=197478
15:04:49 Move0 PH to az=1.170000e+002 (1.130000e+002)  zen=-1.795000e+002 (-1.730000e+002)
15:04:49 SkyScan point: az=113->7533  ze=-173->23533  Resp=0
15:04:50 Point started: ret=0
15:04:50 point_skyscan result=0
15:04:50 Check angles
15:04:50 SkyScan query
15:04:51 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
15:04:51 Msec=0  True Az=112.995  Ze=-172.995  Az status=0008  Ze status=0008
15:04:51 Message to Master queued w/err=0: serial=197478 error=0
15:04:56 Received message from Master: op=Filter serial=197479
15:04:56 Color wheel filter change from 2 to 2
15:04:56 FLIGetFilterPos err=0  currentPosition=2
15:04:56 FLIGetStepsRemaining err=0  RemainingSteps=0
15:04:56 Filter is already there-color wheel unchanged
15:04:56 Received message from Master: op=Shutter serial=197480
15:04:56 Shutter LASER close
15:04:56 Received message from Camera: op=State serial=197482
15:04:56 GetSingleValue result=40  Value=cccccccc
15:04:56 SkyScan query
15:04:57 SkyScan query done: ret=0  az=112.995<-7533  ze=-172.995<-23533  Statuses=0008 0008
15:04:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:04:57 Parameters OK
15:04:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:04:57 Set A/D data flow result=40
15:04:57 Set A/D channel type result=40
15:04:57 Set A/D encoding result=40
15:04:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:04:57 Set channel filter=0.000000e+000  result=40
15:04:57 Config A/D  Result=40
15:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:04:57 Get A/D filter: -9.255963e+061  result=40
15:04:57 Get A/D value=-858993460  result=40
15:04:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:04:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000
15:04:57 Parameters OK
15:04:57 Calc range=-1.000000e+001 - 1.000000e+001  Gain=1.000000e+000
15:04:57 Set A/D data flow result=40
15:04:57 Set A/D channel type result=40
15:04:57 Set A/D encoding result=40
15:04:57 Set A/D range -1.000000e+001 - 1.000000e+001  result=40
15:04:57 Set channel filter=0.000000e+000  result=40
15:04:57 Config A/D  Result=40
15:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061  result=40
15:04:57 Get A/D filter: -9.255963e+061  result=40
15:04:57 Get A/D value=-858993460  result=40
15:04:57 Get analog voltage Code=-858993460 (2s' comp)  Voltage=-4.194304e+006 Result=40
15:04:57 PH type=1  Digital in=000000  Instrument Az=112.995003 deg  Ze=-172.994995 deg  T=-60.000000 deg  p=-10.000000  Err=0 Statuses=08 08
15:04:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5
15:04:57 Aux=
15:04:57 Message to Camera, serial 197482 queued
15:05:05 Received message from Master: op=Log close serial=197496
15:05:05 Log file close
15:05:05 * END OF LOG *